diff options
Diffstat (limited to 'drivers/acpi')
-rw-r--r-- | drivers/acpi/ec.c | 11 | ||||
-rw-r--r-- | drivers/acpi/pci_irq.c | 98 | ||||
-rw-r--r-- | drivers/acpi/processor_core.c | 16 | ||||
-rw-r--r-- | drivers/acpi/utilities/utobject.c | 2 | ||||
-rw-r--r-- | drivers/acpi/video.c | 2 |
5 files changed, 120 insertions, 9 deletions
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 7222a18..e7e197e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -129,6 +129,7 @@ static struct acpi_ec { struct mutex lock; wait_queue_head_t wait; struct list_head list; + atomic_t irq_count; u8 handlers_installed; } *boot_ec, *first_ec; @@ -181,6 +182,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { int ret = 0; + atomic_set(&ec->irq_count, 0); + if (unlikely(event == ACPI_EC_EVENT_OBF_1 && test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags))) force_poll = 1; @@ -227,6 +230,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) goto end; + msleep(5); } } pr_err(PREFIX "acpi_ec_wait timeout," @@ -529,6 +533,13 @@ static u32 acpi_ec_gpe_handler(void *data) struct acpi_ec *ec = data; pr_debug(PREFIX "~~~> interrupt\n"); + atomic_inc(&ec->irq_count); + if (atomic_read(&ec->irq_count) > 5) { + pr_err(PREFIX "GPE storm detected, disabling EC GPE\n"); + acpi_disable_gpe(NULL, ec->gpe, ACPI_ISR); + clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); + return ACPI_INTERRUPT_HANDLED; + } clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) wake_up(&ec->wait); diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 7f19859..7af414a 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -25,6 +25,7 @@ */ +#include <linux/dmi.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -76,6 +77,101 @@ static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment, return NULL; } +/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */ +static struct dmi_system_id medion_md9580[] = { + { + .ident = "Medion MD9580-F laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), + DMI_MATCH(DMI_PRODUCT_NAME, "A555"), + }, + }, + { } +}; + +/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */ +static struct dmi_system_id dell_optiplex[] = { + { + .ident = "Dell Optiplex GX1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"), + }, + }, + { } +}; + +/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */ +static struct dmi_system_id hp_t5710[] = { + { + .ident = "HP t5710", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"), + DMI_MATCH(DMI_BOARD_NAME, "098Ch"), + }, + }, + { } +}; + +struct prt_quirk { + struct dmi_system_id *system; + unsigned int segment; + unsigned int bus; + unsigned int device; + unsigned char pin; + char *source; /* according to BIOS */ + char *actual_source; +}; + +/* + * These systems have incorrect _PRT entries. The BIOS claims the PCI + * interrupt at the listed segment/bus/device/pin is connected to the first + * link device, but it is actually connected to the second. + */ +static struct prt_quirk prt_quirks[] = { + { medion_md9580, 0, 0, 9, 'A', + "\\_SB_.PCI0.ISA.LNKA", + "\\_SB_.PCI0.ISA.LNKB"}, + { dell_optiplex, 0, 0, 0xd, 'A', + "\\_SB_.LNKB", + "\\_SB_.LNKA"}, + { hp_t5710, 0, 0, 1, 'A', + "\\_SB_.PCI0.LNK1", + "\\_SB_.PCI0.LNK3"}, +}; + +static void +do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt) +{ + int i; + struct prt_quirk *quirk; + + for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) { + quirk = &prt_quirks[i]; + + /* All current quirks involve link devices, not GSIs */ + if (!prt->source) + continue; + + if (dmi_check_system(quirk->system) && + entry->id.segment == quirk->segment && + entry->id.bus == quirk->bus && + entry->id.device == quirk->device && + entry->pin + 'A' == quirk->pin && + !strcmp(prt->source, quirk->source) && + strlen(prt->source) >= strlen(quirk->actual_source)) { + printk(KERN_WARNING PREFIX "firmware reports " + "%04x:%02x:%02x[%c] connected to %s; " + "changing to %s\n", + entry->id.segment, entry->id.bus, + entry->id.device, 'A' + entry->pin, + prt->source, quirk->actual_source); + strcpy(prt->source, quirk->actual_source); + } + } +} + static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus, struct acpi_pci_routing_table *prt) @@ -96,6 +192,8 @@ acpi_pci_irq_add_entry(acpi_handle handle, entry->id.function = prt->address & 0xFFFF; entry->pin = prt->pin; + do_prt_fixups(entry, prt); + /* * Type 1: Dynamic * --------------- diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index a3cc8a9..d9316ab 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -840,17 +840,19 @@ static int is_processor_present(acpi_handle handle) status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - /* - * if a processor object does not have an _STA object, - * OSPM assumes that the processor is present. - */ - if (status == AE_NOT_FOUND) - return 1; if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) return 1; - ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present")); + /* + * _STA is mandatory for a processor that supports hot plug + */ + if (status == AE_NOT_FOUND) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Processor does not support hot plug\n")); + else + ACPI_EXCEPTION((AE_INFO, status, + "Processor Device is not present")); return 0; } diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index 76ee766..e08b3fa 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -432,7 +432,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, * element -- which is legal) */ if (!internal_object) { - *obj_length = 0; + *obj_length = sizeof(union acpi_object); return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 12cce69..ace958c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -713,7 +713,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) kfree(obj); - if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ + if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; static int count = 0; char *name; |