diff options
Diffstat (limited to 'drivers/i2c/chips/fscpos.c')
| -rw-r--r-- | drivers/i2c/chips/fscpos.c | 641 |
1 files changed, 0 insertions, 641 deletions
diff --git a/drivers/i2c/chips/fscpos.c b/drivers/i2c/chips/fscpos.c deleted file mode 100644 index 2cac791..0000000 --- a/drivers/i2c/chips/fscpos.c +++ /dev/null @@ -1,641 +0,0 @@ -/* - fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips - Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - fujitsu siemens poseidon chip, - module based on the old fscpos module by Hermann Jung <hej@odn.de> and - the fscher module by Reinhard Nissl <rnissl@gmx.de> - - original module based on lm80.c - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - and Philip Edelbrock <phil@netroedge.com> - - Thanks to Jean Delvare for reviewing my code and suggesting a lot of - improvements. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> - -/* - * Addresses to scan - */ -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ -SENSORS_INSMOD_1(fscpos); - -/* - * The FSCPOS registers - */ - -/* chip identification */ -#define FSCPOS_REG_IDENT_0 0x00 -#define FSCPOS_REG_IDENT_1 0x01 -#define FSCPOS_REG_IDENT_2 0x02 -#define FSCPOS_REG_REVISION 0x03 - -/* global control and status */ -#define FSCPOS_REG_EVENT_STATE 0x04 -#define FSCPOS_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCPOS_REG_WDOG_PRESET 0x28 -#define FSCPOS_REG_WDOG_STATE 0x23 -#define FSCPOS_REG_WDOG_CONTROL 0x21 - -/* voltages */ -#define FSCPOS_REG_VOLT_12 0x45 -#define FSCPOS_REG_VOLT_5 0x42 -#define FSCPOS_REG_VOLT_BATT 0x48 - -/* fans - the chip does not support minimum speed for fan2 */ -static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; -static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; -static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; -static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; - -/* temperatures */ -static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; -static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; - -/* - * Functions declaration - */ -static int fscpos_attach_adapter(struct i2c_adapter *adapter); -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscpos_detach_client(struct i2c_client *client); - -static int fscpos_read_value(struct i2c_client *client, u8 register); -static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value); -static struct fscpos_data *fscpos_update_device(struct device *dev); -static void fscpos_init_client(struct i2c_client *client); - -static void reset_fan_alarm(struct i2c_client *client, int nr); - -/* - * Driver data (common to all clients) - */ -static struct i2c_driver fscpos_driver = { - .owner = THIS_MODULE, - .name = "fscpos", - .id = I2C_DRIVERID_FSCPOS, - .flags = I2C_DF_NOTIFY, - .attach_adapter = fscpos_attach_adapter, - .detach_client = fscpos_detach_client, -}; - -/* - * Client data (each client gets its own) - */ -struct fscpos_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* 0 until following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 wdog_control; /* watchdog control */ - u8 wdog_state; /* watchdog status */ - u8 wdog_preset; /* watchdog preset */ - u8 volt[3]; /* 12, 5, battery current */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 pwm[2]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* Temperature */ -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); -} - -static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); -} - -static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "1\n"); -} - -static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - if (v != 1) { - dev_err(&client->dev, "temp_reset value %ld not supported. " - "Use 1 to reset the alarm!\n", v); - return -EINVAL; - } - - dev_info(&client->dev, "You used the temp_reset feature which has not " - "been proplerly tested. Please report your " - "experience to the module author.\n"); - - /* Supported value: 2 (clears the status) */ - fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2); - return count; -} - -/* Fans */ -#define RPM_FROM_REG(val) ((val) * 60) - -static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); -} - -static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); -} - -static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); -} - -static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_ripple value %ld not supported. " - "Must be one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[nr - 1] &= ~0x03; - data->fan_ripple[nr - 1] |= v; - - fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->pwm[nr - 1]); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - /* Range: 0..255 */ - if (v < 0) v = 0; - if (v > 255) v = 255; - - down(&data->update_lock); - data->pwm[nr - 1] = v; - fscpos_write_value(client, reg, data->pwm[nr - 1]); - up(&data->update_lock); - return count; -} - -static void reset_fan_alarm(struct i2c_client *client, int nr) -{ - fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); -} - -/* Volts */ -#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) - -static ssize_t show_volt_12(struct device *dev, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); -} - -static ssize_t show_volt_5(struct device *dev, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); -} - -static ssize_t show_volt_batt(struct device *dev, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); -} - -/* Watchdog */ -static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) -{ - /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ - return sprintf(buf, "%u\n", data->wdog_control & 0xb0); -} - -static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - down(&data->update_lock); - data->wdog_control &= ~0xf0; - data->wdog_control |= v; - fscpos_write_value(client, reg, data->wdog_control); - up(&data->update_lock); - return count; -} - -static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->wdog_state & 0x02); -} - -static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - /* Valid values: 2 (clear) */ - if (v != 2) { - dev_err(&client->dev, "wdog_state value %ld not supported. " - "Must be 2 to clear the state!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - data->wdog_state &= ~v; - fscpos_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) -{ - return sprintf(buf, "%u\n", data->wdog_preset); -} - -static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - down(&data->update_lock); - data->wdog_preset = v; - fscpos_write_value(client, reg, data->wdog_preset); - up(&data->update_lock); - return count; -} - -/* Event */ -static ssize_t show_event(struct device *dev, char *buf) -{ - /* bits 5..7 reserved => mask with 0x1f */ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - -/* - * Sysfs stuff - */ -#define create_getter(kind, sub) \ - static ssize_t sysfs_show_##kind##sub(struct device *dev, char *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf); \ - } - -#define create_getter_n(kind, offset, sub) \ - static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, char\ - *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf, offset); \ - } - -#define create_setter(kind, sub, reg) \ - static ssize_t sysfs_set_##kind##sub (struct device *dev, const char \ - *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, reg); \ - } - -#define create_setter_n(kind, offset, sub, reg) \ - static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, \ - const char *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, offset, reg);\ - } - -#define create_sysfs_device_ro(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ - sysfs_show_##kind##offset##sub, NULL); - -#define create_sysfs_device_rw(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ - sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); - -#define sysfs_ro_n(kind, sub, offset) \ - create_getter_n(kind, offset, sub); \ - create_sysfs_device_ro(kind, sub, offset); - -#define sysfs_rw_n(kind, sub, offset, reg) \ - create_getter_n(kind, offset, sub); \ - create_setter_n(kind, offset, sub, reg); \ - create_sysfs_device_rw(kind, sub, offset); - -#define sysfs_rw(kind, sub, reg) \ - create_getter(kind, sub); \ - create_setter(kind, sub, reg); \ - create_sysfs_device_rw(kind, sub,); - -#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ - sysfs_fan(offset, reg_status, reg_ripple); \ - sysfs_rw_n(pwm,, offset, reg_min); - -#define sysfs_fan(offset, reg_status, reg_ripple) \ - sysfs_ro_n(fan, _input, offset); \ - sysfs_ro_n(fan, _status, offset); \ - sysfs_rw_n(fan, _ripple, offset, reg_ripple); - -#define sysfs_temp(offset, reg_status) \ - sysfs_ro_n(temp, _input, offset); \ - sysfs_ro_n(temp, _status, offset); \ - sysfs_rw_n(temp, _reset, offset, reg_status); - -#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ - sysfs_rw(wdog, _control, reg_wdog_control); \ - sysfs_rw(wdog, _preset, reg_wdog_preset); \ - sysfs_rw(wdog, _state, reg_wdog_state); - -sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], - FSCPOS_REG_PWM[0]); -sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], - FSCPOS_REG_PWM[1]); -sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); - -sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); -sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); -sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); - -sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, - FSCPOS_REG_WDOG_CONTROL); - -static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); -static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); - -static int fscpos_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, fscpos_detect); -} - -int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct fscpos_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* - * OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access fscpos_{read,write}_value. - */ - - if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct fscpos_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscpos_driver; - new_client->flags = 0; - - /* Do the remaining detection unless force or force_fscpos parameter */ - if (kind < 0) { - if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) - != 0x50) /* 'P' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) - != 0x45) /* 'E' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) - != 0x47))/* 'G' */ - { - dev_dbg(&new_client->dev, "fscpos detection failed\n"); - goto exit_free; - } - } - - /* Fill in the remaining client fields and put it in the global list */ - strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Inizialize the fscpos chip */ - fscpos_init_client(new_client); - - /* Announce that the chip was found */ - dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_event); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_wdog_control); - device_create_file(&new_client->dev, &dev_attr_wdog_preset); - device_create_file(&new_client->dev, &dev_attr_wdog_state); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_status); - device_create_file(&new_client->dev, &dev_attr_temp1_reset); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_status); - device_create_file(&new_client->dev, &dev_attr_temp2_reset); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_status); - device_create_file(&new_client->dev, &dev_attr_temp3_reset); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_status); - device_create_file(&new_client->dev, &dev_attr_fan1_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_status); - device_create_file(&new_client->dev, &dev_attr_fan2_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan3_status); - device_create_file(&new_client->dev, &dev_attr_fan3_ripple); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int fscpos_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client" - " not detached.\n"); - return err; - } - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int fscpos_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSCPOS chip */ -static void fscpos_init_client(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - /* read revision from chip */ - data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); -} - -static struct fscpos_data *fscpos_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscpos_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if ((jiffies - data->last_updated > 2 * HZ) || - (jiffies < data->last_updated) || !data->valid) { - int i; - - dev_dbg(&client->dev, "Starting fscpos update\n"); - - for (i = 0; i < 3; i++) { - data->temp_act[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_ACT[i]); - data->temp_status[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_STATE[i]); - data->fan_act[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_ACT[i]); - data->fan_status[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_STATE[i]); - data->fan_ripple[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_RIPPLE[i]); - if (i < 2) { - /* fan2_min is not supported by the chip */ - data->pwm[i] = fscpos_read_value(client, - FSCPOS_REG_PWM[i]); - } - /* reset fan status if speed is back to > 0 */ - if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { - reset_fan_alarm(client, i); - } - } - - data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); - data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); - data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); - - data->wdog_preset = fscpos_read_value(client, - FSCPOS_REG_WDOG_PRESET); - data->wdog_state = fscpos_read_value(client, - FSCPOS_REG_WDOG_STATE); - data->wdog_control = fscpos_read_value(client, - FSCPOS_REG_WDOG_CONTROL); - - data->global_event = fscpos_read_value(client, - FSCPOS_REG_EVENT_STATE); - - data->last_updated = jiffies; - data->valid = 1; - } - up(&data->update_lock); - return data; -} - -static int __init sm_fscpos_init(void) -{ - return i2c_add_driver(&fscpos_driver); -} - -static void __exit sm_fscpos_exit(void) -{ - i2c_del_driver(&fscpos_driver); -} - -MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " - "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" - " and Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_fscpos_init); -module_exit(sm_fscpos_exit); |