1 files changed, 8 insertions, 110 deletions

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 1a7410f..cae6937 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -239,7 +239,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
 
 static void cdrom_end_request(ide_drive_t *drive, int uptodate)
 {
-	struct request *rq = HWGROUP(drive)->rq;
+	struct request *rq = drive->hwif->rq;
 	int nsectors = rq->hard_cur_sectors;
 
 	ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
@@ -306,8 +306,7 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
 static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	ide_hwgroup_t *hwgroup = hwif->hwgroup;
-	struct request *rq = hwgroup->rq;
+	struct request *rq = hwif->rq;
 	int stat, err, sense_key;
 
 	/* check for errors */
@@ -502,7 +501,7 @@ end_request:
 		blkdev_dequeue_request(rq);
 		spin_unlock_irqrestore(q->queue_lock, flags);
 
-		hwgroup->rq = NULL;
+		hwif->rq = NULL;
 
 		cdrom_queue_request_sense(drive, rq->sense, rq);
 	} else
@@ -511,106 +510,6 @@ end_request:
 	return 1;
 }
 
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
-/*
- * Set up the device registers for transferring a packet command on DEV,
- * expecting to later transfer XFERLEN bytes.  HANDLER is the routine
- * which actually transfers the command to the drive.  If this is a
- * drq_interrupt device, this routine will arrange for HANDLER to be
- * called when the interrupt from the drive arrives.  Otherwise, HANDLER
- * will be called immediately after the drive is prepared for the transfer.
- */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->hwgroup->rq;
-	int xferlen;
-
-	xferlen = ide_cd_get_xferlen(rq);
-
-	ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
-
-	/* FIXME: for Virtual DMA we must check harder */
-	if (drive->dma)
-		drive->dma = !hwif->dma_ops->dma_setup(drive);
-
-	/* set up the controller registers */
-	ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
-			   xferlen, drive->dma);
-
-	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-		/* waiting for CDB interrupt, not DMA yet. */
-		if (drive->dma)
-			drive->waiting_for_dma = 0;
-
-		/* packet command */
-		ide_execute_command(drive, ATA_CMD_PACKET,
-				    cdrom_transfer_packet_command,
-				    ATAPI_WAIT_PC, ide_cd_expiry);
-		return ide_started;
-	} else {
-		ide_execute_pkt_cmd(drive);
-
-		return cdrom_transfer_packet_command(drive);
-	}
-}
-
-/*
- * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
- * registers must have already been prepared by cdrom_start_packet_command.
- * HANDLER is the interrupt handler to call when the command completes or
- * there's data ready.
- */
-#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->hwgroup->rq;
-	int cmd_len;
-	ide_startstop_t startstop;
-
-	ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
-
-	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
-		/*
-		 * Here we should have been called after receiving an interrupt
-		 * from the device.  DRQ should how be set.
-		 */
-
-		/* check for errors */
-		if (cdrom_decode_status(drive, ATA_DRQ, NULL))
-			return ide_stopped;
-
-		/* ok, next interrupt will be DMA interrupt */
-		if (drive->dma)
-			drive->waiting_for_dma = 1;
-	} else {
-		/* otherwise, we must wait for DRQ to get set */
-		if (ide_wait_stat(&startstop, drive, ATA_DRQ,
-				  ATA_BUSY, WAIT_READY))
-			return startstop;
-	}
-
-	/* arm the interrupt handler */
-	ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
-
-	/* ATAPI commands get padded out to 12 bytes minimum */
-	cmd_len = COMMAND_SIZE(rq->cmd[0]);
-	if (cmd_len < ATAPI_MIN_CDB_BYTES)
-		cmd_len = ATAPI_MIN_CDB_BYTES;
-
-	/* send the command to the device */
-	hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
-
-	/* start the DMA if need be */
-	if (drive->dma)
-		hwif->dma_ops->dma_start(drive);
-
-	return ide_started;
-}
-
 /*
  * Check the contents of the interrupt reason register from the cdrom
  * and attempt to recover if there are problems.  Returns  0 if everything's
@@ -854,8 +753,7 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)
 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	ide_hwgroup_t *hwgroup = hwif->hwgroup;
-	struct request *rq = hwgroup->rq;
+	struct request *rq = hwif->rq;
 	xfer_func_t *xferfunc;
 	ide_expiry_t *expiry = NULL;
 	int dma_error = 0, dma, stat, thislen, uptodate = 0;
@@ -1061,7 +959,7 @@ end_request:
 		if (blk_end_request(rq, 0, dlen))
 			BUG();
 
-		hwgroup->rq = NULL;
+		hwif->rq = NULL;
 	} else {
 		if (!uptodate)
 			rq->cmd_flags |= REQ_FAILED;
@@ -1183,7 +1081,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		return ide_stopped;
 	}
 
-	return cdrom_start_packet_command(drive);
+	return ide_issue_pc(drive);
 }
 
 /*
@@ -1916,7 +1814,7 @@ static void ide_cd_release(struct kref *kref)
 
 static int ide_cd_probe(ide_drive_t *);
 
-static ide_driver_t ide_cdrom_driver = {
+static struct ide_driver ide_cdrom_driver = {
 	.gen_driver = {
 		.owner		= THIS_MODULE,
 		.name		= "ide-cdrom",
@@ -1927,7 +1825,6 @@ static ide_driver_t ide_cdrom_driver = {
 	.version		= IDECD_VERSION,
 	.do_request		= ide_cd_do_request,
 	.end_request		= ide_end_request,
-	.error			= __ide_error,
 #ifdef CONFIG_IDE_PROC_FS
 	.proc_entries		= ide_cd_proc_entries,
 	.proc_devsets		= ide_cd_proc_devsets,
@@ -2082,6 +1979,7 @@ static int ide_cd_probe(ide_drive_t *drive)
 	}
 
 	drive->debug_mask = debug_mask;
+	drive->irq_handler = cdrom_newpc_intr;
 
 	info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
 	if (info == NULL) {