diff options
Diffstat (limited to 'drivers/ide/pci/via82cxxx.c')
| -rw-r--r-- | drivers/ide/pci/via82cxxx.c | 108 |
1 files changed, 30 insertions, 78 deletions
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a7be779..c8022a9 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -1,6 +1,6 @@ /* * - * Version 3.47 + * Version 3.49 * * VIA IDE driver for Linux. Supported southbridges: * @@ -153,21 +153,17 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) * @drive: Drive to set up * @speed: desired speed * - * via_set_drive() computes timing values configures the drive and - * the chipset to a desired transfer mode. It also can be called - * by upper layers. + * via_set_drive() computes timing values configures the chipset to + * a desired transfer mode. It also can be called by upper layers. */ -static int via_set_drive(ide_drive_t *drive, u8 speed) +static void via_set_drive(ide_drive_t *drive, const u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev); struct ide_timing t, p; unsigned int T, UT; - if (speed != XFER_PIO_SLOW) - ide_config_drive_speed(drive, speed); - T = 1000000000 / via_clock; switch (vdev->via_config->udma_mask) { @@ -186,53 +182,19 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) } via_set_speed(HWIF(drive), drive->dn, &t); - - if (!drive->init_speed) - drive->init_speed = speed; - drive->current_speed = speed; - - return 0; } /** - * via82cxxx_tune_drive - PIO setup - * @drive: drive to set up - * @pio: mode to use (255 for 'best possible') + * via_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number * * A callback from the upper layers for PIO-only tuning. */ -static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) -{ - if (pio == 255) - pio = ide_get_best_pio_mode(drive, 255, 5); - - via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5)); -} - -/** - * via82cxxx_ide_dma_check - set up for DMA if possible - * @drive: IDE drive to set up - * - * Set up the drive for the highest supported speed considering the - * driver, controller and cable - */ - -static int via82cxxx_ide_dma_check (ide_drive_t *drive) +static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) { - u8 speed = ide_max_dma_mode(drive); - - if (speed == 0) { - via82cxxx_tune_drive(drive, 255); - return -1; - } - - via_set_drive(drive, speed); - - if (drive->autodma) - return 0; - - return -1; + via_set_drive(drive, XFER_PIO_0 + pio); } static struct via_isa_bridge *via_config_find(struct pci_dev **isa) @@ -419,7 +381,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Cable special cases */ -static struct dmi_system_id cable_dmi_table[] = { +static const struct dmi_system_id cable_dmi_table[] = { { .ident = "Acer Ferrari 3400", .matches = { @@ -463,11 +425,8 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); int i; - hwif->autodma = 0; - - hwif->tuneproc = &via82cxxx_tune_drive; - hwif->speedproc = &via_set_drive; - + hwif->set_pio_mode = &via_set_pio_mode; + hwif->set_dma_mode = &via_set_drive; #ifdef CONFIG_PPC_CHRP if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) { @@ -478,27 +437,15 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) for (i = 0; i < 2; i++) { hwif->drives[i].io_32bit = 1; hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1; - hwif->drives[i].autotune = 1; - hwif->drives[i].dn = hwif->channel * 2 + i; } if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - hwif->ultra_mask = vdev->via_config->udma_mask; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; if (hwif->cbl != ATA_CBL_PATA40_SHORT) hwif->cbl = via82cxxx_cable_detect(hwif); - - hwif->ide_dma_check = &via82cxxx_ide_dma_check; - if (!noautodma) - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; } static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { @@ -506,22 +453,27 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { .name = "VP_IDE", .init_chipset = init_chipset_via82cxxx, .init_hwif = init_hwif_via82cxxx, - .autodma = NOAUTODMA, .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, - .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST - | IDE_HFLAG_PIO_NO_DOWNGRADE, + .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | + IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_AUTODMA | + IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO5, + .swdma_mask = ATA_SWDMA2, + .mwdma_mask = ATA_MWDMA2, },{ /* 1 */ .name = "VP_IDE", .init_chipset = init_chipset_via82cxxx, .init_hwif = init_hwif_via82cxxx, - .autodma = AUTODMA, .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, - .bootable = ON_BOARD, - .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST - | IDE_HFLAG_PIO_NO_DOWNGRADE, + .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | + IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO5, + .swdma_mask = ATA_SWDMA2, + .mwdma_mask = ATA_MWDMA2, } }; @@ -541,11 +493,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); } -static struct pci_device_id via_pci_tbl[] = { - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, +static const struct pci_device_id via_pci_tbl[] = { + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, via_pci_tbl); |