aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/irda
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/ali-ircc.c6
-rw-r--r--drivers/net/irda/bfin_sir.c59
-rw-r--r--drivers/net/irda/bfin_sir.h63
-rw-r--r--drivers/net/irda/donauboe.c2
-rw-r--r--drivers/net/irda/donauboe.h2
-rw-r--r--drivers/net/irda/girbil-sir.c2
-rw-r--r--drivers/net/irda/irda-usb.c4
-rw-r--r--drivers/net/irda/mcs7780.c6
-rw-r--r--drivers/net/irda/nsc-ircc.c2
-rw-r--r--drivers/net/irda/nsc-ircc.h2
-rw-r--r--drivers/net/irda/pxaficp_ir.c4
-rw-r--r--drivers/net/irda/smsc-ircc2.c46
-rw-r--r--drivers/net/irda/via-ircc.c4
-rw-r--r--drivers/net/irda/vlsi_ir.h4
14 files changed, 75 insertions, 131 deletions
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 92631eb..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -76,7 +76,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
-/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+/* These are the currently known ALi south-bridge chipsets, the only one difference
* is that M1543C doesn't support HP HDSL-3600
*/
static ali_chip_t chips[] =
@@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
@@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+ IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index f940dfa..9d4ce1a 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -67,27 +67,27 @@ static void bfin_sir_stop_tx(struct bfin_sir_port *port)
disable_dma(port->tx_dma_channel);
#endif
- while (!(SIR_UART_GET_LSR(port) & THRE)) {
+ while (!(UART_GET_LSR(port) & THRE)) {
cpu_relax();
continue;
}
- SIR_UART_STOP_TX(port);
+ UART_CLEAR_IER(port, ETBEI);
}
static void bfin_sir_enable_tx(struct bfin_sir_port *port)
{
- SIR_UART_ENABLE_TX(port);
+ UART_SET_IER(port, ETBEI);
}
static void bfin_sir_stop_rx(struct bfin_sir_port *port)
{
- SIR_UART_STOP_RX(port);
+ UART_CLEAR_IER(port, ERBFI);
}
static void bfin_sir_enable_rx(struct bfin_sir_port *port)
{
- SIR_UART_ENABLE_RX(port);
+ UART_SET_IER(port, ERBFI);
}
static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
@@ -116,7 +116,7 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
do {
udelay(utime);
- lsr = SIR_UART_GET_LSR(port);
+ lsr = UART_GET_LSR(port);
} while (!(lsr & TEMT) && count--);
/* The useconds for 1 bits to transmit */
@@ -125,27 +125,27 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
/* Clear UCEN bit to reset the UART state machine
* and control registers
*/
- val = SIR_UART_GET_GCTL(port);
+ val = UART_GET_GCTL(port);
val &= ~UCEN;
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
/* Set DLAB in LCR to Access THR RBR IER */
- SIR_UART_SET_DLAB(port);
+ UART_SET_DLAB(port);
SSYNC();
- SIR_UART_PUT_DLL(port, quot & 0xFF);
- SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
+ UART_PUT_DLL(port, quot & 0xFF);
+ UART_PUT_DLH(port, (quot >> 8) & 0xFF);
SSYNC();
/* Clear DLAB in LCR */
- SIR_UART_CLEAR_DLAB(port);
+ UART_CLEAR_DLAB(port);
SSYNC();
- SIR_UART_PUT_LCR(port, lcr);
+ UART_PUT_LCR(port, lcr);
- val = SIR_UART_GET_GCTL(port);
+ val = UART_GET_GCTL(port);
val |= UCEN;
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
ret = 0;
break;
@@ -154,12 +154,12 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
break;
}
- val = SIR_UART_GET_GCTL(port);
+ val = UART_GET_GCTL(port);
/* If not add the 'RPOLC', we can't catch the receive interrupt.
* It's related with the HW layout and the IR transiver.
*/
val |= IREN | RPOLC;
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
return ret;
}
@@ -168,7 +168,7 @@ static int bfin_sir_is_receiving(struct net_device *dev)
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
- if (!(SIR_UART_GET_IER(port) & ERBFI))
+ if (!(UART_GET_IER(port) & ERBFI))
return 0;
return self->rx_buff.state != OUTSIDE_FRAME;
}
@@ -182,7 +182,7 @@ static void bfin_sir_tx_chars(struct net_device *dev)
if (self->tx_buff.len != 0) {
chr = *(self->tx_buff.data);
- SIR_UART_PUT_CHAR(port, chr);
+ UART_PUT_CHAR(port, chr);
self->tx_buff.data++;
self->tx_buff.len--;
} else {
@@ -206,8 +206,8 @@ static void bfin_sir_rx_chars(struct net_device *dev)
struct bfin_sir_port *port = self->sir_port;
unsigned char ch;
- SIR_UART_CLEAR_LSR(port);
- ch = SIR_UART_GET_CHAR(port);
+ UART_CLEAR_LSR(port);
+ ch = UART_GET_CHAR(port);
async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
dev->last_rx = jiffies;
}
@@ -219,7 +219,7 @@ static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
- while ((SIR_UART_GET_LSR(port) & DR))
+ while ((UART_GET_LSR(port) & DR))
bfin_sir_rx_chars(dev);
spin_unlock(&self->lock);
@@ -233,7 +233,7 @@ static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
- if (SIR_UART_GET_LSR(port) & THRE)
+ if (UART_GET_LSR(port) & THRE)
bfin_sir_tx_chars(dev);
spin_unlock(&self->lock);
@@ -312,7 +312,7 @@ static void bfin_sir_dma_rx_chars(struct net_device *dev)
struct bfin_sir_port *port = self->sir_port;
int i;
- SIR_UART_CLEAR_LSR(port);
+ UART_CLEAR_LSR(port);
for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
@@ -430,11 +430,10 @@ static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev
unsigned short val;
bfin_sir_stop_rx(port);
- SIR_UART_DISABLE_INTS(port);
- val = SIR_UART_GET_GCTL(port);
+ val = UART_GET_GCTL(port);
val &= ~(UCEN | IREN | RPOLC);
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
@@ -518,12 +517,12 @@ static void bfin_sir_send_work(struct work_struct *work)
* sending data. We also can set the speed, which will
* reset all the UART.
*/
- val = SIR_UART_GET_GCTL(port);
+ val = UART_GET_GCTL(port);
val &= ~(IREN | RPOLC);
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
SSYNC();
val |= IREN | RPOLC;
- SIR_UART_PUT_GCTL(port, val);
+ UART_PUT_GCTL(port, val);
SSYNC();
/* bfin_sir_set_speed(port, self->speed); */
diff --git a/drivers/net/irda/bfin_sir.h b/drivers/net/irda/bfin_sir.h
index e3b285a..29cbde8 100644
--- a/drivers/net/irda/bfin_sir.h
+++ b/drivers/net/irda/bfin_sir.h
@@ -26,7 +26,6 @@
#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/portmux.h>
-#include <mach/bfin_serial_5xx.h>
#undef DRIVER_NAME
#ifdef CONFIG_SIR_BFIN_DMA
@@ -83,64 +82,10 @@ struct bfin_sir_self {
#define DRIVER_NAME "bfin_sir"
-#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_BF54x
-#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR)
-#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET)
-#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v)
-#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
-#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v)
-#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1)
-
-#define SIR_UART_SET_DLAB(port)
-#define SIR_UART_CLEAR_DLAB(port)
-
-#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
-#define SIR_UART_DISABLE_INTS(port) SIR_UART_CLEAR_IER(port, 0xF)
-#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
-#define SIR_UART_ENABLE_TX(port) do { SIR_UART_SET_IER(port, ETBEI); } while (0)
-#define SIR_UART_STOP_RX(port) do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
-#define SIR_UART_ENABLE_RX(port) do { SIR_UART_SET_IER(port, ERBFI); } while (0)
-#else
-
-#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
-
-#define SIR_UART_SET_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
-#define SIR_UART_CLEAR_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
-
-#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
-#define SIR_UART_DISABLE_INTS(port) SIR_UART_PUT_IER(port, 0)
-#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
-#define SIR_UART_ENABLE_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
-#define SIR_UART_STOP_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
-#define SIR_UART_ENABLE_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
- unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
- port->lsr |= (lsr & (BI|FE|PE|OE));
- return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
- port->lsr = 0;
- bfin_read16(port->membase + OFFSET_LSR);
-}
-#endif
+#define port_membase(port) (((struct bfin_sir_port *)(port))->membase)
+#define get_lsr_cache(port) (((struct bfin_sir_port *)(port))->lsr)
+#define put_lsr_cache(port, v) (((struct bfin_sir_port *)(port))->lsr = (v))
+#include <asm/bfin_serial.h>
static const unsigned short per[][4] = {
/* rx pin tx pin NULL uart_number */
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944..174cafa 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
/* do_probe module parameter Enable this code */
/* Probe code is very useful for understanding how the hardware works */
/* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
/* and send me <james@fishsoup.dhs.org> the output of dmesg */
#define USE_PROBE 1
#undef USE_PROBE
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 77fcf44..d92d54e 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -51,7 +51,7 @@
/* The documentation for this chip is allegedly released */
/* However I have not seen it, not have I managed to contact */
-/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* anyone who has. HOWEVER the chip bears a striking resemblance */
/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
/* the documentation for this is freely available at */
/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index a31b8fa..96cdecf 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
/* Control register 1 */
#define GIRBIL_TXEN 0x01 /* Enable transmitter */
#define GIRBIL_RXEN 0x02 /* Enable receiver */
-#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
+#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */
#define GIRBIL_ECHO 0x08 /* Echo control characters */
/* LED Current Register (0x2) */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e4ea619..d9267cb 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb)
/* urb is now available */
//urb->status = 0; -> tested above
- /* New speed and xbof is now commited in hardware */
+ /* New speed and xbof is now committed in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb)
IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
irda_usb_change_speed_xbofs(self);
} else {
- /* New speed and xbof is now commited in hardware */
+ /* New speed and xbof is now committed in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
/* Done, waiting for next packet */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de..be52bfe 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
mcs_get_reg(mcs, MCS_MODE_REG, &rval);
- /* MINRXPW values recomended by MosChip */
+ /* MINRXPW values recommended by MosChip */
if (mcs->new_speed <= 115200) {
rval &= ~MCS_FIR;
@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb)
ret = usb_submit_urb(urb, GFP_ATOMIC);
}
-/* Transmit callback funtion. */
+/* Transmit callback function. */
static void mcs_send_irq(struct urb *urb)
{
struct mcs_cb *mcs = urb->context;
@@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb)
netif_wake_queue(ndev);
}
-/* Transmit callback funtion. */
+/* Transmit callback function. */
static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
struct net_device *ndev)
{
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 559fe85..7a963d4 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
int reg, com = 0;
int pnp;
- /* Read funtion enable register (FER) */
+ /* Read function enable register (FER) */
outb(CFG_338_FER, cfg_base);
reg = inb(cfg_base+1);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 7ba7738..32fa582 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -135,7 +135,7 @@
#define LSR_TXRDY 0x20 /* Transmitter ready */
#define LSR_TXEMP 0x40 /* Transmitter empty */
-#define ASCR 0x07 /* Auxillary Status and Control Register */
+#define ASCR 0x07 /* Auxiliary Status and Control Register */
#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */
#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */
#define ASCR_S_EOT 0x04 /* Set end of transmission */
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31..001ed0a 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@
#define ICCR0_AME (1 << 7) /* Address match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
#define ICCR0_TXE (1 << 3) /* Transmit enable */
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
}
if (icsr0 & ICSR0_EIF) {
- /* An error in FIFO occured, or there is a end of frame */
+ /* An error in FIFO occurred, or there is a end of frame */
pxa_irda_fir_irq_eif(si, dev, icsr0);
}
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1c1677c..69b5707 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -222,19 +222,19 @@ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 s
static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
/* Probing */
-static int __init smsc_ircc_look_for_chips(void);
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
-static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_fdc(unsigned short cfg_base);
-static int __init smsc_superio_lpc(unsigned short cfg_base);
+static int smsc_ircc_look_for_chips(void);
+static const struct smsc_chip * smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
+static int smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_fdc(unsigned short cfg_base);
+static int smsc_superio_lpc(unsigned short cfg_base);
#ifdef CONFIG_PCI
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
-static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static int preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
+static int preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void preconfigure_ali_port(struct pci_dev *dev,
unsigned short port);
-static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static int smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
unsigned char ircc_dma,
@@ -366,7 +366,7 @@ static inline void register_bank(int iobase, int bank)
}
/* PNP hotplug support */
-static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+static const struct pnp_device_id smsc_ircc_pnp_table[] __devinitconst = {
{ .id = "SMCf010", .driver_data = 0 },
/* and presumably others */
{ }
@@ -515,7 +515,7 @@ static const struct net_device_ops smsc_ircc_netdev_ops = {
* Try to open driver instance
*
*/
-static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
+static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
{
struct smsc_ircc_cb *self;
struct net_device *dev;
@@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
int iobase;
int iir, lsr;
- /* Already locked comming here in smsc_ircc_interrupt() */
+ /* Already locked coming here in smsc_ircc_interrupt() */
/*spin_lock(&self->lock);*/
iobase = self->io.sir_base;
@@ -2273,7 +2273,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
}
-static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
+static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg)
{
IRDA_DEBUG(1, "%s\n", __func__);
@@ -2281,7 +2281,7 @@ static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
return inb(cfg_base) != reg ? -1 : 0;
}
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
+static const struct smsc_chip * __devinit smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
{
u8 devid, xdevid, rev;
@@ -2406,7 +2406,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
#define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
+static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitconst = {
/*
* Subsystems needing entries:
* 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
@@ -2532,7 +2532,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
* (FIR port, SIR port, FIR DMA, FIR IRQ)
* through the chip configuration port.
*/
-static int __init preconfigure_smsc_chip(struct
+static int __devinit preconfigure_smsc_chip(struct
smsc_ircc_subsystem_configuration
*conf)
{
@@ -2633,7 +2633,7 @@ static int __init preconfigure_smsc_chip(struct
* or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
* They all work the same way!
*/
-static int __init preconfigure_through_82801(struct pci_dev *dev,
+static int __devinit preconfigure_through_82801(struct pci_dev *dev,
struct
smsc_ircc_subsystem_configuration
*conf)
@@ -2786,7 +2786,7 @@ static int __init preconfigure_through_82801(struct pci_dev *dev,
* This is based on reverse-engineering since ALi does not
* provide any data sheet for the 1533 chip.
*/
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static void __devinit preconfigure_ali_port(struct pci_dev *dev,
unsigned short port)
{
unsigned char reg;
@@ -2824,7 +2824,7 @@ static void __init preconfigure_ali_port(struct pci_dev *dev,
IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
}
-static int __init preconfigure_through_ali(struct pci_dev *dev,
+static int __devinit preconfigure_through_ali(struct pci_dev *dev,
struct
smsc_ircc_subsystem_configuration
*conf)
@@ -2837,7 +2837,7 @@ static int __init preconfigure_through_ali(struct pci_dev *dev,
return preconfigure_smsc_chip(conf);
}
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
unsigned short ircc_sir,
unsigned char ircc_dma,
@@ -2849,7 +2849,7 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
int ret = 0;
for_each_pci_dev(dev) {
- struct smsc_ircc_subsystem_configuration *conf;
+ const struct smsc_ircc_subsystem_configuration *conf;
/*
* Cache the subsystem vendor/device:
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 186cd28..f504b26 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.
2004-02-16: <sda@bdit.de>
- Removed unneeded 'legacy' pci stuff.
-- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff.
- On speed change from core, don't send SIR frame with new speed.
Use current speed and change speeds later.
- Make module-param dongle_id actually work.
@@ -334,7 +334,7 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
self->io.dongle_id = dongle_id;
/* The only value we must override it the baudrate */
- /* Maximum speeds and capabilities are dongle-dependant. */
+ /* Maximum speeds and capabilities are dongle-dependent. */
switch( self->io.dongle_id ){
case 0x0d:
self->qos.baud_rate.bits =
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index d66fab8..a076eb1 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -209,7 +209,7 @@ enum vlsi_pio_irintr {
IRINTR_ACTEN = 0x80, /* activity interrupt enable */
IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */
IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/
- IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */
+ IRINTR_RPKTINT = 0x10, /* rx-packet transferred from fifo to memory finished */
IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */
IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */
IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */
@@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev {
/* the remapped error flags we use for returning from frame
* post-processing in vlsi_process_tx/rx() after it was completed
* by the hardware. These functions either return the >=0 number
- * of transfered bytes in case of success or the negative (-)
+ * of transferred bytes in case of success or the negative (-)
* of the or'ed error flags.
*/
generated by cgit v1.1 at 2025-08-17 20:37:03 +0000