aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig8
-rw-r--r--drivers/net/bfin_mac.c145
-rw-r--r--drivers/net/bfin_mac.h2
-rw-r--r--drivers/net/mlx4/en_main.c15
-rw-r--r--drivers/net/mlx4/en_netdev.c10
-rw-r--r--drivers/net/mlx4/en_port.c4
-rw-r--r--drivers/net/mlx4/en_port.h3
-rw-r--r--drivers/net/mlx4/fw.c3
-rw-r--r--drivers/net/mlx4/intf.c21
-rw-r--r--drivers/net/mlx4/main.c4
-rw-r--r--drivers/net/mlx4/mlx4_en.h1
-rw-r--r--drivers/net/mlx4/port.c19
-rw-r--r--drivers/net/xilinx_emaclite.c8
13 files changed, 171 insertions, 72 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 702f598..86fe67f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -883,14 +883,6 @@ config BFIN_RX_DESC_NUM
help
Set the number of buffer packets used in driver.
-config BFIN_MAC_RMII
- bool "RMII PHY Interface"
- depends on BFIN_MAC
- default y if BFIN527_EZKIT
- default n if BFIN537_STAMP
- help
- Use Reduced PHY MII Interface
-
config BFIN_MAC_USE_HWSTAMP
bool "Use IEEE 1588 hwstamp"
depends on BFIN_MAC && BF518
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index f723319..ce1e5e9 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip MAC Driver
*
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/mii.h>
-#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
@@ -76,12 +75,6 @@ static struct net_dma_desc_tx *current_tx_ptr;
static struct net_dma_desc_tx *tx_desc;
static struct net_dma_desc_rx *rx_desc;
-#if defined(CONFIG_BFIN_MAC_RMII)
-static u16 pin_req[] = P_RMII0;
-#else
-static u16 pin_req[] = P_MII0;
-#endif
-
static void desc_list_free(void)
{
struct net_dma_desc_rx *r;
@@ -347,23 +340,23 @@ static void bfin_mac_adjust_link(struct net_device *dev)
}
if (phydev->speed != lp->old_speed) {
-#if defined(CONFIG_BFIN_MAC_RMII)
- u32 opmode = bfin_read_EMAC_OPMODE();
- switch (phydev->speed) {
- case 10:
- opmode |= RMII_10;
- break;
- case 100:
- opmode &= ~(RMII_10);
- break;
- default:
- printk(KERN_WARNING
- "%s: Ack! Speed (%d) is not 10/100!\n",
- DRV_NAME, phydev->speed);
- break;
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ u32 opmode = bfin_read_EMAC_OPMODE();
+ switch (phydev->speed) {
+ case 10:
+ opmode |= RMII_10;
+ break;
+ case 100:
+ opmode &= ~RMII_10;
+ break;
+ default:
+ printk(KERN_WARNING
+ "%s: Ack! Speed (%d) is not 10/100!\n",
+ DRV_NAME, phydev->speed);
+ break;
+ }
+ bfin_write_EMAC_OPMODE(opmode);
}
- bfin_write_EMAC_OPMODE(opmode);
-#endif
new_state = 1;
lp->old_speed = phydev->speed;
@@ -392,7 +385,7 @@ static void bfin_mac_adjust_link(struct net_device *dev)
/* MDC = 2.5 MHz */
#define MDC_CLK 2500000
-static int mii_probe(struct net_device *dev)
+static int mii_probe(struct net_device *dev, int phy_mode)
{
struct bfin_mac_local *lp = netdev_priv(dev);
struct phy_device *phydev = NULL;
@@ -411,8 +404,8 @@ static int mii_probe(struct net_device *dev)
sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
bfin_write_EMAC_SYSCTL(sysctl);
- /* search for connect PHY device */
- for (i = 0; i < PHY_MAX_ADDR; i++) {
+ /* search for connected PHY device */
+ for (i = 0; i < PHY_MAX_ADDR; ++i) {
struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
if (!tmp_phydev)
@@ -429,13 +422,14 @@ static int mii_probe(struct net_device *dev)
return -ENODEV;
}
-#if defined(CONFIG_BFIN_MAC_RMII)
- phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
- 0, PHY_INTERFACE_MODE_RMII);
-#else
+ if (phy_mode != PHY_INTERFACE_MODE_RMII &&
+ phy_mode != PHY_INTERFACE_MODE_MII) {
+ printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+ return -EINVAL;
+ }
+
phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
- 0, PHY_INTERFACE_MODE_MII);
-#endif
+ 0, phy_mode);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
@@ -570,6 +564,8 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
/**************************************************************************/
void setup_system_regs(struct net_device *dev)
{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ int i;
unsigned short sysctl;
/*
@@ -577,6 +573,15 @@ void setup_system_regs(struct net_device *dev)
* Configure checksum support and rcve frame word alignment
*/
sysctl = bfin_read_EMAC_SYSCTL();
+ /*
+ * check if interrupt is requested for any PHY,
+ * enable PHY interrupt only if needed
+ */
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ if (lp->mii_bus->irq[i] != PHY_POLL)
+ break;
+ if (i < PHY_MAX_ADDR)
+ sysctl |= PHYIE;
sysctl |= RXDWA;
#if defined(BFIN_MAC_CSUM_OFFLOAD)
sysctl |= RXCKS;
@@ -1203,7 +1208,7 @@ static void bfin_mac_disable(void)
/*
* Enable Interrupts, Receive, and Transmit
*/
-static int bfin_mac_enable(void)
+static int bfin_mac_enable(struct phy_device *phydev)
{
int ret;
u32 opmode;
@@ -1233,12 +1238,13 @@ static int bfin_mac_enable(void)
opmode |= DRO | DC | PSF;
opmode |= RE;
-#if defined(CONFIG_BFIN_MAC_RMII)
- opmode |= RMII; /* For Now only 100MBit are supported */
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ opmode |= RMII; /* For Now only 100MBit are supported */
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
- opmode |= TE;
-#endif
+ opmode |= TE;
#endif
+ }
+
/* Turn on the EMAC rx */
bfin_write_EMAC_OPMODE(opmode);
@@ -1270,7 +1276,7 @@ static void bfin_mac_timeout(struct net_device *dev)
if (netif_queue_stopped(lp->ndev))
netif_wake_queue(lp->ndev);
- bfin_mac_enable();
+ bfin_mac_enable(lp->phydev);
/* We can accept TX packets again */
dev->trans_start = jiffies; /* prevent tx timeout */
@@ -1342,11 +1348,19 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
switch (cmd) {
case SIOCSHWTSTAMP:
return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
default:
- return -EOPNOTSUPP;
+ if (lp->phydev)
+ return phy_mii_ioctl(lp->phydev, ifr, cmd);
+ else
+ return -EOPNOTSUPP;
}
}
@@ -1394,7 +1408,7 @@ static int bfin_mac_open(struct net_device *dev)
setup_mac_addr(dev->dev_addr);
bfin_mac_disable();
- ret = bfin_mac_enable();
+ ret = bfin_mac_enable(lp->phydev);
if (ret)
return ret;
pr_debug("hardware init finished\n");
@@ -1450,6 +1464,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
struct net_device *ndev;
struct bfin_mac_local *lp;
struct platform_device *pd;
+ struct bfin_mii_bus_platform_data *mii_bus_data;
int rc;
ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
@@ -1501,11 +1516,12 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
if (!lp->mii_bus) {
dev_err(&pdev->dev, "Cannot get mii_bus!\n");
rc = -ENODEV;
- goto out_err_mii_bus_probe;
+ goto out_err_probe_mac;
}
lp->mii_bus->priv = ndev;
+ mii_bus_data = pd->dev.platform_data;
- rc = mii_probe(ndev);
+ rc = mii_probe(ndev, mii_bus_data->phy_mode);
if (rc) {
dev_err(&pdev->dev, "MII Probe failed!\n");
goto out_err_mii_probe;
@@ -1552,8 +1568,6 @@ out_err_request_irq:
out_err_mii_probe:
mdiobus_unregister(lp->mii_bus);
mdiobus_free(lp->mii_bus);
-out_err_mii_bus_probe:
- peripheral_free_list(pin_req);
out_err_probe_mac:
platform_set_drvdata(pdev, NULL);
free_netdev(ndev);
@@ -1576,8 +1590,6 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
free_netdev(ndev);
- peripheral_free_list(pin_req);
-
return 0;
}
@@ -1623,12 +1635,21 @@ static int bfin_mac_resume(struct platform_device *pdev)
static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
{
struct mii_bus *miibus;
+ struct bfin_mii_bus_platform_data *mii_bus_pd;
+ const unsigned short *pin_req;
int rc, i;
+ mii_bus_pd = dev_get_platdata(&pdev->dev);
+ if (!mii_bus_pd) {
+ dev_err(&pdev->dev, "No peripherals in platform data!\n");
+ return -EINVAL;
+ }
+
/*
* We are setting up a network card,
* so set the GPIO pins to Ethernet mode
*/
+ pin_req = mii_bus_pd->mac_peripherals;
rc = peripheral_request_list(pin_req, DRV_NAME);
if (rc) {
dev_err(&pdev->dev, "Requesting peripherals failed!\n");
@@ -1645,13 +1666,30 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
miibus->parent = &pdev->dev;
miibus->name = "bfin_mii_bus";
+ miibus->phy_mask = mii_bus_pd->phy_mask;
+
snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
- if (miibus->irq == NULL)
- goto out_err_alloc;
- for (i = 0; i < PHY_MAX_ADDR; ++i)
+ if (!miibus->irq)
+ goto out_err_irq_alloc;
+
+ for (i = rc; i < PHY_MAX_ADDR; ++i)
miibus->irq[i] = PHY_POLL;
+ rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
+ if (rc != mii_bus_pd->phydev_number)
+ dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
+ mii_bus_pd->phydev_number);
+ for (i = 0; i < rc; ++i) {
+ unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
+ if (phyaddr < PHY_MAX_ADDR)
+ miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
+ else
+ dev_err(&pdev->dev,
+ "Invalid PHY address %i for phydev %i\n",
+ phyaddr, i);
+ }
+
rc = mdiobus_register(miibus);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
@@ -1663,6 +1701,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
out_err_mdiobus_register:
kfree(miibus->irq);
+out_err_irq_alloc:
mdiobus_free(miibus);
out_err_alloc:
peripheral_free_list(pin_req);
@@ -1673,11 +1712,15 @@ out_err_alloc:
static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
{
struct mii_bus *miibus = platform_get_drvdata(pdev);
+ struct bfin_mii_bus_platform_data *mii_bus_pd =
+ dev_get_platdata(&pdev->dev);
+
platform_set_drvdata(pdev, NULL);
mdiobus_unregister(miibus);
kfree(miibus->irq);
mdiobus_free(miibus);
- peripheral_free_list(pin_req);
+ peripheral_free_list(mii_bus_pd->mac_peripherals);
+
return 0;
}
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 04e4050..aed68be 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -14,6 +14,8 @@
#include <linux/clocksource.h>
#include <linux/timecompare.h>
#include <linux/timer.h>
+#include <linux/etherdevice.h>
+#include <linux/bfin_mac.h>
#define BFIN_MAC_CSUM_OFFLOAD
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 1439064..f6e0d40 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -124,6 +124,13 @@ static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
return 0;
}
+static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port)
+{
+ struct mlx4_en_dev *endev = ctx;
+
+ return endev->pndev[port];
+}
+
static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
enum mlx4_dev_event event, int port)
{
@@ -282,9 +289,11 @@ err_free_res:
}
static struct mlx4_interface mlx4_en_interface = {
- .add = mlx4_en_add,
- .remove = mlx4_en_remove,
- .event = mlx4_en_event,
+ .add = mlx4_en_add,
+ .remove = mlx4_en_remove,
+ .event = mlx4_en_event,
+ .get_dev = mlx4_en_get_netdev,
+ .protocol = MLX4_PROTOCOL_EN,
};
static int __init mlx4_en_init(void)
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 79478bd..6d6806b 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -69,6 +69,7 @@ static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int err;
+ int idx;
if (!priv->vlgrp)
return;
@@ -83,7 +84,10 @@ static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
if (err)
en_err(priv, "Failed configuring VLAN filter\n");
}
+ if (mlx4_register_vlan(mdev->dev, priv->port, vid, &idx))
+ en_err(priv, "failed adding vlan %d\n", vid);
mutex_unlock(&mdev->state_lock);
+
}
static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
@@ -91,6 +95,7 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int err;
+ int idx;
if (!priv->vlgrp)
return;
@@ -101,6 +106,11 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
/* Remove VID from port VLAN filter */
mutex_lock(&mdev->state_lock);
+ if (!mlx4_find_cached_vlan(mdev->dev, priv->port, vid, &idx))
+ mlx4_unregister_vlan(mdev->dev, priv->port, idx);
+ else
+ en_err(priv, "could not find vid %d in cache\n", vid);
+
if (mdev->device_up && priv->port_up) {
err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
if (err)
diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c
index aa3ef2a..7f5a322 100644
--- a/drivers/net/mlx4/en_port.c
+++ b/drivers/net/mlx4/en_port.c
@@ -127,8 +127,8 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
memset(context, 0, sizeof *context);
context->base_qpn = cpu_to_be32(base_qpn);
- context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT | base_qpn);
- context->mcast = cpu_to_be32(1 << SET_PORT_PROMISC_SHIFT | base_qpn);
+ context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_EN_SHIFT | base_qpn);
+ context->mcast = cpu_to_be32(1 << SET_PORT_PROMISC_MODE_SHIFT | base_qpn);
context->intra_no_vlan = 0;
context->no_vlan = MLX4_NO_VLAN_IDX;
context->intra_vlan_miss = 0;
diff --git a/drivers/net/mlx4/en_port.h b/drivers/net/mlx4/en_port.h
index f6511aa..092e814 100644
--- a/drivers/net/mlx4/en_port.h
+++ b/drivers/net/mlx4/en_port.h
@@ -36,7 +36,8 @@
#define SET_PORT_GEN_ALL_VALID 0x7
-#define SET_PORT_PROMISC_SHIFT 31
+#define SET_PORT_PROMISC_EN_SHIFT 31
+#define SET_PORT_PROMISC_MODE_SHIFT 30
enum {
MLX4_CMD_SET_VLAN_FLTR = 0x47,
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index b716e1a..b68eee2 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -98,7 +98,8 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u32 flags)
[20] = "Address vector port checking support",
[21] = "UD multicast support",
[24] = "Demand paging support",
- [25] = "Router support"
+ [25] = "Router support",
+ [30] = "IBoE support"
};
int i;
diff --git a/drivers/net/mlx4/intf.c b/drivers/net/mlx4/intf.c
index 5550678..73c94fc 100644
--- a/drivers/net/mlx4/intf.c
+++ b/drivers/net/mlx4/intf.c
@@ -161,3 +161,24 @@ void mlx4_unregister_device(struct mlx4_dev *dev)
mutex_unlock(&intf_mutex);
}
+
+void *mlx4_get_protocol_dev(struct mlx4_dev *dev, enum mlx4_protocol proto, int port)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ struct mlx4_device_context *dev_ctx;
+ unsigned long flags;
+ void *result = NULL;
+
+ spin_lock_irqsave(&priv->ctx_lock, flags);
+
+ list_for_each_entry(dev_ctx, &priv->ctx_list, list)
+ if (dev_ctx->intf->protocol == proto && dev_ctx->intf->get_dev) {
+ result = dev_ctx->intf->get_dev(dev, dev_ctx->context, port);
+ break;
+ }
+
+ spin_unlock_irqrestore(&priv->ctx_lock, flags);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mlx4_get_protocol_dev);
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 569fa3d..782f11d 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -103,7 +103,7 @@ MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
static int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG);
module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
-MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
+MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-7)");
int mlx4_check_port_params(struct mlx4_dev *dev,
enum mlx4_port_type *port_type)
@@ -1310,7 +1310,7 @@ static int __init mlx4_verify_params(void)
return -1;
}
- if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
+ if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 7)) {
pr_warning("mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
return -1;
}
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 1fc16ab..dfed6a0 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -475,6 +475,7 @@ struct mlx4_en_priv {
char *mc_addrs;
int mc_addrs_cnt;
struct mlx4_en_stat_out_mbox hw_stats;
+ int vids[128];
};
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
index 606aa58..56371ef 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/mlx4/port.c
@@ -182,6 +182,25 @@ static int mlx4_set_port_vlan_table(struct mlx4_dev *dev, u8 port,
return err;
}
+int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx)
+{
+ struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table;
+ int i;
+
+ for (i = 0; i < MLX4_MAX_VLAN_NUM; ++i) {
+ if (table->refs[i] &&
+ (vid == (MLX4_VLAN_MASK &
+ be32_to_cpu(table->entries[i])))) {
+ /* VLAN already registered, increase reference count */
+ *idx = i;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(mlx4_find_cached_vlan);
+
int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
{
struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table;
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index f3f8be5..14f0955 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -430,8 +430,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
}
/* Get the protocol type of the ethernet frame that arrived */
- proto_type = ((in_be32(addr + XEL_HEADER_OFFSET +
- XEL_RXBUFF_OFFSET) >> XEL_HEADER_SHIFT) &
+ proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+ XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
/* Check if received ethernet frame is a raw ethernet frame
@@ -439,9 +439,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
if (proto_type == ETH_P_IP) {
- length = ((in_be32(addr +
+ length = ((ntohl(in_be32(addr +
XEL_HEADER_IP_LENGTH_OFFSET +
- XEL_RXBUFF_OFFSET) >>
+ XEL_RXBUFF_OFFSET)) >>
XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
length += ETH_HLEN + ETH_FCS_LEN;
generated by cgit v1.1 at 2025-08-16 14:08:45 +0000