aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/Kconfig14
-rw-r--r--drivers/tty/serial/amba-pl011.c14
-rw-r--r--drivers/tty/serial/atmel_serial.c5
-rw-r--r--drivers/tty/serial/crisv10.c4
-rw-r--r--drivers/tty/serial/jsm/jsm.h7
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c2
-rw-r--r--drivers/tty/serial/jsm/jsm_neo.c29
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c94
-rw-r--r--drivers/tty/serial/pch_uart.c13
-rw-r--r--drivers/tty/serial/pxa.c20
-rw-r--r--drivers/tty/serial/serial_core.c2
-rw-r--r--drivers/tty/serial/sh-sci.c15
12 files changed, 98 insertions, 121 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b3692e6..9789293 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1585,7 +1585,7 @@ config SERIAL_IFX6X60
Support for the IFX6x60 modem devices on Intel MID platforms.
config SERIAL_PCH_UART
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
depends on PCI
select SERIAL_CORE
help
@@ -1593,12 +1593,12 @@ config SERIAL_PCH_UART
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config SERIAL_MSM_SMD
bool "Enable tty device interface for some SMD ports"
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index f5f6831..4a4733e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1733,9 +1733,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
unsigned int status, old_cr, new_cr;
+ unsigned long flags;
+ int locked = 1;
clk_enable(uap->clk);
+ local_irq_save(flags);
+ if (uap->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&uap->port.lock);
+ else
+ spin_lock(&uap->port.lock);
+
/*
* First save the CR then disable the interrupts
*/
@@ -1755,6 +1765,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
} while (status & UART01x_FR_BUSY);
writew(old_cr, uap->port.membase + UART011_CR);
+ if (locked)
+ spin_unlock(&uap->port.lock);
+ local_irq_restore(flags);
+
clk_disable(uap->clk);
}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index af9b781..b989495 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -199,8 +199,9 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int mode;
+ unsigned long flags;
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
/* Disable interrupts */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
@@ -231,7 +232,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
}
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 225123b..58be715 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -4450,7 +4450,7 @@ static int __init rs_init(void)
#if defined(CONFIG_ETRAX_RS485)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
- if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
@@ -4459,7 +4459,7 @@ static int __init rs_init(void)
}
#endif
#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index b704c8c..5b837e7 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -183,10 +183,8 @@ struct jsm_board
/* Our Read/Error/Write queue sizes */
#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
-#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
#define RQUEUESIZE (RQUEUEMASK + 1)
#define EQUEUESIZE RQUEUESIZE
-#define WQUEUESIZE (WQUEUEMASK + 1)
/************************************************************************
@@ -226,10 +224,6 @@ struct jsm_channel {
u16 ch_e_head; /* Head location of the error queue */
u16 ch_e_tail; /* Tail location of the error queue */
- u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */
- u16 ch_w_head; /* Head location of the write queue */
- u16 ch_w_tail; /* Tail location of the write queue */
-
u64 ch_rxcount; /* total of data received so far */
u64 ch_txcount; /* total of data transmitted so far */
@@ -378,7 +372,6 @@ extern int jsm_debug;
* Prototypes for non-static functions used in more than one module
*
*************************************************************************/
-int jsm_tty_write(struct uart_port *port);
int jsm_tty_init(struct jsm_board *);
int jsm_uart_port_init(struct jsm_board *);
int jsm_remove_uart_port(struct jsm_board *);
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 96da178..6c12d94 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -211,7 +211,6 @@ static void __devexit jsm_remove_one(struct pci_dev *pdev)
if (brd->channels[i]) {
kfree(brd->channels[i]->ch_rqueue);
kfree(brd->channels[i]->ch_equeue);
- kfree(brd->channels[i]->ch_wqueue);
kfree(brd->channels[i]);
}
}
@@ -270,6 +269,7 @@ static void jsm_io_resume(struct pci_dev *pdev)
struct jsm_board *brd = pci_get_drvdata(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
jsm_uart_port_init(brd);
}
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 4538c3e..bd6e846 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -496,12 +496,15 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
int s;
int qlen;
u32 len_written = 0;
+ struct circ_buf *circ;
if (!ch)
return;
+ circ = &ch->uart_port.state->xmit;
+
/* No data to write to the UART */
- if (ch->ch_w_tail == ch->ch_w_head)
+ if (uart_circ_empty(circ))
return;
/* If port is "stopped", don't send any data to the UART */
@@ -517,11 +520,10 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
if (ch->ch_cached_lsr & UART_LSR_THRE) {
ch->ch_cached_lsr &= ~(UART_LSR_THRE);
- writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+ writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx);
jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
- "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]);
- ch->ch_w_tail++;
- ch->ch_w_tail &= WQUEUEMASK;
+ "Tx data: %x\n", circ->buf[circ->head]);
+ circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1);
ch->ch_txcount++;
}
return;
@@ -536,36 +538,36 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel;
/* cache head and tail of queue */
- head = ch->ch_w_head & WQUEUEMASK;
- tail = ch->ch_w_tail & WQUEUEMASK;
- qlen = (head - tail) & WQUEUEMASK;
+ head = circ->head & (UART_XMIT_SIZE - 1);
+ tail = circ->tail & (UART_XMIT_SIZE - 1);
+ qlen = uart_circ_chars_pending(circ);
/* Find minimum of the FIFO space, versus queue length */
n = min(n, qlen);
while (n > 0) {
- s = ((head >= tail) ? head : WQUEUESIZE) - tail;
+ s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
s = min(s, n);
if (s <= 0)
break;
- memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+ memcpy_toio(&ch->ch_neo_uart->txrxburst, circ->buf + tail, s);
/* Add and flip queue if needed */
- tail = (tail + s) & WQUEUEMASK;
+ tail = (tail + s) & (UART_XMIT_SIZE - 1);
n -= s;
ch->ch_txcount += s;
len_written += s;
}
/* Update the final tail */
- ch->ch_w_tail = tail & WQUEUEMASK;
+ circ->tail = tail & (UART_XMIT_SIZE - 1);
if (len_written >= ch->ch_t_tlevel)
ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
- if (!jsm_tty_write(&ch->uart_port))
+ if (uart_circ_empty(circ))
uart_write_wakeup(&ch->uart_port);
}
@@ -946,7 +948,6 @@ static void neo_param(struct jsm_channel *ch)
if ((ch->ch_c_cflag & (CBAUD)) == 0) {
ch->ch_r_head = ch->ch_r_tail = 0;
ch->ch_e_head = ch->ch_e_tail = 0;
- ch->ch_w_head = ch->ch_w_tail = 0;
neo_flush_uart_write(ch);
neo_flush_uart_read(ch);
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 7a4a914..434bd88 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -118,6 +118,19 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
udelay(10);
}
+/*
+ * jsm_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+static void jsm_tty_write(struct uart_port *port)
+{
+ struct jsm_channel *channel;
+ channel = container_of(port, struct jsm_channel, uart_port);
+ channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
+}
+
static void jsm_tty_start_tx(struct uart_port *port)
{
struct jsm_channel *channel = (struct jsm_channel *)port;
@@ -216,14 +229,6 @@ static int jsm_tty_open(struct uart_port *port)
return -ENOMEM;
}
}
- if (!channel->ch_wqueue) {
- channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL);
- if (!channel->ch_wqueue) {
- jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
- "unable to allocate write queue buf");
- return -ENOMEM;
- }
- }
channel->ch_flags &= ~(CH_OPENING);
/*
@@ -237,7 +242,6 @@ static int jsm_tty_open(struct uart_port *port)
*/
channel->ch_r_head = channel->ch_r_tail = 0;
channel->ch_e_head = channel->ch_e_tail = 0;
- channel->ch_w_head = channel->ch_w_tail = 0;
brd->bd_ops->flush_uart_write(channel);
brd->bd_ops->flush_uart_read(channel);
@@ -836,75 +840,3 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
}
}
}
-
-/*
- * jsm_tty_write()
- *
- * Take data from the user or kernel and send it out to the FEP.
- * In here exists all the Transparent Print magic as well.
- */
-int jsm_tty_write(struct uart_port *port)
-{
- int bufcount;
- int data_count = 0,data_count1 =0;
- u16 head;
- u16 tail;
- u16 tmask;
- u32 remain;
- int temp_tail = port->state->xmit.tail;
- struct jsm_channel *channel = (struct jsm_channel *)port;
-
- tmask = WQUEUEMASK;
- head = (channel->ch_w_head) & tmask;
- tail = (channel->ch_w_tail) & tmask;
-
- if ((bufcount = tail - head - 1) < 0)
- bufcount += WQUEUESIZE;
-
- bufcount = min(bufcount, 56);
- remain = WQUEUESIZE - head;
-
- data_count = 0;
- if (bufcount >= remain) {
- bufcount -= remain;
- while ((port->state->xmit.head != temp_tail) &&
- (data_count < remain)) {
- channel->ch_wqueue[head++] =
- port->state->xmit.buf[temp_tail];
-
- temp_tail++;
- temp_tail &= (UART_XMIT_SIZE - 1);
- data_count++;
- }
- if (data_count == remain) head = 0;
- }
-
- data_count1 = 0;
- if (bufcount > 0) {
- remain = bufcount;
- while ((port->state->xmit.head != temp_tail) &&
- (data_count1 < remain)) {
- channel->ch_wqueue[head++] =
- port->state->xmit.buf[temp_tail];
-
- temp_tail++;
- temp_tail &= (UART_XMIT_SIZE - 1);
- data_count1++;
-
- }
- }
-
- port->state->xmit.tail = temp_tail;
-
- data_count += data_count1;
- if (data_count) {
- head &= tmask;
- channel->ch_w_head = head;
- }
-
- if (data_count) {
- channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
- }
-
- return data_count;
-}
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4652109..902588b 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -256,6 +256,8 @@ enum pch_uart_num_t {
pch_ml7213_uart2,
pch_ml7223_uart0,
pch_ml7223_uart1,
+ pch_ml7831_uart0,
+ pch_ml7831_uart1,
};
static struct pch_uart_driver_data drv_dat[] = {
@@ -268,6 +270,8 @@ static struct pch_uart_driver_data drv_dat[] = {
[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
};
static unsigned int default_baud = 9600;
@@ -625,6 +629,7 @@ static void pch_request_dma(struct uart_port *port)
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
__func__);
dma_release_channel(priv->chan_tx);
+ priv->chan_tx = NULL;
return;
}
@@ -1212,8 +1217,7 @@ static void pch_uart_shutdown(struct uart_port *port)
dev_err(priv->port.dev,
"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
- if (priv->use_dma_flag)
- pch_free_dma(port);
+ pch_free_dma(port);
free_irq(priv->port.irq, priv);
}
@@ -1277,6 +1281,7 @@ static void pch_uart_set_termios(struct uart_port *port,
if (rtn)
goto out;
+ pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1545,6 +1550,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
.driver_data = pch_ml7223_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
.driver_data = pch_ml7223_uart1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+ .driver_data = pch_ml7831_uart0},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+ .driver_data = pch_ml7831_uart1},
{0,},
};
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 4302e6e..81243a6 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -100,6 +100,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
int max_count = 256;
do {
+ /* work around Errata #20 according to
+ * Intel(R) PXA27x Processor Family
+ * Specification Update (May 2005)
+ *
+ * Step 2
+ * Disable the Reciever Time Out Interrupt via IER[RTOEI]
+ */
+ up->ier &= ~UART_IER_RTOIE;
+ serial_out(up, UART_IER, up->ier);
+
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
@@ -156,6 +166,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
tty_flip_buffer_push(tty);
+
+ /* work around Errata #20 according to
+ * Intel(R) PXA27x Processor Family
+ * Specification Update (May 2005)
+ *
+ * Step 6:
+ * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
+ */
+ up->ier |= UART_IER_RTOIE;
+ serial_out(up, UART_IER, up->ier);
}
static void transmit_chars(struct uart_pxa_port *up)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 62ba22f..5668b3e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2006,6 +2006,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
if (port->tty && port->tty->termios && termios.c_cflag == 0)
termios = *(port->tty->termios);
+ if (console_suspend_enabled)
+ uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
if (console_suspend_enabled)
console_start(uport->cons);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ebd8629..bead17e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -953,17 +953,20 @@ static void sci_dma_tx_complete(void *arg)
port->icount.tx += sg_dma_len(&s->sg_tx);
async_tx_ack(s->desc_tx);
- s->cookie_tx = -EINVAL;
s->desc_tx = NULL;
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
schedule_work(&s->work_tx);
- } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 ctrl = sci_in(port, SCSCR);
- sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = sci_in(port, SCSCR);
+ sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -1225,8 +1228,10 @@ static void sci_start_tx(struct uart_port *port)
}
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
- s->cookie_tx < 0)
+ s->cookie_tx < 0) {
+ s->cookie_tx = 0;
schedule_work(&s->work_tx);
+ }
#endif
if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
generated by cgit v1.1 at 2025-08-17 09:41:10 +0000