diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 7 | ||||
| -rw-r--r-- | drivers/usb/host/pci-quirks.h | 1 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 8 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 1 |
5 files changed, 25 insertions, 2 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 9ab094c..efba0188 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -798,6 +798,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8..ef004a5 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 39e230f..b047458 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -140,11 +140,21 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 16ec4d3..1f9602a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -163,7 +163,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -172,7 +172,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + return handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); } /* @@ -593,6 +594,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks && XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 25c3e26..d88644d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1316,6 +1316,7 @@ struct xhci_hcd { #define XHCI_RESET_ON_RESUME (1 << 7) #define XHCI_AMD_0x96_HOST (1 << 9) #define XHCI_TRUST_TX_LENGTH (1 << 10) +#define XHCI_SPURIOUS_REBOOT (1 << 13) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ |