3 files changed, 68 insertions, 16 deletions

diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index 56f8dea..b318430 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -74,6 +74,45 @@
 #define AB8500_INT_ACC_DETECT_21DB_F	37
 #define AB8500_INT_ACC_DETECT_21DB_R	38
 #define AB8500_INT_GP_SW_ADC_CONV_END	39
+#define AB8500_INT_ACC_DETECT_1DB_F	33
+#define AB8500_INT_ACC_DETECT_1DB_R	34
+#define AB8500_INT_ACC_DETECT_22DB_F	35
+#define AB8500_INT_ACC_DETECT_22DB_R	36
+#define AB8500_INT_ACC_DETECT_21DB_F	37
+#define AB8500_INT_ACC_DETECT_21DB_R	38
+#define AB8500_INT_GP_SW_ADC_CONV_END	39
+#define AB8500_INT_GPIO6R		40
+#define AB8500_INT_GPIO7R		41
+#define AB8500_INT_GPIO8R		42
+#define AB8500_INT_GPIO9R		43
+#define AB8500_INT_GPIO10R		44
+#define AB8500_INT_GPIO11R		45
+#define AB8500_INT_GPIO12R		46
+#define AB8500_INT_GPIO13R		47
+#define AB8500_INT_GPIO24R		48
+#define AB8500_INT_GPIO25R		49
+#define AB8500_INT_GPIO36R		50
+#define AB8500_INT_GPIO37R		51
+#define AB8500_INT_GPIO38R		52
+#define AB8500_INT_GPIO39R		53
+#define AB8500_INT_GPIO40R		54
+#define AB8500_INT_GPIO41R		55
+#define AB8500_INT_GPIO6F		56
+#define AB8500_INT_GPIO7F		57
+#define AB8500_INT_GPIO8F		58
+#define AB8500_INT_GPIO9F		59
+#define AB8500_INT_GPIO10F		60
+#define AB8500_INT_GPIO11F		61
+#define AB8500_INT_GPIO12F		62
+#define AB8500_INT_GPIO13F		63
+#define AB8500_INT_GPIO24F		64
+#define AB8500_INT_GPIO25F		65
+#define AB8500_INT_GPIO36F		66
+#define AB8500_INT_GPIO37F		67
+#define AB8500_INT_GPIO38F		68
+#define AB8500_INT_GPIO39F		69
+#define AB8500_INT_GPIO40F		70
+#define AB8500_INT_GPIO41F		71
 #define AB8500_INT_ADP_SOURCE_ERROR	72
 #define AB8500_INT_ADP_SINK_ERROR	73
 #define AB8500_INT_ADP_PROBE_PLUG	74
@@ -139,19 +178,27 @@ struct ab8500 {
 	u8 oldmask[AB8500_NUM_IRQ_REGS];
 };
 
+struct regulator_reg_init;
 struct regulator_init_data;
+struct ab8500_gpio_platform_data;
 
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
+ * @num_regulator_reg_init: number of regulator init registers
+ * @regulator_reg_init: regulator init registers
+ * @num_regulator: number of regulators
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	void (*init) (struct ab8500 *);
+	int num_regulator_reg_init;
+	struct ab8500_regulator_reg_init *regulator_reg_init;
 	int num_regulator;
 	struct regulator_init_data *regulator;
+	struct ab8500_gpio_platform_data *gpio;
 };
 
 extern int __devinit ab8500_init(struct ab8500 *ab8500);
diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h
new file mode 100644
index 0000000..488a8c9
--- /dev/null
+++ b/include/linux/mfd/ab8500/gpio.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright ST-Ericsson 2010.
+ *
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ * Licensed under GPLv2.
+ */
+
+#ifndef _AB8500_GPIO_H
+#define _AB8500_GPIO_H
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+
+struct ab8500_gpio_platform_data {
+	int gpio_base;
+	u32 irq_base;
+	u8  config_reg[7];
+};
+
+#endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h
deleted file mode 100644
index c981b95..0000000
--- a/include/linux/mfd/sh_mobile_sdhi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __SH_MOBILE_SDHI_H__
-#define __SH_MOBILE_SDHI_H__
-
-#include <linux/types.h>
-
-struct sh_mobile_sdhi_info {
-	int dma_slave_tx;
-	int dma_slave_rx;
-	unsigned long tmio_flags;
-	unsigned long tmio_caps;
-	u32 tmio_ocr_mask;	/* available MMC voltages */
-	void (*set_pwr)(struct platform_device *pdev, int state);
-	int (*get_cd)(struct platform_device *pdev);
-};
-
-#endif /* __SH_MOBILE_SDHI_H__ */