aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chipsGabor Juhos2010-08-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: cfi_cmdset_0002: consider version 1.4 as a valid primary extension versionGuillaume LECERF2010-08-061-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Spansion S29WS-P device family uses CFI version 1.4 [1]. Consider it as a valid version. [1] http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: atmel_nand: fix warning: 'part_probes' defined but not usedAndreas Bießmann2010-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes drivers/mtd/nand/atmel_nand.c:372: warning: 'part_probes' defined but not used which is issued when CONFIG_MTD_PARTITIONS is defined but CONFIG_MTD_CMDLINE_PARTS not. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: change struct flchip_shared spinlock locking into mutexStefani Seibold2010-08-062-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prevent to schedule while atomic by changing the flchip_shared spinlock into a mutex. This should be save since no atomic path will use this lock. It was suggested by Arnd Bergmann and Vasiliy Kulikov. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Missing slab.h includeDavid Miller2010-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: gen_nand: fix support for multiple chipsMarek Vasut2010-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: update description on sm_ftlMaxim Levitsky2010-08-061-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think that scary description can go now... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: blkdevs: fix crash related to sysfs attributes.Maxim Levitsky2010-08-061-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the attributes group before disk to avoid use after free Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali: update get nand para functionsChuanxiao Dong2010-08-051-72/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In denali driver, wTotalBlocks variable is useless, so just remove them in get_toshiba_nand_para and get_hynix_nand_para first. Other wTotalBlocks in denali.c and other variables in dev_info struct are also useless, will remove them later. Also add a parameter in get_hynix_nand_para to prepare to remove dev_info struct. This parameter comes by reading NAND ID directly. Reading register will report wrong value for some NAND chips, e.g. some Micron MT29F32G08QAA chips. So update NAND_CMD_READID method as well. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali: rename functions which is named by using capitalsChuanxiao Dong2010-08-052-16/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rename these functions' name and remove additional declarations in header file Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali.c: fix reserved all check-patch errorsChuanxiao Dong2010-08-051-49/+53
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali.c: fix all "line over 80 characters" warningsChuanxiao Dong2010-08-051-108/+192
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali.c: add and update KERN_ facility level in printk()Chuanxiao Dong2010-08-051-16/+16
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali.c: fixed all open brace { check-patch errorsChuanxiao Dong2010-08-051-116/+48
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | nand/denali Clean up all white spaces in code indentChuanxiao2010-08-051-169/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, I have changed the outlook mail cliet to be linux mutt client and use my personal gmail to submit patches. Here are 5 new patches to fix nand/denali check patch errors. The other 4 patches will be sent out after this mail. Thanks for your review. >From d125ad3f57bbf517131dccad6b5933edf8c2632a Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Tue, 3 Aug 2010 15:54:48 +0800 Subject: [PATCH 1/5] mtd: denali.c: clean up all whitespaces in code indent Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: fix nand busy detectionBarry Song2010-08-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IRQSTAT register is a W1C register used by the interrupt handler and may have its BUSY bit changed. This makes it somewhat unreliable for the polling devready function. So switch it over to use the BUSY bit in the STAT register that always reflects the current state of the hardware. This fixes driver hangs seen when the NAND flash is under heavy system load (like I/O benchmarks). Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: fix handling of page sizesBarry Song2010-08-051-38/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than forcing the platform resources to declare the desired page size, simply use the existing information passed down to us by the higher layers. This way we work out of the box with all flash chips that the kernel knows about. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: wait for the ECC reset to finishBarry Song2010-08-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When resetting the ECC registers/counters, the bit will automatically clear itself once the reset has actually finished. So make sure we wait for that to occur before doing anything else rather than assuming everything is peachy and proceeding with stale ECC values. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: fix typo for read/write delay setupBarry Song2010-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We used the platform rd_dly field when we meant to use the wr_dly field. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: make sure to check NAND_ALE in cmd_ctrlBarry Song2010-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NAND base may send some controls which are neither CLE nor ALE, so we need to explicitly check both instead of assuming things are always one or the other. Otherwise, we sometimes send out illegal addresses to the NAND device. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: fix raw page write/read handlingBarry Song2010-08-051-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our write_buf/read_buf funcs always do ECC in HW ECC mode. That is not needed for raw funcs. In fact, write_buf/read_buf should be a pure func for data input/output while chip->ecc.hwctl controls ECC. Unfortunately, we can't separate ECC from normal data input/output in our NFC, so our DMA write_buf/read_buf entries are coupled with ECC operations closely. Thus we need to provide dedicated read_page_raw/write_page_raw funcs where we do non-DMA transactions so as to avoid automatic ECC. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: Blackfin NFC: delete useless comment about jffs2Barry Song2010-08-051-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The low level NAND driver doesn't care about filesystems, so punt the local comment indicating otherwise. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: cfi_cmdset_0002: fix the check for valid primary extension versionsGuillaume LECERF2010-08-041-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3 [1][2]. Fix the check in cfi_cmdset_0002 accordingly. [1] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 [2] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: m25p80: Make jedec_probe() return proper errno valuesAnton Vorontsov2010-08-041-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_write_then_read() may return its own return codes (e.g. -EIO), so let's propagate the value down to the probe(). Also, remove jedec == 0 check, it isn't needed as nowadays we use dedicated SPI device IDs for non-JEDEC flashes. Suggested-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: m25p80: Fix false-positive probingAnton Vorontsov2010-08-041-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework probing/JEDEC code"), m25p80 driver successfully registers chips even if JEDEC probing fails. This was needed to support non-JEDEC flashes. Though, it appears that some platforms (e.g. blackfin bf533 stamp[1]) used the old behavior to detect if there's any flash connected, so the driver have to fail on JEDEC probing errors. This patch restores the old behavior for JEDEC flashes, and adds "-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel still supports non-JEDEC flashes. [1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975 Reported-by: Mingquan Pan Reported-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mtdchar: fix mmap for MTD RAM/ROM char devicesAnatolij Gustschin2010-08-041-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For no-mmu systems mmap() on RAM/ROM devices already works but for systems with mmu it probably was not tested and doesn't work. This patch allows using mmap() on MTD RAM/ROM devices on systems with MMU. It has been tested on mpc5121e based platform with MR0A16A MRAM device attached over LocalBus. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: ixp4xx: add support for static flash partitionsRichard Cochran2010-08-041-8/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for static flash partitioning from a platform device. Also, we clean up some weirdness where statements were separated by commas instead of semicolons. While we are at it, fix some minor bad white space, too. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mxc_nand: dont call suspend and resume explicitlyEric Bénard2010-08-041-42/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mtd layer is responsible to call mtd->{suspend,resume}. Doing it again in the driver is wrong and results in a warning: nand_resume called for a chip which is not in suspended state at resume time. Removing the calls from the resume and suspend functions makes them empty allowing them to be deleted completely. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: doc2000: fix uninitialized variable in doc_ecc_decode()Mark Ware2010-08-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable 'syn' was being used uninitialized. Also fixed incorrect use of syn[] vs s[]. Tested on powerpc board with 64MiB DOC2000. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: OneNAND: Samsung SoCs use own chip_probe functionKyungmin Park2010-08-041-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Samsung SoCs use own chip_probe function. Don't touch the memory configuration at probe time. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: OneNAND: Introduce chip_probe functionKyungmin Park2010-08-041-12/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Samsung SoCs use the own OneNAND controler and detect OneNAND chip at power on. To use this feature, introduce the chip_probe function. Also remove workaround for Samsung SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: onenand:fix for page addr calculation based on device typeRohit Hassan Sathyanarayan2010-08-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sending the patch for page address calculation based on device type. This resolves the OneNAND DDP device read problem as pointed by Enric. http://lists.infradead.org/pipermail/linux-mtd/2010-July/030920.html Signed-off-by: Rohit HS <rohit.hs@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand: update nand_default_block_markbad()Brian Norris2010-08-021-10/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an update that depends on the previous patches I sent. We can now write to all the appropriate BB marker locations (i.e. pages 1 AND 2, bytes 1 AND 6) with nand_default_block_markbad() if necessary, according to the flags marked in chip->options. Note that I removed the line: ofs += mtd->oobsize; Unless I am wrong, this line was completely unnecessary in the first place. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: denali.h: fixed checkpatch errorsDong, Chuanxiao2010-08-021-82/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix all checkpatch.pl complaints. Artem: tweaked a little and fix tab indentations, so now this is not only about checkpatch, but also about making indentations look sane. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand: davinci: correct 4-bit error correctionSudhakar Rajashekhara2010-08-021-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the 4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and before waiting for the NAND Flash status register to be equal to 1, 2 or 3, we have to wait till the ECC HW goes to correction state. Without this wait, ECC correction calculations will not be proper. This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365 EVMs. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand: more BB Detection refactoring and dynamic scan optionsBrian Norris2010-08-022-55/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a revision to PATCH 2/2 that I sent. Link: http://lists.infradead.org/pipermail/linux-mtd/2010-July/030911.html Added new flag for scanning of both bytes 1 and 6 of the OOB for a BB marker (instead of simply one or the other). The "check_pattern" and "check_short_pattern" functions were updated to include support for scanning the two different locations in the OOB. In order to handle increases in variety of necessary scanning patterns, I implemented dynamic memory allocation of nand_bbt_descr structs in new function 'nand_create_default_bbt_descr()'. This replaces some increasingly-unwieldy, statically-declared descriptors. It can replace several more (e.g. "flashbased" structs). However, I do not test the flashbased options personally. How this was tested: I referenced 30+ data sheets (covering 100+ parts), and I tested a selection of 10 different chips to varying degrees. Particularly, I tested the creation of bad-block descriptors and basic BB scanning on three parts: ST NAND04GW3B2D, 2K page ST NAND128W3A, 512B page Samsung K9F1G08U0A, 2K page To test these, I wrote some fake bad block markers to the flash (in OOB bytes 1, 6, and elsewhere) to see if the scanning routine would detect them properly. However, this method was somewhat limited because the driver I am using has some bugs in its OOB write functionality. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand: refactor BB marker detectionBrian Norris2010-08-022-11/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some level of support for various scanning locations was already built in, but this required clean-up. First, BB marker location cannot be determined _only_ by the page size. Instead, I implemented some heuristic detection based on data sheets from various manufacturers (all found in nand_base.c:nand_get_flash_type()). Second, once these options were identified, they were not handled properly by nand_bbt.c:nand_default_bbt(). I updated the static nand_bbt_desc structs to reflect the need for more combinations of detection. The memory allocation here probably needs to be done dynamically in the very near future (see next patches). Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: s3c nand: parsing command-line partitions prior to set->partitionsConke Hu2010-08-021-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current driver prevents command-line partitions from being parsed when built-in partitions are defined in s3c2410_nand_set object, but it is not desirable in some cases. This patch tries to parse commad-line partitions prior to the built-in. Signed-off-by: Conke Hu <conke@maxwit.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mxc_nand: fix unbalanced enable for IRQEric Bénard2010-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * preset should be done before sending the reset command * without this, I get the following error on an i.MX35 : [ 0.900000] ------------[ cut here ]------------ [ 0.900000] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x4c/0x88() [ 0.900000] Unbalanced enable for IRQ 33 [ 0.900000] Modules linked in: [ 0.900000] [<c002ffb8>] (unwind_backtrace+0x0/0xf0) from [<c02f7d0c>] (dump_stack+0x18/0x1c) [ 0.900000] [<c02f7d0c>] (dump_stack+0x18/0x1c) from [<c0049a44>] (warn_slowpath_common+0x54/0x6c) [ 0.900000] [<c0049a44>] (warn_slowpath_common+0x54/0x6c) from [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) [ 0.900000] [<c0049b00>] (warn_slowpath_fmt+0x38/0x40) from [<c008f65c>] (__enable_irq+0x4c/0x88) [ 0.900000] [<c008f65c>] (__enable_irq+0x4c/0x88) from [<c008fca0>] (enable_irq+0x54/0x98) [ 0.900000] [<c008fca0>] (enable_irq+0x54/0x98) from [<c021e618>] (wait_op_done+0x40/0x134) [ 0.900000] [<c021e618>] (wait_op_done+0x40/0x134) from [<c021e808>] (send_cmd+0x30/0x38) [ 0.900000] [<c021e808>] (send_cmd+0x30/0x38) from [<c021eb8c>] (mxc_nand_command+0x26c/0x328) [ 0.900000] [<c021eb8c>] (mxc_nand_command+0x26c/0x328) from [<c021aa60>] (nand_scan_ident+0x188/0x6c0) [ 0.900000] [<c021aa60>] (nand_scan_ident+0x188/0x6c0) from [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) [ 0.900000] [<c001a9cc>] (mxcnd_probe+0x2b8/0x3d0) from [<c01f9e88>] (platform_drv_probe+0x20/0x24) [ 0.900000] [<c01f9e88>] (platform_drv_probe+0x20/0x24) from [<c01f8c38>] (driver_probe_device+0xb0/0x164) [ 0.900000] [<c01f8c38>] (driver_probe_device+0xb0/0x164) from [<c01f8d54>] (__driver_attach+0x68/0x8c) [ 0.900000] [<c01f8d54>] (__driver_attach+0x68/0x8c) from [<c01f8348>] (bus_for_each_dev+0x50/0x84) [ 0.900000] [<c01f8348>] (bus_for_each_dev+0x50/0x84) from [<c01f8a9c>] (driver_attach+0x20/0x28) [ 0.900000] [<c01f8a9c>] (driver_attach+0x20/0x28) from [<c01f7c00>] (bus_add_driver+0x144/0x2dc) [ 0.900000] [<c01f7c00>] (bus_add_driver+0x144/0x2dc) from [<c01f906c>] (driver_register+0xb0/0x13c) [ 0.900000] [<c01f906c>] (driver_register+0xb0/0x13c) from [<c01fa13c>] (platform_driver_register+0x4c/0x60) [ 0.900000] [<c01fa13c>] (platform_driver_register+0x4c/0x60) from [<c01fa170>] (platform_driver_probe+0x20/0xa0) [ 0.900000] [<c01fa170>] (platform_driver_probe+0x20/0xa0) from [<c001a708>] (mxc_nd_init+0x18/0x24) [ 0.900000] [<c001a708>] (mxc_nd_init+0x18/0x24) from [<c002938c>] (do_one_initcall+0x64/0x1bc) [ 0.900000] [<c002938c>] (do_one_initcall+0x64/0x1bc) from [<c00084c4>] (kernel_init+0xe8/0x1ac) [ 0.900000] [<c00084c4>] (kernel_init+0xe8/0x1ac) from [<c002aee8>] (kernel_thread_exit+0x0/0x8) [ 0.900000] ---[ end trace 8bf72ac6ba089a19 ]--- [ 1.140000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: tests: return -1 if verify failedRoel Kluin2010-08-021-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: sm_common: remove casts from voidKulikov Vasiliy2010-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: r852: remove casts from voidKulikov Vasiliy2010-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nandsim: remove casts from voidKulikov Vasiliy2010-08-021-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: dataflash: remove casts from voidKulikov Vasiliy2010-08-021-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: r852: remove casts from voidKulikov Vasiliy2010-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: cfi_probe: print manufacturer and id of probed chipGuillaume LECERF2010-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand: edit macro flag for BBT scan of last page in blockBrian Norris2010-08-022-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND_BB_LAST_PAGE used to be in nand.h, but it pertained to bad block management and so belongs next to NAND_BBT_SCAN2NDPAGE in bbm.h. Also, its previous flag value (0x00000400) conflicted with NAND_BBT_SCANALLPAGES so I changed its value to 0x00008000. All uses of the name were modified to provide consistency with other "NAND_BBT_*" flags. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mtdconcat: fix bug with uninitialized lock and unlock functionsMartin Krause2010-08-021-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Test if a lock or unlock function is present (pointer not NULL) before calling it, to prevent a kernel dump. Artem: removed extra blank lines Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: nand_ids: add two entries for NAND chipsBrian Norris2010-08-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Included the basic size info for NAND chips with ID of 0xAD or 0xD7. The first can be found in Hynix HY27SF161G2M, while the second can be found in Micron MT29F64G08 and the Samsung K9LBG08U0D (among others). Also, some 64 Gbit (or larger) chips identify as 0xD7 because they contain multiple smaller 32 Gbit chips. I assume it's safe to classify these under the 32 Gbit listing. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mxc_nand: remove unused variableUwe Kleine-König2010-08-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes: drivers/mtd/nand/mxc_nand.c: In function 'mxcnd_resume': drivers/mtd/nand/mxc_nand.c:901: warning: unused variable 'host' Removing this variable was missed in 9c14b153e6af. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.1 at 2024-12-28 10:07:55 +0000