aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAgeFilesLines
* iwlagn: do not use interruptible waitsJohannes Berg2011-11-116-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream commit effd4d9aece9184f526e6556786a94d335e38b71. Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* wl12xx: fix forced passive scansLuciano Coelho2011-11-111-6/+13
| | | | | | | | | | | | | | | commit 6cd9d21a0c1e2648c07c32c66bb25795ad3208aa upstream. We were using incorrect max and min dwell times during forced passive scans because we were still using the active scan states to scan (passively) the channels that were not marked as passive. Instead of doing passive scans in active states, we now skip active states and scan for all channels in passive states. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k: disable unnecessary PHY error reportingFelix Fietkau2011-11-112-9/+1
| | | | | | | | | | | | | | commit ac06697c79bad09e44a8b1d52104014016fb90de upstream. PHY errors relevant for ANI are always tracked by hardware counters, the bits that allow them to pass through the rx filter are independent of that. Enabling PHY errors in the rx filter often creates lots of useless DMA traffic and might be responsible for some of the rx dma stop failure warnings. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix number of GPIO pins for AR9287/9300Mohammed Shafi Shajakhan2011-11-111-0/+4
| | | | | | | | | | | | | | | commit 6321eb0977b011ac61dfca36e7c69b2c4325b104 upstream. this patch fixes the assumption of maximum number of GPIO pins present in AR9287/AR9300. this fix is essential as we might encounter some functionality issues involved in accessing the status of GPIO pins which are all incorrectly assumed to be not within the range of max_num_gpio of AR9300/AR9287 chipsets Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_htc: add AVM FRITZ!WLAN 11N v2 supportLuis R. Rodriguez2011-11-111-0/+1
| | | | | | | | | | | | | | | | | commit 8c34559b4a6df32e4af1b073397fa4dc189a5485 upstream. This was reported and tested by Martin Walter over at AVM GmbH Berlin. This also applies to 3.0.1 so sendint to stable. Cc: s.kirste@avm.de Cc: d.friedel@avm.de Cc: Martin Walter <m.walter@avm.de> Cc: Peter Grabienski <pgrabien@qca.qualcomm.com> Tested-by: Martin Walter <m.walter@avm.de> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix magnitude/phase coeff correctionRajkumar Manoharan2011-11-111-1/+2
| | | | | | | | | | | | | | | | | commit e9c10469cf3c71bc1c6b0f01319161e277d6ac9b upstream. Do the magnitude/phase coeff correction only if the outlier is detected. Updating wrong magnitude/phase coeff factor impacts not only tx gain setting but also leads to poor performance in congested networks. In the clear environment the impact is very minimal because the outlier happens very rarely according to the past experiment. It occured less than once every 1000 calibrations. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix descriptor status of TxOpExceededRajkumar Manoharan2011-11-111-2/+2
| | | | | | | | | commit 2a15b394f8e46dd3e2ab365ab41cfa701d92fa77 upstream. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: Serialize TX operations on a queue.Gertjan van Wingerde2011-10-162-5/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 77a861c405da75d81e9e6e32c50eb7f9777777e8 upstream. The rt2x00 driver gets frequent occurrences of the following error message when operating under load: phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. This is caused by simultaneous attempts from mac80211 to send a frame via rt2x00, which are not properly serialized inside rt2x00queue_write_tx_frame, causing the second frame to fail sending with the above mentioned error message. Fix this by introducing a per-queue spinlock to serialize the TX operations on that queue. Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlagn: fix dangling scan requestJohannes Berg2011-10-031-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6c80c39d9a6986a566c30d797aae37bfb697eea3 upstream. If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlegacy: do not use interruptible waitsStanislaw Gruszka2011-10-035-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 65d0f19e583e80e42b1c67c166bfc4dfdf6ab693 upstream. iwlegacy version of fix: commit effd4d9aece9184f526e6556786a94d335e38b71 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Sep 15 11:46:52 2011 -0700 iwlagn: do not use interruptible waits Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtlwifi: rtl8192cu: Fix unitialized structLarry Finger2011-10-031-0/+1
| | | | | | | | | | | | commit 831d85471e761e190c3c8979b37540d699ae5812 upstream. Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to clear it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlegacy: fix command queue timeoutStanislaw Gruszka2011-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2e2a41d6ca07d1b2aa67015c35fd80701c98e867 upstream. iwlegacy version of fix: commit 282cdb325aea4ebbc42ce753b47cc96145eb54bc Author: Johannes Berg <johannes.berg@intel.com> Date: Mon Sep 12 12:09:10 2011 -0700 iwlagn: fix command queue timeout If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. iwlegacy does not support P2P, but this patch fix possible unneeded hardware resets, hence is needed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix Rx DMA stuck for AR9003 chipsRajkumar Manoharan2011-10-031-1/+1
| | | | | | | | | | | | | | commit e9f9530bb697f53dd620df290102359a3325bb23 upstream. During the endurance testing, rx frames are not getting DMAd from MAC whereas pcu rx frame counters are getting updated properly. As per systems team input updated the initval to fix rx dma stuck issue. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlagn: workaround bug crashing some APsDon Fry2011-10-031-0/+5
| | | | | | | | | | | | | | | commit 2249b011432ca3dcce112f0f71e0f531b4bb9347 upstream. This patch reverts commit 9b7688328422b88a7a15dc0dc123ad9ab1a6e22d which was introduced in 2.6.38-rc1. It works around a problem where the iwlagn driver stimulates a bug crashing (requiring power cycle to recover) some APs under heavy traffic. Signed-off-by: Don Fry <donald.h.fry@intel.com> SIgned-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtl2800usb: Fix incorrect storage of MAC address on big-endian platformsLarry Finger2011-10-031-8/+9
| | | | | | | | | | | | | commit daabead1c32f331edcfb255fd973411c667977e8 upstream. The eeprom data is stored in little-endian order in the rt2x00 library. As it was converted to cpu order in the read routines, the data need to be converted to LE on a big-endian platform. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2800pci: Fix compiler error on PowerPCLarry Finger2011-10-031-13/+17
| | | | | | | | | | | | | commit d331eb51e4d4190b2178c30fcafea54a94a577e8 upstream. Using gcc 4.4.5 on a Powerbook G4 with a PPC cpu, a complicated if statement results in incorrect flow, whereas the equivalent switch statement works correctly. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* b43: Fix beacon problem in ad-hoc modeManual Munz2011-10-031-1/+2
| | | | | | | | | | | | | commit 8c23516fbb209ccf8f8c36268311c721faff29ee upstream. In ad-hoc mode, driver b43 does not issue beacons. Signed-off-by: Manual Munz <freifunk@somakoma.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlagn: fix command queue timeoutJohannes Berg2011-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | commit 282cdb325aea4ebbc42ce753b47cc96145eb54bc upstream. If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtlwifi: Fix problem when switching connectionsGeorge2011-10-031-0/+8
| | | | | | | | | | | | | commit bac2555c6d86387132930af4d14cb47c4dd3f4f7 upstream. The driver fails to clear encryption keys making it impossible to switch connections. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtlwifi: rtl8192su: Fix problem connecting to HT-enabled APGeorge2011-10-031-5/+6
| | | | | | | | | | | | | commit 3401dc6eba788ebc7c14ce51018d775b1c263399 upstream. The driver fails to connect to 802.11n-enabled APs. The patch fixes Bug #42262. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: fix calibration on 5 ghzFelix Fietkau2011-10-031-1/+2
| | | | | | | | | | | | | | commit 0e4660cbe51276e86dbdab17228733dbcdb49249 upstream. ADC calibrations cannot run on 5 GHz with fast clock enabled. They need to be disabled, otherwise they'll hang and IQ mismatch calibration will not be run either. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlegacy: fix BUG_ON(info->control.rates[0].idx < 0)Stanislaw Gruszka2011-10-031-5/+8
| | | | | | | | | | | | | | | | | | commit 7c2510120e9b43b0caf32c3786a6ab831f7d9e87 upstream. When trying to connect to 5GHz we can provide negative index to mac80211 what trigger BUG_ON. Reason of iwl-3945-rs malfunction on 5GHz is unknown and needs further investigation. For now, to do not trigger a bug, correct value and just print WARNING. Address bug: https://bugzilla.redhat.com/show_bug.cgi?id=730653 Reported-and-tested-by: Jan Teichmann <jan.teichmann@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: fix crash in rt2800usb_get_txwiStanislaw Gruszka2011-10-031-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 674db1344443204b6ce3293f2df8fd1b7665deea upstream. Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f81b30c9>] rt2800usb_get_txwi+0x19/0x70 [rt2800usb] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 198, comm: kworker/u:3 Tainted: G W 3.0.0-wl+ #9 LENOVO 6369CTO/6369CTO EIP: 0060:[<f81b30c9>] EFLAGS: 00010283 CPU: 1 EIP is at rt2800usb_get_txwi+0x19/0x70 [rt2800usb] EAX: 00000000 EBX: f465e140 ECX: f4494960 EDX: ef24c5f8 ESI: 810f21f5 EDI: f1da9960 EBP: f4581e80 ESP: f4581e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:3 (pid: 198, ti=f4580000 task=f4494960 task.ti=f4580000) Call Trace: [<f804790f>] rt2800_txdone_entry+0x2f/0xf0 [rt2800lib] [<c045110d>] ? warn_slowpath_common+0x7d/0xa0 [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a13>] rt2800usb_work_txdone+0x263/0x360 [rt2800usb] [<c046a8d6>] process_one_work+0x186/0x440 [<c046a85a>] ? process_one_work+0x10a/0x440 [<f81b37b0>] ? rt2800usb_probe_hw+0x120/0x120 [rt2800usb] [<c046c283>] worker_thread+0x133/0x310 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<c046c150>] ? manage_workers+0x1e0/0x1e0 [<c047054c>] kthread+0x7c/0x90 [<c04704d0>] ? __init_kthread_worker+0x60/0x60 [<c0826b42>] kernel_thread_helper+0x6/0x1 Oops might happen because we check rt2x00queue_empty(queue) twice, but this condition can change and we can process entry in rt2800_txdone_entry(), which was already processed by rt2800usb_txdone_entry_check() -> rt2x00lib_txdone_noinfo() and has nullify entry->skb . Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: fix crash in rt2800usb_write_tx_descStanislaw Gruszka2011-10-032-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4b1bfb7d2d125af6653d6c2305356b2677f79dc6 upstream. Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f8e06078>] rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] *pdpt = 000000002408c001 *pde = 0000000024079067 *pte = 0000000000000000 Oops: 0000 [#1] SMP EIP: 0060:[<f8e06078>] EFLAGS: 00010282 CPU: 0 EIP is at rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] EAX: 00000035 EBX: ef2bef10 ECX: 00000000 EDX: d40958a0 ESI: ef1865f8 EDI: ef1865f8 EBP: d4095878 ESP: d409585c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<f8da5e85>] rt2x00queue_write_tx_frame+0x155/0x300 [rt2x00lib] [<f8da424c>] rt2x00mac_tx+0x7c/0x370 [rt2x00lib] [<c04882b2>] ? mark_held_locks+0x62/0x90 [<c081f645>] ? _raw_spin_unlock_irqrestore+0x35/0x60 [<c04884ba>] ? trace_hardirqs_on_caller+0x5a/0x170 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<f8d618ac>] __ieee80211_tx+0x5c/0x1e0 [mac80211] [<f8d631fc>] ieee80211_tx+0xbc/0xe0 [mac80211] [<f8d63163>] ? ieee80211_tx+0x23/0xe0 [mac80211] [<f8d632e1>] ieee80211_xmit+0xc1/0x200 [mac80211] [<f8d63220>] ? ieee80211_tx+0xe0/0xe0 [mac80211] [<c0487d45>] ? lock_release_holdtime+0x35/0x1b0 [<f8d63986>] ? ieee80211_subif_start_xmit+0x446/0x5f0 [mac80211] [<f8d637dd>] ieee80211_subif_start_xmit+0x29d/0x5f0 [mac80211] [<f8d63924>] ? ieee80211_subif_start_xmit+0x3e4/0x5f0 [mac80211] [<c0760188>] ? sock_setsockopt+0x6a8/0x6f0 [<c0760000>] ? sock_setsockopt+0x520/0x6f0 [<c076daef>] dev_hard_start_xmit+0x2ef/0x650 Oops might happen because we perform parallel putting new entries in a queue (rt2x00queue_write_tx_frame()) and removing entries after finishing transmitting (rt2800usb_work_txdone()). There are cases when _txdone may process an entry that was not fully send and nullify entry->skb . To fix check in _txdone if entry has flags that indicate pending transmission and wait until flags get cleared. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: do not drop usb dev reference counter on suspendStanislaw Gruszka2011-10-031-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 543cc38c8fe86deba4169977c61eb88491036837 upstream. When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle. BUG: unable to handle kernel paging request at 6b6b6b9f IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30 *pdpt = 0000000034f21001 *pde = 0000000000000000 Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1 EIP is at driver_sysfs_remove+0x10/0x30 EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000) Call Trace: [<c06909ef>] __device_release_driver+0x1f/0xa0 [<c0690b20>] device_release_driver+0x20/0x40 [<c068fd64>] bus_remove_device+0x84/0xe0 [<c068e12a>] ? device_remove_attrs+0x2a/0x80 [<c068e267>] device_del+0xe7/0x170 [<c06d93d4>] usb_disconnect+0xd4/0x180 [<c06d9d61>] hub_thread+0x691/0x1600 [<c0473260>] ? wake_up_bit+0x30/0x30 [<c0442a39>] ? complete+0x49/0x60 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c0472eb4>] kthread+0x74/0x80 [<c0472e40>] ? kthread_worker_fn+0x150/0x150 [<c0809b3e>] kernel_thread_helper+0x6/0x10 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC addressSenthil Balasubramanian2011-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | commit b503c7a273c0a3018ad11ea8c513c639120afbf4 upstream. Due to some recent optimization done in the way the mac address bytes are written into the OTP memory, some AR9485 chipsets were forced to use the first byte from the eeprom template and the remaining bytes are read from OTP. AR9485 happens to use generic eeprom template which has 0x1 as the first byte causes issues in bringing up the card. So fixed the eeprom template accordingly to address the issue. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlockAlexey Khoroshilov2011-10-031-1/+3
| | | | | | | | | | | | | | | | | | | commit 66cb54bd24086b2d871a03035de9b0e79b2b725e upstream. If is_main_vif(ar, vif) reports that we have to fall back to software encryption, we goto err_softw; before locking ar->mutex. As a result, we have unprotected call to carl9170_set_operating_mode and unmatched mutex_unlock. The patch fix the issue by adding mutex_lock before goto. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-By: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k: Fix PS wrappers in ath9k_set_coverage_classMohammed Shafi Shajakhan2011-10-031-0/+4
| | | | | | | | | | | | | | commit 8b2a3827bb12430d932cd479b22d906baf08c212 upstream. this callback is called during suspend/resume and also via iw command. it configures parameters like sifs, slottime, acktimeout in ath9k_hw_init_global_settings where few REG_READ, REG_RMW are also done and hence the need for PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: fix order of entry flags modificationStanislaw Gruszka2011-08-291-10/+7
| | | | | | | | | | | | | | | | | | | | | commit df71c9cfceea801e7e26e2c74241758ef9c042e5 upstream. In rt2800usb_work_txdone we check flags in order: - ENTRY_OWNER_DEVICE_DATA - ENTRY_DATA_STATUS_PENDING - ENTRY_DATA_IO_FAILED Modify flags in separate order in rt2x00usb_interrupt_txdone, to avoid processing entries in _txdone with wrong flags or skip processing ready entries. Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath5k: fix error handling in ath5k_beacon_sendBob Copeland2011-08-171-9/+14
| | | | | | | | | | | | | | | | | | commit bdc71bc59231f5542af13b5061b9ab124d093050 upstream. This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k: fix a misprint which leads to incorrect calibrationAlex Hacker2011-08-151-1/+1
| | | | | | | | | | | | commit 118c9db51e7acaf8f16deae8311cce6588b83e31 upstream. This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Signed-off-by: Alex Hacker <hacker@epn.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix incorrect Tx control power in AR9003 templateRajkumar Manoharan2011-08-151-3/+3
| | | | | | | | | | | | | | | commit 15052f81d255eac44e745bc630b36aa86779ad9d upstream. CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlagn: 5000 do not support idle modeWey-Yi Guy2011-08-153-1/+5
| | | | | | | | | | | | | | | | | | | | | | | commit f35291082294ca6737953bbe4e9491ede04ab822 upstream. 5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Reported-by: Devin J. Pohly <djpohly+iwl@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Devin J. Pohly <djpohly+iwl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* net: Audit drivers to identify those needing IFF_TX_SKB_SHARING clearedNeil Horman2011-08-152-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 550fd08c2cebad61c548def135f67aba284c6162 ] After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabledStanislaw Gruszka2011-08-155-13/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d4930086bdd0c08a8b3a4d66a9c702297cb74a99 upstream. We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias <camilo@mesias.co.uk> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k: initialize tx chainmask before testing channel tx power valuesFelix Fietkau2011-08-151-0/+2
| | | | | | | | | | | | commit c1227340ca65c2069222a956a68b6842d460c4f4 upstream. With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* iwlegacy: set tx power after rxon_assocStanislaw Gruszka2011-08-152-3/+11
| | | | | | | | | | | | | | | | commit 17e859a899712d16c3e70b045d61ad9e02c53f8a upstream. If settings of tx power was deferred during scan or changing channel we have to setup them during commit rxon. Fix problem on 3945 (4965 already has this fix). Optimize code to apply tx settings only when tx power was actually changed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtlwifi: Fix kernel oops on ARM SOCLarry Finger2011-08-151-9/+11
| | | | | | | | | | | | | | | | | | | | | | commit b6b67df3f24c45af0012ee3c8af2f62ca083ae18 upstream. This driver uses information from the self member of the pci_bus struct to get information regarding the bridge to which the PCIe device is attached. Unfortunately, this member is not established on all architectures, which leads to a kernel oops. Skipping the entire block that uses the self member to determine the bridge vendor will only affect RTL8192DE devices as that driver sets the ASPM support flag differently when the bridge vendor is Intel. If the self member is available, there is no functional change. This patch fixes Bugzilla No. 40212. Reported-by: Hubert Liao <liao.hubertt@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: fix usage of NULL queueStanislaw Gruszka2011-08-151-2/+3
| | | | | | | | | | | | | | | commit 00898a47269ae5e6dda04defad00234b96692d95 upstream. We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe778412b36791b7897cfa139342906fbbf07b "rt2x00: Fix stuck queue in tx failure case" . Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: rt2800: fix zeroing skb structureStanislaw Gruszka2011-08-151-2/+1
| | | | | | | | | | | | | | | commit b52398b6e4522176dd125722c72c301015d24520 upstream. We should clear skb->data not skb itself. Bug was introduced by: commit 0b8004aa12d13ec750d102ba4082a95f0107c649 "rt2x00: Properly reserve room for descriptors in skbs". Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rt2x00: Add device ID for RT539F device.Gertjan van Wingerde2011-08-041-0/+1
| | | | | | | | | | | commit 71e0b38c2914018b01f3f08b43ee9e3328197699 upstream. Reported-by: Wim Vander Schelden <wim@fixnum.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* rtlwifi: rtl8192cu: Fix duplicate if testLarry Finger2011-08-041-1/+1
| | | | | | | | | | | | | | commit 1288aa4e80145d9f4196df32f717b4c1cf6aab61 upstream. A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the same condition twice. The problem was found using cppcheck-1.49, and the proper fix was verified against the pre-mac80211 version of the code. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ath9k_hw: Fix incorrect key_miss handlingSenthil Balasubramanian2011-08-042-4/+2
| | | | | | | | | | | | | | | | | | | | | | commit 0472ade031b5c0c69c21cf96acf64c50eb9ba3c2 upstream. Decryping frames on key_miss handling shouldn't be done for Michael MIC failed frames as h/w would have already decrypted such frames successfully anyway. Also leaving CRC and PHY error(where the frame is going to be dropped anyway), we are left to prcoess Decrypt error for which s/w decrypt is selected anway and so having key_miss as a separate check doesn't serve anything. So making key_miss handling mutually exlusive with other RX status handling makes much more sense. This patch addresses an issue with STA not reporting MIC failure events resulting in STA being disconnected immediately. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2011-07-135-6/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) slip: fix wrong SLIP6 ifdef-endif placing natsemi: fix another dma-debug report sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket net: Fix default in docs for tcp_orphan_retries. hso: fix a use after free condition net/natsemi: Fix module parameter permissions XFRM: Fix memory leak in xfrm_state_update sctp: Enforce retransmission limit during shutdown mac80211: fix TKIP replay vulnerability mac80211: fix ie memory allocation for scheduled scans ssb: fix init regression of hostmode PCI core rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M ath9k: Fix tx throughput drops for AR9003 chips with AES encryption carl9170: add NEC WL300NU-AG usbid cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex ath5k: fix incorrect use of drvdata in PCI suspend/resume code ath5k: fix incorrect use of drvdata in sysfs code Bluetooth: Fix memory leak under page timeouts Bluetooth: Fix regression with incoming L2CAP connections Bluetooth: Fix hidp disconnect deadlocks and lost wakeup ...
| * Merge branch 'master' of ↵John W. Linville2011-07-085-6/+16
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
| | * rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000MYoann DI-RUZZA2011-07-051-0/+1
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yoann DI-RUZZA <y.diruzza@lim.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: Fix tx throughput drops for AR9003 chips with AES encryptionRajkumar Manoharan2011-07-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While sending aggregated frames in AES, the AR5416 chips required additional padding b/w subframes. This workaround is not needed for edma (AR9003 family) chips. With this patch ~4Mbps thoughput improvement was observed in clear environment. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * carl9170: add NEC WL300NU-AG usbidChristian Lamparter2011-07-051-0/+2
| | | | | | | | | | | | | | | | | | | | | Cc: stable@kernel.org Reported-by: Mark Davis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath5k: fix incorrect use of drvdata in PCI suspend/resume codePavel Roskin2011-07-051-2/+5
| | | | | | | | | | | | | | | | | | Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath5k: fix incorrect use of drvdata in sysfs codePavel Roskin2011-07-051-3/+6
| | | | | | | | | | | | | | | | | | Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.1 at 2025-02-13 22:02:00 +0000