aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci-acpi.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI supportRafael J. Wysocki2009-09-091-2/+24
| | | | | | | | | | | | | | | | | | | | | Some PCI devices (not PCI Express), like PCI add-on cards, can generate PME#, but they don't have any special platform wake-up support. For this reason, even if they generate PME# to wake up the system from a sleep state, wake-up events are not generated by the platform. It turns out that, at least on some systems, PCI bridges and the PCI host bridge have ACPI GPEs associated with them that, if enabled to generate wake-up events, allow the system to wake up if one of the add-on devices asserts PME# while the system is in a sleep state. Following this observation, if a PCI device without direct ACPI wake-up support is prepared to wake up the system during a transition into a sleep state (eg. suspend to RAM), try to configure the bridges on the path from the device to the root bridge to wake-up the system. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI / ACPI PM: Rework some debug messagesRafael J. Wysocki2009-09-091-11/+2
| | | | | | | | | | Move a debug message from acpi_pci_sleep_wake() to acpi_pm_device_sleep_wake() and use the standard dev_*() macros in there. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Simplify PCI wake-up codeRafael J. Wysocki2009-09-091-3/+7
| | | | | | | | | Rework the PCI wake-up code so that it's easier to read without changing the functionality. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linus' into releaseLen Brown2009-04-051-215/+0
|\ | | | | | | | | | | | | Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
| * PCI/ACPI: move _OSC code to pci_root.cKenji Kaneshige2009-03-191-215/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move PCI _OSC management code from drivers/pci/pci-acpi.c to drivers/acpi/pci_root.c. The benefits are - We no longer need struct osc_data and its management code (contents are moved to struct acpi_pci_root). This simplify the code, and we no longer care about kmalloc() failure. - We can make pci_acpi_osc_support() be a static function, which is called only from drivers/acpi/pci_root.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ACPICA: Update FADT flag definitionsBob Moore2009-03-261-2/+2
|/ | | | | | | | | Add new flags in the Boot Architecture flags field. Update comments for all FADT flags. Add FADT version when each flag was defined. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linus' into releaseLen Brown2009-01-091-44/+38
|\
| * pci-acpi: Cleanup _OSC evaluation codeTaku Izumi2009-01-071-17/+14
| | | | | | | | | | | | | | | | | | | | | | Cleanup _OSC evaluation code. Some whitespace changes and a few other minor cleanups. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI/ACPI: Remove unnecessary _OSC evaluation for control requestTaku Izumi2009-01-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | If a control had already been granted, we don't need to re-evaluate _OSC for it because firmware may not reject control of any feature it has previously granted control to. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: revert additional _OSC evaluationTaku Izumi2009-01-071-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reverts adf411b819adc9fa96e9b3e638c7480d5e71d270. The commit adf411b819adc9fa96e9b3e638c7480d5e71d270 was based on the improper assumption that queried result was not updated when _OSC support field was changed. But, in fact, queried result is updated whenever _OSC support field was changed through __acpi_query_osc(). As a result, the commit adf411b819adc9fa96e9b3e638c7480d5e71d270 only introduced unnecessary additional _OSC evaluation... Tested-by: Andrew Patterson <andrew.patterson@hp.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * ACPI/PCI: remove obsolete _OSC capability support functionsAndrew Patterson2009-01-071-25/+0
| | | | | | | | | | | | | | | | | | | | | | The acpi_query_osc, __pci_osc_support_set, pci_osc_support_set, and pcie_osc_support_set functions have been obsoleted in favor of setting these capabilities during root bridge discovery with pci_acpi_osc_support. There are no longer any callers of these functions, so remove them. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * ACPI/PCI: call _OSC support during root bridge discoveryAndrew Patterson2009-01-071-5/+19
| | | | | | | | | | | | | | | | | | | | Add pci_acpi_osc_support() and call it when a PCI bridge is added. This allows us to avoid having every individual PCI root bridge driver call _OSC support for every root bridge in their probe functions, a significant savings in boot time. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | ACPI: remove private acpica headers from driver filesLin Ming2008-12-311-2/+0
|/ | | | | | | External driver files should not include any private acpica headers. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI: ignore bit0 of _OSC return codeKenji Kaneshige2008-11-111-7/+8
| | | | | | | | | | | | | | | | | | | | Currently acpi_run_osc() checks all the bits in _OSC result code (the first DWORD in the capabilities buffer) to see error condition. But the bit 0, which doesn't indicate any error, must be ignored. The bit 0 is used as the query flag at _OSC invocation time. Some platforms clear it during _OSC evaluation, but the others don't. On latter platforms, current acpi_run_osc() mis-detects error when _OSC is evaluated with query flag set because it doesn't ignore the bit 0. Because of this, the __acpi_query_osc() always fails on such platforms. And this is the cause of the problem that pci_osc_control_set() doesn't work since the commit 4e39432f4df544d3dfe4fc90a22d87de64d15815 which changed pci_osc_control_set() to use __acpi_query_osc(). Tested-by:"Tomasz Czernecki <czernecki@gmail.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI: Oops in ACPI with git latestRafael J. Wysocki2008-10-251-0/+3
| | | | | | | | | | | | ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926] ACPI Warning (nspredef-0252): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, expected 4 [20080926] ACPI Error (nspredef-0163): \_SB_.PCI0._OSC: Missing expected return value [20080926] BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<c0237671>] acpi_run_osc+0xa1/0x170 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI/PCI: Fix return value of acpi_cuery_osc()Taku Izumi2008-10-221-4/+3
| | | | | | | | | | | | If acpi_query_osc() returns other than AE_OK, __pci_osc_support_set() stops scanning ACPI objects to evaluate _OSC. This prevents subsequent _OSCs from being evaluated if some of root bridge doesn't have _OSC, for example. So acpi_query_osc() should return always AE_OK to evaluate all _OSC. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: Always query _OSC control field in pci_osc_control_set()Taku Izumi2008-10-221-18/+13
| | | | | | | | | | | | | | | In current pci_osc_control_set() implementation, once the _OSC control field is queried, it is never queried again. But the query result can change depending on the _OSC support field. For example, if PCI Express Native Hot Plug control depends on ASPM support on a certain platform, a PCI Express Native Hot Plug Control query would fail before the ASPM driver was loaded, but it would succeed if the ASPM driver was loaded first. Therefore, pci_osc_control_set() should query the _OSC control field every time. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: Change pci_osc_control_set() to query control bits firstTaku Izumi2008-10-221-16/+31
| | | | | | | | | | | | | | Current pci_osc_control_set() evaluates _OSC without query for control bits, unless __pci_osc_support_set() is called beforehand. But as strongly recommended in PCI firmware specification, it should query control bits first. This patch changes pci_osc_control_set() to query control bits first even if __pci_osc_support_set() is not called beforehand. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: Fix possible race condition on _OSC evaluationTaku Izumi2008-10-221-8/+20
| | | | | | | | | | | | Fix possible race condition on _OSC evaluation. Current _OSC evaluation code has possible race condition because it maniputes osc_data linked list or its contents without any lock mechanism. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: disable ASPM per ACPI FADT settingShaohua Li2008-07-281-0/+7
| | | | | | | | | | The ACPI FADT table includes an ASPM control bit. If the bit is set, do not enable ASPM since it may indicate that the platform doesn't actually support the feature. Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ACPI: Rework PCI handling of wake-upRafael J. Wysocki2008-07-071-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: rework pci_set_power_state function to call platform firstRafael J. Wysocki2008-07-071-6/+10
| | | | | | | | | | | | | | | | Rework pci_set_power_state() so that the platform callback is invoked before the native mechanism, if necessary. Also, make the function check if the device is power manageable by the platform before invoking the platform callback. This may matter if the device dependent on additional power resources controlled by the platform is being put into D0, in which case those power resources must be turned on before we attempt to handle the device itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Introduce platform_pci_power_manageable functionRafael J. Wysocki2008-07-071-6/+13
| | | | | | | | | | | Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'suspend' of ↵Jesse Barnes2008-06-121-4/+2
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
| * PCI ACPI: Drop the second argument of platform_pci_choose_stateRafael J. Wysocki2008-06-111-2/+1
| | | | | | | | | | | | | | | | | | Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI PM: acpi_pm_device_sleep_state() cleanupDavid Brownell2008-06-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | pci-acpi: formatting cleanups for _OSCKenji Kaneshige2008-06-101-2/+3
| | | | | | | | | | | | | | | | Minor cleanup in pci-acpi.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | pci-acpi: remove unused variable in __pci_osc_support_setKenji Kaneshige2008-06-101-11/+4
| | | | | | | | | | | | | | | | | | The 'retval' variable in __pci_osc_support_set() is no longer used. Remove this unused variable. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | pci-acpi: add flag to indicate query had been doneKenji Kaneshige2008-06-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | Current pci-acpi implementation checks osc_data->support_stat to see if control bits had been already queried. It is not good from the viewpoint of easy understanding. So this patch adds new 'is_queried' flag to indicate query had been done. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | pci-acpi: use local buffer for _OSCKenji Kaneshige2008-06-101-34/+39
| | | | | | | | | | | | | | | | | | | | | | Current pci-acpi implementation uses array in osc_data directly to evaluate _OSC. It needs to save the old data and restore it if _OSC evaluation fails. To make it more robust, we should use local array to evaluate _OSC. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | pci-acpi: remove duplicate code for _OSCKenji Kaneshige2008-06-101-110/+55
|/ | | | | | | | | Remove the duplicated code in acpi_query_osc() and acpi_run_osc(). It simplifies the code very much. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: another multiple _OSC memory leak fixKenji Kaneshige2008-05-131-1/+7
| | | | | | | | | | The acpi_query_osc() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data() in acpi_query_osc(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: handle multiple _OSCKenji Kaneshige2008-05-131-1/+7
| | | | | | | | | | | The pci_osc_control_set() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data(). Here is a patch to fix this problem in pci_osc_control_set. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: handle multiple _OSCShaohua Li2008-05-131-29/+66
| | | | | | | | | | There is an IA64 system here which have two pci root bridges with _OSC. One _OSC disables SHPC control bit but the other not. Below patch makes _OSC data per-device instead of one global, otherwise linux takes both root bridges don't support SHPC. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI ACPI: fix uninitialized variable in __pci_osc_support_setKenji Kaneshige2008-05-131-1/+1
| | | | | | | | | | | | | | | Fix uninitialized variable in __pci_osc_support_set(). If the ACPI namespace doesn't have any device object corresponding to the specified hid, 'retval' in __pci_osc_support_set() is not changed by the acpi_query_osc() callback. Since 'retval' is not initizlized in the current implementation, the contents of 'retval' is undefined in this case. This causes a mis-handling of ctrlset_buf[OSC_SUPPORT_TYPE] and will cause an unexpected result in the subsequent pci_osc_control_set() call as a result. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI: acpi_pci_set_power_state() cleanupsDavid Brownell2008-02-231-8/+16
| | | | | | | | | | Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Len Brown <len.brown@intel.com>
*-. Merge branches 'release', 'bugzilla-9916', 'bugzilla-9982', 'bugzilla-9989', ↵Len Brown2008-02-211-2/+1
|\ \ | | | | | | | | | 'misc', 'suspend', 'thermal', 'thinkpad' and 'tsc' into release
| | * PCI ACPI: Fix comment describing acpi_pci_choose_stateRafael J. Wysocki2008-02-211-2/+0
| |/ |/| | | | | | | | | | | | | | | The last line of the comment preceding the definition of acpi_pci_choose_state() is incorrect. Remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
| * kernel-doc: fix pci-acpi warningRandy Dunlap2008-02-151-0/+1
|/ | | | | | | | Fix PCI kernel-doc warning: Warning(linux-2.6.24-git12//drivers/pci/pci-acpi.c:166): No description found for parameter 'hid' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI ACPI: Added a function to register _OSC with only PCIe devices.Andrew Patterson2008-02-011-3/+3
| | | | | | | | | | | | | | The function pci_osc_support_set() traverses every root bridge when checking for _OSC support for a capability. It quits as soon as it finds a device/bridge that doesn't support the requested capability. This won't work for systems that have mixed PCI and PCIe bridges when checking for PCIe features. I split this function into two -- pci_osc_support_set() and pcie_osc_support_set(). The latter is used when only PCIe devices should be traversed. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: drivers/pci/: remove unused exportsAdrian Bunk2008-02-011-1/+0
| | | | | | | | | | | | | | | This patch removes the following unused exports: - remove the following unused EXPORT_SYMBOL's: - pci-acpi.c: pci_osc_support_set - proc.c: pci_proc_detach_bus - remove the following unused EXPORT_SYMBOL_GPL's: - bus.c: pci_walk_bus - probe.c: pci_create_bus - setup-res.c: pci_claim_resource Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ACPI: restore CONFIG_ACPI_SLEEPLen Brown2007-07-291-0/+4
| | | | | | | | | Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: Len Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPI: ignore _PSx method for hotplugable PCI devicesShaohua Li2007-07-221-0/+4
| | | | | | | | | If the ACPI device has _EJ0, ignore the device. _PSx will set power for the slot, and the hotplug driver will take care of _PSx. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: Use ACPI methods to select PCI device suspend stateShaohua Li2007-07-221-4/+20
| | | | | | | | applied after Rafel's 'PM: Update global suspend and hibernation operations framework' patch set Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* PCI: fix AER driver error informationZhang, Yanmin2007-07-111-6/+2
| | | | | | | | | | | | | | | | | | | | Below patch fixes aer driver error information and enables aer driver although CONFIG_ACPI=n. As a matter of fact, the new patch is created from below 2 patches plus a minor patch apply fuzz fixing. Because the second patch fixed a compilation error introduced by the first patch, I merge them to facilitate bisect. 1) http://marc.info/?l=linux-kernel&m=117783233918191&w=2; 2) http://marc.info/?l=linux-mm-commits&m=118046936720790&w=2 Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ACPI: Disable MSI on request of FADTShaohua Li2007-04-251-0/+4
| | | | | | | | The ACPI spec defines the bit and Microsoft uses it, so Linux must use it too. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* pci: clear osc support flags if no _OSC methodKristen Carlson Accardi2006-12-011-1/+9
| | | | | | | | | | | | | | | | | | | | | So it looks like pci aer code will call pci_osc_support_set to tell the firmware about OSC_EXT_PCI_CONFIG_SUPPORT flag. that causes ctrlset_buf[OSC_SUPPORT_TYPE] to evaluate to true when pciehp calls pci_osc_control_set() is called (to attempt to use OSC to gain native pcie control from firmware), regardless of whether or not _OSC was actually successfully executed. That causes this section of code: if (ctrlset_buf[OSC_SUPPORT_TYPE] && ((global_ctrlsets & ctrlset) != ctrlset)) { return AE_SUPPORT; } to be hit. This patch will reset the OSC_SUPPORT_TYPE field if _OSC fails, and then would allow pciehp to go ahead and try to run _OSC again. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI ACPI: Rename the functions to avoid multiple instances.Muthu Kumar2006-06-211-8/+8
| | | | | | | | | | There were two instances of pci_acpi_init(), one in drivers/pci/pci-acpi.c and another in arch/i386/pci/acpi.c. Rename the one in pci-acpi.c and make it consistent with other names in the same file. Signed-off-by: Muthukumar R <muthur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pci: correctly allocate return buffers for osc callsKristen Accardi2006-05-211-25/+35
| | | | | | | | | | | | | | | | | | The OSC set and query functions do not allocate enough space for return values, and set the output buffer length to a false, too large value. This causes the acpi-ca code to assume that the output buffer is larger than it actually is, and overwrite memory when copying acpi return buffers into this caller provided buffer. In some cases this can cause kernel oops if the memory that is overwritten is a pointer. This patch will change these calls to use a dynamically allocated output buffer, thus allowing the acpi-ca code to decide how much space is needed. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.1 at 2024-12-26 23:50:02 +0000