From 0da2f50944976e890ccc9436ab88c0da87788d02 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: ide: remove unnecessary blk_queue_flushing() test in do_ide_request() Unplugging from a request function doesn't really help much (it's already in the request_fn) and soon block layer will be updated to mix barrier sequence with other commands, so there's no need to treat queue flushing any differently. ide was the only user of blk_queue_flushing(). Remove it. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Acked-by: David S. Miller Signed-off-by: Jens Axboe --- drivers/ide/ide-io.c | 13 ------------- include/linux/blkdev.h | 1 - 2 files changed, 14 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a381be8..999dac0 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -441,19 +441,6 @@ void do_ide_request(struct request_queue *q) struct request *rq = NULL; ide_startstop_t startstop; - /* - * drive is doing pre-flush, ordered write, post-flush sequence. even - * though that is 3 requests, it must be seen as a single transaction. - * we must not preempt this drive until that is complete - */ - if (blk_queue_flushing(q)) - /* - * small race where queue could get replugged during - * the 3-request flush cycle, just yank the plug since - * we want it to finish asap - */ - blk_remove_plug(q); - spin_unlock_irq(q->queue_lock); /* HLD do_request() callback might sleep, make sure it's okay */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c54906..015375c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -521,7 +521,6 @@ enum { #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) -#define blk_queue_flushing(q) ((q)->ordseq) #define blk_queue_stackable(q) \ test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags) #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags) -- cgit v1.1 From 589d7ed02ade0d06a3510da2e15a7edfdb2ef3d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block/loop: queue ordered mode should be DRAIN_FLUSH loop implements FLUSH using fsync but was incorrectly setting its ordered mode to DRAIN. Change it to DRAIN_FLUSH. In practice, this doesn't change anything as loop doesn't make use of the block layer ordered implementation. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index f3c636d..c3a4a2e 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -832,7 +832,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, lo->lo_queue->unplug_fn = loop_unplug; if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync) - blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN); + blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN_FLUSH); set_capacity(lo->lo_disk, size); bd_set_size(bdev, size << 9); -- cgit v1.1 From 6958f145459ca7ad9715024de97445addacb8510 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: kill QUEUE_ORDERED_BY_TAG Nobody is making meaningful use of ORDERED_BY_TAG now and queue draining for barrier requests will be removed soon which will render the advantage of tag ordering moot. Kill ORDERED_BY_TAG. The following users are affected. * brd: converted to ORDERED_DRAIN. * virtio_blk: ORDERED_TAG path was already marked deprecated. Removed. * xen-blkfront: ORDERED_TAG case dropped. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Cc: Nick Piggin Cc: Michael S. Tsirkin Cc: Jeremy Fitzhardinge Cc: Chris Wright Signed-off-by: Jens Axboe --- block/blk-barrier.c | 35 +++++++---------------------------- drivers/block/brd.c | 2 +- drivers/block/virtio_blk.c | 9 --------- drivers/block/xen-blkfront.c | 8 +++----- drivers/scsi/sd.c | 4 +--- include/linux/blkdev.h | 17 +---------------- 6 files changed, 13 insertions(+), 62 deletions(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index f0faefc..c807e9c 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -26,10 +26,7 @@ int blk_queue_ordered(struct request_queue *q, unsigned ordered) if (ordered != QUEUE_ORDERED_NONE && ordered != QUEUE_ORDERED_DRAIN && ordered != QUEUE_ORDERED_DRAIN_FLUSH && - ordered != QUEUE_ORDERED_DRAIN_FUA && - ordered != QUEUE_ORDERED_TAG && - ordered != QUEUE_ORDERED_TAG_FLUSH && - ordered != QUEUE_ORDERED_TAG_FUA) { + ordered != QUEUE_ORDERED_DRAIN_FUA) { printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered); return -EINVAL; } @@ -155,21 +152,9 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp) * For an empty barrier, there's no actual BAR request, which * in turn makes POSTFLUSH unnecessary. Mask them off. */ - if (!blk_rq_sectors(rq)) { + if (!blk_rq_sectors(rq)) q->ordered &= ~(QUEUE_ORDERED_DO_BAR | QUEUE_ORDERED_DO_POSTFLUSH); - /* - * Empty barrier on a write-through device w/ ordered - * tag has no command to issue and without any command - * to issue, ordering by tag can't be used. Drain - * instead. - */ - if ((q->ordered & QUEUE_ORDERED_BY_TAG) && - !(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) { - q->ordered &= ~QUEUE_ORDERED_BY_TAG; - q->ordered |= QUEUE_ORDERED_BY_DRAIN; - } - } /* stash away the original request */ blk_dequeue_request(rq); @@ -210,7 +195,7 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp) } else skip |= QUEUE_ORDSEQ_PREFLUSH; - if ((q->ordered & QUEUE_ORDERED_BY_DRAIN) && queue_in_flight(q)) + if (queue_in_flight(q)) rq = NULL; else skip |= QUEUE_ORDSEQ_DRAIN; @@ -257,16 +242,10 @@ bool blk_do_ordered(struct request_queue *q, struct request **rqp) rq != &q->pre_flush_rq && rq != &q->post_flush_rq) return true; - if (q->ordered & QUEUE_ORDERED_BY_TAG) { - /* Ordered by tag. Blocking the next barrier is enough. */ - if (is_barrier && rq != &q->bar_rq) - *rqp = NULL; - } else { - /* Ordered by draining. Wait for turn. */ - WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q)); - if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q)) - *rqp = NULL; - } + /* Ordered by draining. Wait for turn. */ + WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q)); + if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q)) + *rqp = NULL; return true; } diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 1c7f637..47a4127 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -482,7 +482,7 @@ static struct brd_device *brd_alloc(int i) if (!brd->brd_queue) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); - blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG); + blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_DRAIN); blk_queue_max_hw_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 2aafafc..7965280 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -395,15 +395,6 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) * to implement write barrier support. */ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH); - } else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) { - /* - * If the BARRIER feature is supported the host expects us - * to order request by tags. This implies there is not - * volatile write cache on the host, and that the host - * never re-orders outstanding I/O. This feature is not - * useful for real life scenarious and deprecated. - */ - blk_queue_ordered(q, QUEUE_ORDERED_TAG); } else { /* * If the FLUSH feature is not supported we must assume that diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index ac1b682..50ec6f8 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -424,8 +424,7 @@ static int xlvbd_barrier(struct blkfront_info *info) const char *barrier; switch (info->feature_barrier) { - case QUEUE_ORDERED_DRAIN: barrier = "enabled (drain)"; break; - case QUEUE_ORDERED_TAG: barrier = "enabled (tag)"; break; + case QUEUE_ORDERED_DRAIN: barrier = "enabled"; break; case QUEUE_ORDERED_NONE: barrier = "disabled"; break; default: return -EINVAL; } @@ -1078,8 +1077,7 @@ static void blkfront_connect(struct blkfront_info *info) * we're dealing with a very old backend which writes * synchronously; draining will do what needs to get done. * - * If there are barriers, then we can do full queued writes - * with tagged barriers. + * If there are barriers, then we use flush. * * If barriers are not supported, then there's no much we can * do, so just set ordering to NONE. @@ -1087,7 +1085,7 @@ static void blkfront_connect(struct blkfront_info *info) if (err) info->feature_barrier = QUEUE_ORDERED_DRAIN; else if (barrier) - info->feature_barrier = QUEUE_ORDERED_TAG; + info->feature_barrier = QUEUE_ORDERED_DRAIN_FLUSH; else info->feature_barrier = QUEUE_ORDERED_NONE; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 2714bec..cdfc51a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2151,9 +2151,7 @@ static int sd_revalidate_disk(struct gendisk *disk) /* * We now have all cache related info, determine how we deal - * with ordered requests. Note that as the current SCSI - * dispatch function can alter request order, we cannot use - * QUEUE_ORDERED_TAG_* even when ordered tag is supported. + * with ordered requests. */ if (sdkp->WCE) ordered = sdkp->DPOFUA diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 015375c..7077bc0 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -470,12 +470,7 @@ enum { * DRAIN : ordering by draining is enough * DRAIN_FLUSH : ordering by draining w/ pre and post flushes * DRAIN_FUA : ordering by draining w/ pre flush and FUA write - * TAG : ordering by tag is enough - * TAG_FLUSH : ordering by tag w/ pre and post flushes - * TAG_FUA : ordering by tag w/ pre flush and FUA write */ - QUEUE_ORDERED_BY_DRAIN = 0x01, - QUEUE_ORDERED_BY_TAG = 0x02, QUEUE_ORDERED_DO_PREFLUSH = 0x10, QUEUE_ORDERED_DO_BAR = 0x20, QUEUE_ORDERED_DO_POSTFLUSH = 0x40, @@ -483,8 +478,7 @@ enum { QUEUE_ORDERED_NONE = 0x00, - QUEUE_ORDERED_DRAIN = QUEUE_ORDERED_BY_DRAIN | - QUEUE_ORDERED_DO_BAR, + QUEUE_ORDERED_DRAIN = QUEUE_ORDERED_DO_BAR, QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN | QUEUE_ORDERED_DO_PREFLUSH | QUEUE_ORDERED_DO_POSTFLUSH, @@ -492,15 +486,6 @@ enum { QUEUE_ORDERED_DO_PREFLUSH | QUEUE_ORDERED_DO_FUA, - QUEUE_ORDERED_TAG = QUEUE_ORDERED_BY_TAG | - QUEUE_ORDERED_DO_BAR, - QUEUE_ORDERED_TAG_FLUSH = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_POSTFLUSH, - QUEUE_ORDERED_TAG_FUA = QUEUE_ORDERED_TAG | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_FUA, - /* * Ordered operation sequence */ -- cgit v1.1 From 4913efe456c987057e5d36a3f0a55422a9072cae Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush() Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with -EOPNOTSUPP and blk_queue_ordered() is replaced with simpler blk_queue_flush(). blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a device has write cache and can flush it, it should set REQ_FLUSH. If the device can handle FUA writes, it should also set REQ_FUA. All blk_queue_ordered() users are converted. * ORDERED_DRAIN is mapped to 0 which is the default value. * ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH. * ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA. Signed-off-by: Tejun Heo Acked-by: Boaz Harrosh Cc: Christoph Hellwig Cc: Nick Piggin Cc: Michael S. Tsirkin Cc: Jeremy Fitzhardinge Cc: Chris Wright Cc: FUJITA Tomonori Cc: Geert Uytterhoeven Cc: David S. Miller Cc: Alasdair G Kergon Cc: Pierre Ossman Cc: Stefan Weinhuber Signed-off-by: Jens Axboe --- block/blk-barrier.c | 29 ----------------------------- block/blk-core.c | 6 ++++-- block/blk-settings.c | 20 ++++++++++++++++++++ drivers/block/brd.c | 1 - drivers/block/loop.c | 2 +- drivers/block/osdblk.c | 2 +- drivers/block/ps3disk.c | 2 +- drivers/block/virtio_blk.c | 25 +++++++++---------------- drivers/block/xen-blkfront.c | 43 ++++++++++++------------------------------- drivers/ide/ide-disk.c | 13 ++++++------- drivers/md/dm.c | 2 +- drivers/mmc/card/queue.c | 1 - drivers/s390/block/dasd.c | 1 - drivers/scsi/sd.c | 16 ++++++++-------- include/linux/blkdev.h | 6 ++++-- 15 files changed, 67 insertions(+), 102 deletions(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index c807e9c..ed0aba5 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -9,35 +9,6 @@ #include "blk.h" -/** - * blk_queue_ordered - does this queue support ordered writes - * @q: the request queue - * @ordered: one of QUEUE_ORDERED_* - * - * Description: - * For journalled file systems, doing ordered writes on a commit - * block instead of explicitly doing wait_on_buffer (which is bad - * for performance) can be a big win. Block drivers supporting this - * feature should call this function and indicate so. - * - **/ -int blk_queue_ordered(struct request_queue *q, unsigned ordered) -{ - if (ordered != QUEUE_ORDERED_NONE && - ordered != QUEUE_ORDERED_DRAIN && - ordered != QUEUE_ORDERED_DRAIN_FLUSH && - ordered != QUEUE_ORDERED_DRAIN_FUA) { - printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered); - return -EINVAL; - } - - q->ordered = ordered; - q->next_ordered = ordered; - - return 0; -} -EXPORT_SYMBOL(blk_queue_ordered); - /* * Cache flushing for ordered writes handling */ diff --git a/block/blk-core.c b/block/blk-core.c index ee1a1e7..f063541 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1203,11 +1203,13 @@ static int __make_request(struct request_queue *q, struct bio *bio) const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK; int rw_flags; - if ((bio->bi_rw & REQ_HARDBARRIER) && - (q->next_ordered == QUEUE_ORDERED_NONE)) { + /* REQ_HARDBARRIER is no more */ + if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER, + "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) { bio_endio(bio, -EOPNOTSUPP); return 0; } + /* * low level driver can indicate that it wants pages above a * certain limit bounced to low memory (ie for highmem, or even diff --git a/block/blk-settings.c b/block/blk-settings.c index a234f4b..9b18afc 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -794,6 +794,26 @@ void blk_queue_update_dma_alignment(struct request_queue *q, int mask) } EXPORT_SYMBOL(blk_queue_update_dma_alignment); +/** + * blk_queue_flush - configure queue's cache flush capability + * @q: the request queue for the device + * @flush: 0, REQ_FLUSH or REQ_FLUSH | REQ_FUA + * + * Tell block layer cache flush capability of @q. If it supports + * flushing, REQ_FLUSH should be set. If it supports bypassing + * write cache for individual writes, REQ_FUA should be set. + */ +void blk_queue_flush(struct request_queue *q, unsigned int flush) +{ + WARN_ON_ONCE(flush & ~(REQ_FLUSH | REQ_FUA)); + + if (WARN_ON_ONCE(!(flush & REQ_FLUSH) && (flush & REQ_FUA))) + flush &= ~REQ_FUA; + + q->flush_flags = flush & (REQ_FLUSH | REQ_FUA); +} +EXPORT_SYMBOL_GPL(blk_queue_flush); + static int __init blk_settings_init(void) { blk_max_low_pfn = max_low_pfn - 1; diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 47a4127..fa33f97 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -482,7 +482,6 @@ static struct brd_device *brd_alloc(int i) if (!brd->brd_queue) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); - blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_DRAIN); blk_queue_max_hw_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); diff --git a/drivers/block/loop.c b/drivers/block/loop.c index c3a4a2e..953d1e1 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -832,7 +832,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, lo->lo_queue->unplug_fn = loop_unplug; if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync) - blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(lo->lo_queue, REQ_FLUSH); set_capacity(lo->lo_disk, size); bd_set_size(bdev, size << 9); diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c index 2284b4f..72d6246 100644 --- a/drivers/block/osdblk.c +++ b/drivers/block/osdblk.c @@ -439,7 +439,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev) blk_queue_stack_limits(q, osd_request_queue(osdev->osd)); blk_queue_prep_rq(q, blk_queue_start_tag); - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(q, REQ_FLUSH); disk->queue = q; diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index e9da874..4911f9e 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -468,7 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev) blk_queue_dma_alignment(queue, dev->blk_size-1); blk_queue_logical_block_size(queue, dev->blk_size); - blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(queue, REQ_FLUSH); blk_queue_max_segments(queue, -1); blk_queue_max_segment_size(queue, dev->bounce_size); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 7965280..d10b635 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -388,22 +388,15 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) vblk->disk->driverfs_dev = &vdev->dev; index++; - if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) { - /* - * If the FLUSH feature is supported we do have support for - * flushing a volatile write cache on the host. Use that - * to implement write barrier support. - */ - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH); - } else { - /* - * If the FLUSH feature is not supported we must assume that - * the host does not perform any kind of volatile write - * caching. We still need to drain the queue to provider - * proper barrier semantics. - */ - blk_queue_ordered(q, QUEUE_ORDERED_DRAIN); - } + /* + * If the FLUSH feature is supported we do have support for + * flushing a volatile write cache on the host. Use that to + * implement write barrier support; otherwise, we must assume + * that the host does not perform any kind of volatile write + * caching. + */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) + blk_queue_flush(q, REQ_FLUSH); /* If disk is read-only in the host, the guest should obey */ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 50ec6f8..0b1eea6 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -95,7 +95,7 @@ struct blkfront_info struct gnttab_free_callback callback; struct blk_shadow shadow[BLK_RING_SIZE]; unsigned long shadow_free; - int feature_barrier; + unsigned int feature_flush; int is_ready; }; @@ -418,25 +418,12 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) } -static int xlvbd_barrier(struct blkfront_info *info) +static void xlvbd_flush(struct blkfront_info *info) { - int err; - const char *barrier; - - switch (info->feature_barrier) { - case QUEUE_ORDERED_DRAIN: barrier = "enabled"; break; - case QUEUE_ORDERED_NONE: barrier = "disabled"; break; - default: return -EINVAL; - } - - err = blk_queue_ordered(info->rq, info->feature_barrier); - - if (err) - return err; - + blk_queue_flush(info->rq, info->feature_flush); printk(KERN_INFO "blkfront: %s: barriers %s\n", - info->gd->disk_name, barrier); - return 0; + info->gd->disk_name, + info->feature_flush ? "enabled" : "disabled"); } @@ -515,7 +502,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity, info->rq = gd->queue; info->gd = gd; - xlvbd_barrier(info); + xlvbd_flush(info); if (vdisk_info & VDISK_READONLY) set_disk_ro(gd, 1); @@ -661,8 +648,8 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) printk(KERN_WARNING "blkfront: %s: write barrier op failed\n", info->gd->disk_name); error = -EOPNOTSUPP; - info->feature_barrier = QUEUE_ORDERED_NONE; - xlvbd_barrier(info); + info->feature_flush = 0; + xlvbd_flush(info); } /* fall through */ case BLKIF_OP_READ: @@ -1075,19 +1062,13 @@ static void blkfront_connect(struct blkfront_info *info) /* * If there's no "feature-barrier" defined, then it means * we're dealing with a very old backend which writes - * synchronously; draining will do what needs to get done. + * synchronously; nothing to do. * * If there are barriers, then we use flush. - * - * If barriers are not supported, then there's no much we can - * do, so just set ordering to NONE. */ - if (err) - info->feature_barrier = QUEUE_ORDERED_DRAIN; - else if (barrier) - info->feature_barrier = QUEUE_ORDERED_DRAIN_FLUSH; - else - info->feature_barrier = QUEUE_ORDERED_NONE; + info->feature_flush = 0; + if (!err && barrier) + info->feature_flush = REQ_FLUSH; err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size); if (err) { diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7433e07..7c5b01c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -516,10 +516,10 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect) return ide_no_data_taskfile(drive, &cmd); } -static void update_ordered(ide_drive_t *drive) +static void update_flush(ide_drive_t *drive) { u16 *id = drive->id; - unsigned ordered = QUEUE_ORDERED_NONE; + unsigned flush = 0; if (drive->dev_flags & IDE_DFLAG_WCACHE) { unsigned long long capacity; @@ -543,13 +543,12 @@ static void update_ordered(ide_drive_t *drive) drive->name, barrier ? "" : "not "); if (barrier) { - ordered = QUEUE_ORDERED_DRAIN_FLUSH; + flush = REQ_FLUSH; blk_queue_prep_rq(drive->queue, idedisk_prep_fn); } - } else - ordered = QUEUE_ORDERED_DRAIN; + } - blk_queue_ordered(drive->queue, ordered); + blk_queue_flush(drive->queue, flush); } ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE); @@ -572,7 +571,7 @@ static int set_wcache(ide_drive_t *drive, int arg) } } - update_ordered(drive); + update_flush(drive); return err; } diff --git a/drivers/md/dm.c b/drivers/md/dm.c index ac384b2..b1d92be 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2245,7 +2245,7 @@ static int dm_init_request_based_queue(struct mapped_device *md) blk_queue_softirq_done(md->queue, dm_softirq_done); blk_queue_prep_rq(md->queue, dm_prep_fn); blk_queue_lld_busy(md->queue, dm_lld_busy); - blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH); + blk_queue_flush(md->queue, REQ_FLUSH); elv_register_queue(md->queue); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index e876678..9c0b42b 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -128,7 +128,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock mq->req = NULL; blk_queue_prep_rq(mq->queue, mmc_prep_request); - blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN); queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue); if (mmc_can_erase(card)) { queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 8373ca0..9b106d8 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2197,7 +2197,6 @@ static void dasd_setup_queue(struct dasd_block *block) */ blk_queue_max_segment_size(block->request_queue, PAGE_SIZE); blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1); - blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN); } /* diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index cdfc51a..63bd01a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2109,7 +2109,7 @@ static int sd_revalidate_disk(struct gendisk *disk) struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; unsigned char *buffer; - unsigned ordered; + unsigned flush = 0; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_revalidate_disk\n")); @@ -2151,15 +2151,15 @@ static int sd_revalidate_disk(struct gendisk *disk) /* * We now have all cache related info, determine how we deal - * with ordered requests. + * with flush requests. */ - if (sdkp->WCE) - ordered = sdkp->DPOFUA - ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH; - else - ordered = QUEUE_ORDERED_DRAIN; + if (sdkp->WCE) { + flush |= REQ_FLUSH; + if (sdkp->DPOFUA) + flush |= REQ_FUA; + } - blk_queue_ordered(sdkp->disk->queue, ordered); + blk_queue_flush(sdkp->disk->queue, flush); set_capacity(disk, sdkp->capacity); kfree(buffer); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7077bc0..e97911d4 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -355,8 +355,10 @@ struct request_queue struct blk_trace *blk_trace; #endif /* - * reserved for flush operations + * for flush operations */ + unsigned int flush_flags; + unsigned int ordered, next_ordered, ordseq; int orderr, ordcolor; struct request pre_flush_rq, bar_rq, post_flush_rq; @@ -865,8 +867,8 @@ extern void blk_queue_update_dma_alignment(struct request_queue *, int); extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *); extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *); extern void blk_queue_rq_timeout(struct request_queue *, unsigned int); +extern void blk_queue_flush(struct request_queue *q, unsigned int flush); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); -extern int blk_queue_ordered(struct request_queue *, unsigned); extern bool blk_do_ordered(struct request_queue *, struct request **); extern unsigned blk_ordered_cur_seq(struct request_queue *); extern unsigned blk_ordered_req_seq(struct request *); -- cgit v1.1 From 9cbbdca44ae1a6f512ea1e2be11ced8bbb9d430a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: remove spurious uses of REQ_HARDBARRIER REQ_HARDBARRIER is deprecated. Remove spurious uses in the following users. Please note that other than osdblk, all other uses were already spurious before deprecation. * osdblk: osdblk_rq_fn() won't receive any request with REQ_HARDBARRIER set. Remove the test for it. * pktcdvd: use of REQ_HARDBARRIER in pkt_generic_packet() doesn't mean anything. Removed. * aic7xxx_old: Setting MSG_ORDERED_Q_TAG on REQ_HARDBARRIER is spurious. Removed. * sas_scsi_host: Setting TASK_ATTR_ORDERED on REQ_HARDBARRIER is spurious. Removed. * scsi_tcq: The ordered tag path wasn't being used anyway. Removed. Signed-off-by: Tejun Heo Acked-by: Boaz Harrosh Cc: James Bottomley Cc: Peter Osterlund Signed-off-by: Jens Axboe --- drivers/block/osdblk.c | 3 +-- drivers/block/pktcdvd.c | 1 - drivers/scsi/aic7xxx_old.c | 21 ++------------------- drivers/scsi/libsas/sas_scsi_host.c | 13 +------------ include/scsi/scsi_tcq.h | 6 +----- 5 files changed, 5 insertions(+), 39 deletions(-) diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c index 72d6246..87311eb 100644 --- a/drivers/block/osdblk.c +++ b/drivers/block/osdblk.c @@ -310,8 +310,7 @@ static void osdblk_rq_fn(struct request_queue *q) break; /* filter out block requests we don't understand */ - if (rq->cmd_type != REQ_TYPE_FS && - !(rq->cmd_flags & REQ_HARDBARRIER)) { + if (rq->cmd_type != REQ_TYPE_FS) { blk_end_request_all(rq, 0); continue; } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index b1cbeb5..0166ea13 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -753,7 +753,6 @@ static int pkt_generic_packet(struct pktcdvd_device *pd, struct packet_command * rq->timeout = 60*HZ; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->cmd_flags |= REQ_HARDBARRIER; if (cgc->quiet) rq->cmd_flags |= REQ_QUIET; diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 93984c9..e1cd606 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -2850,12 +2850,6 @@ aic7xxx_done(struct aic7xxx_host *p, struct aic7xxx_scb *scb) aic_dev->r_total++; ptr = aic_dev->r_bins; } - if(cmd->device->simple_tags && cmd->request->cmd_flags & REQ_HARDBARRIER) - { - aic_dev->barrier_total++; - if(scb->tag_action == MSG_ORDERED_Q_TAG) - aic_dev->ordered_total++; - } x = scb->sg_length; x >>= 10; for(i=0; i<6; i++) @@ -10144,19 +10138,8 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd, /* We always force TEST_UNIT_READY to untagged */ if (cmd->cmnd[0] != TEST_UNIT_READY && sdptr->simple_tags) { - if (req->cmd_flags & REQ_HARDBARRIER) - { - if(sdptr->ordered_tags) - { - hscb->control |= MSG_ORDERED_Q_TAG; - scb->tag_action = MSG_ORDERED_Q_TAG; - } - } - else - { - hscb->control |= MSG_SIMPLE_Q_TAG; - scb->tag_action = MSG_SIMPLE_Q_TAG; - } + hscb->control |= MSG_SIMPLE_Q_TAG; + scb->tag_action = MSG_SIMPLE_Q_TAG; } } if ( !(aic_dev->dtr_pending) && diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index f0cfba9..535085c 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -130,17 +130,6 @@ static void sas_scsi_task_done(struct sas_task *task) sc->scsi_done(sc); } -static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd) -{ - enum task_attribute ta = TASK_ATTR_SIMPLE; - if (cmd->request && blk_rq_tagged(cmd->request)) { - if (cmd->device->ordered_tags && - (cmd->request->cmd_flags & REQ_HARDBARRIER)) - ta = TASK_ATTR_ORDERED; - } - return ta; -} - static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, struct domain_device *dev, gfp_t gfp_flags) @@ -160,7 +149,7 @@ static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, task->ssp_task.retry_count = 1; int_to_scsilun(cmd->device->lun, &lun); memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8); - task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd); + task->ssp_task.task_attr = TASK_ATTR_SIMPLE; memcpy(task->ssp_task.cdb, cmd->cmnd, 16); task->scatter = scsi_sglist(cmd); diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index 1723138..d6e7994 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -97,13 +97,9 @@ static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth) static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg) { struct request *req = cmd->request; - struct scsi_device *sdev = cmd->device; if (blk_rq_tagged(req)) { - if (sdev->ordered_tags && req->cmd_flags & REQ_HARDBARRIER) - *msg++ = MSG_ORDERED_TAG; - else - *msg++ = MSG_SIMPLE_TAG; + *msg++ = MSG_SIMPLE_TAG; *msg++ = req->tag; return 2; } -- cgit v1.1 From dd831006d5be7f74c3fe7aef82380c51c3637960 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: misc cleanups in barrier code Make the following cleanups in preparation of barrier/flush update. * blk_do_ordered() declaration is moved from include/linux/blkdev.h to block/blk.h. * blk_do_ordered() now returns pointer to struct request, with %NULL meaning "try the next request" and ERR_PTR(-EAGAIN) "try again later". The third case will be dropped with further changes. * In the initialization of proxy barrier request, data direction is already set by init_request_from_bio(). Drop unnecessary explicit REQ_WRITE setting and move init_request_from_bio() above REQ_FUA flag setting. * add_request() is collapsed into __make_request(). These changes don't make any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-barrier.c | 32 ++++++++++++++------------------ block/blk-core.c | 21 ++++----------------- block/blk.h | 7 +++++-- include/linux/blkdev.h | 1 - 4 files changed, 23 insertions(+), 38 deletions(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index ed0aba5..f1be85b 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -110,9 +110,9 @@ static void queue_flush(struct request_queue *q, unsigned which) elv_insert(q, rq, ELEVATOR_INSERT_FRONT); } -static inline bool start_ordered(struct request_queue *q, struct request **rqp) +static inline struct request *start_ordered(struct request_queue *q, + struct request *rq) { - struct request *rq = *rqp; unsigned skip = 0; q->orderr = 0; @@ -149,11 +149,9 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp) /* initialize proxy request and queue it */ blk_rq_init(q, rq); - if (bio_data_dir(q->orig_bar_rq->bio) == WRITE) - rq->cmd_flags |= REQ_WRITE; + init_request_from_bio(rq, q->orig_bar_rq->bio); if (q->ordered & QUEUE_ORDERED_DO_FUA) rq->cmd_flags |= REQ_FUA; - init_request_from_bio(rq, q->orig_bar_rq->bio); rq->end_io = bar_end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); @@ -171,27 +169,26 @@ static inline bool start_ordered(struct request_queue *q, struct request **rqp) else skip |= QUEUE_ORDSEQ_DRAIN; - *rqp = rq; - /* * Complete skipped sequences. If whole sequence is complete, - * return false to tell elevator that this request is gone. + * return %NULL to tell elevator that this request is gone. */ - return !blk_ordered_complete_seq(q, skip, 0); + if (blk_ordered_complete_seq(q, skip, 0)) + rq = NULL; + return rq; } -bool blk_do_ordered(struct request_queue *q, struct request **rqp) +struct request *blk_do_ordered(struct request_queue *q, struct request *rq) { - struct request *rq = *rqp; const int is_barrier = rq->cmd_type == REQ_TYPE_FS && (rq->cmd_flags & REQ_HARDBARRIER); if (!q->ordseq) { if (!is_barrier) - return true; + return rq; if (q->next_ordered != QUEUE_ORDERED_NONE) - return start_ordered(q, rqp); + return start_ordered(q, rq); else { /* * Queue ordering not supported. Terminate @@ -199,8 +196,7 @@ bool blk_do_ordered(struct request_queue *q, struct request **rqp) */ blk_dequeue_request(rq); __blk_end_request_all(rq, -EOPNOTSUPP); - *rqp = NULL; - return false; + return NULL; } } @@ -211,14 +207,14 @@ bool blk_do_ordered(struct request_queue *q, struct request **rqp) /* Special requests are not subject to ordering rules. */ if (rq->cmd_type != REQ_TYPE_FS && rq != &q->pre_flush_rq && rq != &q->post_flush_rq) - return true; + return rq; /* Ordered by draining. Wait for turn. */ WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q)); if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q)) - *rqp = NULL; + rq = ERR_PTR(-EAGAIN); - return true; + return rq; } static void bio_end_empty_barrier(struct bio *bio, int err) diff --git a/block/blk-core.c b/block/blk-core.c index f063541..f8d37a8 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1037,22 +1037,6 @@ void blk_insert_request(struct request_queue *q, struct request *rq, } EXPORT_SYMBOL(blk_insert_request); -/* - * add-request adds a request to the linked list. - * queue lock is held and interrupts disabled, as we muck with the - * request queue list. - */ -static inline void add_request(struct request_queue *q, struct request *req) -{ - drive_stat_acct(req, 1); - - /* - * elevator indicated where it wants this request to be - * inserted at elevator_merge time - */ - __elv_add_request(q, req, ELEVATOR_INSERT_SORT, 0); -} - static void part_round_stats_single(int cpu, struct hd_struct *part, unsigned long now) { @@ -1316,7 +1300,10 @@ get_rq: req->cpu = blk_cpu_to_group(smp_processor_id()); if (queue_should_plug(q) && elv_queue_empty(q)) blk_plug_device(q); - add_request(q, req); + + /* insert the request into the elevator */ + drive_stat_acct(req, 1); + __elv_add_request(q, req, ELEVATOR_INSERT_SORT, 0); out: if (unplug || !queue_should_plug(q)) __generic_unplug_device(q); diff --git a/block/blk.h b/block/blk.h index 6e7dc87..874eb4e 100644 --- a/block/blk.h +++ b/block/blk.h @@ -51,6 +51,8 @@ static inline void blk_clear_rq_complete(struct request *rq) */ #define ELV_ON_HASH(rq) (!hlist_unhashed(&(rq)->hash)) +struct request *blk_do_ordered(struct request_queue *q, struct request *rq); + static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; @@ -58,8 +60,9 @@ static inline struct request *__elv_next_request(struct request_queue *q) while (1) { while (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (blk_do_ordered(q, &rq)) - return rq; + rq = blk_do_ordered(q, rq); + if (rq) + return !IS_ERR(rq) ? rq : NULL; } if (!q->elevator->ops->elevator_dispatch_fn(q, 0)) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e97911d4..996549d 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -869,7 +869,6 @@ extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *); extern void blk_queue_rq_timeout(struct request_queue *, unsigned int); extern void blk_queue_flush(struct request_queue *q, unsigned int flush); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); -extern bool blk_do_ordered(struct request_queue *, struct request **); extern unsigned blk_ordered_cur_seq(struct request_queue *); extern unsigned blk_ordered_req_seq(struct request *); extern bool blk_ordered_complete_seq(struct request_queue *, unsigned, int); -- cgit v1.1 From 28e7d1845216538303bb95d679d8fd4de50e2f1a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: drop barrier ordering by queue draining Filesystems will take all the responsibilities for ordering requests around commit writes and will only indicate how the commit writes themselves should be handled by block layers. This patch drops barrier ordering by queue draining from block layer. Ordering by draining implementation was somewhat invasive to request handling. List of notable changes follow. * Each queue has 1 bit color which is flipped on each barrier issue. This is used to track whether a given request is issued before the current barrier or not. REQ_ORDERED_COLOR flag and coloring implementation in __elv_add_request() are removed. * Requests which shouldn't be processed yet for draining were stalled by returning -EAGAIN from blk_do_ordered() according to the test result between blk_ordered_req_seq() and blk_blk_ordered_cur_seq(). This logic is removed. * Draining completion logic in elv_completed_request() removed. * All barrier sequence requests were queued to request queue and then trckled to lower layer according to progress and thus maintaining request orders during requeue was necessary. This is replaced by queueing the next request in the barrier sequence only after the current one is complete from blk_ordered_complete_seq(), which removes the need for multiple proxy requests in struct request_queue and the request sorting logic in the ELEVATOR_INSERT_REQUEUE path of elv_insert(). * As barriers no longer have ordering constraints, there's no need to dump the whole elevator onto the dispatch queue on each barrier. Insert barriers at the front instead. * If other barrier requests come to the front of the dispatch queue while one is already in progress, they are stored in q->pending_barriers and restored to dispatch queue one-by-one after each barrier completion from blk_ordered_complete_seq(). Signed-off-by: Tejun Heo Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-barrier.c | 220 ++++++++++++++++++---------------------------- block/blk-core.c | 11 ++- block/blk.h | 2 +- block/elevator.c | 79 ++--------------- include/linux/blk_types.h | 2 - include/linux/blkdev.h | 19 ++-- 6 files changed, 113 insertions(+), 220 deletions(-) diff --git a/block/blk-barrier.c b/block/blk-barrier.c index f1be85b..e8b2e5c 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -9,6 +9,8 @@ #include "blk.h" +static struct request *queue_next_ordseq(struct request_queue *q); + /* * Cache flushing for ordered writes handling */ @@ -19,38 +21,10 @@ unsigned blk_ordered_cur_seq(struct request_queue *q) return 1 << ffz(q->ordseq); } -unsigned blk_ordered_req_seq(struct request *rq) -{ - struct request_queue *q = rq->q; - - BUG_ON(q->ordseq == 0); - - if (rq == &q->pre_flush_rq) - return QUEUE_ORDSEQ_PREFLUSH; - if (rq == &q->bar_rq) - return QUEUE_ORDSEQ_BAR; - if (rq == &q->post_flush_rq) - return QUEUE_ORDSEQ_POSTFLUSH; - - /* - * !fs requests don't need to follow barrier ordering. Always - * put them at the front. This fixes the following deadlock. - * - * http://thread.gmane.org/gmane.linux.kernel/537473 - */ - if (rq->cmd_type != REQ_TYPE_FS) - return QUEUE_ORDSEQ_DRAIN; - - if ((rq->cmd_flags & REQ_ORDERED_COLOR) == - (q->orig_bar_rq->cmd_flags & REQ_ORDERED_COLOR)) - return QUEUE_ORDSEQ_DRAIN; - else - return QUEUE_ORDSEQ_DONE; -} - -bool blk_ordered_complete_seq(struct request_queue *q, unsigned seq, int error) +static struct request *blk_ordered_complete_seq(struct request_queue *q, + unsigned seq, int error) { - struct request *rq; + struct request *next_rq = NULL; if (error && !q->orderr) q->orderr = error; @@ -58,16 +32,22 @@ bool blk_ordered_complete_seq(struct request_queue *q, unsigned seq, int error) BUG_ON(q->ordseq & seq); q->ordseq |= seq; - if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) - return false; - - /* - * Okay, sequence complete. - */ - q->ordseq = 0; - rq = q->orig_bar_rq; - __blk_end_request_all(rq, q->orderr); - return true; + if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) { + /* not complete yet, queue the next ordered sequence */ + next_rq = queue_next_ordseq(q); + } else { + /* complete this barrier request */ + __blk_end_request_all(q->orig_bar_rq, q->orderr); + q->orig_bar_rq = NULL; + q->ordseq = 0; + + /* dispatch the next barrier if there's one */ + if (!list_empty(&q->pending_barriers)) { + next_rq = list_entry_rq(q->pending_barriers.next); + list_move(&next_rq->queuelist, &q->queue_head); + } + } + return next_rq; } static void pre_flush_end_io(struct request *rq, int error) @@ -88,133 +68,105 @@ static void post_flush_end_io(struct request *rq, int error) blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error); } -static void queue_flush(struct request_queue *q, unsigned which) +static void queue_flush(struct request_queue *q, struct request *rq, + rq_end_io_fn *end_io) { - struct request *rq; - rq_end_io_fn *end_io; - - if (which == QUEUE_ORDERED_DO_PREFLUSH) { - rq = &q->pre_flush_rq; - end_io = pre_flush_end_io; - } else { - rq = &q->post_flush_rq; - end_io = post_flush_end_io; - } - blk_rq_init(q, rq); rq->cmd_type = REQ_TYPE_FS; - rq->cmd_flags = REQ_HARDBARRIER | REQ_FLUSH; + rq->cmd_flags = REQ_FLUSH; rq->rq_disk = q->orig_bar_rq->rq_disk; rq->end_io = end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); } -static inline struct request *start_ordered(struct request_queue *q, - struct request *rq) +static struct request *queue_next_ordseq(struct request_queue *q) { - unsigned skip = 0; - - q->orderr = 0; - q->ordered = q->next_ordered; - q->ordseq |= QUEUE_ORDSEQ_STARTED; - - /* - * For an empty barrier, there's no actual BAR request, which - * in turn makes POSTFLUSH unnecessary. Mask them off. - */ - if (!blk_rq_sectors(rq)) - q->ordered &= ~(QUEUE_ORDERED_DO_BAR | - QUEUE_ORDERED_DO_POSTFLUSH); - - /* stash away the original request */ - blk_dequeue_request(rq); - q->orig_bar_rq = rq; - rq = NULL; - - /* - * Queue ordered sequence. As we stack them at the head, we - * need to queue in reverse order. Note that we rely on that - * no fs request uses ELEVATOR_INSERT_FRONT and thus no fs - * request gets inbetween ordered sequence. - */ - if (q->ordered & QUEUE_ORDERED_DO_POSTFLUSH) { - queue_flush(q, QUEUE_ORDERED_DO_POSTFLUSH); - rq = &q->post_flush_rq; - } else - skip |= QUEUE_ORDSEQ_POSTFLUSH; + struct request *rq = &q->bar_rq; - if (q->ordered & QUEUE_ORDERED_DO_BAR) { - rq = &q->bar_rq; + switch (blk_ordered_cur_seq(q)) { + case QUEUE_ORDSEQ_PREFLUSH: + queue_flush(q, rq, pre_flush_end_io); + break; + case QUEUE_ORDSEQ_BAR: /* initialize proxy request and queue it */ blk_rq_init(q, rq); init_request_from_bio(rq, q->orig_bar_rq->bio); + rq->cmd_flags &= ~REQ_HARDBARRIER; if (q->ordered & QUEUE_ORDERED_DO_FUA) rq->cmd_flags |= REQ_FUA; rq->end_io = bar_end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); - } else - skip |= QUEUE_ORDSEQ_BAR; + break; - if (q->ordered & QUEUE_ORDERED_DO_PREFLUSH) { - queue_flush(q, QUEUE_ORDERED_DO_PREFLUSH); - rq = &q->pre_flush_rq; - } else - skip |= QUEUE_ORDSEQ_PREFLUSH; + case QUEUE_ORDSEQ_POSTFLUSH: + queue_flush(q, rq, post_flush_end_io); + break; - if (queue_in_flight(q)) - rq = NULL; - else - skip |= QUEUE_ORDSEQ_DRAIN; - - /* - * Complete skipped sequences. If whole sequence is complete, - * return %NULL to tell elevator that this request is gone. - */ - if (blk_ordered_complete_seq(q, skip, 0)) - rq = NULL; + default: + BUG(); + } return rq; } struct request *blk_do_ordered(struct request_queue *q, struct request *rq) { - const int is_barrier = rq->cmd_type == REQ_TYPE_FS && - (rq->cmd_flags & REQ_HARDBARRIER); - - if (!q->ordseq) { - if (!is_barrier) - return rq; - - if (q->next_ordered != QUEUE_ORDERED_NONE) - return start_ordered(q, rq); - else { - /* - * Queue ordering not supported. Terminate - * with prejudice. - */ - blk_dequeue_request(rq); - __blk_end_request_all(rq, -EOPNOTSUPP); - return NULL; - } + unsigned skip = 0; + + if (!(rq->cmd_flags & REQ_HARDBARRIER)) + return rq; + + if (q->ordseq) { + /* + * Barrier is already in progress and they can't be + * processed in parallel. Queue for later processing. + */ + list_move_tail(&rq->queuelist, &q->pending_barriers); + return NULL; + } + + if (unlikely(q->next_ordered == QUEUE_ORDERED_NONE)) { + /* + * Queue ordering not supported. Terminate + * with prejudice. + */ + blk_dequeue_request(rq); + __blk_end_request_all(rq, -EOPNOTSUPP); + return NULL; } /* - * Ordered sequence in progress + * Start a new ordered sequence */ + q->orderr = 0; + q->ordered = q->next_ordered; + q->ordseq |= QUEUE_ORDSEQ_STARTED; - /* Special requests are not subject to ordering rules. */ - if (rq->cmd_type != REQ_TYPE_FS && - rq != &q->pre_flush_rq && rq != &q->post_flush_rq) - return rq; + /* + * For an empty barrier, there's no actual BAR request, which + * in turn makes POSTFLUSH unnecessary. Mask them off. + */ + if (!blk_rq_sectors(rq)) + q->ordered &= ~(QUEUE_ORDERED_DO_BAR | + QUEUE_ORDERED_DO_POSTFLUSH); - /* Ordered by draining. Wait for turn. */ - WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q)); - if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q)) - rq = ERR_PTR(-EAGAIN); + /* stash away the original request */ + blk_dequeue_request(rq); + q->orig_bar_rq = rq; - return rq; + if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) + skip |= QUEUE_ORDSEQ_PREFLUSH; + + if (!(q->ordered & QUEUE_ORDERED_DO_BAR)) + skip |= QUEUE_ORDSEQ_BAR; + + if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH)) + skip |= QUEUE_ORDSEQ_POSTFLUSH; + + /* complete skipped sequences and return the first sequence */ + return blk_ordered_complete_seq(q, skip, 0); } static void bio_end_empty_barrier(struct bio *bio, int err) diff --git a/block/blk-core.c b/block/blk-core.c index f8d37a8..d316662 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -520,6 +520,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) init_timer(&q->unplug_timer); setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q); INIT_LIST_HEAD(&q->timeout_list); + INIT_LIST_HEAD(&q->pending_barriers); INIT_WORK(&q->unplug_work, blk_unplug_work); kobject_init(&q->kobj, &blk_queue_ktype); @@ -1185,6 +1186,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) const bool sync = (bio->bi_rw & REQ_SYNC); const bool unplug = (bio->bi_rw & REQ_UNPLUG); const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK; + int where = ELEVATOR_INSERT_SORT; int rw_flags; /* REQ_HARDBARRIER is no more */ @@ -1203,7 +1205,12 @@ static int __make_request(struct request_queue *q, struct bio *bio) spin_lock_irq(q->queue_lock); - if (unlikely((bio->bi_rw & REQ_HARDBARRIER)) || elv_queue_empty(q)) + if (bio->bi_rw & REQ_HARDBARRIER) { + where = ELEVATOR_INSERT_FRONT; + goto get_rq; + } + + if (elv_queue_empty(q)) goto get_rq; el_ret = elv_merge(q, &req, bio); @@ -1303,7 +1310,7 @@ get_rq: /* insert the request into the elevator */ drive_stat_acct(req, 1); - __elv_add_request(q, req, ELEVATOR_INSERT_SORT, 0); + __elv_add_request(q, req, where, 0); out: if (unplug || !queue_should_plug(q)) __generic_unplug_device(q); diff --git a/block/blk.h b/block/blk.h index 874eb4e..08081e4 100644 --- a/block/blk.h +++ b/block/blk.h @@ -62,7 +62,7 @@ static inline struct request *__elv_next_request(struct request_queue *q) rq = list_entry_rq(q->queue_head.next); rq = blk_do_ordered(q, rq); if (rq) - return !IS_ERR(rq) ? rq : NULL; + return rq; } if (!q->elevator->ops->elevator_dispatch_fn(q, 0)) diff --git a/block/elevator.c b/block/elevator.c index ec585c9..241c69c 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -617,8 +617,6 @@ void elv_quiesce_end(struct request_queue *q) void elv_insert(struct request_queue *q, struct request *rq, int where) { - struct list_head *pos; - unsigned ordseq; int unplug_it = 1; trace_block_rq_insert(q, rq); @@ -626,9 +624,16 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) rq->q = q; switch (where) { + case ELEVATOR_INSERT_REQUEUE: + /* + * Most requeues happen because of a busy condition, + * don't force unplug of the queue for that case. + * Clear unplug_it and fall through. + */ + unplug_it = 0; + case ELEVATOR_INSERT_FRONT: rq->cmd_flags |= REQ_SOFTBARRIER; - list_add(&rq->queuelist, &q->queue_head); break; @@ -668,36 +673,6 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) q->elevator->ops->elevator_add_req_fn(q, rq); break; - case ELEVATOR_INSERT_REQUEUE: - /* - * If ordered flush isn't in progress, we do front - * insertion; otherwise, requests should be requeued - * in ordseq order. - */ - rq->cmd_flags |= REQ_SOFTBARRIER; - - /* - * Most requeues happen because of a busy condition, - * don't force unplug of the queue for that case. - */ - unplug_it = 0; - - if (q->ordseq == 0) { - list_add(&rq->queuelist, &q->queue_head); - break; - } - - ordseq = blk_ordered_req_seq(rq); - - list_for_each(pos, &q->queue_head) { - struct request *pos_rq = list_entry_rq(pos); - if (ordseq <= blk_ordered_req_seq(pos_rq)) - break; - } - - list_add_tail(&rq->queuelist, pos); - break; - default: printk(KERN_ERR "%s: bad insertion point %d\n", __func__, where); @@ -716,26 +691,8 @@ void elv_insert(struct request_queue *q, struct request *rq, int where) void __elv_add_request(struct request_queue *q, struct request *rq, int where, int plug) { - if (q->ordcolor) - rq->cmd_flags |= REQ_ORDERED_COLOR; - if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { - /* - * toggle ordered color - */ - if (rq->cmd_flags & REQ_HARDBARRIER) - q->ordcolor ^= 1; - - /* - * barriers implicitly indicate back insertion - */ - if (where == ELEVATOR_INSERT_SORT) - where = ELEVATOR_INSERT_BACK; - - /* - * this request is scheduling boundary, update - * end_sector - */ + /* barriers are scheduling boundary, update end_sector */ if (rq->cmd_type == REQ_TYPE_FS || (rq->cmd_flags & REQ_DISCARD)) { q->end_sector = rq_end_sector(rq); @@ -855,24 +812,6 @@ void elv_completed_request(struct request_queue *q, struct request *rq) e->ops->elevator_completed_req_fn) e->ops->elevator_completed_req_fn(q, rq); } - - /* - * Check if the queue is waiting for fs requests to be - * drained for flush sequence. - */ - if (unlikely(q->ordseq)) { - struct request *next = NULL; - - if (!list_empty(&q->queue_head)) - next = list_entry_rq(q->queue_head.next); - - if (!queue_in_flight(q) && - blk_ordered_cur_seq(q) == QUEUE_ORDSEQ_DRAIN && - (!next || blk_ordered_req_seq(next) > QUEUE_ORDSEQ_DRAIN)) { - blk_ordered_complete_seq(q, QUEUE_ORDSEQ_DRAIN, 0); - __blk_run_queue(q); - } - } } #define to_elv(atr) container_of((atr), struct elv_fs_entry, attr) diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index ca83a97..9192282 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -143,7 +143,6 @@ enum rq_flag_bits { __REQ_FAILED, /* set if the request failed */ __REQ_QUIET, /* don't worry about errors */ __REQ_PREEMPT, /* set for "ide_preempt" requests */ - __REQ_ORDERED_COLOR, /* is before or after barrier */ __REQ_ALLOCED, /* request came from our alloc pool */ __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ @@ -184,7 +183,6 @@ enum rq_flag_bits { #define REQ_FAILED (1 << __REQ_FAILED) #define REQ_QUIET (1 << __REQ_QUIET) #define REQ_PREEMPT (1 << __REQ_PREEMPT) -#define REQ_ORDERED_COLOR (1 << __REQ_ORDERED_COLOR) #define REQ_ALLOCED (1 << __REQ_ALLOCED) #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 996549d..20a3710 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -360,9 +360,10 @@ struct request_queue unsigned int flush_flags; unsigned int ordered, next_ordered, ordseq; - int orderr, ordcolor; - struct request pre_flush_rq, bar_rq, post_flush_rq; + int orderr; + struct request bar_rq; struct request *orig_bar_rq; + struct list_head pending_barriers; struct mutex sysfs_lock; @@ -491,12 +492,11 @@ enum { /* * Ordered operation sequence */ - QUEUE_ORDSEQ_STARTED = 0x01, /* flushing in progress */ - QUEUE_ORDSEQ_DRAIN = 0x02, /* waiting for the queue to be drained */ - QUEUE_ORDSEQ_PREFLUSH = 0x04, /* pre-flushing in progress */ - QUEUE_ORDSEQ_BAR = 0x08, /* original barrier req in progress */ - QUEUE_ORDSEQ_POSTFLUSH = 0x10, /* post-flushing in progress */ - QUEUE_ORDSEQ_DONE = 0x20, + QUEUE_ORDSEQ_STARTED = (1 << 0), /* flushing in progress */ + QUEUE_ORDSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ + QUEUE_ORDSEQ_BAR = (1 << 2), /* barrier write in progress */ + QUEUE_ORDSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ + QUEUE_ORDSEQ_DONE = (1 << 4), }; #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) @@ -869,9 +869,6 @@ extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *); extern void blk_queue_rq_timeout(struct request_queue *, unsigned int); extern void blk_queue_flush(struct request_queue *q, unsigned int flush); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); -extern unsigned blk_ordered_cur_seq(struct request_queue *); -extern unsigned blk_ordered_req_seq(struct request *); -extern bool blk_ordered_complete_seq(struct request_queue *, unsigned, int); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); extern void blk_dump_rq_flags(struct request *, char *); -- cgit v1.1 From 8839a0e055d9abd6c011d533373a8dd266cad011 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: rename blk-barrier.c to blk-flush.c Without ordering requirements, barrier and ordering are minomers. Rename block/blk-barrier.c to block/blk-flush.c. Rename of symbols will follow. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/Makefile | 2 +- block/blk-barrier.c | 248 ---------------------------------------------------- block/blk-flush.c | 248 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 249 insertions(+), 249 deletions(-) delete mode 100644 block/blk-barrier.c create mode 100644 block/blk-flush.c diff --git a/block/Makefile b/block/Makefile index 0bb499a..f627e4b 100644 --- a/block/Makefile +++ b/block/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \ - blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \ + blk-flush.o blk-settings.o blk-ioc.o blk-map.o \ blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \ blk-iopoll.o blk-lib.o ioctl.o genhd.o scsi_ioctl.o diff --git a/block/blk-barrier.c b/block/blk-barrier.c deleted file mode 100644 index e8b2e5c..0000000 --- a/block/blk-barrier.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Functions related to barrier IO handling - */ -#include -#include -#include -#include -#include - -#include "blk.h" - -static struct request *queue_next_ordseq(struct request_queue *q); - -/* - * Cache flushing for ordered writes handling - */ -unsigned blk_ordered_cur_seq(struct request_queue *q) -{ - if (!q->ordseq) - return 0; - return 1 << ffz(q->ordseq); -} - -static struct request *blk_ordered_complete_seq(struct request_queue *q, - unsigned seq, int error) -{ - struct request *next_rq = NULL; - - if (error && !q->orderr) - q->orderr = error; - - BUG_ON(q->ordseq & seq); - q->ordseq |= seq; - - if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) { - /* not complete yet, queue the next ordered sequence */ - next_rq = queue_next_ordseq(q); - } else { - /* complete this barrier request */ - __blk_end_request_all(q->orig_bar_rq, q->orderr); - q->orig_bar_rq = NULL; - q->ordseq = 0; - - /* dispatch the next barrier if there's one */ - if (!list_empty(&q->pending_barriers)) { - next_rq = list_entry_rq(q->pending_barriers.next); - list_move(&next_rq->queuelist, &q->queue_head); - } - } - return next_rq; -} - -static void pre_flush_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_PREFLUSH, error); -} - -static void bar_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_BAR, error); -} - -static void post_flush_end_io(struct request *rq, int error) -{ - elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error); -} - -static void queue_flush(struct request_queue *q, struct request *rq, - rq_end_io_fn *end_io) -{ - blk_rq_init(q, rq); - rq->cmd_type = REQ_TYPE_FS; - rq->cmd_flags = REQ_FLUSH; - rq->rq_disk = q->orig_bar_rq->rq_disk; - rq->end_io = end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); -} - -static struct request *queue_next_ordseq(struct request_queue *q) -{ - struct request *rq = &q->bar_rq; - - switch (blk_ordered_cur_seq(q)) { - case QUEUE_ORDSEQ_PREFLUSH: - queue_flush(q, rq, pre_flush_end_io); - break; - - case QUEUE_ORDSEQ_BAR: - /* initialize proxy request and queue it */ - blk_rq_init(q, rq); - init_request_from_bio(rq, q->orig_bar_rq->bio); - rq->cmd_flags &= ~REQ_HARDBARRIER; - if (q->ordered & QUEUE_ORDERED_DO_FUA) - rq->cmd_flags |= REQ_FUA; - rq->end_io = bar_end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); - break; - - case QUEUE_ORDSEQ_POSTFLUSH: - queue_flush(q, rq, post_flush_end_io); - break; - - default: - BUG(); - } - return rq; -} - -struct request *blk_do_ordered(struct request_queue *q, struct request *rq) -{ - unsigned skip = 0; - - if (!(rq->cmd_flags & REQ_HARDBARRIER)) - return rq; - - if (q->ordseq) { - /* - * Barrier is already in progress and they can't be - * processed in parallel. Queue for later processing. - */ - list_move_tail(&rq->queuelist, &q->pending_barriers); - return NULL; - } - - if (unlikely(q->next_ordered == QUEUE_ORDERED_NONE)) { - /* - * Queue ordering not supported. Terminate - * with prejudice. - */ - blk_dequeue_request(rq); - __blk_end_request_all(rq, -EOPNOTSUPP); - return NULL; - } - - /* - * Start a new ordered sequence - */ - q->orderr = 0; - q->ordered = q->next_ordered; - q->ordseq |= QUEUE_ORDSEQ_STARTED; - - /* - * For an empty barrier, there's no actual BAR request, which - * in turn makes POSTFLUSH unnecessary. Mask them off. - */ - if (!blk_rq_sectors(rq)) - q->ordered &= ~(QUEUE_ORDERED_DO_BAR | - QUEUE_ORDERED_DO_POSTFLUSH); - - /* stash away the original request */ - blk_dequeue_request(rq); - q->orig_bar_rq = rq; - - if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) - skip |= QUEUE_ORDSEQ_PREFLUSH; - - if (!(q->ordered & QUEUE_ORDERED_DO_BAR)) - skip |= QUEUE_ORDSEQ_BAR; - - if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH)) - skip |= QUEUE_ORDSEQ_POSTFLUSH; - - /* complete skipped sequences and return the first sequence */ - return blk_ordered_complete_seq(q, skip, 0); -} - -static void bio_end_empty_barrier(struct bio *bio, int err) -{ - if (err) { - if (err == -EOPNOTSUPP) - set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); - clear_bit(BIO_UPTODATE, &bio->bi_flags); - } - if (bio->bi_private) - complete(bio->bi_private); - bio_put(bio); -} - -/** - * blkdev_issue_flush - queue a flush - * @bdev: blockdev to issue flush for - * @gfp_mask: memory allocation flags (for bio_alloc) - * @error_sector: error sector - * @flags: BLKDEV_IFL_* flags to control behaviour - * - * Description: - * Issue a flush for the block device in question. Caller can supply - * room for storing the error offset in case of a flush error, if they - * wish to. If WAIT flag is not passed then caller may check only what - * request was pushed in some internal queue for later handling. - */ -int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, - sector_t *error_sector, unsigned long flags) -{ - DECLARE_COMPLETION_ONSTACK(wait); - struct request_queue *q; - struct bio *bio; - int ret = 0; - - if (bdev->bd_disk == NULL) - return -ENXIO; - - q = bdev_get_queue(bdev); - if (!q) - return -ENXIO; - - /* - * some block devices may not have their queue correctly set up here - * (e.g. loop device without a backing file) and so issuing a flush - * here will panic. Ensure there is a request function before issuing - * the barrier. - */ - if (!q->make_request_fn) - return -ENXIO; - - bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_empty_barrier; - bio->bi_bdev = bdev; - if (test_bit(BLKDEV_WAIT, &flags)) - bio->bi_private = &wait; - - bio_get(bio); - submit_bio(WRITE_BARRIER, bio); - if (test_bit(BLKDEV_WAIT, &flags)) { - wait_for_completion(&wait); - /* - * The driver must store the error location in ->bi_sector, if - * it supports it. For non-stacked drivers, this should be - * copied from blk_rq_pos(rq). - */ - if (error_sector) - *error_sector = bio->bi_sector; - } - - if (bio_flagged(bio, BIO_EOPNOTSUPP)) - ret = -EOPNOTSUPP; - else if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - - bio_put(bio); - return ret; -} -EXPORT_SYMBOL(blkdev_issue_flush); diff --git a/block/blk-flush.c b/block/blk-flush.c new file mode 100644 index 0000000..e8b2e5c --- /dev/null +++ b/block/blk-flush.c @@ -0,0 +1,248 @@ +/* + * Functions related to barrier IO handling + */ +#include +#include +#include +#include +#include + +#include "blk.h" + +static struct request *queue_next_ordseq(struct request_queue *q); + +/* + * Cache flushing for ordered writes handling + */ +unsigned blk_ordered_cur_seq(struct request_queue *q) +{ + if (!q->ordseq) + return 0; + return 1 << ffz(q->ordseq); +} + +static struct request *blk_ordered_complete_seq(struct request_queue *q, + unsigned seq, int error) +{ + struct request *next_rq = NULL; + + if (error && !q->orderr) + q->orderr = error; + + BUG_ON(q->ordseq & seq); + q->ordseq |= seq; + + if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) { + /* not complete yet, queue the next ordered sequence */ + next_rq = queue_next_ordseq(q); + } else { + /* complete this barrier request */ + __blk_end_request_all(q->orig_bar_rq, q->orderr); + q->orig_bar_rq = NULL; + q->ordseq = 0; + + /* dispatch the next barrier if there's one */ + if (!list_empty(&q->pending_barriers)) { + next_rq = list_entry_rq(q->pending_barriers.next); + list_move(&next_rq->queuelist, &q->queue_head); + } + } + return next_rq; +} + +static void pre_flush_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_PREFLUSH, error); +} + +static void bar_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_BAR, error); +} + +static void post_flush_end_io(struct request *rq, int error) +{ + elv_completed_request(rq->q, rq); + blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error); +} + +static void queue_flush(struct request_queue *q, struct request *rq, + rq_end_io_fn *end_io) +{ + blk_rq_init(q, rq); + rq->cmd_type = REQ_TYPE_FS; + rq->cmd_flags = REQ_FLUSH; + rq->rq_disk = q->orig_bar_rq->rq_disk; + rq->end_io = end_io; + + elv_insert(q, rq, ELEVATOR_INSERT_FRONT); +} + +static struct request *queue_next_ordseq(struct request_queue *q) +{ + struct request *rq = &q->bar_rq; + + switch (blk_ordered_cur_seq(q)) { + case QUEUE_ORDSEQ_PREFLUSH: + queue_flush(q, rq, pre_flush_end_io); + break; + + case QUEUE_ORDSEQ_BAR: + /* initialize proxy request and queue it */ + blk_rq_init(q, rq); + init_request_from_bio(rq, q->orig_bar_rq->bio); + rq->cmd_flags &= ~REQ_HARDBARRIER; + if (q->ordered & QUEUE_ORDERED_DO_FUA) + rq->cmd_flags |= REQ_FUA; + rq->end_io = bar_end_io; + + elv_insert(q, rq, ELEVATOR_INSERT_FRONT); + break; + + case QUEUE_ORDSEQ_POSTFLUSH: + queue_flush(q, rq, post_flush_end_io); + break; + + default: + BUG(); + } + return rq; +} + +struct request *blk_do_ordered(struct request_queue *q, struct request *rq) +{ + unsigned skip = 0; + + if (!(rq->cmd_flags & REQ_HARDBARRIER)) + return rq; + + if (q->ordseq) { + /* + * Barrier is already in progress and they can't be + * processed in parallel. Queue for later processing. + */ + list_move_tail(&rq->queuelist, &q->pending_barriers); + return NULL; + } + + if (unlikely(q->next_ordered == QUEUE_ORDERED_NONE)) { + /* + * Queue ordering not supported. Terminate + * with prejudice. + */ + blk_dequeue_request(rq); + __blk_end_request_all(rq, -EOPNOTSUPP); + return NULL; + } + + /* + * Start a new ordered sequence + */ + q->orderr = 0; + q->ordered = q->next_ordered; + q->ordseq |= QUEUE_ORDSEQ_STARTED; + + /* + * For an empty barrier, there's no actual BAR request, which + * in turn makes POSTFLUSH unnecessary. Mask them off. + */ + if (!blk_rq_sectors(rq)) + q->ordered &= ~(QUEUE_ORDERED_DO_BAR | + QUEUE_ORDERED_DO_POSTFLUSH); + + /* stash away the original request */ + blk_dequeue_request(rq); + q->orig_bar_rq = rq; + + if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) + skip |= QUEUE_ORDSEQ_PREFLUSH; + + if (!(q->ordered & QUEUE_ORDERED_DO_BAR)) + skip |= QUEUE_ORDSEQ_BAR; + + if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH)) + skip |= QUEUE_ORDSEQ_POSTFLUSH; + + /* complete skipped sequences and return the first sequence */ + return blk_ordered_complete_seq(q, skip, 0); +} + +static void bio_end_empty_barrier(struct bio *bio, int err) +{ + if (err) { + if (err == -EOPNOTSUPP) + set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); + clear_bit(BIO_UPTODATE, &bio->bi_flags); + } + if (bio->bi_private) + complete(bio->bi_private); + bio_put(bio); +} + +/** + * blkdev_issue_flush - queue a flush + * @bdev: blockdev to issue flush for + * @gfp_mask: memory allocation flags (for bio_alloc) + * @error_sector: error sector + * @flags: BLKDEV_IFL_* flags to control behaviour + * + * Description: + * Issue a flush for the block device in question. Caller can supply + * room for storing the error offset in case of a flush error, if they + * wish to. If WAIT flag is not passed then caller may check only what + * request was pushed in some internal queue for later handling. + */ +int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, + sector_t *error_sector, unsigned long flags) +{ + DECLARE_COMPLETION_ONSTACK(wait); + struct request_queue *q; + struct bio *bio; + int ret = 0; + + if (bdev->bd_disk == NULL) + return -ENXIO; + + q = bdev_get_queue(bdev); + if (!q) + return -ENXIO; + + /* + * some block devices may not have their queue correctly set up here + * (e.g. loop device without a backing file) and so issuing a flush + * here will panic. Ensure there is a request function before issuing + * the barrier. + */ + if (!q->make_request_fn) + return -ENXIO; + + bio = bio_alloc(gfp_mask, 0); + bio->bi_end_io = bio_end_empty_barrier; + bio->bi_bdev = bdev; + if (test_bit(BLKDEV_WAIT, &flags)) + bio->bi_private = &wait; + + bio_get(bio); + submit_bio(WRITE_BARRIER, bio); + if (test_bit(BLKDEV_WAIT, &flags)) { + wait_for_completion(&wait); + /* + * The driver must store the error location in ->bi_sector, if + * it supports it. For non-stacked drivers, this should be + * copied from blk_rq_pos(rq). + */ + if (error_sector) + *error_sector = bio->bi_sector; + } + + if (bio_flagged(bio, BIO_EOPNOTSUPP)) + ret = -EOPNOTSUPP; + else if (!bio_flagged(bio, BIO_UPTODATE)) + ret = -EIO; + + bio_put(bio); + return ret; +} +EXPORT_SYMBOL(blkdev_issue_flush); -- cgit v1.1 From dd4c133f387c48f526022860ad70354637a80f4c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:16 +0200 Subject: block: rename barrier/ordered to flush With ordering requirements dropped, barrier and ordered are misnomers. Now all block layer does is sequencing FLUSH and FUA. Rename them to flush. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 21 ++++++----- block/blk-flush.c | 98 +++++++++++++++++++++++++------------------------- block/blk.h | 4 +-- include/linux/blkdev.h | 24 ++++++------- 4 files changed, 72 insertions(+), 75 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index d316662..8870ae4 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -136,7 +136,7 @@ static void req_bio_endio(struct request *rq, struct bio *bio, { struct request_queue *q = rq->q; - if (&q->bar_rq != rq) { + if (&q->flush_rq != rq) { if (error) clear_bit(BIO_UPTODATE, &bio->bi_flags); else if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) @@ -160,13 +160,12 @@ static void req_bio_endio(struct request *rq, struct bio *bio, if (bio->bi_size == 0) bio_endio(bio, error); } else { - /* - * Okay, this is the barrier request in progress, just - * record the error; + * Okay, this is the sequenced flush request in + * progress, just record the error; */ - if (error && !q->orderr) - q->orderr = error; + if (error && !q->flush_err) + q->flush_err = error; } } @@ -520,7 +519,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) init_timer(&q->unplug_timer); setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q); INIT_LIST_HEAD(&q->timeout_list); - INIT_LIST_HEAD(&q->pending_barriers); + INIT_LIST_HEAD(&q->pending_flushes); INIT_WORK(&q->unplug_work, blk_unplug_work); kobject_init(&q->kobj, &blk_queue_ktype); @@ -1764,11 +1763,11 @@ static void blk_account_io_completion(struct request *req, unsigned int bytes) static void blk_account_io_done(struct request *req) { /* - * Account IO completion. bar_rq isn't accounted as a normal - * IO on queueing nor completion. Accounting the containing - * request is enough. + * Account IO completion. flush_rq isn't accounted as a + * normal IO on queueing nor completion. Accounting the + * containing request is enough. */ - if (blk_do_io_stat(req) && req != &req->q->bar_rq) { + if (blk_do_io_stat(req) && req != &req->q->flush_rq) { unsigned long duration = jiffies - req->start_time; const int rw = rq_data_dir(req); struct hd_struct *part; diff --git a/block/blk-flush.c b/block/blk-flush.c index e8b2e5c..dd87322 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -9,41 +9,38 @@ #include "blk.h" -static struct request *queue_next_ordseq(struct request_queue *q); +static struct request *queue_next_fseq(struct request_queue *q); -/* - * Cache flushing for ordered writes handling - */ -unsigned blk_ordered_cur_seq(struct request_queue *q) +unsigned blk_flush_cur_seq(struct request_queue *q) { - if (!q->ordseq) + if (!q->flush_seq) return 0; - return 1 << ffz(q->ordseq); + return 1 << ffz(q->flush_seq); } -static struct request *blk_ordered_complete_seq(struct request_queue *q, - unsigned seq, int error) +static struct request *blk_flush_complete_seq(struct request_queue *q, + unsigned seq, int error) { struct request *next_rq = NULL; - if (error && !q->orderr) - q->orderr = error; + if (error && !q->flush_err) + q->flush_err = error; - BUG_ON(q->ordseq & seq); - q->ordseq |= seq; + BUG_ON(q->flush_seq & seq); + q->flush_seq |= seq; - if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) { - /* not complete yet, queue the next ordered sequence */ - next_rq = queue_next_ordseq(q); + if (blk_flush_cur_seq(q) != QUEUE_FSEQ_DONE) { + /* not complete yet, queue the next flush sequence */ + next_rq = queue_next_fseq(q); } else { - /* complete this barrier request */ - __blk_end_request_all(q->orig_bar_rq, q->orderr); - q->orig_bar_rq = NULL; - q->ordseq = 0; - - /* dispatch the next barrier if there's one */ - if (!list_empty(&q->pending_barriers)) { - next_rq = list_entry_rq(q->pending_barriers.next); + /* complete this flush request */ + __blk_end_request_all(q->orig_flush_rq, q->flush_err); + q->orig_flush_rq = NULL; + q->flush_seq = 0; + + /* dispatch the next flush if there's one */ + if (!list_empty(&q->pending_flushes)) { + next_rq = list_entry_rq(q->pending_flushes.next); list_move(&next_rq->queuelist, &q->queue_head); } } @@ -53,19 +50,19 @@ static struct request *blk_ordered_complete_seq(struct request_queue *q, static void pre_flush_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_PREFLUSH, error); + blk_flush_complete_seq(rq->q, QUEUE_FSEQ_PREFLUSH, error); } -static void bar_end_io(struct request *rq, int error) +static void flush_data_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_BAR, error); + blk_flush_complete_seq(rq->q, QUEUE_FSEQ_DATA, error); } static void post_flush_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error); + blk_flush_complete_seq(rq->q, QUEUE_FSEQ_POSTFLUSH, error); } static void queue_flush(struct request_queue *q, struct request *rq, @@ -74,34 +71,34 @@ static void queue_flush(struct request_queue *q, struct request *rq, blk_rq_init(q, rq); rq->cmd_type = REQ_TYPE_FS; rq->cmd_flags = REQ_FLUSH; - rq->rq_disk = q->orig_bar_rq->rq_disk; + rq->rq_disk = q->orig_flush_rq->rq_disk; rq->end_io = end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); } -static struct request *queue_next_ordseq(struct request_queue *q) +static struct request *queue_next_fseq(struct request_queue *q) { - struct request *rq = &q->bar_rq; + struct request *rq = &q->flush_rq; - switch (blk_ordered_cur_seq(q)) { - case QUEUE_ORDSEQ_PREFLUSH: + switch (blk_flush_cur_seq(q)) { + case QUEUE_FSEQ_PREFLUSH: queue_flush(q, rq, pre_flush_end_io); break; - case QUEUE_ORDSEQ_BAR: + case QUEUE_FSEQ_DATA: /* initialize proxy request and queue it */ blk_rq_init(q, rq); - init_request_from_bio(rq, q->orig_bar_rq->bio); + init_request_from_bio(rq, q->orig_flush_rq->bio); rq->cmd_flags &= ~REQ_HARDBARRIER; if (q->ordered & QUEUE_ORDERED_DO_FUA) rq->cmd_flags |= REQ_FUA; - rq->end_io = bar_end_io; + rq->end_io = flush_data_end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); break; - case QUEUE_ORDSEQ_POSTFLUSH: + case QUEUE_FSEQ_POSTFLUSH: queue_flush(q, rq, post_flush_end_io); break; @@ -111,19 +108,20 @@ static struct request *queue_next_ordseq(struct request_queue *q) return rq; } -struct request *blk_do_ordered(struct request_queue *q, struct request *rq) +struct request *blk_do_flush(struct request_queue *q, struct request *rq) { unsigned skip = 0; if (!(rq->cmd_flags & REQ_HARDBARRIER)) return rq; - if (q->ordseq) { + if (q->flush_seq) { /* - * Barrier is already in progress and they can't be - * processed in parallel. Queue for later processing. + * Sequenced flush is already in progress and they + * can't be processed in parallel. Queue for later + * processing. */ - list_move_tail(&rq->queuelist, &q->pending_barriers); + list_move_tail(&rq->queuelist, &q->pending_flushes); return NULL; } @@ -138,11 +136,11 @@ struct request *blk_do_ordered(struct request_queue *q, struct request *rq) } /* - * Start a new ordered sequence + * Start a new flush sequence */ - q->orderr = 0; + q->flush_err = 0; q->ordered = q->next_ordered; - q->ordseq |= QUEUE_ORDSEQ_STARTED; + q->flush_seq |= QUEUE_FSEQ_STARTED; /* * For an empty barrier, there's no actual BAR request, which @@ -154,19 +152,19 @@ struct request *blk_do_ordered(struct request_queue *q, struct request *rq) /* stash away the original request */ blk_dequeue_request(rq); - q->orig_bar_rq = rq; + q->orig_flush_rq = rq; if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) - skip |= QUEUE_ORDSEQ_PREFLUSH; + skip |= QUEUE_FSEQ_PREFLUSH; if (!(q->ordered & QUEUE_ORDERED_DO_BAR)) - skip |= QUEUE_ORDSEQ_BAR; + skip |= QUEUE_FSEQ_DATA; if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH)) - skip |= QUEUE_ORDSEQ_POSTFLUSH; + skip |= QUEUE_FSEQ_POSTFLUSH; /* complete skipped sequences and return the first sequence */ - return blk_ordered_complete_seq(q, skip, 0); + return blk_flush_complete_seq(q, skip, 0); } static void bio_end_empty_barrier(struct bio *bio, int err) diff --git a/block/blk.h b/block/blk.h index 08081e4..24b92bd 100644 --- a/block/blk.h +++ b/block/blk.h @@ -51,7 +51,7 @@ static inline void blk_clear_rq_complete(struct request *rq) */ #define ELV_ON_HASH(rq) (!hlist_unhashed(&(rq)->hash)) -struct request *blk_do_ordered(struct request_queue *q, struct request *rq); +struct request *blk_do_flush(struct request_queue *q, struct request *rq); static inline struct request *__elv_next_request(struct request_queue *q) { @@ -60,7 +60,7 @@ static inline struct request *__elv_next_request(struct request_queue *q) while (1) { while (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - rq = blk_do_ordered(q, rq); + rq = blk_do_flush(q, rq); if (rq) return rq; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 20a3710..1cd83ec 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -357,13 +357,13 @@ struct request_queue /* * for flush operations */ + unsigned int ordered, next_ordered; unsigned int flush_flags; - - unsigned int ordered, next_ordered, ordseq; - int orderr; - struct request bar_rq; - struct request *orig_bar_rq; - struct list_head pending_barriers; + unsigned int flush_seq; + int flush_err; + struct request flush_rq; + struct request *orig_flush_rq; + struct list_head pending_flushes; struct mutex sysfs_lock; @@ -490,13 +490,13 @@ enum { QUEUE_ORDERED_DO_FUA, /* - * Ordered operation sequence + * FLUSH/FUA sequences. */ - QUEUE_ORDSEQ_STARTED = (1 << 0), /* flushing in progress */ - QUEUE_ORDSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ - QUEUE_ORDSEQ_BAR = (1 << 2), /* barrier write in progress */ - QUEUE_ORDSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ - QUEUE_ORDSEQ_DONE = (1 << 4), + QUEUE_FSEQ_STARTED = (1 << 0), /* flushing in progress */ + QUEUE_FSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ + QUEUE_FSEQ_DATA = (1 << 2), /* data write in progress */ + QUEUE_FSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ + QUEUE_FSEQ_DONE = (1 << 4), }; #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) -- cgit v1.1 From 4fed947cb311e5aa51781d316cefca836352f6ce Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requests Now that the backend conversion is complete, export sequenced FLUSH/FUA capability through REQ_FLUSH/FUA flags. REQ_FLUSH means the device cache should be flushed before executing the request. REQ_FUA means that the data in the request should be on non-volatile media on completion. Block layer will choose the correct way of implementing the semantics and execute it. The request may be passed to the device directly if the device can handle it; otherwise, it will be sequenced using one or more proxy requests. Devices will never see REQ_FLUSH and/or FUA which it doesn't support. Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are never failed with -EOPNOTSUPP. If the underlying device doesn't support FLUSH/FUA, the block layer simply make those noop. IOW, it no longer distinguishes between writeback cache which doesn't support cache flush and writethrough/no cache. Devices which have WB cache w/o flush are very difficult to come by these days and there's nothing much we can do anyway, so it doesn't make sense to require everyone to implement -EOPNOTSUPP handling. This will simplify filesystems and block drivers as they can drop -EOPNOTSUPP retry logic for barriers. * QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into blk-flush.c. * REQ_FLUSH w/o data can also be directly passed to drivers without sequencing but some drivers assume that zero length requests don't have rq->bio which isn't true for these requests requiring the use of proxy requests. * REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are copied from bio to request. * WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA are added. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 2 +- block/blk-flush.c | 85 ++++++++++++++++++++++++--------------------- block/blk.h | 3 ++ include/linux/blk_types.h | 2 +- include/linux/blkdev.h | 38 ++------------------ include/linux/buffer_head.h | 2 +- include/linux/fs.h | 19 ++++++---- 7 files changed, 67 insertions(+), 84 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 8870ae4..18455c4 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1204,7 +1204,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) spin_lock_irq(q->queue_lock); - if (bio->bi_rw & REQ_HARDBARRIER) { + if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) { where = ELEVATOR_INSERT_FRONT; goto get_rq; } diff --git a/block/blk-flush.c b/block/blk-flush.c index dd87322..452c552 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -1,5 +1,5 @@ /* - * Functions related to barrier IO handling + * Functions to sequence FLUSH and FUA writes. */ #include #include @@ -9,6 +9,15 @@ #include "blk.h" +/* FLUSH/FUA sequences */ +enum { + QUEUE_FSEQ_STARTED = (1 << 0), /* flushing in progress */ + QUEUE_FSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ + QUEUE_FSEQ_DATA = (1 << 2), /* data write in progress */ + QUEUE_FSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ + QUEUE_FSEQ_DONE = (1 << 4), +}; + static struct request *queue_next_fseq(struct request_queue *q); unsigned blk_flush_cur_seq(struct request_queue *q) @@ -79,6 +88,7 @@ static void queue_flush(struct request_queue *q, struct request *rq, static struct request *queue_next_fseq(struct request_queue *q) { + struct request *orig_rq = q->orig_flush_rq; struct request *rq = &q->flush_rq; switch (blk_flush_cur_seq(q)) { @@ -87,12 +97,11 @@ static struct request *queue_next_fseq(struct request_queue *q) break; case QUEUE_FSEQ_DATA: - /* initialize proxy request and queue it */ + /* initialize proxy request, inherit FLUSH/FUA and queue it */ blk_rq_init(q, rq); - init_request_from_bio(rq, q->orig_flush_rq->bio); - rq->cmd_flags &= ~REQ_HARDBARRIER; - if (q->ordered & QUEUE_ORDERED_DO_FUA) - rq->cmd_flags |= REQ_FUA; + init_request_from_bio(rq, orig_rq->bio); + rq->cmd_flags &= ~(REQ_FLUSH | REQ_FUA); + rq->cmd_flags |= orig_rq->cmd_flags & (REQ_FLUSH | REQ_FUA); rq->end_io = flush_data_end_io; elv_insert(q, rq, ELEVATOR_INSERT_FRONT); @@ -110,60 +119,58 @@ static struct request *queue_next_fseq(struct request_queue *q) struct request *blk_do_flush(struct request_queue *q, struct request *rq) { + unsigned int fflags = q->flush_flags; /* may change, cache it */ + bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; + bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); + bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); unsigned skip = 0; - if (!(rq->cmd_flags & REQ_HARDBARRIER)) + /* + * Special case. If there's data but flush is not necessary, + * the request can be issued directly. + * + * Flush w/o data should be able to be issued directly too but + * currently some drivers assume that rq->bio contains + * non-zero data if it isn't NULL and empty FLUSH requests + * getting here usually have bio's without data. + */ + if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { + rq->cmd_flags &= ~REQ_FLUSH; + if (!has_fua) + rq->cmd_flags &= ~REQ_FUA; return rq; + } + /* + * Sequenced flushes can't be processed in parallel. If + * another one is already in progress, queue for later + * processing. + */ if (q->flush_seq) { - /* - * Sequenced flush is already in progress and they - * can't be processed in parallel. Queue for later - * processing. - */ list_move_tail(&rq->queuelist, &q->pending_flushes); return NULL; } - if (unlikely(q->next_ordered == QUEUE_ORDERED_NONE)) { - /* - * Queue ordering not supported. Terminate - * with prejudice. - */ - blk_dequeue_request(rq); - __blk_end_request_all(rq, -EOPNOTSUPP); - return NULL; - } - /* * Start a new flush sequence */ q->flush_err = 0; - q->ordered = q->next_ordered; q->flush_seq |= QUEUE_FSEQ_STARTED; - /* - * For an empty barrier, there's no actual BAR request, which - * in turn makes POSTFLUSH unnecessary. Mask them off. - */ - if (!blk_rq_sectors(rq)) - q->ordered &= ~(QUEUE_ORDERED_DO_BAR | - QUEUE_ORDERED_DO_POSTFLUSH); - - /* stash away the original request */ + /* adjust FLUSH/FUA of the original request and stash it away */ + rq->cmd_flags &= ~REQ_FLUSH; + if (!has_fua) + rq->cmd_flags &= ~REQ_FUA; blk_dequeue_request(rq); q->orig_flush_rq = rq; - if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) + /* skip unneded sequences and return the first one */ + if (!do_preflush) skip |= QUEUE_FSEQ_PREFLUSH; - - if (!(q->ordered & QUEUE_ORDERED_DO_BAR)) + if (!blk_rq_sectors(rq)) skip |= QUEUE_FSEQ_DATA; - - if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH)) + if (!do_postflush) skip |= QUEUE_FSEQ_POSTFLUSH; - - /* complete skipped sequences and return the first sequence */ return blk_flush_complete_seq(q, skip, 0); } diff --git a/block/blk.h b/block/blk.h index 24b92bd..a09c18b 100644 --- a/block/blk.h +++ b/block/blk.h @@ -60,6 +60,9 @@ static inline struct request *__elv_next_request(struct request_queue *q) while (1) { while (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); + if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || + rq == &q->flush_rq) + return rq; rq = blk_do_flush(q, rq); if (rq) return rq; diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 9192282..1797994 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -167,7 +167,7 @@ enum rq_flag_bits { (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \ - REQ_META| REQ_DISCARD | REQ_NOIDLE) + REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) #define REQ_UNPLUG (1 << __REQ_UNPLUG) #define REQ_RAHEAD (1 << __REQ_RAHEAD) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 1cd83ec..8ef705f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -357,7 +357,6 @@ struct request_queue /* * for flush operations */ - unsigned int ordered, next_ordered; unsigned int flush_flags; unsigned int flush_seq; int flush_err; @@ -465,40 +464,6 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) __clear_bit(flag, &q->queue_flags); } -enum { - /* - * Hardbarrier is supported with one of the following methods. - * - * NONE : hardbarrier unsupported - * DRAIN : ordering by draining is enough - * DRAIN_FLUSH : ordering by draining w/ pre and post flushes - * DRAIN_FUA : ordering by draining w/ pre flush and FUA write - */ - QUEUE_ORDERED_DO_PREFLUSH = 0x10, - QUEUE_ORDERED_DO_BAR = 0x20, - QUEUE_ORDERED_DO_POSTFLUSH = 0x40, - QUEUE_ORDERED_DO_FUA = 0x80, - - QUEUE_ORDERED_NONE = 0x00, - - QUEUE_ORDERED_DRAIN = QUEUE_ORDERED_DO_BAR, - QUEUE_ORDERED_DRAIN_FLUSH = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_POSTFLUSH, - QUEUE_ORDERED_DRAIN_FUA = QUEUE_ORDERED_DRAIN | - QUEUE_ORDERED_DO_PREFLUSH | - QUEUE_ORDERED_DO_FUA, - - /* - * FLUSH/FUA sequences. - */ - QUEUE_FSEQ_STARTED = (1 << 0), /* flushing in progress */ - QUEUE_FSEQ_PREFLUSH = (1 << 1), /* pre-flushing in progress */ - QUEUE_FSEQ_DATA = (1 << 2), /* data write in progress */ - QUEUE_FSEQ_POSTFLUSH = (1 << 3), /* post-flushing in progress */ - QUEUE_FSEQ_DONE = (1 << 4), -}; - #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) @@ -578,7 +543,8 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER) + (REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \ + REQ_FLUSH | REQ_FUA) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index ec94c12..fc999f5 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -32,7 +32,7 @@ enum bh_state_bits { BH_Delay, /* Buffer is not yet allocated on disk */ BH_Boundary, /* Block is followed by a discontiguity */ BH_Write_EIO, /* I/O error on write */ - BH_Eopnotsupp, /* operation not supported (barrier) */ + BH_Eopnotsupp, /* DEPRECATED: operation not supported (barrier) */ BH_Unwritten, /* Buffer is allocated on disk but not written */ BH_Quiet, /* Buffer Error Prinks to be quiet */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 76041b6..352c486 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -135,12 +135,13 @@ struct inodes_stat_t { * immediately after submission. The write equivalent * of READ_SYNC. * WRITE_ODIRECT_PLUG Special case write for O_DIRECT only. - * WRITE_BARRIER Like WRITE_SYNC, but tells the block layer that all - * previously submitted writes must be safely on storage - * before this one is started. Also guarantees that when - * this write is complete, it itself is also safely on - * storage. Prevents reordering of writes on both sides - * of this IO. + * WRITE_BARRIER DEPRECATED. Always fails. Use FLUSH/FUA instead. + * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush. + * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on + * non-volatile media on completion. + * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded + * by a cache flush and data is guaranteed to be on + * non-volatile media on completion. * */ #define RW_MASK REQ_WRITE @@ -158,6 +159,12 @@ struct inodes_stat_t { #define WRITE_META (WRITE | REQ_META) #define WRITE_BARRIER (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ REQ_HARDBARRIER) +#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FLUSH) +#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FUA) +#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ + REQ_FLUSH | REQ_FUA) /* * These aren't really reads or writes, they pass down information about -- cgit v1.1 From 1e87901e189c8f01750d67485009fe3827c691bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: filter flush bio's in __generic_make_request() There are a number of make_request based drivers which don't support cache flushes. Filter out flush bio's in __generic_make_request() so that they don't have to worry about them. All FLUSH/FUA requests with data are converted to regular IO requests and empty ones are completed immediately. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index 18455c4..495bdc4 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1509,6 +1509,19 @@ static inline void __generic_make_request(struct bio *bio) if (bio_check_eod(bio, nr_sectors)) goto end_io; + /* + * Filter flush bio's early so that make_request based + * drivers without flush support don't have to worry + * about them. + */ + if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) { + bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA); + if (!nr_sectors) { + err = 0; + goto end_io; + } + } + if ((bio->bi_rw & REQ_DISCARD) && (!blk_queue_discard(q) || ((bio->bi_rw & REQ_SECURE) && -- cgit v1.1 From cde4c406d8fb051c5aafc917643adbb9dbd0abc2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: simplify queue_next_fseq We need to call blk_rq_init and elv_insert for all cases in queue_next_fseq, so take these calls into common code. Also move the end_io initialization from queue_flush into queue_next_fseq and rename queue_flush to init_flush_request now that it's old name doesn't apply anymore. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-flush.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 452c552..72905f8 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -74,16 +74,11 @@ static void post_flush_end_io(struct request *rq, int error) blk_flush_complete_seq(rq->q, QUEUE_FSEQ_POSTFLUSH, error); } -static void queue_flush(struct request_queue *q, struct request *rq, - rq_end_io_fn *end_io) +static void init_flush_request(struct request *rq, struct gendisk *disk) { - blk_rq_init(q, rq); rq->cmd_type = REQ_TYPE_FS; rq->cmd_flags = REQ_FLUSH; - rq->rq_disk = q->orig_flush_rq->rq_disk; - rq->end_io = end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); + rq->rq_disk = disk; } static struct request *queue_next_fseq(struct request_queue *q) @@ -91,29 +86,28 @@ static struct request *queue_next_fseq(struct request_queue *q) struct request *orig_rq = q->orig_flush_rq; struct request *rq = &q->flush_rq; + blk_rq_init(q, rq); + switch (blk_flush_cur_seq(q)) { case QUEUE_FSEQ_PREFLUSH: - queue_flush(q, rq, pre_flush_end_io); + init_flush_request(rq, orig_rq->rq_disk); + rq->end_io = pre_flush_end_io; break; - case QUEUE_FSEQ_DATA: - /* initialize proxy request, inherit FLUSH/FUA and queue it */ - blk_rq_init(q, rq); init_request_from_bio(rq, orig_rq->bio); rq->cmd_flags &= ~(REQ_FLUSH | REQ_FUA); rq->cmd_flags |= orig_rq->cmd_flags & (REQ_FLUSH | REQ_FUA); rq->end_io = flush_data_end_io; - - elv_insert(q, rq, ELEVATOR_INSERT_FRONT); break; - case QUEUE_FSEQ_POSTFLUSH: - queue_flush(q, rq, post_flush_end_io); + init_flush_request(rq, orig_rq->rq_disk); + rq->end_io = post_flush_end_io; break; - default: BUG(); } + + elv_insert(q, rq, ELEVATOR_INSERT_FRONT); return rq; } -- cgit v1.1 From 337238be1bf52e1242f940fc6fe83fb395e55057 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: initialize flush request with WRITE_FLUSH instead of REQ_FLUSH init_flush_request() only set REQ_FLUSH when initializing flush requests making them READ requests. Use WRITE_FLUSH instead. Signed-off-by: Tejun Heo Reported-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-flush.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 72905f8..f357f1f 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -77,7 +77,7 @@ static void post_flush_end_io(struct request *rq, int error) static void init_flush_request(struct request *rq, struct gendisk *disk) { rq->cmd_type = REQ_TYPE_FS; - rq->cmd_flags = REQ_FLUSH; + rq->cmd_flags = WRITE_FLUSH; rq->rq_disk = disk; } -- cgit v1.1 From 47f70d5a6ca78c40a1c799d43506efbfed914f7b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: kick queue after sequencing REQ_FLUSH/FUA While completing a request from a REQ_FLUSH/FUA sequence, another request can be pushed to the request queue. If a driver tests elv_queue_empty() before completing a request and runs the queue again only if the queue wasn't empty, this may lead to hang. Please note that most drivers either kick the queue unconditionally or test queue emptiness after completing the current request and don't have this problem. This patch removes this possibility by making REQ_FLUSH/FUA sequence code kick the queue if the queue was empty before completing a request from REQ_FLUSH/FUA sequence. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-flush.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index f357f1f..cb4c844 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -56,22 +56,38 @@ static struct request *blk_flush_complete_seq(struct request_queue *q, return next_rq; } +static void blk_flush_complete_seq_end_io(struct request_queue *q, + unsigned seq, int error) +{ + bool was_empty = elv_queue_empty(q); + struct request *next_rq; + + next_rq = blk_flush_complete_seq(q, seq, error); + + /* + * Moving a request silently to empty queue_head may stall the + * queue. Kick the queue in those cases. + */ + if (was_empty && next_rq) + __blk_run_queue(q); +} + static void pre_flush_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_flush_complete_seq(rq->q, QUEUE_FSEQ_PREFLUSH, error); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_PREFLUSH, error); } static void flush_data_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_flush_complete_seq(rq->q, QUEUE_FSEQ_DATA, error); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_DATA, error); } static void post_flush_end_io(struct request *rq, int error) { elv_completed_request(rq->q, rq); - blk_flush_complete_seq(rq->q, QUEUE_FSEQ_POSTFLUSH, error); + blk_flush_complete_seq_end_io(rq->q, QUEUE_FSEQ_POSTFLUSH, error); } static void init_flush_request(struct request *rq, struct gendisk *disk) -- cgit v1.1 From 09d60c701b64b509f328cac72970eb894f485b9e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: make sure FSEQ_DATA request has the same rq_disk as the original rq->rq_disk and bio->bi_bdev->bd_disk may differ if a request has passed through remapping drivers. FSEQ_DATA request incorrectly followed bio->bi_bdev->bd_disk ending up being issued w/ mismatching rq_disk. Make it follow orig_rq->rq_disk. Signed-off-by: Tejun Heo Reported-by: Kiyoshi Ueda Tested-by: Kiyoshi Ueda Signed-off-by: Jens Axboe --- block/blk-flush.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/blk-flush.c b/block/blk-flush.c index cb4c844..7d1fc98 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -111,6 +111,13 @@ static struct request *queue_next_fseq(struct request_queue *q) break; case QUEUE_FSEQ_DATA: init_request_from_bio(rq, orig_rq->bio); + /* + * orig_rq->rq_disk may be different from + * bio->bi_bdev->bd_disk if orig_rq got here through + * remapping drivers. Make sure rq->rq_disk points + * to the same one as orig_rq. + */ + rq->rq_disk = orig_rq->rq_disk; rq->cmd_flags &= ~(REQ_FLUSH | REQ_FUA); rq->cmd_flags |= orig_rq->cmd_flags & (REQ_FLUSH | REQ_FUA); rq->end_io = flush_data_end_io; -- cgit v1.1 From 04ccc65cd1f57aee861708e08cd2272c5a0d088c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: update documentation for REQ_FLUSH / REQ_FUA Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- Documentation/block/00-INDEX | 4 +- Documentation/block/barrier.txt | 261 ------------------------ Documentation/block/writeback_cache_control.txt | 86 ++++++++ 3 files changed, 88 insertions(+), 263 deletions(-) delete mode 100644 Documentation/block/barrier.txt create mode 100644 Documentation/block/writeback_cache_control.txt diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index a406286..d111e3b 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -1,7 +1,5 @@ 00-INDEX - This file -barrier.txt - - I/O Barriers biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt @@ -16,3 +14,5 @@ stat.txt - Block layer statistics in /sys/block//stat switching-sched.txt - Switching I/O schedulers at runtime +writeback_cache_control.txt + - Control of volatile write back caches diff --git a/Documentation/block/barrier.txt b/Documentation/block/barrier.txt deleted file mode 100644 index 2c2f24f..0000000 --- a/Documentation/block/barrier.txt +++ /dev/null @@ -1,261 +0,0 @@ -I/O Barriers -============ -Tejun Heo , July 22 2005 - -I/O barrier requests are used to guarantee ordering around the barrier -requests. Unless you're crazy enough to use disk drives for -implementing synchronization constructs (wow, sounds interesting...), -the ordering is meaningful only for write requests for things like -journal checkpoints. All requests queued before a barrier request -must be finished (made it to the physical medium) before the barrier -request is started, and all requests queued after the barrier request -must be started only after the barrier request is finished (again, -made it to the physical medium). - -In other words, I/O barrier requests have the following two properties. - -1. Request ordering - -Requests cannot pass the barrier request. Preceding requests are -processed before the barrier and following requests after. - -Depending on what features a drive supports, this can be done in one -of the following three ways. - -i. For devices which have queue depth greater than 1 (TCQ devices) and -support ordered tags, block layer can just issue the barrier as an -ordered request and the lower level driver, controller and drive -itself are responsible for making sure that the ordering constraint is -met. Most modern SCSI controllers/drives should support this. - -NOTE: SCSI ordered tag isn't currently used due to limitation in the - SCSI midlayer, see the following random notes section. - -ii. For devices which have queue depth greater than 1 but don't -support ordered tags, block layer ensures that the requests preceding -a barrier request finishes before issuing the barrier request. Also, -it defers requests following the barrier until the barrier request is -finished. Older SCSI controllers/drives and SATA drives fall in this -category. - -iii. Devices which have queue depth of 1. This is a degenerate case -of ii. Just keeping issue order suffices. Ancient SCSI -controllers/drives and IDE drives are in this category. - -2. Forced flushing to physical medium - -Again, if you're not gonna do synchronization with disk drives (dang, -it sounds even more appealing now!), the reason you use I/O barriers -is mainly to protect filesystem integrity when power failure or some -other events abruptly stop the drive from operating and possibly make -the drive lose data in its cache. So, I/O barriers need to guarantee -that requests actually get written to non-volatile medium in order. - -There are four cases, - -i. No write-back cache. Keeping requests ordered is enough. - -ii. Write-back cache but no flush operation. There's no way to -guarantee physical-medium commit order. This kind of devices can't to -I/O barriers. - -iii. Write-back cache and flush operation but no FUA (forced unit -access). We need two cache flushes - before and after the barrier -request. - -iv. Write-back cache, flush operation and FUA. We still need one -flush to make sure requests preceding a barrier are written to medium, -but post-barrier flush can be avoided by using FUA write on the -barrier itself. - - -How to support barrier requests in drivers ------------------------------------------- - -All barrier handling is done inside block layer proper. All low level -drivers have to are implementing its prepare_flush_fn and using one -the following two functions to indicate what barrier type it supports -and how to prepare flush requests. Note that the term 'ordered' is -used to indicate the whole sequence of performing barrier requests -including draining and flushing. - -typedef void (prepare_flush_fn)(struct request_queue *q, struct request *rq); - -int blk_queue_ordered(struct request_queue *q, unsigned ordered, - prepare_flush_fn *prepare_flush_fn); - -@q : the queue in question -@ordered : the ordered mode the driver/device supports -@prepare_flush_fn : this function should prepare @rq such that it - flushes cache to physical medium when executed - -For example, SCSI disk driver's prepare_flush_fn looks like the -following. - -static void sd_prepare_flush(struct request_queue *q, struct request *rq) -{ - memset(rq->cmd, 0, sizeof(rq->cmd)); - rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->timeout = SD_TIMEOUT; - rq->cmd[0] = SYNCHRONIZE_CACHE; - rq->cmd_len = 10; -} - -The following seven ordered modes are supported. The following table -shows which mode should be used depending on what features a -device/driver supports. In the leftmost column of table, -QUEUE_ORDERED_ prefix is omitted from the mode names to save space. - -The table is followed by description of each mode. Note that in the -descriptions of QUEUE_ORDERED_DRAIN*, '=>' is used whereas '->' is -used for QUEUE_ORDERED_TAG* descriptions. '=>' indicates that the -preceding step must be complete before proceeding to the next step. -'->' indicates that the next step can start as soon as the previous -step is issued. - - write-back cache ordered tag flush FUA ------------------------------------------------------------------------ -NONE yes/no N/A no N/A -DRAIN no no N/A N/A -DRAIN_FLUSH yes no yes no -DRAIN_FUA yes no yes yes -TAG no yes N/A N/A -TAG_FLUSH yes yes yes no -TAG_FUA yes yes yes yes - - -QUEUE_ORDERED_NONE - I/O barriers are not needed and/or supported. - - Sequence: N/A - -QUEUE_ORDERED_DRAIN - Requests are ordered by draining the request queue and cache - flushing isn't needed. - - Sequence: drain => barrier - -QUEUE_ORDERED_DRAIN_FLUSH - Requests are ordered by draining the request queue and both - pre-barrier and post-barrier cache flushings are needed. - - Sequence: drain => preflush => barrier => postflush - -QUEUE_ORDERED_DRAIN_FUA - Requests are ordered by draining the request queue and - pre-barrier cache flushing is needed. By using FUA on barrier - request, post-barrier flushing can be skipped. - - Sequence: drain => preflush => barrier - -QUEUE_ORDERED_TAG - Requests are ordered by ordered tag and cache flushing isn't - needed. - - Sequence: barrier - -QUEUE_ORDERED_TAG_FLUSH - Requests are ordered by ordered tag and both pre-barrier and - post-barrier cache flushings are needed. - - Sequence: preflush -> barrier -> postflush - -QUEUE_ORDERED_TAG_FUA - Requests are ordered by ordered tag and pre-barrier cache - flushing is needed. By using FUA on barrier request, - post-barrier flushing can be skipped. - - Sequence: preflush -> barrier - - -Random notes/caveats --------------------- - -* SCSI layer currently can't use TAG ordering even if the drive, -controller and driver support it. The problem is that SCSI midlayer -request dispatch function is not atomic. It releases queue lock and -switch to SCSI host lock during issue and it's possible and likely to -happen in time that requests change their relative positions. Once -this problem is solved, TAG ordering can be enabled. - -* Currently, no matter which ordered mode is used, there can be only -one barrier request in progress. All I/O barriers are held off by -block layer until the previous I/O barrier is complete. This doesn't -make any difference for DRAIN ordered devices, but, for TAG ordered -devices with very high command latency, passing multiple I/O barriers -to low level *might* be helpful if they are very frequent. Well, this -certainly is a non-issue. I'm writing this just to make clear that no -two I/O barrier is ever passed to low-level driver. - -* Completion order. Requests in ordered sequence are issued in order -but not required to finish in order. Barrier implementation can -handle out-of-order completion of ordered sequence. IOW, the requests -MUST be processed in order but the hardware/software completion paths -are allowed to reorder completion notifications - eg. current SCSI -midlayer doesn't preserve completion order during error handling. - -* Requeueing order. Low-level drivers are free to requeue any request -after they removed it from the request queue with -blkdev_dequeue_request(). As barrier sequence should be kept in order -when requeued, generic elevator code takes care of putting requests in -order around barrier. See blk_ordered_req_seq() and -ELEVATOR_INSERT_REQUEUE handling in __elv_add_request() for details. - -Note that block drivers must not requeue preceding requests while -completing latter requests in an ordered sequence. Currently, no -error checking is done against this. - -* Error handling. Currently, block layer will report error to upper -layer if any of requests in an ordered sequence fails. Unfortunately, -this doesn't seem to be enough. Look at the following request flow. -QUEUE_ORDERED_TAG_FLUSH is in use. - - [0] [1] [2] [3] [pre] [barrier] [post] < [4] [5] [6] ... > - still in elevator - -Let's say request [2], [3] are write requests to update file system -metadata (journal or whatever) and [barrier] is used to mark that -those updates are valid. Consider the following sequence. - - i. Requests [0] ~ [post] leaves the request queue and enters - low-level driver. - ii. After a while, unfortunately, something goes wrong and the - drive fails [2]. Note that any of [0], [1] and [3] could have - completed by this time, but [pre] couldn't have been finished - as the drive must process it in order and it failed before - processing that command. - iii. Error handling kicks in and determines that the error is - unrecoverable and fails [2], and resumes operation. - iv. [pre] [barrier] [post] gets processed. - v. *BOOM* power fails - -The problem here is that the barrier request is *supposed* to indicate -that filesystem update requests [2] and [3] made it safely to the -physical medium and, if the machine crashes after the barrier is -written, filesystem recovery code can depend on that. Sadly, that -isn't true in this case anymore. IOW, the success of a I/O barrier -should also be dependent on success of some of the preceding requests, -where only upper layer (filesystem) knows what 'some' is. - -This can be solved by implementing a way to tell the block layer which -requests affect the success of the following barrier request and -making lower lever drivers to resume operation on error only after -block layer tells it to do so. - -As the probability of this happening is very low and the drive should -be faulty, implementing the fix is probably an overkill. But, still, -it's there. - -* In previous drafts of barrier implementation, there was fallback -mechanism such that, if FUA or ordered TAG fails, less fancy ordered -mode can be selected and the failed barrier request is retried -automatically. The rationale for this feature was that as FUA is -pretty new in ATA world and ordered tag was never used widely, there -could be devices which report to support those features but choke when -actually given such requests. - - This was removed for two reasons 1. it's an overkill 2. it's -impossible to implement properly when TAG ordering is used as low -level drivers resume after an error automatically. If it's ever -needed adding it back and modifying low level drivers accordingly -shouldn't be difficult. diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.txt new file mode 100644 index 0000000..83407d3 --- /dev/null +++ b/Documentation/block/writeback_cache_control.txt @@ -0,0 +1,86 @@ + +Explicit volatile write back cache control +===================================== + +Introduction +------------ + +Many storage devices, especially in the consumer market, come with volatile +write back caches. That means the devices signal I/O completion to the +operating system before data actually has hit the non-volatile storage. This +behavior obviously speeds up various workloads, but it means the operating +system needs to force data out to the non-volatile storage when it performs +a data integrity operation like fsync, sync or an unmount. + +The Linux block layer provides two simple mechanisms that let filesystems +control the caching behavior of the storage device. These mechanisms are +a forced cache flush, and the Force Unit Access (FUA) flag for requests. + + +Explicit cache flushes +---------------------- + +The REQ_FLUSH flag can be OR ed into the r/w flags of a bio submitted from +the filesystem and will make sure the volatile cache of the storage device +has been flushed before the actual I/O operation is started. This explicitly +guarantees that previously completed write requests are on non-volatile +storage before the flagged bio starts. In addition the REQ_FLUSH flag can be +set on an otherwise empty bio structure, which causes only an explicit cache +flush without any dependent I/O. It is recommend to use +the blkdev_issue_flush() helper for a pure cache flush. + + +Forced Unit Access +----------------- + +The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the +filesystem and will make sure that I/O completion for this request is only +signaled after the data has been committed to non-volatile storage. + + +Implementation details for filesystems +-------------------------------------- + +Filesystems can simply set the REQ_FLUSH and REQ_FUA bits and do not have to +worry if the underlying devices need any explicit cache flushing and how +the Forced Unit Access is implemented. The REQ_FLUSH and REQ_FUA flags +may both be set on a single bio. + + +Implementation details for make_request_fn based block drivers +-------------------------------------------------------------- + +These drivers will always see the REQ_FLUSH and REQ_FUA bits as they sit +directly below the submit_bio interface. For remapping drivers the REQ_FUA +bits need to be propagated to underlying devices, and a global flush needs +to be implemented for bios with the REQ_FLUSH bit set. For real device +drivers that do not have a volatile cache the REQ_FLUSH and REQ_FUA bits +on non-empty bios can simply be ignored, and REQ_FLUSH requests without +data can be completed successfully without doing any work. Drivers for +devices with volatile caches need to implement the support for these +flags themselves without any help from the block layer. + + +Implementation details for request_fn based block drivers +-------------------------------------------------------------- + +For devices that do not support volatile write caches there is no driver +support required, the block layer completes empty REQ_FLUSH requests before +entering the driver and strips off the REQ_FLUSH and REQ_FUA bits from +requests that have a payload. For devices with volatile write caches the +driver needs to tell the block layer that it supports flushing caches by +doing: + + blk_queue_flush(sdkp->disk->queue, REQ_FLUSH); + +and handle empty REQ_FLUSH requests in its prep_fn/request_fn. Note that +REQ_FLUSH requests with a payload are automatically turned into a sequence +of an empty REQ_FLUSH request followed by the actual write by the block +layer. For devices that also support the FUA bit the block layer needs +to be told to pass through the REQ_FUA bit using: + + blk_queue_flush(sdkp->disk->queue, REQ_FLUSH | REQ_FUA); + +and the driver must handle write requests that have the REQ_FUA bit set +in prep_fn/request_fn. If the FUA bit is not natively supported the block +layer turns it into an empty REQ_FLUSH request after the actual write. -- cgit v1.1 From d391a2dda2f1c993f094bdb3a8a342c5e0546553 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block: use REQ_FLUSH in blkdev_issue_flush() Update blkdev_issue_flush() to use new REQ_FLUSH interface. Signed-off-by: Tejun Heo Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-flush.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 7d1fc98..62b7df9 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -191,13 +191,10 @@ struct request *blk_do_flush(struct request_queue *q, struct request *rq) return blk_flush_complete_seq(q, skip, 0); } -static void bio_end_empty_barrier(struct bio *bio, int err) +static void bio_end_flush(struct bio *bio, int err) { - if (err) { - if (err == -EOPNOTSUPP) - set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); + if (err) clear_bit(BIO_UPTODATE, &bio->bi_flags); - } if (bio->bi_private) complete(bio->bi_private); bio_put(bio); @@ -235,19 +232,19 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, * some block devices may not have their queue correctly set up here * (e.g. loop device without a backing file) and so issuing a flush * here will panic. Ensure there is a request function before issuing - * the barrier. + * the flush. */ if (!q->make_request_fn) return -ENXIO; bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_empty_barrier; + bio->bi_end_io = bio_end_flush; bio->bi_bdev = bdev; if (test_bit(BLKDEV_WAIT, &flags)) bio->bi_private = &wait; bio_get(bio); - submit_bio(WRITE_BARRIER, bio); + submit_bio(WRITE_FLUSH, bio); if (test_bit(BLKDEV_WAIT, &flags)) { wait_for_completion(&wait); /* @@ -259,9 +256,7 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, *error_sector = bio->bi_sector; } - if (bio_flagged(bio, BIO_EOPNOTSUPP)) - ret = -EOPNOTSUPP; - else if (!bio_flagged(bio, BIO_UPTODATE)) + if (!bio_flagged(bio, BIO_UPTODATE)) ret = -EIO; bio_put(bio); -- cgit v1.1 From 6259f28459a9de820f47a9ece4ffa22d4596a9af Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:17 +0200 Subject: block/loop: implement REQ_FLUSH/FUA support Deprecate REQ_HARDBARRIER and implement REQ_FLUSH/FUA instead. Also, instead of checking file->f_op->fsync() directly, look at the value of vfs_fsync() and ignore -EINVAL return. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/loop.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 953d1e1..5d27bc6 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -477,17 +477,17 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset; if (bio_rw(bio) == WRITE) { - bool barrier = (bio->bi_rw & REQ_HARDBARRIER); struct file *file = lo->lo_backing_file; - if (barrier) { - if (unlikely(!file->f_op->fsync)) { - ret = -EOPNOTSUPP; - goto out; - } + /* REQ_HARDBARRIER is deprecated */ + if (bio->bi_rw & REQ_HARDBARRIER) { + ret = -EOPNOTSUPP; + goto out; + } + if (bio->bi_rw & REQ_FLUSH) { ret = vfs_fsync(file, 0); - if (unlikely(ret)) { + if (unlikely(ret && ret != -EINVAL)) { ret = -EIO; goto out; } @@ -495,9 +495,9 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) ret = lo_send(lo, bio, pos); - if (barrier && !ret) { + if ((bio->bi_rw & REQ_FUA) && !ret) { ret = vfs_fsync(file, 0); - if (unlikely(ret)) + if (unlikely(ret && ret != -EINVAL)) ret = -EIO; } } else -- cgit v1.1 From 02c42b7a68695c2c3e3fecf9f6b9a4ea43abe52f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:18 +0200 Subject: virtio_blk: drop REQ_HARDBARRIER support Remove now unused REQ_HARDBARRIER support. virtio_blk already supports REQ_FLUSH and the usefulness of REQ_FUA for virtio_blk is questionable at this point, so there's nothing else to do to support new REQ_FLUSH/FUA interface. Signed-off-by: Tejun Heo Cc: Michael S. Tsirkin Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index d10b635..1260628 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -128,9 +128,6 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, } } - if (vbr->req->cmd_flags & REQ_HARDBARRIER) - vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER; - sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr)); /* @@ -388,13 +385,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) vblk->disk->driverfs_dev = &vdev->dev; index++; - /* - * If the FLUSH feature is supported we do have support for - * flushing a volatile write cache on the host. Use that to - * implement write barrier support; otherwise, we must assume - * that the host does not perform any kind of volatile write - * caching. - */ + /* configure queue flush support */ if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) blk_queue_flush(q, REQ_FLUSH); @@ -515,9 +506,9 @@ static const struct virtio_device_id id_table[] = { }; static unsigned int features[] = { - VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, - VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY + VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, VIRTIO_BLK_F_SCSI, + VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY }; /* -- cgit v1.1 From 7bc9fddab074d6bb630344e1969e28d20b140621 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:18 +0200 Subject: lguest: replace VIRTIO_F_BARRIER support with VIRTIO_F_FLUSH support VIRTIO_F_BARRIER is deprecated. Replace it with VIRTIO_F_FLUSH support. Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- Documentation/lguest/lguest.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index e9ce3c5..fbc64b3 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1639,15 +1639,6 @@ static void blk_request(struct virtqueue *vq) off = out->sector * 512; /* - * The block device implements "barriers", where the Guest indicates - * that it wants all previous writes to occur before this write. We - * don't have a way of asking our kernel to do a barrier, so we just - * synchronize all the data in the file. Pretty poor, no? - */ - if (out->type & VIRTIO_BLK_T_BARRIER) - fdatasync(vblk->fd); - - /* * In general the virtio block driver is allowed to try SCSI commands. * It'd be nice if we supported eject, for example, but we don't. */ @@ -1679,6 +1670,13 @@ static void blk_request(struct virtqueue *vq) /* Die, bad Guest, die. */ errx(1, "Write past end %llu+%u", off, ret); } + + wlen = sizeof(*in); + *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR); + } else if (out->type & VIRTIO_BLK_T_FLUSH) { + /* Flush */ + ret = fdatasync(vblk->fd); + verbose("FLUSH fdatasync: %i\n", ret); wlen = sizeof(*in); *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR); } else { @@ -1702,15 +1700,6 @@ static void blk_request(struct virtqueue *vq) } } - /* - * OK, so we noted that it was pretty poor to use an fdatasync as a - * barrier. But Christoph Hellwig points out that we need a sync - * *afterwards* as well: "Barriers specify no reordering to the front - * or the back." And Jens Axboe confirmed it, so here we are: - */ - if (out->type & VIRTIO_BLK_T_BARRIER) - fdatasync(vblk->fd); - /* Finished that request. */ add_used(vq, head, wlen); } @@ -1735,8 +1724,8 @@ static void setup_block_file(const char *filename) vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE); vblk->len = lseek64(vblk->fd, 0, SEEK_END); - /* We support barriers. */ - add_feature(dev, VIRTIO_BLK_F_BARRIER); + /* We support FLUSH. */ + add_feature(dev, VIRTIO_BLK_F_FLUSH); /* Tell Guest how many sectors this device has. */ conf.capacity = cpu_to_le64(vblk->len / 512); -- cgit v1.1 From e9c7469bb4f502dafc092166201bea1ad5fc0fbf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:18 +0200 Subject: md: implment REQ_FLUSH/FUA support This patch converts md to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. In the core part (md.c), the following changes are notable. * Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with processing of other requests and thus there is no reason to mark the queue congested while FLUSH/FUA is in progress. * REQ_FLUSH/FUA failures are final and its users don't need retry logic. Retry logic is removed. * Preflush needs to be issued to all member devices but FUA writes can be handled the same way as other writes - their processing can be deferred to request_queue of member devices. md_barrier_request() is renamed to md_flush_request() and simplified accordingly. For linear, raid0 and multipath, the core changes are enough. raid1, 5 and 10 need the following conversions. * raid1: Handling of FLUSH/FUA bio's can simply be deferred to request_queues of member devices. Barrier related logic removed. * raid5: Queue draining logic dropped. FUA bit is propagated through biodrain and stripe resconstruction such that all the updated parts of the stripe are written out with FUA writes if any of the dirtying writes was FUA. preread_active_stripes handling in make_request() is updated as suggested by Neil Brown. * raid10: FUA bit needs to be propagated to write clones. linear, raid0, 1, 5 and 10 tested. Signed-off-by: Tejun Heo Reviewed-by: Neil Brown Signed-off-by: Jens Axboe --- drivers/md/linear.c | 4 +- drivers/md/md.c | 117 +++++++------------------------- drivers/md/md.h | 23 ++----- drivers/md/multipath.c | 4 +- drivers/md/raid0.c | 4 +- drivers/md/raid1.c | 176 +++++++++++++++++-------------------------------- drivers/md/raid1.h | 2 - drivers/md/raid10.c | 7 +- drivers/md/raid5.c | 43 ++++++------ drivers/md/raid5.h | 1 + 10 files changed, 122 insertions(+), 259 deletions(-) diff --git a/drivers/md/linear.c b/drivers/md/linear.c index ba19060..8a2f767 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -294,8 +294,8 @@ static int linear_make_request (mddev_t *mddev, struct bio *bio) dev_info_t *tmp_dev; sector_t start_sector; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/md.c b/drivers/md/md.c index c148b63..3640f02 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -226,12 +226,12 @@ static int md_make_request(struct request_queue *q, struct bio *bio) return 0; } rcu_read_lock(); - if (mddev->suspended || mddev->barrier) { + if (mddev->suspended) { DEFINE_WAIT(__wait); for (;;) { prepare_to_wait(&mddev->sb_wait, &__wait, TASK_UNINTERRUPTIBLE); - if (!mddev->suspended && !mddev->barrier) + if (!mddev->suspended) break; rcu_read_unlock(); schedule(); @@ -282,40 +282,29 @@ EXPORT_SYMBOL_GPL(mddev_resume); int mddev_congested(mddev_t *mddev, int bits) { - if (mddev->barrier) - return 1; return mddev->suspended; } EXPORT_SYMBOL(mddev_congested); /* - * Generic barrier handling for md + * Generic flush handling for md */ -#define POST_REQUEST_BARRIER ((void*)1) - -static void md_end_barrier(struct bio *bio, int err) +static void md_end_flush(struct bio *bio, int err) { mdk_rdev_t *rdev = bio->bi_private; mddev_t *mddev = rdev->mddev; - if (err == -EOPNOTSUPP && mddev->barrier != POST_REQUEST_BARRIER) - set_bit(BIO_EOPNOTSUPP, &mddev->barrier->bi_flags); rdev_dec_pending(rdev, mddev); if (atomic_dec_and_test(&mddev->flush_pending)) { - if (mddev->barrier == POST_REQUEST_BARRIER) { - /* This was a post-request barrier */ - mddev->barrier = NULL; - wake_up(&mddev->sb_wait); - } else - /* The pre-request barrier has finished */ - schedule_work(&mddev->barrier_work); + /* The pre-request flush has finished */ + schedule_work(&mddev->flush_work); } bio_put(bio); } -static void submit_barriers(mddev_t *mddev) +static void submit_flushes(mddev_t *mddev) { mdk_rdev_t *rdev; @@ -332,60 +321,56 @@ static void submit_barriers(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); bi = bio_alloc(GFP_KERNEL, 0); - bi->bi_end_io = md_end_barrier; + bi->bi_end_io = md_end_flush; bi->bi_private = rdev; bi->bi_bdev = rdev->bdev; atomic_inc(&mddev->flush_pending); - submit_bio(WRITE_BARRIER, bi); + submit_bio(WRITE_FLUSH, bi); rcu_read_lock(); rdev_dec_pending(rdev, mddev); } rcu_read_unlock(); } -static void md_submit_barrier(struct work_struct *ws) +static void md_submit_flush_data(struct work_struct *ws) { - mddev_t *mddev = container_of(ws, mddev_t, barrier_work); - struct bio *bio = mddev->barrier; + mddev_t *mddev = container_of(ws, mddev_t, flush_work); + struct bio *bio = mddev->flush_bio; atomic_set(&mddev->flush_pending, 1); - if (test_bit(BIO_EOPNOTSUPP, &bio->bi_flags)) - bio_endio(bio, -EOPNOTSUPP); - else if (bio->bi_size == 0) + if (bio->bi_size == 0) /* an empty barrier - all done */ bio_endio(bio, 0); else { - bio->bi_rw &= ~REQ_HARDBARRIER; + bio->bi_rw &= ~REQ_FLUSH; if (mddev->pers->make_request(mddev, bio)) generic_make_request(bio); - mddev->barrier = POST_REQUEST_BARRIER; - submit_barriers(mddev); } if (atomic_dec_and_test(&mddev->flush_pending)) { - mddev->barrier = NULL; + mddev->flush_bio = NULL; wake_up(&mddev->sb_wait); } } -void md_barrier_request(mddev_t *mddev, struct bio *bio) +void md_flush_request(mddev_t *mddev, struct bio *bio) { spin_lock_irq(&mddev->write_lock); wait_event_lock_irq(mddev->sb_wait, - !mddev->barrier, + !mddev->flush_bio, mddev->write_lock, /*nothing*/); - mddev->barrier = bio; + mddev->flush_bio = bio; spin_unlock_irq(&mddev->write_lock); atomic_set(&mddev->flush_pending, 1); - INIT_WORK(&mddev->barrier_work, md_submit_barrier); + INIT_WORK(&mddev->flush_work, md_submit_flush_data); - submit_barriers(mddev); + submit_flushes(mddev); if (atomic_dec_and_test(&mddev->flush_pending)) - schedule_work(&mddev->barrier_work); + schedule_work(&mddev->flush_work); } -EXPORT_SYMBOL(md_barrier_request); +EXPORT_SYMBOL(md_flush_request); /* Support for plugging. * This mirrors the plugging support in request_queue, but does not @@ -696,31 +681,6 @@ static void super_written(struct bio *bio, int error) bio_put(bio); } -static void super_written_barrier(struct bio *bio, int error) -{ - struct bio *bio2 = bio->bi_private; - mdk_rdev_t *rdev = bio2->bi_private; - mddev_t *mddev = rdev->mddev; - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags) && - error == -EOPNOTSUPP) { - unsigned long flags; - /* barriers don't appear to be supported :-( */ - set_bit(BarriersNotsupp, &rdev->flags); - mddev->barriers_work = 0; - spin_lock_irqsave(&mddev->write_lock, flags); - bio2->bi_next = mddev->biolist; - mddev->biolist = bio2; - spin_unlock_irqrestore(&mddev->write_lock, flags); - wake_up(&mddev->sb_wait); - bio_put(bio); - } else { - bio_put(bio2); - bio->bi_private = rdev; - super_written(bio, error); - } -} - void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, sector_t sector, int size, struct page *page) { @@ -729,51 +689,28 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * and decrement it on completion, waking up sb_wait * if zero is reached. * If an error occurred, call md_error - * - * As we might need to resubmit the request if REQ_HARDBARRIER - * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = REQ_WRITE | REQ_SYNC | REQ_UNPLUG; bio->bi_bdev = rdev->bdev; bio->bi_sector = sector; bio_add_page(bio, page, size, 0); bio->bi_private = rdev; bio->bi_end_io = super_written; - bio->bi_rw = rw; atomic_inc(&mddev->pending_writes); - if (!test_bit(BarriersNotsupp, &rdev->flags)) { - struct bio *rbio; - rw |= REQ_HARDBARRIER; - rbio = bio_clone(bio, GFP_NOIO); - rbio->bi_private = bio; - rbio->bi_end_io = super_written_barrier; - submit_bio(rw, rbio); - } else - submit_bio(rw, bio); + submit_bio(REQ_WRITE | REQ_SYNC | REQ_UNPLUG | REQ_FLUSH | REQ_FUA, + bio); } void md_super_wait(mddev_t *mddev) { - /* wait for all superblock writes that were scheduled to complete. - * if any had to be retried (due to BARRIER problems), retry them - */ + /* wait for all superblock writes that were scheduled to complete */ DEFINE_WAIT(wq); for(;;) { prepare_to_wait(&mddev->sb_wait, &wq, TASK_UNINTERRUPTIBLE); if (atomic_read(&mddev->pending_writes)==0) break; - while (mddev->biolist) { - struct bio *bio; - spin_lock_irq(&mddev->write_lock); - bio = mddev->biolist; - mddev->biolist = bio->bi_next ; - bio->bi_next = NULL; - spin_unlock_irq(&mddev->write_lock); - submit_bio(bio->bi_rw, bio); - } schedule(); } finish_wait(&mddev->sb_wait, &wq); @@ -1070,7 +1007,6 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) clear_bit(Faulty, &rdev->flags); clear_bit(In_sync, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); - clear_bit(BarriersNotsupp, &rdev->flags); if (mddev->raid_disks == 0) { mddev->major_version = 0; @@ -1485,7 +1421,6 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev) clear_bit(Faulty, &rdev->flags); clear_bit(In_sync, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); - clear_bit(BarriersNotsupp, &rdev->flags); if (mddev->raid_disks == 0) { mddev->major_version = 1; @@ -4506,7 +4441,6 @@ int md_run(mddev_t *mddev) /* may be over-ridden by personality */ mddev->resync_max_sectors = mddev->dev_sectors; - mddev->barriers_work = 1; mddev->ok_start_degraded = start_dirty_degraded; if (start_readonly && mddev->ro == 0) @@ -4685,7 +4619,6 @@ static void md_clean(mddev_t *mddev) mddev->recovery = 0; mddev->in_sync = 0; mddev->degraded = 0; - mddev->barriers_work = 0; mddev->safemode = 0; mddev->bitmap_info.offset = 0; mddev->bitmap_info.default_offset = 0; diff --git a/drivers/md/md.h b/drivers/md/md.h index a953fe2..d8e2ab2 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -87,7 +87,6 @@ struct mdk_rdev_s #define Faulty 1 /* device is known to have a fault */ #define In_sync 2 /* device is in_sync with rest of array */ #define WriteMostly 4 /* Avoid reading if at all possible */ -#define BarriersNotsupp 5 /* REQ_HARDBARRIER is not supported */ #define AllReserved 6 /* If whole device is reserved for * one array */ #define AutoDetected 7 /* added by auto-detect */ @@ -273,13 +272,6 @@ struct mddev_s int degraded; /* whether md should consider * adding a spare */ - int barriers_work; /* initialised to true, cleared as soon - * as a barrier request to slave - * fails. Only supported - */ - struct bio *biolist; /* bios that need to be retried - * because REQ_HARDBARRIER is not supported - */ atomic_t recovery_active; /* blocks scheduled, but not written */ wait_queue_head_t recovery_wait; @@ -339,16 +331,13 @@ struct mddev_s struct attribute_group *to_remove; struct plug_handle *plug; /* if used by personality */ - /* Generic barrier handling. - * If there is a pending barrier request, all other - * writes are blocked while the devices are flushed. - * The last to finish a flush schedules a worker to - * submit the barrier request (without the barrier flag), - * then submit more flush requests. + /* Generic flush handling. + * The last to finish preflush schedules a worker to submit + * the rest of the request (without the REQ_FLUSH flag). */ - struct bio *barrier; + struct bio *flush_bio; atomic_t flush_pending; - struct work_struct barrier_work; + struct work_struct flush_work; struct work_struct event_work; /* used by dm to report failure event */ }; @@ -502,7 +491,7 @@ extern void md_done_sync(mddev_t *mddev, int blocks, int ok); extern void md_error(mddev_t *mddev, mdk_rdev_t *rdev); extern int mddev_congested(mddev_t *mddev, int bits); -extern void md_barrier_request(mddev_t *mddev, struct bio *bio); +extern void md_flush_request(mddev_t *mddev, struct bio *bio); extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, sector_t sector, int size, struct page *page); extern void md_super_wait(mddev_t *mddev); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 0307d21..6d7ddf3 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -142,8 +142,8 @@ static int multipath_make_request(mddev_t *mddev, struct bio * bio) struct multipath_bh * mp_bh; struct multipath_info *multipath; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 6f7af46..a39f4c3 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -483,8 +483,8 @@ static int raid0_make_request(mddev_t *mddev, struct bio *bio) struct strip_zone *zone; mdk_rdev_t *tmp_dev; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index ad83a4d..886a9d8 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -319,83 +319,74 @@ static void raid1_end_write_request(struct bio *bio, int error) if (r1_bio->bios[mirror] == bio) break; - if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) { - set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags); - set_bit(R1BIO_BarrierRetry, &r1_bio->state); - r1_bio->mddev->barriers_work = 0; - /* Don't rdev_dec_pending in this branch - keep it for the retry */ - } else { + /* + * 'one mirror IO has finished' event handler: + */ + r1_bio->bios[mirror] = NULL; + to_put = bio; + if (!uptodate) { + md_error(r1_bio->mddev, conf->mirrors[mirror].rdev); + /* an I/O failed, we can't clear the bitmap */ + set_bit(R1BIO_Degraded, &r1_bio->state); + } else /* - * this branch is our 'one mirror IO has finished' event handler: + * Set R1BIO_Uptodate in our master bio, so that we + * will return a good error code for to the higher + * levels even if IO on some other mirrored buffer + * fails. + * + * The 'master' represents the composite IO operation + * to user-side. So if something waits for IO, then it + * will wait for the 'master' bio. */ - r1_bio->bios[mirror] = NULL; - to_put = bio; - if (!uptodate) { - md_error(r1_bio->mddev, conf->mirrors[mirror].rdev); - /* an I/O failed, we can't clear the bitmap */ - set_bit(R1BIO_Degraded, &r1_bio->state); - } else - /* - * Set R1BIO_Uptodate in our master bio, so that - * we will return a good error code for to the higher - * levels even if IO on some other mirrored buffer fails. - * - * The 'master' represents the composite IO operation to - * user-side. So if something waits for IO, then it will - * wait for the 'master' bio. - */ - set_bit(R1BIO_Uptodate, &r1_bio->state); - - update_head_pos(mirror, r1_bio); - - if (behind) { - if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) - atomic_dec(&r1_bio->behind_remaining); - - /* In behind mode, we ACK the master bio once the I/O has safely - * reached all non-writemostly disks. Setting the Returned bit - * ensures that this gets done only once -- we don't ever want to - * return -EIO here, instead we'll wait */ - - if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && - test_bit(R1BIO_Uptodate, &r1_bio->state)) { - /* Maybe we can return now */ - if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { - struct bio *mbio = r1_bio->master_bio; - PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n", - (unsigned long long) mbio->bi_sector, - (unsigned long long) mbio->bi_sector + - (mbio->bi_size >> 9) - 1); - bio_endio(mbio, 0); - } + set_bit(R1BIO_Uptodate, &r1_bio->state); + + update_head_pos(mirror, r1_bio); + + if (behind) { + if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) + atomic_dec(&r1_bio->behind_remaining); + + /* + * In behind mode, we ACK the master bio once the I/O + * has safely reached all non-writemostly + * disks. Setting the Returned bit ensures that this + * gets done only once -- we don't ever want to return + * -EIO here, instead we'll wait + */ + if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && + test_bit(R1BIO_Uptodate, &r1_bio->state)) { + /* Maybe we can return now */ + if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { + struct bio *mbio = r1_bio->master_bio; + PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n", + (unsigned long long) mbio->bi_sector, + (unsigned long long) mbio->bi_sector + + (mbio->bi_size >> 9) - 1); + bio_endio(mbio, 0); } } - rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); } + rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); + /* - * * Let's see if all mirrored write operations have finished * already. */ if (atomic_dec_and_test(&r1_bio->remaining)) { - if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) - reschedule_retry(r1_bio); - else { - /* it really is the end of this request */ - if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { - /* free extra copy of the data pages */ - int i = bio->bi_vcnt; - while (i--) - safe_put_page(bio->bi_io_vec[i].bv_page); - } - /* clear the bitmap if all writes complete successfully */ - bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, - r1_bio->sectors, - !test_bit(R1BIO_Degraded, &r1_bio->state), - behind); - md_write_end(r1_bio->mddev); - raid_end_bio_io(r1_bio); + if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { + /* free extra copy of the data pages */ + int i = bio->bi_vcnt; + while (i--) + safe_put_page(bio->bi_io_vec[i].bv_page); } + /* clear the bitmap if all writes complete successfully */ + bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, + r1_bio->sectors, + !test_bit(R1BIO_Degraded, &r1_bio->state), + behind); + md_write_end(r1_bio->mddev); + raid_end_bio_io(r1_bio); } if (to_put) @@ -788,16 +779,13 @@ static int make_request(mddev_t *mddev, struct bio * bio) struct page **behind_pages = NULL; const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); - unsigned long do_barriers; + const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA)); mdk_rdev_t *blocked_rdev; /* * Register the new request and wait if the reconstruction * thread has put up a bar for new requests. * Continue immediately if no resync is active currently. - * We test barriers_work *after* md_write_start as md_write_start - * may cause the first superblock write, and that will check out - * if barriers work. */ md_write_start(mddev, bio); /* wait on superblock update early */ @@ -821,13 +809,6 @@ static int make_request(mddev_t *mddev, struct bio * bio) } finish_wait(&conf->wait_barrier, &w); } - if (unlikely(!mddev->barriers_work && - (bio->bi_rw & REQ_HARDBARRIER))) { - if (rw == WRITE) - md_write_end(mddev); - bio_endio(bio, -EOPNOTSUPP); - return 0; - } wait_barrier(conf); @@ -959,10 +940,6 @@ static int make_request(mddev_t *mddev, struct bio * bio) atomic_set(&r1_bio->remaining, 0); atomic_set(&r1_bio->behind_remaining, 0); - do_barriers = bio->bi_rw & REQ_HARDBARRIER; - if (do_barriers) - set_bit(R1BIO_Barrier, &r1_bio->state); - bio_list_init(&bl); for (i = 0; i < disks; i++) { struct bio *mbio; @@ -975,7 +952,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset; mbio->bi_bdev = conf->mirrors[i].rdev->bdev; mbio->bi_end_io = raid1_end_write_request; - mbio->bi_rw = WRITE | do_barriers | do_sync; + mbio->bi_rw = WRITE | do_flush_fua | do_sync; mbio->bi_private = r1_bio; if (behind_pages) { @@ -1634,41 +1611,6 @@ static void raid1d(mddev_t *mddev) if (test_bit(R1BIO_IsSync, &r1_bio->state)) { sync_request_write(mddev, r1_bio); unplug = 1; - } else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) { - /* some requests in the r1bio were REQ_HARDBARRIER - * requests which failed with -EOPNOTSUPP. Hohumm.. - * Better resubmit without the barrier. - * We know which devices to resubmit for, because - * all others have had their bios[] entry cleared. - * We already have a nr_pending reference on these rdevs. - */ - int i; - const unsigned long do_sync = (r1_bio->master_bio->bi_rw & REQ_SYNC); - clear_bit(R1BIO_BarrierRetry, &r1_bio->state); - clear_bit(R1BIO_Barrier, &r1_bio->state); - for (i=0; i < conf->raid_disks; i++) - if (r1_bio->bios[i]) - atomic_inc(&r1_bio->remaining); - for (i=0; i < conf->raid_disks; i++) - if (r1_bio->bios[i]) { - struct bio_vec *bvec; - int j; - - bio = bio_clone(r1_bio->master_bio, GFP_NOIO); - /* copy pages from the failed bio, as - * this might be a write-behind device */ - __bio_for_each_segment(bvec, bio, j, 0) - bvec->bv_page = bio_iovec_idx(r1_bio->bios[i], j)->bv_page; - bio_put(r1_bio->bios[i]); - bio->bi_sector = r1_bio->sector + - conf->mirrors[i].rdev->data_offset; - bio->bi_bdev = conf->mirrors[i].rdev->bdev; - bio->bi_end_io = raid1_end_write_request; - bio->bi_rw = WRITE | do_sync; - bio->bi_private = r1_bio; - r1_bio->bios[i] = bio; - generic_make_request(bio); - } } else { int disk; diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h index 5f2d443..adf8cfd 100644 --- a/drivers/md/raid1.h +++ b/drivers/md/raid1.h @@ -117,8 +117,6 @@ struct r1bio_s { #define R1BIO_IsSync 1 #define R1BIO_Degraded 2 #define R1BIO_BehindIO 3 -#define R1BIO_Barrier 4 -#define R1BIO_BarrierRetry 5 /* For write-behind requests, we call bi_end_io when * the last non-write-behind device completes, providing * any write was successful. Otherwise we call when diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8471838..f0d082f 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -800,12 +800,13 @@ static int make_request(mddev_t *mddev, struct bio * bio) int chunk_sects = conf->chunk_mask + 1; const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); + const unsigned long do_fua = (bio->bi_rw & REQ_FUA); struct bio_list bl; unsigned long flags; mdk_rdev_t *blocked_rdev; - if (unlikely(bio->bi_rw & REQ_HARDBARRIER)) { - md_barrier_request(mddev, bio); + if (unlikely(bio->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bio); return 0; } @@ -965,7 +966,7 @@ static int make_request(mddev_t *mddev, struct bio * bio) conf->mirrors[d].rdev->data_offset; mbio->bi_bdev = conf->mirrors[d].rdev->bdev; mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync; + mbio->bi_rw = WRITE | do_sync | do_fua; mbio->bi_private = r10_bio; atomic_inc(&r10_bio->remaining); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 69b0a16..31140d1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -506,9 +506,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) int rw; struct bio *bi; mdk_rdev_t *rdev; - if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) - rw = WRITE; - else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) + if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) { + if (test_and_clear_bit(R5_WantFUA, &sh->dev[i].flags)) + rw = WRITE_FUA; + else + rw = WRITE; + } else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) rw = READ; else continue; @@ -1031,6 +1034,8 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { + if (wbi->bi_rw & REQ_FUA) + set_bit(R5_WantFUA, &dev->flags); tx = async_copy_data(1, wbi, dev->page, dev->sector, tx); wbi = r5_next_bio(wbi, dev->sector); @@ -1048,15 +1053,22 @@ static void ops_complete_reconstruct(void *stripe_head_ref) int pd_idx = sh->pd_idx; int qd_idx = sh->qd_idx; int i; + bool fua = false; pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector); + for (i = disks; i--; ) + fua |= test_bit(R5_WantFUA, &sh->dev[i].flags); + for (i = disks; i--; ) { struct r5dev *dev = &sh->dev[i]; - if (dev->written || i == pd_idx || i == qd_idx) + if (dev->written || i == pd_idx || i == qd_idx) { set_bit(R5_UPTODATE, &dev->flags); + if (fua) + set_bit(R5_WantFUA, &dev->flags); + } } if (sh->reconstruct_state == reconstruct_state_drain_run) @@ -3281,7 +3293,7 @@ static void handle_stripe5(struct stripe_head *sh) if (dec_preread_active) { /* We delay this until after ops_run_io so that if make_request - * is waiting on a barrier, it won't continue until the writes + * is waiting on a flush, it won't continue until the writes * have actually been submitted. */ atomic_dec(&conf->preread_active_stripes); @@ -3583,7 +3595,7 @@ static void handle_stripe6(struct stripe_head *sh) if (dec_preread_active) { /* We delay this until after ops_run_io so that if make_request - * is waiting on a barrier, it won't continue until the writes + * is waiting on a flush, it won't continue until the writes * have actually been submitted. */ atomic_dec(&conf->preread_active_stripes); @@ -3978,14 +3990,8 @@ static int make_request(mddev_t *mddev, struct bio * bi) const int rw = bio_data_dir(bi); int remaining; - if (unlikely(bi->bi_rw & REQ_HARDBARRIER)) { - /* Drain all pending writes. We only really need - * to ensure they have been submitted, but this is - * easier. - */ - mddev->pers->quiesce(mddev, 1); - mddev->pers->quiesce(mddev, 0); - md_barrier_request(mddev, bi); + if (unlikely(bi->bi_rw & REQ_FLUSH)) { + md_flush_request(mddev, bi); return 0; } @@ -4103,7 +4109,7 @@ static int make_request(mddev_t *mddev, struct bio * bi) finish_wait(&conf->wait_for_overlap, &w); set_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - if (mddev->barrier && + if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); release_stripe(sh); @@ -4126,13 +4132,6 @@ static int make_request(mddev_t *mddev, struct bio * bi) bio_endio(bi, 0); } - if (mddev->barrier) { - /* We need to wait for the stripes to all be handled. - * So: wait for preread_active_stripes to drop to 0. - */ - wait_event(mddev->thread->wqueue, - atomic_read(&conf->preread_active_stripes) == 0); - } return 0; } diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 36eaed5..2ace058 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -275,6 +275,7 @@ struct r6_state { * filling */ #define R5_Wantdrain 13 /* dev->towrite needs to be drained */ +#define R5_WantFUA 14 /* Write should be FUA */ /* * Write method */ -- cgit v1.1 From 3a2edd0d6ddbd5fa3b389ea6db811285415ce6c8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:18 +0200 Subject: block: make __blk_rq_prep_clone() copy most command flags Currently __blk_rq_prep_clone() copies only REQ_WRITE and REQ_DISCARD. There's no reason to omit other command flags and REQ_FUA needs to be copied to implement FUA support in request-based dm. REQ_COMMON_MASK which specifies flags to be copied from bio to request already identifies all the command flags. Define REQ_CLONE_MASK to be the same as REQ_COMMON_MASK for clarity and make __blk_rq_prep_clone() copy all flags in the mask. Signed-off-by: Tejun Heo Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 4 +--- include/linux/blk_types.h | 1 + 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 495bdc4..2a5b192 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2505,9 +2505,7 @@ EXPORT_SYMBOL_GPL(blk_rq_unprep_clone); static void __blk_rq_prep_clone(struct request *dst, struct request *src) { dst->cpu = src->cpu; - dst->cmd_flags = (rq_data_dir(src) | REQ_NOMERGE); - if (src->cmd_flags & REQ_DISCARD) - dst->cmd_flags |= REQ_DISCARD; + dst->cmd_flags = (src->cmd_flags & REQ_CLONE_MASK) | REQ_NOMERGE; dst->cmd_type = src->cmd_type; dst->__sector = blk_rq_pos(src); dst->__data_len = blk_rq_bytes(src); diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 1797994..36edadf 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -168,6 +168,7 @@ enum rq_flag_bits { #define REQ_COMMON_MASK \ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \ REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) +#define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_UNPLUG (1 << __REQ_UNPLUG) #define REQ_RAHEAD (1 << __REQ_RAHEAD) -- cgit v1.1 From d87f4c14f27dc82d215108d8392a7d26687148a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Sep 2010 11:56:19 +0200 Subject: dm: implement REQ_FLUSH/FUA support for bio-based dm This patch converts bio-based dm to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. * -EOPNOTSUPP handling logic dropped. * Preflush is handled as before but postflush is dropped and replaced with passing down REQ_FUA to member request_queues. This replaces one array wide cache flush w/ member specific FUA writes. * __split_and_process_bio() now calls __clone_and_map_flush() directly for flushes and guarantees all FLUSH bio's going to targets are zero ` length. * It's now guaranteed that all FLUSH bio's which are passed onto dm targets are zero length. bio_empty_barrier() tests are replaced with REQ_FLUSH tests. * Empty WRITE_BARRIERs are replaced with WRITE_FLUSHes. * Dropped unlikely() around REQ_FLUSH tests. Flushes are not unlikely enough to be marked with unlikely(). * Block layer now filters out REQ_FLUSH/FUA bio's if the request_queue doesn't support cache flushing. Advertise REQ_FLUSH | REQ_FUA capability. * Request based dm isn't converted yet. dm_init_request_based_queue() resets flush support to 0 for now. To avoid disturbing request based dm code, dm->flush_error is added for bio based dm while requested based dm continues to use dm->barrier_error. Lightly tested linear, stripe, raid1, snap and crypt targets. Please proceed with caution as I'm not familiar with the code base. Signed-off-by: Tejun Heo Cc: dm-devel@redhat.com Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/md/dm-crypt.c | 2 +- drivers/md/dm-io.c | 20 ++----- drivers/md/dm-log.c | 2 +- drivers/md/dm-raid1.c | 8 +-- drivers/md/dm-region-hash.c | 16 +++--- drivers/md/dm-snap-persistent.c | 2 +- drivers/md/dm-snap.c | 6 +- drivers/md/dm-stripe.c | 2 +- drivers/md/dm.c | 119 +++++++++++++++++++--------------------- 9 files changed, 80 insertions(+), 97 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 368e8e9..d5b0e4c 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1278,7 +1278,7 @@ static int crypt_map(struct dm_target *ti, struct bio *bio, struct dm_crypt_io *io; struct crypt_config *cc; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { cc = ti->private; bio->bi_bdev = cc->dev->bdev; return DM_MAPIO_REMAPPED; diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 0590c75..136d4f7 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -31,7 +31,6 @@ struct dm_io_client { */ struct io { unsigned long error_bits; - unsigned long eopnotsupp_bits; atomic_t count; struct task_struct *sleeper; struct dm_io_client *client; @@ -130,11 +129,8 @@ static void retrieve_io_and_region_from_bio(struct bio *bio, struct io **io, *---------------------------------------------------------------*/ static void dec_count(struct io *io, unsigned int region, int error) { - if (error) { + if (error) set_bit(region, &io->error_bits); - if (error == -EOPNOTSUPP) - set_bit(region, &io->eopnotsupp_bits); - } if (atomic_dec_and_test(&io->count)) { if (io->sleeper) @@ -310,8 +306,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, sector_t remaining = where->count; /* - * where->count may be zero if rw holds a write barrier and we - * need to send a zero-sized barrier. + * where->count may be zero if rw holds a flush and we need to + * send a zero-sized flush. */ do { /* @@ -364,7 +360,7 @@ static void dispatch_io(int rw, unsigned int num_regions, */ for (i = 0; i < num_regions; i++) { *dp = old_pages; - if (where[i].count || (rw & REQ_HARDBARRIER)) + if (where[i].count || (rw & REQ_FLUSH)) do_region(rw, i, where + i, dp, io); } @@ -393,9 +389,7 @@ static int sync_io(struct dm_io_client *client, unsigned int num_regions, return -EIO; } -retry: io->error_bits = 0; - io->eopnotsupp_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ io->sleeper = current; io->client = client; @@ -412,11 +406,6 @@ retry: } set_current_state(TASK_RUNNING); - if (io->eopnotsupp_bits && (rw & REQ_HARDBARRIER)) { - rw &= ~REQ_HARDBARRIER; - goto retry; - } - if (error_bits) *error_bits = io->error_bits; @@ -437,7 +426,6 @@ static int async_io(struct dm_io_client *client, unsigned int num_regions, io = mempool_alloc(client->pool, GFP_NOIO); io->error_bits = 0; - io->eopnotsupp_bits = 0; atomic_set(&io->count, 1); /* see dispatch_io() */ io->sleeper = NULL; io->client = client; diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 5a08be0..33420e6 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -300,7 +300,7 @@ static int flush_header(struct log_c *lc) .count = 0, }; - lc->io_req.bi_rw = WRITE_BARRIER; + lc->io_req.bi_rw = WRITE_FLUSH; return dm_io(&lc->io_req, 1, &null_location, NULL); } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 7c081bc..19a59b0 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -259,7 +259,7 @@ static int mirror_flush(struct dm_target *ti) struct dm_io_region io[ms->nr_mirrors]; struct mirror *m; struct dm_io_request io_req = { - .bi_rw = WRITE_BARRIER, + .bi_rw = WRITE_FLUSH, .mem.type = DM_IO_KMEM, .mem.ptr.bvec = NULL, .client = ms->io_client, @@ -629,7 +629,7 @@ static void do_write(struct mirror_set *ms, struct bio *bio) struct dm_io_region io[ms->nr_mirrors], *dest = io; struct mirror *m; struct dm_io_request io_req = { - .bi_rw = WRITE | (bio->bi_rw & WRITE_BARRIER), + .bi_rw = WRITE | (bio->bi_rw & WRITE_FLUSH_FUA), .mem.type = DM_IO_BVEC, .mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx, .notify.fn = write_callback, @@ -670,7 +670,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) bio_list_init(&requeue); while ((bio = bio_list_pop(writes))) { - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { bio_list_add(&sync, bio); continue; } @@ -1203,7 +1203,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, * We need to dec pending if this was a write. */ if (rw == WRITE) { - if (likely(!bio_empty_barrier(bio))) + if (!(bio->bi_rw & REQ_FLUSH)) dm_rh_dec(ms->rh, map_context->ll); return error; } diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index bd5c58b..dad011a 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -81,9 +81,9 @@ struct dm_region_hash { struct list_head failed_recovered_regions; /* - * If there was a barrier failure no regions can be marked clean. + * If there was a flush failure no regions can be marked clean. */ - int barrier_failure; + int flush_failure; void *context; sector_t target_begin; @@ -217,7 +217,7 @@ struct dm_region_hash *dm_region_hash_create( INIT_LIST_HEAD(&rh->quiesced_regions); INIT_LIST_HEAD(&rh->recovered_regions); INIT_LIST_HEAD(&rh->failed_recovered_regions); - rh->barrier_failure = 0; + rh->flush_failure = 0; rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, sizeof(struct dm_region)); @@ -399,8 +399,8 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio) region_t region = dm_rh_bio_to_region(rh, bio); int recovering = 0; - if (bio_empty_barrier(bio)) { - rh->barrier_failure = 1; + if (bio->bi_rw & REQ_FLUSH) { + rh->flush_failure = 1; return; } @@ -524,7 +524,7 @@ void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios) struct bio *bio; for (bio = bios->head; bio; bio = bio->bi_next) { - if (bio_empty_barrier(bio)) + if (bio->bi_rw & REQ_FLUSH) continue; rh_inc(rh, dm_rh_bio_to_region(rh, bio)); } @@ -555,9 +555,9 @@ void dm_rh_dec(struct dm_region_hash *rh, region_t region) */ /* do nothing for DM_RH_NOSYNC */ - if (unlikely(rh->barrier_failure)) { + if (unlikely(rh->flush_failure)) { /* - * If a write barrier failed some time ago, we + * If a write flush failed some time ago, we * don't know whether or not this write made it * to the disk, so we must resync the device. */ diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index cc2bdb8..0b61792 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -687,7 +687,7 @@ static void persistent_commit_exception(struct dm_exception_store *store, /* * Commit exceptions to disk. */ - if (ps->valid && area_io(ps, WRITE_BARRIER)) + if (ps->valid && area_io(ps, WRITE_FLUSH_FUA)) ps->valid = 0; /* diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 5974d30..eed2101 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1587,7 +1587,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio, chunk_t chunk; struct dm_snap_pending_exception *pe = NULL; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { bio->bi_bdev = s->cow->bdev; return DM_MAPIO_REMAPPED; } @@ -1691,7 +1691,7 @@ static int snapshot_merge_map(struct dm_target *ti, struct bio *bio, int r = DM_MAPIO_REMAPPED; chunk_t chunk; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { if (!map_context->target_request_nr) bio->bi_bdev = s->origin->bdev; else @@ -2135,7 +2135,7 @@ static int origin_map(struct dm_target *ti, struct bio *bio, struct dm_dev *dev = ti->private; bio->bi_bdev = dev->bdev; - if (unlikely(bio_empty_barrier(bio))) + if (bio->bi_rw & REQ_FLUSH) return DM_MAPIO_REMAPPED; /* Only tell snapshots if this is a write */ diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index c297f6d..f0371b4 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -271,7 +271,7 @@ static int stripe_map(struct dm_target *ti, struct bio *bio, uint32_t stripe; unsigned target_request_nr; - if (unlikely(bio_empty_barrier(bio))) { + if (bio->bi_rw & REQ_FLUSH) { target_request_nr = map_context->target_request_nr; BUG_ON(target_request_nr >= sc->stripes); bio->bi_bdev = sc->stripe[target_request_nr].dev->bdev; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index b1d92be..32e6622 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -144,15 +144,16 @@ struct mapped_device { spinlock_t deferred_lock; /* - * An error from the barrier request currently being processed. + * An error from the flush request currently being processed. */ - int barrier_error; + int flush_error; /* * Protect barrier_error from concurrent endio processing * in request-based dm. */ spinlock_t barrier_error_lock; + int barrier_error; /* * Processing queue (flush/barriers) @@ -200,8 +201,8 @@ struct mapped_device { /* sysfs handle */ struct kobject kobj; - /* zero-length barrier that will be cloned and submitted to targets */ - struct bio barrier_bio; + /* zero-length flush that will be cloned and submitted to targets */ + struct bio flush_bio; }; /* @@ -512,7 +513,7 @@ static void end_io_acct(struct dm_io *io) /* * After this is decremented the bio must not be touched if it is - * a barrier. + * a flush. */ dm_disk(md)->part0.in_flight[rw] = pending = atomic_dec_return(&md->pending[rw]); @@ -626,7 +627,7 @@ static void dec_pending(struct dm_io *io, int error) */ spin_lock_irqsave(&md->deferred_lock, flags); if (__noflush_suspending(md)) { - if (!(io->bio->bi_rw & REQ_HARDBARRIER)) + if (!(io->bio->bi_rw & REQ_FLUSH)) bio_list_add_head(&md->deferred, io->bio); } else @@ -638,20 +639,14 @@ static void dec_pending(struct dm_io *io, int error) io_error = io->error; bio = io->bio; - if (bio->bi_rw & REQ_HARDBARRIER) { + if (bio->bi_rw & REQ_FLUSH) { /* - * There can be just one barrier request so we use + * There can be just one flush request so we use * a per-device variable for error reporting. * Note that you can't touch the bio after end_io_acct - * - * We ignore -EOPNOTSUPP for empty flush reported by - * underlying devices. We assume that if the device - * doesn't support empty barriers, it doesn't need - * cache flushing commands. */ - if (!md->barrier_error && - !(bio_empty_barrier(bio) && io_error == -EOPNOTSUPP)) - md->barrier_error = io_error; + if (!md->flush_error) + md->flush_error = io_error; end_io_acct(io); free_io(md, io); } else { @@ -1119,7 +1114,7 @@ static void dm_bio_destructor(struct bio *bio) } /* - * Creates a little bio that is just does part of a bvec. + * Creates a little bio that just does part of a bvec. */ static struct bio *split_bvec(struct bio *bio, sector_t sector, unsigned short idx, unsigned int offset, @@ -1134,7 +1129,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_sector = sector; clone->bi_bdev = bio->bi_bdev; - clone->bi_rw = bio->bi_rw & ~REQ_HARDBARRIER; + clone->bi_rw = bio->bi_rw; clone->bi_vcnt = 1; clone->bi_size = to_bytes(len); clone->bi_io_vec->bv_offset = offset; @@ -1161,7 +1156,6 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs); __bio_clone(clone, bio); - clone->bi_rw &= ~REQ_HARDBARRIER; clone->bi_destructor = dm_bio_destructor; clone->bi_sector = sector; clone->bi_idx = idx; @@ -1225,7 +1219,7 @@ static void __issue_target_requests(struct clone_info *ci, struct dm_target *ti, __issue_target_request(ci, ti, request_nr, len); } -static int __clone_and_map_empty_barrier(struct clone_info *ci) +static int __clone_and_map_flush(struct clone_info *ci) { unsigned target_nr = 0; struct dm_target *ti; @@ -1289,9 +1283,6 @@ static int __clone_and_map(struct clone_info *ci) sector_t len = 0, max; struct dm_target_io *tio; - if (unlikely(bio_empty_barrier(bio))) - return __clone_and_map_empty_barrier(ci); - if (unlikely(bio->bi_rw & REQ_DISCARD)) return __clone_and_map_discard(ci); @@ -1383,11 +1374,11 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.map = dm_get_live_table(md); if (unlikely(!ci.map)) { - if (!(bio->bi_rw & REQ_HARDBARRIER)) + if (!(bio->bi_rw & REQ_FLUSH)) bio_io_error(bio); else - if (!md->barrier_error) - md->barrier_error = -EIO; + if (!md->flush_error) + md->flush_error = -EIO; return; } @@ -1400,14 +1391,22 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.io->md = md; spin_lock_init(&ci.io->endio_lock); ci.sector = bio->bi_sector; - ci.sector_count = bio_sectors(bio); - if (unlikely(bio_empty_barrier(bio))) + if (!(bio->bi_rw & REQ_FLUSH)) + ci.sector_count = bio_sectors(bio); + else { + /* all FLUSH bio's reaching here should be empty */ + WARN_ON_ONCE(bio_has_data(bio)); ci.sector_count = 1; + } ci.idx = bio->bi_idx; start_io_acct(ci.io); - while (ci.sector_count && !error) - error = __clone_and_map(&ci); + while (ci.sector_count && !error) { + if (!(bio->bi_rw & REQ_FLUSH)) + error = __clone_and_map(&ci); + else + error = __clone_and_map_flush(&ci); + } /* drop the extra reference count */ dec_pending(ci.io, error); @@ -1492,11 +1491,11 @@ static int _dm_request(struct request_queue *q, struct bio *bio) part_stat_unlock(); /* - * If we're suspended or the thread is processing barriers + * If we're suspended or the thread is processing flushes * we have to queue this io for later. */ if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) || - unlikely(bio->bi_rw & REQ_HARDBARRIER)) { + (bio->bi_rw & REQ_FLUSH)) { up_read(&md->io_lock); if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && @@ -1940,6 +1939,7 @@ static void dm_init_md_queue(struct mapped_device *md) blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY); md->queue->unplug_fn = dm_unplug_all; blk_queue_merge_bvec(md->queue, dm_merge_bvec); + blk_queue_flush(md->queue, REQ_FLUSH | REQ_FUA); } /* @@ -2245,7 +2245,8 @@ static int dm_init_request_based_queue(struct mapped_device *md) blk_queue_softirq_done(md->queue, dm_softirq_done); blk_queue_prep_rq(md->queue, dm_prep_fn); blk_queue_lld_busy(md->queue, dm_lld_busy); - blk_queue_flush(md->queue, REQ_FLUSH); + /* no flush support for request based dm yet */ + blk_queue_flush(md->queue, 0); elv_register_queue(md->queue); @@ -2406,41 +2407,35 @@ static int dm_wait_for_completion(struct mapped_device *md, int interruptible) return r; } -static void dm_flush(struct mapped_device *md) +static void process_flush(struct mapped_device *md, struct bio *bio) { - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - - bio_init(&md->barrier_bio); - md->barrier_bio.bi_bdev = md->bdev; - md->barrier_bio.bi_rw = WRITE_BARRIER; - __split_and_process_bio(md, &md->barrier_bio); + md->flush_error = 0; + /* handle REQ_FLUSH */ dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); -} -static void process_barrier(struct mapped_device *md, struct bio *bio) -{ - md->barrier_error = 0; + bio_init(&md->flush_bio); + md->flush_bio.bi_bdev = md->bdev; + md->flush_bio.bi_rw = WRITE_FLUSH; + __split_and_process_bio(md, &md->flush_bio); - dm_flush(md); + dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - if (!bio_empty_barrier(bio)) { - __split_and_process_bio(md, bio); - /* - * If the request isn't supported, don't waste time with - * the second flush. - */ - if (md->barrier_error != -EOPNOTSUPP) - dm_flush(md); + /* if it's an empty flush or the preflush failed, we're done */ + if (!bio_has_data(bio) || md->flush_error) { + if (md->flush_error != DM_ENDIO_REQUEUE) + bio_endio(bio, md->flush_error); + else { + spin_lock_irq(&md->deferred_lock); + bio_list_add_head(&md->deferred, bio); + spin_unlock_irq(&md->deferred_lock); + } + return; } - if (md->barrier_error != DM_ENDIO_REQUEUE) - bio_endio(bio, md->barrier_error); - else { - spin_lock_irq(&md->deferred_lock); - bio_list_add_head(&md->deferred, bio); - spin_unlock_irq(&md->deferred_lock); - } + /* issue data + REQ_FUA */ + bio->bi_rw &= ~REQ_FLUSH; + __split_and_process_bio(md, bio); } /* @@ -2469,8 +2464,8 @@ static void dm_wq_work(struct work_struct *work) if (dm_request_based(md)) generic_make_request(c); else { - if (c->bi_rw & REQ_HARDBARRIER) - process_barrier(md, c); + if (c->bi_rw & REQ_FLUSH) + process_flush(md, c); else __split_and_process_bio(md, c); } -- cgit v1.1 From 29e4013de7ad950280e4b220894986866697d419 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Sep 2010 18:07:00 +0200 Subject: dm: implement REQ_FLUSH/FUA support for request-based dm This patch converts request-based dm to support the new REQ_FLUSH/FUA. The original request-based flush implementation depended on request_queue blocking other requests while a barrier sequence is in progress, which is no longer true for the new REQ_FLUSH/FUA. In general, request-based dm doesn't have infrastructure for cloning one source request to multiple targets, but the original flush implementation had a special mostly independent path which can issue flushes to multiple targets and sequence them. However, the capability isn't currently in use and adds a lot of complexity. Moreoever, it's unlikely to be useful in its current form as it doesn't make sense to be able to send out flushes to multiple targets when write requests can't be. This patch rips out special flush code path and deals handles REQ_FLUSH/FUA requests the same way as other requests. The only special treatment is that REQ_FLUSH requests use the block address 0 when finding target, which is enough for now. * added BUG_ON(!dm_target_is_valid(ti)) in dm_request_fn() as suggested by Mike Snitzer Signed-off-by: Tejun Heo Acked-by: Mike Snitzer Tested-by: Kiyoshi Ueda Signed-off-by: Jens Axboe --- drivers/md/dm.c | 206 ++++++-------------------------------------------------- 1 file changed, 22 insertions(+), 184 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 32e6622..65114e4 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -149,20 +149,9 @@ struct mapped_device { int flush_error; /* - * Protect barrier_error from concurrent endio processing - * in request-based dm. - */ - spinlock_t barrier_error_lock; - int barrier_error; - - /* - * Processing queue (flush/barriers) + * Processing queue (flush) */ struct workqueue_struct *wq; - struct work_struct barrier_work; - - /* A pointer to the currently processing pre/post flush request */ - struct request *flush_request; /* * The current mapping. @@ -750,23 +739,6 @@ static void end_clone_bio(struct bio *clone, int error) blk_update_request(tio->orig, 0, nr_bytes); } -static void store_barrier_error(struct mapped_device *md, int error) -{ - unsigned long flags; - - spin_lock_irqsave(&md->barrier_error_lock, flags); - /* - * Basically, the first error is taken, but: - * -EOPNOTSUPP supersedes any I/O error. - * Requeue request supersedes any I/O error but -EOPNOTSUPP. - */ - if (!md->barrier_error || error == -EOPNOTSUPP || - (md->barrier_error != -EOPNOTSUPP && - error == DM_ENDIO_REQUEUE)) - md->barrier_error = error; - spin_unlock_irqrestore(&md->barrier_error_lock, flags); -} - /* * Don't touch any member of the md after calling this function because * the md may be freed in dm_put() at the end of this function. @@ -804,13 +776,11 @@ static void free_rq_clone(struct request *clone) static void dm_end_request(struct request *clone, int error) { int rw = rq_data_dir(clone); - int run_queue = 1; - bool is_barrier = clone->cmd_flags & REQ_HARDBARRIER; struct dm_rq_target_io *tio = clone->end_io_data; struct mapped_device *md = tio->md; struct request *rq = tio->orig; - if (rq->cmd_type == REQ_TYPE_BLOCK_PC && !is_barrier) { + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { rq->errors = clone->errors; rq->resid_len = clone->resid_len; @@ -824,15 +794,8 @@ static void dm_end_request(struct request *clone, int error) } free_rq_clone(clone); - - if (unlikely(is_barrier)) { - if (unlikely(error)) - store_barrier_error(md, error); - run_queue = 0; - } else - blk_end_request_all(rq, error); - - rq_completed(md, rw, run_queue); + blk_end_request_all(rq, error); + rq_completed(md, rw, true); } static void dm_unprep_request(struct request *rq) @@ -857,16 +820,6 @@ void dm_requeue_unmapped_request(struct request *clone) struct request_queue *q = rq->q; unsigned long flags; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. - * Leave it to dm_end_request(), which handles this special - * case. - */ - dm_end_request(clone, DM_ENDIO_REQUEUE); - return; - } - dm_unprep_request(rq); spin_lock_irqsave(q->queue_lock, flags); @@ -956,19 +909,6 @@ static void dm_complete_request(struct request *clone, int error) struct dm_rq_target_io *tio = clone->end_io_data; struct request *rq = tio->orig; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. So can't use - * softirq_done with the original. - * Pass the clone to dm_done() directly in this special case. - * It is safe (even if clone->q->queue_lock is held here) - * because there is no I/O dispatching during the completion - * of barrier clone. - */ - dm_done(clone, error, true); - return; - } - tio->error = error; rq->completion_data = clone; blk_complete_request(rq); @@ -985,17 +925,6 @@ void dm_kill_unmapped_request(struct request *clone, int error) struct dm_rq_target_io *tio = clone->end_io_data; struct request *rq = tio->orig; - if (unlikely(clone->cmd_flags & REQ_HARDBARRIER)) { - /* - * Barrier clones share an original request. - * Leave it to dm_end_request(), which handles this special - * case. - */ - BUG_ON(error > 0); - dm_end_request(clone, error); - return; - } - rq->cmd_flags |= REQ_FAILED; dm_complete_request(clone, error); } @@ -1536,14 +1465,6 @@ static int dm_request(struct request_queue *q, struct bio *bio) return _dm_request(q, bio); } -static bool dm_rq_is_flush_request(struct request *rq) -{ - if (rq->cmd_flags & REQ_FLUSH) - return true; - else - return false; -} - void dm_dispatch_request(struct request *rq) { int r; @@ -1591,22 +1512,15 @@ static int setup_clone(struct request *clone, struct request *rq, { int r; - if (dm_rq_is_flush_request(rq)) { - blk_rq_init(NULL, clone); - clone->cmd_type = REQ_TYPE_FS; - clone->cmd_flags |= (REQ_HARDBARRIER | WRITE); - } else { - r = blk_rq_prep_clone(clone, rq, tio->md->bs, GFP_ATOMIC, - dm_rq_bio_constructor, tio); - if (r) - return r; - - clone->cmd = rq->cmd; - clone->cmd_len = rq->cmd_len; - clone->sense = rq->sense; - clone->buffer = rq->buffer; - } + r = blk_rq_prep_clone(clone, rq, tio->md->bs, GFP_ATOMIC, + dm_rq_bio_constructor, tio); + if (r) + return r; + clone->cmd = rq->cmd; + clone->cmd_len = rq->cmd_len; + clone->sense = rq->sense; + clone->buffer = rq->buffer; clone->end_io = end_clone_request; clone->end_io_data = tio; @@ -1647,9 +1561,6 @@ static int dm_prep_fn(struct request_queue *q, struct request *rq) struct mapped_device *md = q->queuedata; struct request *clone; - if (unlikely(dm_rq_is_flush_request(rq))) - return BLKPREP_OK; - if (unlikely(rq->special)) { DMWARN("Already has something in rq->special."); return BLKPREP_KILL; @@ -1726,6 +1637,7 @@ static void dm_request_fn(struct request_queue *q) struct dm_table *map = dm_get_live_table(md); struct dm_target *ti; struct request *rq, *clone; + sector_t pos; /* * For suspend, check blk_queue_stopped() and increment @@ -1738,15 +1650,14 @@ static void dm_request_fn(struct request_queue *q) if (!rq) goto plug_and_out; - if (unlikely(dm_rq_is_flush_request(rq))) { - BUG_ON(md->flush_request); - md->flush_request = rq; - blk_start_request(rq); - queue_work(md->wq, &md->barrier_work); - goto out; - } + /* always use block 0 to find the target for flushes for now */ + pos = 0; + if (!(rq->cmd_flags & REQ_FLUSH)) + pos = blk_rq_pos(rq); + + ti = dm_table_find_target(map, pos); + BUG_ON(!dm_target_is_valid(ti)); - ti = dm_table_find_target(map, blk_rq_pos(rq)); if (ti->type->busy && ti->type->busy(ti)) goto plug_and_out; @@ -1917,7 +1828,6 @@ out: static const struct block_device_operations dm_blk_dops; static void dm_wq_work(struct work_struct *work); -static void dm_rq_barrier_work(struct work_struct *work); static void dm_init_md_queue(struct mapped_device *md) { @@ -1972,7 +1882,6 @@ static struct mapped_device *alloc_dev(int minor) mutex_init(&md->suspend_lock); mutex_init(&md->type_lock); spin_lock_init(&md->deferred_lock); - spin_lock_init(&md->barrier_error_lock); rwlock_init(&md->map_lock); atomic_set(&md->holders, 1); atomic_set(&md->open_count, 0); @@ -1995,7 +1904,6 @@ static struct mapped_device *alloc_dev(int minor) atomic_set(&md->pending[1], 0); init_waitqueue_head(&md->wait); INIT_WORK(&md->work, dm_wq_work); - INIT_WORK(&md->barrier_work, dm_rq_barrier_work); init_waitqueue_head(&md->eventq); md->disk->major = _major; @@ -2245,8 +2153,6 @@ static int dm_init_request_based_queue(struct mapped_device *md) blk_queue_softirq_done(md->queue, dm_softirq_done); blk_queue_prep_rq(md->queue, dm_prep_fn); blk_queue_lld_busy(md->queue, dm_lld_busy); - /* no flush support for request based dm yet */ - blk_queue_flush(md->queue, 0); elv_register_queue(md->queue); @@ -2483,73 +2389,6 @@ static void dm_queue_flush(struct mapped_device *md) queue_work(md->wq, &md->work); } -static void dm_rq_set_target_request_nr(struct request *clone, unsigned request_nr) -{ - struct dm_rq_target_io *tio = clone->end_io_data; - - tio->info.target_request_nr = request_nr; -} - -/* Issue barrier requests to targets and wait for their completion. */ -static int dm_rq_barrier(struct mapped_device *md) -{ - int i, j; - struct dm_table *map = dm_get_live_table(md); - unsigned num_targets = dm_table_get_num_targets(map); - struct dm_target *ti; - struct request *clone; - - md->barrier_error = 0; - - for (i = 0; i < num_targets; i++) { - ti = dm_table_get_target(map, i); - for (j = 0; j < ti->num_flush_requests; j++) { - clone = clone_rq(md->flush_request, md, GFP_NOIO); - dm_rq_set_target_request_nr(clone, j); - atomic_inc(&md->pending[rq_data_dir(clone)]); - map_request(ti, clone, md); - } - } - - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - dm_table_put(map); - - return md->barrier_error; -} - -static void dm_rq_barrier_work(struct work_struct *work) -{ - int error; - struct mapped_device *md = container_of(work, struct mapped_device, - barrier_work); - struct request_queue *q = md->queue; - struct request *rq; - unsigned long flags; - - /* - * Hold the md reference here and leave it at the last part so that - * the md can't be deleted by device opener when the barrier request - * completes. - */ - dm_get(md); - - error = dm_rq_barrier(md); - - rq = md->flush_request; - md->flush_request = NULL; - - if (error == DM_ENDIO_REQUEUE) { - spin_lock_irqsave(q->queue_lock, flags); - blk_requeue_request(q, rq); - spin_unlock_irqrestore(q->queue_lock, flags); - } else - blk_end_request_all(rq, error); - - blk_run_queue(q); - - dm_put(md); -} - /* * Swap in a new table, returning the old one for the caller to destroy. */ @@ -2686,9 +2525,8 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) up_write(&md->io_lock); /* - * Request-based dm uses md->wq for barrier (dm_rq_barrier_work) which - * can be kicked until md->queue is stopped. So stop md->queue before - * flushing md->wq. + * Stop md->queue before flushing md->wq in case request-based + * dm defers requests to md->wq from md->queue. */ if (dm_request_based(md)) stop_queue(md->queue); -- cgit v1.1 From 6a8736d10cb413be95ea443ba40f25c93f4ef9b2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 8 Sep 2010 18:07:00 +0200 Subject: dm: relax ordering of bio-based flush implementation Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA doesn't mandate any ordering against other bio's. This patch relaxes ordering around flushes. * A flush bio is no longer deferred to workqueue directly. It's processed like other bio's but __split_and_process_bio() uses md->flush_bio as the clone source. md->flush_bio is initialized to empty flush during md initialization and shared for all flushes. * As a flush bio now travels through the same execution path as other bio's, there's no need for dedicated error handling path either. It can use the same error handling path in dec_pending(). Dedicated error handling removed along with md->flush_error. * When dec_pending() detects that a flush has completed, it checks whether the original bio has data. If so, the bio is queued to the deferred list w/ REQ_FLUSH cleared; otherwise, it's completed. * As flush sequencing is handled in the usual issue/completion path, dm_wq_work() no longer needs to handle flushes differently. Now its only responsibility is re-issuing deferred bio's the same way as _dm_request() would. REQ_FLUSH handling logic including process_flush() is dropped. * There's no reason for queue_io() and dm_wq_work() write lock dm->io_lock. queue_io() now only uses md->deferred_lock and dm_wq_work() read locks dm->io_lock. * bio's no longer need to be queued on the deferred list while a flush is in progress making DMF_QUEUE_IO_TO_THREAD unncessary. Drop it. This avoids stalling the device during flushes and simplifies the implementation. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/md/dm.c | 157 ++++++++++++++++---------------------------------------- 1 file changed, 45 insertions(+), 112 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 65114e4..2011704 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -110,7 +110,6 @@ EXPORT_SYMBOL_GPL(dm_get_rq_mapinfo); #define DMF_FREEING 3 #define DMF_DELETING 4 #define DMF_NOFLUSH_SUSPENDING 5 -#define DMF_QUEUE_IO_TO_THREAD 6 /* * Work processed by per-device workqueue. @@ -144,11 +143,6 @@ struct mapped_device { spinlock_t deferred_lock; /* - * An error from the flush request currently being processed. - */ - int flush_error; - - /* * Processing queue (flush) */ struct workqueue_struct *wq; @@ -518,16 +512,10 @@ static void end_io_acct(struct dm_io *io) */ static void queue_io(struct mapped_device *md, struct bio *bio) { - down_write(&md->io_lock); - spin_lock_irq(&md->deferred_lock); bio_list_add(&md->deferred, bio); spin_unlock_irq(&md->deferred_lock); - - if (!test_and_set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) - queue_work(md->wq, &md->work); - - up_write(&md->io_lock); + queue_work(md->wq, &md->work); } /* @@ -615,11 +603,9 @@ static void dec_pending(struct dm_io *io, int error) * Target requested pushing back the I/O. */ spin_lock_irqsave(&md->deferred_lock, flags); - if (__noflush_suspending(md)) { - if (!(io->bio->bi_rw & REQ_FLUSH)) - bio_list_add_head(&md->deferred, - io->bio); - } else + if (__noflush_suspending(md)) + bio_list_add_head(&md->deferred, io->bio); + else /* noflush suspend was interrupted. */ io->error = -EIO; spin_unlock_irqrestore(&md->deferred_lock, flags); @@ -627,26 +613,22 @@ static void dec_pending(struct dm_io *io, int error) io_error = io->error; bio = io->bio; + end_io_acct(io); + free_io(md, io); + + if (io_error == DM_ENDIO_REQUEUE) + return; - if (bio->bi_rw & REQ_FLUSH) { + if (!(bio->bi_rw & REQ_FLUSH) || !bio->bi_size) { + trace_block_bio_complete(md->queue, bio); + bio_endio(bio, io_error); + } else { /* - * There can be just one flush request so we use - * a per-device variable for error reporting. - * Note that you can't touch the bio after end_io_acct + * Preflush done for flush with data, reissue + * without REQ_FLUSH. */ - if (!md->flush_error) - md->flush_error = io_error; - end_io_acct(io); - free_io(md, io); - } else { - end_io_acct(io); - free_io(md, io); - - if (io_error != DM_ENDIO_REQUEUE) { - trace_block_bio_complete(md->queue, bio); - - bio_endio(bio, io_error); - } + bio->bi_rw &= ~REQ_FLUSH; + queue_io(md, bio); } } } @@ -1298,21 +1280,17 @@ static int __clone_and_map(struct clone_info *ci) */ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) { + bool is_flush = bio->bi_rw & REQ_FLUSH; struct clone_info ci; int error = 0; ci.map = dm_get_live_table(md); if (unlikely(!ci.map)) { - if (!(bio->bi_rw & REQ_FLUSH)) - bio_io_error(bio); - else - if (!md->flush_error) - md->flush_error = -EIO; + bio_io_error(bio); return; } ci.md = md; - ci.bio = bio; ci.io = alloc_io(md); ci.io->error = 0; atomic_set(&ci.io->io_count, 1); @@ -1320,18 +1298,19 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.io->md = md; spin_lock_init(&ci.io->endio_lock); ci.sector = bio->bi_sector; - if (!(bio->bi_rw & REQ_FLUSH)) + ci.idx = bio->bi_idx; + + if (!is_flush) { + ci.bio = bio; ci.sector_count = bio_sectors(bio); - else { - /* all FLUSH bio's reaching here should be empty */ - WARN_ON_ONCE(bio_has_data(bio)); + } else { + ci.bio = &ci.md->flush_bio; ci.sector_count = 1; } - ci.idx = bio->bi_idx; start_io_acct(ci.io); while (ci.sector_count && !error) { - if (!(bio->bi_rw & REQ_FLUSH)) + if (!is_flush) error = __clone_and_map(&ci); else error = __clone_and_map_flush(&ci); @@ -1419,22 +1398,14 @@ static int _dm_request(struct request_queue *q, struct bio *bio) part_stat_add(cpu, &dm_disk(md)->part0, sectors[rw], bio_sectors(bio)); part_stat_unlock(); - /* - * If we're suspended or the thread is processing flushes - * we have to queue this io for later. - */ - if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) || - (bio->bi_rw & REQ_FLUSH)) { + /* if we're suspended, we have to queue this io for later */ + if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags))) { up_read(&md->io_lock); - if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) && - bio_rw(bio) == READA) { + if (bio_rw(bio) != READA) + queue_io(md, bio); + else bio_io_error(bio); - return 0; - } - - queue_io(md, bio); - return 0; } @@ -1923,6 +1894,10 @@ static struct mapped_device *alloc_dev(int minor) if (!md->bdev) goto bad_bdev; + bio_init(&md->flush_bio); + md->flush_bio.bi_bdev = md->bdev; + md->flush_bio.bi_rw = WRITE_FLUSH; + /* Populate the mapping, nobody knows we exist yet */ spin_lock(&_minor_lock); old_md = idr_replace(&_minor_idr, md, minor); @@ -2313,37 +2288,6 @@ static int dm_wait_for_completion(struct mapped_device *md, int interruptible) return r; } -static void process_flush(struct mapped_device *md, struct bio *bio) -{ - md->flush_error = 0; - - /* handle REQ_FLUSH */ - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - - bio_init(&md->flush_bio); - md->flush_bio.bi_bdev = md->bdev; - md->flush_bio.bi_rw = WRITE_FLUSH; - __split_and_process_bio(md, &md->flush_bio); - - dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE); - - /* if it's an empty flush or the preflush failed, we're done */ - if (!bio_has_data(bio) || md->flush_error) { - if (md->flush_error != DM_ENDIO_REQUEUE) - bio_endio(bio, md->flush_error); - else { - spin_lock_irq(&md->deferred_lock); - bio_list_add_head(&md->deferred, bio); - spin_unlock_irq(&md->deferred_lock); - } - return; - } - - /* issue data + REQ_FUA */ - bio->bi_rw &= ~REQ_FLUSH; - __split_and_process_bio(md, bio); -} - /* * Process the deferred bios */ @@ -2353,33 +2297,27 @@ static void dm_wq_work(struct work_struct *work) work); struct bio *c; - down_write(&md->io_lock); + down_read(&md->io_lock); while (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) { spin_lock_irq(&md->deferred_lock); c = bio_list_pop(&md->deferred); spin_unlock_irq(&md->deferred_lock); - if (!c) { - clear_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); + if (!c) break; - } - up_write(&md->io_lock); + up_read(&md->io_lock); if (dm_request_based(md)) generic_make_request(c); - else { - if (c->bi_rw & REQ_FLUSH) - process_flush(md, c); - else - __split_and_process_bio(md, c); - } + else + __split_and_process_bio(md, c); - down_write(&md->io_lock); + down_read(&md->io_lock); } - up_write(&md->io_lock); + up_read(&md->io_lock); } static void dm_queue_flush(struct mapped_device *md) @@ -2511,17 +2449,12 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) * * To get all processes out of __split_and_process_bio in dm_request, * we take the write lock. To prevent any process from reentering - * __split_and_process_bio from dm_request, we set - * DMF_QUEUE_IO_TO_THREAD. - * - * To quiesce the thread (dm_wq_work), we set DMF_BLOCK_IO_FOR_SUSPEND - * and call flush_workqueue(md->wq). flush_workqueue will wait until - * dm_wq_work exits and DMF_BLOCK_IO_FOR_SUSPEND will prevent any - * further calls to __split_and_process_bio from dm_wq_work. + * __split_and_process_bio from dm_request and quiesce the thread + * (dm_wq_work), we set BMF_BLOCK_IO_FOR_SUSPEND and call + * flush_workqueue(md->wq). */ down_write(&md->io_lock); set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags); - set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags); up_write(&md->io_lock); /* -- cgit v1.1 From 05447420f99c1c44063c7f00054667c022cc1365 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Wed, 8 Sep 2010 18:07:01 +0200 Subject: dm: fix locking context in queue_io() Now queue_io() is called from dec_pending(), which may be called with interrupts disabled, so queue_io() must not enable interrupts unconditionally and must save/restore the current interrupts status. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/md/dm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 2011704..cd2f7e7 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -512,9 +512,11 @@ static void end_io_acct(struct dm_io *io) */ static void queue_io(struct mapped_device *md, struct bio *bio) { - spin_lock_irq(&md->deferred_lock); + unsigned long flags; + + spin_lock_irqsave(&md->deferred_lock, flags); bio_list_add(&md->deferred, bio); - spin_unlock_irq(&md->deferred_lock); + spin_unlock_irqrestore(&md->deferred_lock, flags); queue_work(md->wq, &md->work); } -- cgit v1.1 From b372d360df6deaf79a58a02fa0cc0d7e0aa3e92f Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 8 Sep 2010 18:07:01 +0200 Subject: dm: convey that all flushes are processed as empty Rename __clone_and_map_flush to __clone_and_map_empty_flush for added clarity. Simplify logic associated with REQ_FLUSH conditionals. Introduce a BUG_ON() and add a few more helpful comments to the code so that it is clear that all flushes are empty. Cleanup __split_and_process_bio() so that an empty flush isn't processed by a 'sector_count' focused while loop. Signed-off-by: Mike Snitzer Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/md/dm.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index cd2f7e7..f934e98 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -621,16 +621,17 @@ static void dec_pending(struct dm_io *io, int error) if (io_error == DM_ENDIO_REQUEUE) return; - if (!(bio->bi_rw & REQ_FLUSH) || !bio->bi_size) { - trace_block_bio_complete(md->queue, bio); - bio_endio(bio, io_error); - } else { + if ((bio->bi_rw & REQ_FLUSH) && bio->bi_size) { /* * Preflush done for flush with data, reissue * without REQ_FLUSH. */ bio->bi_rw &= ~REQ_FLUSH; queue_io(md, bio); + } else { + /* done with normal IO or empty flush */ + trace_block_bio_complete(md->queue, bio); + bio_endio(bio, io_error); } } } @@ -1132,16 +1133,15 @@ static void __issue_target_requests(struct clone_info *ci, struct dm_target *ti, __issue_target_request(ci, ti, request_nr, len); } -static int __clone_and_map_flush(struct clone_info *ci) +static int __clone_and_map_empty_flush(struct clone_info *ci) { unsigned target_nr = 0; struct dm_target *ti; + BUG_ON(bio_has_data(ci->bio)); while ((ti = dm_table_get_target(ci->map, target_nr++))) __issue_target_requests(ci, ti, ti->num_flush_requests, 0); - ci->sector_count = 0; - return 0; } @@ -1282,7 +1282,6 @@ static int __clone_and_map(struct clone_info *ci) */ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) { - bool is_flush = bio->bi_rw & REQ_FLUSH; struct clone_info ci; int error = 0; @@ -1302,20 +1301,17 @@ static void __split_and_process_bio(struct mapped_device *md, struct bio *bio) ci.sector = bio->bi_sector; ci.idx = bio->bi_idx; - if (!is_flush) { + start_io_acct(ci.io); + if (bio->bi_rw & REQ_FLUSH) { + ci.bio = &ci.md->flush_bio; + ci.sector_count = 0; + error = __clone_and_map_empty_flush(&ci); + /* dec_pending submits any data associated with flush */ + } else { ci.bio = bio; ci.sector_count = bio_sectors(bio); - } else { - ci.bio = &ci.md->flush_bio; - ci.sector_count = 1; - } - - start_io_acct(ci.io); - while (ci.sector_count && !error) { - if (!is_flush) + while (ci.sector_count && !error) error = __clone_and_map(&ci); - else - error = __clone_and_map_flush(&ci); } /* drop the extra reference count */ -- cgit v1.1 From 2cf6d26a354ab6362e301b5a323832b02867df47 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:10 -0400 Subject: block: pass gfp_mask and flags to sb_issue_discard We'll need to get rid of the BLKDEV_IFL_BARRIER flag, and to facilitate that and to make the interface less confusing pass all flags explicitly. Signed-off-by: Christoph Hellwig Acked-by: Mike Snitzer Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/ext4/mballoc.c | 3 ++- fs/fat/fatent.c | 4 +++- include/linux/blkdev.h | 11 +++++------ 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 4b4ad4b..df44b34 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2566,7 +2566,8 @@ static inline void ext4_issue_discard(struct super_block *sb, discard_block = block + ext4_group_first_block_no(sb, block_group); trace_ext4_discard_blocks(sb, (unsigned long long) discard_block, count); - ret = sb_issue_discard(sb, discard_block, count); + ret = sb_issue_discard(sb, discard_block, count, GFP_NOFS, + BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); if (ret == EOPNOTSUPP) { ext4_warning(sb, "discard not supported, disabling"); clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD); diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 81184d3..3a56a82 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -577,7 +577,9 @@ int fat_free_clusters(struct inode *inode, int cluster) sb_issue_discard(sb, fat_clus_to_blknr(sbi, first_cl), - nr_clus * sbi->sec_per_clus); + nr_clus * sbi->sec_per_clus, + GFP_NOFS, + BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); first_cl = cluster; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8ef705f..6b305eb 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -881,13 +881,12 @@ extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); -static inline int sb_issue_discard(struct super_block *sb, - sector_t block, sector_t nr_blocks) +static inline int sb_issue_discard(struct super_block *sb, sector_t block, + sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags) { - block <<= (sb->s_blocksize_bits - 9); - nr_blocks <<= (sb->s_blocksize_bits - 9); - return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + return blkdev_issue_discard(sb->s_bdev, block << (sb->s_blocksize_bits - 9), + nr_blocks << (sb->s_blocksize_bits - 9), + gfp_mask, flags); } extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); -- cgit v1.1 From 80f6c29d8a758650d5c9eac05074b4b3e8c266df Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:11 -0400 Subject: xfs: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for log writes and remove the EOPNOTSUPP detection for barriers. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/xfs/linux-2.6/xfs_buf.c | 16 ++-------------- fs/xfs/linux-2.6/xfs_buf.h | 11 +---------- fs/xfs/linux-2.6/xfs_trace.h | 1 - fs/xfs/xfs_log.c | 13 ------------- 4 files changed, 3 insertions(+), 38 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index ea79072..b93ea33 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -929,19 +929,7 @@ xfs_buf_iodone_work( xfs_buf_t *bp = container_of(work, xfs_buf_t, b_iodone_work); - /* - * We can get an EOPNOTSUPP to ordered writes. Here we clear the - * ordered flag and reissue them. Because we can't tell the higher - * layers directly that they should not issue ordered I/O anymore, they - * need to check if the _XFS_BARRIER_FAILED flag was set during I/O completion. - */ - if ((bp->b_error == EOPNOTSUPP) && - (bp->b_flags & (XBF_ORDERED|XBF_ASYNC)) == (XBF_ORDERED|XBF_ASYNC)) { - trace_xfs_buf_ordered_retry(bp, _RET_IP_); - bp->b_flags &= ~XBF_ORDERED; - bp->b_flags |= _XFS_BARRIER_FAILED; - xfs_buf_iorequest(bp); - } else if (bp->b_iodone) + if (bp->b_iodone) (*(bp->b_iodone))(bp); else if (bp->b_flags & XBF_ASYNC) xfs_buf_relse(bp); @@ -1200,7 +1188,7 @@ _xfs_buf_ioapply( if (bp->b_flags & XBF_ORDERED) { ASSERT(!(bp->b_flags & XBF_READ)); - rw = WRITE_BARRIER; + rw = WRITE_FLUSH_FUA; } else if (bp->b_flags & XBF_LOG_BUFFER) { ASSERT(!(bp->b_flags & XBF_READ_AHEAD)); bp->b_flags &= ~_XBF_RUN_QUEUES; diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index d072e5f..d533d64 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -86,14 +86,6 @@ typedef enum { */ #define _XBF_PAGE_LOCKED (1 << 22) -/* - * If we try a barrier write, but it fails we have to communicate - * this to the upper layers. Unfortunately b_error gets overwritten - * when the buffer is re-issued so we have to add another flag to - * keep this information. - */ -#define _XFS_BARRIER_FAILED (1 << 23) - typedef unsigned int xfs_buf_flags_t; #define XFS_BUF_FLAGS \ @@ -114,8 +106,7 @@ typedef unsigned int xfs_buf_flags_t; { _XBF_PAGES, "PAGES" }, \ { _XBF_RUN_QUEUES, "RUN_QUEUES" }, \ { _XBF_DELWRI_Q, "DELWRI_Q" }, \ - { _XBF_PAGE_LOCKED, "PAGE_LOCKED" }, \ - { _XFS_BARRIER_FAILED, "BARRIER_FAILED" } + { _XBF_PAGE_LOCKED, "PAGE_LOCKED" } typedef enum { diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h index be5dffd..8fe311a 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/linux-2.6/xfs_trace.h @@ -325,7 +325,6 @@ DEFINE_BUF_EVENT(xfs_buf_lock); DEFINE_BUF_EVENT(xfs_buf_lock_done); DEFINE_BUF_EVENT(xfs_buf_cond_lock); DEFINE_BUF_EVENT(xfs_buf_unlock); -DEFINE_BUF_EVENT(xfs_buf_ordered_retry); DEFINE_BUF_EVENT(xfs_buf_iowait); DEFINE_BUF_EVENT(xfs_buf_iowait_done); DEFINE_BUF_EVENT(xfs_buf_delwri_queue); diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 925d572..430a8fc 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -917,19 +917,6 @@ xlog_iodone(xfs_buf_t *bp) l = iclog->ic_log; /* - * If the _XFS_BARRIER_FAILED flag was set by a lower - * layer, it means the underlying device no longer supports - * barrier I/O. Warn loudly and turn off barriers. - */ - if (bp->b_flags & _XFS_BARRIER_FAILED) { - bp->b_flags &= ~_XFS_BARRIER_FAILED; - l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER; - xfs_fs_cmn_err(CE_WARN, l->l_mp, - "xlog_iodone: Barriers are no longer supported" - " by device. Disabling barriers\n"); - } - - /* * Race to shutdown the filesystem if we see an error. */ if (XFS_TEST_ERROR((XFS_BUF_GETERROR(bp)), l->l_mp, -- cgit v1.1 From c3b9a62c8f932f32a733d6b628f61f3f28345727 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:12 -0400 Subject: btrfs: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP detection for barriers and stop setting the barrier flag for discards. Signed-off-by: Christoph Hellwig Acked-by: Chris Mason Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/btrfs/disk-io.c | 19 ++++--------------- fs/btrfs/extent-tree.c | 2 +- fs/btrfs/volumes.c | 4 ---- fs/btrfs/volumes.h | 1 - 4 files changed, 5 insertions(+), 21 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 64f1008..5e789f4 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2063,7 +2063,7 @@ static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate) if (uptodate) { set_buffer_uptodate(bh); } else { - if (!buffer_eopnotsupp(bh) && printk_ratelimit()) { + if (printk_ratelimit()) { printk(KERN_WARNING "lost page write due to " "I/O error on %s\n", bdevname(bh->b_bdev, b)); @@ -2200,21 +2200,10 @@ static int write_dev_supers(struct btrfs_device *device, bh->b_end_io = btrfs_end_buffer_write_sync; } - if (i == last_barrier && do_barriers && device->barriers) { - ret = submit_bh(WRITE_BARRIER, bh); - if (ret == -EOPNOTSUPP) { - printk("btrfs: disabling barriers on dev %s\n", - device->name); - set_buffer_uptodate(bh); - device->barriers = 0; - /* one reference for submit_bh */ - get_bh(bh); - lock_buffer(bh); - ret = submit_bh(WRITE_SYNC, bh); - } - } else { + if (i == last_barrier && do_barriers) + ret = submit_bh(WRITE_FLUSH_FUA, bh); + else ret = submit_bh(WRITE_SYNC, bh); - } if (ret) errors++; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 32d0940..43dc9ea 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1696,7 +1696,7 @@ static void btrfs_issue_discard(struct block_device *bdev, u64 start, u64 len) { blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + BLKDEV_IFL_WAIT); } static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr, diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index dd318ff..e25e46a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -398,7 +398,6 @@ static noinline int device_list_add(const char *path, device->work.func = pending_bios_fn; memcpy(device->uuid, disk_super->dev_item.uuid, BTRFS_UUID_SIZE); - device->barriers = 1; spin_lock_init(&device->io_lock); device->name = kstrdup(path, GFP_NOFS); if (!device->name) { @@ -462,7 +461,6 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig) device->devid = orig_dev->devid; device->work.func = pending_bios_fn; memcpy(device->uuid, orig_dev->uuid, sizeof(device->uuid)); - device->barriers = 1; spin_lock_init(&device->io_lock); INIT_LIST_HEAD(&device->dev_list); INIT_LIST_HEAD(&device->dev_alloc_list); @@ -1489,7 +1487,6 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) trans = btrfs_start_transaction(root, 0); lock_chunks(root); - device->barriers = 1; device->writeable = 1; device->work.func = pending_bios_fn; generate_random_uuid(device->uuid); @@ -3084,7 +3081,6 @@ static struct btrfs_device *add_missing_dev(struct btrfs_root *root, return NULL; list_add(&device->dev_list, &fs_devices->devices); - device->barriers = 1; device->dev_root = root->fs_info->dev_root; device->devid = devid; device->work.func = pending_bios_fn; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 31b0fab..2b638b6 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -42,7 +42,6 @@ struct btrfs_device { int running_pending; u64 generation; - int barriers; int writeable; int in_fs_metadata; -- cgit v1.1 From f1e4d518c3beddf67f7722f3548eda0ec7006204 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:13 -0400 Subject: gfs2: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP detection for barriers and stop setting the barrier flag for discards. Signed-off-by: Christoph Hellwig Acked-by: Steven Whitehouse Acked-by: Bob Peterson Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/gfs2/log.c | 19 +++++-------------- fs/gfs2/rgrp.c | 5 ++--- 2 files changed, 7 insertions(+), 17 deletions(-) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index cde1248..9c65170 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -592,22 +592,13 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull) lh->lh_hash = cpu_to_be32(hash); bh->b_end_io = end_buffer_write_sync; - if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - goto skip_barrier; get_bh(bh); - submit_bh(WRITE_BARRIER | REQ_META, bh); - wait_on_buffer(bh); - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - set_buffer_uptodate(bh); - fs_info(sdp, "barrier sync failed - disabling barriers\n"); - set_bit(SDF_NOBARRIERS, &sdp->sd_flags); - lock_buffer(bh); -skip_barrier: - get_bh(bh); + if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) submit_bh(WRITE_SYNC | REQ_META, bh); - wait_on_buffer(bh); - } + else + submit_bh(WRITE_FLUSH_FUA | REQ_META, bh); + wait_on_buffer(bh); + if (!buffer_uptodate(bh)) gfs2_io_error_bh(sdp, bh); brelse(bh); diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 171a744..3793164 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -854,8 +854,7 @@ static void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset, if ((start + nr_sects) != blk) { rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT | - BLKDEV_IFL_BARRIER); + BLKDEV_IFL_WAIT); if (rv) goto fail; nr_sects = 0; @@ -870,7 +869,7 @@ start_new_extent: } if (nr_sects) { rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + BLKDEV_IFL_WAIT); if (rv) goto fail; } -- cgit v1.1 From 7cd33ad23ec41d685902159be8b2c6552fab8bd0 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:14 -0400 Subject: reiserfs: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for log writes and remove the EOPNOTSUPP detection for barriers. Note that reiserfs had a fairly different code path for barriers before as it wa the only filesystem actually making use of them. The new code always uses the old non-barrier codepath and just sets the WRITE_FLUSH_FUA explicitly for the journal commits. Signed-off-by: Christoph Hellwig Acked-by: Jan Kara Acked-by: Chris Mason Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/reiserfs/journal.c | 106 ++++++++++---------------------------------------- 1 file changed, 20 insertions(+), 86 deletions(-) diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index 812e2c0..076c8b1 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -138,13 +138,6 @@ static int reiserfs_clean_and_file_buffer(struct buffer_head *bh) return 0; } -static void disable_barrier(struct super_block *s) -{ - REISERFS_SB(s)->s_mount_opt &= ~(1 << REISERFS_BARRIER_FLUSH); - printk("reiserfs: disabling flush barriers on %s\n", - reiserfs_bdevname(s)); -} - static struct reiserfs_bitmap_node *allocate_bitmap_node(struct super_block *sb) { @@ -677,30 +670,6 @@ static void submit_ordered_buffer(struct buffer_head *bh) submit_bh(WRITE, bh); } -static int submit_barrier_buffer(struct buffer_head *bh) -{ - get_bh(bh); - bh->b_end_io = reiserfs_end_ordered_io; - clear_buffer_dirty(bh); - if (!buffer_uptodate(bh)) - BUG(); - return submit_bh(WRITE_BARRIER, bh); -} - -static void check_barrier_completion(struct super_block *s, - struct buffer_head *bh) -{ - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - disable_barrier(s); - set_buffer_uptodate(bh); - set_buffer_dirty(bh); - reiserfs_write_unlock(s); - sync_dirty_buffer(bh); - reiserfs_write_lock(s); - } -} - #define CHUNK_SIZE 32 struct buffer_chunk { struct buffer_head *bh[CHUNK_SIZE]; @@ -1009,7 +978,6 @@ static int flush_commit_list(struct super_block *s, struct buffer_head *tbh = NULL; unsigned int trans_id = jl->j_trans_id; struct reiserfs_journal *journal = SB_JOURNAL(s); - int barrier = 0; int retval = 0; int write_len; @@ -1094,24 +1062,6 @@ static int flush_commit_list(struct super_block *s, } atomic_dec(&journal->j_async_throttle); - /* We're skipping the commit if there's an error */ - if (retval || reiserfs_is_journal_aborted(journal)) - barrier = 0; - - /* wait on everything written so far before writing the commit - * if we are in barrier mode, send the commit down now - */ - barrier = reiserfs_barrier_flush(s); - if (barrier) { - int ret; - lock_buffer(jl->j_commit_bh); - ret = submit_barrier_buffer(jl->j_commit_bh); - if (ret == -EOPNOTSUPP) { - set_buffer_uptodate(jl->j_commit_bh); - disable_barrier(s); - barrier = 0; - } - } for (i = 0; i < (jl->j_len + 1); i++) { bn = SB_ONDISK_JOURNAL_1st_BLOCK(s) + (jl->j_start + i) % SB_ONDISK_JOURNAL_SIZE(s); @@ -1143,27 +1093,22 @@ static int flush_commit_list(struct super_block *s, BUG_ON(atomic_read(&(jl->j_commit_left)) != 1); - if (!barrier) { - /* If there was a write error in the journal - we can't commit - * this transaction - it will be invalid and, if successful, - * will just end up propagating the write error out to - * the file system. */ - if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { - if (buffer_dirty(jl->j_commit_bh)) - BUG(); - mark_buffer_dirty(jl->j_commit_bh) ; - reiserfs_write_unlock(s); - sync_dirty_buffer(jl->j_commit_bh) ; - reiserfs_write_lock(s); - } - } else { + /* If there was a write error in the journal - we can't commit + * this transaction - it will be invalid and, if successful, + * will just end up propagating the write error out to + * the file system. */ + if (likely(!retval && !reiserfs_is_journal_aborted (journal))) { + if (buffer_dirty(jl->j_commit_bh)) + BUG(); + mark_buffer_dirty(jl->j_commit_bh) ; reiserfs_write_unlock(s); - wait_on_buffer(jl->j_commit_bh); + if (reiserfs_barrier_flush(s)) + __sync_dirty_buffer(jl->j_commit_bh, WRITE_FLUSH_FUA); + else + sync_dirty_buffer(jl->j_commit_bh); reiserfs_write_lock(s); } - check_barrier_completion(s, jl->j_commit_bh); - /* If there was a write error in the journal - we can't commit this * transaction - it will be invalid and, if successful, will just end * up propagating the write error out to the filesystem. */ @@ -1319,26 +1264,15 @@ static int _update_journal_header_block(struct super_block *sb, jh->j_first_unflushed_offset = cpu_to_le32(offset); jh->j_mount_id = cpu_to_le32(journal->j_mount_id); - if (reiserfs_barrier_flush(sb)) { - int ret; - lock_buffer(journal->j_header_bh); - ret = submit_barrier_buffer(journal->j_header_bh); - if (ret == -EOPNOTSUPP) { - set_buffer_uptodate(journal->j_header_bh); - disable_barrier(sb); - goto sync; - } - reiserfs_write_unlock(sb); - wait_on_buffer(journal->j_header_bh); - reiserfs_write_lock(sb); - check_barrier_completion(sb, journal->j_header_bh); - } else { - sync: - set_buffer_dirty(journal->j_header_bh); - reiserfs_write_unlock(sb); + set_buffer_dirty(journal->j_header_bh); + reiserfs_write_unlock(sb); + + if (reiserfs_barrier_flush(sb)) + __sync_dirty_buffer(journal->j_header_bh, WRITE_FLUSH_FUA); + else sync_dirty_buffer(journal->j_header_bh); - reiserfs_write_lock(sb); - } + + reiserfs_write_lock(sb); if (!buffer_uptodate(journal->j_header_bh)) { reiserfs_warning(sb, "journal-837", "IO error during journal replay"); -- cgit v1.1 From f8c131f5b6ffc899a70b30e541f367d47f89691c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:15 -0400 Subject: nilfs2: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP detection for barriers and stop setting the barrier flag for discards. tj: nilfs is now fixed to wait for discard completion. Updated this patch accordingly and dropped warning about it. Signed-off-by: Christoph Hellwig Acked-by: Ryusuke Konishi Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/nilfs2/super.c | 10 +--------- fs/nilfs2/the_nilfs.c | 7 ++----- 2 files changed, 3 insertions(+), 14 deletions(-) diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 9222633..faa5078 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -178,17 +178,9 @@ static int nilfs_sync_super(struct nilfs_sb_info *sbi, int flag) retry: set_buffer_dirty(nilfs->ns_sbh[0]); - if (nilfs_test_opt(sbi, BARRIER)) { err = __sync_dirty_buffer(nilfs->ns_sbh[0], - WRITE_SYNC | WRITE_BARRIER); - if (err == -EOPNOTSUPP) { - nilfs_warning(sbi->s_super, __func__, - "barrier-based sync failed. " - "disabling barriers\n"); - nilfs_clear_opt(sbi, BARRIER); - goto retry; - } + WRITE_SYNC | WRITE_FLUSH_FUA); } else { err = sync_dirty_buffer(nilfs->ns_sbh[0]); } diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c index 4317f17..400b2ca 100644 --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -774,9 +774,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, - BLKDEV_IFL_WAIT | - BLKDEV_IFL_BARRIER); + GFP_NOFS, BLKDEV_IFL_WAIT); if (ret < 0) return ret; nblocks = 0; @@ -786,8 +784,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + GFP_NOFS, BLKDEV_IFL_WAIT); return ret; } -- cgit v1.1 From 4524451ef7e88c64a868a8f5a0b49bda73beb2a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:16 -0400 Subject: jbd: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the EOPNOTSUPP detection for barriers. Signed-off-by: Christoph Hellwig Acked-by: Jan Kara Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/jbd/commit.c | 30 +++--------------------------- 1 file changed, 3 insertions(+), 27 deletions(-) diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 95d8c11..484c5e5 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -137,34 +137,10 @@ static int journal_write_commit_record(journal_t *journal, JBUFFER_TRACE(descriptor, "write commit block"); set_buffer_dirty(bh); - if (journal->j_flags & JFS_BARRIER) { - ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_BARRIER); - - /* - * Is it possible for another commit to fail at roughly - * the same time as this one? If so, we don't want to - * trust the barrier flag in the super, but instead want - * to remember if we sent a barrier request - */ - if (ret == -EOPNOTSUPP) { - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: barrier-based sync failed on %s - " - "disabling barriers\n", - bdevname(journal->j_dev, b)); - spin_lock(&journal->j_state_lock); - journal->j_flags &= ~JFS_BARRIER; - spin_unlock(&journal->j_state_lock); - - /* And try again, without the barrier */ - set_buffer_uptodate(bh); - set_buffer_dirty(bh); - ret = sync_dirty_buffer(bh); - } - } else { + if (journal->j_flags & JFS_BARRIER) + ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_FLUSH_FUA); + else ret = sync_dirty_buffer(bh); - } put_bh(bh); /* One for getblk() */ journal_put_journal_head(descriptor); -- cgit v1.1 From f73bee49855fe968e87af18e44f2d17e1e675e74 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 18 Aug 2010 15:56:56 +0200 Subject: jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier Currently JBD2 relies blkdev_issue_flush() draining the queue when ASYNC_COMMIT feature is set. This property is going away so make JBD2 wait for buffers it needs on its own before submitting the cache flush. Signed-off-by: Jan Kara Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/jbd2/commit.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 7c068c1..d6aeb1f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -701,6 +701,16 @@ start_journal_io: } } + err = journal_finish_inode_data_buffers(journal, commit_transaction); + if (err) { + printk(KERN_WARNING + "JBD2: Detected IO errors while flushing file data " + "on %s\n", journal->j_devname); + if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR) + jbd2_journal_abort(journal, err); + err = 0; + } + /* * If the journal is not located on the file system device, * then we must flush the file system device before we issue @@ -719,19 +729,6 @@ start_journal_io: &cbh, crc32_sum); if (err) __jbd2_journal_abort_hard(journal); - if (journal->j_flags & JBD2_BARRIER) - blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); - } - - err = journal_finish_inode_data_buffers(journal, commit_transaction); - if (err) { - printk(KERN_WARNING - "JBD2: Detected IO errors while flushing file data " - "on %s\n", journal->j_devname); - if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR) - jbd2_journal_abort(journal, err); - err = 0; } /* Lo and behold: we have just managed to send a transaction to @@ -845,6 +842,12 @@ wait_for_iobuf: } if (!err && !is_journal_aborted(journal)) err = journal_wait_on_commit_record(journal, cbh); + if (JBD2_HAS_INCOMPAT_FEATURE(journal, + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) && + journal->j_flags & JBD2_BARRIER) { + blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL, + BLKDEV_IFL_WAIT); + } if (err) jbd2_journal_abort(journal, err); -- cgit v1.1 From 9c35575bbe6b1dd4914a5323c8df8b3159edcc75 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:17 -0400 Subject: jbd2: replace barriers with explicit flush / FUA usage Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the EOPNOTSUPP detection for barriers. Signed-off-by: Christoph Hellwig Acked-by: Jan Kara Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/jbd2/commit.c | 43 ++++--------------------------------------- 1 file changed, 4 insertions(+), 39 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index d6aeb1f..f204e27 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -134,25 +134,11 @@ static int journal_submit_commit_record(journal_t *journal, if (journal->j_flags & JBD2_BARRIER && !JBD2_HAS_INCOMPAT_FEATURE(journal, - JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) { - ret = submit_bh(WRITE_SYNC_PLUG | WRITE_BARRIER, bh); - if (ret == -EOPNOTSUPP) { - printk(KERN_WARNING - "JBD2: Disabling barriers on %s, " - "not supported by device\n", journal->j_devname); - write_lock(&journal->j_state_lock); - journal->j_flags &= ~JBD2_BARRIER; - write_unlock(&journal->j_state_lock); - - /* And try again, without the barrier */ - lock_buffer(bh); - set_buffer_uptodate(bh); - clear_buffer_dirty(bh); - ret = submit_bh(WRITE_SYNC_PLUG, bh); - } - } else { + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) + ret = submit_bh(WRITE_SYNC_PLUG | WRITE_FLUSH_FUA, bh); + else ret = submit_bh(WRITE_SYNC_PLUG, bh); - } + *cbh = bh; return ret; } @@ -166,29 +152,8 @@ static int journal_wait_on_commit_record(journal_t *journal, { int ret = 0; -retry: clear_buffer_dirty(bh); wait_on_buffer(bh); - if (buffer_eopnotsupp(bh) && (journal->j_flags & JBD2_BARRIER)) { - printk(KERN_WARNING - "JBD2: %s: disabling barries on %s - not supported " - "by device\n", __func__, journal->j_devname); - write_lock(&journal->j_state_lock); - journal->j_flags &= ~JBD2_BARRIER; - write_unlock(&journal->j_state_lock); - - lock_buffer(bh); - clear_buffer_dirty(bh); - set_buffer_uptodate(bh); - bh->b_end_io = journal_end_buffer_io_sync; - - ret = submit_bh(WRITE_SYNC_PLUG, bh); - if (ret) { - unlock_buffer(bh); - return ret; - } - goto retry; - } if (unlikely(!buffer_uptodate(bh))) ret = -EIO; -- cgit v1.1 From 61002f7db33c7d064cddcdab680fb750fa43d8fd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:18 -0400 Subject: ext4: do not send discards as barriers ext4 already uses synchronous discards, no need to add I/O barriers. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/ext4/mballoc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index df44b34..a22bfef 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2567,7 +2567,7 @@ static inline void ext4_issue_discard(struct super_block *sb, trace_ext4_discard_blocks(sb, (unsigned long long) discard_block, count); ret = sb_issue_discard(sb, discard_block, count, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + BLKDEV_IFL_WAIT); if (ret == EOPNOTSUPP) { ext4_warning(sb, "discard not supported, disabling"); clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD); -- cgit v1.1 From e045db80d07250312500b2ed707b84dc703189d6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:19 -0400 Subject: fat: do not send discards as barriers fat already uses synchronous discards, no need to add I/O barriers. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/fat/fatent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 3a56a82..f9a0b7a 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -579,7 +579,7 @@ int fat_free_clusters(struct inode *inode, int cluster) fat_clus_to_blknr(sbi, first_cl), nr_clus * sbi->sec_per_clus, GFP_NOFS, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + BLKDEV_IFL_WAIT); first_cl = cluster; } -- cgit v1.1 From 349f429eec36cb743fee20f4c193ecde97a3ed2e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:20 -0400 Subject: swap: do not send discards as barriers The swap code already uses synchronous discards, no need to add I/O barriers. tj: superflous newlines removed. Signed-off-by: Christoph Hellwig Acked-by: Hugh Dickins Tested-by: Nigel Cunningham Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- mm/swapfile.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index 1f3f9c5..68cda16 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -141,8 +141,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = ((sector_t)se->nr_pages - 1) << (PAGE_SHIFT - 9); if (nr_blocks) { err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); if (err) return err; cond_resched(); @@ -153,8 +152,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = (sector_t)se->nr_pages << (PAGE_SHIFT - 9); err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, - BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER); + nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); if (err) break; @@ -193,8 +191,7 @@ static void discard_swap_cluster(struct swap_info_struct *si, start_block <<= PAGE_SHIFT - 9; nr_blocks <<= PAGE_SHIFT - 9; if (blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT | - BLKDEV_IFL_BARRIER)) + nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT)) break; } -- cgit v1.1 From 31725e65c7214b52b607eba705fc4f306be4d5a5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:21 -0400 Subject: block: remove the WRITE_BARRIER flag It's unused now. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/fs.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 352c486..d6add69 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -135,7 +135,6 @@ struct inodes_stat_t { * immediately after submission. The write equivalent * of READ_SYNC. * WRITE_ODIRECT_PLUG Special case write for O_DIRECT only. - * WRITE_BARRIER DEPRECATED. Always fails. Use FLUSH/FUA instead. * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush. * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on * non-volatile media on completion. @@ -157,8 +156,6 @@ struct inodes_stat_t { #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG) #define WRITE_ODIRECT_PLUG (WRITE | REQ_SYNC) #define WRITE_META (WRITE | REQ_META) -#define WRITE_BARRIER (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ - REQ_HARDBARRIER) #define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ REQ_FLUSH) #define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ -- cgit v1.1 From 8c5553678237b7121355108e03c36086037d8975 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:22 -0400 Subject: block: remove the BLKDEV_IFL_BARRIER flag Remove support for barriers on discards, which is unused now. Also remove the DISCARD_NOBARRIER I/O type in favour of just setting the rw flags up locally in blkdev_issue_discard. tj: Also remove DISCARD_SECURE and use REQ_SECURE directly. Signed-off-by: Christoph Hellwig Acked-by: Mike Snitzer Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-lib.c | 18 ++---------------- include/linux/blkdev.h | 2 -- include/linux/fs.h | 8 -------- 3 files changed, 2 insertions(+), 26 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index c392029..fe2e6ed 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -39,8 +39,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, { DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q = bdev_get_queue(bdev); - int type = flags & BLKDEV_IFL_BARRIER ? - DISCARD_BARRIER : DISCARD_NOBARRIER; + int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; struct bio *bio; int ret = 0; @@ -65,7 +64,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (flags & BLKDEV_IFL_SECURE) { if (!blk_queue_secdiscard(q)) return -EOPNOTSUPP; - type |= DISCARD_SECURE; + type |= REQ_SECURE; } while (nr_sects && !ret) { @@ -162,12 +161,6 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, bb.wait = &wait; bb.end_io = NULL; - if (flags & BLKDEV_IFL_BARRIER) { - /* issue async barrier before the data */ - ret = blkdev_issue_flush(bdev, gfp_mask, NULL, 0); - if (ret) - return ret; - } submit: ret = 0; while (nr_sects != 0) { @@ -199,13 +192,6 @@ submit: issued++; submit_bio(WRITE, bio); } - /* - * When all data bios are in flight. Send final barrier if requeted. - */ - if (nr_sects == 0 && flags & BLKDEV_IFL_BARRIER) - ret = blkdev_issue_flush(bdev, gfp_mask, NULL, - flags & BLKDEV_IFL_WAIT); - if (flags & BLKDEV_IFL_WAIT) /* Wait for bios in-flight */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6b305eb..cfcb3a6 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -869,11 +869,9 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt, } enum{ BLKDEV_WAIT, /* wait for completion */ - BLKDEV_BARRIER, /* issue request with barrier */ BLKDEV_SECURE, /* secure discard */ }; #define BLKDEV_IFL_WAIT (1 << BLKDEV_WAIT) -#define BLKDEV_IFL_BARRIER (1 << BLKDEV_BARRIER) #define BLKDEV_IFL_SECURE (1 << BLKDEV_SECURE) extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *, unsigned long); diff --git a/include/linux/fs.h b/include/linux/fs.h index d6add69..6b0f6e9 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -163,14 +163,6 @@ struct inodes_stat_t { #define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_UNPLUG | \ REQ_FLUSH | REQ_FUA) -/* - * These aren't really reads or writes, they pass down information about - * parts of device that are now unused by the file system. - */ -#define DISCARD_NOBARRIER (WRITE | REQ_DISCARD) -#define DISCARD_BARRIER (WRITE | REQ_DISCARD | REQ_HARDBARRIER) -#define DISCARD_SECURE (DISCARD_NOBARRIER | REQ_SECURE) - #define SEL_IN 1 #define SEL_OUT 2 #define SEL_EX 4 -- cgit v1.1 From 0edd55faea7c8081bc826234b917501738a6218f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 18 Aug 2010 05:29:23 -0400 Subject: block: remove the BH_Eopnotsupp flag This flag was only set for barrier buffers, which we don't submit anymore. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/buffer.c | 7 +------ fs/fat/misc.c | 5 +---- include/linux/buffer_head.h | 2 -- 3 files changed, 2 insertions(+), 12 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 3e7dca2..7f0b9b0 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -156,7 +156,7 @@ void end_buffer_write_sync(struct buffer_head *bh, int uptodate) if (uptodate) { set_buffer_uptodate(bh); } else { - if (!buffer_eopnotsupp(bh) && !quiet_error(bh)) { + if (!quiet_error(bh)) { buffer_io_error(bh); printk(KERN_WARNING "lost page write due to " "I/O error on %s\n", @@ -2891,7 +2891,6 @@ static void end_bio_bh_io_sync(struct bio *bio, int err) if (err == -EOPNOTSUPP) { set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); - set_bit(BH_Eopnotsupp, &bh->b_state); } if (unlikely (test_bit(BIO_QUIET,&bio->bi_flags))) @@ -3031,10 +3030,6 @@ int __sync_dirty_buffer(struct buffer_head *bh, int rw) bh->b_end_io = end_buffer_write_sync; ret = submit_bh(rw, bh); wait_on_buffer(bh); - if (buffer_eopnotsupp(bh)) { - clear_buffer_eopnotsupp(bh); - ret = -EOPNOTSUPP; - } if (!ret && !buffer_uptodate(bh)) ret = -EIO; } else { diff --git a/fs/fat/misc.c b/fs/fat/misc.c index 1736f23..970e682 100644 --- a/fs/fat/misc.c +++ b/fs/fat/misc.c @@ -255,10 +255,7 @@ int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs) for (i = 0; i < nr_bhs; i++) { wait_on_buffer(bhs[i]); - if (buffer_eopnotsupp(bhs[i])) { - clear_buffer_eopnotsupp(bhs[i]); - err = -EOPNOTSUPP; - } else if (!err && !buffer_uptodate(bhs[i])) + if (!err && !buffer_uptodate(bhs[i])) err = -EIO; } return err; diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index fc999f5..dd1b25b 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -32,7 +32,6 @@ enum bh_state_bits { BH_Delay, /* Buffer is not yet allocated on disk */ BH_Boundary, /* Block is followed by a discontiguity */ BH_Write_EIO, /* I/O error on write */ - BH_Eopnotsupp, /* DEPRECATED: operation not supported (barrier) */ BH_Unwritten, /* Buffer is allocated on disk but not written */ BH_Quiet, /* Buffer Error Prinks to be quiet */ @@ -124,7 +123,6 @@ BUFFER_FNS(Async_Write, async_write) BUFFER_FNS(Delay, delay) BUFFER_FNS(Boundary, boundary) BUFFER_FNS(Write_EIO, write_io_error) -BUFFER_FNS(Eopnotsupp, eopnotsupp) BUFFER_FNS(Unwritten, unwritten) #define bh_offset(bh) ((unsigned long)(bh)->b_data & ~PAGE_MASK) -- cgit v1.1 From 8786fb70ccb36c7cff64680bb80c46d3a09d44db Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 16 Sep 2010 08:27:34 +0200 Subject: aic7xxx_old: removed unused 'req' variable After the patch "block: remove spurious uses of REQ_HARDBARRIER", we no longer use 'req' in aic7xxx_buildscb(). Kill it. Reported-by: Stephen Rothwell Signed-off-by: Jens Axboe --- drivers/scsi/aic7xxx_old.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index e1cd606..aee73fa 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -10119,7 +10119,6 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd, struct aic_dev_data *aic_dev = cmd->device->hostdata; struct scsi_device *sdptr = cmd->device; unsigned char tindex = TARGET_INDEX(cmd); - struct request *req = cmd->request; int use_sg; mask = (0x01 << tindex); -- cgit v1.1 From dd3932eddf428571762596e17b65f5dc92ca361b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Sep 2010 20:51:46 +0200 Subject: block: remove BLKDEV_IFL_WAIT All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-flush.c | 25 +++++++++++-------------- block/blk-lib.c | 21 ++++++++------------- block/ioctl.c | 4 ++-- drivers/block/drbd/drbd_int.h | 3 +-- drivers/block/drbd/drbd_receiver.c | 2 +- fs/block_dev.c | 2 +- fs/btrfs/extent-tree.c | 3 +-- fs/ext3/fsync.c | 3 +-- fs/ext4/fsync.c | 5 ++--- fs/ext4/mballoc.c | 3 +-- fs/fat/fatent.c | 3 +-- fs/gfs2/rgrp.c | 5 ++--- fs/jbd2/checkpoint.c | 3 +-- fs/jbd2/commit.c | 6 ++---- fs/nilfs2/the_nilfs.c | 4 ++-- fs/reiserfs/file.c | 3 +-- fs/xfs/linux-2.6/xfs_super.c | 3 +-- include/linux/blkdev.h | 14 +++++--------- mm/swapfile.c | 6 +++--- 19 files changed, 47 insertions(+), 71 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 62b7df9..54b123d 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -205,7 +205,6 @@ static void bio_end_flush(struct bio *bio, int err) * @bdev: blockdev to issue flush for * @gfp_mask: memory allocation flags (for bio_alloc) * @error_sector: error sector - * @flags: BLKDEV_IFL_* flags to control behaviour * * Description: * Issue a flush for the block device in question. Caller can supply @@ -214,7 +213,7 @@ static void bio_end_flush(struct bio *bio, int err) * request was pushed in some internal queue for later handling. */ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, - sector_t *error_sector, unsigned long flags) + sector_t *error_sector) { DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q; @@ -240,21 +239,19 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, bio = bio_alloc(gfp_mask, 0); bio->bi_end_io = bio_end_flush; bio->bi_bdev = bdev; - if (test_bit(BLKDEV_WAIT, &flags)) - bio->bi_private = &wait; + bio->bi_private = &wait; bio_get(bio); submit_bio(WRITE_FLUSH, bio); - if (test_bit(BLKDEV_WAIT, &flags)) { - wait_for_completion(&wait); - /* - * The driver must store the error location in ->bi_sector, if - * it supports it. For non-stacked drivers, this should be - * copied from blk_rq_pos(rq). - */ - if (error_sector) - *error_sector = bio->bi_sector; - } + wait_for_completion(&wait); + + /* + * The driver must store the error location in ->bi_sector, if + * it supports it. For non-stacked drivers, this should be + * copied from blk_rq_pos(rq). + */ + if (error_sector) + *error_sector = bio->bi_sector; if (!bio_flagged(bio, BIO_UPTODATE)) ret = -EIO; diff --git a/block/blk-lib.c b/block/blk-lib.c index fe2e6ed..1a320d2 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -61,7 +61,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, max_discard_sectors &= ~(disc_sects - 1); } - if (flags & BLKDEV_IFL_SECURE) { + if (flags & BLKDEV_DISCARD_SECURE) { if (!blk_queue_secdiscard(q)) return -EOPNOTSUPP; type |= REQ_SECURE; @@ -77,8 +77,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bio->bi_sector = sector; bio->bi_end_io = blkdev_discard_end_io; bio->bi_bdev = bdev; - if (flags & BLKDEV_IFL_WAIT) - bio->bi_private = &wait; + bio->bi_private = &wait; if (nr_sects > max_discard_sectors) { bio->bi_size = max_discard_sectors << 9; @@ -92,8 +91,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bio_get(bio); submit_bio(type, bio); - if (flags & BLKDEV_IFL_WAIT) - wait_for_completion(&wait); + wait_for_completion(&wait); if (bio_flagged(bio, BIO_EOPNOTSUPP)) ret = -EOPNOTSUPP; @@ -139,7 +137,6 @@ static void bio_batch_end_io(struct bio *bio, int err) * @sector: start sector * @nr_sects: number of sectors to write * @gfp_mask: memory allocation flags (for bio_alloc) - * @flags: BLKDEV_IFL_* flags to control behaviour * * Description: * Generate and issue number of bios with zerofiled pages. @@ -148,7 +145,7 @@ static void bio_batch_end_io(struct bio *bio, int err) */ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, - sector_t nr_sects, gfp_t gfp_mask, unsigned long flags) + sector_t nr_sects, gfp_t gfp_mask) { int ret; struct bio *bio; @@ -174,8 +171,7 @@ submit: bio->bi_sector = sector; bio->bi_bdev = bdev; bio->bi_end_io = bio_batch_end_io; - if (flags & BLKDEV_IFL_WAIT) - bio->bi_private = &bb; + bio->bi_private = &bb; while (nr_sects != 0) { sz = min((sector_t) PAGE_SIZE >> 9 , nr_sects); @@ -193,10 +189,9 @@ submit: submit_bio(WRITE, bio); } - if (flags & BLKDEV_IFL_WAIT) - /* Wait for bios in-flight */ - while ( issued != atomic_read(&bb.done)) - wait_for_completion(&wait); + /* Wait for bios in-flight */ + while (issued != atomic_read(&bb.done)) + wait_for_completion(&wait); if (!test_bit(BIO_UPTODATE, &bb.flags)) /* One of bios in the batch was completed with error.*/ diff --git a/block/ioctl.c b/block/ioctl.c index d8052f0..cb2b909 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -116,7 +116,7 @@ static int blkdev_reread_part(struct block_device *bdev) static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, uint64_t len, int secure) { - unsigned long flags = BLKDEV_IFL_WAIT; + unsigned long flags = 0; if (start & 511) return -EINVAL; @@ -128,7 +128,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, if (start + len > (bdev->bd_inode->i_size >> 9)) return -EINVAL; if (secure) - flags |= BLKDEV_IFL_SECURE; + flags |= BLKDEV_DISCARD_SECURE; return blkdev_issue_discard(bdev, start, len, GFP_KERNEL, flags); } diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 352441b..c2ef476 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -2321,8 +2321,7 @@ static inline void drbd_md_flush(struct drbd_conf *mdev) if (test_bit(MD_NO_BARRIER, &mdev->flags)) return; - r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL); if (r) { set_bit(MD_NO_BARRIER, &mdev->flags); dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r); diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 081522d..df15e7f 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -975,7 +975,7 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d if (mdev->write_ordering >= WO_bdev_flush && get_ldev(mdev)) { rv = blkdev_issue_flush(mdev->ldev->backing_bdev, GFP_KERNEL, - NULL, BLKDEV_IFL_WAIT); + NULL); if (rv) { dev_err(DEV, "local disk flush failed with status %d\n", rv); /* would rather check on EOPNOTSUPP, but that is not reliable. diff --git a/fs/block_dev.c b/fs/block_dev.c index 50e8c85..b737451 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -370,7 +370,7 @@ int blkdev_fsync(struct file *filp, int datasync) */ mutex_unlock(&bd_inode->i_mutex); - error = blkdev_issue_flush(bdev, GFP_KERNEL, NULL, BLKDEV_IFL_WAIT); + error = blkdev_issue_flush(bdev, GFP_KERNEL, NULL); if (error == -EOPNOTSUPP) error = 0; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 43dc9ea..0b81ecd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1695,8 +1695,7 @@ static int remove_extent_backref(struct btrfs_trans_handle *trans, static void btrfs_issue_discard(struct block_device *bdev, u64 start, u64 len) { - blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL, - BLKDEV_IFL_WAIT); + blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL, 0); } static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr, diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index d7e9f74..09b13bb 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -90,7 +90,6 @@ int ext3_sync_file(struct file *file, int datasync) * storage */ if (needs_barrier) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); return ret; } diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c index 592adf2..3f3ff5e 100644 --- a/fs/ext4/fsync.c +++ b/fs/ext4/fsync.c @@ -128,10 +128,9 @@ int ext4_sync_file(struct file *file, int datasync) (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, - NULL, BLKDEV_IFL_WAIT); + NULL); ret = jbd2_log_wait_commit(journal, commit_tid); } else if (journal->j_flags & JBD2_BARRIER) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); return ret; } diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a22bfef..19aa0d4 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2566,8 +2566,7 @@ static inline void ext4_issue_discard(struct super_block *sb, discard_block = block + ext4_group_first_block_no(sb, block_group); trace_ext4_discard_blocks(sb, (unsigned long long) discard_block, count); - ret = sb_issue_discard(sb, discard_block, count, GFP_NOFS, - BLKDEV_IFL_WAIT); + ret = sb_issue_discard(sb, discard_block, count, GFP_NOFS, 0); if (ret == EOPNOTSUPP) { ext4_warning(sb, "discard not supported, disabling"); clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD); diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index f9a0b7a..b47d2c9 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -578,8 +578,7 @@ int fat_free_clusters(struct inode *inode, int cluster) sb_issue_discard(sb, fat_clus_to_blknr(sbi, first_cl), nr_clus * sbi->sec_per_clus, - GFP_NOFS, - BLKDEV_IFL_WAIT); + GFP_NOFS, 0); first_cl = cluster; } diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 3793164..38b3ea1 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -854,7 +854,7 @@ static void gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset, if ((start + nr_sects) != blk) { rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT); + 0); if (rv) goto fail; nr_sects = 0; @@ -868,8 +868,7 @@ start_new_extent: } } if (nr_sects) { - rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, - BLKDEV_IFL_WAIT); + rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0); if (rv) goto fail; } diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 5247e7f..6571a05 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -532,8 +532,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal) */ if ((journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); if (!(journal->j_flags & JBD2_ABORT)) jbd2_journal_update_superblock(journal, 1); return 0; diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index f204e27..cb43c60 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -684,8 +684,7 @@ start_journal_io: if (commit_transaction->t_flushed_data_blocks && (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, @@ -810,8 +809,7 @@ wait_for_iobuf: if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) && journal->j_flags & JBD2_BARRIER) { - blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL); } if (err) diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c index 400b2ca..d97310f 100644 --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -774,7 +774,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, BLKDEV_IFL_WAIT); + GFP_NOFS, 0); if (ret < 0) return ret; nblocks = 0; @@ -784,7 +784,7 @@ int nilfs_discard_segments(struct the_nilfs *nilfs, __u64 *segnump, ret = blkdev_issue_discard(nilfs->ns_bdev, start * sects_per_block, nblocks * sects_per_block, - GFP_NOFS, BLKDEV_IFL_WAIT); + GFP_NOFS, 0); return ret; } diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c index 6846371..91f080c 100644 --- a/fs/reiserfs/file.c +++ b/fs/reiserfs/file.c @@ -152,8 +152,7 @@ static int reiserfs_sync_file(struct file *filp, int datasync) barrier_done = reiserfs_commit_for_inode(inode); reiserfs_write_unlock(inode->i_sb); if (barrier_done != 1 && reiserfs_barrier_flush(inode->i_sb)) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); if (barrier_done < 0) return barrier_done; return (err < 0) ? -EIO : 0; diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 15c35b6..5fa7a30 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -693,8 +693,7 @@ void xfs_blkdev_issue_flush( xfs_buftarg_t *buftarg) { - blkdev_issue_flush(buftarg->bt_bdev, GFP_KERNEL, NULL, - BLKDEV_IFL_WAIT); + blkdev_issue_flush(buftarg->bt_bdev, GFP_KERNEL, NULL); } STATIC void diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index cfcb3a6..accbd0e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -867,18 +867,14 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt, return NULL; return bqt->tag_index[tag]; } -enum{ - BLKDEV_WAIT, /* wait for completion */ - BLKDEV_SECURE, /* secure discard */ -}; -#define BLKDEV_IFL_WAIT (1 << BLKDEV_WAIT) -#define BLKDEV_IFL_SECURE (1 << BLKDEV_SECURE) -extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *, - unsigned long); + +#define BLKDEV_DISCARD_SECURE 0x01 /* secure discard */ + +extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *); extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, - sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); + sector_t nr_sects, gfp_t gfp_mask); static inline int sb_issue_discard(struct super_block *sb, sector_t block, sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags) { diff --git a/mm/swapfile.c b/mm/swapfile.c index 68cda16..e132e17 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -141,7 +141,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = ((sector_t)se->nr_pages - 1) << (PAGE_SHIFT - 9); if (nr_blocks) { err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); + nr_blocks, GFP_KERNEL, 0); if (err) return err; cond_resched(); @@ -152,7 +152,7 @@ static int discard_swap(struct swap_info_struct *si) nr_blocks = (sector_t)se->nr_pages << (PAGE_SHIFT - 9); err = blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT); + nr_blocks, GFP_KERNEL, 0); if (err) break; @@ -191,7 +191,7 @@ static void discard_swap_cluster(struct swap_info_struct *si, start_block <<= PAGE_SHIFT - 9; nr_blocks <<= PAGE_SHIFT - 9; if (blkdev_issue_discard(si->bdev, start_block, - nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT)) + nr_blocks, GFP_NOIO, 0)) break; } -- cgit v1.1 From 4d1529043705737ba442f5a0048043718e601ce4 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 21 Oct 2010 14:54:19 +0200 Subject: Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c Signed-off-by: Mike Snitzer Signed-off-by: Jens Axboe --- Documentation/DocBook/kernel-api.tmpl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 6899f47..6b4e07f 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -257,7 +257,8 @@ X!Earch/x86/kernel/mca_32.c !Iblock/blk-sysfs.c !Eblock/blk-settings.c !Eblock/blk-exec.c -!Eblock/blk-barrier.c +!Eblock/blk-flush.c +!Eblock/blk-lib.c !Eblock/blk-tag.c !Iblock/blk-tag.c !Eblock/blk-integrity.c -- cgit v1.1 From 005a1d15f5a6b2bb4ada80349513effbf22b4588 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 22 Oct 2010 10:58:33 +0200 Subject: xen-blkfront: disable barrier/flush write support The driver doesn't handle empty flushes. Disable barrier/flush write support until this is fixed up. Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index f2ffc46..739b4c1 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1067,8 +1067,15 @@ static void blkfront_connect(struct blkfront_info *info) * If there are barriers, then we use flush. */ info->feature_flush = 0; + + /* + * The driver doesn't properly handled empty flushes, so + * lets disable barrier support for now. + */ +#if 0 if (!err && barrier) info->feature_flush = REQ_FLUSH; +#endif err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size); if (err) { -- cgit v1.1