From ab2c0672984f7f7ebec6d5f615fd5a6ebad26f3d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 4 Dec 2009 10:55:24 +1000 Subject: drm/intel: refactor DP i2c support and DP common header to drm helper Both radeon and nouveau can re-use this code so move it up a level so they can. However the hw interfaces for aux ch are different enough that the code to translate from mode, address, bytes to actual hw interfaces isn't generic, so move that code into the Intel driver. Signed-off-by: Dave Airlie --- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_dp_i2c_helper.c | 209 +++++++++++++++++++++++++++ drivers/gpu/drm/i915/Makefile | 1 - drivers/gpu/drm/i915/intel_display.c | 2 +- drivers/gpu/drm/i915/intel_dp.c | 72 ++++++++- drivers/gpu/drm/i915/intel_dp.h | 144 ------------------ drivers/gpu/drm/i915/intel_dp_i2c.c | 273 ----------------------------------- include/drm/drm_dp_helper.h | 149 +++++++++++++++++++ 8 files changed, 426 insertions(+), 426 deletions(-) create mode 100644 drivers/gpu/drm/drm_dp_i2c_helper.c delete mode 100644 drivers/gpu/drm/i915/intel_dp.h delete mode 100644 drivers/gpu/drm/i915/intel_dp_i2c.c create mode 100644 include/drm/drm_dp_helper.h diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 3c8827a..91567ac 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -15,7 +15,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm-$(CONFIG_COMPAT) += drm_ioc32.o -drm_kms_helper-y := drm_fb_helper.o drm_crtc_helper.o +drm_kms_helper-y := drm_fb_helper.o drm_crtc_helper.o drm_dp_i2c_helper.o obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o diff --git a/drivers/gpu/drm/drm_dp_i2c_helper.c b/drivers/gpu/drm/drm_dp_i2c_helper.c new file mode 100644 index 0000000..f1c7c85 --- /dev/null +++ b/drivers/gpu/drm/drm_dp_i2c_helper.c @@ -0,0 +1,209 @@ +/* + * Copyright © 2009 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "drm_dp_helper.h" +#include "drmP.h" + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + ret = (*algo_data->aux_ch)(adapter, mode, + write_byte, read_byte); + return ret; +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + DRM_DEBUG("dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); + +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} +EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index fa7b9be..e3d0492 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -15,7 +15,6 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ intel_lvds.o \ intel_bios.o \ intel_dp.o \ - intel_dp_i2c.o \ intel_hdmi.o \ intel_sdvo.o \ intel_modes.o \ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3ba6546b..ccd180d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -32,7 +32,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" -#include "intel_dp.h" +#include "drm_dp_helper.h" #include "drm_crtc_helper.h" diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d834475..63424d5 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -33,7 +33,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" -#include "intel_dp.h" +#include "drm_dp_helper.h" #define DP_LINK_STATUS_SIZE 6 #define DP_LINK_CHECK_TIMEOUT (10 * 1000) @@ -382,17 +382,77 @@ intel_dp_aux_native_read(struct intel_output *intel_output, } static int -intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, - uint8_t *send, int send_bytes, - uint8_t *recv, int recv_bytes) +intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) { + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; struct intel_dp_priv *dp_priv = container_of(adapter, struct intel_dp_priv, adapter); struct intel_output *intel_output = dp_priv->intel_output; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } - return intel_dp_aux_ch(intel_output, - send, send_bytes, recv, recv_bytes); + for (;;) { + ret = intel_dp_aux_ch(intel_output, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + DRM_DEBUG("aux_ch failed %d\n", ret); + return ret; + } + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + DRM_DEBUG("aux_ch nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + DRM_DEBUG("aux_ch defer\n"); + udelay(100); + break; + default: + DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } } static int diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h deleted file mode 100644 index 2b38054..0000000 --- a/drivers/gpu/drm/i915/intel_dp.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright © 2008 Keith Packard - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of the copyright holders not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. The copyright holders make no representations - * about the suitability of this software for any purpose. It is provided "as - * is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - */ - -#ifndef _INTEL_DP_H_ -#define _INTEL_DP_H_ - -/* From the VESA DisplayPort spec */ - -#define AUX_NATIVE_WRITE 0x8 -#define AUX_NATIVE_READ 0x9 -#define AUX_I2C_WRITE 0x0 -#define AUX_I2C_READ 0x1 -#define AUX_I2C_STATUS 0x2 -#define AUX_I2C_MOT 0x4 - -#define AUX_NATIVE_REPLY_ACK (0x0 << 4) -#define AUX_NATIVE_REPLY_NACK (0x1 << 4) -#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) -#define AUX_NATIVE_REPLY_MASK (0x3 << 4) - -#define AUX_I2C_REPLY_ACK (0x0 << 6) -#define AUX_I2C_REPLY_NACK (0x1 << 6) -#define AUX_I2C_REPLY_DEFER (0x2 << 6) -#define AUX_I2C_REPLY_MASK (0x3 << 6) - -/* AUX CH addresses */ -#define DP_LINK_BW_SET 0x100 -# define DP_LINK_BW_1_62 0x06 -# define DP_LINK_BW_2_7 0x0a - -#define DP_LANE_COUNT_SET 0x101 -# define DP_LANE_COUNT_MASK 0x0f -# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) - -#define DP_TRAINING_PATTERN_SET 0x102 - -# define DP_TRAINING_PATTERN_DISABLE 0 -# define DP_TRAINING_PATTERN_1 1 -# define DP_TRAINING_PATTERN_2 2 -# define DP_TRAINING_PATTERN_MASK 0x3 - -# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) -# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) -# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) -# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) -# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) - -# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) -# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) - -# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) -# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) -# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) -# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) - -#define DP_TRAINING_LANE0_SET 0x103 -#define DP_TRAINING_LANE1_SET 0x104 -#define DP_TRAINING_LANE2_SET 0x105 -#define DP_TRAINING_LANE3_SET 0x106 - -# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 -# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 -# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) -# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) -# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) -# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) -# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) - -# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) -# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) -# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) -# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) -# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) - -# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 -# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) - -#define DP_DOWNSPREAD_CTRL 0x107 -# define DP_SPREAD_AMP_0_5 (1 << 4) - -#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 -# define DP_SET_ANSI_8B10B (1 << 0) - -#define DP_LANE0_1_STATUS 0x202 -#define DP_LANE2_3_STATUS 0x203 - -# define DP_LANE_CR_DONE (1 << 0) -# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) -# define DP_LANE_SYMBOL_LOCKED (1 << 2) - -#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 - -#define DP_INTERLANE_ALIGN_DONE (1 << 0) -#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) -#define DP_LINK_STATUS_UPDATED (1 << 7) - -#define DP_SINK_STATUS 0x205 - -#define DP_RECEIVE_PORT_0_STATUS (1 << 0) -#define DP_RECEIVE_PORT_1_STATUS (1 << 1) - -#define DP_ADJUST_REQUEST_LANE0_1 0x206 -#define DP_ADJUST_REQUEST_LANE2_3 0x207 - -#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 -#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 -#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c -#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 -#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 -#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 -#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 -#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 - -struct i2c_algo_dp_aux_data { - bool running; - u16 address; - int (*aux_ch) (struct i2c_adapter *adapter, - uint8_t *send, int send_bytes, - uint8_t *recv, int recv_bytes); -}; - -int -i2c_dp_aux_add_bus(struct i2c_adapter *adapter); - -#endif /* _INTEL_DP_H_ */ diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c deleted file mode 100644 index a63b6f5..0000000 --- a/drivers/gpu/drm/i915/intel_dp_i2c.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright © 2009 Keith Packard - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of the copyright holders not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. The copyright holders make no representations - * about the suitability of this software for any purpose. It is provided "as - * is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "intel_dp.h" -#include "drmP.h" - -/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ - -#define MODE_I2C_START 1 -#define MODE_I2C_WRITE 2 -#define MODE_I2C_READ 4 -#define MODE_I2C_STOP 8 - -static int -i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, - uint8_t write_byte, uint8_t *read_byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - uint16_t address = algo_data->address; - uint8_t msg[5]; - uint8_t reply[2]; - int msg_bytes; - int reply_bytes; - int ret; - - /* Set up the command byte */ - if (mode & MODE_I2C_READ) - msg[0] = AUX_I2C_READ << 4; - else - msg[0] = AUX_I2C_WRITE << 4; - - if (!(mode & MODE_I2C_STOP)) - msg[0] |= AUX_I2C_MOT << 4; - - msg[1] = address >> 8; - msg[2] = address; - - switch (mode) { - case MODE_I2C_WRITE: - msg[3] = 0; - msg[4] = write_byte; - msg_bytes = 5; - reply_bytes = 1; - break; - case MODE_I2C_READ: - msg[3] = 0; - msg_bytes = 4; - reply_bytes = 2; - break; - default: - msg_bytes = 3; - reply_bytes = 1; - break; - } - - for (;;) { - ret = (*algo_data->aux_ch)(adapter, - msg, msg_bytes, - reply, reply_bytes); - if (ret < 0) { - DRM_DEBUG("aux_ch failed %d\n", ret); - return ret; - } - switch (reply[0] & AUX_I2C_REPLY_MASK) { - case AUX_I2C_REPLY_ACK: - if (mode == MODE_I2C_READ) { - *read_byte = reply[1]; - } - return reply_bytes - 1; - case AUX_I2C_REPLY_NACK: - DRM_DEBUG("aux_ch nack\n"); - return -EREMOTEIO; - case AUX_I2C_REPLY_DEFER: - DRM_DEBUG("aux_ch defer\n"); - udelay(100); - break; - default: - DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]); - return -EREMOTEIO; - } - } -} - -/* - * I2C over AUX CH - */ - -/* - * Send the address. If the I2C link is running, this 'restarts' - * the connection with the new address, this is used for doing - * a write followed by a read (as needed for DDC) - */ -static int -i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int mode = MODE_I2C_START; - int ret; - - if (reading) - mode |= MODE_I2C_READ; - else - mode |= MODE_I2C_WRITE; - algo_data->address = address; - algo_data->running = true; - ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); - return ret; -} - -/* - * Stop the I2C transaction. This closes out the link, sending - * a bare address packet with the MOT bit turned off - */ -static void -i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int mode = MODE_I2C_STOP; - - if (reading) - mode |= MODE_I2C_READ; - else - mode |= MODE_I2C_WRITE; - if (algo_data->running) { - (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); - algo_data->running = false; - } -} - -/* - * Write a single byte to the current I2C address, the - * the I2C link must be running or this returns -EIO - */ -static int -i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int ret; - - if (!algo_data->running) - return -EIO; - - ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); - return ret; -} - -/* - * Read a single byte from the current I2C address, the - * I2C link must be running or this returns -EIO - */ -static int -i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int ret; - - if (!algo_data->running) - return -EIO; - - ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); - return ret; -} - -static int -i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, - struct i2c_msg *msgs, - int num) -{ - int ret = 0; - bool reading = false; - int m; - int b; - - for (m = 0; m < num; m++) { - u16 len = msgs[m].len; - u8 *buf = msgs[m].buf; - reading = (msgs[m].flags & I2C_M_RD) != 0; - ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); - if (ret < 0) - break; - if (reading) { - for (b = 0; b < len; b++) { - ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); - if (ret < 0) - break; - } - } else { - for (b = 0; b < len; b++) { - ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); - if (ret < 0) - break; - } - } - if (ret < 0) - break; - } - if (ret >= 0) - ret = num; - i2c_algo_dp_aux_stop(adapter, reading); - DRM_DEBUG("dp_aux_xfer return %d\n", ret); - return ret; -} - -static u32 -i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | - I2C_FUNC_SMBUS_READ_BLOCK_DATA | - I2C_FUNC_SMBUS_BLOCK_PROC_CALL | - I2C_FUNC_10BIT_ADDR; -} - -static const struct i2c_algorithm i2c_dp_aux_algo = { - .master_xfer = i2c_algo_dp_aux_xfer, - .functionality = i2c_algo_dp_aux_functionality, -}; - -static void -i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) -{ - (void) i2c_algo_dp_aux_address(adapter, 0, false); - (void) i2c_algo_dp_aux_stop(adapter, false); - -} - -static int -i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) -{ - adapter->algo = &i2c_dp_aux_algo; - adapter->retries = 3; - i2c_dp_aux_reset_bus(adapter); - return 0; -} - -int -i2c_dp_aux_add_bus(struct i2c_adapter *adapter) -{ - int error; - - error = i2c_dp_aux_prepare_bus(adapter); - if (error) - return error; - error = i2c_add_adapter(adapter); - return error; -} -EXPORT_SYMBOL(i2c_dp_aux_add_bus); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h new file mode 100644 index 0000000..e49879c --- /dev/null +++ b/include/drm/drm_dp_helper.h @@ -0,0 +1,149 @@ +/* + * Copyright © 2008 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _DRM_DP_HELPER_H_ +#define _DRM_DP_HELPER_H_ + +/* From the VESA DisplayPort spec */ + +#define AUX_NATIVE_WRITE 0x8 +#define AUX_NATIVE_READ 0x9 +#define AUX_I2C_WRITE 0x0 +#define AUX_I2C_READ 0x1 +#define AUX_I2C_STATUS 0x2 +#define AUX_I2C_MOT 0x4 + +#define AUX_NATIVE_REPLY_ACK (0x0 << 4) +#define AUX_NATIVE_REPLY_NACK (0x1 << 4) +#define AUX_NATIVE_REPLY_DEFER (0x2 << 4) +#define AUX_NATIVE_REPLY_MASK (0x3 << 4) + +#define AUX_I2C_REPLY_ACK (0x0 << 6) +#define AUX_I2C_REPLY_NACK (0x1 << 6) +#define AUX_I2C_REPLY_DEFER (0x2 << 6) +#define AUX_I2C_REPLY_MASK (0x3 << 6) + +/* AUX CH addresses */ +#define DP_LINK_BW_SET 0x100 +# define DP_LINK_BW_1_62 0x06 +# define DP_LINK_BW_2_7 0x0a + +#define DP_LANE_COUNT_SET 0x101 +# define DP_LANE_COUNT_MASK 0x0f +# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7) + +#define DP_TRAINING_PATTERN_SET 0x102 + +# define DP_TRAINING_PATTERN_DISABLE 0 +# define DP_TRAINING_PATTERN_1 1 +# define DP_TRAINING_PATTERN_2 2 +# define DP_TRAINING_PATTERN_MASK 0x3 + +# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) + +# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) +# define DP_LINK_SCRAMBLING_DISABLE (1 << 5) + +# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6) +# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6) +# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6) +# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6) + +#define DP_TRAINING_LANE0_SET 0x103 +#define DP_TRAINING_LANE1_SET 0x104 +#define DP_TRAINING_LANE2_SET 0x105 +#define DP_TRAINING_LANE3_SET 0x106 + +# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3 +# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0 +# define DP_TRAIN_MAX_SWING_REACHED (1 << 2) +# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0) +# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0) +# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0) +# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0) + +# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3) +# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3) +# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3) +# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3) +# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3) + +# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3 +# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5) + +#define DP_DOWNSPREAD_CTRL 0x107 +# define DP_SPREAD_AMP_0_5 (1 << 4) + +#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108 +# define DP_SET_ANSI_8B10B (1 << 0) + +#define DP_LANE0_1_STATUS 0x202 +#define DP_LANE2_3_STATUS 0x203 + +# define DP_LANE_CR_DONE (1 << 0) +# define DP_LANE_CHANNEL_EQ_DONE (1 << 1) +# define DP_LANE_SYMBOL_LOCKED (1 << 2) + +#define DP_LANE_ALIGN_STATUS_UPDATED 0x204 + +#define DP_INTERLANE_ALIGN_DONE (1 << 0) +#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6) +#define DP_LINK_STATUS_UPDATED (1 << 7) + +#define DP_SINK_STATUS 0x205 + +#define DP_RECEIVE_PORT_0_STATUS (1 << 0) +#define DP_RECEIVE_PORT_1_STATUS (1 << 1) + +#define DP_ADJUST_REQUEST_LANE0_1 0x206 +#define DP_ADJUST_REQUEST_LANE2_3 0x207 + +#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03 +#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0 +#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c +#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30 +#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0 +#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6 + +#define MODE_I2C_START 1 +#define MODE_I2C_WRITE 2 +#define MODE_I2C_READ 4 +#define MODE_I2C_STOP 8 + +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + int mode, uint8_t write_byte, + uint8_t *read_byte); +}; + +int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter); + +#endif /* _DRM_DP_HELPER_H_ */ -- cgit v1.1