From b2b3c121076961333977f485f0d54c22121df920 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Mon, 17 Jul 2006 07:22:45 -0600 Subject: [SCSI] sym2: claim only "Storage" class The follow patch fixes a problem for Matt Taggart. The Compaq system he had (dl380?) has a SmartArray device that exposes the 53c1510 device in both RAID and "normal" modes. The difference is in RAID mode, the smart array driver (IIRC) should claim the device instead of sym2 driver. Patch below prevents sym2 from claiming the device when the RAID "daughter board" is attached. Signed-off-by: Grant Grundler Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 8c50507..739d3ef 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -2084,7 +2084,7 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895, -- cgit v1.1 From 8d4fbd3f978ba49498dc7c6430368c4ff86a09fc Mon Sep 17 00:00:00 2001 From: HighPoint Linux Team Date: Mon, 24 Jul 2006 15:48:54 +0800 Subject: [SCSI] hptiop: wrong register used in hptiop_reset_hba() IOP reset message should be posted to inbound message register instead of outbound message register. Signed-off-by: HighPoint Linux Team Signed-off-by: James Bottomley --- drivers/scsi/hptiop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index ab2f8b2..74d4d22 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -577,7 +577,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) if (atomic_xchg(&hba->resetting, 1) == 0) { atomic_inc(&hba->reset_count); writel(IOPMU_INBOUND_MSG0_RESET, - &hba->iop->outbound_msgaddr0); + &hba->iop->inbound_msgaddr0); hptiop_pci_posting_flush(hba->iop); } -- cgit v1.1 From d82967c70658a408ea6cae5dc989ba8b2c0999e1 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:11 -0500 Subject: [SCSI] iscsi bugfixes: send correct error values to userspace In the xmit patch we are sending a -EXXX value to iscsi_conn_failure which is causing userspace to get confused. We should be sending a ISCSI_ERR_* value that userspace understands. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 848fb2a..88dafdf 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -843,7 +843,7 @@ more: if (rc == -EAGAIN) goto nomore; else { - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } } @@ -859,7 +859,7 @@ more: } tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; } else if (rc) { - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } } @@ -897,7 +897,7 @@ more: if (rc) { if (rc == -EAGAIN) goto again; - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } tcp_conn->in.copy -= tcp_conn->in.padding; -- cgit v1.1 From b6c395ed0387c824ddf125d3b74b576a2575c149 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:15 -0500 Subject: [SCSI] iscsi bugfixes: fix r2t handling The iscsi tcp code can pluck multiple rt2s from the tasks's r2tqueue in the xmit code. This can result in the task being queued on the xmit queue but gettting completed at the same time. This patch fixes the above bug by making the fifo a list so we always remove the entry on the list del. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 45 +++++++++++------------- drivers/scsi/libiscsi.c | 90 ++++++++++++++++++++---------------------------- include/scsi/libiscsi.h | 10 +++++- 3 files changed, 68 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 88dafdf..ab324d9 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -185,11 +185,19 @@ iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn) * must be called with session lock */ static void -__iscsi_ctask_cleanup(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct iscsi_r2t_info *r2t; struct scsi_cmnd *sc; + /* flush ctask's r2t queues */ + while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) { + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n"); + } + sc = ctask->sc; if (unlikely(!sc)) return; @@ -374,6 +382,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) spin_unlock(&session->lock); return 0; } + rc = __kfifo_get(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); BUG_ON(!rc); @@ -399,7 +408,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->exp_r2tsn = r2tsn + 1; tcp_ctask->xmstate |= XMSTATE_SOL_HDR; __kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_move_tail(&ctask->running, &conn->xmitqueue); scsi_queue_work(session->host, &conn->xmitwork); conn->r2t_pdus_cnt++; @@ -484,7 +493,7 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) goto copy_hdr; spin_lock(&session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); + iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask); rc = __iscsi_complete_pdu(conn, hdr, NULL, 0); spin_unlock(&session->lock); break; @@ -745,10 +754,11 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) done: /* check for non-exceptional status */ if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) { - debug_scsi("done [sc %lx res %d itt 0x%x]\n", - (long)sc, sc->result, ctask->itt); + debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n", + (long)sc, sc->result, ctask->itt, + tcp_conn->in.hdr->flags); spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, ctask); + iscsi_tcp_cleanup_ctask(conn, ctask); __iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0); spin_unlock(&conn->session->lock); } @@ -769,7 +779,7 @@ iscsi_data_recv(struct iscsi_conn *conn) break; case ISCSI_OP_SCSI_CMD_RSP: spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); + iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask); spin_unlock(&conn->session->lock); case ISCSI_OP_TEXT_RSP: case ISCSI_OP_LOGIN_RSP: @@ -1308,7 +1318,7 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) ctask->imm_count - ctask->unsol_count; - debug_scsi("cmd [itt %x total %d imm %d imm_data %d " + debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d " "r2t_data %d]\n", ctask->itt, ctask->total_length, ctask->imm_count, ctask->unsol_count, tcp_ctask->r2t_data_count); @@ -1636,7 +1646,7 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } solicit_again: /* - * send Data-Out whitnin this R2T sequence. + * send Data-Out within this R2T sequence. */ if (!r2t->data_count) goto data_out_done; @@ -1731,7 +1741,7 @@ handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_data_task *dtask = tcp_ctask->dtask; - int sent, rc; + int sent = 0, rc; tcp_ctask->xmstate &= ~XMSTATE_W_PAD; iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, @@ -2002,20 +2012,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, } static void -iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_r2t_info *r2t; - - /* flush ctask's r2t queues */ - while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) - __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, - sizeof(void*)); - - __iscsi_ctask_cleanup(conn, ctask); -} - -static void iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn) { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; @@ -2057,6 +2053,7 @@ iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr, sizeof(struct iscsi_hdr)); tcp_mtask->xmstate = XMSTATE_IMM_HDR; + tcp_mtask->sent = 0; if (mtask->data_count) iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data, diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7e6e031..1a8cd20 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -189,6 +189,7 @@ static void iscsi_complete_command(struct iscsi_session *session, { struct scsi_cmnd *sc = ctask->sc; + ctask->state = ISCSI_TASK_COMPLETED; ctask->sc = NULL; list_del_init(&ctask->running); __kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*)); @@ -568,20 +569,24 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) } /* process command queue */ - while (__kfifo_get(conn->xmitqueue, (void*)&conn->ctask, - sizeof(void*))) { + spin_lock_bh(&conn->session->lock); + while (!list_empty(&conn->xmitqueue)) { /* * iscsi tcp may readd the task to the xmitqueue to send * write data */ - spin_lock_bh(&conn->session->lock); - if (list_empty(&conn->ctask->running)) - list_add_tail(&conn->ctask->running, &conn->run_list); + conn->ctask = list_entry(conn->xmitqueue.next, + struct iscsi_cmd_task, running); + conn->ctask->state = ISCSI_TASK_RUNNING; + list_move_tail(conn->xmitqueue.next, &conn->run_list); spin_unlock_bh(&conn->session->lock); + rc = tt->xmit_cmd_task(conn, conn->ctask); if (rc) goto again; + spin_lock_bh(&conn->session->lock); } + spin_unlock_bh(&conn->session->lock); /* done with this ctask */ conn->ctask = NULL; @@ -691,6 +696,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) sc->SCp.phase = session->age; sc->SCp.ptr = (char *)ctask; + ctask->state = ISCSI_TASK_PENDING; ctask->mtask = NULL; ctask->conn = conn; ctask->sc = sc; @@ -700,7 +706,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) session->tt->init_cmd_task(ctask); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_add_tail(&ctask->running, &conn->xmitqueue); debug_scsi( "ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n", sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", @@ -977,31 +983,27 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, /* * xmit mutex and session lock must be held */ -#define iscsi_remove_task(tasktype) \ -static struct iscsi_##tasktype * \ -iscsi_remove_##tasktype(struct kfifo *fifo, uint32_t itt) \ -{ \ - int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); \ - struct iscsi_##tasktype *task; \ - \ - debug_scsi("searching %d tasks\n", nr_tasks); \ - \ - for (i = 0; i < nr_tasks; i++) { \ - __kfifo_get(fifo, (void*)&task, sizeof(void*)); \ - debug_scsi("check task %u\n", task->itt); \ - \ - if (task->itt == itt) { \ - debug_scsi("matched task\n"); \ - return task; \ - } \ - \ - __kfifo_put(fifo, (void*)&task, sizeof(void*)); \ - } \ - return NULL; \ -} +static struct iscsi_mgmt_task * +iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt) +{ + int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); + struct iscsi_mgmt_task *task; + + debug_scsi("searching %d tasks\n", nr_tasks); + + for (i = 0; i < nr_tasks; i++) { + __kfifo_get(fifo, (void*)&task, sizeof(void*)); + debug_scsi("check task %u\n", task->itt); + + if (task->itt == itt) { + debug_scsi("matched task\n"); + return task; + } -iscsi_remove_task(mgmt_task); -iscsi_remove_task(cmd_task); + __kfifo_put(fifo, (void*)&task, sizeof(void*)); + } + return NULL; +} static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask) { @@ -1043,7 +1045,6 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; struct iscsi_conn *conn = ctask->conn; struct iscsi_session *session = conn->session; - struct iscsi_cmd_task *pending_ctask; int rc; conn->eh_abort_cnt++; @@ -1071,17 +1072,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; } - /* check for the easy pending cmd abort */ - pending_ctask = iscsi_remove_cmd_task(conn->xmitqueue, ctask->itt); - if (pending_ctask) { - /* iscsi_tcp queues write transfers on the xmitqueue */ - if (list_empty(&pending_ctask->running)) { - debug_scsi("found pending task\n"); - goto success; - } else - __kfifo_put(conn->xmitqueue, (void*)&pending_ctask, - sizeof(void*)); - } + if (ctask->state == ISCSI_TASK_PENDING) + goto success; conn->tmabort_state = TMABORT_INITIAL; @@ -1263,6 +1255,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (cmd_task_size) ctask->dd_data = &ctask[1]; ctask->itt = cmd_i; + INIT_LIST_HEAD(&ctask->running); } spin_lock_init(&session->lock); @@ -1282,6 +1275,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (mgmt_task_size) mtask->dd_data = &mtask[1]; mtask->itt = ISCSI_MGMT_ITT_OFFSET + cmd_i; + INIT_LIST_HEAD(&mtask->running); } if (scsi_add_host(shost, NULL)) @@ -1361,12 +1355,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->tmabort_state = TMABORT_INITIAL; INIT_LIST_HEAD(&conn->run_list); INIT_LIST_HEAD(&conn->mgmt_run_list); - - /* initialize general xmit PDU commands queue */ - conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*), - GFP_KERNEL, NULL); - if (conn->xmitqueue == ERR_PTR(-ENOMEM)) - goto xmitqueue_alloc_fail; + INIT_LIST_HEAD(&conn->xmitqueue); /* initialize general immediate & non-immediate PDU commands queue */ conn->immqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*), @@ -1410,8 +1399,6 @@ login_mtask_alloc_fail: mgmtqueue_alloc_fail: kfifo_free(conn->immqueue); immqueue_alloc_fail: - kfifo_free(conn->xmitqueue); -xmitqueue_alloc_fail: iscsi_destroy_conn(cls_conn); return NULL; } @@ -1489,7 +1476,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1; spin_unlock_bh(&session->lock); - kfifo_free(conn->xmitqueue); kfifo_free(conn->immqueue); kfifo_free(conn->mgmtqueue); @@ -1572,7 +1558,7 @@ static void fail_all_commands(struct iscsi_conn *conn) struct iscsi_cmd_task *ctask, *tmp; /* flush pending */ - while (__kfifo_get(conn->xmitqueue, (void*)&ctask, sizeof(void*))) { + list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) { debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc, ctask->itt); fail_command(conn, ctask, DID_BUS_BUSY << 16); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index ba27608..e71d6e9 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -83,6 +83,12 @@ struct iscsi_mgmt_task { struct list_head running; }; +enum { + ISCSI_TASK_COMPLETED, + ISCSI_TASK_PENDING, + ISCSI_TASK_RUNNING, +}; + struct iscsi_cmd_task { /* * Becuae LLDs allocate their hdr differently, this is a pointer to @@ -101,6 +107,8 @@ struct iscsi_cmd_task { struct iscsi_conn *conn; /* used connection */ struct iscsi_mgmt_task *mtask; /* tmf mtask in progr */ + /* state set/tested under session->lock */ + int state; struct list_head running; /* running cmd list */ void *dd_data; /* driver/transport data */ }; @@ -134,7 +142,7 @@ struct iscsi_conn { struct kfifo *immqueue; /* immediate xmit queue */ struct kfifo *mgmtqueue; /* mgmt (control) xmit queue */ struct list_head mgmt_run_list; /* list of control tasks */ - struct kfifo *xmitqueue; /* data-path cmd queue */ + struct list_head xmitqueue; /* data-path cmd queue */ struct list_head run_list; /* list of cmds in progress */ struct work_struct xmitwork; /* per-conn. xmit workqueue */ /* -- cgit v1.1 From 275fd7d129fdd16d1dc0ec6a8d60bd6b72a76e31 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:17 -0500 Subject: [SCSI] iscsi bugfixes: handle data rsp errors if iscsi_data_rsp fails we must bail out. Since the pdu values like data length are invalid we cannot continue to process the data since it could over run buffers. This fixes a bug with cisco 5428s where that target is sending too much data. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index ab324d9..7d78459 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -486,6 +486,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) case ISCSI_OP_SCSI_DATA_IN: tcp_conn->in.ctask = session->cmds[itt]; rc = iscsi_data_rsp(conn, tcp_conn->in.ctask); + if (rc) + return rc; /* fall through */ case ISCSI_OP_SCSI_CMD_RSP: tcp_conn->in.ctask = session->cmds[itt]; @@ -532,7 +534,7 @@ copy_hdr: * skbs to complete the command then we have to copy the header * for later use */ - if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy < + if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <= (tcp_conn->in.datalen + tcp_conn->in.padding + (conn->datadgst_en ? 4 : 0))) { debug_tcp("Copying header for later use. in.copy %d in.datalen" -- cgit v1.1 From 7ea8b82847293c2311cf08fc3ed31ab0e452a27e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:22 -0500 Subject: [SCSI] iscsi bugfixes: fix abort handling Abort handler fixes. If a connection is dropped and reconnected while an abort is running then we should assume the recovery code will clean up the abort. Not doing so causes a oops. And if a command completes then we get the status for the abort, we do not need to call into the LLD to cleanup the resources. Doing this causes and oops in iser because it ends up freeing some resources twice. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 71 ++++++++++++++++++++++++++++++++----------------- include/scsi/libiscsi.h | 1 + 2 files changed, 47 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 1a8cd20..4e2ca8f 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -276,6 +276,25 @@ out: return rc; } +static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) +{ + struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr; + + conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; + conn->tmfrsp_pdus_cnt++; + + if (conn->tmabort_state != TMABORT_INITIAL) + return; + + if (tmf->response == ISCSI_TMF_RSP_COMPLETE) + conn->tmabort_state = TMABORT_SUCCESS; + else if (tmf->response == ISCSI_TMF_RSP_NO_TASK) + conn->tmabort_state = TMABORT_NOT_FOUND; + else + conn->tmabort_state = TMABORT_FAILED; + wake_up(&conn->ehwait); +} + /** * __iscsi_complete_pdu - complete pdu * @conn: iscsi conn @@ -361,16 +380,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, break; } - conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - conn->tmfrsp_pdus_cnt++; - if (conn->tmabort_state == TMABORT_INITIAL) { - conn->tmabort_state = - ((struct iscsi_tm_rsp *)hdr)-> - response == ISCSI_TMF_RSP_COMPLETE ? - TMABORT_SUCCESS:TMABORT_FAILED; - /* unblock eh_abort() */ - wake_up(&conn->ehwait); - } + iscsi_tmf_rsp(conn, hdr); break; case ISCSI_OP_NOOP_IN: if (hdr->ttt != ISCSI_RESERVED_TAG) { @@ -1029,12 +1039,13 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, { struct scsi_cmnd *sc; - conn->session->tt->cleanup_cmd_task(conn, ctask); - iscsi_ctask_mtask_cleanup(ctask); - sc = ctask->sc; if (!sc) return; + + conn->session->tt->cleanup_cmd_task(conn, ctask); + iscsi_ctask_mtask_cleanup(ctask); + sc->result = err; sc->resid = sc->request_bufflen; iscsi_complete_command(conn->session, ctask); @@ -1062,8 +1073,11 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; /* ctask completed before time out */ - if (!ctask->sc) - goto success; + if (!ctask->sc) { + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } /* what should we do here ? */ if (conn->ctask == ctask) { @@ -1073,7 +1087,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) } if (ctask->state == ISCSI_TASK_PENDING) - goto success; + goto success_cleanup; conn->tmabort_state = TMABORT_INITIAL; @@ -1081,25 +1095,31 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) rc = iscsi_exec_abort_task(sc, ctask); spin_lock_bh(&session->lock); - iscsi_ctask_mtask_cleanup(ctask); if (rc || sc->SCp.phase != session->age || session->state != ISCSI_STATE_LOGGED_IN) goto failed; + iscsi_ctask_mtask_cleanup(ctask); - /* ctask completed before tmf abort response */ - if (!ctask->sc) { - debug_scsi("sc completed while abort in progress\n"); - goto success; - } - - if (conn->tmabort_state != TMABORT_SUCCESS) { + switch (conn->tmabort_state) { + case TMABORT_SUCCESS: + goto success_cleanup; + case TMABORT_NOT_FOUND: + if (!ctask->sc) { + /* ctask completed before tmf abort response */ + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } + /* fall through */ + default: + /* timedout or failed */ spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); spin_lock_bh(&session->lock); goto failed; } -success: +success_cleanup: debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); spin_unlock_bh(&session->lock); @@ -1113,6 +1133,7 @@ success: spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); +success_rel_mutex: mutex_unlock(&conn->xmitmutex); return SUCCESS; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index e71d6e9..3f69f7e 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -60,6 +60,7 @@ struct iscsi_nopin; #define TMABORT_SUCCESS 0x1 #define TMABORT_FAILED 0x2 #define TMABORT_TIMEDOUT 0x3 +#define TMABORT_NOT_FOUND 0x4 /* Connection suspend "bit" */ #define ISCSI_SUSPEND_BIT 1 -- cgit v1.1 From 1c83469d36a9dd30dbf1fb9fc5ca3be3a0e64ff4 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:26 -0500 Subject: [SCSI] iscsi bugfixes: fix oops when iser is flushing io When we enter recovery and flush the running commands we cannot freee the connection before flushing the commands. Some commands may have a reference to the connection that needs to be released before. iscsi_stop was forcing the term and suspend too early and was causing a oops in iser, so this patch removes those callbacks all together and allows the LLD to handle that detail. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 22 +---------- drivers/scsi/iscsi_tcp.c | 67 ++++++++++++++------------------ drivers/scsi/libiscsi.c | 12 ++---- include/scsi/scsi_transport_iscsi.h | 4 -- 4 files changed, 34 insertions(+), 71 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 34b0da5..1437d7e 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -378,21 +378,6 @@ iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn) return iser_conn_set_full_featured_mode(conn); } -static void -iscsi_iser_conn_terminate(struct iscsi_conn *conn) -{ - struct iscsi_iser_conn *iser_conn = conn->dd_data; - struct iser_conn *ib_conn = iser_conn->ib_conn; - - BUG_ON(!ib_conn); - /* starts conn teardown process, waits until all previously * - * posted buffers get flushed, deallocates all conn resources */ - iser_conn_terminate(ib_conn); - iser_conn->ib_conn = NULL; - conn->recv_lock = NULL; -} - - static struct iscsi_transport iscsi_iser_transport; static struct iscsi_cls_session * @@ -555,13 +540,13 @@ iscsi_iser_ep_poll(__u64 ep_handle, int timeout_ms) static void iscsi_iser_ep_disconnect(__u64 ep_handle) { - struct iser_conn *ib_conn = iscsi_iser_ib_conn_lookup(ep_handle); + struct iser_conn *ib_conn; + ib_conn = iscsi_iser_ib_conn_lookup(ep_handle); if (!ib_conn) return; iser_err("ib conn %p state %d\n",ib_conn, ib_conn->state); - iser_conn_terminate(ib_conn); } @@ -614,9 +599,6 @@ static struct iscsi_transport iscsi_iser_transport = { .get_session_param = iscsi_session_get_param, .start_conn = iscsi_iser_conn_start, .stop_conn = iscsi_conn_stop, - /* these are called as part of conn recovery */ - .suspend_conn_recv = NULL, /* FIXME is/how this relvant to iser? */ - .terminate_conn = iscsi_iser_conn_terminate, /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_iser_conn_get_stats, diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 7d78459..b6c68be 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1040,9 +1040,8 @@ iscsi_conn_set_callbacks(struct iscsi_conn *conn) } static void -iscsi_conn_restore_callbacks(struct iscsi_conn *conn) +iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn) { - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct sock *sk = tcp_conn->sock->sk; /* restore socket callbacks, see also: iscsi_conn_set_callbacks() */ @@ -1933,6 +1932,23 @@ tcp_conn_alloc_fail: } static void +iscsi_tcp_release_conn(struct iscsi_conn *conn) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + + if (!tcp_conn->sock) + return; + + sock_hold(tcp_conn->sock->sk); + iscsi_conn_restore_callbacks(tcp_conn); + sock_put(tcp_conn->sock->sk); + + sock_release(tcp_conn->sock); + tcp_conn->sock = NULL; + conn->recv_lock = NULL; +} + +static void iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) { struct iscsi_conn *conn = cls_conn->dd_data; @@ -1942,6 +1958,7 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) if (conn->hdrdgst_en || conn->datadgst_en) digest = 1; + iscsi_tcp_release_conn(conn); iscsi_conn_teardown(cls_conn); /* now free tcp_conn */ @@ -1965,6 +1982,15 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) kfree(tcp_conn); } +static void +iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + + iscsi_conn_stop(cls_conn, flag); + iscsi_tcp_release_conn(conn); +} + static int iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, struct iscsi_cls_conn *cls_conn, uint64_t transport_eph, @@ -2013,38 +2039,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, return 0; } -static void -iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct sock *sk; - - if (!tcp_conn->sock) - return; - - sk = tcp_conn->sock->sk; - write_lock_bh(&sk->sk_callback_lock); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - write_unlock_bh(&sk->sk_callback_lock); -} - -static void -iscsi_tcp_terminate_conn(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - - if (!tcp_conn->sock) - return; - - sock_hold(tcp_conn->sock->sk); - iscsi_conn_restore_callbacks(conn); - sock_put(tcp_conn->sock->sk); - - sock_release(tcp_conn->sock); - tcp_conn->sock = NULL; - conn->recv_lock = NULL; -} - /* called with host lock */ static void iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, @@ -2413,10 +2407,7 @@ static struct iscsi_transport iscsi_tcp_transport = { .get_conn_param = iscsi_tcp_conn_get_param, .get_session_param = iscsi_session_get_param, .start_conn = iscsi_conn_start, - .stop_conn = iscsi_conn_stop, - /* these are called as part of conn recovery */ - .suspend_conn_recv = iscsi_tcp_suspend_conn_rx, - .terminate_conn = iscsi_tcp_terminate_conn, + .stop_conn = iscsi_tcp_conn_stop, /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_conn_get_stats, diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 4e2ca8f..36f520b 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1440,12 +1440,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); mutex_lock(&conn->xmitmutex); - if (conn->c_stage == ISCSI_CONN_INITIAL_STAGE) { - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); - - session->tt->terminate_conn(conn); - } spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_CLEANUP_WAIT; @@ -1622,8 +1616,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); spin_unlock_bh(&session->lock); - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); + write_lock_bh(conn->recv_lock); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); + write_unlock_bh(conn->recv_lock); mutex_lock(&conn->xmitmutex); /* @@ -1642,7 +1637,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, } } - session->tt->terminate_conn(conn); /* * flush queues. */ diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 5a3df1d..39e8332 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -57,8 +57,6 @@ struct sockaddr; * @stop_conn: suspend/recover/terminate connection * @send_pdu: send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text. * @session_recovery_timedout: notify LLD a block during recovery timed out - * @suspend_conn_recv: susepend the recv side of the connection - * @termincate_conn: destroy socket connection. Called with mutex lock. * @init_cmd_task: Initialize a iscsi_cmd_task and any internal structs. * Called from queuecommand with session lock held. * @init_mgmt_task: Initialize a iscsi_mgmt_task and any internal structs. @@ -112,8 +110,6 @@ struct iscsi_transport { char *data, uint32_t data_size); void (*get_stats) (struct iscsi_cls_conn *conn, struct iscsi_stats *stats); - void (*suspend_conn_recv) (struct iscsi_conn *conn); - void (*terminate_conn) (struct iscsi_conn *conn); void (*init_cmd_task) (struct iscsi_cmd_task *ctask); void (*init_mgmt_task) (struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, -- cgit v1.1 From 63f75cc8a7e6ce453e38a7b90cdcae83d63f1ea7 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:29 -0500 Subject: [SCSI] iscsi bugfixes: fix oops when removing session We are touching the cls_session after we have freed it. This causes a oops. Signed-off-by: Or Gerlitz Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 36f520b..c989bc6 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1337,6 +1337,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) { struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); struct iscsi_session *session = iscsi_hostdata(shost->hostdata); + struct module *owner = cls_session->transport->owner; scsi_remove_host(shost); @@ -1345,7 +1346,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) iscsi_destroy_session(cls_session); scsi_host_put(shost); - module_put(cls_session->transport->owner); + module_put(owner); } EXPORT_SYMBOL_GPL(iscsi_session_teardown); -- cgit v1.1 From 9aaa2b4621280b6de1ecfb6dd7cd5cbe59fd1264 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:34 -0500 Subject: [SCSI] iscsi bugfixes: dont use GFP_KERNEL for sending errors iscsi_tcp can send error events from soft irq context so we cannot use GFP_KERNEL. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 7b9e8fa..30a47c1 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -634,13 +634,13 @@ mempool_zone_get_skb(struct mempool_zone *zone) } static int -iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb) +iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb, gfp_t gfp) { unsigned long flags; int rc; skb_get(skb); - rc = netlink_broadcast(nls, skb, 0, 1, GFP_KERNEL); + rc = netlink_broadcast(nls, skb, 0, 1, gfp); if (rc < 0) { mempool_free(skb, zone->pool); printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc); @@ -749,7 +749,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) ev->r.connerror.cid = conn->cid; ev->r.connerror.sid = iscsi_conn_get_sid(conn); - iscsi_broadcast_skb(conn->z_error, skb); + iscsi_broadcast_skb(conn->z_error, skb, GFP_ATOMIC); dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n", error); @@ -895,7 +895,7 @@ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) * this will occur if the daemon is not up, so we just warn * the user and when the daemon is restarted it will handle it */ - rc = iscsi_broadcast_skb(conn->z_pdu, skb); + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); if (rc < 0) dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " "session destruction event. Check iscsi daemon\n"); @@ -958,7 +958,7 @@ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) * this will occur if the daemon is not up, so we just warn * the user and when the daemon is restarted it will handle it */ - rc = iscsi_broadcast_skb(conn->z_pdu, skb); + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); if (rc < 0) dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " "session creation event. Check iscsi daemon\n"); -- cgit v1.1 From c8dc1e523b0f1e6dd71cdabd8c7d7587c6dc27f9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:39 -0500 Subject: [SCSI] iscsi bugfixes: reduce memory allocations We currently try to allocate a max_recv_data_segment_length which can be very large (default is 64K), and common uses are up to 1MB. It is very very difficult to allocte this much contiguous memory and it turns out we never even use it. We really only need a couple of pages, so this patch has us allocates just what we know what we need today. Later if vendors start adding vendor specific data and we need to handle large buffers we can do this, but for the last 4 years we have not seen anyone do this or request it. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 83 ++++++++++++++---------------------------------- drivers/scsi/iscsi_tcp.h | 2 -- drivers/scsi/libiscsi.c | 10 ++++-- include/scsi/libiscsi.h | 8 +++++ 4 files changed, 38 insertions(+), 65 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b6c68be..aa20adc 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -511,13 +511,28 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) break; case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: - case ISCSI_OP_LOGOUT_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_REJECT: case ISCSI_OP_ASYNC_EVENT: + /* + * It is possible that we could get a PDU with a buffer larger + * than 8K, but there are no targets that currently do this. + * For now we fail until we find a vendor that needs it + */ + if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH < + tcp_conn->in.datalen) { + printk(KERN_ERR "iscsi_tcp: received buffer of len %u " + "but conn buffer is only %u (opcode %0x)\n", + tcp_conn->in.datalen, + DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode); + rc = ISCSI_ERR_PROTO; + break; + } + if (tcp_conn->in.datalen) goto copy_hdr; /* fall through */ + case ISCSI_OP_LOGOUT_RSP: + case ISCSI_OP_NOOP_IN: case ISCSI_OP_SCSI_TMFUNC_RSP: rc = iscsi_complete_pdu(conn, hdr, NULL, 0); break; @@ -625,9 +640,9 @@ iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask, * byte counters. **/ static inline int -iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) +iscsi_tcp_copy(struct iscsi_conn *conn) { - void *buf = tcp_conn->data; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; int buf_size = tcp_conn->in.datalen; int buf_left = buf_size - tcp_conn->data_copied; int size = min(tcp_conn->in.copy, buf_left); @@ -638,7 +653,7 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) BUG_ON(size <= 0); rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - (char*)buf + tcp_conn->data_copied, size); + (char*)conn->data + tcp_conn->data_copied, size); BUG_ON(rc); tcp_conn->in.offset += size; @@ -785,22 +800,21 @@ iscsi_data_recv(struct iscsi_conn *conn) spin_unlock(&conn->session->lock); case ISCSI_OP_TEXT_RSP: case ISCSI_OP_LOGIN_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_ASYNC_EVENT: case ISCSI_OP_REJECT: /* * Collect data segment to the connection's data * placeholder */ - if (iscsi_tcp_copy(tcp_conn)) { + if (iscsi_tcp_copy(conn)) { rc = -EAGAIN; goto exit; } - rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, tcp_conn->data, + rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data, tcp_conn->in.datalen); if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP) - iscsi_recv_digest_update(tcp_conn, tcp_conn->data, + iscsi_recv_digest_update(tcp_conn, conn->data, tcp_conn->in.datalen); break; default: @@ -1911,21 +1925,9 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx) tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; /* initial operational parameters */ tcp_conn->hdr_size = sizeof(struct iscsi_hdr); - tcp_conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH; - - /* allocate initial PDU receive place holder */ - if (tcp_conn->data_size <= PAGE_SIZE) - tcp_conn->data = kmalloc(tcp_conn->data_size, GFP_KERNEL); - else - tcp_conn->data = (void*)__get_free_pages(GFP_KERNEL, - get_order(tcp_conn->data_size)); - if (!tcp_conn->data) - goto max_recv_dlenght_alloc_fail; return cls_conn; -max_recv_dlenght_alloc_fail: - kfree(tcp_conn); tcp_conn_alloc_fail: iscsi_conn_teardown(cls_conn); return NULL; @@ -1973,12 +1975,6 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) crypto_free_tfm(tcp_conn->data_rx_tfm); } - /* free conn->data, size = MaxRecvDataSegmentLength */ - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(tcp_conn->data); - else - free_pages((unsigned long)tcp_conn->data, - get_order(tcp_conn->data_size)); kfree(tcp_conn); } @@ -2131,39 +2127,6 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, int value; switch(param) { - case ISCSI_PARAM_MAX_RECV_DLENGTH: { - char *saveptr = tcp_conn->data; - gfp_t flags = GFP_KERNEL; - - sscanf(buf, "%d", &value); - if (tcp_conn->data_size >= value) { - iscsi_set_param(cls_conn, param, buf, buflen); - break; - } - - spin_lock_bh(&session->lock); - if (conn->stop_stage == STOP_CONN_RECOVER) - flags = GFP_ATOMIC; - spin_unlock_bh(&session->lock); - - if (value <= PAGE_SIZE) - tcp_conn->data = kmalloc(value, flags); - else - tcp_conn->data = (void*)__get_free_pages(flags, - get_order(value)); - if (tcp_conn->data == NULL) { - tcp_conn->data = saveptr; - return -ENOMEM; - } - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(saveptr); - else - free_pages((unsigned long)saveptr, - get_order(tcp_conn->data_size)); - iscsi_set_param(cls_conn, param, buf, buflen); - tcp_conn->data_size = value; - break; - } case ISCSI_PARAM_HDRDGST_EN: iscsi_set_param(cls_conn, param, buf, buflen); tcp_conn->hdr_size = sizeof(struct iscsi_hdr); diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 8083028..6a4ee70 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -78,8 +78,6 @@ struct iscsi_tcp_conn { char hdrext[4*sizeof(__u16) + sizeof(__u32)]; int data_copied; - char *data; /* data placeholder */ - int data_size; /* actual recv_dlength */ int stop_stage; /* conn_stop() flag: * * stop to recover, * * stop to terminate */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c989bc6..03b3dee 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -360,6 +360,10 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, switch(opcode) { case ISCSI_OP_LOGOUT_RSP: + if (datalen) { + rc = ISCSI_ERR_PROTO; + break; + } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; /* fall through */ case ISCSI_OP_LOGIN_RSP: @@ -383,7 +387,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, iscsi_tmf_rsp(conn, hdr); break; case ISCSI_OP_NOOP_IN: - if (hdr->ttt != ISCSI_RESERVED_TAG) { + if (hdr->ttt != ISCSI_RESERVED_TAG || datalen) { rc = ISCSI_ERR_PROTO; break; } @@ -1405,7 +1409,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL); if (!data) goto login_mtask_data_alloc_fail; - conn->login_mtask->data = data; + conn->login_mtask->data = conn->data = data; init_timer(&conn->tmabort_timer); mutex_init(&conn->xmitmutex); @@ -1477,7 +1481,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) } spin_lock_bh(&session->lock); - kfree(conn->login_mtask->data); + kfree(conn->data); __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); list_del(&conn->item); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 3f69f7e..41904f6 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -135,6 +135,14 @@ struct iscsi_conn { int id; /* CID */ struct list_head item; /* maintains list of conns */ int c_stage; /* connection state */ + /* + * Preallocated buffer for pdus that have data but do not + * originate from scsi-ml. We never have two pdus using the + * buffer at the same time. It is only allocated to + * the default max recv size because the pdus we support + * should always fit in this buffer + */ + char *data; struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */ struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */ struct iscsi_cmd_task *ctask; /* xmit ctask in progress */ -- cgit v1.1 From 40527afea1a3b18ee5754e17d6f807176e03f1f2 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:45 -0500 Subject: [SCSI] iscsi bugfixes: pass errors from complete_pdu to caller Must pass ISCSI_ERR values from the recv path and propogate them upwards. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 2 +- drivers/scsi/libiscsi.c | 27 ++++++++++++++++++--------- 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index aa20adc..33534f6 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -885,7 +885,7 @@ more: } tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; } else if (rc) { - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_failure(conn, rc); return 0; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 03b3dee..c628c63 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -372,7 +372,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, * login related PDU's exp_statsn is handled in * userspace */ - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -393,7 +394,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -406,14 +408,21 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } else if (itt == ISCSI_RESERVED_TAG) { switch(opcode) { case ISCSI_OP_NOOP_IN: - if (!datalen) { - rc = iscsi_check_assign_cmdsn(session, - (struct iscsi_nopin*)hdr); - if (!rc && hdr->ttt != ISCSI_RESERVED_TAG) - rc = iscsi_recv_pdu(conn->cls_conn, - hdr, NULL, 0); - } else + if (datalen) { rc = ISCSI_ERR_PROTO; + break; + } + + rc = iscsi_check_assign_cmdsn(session, + (struct iscsi_nopin*)hdr); + if (rc) + break; + + if (hdr->ttt == ISCSI_RESERVED_TAG) + break; + + if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0)) + rc = ISCSI_ERR_CONN_FAILED; break; case ISCSI_OP_REJECT: /* we need sth like iscsi_reject_rsp()*/ -- cgit v1.1 From f3ff0c3627df90aa28be98803b10289bb348e4e6 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:50 -0500 Subject: [SCSI] iscsi bugfixes: fix mem leaks in libiscsi We were leaking some strings. This patch just frees them. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index c628c63..5884cd2 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1357,6 +1357,8 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds); iscsi_pool_free(&session->cmdpool, (void**)session->cmds); + kfree(session->targetname); + iscsi_destroy_session(cls_session); scsi_host_put(shost); module_put(owner); @@ -1491,6 +1493,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) spin_lock_bh(&session->lock); kfree(conn->data); + kfree(conn->persistent_address); __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); list_del(&conn->item); -- cgit v1.1 From f4246b33c774bb4330eb6286beed6d3c9f4373c4 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 24 Jul 2006 15:47:54 -0500 Subject: [SCSI] iscsi bugfixes: update and move version number The version info is useful for iscsi tcp, iser and qla4xxx so move to transport class. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +----- drivers/scsi/scsi_transport_iscsi.c | 5 +++++ 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 33534f6..058f094 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -43,13 +43,10 @@ #include "iscsi_tcp.h" -#define ISCSI_TCP_VERSION "1.0-595" - MODULE_AUTHOR("Dmitry Yusupov , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -MODULE_VERSION(ISCSI_TCP_VERSION); /* #define DEBUG_TCP */ #define DEBUG_ASSERT @@ -2317,8 +2314,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session) } static struct scsi_host_template iscsi_sht = { - .name = "iSCSI Initiator over TCP/IP, v" - ISCSI_TCP_VERSION, + .name = "iSCSI Initiator over TCP/IP", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_XMIT_CMDS_MAX - 1, diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 30a47c1..2ecd141 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -34,6 +34,7 @@ #define ISCSI_SESSION_ATTRS 11 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 0 +#define ISCSI_TRANSPORT_VERSION "1.1-646" struct iscsi_internal { int daemon_pid; @@ -1613,6 +1614,9 @@ static __init int iscsi_transport_init(void) { int err; + printk(KERN_INFO "Loading iSCSI transport class v%s.", + ISCSI_TRANSPORT_VERSION); + err = class_register(&iscsi_transport_class); if (err) return err; @@ -1678,3 +1682,4 @@ MODULE_AUTHOR("Mike Christie , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI Transport Interface"); MODULE_LICENSE("GPL"); +MODULE_VERSION(ISCSI_TRANSPORT_VERSION); -- cgit v1.1 From fbf6080225a03aa2b3671acacebdf615f1d3f6ba Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:44:48 -0600 Subject: [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability checker This patch contains - a fix for 64-bit DMA capability check in megaraid_{mm,mbox} driver. - includes changes (going back to 32-bit DMA mask if 64-bit DMA mask failes) suggested by James with previous patch. - addition of SATA 150-4/6 as commented by Vasily Averin. With patch, the driver access PCIconfiguration space with dedicated offset to read a signature. If the signature read, it means that the controller has capability to handle 64-bit DMA. Without this patch, the driver used to blindly claim 64-bit DMA capability. The issue has been reported by Vasily Averin [vvs@sw.ru]. Thank you Vasily for the reporting. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 61 +++++++++++++++++++++++++++++++++++ drivers/scsi/megaraid/mega_common.h | 3 ++ drivers/scsi/megaraid/megaraid_mbox.c | 34 +++++++++++++++---- drivers/scsi/megaraid/megaraid_mbox.h | 4 +-- 4 files changed, 94 insertions(+), 8 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index c173806..fd8939e 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -1,3 +1,64 @@ +Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju +Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module) +Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) + +1. Fixed a bug in megaraid_init_mbox(). + Customer reported "garbage in file on x86_64 platform". + Root Cause: the driver registered controllers as 64-bit DMA capable + for those which are not support it. + Fix: Made change in the function inserting identification machanism + identifying 64-bit DMA capable controllers. + + > -----Original Message----- + > From: Vasily Averin [mailto:vvs@sw.ru] + > Sent: Thursday, May 04, 2006 2:49 PM + > To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul; + > Ju, Seokmann; Bagalkote, Sreenivas; + > James.Bottomley@SteelEye.com; devel@openvz.org + > Subject: megaraid_mbox: garbage in file + > + > Hello all, + > + > I've investigated customers claim on the unstable work of + > their node and found a + > strange effect: reading from some files leads to the + > "attempt to access beyond end of device" messages. + > + > I've checked filesystem, memory on the node, motherboard BIOS + > version, but it + > does not help and issue still has been reproduced by simple + > file reading. + > + > Reproducer is simple: + > + > echo 0xffffffff >/proc/sys/dev/scsi/logging_level ; + > cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ; + > echo 0 >/proc/sys/dev/scsi/logging + > + > It leads to the following messages in dmesg + > + > sd_init_command: disk=sda, block=871769260, count=26 + > sda : block=871769260 + > sda : reading 26/26 512 byte blocks. + > scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420) + > sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40, + > queuecommand 0xc0344010 + > leaving scsi_dispatch_cmnd() + > scsi_delete_timer: scmd: f79ed980, rtn: 1 + > sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > scsi host busy 1 failed 0 + > sd 0:1:0:0: Notifying upper driver of completion (result 0) + > sd_rw_intr: sda: res=0x0 + > 26 sectors total, 13312 bytes done. + > use_sg is 4 + > attempt to access beyond end of device + > sda6: rw=0, want=1044134458, limit=951401367 + > Buffer I/O error on device sda6, logical block 522067228 + > attempt to access beyond end of device + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 4675343..12e3812 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -37,6 +37,9 @@ #define LSI_MAX_CHANNELS 16 #define LSI_MAX_LOGICAL_DRIVES_64LD (64+1) +#define HBA_SIGNATURE_64_BIT 0x299 +#define PCI_CONF_AMISIG64 0xa4 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 9271513..e671af0 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.8 (Apr 11 2006) + * Version : v2.20.4.9 (Jul 16 2006) * * Authors: * Atul Mukker @@ -720,6 +720,7 @@ megaraid_init_mbox(adapter_t *adapter) struct pci_dev *pdev; mraid_device_t *raid_dev; int i; + uint32_t magic64; adapter->ito = MBOX_TIMEOUT; @@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter) // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range - if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) { - - con_log(CL_ANN, (KERN_WARNING - "megaraid: could not set DMA mask for 64-bit.\n")); + pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); + + if (((magic64 == HBA_SIGNATURE_64_BIT) && + ((adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_6) || + (adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_VERDE) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { + if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: DMA mask for 64-bit failed\n")); - goto out_free_sysfs_res; + if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: 32-bit DMA mask failed\n")); + goto out_free_sysfs_res; + } + } } // setup tasklet for DPC diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 868fb0e..2b5a328 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.8" -#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)" +#define MEGARAID_VERSION "2.20.4.9" +#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)" /* -- cgit v1.1 From aa677bc7445147f663ebde69d248a30839bada76 Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:44:58 -0600 Subject: [SCSI] megaraid_{mm,mbox}: a fix on INQUIRY with EVPD With this patch, driver will protect data corruption created by INQUIRY with EVPD request to megaraid controllers. As specified in the changelog, megaraid F/W already has fixed the issue and being under process of release. Meanwhile, driver will protect the system with this patch. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 7 +++++++ drivers/scsi/megaraid/mega_common.h | 3 +++ drivers/scsi/megaraid/megaraid_mbox.c | 8 ++++++++ 3 files changed, 18 insertions(+) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index fd8939e..0edb048 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -59,6 +59,13 @@ Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) > Buffer I/O error on device sda6, logical block 522067228 > attempt to access beyond end of device +2. When INQUIRY with EVPD bit set issued to the MegaRAID controller, + system memory gets corrupted. + Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set + incorrectly. + Fix: MegaRAID F/W has fixed the problem and being process of release, + soon. Meanwhile, driver will filter out the request. + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 12e3812..8cd0bd1 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -40,6 +40,9 @@ #define HBA_SIGNATURE_64_BIT 0x299 #define PCI_CONF_AMISIG64 0xa4 +#define MEGA_SCSI_INQ_EVPD 1 +#define MEGA_INVALID_FIELD_IN_CDB 0x24 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e671af0..cd982c8 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -1644,6 +1644,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) rdev->last_disp |= (1L << SCP2CHANNEL(scp)); } + if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) { + scp->sense_buffer[0] = 0x70; + scp->sense_buffer[2] = ILLEGAL_REQUEST; + scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB; + scp->result = CHECK_CONDITION << 1; + return NULL; + } + /* Fall through */ case READ_CAPACITY: -- cgit v1.1 From 0b4972d59170e13ab0236e8a7148112052590c01 Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Tue, 25 Jul 2006 08:45:06 -0600 Subject: [SCSI] megaraid_{mm,mbox}: a fix on "kernel unaligned access address" issue There was an issue in the data structure defined by megaraid driver casuing "kernel unaligned access.." messages to be displayed during IOCTL on IA64 platform. The issue has been reported/fixed by Sakurai Hiroomi [sakurai_hiro@soft.fujitsu.com]. Signed-Off By: Seokmann Ju Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 55 ++++++++++++++++++++++++++++++++++ drivers/scsi/megaraid/megaraid_ioctl.h | 4 +++ drivers/scsi/megaraid/megaraid_mm.c | 2 +- drivers/scsi/megaraid/megaraid_mm.h | 4 +-- 4 files changed, 62 insertions(+), 3 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 0edb048..a056bbe 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -66,6 +66,61 @@ Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Fix: MegaRAID F/W has fixed the problem and being process of release, soon. Meanwhile, driver will filter out the request. +3. One of member in the data structure of the driver leads unaligne + issue on 64-bit platform. + Customer reporeted "kernel unaligned access addrss" issue when + application communicates with MegaRAID HBA driver. + Root Cause: in uioc_t structure, one of member had misaligned and it + led system to display the error message. + Fix: A patch submitted to community from following folk. + + > -----Original Message----- + > From: linux-scsi-owner@vger.kernel.org + > [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi + > Sent: Wednesday, July 12, 2006 4:20 AM + > To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org + > Subject: Re: Help: strange messages from kernel on IA64 platform + > + > Hi, + > + > I saw same message. + > + > When GAM(Global Array Manager) is started, The following + > message output. + > kernel: kernel unaligned access to 0xe0000001fe1080d4, + > ip=0xa000000200053371 + > + > The uioc structure used by ioctl is defined by packed, + > the allignment of each member are disturbed. + > In a 64 bit structure, the allignment of member doesn't fit 64 bit + > boundary. this causes this messages. + > In a 32 bit structure, we don't see the message because the allinment + > of member fit 32 bit boundary even if packed is specified. + > + > patch + > I Add 32 bit dummy member to fit 64 bit boundary. I tested. + > We confirmed this patch fix the problem by IA64 server. + > + > ************************************************************** + > **************** + > --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig + > 2006-04-03 17:13:03.000000000 +0900 + > +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h + > 2006-04-03 17:14:09.000000000 +0900 + > @@ -132,6 +132,10 @@ + > /* Driver Data: */ + > void __user * user_data; + > uint32_t user_data_len; + > + + > + /* 64bit alignment */ + > + uint32_t pad_0xBC; + > + + > mraid_passthru_t __user *user_pthru; + > + > mraid_passthru_t *pthru32; + > ************************************************************** + > **************** + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h index bdaee14..b8aa342 100644 --- a/drivers/scsi/megaraid/megaraid_ioctl.h +++ b/drivers/scsi/megaraid/megaraid_ioctl.h @@ -132,6 +132,10 @@ typedef struct uioc { /* Driver Data: */ void __user * user_data; uint32_t user_data_len; + + /* 64bit alignment */ + uint32_t pad_for_64bit_align; + mraid_passthru_t __user *user_pthru; mraid_passthru_t *pthru32; diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index e8f534f..d85b9a8 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mm.c - * Version : v2.20.2.6 (Mar 7 2005) + * Version : v2.20.2.7 (Jul 16 2006) * * Common management module */ diff --git a/drivers/scsi/megaraid/megaraid_mm.h b/drivers/scsi/megaraid/megaraid_mm.h index 3d9e67d..c8762b2 100644 --- a/drivers/scsi/megaraid/megaraid_mm.h +++ b/drivers/scsi/megaraid/megaraid_mm.h @@ -27,9 +27,9 @@ #include "megaraid_ioctl.h" -#define LSI_COMMON_MOD_VERSION "2.20.2.6" +#define LSI_COMMON_MOD_VERSION "2.20.2.7" #define LSI_COMMON_MOD_EXT_VERSION \ - "(Release Date: Mon Mar 7 00:01:03 EST 2005)" + "(Release Date: Sun Jul 16 00:01:03 EST 2006)" #define LSI_DBGLVL dbglevel -- cgit v1.1 From 0dfda7751e969902f7231fc547ca8c9e0fb9ee13 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 28 Jul 2006 09:01:36 +0200 Subject: [SCSI] fix simscsi On Thu, Jul 27, 2006 at 01:03:24AM -0700, Andrew Morton wrote: > arch/ia64/hp/sim/simscsi.c: In function `simscsi_sg_readwrite': > arch/ia64/hp/sim/simscsi.c:154: error: structure has no member named `buffer' > arch/ia64/hp/sim/simscsi.c: In function `simscsi_fillresult': > arch/ia64/hp/sim/simscsi.c:247: error: structure has no member named `buffer' > arch/ia64/hp/sim/simscsi.c: At top level: > arch/ia64/hp/sim/simscsi.c:87: warning: 'simscsi_setup' defined but not used Signed-off-by: James Bottomley --- arch/ia64/hp/sim/simscsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index a3fe975..8f0a16a 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -151,7 +151,7 @@ static void simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) { int list_len = sc->use_sg; - struct scatterlist *sl = (struct scatterlist *)sc->buffer; + struct scatterlist *sl = (struct scatterlist *)sc->request_buffer; struct disk_stat stat; struct disk_req req; @@ -244,7 +244,8 @@ static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len) if (scatterlen == 0) memcpy(sc->request_buffer, buf, len); - else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) { + else for (slp = (struct scatterlist *)sc->request_buffer; + scatterlen-- > 0 && len > 0; slp++) { unsigned thislen = min(len, slp->length); memcpy(page_address(slp->page) + slp->offset, buf, thislen); -- cgit v1.1 From 64ba88182962698a8cb75792372c1dddaef82989 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 2 Aug 2006 15:24:34 -0400 Subject: [SCSI] lpfc 8.1.7 : Add statistics reset callback for FC transport Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 90 +++++++++++++++++++++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 3 ++ drivers/scsi/lpfc/lpfc_sli.h | 14 +++++++ 3 files changed, 103 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5c68cdd..762d623 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1210,8 +1210,10 @@ lpfc_get_stats(struct Scsi_Host *shost) struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; struct lpfc_sli *psli = &phba->sli; struct fc_host_statistics *hs = &phba->link_stats; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; + unsigned long seconds; int rc = 0; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); @@ -1272,22 +1274,103 @@ lpfc_get_stats(struct Scsi_Host *shost) hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt; hs->error_frames = pmb->un.varRdLnk.crcCnt; + hs->link_failure_count -= lso->link_failure_count; + hs->loss_of_sync_count -= lso->loss_of_sync_count; + hs->loss_of_signal_count -= lso->loss_of_signal_count; + hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count; + hs->invalid_tx_word_count -= lso->invalid_tx_word_count; + hs->invalid_crc_count -= lso->invalid_crc_count; + hs->error_frames -= lso->error_frames; + if (phba->fc_topology == TOPOLOGY_LOOP) { hs->lip_count = (phba->fc_eventTag >> 1); + hs->lip_count -= lso->link_events; hs->nos_count = -1; } else { hs->lip_count = -1; hs->nos_count = (phba->fc_eventTag >> 1); + hs->nos_count -= lso->link_events; } hs->dumped_frames = -1; -/* FIX ME */ - /*hs->SecondsSinceLastReset = (jiffies - lpfc_loadtime) / HZ;*/ + seconds = get_seconds(); + if (seconds < psli->stats_start) + hs->seconds_since_last_reset = seconds + + ((unsigned long)-1 - psli->stats_start); + else + hs->seconds_since_last_reset = seconds - psli->stats_start; return hs; } +static void +lpfc_reset_stats(struct Scsi_Host *shost) +{ + struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; + LPFC_MBOXQ_t *pmboxq; + MAILBOX_t *pmb; + int rc = 0; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) + return; + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + + pmb = &pmboxq->mb; + pmb->mbxCommand = MBX_READ_STATUS; + pmb->mbxOwner = OWN_HOST; + pmb->un.varWords[0] = 0x1; /* reset request */ + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free(pmboxq, phba->mbox_mem_pool); + return; + } + + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pmb->mbxCommand = MBX_READ_LNK_STAT; + pmb->mbxOwner = OWN_HOST; + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free( pmboxq, phba->mbox_mem_pool); + return; + } + + lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; + lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; + lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; + lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; + lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; + lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; + lso->error_frames = pmb->un.varRdLnk.crcCnt; + lso->link_events = (phba->fc_eventTag >> 1); + + psli->stats_start = get_seconds(); + + return; +} /* * The LPFC driver treats linkdown handling as target loss events so there @@ -1431,8 +1514,7 @@ struct fc_function_template lpfc_transport_functions = { */ .get_fc_host_stats = lpfc_get_stats, - - /* the LPFC driver doesn't support resetting stats yet */ + .reset_fc_host_stats = lpfc_reset_stats, .dd_fcrport_size = sizeof(struct lpfc_rport_data), .show_rport_maxframe_size = 1, diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 350a625..f453fcc 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1792,6 +1792,9 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) spin_unlock_irq(phba->host->host_lock); + memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets)); + psli->stats_start = get_seconds(); + if (skip_post) mdelay(100); else diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index d8ef0d2..478e799 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -172,6 +172,18 @@ struct lpfc_sli_stat { uint32_t mbox_busy; /* Mailbox cmd busy */ }; +/* Structure to store link status values when port stats are reset */ +struct lpfc_lnk_stat { + uint32_t link_failure_count; + uint32_t loss_of_sync_count; + uint32_t loss_of_signal_count; + uint32_t prim_seq_protocol_err_count; + uint32_t invalid_tx_word_count; + uint32_t invalid_crc_count; + uint32_t error_frames; + uint32_t link_events; +}; + /* Structure used to hold SLI information */ struct lpfc_sli { uint32_t num_rings; @@ -201,6 +213,8 @@ struct lpfc_sli { struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */ size_t iocbq_lookup_len; /* current lengs of the array */ uint16_t last_iotag; /* last allocated IOTAG */ + unsigned long stats_start; /* in seconds */ + struct lpfc_lnk_stat lnk_stat_offsets; }; /* Given a pointer to the start of the ring, and the slot number of -- cgit v1.1 From a309a6b6e64b8147b7cfe7388237fb83834f58c9 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:33:43 -0400 Subject: [SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox delays needing to be longer Fix failing firmware download due to mailbox delays needing to be longer. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 3 ++- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_mbox.c | 16 ++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 11 +++++++---- drivers/scsi/lpfc/lpfc_sli.h | 6 ++++++ 5 files changed, 32 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 762d623..4ccce14 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1000,7 +1000,8 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) spin_unlock_irq(phba->host->host_lock); rc = lpfc_sli_issue_mbox_wait (phba, phba->sysfs_mbox.mbox, - phba->fc_ratov * 2); + lpfc_mbox_tmo_val(phba, + phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ); spin_lock_irq(phba->host->host_lock); } diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 517e9e4..2a17646 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -127,6 +127,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *); LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *); +int lpfc_mbox_tmo_val(struct lpfc_hba *, int); int lpfc_mem_alloc(struct lpfc_hba *); void lpfc_mem_free(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e42f22a..4d016c2 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba) return mbq; } + +int +lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) +{ + switch (cmd) { + case MBX_WRITE_NV: /* 0x03 */ + case MBX_UPDATE_CFG: /* 0x1B */ + case MBX_DOWN_LOAD: /* 0x1C */ + case MBX_DEL_LD_ENTRY: /* 0x1D */ + case MBX_LOAD_AREA: /* 0x81 */ + case MBX_FLASH_WR_ULA: /* 0x98 */ + case MBX_LOAD_EXP_ROM: /* 0x9C */ + return LPFC_MBOX_TMO_FLASH_CMD; + } + return LPFC_MBOX_TMO; +} diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index f453fcc..4dc2d58 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2197,7 +2197,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) return (MBX_NOT_FINISHED); } /* timeout active mbox command */ - mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO); + mod_timer(&psli->mbox_tmo, (jiffies + + (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand)))); } /* Mailbox cmd issue */ @@ -2257,7 +2258,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) break; case MBX_POLL: - i = 0; psli->mbox_active = NULL; if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ @@ -2271,11 +2271,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Read the HBA Host Attention Register */ ha_copy = readl(phba->HAregaddr); + i = lpfc_mbox_tmo_val(phba, mb->mbxCommand); + i *= 1000; /* Convert to ms */ + /* Wait for command to complete */ while (((word0 & OWN_CHIP) == OWN_CHIP) || (!(ha_copy & HA_MBATT) && (phba->hba_state > LPFC_WARM_START))) { - if (i++ >= 100) { + if (i-- <= 0) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(phba->host->host_lock, drvr_flag); @@ -2293,7 +2296,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Can be in interrupt context, do not sleep */ /* (or might be called with interrupts disabled) */ - mdelay(i); + mdelay(1); spin_lock_irqsave(phba->host->host_lock, drvr_flag); diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 478e799..e26de6809 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -225,3 +225,9 @@ struct lpfc_sli { #define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox command */ +#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write + * or erase cmds. This is especially + * long because of the potential of + * multiple flash erases that can be + * spawned. + */ -- cgit v1.1 From 1c067a42413c4f39c907443b8f5979cd4d82f0ff Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:33:52 -0400 Subject: [SCSI] lpfc 8.1.7 : Fix race condition between lpfc_sli_issue_mbox and lpfc_online Fix race condition between lpfc_sli_issue_mbox and lpfc_online Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_sli.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4dc2d58..fbf108c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1711,15 +1711,13 @@ lpfc_sli_brdreset(struct lpfc_hba * phba) phba->fc_myDID = 0; phba->fc_prevDID = 0; - psli->sli_flag = 0; - /* Turn off parity checking and serr during the physical reset */ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value); pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value & ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR))); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA); /* Now toggle INITFF bit in the Host Control Register */ writel(HC_INITFF, phba->HCregaddr); mdelay(1); @@ -1905,6 +1903,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) } while (resetcount < 2 && !done) { + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); phba->hba_state = LPFC_STATE_UNKNOWN; lpfc_sli_brdrestart(phba); msleep(2500); @@ -1912,6 +1913,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) if (rc) break; + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); resetcount++; /* Call pre CONFIG_PORT mailbox command initialization. A value of 0 -- cgit v1.1 From 8f6d98d2e05c38cb08fbda5e38e5f87d361c3cac Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:00 -0400 Subject: [SCSI] lpfc 8.1.7 : Short bug fixes Short bug fixes: - Fix iocbq list corruption due to missing list_del's in ct handling - Missing unlock in lpfc_sli_next_iotag() - Fix initialization of can_queue value - Differentiate sysfs mailbox errors with different codes. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 6 +++--- drivers/scsi/lpfc/lpfc_ct.c | 1 + drivers/scsi/lpfc/lpfc_init.c | 12 +++++++++++- drivers/scsi/lpfc/lpfc_sli.c | 5 +++-- 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 4ccce14..76f8bd5 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -884,7 +884,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count) phba->sysfs_mbox.mbox == NULL ) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } } @@ -1008,7 +1008,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) if (rc != MBX_SUCCESS) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -ENODEV; + return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; } phba->sysfs_mbox.state = SMBOX_READING; } @@ -1017,7 +1017,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) printk(KERN_WARNING "mbox_read: Bad State\n"); sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index b65ee57..cab2d9d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -131,6 +131,7 @@ lpfc_ct_unsol_event(struct lpfc_hba * phba, } ct_unsol_event_exit_piocbq: + list_del(&head); if (pmbuf) { list_for_each_entry_safe(matp, next_matp, &pmbuf->list, list) { lpfc_mbuf_free(phba, matp->virt, matp->phys); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ef47b82..16dc8c8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1616,7 +1616,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_iocbq; } - /* We can rely on a queue depth attribute only after SLI HBA setup */ + /* + * Set initial can_queue value since 0 is no longer supported and + * scsi_add_host will fail. This will be adjusted later based on the + * max xri value determined in hba setup. + */ host->can_queue = phba->cfg_hba_queue_depth - 10; /* Tell the midlayer we support 16 byte commands */ @@ -1656,6 +1660,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_irq; } + /* + * hba setup may have changed the hba_queue_depth so we need to adjust + * the value of can_queue. + */ + host->can_queue = phba->cfg_hba_queue_depth - 10; + lpfc_discovery_wait(phba); if (phba->cfg_poll & DISABLE_FCP_RING_INT) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fbf108c..9802ee8 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -320,7 +320,8 @@ lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq) kfree(old_arr); return iotag; } - } + } else + spin_unlock_irq(phba->host->host_lock); lpfc_printf_log(phba, KERN_ERR,LOG_SLI, "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n", @@ -1399,11 +1400,11 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, next_iocb, &saveq->list, list) { + list_del(&rspiocbp->list); lpfc_sli_release_iocbq(phba, rspiocbp); } } - lpfc_sli_release_iocbq(phba, saveq); } } -- cgit v1.1 From dca9479be891eac33e53ab37769e18c3259646da Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:08 -0400 Subject: [SCSI] lpfc 8.1.7 : ID String and Message fixes ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_ct.c | 12 ++++-------- drivers/scsi/lpfc/lpfc_els.c | 6 +++--- drivers/scsi/lpfc/lpfc_hbadisc.c | 12 ++++++------ drivers/scsi/lpfc/lpfc_nportdisc.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 28 ++++++++++++++++------------ 6 files changed, 31 insertions(+), 31 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index cab2d9d..bbb7310 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -482,7 +482,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, if (CTrsp->CommandResponse.bits.CmdRsp == be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) { lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0239 NameServer Rsp " + "%d:0208 NameServer Rsp " "Data: x%x\n", phba->brd_no, phba->fc_flag); @@ -589,13 +589,9 @@ lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp) lpfc_decode_firmware_rev(phba, fwrev, 0); - if (phba->Port[0]) { - sprintf(symbp, "Emulex %s Port %s FV%s DV%s", phba->ModelName, - phba->Port, fwrev, lpfc_release_version); - } else { - sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, - fwrev, lpfc_release_version); - } + sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, + fwrev, lpfc_release_version); + return; } /* diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index b89f6cb..60f5cca 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -2839,7 +2839,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) /* Xmit ELS RPS ACC response tag */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPS ACC response tag x%x " + "%d:0118 Xmit ELS RPS ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -2948,7 +2948,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_hba * phba, uint16_t cmdsize, /* Xmit ELS RPL ACC response tag */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPL ACC response tag x%x " + "%d:0120 Xmit ELS RPL ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -3109,7 +3109,7 @@ lpfc_els_rcv_fan(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_nodelist *ndlp, *next_ndlp; /* FAN received */ - lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:265 FAN received\n", + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:0265 FAN received\n", phba->brd_no); icmd = &cmdiocb->iocb; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 4d6cf99..1c3f268 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1782,7 +1782,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to REGLOGIN */ /* FIND node DID reglogin */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID reglogin" + "%d:0901 FIND node DID reglogin" " Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1805,7 +1805,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to PRLI */ /* FIND node DID prli */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID prli " + "%d:0902 FIND node DID prli " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1828,7 +1828,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to NPR */ /* FIND node DID npr */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID npr " + "%d:0903 FIND node DID npr " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1851,7 +1851,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to UNUSED */ /* FIND node DID unused */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID unused " + "%d:0905 FIND node DID unused " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -2335,7 +2335,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!initlinkmbox) { lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0206 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; @@ -2365,7 +2365,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) if (!clearlambox) { clrlaerr = 1; lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0207 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index bd0b0e2..b38021a 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -179,7 +179,7 @@ lpfc_els_abort(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, /* Abort outstanding I/O on NPort */ lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0201 Abort outstanding I/O on NPort x%x " + "%d:0205 Abort outstanding I/O on NPort x%x " "Data: x%x x%x x%x\n", phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a760a44..0811c82 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1104,7 +1104,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) ndlp->rport->dd_data); if (ret != SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "%d:0713 Bus Reset on target %d failed\n", + "%d:0700 Bus Reset on target %d failed\n", phba->brd_no, i); err_count++; } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 9802ee8..70f4d5a 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -970,9 +970,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba) * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed." - " Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0314 IOCB cmd 0x%x" + " processed. Skipping" + " completion", phba->brd_no, + irsp->ulpCommand); break; } @@ -1105,7 +1107,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, if (unlikely(irsp->ulpStatus)) { /* Rsp ring error: IOCB */ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, - "%d:0326 Rsp Ring %d error: IOCB Data: " + "%d:0336 Rsp Ring %d error: IOCB Data: " "x%x x%x x%x x%x x%x x%x x%x x%x\n", phba->brd_no, pring->ringno, irsp->un.ulpWord[0], irsp->un.ulpWord[1], @@ -1123,9 +1125,11 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed. " - "Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0333 IOCB cmd 0x%x" + " processed. Skipping" + " completion\n", phba->brd_no, + irsp->ulpCommand); break; } @@ -1156,7 +1160,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, } else { /* Unknown IOCB command */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0334 Unknown IOCB command " "Data: x%x, x%x x%x x%x x%x\n", phba->brd_no, type, irsp->ulpCommand, irsp->ulpStatus, irsp->ulpIoTag, @@ -1239,7 +1243,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0312 Ring %d handler: portRspPut %d " + "%d:0303 Ring %d handler: portRspPut %d " "is bigger then rsp ring %d\n", phba->brd_no, pring->ringno, portRspPut, portRspMax); @@ -1384,7 +1388,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0335 Unknown IOCB command " "Data: x%x x%x x%x x%x\n", phba->brd_no, irsp->ulpCommand, @@ -1759,7 +1763,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) /* Restart HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no, + "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no, phba->hba_state, psli->sli_flag); word0 = 0; @@ -3016,7 +3020,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, if (timeleft == 0) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0329 IOCB wait timeout error - no " + "%d:0338 IOCB wait timeout error - no " "wake response Data x%x\n", phba->brd_no, timeout); retval = IOCB_TIMEDOUT; -- cgit v1.1 From 416780d3a7836a99568c6728830ced592a7a22e3 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 1 Aug 2006 07:34:16 -0400 Subject: [SCSI] lpfc 8.1.7 : Change version number to 8.1.8 Change version number to 8.1.8 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 10e89c6..c7963f9 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.7" +#define LPFC_DRIVER_VERSION "8.1.8" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.1 From b797b6de9d4d8d085169a507c54b18e74dbe4f21 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Tue, 1 Aug 2006 13:48:13 -0700 Subject: [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ISP24xx. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_iocb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 2b60a27..c5b3c61 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -471,6 +471,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, mrk24->nport_handle = cpu_to_le16(loop_id); mrk24->lun[1] = LSB(lun); mrk24->lun[2] = MSB(lun); + host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun)); } else { SET_TARGET_ID(ha, mrk->target, loop_id); mrk->lun = cpu_to_le16(lun); -- cgit v1.1 From 45ebeb560570fd7ebae29a4105b81874063d5425 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 1 Aug 2006 13:48:14 -0700 Subject: [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_isr.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 139ea0e..0930260 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -487,6 +487,7 @@ typedef struct { #define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */ #define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */ /* used. */ +#define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */ #define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */ #define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */ #define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */ diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 795bf15..de06131 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -587,6 +587,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x " "%04x.\n", ha->host_no, mb[1], mb[2], mb[3])); break; + + case MBA_TRACE_NOTIFICATION: + DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n", + ha->host_no, mb[1], mb[2])); + break; } } -- cgit v1.1 From b0328beed0786b07d0102ed59cbf0b54ad8f726b Mon Sep 17 00:00:00 2001 From: Vladislav Bolkhovitin Date: Tue, 1 Aug 2006 13:48:15 -0700 Subject: [SCSI] qla2xxx: Fix to allow to reset devices using sg interface (sg_reset). Currently it is impossible to reset provided by Qlogic QLA2xxx driver SCSI devices externally using corresponding sg devices, particularly via sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset() function checks if the input scsi_cmnd has its private data (CMD_SP()) attached. Then the found pointer isn't used anywhere inside of qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it doesn't have such private data. The attached patch removes check for non-NULL CMD_SP() from qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using corresponding sg devices. AV: change applies to bus/host reset handlers as well. Signed-off-by: Vladislav Bolkhovitin Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ec7ebb6..1e2b95b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -744,7 +744,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -755,8 +754,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -875,7 +873,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -886,8 +883,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -936,7 +932,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -947,8 +942,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, -- cgit v1.1 From c2602c48b5ebde55b418ba252737bf60caa4bab0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 1 Aug 2006 13:48:16 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.01.05-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index d2d6834..f5826bf 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.05-k3" +#define QLA2XXX_VERSION "8.01.05-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 -- cgit v1.1 From fea9d6c7bcd8ff1d60ff74f27ba483b3820b18a3 Mon Sep 17 00:00:00 2001 From: Volker Sameske Date: Wed, 2 Aug 2006 11:05:16 +0200 Subject: [SCSI] zfcp: improve management of request IDs Improve request handling. Use hash table to manage request IDs. Signed-off-by: Volker Sameske Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 120 +++++++++++++++++++++++++++++++++++++---- drivers/s390/scsi/zfcp_ccw.c | 5 ++ drivers/s390/scsi/zfcp_def.h | 11 ++-- drivers/s390/scsi/zfcp_erp.c | 16 +++--- drivers/s390/scsi/zfcp_ext.h | 6 ++- drivers/s390/scsi/zfcp_fsf.c | 122 ++++++++++++++++++++++-------------------- drivers/s390/scsi/zfcp_qdio.c | 79 +++++++++++---------------- 7 files changed, 231 insertions(+), 128 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 9cd789b..adc9d8f 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -112,6 +112,105 @@ _zfcp_hex_dump(char *addr, int count) printk("\n"); } + +/****************************************************************/ +/****** Functions to handle the request ID hash table ********/ +/****************************************************************/ + +#define ZFCP_LOG_AREA ZFCP_LOG_AREA_FSF + +static int zfcp_reqlist_init(struct zfcp_adapter *adapter) +{ + int i; + + adapter->req_list = kcalloc(REQUEST_LIST_SIZE, sizeof(struct list_head), + GFP_KERNEL); + + if (!adapter->req_list) + return -ENOMEM; + + for (i=0; ireq_list[i]); + + return 0; +} + +static void zfcp_reqlist_free(struct zfcp_adapter *adapter) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i; + + for (i=0; ireq_list[i])) + continue; + + list_for_each_entry_safe(request, tmp, + &adapter->req_list[i], list) + list_del(&request->list); + } + + kfree(adapter->req_list); +} + +void zfcp_reqlist_add(struct zfcp_adapter *adapter, + struct zfcp_fsf_req *fsf_req) +{ + unsigned int i; + + i = fsf_req->req_id % REQUEST_LIST_SIZE; + list_add_tail(&fsf_req->list, &adapter->req_list[i]); +} + +void zfcp_reqlist_remove(struct zfcp_adapter *adapter, unsigned long req_id) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i, counter; + u64 dbg_tmp[2]; + + i = req_id % REQUEST_LIST_SIZE; + BUG_ON(list_empty(&adapter->req_list[i])); + + counter = 0; + list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list) { + if (request->req_id == req_id) { + dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active); + dbg_tmp[1] = (u64) counter; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + list_del(&request->list); + break; + } + counter++; + } +} + +struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *adapter, + unsigned long req_id) +{ + struct zfcp_fsf_req *request, *tmp; + unsigned int i; + + i = req_id % REQUEST_LIST_SIZE; + + list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list) + if (request->req_id == req_id) + return request; + + return NULL; +} + +int zfcp_reqlist_isempty(struct zfcp_adapter *adapter) +{ + unsigned int i; + + for (i=0; ireq_list[i])) + return 0; + + return 1; +} + +#undef ZFCP_LOG_AREA + /****************************************************************/ /************** Uncategorised Functions *************************/ /****************************************************************/ @@ -961,8 +1060,12 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device) INIT_LIST_HEAD(&adapter->port_remove_lh); /* initialize list of fsf requests */ - spin_lock_init(&adapter->fsf_req_list_lock); - INIT_LIST_HEAD(&adapter->fsf_req_list_head); + spin_lock_init(&adapter->req_list_lock); + retval = zfcp_reqlist_init(adapter); + if (retval) { + ZFCP_LOG_INFO("request list initialization failed\n"); + goto failed_low_mem_buffers; + } /* initialize debug locks */ @@ -1041,8 +1144,6 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device) * !0 - struct zfcp_adapter data structure could not be removed * (e.g. still used) * locks: adapter list write lock is assumed to be held by caller - * adapter->fsf_req_list_lock is taken and released within this - * function and must not be held on entry */ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) @@ -1054,14 +1155,14 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter) zfcp_sysfs_adapter_remove_files(&adapter->ccw_device->dev); dev_set_drvdata(&adapter->ccw_device->dev, NULL); /* sanity check: no pending FSF requests */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - retval = !list_empty(&adapter->fsf_req_list_head); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - if (retval) { + spin_lock_irqsave(&adapter->req_list_lock, flags); + retval = zfcp_reqlist_isempty(adapter); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + if (!retval) { ZFCP_LOG_NORMAL("bug: adapter %s (%p) still in use, " "%i requests outstanding\n", zfcp_get_busid_by_adapter(adapter), adapter, - atomic_read(&adapter->fsf_reqs_active)); + atomic_read(&adapter->reqs_active)); retval = -EBUSY; goto out; } @@ -1087,6 +1188,7 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter) zfcp_free_low_mem_buffers(adapter); /* free memory of adapter data structure and queues */ zfcp_qdio_free_queues(adapter); + zfcp_reqlist_free(adapter); kfree(adapter->fc_stats); kfree(adapter->stats_reset_data); ZFCP_LOG_TRACE("freeing adapter structure\n"); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 57d8e4b..fdabade 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -164,6 +164,11 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device) retval = zfcp_adapter_scsi_register(adapter); if (retval) goto out_scsi_register; + + /* initialize request counter */ + BUG_ON(!zfcp_reqlist_isempty(adapter)); + adapter->req_no = 0; + zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 2df512a..72293f3 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -886,11 +886,11 @@ struct zfcp_adapter { struct list_head port_remove_lh; /* head of ports to be removed */ u32 ports; /* number of remote ports */ - struct timer_list scsi_er_timer; /* SCSI err recovery watch */ - struct list_head fsf_req_list_head; /* head of FSF req list */ - spinlock_t fsf_req_list_lock; /* lock for ops on list of - FSF requests */ - atomic_t fsf_reqs_active; /* # active FSF reqs */ + struct timer_list scsi_er_timer; /* SCSI err recovery watch */ + atomic_t reqs_active; /* # active FSF reqs */ + unsigned long req_no; /* unique FSF req number */ + struct list_head *req_list; /* list of pending reqs */ + spinlock_t req_list_lock; /* request list lock */ struct zfcp_qdio_queue request_queue; /* request queue */ u32 fsf_req_seq_no; /* FSF cmnd seq number */ wait_queue_head_t request_wq; /* can be used to wait for @@ -986,6 +986,7 @@ struct zfcp_unit { /* FSF request */ struct zfcp_fsf_req { struct list_head list; /* list of FSF requests */ + unsigned long req_id; /* unique request ID */ struct zfcp_adapter *adapter; /* adapter request belongs to */ u8 sbal_number; /* nr of SBALs free for use */ u8 sbal_first; /* first SBAL for this request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 8ec8da0..f74412b 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -848,18 +848,16 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) struct zfcp_adapter *adapter = erp_action->adapter; if (erp_action->fsf_req) { - /* take lock to ensure that request is not being deleted meanwhile */ - spin_lock(&adapter->fsf_req_list_lock); - /* check whether fsf req does still exist */ - list_for_each_entry(fsf_req, &adapter->fsf_req_list_head, list) - if (fsf_req == erp_action->fsf_req) - break; - if (fsf_req && (fsf_req->erp_action == erp_action)) { + /* take lock to ensure that request is not deleted meanwhile */ + spin_lock(&adapter->req_list_lock); + if ((!zfcp_reqlist_ismember(adapter, + erp_action->fsf_req->req_id)) && + (fsf_req->erp_action == erp_action)) { /* fsf_req still exists */ debug_text_event(adapter->erp_dbf, 3, "a_ca_req"); debug_event(adapter->erp_dbf, 3, &fsf_req, sizeof (unsigned long)); - /* dismiss fsf_req of timed out or dismissed erp_action */ + /* dismiss fsf_req of timed out/dismissed erp_action */ if (erp_action->status & (ZFCP_STATUS_ERP_DISMISSED | ZFCP_STATUS_ERP_TIMEDOUT)) { debug_text_event(adapter->erp_dbf, 3, @@ -892,7 +890,7 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) */ erp_action->fsf_req = NULL; } - spin_unlock(&adapter->fsf_req_list_lock); + spin_unlock(&adapter->req_list_lock); } else debug_text_event(adapter->erp_dbf, 3, "a_ca_noreq"); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index d023660..04bb3a9 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -63,7 +63,6 @@ extern int zfcp_qdio_allocate_queues(struct zfcp_adapter *); extern void zfcp_qdio_free_queues(struct zfcp_adapter *); extern int zfcp_qdio_determine_pci(struct zfcp_qdio_queue *, struct zfcp_fsf_req *); -extern int zfcp_qdio_reqid_check(struct zfcp_adapter *, void *); extern volatile struct qdio_buffer_element *zfcp_qdio_sbale_req (struct zfcp_fsf_req *, int, int); @@ -190,5 +189,10 @@ extern void zfcp_scsi_dbf_event_abort(const char *, struct zfcp_adapter *, struct zfcp_fsf_req *); extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *, struct scsi_cmnd *); +extern void zfcp_reqlist_add(struct zfcp_adapter *, struct zfcp_fsf_req *); +extern void zfcp_reqlist_remove(struct zfcp_adapter *, unsigned long); +extern struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *, + unsigned long); +extern int zfcp_reqlist_isempty(struct zfcp_adapter *); #endif /* ZFCP_EXT_H */ diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 31db2b0..ff2eacf 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -49,7 +49,6 @@ static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *); static void zfcp_fsf_link_down_info_eval(struct zfcp_adapter *, struct fsf_link_down_info *); static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *); -static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *); /* association between FSF command and FSF QTCB type */ static u32 fsf_qtcb_type[] = { @@ -146,47 +145,48 @@ zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req) kfree(fsf_req); } -/* - * function: - * - * purpose: - * - * returns: - * - * note: qdio queues shall be down (no ongoing inbound processing) +/** + * zfcp_fsf_req_dismiss - dismiss a single fsf request */ -int -zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) +static void zfcp_fsf_req_dismiss(struct zfcp_adapter *adapter, + struct zfcp_fsf_req *fsf_req, + unsigned int counter) { - struct zfcp_fsf_req *fsf_req, *tmp; - unsigned long flags; - LIST_HEAD(remove_queue); + u64 dbg_tmp[2]; - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_splice_init(&adapter->fsf_req_list_head, &remove_queue); - atomic_set(&adapter->fsf_reqs_active, 0); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - - list_for_each_entry_safe(fsf_req, tmp, &remove_queue, list) { - list_del(&fsf_req->list); - zfcp_fsf_req_dismiss(fsf_req); - } - - return 0; + dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active); + dbg_tmp[1] = (u64) counter; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + list_del(&fsf_req->list); + fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; + zfcp_fsf_req_complete(fsf_req); } -/* - * function: - * - * purpose: - * - * returns: +/** + * zfcp_fsf_req_dismiss_all - dismiss all remaining fsf requests */ -static void -zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req) +int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) { - fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; - zfcp_fsf_req_complete(fsf_req); + struct zfcp_fsf_req *request, *tmp; + unsigned long flags; + unsigned int i, counter; + + spin_lock_irqsave(&adapter->req_list_lock, flags); + atomic_set(&adapter->reqs_active, 0); + for (i=0; ireq_list[i])) + continue; + + counter = 0; + list_for_each_entry_safe(request, tmp, + &adapter->req_list[i], list) { + zfcp_fsf_req_dismiss(adapter, request, counter); + counter++; + } + } + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + + return 0; } /* @@ -4592,12 +4592,14 @@ static inline void zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req) { if (likely(fsf_req->qtcb != NULL)) { - fsf_req->qtcb->prefix.req_seq_no = fsf_req->adapter->fsf_req_seq_no; - fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req; + fsf_req->qtcb->prefix.req_seq_no = + fsf_req->adapter->fsf_req_seq_no; + fsf_req->qtcb->prefix.req_id = fsf_req->req_id; fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION; - fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_req->fsf_command]; + fsf_req->qtcb->prefix.qtcb_type = + fsf_qtcb_type[fsf_req->fsf_command]; fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION; - fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req; + fsf_req->qtcb->header.req_handle = fsf_req->req_id; fsf_req->qtcb->header.fsf_command = fsf_req->fsf_command; } } @@ -4654,6 +4656,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, { volatile struct qdio_buffer_element *sbale; struct zfcp_fsf_req *fsf_req = NULL; + unsigned long flags; int ret = 0; struct zfcp_qdio_queue *req_queue = &adapter->request_queue; @@ -4668,6 +4671,12 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, fsf_req->adapter = adapter; fsf_req->fsf_command = fsf_cmd; + INIT_LIST_HEAD(&fsf_req->list); + + /* unique request id */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + fsf_req->req_id = adapter->req_no++; + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_fsf_req_qtcb_init(fsf_req); @@ -4707,7 +4716,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); /* setup common SBALE fields */ - sbale[0].addr = fsf_req; + sbale[0].addr = (void *) fsf_req->req_id; sbale[0].flags |= SBAL_FLAGS0_COMMAND; if (likely(fsf_req->qtcb != NULL)) { sbale[1].addr = (void *) fsf_req->qtcb; @@ -4747,7 +4756,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) volatile struct qdio_buffer_element *sbale; int inc_seq_no; int new_distance_from_int; - unsigned long flags; + u64 dbg_tmp[2]; int retval = 0; adapter = fsf_req->adapter; @@ -4761,10 +4770,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr, sbale[1].length); - /* put allocated FSF request at list tail */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); + /* put allocated FSF request into hash table */ + spin_lock(&adapter->req_list_lock); + zfcp_reqlist_add(adapter, fsf_req); + spin_unlock(&adapter->req_list_lock); inc_seq_no = (fsf_req->qtcb != NULL); @@ -4803,6 +4812,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) QDIO_FLAG_SYNC_OUTPUT, 0, fsf_req->sbal_first, fsf_req->sbal_number, NULL); + dbg_tmp[0] = (unsigned long) sbale[0].addr; + dbg_tmp[1] = (u64) retval; + debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); + if (unlikely(retval)) { /* Queues are down..... */ retval = -EIO; @@ -4812,22 +4825,17 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) */ if (timer) del_timer(timer); - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - list_del(&fsf_req->list); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - /* - * adjust the number of free SBALs in request queue as well as - * position of first one - */ + spin_lock(&adapter->req_list_lock); + zfcp_reqlist_remove(adapter, fsf_req->req_id); + spin_unlock(&adapter->req_list_lock); + /* undo changes in request queue made for this request */ zfcp_qdio_zero_sbals(req_queue->buffer, fsf_req->sbal_first, fsf_req->sbal_number); atomic_add(fsf_req->sbal_number, &req_queue->free_count); - req_queue->free_index -= fsf_req->sbal_number; /* increase */ + req_queue->free_index -= fsf_req->sbal_number; req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q; req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ - ZFCP_LOG_DEBUG - ("error: do_QDIO failed. Buffers could not be enqueued " - "to request queue.\n"); + zfcp_erp_adapter_reopen(adapter, 0); } else { req_queue->distance_from_int = new_distance_from_int; /* @@ -4843,7 +4851,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer) adapter->fsf_req_seq_no++; /* count FSF requests pending */ - atomic_inc(&adapter->fsf_reqs_active); + atomic_inc(&adapter->reqs_active); } return retval; } diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 49ea5ad..dbd9f48 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -282,6 +282,37 @@ zfcp_qdio_request_handler(struct ccw_device *ccw_device, return; } +/** + * zfcp_qdio_reqid_check - checks for valid reqids or unsolicited status + */ +static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, + unsigned long req_id) +{ + struct zfcp_fsf_req *fsf_req; + unsigned long flags; + + debug_long_event(adapter->erp_dbf, 4, req_id); + + spin_lock_irqsave(&adapter->req_list_lock, flags); + fsf_req = zfcp_reqlist_ismember(adapter, req_id); + + if (!fsf_req) { + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + ZFCP_LOG_NORMAL("error: unknown request id (%ld).\n", req_id); + zfcp_erp_adapter_reopen(adapter, 0); + return -EINVAL; + } + + zfcp_reqlist_remove(adapter, req_id); + atomic_dec(&adapter->reqs_active); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); + + /* finish the FSF request */ + zfcp_fsf_req_complete(fsf_req); + + return 0; +} + /* * function: zfcp_qdio_response_handler * @@ -344,7 +375,7 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device, /* look for QDIO request identifiers in SB */ buffere = &buffer->element[buffere_index]; retval = zfcp_qdio_reqid_check(adapter, - (void *) buffere->addr); + (unsigned long) buffere->addr); if (retval) { ZFCP_LOG_NORMAL("bug: unexpected inbound " @@ -415,52 +446,6 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device, return; } -/* - * function: zfcp_qdio_reqid_check - * - * purpose: checks for valid reqids or unsolicited status - * - * returns: 0 - valid request id or unsolicited status - * !0 - otherwise - */ -int -zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, void *sbale_addr) -{ - struct zfcp_fsf_req *fsf_req; - unsigned long flags; - - /* invalid (per convention used in this driver) */ - if (unlikely(!sbale_addr)) { - ZFCP_LOG_NORMAL("bug: invalid reqid\n"); - return -EINVAL; - } - - /* valid request id and thus (hopefully :) valid fsf_req address */ - fsf_req = (struct zfcp_fsf_req *) sbale_addr; - - /* serialize with zfcp_fsf_req_dismiss_all */ - spin_lock_irqsave(&adapter->fsf_req_list_lock, flags); - if (list_empty(&adapter->fsf_req_list_head)) { - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - return 0; - } - list_del(&fsf_req->list); - atomic_dec(&adapter->fsf_reqs_active); - spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags); - - if (unlikely(adapter != fsf_req->adapter)) { - ZFCP_LOG_NORMAL("bug: invalid reqid (fsf_req=%p, " - "fsf_req->adapter=%p, adapter=%p)\n", - fsf_req, fsf_req->adapter, adapter); - return -EINVAL; - } - - /* finish the FSF request */ - zfcp_fsf_req_complete(fsf_req); - - return 0; -} - /** * zfcp_qdio_sbale_get - return pointer to SBALE of qdio_queue * @queue: queue from which SBALE should be returned -- cgit v1.1 From f6c0e7a7b3b6db15146877c0cef43b413af5b76e Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 2 Aug 2006 11:05:52 +0200 Subject: [SCSI] zfcp: minor erp bug fixes Bug fixes for zfcp's erp: - trigger adapter reopen if do_QDIO fails - avoid erp deadlock if registration of scsi target or remote port hang - do not treat as error if exchange port data fails - decrease timeout for target reset and aborts - mark unit failed if slave_destroy is called Additionally some code cleanup was done: - made some functions void when retval is not of interest - shortened initialization of zfcp's host_template - corrected some comments Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 2 +- drivers/s390/scsi/zfcp_erp.c | 196 +++++++++++++++--------------------------- drivers/s390/scsi/zfcp_ext.h | 3 +- drivers/s390/scsi/zfcp_scsi.c | 73 ++++++++-------- 4 files changed, 107 insertions(+), 167 deletions(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 72293f3..904d6a7 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -80,7 +80,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list) #define REQUEST_LIST_SIZE 128 /********************* SCSI SPECIFIC DEFINES *********************************/ -#define ZFCP_SCSI_ER_TIMEOUT (100*HZ) +#define ZFCP_SCSI_ER_TIMEOUT (10*HZ) /********************* CIO/QDIO SPECIFIC DEFINES *****************************/ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index f74412b..7f60b6f 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -64,8 +64,8 @@ static int zfcp_erp_strategy_check_action(struct zfcp_erp_action *, int); static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *, int); static int zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *); -static int zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *); -static int zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *); +static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *); +static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *); static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *); @@ -93,10 +93,9 @@ static int zfcp_erp_unit_strategy_clearstati(struct zfcp_unit *); static int zfcp_erp_unit_strategy_close(struct zfcp_erp_action *); static int zfcp_erp_unit_strategy_open(struct zfcp_erp_action *); -static int zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *); -static int zfcp_erp_action_dismiss_port(struct zfcp_port *); -static int zfcp_erp_action_dismiss_unit(struct zfcp_unit *); -static int zfcp_erp_action_dismiss(struct zfcp_erp_action *); +static void zfcp_erp_action_dismiss_port(struct zfcp_port *); +static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *); +static void zfcp_erp_action_dismiss(struct zfcp_erp_action *); static int zfcp_erp_action_enqueue(int, struct zfcp_adapter *, struct zfcp_port *, struct zfcp_unit *); @@ -135,29 +134,39 @@ zfcp_fsf_request_timeout_handler(unsigned long data) zfcp_erp_adapter_reopen(adapter, 0); } -/* - * function: zfcp_fsf_scsi_er_timeout_handler - * - * purpose: This function needs to be called whenever a SCSI error recovery - * action (abort/reset) does not return. - * Re-opening the adapter means that the command can be returned - * by zfcp (it is guarranteed that it does not return via the - * adapter anymore). The buffer can then be used again. - * - * returns: sod all +/** + * zfcp_fsf_scsi_er_timeout_handler - timeout handler for scsi eh tasks + * + * This function needs to be called whenever a SCSI error recovery + * action (abort/reset) does not return. Re-opening the adapter means + * that the abort/reset command can be returned by zfcp. It won't complete + * via the adapter anymore (because qdio queues are closed). If ERP is + * already running on this adapter it will be stopped. */ -void -zfcp_fsf_scsi_er_timeout_handler(unsigned long data) +void zfcp_fsf_scsi_er_timeout_handler(unsigned long data) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) data; + unsigned long flags; ZFCP_LOG_NORMAL("warning: SCSI error recovery timed out. " "Restarting all operations on the adapter %s\n", zfcp_get_busid_by_adapter(adapter)); debug_text_event(adapter->erp_dbf, 1, "eh_lmem_tout"); - zfcp_erp_adapter_reopen(adapter, 0); - return; + write_lock_irqsave(&adapter->erp_lock, flags); + if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING, + &adapter->status)) { + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN, + ZFCP_CLEAR); + zfcp_erp_action_dismiss_adapter(adapter); + write_unlock_irqrestore(&adapter->erp_lock, flags); + /* dismiss all pending requests including requests for ERP */ + zfcp_fsf_req_dismiss_all(adapter); + adapter->fsf_req_seq_no = 0; + } else + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_erp_adapter_reopen(adapter, 0); } /* @@ -670,17 +679,10 @@ zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear_mask) return retval; } -/* - * function: - * - * purpose: disable I/O, - * return any open requests and clean them up, - * aim: no pending and incoming I/O - * - * returns: +/** + * zfcp_erp_adapter_block - mark adapter as blocked, block scsi requests */ -static void -zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) +static void zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) { debug_text_event(adapter->erp_dbf, 6, "a_bl"); zfcp_erp_modify_adapter_status(adapter, @@ -688,15 +690,10 @@ zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask) clear_mask, ZFCP_CLEAR); } -/* - * function: - * - * purpose: enable I/O - * - * returns: +/** + * zfcp_erp_adapter_unblock - mark adapter as unblocked, allow scsi requests */ -static void -zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter) +static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter) { debug_text_event(adapter->erp_dbf, 6, "a_ubl"); atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status); @@ -897,23 +894,15 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) return retval; } -/* - * purpose: generic handler for asynchronous events related to erp_action events - * (normal completion, time-out, dismissing, retry after - * low memory condition) - * - * note: deletion of timer is not required (e.g. in case of a time-out), - * but a second try does no harm, - * we leave it in here to allow for greater simplification +/** + * zfcp_erp_async_handler_nolock - complete erp_action * - * returns: 0 - there was an action to handle - * !0 - otherwise + * Used for normal completion, time-out, dismissal and failure after + * low memory condition. */ -static int -zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, - unsigned long set_mask) +static void zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, + unsigned long set_mask) { - int retval; struct zfcp_adapter *adapter = erp_action->adapter; if (zfcp_erp_action_exists(erp_action) == ZFCP_ERP_ACTION_RUNNING) { @@ -924,43 +913,26 @@ zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action, del_timer(&erp_action->timer); erp_action->status |= set_mask; zfcp_erp_action_ready(erp_action); - retval = 0; } else { /* action is ready or gone - nothing to do */ debug_text_event(adapter->erp_dbf, 3, "a_asyh_gone"); debug_event(adapter->erp_dbf, 3, &erp_action->action, sizeof (int)); - retval = 1; } - - return retval; } -/* - * purpose: generic handler for asynchronous events related to erp_action - * events (normal completion, time-out, dismissing, retry after - * low memory condition) - * - * note: deletion of timer is not required (e.g. in case of a time-out), - * but a second try does no harm, - * we leave it in here to allow for greater simplification - * - * returns: 0 - there was an action to handle - * !0 - otherwise +/** + * zfcp_erp_async_handler - wrapper for erp_async_handler_nolock w/ locking */ -int -zfcp_erp_async_handler(struct zfcp_erp_action *erp_action, - unsigned long set_mask) +void zfcp_erp_async_handler(struct zfcp_erp_action *erp_action, + unsigned long set_mask) { struct zfcp_adapter *adapter = erp_action->adapter; unsigned long flags; - int retval; write_lock_irqsave(&adapter->erp_lock, flags); - retval = zfcp_erp_async_handler_nolock(erp_action, set_mask); + zfcp_erp_async_handler_nolock(erp_action, set_mask); write_unlock_irqrestore(&adapter->erp_lock, flags); - - return retval; } /* @@ -997,17 +969,15 @@ zfcp_erp_timeout_handler(unsigned long data) zfcp_erp_async_handler(erp_action, ZFCP_STATUS_ERP_TIMEDOUT); } -/* - * purpose: is called for an erp_action which needs to be ended - * though not being done, - * this is usually required if an higher is generated, - * action gets an appropriate flag and will be processed - * accordingly +/** + * zfcp_erp_action_dismiss - dismiss an erp_action * - * locks: erp_lock held (thus we need to call another handler variant) + * adapter->erp_lock must be held + * + * Dismissal of an erp_action is usually required if an erp_action of + * higher priority is generated. */ -static int -zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) +static void zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) { struct zfcp_adapter *adapter = erp_action->adapter; @@ -1015,8 +985,6 @@ zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action) debug_event(adapter->erp_dbf, 2, &erp_action->action, sizeof (int)); zfcp_erp_async_handler_nolock(erp_action, ZFCP_STATUS_ERP_DISMISSED); - - return 0; } int @@ -2072,18 +2040,12 @@ zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *erp_action) return retval; } -/* - * function: zfcp_qdio_cleanup - * - * purpose: cleans up QDIO operation for the specified adapter - * - * returns: 0 - successful cleanup - * !0 - failed cleanup +/** + * zfcp_erp_adapter_strategy_close_qdio - close qdio queues for an adapter */ -int +static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) { - int retval = ZFCP_ERP_SUCCEEDED; int first_used; int used_count; struct zfcp_adapter *adapter = erp_action->adapter; @@ -2092,15 +2054,13 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) ZFCP_LOG_DEBUG("error: attempt to shut down inactive QDIO " "queues on adapter %s\n", zfcp_get_busid_by_adapter(adapter)); - retval = ZFCP_ERP_FAILED; - goto out; + return; } /* * Get queue_lock and clear QDIOUP flag. Thus it's guaranteed that * do_QDIO won't be called while qdio_shutdown is in progress. */ - write_lock_irq(&adapter->request_queue.queue_lock); atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status); write_unlock_irq(&adapter->request_queue.queue_lock); @@ -2132,8 +2092,6 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action) adapter->request_queue.free_index = 0; atomic_set(&adapter->request_queue.free_count, 0); adapter->request_queue.distance_from_int = 0; - out: - return retval; } static int @@ -2256,11 +2214,11 @@ zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action) "%s)\n", zfcp_get_busid_by_adapter(adapter)); ret = ZFCP_ERP_FAILED; } - if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) { - ZFCP_LOG_INFO("error: exchange port data failed (adapter " + + /* don't treat as error for the sake of compatibility */ + if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) + ZFCP_LOG_INFO("warning: exchange port data failed (adapter " "%s\n", zfcp_get_busid_by_adapter(adapter)); - ret = ZFCP_ERP_FAILED; - } return ret; } @@ -2290,18 +2248,12 @@ zfcp_erp_adapter_strategy_open_fsf_statusread(struct zfcp_erp_action return retval; } -/* - * function: zfcp_fsf_cleanup - * - * purpose: cleanup FSF operation for specified adapter - * - * returns: 0 - FSF operation successfully cleaned up - * !0 - failed to cleanup FSF operation for this adapter +/** + * zfcp_erp_adapter_strategy_close_fsf - stop FSF operations for an adapter */ -static int +static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action) { - int retval = ZFCP_ERP_SUCCEEDED; struct zfcp_adapter *adapter = erp_action->adapter; /* @@ -2315,8 +2267,6 @@ zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action) /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); - - return retval; } /* @@ -3291,10 +3241,8 @@ zfcp_erp_action_cleanup(int action, struct zfcp_adapter *adapter, } -static int -zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) +void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) { - int retval = 0; struct zfcp_port *port; debug_text_event(adapter->erp_dbf, 5, "a_actab"); @@ -3303,14 +3251,10 @@ zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter) else list_for_each_entry(port, &adapter->port_list_head, list) zfcp_erp_action_dismiss_port(port); - - return retval; } -static int -zfcp_erp_action_dismiss_port(struct zfcp_port *port) +static void zfcp_erp_action_dismiss_port(struct zfcp_port *port) { - int retval = 0; struct zfcp_unit *unit; struct zfcp_adapter *adapter = port->adapter; @@ -3321,22 +3265,16 @@ zfcp_erp_action_dismiss_port(struct zfcp_port *port) else list_for_each_entry(unit, &port->unit_list_head, list) zfcp_erp_action_dismiss_unit(unit); - - return retval; } -static int -zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit) +static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit) { - int retval = 0; struct zfcp_adapter *adapter = unit->port->adapter; debug_text_event(adapter->erp_dbf, 5, "u_actab"); debug_event(adapter->erp_dbf, 5, &unit->fcp_lun, sizeof (fcp_lun_t)); if (atomic_test_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &unit->status)) zfcp_erp_action_dismiss(&unit->erp_action); - - return retval; } static inline void diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 04bb3a9..146d7a2 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -139,6 +139,7 @@ extern void zfcp_erp_modify_adapter_status(struct zfcp_adapter *, u32, int); extern int zfcp_erp_adapter_reopen(struct zfcp_adapter *, int); extern int zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int); extern void zfcp_erp_adapter_failed(struct zfcp_adapter *); +extern void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *); extern void zfcp_erp_modify_port_status(struct zfcp_port *, u32, int); extern int zfcp_erp_port_reopen(struct zfcp_port *, int); @@ -155,7 +156,7 @@ extern void zfcp_erp_unit_failed(struct zfcp_unit *); extern int zfcp_erp_thread_setup(struct zfcp_adapter *); extern int zfcp_erp_thread_kill(struct zfcp_adapter *); extern int zfcp_erp_wait(struct zfcp_adapter *); -extern int zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long); +extern void zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long); extern int zfcp_test_link(struct zfcp_port *); diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 671f4a6..1bb5508 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -30,7 +30,6 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *, void (*done) (struct scsi_cmnd *)); static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *); static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *); -static int zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *); static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *); static int zfcp_task_management_function(struct zfcp_unit *, u8, struct scsi_cmnd *); @@ -46,30 +45,22 @@ struct zfcp_data zfcp_data = { .scsi_host_template = { .name = ZFCP_NAME, .proc_name = "zfcp", - .proc_info = NULL, - .detect = NULL, .slave_alloc = zfcp_scsi_slave_alloc, .slave_configure = zfcp_scsi_slave_configure, .slave_destroy = zfcp_scsi_slave_destroy, .queuecommand = zfcp_scsi_queuecommand, .eh_abort_handler = zfcp_scsi_eh_abort_handler, .eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler, - .eh_bus_reset_handler = zfcp_scsi_eh_bus_reset_handler, + .eh_bus_reset_handler = zfcp_scsi_eh_host_reset_handler, .eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler, .can_queue = 4096, .this_id = -1, - /* - * FIXME: - * one less? can zfcp_create_sbale cope with it? - */ .sg_tablesize = ZFCP_MAX_SBALES_PER_REQ, .cmd_per_lun = 1, - .unchecked_isa_dma = 0, .use_clustering = 1, .sdev_attrs = zfcp_sysfs_sdev_attrs, }, .driver_version = ZFCP_VERSION, - /* rest initialised with zeros */ }; /* Find start of Response Information in FCP response unit*/ @@ -176,8 +167,14 @@ zfcp_scsi_slave_alloc(struct scsi_device *sdp) return retval; } -static void -zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) +/** + * zfcp_scsi_slave_destroy - called when scsi device is removed + * + * Remove reference to associated scsi device for an zfcp_unit. + * Mark zfcp_unit as failed. The scsi device might be deleted via sysfs + * or a scan for this device might have failed. + */ +static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; @@ -185,6 +182,7 @@ zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); sdpnt->hostdata = NULL; unit->device = NULL; + zfcp_erp_unit_failed(unit); zfcp_unit_put(unit); } else { ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at " @@ -549,35 +547,38 @@ zfcp_task_management_function(struct zfcp_unit *unit, u8 tm_flags, } /** - * zfcp_scsi_eh_bus_reset_handler - reset bus (reopen adapter) + * zfcp_scsi_eh_host_reset_handler - handler for host and bus reset + * + * If ERP is already running it will be stopped. */ -int -zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *scpnt) +int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { - struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata; - struct zfcp_adapter *adapter = unit->port->adapter; - - ZFCP_LOG_NORMAL("bus reset because of problems with " - "unit 0x%016Lx\n", unit->fcp_lun); - zfcp_erp_adapter_reopen(adapter, 0); - zfcp_erp_wait(adapter); - - return SUCCESS; -} + struct zfcp_unit *unit; + struct zfcp_adapter *adapter; + unsigned long flags; -/** - * zfcp_scsi_eh_host_reset_handler - reset host (reopen adapter) - */ -int -zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) -{ - struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata; - struct zfcp_adapter *adapter = unit->port->adapter; + unit = (struct zfcp_unit*) scpnt->device->hostdata; + adapter = unit->port->adapter; - ZFCP_LOG_NORMAL("host reset because of problems with " + ZFCP_LOG_NORMAL("host/bus reset because of problems with " "unit 0x%016Lx\n", unit->fcp_lun); - zfcp_erp_adapter_reopen(adapter, 0); - zfcp_erp_wait(adapter); + + write_lock_irqsave(&adapter->erp_lock, flags); + if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING, + &adapter->status)) { + zfcp_erp_modify_adapter_status(adapter, + ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN, + ZFCP_CLEAR); + zfcp_erp_action_dismiss_adapter(adapter); + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_fsf_req_dismiss_all(adapter); + adapter->fsf_req_seq_no = 0; + zfcp_erp_adapter_reopen(adapter, 0); + } else { + write_unlock_irqrestore(&adapter->erp_lock, flags); + zfcp_erp_adapter_reopen(adapter, 0); + zfcp_erp_wait(adapter); + } return SUCCESS; } -- cgit v1.1 From 58b3ac07fed31ffc1349380b78305af6522fe1f4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 2 Aug 2006 11:06:21 +0200 Subject: [SCSI] zfcp: bump version number New version number fo zfcp driver. Signed-off-by: Andreas Herrmann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 904d6a7..94d1b74d 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -52,7 +52,7 @@ /********************* GENERAL DEFINES *********************************/ /* zfcp version number, it consists of major, minor, and patch-level number */ -#define ZFCP_VERSION "4.7.0" +#define ZFCP_VERSION "4.8.0" /** * zfcp_sg_to_address - determine kernel address from struct scatterlist -- cgit v1.1 From 3e74051bc7b780c5ba28939f9d5c4cd3280a5ff7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Jul 2006 19:13:36 +0200 Subject: [SCSI] hptiop: backout ioctl mess The hptiop just got merged with a horrible amount of really bad ioctl code that is against the standards for new scsi drivers. This patch backs it out (and fixes a small bug where scsi_add_host is called to early). We can re-add proper APIs once we agree on them. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/hptiop.c | 566 +------------------------------------------------- 1 file changed, 8 insertions(+), 558 deletions(-) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 74d4d22..bcb3444 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -45,10 +45,6 @@ static char driver_name[] = "hptiop"; static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver"; static const char driver_ver[] = "v1.0 (060426)"; -static DEFINE_SPINLOCK(hptiop_hba_list_lock); -static LIST_HEAD(hptiop_hba_list); -static int hptiop_cdev_major = -1; - static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg); @@ -620,532 +616,11 @@ static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev, return queue_depth; } -struct hptiop_getinfo { - char __user *buffer; - loff_t buflength; - loff_t bufoffset; - loff_t buffillen; - loff_t filpos; -}; - -static void hptiop_copy_mem_info(struct hptiop_getinfo *pinfo, - char *data, int datalen) -{ - if (pinfo->filpos < pinfo->bufoffset) { - if (pinfo->filpos + datalen <= pinfo->bufoffset) { - pinfo->filpos += datalen; - return; - } else { - data += (pinfo->bufoffset - pinfo->filpos); - datalen -= (pinfo->bufoffset - pinfo->filpos); - pinfo->filpos = pinfo->bufoffset; - } - } - - pinfo->filpos += datalen; - if (pinfo->buffillen == pinfo->buflength) - return; - - if (pinfo->buflength - pinfo->buffillen < datalen) - datalen = pinfo->buflength - pinfo->buffillen; - - if (copy_to_user(pinfo->buffer + pinfo->buffillen, data, datalen)) - return; - - pinfo->buffillen += datalen; -} - -static int hptiop_copy_info(struct hptiop_getinfo *pinfo, char *fmt, ...) -{ - va_list args; - char buf[128]; - int len; - - va_start(args, fmt); - len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - hptiop_copy_mem_info(pinfo, buf, len); - return len; -} - -static void hptiop_ioctl_done(struct hpt_ioctl_k *arg) -{ - arg->done = NULL; - wake_up(&arg->hba->ioctl_wq); -} - -static void hptiop_do_ioctl(struct hpt_ioctl_k *arg) -{ - struct hptiop_hba *hba = arg->hba; - u32 val; - struct hpt_iop_request_ioctl_command __iomem *req; - int ioctl_retry = 0; - - dprintk("scsi%d: hptiop_do_ioctl\n", hba->host->host_no); - - /* - * check (in + out) buff size from application. - * outbuf must be dword aligned. - */ - if (((arg->inbuf_size + 3) & ~3) + arg->outbuf_size > - hba->max_request_size - - sizeof(struct hpt_iop_request_header) - - 4 * sizeof(u32)) { - dprintk("scsi%d: ioctl buf size (%d/%d) is too large\n", - hba->host->host_no, - arg->inbuf_size, arg->outbuf_size); - arg->result = HPT_IOCTL_RESULT_FAILED; - return; - } - -retry: - spin_lock_irq(hba->host->host_lock); - - val = readl(&hba->iop->inbound_queue); - if (val == IOPMU_QUEUE_EMPTY) { - spin_unlock_irq(hba->host->host_lock); - dprintk("scsi%d: no free req for ioctl\n", hba->host->host_no); - arg->result = -1; - return; - } - - req = (struct hpt_iop_request_ioctl_command __iomem *) - ((unsigned long)hba->iop + val); - - writel(HPT_CTL_CODE_LINUX_TO_IOP(arg->ioctl_code), - &req->ioctl_code); - writel(arg->inbuf_size, &req->inbuf_size); - writel(arg->outbuf_size, &req->outbuf_size); - - /* - * use the buffer on the IOP local memory first, then copy it - * back to host. - * the caller's request buffer shoudl be little-endian. - */ - if (arg->inbuf_size) - memcpy_toio(req->buf, arg->inbuf, arg->inbuf_size); - - /* correct the controller ID for IOP */ - if ((arg->ioctl_code == HPT_IOCTL_GET_CHANNEL_INFO || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO_V2 || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO) - && arg->inbuf_size >= sizeof(u32)) - writel(0, req->buf); - - writel(IOP_REQUEST_TYPE_IOCTL_COMMAND, &req->header.type); - writel(0, &req->header.flags); - writel(offsetof(struct hpt_iop_request_ioctl_command, buf) - + arg->inbuf_size, &req->header.size); - writel((u32)(unsigned long)arg, &req->header.context); - writel(BITS_PER_LONG > 32 ? (u32)((unsigned long)arg>>32) : 0, - &req->header.context_hi32); - writel(IOP_RESULT_PENDING, &req->header.result); - - arg->result = HPT_IOCTL_RESULT_FAILED; - arg->done = hptiop_ioctl_done; - - writel(val, &hba->iop->inbound_queue); - hptiop_pci_posting_flush(hba->iop); - - spin_unlock_irq(hba->host->host_lock); - - wait_event_timeout(hba->ioctl_wq, arg->done == NULL, 60 * HZ); - - if (arg->done != NULL) { - hptiop_reset_hba(hba); - if (ioctl_retry++ < 3) - goto retry; - } - - dprintk("hpt_iop_ioctl %x result %d\n", - arg->ioctl_code, arg->result); -} - -static int __hpt_do_ioctl(struct hptiop_hba *hba, u32 code, void *inbuf, - u32 insize, void *outbuf, u32 outsize) -{ - struct hpt_ioctl_k arg; - arg.hba = hba; - arg.ioctl_code = code; - arg.inbuf = inbuf; - arg.outbuf = outbuf; - arg.inbuf_size = insize; - arg.outbuf_size = outsize; - arg.bytes_returned = NULL; - hptiop_do_ioctl(&arg); - return arg.result; -} - -static inline int hpt_id_valid(__le32 id) -{ - return id != 0 && id != cpu_to_le32(0xffffffff); -} - -static int hptiop_get_controller_info(struct hptiop_hba *hba, - struct hpt_controller_info *pinfo) -{ - int id = 0; - - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CONTROLLER_INFO, - &id, sizeof(int), pinfo, sizeof(*pinfo)); -} - - -static int hptiop_get_channel_info(struct hptiop_hba *hba, int bus, - struct hpt_channel_info *pinfo) -{ - u32 ids[2]; - - ids[0] = 0; - ids[1] = bus; - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CHANNEL_INFO, - ids, sizeof(ids), pinfo, sizeof(*pinfo)); - -} - -static int hptiop_get_logical_devices(struct hptiop_hba *hba, - __le32 *pids, int maxcount) -{ - int i; - u32 count = maxcount - 1; - - if (__hpt_do_ioctl(hba, HPT_IOCTL_GET_LOGICAL_DEVICES, - &count, sizeof(u32), - pids, sizeof(u32) * maxcount)) - return -1; - - maxcount = le32_to_cpu(pids[0]); - for (i = 0; i < maxcount; i++) - pids[i] = pids[i+1]; - - return maxcount; -} - -static int hptiop_get_device_info_v3(struct hptiop_hba *hba, __le32 id, - struct hpt_logical_device_info_v3 *pinfo) -{ - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_DEVICE_INFO_V3, - &id, sizeof(u32), - pinfo, sizeof(*pinfo)); -} - -static const char *get_array_status(struct hpt_logical_device_info_v3 *devinfo) -{ - static char s[64]; - u32 flags = le32_to_cpu(devinfo->u.array.flags); - u32 trans_prog = le32_to_cpu(devinfo->u.array.transforming_progress); - u32 reb_prog = le32_to_cpu(devinfo->u.array.rebuilding_progress); - - if (flags & ARRAY_FLAG_DISABLED) - return "Disabled"; - else if (flags & ARRAY_FLAG_TRANSFORMING) - sprintf(s, "Expanding/Migrating %d.%d%%%s%s", - trans_prog / 100, - trans_prog % 100, - (flags & (ARRAY_FLAG_NEEDBUILDING|ARRAY_FLAG_BROKEN))? - ", Critical" : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if ((flags & ARRAY_FLAG_BROKEN) && - devinfo->u.array.array_type != AT_RAID6) - return "Critical"; - else if (flags & ARRAY_FLAG_REBUILDING) - sprintf(s, - (flags & ARRAY_FLAG_NEEDINITIALIZING)? - "%sBackground initializing %d.%d%%" : - "%sRebuilding %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_VERIFYING) - sprintf(s, "%sVerifying %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_INITIALIZING) - sprintf(s, "%sForground initializing %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_NEEDTRANSFORM) - sprintf(s,"%s%s%s", "Need Expanding/Migrating", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if (flags & ARRAY_FLAG_NEEDINITIALIZING && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING)) - sprintf(s,"%sUninitialized", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : ""); - else if ((flags & ARRAY_FLAG_NEEDBUILDING) || - (flags & ARRAY_FLAG_BROKEN)) - return "Critical"; - else - return "Normal"; - return s; -} - -static void hptiop_dump_devinfo(struct hptiop_hba *hba, - struct hptiop_getinfo *pinfo, __le32 id, int indent) -{ - struct hpt_logical_device_info_v3 devinfo; - int i; - u64 capacity; - - for (i = 0; i < indent; i++) - hptiop_copy_info(pinfo, "\t"); - - if (hptiop_get_device_info_v3(hba, id, &devinfo)) { - hptiop_copy_info(pinfo, "unknown\n"); - return; - } - - switch (devinfo.type) { - - case LDT_DEVICE: { - struct hd_driveid *driveid; - u32 flags = le32_to_cpu(devinfo.u.device.flags); - - driveid = (struct hd_driveid *)devinfo.u.device.ident; - /* model[] is 40 chars long, but we just want 20 chars here */ - driveid->model[20] = 0; - - if (indent) - if (flags & DEVICE_FLAG_DISABLED) - hptiop_copy_info(pinfo,"Missing\n"); - else - hptiop_copy_info(pinfo, "CH%d %s\n", - devinfo.u.device.path_id + 1, - driveid->model); - else { - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, - "CH%d %s, %lluMB, %s %s%s%s%s\n", - devinfo.u.device.path_id + 1, - driveid->model, - capacity, - (flags & DEVICE_FLAG_DISABLED)? - "Disabled" : "Normal", - devinfo.u.device.read_ahead_enabled? - "[RA]" : "", - devinfo.u.device.write_cache_enabled? - "[WC]" : "", - devinfo.u.device.TCQ_enabled? - "[TCQ]" : "", - devinfo.u.device.NCQ_enabled? - "[NCQ]" : "" - ); - } - break; - } - - case LDT_ARRAY: - if (devinfo.target_id != INVALID_TARGET_ID) - hptiop_copy_info(pinfo, "[DISK %d_%d] ", - devinfo.vbus_id, devinfo.target_id); - - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, "%s (%s), %lluMB, %s\n", - devinfo.u.array.name, - devinfo.u.array.array_type==AT_RAID0? "RAID0" : - devinfo.u.array.array_type==AT_RAID1? "RAID1" : - devinfo.u.array.array_type==AT_RAID5? "RAID5" : - devinfo.u.array.array_type==AT_RAID6? "RAID6" : - devinfo.u.array.array_type==AT_JBOD? "JBOD" : - "unknown", - capacity, - get_array_status(&devinfo)); - for (i = 0; i < devinfo.u.array.ndisk; i++) { - if (hpt_id_valid(devinfo.u.array.members[i])) { - if (cpu_to_le16(1<private_data; - struct hptiop_getinfo info; - int i, j, ndev; - struct hpt_controller_info con_info; - struct hpt_channel_info chan_info; - __le32 ids[32]; - - info.buffer = buf; - info.buflength = count; - info.bufoffset = ppos ? *ppos : 0; - info.filpos = 0; - info.buffillen = 0; - - if (hptiop_get_controller_info(hba, &con_info)) - return -EIO; - - for (i = 0; i < con_info.num_buses; i++) { - if (hptiop_get_channel_info(hba, i, &chan_info) == 0) { - if (hpt_id_valid(chan_info.devices[0])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[0], 0); - if (hpt_id_valid(chan_info.devices[1])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[1], 0); - } - } - - ndev = hptiop_get_logical_devices(hba, ids, - sizeof(ids) / sizeof(ids[0])); - - /* - * if hptiop_get_logical_devices fails, ndev==-1 and it just - * output nothing here - */ - for (j = 0; j < ndev; j++) - hptiop_dump_devinfo(hba, &info, ids[j], 0); - - if (ppos) - *ppos += info.buffillen; - - return info.buffillen; -} - -static int hptiop_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct hptiop_hba *hba = file->private_data; - struct hpt_ioctl_u ioctl_u; - struct hpt_ioctl_k ioctl_k; - u32 bytes_returned; - int err = -EINVAL; - - if (copy_from_user(&ioctl_u, - (void __user *)arg, sizeof(struct hpt_ioctl_u))) - return -EINVAL; - - if (ioctl_u.magic != HPT_IOCTL_MAGIC) - return -EINVAL; - - ioctl_k.ioctl_code = ioctl_u.ioctl_code; - ioctl_k.inbuf = NULL; - ioctl_k.inbuf_size = ioctl_u.inbuf_size; - ioctl_k.outbuf = NULL; - ioctl_k.outbuf_size = ioctl_u.outbuf_size; - ioctl_k.hba = hba; - ioctl_k.bytes_returned = &bytes_returned; - - /* verify user buffer */ - if ((ioctl_k.inbuf_size && !access_ok(VERIFY_READ, - ioctl_u.inbuf, ioctl_k.inbuf_size)) || - (ioctl_k.outbuf_size && !access_ok(VERIFY_WRITE, - ioctl_u.outbuf, ioctl_k.outbuf_size)) || - (ioctl_u.bytes_returned && !access_ok(VERIFY_WRITE, - ioctl_u.bytes_returned, sizeof(u32))) || - ioctl_k.inbuf_size + ioctl_k.outbuf_size > 0x10000) { - - dprintk("scsi%d: got bad user address\n", hba->host->host_no); - return -EINVAL; - } - - /* map buffer to kernel. */ - if (ioctl_k.inbuf_size) { - ioctl_k.inbuf = kmalloc(ioctl_k.inbuf_size, GFP_KERNEL); - if (!ioctl_k.inbuf) { - dprintk("scsi%d: fail to alloc inbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - - if (copy_from_user(ioctl_k.inbuf, - ioctl_u.inbuf, ioctl_k.inbuf_size)) { - goto err_exit; - } - } - - if (ioctl_k.outbuf_size) { - ioctl_k.outbuf = kmalloc(ioctl_k.outbuf_size, GFP_KERNEL); - if (!ioctl_k.outbuf) { - dprintk("scsi%d: fail to alloc outbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - } - - hptiop_do_ioctl(&ioctl_k); - - if (ioctl_k.result == HPT_IOCTL_RESULT_OK) { - if (ioctl_k.outbuf_size && - copy_to_user(ioctl_u.outbuf, - ioctl_k.outbuf, ioctl_k.outbuf_size)) - goto err_exit; - - if (ioctl_u.bytes_returned && - copy_to_user(ioctl_u.bytes_returned, - &bytes_returned, sizeof(u32))) - goto err_exit; - - err = 0; - } - -err_exit: - kfree(ioctl_k.inbuf); - kfree(ioctl_k.outbuf); - - return err; -} - -static int hptiop_cdev_open(struct inode *inode, struct file *file) -{ - struct hptiop_hba *hba; - unsigned i = 0, minor = iminor(inode); - int ret = -ENODEV; - - spin_lock(&hptiop_hba_list_lock); - list_for_each_entry(hba, &hptiop_hba_list, link) { - if (i == minor) { - file->private_data = hba; - ret = 0; - goto out; - } - i++; - } - -out: - spin_unlock(&hptiop_hba_list_lock); - return ret; -} - -static struct file_operations hptiop_cdev_fops = { - .owner = THIS_MODULE, - .read = hptiop_cdev_read, - .ioctl = hptiop_cdev_ioctl, - .open = hptiop_cdev_open, -}; - static ssize_t hptiop_show_fw_version(struct class_device *class_dev, char *buf) { struct Scsi_Host *host = class_to_shost(class_dev); @@ -1296,19 +771,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, goto unmap_pci_bar; } - if (scsi_add_host(host, &pcidev->dev)) { - printk(KERN_ERR "scsi%d: scsi_add_host failed\n", - hba->host->host_no); - goto unmap_pci_bar; - } - pci_set_drvdata(pcidev, host); if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED, driver_name, hba)) { printk(KERN_ERR "scsi%d: request irq %d failed\n", hba->host->host_no, pcidev->irq); - goto remove_scsi_host; + goto unmap_pci_bar; } /* Allocate request mem */ @@ -1355,9 +824,12 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, if (hptiop_initialize_iop(hba)) goto free_request_mem; - spin_lock(&hptiop_hba_list_lock); - list_add_tail(&hba->link, &hptiop_hba_list); - spin_unlock(&hptiop_hba_list_lock); + if (scsi_add_host(host, &pcidev->dev)) { + printk(KERN_ERR "scsi%d: scsi_add_host failed\n", + hba->host->host_no); + goto free_request_mem; + } + scsi_scan_host(host); @@ -1372,9 +844,6 @@ free_request_mem: free_request_irq: free_irq(hba->pcidev->irq, hba); -remove_scsi_host: - scsi_remove_host(host); - unmap_pci_bar: iounmap(hba->iop); @@ -1422,10 +891,6 @@ static void hptiop_remove(struct pci_dev *pcidev) scsi_remove_host(host); - spin_lock(&hptiop_hba_list_lock); - list_del_init(&hba->link); - spin_unlock(&hptiop_hba_list_lock); - hptiop_shutdown(pcidev); free_irq(hba->pcidev->irq, hba); @@ -1462,27 +927,12 @@ static struct pci_driver hptiop_pci_driver = { static int __init hptiop_module_init(void) { - int error; - printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver); - - error = pci_register_driver(&hptiop_pci_driver); - if (error < 0) - return error; - - hptiop_cdev_major = register_chrdev(0, "hptiop", &hptiop_cdev_fops); - if (hptiop_cdev_major < 0) { - printk(KERN_WARNING "unable to register hptiop device.\n"); - return hptiop_cdev_major; - } - - return 0; + return pci_register_driver(&hptiop_pci_driver); } static void __exit hptiop_module_exit(void) { - dprintk("hptiop_module_exit\n"); - unregister_chrdev(hptiop_cdev_major, "hptiop"); pci_unregister_driver(&hptiop_pci_driver); } -- cgit v1.1 From 77d88ee275aeba5da447987f30401bbd4c901ca9 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Mon, 31 Jul 2006 12:19:40 -0500 Subject: [SCSI] mptfc: properly wait for firmware target discovery to complete Based upon a conversation I had with LSI's fibre channel firmware guru, this patch adds another condition under which the driver waits for the firmware link initialization / target discovery to complete. Signed-off-by: Michael Reed Acked-by: Moore, Eric Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 90da7d6..2144554 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -669,7 +669,10 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) * if still doing discovery, * hang loose a while until finished */ - if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if ((pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) || + (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_ONLINE && + (pp0dest->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) + == MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT)) { if (count-- > 0) { msleep(100); goto try_again; -- cgit v1.1 From 3a0c56d801df6785b30e36c19e89d7e971c151da Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Mon, 31 Jul 2006 12:19:50 -0500 Subject: [SCSI] mptfc: correct out of order event processing This patch corrects a problem in mptfc which can result in targets being removed after executing an "lsiutil 99" reset of the fibre channel ports. The last rescan event was being processed before the setup reset work due to an inappropriate optimization in the event processing logic. Every rescan event is now queued for execution and the setup reset work now executes in the proper sequence. Signed-off-by: Michael Reed Acked-by: Moore, Eric Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 1 - drivers/message/fusion/mptfc.c | 87 ++++++++++++++++------------------------ 2 files changed, 34 insertions(+), 54 deletions(-) diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index d4cb144..c537d71 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -640,7 +640,6 @@ typedef struct _MPT_ADAPTER struct work_struct fc_setup_reset_work; struct list_head fc_rports; spinlock_t fc_rescan_work_lock; - int fc_rescan_work_count; struct work_struct fc_rescan_work; char fc_rescan_work_q_name[KOBJ_NAME_LEN]; struct workqueue_struct *fc_rescan_work_q; diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 2144554..85696f3 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -898,59 +898,45 @@ mptfc_rescan_devices(void *arg) { MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; int ii; - int work_to_do; u64 pn; - unsigned long flags; struct mptfc_rport_info *ri; - do { - /* start by tagging all ports as missing */ - list_for_each_entry(ri, &ioc->fc_rports, list) { - if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { - ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING; - } + /* start by tagging all ports as missing */ + list_for_each_entry(ri, &ioc->fc_rports, list) { + if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { + ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING; } + } - /* - * now rescan devices known to adapter, - * will reregister existing rports - */ - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptfc_GetFcPortPage0(ioc, ii); - mptfc_init_host_attr(ioc,ii); /* refresh */ - mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); - } + /* + * now rescan devices known to adapter, + * will reregister existing rports + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) mptfc_GetFcPortPage0(ioc, ii); + mptfc_init_host_attr(ioc, ii); /* refresh */ + mptfc_GetFcDevPage0(ioc, ii, mptfc_register_dev); + } - /* delete devices still missing */ - list_for_each_entry(ri, &ioc->fc_rports, list) { - /* if newly missing, delete it */ - if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) { + /* delete devices still missing */ + list_for_each_entry(ri, &ioc->fc_rports, list) { + /* if newly missing, delete it */ + if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) { - ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED| - MPT_RPORT_INFO_FLAGS_MISSING); - fc_remote_port_delete(ri->rport); /* won't sleep */ - ri->rport = NULL; + ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED| + MPT_RPORT_INFO_FLAGS_MISSING); + fc_remote_port_delete(ri->rport); /* won't sleep */ + ri->rport = NULL; - pn = (u64)ri->pg0.WWPN.High << 32 | - (u64)ri->pg0.WWPN.Low; - dfcprintk ((MYIOC_s_INFO_FMT - "mptfc_rescan.%d: %llx deleted\n", - ioc->name, - ioc->sh->host_no, - (unsigned long long)pn)); - } + pn = (u64)ri->pg0.WWPN.High << 32 | + (u64)ri->pg0.WWPN.Low; + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_rescan.%d: %llx deleted\n", + ioc->name, + ioc->sh->host_no, + (unsigned long long)pn)); } - - /* - * allow multiple passes as target state - * might have changed during scan - */ - spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); - if (ioc->fc_rescan_work_count > 2) /* only need one more */ - ioc->fc_rescan_work_count = 2; - work_to_do = --ioc->fc_rescan_work_count; - spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); - } while (work_to_do); + } } static int @@ -1162,7 +1148,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) * by doing it via the workqueue, some locking is eliminated */ - ioc->fc_rescan_work_count = 1; queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work); flush_workqueue(ioc->fc_rescan_work_q); @@ -1205,10 +1190,8 @@ mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) case MPI_EVENT_RESCAN: spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); } spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); break; @@ -1251,10 +1234,8 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) mptfc_SetFcPortPage1_defaults(ioc); spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); if (ioc->fc_rescan_work_q) { - if (ioc->fc_rescan_work_count++ == 0) { - queue_work(ioc->fc_rescan_work_q, - &ioc->fc_rescan_work); - } + queue_work(ioc->fc_rescan_work_q, + &ioc->fc_rescan_work); } spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); } -- cgit v1.1 From 33ccf8d1080bdccb4751a92f6da361a6e01b7cc0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:57:58 -0400 Subject: [SCSI] lpfc 8.1.9 : Misc Bug Fixes Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 15 ++++++++++++--- drivers/scsi/lpfc/lpfc_hbadisc.c | 3 +++ drivers/scsi/lpfc/lpfc_init.c | 1 + drivers/scsi/lpfc/lpfc_nportdisc.c | 22 +++++++++++++++++++++- 5 files changed, 38 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 76f8bd5..d384c16 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -222,7 +222,7 @@ lpfc_issue_lip(struct Scsi_Host *host) pmboxq->mb.mbxCommand = MBX_DOWN_LINK; pmboxq->mb.mbxOwner = OWN_HOST; - mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) { memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 60f5cca..3567de6 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1848,9 +1848,12 @@ static void lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_iocbq * rspiocb) { + IOCB_t *irsp; struct lpfc_nodelist *ndlp; LPFC_MBOXQ_t *mbox = NULL; + irsp = &rspiocb->iocb; + ndlp = (struct lpfc_nodelist *) cmdiocb->context1; if (cmdiocb->context_un.mbox) mbox = cmdiocb->context_un.mbox; @@ -1893,9 +1896,15 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, mempool_free( mbox, phba->mbox_mem_pool); } else { mempool_free( mbox, phba->mbox_mem_pool); - if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { - lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); - ndlp = NULL; + /* Do not call NO_LIST for lpfc_els_abort'ed ELS cmds */ + if (!((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && + ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || + (irsp->un.ulpWord[4] == IOERR_SLI_DOWN)))) { + if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); + ndlp = NULL; + } } } } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 1c3f268..b2f1552 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1557,6 +1557,8 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; } } + + spin_lock_irq(phba->host->host_lock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { @@ -1569,6 +1571,7 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mempool_free(mb, phba->mbox_mem_pool); } } + spin_unlock_irq(phba->host->host_lock); lpfc_els_abort(phba,ndlp,0); spin_lock_irq(phba->host->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 16dc8c8..f6948ff 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1379,6 +1379,7 @@ lpfc_offline(struct lpfc_hba * phba) /* stop all timers associated with this hba */ lpfc_stop_timer(phba); phba->work_hba_events = 0; + phba->work_ha = 0; lpfc_printf_log(phba, KERN_WARNING, diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index b38021a..20449a8 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -393,6 +393,20 @@ lpfc_rcv_plogi(struct lpfc_hba * phba, mbox->context2 = ndlp; ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI); + /* + * If there is an outstanding PLOGI issued, abort it before + * sending ACC rsp for received PLOGI. If pending plogi + * is not canceled here, the plogi will be rejected by + * remote port and will be retried. On a configuration with + * single discovery thread, this will cause a huge delay in + * discovery. Also this will cause multiple state machines + * running in parallel for this node. + */ + if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) { + /* software abort outstanding PLOGI */ + lpfc_els_abort(phba, ndlp, 1); + } + lpfc_els_rsp_acc(phba, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox, 0); return 1; @@ -1601,7 +1615,13 @@ lpfc_rcv_padisc_npr_node(struct lpfc_hba * phba, lpfc_rcv_padisc(phba, ndlp, cmdiocb); - if (!(ndlp->nlp_flag & NLP_DELAY_TMO)) { + /* + * Do not start discovery if discovery is about to start + * or discovery in progress for this node. Starting discovery + * here will affect the counting of discovery threads. + */ + if ((!(ndlp->nlp_flag & NLP_DELAY_TMO)) && + (ndlp->nlp_flag & NLP_NPR_2B_DISC)){ if (ndlp->nlp_flag & NLP_NPR_ADISC) { ndlp->nlp_prev_state = NLP_STE_NPR_NODE; ndlp->nlp_state = NLP_STE_ADISC_ISSUE; -- cgit v1.1 From a90f56847e8df9034c1c05d1157e1b0cd96987fb Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:58:04 -0400 Subject: [SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport blocked Stall error handler if attempting resets/aborts while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Background: Although the transport is using the scsi_timed_out functionality to restart the timeout if the rport is blocked, if the timeout has already fired before the block occurs, the eh handler still runs and can take the device offline. Ultimately, this window cannot be resolved without significant work in the error handler thread. Christoph noted the first level of these issues when he noted the poor error response handling by the error thread. We found, under heavy load and error testing, that time window from when the scsi_times_out() adds the io to the queue to when the scsi_error_handler gets around to servicing it, can be in the several seconds range. In most cases, these test conditions are highly unusual, but possible. As a result, we're stalling the error handler in this race window so that we can avoid the device_offline transitions. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0811c82..a8816a8 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -841,6 +842,21 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; } +static void +lpfc_block_error_handler(struct scsi_cmnd *cmnd) +{ + struct Scsi_Host *shost = cmnd->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); + + spin_lock_irq(shost->host_lock); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irq(shost->host_lock); + msleep(1000); + spin_lock_irq(shost->host_lock); + } + spin_unlock_irq(shost->host_lock); + return; +} static int lpfc_abort_handler(struct scsi_cmnd *cmnd) @@ -855,6 +871,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) unsigned int loop_count = 0; int ret = SUCCESS; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; @@ -957,6 +974,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) int ret = FAILED; int cnt, loopcnt; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); /* * If target is not in a MAPPED state, delay the reset until @@ -1073,6 +1091,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) int cnt, loopcnt; struct lpfc_scsi_buf * lpfc_cmd; + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = lpfc_get_scsi_buf(phba); -- cgit v1.1 From 48e2691f9c3bd6719e773f0b883449f4cef39585 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 17 Aug 2006 11:58:11 -0400 Subject: [SCSI] lpfc 8.1.9 : Change version number to 8.1.9 Change version number to 8.1.9 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index c7963f9..c7091ea 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.8" +#define LPFC_DRIVER_VERSION "8.1.9" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.1 From b2155d0417df9f2b4c0d396b6530b864d9f08623 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sat, 19 Aug 2006 00:11:34 -0400 Subject: [SCSI] sg: fix incorrect page problem There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 65eef33..34f9343e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -18,8 +18,8 @@ * */ -static int sg_version_num = 30533; /* 2 digits for each component */ -#define SG_VERSION_STR "3.5.33" +static int sg_version_num = 30534; /* 2 digits for each component */ +#define SG_VERSION_STR "3.5.34" /* * D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes: @@ -60,7 +60,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */ #ifdef CONFIG_SCSI_PROC_FS #include -static char *sg_version_date = "20050908"; +static char *sg_version_date = "20060818"; static int sg_proc_init(void); static void sg_proc_cleanup(void); @@ -1164,7 +1164,7 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) len = vma->vm_end - sa; len = (len < sg->length) ? len : sg->length; if (offset < len) { - page = sg->page; + page = virt_to_page(page_address(sg->page) + offset); get_page(page); /* increment page count */ break; } -- cgit v1.1 From 9c06938aa458843fb71fa35371f23a3b89317252 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:54 -0700 Subject: [SCSI] qla2xxx: Correct PLOGI retry logic. Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1e2b95b..65cbe2f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2238,9 +2238,6 @@ qla2x00_do_dpc(void *data) next_loopid = 0; list_for_each_entry(fcport, &ha->fcports, list) { - if (fcport->port_type != FCT_TARGET) - continue; - /* * If the port is not ONLINE then try to login * to it if we haven't run out of retries. -- cgit v1.1 From 476e8978d9ccacfc911bd42e083dd784ad1465b1 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:55 -0700 Subject: [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort. Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9758dba..8596491 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3063,6 +3063,7 @@ qla2x00_update_fcports(scsi_qla_host_t *ha) int qla2x00_abort_isp(scsi_qla_host_t *ha) { + int rval; unsigned long flags = 0; uint16_t cnt; srb_t *sp; @@ -3119,6 +3120,16 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); + + if (ha->eft) { + rval = qla2x00_trace_control(ha, TC_ENABLE, + ha->eft_dma, EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize EFT " + "(%d).\n", rval); + } + } } else { /* failed the ISP abort */ ha->flags.online = 1; if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) { -- cgit v1.1 From 15a3758dc9e1c9d862e46acdf607de70c302fa6a Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 23 Aug 2006 14:54:56 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.01.07-k1. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index f5826bf..9712590 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,9 +7,9 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.05-k4" +#define QLA2XXX_VERSION "8.01.07-k1" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 -#define QLA_DRIVER_PATCH_VER 5 +#define QLA_DRIVER_PATCH_VER 7 #define QLA_DRIVER_BETA_VER 0 -- cgit v1.1 From 0db99e3359234be181590463184b9959059a9ea9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sat, 26 Aug 2006 03:00:22 -0400 Subject: [SCSI] fix scsi_send_eh_cmnd regression The callers of scsi_send_eh_cmnd are setting the cmnd buffer, and then scsi_send_eh_cmnd is copying that updated buffer to the old_cmnd variable. Then after the command runs, we end up copying that old_cmnd var which has the new cmnd to the scsi command buffer. When this command gets recent, all types of fun things happen like getting TUR or START_STOP commands with data and scatterlists. This patch made against scsi-rc-fixes, has the callers of scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd can do the right thing. This should go into 2.6.18 since this fixes a regression added when we removed some of the scsi_cmnd fields and replaced them with local variables. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 6a5b731..a8ed5a2 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -460,7 +460,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) * Return value: * SUCCESS or FAILED or NEEDS_RETRY **/ -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense) +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, + int cmnd_size, int timeout, int copy_sense) { struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; @@ -490,6 +491,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense old_cmd_len = scmd->cmd_len; old_use_sg = scmd->use_sg; + memset(scmd->cmnd, 0, sizeof(scmd->cmnd)); + memcpy(scmd->cmnd, cmnd, cmnd_size); + if (copy_sense) { int gfp_mask = GFP_ATOMIC; @@ -610,8 +614,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) static unsigned char generic_sense[6] = {REQUEST_SENSE, 0, 0, 0, 252, 0}; - memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense)); - return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1); + return scsi_send_eh_cmnd(scmd, generic_sense, 6, SENSE_TIMEOUT, 1); } /** @@ -736,10 +739,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd) int retry_cnt = 1, rtn; retry_tur: - memcpy(scmd->cmnd, tur_command, sizeof(tur_command)); - - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0); + rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0); SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", __FUNCTION__, scmd, rtn)); @@ -839,8 +839,8 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) if (scmd->device->allow_restart) { int rtn; - memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, + START_UNIT_TIMEOUT, 0); if (rtn == SUCCESS) return 0; } -- cgit v1.1