From fbd59a8d1f7cf325fdb6828659f1fb76631e87b3 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 10 Jan 2009 21:58:08 -0800 Subject: cpumask: Use topology_core_cpumask()/topology_thread_cpumask() Impact: reduce stack usage, use new cpumask API. This actually uses topology_core_cpumask() and topology_thread_cpumask(), removing the only users of topology_core_siblings() and topology_thread_siblings() Signed-off-by: Rusty Russell Signed-off-by: Mike Travis Cc: linux-net-drivers@solarflare.com --- Documentation/cputopology.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 45932ec..b41f3e5 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) -#define topology_thread_siblings(cpu) -#define topology_core_siblings(cpu) +#define topology_thread_cpumask(cpu) +#define topology_core_cpumask(cpu) The type of **_id is int. -The type of siblings is cpumask_t. +The type of siblings is (const) struct cpumask *. To be consistent on all architectures, include/linux/topology.h provides default definitions for any of the above macros that are -- cgit v1.1 From ee287587dafd77fd211e50637561224605c214b4 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 14 Jan 2009 16:07:38 -0800 Subject: bzip2/lzma: update boot protocol specification Impact: documentation Update the boot protocol specification to include the currently supported file formats and their magic numbers. Signed-off-by: H. Peter Anvin --- Documentation/x86/boot.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index fcdc62b..9ac70ff 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -542,7 +542,10 @@ Protocol: 2.08+ The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. + numbers. The currently supported compression formats are gzip + (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA + (magic number 5D 00). The uncompressed payload is currently always ELF + (magic number 7F 45 4C 46). Field name: payload_length Type: read -- cgit v1.1 From e56d0cfe7790fd3218ae4f6aae1335547fea8763 Mon Sep 17 00:00:00 2001 From: Baodong Chen Date: Thu, 8 Jan 2009 19:24:29 +0800 Subject: Documentation/x86/boot.txt: modify fieldname Modify field names to the right ones: - start_sys was changed to start_sys_seg - iinitrd_addr_max was changed to ramdisk_max - pad2 was changed to pad2 and pad3 - readmode_swtch was changed to realmode_swtch Signed-off-by: Baodong Chen <[email]chenbdchenbd@gmail.com[email]> Acked-by: Jiri Kosina Signed-off-by: Ingo Molnar --- Documentation/x86/boot.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7b4596a..1229969 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -158,7 +158,7 @@ Offset Proto Name Meaning 0202/4 2.00+ header Magic signature "HdrS" 0206/2 2.00+ version Boot protocol version supported 0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) +020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete) 020E/2 2.00+ kernel_version Pointer to kernel version string 0210/1 2.00+ type_of_loader Boot loader identifier 0211/1 2.00+ loadflags Boot protocol option flags @@ -170,10 +170,11 @@ Offset Proto Name Meaning 0224/2 2.01+ heap_end_ptr Free memory after setup end 0226/2 N/A pad1 Unused 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ initrd_addr_max Highest legal initrd address +022C/4 2.03+ ramdisk_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/3 N/A pad2 Unused +0235/1 N/A pad2 Unused +0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -299,14 +300,14 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. -Field name: readmode_swtch +Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 Protocol: 2.00+ Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) -Field name: start_sys +Field name: start_sys_seg Type: read Offset/size: 0x20c/2 Protocol: 2.00+ @@ -468,7 +469,7 @@ Protocol: 2.02+ zero, the kernel will assume that your boot loader does not support the 2.02+ protocol. -Field name: initrd_addr_max +Field name: ramdisk_max Type: read Offset/size: 0x22c/4 Protocol: 2.03+ -- cgit v1.1 From 9e5f6cf5f755ca5c52071c317421fae19966a658 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 25 Feb 2009 11:30:45 +0100 Subject: x86: update description for memtest boot parameter Signed-off-by: Andreas Herrmann Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f6d5d5b..10c4b8b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1308,8 +1308,13 @@ and is between 256 and 4096 characters. It is defined in the file memtest= [KNL,X86] Enable memtest Format: - range: 0,4 : pattern number default : 0 + Specifies the number of memtest passes to be + performed. Each pass selects another test + pattern from a given set of patterns. Memtest + fills the memory with this pattern, validates + memory contents and reserves bad memory + regions that are detected. meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. -- cgit v1.1 From a1aade478862fca8710904532cbc6efed97fd05a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 4 Mar 2009 16:11:35 -0800 Subject: x86/doc: mini-howto for using earlyprintk=dbgp [ mingo: small edits and extensions. ] Signed-off-by: Yinghai Lu Cc: "Eric W. Biederman" Cc: Greg KH Cc: Randy Dunlap Cc: Alan Stern Cc: Sarah Sharp Cc: Andrew Morton LKML-Reference: <49AF18B7.4050305@kernel.org> Signed-off-by: Ingo Molnar --- Documentation/x86/earlyprintk.txt | 101 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/x86/earlyprintk.txt (limited to 'Documentation') diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt new file mode 100644 index 0000000..607b1a0 --- /dev/null +++ b/Documentation/x86/earlyprintk.txt @@ -0,0 +1,101 @@ + +Mini-HOWTO for using the earlyprintk=dbgp boot option with a +USB2 Debug port key and a debug cable, on x86 systems. + +You need two computers, the 'USB debug key' special gadget and +and two USB cables, connected like this: + + [host/target] <-------> [USB debug key] <-------> [client/console] + +1. There are three specific hardware requirements: + + a.) Host/target system needs to have USB debug port capability. + + You can check this capability by looking at a 'Debug port' bit in + the lspci -vvv output: + + # lspci -vvv + ... + 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) + Subsystem: Lenovo ThinkPad T61 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- /proc/sysrq-trigger + + On the host/target system you should see this help line in "dmesg" output: + + SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) + + On the client/console system do: + + cat /dev/ttyUSB0 + + And you should see the help line above displayed shortly after you've + provoked it on the host system. + +If it does not work then please ask about it on the linux-kernel@vger.kernel.org +mailing list or contact the x86 maintainers. -- cgit v1.1