From 6084f1bf0c51a99cbba612ee90a4607cffb8b042 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 24 Nov 2008 12:00:01 -0800 Subject: USB: otg: gpio_vbus transceiver stub gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by: Philipp Zabel Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/gpio_vbus.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 include/linux/usb/gpio_vbus.h (limited to 'include/linux') diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h new file mode 100644 index 0000000..d9f03cc --- /dev/null +++ b/include/linux/usb/gpio_vbus.h @@ -0,0 +1,30 @@ +/* + * A simple GPIO VBUS sensing driver for B peripheral only devices + * with internal transceivers. + * Optionally D+ pullup can be controlled by a second GPIO. + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/** + * struct gpio_vbus_mach_info - configuration for gpio_vbus + * @gpio_vbus: VBUS sensing GPIO + * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) + * @gpio_vbus_inverted: true if gpio_vbus is active low + * @gpio_pullup_inverted: true if gpio_pullup is active low + * + * The VBUS sensing GPIO should have a pulldown, which will normally be + * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a + * value the GPIO detects as active. Some systems will use comparators. + */ +struct gpio_vbus_mach_info { + int gpio_vbus; + int gpio_pullup; + bool gpio_vbus_inverted; + bool gpio_pullup_inverted; +}; -- cgit v1.1