From 44ee63587dce85593c22497140db16f4e5027860 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Feb 2010 10:50:50 +0900 Subject: percpu: Add __percpu sparse annotations to hw_breakpoint Add __percpu sparse annotations to hw_breakpoint. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. In kernel/hw_breakpoint.c, per_cpu(nr_task_bp_pinned, cpu)'s will trigger spurious noderef related warnings from sparse. Changing it to &per_cpu(nr_task_bp_pinned[0], cpu) will work around the problem but deemed to ugly by the maintainer. Leave it alone until better solution can be found. Signed-off-by: Tejun Heo Cc: Stephen Rothwell Cc: K.Prasad LKML-Reference: <4B7B4B7A.9050902@kernel.org> Signed-off-by: Frederic Weisbecker --- include/linux/hw_breakpoint.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 5977b72..c70d27a 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -66,14 +66,14 @@ register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr, perf_overflow_handler_t triggered, int cpu); -extern struct perf_event ** +extern struct perf_event * __percpu * register_wide_hw_breakpoint(struct perf_event_attr *attr, perf_overflow_handler_t triggered); extern int register_perf_hw_breakpoint(struct perf_event *bp); extern int __register_perf_hw_breakpoint(struct perf_event *bp); extern void unregister_hw_breakpoint(struct perf_event *bp); -extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events); +extern void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events); extern int dbg_reserve_bp_slot(struct perf_event *bp); extern int dbg_release_bp_slot(struct perf_event *bp); @@ -100,7 +100,7 @@ static inline struct perf_event * register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr, perf_overflow_handler_t triggered, int cpu) { return NULL; } -static inline struct perf_event ** +static inline struct perf_event * __percpu * register_wide_hw_breakpoint(struct perf_event_attr *attr, perf_overflow_handler_t triggered) { return NULL; } static inline int @@ -109,7 +109,7 @@ static inline int __register_perf_hw_breakpoint(struct perf_event *bp) { return -ENOSYS; } static inline void unregister_hw_breakpoint(struct perf_event *bp) { } static inline void -unregister_wide_hw_breakpoint(struct perf_event **cpu_events) { } +unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events) { } static inline int reserve_bp_slot(struct perf_event *bp) {return -ENOSYS; } static inline void release_bp_slot(struct perf_event *bp) { } -- cgit v1.1 From dd8b1cf681eab40bc5afb67bdd06b2ca341f5669 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 27 Feb 2010 17:10:39 +0100 Subject: perf: Remove pointless breakpoint union Remove pointless union in the breakpoint field of hw_perf_event. Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Paul Mackerras --- include/linux/perf_event.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 7b18b4f..04f06b4 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -487,9 +487,8 @@ struct hw_perf_event { struct hrtimer hrtimer; }; #ifdef CONFIG_HAVE_HW_BREAKPOINT - union { /* breakpoint */ - struct arch_hw_breakpoint info; - }; + /* breakpoint */ + struct arch_hw_breakpoint info; #endif }; atomic64_t prev_count; -- cgit v1.1 From 1883c79a57a5fe25309007590cccb1b2782c41b2 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 27 Feb 2010 14:53:08 -0800 Subject: rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use It is apparently legal to invoke task_subsys_state() without RCU protection during early boot time. After all, there are no concurrent tasks, so there can be no grace periods completing concurrently. But this does need an Acked-by from the cgroups folks. Located-by: Ingo Molnar Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267311188-16603-2-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/cgroup.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index c9bbcb2..a73e1ce 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -489,6 +489,7 @@ static inline struct cgroup_subsys_state *task_subsys_state( { return rcu_dereference_check(task->cgroups->subsys[subsys_id], rcu_read_lock_held() || + !rcu_scheduler_active || cgroup_lock_is_held()); } -- cgit v1.1 From 320ebf09cbb6d01954c9a060266aa8e0d27f4638 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 2 Mar 2010 12:35:37 +0100 Subject: perf, x86: Restrict the ANY flag The ANY flag can show SMT data of another task (like 'top'), so we want to disable it when system-wide profiling is disabled. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 04f06b4..90e0521 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -857,6 +857,21 @@ extern int sysctl_perf_event_paranoid; extern int sysctl_perf_event_mlock; extern int sysctl_perf_event_sample_rate; +static inline bool perf_paranoid_tracepoint_raw(void) +{ + return sysctl_perf_event_paranoid > -1; +} + +static inline bool perf_paranoid_cpu(void) +{ + return sysctl_perf_event_paranoid > 0; +} + +static inline bool perf_paranoid_kernel(void) +{ + return sysctl_perf_event_paranoid > 1; +} + extern void perf_event_init(void); extern void perf_tp_event(int event_id, u64 addr, u64 count, void *record, int entry_size); extern void perf_bp_event(struct perf_event *event, void *data); -- cgit v1.1 From 3082a2b7b1af1b1508c1c3fa589566064f926f40 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 16 Feb 2010 16:36:25 -0500 Subject: rfkill: Add support for KEY_RFKILL Add support for handling KEY_RFKILL in the rfkill input module. This simply toggles the state of all rfkill devices. The comment in rfkill.h is also updated to reflect that RFKILL_TYPE_ALL may be used inside the kernel. Signed-off-by: Matthew Garrett Acked-by: Marcel Holtmann Signed-off-by: John W. Linville --- include/linux/rfkill.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 97059d0..4f82326 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -29,7 +29,7 @@ /** * enum rfkill_type - type of rfkill switch. * - * @RFKILL_TYPE_ALL: toggles all switches (userspace only) + * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. -- cgit v1.1 From 87c1e12b5eeb7b30b4b41291bef8e0b41fc3dde9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 2 Mar 2010 02:51:56 +0000 Subject: ipsec: Fix bogus bundle flowi When I merged the bundle creation code, I introduced a bogus flowi value in the bundle. Instead of getting from the caller, it was instead set to the flow in the route object, which is totally different. The end result is that the bundles we created never match, and we instead end up with an ever growing bundle list. Thanks to Jamal for find this problem. Reported-by: Jamal Hadi Salim Signed-off-by: Herbert Xu Acked-by: Steffen Klassert Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- include/net/xfrm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/xfrm.h b/include/net/xfrm.h index a7df327..d74e080 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -275,7 +275,8 @@ struct xfrm_policy_afinfo { struct dst_entry *dst, int nfheader_len); int (*fill_dst)(struct xfrm_dst *xdst, - struct net_device *dev); + struct net_device *dev, + struct flowi *fl); }; extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo); -- cgit v1.1 From 4fa004373133ece3d9b1c0a7e243b0e53760b165 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 1 Mar 2010 14:42:57 +0530 Subject: mac80211: Fix HT rate control configuration Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith Signed-off-by: John W. Linville --- include/net/mac80211.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 80eb7cc..45d7d44 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2426,7 +2426,8 @@ struct rate_control_ops { struct ieee80211_sta *sta, void *priv_sta); void (*rate_update)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, - void *priv_sta, u32 changed); + void *priv_sta, u32 changed, + enum nl80211_channel_type oper_chan_type); void (*free_sta)(void *priv, struct ieee80211_sta *sta, void *priv_sta); -- cgit v1.1 From c839d30a41dd92eb32d7fcfa2b4e99042fc64bf2 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Wed, 3 Mar 2010 04:46:50 +0000 Subject: net: add scheduler sync hint to tcp_prequeue(). Decreases the odds wakee will suffer from frequent cache misses. Signed-off-by: Mike Galbraith Signed-off-by: David S. Miller --- include/net/tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/tcp.h b/include/net/tcp.h index 56f0aec..75be5a2 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -939,7 +939,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) tp->ucopy.memory = 0; } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) { - wake_up_interruptible_poll(sk->sk_sleep, + wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN | POLLRDNORM | POLLRDBAND); if (!inet_csk_ack_scheduled(sk)) inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, -- cgit v1.1 From db1466b3e1bd1727375cdbfcbea4bcce2f860f61 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 3 Mar 2010 07:46:56 -0800 Subject: rcu: Use wrapper function instead of exporting tasklist_lock Lockdep-RCU commit d11c563d exported tasklist_lock, which is not a good thing. This patch instead exports a function that uses lockdep to check whether tasklist_lock is held. Suggested-by: Christoph Hellwig Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: Christoph Hellwig LKML-Reference: <1267631219-8713-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/cred.h | 2 +- include/linux/sched.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/cred.h b/include/linux/cred.h index 4db09f8..52507c3 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -280,7 +280,7 @@ static inline void put_cred(const struct cred *_cred) * task or by holding tasklist_lock to prevent it from being unlinked. */ #define __task_cred(task) \ - ((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_is_held(&tasklist_lock)))) + ((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_tasklist_lock_is_held()))) /** * get_task_cred - Get another task's objective credentials diff --git a/include/linux/sched.h b/include/linux/sched.h index 0eef87b..a47af20 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -258,6 +258,10 @@ extern spinlock_t mmlist_lock; struct task_struct; +#ifdef CONFIG_PROVE_RCU +extern int lockdep_tasklist_lock_is_held(void); +#endif /* #ifdef CONFIG_PROVE_RCU */ + extern void sched_init(void); extern void sched_init_smp(void); extern asmlinkage void schedule_tail(struct task_struct *prev); -- cgit v1.1 From 5ed42b8113667c06a6ff2c72717395b5044d30a1 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 3 Mar 2010 07:46:58 -0800 Subject: rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU This patch removes the check for !rcu_scheduler_active because this check has been incorporated into rcu_dereference_check(). Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267631219-8713-3-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/cgroup.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index a73e1ce..c9bbcb2 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -489,7 +489,6 @@ static inline struct cgroup_subsys_state *task_subsys_state( { return rcu_dereference_check(task->cgroups->subsys[subsys_id], rcu_read_lock_held() || - !rcu_scheduler_active || cgroup_lock_is_held()); } -- cgit v1.1 From e6033e3b307fcfae08408e0673266db38392bda4 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 3 Mar 2010 17:50:16 -0800 Subject: rcu: Make rcu_read_lock_sched_held() handle !PREEMPT The rcu_read_lock_sched_held() needs to unconditionally return the value "1" in a !PREEMPT kernel, because under !PREEMPT, -all- kernel code is implicitly preempt-disabled. This patch makes this happen. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267667418-32233-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index c843736..e22960ec 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -136,6 +136,7 @@ static inline int rcu_read_lock_bh_held(void) * can prove otherwise. Note that disabling of preemption (including * disabling irqs) counts as an RCU-sched read-side critical section. */ +#ifdef CONFIG_PREEMPT static inline int rcu_read_lock_sched_held(void) { int lockdep_opinion = 0; @@ -144,6 +145,12 @@ static inline int rcu_read_lock_sched_held(void) lockdep_opinion = lock_is_held(&rcu_sched_lock_map); return lockdep_opinion || preempt_count() != 0 || !rcu_scheduler_active; } +#else /* #ifdef CONFIG_PREEMPT */ +static inline int rcu_read_lock_sched_held(void) +{ + return 1; +} +#endif /* #else #ifdef CONFIG_PREEMPT */ #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ @@ -164,10 +171,17 @@ static inline int rcu_read_lock_bh_held(void) return 1; } +#ifdef CONFIG_PREEMPT static inline int rcu_read_lock_sched_held(void) { return preempt_count() != 0 || !rcu_scheduler_active; } +#else /* #ifdef CONFIG_PREEMPT */ +static inline int rcu_read_lock_sched_held(void) +{ + return 1; +} +#endif /* #else #ifdef CONFIG_PREEMPT */ #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ -- cgit v1.1 From 8d53dd546f36073e0d29b0cfc24c665db301e3e7 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 3 Mar 2010 17:50:18 -0800 Subject: rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare() Change the pair of rcu_dereference() calls in ftrace_perf_buf_prepare() to rcu_dereference_sched(). Signed-off-by: Paul E. McKenney Acked-by: Frederic Weisbecker Cc: Steven Rostedt Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: Frederic Weisbecker LKML-Reference: <1267667418-32233-3-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/trace/ftrace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 0804cd5..601ad77 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -699,9 +699,9 @@ __attribute__((section("_ftrace_events"))) event_##call = { \ * __cpu = smp_processor_id(); * * if (in_nmi()) - * trace_buf = rcu_dereference(perf_trace_buf_nmi); + * trace_buf = rcu_dereference_sched(perf_trace_buf_nmi); * else - * trace_buf = rcu_dereference(perf_trace_buf); + * trace_buf = rcu_dereference_sched(perf_trace_buf); * * if (!trace_buf) * goto end; -- cgit v1.1 From 54dbf96c921513bf98484a20ef366d51944a4c4d Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 3 Mar 2010 07:46:57 -0800 Subject: rcu: Suppress RCU lockdep warnings during early boot RCU is used during very early boot, before RCU and lockdep have been initialized. So make the underlying primitives (rcu_read_lock_held(), rcu_read_lock_bh_held(), rcu_read_lock_sched_held(), and rcu_dereference_check()) check for early boot via the rcu_scheduler_active flag. This will suppress false positives. Also introduce a debug_lockdep_rcu_enabled() static inline helper function, which tags the CONTINUE_PROVE_RCU case as likely(), as suggested by Ingo Molnar. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267631219-8713-2-git-send-email-paulmck@linux.vnet.ibm.com> [ v2: removed incomplete debug_lockdep_rcu_update() bits ] Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index e22960ec..75921b8 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -97,6 +97,11 @@ extern struct lockdep_map rcu_sched_lock_map; # define rcu_read_release_sched() \ lock_release(&rcu_sched_lock_map, 1, _THIS_IP_) +static inline int debug_lockdep_rcu_enabled(void) +{ + return likely(rcu_scheduler_active && debug_locks); +} + /** * rcu_read_lock_held - might we be in RCU read-side critical section? * @@ -104,12 +109,14 @@ extern struct lockdep_map rcu_sched_lock_map; * an RCU read-side critical section. In absence of CONFIG_PROVE_LOCKING, * this assumes we are in an RCU read-side critical section unless it can * prove otherwise. + * + * Check rcu_scheduler_active to prevent false positives during boot. */ static inline int rcu_read_lock_held(void) { - if (debug_locks) - return lock_is_held(&rcu_lock_map); - return 1; + if (!debug_lockdep_rcu_enabled()) + return 1; + return lock_is_held(&rcu_lock_map); } /** @@ -119,12 +126,14 @@ static inline int rcu_read_lock_held(void) * an RCU-bh read-side critical section. In absence of CONFIG_PROVE_LOCKING, * this assumes we are in an RCU-bh read-side critical section unless it can * prove otherwise. + * + * Check rcu_scheduler_active to prevent false positives during boot. */ static inline int rcu_read_lock_bh_held(void) { - if (debug_locks) - return lock_is_held(&rcu_bh_lock_map); - return 1; + if (!debug_lockdep_rcu_enabled()) + return 1; + return lock_is_held(&rcu_bh_lock_map); } /** @@ -135,15 +144,19 @@ static inline int rcu_read_lock_bh_held(void) * this assumes we are in an RCU-sched read-side critical section unless it * can prove otherwise. Note that disabling of preemption (including * disabling irqs) counts as an RCU-sched read-side critical section. + * + * Check rcu_scheduler_active to prevent false positives during boot. */ #ifdef CONFIG_PREEMPT static inline int rcu_read_lock_sched_held(void) { int lockdep_opinion = 0; + if (!debug_lockdep_rcu_enabled()) + return 1; if (debug_locks) lockdep_opinion = lock_is_held(&rcu_sched_lock_map); - return lockdep_opinion || preempt_count() != 0 || !rcu_scheduler_active; + return lockdep_opinion || preempt_count() != 0; } #else /* #ifdef CONFIG_PREEMPT */ static inline int rcu_read_lock_sched_held(void) @@ -174,7 +187,7 @@ static inline int rcu_read_lock_bh_held(void) #ifdef CONFIG_PREEMPT static inline int rcu_read_lock_sched_held(void) { - return preempt_count() != 0 || !rcu_scheduler_active; + return !rcu_scheduler_active || preempt_count() != 0; } #else /* #ifdef CONFIG_PREEMPT */ static inline int rcu_read_lock_sched_held(void) @@ -198,7 +211,7 @@ static inline int rcu_read_lock_sched_held(void) */ #define rcu_dereference_check(p, c) \ ({ \ - if (debug_locks && !(c)) \ + if (debug_lockdep_rcu_enabled() && !(c)) \ lockdep_rcu_dereference(__FILE__, __LINE__); \ rcu_dereference_raw(p); \ }) -- cgit v1.1 From 8eae939f1400326b06d0c9afe53d2a484a326871 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 4 Mar 2010 18:01:40 +0000 Subject: net: add limit for socket backlog We got system OOM while running some UDP netperf testing on the loopback device. The case is multiple senders sent stream UDP packets to a single receiver via loopback on local host. Of course, the receiver is not able to handle all the packets in time. But we surprisingly found that these packets were not discarded due to the receiver's sk->sk_rcvbuf limit. Instead, they are kept queuing to sk->sk_backlog and finally ate up all the memory. We believe this is a secure hole that a none privileged user can crash the system. The root cause for this problem is, when the receiver is doing __release_sock() (i.e. after userspace recv, kernel udp_recvmsg -> skb_free_datagram_locked -> release_sock), it moves skbs from backlog to sk_receive_queue with the softirq enabled. In the above case, multiple busy senders will almost make it an endless loop. The skbs in the backlog end up eat all the system memory. The issue is not only for UDP. Any protocols using socket backlog is potentially affected. The patch adds limit for socket backlog so that the backlog size cannot be expanded endlessly. Reported-by: Alex Shi Cc: David Miller Cc: Arnaldo Carvalho de Melo Cc: Alexey Kuznetsov Cc: Patrick McHardy Cc: Vlad Yasevich Cc: Sridhar Samudrala Cc: Jon Maloy Cc: Allan Stephens Cc: Andrew Hendry Signed-off-by: Zhu Yi Signed-off-by: Eric Dumazet Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- include/net/sock.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 6cb1676..2516d76 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -253,6 +253,8 @@ struct sock { struct { struct sk_buff *head; struct sk_buff *tail; + int len; + int limit; } sk_backlog; wait_queue_head_t *sk_sleep; struct dst_entry *sk_dst_cache; @@ -589,7 +591,7 @@ static inline int sk_stream_memory_free(struct sock *sk) return sk->sk_wmem_queued < sk->sk_sndbuf; } -/* The per-socket spinlock must be held here. */ +/* OOB backlog add */ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb) { if (!sk->sk_backlog.tail) { @@ -601,6 +603,17 @@ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb) skb->next = NULL; } +/* The per-socket spinlock must be held here. */ +static inline int sk_add_backlog_limited(struct sock *sk, struct sk_buff *skb) +{ + if (sk->sk_backlog.len >= max(sk->sk_backlog.limit, sk->sk_rcvbuf << 1)) + return -ENOBUFS; + + sk_add_backlog(sk, skb); + sk->sk_backlog.len += skb->truesize; + return 0; +} + static inline int sk_backlog_rcv(struct sock *sk, struct sk_buff *skb) { return sk->sk_backlog_rcv(sk, skb); -- cgit v1.1 From a3a858ff18a72a8d388e31ab0d98f7e944841a62 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 4 Mar 2010 18:01:47 +0000 Subject: net: backlog functions rename sk_add_backlog -> __sk_add_backlog sk_add_backlog_limited -> sk_add_backlog Signed-off-by: Zhu Yi Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 2516d76..170353d 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -592,7 +592,7 @@ static inline int sk_stream_memory_free(struct sock *sk) } /* OOB backlog add */ -static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb) +static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb) { if (!sk->sk_backlog.tail) { sk->sk_backlog.head = sk->sk_backlog.tail = skb; @@ -604,12 +604,12 @@ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb) } /* The per-socket spinlock must be held here. */ -static inline int sk_add_backlog_limited(struct sock *sk, struct sk_buff *skb) +static inline int sk_add_backlog(struct sock *sk, struct sk_buff *skb) { if (sk->sk_backlog.len >= max(sk->sk_backlog.limit, sk->sk_rcvbuf << 1)) return -ENOBUFS; - sk_add_backlog(sk, skb); + __sk_add_backlog(sk, skb); sk->sk_backlog.len += skb->truesize; return 0; } -- cgit v1.1 From 723b2f57ad83ee7087acf9a95e8e289414b1f521 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 3 Mar 2010 22:51:50 +0000 Subject: ethtool: Add direct access to ops->get_sset_count This patch is an alternative approach for accessing string counts, vs. the drvinfo indirect approach. This way the drvinfo space doesn't run out, and we don't break ABI later. Signed-off-by: Jeff Garzik Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/ethtool.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index cca1c3d..f6f961fe 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -253,6 +253,17 @@ struct ethtool_gstrings { __u8 data[0]; }; +struct ethtool_sset_info { + __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 reserved; + __u64 sset_mask; /* input: each bit selects an sset to query */ + /* output: each bit a returned sset */ + __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits + in sset_mask. One bit implies one + __u32, two bits implies two + __u32's, etc. */ +}; + enum ethtool_test_flags { ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ @@ -606,9 +617,9 @@ struct ethtool_ops { #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ #define ETHTOOL_RESET 0x00000034 /* Reset hardware */ - -#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ -#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */ +#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ +#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */ +#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET -- cgit v1.1 From d17792ebdf90289c9fd1bce888076d3d60ecd53b Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 4 Mar 2010 08:21:53 +0000 Subject: ethtool: Add direct access to ops->get_sset_count On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik Signed-off-by: David S. Miller --- include/linux/ethtool.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index f6f961fe..b33f316 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -61,6 +61,13 @@ struct ethtool_drvinfo { /* For PCI devices, use pci_name(pci_dev). */ char reserved1[32]; char reserved2[12]; + /* + * Some struct members below are filled in + * using ops->get_sset_count(). Obtaining + * this info from ethtool_drvinfo is now + * deprecated; Use ETHTOOL_GSSET_INFO + * instead. + */ __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ __u32 testinfo_len; -- cgit v1.1 From 0c9a2ac1f8a2e55b3382dfc27256878a58ea49e9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Sun, 7 Mar 2010 00:14:44 +0000 Subject: ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx. IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- include/net/ip6_route.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include') diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 4a808de..68f6783 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -37,6 +37,24 @@ struct route_info { #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 +/* + * rt6_srcprefs2flags() and rt6_flags2srcprefs() translate + * between IPV6_ADDR_PREFERENCES socket option values + * IPV6_PREFER_SRC_TMP = 0x1 + * IPV6_PREFER_SRC_PUBLIC = 0x2 + * IPV6_PREFER_SRC_COA = 0x4 + * and above RT6_LOOKUP_F_SRCPREF_xxx flags. + */ +static inline int rt6_srcprefs2flags(unsigned int srcprefs) +{ + /* No need to bitmask because srcprefs have only 3 bits. */ + return srcprefs << 3; +} + +static inline unsigned int rt6_flags2srcprefs(int flags) +{ + return (flags >> 3) & 7; +} extern void ip6_route_input(struct sk_buff *skb); -- cgit v1.1 From 4045635318538d3ddd2007720412fdc4b08f6a62 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Sun, 7 Mar 2010 16:21:39 +0000 Subject: net: add __must_check to sk_add_backlog Add the "__must_check" tag to sk_add_backlog() so that any failure to check and drop packets will be warned about. Signed-off-by: Zhu Yi Signed-off-by: David S. Miller --- include/net/sock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 170353d..092b055 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -604,7 +604,7 @@ static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb) } /* The per-socket spinlock must be held here. */ -static inline int sk_add_backlog(struct sock *sk, struct sk_buff *skb) +static inline __must_check int sk_add_backlog(struct sock *sk, struct sk_buff *skb) { if (sk->sk_backlog.len >= max(sk->sk_backlog.limit, sk->sk_rcvbuf << 1)) return -ENOBUFS; -- cgit v1.1 From 6cce09f87a04797fae5b947ef2626c14a78f0b49 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 7 Mar 2010 23:21:57 +0000 Subject: tcp: Add SNMP counters for backlog and min_ttl drops Commit 6b03a53a (tcp: use limited socket backlog) added the possibility of dropping frames when backlog queue is full. Commit d218d111 (tcp: Generalized TTL Security Mechanism) added the possibility of dropping frames when TTL is under a given limit. This patch adds new SNMP MIB entries, named TCPBacklogDrop and TCPMinTTLDrop, published in /proc/net/netstat in TcpExt: line netstat -s | egrep "TCPBacklogDrop|TCPMinTTLDrop" TCPBacklogDrop: 0 TCPMinTTLDrop: 0 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/snmp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index e28f5a0..4435d10 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -225,6 +225,8 @@ enum LINUX_MIB_SACKSHIFTED, LINUX_MIB_SACKMERGED, LINUX_MIB_SACKSHIFTFALLBACK, + LINUX_MIB_TCPBACKLOGDROP, + LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */ __LINUX_MIB_MAX }; -- cgit v1.1 From 58b939959d228681208ba997595411fddc860849 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 8 Mar 2010 22:37:10 -0800 Subject: Input: scancode in get/set_keycodes should be unsigned MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The HID layer has some scan codes of the form 0xffbc0000 for logitech devices which do not work if scancode is typed as signed int, so we need to switch to unsigned it instead. While at it keycode being signed does not make much sense either. Acked-by: Márton Németh Acked-by: Matthew Garrett Acked-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index dc24eff..7ed2251 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -58,10 +58,10 @@ struct input_absinfo { #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ -#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */ -#define EVIOCSREP _IOW('E', 0x03, int[2]) /* set repeat settings */ -#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */ -#define EVIOCSKEYCODE _IOW('E', 0x04, int[2]) /* set keycode */ +#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ +#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ +#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ @@ -1142,8 +1142,10 @@ struct input_dev { unsigned int keycodemax; unsigned int keycodesize; void *keycode; - int (*setkeycode)(struct input_dev *dev, int scancode, int keycode); - int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode); + int (*setkeycode)(struct input_dev *dev, + unsigned int scancode, unsigned int keycode); + int (*getkeycode)(struct input_dev *dev, + unsigned int scancode, unsigned int *keycode); struct ff_device *ff; @@ -1415,8 +1417,10 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis); } -int input_get_keycode(struct input_dev *dev, int scancode, int *keycode); -int input_set_keycode(struct input_dev *dev, int scancode, int keycode); +int input_get_keycode(struct input_dev *dev, + unsigned int scancode, unsigned int *keycode); +int input_set_keycode(struct input_dev *dev, + unsigned int scancode, unsigned int keycode); extern struct class input_class; -- cgit v1.1 From 06a09124b5ec65f81df66c56695d9a9ae04a0114 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 9 Mar 2010 20:38:45 -0800 Subject: Input: ads7846 - add support for AD7843 parts The AD7873 is almost identical to the ADS7846; the only difference is related to the Power Management bits PD0 and PD1. This results in a slightly different PENIRQ enable behavior. For the AD7873, VREF should be turned off during differential measurements. So, add the AD7873/43 to the list of driver supported devices, and prevent VREF usage during differential/ratiometric conversion modes. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 51948eb..5710c15 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -12,7 +12,7 @@ enum ads7846_filter { }; struct ads7846_platform_data { - u16 model; /* 7843, 7845, 7846. */ + u16 model; /* 7843, 7845, 7846, 7873. */ u16 vref_delay_usecs; /* 0 for external vref; etc */ u16 vref_mv; /* external vref value, milliVolts */ bool keep_vref_on; /* set to keep vref on for differential -- cgit v1.1 From dc1d628a67a8f042e711ea5accc0beedc3ef0092 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 3 Mar 2010 15:55:04 +0100 Subject: perf: Provide generic perf_sample_data initialization This makes it easier to extend perf_sample_data and fixes a bug on arm and sparc, which failed to set ->raw to NULL, which can cause crashes when combined with PERF_SAMPLE_RAW. It also optimizes PowerPC and tracepoint, because the struct initialization is forced to zero out the whole structure. Signed-off-by: Peter Zijlstra Acked-by: Jean Pihet Reviewed-by: Frederic Weisbecker Acked-by: David S. Miller Cc: Jamie Iles Cc: Paul Mackerras Cc: Stephane Eranian Cc: stable@kernel.org LKML-Reference: <20100304140100.315416040@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 90e0521..6f8cd7d 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -801,6 +801,13 @@ struct perf_sample_data { struct perf_raw_record *raw; }; +static inline +void perf_sample_data_init(struct perf_sample_data *data, u64 addr) +{ + data->addr = addr; + data->raw = NULL; +} + extern void perf_output_sample(struct perf_output_handle *handle, struct perf_event_header *header, struct perf_sample_data *data, -- cgit v1.1 From 2b4c32972b9bcfee29d5e2c1b6f261dda5ef2a21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?YOSHIFUJI=20Hideaki=20/=20=E5=90=89=E8=97=A4=E8=8B=B1?= =?UTF-8?q?=E6=98=8E?= Date: Tue, 9 Mar 2010 16:47:52 +0000 Subject: ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}. Commit a43912ab19... ("tunnel: eliminate recursion field") eliminated use of recursion field from tunnel structures, but its definition still exists in ip6_tnl{}. Let's remove that unused field. Signed-off-by: YOSHIFUJI Hideaki Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index 83b4e00..fbf9d1c 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -15,7 +15,6 @@ struct ip6_tnl { struct ip6_tnl *next; /* next tunnel in list */ struct net_device *dev; /* virtual device associated with tunnel */ - int recursion; /* depth of hard_start_xmit recursion */ struct ip6_tnl_parm parms; /* tunnel configuration parameters */ struct flowi fl; /* flowi template for xmit */ struct dst_entry *dst_cache; /* cached dst */ -- cgit v1.1 From fdba2bb1f2eed85085a0fe154e1acb82de3239f7 Mon Sep 17 00:00:00 2001 From: Ranjith Lohithakshan Date: Wed, 10 Mar 2010 23:41:22 -0800 Subject: Input: ads7846 - add wakeup support Add wakeup support to the ads7846 driver. Platforms can enable wakeup capability by setting the wakeup flag in ads7846_platform_data. With this patch the ads7846 driver can be used to wake the system from suspend. Signed-off-by: Ranjith Lohithakshan Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 5710c15..b4ae570 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -53,5 +53,6 @@ struct ads7846_platform_data { int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); void (*wait_for_sync)(void); + bool wakeup; }; -- cgit v1.1 From b97c4bc16734a2e597dac7f91ee9eb78f4aeef9a Mon Sep 17 00:00:00 2001 From: Luca Barbieri Date: Thu, 11 Mar 2010 14:08:45 -0800 Subject: locking: Make sparse work with inline spinlocks and rwlocks Currently sparse does not work with inline spinlock and rwlock functions. The problem is that they do not use the __acquires/__releases out-of-line functions, but use inline functions with no sparse annotations. This patch adds the appropriate annotations to make it work properly. Signed-off-by: Luca Barbieri Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/linux/rwlock.h | 20 ++++++++++---------- include/linux/spinlock.h | 13 ++++++++----- 2 files changed, 18 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/linux/rwlock.h b/include/linux/rwlock.h index 71e0b00..bc2994e 100644 --- a/include/linux/rwlock.h +++ b/include/linux/rwlock.h @@ -29,25 +29,25 @@ do { \ #endif #ifdef CONFIG_DEBUG_SPINLOCK - extern void do_raw_read_lock(rwlock_t *lock); + extern void do_raw_read_lock(rwlock_t *lock) __acquires(lock); #define do_raw_read_lock_flags(lock, flags) do_raw_read_lock(lock) extern int do_raw_read_trylock(rwlock_t *lock); - extern void do_raw_read_unlock(rwlock_t *lock); - extern void do_raw_write_lock(rwlock_t *lock); + extern void do_raw_read_unlock(rwlock_t *lock) __releases(lock); + extern void do_raw_write_lock(rwlock_t *lock) __acquires(lock); #define do_raw_write_lock_flags(lock, flags) do_raw_write_lock(lock) extern int do_raw_write_trylock(rwlock_t *lock); - extern void do_raw_write_unlock(rwlock_t *lock); + extern void do_raw_write_unlock(rwlock_t *lock) __releases(lock); #else -# define do_raw_read_lock(rwlock) arch_read_lock(&(rwlock)->raw_lock) +# define do_raw_read_lock(rwlock) do {__acquire(lock); arch_read_lock(&(rwlock)->raw_lock); } while (0) # define do_raw_read_lock_flags(lock, flags) \ - arch_read_lock_flags(&(lock)->raw_lock, *(flags)) + do {__acquire(lock); arch_read_lock_flags(&(lock)->raw_lock, *(flags)); } while (0) # define do_raw_read_trylock(rwlock) arch_read_trylock(&(rwlock)->raw_lock) -# define do_raw_read_unlock(rwlock) arch_read_unlock(&(rwlock)->raw_lock) -# define do_raw_write_lock(rwlock) arch_write_lock(&(rwlock)->raw_lock) +# define do_raw_read_unlock(rwlock) do {arch_read_unlock(&(rwlock)->raw_lock); __release(lock); } while (0) +# define do_raw_write_lock(rwlock) do {__acquire(lock); arch_write_lock(&(rwlock)->raw_lock); } while (0) # define do_raw_write_lock_flags(lock, flags) \ - arch_write_lock_flags(&(lock)->raw_lock, *(flags)) + do {__acquire(lock); arch_write_lock_flags(&(lock)->raw_lock, *(flags)); } while (0) # define do_raw_write_trylock(rwlock) arch_write_trylock(&(rwlock)->raw_lock) -# define do_raw_write_unlock(rwlock) arch_write_unlock(&(rwlock)->raw_lock) +# define do_raw_write_unlock(rwlock) do {arch_write_unlock(&(rwlock)->raw_lock); __release(lock); } while (0) #endif #define read_can_lock(rwlock) arch_read_can_lock(&(rwlock)->raw_lock) diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 8608821..89fac6a 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -128,19 +128,21 @@ static inline void smp_mb__after_lock(void) { smp_mb(); } #define raw_spin_unlock_wait(lock) arch_spin_unlock_wait(&(lock)->raw_lock) #ifdef CONFIG_DEBUG_SPINLOCK - extern void do_raw_spin_lock(raw_spinlock_t *lock); + extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock); #define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock) extern int do_raw_spin_trylock(raw_spinlock_t *lock); - extern void do_raw_spin_unlock(raw_spinlock_t *lock); + extern void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock); #else -static inline void do_raw_spin_lock(raw_spinlock_t *lock) +static inline void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock) { + __acquire(lock); arch_spin_lock(&lock->raw_lock); } static inline void -do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) +do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) __acquires(lock) { + __acquire(lock); arch_spin_lock_flags(&lock->raw_lock, *flags); } @@ -149,9 +151,10 @@ static inline int do_raw_spin_trylock(raw_spinlock_t *lock) return arch_spin_trylock(&(lock)->raw_lock); } -static inline void do_raw_spin_unlock(raw_spinlock_t *lock) +static inline void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock) { arch_spin_unlock(&lock->raw_lock); + __release(lock); } #endif -- cgit v1.1 From 97ee9b0257402f4731b55dfea42f24d26d793ddf Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 6 Mar 2010 04:44:14 +0000 Subject: net/9p: Use the tag name in the config space for identifying mount point This patch use the tag name in the config space to identify the mount device. The the virtio device name depend on the enumeration order of the device and may not remain the same across multiple boots So we use the tag name which is set via qemu option to uniquely identify the mount device Signed-off-by: Aneesh Kumar K.V Signed-off-by: Eric Van Hensbergen --- include/linux/virtio_9p.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index 3322750..5cf1176 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -5,4 +5,16 @@ #include #include +/* The feature bitmap for virtio 9P */ + +/* The mount point is specified in a config variable */ +#define VIRTIO_9P_MOUNT_TAG 0 + +struct virtio_9p_config { + /* length of the tag name */ + __u16 tag_len; + /* non-NULL terminated tag name */ + __u8 tag[0]; +} __attribute__((packed)); + #endif /* _LINUX_VIRTIO_9P_H */ -- cgit v1.1 From 86c8437383acd85c05ec7c9a004f59fe7ac9821a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 6 Mar 2010 04:44:15 +0000 Subject: net/9p: Add sysfs mount_tag file for virtio 9P device This adds a new file for virtio 9P device. The file contain details of the mount device name that should be used to mount the 9P file system. Ex: /sys/devices/virtio-pci/virtio1/mount_tag file now contian the tag name to be used to mount the 9P file system. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Eric Van Hensbergen --- include/linux/virtio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index f508c65..40d1709 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -98,6 +98,7 @@ struct virtio_device { void *priv; }; +#define dev_to_virtio(dev) container_of(dev, struct virtio_device, dev) int register_virtio_device(struct virtio_device *dev); void unregister_virtio_device(struct virtio_device *dev); -- cgit v1.1 From 45bc21edb52fa71dbb1324c6f573aa880e95519d Mon Sep 17 00:00:00 2001 From: Sripathi Kodi Date: Mon, 8 Mar 2010 17:33:04 +0000 Subject: 9p: Change the name of new protocol from 9p2010.L to 9p2000.L This patch changes the name of the new 9P protocol from 9p2010.L to 9p2000.u. This is because we learnt that the name 9p2010 is already being used by others. Signed-off-by: Sripathi Kodi Signed-off-by: Eric Van Hensbergen --- include/net/9p/client.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 52e1fff..f076dfa 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -32,13 +32,13 @@ /** enum p9_proto_versions - 9P protocol versions * @p9_proto_legacy: 9P Legacy mode, pre-9P2000.u * @p9_proto_2000u: 9P2000.u extension - * @p9_proto_2010L: 9P2010.L extension + * @p9_proto_2000L: 9P2000.L extension */ enum p9_proto_versions{ p9_proto_legacy = 0, p9_proto_2000u = 1, - p9_proto_2010L = 2, + p9_proto_2000L = 2, }; -- cgit v1.1 From 0a9c14751377a1407f5e35791e13651d2fc7801c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 13 Mar 2010 20:56:56 +0100 Subject: i2c-algo-bit: Add pre- and post-xfer hooks Drivers might have to do random things before and/or after I2C transfers. Add hooks to the i2c-algo-bit implementation to let them do so. Signed-off-by: Jean Delvare Cc: Alex Deucher --- include/linux/i2c-algo-bit.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 111334f..4f98148 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -36,6 +36,8 @@ struct i2c_algo_bit_data { void (*setscl) (void *data, int state); int (*getsda) (void *data); int (*getscl) (void *data); + int (*pre_xfer) (struct i2c_adapter *); + void (*post_xfer) (struct i2c_adapter *); /* local settings */ int udelay; /* half clock cycle time in us, -- cgit v1.1 From 3f995f317f7070e81e8e38bb11357d6671ab6969 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 9 Mar 2010 09:17:36 +0100 Subject: Add the platform data include for the Xilinx XPS IIC Bus Interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This file was missed in the original patch that went into Linus' tree. Cc: "Ben Dooks (embedded platforms)" Cc: linux-i2c@vger.kernel.org Signed-off-by: Richard Röjfors Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- include/linux/i2c-xiic.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 include/linux/i2c-xiic.h (limited to 'include') diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h new file mode 100644 index 0000000..4f9f225 --- /dev/null +++ b/include/linux/i2c-xiic.h @@ -0,0 +1,43 @@ +/* + * i2c-xiic.h + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Xilinx IIC + */ + +#ifndef _LINUX_I2C_XIIC_H +#define _LINUX_I2C_XIIC_H + +/** + * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The actuall devices to add. + * + * This purpose of this platform data struct is to be able to provide a number + * of devices that should be added to the I2C bus. The reason is that sometimes + * the I2C board info is not enough, a new PCI board can for instance be + * plugged into a standard PC, and the bus number might be unknown at + * early init time. + */ +struct xiic_i2c_platform_data { + u8 num_devices; + struct i2c_board_info const *devices; +}; + +#endif /* _LINUX_I2C_XIIC_H */ -- cgit v1.1