From 2f495c398edca50ac251c134f1995a2fb3c06cb7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 21 Jun 2010 13:20:46 +1000 Subject: net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag This moves the various known Marvell PHY IDs to include/linux/marvell_phy.h along with dev_flags definitions for use by the driver. I then added a flag that changes the PHY init code to setup the LEDs config to the values needed to operate a dns323 rev C1 NAS. I moved the existing "resistance" flag to the .h as well, though I've been unable to find whoever sets this to convert it to use that constant. Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Wolfram Sang Acked-by: David S. Miller Signed-off-by: Nicolas Pitre --- include/linux/marvell_phy.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 include/linux/marvell_phy.h (limited to 'include') diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h new file mode 100644 index 0000000..2ed4fb8 --- /dev/null +++ b/include/linux/marvell_phy.h @@ -0,0 +1,20 @@ +#ifndef _MARVELL_PHY_H +#define _MARVELL_PHY_H + +/* Mask used for ID comparisons */ +#define MARVELL_PHY_ID_MASK 0xfffffff0 + +/* Known PHY IDs */ +#define MARVELL_PHY_ID_88E1101 0x01410c60 +#define MARVELL_PHY_ID_88E1112 0x01410c90 +#define MARVELL_PHY_ID_88E1111 0x01410cc0 +#define MARVELL_PHY_ID_88E1118 0x01410e10 +#define MARVELL_PHY_ID_88E1121R 0x01410cb0 +#define MARVELL_PHY_ID_88E1145 0x01410cd0 +#define MARVELL_PHY_ID_88E1240 0x01410e30 + +/* struct phy_device dev_flags definitions */ +#define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 +#define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002 + +#endif /* _MARVELL_PHY_H */ -- cgit v1.1 From 98864ff58dd2b8ef9e72b0d2c70f34e7ff24a2ee Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 22 May 2010 23:59:11 +0100 Subject: ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB Signed-off-by: Russell King --- include/linux/omapfb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 9bdd914..7e4cd61 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -253,7 +253,7 @@ struct omapfb_platform_data { /* in arch/arm/plat-omap/fb.c */ extern void omapfb_set_platform_data(struct omapfb_platform_data *data); extern void omapfb_set_ctrl_platform_data(void *pdata); -extern void omapfb_reserve_sdram(void); +extern void omapfb_reserve_sdram_memblock(void); #endif -- cgit v1.1 From ec489aa8f993f8d2ec962ce113071faac482aa27 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Jun 2010 08:13:52 +0100 Subject: ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative In the ST-Ericsson version of the PL011 the TX and RX have different control registers. Cc: Alessandro Rubini Signed-off-by: Marcin Mielczarczyk Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/serial.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 5a5a7fd..93c96a6 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -38,10 +38,12 @@ #define UART01x_FR 0x18 /* Flag register (Read only). */ #define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ +#define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */ #define UART01x_ILPR 0x20 /* IrDA low power counter register. */ #define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ #define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ #define UART011_LCRH 0x2c /* Line control register. */ +#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ #define UART011_CR 0x30 /* Control register. */ #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ #define UART011_IMSC 0x38 /* Interrupt mask. */ -- cgit v1.1 From ac3e3fb424d44109dda3b1a3459e1b30fa60ac4a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Jun 2010 20:40:22 +0100 Subject: ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative Implementation of the ST-Ericsson baudrate extension in the PL011 block. In this modified variant it is possible to change the sampling factor from 16 to 8, and thanks to this we can get higher baudrates while still using the same peripheral clock. Also replace the simple division to determine the baud divisor with DIV_ROUND_CLOSEST() rather than a simple integer division. Cc: Alessandro Rubini Cc: Jerzy Kasenberg Signed-off-by: Marcin Mielczarczyk Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/serial.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 93c96a6..e1b634b 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -86,6 +86,7 @@ #define UART010_CR_TIE 0x0020 #define UART010_CR_RIE 0x0010 #define UART010_CR_MSIE 0x0008 +#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ #define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ #define UART01x_CR_SIREN 0x0002 /* SIR enable */ #define UART01x_CR_UARTEN 0x0001 /* UART enable */ -- cgit v1.1 From bb8f563c848faa113059973f68c24a3bb6a9585e Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 21 Jul 2010 12:53:57 +0100 Subject: ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback Platforms may have some external power control which need to be controlled from board specific code. Rename the translate_vdd() callback to vdd_handler() and pass it the power mode. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- include/linux/amba/mmci.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 7e466fe..ca84ce7 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -15,9 +15,10 @@ * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @translate_vdd: a callback function to translate a MMC_VDD_* - * mask into a value to be binary or:ed and written into the - * MMCIPWR register of the block + * @vdd_handler: a callback function to translate a MMC_VDD_* + * mask into a value to be binary (or set some other custom bits + * in MMCIPWR) or:ed and written into the MMCIPWR register of the + * block. May also control external power based on the power_mode. * @status: if no GPIO read function was given to the block in * gpio_wp (below) this function will be called to determine * whether a card is present in the MMC slot or not @@ -29,7 +30,8 @@ struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*translate_vdd)(struct device *, unsigned int); + u32 (*vdd_handler)(struct device *, unsigned int vdd, + unsigned char power_mode); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; -- cgit v1.1 From 7cfe249475fdd82ad3c2767a9b906cc775dab868 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 15 Jul 2010 10:47:14 +0100 Subject: ARM: AMBA: Add pclk support to AMBA bus infrastructure Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: Russell King --- include/linux/amba/bus.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 8b10386..b0c1740 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -14,14 +14,19 @@ #ifndef ASMARM_AMBA_H #define ASMARM_AMBA_H +#include #include +#include #include #define AMBA_NR_IRQS 2 +struct clk; + struct amba_device { struct device dev; struct resource res; + struct clk *pclk; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -59,6 +64,12 @@ struct amba_device *amba_find_device(const char *, struct device *, unsigned int int amba_request_regions(struct amba_device *, const char *); void amba_release_regions(struct amba_device *); +#define amba_pclk_enable(d) \ + (IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk)) + +#define amba_pclk_disable(d) \ + do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) + #define amba_config(d) (((d)->periphid >> 24) & 0xff) #define amba_rev(d) (((d)->periphid >> 20) & 0x0f) #define amba_manf(d) (((d)->periphid >> 12) & 0xff) -- cgit v1.1