diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/BusLogic.h | |
download | kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/BusLogic.h')
-rw-r--r-- | drivers/scsi/BusLogic.h | 1359 |
1 files changed, 1359 insertions, 0 deletions
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h new file mode 100644 index 0000000..1aaa656 --- /dev/null +++ b/drivers/scsi/BusLogic.h @@ -0,0 +1,1359 @@ +/* + + Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters + + Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> + + This program is free software; you may redistribute and/or modify it under + the terms of the GNU General Public License Version 2 as published by the + Free Software Foundation. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for complete details. + + The author respectfully requests that any modifications to this software be + sent directly to him for evaluation and testing. + + Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose + advice has been invaluable, to David Gentzel, for writing the original Linux + BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. + + Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB + Manager available as freely redistributable source code. + +*/ + +#ifndef _BUSLOGIC_H +#define _BUSLOGIC_H + +#include <linux/config.h> + +#ifndef PACKED +#define PACKED __attribute__((packed)) +#endif + +/* + FlashPoint support is only available for the Intel x86 Architecture with + CONFIG_PCI set. +*/ + +#ifndef __i386__ +#undef CONFIG_SCSI_OMIT_FLASHPOINT +#define CONFIG_SCSI_OMIT_FLASHPOINT +#endif + +#ifndef CONFIG_PCI +#undef CONFIG_SCSI_OMIT_FLASHPOINT +#define CONFIG_SCSI_OMIT_FLASHPOINT +#define BusLogic_InitializeProbeInfoListISA BusLogic_InitializeProbeInfoList +#endif + + +/* + Define the maximum number of BusLogic Host Adapters supported by this driver. +*/ + +#define BusLogic_MaxHostAdapters 16 + + +/* + Define the maximum number of Target Devices supported by this driver. +*/ + +#define BusLogic_MaxTargetDevices 16 + + +/* + Define the maximum number of Scatter/Gather Segments used by this driver. + For optimal performance, it is important that this limit be at least as + large as the largest single request generated by the I/O Subsystem. +*/ + +#define BusLogic_ScatterGatherLimit 128 + + +/* + Define the maximum, maximum automatic, minimum automatic, and default Queue + Depth to allow for Target Devices depending on whether or not they support + Tagged Queuing and whether or not ISA Bounce Buffers are required. +*/ + +#define BusLogic_MaxTaggedQueueDepth 64 +#define BusLogic_MaxAutomaticTaggedQueueDepth 28 +#define BusLogic_MinAutomaticTaggedQueueDepth 7 +#define BusLogic_TaggedQueueDepthBB 3 +#define BusLogic_UntaggedQueueDepth 3 +#define BusLogic_UntaggedQueueDepthBB 2 + + +/* + Define the default amount of time in seconds to wait between a Host Adapter + Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands. + Some SCSI devices get confused if they receive SCSI commands too soon after + a SCSI Bus Reset. +*/ + +#define BusLogic_DefaultBusSettleTime 2 + + +/* + Define the maximum number of Mailboxes that should be used for MultiMaster + Host Adapters. This number is chosen to be larger than the maximum Host + Adapter Queue Depth and small enough so that the Host Adapter structure + does not cross an allocation block size boundary. +*/ + +#define BusLogic_MaxMailboxes 211 + + +/* + Define the number of CCBs that should be allocated as a group to optimize + Kernel memory allocation. +*/ + +#define BusLogic_CCB_AllocationGroupSize 7 + + +/* + Define the Host Adapter Line and Message Buffer Sizes. +*/ + +#define BusLogic_LineBufferSize 100 +#define BusLogic_MessageBufferSize 9700 + + +/* + Define the Driver Message Levels. +*/ + +enum BusLogic_MessageLevel { + BusLogic_AnnounceLevel = 0, + BusLogic_InfoLevel = 1, + BusLogic_NoticeLevel = 2, + BusLogic_WarningLevel = 3, + BusLogic_ErrorLevel = 4 +}; + +static char *BusLogic_MessageLevelMap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR }; + + +/* + Define Driver Message macros. +*/ + +#define BusLogic_Announce(Format, Arguments...) \ + BusLogic_Message(BusLogic_AnnounceLevel, Format, ##Arguments) + +#define BusLogic_Info(Format, Arguments...) \ + BusLogic_Message(BusLogic_InfoLevel, Format, ##Arguments) + +#define BusLogic_Notice(Format, Arguments...) \ + BusLogic_Message(BusLogic_NoticeLevel, Format, ##Arguments) + +#define BusLogic_Warning(Format, Arguments...) \ + BusLogic_Message(BusLogic_WarningLevel, Format, ##Arguments) + +#define BusLogic_Error(Format, Arguments...) \ + BusLogic_Message(BusLogic_ErrorLevel, Format, ##Arguments) + + +/* + Define the types of BusLogic Host Adapters that are supported and the number + of I/O Addresses required by each type. +*/ + +enum BusLogic_HostAdapterType { + BusLogic_MultiMaster = 1, + BusLogic_FlashPoint = 2 +} PACKED; + +#define BusLogic_MultiMasterAddressCount 4 +#define BusLogic_FlashPointAddressCount 256 + +static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddressCount, BusLogic_FlashPointAddressCount }; + + +/* + Define macros for testing the Host Adapter Type. +*/ + +#ifndef CONFIG_SCSI_OMIT_FLASHPOINT + +#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \ + (HostAdapter->HostAdapterType == BusLogic_MultiMaster) + +#define BusLogic_FlashPointHostAdapterP(HostAdapter) \ + (HostAdapter->HostAdapterType == BusLogic_FlashPoint) + +#else + +#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \ + (true) + +#define BusLogic_FlashPointHostAdapterP(HostAdapter) \ + (false) + +#endif + + +/* + Define the possible Host Adapter Bus Types. +*/ + +enum BusLogic_HostAdapterBusType { + BusLogic_Unknown_Bus = 0, + BusLogic_ISA_Bus = 1, + BusLogic_EISA_Bus = 2, + BusLogic_PCI_Bus = 3, + BusLogic_VESA_Bus = 4, + BusLogic_MCA_Bus = 5 +} PACKED; + +static char *BusLogic_HostAdapterBusNames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" }; + +static enum BusLogic_HostAdapterBusType BusLogic_HostAdapterBusTypes[] = { + BusLogic_VESA_Bus, /* BT-4xx */ + BusLogic_ISA_Bus, /* BT-5xx */ + BusLogic_MCA_Bus, /* BT-6xx */ + BusLogic_EISA_Bus, /* BT-7xx */ + BusLogic_Unknown_Bus, /* BT-8xx */ + BusLogic_PCI_Bus /* BT-9xx */ +}; + +/* + Define the possible Host Adapter BIOS Disk Geometry Translations. +*/ + +enum BusLogic_BIOS_DiskGeometryTranslation { + BusLogic_BIOS_Disk_Not_Installed = 0, + BusLogic_BIOS_Disk_Installed_64x32 = 1, + BusLogic_BIOS_Disk_Installed_128x32 = 2, + BusLogic_BIOS_Disk_Installed_255x63 = 3 +} PACKED; + + +/* + Define a Boolean data type. +*/ + +typedef enum { + false, + true +} PACKED boolean; + +/* + Define a 10^18 Statistics Byte Counter data type. +*/ + +struct BusLogic_ByteCounter { + unsigned int Units; + unsigned int Billions; +}; + + +/* + Define the structure for I/O Address and Bus Probing Information. +*/ + +struct BusLogic_ProbeInfo { + enum BusLogic_HostAdapterType HostAdapterType; + enum BusLogic_HostAdapterBusType HostAdapterBusType; + unsigned long IO_Address; + unsigned long PCI_Address; + struct pci_dev *PCI_Device; + unsigned char Bus; + unsigned char Device; + unsigned char IRQ_Channel; +}; + +/* + Define the Probe Options. +*/ + +struct BusLogic_ProbeOptions { + boolean NoProbe:1; /* Bit 0 */ + boolean NoProbeISA:1; /* Bit 1 */ + boolean NoProbePCI:1; /* Bit 2 */ + boolean NoSortPCI:1; /* Bit 3 */ + boolean MultiMasterFirst:1; /* Bit 4 */ + boolean FlashPointFirst:1; /* Bit 5 */ + boolean LimitedProbeISA:1; /* Bit 6 */ + boolean Probe330:1; /* Bit 7 */ + boolean Probe334:1; /* Bit 8 */ + boolean Probe230:1; /* Bit 9 */ + boolean Probe234:1; /* Bit 10 */ + boolean Probe130:1; /* Bit 11 */ + boolean Probe134:1; /* Bit 12 */ +}; + +/* + Define the Global Options. +*/ + +struct BusLogic_GlobalOptions { + boolean TraceProbe:1; /* Bit 0 */ + boolean TraceHardwareReset:1; /* Bit 1 */ + boolean TraceConfiguration:1; /* Bit 2 */ + boolean TraceErrors:1; /* Bit 3 */ +}; + +/* + Define the Local Options. +*/ + +struct BusLogic_LocalOptions { + boolean InhibitTargetInquiry:1; /* Bit 0 */ +}; + +/* + Define the BusLogic SCSI Host Adapter I/O Register Offsets. +*/ + +#define BusLogic_ControlRegisterOffset 0 /* WO register */ +#define BusLogic_StatusRegisterOffset 0 /* RO register */ +#define BusLogic_CommandParameterRegisterOffset 1 /* WO register */ +#define BusLogic_DataInRegisterOffset 1 /* RO register */ +#define BusLogic_InterruptRegisterOffset 2 /* RO register */ +#define BusLogic_GeometryRegisterOffset 3 /* RO register */ + +/* + Define the structure of the write-only Control Register. +*/ + +union BusLogic_ControlRegister { + unsigned char All; + struct { + unsigned char:4; /* Bits 0-3 */ + boolean SCSIBusReset:1; /* Bit 4 */ + boolean InterruptReset:1; /* Bit 5 */ + boolean SoftReset:1; /* Bit 6 */ + boolean HardReset:1; /* Bit 7 */ + } cr; +}; + +/* + Define the structure of the read-only Status Register. +*/ + +union BusLogic_StatusRegister { + unsigned char All; + struct { + boolean CommandInvalid:1; /* Bit 0 */ + boolean Reserved:1; /* Bit 1 */ + boolean DataInRegisterReady:1; /* Bit 2 */ + boolean CommandParameterRegisterBusy:1; /* Bit 3 */ + boolean HostAdapterReady:1; /* Bit 4 */ + boolean InitializationRequired:1; /* Bit 5 */ + boolean DiagnosticFailure:1; /* Bit 6 */ + boolean DiagnosticActive:1; /* Bit 7 */ + } sr; +}; + +/* + Define the structure of the read-only Interrupt Register. +*/ + +union BusLogic_InterruptRegister { + unsigned char All; + struct { + boolean IncomingMailboxLoaded:1; /* Bit 0 */ + boolean OutgoingMailboxAvailable:1; /* Bit 1 */ + boolean CommandComplete:1; /* Bit 2 */ + boolean ExternalBusReset:1; /* Bit 3 */ + unsigned char Reserved:3; /* Bits 4-6 */ + boolean InterruptValid:1; /* Bit 7 */ + } ir; +}; + +/* + Define the structure of the read-only Geometry Register. +*/ + +union BusLogic_GeometryRegister { + unsigned char All; + struct { + enum BusLogic_BIOS_DiskGeometryTranslation Drive0Geometry:2; /* Bits 0-1 */ + enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2; /* Bits 2-3 */ + unsigned char:3; /* Bits 4-6 */ + boolean ExtendedTranslationEnabled:1; /* Bit 7 */ + } gr; +}; + +/* + Define the BusLogic SCSI Host Adapter Command Register Operation Codes. +*/ + +enum BusLogic_OperationCode { + BusLogic_TestCommandCompleteInterrupt = 0x00, + BusLogic_InitializeMailbox = 0x01, + BusLogic_ExecuteMailboxCommand = 0x02, + BusLogic_ExecuteBIOSCommand = 0x03, + BusLogic_InquireBoardID = 0x04, + BusLogic_EnableOutgoingMailboxAvailableInt = 0x05, + BusLogic_SetSCSISelectionTimeout = 0x06, + BusLogic_SetPreemptTimeOnBus = 0x07, + BusLogic_SetTimeOffBus = 0x08, + BusLogic_SetBusTransferRate = 0x09, + BusLogic_InquireInstalledDevicesID0to7 = 0x0A, + BusLogic_InquireConfiguration = 0x0B, + BusLogic_EnableTargetMode = 0x0C, + BusLogic_InquireSetupInformation = 0x0D, + BusLogic_WriteAdapterLocalRAM = 0x1A, + BusLogic_ReadAdapterLocalRAM = 0x1B, + BusLogic_WriteBusMasterChipFIFO = 0x1C, + BusLogic_ReadBusMasterChipFIFO = 0x1D, + BusLogic_EchoCommandData = 0x1F, + BusLogic_HostAdapterDiagnostic = 0x20, + BusLogic_SetAdapterOptions = 0x21, + BusLogic_InquireInstalledDevicesID8to15 = 0x23, + BusLogic_InquireTargetDevices = 0x24, + BusLogic_DisableHostAdapterInterrupt = 0x25, + BusLogic_InitializeExtendedMailbox = 0x81, + BusLogic_ExecuteSCSICommand = 0x83, + BusLogic_InquireFirmwareVersion3rdDigit = 0x84, + BusLogic_InquireFirmwareVersionLetter = 0x85, + BusLogic_InquirePCIHostAdapterInformation = 0x86, + BusLogic_InquireHostAdapterModelNumber = 0x8B, + BusLogic_InquireSynchronousPeriod = 0x8C, + BusLogic_InquireExtendedSetupInformation = 0x8D, + BusLogic_EnableStrictRoundRobinMode = 0x8F, + BusLogic_StoreHostAdapterLocalRAM = 0x90, + BusLogic_FetchHostAdapterLocalRAM = 0x91, + BusLogic_StoreLocalDataInEEPROM = 0x92, + BusLogic_UploadAutoSCSICode = 0x94, + BusLogic_ModifyIOAddress = 0x95, + BusLogic_SetCCBFormat = 0x96, + BusLogic_WriteInquiryBuffer = 0x9A, + BusLogic_ReadInquiryBuffer = 0x9B, + BusLogic_FlashROMUploadDownload = 0xA7, + BusLogic_ReadSCAMData = 0xA8, + BusLogic_WriteSCAMData = 0xA9 +}; + +/* + Define the Inquire Board ID reply structure. +*/ + +struct BusLogic_BoardID { + unsigned char BoardType; /* Byte 0 */ + unsigned char CustomFeatures; /* Byte 1 */ + unsigned char FirmwareVersion1stDigit; /* Byte 2 */ + unsigned char FirmwareVersion2ndDigit; /* Byte 3 */ +}; + +/* + Define the Inquire Configuration reply structure. +*/ + +struct BusLogic_Configuration { + unsigned char:5; /* Byte 0 Bits 0-4 */ + boolean DMA_Channel5:1; /* Byte 0 Bit 5 */ + boolean DMA_Channel6:1; /* Byte 0 Bit 6 */ + boolean DMA_Channel7:1; /* Byte 0 Bit 7 */ + boolean IRQ_Channel9:1; /* Byte 1 Bit 0 */ + boolean IRQ_Channel10:1; /* Byte 1 Bit 1 */ + boolean IRQ_Channel11:1; /* Byte 1 Bit 2 */ + boolean IRQ_Channel12:1; /* Byte 1 Bit 3 */ + unsigned char:1; /* Byte 1 Bit 4 */ + boolean IRQ_Channel14:1; /* Byte 1 Bit 5 */ + boolean IRQ_Channel15:1; /* Byte 1 Bit 6 */ + unsigned char:1; /* Byte 1 Bit 7 */ + unsigned char HostAdapterID:4; /* Byte 2 Bits 0-3 */ + unsigned char:4; /* Byte 2 Bits 4-7 */ +}; + +/* + Define the Inquire Setup Information reply structure. +*/ + +struct BusLogic_SynchronousValue { + unsigned char Offset:4; /* Bits 0-3 */ + unsigned char TransferPeriod:3; /* Bits 4-6 */ + boolean Synchronous:1; /* Bit 7 */ +}; + +struct BusLogic_SetupInformation { + boolean SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */ + boolean ParityCheckingEnabled:1; /* Byte 0 Bit 1 */ + unsigned char:6; /* Byte 0 Bits 2-7 */ + unsigned char BusTransferRate; /* Byte 1 */ + unsigned char PreemptTimeOnBus; /* Byte 2 */ + unsigned char TimeOffBus; /* Byte 3 */ + unsigned char MailboxCount; /* Byte 4 */ + unsigned char MailboxAddress[3]; /* Bytes 5-7 */ + struct BusLogic_SynchronousValue SynchronousValuesID0to7[8]; /* Bytes 8-15 */ + unsigned char DisconnectPermittedID0to7; /* Byte 16 */ + unsigned char Signature; /* Byte 17 */ + unsigned char CharacterD; /* Byte 18 */ + unsigned char HostBusType; /* Byte 19 */ + unsigned char WideTransfersPermittedID0to7; /* Byte 20 */ + unsigned char WideTransfersActiveID0to7; /* Byte 21 */ + struct BusLogic_SynchronousValue SynchronousValuesID8to15[8]; /* Bytes 22-29 */ + unsigned char DisconnectPermittedID8to15; /* Byte 30 */ + unsigned char:8; /* Byte 31 */ + unsigned char WideTransfersPermittedID8to15; /* Byte 32 */ + unsigned char WideTransfersActiveID8to15; /* Byte 33 */ +}; + +/* + Define the Initialize Extended Mailbox request structure. +*/ + +struct BusLogic_ExtendedMailboxRequest { + unsigned char MailboxCount; /* Byte 0 */ + u32 BaseMailboxAddress; /* Bytes 1-4 */ +} PACKED; + + +/* + Define the Inquire PCI Host Adapter Information reply type. The ISA + Compatible I/O Port values are defined here and are also used with + the Modify I/O Address command. +*/ + +enum BusLogic_ISACompatibleIOPort { + BusLogic_IO_330 = 0, + BusLogic_IO_334 = 1, + BusLogic_IO_230 = 2, + BusLogic_IO_234 = 3, + BusLogic_IO_130 = 4, + BusLogic_IO_134 = 5, + BusLogic_IO_Disable = 6, + BusLogic_IO_Disable2 = 7 +} PACKED; + +struct BusLogic_PCIHostAdapterInformation { + enum BusLogic_ISACompatibleIOPort ISACompatibleIOPort; /* Byte 0 */ + unsigned char PCIAssignedIRQChannel; /* Byte 1 */ + boolean LowByteTerminated:1; /* Byte 2 Bit 0 */ + boolean HighByteTerminated:1; /* Byte 2 Bit 1 */ + unsigned char:2; /* Byte 2 Bits 2-3 */ + boolean JP1:1; /* Byte 2 Bit 4 */ + boolean JP2:1; /* Byte 2 Bit 5 */ + boolean JP3:1; /* Byte 2 Bit 6 */ + boolean GenericInfoValid:1; /* Byte 2 Bit 7 */ + unsigned char:8; /* Byte 3 */ +}; + +/* + Define the Inquire Extended Setup Information reply structure. +*/ + +struct BusLogic_ExtendedSetupInformation { + unsigned char BusType; /* Byte 0 */ + unsigned char BIOS_Address; /* Byte 1 */ + unsigned short ScatterGatherLimit; /* Bytes 2-3 */ + unsigned char MailboxCount; /* Byte 4 */ + u32 BaseMailboxAddress; /* Bytes 5-8 */ + struct { + unsigned char:2; /* Byte 9 Bits 0-1 */ + boolean FastOnEISA:1; /* Byte 9 Bit 2 */ + unsigned char:3; /* Byte 9 Bits 3-5 */ + boolean LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */ + unsigned char:1; /* Byte 9 Bit 7 */ + } Misc; + unsigned char FirmwareRevision[3]; /* Bytes 10-12 */ + boolean HostWideSCSI:1; /* Byte 13 Bit 0 */ + boolean HostDifferentialSCSI:1; /* Byte 13 Bit 1 */ + boolean HostSupportsSCAM:1; /* Byte 13 Bit 2 */ + boolean HostUltraSCSI:1; /* Byte 13 Bit 3 */ + boolean HostSmartTermination:1; /* Byte 13 Bit 4 */ + unsigned char:3; /* Byte 13 Bits 5-7 */ +} PACKED; + +/* + Define the Enable Strict Round Robin Mode request type. +*/ + +enum BusLogic_RoundRobinModeRequest { + BusLogic_AggressiveRoundRobinMode = 0, + BusLogic_StrictRoundRobinMode = 1 +} PACKED; + + +/* + Define the Fetch Host Adapter Local RAM request type. +*/ + +#define BusLogic_BIOS_BaseOffset 0 +#define BusLogic_AutoSCSI_BaseOffset 64 + +struct BusLogic_FetchHostAdapterLocalRAMRequest { + unsigned char ByteOffset; /* Byte 0 */ + unsigned char ByteCount; /* Byte 1 */ +}; + +/* + Define the Host Adapter Local RAM AutoSCSI structure. +*/ + +struct BusLogic_AutoSCSIData { + unsigned char InternalFactorySignature[2]; /* Bytes 0-1 */ + unsigned char InformationByteCount; /* Byte 2 */ + unsigned char HostAdapterType[6]; /* Bytes 3-8 */ + unsigned char:8; /* Byte 9 */ + boolean FloppyEnabled:1; /* Byte 10 Bit 0 */ + boolean FloppySecondary:1; /* Byte 10 Bit 1 */ + boolean LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */ + unsigned char:2; /* Byte 10 Bits 3-4 */ + unsigned char SystemRAMAreaForBIOS:3; /* Byte 10 Bits 5-7 */ + unsigned char DMA_Channel:7; /* Byte 11 Bits 0-6 */ + boolean DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */ + unsigned char IRQ_Channel:7; /* Byte 12 Bits 0-6 */ + boolean IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */ + unsigned char DMA_TransferRate; /* Byte 13 */ + unsigned char SCSI_ID; /* Byte 14 */ + boolean LowByteTerminated:1; /* Byte 15 Bit 0 */ + boolean ParityCheckingEnabled:1; /* Byte 15 Bit 1 */ + boolean HighByteTerminated:1; /* Byte 15 Bit 2 */ + boolean NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */ + boolean FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */ + boolean BusResetEnabled:1; /* Byte 15 Bit 5 */ + boolean:1; /* Byte 15 Bit 6 */ + boolean ActiveNegationEnabled:1; /* Byte 15 Bit 7 */ + unsigned char BusOnDelay; /* Byte 16 */ + unsigned char BusOffDelay; /* Byte 17 */ + boolean HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */ + boolean BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */ + boolean ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */ + boolean MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */ + boolean:1; /* Byte 18 Bit 4 */ + boolean BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */ + boolean BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */ + boolean FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */ + unsigned short DeviceEnabled; /* Bytes 19-20 */ + unsigned short WidePermitted; /* Bytes 21-22 */ + unsigned short FastPermitted; /* Bytes 23-24 */ + unsigned short SynchronousPermitted; /* Bytes 25-26 */ + unsigned short DisconnectPermitted; /* Bytes 27-28 */ + unsigned short SendStartUnitCommand; /* Bytes 29-30 */ + unsigned short IgnoreInBIOSScan; /* Bytes 31-32 */ + unsigned char PCIInterruptPin:2; /* Byte 33 Bits 0-1 */ + unsigned char HostAdapterIOPortAddress:2; /* Byte 33 Bits 2-3 */ + boolean StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */ + boolean VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */ + boolean VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */ + boolean VESABurstReadEnabled:1; /* Byte 33 Bit 7 */ + unsigned short UltraPermitted; /* Bytes 34-35 */ + unsigned int:32; /* Bytes 36-39 */ + unsigned char:8; /* Byte 40 */ + unsigned char AutoSCSIMaximumLUN; /* Byte 41 */ + boolean:1; /* Byte 42 Bit 0 */ + boolean SCAM_Dominant:1; /* Byte 42 Bit 1 */ + boolean SCAM_Enabled:1; /* Byte 42 Bit 2 */ + boolean SCAM_Level2:1; /* Byte 42 Bit 3 */ + unsigned char:4; /* Byte 42 Bits 4-7 */ + boolean INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */ + boolean:1; /* Byte 43 Bit 1 */ + boolean CDROMBootEnabled:1; /* Byte 43 Bit 2 */ + unsigned char:5; /* Byte 43 Bits 3-7 */ + unsigned char BootTargetID:4; /* Byte 44 Bits 0-3 */ + unsigned char BootChannel:4; /* Byte 44 Bits 4-7 */ + unsigned char ForceBusDeviceScanningOrder:1; /* Byte 45 Bit 0 */ + unsigned char:7; /* Byte 45 Bits 1-7 */ + unsigned short NonTaggedToAlternateLUNPermitted; /* Bytes 46-47 */ + unsigned short RenegotiateSyncAfterCheckCondition; /* Bytes 48-49 */ + unsigned char Reserved[10]; /* Bytes 50-59 */ + unsigned char ManufacturingDiagnostic[2]; /* Bytes 60-61 */ + unsigned short Checksum; /* Bytes 62-63 */ +} PACKED; + +/* + Define the Host Adapter Local RAM Auto SCSI Byte 45 structure. +*/ + +struct BusLogic_AutoSCSIByte45 { + unsigned char ForceBusDeviceScanningOrder:1; /* Bit 0 */ + unsigned char:7; /* Bits 1-7 */ +}; + +/* + Define the Host Adapter Local RAM BIOS Drive Map Byte structure. +*/ + +#define BusLogic_BIOS_DriveMapOffset 17 + +struct BusLogic_BIOSDriveMapByte { + unsigned char TargetIDBit3:1; /* Bit 0 */ + unsigned char:2; /* Bits 1-2 */ + enum BusLogic_BIOS_DiskGeometryTranslation DiskGeometry:2; /* Bits 3-4 */ + unsigned char TargetID:3; /* Bits 5-7 */ +}; + +/* + Define the Set CCB Format request type. Extended LUN Format CCBs are + necessary to support more than 8 Logical Units per Target Device. +*/ + +enum BusLogic_SetCCBFormatRequest { + BusLogic_LegacyLUNFormatCCB = 0, + BusLogic_ExtendedLUNFormatCCB = 1 +} PACKED; + +/* + Define the Outgoing Mailbox Action Codes. +*/ + +enum BusLogic_ActionCode { + BusLogic_OutgoingMailboxFree = 0x00, + BusLogic_MailboxStartCommand = 0x01, + BusLogic_MailboxAbortCommand = 0x02 +} PACKED; + + +/* + Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware + only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so + completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5. +*/ + +enum BusLogic_CompletionCode { + BusLogic_IncomingMailboxFree = 0x00, + BusLogic_CommandCompletedWithoutError = 0x01, + BusLogic_CommandAbortedAtHostRequest = 0x02, + BusLogic_AbortedCommandNotFound = 0x03, + BusLogic_CommandCompletedWithError = 0x04, + BusLogic_InvalidCCB = 0x05 +} PACKED; + +/* + Define the Command Control Block (CCB) Opcodes. +*/ + +enum BusLogic_CCB_Opcode { + BusLogic_InitiatorCCB = 0x00, + BusLogic_TargetCCB = 0x01, + BusLogic_InitiatorCCB_ScatterGather = 0x02, + BusLogic_InitiatorCCB_ResidualDataLength = 0x03, + BusLogic_InitiatorCCB_ScatterGatherResidual = 0x04, + BusLogic_BusDeviceReset = 0x81 +} PACKED; + + +/* + Define the CCB Data Direction Codes. +*/ + +enum BusLogic_DataDirection { + BusLogic_UncheckedDataTransfer = 0, + BusLogic_DataInLengthChecked = 1, + BusLogic_DataOutLengthChecked = 2, + BusLogic_NoDataTransfer = 3 +}; + + +/* + Define the Host Adapter Status Codes. The MultiMaster Firmware does not + return status code 0x0C; it uses 0x12 for both overruns and underruns. +*/ + +enum BusLogic_HostAdapterStatus { + BusLogic_CommandCompletedNormally = 0x00, + BusLogic_LinkedCommandCompleted = 0x0A, + BusLogic_LinkedCommandCompletedWithFlag = 0x0B, + BusLogic_DataUnderRun = 0x0C, + BusLogic_SCSISelectionTimeout = 0x11, + BusLogic_DataOverRun = 0x12, + BusLogic_UnexpectedBusFree = 0x13, + BusLogic_InvalidBusPhaseRequested = 0x14, + BusLogic_InvalidOutgoingMailboxActionCode = 0x15, + BusLogic_InvalidCommandOperationCode = 0x16, + BusLogic_LinkedCCBhasInvalidLUN = 0x17, + BusLogic_InvalidCommandParameter = 0x1A, + BusLogic_AutoRequestSenseFailed = 0x1B, + BusLogic_TaggedQueuingMessageRejected = 0x1C, + BusLogic_UnsupportedMessageReceived = 0x1D, + BusLogic_HostAdapterHardwareFailed = 0x20, + BusLogic_TargetFailedResponseToATN = 0x21, + BusLogic_HostAdapterAssertedRST = 0x22, + BusLogic_OtherDeviceAssertedRST = 0x23, + BusLogic_TargetDeviceReconnectedImproperly = 0x24, + BusLogic_HostAdapterAssertedBusDeviceReset = 0x25, + BusLogic_AbortQueueGenerated = 0x26, + BusLogic_HostAdapterSoftwareError = 0x27, + BusLogic_HostAdapterHardwareTimeoutError = 0x30, + BusLogic_SCSIParityErrorDetected = 0x34 +} PACKED; + + +/* + Define the SCSI Target Device Status Codes. +*/ + +enum BusLogic_TargetDeviceStatus { + BusLogic_OperationGood = 0x00, + BusLogic_CheckCondition = 0x02, + BusLogic_DeviceBusy = 0x08 +} PACKED; + +/* + Define the Queue Tag Codes. +*/ + +enum BusLogic_QueueTag { + BusLogic_SimpleQueueTag = 0, + BusLogic_HeadOfQueueTag = 1, + BusLogic_OrderedQueueTag = 2, + BusLogic_ReservedQT = 3 +}; + +/* + Define the SCSI Command Descriptor Block (CDB). +*/ + +#define BusLogic_CDB_MaxLength 12 + +typedef unsigned char SCSI_CDB_T[BusLogic_CDB_MaxLength]; + + +/* + Define the Scatter/Gather Segment structure required by the MultiMaster + Firmware Interface and the FlashPoint SCCB Manager. +*/ + +struct BusLogic_ScatterGatherSegment { + u32 SegmentByteCount; /* Bytes 0-3 */ + u32 SegmentDataPointer; /* Bytes 4-7 */ +}; + +/* + Define the Driver CCB Status Codes. +*/ + +enum BusLogic_CCB_Status { + BusLogic_CCB_Free = 0, + BusLogic_CCB_Active = 1, + BusLogic_CCB_Completed = 2, + BusLogic_CCB_Reset = 3 +} PACKED; + + +/* + Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40 + bytes are defined by and common to both the MultiMaster Firmware and the + FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint + SCCB Manager. The remaining components are defined by the Linux BusLogic + Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode + CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to + byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory, + Extended LUN Format CCBs can support up to 64 Logical Units, but in practice + many devices will respond improperly to Logical Units between 32 and 63, and + the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs + are used by recent versions of the MultiMaster Firmware, as well as by the + FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical + Units. Since 64 Logical Units are unlikely to be needed in practice, and + since they are problematic for the above reasons, and since limiting them to + 5 bits simplifies the CCB structure definition, this driver only supports + 32 Logical Units per Target Device. +*/ + +struct BusLogic_CCB { + /* + MultiMaster Firmware and FlashPoint SCCB Manager Common Portion. + */ + enum BusLogic_CCB_Opcode Opcode; /* Byte 0 */ + unsigned char:3; /* Byte 1 Bits 0-2 */ + enum BusLogic_DataDirection DataDirection:2; /* Byte 1 Bits 3-4 */ + boolean TagEnable:1; /* Byte 1 Bit 5 */ + enum BusLogic_QueueTag QueueTag:2; /* Byte 1 Bits 6-7 */ + unsigned char CDB_Length; /* Byte 2 */ + unsigned char SenseDataLength; /* Byte 3 */ + u32 DataLength; /* Bytes 4-7 */ + u32 DataPointer; /* Bytes 8-11 */ + unsigned char:8; /* Byte 12 */ + unsigned char:8; /* Byte 13 */ + enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 14 */ + enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 15 */ + unsigned char TargetID; /* Byte 16 */ + unsigned char LogicalUnit:5; /* Byte 17 Bits 0-4 */ + boolean LegacyTagEnable:1; /* Byte 17 Bit 5 */ + enum BusLogic_QueueTag LegacyQueueTag:2; /* Byte 17 Bits 6-7 */ + SCSI_CDB_T CDB; /* Bytes 18-29 */ + unsigned char:8; /* Byte 30 */ + unsigned char:8; /* Byte 31 */ + unsigned int:32; /* Bytes 32-35 */ + u32 SenseDataPointer; /* Bytes 36-39 */ + /* + FlashPoint SCCB Manager Defined Portion. + */ + void (*CallbackFunction) (struct BusLogic_CCB *); /* Bytes 40-43 */ + u32 BaseAddress; /* Bytes 44-47 */ + enum BusLogic_CompletionCode CompletionCode; /* Byte 48 */ +#ifndef CONFIG_SCSI_OMIT_FLASHPOINT + unsigned char:8; /* Byte 49 */ + unsigned short OS_Flags; /* Bytes 50-51 */ + unsigned char Private[48]; /* Bytes 52-99 */ +#endif + /* + BusLogic Linux Driver Defined Portion. + */ + dma_addr_t AllocationGroupHead; + unsigned int AllocationGroupSize; + u32 DMA_Handle; + enum BusLogic_CCB_Status Status; + unsigned long SerialNumber; + struct scsi_cmnd *Command; + struct BusLogic_HostAdapter *HostAdapter; + struct BusLogic_CCB *Next; + struct BusLogic_CCB *NextAll; + struct BusLogic_ScatterGatherSegment + ScatterGatherList[BusLogic_ScatterGatherLimit]; +}; + +/* + Define the 32 Bit Mode Outgoing Mailbox structure. +*/ + +struct BusLogic_OutgoingMailbox { + u32 CCB; /* Bytes 0-3 */ + unsigned int:24; /* Bytes 4-6 */ + enum BusLogic_ActionCode ActionCode; /* Byte 7 */ +}; + +/* + Define the 32 Bit Mode Incoming Mailbox structure. +*/ + +struct BusLogic_IncomingMailbox { + u32 CCB; /* Bytes 0-3 */ + enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 4 */ + enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 5 */ + unsigned char:8; /* Byte 6 */ + enum BusLogic_CompletionCode CompletionCode; /* Byte 7 */ +}; + + +/* + Define the BusLogic Driver Options structure. +*/ + +struct BusLogic_DriverOptions { + unsigned short TaggedQueuingPermitted; + unsigned short TaggedQueuingPermittedMask; + unsigned short BusSettleTime; + struct BusLogic_LocalOptions LocalOptions; + unsigned char CommonQueueDepth; + unsigned char QueueDepth[BusLogic_MaxTargetDevices]; +}; + +/* + Define the Host Adapter Target Flags structure. +*/ + +struct BusLogic_TargetFlags { + boolean TargetExists:1; + boolean TaggedQueuingSupported:1; + boolean WideTransfersSupported:1; + boolean TaggedQueuingActive:1; + boolean WideTransfersActive:1; + boolean CommandSuccessfulFlag:1; + boolean TargetInfoReported:1; +}; + +/* + Define the Host Adapter Target Statistics structure. +*/ + +#define BusLogic_SizeBuckets 10 + +typedef unsigned int BusLogic_CommandSizeBuckets_T[BusLogic_SizeBuckets]; + +struct BusLogic_TargetStatistics { + unsigned int CommandsAttempted; + unsigned int CommandsCompleted; + unsigned int ReadCommands; + unsigned int WriteCommands; + struct BusLogic_ByteCounter TotalBytesRead; + struct BusLogic_ByteCounter TotalBytesWritten; + BusLogic_CommandSizeBuckets_T ReadCommandSizeBuckets; + BusLogic_CommandSizeBuckets_T WriteCommandSizeBuckets; + unsigned short CommandAbortsRequested; + unsigned short CommandAbortsAttempted; + unsigned short CommandAbortsCompleted; + unsigned short BusDeviceResetsRequested; + unsigned short BusDeviceResetsAttempted; + unsigned short BusDeviceResetsCompleted; + unsigned short HostAdapterResetsRequested; + unsigned short HostAdapterResetsAttempted; + unsigned short HostAdapterResetsCompleted; +}; + +/* + Define the FlashPoint Card Handle data type. +*/ + +#define FlashPoint_BadCardHandle 0xFFFFFFFF + +typedef unsigned int FlashPoint_CardHandle_T; + + +/* + Define the FlashPoint Information structure. This structure is defined + by the FlashPoint SCCB Manager. +*/ + +struct FlashPoint_Info { + u32 BaseAddress; /* Bytes 0-3 */ + boolean Present; /* Byte 4 */ + unsigned char IRQ_Channel; /* Byte 5 */ + unsigned char SCSI_ID; /* Byte 6 */ + unsigned char SCSI_LUN; /* Byte 7 */ + unsigned short FirmwareRevision; /* Bytes 8-9 */ + unsigned short SynchronousPermitted; /* Bytes 10-11 */ + unsigned short FastPermitted; /* Bytes 12-13 */ + unsigned short UltraPermitted; /* Bytes 14-15 */ + unsigned short DisconnectPermitted; /* Bytes 16-17 */ + unsigned short WidePermitted; /* Bytes 18-19 */ + boolean ParityCheckingEnabled:1; /* Byte 20 Bit 0 */ + boolean HostWideSCSI:1; /* Byte 20 Bit 1 */ + boolean HostSoftReset:1; /* Byte 20 Bit 2 */ + boolean ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */ + boolean LowByteTerminated:1; /* Byte 20 Bit 4 */ + boolean HighByteTerminated:1; /* Byte 20 Bit 5 */ + boolean ReportDataUnderrun:1; /* Byte 20 Bit 6 */ + boolean SCAM_Enabled:1; /* Byte 20 Bit 7 */ + boolean SCAM_Level2:1; /* Byte 21 Bit 0 */ + unsigned char:7; /* Byte 21 Bits 1-7 */ + unsigned char Family; /* Byte 22 */ + unsigned char BusType; /* Byte 23 */ + unsigned char ModelNumber[3]; /* Bytes 24-26 */ + unsigned char RelativeCardNumber; /* Byte 27 */ + unsigned char Reserved[4]; /* Bytes 28-31 */ + unsigned int OS_Reserved; /* Bytes 32-35 */ + unsigned char TranslationInfo[4]; /* Bytes 36-39 */ + unsigned int Reserved2[5]; /* Bytes 40-59 */ + unsigned int SecondaryRange; /* Bytes 60-63 */ +}; + +/* + Define the BusLogic Driver Host Adapter structure. +*/ + +struct BusLogic_HostAdapter { + struct Scsi_Host *SCSI_Host; + struct pci_dev *PCI_Device; + enum BusLogic_HostAdapterType HostAdapterType; + enum BusLogic_HostAdapterBusType HostAdapterBusType; + unsigned long IO_Address; + unsigned long PCI_Address; + unsigned short AddressCount; + unsigned char HostNumber; + unsigned char ModelName[9]; + unsigned char FirmwareVersion[6]; + unsigned char FullModelName[18]; + unsigned char Bus; + unsigned char Device; + unsigned char IRQ_Channel; + unsigned char DMA_Channel; + unsigned char SCSI_ID; + boolean IRQ_ChannelAcquired:1; + boolean DMA_ChannelAcquired:1; + boolean ExtendedTranslationEnabled:1; + boolean ParityCheckingEnabled:1; + boolean BusResetEnabled:1; + boolean LevelSensitiveInterrupt:1; + boolean HostWideSCSI:1; + boolean HostDifferentialSCSI:1; + boolean HostSupportsSCAM:1; + boolean HostUltraSCSI:1; + boolean ExtendedLUNSupport:1; + boolean TerminationInfoValid:1; + boolean LowByteTerminated:1; + boolean HighByteTerminated:1; + boolean BounceBuffersRequired:1; + boolean StrictRoundRobinModeSupport:1; + boolean SCAM_Enabled:1; + boolean SCAM_Level2:1; + boolean HostAdapterInitialized:1; + boolean HostAdapterExternalReset:1; + boolean HostAdapterInternalError:1; + boolean ProcessCompletedCCBsActive; + volatile boolean HostAdapterCommandCompleted; + unsigned short HostAdapterScatterGatherLimit; + unsigned short DriverScatterGatherLimit; + unsigned short MaxTargetDevices; + unsigned short MaxLogicalUnits; + unsigned short MailboxCount; + unsigned short InitialCCBs; + unsigned short IncrementalCCBs; + unsigned short AllocatedCCBs; + unsigned short DriverQueueDepth; + unsigned short HostAdapterQueueDepth; + unsigned short UntaggedQueueDepth; + unsigned short CommonQueueDepth; + unsigned short BusSettleTime; + unsigned short SynchronousPermitted; + unsigned short FastPermitted; + unsigned short UltraPermitted; + unsigned short WidePermitted; + unsigned short DisconnectPermitted; + unsigned short TaggedQueuingPermitted; + unsigned short ExternalHostAdapterResets; + unsigned short HostAdapterInternalErrors; + unsigned short TargetDeviceCount; + unsigned short MessageBufferLength; + u32 BIOS_Address; + struct BusLogic_DriverOptions *DriverOptions; + struct FlashPoint_Info FlashPointInfo; + FlashPoint_CardHandle_T CardHandle; + struct list_head host_list; + struct BusLogic_CCB *All_CCBs; + struct BusLogic_CCB *Free_CCBs; + struct BusLogic_CCB *FirstCompletedCCB; + struct BusLogic_CCB *LastCompletedCCB; + struct BusLogic_CCB *BusDeviceResetPendingCCB[BusLogic_MaxTargetDevices]; + struct BusLogic_TargetFlags TargetFlags[BusLogic_MaxTargetDevices]; + unsigned char QueueDepth[BusLogic_MaxTargetDevices]; + unsigned char SynchronousPeriod[BusLogic_MaxTargetDevices]; + unsigned char SynchronousOffset[BusLogic_MaxTargetDevices]; + unsigned char ActiveCommands[BusLogic_MaxTargetDevices]; + unsigned int CommandsSinceReset[BusLogic_MaxTargetDevices]; + unsigned long LastSequencePoint[BusLogic_MaxTargetDevices]; + unsigned long LastResetAttempted[BusLogic_MaxTargetDevices]; + unsigned long LastResetCompleted[BusLogic_MaxTargetDevices]; + struct BusLogic_OutgoingMailbox *FirstOutgoingMailbox; + struct BusLogic_OutgoingMailbox *LastOutgoingMailbox; + struct BusLogic_OutgoingMailbox *NextOutgoingMailbox; + struct BusLogic_IncomingMailbox *FirstIncomingMailbox; + struct BusLogic_IncomingMailbox *LastIncomingMailbox; + struct BusLogic_IncomingMailbox *NextIncomingMailbox; + struct BusLogic_TargetStatistics TargetStatistics[BusLogic_MaxTargetDevices]; + unsigned char *MailboxSpace; + dma_addr_t MailboxSpaceHandle; + unsigned int MailboxSize; + unsigned long CCB_Offset; + char MessageBuffer[BusLogic_MessageBufferSize]; +}; + +/* + Define a structure for the BIOS Disk Parameters. +*/ + +struct BIOS_DiskParameters { + int Heads; + int Sectors; + int Cylinders; +}; + +/* + Define a structure for the SCSI Inquiry command results. +*/ + +struct SCSI_Inquiry { + unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */ + unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */ + unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */ + boolean RMB:1; /* Byte 1 Bit 7 */ + unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */ + unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */ + unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */ + unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */ + unsigned char:2; /* Byte 3 Bits 4-5 */ + boolean TrmIOP:1; /* Byte 3 Bit 6 */ + boolean AENC:1; /* Byte 3 Bit 7 */ + unsigned char AdditionalLength; /* Byte 4 */ + unsigned char:8; /* Byte 5 */ + unsigned char:8; /* Byte 6 */ + boolean SftRe:1; /* Byte 7 Bit 0 */ + boolean CmdQue:1; /* Byte 7 Bit 1 */ + boolean:1; /* Byte 7 Bit 2 */ + boolean Linked:1; /* Byte 7 Bit 3 */ + boolean Sync:1; /* Byte 7 Bit 4 */ + boolean WBus16:1; /* Byte 7 Bit 5 */ + boolean WBus32:1; /* Byte 7 Bit 6 */ + boolean RelAdr:1; /* Byte 7 Bit 7 */ + unsigned char VendorIdentification[8]; /* Bytes 8-15 */ + unsigned char ProductIdentification[16]; /* Bytes 16-31 */ + unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */ +}; + + +/* + Define functions to provide an abstraction for reading and writing the + Host Adapter I/O Registers. +*/ + +static inline void BusLogic_SCSIBusReset(struct BusLogic_HostAdapter *HostAdapter) +{ + union BusLogic_ControlRegister ControlRegister; + ControlRegister.All = 0; + ControlRegister.cr.SCSIBusReset = true; + outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset); +} + +static inline void BusLogic_InterruptReset(struct BusLogic_HostAdapter *HostAdapter) +{ + union BusLogic_ControlRegister ControlRegister; + ControlRegister.All = 0; + ControlRegister.cr.InterruptReset = true; + outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset); +} + +static inline void BusLogic_SoftReset(struct BusLogic_HostAdapter *HostAdapter) +{ + union BusLogic_ControlRegister ControlRegister; + ControlRegister.All = 0; + ControlRegister.cr.SoftReset = true; + outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset); +} + +static inline void BusLogic_HardReset(struct BusLogic_HostAdapter *HostAdapter) +{ + union BusLogic_ControlRegister ControlRegister; + ControlRegister.All = 0; + ControlRegister.cr.HardReset = true; + outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset); +} + +static inline unsigned char BusLogic_ReadStatusRegister(struct BusLogic_HostAdapter *HostAdapter) +{ + return inb(HostAdapter->IO_Address + BusLogic_StatusRegisterOffset); +} + +static inline void BusLogic_WriteCommandParameterRegister(struct BusLogic_HostAdapter + *HostAdapter, unsigned char Value) +{ + outb(Value, HostAdapter->IO_Address + BusLogic_CommandParameterRegisterOffset); +} + +static inline unsigned char BusLogic_ReadDataInRegister(struct BusLogic_HostAdapter *HostAdapter) +{ + return inb(HostAdapter->IO_Address + BusLogic_DataInRegisterOffset); +} + +static inline unsigned char BusLogic_ReadInterruptRegister(struct BusLogic_HostAdapter *HostAdapter) +{ + return inb(HostAdapter->IO_Address + BusLogic_InterruptRegisterOffset); +} + +static inline unsigned char BusLogic_ReadGeometryRegister(struct BusLogic_HostAdapter *HostAdapter) +{ + return inb(HostAdapter->IO_Address + BusLogic_GeometryRegisterOffset); +} + +/* + BusLogic_StartMailboxCommand issues an Execute Mailbox Command, which + notifies the Host Adapter that an entry has been made in an Outgoing + Mailbox. +*/ + +static inline void BusLogic_StartMailboxCommand(struct BusLogic_HostAdapter *HostAdapter) +{ + BusLogic_WriteCommandParameterRegister(HostAdapter, BusLogic_ExecuteMailboxCommand); +} + +/* + BusLogic_Delay waits for Seconds to elapse. +*/ + +static inline void BusLogic_Delay(int Seconds) +{ + mdelay(1000 * Seconds); +} + +/* + Virtual_to_Bus and Bus_to_Virtual map between Kernel Virtual Addresses + and PCI/VLB/EISA/ISA Bus Addresses. +*/ + +static inline u32 Virtual_to_Bus(void *VirtualAddress) +{ + return (u32) virt_to_bus(VirtualAddress); +} + +static inline void *Bus_to_Virtual(u32 BusAddress) +{ + return (void *) bus_to_virt(BusAddress); +} + +/* + Virtual_to_32Bit_Virtual maps between Kernel Virtual Addresses and + 32 bit Kernel Virtual Addresses. This avoids compilation warnings + on 64 bit architectures. +*/ + +static inline u32 Virtual_to_32Bit_Virtual(void *VirtualAddress) +{ + return (u32) (unsigned long) VirtualAddress; +} + +/* + BusLogic_IncrementErrorCounter increments Error Counter by 1, stopping at + 65535 rather than wrapping around to 0. +*/ + +static inline void BusLogic_IncrementErrorCounter(unsigned short *ErrorCounter) +{ + if (*ErrorCounter < 65535) + (*ErrorCounter)++; +} + +/* + BusLogic_IncrementByteCounter increments Byte Counter by Amount. +*/ + +static inline void BusLogic_IncrementByteCounter(struct BusLogic_ByteCounter + *ByteCounter, unsigned int Amount) +{ + ByteCounter->Units += Amount; + if (ByteCounter->Units > 999999999) { + ByteCounter->Units -= 1000000000; + ByteCounter->Billions++; + } +} + +/* + BusLogic_IncrementSizeBucket increments the Bucket for Amount. +*/ + +static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T CommandSizeBuckets, unsigned int Amount) +{ + int Index = 0; + if (Amount < 8 * 1024) { + if (Amount < 2 * 1024) + Index = (Amount < 1 * 1024 ? 0 : 1); + else + Index = (Amount < 4 * 1024 ? 2 : 3); + } else if (Amount < 128 * 1024) { + if (Amount < 32 * 1024) + Index = (Amount < 16 * 1024 ? 4 : 5); + else + Index = (Amount < 64 * 1024 ? 6 : 7); + } else + Index = (Amount < 256 * 1024 ? 8 : 9); + CommandSizeBuckets[Index]++; +} + +/* + Define the version number of the FlashPoint Firmware (SCCB Manager). +*/ + +#define FlashPoint_FirmwareVersion "5.02" + +/* + Define the possible return values from FlashPoint_HandleInterrupt. +*/ + +#define FlashPoint_NormalInterrupt 0x00 +#define FlashPoint_InternalError 0xFE +#define FlashPoint_ExternalBusReset 0xFF + +/* + Define prototypes for the forward referenced BusLogic Driver + Internal Functions. +*/ + +static const char *BusLogic_DriverInfo(struct Scsi_Host *); +static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *)); +static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *); +static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int); +static int BusLogic_SlaveConfigure(struct scsi_device *); +static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *); +static irqreturn_t BusLogic_InterruptHandler(int, void *, struct pt_regs *); +static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, boolean HardReset); +static void BusLogic_Message(enum BusLogic_MessageLevel, char *, struct BusLogic_HostAdapter *, ...); +static int __init BusLogic_Setup(char *); + +#endif /* _BUSLOGIC_H */ |