diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/initio.h | |
download | kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/initio.h')
-rw-r--r-- | drivers/scsi/initio.h | 739 |
1 files changed, 739 insertions, 0 deletions
diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h new file mode 100644 index 0000000..df3ed7c --- /dev/null +++ b/drivers/scsi/initio.h @@ -0,0 +1,739 @@ +/************************************************************************** + * Initio 9100 device driver for Linux. + * + * Copyright (c) 1994-1998 Initio Corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * -------------------------------------------------------------------------- + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Where this Software is combined with software released under the terms of + * the GNU General Public License ("GPL") and the terms of the GPL would require the + * combined work to also be released under the terms of the GPL, the terms + * and conditions of this License will apply in addition to those of the + * GPL with the exception of any terms or conditions of this License that + * conflict with, or are expressly prohibited by, the GPL. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + **************************************************************************/ + + +#include <linux/config.h> +#include <linux/types.h> + +#define ULONG unsigned long +#define USHORT unsigned short +#define UCHAR unsigned char +#define BYTE unsigned char +#define WORD unsigned short +#define DWORD unsigned long +#define UBYTE unsigned char +#define UWORD unsigned short +#define UDWORD unsigned long +#define U32 u32 + +#define TOTAL_SG_ENTRY 32 +#define MAX_SUPPORTED_ADAPTERS 8 +#define MAX_OFFSET 15 +#define MAX_TARGETS 16 + +typedef struct { + unsigned short base; + unsigned short vec; +} i91u_config; + +/***************************************/ +/* Tulip Configuration Register Set */ +/***************************************/ +#define TUL_PVID 0x00 /* Vendor ID */ +#define TUL_PDID 0x02 /* Device ID */ +#define TUL_PCMD 0x04 /* Command */ +#define TUL_PSTUS 0x06 /* Status */ +#define TUL_PRID 0x08 /* Revision number */ +#define TUL_PPI 0x09 /* Programming interface */ +#define TUL_PSC 0x0A /* Sub Class */ +#define TUL_PBC 0x0B /* Base Class */ +#define TUL_PCLS 0x0C /* Cache line size */ +#define TUL_PLTR 0x0D /* Latency timer */ +#define TUL_PHDT 0x0E /* Header type */ +#define TUL_PBIST 0x0F /* BIST */ +#define TUL_PBAD 0x10 /* Base address */ +#define TUL_PBAD1 0x14 /* Base address */ +#define TUL_PBAD2 0x18 /* Base address */ +#define TUL_PBAD3 0x1C /* Base address */ +#define TUL_PBAD4 0x20 /* Base address */ +#define TUL_PBAD5 0x24 /* Base address */ +#define TUL_PRSVD 0x28 /* Reserved */ +#define TUL_PRSVD1 0x2C /* Reserved */ +#define TUL_PRAD 0x30 /* Expansion ROM base address */ +#define TUL_PRSVD2 0x34 /* Reserved */ +#define TUL_PRSVD3 0x38 /* Reserved */ +#define TUL_PINTL 0x3C /* Interrupt line */ +#define TUL_PINTP 0x3D /* Interrupt pin */ +#define TUL_PIGNT 0x3E /* MIN_GNT */ +#define TUL_PMGNT 0x3F /* MAX_GNT */ + +/************************/ +/* Jasmin Register Set */ +/************************/ +#define TUL_HACFG0 0x40 /* H/A Configuration Register 0 */ +#define TUL_HACFG1 0x41 /* H/A Configuration Register 1 */ +#define TUL_HACFG2 0x42 /* H/A Configuration Register 2 */ + +#define TUL_SDCFG0 0x44 /* SCSI Device Configuration 0 */ +#define TUL_SDCFG1 0x45 /* SCSI Device Configuration 1 */ +#define TUL_SDCFG2 0x46 /* SCSI Device Configuration 2 */ +#define TUL_SDCFG3 0x47 /* SCSI Device Configuration 3 */ + +#define TUL_GINTS 0x50 /* Global Interrupt Status Register */ +#define TUL_GIMSK 0x52 /* Global Interrupt MASK Register */ +#define TUL_GCTRL 0x54 /* Global Control Register */ +#define TUL_GCTRL_EEPROM_BIT 0x04 +#define TUL_GCTRL1 0x55 /* Global Control Register */ +#define TUL_DMACFG 0x5B /* DMA configuration */ +#define TUL_NVRAM 0x5D /* Non-volatile RAM port */ + +#define TUL_SCnt0 0x80 /* 00 R/W Transfer Counter Low */ +#define TUL_SCnt1 0x81 /* 01 R/W Transfer Counter Mid */ +#define TUL_SCnt2 0x82 /* 02 R/W Transfer Count High */ +#define TUL_SFifoCnt 0x83 /* 03 R FIFO counter */ +#define TUL_SIntEnable 0x84 /* 03 W Interrupt enble */ +#define TUL_SInt 0x84 /* 04 R Interrupt Register */ +#define TUL_SCtrl0 0x85 /* 05 W Control 0 */ +#define TUL_SStatus0 0x85 /* 05 R Status 0 */ +#define TUL_SCtrl1 0x86 /* 06 W Control 1 */ +#define TUL_SStatus1 0x86 /* 06 R Status 1 */ +#define TUL_SConfig 0x87 /* 07 W Configuration */ +#define TUL_SStatus2 0x87 /* 07 R Status 2 */ +#define TUL_SPeriod 0x88 /* 08 W Sync. Transfer Period & Offset */ +#define TUL_SOffset 0x88 /* 08 R Offset */ +#define TUL_SScsiId 0x89 /* 09 W SCSI ID */ +#define TUL_SBusId 0x89 /* 09 R SCSI BUS ID */ +#define TUL_STimeOut 0x8A /* 0A W Sel/Resel Time Out Register */ +#define TUL_SIdent 0x8A /* 0A R Identify Message Register */ +#define TUL_SAvail 0x8A /* 0A R Availiable Counter Register */ +#define TUL_SData 0x8B /* 0B R/W SCSI data in/out */ +#define TUL_SFifo 0x8C /* 0C R/W FIFO */ +#define TUL_SSignal 0x90 /* 10 R/W SCSI signal in/out */ +#define TUL_SCmd 0x91 /* 11 R/W Command */ +#define TUL_STest0 0x92 /* 12 R/W Test0 */ +#define TUL_STest1 0x93 /* 13 R/W Test1 */ +#define TUL_SCFG1 0x94 /* 14 R/W Configuration */ + +#define TUL_XAddH 0xC0 /*DMA Transfer Physical Address */ +#define TUL_XAddW 0xC8 /*DMA Current Transfer Physical Address */ +#define TUL_XCntH 0xD0 /*DMA Transfer Counter */ +#define TUL_XCntW 0xD4 /*DMA Current Transfer Counter */ +#define TUL_XCmd 0xD8 /*DMA Command Register */ +#define TUL_Int 0xDC /*Interrupt Register */ +#define TUL_XStatus 0xDD /*DMA status Register */ +#define TUL_Mask 0xE0 /*Interrupt Mask Register */ +#define TUL_XCtrl 0xE4 /*DMA Control Register */ +#define TUL_XCtrl1 0xE5 /*DMA Control Register 1 */ +#define TUL_XFifo 0xE8 /*DMA FIFO */ + +#define TUL_WCtrl 0xF7 /*Bus master wait state control */ +#define TUL_DCtrl 0xFB /*DMA delay control */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Command register of Configuration Space Header */ +/*----------------------------------------------------------------------*/ +#define BUSMS 0x04 /* BUS MASTER Enable */ +#define IOSPA 0x01 /* IO Space Enable */ + +/*----------------------------------------------------------------------*/ +/* Command Codes of Tulip SCSI Command register */ +/*----------------------------------------------------------------------*/ +#define TSC_EN_RESEL 0x80 /* Enable Reselection */ +#define TSC_CMD_COMP 0x84 /* Command Complete Sequence */ +#define TSC_SEL 0x01 /* Select Without ATN Sequence */ +#define TSC_SEL_ATN 0x11 /* Select With ATN Sequence */ +#define TSC_SEL_ATN_DMA 0x51 /* Select With ATN Sequence with DMA */ +#define TSC_SEL_ATN3 0x31 /* Select With ATN3 Sequence */ +#define TSC_SEL_ATNSTOP 0x12 /* Select With ATN and Stop Sequence */ +#define TSC_SELATNSTOP 0x1E /* Select With ATN and Stop Sequence */ + +#define TSC_SEL_ATN_DIRECT_IN 0x95 /* Select With ATN Sequence */ +#define TSC_SEL_ATN_DIRECT_OUT 0x15 /* Select With ATN Sequence */ +#define TSC_SEL_ATN3_DIRECT_IN 0xB5 /* Select With ATN3 Sequence */ +#define TSC_SEL_ATN3_DIRECT_OUT 0x35 /* Select With ATN3 Sequence */ +#define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Infomation out */ +#define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Infomation in */ + +#define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Infomation out */ +#define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Infomation in */ +#define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Infomation out */ +#define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Infomation in */ + +#define TSC_MSG_ACCEPT 0x0F /* Message Accept */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Control 0 Register */ +/*----------------------------------------------------------------------*/ +#define TSC_RST_SEQ 0x20 /* Reset sequence counter */ +#define TSC_FLUSH_FIFO 0x10 /* Flush FIFO */ +#define TSC_ABT_CMD 0x04 /* Abort command (sequence) */ +#define TSC_RST_CHIP 0x02 /* Reset SCSI Chip */ +#define TSC_RST_BUS 0x01 /* Reset SCSI Bus */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Control 1 Register */ +/*----------------------------------------------------------------------*/ +#define TSC_EN_SCAM 0x80 /* Enable SCAM */ +#define TSC_TIMER 0x40 /* Select timeout unit */ +#define TSC_EN_SCSI2 0x20 /* SCSI-2 mode */ +#define TSC_PWDN 0x10 /* Power down mode */ +#define TSC_WIDE_CPU 0x08 /* Wide CPU */ +#define TSC_HW_RESELECT 0x04 /* Enable HW reselect */ +#define TSC_EN_BUS_OUT 0x02 /* Enable SCSI data bus out latch */ +#define TSC_EN_BUS_IN 0x01 /* Enable SCSI data bus in latch */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Configuration Register */ +/*----------------------------------------------------------------------*/ +#define TSC_EN_LATCH 0x80 /* Enable phase latch */ +#define TSC_INITIATOR 0x40 /* Initiator mode */ +#define TSC_EN_SCSI_PAR 0x20 /* Enable SCSI parity */ +#define TSC_DMA_8BIT 0x10 /* Alternate dma 8-bits mode */ +#define TSC_DMA_16BIT 0x08 /* Alternate dma 16-bits mode */ +#define TSC_EN_WDACK 0x04 /* Enable DACK while wide SCSI xfer */ +#define TSC_ALT_PERIOD 0x02 /* Alternate sync period mode */ +#define TSC_DIS_SCSIRST 0x01 /* Disable SCSI bus reset us */ + +#define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST) + +#define TSC_WIDE_SCSI 0x80 /* Enable Wide SCSI */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI signal Register */ +/*----------------------------------------------------------------------*/ +#define TSC_RST_ACK 0x00 /* Release ACK signal */ +#define TSC_RST_ATN 0x00 /* Release ATN signal */ +#define TSC_RST_BSY 0x00 /* Release BSY signal */ + +#define TSC_SET_ACK 0x40 /* ACK signal */ +#define TSC_SET_ATN 0x08 /* ATN signal */ + +#define TSC_REQI 0x80 /* REQ signal */ +#define TSC_ACKI 0x40 /* ACK signal */ +#define TSC_BSYI 0x20 /* BSY signal */ +#define TSC_SELI 0x10 /* SEL signal */ +#define TSC_ATNI 0x08 /* ATN signal */ +#define TSC_MSGI 0x04 /* MSG signal */ +#define TSC_CDI 0x02 /* C/D signal */ +#define TSC_IOI 0x01 /* I/O signal */ + + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Status 0 Register */ +/*----------------------------------------------------------------------*/ +#define TSS_INT_PENDING 0x80 /* Interrupt pending */ +#define TSS_SEQ_ACTIVE 0x40 /* Sequencer active */ +#define TSS_XFER_CNT 0x20 /* Transfer counter zero */ +#define TSS_FIFO_EMPTY 0x10 /* FIFO empty */ +#define TSS_PAR_ERROR 0x08 /* SCSI parity error */ +#define TSS_PH_MASK 0x07 /* SCSI phase mask */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Status 1 Register */ +/*----------------------------------------------------------------------*/ +#define TSS_STATUS_RCV 0x08 /* Status received */ +#define TSS_MSG_SEND 0x40 /* Message sent */ +#define TSS_CMD_PH_CMP 0x20 /* command phase done */ +#define TSS_DATA_PH_CMP 0x10 /* Data phase done */ +#define TSS_STATUS_SEND 0x08 /* Status sent */ +#define TSS_XFER_CMP 0x04 /* Transfer completed */ +#define TSS_SEL_CMP 0x02 /* Selection completed */ +#define TSS_ARB_CMP 0x01 /* Arbitration completed */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Status 2 Register */ +/*----------------------------------------------------------------------*/ +#define TSS_CMD_ABTED 0x80 /* Command aborted */ +#define TSS_OFFSET_0 0x40 /* Offset counter zero */ +#define TSS_FIFO_FULL 0x20 /* FIFO full */ +#define TSS_TIMEOUT_0 0x10 /* Timeout counter zero */ +#define TSS_BUSY_RLS 0x08 /* Busy release */ +#define TSS_PH_MISMATCH 0x04 /* Phase mismatch */ +#define TSS_SCSI_BUS_EN 0x02 /* SCSI data bus enable */ +#define TSS_SCSIRST 0x01 /* SCSI bus reset in progress */ + +/*----------------------------------------------------------------------*/ +/* bit definition for Tulip SCSI Interrupt Register */ +/*----------------------------------------------------------------------*/ +#define TSS_RESEL_INT 0x80 /* Reselected interrupt */ +#define TSS_SEL_TIMEOUT 0x40 /* Selected/reselected timeout */ +#define TSS_BUS_SERV 0x20 +#define TSS_SCSIRST_INT 0x10 /* SCSI bus reset detected */ +#define TSS_DISC_INT 0x08 /* Disconnected interrupt */ +#define TSS_SEL_INT 0x04 /* Select interrupt */ +#define TSS_SCAM_SEL 0x02 /* SCAM selected */ +#define TSS_FUNC_COMP 0x01 + +/*----------------------------------------------------------------------*/ +/* SCSI Phase Codes. */ +/*----------------------------------------------------------------------*/ +#define DATA_OUT 0 +#define DATA_IN 1 /* 4 */ +#define CMD_OUT 2 +#define STATUS_IN 3 /* 6 */ +#define MSG_OUT 6 /* 3 */ +#define MSG_IN 7 + + + +/*----------------------------------------------------------------------*/ +/* Command Codes of Tulip xfer Command register */ +/*----------------------------------------------------------------------*/ +#define TAX_X_FORC 0x02 +#define TAX_X_ABT 0x04 +#define TAX_X_CLR_FIFO 0x08 + +#define TAX_X_IN 0x21 +#define TAX_X_OUT 0x01 +#define TAX_SG_IN 0xA1 +#define TAX_SG_OUT 0x81 + +/*----------------------------------------------------------------------*/ +/* Tulip Interrupt Register */ +/*----------------------------------------------------------------------*/ +#define XCMP 0x01 +#define FCMP 0x02 +#define XABT 0x04 +#define XERR 0x08 +#define SCMP 0x10 +#define IPEND 0x80 + +/*----------------------------------------------------------------------*/ +/* Tulip DMA Status Register */ +/*----------------------------------------------------------------------*/ +#define XPEND 0x01 /* Transfer pending */ +#define FEMPTY 0x02 /* FIFO empty */ + + + +/*----------------------------------------------------------------------*/ +/* bit definition for TUL_GCTRL */ +/*----------------------------------------------------------------------*/ +#define EXTSG 0x80 +#define EXTAD 0x60 +#define SEG4K 0x08 +#define EEPRG 0x04 +#define MRMUL 0x02 + +/*----------------------------------------------------------------------*/ +/* bit definition for TUL_NVRAM */ +/*----------------------------------------------------------------------*/ +#define SE2CS 0x08 +#define SE2CLK 0x04 +#define SE2DO 0x02 +#define SE2DI 0x01 + + +/************************************************************************/ +/* Scatter-Gather Element Structure */ +/************************************************************************/ +typedef struct SG_Struc { + U32 SG_Ptr; /* Data Pointer */ + U32 SG_Len; /* Data Length */ +} SG; + +/*********************************************************************** + SCSI Control Block +************************************************************************/ +typedef struct Scsi_Ctrl_Blk { + struct Scsi_Ctrl_Blk *SCB_NxtScb; + UBYTE SCB_Status; /*4 */ + UBYTE SCB_NxtStat; /*5 */ + UBYTE SCB_Mode; /*6 */ + UBYTE SCB_Msgin; /*7 SCB_Res0 */ + UWORD SCB_SGIdx; /*8 */ + UWORD SCB_SGMax; /*A */ +#ifdef ALPHA + U32 SCB_Reserved[2]; /*C */ +#else + U32 SCB_Reserved[3]; /*C */ +#endif + + U32 SCB_XferLen; /*18 Current xfer len */ + U32 SCB_TotXLen; /*1C Total xfer len */ + U32 SCB_PAddr; /*20 SCB phy. Addr. */ + + UBYTE SCB_Opcode; /*24 SCB command code */ + UBYTE SCB_Flags; /*25 SCB Flags */ + UBYTE SCB_Target; /*26 Target Id */ + UBYTE SCB_Lun; /*27 Lun */ + U32 SCB_BufPtr; /*28 Data Buffer Pointer */ + U32 SCB_BufLen; /*2C Data Allocation Length */ + UBYTE SCB_SGLen; /*30 SG list # */ + UBYTE SCB_SenseLen; /*31 Sense Allocation Length */ + UBYTE SCB_HaStat; /*32 */ + UBYTE SCB_TaStat; /*33 */ + UBYTE SCB_CDBLen; /*34 CDB Length */ + UBYTE SCB_Ident; /*35 Identify */ + UBYTE SCB_TagMsg; /*36 Tag Message */ + UBYTE SCB_TagId; /*37 Queue Tag */ + UBYTE SCB_CDB[12]; /*38 */ + U32 SCB_SGPAddr; /*44 SG List/Sense Buf phy. Addr. */ + U32 SCB_SensePtr; /*48 Sense data pointer */ + void (*SCB_Post) (BYTE *, BYTE *); /*4C POST routine */ + struct scsi_cmnd *SCB_Srb; /*50 SRB Pointer */ + SG SCB_SGList[TOTAL_SG_ENTRY]; /*54 Start of SG list */ +} SCB; + +/* Bit Definition for SCB_Status */ +#define SCB_RENT 0x01 +#define SCB_PEND 0x02 +#define SCB_CONTIG 0x04 /* Contigent Allegiance */ +#define SCB_SELECT 0x08 +#define SCB_BUSY 0x10 +#define SCB_DONE 0x20 + + +/* Opcodes of SCB_Opcode */ +#define ExecSCSI 0x1 +#define BusDevRst 0x2 +#define AbortCmd 0x3 + + +/* Bit Definition for SCB_Mode */ +#define SCM_RSENS 0x01 /* request sense mode */ + + +/* Bit Definition for SCB_Flags */ +#define SCF_DONE 0x01 +#define SCF_POST 0x02 +#define SCF_SENSE 0x04 +#define SCF_DIR 0x18 +#define SCF_NO_DCHK 0x00 +#define SCF_DIN 0x08 +#define SCF_DOUT 0x10 +#define SCF_NO_XF 0x18 +#define SCF_WR_VF 0x20 /* Write verify turn on */ +#define SCF_POLL 0x40 +#define SCF_SG 0x80 + +/* Error Codes for SCB_HaStat */ +#define HOST_SEL_TOUT 0x11 +#define HOST_DO_DU 0x12 +#define HOST_BUS_FREE 0x13 +#define HOST_BAD_PHAS 0x14 +#define HOST_INV_CMD 0x16 +#define HOST_ABORTED 0x1A /* 07/21/98 */ +#define HOST_SCSI_RST 0x1B +#define HOST_DEV_RST 0x1C + +/* Error Codes for SCB_TaStat */ +#define TARGET_CHKCOND 0x02 +#define TARGET_BUSY 0x08 +#define INI_QUEUE_FULL 0x28 + +/* SCSI MESSAGE */ +#define MSG_COMP 0x00 +#define MSG_EXTEND 0x01 +#define MSG_SDP 0x02 +#define MSG_RESTORE 0x03 +#define MSG_DISC 0x04 +#define MSG_IDE 0x05 +#define MSG_ABORT 0x06 +#define MSG_REJ 0x07 +#define MSG_NOP 0x08 +#define MSG_PARITY 0x09 +#define MSG_LINK_COMP 0x0A +#define MSG_LINK_FLAG 0x0B +#define MSG_DEVRST 0x0C +#define MSG_ABORT_TAG 0x0D + +/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */ +#define MSG_STAG 0x20 +#define MSG_HTAG 0x21 +#define MSG_OTAG 0x22 + +#define MSG_IGNOREWIDE 0x23 + +#define MSG_IDENT 0x80 + +/*********************************************************************** + Target Device Control Structure +**********************************************************************/ + +typedef struct Tar_Ctrl_Struc { + UWORD TCS_Flags; /* 0 */ + UBYTE TCS_JS_Period; /* 2 */ + UBYTE TCS_SConfig0; /* 3 */ + + UWORD TCS_DrvFlags; /* 4 */ + UBYTE TCS_DrvHead; /* 6 */ + UBYTE TCS_DrvSector; /* 7 */ +} TCS; + +/*********************************************************************** + Target Device Control Structure +**********************************************************************/ + +/* Bit Definition for TCF_Flags */ +#define TCF_SCSI_RATE 0x0007 +#define TCF_EN_DISC 0x0008 +#define TCF_NO_SYNC_NEGO 0x0010 +#define TCF_NO_WDTR 0x0020 +#define TCF_EN_255 0x0040 +#define TCF_EN_START 0x0080 +#define TCF_WDTR_DONE 0x0100 +#define TCF_SYNC_DONE 0x0200 +#define TCF_BUSY 0x0400 + + +/* Bit Definition for TCF_DrvFlags */ +#define TCF_DRV_BUSY 0x01 /* Indicate target busy(driver) */ +#define TCF_DRV_EN_TAG 0x0800 +#define TCF_DRV_255_63 0x0400 + +typedef struct I91u_Adpt_Struc { + UWORD ADPT_BIOS; /* 0 */ + UWORD ADPT_BASE; /* 1 */ + UBYTE ADPT_Bus; /* 2 */ + UBYTE ADPT_Device; /* 3 */ + UBYTE ADPT_INTR; /* 4 */ +} INI_ADPT_STRUCT; + + +/*********************************************************************** + Host Adapter Control Structure +************************************************************************/ +typedef struct Ha_Ctrl_Struc { + UWORD HCS_Base; /* 00 */ + UWORD HCS_BIOS; /* 02 */ + UBYTE HCS_Intr; /* 04 */ + UBYTE HCS_SCSI_ID; /* 05 */ + UBYTE HCS_MaxTar; /* 06 */ + UBYTE HCS_NumScbs; /* 07 */ + + UBYTE HCS_Flags; /* 08 */ + UBYTE HCS_Index; /* 09 */ + UBYTE HCS_HaId; /* 0A */ + UBYTE HCS_Config; /* 0B */ + UWORD HCS_IdMask; /* 0C */ + UBYTE HCS_Semaph; /* 0E */ + UBYTE HCS_Phase; /* 0F */ + UBYTE HCS_JSStatus0; /* 10 */ + UBYTE HCS_JSInt; /* 11 */ + UBYTE HCS_JSStatus1; /* 12 */ + UBYTE HCS_SConf1; /* 13 */ + + UBYTE HCS_Msg[8]; /* 14 */ + SCB *HCS_NxtAvail; /* 1C */ + SCB *HCS_Scb; /* 20 */ + SCB *HCS_ScbEnd; /* 24 */ + SCB *HCS_NxtPend; /* 28 */ + SCB *HCS_NxtContig; /* 2C */ + SCB *HCS_ActScb; /* 30 */ + TCS *HCS_ActTcs; /* 34 */ + + SCB *HCS_FirstAvail; /* 38 */ + SCB *HCS_LastAvail; /* 3C */ + SCB *HCS_FirstPend; /* 40 */ + SCB *HCS_LastPend; /* 44 */ + SCB *HCS_FirstBusy; /* 48 */ + SCB *HCS_LastBusy; /* 4C */ + SCB *HCS_FirstDone; /* 50 */ + SCB *HCS_LastDone; /* 54 */ + UBYTE HCS_MaxTags[16]; /* 58 */ + UBYTE HCS_ActTags[16]; /* 68 */ + TCS HCS_Tcs[MAX_TARGETS]; /* 78 */ + spinlock_t HCS_AvailLock; + spinlock_t HCS_SemaphLock; + struct pci_dev *pci_dev; +} HCS; + +/* Bit Definition for HCB_Config */ +#define HCC_SCSI_RESET 0x01 +#define HCC_EN_PAR 0x02 +#define HCC_ACT_TERM1 0x04 +#define HCC_ACT_TERM2 0x08 +#define HCC_AUTO_TERM 0x10 +#define HCC_EN_PWR 0x80 + +/* Bit Definition for HCB_Flags */ +#define HCF_EXPECT_DISC 0x01 +#define HCF_EXPECT_SELECT 0x02 +#define HCF_EXPECT_RESET 0x10 +#define HCF_EXPECT_DONE_DISC 0x20 + +/****************************************************************** + Serial EEProm +*******************************************************************/ + +typedef struct _NVRAM_SCSI { /* SCSI channel configuration */ + UCHAR NVM_ChSCSIID; /* 0Ch -> Channel SCSI ID */ + UCHAR NVM_ChConfig1; /* 0Dh -> Channel config 1 */ + UCHAR NVM_ChConfig2; /* 0Eh -> Channel config 2 */ + UCHAR NVM_NumOfTarg; /* 0Fh -> Number of SCSI target */ + /* SCSI target configuration */ + UCHAR NVM_Targ0Config; /* 10h -> Target 0 configuration */ + UCHAR NVM_Targ1Config; /* 11h -> Target 1 configuration */ + UCHAR NVM_Targ2Config; /* 12h -> Target 2 configuration */ + UCHAR NVM_Targ3Config; /* 13h -> Target 3 configuration */ + UCHAR NVM_Targ4Config; /* 14h -> Target 4 configuration */ + UCHAR NVM_Targ5Config; /* 15h -> Target 5 configuration */ + UCHAR NVM_Targ6Config; /* 16h -> Target 6 configuration */ + UCHAR NVM_Targ7Config; /* 17h -> Target 7 configuration */ + UCHAR NVM_Targ8Config; /* 18h -> Target 8 configuration */ + UCHAR NVM_Targ9Config; /* 19h -> Target 9 configuration */ + UCHAR NVM_TargAConfig; /* 1Ah -> Target A configuration */ + UCHAR NVM_TargBConfig; /* 1Bh -> Target B configuration */ + UCHAR NVM_TargCConfig; /* 1Ch -> Target C configuration */ + UCHAR NVM_TargDConfig; /* 1Dh -> Target D configuration */ + UCHAR NVM_TargEConfig; /* 1Eh -> Target E configuration */ + UCHAR NVM_TargFConfig; /* 1Fh -> Target F configuration */ +} NVRAM_SCSI; + +typedef struct _NVRAM { +/*----------header ---------------*/ + USHORT NVM_Signature; /* 0,1: Signature */ + UCHAR NVM_Size; /* 2: Size of data structure */ + UCHAR NVM_Revision; /* 3: Revision of data structure */ + /* ----Host Adapter Structure ---- */ + UCHAR NVM_ModelByte0; /* 4: Model number (byte 0) */ + UCHAR NVM_ModelByte1; /* 5: Model number (byte 1) */ + UCHAR NVM_ModelInfo; /* 6: Model information */ + UCHAR NVM_NumOfCh; /* 7: Number of SCSI channel */ + UCHAR NVM_BIOSConfig1; /* 8: BIOS configuration 1 */ + UCHAR NVM_BIOSConfig2; /* 9: BIOS configuration 2 */ + UCHAR NVM_HAConfig1; /* A: Hoat adapter configuration 1 */ + UCHAR NVM_HAConfig2; /* B: Hoat adapter configuration 2 */ + NVRAM_SCSI NVM_SCSIInfo[2]; + UCHAR NVM_reserved[10]; + /* ---------- CheckSum ---------- */ + USHORT NVM_CheckSum; /* 0x3E, 0x3F: Checksum of NVRam */ +} NVRAM, *PNVRAM; + +/* Bios Configuration for nvram->BIOSConfig1 */ +#define NBC1_ENABLE 0x01 /* BIOS enable */ +#define NBC1_8DRIVE 0x02 /* Support more than 2 drives */ +#define NBC1_REMOVABLE 0x04 /* Support removable drive */ +#define NBC1_INT19 0x08 /* Intercept int 19h */ +#define NBC1_BIOSSCAN 0x10 /* Dynamic BIOS scan */ +#define NBC1_LUNSUPPORT 0x40 /* Support LUN */ + +/* HA Configuration Byte 1 */ +#define NHC1_BOOTIDMASK 0x0F /* Boot ID number */ +#define NHC1_LUNMASK 0x70 /* Boot LUN number */ +#define NHC1_CHANMASK 0x80 /* Boot Channel number */ + +/* Bit definition for nvram->SCSIconfig1 */ +#define NCC1_BUSRESET 0x01 /* Reset SCSI bus at power up */ +#define NCC1_PARITYCHK 0x02 /* SCSI parity enable */ +#define NCC1_ACTTERM1 0x04 /* Enable active terminator 1 */ +#define NCC1_ACTTERM2 0x08 /* Enable active terminator 2 */ +#define NCC1_AUTOTERM 0x10 /* Enable auto terminator */ +#define NCC1_PWRMGR 0x80 /* Enable power management */ + +/* Bit definition for SCSI Target configuration byte */ +#define NTC_DISCONNECT 0x08 /* Enable SCSI disconnect */ +#define NTC_SYNC 0x10 /* SYNC_NEGO */ +#define NTC_NO_WDTR 0x20 /* SYNC_NEGO */ +#define NTC_1GIGA 0x40 /* 255 head / 63 sectors (64/32) */ +#define NTC_SPINUP 0x80 /* Start disk drive */ + +/* Default NVRam values */ +#define INI_SIGNATURE 0xC925 +#define NBC1_DEFAULT (NBC1_ENABLE) +#define NCC1_DEFAULT (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK) +#define NTC_DEFAULT (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT) + +/* SCSI related definition */ +#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ +#define DISC_ALLOW 0xC0 /* Disconnect is allowed */ +#define SCSICMD_RequestSense 0x03 + +typedef struct _HCSinfo { + ULONG base; + UCHAR vec; + UCHAR bios; /* High byte of BIOS address */ + USHORT BaseAndBios; /* high byte: pHcsInfo->bios,low byte:pHcsInfo->base */ +} HCSINFO; + +#define TUL_RD(x,y) (UCHAR)(inb( (int)((ULONG)(x+y)) )) +#define TUL_RDLONG(x,y) (ULONG)(inl((int)((ULONG)(x+y)) )) +#define TUL_WR( adr,data) outb( (UCHAR)(data), (int)(adr)) +#define TUL_WRSHORT(adr,data) outw( (UWORD)(data), (int)(adr)) +#define TUL_WRLONG( adr,data) outl( (ULONG)(data), (int)(adr)) + +#define SCSI_ABORT_SNOOZE 0 +#define SCSI_ABORT_SUCCESS 1 +#define SCSI_ABORT_PENDING 2 +#define SCSI_ABORT_BUSY 3 +#define SCSI_ABORT_NOT_RUNNING 4 +#define SCSI_ABORT_ERROR 5 + +#define SCSI_RESET_SNOOZE 0 +#define SCSI_RESET_PUNT 1 +#define SCSI_RESET_SUCCESS 2 +#define SCSI_RESET_PENDING 3 +#define SCSI_RESET_WAKEUP 4 +#define SCSI_RESET_NOT_RUNNING 5 +#define SCSI_RESET_ERROR 6 + +#define SCSI_RESET_SYNCHRONOUS 0x01 +#define SCSI_RESET_ASYNCHRONOUS 0x02 +#define SCSI_RESET_SUGGEST_BUS_RESET 0x04 +#define SCSI_RESET_SUGGEST_HOST_RESET 0x08 + +#define SCSI_RESET_BUS_RESET 0x100 +#define SCSI_RESET_HOST_RESET 0x200 +#define SCSI_RESET_ACTION 0xff + +extern void init_i91uAdapter_table(void); +extern int Addi91u_into_Adapter_table(WORD, WORD, BYTE, BYTE, BYTE); +extern int tul_ReturnNumberOfAdapters(void); +extern void get_tulipPCIConfig(HCS * pHCB, int iChannel_index); +extern int init_tulip(HCS * pHCB, SCB * pSCB, int tul_num_scb, BYTE * pbBiosAdr, int reset_time); +extern SCB *tul_alloc_scb(HCS * pHCB); +extern int tul_abort_srb(HCS * pHCB, struct scsi_cmnd * pSRB); +extern void tul_exec_scb(HCS * pHCB, SCB * pSCB); +extern void tul_release_scb(HCS * pHCB, SCB * pSCB); +extern void tul_stop_bm(HCS * pHCB); +extern int tul_reset_scsi(HCS * pCurHcb, int seconds); +extern int tul_isr(HCS * pHCB); +extern int tul_reset(HCS * pHCB, struct scsi_cmnd * pSRB, unsigned char target); +extern int tul_reset_scsi_bus(HCS * pCurHcb); +extern int tul_device_reset(HCS * pCurHcb, struct scsi_cmnd *pSrb, + unsigned int target, unsigned int ResetFlags); + /* ---- EXTERNAL VARIABLES ---- */ +extern HCS tul_hcs[]; |