diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/mac53c94.c | |
download | kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_espresso10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/mac53c94.c')
-rw-r--r-- | drivers/scsi/mac53c94.c | 582 |
1 files changed, 582 insertions, 0 deletions
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c new file mode 100644 index 0000000..3ef2a14 --- /dev/null +++ b/drivers/scsi/mac53c94.c @@ -0,0 +1,582 @@ +/* + * SCSI low-level driver for the 53c94 SCSI bus adaptor found + * on Power Macintosh computers, controlling the external SCSI chain. + * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA) + * controller. + * + * Paul Mackerras, August 1996. + * Copyright (C) 1996 Paul Mackerras. + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/blkdev.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <asm/dbdma.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/pci-bridge.h> +#include <asm/macio.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> + +#include "mac53c94.h" + +enum fsc_phase { + idle, + selecting, + dataing, + completing, + busfreeing, +}; + +struct fsc_state { + struct mac53c94_regs __iomem *regs; + int intr; + struct dbdma_regs __iomem *dma; + int dmaintr; + int clk_freq; + struct Scsi_Host *host; + struct scsi_cmnd *request_q; + struct scsi_cmnd *request_qtail; + struct scsi_cmnd *current_req; /* req we're currently working on */ + enum fsc_phase phase; /* what we're currently trying to do */ + struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */ + void *dma_cmd_space; + struct pci_dev *pdev; + dma_addr_t dma_addr; + struct macio_dev *mdev; +}; + +static void mac53c94_init(struct fsc_state *); +static void mac53c94_start(struct fsc_state *); +static void mac53c94_interrupt(int, void *, struct pt_regs *); +static irqreturn_t do_mac53c94_interrupt(int, void *, struct pt_regs *); +static void cmd_done(struct fsc_state *, int result); +static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *); + + +static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) +{ + struct fsc_state *state; + +#if 0 + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + int i; + printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); + for (i = 0; i < cmd->cmd_len; ++i) + printk(" %.2x", cmd->cmnd[i]); + printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", + cmd->use_sg, cmd->request_bufflen, cmd->request_buffer); + } +#endif + + cmd->scsi_done = done; + cmd->host_scribble = NULL; + + state = (struct fsc_state *) cmd->device->host->hostdata; + + if (state->request_q == NULL) + state->request_q = cmd; + else + state->request_qtail->host_scribble = (void *) cmd; + state->request_qtail = cmd; + + if (state->phase == idle) + mac53c94_start(state); + + return 0; +} + +static int mac53c94_abort(struct scsi_cmnd *cmd) +{ + return FAILED; +} + +static int mac53c94_host_reset(struct scsi_cmnd *cmd) +{ + struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata; + struct mac53c94_regs __iomem *regs = state->regs; + struct dbdma_regs __iomem *dma = state->dma; + + writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); + writeb(CMD_SCSI_RESET, ®s->command); /* assert RST */ + udelay(100); /* leave it on for a while (>= 25us) */ + writeb(CMD_RESET, ®s->command); + udelay(20); + mac53c94_init(state); + writeb(CMD_NOP, ®s->command); + return SUCCESS; +} + +static void mac53c94_init(struct fsc_state *state) +{ + struct mac53c94_regs __iomem *regs = state->regs; + struct dbdma_regs __iomem *dma = state->dma; + int x; + + writeb(state->host->this_id | CF1_PAR_ENABLE, ®s->config1); + writeb(TIMO_VAL(250), ®s->sel_timeout); /* 250ms */ + writeb(CLKF_VAL(state->clk_freq), ®s->clk_factor); + writeb(CF2_FEATURE_EN, ®s->config2); + writeb(0, ®s->config3); + writeb(0, ®s->sync_period); + writeb(0, ®s->sync_offset); + x = readb(®s->interrupt); + writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); +} + +/* + * Start the next command for a 53C94. + * Should be called with interrupts disabled. + */ +static void mac53c94_start(struct fsc_state *state) +{ + struct scsi_cmnd *cmd; + struct mac53c94_regs __iomem *regs = state->regs; + int i; + + if (state->phase != idle || state->current_req != NULL) + panic("inappropriate mac53c94_start (state=%p)", state); + if (state->request_q == NULL) + return; + state->current_req = cmd = state->request_q; + state->request_q = (struct scsi_cmnd *) cmd->host_scribble; + + /* Off we go */ + writeb(0, ®s->count_lo); + writeb(0, ®s->count_mid); + writeb(0, ®s->count_hi); + writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); + udelay(1); + writeb(CMD_FLUSH, ®s->command); + udelay(1); + writeb(cmd->device->id, ®s->dest_id); + writeb(0, ®s->sync_period); + writeb(0, ®s->sync_offset); + + /* load the command into the FIFO */ + for (i = 0; i < cmd->cmd_len; ++i) + writeb(cmd->cmnd[i], ®s->fifo); + + /* do select without ATN XXX */ + writeb(CMD_SELECT, ®s->command); + state->phase = selecting; + + if (cmd->use_sg > 0 || cmd->request_bufflen != 0) + set_dma_cmds(state, cmd); +} + +static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id, struct pt_regs *ptregs) +{ + unsigned long flags; + struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host; + + spin_lock_irqsave(dev->host_lock, flags); + mac53c94_interrupt(irq, dev_id, ptregs); + spin_unlock_irqrestore(dev->host_lock, flags); + return IRQ_HANDLED; +} + +static void mac53c94_interrupt(int irq, void *dev_id, struct pt_regs *ptregs) +{ + struct fsc_state *state = (struct fsc_state *) dev_id; + struct mac53c94_regs __iomem *regs = state->regs; + struct dbdma_regs __iomem *dma = state->dma; + struct scsi_cmnd *cmd = state->current_req; + int nb, stat, seq, intr; + static int mac53c94_errors; + + /* + * Apparently, reading the interrupt register unlatches + * the status and sequence step registers. + */ + seq = readb(®s->seqstep); + stat = readb(®s->status); + intr = readb(®s->interrupt); + +#if 0 + printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n", + intr, stat, seq, state->phase); +#endif + + if (intr & INTR_RESET) { + /* SCSI bus was reset */ + printk(KERN_INFO "external SCSI bus reset detected\n"); + writeb(CMD_NOP, ®s->command); + writel(RUN << 16, &dma->control); /* stop dma */ + cmd_done(state, DID_RESET << 16); + return; + } + if (intr & INTR_ILL_CMD) { + printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n", + intr, stat, seq, state->phase); + cmd_done(state, DID_ERROR << 16); + return; + } + if (stat & STAT_ERROR) { +#if 0 + /* XXX these seem to be harmless? */ + printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n", + intr, stat, seq, state->phase); +#endif + ++mac53c94_errors; + writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); + } + if (cmd == 0) { + printk(KERN_DEBUG "53c94: interrupt with no command active?\n"); + return; + } + if (stat & STAT_PARITY) { + printk(KERN_ERR "mac53c94: parity error\n"); + cmd_done(state, DID_PARITY << 16); + return; + } + switch (state->phase) { + case selecting: + if (intr & INTR_DISCONNECT) { + /* selection timed out */ + cmd_done(state, DID_BAD_TARGET << 16); + return; + } + if (intr != INTR_BUS_SERV + INTR_DONE) { + printk(KERN_DEBUG "got intr %x during selection\n", intr); + cmd_done(state, DID_ERROR << 16); + return; + } + if ((seq & SS_MASK) != SS_DONE) { + printk(KERN_DEBUG "seq step %x after command\n", seq); + cmd_done(state, DID_ERROR << 16); + return; + } + writeb(CMD_NOP, ®s->command); + /* set DMA controller going if any data to transfer */ + if ((stat & (STAT_MSG|STAT_CD)) == 0 + && (cmd->use_sg > 0 || cmd->request_bufflen != 0)) { + nb = cmd->SCp.this_residual; + if (nb > 0xfff0) + nb = 0xfff0; + cmd->SCp.this_residual -= nb; + writeb(nb, ®s->count_lo); + writeb(nb >> 8, ®s->count_mid); + writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); + writel(virt_to_phys(state->dma_cmds), &dma->cmdptr); + writel((RUN << 16) | RUN, &dma->control); + writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); + state->phase = dataing; + break; + } else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) { + /* up to status phase already */ + writeb(CMD_I_COMPLETE, ®s->command); + state->phase = completing; + } else { + printk(KERN_DEBUG "in unexpected phase %x after cmd\n", + stat & STAT_PHASE); + cmd_done(state, DID_ERROR << 16); + return; + } + break; + + case dataing: + if (intr != INTR_BUS_SERV) { + printk(KERN_DEBUG "got intr %x before status\n", intr); + cmd_done(state, DID_ERROR << 16); + return; + } + if (cmd->SCp.this_residual != 0 + && (stat & (STAT_MSG|STAT_CD)) == 0) { + /* Set up the count regs to transfer more */ + nb = cmd->SCp.this_residual; + if (nb > 0xfff0) + nb = 0xfff0; + cmd->SCp.this_residual -= nb; + writeb(nb, ®s->count_lo); + writeb(nb >> 8, ®s->count_mid); + writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); + writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); + break; + } + if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) { + printk(KERN_DEBUG "intr %x before data xfer complete\n", intr); + } + writel(RUN << 16, &dma->control); /* stop dma */ + if (cmd->use_sg != 0) { + pci_unmap_sg(state->pdev, + (struct scatterlist *)cmd->request_buffer, + cmd->use_sg, cmd->sc_data_direction); + } else { + pci_unmap_single(state->pdev, state->dma_addr, + cmd->request_bufflen, cmd->sc_data_direction); + } + /* should check dma status */ + writeb(CMD_I_COMPLETE, ®s->command); + state->phase = completing; + break; + case completing: + if (intr != INTR_DONE) { + printk(KERN_DEBUG "got intr %x on completion\n", intr); + cmd_done(state, DID_ERROR << 16); + return; + } + cmd->SCp.Status = readb(®s->fifo); + cmd->SCp.Message = readb(®s->fifo); + cmd->result = CMD_ACCEPT_MSG; + writeb(CMD_ACCEPT_MSG, ®s->command); + state->phase = busfreeing; + break; + case busfreeing: + if (intr != INTR_DISCONNECT) { + printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr); + } + cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8) + + cmd->SCp.Status); + break; + default: + printk(KERN_DEBUG "don't know about phase %d\n", state->phase); + } +} + +static void cmd_done(struct fsc_state *state, int result) +{ + struct scsi_cmnd *cmd; + + cmd = state->current_req; + if (cmd != 0) { + cmd->result = result; + (*cmd->scsi_done)(cmd); + state->current_req = NULL; + } + state->phase = idle; + mac53c94_start(state); +} + +/* + * Set up DMA commands for transferring data. + */ +static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd) +{ + int i, dma_cmd, total; + struct scatterlist *scl; + struct dbdma_cmd *dcmds; + dma_addr_t dma_addr; + u32 dma_len; + + dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ? + OUTPUT_MORE : INPUT_MORE; + dcmds = state->dma_cmds; + if (cmd->use_sg > 0) { + int nseg; + + total = 0; + scl = (struct scatterlist *) cmd->buffer; + nseg = pci_map_sg(state->pdev, scl, cmd->use_sg, + cmd->sc_data_direction); + for (i = 0; i < nseg; ++i) { + dma_addr = sg_dma_address(scl); + dma_len = sg_dma_len(scl); + if (dma_len > 0xffff) + panic("mac53c94: scatterlist element >= 64k"); + total += dma_len; + st_le16(&dcmds->req_count, dma_len); + st_le16(&dcmds->command, dma_cmd); + st_le32(&dcmds->phy_addr, dma_addr); + dcmds->xfer_status = 0; + ++scl; + ++dcmds; + } + } else { + total = cmd->request_bufflen; + if (total > 0xffff) + panic("mac53c94: transfer size >= 64k"); + dma_addr = pci_map_single(state->pdev, cmd->request_buffer, + total, cmd->sc_data_direction); + state->dma_addr = dma_addr; + st_le16(&dcmds->req_count, total); + st_le32(&dcmds->phy_addr, dma_addr); + dcmds->xfer_status = 0; + ++dcmds; + } + dma_cmd += OUTPUT_LAST - OUTPUT_MORE; + st_le16(&dcmds[-1].command, dma_cmd); + st_le16(&dcmds->command, DBDMA_STOP); + cmd->SCp.this_residual = total; +} + +static struct scsi_host_template mac53c94_template = { + .proc_name = "53c94", + .name = "53C94", + .queuecommand = mac53c94_queue, + .eh_abort_handler = mac53c94_abort, + .eh_host_reset_handler = mac53c94_host_reset, + .can_queue = 1, + .this_id = 7, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = DISABLE_CLUSTERING, +}; + +static int mac53c94_probe(struct macio_dev *mdev, const struct of_match *match) +{ + struct device_node *node = macio_get_of_node(mdev); + struct pci_dev *pdev = macio_get_pci_dev(mdev); + struct fsc_state *state; + struct Scsi_Host *host; + void *dma_cmd_space; + unsigned char *clkprop; + int proplen; + + if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { + printk(KERN_ERR "mac53c94: expected 2 addrs and intrs (got %d/%d)\n", + node->n_addrs, node->n_intrs); + return -ENODEV; + } + + if (macio_request_resources(mdev, "mac53c94") != 0) { + printk(KERN_ERR "mac53c94: unable to request memory resources"); + return -EBUSY; + } + + host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state)); + if (host == NULL) { + printk(KERN_ERR "mac53c94: couldn't register host"); + goto out_release; + } + + state = (struct fsc_state *) host->hostdata; + macio_set_drvdata(mdev, state); + state->host = host; + state->pdev = pdev; + state->mdev = mdev; + + state->regs = (struct mac53c94_regs __iomem *) + ioremap(macio_resource_start(mdev, 0), 0x1000); + state->intr = macio_irq(mdev, 0); + state->dma = (struct dbdma_regs __iomem *) + ioremap(macio_resource_start(mdev, 1), 0x1000); + state->dmaintr = macio_irq(mdev, 1); + if (state->regs == NULL || state->dma == NULL) { + printk(KERN_ERR "mac53c94: ioremap failed for %s\n", + node->full_name); + goto out_free; + } + + clkprop = get_property(node, "clock-frequency", &proplen); + if (clkprop == NULL || proplen != sizeof(int)) { + printk(KERN_ERR "%s: can't get clock frequency, " + "assuming 25MHz\n", node->full_name); + state->clk_freq = 25000000; + } else + state->clk_freq = *(int *)clkprop; + + /* Space for dma command list: +1 for stop command, + * +1 to allow for aligning. + * XXX FIXME: Use DMA consistent routines + */ + dma_cmd_space = kmalloc((host->sg_tablesize + 2) * + sizeof(struct dbdma_cmd), GFP_KERNEL); + if (dma_cmd_space == 0) { + printk(KERN_ERR "mac53c94: couldn't allocate dma " + "command space for %s\n", node->full_name); + goto out_free; + } + state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space); + memset(state->dma_cmds, 0, (host->sg_tablesize + 1) + * sizeof(struct dbdma_cmd)); + state->dma_cmd_space = dma_cmd_space; + + mac53c94_init(state); + + if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94", state)) { + printk(KERN_ERR "mac53C94: can't get irq %d for %s\n", + state->intr, node->full_name); + goto out_free_dma; + } + + /* XXX FIXME: handle failure */ + scsi_add_host(host, &mdev->ofdev.dev); + scsi_scan_host(host); + + return 0; + + out_free_dma: + kfree(state->dma_cmd_space); + out_free: + if (state->dma != NULL) + iounmap(state->dma); + if (state->regs != NULL) + iounmap(state->regs); + scsi_host_put(host); + out_release: + macio_release_resources(mdev); + + return -ENODEV; +} + +static int mac53c94_remove(struct macio_dev *mdev) +{ + struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev); + struct Scsi_Host *host = fp->host; + + scsi_remove_host(host); + + free_irq(fp->intr, fp); + + if (fp->regs) + iounmap((void *) fp->regs); + if (fp->dma) + iounmap((void *) fp->dma); + kfree(fp->dma_cmd_space); + + scsi_host_put(host); + + macio_release_resources(mdev); + + return 0; +} + + +static struct of_match mac53c94_match[] = +{ + { + .name = "53c94", + .type = OF_ANY_MATCH, + .compatible = OF_ANY_MATCH + }, + {}, +}; + +static struct macio_driver mac53c94_driver = +{ + .name = "mac53c94", + .match_table = mac53c94_match, + .probe = mac53c94_probe, + .remove = mac53c94_remove, +}; + + +static int __init init_mac53c94(void) +{ + return macio_register_driver(&mac53c94_driver); +} + +static void __exit exit_mac53c94(void) +{ + return macio_unregister_driver(&mac53c94_driver); +} + +module_init(init_mac53c94); +module_exit(exit_mac53c94); + +MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver"); +MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>"); +MODULE_LICENSE("GPL"); |