4 files changed, 13 insertions, 39 deletions

diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 187f4e8..18296ee 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,6 +5,7 @@
 config PLAT_NOMADIK
 	bool
 	depends on ARCH_NOMADIK || ARCH_U8500
+	select CLKSRC_MMIO
 	default y
 	help
 	  Common platform code for Nomadik and other ST-Ericsson
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index f49748e..307b813 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -23,6 +23,8 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 
+#include <asm/mach/irq.h>
+
 #include <plat/pincfg.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -681,13 +683,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
 	struct irq_chip *host_chip = irq_get_chip(irq);
 	unsigned int first_irq;
 
-	if (host_chip->irq_mask_ack)
-		host_chip->irq_mask_ack(&desc->irq_data);
-	else {
-		host_chip->irq_mask(&desc->irq_data);
-		if (host_chip->irq_ack)
-			host_chip->irq_ack(&desc->irq_data);
-	}
+	chained_irq_enter(host_chip, desc);
 
 	nmk_chip = irq_get_handler_data(irq);
 	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
@@ -698,7 +694,7 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
 		status &= ~BIT(bit);
 	}
 
-	host_chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(host_chip, desc);
 }
 
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
index 1621db6..8ba70ff 100644
--- a/arch/arm/plat-nomadik/include/plat/i2c.h
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -11,8 +11,8 @@
 enum i2c_freq_mode {
 	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
 	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
 	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
-	I2C_FREQ_MODE_HIGH_SPEED	/* up to 3.4 Mb/s */
 };
 
 /**
@@ -24,13 +24,15 @@ enum i2c_freq_mode {
  *		to the values of 14, 6, 2 for a 48 MHz i2c clk
  * @tft:	Tx FIFO Threshold in bytes
  * @rft:	Rx FIFO Threshold in bytes
+ * @timeout	Slave response timeout(ms)
  * @sm:		speed mode
  */
 struct nmk_i2c_controller {
 	unsigned long	clk_freq;
 	unsigned short	slsu;
-	unsigned char 	tft;
-	unsigned char 	rft;
+	unsigned char	tft;
+	unsigned char	rft;
+	int timeout;
 	enum i2c_freq_mode	sm;
 };
 
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 4172340..ef74e15 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -26,29 +26,6 @@
 void __iomem *mtu_base; /* Assigned by machine code */
 
 /*
- * Kernel assumes that sched_clock can be called early
- * but the MTU may not yet be initialized.
- */
-static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-/* clocksource: MTU decrements, so we negate the value being read. */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
-	return -readl(mtu_base + MTU_VAL(0));
-}
-
-static struct clocksource nmdk_clksrc = {
-	.name		= "mtu_0",
-	.rating		= 200,
-	.read		= nmdk_read_timer_dummy,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
  * better resolution when scheduling the kernel.
@@ -172,12 +149,10 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the clock source is ready */
-	nmdk_clksrc.read = nmdk_read_timer;
-
-	if (clocksource_register_hz(&nmdk_clksrc, rate))
+	if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
+			rate, 200, 32, clocksource_mmio_readl_down))
 		pr_err("timer: failed to initialize clock source %s\n",
-		       nmdk_clksrc.name);
+		       "mtu_0");
 
 	init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);