diff options
Diffstat (limited to 'arch')
985 files changed, 13170 insertions, 17636 deletions
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h index 9baae8a..da5449e 100644 --- a/arch/alpha/include/asm/elf.h +++ b/arch/alpha/include/asm/elf.h @@ -101,7 +101,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define ELF_PLAT_INIT(_r, load_addr) _r->r0 = 0 -/* The registers are layed out in pt_regs for PAL and syscall +/* The registers are laid out in pt_regs for PAL and syscall convenience. Re-order them for the linear elf_gregset_t. */ struct pt_regs; diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 058937b..b183416 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -452,10 +452,14 @@ #define __NR_fanotify_init 494 #define __NR_fanotify_mark 495 #define __NR_prlimit64 496 +#define __NR_name_to_handle_at 497 +#define __NR_open_by_handle_at 498 +#define __NR_clock_adjtime 499 +#define __NR_syncfs 500 #ifdef __KERNEL__ -#define NR_SYSCALLS 497 +#define NR_SYSCALLS 501 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index 9bb7b85..7a6d908 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o vmlinux.lds asflags-y := $(KBUILD_CFLAGS) -ccflags-y := -Werror -Wno-sign-compare +ccflags-y := -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c index 4843f6e..cb2801c 100644 --- a/arch/alpha/kernel/core_lca.c +++ b/arch/alpha/kernel/core_lca.c @@ -133,7 +133,7 @@ conf_read(unsigned long addr) local_irq_save(flags); - /* Reset status register to avoid loosing errors. */ + /* Reset status register to avoid losing errors. */ stat0 = *(vulp)LCA_IOC_STAT0; *(vulp)LCA_IOC_STAT0 = stat0; mb(); @@ -170,7 +170,7 @@ conf_write(unsigned long addr, unsigned int value) local_irq_save(flags); /* avoid getting hit by machine check */ - /* Reset status register to avoid loosing errors. */ + /* Reset status register to avoid losing errors. */ stat0 = *(vulp)LCA_IOC_STAT0; *(vulp)LCA_IOC_STAT0 = stat0; mb(); diff --git a/arch/alpha/kernel/core_mcpcia.c b/arch/alpha/kernel/core_mcpcia.c index 381fec0..da7bcc3 100644 --- a/arch/alpha/kernel/core_mcpcia.c +++ b/arch/alpha/kernel/core_mcpcia.c @@ -88,7 +88,7 @@ conf_read(unsigned long addr, unsigned char type1, { unsigned long flags; unsigned long mid = MCPCIA_HOSE2MID(hose->index); - unsigned int stat0, value, temp, cpu; + unsigned int stat0, value, cpu; cpu = smp_processor_id(); @@ -101,7 +101,7 @@ conf_read(unsigned long addr, unsigned char type1, stat0 = *(vuip)MCPCIA_CAP_ERR(mid); *(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb(); - temp = *(vuip)MCPCIA_CAP_ERR(mid); + *(vuip)MCPCIA_CAP_ERR(mid); DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0)); mb(); @@ -136,7 +136,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, { unsigned long flags; unsigned long mid = MCPCIA_HOSE2MID(hose->index); - unsigned int stat0, temp, cpu; + unsigned int stat0, cpu; cpu = smp_processor_id(); @@ -145,7 +145,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, /* Reset status register to avoid losing errors. */ stat0 = *(vuip)MCPCIA_CAP_ERR(mid); *(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb(); - temp = *(vuip)MCPCIA_CAP_ERR(mid); + *(vuip)MCPCIA_CAP_ERR(mid); DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0)); draina(); @@ -157,7 +157,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1, *((vuip)addr) = value; mb(); mb(); /* magic */ - temp = *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */ + *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */ mcheck_expected(cpu) = 0; mb(); @@ -572,12 +572,10 @@ mcpcia_print_system_area(unsigned long la_ptr) void mcpcia_machine_check(unsigned long vector, unsigned long la_ptr) { - struct el_common *mchk_header; struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout; unsigned int cpu = smp_processor_id(); int expected; - mchk_header = (struct el_common *)la_ptr; mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr; expected = mcheck_expected(cpu); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 648ae88..ae54ad9 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1027,7 +1027,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) * normal operation, dismiss them. * * Dismiss if: - * C_STAT = 0x14 (Error Reponse) + * C_STAT = 0x14 (Error Response) * C_STS<3> = 0 (C_ADDR valid) * C_ADDR<42> = 1 (I/O) * C_ADDR<31:22> = 111110xxb (PCI Config space) diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c3b3781..14b26c4 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -533,8 +533,6 @@ static struct el_subpacket_annotation el_titan_annotations[] = { static struct el_subpacket * el_process_regatta_subpacket(struct el_subpacket *header) { - int status; - if (header->class != EL_CLASS__REGATTA_FAMILY) { printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n", err_print_prefix, @@ -551,7 +549,7 @@ el_process_regatta_subpacket(struct el_subpacket *header) printk("%s ** Occurred on CPU %d:\n", err_print_prefix, (int)header->by_type.regatta_frame.cpuid); - status = privateer_process_logout_frame((struct el_common *) + privateer_process_logout_frame((struct el_common *) header->by_type.regatta_frame.data_start, 1); break; default: diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 1479dc6..51b7fbd 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -228,7 +228,7 @@ struct irqaction timer_irqaction = { void __init init_rtc_irq(void) { - irq_set_chip_and_handler_name(RTC_IRQ, &no_irq_chip, + irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip, handle_simple_irq, "RTC"); setup_irq(RTC_IRQ, &timer_irqaction); } diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index d2634e4..edbddcb 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -1404,8 +1404,6 @@ determine_cpu_caches (unsigned int cpu_type) case PCA56_CPU: case PCA57_CPU: { - unsigned long cbox_config, size; - if (cpu_type == PCA56_CPU) { L1I = CSHAPE(16*1024, 6, 1); L1D = CSHAPE(8*1024, 5, 1); @@ -1415,10 +1413,12 @@ determine_cpu_caches (unsigned int cpu_type) } L3 = -1; +#if 0 + unsigned long cbox_config, size; + cbox_config = *(vulp) phys_to_virt (0xfffff00008UL); size = 512*1024 * (1 << ((cbox_config >> 12) & 3)); -#if 0 L2 = ((cbox_config >> 31) & 1 ? CSHAPE (size, 6, 1) : -1); #else L2 = external_cache_probe(512*1024, 6); diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c index 3e6a289..6886b83 100644 --- a/arch/alpha/kernel/smc37c93x.c +++ b/arch/alpha/kernel/smc37c93x.c @@ -79,7 +79,6 @@ static unsigned long __init SMCConfigState(unsigned long baseAddr) { unsigned char devId; - unsigned char devRev; unsigned long configPort; unsigned long indexPort; @@ -100,7 +99,7 @@ static unsigned long __init SMCConfigState(unsigned long baseAddr) devId = inb(dataPort); if (devId == VALID_DEVICE_ID) { outb(DEVICE_REV, indexPort); - devRev = inb(dataPort); + /* unsigned char devRev = */ inb(dataPort); break; } else diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 42aa078..5a621c6 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -585,8 +585,7 @@ handle_ipi(struct pt_regs *regs) switch (which) { case IPI_RESCHEDULE: - /* Reschedule callback. Everything to be done - is done by the interrupt return path. */ + scheduler_ipi(); break; case IPI_CALL_FUNC: diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c index d3cb28b..d92cdc7 100644 --- a/arch/alpha/kernel/sys_wildfire.c +++ b/arch/alpha/kernel/sys_wildfire.c @@ -156,7 +156,6 @@ static void __init wildfire_init_irq_per_pca(int qbbno, int pcano) { int i, irq_bias; - unsigned long io_bias; static struct irqaction isa_enable = { .handler = no_action, .name = "isa_enable", @@ -165,10 +164,12 @@ wildfire_init_irq_per_pca(int qbbno, int pcano) irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA) + pcano * WILDFIRE_IRQ_PER_PCA; +#if 0 + unsigned long io_bias; + /* Only need the following for first PCI bus per PCA. */ io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS; -#if 0 outb(0, DMA1_RESET_REG + io_bias); outb(0, DMA2_RESET_REG + io_bias); outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index a6a1de9..15f999d 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -498,23 +498,27 @@ sys_call_table: .quad sys_ni_syscall /* sys_timerfd */ .quad sys_eventfd .quad sys_recvmmsg - .quad sys_fallocate /* 480 */ + .quad sys_fallocate /* 480 */ .quad sys_timerfd_create .quad sys_timerfd_settime .quad sys_timerfd_gettime .quad sys_signalfd4 - .quad sys_eventfd2 /* 485 */ + .quad sys_eventfd2 /* 485 */ .quad sys_epoll_create1 .quad sys_dup3 .quad sys_pipe2 .quad sys_inotify_init1 - .quad sys_preadv /* 490 */ + .quad sys_preadv /* 490 */ .quad sys_pwritev .quad sys_rt_tgsigqueueinfo .quad sys_perf_event_open .quad sys_fanotify_init - .quad sys_fanotify_mark /* 495 */ + .quad sys_fanotify_mark /* 495 */ .quad sys_prlimit64 + .quad sys_name_to_handle_at + .quad sys_open_by_handle_at + .quad sys_clock_adjtime + .quad sys_syncfs /* 500 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index a58e84f..818e74e 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -153,6 +153,7 @@ void read_persistent_clock(struct timespec *ts) year += 100; ts->tv_sec = mktime(year, mon, day, hour, min, sec); + ts->tv_nsec = 0; } @@ -374,8 +375,7 @@ static struct clocksource clocksource_rpcc = { static inline void register_rpcc_clocksource(long cycle_freq) { - clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4); - clocksource_register(&clocksource_rpcc); + clocksource_register_hz(&clocksource_rpcc, cycle_freq); } #else /* !CONFIG_SMP */ static inline void register_rpcc_clocksource(long cycle_freq) diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S index 3fd8bf4..dd0d8c6 100644 --- a/arch/alpha/lib/ev67-strrchr.S +++ b/arch/alpha/lib/ev67-strrchr.S @@ -82,7 +82,7 @@ $loop: $eos: negq t1, t4 # E : isolate first null byte match and t1, t4, t4 # E : - subq t4, 1, t5 # E : build a mask of the bytes upto... + subq t4, 1, t5 # E : build a mask of the bytes up to... or t4, t5, t4 # E : ... and including the null and t3, t4, t3 # E : mask out char matches after null diff --git a/arch/alpha/lib/fls.c b/arch/alpha/lib/fls.c index 32afaa3..ddd048c 100644 --- a/arch/alpha/lib/fls.c +++ b/arch/alpha/lib/fls.c @@ -6,7 +6,7 @@ #include <linux/bitops.h> /* This is fls(x)-1, except zero is held to zero. This allows most - efficent input into extbl, plus it allows easy handling of fls(0)=0. */ + efficient input into extbl, plus it allows easy handling of fls(0)=0. */ const unsigned char __flsm1_tab[256] = { diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S index 82cfd0a..1970dc0 100644 --- a/arch/alpha/lib/strrchr.S +++ b/arch/alpha/lib/strrchr.S @@ -54,7 +54,7 @@ $loop: $eos: negq t1, t4 # e0 : isolate first null byte match and t1, t4, t4 # e1 : - subq t4, 1, t5 # e0 : build a mask of the bytes upto... + subq t4, 1, t5 # e0 : build a mask of the bytes up to... or t4, t5, t4 # e1 : ... and including the null and t3, t4, t3 # e0 : mask out char matches after null diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c index 7030208..5b9d178 100644 --- a/arch/alpha/oprofile/op_model_ev67.c +++ b/arch/alpha/oprofile/op_model_ev67.c @@ -192,7 +192,7 @@ ev67_handle_interrupt(unsigned long which, struct pt_regs *regs, case TRAP_INVALID1: case TRAP_INVALID2: case TRAP_INVALID3: - /* Pipeline redirection ocurred. PMPC points + /* Pipeline redirection occurred. PMPC points to PALcode. Recognize ITB miss by PALcode offset address, and get actual PC from EXC_ADDR. */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b9f78b..377a7a5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -694,7 +694,7 @@ config ARCH_S3C2410 the Samsung SMDK2410 development board (and derivatives). Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no seperate machine + the same SoC ID code. This means that there is no separate machine directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. config ARCH_S3C64XX @@ -1540,7 +1540,6 @@ config HIGHMEM config HIGHPTE bool "Allocate 2nd-level pagetables from highmem" depends on HIGHMEM - depends on !OUTER_CACHE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" @@ -2012,6 +2011,8 @@ source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ + CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y endmenu diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 901e6df..2cef8e1 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -34,7 +34,7 @@ config PROCESSOR_ID used instead of the auto-probing which utilizes the register. config REMAP_VECTORS_TO_RAM - bool 'Install vectors to the begining of RAM' if DRAM_BASE + bool 'Install vectors to the beginning of RAM' if DRAM_BASE depends on DRAM_BASE help The kernel needs to change the hardware exception vectors. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 494224a..03d01d7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -63,17 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_ERRORS - bool "Verbose kernel error messages" - depends on DEBUG_KERNEL - help - This option controls verbose debugging information which can be - printed when the kernel detects an internal error. This debugging - information is useful to kernel hackers when tracking down problems, - but mostly meaningless to other people. It's safe to say Y unless - you are concerned with the code size or don't want to see these - messages. - config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 8ebbb51..0c6852d 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -74,7 +74,7 @@ ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT) ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS) else ZTEXTADDR := 0 -ZBSSADDR := ALIGN(4) +ZBSSADDR := ALIGN(8) endif SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index adf583c..49f5b2e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -179,15 +179,14 @@ not_angel: bl cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12} - ldr sp, [r0, #32] + ldmia r0, {r1, r2, r3, r6, r9, r11, r12} + ldr sp, [r0, #28] /* * We might be running at a different address. We need * to fix up various pointers. */ sub r0, r0, r1 @ calculate the delta offset - add r5, r5, r0 @ _start add r6, r6, r0 @ _edata #ifndef CONFIG_ZBOOT_ROM @@ -206,31 +205,40 @@ restart: adr r0, LC0 /* * Check to see if we will overwrite ourselves. * r4 = final kernel address - * r5 = start of this image * r9 = size of decompressed image * r10 = end of this image, including bss/stack/malloc space if non XIP * We basically want: - * r4 >= r10 -> OK - * r4 + image length <= r5 -> OK + * r4 - 16k page directory >= r10 -> OK + * r4 + image length <= current position (pc) -> OK */ + add r10, r10, #16384 cmp r4, r10 bhs wont_overwrite add r10, r4, r9 - cmp r10, r5 + ARM( cmp r10, pc ) + THUMB( mov lr, pc ) + THUMB( cmp r10, lr ) bls wont_overwrite /* * Relocate ourselves past the end of the decompressed kernel. - * r5 = start of this image * r6 = _edata * r10 = end of the decompressed kernel * Because we always copy ahead, we need to do it from the end and go * backward in case the source and destination overlap. */ - /* Round up to next 256-byte boundary. */ - add r10, r10, #256 + /* + * Bump to the next 256-byte boundary with the size of + * the relocation code added. This avoids overwriting + * ourself when the offset is small. + */ + add r10, r10, #((reloc_code_end - restart + 256) & ~255) bic r10, r10, #255 + /* Get start of code we want to copy and align it down. */ + adr r5, restart + bic r5, r5, #31 + sub r9, r6, r5 @ size to copy add r9, r9, #31 @ rounded up to a multiple bic r9, r9, #31 @ ... of 32 bytes @@ -245,6 +253,11 @@ restart: adr r0, LC0 /* Preserve offset to relocated code. */ sub r6, r9, r6 +#ifndef CONFIG_ZBOOT_ROM + /* cache_clean_flush may use the stack, so relocate it */ + add sp, sp, r6 +#endif + bl cache_clean_flush adr r0, BSYM(restart) @@ -333,7 +346,6 @@ not_relocated: mov r0, #0 LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 - .word _start @ r5 .word _edata @ r6 .word _image_size @ r9 .word _got_start @ r11 @@ -1062,6 +1074,7 @@ memdump: mov r12, r0 #endif .ltorg +reloc_code_end: .align .section ".stack", "aw", %nobits diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 5309909..ea80abe 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -54,6 +54,7 @@ SECTIONS .bss : { *(.bss) } _end = .; + . = ALIGN(8); /* the stack must be 64-bit aligned */ .stack : { *(.stack) } .stab 0 : { *(.stab) } diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e7521bca..6ea9b6f 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 8f0f86d..97912fa 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], unsigned lcnt0, lcnt1, ljmp0, ljmp1; struct _arg_LPEND lpend; - /* Max iterations possibile in DMALP is 256 */ + /* Max iterations possible in DMALP is 256 */ if (*bursts >= 256*256) { lcnt1 = 256; lcnt0 = 256; @@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi) } for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occured */ + if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); int active; diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 113085a..7aa4262 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,17 +22,16 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <asm/mach/irq.h> #include <asm/hardware/vic.h> -#if defined(CONFIG_PM) +#ifdef CONFIG_PM /** * struct vic_device - VIC PM device - * @sysdev: The system device which is registered. * @irq: The IRQ number for the base of the VIC. * @base: The register base for the VIC. * @resume_sources: A bitmask of interrupts for resume. @@ -43,8 +42,6 @@ * @protect: Save for VIC_PROTECT. */ struct vic_device { - struct sys_device sysdev; - void __iomem *base; int irq; u32 resume_sources; @@ -59,11 +56,6 @@ struct vic_device { static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; static int vic_id; - -static inline struct vic_device *to_vic(struct sys_device *sys) -{ - return container_of(sys, struct vic_device, sysdev); -} #endif /* CONFIG_PM */ /** @@ -85,10 +77,9 @@ static void vic_init2(void __iomem *base) writel(32, base + VIC_PL190_DEF_VECT_ADDR); } -#if defined(CONFIG_PM) -static int vic_class_resume(struct sys_device *dev) +#ifdef CONFIG_PM +static void resume_one_vic(struct vic_device *vic) { - struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); @@ -107,13 +98,18 @@ static int vic_class_resume(struct sys_device *dev) writel(vic->soft_int, base + VIC_INT_SOFT); writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); +} - return 0; +static void vic_resume(void) +{ + int id; + + for (id = vic_id - 1; id >= 0; id--) + resume_one_vic(vic_devices + id); } -static int vic_class_suspend(struct sys_device *dev, pm_message_t state) +static void suspend_one_vic(struct vic_device *vic) { - struct vic_device *vic = to_vic(dev); void __iomem *base = vic->base; printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); @@ -128,14 +124,21 @@ static int vic_class_suspend(struct sys_device *dev, pm_message_t state) writel(vic->resume_irqs, base + VIC_INT_ENABLE); writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); +} + +static int vic_suspend(void) +{ + int id; + + for (id = 0; id < vic_id; id++) + suspend_one_vic(vic_devices + id); return 0; } -struct sysdev_class vic_class = { - .name = "vic", - .suspend = vic_class_suspend, - .resume = vic_class_resume, +struct syscore_ops vic_syscore_ops = { + .suspend = vic_suspend, + .resume = vic_resume, }; /** @@ -147,30 +150,8 @@ struct sysdev_class vic_class = { */ static int __init vic_pm_init(void) { - struct vic_device *dev = vic_devices; - int err; - int id; - - if (vic_id == 0) - return 0; - - err = sysdev_class_register(&vic_class); - if (err) { - printk(KERN_ERR "%s: cannot register class\n", __func__); - return err; - } - - for (id = 0; id < vic_id; id++, dev++) { - dev->sysdev.id = id; - dev->sysdev.cls = &vic_class; - - err = sysdev_register(&dev->sysdev); - if (err) { - printk(KERN_ERR "%s: failed to register device\n", - __func__); - return err; - } - } + if (vic_id > 0) + register_syscore_ops(&vic_syscore_ops); return 0; } diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig new file mode 100644 index 0000000..c55e921 --- /dev/null +++ b/arch/arm/configs/at91x40_defconfig @@ -0,0 +1,48 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_EMBEDDED=y +# CONFIG_HOTPLUG is not set +# CONFIG_ELF_CORE is not set +# CONFIG_FUTEX is not set +# CONFIG_TIMERFD is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_MMU is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91X40=y +CONFIG_MACH_AT91EB01=y +CONFIG_AT91_EARLY_USART0=y +CONFIG_CPU_ARM7TDMI=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x01000000 +CONFIG_DRAM_SIZE=0x00400000 +CONFIG_FLASH_MEM_BASE=0x01400000 +CONFIG_PROCESSOR_ID=0x14000040 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_BINFMT_FLAT=y +# CONFIG_SUSPEND is not set +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +CONFIG_BLK_DEV_RAM=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_ROMFS_FS=y +# CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index ed5bc9e..cd4458f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -2,6 +2,7 @@ #define __ASM_ARM_CPUTYPE_H #include <linux/stringify.h> +#include <linux/kernel.h> #define CPUID_ID 0 #define CPUID_CACHETYPE 1 diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index ee5e03e..3ad4c10 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -18,7 +18,7 @@ * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. * - 16 or 32 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) + * - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index c7afbc5..7e30874 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -126,7 +126,7 @@ #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model +#error Unknown cache maintenance model #endif #ifndef MULTI_CACHE diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 0ec35d1..fbf71d7 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -10,8 +10,8 @@ * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches - * when we're only targetting one class of TLB, or indirect calls - * when we're targetting multiple classes of TLBs. + * when we're only targeting one class of TLB, or indirect calls + * when we're targeting multiple classes of TLBs. */ #ifdef __KERNEL__ diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index f35b86e..e4a04e4 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -16,7 +16,7 @@ * make it not entierly compatible with the PL080 specification from * ARM. When in doubt, check the Samsung documentation first. * - * The Samsung defines are PL080S, and add an extra controll register, + * The Samsung defines are PL080S, and add an extra control register, * the ability to move more than 2^11 counts of data and some extra * OneNAND features. */ diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h new file mode 100644 index 0000000..70656b6 --- /dev/null +++ b/arch/arm/include/asm/i8253.h @@ -0,0 +1,15 @@ +#ifndef __ASMARM_I8253_H +#define __ASMARM_I8253_H + +/* i8253A PIT registers */ +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 + +#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) + +extern raw_spinlock_t i8253_lock; + +#define outb_pit outb_p +#define inb_pit inb_p + +#endif diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index bb8a19b..e46bdd0 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t; struct kprobe; typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); +typedef unsigned long (kprobe_check_cc)(unsigned long); + /* Architecture specific copy of original instruction. */ struct arch_specific_insn { kprobe_opcode_t *insn; kprobe_insn_handler_t *insn_handler; + kprobe_check_cc *insn_check_cc; }; struct prev_kprobe { diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 883f6be..d5adaae 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -34,7 +34,6 @@ * timer interrupt which may be pending. */ struct sys_timer { - struct sys_device dev; void (*init)(void); void (*suspend)(void); void (*resume)(void); diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 9a87823..832888d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -159,7 +159,7 @@ extern unsigned int user_debug; #include <mach/barriers.h> #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() #else #include <asm/memory.h> @@ -249,7 +249,7 @@ do { \ * cache totally. This means that the cache becomes inconsistent, and, * since we use normal loads/stores as well, this is really bad. * Typically, this causes oopsen in filp_close, but could have other, - * more disasterous effects. There are two work-arounds: + * more disastrous effects. There are two work-arounds: * 1. Disable interrupts and emulate the atomic swap * 2. Clean the cache, perform atomic swap, flush the cache * diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index c4391ba..1dc9806 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread) #define THREAD_NOTIFY_FLUSH 0 #define THREAD_NOTIFY_EXIT 1 #define THREAD_NOTIFY_SWITCH 2 +#define THREAD_NOTIFY_COPY 3 #endif #endif diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index 47f023a..14749ae 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -47,7 +47,7 @@ struct crunch_sigframe { #endif #ifdef CONFIG_IWMMXT -/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */ +/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */ #define IWMMXT_MAGIC 0x12ef842a #define IWMMXT_STORAGE_SIZE (IWMMXT_SIZE + 8) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c891eb7..87dbe3e 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -396,6 +396,10 @@ #define __NR_fanotify_init (__NR_SYSCALL_BASE+367) #define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) #define __NR_prlimit64 (__NR_SYSCALL_BASE+369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) +#define __NR_syncfs (__NR_SYSCALL_BASE+373) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 74554f1..8d95446 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM) += sleep.o +obj-$(CONFIG_PM_SLEEP) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 5c26ecc..7fbf28c 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -379,6 +379,10 @@ CALL(sys_fanotify_init) CALL(sys_fanotify_mark) CALL(sys_prlimit64) +/* 370 */ CALL(sys_name_to_handle_at) + CALL(sys_open_by_handle_at) + CALL(sys_clock_adjtime) + CALL(sys_syncfs) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1..9b05c6a 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch); void elf_set_personality(const struct elf32_hdr *x) { unsigned int eflags = x->e_flags; - unsigned int personality = PER_LINUX_32BIT; + unsigned int personality = current->personality & ~PER_MASK; + + /* + * We only support Linux ELF executables, so always set the + * personality to LINUX. + */ + personality |= PER_LINUX; /* * APCS-26 is only valid for OABI executables */ - if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) { - if (eflags & EF_ARM_APCS_26) - personality = PER_LINUX; - } + if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN && + (eflags & EF_ARM_APCS_26)) + personality &= ~ADDR_LIMIT_32BIT; + else + personality |= ADDR_LIMIT_32BIT; set_personality(personality); diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 8dbc126..87acc25 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info) */ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); isb(); + + /* + * Clear any configured vector-catch events before + * enabling monitor mode. + */ + asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + isb(); } if (enable_monitor_mode()) diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 2389131..15eeff6 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -34,9 +34,6 @@ * * *) If the PC is written to by the instruction, the * instruction must be fully simulated in software. - * If it is a conditional instruction, the handler - * will use insn[0] to copy its condition code to - * set r0 to 1 and insn[1] to "mov pc, lr" to return. * * *) Otherwise, a modified form of the instruction is * directly executed. Its handler calls the @@ -68,13 +65,17 @@ #define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) +#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos)) + +/* + * Test if load/store instructions writeback the address register. + * if P (bit 24) == 0 or W (bit 21) == 1 + */ +#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000) + #define PSR_fs (PSR_f|PSR_s) #define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ -#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */ - -#define truecc_insn(insn) (((insn) & 0xf0000000) | \ - (SET_R0_TRUE_INSTRUCTION & 0x0fffffff)) typedef long (insn_0arg_fn_t)(void); typedef long (insn_1arg_fn_t)(long); @@ -419,14 +420,10 @@ insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; long iaddr = (long)p->addr; int disp = branch_displacement(insn); - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 24)) regs->ARM_lr = iaddr + 4; @@ -446,14 +443,10 @@ static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rm = insn & 0xf; long rmv = regs->uregs[rm]; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - if (insn & (1 << 5)) regs->ARM_lr = (long)p->addr + 4; @@ -463,9 +456,16 @@ static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) regs->ARM_cpsr |= PSR_T_BIT; } +static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + unsigned long mask = 0xf8ff03df; /* Mask out execution state */ + regs->uregs[rd] = regs->ARM_cpsr & mask; +} + static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; int rn = (insn >> 16) & 0xf; int lbit = insn & (1 << 20); @@ -476,9 +476,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) int reg_bit_vector; int reg_count; - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - reg_count = 0; reg_bit_vector = insn & 0xffff; while (reg_bit_vector) { @@ -510,11 +507,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - - if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn)) - return; - regs->ARM_pc = (long)p->addr + str_pc_offset; simulate_ldm1stm1(p, regs); regs->ARM_pc = (long)p->addr + 4; @@ -525,24 +517,16 @@ static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) regs->uregs[12] = regs->uregs[13]; } -static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - - /* Save Rn in case of writeback. */ - regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); -} - static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) { insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; /* rm may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; /* Not following the C calling convention here, so need asm(). */ __asm__ __volatile__ ( @@ -554,29 +538,36 @@ static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) "str r0, %[rn] \n\t" /* in case of writeback */ "str r2, %[rd0] \n\t" "str r3, %[rd1] \n\t" - : [rn] "+m" (regs->uregs[rn]), + : [rn] "+m" (rnv), [rd0] "=m" (regs->uregs[rd]), [rd1] "=m" (regs->uregs[rd+1]) - : [rm] "m" (regs->uregs[rm]), + : [rm] "m" (rmv), [cpsr] "r" (regs->ARM_cpsr), [i_fn] "r" (i_fn) : "r0", "r1", "r2", "r3", "lr", "cc" ); + if (is_writeback(insn)) + regs->uregs[rn] = rnv; } static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) { insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; int rd = (insn >> 12) & 0xf; int rn = (insn >> 16) & 0xf; int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + /* rm/rmv may be invalid, don't care. */ + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rnv_wb; - regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], + rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], regs->uregs[rd+1], regs->ARM_cpsr, i_fn); + if (is_writeback(insn)) + regs->uregs[rn] = rnv_wb; } static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) @@ -630,31 +621,6 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */ } -static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs) -{ - insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - union reg_pair fnr; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - - fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn); - regs->uregs[rn] = fnr.r0; - regs->uregs[rd] = fnr.r1; -} - -static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - long rnv = regs->uregs[rn]; - long rdv = regs->uregs[rd]; - - insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn); -} - static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) { insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; @@ -688,32 +654,32 @@ static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs) { - insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - - regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs) { insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int ird = (insn >> 12) & 0xf; + int rd = (insn >> 12) & 0xf; + long rdv = regs->uregs[rd]; - insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn); } -static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs) +static void __kprobes +emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs) { - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; + int rd = (insn >> 12) & 0xf; + int rn = insn & 0xf; + long rdv = regs->uregs[rd]; long rnv = regs->uregs[rn]; - insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); + regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn); } static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) @@ -819,6 +785,17 @@ emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) } static void __kprobes +emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs) +{ + insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; + + insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); +} + +static void __kprobes emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) { insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; @@ -854,14 +831,34 @@ emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); } +static void __kprobes +emulate_alu_tests(struct kprobe *p, struct pt_regs *regs) +{ + insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; + kprobe_opcode_t insn = p->opcode; + long ppc = (long)p->addr + 8; + int rn = (insn >> 16) & 0xf; + int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */ + int rm = insn & 0xf; + long rnv = (rn == 15) ? ppc : regs->uregs[rn]; + long rmv = (rm == 15) ? ppc : regs->uregs[rm]; + long rsv = regs->uregs[rs]; + + insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); +} + static enum kprobe_insn __kprobes prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - int ibit = (insn & (1 << 26)) ? 25 : 22; + int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25)) + : (~insn & (1 << 22)); + + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ insn &= 0xfff00fff; insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - if (insn & (1 << ibit)) { + if (not_imm) { insn &= ~0xf; insn |= 2; /* Rm = r2 */ } @@ -871,20 +868,40 @@ prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) } static enum kprobe_insn __kprobes -prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rm0; + asi->insn_handler = emulate_rd12_modify; return INSN_GOOD; } static enum kprobe_insn __kprobes -prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi) +prep_emulate_rd12rn0_modify(kprobe_opcode_t insn, + struct arch_specific_insn *asi) { - insn &= 0xffff0fff; /* Rd = r0 */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0 */ + insn |= 0x00000001; /* Rn = r1 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_rd12rn0_modify; + return INSN_GOOD; +} + +static enum kprobe_insn __kprobes +prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + + insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; - asi->insn_handler = emulate_rd12; + asi->insn_handler = emulate_rd12rm0; return INSN_GOOD; } @@ -892,6 +909,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -903,6 +923,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -914,6 +937,9 @@ static enum kprobe_insn __kprobes prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16)) + return INSN_REJECTED; /* Rd is PC */ + insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ insn |= 0x00000102; /* Rs = r1, Rm = r2 */ asi->insn[0] = insn; @@ -925,6 +951,9 @@ static enum kprobe_insn __kprobes prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + if (is_r15(insn, 16) || is_r15(insn, 12)) + return INSN_REJECTED; /* RdHi or RdLo is PC */ + insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ insn |= 0x00001203; /* Rs = r2, Rm = r3 */ asi->insn[0] = insn; @@ -945,20 +974,13 @@ prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, static enum kprobe_insn __kprobes space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) { - /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */ - /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */ - /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */ - if ((insn & 0xfff30020) == 0xf1020000 || - (insn & 0xfe500f00) == 0xf8100a00 || - (insn & 0xfe5f0f00) == 0xf84d0500) - return INSN_REJECTED; - - /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */ - if ((insn & 0xfd700000) == 0xf4500000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rn16; - return INSN_GOOD; + /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */ + /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */ + /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */ + if ((insn & 0xfe300000) == 0xf4100000) { + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; } /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ @@ -967,41 +989,22 @@ space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD_NO_SLOT; } - /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ - /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0xffff00f0) == 0xf1010000 || - (insn & 0xff000010) == 0xfe000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } + /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */ + /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + + /* Coprocessor instructions... */ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ - if ((insn & 0xffe00000) == 0xfc400000) { - insn &= 0xfff00fff; /* Rn = r0 */ - insn |= 0x00001000; /* Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = - (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; - } + /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfe000000) == 0xfc000000) { - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; - } - - /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1010,19 +1013,18 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ if ((insn & 0x0f900010) == 0x01000000) { - /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ - /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0ff000f0) == 0x01200020 || - (insn & 0x0fb000f0) == 0x01200000) - return INSN_REJECTED; - - /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0fb00010) == 0x01000000) - return prep_emulate_rd12(insn, asi); + /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */ + if ((insn & 0x0ff000f0) == 0x01000000) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ + asi->insn_handler = simulate_mrs; + return INSN_GOOD_NO_SLOT; + } /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ if ((insn & 0x0ff00090) == 0x01400080) - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ @@ -1031,24 +1033,29 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return prep_emulate_rd16rs8rm0_wflags(insn, asi); /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ - /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */ - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */ + if ((insn & 0x0ff00090) == 0x01000080 || + (insn & 0x0ff000b0) == 0x01200080) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + + /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */ + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ else if ((insn & 0x0f900090) == 0x01000010) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070) - return INSN_REJECTED; - /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ if ((insn & 0x0ff000d0) == 0x01200010) { - asi->insn[0] = truecc_insn(insn); + if ((insn & 0x0ff000ff) == 0x0120003f) + return INSN_REJECTED; /* BLX pc */ asi->insn_handler = simulate_blx2bx; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ @@ -1059,17 +1066,27 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f9000f0) == 0x01000050) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + + /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */ + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ - else if ((insn & 0x0f000090) == 0x00000090) { + else if ((insn & 0x0f0000f0) == 0x00000090) { /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */ + /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ @@ -1078,13 +1095,15 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ - if ((insn & 0x0fe000f0) == 0x00000090) { - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - } else if ((insn & 0x0fe000f0) == 0x00200090) { - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - } else { - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); - } + if ((insn & 0x00d00000) == 0x00500000) + return INSN_REJECTED; + else if ((insn & 0x00e00000) == 0x00000000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else if ((insn & 0x00a00000) == 0x00200000) + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + else + return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, + asi); } /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ @@ -1092,23 +1111,45 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ - /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ - /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ + /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */ + /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ + /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */ + /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */ + /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */ + /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */ + + /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ - if ((insn & 0x0fb000f0) == 0x01000090) { - /* SWP/SWPB */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + if ((insn & 0x0f0000f0) == 0x01000090) { + if ((insn & 0x0fb000f0) == 0x01000090) { + /* SWP/SWPB */ + return prep_emulate_rd12rn16rm0_wflags(insn, + asi); + } else { + /* STREX/LDREX variants and unallocaed space */ + return INSN_REJECTED; + } + } else if ((insn & 0x0e1000d0) == 0x00000d0) { /* STRD/LDRD */ + if ((insn & 0x0000e000) == 0x0000e000) + return INSN_REJECTED; /* Rd is LR or PC */ + if (is_writeback(insn) && is_r15(insn, 16)) + return INSN_REJECTED; /* Writeback to PC */ + insn &= 0xfff00fff; insn |= 0x00002000; /* Rn = r0, Rd = r2 */ - if (insn & (1 << 22)) { - /* I bit */ + if (!(insn & (1 << 22))) { + /* Register index */ insn &= ~0xf; insn |= 1; /* Rm = r1 */ } @@ -1118,6 +1159,9 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) return INSN_GOOD; } + /* LDRH/STRH/LDRSB/LDRSH */ + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ return prep_emulate_ldr_str(insn, asi); } @@ -1125,7 +1169,7 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* * ALU op with S bit and Rd == 15 : - * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx + * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0e10f000) == 0x0010f000) return INSN_REJECTED; @@ -1154,22 +1198,61 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) insn |= 0x00000200; /* Rs = r2 */ } asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x01100000) { + /* + * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_rwflags : emulate_alu_rflags; + } return INSN_GOOD; } static enum kprobe_insn __kprobes space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ + /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fb00000) == 0x03000000) + return prep_emulate_rd12_modify(insn, asi); + + /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ + if ((insn & 0x0fff0000) == 0x03200000) { + unsigned op2 = insn & 0x000000ff; + if (op2 == 0x01 || op2 == 0x04) { + /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ + /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ + asi->insn[0] = insn; + asi->insn_handler = emulate_none; + return INSN_GOOD; + } else if (op2 <= 0x03) { + /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ + /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ + /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ + /* + * We make WFE and WFI true NOPs to avoid stalls due + * to missing events whilst processing the probe. + */ + asi->insn_handler = emulate_nop; + return INSN_GOOD_NO_SLOT; + } + /* For DBG and unallocated hints it's safest to reject them */ + return INSN_REJECTED; + } + /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ - (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1180,10 +1263,22 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xffff0fff; /* Rd = r0 */ + insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */ asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ + + if ((insn & 0x0f900000) == 0x03100000) { + /* + * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx + * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx + * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx + * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx + */ + asi->insn_handler = emulate_alu_tests_imm; + } else { + /* ALU ops which write to Rd */ + asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; + } return INSN_GOOD; } @@ -1192,6 +1287,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ if ((insn & 0x0ff000f0) == 0x068000b0) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ insn |= 0x00000001; /* Rm = r1 */ asi->insn[0] = insn; @@ -1205,6 +1302,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ if ((insn & 0x0fa00030) == 0x06a00010 || (insn & 0x0fb000f0) == 0x06a00030) { + if (is_r15(insn, 12)) + return INSN_REJECTED; /* Rd is PC */ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ asi->insn[0] = insn; asi->insn_handler = emulate_sat; @@ -1213,57 +1312,101 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ if ((insn & 0x0ff00070) == 0x06b00030 || - (insn & 0x0ff000f0) == 0x06f000b0) + (insn & 0x0ff00070) == 0x06f00030) return prep_emulate_rd12rm0(insn, asi); + /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ + /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */ + /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ + if ((insn & 0x0f800010) == 0x06000010) { + if ((insn & 0x00300000) == 0x00000000 || + (insn & 0x000000e0) == 0x000000a0 || + (insn & 0x000000e0) == 0x000000c0) + return INSN_REJECTED; /* Unallocated space */ + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0ff00030) == 0x06800010) + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ + /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */ + /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ + /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); + /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */ + if ((insn & 0x0f8000f0) == 0x06800070) { + if ((insn & 0x00300000) == 0x00100000) + return INSN_REJECTED; /* Unallocated space */ + + if ((insn & 0x000f0000) == 0x000f0000) + return prep_emulate_rd12rm0(insn, asi); + else + return prep_emulate_rd12rn16rm0_wflags(insn, asi); + } + + /* Other instruction encodings aren't yet defined */ + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1273,29 +1416,49 @@ space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) if ((insn & 0x0ff000f0) == 0x03f000f0) return INSN_REJECTED; - /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ - /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ - if ((insn & 0x0ff000f0) == 0x07800010) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ if ((insn & 0x0ff00090) == 0x07400010) return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ + /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ + /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ - /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ + /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */ + /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */ if ((insn & 0x0ff00090) == 0x07000010 || (insn & 0x0ff000d0) == 0x07500010 || - (insn & 0x0ff000d0) == 0x075000d0) + (insn & 0x0ff000f0) == 0x07800010) { + + if ((insn & 0x0000f000) == 0x0000f000) + return prep_emulate_rd16rs8rm0_wflags(insn, asi); + else + return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); + } + + /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ + if ((insn & 0x0ff000d0) == 0x075000d0) return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */ - /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ - /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ - return prep_emulate_rd16rs8rm0_wflags(insn, asi); + /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */ + /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */ + if ((insn & 0x0fa00070) == 0x07a00050) + return prep_emulate_rd12rm0(insn, asi); + + /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */ + /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */ + if ((insn & 0x0fe00070) == 0x07c00010) { + + if ((insn & 0x0000000f) == 0x0000000f) + return prep_emulate_rd12_modify(insn, asi); + else + return prep_emulate_rd12rn0_modify(insn, asi); + } + + return INSN_REJECTED; } static enum kprobe_insn __kprobes @@ -1309,6 +1472,10 @@ space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + + if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12)) + return INSN_REJECTED; /* LDRB into PC */ + return prep_emulate_ldr_str(insn, asi); } @@ -1323,10 +1490,9 @@ space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ simulate_stm1_pc : simulate_ldm1stm1; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes @@ -1334,58 +1500,117 @@ space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ - asi->insn[0] = truecc_insn(insn); asi->insn_handler = simulate_bbl; - return INSN_GOOD; + return INSN_GOOD_NO_SLOT; } static enum kprobe_insn __kprobes -space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + /* Coprocessor instructions... */ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ - insn &= 0xfff00fff; - insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr; - return INSN_GOOD; + /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + + /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + + return INSN_REJECTED; } -static enum kprobe_insn __kprobes -space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_eq(unsigned long cpsr) { - /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - insn &= 0xfff0ffff; /* Rn = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_ldcstc; - return INSN_GOOD; + return cpsr & PSR_Z_BIT; } -static enum kprobe_insn __kprobes -space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) +static unsigned long __kprobes __check_ne(unsigned long cpsr) { - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0xfff000f0) == 0xe1200070 || - (insn & 0x0f000000) == 0x0f000000) - return INSN_REJECTED; + return (~cpsr) & PSR_Z_BIT; +} - /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0x0f000010) == 0x0e000000) { - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } +static unsigned long __kprobes __check_cs(unsigned long cpsr) +{ + return cpsr & PSR_C_BIT; +} - /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12; - return INSN_GOOD; +static unsigned long __kprobes __check_cc(unsigned long cpsr) +{ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_mi(unsigned long cpsr) +{ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_pl(unsigned long cpsr) +{ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_vs(unsigned long cpsr) +{ + return cpsr & PSR_V_BIT; +} + +static unsigned long __kprobes __check_vc(unsigned long cpsr) +{ + return (~cpsr) & PSR_V_BIT; +} + +static unsigned long __kprobes __check_hi(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; } +static unsigned long __kprobes __check_ls(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ge(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_lt(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_gt(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_le(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; +} + +static unsigned long __kprobes __check_al(unsigned long cpsr) +{ + return true; +} + +static kprobe_check_cc * const condition_checks[16] = { + &__check_eq, &__check_ne, &__check_cs, &__check_cc, + &__check_mi, &__check_pl, &__check_vs, &__check_vc, + &__check_hi, &__check_ls, &__check_ge, &__check_lt, + &__check_gt, &__check_le, &__check_al, &__check_al +}; + /* Return: * INSN_REJECTED If instruction is one not allowed to kprobe, * INSN_GOOD If instruction is supported and uses instruction slot, @@ -1401,133 +1626,45 @@ space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi) enum kprobe_insn __kprobes arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) { + asi->insn_check_cc = condition_checks[insn>>28]; asi->insn[1] = KPROBE_RETURN_INSTRUCTION; - if ((insn & 0xf0000000) == 0xf0000000) { + if ((insn & 0xf0000000) == 0xf0000000) return space_1111(insn, asi); - } else if ((insn & 0x0e000000) == 0x00000000) { + else if ((insn & 0x0e000000) == 0x00000000) return space_cccc_000x(insn, asi); - } else if ((insn & 0x0e000000) == 0x02000000) { + else if ((insn & 0x0e000000) == 0x02000000) return space_cccc_001x(insn, asi); - } else if ((insn & 0x0f000010) == 0x06000010) { + else if ((insn & 0x0f000010) == 0x06000010) return space_cccc_0110__1(insn, asi); - } else if ((insn & 0x0f000010) == 0x07000010) { + else if ((insn & 0x0f000010) == 0x07000010) return space_cccc_0111__1(insn, asi); - } else if ((insn & 0x0c000000) == 0x04000000) { + else if ((insn & 0x0c000000) == 0x04000000) return space_cccc_01xx(insn, asi); - } else if ((insn & 0x0e000000) == 0x08000000) { + else if ((insn & 0x0e000000) == 0x08000000) return space_cccc_100x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0a000000) { + else if ((insn & 0x0e000000) == 0x0a000000) return space_cccc_101x(insn, asi); - } else if ((insn & 0x0fe00000) == 0x0c400000) { - - return space_cccc_1100_010x(insn, asi); - - } else if ((insn & 0x0e000000) == 0x0c000000) { - - return space_cccc_110x(insn, asi); - - } - - return space_cccc_111x(insn, asi); + return space_cccc_11xx(insn, asi); } void __init arm_kprobe_decode_init(void) { find_str_pc_offset(); } - - -/* - * All ARM instructions listed below. - * - * Instructions and their general purpose registers are given. - * If a particular register may not use R15, it is prefixed with a "!". - * If marked with a "*" means the value returned by reading R15 - * is implementation defined. - * - * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ - * TST: Rd, Rn, Rm, !Rs - * BX: Rm - * BLX(2): !Rm - * BX: Rm (R15 legal, but discouraged) - * BXJ: !Rm, - * CLZ: !Rd, !Rm - * CPY: Rd, Rm - * LDC/2,STC/2 immediate offset & unindex: Rn - * LDC/2,STC/2 immediate pre/post-indexed: !Rn - * LDM(1/3): !Rn, register_list - * LDM(2): !Rn, !register_list - * LDR,STR,PLD immediate offset: Rd, Rn - * LDR,STR,PLD register offset: Rd, Rn, !Rm - * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm - * LDR,STR immediate pre/post-indexed: Rd, !Rn - * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm - * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm - * LDRB,STRB immediate offset: !Rd, Rn - * LDRB,STRB register offset: !Rd, Rn, !Rm - * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm - * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn - * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm - * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn - * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm - * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm - * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn - * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm - * LDREX: !Rd, !Rn - * MCR/2: !Rd - * MCRR/2,MRRC/2: !Rd, !Rn - * MLA: !Rd, !Rn, !Rm, !Rs - * MOV: Rd - * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register) - * MRS,MSR: !Rd - * MUL: !Rd, !Rm, !Rs - * PKH{BT,TB}: !Rd, !Rn, !Rm - * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn - * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn - * REV/16/SH: !Rd, !Rm - * RFE: !Rn - * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm - * SEL: !Rd, !Rn, !Rm - * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs - * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs - * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs - * SSAT/16: !Rd, !Rm - * STM(1/2): !Rn, register_list* (R15 in reg list not recommended) - * STRT immediate pre/post-indexed: Rd*, !Rn - * STRT register pre/post-indexed: Rd*, !Rn, !Rm - * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm - * STREX: !Rd, !Rn, !Rm - * SWP/B: !Rd, !Rn, !Rm - * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm - * {S,U}XT{B,B16,H}: !Rd, !Rm - * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs - * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs - * - * May transfer control by writing R15 (possible mode changes or alternate - * mode accesses marked by "*"): - * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY, - * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI* - * - * Instructions that do not take general registers, nor transfer control: - * CDP/2, SETEND, SRS* - */ diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 2ba7deb..1656c87 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { regs->ARM_pc += 4; - p->ainsn.insn_handler(p, regs); + if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) + p->ainsn.insn_handler(p, regs); } /* diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c index 31a316c..0f107dc 100644 --- a/arch/arm/kernel/leds.c +++ b/arch/arm/kernel/leds.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/leds.h> @@ -69,36 +70,37 @@ static ssize_t leds_store(struct sys_device *dev, static SYSDEV_ATTR(event, 0200, NULL, leds_store); -static int leds_suspend(struct sys_device *dev, pm_message_t state) +static struct sysdev_class leds_sysclass = { + .name = "leds", +}; + +static struct sys_device leds_device = { + .id = 0, + .cls = &leds_sysclass, +}; + +static int leds_suspend(void) { leds_event(led_stop); return 0; } -static int leds_resume(struct sys_device *dev) +static void leds_resume(void) { leds_event(led_start); - return 0; } -static int leds_shutdown(struct sys_device *dev) +static void leds_shutdown(void) { leds_event(led_halted); - return 0; } -static struct sysdev_class leds_sysclass = { - .name = "leds", +static struct syscore_ops leds_syscore_ops = { .shutdown = leds_shutdown, .suspend = leds_suspend, .resume = leds_resume, }; -static struct sys_device leds_device = { - .id = 0, - .cls = &leds_sysclass, -}; - static int __init leds_init(void) { int ret; @@ -107,6 +109,8 @@ static int __init leds_init(void) ret = sysdev_register(&leds_device); if (ret == 0) ret = sysdev_create_file(&leds_device, &attr_event); + if (ret == 0) + register_syscore_ops(&leds_syscore_ops); return ret; } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 69cfee0..139e3c8 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -221,7 +221,7 @@ again: prev_raw_count &= armpmu->max_period; if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count; + delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; else delta = new_raw_count - prev_raw_count; @@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) tail = (struct frame_tail __user *)regs->ARM_fp - 1; - while (tail && !((unsigned long)tail & 0x3)) + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) tail = user_backtrace(tail, entry); } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 94bbedb..5e1e541 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, if (clone_flags & CLONE_SETTLS) thread->tp_value = regs->ARM_r3; + thread_notify(THREAD_NOTIFY_COPY, thread); + return 0; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 2bf27f3..8182f45 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request, #ifdef CONFIG_HAVE_HW_BREAKPOINT case PTRACE_GETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_gethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; case PTRACE_SETHBPREGS: + if (ptrace_get_breakpoints(child) < 0) + return -ESRCH; + ret = ptrace_sethbpregs(child, addr, (unsigned long __user *)data); + ptrace_put_breakpoints(child); break; #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index cb83983..0340224 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, return err; } -static inline void setup_syscall_restart(struct pt_regs *regs) -{ - regs->ARM_r0 = regs->ARM_ORIG_r0; - regs->ARM_pc -= thumb_mode(regs) ? 2 : 4; -} - /* * OK, we're invoking a handler */ static int handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, - struct pt_regs * regs, int syscall) + struct pt_regs * regs) { struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; @@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, int ret; /* - * If we were from a system call, check for system call restarting... - */ - if (syscall) { - switch (regs->ARM_r0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->ARM_r0 = -EINTR; - break; - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->ARM_r0 = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - setup_syscall_restart(regs); - } - } - - /* * translate the signal */ if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) @@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, */ static void do_signal(struct pt_regs *regs, int syscall) { + unsigned int retval = 0, continue_addr = 0, restart_addr = 0; struct k_sigaction ka; siginfo_t info; int signr; @@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall) if (!user_mode(regs)) return; + /* + * If we were from a system call, check for system call restarting... + */ + if (syscall) { + continue_addr = regs->ARM_pc; + restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4); + retval = regs->ARM_r0; + + /* + * Prepare for system call restart. We do this here so that a + * debugger will see the already changed PSW. + */ + switch (retval) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->ARM_r0 = regs->ARM_ORIG_r0; + regs->ARM_pc = restart_addr; + break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; + } + } + if (try_to_freeze()) goto no_signal; + /* + * Get the signal to deliver. When running under ptrace, at this + * point the debugger may change all our registers ... + */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { sigset_t *oldset; + /* + * Depending on the signal settings we may need to revert the + * decision to restart the system call. But skip this if a + * debugger has chosen to restart at a different PC. + */ + if (regs->ARM_pc == restart_addr) { + if (retval == -ERESTARTNOHAND + || (retval == -ERESTARTSYS + && !(ka.sa.sa_flags & SA_RESTART))) { + regs->ARM_r0 = -EINTR; + regs->ARM_pc = continue_addr; + } + } + if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else oldset = ¤t->blocked; - if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) { + if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { /* * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, @@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall) } no_signal: - /* - * No signal to deliver to the process - restart the syscall. - */ if (syscall) { - if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) { + /* + * Handle restarting a different system call. As above, + * if a debugger has chosen to restart at a different PC, + * ignore the restart. + */ + if (retval == -ERESTART_RESTARTBLOCK + && regs->ARM_pc == continue_addr) { if (thumb_mode(regs)) { regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; regs->ARM_pc -= 2; @@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall) #endif } } - if (regs->ARM_r0 == -ERESTARTNOHAND || - regs->ARM_r0 == -ERESTARTSYS || - regs->ARM_r0 == -ERESTARTNOINTR) { - setup_syscall_restart(regs); - } /* If there's no signal to deliver, we just put the saved sigmask * back. diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8fe05ad..007a0a9 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode, { } -static void broadcast_timer_setup(struct clock_event_device *evt) +static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -560,10 +560,7 @@ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) break; case IPI_RESCHEDULE: - /* - * nothing more to do - eveything is - * done on the interrupt return path - */ + scheduler_ipi(); break; case IPI_CALL_FUNC: diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 7a57609..40ee7e5 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data, if (res == 0) { /* - * Barrier also required between aquiring a lock for a + * Barrier also required between acquiring a lock for a * protected resource and accessing the resource. Inserted for * same reason as above. */ diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 4ad8da1..af0aaeb 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid, long err; int i; - if (nsops < 1) + if (nsops < 1 || nsops > SEMOPM) return -EINVAL; sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL); if (!sops) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 1ff46ca..cb634c3 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -21,7 +21,7 @@ #include <linux/timex.h> #include <linux/errno.h> #include <linux/profile.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/timer.h> #include <linux/irq.h> @@ -115,48 +115,37 @@ void timer_tick(void) #endif #if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS) -static int timer_suspend(struct sys_device *dev, pm_message_t state) +static int timer_suspend(void) { - struct sys_timer *timer = container_of(dev, struct sys_timer, dev); - - if (timer->suspend != NULL) - timer->suspend(); + if (system_timer->suspend) + system_timer->suspend(); return 0; } -static int timer_resume(struct sys_device *dev) +static void timer_resume(void) { - struct sys_timer *timer = container_of(dev, struct sys_timer, dev); - - if (timer->resume != NULL) - timer->resume(); - - return 0; + if (system_timer->resume) + system_timer->resume(); } #else #define timer_suspend NULL #define timer_resume NULL #endif -static struct sysdev_class timer_sysclass = { - .name = "timer", +static struct syscore_ops timer_syscore_ops = { .suspend = timer_suspend, .resume = timer_resume, }; -static int __init timer_init_sysfs(void) +static int __init timer_init_syscore_ops(void) { - int ret = sysdev_class_register(&timer_sysclass); - if (ret == 0) { - system_timer->dev.cls = &timer_sysclass; - ret = sysdev_register(&system_timer->dev); - } + register_syscore_ops(&timer_syscore_ops); - return ret; + return 0; } -device_initcall(timer_init_sysfs); +device_initcall(timer_init_syscore_ops); void __init time_init(void) { diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f0000e1..3b54ad1 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -410,8 +410,7 @@ static int bad_syscall(int n, struct pt_regs *regs) struct thread_info *thread = current_thread_info(); siginfo_t info; - if (current->personality != PER_LINUX && - current->personality != PER_LINUX_32BIT && + if ((current->personality & PER_MASK) != PER_LINUX && thread->exec_domain->handler) { thread->exec_domain->handler(n, regs); return regs->ARM_r0; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 1939023..2d299bf 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -83,6 +83,7 @@ config ARCH_AT91CAP9 select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL + select HAVE_NET_MACB config ARCH_AT572D940HF bool "AT572D940HF" diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 2e74a19..295e1e7 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependant */ +/* FIXME: user dependent */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 1f9d3cb..d8df59a 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -30,6 +30,11 @@ #include <mach/board.h> #include "generic.h" +static void __init at91eb01_init_irq(void) +{ + at91x40_init_interrupts(NULL); +} + static void __init at91eb01_map_io(void) { at91x40_initialize(40000000); @@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, - .init_irq = at91x40_init_interrupts, + .init_irq = at91eb01_init_irq, .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 27ac6f5..02182c1 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -102,7 +102,7 @@ #define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ #define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ #define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ +#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ #define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ #define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ #define AT91_MCI_OVRE (1 << 30) /* Overrun */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 3bef931..0700f21 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -27,6 +27,7 @@ #define ARCH_ID_AT91SAM9G45 0x819b05a0 #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + static inline unsigned long at91_exid_identify(void) { return at91_sys_read(AT91_DBGU_EXID); @@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91sam9m11() (0) #endif +#ifdef CONFIG_ARCH_AT91SAM9X5 +#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#else +#define cpu_is_at91sam9x5() (0) +#define cpu_is_at91sam9g15() (0) +#define cpu_is_at91sam9g35() (0) +#define cpu_is_at91sam9x35() (0) +#define cpu_is_at91sam9g25() (0) +#define cpu_is_at91sam9x25() (0) +#endif + #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) #define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index ddeb645..056dc66 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -208,7 +208,7 @@ extern void at91_gpio_resume(void); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should +/* wrappers for "new style" GPIO calls. the old AT91-specific ones should * eventually be removed (along with this errno.h inclusion), and the * gpio request/free calls should probably be implemented. */ diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c index 77f84b4..a1f3283 100644 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c @@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Config /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Cha /** * @brief Read data DMAed to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurat /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 8d1baf3..d87ad30 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring); * Configures a DMA channel. * * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. @@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle) /** * Initializes all of the data structures associated with the DMA. * @return -* >= 0 - Initialization was successfull. +* >= 0 - Initialization was successful. * * -EBUSY - Device is currently being used. * -ENODEV - Device handed in is invalid. diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h index 6c8da2b..e6a1dc4 100644 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configurati /** * @brief Read data DMA transferred to memory * -* This function will read data that has been DMAed to memory while transfering from: +* This function will read data that has been DMAed to memory while transferring from: * - Memory to memory * - Peripheral to memory * @@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle * /****************************************************************************/ /** -* @brief Check the existance of pending descriptor +* @brief Check the existence of pending descriptor * * This function confirmes if there is any pending descriptor in the chain * to program the channel @@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void); /** * @brief Sets channel specific user data * -* This function associates user data to a specif DMA channel +* This function associates user data to a specific DMA channel * */ /****************************************************************************/ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h index 70eaea8..1619733 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h @@ -180,7 +180,7 @@ typedef enum { #define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ -/* Programable pin defines */ +/* Programmable pin defines */ #define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) /* GPIO pin 0 - 60 */ #define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h index c78833a..03238c2 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h @@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void) /****************************************************************************/ /** -* @brief Lower layer funtion to enable/disable a clock of a certain device +* @brief Lower layer function to enable/disable a clock of a certain device * * This function enables/disables a core clock * diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h index e01fc46..0aeb6a6 100644 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h @@ -109,9 +109,9 @@ #define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM) /* INTC1 - interrupt controller 1 */ -#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */ +#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */ #define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */ -#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */ +#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interrupt (For A0 only)) */ #define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */ #define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */ /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h index 06a3554..0992842 100644 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -88,7 +88,7 @@ /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ /* Enable wait pin during burst write or read */ #define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ #define REG_UMI_TCR_LOWFREQ 0x40000000 /* 1=synch write, 0=async write */ #define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32f1479..c0deaca 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM644x EVM @@ -72,6 +73,7 @@ config MACH_SFFSDR depends on ARCH_DAVINCI_DM644x select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. @@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM select MACH_DAVINCI_DM6467TEVM select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM depends on ARCH_DAVINCI_DM365 select MISC_DEVICES select EEPROM_AT24 + select I2C help Configure this option to specify whether the board used for development is a DM365 EVM @@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM select GPIO_PCF857X select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -205,6 +210,7 @@ config MACH_MITYOMAPL138 depends on ARCH_DAVINCI_DA850 select MISC_DEVICES select EEPROM_AT24 + select I2C help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 2aa79c5..606a6f2 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -29,7 +29,7 @@ #include <mach/mux.h> #include <mach/spi.h> -#define MITYOMAPL138_PHY_ID "0:03" +#define MITYOMAPL138_PHY_ID "" #define FACTORY_CONFIG_MAGIC 0x012C0138 #define FACTORY_CONFIG_VERSION 0x00010001 @@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = { static struct platform_device mityomapl138_nandflash_device = { .name = "davinci_nand", - .id = 0, + .id = 1, .dev = { .platform_data = &mityomapl138_nandflash_data, }, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c389ff..3e7be2d 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -11,7 +11,7 @@ * DM644X-EVM board. It has: * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionaly realtime clock, IR remote control receiver, + * Additionally realtime clock, IR remote control receiver, * IR Blaster based on MSP430 (firmware although is different * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive * with PATA interface, two muxed red-green leds. diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 4a68c2b..41669ec 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -94,9 +94,7 @@ static int davinci_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return ret; - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, - dev_driver_string(cpufreq.dev), - "transition: %u --> %u\n", freqs.old, freqs.new); + dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); ret = cpufreq_frequency_table_target(policy, pdata->freq_table, freqs.new, relation, &idx); @@ -167,7 +165,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accomodate addition of drivers + * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ policy->cpuinfo.transition_latency = 2000 * 1000; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68fe4c2..b95b919 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1123,7 +1123,7 @@ void __init da850_init(void) * This helps keeping the peripherals on this domain insulated * from CPU frequency changes caused by DVFS. The firmware sets * both PLL0 and PLL1 to the same frequency so, there should not - * be any noticible change even in non-DVFS use cases. + * be any noticeable change even in non-DVFS use cases. */ da850_set_async3_src(1); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 625d4b6..58a02dc 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -39,7 +39,8 @@ #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 -#define DA8XX_SPI1_BASE 0x01f0e000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA850_SPI1_BASE 0x01f0e000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 @@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = { static struct resource da8xx_spi1_resources[] = { [0] = { - .start = DA8XX_SPI1_BASE, - .end = DA8XX_SPI1_BASE + SZ_4K - 1, + .start = DA830_SPI1_BASE, + .end = DA830_SPI1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, da8xx_spi_pdata[instance].num_chipselect = len; + if (instance == 1 && cpu_is_davinci_da850()) { + da8xx_spi1_resources[0].start = DA850_SPI1_BASE; + da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1; + } + return platform_device_register(&da8xx_spi_device[instance]); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 76364d1..a3a94e9 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9a2376b..4c82c27 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why cant' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index cea6b89..957fb87 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -4,7 +4,7 @@ * Author: Kevin Hilman, Deep Root Systems, LLC * * Defines the cpu_is_*() macros for runtime detection of DaVinci - * device type. In addtion, if support for a given device is not + * device type. In addition, if support for a given device is not * compiled in to the kernel, the macros return 0 so that * resulting code can be optimized out. * diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 9f1befc..f8b7ea4 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -24,6 +24,9 @@ #define UART_SHIFT 2 +#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 @@ -34,7 +37,7 @@ davinci_uart_virt: .word 0 /* Use davinci_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldreq \rp, =davinci_uart_v2p(davinci_uart_phys) ldrne \rp, =davinci_uart_phys add \rv, \rp, #4 @ davinci_uart_virt ldr \rp, [\rp, #0] @@ -48,18 +51,18 @@ davinci_uart_virt: .word 0 tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldreq \rv, =davinci_uart_v2p(davinci_uart_phys) ldrne \rv, =davinci_uart_phys ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #0] str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldreq \rv, =davinci_uart_v2p(davinci_uart_virt) ldrne \rv, =davinci_uart_virt ldreq \rp, =DAVINCI_UART_INFO - ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO) ldr \rp, [\rp, #4] str \rp, [\rv] diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 8051110..c9e6ce1 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -22,7 +22,7 @@ * * This area sits just below the page tables (see arch/arm/kernel/head.S). */ -#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) +#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8) #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index 180b8a9..a5a9ff7 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { /* - * map discontiguous hw irq range to continous sw irq range: + * map discontiguous hw irq range to continuous sw irq range: * * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) */ diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h index 939728b..be9266b 100644 --- a/arch/arm/mach-exynos4/include/mach/gpio.h +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ +/* Practically, GPIO banks up to GPZ are the configurable gpio banks */ /* GPIO bank sizes */ #define EXYNOS4_GPIO_A0_NR (8) diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index af82a8f..14ac10b 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* update interrupt count buffer */ exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); - /* enable MCT tick interupt */ + /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 10d917d..8755ca8 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <asm/cacheflush.h> @@ -372,7 +373,27 @@ void exynos4_scu_enable(void __iomem *scu_base) flush_cache_all(); } -static int exynos4_pm_resume(struct sys_device *dev) +static struct sysdev_driver exynos4_pm_driver = { + .add = exynos4_pm_add, +}; + +static __init int exynos4_pm_drvinit(void) +{ + unsigned int tmp; + + s3c_pm_init(); + + /* All wakeup disable */ + + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp |= ((0xFF << 8) | (0x1F << 1)); + __raw_writel(tmp, S5P_WAKEUP_MASK); + + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); +} +arch_initcall(exynos4_pm_drvinit); + +static void exynos4_pm_resume(void) { /* For release retention */ @@ -394,27 +415,15 @@ static int exynos4_pm_resume(struct sys_device *dev) /* enable L2X0*/ writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); #endif - - return 0; } -static struct sysdev_driver exynos4_pm_driver = { - .add = exynos4_pm_add, +static struct syscore_ops exynos4_pm_syscore_ops = { .resume = exynos4_pm_resume, }; -static __init int exynos4_pm_drvinit(void) +static __init int exynos4_pm_syscore_init(void) { - unsigned int tmp; - - s3c_pm_init(); - - /* All wakeup disable */ - - tmp = __raw_readl(S5P_WAKEUP_MASK); - tmp |= ((0xFF << 8) | (0x1F << 1)); - __raw_writel(tmp, S5P_WAKEUP_MASK); - - return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); + register_syscore_ops(&exynos4_pm_syscore_ops); + return 0; } -arch_initcall(exynos4_pm_drvinit); +arch_initcall(exynos4_pm_syscore_init); diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 1b3d3a2d..e8d08bf 100644 --- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ + /* Data pin GPK1[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ + /* Data pin GPK0[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 85f9433..1e83f8c 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ ctrl2 = readl(r + S3C_SDHCI_CONTROL2); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index bdd2579..46adca0 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -4,6 +4,7 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" + select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA @@ -59,6 +60,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" + select CLKSRC_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index 441c6ce..7020f1a 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -10,53 +10,16 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/spinlock.h> #include <linux/timex.h> #include <asm/irq.h> - +#include <asm/i8253.h> #include <asm/mach/time.h> #include "common.h" -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 - -#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) - -static cycle_t pit_read(struct clocksource *cs) -{ - unsigned long flags; - static int old_count; - static u32 old_jifs; - int count; - u32 jifs; - - raw_local_irq_save(flags); - - jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; - - if (count > old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_local_irq_restore(flags); - - count = (PIT_LATCH - 1) - count; - - return (cycle_t)(jifs * PIT_LATCH) + count; -} - -static struct clocksource pit_cs = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), -}; +DEFINE_RAW_SPINLOCK(i8253_lock); static void pit_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) @@ -121,7 +84,7 @@ static void __init isa_timer_init(void) pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce); pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce); - clocksource_register_hz(&pit_cs, PIT_TICK_RATE); + clocksource_i8253_init(); setup_irq(pit_ce.irq, &pit_timer_irq); clockevents_register_device(&pit_ce); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 980803f..d3e9645 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -24,7 +24,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/string.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/amba/bus.h> #include <linux/amba/kmi.h> #include <linux/clocksource.h> @@ -180,13 +180,13 @@ static void __init ap_init_irq(void) #ifdef CONFIG_PM static unsigned long ic_irq_enable; -static int irq_suspend(struct sys_device *dev, pm_message_t state) +static int irq_suspend(void) { ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE); return 0; } -static int irq_resume(struct sys_device *dev) +static void irq_resume(void) { /* disable all irq sources */ writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); @@ -194,33 +194,25 @@ static int irq_resume(struct sys_device *dev) writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET); - return 0; } #else #define irq_suspend NULL #define irq_resume NULL #endif -static struct sysdev_class irq_class = { - .name = "irq", +static struct syscore_ops irq_syscore_ops = { .suspend = irq_suspend, .resume = irq_resume, }; -static struct sys_device irq_device = { - .id = 0, - .cls = &irq_class, -}; - -static int __init irq_init_sysfs(void) +static int __init irq_syscore_init(void) { - int ret = sysdev_class_register(&irq_class); - if (ret == 0) - ret = sysdev_register(&irq_device); - return ret; + register_syscore_ops(&irq_syscore_ops); + + return 0; } -device_initcall(irq_init_sysfs); +device_initcall(irq_syscore_init); /* * Flash handling. diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 773ea0c..ba3dae3 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where) /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atux_pci_status(int clear) @@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = { /* This routine checks the status of the last configuration cycle. If an error * was detected it returns >0, else it returns a 0. The errors being checked * are parity, master abort, target abort (master and target). These types of - * errors occure during a config cycle where there is no device, like during + * errors occur during a config cycle where there is no device, like during * the discovery stage. */ static int iop13xx_atue_pci_status(int clear) diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index f781164..24294b2 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -15,7 +15,7 @@ /**************************************************************************** * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * the QNAP firmware. * Layout as used by QNAP: * 0x00000000-0x00080000 : "U-Boot" diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index e76d41b..b9c8059 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -41,7 +41,7 @@ * DRAM clocking and refresh are slightly different for systems with DDR * DRAM or regular SDRAM devices. If SDRAM is used in the system, the * SDRAM will still be accessible in direct-run mode. In DDR based systems, - * a transistion to direct-run mode will stop all DDR accesses (no clocks). + * a transition to direct-run mode will stop all DDR accesses (no clocks). * Because of this, the code to switch power modes and the code to enter * and exit DRAM self-refresh modes must not be executed in DRAM. A small * section of IRAM is used instead for this. diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ee8b02e..7bfb827 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (192) +#define NR_BUILTIN_GPIO IRQ_GPIO_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 4621067..713be15 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -8,6 +8,15 @@ #define MFP_DRIVE_MEDIUM (0x2 << 13) #define MFP_DRIVE_FAST (0x3 << 13) +#undef MFP_CFG +#undef MFP_CFG_DRV + +#define MFP_CFG(pin, af) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV(pin, af, drv) \ + (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index aeb9ae2..99833b9 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -9,7 +9,7 @@ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com> * 2008-10-08: Bin Yang <bin.yang@marvell.com> * - * The timers module actually includes three timers, each timer with upto + * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index 7ffbd98..805d4ee 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse) } } - /* Set wait states for CPU inbetween frequency changes */ + /* Set wait states for CPU between frequency changes */ reg_clkctl = readl(A11S_CLK_CNTL_ADDR); reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ writel(reg_clkctl, A11S_CLK_CNTL_ADDR); diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 7f56861..6a96911 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -160,10 +160,7 @@ static struct msm_mmc_platform_data qsd8x50_sdc1_data = { static void __init qsd8x50_init_mmc(void) { - if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) - vreg_mmc = vreg_get(NULL, "gp6"); - else - vreg_mmc = vreg_get(NULL, "gp5"); + vreg_mmc = vreg_get(NULL, "gp5"); if (IS_ERR(vreg_mmc)) { pr_err("vreg get for vreg_mmc failed (%ld)\n", diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index cfa808d..232f97a 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock); * @id: command to be executed * @buf: buffer returned from scm_get_command_buffer() * - * An SCM command is layed out in memory as follows: + * An SCM command is laid out in memory as follows: * * ------------------- <--- struct scm_command * | command header | diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 56f920c..38b95e9 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -269,7 +269,7 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) - return; + return 0; writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c index 2cf390f..47a69cb 100644 --- a/arch/arm/mach-mx3/mach-vpr200.c +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; +static int vpr200_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, + MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY); +} + /* USB HOST config */ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { - .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, + .init = vpr200_usbh_init, + .portsc = MXC_EHCI_MODE_SERIAL, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 10a1bea..6206b11 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { .wakeup = wake, \ } -static const struct gpio_keys_button loco_buttons[] __initconst = { +static struct gpio_keys_button loco_buttons[] = { GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 1ad97fe..5dcc59d 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ unsigned long diff, parent_rate, calc_rate; \ int i; \ \ - parent_rate = clk_get_rate(clk->parent); \ div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \ bm_busy = BM_CLKCTRL_##dr##_BUSY; \ \ if (clk->parent == &ref_xtal_clk) { \ + parent_rate = clk_get_rate(clk->parent); \ div = DIV_ROUND_UP(parent_rate, rate); \ if (clk == &cpu_clk) { \ div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \ @@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ if (div == 0 || div > div_max) \ return -EINVAL; \ } else { \ + /* \ + * hack alert: this block modifies clk->parent, too, \ + * so the base to use it the grand parent. \ + */ \ + parent_rate = clk_get_rate(clk->parent->parent); \ rate >>= PARENT_RATE_SHIFT; \ parent_rate >>= PARENT_RATE_SHIFT; \ diff = parent_rate; \ diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 927d5a1..c1c5fb6 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -79,7 +79,7 @@ /* - * Register useage + * Register usage * r8 - temporary * r9 - the driver buffer * r10 - temporary diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d41fe2d..0ad781d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -399,7 +399,7 @@ static void __init omap_sx1_init(void) sx1_mmc_init(); /* turn on USB power */ - /* sx1_setusbpower(1); cant do it here because i2c is not ready */ + /* sx1_setusbpower(1); can't do it here because i2c is not ready */ gpio_request(1, "A_IRDA_OFF"); gpio_request(11, "A_SWITCH"); gpio_request(15, "A_USB_ON"); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index b0f4c23..36f26c3 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {} * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h index 7a2df29..23eed00 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -31,7 +31,7 @@ #endif /* - * These are the offsets from the begining of the fiq_buffer. They are put here + * These are the offsets from the beginning of the fiq_buffer. They are put here * since the buffer and header need to be accessed by drivers servicing devices * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. */ diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 6588c22..fe31d93 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -24,75 +24,50 @@ #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) { - struct clk *iclk, *fclk; - int ret = 0; + int ret; dev_dbg(dev, "%s\n", __func__); ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; - fclk = clk_get(dev, "fck"); - if (!IS_ERR(fclk)) { - clk_disable(fclk); - clk_put(fclk); - } - - iclk = clk_get(dev, "ick"); - if (!IS_ERR(iclk)) { - clk_disable(iclk); - clk_put(iclk); + ret = pm_runtime_clk_suspend(dev); + if (ret) { + pm_generic_runtime_resume(dev); + return ret; } return 0; -}; +} static int omap1_pm_runtime_resume(struct device *dev) { - struct clk *iclk, *fclk; - dev_dbg(dev, "%s\n", __func__); - iclk = clk_get(dev, "ick"); - if (!IS_ERR(iclk)) { - clk_enable(iclk); - clk_put(iclk); - } + pm_runtime_clk_resume(dev); + return pm_generic_runtime_resume(dev); +} - fclk = clk_get(dev, "fck"); - if (!IS_ERR(fclk)) { - clk_enable(fclk); - clk_put(fclk); - } +static struct dev_power_domain default_power_domain = { + .ops = { + .runtime_suspend = omap1_pm_runtime_suspend, + .runtime_resume = omap1_pm_runtime_resume, + USE_PLATFORM_PM_SLEEP_OPS + }, +}; - return pm_generic_runtime_resume(dev); +static struct pm_clk_notifier_block platform_bus_notifier = { + .pwr_domain = &default_power_domain, + .con_ids = { "ick", "fck", NULL, }, }; static int __init omap1_pm_runtime_init(void) { - const struct dev_pm_ops *pm; - struct dev_pm_ops *omap_pm; - if (!cpu_class_is_omap1()) return -ENODEV; - pm = platform_bus_get_pm_ops(); - if (!pm) { - pr_err("%s: unable to get dev_pm_ops from platform_bus\n", - __func__); - return -ENODEV; - } - - omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); - if (!omap_pm) { - pr_err("%s: unable to alloc memory for new dev_pm_ops\n", - __func__); - return -ENOMEM; - } - - omap_pm->runtime_suspend = omap1_pm_runtime_suspend; - omap_pm->runtime_resume = omap1_pm_runtime_resume; - - platform_bus_set_pm_ops(omap_pm); + pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; } diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd64..66dfbcc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -59,16 +59,16 @@ endif # Power Management ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ - cpuidle34xx.o pm_bus.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o + cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5f8a2fd..34cf982 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -696,7 +696,7 @@ static void __init igep2_init(void) igep2_init_smsc911x(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep2_wlan_bt_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index b10db0e..2cf86c3 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -440,7 +440,7 @@ static void __init igep3_init(void) igep3_leds_init(); /* - * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ igep3_wifi_bt_init(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895..f8ba20a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index b2b1e37..d6e34dd 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); + clk->rate = rate; return 0; } diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 276992d..8c96567 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_fck, CK_443X), - /* - * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility - * with OMAP2/3. - */ - CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab87854..6cb6c03 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 85b3dce..5823584 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -125,7 +125,7 @@ struct clockdomain { }; /** - * struct clkdm_ops - Arch specfic function implementations + * struct clkdm_ops - Arch specific function implementations * @clkdm_add_wkdep: Add a wakeup dependency between clk domains * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains * @clkdm_read_wkdep: Read wakeup dependency state between clk domains diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec8..38830d8 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 6952794..da53ba3 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index a44c523..1c240ef 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); /** * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states upto and including this for mpu domain - * @core_deepest_state: Enable states upto and including this for core domain + * @mpu_deepest_state: Enable states up to and including this for mpu domain + * @core_deepest_state: Enable states up to and including this for core domain * * This goes through the list of states available and enables and disables the * validity of C states based on deepest state that can be achieved for the diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 84d1b73..7b85585 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data ARRAY_SIZE(omap_keyboard_latency), 0); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } @@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) od = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -725,7 +725,7 @@ static int __init omap_init_wdt(void) od = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 34922b2..c9ff0e7 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 413de18..9529842 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) kfree(pdata); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 137e1a5..b2f30be 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); if (IS_ERR(od)) { - WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 565b906..4a6ef6a 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); if (IS_ERR(od)) { - pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); return PTR_ERR(od); } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index bb043cb..a4ab1e3 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) seq_printf(s, "/* %s */\n", m->muxnames[mode]); /* - * XXX: Might be revisited to support differences accross + * XXX: Might be revisited to support differences across * same OMAP generation. */ seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def); diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h index adbea0d..9fd9314 100644 --- a/arch/arm/mach-omap2/mux2430.h +++ b/arch/arm/mach-omap2/mux2430.h @@ -22,7 +22,7 @@ * absolute addresses. The name in the macro is the mode-0 name of * the pin. NOTE: These registers are 8-bits wide. * - * Note that these defines use SDMMC instead of MMC for compability + * Note that these defines use SDMMC instead of MMC for compatibility * with signal names used in 3630. */ #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8eb3ce1..c4d0ae8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a860fb5..9682dd5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { * I2CHS IP's do not follow the usual pattern. * prcm_reg_id alone cannot be used to program * the iclk and fclk. Needs to be handled using - * additonal flags when clk handling is moved + * additional flags when clk handling is moved * to hwmod framework. */ .module_offs = CORE_MOD, @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", @@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b98e2df..909a84d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", @@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3..abc548a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 5f2da756..4321e79 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e2e605f..05f6abc 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on) else /* * Enable VBUS Valid, AValid and IDDIG - * high impedence + * high impedance */ __raw_writel(IDDIG | AVALID | VBUSVALID, ctrl_base + USBOTGHS_CONTROL); } else { - /* Enable session END and IDIG to high impedence. */ + /* Enable session END and IDIG to high impedance. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 0a8e74e..07d6140 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -308,7 +308,7 @@ int __init omap3_twl_init(void) * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, * in those scenarios this bit is to be cleared (enable = false). * - * Returns 0 on sucess, error is returned if I2C read/write fails. + * Returns 0 on success, error is returned if I2C read/write fails. */ int __init omap3_twl_set_sr_bit(bool enable) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af335..49486f5 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c deleted file mode 100644 index 5acd2ab..0000000 --- a/arch/arm/mach-omap2/pm_bus.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Runtime PM support code for OMAP - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * Copyright (C) 2010 Texas Instruments, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/pm_runtime.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> - -#include <plat/omap_device.h> -#include <plat/omap-pm.h> - -#ifdef CONFIG_PM_RUNTIME -static int omap_pm_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int r, ret = 0; - - dev_dbg(dev, "%s\n", __func__); - - ret = pm_generic_runtime_suspend(dev); - - if (!ret && dev->parent == &omap_device_parent) { - r = omap_device_idle(pdev); - WARN_ON(r); - } - - return ret; -}; - -static int omap_pm_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int r; - - dev_dbg(dev, "%s\n", __func__); - - if (dev->parent == &omap_device_parent) { - r = omap_device_enable(pdev); - WARN_ON(r); - } - - return pm_generic_runtime_resume(dev); -}; -#else -#define omap_pm_runtime_suspend NULL -#define omap_pm_runtime_resume NULL -#endif /* CONFIG_PM_RUNTIME */ - -static int __init omap_pm_runtime_init(void) -{ - const struct dev_pm_ops *pm; - struct dev_pm_ops *omap_pm; - - pm = platform_bus_get_pm_ops(); - if (!pm) { - pr_err("%s: unable to get dev_pm_ops from platform_bus\n", - __func__); - return -ENODEV; - } - - omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); - if (!omap_pm) { - pr_err("%s: unable to alloc memory for new dev_pm_ops\n", - __func__); - return -ENOMEM; - } - - omap_pm->runtime_suspend = omap_pm_runtime_suspend; - omap_pm->runtime_resume = omap_pm_runtime_resume; - - platform_bus_set_pm_ops(omap_pm); - - return 0; -} -core_initcall(omap_pm_runtime_init); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 49c6513..9af0847 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specfic implementations + * @custom_funcs: func pointers for arch specific implementations * * Loop through the array of powerdomains @pwrdm_list, registering all * that are available on the current CPU. If pwrdm_list is supplied diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 027f40b..d23d979 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -121,7 +121,7 @@ struct powerdomain { }; /** - * struct pwrdm_ops - Arch specfic function implementations + * struct pwrdm_ops - Arch specific function implementations * @pwrdm_set_next_pwrst: Set the target power state for a pd * @pwrdm_read_next_pwrst: Read the target power state set for a pd * @pwrdm_read_pwrst: Read the current power state of a pd diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 9c9c113..469a920 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { /* * The USBTLL Save-and-Restore mechanism is broken on - * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * 3430s up to ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 * diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 8f674c9..13e24f9 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) * driver register and sr device intializtion API's. Only one call * will ultimately succeed. * - * Currenly this function registers interrrupt handler for a particular SR + * Currently this function registers interrrupt handler for a particular SR * if smartreflex class driver is already registered and has * requested for interrupts and the SR interrupt line in present. */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6facf7..0c1552d 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; @@ -851,7 +850,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, * @voltdm: pointer to the VDD whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed - * to be at and resets the voltage to that level. Should be used expecially + * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ void omap_voltage_reset(struct voltagedomain *voltdm) @@ -912,7 +911,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * This API searches only through the non-compensated voltages int the * voltage table. * Returns pointer to the voltage table entry corresponding to volt on - * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage + * success. Returns -ENODATA if no voltage table exisits for the passed voltage * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 1a5d6a0..5ceafdc 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -19,7 +19,7 @@ #include "common.h" /* - * The Orion has fully programable address map. There's a separate address + * The Orion has fully programmable address map. There's a separate address * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB, * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own * address decode windows that allow it to access any of the Orion resources. diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 429ecaf..a5930f8 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -190,7 +190,7 @@ err_free_1: * The power front LEDs (blue and red) and SATA red LEDs are controlled via a * single GPIO line and are compatible with the leds-gpio driver. * - * The SATA blue LEDs have some hardware blink capabilities which are detailled + * The SATA blue LEDs have some hardware blink capabilities which are detailed * in the following array: * * SATAx blue LED | SATAx activity | LED state diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index f0f43e1..e6d6449 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -36,7 +36,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92f393f..9eac819 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -56,7 +56,7 @@ /**************************************************************************** * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with + * partitions on the device because we want to keep compatibility with * existing QNAP firmware. * * Layout as used by QNAP: diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index bfbecec..810a982 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c index 1ce0904..1d5859d 100644 --- a/arch/arm/mach-pxa/clock-pxa2xx.c +++ b/arch/arm/mach-pxa/clock-pxa2xx.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/pxa2xx-regs.h> @@ -33,32 +33,22 @@ const struct clkops clk_pxa2xx_cken_ops = { #ifdef CONFIG_PM static uint32_t saved_cken; -static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state) +static int pxa2xx_clock_suspend(void) { saved_cken = CKEN; return 0; } -static int pxa2xx_clock_resume(struct sys_device *d) +static void pxa2xx_clock_resume(void) { CKEN = saved_cken; - return 0; } #else #define pxa2xx_clock_suspend NULL #define pxa2xx_clock_resume NULL #endif -struct sysdev_class pxa2xx_clock_sysclass = { - .name = "pxa2xx-clock", +struct syscore_ops pxa2xx_clock_syscore_ops = { .suspend = pxa2xx_clock_suspend, .resume = pxa2xx_clock_resume, }; - -static int __init pxa2xx_clock_init(void) -{ - if (cpu_is_pxa2xx()) - return sysdev_class_register(&pxa2xx_clock_sysclass); - return 0; -} -postcore_initcall(pxa2xx_clock_init); diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c index 3f864cd..2a37a9a 100644 --- a/arch/arm/mach-pxa/clock-pxa3xx.c +++ b/arch/arm/mach-pxa/clock-pxa3xx.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> @@ -182,7 +183,7 @@ const struct clkops clk_pxa3xx_pout_ops = { static uint32_t cken[2]; static uint32_t accr; -static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state) +static int pxa3xx_clock_suspend(void) { cken[0] = CKENA; cken[1] = CKENB; @@ -190,28 +191,18 @@ static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state) return 0; } -static int pxa3xx_clock_resume(struct sys_device *d) +static void pxa3xx_clock_resume(void) { ACCR = accr; CKENA = cken[0]; CKENB = cken[1]; - return 0; } #else #define pxa3xx_clock_suspend NULL #define pxa3xx_clock_resume NULL #endif -struct sysdev_class pxa3xx_clock_sysclass = { - .name = "pxa3xx-clock", +struct syscore_ops pxa3xx_clock_syscore_ops = { .suspend = pxa3xx_clock_suspend, .resume = pxa3xx_clock_resume, }; - -static int __init pxa3xx_clock_init(void) -{ - if (cpu_is_pxa3xx() || cpu_is_pxa95x()) - return sysdev_class_register(&pxa3xx_clock_sysclass); - return 0; -} -postcore_initcall(pxa3xx_clock_init); diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index f9f349a..1f2fb9c 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -1,5 +1,5 @@ #include <linux/clkdev.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> struct clkops { void (*enable)(struct clk *); @@ -54,7 +54,7 @@ extern const struct clkops clk_pxa2xx_cken_ops; void clk_pxa2xx_cken_enable(struct clk *clk); void clk_pxa2xx_cken_disable(struct clk *clk); -extern struct sysdev_class pxa2xx_clock_sysclass; +extern struct syscore_ops pxa2xx_clock_syscore_ops; #if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ @@ -74,5 +74,6 @@ extern const struct clkops clk_pxa3xx_smemc_ops; extern void clk_pxa3xx_cken_enable(struct clk *); extern void clk_pxa3xx_cken_disable(struct clk *); -extern struct sysdev_class pxa3xx_clock_sysclass; +extern struct syscore_ops pxa3xx_clock_syscore_ops; + #endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index b88d601..13518a7 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -10,7 +10,6 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <linux/gpio.h> #include <linux/delay.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 8225e2e..a109967 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -10,7 +10,7 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <linux/gpio.h> @@ -388,7 +388,7 @@ static inline void cmx2xx_init_display(void) {} #ifdef CONFIG_PM static unsigned long sleep_save_msc[10]; -static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state) +static int cmx2xx_suspend(void) { cmx2xx_pci_suspend(); @@ -412,7 +412,7 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int cmx2xx_resume(struct sys_device *dev) +static void cmx2xx_resume(void) { cmx2xx_pci_resume(); @@ -420,27 +420,18 @@ static int cmx2xx_resume(struct sys_device *dev) __raw_writel(sleep_save_msc[0], MSC0); __raw_writel(sleep_save_msc[1], MSC1); __raw_writel(sleep_save_msc[2], MSC2); - - return 0; } -static struct sysdev_class cmx2xx_pm_sysclass = { - .name = "pm", +static struct syscore_ops cmx2xx_pm_syscore_ops = { .resume = cmx2xx_resume, .suspend = cmx2xx_suspend, }; -static struct sys_device cmx2xx_pm_device = { - .cls = &cmx2xx_pm_sysclass, -}; - static int __init cmx2xx_pm_init(void) { - int error; - error = sysdev_class_register(&cmx2xx_pm_sysclass); - if (error == 0) - error = sysdev_register(&cmx2xx_pm_device); - return error; + register_syscore_ops(&cmx2xx_pm_syscore_ops); + + return 0; } #else static int __init cmx2xx_pm_init(void) { return 0; } diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 81c3c43..d28e802 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/gpio.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 44c1b77..80538b8 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/pwm_backlight.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/sysdev.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 6fc5d32..7545a48 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/ucb1400.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index a079d8b..e6c9344 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -61,10 +61,10 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #define pxa3xx_get_clk_frequency_khz(x) (0) #endif -extern struct sysdev_class pxa_irq_sysclass; -extern struct sysdev_class pxa_gpio_sysclass; -extern struct sysdev_class pxa2xx_mfp_sysclass; -extern struct sysdev_class pxa3xx_mfp_sysclass; +extern struct syscore_ops pxa_irq_syscore_ops; +extern struct syscore_ops pxa_gpio_syscore_ops; +extern struct syscore_ops pxa2xx_mfp_syscore_ops; +extern struct syscore_ops pxa3xx_mfp_syscore_ops; void __init pxa_set_ffuart_info(void *info); void __init pxa_set_btuart_info(void *info); diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 6de0ad0..9cdcca5 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index b024a8b..c463950 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -99,11 +99,24 @@ #define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -#define NR_BUILTIN_GPIO 128 +#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +static inline int irq_to_gpio(unsigned int irq) +{ + int gpio; + + if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) + return irq - IRQ_GPIO0; + + gpio = irq - PXA_GPIO_IRQ_BASE; + if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) + return gpio; + + return -1; +} #ifdef CONFIG_CPU_PXA26x /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index a4285fc..0384024 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -93,9 +93,6 @@ #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index e4fb466..207ecb4 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -38,7 +38,7 @@ #define PCMD(x) __REG(0x40F50110 + ((x) << 2)) /* - * Slave Power Managment Unit + * Slave Power Management Unit */ #define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ #define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index faa408a..0641f31 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -64,7 +64,7 @@ /* * CPLD registers: - * Only 4 registers, but spreaded over a 32MB address space. + * Only 4 registers, but spread over a 32MB address space. * Be gentle, and remap that over 32kB... */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 6251e3f..32ed551 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/irq.h> @@ -183,7 +183,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; -static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) +static int pxa_irq_suspend(void) { int i; @@ -202,7 +202,7 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int pxa_irq_resume(struct sys_device *dev) +static void pxa_irq_resume(void) { int i; @@ -218,22 +218,13 @@ static int pxa_irq_resume(struct sys_device *dev) __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i)); __raw_writel(1, IRQ_BASE + ICCR); - return 0; } #else #define pxa_irq_suspend NULL #define pxa_irq_resume NULL #endif -struct sysdev_class pxa_irq_sysclass = { - .name = "irq", +struct syscore_ops pxa_irq_syscore_ops = { .suspend = pxa_irq_suspend, .resume = pxa_irq_resume, }; - -static int __init pxa_irq_init(void) -{ - return sysdev_class_register(&pxa_irq_sysclass); -} - -core_initcall(pxa_irq_init); diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index f5de541..6cf8180 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -159,30 +159,22 @@ static void __init lpd270_init_irq(void) #ifdef CONFIG_PM -static int lpd270_irq_resume(struct sys_device *dev) +static void lpd270_irq_resume(void) { __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); - return 0; } -static struct sysdev_class lpd270_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops lpd270_irq_syscore_ops = { .resume = lpd270_irq_resume, }; -static struct sys_device lpd270_irq_device = { - .cls = &lpd270_irq_sysclass, -}; - static int __init lpd270_irq_device_init(void) { - int ret = -ENODEV; if (machine_is_logicpd_pxa270()) { - ret = sysdev_class_register(&lpd270_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lpd270_irq_device); + register_syscore_ops(&lpd270_irq_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(lpd270_irq_device_init); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 3ede978..e10ddb8 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> @@ -176,31 +176,22 @@ static void __init lubbock_init_irq(void) #ifdef CONFIG_PM -static int lubbock_irq_resume(struct sys_device *dev) +static void lubbock_irq_resume(void) { LUB_IRQ_MASK_EN = lubbock_irq_enabled; - return 0; } -static struct sysdev_class lubbock_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops lubbock_irq_syscore_ops = { .resume = lubbock_irq_resume, }; -static struct sys_device lubbock_irq_device = { - .cls = &lubbock_irq_sysclass, -}; - static int __init lubbock_irq_device_init(void) { - int ret = -ENODEV; - if (machine_is_lubbock()) { - ret = sysdev_class_register(&lubbock_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lubbock_irq_device); + register_syscore_ops(&lubbock_irq_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(lubbock_irq_device_init); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index a72993d..9984ef7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = { static struct regulator_init_data bq24022_init_data = { .constraints = { .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), .consumer_supplies = bq24022_consumers, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 95163ba..3479e2b 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> @@ -185,31 +185,21 @@ static void __init mainstone_init_irq(void) #ifdef CONFIG_PM -static int mainstone_irq_resume(struct sys_device *dev) +static void mainstone_irq_resume(void) { MST_INTMSKENA = mainstone_irq_enabled; - return 0; } -static struct sysdev_class mainstone_irq_sysclass = { - .name = "cpld_irq", +static struct syscore_ops mainstone_irq_syscore_ops = { .resume = mainstone_irq_resume, }; -static struct sys_device mainstone_irq_device = { - .cls = &mainstone_irq_sysclass, -}; - static int __init mainstone_irq_device_init(void) { - int ret = -ENODEV; + if (machine_is_mainstone()) + register_syscore_ops(&mainstone_irq_syscore_ops); - if (machine_is_mainstone()) { - ret = sysdev_class_register(&mainstone_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&mainstone_irq_device); - } - return ret; + return 0; } device_initcall(mainstone_irq_device_init); diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 1d1419b..87ae312 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/gpio.h> #include <mach/pxa2xx-regs.h> @@ -338,7 +338,7 @@ static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; static unsigned long saved_pgsr[4]; -static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) +static int pxa2xx_mfp_suspend(void) { int i; @@ -365,7 +365,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) return 0; } -static int pxa2xx_mfp_resume(struct sys_device *d) +static void pxa2xx_mfp_resume(void) { int i; @@ -376,15 +376,13 @@ static int pxa2xx_mfp_resume(struct sys_device *d) PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; - return 0; } #else #define pxa2xx_mfp_suspend NULL #define pxa2xx_mfp_resume NULL #endif -struct sysdev_class pxa2xx_mfp_sysclass = { - .name = "mfp", +struct syscore_ops pxa2xx_mfp_syscore_ops = { .suspend = pxa2xx_mfp_suspend, .resume = pxa2xx_mfp_resume, }; @@ -409,6 +407,6 @@ static int __init pxa2xx_mfp_init(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); - return sysdev_class_register(&pxa2xx_mfp_sysclass); + return 0; } postcore_initcall(pxa2xx_mfp_init); diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 7a270ee..89863a0 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -17,7 +17,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/mfp-pxa3xx.h> @@ -31,13 +31,13 @@ * a pull-down mode if they're an active low chip select, and we're * just entering standby. */ -static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) +static int pxa3xx_mfp_suspend(void) { mfp_config_lpm(); return 0; } -static int pxa3xx_mfp_resume(struct sys_device *d) +static void pxa3xx_mfp_resume(void) { mfp_config_run(); @@ -47,24 +47,13 @@ static int pxa3xx_mfp_resume(struct sys_device *d) * preserve them here in case they will be referenced later */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - return 0; } #else #define pxa3xx_mfp_suspend NULL #define pxa3xx_mfp_resume NULL #endif -struct sysdev_class pxa3xx_mfp_sysclass = { - .name = "mfp", +struct syscore_ops pxa3xx_mfp_syscore_ops = { .suspend = pxa3xx_mfp_suspend, - .resume = pxa3xx_mfp_resume, + .resume = pxa3xx_mfp_resume, }; - -static int __init mfp_init_devicefs(void) -{ - if (cpu_is_pxa3xx()) - return sysdev_class_register(&pxa3xx_mfp_sysclass); - - return 0; -} -postcore_initcall(mfp_init_devicefs); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dd13bb6..e347013 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -22,7 +22,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/input.h> #include <linux/delay.h> #include <linux/gpio_keys.h> @@ -458,7 +458,7 @@ static struct platform_device strataflash = { /* * Suspend/Resume bootstrap management * - * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, + * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, * this sequence is as follows : * - disables interrupts * - initialize SDRAM (self refresh RAM into active RAM) @@ -488,7 +488,7 @@ static void install_bootstrap(void) } -static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) +static int mioa701_sys_suspend(void) { int i = 0, is_bt_on; u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); @@ -514,7 +514,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) return 0; } -static int mioa701_sys_resume(struct sys_device *sysdev) +static void mioa701_sys_resume(void) { int i = 0; u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); @@ -527,43 +527,18 @@ static int mioa701_sys_resume(struct sys_device *sysdev) *mem_resume_enabler = save_buffer[i++]; *mem_resume_bt = save_buffer[i++]; *mem_resume_unknown = save_buffer[i++]; - - return 0; } -static struct sysdev_class mioa701_sysclass = { - .name = "mioa701", -}; - -static struct sys_device sysdev_bootstrap = { - .cls = &mioa701_sysclass, -}; - -static struct sysdev_driver driver_bootstrap = { - .suspend = &mioa701_sys_suspend, - .resume = &mioa701_sys_resume, +static struct syscore_ops mioa701_syscore_ops = { + .suspend = mioa701_sys_suspend, + .resume = mioa701_sys_resume, }; static int __init bootstrap_init(void) { - int rc; int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3); - rc = sysdev_class_register(&mioa701_sysclass); - if (rc) { - printk(KERN_ERR "Failed registering mioa701 sys class\n"); - return -ENODEV; - } - rc = sysdev_register(&sysdev_bootstrap); - if (rc) { - printk(KERN_ERR "Failed registering mioa701 sys device\n"); - return -ENODEV; - } - rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap); - if (rc) { - printk(KERN_ERR "Failed registering PMU sys driver\n"); - return -ENODEV; - } + register_syscore_ops(&mioa701_syscore_ops); save_buffer = kmalloc(save_size, GFP_KERNEL); if (!save_buffer) @@ -576,9 +551,7 @@ static int __init bootstrap_init(void) static void bootstrap_exit(void) { kfree(save_buffer); - sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap); - sysdev_unregister(&sysdev_bootstrap); - sysdev_class_unregister(&mioa701_sysclass); + unregister_syscore_ops(&mioa701_syscore_ops); printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" "resume !!!\n"); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index a6f898c..4061ecd 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,7 +24,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/sysdev.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 8aadad5..20d1b18 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -25,7 +25,6 @@ #include <linux/pwm_backlight.h> #include <linux/gpio.h> #include <linux/power_supply.h> -#include <linux/sysdev.h> #include <linux/w1-gpio.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 3b8a4f3..65f24f0 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -19,7 +19,7 @@ */ #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/gpio_keys.h> @@ -233,9 +233,9 @@ static struct palmz72_resume_info palmz72_resume_info = { static unsigned long store_ptr; -/* sys_device for Palm Zire 72 PM */ +/* syscore_ops for Palm Zire 72 PM */ -static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) +static int palmz72_pm_suspend(void) { /* setup the resume_info struct for the original bootloader */ palmz72_resume_info.resume_addr = (u32) cpu_resume; @@ -249,31 +249,23 @@ static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) return 0; } -static int palmz72_pm_resume(struct sys_device *dev) +static void palmz72_pm_resume(void) { *PALMZ72_SAVE_DWORD = store_ptr; - return 0; } -static struct sysdev_class palmz72_pm_sysclass = { - .name = "palmz72_pm", +static struct syscore_ops palmz72_pm_syscore_ops = { .suspend = palmz72_pm_suspend, .resume = palmz72_pm_resume, }; -static struct sys_device palmz72_pm_device = { - .cls = &palmz72_pm_sysclass, -}; - static int __init palmz72_pm_init(void) { - int ret = -ENODEV; if (machine_is_palmz72()) { - ret = sysdev_class_register(&palmz72_pm_sysclass); - if (ret == 0) - ret = sysdev_register(&palmz72_pm_device); + register_syscore_ops(&palmz72_pm_syscore_ops); + return 0; } - return ret; + return -ENODEV; } device_initcall(palmz72_pm_init); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6bde595..fed363c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -21,7 +21,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/suspend.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <asm/mach/map.h> @@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) @@ -350,21 +350,9 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa_device_asoc_platform, }; -static struct sys_device pxa25x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa2xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa2xx_clock_sysclass, - } -}; - static int __init pxa25x_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa25x()) { @@ -377,11 +365,10 @@ static int __init pxa25x_init(void) pxa25x_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) { - ret = sysdev_register(&pxa25x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 1cb5d0f..2fecbec 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -16,7 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> @@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = IRQ_TO_GPIO(d->irq); + int gpio = irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) @@ -428,21 +428,9 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa27x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa2xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa2xx_clock_sysclass, - } -}; - static int __init pxa27x_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa27x()) { @@ -455,11 +443,10 @@ static int __init pxa27x_init(void) pxa27x_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) { - ret = sysdev_register(&pxa27x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa2xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8dd1073..8521d7d 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -20,7 +20,7 @@ #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> @@ -427,21 +427,9 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa3xx_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa3xx_mfp_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa3xx_clock_sysclass, - } -}; - static int __init pxa3xx_init(void) { - int i, ret = 0; + int ret = 0; if (cpu_is_pxa3xx()) { @@ -462,11 +450,10 @@ static int __init pxa3xx_init(void) pxa3xx_init_pm(); - for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) { - ret = sysdev_register(&pxa3xx_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa3xx_mfp_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 23b229b..ecc82a3 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -18,7 +18,7 @@ #include <linux/i2c/pxa-i2c.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -260,16 +260,6 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; -static struct sys_device pxa95x_sysdev[] = { - { - .cls = &pxa_irq_sysclass, - }, { - .cls = &pxa_gpio_sysclass, - }, { - .cls = &pxa3xx_clock_sysclass, - } -}; - static int __init pxa95x_init(void) { int ret = 0, i; @@ -293,11 +283,9 @@ static int __init pxa95x_init(void) if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; - for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) { - ret = sysdev_register(&pxa95x_sysdev[i]); - if (ret) - pr_err("failed to register sysdev[%d]\n", i); - } + register_syscore_ops(&pxa_irq_syscore_ops); + register_syscore_ops(&pxa_gpio_syscore_ops); + register_syscore_ops(&pxa3xx_clock_syscore_ops); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index cd18613..d130f77 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/kernel.h> -#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 232b731..7992305 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -6,7 +6,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <mach/smemc.h> @@ -16,7 +16,7 @@ static unsigned long msc[2]; static unsigned long sxcnfg, memclkcfg; static unsigned long csadrcfg[4]; -static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state) +static int pxa3xx_smemc_suspend(void) { msc[0] = __raw_readl(MSC0); msc[1] = __raw_readl(MSC1); @@ -30,7 +30,7 @@ static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int pxa3xx_smemc_resume(struct sys_device *dev) +static void pxa3xx_smemc_resume(void) { __raw_writel(msc[0], MSC0); __raw_writel(msc[1], MSC1); @@ -40,34 +40,19 @@ static int pxa3xx_smemc_resume(struct sys_device *dev) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); - - return 0; } -static struct sysdev_class smemc_sysclass = { - .name = "smemc", +static struct syscore_ops smemc_syscore_ops = { .suspend = pxa3xx_smemc_suspend, .resume = pxa3xx_smemc_resume, }; -static struct sys_device smemc_sysdev = { - .id = 0, - .cls = &smemc_sysclass, -}; - static int __init smemc_init(void) { - int ret = 0; + if (cpu_is_pxa3xx()) + register_syscore_ops(&smemc_syscore_ops); - if (cpu_is_pxa3xx()) { - ret = sysdev_class_register(&smemc_sysclass); - if (ret) - return ret; - - ret = sysdev_register(&smemc_sysdev); - } - - return ret; + return 0; } subsys_initcall(smemc_init); #endif diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index b9cfbeb..687417a 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index b523f11..903218e 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -44,6 +44,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/syscore_ops.h> #include <mach/pxa25x.h> #include <mach/audio.h> @@ -130,20 +131,19 @@ static u8 viper_hw_version(void) return v1; } -/* CPU sysdev */ -static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state) +/* CPU system core operations. */ +static int viper_cpu_suspend(void) { viper_icr_set_bit(VIPER_ICR_R_DIS); return 0; } -static int viper_cpu_resume(struct sys_device *sysdev) +static void viper_cpu_resume(void) { viper_icr_clear_bit(VIPER_ICR_R_DIS); - return 0; } -static struct sysdev_driver viper_cpu_sysdev_driver = { +static struct syscore_ops viper_cpu_syscore_ops = { .suspend = viper_cpu_suspend, .resume = viper_cpu_resume, }; @@ -945,7 +945,7 @@ static void __init viper_init(void) viper_init_vcore_gpios(); viper_init_cpufreq(); - sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver); + register_syscore_ops(&viper_cpu_syscore_ops); if (version) { pr_info("viper: hardware v%di%d detected. " diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index f71d377..67bd414 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -16,7 +16,6 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> -#include <linux/sysdev.h> #include <linux/usb/gpio_vbus.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h index 0c5d749..9a73219 100644 --- a/arch/arm/mach-realview/include/mach/barriers.h +++ b/arch/arm/mach-realview/include/mach/barriers.h @@ -4,5 +4,5 @@ * operation to deadlock the system. */ #define mb() dsb() -#define rmb() dmb() +#define rmb() dsb() #define wmb() mb() diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index cf68136..b2b2a5b 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -19,7 +19,7 @@ #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ /* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) + * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle * the allocation of hardware channels to clients. */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 7f7c529..988a686 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -101,7 +101,7 @@ #define S3C2410_BANKCON_PMC16 (0x03) /* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on + * 6 and 7 have different configurations depending on * the memory type bits */ #define S3C2410_BANKCON_Tacp2 (0x0 << 2) diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index 5e2f353..2854129 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -23,38 +23,12 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <plat/cpu.h> #include <plat/pm.h> -static int s3c2410_irq_add(struct sys_device *sysdev) -{ - return 0; -} - -static struct sysdev_driver s3c2410_irq_driver = { - .add = s3c2410_irq_add, +struct syscore_ops s3c24xx_irq_syscore_ops = { .suspend = s3c24xx_irq_suspend, .resume = s3c24xx_irq_resume, }; - -static int __init s3c2410_irq_init(void) -{ - return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver); -} - -arch_initcall(s3c2410_irq_init); - -static struct sysdev_driver s3c2410a_irq_driver = { - .add = s3c2410_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; - -static int __init s3c2410a_irq_init(void) -{ - return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver); -} - -arch_initcall(s3c2410a_irq_init); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 2970ea9..1e2d536 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -17,7 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/dm9000.h> @@ -214,17 +214,16 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { /* NAND Flash on BAST board */ #ifdef CONFIG_PM -static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) +static int bast_pm_suspend(void) { /* ensure that an nRESET is not generated on resume. */ gpio_direction_output(S3C2410_GPA(21), 1); return 0; } -static int bast_pm_resume(struct sys_device *sd) +static void bast_pm_resume(void) { s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); - return 0; } #else @@ -232,16 +231,11 @@ static int bast_pm_resume(struct sys_device *sd) #define bast_pm_resume NULL #endif -static struct sysdev_class bast_pm_sysclass = { - .name = "mach-bast", +static struct syscore_ops bast_pm_syscore_ops = { .suspend = bast_pm_suspend, .resume = bast_pm_resume, }; -static struct sys_device bast_pm_sysdev = { - .cls = &bast_pm_sysclass, -}; - static int smartmedia_map[] = { 0 }; static int chip0_map[] = { 1 }; static int chip1_map[] = { 2 }; @@ -642,8 +636,7 @@ static void __init bast_map_io(void) static void __init bast_init(void) { - sysdev_class_register(&bast_pm_sysclass); - sysdev_register(&bast_pm_sysdev); + register_syscore_ops(&bast_pm_syscore_ops); s3c_i2c0_set_platdata(&bast_i2c_info); s3c_nand_set_platdata(&bast_nand_info); diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 66f4444..079dcaa 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; -/* This is the blue LED on the device. Originaly used to indicate GPS activity +/* This is the blue LED on the device. Originally used to indicate GPS activity * by flashing. */ static struct s3c24xx_led_platdata n35_blue_led_pdata = { .name = "blue_led", diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 725636f..4728f9a 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/time.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/gpio.h> #include <linux/io.h> @@ -92,7 +93,7 @@ static void s3c2410_pm_prepare(void) } } -static int s3c2410_pm_resume(struct sys_device *dev) +static void s3c2410_pm_resume(void) { unsigned long tmp; @@ -104,10 +105,12 @@ static int s3c2410_pm_resume(struct sys_device *dev) if ( machine_is_aml_m5900() ) s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - - return 0; } +struct syscore_ops s3c2410_pm_syscore_ops = { + .resume = s3c2410_pm_resume, +}; + static int s3c2410_pm_add(struct sys_device *dev) { pm_cpu_prep = s3c2410_pm_prepare; @@ -119,7 +122,6 @@ static int s3c2410_pm_add(struct sys_device *dev) #if defined(CONFIG_CPU_S3C2410) static struct sysdev_driver s3c2410_pm_driver = { .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, }; /* register ourselves */ @@ -133,7 +135,6 @@ arch_initcall(s3c2410_pm_drvinit); static struct sysdev_driver s3c2410a_pm_driver = { .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, }; static int __init s3c2410a_pm_drvinit(void) @@ -147,7 +148,6 @@ arch_initcall(s3c2410a_pm_drvinit); #if defined(CONFIG_CPU_S3C2440) static struct sysdev_driver s3c2440_pm_driver = { .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, }; static int __init s3c2440_pm_drvinit(void) @@ -161,7 +161,6 @@ arch_initcall(s3c2440_pm_drvinit); #if defined(CONFIG_CPU_S3C2442) static struct sysdev_driver s3c2442_pm_driver = { .add = s3c2410_pm_add, - .resume = s3c2410_pm_resume, }; static int __init s3c2442_pm_drvinit(void) diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index adc90a3..f1d3bd8 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -40,6 +41,7 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/pll.h> +#include <plat/pm.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -168,6 +170,9 @@ int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); + register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + return sysdev_register(&s3c2410_sysdev); } diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index f3355d2..1a1aa22 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -202,8 +202,6 @@ static int s3c2412_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2412_irq_driver = { .add = s3c2412_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, }; static int s3c2412_irq_init(void) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 923e01b..85dcaeb 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -17,7 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/i2c.h> @@ -486,7 +486,7 @@ static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { /* Jive power management device */ #ifdef CONFIG_PM -static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) +static int jive_pm_suspend(void) { /* Write the magic value u-boot uses to check for resume into * the INFORM0 register, and ensure INFORM1 is set to the @@ -498,10 +498,9 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) return 0; } -static int jive_pm_resume(struct sys_device *sd) +static void jive_pm_resume(void) { __raw_writel(0x0, S3C2412_INFORM0); - return 0; } #else @@ -509,16 +508,11 @@ static int jive_pm_resume(struct sys_device *sd) #define jive_pm_resume NULL #endif -static struct sysdev_class jive_pm_sysclass = { - .name = "jive-pm", +static struct syscore_ops jive_pm_syscore_ops = { .suspend = jive_pm_suspend, .resume = jive_pm_resume, }; -static struct sys_device jive_pm_sysdev = { - .cls = &jive_pm_sysclass, -}; - static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); @@ -536,10 +530,9 @@ static void jive_power_off(void) static void __init jive_machine_init(void) { - /* register system devices for managing low level suspend */ + /* register system core operations for managing low level suspend */ - sysdev_class_register(&jive_pm_sysclass); - sysdev_register(&jive_pm_sysdev); + register_syscore_ops(&jive_pm_syscore_ops); /* write our sleep configurations for the IO. Pull down all unused * IO, ensure that we have turned off all peripherals we do not diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index a7417c4..752b13a 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -86,13 +87,24 @@ static struct sleep_save s3c2412_sleep[] = { SAVE_ITEM(S3C2413_GPJSLPCON), }; -static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) +static struct sysdev_driver s3c2412_pm_driver = { + .add = s3c2412_pm_add, +}; + +static __init int s3c2412_pm_init(void) +{ + return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); +} + +arch_initcall(s3c2412_pm_init); + +static int s3c2412_pm_suspend(void) { s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } -static int s3c2412_pm_resume(struct sys_device *dev) +static void s3c2412_pm_resume(void) { unsigned long tmp; @@ -102,18 +114,9 @@ static int s3c2412_pm_resume(struct sys_device *dev) __raw_writel(tmp, S3C2412_PWRCFG); s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); - return 0; } -static struct sysdev_driver s3c2412_pm_driver = { - .add = s3c2412_pm_add, +struct syscore_ops s3c2412_pm_syscore_ops = { .suspend = s3c2412_pm_suspend, .resume = s3c2412_pm_resume, }; - -static __init int s3c2412_pm_init(void) -{ - return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver); -} - -arch_initcall(s3c2412_pm_init); diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 4c6df51..ef0958d 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -244,5 +245,8 @@ int __init s3c2412_init(void) { printk("S3C2412: Initialising architecture\n"); + register_syscore_ops(&s3c2412_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + return sysdev_register(&s3c2412_sysdev); } diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 77b38f2..28ad20d 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -236,8 +236,6 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2416_irq_driver = { .add = s3c2416_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, }; static int __init s3c2416_irq_init(void) diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 4a04205..41db2b2 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -11,6 +11,7 @@ */ #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <asm/cacheflush.h> @@ -55,30 +56,26 @@ static int s3c2416_pm_add(struct sys_device *sysdev) return 0; } -static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state) +static struct sysdev_driver s3c2416_pm_driver = { + .add = s3c2416_pm_add, +}; + +static __init int s3c2416_pm_init(void) { - return 0; + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver); } -static int s3c2416_pm_resume(struct sys_device *dev) +arch_initcall(s3c2416_pm_init); + + +static void s3c2416_pm_resume(void) { /* unset the return-from-sleep amd inform flags */ __raw_writel(0x0, S3C2443_PWRMODE); __raw_writel(0x0, S3C2412_INFORM0); __raw_writel(0x0, S3C2412_INFORM1); - - return 0; } -static struct sysdev_driver s3c2416_pm_driver = { - .add = s3c2416_pm_add, - .suspend = s3c2416_pm_suspend, +struct syscore_ops s3c2416_pm_syscore_ops = { .resume = s3c2416_pm_resume, }; - -static __init int s3c2416_pm_init(void) -{ - return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver); -} - -arch_initcall(s3c2416_pm_init); diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index ba7fd87..494ce91 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -32,6 +32,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/clk.h> #include <linux/io.h> @@ -54,6 +55,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/sdhci.h> +#include <plat/pm.h> #include <plat/iic-core.h> #include <plat/fb-core.h> @@ -95,6 +97,9 @@ int __init s3c2416_init(void) s3c_fb_setname("s3c2443-fb"); + register_syscore_ops(&s3c2416_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + return sysdev_register(&s3c2416_sysdev); } diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 0db2411..7166620 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = { .num_resources = 0, }; +static struct platform_device gta02_dfbmcs320_device = { + .name = "dfbmcs320", +}; + static struct i2c_board_info gta02_i2c_devs[] __initdata = { { I2C_BOARD_INFO("pcf50633", 0x73), @@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = { &s3c_device_iis, &samsung_asoc_dma, &s3c_device_i2c0, + >a02_dfbmcs320_device, >a02_buttons_device, &s3c_device_adc, &s3c_device_ts, diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dfedc9c..dd3120d 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { * the same timings, however, anything smaller than 1024x768 * will only be displayed in the top left corner of a 1024x768 * XGA output unless you add optional dip switches to the shield. - * Therefore timings for other resolutions have been ommited here. + * Therefore timings for other resolutions have been omitted here. */ [2] = { _LCD_DECLARE( diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 14dc678..d885363 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/gpio.h> #include <linux/device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/serial_core.h> #include <linux/clk.h> #include <linux/i2c.h> @@ -284,7 +284,7 @@ static struct platform_device osiris_pcmcia = { #ifdef CONFIG_PM static unsigned char pm_osiris_ctrl0; -static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) +static int osiris_pm_suspend(void) { unsigned int tmp; @@ -304,7 +304,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) return 0; } -static int osiris_pm_resume(struct sys_device *sd) +static void osiris_pm_resume(void) { if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8) __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1); @@ -312,8 +312,6 @@ static int osiris_pm_resume(struct sys_device *sd) __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); - - return 0; } #else @@ -321,16 +319,11 @@ static int osiris_pm_resume(struct sys_device *sd) #define osiris_pm_resume NULL #endif -static struct sysdev_class osiris_pm_sysclass = { - .name = "mach-osiris", +static struct syscore_ops osiris_pm_syscore_ops = { .suspend = osiris_pm_suspend, .resume = osiris_pm_resume, }; -static struct sys_device osiris_pm_sysdev = { - .cls = &osiris_pm_sysclass, -}; - /* Link for DVS driver to TPS65011 */ static void osiris_tps_release(struct device *dev) @@ -439,8 +432,7 @@ static void __init osiris_map_io(void) static void __init osiris_init(void) { - sysdev_class_register(&osiris_pm_sysclass); - sysdev_register(&osiris_pm_sysdev); + register_syscore_ops(&osiris_pm_syscore_ops); s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&osiris_nand_info); diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index f7663f7..ce99ff7 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/gpio.h> #include <linux/clk.h> #include <linux/io.h> @@ -33,6 +34,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/s3c244x.h> +#include <plat/pm.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -51,6 +53,12 @@ int __init s3c2440_init(void) s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; + /* register suspend/resume handlers */ + + register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c244x_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + /* register our system device for everything else */ return sysdev_register(&s3c2440_sysdev); diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index ecf8135..6224bad 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -29,6 +29,7 @@ #include <linux/err.h> #include <linux/device.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/mutex.h> @@ -45,6 +46,7 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/s3c244x.h> +#include <plat/pm.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> @@ -167,6 +169,10 @@ int __init s3c2442_init(void) { printk("S3C2442: Initialising architecture\n"); + register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c244x_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); + return sysdev_register(&s3c2442_sysdev); } diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index de07c2f..c63e8f2 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -116,8 +116,6 @@ static int s3c244x_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2440_irq_driver = { .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, }; static int s3c2440_irq_init(void) @@ -129,8 +127,6 @@ arch_initcall(s3c2440_irq_init); static struct sysdev_driver s3c2442_irq_driver = { .add = s3c244x_irq_add, - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, }; diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 90c1707..7e8a23d 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -19,6 +19,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/clk.h> #include <linux/io.h> @@ -134,45 +135,14 @@ void __init s3c244x_init_clocks(int xtal) s3c2410_baseclk_add(); } -#ifdef CONFIG_PM - -static struct sleep_save s3c244x_sleep[] = { - SAVE_ITEM(S3C2440_DSC0), - SAVE_ITEM(S3C2440_DSC1), - SAVE_ITEM(S3C2440_GPJDAT), - SAVE_ITEM(S3C2440_GPJCON), - SAVE_ITEM(S3C2440_GPJUP) -}; - -static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -static int s3c244x_resume(struct sys_device *dev) -{ - s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); - return 0; -} - -#else -#define s3c244x_suspend NULL -#define s3c244x_resume NULL -#endif - /* Since the S3C2442 and S3C2440 share items, put both sysclasses here */ struct sysdev_class s3c2440_sysclass = { .name = "s3c2440-core", - .suspend = s3c244x_suspend, - .resume = s3c244x_resume }; struct sysdev_class s3c2442_sysclass = { .name = "s3c2442-core", - .suspend = s3c244x_suspend, - .resume = s3c244x_resume }; /* need to register class before we actually register the device, and @@ -194,3 +164,33 @@ static int __init s3c2442_core_init(void) } core_initcall(s3c2442_core_init); + + +#ifdef CONFIG_PM +static struct sleep_save s3c244x_sleep[] = { + SAVE_ITEM(S3C2440_DSC0), + SAVE_ITEM(S3C2440_DSC1), + SAVE_ITEM(S3C2440_GPJDAT), + SAVE_ITEM(S3C2440_GPJCON), + SAVE_ITEM(S3C2440_GPJUP) +}; + +static int s3c244x_suspend(void) +{ + s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + return 0; +} + +static void s3c244x_resume(void) +{ + s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); +} +#else +#define s3c244x_suspend NULL +#define s3c244x_resume NULL +#endif + +struct syscore_ops s3c244x_pm_syscore_ops = { + .suspend = s3c244x_suspend, + .resume = s3c244x_resume, +}; diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index c35585c..b197171 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) case S3C2410_DMAOP_FLUSH: return s3c64xx_dma_flush(chan); - /* belive PAUSE/RESUME are no-ops */ + /* believe PAUSE/RESUME are no-ops */ case S3C2410_DMAOP_PAUSE: case S3C2410_DMAOP_RESUME: case S3C2410_DMAOP_STARTED: diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index da1bec6..8bec61e 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -13,7 +13,7 @@ */ #include <linux/kernel.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/irq.h> @@ -54,7 +54,7 @@ static struct irq_grp_save { static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; -static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state) +static int s3c64xx_irq_pm_suspend(void) { struct irq_grp_save *grp = eint_grp_save; int i; @@ -75,7 +75,7 @@ static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int s3c64xx_irq_pm_resume(struct sys_device *dev) +static void s3c64xx_irq_pm_resume(void) { struct irq_grp_save *grp = eint_grp_save; int i; @@ -94,18 +94,18 @@ static int s3c64xx_irq_pm_resume(struct sys_device *dev) } S3C_PMDBG("%s: IRQ configuration restored\n", __func__); - return 0; } -static struct sysdev_driver s3c64xx_irq_driver = { +struct syscore_ops s3c64xx_irq_syscore_ops = { .suspend = s3c64xx_irq_pm_suspend, .resume = s3c64xx_irq_pm_resume, }; -static int __init s3c64xx_irq_pm_init(void) +static __init int s3c64xx_syscore_init(void) { - return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver); -} + register_syscore_ops(&s3c64xx_irq_syscore_ops); -arch_initcall(s3c64xx_irq_pm_init); + return 0; +} +core_initcall(s3c64xx_syscore_init); diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h index 4be4cc9..07aa4d6 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h @@ -29,7 +29,7 @@ #define WPALCON_H (0x19c) #define WPALCON_L (0x1a0) -/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but +/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but * different for WPAL2-4 */ /* In WPALCON_L (aka WPALCON) */ diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index f16946e..be25879 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 1f4b595..a5a1e33 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,7 +18,7 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ +/* Practically, GPIO banks up to MP03 are the configurable gpio banks */ /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 549d792..24febae 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> +#include <linux/syscore_ops.h> #include <linux/io.h> #include <plat/cpu.h> @@ -140,7 +141,17 @@ static int s5pv210_pm_add(struct sys_device *sysdev) return 0; } -static int s5pv210_pm_resume(struct sys_device *dev) +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); + +static void s5pv210_pm_resume(void) { u32 tmp; @@ -150,17 +161,15 @@ static int s5pv210_pm_resume(struct sys_device *dev) __raw_writel(tmp , S5P_OTHERS); s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); - - return 0; } -static struct sysdev_driver s5pv210_pm_driver = { - .add = s5pv210_pm_add, +static struct syscore_ops s5pv210_pm_syscore_ops = { .resume = s5pv210_pm_resume, }; -static __init int s5pv210_pm_drvinit(void) +static __init int s5pv210_pm_syscore_init(void) { - return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); + register_syscore_ops(&s5pv210_pm_syscore_ops); + return 0; } -arch_initcall(s5pv210_pm_drvinit); +arch_initcall(s5pv210_pm_syscore_init); diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 746777d..3e3ac05 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - /* GPG1[3:6] special-funtion 3 */ + /* GPG1[3:6] special-function 3 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: - /* GPG0[3:6] special-funtion 2 */ + /* GPG0[3:6] special-function 2 */ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index c32e202..a83b6c9 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, { u32 ctrl2, ctrl3; - /* don't need to alter anything acording to card-type */ + /* don't need to alter anything according to card-type */ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e697691..41252d2 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o # LEDs support obj-$(CONFIG_LEDS) += $(led-y) -# Miscelaneous functions +# Miscellaneous functions obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_SA1100_SSP) += ssp.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 07d4e8b..aaa8acf 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -68,7 +68,7 @@ * clock change in ROM and jump to that code from the kernel. The main * disadvantage is that the ROM has to be modified, which is not * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unecessary complicated. + * jumping to ROM makes clock switching unnecessary complicated. * * The idea behind this driver is that the memory configuration can be * changed while running from DRAM (even with interrupts turned on!) diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h index 4f7ea01..bae8296 100644 --- a/arch/arm/mach-sa1100/include/mach/SA-1100.h +++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h @@ -1794,7 +1794,7 @@ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DCSR_RUN 0x00000001 /* DMA RUNing */ +#define DCSR_RUN 0x00000001 /* DMA running */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 423ddb3..dfbf824 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/ioport.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <mach/hardware.h> #include <asm/mach/irq.h> @@ -234,7 +234,7 @@ static struct sa1100irq_state { unsigned int iccr; } sa1100irq_state; -static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state) +static int sa1100irq_suspend(void) { struct sa1100irq_state *st = &sa1100irq_state; @@ -264,7 +264,7 @@ static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int sa1100irq_resume(struct sys_device *dev) +static void sa1100irq_resume(void) { struct sa1100irq_state *st = &sa1100irq_state; @@ -277,24 +277,17 @@ static int sa1100irq_resume(struct sys_device *dev) ICMR = st->icmr; } - return 0; } -static struct sysdev_class sa1100irq_sysclass = { - .name = "sa11x0-irq", +static struct syscore_ops sa1100irq_syscore_ops = { .suspend = sa1100irq_suspend, .resume = sa1100irq_resume, }; -static struct sys_device sa1100irq_device = { - .id = 0, - .cls = &sa1100irq_sysclass, -}; - static int __init sa1100irq_init_devicefs(void) { - sysdev_class_register(&sa1100irq_sysclass); - return sysdev_register(&sa1100irq_device); + register_syscore_ops(&sa1100irq_syscore_ops); + return 0; } device_initcall(sa1100irq_init_devicefs); diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9d490c6..f50b00b 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte * - * we need to reverse all data we recieve from the mcu due to its physical location + * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 */ u8 inline jornada_ssp_reverse(u8 byte) @@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev) static int jornada_ssp_remove(struct platform_device *dev) { - /* Note that this doesnt actually remove the driver, since theres nothing to remove + /* Note that this doesn't actually remove the driver, since theres nothing to remove * It just makes sure everything is turned off */ GPSR = GPIO_GPIO25; ssp_exit(); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 783b66f..1e35fa9 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &ap4evb_camera, }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); - -static int __init fsi_init_pm_clock(void) +static void __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; @@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void) if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); pr_err("Cannot get FSI ICK: %d\n", ret); - return ret; + return; } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); @@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void) pr_err("Cannot set FSI-A parent: %d\n", ret); clk_put(fsia_ick); - - return ret; } -device_initcall(fsi_init_pm_clock); /* * FIXME !! @@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void) __raw_writel(srcr4 & ~(1 << 13), SRCR4); platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); + + hdmi_init_pm_clock(); + fsi_init_pm_clock(); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 8184d4d..7da2ca2 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = { .name = "sh_fsi2_b_hdmi", }; -static int __init hdmi_init_pm_clock(void) +static void __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); int ret; @@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) { + if (ret < 0) pr_err("Cannot set HDMI parent: %d\n", ret); - goto out; - } out: if (!IS_ERR(hdmi_ick)) clk_put(hdmi_ick); - return ret; } -device_initcall(hdmi_init_pm_clock); /* USB1 (Host) */ static void usb1_host_port_power(int port, int power) @@ -1218,6 +1214,8 @@ static void __init mackerel_init(void) sh7372_add_standard_devices(); platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + + hdmi_init_pm_clock(); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h index e11560a..21a59db 100644 --- a/arch/arm/mach-shmobile/include/mach/mmc.h +++ b/arch/arm/mach-shmobile/include/mach/mmc.h @@ -9,7 +9,7 @@ #ifdef CONFIG_MACH_AP4EVB #include "mach/mmc-ap4eb.h" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #include "mach/mmc-mackerel.h" #else #error "unsupported board." diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index 6d6a205..9320aff 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -13,7 +13,7 @@ #ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB #include "mach/head-ap4evb.txt" -#elif CONFIG_MACH_MACKEREL +#elif defined(CONFIG_MACH_MACKEREL) #define MACH_TYPE MACH_TYPE_MACKEREL #include "mach/head-mackerel.txt" #else diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c index 94912d3..2d1b67a 100644 --- a/arch/arm/mach-shmobile/pm_runtime.c +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -18,152 +18,41 @@ #include <linux/clk.h> #include <linux/sh_clk.h> #include <linux/bitmap.h> +#include <linux/slab.h> #ifdef CONFIG_PM_RUNTIME -#define BIT_ONCE 0 -#define BIT_ACTIVE 1 -#define BIT_CLK_ENABLED 2 -struct pm_runtime_data { - unsigned long flags; - struct clk *clk; -}; - -static void __devres_release(struct device *dev, void *res) -{ - struct pm_runtime_data *prd = res; - - dev_dbg(dev, "__devres_release()\n"); - - if (test_bit(BIT_CLK_ENABLED, &prd->flags)) - clk_disable(prd->clk); - - if (test_bit(BIT_ACTIVE, &prd->flags)) - clk_put(prd->clk); -} - -static struct pm_runtime_data *__to_prd(struct device *dev) -{ - return devres_find(dev, __devres_release, NULL, NULL); -} - -static void platform_pm_runtime_init(struct device *dev, - struct pm_runtime_data *prd) -{ - if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) { - prd->clk = clk_get(dev, NULL); - if (!IS_ERR(prd->clk)) { - set_bit(BIT_ACTIVE, &prd->flags); - dev_info(dev, "clocks managed by runtime pm\n"); - } - } -} - -static void platform_pm_runtime_bug(struct device *dev, - struct pm_runtime_data *prd) -{ - if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) - dev_err(dev, "runtime pm suspend before resume\n"); -} - -int platform_pm_runtime_suspend(struct device *dev) -{ - struct pm_runtime_data *prd = __to_prd(dev); - - dev_dbg(dev, "platform_pm_runtime_suspend()\n"); - - platform_pm_runtime_bug(dev, prd); - - if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { - clk_disable(prd->clk); - clear_bit(BIT_CLK_ENABLED, &prd->flags); - } - - return 0; -} - -int platform_pm_runtime_resume(struct device *dev) -{ - struct pm_runtime_data *prd = __to_prd(dev); - - dev_dbg(dev, "platform_pm_runtime_resume()\n"); - - platform_pm_runtime_init(dev, prd); - - if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { - clk_enable(prd->clk); - set_bit(BIT_CLK_ENABLED, &prd->flags); - } - - return 0; -} - -int platform_pm_runtime_idle(struct device *dev) +static int default_platform_runtime_idle(struct device *dev) { /* suspend synchronously to disable clocks immediately */ return pm_runtime_suspend(dev); } -static int platform_bus_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - struct pm_runtime_data *prd; - - dev_dbg(dev, "platform_bus_notify() %ld !\n", action); - - if (action == BUS_NOTIFY_BIND_DRIVER) { - prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL); - if (prd) - devres_add(dev, prd); - else - dev_err(dev, "unable to alloc memory for runtime pm\n"); - } - - return 0; -} - -#else /* CONFIG_PM_RUNTIME */ - -static int platform_bus_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - struct clk *clk; +static struct dev_power_domain default_power_domain = { + .ops = { + .runtime_suspend = pm_runtime_clk_suspend, + .runtime_resume = pm_runtime_clk_resume, + .runtime_idle = default_platform_runtime_idle, + USE_PLATFORM_PM_SLEEP_OPS + }, +}; - dev_dbg(dev, "platform_bus_notify() %ld !\n", action); +#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain) - switch (action) { - case BUS_NOTIFY_BIND_DRIVER: - clk = clk_get(dev, NULL); - if (!IS_ERR(clk)) { - clk_enable(clk); - clk_put(clk); - dev_info(dev, "runtime pm disabled, clock forced on\n"); - } - break; - case BUS_NOTIFY_UNBOUND_DRIVER: - clk = clk_get(dev, NULL); - if (!IS_ERR(clk)) { - clk_disable(clk); - clk_put(clk); - dev_info(dev, "runtime pm disabled, clock forced off\n"); - } - break; - } +#else - return 0; -} +#define DEFAULT_PWR_DOMAIN_PTR NULL #endif /* CONFIG_PM_RUNTIME */ -static struct notifier_block platform_bus_notifier = { - .notifier_call = platform_bus_notify +static struct pm_clk_notifier_block platform_bus_notifier = { + .pwr_domain = DEFAULT_PWR_DOMAIN_PTR, + .con_ids = { NULL, }, }; static int __init sh_pm_runtime_init(void) { - bus_register_notifier(&platform_bus_type, &platform_bus_notifier); + pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; } core_initcall(sh_pm_runtime_init); diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index e945ae2..f4ef5eb 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Change the source selector to invalid to stop the DMA from * FIFO to memory. * - Read the status register to know the number of pending - * bytes to be transfered. + * bytes to be transferred. * - Finally stop or program the DMA to the next buffer in the * list. */ @@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, if (status & STA_BUSY) req->bytes_transferred -= to_transfer; - /* In continous transfer mode, DMA only tracks the count of the + /* In continuous transfer mode, DMA only tracks the count of the * half DMA buffer. So, if the DMA already finished half the DMA * then add the half buffer to the completed count. * diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index 76a3f65..65a1aba 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -257,7 +257,8 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) void tegra_gpio_resume(void) { unsigned long flags; - int b, p, i; + int b; + int p; local_irq_save(flags); @@ -280,7 +281,8 @@ void tegra_gpio_resume(void) void tegra_gpio_suspend(void) { unsigned long flags; - int b, p, i; + int b; + int p; local_irq_save(flags); for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h index cc11517..425b42e 100644 --- a/arch/arm/mach-tegra/include/mach/barriers.h +++ b/arch/arm/mach-tegra/include/mach/barriers.h @@ -23,7 +23,7 @@ #include <asm/outercache.h> -#define rmb() dmb() +#define rmb() dsb() #define wmb() do { dsb(); outer_sync(); } while (0) #define mb() wmb() diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 39011bd..d0132e8 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -92,11 +92,11 @@ struct tegra_dma_req { /* This is a called from the DMA ISR context when the DMA is still in * progress and is actively filling same buffer. * - * In case of continous mode receive, this threshold is 1/2 the buffer + * In case of continuous mode receive, this threshold is 1/2 the buffer * size. In other cases, this will not even be called as there is no * hardware support for it. * - * In the case of continous mode receive, if there is next req already + * In the case of continuous mode receive, if there is next req already * queued, DMA programs the HW to use that req when this req is * completed. If there is no "next req" queued, then DMA ISR doesn't do * anything before calling this callback. diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 6d7c4ee..4459470 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1362,14 +1362,15 @@ static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate) { unsigned long flags; int ret; + long new_rate = rate; - rate = clk_round_rate(c->parent, rate); - if (rate < 0) - return rate; + new_rate = clk_round_rate(c->parent, new_rate); + if (new_rate < 0) + return new_rate; spin_lock_irqsave(&c->parent->spinlock, flags); - c->u.shared_bus_user.rate = rate; + c->u.shared_bus_user.rate = new_rate; ret = tegra_clk_shared_bus_update(c->parent); spin_unlock_irqrestore(&c->parent->spinlock, flags); diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index fabcc49..5535dd0 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void) val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR); val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); - /* Deactivate VCXO if noone else is using VCXO */ + /* Deactivate VCXO if no one else is using VCXO */ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO)) val &= ~U300_SYSCON_CCR_TURN_VCXO_ON; writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR); @@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate) */ long clk_round_rate(struct clk *clk, unsigned long rate) { - /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */ + /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */ /* Else default to fixed value */ if (clk->round_rate) { diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index dc8746d..6e1907fa 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { * on value present in GpioSel1 to GpioSel6 and AlternatFunction * register. This is the array of 7 configuration settings. * One has to compile time decide these settings. Below is the - * explaination of these setting + * explanation of these setting * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO @@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = { .irq = NOMADIK_GPIO_TO_IRQ(217), .platform_data = &mop500_tc35892_data, }, -}; - -/* I2C0 devices only available prior to HREFv60 */ -static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + /* I2C0 devices only available prior to HREFv60 */ { I2C_BOARD_INFO("tps61052", 0x33), .platform_data = &mop500_tps61052_data, }, }; +#define NUM_PRE_V60_I2C0_DEVICES 1 + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -425,6 +424,8 @@ static void __init mop500_uart_init(void) static void __init mop500_init_machine(void) { + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller @@ -448,11 +449,11 @@ static void __init mop500_init_machine(void) platform_device_register(&ab8500_device); - i2c_register_board_info(0, mop500_i2c0_devices, - ARRAY_SIZE(mop500_i2c0_devices)); - if (!machine_is_hrefv60()) - i2c_register_board_info(0, mop500_i2c0_old_devices, - ARRAY_SIZE(mop500_i2c0_old_devices)); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + if (machine_is_hrefv60()) + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 0fefb34..16647b2 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -58,7 +58,7 @@ #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) -/* per7 base addressess */ +/* per7 base addresses */ #define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) #define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) #define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) @@ -68,7 +68,7 @@ #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -/* per6 base addressess */ +/* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) @@ -79,11 +79,11 @@ #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) -/* per5 base addressess */ +/* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) -/* per4 base addressess */ +/* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) @@ -106,7 +106,7 @@ #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) -/* per2 base addressess */ +/* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index d3644db..f40c696 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -32,7 +32,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * Size Clean (ticks) Dirty (ticks) * 4096 21 20 21 53 55 54 diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 49c2b66..a7b276d 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -34,7 +34,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. * * *** This needs benchmarking */ diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 6136e68..dc18d81 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all) * Flush the entire cache system. * The data cache flush is now achieved using atomic clean / invalidates * working outwards from L1 cache. This is done using Set/Way based cache - * maintainance instructions. + * maintenance instructions. * The instruction cache can still be invalidated back to the point of * unification in a single instruction. * diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e5f6fc4..e591513 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) * Convert start_pfn/end_pfn to a struct page pointer. */ start_pg = pfn_to_page(start_pfn - 1) + 1; - end_pg = pfn_to_page(end_pfn); + end_pg = pfn_to_page(end_pfn - 1) + 1; /* * Convert to physical addresses, and @@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi) bank_start = bank_pfn_start(bank); +#ifdef CONFIG_SPARSEMEM + /* + * Take care not to free memmap entries that don't exist + * due to SPARSEMEM sections which aren't present. + */ + bank_start = min(bank_start, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. @@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi) */ prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES); } + +#ifdef CONFIG_SPARSEMEM + if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION)) + free_memmap(prev_bank_end, + ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#endif } static void __init free_highpages(void) diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index afe209e..74be05f 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -7,6 +7,7 @@ #include <linux/shm.h> #include <linux/sched.h> #include <linux/io.h> +#include <linux/personality.h> #include <linux/random.h> #include <asm/cputype.h> #include <asm/system.h> @@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, mm->cached_hole_size = 0; } /* 8 bits of randomness in 20 address space bits */ - if (current->flags & PF_RANDOMIZE) + if ((current->flags & PF_RANDOMIZE) && + !(current->personality & ADDR_NO_RANDOMIZE)) addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT; full_search: diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 226e3d8..6c4e7fd 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 86d9c2c..4ce947c 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -64,7 +64,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 83d3dd3..c8884c5 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 686043e..4136846 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 32768 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 665266d..7a06e59 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin) /* * Function: arm720_proc_do_idle(void) * Params : r0 = unused - * Purpose : put the processer in proper idle mode + * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 219980e..bf8a1d1 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -53,7 +53,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 65536 @@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size .equ cpu_arm920_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 36154b1..95ba1fc 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -54,7 +54,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. (I think this should + * cache line maintenance instructions. (I think this should * be 32768). */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 89c5e000..541e477 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -77,7 +77,7 @@ /* * This is the size at which it becomes more efficient to * clean the whole cache, rather than using the individual - * cache line maintainence instructions. + * cache line maintenance instructions. */ #define CACHE_DLIMIT 8192 diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 6a4bdb2..0ed85d9 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size .equ cpu_arm926_suspend_size, 4 * 3 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c13, c0, 0 @ PID diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index e32fa49..34261f9 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -85,7 +85,7 @@ /* * Sanity check the PTE configuration for the code below - which makes - * certain assumptions about how these bits are layed out. + * certain assumptions about how these bits are laid out. */ #ifdef CONFIG_MMU #if L_PTE_SHARED != PTE_EXT_SHARED diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 74483d1..184a9c9 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext) .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4*4 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_sa1100_do_suspend) stmfd sp!, {r4 - r7, lr} mrc p15, 0, r4, c3, c0, 0 @ domain ID diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 832b6bd..7c99cb4 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext) /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size .equ cpu_v6_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v6_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID @@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend) mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ co-processor access control mrc p15, 0, r11, c1, c0, 0 @ control register stmia r0, {r4 - r11} @@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume) mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 - mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register mcr p15, 0, r10, c1, c0, 2 @ co-processor access control mcr p15, 0, ip, c2, c0, 2 @ TTB control register mcr p15, 0, ip, c7, c5, 4 @ ISB diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 262fa88..babfba0 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -211,7 +211,7 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID @@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 63d8b20..5962136 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .globl cpu_xsc3_suspend_size .equ cpu_xsc3_suspend_size, 4 * 8 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 086038c..42af976 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area) teq r2, #DMA_TO_DEVICE beq xscale_dma_clean_range b xscale_dma_flush_range -ENDPROC(xscsale_dma_a0_map_area) +ENDPROC(xscale_dma_a0_map_area) /* * dma_unmap_area(start, size, dir) @@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext) .globl cpu_xscale_suspend_size .equ cpu_xscale_suspend_size, 4 * 7 -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP ENTRY(cpu_xscale_do_suspend) stmfd sp!, {r4 - r10, lr} mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index ce81481..4268a2b 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -13,7 +13,7 @@ /* * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controling CPU frequency. It allows you to change + * The CPUFREQ driver is for controlling CPU frequency. It allows you to change * the CPU clock speed on the fly. */ diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 7a10724..6cd6d7f 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip, return 0; } +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) { int i, j; @@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) __raw_writel(~0, port[i].base + GPIO_ISR); for (j = port[i].virtual_irq_start; j < port[i].virtual_irq_start + 32; j++) { + irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_and_handler(j, &gpio_irq_chip, handle_level_irq); set_irq_flags(j, IRQF_VALID); diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index bd9bb97..2e49e71 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -33,9 +33,9 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - @ this macro checks which interrupt occured + @ this macro checks which interrupt occurred @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat + @ and returns if an interrupt occurred in irqstat .macro get_irqnr_and_base, irqnr, irqstat, base, tmp #ifndef CONFIG_MXC_TZIC @ Load offset & priority of the highest priority diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 04c0d06..6bb96ef 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -24,7 +24,7 @@ struct mxc_nand_platform_data { unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if supress hardware ECC */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ struct mtd_partition *parts; /* partition table */ int nr_parts; /* size of parts */ diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S index 4ddce56..8397a2d 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/plat-mxc/ssi-fiq.S @@ -124,6 +124,8 @@ imx_ssi_fiq_start: 1: @ return from FIQ subs pc, lr, #4 + + .align imx_ssi_fiq_base: .word 0x0 imx_ssi_fiq_rx_buffer: diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 7d9f815..ea28f98 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base); * Claiming GPIOs, and setting their direction and initial values, is the * responsibility of the device drivers. So is responding to probe(). * - * Board-specific knowlege like creating devices or pin setup is to be + * Board-specific knowledge like creating devices or pin setup is to be * kept out of drivers as much as possible. In particular, pin setup * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ec3b5d..c22217c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting + * is a chance for CSSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_src_pos(int lch) @@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos); * If the channel is running the caller must disable interrupts prior calling * this function and process the returned value before re-enabling interrupt to * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting + * is a chance for CDSA_L register overflow between the two reads resulting * in incorrect return value. */ dma_addr_t omap_get_dma_dst_pos(int lch) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d2adcdd..bd9e321 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -17,7 +17,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> @@ -1372,9 +1372,7 @@ static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { .resume_noirq = omap_mpuio_resume_noirq, }; -/* use platform_driver for this, now that there's no longer any - * point to sys_device (other than not disturbing old code). - */ +/* use platform_driver for this. */ static struct platform_driver omap_mpuio_driver = { .driver = { .name = "mpuio", @@ -1745,7 +1743,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) } #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +static int omap_gpio_suspend(void) { int i; @@ -1795,12 +1793,12 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) return 0; } -static int omap_gpio_resume(struct sys_device *dev) +static void omap_gpio_resume(void) { int i; if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; + return; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; @@ -1836,21 +1834,13 @@ static int omap_gpio_resume(struct sys_device *dev) __raw_writel(bank->saved_wakeup, wake_set); spin_unlock_irqrestore(&bank->lock, flags); } - - return 0; } -static struct sysdev_class omap_gpio_sysclass = { - .name = "gpio", +static struct syscore_ops omap_gpio_syscore_ops = { .suspend = omap_gpio_suspend, .resume = omap_gpio_resume, }; -static struct sys_device omap_gpio_device = { - .id = 0, - .cls = &omap_gpio_sysclass, -}; - #endif #ifdef CONFIG_ARCH_OMAP2PLUS @@ -2108,21 +2098,14 @@ postcore_initcall(omap_gpio_drv_reg); static int __init omap_gpio_sysinit(void) { - int ret = 0; - mpuio_init(); #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - if (ret == 0) { - ret = sysdev_class_register(&omap_gpio_sysclass); - if (ret == 0) - ret = sysdev_register(&omap_gpio_device); - } - } + if (cpu_is_omap16xx() || cpu_class_is_omap2()) + register_syscore_ops(&omap_gpio_syscore_ops); #endif - return ret; + return 0; } arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index d6f9fa0..cac2e8a 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void); /* Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. * * - * The original OMAP-specfic calls should eventually be removed. + * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 12b3161..1527929 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,7 +90,7 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at begining of spare area as romcode */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 8a51fd5..34fc31e 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) clk_enable(obj->clk); errs = iommu_report_fault(obj, &da); clk_disable(obj->clk); + if (errs == 0) + return IRQ_HANDLED; /* Fault callback or TLB/PTE Dynamic loading */ if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d598d9f..5587acf 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf) /* resend */ return -1; } else { - /* wait for recieve confirmation */ + /* wait for receive confirmation */ int attemps = 0; while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 9bbda9a..a37b8eb 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -536,6 +536,28 @@ int omap_early_device_register(struct omap_device *od) return 0; } +static int _od_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return omap_device_idle(pdev); +} + +static int _od_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return omap_device_enable(pdev); +} + +static struct dev_power_domain omap_device_power_domain = { + .ops = { + .runtime_suspend = _od_runtime_suspend, + .runtime_resume = _od_runtime_resume, + USE_PLATFORM_PM_SLEEP_OPS + } +}; + /** * omap_device_register - register an omap_device with one omap_hwmod * @od: struct omap_device * to register @@ -549,6 +571,7 @@ int omap_device_register(struct omap_device *od) pr_debug("omap_device: %s: registering\n", od->pdev.name); od->pdev.dev.parent = &omap_device_parent; + od->pdev.dev.pwr_domain = &omap_device_power_domain; return platform_device_register(&od->pdev); } diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index dce088f..48ebb94 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/slab.h> #include <mach/gpio.h> @@ -295,7 +295,7 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) } #ifdef CONFIG_PM -static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) +static int pxa_gpio_suspend(void) { struct pxa_gpio_chip *c; int gpio; @@ -312,7 +312,7 @@ static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int pxa_gpio_resume(struct sys_device *dev) +static void pxa_gpio_resume(void) { struct pxa_gpio_chip *c; int gpio; @@ -326,22 +326,13 @@ static int pxa_gpio_resume(struct sys_device *dev) __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET); __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET); } - return 0; } #else #define pxa_gpio_suspend NULL #define pxa_gpio_resume NULL #endif -struct sysdev_class pxa_gpio_sysclass = { - .name = "gpio", +struct syscore_ops pxa_gpio_syscore_ops = { .suspend = pxa_gpio_suspend, .resume = pxa_gpio_resume, }; - -static int __init pxa_gpio_init(void) -{ - return sysdev_class_register(&pxa_gpio_sysclass); -} - -core_initcall(pxa_gpio_init); diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 75f6564..89e68e0 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t; * * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which * represents a range of MFP pins from "start" to "end", with the offset - * begining at "offset", to define a single pin, let "end" = -1. + * beginning at "offset", to define a single pin, let "end" = -1. * * use * diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index a9aa5ad..be12ead 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/sysdev.h> #include <plat/mfp.h> diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2064c3..0291bd6 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o -# Architecture dependant builds +# Architecture dependent builds obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index eea75ff..b3d3d02 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) /* whilst we will be called later on, we try and re-set the * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediatley having to re-set + * up resuming devices and then immediately having to re-set * a number of settings once these devices have restarted. * * as a note, it is expected devices are not used until they diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6ad274e..c10d10c 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -22,7 +22,7 @@ #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/slab.h> #include <linux/errno.h> #include <linux/io.h> @@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) break; case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I belive in this case we do not have anything to do + /* I believe in this case we do not have anything to do * until the next buffer comes along, and we turn off the * reload */ return; @@ -1195,19 +1195,12 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) -{ - return container_of(dev, struct s3c2410_dma_chan, dev); -} - -/* system device class */ +/* system core operations */ #ifdef CONFIG_PM -static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) +static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp) { - struct s3c2410_dma_chan *cp = to_dma_chan(dev); - printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { @@ -1222,13 +1215,21 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) s3c2410_dma_dostop(cp); } +} + +static int s3c2410_dma_suspend(void) +{ + struct s3c2410_dma_chan *cp = s3c2410_chans; + int channel; + + for (channel = 0; channel < dma_channels; cp++, channel++) + s3c2410_dma_suspend_chan(cp); return 0; } -static int s3c2410_dma_resume(struct sys_device *dev) +static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) { - struct s3c2410_dma_chan *cp = to_dma_chan(dev); unsigned int no = cp->number | DMACH_LOW_LEVEL; /* restore channel's hardware configuration */ @@ -1249,13 +1250,21 @@ static int s3c2410_dma_resume(struct sys_device *dev) return 0; } +static void s3c2410_dma_resume(void) +{ + struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; + int channel; + + for (channel = dma_channels - 1; channel >= 0; cp++, channel--) + s3c2410_dma_resume_chan(cp); +} + #else #define s3c2410_dma_suspend NULL #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -struct sysdev_class dma_sysclass = { - .name = "s3c24xx-dma", +struct syscore_ops dma_syscore_ops = { .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, }; @@ -1269,39 +1278,14 @@ static void s3c2410_dma_cache_ctor(void *p) /* initialisation code */ -static int __init s3c24xx_dma_sysclass_init(void) +static int __init s3c24xx_dma_syscore_init(void) { - int ret = sysdev_class_register(&dma_sysclass); - - if (ret != 0) - printk(KERN_ERR "dma sysclass registration failed\n"); - - return ret; -} - -core_initcall(s3c24xx_dma_sysclass_init); - -static int __init s3c24xx_dma_sysdev_register(void) -{ - struct s3c2410_dma_chan *cp = s3c2410_chans; - int channel, ret; - - for (channel = 0; channel < dma_channels; cp++, channel++) { - cp->dev.cls = &dma_sysclass; - cp->dev.id = channel; - ret = sysdev_register(&cp->dev); - - if (ret) { - printk(KERN_ERR "error registering dev for dma %d\n", - channel); - return ret; - } - } + register_syscore_ops(&dma_syscore_ops); return 0; } -late_initcall(s3c24xx_dma_sysdev_register); +late_initcall(s3c24xx_dma_syscore_init); int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, unsigned int stride) diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c index c3624d8..0efb2e2 100644 --- a/arch/arm/plat-s3c24xx/irq-pm.c +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> #include <linux/irq.h> #include <plat/cpu.h> @@ -65,7 +64,7 @@ static unsigned long save_extint[3]; static unsigned long save_eintflt[4]; static unsigned long save_eintmask; -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +int s3c24xx_irq_suspend(void) { unsigned int i; @@ -81,7 +80,7 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) return 0; } -int s3c24xx_irq_resume(struct sys_device *dev) +void s3c24xx_irq_resume(void) { unsigned int i; @@ -93,6 +92,4 @@ int s3c24xx_irq_resume(struct sys_device *dev) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; } diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 46dd078..cd6d67c 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) } /* - * chained GPIO irq has been sucessfully registered, allocate new gpio + * chained GPIO irq has been successfully registered, allocate new gpio * int group and assign irq nubmers */ diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c index 5259ad4..327acb3 100644 --- a/arch/arm/plat-s5p/irq-pm.c +++ b/arch/arm/plat-s5p/irq-pm.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> #include <plat/cpu.h> #include <plat/irqs.h> @@ -77,17 +76,15 @@ static struct sleep_save eint_save[] = { SAVE_ITEM(S5P_EINT_MASK(3)), }; -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +int s3c24xx_irq_suspend(void) { s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); return 0; } -int s3c24xx_irq_resume(struct sys_device *dev) +void s3c24xx_irq_resume(void) { s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); - - return 0; } diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c index d592b63..d15dc47 100644 --- a/arch/arm/plat-s5p/pm.c +++ b/arch/arm/plat-s5p/pm.c @@ -19,17 +19,6 @@ #define PFX "s5p pm: " -/* s3c_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - /* nothing here yet */ -} - /* s3c_pm_configure_extint * * configure all external interrupt pins diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 9a82b88..983c578 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -21,7 +21,7 @@ struct clk; * @set_parent: set the clock's parent, see clk_set_parent(). * * Group the common clock implementations together so that we - * don't have to keep setting the same fiels again. We leave + * don't have to keep setting the same fields again. We leave * enable in struct clk. * * Adding an extra layer of indirection into the process should diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index cedfff5..3aedac0 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -68,6 +68,12 @@ extern void s3c24xx_init_uartdevs(char *name, struct sys_timer; extern struct sys_timer s3c24xx_timer; +extern struct syscore_ops s3c2410_pm_syscore_ops; +extern struct syscore_ops s3c2412_pm_syscore_ops; +extern struct syscore_ops s3c2416_pm_syscore_ops; +extern struct syscore_ops s3c244x_pm_syscore_ops; +extern struct syscore_ops s3c64xx_irq_syscore_ops; + /* system device classes */ extern struct sysdev_class s3c2410_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 5603db0..3ad8386 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of functions for diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 5e04fa6..1762dcb 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ #define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) @@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. @@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index dac35d0..8cad4cf 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * of control per GPIO, generally in the form of: * 0000 = Input * 0001 = Output - * others = Special functions (dependant on bank) + * others = Special functions (dependent on bank) * * Note, since the code to deal with the case where there are two control * registers instead of one, we do not have a separate set of function diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 937cc2a..7fb6f6b 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -103,14 +103,16 @@ extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); #ifdef CONFIG_PM extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); +extern int s3c24xx_irq_suspend(void); +extern void s3c24xx_irq_resume(void); #else #define s3c_irqext_wake NULL #define s3c24xx_irq_suspend NULL #define s3c24xx_irq_resume NULL #endif +extern struct syscore_ops s3c24xx_irq_syscore_ops; + /* PM debug functions */ #ifdef CONFIG_SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index b0bdf16..058e096 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -57,7 +57,7 @@ enum clk_types { * @cfg_gpio: Configure the GPIO for a specific card bit-width * @cfg_card: Configure the interface for a specific card and speed. This * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependant on + * changing of driver-strength and other controls dependent on * the card and speed of operation. * * Initialisation data specific to either the machine or the platform @@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata; extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata; -/* Helper function availablity */ +/* Helper function availability */ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index e4baf76..6b733fa 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz) */ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) { - void *save_at = phys_to_virt(s3c_sleep_save_phys); unsigned long addr; unsigned long left; void *stkpage; @@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) goto skip_check; } - if (in_region(ptr, left, save_at, 32*4 )) { - S3C_PMDBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - /* calculate and check the checksum */ calc = crc32_le(~0, ptr, left); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index d5b58d3..5c0a440 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) * * print any IRQs asserted at resume time (ie, we woke from) */ -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) +static void __maybe_unused s3c_pm_show_resume_irqs(int start, + unsigned long which, + unsigned long mask) { int i; diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index b4ff8d7..f85638c 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -68,7 +68,7 @@ struct s3c_pl330_xfer { * @req: Two requests to communicate with the PL330 engine. * @callback_fn: Callback function to the client. * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next excecuted. + * @xfer_head: Pointer to the xfer to be next executed. * @dmac: Pointer to the DMAC that manages this channel, NULL if the * channel is available to be acquired. * @client: Client of this channel. NULL if the diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 2ae6606..fcc0d0a 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -89,7 +89,7 @@ struct rate_config { * @sibling: node for list of clocks having same parents * @private_data: clock specific private data * @node: list to maintain clocks linearly - * @cl: clocklook up assoicated with this clock + * @cl: clocklook up associated with this clock * @dent: object for debugfs */ struct clk { diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index bbf3da0..f25e7ec 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread) put_cpu(); } +static void vfp_thread_copy(struct thread_info *thread) +{ + struct thread_info *parent = current_thread_info(); + + vfp_sync_hwstate(parent); + thread->vfpstate = parent->vfpstate; +} + /* * When this function is called with the following 'cmd's, the following * is true while this function is being run: @@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread) static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; + u32 fpexc; +#ifdef CONFIG_SMP + unsigned int cpu; +#endif - if (likely(cmd == THREAD_NOTIFY_SWITCH)) { - u32 fpexc = fmrx(FPEXC); + switch (cmd) { + case THREAD_NOTIFY_SWITCH: + fpexc = fmrx(FPEXC); #ifdef CONFIG_SMP - unsigned int cpu = thread->cpu; + cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in @@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * old state. */ fmxr(FPEXC, fpexc & ~FPEXC_EN); - return NOTIFY_DONE; - } + break; - if (cmd == THREAD_NOTIFY_FLUSH) + case THREAD_NOTIFY_FLUSH: vfp_thread_flush(thread); - else + break; + + case THREAD_NOTIFY_EXIT: vfp_thread_exit(thread); + break; + + case THREAD_NOTIFY_COPY: + vfp_thread_copy(thread); + break; + } return NOTIFY_DONE; } @@ -378,9 +398,9 @@ static void vfp_enable(void *unused) } #ifdef CONFIG_PM -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> -static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state) +static int vfp_pm_suspend(void) { struct thread_info *ti = current_thread_info(); u32 fpexc = fmrx(FPEXC); @@ -400,34 +420,25 @@ static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int vfp_pm_resume(struct sys_device *dev) +static void vfp_pm_resume(void) { /* ensure we have access to the vfp */ vfp_enable(NULL); /* and disable it to ensure the next usage restores the state */ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); - - return 0; } -static struct sysdev_class vfp_pm_sysclass = { - .name = "vfp", +static struct syscore_ops vfp_pm_syscore_ops = { .suspend = vfp_pm_suspend, .resume = vfp_pm_resume, }; -static struct sys_device vfp_pm_sysdev = { - .cls = &vfp_pm_sysclass, -}; - static void vfp_pm_init(void) { - sysdev_class_register(&vfp_pm_sysclass); - sysdev_register(&vfp_pm_sysdev); + register_syscore_ops(&vfp_pm_syscore_ops); } - #else static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h index ff5b7cf..160543d 100644 --- a/arch/avr32/include/asm/setup.h +++ b/arch/avr32/include/asm/setup.h @@ -94,6 +94,13 @@ struct tag_ethernet { #define ETH_INVALID_PHY 0xff +/* board information */ +#define ATAG_BOARDINFO 0x54410008 + +struct tag_boardinfo { + u32 board_number; +}; + struct tag { struct tag_header hdr; union { @@ -102,6 +109,7 @@ struct tag { struct tag_cmdline cmdline; struct tag_clock clock; struct tag_ethernet ethernet; + struct tag_boardinfo boardinfo; } u; }; @@ -128,6 +136,7 @@ extern struct tag *bootloader_tags; extern resource_size_t fbmem_start; extern resource_size_t fbmem_size; +extern u32 board_number; void setup_processor(void); diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index 5c70839..bb0974c 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -391,6 +391,21 @@ static int __init parse_tag_clock(struct tag *tag) __tagtable(ATAG_CLOCK, parse_tag_clock); /* + * The board_number correspond to the bd->bi_board_number in U-Boot. This + * parameter is only available during initialisation and can be used in some + * kind of board identification. + */ +u32 __initdata board_number; + +static int __init parse_tag_boardinfo(struct tag *tag) +{ + board_number = tag->u.boardinfo.board_number; + + return 0; +} +__tagtable(ATAG_BOARDINFO, parse_tag_boardinfo); + +/* * Scan the tag table for this tag, and call its parse function. The * tag table is built by the linker from all the __tagtable * declarations. diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index b91b204..7aa2575 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -95,28 +95,6 @@ void _exception(long signr, struct pt_regs *regs, int code, info.si_code = code; info.si_addr = (void __user *)addr; force_sig_info(signr, &info, current); - - /* - * Init gets no signals that it doesn't have a handler for. - * That's all very well, but if it has caused a synchronous - * exception and we ignore the resulting signal, it will just - * generate the same exception over and over again and we get - * nowhere. Better to kill it and let the kernel panic. - */ - if (is_global_init(current)) { - __sighandler_t handler; - - spin_lock_irq(¤t->sighand->siglock); - handler = current->sighand->action[signr-1].sa.sa_handler; - spin_unlock_irq(¤t->sighand->siglock); - if (handler == SIG_DFL) { - /* init has generated a synchronous exception - and it doesn't have a handler for the signal */ - printk(KERN_CRIT "init has generated signal %ld " - "but has no handler for it\n", signr); - do_exit(signr); - } - } } asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 442f08c..86925fd 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -35,22 +35,30 @@ void at32_clk_register(struct clk *clk) spin_unlock(&clk_list_lock); } -struct clk *clk_get(struct device *dev, const char *id) +static struct clk *__clk_get(struct device *dev, const char *id) { struct clk *clk; - spin_lock(&clk_list_lock); - list_for_each_entry(clk, &at32_clock_list, list) { if (clk->dev == dev && strcmp(id, clk->name) == 0) { - spin_unlock(&clk_list_lock); return clk; } } - spin_unlock(&clk_list_lock); return ERR_PTR(-ENOENT); } + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *clk; + + spin_lock(&clk_list_lock); + clk = __clk_get(dev, id); + spin_unlock(&clk_list_lock); + + return clk; +} + EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) @@ -257,15 +265,15 @@ static int clk_show(struct seq_file *s, void *unused) spin_lock(&clk_list_lock); /* show clock tree as derived from the three oscillators */ - clk = clk_get(NULL, "osc32k"); + clk = __clk_get(NULL, "osc32k"); dump_clock(clk, &r); clk_put(clk); - clk = clk_get(NULL, "osc0"); + clk = __clk_get(NULL, "osc0"); dump_clock(clk, &r); clk_put(clk); - clk = clk_get(NULL, "osc1"); + clk = __clk_get(NULL, "osc1"); dump_clock(clk, &r); clk_put(clk); diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index 47ba4b9..fbc2aea 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -61,34 +61,34 @@ struct eic { static struct eic *nmi_eic; static bool nmi_enabled; -static void eic_ack_irq(struct irq_chip *d) +static void eic_ack_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); } -static void eic_mask_irq(struct irq_chip *d) +static void eic_mask_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); } -static void eic_mask_ack_irq(struct irq_chip *d) +static void eic_mask_ack_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); } -static void eic_unmask_irq(struct irq_chip *d) +static void eic_unmask_irq(struct irq_data *d) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); eic_writel(eic, IER, 1 << (d->irq - eic->first_irq)); } -static int eic_set_irq_type(struct irq_chip *d, unsigned int flow_type) +static int eic_set_irq_type(struct irq_data *d, unsigned int flow_type) { - struct eic *eic = irq_data_get_irq_chip_data(data); + struct eic *eic = irq_data_get_irq_chip_data(d); unsigned int irq = d->irq; unsigned int i = irq - eic->first_irq; u32 mode, edge, level; @@ -191,7 +191,7 @@ static int __init eic_probe(struct platform_device *pdev) regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); int_irq = platform_get_irq(pdev, 0); - if (!regs || !int_irq) { + if (!regs || (int)int_irq <= 0) { dev_dbg(&pdev->dev, "missing regs and/or irq resource\n"); return -ENXIO; } diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index 21ce35f..3e36461 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -12,7 +12,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/io.h> @@ -21,7 +21,6 @@ struct intc { void __iomem *regs; struct irq_chip chip; - struct sys_device sysdev; #ifdef CONFIG_PM unsigned long suspend_ipr; unsigned long saved_ipr[64]; @@ -146,9 +145,8 @@ void intc_set_suspend_handler(unsigned long offset) intc0.suspend_ipr = offset; } -static int intc_suspend(struct sys_device *sdev, pm_message_t state) +static int intc_suspend(void) { - struct intc *intc = container_of(sdev, struct intc, sysdev); int i; if (unlikely(!irqs_disabled())) { @@ -156,28 +154,25 @@ static int intc_suspend(struct sys_device *sdev, pm_message_t state) return -EINVAL; } - if (unlikely(!intc->suspend_ipr)) { + if (unlikely(!intc0.suspend_ipr)) { pr_err("intc_suspend: suspend_ipr not initialized\n"); return -EINVAL; } for (i = 0; i < 64; i++) { - intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i); - intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr); + intc0.saved_ipr[i] = intc_readl(&intc0, INTPR0 + 4 * i); + intc_writel(&intc0, INTPR0 + 4 * i, intc0.suspend_ipr); } return 0; } -static int intc_resume(struct sys_device *sdev) +static int intc_resume(void) { - struct intc *intc = container_of(sdev, struct intc, sysdev); int i; - WARN_ON(!irqs_disabled()); - for (i = 0; i < 64; i++) - intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]); + intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]); return 0; } @@ -186,27 +181,18 @@ static int intc_resume(struct sys_device *sdev) #define intc_resume NULL #endif -static struct sysdev_class intc_class = { - .name = "intc", +static struct syscore_ops intc_syscore_ops = { .suspend = intc_suspend, .resume = intc_resume, }; -static int __init intc_init_sysdev(void) +static int __init intc_init_syscore(void) { - int ret; - - ret = sysdev_class_register(&intc_class); - if (ret) - return ret; + register_syscore_ops(&intc_syscore_ops); - intc0.sysdev.id = 0; - intc0.sysdev.cls = &intc_class; - ret = sysdev_register(&intc0.sysdev); - - return ret; + return 0; } -device_initcall(intc_init_sysdev); +device_initcall(intc_init_syscore); unsigned long intc_get_pending(unsigned int group) { diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index f308e1d..2e0aa85 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -257,7 +257,7 @@ static void gpio_irq_mask(struct irq_data *d) pio_writel(pio, IDR, 1 << (gpio & 0x1f)); } -static void gpio_irq_unmask(struct irq_data *d)) +static void gpio_irq_unmask(struct irq_data *d) { unsigned gpio = irq_to_gpio(d->irq); struct pio_device *pio = &pio_dev[gpio >> 5]; diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S index 17503b0..f868f4c 100644 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -53,7 +53,7 @@ cpu_enter_idle: st.w r8[TI_flags], r9 unmask_interrupts sleep CPU_SLEEP_IDLE - .size cpu_idle_sleep, . - cpu_idle_sleep + .size cpu_enter_idle, . - cpu_enter_idle /* * Common return path for PM functions that don't run from diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index acb8379..2641731 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -59,7 +59,7 @@ config EXACT_HWERR be reported multiple cycles after the error happens. This delay can cause the wrong application, or even the kernel to receive a signal to be killed. If you are getting HW errors in your system, - try turning this on to ensure they are at least comming from the + try turning this on to ensure they are at least coming from the proper thread. On production systems, it is safe (and a small optimization) to say N. diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index 19e2c7c..44bd0cc 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -19,11 +19,11 @@ * Force strict CPU ordering. */ #define nop() __asm__ __volatile__ ("nop;\n\t" : : ) -#define mb() __asm__ __volatile__ ("" : : : "memory") -#define rmb() __asm__ __volatile__ ("" : : : "memory") -#define wmb() __asm__ __volatile__ ("" : : : "memory") -#define set_mb(var, value) do { (void) xchg(&var, value); } while (0) -#define read_barrier_depends() do { } while(0) +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define smp_read_barrier_depends() read_barrier_depends() #ifdef CONFIG_SMP asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value); @@ -37,16 +37,16 @@ asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr, unsigned long new, unsigned long old); #ifdef __ARCH_SYNC_CORE_DCACHE -# define smp_mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) -# define smp_rmb() do { barrier(); smp_check_barrier(); } while (0) -# define smp_wmb() do { barrier(); smp_mark_barrier(); } while (0) -#define smp_read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) - +/* Force Core data cache coherence */ +# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) +# define rmb() do { barrier(); smp_check_barrier(); } while (0) +# define wmb() do { barrier(); smp_mark_barrier(); } while (0) +# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) #else -# define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -#define smp_read_barrier_depends() barrier() +# define mb() barrier() +# define rmb() barrier() +# define wmb() barrier() +# define read_barrier_depends() do { } while (0) #endif static inline unsigned long __xchg(unsigned long x, volatile void *ptr, @@ -99,10 +99,10 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, #else /* !CONFIG_SMP */ -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() do { } while (0) struct __xchg_dummy { unsigned long a[100]; diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 9fe0da6..70c4e51 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -57,7 +57,7 @@ #define HWC_x3(level) \ "External Memory Addressing Error\n" #define EXC_0x04(level) \ - "Unimplmented exception occured\n" \ + "Unimplmented exception occurred\n" \ level " - Maybe you forgot to install a custom exception handler?\n" #define HWC_x12(level) \ "Performance Monitor Overflow\n" diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index cdbe075..8b81dc0 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -268,7 +268,7 @@ void disable_gptimers(uint16_t mask) _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) - group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i]; + group_regs[BFIN_TIMER_OCTET(i)]->status = trun_mask[i]; SSYNC(); } EXPORT_SYMBOL(disable_gptimers); diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index b8cfe34..9b80b15 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -181,7 +181,7 @@ static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) return -ENOSPC; } - /* Becasue hardware data watchpoint impelemented in current + /* Because hardware data watchpoint impelemented in current * Blackfin can not trigger an exception event as the hardware * instrction watchpoint does, we ignaore all data watch point here. * They can be turned on easily after future blackfin design diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c index 0b5f72f..401eb1d 100644 --- a/arch/blackfin/kernel/nmi.c +++ b/arch/blackfin/kernel/nmi.c @@ -12,7 +12,7 @@ #include <linux/bitops.h> #include <linux/hardirq.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/pm.h> #include <linux/nmi.h> #include <linux/smp.h> @@ -196,43 +196,31 @@ void touch_nmi_watchdog(void) /* Suspend/resume support */ #ifdef CONFIG_PM -static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state) +static int nmi_wdt_suspend(void) { nmi_wdt_stop(); return 0; } -static int nmi_wdt_resume(struct sys_device *dev) +static void nmi_wdt_resume(void) { if (nmi_active) nmi_wdt_start(); - return 0; } -static struct sysdev_class nmi_sysclass = { - .name = DRV_NAME, +static struct syscore_ops nmi_syscore_ops = { .resume = nmi_wdt_resume, .suspend = nmi_wdt_suspend, }; -static struct sys_device device_nmi_wdt = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_nmi_wdt_sysfs(void) +static int __init init_nmi_wdt_syscore(void) { - int error; - - if (!nmi_active) - return 0; + if (nmi_active) + register_syscore_ops(&nmi_syscore_ops); - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_nmi_wdt); - return error; + return 0; } -late_initcall(init_nmi_wdt_sysfs); +late_initcall(init_nmi_wdt_syscore); #endif /* CONFIG_PM */ diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 8c9a43d..9e9b60d 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -23,29 +23,6 @@ #include <asm/gptimers.h> #include <asm/nmi.h> -/* Accelerators for sched_clock() - * convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better precision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ - -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ #if defined(CONFIG_CYCLES_CLOCKSOURCE) @@ -63,7 +40,6 @@ static struct clocksource bfin_cs_cycles = { .rating = 400, .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), - .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -75,10 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void) static int __init bfin_cs_cycles_init(void) { - bfin_cs_cycles.mult = \ - clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); - - if (clocksource_register(&bfin_cs_cycles)) + if (clocksource_register_hz(&bfin_cs_cycles, get_cclk())) panic("failed to register clocksource"); return 0; @@ -111,7 +84,6 @@ static struct clocksource bfin_cs_gptimer0 = { .rating = 350, .read = bfin_read_gptimer0, .mask = CLOCKSOURCE_MASK(32), - .shift = CYC2NS_SCALE_FACTOR, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -125,10 +97,7 @@ static int __init bfin_cs_gptimer0_init(void) { setup_gptimer0(); - bfin_cs_gptimer0.mult = \ - clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift); - - if (clocksource_register(&bfin_cs_gptimer0)) + if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk())) panic("failed to register clocksource"); return 0; @@ -206,8 +175,14 @@ irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; smp_mb(); - evt->event_handler(evt); + /* + * We want to ACK before we handle so that we can handle smaller timer + * intervals. This way if the timer expires again while we're handling + * things, we're more likely to see that 2nd int rather than swallowing + * it by ACKing the int at the end of this handler. + */ bfin_gptmr0_ack(); + evt->event_handler(evt); return IRQ_HANDLED; } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 59c1df7..655f25d 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -98,7 +98,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp) /* send the appropriate signal to the user program */ switch (trapnr) { - /* This table works in conjuction with the one in ./mach-common/entry.S + /* This table works in conjunction with the one in ./mach-common/entry.S * Some exceptions are handled there (in assembly, in exception space) * Some are handled here, (in C, in interrupt space) * Some, like CPLB, are handled in both, where the normal path is diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 3edbd8d..79cacce 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -67,7 +67,7 @@ * - DMA version, which do not suffer from this issue. DMA versions have * different name (prefixed by dma_ ), and are located in * ../kernel/bfin_dma_5xx.c - * Using the dma related functions are recommended for transfering large + * Using the dma related functions are recommended for transferring large * buffers in/out of FIFOs. */ diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 80c240a..4eca566 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -60,7 +60,7 @@ ENTRY(_memmove) [P0++] = R1; CC = P2 == 0; /* any remaining bytes? */ - P3 = I0; /* Ammend P3 to updated ptr. */ + P3 = I0; /* Amend P3 to updated ptr. */ IF !CC JUMP .Lbytes; P3 = I1; RTS; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2c69785..3fa3354 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2530,7 +2530,7 @@ static struct resource bfin_pata_resources[] = { static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 0, }; -/* CompactFlash Storage Card Memory Mapped Adressing +/* CompactFlash Storage Card Memory Mapped Addressing * /REG = A11 = 1 */ static struct resource bfin_pata_resources[] = { diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index 382099f..5e4112e 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -19,9 +19,6 @@ #define DRIVER_NAME "bfin dpmc" -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg) - struct bfin_dpmc_platform_data *pdata; /** diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 46ab457..f96933f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -268,7 +268,7 @@ ENTRY(_handle_bad_cplb) /* To get here, we just tried and failed to change a CPLB * so, handle things in trap_c (C code), by lowering to * IRQ5, just like we normally do. Since this is not a - * "normal" return path, we have a do alot of stuff to + * "normal" return path, we have a do a lot of stuff to * the stack to get ready so, we can fall through - we * need to make a CPLB exception look like a normal exception */ @@ -817,7 +817,7 @@ _new_old_task: rets = [sp++]; /* - * When we come out of resume, r0 carries "old" task, becuase we are + * When we come out of resume, r0 carries "old" task, because we are * in "new" task. */ rts; diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 581e2b0..76de572 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -174,7 +174,7 @@ ENTRY(__start) sp.l = lo(KERNEL_CLOCK_STACK); sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; - sp = usp; /* usp hasnt been touched, so restore from there */ + sp = usp; /* usp hasn't been touched, so restore from there */ #endif /* This section keeps the processor in supervisor mode diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 6e17a26..1fbd94c 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -109,10 +109,23 @@ static void ipi_flush_icache(void *info) struct blackfin_flush_data *fdata = info; /* Invalidate the memory holding the bounds of the flushed region. */ - invalidate_dcache_range((unsigned long)fdata, - (unsigned long)fdata + sizeof(*fdata)); + blackfin_dcache_invalidate_range((unsigned long)fdata, + (unsigned long)fdata + sizeof(*fdata)); + + /* Make sure all write buffers in the data side of the core + * are flushed before trying to invalidate the icache. This + * needs to be after the data flush and before the icache + * flush so that the SSYNC does the right thing in preventing + * the instruction prefetcher from hitting things in cached + * memory at the wrong time -- it runs much further ahead than + * the pipeline. + */ + SSYNC(); - flush_icache_range(fdata->start, fdata->end); + /* ipi_flaush_icache is invoked by generic flush_icache_range, + * so call blackfin arch icache flush directly here. + */ + blackfin_icache_flush_range(fdata->start, fdata->end); } static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) @@ -164,6 +177,9 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) while (msg_queue->count) { msg = &msg_queue->ipi_message[msg_queue->head]; switch (msg->type) { + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; case BFIN_IPI_CALL_FUNC: spin_unlock_irqrestore(&msg_queue->lock, flags); ipi_call_function(cpu, msg); diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 517d1f0..67731d7 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -38,7 +38,7 @@ space. We also use it to keep the user-mode virtual mapping in the same map during kernel-mode, so that the kernel easily can access the corresponding user-mode process' data. -As a comparision, the Linux/i386 2.0 puts the kernel and physical RAM at +As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at address 0, overlapping with the user-mode virtual space, so that descriptor registers are needed for each memory access to specify which MMU space to map through. That changed in 2.2, putting the kernel/physical RAM at diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 399dc1e..85026537 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -31,7 +31,7 @@ #include <asm/sync_serial.h> #include <arch/io_interface_mux.h> -/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* The receiver is a bit tricky because of the continuous stream of data.*/ /* */ /* Three DMA descriptors are linked together. Each DMA descriptor is */ /* responsible for port->bufchunk of a common buffer. */ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 3d75125..7b155f8 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -215,7 +215,7 @@ static struct mtd_partition main_partition = { }; #endif -/* Auxilliary partition if we find another flash */ +/* Auxiliary partition if we find another flash */ static struct mtd_partition aux_partition = { .name = "aux", .size = 0, diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index 25d6f2b..f58f2c1 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -165,7 +165,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) /* Enable the following for a flash based bad block table */ /* this->options = NAND_USE_FLASH_BBT; */ - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index c5a0f54..d5b0cc9 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -156,7 +156,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) /* Enable the following for a flash based bad block table */ /* this->options = NAND_USE_FLASH_BBT; */ - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index c8637a9..a6a180b 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -33,7 +33,7 @@ #include <asm/sync_serial.h> -/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +/* The receiver is a bit tricky because of the continuous stream of data.*/ /* */ /* Three DMA descriptors are linked together. Each DMA descriptor is */ /* responsible for port->bufchunk of a common buffer. */ diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 0ecb50b..3abf12c 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -182,7 +182,7 @@ _syscall_traced: move.d $r0, [$sp] ;; The registers carrying parameters (R10-R13) are intact. The optional - ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them + ;; fifth and sixth parameters is in MOF and SRP respectively. Put them ;; back on the stack. subq 4, $sp move $srp, [$sp] diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index 8023176..68a1a59 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -374,7 +374,7 @@ crisv32_do_multiple(struct pt_regs* regs) irq_enter(); for (i = 0; i < NBR_REGS; i++) { - /* Get which IRQs that happend. */ + /* Get which IRQs that happened. */ masked[i] = REG_RD_INT_VECT(intr_vect, irq_regs[cpu], r_masked_vect, i); diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 6b65332..c0343c3 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -925,7 +925,7 @@ stub_is_stopped(int sigval) if (reg.eda >= bp_d_regs[bp * 2] && reg.eda <= bp_d_regs[bp * 2 + 1]) { - /* EDA withing range for this BP; it must be the one + /* EDA within range for this BP; it must be the one we're looking for. */ stopped_data_address = reg.eda; break; diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index 562f847..0570e8c 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -149,7 +149,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, childregs->r10 = 0; /* Child returns 0 after a fork/clone. */ /* Set a new TLS ? - * The TLS is in $mof beacuse it is the 5th argument to sys_clone. + * The TLS is in $mof because it is the 5th argument to sys_clone. */ if (p->mm && (clone_flags & CLONE_SETTLS)) { task_thread_info(p)->tls = regs->mof; diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index b3a05ae..ce4ab1a 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -610,7 +610,7 @@ ugdb_trap_user(struct thread_info *ti, int sig) user_regs(ti)->spc = 0; } /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA - not withing any configured h/w breakpoint range). Synchronize with + not within any configured h/w breakpoint range). Synchronize with what already exists for kernel debugging. */ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { /* Break 8: subtract 2 from ERP unless in a delay slot. */ diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 4c9e3e1..66cc756 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -342,15 +342,18 @@ irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id) ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi); + if (ipi.vector & IPI_SCHEDULE) { + scheduler_ipi(); + } if (ipi.vector & IPI_CALL) { - func(info); + func(info); } if (ipi.vector & IPI_FLUSH_TLB) { - if (flush_mm == FLUSH_ALL) - __flush_tlb_all(); - else if (flush_vma == FLUSH_ALL) + if (flush_mm == FLUSH_ALL) + __flush_tlb_all(); + else if (flush_vma == FLUSH_ALL) __flush_tlb_mm(flush_mm); - else + else __flush_tlb_page(flush_vma, flush_addr); } diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c index 8b924db..15f5c9d 100644 --- a/arch/cris/arch-v32/mach-a3/arbiter.c +++ b/arch/cris/arch-v32/mach-a3/arbiter.c @@ -568,7 +568,7 @@ crisv32_foo_arbiter_irq(int irq, void *dev_id) REG_WR(marb_foo_bp, watch->instance, rw_ack, ack); REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr); - printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()); + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()); if (watch->cb) watch->cb(); @@ -624,7 +624,7 @@ crisv32_bar_arbiter_irq(int irq, void *dev_id) REG_WR(marb_bar_bp, watch->instance, rw_ack, ack); REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr); - printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()->erp); + printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp); if (watch->cb) watch->cb(); diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c index 82ef293..3f8ebb5 100644 --- a/arch/cris/arch-v32/mach-fs/arbiter.c +++ b/arch/cris/arch-v32/mach-fs/arbiter.c @@ -395,7 +395,7 @@ static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id) REG_WR(marb_bp, watch->instance, rw_ack, ack); REG_WR(marb, regi_marb, rw_ack_intr, ack_intr); - printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp); + printk(KERN_INFO "IRQ occurred at %lX\n", get_irq_regs()->erp); if (watch->cb) watch->cb(); diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S index 2fafe24..af55df0 100644 --- a/arch/cris/boot/rescue/head_v10.S +++ b/arch/cris/boot/rescue/head_v10.S @@ -7,7 +7,7 @@ * for each partition that this code should check. * * If any of the checksums fail, we assume the flash is so - * corrupt that we cant use it to boot into the ftp flash + * corrupt that we can't use it to boot into the ftp flash * loader, and instead we initialize the serial port to * receive a flash-loader and new flash image. we dont include * any flash code here, but just accept a certain amount of diff --git a/arch/cris/include/arch-v32/arch/hwregs/Makefile b/arch/cris/include/arch-v32/arch/hwregs/Makefile index f9a05d2..b8b3f8d 100644 --- a/arch/cris/include/arch-v32/arch/hwregs/Makefile +++ b/arch/cris/include/arch-v32/arch/hwregs/Makefile @@ -1,6 +1,6 @@ # Makefile to generate or copy the latest register definitions # and related datastructures and helpermacros. -# The offical place for these files is at: +# The official place for these files is at: RELEASE ?= r1_alfa5 OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile index a90056a..0747a22 100644 --- a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile +++ b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile @@ -1,7 +1,7 @@ # $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $ # Makefile to generate or copy the latest register definitions # and related datastructures and helpermacros. -# The offical place for these files is probably at: +# The official place for these files is probably at: RELEASE ?= r1_alfa5 IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/ diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h index 9eaae21..7df4301 100644 --- a/arch/cris/include/asm/pgtable.h +++ b/arch/cris/include/asm/pgtable.h @@ -97,7 +97,7 @@ extern unsigned long empty_zero_page; #define pte_clear(mm,addr,xp) do { pte_val(*(xp)) = 0; } while (0) #define pmd_none(x) (!pmd_val(x)) -/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad +/* by removing the _PAGE_KERNEL bit from the comparison, the same pmd_bad * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries. */ #define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE) diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c index 541efbf0..8da53f3 100644 --- a/arch/cris/kernel/traps.c +++ b/arch/cris/kernel/traps.c @@ -183,7 +183,7 @@ __initcall(oops_nmi_register); /* * This gets called from entry.S when the watchdog has bitten. Show something - * similiar to an Oops dump, and if the kernel is configured to be a nice + * similar to an Oops dump, and if the kernel is configured to be a nice * doggy, then halt instead of reboot. */ void diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h index 0d59979..ef03baf 100644 --- a/arch/frv/include/asm/pci.h +++ b/arch/frv/include/asm/pci.h @@ -54,7 +54,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, #endif /* - * These are pretty much arbitary with the CoMEM implementation. + * These are pretty much arbitrary with the CoMEM implementation. * We have the whole address space to ourselves. */ #define PCIBIOS_MIN_IO 0x100 diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h index 01e6af5..d388302 100644 --- a/arch/frv/include/asm/spr-regs.h +++ b/arch/frv/include/asm/spr-regs.h @@ -274,7 +274,7 @@ #define MSR0_RD 0xc0000000 /* rounding mode */ #define MSR0_RD_NEAREST 0x00000000 /* - nearest */ #define MSR0_RD_ZERO 0x40000000 /* - zero */ -#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */ +#define MSR0_RD_POS_INF 0x80000000 /* - positive infinity */ #define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */ /* diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h index 59788fa..b26d70a 100644 --- a/arch/frv/include/asm/virtconvert.h +++ b/arch/frv/include/asm/virtconvert.h @@ -1,4 +1,4 @@ -/* virtconvert.h: virtual/physical/page address convertion +/* virtconvert.h: virtual/physical/page address conversion * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S index bf35f33..06c5ae1 100644 --- a/arch/frv/kernel/entry-table.S +++ b/arch/frv/kernel/entry-table.S @@ -86,7 +86,7 @@ __break_usertrap_fixup_table: .globl __break_kerneltrap_fixup_table __break_kerneltrap_fixup_table: - # handler declaration for a sofware or program interrupt + # handler declaration for a software or program interrupt .macro VECTOR_SOFTPROG tbr_tt, vec .section .trap.user .org \tbr_tt @@ -145,7 +145,7 @@ __break_kerneltrap_fixup_table: .long \vec .endm - # handler declaration for an MMU only sofware or program interrupt + # handler declaration for an MMU only software or program interrupt .macro VECTOR_SP_MMU tbr_tt, vec #ifdef CONFIG_MMU VECTOR_SOFTPROG \tbr_tt, \vec diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index c4ea092..e5cc56a 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -414,11 +414,11 @@ config PERMIT_BSP_REMOVE support. config FORCE_CPEI_RETARGET - bool "Force assumption that CPEI can be re-targetted" + bool "Force assumption that CPEI can be re-targeted" depends on PERMIT_BSP_REMOVE default n ---help--- - Say Y if you need to force the assumption that CPEI can be re-targetted to + Say Y if you need to force the assumption that CPEI can be re-targeted to any cpu in the system. This hint is available via ACPI 3.0 specifications. Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. This option it useful to enable this feature on older BIOS's as well. diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h index 6a29250..2e69284 100644 --- a/arch/ia64/include/asm/pal.h +++ b/arch/ia64/include/asm/pal.h @@ -1669,7 +1669,7 @@ typedef union pal_vp_info_u { } pal_vp_info_u_t; /* - * Returns infomation about virtual processor features + * Returns information about virtual processor features */ static inline s64 ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id) diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h index 74724b2..a2d560c 100644 --- a/arch/ia64/include/asm/perfmon_default_smpl.h +++ b/arch/ia64/include/asm/perfmon_default_smpl.h @@ -67,8 +67,8 @@ typedef struct { unsigned long ip; /* where did the overflow interrupt happened */ unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */ - unsigned short cpu; /* cpu on which the overflow occured */ - unsigned short set; /* event set active when overflow ocurred */ + unsigned short cpu; /* cpu on which the overflow occurred */ + unsigned short set; /* event set active when overflow occurred */ int tgid; /* thread group id (for NPTL, this is getpid()) */ } pfm_default_smpl_entry_t; diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h index 96798d2..cc6c4db 100644 --- a/arch/ia64/include/asm/sn/bte.h +++ b/arch/ia64/include/asm/sn/bte.h @@ -216,7 +216,7 @@ extern void bte_error_handler(unsigned long); bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) /* - * The following is the prefered way of calling bte_unaligned_copy + * The following is the preferred way of calling bte_unaligned_copy * If the copy is fully cache line aligned, then bte_copy is * used instead. Since bte_copy is inlined, this saves a call * stack. NOTE: bte_copy is called synchronously and does block diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h index 7de1d1d..a84d870 100644 --- a/arch/ia64/include/asm/sn/shub_mmr.h +++ b/arch/ia64/include/asm/sn/shub_mmr.h @@ -459,7 +459,7 @@ /* ==================================================================== */ /* Some MMRs are functionally identical (or close enough) on both SHUB1 */ /* and SHUB2 that it makes sense to define a geberic name for the MMR. */ -/* It is acceptible to use (for example) SH_IPI_INT to reference the */ +/* It is acceptable to use (for example) SH_IPI_INT to reference the */ /* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ /* on the type of the SHUB. Do not use these #defines in performance */ /* critical code or loops - there is a small performance penalty. */ diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h index 6052422..ecb8a49 100644 --- a/arch/ia64/include/asm/sn/shubio.h +++ b/arch/ia64/include/asm/sn/shubio.h @@ -1383,7 +1383,7 @@ typedef union ii_ibcr_u { * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * * errant header is thereby captured, and no further spurious read * * respones are captured until IXSS[VALID] is cleared by setting the * - * appropriate bit in IECLR.Everytime a spurious read response is * + * appropriate bit in IECLR. Every time a spurious read response is * * detected, the SPUR_RD bit of the PRB corresponding to the incoming * * message's SIDN field is set. This always happens, regarless of * * whether a header is captured. The programmer should check * @@ -2738,7 +2738,7 @@ typedef union ii_ippr_u { /************************************************************************ * * * The following defines which were not formed into structures are * - * probably indentical to another register, and the name of the * + * probably identical to another register, and the name of the * * register is provided against each of these registers. This * * information needs to be checked carefully * * * diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c index 22f6152..f09b174 100644 --- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c +++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c @@ -23,8 +23,6 @@ #include <linux/acpi.h> #include <acpi/processor.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) - MODULE_AUTHOR("Venkatesh Pallipadi"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); MODULE_LICENSE("GPL"); @@ -47,12 +45,12 @@ processor_set_pstate ( { s64 retval; - dprintk("processor_set_pstate\n"); + pr_debug("processor_set_pstate\n"); retval = ia64_pal_set_pstate((u64)value); if (retval) { - dprintk("Failed to set freq to 0x%x, with error 0x%lx\n", + pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n", value, retval); return -ENODEV; } @@ -67,14 +65,14 @@ processor_get_pstate ( u64 pstate_index = 0; s64 retval; - dprintk("processor_get_pstate\n"); + pr_debug("processor_get_pstate\n"); retval = ia64_pal_get_pstate(&pstate_index, PAL_GET_PSTATE_TYPE_INSTANT); *value = (u32) pstate_index; if (retval) - dprintk("Failed to get current freq with " + pr_debug("Failed to get current freq with " "error 0x%lx, idx 0x%x\n", retval, *value); return (int)retval; @@ -90,7 +88,7 @@ extract_clock ( { unsigned long i; - dprintk("extract_clock\n"); + pr_debug("extract_clock\n"); for (i = 0; i < data->acpi_data.state_count; i++) { if (value == data->acpi_data.states[i].status) @@ -110,7 +108,7 @@ processor_get_freq ( cpumask_t saved_mask; unsigned long clock_freq; - dprintk("processor_get_freq\n"); + pr_debug("processor_get_freq\n"); saved_mask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask_of(cpu)); @@ -148,7 +146,7 @@ processor_set_freq ( cpumask_t saved_mask; int retval; - dprintk("processor_set_freq\n"); + pr_debug("processor_set_freq\n"); saved_mask = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask_of(cpu)); @@ -159,16 +157,16 @@ processor_set_freq ( if (state == data->acpi_data.state) { if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", state); + pr_debug("Called after resume, resetting to P%d\n", state); data->resume = 0; } else { - dprintk("Already at target state (P%d)\n", state); + pr_debug("Already at target state (P%d)\n", state); retval = 0; goto migrate_end; } } - dprintk("Transitioning from P%d to P%d\n", + pr_debug("Transitioning from P%d to P%d\n", data->acpi_data.state, state); /* cpufreq frequency struct */ @@ -186,7 +184,7 @@ processor_set_freq ( value = (u32) data->acpi_data.states[state].control; - dprintk("Transitioning to state: 0x%08x\n", value); + pr_debug("Transitioning to state: 0x%08x\n", value); ret = processor_set_pstate(value); if (ret) { @@ -219,7 +217,7 @@ acpi_cpufreq_get ( { struct cpufreq_acpi_io *data = acpi_io_data[cpu]; - dprintk("acpi_cpufreq_get\n"); + pr_debug("acpi_cpufreq_get\n"); return processor_get_freq(data, cpu); } @@ -235,7 +233,7 @@ acpi_cpufreq_target ( unsigned int next_state = 0; unsigned int result = 0; - dprintk("acpi_cpufreq_setpolicy\n"); + pr_debug("acpi_cpufreq_setpolicy\n"); result = cpufreq_frequency_table_target(policy, data->freq_table, target_freq, relation, &next_state); @@ -255,7 +253,7 @@ acpi_cpufreq_verify ( unsigned int result = 0; struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - dprintk("acpi_cpufreq_verify\n"); + pr_debug("acpi_cpufreq_verify\n"); result = cpufreq_frequency_table_verify(policy, data->freq_table); @@ -273,7 +271,7 @@ acpi_cpufreq_cpu_init ( struct cpufreq_acpi_io *data; unsigned int result = 0; - dprintk("acpi_cpufreq_cpu_init\n"); + pr_debug("acpi_cpufreq_cpu_init\n"); data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) @@ -288,7 +286,7 @@ acpi_cpufreq_cpu_init ( /* capability check */ if (data->acpi_data.state_count <= 1) { - dprintk("No P-States\n"); + pr_debug("No P-States\n"); result = -ENODEV; goto err_unreg; } @@ -297,7 +295,7 @@ acpi_cpufreq_cpu_init ( ACPI_ADR_SPACE_FIXED_HARDWARE) || (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Unsupported address space [%d, %d]\n", + pr_debug("Unsupported address space [%d, %d]\n", (u32) (data->acpi_data.control_register.space_id), (u32) (data->acpi_data.status_register.space_id)); result = -ENODEV; @@ -348,7 +346,7 @@ acpi_cpufreq_cpu_init ( "activated.\n", cpu); for (i = 0; i < data->acpi_data.state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", + pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", (i == data->acpi_data.state?'*':' '), i, (u32) data->acpi_data.states[i].core_frequency, (u32) data->acpi_data.states[i].power, @@ -383,7 +381,7 @@ acpi_cpufreq_cpu_exit ( { struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - dprintk("acpi_cpufreq_cpu_exit\n"); + pr_debug("acpi_cpufreq_cpu_exit\n"); if (data) { cpufreq_frequency_table_put_attr(policy->cpu); @@ -418,7 +416,7 @@ static struct cpufreq_driver acpi_cpufreq_driver = { static int __init acpi_cpufreq_init (void) { - dprintk("acpi_cpufreq_init\n"); + pr_debug("acpi_cpufreq_init\n"); return cpufreq_register_driver(&acpi_cpufreq_driver); } @@ -427,7 +425,7 @@ acpi_cpufreq_init (void) static void __exit acpi_cpufreq_exit (void) { - dprintk("acpi_cpufreq_exit\n"); + pr_debug("acpi_cpufreq_exit\n"); cpufreq_unregister_driver(&acpi_cpufreq_driver); return; diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index d52f1f7..f64097b 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -31,8 +31,6 @@ static struct clocksource clocksource_cyclone = { .rating = 300, .read = read_cyclone, .mask = (1LL << 40) - 1, - .mult = 0, /*to be caluclated*/ - .shift = 16, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -118,9 +116,7 @@ int __init init_cyclone_clock(void) /* initialize last tick */ cyclone_mc = cyclone_timer; clocksource_cyclone.fsys_mmio = cyclone_timer; - clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ, - clocksource_cyclone.shift); - clocksource_register(&clocksource_cyclone); + clocksource_register_hz(&clocksource_cyclone, CYCLONE_TIMER_FREQ); return 0; } diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 5b70474..782c3a35 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -31,6 +31,7 @@ #include <linux/irq.h> #include <linux/ratelimit.h> #include <linux/acpi.h> +#include <linux/sched.h> #include <asm/delay.h> #include <asm/intrinsics.h> @@ -496,6 +497,7 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs) smp_local_flush_tlb(); kstat_incr_irqs_this_cpu(irq, desc); } else if (unlikely(IS_RESCHEDULE(vector))) { + scheduler_ipi(); kstat_incr_irqs_this_cpu(irq, desc); } else { ia64_setreg(_IA64_REG_CR_TPR, vector); diff --git a/arch/ia64/kernel/perfmon_default_smpl.c b/arch/ia64/kernel/perfmon_default_smpl.c index 5f637bb..30c644e 100644 --- a/arch/ia64/kernel/perfmon_default_smpl.c +++ b/arch/ia64/kernel/perfmon_default_smpl.c @@ -150,7 +150,7 @@ default_handler(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct * current = task running at the time of the overflow. * * per-task mode: - * - this is ususally the task being monitored. + * - this is usually the task being monitored. * Under certain conditions, it might be a different task * * system-wide: diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 44f11ee..14ec641 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -703,7 +703,7 @@ int migrate_platform_irqs(unsigned int cpu) data->chip->irq_disable(data); data->chip->irq_set_affinity(data, mask, false); data->chip->irq_enable(data); - printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + printk ("Re-targeting CPEI to cpu %d\n", new_cpei_cpu); } } if (!data) { diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 156ad80..04440cc 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -73,8 +73,6 @@ static struct clocksource clocksource_itc = { .rating = 350, .read = itc_get_cycles, .mask = CLOCKSOURCE_MASK(64), - .mult = 0, /*to be calculated*/ - .shift = 16, .flags = CLOCK_SOURCE_IS_CONTINUOUS, #ifdef CONFIG_PARAVIRT .resume = paravirt_clocksource_resume, @@ -365,11 +363,8 @@ ia64_init_itm (void) ia64_cpu_local_tick(); if (!itc_clocksource) { - /* Sort out mult/shift values: */ - clocksource_itc.mult = - clocksource_hz2mult(local_cpu_data->itc_freq, - clocksource_itc.shift); - clocksource_register(&clocksource_itc); + clocksource_register_hz(&clocksource_itc, + local_cpu_data->itc_freq); itc_clocksource = &clocksource_itc; } } diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 0baa1bb..0e0e0cc 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -43,7 +43,7 @@ int __ref arch_register_cpu(int num) { #ifdef CONFIG_ACPI /* - * If CPEI can be re-targetted or if this is not + * If CPEI can be re-targeted or if this is not * CPEI target, then it is hotpluggable */ if (can_cpei_retarget() || !is_cpu_cpei_target(num)) diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c index bb862fb..b039874 100644 --- a/arch/ia64/kvm/process.c +++ b/arch/ia64/kvm/process.c @@ -987,7 +987,7 @@ static void vmm_sanity_check(struct kvm_vcpu *vcpu) static void kvm_do_resume_op(struct kvm_vcpu *vcpu) { - vmm_sanity_check(vcpu); /*Guarantee vcpu runing on healthy vmm!*/ + vmm_sanity_check(vcpu); /*Guarantee vcpu running on healthy vmm!*/ if (test_and_clear_bit(KVM_REQ_RESUME, &vcpu->requests)) { vcpu_do_resume(vcpu); diff --git a/arch/ia64/lib/do_csum.S b/arch/ia64/lib/do_csum.S index 6bec2fc..1a431a5 100644 --- a/arch/ia64/lib/do_csum.S +++ b/arch/ia64/lib/do_csum.S @@ -201,7 +201,7 @@ GLOBAL_ENTRY(do_csum) ;; (p6) adds result1[0]=1,result1[0] (p9) br.cond.sptk .do_csum_exit // if (count == 1) exit - // Fall through to caluculate the checksum, feeding result1[0] as + // Fall through to calculate the checksum, feeding result1[0] as // the initial value in result1[0]. // // Calculate the checksum loading two 8-byte words per loop. diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 139c018..81a1f4e 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -227,7 +227,7 @@ void sn_set_err_irq_affinity(unsigned int irq) { /* * On systems which support CPU disabling (SHub2), all error interrupts - * are targetted at the boot CPU. + * are targeted at the boot CPU. */ if (is_shub2() && sn_prom_feature_available(PRF_CPU_DISABLE_SUPPORT)) set_irq_affinity_info(irq, cpu_physical_id(0), 0); @@ -435,7 +435,7 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) /* * Bridge types attached to TIO (anything but PIC) do not need this WAR * since they do not target Shub II interrupt registers. If that - * ever changes, this check needs to accomodate. + * ever changes, this check needs to accommodate. */ if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC) return; diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c index 21d6f09..c34efda 100644 --- a/arch/ia64/sn/kernel/sn2/timer.c +++ b/arch/ia64/sn/kernel/sn2/timer.c @@ -33,8 +33,6 @@ static struct clocksource clocksource_sn2 = { .rating = 450, .read = read_sn2, .mask = (1LL << 55) - 1, - .mult = 0, - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -57,9 +55,7 @@ ia64_sn_udelay (unsigned long usecs) void __init sn_timer_init(void) { clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR; - clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second, - clocksource_sn2.shift); - clocksource_register(&clocksource_sn2); + clocksource_register_hz(&clocksource_sn2, sn_rtc_cycles_per_second); ia64_udelay = &ia64_sn_udelay; } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index c659ad5..33def66 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -227,7 +227,7 @@ pcibr_dma_unmap(struct pci_dev *hwdev, dma_addr_t dma_handle, int direction) * after doing the read. For PIC this routine then forces a fake interrupt * on another line, which is logically associated with the slot that the PIO * is addressed to. It then spins while watching the memory location that - * the interrupt is targetted to. When the interrupt response arrives, we + * the interrupt is targeted to. When the interrupt response arrives, we * are sure that the DMA has landed in memory and it is safe for the driver * to proceed. For TIOCP use the Device(x) Write Request Buffer Flush * Bridge register since it ensures the data has entered the coherence domain, diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c index 108bb85..b279e14 100644 --- a/arch/ia64/xen/irq_xen.c +++ b/arch/ia64/xen/irq_xen.c @@ -92,6 +92,8 @@ static unsigned short saved_irq_cnt; static int xen_slab_ready; #ifdef CONFIG_SMP +#include <linux/sched.h> + /* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ, * it ends up to issue several memory accesses upon percpu data and * thus adds unnecessary traffic to other paths. @@ -99,7 +101,13 @@ static int xen_slab_ready; static irqreturn_t xen_dummy_handler(int irq, void *dev_id) { + return IRQ_HANDLED; +} +static irqreturn_t +xen_resched_handler(int irq, void *dev_id) +{ + scheduler_ipi(); return IRQ_HANDLED; } @@ -110,7 +118,7 @@ static struct irqaction xen_ipi_irqaction = { }; static struct irqaction xen_resched_irqaction = { - .handler = xen_dummy_handler, + .handler = xen_resched_handler, .flags = IRQF_DISABLED, .name = "resched" }; diff --git a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h index 2dc89d6..1feae97 100644 --- a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h +++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/m32104ut/m32104ut_pld.h * - * Definitions for Programable Logic Device(PLD) on M32104UT board. + * Definitions for Programmable Logic Device(PLD) on M32104UT board. * Based on m32700ut_pld.h * * Copyright (c) 2002 Takeo Takahashi diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h index 57623be..3529467 100644 --- a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h +++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/m32700ut/m32700ut_pld.h * - * Definitions for Programable Logic Device(PLD) on M32700UT board. + * Definitions for Programmable Logic Device(PLD) on M32700UT board. * * Copyright (c) 2002 Takeo Takahashi * diff --git a/arch/m32r/include/asm/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h index 3f11ea1..6901401 100644 --- a/arch/m32r/include/asm/opsput/opsput_pld.h +++ b/arch/m32r/include/asm/opsput/opsput_pld.h @@ -4,7 +4,7 @@ /* * include/asm-m32r/opsput/opsput_pld.h * - * Definitions for Programable Logic Device(PLD) on OPSPUT board. + * Definitions for Programmable Logic Device(PLD) on OPSPUT board. * * Copyright (c) 2002 Takeo Takahashi * diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h index bca3475..9cdaf73 100644 --- a/arch/m32r/include/asm/pgtable-2level.h +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -44,7 +44,7 @@ static inline int pgd_present(pgd_t pgd) { return 1; } #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) /* - * (pmds are folded into pgds so this doesnt get actually called, + * (pmds are folded into pgds so this doesn't get actually called, * but the define is needed for a generic inline function.) */ #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 31cef20..fc10b39 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -122,8 +122,6 @@ void smp_send_reschedule(int cpu_id) * * Description: This routine executes on CPU which received * 'RESCHEDULE_IPI'. - * Rescheduling is processed at the exit of interrupt - * operation. * * Born on Date: 2002.02.05 * @@ -138,7 +136,7 @@ void smp_send_reschedule(int cpu_id) *==========================================================================*/ void smp_reschedule_interrupt(void) { - /* nothing to do */ + scheduler_ipi(); } /*==========================================================================* diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index b8ec002..2c9aeb4 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -120,7 +120,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code, /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunatly, in the case of an + * kernel and should generate an OOPS. Unfortunately, in the case of an * erroneous fault occurring in a code path which already holds mmap_sem * we will deadlock attempting to validate the fault against the * address space. Luckily the kernel only validly references user @@ -128,7 +128,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code, * exceptions table. * * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibilty of a deadlock. + * the source reference check when there is a possibility of a deadlock. * Attempt to lock the address space, if we cannot we then validate the * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 5890897..95022b0 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -36,13 +36,10 @@ /* Hook for MIDI serial driver */ void (*atari_MIDI_interrupt_hook) (void); -/* Hook for mouse driver */ -void (*atari_mouse_interrupt_hook) (char *); /* Hook for keyboard inputdev driver */ void (*atari_input_keyboard_interrupt_hook) (unsigned char, char); /* Hook for mouse inputdev driver */ void (*atari_input_mouse_interrupt_hook) (char *); -EXPORT_SYMBOL(atari_mouse_interrupt_hook); EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook); EXPORT_SYMBOL(atari_input_mouse_interrupt_hook); @@ -130,7 +127,7 @@ KEYBOARD_STATE kb_state; * it's really hard to decide whether they're mouse or keyboard bytes. Since * overruns usually occur when moving the Atari mouse rapidly, they're seen as * mouse bytes here. If this is wrong, only a make code of the keyboard gets - * lost, which isn't too bad. Loosing a break code would be disastrous, + * lost, which isn't too bad. Losing a break code would be disastrous, * because then the keyboard repeat strikes... */ @@ -263,8 +260,8 @@ repeat: kb_state.buf[kb_state.len++] = scancode; if (kb_state.len == 3) { kb_state.state = KEYBOARD; - if (atari_mouse_interrupt_hook) - atari_mouse_interrupt_hook(kb_state.buf); + if (atari_input_mouse_interrupt_hook) + atari_input_mouse_interrupt_hook(kb_state.buf); } break; @@ -575,7 +572,7 @@ int atari_keyb_init(void) kb_state.len = 0; error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt, - IRQ_TYPE_SLOW, "keyboard/mouse/MIDI", + IRQ_TYPE_SLOW, "keyboard,mouse,MIDI", atari_keyboard_interrupt); if (error) return error; diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c index 604329f..ddbf43c 100644 --- a/arch/m68k/atari/stdma.c +++ b/arch/m68k/atari/stdma.c @@ -180,7 +180,7 @@ void __init stdma_init(void) { stdma_isr = NULL; if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED, - "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int)) + "ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int)) pr_err("Couldn't register ST-DMA interrupt\n"); } diff --git a/arch/m68k/fpsp040/bindec.S b/arch/m68k/fpsp040/bindec.S index 72f1159..f2e7952 100644 --- a/arch/m68k/fpsp040/bindec.S +++ b/arch/m68k/fpsp040/bindec.S @@ -609,7 +609,7 @@ do_fint: | A6. This test occurs only on the first pass. If the | result is exactly 10^LEN, decrement ILOG and divide | the mantissa by 10. The calculation of 10^LEN cannot -| be inexact, since all powers of ten upto 10^27 are exact +| be inexact, since all powers of ten up to 10^27 are exact | in extended precision, so the use of a previous power-of-ten | table will introduce no error. | diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 26e85e2..78cb60f 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -11813,7 +11813,7 @@ fmul_unfl_ena: bne.b fmul_unfl_ena_sd # no, sgl or dbl # if the rnd mode is anything but RZ, then we have to re-do the above -# multiplication becuase we used RZ for all. +# multiplication because we used RZ for all. fmov.l L_SCR3(%a6),%fpcr # set FPCR fmul_unfl_ena_cont: @@ -18095,7 +18095,7 @@ fscc_mem_op: rts -# addresing mode is post-increment. write the result byte. if the write +# addressing mode is post-increment. write the result byte. if the write # fails then don't update the address register. if write passes then # call inc_areg() to update the address register. fscc_mem_inc: @@ -20876,7 +20876,7 @@ dst_get_dupper: swap %d0 # d0 now in upper word lsl.l &0x4,%d0 # d0 in proper place for dbl prec exp tst.b FTEMP_EX(%a0) # test sign - bpl.b dst_get_dman # if postive, go process mantissa + bpl.b dst_get_dman # if positive, go process mantissa bset &0x1f,%d0 # if negative, set sign dst_get_dman: mov.l FTEMP_HI(%a0),%d1 # get ms mantissa @@ -22943,7 +22943,7 @@ tbl_ovfl_result: # FP_SRC(a6) = packed operand now as a binary FP number # # # # ALGORITHM *********************************************************** # -# Get the correct <ea> whihc is the value on the exception stack # +# Get the correct <ea> which is the value on the exception stack # # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+. # # Then, fetch the operand from memory. If the fetch fails, exit # # through facc_in_x(). # @@ -24096,7 +24096,7 @@ do_fint12: # A6. This test occurs only on the first pass. If the # result is exactly 10^LEN, decrement ILOG and divide # the mantissa by 10. The calculation of 10^LEN cannot -# be inexact, since all powers of ten upto 10^27 are exact +# be inexact, since all powers of ten up to 10^27 are exact # in extended precision, so the use of a previous power-of-ten # table will introduce no error. # diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index e71ba0a..4aedef9 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -7777,7 +7777,7 @@ dst_get_dupper: swap %d0 # d0 now in upper word lsl.l &0x4,%d0 # d0 in proper place for dbl prec exp tst.b FTEMP_EX(%a0) # test sign - bpl.b dst_get_dman # if postive, go process mantissa + bpl.b dst_get_dman # if positive, go process mantissa bset &0x1f,%d0 # if negative, set sign dst_get_dman: mov.l FTEMP_HI(%a0),%d1 # get ms mantissa @@ -8244,7 +8244,7 @@ fmul_unfl_ena: bne.b fmul_unfl_ena_sd # no, sgl or dbl # if the rnd mode is anything but RZ, then we have to re-do the above -# multiplication becuase we used RZ for all. +# multiplication because we used RZ for all. fmov.l L_SCR3(%a6),%fpcr # set FPCR fmul_unfl_ena_cont: @@ -12903,7 +12903,7 @@ store_fpreg_7: # FP_SRC(a6) = packed operand now as a binary FP number # # # # ALGORITHM *********************************************************** # -# Get the correct <ea> whihc is the value on the exception stack # +# Get the correct <ea> which is the value on the exception stack # # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+. # # Then, fetch the operand from memory. If the fetch fails, exit # # through facc_in_x(). # @@ -14056,7 +14056,7 @@ do_fint12: # A6. This test occurs only on the first pass. If the # result is exactly 10^LEN, decrement ILOG and divide # the mantissa by 10. The calculation of 10^LEN cannot -# be inexact, since all powers of ten upto 10^27 are exact +# be inexact, since all powers of ten up to 10^27 are exact # in extended precision, so the use of a previous power-of-ten # table will introduce no error. # diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h index f597892..656bbbf 100644 --- a/arch/m68k/include/asm/atariints.h +++ b/arch/m68k/include/asm/atariints.h @@ -146,7 +146,7 @@ static inline void clear_mfp_bit( unsigned irq, int type ) /* * {en,dis}able_irq have the usual semantics of temporary blocking the - * interrupt, but not loosing requests that happen between disabling and + * interrupt, but not losing requests that happen between disabling and * enabling. This is done with the MFP mask registers. */ diff --git a/arch/m68k/include/asm/atarikb.h b/arch/m68k/include/asm/atarikb.h index 546e7da..68f3622 100644 --- a/arch/m68k/include/asm/atarikb.h +++ b/arch/m68k/include/asm/atarikb.h @@ -34,8 +34,6 @@ void ikbd_joystick_disable(void); /* Hook for MIDI serial driver */ extern void (*atari_MIDI_interrupt_hook) (void); -/* Hook for mouse driver */ -extern void (*atari_mouse_interrupt_hook) (char *); /* Hook for keyboard inputdev driver */ extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char); /* Hook for mouse inputdev driver */ diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h index 9d69f6e..e9020f8 100644 --- a/arch/m68k/include/asm/bitops_mm.h +++ b/arch/m68k/include/asm/bitops_mm.h @@ -181,14 +181,15 @@ static inline int find_first_zero_bit(const unsigned long *vaddr, { const unsigned long *p = vaddr; int res = 32; + unsigned int words; unsigned long num; if (!size) return 0; - size = (size + 31) >> 5; + words = (size + 31) >> 5; while (!(num = ~*p++)) { - if (!--size) + if (!--words) goto out; } @@ -196,7 +197,8 @@ static inline int find_first_zero_bit(const unsigned long *vaddr, : "=d" (res) : "d" (num & -num)); res ^= 31; out: - return ((long)p - (long)vaddr - 4) * 8 + res; + res += ((long)p - (long)vaddr - 4) * 8; + return res < size ? res : size; } static inline int find_next_zero_bit(const unsigned long *vaddr, int size, @@ -215,27 +217,32 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size, /* Look for zero in first longword */ __asm__ __volatile__ ("bfffo %1{#0,#0},%0" : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); + if (res < 32) { + offset += res ^ 31; + return offset < size ? offset : size; + } offset += 32; + + if (offset >= size) + return size; } /* No zero yet, search remaining full bytes for a zero */ - res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; + return offset + find_first_zero_bit(p, size - offset); } static inline int find_first_bit(const unsigned long *vaddr, unsigned size) { const unsigned long *p = vaddr; int res = 32; + unsigned int words; unsigned long num; if (!size) return 0; - size = (size + 31) >> 5; + words = (size + 31) >> 5; while (!(num = *p++)) { - if (!--size) + if (!--words) goto out; } @@ -243,7 +250,8 @@ static inline int find_first_bit(const unsigned long *vaddr, unsigned size) : "=d" (res) : "d" (num & -num)); res ^= 31; out: - return ((long)p - (long)vaddr - 4) * 8 + res; + res += ((long)p - (long)vaddr - 4) * 8; + return res < size ? res : size; } static inline int find_next_bit(const unsigned long *vaddr, int size, @@ -262,13 +270,17 @@ static inline int find_next_bit(const unsigned long *vaddr, int size, /* Look for one in first longword */ __asm__ __volatile__ ("bfffo %1{#0,#0},%0" : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); + if (res < 32) { + offset += res ^ 31; + return offset < size ? offset : size; + } offset += 32; + + if (offset >= size) + return size; } /* No one yet, search remaining full bytes for a one */ - res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; + return offset + find_first_bit(p, size - offset); } /* @@ -366,23 +378,25 @@ static inline int test_bit_le(int nr, const void *vaddr) static inline int find_first_zero_bit_le(const void *vaddr, unsigned size) { const unsigned long *p = vaddr, *addr = vaddr; - int res; + int res = 0; + unsigned int words; if (!size) return 0; - size = (size >> 5) + ((size & 31) > 0); - while (*p++ == ~0UL) - { - if (--size == 0) - return (p - addr) << 5; + words = (size >> 5) + ((size & 31) > 0); + while (*p++ == ~0UL) { + if (--words == 0) + goto out; } --p; for (res = 0; res < 32; res++) if (!test_bit_le(res, p)) break; - return (p - addr) * 32 + res; +out: + res += (p - addr) * 32; + return res < size ? res : size; } static inline unsigned long find_next_zero_bit_le(const void *addr, @@ -400,10 +414,15 @@ static inline unsigned long find_next_zero_bit_le(const void *addr, offset -= bit; /* Look for zero in first longword */ for (res = bit; res < 32; res++) - if (!test_bit_le(res, p)) - return offset + res; + if (!test_bit_le(res, p)) { + offset += res; + return offset < size ? offset : size; + } p++; offset += 32; + + if (offset >= size) + return size; } /* No zero yet, search remaining full bytes for a zero */ return offset + find_first_zero_bit_le(p, size - offset); @@ -412,22 +431,25 @@ static inline unsigned long find_next_zero_bit_le(const void *addr, static inline int find_first_bit_le(const void *vaddr, unsigned size) { const unsigned long *p = vaddr, *addr = vaddr; - int res; + int res = 0; + unsigned int words; if (!size) return 0; - size = (size >> 5) + ((size & 31) > 0); + words = (size >> 5) + ((size & 31) > 0); while (*p++ == 0UL) { - if (--size == 0) - return (p - addr) << 5; + if (--words == 0) + goto out; } --p; for (res = 0; res < 32; res++) if (test_bit_le(res, p)) break; - return (p - addr) * 32 + res; +out: + res += (p - addr) * 32; + return res < size ? res : size; } static inline unsigned long find_next_bit_le(const void *addr, @@ -445,10 +467,15 @@ static inline unsigned long find_next_bit_le(const void *addr, offset -= bit; /* Look for one in first longword */ for (res = bit; res < 32; res++) - if (test_bit_le(res, p)) - return offset + res; + if (test_bit_le(res, p)) { + offset += res; + return offset < size ? offset : size; + } p++; offset += 32; + + if (offset >= size) + return size; } /* No set bit yet, search remaining full bytes for a set bit */ return offset + find_first_bit_le(p, size - offset); diff --git a/arch/m68k/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h index bdc1a4a..e518f5a 100644 --- a/arch/m68k/include/asm/bootstd.h +++ b/arch/m68k/include/asm/bootstd.h @@ -31,7 +31,7 @@ #define __BN_flash_write_range 20 /* Calling conventions compatible to (uC)linux/68k - * We use simmilar macros to call into the bootloader as for uClinux + * We use similar macros to call into the bootloader as for uClinux */ #define __bsc_return(type, res) \ diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h index edf5eb6..a739985 100644 --- a/arch/m68k/include/asm/commproc.h +++ b/arch/m68k/include/asm/commproc.h @@ -88,7 +88,7 @@ typedef struct cpm_buf_desc { /* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ @@ -96,7 +96,7 @@ typedef struct cpm_buf_desc { #define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ #define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ +#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ #define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ #define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h index 55cbd62..c3a0edc 100644 --- a/arch/m68k/include/asm/delay_no.h +++ b/arch/m68k/include/asm/delay_no.h @@ -16,7 +16,7 @@ static inline void __delay(unsigned long loops) * long word alignment which is the faster version. * The 0x4a8e is of course a 'tstl %fp' instruction. This is better * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitary delay waiting + * cycle not three and doesn't allow for an arbitrary delay waiting * for bus cycles to finish. Also fp/a6 isn't likely to cause a * stall waiting for the register to become valid if such is added * to the coldfire at some stage. diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index c64c7b7..b204683 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -31,7 +31,7 @@ * GPIOs in a single control area, others have some GPIOs implemented in * different modules. * - * This implementation attempts accomodate the differences while presenting + * This implementation attempts accommodate the differences while presenting * a generic interface that will optimize to as few instructions as possible. */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 55d5a4c5..b6bf2c5 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -157,7 +157,7 @@ #define MCFFEC_SIZE 0x800 /* Register set size */ /* - * Reset Controll Unit. + * Reset Control Unit. */ #define MCF_RCR 0xFC0A0000 #define MCF_RSR 0xFC0A0001 diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 8996df6..6235921 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -48,7 +48,7 @@ #define MCFSIM_DMR1 (MCF_IPSBAR + 0x54) /* Address mask 1 */ /* - * Reset Controll Unit (relative to IPSBAR). + * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR 0x110000 #define MCF_RSR 0x110001 diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 74855a6..758810e 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -283,7 +283,7 @@ #endif /* - * Reset Controll Unit (relative to IPSBAR). + * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR 0x110000 #define MCF_RSR 0x110001 diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 4c94c01..8f8609f 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -29,7 +29,7 @@ #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 762c58c..51e00b0 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -29,7 +29,7 @@ #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ +#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h index 6d40f4d..59414cc 100644 --- a/arch/m68k/include/asm/m68360_quicc.h +++ b/arch/m68k/include/asm/m68360_quicc.h @@ -32,7 +32,7 @@ struct user_data { /* BASE + 0x000: user data memory */ volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ + volatile unsigned char ucode_ext[0x100]; /*Ucode Extension ram */ volatile unsigned char RESERVED1[0x500]; /* Reserved area */ }; #else diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h index 7221f72..3cf2b6e 100644 --- a/arch/m68k/include/asm/mac_oss.h +++ b/arch/m68k/include/asm/mac_oss.h @@ -61,7 +61,7 @@ /* * OSS Interrupt levels for various sub-systems * - * This mapping is layed out with two things in mind: first, we try to keep + * This mapping is laid out with two things in mind: first, we try to keep * things on their own levels to avoid having to do double-dispatches. Second, * the levels match as closely as possible the alternate IRQ mapping mode (aka * "A/UX mode") available on some VIA machines. diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h index 39afb43..a59665e 100644 --- a/arch/m68k/include/asm/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h @@ -204,7 +204,7 @@ #define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ #define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ #define vSR 0x1400 /* [VIA only] Shift register. */ -#define vACR 0x1600 /* [VIA only] Auxilary control register. */ +#define vACR 0x1600 /* [VIA only] Auxiliary control register. */ #define vPCR 0x1800 /* [VIA only] Peripheral control register. */ /* CHRP sez never ever to *write* this. * Mac family says never to *change* this. diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index 50db359..c2a1c5e 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -14,7 +14,7 @@ extern void mac_init_IRQ(void); extern int mac_irq_pending(unsigned int); /* - * Floppy driver magic hook - probably shouldnt be here + * Floppy driver magic hook - probably shouldn't be here */ extern void via1_set_head(int); diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index 92b276f..351c272 100644 --- a/arch/m68k/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h @@ -27,7 +27,7 @@ /* * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. + * Register bit flags are common across ColdFires. */ #define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ #define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 26d851d..f3b649d 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -22,7 +22,7 @@ #define __NR_mknod 14 #define __NR_chmod 15 #define __NR_chown 16 -#define __NR_break 17 +/*#define __NR_break 17*/ #define __NR_oldstat 18 #define __NR_lseek 19 #define __NR_getpid 20 @@ -36,11 +36,11 @@ #define __NR_oldfstat 28 #define __NR_pause 29 #define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 +/*#define __NR_stty 31*/ +/*#define __NR_gtty 32*/ #define __NR_access 33 #define __NR_nice 34 -#define __NR_ftime 35 +/*#define __NR_ftime 35*/ #define __NR_sync 36 #define __NR_kill 37 #define __NR_rename 38 @@ -49,7 +49,7 @@ #define __NR_dup 41 #define __NR_pipe 42 #define __NR_times 43 -#define __NR_prof 44 +/*#define __NR_prof 44*/ #define __NR_brk 45 #define __NR_setgid 46 #define __NR_getgid 47 @@ -58,13 +58,13 @@ #define __NR_getegid 50 #define __NR_acct 51 #define __NR_umount2 52 -#define __NR_lock 53 +/*#define __NR_lock 53*/ #define __NR_ioctl 54 #define __NR_fcntl 55 -#define __NR_mpx 56 +/*#define __NR_mpx 56*/ #define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 +/*#define __NR_ulimit 58*/ +/*#define __NR_oldolduname 59*/ #define __NR_umask 60 #define __NR_chroot 61 #define __NR_ustat 62 @@ -103,10 +103,10 @@ #define __NR_fchown 95 #define __NR_getpriority 96 #define __NR_setpriority 97 -#define __NR_profil 98 +/*#define __NR_profil 98*/ #define __NR_statfs 99 #define __NR_fstatfs 100 -#define __NR_ioperm 101 +/*#define __NR_ioperm 101*/ #define __NR_socketcall 102 #define __NR_syslog 103 #define __NR_setitimer 104 @@ -114,11 +114,11 @@ #define __NR_stat 106 #define __NR_lstat 107 #define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported +/*#define __NR_olduname 109*/ +/*#define __NR_iopl 110*/ /* not supported */ #define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported +/*#define __NR_idle 112*/ /* Obsolete */ +/*#define __NR_vm86 113*/ /* not supported */ #define __NR_wait4 114 #define __NR_swapoff 115 #define __NR_sysinfo 116 @@ -132,17 +132,17 @@ #define __NR_adjtimex 124 #define __NR_mprotect 125 #define __NR_sigprocmask 126 -#define __NR_create_module 127 +/*#define __NR_create_module 127*/ #define __NR_init_module 128 #define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 +/*#define __NR_get_kernel_syms 130*/ #define __NR_quotactl 131 #define __NR_getpgid 132 #define __NR_fchdir 133 #define __NR_bdflush 134 #define __NR_sysfs 135 #define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */ #define __NR_setfsuid 138 #define __NR_setfsgid 139 #define __NR__llseek 140 @@ -172,7 +172,7 @@ #define __NR_setresuid 164 #define __NR_getresuid 165 #define __NR_getpagesize 166 -#define __NR_query_module 167 +/*#define __NR_query_module 167*/ #define __NR_poll 168 #define __NR_nfsservctl 169 #define __NR_setresgid 170 @@ -193,8 +193,8 @@ #define __NR_capset 185 #define __NR_sigaltstack 186 #define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ +/*#define __NR_getpmsg 188*/ /* some people actually want streams */ +/*#define __NR_putpmsg 189*/ /* some people actually want streams */ #define __NR_vfork 190 #define __NR_ugetrlimit 191 #define __NR_mmap2 192 @@ -223,6 +223,8 @@ #define __NR_setfsuid32 215 #define __NR_setfsgid32 216 #define __NR_pivot_root 217 +/* 218*/ +/* 219*/ #define __NR_getdents64 220 #define __NR_gettid 221 #define __NR_tkill 222 @@ -281,7 +283,7 @@ #define __NR_mq_notify 275 #define __NR_mq_getsetattr 276 #define __NR_waitid 277 -#define __NR_vserver 278 +/*#define __NR_vserver 278*/ #define __NR_add_key 279 #define __NR_request_key 280 #define __NR_keyctl 281 @@ -343,10 +345,14 @@ #define __NR_fanotify_init 337 #define __NR_fanotify_mark 338 #define __NR_prlimit64 339 +#define __NR_name_to_handle_at 340 +#define __NR_open_by_handle_at 341 +#define __NR_clock_adjtime 342 +#define __NR_syncfs 343 #ifdef __KERNEL__ -#define NR_syscalls 340 +#define NR_syscalls 344 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm index 55d5d6b..aced678 100644 --- a/arch/m68k/kernel/Makefile_mm +++ b/arch/m68k/kernel/Makefile_mm @@ -10,7 +10,7 @@ endif extra-y += vmlinux.lds obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \ - sys_m68k.o time.o setup.o m68k_ksyms.o devres.o + sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o devres-y = ../../../kernel/irq/devres.o diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index 1559dea..bd0ec05 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -407,347 +407,3 @@ resume: rts -.data -ALIGN -sys_call_table: - .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_chown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_old_select - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_old_readdir - .long sys_old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm for i386 */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall - .long sys_ni_syscall /* 110 */ /* iopl for i386 */ - .long sys_vhangup - .long sys_ni_syscall /* obsolete idle() syscall */ - .long sys_ni_syscall /* vm86old for i386 */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_cacheflush /* modify_ldt for i386 */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130 - old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_getpagesize - .long sys_ni_syscall /* old sys_query_module */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_lchown16; - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_chown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_lchown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_ni_syscall - .long sys_ni_syscall - .long sys_getdents64 /* 220 */ - .long sys_gettid - .long sys_tkill - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr /* 225 */ - .long sys_getxattr - .long sys_lgetxattr - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr /* 230 */ - .long sys_flistxattr - .long sys_removexattr - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_futex /* 235 */ - .long sys_sendfile64 - .long sys_mincore - .long sys_madvise - .long sys_fcntl64 - .long sys_readahead /* 240 */ - .long sys_io_setup - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel /* 245 */ - .long sys_fadvise64 - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 250 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 255 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 260 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 265 */ - .long sys_utimes - .long sys_fadvise64_64 - .long sys_mbind - .long sys_get_mempolicy - .long sys_set_mempolicy /* 270 */ - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive - .long sys_mq_notify /* 275 */ - .long sys_mq_getsetattr - .long sys_waitid - .long sys_ni_syscall /* for sys_vserver */ - .long sys_add_key - .long sys_request_key /* 280 */ - .long sys_keyctl - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init - .long sys_inotify_add_watch /* 285 */ - .long sys_inotify_rm_watch - .long sys_migrate_pages - .long sys_openat - .long sys_mkdirat - .long sys_mknodat /* 290 */ - .long sys_fchownat - .long sys_futimesat - .long sys_fstatat64 - .long sys_unlinkat - .long sys_renameat /* 295 */ - .long sys_linkat - .long sys_symlinkat - .long sys_readlinkat - .long sys_fchmodat - .long sys_faccessat /* 300 */ - .long sys_ni_syscall /* Reserved for pselect6 */ - .long sys_ni_syscall /* Reserved for ppoll */ - .long sys_unshare - .long sys_set_robust_list - .long sys_get_robust_list /* 305 */ - .long sys_splice - .long sys_sync_file_range - .long sys_tee - .long sys_vmsplice - .long sys_move_pages /* 310 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_kexec_load - .long sys_getcpu - .long sys_epoll_pwait /* 315 */ - .long sys_utimensat - .long sys_signalfd - .long sys_timerfd_create - .long sys_eventfd - .long sys_fallocate /* 320 */ - .long sys_timerfd_settime - .long sys_timerfd_gettime - .long sys_signalfd4 - .long sys_eventfd2 - .long sys_epoll_create1 /* 325 */ - .long sys_dup3 - .long sys_pipe2 - .long sys_inotify_init1 - .long sys_preadv - .long sys_pwritev /* 330 */ - .long sys_rt_tgsigqueueinfo - .long sys_perf_event_open - .long sys_get_thread_area - .long sys_set_thread_area - .long sys_atomic_cmpxchg_32 /* 335 */ - .long sys_atomic_barrier - .long sys_fanotify_init - .long sys_fanotify_mark - .long sys_prlimit64 - diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index ef54128..27622b3 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -134,7 +134,7 @@ * Thanks to a small helping routine enabling the mmu got quite simple * and there is only one way left. mmu_engage makes a complete a new mapping * that only includes the absolute necessary to be able to jump to the final - * postion and to restore the original mapping. + * position and to restore the original mapping. * As this code doesn't need a transparent translation register anymore this * means all registers are free to be used by machines that needs them for * other purposes. @@ -969,7 +969,7 @@ L(mmu_init_amiga): is_not_040_or_060(1f) /* - * 040: Map the 16Meg range physical 0x0 upto logical 0x8000.0000 + * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000 */ mmu_map #0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S /* @@ -982,7 +982,7 @@ L(mmu_init_amiga): 1: /* - * 030: Map the 32Meg range physical 0x0 upto logical 0x8000.0000 + * 030: Map the 32Meg range physical 0x0 up to logical 0x8000.0000 */ mmu_map #0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030 mmu_map_tt #1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030 @@ -1074,7 +1074,7 @@ L(notq40): is_040(1f) /* - * 030: Map the 32Meg range physical 0x0 upto logical 0xf000.0000 + * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000 */ mmu_map #0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030 @@ -1082,7 +1082,7 @@ L(notq40): 1: /* - * 040: Map the 16Meg range physical 0x0 upto logical 0xf000.0000 + * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000 */ mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S @@ -3078,7 +3078,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 /* * If the loader gave us a board type then we can use that to * select an appropriate output routine; otherwise we just use - * the Bug code. If we haev to use the Bug that means the Bug + * the Bug code. If we have to use the Bug that means the Bug * workspace has to be valid, which means the Bug has to use * the SRAM, which is non-standard. */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 79b1ed1..5909e39 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -1,6 +1,4 @@ /* - * linux/arch/m68knommu/kernel/syscalltable.S - * * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com) * * Based on older entry.S files, the following copyrights apply: @@ -9,171 +7,176 @@ * Kenneth Albanowski <kjahds@kjahds.com>, * Copyright (C) 2000 Lineo Inc. (www.lineo.com) * Copyright (C) 1991, 1992 Linus Torvalds + * + * Linux/m68k support by Hamish Macdonald */ #include <linux/sys.h> #include <linux/linkage.h> -#include <asm/unistd.h> -.text +#ifndef CONFIG_MMU +#define sys_mmap2 sys_mmap_pgoff +#endif + +.section .rodata ALIGN ENTRY(sys_call_table) - .long sys_restart_syscall /* 0 - old "setup()" system call */ + .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ .long sys_exit .long sys_fork .long sys_read .long sys_write - .long sys_open /* 5 */ + .long sys_open /* 5 */ .long sys_close .long sys_waitpid .long sys_creat .long sys_link - .long sys_unlink /* 10 */ + .long sys_unlink /* 10 */ .long sys_execve .long sys_chdir .long sys_time .long sys_mknod - .long sys_chmod /* 15 */ + .long sys_chmod /* 15 */ .long sys_chown16 - .long sys_ni_syscall /* old break syscall holder */ + .long sys_ni_syscall /* old break syscall holder */ .long sys_stat .long sys_lseek - .long sys_getpid /* 20 */ + .long sys_getpid /* 20 */ .long sys_mount .long sys_oldumount .long sys_setuid16 .long sys_getuid16 - .long sys_stime /* 25 */ + .long sys_stime /* 25 */ .long sys_ptrace .long sys_alarm .long sys_fstat .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ .long sys_access .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_ni_syscall /* 35 - old ftime syscall holder */ .long sys_sync .long sys_kill .long sys_rename .long sys_mkdir - .long sys_rmdir /* 40 */ + .long sys_rmdir /* 40 */ .long sys_dup .long sys_pipe .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ .long sys_setgid16 .long sys_getgid16 .long sys_signal .long sys_geteuid16 - .long sys_getegid16 /* 50 */ + .long sys_getegid16 /* 50 */ .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* old ulimit syscall holder */ .long sys_ni_syscall - .long sys_umask /* 60 */ + .long sys_umask /* 60 */ .long sys_chroot .long sys_ustat .long sys_dup2 .long sys_getppid - .long sys_getpgrp /* 65 */ + .long sys_getpgrp /* 65 */ .long sys_setsid .long sys_sigaction .long sys_sgetmask .long sys_ssetmask - .long sys_setreuid16 /* 70 */ + .long sys_setreuid16 /* 70 */ .long sys_setregid16 .long sys_sigsuspend .long sys_sigpending .long sys_sethostname - .long sys_setrlimit /* 75 */ + .long sys_setrlimit /* 75 */ .long sys_old_getrlimit .long sys_getrusage .long sys_gettimeofday .long sys_settimeofday - .long sys_getgroups16 /* 80 */ + .long sys_getgroups16 /* 80 */ .long sys_setgroups16 .long sys_old_select .long sys_symlink .long sys_lstat - .long sys_readlink /* 85 */ + .long sys_readlink /* 85 */ .long sys_uselib - .long sys_ni_syscall /* sys_swapon */ + .long sys_swapon .long sys_reboot .long sys_old_readdir - .long sys_old_mmap /* 90 */ + .long sys_old_mmap /* 90 */ .long sys_munmap .long sys_truncate .long sys_ftruncate .long sys_fchmod - .long sys_fchown16 /* 95 */ + .long sys_fchown16 /* 95 */ .long sys_getpriority .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ + .long sys_ni_syscall /* old profil syscall holder */ .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm for i386 */ + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm for i386 */ .long sys_socketcall .long sys_syslog .long sys_setitimer - .long sys_getitimer /* 105 */ + .long sys_getitimer /* 105 */ .long sys_newstat .long sys_newlstat .long sys_newfstat .long sys_ni_syscall - .long sys_ni_syscall /* iopl for i386 */ /* 110 */ + .long sys_ni_syscall /* 110 - iopl for i386 */ .long sys_vhangup - .long sys_ni_syscall /* obsolete idle() syscall */ - .long sys_ni_syscall /* vm86old for i386 */ + .long sys_ni_syscall /* obsolete idle() syscall */ + .long sys_ni_syscall /* vm86old for i386 */ .long sys_wait4 - .long sys_ni_syscall /* 115 */ /* sys_swapoff */ + .long sys_swapoff /* 115 */ .long sys_sysinfo .long sys_ipc .long sys_fsync .long sys_sigreturn - .long sys_clone /* 120 */ + .long sys_clone /* 120 */ .long sys_setdomainname .long sys_newuname - .long sys_cacheflush /* modify_ldt for i386 */ + .long sys_cacheflush /* modify_ldt for i386 */ .long sys_adjtimex - .long sys_ni_syscall /* 125 */ /* sys_mprotect */ + .long sys_mprotect /* 125 */ .long sys_sigprocmask - .long sys_ni_syscall /* old "creat_module" */ + .long sys_ni_syscall /* old "create_module" */ .long sys_init_module .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_ni_syscall /* 130 - old "get_kernel_syms" */ .long sys_quotactl .long sys_getpgid .long sys_fchdir .long sys_bdflush - .long sys_sysfs /* 135 */ + .long sys_sysfs /* 135 */ .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ + .long sys_ni_syscall /* for afs_syscall */ .long sys_setfsuid16 .long sys_setfsgid16 - .long sys_llseek /* 140 */ + .long sys_llseek /* 140 */ .long sys_getdents .long sys_select .long sys_flock - .long sys_ni_syscall /* sys_msync */ - .long sys_readv /* 145 */ + .long sys_msync + .long sys_readv /* 145 */ .long sys_writev .long sys_getsid .long sys_fdatasync .long sys_sysctl - .long sys_ni_syscall /* 150 */ /* sys_mlock */ - .long sys_ni_syscall /* sys_munlock */ - .long sys_ni_syscall /* sys_mlockall */ - .long sys_ni_syscall /* sys_munlockall */ + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ + .long sys_sched_getparam /* 155 */ .long sys_sched_setscheduler .long sys_sched_getscheduler .long sys_sched_yield @@ -181,124 +184,124 @@ ENTRY(sys_call_table) .long sys_sched_get_priority_min /* 160 */ .long sys_sched_rr_get_interval .long sys_nanosleep - .long sys_ni_syscall /* sys_mremap */ + .long sys_mremap .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_getpagesize /* sys_getpagesize */ - .long sys_ni_syscall /* old "query_module" */ + .long sys_getresuid16 /* 165 */ + .long sys_getpagesize + .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_ni_syscall /* sys_nfsservctl */ - .long sys_setresgid16 /* 170 */ + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl .long sys_rt_sigreturn .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigprocmask /* 175 */ .long sys_rt_sigpending .long sys_rt_sigtimedwait .long sys_rt_sigqueueinfo .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ + .long sys_pread64 /* 180 */ .long sys_pwrite64 .long sys_lchown16 .long sys_getcwd .long sys_capget - .long sys_capset /* 185 */ + .long sys_capset /* 185 */ .long sys_sigaltstack .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap_pgoff + .long sys_mmap2 .long sys_truncate64 .long sys_ftruncate64 - .long sys_stat64 /* 195 */ + .long sys_stat64 /* 195 */ .long sys_lstat64 .long sys_fstat64 .long sys_chown .long sys_getuid - .long sys_getgid /* 200 */ + .long sys_getgid /* 200 */ .long sys_geteuid .long sys_getegid .long sys_setreuid .long sys_setregid - .long sys_getgroups /* 205 */ + .long sys_getgroups /* 205 */ .long sys_setgroups .long sys_fchown .long sys_setresuid .long sys_getresuid - .long sys_setresgid /* 210 */ + .long sys_setresgid /* 210 */ .long sys_getresgid .long sys_lchown .long sys_setuid .long sys_setgid - .long sys_setfsuid /* 215 */ + .long sys_setfsuid /* 215 */ .long sys_setfsgid .long sys_pivot_root .long sys_ni_syscall .long sys_ni_syscall - .long sys_getdents64 /* 220 */ + .long sys_getdents64 /* 220 */ .long sys_gettid .long sys_tkill .long sys_setxattr .long sys_lsetxattr - .long sys_fsetxattr /* 225 */ + .long sys_fsetxattr /* 225 */ .long sys_getxattr .long sys_lgetxattr .long sys_fgetxattr .long sys_listxattr - .long sys_llistxattr /* 230 */ + .long sys_llistxattr /* 230 */ .long sys_flistxattr .long sys_removexattr .long sys_lremovexattr .long sys_fremovexattr - .long sys_futex /* 235 */ + .long sys_futex /* 235 */ .long sys_sendfile64 - .long sys_ni_syscall /* sys_mincore */ - .long sys_ni_syscall /* sys_madvise */ + .long sys_mincore + .long sys_madvise .long sys_fcntl64 - .long sys_readahead /* 240 */ + .long sys_readahead /* 240 */ .long sys_io_setup .long sys_io_destroy .long sys_io_getevents .long sys_io_submit - .long sys_io_cancel /* 245 */ + .long sys_io_cancel /* 245 */ .long sys_fadvise64 .long sys_exit_group .long sys_lookup_dcookie .long sys_epoll_create - .long sys_epoll_ctl /* 250 */ + .long sys_epoll_ctl /* 250 */ .long sys_epoll_wait - .long sys_ni_syscall /* sys_remap_file_pages */ + .long sys_remap_file_pages .long sys_set_tid_address .long sys_timer_create - .long sys_timer_settime /* 255 */ + .long sys_timer_settime /* 255 */ .long sys_timer_gettime .long sys_timer_getoverrun .long sys_timer_delete .long sys_clock_settime - .long sys_clock_gettime /* 260 */ + .long sys_clock_gettime /* 260 */ .long sys_clock_getres .long sys_clock_nanosleep .long sys_statfs64 .long sys_fstatfs64 - .long sys_tgkill /* 265 */ + .long sys_tgkill /* 265 */ .long sys_utimes .long sys_fadvise64_64 - .long sys_mbind + .long sys_mbind .long sys_get_mempolicy - .long sys_set_mempolicy /* 270 */ + .long sys_set_mempolicy /* 270 */ .long sys_mq_open .long sys_mq_unlink .long sys_mq_timedsend .long sys_mq_timedreceive - .long sys_mq_notify /* 275 */ + .long sys_mq_notify /* 275 */ .long sys_mq_getsetattr .long sys_waitid - .long sys_ni_syscall /* for sys_vserver */ + .long sys_ni_syscall /* for sys_vserver */ .long sys_add_key - .long sys_request_key /* 280 */ + .long sys_request_key /* 280 */ .long sys_keyctl .long sys_ioprio_set .long sys_ioprio_get @@ -319,8 +322,8 @@ ENTRY(sys_call_table) .long sys_readlinkat .long sys_fchmodat .long sys_faccessat /* 300 */ - .long sys_ni_syscall /* Reserved for pselect6 */ - .long sys_ni_syscall /* Reserved for ppoll */ + .long sys_pselect6 + .long sys_ppoll .long sys_unshare .long sys_set_robust_list .long sys_get_robust_list /* 305 */ @@ -358,8 +361,8 @@ ENTRY(sys_call_table) .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 - - .rept NR_syscalls-(.-sys_call_table)/4 - .long sys_ni_syscall - .endr + .long sys_name_to_handle_at /* 340 */ + .long sys_open_by_handle_at + .long sys_clock_adjtime + .long sys_syncfs diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S index 47e15eb..f4d715c 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux.lds_no.S @@ -3,7 +3,7 @@ * * (C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com> * - * This linker script is equiped to build either ROM loaded or RAM + * This linker script is equipped to build either ROM loaded or RAM * run kernels. */ diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 02b7a03..8b3db1c 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -300,6 +300,8 @@ void __init paging_init(void) zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT; free_area_init_node(i, zones_size, m68k_memory[i].addr >> PAGE_SHIFT, NULL); + if (node_present_pages(i)) + node_set_state(i, N_NORMAL_MEMORY); } } diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c index 418a76f..71f4436 100644 --- a/arch/m68k/platform/523x/config.c +++ b/arch/m68k/platform/523x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/523x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 523x CPUs. * * Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/5272/intc.c b/arch/m68k/platform/5272/intc.c index 43e6e96..7e715df 100644 --- a/arch/m68k/platform/5272/intc.c +++ b/arch/m68k/platform/5272/intc.c @@ -33,7 +33,7 @@ * * Note that the external interrupts are edge triggered (unlike the * internal interrupt sources which are level triggered). Which means - * they also need acknowledgeing via acknowledge bits. + * they also need acknowledging via acknowledge bits. */ struct irqmap { unsigned char icr; diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c index fa35959..3ebc769 100644 --- a/arch/m68k/platform/527x/config.c +++ b/arch/m68k/platform/527x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/527x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 5270/5271 CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c index ac39fc6..7abe77a 100644 --- a/arch/m68k/platform/528x/config.c +++ b/arch/m68k/platform/528x/config.c @@ -3,7 +3,7 @@ /* * linux/arch/m68knommu/platform/528x/config.c * - * Sub-architcture dependant initialization code for the Freescale + * Sub-architcture dependent initialization code for the Freescale * 5280, 5281 and 5282 CPUs. * * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) diff --git a/arch/m68k/platform/coldfire/cache.c b/arch/m68k/platform/coldfire/cache.c index 235d3c4..71beeaf 100644 --- a/arch/m68k/platform/coldfire/cache.c +++ b/arch/m68k/platform/coldfire/cache.c @@ -1,7 +1,7 @@ /***************************************************************************/ /* - * cache.c -- general ColdFire Cache maintainence code + * cache.c -- general ColdFire Cache maintenance code * * Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com) */ diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 5837cf0..eab63f0 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -163,7 +163,7 @@ Lsignal_return: /* * This is the generic interrupt handler (for all hardware interrupt - * sources). Calls upto high level code to do all the work. + * sources). Calls up to high level code to do all the work. */ ENTRY(inthandler) SAVE_ALL diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 129bff49..6ae91a4 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -20,7 +20,7 @@ /* * If we don't have a fixed memory size, then lets build in code - * to auto detect the DRAM size. Obviously this is the prefered + * to auto detect the DRAM size. Obviously this is the preferred * method, and should work for most boards. It won't work for those * that do not have their RAM starting at address 0, and it only * works on SDRAM (not boards fitted with SRAM). diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c index c28a6ed..0bbb414 100644 --- a/arch/m68k/platform/coldfire/intc.c +++ b/arch/m68k/platform/coldfire/intc.c @@ -37,7 +37,7 @@ unsigned char mcf_irq2imr[NR_IRQS]; /* * In the early version 2 core ColdFire parts the IMR register was 16 bits * in size. Version 3 (and later version 2) core parts have a 32 bit - * sized IMR register. Provide some size independant methods to access the + * sized IMR register. Provide some size independent methods to access the * IMR register. */ #ifdef MCFSIM_IMR_IS_16BITS diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c index 0a1b937..6a85daf 100644 --- a/arch/m68k/platform/coldfire/sltimers.c +++ b/arch/m68k/platform/coldfire/sltimers.c @@ -106,7 +106,7 @@ static cycle_t mcfslt_read_clk(struct clocksource *cs) cycles = mcfslt_cnt; local_irq_restore(flags); - /* substract because slice timers count down */ + /* subtract because slice timers count down */ return cycles - scnt; } diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index f877b72..b26d5f5 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -89,7 +89,7 @@ The main interrupt register IIRQ_REG will indicate whether an IRQ was internal or from some ISA devices, EIRQ_REG can distinguish up to 8 ISA IRQs. The Q40 custom chip is programmable to provide 2 periodic timers: - - 50 or 200 Hz - level 2, !!THIS CANT BE DISABLED!! + - 50 or 200 Hz - level 2, !!THIS CAN'T BE DISABLED!! - 10 or 20 KHz - level 4, used for dma-sound Linux uses the 200 Hz interrupt for timer and beep by default. diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 851b3bf..eccdefe 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,7 +6,6 @@ config MICROBLAZE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD - select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE select HAVE_ARCH_KGDB diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 6f432e6..b23c40e 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # rather than bools y/n # Work out HW multipler support. This is tricky. -# 1. Spartan2 has no HW multiplers. +# 1. Spartan2 has no HW multipliers. # 2. MicroBlaze v3.x always uses them, except in Spartan 2 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index eae3222..8cdac14 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) /* * read (readb, readw, readl, readq) and write (writeb, writew, - * writel, writeq) accessors are for PCI and thus littel endian. + * writel, writeq) accessors are for PCI and thus little endian. * Linux 2.4 for Microblaze had this wrong. */ static inline unsigned char readb(const volatile void __iomem *addr) diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 1071766..746df91 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -76,7 +76,7 @@ struct pci_controller { * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS * to determine which bus number to match on when generating type0 * config cycles diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 2232ff94..ba65cf4 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); -/* This part of code was originaly in xilinx-pci.h */ +/* This part of code was originally in xilinx-pci.h */ #ifdef CONFIG_PCI_XILINX extern void __init xilinx_pci_init(void); #else diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index cf0afd9..4b7d8a3 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -129,7 +129,7 @@ do { \ * to use for simple wdc or wic. * * start address is cache aligned - * end address is not aligned, if end is aligned then I have to substract + * end address is not aligned, if end is aligned then I have to subtract * cacheline length because I can't flush/invalidate the next cacheline. * If is not, I align it because I will flush/invalidate whole line. */ diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index d8a214f..e5550ce 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -217,16 +217,12 @@ static struct clocksource clocksource_microblaze = { .rating = 300, .read = microblaze_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 8, /* I can shift it */ .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init microblaze_clocksource_init(void) { - clocksource_microblaze.mult = - clocksource_hz2mult(timer_clock_freq, - clocksource_microblaze.shift); - if (clocksource_register(&clocksource_microblaze)) + if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq)) panic("failed to register clocksource"); /* stop timer1 */ diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc495d7..52746e7 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) if (likely(c >= 4)) { unsigned value, buf_hold; - /* Align the dstination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */ switch ((unsigned long)dst & 3) { case 1: *dst++ = *src++; @@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) i_dst = (void *)dst; /* Choose a copy scheme based on the source */ - /* alignment relative to dstination. */ + /* alignment relative to destination. */ switch ((unsigned long)src & 3) { case 0x0: /* Both byte offsets are aligned */ i_src = (const void *)src; @@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) } /* Finish off any remaining bytes */ - /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ switch (c) { case 3: *dst++ = *src++; diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index 810fd68..2146c37 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) if (c >= 4) { unsigned value, buf_hold; - /* Align the destination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */ switch ((unsigned long)dst & 3) { case 3: @@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) dst = (void *)i_dst; } - /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ /* Finish off any remaining bytes */ switch (c) { case 4: diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 834565d..ddf6793 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n) if (likely(n >= 4)) { /* Align the destination to a word boundary */ - /* This is done in an endian independant manner */ + /* This is done in an endian independent manner */ switch ((unsigned) src & 3) { case 1: *src++ = c; diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c index 25f18f0..4196eb6 100644 --- a/arch/microblaze/pci/indirect_pci.c +++ b/arch/microblaze/pci/indirect_pci.c @@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | (devfn << 8) | reg | cfg_type)); - /* surpress setting of PCI_PRIMARY_BUS */ + /* suppress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) if ((offset == PCI_PRIMARY_BUS) && (bus->number == hose->first_busno)) diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto index 5d86fc1..25a6f01 100644 --- a/arch/microblaze/platform/generic/Kconfig.auto +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR BASE Address for kernel config XILINX_MICROBLAZE0_FAMILY - string "Targetted FPGA family" + string "Targeted FPGA family" default "virtex5" config XILINX_MICROBLAZE0_USE_MSR_INSTR diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 7ff9b54..aef6c91 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -11,6 +11,7 @@ platforms += dec platforms += emma platforms += jazz platforms += jz4740 +platforms += lantiq platforms += lasat platforms += loongson platforms += mipssim diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 83aa5fb..cef1a85 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -212,6 +212,24 @@ config MACH_JZ4740 select HAVE_PWM select HAVE_CLK +config LANTIQ + bool "Lantiq based platforms" + select DMA_NONCOHERENT + select IRQ_CPU + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_MULTITHREADING + select SYS_HAS_EARLY_PRINTK + select ARCH_REQUIRE_GPIOLIB + select SWAP_IO_SPACE + select BOOT_RAW + select HAVE_CLK + select MIPS_MACHINE + config LASAT bool "LASAT Networks platforms" select CEVT_R4K @@ -736,6 +754,33 @@ config CAVIUM_OCTEON_REFERENCE_BOARD Hikari Say Y here for most Octeon reference boards. +config NLM_XLR_BOARD + bool "Netlogic XLR/XLS based systems" + depends on EXPERIMENTAL + select BOOT_ELF32 + select NLM_COMMON + select NLM_XLR + select SYS_HAS_CPU_XLR + select SYS_SUPPORTS_SMP + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select 64BIT_PHYS_ADDR + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select DMA_COHERENT + select NR_CPUS_DEFAULT_32 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select ZONE_DMA if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK + help + Support for systems based on Netlogic XLR and XLS processors. + Say Y here if you have a XLR or XLS based board. + endchoice source "arch/mips/alchemy/Kconfig" @@ -743,6 +788,7 @@ source "arch/mips/ath79/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" +source "arch/mips/lantiq/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/powertv/Kconfig" @@ -752,6 +798,7 @@ source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" source "arch/mips/loongson/Kconfig" +source "arch/mips/netlogic/Kconfig" endmenu @@ -997,9 +1044,6 @@ config IRQ_GT641XX config IRQ_GIC bool -config IRQ_CPU_OCTEON - bool - config MIPS_BOARDS_GEN bool @@ -1135,7 +1179,7 @@ config CPU_LOONGSON2E The Loongson 2E processor implements the MIPS III instruction set with many extensions. - It has an internal FPGA northbridge, which is compatiable to + It has an internal FPGA northbridge, which is compatible to bonito64. config CPU_LOONGSON2F @@ -1359,8 +1403,6 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" depends on SYS_HAS_CPU_CAVIUM_OCTEON - select IRQ_CPU - select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_SMP @@ -1425,6 +1467,17 @@ config CPU_BMIPS5000 help Broadcom BMIPS5000 processors. +config CPU_XLR + bool "Netlogic XLR SoC" + depends on SYS_HAS_CPU_XLR + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + select CPU_SUPPORTS_HUGEPAGES + help + Netlogic Microsystems XLR/XLS processors. endchoice if CPU_LOONGSON2F @@ -1555,6 +1608,9 @@ config SYS_HAS_CPU_BMIPS4380 config SYS_HAS_CPU_BMIPS5000 bool +config SYS_HAS_CPU_XLR + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -2339,6 +2395,7 @@ config MMU config I8253 bool + select CLKSRC_I8253 select MIPS_EXTERNAL_TIMER config ZONE_DMA32 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ac1d5b6..884819c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -101,7 +101,7 @@ cflags-y += -ffreestanding # carefully avoid to add it redundantly because gcc 3.3/3.4 complains # when fed the toolchain default! # -# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of +# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of # 2006-10-10 don't properly change the predefined symbols if -EB / -EL # are used, so we kludge that here. A bug has been filed at # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. @@ -191,6 +191,18 @@ endif # include $(srctree)/arch/mips/Kbuild.platforms +# +# NETLOGIC SOC Common (common) +# +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic + +# +# NETLOGIC XLR/XLS SoC, Simulator and boards +# +core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/ +load-$(CONFIG_NLM_XLR_BOARD) += 0xffffffff84000000 + cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ @@ -314,5 +326,5 @@ define archhelp echo ' vmlinuz.bin - Raw binary zboot image' echo ' vmlinuz.srec - SREC zboot image' echo - echo ' These will be default as apropriate for a configured platform.' + echo ' These will be default as appropriate for a configured platform.' endef diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c index af0fe41..f38298a 100644 --- a/arch/mips/alchemy/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c @@ -75,7 +75,7 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base) * counter, if it exists. If we don't have an accurate processor * speed, all of the peripherals that derive their clocks based on * this advertised speed will introduce error and sometimes not work - * properly. This function is futher convoluted to still allow configurations + * properly. This function is further convoluted to still allow configurations * to do that in case they have really, really old silicon with a * write-only PLL register. -- Dan */ diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index ca0506a..3a5abb5 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -36,7 +36,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); /* I couldn't find a macro that did this... */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) -static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static dbdma_global_t *dbdma_gptr = + (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); static int dbdma_initialized; static dbdev_tab_t dbdev_tab[] = { @@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, if (ctp != NULL) { memset(ctp, 0, sizeof(chan_tab_t)); ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; + dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); dcp += (0x0100 * chan); ctp->chan_ptr = (au1x_dma_chan_t *)dcp; cp = (au1x_dma_chan_t *)dcp; @@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) } -struct alchemy_dbdma_sysdev { - struct sys_device sysdev; - u32 pm_regs[NUM_DBDMA_CHANS + 1][6]; -}; +static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6]; -static int alchemy_dbdma_suspend(struct sys_device *dev, - pm_message_t state) +static int alchemy_dbdma_suspend(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - sdev->pm_regs[0][0] = au_readl(addr + 0x00); - sdev->pm_regs[0][1] = au_readl(addr + 0x04); - sdev->pm_regs[0][2] = au_readl(addr + 0x08); - sdev->pm_regs[0][3] = au_readl(addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c); /* save channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - sdev->pm_regs[i][0] = au_readl(addr + 0x00); - sdev->pm_regs[i][1] = au_readl(addr + 0x04); - sdev->pm_regs[i][2] = au_readl(addr + 0x08); - sdev->pm_regs[i][3] = au_readl(addr + 0x0c); - sdev->pm_regs[i][4] = au_readl(addr + 0x10); - sdev->pm_regs[i][5] = au_readl(addr + 0x14); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c); + alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10); + alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14); /* halt channel */ - au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00); - au_sync(); - while (!(au_readl(addr + 0x14) & 1)) - au_sync(); + __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00); + wmb(); + while (!(__raw_readl(addr + 0x14) & 1)) + wmb(); addr += 0x100; /* next channel base */ } /* disable channel interrupts */ - au_writel(0, DDMA_GLOBAL_BASE + 0x0c); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(0, addr + 0x0c); + wmb(); return 0; } -static int alchemy_dbdma_resume(struct sys_device *dev) +static void alchemy_dbdma_resume(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - au_writel(sdev->pm_regs[0][0], addr + 0x00); - au_writel(sdev->pm_regs[0][1], addr + 0x04); - au_writel(sdev->pm_regs[0][2], addr + 0x08); - au_writel(sdev->pm_regs[0][3], addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c); /* restore channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - au_writel(sdev->pm_regs[i][0], addr + 0x00); - au_writel(sdev->pm_regs[i][1], addr + 0x04); - au_writel(sdev->pm_regs[i][2], addr + 0x08); - au_writel(sdev->pm_regs[i][3], addr + 0x0c); - au_writel(sdev->pm_regs[i][4], addr + 0x10); - au_writel(sdev->pm_regs[i][5], addr + 0x14); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c); + __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10); + __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14); + wmb(); addr += 0x100; /* next channel base */ } - - return 0; } -static struct sysdev_class alchemy_dbdma_sysdev_class = { - .name = "dbdma", +static struct syscore_ops alchemy_dbdma_syscore_ops = { .suspend = alchemy_dbdma_suspend, .resume = alchemy_dbdma_resume, }; -static int __init alchemy_dbdma_sysdev_init(void) -{ - struct alchemy_dbdma_sysdev *sdev; - int ret; - - ret = sysdev_class_register(&alchemy_dbdma_sysdev_class); - if (ret) - return ret; - - sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL); - if (!sdev) - return -ENOMEM; - - sdev->sysdev.id = -1; - sdev->sysdev.cls = &alchemy_dbdma_sysdev_class; - ret = sysdev_register(&sdev->sysdev); - if (ret) - kfree(sdev); - - return ret; -} - static int __init au1xxx_dbdma_init(void) { int irq_nr, ret; @@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void) else { dbdma_initialized = 1; printk(KERN_INFO "Alchemy DBDMA initialized\n"); - ret = alchemy_dbdma_sysdev_init(); - if (ret) { - printk(KERN_ERR "DBDMA PM init failed\n"); - ret = 0; - } + register_syscore_ops(&alchemy_dbdma_syscore_ops); } return ret; diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d527887..347980e 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -58,6 +58,9 @@ * returned from request_dma. */ +/* DMA Channel register block spacing */ +#define DMA_CHANNEL_LEN 0x00000100 + DEFINE_SPINLOCK(au1000_dma_spin_lock); struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { @@ -77,22 +80,23 @@ static const struct dma_dev { unsigned int fifo_addr; unsigned int dma_mode; } dma_dev_table[DMA_NUM_DEV] = { - {UART0_ADDR + UART_TX, 0}, - {UART0_ADDR + UART_RX, 0}, - {0, 0}, - {0, 0}, - {AC97C_DATA, DMA_DW16 }, /* coherent */ - {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ - {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, - {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0WR, DMA_DW8 | DMA_NC}, - {USBD_EP2WR, DMA_DW8 | DMA_NC}, - {USBD_EP3WR, DMA_DW8 | DMA_NC}, - {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, - {I2S_DATA, DMA_DW32 | DMA_NC}, - {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} + { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */ + { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */ + { 0, 0 }, /* DMA_REQ0 */ + { 0, 0 }, /* DMA_REQ1 */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ + { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ + { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ + { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ }; int au1000_dma_read_proc(char *buf, char **start, off_t fpos, @@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, /* Device FIFO addresses and default DMA modes - 2nd bank */ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ - { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */ }; void dump_au1000_dma_channel(unsigned int dmanr) @@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, } /* fill it in */ - chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN; chan->dev_id = dev_id; chan->dev_str = dev_str; chan->fifo_addr = dev->fifo_addr; diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 55dd7c8..8b60ba0 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -30,7 +30,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -39,6 +39,36 @@ #include <asm/mach-pb1x00/pb1000.h> #endif +/* Interrupt Controller register offsets */ +#define IC_CFG0RD 0x40 +#define IC_CFG0SET 0x40 +#define IC_CFG0CLR 0x44 +#define IC_CFG1RD 0x48 +#define IC_CFG1SET 0x48 +#define IC_CFG1CLR 0x4C +#define IC_CFG2RD 0x50 +#define IC_CFG2SET 0x50 +#define IC_CFG2CLR 0x54 +#define IC_REQ0INT 0x54 +#define IC_SRCRD 0x58 +#define IC_SRCSET 0x58 +#define IC_SRCCLR 0x5C +#define IC_REQ1INT 0x5C +#define IC_ASSIGNRD 0x60 +#define IC_ASSIGNSET 0x60 +#define IC_ASSIGNCLR 0x64 +#define IC_WAKERD 0x68 +#define IC_WAKESET 0x68 +#define IC_WAKECLR 0x6C +#define IC_MASKRD 0x70 +#define IC_MASKSET 0x70 +#define IC_MASKCLR 0x74 +#define IC_RISINGRD 0x78 +#define IC_RISINGCLR 0x78 +#define IC_FALLINGRD 0x7C +#define IC_FALLINGCLR 0x7C +#define IC_TESTBIT 0x80 + static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); /* NOTE on interrupt priorities: The original writers of this code said: @@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = { static void au1x_ic0_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKSET); - au_writel(1 << bit, IC0_WAKESET); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); } static void au1x_ic1_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKSET); - au_writel(1 << bit, IC1_WAKESET); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); /* very hacky. does the pb1000 cpld auto-disable this int? * nowhere in the current kernel sources is it disabled. --mlau */ #if defined(CONFIG_MIPS_PB1000) if (d->irq == AU1000_GPIO15_INT) - au_writel(0x4000, PB1000_MDR); /* enable int */ + __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */ #endif - au_sync(); + wmb(); } static void au1x_ic0_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic1_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic0_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic1_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC1_FALLINGCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic0_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - au_writel(1 << bit, IC0_WAKECLR); - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static void au1x_ic1_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); - au_writel(1 << bit, IC1_WAKECLR); - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_writel(1 << bit, IC1_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) @@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) return -EINVAL; local_irq_save(flags); - wakemsk = au_readl(SYS_WAKEMSK); + wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); if (on) wakemsk |= 1 << bit; else wakemsk &= ~(1 << bit); - au_writel(wakemsk, SYS_WAKEMSK); - au_sync(); + __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); + wmb(); local_irq_restore(flags); return 0; @@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = { static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) { struct irq_chip *chip; - unsigned long icr[6]; - unsigned int bit, ic, irq = d->irq; + unsigned int bit, irq = d->irq; irq_flow_handler_t handler = NULL; unsigned char *name = NULL; + void __iomem *base; int ret; if (irq >= AU1000_INTC1_INT_BASE) { bit = irq - AU1000_INTC1_INT_BASE; chip = &au1x_ic1_chip; - ic = 1; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq - AU1000_INTC0_INT_BASE; chip = &au1x_ic0_chip; - ic = 0; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } if (bit > 31) return -EINVAL; - icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET; - icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET; - icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET; - icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR; - icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR; - icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR; - ret = 0; switch (flow_type) { /* cfgregs 2:1:0 */ case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "riseedge"; break; case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_edge_irq; name = "falledge"; break; case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "bothedge"; break; case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_level_irq; name = "hilevel"; break; case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_level_irq; name = "lowlevel"; break; case IRQ_TYPE_NONE: /* 0:0:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0CLR); break; default: ret = -EINVAL; } __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); - au_sync(); + wmb(); return ret; } @@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void) off = MIPS_CPU_IRQ_BASE + 7; goto handle; } else if (pending & CAUSEF_IP2) { - s = IC0_REQ0INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP3) { - s = IC0_REQ1INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP4) { - s = IC1_REQ0INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC1_INT_BASE; } else if (pending & CAUSEF_IP5) { - s = IC1_REQ1INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC1_INT_BASE; } else goto spurious; - s = au_readl(s); + s = __raw_readl((void __iomem *)s); if (unlikely(!s)) { spurious: spurious_interrupt(); @@ -469,48 +504,42 @@ handle: do_IRQ(off); } + +static inline void ic_init(void __iomem *base) +{ + /* initialize interrupt controller to a safe state */ + __raw_writel(0xffffffff, base + IC_CFG0CLR); + __raw_writel(0xffffffff, base + IC_CFG1CLR); + __raw_writel(0xffffffff, base + IC_CFG2CLR); + __raw_writel(0xffffffff, base + IC_MASKCLR); + __raw_writel(0xffffffff, base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, base + IC_WAKECLR); + __raw_writel(0xffffffff, base + IC_SRCSET); + __raw_writel(0xffffffff, base + IC_FALLINGCLR); + __raw_writel(0xffffffff, base + IC_RISINGCLR); + __raw_writel(0x00000000, base + IC_TESTBIT); + wmb(); +} + static void __init au1000_init_irq(struct au1xxx_irqmap *map) { unsigned int bit, irq_nr; - int i; - - /* - * Initialize interrupt controllers to a safe state. - */ - au_writel(0xffffffff, IC0_CFG0CLR); - au_writel(0xffffffff, IC0_CFG1CLR); - au_writel(0xffffffff, IC0_CFG2CLR); - au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNCLR); - au_writel(0xffffffff, IC0_WAKECLR); - au_writel(0xffffffff, IC0_SRCSET); - au_writel(0xffffffff, IC0_FALLINGCLR); - au_writel(0xffffffff, IC0_RISINGCLR); - au_writel(0x00000000, IC0_TESTBIT); - - au_writel(0xffffffff, IC1_CFG0CLR); - au_writel(0xffffffff, IC1_CFG1CLR); - au_writel(0xffffffff, IC1_CFG2CLR); - au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNCLR); - au_writel(0xffffffff, IC1_WAKECLR); - au_writel(0xffffffff, IC1_SRCSET); - au_writel(0xffffffff, IC1_FALLINGCLR); - au_writel(0xffffffff, IC1_RISINGCLR); - au_writel(0x00000000, IC1_TESTBIT); + void __iomem *base; + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); mips_cpu_irq_init(); /* register all 64 possible IC0+IC1 irq sources as type "none". * Use set_irq_type() to set edge/level behaviour at runtime. */ - for (i = AU1000_INTC0_INT_BASE; - (i < AU1000_INTC0_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); - for (i = AU1000_INTC1_INT_BASE; - (i < AU1000_INTC1_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); /* * Initialize IC0, which is fixed per processor. @@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map) if (irq_nr >= AU1000_INTC1_INT_BASE) { bit = irq_nr - AU1000_INTC1_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC1_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq_nr - AU1000_INTC0_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC0_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } + if (map->im_request) + __raw_writel(1 << bit, base + IC_ASSIGNSET); au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); ++map; @@ -556,90 +585,62 @@ void __init arch_init_irq(void) } } -struct alchemy_ic_sysdev { - struct sys_device sysdev; - void __iomem *base; - unsigned long pmdata[7]; -}; -static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); +static unsigned long alchemy_ic_pmdata[7 * 2]; - icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD); - icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD); - icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD); - icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD); - icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD); - icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD); - icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD); - - return 0; +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ } -static int alchemy_ic_resume(struct sys_device *dev) +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) { - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); - - __raw_writel(0xffffffff, icdev->base + IC_MASKCLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR); - __raw_writel(0xffffffff, icdev->base + IC_SRCCLR); - __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR); - __raw_writel(0xffffffff, icdev->base + IC_WAKECLR); - __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR); - __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR); - __raw_writel(0x00000000, icdev->base + IC_TESTBIT); - wmb(); - __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET); - __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET); - __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET); - __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET); - __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET); - __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET); + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); wmb(); - __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET); + __raw_writel(d[6], base + IC_MASKSET); wmb(); +} +static int alchemy_ic_suspend(void) +{ + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); return 0; } -static struct sysdev_class alchemy_ic_sysdev_class = { - .name = "ic", +static void alchemy_ic_resume(void) +{ + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); +} + +static struct syscore_ops alchemy_ic_syscore_ops = { .suspend = alchemy_ic_suspend, .resume = alchemy_ic_resume, }; -static int __init alchemy_ic_sysdev_init(void) +static int __init alchemy_ic_pm_init(void) { - struct alchemy_ic_sysdev *icdev; - unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR }; - int err, i; - - err = sysdev_class_register(&alchemy_ic_sysdev_class); - if (err) - return err; - - for (i = 0; i < 2; i++) { - icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL); - if (!icdev) - return -ENOMEM; - - icdev->base = ioremap(icbase[i], 0x1000); - - icdev->sysdev.id = i; - icdev->sysdev.cls = &alchemy_ic_sysdev_class; - err = sysdev_register(&icdev->sysdev); - if (err) { - kfree(icdev); - return err; - } - } - + register_syscore_ops(&alchemy_ic_syscore_ops); return 0; } -device_initcall(alchemy_ic_sysdev_init); +device_initcall(alchemy_ic_pm_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 9e7814d..3b2c18b 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -13,9 +13,10 @@ #include <linux/dma-mapping.h> #include <linux/etherdevice.h> +#include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <linux/init.h> +#include <linux/slab.h> #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -30,21 +31,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, #ifdef CONFIG_SERIAL_8250 switch (state) { case 0: - if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) { - /* power-on sequence as suggested in the databooks */ - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); - __raw_writel(1, port->membase + UART_MOD_CNTRL); - wmb(); - } - __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */ - wmb(); + alchemy_uart_enable(CPHYSADDR(port->membase)); serial8250_do_pm(port, state, old_state); break; case 3: /* power off */ serial8250_do_pm(port, state, old_state); - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); + alchemy_uart_disable(CPHYSADDR(port->membase)); break; default: serial8250_do_pm(port, state, old_state); @@ -65,38 +57,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, .pm = alchemy_8250_pm, \ } -static struct plat_serial8250_port au1x00_uart_data[] = { -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), - PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), - PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), - PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), -#endif - { }, +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, }; static struct platform_device au1xx0_uart_device = { .name = "serial8250", .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_uart_data, - }, }; +static void __init alchemy_setup_uarts(int ctype) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + + ports = kzalloc(s * (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -269,8 +283,8 @@ extern struct au1xmmc_platform_data au1xmmc_platdata[2]; static struct resource au1200_mmc0_resources[] = { [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -305,8 +319,8 @@ static struct platform_device au1200_mmc0_device = { #ifndef CONFIG_MIPS_DB1200 static struct resource au1200_mmc1_resources[] = { [0] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -359,15 +373,16 @@ static struct platform_device pbdb_smbus_device = { #endif /* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */ #define MAC_RES(_base, _enable, _irq) \ { \ - .start = CPHYSADDR(_base), \ - .end = CPHYSADDR(_base + 0xffff), \ + .start = _base, \ + .end = _base + 0xffff, \ .flags = IORESOURCE_MEM, \ }, \ { \ - .start = CPHYSADDR(_enable), \ - .end = CPHYSADDR(_enable + 0x3), \ + .start = _enable, \ + .end = _enable + 0x3, \ .flags = IORESOURCE_MEM, \ }, \ { \ @@ -376,19 +391,29 @@ static struct platform_device pbdb_smbus_device = { .flags = IORESOURCE_IRQ \ } -static struct resource au1xxx_eth0_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1100) - MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT), -#endif +static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1000_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC0_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR, + AU1500_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1100] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1100_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1550_MAC0_DMA_INT) + }, }; - static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { .phy1_search_mac0 = 1, }; @@ -396,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { static struct platform_device au1xxx_eth0_device = { .name = "au1000-eth", .id = 0, - .num_resources = ARRAY_SIZE(au1xxx_eth0_resources), - .resource = au1xxx_eth0_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth0_platform_data, }; -#ifndef CONFIG_SOC_AU1100 -static struct resource au1xxx_eth1_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT), -#endif +static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1000_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC1_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR + 4, + AU1500_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1550_MAC1_DMA_INT) + }, }; static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { @@ -419,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { static struct platform_device au1xxx_eth1_device = { .name = "au1000-eth", .id = 1, - .num_resources = ARRAY_SIZE(au1xxx_eth1_resources), - .resource = au1xxx_eth1_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth1_platform_data, }; -#endif void __init au1xxx_override_eth_cfg(unsigned int port, struct au1000_eth_platform_data *eth_data) @@ -434,15 +463,65 @@ void __init au1xxx_override_eth_cfg(unsigned int port, if (port == 0) memcpy(&au1xxx_eth0_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#ifndef CONFIG_SOC_AU1100 else memcpy(&au1xxx_eth1_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#endif +} + +static void __init alchemy_setup_macs(int ctype) +{ + int ret, i; + unsigned char ethaddr[6]; + struct resource *macres; + + /* Handle 1st MAC */ + if (alchemy_get_macs(ctype) < 1) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); + return; + } + memcpy(macres, au1xxx_eth0_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth0_device.resource = macres; + + i = prom_get_ethernet_addr(ethaddr); + if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) + memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + + ret = platform_device_register(&au1xxx_eth0_device); + if (!ret) + printk(KERN_INFO "Alchemy: failed to register MAC0\n"); + + + /* Handle 2nd MAC */ + if (alchemy_get_macs(ctype) < 2) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); + return; + } + memcpy(macres, au1xxx_eth1_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth1_device.resource = macres; + + ethaddr[5] += 1; /* next addr for 2nd MAC */ + if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) + memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); + + /* Register second MAC if enabled in pinfunc */ + if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) { + ret = platform_device_register(&au1xxx_eth1_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC1\n"); + } } static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xx0_uart_device, &au1xxx_usb_ohci_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, @@ -460,36 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif - &au1xxx_eth0_device, }; static int __init au1xxx_platform_init(void) { - unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int err, i; - unsigned char ethaddr[6]; + int err, ctype = alchemy_get_cputype(); - /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags; i++) - au1x00_uart_data[i].uartclk = uartclk; - - /* use firmware-provided mac addr if available and necessary */ - i = prom_get_ethernet_addr(ethaddr); - if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) - memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + alchemy_setup_uarts(ctype); + alchemy_setup_macs(ctype); err = platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); -#ifndef CONFIG_SOC_AU1100 - ethaddr[5] += 1; /* next addr for 2nd MAC */ - if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) - memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); - - /* Register second MAC if enabled in pinfunc */ - if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) - err = platform_device_register(&au1xxx_eth1_device); -#endif - return err; } diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 561e5da..1b887c8 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -52,8 +52,6 @@ void __init plat_mem_setup(void) /* this is faster than wasting cycles trying to approximate it */ preset_lpj = (est_freq >> 1) / HZ; - board_setup(); /* board specific setup */ - if (au1xxx_cpu_needs_config_od()) /* Various early Au1xx0 errata corrected by this */ set_c0_config(1 << 19); /* Set Config[OD] */ @@ -61,6 +59,8 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ + board_setup(); /* board specific setup */ + /* IO/MEM resources. */ set_io_port_base(0); ioport_resource.start = IOPORT_RESOURCE_START; diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 2aecb2f..d5da6ad 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int) goto cntr_err; /* register counter1 clocksource and event device */ - clocksource_set_clock(&au1x_counter1_clocksource, 32768); - clocksource_register(&au1x_counter1_clocksource); + clocksource_register_hz(&au1x_counter1_clocksource, 32768); cd->shift = 32; cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index 4a89800..1dac4f2 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -23,6 +23,13 @@ void __init board_setup(void) unsigned long freq0, clksrc, div, pfc; unsigned short whoami; + /* Set Config[OD] (disable overlapping bus transaction): + * This gets rid of a _lot_ of spurious interrupts (especially + * wrt. IDE); but incurs ~10% performance hit in some + * cpu-bound applications. + */ + set_c0_config(1 << 19); + bcsr_init(DB1200_BCSR_PHYS_ADDR, DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 05f120f..5c956fe 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -127,13 +127,10 @@ const char *get_system_type(void) void __init board_setup(void) { unsigned long bcsr1, bcsr2; - u32 pin_func; bcsr1 = DB1000_BCSR_PHYS_ADDR; bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - pin_func = 0; - #ifdef CONFIG_MIPS_DB1000 printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); #endif @@ -164,12 +161,16 @@ void __init board_setup(void) /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); + { + u32 pin_func; + + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); + } #endif bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ @@ -177,31 +178,35 @@ void __init board_setup(void) alchemy_gpio1_input_enable(); #ifdef CONFIG_MIPS_MIRAGE - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); + { + u32 pin_func; - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + /* GPIO[20] is output */ + alchemy_gpio_direction_output(20, 0); - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + alchemy_gpio_direction_output(209, 1); + + pm_power_off = mirage_power_off; + _machine_halt = mirage_power_off; + _machine_restart = (void(*)(char *))mips_softreset; + } #endif #ifdef CONFIG_MIPS_BOSPORUS diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index 2d85c4b..e64fdcb 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -65,7 +65,7 @@ void __init board_setup(void) /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); + alchemy_gpio1_input_enable(); udelay(100); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 83f4621..3b4fa32 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -56,7 +56,7 @@ void __init board_setup(void) sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); + alchemy_gpio1_input_enable(); udelay(100); /* GPIO201 is input for PCMCIA card detect */ diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index baeb213..e5306b5 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index ad2e3f1..5f8f069 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,9 +36,6 @@ #include <prom.h> -#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR) -#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR) - char irq_tab_alchemy[][5] __initdata = { [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, }; @@ -67,18 +64,15 @@ static void gpr_power_off(void) void __init board_setup(void) { - printk(KERN_INFO "Tarpeze ITS GPR board\n"); + printk(KERN_INFO "Trapeze ITS GPR board\n"); pm_power_off = gpr_power_off; _machine_halt = gpr_power_off; _machine_restart = gpr_reset; - /* Enable UART3 */ - au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */ - au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - /* Enable UART1 */ - au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + /* Enable UART1/3 */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c index f044f4c..229aafa 100644 --- a/arch/mips/alchemy/gpr/init.c +++ b/arch/mips/alchemy/gpr/init.c @@ -59,5 +59,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index cf436ab..3ae984c 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -87,7 +87,7 @@ void __init board_setup(void) au_writel(SYS_PF_NI2, SYS_PINFUNC); /* Initialize GPIO */ - au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); + au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index f8d2557..2e81cc7 100644 --- a/arch/mips/alchemy/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 956f946..55628e3 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -53,8 +53,8 @@ static struct platform_device mtx1_button = { static struct resource mtx1_wdt_res[] = { [0] = { - .start = 15, - .end = 15, + .start = 215, + .end = 215, .name = "mtx1-wdt-gpio", .flags = IORESOURCE_IRQ, } diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index febfb0f..81e57fa 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -66,13 +66,10 @@ void __init board_setup(void) au_writel(pin_func, SYS_PINFUNC); /* Enable UART */ - au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - mdelay(10); - au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - mdelay(10); - - /* Enable DTR = USB power up */ - au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); #ifdef CONFIG_PCI #if defined(__MIPSEB__) diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 15125c2..0ee02cf 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -51,14 +51,13 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); } void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index 425dfa5..bb571bc 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -325,9 +325,7 @@ int __init ar7_gpio_init(void) size = 0x1f; } - gpch->regs = ioremap_nocache(AR7_REGS_GPIO, - AR7_REGS_GPIO + 0x10); - + gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size); if (!gpch->regs) { printk(KERN_ERR "%s: failed to ioremap regs\n", gpch->chip.label); diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index e5b6615..54db815 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005 Broadcom Corporation * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,7 +24,7 @@ static char nvram_buf[NVRAM_SPACE]; /* Probe for NVRAM header */ -static void __init early_nvram_init(void) +static void early_nvram_init(void) { struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; struct nvram_header *header; diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index c95f90b..73b529b 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -3,6 +3,7 @@ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de> * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> + * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -57,10 +58,49 @@ static void bcm47xx_machine_halt(void) } #define READ_FROM_NVRAM(_outvar, name, buf) \ - if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\ + if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\ sprom->_outvar = simple_strtoul(buf, NULL, 0); -static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) +#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \ + if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \ + nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\ + sprom->_outvar = simple_strtoul(buf, NULL, 0); + +static inline int nvram_getprefix(const char *prefix, char *name, + char *buf, int len) +{ + if (prefix) { + char key[100]; + + snprintf(key, sizeof(key), "%s%s", prefix, name); + return nvram_getenv(key, buf, len); + } + + return nvram_getenv(name, buf, len); +} + +static u32 nvram_getu32(const char *name, char *buf, int len) +{ + int rv; + char key[100]; + u16 var0, var1; + + snprintf(key, sizeof(key), "%s0", name); + rv = nvram_getenv(key, buf, len); + /* return 0 here so this looks like unset */ + if (rv < 0) + return 0; + var0 = simple_strtoul(buf, NULL, 0); + + snprintf(key, sizeof(key), "%s1", name); + rv = nvram_getenv(key, buf, len); + if (rv < 0) + return 0; + var1 = simple_strtoul(buf, NULL, 0); + return var1 << 16 | var0; +} + +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix) { char buf[100]; u32 boardflags; @@ -69,11 +109,12 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) sprom->revision = 1; /* Fallback: Old hardware does not define this. */ READ_FROM_NVRAM(revision, "sromrev", buf); - if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 || + nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->il0mac); - if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->et0mac); - if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->et1mac); READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf); READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf); @@ -95,20 +136,36 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf); READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf); READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf); - READ_FROM_NVRAM(gpio0, "wl0gpio0", buf); - READ_FROM_NVRAM(gpio1, "wl0gpio1", buf); - READ_FROM_NVRAM(gpio2, "wl0gpio2", buf); - READ_FROM_NVRAM(gpio3, "wl0gpio3", buf); - READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf); - READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf); - READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf); - READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf); - READ_FROM_NVRAM(itssi_a, "pa1itssit", buf); - READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf); + READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf); + READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf); + READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf); + READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf); + READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf); + READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf); + READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf); + READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf); + READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf); + READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf); READ_FROM_NVRAM(tri2g, "tri2g", buf); READ_FROM_NVRAM(tri5gl, "tri5gl", buf); READ_FROM_NVRAM(tri5g, "tri5g", buf); READ_FROM_NVRAM(tri5gh, "tri5gh", buf); + READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf); + READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf); + READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf); + READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf); + READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf); + READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf); + READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf); + READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf); + READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf); + READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf); + READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf); + READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf); + READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf); + READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf); + READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf); + READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf); READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf); READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf); READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf); @@ -120,19 +177,27 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf); READ_FROM_NVRAM(bxa5g, "bxa5g", buf); READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf); - READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf); - READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf); - READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf); - READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf); - if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) { + sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf)); + sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf)); + sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf)); + sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf)); + + READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf); + memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24, + sizeof(sprom->antenna_gain.ghz5)); + + if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) { boardflags = simple_strtoul(buf, NULL, 0); if (boardflags) { sprom->boardflags_lo = (boardflags & 0x0000FFFFU); sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16; } } - if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) { + if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) { boardflags = simple_strtoul(buf, NULL, 0); if (boardflags) { sprom->boardflags2_lo = (boardflags & 0x0000FFFFU); @@ -141,6 +206,22 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) } } +int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out) +{ + char prefix[10]; + + if (bus->bustype == SSB_BUSTYPE_PCI) { + snprintf(prefix, sizeof(prefix), "pci/%u/%u/", + bus->host_pci->bus->number + 1, + PCI_SLOT(bus->host_pci->devfn)); + bcm47xx_fill_sprom(out, prefix); + return 0; + } else { + printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } +} + static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { @@ -158,7 +239,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); - bcm47xx_fill_sprom(&iv->sprom); + bcm47xx_fill_sprom(&iv->sprom, NULL); if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); @@ -172,6 +253,11 @@ void __init plat_mem_setup(void) char buf[100]; struct ssb_mipscore *mcore; + err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom); + if (err) + printk(KERN_WARNING "bcm47xx: someone else already registered" + " a ssb SPROM callback handler (err %d)\n", err); + err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 8dba8cf..40b223b 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom = { .boardflags_lo = 0x2848, .boardflags_hi = 0x0000, }; + +int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) +{ + if (bus->bustype == SSB_BUSTYPE_PCI) { + memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); + return 0; + } else { + printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } +} #endif /* @@ -793,8 +804,9 @@ void __init board_prom_init(void) if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) - printk(KERN_ERR "failed to register fallback SPROM\n"); + if (ssb_arch_register_fallback_sprom( + &bcm63xx_get_fallback_sprom) < 0) + printk(KERN_ERR PFX "failed to register fallback SPROM\n"); } #endif } diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c index 88c9d963..9a62436 100644 --- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c +++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c @@ -16,8 +16,8 @@ int main(int argc, char *argv[]) { + unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; struct stat sb; - uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; if (argc != 3) { fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n", diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index 1bff22f..eb063e6 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -3,5 +3,5 @@ void putc(char c) { /* all current (Jan. 2010) in-kernel boards */ - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index caae228..cad555e 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -1,11 +1,7 @@ -config CAVIUM_OCTEON_SPECIFIC_OPTIONS - bool "Enable Octeon specific options" - depends on CPU_CAVIUM_OCTEON - default "y" +if CPU_CAVIUM_OCTEON config CAVIUM_CN63XXP1 bool "Enable CN63XXP1 errata worarounds" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help The CN63XXP1 chip requires build time workarounds to @@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1 config CAVIUM_OCTEON_2ND_KERNEL bool "Build the kernel to be used as a 2nd kernel on the same chip" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help This option configures this kernel to be linked at a different @@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL config CAVIUM_OCTEON_HW_FIX_UNALIGNED bool "Enable hardware fixups of unaligned loads and stores" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Configure the Octeon hardware to automatically fix unaligned loads @@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED config CAVIUM_OCTEON_CVMSEG_SIZE int "Number of L1 cache lines reserved for CVMSEG memory" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS range 0 54 default 1 help @@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE config CAVIUM_OCTEON_LOCK_L2 bool "Lock often used kernel code in the L2" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Enable locking parts of the kernel into the L2 cache. @@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_STATIC - depends on CPU_CAVIUM_OCTEON config CAVIUM_OCTEON_HELPER def_bool y @@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH config SWIOTLB def_bool y - depends on CPU_CAVIUM_OCTEON select IOMMU_HELPER select NEED_SG_DMA_LENGTH + + +endif # CPU_CAVIUM_OCTEON diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 26bf711..29d56af 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -105,8 +105,7 @@ unsigned long long notrace sched_clock(void) void __init plat_time_init(void) { clocksource_mips.rating = 300; - clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate()); - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate()); } static u64 octeon_udelay_factor; diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c index 9afc379..c8d3568 100644 --- a/arch/mips/cavium-octeon/executive/octeon-model.c +++ b/arch/mips/cavium-octeon/executive/octeon-model.c @@ -75,7 +75,7 @@ const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer) num_cores = cvmx_octeon_num_cores(); - /* Make sure the non existant devices look disabled */ + /* Make sure the non existent devices look disabled */ switch ((chip_id >> 8) & 0xff) { case 6: /* CN50XX */ case 2: /* CN30XX */ diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index cecaf62..cd61d72 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -75,7 +75,7 @@ static int __init octeon_cf_device_init(void) * zero. */ - /* Asume that CS1 immediately follows. */ + /* Assume that CS1 immediately follows. */ mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); region_base = mio_boot_reg_cfg.s.base << 16; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 8b139bf..2d9028f 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -288,7 +288,6 @@ void octeon_user_io_init(void) union octeon_cvmemctl cvmmemctl; union cvmx_iob_fau_timeout fau_timeout; union cvmx_pow_nw_tim nm_tim; - uint64_t cvmctl; /* Get the current settings for CP0_CVMMEMCTL_REG */ cvmmemctl.u64 = read_c0_cvmmemctl(); @@ -392,12 +391,6 @@ void octeon_user_io_init(void) CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128); - /* Move the performance counter interrupts to IRQ 6 */ - cvmctl = read_c0_cvmctl(); - cvmctl &= ~(7 << 7); - cvmctl |= 6 << 7; - write_c0_cvmctl(cvmctl); - /* Set a default for the hardware timeouts */ fau_timeout.u64 = 0; fau_timeout.s.tout_val = 0xfff; @@ -662,7 +655,7 @@ void __init plat_mem_setup(void) * some memory vectors. When SPARSEMEM is in use, it doesn't * verify that the size is big enough for the final * vectors. Making the smallest chuck 4MB seems to be enough - * to consistantly work. + * to consistently work. */ mem_alloc_size = 4 << 20; if (mem_alloc_size > MAX_MEMORY) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index ba78b21..8b60642 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -37,13 +37,15 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id) uint64_t action; /* Load the mailbox register to figure out what we're supposed to do */ - action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)); + action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff; /* Clear the mailbox to clear the interrupt */ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); /* Check if we've been told to flush the icache */ if (action & SMP_ICACHE_FLUSH) @@ -200,16 +202,15 @@ void octeon_prepare_cpus(unsigned int max_cpus) if (labi->labi_signature != LABI_SIGNATURE) panic("The bootloader version on this board is incorrect."); #endif - - cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff); + /* + * Only the low order mailbox bits are used for IPIs, leave + * the other bits alone. + */ + cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, - "mailbox0", mailbox_interrupt)) { + "SMP-IPI", mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } - if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED, - "mailbox1", mailbox_interrupt)) { - panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n"); - } } /** diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 167c1d0..b6acd2f 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -86,8 +86,8 @@ CONFIG_NET_SCHED=y CONFIG_NET_EMATCH=y CONFIG_NET_CLS_ACT=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -329,7 +329,7 @@ CONFIG_USB_LED=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_M66592=y CONFIG_MMC=m -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_FB_SM7XX=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 7270f31..5527abb 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -374,7 +374,7 @@ CONFIG_FB_CIRRUS=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_HID=m -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index a97a42c..37862b2 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -225,8 +225,8 @@ CONFIG_TOSHIBA_FIR=m CONFIG_VLSI_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig new file mode 100644 index 0000000..e4b399f --- /dev/null +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -0,0 +1,574 @@ +CONFIG_NLM_XLR_BOARD=y +CONFIG_HIGHMEM=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_KEXEC=y +CONFIG_EXPERIMENTAL=y +CONFIG_CROSS_COMPILE="mips64-unknown-linux-gnu-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs" +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_ELF_CORE is not set +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PERF_EVENTS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BINFMT_MISC=m +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NETLABEL=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_DECNET_NF_GRABULATOR=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_TIPC=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +CONFIG_LLC2=m +CONFIG_IPX=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_X25=m +CONFIG_LAPB=m +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_DCB=y +CONFIG_NET_PKTGEN=m +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CONNECTOR=y +CONFIG_MTD=m +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_CDROM_PKTCDVD=y +CONFIG_MISC_DEVICES=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_N_HDLC=m +# CONFIG_DEVKMEM is not set +CONFIG_STALDRV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_RAW_DRIVER=m +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_EXOFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_FSCACHE=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_ICS=y +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_SYSV68_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_SCHED_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KGDB=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_LSM_MMAP_MIN_ADDR=0 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SMACK=y +CONFIG_SECURITY_TOMOYO=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRC_CCITT=m +CONFIG_CRC7=m diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c index c508c00..b7f9dd3 100644 --- a/arch/mips/fw/arc/promlib.c +++ b/arch/mips/fw/arc/promlib.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 1996 David S. Miller (dm@sgi.com) - * Compability with board caches, Ulf Carlsson + * Compatibility with board caches, Ulf Carlsson */ #include <linux/kernel.h> #include <asm/sgialib.h> diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h index 650ac9b..b4db69f 100644 --- a/arch/mips/include/asm/cache.h +++ b/arch/mips/include/asm/cache.h @@ -17,6 +17,6 @@ #define SMP_CACHE_SHIFT L1_CACHE_SHIFT #define SMP_CACHE_BYTES L1_CACHE_BYTES -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) #endif /* _ASM_CACHE_H */ diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h index fa4328f..65f9bdd 100644 --- a/arch/mips/include/asm/cevt-r4k.h +++ b/arch/mips/include/asm/cevt-r4k.h @@ -14,6 +14,9 @@ #ifndef __ASM_CEVT_R4K_H #define __ASM_CEVT_R4K_H +#include <linux/clockchips.h> +#include <asm/time.h> + DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void mips_event_handler(struct clock_event_device *dev); diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 8687753..34c0d3c 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -33,6 +33,7 @@ #define PRID_COMP_TOSHIBA 0x070000 #define PRID_COMP_LSI 0x080000 #define PRID_COMP_LEXRA 0x0b0000 +#define PRID_COMP_NETLOGIC 0x0c0000 #define PRID_COMP_CAVIUM 0x0d0000 #define PRID_COMP_INGENIC 0xd00000 @@ -142,6 +143,31 @@ #define PRID_IMP_JZRISC 0x0200 /* + * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC + */ +#define PRID_IMP_NETLOGIC_XLR732 0x0000 +#define PRID_IMP_NETLOGIC_XLR716 0x0200 +#define PRID_IMP_NETLOGIC_XLR532 0x0900 +#define PRID_IMP_NETLOGIC_XLR308 0x0600 +#define PRID_IMP_NETLOGIC_XLR532C 0x0800 +#define PRID_IMP_NETLOGIC_XLR516C 0x0a00 +#define PRID_IMP_NETLOGIC_XLR508C 0x0b00 +#define PRID_IMP_NETLOGIC_XLR308C 0x0f00 +#define PRID_IMP_NETLOGIC_XLS608 0x8000 +#define PRID_IMP_NETLOGIC_XLS408 0x8800 +#define PRID_IMP_NETLOGIC_XLS404 0x8c00 +#define PRID_IMP_NETLOGIC_XLS208 0x8e00 +#define PRID_IMP_NETLOGIC_XLS204 0x8f00 +#define PRID_IMP_NETLOGIC_XLS108 0xce00 +#define PRID_IMP_NETLOGIC_XLS104 0xcf00 +#define PRID_IMP_NETLOGIC_XLS616B 0x4000 +#define PRID_IMP_NETLOGIC_XLS608B 0x4a00 +#define PRID_IMP_NETLOGIC_XLS416B 0x4400 +#define PRID_IMP_NETLOGIC_XLS412B 0x4c00 +#define PRID_IMP_NETLOGIC_XLS408B 0x4e00 +#define PRID_IMP_NETLOGIC_XLS404B 0x4f00 + +/* * Definitions for 7:0 on legacy processors */ @@ -234,6 +260,7 @@ enum cpu_type_enum { */ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, + CPU_XLR, CPU_LAST }; diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h index b9c8203..c0ead63 100644 --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -108,7 +108,7 @@ extern int (*__pmax_close)(int); /* * On MIPS64 we have to call PROM functions via a helper - * dispatcher to accomodate ABI incompatibilities. + * dispatcher to accommodate ABI incompatibilities. */ #define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \ __asm__(#fun " = call_o32") diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index 655f849..7aa37dd 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -5,7 +5,9 @@ #include <asm/cache.h> #include <asm-generic/dma-coherent.h> +#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ #include <dma-coherence.h> +#endif extern struct dma_map_ops *mips_dma_map_ops; diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h index 992d232..c5c7c0e 100644 --- a/arch/mips/include/asm/floppy.h +++ b/arch/mips/include/asm/floppy.h @@ -24,7 +24,7 @@ static inline void fd_cacheflush(char * addr, long size) * And on Mips's the CMOS info fails also ... * * FIXME: This information should come from the ARC configuration tree - * or whereever a particular machine has stored this ... + * or wherever a particular machine has stored this ... */ #define FLOPPY0_TYPE fd_drive_type(0) #define FLOPPY1_TYPE fd_drive_type(1) diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index f5e8560..c565b7c 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { + flush_tlb_mm(vma->vm_mm); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h index aca05a4..77adda2 100644 --- a/arch/mips/include/asm/hw_irq.h +++ b/arch/mips/include/asm/hw_irq.h @@ -13,7 +13,7 @@ extern atomic_t irq_err_count; /* - * interrupt-retrigger: NOP for now. This may not be apropriate for all + * interrupt-retrigger: NOP for now. This may not be appropriate for all * machines, we'll see ... */ diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h index 48bb823..9ad0113 100644 --- a/arch/mips/include/asm/i8253.h +++ b/arch/mips/include/asm/i8253.h @@ -12,8 +12,13 @@ #define PIT_CH0 0x40 #define PIT_CH2 0x42 +#define PIT_LATCH LATCH + extern raw_spinlock_t i8253_lock; extern void setup_pit_timer(void); +#define inb_pit inb_p +#define outb_pit outb_p + #endif /* __ASM_I8253_H */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 5b017f2..b04e4de 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -242,7 +242,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, * This version of ioremap ensures that the memory is marked uncachable * on the CPU as well as honouring existing caching rules from things like * the PCI bus. Note that there are other caches and buffers on many - * busses. In paticular driver authors should read up on PCI writes + * busses. In particular driver authors should read up on PCI writes * * It's useful if some control registers are in such an area and * write combining or read caching is not desirable: diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 9ef3b0d..309cbcd 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -174,7 +174,7 @@ __asm__( "mtc0 \\flags, $2, 1 \n" #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) /* - * Slow, but doesn't suffer from a relativly unlikely race + * Slow, but doesn't suffer from a relatively unlikely race * condition we're having since days 1. */ " beqz \\flags, 1f \n" diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h index 7622ccf..1881b31 100644 --- a/arch/mips/include/asm/jump_label.h +++ b/arch/mips/include/asm/jump_label.h @@ -20,16 +20,18 @@ #define WORD_INSN ".word" #endif -#define JUMP_LABEL(key, label) \ - do { \ - asm goto("1:\tnop\n\t" \ - "nop\n\t" \ - ".pushsection __jump_table, \"a\"\n\t" \ - WORD_INSN " 1b, %l[" #label "], %0\n\t" \ - ".popsection\n\t" \ - : : "i" (key) : : label); \ - } while (0) - +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:\tnop\n\t" + "nop\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + WORD_INSN " 1b, %l[l_yes], %0\n\t" + ".popsection\n\t" + : : "i" (key) : : l_yes); + return false; +l_yes: + return true; +} #endif /* __KERNEL__ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index a697661..f260ebe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -161,6 +161,45 @@ static inline int alchemy_get_cputype(void) return ALCHEMY_CPU_UNKNOWN; } +/* return number of uarts on a given cputype */ +static inline int alchemy_get_uarts(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + return 4; + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1200: + return 2; + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1550: + return 3; + } + return 0; +} + +/* enable an UART block if it isn't already */ +static inline void alchemy_uart_enable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + + /* reset, enable clock, deassert reset */ + if ((__raw_readl(addr + 0x100) & 3) != 3) { + __raw_writel(0, addr + 0x100); + wmb(); + __raw_writel(1, addr + 0x100); + wmb(); + } + __raw_writel(3, addr + 0x100); + wmb(); +} + +static inline void alchemy_uart_disable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ + wmb(); +} + static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); @@ -180,6 +219,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) wmb(); } +/* return number of ethernet MACs on a given cputype */ +static inline int alchemy_get_macs(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return 2; + case ALCHEMY_CPU_AU1100: + return 1; + } + return 0; +} + /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); @@ -630,38 +683,42 @@ enum soc_au1200_ints { /* * Physical base addresses for integrated peripherals + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 */ +#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ +#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ +#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ +#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ +#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ +#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ +#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ +#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ +#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ + + #ifdef CONFIG_SOC_AU1000 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define SYS_PHYS_ADDR 0x11900000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL #define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL @@ -672,30 +729,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1500 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x11500000 -#define MAC1_PHYS_ADDR 0x11510000 -#define MACEN_PHYS_ADDR 0x11520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define PCI_MEM_PHYS_ADDR 0x400000000ULL #define PCI_IO_PHYS_ADDR 0x500000000ULL #define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL @@ -710,34 +745,10 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1100 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define LCD_PHYS_ADDR 0x15000000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL @@ -749,22 +760,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1550 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBH_PHYS_ADDR 0x14020000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PE_PHYS_ADDR 0x14008000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 @@ -786,19 +783,10 @@ enum soc_au1200_ints { #define STATIC_MEM_PHYS_ADDR 0x14001000 #define AES_PHYS_ADDR 0x10300000 #define CIM_PHYS_ADDR 0x14004000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBM_PHYS_ADDR 0x14020000 #define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 #define LCD_PHYS_ADDR 0x15000000 #define SWCNT_PHYS_ADDR 0x1110010C #define MAEFE_PHYS_ADDR 0x14012000 @@ -835,183 +823,43 @@ enum soc_au1200_ints { #endif -/* Interrupt Controller register offsets */ -#define IC_CFG0RD 0x40 -#define IC_CFG0SET 0x40 -#define IC_CFG0CLR 0x44 -#define IC_CFG1RD 0x48 -#define IC_CFG1SET 0x48 -#define IC_CFG1CLR 0x4C -#define IC_CFG2RD 0x50 -#define IC_CFG2SET 0x50 -#define IC_CFG2CLR 0x54 -#define IC_REQ0INT 0x54 -#define IC_SRCRD 0x58 -#define IC_SRCSET 0x58 -#define IC_SRCCLR 0x5C -#define IC_REQ1INT 0x5C -#define IC_ASSIGNRD 0x60 -#define IC_ASSIGNSET 0x60 -#define IC_ASSIGNCLR 0x64 -#define IC_WAKERD 0x68 -#define IC_WAKESET 0x68 -#define IC_WAKECLR 0x6C -#define IC_MASKRD 0x70 -#define IC_MASKSET 0x70 -#define IC_MASKCLR 0x74 -#define IC_RISINGRD 0x78 -#define IC_RISINGCLR 0x78 -#define IC_FALLINGRD 0x7C -#define IC_FALLINGCLR 0x7C -#define IC_TESTBIT 0x80 - - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 /* Au1000 */ #ifdef CONFIG_SOC_AU1000 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT - -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1000 */ /* Au1500 */ #ifdef CONFIG_SOC_AU1500 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017fffc #define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT - -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1500 */ /* Au1100 */ #ifdef CONFIG_SOC_AU1100 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT - -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define NUM_ETH_INTERFACES 1 #endif /* CONFIG_SOC_AU1100 */ #ifdef CONFIG_SOC_AU1550 -#define UART0_ADDR 0xB1100000 #define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ #define USB_OHCI_LEN 0x00060000 #define USB_HOST_CONFIG 0xB4027ffc #define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT - -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ #ifdef CONFIG_SOC_AU1200 -#define UART0_ADDR 0xB1100000 - #define USB_UOC_BASE 0x14020020 #define USB_UOC_LEN 0x20 #define USB_OHCI_BASE 0x14020100 @@ -1504,22 +1352,6 @@ enum soc_au1200_ints { #define SYS_PINFUNC_S1B (1 << 2) #endif -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) - /* Power Management */ #define SYS_SCRATCH0 0xB1900018 #define SYS_SCRATCH1 0xB190001C @@ -1635,12 +1467,6 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -/* Secure Digital (SD) Controller */ -#define SD0_XMIT_FIFO 0xB0600000 -#define SD0_RECV_FIFO 0xB0600004 -#define SD1_XMIT_FIFO 0xB0680000 -#define SD1_RECV_FIFO 0xB0680004 - #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ #define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h index c333b4e..59f5b55 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -37,10 +37,6 @@ #define NUM_AU1000_DMA_CHANNELS 8 -/* DMA Channel Base Addresses */ -#define DMA_CHANNEL_BASE 0xB4002000 -#define DMA_CHANNEL_LEN 0x00000100 - /* DMA Channel Register Offsets */ #define DMA_MODE_SET 0x00000000 #define DMA_MODE_READ DMA_MODE_SET diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index c8a553a3..2fdacfe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -37,14 +37,6 @@ #ifndef _LANGUAGE_ASSEMBLY -/* - * The DMA base addresses. - * The channels are every 256 bytes (0x0100) from the channel 0 base. - * Interrupt status/enable is bits 15:0 for channels 15 to zero. - */ -#define DDMA_GLOBAL_BASE 0xb4003000 -#define DDMA_CHANNEL_BASE 0xb4002000 - typedef volatile struct dbdma_global { u32 ddma_config; u32 ddma_intstat; diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 62d2f13..1f41a52 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -24,6 +24,23 @@ #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) +/* GPIO1 registers within SYS_ area */ +#define SYS_TRIOUTRD 0x100 +#define SYS_TRIOUTCLR 0x100 +#define SYS_OUTPUTRD 0x108 +#define SYS_OUTPUTSET 0x108 +#define SYS_OUTPUTCLR 0x10C +#define SYS_PINSTATERD 0x110 +#define SYS_PININPUTEN 0x110 + +/* register offsets within GPIO2 block */ +#define GPIO2_DIR 0x00 +#define GPIO2_OUTPUT 0x08 +#define GPIO2_PINSTATE 0x0C +#define GPIO2_INTENABLE 0x10 +#define GPIO2_ENABLE 0x14 + +struct gpio; static inline int au1000_gpio1_to_irq(int gpio) { @@ -200,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq) */ static inline void alchemy_gpio1_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR; - au_writel(mask, r); - au_sync(); + __raw_writel(mask, base + r); + wmb(); } static inline int alchemy_gpio1_get_value(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - return au_readl(SYS_PINSTATERD) & mask; + return __raw_readl(base + SYS_PINSTATERD) & mask; } static inline int alchemy_gpio1_direction_input(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - au_writel(mask, SYS_TRIOUTCLR); - au_sync(); + __raw_writel(mask, base + SYS_TRIOUTCLR); + wmb(); return 0; } @@ -257,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio) */ static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); - unsigned long d = au_readl(GPIO2_DIR); + unsigned long d = __raw_readl(base + GPIO2_DIR); + if (to_out) d |= mask; else d &= ~mask; - au_writel(d, GPIO2_DIR); - au_sync(); + __raw_writel(d, base + GPIO2_DIR); + wmb(); } static inline void alchemy_gpio2_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask; mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); - au_writel(mask, GPIO2_OUTPUT); - au_sync(); + __raw_writel(mask, base + GPIO2_OUTPUT); + wmb(); } static inline int alchemy_gpio2_get_value(int gpio) { - return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); } static inline int alchemy_gpio2_direction_input(int gpio) @@ -329,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio) */ static inline void alchemy_gpio1_input_enable(void) { - au_writel(0, SYS_PININPUTEN); /* the write op is key */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */ + wmb(); } /* GPIO2 shared interrupts and control */ static inline void __alchemy_gpio2_mod_int(int gpio2, int en) { - unsigned long r = au_readl(GPIO2_INTENABLE); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + unsigned long r = __raw_readl(base + GPIO2_INTENABLE); if (en) r |= 1 << gpio2; else r &= ~(1 << gpio2); - au_writel(r, GPIO2_INTENABLE); - au_sync(); + __raw_writel(r, base + GPIO2_INTENABLE); + wmb(); } /** @@ -418,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2) */ static inline void alchemy_gpio2_enable(void) { - au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */ - au_sync(); - au_writel(1, GPIO2_ENABLE); /* clock enabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */ + wmb(); + __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */ + wmb(); } /** @@ -431,8 +458,9 @@ static inline void alchemy_gpio2_enable(void) */ static inline void alchemy_gpio2_disable(void) { - au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */ + wmb(); } /**********************************************************************/ @@ -556,6 +584,16 @@ static inline void gpio_set_value(int gpio, int v) alchemy_gpio_set_value(gpio, v); } +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + static inline int gpio_is_valid(int gpio) { return alchemy_gpio_is_valid(gpio); @@ -581,10 +619,50 @@ static inline int gpio_request(unsigned gpio, const char *label) return 0; } +static inline int gpio_request_one(unsigned gpio, + unsigned long flags, const char *label) +{ + return 0; +} + +static inline int gpio_request_array(struct gpio *array, size_t num) +{ + return 0; +} + static inline void gpio_free(unsigned gpio) { } +static inline void gpio_free_array(struct gpio *array, size_t num) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h index 9759588..184d5ec 100644 --- a/arch/mips/include/asm/mach-bcm47xx/nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h @@ -39,8 +39,16 @@ extern int nvram_getenv(char *name, char *val, size_t val_len); static inline void nvram_parse_macaddr(char *buf, u8 *macaddr) { - sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1], - &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]); + if (strchr(buf, ':')) + sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else if (strchr(buf, '-')) + sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else + printk(KERN_WARNING "Can not parse mac address: %s\n", buf); } #endif diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h index 5325084..ed72e6a 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -4,7 +4,7 @@ #define TAGVER_LEN 4 /* Length of Tag Version */ #define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ #define SIG1_LEN 20 /* Company Signature 1 Length */ -#define SIG2_LEN 14 /* Company Signature 2 Lenght */ +#define SIG2_LEN 14 /* Company Signature 2 Length */ #define BOARDID_LEN 16 /* Length of BoardId */ #define ENDIANFLAG_LEN 2 /* Endian Flag Length */ #define CHIPID_LEN 6 /* Chip Id Length */ @@ -88,7 +88,7 @@ struct bcm_tag { char kernel_crc[CRC_LEN]; /* 228-235: Unused at present */ char reserved1[8]; - /* 236-239: CRC32 of header excluding tagVersion */ + /* 236-239: CRC32 of header excluding last 20 bytes */ char header_crc[CRC_LEN]; /* 240-255: Unused at present */ char reserved2[16]; diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h index 0b2b5eb..dedef7d 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h @@ -63,6 +63,11 @@ # CN30XX Disable instruction prefetching or v0, v0, 0x2000 skip: + # First clear off CvmCtl[IPPCI] bit and move the performance + # counters interrupt to IRQ 6 + li v1, ~(7 << 7) + and v0, v0, v1 + ori v0, v0, (6 << 7) # Write the cavium control register dmtc0 v0, CP0_CVMCTL_REG sync diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h index c28ba8d..6b6bab4 100644 --- a/arch/mips/include/asm/mach-ip32/mc146818rtc.h +++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h @@ -26,7 +26,7 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr) } /* - * FIXME: Do it right. For now just assume that noone lives in 20th century + * FIXME: Do it right. For now just assume that no one lives in 20th century * and no O2 user in 22th century ;-) */ #define mc146818_decode_year(year) ((year) + 2000) diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h new file mode 100644 index 0000000..ce2f029 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/lantiq.h @@ -0,0 +1,63 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ +#ifndef _LANTIQ_H__ +#define _LANTIQ_H__ + +#include <linux/irq.h> + +/* generic reg access functions */ +#define ltq_r32(reg) __raw_readl(reg) +#define ltq_w32(val, reg) __raw_writel(val, reg) +#define ltq_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(reg) & ~(clear)) | (set), reg) +#define ltq_r8(reg) __raw_readb(reg) +#define ltq_w8(val, reg) __raw_writeb(val, reg) + +/* register access macros for EBU and CGU */ +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) +#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) +#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) + +extern __iomem void *ltq_ebu_membase; +extern __iomem void *ltq_cgu_membase; + +extern unsigned int ltq_get_cpu_ver(void); +extern unsigned int ltq_get_soc_type(void); + +/* clock speeds */ +#define CLOCK_60M 60000000 +#define CLOCK_83M 83333333 +#define CLOCK_111M 111111111 +#define CLOCK_133M 133333333 +#define CLOCK_167M 166666667 +#define CLOCK_200M 200000000 +#define CLOCK_266M 266666666 +#define CLOCK_333M 333333333 +#define CLOCK_400M 400000000 + +/* spinlock all ebu i/o */ +extern spinlock_t ebu_lock; + +/* some irq helpers */ +extern void ltq_disable_irq(struct irq_data *data); +extern void ltq_mask_and_ack_irq(struct irq_data *data); +extern void ltq_enable_irq(struct irq_data *data); + +/* find out what caused the last cpu reset */ +extern int ltq_reset_cause(void); +#define LTQ_RST_CAUSE_WDTRST 0x20 + +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff +#define LTQ_FLASH_START 0x10000000 +#define LTQ_FLASH_MAX 0x04000000 + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h new file mode 100644 index 0000000..a305f1d --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h @@ -0,0 +1,53 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_PLATFORM_H__ +#define _LANTIQ_PLATFORM_H__ + +#include <linux/mtd/partitions.h> +#include <linux/socket.h> + +/* struct used to pass info to the pci core */ +enum { + PCI_CLOCK_INT = 0, + PCI_CLOCK_EXT +}; + +#define PCI_EXIN0 0x0001 +#define PCI_EXIN1 0x0002 +#define PCI_EXIN2 0x0004 +#define PCI_EXIN3 0x0008 +#define PCI_EXIN4 0x0010 +#define PCI_EXIN5 0x0020 +#define PCI_EXIN_MAX 6 + +#define PCI_GNT1 0x0040 +#define PCI_GNT2 0x0080 +#define PCI_GNT3 0x0100 +#define PCI_GNT4 0x0200 + +#define PCI_REQ1 0x0400 +#define PCI_REQ2 0x0800 +#define PCI_REQ3 0x1000 +#define PCI_REQ4 0x2000 +#define PCI_REQ_SHIFT 10 +#define PCI_REQ_MASK 0xf + +struct ltq_pci_data { + int clock; + int gpio; + int irq[16]; +}; + +/* struct used to pass info to network drivers */ +struct ltq_eth_data { + struct sockaddr mac; + int mii_mode; +}; + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h new file mode 100644 index 0000000..01b08ef --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/war.h @@ -0,0 +1,24 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H +#define __ASM_MIPS_MACH_LANTIQ_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/irq.h b/arch/mips/include/asm/mach-lantiq/xway/irq.h new file mode 100644 index 0000000..a1471d2 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef __LANTIQ_IRQ_H +#define __LANTIQ_IRQ_H + +#include <lantiq_irq.h> + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h new file mode 100644 index 0000000..b4465a8 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h @@ -0,0 +1,66 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_XWAY_IRQ_H__ +#define _LANTIQ_XWAY_IRQ_H__ + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) +#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) +#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1) +#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2) + +#define LTQ_ASC_ASE_TIR INT_NUM_IM2_IRL0 +#define LTQ_ASC_ASE_RIR (INT_NUM_IM2_IRL0 + 2) +#define LTQ_ASC_ASE_EIR (INT_NUM_IM2_IRL0 + 3) + +#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15) +#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14) +#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16) + +#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21) +#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23) + +#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23) +#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22) +#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) + +#define MIPS_CPU_TIMER_IRQ 7 + +#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0) +#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1) +#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2) +#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3) +#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4) +#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5) +#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6) +#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7) +#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8) +#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9) +#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10) +#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11) +#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25) +#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26) +#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27) +#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28) +#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29) +#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30) +#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16) +#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21) + +#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24) + +#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14) + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h new file mode 100644 index 0000000..8a3c6be --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -0,0 +1,141 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_XWAY_H__ +#define _LTQ_XWAY_H__ + +#ifdef CONFIG_SOC_TYPE_XWAY + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_DANUBE1 0x129 +#define SOC_ID_DANUBE2 0x12B +#define SOC_ID_TWINPASS 0x12D +#define SOC_ID_AMAZON_SE 0x152 +#define SOC_ID_ARX188 0x16C +#define SOC_ID_ARX168 0x16D +#define SOC_ID_ARX182 0x16F + +/* SoC Types */ +#define SOC_TYPE_DANUBE 0x01 +#define SOC_TYPE_TWINPASS 0x02 +#define SOC_TYPE_AR9 0x03 +#define SOC_TYPE_VR9 0x04 +#define SOC_TYPE_AMAZON_SE 0x05 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x1E100400 +#define LTQ_ASC1_BASE_ADDR 0x1E100C00 +#define LTQ_ASC_SIZE 0x400 + +/* RCU - reset control unit */ +#define LTQ_RCU_BASE_ADDR 0x1F203000 +#define LTQ_RCU_SIZE 0x1000 + +/* GPTU - general purpose timer unit */ +#define LTQ_GPTU_BASE_ADDR 0x18000300 +#define LTQ_GPTU_SIZE 0x100 + +/* EBU - external bus unit */ +#define LTQ_EBU_GPIO_START 0x14000000 +#define LTQ_EBU_GPIO_SIZE 0x1000 + +#define LTQ_EBU_BASE_ADDR 0x1E105300 +#define LTQ_EBU_SIZE 0x100 + +#define LTQ_EBU_BUSCON0 0x0060 +#define LTQ_EBU_PCC_CON 0x0090 +#define LTQ_EBU_PCC_IEN 0x00A4 +#define LTQ_EBU_PCC_ISTAT 0x00A0 +#define LTQ_EBU_BUSCON1 0x0064 +#define LTQ_EBU_ADDRSEL1 0x0024 +#define EBU_WRDIS 0x80000000 + +/* CGU - clock generation unit */ +#define LTQ_CGU_BASE_ADDR 0x1F103000 +#define LTQ_CGU_SIZE 0x1000 + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x1F880200 +#define LTQ_ICU_SIZE 0x100 + +/* EIU - external interrupt unit */ +#define LTQ_EIU_BASE_ADDR 0x1F101000 +#define LTQ_EIU_SIZE 0x1000 + +/* PMU - power management unit */ +#define LTQ_PMU_BASE_ADDR 0x1F102000 +#define LTQ_PMU_SIZE 0x1000 + +#define PMU_DMA 0x0020 +#define PMU_USB 0x8041 +#define PMU_LED 0x0800 +#define PMU_GPT 0x1000 +#define PMU_PPE 0x2000 +#define PMU_FPI 0x4000 +#define PMU_SWITCH 0x10000000 + +/* ETOP - ethernet */ +#define LTQ_ETOP_BASE_ADDR 0x1E180000 +#define LTQ_ETOP_SIZE 0x40000 + +/* DMA */ +#define LTQ_DMA_BASE_ADDR 0x1E104100 +#define LTQ_DMA_SIZE 0x800 + +/* PCI */ +#define PCI_CR_BASE_ADDR 0x1E105400 +#define PCI_CR_SIZE 0x400 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +/* STP - serial to parallel conversion unit */ +#define LTQ_STP_BASE_ADDR 0x1E100BB0 +#define LTQ_STP_SIZE 0x40 + +/* GPIO */ +#define LTQ_GPIO0_BASE_ADDR 0x1E100B10 +#define LTQ_GPIO1_BASE_ADDR 0x1E100B40 +#define LTQ_GPIO2_BASE_ADDR 0x1E100B70 +#define LTQ_GPIO_SIZE 0x30 + +/* SSC */ +#define LTQ_SSC_BASE_ADDR 0x1e100800 +#define LTQ_SSC_SIZE 0x100 + +/* MEI - dsl core */ +#define LTQ_MEI_BASE_ADDR 0x1E116000 + +/* DEU - data encryption unit */ +#define LTQ_DEU_BASE_ADDR 0x1E103100 + +/* MPS - multi processor unit (voice) */ +#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) +#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) + +/* request a non-gpio and set the PIO config */ +extern int ltq_gpio_request(unsigned int pin, unsigned int alt0, + unsigned int alt1, unsigned int dir, const char *name); +extern void ltq_pmu_enable(unsigned int module); +extern void ltq_pmu_disable(unsigned int module); + +static inline int ltq_is_ar9(void) +{ + return (ltq_get_soc_type() == SOC_TYPE_AR9); +} + +static inline int ltq_is_vr9(void) +{ + return (ltq_get_soc_type() == SOC_TYPE_VR9); +} + +#endif /* CONFIG_SOC_TYPE_XWAY */ +#endif /* _LTQ_XWAY_H__ */ diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h new file mode 100644 index 0000000..872943a --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h @@ -0,0 +1,60 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#ifndef LTQ_DMA_H__ +#define LTQ_DMA_H__ + +#define LTQ_DESC_SIZE 0x08 /* each descriptor is 64bit */ +#define LTQ_DESC_NUM 0x40 /* 64 descriptors / channel */ + +#define LTQ_DMA_OWN BIT(31) /* owner bit */ +#define LTQ_DMA_C BIT(30) /* complete bit */ +#define LTQ_DMA_SOP BIT(29) /* start of packet */ +#define LTQ_DMA_EOP BIT(28) /* end of packet */ +#define LTQ_DMA_TX_OFFSET(x) ((x & 0x1f) << 23) /* data bytes offset */ +#define LTQ_DMA_RX_OFFSET(x) ((x & 0x7) << 23) /* data bytes offset */ +#define LTQ_DMA_SIZE_MASK (0xffff) /* the size field is 16 bit */ + +struct ltq_dma_desc { + u32 ctl; + u32 addr; +}; + +struct ltq_dma_channel { + int nr; /* the channel number */ + int irq; /* the mapped irq */ + int desc; /* the current descriptor */ + struct ltq_dma_desc *desc_base; /* the descriptor base */ + int phys; /* physical addr */ +}; + +enum { + DMA_PORT_ETOP = 0, + DMA_PORT_DEU, +}; + +extern void ltq_dma_enable_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_disable_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_ack_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_open(struct ltq_dma_channel *ch); +extern void ltq_dma_close(struct ltq_dma_channel *ch); +extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch); +extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch); +extern void ltq_dma_free(struct ltq_dma_channel *ch); +extern void ltq_dma_init_port(int p); + +#endif diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h index 021f77c..2a8e2bb 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -1,5 +1,5 @@ /* - * The header file of cs5536 sourth bridge. + * The header file of cs5536 south bridge. * * Copyright (C) 2007 Lemote, Inc. * Author : jlliu <liujl@lemote.com> diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h new file mode 100644 index 0000000..3b72827 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_counter 1 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 1 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h new file mode 100644 index 0000000..b590245 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/irq.h @@ -0,0 +1,14 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems. + */ +#ifndef __ASM_NETLOGIC_IRQ_H +#define __ASM_NETLOGIC_IRQ_H + +#define NR_IRQS 64 +#define MIPS_CPU_IRQ_BASE 0 + +#endif /* __ASM_NETLOGIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-netlogic/war.h b/arch/mips/include/asm/mach-netlogic/war.h new file mode 100644 index 0000000..22da893 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/war.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems. + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_NLM_WAR_H +#define __ASM_MIPS_MACH_NLM_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_NLM_WAR_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h index 6d1ff90..6505925 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1000.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h @@ -1,5 +1,5 @@ /* - * Alchemy Semi Pb1000 Referrence Board + * Alchemy Semi Pb1000 Reference Board * * Copyright 2001, 2008 MontaVista Software Inc. * Author: MontaVista Software, Inc. <source@mvista.com> diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h index 962eb55..fce4332 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy Pb1200 Referrence Board + * AMD Alchemy Pb1200 Reference Board * Board Registers defines. * * ######################################################################## diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h index fc4d766..f835c88 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy Semi PB1550 Referrence Board + * AMD Alchemy Semi PB1550 Reference Board * Board Registers defines. * * Copyright 2004 Embedded Edge LLC. diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h index f76029c..a8e72cf 100644 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -48,7 +48,7 @@ static inline unsigned long virt_to_phys_from_pte(void *addr) /* check for a valid page */ if (pte_present(pte)) { /* get the physical address the page is - * refering to */ + * referring to */ phys_addr = (unsigned long) page_to_phys(pte_page(pte)); /* add the offset within the page */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 4d98709..6a6f8a8 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -922,7 +922,7 @@ do { \ #define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) /* - * The WatchLo register. There may be upto 8 of them. + * The WatchLo register. There may be up to 8 of them. */ #define read_c0_watchlo0() __read_ulong_c0_register($18, 0) #define read_c0_watchlo1() __read_ulong_c0_register($18, 1) @@ -942,7 +942,7 @@ do { \ #define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) /* - * The WatchHi register. There may be upto 8 of them. + * The WatchHi register. There may be up to 8 of them. */ #define read_c0_watchhi0() __read_32bit_c0_register($19, 0) #define read_c0_watchhi1() __read_32bit_c0_register($19, 1) diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index d94085a..bc01a02 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -118,6 +118,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "LOONGSON2 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " +#elif defined CONFIG_CPU_XLR +#define MODULE_PROC_FAMILY "XLR " #else #error MODULE_PROC_FAMILY undefined for your processor configuration #endif diff --git a/arch/mips/include/asm/netlogic/interrupt.h b/arch/mips/include/asm/netlogic/interrupt.h new file mode 100644 index 0000000..a85aadb --- /dev/null +++ b/arch/mips/include/asm/netlogic/interrupt.h @@ -0,0 +1,45 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_INTERRUPT_H +#define _ASM_NLM_INTERRUPT_H + +/* Defines for the IRQ numbers */ + +#define IRQ_IPI_SMP_FUNCTION 3 +#define IRQ_IPI_SMP_RESCHEDULE 4 +#define IRQ_MSGRING 6 +#define IRQ_TIMER 7 + +#endif diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h new file mode 100644 index 0000000..8c53d0b --- /dev/null +++ b/arch/mips/include/asm/netlogic/mips-extns.h @@ -0,0 +1,76 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_MIPS_EXTS_H +#define _ASM_NLM_MIPS_EXTS_H + +/* + * XLR and XLP interrupt request and interrupt mask registers + */ +#define read_c0_eirr() __read_64bit_c0_register($9, 6) +#define read_c0_eimr() __read_64bit_c0_register($9, 7) +#define write_c0_eirr(val) __write_64bit_c0_register($9, 6, val) + +/* + * Writing EIMR in 32 bit is a special case, the lower 8 bit of the + * EIMR is shadowed in the status register, so we cannot save and + * restore status register for split read. + */ +#define write_c0_eimr(val) \ +do { \ + if (sizeof(unsigned long) == 4) { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, $9, 7\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + __flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\ + local_irq_restore(__flags); \ + } else \ + __write_64bit_c0_register($9, 7, (val)); \ +} while (0) + +static inline int hard_smp_processor_id(void) +{ + return __read_32bit_c0_register($15, 1) & 0x3ff; +} + +#endif /*_ASM_NLM_MIPS_EXTS_H */ diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h new file mode 100644 index 0000000..6878307 --- /dev/null +++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h @@ -0,0 +1,109 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NETLOGIC_BOOTINFO_H +#define _ASM_NETLOGIC_BOOTINFO_H + +struct psb_info { + uint64_t boot_level; + uint64_t io_base; + uint64_t output_device; + uint64_t uart_print; + uint64_t led_output; + uint64_t init; + uint64_t exit; + uint64_t warm_reset; + uint64_t wakeup; + uint64_t online_cpu_map; + uint64_t master_reentry_sp; + uint64_t master_reentry_gp; + uint64_t master_reentry_fn; + uint64_t slave_reentry_fn; + uint64_t magic_dword; + uint64_t uart_putchar; + uint64_t size; + uint64_t uart_getchar; + uint64_t nmi_handler; + uint64_t psb_version; + uint64_t mac_addr; + uint64_t cpu_frequency; + uint64_t board_version; + uint64_t malloc; + uint64_t free; + uint64_t global_shmem_addr; + uint64_t global_shmem_size; + uint64_t psb_os_cpu_map; + uint64_t userapp_cpu_map; + uint64_t wakeup_os; + uint64_t psb_mem_map; + uint64_t board_major_version; + uint64_t board_minor_version; + uint64_t board_manf_revision; + uint64_t board_serial_number; + uint64_t psb_physaddr_map; + uint64_t xlr_loaderip_config; + uint64_t bldr_envp; + uint64_t avail_mem_map; +}; + +enum { + NETLOGIC_IO_SPACE = 0x10, + PCIX_IO_SPACE, + PCIX_CFG_SPACE, + PCIX_MEMORY_SPACE, + HT_IO_SPACE, + HT_CFG_SPACE, + HT_MEMORY_SPACE, + SRAM_SPACE, + FLASH_CONTROLLER_SPACE +}; + +#define NLM_MAX_ARGS 64 +#define NLM_MAX_ENVS 32 + +/* This is what netlboot passes and linux boot_mem_map is subtly different */ +#define NLM_BOOT_MEM_MAP_MAX 32 +struct nlm_boot_mem_map { + int nr_map; + struct nlm_boot_mem_map_entry { + uint64_t addr; /* start of memory segment */ + uint64_t size; /* size of memory segment */ + uint32_t type; /* type of memory segment */ + } map[NLM_BOOT_MEM_MAP_MAX]; +}; + +/* Pointer to saved boot loader info */ +extern struct psb_info nlm_prom_info; + +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h new file mode 100644 index 0000000..51f6ad4 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/gpio.h @@ -0,0 +1,73 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_GPIO_H +#define _ASM_NLM_GPIO_H + +#define NETLOGIC_GPIO_INT_EN_REG 0 +#define NETLOGIC_GPIO_INPUT_INVERSION_REG 1 +#define NETLOGIC_GPIO_IO_DIR_REG 2 +#define NETLOGIC_GPIO_IO_DATA_WR_REG 3 +#define NETLOGIC_GPIO_IO_DATA_RD_REG 4 + +#define NETLOGIC_GPIO_SWRESET_REG 8 +#define NETLOGIC_GPIO_DRAM1_CNTRL_REG 9 +#define NETLOGIC_GPIO_DRAM1_RATIO_REG 10 +#define NETLOGIC_GPIO_DRAM1_RESET_REG 11 +#define NETLOGIC_GPIO_DRAM1_STATUS_REG 12 +#define NETLOGIC_GPIO_DRAM2_CNTRL_REG 13 +#define NETLOGIC_GPIO_DRAM2_RATIO_REG 14 +#define NETLOGIC_GPIO_DRAM2_RESET_REG 15 +#define NETLOGIC_GPIO_DRAM2_STATUS_REG 16 + +#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG 21 +#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG 24 +#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG 25 +#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG 26 + +#define NETLOGIC_GPIO_FUSE_BANK_REG 35 +#define NETLOGIC_GPIO_CPU_RESET_REG 40 +#define NETLOGIC_GPIO_RNG_REG 43 + +#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT 17 +#define NETLOGIC_GPIO_LED_BITMAP 0x1700000 +#define NETLOGIC_GPIO_LED_0_SHIFT 20 +#define NETLOGIC_GPIO_LED_1_SHIFT 24 + +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET 0x01 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN 0x04 + +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h new file mode 100644 index 0000000..2e3a4dd --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/iomap.h @@ -0,0 +1,131 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_IOMAP_H +#define _ASM_NLM_IOMAP_H + +#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000) +#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000 +#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000 +#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000 +#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000 +#define NETLOGIC_IO_PIC_OFFSET 0x08000 +#define NETLOGIC_IO_UART_0_OFFSET 0x14000 +#define NETLOGIC_IO_UART_1_OFFSET 0x15100 + +#define NETLOGIC_IO_SIZE 0x1000 + +#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000 + +#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000 +#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000 + +#define NETLOGIC_IO_SRAM_OFFSET 0x07000 + +#define NETLOGIC_IO_PCIX_OFFSET 0x09000 +#define NETLOGIC_IO_HT_OFFSET 0x0A000 + +#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000 + +#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000 +#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000 +#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000 +#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000 + +/* XLS devices */ +#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000 +#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000 +#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000 +#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000 + +#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000 +#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000 +#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000 +#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000 + +#define NETLOGIC_IO_USB_0_OFFSET 0x24000 +#define NETLOGIC_IO_USB_1_OFFSET 0x25000 + +#define NETLOGIC_IO_COMP_OFFSET 0x1D000 +/* end XLS devices */ + +/* XLR devices */ +#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000 +#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000 +#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000 +#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000 +/* end XLR devices */ + +#define NETLOGIC_IO_I2C_0_OFFSET 0x16000 +#define NETLOGIC_IO_I2C_1_OFFSET 0x17000 + +#define NETLOGIC_IO_GPIO_OFFSET 0x18000 +#define NETLOGIC_IO_FLASH_OFFSET 0x19000 +#define NETLOGIC_IO_TB_OFFSET 0x1C000 + +#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000) + +/* + * Base Address (Virtual) of the PCI Config address space + * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28) + * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes + * ie 1<<24 = 16M + */ +#define DEFAULT_PCI_CONFIG_BASE 0x18000000 +#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 +#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <asm/byteorder.h> + +typedef volatile __u32 nlm_reg_t; +extern unsigned long netlogic_io_base; + +/* FIXME read once in write_reg */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define netlogic_read_reg(base, offset) ((base)[(offset)]) +#define netlogic_write_reg(base, offset, value) ((base)[(offset)] = (value)) +#else +#define netlogic_read_reg(base, offset) (be32_to_cpu((base)[(offset)])) +#define netlogic_write_reg(base, offset, value) \ + ((base)[(offset)] = cpu_to_be32((value))) +#endif + +#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)])) +#define netlogic_write_reg_le32(base, offset, value) \ + ((base)[(offset)] = cpu_to_le32((value))) +#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset))) +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h new file mode 100644 index 0000000..5cceb74 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -0,0 +1,231 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_XLR_PIC_H +#define _ASM_NLM_XLR_PIC_H + +#define PIC_CLKS_PER_SEC 66666666ULL +/* PIC hardware interrupt numbers */ +#define PIC_IRT_WD_INDEX 0 +#define PIC_IRT_TIMER_0_INDEX 1 +#define PIC_IRT_TIMER_1_INDEX 2 +#define PIC_IRT_TIMER_2_INDEX 3 +#define PIC_IRT_TIMER_3_INDEX 4 +#define PIC_IRT_TIMER_4_INDEX 5 +#define PIC_IRT_TIMER_5_INDEX 6 +#define PIC_IRT_TIMER_6_INDEX 7 +#define PIC_IRT_TIMER_7_INDEX 8 +#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX +#define PIC_IRT_UART_0_INDEX 9 +#define PIC_IRT_UART_1_INDEX 10 +#define PIC_IRT_I2C_0_INDEX 11 +#define PIC_IRT_I2C_1_INDEX 12 +#define PIC_IRT_PCMCIA_INDEX 13 +#define PIC_IRT_GPIO_INDEX 14 +#define PIC_IRT_HYPER_INDEX 15 +#define PIC_IRT_PCIX_INDEX 16 +/* XLS */ +#define PIC_IRT_CDE_INDEX 15 +#define PIC_IRT_BRIDGE_TB_XLS_INDEX 16 +/* XLS */ +#define PIC_IRT_GMAC0_INDEX 17 +#define PIC_IRT_GMAC1_INDEX 18 +#define PIC_IRT_GMAC2_INDEX 19 +#define PIC_IRT_GMAC3_INDEX 20 +#define PIC_IRT_XGS0_INDEX 21 +#define PIC_IRT_XGS1_INDEX 22 +#define PIC_IRT_HYPER_FATAL_INDEX 23 +#define PIC_IRT_PCIX_FATAL_INDEX 24 +#define PIC_IRT_BRIDGE_AERR_INDEX 25 +#define PIC_IRT_BRIDGE_BERR_INDEX 26 +#define PIC_IRT_BRIDGE_TB_XLR_INDEX 27 +#define PIC_IRT_BRIDGE_AERR_NMI_INDEX 28 +/* XLS */ +#define PIC_IRT_GMAC4_INDEX 21 +#define PIC_IRT_GMAC5_INDEX 22 +#define PIC_IRT_GMAC6_INDEX 23 +#define PIC_IRT_GMAC7_INDEX 24 +#define PIC_IRT_BRIDGE_ERR_INDEX 25 +#define PIC_IRT_PCIE_LINK0_INDEX 26 +#define PIC_IRT_PCIE_LINK1_INDEX 27 +#define PIC_IRT_PCIE_LINK2_INDEX 23 +#define PIC_IRT_PCIE_LINK3_INDEX 24 +#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX 28 +#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX 29 +#define PIC_IRT_SRIO_LINK0_INDEX 26 +#define PIC_IRT_SRIO_LINK1_INDEX 27 +#define PIC_IRT_SRIO_LINK2_INDEX 28 +#define PIC_IRT_SRIO_LINK3_INDEX 29 +#define PIC_IRT_PCIE_INT_INDEX 28 +#define PIC_IRT_PCIE_FATAL_INDEX 29 +#define PIC_IRT_GPIO_B_INDEX 30 +#define PIC_IRT_USB_INDEX 31 +/* XLS */ +#define PIC_NUM_IRTS 32 + + +#define PIC_CLOCK_TIMER 7 + +/* PIC Registers */ +#define PIC_CTRL 0x00 +#define PIC_IPI 0x04 +#define PIC_INT_ACK 0x06 + +#define WD_MAX_VAL_0 0x08 +#define WD_MAX_VAL_1 0x09 +#define WD_MASK_0 0x0a +#define WD_MASK_1 0x0b +#define WD_HEARBEAT_0 0x0c +#define WD_HEARBEAT_1 0x0d + +#define PIC_IRT_0_BASE 0x40 +#define PIC_IRT_1_BASE 0x80 +#define PIC_TIMER_MAXVAL_0_BASE 0x100 +#define PIC_TIMER_MAXVAL_1_BASE 0x110 +#define PIC_TIMER_COUNT_0_BASE 0x120 +#define PIC_TIMER_COUNT_1_BASE 0x130 + +#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr)) +#define PIC_IRT_1(picintr) (PIC_IRT_1_BASE + (picintr)) + +#define PIC_TIMER_MAXVAL_0(i) (PIC_TIMER_MAXVAL_0_BASE + (i)) +#define PIC_TIMER_MAXVAL_1(i) (PIC_TIMER_MAXVAL_1_BASE + (i)) +#define PIC_TIMER_COUNT_0(i) (PIC_TIMER_COUNT_0_BASE + (i)) +#define PIC_TIMER_COUNT_1(i) (PIC_TIMER_COUNT_0_BASE + (i)) + +/* + * Mapping between hardware interrupt numbers and IRQs on CPU + * we use a simple scheme to map PIC interrupts 0-31 to IRQs + * 8-39. This leaves the IRQ 0-7 for cpu interrupts like + * count/compare and FMN + */ +#define PIC_IRQ_BASE 8 +#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i)) +#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE) + +#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE +#define PIC_WD_IRQ PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX) +#define PIC_TIMER_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX) +#define PIC_TIMER_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX) +#define PIC_TIMER_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX) +#define PIC_TIMER_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX) +#define PIC_TIMER_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX) +#define PIC_TIMER_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX) +#define PIC_TIMER_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX) +#define PIC_TIMER_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX) +#define PIC_CLOCK_IRQ (PIC_TIMER_7_IRQ) +#define PIC_UART_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX) +#define PIC_UART_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX) +#define PIC_I2C_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX) +#define PIC_I2C_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX) +#define PIC_PCMCIA_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX) +#define PIC_GPIO_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX) +#define PIC_HYPER_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX) +#define PIC_PCIX_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX) +/* XLS */ +#define PIC_CDE_IRQ PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX) +#define PIC_BRIDGE_TB_XLS_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX) +/* end XLS */ +#define PIC_GMAC_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX) +#define PIC_GMAC_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX) +#define PIC_GMAC_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX) +#define PIC_GMAC_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX) +#define PIC_XGS_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX) +#define PIC_XGS_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX) +#define PIC_HYPER_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX) +#define PIC_PCIX_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX) +#define PIC_BRIDGE_AERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX) +#define PIC_BRIDGE_BERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX) +#define PIC_BRIDGE_TB_XLR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX) +#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX) +/* XLS defines */ +#define PIC_GMAC_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX) +#define PIC_GMAC_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX) +#define PIC_GMAC_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX) +#define PIC_GMAC_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX) +#define PIC_BRIDGE_ERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX) +#define PIC_PCIE_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX) +#define PIC_PCIE_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX) +#define PIC_PCIE_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX) +#define PIC_PCIE_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX) +#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX) +#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX) +#define PIC_SRIO_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX) +#define PIC_SRIO_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX) +#define PIC_SRIO_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX) +#define PIC_SRIO_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX) +#define PIC_PCIE_INT_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX) +#define PIC_PCIE_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX) +#define PIC_GPIO_B_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX) +#define PIC_USB_IRQ PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX) +#define PIC_IRT_LAST_IRQ PIC_USB_IRQ +/* end XLS */ + +#ifndef __ASSEMBLY__ +static inline void pic_send_ipi(u32 ipi) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_IPI, ipi); +} + +static inline u32 pic_read_control(void) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + return netlogic_read_reg(mmio, PIC_CTRL); +} + +static inline void pic_write_control(u32 control) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_CTRL, control); +} + +static inline void pic_update_control(u32 control) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_CTRL, + (control | netlogic_read_reg(mmio, PIC_CTRL))); +} + +#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ + ((irq) <= PIC_TIMER_7_IRQ)) +#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ + ((irq) <= PIC_IRT_LAST_IRQ)) +#endif + +#endif /* _ASM_NLM_XLR_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h new file mode 100644 index 0000000..3e63726 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/xlr.h @@ -0,0 +1,75 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_XLR_H +#define _ASM_NLM_XLR_H + +/* Platform UART functions */ +struct uart_port; +unsigned int nlm_xlr_uart_in(struct uart_port *, int); +void nlm_xlr_uart_out(struct uart_port *, int, int); + +/* SMP support functions */ +struct irq_desc; +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); +int nlm_wakeup_secondary_cpus(u32 wakeup_mask); +void nlm_smp_irq_init(void); +void nlm_boot_smp_nmi(void); +void prom_pre_boot_secondary_cpus(void); + +extern struct plat_smp_ops nlm_smp_ops; +extern unsigned long nlm_common_ebase; + +/* XLS B silicon "Rook" */ +static inline unsigned int nlm_chip_is_xls_b(void) +{ + uint32_t prid = read_c0_prid(); + + return ((prid & 0xf000) == 0x4000); +} + +/* + * XLR chip types + */ + /* The XLS product line has chip versions 0x[48c]? */ +static inline unsigned int nlm_chip_is_xls(void) +{ + uint32_t prid = read_c0_prid(); + + return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 || + (prid & 0xf000) == 0xc000); +} + +#endif /* _ASM_NLM_XLR_H */ diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h index f3c23a4..4e4c3a8 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h @@ -200,7 +200,7 @@ enum cvmx_chip_types_enum { CVMX_CHIP_TYPE_MAX, }; -/* Compatability alias for NAC38 name change, planned to be removed +/* Compatibility alias for NAC38 name change, planned to be removed * from SDK 1.7 */ #define CVMX_BOARD_TYPE_NAO38 CVMX_BOARD_TYPE_NAC38 diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h index 8e708bd..877845b 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootmem.h +++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h @@ -67,7 +67,7 @@ struct cvmx_bootmem_block_header { /* * Structure for named memory blocks. Number of descriptors available - * can be changed without affecting compatiblity, but name length + * can be changed without affecting compatibility, but name length * changes require a bump in the bootmem descriptor version Note: This * structure must be naturally 64 bit aligned, as a single memory * image will be used by both 32 and 64 bit programs. diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h index 0b32c5b..2c8ff9e 100644 --- a/arch/mips/include/asm/octeon/cvmx-l2c.h +++ b/arch/mips/include/asm/octeon/cvmx-l2c.h @@ -157,7 +157,7 @@ enum cvmx_l2c_tad_event { /** * Configure one of the four L2 Cache performance counters to capture event - * occurences. + * occurrences. * * @counter: The counter to configure. Range 0..3. * @event: The type of L2 Cache event occurrence to count. diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index 9d9381e..7e12867 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -151,7 +151,7 @@ enum cvmx_mips_space { #endif /** - * Convert a memory pointer (void*) into a hardware compatable + * Convert a memory pointer (void*) into a hardware compatible * memory address (uint64_t). Octeon hardware widgets don't * understand logical addresses. * diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h index c2394f8..9ce5a1e 100644 --- a/arch/mips/include/asm/paccess.h +++ b/arch/mips/include/asm/paccess.h @@ -7,7 +7,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * * Protected memory access. Used for everything that might take revenge - * by sending a DBE error like accessing possibly non-existant memory or + * by sending a DBE error like accessing possibly non-existent memory or * devices. */ #ifndef _ASM_PACCESS_H diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index f1f508e..be44fb0 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -262,7 +262,7 @@ typedef volatile struct bridge_s { } bridge_t; /* - * Field formats for Error Command Word and Auxillary Error Command Word + * Field formats for Error Command Word and Auxiliary Error Command Word * of bridge. */ typedef struct bridge_err_cmdword_s { diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h index 60a5a38..7d41474 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h @@ -205,7 +205,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr) * custom_read_reg32(address, tmp); <-- Reads the address and put the value * in the 'tmp' variable given * - * From here on out, you are (basicly) atomic, so don't do anything too + * From here on out, you are (basically) atomic, so don't do anything too * fancy! * Also, this code may loop if the end of this block fails to write * everything back safely due do the other CPU, so do NOT do anything diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index ead6928..c104f10 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -337,7 +337,7 @@ unsigned long get_wchan(struct task_struct *p); /* * Return_address is a replacement for __builtin_return_address(count) * which on certain architectures cannot reasonably be implemented in GCC - * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). + * (MIPS, Alpha) or is unusable with -fomit-frame-pointer (i386). * Note that __builtin_return_address(x>=1) is forbidden because GCC * aborts compilation on some CPUs. It's simply not possible to unwind * some CPU's stackframes. diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 9f1b8db..de39b1f 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -141,7 +141,8 @@ extern int ptrace_set_watch_regs(struct task_struct *child, #define instruction_pointer(regs) ((regs)->cp0_epc) #define profile_pc(regs) instruction_pointer(regs) -extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); +extern asmlinkage void syscall_trace_enter(struct pt_regs *regs); +extern asmlinkage void syscall_trace_leave(struct pt_regs *regs); extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 57a9719..380347b 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -17,7 +17,7 @@ #include <asm/sgi/pi1.h> /* - * All registers are 8-bit wide alligned on 32-bit boundary. Bad things + * All registers are 8-bit wide aligned on 32-bit boundary. Bad things * happen if you try word access them. You have been warned. */ diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index 591b906..77f7872 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -520,7 +520,7 @@ #define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) /* - * MAC Recieve Address Filter Exact Match Registers (Table 9-21) + * MAC Receive Address Filter Exact Match Registers (Table 9-21) * Registers: MAC_ADDR0_0 through MAC_ADDR7_0 * Registers: MAC_ADDR0_1 through MAC_ADDR7_1 * Registers: MAC_ADDR0_2 through MAC_ADDR7_2 @@ -538,7 +538,7 @@ /* No bitfields */ /* - * MAC Recieve Address Filter Hash Match Registers (Table 9-22) + * MAC Receive Address Filter Hash Match Registers (Table 9-22) * Registers: MAC_HASH0_0 through MAC_HASH7_0 * Registers: MAC_HASH0_1 through MAC_HASH7_1 * Registers: MAC_HASH0_2 through MAC_HASH7_2 diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h index 1ca64b4..20ebeb8 100644 --- a/arch/mips/include/asm/siginfo.h +++ b/arch/mips/include/asm/siginfo.h @@ -101,7 +101,7 @@ typedef struct siginfo { /* * si_code values - * Again these have been choosen to be IRIX compatible. + * Again these have been chosen to be IRIX compatible. */ #undef SI_ASYNCIO #undef SI_TIMER diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h index 09e590d..fe02900 100644 --- a/arch/mips/include/asm/sn/klconfig.h +++ b/arch/mips/include/asm/sn/klconfig.h @@ -78,7 +78,7 @@ typedef s32 klconf_off_t; */ #define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) -/* XXX if each node is guranteed to have some memory */ +/* XXX if each node is guaranteed to have some memory */ #define MAX_PCI_DEVS 8 @@ -539,7 +539,7 @@ typedef struct klinfo_s { /* Generic info */ #define KLSTRUCT_IOC3_TTY 24 /* Early Access IO proms are compatible - only with KLSTRUCT values upto 24. */ + only with KLSTRUCT values up to 24. */ #define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index 31c76c0..46286d8 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -622,7 +622,7 @@ typedef union h1_icrbb_u { */ #define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ #define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ -#define IIO_ICRB_GB_REQ 2 /* Source is Guranteed BW request */ +#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ #define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ /* diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 58730c5..b4ba244 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -346,7 +346,7 @@ * we can't dispatch it directly without trashing * some registers, so we'll try to detect this unlikely * case and program a software interrupt in the VPE, - * as would be done for a cross-VPE IPI. To accomodate + * as would be done for a cross-VPE IPI. To accommodate * the handling of that case, we're doing a DVPE instead * of just a DMT here to protect against other threads. * This is a lot of cruft to cover a tiny window. diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index d71160d..97f8bf6 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -149,6 +149,9 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_FPUBOUND (1<<TIF_FPUBOUND) #define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH) +/* work to do in syscall_trace_leave() */ +#define _TIF_WORK_SYSCALL_EXIT (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) + /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (0x0000ffef & \ ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT)) diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index c7f1bfe..bc14447 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void) #endif } -static inline void clocksource_set_clock(struct clocksource *cs, - unsigned int clock) -{ - clocksource_calc_mult_shift(cs, clock, 4); -} - static inline void clockevent_set_clock(struct clock_event_device *cd, unsigned int clock) { diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h index 22361d5..fa133c1 100644 --- a/arch/mips/include/asm/war.h +++ b/arch/mips/include/asm/war.h @@ -227,7 +227,7 @@ #endif /* - * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that + * On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that * may cause ll / sc and lld / scd sequences to execute non-atomically. */ #ifndef R10000_LLSC_WAR diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index 9ce9f64..2d8e447 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free); */ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) { - int first, pages, npages; + int first, pages; if (laddr > 0xffffff) { if (vdma_debug) @@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) return -EINVAL; /* invalid physical address */ } - npages = pages = - (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; + pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; first = laddr >> 12; if (vdma_debug) printk("vdma_remap: first=%x, pages=%x\n", first, pages); diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index bc18daa..c3b04be 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = { }; /* Early prototypes of the QI LB60 had only 1GB of NAND. - * In order to support these devices aswell the partition and ecc layout is + * In order to support these devices as well the partition and ecc layout is * initialized depending on the NAND size */ static struct mtd_partition qi_lb60_partitions_1gb[] = { { @@ -439,7 +439,7 @@ static struct platform_device *jz_platform_devices[] __initdata = { static void __init board_gpio_setup(void) { /* We only need to enable/disable pullup here for pins used in generic - * drivers. Everything else is done by the drivers themselfs. */ + * drivers. Everything else is done by the drivers themselves. */ jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N); jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD); } diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c index 5ebe75a..d7feb89 100644 --- a/arch/mips/jz4740/dma.c +++ b/arch/mips/jz4740/dma.c @@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue); static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma) { - uint32_t status; - - status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); + (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0, JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE); diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index 6a9e14d..d97cfbf 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org> * JZ4740 setup code * * This program is free software; you can redistribute it and/or modify it @@ -14,13 +15,44 @@ */ #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> +#include <asm/bootinfo.h> + +#include <asm/mach-jz4740/base.h> + #include "reset.h" + +#define JZ4740_EMC_SDRAM_CTRL 0x80 + + +static void __init jz4740_detect_mem(void) +{ + void __iomem *jz_emc_base; + u32 ctrl, bus, bank, rows, cols; + phys_t size; + + jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100); + ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL); + bus = 2 - ((ctrl >> 31) & 1); + bank = 1 + ((ctrl >> 19) & 1); + cols = 8 + ((ctrl >> 26) & 7); + rows = 11 + ((ctrl >> 20) & 3); + printk(KERN_DEBUG + "SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n", + bus, bank, rows, cols); + iounmap(jz_emc_base); + + size = 1 << (bus + bank + cols + rows); + add_memory_region(0, size, BOOT_MEM_RAM); +} + void __init plat_mem_setup(void) { jz4740_reset_init(); + jz4740_detect_mem(); } const char *get_system_type(void) diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c index fe01678..f83c2dd 100644 --- a/arch/mips/jz4740/time.c +++ b/arch/mips/jz4740/time.c @@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt, static struct clock_event_device jz4740_clockevent = { .name = "jz4740-timer", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = jz4740_clockevent_set_next, .set_mode = jz4740_clockevent_set_mode, .rating = 200, @@ -121,8 +121,7 @@ void __init plat_time_init(void) clockevents_register_device(&jz4740_clockevent); - clocksource_set_clock(&jz4740_clocksource, clk_rate); - ret = clocksource_register(&jz4740_clocksource); + ret = clocksource_register_hz(&jz4740_clocksource, clk_rate); if (ret) printk(KERN_ERR "Failed to register clocksource: %d\n", ret); diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c index b2c0151..654d5c3 100644 --- a/arch/mips/jz4740/timer.c +++ b/arch/mips/jz4740/timer.c @@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); } +EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog); void jz4740_timer_disable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); } +EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog); void __init jz4740_timer_init(void) { diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cedee2b..83bba33 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o +obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP_UP) += smp-up.o diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 0b73773..f0ab92a 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr, { struct txx9_tmr_reg __iomem *tmrptr; - clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); - clocksource_register(&txx9_clocksource.cs); + clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); __raw_writel(TCR_BASE, &tmrptr->tcr); diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index b8bb8ba..f305ca1 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -73,7 +73,7 @@ static inline void mult_sh_align_mod(long *v1, long *v2, long *w, : "0" (5), "1" (8), "2" (5)); align_mod(align, mod); /* - * The trailing nop is needed to fullfill the two-instruction + * The trailing nop is needed to fulfill the two-instruction * requirement between reading hi/lo and staring a mult/div. * Leaving it out may cause gas insert a nop itself breaking * the desired alignment of the next chunk. diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f65d4c8..bb133d1 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -291,6 +291,12 @@ static inline int cpu_has_confreg(void) #endif } +static inline void set_elf_platform(int cpu, const char *plat) +{ + if (cpu == 0) + __elf_platform = plat; +} + /* * Get the FPU Implementation/Revision. */ @@ -614,6 +620,16 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_LOONGSON2: c->cputype = CPU_LOONGSON2; __cpu_name[cpu] = "ICT Loongson-2"; + + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + set_elf_platform(cpu, "loongson2e"); + break; + case PRID_REV_LOONGSON2F: + set_elf_platform(cpu, "loongson2f"); + break; + } + c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC | @@ -911,12 +927,14 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_BMIPS32_REV8: c->cputype = CPU_BMIPS32; __cpu_name[cpu] = "Broadcom BMIPS32"; + set_elf_platform(cpu, "bmips32"); break; case PRID_IMP_BMIPS3300: case PRID_IMP_BMIPS3300_ALT: case PRID_IMP_BMIPS3300_BUG: c->cputype = CPU_BMIPS3300; __cpu_name[cpu] = "Broadcom BMIPS3300"; + set_elf_platform(cpu, "bmips3300"); break; case PRID_IMP_BMIPS43XX: { int rev = c->processor_id & 0xff; @@ -925,15 +943,18 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) rev <= PRID_REV_BMIPS4380_HI) { c->cputype = CPU_BMIPS4380; __cpu_name[cpu] = "Broadcom BMIPS4380"; + set_elf_platform(cpu, "bmips4380"); } else { c->cputype = CPU_BMIPS4350; __cpu_name[cpu] = "Broadcom BMIPS4350"; + set_elf_platform(cpu, "bmips4350"); } break; } case PRID_IMP_BMIPS5000: c->cputype = CPU_BMIPS5000; __cpu_name[cpu] = "Broadcom BMIPS5000"; + set_elf_platform(cpu, "bmips5000"); c->options |= MIPS_CPU_ULRI; break; } @@ -956,14 +977,12 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_CAVIUM_OCTEON_PLUS; __cpu_name[cpu] = "Cavium Octeon+"; platform: - if (cpu == 0) - __elf_platform = "octeon"; + set_elf_platform(cpu, "octeon"); break; case PRID_IMP_CAVIUM_CN63XX: c->cputype = CPU_CAVIUM_OCTEON2; __cpu_name[cpu] = "Cavium Octeon II"; - if (cpu == 0) - __elf_platform = "octeon2"; + set_elf_platform(cpu, "octeon2"); break; default: printk(KERN_INFO "Unknown Octeon chip!\n"); @@ -988,6 +1007,59 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) } } +static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) +{ + decode_configs(c); + + c->options = (MIPS_CPU_TLB | + MIPS_CPU_4KEX | + MIPS_CPU_COUNTER | + MIPS_CPU_DIVEC | + MIPS_CPU_WATCH | + MIPS_CPU_EJTAG | + MIPS_CPU_LLSC); + + switch (c->processor_id & 0xff00) { + case PRID_IMP_NETLOGIC_XLR732: + case PRID_IMP_NETLOGIC_XLR716: + case PRID_IMP_NETLOGIC_XLR532: + case PRID_IMP_NETLOGIC_XLR308: + case PRID_IMP_NETLOGIC_XLR532C: + case PRID_IMP_NETLOGIC_XLR516C: + case PRID_IMP_NETLOGIC_XLR508C: + case PRID_IMP_NETLOGIC_XLR308C: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLR"; + break; + + case PRID_IMP_NETLOGIC_XLS608: + case PRID_IMP_NETLOGIC_XLS408: + case PRID_IMP_NETLOGIC_XLS404: + case PRID_IMP_NETLOGIC_XLS208: + case PRID_IMP_NETLOGIC_XLS204: + case PRID_IMP_NETLOGIC_XLS108: + case PRID_IMP_NETLOGIC_XLS104: + case PRID_IMP_NETLOGIC_XLS616B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS412B: + case PRID_IMP_NETLOGIC_XLS408B: + case PRID_IMP_NETLOGIC_XLS404B: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLS"; + break; + + default: + printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n", + c->processor_id); + c->cputype = CPU_XLR; + break; + } + + c->isa_level = MIPS_CPU_ISA_M64R1; + c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; +} + #ifdef CONFIG_64BIT /* For use by uaccess.h */ u64 __ua_limit; @@ -1035,6 +1107,9 @@ __cpuinit void cpu_probe(void) case PRID_COMP_INGENIC: cpu_probe_ingenic(c, cpu); break; + case PRID_COMP_NETLOGIC: + cpu_probe_netlogic(c, cpu); + break; } BUG_ON(!__cpu_name[cpu]); diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c index 51489f8..f96f99c 100644 --- a/arch/mips/kernel/csrc-bcm1480.c +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void) plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000); - clocksource_set_clock(cs, zbbus); - clocksource_register(cs); + clocksource_register_hz(cs, zbbus); } diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index 23da108..46bd7fa 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void) printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); clocksource_dec.rating = 200 + freq / 10000000; - clocksource_set_clock(&clocksource_dec, freq); - - clocksource_register(&clocksource_dec); + clocksource_register_hz(&clocksource_dec, freq); } diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c index a27c16c..2e7c523 100644 --- a/arch/mips/kernel/csrc-powertv.c +++ b/arch/mips/kernel/csrc-powertv.c @@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void) clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); - - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); } /** @@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = { /** * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock * - * The hard part here is coming up with a constant k and shift s such that - * the 48-bit TIM_C value multiplied by k doesn't overflow and that value, - * when shifted right by s, yields the corresponding number of nanoseconds. * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to - * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the - * number of nanoseconds. Since the TIM_C value has 48 bits and the math is - * done in 64 bits, avoiding an overflow means that k must be less than - * 64 - 48 = 16 bits. + * 1 / (27,000,000/8) seconds. */ static void __init powertv_tim_c_clocksource_init(void) { - int prescale; - unsigned long dividend; - unsigned long k; - int s; - const int max_k_bits = (64 - 48) - 1; - const unsigned long billion = 1000000000; const unsigned long counts_per_second = 27000000 / 8; - prescale = BITS_PER_LONG - ilog2(billion) - 1; - dividend = billion << prescale; - k = dividend / counts_per_second; - s = ilog2(k) - max_k_bits; - - if (s < 0) - s = prescale; - - else { - k >>= s; - s += prescale; - } - - clocksource_tim_c.mult = k; - clocksource_tim_c.shift = s; clocksource_tim_c.rating = 200; - clocksource_register(&clocksource_tim_c); + clocksource_register_hz(&clocksource_tim_c, counts_per_second); tim_c = (struct tim_c *) asic_reg_addr(tim_ch); } diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index e95a3cd..decd1fa 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void) /* Calculate a somewhat reasonable rating value */ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); - - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); return 0; } diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c index d14d3d1..e9606d9 100644 --- a/arch/mips/kernel/csrc-sb1250.c +++ b/arch/mips/kernel/csrc-sb1250.c @@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void) IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - clocksource_set_clock(cs, V_SCD_TIMER_FREQ); - clocksource_register(cs); + clocksource_register_hz(cs, V_SCD_TIMER_FREQ); } diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index ffa3310..37acfa0 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -167,14 +167,13 @@ work_notifysig: # deal with pending signals and FEXPORT(syscall_exit_work_partial) SAVE_STATIC syscall_exit_work: - li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT + li t0, _TIF_WORK_SYSCALL_EXIT and t0, a2 # a2 is preloaded with TI_FLAGS beqz t0, work_pending # trace bit set? - local_irq_enable # could let do_syscall_trace() + local_irq_enable # could let syscall_trace_leave() # call schedule() instead move a0, sp - li a1, 1 - jal do_syscall_trace + jal syscall_trace_leave b resume_userspace #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT) diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 94ca2b0..feb8021 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -23,6 +23,7 @@ #define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ #define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define JUMP_RANGE_MASK ((1UL << 28) - 1) #define INSN_NOP 0x00000000 /* nop */ #define INSN_JAL(addr) \ @@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void) /* jal (ftrace_caller + 8), jump over the first two instruction */ buf = (u32 *)&insn_jal_ftrace_caller; - uasm_i_jal(&buf, (FTRACE_ADDR + 8)); + uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK); #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* j ftrace_graph_caller */ buf = (u32 *)&insn_j_ftrace_graph_caller; - uasm_i_j(&buf, (unsigned long)ftrace_graph_caller); + uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK); #endif } diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 2392a7a2..391221b 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -125,87 +125,11 @@ void __init setup_pit_timer(void) setup_irq(0, &irq0); } -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) { - count = old_count; - } - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource clocksource_pit = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - static int __init init_pit_clocksource(void) { if (num_possible_cpus() > 1) /* PIT does not scale! */ return 0; - clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); - return clocksource_register(&clocksource_pit); + return clocksource_i8253_init(); } arch_initcall(init_pit_clocksource); diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index d9a7db7..75266ff 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -721,7 +721,7 @@ static void mipsxx_pmu_start(void) /* * MIPS performance counters can be per-TC. The control registers can - * not be directly accessed accross CPUs. Hence if we want to do global + * not be directly accessed across CPUs. Hence if we want to do global * control, we need cross CPU calls. on_each_cpu() can help us, but we * can not make sure this function is called with interrupts enabled. So * here we pause local counters and then grab a rwlock and leave the diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ae167df..d2112d3 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -410,7 +410,7 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, if (!kallsyms_lookup_size_offset(pc, &size, &ofs)) return 0; /* - * Return ra if an exception occured at the first instruction + * Return ra if an exception occurred at the first instruction */ if (unlikely(ofs == 0)) { pc = *ra; diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index d21c388..4e6ea1f 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -533,15 +533,10 @@ static inline int audit_arch(void) * Notification of system call entry/exit * - triggered by current->work.syscall_trace */ -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage void syscall_trace_enter(struct pt_regs *regs) { /* do the secure computing check first */ - if (!entryexit) - secure_computing(regs->regs[2]); - - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]), - regs->regs[2]); + secure_computing(regs->regs[2]); if (!(current->ptrace & PT_PTRACED)) goto out; @@ -565,8 +560,40 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) } out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(audit_arch(), regs->regs[2], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); } + +/* + * Notification of system call entry/exit + * - triggered by current->work.syscall_trace + */ +asmlinkage void syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]), + -regs->regs[2]); + + if (!(current->ptrace & PT_PTRACED)) + return; + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + /* The 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? + 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 7f5468b..7a8e1dd 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -88,8 +88,7 @@ syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -565,7 +564,7 @@ einval: li v0, -ENOSYS sys sys_ioprio_get 2 /* 4315 */ sys sys_utimensat 4 sys sys_signalfd 3 - sys sys_ni_syscall 0 + sys sys_ni_syscall 0 /* was timerfd */ sys sys_eventfd 1 sys sys_fallocate 6 /* 4320 */ sys sys_timerfd_create 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a2e1fcb..2d31c83 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -91,8 +91,7 @@ syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -404,7 +403,7 @@ sys_call_table: PTR sys_ioprio_get PTR sys_utimensat /* 5275 */ PTR sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create /* 5280 */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index b2c7624..38a0503 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -89,8 +89,7 @@ n32_syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -403,7 +402,7 @@ EXPORT(sysn32_call_table) PTR sys_ioprio_get PTR compat_sys_utimensat PTR compat_sys_signalfd /* 6280 */ - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 049a9c8..91ea5e4 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -123,8 +123,7 @@ trace_a_syscall: move s0, t2 # Save syscall pointer move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -522,7 +521,7 @@ sys_call_table: PTR sys_ioprio_get /* 4315 */ PTR compat_sys_utimensat PTR compat_sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index c0e8141..1ec56e6 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -120,7 +120,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action) local_irq_save(flags); - vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ + vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */ switch (action) { case SMP_CALL_FUNCTION: diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 5a88cc4..cedac46 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -929,7 +929,7 @@ static void post_direct_ipi(int cpu, struct smtc_ipi *pipi) static void ipi_resched_interrupt(void) { - /* Return from interrupt should be enough to cause scheduler check */ + scheduler_ipi(); } static void ipi_call_interrupt(void) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 58beabf..d027657 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -10,12 +10,9 @@ #include <linux/capability.h> #include <linux/errno.h> #include <linux/linkage.h> -#include <linux/mm.h> #include <linux/fs.h> #include <linux/smp.h> -#include <linux/mman.h> #include <linux/ptrace.h> -#include <linux/sched.h> #include <linux/string.h> #include <linux/syscalls.h> #include <linux/file.h> @@ -25,11 +22,9 @@ #include <linux/msg.h> #include <linux/shm.h> #include <linux/compiler.h> -#include <linux/module.h> #include <linux/ipc.h> #include <linux/uaccess.h> #include <linux/slab.h> -#include <linux/random.h> #include <linux/elf.h> #include <asm/asm.h> @@ -66,121 +61,6 @@ out: return res; } -unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ - -EXPORT_SYMBOL(shm_align_mask); - -#define COLOUR_ALIGN(addr,pgoff) \ - ((((addr) + shm_align_mask) & ~shm_align_mask) + \ - (((pgoff) << PAGE_SHIFT) & shm_align_mask)) - -unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) -{ - struct vm_area_struct * vmm; - int do_color_align; - unsigned long task_size; - -#ifdef CONFIG_32BIT - task_size = TASK_SIZE; -#else /* Must be CONFIG_64BIT*/ - task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE; -#endif - - if (len > task_size) - return -ENOMEM; - - if (flags & MAP_FIXED) { - /* Even MAP_FIXED mappings must reside within task_size. */ - if (task_size - len < addr) - return -EINVAL; - - /* - * We do not accept a shared mapping if it would violate - * cache aliasing constraints. - */ - if ((flags & MAP_SHARED) && - ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) - return -EINVAL; - return addr; - } - - do_color_align = 0; - if (filp || (flags & MAP_SHARED)) - do_color_align = 1; - if (addr) { - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - vmm = find_vma(current->mm, addr); - if (task_size - len >= addr && - (!vmm || addr + len <= vmm->vm_start)) - return addr; - } - addr = current->mm->mmap_base; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { - /* At this point: (!vmm || addr < vmm->vm_end). */ - if (task_size - len < addr) - return -ENOMEM; - if (!vmm || addr + len <= vmm->vm_start) - return addr; - addr = vmm->vm_end; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - } -} - -void arch_pick_mmap_layout(struct mm_struct *mm) -{ - unsigned long random_factor = 0UL; - - if (current->flags & PF_RANDOMIZE) { - random_factor = get_random_int(); - random_factor = random_factor << PAGE_SHIFT; - if (TASK_IS_32BIT_ADDR) - random_factor &= 0xfffffful; - else - random_factor &= 0xffffffful; - } - - mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; - mm->get_unmapped_area = arch_get_unmapped_area; - mm->unmap_area = arch_unmap_area; -} - -static inline unsigned long brk_rnd(void) -{ - unsigned long rnd = get_random_int(); - - rnd = rnd << PAGE_SHIFT; - /* 8MB for 32bit, 256MB for 64bit */ - if (TASK_IS_32BIT_ADDR) - rnd = rnd & 0x7ffffful; - else - rnd = rnd & 0xffffffful; - - return rnd; -} - -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - unsigned long base = mm->brk; - unsigned long ret; - - ret = PAGE_ALIGN(base + brk_rnd()); - - if (ret < mm->brk) - return mm->brk; - - return ret; -} - SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, off_t, offset) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index fb74974..1083ad4 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -102,7 +102,7 @@ static __init int cpu_has_mfc0_count_bug(void) case CPU_R4400SC: case CPU_R4400MC: /* - * The published errata for the R4400 upto 3.0 say the CPU + * The published errata for the R4400 up to 3.0 say the CPU * has the mfc0 from count bug. */ if ((current_cpu_data.processor_id & 0xff) <= 0x30) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 71350f7..e9b3af2 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs) unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ - notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV); + if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) + sig = 0; console_verbose(); spin_lock_irq(&die_lock); @@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs) mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ - if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) - sig = 0; - printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 832afbb..cd2ca54 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -68,12 +68,14 @@ SECTIONS RODATA /* writeable */ + _sdata = .; /* Start of data section */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ INIT_TASK_DATA(PAGE_SIZE) NOSAVE_DATA CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) DATA_DATA CONSTRUCTORS } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index ab52b7c..dbb6b40 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -19,7 +19,7 @@ * VPE support module * * Provides support for loading a MIPS SP program on VPE1. - * The SP enviroment is rather simple, no tlb's. It needs to be relocatable + * The SP environment is rather simple, no tlb's. It needs to be relocatable * (or partially linked). You should initialise your stack in the startup * code. This loader looks for the symbol __start and sets up * execution to resume from there. The MIPS SDE kit contains suitable examples. diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig new file mode 100644 index 0000000..3fccf21 --- /dev/null +++ b/arch/mips/lantiq/Kconfig @@ -0,0 +1,23 @@ +if LANTIQ + +config SOC_TYPE_XWAY + bool + default n + +choice + prompt "SoC Type" + default SOC_XWAY + +config SOC_AMAZON_SE + bool "Amazon SE" + select SOC_TYPE_XWAY + +config SOC_XWAY + bool "XWAY" + select SOC_TYPE_XWAY + select HW_HAS_PCI +endchoice + +source "arch/mips/lantiq/xway/Kconfig" + +endif diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile new file mode 100644 index 0000000..e5dae0e --- /dev/null +++ b/arch/mips/lantiq/Makefile @@ -0,0 +1,11 @@ +# Copyright (C) 2010 John Crispin <blogic@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o clk.o prom.o devices.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_SOC_TYPE_XWAY) += xway/ diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform new file mode 100644 index 0000000..f3dff05 --- /dev/null +++ b/arch/mips/lantiq/Platform @@ -0,0 +1,8 @@ +# +# Lantiq +# + +platform-$(CONFIG_LANTIQ) += lantiq/ +cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq +load-$(CONFIG_LANTIQ) = 0xffffffff80002000 +cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c new file mode 100644 index 0000000..9456089 --- /dev/null +++ b/arch/mips/lantiq/clk.c @@ -0,0 +1,140 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/list.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +#include "clk.h" + +struct clk { + const char *name; + unsigned long rate; + unsigned long (*get_rate) (void); +}; + +static struct clk *cpu_clk; +static int cpu_clk_cnt; + +/* lantiq socs have 3 static clocks */ +static struct clk cpu_clk_generic[] = { + { + .name = "cpu", + .get_rate = ltq_get_cpu_hz, + }, { + .name = "fpi", + .get_rate = ltq_get_fpi_hz, + }, { + .name = "io", + .get_rate = ltq_get_io_region_clock, + }, +}; + +static struct resource ltq_cgu_resource = { + .name = "cgu", + .start = LTQ_CGU_BASE_ADDR, + .end = LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped clock register range */ +void __iomem *ltq_cgu_membase; + +void clk_init(void) +{ + cpu_clk = cpu_clk_generic; + cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic); +} + +static inline int clk_good(struct clk *clk) +{ + return clk && !IS_ERR(clk); +} + +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->get_rate != NULL) + return clk->get_rate(); + + return 0; +} +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + int i; + + for (i = 0; i < cpu_clk_cnt; i++) + if (!strcmp(id, cpu_clk[i].name)) + return &cpu_clk[i]; + BUG(); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + /* not used */ +} +EXPORT_SYMBOL(clk_put); + +static inline u32 ltq_get_counter_resolution(void) +{ + u32 res; + + __asm__ __volatile__( + ".set push\n" + ".set mips32r2\n" + "rdhwr %0, $3\n" + ".set pop\n" + : "=&r" (res) + : /* no input */ + : "memory"); + + return res; +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + if (insert_resource(&iomem_resource, <q_cgu_resource) < 0) + panic("Failed to insert cgu memory\n"); + + if (request_mem_region(ltq_cgu_resource.start, + resource_size(<q_cgu_resource), "cgu") < 0) + panic("Failed to request cgu memory\n"); + + ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start, + resource_size(<q_cgu_resource)); + if (!ltq_cgu_membase) { + pr_err("Failed to remap cgu memory\n"); + unreachable(); + } + clk = clk_get(0, "cpu"); + mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution(); + write_c0_compare(read_c0_count()); + clk_put(clk); +} diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h new file mode 100644 index 0000000..3328925 --- /dev/null +++ b/arch/mips/lantiq/clk.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_CLK_H__ +#define _LTQ_CLK_H__ + +extern void clk_init(void); + +extern unsigned long ltq_get_cpu_hz(void); +extern unsigned long ltq_get_fpi_hz(void); +extern unsigned long ltq_get_io_region_clock(void); + +#endif diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c new file mode 100644 index 0000000..7b82c34 --- /dev/null +++ b/arch/mips/lantiq/devices.c @@ -0,0 +1,122 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> + +#include "devices.h" + +/* nor flash */ +static struct resource ltq_nor_resource = { + .name = "nor", + .start = LTQ_FLASH_START, + .end = LTQ_FLASH_START + LTQ_FLASH_MAX - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ltq_nor = { + .name = "ltq_nor", + .resource = <q_nor_resource, + .num_resources = 1, +}; + +void __init ltq_register_nor(struct physmap_flash_data *data) +{ + ltq_nor.dev.platform_data = data; + platform_device_register(<q_nor); +} + +/* watchdog */ +static struct resource ltq_wdt_resource = { + .name = "watchdog", + .start = LTQ_WDT_BASE_ADDR, + .end = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +void __init ltq_register_wdt(void) +{ + platform_device_register_simple("ltq_wdt", 0, <q_wdt_resource, 1); +} + +/* asc ports */ +static struct resource ltq_asc0_resources[] = { + { + .name = "asc0", + .start = LTQ_ASC0_BASE_ADDR, + .end = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_TIR(0)), + IRQ_RES(rx, LTQ_ASC_RIR(0)), + IRQ_RES(err, LTQ_ASC_EIR(0)), +}; + +static struct resource ltq_asc1_resources[] = { + { + .name = "asc1", + .start = LTQ_ASC1_BASE_ADDR, + .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_TIR(1)), + IRQ_RES(rx, LTQ_ASC_RIR(1)), + IRQ_RES(err, LTQ_ASC_EIR(1)), +}; + +void __init ltq_register_asc(int port) +{ + switch (port) { + case 0: + platform_device_register_simple("ltq_asc", 0, + ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources)); + break; + case 1: + platform_device_register_simple("ltq_asc", 1, + ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources)); + break; + default: + break; + } +} + +#ifdef CONFIG_PCI +/* pci */ +static struct platform_device ltq_pci = { + .name = "ltq_pci", + .num_resources = 0, +}; + +void __init ltq_register_pci(struct ltq_pci_data *data) +{ + ltq_pci.dev.platform_data = data; + platform_device_register(<q_pci); +} +#else +void __init ltq_register_pci(struct ltq_pci_data *data) +{ + pr_err("kernel is compiled without PCI support\n"); +} +#endif diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h new file mode 100644 index 0000000..2947bb1 --- /dev/null +++ b/arch/mips/lantiq/devices.h @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEVICES_H__ +#define _LTQ_DEVICES_H__ + +#include <lantiq_platform.h> +#include <linux/mtd/physmap.h> + +#define IRQ_RES(resname, irq) \ + {.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ} + +extern void ltq_register_nor(struct physmap_flash_data *data); +extern void ltq_register_wdt(void); +extern void ltq_register_asc(int port); +extern void ltq_register_pci(struct ltq_pci_data *data); + +#endif diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c new file mode 100644 index 0000000..972e05f --- /dev/null +++ b/arch/mips/lantiq/early_printk.c @@ -0,0 +1,33 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/cpu.h> + +#include <lantiq.h> +#include <lantiq_soc.h> + +/* no ioremap possible at this early stage, lets use KSEG1 instead */ +#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR) +#define ASC_BUF 1024 +#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048)) +#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020)) +#define TXMASK 0x3F00 +#define TXOFFSET 8 + +void prom_putchar(char c) +{ + unsigned long flags; + + local_irq_save(flags); + do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET); + if (c == '\n') + ltq_w32('\r', LTQ_ASC_TBUF); + ltq_w32(c, LTQ_ASC_TBUF); + local_irq_restore(flags); +} diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c new file mode 100644 index 0000000..fc89795 --- /dev/null +++ b/arch/mips/lantiq/irq.c @@ -0,0 +1,326 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/bootinfo.h> +#include <asm/irq_cpu.h> + +#include <lantiq_soc.h> +#include <irq.h> + +/* register definitions */ +#define LTQ_ICU_IM0_ISR 0x0000 +#define LTQ_ICU_IM0_IER 0x0008 +#define LTQ_ICU_IM0_IOSR 0x0010 +#define LTQ_ICU_IM0_IRSR 0x0018 +#define LTQ_ICU_IM0_IMR 0x0020 +#define LTQ_ICU_IM1_ISR 0x0028 +#define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR) + +#define LTQ_EIU_EXIN_C 0x0000 +#define LTQ_EIU_EXIN_INIC 0x0004 +#define LTQ_EIU_EXIN_INEN 0x000C + +/* irq numbers used by the external interrupt unit (EIU) */ +#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30) +#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31) +#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26) +#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0 +#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1) +#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2) +#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30) + +#define MAX_EIU 6 + +/* irqs generated by device attached to the EBU need to be acked in + * a special manner + */ +#define LTQ_ICU_EBU_IRQ 22 + +#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y)) +#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x)) + +#define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y)) +#define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x)) + +static unsigned short ltq_eiu_irq[MAX_EIU] = { + LTQ_EIU_IR0, + LTQ_EIU_IR1, + LTQ_EIU_IR2, + LTQ_EIU_IR3, + LTQ_EIU_IR4, + LTQ_EIU_IR5, +}; + +static struct resource ltq_icu_resource = { + .name = "icu", + .start = LTQ_ICU_BASE_ADDR, + .end = LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource ltq_eiu_resource = { + .name = "eiu", + .start = LTQ_EIU_BASE_ADDR, + .end = LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_icu_membase; +static void __iomem *ltq_eiu_membase; + +void ltq_disable_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); +} + +void ltq_mask_and_ack_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + u32 isr = LTQ_ICU_IM0_ISR; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); + ltq_icu_w32((1 << irq_nr), isr); +} + +static void ltq_ack_irq(struct irq_data *d) +{ + u32 isr = LTQ_ICU_IM0_ISR; + int irq_nr = d->irq - INT_NUM_IRQ0; + + isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32((1 << irq_nr), isr); +} + +void ltq_enable_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier); +} + +static unsigned int ltq_startup_eiu_irq(struct irq_data *d) +{ + int i; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ltq_enable_irq(d); + for (i = 0; i < MAX_EIU; i++) { + if (irq_nr == ltq_eiu_irq[i]) { + /* low level - we should really handle set_type */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | + (0x6 << (i * 4)), LTQ_EIU_EXIN_C); + /* clear all pending */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i), + LTQ_EIU_EXIN_INIC); + /* enable */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i), + LTQ_EIU_EXIN_INEN); + break; + } + } + + return 0; +} + +static void ltq_shutdown_eiu_irq(struct irq_data *d) +{ + int i; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ltq_disable_irq(d); + for (i = 0; i < MAX_EIU; i++) { + if (irq_nr == ltq_eiu_irq[i]) { + /* disable */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i), + LTQ_EIU_EXIN_INEN); + break; + } + } +} + +static struct irq_chip ltq_irq_type = { + "icu", + .irq_enable = ltq_enable_irq, + .irq_disable = ltq_disable_irq, + .irq_unmask = ltq_enable_irq, + .irq_ack = ltq_ack_irq, + .irq_mask = ltq_disable_irq, + .irq_mask_ack = ltq_mask_and_ack_irq, +}; + +static struct irq_chip ltq_eiu_type = { + "eiu", + .irq_startup = ltq_startup_eiu_irq, + .irq_shutdown = ltq_shutdown_eiu_irq, + .irq_enable = ltq_enable_irq, + .irq_disable = ltq_disable_irq, + .irq_unmask = ltq_enable_irq, + .irq_ack = ltq_ack_irq, + .irq_mask = ltq_disable_irq, + .irq_mask_ack = ltq_mask_and_ack_irq, +}; + +static void ltq_hw_irqdispatch(int module) +{ + u32 irq; + + irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET)); + if (irq == 0) + return; + + /* silicon bug causes only the msb set to 1 to be valid. all + * other bits might be bogus + */ + irq = __fls(irq); + do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module)); + + /* if this is a EBU irq, we need to ack it or get a deadlock */ + if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0)) + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10, + LTQ_EBU_PCC_ISTAT); +} + +#define DEFINE_HWx_IRQDISPATCH(x) \ + static void ltq_hw ## x ## _irqdispatch(void) \ + { \ + ltq_hw_irqdispatch(x); \ + } +DEFINE_HWx_IRQDISPATCH(0) +DEFINE_HWx_IRQDISPATCH(1) +DEFINE_HWx_IRQDISPATCH(2) +DEFINE_HWx_IRQDISPATCH(3) +DEFINE_HWx_IRQDISPATCH(4) + +static void ltq_hw5_irqdispatch(void) +{ + do_IRQ(MIPS_CPU_TIMER_IRQ); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + unsigned int i; + + if (pending & CAUSEF_IP7) { + do_IRQ(MIPS_CPU_TIMER_IRQ); + goto out; + } else { + for (i = 0; i < 5; i++) { + if (pending & (CAUSEF_IP2 << i)) { + ltq_hw_irqdispatch(i); + goto out; + } + } + } + pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); + +out: + return; +} + +static struct irqaction cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "cascade", +}; + +void __init arch_init_irq(void) +{ + int i; + + if (insert_resource(&iomem_resource, <q_icu_resource) < 0) + panic("Failed to insert icu memory\n"); + + if (request_mem_region(ltq_icu_resource.start, + resource_size(<q_icu_resource), "icu") < 0) + panic("Failed to request icu memory\n"); + + ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start, + resource_size(<q_icu_resource)); + if (!ltq_icu_membase) + panic("Failed to remap icu memory\n"); + + if (insert_resource(&iomem_resource, <q_eiu_resource) < 0) + panic("Failed to insert eiu memory\n"); + + if (request_mem_region(ltq_eiu_resource.start, + resource_size(<q_eiu_resource), "eiu") < 0) + panic("Failed to request eiu memory\n"); + + ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start, + resource_size(<q_eiu_resource)); + if (!ltq_eiu_membase) + panic("Failed to remap eiu memory\n"); + + /* make sure all irqs are turned off by default */ + for (i = 0; i < 5; i++) + ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET)); + + /* clear all possibly pending interrupts */ + ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET)); + + mips_cpu_irq_init(); + + for (i = 2; i <= 6; i++) + setup_irq(i, &cascade); + + if (cpu_has_vint) { + pr_info("Setting up vectored interrupts\n"); + set_vi_handler(2, ltq_hw0_irqdispatch); + set_vi_handler(3, ltq_hw1_irqdispatch); + set_vi_handler(4, ltq_hw2_irqdispatch); + set_vi_handler(5, ltq_hw3_irqdispatch); + set_vi_handler(6, ltq_hw4_irqdispatch); + set_vi_handler(7, ltq_hw5_irqdispatch); + } + + for (i = INT_NUM_IRQ0; + i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++) + if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) || + (i == LTQ_EIU_IR2)) + irq_set_chip_and_handler(i, <q_eiu_type, + handle_level_irq); + /* EIU3-5 only exist on ar9 and vr9 */ + else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) || + (i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9())) + irq_set_chip_and_handler(i, <q_eiu_type, + handle_level_irq); + else + irq_set_chip_and_handler(i, <q_irq_type, + handle_level_irq); + +#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | + IE_IRQ3 | IE_IRQ4 | IE_IRQ5); +#else + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 | + IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); +#endif +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h new file mode 100644 index 0000000..7e01b8c --- /dev/null +++ b/arch/mips/lantiq/machtypes.h @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_MACH_H__ +#define _LANTIQ_MACH_H__ + +#include <asm/mips_machine.h> + +enum lantiq_mach_type { + LTQ_MACH_GENERIC = 0, + LTQ_MACH_EASY50712, /* Danube evaluation board */ + LTQ_MACH_EASY50601, /* Amazon SE evaluation board */ +}; + +#endif diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c new file mode 100644 index 0000000..56ba007 --- /dev/null +++ b/arch/mips/lantiq/prom.c @@ -0,0 +1,71 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq.h> + +#include "prom.h" +#include "clk.h" + +static struct ltq_soc_info soc_info; + +unsigned int ltq_get_cpu_ver(void) +{ + return soc_info.rev; +} +EXPORT_SYMBOL(ltq_get_cpu_ver); + +unsigned int ltq_get_soc_type(void) +{ + return soc_info.type; +} +EXPORT_SYMBOL(ltq_get_soc_type); + +const char *get_system_type(void) +{ + return soc_info.sys_type; +} + +void prom_free_prom_memory(void) +{ +} + +static void __init prom_init_cmdline(void) +{ + int argc = fw_arg0; + char **argv = (char **) KSEG1ADDR(fw_arg1); + int i; + + for (i = 0; i < argc; i++) { + char *p = (char *) KSEG1ADDR(argv[i]); + + if (p && *p) { + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + } + } +} + +void __init prom_init(void) +{ + struct clk *clk; + + ltq_soc_detect(&soc_info); + clk_init(); + clk = clk_get(0, "cpu"); + snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d", + soc_info.name, soc_info.rev); + clk_put(clk); + soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0'; + pr_info("SoC: %s\n", soc_info.sys_type); + prom_init_cmdline(); +} diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h new file mode 100644 index 0000000..b4229d9 --- /dev/null +++ b/arch/mips/lantiq/prom.h @@ -0,0 +1,25 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_PROM_H__ +#define _LTQ_PROM_H__ + +#define LTQ_SYS_TYPE_LEN 0x100 + +struct ltq_soc_info { + unsigned char *name; + unsigned int rev; + unsigned int partnum; + unsigned int type; + unsigned char sys_type[LTQ_SYS_TYPE_LEN]; +}; + +extern void ltq_soc_detect(struct ltq_soc_info *i); +extern void ltq_soc_setup(void); + +#endif diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c new file mode 100644 index 0000000..9b8af77 --- /dev/null +++ b/arch/mips/lantiq/setup.c @@ -0,0 +1,66 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <asm/bootinfo.h> + +#include <lantiq_soc.h> + +#include "machtypes.h" +#include "devices.h" +#include "prom.h" + +void __init plat_mem_setup(void) +{ + /* assume 16M as default incase uboot fails to pass proper ramsize */ + unsigned long memsize = 16; + char **envp = (char **) KSEG1ADDR(fw_arg2); + + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + set_io_port_base((unsigned long) KSEG1); + + while (*envp) { + char *e = (char *)KSEG1ADDR(*envp); + if (!strncmp(e, "memsize=", 8)) { + e += 8; + if (strict_strtoul(e, 0, &memsize)) + pr_warn("bad memsize specified\n"); + } + envp++; + } + memsize *= 1024 * 1024; + add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); +} + +static int __init +lantiq_setup(void) +{ + ltq_soc_setup(); + mips_machine_setup(); + return 0; +} + +arch_initcall(lantiq_setup); + +static void __init +lantiq_generic_init(void) +{ + /* Nothing to do */ +} + +MIPS_MACHINE(LTQ_MACH_GENERIC, + "Generic", + "Generic Lantiq based board", + lantiq_generic_init); diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig new file mode 100644 index 0000000..2b857de --- /dev/null +++ b/arch/mips/lantiq/xway/Kconfig @@ -0,0 +1,23 @@ +if SOC_XWAY + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY50712 + bool "Easy50712 - Danube" + default y + +endmenu + +endif + +if SOC_AMAZON_SE + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY50601 + bool "Easy50601 - Amazon SE" + default y + +endmenu + +endif diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile new file mode 100644 index 0000000..c517f2e --- /dev/null +++ b/arch/mips/lantiq/xway/Makefile @@ -0,0 +1,7 @@ +obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o + +obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o +obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o + +obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o +obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c new file mode 100644 index 0000000..22d823a --- /dev/null +++ b/arch/mips/lantiq/xway/clk-ase.c @@ -0,0 +1,48 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +/* cgu registers */ +#define LTQ_CGU_SYS 0x0010 + +unsigned int ltq_get_io_region_clock(void) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_io_region_clock); + +unsigned int ltq_get_fpi_bus_clock(int fpi) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_fpi_bus_clock); + +unsigned int ltq_get_cpu_hz(void) +{ + if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5)) + return CLOCK_266M; + else + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_cpu_hz); + +unsigned int ltq_get_fpi_hz(void) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c new file mode 100644 index 0000000..ddd3959 --- /dev/null +++ b/arch/mips/lantiq/xway/clk-xway.c @@ -0,0 +1,223 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +static unsigned int ltq_ram_clocks[] = { + CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; +#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3] + +#define BASIC_FREQUENCY_1 35328000 +#define BASIC_FREQUENCY_2 36000000 +#define BASIS_REQUENCY_USB 12000000 + +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) + +#define LTQ_CGU_PLL0_CFG 0x0004 +#define LTQ_CGU_PLL1_CFG 0x0008 +#define LTQ_CGU_PLL2_CFG 0x000C +#define LTQ_CGU_SYS 0x0010 +#define LTQ_CGU_UPDATE 0x0014 +#define LTQ_CGU_IF_CLK 0x0018 +#define LTQ_CGU_OSC_CON 0x001C +#define LTQ_CGU_SMD 0x0020 +#define LTQ_CGU_CT1SR 0x0028 +#define LTQ_CGU_CT2SR 0x002C +#define LTQ_CGU_PCMCR 0x0030 +#define LTQ_CGU_PCI_CR 0x0034 +#define LTQ_CGU_PD_PC 0x0038 +#define LTQ_CGU_FMR 0x003C + +#define CGU_PLL0_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31)) +#define CGU_PLL0_BYPASS \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30)) +#define CGU_PLL0_CFG_DSMSEL \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28)) +#define CGU_PLL0_CFG_FRAC_EN \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27)) +#define CGU_PLL1_SRC \ + (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31)) +#define CGU_PLL2_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20)) +#define CGU_SYS_FPI_SEL (1 << 6) +#define CGU_SYS_DDR_SEL 0x3 +#define CGU_PLL0_SRC (1 << 29) + +#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17) +#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6) +#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2) +#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17) +#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13) + +static unsigned int ltq_get_pll0_fdiv(void); + +static inline unsigned int get_input_clock(int pll) +{ + switch (pll) { + case 0: + if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 1: + if (CGU_PLL1_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 2: + switch (CGU_PLL2_SRC) { + case 0: + return ltq_get_pll0_fdiv(); + case 1: + return CGU_PLL2_PHASE_DIVIDER_ENABLE ? + BASIC_FREQUENCY_1 : + BASIC_FREQUENCY_2; + case 2: + return BASIS_REQUENCY_USB; + } + default: + return 0; + } +} + +static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den) +{ + u64 res, clock = get_input_clock(pll); + + res = num * clock; + do_div(res, den); + return res; +} + +static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 10) + K; + unsigned int den = (M + 1) << 10; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 11) + K + 512; + unsigned int den = (M + 1) << 11; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = K >= 512 ? + ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; + unsigned int den = (M + 1) << 12; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int dsm(int pll, unsigned int M, unsigned int N, + unsigned int K, unsigned int dsmsel, unsigned int phase_div_en) +{ + if (!dsmsel) + return mash_dsm(pll, M, N, K); + else if (!phase_div_en) + return mash_dsm(pll, M, N, K); + else + return ssff_dsm_2(pll, M, N, K); +} + +static inline unsigned int ltq_get_pll0_fosc(void) +{ + if (CGU_PLL0_BYPASS) + return get_input_clock(0); + else + return !CGU_PLL0_CFG_FRAC_EN + ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, + CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE) + : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, + CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE); +} + +static unsigned int ltq_get_pll0_fdiv(void) +{ + unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; + + return (ltq_get_pll0_fosc() + (div >> 1)) / div; +} + +unsigned int ltq_get_io_region_clock(void) +{ + unsigned int ret = ltq_get_pll0_fosc(); + + switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) { + default: + case 0: + return (ret + 1) / 2; + case 1: + return (ret * 2 + 2) / 5; + case 2: + return (ret + 1) / 3; + case 3: + return (ret + 2) / 4; + } +} +EXPORT_SYMBOL(ltq_get_io_region_clock); + +unsigned int ltq_get_fpi_bus_clock(int fpi) +{ + unsigned int ret = ltq_get_io_region_clock(); + + if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL)) + ret >>= 1; + return ret; +} +EXPORT_SYMBOL(ltq_get_fpi_bus_clock); + +unsigned int ltq_get_cpu_hz(void) +{ + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) { + case 0: + return CLOCK_333M; + case 4: + return DDR_HZ; + case 8: + return DDR_HZ << 1; + default: + return DDR_HZ >> 1; + } +} +EXPORT_SYMBOL(ltq_get_cpu_hz); + +unsigned int ltq_get_fpi_hz(void) +{ + unsigned int ddr_clock = DDR_HZ; + + if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40) + return ddr_clock >> 1; + return ddr_clock; +} +EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c new file mode 100644 index 0000000..e09e789 --- /dev/null +++ b/arch/mips/lantiq/xway/devices.c @@ -0,0 +1,121 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "devices.h" + +/* gpio */ +static struct resource ltq_gpio_resource[] = { + { + .name = "gpio0", + .start = LTQ_GPIO0_BASE_ADDR, + .end = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "gpio1", + .start = LTQ_GPIO1_BASE_ADDR, + .end = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "gpio2", + .start = LTQ_GPIO2_BASE_ADDR, + .end = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +void __init ltq_register_gpio(void) +{ + platform_device_register_simple("ltq_gpio", 0, + <q_gpio_resource[0], 1); + platform_device_register_simple("ltq_gpio", 1, + <q_gpio_resource[1], 1); + + /* AR9 and VR9 have an extra gpio block */ + if (ltq_is_ar9() || ltq_is_vr9()) { + platform_device_register_simple("ltq_gpio", 2, + <q_gpio_resource[2], 1); + } +} + +/* serial to parallel conversion */ +static struct resource ltq_stp_resource = { + .name = "stp", + .start = LTQ_STP_BASE_ADDR, + .end = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +void __init ltq_register_gpio_stp(void) +{ + platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1); +} + +/* asc ports - amazon se has its own serial mapping */ +static struct resource ltq_ase_asc_resources[] = { + { + .name = "asc0", + .start = LTQ_ASC1_BASE_ADDR, + .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_ASE_TIR), + IRQ_RES(rx, LTQ_ASC_ASE_RIR), + IRQ_RES(err, LTQ_ASC_ASE_EIR), +}; + +void __init ltq_register_ase_asc(void) +{ + platform_device_register_simple("ltq_asc", 0, + ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources)); +} + +/* ethernet */ +static struct resource ltq_etop_resources = { + .name = "etop", + .start = LTQ_ETOP_BASE_ADDR, + .end = LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ltq_etop = { + .name = "ltq_etop", + .resource = <q_etop_resources, + .num_resources = 1, +}; + +void __init +ltq_register_etop(struct ltq_eth_data *eth) +{ + if (eth) { + ltq_etop.dev.platform_data = eth; + platform_device_register(<q_etop); + } +} diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h new file mode 100644 index 0000000..e904934 --- /dev/null +++ b/arch/mips/lantiq/xway/devices.h @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEVICES_XWAY_H__ +#define _LTQ_DEVICES_XWAY_H__ + +#include "../devices.h" +#include <linux/phy.h> + +extern void ltq_register_gpio(void); +extern void ltq_register_gpio_stp(void); +extern void ltq_register_ase_asc(void); +extern void ltq_register_etop(struct ltq_eth_data *eth); + +#endif diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c new file mode 100644 index 0000000..4278a45 --- /dev/null +++ b/arch/mips/lantiq/xway/dma.c @@ -0,0 +1,253 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> + +#include <lantiq_soc.h> +#include <xway_dma.h> + +#define LTQ_DMA_CTRL 0x10 +#define LTQ_DMA_CPOLL 0x14 +#define LTQ_DMA_CS 0x18 +#define LTQ_DMA_CCTRL 0x1C +#define LTQ_DMA_CDBA 0x20 +#define LTQ_DMA_CDLEN 0x24 +#define LTQ_DMA_CIS 0x28 +#define LTQ_DMA_CIE 0x2C +#define LTQ_DMA_PS 0x40 +#define LTQ_DMA_PCTRL 0x44 +#define LTQ_DMA_IRNEN 0xf4 + +#define DMA_DESCPT BIT(3) /* descriptor complete irq */ +#define DMA_TX BIT(8) /* TX channel direction */ +#define DMA_CHAN_ON BIT(0) /* channel on / off bit */ +#define DMA_PDEN BIT(6) /* enable packet drop */ +#define DMA_CHAN_RST BIT(1) /* channel on / off bit */ +#define DMA_RESET BIT(0) /* channel on / off bit */ +#define DMA_IRQ_ACK 0x7e /* IRQ status register */ +#define DMA_POLL BIT(31) /* turn on channel polling */ +#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ +#define DMA_2W_BURST BIT(1) /* 2 word burst length */ +#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ +#define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */ +#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ + +#define ltq_dma_r32(x) ltq_r32(ltq_dma_membase + (x)) +#define ltq_dma_w32(x, y) ltq_w32(x, ltq_dma_membase + (y)) +#define ltq_dma_w32_mask(x, y, z) ltq_w32_mask(x, y, \ + ltq_dma_membase + (z)) + +static struct resource ltq_dma_resource = { + .name = "dma", + .start = LTQ_DMA_BASE_ADDR, + .end = LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_dma_membase; + +void +ltq_dma_enable_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_enable_irq); + +void +ltq_dma_disable_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_disable_irq); + +void +ltq_dma_ack_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_ack_irq); + +void +ltq_dma_open(struct ltq_dma_channel *ch) +{ + unsigned long flag; + + local_irq_save(flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); + ltq_dma_enable_irq(ch); + local_irq_restore(flag); +} +EXPORT_SYMBOL_GPL(ltq_dma_open); + +void +ltq_dma_close(struct ltq_dma_channel *ch) +{ + unsigned long flag; + + local_irq_save(flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + ltq_dma_disable_irq(ch); + local_irq_restore(flag); +} +EXPORT_SYMBOL_GPL(ltq_dma_close); + +static void +ltq_dma_alloc(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ch->desc = 0; + ch->desc_base = dma_alloc_coherent(NULL, + LTQ_DESC_NUM * LTQ_DESC_SIZE, + &ch->phys, GFP_ATOMIC); + memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE); + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(ch->phys, LTQ_DMA_CDBA); + ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + wmb(); + ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL); + while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST) + ; + local_irq_restore(flags); +} + +void +ltq_dma_alloc_tx(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ltq_dma_alloc(ch); + + local_irq_save(flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx); + +void +ltq_dma_alloc_rx(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ltq_dma_alloc(ch); + + local_irq_save(flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx); + +void +ltq_dma_free(struct ltq_dma_channel *ch) +{ + if (!ch->desc_base) + return; + ltq_dma_close(ch); + dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE, + ch->desc_base, ch->phys); +} +EXPORT_SYMBOL_GPL(ltq_dma_free); + +void +ltq_dma_init_port(int p) +{ + ltq_dma_w32(p, LTQ_DMA_PS); + switch (p) { + case DMA_PORT_ETOP: + /* + * Tell the DMA engine to swap the endianess of data frames and + * drop packets if the channel arbitration fails. + */ + ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN, + LTQ_DMA_PCTRL); + break; + + case DMA_PORT_DEU: + ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2), + LTQ_DMA_PCTRL); + break; + + default: + break; + } +} +EXPORT_SYMBOL_GPL(ltq_dma_init_port); + +int __init +ltq_dma_init(void) +{ + int i; + + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_dma_resource) < 0) + panic("Failed to insert dma memory\n"); + + if (request_mem_region(ltq_dma_resource.start, + resource_size(<q_dma_resource), "dma") < 0) + panic("Failed to request dma memory\n"); + + /* remap dma register range */ + ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start, + resource_size(<q_dma_resource)); + if (!ltq_dma_membase) + panic("Failed to remap dma memory\n"); + + /* power up and reset the dma engine */ + ltq_pmu_enable(PMU_DMA); + ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL); + + /* disable all interrupts */ + ltq_dma_w32(0, LTQ_DMA_IRNEN); + + /* reset/configure each channel */ + for (i = 0; i < DMA_MAX_CHANNEL; i++) { + ltq_dma_w32(i, LTQ_DMA_CS); + ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL); + ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + } + return 0; +} + +postcore_initcall(ltq_dma_init); diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c new file mode 100644 index 0000000..66eb52f --- /dev/null +++ b/arch/mips/lantiq/xway/ebu.c @@ -0,0 +1,53 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * EBU - the external bus unit attaches PCI, NOR and NAND + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/ioport.h> + +#include <lantiq_soc.h> + +/* all access to the ebu must be locked */ +DEFINE_SPINLOCK(ebu_lock); +EXPORT_SYMBOL_GPL(ebu_lock); + +static struct resource ltq_ebu_resource = { + .name = "ebu", + .start = LTQ_EBU_BASE_ADDR, + .end = LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped base addr of the clock unit and external bus unit */ +void __iomem *ltq_ebu_membase; + +static int __init lantiq_ebu_init(void) +{ + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_ebu_resource) < 0) + panic("Failed to insert ebu memory\n"); + + if (request_mem_region(ltq_ebu_resource.start, + resource_size(<q_ebu_resource), "ebu") < 0) + panic("Failed to request ebu memory\n"); + + /* remap ebu register range */ + ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start, + resource_size(<q_ebu_resource)); + if (!ltq_ebu_membase) + panic("Failed to remap ebu memory\n"); + + /* make sure to unprotect the memory region where flash is located */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); + return 0; +} + +postcore_initcall(lantiq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c new file mode 100644 index 0000000..a321451 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio.c @@ -0,0 +1,195 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> + +#include <lantiq_soc.h> + +#define LTQ_GPIO_OUT 0x00 +#define LTQ_GPIO_IN 0x04 +#define LTQ_GPIO_DIR 0x08 +#define LTQ_GPIO_ALTSEL0 0x0C +#define LTQ_GPIO_ALTSEL1 0x10 +#define LTQ_GPIO_OD 0x14 + +#define PINS_PER_PORT 16 +#define MAX_PORTS 3 + +#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) +#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r) +#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r) + +struct ltq_gpio { + void __iomem *membase; + struct gpio_chip chip; +}; + +static struct ltq_gpio ltq_gpio_port[MAX_PORTS]; + +int gpio_to_irq(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(gpio_to_irq); + +int irq_to_gpio(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(irq_to_gpio); + +int ltq_gpio_request(unsigned int pin, unsigned int alt0, + unsigned int alt1, unsigned int dir, const char *name) +{ + int id = 0; + + if (pin >= (MAX_PORTS * PINS_PER_PORT)) + return -EINVAL; + if (gpio_request(pin, name)) { + pr_err("failed to setup lantiq gpio: %s\n", name); + return -EBUSY; + } + if (dir) + gpio_direction_output(pin, 1); + else + gpio_direction_input(pin); + while (pin >= PINS_PER_PORT) { + pin -= PINS_PER_PORT; + id++; + } + if (alt0) + ltq_gpio_setbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL0, pin); + else + ltq_gpio_clearbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL0, pin); + if (alt1) + ltq_gpio_setbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL1, pin); + else + ltq_gpio_clearbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL1, pin); + return 0; +} +EXPORT_SYMBOL(ltq_gpio_request); + +static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + if (value) + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); + else + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); +} + +static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset); +} + +static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); + + return 0; +} + +static int ltq_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); + ltq_gpio_set(chip, offset, value); + + return 0; +} + +static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset); + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset); + return 0; +} + +static int ltq_gpio_probe(struct platform_device *pdev) +{ + struct resource *res; + + if (pdev->id >= MAX_PORTS) { + dev_err(&pdev->dev, "invalid gpio port %d\n", + pdev->id); + return -EINVAL; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get memory for gpio port %d\n", + pdev->id); + return -ENOENT; + } + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, + "failed to request memory for gpio port %d\n", + pdev->id); + return -EBUSY; + } + ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev, + res->start, resource_size(res)); + if (!ltq_gpio_port[pdev->id].membase) { + dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n", + pdev->id); + return -ENOMEM; + } + ltq_gpio_port[pdev->id].chip.label = "ltq_gpio"; + ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input; + ltq_gpio_port[pdev->id].chip.direction_output = + ltq_gpio_direction_output; + ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get; + ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set; + ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req; + ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id; + ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT; + platform_set_drvdata(pdev, <q_gpio_port[pdev->id]); + return gpiochip_add(<q_gpio_port[pdev->id].chip); +} + +static struct platform_driver +ltq_gpio_driver = { + .probe = ltq_gpio_probe, + .driver = { + .name = "ltq_gpio", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_gpio_init(void) +{ + int ret = platform_driver_register(<q_gpio_driver); + + if (ret) + pr_info("ltq_gpio : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_gpio_init); diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c new file mode 100644 index 0000000..a479355 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio_ebu.c @@ -0,0 +1,126 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <lantiq_soc.h> + +/* + * By attaching hardware latches to the EBU it is possible to create output + * only gpios. This driver configures a special memory address, which when + * written to outputs 16 bit to the latches. + */ + +#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ +#define LTQ_EBU_WP 0x80000000 /* write protect bit */ + +/* we keep a shadow value of the last value written to the ebu */ +static int ltq_ebu_gpio_shadow = 0x0; +static void __iomem *ltq_ebu_gpio_membase; + +static void ltq_ebu_apply(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ebu_lock, flags); + ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); + *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + spin_unlock_irqrestore(&ebu_lock, flags); +} + +static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_ebu_gpio_shadow |= (1 << offset); + else + ltq_ebu_gpio_shadow &= ~(1 << offset); + ltq_ebu_apply(); +} + +static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_ebu_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_ebu_chip = { + .label = "ltq_ebu", + .direction_output = ltq_ebu_direction_output, + .set = ltq_ebu_set, + .base = 72, + .ngpio = 16, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_ebu_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + return -ENOENT; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + return -EBUSY; + } + + ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_ebu_gpio_membase) { + dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + return -ENOMEM; + } + + /* grab the default shadow value passed form the platform code */ + ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + + /* write protect the region */ + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + + ret = gpiochip_add(<q_ebu_chip); + if (!ret) + ltq_ebu_apply(); + return ret; +} + +static struct platform_driver ltq_ebu_driver = { + .probe = ltq_ebu_probe, + .driver = { + .name = "ltq_ebu", + .owner = THIS_MODULE, + }, +}; + +static int __init ltq_ebu_init(void) +{ + int ret = platform_driver_register(<q_ebu_driver); + + if (ret) + pr_info("ltq_ebu : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c new file mode 100644 index 0000000..67d59d6 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio_stp.c @@ -0,0 +1,157 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2007 John Crispin <blogic@openwrt.org> + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +#define LTQ_STP_CON0 0x00 +#define LTQ_STP_CON1 0x04 +#define LTQ_STP_CPU0 0x08 +#define LTQ_STP_CPU1 0x0C +#define LTQ_STP_AR 0x10 + +#define LTQ_STP_CON_SWU (1 << 31) +#define LTQ_STP_2HZ 0 +#define LTQ_STP_4HZ (1 << 23) +#define LTQ_STP_8HZ (2 << 23) +#define LTQ_STP_10HZ (3 << 23) +#define LTQ_STP_SPEED_MASK (0xf << 23) +#define LTQ_STP_UPD_FPI (1 << 31) +#define LTQ_STP_UPD_MASK (3 << 30) +#define LTQ_STP_ADSL_SRC (3 << 24) + +#define LTQ_STP_GROUP0 (1 << 0) + +#define LTQ_STP_RISING 0 +#define LTQ_STP_FALLING (1 << 26) +#define LTQ_STP_EDGE_MASK (1 << 26) + +#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) +#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) +#define ltq_stp_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ + ltq_stp_membase + (reg)) + +static int ltq_stp_shadow = 0xffff; +static void __iomem *ltq_stp_membase; + +static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_stp_shadow |= (1 << offset); + else + ltq_stp_shadow &= ~(1 << offset); + ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); +} + +static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_stp_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_stp_chip = { + .label = "ltq_stp", + .direction_output = ltq_stp_direction_output, + .set = ltq_stp_set, + .base = 48, + .ngpio = 24, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_stp_hw_init(void) +{ + /* the 3 pins used to control the external stp */ + ltq_gpio_request(4, 1, 0, 1, "stp-st"); + ltq_gpio_request(5, 1, 0, 1, "stp-d"); + ltq_gpio_request(6, 1, 0, 1, "stp-sh"); + + /* sane defaults */ + ltq_stp_w32(0, LTQ_STP_AR); + ltq_stp_w32(0, LTQ_STP_CPU0); + ltq_stp_w32(0, LTQ_STP_CPU1); + ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); + ltq_stp_w32(0, LTQ_STP_CON1); + + /* rising or falling edge */ + ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); + + /* per default stp 15-0 are set */ + ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); + + /* stp are update periodically by the FPI bus */ + ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); + + /* set stp update speed */ + ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); + + /* tell the hardware that pin (led) 0 and 1 are controlled + * by the dsl arc + */ + ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); + + ltq_pmu_enable(PMU_LED); + return 0; +} + +static int __devinit ltq_stp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0; + + if (!res) + return -ENOENT; + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request STP memory\n"); + return -EBUSY; + } + ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_stp_membase) { + dev_err(&pdev->dev, "failed to remap STP memory\n"); + return -ENOMEM; + } + ret = gpiochip_add(<q_stp_chip); + if (!ret) + ret = ltq_stp_hw_init(); + + return ret; +} + +static struct platform_driver ltq_stp_driver = { + .probe = ltq_stp_probe, + .driver = { + .name = "ltq_stp", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_stp_init(void) +{ + int ret = platform_driver_register(<q_stp_driver); + + if (ret) + pr_info("ltq_stp: error registering platfom driver"); + return ret; +} + +postcore_initcall(ltq_stp_init); diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c new file mode 100644 index 0000000..d5aaf63 --- /dev/null +++ b/arch/mips/lantiq/xway/mach-easy50601.c @@ -0,0 +1,57 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> + +#include <lantiq.h> + +#include "../machtypes.h" +#include "devices.h" + +static struct mtd_partition easy50601_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xE0000, + }, + { + .name = "rootfs", + .offset = 0x100000, + .size = 0x300000, + }, +}; + +static struct physmap_flash_data easy50601_flash_data = { + .nr_parts = ARRAY_SIZE(easy50601_partitions), + .parts = easy50601_partitions, +}; + +static void __init easy50601_init(void) +{ + ltq_register_nor(&easy50601_flash_data); +} + +MIPS_MACHINE(LTQ_MACH_EASY50601, + "EASY50601", + "EASY50601 Eval Board", + easy50601_init); diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c new file mode 100644 index 0000000..ea5027b --- /dev/null +++ b/arch/mips/lantiq/xway/mach-easy50712.c @@ -0,0 +1,74 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" + +static struct mtd_partition easy50712_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xe0000, + }, + { + .name = "rootfs", + .offset = 0x100000, + .size = 0x300000, + }, +}; + +static struct physmap_flash_data easy50712_flash_data = { + .nr_parts = ARRAY_SIZE(easy50712_partitions), + .parts = easy50712_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static void __init easy50712_init(void) +{ + ltq_register_gpio_stp(); + ltq_register_nor(&easy50712_flash_data); + ltq_register_pci(<q_pci_data); + ltq_register_etop(<q_eth_data); +} + +MIPS_MACHINE(LTQ_MACH_EASY50712, + "EASY50712", + "EASY50712 Eval Board", + easy50712_init); diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c new file mode 100644 index 0000000..9d69f01e --- /dev/null +++ b/arch/mips/lantiq/xway/pmu.c @@ -0,0 +1,70 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/ioport.h> + +#include <lantiq_soc.h> + +/* PMU - the power management unit allows us to turn part of the core + * on and off + */ + +/* the enable / disable registers */ +#define LTQ_PMU_PWDCR 0x1C +#define LTQ_PMU_PWDSR 0x20 + +#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y)) +#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x)) + +static struct resource ltq_pmu_resource = { + .name = "pmu", + .start = LTQ_PMU_BASE_ADDR, + .end = LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_pmu_membase; + +void ltq_pmu_enable(unsigned int module) +{ + int err = 1000000; + + ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR); + do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module)); + + if (!err) + panic("activating PMU module failed!\n"); +} +EXPORT_SYMBOL(ltq_pmu_enable); + +void ltq_pmu_disable(unsigned int module) +{ + ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR); +} +EXPORT_SYMBOL(ltq_pmu_disable); + +int __init ltq_pmu_init(void) +{ + if (insert_resource(&iomem_resource, <q_pmu_resource) < 0) + panic("Failed to insert pmu memory\n"); + + if (request_mem_region(ltq_pmu_resource.start, + resource_size(<q_pmu_resource), "pmu") < 0) + panic("Failed to request pmu memory\n"); + + ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start, + resource_size(<q_pmu_resource)); + if (!ltq_pmu_membase) + panic("Failed to remap pmu memory\n"); + return 0; +} + +core_initcall(ltq_pmu_init); diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c new file mode 100644 index 0000000..abe49f4 --- /dev/null +++ b/arch/mips/lantiq/xway/prom-ase.c @@ -0,0 +1,39 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_AMAZON_SE "Amazon_SE" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + switch (i->partnum) { + case SOC_ID_AMAZON_SE: + i->name = SOC_AMAZON_SE; + i->type = SOC_TYPE_AMAZON_SE; + break; + + default: + unreachable(); + break; + } +} diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c new file mode 100644 index 0000000..1686692a --- /dev/null +++ b/arch/mips/lantiq/xway/prom-xway.c @@ -0,0 +1,54 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_DANUBE "Danube" +#define SOC_TWINPASS "Twinpass" +#define SOC_AR9 "AR9" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + switch (i->partnum) { + case SOC_ID_DANUBE1: + case SOC_ID_DANUBE2: + i->name = SOC_DANUBE; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_TWINPASS: + i->name = SOC_TWINPASS; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_ARX188: + case SOC_ID_ARX168: + case SOC_ID_ARX182: + i->name = SOC_AR9; + i->type = SOC_TYPE_AR9; + break; + + default: + unreachable(); + break; + } +} diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c new file mode 100644 index 0000000..a1be36d --- /dev/null +++ b/arch/mips/lantiq/xway/reset.c @@ -0,0 +1,91 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/module.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> + +#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y)) +#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x)) + +/* register definitions */ +#define LTQ_RCU_RST 0x0010 +#define LTQ_RCU_RST_ALL 0x40000000 + +#define LTQ_RCU_RST_STAT 0x0014 +#define LTQ_RCU_STAT_SHIFT 26 + +static struct resource ltq_rcu_resource = { + .name = "rcu", + .start = LTQ_RCU_BASE_ADDR, + .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped base addr of the reset control unit */ +static void __iomem *ltq_rcu_membase; + +/* This function is used by the watchdog driver */ +int ltq_reset_cause(void) +{ + u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT); + return val >> LTQ_RCU_STAT_SHIFT; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +static void ltq_machine_restart(char *command) +{ + pr_notice("System restart\n"); + local_irq_disable(); + ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST); + unreachable(); +} + +static void ltq_machine_halt(void) +{ + pr_notice("System halted.\n"); + local_irq_disable(); + unreachable(); +} + +static void ltq_machine_power_off(void) +{ + pr_notice("Please turn off the power now.\n"); + local_irq_disable(); + unreachable(); +} + +static int __init mips_reboot_setup(void) +{ + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) + panic("Failed to insert rcu memory\n"); + + if (request_mem_region(ltq_rcu_resource.start, + resource_size(<q_rcu_resource), "rcu") < 0) + panic("Failed to request rcu memory\n"); + + /* remap rcu register range */ + ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, + resource_size(<q_rcu_resource)); + if (!ltq_rcu_membase) + panic("Failed to remap rcu memory\n"); + + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c new file mode 100644 index 0000000..f6f3267 --- /dev/null +++ b/arch/mips/lantiq/xway/setup-ase.c @@ -0,0 +1,19 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +void __init ltq_soc_setup(void) +{ + ltq_register_ase_asc(); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c new file mode 100644 index 0000000..c292f64 --- /dev/null +++ b/arch/mips/lantiq/xway/setup-xway.c @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +void __init ltq_soc_setup(void) +{ + ltq_register_asc(0); + ltq_register_asc(1); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 2adead5..b2cad4f 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += dump_tlb.o +obj-$(CONFIG_CPU_XLR) += dump_tlb.o # libgcc-style stuff needed in the kernel obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index c768e300..6445716 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -17,7 +17,7 @@ .previous /* - * Return the size of a string including the ending NUL character upto a + * Return the size of a string including the ending NUL character up to a * maximum of a1 or 0 in case of error. * * Note: for performance reasons we deliberately accept that a user may diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index 8c807c9..0cb1b97 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = { .rating = 120, /* Functional for real use, but not desired */ .read = mfgpt_read, .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 22, }; int __init init_mfgpt_clocksource(void) @@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void) if (num_possible_cpus() > 1) /* MFGPT does not scale! */ return 0; - clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); - return clocksource_register(&clocksource_mfgpt); + return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); } arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index 11b193f..d93830a 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -29,9 +29,10 @@ unsigned long memsize, highmemsize; #define parse_even_earlier(res, option, p) \ do { \ - int ret; \ + unsigned int tmp __maybe_unused; \ + \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ - ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \ + tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \ } while (0) void __init prom_init_env(void) diff --git a/arch/mips/math-emu/dp_fsp.c b/arch/mips/math-emu/dp_fsp.c index 1dfbd92..daed683 100644 --- a/arch/mips/math-emu/dp_fsp.c +++ b/arch/mips/math-emu/dp_fsp.c @@ -62,7 +62,7 @@ ieee754dp ieee754dp_fsp(ieee754sp x) break; } - /* CANT possibly overflow,underflow, or need rounding + /* CAN'T possibly overflow,underflow, or need rounding */ /* drop the hidden bit */ diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c index aa566e7..09175f4 100644 --- a/arch/mips/math-emu/dp_mul.c +++ b/arch/mips/math-emu/dp_mul.c @@ -104,7 +104,7 @@ ieee754dp ieee754dp_mul(ieee754dp x, ieee754dp y) case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM): break; } - /* rm = xm * ym, re = xe+ye basicly */ + /* rm = xm * ym, re = xe+ye basically */ assert(xm & DP_HIDDEN_BIT); assert(ym & DP_HIDDEN_BIT); { diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index 36d975a..3c4a8c5 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -32,7 +32,7 @@ * not change cp0_epc due to the instruction * * According to the spec: - * 1) it shouldnt be a branch :-) + * 1) it shouldn't be a branch :-) * 2) it can be a COP instruction :-( * 3) if we are tring to run a protected memory space we must take * special care on memory access instructions :-( diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c index c06bb40..2722a25 100644 --- a/arch/mips/math-emu/sp_mul.c +++ b/arch/mips/math-emu/sp_mul.c @@ -104,7 +104,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y) case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM): break; } - /* rm = xm * ym, re = xe+ye basicly */ + /* rm = xm * ym, re = xe+ye basically */ assert(xm & SP_HIDDEN_BIT); assert(ym & SP_HIDDEN_BIT); diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index d679c77..4d8c162 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,7 +3,8 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - init.o tlbex.o tlbex-fault.o uasm.o page.o + init.o mmap.o tlbex.o tlbex-fault.o uasm.o \ + page.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -29,6 +30,7 @@ obj-$(CONFIG_CPU_TX39XX) += c-tx39.o tlb-r3k.o obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o +obj-$(CONFIG_CPU_XLR) += c-r4k.o tlb-r4k.o cex-gen.o obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b4923a7..d9bc5d3 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1006,6 +1006,7 @@ static void __cpuinit probe_pcache(void) case CPU_25KF: case CPU_SB1: case CPU_SB1A: + case CPU_XLR: c->dcache.flags |= MIPS_CACHE_PINDEX; break; @@ -1075,7 +1076,6 @@ static int __cpuinit probe_scache(void) unsigned long flags, addr, begin, end, pow2; unsigned int config = read_c0_config(); struct cpuinfo_mips *c = ¤t_cpu_data; - int tmp; if (config & CONF_SC) return 0; @@ -1108,7 +1108,6 @@ static int __cpuinit probe_scache(void) /* Now search for the wrap around point. */ pow2 = (128 * 1024); - tmp = 0; for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) { cache_op(Index_Load_Tag_SD, addr); __asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */ diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S index 2d08268..89c412b 100644 --- a/arch/mips/mm/cex-sb1.S +++ b/arch/mips/mm/cex-sb1.S @@ -79,7 +79,7 @@ LEAF(except_vec2_sb1) recovered_dcache: /* * Unlock CacheErr-D (which in turn unlocks CacheErr-DPA). - * Ought to log the occurence of this recovered dcache error. + * Ought to log the occurrence of this recovered dcache error. */ b recovered mtc0 $0,C0_CERR_D diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c new file mode 100644 index 0000000..ae3c20a --- /dev/null +++ b/arch/mips/mm/mmap.c @@ -0,0 +1,122 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/mman.h> +#include <linux/module.h> +#include <linux/random.h> +#include <linux/sched.h> + +unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ + +EXPORT_SYMBOL(shm_align_mask); + +#define COLOUR_ALIGN(addr,pgoff) \ + ((((addr) + shm_align_mask) & ~shm_align_mask) + \ + (((pgoff) << PAGE_SHIFT) & shm_align_mask)) + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct vm_area_struct * vmm; + int do_color_align; + + if (len > TASK_SIZE) + return -ENOMEM; + + if (flags & MAP_FIXED) { + /* Even MAP_FIXED mappings must reside within TASK_SIZE. */ + if (TASK_SIZE - len < addr) + return -EINVAL; + + /* + * We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) + return -EINVAL; + return addr; + } + + do_color_align = 0; + if (filp || (flags & MAP_SHARED)) + do_color_align = 1; + if (addr) { + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + vmm = find_vma(current->mm, addr); + if (TASK_SIZE - len >= addr && + (!vmm || addr + len <= vmm->vm_start)) + return addr; + } + addr = current->mm->mmap_base; + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + } +} + +void arch_pick_mmap_layout(struct mm_struct *mm) +{ + unsigned long random_factor = 0UL; + + if (current->flags & PF_RANDOMIZE) { + random_factor = get_random_int(); + random_factor = random_factor << PAGE_SHIFT; + if (TASK_IS_32BIT_ADDR) + random_factor &= 0xfffffful; + else + random_factor &= 0xffffffful; + } + + mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; + mm->get_unmapped_area = arch_get_unmapped_area; + mm->unmap_area = arch_unmap_area; +} + +static inline unsigned long brk_rnd(void) +{ + unsigned long rnd = get_random_int(); + + rnd = rnd << PAGE_SHIFT; + /* 8MB for 32bit, 256MB for 64bit */ + if (TASK_IS_32BIT_ADDR) + rnd = rnd & 0x7ffffful; + else + rnd = rnd & 0xffffffful; + + return rnd; +} + +unsigned long arch_randomize_brk(struct mm_struct *mm) +{ + unsigned long base = mm->brk; + unsigned long ret; + + ret = PAGE_ALIGN(base + brk_rnd()); + + if (ret < mm->brk) + return mm->brk; + + return ret; +} diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 04f9e17..424ed4b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -352,7 +352,7 @@ static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p) /* * Write random or indexed TLB entry, and care about the hazards from - * the preceeding mtc0 and for the following eret. + * the preceding mtc0 and for the following eret. */ enum tlb_write_entry { tlb_random, tlb_indexed }; @@ -404,6 +404,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_5KC: case CPU_TX49XX: case CPU_PR4450: + case CPU_XLR: uasm_i_nop(p); tlbw(p); break; @@ -1151,8 +1152,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) struct uasm_reloc *r = relocs; u32 *f; unsigned int final_len; - struct mips_huge_tlb_info htlb_info; - enum vmalloc64_mode vmalloc_mode; + struct mips_huge_tlb_info htlb_info __maybe_unused; + enum vmalloc64_mode vmalloc_mode __maybe_unused; memset(tlb_handler, 0, sizeof(tlb_handler)); memset(labels, 0, sizeof(labels)); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 414f0c9..31180c3 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -193,8 +193,6 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { - int result; - prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -360,20 +358,14 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif - /* Early detection of CMP support */ - result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - #ifdef CONFIG_MIPS_CMP - if (result) + /* Early detection of CMP support */ + if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ)) register_smp_ops(&cmp_smp_ops); + else #endif #ifdef CONFIG_MIPS_MT_SMP -#ifdef CONFIG_MIPS_CMP - if (!result) register_smp_ops(&vsmp_smp_ops); -#else - register_smp_ops(&vsmp_smp_ops); -#endif #endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 9027061..1d36c511 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -56,7 +56,6 @@ static DEFINE_RAW_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) { int irq; - u32 dummy; /* * Determine highest priority pending interrupt by performing @@ -83,7 +82,7 @@ static inline int mips_pcibios_iack(void) BONITO_PCIMAP_CFG = 0x20000; /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; + (void) BONITO_PCIMAP_CFG; iob(); /* sync */ irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); @@ -309,6 +308,8 @@ static void ipi_call_dispatch(void) static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) { + scheduler_ipi(); + return IRQ_HANDLED; } diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index e678915..49a38b0 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -130,7 +130,7 @@ int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, * cleared in the affinity mask, there will never be any * interrupt forwarding. But as soon as a program or operator * sets affinity for one of the related IRQs, we need to make - * sure that we don't ever try to forward across the VPE boundry, + * sure that we don't ever try to forward across the VPE boundary, * at least not until we engineer a system where the interrupt * _ack() or _end() function can somehow know that it corresponds * to an interrupt taken on another VPE, and perform the appropriate diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig new file mode 100644 index 0000000..a5ca743 --- /dev/null +++ b/arch/mips/netlogic/Kconfig @@ -0,0 +1,5 @@ +config NLM_COMMON + bool + +config NLM_XLR + bool diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile new file mode 100644 index 0000000..9bd3f73 --- /dev/null +++ b/arch/mips/netlogic/xlr/Makefile @@ -0,0 +1,5 @@ +obj-y += setup.o platform.o irq.o setup.o time.o +obj-$(CONFIG_SMP) += smp.o smpboot.o +obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c new file mode 100644 index 0000000..1446d58 --- /dev/null +++ b/arch/mips/netlogic/xlr/irq.c @@ -0,0 +1,300 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/mm.h> + +#include <asm/mipsregs.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/mips-extns.h> + +static u64 nlm_irq_mask; +static DEFINE_SPINLOCK(nlm_pic_lock); + +static void xlr_pic_enable(struct irq_data *d) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + unsigned long flags; + nlm_reg_t reg; + int irq = d->irq; + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + spin_lock_irqsave(&nlm_pic_lock, flags); + reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); + netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, + reg | (1 << 6) | (1 << 30) | (1 << 31)); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +static void xlr_pic_mask(struct irq_data *d) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + unsigned long flags; + nlm_reg_t reg; + int irq = d->irq; + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + spin_lock_irqsave(&nlm_pic_lock, flags); + reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); + netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, + reg | (1 << 6) | (1 << 30) | (0 << 31)); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +#ifdef CONFIG_PCI +/* Extra ACK needed for XLR on chip PCI controller */ +static void xlr_pci_ack(struct irq_data *d) +{ + nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET); + + netlogic_read_reg(pci_mmio, (0x140 >> 2)); +} + +/* Extra ACK needed for XLS on chip PCIe controller */ +static void xls_pcie_ack(struct irq_data *d) +{ + nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK2_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK3_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +/* For XLS B silicon, the 3,4 PCI interrupts are different */ +static void xls_pcie_ack_b(struct irq_data *d) +{ + nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK2_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK3_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); + break; + } +} +#endif + +static void xlr_pic_ack(struct irq_data *d) +{ + unsigned long flags; + nlm_reg_t *mmio; + int irq = d->irq; + void *hd = irq_data_get_irq_handler_data(d); + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + if (hd) { + void (*extra_ack)(void *) = hd; + extra_ack(d); + } + mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + spin_lock_irqsave(&nlm_pic_lock, flags); + netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE))); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +/* + * This chip definition handles interrupts routed thru the XLR + * hardware PIC, currently IRQs 8-39 are mapped to hardware intr + * 0-31 wired the XLR PIC + */ +static struct irq_chip xlr_pic = { + .name = "XLR-PIC", + .irq_enable = xlr_pic_enable, + .irq_mask = xlr_pic_mask, + .irq_ack = xlr_pic_ack, +}; + +static void rsvd_irq_handler(struct irq_data *d) +{ + WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); +} + +/* + * Chip definition for CPU originated interrupts(timer, msg) and + * IPIs + */ +struct irq_chip nlm_cpu_intr = { + .name = "XLR-CPU-INTR", + .irq_enable = rsvd_irq_handler, + .irq_mask = rsvd_irq_handler, + .irq_ack = rsvd_irq_handler, +}; + +void __init init_xlr_irqs(void) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t thread_mask = 1; + int level, i; + + pr_info("Interrupt thread mask [%x]\n", thread_mask); + for (i = 0; i < PIC_NUM_IRTS; i++) { + level = PIC_IRQ_IS_EDGE_TRIGGERED(i); + + /* Bind all PIC irqs to boot cpu */ + netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask); + + /* + * Use local scheduling and high polarity for all IRTs + * Invalidate all IRTs, by default + */ + netlogic_write_reg(mmio, PIC_IRT_1_BASE + i, + (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i)); + } + + /* Make all IRQs as level triggered by default */ + for (i = 0; i < NR_IRQS; i++) { + if (PIC_IRQ_IS_IRT(i)) + irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq); + else + irq_set_chip_and_handler(i, &nlm_cpu_intr, + handle_level_irq); + } +#ifdef CONFIG_SMP + irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, + nlm_smp_function_ipi_handler); + irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, + nlm_smp_resched_ipi_handler); + nlm_irq_mask |= + ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); +#endif + +#ifdef CONFIG_PCI + /* + * For PCI interrupts, we need to ack the PIC controller too, overload + * irq handler data to do this + */ + if (nlm_chip_is_xls()) { + if (nlm_chip_is_xls_b()) { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, + xls_pcie_ack_b); + } else { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); + } + } else { + /* XLR PCI controller ACK */ + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); + } +#endif + /* unmask all PIC related interrupts. If no handler is installed by the + * drivers, it'll just ack the interrupt and return + */ + for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) + nlm_irq_mask |= (1ULL << i); + + nlm_irq_mask |= (1ULL << IRQ_TIMER); +} + +void __init arch_init_irq(void) +{ + /* Initialize the irq descriptors */ + init_xlr_irqs(); + write_c0_eimr(nlm_irq_mask); +} + +void __cpuinit nlm_smp_irq_init(void) +{ + /* set interrupt mask for non-zero cpus */ + write_c0_eimr(nlm_irq_mask); +} + +asmlinkage void plat_irq_dispatch(void) +{ + uint64_t eirr; + int i; + + eirr = read_c0_eirr() & read_c0_eimr(); + if (!eirr) + return; + + /* no need of EIRR here, writing compare clears interrupt */ + if (eirr & (1 << IRQ_TIMER)) { + do_IRQ(IRQ_TIMER); + return; + } + + /* use dcltz: optimize below code */ + for (i = 63; i != -1; i--) { + if (eirr & (1ULL << i)) + break; + } + if (i == -1) { + pr_err("no interrupt !!\n"); + return; + } + + /* Ack eirr */ + write_c0_eirr(1ULL << i); + + do_IRQ(i); +} diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c new file mode 100644 index 0000000..609ec25 --- /dev/null +++ b/arch/mips/netlogic/xlr/platform.c @@ -0,0 +1,98 @@ +/* + * Copyright 2011, Netlogic Microsystems. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) +{ + nlm_reg_t *mmio; + unsigned int value; + + /* XLR uart does not need any mapping of regs */ + mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + value = netlogic_read_reg(mmio, 0); + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + return value; +} + +void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) +{ + nlm_reg_t *mmio; + + /* XLR uart does not need any mapping of regs */ + mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + netlogic_write_reg(mmio, 0, value); +} + +#define PORT(_irq) \ + { \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_MEM32, \ + .flags = (UPF_SKIP_TEST | \ + UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\ + .uartclk = PIC_CLKS_PER_SEC, \ + .type = PORT_16550A, \ + .serial_in = nlm_xlr_uart_in, \ + .serial_out = nlm_xlr_uart_out, \ + } + +static struct plat_serial8250_port xlr_uart_data[] = { + PORT(PIC_UART_0_IRQ), + PORT(PIC_UART_1_IRQ), + {}, +}; + +static struct platform_device uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xlr_uart_data, + }, +}; + +static int __init nlm_uart_init(void) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + xlr_uart_data[0].membase = (void __iomem *)mmio; + xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio); + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET); + xlr_uart_data[1].membase = (void __iomem *)mmio; + xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio); + + return platform_device_register(&uart_device); +} + +arch_initcall(nlm_uart_init); diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c new file mode 100644 index 0000000..4828025 --- /dev/null +++ b/arch/mips/netlogic/xlr/setup.c @@ -0,0 +1,188 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/bootinfo.h> +#include <asm/smp-ops.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/psb-bootinfo.h> + +#include <asm/netlogic/xlr/xlr.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/gpio.h> + +unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE); +unsigned long nlm_common_ebase = 0x0; +struct psb_info nlm_prom_info; + +static void nlm_early_serial_setup(void) +{ + struct uart_port s; + nlm_reg_t *uart_base; + + uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + memset(&s, 0, sizeof(s)); + s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + s.iotype = UPIO_MEM32; + s.regshift = 2; + s.irq = PIC_UART_0_IRQ; + s.uartclk = PIC_CLKS_PER_SEC; + s.serial_in = nlm_xlr_uart_in; + s.serial_out = nlm_xlr_uart_out; + s.mapbase = (unsigned long)uart_base; + s.membase = (unsigned char __iomem *)uart_base; + early_serial_setup(&s); +} + +static void nlm_linux_exit(void) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET); + /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ + netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1); + for ( ; ; ) + cpu_wait(); +} + +void __init plat_mem_setup(void) +{ + panic_timeout = 5; + _machine_restart = (void (*)(char *))nlm_linux_exit; + _machine_halt = nlm_linux_exit; + pm_power_off = nlm_linux_exit; +} + +const char *get_system_type(void) +{ + return "Netlogic XLR/XLS Series"; +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing yet */ +} + +static void build_arcs_cmdline(int *argv) +{ + int i, remain, len; + char *arg; + + remain = sizeof(arcs_cmdline) - 1; + arcs_cmdline[0] = '\0'; + for (i = 0; argv[i] != 0; i++) { + arg = (char *)(long)argv[i]; + len = strlen(arg); + if (len + 1 > remain) + break; + strcat(arcs_cmdline, arg); + strcat(arcs_cmdline, " "); + remain -= len + 1; + } + + /* Add the default options here */ + if ((strstr(arcs_cmdline, "console=")) == NULL) { + arg = "console=ttyS0,38400 "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#ifdef CONFIG_BLK_DEV_INITRD + if ((strstr(arcs_cmdline, "rdinit=")) == NULL) { + arg = "rdinit=/sbin/init "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#endif + return; +fail: + panic("Cannot add %s, command line too big!", arg); +} + +static void prom_add_memory(void) +{ + struct nlm_boot_mem_map *bootm; + u64 start, size; + u64 pref_backup = 512; /* avoid pref walking beyond end */ + int i; + + bootm = (void *)(long)nlm_prom_info.psb_mem_map; + for (i = 0; i < bootm->nr_map; i++) { + if (bootm->map[i].type != BOOT_MEM_RAM) + continue; + start = bootm->map[i].addr; + size = bootm->map[i].size; + + /* Work around for using bootloader mem */ + if (i == 0 && start == 0 && size == 0x0c000000) + size = 0x0ff00000; + + add_memory_region(start, size - pref_backup, BOOT_MEM_RAM); + } +} + +void __init prom_init(void) +{ + int *argv, *envp; /* passed as 32 bit ptrs */ + struct psb_info *prom_infop; + + /* truncate to 32 bit and sign extend all args */ + argv = (int *)(long)(int)fw_arg1; + envp = (int *)(long)(int)fw_arg2; + prom_infop = (struct psb_info *)(long)(int)fw_arg3; + + nlm_prom_info = *prom_infop; + + nlm_early_serial_setup(); + build_arcs_cmdline(argv); + nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); + prom_add_memory(); + +#ifdef CONFIG_SMP + nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map); + register_smp_ops(&nlm_smp_ops); +#endif +} diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c new file mode 100644 index 0000000..b495a7f --- /dev/null +++ b/arch/mips/netlogic/xlr/smp.c @@ -0,0 +1,225 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/mmu_context.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/mips-extns.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +void core_send_ipi(int logical_cpu, unsigned int action) +{ + int cpu = cpu_logical_map(logical_cpu); + u32 tid = cpu & 0x3; + u32 pid = (cpu >> 2) & 0x07; + u32 ipi = (tid << 16) | (pid << 20); + + if (action & SMP_CALL_FUNCTION) + ipi |= IRQ_IPI_SMP_FUNCTION; + else if (action & SMP_RESCHEDULE_YOURSELF) + ipi |= IRQ_IPI_SMP_RESCHEDULE; + else + return; + + pic_send_ipi(ipi); +} + +void nlm_send_ipi_single(int cpu, unsigned int action) +{ + core_send_ipi(cpu, action); +} + +void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) +{ + int cpu; + + for_each_cpu(cpu, mask) { + core_send_ipi(cpu, action); + } +} + +/* IRQ_IPI_SMP_FUNCTION Handler */ +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc) +{ + smp_call_function_interrupt(); +} + +/* IRQ_IPI_SMP_RESCHEDULE handler */ +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc) +{ + set_need_resched(); +} + +void nlm_common_ipi_handler(int irq, struct pt_regs *regs) +{ + if (irq == IRQ_IPI_SMP_FUNCTION) { + smp_call_function_interrupt(); + } else { + /* Announce that we are for reschduling */ + set_need_resched(); + } +} + +/* + * Called before going into mips code, early cpu init + */ +void nlm_early_init_secondary(void) +{ + write_c0_ebase((uint32_t)nlm_common_ebase); + /* TLB partition here later */ +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void __cpuinit nlm_init_secondary(void) +{ + nlm_smp_irq_init(); +} + +void nlm_smp_finish(void) +{ +#ifdef notyet + nlm_common_msgring_cpu_init(); +#endif +} + +void nlm_cpus_done(void) +{ +} + +/* + * Boot all other cpus in the system, initialize them, and bring them into + * the boot function + */ +int nlm_cpu_unblock[NR_CPUS]; +int nlm_cpu_ready[NR_CPUS]; +unsigned long nlm_next_gp; +unsigned long nlm_next_sp; +cpumask_t phys_cpu_present_map; + +void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) +{ + unsigned long gp = (unsigned long)task_thread_info(idle); + unsigned long sp = (unsigned long)__KSTK_TOS(idle); + int cpu = cpu_logical_map(logical_cpu); + + nlm_next_sp = sp; + nlm_next_gp = gp; + + /* barrier */ + __sync(); + nlm_cpu_unblock[cpu] = 1; +} + +void __init nlm_smp_setup(void) +{ + unsigned int boot_cpu; + int num_cpus, i; + + boot_cpu = hard_smp_processor_id(); + cpus_clear(phys_cpu_present_map); + + cpu_set(boot_cpu, phys_cpu_present_map); + __cpu_number_map[boot_cpu] = 0; + __cpu_logical_map[0] = boot_cpu; + cpu_set(0, cpu_possible_map); + + num_cpus = 1; + for (i = 0; i < NR_CPUS; i++) { + if (nlm_cpu_ready[i]) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = num_cpus; + __cpu_logical_map[num_cpus] = i; + cpu_set(num_cpus, cpu_possible_map); + ++num_cpus; + } + } + + pr_info("Phys CPU present map: %lx, possible map %lx\n", + (unsigned long)phys_cpu_present_map.bits[0], + (unsigned long)cpu_possible_map.bits[0]); + + pr_info("Detected %i Slave CPU(s)\n", num_cpus); +} + +void nlm_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops nlm_smp_ops = { + .send_ipi_single = nlm_send_ipi_single, + .send_ipi_mask = nlm_send_ipi_mask, + .init_secondary = nlm_init_secondary, + .smp_finish = nlm_smp_finish, + .cpus_done = nlm_cpus_done, + .boot_secondary = nlm_boot_secondary, + .smp_setup = nlm_smp_setup, + .prepare_cpus = nlm_prepare_cpus, +}; + +unsigned long secondary_entry_point; + +int nlm_wakeup_secondary_cpus(u32 wakeup_mask) +{ + unsigned int tid, pid, ipi, i, boot_cpu; + void *reset_vec; + + secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus; + reset_vec = (void *)CKSEG1ADDR(0x1fc00000); + memcpy(reset_vec, nlm_boot_smp_nmi, 0x80); + boot_cpu = hard_smp_processor_id(); + + for (i = 0; i < NR_CPUS; i++) { + if (i == boot_cpu) + continue; + if (wakeup_mask & (1u << i)) { + tid = i & 0x3; + pid = (i >> 2) & 0x7; + ipi = (tid << 16) | (pid << 20) | (1 << 8); + pic_send_ipi(ipi); + } + } + + return 0; +} diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S new file mode 100644 index 0000000..b8e0744 --- /dev/null +++ b/arch/mips/netlogic/xlr/smpboot.S @@ -0,0 +1,94 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> + + +/* Don't jump to linux function from Bootloader stack. Change it + * here. Kernel might allocate bootloader memory before all the CPUs are + * brought up (eg: Inode cache region) and we better don't overwrite this + * memory + */ +NESTED(prom_pre_boot_secondary_cpus, 16, sp) + .set mips64 + mfc0 t0, $15, 1 # read ebase + andi t0, 0x1f # t0 has the processor_id() + sll t0, 2 # offset in cpu array + + PTR_LA t1, nlm_cpu_ready # mark CPU ready + PTR_ADDU t1, t0 + li t2, 1 + sw t2, 0(t1) + + PTR_LA t1, nlm_cpu_unblock + PTR_ADDU t1, t0 +1: lw t2, 0(t1) # wait till unblocked + beqz t2, 1b + nop + + PTR_LA t1, nlm_next_sp + PTR_L sp, 0(t1) + PTR_LA t1, nlm_next_gp + PTR_L gp, 0(t1) + + PTR_LA t0, nlm_early_init_secondary + jalr t0 + nop + + PTR_LA t0, smp_bootstrap + jr t0 + nop +END(prom_pre_boot_secondary_cpus) + +NESTED(nlm_boot_smp_nmi, 0, sp) + .set push + .set noat + .set mips64 + .set noreorder + + /* Clear the NMI and BEV bits */ + MFC0 k0, CP0_STATUS + li k1, 0xffb7ffff + and k0, k0, k1 + MTC0 k0, CP0_STATUS + + PTR_LA k1, secondary_entry_point + PTR_L k0, 0(k1) + jr k0 + nop + .set pop +END(nlm_boot_smp_nmi) diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/xlr/time.c new file mode 100644 index 0000000..0d81b26 --- /dev/null +++ b/arch/mips/netlogic/xlr/time.c @@ -0,0 +1,51 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> + +#include <asm/time.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/psb-bootinfo.h> + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return IRQ_TIMER; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = nlm_prom_info.cpu_frequency; + pr_info("MIPS counter frequency [%ld]\n", + (unsigned long)mips_hpt_frequency); +} diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/netlogic/xlr/xlr_console.c new file mode 100644 index 0000000..759df06 --- /dev/null +++ b/arch/mips/netlogic/xlr/xlr_console.c @@ -0,0 +1,46 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <asm/netlogic/xlr/iomap.h> + +void prom_putchar(char c) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + while (netlogic_read_reg(mmio, 0x5) == 0) + ; + netlogic_write_reg(mmio, 0x0, c); +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c9209ca..4df8799 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o +obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o @@ -55,6 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o +obj-$(CONFIG_NLM_XLR) += pci-xlr.o ifdef CONFIG_PCI_MSI obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c new file mode 100644 index 0000000..1f2afb5 --- /dev/null +++ b/arch/mips/pci/ops-lantiq.c @@ -0,0 +1,116 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <asm/addrspace.h> +#include <linux/vmalloc.h> + +#include <lantiq_soc.h> + +#include "pci-lantiq.h" + +#define LTQ_PCI_CFG_BUSNUM_SHF 16 +#define LTQ_PCI_CFG_DEVNUM_SHF 11 +#define LTQ_PCI_CFG_FUNNUM_SHF 8 + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int devfn, unsigned int where, u32 *data) +{ + unsigned long cfg_base; + unsigned long flags; + u32 temp; + + /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the + SoC itself */ + if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) + || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) + return 1; + + spin_lock_irqsave(&ebu_lock, flags); + + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn << + LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); + + /* Perform access */ + if (access_type == PCI_ACCESS_WRITE) { + ltq_w32(swab32(*data), ((u32 *)cfg_base)); + } else { + *data = ltq_r32(((u32 *)(cfg_base))); + *data = swab32(*data); + } + wmb(); + + /* clean possible Master abort */ + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; + temp = ltq_r32(((u32 *)(cfg_base))); + temp = swab32(temp); + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; + ltq_w32(temp, ((u32 *)cfg_base)); + + spin_unlock_irqrestore(&ebu_lock, flags); + + if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) + return 1; + + return 0; +} + +int ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data = 0; + + if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +int ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data = 0; + + if (size == 4) { + data = val; + } else { + if (ltq_pci_config_access(PCI_ACCESS_READ, bus, + devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + } + + if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 68798f8..8fbfbf2 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -344,7 +344,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id) * PCI_ACCESS_WRITE and PCI_ACCESS_READ. * * bus - pointer to the bus number of the device to - * be targetted for the configuration cycle. + * be targeted for the configuration cycle. * The only element of the pci_bus structure * used is bus->number. This argument determines * if the configuration access will be Type 0 or @@ -354,7 +354,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id) * * devfn - this is an 8-bit field. The lower three bits * specify the function number of the device to - * be targetted for the configuration cycle, with + * be targeted for the configuration cycle, with * all three-bit combinations being legal. The * upper five bits specify the device number, * with legal values being 10 to 31. diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 6f5e24c..af8c319 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -210,7 +210,7 @@ static int __init bcm1480_pcibios_init(void) PCIBIOS_MIN_IO = 0x00008000UL; PCIBIOS_MIN_MEM = 0x01000000UL; - /* Set I/O resource limits. - unlimited for now to accomodate HT */ + /* Set I/O resource limits. - unlimited for now to accommodate HT */ ioport_resource.end = 0xffffffffUL; iomem_resource.end = 0xffffffffUL; diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c new file mode 100644 index 0000000..603d749 --- /dev/null +++ b/arch/mips/pci/pci-lantiq.c @@ -0,0 +1,297 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/platform_device.h> + +#include <asm/pci.h> +#include <asm/gpio.h> +#include <asm/addrspace.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "pci-lantiq.h" + +#define LTQ_PCI_CFG_BASE 0x17000000 +#define LTQ_PCI_CFG_SIZE 0x00008000 +#define LTQ_PCI_MEM_BASE 0x18000000 +#define LTQ_PCI_MEM_SIZE 0x02000000 +#define LTQ_PCI_IO_BASE 0x1AE00000 +#define LTQ_PCI_IO_SIZE 0x00200000 + +#define PCI_CR_FCI_ADDR_MAP0 0x00C0 +#define PCI_CR_FCI_ADDR_MAP1 0x00C4 +#define PCI_CR_FCI_ADDR_MAP2 0x00C8 +#define PCI_CR_FCI_ADDR_MAP3 0x00CC +#define PCI_CR_FCI_ADDR_MAP4 0x00D0 +#define PCI_CR_FCI_ADDR_MAP5 0x00D4 +#define PCI_CR_FCI_ADDR_MAP6 0x00D8 +#define PCI_CR_FCI_ADDR_MAP7 0x00DC +#define PCI_CR_CLK_CTRL 0x0000 +#define PCI_CR_PCI_MOD 0x0030 +#define PCI_CR_PC_ARB 0x0080 +#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 +#define PCI_CR_BAR11MASK 0x0044 +#define PCI_CR_BAR12MASK 0x0048 +#define PCI_CR_BAR13MASK 0x004C +#define PCI_CS_BASE_ADDR1 0x0010 +#define PCI_CR_PCI_ADDR_MAP11 0x0064 +#define PCI_CR_FCI_BURST_LENGTH 0x00E8 +#define PCI_CR_PCI_EOI 0x002C +#define PCI_CS_STS_CMD 0x0004 + +#define PCI_MASTER0_REQ_MASK_2BITS 8 +#define PCI_MASTER1_REQ_MASK_2BITS 10 +#define PCI_MASTER2_REQ_MASK_2BITS 12 +#define INTERNAL_ARB_ENABLE_BIT 0 + +#define LTQ_CGU_IFCCR 0x0018 +#define LTQ_CGU_PCICR 0x0034 + +#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) +#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) + +#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) +#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) + +struct ltq_pci_gpio_map { + int pin; + int alt0; + int alt1; + int dir; + char *name; +}; + +/* the pci core can make use of the following gpios */ +static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = { + { 0, 1, 0, 0, "pci-exin0" }, + { 1, 1, 0, 0, "pci-exin1" }, + { 2, 1, 0, 0, "pci-exin2" }, + { 39, 1, 0, 0, "pci-exin3" }, + { 10, 1, 0, 0, "pci-exin4" }, + { 9, 1, 0, 0, "pci-exin5" }, + { 30, 1, 0, 1, "pci-gnt1" }, + { 23, 1, 0, 1, "pci-gnt2" }, + { 19, 1, 0, 1, "pci-gnt3" }, + { 38, 1, 0, 1, "pci-gnt4" }, + { 29, 1, 0, 0, "pci-req1" }, + { 31, 1, 0, 0, "pci-req2" }, + { 3, 1, 0, 0, "pci-req3" }, + { 37, 1, 0, 0, "pci-req4" }, +}; + +__iomem void *ltq_pci_mapped_cfg; +static __iomem void *ltq_pci_membase; + +int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL; + +/* Since the PCI REQ pins can be reused for other functionality, make it + possible to exclude those from interpretation by the PCI controller */ +static int ltq_pci_req_mask = 0xf; + +static int *ltq_pci_irq_map; + +struct pci_ops ltq_pci_ops = { + .read = ltq_pci_read_config_dword, + .write = ltq_pci_write_config_dword +}; + +static struct resource pci_io_resource = { + .name = "pci io space", + .start = LTQ_PCI_IO_BASE, + .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = LTQ_PCI_MEM_BASE, + .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller ltq_pci_controller = { + .pci_ops = <q_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &pci_io_resource, + .io_offset = 0x00000000UL, +}; + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (ltqpci_plat_dev_init) + return ltqpci_plat_dev_init(dev); + + return 0; +} + +static u32 ltq_calc_bar11mask(void) +{ + u32 mem, bar11mask; + + /* BAR11MASK value depends on available memory on system. */ + mem = num_physpages * PAGE_SIZE; + bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; + + return bar11mask; +} + +static void ltq_pci_setup_gpio(int gpio) +{ + int i; + for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) { + if (gpio & (1 << i)) { + ltq_gpio_request(ltq_pci_gpio_map[i].pin, + ltq_pci_gpio_map[i].alt0, + ltq_pci_gpio_map[i].alt1, + ltq_pci_gpio_map[i].dir, + ltq_pci_gpio_map[i].name); + } + } + ltq_gpio_request(21, 0, 0, 1, "pci-reset"); + ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK; +} + +static int __devinit ltq_pci_startup(struct ltq_pci_data *conf) +{ + u32 temp_buffer; + + /* set clock to 33Mhz */ + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR); + + /* external or internal clock ? */ + if (conf->clock) { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16), + LTQ_CGU_IFCCR); + ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR); + } else { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16), + LTQ_CGU_IFCCR); + ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR); + } + + /* setup pci clock and gpis used by pci */ + ltq_pci_setup_gpio(conf->gpio); + + /* enable auto-switching between PCI and EBU */ + ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); + + /* busy, i.e. configuration is not done, PCI access has to be retried */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); + wmb(); + /* BUS Master/IO/MEM access */ + ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); + + /* enable external 2 PCI masters */ + temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); + temp_buffer &= (~(ltq_pci_req_mask << 16)); + /* enable internal arbiter */ + temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); + /* enable internal PCI master reqest */ + temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); + + /* enable EBU request */ + temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); + + /* enable all external masters request */ + temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); + ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); + wmb(); + + /* setup BAR memory regions */ + ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); + ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); + ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); + ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); + ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); + ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); + ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); + ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); + ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); + ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); + ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); + ltq_pci_w32(0, PCI_CS_BASE_ADDR1); + /* both TX and RX endian swap are enabled */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); + wmb(); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, + PCI_CR_BAR12MASK); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, + PCI_CR_BAR13MASK); + /*use 8 dw burst length */ + ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); + wmb(); + + /* setup irq line */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); + + /* toggle reset pin */ + __gpio_set_value(21, 0); + wmb(); + mdelay(1); + __gpio_set_value(21, 1); + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ltq_pci_irq_map[slot]) + return ltq_pci_irq_map[slot]; + printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n", + slot); + + return 0; +} + +static int __devinit ltq_pci_probe(struct platform_device *pdev) +{ + struct ltq_pci_data *ltq_pci_data = + (struct ltq_pci_data *) pdev->dev.platform_data; + pci_probe_only = 0; + ltq_pci_irq_map = ltq_pci_data->irq; + ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE); + ltq_pci_mapped_cfg = + ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE); + ltq_pci_controller.io_map_base = + (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1); + ltq_pci_startup(ltq_pci_data); + register_pci_controller(<q_pci_controller); + + return 0; +} + +static struct platform_driver +ltq_pci_driver = { + .probe = ltq_pci_probe, + .driver = { + .name = "ltq_pci", + .owner = THIS_MODULE, + }, +}; + +int __init pcibios_init(void) +{ + int ret = platform_driver_register(<q_pci_driver); + if (ret) + printk(KERN_INFO "ltq_pci: Error registering platfom driver!"); + return ret; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h new file mode 100644 index 0000000..66bf6cd --- /dev/null +++ b/arch/mips/pci/pci-lantiq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_PCI_H__ +#define _LTQ_PCI_H__ + +extern __iomem void *ltq_pci_mapped_cfg; +extern int ltq_pci_read_config_dword(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val); +extern int ltq_pci_write_config_dword(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val); + +#endif diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index 2d74fc9..ed1c542 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -441,7 +441,7 @@ static void octeon_pci_initialize(void) /* * TDOMC must be set to one in PCI mode. TDOMC should be set to 4 - * in PCI-X mode to allow four oustanding splits. Otherwise, + * in PCI-X mode to allow four outstanding splits. Otherwise, * should not change from its reset value. Don't write PCI_CFG19 * in PCI mode (0x82000001 reset value), write it to 0x82000004 * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero. @@ -515,7 +515,7 @@ static void octeon_pci_initialize(void) #endif /* USE_OCTEON_INTERNAL_ARBITER */ /* - * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE, + * Preferably written to 1 to set MLTD. [RDSATI,TRTAE, * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to * 1..7. */ diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c new file mode 100644 index 0000000..38fece1 --- /dev/null +++ b/arch/mips/pci/pci-xlr.c @@ -0,0 +1,214 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> + +#include <asm/io.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +static void *pci_config_base; + +#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) + +/* PCI ops */ +static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, + int where) +{ + u32 data; + u32 *cfgaddr; + + cfgaddr = (u32 *)(pci_config_base + + pci_cfg_addr(bus->number, devfn, where & ~3)); + data = *cfgaddr; + return cpu_to_le32(data); +} + +static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn, + int where, u32 data) +{ + u32 *cfgaddr; + + cfgaddr = (u32 *)(pci_config_base + + pci_cfg_addr(bus->number, devfn, where & ~3)); + *cfgaddr = cpu_to_le32(data); +} + +static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = pci_cfg_read_32bit(bus, devfn, where); + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + + +static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = pci_cfg_read_32bit(bus, devfn, where); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + pci_cfg_write_32bit(bus, devfn, where, data); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops nlm_pci_ops = { + .read = nlm_pcibios_read, + .write = nlm_pcibios_write +}; + +static struct resource nlm_pci_mem_resource = { + .name = "XLR PCI MEM", + .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ + .end = 0xdfffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource nlm_pci_io_resource = { + .name = "XLR IO MEM", + .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ + .end = 0x100fffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller nlm_pci_controller = { + .index = 0, + .pci_ops = &nlm_pci_ops, + .mem_resource = &nlm_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &nlm_pci_io_resource, + .io_offset = 0x00000000UL, +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (!nlm_chip_is_xls()) + return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ + + /* + * For XLS PCIe, there is an IRQ per Link, find out which + * link the device is on to assign interrupts + */ + if (dev->bus->self == NULL) + return 0; + + switch (dev->bus->self->devfn) { + case 0x0: + return PIC_PCIE_LINK0_IRQ; + case 0x8: + return PIC_PCIE_LINK1_IRQ; + case 0x10: + if (nlm_chip_is_xls_b()) + return PIC_PCIE_XLSB0_LINK2_IRQ; + else + return PIC_PCIE_LINK2_IRQ; + case 0x18: + if (nlm_chip_is_xls_b()) + return PIC_PCIE_XLSB0_LINK3_IRQ; + else + return PIC_PCIE_LINK3_IRQ; + } + WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); + return 0; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static int __init pcibios_init(void) +{ + /* PSB assigns PCI resources */ + pci_probe_only = 1; + pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); + + /* Extend IO port for memory mapped io */ + ioport_resource.start = 0; + ioport_resource.end = ~0; + + set_io_port_base(CKSEG1); + nlm_pci_controller.io_map_base = CKSEG1; + + pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n"); + register_pci_controller(&nlm_pci_controller); + + return 0; +} + +arch_initcall(pcibios_init); + +struct pci_fixup pcibios_fixups[] = { + {0} +}; diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 38bc280..33bba7b 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -125,7 +125,7 @@ void __devinit register_pci_controller(struct pci_controller *hose) hose_tail = &hose->next; /* - * Do not panic here but later - this might hapen before console init. + * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { printk(KERN_WARNING diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c index f9b9dcd..98fd009 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c @@ -97,7 +97,7 @@ static int msp_per_irq_set_affinity(struct irq_data *d, static struct irq_chip msp_per_irq_controller = { .name = "MSP_PER", - .irq_enable = unmask_per_irq. + .irq_enable = unmask_per_irq, .irq_disable = mask_per_irq, .irq_ack = msp_per_irq_ack, #ifdef CONFIG_SMP diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index fb37a10..2413ea6 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -239,7 +239,7 @@ void __init prom_init(void) #ifdef CONFIG_PMCTWILED /* * Setup LED states before the subsys_initcall loads other - * dependant drivers/modules. + * dependent drivers/modules. */ pmctwiled_setup(); #endif diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index efc9e88..2608752 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -55,6 +55,8 @@ void titan_mailbox_irq(void) if (status & 0x2) smp_call_function_interrupt(); + if (status & 0x4) + scheduler_ipi(); break; case 1: @@ -63,6 +65,8 @@ void titan_mailbox_irq(void) if (status & 0x2) smp_call_function_interrupt(); + if (status & 0x4) + scheduler_ipi(); break; } } diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index ce45df1..87167dc 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -165,7 +165,7 @@ static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { { .base = PNX833X_I2C0_PORTS_START, .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ + .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */ .bus_addr = 0, /* no slave support */ }, { diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index dbb5c7b..f8a751c 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -35,7 +35,7 @@ LEAF(swsusp_arch_resume) 0: PTR_L t1, PBE_ADDRESS(t0) /* source */ PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */ - PTR_ADDIU t3, t1, PAGE_SIZE + PTR_ADDU t3, t1, PAGE_SIZE 1: REG_L t8, (t1) REG_S t8, (t2) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 37de05d..6c47dfe 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -185,7 +185,7 @@ int __init rb532_gpio_init(void) struct resource *r; r = rb532_gpio_reg0_res; - rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start); + rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r)); if (!rb532_gpio_chip->regbase) { printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index deddbf0..698904d 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -132,7 +132,7 @@ static struct platform_device eth1_device = { */ static int __init sgiseeq_devinit(void) { - unsigned int tmp; + unsigned int pbdma __maybe_unused; int res, i; eth0_pd.hpc = hpc3c0; @@ -151,7 +151,7 @@ static int __init sgiseeq_devinit(void) /* Second HPC is missing? */ if (ip22_is_fullhouse() || - get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) + get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1])) return 0; sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 | diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 603fc91..1a94c98 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -32,7 +32,7 @@ static unsigned long dosample(void) { u32 ct0, ct1; - u8 msb, lsb; + u8 msb; /* Start the counter. */ sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | @@ -46,7 +46,7 @@ static unsigned long dosample(void) /* Latch and spin until top byte of counter2 is zero */ do { writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword); - lsb = readb(&sgint->tcnt2); + (void) readb(&sgint->tcnt2); msb = readb(&sgint->tcnt2); ct1 = read_c0_count(); } while (msb); diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig index 5e960ae..bc5e976 100644 --- a/arch/mips/sgi-ip27/Kconfig +++ b/arch/mips/sgi-ip27/Kconfig @@ -1,7 +1,7 @@ #config SGI_SN0_XXL # bool "IP27 XXL" # depends on SGI_IP27 -# This options adds support for userspace processes upto 16TB size. +# This options adds support for userspace processes up to 16TB size. # Normally the limit is just .5TB. choice diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO index 19f1512..160857f 100644 --- a/arch/mips/sgi-ip27/TODO +++ b/arch/mips/sgi-ip27/TODO @@ -13,7 +13,7 @@ being invoked on all nodes in ip27-memory.c. 9. start_thread must turn off UX64 ... and define tlb_refill_debug. 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable does not agree with pgd_bad/pmd_bad. -11. All intrs (ip27_do_irq handlers) are targetted at cpu A on the node. +11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node. This might need to change later. Only the timer intr is set up to be received on both Cpu A and B. (ip27_do_irq()/bridge_startup()) 13. Cache flushing (specially the SMP version) has to be investigated. diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index a1fa4ab..cd0d5b0 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -29,7 +29,6 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size) { nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - volatile hubreg_t junk; unsigned i; /* use small-window mapping if possible */ @@ -64,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, * after we write it. */ IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - junk = HUB_L(IIO_ITTE_GET(nasid, i)); + (void) HUB_L(IIO_ITTE_GET(nasid, i)); return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); } diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 51d3a4f..923c080 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -93,7 +93,7 @@ static void __cpuinit per_hub_init(cnodeid_t cnode) /* * Some interrupts are reserved by hardware or by software convention. - * Mark these as reserved right away so they won't be used accidently + * Mark these as reserved right away so they won't be used accidentally * later. */ for (i = 0; i <= BASE_PCI_IRQ; i++) { diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 1148871..b18b04e 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -41,7 +41,7 @@ * Linux has a controller-independent x86 interrupt architecture. * every controller has a 'controller-template', that is used * by the main code to do the right thing. Each driver-visible - * interrupt source is transparently wired to the apropriate + * interrupt source is transparently wired to the appropriate * controller. Thus drivers need not be aware of the * interrupt-controller. * @@ -147,8 +147,10 @@ static void ip27_do_irq_mask0(void) #ifdef CONFIG_SMP if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); smp_call_function_interrupt(); diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index c3d30a8..1d1919a 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -54,11 +54,8 @@ void __init setup_replication_mask(void) static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid) { - cnodeid_t client_cnode; kern_vars_t *kvp; - client_cnode = NASID_TO_COMPACT_NODEID(client_nasid); - kvp = &hub_data(client_nasid)->kern_vars; KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index a152538..ef74f32 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -66,18 +66,7 @@ static int rt_next_event(unsigned long delta, struct clock_event_device *evt) static void rt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - /* The only mode supported */ - break; - - case CLOCK_EVT_MODE_PERIODIC: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do */ - break; - } + /* Nothing to do ... */ } int rt_timer_irq; @@ -174,8 +163,7 @@ static void __init hub_rt_clocksource_init(void) { struct clocksource *cs = &hub_rt_clocksource; - clocksource_set_clock(cs, CYCLES_PER_SEC); - clocksource_register(cs); + clocksource_register_hz(cs, CYCLES_PER_SEC); } void __init plat_time_init(void) diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index 47b347c..d667875 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/smp.h> #include <linux/kernel_stat.h> +#include <linux/sched.h> #include <asm/mmu_context.h> #include <asm/io.h> @@ -189,10 +190,8 @@ void bcm1480_mailbox_interrupt(void) /* Clear the mailbox to clear the interrupt */ __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]); - /* - * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the - * interrupt will do the reschedule for us - */ + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index c00a5cb..38e7f6b 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> #include <linux/kernel_stat.h> +#include <linux/sched.h> #include <asm/mmu_context.h> #include <asm/io.h> @@ -177,10 +178,8 @@ void sb1250_mailbox_interrupt(void) /* Clear the mailbox to clear the interrupt */ ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); - /* - * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the - * interrupt will do the reschedule for us - */ + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index c76151b..0904d4d 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -95,7 +95,7 @@ static void __init sni_a20r_timer_setup(void) static __init unsigned long dosample(void) { u32 ct0, ct1; - volatile u8 msb, lsb; + volatile u8 msb; /* Start the counter. */ outb_p(0x34, 0x43); @@ -108,7 +108,7 @@ static __init unsigned long dosample(void) /* Latch and spin until top byte of counter0 is zero */ do { outb(0x00, 0x43); - lsb = inb(0x40); + (void) inb(0x40); msb = inb(0x40); ct1 = read_c0_count(); } while (msb); diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 90ed4a3..c54effa 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -49,7 +49,7 @@ asm(" .am33_2\n"); #define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ #define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ #define EPSW_IE 0x00000800 /* interrupt enable */ -#define EPSW_S 0x00003000 /* software auxilliary bits */ +#define EPSW_S 0x00003000 /* software auxiliary bits */ #define EPSW_T 0x00008000 /* trace enable */ #define EPSW_nSL 0x00010000 /* not supervisor level */ #define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c index 226c826..83fb279 100644 --- a/arch/mn10300/kernel/smp.c +++ b/arch/mn10300/kernel/smp.c @@ -494,14 +494,11 @@ void smp_send_stop(void) * @irq: The interrupt number. * @dev_id: The device ID. * - * We need do nothing here, since the scheduling will be effected on our way - * back through entry.S. - * * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. */ static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) { - /* do nothing */ + scheduler_ipi(); return IRQ_HANDLED; } diff --git a/arch/parisc/include/asm/eisa_eeprom.h b/arch/parisc/include/asm/eisa_eeprom.h index 9c9da98..8ce8b85 100644 --- a/arch/parisc/include/asm/eisa_eeprom.h +++ b/arch/parisc/include/asm/eisa_eeprom.h @@ -27,7 +27,7 @@ struct eeprom_header u_int8_t ver_maj; u_int8_t ver_min; u_int8_t num_slots; /* number of EISA slots in system */ - u_int16_t csum; /* checksum, I don't know how to calulate this */ + u_int16_t csum; /* checksum, I don't know how to calculate this */ u_int8_t pad[10]; } __attribute__ ((packed)); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index e547709..ead8d2a 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -187,8 +187,8 @@ /* Register definitions for tlb miss handler macros */ - va = r8 /* virtual address for which the trap occured */ - spc = r24 /* space for which the trap occured */ + va = r8 /* virtual address for which the trap occurred */ + spc = r24 /* space for which the trap occurred */ #ifndef CONFIG_64BIT @@ -882,7 +882,7 @@ ENTRY(syscall_exit_rfi) * (we don't store them in the sigcontext), so set them * to "proper" values now (otherwise we'll wind up restoring * whatever was last stored in the task structure, which might - * be inconsistent if an interrupt occured while on the gateway + * be inconsistent if an interrupt occurred while on the gateway * page). Note that we may be "trashing" values the user put in * them, but we don't support the user changing them. */ @@ -1156,11 +1156,11 @@ ENDPROC(intr_save) */ t0 = r1 /* temporary register 0 */ - va = r8 /* virtual address for which the trap occured */ + va = r8 /* virtual address for which the trap occurred */ t1 = r9 /* temporary register 1 */ pte = r16 /* pte/phys page # */ prot = r17 /* prot bits */ - spc = r24 /* space for which the trap occured */ + spc = r24 /* space for which the trap occurred */ ptp = r25 /* page directory/page table pointer */ #ifdef CONFIG_64BIT diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 4dbdf0e..145c5e4 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -131,7 +131,7 @@ $pgt_fill_loop: ldo THREAD_SZ_ALGN(%r6),%sp #ifdef CONFIG_SMP - /* Set the smp rendevous address into page zero. + /* Set the smp rendezvous address into page zero. ** It would be safer to do this in init_smp_config() but ** it's just way easier to deal with here because ** of 64-bit function ptrs and the address is local to this file. diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index d228d82..08324aa 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -93,7 +93,7 @@ void __init setup_pdc(void) case 0x6: /* 705, 710 */ case 0x7: /* 715, 725 */ case 0x8: /* 745, 747, 742 */ - case 0xA: /* 712 and similiar */ + case 0xA: /* 712 and similar */ case 0xC: /* 715/64, at least */ pdc_type = PDC_TYPE_SNAKE; diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 609a331..12c1ed3 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -291,7 +291,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc); DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall); - /* FIXME: Should probably be converted aswell for the compat case */ + /* FIXME: Should probably be converted as well for the compat case */ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); } diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 69d63d3..828305f 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -155,10 +155,7 @@ ipi_interrupt(int irq, void *dev_id) case IPI_RESCHEDULE: smp_debug(100, KERN_DEBUG "CPU%d IPI_RESCHEDULE\n", this_cpu); - /* - * Reschedule callback. Everything to be - * done is done by the interrupt return path. - */ + scheduler_ipi(); break; case IPI_CALL_FUNC: diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 68e75ce..82a52b2 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -605,7 +605,7 @@ cas_action: copy %r0, %r21 3: - /* Error occured on load or store */ + /* Error occurred on load or store */ /* Free lock */ stw %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 74867df..4be85ee 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -34,7 +34,7 @@ /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where - * the compatability layer has a useful 32-bit implementation. + * the compatibility layer has a useful 32-bit implementation. */ #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys32_##_name_ diff --git a/arch/parisc/math-emu/dfadd.c b/arch/parisc/math-emu/dfadd.c index e147d7d..d37e2d2 100644 --- a/arch/parisc/math-emu/dfadd.c +++ b/arch/parisc/math-emu/dfadd.c @@ -303,7 +303,7 @@ dbl_fadd( if(Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straight forward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/dfsub.c b/arch/parisc/math-emu/dfsub.c index 87ebc60..2e8b5a7 100644 --- a/arch/parisc/math-emu/dfsub.c +++ b/arch/parisc/math-emu/dfsub.c @@ -306,7 +306,7 @@ dbl_fsub( if(Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straight forward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/fmpyfadd.c b/arch/parisc/math-emu/fmpyfadd.c index 5dd7f93..b067c45 100644 --- a/arch/parisc/math-emu/fmpyfadd.c +++ b/arch/parisc/math-emu/fmpyfadd.c @@ -531,7 +531,7 @@ dbl_fmpyfadd( sign_save = Dbl_signextendedsign(resultp1); if (Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -1191,7 +1191,7 @@ unsigned int *status; sign_save = Dbl_signextendedsign(resultp1); if (Dbl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -1841,7 +1841,7 @@ unsigned int *status; sign_save = Sgl_signextendedsign(resultp1); if (Sgl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most @@ -2483,7 +2483,7 @@ unsigned int *status; sign_save = Sgl_signextendedsign(resultp1); if (Sgl_iszero_hidden(resultp1)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the + /* A straightforward algorithm would now shift the * result and extension left until the hidden bit * becomes one. Not all of the extension bits need * participate in the shift. Only the two most diff --git a/arch/parisc/math-emu/sfadd.c b/arch/parisc/math-emu/sfadd.c index 008d721..f802cd6 100644 --- a/arch/parisc/math-emu/sfadd.c +++ b/arch/parisc/math-emu/sfadd.c @@ -298,7 +298,7 @@ sgl_fadd( if(Sgl_iszero_hidden(result)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straightforward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/math-emu/sfsub.c b/arch/parisc/math-emu/sfsub.c index 24eef61..5f90d0f 100644 --- a/arch/parisc/math-emu/sfsub.c +++ b/arch/parisc/math-emu/sfsub.c @@ -301,7 +301,7 @@ sgl_fsub( if(Sgl_iszero_hidden(result)) { /* Handle normalization */ - /* A straight foward algorithm would now shift the result + /* A straightforward algorithm would now shift the result * and extension left until the hidden bit becomes one. Not * all of the extension bits need participate in the shift. * Only the two most significant bits (round and guard) are diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index b7ed8d7..b1d1262 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -266,8 +266,10 @@ static void __init setup_bootmem(void) } memset(pfnnid_map, 0xff, sizeof(pfnnid_map)); - for (i = 0; i < npmem_ranges; i++) + for (i = 0; i < npmem_ranges; i++) { + node_set_state(i, N_NORMAL_MEMORY); node_set_online(i); + } #endif /* diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b6ff882..8f4d50b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -209,7 +209,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x + (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x config PPC_DCR_NATIVE bool diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h index 6b6dc20..bdf0563 100644 --- a/arch/powerpc/include/asm/8xx_immap.h +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -393,8 +393,8 @@ typedef struct fec { uint fec_addr_low; /* lower 32 bits of station address */ ushort fec_addr_high; /* upper 16 bits of station address */ ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_grp_hash_table_high; /* upper 32-bits of hash table */ + uint fec_grp_hash_table_low; /* lower 32-bits of hash table */ uint fec_r_des_start; /* beginning of Rx descriptor ring */ uint fec_x_des_start; /* beginning of Tx descriptor ring */ uint fec_r_buff_size; /* Rx buffer size */ diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 2e56187..f18c6d9 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -209,8 +209,8 @@ static __inline__ unsigned long ffz(unsigned long x) return BITS_PER_LONG; /* - * Calculate the bit position of the least signficant '1' bit in x - * (since x has been changed this will actually be the least signficant + * Calculate the bit position of the least significant '1' bit in x + * (since x has been changed this will actually be the least significant * '0' bit in * the original x). Note: (x & -x) gives us a mask that * is the least significant * (RIGHT-most) 1-bit of the value in x. */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 2296112..91010e8 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -140,7 +140,7 @@ static inline void __user *arch_compat_alloc_user_space(long len) unsigned long usp = regs->gpr[1]; /* - * We cant access below the stack pointer in the 32bit ABI and + * We can't access below the stack pointer in the 32bit ABI and * can access 288 bytes in the 64bit ABI */ if (!is_32bit_task()) diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h index e50323f..4398a6c 100644 --- a/arch/powerpc/include/asm/cpm.h +++ b/arch/powerpc/include/asm/cpm.h @@ -98,7 +98,7 @@ typedef struct cpm_buf_desc { #define BD_SC_INTRPT (0x1000) /* Interrupt on change */ #define BD_SC_LAST (0x0800) /* Last buffer in frame */ #define BD_SC_TC (0x0400) /* Transmit CRC */ -#define BD_SC_CM (0x0200) /* Continous mode */ +#define BD_SC_CM (0x0200) /* Continuous mode */ #define BD_SC_ID (0x0100) /* Rec'd too many idles */ #define BD_SC_P (0x0100) /* xmt preamble */ #define BD_SC_BR (0x0020) /* Break received */ diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index bd07650d..8ee4211 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -4,7 +4,7 @@ * * This file contains structures and information for the communication * processor channels. Some CPM control and status is available - * throught the MPC8xx internal memory map. See immap.h for details. + * through the MPC8xx internal memory map. See immap.h for details. * This file only contains what I need for the moment, not the total * CPM capabilities. I (or someone else) will add definitions as they * are needed. -- Dan diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index be3cdf9..1833d1a 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -382,10 +382,12 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \ CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) -#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ +#define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL) +#define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ @@ -435,11 +437,15 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500) +#else #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) +#endif #else enum { CPU_FTRS_POSSIBLE = @@ -473,16 +479,21 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | + CPU_FTRS_E5500 | #endif 0, }; #endif /* __powerpc64__ */ #ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500) +#else #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) +#endif #else enum { CPU_FTRS_ALWAYS = @@ -513,6 +524,7 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & + CPU_FTRS_E5500 & #endif CPU_FTRS_POSSIBLE, }; diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index ec089ac..8edec71 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -122,7 +122,7 @@ #define H_DABRX_KERNEL (1UL<<(63-62)) #define H_DABRX_USER (1UL<<(63-63)) -/* Each control block has to be on a 4K bondary */ +/* Each control block has to be on a 4K boundary */ #define H_CB_ALIGNMENT 4096 /* pSeries hypervisor opcodes */ diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h index d0e7701..be0171a 100644 --- a/arch/powerpc/include/asm/kprobes.h +++ b/arch/powerpc/include/asm/kprobes.h @@ -50,7 +50,7 @@ typedef unsigned int kprobe_opcode_t; * Handle cases where: * - User passes a <.symbol> or <module:.symbol> * - User passes a <symbol> or <module:symbol> - * - User passes a non-existant symbol, kallsyms_lookup_name + * - User passes a non-existent symbol, kallsyms_lookup_name * returns 0. Don't deref the NULL pointer in that case */ #define kprobe_lookup_name(name, addr) \ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 26b8c80..a077adc 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -105,7 +105,7 @@ struct lppaca { // processing of external interrupts. Note that PLIC will store the // XIRR directly into the xXirrValue field so that another XIRR will // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the + // 4-bytes of this Dword is up to SLIC - PLIC just checks whether the // entire Dword is zero or not. A non-zero value in the low order // 2-bytes will result in SLIC being granted the highest thread // priority upon return. A 0 will return to SLIC as medium priority. diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index 7005ee0..49baddc 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -3,7 +3,6 @@ #ifdef __KERNEL__ #include <linux/irq.h> -#include <linux/sysdev.h> #include <asm/dcr.h> #include <asm/msi_bitmap.h> @@ -320,8 +319,6 @@ struct mpic /* link */ struct mpic *next; - struct sys_device sysdev; - #ifdef CONFIG_PM struct mpic_irq_save *save_data; #endif diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 932f88d..812b2cd 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -169,7 +169,7 @@ do { \ /* * This is the default if a program doesn't have a PT_GNU_STACK * program header entry. The PPC64 ELF ABI has a non executable stack - * stack by default, so in the absense of a PT_GNU_STACK program header + * stack by default, so in the absence of a PT_GNU_STACK program header * we turn execute permission off. */ #define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h index 19fd793..eafa5a5 100644 --- a/arch/powerpc/include/asm/pasemi_dma.h +++ b/arch/powerpc/include/asm/pasemi_dma.h @@ -522,7 +522,7 @@ extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, dma_addr_t *handle); -/* Routines to allocate flags (events) for channel syncronization */ +/* Routines to allocate flags (events) for channel synchronization */ extern int pasemi_dma_alloc_flag(void); extern void pasemi_dma_free_flag(int flag); extern void pasemi_dma_set_flag(int flag); diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 5e156e0..b90dbf8 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -106,7 +106,7 @@ struct pci_controller { * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS * to determine which bus number to match on when generating type0 * config cycles diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h index 00eedc5..10902c9 100644 --- a/arch/powerpc/include/asm/pmac_feature.h +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -53,8 +53,8 @@ /* Here is the infamous serie of OHare based machines */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ +#define PMAC_TYPE_COMET 0x20 /* Believed to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Believed to be PowerBook 3400 */ #define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ #define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ #define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index 76bb195..8d1569c 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -86,7 +86,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); #define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) #endif -/* _PAGE_CHG_MASK masks of bits that are to be preserved accross +/* _PAGE_CHG_MASK masks of bits that are to be preserved across * pgprot changes */ #define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ @@ -162,7 +162,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); * on platforms where such control is possible. */ #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ - defined(CONFIG_KPROBES) + defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) #define PAGE_KERNEL_TEXT PAGE_KERNEL_X #else #define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX @@ -174,7 +174,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); /* * Don't just check for any non zero bits in __PAGE_USER, since for book3e * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in - * _PAGE_USER. Need to explictly match _PAGE_BAP_UR bit in that case too. + * _PAGE_USER. Need to explicitly match _PAGE_BAP_UR bit in that case too. */ #define pte_user(val) ((val & _PAGE_USER) == _PAGE_USER) diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 3b1a9b7..b316794 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -2,7 +2,7 @@ * Contains register definitions common to the Book E PowerPC * specification. Notice that while the IBM-40x series of CPUs * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunatly, + * before Book E was finalized, and are included here as well. Unfortunately, * they sometimes used different locations than true Book E CPUs did. * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h index 25020a3..d8f5c60 100644 --- a/arch/powerpc/include/asm/spu_priv1.h +++ b/arch/powerpc/include/asm/spu_priv1.h @@ -223,7 +223,7 @@ spu_disable_spu (struct spu_context *ctx) } /* - * The declarations folowing are put here for convenience + * The declarations following are put here for convenience * and only intended to be used by the platform setup code. */ diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h index f737732..d12b11d 100644 --- a/arch/powerpc/include/asm/uninorth.h +++ b/arch/powerpc/include/asm/uninorth.h @@ -60,7 +60,7 @@ * * Obviously, the GART is not cache coherent and so any change to it * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. + * cachable). AGP memory itself doesn't seem to be cache coherent neither. * * In order to invalidate the GART (which is probably necessary to inval * the bridge internal TLBs), the following sequence has to be written, diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h index 25e3922..b73a819 100644 --- a/arch/powerpc/include/asm/vdso_datapage.h +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -57,7 +57,7 @@ struct vdso_data { } version; /* Note about the platform flags: it now only contains the lpar - * bit. The actual platform number is dead and burried + * bit. The actual platform number is dead and buried */ __u32 platform; /* Platform flags 0x18 */ __u32 processor; /* Processor type 0x1C */ diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 625942a..60b3e37 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -99,7 +99,7 @@ void __init btext_prepare_BAT(void) /* This function can be used to enable the early boot text when doing * OF booting or within bootx init. It must be followed by a btext_unmap() - * call before the logical address becomes unuseable + * call before the logical address becomes unusable */ void __init btext_setup_display(int width, int height, int depth, int pitch, unsigned long address) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c9b68d0..b9602ee 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1973,7 +1973,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pvr_mask = 0xffff0000, .pvr_value = 0x80240000, .cpu_name = "e5500", - .cpu_features = CPU_FTRS_E500MC, + .cpu_features = CPU_FTRS_E5500, .cpu_user_features = COMMON_USER_BOOKE, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | MMU_FTR_USE_TLBILX, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 3d3d416..5b5e1f0 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -163,7 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu) } /* wait for all the CPUs to hit real mode but timeout if they don't come in */ -#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP) +#ifdef CONFIG_PPC_STD_MMU_64 static void crash_kexec_wait_realmode(int cpu) { unsigned int msecs; @@ -188,9 +188,7 @@ static void crash_kexec_wait_realmode(int cpu) } mb(); } -#else -static inline void crash_kexec_wait_realmode(int cpu) {} -#endif +#endif /* CONFIG_PPC_STD_MMU_64 */ /* * This function will be called by secondary cpus or by kexec cpu @@ -235,7 +233,9 @@ void crash_kexec_secondary(struct pt_regs *regs) crash_ipi_callback(regs); } -#else +#else /* ! CONFIG_SMP */ +static inline void crash_kexec_wait_realmode(int cpu) {} + static void crash_kexec_prepare_cpus(int cpu) { /* @@ -255,7 +255,7 @@ void crash_kexec_secondary(struct pt_regs *regs) { cpus_in_sr = CPU_MASK_NONE; } -#endif +#endif /* CONFIG_SMP */ /* * Register a function to be called on shutdown. Only use this if you diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 5c43063..9651acc 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -379,7 +379,7 @@ interrupt_end_book3e: mfspr r13,SPRN_SPRG_PACA /* get our PACA */ b system_call_common -/* Auxillary Processor Unavailable Interrupt */ +/* Auxiliary Processor Unavailable Interrupt */ START_EXCEPTION(ap_unavailable); NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index c532cb2..aeb739e 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -5,7 +5,7 @@ * handling and other fixed offset specific things. * * This file is meant to be #included from head_64.S due to - * position dependant assembly. + * position dependent assembly. * * Most of this originates from head_64.S and thus has the same * copyright history. diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 9dd21a8..a91626d 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -766,7 +766,7 @@ DataAccess: * miss get to this point to load the TLB. * r10 - TLB_TAG value * r11 - Linux PTE - * r12, r9 - avilable to use + * r12, r9 - available to use * PID - loaded with proper value when we get here * Upon exit, we reload everything and RFI. * Actually, it will fit now, but oh well.....a common place diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index cbb3436..5e12b74 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -178,7 +178,7 @@ interrupt_base: NORMAL_EXCEPTION_PROLOG EXC_XFER_EE_LITE(0x0c00, DoSyscall) - /* Auxillary Processor Unavailable Interrupt */ + /* Auxiliary Processor Unavailable Interrupt */ EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) /* Decrementer Interrupt */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 271140b..3a319f9 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -40,7 +40,7 @@ #include <asm/kvm_book3s_asm.h> #include <asm/ptrace.h> -/* The physical memory is layed out such that the secondary processor +/* The physical memory is laid out such that the secondary processor * spin code sits at 0x0000...0x00ff. On server, the vectors follow * using the layout described in exceptions-64s.S */ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 3e02710..5ecf54c 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -326,7 +326,7 @@ interrupt_base: NORMAL_EXCEPTION_PROLOG EXC_XFER_EE_LITE(0x0c00, DoSyscall) - /* Auxillary Processor Unavailable Interrupt */ + /* Auxiliary Processor Unavailable Interrupt */ EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) /* Decrementer Interrupt */ diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index c00d4ca..28581f1 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -527,7 +527,7 @@ static int ibmebus_bus_pm_resume_noirq(struct device *dev) #endif /* !CONFIG_SUSPEND */ -#ifdef CONFIG_HIBERNATION +#ifdef CONFIG_HIBERNATE_CALLBACKS static int ibmebus_bus_pm_freeze(struct device *dev) { @@ -665,7 +665,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev) return ret; } -#else /* !CONFIG_HIBERNATION */ +#else /* !CONFIG_HIBERNATE_CALLBACKS */ #define ibmebus_bus_pm_freeze NULL #define ibmebus_bus_pm_thaw NULL @@ -676,7 +676,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev) #define ibmebus_bus_pm_poweroff_noirq NULL #define ibmebus_bus_pm_restore_noirq NULL -#endif /* !CONFIG_HIBERNATION */ +#endif /* !CONFIG_HIBERNATE_CALLBACKS */ static struct dev_pm_ops ibmebus_bus_dev_pm_ops = { .prepare = ibmebus_bus_pm_prepare, diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S index 2a2f3c3..97ec855 100644 --- a/arch/powerpc/kernel/l2cr_6xx.S +++ b/arch/powerpc/kernel/l2cr_6xx.S @@ -151,7 +151,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) /**** Might be a good idea to set L2DO here - to prevent instructions from getting into the cache. But since we invalidate the next time we enable the cache it doesn't really matter. - Don't do this unless you accomodate all processor variations. + Don't do this unless you accommodate all processor variations. The bit moved on the 7450..... ****/ diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index c834757..2b97b80 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -330,9 +330,11 @@ void __init find_legacy_serial_ports(void) if (!parent) continue; if (of_match_node(legacy_serial_parents, parent) != NULL) { - index = add_legacy_soc_port(np, np); - if (index >= 0 && np == stdout) - legacy_serial_console = index; + if (of_device_is_available(np)) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } } of_node_put(parent); } diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1646836..301db65 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -262,7 +262,7 @@ static void parse_ppp_data(struct seq_file *m) seq_printf(m, "system_active_processors=%d\n", ppp_data.active_system_procs); - /* pool related entries are apropriate for shared configs */ + /* pool related entries are appropriate for shared configs */ if (lppaca_of(0).shared_proc) { unsigned long pool_idle_time, pool_procs; diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 97e0ae4..822f630 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -398,6 +398,25 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[], return 0; } +static u64 check_and_compute_delta(u64 prev, u64 val) +{ + u64 delta = (val - prev) & 0xfffffffful; + + /* + * POWER7 can roll back counter values, if the new value is smaller + * than the previous value it will cause the delta and the counter to + * have bogus values unless we rolled a counter over. If a coutner is + * rolled back, it will be smaller, but within 256, which is the maximum + * number of events to rollback at once. If we dectect a rollback + * return 0. This can lead to a small lack of precision in the + * counters. + */ + if (prev > val && (prev - val) < 256) + delta = 0; + + return delta; +} + static void power_pmu_read(struct perf_event *event) { s64 val, delta, prev; @@ -416,10 +435,11 @@ static void power_pmu_read(struct perf_event *event) prev = local64_read(&event->hw.prev_count); barrier(); val = read_pmc(event->hw.idx); + delta = check_and_compute_delta(prev, val); + if (!delta) + return; } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); - /* The counters are only 32 bits wide */ - delta = (val - prev) & 0xfffffffful; local64_add(delta, &event->count); local64_sub(delta, &event->hw.period_left); } @@ -449,8 +469,9 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw, val = (event->hw.idx == 5) ? pmc5 : pmc6; prev = local64_read(&event->hw.prev_count); event->hw.idx = 0; - delta = (val - prev) & 0xfffffffful; - local64_add(delta, &event->count); + delta = check_and_compute_delta(prev, val); + if (delta) + local64_add(delta, &event->count); } } @@ -458,14 +479,16 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw, unsigned long pmc5, unsigned long pmc6) { struct perf_event *event; - u64 val; + u64 val, prev; int i; for (i = 0; i < cpuhw->n_limited; ++i) { event = cpuhw->limited_counter[i]; event->hw.idx = cpuhw->limited_hwidx[i]; val = (event->hw.idx == 5) ? pmc5 : pmc6; - local64_set(&event->hw.prev_count, val); + prev = local64_read(&event->hw.prev_count); + if (check_and_compute_delta(prev, val)) + local64_set(&event->hw.prev_count, val); perf_event_update_userpage(event); } } @@ -759,7 +782,7 @@ static int power_pmu_add(struct perf_event *event, int ef_flags) /* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time(->commit_txn) as a whole */ if (cpuhw->group_flag & PERF_EVENT_TXN) @@ -1197,7 +1220,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, /* we don't have to worry about interrupts here */ prev = local64_read(&event->hw.prev_count); - delta = (val - prev) & 0xfffffffful; + delta = check_and_compute_delta(prev, val); local64_add(delta, &event->count); /* diff --git a/arch/powerpc/kernel/ppc_save_regs.S b/arch/powerpc/kernel/ppc_save_regs.S index e83ba3f..1b1787d 100644 --- a/arch/powerpc/kernel/ppc_save_regs.S +++ b/arch/powerpc/kernel/ppc_save_regs.S @@ -15,7 +15,7 @@ /* * Grab the register values as they are now. - * This won't do a particularily good job because we really + * This won't do a particularly good job because we really * want our caller's caller's registers, and our caller has * already executed its prologue. * ToDo: We could reach back into the caller's save area to do diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 05b7139..e74fa12 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -683,7 +683,7 @@ void __init early_init_devtree(void *params) #endif #ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occured during last boot */ + /* scan tree to see if dump occurred during last boot */ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); #endif @@ -739,7 +739,7 @@ void __init early_init_devtree(void *params) DBG("Scanning CPUs ...\n"); - /* Retreive CPU related informations from the flat tree + /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ of_scan_flat_dt(early_init_dt_scan_cpus, NULL); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 895b082..a6ae1cf 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -463,7 +463,7 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset, #ifdef CONFIG_VSX /* * Currently to set and and get all the vsx state, you need to call - * the fp and VMX calls aswell. This only get/sets the lower 32 + * the fp and VMX calls as well. This only get/sets the lower 32 * 128bit VSX registers. */ @@ -933,12 +933,16 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (data && !(data & DABR_TRANSLATION)) return -EIO; #ifdef CONFIG_HAVE_HW_BREAKPOINT + if (ptrace_get_breakpoints(task) < 0) + return -ESRCH; + bp = thread->ptrace_bps[0]; if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) { if (bp) { unregister_hw_breakpoint(bp); thread->ptrace_bps[0] = NULL; } + ptrace_put_breakpoints(task); return 0; } if (bp) { @@ -948,9 +952,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, (DABR_DATA_WRITE | DABR_DATA_READ), &attr.bp_type); ret = modify_user_hw_breakpoint(bp, &attr); - if (ret) + if (ret) { + ptrace_put_breakpoints(task); return ret; + } thread->ptrace_bps[0] = bp; + ptrace_put_breakpoints(task); thread->dabr = data; return 0; } @@ -965,9 +972,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, ptrace_triggered, task); if (IS_ERR(bp)) { thread->ptrace_bps[0] = NULL; + ptrace_put_breakpoints(task); return PTR_ERR(bp); } + ptrace_put_breakpoints(task); + #endif /* CONFIG_HAVE_HW_BREAKPOINT */ /* Move contents to the DABR register */ diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c index 7980ec0..67f6c3b 100644 --- a/arch/powerpc/kernel/rtasd.c +++ b/arch/powerpc/kernel/rtasd.c @@ -465,7 +465,7 @@ static void start_event_scan(void) pr_debug("rtasd: will sleep for %d milliseconds\n", (30000 / rtas_event_scan_rate)); - /* Retreive errors from nvram if any */ + /* Retrieve errors from nvram if any */ retreive_nvram_error_log(); schedule_delayed_work_on(cpumask_first(cpu_online_mask), diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index cbdbb14..9f9c204 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -116,7 +116,7 @@ void smp_message_recv(int msg) generic_smp_call_function_interrupt(); break; case PPC_MSG_RESCHEDULE: - /* we notice need_resched on exit */ + scheduler_ipi(); break; case PPC_MSG_CALL_FUNC_SINGLE: generic_smp_call_function_single_interrupt(); @@ -146,7 +146,7 @@ static irqreturn_t call_function_action(int irq, void *data) static irqreturn_t reschedule_action(int irq, void *data) { - /* we just need the return path side effect of checking need_resched */ + scheduler_ipi(); return IRQ_HANDLED; } diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index b0754e2..ba4dee3 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -143,7 +143,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) /* Disable MSR:DR to make sure we don't take a TLB or * hash miss during the copy, as our hash table will - * for a while be unuseable. For .text, we assume we are + * for a while be unusable. For .text, we assume we are * covered by a BAT. This works only for non-G5 at this * point. G5 will need a better approach, possibly using * a small temporary hash table filled with large mappings, diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 375480c..f33acfd 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -229,6 +229,9 @@ static u64 scan_dispatch_log(u64 stop_tb) u64 stolen = 0; u64 dtb; + if (!dtl) + return 0; + if (i == vpa->dtl_idx) return 0; while (i < vpa->dtl_idx) { diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bd74fac..5ddb801 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -959,7 +959,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) * ESR_DST (!?) or 0. In the process of chasing this with the * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ + * pattern to occurrences etc. -dgibson 31/Mar/2003 */ switch (do_mathemu(regs)) { case 0: emulate_single_step(regs); diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index b4b167b..baa33a7 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -1,5 +1,5 @@ /* - * udbg for NS16550 compatable serial ports + * udbg for NS16550 compatible serial ports * * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp * diff --git a/arch/powerpc/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S index 68d49dd..cf0c9c9 100644 --- a/arch/powerpc/kernel/vdso32/sigtramp.S +++ b/arch/powerpc/kernel/vdso32/sigtramp.S @@ -19,7 +19,7 @@ /* The nop here is a hack. The dwarf2 unwind routines subtract 1 from the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically + call instruction. Since we don't have a call here, we artificially extend the range covered by the unwind info by adding a nop before the real start. */ nop diff --git a/arch/powerpc/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S index 59eb59b..45ea281 100644 --- a/arch/powerpc/kernel/vdso64/sigtramp.S +++ b/arch/powerpc/kernel/vdso64/sigtramp.S @@ -20,7 +20,7 @@ /* The nop here is a hack. The dwarf2 unwind routines subtract 1 from the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically + call instruction. Since we don't have a call here, we artificially extend the range covered by the unwind info by padding before the real start. */ nop diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 3079f6b..5b7dd4e 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -192,8 +192,8 @@ htab_insert_pte: rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -215,8 +215,8 @@ _GLOBAL(htab_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -495,8 +495,8 @@ htab_special_pfn: rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -522,8 +522,8 @@ _GLOBAL(htab_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -813,8 +813,8 @@ ht64_insert_pte: rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_64K ld r9,STK_PARM(r9)(r1) /* segment size */ @@ -836,8 +836,8 @@ _GLOBAL(ht64_call_hpte_insert1) rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ - mr r4,r29 /* Retreive va */ + ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */ + mr r4,r29 /* Retrieve va */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_64K ld r9,STK_PARM(r9)(r1) /* segment size */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a5991fa..58a022d 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __cpuinit early_init_mmu_secondary(void) mtspr(SPRN_SDR1, _SDR1); /* Initialize STAB/SLB. We use a virtual address as it works - * in real mode on pSeries and we want a virutal address on + * in real mode on pSeries and we want a virtual address on * iSeries anyway */ if (cpu_has_feature(CPU_FTR_SLB)) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index a664996..57e545b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -424,7 +424,7 @@ void clear_user_page(void *page, unsigned long vaddr, struct page *pg) clear_page(page); /* - * We shouldnt have to do this, but some versions of glibc + * We shouldn't have to do this, but some versions of glibc * require it (ld.so assumes zero filled pages are icache clean) * - Anton */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 0dc95c0..5ec1dad 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -440,11 +440,11 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp) } /* - * Retreive and validate the ibm,dynamic-memory property of the device tree. + * Retrieve and validate the ibm,dynamic-memory property of the device tree. * * The layout of the ibm,dynamic-memory property is a number N of memblock * list entries followed by N memblock list entries. Each memblock list entry - * contains information as layed out in the of_drconf_cell struct above. + * contains information as laid out in the of_drconf_cell struct above. */ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) { @@ -468,7 +468,7 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) } /* - * Retreive and validate the ibm,lmb-size property for drconf memory + * Retrieve and validate the ibm,lmb-size property for drconf memory * from the device tree. */ static u64 of_get_lmb_size(struct device_node *memory) @@ -490,7 +490,7 @@ struct assoc_arrays { }; /* - * Retreive and validate the list of associativity arrays for drconf + * Retrieve and validate the list of associativity arrays for drconf * memory from the ibm,associativity-lookup-arrays property of the * device tree.. * @@ -604,7 +604,7 @@ static int __cpuinit cpu_numa_callback(struct notifier_block *nfb, * Returns the size the region should have to enforce the memory limit. * This will either be the original value of size, a truncated value, * or zero. If the returned value of size is 0 the region should be - * discarded as it lies wholy above the memory limit. + * discarded as it lies wholly above the memory limit. */ static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size) diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 2228151..af08922 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -192,7 +192,7 @@ normal_tlb_miss: or r10,r15,r14 BEGIN_MMU_FTR_SECTION - /* Set the TLB reservation and seach for existing entry. Then load + /* Set the TLB reservation and search for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,r16) @@ -425,7 +425,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) virt_page_table_tlb_miss_fault: /* If we fault here, things are a little bit tricky. We need to call - * either data or instruction store fault, and we need to retreive + * either data or instruction store fault, and we need to retrieve * the original fault address and ESR (for data). * * The thing is, we know that in normal circumstances, this is diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index c4d2b71..cb515cf 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -67,7 +67,7 @@ #define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */ -/* Minumum HW interval timer setting to send value to trace buffer is 10 cycle. +/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle. * To configure counter to send value every N cycles set counter to * 2^32 - 1 - N. */ @@ -1470,7 +1470,7 @@ static int cell_global_start(struct op_counter_config *ctr) * trace buffer at the maximum rate possible. The trace buffer is configured * to store the PCs, wrapping when it is full. The performance counter is * initialized to the max hardware count minus the number of events, N, between - * samples. Once the N events have occured, a HW counter overflow occurs + * samples. Once the N events have occurred, a HW counter overflow occurs * causing the generation of a HW counter interrupt which also stops the * writing of the SPU PC values to the trace buffer. Hence the last PC * written to the trace buffer is the SPU PC that we want. Unfortunately, @@ -1656,7 +1656,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs, * The counters were frozen by the interrupt. * Reenable the interrupt and restart the counters. * If there was a race between the interrupt handler and - * the virtual counter routine. The virutal counter + * the virtual counter routine. The virtual counter * routine may have cleared the interrupts. Hence must * use the virt_cntr_inter_mask to re-enable the interrupts. */ diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8077409..8ee51a2 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -207,7 +207,7 @@ static unsigned long get_pc(struct pt_regs *regs) unsigned long mmcra; unsigned long slot; - /* Cant do much about it */ + /* Can't do much about it */ if (!cur_cpu_spec->oprofile_mmcra_sihv) return pc; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index 6385d88..9940ce8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -57,7 +57,7 @@ struct mpc52xx_lpbfifo { static struct mpc52xx_lpbfifo lpbfifo; /** - * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered + * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transferred */ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) { @@ -179,7 +179,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * * On transmit, the dma completion irq triggers before the fifo completion * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm - * task completion irq becuase everyting is not really done until the LPB FIFO + * task completion irq because everything is not really done until the LPB FIFO * completion irq triggers. * * In other words: @@ -195,7 +195,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * Exit conditions: * 1) Transfer aborted * 2) FIFO complete without DMA; more data to do - * 3) FIFO complete without DMA; all data transfered + * 3) FIFO complete without DMA; all data transferred * 4) FIFO complete using DMA * * Condition 1 can occur regardless of whether or not DMA is used. diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 3ddea96..1dd1540 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -512,7 +512,7 @@ void __init mpc52xx_init_irq(void) /** * mpc52xx_get_irq - Get pending interrupt number hook function * - * Called by the interupt handler to determine what IRQ handler needs to be + * Called by the interrupt handler to determine what IRQ handler needs to be * executed. * * Status of pending interrupts is determined by reading the encoded status diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index 1882729..104faa8 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -318,17 +318,20 @@ static const struct platform_suspend_ops mpc83xx_suspend_ops = { .end = mpc83xx_suspend_end, }; +static struct of_device_id pmc_match[]; static int pmc_probe(struct platform_device *ofdev) { + const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct resource res; struct pmc_type *type; int ret = 0; - if (!ofdev->dev.of_match) + match = of_match_device(pmc_match, &ofdev->dev); + if (!match) return -EINVAL; - type = ofdev->dev.of_match->data; + type = match->data; if (!of_device_is_available(np)) return -ENODEV; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index acfacce..3675da7 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <linux/mutex.h> #include <linux/linux_logo.h> +#include <linux/syscore_ops.h> #include <asm/spu.h> #include <asm/spu_priv1.h> #include <asm/spu_csa.h> @@ -521,18 +522,8 @@ void spu_init_channels(struct spu *spu) } EXPORT_SYMBOL_GPL(spu_init_channels); -static int spu_shutdown(struct sys_device *sysdev) -{ - struct spu *spu = container_of(sysdev, struct spu, sysdev); - - spu_free_irqs(spu); - spu_destroy_spu(spu); - return 0; -} - static struct sysdev_class spu_sysdev_class = { .name = "spu", - .shutdown = spu_shutdown, }; int spu_add_sysdev_attr(struct sysdev_attribute *attr) @@ -797,6 +788,22 @@ static inline void crash_register_spus(struct list_head *list) } #endif +static void spu_shutdown(void) +{ + struct spu *spu; + + mutex_lock(&spu_full_list_mutex); + list_for_each_entry(spu, &spu_full_list, full_list) { + spu_free_irqs(spu); + spu_destroy_spu(spu); + } + mutex_unlock(&spu_full_list_mutex); +} + +static struct syscore_ops spu_syscore_ops = { + .shutdown = spu_shutdown, +}; + static int __init init_spu_base(void) { int i, ret = 0; @@ -830,6 +837,7 @@ static int __init init_spu_base(void) crash_register_spus(&spu_full_list); mutex_unlock(&spu_full_list_mutex); spu_add_sysdev_attr(&attr_stat); + register_syscore_ops(&spu_syscore_ops); spu_init_affinity(); diff --git a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c index 3b894f5..1470699 100644 --- a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c +++ b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c @@ -90,7 +90,7 @@ int spu_alloc_lscsa(struct spu_state *csa) */ for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++) { /* XXX This is likely to fail, we should use a special pool - * similiar to what hugetlbfs does. + * similar to what hugetlbfs does. */ csa->lscsa_pages[i] = alloc_pages(GFP_KERNEL, SPU_64K_PAGE_ORDER); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 0b04662..6520385 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -846,7 +846,7 @@ static struct spu_context *grab_runnable_context(int prio, int node) struct list_head *rq = &spu_prio->runq[best]; list_for_each_entry(ctx, rq, rq) { - /* XXX(hch): check for affinity here aswell */ + /* XXX(hch): check for affinity here as well */ if (__node_allowed(ctx, node)) { __spu_del_from_rq(ctx); goto found; diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c index 21a9c95..72c905f 100644 --- a/arch/powerpc/platforms/cell/spufs/spu_restore.c +++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c @@ -284,7 +284,7 @@ static inline void restore_complete(void) exit_instrs[3] = BR_INSTR; break; default: - /* SPU_Status[R]=1. No additonal instructions. */ + /* SPU_Status[R]=1. No additional instructions. */ break; } spu_sync(); diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index b5e026b..62dabe3 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -51,7 +51,7 @@ static int mf_initialized; /* - * This is the structure layout for the Machine Facilites LPAR event + * This is the structure layout for the Machine Facilities LPAR event * flows. */ struct vsp_cmd_data { diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index b5f05d9..2376069 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -396,7 +396,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mTargetInst)) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "int msg rcvd, source inst (%d) doesnt match (%d)\n", + "int msg rcvd, source inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mTargetInst, event->xSourceInstanceId); return; @@ -407,7 +407,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mSourceInst)) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "int msg rcvd, target inst (%d) doesnt match (%d)\n", + "int msg rcvd, target inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mSourceInst, event->xTargetInstanceId); return; @@ -418,7 +418,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mSourceInst) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "ack msg rcvd, source inst (%d) doesnt match (%d)\n", + "ack msg rcvd, source inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mSourceInst, event->xSourceInstanceId); return; @@ -428,7 +428,7 @@ static void vio_handleEvent(struct HvLpEvent *event) viopathStatus[remoteLp].mTargetInst) { printk(VIOPATH_KERN_WARN "message from invalid partition. " - "viopath: ack msg rcvd, target inst (%d) doesnt match (%d)\n", + "viopath: ack msg rcvd, target inst (%d) doesn't match (%d)\n", viopathStatus[remoteLp].mTargetInst, event->xTargetInstanceId); return; diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index 09695ae..321a9b3 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -379,9 +379,9 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, } EXPORT_SYMBOL(pasemi_dma_free_buf); -/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization +/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel synchronization * - * Allocates a flag for use with channel syncronization (event descriptors). + * Allocates a flag for use with channel synchronization (event descriptors). * Returns allocated flag (0-63), < 0 on error. */ int pasemi_dma_alloc_flag(void) diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 50f1693..ea47df6 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -11,7 +11,7 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o -# CONFIG_NVRAM is an arch. independant tristate symbol, for pmac32 we really +# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y obj-$(CONFIG_NVRAM:m=y) += nvram.o diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 480567e..e9c8a60 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -904,7 +904,7 @@ static void __init smu_i2c_probe(void) printk(KERN_INFO "SMU i2c %s\n", controller->full_name); /* Look for childs, note that they might not be of the right - * type as older device trees mix i2c busses and other thigns + * type as older device trees mix i2c busses and other things * at the same level */ for (busnode = NULL; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index ab68989..f33e08d 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -299,7 +299,7 @@ static void __init setup_chaos(struct pci_controller *hose, * This function deals with some "special cases" devices. * * 0 -> No special case - * 1 -> Skip the device but act as if the access was successfull + * 1 -> Skip the device but act as if the access was successful * (return 0xff's on reads, eventually, cache config space * accesses in a later version) * -1 -> Hide the device (unsuccessful access) diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 023f240..7c18a16 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -21,7 +21,7 @@ #include <linux/signal.h> #include <linux/pci.h> #include <linux/interrupt.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/module.h> @@ -677,7 +677,7 @@ not_found: return viaint; } -static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) +static int pmacpic_suspend(void) { int viaint = pmacpic_find_viaint(); @@ -698,7 +698,7 @@ static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) return 0; } -static int pmacpic_resume(struct sys_device *sysdev) +static void pmacpic_resume(void) { int i; @@ -709,39 +709,19 @@ static int pmacpic_resume(struct sys_device *sysdev) for (i = 0; i < max_real_irqs; ++i) if (test_bit(i, sleep_save_mask)) pmac_unmask_irq(irq_get_irq_data(i)); - - return 0; } -#endif /* CONFIG_PM && CONFIG_PPC32 */ - -static struct sysdev_class pmacpic_sysclass = { - .name = "pmac_pic", +static struct syscore_ops pmacpic_syscore_ops = { + .suspend = pmacpic_suspend, + .resume = pmacpic_resume, }; -static struct sys_device device_pmacpic = { - .id = 0, - .cls = &pmacpic_sysclass, -}; - -static struct sysdev_driver driver_pmacpic = { -#if defined(CONFIG_PM) && defined(CONFIG_PPC32) - .suspend = &pmacpic_suspend, - .resume = &pmacpic_resume, -#endif /* CONFIG_PM && CONFIG_PPC32 */ -}; - -static int __init init_pmacpic_sysfs(void) +static int __init init_pmacpic_syscore(void) { -#ifdef CONFIG_PPC32 - if (max_irqs == 0) - return -ENODEV; -#endif - printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); - sysdev_class_register(&pmacpic_sysclass); - sysdev_register(&device_pmacpic); - sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); + register_syscore_ops(&pmacpic_syscore_ops); return 0; } -machine_subsys_initcall(powermac, init_pmacpic_sysfs); +machine_subsys_initcall(powermac, init_pmacpic_syscore); + +#endif /* CONFIG_PM && CONFIG_PPC32 */ diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index a830c5e..bc5f0dc 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -842,6 +842,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); } +#ifdef CONFIG_PPC64 #ifdef CONFIG_HOTPLUG_CPU static int smp_core99_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) @@ -879,7 +880,6 @@ static struct notifier_block __cpuinitdata smp_core99_cpu_nb = { static void __init smp_core99_bringup_done(void) { -#ifdef CONFIG_PPC64 extern void g5_phy_disable_cpu1(void); /* Close i2c bus if it was used for tb sync */ @@ -894,14 +894,14 @@ static void __init smp_core99_bringup_done(void) set_cpu_present(1, false); g5_phy_disable_cpu1(); } -#endif /* CONFIG_PPC64 */ - #ifdef CONFIG_HOTPLUG_CPU register_cpu_notifier(&smp_core99_cpu_nb); #endif + if (ppc_md.progress) ppc_md.progress("smp_core99_bringup_done", 0x349); } +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_HOTPLUG_CPU @@ -975,7 +975,9 @@ static void pmac_cpu_die(void) struct smp_ops_t core99_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_core99_probe, +#ifdef CONFIG_PPC64 .bringup_done = smp_core99_bringup_done, +#endif .kick_cpu = smp_core99_kick_cpu, .setup_cpu = smp_core99_setup_cpu, .give_timebase = smp_core99_give_timebase, diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index b74a923..57ceb92 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -74,7 +74,7 @@ static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa) return NULL; /* The configure connector reported name does not contain a - * preceeding '/', so we allocate a buffer large enough to + * preceding '/', so we allocate a buffer large enough to * prepend this to the full_name. */ name = (char *)ccwa + ccwa->name_offset; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 3cc4d10..8964917 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -65,7 +65,7 @@ * with EEH. * * Ideally, a PCI device driver, when suspecting that an isolation - * event has occured (e.g. by reading 0xff's), will then ask EEH + * event has occurred (e.g. by reading 0xff's), will then ask EEH * whether this is the case, and then take appropriate steps to * reset the PCI slot, the PCI device, and then resume operations. * However, until that day, the checking is done here, with the diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index fd50ccd..ef8c454 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -216,7 +216,7 @@ static void pseries_cpu_die(unsigned int cpu) cpu, pcpu, cpu_status); } - /* Isolation and deallocation are definatly done by + /* Isolation and deallocation are definitely done by * drslot_chrp_cpu. If they were not they would be * done here. Change isolate state to Isolate and * change allocation-state to Unusable. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 154c464..6d5412a 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -272,7 +272,7 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) return tce_ret; } -/* this is compatable with cells for the device tree property */ +/* this is compatible with cells for the device tree property */ struct dynamic_dma_window_prop { __be32 liobn; /* tce table number */ __be64 dma_base; /* address hi,lo */ @@ -976,7 +976,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); /* dev setup for LPAR is a little tricky, since the device tree might - * contain the dma-window properties per-device and not neccesarily + * contain the dma-window properties per-device and not necessarily * for the bus. So we need to search upwards in the tree until we * either hit a dma-window property, OR find a parent with a table * already allocated. @@ -1033,7 +1033,7 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask) /* * the device tree might contain the dma-window properties - * per-device and not neccesarily for the bus. So we need to + * per-device and not necessarily for the bus. So we need to * search upwards in the tree until we either hit a dma-window * property, OR find a parent with a table already allocated. */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 0007241..6c42cfd 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -287,14 +287,22 @@ static int alloc_dispatch_logs(void) int cpu, ret; struct paca_struct *pp; struct dtl_entry *dtl; + struct kmem_cache *dtl_cache; if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return 0; + dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, + DISPATCH_LOG_BYTES, 0, NULL); + if (!dtl_cache) { + pr_warn("Failed to create dispatch trace log buffer cache\n"); + pr_warn("Stolen time statistics will be unreliable\n"); + return 0; + } + for_each_possible_cpu(cpu) { pp = &paca[cpu]; - dtl = kmalloc_node(DISPATCH_LOG_BYTES, GFP_KERNEL, - cpu_to_node(cpu)); + dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL); if (!dtl) { pr_warn("Failed to allocate dispatch trace log for cpu %d\n", cpu); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index ec8fe22..d690133 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -897,7 +897,7 @@ void xics_migrate_irqs_away(void) int status; unsigned long flags; - /* We cant set affinity on ISA interrupts */ + /* We can't set affinity on ISA interrupts */ if (virq < NUM_ISA_INTERRUPTS) continue; if (irq_map[virq].host != xics_host) diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 27402c7d..1636dd8 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -95,7 +95,7 @@ axon_ram_irq_handler(int irq, void *dev) BUG_ON(!bank); - dev_err(&device->dev, "Correctable memory error occured\n"); + dev_err(&device->dev, "Correctable memory error occurred\n"); bank->ecc_counter++; return IRQ_HANDLED; } diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h index 23a95f8..a0e2e6b 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.h +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h @@ -20,7 +20,7 @@ * struct bcom_bd - Structure describing a generic BestComm buffer descriptor * @status: The current status of this buffer. Exact meaning depends on the * task type - * @data: An array of u32 extra data. Size of array is task dependant. + * @data: An array of u32 extra data. Size of array is task dependent. * * Note: Don't dereference a bcom_bd pointer as an array. The size of the * bcom_bd is variable. Use bcom_get_bd() instead. diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h index eb0d1c8..3b52f3f 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h +++ b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h @@ -97,7 +97,7 @@ struct bcom_task_header { u8 reserved[8]; }; -/* Descriptors stucture & co */ +/* Descriptors structure & co */ #define BCOM_DESC_NOP 0x000001f8 #define BCOM_LCD_MASK 0x80000000 #define BCOM_DRD_EXTENDED 0x40000000 diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 8b5aba2..e0bc944 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -223,7 +223,7 @@ void __init cpm_reset(void) /* Set SDMA Bus Request priority 5. * On 860T, this also enables FEC priority 6. I am not sure - * this is what we realy want for some applications, but the + * this is what we really want for some applications, but the * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index d5679dc..01cd2f0 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -304,8 +304,10 @@ static int __devinit fsl_msi_setup_hwirq(struct fsl_msi *msi, return 0; } +static const struct of_device_id fsl_of_msi_ids[]; static int __devinit fsl_of_msi_probe(struct platform_device *dev) { + const struct of_device_id *match; struct fsl_msi *msi; struct resource res; int err, i, j, irq_index, count; @@ -316,9 +318,10 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) u32 offset; static const u32 all_avail[] = { 0, NR_MSI_IRQS }; - if (!dev->dev.of_match) + match = of_match_device(fsl_of_msi_ids, &dev->dev); + if (!match) return -EINVAL; - features = dev->dev.of_match->data; + features = match->data; printk(KERN_DEBUG "Setting up Freescale MSI support\n"); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index f8f7f28..68ca929 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -324,6 +324,11 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) struct resource rsrc; const int *bus_range; + if (!of_device_is_available(dev)) { + pr_warning("%s: disabled\n", dev->full_name); + return -ENODEV; + } + pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 14232d5..4979853 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1457,7 +1457,6 @@ int fsl_rio_setup(struct platform_device *dev) port->ops = ops; port->priv = priv; port->phys_efptr = 0x100; - rio_register_mport(port); priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); rio_regs_win = priv->regs_win; @@ -1504,6 +1503,9 @@ int fsl_rio_setup(struct platform_device *dev) dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", port->sys_size ? 65536 : 256); + if (rio_register_mport(port)) + goto err; + if (port->host_deviceid >= 0) out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index 7ed8096..82fdad8 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -117,7 +117,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | (devfn << 8) | reg | cfg_type)); - /* surpress setting of PCI_PRIMARY_BUS */ + /* suppress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) if ((offset == PCI_PRIMARY_BUS) && (bus->number == hose->first_busno)) diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index fa438be..596554a 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -18,7 +18,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/device.h> #include <linux/bootmem.h> #include <linux/spinlock.h> @@ -902,7 +902,7 @@ static struct { u32 sercr; } ipic_saved_state; -static int ipic_suspend(struct sys_device *sdev, pm_message_t state) +static int ipic_suspend(void) { struct ipic *ipic = primary_ipic; @@ -933,7 +933,7 @@ static int ipic_suspend(struct sys_device *sdev, pm_message_t state) return 0; } -static int ipic_resume(struct sys_device *sdev) +static void ipic_resume(void) { struct ipic *ipic = primary_ipic; @@ -949,44 +949,26 @@ static int ipic_resume(struct sys_device *sdev) ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr); ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr); ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr); - - return 0; } #else #define ipic_suspend NULL #define ipic_resume NULL #endif -static struct sysdev_class ipic_sysclass = { - .name = "ipic", +static struct syscore_ops ipic_syscore_ops = { .suspend = ipic_suspend, .resume = ipic_resume, }; -static struct sys_device device_ipic = { - .id = 0, - .cls = &ipic_sysclass, -}; - -static int __init init_ipic_sysfs(void) +static int __init init_ipic_syscore(void) { - int rc; - if (!primary_ipic || !primary_ipic->regs) return -ENODEV; - printk(KERN_DEBUG "Registering ipic with sysfs...\n"); - rc = sysdev_class_register(&ipic_sysclass); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys class\n"); - return -ENODEV; - } - rc = sysdev_register(&device_ipic); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys device\n"); - return -ENODEV; - } + printk(KERN_DEBUG "Registering ipic system core operations\n"); + register_syscore_ops(&ipic_syscore_ops); + return 0; } -subsys_initcall(init_ipic_sysfs); +subsys_initcall(init_ipic_syscore); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index f91c065..7e5dc8f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -27,6 +27,7 @@ #include <linux/spinlock.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/syscore_ops.h> #include <asm/ptrace.h> #include <asm/signal.h> @@ -1702,9 +1703,8 @@ void mpic_reset_core(int cpu) #endif /* CONFIG_SMP */ #ifdef CONFIG_PM -static int mpic_suspend(struct sys_device *dev, pm_message_t state) +static void mpic_suspend_one(struct mpic *mpic) { - struct mpic *mpic = container_of(dev, struct mpic, sysdev); int i; for (i = 0; i < mpic->num_sources; i++) { @@ -1713,13 +1713,22 @@ static int mpic_suspend(struct sys_device *dev, pm_message_t state) mpic->save_data[i].dest = mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)); } +} + +static int mpic_suspend(void) +{ + struct mpic *mpic = mpics; + + while (mpic) { + mpic_suspend_one(mpic); + mpic = mpic->next; + } return 0; } -static int mpic_resume(struct sys_device *dev) +static void mpic_resume_one(struct mpic *mpic) { - struct mpic *mpic = container_of(dev, struct mpic, sysdev); int i; for (i = 0; i < mpic->num_sources; i++) { @@ -1746,33 +1755,28 @@ static int mpic_resume(struct sys_device *dev) } #endif } /* end for loop */ +} - return 0; +static void mpic_resume(void) +{ + struct mpic *mpic = mpics; + + while (mpic) { + mpic_resume_one(mpic); + mpic = mpic->next; + } } -#endif -static struct sysdev_class mpic_sysclass = { -#ifdef CONFIG_PM +static struct syscore_ops mpic_syscore_ops = { .resume = mpic_resume, .suspend = mpic_suspend, -#endif - .name = "mpic", }; static int mpic_init_sys(void) { - struct mpic *mpic = mpics; - int error, id = 0; - - error = sysdev_class_register(&mpic_sysclass); - - while (mpic && !error) { - mpic->sysdev.cls = &mpic_sysclass; - mpic->sysdev.id = id++; - error = sysdev_register(&mpic->sysdev); - mpic = mpic->next; - } - return error; + register_syscore_ops(&mpic_syscore_ops); + return 0; } device_initcall(mpic_init_sys); +#endif diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 56d9e5d..c39a134 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -324,7 +324,7 @@ #define PESDR0_460EX_IHS2 0x036D /* - * 460SX addtional DCRs + * 460SX additional DCRs */ #define PESDRn_460SX_RCEI 0x02 diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2508a6f..4a7f140 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -88,6 +88,7 @@ config S390 select HAVE_KERNEL_XZ select HAVE_GET_USER_PAGES_FAST select HAVE_ARCH_MUTEX_CPU_RELAX + select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 975e3ab..8b16c47 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -76,7 +76,7 @@ static void prng_seed(int nbytes) /* Add the entropy */ while (nbytes >= 8) { - *((__u64 *)parm_block) ^= *((__u64 *)buf+i*8); + *((__u64 *)parm_block) ^= *((__u64 *)(buf+i)); prng_add_entropy(); i += 8; nbytes -= 8; diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 5c5ba10..d9db138 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -9,7 +9,7 @@ * * Atomic operations that C can't guarantee us. * Useful for resource counting etc. - * s390 uses 'Compare And Swap' for atomicity in SMP enviroment. + * s390 uses 'Compare And Swap' for atomicity in SMP environment. * */ diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 43a5c78..3e20383 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -11,5 +11,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable); int set_memory_ro(unsigned long addr, int numpages); int set_memory_rw(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +int set_memory_x(unsigned long addr, int numpages); #endif /* _S390_CACHEFLUSH_H */ diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index e34347d..fc50a33 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -183,7 +183,7 @@ struct esw3 { * The irb that is handed to the device driver when an interrupt occurs. For * solicited interrupts, the common I/O layer already performs checks whether * a field is valid; a field not being valid is always passed as %0. - * If a unit check occured, @ecw may contain sense data; this is retrieved + * If a unit check occurred, @ecw may contain sense data; this is retrieved * by the common I/O layer itself if the device doesn't support concurrent * sense (so that the device driver never needs to perform basic sene itself). * For unsolicited interrupts, the irb is passed as-is (expect for sense data, diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h index 72b2e2f..7e91c58 100644 --- a/arch/s390/include/asm/diag.h +++ b/arch/s390/include/asm/diag.h @@ -9,9 +9,22 @@ #define _ASM_S390_DIAG_H /* - * Diagnose 10: Release pages + * Diagnose 10: Release page range */ -extern void diag10(unsigned long addr); +static inline void diag10_range(unsigned long start_pfn, unsigned long num_pfn) +{ + unsigned long start_addr, end_addr; + + start_addr = start_pfn << PAGE_SHIFT; + end_addr = (start_pfn + num_pfn - 1) << PAGE_SHIFT; + + asm volatile( + "0: diag %0,%1,0x10\n" + "1:\n" + EX_TABLE(0b, 1b) + EX_TABLE(1b, 1b) + : : "a" (start_addr), "a" (end_addr)); +} /* * Diagnose 14: Input spool file manipulation diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h index 3c29be4..b7931fa 100644 --- a/arch/s390/include/asm/ftrace.h +++ b/arch/s390/include/asm/ftrace.h @@ -11,15 +11,13 @@ struct dyn_arch_ftrace { }; #ifdef CONFIG_64BIT #define MCOUNT_INSN_SIZE 12 -#define MCOUNT_OFFSET 8 #else #define MCOUNT_INSN_SIZE 20 -#define MCOUNT_OFFSET 4 #endif static inline unsigned long ftrace_call_adjust(unsigned long addr) { - return addr - MCOUNT_OFFSET; + return addr; } #endif /* __ASSEMBLY__ */ diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h new file mode 100644 index 0000000..95a6cf2 --- /dev/null +++ b/arch/s390/include/asm/jump_label.h @@ -0,0 +1,37 @@ +#ifndef _ASM_S390_JUMP_LABEL_H +#define _ASM_S390_JUMP_LABEL_H + +#include <linux/types.h> + +#define JUMP_LABEL_NOP_SIZE 6 + +#ifdef CONFIG_64BIT +#define ASM_PTR ".quad" +#define ASM_ALIGN ".balign 8" +#else +#define ASM_PTR ".long" +#define ASM_ALIGN ".balign 4" +#endif + +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("0: brcl 0,0\n" + ".pushsection __jump_table, \"aw\"\n" + ASM_ALIGN "\n" + ASM_PTR " 0b, %l[label], %0\n" + ".popsection\n" + : : "X" (key) : : label); + return false; +label: + return true; +} + +typedef unsigned long jump_label_t; + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#endif diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index a6f0e7c..8c277ca 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -23,7 +23,7 @@ static inline int init_new_context(struct task_struct *tsk, #ifdef CONFIG_64BIT mm->context.asce_bits |= _ASCE_TYPE_REGION3; #endif - if (current->mm->context.alloc_pgste) { + if (current->mm && current->mm->context.alloc_pgste) { /* * alloc_pgste indicates, that any NEW context will be created * with extended page tables. The old context is unchanged. The diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 64230bc..5ff15da 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -23,7 +23,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \ processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \ - vdso.o vtime.o sysinfo.o nmi.o sclp.o + vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c index c032d11..8237fc0 100644 --- a/arch/s390/kernel/diag.c +++ b/arch/s390/kernel/diag.c @@ -9,27 +9,6 @@ #include <asm/diag.h> /* - * Diagnose 10: Release pages - */ -void diag10(unsigned long addr) -{ - if (addr >= 0x7ff00000) - return; - asm volatile( -#ifdef CONFIG_64BIT - " sam31\n" - " diag %0,%0,0x10\n" - "0: sam64\n" -#else - " diag %0,%0,0x10\n" - "0:\n" -#endif - EX_TABLE(0b, 0b) - : : "a" (addr)); -} -EXPORT_SYMBOL(diag10); - -/* * Diagnose 14: Input spool file manipulation */ int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index c83726c..3d4a78f 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -672,6 +672,7 @@ static struct insn opcode_b2[] = { { "rp", 0x77, INSTR_S_RD }, { "stcke", 0x78, INSTR_S_RD }, { "sacf", 0x79, INSTR_S_RD }, + { "spp", 0x80, INSTR_S_RD }, { "stsi", 0x7d, INSTR_S_RD }, { "srnm", 0x99, INSTR_S_RD }, { "stfpc", 0x9c, INSTR_S_RD }, diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 648f642..1b67fc6 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -836,7 +836,7 @@ restart_base: stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on basr %r14,0 l %r14,restart_addr-.(%r14) - br %r14 # branch to start_secondary + basr %r14,%r14 # branch to start_secondary restart_addr: .long start_secondary .align 8 diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9d3603d..9fd8645 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -841,7 +841,7 @@ restart_base: mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on - jg start_secondary + brasl %r14,start_secondary .align 8 restart_vtime: .long 0x7fffffff,0xffffffff diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 7061398..fb317bf 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -460,7 +460,7 @@ startup: #ifndef CONFIG_MARCH_G5 # check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10} xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST - stfl __LC_STFL_FAC_LIST # store facility list + .insn s,0xb2b10000,__LC_STFL_FAC_LIST # store facility list tm __LC_STFL_FAC_LIST,0x01 # stfle available ? jz 0f la %r0,0 diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c new file mode 100644 index 0000000..44cc06b --- /dev/null +++ b/arch/s390/kernel/jump_label.c @@ -0,0 +1,59 @@ +/* + * Jump label s390 support + * + * Copyright IBM Corp. 2011 + * Author(s): Jan Glauber <jang@linux.vnet.ibm.com> + */ +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/stop_machine.h> +#include <linux/jump_label.h> +#include <asm/ipl.h> + +#ifdef HAVE_JUMP_LABEL + +struct insn { + u16 opcode; + s32 offset; +} __packed; + +struct insn_args { + unsigned long *target; + struct insn *insn; + ssize_t size; +}; + +static int __arch_jump_label_transform(void *data) +{ + struct insn_args *args = data; + int rc; + + rc = probe_kernel_write(args->target, args->insn, args->size); + WARN_ON_ONCE(rc < 0); + return 0; +} + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + struct insn_args args; + struct insn insn; + + if (type == JUMP_LABEL_ENABLE) { + /* brcl 15,offset */ + insn.opcode = 0xc0f4; + insn.offset = (entry->target - entry->code) >> 1; + } else { + /* brcl 0,0 */ + insn.opcode = 0xc004; + insn.offset = 0; + } + + args.target = (void *) entry->code; + args.insn = &insn; + args.size = JUMP_LABEL_NOP_SIZE; + + stop_machine(__arch_jump_label_transform, &args, NULL); +} + +#endif diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 5e73dee..9eabbc9 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -78,7 +78,7 @@ do_reipl_asm: basr %r13,0 * in the ESA psw. * Bit 31 of the addresses has to be 0 for the * 31bit lpswe instruction a fact they appear to have - * ommited from the pop. + * omitted from the pop. */ .Lnewpsw: .quad 0x0000000080000000 .quad .Lpg1 diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index ed183c2..f5434d1 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -708,7 +708,7 @@ static void __init setup_hwcaps(void) * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information * as stored by stfl, bits 32-xxx contain additional facilities. * How many facility words are stored depends on the number of - * doublewords passed to the instruction. The additional facilites + * doublewords passed to the instruction. The additional facilities * are: * Bit 42: decimal floating point facility is installed * Bit 44: perform floating point operation facility is installed diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 63a97db..63c7d9f 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -165,12 +165,12 @@ static void do_ext_call_interrupt(unsigned int ext_int_code, kstat_cpu(smp_processor_id()).irqs[EXTINT_IPI]++; /* * handle bit signal external calls - * - * For the ec_schedule signal we have to do nothing. All the work - * is done automatically when we return from the interrupt. */ bits = xchg(&S390_lowcore.ext_call_fast, 0); + if (test_bit(ec_schedule, &bits)) + scheduler_ipi(); + if (test_bit(ec_call_function, &bits)) generic_smp_call_function_interrupt(); diff --git a/arch/s390/kernel/switch_cpu.S b/arch/s390/kernel/switch_cpu.S index 469f11b..20530dd 100644 --- a/arch/s390/kernel/switch_cpu.S +++ b/arch/s390/kernel/switch_cpu.S @@ -46,7 +46,9 @@ smp_restart_cpu: ltr %r4,%r4 /* New stack ? */ jz 1f lr %r15,%r4 -1: basr %r14,%r2 +1: lr %r14,%r2 /* r14: Function to call */ + lr %r2,%r3 /* r2 : Parameter for function*/ + basr %r14,%r14 /* Call function */ .gprregs_addr: .long .gprregs diff --git a/arch/s390/kernel/switch_cpu64.S b/arch/s390/kernel/switch_cpu64.S index d94aacc..5be3f43 100644 --- a/arch/s390/kernel/switch_cpu64.S +++ b/arch/s390/kernel/switch_cpu64.S @@ -42,7 +42,9 @@ smp_restart_cpu: ltgr %r4,%r4 /* New stack ? */ jz 1f lgr %r15,%r4 -1: basr %r14,%r2 +1: lgr %r14,%r2 /* r14: Function to call */ + lgr %r2,%r3 /* r2 : Parameter for function*/ + basr %r14,%r14 /* Call function */ .section .data,"aw",@progbits .gprregs: diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9e7b039..87be655 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -724,7 +724,7 @@ static void clock_sync_cpu(struct clock_sync_data *sync) } /* - * Sync the TOD clock using the port refered to by aibp. This port + * Sync the TOD clock using the port referred to by aibp. This port * has to be enabled and the other port has to be disabled. The * last eacr update has to be more than 1.6 seconds in the past. */ @@ -1012,7 +1012,7 @@ static void etr_work_fn(struct work_struct *work) eacr = etr_handle_update(&aib, eacr); /* - * Select ports to enable. The prefered synchronization mode is PPS. + * Select ports to enable. The preferred synchronization mode is PPS. * If a port can be enabled depends on a number of things: * 1) The port needs to be online and uptodate. A port is not * disabled just because it is not uptodate, but it is only @@ -1091,7 +1091,7 @@ static void etr_work_fn(struct work_struct *work) /* * Update eacr and try to synchronize the clock. If the update * of eacr caused a stepping port switch (or if we have to - * assume that a stepping port switch has occured) or the + * assume that a stepping port switch has occurred) or the * clock syncing failed, reset the sync check control bit * and set up a timer to try again after 0.5 seconds */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 1ccdf4d..5e8ead4 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -44,7 +44,7 @@ static inline void set_vtimer(__u64 expires) __u64 timer; asm volatile (" STPT %0\n" /* Store current cpu timer value */ - " SPT %1" /* Set new value immediatly afterwards */ + " SPT %1" /* Set new value immediately afterwards */ : "=m" (timer) : "m" (expires) ); S390_lowcore.system_timer += S390_lowcore.last_update_timer - timer; S390_lowcore.last_update_timer = expires; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index bade533..30ca85c 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -721,7 +721,7 @@ static int __init kvm_s390_init(void) /* * guests can ask for up to 255+1 double words, we need a full page - * to hold the maximum amount of facilites. On the other hand, we + * to hold the maximum amount of facilities. On the other hand, we * only set facilities that are known to work in KVM. */ facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA); diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 9194a4b..73c47bd 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -311,7 +311,7 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu) /* * a lot of B2 instructions are priviledged. We first check for - * the priviledges ones, that we can handle in the kernel. If the + * the privileged ones, that we can handle in the kernel. If the * kernel can handle this instruction, we check for the problem * state bit and (a) handle the instruction or (b) send a code 2 * program check. diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S index 7e9d30d..ab0e041 100644 --- a/arch/s390/kvm/sie64a.S +++ b/arch/s390/kvm/sie64a.S @@ -48,10 +48,10 @@ sie_irq_handler: tm __TI_flags+7(%r2),_TIF_EXIT_SIE jz 0f larl %r2,sie_exit # work pending, leave sie - stg %r2,__LC_RETURN_PSW+8 + stg %r2,SPI_PSW+8(0,%r15) br %r14 0: larl %r2,sie_reenter # re-enter with guest id - stg %r2,__LC_RETURN_PSW+8 + stg %r2,SPI_PSW+8(0,%r15) 1: br %r14 /* diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index c66ffd8..1f1dba9 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -91,7 +91,7 @@ static long cmm_alloc_pages(long nr, long *counter, } else free_page((unsigned long) npa); } - diag10(addr); + diag10_range(addr >> PAGE_SHIFT, 1); pa->pages[pa->index++] = addr; (*counter)++; spin_unlock(&cmm_lock); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 2c57806..ab98813 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -392,7 +392,7 @@ void __kprobes do_protection_exception(struct pt_regs *regs, long pgm_int_code, { int fault; - /* Protection exception is supressing, decrement psw address. */ + /* Protection exception is suppressing, decrement psw address. */ regs->psw.addr -= (pgm_int_code >> 16); /* * Check for low-address protection. This needs to be treated @@ -543,7 +543,6 @@ static void pfault_interrupt(unsigned int ext_int_code, struct task_struct *tsk; __u16 subcode; - kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the external interruption subcode & pfault * initial/completion signal bit. VM stores this @@ -553,14 +552,15 @@ static void pfault_interrupt(unsigned int ext_int_code, subcode = ext_int_code >> 16; if ((subcode & 0xff00) != __SUBCODE_MASK) return; + kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the token (= address of the task structure of the affected task). */ #ifdef CONFIG_64BIT - tsk = *(struct task_struct **) param64; + tsk = (struct task_struct *) param64; #else - tsk = *(struct task_struct **) param32; + tsk = (struct task_struct *) param32; #endif if (subcode & 0x0080) { diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index 122ffbd..f05edcc 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -24,12 +24,13 @@ static void change_page_attr(unsigned long addr, int numpages, WARN_ON_ONCE(1); continue; } - ptep = pte_offset_kernel(pmdp, addr + i * PAGE_SIZE); + ptep = pte_offset_kernel(pmdp, addr); pte = *ptep; pte = set(pte); - ptep_invalidate(&init_mm, addr + i * PAGE_SIZE, ptep); + ptep_invalidate(&init_mm, addr, ptep); *ptep = pte; + addr += PAGE_SIZE; } } @@ -53,3 +54,8 @@ int set_memory_nx(unsigned long addr, int numpages) return 0; } EXPORT_SYMBOL_GPL(set_memory_nx); + +int set_memory_x(unsigned long addr, int numpages) +{ + return 0; +} diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 3d48f4d..33cbd37 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -517,12 +517,8 @@ stop_exit: static int check_hardware_prerequisites(void) { - unsigned long long facility_bits[2]; - - memcpy(facility_bits, S390_lowcore.stfle_fac_list, 32); - if (!(facility_bits[1] & (1ULL << 59))) + if (!test_facility(68)) return -EOPNOTSUPP; - return 0; } /* @@ -1025,20 +1021,14 @@ deallocate_exit: return rc; } -long hwsampler_query_min_interval(void) +unsigned long hwsampler_query_min_interval(void) { - if (min_sampler_rate) - return min_sampler_rate; - else - return -EINVAL; + return min_sampler_rate; } -long hwsampler_query_max_interval(void) +unsigned long hwsampler_query_max_interval(void) { - if (max_sampler_rate) - return max_sampler_rate; - else - return -EINVAL; + return max_sampler_rate; } unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu) diff --git a/arch/s390/oprofile/hwsampler.h b/arch/s390/oprofile/hwsampler.h index 8c72b59..1912f3b 100644 --- a/arch/s390/oprofile/hwsampler.h +++ b/arch/s390/oprofile/hwsampler.h @@ -102,8 +102,8 @@ int hwsampler_setup(void); int hwsampler_shutdown(void); int hwsampler_allocate(unsigned long sdbt, unsigned long sdb); int hwsampler_deallocate(void); -long hwsampler_query_min_interval(void); -long hwsampler_query_max_interval(void); +unsigned long hwsampler_query_min_interval(void); +unsigned long hwsampler_query_max_interval(void); int hwsampler_start_all(unsigned long interval); int hwsampler_stop_all(void); int hwsampler_deactivate(unsigned int cpu); diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index c63d7e5..5995e9b 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -145,15 +145,11 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops) * create hwsampler files only if hwsampler_setup() succeeds. */ oprofile_min_interval = hwsampler_query_min_interval(); - if (oprofile_min_interval < 0) { - oprofile_min_interval = 0; + if (oprofile_min_interval == 0) return -ENODEV; - } oprofile_max_interval = hwsampler_query_max_interval(); - if (oprofile_max_interval < 0) { - oprofile_max_interval = 0; + if (oprofile_max_interval == 0) return -ENODEV; - } if (oprofile_timer_init(ops)) return -ENODEV; diff --git a/arch/score/Makefile b/arch/score/Makefile index d77dc63..974aefe 100644 --- a/arch/score/Makefile +++ b/arch/score/Makefile @@ -40,5 +40,5 @@ archclean: define archhelp echo ' vmlinux.bin - Raw binary boot image' echo - echo ' These will be default as apropriate for a configured platform.' + echo ' These will be default as appropriate for a configured platform.' endef diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 12fec72..1553d56 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -82,7 +82,7 @@ config SH_NO_BSS_INIT help If running in painfully slow environments, such as an RTL simulation or from remote memory via SHdebug, where the memory - can already be gauranteed to ber zeroed on boot, say Y. + can already be guaranteed to ber zeroed on boot, say Y. For all other cases, say N. If this option seems perplexing, or you aren't sure, say N. diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index a9e3356..fa2a208 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> -#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <cpu/sh7757.h> #include <asm/sh_eth.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 636d831..618bd56 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -156,24 +156,34 @@ static struct platform_device nand_flash_device = { #define PORT_DRVCRA 0xA405018A #define PORT_DRVCRB 0xA405018C +static int ap320_wvga_set_brightness(void *board_data, int brightness) +{ + if (brightness) { + gpio_set_value(GPIO_PTS3, 0); + __raw_writew(0x100, FPGA_BKLREG); + } else { + __raw_writew(0, FPGA_BKLREG); + gpio_set_value(GPIO_PTS3, 1); + } + + return 0; +} + +static int ap320_wvga_get_brightness(void *board_data) +{ + return gpio_get_value(GPIO_PTS3); +} + static void ap320_wvga_power_on(void *board_data, struct fb_info *info) { msleep(100); /* ASD AP-320/325 LCD ON */ __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG); - - /* backlight */ - gpio_set_value(GPIO_PTS3, 0); - __raw_writew(0x100, FPGA_BKLREG); } static void ap320_wvga_power_off(void *board_data) { - /* backlight */ - __raw_writew(0, FPGA_BKLREG); - gpio_set_value(GPIO_PTS3, 1); - /* ASD AP-320/325 LCD OFF */ __raw_writew(0, FPGA_LCDREG); } @@ -209,6 +219,12 @@ static struct sh_mobile_lcdc_info lcdc_info = { .board_cfg = { .display_on = ap320_wvga_power_on, .display_off = ap320_wvga_power_off, + .set_brightness = ap320_wvga_set_brightness, + .get_brightness = ap320_wvga_get_brightness, + }, + .bl_info = { + .name = "sh_mobile_lcdc_bl", + .max_brightness = 1, }, } }; diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index 78cf2ab..f63d323 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -51,7 +51,7 @@ */ #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) -/* Return the hardware event's bit positon within the EMR/ESR */ +/* Return the hardware event's bit position within the EMR/ESR */ #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) /* diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index fd4ff25..86a0d56 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -263,6 +263,18 @@ const static struct fb_videomode ecovec_dvi_modes[] = { }, }; +static int ecovec24_set_brightness(void *board_data, int brightness) +{ + gpio_set_value(GPIO_PTR1, brightness); + + return 0; +} + +static int ecovec24_get_brightness(void *board_data) +{ + return gpio_get_value(GPIO_PTR1); +} + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, @@ -273,6 +285,12 @@ static struct sh_mobile_lcdc_info lcdc_info = { .height = 91, }, .board_cfg = { + .set_brightness = ecovec24_set_brightness, + .get_brightness = ecovec24_get_brightness, + }, + .bl_info = { + .name = "sh_mobile_lcdc_bl", + .max_brightness = 1, }, } }; @@ -936,7 +954,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) return; } - /* read MAC address frome EEPROM */ + /* read MAC address from EEPROM */ for (i = 0; i < sizeof(pd->mac_addr); i++) { pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 94186cf..f1147ca 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -23,7 +23,7 @@ static void landisk_power_off(void) { - __raw_writeb(0x01, PA_SHUTDOWN); + __raw_writeb(0x01, PA_SHUTDOWN); } static struct resource cf_ide_resources[3]; @@ -85,7 +85,7 @@ device_initcall(landisk_devices_setup); static void __init landisk_setup(char **cmdline_p) { - /* LED ON */ + /* LED ON */ __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED); printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); @@ -97,7 +97,6 @@ static void __init landisk_setup(char **cmdline_p) */ static struct sh_machine_vector mv_landisk __initmv = { .mv_name = "LANDISK", - .mv_nr_irqs = 72, .mv_setup = landisk_setup, .mv_init_irq = init_landisk_IRQ, }; diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index e71a531..77ec0e7 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -48,7 +48,6 @@ CONFIG_PREEMPT=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y CONFIG_PM_RUNTIME=y CONFIG_CPU_IDLE=y CONFIG_NET=y diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig index dc4a2eb..c416505 100644 --- a/arch/sh/configs/sdk7786_defconfig +++ b/arch/sh/configs/sdk7786_defconfig @@ -83,7 +83,6 @@ CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y CONFIG_PM_RUNTIME=y CONFIG_CPU_IDLE=y CONFIG_NET=y diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 4983a4d..5ede38c 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -61,7 +61,7 @@ #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ - #define SH7751_PCICONF3_HD7 0x00800000 /* Single Funtion device */ + #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */ #define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */ #define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */ #define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index a09c77d..194231c 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose) hose_tail = &hose->next; /* - * Do not panic here but later - this might hapen before console init. + * Do not panic here but later - this might happen before console init. */ if (!hose->io_map_base) { printk(KERN_WARNING diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index c4e0b3d..822d608 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -186,7 +186,7 @@ typedef struct page *pgtable_t; /* * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still * happily generate {ld/st}.q pairs, requiring us to have 8-byte - * alignment to avoid traps. The kmalloc alignment is gauranteed by + * alignment to avoid traps. The kmalloc alignment is guaranteed by * virtue of L1_CACHE_BYTES, requiring this to only be special cased * for slab caches. */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index b799fe7..0bce3d8 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x) #endif /* - * Mask of bits that are to be preserved accross pgprot changes. + * Mask of bits that are to be preserved across pgprot changes. */ #define _PAGE_CHG_MASK \ (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \ diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h index c48a9c3..95adc50 100644 --- a/arch/sh/include/asm/unaligned-sh4a.h +++ b/arch/sh/include/asm/unaligned-sh4a.h @@ -9,7 +9,7 @@ * struct. * * The same note as with the movli.l/movco.l pair applies here, as long - * as the load is gauranteed to be inlined, nothing else will hook in to + * as the load is guaranteed to be inlined, nothing else will hook in to * r0 and we get the return value for free. * * NOTE: Due to the fact we require r0 encoding, care should be taken to diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h index 5d9d4d5..6ce944e 100644 --- a/arch/sh/include/mach-common/mach/highlander.h +++ b/arch/sh/include/mach-common/mach/highlander.h @@ -24,7 +24,7 @@ #define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ #define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ #define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */ #define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ #define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ #define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ @@ -89,7 +89,7 @@ #define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ #define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ #define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ -#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */ #define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ #define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ #define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h index 0a80015..e04f75e 100644 --- a/arch/sh/include/mach-common/mach/r2d.h +++ b/arch/sh/include/mach-common/mach/r2d.h @@ -18,18 +18,18 @@ #define PA_DISPCTL 0xa4000008 /* Display Timing control */ #define PA_SDMPOW 0xa400000a /* SD Power control */ #define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ -#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_PCICD 0xa400000e /* PCI Extension detect control */ #define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ #define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ #define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ #define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ -#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */ #define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ #define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ #define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ -#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */ #define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ #define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c index dd0e0f2..8f63a26 100644 --- a/arch/sh/kernel/cpu/clock-cpg.c +++ b/arch/sh/kernel/cpu/clock-cpg.c @@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void) } /* - * Placeholder for compatability, until the lazy CPUs do this + * Placeholder for compatibility, until the lazy CPUs do this * on their own. */ int __init __weak arch_clk_init(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 1656b8c..beba32b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void) * The following settings are necessary * for using the USB modules. * - * see "USB Inital Settings" for detail + * see "USB Initial Settings" for detail */ __raw_writel(USBINITVAL1, USBINITREG1); __raw_writel(USBINITVAL2, USBINITREG2); diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c index 6dcb816..22db127 100644 --- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c +++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c @@ -139,7 +139,7 @@ void platform_pm_runtime_suspend_idle(void) queue_work(pm_wq, &hwblk_work); } -int platform_pm_runtime_suspend(struct device *dev) +static int default_platform_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct pdev_archdata *ad = &pdev->archdata; @@ -147,7 +147,7 @@ int platform_pm_runtime_suspend(struct device *dev) int hwblk = ad->hwblk_id; int ret = 0; - dev_dbg(dev, "platform_pm_runtime_suspend() [%d]\n", hwblk); + dev_dbg(dev, "%s() [%d]\n", __func__, hwblk); /* ignore off-chip platform devices */ if (!hwblk) @@ -183,20 +183,20 @@ int platform_pm_runtime_suspend(struct device *dev) mutex_unlock(&ad->mutex); out: - dev_dbg(dev, "platform_pm_runtime_suspend() [%d] returns %d\n", - hwblk, ret); + dev_dbg(dev, "%s() [%d] returns %d\n", + __func__, hwblk, ret); return ret; } -int platform_pm_runtime_resume(struct device *dev) +static int default_platform_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct pdev_archdata *ad = &pdev->archdata; int hwblk = ad->hwblk_id; int ret = 0; - dev_dbg(dev, "platform_pm_runtime_resume() [%d]\n", hwblk); + dev_dbg(dev, "%s() [%d]\n", __func__, hwblk); /* ignore off-chip platform devices */ if (!hwblk) @@ -228,19 +228,19 @@ int platform_pm_runtime_resume(struct device *dev) */ mutex_unlock(&ad->mutex); out: - dev_dbg(dev, "platform_pm_runtime_resume() [%d] returns %d\n", - hwblk, ret); + dev_dbg(dev, "%s() [%d] returns %d\n", + __func__, hwblk, ret); return ret; } -int platform_pm_runtime_idle(struct device *dev) +static int default_platform_runtime_idle(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int hwblk = pdev->archdata.hwblk_id; int ret = 0; - dev_dbg(dev, "platform_pm_runtime_idle() [%d]\n", hwblk); + dev_dbg(dev, "%s() [%d]\n", __func__, hwblk); /* ignore off-chip platform devices */ if (!hwblk) @@ -252,10 +252,19 @@ int platform_pm_runtime_idle(struct device *dev) /* suspend synchronously to disable clocks immediately */ ret = pm_runtime_suspend(dev); out: - dev_dbg(dev, "platform_pm_runtime_idle() [%d] done!\n", hwblk); + dev_dbg(dev, "%s() [%d] done!\n", __func__, hwblk); return ret; } +static struct dev_power_domain default_power_domain = { + .ops = { + .runtime_suspend = default_platform_runtime_suspend, + .runtime_resume = default_platform_runtime_resume, + .runtime_idle = default_platform_runtime_idle, + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + static int platform_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { @@ -276,6 +285,7 @@ static int platform_bus_notify(struct notifier_block *nb, hwblk_disable(hwblk_info, hwblk); /* make sure driver re-inits itself once */ __set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags); + dev->pwr_domain = &default_power_domain; break; /* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */ case BUS_NOTIFY_BOUND_DRIVER: @@ -289,6 +299,7 @@ static int platform_bus_notify(struct notifier_block *nb, __set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags); break; case BUS_NOTIFY_DEL_DEVICE: + dev->pwr_domain = NULL; break; } return 0; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 64ea0b1..9197110 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -183,7 +183,7 @@ asmlinkage void do_softirq(void) ); /* - * Shouldnt happen, we returned above if in_interrupt(): + * Shouldn't happen, we returned above if in_interrupt(): */ WARN_ON_ONCE(softirq_count()); } diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 2130ca6..3d7b209 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -117,7 +117,11 @@ void user_enable_single_step(struct task_struct *child) set_tsk_thread_flag(child, TIF_SINGLESTEP); + if (ptrace_get_breakpoints(child) < 0) + return; + set_single_step(child, pc); + ptrace_put_breakpoints(child); } void user_disable_single_step(struct task_struct *child) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 4f26716..58bff45 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -150,7 +150,7 @@ void __init check_for_initrd(void) } /* - * If we got this far inspite of the boot loader's best efforts + * If we got this far in spite of the boot loader's best efforts * to the contrary, assume we actually have a valid initrd and * fix up the root dev. */ diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 509b36b..6207561 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/cpu.h> #include <linux/interrupt.h> +#include <linux/sched.h> #include <asm/atomic.h> #include <asm/processor.h> #include <asm/system.h> @@ -323,6 +324,7 @@ void smp_message_recv(unsigned int msg) generic_smp_call_function_interrupt(); break; case SMP_MSG_RESCHEDULE: + scheduler_ipi(); break; case SMP_MSG_FUNCTION_SINGLE: generic_smp_call_function_single_interrupt(); diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S index 2a62816..49aeabe 100644 --- a/arch/sh/lib64/copy_user_memcpy.S +++ b/arch/sh/lib64/copy_user_memcpy.S @@ -27,7 +27,7 @@ ! 2.: When there are two or three bytes in the last word of an 11-or-more ! bytes memory chunk to b copied, the rest of the word can be read ! without side effects. -! This could be easily changed by increasing the minumum size of +! This could be easily changed by increasing the minimum size of ! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, ! however, this would cost a few extra cyles on average. ! For SHmedia, the assumption is that any quadword can be read in its diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S index dd300c3..5d682e0 100644 --- a/arch/sh/lib64/memcpy.S +++ b/arch/sh/lib64/memcpy.S @@ -29,7 +29,7 @@ ! 2.: When there are two or three bytes in the last word of an 11-or-more ! bytes memory chunk to b copied, the rest of the word can be read ! without side effects. -! This could be easily changed by increasing the minumum size of +! This could be easily changed by increasing the minimum size of ! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, ! however, this would cost a few extra cyles on average. ! For SHmedia, the assumption is that any quadword can be read in its diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h index bafe5a6..7568640 100644 --- a/arch/sparc/include/asm/hypervisor.h +++ b/arch/sparc/include/asm/hypervisor.h @@ -654,7 +654,7 @@ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, * ARG3: mmu context * ARG4: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address, context, or + * ERRORS: EINVAL Invalid virtual address, context, or * flags value * ENOTSUPPORTED ARG0 or ARG1 is non-zero * @@ -721,7 +721,7 @@ extern void sun4v_mmu_demap_all(void); * ARG2: TTE * ARG3: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value + * ERRORS: EINVAL Invalid virtual address or flags value * EBADPGSZ Invalid page size value * ENORADDR Invalid real address in TTE * ETOOMANY Too many mappings (max of 8 reached) @@ -800,7 +800,7 @@ extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, * ARG1: reserved, must be zero * ARG2: flags (HV_MMU_{IMMU,DMMU}) * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value + * ERRORS: EINVAL Invalid virtual address or flags value * ENOMAP Specified mapping was not found * * Demaps any permanent page mapping (established via @@ -1205,7 +1205,7 @@ struct hv_trap_trace_control { * structure contents. Attempts to do so will result in undefined * behavior for the guest. * - * Each trap trace buffer entry is layed out as follows: + * Each trap trace buffer entry is laid out as follows: */ #ifndef __ASSEMBLY__ struct hv_trap_trace_entry { @@ -1300,7 +1300,7 @@ struct hv_trap_trace_entry { * state in RET1. Future systems may define various flags for the * enable argument (ARG0), for the moment a guest should pass * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all - * tracing - which will ensure future compatability. + * tracing - which will ensure future compatibility. */ #define HV_FAST_TTRACE_ENABLE 0x92 @@ -1880,7 +1880,7 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * pci_device, at pci_config_offset from the beginning of the device's * configuration space. If there was no error, RET1 is set to zero and * RET2 is set to the data read. Insignificant bits in RET2 are not - * guarenteed to have any specific value and therefore must be ignored. + * guaranteed to have any specific value and therefore must be ignored. * * The data returned in RET2 is size based byte swapped. * @@ -1941,9 +1941,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * and return the actual data read in RET2. The data returned is size based * byte swapped. * - * Non-significant bits in RET2 are not guarenteed to have any specific value + * Non-significant bits in RET2 are not guaranteed to have any specific value * and therefore must be ignored. If RET1 is returned as non-zero, the data - * value is not guarenteed to have any specific value and should be ignored. + * value is not guaranteed to have any specific value and should be ignored. * * The caller must have permission to read from the given devhandle, real * address, which must be an IO address. The argument real address must be a @@ -2456,9 +2456,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * * As receive queue configuration causes a reset of the queue's head and * tail pointers there is no way for a gues to determine how many entries - * have been received between a preceeding ldc_get_rx_state() API call + * have been received between a preceding ldc_get_rx_state() API call * and the completion of the configuration operation. It should be noted - * that datagram delivery is not guarenteed via domain channels anyway, + * that datagram delivery is not guaranteed via domain channels anyway, * and therefore any higher protocol should be resilient to datagram * loss if necessary. However, to overcome this specific race potential * it is recommended, for example, that a higher level protocol be employed diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h index 427d468..fc73a82 100644 --- a/arch/sparc/include/asm/jump_label.h +++ b/arch/sparc/include/asm/jump_label.h @@ -7,17 +7,20 @@ #define JUMP_LABEL_NOP_SIZE 4 -#define JUMP_LABEL(key, label) \ - do { \ - asm goto("1:\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - ".pushsection __jump_table, \"a\"\n\t"\ - ".align 4\n\t" \ - ".word 1b, %l[" #label "], %c0\n\t" \ - ".popsection \n\t" \ - : : "i" (key) : : label);\ - } while (0) +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:\n\t" + "nop\n\t" + "nop\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + ".align 4\n\t" + ".word 1b, %l[l_yes], %c0\n\t" + ".popsection \n\t" + : : "i" (key) : : l_yes); + return false; +l_yes: + return true; +} #endif /* __KERNEL__ */ diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h index 686defe..af75548 100644 --- a/arch/sparc/include/asm/ns87303.h +++ b/arch/sparc/include/asm/ns87303.h @@ -37,7 +37,7 @@ /* Power and Test Register (PTR) bits */ #define PTR_LPTB_IRQ7 0x08 #define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ -#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ +#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controls direction */ /* of the parallel port */ /* Function Control Register (FCR) bits */ diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index 843e4fa..288d7be 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -31,7 +31,7 @@ extern unsigned int picl_shift; /* In order to commonize as much of the implementation as * possible, we use PICH as our counter. Mostly this is - * to accomodate Niagara-1 which can only count insn cycles + * to accommodate Niagara-1 which can only count insn cycles * in PICH. */ static inline u64 picl_value(unsigned int nmi_hz) diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index 30b0b79..c7ad3fe 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -33,7 +33,7 @@ struct pt_regs { * things like "in a system call" etc. for an arbitray * process. * - * The PT_REGS_MAGIC is choosen such that it can be + * The PT_REGS_MAGIC is chosen such that it can be * loaded completely using just a sethi instruction. */ unsigned int magic; diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h index 1c79f32..8b9c556 100644 --- a/arch/sparc/include/asm/topology_64.h +++ b/arch/sparc/include/asm/topology_64.h @@ -65,6 +65,10 @@ static inline int pcibus_to_node(struct pci_bus *pbus) #define smt_capable() (sparc64_multi_core) #endif /* CONFIG_SMP */ -#define cpu_coregroup_mask(cpu) (&cpu_core_map[cpu]) +extern cpumask_t cpu_core_map[NR_CPUS]; +static inline const struct cpumask *cpu_coregroup_mask(int cpu) +{ + return &cpu_core_map[cpu]; +} #endif /* _ASM_SPARC64_TOPOLOGY_H */ diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index f679c57..1e34f29 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -165,7 +165,7 @@ static int __devinit apc_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata apc_match[] = { +static struct of_device_id apc_match[] = { { .name = APC_OBPNAME, }, diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 906ee3e..6da784a 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -801,7 +801,7 @@ vac_linesize_patch_32: subcc %l7, 32, %l7 .globl vac_hwflush_patch1_on, vac_hwflush_patch2_on /* - * Ugly, but we cant use hardware flushing on the sun4 and we'd require + * Ugly, but we can't use hardware flushing on the sun4 and we'd require * two instructions (Anton) */ vac_hwflush_patch1_on: addcc %l7, -PAGE_SIZE, %l7 @@ -851,7 +851,7 @@ sun4c_fault: sethi %hi(~((1 << SUN4C_REAL_PGDIR_SHIFT) - 1)), %l4 /* If the kernel references a bum kernel pointer, or a pte which - * points to a non existant page in ram, we will run this code + * points to a non existent page in ram, we will run this code * _forever_ and lock up the machine!!!!! So we must check for * this condition, the AC_SYNC_ERR bits are what we must examine. * Also a parity error would make this happen as well. So we just diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index f8f2105..aa594c7 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -85,7 +85,7 @@ sparc_ramdisk_image64: sparc64_boot: mov %o4, %l7 - /* We need to remap the kernel. Use position independant + /* We need to remap the kernel. Use position independent * code to remap us to KERNBASE. * * SILO can invoke us with 32-bit address masking enabled, diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c index 5fe3d65..35f141a 100644 --- a/arch/sparc/kernel/init_task.c +++ b/arch/sparc/kernel/init_task.c @@ -15,7 +15,7 @@ EXPORT_SYMBOL(init_task); /* .text section in head.S is aligned at 8k boundary and this gets linked * right after that so that the init_thread_union is aligned properly as well. - * If this is not aligned on a 8k boundry, then you should change code + * If this is not aligned on a 8k boundary, then you should change code * in etrap.S which assumes it. */ union thread_union init_thread_union __init_task_data = diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 63cd4e5..5c14968 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -459,7 +459,7 @@ apply_interrupt_map(struct device_node *dp, struct device_node *pp, * * Handle this by deciding that, if we didn't get a * match in the parent's 'interrupt-map', and the - * parent is an IRQ translater, then use the parent as + * parent is an IRQ translator, then use the parent as * our IRQ controller. */ if (pp->irq_trans) diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 948068a..d1840db 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -452,8 +452,10 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, sabre_scan_bus(pbm, &op->dev); } +static const struct of_device_id sabre_match[]; static int __devinit sabre_probe(struct platform_device *op) { + const struct of_device_id *match; const struct linux_prom64_registers *pr_regs; struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; @@ -463,7 +465,8 @@ static int __devinit sabre_probe(struct platform_device *op) const u32 *vdma; u64 clear_irq; - hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL); + match = of_match_device(sabre_match, &op->dev); + hummingbird_p = match && (match->data != NULL); if (!hummingbird_p) { struct device_node *cpu_dp; diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index fecfcb2..283fbc3 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -1458,11 +1458,15 @@ out_err: return err; } +static const struct of_device_id schizo_match[]; static int __devinit schizo_probe(struct platform_device *op) { - if (!op->dev.of_match) + const struct of_device_id *match; + + match = of_match_device(schizo_match, &op->dev); + if (!match) return -EINVAL; - return __schizo_init(op, (unsigned long) op->dev.of_match->data); + return __schizo_init(op, (unsigned long)match->data); } /* The ordering of this table is very important. Some Tomatillo diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 7605786..ee8426e 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1027,7 +1027,7 @@ static int sparc_pmu_add(struct perf_event *event, int ef_flags) /* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time(->commit_txn) as a whole */ if (cpuc->group_flag & PERF_EVENT_TXN) diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 93d7b44..6a585d3 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -69,7 +69,7 @@ static int __devinit pmc_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata pmc_match[] = { +static struct of_device_id pmc_match[] = { { .name = PMC_OBPNAME, }, diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c index 91c10fb..442286d 100644 --- a/arch/sparc/kernel/smp_32.c +++ b/arch/sparc/kernel/smp_32.c @@ -53,6 +53,7 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE; void __cpuinit smp_store_cpu_info(int id) { int cpu_node; + int mid; cpu_data(id).udelay_val = loops_per_jiffy; @@ -60,10 +61,13 @@ void __cpuinit smp_store_cpu_info(int id) cpu_data(id).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); cpu_data(id).prom_node = cpu_node; - cpu_data(id).mid = cpu_get_hwmid(cpu_node); + mid = cpu_get_hwmid(cpu_node); - if (cpu_data(id).mid < 0) - panic("No MID found for CPU%d at node 0x%08d", id, cpu_node); + if (mid < 0) { + printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08d", id, cpu_node); + mid = 0; + } + cpu_data(id).mid = mid; } void __init smp_cpus_done(unsigned int max_cpus) @@ -125,7 +129,9 @@ struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 }; void smp_send_reschedule(int cpu) { - /* See sparc64 */ + /* + * XXX missing reschedule IPI, see scheduler_ipi() + */ } void smp_send_stop(void) diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 3e94a8c..9478da7 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1368,6 +1368,7 @@ void smp_send_reschedule(int cpu) void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs) { clear_softint(1 << irq); + scheduler_ipi(); } /* This is a nop because we capture all other cpus diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 4e23639..96046a4 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -168,7 +168,7 @@ static int __devinit clock_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata clock_match[] = { +static struct of_device_id clock_match[] = { { .name = "eeprom", }, diff --git a/arch/sparc/lib/checksum_32.S b/arch/sparc/lib/checksum_32.S index 3632cb3..0084c33 100644 --- a/arch/sparc/lib/checksum_32.S +++ b/arch/sparc/lib/checksum_32.S @@ -289,10 +289,16 @@ cc_end_cruft: /* Also, handle the alignment code out of band. */ cc_dword_align: - cmp %g1, 6 - bl,a ccte + cmp %g1, 16 + bge 1f + srl %g1, 1, %o3 +2: cmp %o3, 0 + be,a ccte andcc %g1, 0xf, %o3 - andcc %o0, 0x1, %g0 + andcc %o3, %o0, %g0 ! Check %o0 only (%o1 has the same last 2 bits) + be,a 2b + srl %o3, 1, %o3 +1: andcc %o0, 0x1, %g0 bne ccslow andcc %o0, 0x2, %g0 be 1f diff --git a/arch/sparc/math-emu/Makefile b/arch/sparc/math-emu/Makefile index b9085ec..825dbee 100644 --- a/arch/sparc/math-emu/Makefile +++ b/arch/sparc/math-emu/Makefile @@ -2,7 +2,7 @@ # Makefile for the FPU instruction emulation. # -# supress all warnings - as math.c produces a lot! +# suppress all warnings - as math.c produces a lot! ccflags-y := -w obj-y := math_$(BITS).o diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 6e2cdd5..e32b0c2 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -51,7 +51,7 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool y -# FIXME: tilegx can implement a more efficent rwsem. +# FIXME: tilegx can implement a more efficient rwsem. config RWSEM_GENERIC_SPINLOCK def_bool y diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h index 146e47d..f13188a 100644 --- a/arch/tile/include/hv/drv_xgbe_intf.h +++ b/arch/tile/include/hv/drv_xgbe_intf.h @@ -319,7 +319,7 @@ typedef union * is an error code, or zero if no error. The val0 member is the * updated value of seqno; it has been incremented by 1 for each * packet sent. That increment may be less than nentries if an - * error occured, or if some of the entries in the vector contain + * error occurred, or if some of the entries in the vector contain * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the * updated value of nentries; it has been decremented by 1 for each * vector entry processed. Again, that decrement may be less than diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index 1b8bf03..ee41bca 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -1340,7 +1340,7 @@ typedef struct * this operation. If any permanent delivery errors were encountered, * the routine returns HV_ERECIP. In the event of permanent delivery * errors, it may be the case that delivery was not attempted to all - * recipients; if any messages were succesfully delivered, however, + * recipients; if any messages were successfully delivered, however, * recipients' state values will be updated appropriately. * * It is explicitly legal to specify a recipient structure whose state @@ -1359,7 +1359,7 @@ typedef struct * never call hv_receive_message, or could register a different state * buffer, losing the message. * - * Specifiying the same recipient more than once in the recipient list + * Specifying the same recipient more than once in the recipient list * is an error, which will not result in an error return but which may * or may not result in more than one message being delivered to the * recipient tile. diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index a1ee25b..ea38f0c 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -36,7 +36,7 @@ * Initialization flow and process * ------------------------------- * - * This files containes the routines to search for PCI buses, + * This files contains the routines to search for PCI buses, * enumerate the buses, and configure any attached devices. * * There are two entry points here: @@ -519,7 +519,7 @@ static int __devinit tile_cfg_read(struct pci_bus *bus, /* - * See tile_cfg_read() for relevent comments. + * See tile_cfg_read() for relevant comments. * Note that "val" is the value to write, not a pointer to that value. */ static int __devinit tile_cfg_write(struct pci_bus *bus, diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c index a429310..c52224d 100644 --- a/arch/tile/kernel/smp.c +++ b/arch/tile/kernel/smp.c @@ -189,12 +189,8 @@ void flush_icache_range(unsigned long start, unsigned long end) /* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */ static irqreturn_t handle_reschedule_ipi(int irq, void *token) { - /* - * Nothing to do here; when we return from interrupt, the - * rescheduling will occur there. But do bump the interrupt - * profiler count in the meantime. - */ __get_cpu_var(irq_stat).irq_resched_count++; + scheduler_ipi(); return IRQ_HANDLED; } diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index 758f597..51f8663 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -290,7 +290,7 @@ static int handle_page_fault(struct pt_regs *regs, /* * Early on, we need to check for migrating PTE entries; * see homecache.c. If we find a migrating PTE, we wait until - * the backing page claims to be done migrating, then we procede. + * the backing page claims to be done migrating, then we proceed. * For kernel PTEs, we rewrite the PTE and return and retry. * Otherwise, we treat the fault like a normal "no PTE" fault, * rather than trying to patch up the existing PTE. diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c index 201a582..42cfcba 100644 --- a/arch/tile/mm/hugetlbpage.c +++ b/arch/tile/mm/hugetlbpage.c @@ -219,7 +219,7 @@ try_again: if (mm->free_area_cache < len) goto fail; - /* either no address requested or cant fit in requested address hole */ + /* either no address requested or can't fit in requested address hole */ addr = (mm->free_area_cache - len) & huge_page_mask(h); do { /* diff --git a/arch/um/Kconfig.net b/arch/um/Kconfig.net index 9e9a4aa..3160b1a 100644 --- a/arch/um/Kconfig.net +++ b/arch/um/Kconfig.net @@ -186,7 +186,7 @@ config UML_NET_SLIRP other transports, SLiRP works without the need of root level privleges, setuid binaries, or SLIP devices on the host. This also means not every type of connection is possible, but most - situations can be accomodated with carefully crafted slirp + situations can be accommodated with carefully crafted slirp commands that can be passed along as part of the network device's setup string. The effect of this transport on the UML is similar that of a host behind a firewall that masquerades all network diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um index 90a438a..b5e675e 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig.um @@ -47,7 +47,7 @@ config HOSTFS config HPPFS tristate "HoneyPot ProcFS (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && PROC_FS help hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc entries to be overridden, removed, or fabricated from the host. diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index 02fb017..a9da516 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -4,6 +4,10 @@ menu "UML-specific options" menu "Host processor type and features" +config CMPXCHG_LOCAL + bool + default n + source "arch/x86/Kconfig.cpu" endmenu diff --git a/arch/um/include/asm/bug.h b/arch/um/include/asm/bug.h new file mode 100644 index 0000000..9e33b86 --- /dev/null +++ b/arch/um/include/asm/bug.h @@ -0,0 +1,6 @@ +#ifndef __UM_BUG_H +#define __UM_BUG_H + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index e2cf786..5bd1bad 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -49,7 +49,10 @@ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; unsigned long mask = THREAD_SIZE - 1; - ti = (struct thread_info *) (((unsigned long) &ti) & ~mask); + void *p; + + asm volatile ("" : "=r" (p) : "0" (&ti)); + ti = (struct thread_info *) (((unsigned long)p) & ~mask); return ti; } diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c index 106bf27..eefb107 100644 --- a/arch/um/kernel/smp.c +++ b/arch/um/kernel/smp.c @@ -173,7 +173,7 @@ void IPI_handler(int cpu) break; case 'R': - set_tsk_need_resched(current); + scheduler_ipi(); break; case 'S': diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index 6ea7797..42827ca 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -5,6 +5,7 @@ #include <stdio.h> #include <stdlib.h> +#include <unistd.h> #include <errno.h> #include <signal.h> #include <string.h> @@ -75,6 +76,26 @@ void setup_hostinfo(char *buf, int len) host.release, host.version, host.machine); } +/* + * We cannot use glibc's abort(). It makes use of tgkill() which + * has no effect within UML's kernel threads. + * After that glibc would execute an invalid instruction to kill + * the calling process and UML crashes with SIGSEGV. + */ +static inline void __attribute__ ((noreturn)) uml_abort(void) +{ + sigset_t sig; + + fflush(NULL); + + if (!sigemptyset(&sig) && !sigaddset(&sig, SIGABRT)) + sigprocmask(SIG_UNBLOCK, &sig, 0); + + for (;;) + if (kill(getpid(), SIGABRT) < 0) + exit(127); +} + void os_dump_core(void) { int pid; @@ -116,5 +137,5 @@ void os_dump_core(void) while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0) os_kill_ptraced_process(pid, 0); - abort(); + uml_abort(); } diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 804b28d..b1da91c 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -4,7 +4,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \ - sys_call_table.o tls.o + sys_call_table.o tls.o atomic64_cx8_32.o obj-$(CONFIG_BINFMT_ELF) += elfcore.o diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S new file mode 100644 index 0000000..1e901d3 --- /dev/null +++ b/arch/um/sys-i386/atomic64_cx8_32.S @@ -0,0 +1,225 @@ +/* + * atomic64_t for 586+ + * + * Copied from arch/x86/lib/atomic64_cx8_32.S + * + * Copyright © 2010 Luca Barbieri + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/linkage.h> +#include <asm/alternative-asm.h> +#include <asm/dwarf2.h> + +.macro SAVE reg + pushl_cfi %\reg + CFI_REL_OFFSET \reg, 0 +.endm + +.macro RESTORE reg + popl_cfi %\reg + CFI_RESTORE \reg +.endm + +.macro read64 reg + movl %ebx, %eax + movl %ecx, %edx +/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */ + LOCK_PREFIX + cmpxchg8b (\reg) +.endm + +ENTRY(atomic64_read_cx8) + CFI_STARTPROC + + read64 %ecx + ret + CFI_ENDPROC +ENDPROC(atomic64_read_cx8) + +ENTRY(atomic64_set_cx8) + CFI_STARTPROC + +1: +/* we don't need LOCK_PREFIX since aligned 64-bit writes + * are atomic on 586 and newer */ + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_set_cx8) + +ENTRY(atomic64_xchg_cx8) + CFI_STARTPROC + + movl %ebx, %eax + movl %ecx, %edx +1: + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_xchg_cx8) + +.macro addsub_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx + SAVE esi + SAVE edi + + movl %eax, %esi + movl %edx, %edi + movl %ecx, %ebp + + read64 %ebp +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l %esi, %ebx + \insc\()l %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE edi + RESTORE esi + RESTORE ebx + RESTORE ebp + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +addsub_return add add adc +addsub_return sub sub sbb + +.macro incdec_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l $1, %ebx + \insc\()l $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +incdec_return inc add adc +incdec_return dec sub sbb + +ENTRY(atomic64_dec_if_positive_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + subl $1, %ebx + sbb $0, %ecx + js 2f + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +2: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_dec_if_positive_cx8) + +ENTRY(atomic64_add_unless_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx +/* these just push these two parameters on the stack */ + SAVE edi + SAVE esi + + movl %ecx, %ebp + movl %eax, %esi + movl %edx, %edi + + read64 %ebp +1: + cmpl %eax, 0(%esp) + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl %esi, %ebx + adcl %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + + movl $1, %eax +3: + addl $8, %esp + CFI_ADJUST_CFA_OFFSET -8 + RESTORE ebx + RESTORE ebp + ret +4: + cmpl %edx, 4(%esp) + jne 2b + xorl %eax, %eax + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_add_unless_cx8) + +ENTRY(atomic64_inc_not_zero_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + testl %eax, %eax + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl $1, %ebx + adcl $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + movl $1, %eax +3: + RESTORE ebx + ret +4: + testl %edx, %edx + jne 2b + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_inc_not_zero_cx8) diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h index 885bb62..aa22df7 100644 --- a/arch/unicore32/include/mach/regs-umal.h +++ b/arch/unicore32/include/mach/regs-umal.h @@ -52,7 +52,7 @@ */ #define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030) /* - * MII Managment Indicator UMAL_MIIIDCT + * MII Management Indicator UMAL_MIIIDCT */ #define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034) /* @@ -91,7 +91,7 @@ #define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078) #define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c) -/* MAHBE MODUEL OF UMAL */ +/* MAHBE MODULE OF UMAL */ /* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master * and Slave ports.Registers within the M-AHBE provide Control and Status * information concerning these transfers. diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S index 92255f3..8caf322 100644 --- a/arch/unicore32/kernel/head.S +++ b/arch/unicore32/kernel/head.S @@ -164,7 +164,7 @@ ENTRY(stext) ENDPROC(stext) /* - * Enable the MMU. This completely changes the stucture of the visible + * Enable the MMU. This completely changes the structure of the visible * memory space. You will not be able to trace execution through this. * * r0 = cp#0 control register diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c index 2aa30a3..d4efa7d 100644 --- a/arch/unicore32/kernel/irq.c +++ b/arch/unicore32/kernel/irq.c @@ -23,7 +23,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/gpio.h> #include <asm/system.h> @@ -237,7 +237,7 @@ static struct puv3_irq_state { unsigned int iccr; } puv3_irq_state; -static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state) +static int puv3_irq_suspend(void) { struct puv3_irq_state *st = &puv3_irq_state; @@ -265,7 +265,7 @@ static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state) return 0; } -static int puv3_irq_resume(struct sys_device *dev) +static void puv3_irq_resume(void) { struct puv3_irq_state *st = &puv3_irq_state; @@ -278,27 +278,20 @@ static int puv3_irq_resume(struct sys_device *dev) writel(st->icmr, INTC_ICMR); } - return 0; } -static struct sysdev_class puv3_irq_sysclass = { - .name = "pkunity-irq", +static struct syscore_ops puv3_irq_syscore_ops = { .suspend = puv3_irq_suspend, .resume = puv3_irq_resume, }; -static struct sys_device puv3_irq_device = { - .id = 0, - .cls = &puv3_irq_sysclass, -}; - -static int __init puv3_irq_init_devicefs(void) +static int __init puv3_irq_init_syscore(void) { - sysdev_class_register(&puv3_irq_sysclass); - return sysdev_register(&puv3_irq_device); + register_syscore_ops(&puv3_irq_syscore_ops); + return 0; } -device_initcall(puv3_irq_init_devicefs); +device_initcall(puv3_irq_init_syscore); void __init init_IRQ(void) { diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cc6c53a..4168e5d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -8,6 +8,7 @@ config 64BIT config X86_32 def_bool !64BIT + select CLKSRC_I8253 config X86_64 def_bool 64BIT @@ -71,7 +72,6 @@ config X86 select GENERIC_IRQ_SHOW select IRQ_FORCED_THREADING select USE_GENERIC_SMP_HELPERS if SMP - select ARCH_NO_SYSDEV_OPS config INSTRUCTION_DECODER def_bool (KPROBES || PERF_EVENTS) @@ -112,7 +112,14 @@ config MMU def_bool y config ZONE_DMA - def_bool y + bool "DMA memory allocation support" if EXPERT + default y + help + DMA memory allocation support allows devices with less than 32-bit + addressing to allocate within the first 16MB of address space. + Disable if no such devices will be used. + + If unsure, say Y. config SBUS bool @@ -365,17 +372,6 @@ config X86_UV # Following is an alphabetically sorted list of 32 bit extended platforms # Please maintain the alphabetic order if and when there are additions -config X86_ELAN - bool "AMD Elan" - depends on X86_32 - depends on X86_EXTENDED_PLATFORM - ---help--- - Select this for an AMD Elan processor. - - Do not use this option for K6/Athlon/Opteron processors! - - If unsure, choose "PC-compatible" instead. - config X86_INTEL_CE bool "CE4100 TV platform" depends on PCI @@ -690,6 +686,7 @@ config AMD_IOMMU bool "AMD IOMMU support" select SWIOTLB select PCI_MSI + select PCI_IOV depends on X86_64 && PCI && ACPI ---help--- With this option you can enable support for AMD IOMMU hardware in @@ -1174,7 +1171,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" - depends on X86_64 && NUMA && PCI + depends on NUMA && PCI ---help--- Enable AMD NUMA node topology detection. You should say Y here if you have a multi processor AMD system. This uses an old method to @@ -1201,7 +1198,7 @@ config NODES_SPAN_OTHER_NODES config NUMA_EMU bool "NUMA emulation" - depends on X86_64 && NUMA + depends on NUMA ---help--- Enable NUMA emulation. A flat machine will be split into virtual nodes when booted with "numa=fake=N", where N is the @@ -1223,6 +1220,10 @@ config HAVE_ARCH_BOOTMEM def_bool y depends on X86_32 && NUMA +config HAVE_ARCH_ALLOC_REMAP + def_bool y + depends on X86_32 && NUMA + config ARCH_HAVE_MEMORY_PRESENT def_bool y depends on X86_32 && DISCONTIGMEM @@ -1231,13 +1232,9 @@ config NEED_NODE_MEMMAP_SIZE def_bool y depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) -config HAVE_ARCH_ALLOC_REMAP - def_bool y - depends on X86_32 && NUMA - config ARCH_FLATMEM_ENABLE def_bool y - depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA + depends on X86_32 && !NUMA config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -1247,20 +1244,16 @@ config ARCH_DISCONTIGMEM_DEFAULT def_bool y depends on NUMA && X86_32 -config ARCH_PROC_KCORE_TEXT - def_bool y - depends on X86_64 && PROC_KCORE - -config ARCH_SPARSEMEM_DEFAULT - def_bool y - depends on X86_64 - config ARCH_SPARSEMEM_ENABLE def_bool y depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD select SPARSEMEM_STATIC if X86_32 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 +config ARCH_SPARSEMEM_DEFAULT + def_bool y + depends on X86_64 + config ARCH_SELECT_MEMORY_MODEL def_bool y depends on ARCH_SPARSEMEM_ENABLE @@ -1269,6 +1262,10 @@ config ARCH_MEMORY_PROBE def_bool X86_64 depends on MEMORY_HOTPLUG +config ARCH_PROC_KCORE_TEXT + def_bool y + depends on X86_64 && PROC_KCORE + config ILLEGAL_POINTER_VALUE hex default 0 if X86_32 @@ -1703,10 +1700,6 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE def_bool y depends on MEMORY_HOTPLUG -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool X86_64 - depends on NUMA - config USE_PERCPU_NUMA_NODE_ID def_bool y depends on NUMA @@ -1848,7 +1841,7 @@ config APM_ALLOW_INTS endif # APM -source "arch/x86/kernel/cpu/cpufreq/Kconfig" +source "drivers/cpufreq/Kconfig" source "drivers/cpuidle/Kconfig" @@ -2076,7 +2069,7 @@ config OLPC depends on !X86_PAE select GPIOLIB select OF - select OF_PROMTREE if PROC_DEVICETREE + select OF_PROMTREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index d161e93..6a7cfdf 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -1,6 +1,4 @@ # Put here option for CPU selection and depending optimization -if !X86_ELAN - choice prompt "Processor family" default M686 if X86_32 @@ -203,6 +201,14 @@ config MWINCHIP3D stores for this CPU, which can increase performance of some operations. +config MELAN + bool "AMD Elan" + depends on X86_32 + ---help--- + Select this for an AMD Elan processor. + + Do not use this option for K6/Athlon/Opteron processors! + config MGEODEGX1 bool "GeodeGX1" depends on X86_32 @@ -292,8 +298,6 @@ config X86_GENERIC This is really intended for distributors who need more generic optimizations. -endif - # # Define implied options from the CPU selection here config X86_INTERNODE_CACHE_SHIFT @@ -312,7 +316,7 @@ config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || MPSC default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU - default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 + default "4" if MELAN || M486 || M386 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX config X86_XADD @@ -358,7 +362,7 @@ config X86_POPAD_OK config X86_ALIGNMENT_16 def_bool y - depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 config X86_INTEL_USERCOPY def_bool y diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu index f2ee1ab..86cee7b 100644 --- a/arch/x86/Makefile_32.cpu +++ b/arch/x86/Makefile_32.cpu @@ -37,7 +37,7 @@ cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom,$(call cc-option,-march= $(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic)) # AMD Elan support -cflags-$(CONFIG_X86_ELAN) += -march=i486 +cflags-$(CONFIG_MELAN) += -march=i486 # Geode GX1 support cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index cae3feb..db75d07 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -91,7 +91,7 @@ static int detect_memory_e801(void) if (oreg.ax > 15*1024) { return -1; /* Bogus! */ } else if (oreg.ax == 15*1024) { - boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax; + boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax; } else { /* * This ignores memory above 16MB if we have a memory diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 12e0e7d..416d865 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -183,8 +183,6 @@ static inline void disable_acpi(void) { } #define ARCH_HAS_POWER_INIT 1 -struct bootnode; - #ifdef CONFIG_ACPI_NUMA extern int acpi_numa; extern int x86_acpi_numa_init(void); diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h index a63a68b..94d420b 100644 --- a/arch/x86/include/asm/alternative-asm.h +++ b/arch/x86/include/asm/alternative-asm.h @@ -15,4 +15,13 @@ .endm #endif +.macro altinstruction_entry orig alt feature orig_len alt_len + .align 8 + .quad \orig + .quad \alt + .word \feature + .byte \orig_len + .byte \alt_len +.endm + #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 13009d1..bf535f9 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -4,7 +4,6 @@ #include <linux/types.h> #include <linux/stddef.h> #include <linux/stringify.h> -#include <linux/jump_label.h> #include <asm/asm.h> /* @@ -191,12 +190,4 @@ extern void *text_poke(void *addr, const void *opcode, size_t len); extern void *text_poke_smp(void *addr, const void *opcode, size_t len); extern void text_poke_smp_batch(struct text_poke_param *params, int n); -#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) -#define IDEAL_NOP_SIZE_5 5 -extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5]; -extern void arch_init_ideal_nop5(void); -#else -static inline void arch_init_ideal_nop5(void) {} -#endif - #endif /* _ASM_X86_ALTERNATIVE_H */ diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index 916bc81..55d95eb 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -19,13 +19,12 @@ #ifndef _ASM_X86_AMD_IOMMU_PROTO_H #define _ASM_X86_AMD_IOMMU_PROTO_H -struct amd_iommu; +#include <asm/amd_iommu_types.h> extern int amd_iommu_init_dma_ops(void); extern int amd_iommu_init_passthrough(void); +extern irqreturn_t amd_iommu_int_thread(int irq, void *data); extern irqreturn_t amd_iommu_int_handler(int irq, void *data); -extern void amd_iommu_flush_all_domains(void); -extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_apply_erratum_63(u16 devid); extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu); extern int amd_iommu_init_devices(void); @@ -44,4 +43,12 @@ static inline bool is_rd890_iommu(struct pci_dev *pdev) (pdev->device == PCI_DEVICE_ID_RD890_IOMMU); } +static inline bool iommu_feature(struct amd_iommu *iommu, u64 f) +{ + if (!(iommu->cap & (1 << IOMMU_CAP_EFR))) + return false; + + return !!(iommu->features & f); +} + #endif /* _ASM_X86_AMD_IOMMU_PROTO_H */ diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h index e3509fc..4c99829 100644 --- a/arch/x86/include/asm/amd_iommu_types.h +++ b/arch/x86/include/asm/amd_iommu_types.h @@ -68,12 +68,25 @@ #define MMIO_CONTROL_OFFSET 0x0018 #define MMIO_EXCL_BASE_OFFSET 0x0020 #define MMIO_EXCL_LIMIT_OFFSET 0x0028 +#define MMIO_EXT_FEATURES 0x0030 #define MMIO_CMD_HEAD_OFFSET 0x2000 #define MMIO_CMD_TAIL_OFFSET 0x2008 #define MMIO_EVT_HEAD_OFFSET 0x2010 #define MMIO_EVT_TAIL_OFFSET 0x2018 #define MMIO_STATUS_OFFSET 0x2020 + +/* Extended Feature Bits */ +#define FEATURE_PREFETCH (1ULL<<0) +#define FEATURE_PPR (1ULL<<1) +#define FEATURE_X2APIC (1ULL<<2) +#define FEATURE_NX (1ULL<<3) +#define FEATURE_GT (1ULL<<4) +#define FEATURE_IA (1ULL<<6) +#define FEATURE_GA (1ULL<<7) +#define FEATURE_HE (1ULL<<8) +#define FEATURE_PC (1ULL<<9) + /* MMIO status bits */ #define MMIO_STATUS_COM_WAIT_INT_MASK 0x04 @@ -113,7 +126,9 @@ /* command specific defines */ #define CMD_COMPL_WAIT 0x01 #define CMD_INV_DEV_ENTRY 0x02 -#define CMD_INV_IOMMU_PAGES 0x03 +#define CMD_INV_IOMMU_PAGES 0x03 +#define CMD_INV_IOTLB_PAGES 0x04 +#define CMD_INV_ALL 0x08 #define CMD_COMPL_WAIT_STORE_MASK 0x01 #define CMD_COMPL_WAIT_INT_MASK 0x02 @@ -215,6 +230,8 @@ #define IOMMU_PTE_IR (1ULL << 61) #define IOMMU_PTE_IW (1ULL << 62) +#define DTE_FLAG_IOTLB 0x01 + #define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL) #define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P) #define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK)) @@ -227,6 +244,7 @@ /* IOMMU capabilities */ #define IOMMU_CAP_IOTLB 24 #define IOMMU_CAP_NPCACHE 26 +#define IOMMU_CAP_EFR 27 #define MAX_DOMAIN_ID 65536 @@ -249,6 +267,8 @@ extern bool amd_iommu_dump; /* global flag if IOMMUs cache non-present entries */ extern bool amd_iommu_np_cache; +/* Only true if all IOMMUs support device IOTLBs */ +extern bool amd_iommu_iotlb_sup; /* * Make iterating over all IOMMUs easier @@ -371,6 +391,9 @@ struct amd_iommu { /* flags read from acpi table */ u8 acpi_flags; + /* Extended features */ + u64 features; + /* * Capability pointer. There could be more than one IOMMU per PCI * device function if there are more than one AMD IOMMU capability @@ -409,9 +432,6 @@ struct amd_iommu { /* if one, we need to send a completion wait command */ bool need_sync; - /* becomes true if a command buffer reset is running */ - bool reset_in_progress; - /* default dma_ops domain for that IOMMU */ struct dma_ops_domain *default_dom; diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 3316822..67f87f2 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -11,7 +11,6 @@ struct amd_nb_bus_dev_range { extern const struct pci_device_id amd_nb_misc_ids[]; extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[]; -struct bootnode; extern bool early_is_amd_nb(u32 value); extern int amd_cache_northbridges(void); diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 2b7d573..a0c46f0 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -363,7 +363,12 @@ struct apic { */ int (*x86_32_early_logical_apicid)(int cpu); - /* determine CPU -> NUMA node mapping */ + /* + * Optional method called from setup_local_APIC() after logical + * apicid is guaranteed to be known to initialize apicid -> node + * mapping if NUMA initialization hasn't done so already. Don't + * add new users. + */ int (*x86_32_numa_cpu_node)(int cpu); #endif }; @@ -537,8 +542,6 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb) return cpuid_apic >> index_msb; } -extern int default_x86_32_numa_cpu_node(int cpu); - #endif static inline unsigned int diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index d87988b..34595d5 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -78,6 +78,7 @@ #define APIC_DEST_LOGICAL 0x00800 #define APIC_DEST_PHYSICAL 0x00000 #define APIC_DM_FIXED 0x00000 +#define APIC_DM_FIXED_MASK 0x00700 #define APIC_DM_LOWEST 0x00100 #define APIC_DM_SMI 0x00200 #define APIC_DM_REMRD 0x00300 diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 91f3e087..30afb46 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -195,6 +195,7 @@ /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */ #define X86_FEATURE_FSGSBASE (9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/ +#define X86_FEATURE_ERMS (9*32+ 9) /* Enhanced REP MOVSB/STOSB */ #if defined(__KERNEL__) && !defined(__ASSEMBLY__) @@ -207,8 +208,7 @@ extern const char * const x86_power_flags[32]; #define test_cpu_cap(c, bit) \ test_bit(bit, (unsigned long *)((c)->x86_capability)) -#define cpu_has(c, bit) \ - (__builtin_constant_p(bit) && \ +#define REQUIRED_MASK_BIT_SET(bit) \ ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \ (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \ (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \ @@ -218,10 +218,16 @@ extern const char * const x86_power_flags[32]; (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \ (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) || \ (((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) || \ - (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) ) \ - ? 1 : \ + (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) ) + +#define cpu_has(c, bit) \ + (__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \ test_cpu_cap(c, bit)) +#define this_cpu_has(bit) \ + (__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \ + x86_this_cpu_test_bit(bit, (unsigned long *)&cpu_info.x86_capability)) + #define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit) #define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability)) diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h index 057099e..0bdb0c5 100644 --- a/arch/x86/include/asm/dma.h +++ b/arch/x86/include/asm/dma.h @@ -69,22 +69,18 @@ #define MAX_DMA_CHANNELS 8 -#ifdef CONFIG_X86_32 - -/* The maximum address that we can perform a DMA transfer to on this platform */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000) - -#else - /* 16MB ISA DMA zone */ #define MAX_DMA_PFN ((16 * 1024 * 1024) >> PAGE_SHIFT) /* 4GB broken PCI/AGP hardware bus master zone */ #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT) +#ifdef CONFIG_X86_32 +/* The maximum address that we can perform a DMA transfer to on this platform */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000) +#else /* Compat define for old dma zone */ #define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT)) - #endif /* 8237 DMA controllers */ diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 8e4a165..7093e4a 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -90,6 +90,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; +extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern void efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); extern void efi_call_phys_epilog(void); diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index db24c22..268c783 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -38,11 +38,10 @@ extern void mcount(void); static inline unsigned long ftrace_call_adjust(unsigned long addr) { /* - * call mcount is "e8 <4 byte offset>" - * The addr points to the 4 byte offset and the caller of this - * function wants the pointer to e8. Simply subtract one. + * addr is the address of the mcount call instruction. + * recordmcount does the necessary offset calculation. */ - return addr - 1; + return addr; } #ifdef CONFIG_DYNAMIC_FTRACE diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h index 43085bf..156cd5d 100644 --- a/arch/x86/include/asm/gart.h +++ b/arch/x86/include/asm/gart.h @@ -66,7 +66,7 @@ static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order) * Don't enable translation but enable GART IO and CPU accesses. * Also, set DISTLBWALKPRB since GART tables memory is UC. */ - ctl = DISTLBWALKPRB | order << 1; + ctl = order << 1; pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } @@ -75,17 +75,17 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) { u32 tmp, ctl; - /* address of the mappings table */ - addr >>= 12; - tmp = (u32) addr<<4; - tmp &= ~0xf; - pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); - - /* Enable GART translation for this hammer. */ - pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl |= GARTEN; - ctl &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); + /* address of the mappings table */ + addr >>= 12; + tmp = (u32) addr<<4; + tmp &= ~0xf; + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); + + /* Enable GART translation for this hammer. */ + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); + ctl |= GARTEN | DISTLBWALKPRB; + ctl &= ~(DISGARTCPU | DISGARTIO); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index ef32890..c9e09ea 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -237,7 +237,7 @@ static inline void fpu_save_init(struct fpu *fpu) } else if (use_fxsr()) { fpu_fxsave(fpu); } else { - asm volatile("fsave %[fx]; fwait" + asm volatile("fnsave %[fx]; fwait" : [fx] "=m" (fpu->state->fsave)); return; } diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h index fc1f579..65aaa91 100644 --- a/arch/x86/include/asm/i8253.h +++ b/arch/x86/include/asm/i8253.h @@ -6,6 +6,8 @@ #define PIT_CH0 0x40 #define PIT_CH2 0x42 +#define PIT_LATCH LATCH + extern raw_spinlock_t i8253_lock; extern struct clock_event_device *global_clock_event; diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index c4bd267..a97a240 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -150,7 +150,7 @@ void setup_IO_APIC_irq_extra(u32 gsi); extern void ioapic_and_gsi_init(void); extern void ioapic_insert_resources(void); -int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr); +int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h index 574dbc2..a32b18c 100644 --- a/arch/x86/include/asm/jump_label.h +++ b/arch/x86/include/asm/jump_label.h @@ -5,20 +5,25 @@ #include <linux/types.h> #include <asm/nops.h> +#include <asm/asm.h> #define JUMP_LABEL_NOP_SIZE 5 -# define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t" - -# define JUMP_LABEL(key, label) \ - do { \ - asm goto("1:" \ - JUMP_LABEL_INITIAL_NOP \ - ".pushsection __jump_table, \"aw\" \n\t"\ - _ASM_PTR "1b, %l[" #label "], %c0 \n\t" \ - ".popsection \n\t" \ - : : "i" (key) : : label); \ - } while (0) +#define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t" + +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:" + JUMP_LABEL_INITIAL_NOP + ".pushsection __jump_table, \"aw\" \n\t" + _ASM_ALIGN "\n\t" + _ASM_PTR "1b, %l[l_yes], %c0 \n\t" + ".popsection \n\t" + : : "i" (key) : : l_yes); + return false; +l_yes: + return true; +} #endif /* __KERNEL__ */ diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index eb16e94..021979a 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -142,8 +142,6 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {} static inline void enable_p5_mce(void) {} #endif -extern void (*x86_mce_decode_callback)(struct mce *m); - void mce_setup(struct mce *m); void mce_log(struct mce *m); DECLARE_PER_CPU(struct sys_device, mce_dev); diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 91df7c5..5e83a41 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -13,31 +13,11 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) #include <asm/numaq.h> -/* summit or generic arch */ -#include <asm/srat.h> - -extern int get_memcfg_numa_flat(void); -/* - * This allows any one NUMA architecture to be compiled - * for, and still fall back to the flat function if it - * fails. - */ -static inline void get_memcfg_numa(void) -{ - - if (get_memcfg_numaq()) - return; - if (get_memcfg_from_srat()) - return; - get_memcfg_numa_flat(); -} extern void resume_map_numa_kva(pgd_t *pgd); #else /* !CONFIG_NUMA */ -#define get_memcfg_numa get_memcfg_numa_flat - static inline void resume_map_numa_kva(pgd_t *pgd) {} #endif /* CONFIG_NUMA */ diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h index 288b96f..b3f88d7 100644 --- a/arch/x86/include/asm/mmzone_64.h +++ b/arch/x86/include/asm/mmzone_64.h @@ -4,36 +4,13 @@ #ifndef _ASM_X86_MMZONE_64_H #define _ASM_X86_MMZONE_64_H - #ifdef CONFIG_NUMA #include <linux/mmdebug.h> - #include <asm/smp.h> -/* Simple perfect hash to map physical addresses to node numbers */ -struct memnode { - int shift; - unsigned int mapsize; - s16 *map; - s16 embedded_map[64 - 8]; -} ____cacheline_aligned; /* total size = 128 bytes */ -extern struct memnode memnode; -#define memnode_shift memnode.shift -#define memnodemap memnode.map -#define memnodemapsize memnode.mapsize - extern struct pglist_data *node_data[]; -static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) -{ - unsigned nid; - VIRTUAL_BUG_ON(!memnodemap); - nid = memnodemap[addr >> memnode_shift]; - VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]); - return nid; -} - #define NODE_DATA(nid) (node_data[nid]) #define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h index 67763c5..9eae775 100644 --- a/arch/x86/include/asm/module.h +++ b/arch/x86/include/asm/module.h @@ -35,7 +35,7 @@ #define MODULE_PROC_FAMILY "K7 " #elif defined CONFIG_MK8 #define MODULE_PROC_FAMILY "K8 " -#elif defined CONFIG_X86_ELAN +#elif defined CONFIG_MELAN #define MODULE_PROC_FAMILY "ELAN " #elif defined CONFIG_MCRUSOE #define MODULE_PROC_FAMILY "CRUSOE " diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index fd5a1f3..3cce714 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -96,11 +96,15 @@ #define MSR_IA32_MC0_ADDR 0x00000402 #define MSR_IA32_MC0_MISC 0x00000403 +#define MSR_AMD64_MC0_MASK 0xc0010044 + #define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x)) #define MSR_IA32_MCx_STATUS(x) (MSR_IA32_MC0_STATUS + 4*(x)) #define MSR_IA32_MCx_ADDR(x) (MSR_IA32_MC0_ADDR + 4*(x)) #define MSR_IA32_MCx_MISC(x) (MSR_IA32_MC0_MISC + 4*(x)) +#define MSR_AMD64_MCx_MASK(x) (MSR_AMD64_MC0_MASK + (x)) + /* These are consecutive and not in the normal 4er MCE bank block */ #define MSR_IA32_MC0_CTL2 0x00000280 #define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x)) diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h index af78849..405b403 100644 --- a/arch/x86/include/asm/nops.h +++ b/arch/x86/include/asm/nops.h @@ -1,7 +1,13 @@ #ifndef _ASM_X86_NOPS_H #define _ASM_X86_NOPS_H -/* Define nops for use with alternative() */ +/* + * Define nops for use with alternative() and for tracing. + * + * *_NOP5_ATOMIC must be a single instruction. + */ + +#define NOP_DS_PREFIX 0x3e /* generic versions from gas 1: nop @@ -13,14 +19,15 @@ 6: leal 0x00000000(%esi),%esi 7: leal 0x00000000(,%esi,1),%esi */ -#define GENERIC_NOP1 ".byte 0x90\n" -#define GENERIC_NOP2 ".byte 0x89,0xf6\n" -#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n" -#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n" -#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4 -#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n" -#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n" -#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7 +#define GENERIC_NOP1 0x90 +#define GENERIC_NOP2 0x89,0xf6 +#define GENERIC_NOP3 0x8d,0x76,0x00 +#define GENERIC_NOP4 0x8d,0x74,0x26,0x00 +#define GENERIC_NOP5 GENERIC_NOP1,GENERIC_NOP4 +#define GENERIC_NOP6 0x8d,0xb6,0x00,0x00,0x00,0x00 +#define GENERIC_NOP7 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00 +#define GENERIC_NOP8 GENERIC_NOP1,GENERIC_NOP7 +#define GENERIC_NOP5_ATOMIC NOP_DS_PREFIX,GENERIC_NOP4 /* Opteron 64bit nops 1: nop @@ -29,13 +36,14 @@ 4: osp osp osp nop */ #define K8_NOP1 GENERIC_NOP1 -#define K8_NOP2 ".byte 0x66,0x90\n" -#define K8_NOP3 ".byte 0x66,0x66,0x90\n" -#define K8_NOP4 ".byte 0x66,0x66,0x66,0x90\n" -#define K8_NOP5 K8_NOP3 K8_NOP2 -#define K8_NOP6 K8_NOP3 K8_NOP3 -#define K8_NOP7 K8_NOP4 K8_NOP3 -#define K8_NOP8 K8_NOP4 K8_NOP4 +#define K8_NOP2 0x66,K8_NOP1 +#define K8_NOP3 0x66,K8_NOP2 +#define K8_NOP4 0x66,K8_NOP3 +#define K8_NOP5 K8_NOP3,K8_NOP2 +#define K8_NOP6 K8_NOP3,K8_NOP3 +#define K8_NOP7 K8_NOP4,K8_NOP3 +#define K8_NOP8 K8_NOP4,K8_NOP4 +#define K8_NOP5_ATOMIC 0x66,K8_NOP4 /* K7 nops uses eax dependencies (arbitrary choice) @@ -47,13 +55,14 @@ 7: leal 0x00000000(,%eax,1),%eax */ #define K7_NOP1 GENERIC_NOP1 -#define K7_NOP2 ".byte 0x8b,0xc0\n" -#define K7_NOP3 ".byte 0x8d,0x04,0x20\n" -#define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n" -#define K7_NOP5 K7_NOP4 ASM_NOP1 -#define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n" -#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n" -#define K7_NOP8 K7_NOP7 ASM_NOP1 +#define K7_NOP2 0x8b,0xc0 +#define K7_NOP3 0x8d,0x04,0x20 +#define K7_NOP4 0x8d,0x44,0x20,0x00 +#define K7_NOP5 K7_NOP4,K7_NOP1 +#define K7_NOP6 0x8d,0x80,0,0,0,0 +#define K7_NOP7 0x8D,0x04,0x05,0,0,0,0 +#define K7_NOP8 K7_NOP7,K7_NOP1 +#define K7_NOP5_ATOMIC NOP_DS_PREFIX,K7_NOP4 /* P6 nops uses eax dependencies (Intel-recommended choice) @@ -69,52 +78,65 @@ There is kernel code that depends on this. */ #define P6_NOP1 GENERIC_NOP1 -#define P6_NOP2 ".byte 0x66,0x90\n" -#define P6_NOP3 ".byte 0x0f,0x1f,0x00\n" -#define P6_NOP4 ".byte 0x0f,0x1f,0x40,0\n" -#define P6_NOP5 ".byte 0x0f,0x1f,0x44,0x00,0\n" -#define P6_NOP6 ".byte 0x66,0x0f,0x1f,0x44,0x00,0\n" -#define P6_NOP7 ".byte 0x0f,0x1f,0x80,0,0,0,0\n" -#define P6_NOP8 ".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n" +#define P6_NOP2 0x66,0x90 +#define P6_NOP3 0x0f,0x1f,0x00 +#define P6_NOP4 0x0f,0x1f,0x40,0 +#define P6_NOP5 0x0f,0x1f,0x44,0x00,0 +#define P6_NOP6 0x66,0x0f,0x1f,0x44,0x00,0 +#define P6_NOP7 0x0f,0x1f,0x80,0,0,0,0 +#define P6_NOP8 0x0f,0x1f,0x84,0x00,0,0,0,0 +#define P6_NOP5_ATOMIC P6_NOP5 + +#define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n" #if defined(CONFIG_MK7) -#define ASM_NOP1 K7_NOP1 -#define ASM_NOP2 K7_NOP2 -#define ASM_NOP3 K7_NOP3 -#define ASM_NOP4 K7_NOP4 -#define ASM_NOP5 K7_NOP5 -#define ASM_NOP6 K7_NOP6 -#define ASM_NOP7 K7_NOP7 -#define ASM_NOP8 K7_NOP8 +#define ASM_NOP1 _ASM_MK_NOP(K7_NOP1) +#define ASM_NOP2 _ASM_MK_NOP(K7_NOP2) +#define ASM_NOP3 _ASM_MK_NOP(K7_NOP3) +#define ASM_NOP4 _ASM_MK_NOP(K7_NOP4) +#define ASM_NOP5 _ASM_MK_NOP(K7_NOP5) +#define ASM_NOP6 _ASM_MK_NOP(K7_NOP6) +#define ASM_NOP7 _ASM_MK_NOP(K7_NOP7) +#define ASM_NOP8 _ASM_MK_NOP(K7_NOP8) +#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K7_NOP5_ATOMIC) #elif defined(CONFIG_X86_P6_NOP) -#define ASM_NOP1 P6_NOP1 -#define ASM_NOP2 P6_NOP2 -#define ASM_NOP3 P6_NOP3 -#define ASM_NOP4 P6_NOP4 -#define ASM_NOP5 P6_NOP5 -#define ASM_NOP6 P6_NOP6 -#define ASM_NOP7 P6_NOP7 -#define ASM_NOP8 P6_NOP8 +#define ASM_NOP1 _ASM_MK_NOP(P6_NOP1) +#define ASM_NOP2 _ASM_MK_NOP(P6_NOP2) +#define ASM_NOP3 _ASM_MK_NOP(P6_NOP3) +#define ASM_NOP4 _ASM_MK_NOP(P6_NOP4) +#define ASM_NOP5 _ASM_MK_NOP(P6_NOP5) +#define ASM_NOP6 _ASM_MK_NOP(P6_NOP6) +#define ASM_NOP7 _ASM_MK_NOP(P6_NOP7) +#define ASM_NOP8 _ASM_MK_NOP(P6_NOP8) +#define ASM_NOP5_ATOMIC _ASM_MK_NOP(P6_NOP5_ATOMIC) #elif defined(CONFIG_X86_64) -#define ASM_NOP1 K8_NOP1 -#define ASM_NOP2 K8_NOP2 -#define ASM_NOP3 K8_NOP3 -#define ASM_NOP4 K8_NOP4 -#define ASM_NOP5 K8_NOP5 -#define ASM_NOP6 K8_NOP6 -#define ASM_NOP7 K8_NOP7 -#define ASM_NOP8 K8_NOP8 +#define ASM_NOP1 _ASM_MK_NOP(K8_NOP1) +#define ASM_NOP2 _ASM_MK_NOP(K8_NOP2) +#define ASM_NOP3 _ASM_MK_NOP(K8_NOP3) +#define ASM_NOP4 _ASM_MK_NOP(K8_NOP4) +#define ASM_NOP5 _ASM_MK_NOP(K8_NOP5) +#define ASM_NOP6 _ASM_MK_NOP(K8_NOP6) +#define ASM_NOP7 _ASM_MK_NOP(K8_NOP7) +#define ASM_NOP8 _ASM_MK_NOP(K8_NOP8) +#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K8_NOP5_ATOMIC) #else -#define ASM_NOP1 GENERIC_NOP1 -#define ASM_NOP2 GENERIC_NOP2 -#define ASM_NOP3 GENERIC_NOP3 -#define ASM_NOP4 GENERIC_NOP4 -#define ASM_NOP5 GENERIC_NOP5 -#define ASM_NOP6 GENERIC_NOP6 -#define ASM_NOP7 GENERIC_NOP7 -#define ASM_NOP8 GENERIC_NOP8 +#define ASM_NOP1 _ASM_MK_NOP(GENERIC_NOP1) +#define ASM_NOP2 _ASM_MK_NOP(GENERIC_NOP2) +#define ASM_NOP3 _ASM_MK_NOP(GENERIC_NOP3) +#define ASM_NOP4 _ASM_MK_NOP(GENERIC_NOP4) +#define ASM_NOP5 _ASM_MK_NOP(GENERIC_NOP5) +#define ASM_NOP6 _ASM_MK_NOP(GENERIC_NOP6) +#define ASM_NOP7 _ASM_MK_NOP(GENERIC_NOP7) +#define ASM_NOP8 _ASM_MK_NOP(GENERIC_NOP8) +#define ASM_NOP5_ATOMIC _ASM_MK_NOP(GENERIC_NOP5_ATOMIC) #endif #define ASM_NOP_MAX 8 +#define NOP_ATOMIC5 (ASM_NOP_MAX+1) /* Entry for the 5-byte atomic NOP */ + +#ifndef __ASSEMBLY__ +extern const unsigned char * const *ideal_nops; +extern void arch_init_ideal_nops(void); +#endif #endif /* _ASM_X86_NOPS_H */ diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 3d4dab4..bfacd2c 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -1,12 +1,24 @@ #ifndef _ASM_X86_NUMA_H #define _ASM_X86_NUMA_H +#include <linux/nodemask.h> + #include <asm/topology.h> #include <asm/apicdef.h> #ifdef CONFIG_NUMA #define NR_NODE_MEMBLKS (MAX_NUMNODES*2) +#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) + +/* + * Too small node sizes may confuse the VM badly. Usually they + * result from BIOS bugs. So dont recognize nodes as standalone + * NUMA entities that have less than this amount of RAM listed: + */ +#define NODE_MIN_SIZE (4*1024*1024) + +extern int numa_off; /* * __apicid_to_node[] stores the raw mapping between physical apicid and @@ -17,15 +29,27 @@ * numa_cpu_node(). */ extern s16 __apicid_to_node[MAX_LOCAL_APIC]; +extern nodemask_t numa_nodes_parsed __initdata; + +extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); +extern void __init numa_set_distance(int from, int to, int distance); static inline void set_apicid_to_node(int apicid, s16 node) { __apicid_to_node[apicid] = node; } + +extern int __cpuinit numa_cpu_node(int cpu); + #else /* CONFIG_NUMA */ static inline void set_apicid_to_node(int apicid, s16 node) { } + +static inline int numa_cpu_node(int cpu) +{ + return NUMA_NO_NODE; +} #endif /* CONFIG_NUMA */ #ifdef CONFIG_X86_32 @@ -37,21 +61,25 @@ static inline void set_apicid_to_node(int apicid, s16 node) #ifdef CONFIG_NUMA extern void __cpuinit numa_set_node(int cpu, int node); extern void __cpuinit numa_clear_node(int cpu); -extern void __init numa_init_array(void); extern void __init init_cpu_to_node(void); extern void __cpuinit numa_add_cpu(int cpu); extern void __cpuinit numa_remove_cpu(int cpu); #else /* CONFIG_NUMA */ static inline void numa_set_node(int cpu, int node) { } static inline void numa_clear_node(int cpu) { } -static inline void numa_init_array(void) { } static inline void init_cpu_to_node(void) { } static inline void numa_add_cpu(int cpu) { } static inline void numa_remove_cpu(int cpu) { } #endif /* CONFIG_NUMA */ #ifdef CONFIG_DEBUG_PER_CPU_MAPS -struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable); +void debug_cpumask_set_cpu(int cpu, int node, bool enable); #endif +#ifdef CONFIG_NUMA_EMU +#define FAKE_NODE_MIN_SIZE ((u64)32 << 20) +#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) +void numa_emu_cmdline(char *); +#endif /* CONFIG_NUMA_EMU */ + #endif /* _ASM_X86_NUMA_H */ diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h index c6beed1..e7d6b82 100644 --- a/arch/x86/include/asm/numa_32.h +++ b/arch/x86/include/asm/numa_32.h @@ -1,16 +1,6 @@ #ifndef _ASM_X86_NUMA_32_H #define _ASM_X86_NUMA_32_H -extern int numa_off; - -extern int pxm_to_nid(int pxm); - -#ifdef CONFIG_NUMA -extern int __cpuinit numa_cpu_node(int cpu); -#else /* CONFIG_NUMA */ -static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } -#endif /* CONFIG_NUMA */ - #ifdef CONFIG_HIGHMEM extern void set_highmem_pages_init(void); #else diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 344eb17..0c05f7a 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -1,42 +1,6 @@ #ifndef _ASM_X86_NUMA_64_H #define _ASM_X86_NUMA_64_H -#include <linux/nodemask.h> - -struct bootnode { - u64 start; - u64 end; -}; - -#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) - -extern int numa_off; - extern unsigned long numa_free_all_bootmem(void); -extern void setup_node_bootmem(int nodeid, unsigned long start, - unsigned long end); - -#ifdef CONFIG_NUMA -/* - * Too small node sizes may confuse the VM badly. Usually they - * result from BIOS bugs. So dont recognize nodes as standalone - * NUMA entities that have less than this amount of RAM listed: - */ -#define NODE_MIN_SIZE (4*1024*1024) - -extern nodemask_t numa_nodes_parsed __initdata; - -extern int __cpuinit numa_cpu_node(int cpu); -extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); -extern void __init numa_set_distance(int from, int to, int distance); - -#ifdef CONFIG_NUMA_EMU -#define FAKE_NODE_MIN_SIZE ((u64)32 << 20) -#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) -void numa_emu_cmdline(char *); -#endif /* CONFIG_NUMA_EMU */ -#else -static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } -#endif #endif /* _ASM_X86_NUMA_64_H */ diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h index 37c5165..c3b3c32 100644 --- a/arch/x86/include/asm/numaq.h +++ b/arch/x86/include/asm/numaq.h @@ -29,7 +29,7 @@ #ifdef CONFIG_X86_NUMAQ extern int found_numaq; -extern int get_memcfg_numaq(void); +extern int numaq_numa_init(void); extern int pci_numaq_init(void); extern void *xquad_portio; @@ -166,11 +166,6 @@ struct sys_cfg_data { void numaq_tsc_disable(void); -#else -static inline int get_memcfg_numaq(void) -{ - return 0; -} #endif /* CONFIG_X86_NUMAQ */ #endif /* _ASM_X86_NUMAQ_H */ diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index c5d3a5a..2448771 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -26,15 +26,12 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); +extern void olpc_dt_build_devicetree(void); + #else /* !CONFIG_OLPC */ static inline void olpc_ofw_detect(void) { } static inline void setup_olpc_ofw_pgd(void) { } -#endif /* !CONFIG_OLPC */ - -#ifdef CONFIG_OF_PROMTREE -extern void olpc_dt_build_devicetree(void); -#else static inline void olpc_dt_build_devicetree(void) { } -#endif +#endif /* !CONFIG_OLPC */ #endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index d475b43..53278b0 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -517,7 +517,7 @@ do { \ typeof(o2) __o2 = o2; \ typeof(o2) __n2 = n2; \ typeof(o2) __dummy; \ - alternative_io("call this_cpu_cmpxchg16b_emu\n\t" P6_NOP4, \ + alternative_io("call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP4, \ "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \ X86_FEATURE_CX16, \ ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ @@ -542,6 +542,33 @@ do { \ old__; \ }) +static __always_inline int x86_this_cpu_constant_test_bit(unsigned int nr, + const unsigned long __percpu *addr) +{ + unsigned long __percpu *a = (unsigned long *)addr + nr / BITS_PER_LONG; + + return ((1UL << (nr % BITS_PER_LONG)) & percpu_read(*a)) != 0; +} + +static inline int x86_this_cpu_variable_test_bit(int nr, + const unsigned long __percpu *addr) +{ + int oldbit; + + asm volatile("bt "__percpu_arg(2)",%1\n\t" + "sbb %0,%0" + : "=r" (oldbit) + : "m" (*(unsigned long *)addr), "Ir" (nr)); + + return oldbit; +} + +#define x86_this_cpu_test_bit(nr, addr) \ + (__builtin_constant_p((nr)) \ + ? x86_this_cpu_constant_test_bit((nr), (addr)) \ + : x86_this_cpu_variable_test_bit((nr), (addr))) + + #include <asm-generic/percpu.h> /* We can use this directly for local CPU (faster). */ diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index 7db7723..d56187c 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -299,6 +299,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, /* Install a pte for a particular vaddr in kernel space. */ void set_pte_vaddr(unsigned long vaddr, pte_t pte); +extern void native_pagetable_reserve(u64 start, u64 end); #ifdef CONFIG_X86_32 extern void native_pagetable_setup_start(pgd_t *base); extern void native_pagetable_setup_done(pgd_t *base); diff --git a/arch/x86/include/asm/probe_roms.h b/arch/x86/include/asm/probe_roms.h new file mode 100644 index 0000000..4950a0b --- /dev/null +++ b/arch/x86/include/asm/probe_roms.h @@ -0,0 +1,8 @@ +#ifndef _PROBE_ROMS_H_ +#define _PROBE_ROMS_H_ +struct pci_dev; + +extern void __iomem *pci_map_biosrom(struct pci_dev *pdev); +extern void pci_unmap_biosrom(void __iomem *rom); +extern size_t pci_biosrom_size(struct pci_dev *pdev); +#endif diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index db8aa19..9756551 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -88,7 +88,7 @@ void *extend_brk(size_t size, size_t align); * executable.) */ #define RESERVE_BRK(name,sz) \ - static void __section(.discard.text) __used \ + static void __section(.discard.text) __used notrace \ __brk_reservation_fn_##name##__(void) { \ asm volatile ( \ ".pushsection .brk_reservation,\"aw\",@nobits;" \ @@ -104,10 +104,10 @@ void *extend_brk(size_t size, size_t align); type *name; \ RESERVE_BRK(name, sizeof(type) * entries) +extern void probe_roms(void); #ifdef __i386__ void __init i386_start_kernel(void); -extern void probe_roms(void); #else void __init x86_64_start_kernel(char *real_mode); diff --git a/arch/x86/include/asm/srat.h b/arch/x86/include/asm/srat.h deleted file mode 100644 index b508d63..0000000 --- a/arch/x86/include/asm/srat.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Some of the code in this file has been gleaned from the 64 bit - * discontigmem support code base. - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to Pat Gaughen <gone@us.ibm.com> - */ - -#ifndef _ASM_X86_SRAT_H -#define _ASM_X86_SRAT_H - -#ifdef CONFIG_ACPI_NUMA -extern int get_memcfg_from_srat(void); -#else -static inline int get_memcfg_from_srat(void) -{ - return 0; -} -#endif - -#endif /* _ASM_X86_SRAT_H */ diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index d7e89c8..70bbe39 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -37,9 +37,6 @@ print_context_stack_bp(struct thread_info *tinfo, /* Generic stack tracer with callbacks */ struct stacktrace_ops { - void (*warning)(void *data, char *msg); - /* msg must contain %s for the symbol */ - void (*warning_symbol)(void *data, char *msg, unsigned long symbol); void (*address)(void *data, unsigned long address, int reliable); /* On negative return stop dumping */ int (*stack)(void *data, char *name); diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index 12569e6..c2ff2a1 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -303,24 +303,81 @@ static inline void native_wbinvd(void) #ifdef CONFIG_PARAVIRT #include <asm/paravirt.h> #else -#define read_cr0() (native_read_cr0()) -#define write_cr0(x) (native_write_cr0(x)) -#define read_cr2() (native_read_cr2()) -#define write_cr2(x) (native_write_cr2(x)) -#define read_cr3() (native_read_cr3()) -#define write_cr3(x) (native_write_cr3(x)) -#define read_cr4() (native_read_cr4()) -#define read_cr4_safe() (native_read_cr4_safe()) -#define write_cr4(x) (native_write_cr4(x)) -#define wbinvd() (native_wbinvd()) + +static inline unsigned long read_cr0(void) +{ + return native_read_cr0(); +} + +static inline void write_cr0(unsigned long x) +{ + native_write_cr0(x); +} + +static inline unsigned long read_cr2(void) +{ + return native_read_cr2(); +} + +static inline void write_cr2(unsigned long x) +{ + native_write_cr2(x); +} + +static inline unsigned long read_cr3(void) +{ + return native_read_cr3(); +} + +static inline void write_cr3(unsigned long x) +{ + native_write_cr3(x); +} + +static inline unsigned long read_cr4(void) +{ + return native_read_cr4(); +} + +static inline unsigned long read_cr4_safe(void) +{ + return native_read_cr4_safe(); +} + +static inline void write_cr4(unsigned long x) +{ + native_write_cr4(x); +} + +static inline void wbinvd(void) +{ + native_wbinvd(); +} + #ifdef CONFIG_X86_64 -#define read_cr8() (native_read_cr8()) -#define write_cr8(x) (native_write_cr8(x)) -#define load_gs_index native_load_gs_index + +static inline unsigned long read_cr8(void) +{ + return native_read_cr8(); +} + +static inline void write_cr8(unsigned long x) +{ + native_write_cr8(x); +} + +static inline void load_gs_index(unsigned selector) +{ + native_load_gs_index(selector); +} + #endif /* Clear the 'TS' bit */ -#define clts() (native_clts()) +static inline void clts(void) +{ + native_clts(); +} #endif/* CONFIG_PARAVIRT */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 910a708..c006924 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -93,19 +93,11 @@ extern void setup_node_to_cpumask_map(void); #define pcibus_to_node(bus) __pcibus_to_node(bus) #ifdef CONFIG_X86_32 -extern unsigned long node_start_pfn[]; -extern unsigned long node_end_pfn[]; -extern unsigned long node_remap_size[]; -#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid]) - # define SD_CACHE_NICE_TRIES 1 # define SD_IDLE_IDX 1 - #else - # define SD_CACHE_NICE_TRIES 2 # define SD_IDLE_IDX 2 - #endif /* sched_domains SD_NODE_INIT for NUMA machines */ diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index abd3e0e..99f0ad7 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -42,7 +42,7 @@ * Returns 0 if the range is valid, nonzero otherwise. * * This is equivalent to the following test: - * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64) + * (u33)addr + (u33)size > (u33)current->addr_limit.seg (u65 for x86_64) * * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry... */ diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 3e094af..130f1ee 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -94,6 +94,8 @@ /* after this # consecutive successes, bump up the throttle if it was lowered */ #define COMPLETE_THRESHOLD 5 +#define UV_LB_SUBNODEID 0x10 + /* * number of entries in the destination side payload queue */ @@ -124,7 +126,7 @@ * The distribution specification (32 bytes) is interpreted as a 256-bit * distribution vector. Adjacent bits correspond to consecutive even numbered * nodeIDs. The result of adding the index of a given bit to the 15-bit - * 'base_dest_nodeid' field of the header corresponds to the + * 'base_dest_nasid' field of the header corresponds to the * destination nodeID associated with that specified bit. */ struct bau_target_uvhubmask { @@ -176,7 +178,7 @@ struct bau_msg_payload { struct bau_msg_header { unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ - unsigned int base_dest_nodeid:15; /* nasid of the */ + unsigned int base_dest_nasid:15; /* nasid of the */ /* bits 20:6 */ /* first bit in uvhub map */ unsigned int command:8; /* message type */ /* bits 28:21 */ @@ -378,6 +380,10 @@ struct ptc_stats { unsigned long d_rcanceled; /* number of messages canceled by resets */ }; +struct hub_and_pnode { + short uvhub; + short pnode; +}; /* * one per-cpu; to locate the software tables */ @@ -399,10 +405,12 @@ struct bau_control { int baudisabled; int set_bau_off; short cpu; + short osnode; short uvhub_cpu; short uvhub; short cpus_in_socket; short cpus_in_uvhub; + short partition_base_pnode; unsigned short message_number; unsigned short uvhub_quiesce; short socket_acknowledge_count[DEST_Q_SIZE]; @@ -422,15 +430,16 @@ struct bau_control { int congested_period; cycles_t period_time; long period_requests; + struct hub_and_pnode *target_hub_and_pnode; }; static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp) { return constant_test_bit(uvhub, &dstp->bits[0]); } -static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp) +static inline void bau_uvhub_set(int pnode, struct bau_target_uvhubmask *dstp) { - __set_bit(uvhub, &dstp->bits[0]); + __set_bit(pnode, &dstp->bits[0]); } static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp, int nbits) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index a501741..4298002 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -398,6 +398,8 @@ struct uv_blade_info { unsigned short nr_online_cpus; unsigned short pnode; short memory_nid; + spinlock_t nmi_lock; + unsigned long nmi_count; }; extern struct uv_blade_info *uv_blade_info; extern short *uv_node_to_blade; diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 20cafea..f5bb64a 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -5,7 +5,7 @@ * * SGI UV MMR definitions * - * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2011 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_MMRS_H @@ -1099,5 +1099,19 @@ union uvh_rtc1_int_config_u { } s; }; +/* ========================================================================= */ +/* UVH_SCRATCH5 */ +/* ========================================================================= */ +#define UVH_SCRATCH5 0x2d0200UL +#define UVH_SCRATCH5_32 0x00778 + +#define UVH_SCRATCH5_SCRATCH5_SHFT 0 +#define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL +union uvh_scratch5_u { + unsigned long v; + struct uvh_scratch5_s { + unsigned long scratch5 : 64; /* RW, W1CS */ + } s; +}; #endif /* __ASM_UV_MMRS_X86_H__ */ diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 643ebf2..d3d8590 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -68,6 +68,17 @@ struct x86_init_oem { }; /** + * struct x86_init_mapping - platform specific initial kernel pagetable setup + * @pagetable_reserve: reserve a range of addresses for kernel pagetable usage + * + * For more details on the purpose of this hook, look in + * init_memory_mapping and the commit that added it. + */ +struct x86_init_mapping { + void (*pagetable_reserve)(u64 start, u64 end); +}; + +/** * struct x86_init_paging - platform specific paging functions * @pagetable_setup_start: platform specific pre paging_init() call * @pagetable_setup_done: platform specific post paging_init() call @@ -123,6 +134,7 @@ struct x86_init_ops { struct x86_init_mpparse mpparse; struct x86_init_irqs irqs; struct x86_init_oem oem; + struct x86_init_mapping mapping; struct x86_init_paging paging; struct x86_init_timers timers; struct x86_init_iommu iommu; diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index c61934f..64a619d 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -47,8 +47,9 @@ extern bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); extern unsigned long set_phys_range_identity(unsigned long pfn_s, unsigned long pfn_e); -extern int m2p_add_override(unsigned long mfn, struct page *page); -extern int m2p_remove_override(struct page *page); +extern int m2p_add_override(unsigned long mfn, struct page *page, + bool clear_pte); +extern int m2p_remove_override(struct page *page, bool clear_pte); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h index aa86209..4fbda9a 100644 --- a/arch/x86/include/asm/xen/pci.h +++ b/arch/x86/include/asm/xen/pci.h @@ -15,10 +15,26 @@ static inline int pci_xen_hvm_init(void) #endif #if defined(CONFIG_XEN_DOM0) void __init xen_setup_pirqs(void); +int xen_find_device_domain_owner(struct pci_dev *dev); +int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); +int xen_unregister_device_domain_owner(struct pci_dev *dev); #else static inline void __init xen_setup_pirqs(void) { } +static inline int xen_find_device_domain_owner(struct pci_dev *dev) +{ + return -1; +} +static inline int xen_register_device_domain_owner(struct pci_dev *dev, + uint16_t domain) +{ + return -1; +} +static inline int xen_unregister_device_domain_owner(struct pci_dev *dev) +{ + return -1; +} #endif #if defined(CONFIG_PCI_MSI) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 7338ef2..2508064 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -36,7 +36,7 @@ obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o obj-$(CONFIG_IRQ_WORK) += irq_work.o -obj-$(CONFIG_X86_32) += probe_roms_32.o +obj-y += probe_roms.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o @@ -117,7 +117,7 @@ obj-$(CONFIG_OF) += devicetree.o ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_AUDIT) += audit_64.o - obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o + obj-$(CONFIG_GART_IOMMU) += amd_gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_AMD_IOMMU) += amd_iommu_init.o amd_iommu.o diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index ff93bc1..18a857b 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -112,11 +112,6 @@ static int __init acpi_sleep_setup(char *str) #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature(); - if (strncmp(str, "s4_nonvs", 8) == 0) { - pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, " - "please use acpi_sleep=nonvs instead"); - acpi_nvs_nosave(); - } #endif if (strncmp(str, "nonvs", 5) == 0) acpi_nvs_nosave(); diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 4a23467..a81f2d5 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -67,17 +67,30 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt); #define DPRINTK(fmt, args...) if (debug_alternative) \ printk(KERN_DEBUG fmt, args) +/* + * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes + * that correspond to that nop. Getting from one nop to the next, we + * add to the array the offset that is equal to the sum of all sizes of + * nops preceding the one we are after. + * + * Note: The GENERIC_NOP5_ATOMIC is at the end, as it breaks the + * nice symmetry of sizes of the previous nops. + */ #if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64) -/* Use inline assembly to define this because the nops are defined - as inline assembly strings in the include files and we cannot - get them easily into strings. */ -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: " - GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 - GENERIC_NOP7 GENERIC_NOP8 - "\t.previous"); -extern const unsigned char intelnops[]; -static const unsigned char *const __initconst_or_module -intel_nops[ASM_NOP_MAX+1] = { +static const unsigned char intelnops[] = +{ + GENERIC_NOP1, + GENERIC_NOP2, + GENERIC_NOP3, + GENERIC_NOP4, + GENERIC_NOP5, + GENERIC_NOP6, + GENERIC_NOP7, + GENERIC_NOP8, + GENERIC_NOP5_ATOMIC +}; +static const unsigned char * const intel_nops[ASM_NOP_MAX+2] = +{ NULL, intelnops, intelnops + 1, @@ -87,17 +100,25 @@ intel_nops[ASM_NOP_MAX+1] = { intelnops + 1 + 2 + 3 + 4 + 5, intelnops + 1 + 2 + 3 + 4 + 5 + 6, intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #ifdef K8_NOP1 -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: " - K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8 - "\t.previous"); -extern const unsigned char k8nops[]; -static const unsigned char *const __initconst_or_module -k8_nops[ASM_NOP_MAX+1] = { +static const unsigned char k8nops[] = +{ + K8_NOP1, + K8_NOP2, + K8_NOP3, + K8_NOP4, + K8_NOP5, + K8_NOP6, + K8_NOP7, + K8_NOP8, + K8_NOP5_ATOMIC +}; +static const unsigned char * const k8_nops[ASM_NOP_MAX+2] = +{ NULL, k8nops, k8nops + 1, @@ -107,17 +128,25 @@ k8_nops[ASM_NOP_MAX+1] = { k8nops + 1 + 2 + 3 + 4 + 5, k8nops + 1 + 2 + 3 + 4 + 5 + 6, k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #if defined(K7_NOP1) && !defined(CONFIG_X86_64) -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: " - K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8 - "\t.previous"); -extern const unsigned char k7nops[]; -static const unsigned char *const __initconst_or_module -k7_nops[ASM_NOP_MAX+1] = { +static const unsigned char k7nops[] = +{ + K7_NOP1, + K7_NOP2, + K7_NOP3, + K7_NOP4, + K7_NOP5, + K7_NOP6, + K7_NOP7, + K7_NOP8, + K7_NOP5_ATOMIC +}; +static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = +{ NULL, k7nops, k7nops + 1, @@ -127,17 +156,25 @@ k7_nops[ASM_NOP_MAX+1] = { k7nops + 1 + 2 + 3 + 4 + 5, k7nops + 1 + 2 + 3 + 4 + 5 + 6, k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #ifdef P6_NOP1 -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: " - P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6 - P6_NOP7 P6_NOP8 - "\t.previous"); -extern const unsigned char p6nops[]; -static const unsigned char *const __initconst_or_module -p6_nops[ASM_NOP_MAX+1] = { +static const unsigned char __initconst_or_module p6nops[] = +{ + P6_NOP1, + P6_NOP2, + P6_NOP3, + P6_NOP4, + P6_NOP5, + P6_NOP6, + P6_NOP7, + P6_NOP8, + P6_NOP5_ATOMIC +}; +static const unsigned char * const p6_nops[ASM_NOP_MAX+2] = +{ NULL, p6nops, p6nops + 1, @@ -147,47 +184,65 @@ p6_nops[ASM_NOP_MAX+1] = { p6nops + 1 + 2 + 3 + 4 + 5, p6nops + 1 + 2 + 3 + 4 + 5 + 6, p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif +/* Initialize these to a safe default */ #ifdef CONFIG_X86_64 +const unsigned char * const *ideal_nops = p6_nops; +#else +const unsigned char * const *ideal_nops = intel_nops; +#endif -extern char __vsyscall_0; -static const unsigned char *const *__init_or_module find_nop_table(void) +void __init arch_init_ideal_nops(void) { - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - boot_cpu_has(X86_FEATURE_NOPL)) - return p6_nops; - else - return k8_nops; -} - -#else /* CONFIG_X86_64 */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + /* + * Due to a decoder implementation quirk, some + * specific Intel CPUs actually perform better with + * the "k8_nops" than with the SDM-recommended NOPs. + */ + if (boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model >= 0x0f && + boot_cpu_data.x86_model != 0x1c && + boot_cpu_data.x86_model != 0x26 && + boot_cpu_data.x86_model != 0x27 && + boot_cpu_data.x86_model < 0x30) { + ideal_nops = k8_nops; + } else if (boot_cpu_has(X86_FEATURE_NOPL)) { + ideal_nops = p6_nops; + } else { +#ifdef CONFIG_X86_64 + ideal_nops = k8_nops; +#else + ideal_nops = intel_nops; +#endif + } -static const unsigned char *const *__init_or_module find_nop_table(void) -{ - if (boot_cpu_has(X86_FEATURE_K8)) - return k8_nops; - else if (boot_cpu_has(X86_FEATURE_K7)) - return k7_nops; - else if (boot_cpu_has(X86_FEATURE_NOPL)) - return p6_nops; - else - return intel_nops; + default: +#ifdef CONFIG_X86_64 + ideal_nops = k8_nops; +#else + if (boot_cpu_has(X86_FEATURE_K8)) + ideal_nops = k8_nops; + else if (boot_cpu_has(X86_FEATURE_K7)) + ideal_nops = k7_nops; + else + ideal_nops = intel_nops; +#endif + } } -#endif /* CONFIG_X86_64 */ - /* Use this to add nops to a buffer, then text_poke the whole buffer. */ static void __init_or_module add_nops(void *insns, unsigned int len) { - const unsigned char *const *noptable = find_nop_table(); - while (len > 0) { unsigned int noplen = len; if (noplen > ASM_NOP_MAX) noplen = ASM_NOP_MAX; - memcpy(insns, noptable[noplen], noplen); + memcpy(insns, ideal_nops[noplen], noplen); insns += noplen; len -= noplen; } @@ -195,6 +250,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len) extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; extern s32 __smp_locks[], __smp_locks_end[]; +extern char __vsyscall_0; void *text_poke_early(void *addr, const void *opcode, size_t len); /* Replace instructions with better alternatives for this CPU type. @@ -210,6 +266,15 @@ void __init_or_module apply_alternatives(struct alt_instr *start, u8 insnbuf[MAX_PATCH_LEN]; DPRINTK("%s: alt table %p -> %p\n", __func__, start, end); + /* + * The scan order should be from start to end. A later scanned + * alternative code can overwrite a previous scanned alternative code. + * Some kernel functions (e.g. memcpy, memset, etc) use this order to + * patch code. + * + * So be careful if you want to change the scan order to any other + * order. + */ for (a = start; a < end; a++) { u8 *instr = a->instr; BUG_ON(a->replacementlen > a->instrlen); @@ -678,29 +743,3 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) wrote_text = 0; __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); } - -#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) - -#ifdef CONFIG_X86_64 -unsigned char ideal_nop5[5] = { 0x66, 0x66, 0x66, 0x66, 0x90 }; -#else -unsigned char ideal_nop5[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 }; -#endif - -void __init arch_init_ideal_nop5(void) -{ - /* - * There is no good nop for all x86 archs. This selection - * algorithm should be unified with the one in find_nop_table(), - * but this should be good enough for now. - * - * For cases other than the ones below, use the safe (as in - * always functional) defaults above. - */ -#ifdef CONFIG_X86_64 - /* Don't use these on 32 bits due to broken virtualizers */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - memcpy(ideal_nop5, p6_nops[5], 5); -#endif -} -#endif diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/amd_gart_64.c index 82ada01..b117efd 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -81,6 +81,9 @@ static u32 gart_unmapped_entry; #define AGPEXTERN #endif +/* GART can only remap to physical addresses < 1TB */ +#define GART_MAX_PHYS_ADDR (1ULL << 40) + /* backdoor interface to AGP driver */ AGPEXTERN int agp_memory_reserved; AGPEXTERN __u32 *agp_gatt_table; @@ -212,9 +215,13 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, size_t size, int dir, unsigned long align_mask) { unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE); - unsigned long iommu_page = alloc_iommu(dev, npages, align_mask); + unsigned long iommu_page; int i; + if (unlikely(phys_mem + size > GART_MAX_PHYS_ADDR)) + return bad_dma_addr; + + iommu_page = alloc_iommu(dev, npages, align_mask); if (iommu_page == -1) { if (!nonforced_iommu(dev, phys_mem, size)) return phys_mem; diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 57ca777..873e7e1 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -18,6 +18,7 @@ */ #include <linux/pci.h> +#include <linux/pci-ats.h> #include <linux/bitmap.h> #include <linux/slab.h> #include <linux/debugfs.h> @@ -25,6 +26,7 @@ #include <linux/dma-mapping.h> #include <linux/iommu-helper.h> #include <linux/iommu.h> +#include <linux/delay.h> #include <asm/proto.h> #include <asm/iommu.h> #include <asm/gart.h> @@ -34,7 +36,7 @@ #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28)) -#define EXIT_LOOP_COUNT 10000000 +#define LOOP_TIMEOUT 100000 static DEFINE_RWLOCK(amd_iommu_devtable_lock); @@ -57,7 +59,6 @@ struct iommu_cmd { u32 data[4]; }; -static void reset_iommu_command_buffer(struct amd_iommu *iommu); static void update_domain(struct protection_domain *domain); /**************************************************************************** @@ -322,8 +323,6 @@ static void iommu_print_event(struct amd_iommu *iommu, void *__evt) break; case EVENT_TYPE_ILL_CMD: printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address); - iommu->reset_in_progress = true; - reset_iommu_command_buffer(iommu); dump_command(address); break; case EVENT_TYPE_CMD_HARD_ERR: @@ -367,7 +366,7 @@ static void iommu_poll_events(struct amd_iommu *iommu) spin_unlock_irqrestore(&iommu->lock, flags); } -irqreturn_t amd_iommu_int_handler(int irq, void *data) +irqreturn_t amd_iommu_int_thread(int irq, void *data) { struct amd_iommu *iommu; @@ -377,192 +376,300 @@ irqreturn_t amd_iommu_int_handler(int irq, void *data) return IRQ_HANDLED; } +irqreturn_t amd_iommu_int_handler(int irq, void *data) +{ + return IRQ_WAKE_THREAD; +} + /**************************************************************************** * * IOMMU command queuing functions * ****************************************************************************/ -/* - * Writes the command to the IOMMUs command buffer and informs the - * hardware about the new command. Must be called with iommu->lock held. - */ -static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +static int wait_on_sem(volatile u64 *sem) +{ + int i = 0; + + while (*sem == 0 && i < LOOP_TIMEOUT) { + udelay(1); + i += 1; + } + + if (i == LOOP_TIMEOUT) { + pr_alert("AMD-Vi: Completion-Wait loop timed out\n"); + return -EIO; + } + + return 0; +} + +static void copy_cmd_to_buffer(struct amd_iommu *iommu, + struct iommu_cmd *cmd, + u32 tail) { - u32 tail, head; u8 *target; - WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED); - tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); target = iommu->cmd_buf + tail; - memcpy_toio(target, cmd, sizeof(*cmd)); - tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; - head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); - if (tail == head) - return -ENOMEM; + tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; + + /* Copy command to buffer */ + memcpy(target, cmd, sizeof(*cmd)); + + /* Tell the IOMMU about it */ writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); +} - return 0; +static void build_completion_wait(struct iommu_cmd *cmd, u64 address) +{ + WARN_ON(address & 0x7ULL); + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = lower_32_bits(__pa(address)) | CMD_COMPL_WAIT_STORE_MASK; + cmd->data[1] = upper_32_bits(__pa(address)); + cmd->data[2] = 1; + CMD_SET_TYPE(cmd, CMD_COMPL_WAIT); +} + +static void build_inv_dte(struct iommu_cmd *cmd, u16 devid) +{ + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = devid; + CMD_SET_TYPE(cmd, CMD_INV_DEV_ENTRY); +} + +static void build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address, + size_t size, u16 domid, int pde) +{ + u64 pages; + int s; + + pages = iommu_num_pages(address, size, PAGE_SIZE); + s = 0; + + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; + } + + address &= PAGE_MASK; + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[1] |= domid; + cmd->data[2] = lower_32_bits(address); + cmd->data[3] = upper_32_bits(address); + CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES); + if (s) /* size bit - we flush more than one 4kb page */ + cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; + if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ + cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; +} + +static void build_inv_iotlb_pages(struct iommu_cmd *cmd, u16 devid, int qdep, + u64 address, size_t size) +{ + u64 pages; + int s; + + pages = iommu_num_pages(address, size, PAGE_SIZE); + s = 0; + + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; + } + + address &= PAGE_MASK; + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = devid; + cmd->data[0] |= (qdep & 0xff) << 24; + cmd->data[1] = devid; + cmd->data[2] = lower_32_bits(address); + cmd->data[3] = upper_32_bits(address); + CMD_SET_TYPE(cmd, CMD_INV_IOTLB_PAGES); + if (s) + cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; +} + +static void build_inv_all(struct iommu_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + CMD_SET_TYPE(cmd, CMD_INV_ALL); } /* - * General queuing function for commands. Takes iommu->lock and calls - * __iommu_queue_command(). + * Writes the command to the IOMMUs command buffer and informs the + * hardware about the new command. */ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) { + u32 left, tail, head, next_tail; unsigned long flags; - int ret; + WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED); + +again: spin_lock_irqsave(&iommu->lock, flags); - ret = __iommu_queue_command(iommu, cmd); - if (!ret) - iommu->need_sync = true; - spin_unlock_irqrestore(&iommu->lock, flags); - return ret; -} + head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); + tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + next_tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; + left = (head - next_tail) % iommu->cmd_buf_size; -/* - * This function waits until an IOMMU has completed a completion - * wait command - */ -static void __iommu_wait_for_completion(struct amd_iommu *iommu) -{ - int ready = 0; - unsigned status = 0; - unsigned long i = 0; + if (left <= 2) { + struct iommu_cmd sync_cmd; + volatile u64 sem = 0; + int ret; - INC_STATS_COUNTER(compl_wait); + build_completion_wait(&sync_cmd, (u64)&sem); + copy_cmd_to_buffer(iommu, &sync_cmd, tail); - while (!ready && (i < EXIT_LOOP_COUNT)) { - ++i; - /* wait for the bit to become one */ - status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET); - ready = status & MMIO_STATUS_COM_WAIT_INT_MASK; + spin_unlock_irqrestore(&iommu->lock, flags); + + if ((ret = wait_on_sem(&sem)) != 0) + return ret; + + goto again; } - /* set bit back to zero */ - status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; - writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); + copy_cmd_to_buffer(iommu, cmd, tail); + + /* We need to sync now to make sure all commands are processed */ + iommu->need_sync = true; + + spin_unlock_irqrestore(&iommu->lock, flags); - if (unlikely(i == EXIT_LOOP_COUNT)) - iommu->reset_in_progress = true; + return 0; } /* * This function queues a completion wait command into the command * buffer of an IOMMU */ -static int __iommu_completion_wait(struct amd_iommu *iommu) +static int iommu_completion_wait(struct amd_iommu *iommu) { struct iommu_cmd cmd; + volatile u64 sem = 0; + int ret; - memset(&cmd, 0, sizeof(cmd)); - cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; - CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT); + if (!iommu->need_sync) + return 0; - return __iommu_queue_command(iommu, &cmd); + build_completion_wait(&cmd, (u64)&sem); + + ret = iommu_queue_command(iommu, &cmd); + if (ret) + return ret; + + return wait_on_sem(&sem); } -/* - * This function is called whenever we need to ensure that the IOMMU has - * completed execution of all commands we sent. It sends a - * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs - * us about that by writing a value to a physical address we pass with - * the command. - */ -static int iommu_completion_wait(struct amd_iommu *iommu) +static int iommu_flush_dte(struct amd_iommu *iommu, u16 devid) { - int ret = 0; - unsigned long flags; + struct iommu_cmd cmd; - spin_lock_irqsave(&iommu->lock, flags); + build_inv_dte(&cmd, devid); - if (!iommu->need_sync) - goto out; + return iommu_queue_command(iommu, &cmd); +} - ret = __iommu_completion_wait(iommu); +static void iommu_flush_dte_all(struct amd_iommu *iommu) +{ + u32 devid; - iommu->need_sync = false; + for (devid = 0; devid <= 0xffff; ++devid) + iommu_flush_dte(iommu, devid); - if (ret) - goto out; - - __iommu_wait_for_completion(iommu); + iommu_completion_wait(iommu); +} -out: - spin_unlock_irqrestore(&iommu->lock, flags); +/* + * This function uses heavy locking and may disable irqs for some time. But + * this is no issue because it is only called during resume. + */ +static void iommu_flush_tlb_all(struct amd_iommu *iommu) +{ + u32 dom_id; - if (iommu->reset_in_progress) - reset_iommu_command_buffer(iommu); + for (dom_id = 0; dom_id <= 0xffff; ++dom_id) { + struct iommu_cmd cmd; + build_inv_iommu_pages(&cmd, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, + dom_id, 1); + iommu_queue_command(iommu, &cmd); + } - return 0; + iommu_completion_wait(iommu); } -static void iommu_flush_complete(struct protection_domain *domain) +static void iommu_flush_all(struct amd_iommu *iommu) { - int i; + struct iommu_cmd cmd; - for (i = 0; i < amd_iommus_present; ++i) { - if (!domain->dev_iommu[i]) - continue; + build_inv_all(&cmd); - /* - * Devices of this domain are behind this IOMMU - * We need to wait for completion of all commands. - */ - iommu_completion_wait(amd_iommus[i]); + iommu_queue_command(iommu, &cmd); + iommu_completion_wait(iommu); +} + +void iommu_flush_all_caches(struct amd_iommu *iommu) +{ + if (iommu_feature(iommu, FEATURE_IA)) { + iommu_flush_all(iommu); + } else { + iommu_flush_dte_all(iommu); + iommu_flush_tlb_all(iommu); } } /* - * Command send function for invalidating a device table entry + * Command send function for flushing on-device TLB */ -static int iommu_flush_device(struct device *dev) +static int device_flush_iotlb(struct device *dev, u64 address, size_t size) { + struct pci_dev *pdev = to_pci_dev(dev); struct amd_iommu *iommu; struct iommu_cmd cmd; u16 devid; + int qdep; + qdep = pci_ats_queue_depth(pdev); devid = get_device_id(dev); iommu = amd_iommu_rlookup_table[devid]; - /* Build command */ - memset(&cmd, 0, sizeof(cmd)); - CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); - cmd.data[0] = devid; + build_inv_iotlb_pages(&cmd, devid, qdep, address, size); return iommu_queue_command(iommu, &cmd); } -static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address, - u16 domid, int pde, int s) -{ - memset(cmd, 0, sizeof(*cmd)); - address &= PAGE_MASK; - CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES); - cmd->data[1] |= domid; - cmd->data[2] = lower_32_bits(address); - cmd->data[3] = upper_32_bits(address); - if (s) /* size bit - we flush more than one 4kb page */ - cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; - if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ - cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; -} - /* - * Generic command send function for invalidaing TLB entries + * Command send function for invalidating a device table entry */ -static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, - u64 address, u16 domid, int pde, int s) +static int device_flush_dte(struct device *dev) { - struct iommu_cmd cmd; + struct amd_iommu *iommu; + struct pci_dev *pdev; + u16 devid; int ret; - __iommu_build_inv_iommu_pages(&cmd, address, domid, pde, s); + pdev = to_pci_dev(dev); + devid = get_device_id(dev); + iommu = amd_iommu_rlookup_table[devid]; - ret = iommu_queue_command(iommu, &cmd); + ret = iommu_flush_dte(iommu, devid); + if (ret) + return ret; + + if (pci_ats_enabled(pdev)) + ret = device_flush_iotlb(dev, 0, ~0UL); return ret; } @@ -572,23 +679,14 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, * It invalidates a single PTE if the range to flush is within a single * page. Otherwise it flushes the whole TLB of the IOMMU. */ -static void __iommu_flush_pages(struct protection_domain *domain, - u64 address, size_t size, int pde) +static void __domain_flush_pages(struct protection_domain *domain, + u64 address, size_t size, int pde) { - int s = 0, i; - unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE); - - address &= PAGE_MASK; - - if (pages > 1) { - /* - * If we have to flush more than one page, flush all - * TLB entries for this domain - */ - address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; - s = 1; - } + struct iommu_dev_data *dev_data; + struct iommu_cmd cmd; + int ret = 0, i; + build_inv_iommu_pages(&cmd, address, size, domain->id, pde); for (i = 0; i < amd_iommus_present; ++i) { if (!domain->dev_iommu[i]) @@ -598,101 +696,70 @@ static void __iommu_flush_pages(struct protection_domain *domain, * Devices of this domain are behind this IOMMU * We need a TLB flush */ - iommu_queue_inv_iommu_pages(amd_iommus[i], address, - domain->id, pde, s); + ret |= iommu_queue_command(amd_iommus[i], &cmd); + } + + list_for_each_entry(dev_data, &domain->dev_list, list) { + struct pci_dev *pdev = to_pci_dev(dev_data->dev); + + if (!pci_ats_enabled(pdev)) + continue; + + ret |= device_flush_iotlb(dev_data->dev, address, size); } - return; + WARN_ON(ret); } -static void iommu_flush_pages(struct protection_domain *domain, - u64 address, size_t size) +static void domain_flush_pages(struct protection_domain *domain, + u64 address, size_t size) { - __iommu_flush_pages(domain, address, size, 0); + __domain_flush_pages(domain, address, size, 0); } /* Flush the whole IO/TLB for a given protection domain */ -static void iommu_flush_tlb(struct protection_domain *domain) +static void domain_flush_tlb(struct protection_domain *domain) { - __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0); + __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0); } /* Flush the whole IO/TLB for a given protection domain - including PDE */ -static void iommu_flush_tlb_pde(struct protection_domain *domain) +static void domain_flush_tlb_pde(struct protection_domain *domain) { - __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1); -} - - -/* - * This function flushes the DTEs for all devices in domain - */ -static void iommu_flush_domain_devices(struct protection_domain *domain) -{ - struct iommu_dev_data *dev_data; - unsigned long flags; - - spin_lock_irqsave(&domain->lock, flags); - - list_for_each_entry(dev_data, &domain->dev_list, list) - iommu_flush_device(dev_data->dev); - - spin_unlock_irqrestore(&domain->lock, flags); + __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1); } -static void iommu_flush_all_domain_devices(void) +static void domain_flush_complete(struct protection_domain *domain) { - struct protection_domain *domain; - unsigned long flags; + int i; - spin_lock_irqsave(&amd_iommu_pd_lock, flags); + for (i = 0; i < amd_iommus_present; ++i) { + if (!domain->dev_iommu[i]) + continue; - list_for_each_entry(domain, &amd_iommu_pd_list, list) { - iommu_flush_domain_devices(domain); - iommu_flush_complete(domain); + /* + * Devices of this domain are behind this IOMMU + * We need to wait for completion of all commands. + */ + iommu_completion_wait(amd_iommus[i]); } - - spin_unlock_irqrestore(&amd_iommu_pd_lock, flags); } -void amd_iommu_flush_all_devices(void) -{ - iommu_flush_all_domain_devices(); -} /* - * This function uses heavy locking and may disable irqs for some time. But - * this is no issue because it is only called during resume. + * This function flushes the DTEs for all devices in domain */ -void amd_iommu_flush_all_domains(void) +static void domain_flush_devices(struct protection_domain *domain) { - struct protection_domain *domain; + struct iommu_dev_data *dev_data; unsigned long flags; - spin_lock_irqsave(&amd_iommu_pd_lock, flags); - - list_for_each_entry(domain, &amd_iommu_pd_list, list) { - spin_lock(&domain->lock); - iommu_flush_tlb_pde(domain); - iommu_flush_complete(domain); - spin_unlock(&domain->lock); - } - - spin_unlock_irqrestore(&amd_iommu_pd_lock, flags); -} - -static void reset_iommu_command_buffer(struct amd_iommu *iommu) -{ - pr_err("AMD-Vi: Resetting IOMMU command buffer\n"); - - if (iommu->reset_in_progress) - panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n"); + spin_lock_irqsave(&domain->lock, flags); - amd_iommu_reset_cmd_buffer(iommu); - amd_iommu_flush_all_devices(); - amd_iommu_flush_all_domains(); + list_for_each_entry(dev_data, &domain->dev_list, list) + device_flush_dte(dev_data->dev); - iommu->reset_in_progress = false; + spin_unlock_irqrestore(&domain->lock, flags); } /**************************************************************************** @@ -1410,17 +1477,22 @@ static bool dma_ops_domain(struct protection_domain *domain) return domain->flags & PD_DMA_OPS_MASK; } -static void set_dte_entry(u16 devid, struct protection_domain *domain) +static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats) { u64 pte_root = virt_to_phys(domain->pt_root); + u32 flags = 0; pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK) << DEV_ENTRY_MODE_SHIFT; pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV; - amd_iommu_dev_table[devid].data[2] = domain->id; - amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root); - amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root); + if (ats) + flags |= DTE_FLAG_IOTLB; + + amd_iommu_dev_table[devid].data[3] |= flags; + amd_iommu_dev_table[devid].data[2] = domain->id; + amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root); + amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root); } static void clear_dte_entry(u16 devid) @@ -1437,34 +1509,42 @@ static void do_attach(struct device *dev, struct protection_domain *domain) { struct iommu_dev_data *dev_data; struct amd_iommu *iommu; + struct pci_dev *pdev; + bool ats = false; u16 devid; devid = get_device_id(dev); iommu = amd_iommu_rlookup_table[devid]; dev_data = get_dev_data(dev); + pdev = to_pci_dev(dev); + + if (amd_iommu_iotlb_sup) + ats = pci_ats_enabled(pdev); /* Update data structures */ dev_data->domain = domain; list_add(&dev_data->list, &domain->dev_list); - set_dte_entry(devid, domain); + set_dte_entry(devid, domain, ats); /* Do reference counting */ domain->dev_iommu[iommu->index] += 1; domain->dev_cnt += 1; /* Flush the DTE entry */ - iommu_flush_device(dev); + device_flush_dte(dev); } static void do_detach(struct device *dev) { struct iommu_dev_data *dev_data; struct amd_iommu *iommu; + struct pci_dev *pdev; u16 devid; devid = get_device_id(dev); iommu = amd_iommu_rlookup_table[devid]; dev_data = get_dev_data(dev); + pdev = to_pci_dev(dev); /* decrease reference counters */ dev_data->domain->dev_iommu[iommu->index] -= 1; @@ -1476,7 +1556,7 @@ static void do_detach(struct device *dev) clear_dte_entry(devid); /* Flush the DTE entry */ - iommu_flush_device(dev); + device_flush_dte(dev); } /* @@ -1539,9 +1619,13 @@ out_unlock: static int attach_device(struct device *dev, struct protection_domain *domain) { + struct pci_dev *pdev = to_pci_dev(dev); unsigned long flags; int ret; + if (amd_iommu_iotlb_sup) + pci_enable_ats(pdev, PAGE_SHIFT); + write_lock_irqsave(&amd_iommu_devtable_lock, flags); ret = __attach_device(dev, domain); write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); @@ -1551,7 +1635,7 @@ static int attach_device(struct device *dev, * left the caches in the IOMMU dirty. So we have to flush * here to evict all dirty stuff. */ - iommu_flush_tlb_pde(domain); + domain_flush_tlb_pde(domain); return ret; } @@ -1598,12 +1682,16 @@ static void __detach_device(struct device *dev) */ static void detach_device(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); unsigned long flags; /* lock device table */ write_lock_irqsave(&amd_iommu_devtable_lock, flags); __detach_device(dev); write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + + if (amd_iommu_iotlb_sup && pci_ats_enabled(pdev)) + pci_disable_ats(pdev); } /* @@ -1692,7 +1780,7 @@ static int device_change_notifier(struct notifier_block *nb, goto out; } - iommu_flush_device(dev); + device_flush_dte(dev); iommu_completion_wait(iommu); out: @@ -1753,8 +1841,9 @@ static void update_device_table(struct protection_domain *domain) struct iommu_dev_data *dev_data; list_for_each_entry(dev_data, &domain->dev_list, list) { + struct pci_dev *pdev = to_pci_dev(dev_data->dev); u16 devid = get_device_id(dev_data->dev); - set_dte_entry(devid, domain); + set_dte_entry(devid, domain, pci_ats_enabled(pdev)); } } @@ -1764,8 +1853,9 @@ static void update_domain(struct protection_domain *domain) return; update_device_table(domain); - iommu_flush_domain_devices(domain); - iommu_flush_tlb_pde(domain); + + domain_flush_devices(domain); + domain_flush_tlb_pde(domain); domain->updated = false; } @@ -1924,10 +2014,10 @@ retry: ADD_STATS_COUNTER(alloced_io_mem, size); if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) { - iommu_flush_tlb(&dma_dom->domain); + domain_flush_tlb(&dma_dom->domain); dma_dom->need_flush = false; } else if (unlikely(amd_iommu_np_cache)) - iommu_flush_pages(&dma_dom->domain, address, size); + domain_flush_pages(&dma_dom->domain, address, size); out: return address; @@ -1976,7 +2066,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom, dma_ops_free_addresses(dma_dom, dma_addr, pages); if (amd_iommu_unmap_flush || dma_dom->need_flush) { - iommu_flush_pages(&dma_dom->domain, flush_addr, size); + domain_flush_pages(&dma_dom->domain, flush_addr, size); dma_dom->need_flush = false; } } @@ -2012,7 +2102,7 @@ static dma_addr_t map_page(struct device *dev, struct page *page, if (addr == DMA_ERROR_CODE) goto out; - iommu_flush_complete(domain); + domain_flush_complete(domain); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -2039,7 +2129,7 @@ static void unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, __unmap_single(domain->priv, dma_addr, size, dir); - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); } @@ -2104,7 +2194,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist, goto unmap; } - iommu_flush_complete(domain); + domain_flush_complete(domain); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -2150,7 +2240,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist, s->dma_address = s->dma_length = 0; } - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); } @@ -2200,7 +2290,7 @@ static void *alloc_coherent(struct device *dev, size_t size, goto out_free; } - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); @@ -2232,7 +2322,7 @@ static void free_coherent(struct device *dev, size_t size, __unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL); - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); @@ -2476,7 +2566,7 @@ static void amd_iommu_detach_device(struct iommu_domain *dom, if (!iommu) return; - iommu_flush_device(dev); + device_flush_dte(dev); iommu_completion_wait(iommu); } @@ -2542,7 +2632,7 @@ static int amd_iommu_unmap(struct iommu_domain *dom, unsigned long iova, unmap_size = iommu_unmap_page(domain, iova, page_size); mutex_unlock(&domain->api_lock); - iommu_flush_tlb_pde(domain); + domain_flush_tlb_pde(domain); return get_order(unmap_size); } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 246d727..9179c21 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -137,6 +137,7 @@ int amd_iommus_present; /* IOMMUs have a non-present cache? */ bool amd_iommu_np_cache __read_mostly; +bool amd_iommu_iotlb_sup __read_mostly = true; /* * The ACPI table parsing functions set this variable on an error @@ -180,6 +181,12 @@ static u32 dev_table_size; /* size of the device table */ static u32 alias_table_size; /* size of the alias table */ static u32 rlookup_table_size; /* size if the rlookup table */ +/* + * This function flushes all internal caches of + * the IOMMU used by this driver. + */ +extern void iommu_flush_all_caches(struct amd_iommu *iommu); + static inline void update_last_devid(u16 devid) { if (devid > amd_iommu_last_bdf) @@ -293,9 +300,23 @@ static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit) /* Function to enable the hardware */ static void iommu_enable(struct amd_iommu *iommu) { - printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n", + static const char * const feat_str[] = { + "PreF", "PPR", "X2APIC", "NX", "GT", "[5]", + "IA", "GA", "HE", "PC", NULL + }; + int i; + + printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx", dev_name(&iommu->dev->dev), iommu->cap_ptr); + if (iommu->cap & (1 << IOMMU_CAP_EFR)) { + printk(KERN_CONT " extended features: "); + for (i = 0; feat_str[i]; ++i) + if (iommu_feature(iommu, (1ULL << i))) + printk(KERN_CONT " %s", feat_str[i]); + } + printk(KERN_CONT "\n"); + iommu_feature_enable(iommu, CONTROL_IOMMU_EN); } @@ -651,7 +672,7 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) static void __init init_iommu_from_pci(struct amd_iommu *iommu) { int cap_ptr = iommu->cap_ptr; - u32 range, misc; + u32 range, misc, low, high; int i, j; pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET, @@ -667,6 +688,15 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu) MMIO_GET_LD(range)); iommu->evt_msi_num = MMIO_MSI_NUM(misc); + if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB))) + amd_iommu_iotlb_sup = false; + + /* read extended feature bits */ + low = readl(iommu->mmio_base + MMIO_EXT_FEATURES); + high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4); + + iommu->features = ((u64)high << 32) | low; + if (!is_rd890_iommu(iommu->dev)) return; @@ -1004,10 +1034,11 @@ static int iommu_setup_msi(struct amd_iommu *iommu) if (pci_enable_msi(iommu->dev)) return 1; - r = request_irq(iommu->dev->irq, amd_iommu_int_handler, - IRQF_SAMPLE_RANDOM, - "AMD-Vi", - NULL); + r = request_threaded_irq(iommu->dev->irq, + amd_iommu_int_handler, + amd_iommu_int_thread, + 0, "AMD-Vi", + iommu->dev); if (r) { pci_disable_msi(iommu->dev); @@ -1244,6 +1275,7 @@ static void enable_iommus(void) iommu_set_exclusion_range(iommu); iommu_init_msi(iommu); iommu_enable(iommu); + iommu_flush_all_caches(iommu); } } @@ -1274,8 +1306,8 @@ static void amd_iommu_resume(void) * we have to flush after the IOMMUs are enabled because a * disabled IOMMU will never execute the commands we send */ - amd_iommu_flush_all_devices(); - amd_iommu_flush_all_domains(); + for_each_iommu(iommu) + iommu_flush_all_caches(iommu); } static int amd_iommu_suspend(void) diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index cd1ffed..289e928 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -177,7 +177,6 @@ static struct clocksource clocksource_apbt = { .rating = APBT_CLOCKSOURCE_RATING, .read = apbt_read_clocksource, .mask = APBT_MASK, - .shift = APBT_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .resume = apbt_restart_clocksource, }; @@ -543,14 +542,7 @@ static int apbt_clocksource_register(void) if (t1 == apbt_read_clocksource(&clocksource_apbt)) panic("APBT counter not counting. APBT disabled\n"); - /* - * initialize and register APBT clocksource - * convert that to ns/clock cycle - * mult = (ns/c) * 2^APBT_SHIFT - */ - clocksource_apbt.mult = div_sc(MSEC_PER_SEC, - (unsigned long) apbt_freq, APBT_SHIFT); - clocksource_register(&clocksource_apbt); + clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000); return 0; } diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 86d1ad4..3d2661c 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -30,6 +30,22 @@ #include <asm/amd_nb.h> #include <asm/x86_init.h> +/* + * Using 512M as goal, in case kexec will load kernel_big + * that will do the on-position decompress, and could overlap with + * with the gart aperture that is used. + * Sequence: + * kernel_small + * ==> kexec (with kdump trigger path or gart still enabled) + * ==> kernel_small (gart area become e820_reserved) + * ==> kexec (with kdump trigger path or gart still enabled) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * So don't use 512M below as gart iommu, leave the space for kernel + * code for safe. + */ +#define GART_MIN_ADDR (512ULL << 20) +#define GART_MAX_ADDR (1ULL << 32) + int gart_iommu_aperture; int gart_iommu_aperture_disabled __initdata; int gart_iommu_aperture_allowed __initdata; @@ -70,21 +86,9 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - /* - * using 512M as goal, in case kexec will load kernel_big - * that will do the on position decompress, and could overlap with - * that position with gart that is used. - * sequende: - * kernel_small - * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) - * ==> kernel_small(gart area become e820_reserved) - * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) - * ==> kerne_big (uncompressed size will be big than 64M or 128M) - * so don't use 512M below as gart iommu, leave the space for kernel - * code for safe - */ - addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20); - if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) { + addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR, + aper_size, aper_size); + if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) { printk(KERN_ERR "Cannot allocate aperture memory hole (%lx,%uK)\n", addr, aper_size>>10); @@ -499,7 +503,7 @@ out: * Don't enable translation yet but enable GART IO and CPU * accesses and set DISTLBWALKPRB since GART table memory is UC. */ - u32 ctl = DISTLBWALKPRB | aper_order << 1; + u32 ctl = aper_order << 1; bus = amd_nb_bus_dev_ranges[i].bus; dev_base = amd_nb_bus_dev_ranges[i].dev_base; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index fabf01e..f92a8e5 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -505,7 +505,7 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) { + if (this_cpu_has(X86_FEATURE_ARAT)) { lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; /* Make LAPIC timer preferrable over percpu HPET */ lapic_clockevent.rating = 150; @@ -1237,6 +1237,17 @@ void __cpuinit setup_local_APIC(void) /* always use the value from LDR */ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = logical_smp_processor_id(); + + /* + * Some NUMA implementations (NUMAQ) don't initialize apicid to + * node mapping during NUMA init. Now that logical apicid is + * guaranteed to be known, give it another chance. This is already + * a bit too late - percpu allocation has already happened without + * proper NUMA affinity. + */ + if (apic->x86_32_numa_cpu_node) + set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu), + apic->x86_32_numa_cpu_node(cpu)); #endif /* @@ -1812,30 +1823,41 @@ void smp_spurious_interrupt(struct pt_regs *regs) */ void smp_error_interrupt(struct pt_regs *regs) { - u32 v, v1; + u32 v0, v1; + u32 i = 0; + static const char * const error_interrupt_reason[] = { + "Send CS error", /* APIC Error Bit 0 */ + "Receive CS error", /* APIC Error Bit 1 */ + "Send accept error", /* APIC Error Bit 2 */ + "Receive accept error", /* APIC Error Bit 3 */ + "Redirectable IPI", /* APIC Error Bit 4 */ + "Send illegal vector", /* APIC Error Bit 5 */ + "Received illegal vector", /* APIC Error Bit 6 */ + "Illegal register address", /* APIC Error Bit 7 */ + }; exit_idle(); irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); + v0 = apic_read(APIC_ESR); apic_write(APIC_ESR, 0); v1 = apic_read(APIC_ESR); ack_APIC_irq(); atomic_inc(&irq_err_count); - /* - * Here is what the APIC error bits mean: - * 0: Send CS error - * 1: Receive CS error - * 2: Send accept error - * 3: Receive accept error - * 4: Reserved - * 5: Send illegal vector - * 6: Received illegal vector - * 7: Illegal register address - */ - pr_debug("APIC error on CPU%d: %02x(%02x)\n", - smp_processor_id(), v , v1); + apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)", + smp_processor_id(), v0 , v1); + + v1 = v1 & 0xff; + while (v1) { + if (v1 & 0x1) + apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]); + i++; + v1 >>= 1; + }; + + apic_printk(APIC_DEBUG, KERN_CONT "\n"); + irq_exit(); } @@ -2003,21 +2025,6 @@ void default_init_apic_ldr(void) apic_write(APIC_LDR, val); } -#ifdef CONFIG_X86_32 -int default_x86_32_numa_cpu_node(int cpu) -{ -#ifdef CONFIG_NUMA - int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); - - if (apicid != BAD_APICID) - return __apicid_to_node[apicid]; - return NUMA_NO_NODE; -#else - return 0; -#endif -} -#endif - /* * Power management */ diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index f1baa2d..775b82b 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -119,14 +119,6 @@ static void noop_apic_write(u32 reg, u32 v) WARN_ON_ONCE(cpu_has_apic && !disable_apic); } -#ifdef CONFIG_X86_32 -static int noop_x86_32_numa_cpu_node(int cpu) -{ - /* we're always on node 0 */ - return 0; -} -#endif - struct apic apic_noop = { .name = "noop", .probe = noop_probe, @@ -195,6 +187,5 @@ struct apic apic_noop = { #ifdef CONFIG_X86_32 .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node, #endif }; diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 541a2e4..d84ac5a5 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -253,5 +253,4 @@ struct apic apic_bigsmp = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 3e9de48..70533de 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -510,11 +510,6 @@ static void es7000_setup_apic_routing(void) nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); } -static int es7000_numa_cpu_node(int cpu) -{ - return 0; -} - static int es7000_cpu_present_to_apicid(int mps_cpu) { if (!mps_cpu) @@ -688,7 +683,6 @@ struct apic __refdata apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, - .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; struct apic __refdata apic_es7000 = { @@ -752,5 +746,4 @@ struct apic __refdata apic_es7000 = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, - .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 68df09b..45fd33d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -128,8 +128,8 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr); +static int io_apic_setup_irq_pin(unsigned int irq, int node, + struct io_apic_irq_attr *attr); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) @@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ -int +static int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) { struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); @@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr) +int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr) { unsigned int id = attr->ioapic, pin = attr->ioapic_pin; int ret; diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 6273eee..30f1331 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -48,8 +48,6 @@ #include <asm/e820.h> #include <asm/ipi.h> -#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) - int found_numaq; /* @@ -79,31 +77,20 @@ int quad_local_to_mp_bus_id[NR_CPUS/4][4]; static inline void numaq_register_node(int node, struct sys_cfg_data *scd) { struct eachquadmem *eq = scd->eq + node; + u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20; + u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20; + int ret; - node_set_online(node); - - /* Convert to pages */ - node_start_pfn[node] = - MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size); - - node_end_pfn[node] = - MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); - - memblock_x86_register_active_regions(node, node_start_pfn[node], - node_end_pfn[node]); - - memory_present(node, node_start_pfn[node], node_end_pfn[node]); - - node_remap_size[node] = node_memmap_size_bytes(node, - node_start_pfn[node], - node_end_pfn[node]); + node_set(node, numa_nodes_parsed); + ret = numa_add_memblk(node, start, end); + BUG_ON(ret < 0); } /* * Function: smp_dump_qct() * * Description: gets memory layout from the quad config table. This - * function also updates node_online_map with the nodes (quads) present. + * function also updates numa_nodes_parsed with the nodes (quads) present. */ static void __init smp_dump_qct(void) { @@ -112,7 +99,6 @@ static void __init smp_dump_qct(void) scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR); - nodes_clear(node_online_map); for_each_node(node) { if (scd->quads_present31_0 & (1 << node)) numaq_register_node(node, scd); @@ -282,14 +268,14 @@ static __init void early_check_numaq(void) } } -int __init get_memcfg_numaq(void) +int __init numaq_numa_init(void) { early_check_numaq(); if (!found_numaq) - return 0; + return -ENOENT; smp_dump_qct(); - return 1; + return 0; } #define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER) diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index fc84c7b..6541e47 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -172,7 +172,6 @@ struct apic apic_default = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; extern struct apic apic_numaq; diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index e4b8059..35bcd7d 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -551,5 +551,4 @@ struct apic apic_summit = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = summit_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 33b10a0..7acd2d2 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -37,6 +37,13 @@ #include <asm/smp.h> #include <asm/x86_init.h> #include <asm/emergency-restart.h> +#include <asm/nmi.h> + +/* BMC sets a bit this MMR non-zero before sending an NMI */ +#define UVH_NMI_MMR UVH_SCRATCH5 +#define UVH_NMI_MMR_CLEAR (UVH_NMI_MMR + 8) +#define UV_NMI_PENDING_MASK (1UL << 63) +DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count); DEFINE_PER_CPU(int, x2apic_extra_bits); @@ -642,18 +649,46 @@ void __cpuinit uv_cpu_init(void) */ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) { + unsigned long real_uv_nmi; + int bid; + if (reason != DIE_NMIUNKNOWN) return NOTIFY_OK; if (in_crash_kexec) /* do nothing if entering the crash kernel */ return NOTIFY_OK; + /* - * Use a lock so only one cpu prints at a time - * to prevent intermixed output. + * Each blade has an MMR that indicates when an NMI has been sent + * to cpus on the blade. If an NMI is detected, atomically + * clear the MMR and update a per-blade NMI count used to + * cause each cpu on the blade to notice a new NMI. + */ + bid = uv_numa_blade_id(); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + + if (unlikely(real_uv_nmi)) { + spin_lock(&uv_blade_info[bid].nmi_lock); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + if (real_uv_nmi) { + uv_blade_info[bid].nmi_count++; + uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK); + } + spin_unlock(&uv_blade_info[bid].nmi_lock); + } + + if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count)) + return NOTIFY_DONE; + + __get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count; + + /* + * Use a lock so only one cpu prints at a time. + * This prevents intermixed output. */ spin_lock(&uv_nmi_lock); - pr_info("NMI stack dump cpu %u:\n", smp_processor_id()); + pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id()); dump_stack(); spin_unlock(&uv_nmi_lock); @@ -661,7 +696,8 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) } static struct notifier_block uv_dump_stack_nmi_nb = { - .notifier_call = uv_handle_nmi + .notifier_call = uv_handle_nmi, + .priority = NMI_LOCAL_LOW_PRIOR - 1, }; void uv_register_nmi_notifier(void) @@ -720,8 +756,9 @@ void __init uv_system_init(void) printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); - uv_blade_info = kmalloc(bytes, GFP_KERNEL); + uv_blade_info = kzalloc(bytes, GFP_KERNEL); BUG_ON(!uv_blade_info); + for (blade = 0; blade < uv_num_possible_blades(); blade++) uv_blade_info[blade].memory_nid = -1; @@ -747,6 +784,7 @@ void __init uv_system_init(void) uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + spin_lock_init(&uv_blade_info[blade].nmi_lock); max_pnode = max(pnode, max_pnode); blade++; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0b4be43..3bfa022 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include <linux/kthread.h> #include <linux/jiffies.h> #include <linux/acpi.h> +#include <linux/syscore_ops.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -1237,7 +1238,7 @@ static int suspend(int vetoable) dpm_suspend_noirq(PMSG_SUSPEND); local_irq_disable(); - sysdev_suspend(PMSG_SUSPEND); + syscore_suspend(); local_irq_enable(); @@ -1255,7 +1256,7 @@ static int suspend(int vetoable) apm_error("suspend", err); err = (err == APM_SUCCESS) ? 0 : -EIO; - sysdev_resume(); + syscore_resume(); local_irq_enable(); dpm_resume_noirq(PMSG_RESUME); @@ -1279,7 +1280,7 @@ static void standby(void) dpm_suspend_noirq(PMSG_SUSPEND); local_irq_disable(); - sysdev_suspend(PMSG_SUSPEND); + syscore_suspend(); local_irq_enable(); err = set_system_power_state(APM_STATE_STANDBY); @@ -1287,7 +1288,7 @@ static void standby(void) apm_error("standby", err); local_irq_disable(); - sysdev_resume(); + syscore_resume(); local_irq_enable(); dpm_resume_noirq(PMSG_RESUME); diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 3f0ebe4..6042981 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ -obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 3ecece0..6f9d1f6 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -613,8 +613,27 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #endif /* As a rule processors have APIC timer running in deep C states */ - if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400)) + if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400)) set_cpu_cap(c, X86_FEATURE_ARAT); + + /* + * Disable GART TLB Walk Errors on Fam10h. We do this here + * because this is always needed when GART is enabled, even in a + * kernel which has no MCE support built in. + */ + if (c->x86 == 0x10) { + /* + * BIOS should disable GartTlbWlk Errors themself. If + * it doesn't do it here as suggested by the BKDG. + * + * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 + */ + u64 mask; + + rdmsrl(MSR_AMD64_MCx_MASK(4), mask); + mask |= (1 << 10); + wrmsrl(MSR_AMD64_MCx_MASK(4), mask); + } } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index e2ced00..173f3a3 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -565,8 +565,7 @@ void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx); - if (eax > 0) - c->x86_capability[9] = ebx; + c->x86_capability[9] = ebx; } /* AMD-defined flags: level 0x80000001 */ diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig deleted file mode 100644 index 870e6cc..0000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ /dev/null @@ -1,266 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_PCC_CPUFREQ - tristate "Processor Clocking Control interface driver" - depends on ACPI && ACPI_PROCESSOR - help - This driver adds support for the PCC interface. - - For details, take a look at: - <file:Documentation/cpu-freq/pcc-cpufreq.txt>. - - To compile this driver as a module, choose M here: the - module will be called pcc-cpufreq. - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config ELAN_CPUFREQ - tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC400 and SC410 - processors. - - You need to specify the processor maximum speed as boot - parameter: elanfreq=maxspeed (in kHz) or as module - parameter "max_freq". - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config SC520_CPUFREQ - tristate "AMD Elan SC520" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC520 processor. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - - -config X86_POWERNOW_K6 - tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K6-2+ and mobile - AMD K6-3+ processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7 - tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K7 mobile processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7_ACPI - bool - depends on X86_POWERNOW_K7 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) - depends on X86_32 - default y - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR - help - This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at <file:Documentation/cpu-freq/>. - -config X86_GX_SUSPMOD - tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on X86_32 && PCI - help - This add the CPUFreq driver for NatSemi Geode processors which - support suspend modulation. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 - depends on X86_32 || (X86_64 && ACPI_PROCESSOR) - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO_TABLE - bool "Built-in tables for Banias CPUs" - depends on X86_32 && X86_SPEEDSTEP_CENTRINO - default y - help - Use built-in tables for Banias CPUs if ACPI encoding - is not available. - - If in doubt, say N. - -config X86_SPEEDSTEP_ICH - tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, - ICH3 or ICH4 southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_SMI - tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) - on systems which have an Intel 440BX/ZX/MX southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at <file:Documentation/cpu-freq/>. - - Unless you are absolutely sure say N. - -config X86_CPUFREQ_NFORCE2 - tristate "nVidia nForce2 FSB changing" - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for FSB changing on nVidia nForce2 - platforms. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGRUN - tristate "Transmeta LongRun" - depends on X86_32 - help - This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors - which support LongRun. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGHAUL - tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE - depends on X86_32 && ACPI_PROCESSOR - help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T - processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for VIA C7 processors. However, this driver - does not have any safeguards to prevent operating the CPU out of spec - and is thus considered dangerous. Please use the regular ACPI cpufreq - driver, enabled by CONFIG_X86_ACPI_CPUFREQ. - - If in doubt, say N. - -comment "shared options" - -config X86_SPEEDSTEP_LIB - tristate - default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) - -config X86_SPEEDSTEP_RELAXED_CAP_CHECK - bool "Relaxed speedstep capability checks" - depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) - help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This - option lets the probing code bypass some of those checks if the - parameter "relaxed_check=1" is passed to the module. - -endif # CPU_FREQ - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile deleted file mode 100644 index bd54bf6..0000000 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Link order matters. K8 is preferred to ACPI because of firmware bugs in early -# K8 systems. ACPI is preferred to all other hardware-specific drivers. -# speedstep-* is preferred over p4-clockmod. - -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o -obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o -obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o -obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_LONGHAUL) += longhaul.o -obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o -obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o -obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o -obj-$(CONFIG_X86_LONGRUN) += longrun.o -obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o -obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o -obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o -obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o -obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o -obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c deleted file mode 100644 index a2baafb..0000000 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ /dev/null @@ -1,776 +0,0 @@ -/* - * acpi-cpufreq.c - ACPI Processor P-States Driver - * - * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> - * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> - * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> - * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/dmi.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> -#include "mperf.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "acpi-cpufreq", msg) - -MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); -MODULE_DESCRIPTION("ACPI Processor P-States Driver"); -MODULE_LICENSE("GPL"); - -enum { - UNDEFINED_CAPABLE = 0, - SYSTEM_INTEL_MSR_CAPABLE, - SYSTEM_IO_CAPABLE, -}; - -#define INTEL_MSR_RANGE (0xffff) - -struct acpi_cpufreq_data { - struct acpi_processor_performance *acpi_data; - struct cpufreq_frequency_table *freq_table; - unsigned int resume; - unsigned int cpu_feature; -}; - -static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); - -/* acpi_perf_data is a pointer to percpu data. */ -static struct acpi_processor_performance __percpu *acpi_perf_data; - -static struct cpufreq_driver acpi_cpufreq_driver; - -static unsigned int acpi_pstate_strict; - -static int check_est_cpu(unsigned int cpuid) -{ - struct cpuinfo_x86 *cpu = &cpu_data(cpuid); - - return cpu_has(cpu, X86_FEATURE_EST); -} - -static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) -{ - struct acpi_processor_performance *perf; - int i; - - perf = data->acpi_data; - - for (i = 0; i < perf->state_count; i++) { - if (value == perf->states[i].status) - return data->freq_table[i].frequency; - } - return 0; -} - -static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) -{ - int i; - struct acpi_processor_performance *perf; - - msr &= INTEL_MSR_RANGE; - perf = data->acpi_data; - - for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) - return data->freq_table[i].frequency; - } - return data->freq_table[0].frequency; -} - -static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) -{ - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - return extract_msr(val, data); - case SYSTEM_IO_CAPABLE: - return extract_io(val, data); - default: - return 0; - } -} - -struct msr_addr { - u32 reg; -}; - -struct io_addr { - u16 port; - u8 bit_width; -}; - -struct drv_cmd { - unsigned int type; - const struct cpumask *mask; - union { - struct msr_addr msr; - struct io_addr io; - } addr; - u32 val; -}; - -/* Called via smp_call_function_single(), on the target CPU */ -static void do_drv_read(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 h; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, cmd->val, h); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_read_port((acpi_io_address)cmd->addr.io.port, - &cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -/* Called via smp_call_function_many(), on the target CPUs */ -static void do_drv_write(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 lo, hi; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, lo, hi); - lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); - wrmsr(cmd->addr.msr.reg, lo, hi); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_write_port((acpi_io_address)cmd->addr.io.port, - cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -static void drv_read(struct drv_cmd *cmd) -{ - int err; - cmd->val = 0; - - err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); - WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ -} - -static void drv_write(struct drv_cmd *cmd) -{ - int this_cpu; - - this_cpu = get_cpu(); - if (cpumask_test_cpu(this_cpu, cmd->mask)) - do_drv_write(cmd); - smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); - put_cpu(); -} - -static u32 get_cur_val(const struct cpumask *mask) -{ - struct acpi_processor_performance *perf; - struct drv_cmd cmd; - - if (unlikely(cpumask_empty(mask))) - return 0; - - switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - break; - default: - return 0; - } - - cmd.mask = mask; - drv_read(&cmd); - - dprintk("get_cur_val = %u\n", cmd.val); - - return cmd.val; -} - -static unsigned int get_cur_freq_on_cpu(unsigned int cpu) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu); - unsigned int freq; - unsigned int cached_freq; - - dprintk("get_cur_freq_on_cpu (%d)\n", cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return 0; - } - - cached_freq = data->freq_table[data->acpi_data->state].frequency; - freq = extract_freq(get_cur_val(cpumask_of(cpu)), data); - if (freq != cached_freq) { - /* - * The dreaded BIOS frequency change behind our back. - * Force set the frequency on next target call. - */ - data->resume = 1; - } - - dprintk("cur freq = %u\n", freq); - - return freq; -} - -static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, - struct acpi_cpufreq_data *data) -{ - unsigned int cur_freq; - unsigned int i; - - for (i = 0; i < 100; i++) { - cur_freq = extract_freq(get_cur_val(mask), data); - if (cur_freq == freq) - return 1; - udelay(10); - } - return 0; -} - -static int acpi_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - struct acpi_processor_performance *perf; - struct cpufreq_freqs freqs; - struct drv_cmd cmd; - unsigned int next_state = 0; /* Index into freq_table */ - unsigned int next_perf_state = 0; /* Index into perf table */ - unsigned int i; - int result = 0; - - dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return -ENODEV; - } - - perf = data->acpi_data; - result = cpufreq_frequency_table_target(policy, - data->freq_table, - target_freq, - relation, &next_state); - if (unlikely(result)) { - result = -ENODEV; - goto out; - } - - next_perf_state = data->freq_table[next_state].index; - if (perf->state == next_perf_state) { - if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", - next_perf_state); - data->resume = 0; - } else { - dprintk("Already at target state (P%d)\n", - next_perf_state); - goto out; - } - } - - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - default: - result = -ENODEV; - goto out; - } - - /* cpufreq holds the hotplug lock, so we are safe from here on */ - if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cmd.mask = policy->cpus; - else - cmd.mask = cpumask_of(policy->cpu); - - freqs.old = perf->states[perf->state].core_frequency * 1000; - freqs.new = data->freq_table[next_state].frequency; - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - drv_write(&cmd); - - if (acpi_pstate_strict) { - if (!check_freqs(cmd.mask, freqs.new, data)) { - dprintk("acpi_cpufreq_target failed (%d)\n", - policy->cpu); - result = -EAGAIN; - goto out; - } - } - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - perf->state = next_perf_state; - -out: - return result; -} - -static int acpi_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_verify\n"); - - return cpufreq_frequency_table_verify(policy, data->freq_table); -} - -static unsigned long -acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) -{ - struct acpi_processor_performance *perf = data->acpi_data; - - if (cpu_khz) { - /* search the closest match to cpu_khz */ - unsigned int i; - unsigned long freq; - unsigned long freqn = perf->states[0].core_frequency * 1000; - - for (i = 0; i < (perf->state_count-1); i++) { - freq = freqn; - freqn = perf->states[i+1].core_frequency * 1000; - if ((2 * cpu_khz) > (freqn + freq)) { - perf->state = i; - return freq; - } - } - perf->state = perf->state_count-1; - return freqn; - } else { - /* assume CPU is at P0... */ - perf->state = 0; - return perf->states[0].core_frequency * 1000; - } -} - -static void free_acpi_perf_data(void) -{ - unsigned int i; - - /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ - for_each_possible_cpu(i) - free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) - ->shared_cpu_map); - free_percpu(acpi_perf_data); -} - -/* - * acpi_cpufreq_early_init - initialize ACPI P-States library - * - * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) - * in order to determine correct frequency and voltage pairings. We can - * do _PDC and _PSD and find out the processor dependency for the - * actual init that will happen later... - */ -static int __init acpi_cpufreq_early_init(void) -{ - unsigned int i; - dprintk("acpi_cpufreq_early_init\n"); - - acpi_perf_data = alloc_percpu(struct acpi_processor_performance); - if (!acpi_perf_data) { - dprintk("Memory allocation error for acpi_perf_data.\n"); - return -ENOMEM; - } - for_each_possible_cpu(i) { - if (!zalloc_cpumask_var_node( - &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, - GFP_KERNEL, cpu_to_node(i))) { - - /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ - free_acpi_perf_data(); - return -ENOMEM; - } - } - - /* Do initialization in ACPI core */ - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; - -static int sw_any_bug_found(const struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static const struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; - -static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) -{ - /* Intel Xeon Processor 7100 Series Specification Update - * http://www.intel.com/Assets/PDF/specupdate/314554.pdf - * AL30: A Machine Check Exception (MCE) Occurring during an - * Enhanced Intel SpeedStep Technology Ratio Change May Cause - * Both Processor Cores to Lock Up. */ - if (c->x86_vendor == X86_VENDOR_INTEL) { - if ((c->x86 == 15) && - (c->x86_model == 6) && - (c->x86_mask == 8)) { - printk(KERN_INFO "acpi-cpufreq: Intel(R) " - "Xeon(R) 7100 Errata AL30, processors may " - "lock up on frequency changes: disabling " - "acpi-cpufreq.\n"); - return -ENODEV; - } - } - return 0; -} -#endif - -static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - unsigned int valid_states = 0; - unsigned int cpu = policy->cpu; - struct acpi_cpufreq_data *data; - unsigned int result = 0; - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - struct acpi_processor_performance *perf; -#ifdef CONFIG_SMP - static int blacklisted; -#endif - - dprintk("acpi_cpufreq_cpu_init\n"); - -#ifdef CONFIG_SMP - if (blacklisted) - return blacklisted; - blacklisted = acpi_cpufreq_blacklist(c); - if (blacklisted) - return blacklisted; -#endif - - data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); - per_cpu(acfreq_data, cpu) = data; - - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) - acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; - - result = acpi_processor_register_performance(data->acpi_data, cpu); - if (result) - goto err_free; - - perf = data->acpi_data; - policy->shared_type = perf->shared_type; - - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - cpumask_copy(policy->cpus, perf->shared_cpu_map); - } - cpumask_copy(policy->related_cpus, perf->shared_cpu_map); - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - cpumask_copy(policy->cpus, cpu_core_mask(cpu)); - } -#endif - - /* capability check */ - if (perf->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if (perf->control_register.space_id != perf->status_register.space_id) { - result = -ENODEV; - goto err_unreg; - } - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - dprintk("SYSTEM IO addr space\n"); - data->cpu_feature = SYSTEM_IO_CAPABLE; - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - dprintk("HARDWARE addr space\n"); - if (!check_est_cpu(cpu)) { - result = -ENODEV; - goto err_unreg; - } - data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; - break; - default: - dprintk("Unknown addr space %d\n", - (u32) (perf->control_register.space_id)); - result = -ENODEV; - goto err_unreg; - } - - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * - (perf->state_count+1), GFP_KERNEL); - if (!data->freq_table) { - result = -ENOMEM; - goto err_unreg; - } - - /* detect transition latency */ - policy->cpuinfo.transition_latency = 0; - for (i = 0; i < perf->state_count; i++) { - if ((perf->states[i].transition_latency * 1000) > - policy->cpuinfo.transition_latency) - policy->cpuinfo.transition_latency = - perf->states[i].transition_latency * 1000; - } - - /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ - if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && - policy->cpuinfo.transition_latency > 20 * 1000) { - policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO - "P-state transition latency capped at 20 uS\n"); - } - - /* table init */ - for (i = 0; i < perf->state_count; i++) { - if (i > 0 && perf->states[i].core_frequency >= - data->freq_table[valid_states-1].frequency / 1000) - continue; - - data->freq_table[valid_states].index = i; - data->freq_table[valid_states].frequency = - perf->states[i].core_frequency * 1000; - valid_states++; - } - data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; - perf->state = 0; - - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); - if (result) - goto err_freqfree; - - if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) - printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - /* Current speed is unknown and not detectable by IO port */ - policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - acpi_cpufreq_driver.get = get_cur_freq_on_cpu; - policy->cur = get_cur_freq_on_cpu(cpu); - break; - default: - break; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf; - - dprintk("CPU%u - ACPI performance management activated.\n", cpu); - for (i = 0; i < perf->state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", - (i == perf->state ? '*' : ' '), i, - (u32) perf->states[i].core_frequency, - (u32) perf->states[i].power, - (u32) perf->states[i].transition_latency); - - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - - /* - * the first call to ->target() should result in us actually - * writing something to the appropriate registers. - */ - data->resume = 1; - - return result; - -err_freqfree: - kfree(data->freq_table); -err_unreg: - acpi_processor_unregister_performance(perf, cpu); -err_free: - kfree(data); - per_cpu(acfreq_data, cpu) = NULL; - - return result; -} - -static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_cpu_exit\n"); - - if (data) { - cpufreq_frequency_table_put_attr(policy->cpu); - per_cpu(acfreq_data, policy->cpu) = NULL; - acpi_processor_unregister_performance(data->acpi_data, - policy->cpu); - kfree(data->freq_table); - kfree(data); - } - - return 0; -} - -static int acpi_cpufreq_resume(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_resume\n"); - - data->resume = 1; - - return 0; -} - -static struct freq_attr *acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, -}; - -static int __init acpi_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - dprintk("acpi_cpufreq_init\n"); - - ret = acpi_cpufreq_early_init(); - if (ret) - return ret; - - ret = cpufreq_register_driver(&acpi_cpufreq_driver); - if (ret) - free_acpi_perf_data(); - - return ret; -} - -static void __exit acpi_cpufreq_exit(void) -{ - dprintk("acpi_cpufreq_exit\n"); - - cpufreq_unregister_driver(&acpi_cpufreq_driver); - - free_percpu(acpi_perf_data); -} - -module_param(acpi_pstate_strict, uint, 0644); -MODULE_PARM_DESC(acpi_pstate_strict, - "value 0 or non-zero. non-zero -> strict ACPI checks are " - "performed during frequency changes."); - -late_initcall(acpi_cpufreq_init); -module_exit(acpi_cpufreq_exit); - -MODULE_ALIAS("acpi"); diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c deleted file mode 100644 index 141abeb..0000000 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/delay.h> - -#define NFORCE2_XTAL 25 -#define NFORCE2_BOOTFSB 0x48 -#define NFORCE2_PLLENABLE 0xa8 -#define NFORCE2_PLLREG 0xa4 -#define NFORCE2_PLLADR 0xa0 -#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) - -#define NFORCE2_MIN_FSB 50 -#define NFORCE2_SAFE_DISTANCE 50 - -/* Delay in ms between FSB changes */ -/* #define NFORCE2_DELAY 10 */ - -/* - * nforce2_chipset: - * FSB is changed using the chipset - */ -static struct pci_dev *nforce2_dev; - -/* fid: - * multiplier * 10 - */ -static int fid; - -/* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) - */ -static int min_fsb; -static int max_fsb; - -MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); -MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); -MODULE_LICENSE("GPL"); - -module_param(fid, int, 0444); -module_param(min_fsb, int, 0444); - -MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); -MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); - -#define PFX "cpufreq-nforce2: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "cpufreq-nforce2", msg) - -/** - * nforce2_calc_fsb - calculate FSB - * @pll: PLL value - * - * Calculates FSB from PLL value - */ -static int nforce2_calc_fsb(int pll) -{ - unsigned char mul, div; - - mul = (pll >> 8) & 0xff; - div = pll & 0xff; - - if (div > 0) - return NFORCE2_XTAL * mul / div; - - return 0; -} - -/** - * nforce2_calc_pll - calculate PLL value - * @fsb: FSB - * - * Calculate PLL value for given FSB - */ -static int nforce2_calc_pll(unsigned int fsb) -{ - unsigned char xmul, xdiv; - unsigned char mul = 0, div = 0; - int tried = 0; - - /* Try to calculate multiplier and divider up to 4 times */ - while (((mul == 0) || (div == 0)) && (tried <= 3)) { - for (xdiv = 2; xdiv <= 0x80; xdiv++) - for (xmul = 1; xmul <= 0xfe; xmul++) - if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == - fsb + tried) { - mul = xmul; - div = xdiv; - } - tried++; - } - - if ((mul == 0) || (div == 0)) - return -1; - - return NFORCE2_PLL(mul, div); -} - -/** - * nforce2_write_pll - write PLL value to chipset - * @pll: PLL value - * - * Writes new FSB PLL value to chipset - */ -static void nforce2_write_pll(int pll) -{ - int temp; - - /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); - - /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); - - return; -} - -/** - * nforce2_fsb_read - Read FSB - * - * Read FSB from chipset - * If bootfsb != 0, return FSB at boot-time - */ -static unsigned int nforce2_fsb_read(int bootfsb) -{ - struct pci_dev *nforce2_sub5; - u32 fsb, temp = 0; - - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (!nforce2_sub5) - return 0; - - pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); - fsb /= 1000000; - - /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - - if (bootfsb || !temp) - return fsb; - - /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); - fsb = nforce2_calc_fsb(temp); - - return fsb; -} - -/** - * nforce2_set_fsb - set new FSB - * @fsb: New FSB - * - * Sets new FSB - */ -static int nforce2_set_fsb(unsigned int fsb) -{ - u32 temp = 0; - unsigned int tfsb; - int diff; - int pll = 0; - - if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); - return -EINVAL; - } - - tfsb = nforce2_fsb_read(0); - if (!tfsb) { - printk(KERN_ERR PFX "Error while reading the FSB\n"); - return -EINVAL; - } - - /* First write? Then set actual value */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if (!temp) { - pll = nforce2_calc_pll(tfsb); - - if (pll < 0) - return -EINVAL; - - nforce2_write_pll(pll); - } - - /* Enable write access */ - temp = 0x01; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); - - diff = tfsb - fsb; - - if (!diff) - return 0; - - while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { - if (diff < 0) - tfsb++; - else - tfsb--; - - /* Calculate the PLL reg. value */ - pll = nforce2_calc_pll(tfsb); - if (pll == -1) - return -EINVAL; - - nforce2_write_pll(pll); -#ifdef NFORCE2_DELAY - mdelay(NFORCE2_DELAY); -#endif - } - - temp = 0x40; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); - - return 0; -} - -/** - * nforce2_get - get the CPU frequency - * @cpu: CPU number - * - * Returns the CPU frequency - */ -static unsigned int nforce2_get(unsigned int cpu) -{ - if (cpu) - return 0; - return nforce2_fsb_read(0) * fid * 100; -} - -/** - * nforce2_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int nforce2_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ -/* unsigned long flags; */ - struct cpufreq_freqs freqs; - unsigned int target_fsb; - - if ((target_freq > policy->max) || (target_freq < policy->min)) - return -EINVAL; - - target_fsb = target_freq / (fid * 100); - - freqs.old = nforce2_get(policy->cpu); - freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 platforms */ - - if (freqs.old == freqs.new) - return 0; - - dprintk("Old CPU frequency %d kHz, new %d kHz\n", - freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Disable IRQs */ - /* local_irq_save(flags); */ - - if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR PFX "Changing FSB to %d failed\n", - target_fsb); - else - dprintk("Changed FSB successfully to %d\n", - target_fsb); - - /* Enable IRQs */ - /* local_irq_restore(flags); */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -/** - * nforce2_verify - verifies a new CPUFreq policy - * @policy: new policy - */ -static int nforce2_verify(struct cpufreq_policy *policy) -{ - unsigned int fsb_pol_max; - - fsb_pol_max = policy->max / (fid * 100); - - if (policy->min < (fsb_pol_max * fid * 100)) - policy->max = (fsb_pol_max + 1) * fid * 100; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static int nforce2_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int fsb; - unsigned int rfid; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* Get current FSB */ - fsb = nforce2_fsb_read(0); - - if (!fsb) - return -EIO; - - /* FIX: Get FID from CPU */ - if (!fid) { - if (!cpu_khz) { - printk(KERN_WARNING PFX - "cpu_khz not set, can't calculate multiplier!\n"); - return -ENODEV; - } - - fid = cpu_khz / (fsb * 100); - rfid = fid % 5; - - if (rfid) { - if (rfid > 2) - fid += 5 - rfid; - else - fid -= rfid; - } - } - - printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); - - /* Set maximum FSB to FSB at boot time */ - max_fsb = nforce2_fsb_read(1); - - if (!max_fsb) - return -EIO; - - if (!min_fsb) - min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; - - if (min_fsb < NFORCE2_MIN_FSB) - min_fsb = NFORCE2_MIN_FSB; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = min_fsb * fid * 100; - policy->cpuinfo.max_freq = max_fsb * fid * 100; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = nforce2_get(policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - - return 0; -} - -static int nforce2_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver nforce2_driver = { - .name = "nforce2", - .verify = nforce2_verify, - .target = nforce2_target, - .get = nforce2_get, - .init = nforce2_cpu_init, - .exit = nforce2_cpu_exit, - .owner = THIS_MODULE, -}; - -/** - * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic - * - * Detects nForce2 A2 and C1 stepping - * - */ -static int nforce2_detect_chipset(void) -{ - nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, PCI_ANY_ID, NULL); - - if (nforce2_dev == NULL) - return -ENODEV; - - printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", - nforce2_dev->revision); - printk(KERN_INFO PFX - "FSB changing is maybe unstable and can lead to " - "crashes and data loss.\n"); - - return 0; -} - -/** - * nforce2_init - initializes the nForce2 CPUFreq driver - * - * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init nforce2_init(void) -{ - /* TODO: do we need to detect the processor? */ - - /* detect chipset */ - if (nforce2_detect_chipset()) { - printk(KERN_INFO PFX "No nForce2 chipset.\n"); - return -ENODEV; - } - - return cpufreq_register_driver(&nforce2_driver); -} - -/** - * nforce2_exit - unregisters cpufreq module - * - * Unregisters nForce2 FSB change support. - */ -static void __exit nforce2_exit(void) -{ - cpufreq_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c deleted file mode 100644 index 35a257d..0000000 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Based on documentation provided by Dave Jones. Thanks! - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> -#include <asm/tsc.h> - -#define EPS_BRAND_C7M 0 -#define EPS_BRAND_C7 1 -#define EPS_BRAND_EDEN 2 -#define EPS_BRAND_C3 3 -#define EPS_BRAND_C7D 4 - -struct eps_cpu_data { - u32 fsb; - struct cpufreq_frequency_table freq_table[]; -}; - -static struct eps_cpu_data *eps_cpu[NR_CPUS]; - - -static unsigned int eps_get(unsigned int cpu) -{ - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (cpu) - return 0; - centaur = eps_cpu[cpu]; - if (centaur == NULL) - return 0; - - /* Return current frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - return centaur->fsb * ((lo >> 8) & 0xff); -} - -static int eps_set_state(struct eps_cpu_data *centaur, - unsigned int cpu, - u32 dest_state) -{ - struct cpufreq_freqs freqs; - u32 lo, hi; - int err = 0; - int i; - - freqs.old = eps_get(cpu); - freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Wait while CPU is busy */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i = 0; - while (lo & ((1 << 16) | (1 << 17))) { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } - /* Set new multiplier and voltage */ - wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); - /* Wait until transition end */ - i = 0; - do { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } while (lo & ((1 << 16) | (1 << 17))); - - /* Return current frequency */ -postchange: - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - freqs.new = centaur->fsb * ((lo >> 8) & 0xff); - -#ifdef DEBUG - { - u8 current_multiplier, current_voltage; - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", - current_multiplier); - } -#endif - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - return err; -} - -static int eps_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct eps_cpu_data *centaur; - unsigned int newstate = 0; - unsigned int cpu = policy->cpu; - unsigned int dest_state; - int ret; - - if (unlikely(eps_cpu[cpu] == NULL)) - return -ENODEV; - centaur = eps_cpu[cpu]; - - if (unlikely(cpufreq_frequency_table_target(policy, - &eps_cpu[cpu]->freq_table[0], - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - - /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; - ret = eps_set_state(centaur, cpu, dest_state); - if (ret) - printk(KERN_ERR "eps: Timeout!\n"); - return ret; -} - -static int eps_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &eps_cpu[policy->cpu]->freq_table[0]); -} - -static int eps_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - u32 lo, hi; - u64 val; - u8 current_multiplier, current_voltage; - u8 max_multiplier, max_voltage; - u8 min_multiplier, min_voltage; - u8 brand = 0; - u32 fsb; - struct eps_cpu_data *centaur; - struct cpuinfo_x86 *c = &cpu_data(0); - struct cpufreq_frequency_table *f_table; - int k, step, voltage; - int ret; - int states; - - if (policy->cpu != 0) - return -ENODEV; - - /* Check brand */ - printk(KERN_INFO "eps: Detected VIA "); - - switch (c->x86_model) { - case 10: - rdmsr(0x1153, lo, hi); - brand = (((lo >> 2) ^ lo) >> 18) & 3; - printk(KERN_CONT "Model A "); - break; - case 13: - rdmsr(0x1154, lo, hi); - brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; - printk(KERN_CONT "Model D "); - break; - } - - switch (brand) { - case EPS_BRAND_C7M: - printk(KERN_CONT "C7-M\n"); - break; - case EPS_BRAND_C7: - printk(KERN_CONT "C7\n"); - break; - case EPS_BRAND_EDEN: - printk(KERN_CONT "Eden\n"); - break; - case EPS_BRAND_C7D: - printk(KERN_CONT "C7-D\n"); - break; - case EPS_BRAND_C3: - printk(KERN_CONT "C3\n"); - return -ENODEV; - break; - } - /* Enable Enhanced PowerSaver */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - wrmsrl(MSR_IA32_MISC_ENABLE, val); - /* Can be locked at 0 */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); - return -ENODEV; - } - } - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); - - /* Print limits */ - max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", - max_voltage * 16 + 700); - max_multiplier = (hi >> 8) & 0xff; - printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); - min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", - min_voltage * 16 + 700); - min_multiplier = (hi >> 24) & 0xff; - printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); - - /* Sanity checks */ - if (current_multiplier == 0 || max_multiplier == 0 - || min_multiplier == 0) - return -EINVAL; - if (current_multiplier > max_multiplier - || max_multiplier <= min_multiplier) - return -EINVAL; - if (current_voltage > 0x1f || max_voltage > 0x1f) - return -EINVAL; - if (max_voltage < min_voltage) - return -EINVAL; - - /* Calc FSB speed */ - fsb = cpu_khz / current_multiplier; - /* Calc number of p-states supported */ - if (brand == EPS_BRAND_C7M) - states = max_multiplier - min_multiplier + 1; - else - states = 2; - - /* Allocate private data and frequency table for current cpu */ - centaur = kzalloc(sizeof(struct eps_cpu_data) - + (states + 1) * sizeof(struct cpufreq_frequency_table), - GFP_KERNEL); - if (!centaur) - return -ENOMEM; - eps_cpu[0] = centaur; - - /* Copy basic values */ - centaur->fsb = fsb; - - /* Fill frequency and MSR value table */ - f_table = ¢aur->freq_table[0]; - if (brand != EPS_BRAND_C7M) { - f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; - f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; - f_table[2].frequency = CPUFREQ_TABLE_END; - } else { - k = 0; - step = ((max_voltage - min_voltage) * 256) - / (max_multiplier - min_multiplier); - for (i = min_multiplier; i <= max_multiplier; i++) { - voltage = (k * step) / 256 + min_voltage; - f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; - k++; - } - f_table[k].frequency = CPUFREQ_TABLE_END; - } - - policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ - policy->cur = fsb * current_multiplier; - - ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); - if (ret) { - kfree(centaur); - return ret; - } - - cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); - return 0; -} - -static int eps_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (eps_cpu[cpu] == NULL) - return -ENODEV; - centaur = eps_cpu[cpu]; - - /* Get max frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - /* Set max frequency */ - eps_set_state(centaur, cpu, hi & 0xffff); - /* Bye */ - cpufreq_frequency_table_put_attr(policy->cpu); - kfree(eps_cpu[cpu]); - eps_cpu[cpu] = NULL; - return 0; -} - -static struct freq_attr *eps_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver eps_driver = { - .verify = eps_verify, - .target = eps_target, - .init = eps_cpu_init, - .exit = eps_cpu_exit, - .get = eps_get, - .name = "e_powersaver", - .owner = THIS_MODULE, - .attr = eps_attr, -}; - -static int __init eps_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* This driver will work only on Centaur C7 processors with - * Enhanced SpeedStep/PowerSaver registers */ - if (c->x86_vendor != X86_VENDOR_CENTAUR - || c->x86 != 6 || c->x86_model < 10) - return -ENODEV; - if (!cpu_has(c, X86_FEATURE_EST)) - return -ENODEV; - - if (cpufreq_register_driver(&eps_driver)) - return -EINVAL; - return 0; -} - -static void __exit eps_exit(void) -{ - cpufreq_unregister_driver(&eps_driver); -} - -MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); -MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); -MODULE_LICENSE("GPL"); - -module_init(eps_init); -module_exit(eps_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c deleted file mode 100644 index c587db4..0000000 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * elanfreq: cpufreq driver for the AMD ELAN family - * - * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> - * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <linux/timex.h> -#include <linux/io.h> - -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ -#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ - -/* Module parameter */ -static int max_freq; - -struct s_elan_multiplier { - int clock; /* frequency in kHz */ - int val40h; /* PMU Force Mode register */ - int val80h; /* CPU Clock Speed Register */ -}; - -/* - * It is important that the frequencies - * are listed in ascending order here! - */ -static struct s_elan_multiplier elan_multiplier[] = { - {1000, 0x02, 0x18}, - {2000, 0x02, 0x10}, - {4000, 0x02, 0x08}, - {8000, 0x00, 0x00}, - {16000, 0x00, 0x02}, - {33000, 0x00, 0x04}, - {66000, 0x01, 0x04}, - {99000, 0x01, 0x05} -}; - -static struct cpufreq_frequency_table elanfreq_table[] = { - {0, 1000}, - {1, 2000}, - {2, 4000}, - {3, 8000}, - {4, 16000}, - {5, 33000}, - {6, 66000}, - {7, 99000}, - {0, CPUFREQ_TABLE_END}, -}; - - -/** - * elanfreq_get_cpu_frequency: determine current cpu speed - * - * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated - * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. - */ - -static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg; /* Clock Speed Register */ - - local_irq_disable(); - outb_p(0x80, REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); - local_irq_enable(); - - if ((clockspeed_reg & 0xE0) == 0xE0) - return 0; - - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) - return 66000; - else - return 99000; - } - - /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0) == 0xA0) - return 33000; - - return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; -} - - -/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state(unsigned int state) -{ - struct cpufreq_freqs freqs; - - freqs.old = elanfreq_get_cpu_frequency(0); - freqs.new = elan_multiplier[state].clock; - freqs.cpu = 0; /* elanfreq.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", - elan_multiplier[state].clock); - - - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) - * - */ - - /* - * 0x40 is the Power Management Unit's Force Mode Register. - * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) - */ - - local_irq_disable(); - outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00, REG_CSCDR); - local_irq_enable(); /* wait till internal pipelines and */ - udelay(1000); /* buffers have cleaned up */ - - local_irq_disable(); - - /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80, REG_CSCIR); - outb_p(elan_multiplier[state].val80h, REG_CSCDR); - - /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40, REG_CSCIR); - outb_p(elan_multiplier[state].val40h, REG_CSCDR); - udelay(10000); - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - - -/** - * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int elanfreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); -} - -static int elanfreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int elanfreq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int i; - int result; - - /* capability check */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) - return -ENODEV; - - /* max freq */ - if (!max_freq) - max_freq = elanfreq_get_cpu_frequency(0); - - /* table init */ - for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if (elanfreq_table[i].frequency > max_freq) - elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = elanfreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - return 0; -} - - -static int elanfreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -#ifndef MODULE -/** - * elanfreq_setup - elanfreq command line parameter parsing - * - * elanfreq command line parameter. Use: - * elanfreq=66000 - * to set the maximum CPU frequency to 66 MHz. Note that in - * case you do not give this boot parameter, the maximum - * frequency will fall back to _current_ CPU frequency which - * might be lower. If you build this as a module, use the - * max_freq module parameter instead. - */ -static int __init elanfreq_setup(char *str) -{ - max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); - return 1; -} -__setup("elanfreq=", elanfreq_setup); -#endif - - -static struct freq_attr *elanfreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, - .init = elanfreq_cpu_init, - .exit = elanfreq_cpu_exit, - .name = "elanfreq", - .owner = THIS_MODULE, - .attr = elanfreq_attr, -}; - - -static int __init elanfreq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* Test if we have the right hardware */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) { - printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; - } - return cpufreq_register_driver(&elanfreq_driver); -} - - -static void __exit elanfreq_exit(void) -{ - cpufreq_unregister_driver(&elanfreq_driver); -} - - -module_param(max_freq, int, 0444); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " - "Sven Geggus <sven@geggus.net>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); - -module_init(elanfreq_init); -module_exit(elanfreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c deleted file mode 100644 index 32974cf..0000000 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * Cyrix MediaGX and NatSemi Geode Suspend Modulation - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Hiroshi Miura <miura@da-cha.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Theoretical note: - * - * (see Geode(tm) CS5530 manual (rev.4.1) page.56) - * - * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Modulation. - * - * Suspend Modulation works by asserting and de-asserting the SUSP# pin - * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is - * asserted then power consumption is reduced. - * - * Suspend Modulation's OFF/ON duration are configurable - * with 'Suspend Modulation OFF Count Register' - * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of - * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) - * to the processor. - * - * These counters define a ratio which is the effective frequency - * of operation of the system. - * - * OFF Count - * F_eff = Fgx * ---------------------- - * OFF Count + ON Count - * - * 0 <= On Count, Off Count <= 255 - * - * From these limits, we can get register values - * - * off_duration + on_duration <= MAX_DURATION - * on_duration = off_duration * (stock_freq - freq) / freq - * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration - * - * - *--------------------------------------------------------------------------- - * - * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. - * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and - * NatSemi Geode Cs5530(A). - * - * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * - cs5530_mod patch for 2.4.19-rc1. - * - *--------------------------------------------------------------------------- - * - * Todo - * Test on machines with 5510, 5530, 5530A - */ - -/************************************************************************ - * Suspend Modulation - Definitions * - ************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/slab.h> - -#include <asm/processor-cyrix.h> - -/* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ - -/* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ - -/* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the below is supported only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ - -struct gxfreq_params { - u8 on_duration; - u8 off_duration; - u8 pci_suscfg; - u8 pci_pmer1; - u8 pci_pmer2; - struct pci_dev *cs55x0; -}; - -static struct gxfreq_params *gx_params; -static int stock_freq; - -/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk; -module_param(pci_busclk, int, 0444); - -/* maximum duration for which the cpu may be suspended - * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. - * Note that this leads to a maximum of 8 ms(!) where the CPU clock - * is suspended -- processing power is just 0.39% of what it used to be, - * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ -static int max_duration = 255; -module_param(max_duration, int, 0444); - -/* For the default policy, we want at least some processing power - * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) - */ -#define POLICY_MIN_DIV 20 - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "gx-suspmod", msg) - -/** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 - * of 33.3MHz - **/ -static int gx_freq_mult[16] = { - 4, 10, 4, 6, 9, 5, 7, 8, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - - -/**************************************************************** - * Low Level chipset interface * - ****************************************************************/ -static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, - { 0, }, -}; - -static void gx_write_byte(int reg, int value) -{ - pci_write_config_byte(gx_params->cs55x0, reg, value); -} - -/** - * gx_detect_chipset: - * - **/ -static __init struct pci_dev *gx_detect_chipset(void) -{ - struct pci_dev *gx_pci = NULL; - - /* check if CPU is a MediaGX or a Geode. */ - if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) && - (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { - dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; - } - - /* detect which companion chip is used */ - for_each_pci_dev(gx_pci) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) - return gx_pci; - } - - dprintk("error: no supported chipset found!\n"); - return NULL; -} - -/** - * gx_get_cpuspeed: - * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi - * Geode CPU runs. - */ -static unsigned int gx_get_cpuspeed(unsigned int cpu) -{ - if ((gx_params->pci_suscfg & SUSMOD) == 0) - return stock_freq; - - return (stock_freq * gx_params->off_duration) - / (gx_params->on_duration + gx_params->off_duration); -} - -/** - * gx_validate_speed: - * determine current cpu speed - * - **/ - -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, - u8 *off_duration) -{ - unsigned int i; - u8 tmp_on, tmp_off; - int old_tmp_freq = stock_freq; - int tmp_freq; - - *off_duration = 1; - *on_duration = 0; - - for (i = max_duration; i > 0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; - tmp_on = i - tmp_off; - tmp_freq = (stock_freq * tmp_off) / i; - /* if this relation is closer to khz, use this. If it's equal, - * prefer it, too - lower latency */ - if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { - *on_duration = tmp_on; - *off_duration = tmp_off; - old_tmp_freq = tmp_freq; - } - } - - return old_tmp_freq; -} - - -/** - * gx_set_cpuspeed: - * set cpu speed in khz. - **/ - -static void gx_set_cpuspeed(unsigned int khz) -{ - u8 suscfg, pmer1; - unsigned int new_khz; - unsigned long flags; - struct cpufreq_freqs freqs; - - freqs.cpu = 0; - freqs.old = gx_get_cpuspeed(0); - - new_khz = gx_validate_speed(khz, &gx_params->on_duration, - &gx_params->off_duration); - - freqs.new = new_khz; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - - - - if (new_khz != stock_freq) { - /* if new khz == 100% of CPU speed, it is special case */ - switch (gx_params->cs55x0->device) { - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; - /* FIXME: need to test other values -- Zwane,Miura */ - /* typical 2 to 4ms */ - gx_write_byte(PCI_IRQTC, 4); - /* typical 50 to 100ms */ - gx_write_byte(PCI_VIDTC, 100); - gx_write_byte(PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { - /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg|SUSMOD; - } else { - /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; - } - break; - case PCI_DEVICE_ID_CYRIX_5520: - case PCI_DEVICE_ID_CYRIX_5510: - suscfg = gx_params->pci_suscfg | SUSMOD; - break; - default: - local_irq_restore(flags); - dprintk("fatal: try to set unknown chipset.\n"); - return; - } - } else { - suscfg = gx_params->pci_suscfg & ~(SUSMOD); - gx_params->off_duration = 0; - gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); - } - - gx_write_byte(PCI_MODOFF, gx_params->off_duration); - gx_write_byte(PCI_MODON, gx_params->on_duration); - - gx_write_byte(PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - - local_irq_restore(flags); - - gx_params->pci_suscfg = suscfg; - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); -} - -/**************************************************************** - * High level functions * - ****************************************************************/ - -/* - * cpufreq_gx_verify: test if frequency range is valid - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int cpufreq_gx_verify(struct cpufreq_policy *policy) -{ - unsigned int tmp_freq = 0; - u8 tmp1, tmp2; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - /* it needs to be assured that at least one supported frequency is - * within policy->min and policy->max. If it is not, policy->max - * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a - * specific processing capacity. - */ - tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) - tmp_freq += stock_freq / max_duration; - policy->min = tmp_freq; - if (policy->min > policy->max) - policy->max = tmp_freq; - tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); - if (tmp_freq > policy->max) - tmp_freq -= stock_freq / max_duration; - policy->max = tmp_freq; - if (policy->max < policy->min) - policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - return 0; -} - -/* - * cpufreq_gx_target: - * - */ -static int cpufreq_gx_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - u8 tmp1, tmp2; - unsigned int tmp_freq; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - - tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); - while (tmp_freq < policy->min) { - tmp_freq += stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - while (tmp_freq > policy->max) { - tmp_freq -= stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - - gx_set_cpuspeed(tmp_freq); - - return 0; -} - -static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int maxfreq, curfreq; - - if (!policy || policy->cpu != 0) - return -ENODEV; - - /* determine maximum frequency */ - if (pci_busclk) - maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - else if (cpu_khz) - maxfreq = cpu_khz; - else - maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - - stock_freq = maxfreq; - curfreq = gx_get_cpuspeed(0); - - dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n", curfreq); - - /* setup basic struct for cpufreq API */ - policy->cpu = 0; - - if (max_duration < POLICY_MIN_DIV) - policy->min = maxfreq / max_duration; - else - policy->min = maxfreq / POLICY_MIN_DIV; - policy->max = maxfreq; - policy->cur = curfreq; - policy->cpuinfo.min_freq = maxfreq / max_duration; - policy->cpuinfo.max_freq = maxfreq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - - return 0; -} - -/* - * cpufreq_gx_init: - * MediaGX/Geode GX initialize cpufreq driver - */ -static struct cpufreq_driver gx_suspmod_driver = { - .get = gx_get_cpuspeed, - .verify = cpufreq_gx_verify, - .target = cpufreq_gx_target, - .init = cpufreq_gx_cpu_init, - .name = "gx-suspmod", - .owner = THIS_MODULE, -}; - -static int __init cpufreq_gx_init(void) -{ - int ret; - struct gxfreq_params *params; - struct pci_dev *gx_pci; - - /* Test if we have the right hardware */ - gx_pci = gx_detect_chipset(); - if (gx_pci == NULL) - return -ENODEV; - - /* check whether module parameters are sane */ - if (max_duration > 0xff) - max_duration = 0xff; - - dprintk("geode suspend modulation available.\n"); - - params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); - if (params == NULL) - return -ENOMEM; - - params->cs55x0 = gx_pci; - gx_params = params; - - /* keep cs55x0 configurations */ - pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); - pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); - pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); - pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, - &(params->off_duration)); - - ret = cpufreq_register_driver(&gx_suspmod_driver); - if (ret) { - kfree(params); - return ret; /* register error! */ - } - - return 0; -} - -static void __exit cpufreq_gx_exit(void) -{ - cpufreq_unregister_driver(&gx_suspmod_driver); - pci_dev_put(gx_params->cs55x0); - kfree(gx_params); -} - -MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE("GPL"); - -module_init(cpufreq_gx_init); -module_exit(cpufreq_gx_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c deleted file mode 100644 index cf48cdd..0000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ /dev/null @@ -1,1029 +0,0 @@ -/* - * (C) 2001-2004 Dave Jones. <davej@redhat.com> - * (C) 2002 Padraig Brady. <padraig@antefacto.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by VIA. - * - * VIA have currently 3 different versions of Longhaul. - * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. - * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is backward compatible with v1, but adds - * LONGHAUL MSR for purpose of both frequency and voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). - * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use only the POWERSAVER MSR at 0x110a. - * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. - * It's pretty much the same feature wise to longhaul v2, though - * there is provision for scaling FSB too, but this doesn't work - * too well in practice so we don't even try to use this. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/acpi.h> - -#include <asm/msr.h> -#include <acpi/processor.h> - -#include "longhaul.h" - -#define PFX "longhaul: " - -#define TYPE_LONGHAUL_V1 1 -#define TYPE_LONGHAUL_V2 2 -#define TYPE_POWERSAVER 3 - -#define CPU_SAMUEL 1 -#define CPU_SAMUEL2 2 -#define CPU_EZRA 3 -#define CPU_EZRA_T 4 -#define CPU_NEHEMIAH 5 -#define CPU_NEHEMIAH_C 6 - -/* Flags */ -#define USE_ACPI_C3 (1 << 1) -#define USE_NORTHBRIDGE (1 << 2) - -static int cpu_model; -static unsigned int numscales = 16; -static unsigned int fsb; - -static const struct mV_pos *vrm_mV_table; -static const unsigned char *mV_vrm_table; - -static unsigned int highest_speed, lowest_speed; /* kHz */ -static unsigned int minmult, maxmult; -static int can_scale_voltage; -static struct acpi_processor *pr; -static struct acpi_processor_cx *cx; -static u32 acpi_regs_addr; -static u8 longhaul_flags; -static unsigned int longhaul_index; - -/* Module parameters */ -static int scale_voltage; -static int disable_acpi_c3; -static int revid_errata; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longhaul", msg) - - -/* Clock ratios multiplied by 10 */ -static int mults[32]; -static int eblcr[32]; -static int longhaul_version; -static struct cpufreq_frequency_table *longhaul_table; - -#ifdef CONFIG_CPU_FREQ_DEBUG -static char speedbuffer[8]; - -static char *print_speed(int speed) -{ - if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); - return speedbuffer; - } - - if (speed%1000 == 0) - snprintf(speedbuffer, sizeof(speedbuffer), - "%dGHz", speed/1000); - else - snprintf(speedbuffer, sizeof(speedbuffer), - "%d.%dGHz", speed/1000, (speed%1000)/100); - - return speedbuffer; -} -#endif - - -static unsigned int calc_speed(int mult) -{ - int khz; - khz = (mult/10)*fsb; - if (mult%10) - khz += fsb/2; - khz *= 1000; - return khz; -} - - -static int longhaul_get_cpu_mult(void) -{ - unsigned long invalue = 0, lo, hi; - - rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; - if (longhaul_version == TYPE_LONGHAUL_V2 || - longhaul_version == TYPE_POWERSAVER) { - if (lo & (1<<27)) - invalue += 16; - } - return eblcr[invalue]; -} - -/* For processor with BCR2 MSR */ - -static void do_longhaul1(unsigned int mults_index) -{ - union msr_bcr2 bcr2; - - rdmsrl(MSR_VIA_BCR2, bcr2.val); - /* Enable software clock multiplier */ - bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = mults_index & 0xff; - - /* Sync to timer tick */ - safe_halt(); - /* Change frequency on next halt or sleep */ - wrmsrl(MSR_VIA_BCR2, bcr2.val); - /* Invoke transition */ - ACPI_FLUSH_CPU_CACHE(); - halt(); - - /* Disable software clock multiplier */ - local_irq_disable(); - rdmsrl(MSR_VIA_BCR2, bcr2.val); - bcr2.bits.ESOFTBF = 0; - wrmsrl(MSR_VIA_BCR2, bcr2.val); -} - -/* For processor with Longhaul MSR */ - -static void do_powersaver(int cx_address, unsigned int mults_index, - unsigned int dir) -{ - union msr_longhaul longhaul; - u32 t; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Setup new frequency */ - if (!revid_errata) - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; - else - longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = mults_index & 0xf; - longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; - /* Setup new voltage */ - if (can_scale_voltage) - longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; - /* Sync to timer tick */ - safe_halt(); - /* Raise voltage if necessary */ - if (can_scale_voltage && dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } - - /* Change frequency on next halt or sleep */ - longhaul.bits.EnableSoftBusRatio = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - /* Disable bus ratio bit */ - longhaul.bits.EnableSoftBusRatio = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - - /* Reduce voltage if necessary */ - if (can_scale_voltage && !dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } -} - -/** - * longhaul_set_cpu_frequency() - * @mults_index : bitpattern of the new multiplier. - * - * Sets a new clock ratio. - */ - -static void longhaul_setstate(unsigned int table_index) -{ - unsigned int mults_index; - int speed, mult; - struct cpufreq_freqs freqs; - unsigned long flags; - unsigned int pic1_mask, pic2_mask; - u16 bm_status = 0; - u32 bm_timeout = 1000; - unsigned int dir = 0; - - mults_index = longhaul_table[table_index].index; - /* Safety precautions */ - mult = mults[mults_index & 0x1f]; - if (mult == -1) - return; - speed = calc_speed(mult); - if ((speed > highest_speed) || (speed < lowest_speed)) - return; - /* Voltage transition before frequency transition? */ - if (can_scale_voltage && longhaul_index < table_index) - dir = 1; - - freqs.old = calc_speed(longhaul_get_cpu_mult()); - freqs.new = speed; - freqs.cpu = 0; /* longhaul.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", - fsb, mult/10, mult%10, print_speed(speed/1000)); -retry_loop: - preempt_disable(); - local_irq_save(flags); - - pic2_mask = inb(0xA1); - pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF, 0xA1); /* Overkill */ - outb(0xFE, 0x21); /* TMR0 only */ - - /* Wait while PCI bus is busy. */ - if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE - || ((pr != NULL) && pr->flags.bm_control))) { - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - while (bm_status && bm_timeout) { - outw(1 << 4, acpi_regs_addr); - bm_timeout--; - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - } - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Disable AGP and PCI arbiters */ - outb(3, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); - } - switch (longhaul_version) { - - /* - * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) - * Software controlled multipliers only. - */ - case TYPE_LONGHAUL_V1: - do_longhaul1(mults_index); - break; - - /* - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] - * - * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * Nehemiah can do FSB scaling too, but this has never been proven - * to work in practice. - */ - case TYPE_LONGHAUL_V2: - case TYPE_POWERSAVER: - if (longhaul_flags & USE_ACPI_C3) { - /* Don't allow wakeup */ - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, mults_index, dir); - } else { - do_powersaver(0, mults_index, dir); - } - break; - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Enable arbiters */ - outb(0, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Enable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); - } - outb(pic2_mask, 0xA1); /* restore mask */ - outb(pic1_mask, 0x21); - - local_irq_restore(flags); - preempt_enable(); - - freqs.new = calc_speed(longhaul_get_cpu_mult()); - /* Check if requested frequency is set. */ - if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); - /* Revision ID = 1 but processor is expecting revision key - * equal to 0. Jumpers at the bottom of processor will change - * multiplier and FSB, but will not change bits in Longhaul - * MSR nor enable voltage scaling. */ - if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); - revid_errata = 1; - msleep(200); - goto retry_loop; - } - /* Why ACPI C3 sometimes doesn't work is a mystery for me. - * But it does happen. Processor is entering ACPI C3 state, - * but it doesn't change frequency. I tried poking various - * bits in northbridge registers, but without success. */ - if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); - longhaul_flags &= ~USE_ACPI_C3; - if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); - revid_errata = 0; - } - msleep(200); - goto retry_loop; - } - /* This shouldn't happen. Longhaul ver. 2 was reported not - * working on processors without voltage scaling, but with - * RevID = 1. RevID errata will make things right. Just - * to be 100% sure. */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); - longhaul_version = TYPE_LONGHAUL_V1; - msleep(200); - goto retry_loop; - } - } - /* Report true CPU frequency */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); -} - -/* - * Centaur decided to make life a little more tricky. - * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. - * Samuel2 and above have to try and guess what the FSB is. - * We do this by assuming we booted at maximum multiplier, and interpolate - * between that value multiplied by possible FSBs and cpu_mhz which - * was calculated at boot time. Really ugly, but no other way to do this. - */ - -#define ROUNDING 0xf - -static int guess_fsb(int mult) -{ - int speed = cpu_khz / 1000; - int i; - int speeds[] = { 666, 1000, 1333, 2000 }; - int f_max, f_min; - - for (i = 0; i < 4; i++) { - f_max = ((speeds[i] * mult) + 50) / 100; - f_max += (ROUNDING / 2); - f_min = f_max - ROUNDING; - if ((speed <= f_max) && (speed >= f_min)) - return speeds[i] / 10; - } - return 0; -} - - -static int __cpuinit longhaul_get_ranges(void) -{ - unsigned int i, j, k = 0; - unsigned int ratio; - int mult; - - /* Get current frequency */ - mult = longhaul_get_cpu_mult(); - if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); - return -EINVAL; - } - fsb = guess_fsb(mult); - if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - /* Get max multiplier - as we always did. - * Longhaul MSR is useful only when voltage scaling is enabled. - * C3 is booting at max anyway. */ - maxmult = mult; - /* Get min multiplier */ - switch (cpu_model) { - case CPU_NEHEMIAH: - minmult = 50; - break; - case CPU_NEHEMIAH_C: - minmult = 40; - break; - default: - minmult = 30; - break; - } - - dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", - minmult/10, minmult%10, maxmult/10, maxmult%10); - - highest_speed = calc_speed(maxmult); - lowest_speed = calc_speed(minmult); - dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), - print_speed(highest_speed/1000)); - - if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); - return -EINVAL; - } - if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", - lowest_speed, highest_speed); - return -EINVAL; - } - - longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), - GFP_KERNEL); - if (!longhaul_table) - return -ENOMEM; - - for (j = 0; j < numscales; j++) { - ratio = mults[j]; - if (ratio == -1) - continue; - if (ratio > maxmult || ratio < minmult) - continue; - longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; - k++; - } - if (k <= 1) { - kfree(longhaul_table); - return -ENODEV; - } - /* Sort */ - for (j = 0; j < k - 1; j++) { - unsigned int min_f, min_i; - min_f = longhaul_table[j].frequency; - min_i = j; - for (i = j + 1; i < k; i++) { - if (longhaul_table[i].frequency < min_f) { - min_f = longhaul_table[i].frequency; - min_i = i; - } - } - if (min_i != j) { - swap(longhaul_table[j].frequency, - longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); - } - } - - longhaul_table[k].frequency = CPUFREQ_TABLE_END; - - /* Find index we are running on */ - for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { - longhaul_index = j; - break; - } - } - return 0; -} - - -static void __cpuinit longhaul_setup_voltagescaling(void) -{ - union msr_longhaul longhaul; - struct mV_pos minvid, maxvid, vid; - unsigned int j, speed, pos, kHz_step, numvscales; - int min_vid_speed; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); - return; - } - - if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); - vrm_mV_table = &vrm85_mV[0]; - mV_vrm_table = &mV_vrm85[0]; - } else { - printk(KERN_INFO PFX "Mobile VRM\n"); - if (cpu_model < CPU_NEHEMIAH) - return; - vrm_mV_table = &mobilevrm_mV[0]; - mV_vrm_table = &mV_mobilevrm[0]; - } - - minvid = vrm_mV_table[longhaul.bits.MinimumVID]; - maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - - if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - /* How many voltage steps*/ - numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", - maxvid.mV/1000, maxvid.mV%1000, - minvid.mV/1000, minvid.mV%1000, - numvscales); - - /* Calculate max frequency at min voltage */ - j = longhaul.bits.MinMHzBR; - if (longhaul.bits.MinMHzBR4) - j += 16; - min_vid_speed = eblcr[j]; - if (min_vid_speed == -1) - return; - switch (longhaul.bits.MinMHzFSB) { - case 0: - min_vid_speed *= 13333; - break; - case 1: - min_vid_speed *= 10000; - break; - case 3: - min_vid_speed *= 6666; - break; - default: - return; - break; - } - if (min_vid_speed >= highest_speed) - return; - /* Calculate kHz for one voltage step */ - kHz_step = (highest_speed - min_vid_speed) / numvscales; - - j = 0; - while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { - speed = longhaul_table[j].frequency; - if (speed > min_vid_speed) - pos = (speed - min_vid_speed) / kHz_step + minvid.pos; - else - pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; - vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", - speed, j, vid.mV); - j++; - } - - can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); -} - - -static int longhaul_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, longhaul_table); -} - - -static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int table_index = 0; - unsigned int i; - unsigned int dir = 0; - u8 vid, current_vid; - - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, - relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - - if (!can_scale_voltage) - longhaul_setstate(table_index); - else { - /* On test system voltage transitions exceeding single - * step up or down were turning motherboard off. Both - * "ondemand" and "userspace" are unsafe. C7 is doing - * this in hardware, C3 is old and we need to do this - * in software. */ - i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); - current_vid &= 0x1f; - if (table_index > longhaul_index) - dir = 1; - while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; - if (vid != current_vid) { - longhaul_setstate(i); - current_vid = vid; - msleep(200); - } - if (dir) - i++; - else - i--; - } - longhaul_setstate(table_index); - } - longhaul_index = table_index; - return 0; -} - - -static unsigned int longhaul_get(unsigned int cpu) -{ - if (cpu) - return 0; - return calc_speed(longhaul_get_cpu_mult()); -} - -static acpi_status longhaul_walk_callback(acpi_handle obj_handle, - u32 nesting_level, - void *context, void **return_value) -{ - struct acpi_device *d; - - if (acpi_bus_get_device(obj_handle, &d)) - return 0; - - *return_value = acpi_driver_data(d); - return 1; -} - -/* VIA don't support PM2 reg, but have something similar */ -static int enable_arbiter_disable(void) -{ - struct pci_dev *dev; - int status = 1; - int reg; - u8 pci_cmd; - - /* Find PLE133 host bridge */ - reg = 0x78; - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, - NULL); - /* Find PM133/VT8605 host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8605_0, NULL); - /* Find CLE266 host bridge */ - if (dev == NULL) { - reg = 0x76; - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_862X_0, NULL); - /* Find CN400 V-Link host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); - } - if (dev != NULL) { - /* Enable access to port 0x22 */ - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - pci_cmd |= 1<<7; - pci_write_config_byte(dev, reg, pci_cmd); - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); - status = 0; - } - } - pci_dev_put(dev); - return status; - } - return 0; -} - -static int longhaul_setup_southbridge(void) -{ - struct pci_dev *dev; - u8 pci_cmd; - - /* Find VT8235 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); - if (dev == NULL) - /* Find VT8237 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8237, NULL); - if (dev != NULL) { - /* Set transition time to max */ - pci_read_config_byte(dev, 0xec, &pci_cmd); - pci_cmd &= ~(1 << 2); - pci_write_config_byte(dev, 0xec, pci_cmd); - pci_read_config_byte(dev, 0xe4, &pci_cmd); - pci_cmd &= ~(1 << 7); - pci_write_config_byte(dev, 0xe4, pci_cmd); - pci_read_config_byte(dev, 0xe5, &pci_cmd); - pci_cmd |= 1 << 7; - pci_write_config_byte(dev, 0xe5, pci_cmd); - /* Get address of ACPI registers block*/ - pci_read_config_byte(dev, 0x81, &pci_cmd); - if (pci_cmd & 1 << 7) { - pci_read_config_dword(dev, 0x88, &acpi_regs_addr); - acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); - } - - pci_dev_put(dev); - return 1; - } - return 0; -} - -static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname = NULL; - int ret; - u32 lo, hi; - - /* Check what we have on this motherboard */ - switch (c->x86_model) { - case 6: - cpu_model = CPU_SAMUEL; - cpuname = "C3 'Samuel' [C5A]"; - longhaul_version = TYPE_LONGHAUL_V1; - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); - break; - - case 7: - switch (c->x86_mask) { - case 0: - longhaul_version = TYPE_LONGHAUL_V1; - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had - * Samuel1 ratios. */ - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); - break; - case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V2; - if (c->x86_mask < 8) { - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - } else { - cpu_model = CPU_EZRA; - cpuname = "C3 'Ezra' [C5C]"; - } - memcpy(mults, ezra_mults, sizeof(ezra_mults)); - memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); - break; - } - break; - - case 8: - cpu_model = CPU_EZRA_T; - cpuname = "C3 'Ezra-T' [C5M]"; - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); - memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); - break; - - case 9: - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); - memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); - switch (c->x86_mask) { - case 0 ... 1: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5XLOE]"; - break; - case 2 ... 4: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5XLOH]"; - break; - case 5 ... 15: - cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5P]"; - break; - } - break; - - default: - cpuname = "Unknown"; - break; - } - /* Check Longhaul ver. 2 */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - rdmsr(MSR_VIA_LONGHAUL, lo, hi); - if (lo == 0 && hi == 0) - /* Looks like MSR isn't present */ - longhaul_version = TYPE_LONGHAUL_V1; - } - - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); - break; - case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); - break; - }; - - /* Doesn't hurt */ - longhaul_setup_southbridge(); - - /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, - NULL, (void *)&pr); - - /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { - cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) - longhaul_flags |= USE_ACPI_C3; - } - /* Disable if it isn't working */ - if (disable_acpi_c3) - longhaul_flags &= ~USE_ACPI_C3; - /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) - longhaul_flags |= USE_NORTHBRIDGE; - - /* Check ACPI support for bus master arbiter disable */ - if (!(longhaul_flags & USE_ACPI_C3 - || longhaul_flags & USE_NORTHBRIDGE) - && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); - return -ENODEV; - } - - if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); - if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); - - ret = longhaul_get_ranges(); - if (ret != 0) - return ret; - - if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) - longhaul_setup_voltagescaling(); - - policy->cpuinfo.transition_latency = 200000; /* nsec */ - policy->cur = calc_speed(longhaul_get_cpu_mult()); - - ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); - if (ret) - return ret; - - cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); - - return 0; -} - -static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *longhaul_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver longhaul_driver = { - .verify = longhaul_verify, - .target = longhaul_target, - .get = longhaul_get, - .init = longhaul_cpu_init, - .exit = __devexit_p(longhaul_cpu_exit), - .name = "longhaul", - .owner = THIS_MODULE, - .attr = longhaul_attr, -}; - - -static int __init longhaul_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) - return -ENODEV; - -#ifdef CONFIG_SMP - if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); - return -ENODEV; - } -#endif -#ifdef CONFIG_X86_IO_APIC - if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); - return -ENODEV; - } -#endif - switch (c->x86_model) { - case 6 ... 9: - return cpufreq_register_driver(&longhaul_driver); - case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); - default: - ; - } - - return -ENODEV; -} - - -static void __exit longhaul_exit(void) -{ - int i; - - for (i = 0; i < numscales; i++) { - if (mults[i] == maxmult) { - longhaul_setstate(i); - break; - } - } - - cpufreq_unregister_driver(&longhaul_driver); - kfree(longhaul_table); -} - -/* Even if BIOS is exporting ACPI C3 state, and it is used - * with success when CPU is idle, this state doesn't - * trigger frequency transition in some cases. */ -module_param(disable_acpi_c3, int, 0644); -MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very useful to save - * power, but most VIA C3 processors aren't supporting it. */ -module_param(scale_voltage, int, 0644); -MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -/* Force revision key to 0 for processors which doesn't - * support voltage scaling, but are introducing itself as - * such. */ -module_param(revid_errata, int, 0644); -MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE("GPL"); - -late_initcall(longhaul_init); -module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h deleted file mode 100644 index cbf48fb..0000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * longhaul.h - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * VIA-specific information - */ - -union msr_bcr2 { - struct { - unsigned Reseved:19, // 18:0 - ESOFTBF:1, // 19 - Reserved2:3, // 22:20 - CLOCKMUL:4, // 26:23 - Reserved3:5; // 31:27 - } bits; - unsigned long val; -}; - -union msr_longhaul { - struct { - unsigned RevisionID:4, // 3:0 - RevisionKey:4, // 7:4 - EnableSoftBusRatio:1, // 8 - EnableSoftVID:1, // 9 - EnableSoftBSEL:1, // 10 - Reserved:3, // 11:13 - SoftBusRatio4:1, // 14 - VRMRev:1, // 15 - SoftBusRatio:4, // 19:16 - SoftVID:5, // 24:20 - Reserved2:3, // 27:25 - SoftBSEL:2, // 29:28 - Reserved3:2, // 31:30 - MaxMHzBR:4, // 35:32 - MaximumVID:5, // 40:36 - MaxMHzFSB:2, // 42:41 - MaxMHzBR4:1, // 43 - Reserved4:4, // 47:44 - MinMHzBR:4, // 51:48 - MinimumVID:5, // 56:52 - MinMHzFSB:2, // 58:57 - MinMHzBR4:1, // 59 - Reserved5:4; // 63:60 - } bits; - unsigned long long val; -}; - -/* - * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr values specify the ratio read from the CPU. - * The mults values specify what to write to the CPU. - */ - -/* - * VIA C3 Samuel 1 & Samuel 2 (stepping 0) - */ -static const int __cpuinitdata samuel1_mults[16] = { - -1, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - -1, /* 0100 -> RESERVED */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - -1, /* 1111 -> RESERVED */ -}; - -static const int __cpuinitdata samuel1_eblcr[16] = { - 50, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - -1, /* 0111 -> RESERVED */ - -1, /* 1000 -> RESERVED */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - -1, /* 1100 -> RESERVED */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Samuel2 Stepping 1->15 - */ -static const int __cpuinitdata samuel2_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 110, /* 0111 -> 11.0x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 130, /* 1110 -> 13.0x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Ezra - */ -static const int __cpuinitdata ezra_mults[16] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata ezra_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 (Ezra-T) [C5M]. - */ -static const int __cpuinitdata ezrat_mults[32] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - - -1, /* 0000 -> RESERVED (10.0x) */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (9.0x)*/ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> RESERVED (12.0x) */ -}; - -static const int __cpuinitdata ezrat_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - - -1, /* 0000 -> RESERVED (9.0x) */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (10.0x)*/ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - -1, /* 1100 -> RESERVED (12.0x) */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145, /* 1111 -> 14.5x */ -}; - -/* - * VIA C3 Nehemiah */ - -static const int __cpuinitdata nehemiah_mults[32] = { - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - -1, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata nehemiah_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ -}; - -/* - * Voltage scales. Div/Mod by 1000 to get actual voltage. - * Which scale to use depends on the VRM type in use. - */ - -struct mV_pos { - unsigned short mV; - unsigned short pos; -}; - -static const struct mV_pos __cpuinitdata vrm85_mV[32] = { - {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, - {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, - {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, - {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, - {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, - {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, - {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, - {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} -}; - -static const unsigned char __cpuinitdata mV_vrm85[32] = { - 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, - 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, - 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, - 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 -}; - -static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = { - {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, - {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, - {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, - {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, - {975, 15}, {950, 14}, {925, 13}, {900, 12}, - {875, 11}, {850, 10}, {825, 9}, {800, 8}, - {775, 7}, {750, 6}, {725, 5}, {700, 4}, - {675, 3}, {650, 2}, {625, 1}, {600, 0} -}; - -static const unsigned char __cpuinitdata mV_mobilevrm[32] = { - 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, - 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, - 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, - 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 -}; - diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c deleted file mode 100644 index d9f5136..0000000 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> - -#include <asm/msr.h> -#include <asm/processor.h> - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longrun", msg) - -static struct cpufreq_driver longrun_driver; - -/** - * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz - * values into per cent values. In TMTA microcode, the following is valid: - * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - */ -static unsigned int longrun_low_freq, longrun_high_freq; - - -/** - * longrun_get_policy - get the current LongRun policy - * @policy: struct cpufreq_policy where current policy is written into - * - * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS - * and MSR_TMTA_LONGRUN_CTRL - */ -static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); - if (msr_lo & 0x01) - policy->policy = CPUFREQ_POLICY_PERFORMANCE; - else - policy->policy = CPUFREQ_POLICY_POWERSAVE; - - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); - msr_lo &= 0x0000007F; - msr_hi &= 0x0000007F; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - policy->min = policy->max = longrun_high_freq; - } else { - policy->min = longrun_low_freq + msr_lo * - ((longrun_high_freq - longrun_low_freq) / 100); - policy->max = longrun_low_freq + msr_hi * - ((longrun_high_freq - longrun_low_freq) / 100); - } - policy->cpu = 0; -} - - -/** - * longrun_set_policy - sets a new CPUFreq policy - * @policy: new policy - * - * Sets a new CPUFreq policy on LongRun-capable processors. This function - * has to be called with cpufreq_driver locked. - */ -static int longrun_set_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - u32 pctg_lo, pctg_hi; - - if (!policy) - return -EINVAL; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - pctg_lo = pctg_hi = 100; - } else { - pctg_lo = (policy->min - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - pctg_hi = (policy->max - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - } - - if (pctg_hi > 100) - pctg_hi = 100; - if (pctg_lo > pctg_hi) - pctg_lo = pctg_hi; - - /* performance or economy mode */ - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - msr_lo &= 0xFFFFFFFE; - switch (policy->policy) { - case CPUFREQ_POLICY_PERFORMANCE: - msr_lo |= 0x00000001; - break; - case CPUFREQ_POLICY_POWERSAVE: - break; - } - wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - - /* lower and upper boundary */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_lo |= pctg_lo; - msr_hi |= pctg_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - return 0; -} - - -/** - * longrun_verify_poliy - verifies a new CPUFreq policy - * @policy: the policy to verify - * - * Validates a new CPUFreq policy. This function has to be called with - * cpufreq_driver locked. - */ -static int longrun_verify_policy(struct cpufreq_policy *policy) -{ - if (!policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && - (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) - return -EINVAL; - - return 0; -} - -static unsigned int longrun_get(unsigned int cpu) -{ - u32 eax, ebx, ecx, edx; - - if (cpu) - return 0; - - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - dprintk("cpuid eax is %u\n", eax); - - return eax * 1000; -} - -/** - * longrun_determine_freqs - determines the lowest and highest possible core frequency - * @low_freq: an int to put the lowest frequency into - * @high_freq: an int to put the highest frequency into - * - * Determines the lowest and highest possible core frequencies on this CPU. - * This is necessary to calculate the performance percentage according to - * TMTA rules: - * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) - */ -static int __cpuinit longrun_determine_freqs(unsigned int *low_freq, - unsigned int *high_freq) -{ - u32 msr_lo, msr_hi; - u32 save_lo, save_hi; - u32 eax, ebx, ecx, edx; - u32 try_hi; - struct cpuinfo_x86 *c = &cpu_data(0); - - if (!low_freq || !high_freq) - return -EINVAL; - - if (cpu_has(c, X86_FEATURE_LRTI)) { - /* if the LongRun Table Interface is present, the - * detection is a bit easier: - * For minimum frequency, read out the maximum - * level (msr_hi), write that into "currently - * selected level", and read out the frequency. - * For maximum frequency, read out level zero. - */ - /* minimum */ - rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); - wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *low_freq = msr_lo * 1000; /* to kHz */ - - /* maximum */ - wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *high_freq = msr_lo * 1000; /* to kHz */ - - dprintk("longrun table interface told %u - %u kHz\n", - *low_freq, *high_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - return 0; - } - - /* set the upper border to the value determined during TSC init */ - *high_freq = (cpu_khz / 1000); - *high_freq = *high_freq * 1000; - dprintk("high frequency is %u kHz\n", *high_freq); - - /* get current borders */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - save_lo = msr_lo & 0x0000007F; - save_hi = msr_hi & 0x0000007F; - - /* if current perf_pctg is larger than 90%, we need to decrease the - * upper limit to make the calculation more accurate. - */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - /* try decreasing in 10% steps, some processors react only - * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { - /* set to 0 to try_hi perf_pctg */ - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_hi |= try_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - /* read out current core MHz and current perf_pctg */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - - /* restore values */ - wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); - } - dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); - - /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - * eqals - * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) - * - * high_freq * perf_pctg is stored tempoarily into "ebx". - */ - ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ - - if ((ecx > 95) || (ecx == 0) || (eax < ebx)) - return -EIO; - - edx = ((eax - ebx) * 100) / (100 - ecx); - *low_freq = edx * 1000; /* back to kHz */ - - dprintk("low frequency is %u kHz\n", *low_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - - return 0; -} - - -static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* detect low and high frequency */ - result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); - if (result) - return result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = longrun_low_freq; - policy->cpuinfo.max_freq = longrun_high_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - longrun_get_policy(policy); - - return 0; -} - - -static struct cpufreq_driver longrun_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .verify = longrun_verify_policy, - .setpolicy = longrun_set_policy, - .get = longrun_get, - .init = longrun_cpu_init, - .name = "longrun", - .owner = THIS_MODULE, -}; - - -/** - * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver - * - * Initializes the LongRun support. - */ -static int __init longrun_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_TRANSMETA || - !cpu_has(c, X86_FEATURE_LONGRUN)) - return -ENODEV; - - return cpufreq_register_driver(&longrun_driver); -} - - -/** - * longrun_exit - unregisters LongRun support - */ -static void __exit longrun_exit(void) -{ - cpufreq_unregister_driver(&longrun_driver); -} - - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " - "Efficeon processors."); -MODULE_LICENSE("GPL"); - -module_init(longrun_init); -module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/arch/x86/kernel/cpu/cpufreq/mperf.c deleted file mode 100644 index 911e193..0000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.c +++ /dev/null @@ -1,51 +0,0 @@ -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> - -#include "mperf.h" - -static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf); - -/* Called via smp_call_function_single(), on the target CPU */ -static void read_measured_perf_ctrs(void *_cur) -{ - struct aperfmperf *am = _cur; - - get_aperfmperf(am); -} - -/* - * Return the measured active (C0) frequency on this CPU since last call - * to this function. - * Input: cpu number - * Return: Average CPU frequency in terms of max frequency (zero on error) - * - * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance - * over a period of time, while CPU is in C0 state. - * IA32_MPERF counts at the rate of max advertised frequency - * IA32_APERF counts at the rate of actual CPU frequency - * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and - * no meaning should be associated with absolute values of these MSRs. - */ -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu) -{ - struct aperfmperf perf; - unsigned long ratio; - unsigned int retval; - - if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1)) - return 0; - - ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf); - per_cpu(acfreq_old_perf, cpu) = perf; - - retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT; - - return retval; -} -EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/arch/x86/kernel/cpu/cpufreq/mperf.h deleted file mode 100644 index 5dbf295..0000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * (c) 2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c deleted file mode 100644 index 52c9364..0000000 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Pentium 4/Xeon CPU on demand clock modulation/speed scaling - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Arjan van de Ven <arjanv@redhat.com> - * (C) 2002 Tora T. Engstad - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Date Errata Description - * 20020525 N44, O17 12.5% or 25% DC causes lockup - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/cpumask.h> -#include <linux/timex.h> - -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/timer.h> - -#include "speedstep-lib.h" - -#define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "p4-clockmod", msg) - -/* - * Duty Cycle (3bits), note DC_DISABLE is not specified in - * intel docs i just use it to mean disable - */ -enum { - DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, - DC_64PT, DC_75PT, DC_88PT, DC_DISABLE -}; - -#define DC_ENTRIES 8 - - -static int has_N44_O17_errata[NR_CPUS]; -static unsigned int stock_freq; -static struct cpufreq_driver p4clockmod_driver; -static unsigned int cpufreq_p4_get(unsigned int cpu); - -static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) -{ - u32 l, h; - - if (!cpu_online(cpu) || - (newstate > DC_DISABLE) || (newstate == DC_RESV)) - return -EINVAL; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); - - if (l & 0x01) - dprintk("CPU#%d currently thermal throttled\n", cpu); - - if (has_N44_O17_errata[cpu] && - (newstate == DC_25PT || newstate == DC_DFLT)) - newstate = DC_38PT; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - if (newstate == DC_DISABLE) { - dprintk("CPU#%d disabling modulation\n", cpu); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); - } else { - dprintk("CPU#%d setting duty cycle to %d%%\n", - cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved - * bit 4 : enable/disable - * bits 3-1 : duty cycle - * bit 0 : reserved - */ - l = (l & ~14); - l = l | (1<<4) | ((newstate & 0x7)<<1); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); - } - - return 0; -} - - -static struct cpufreq_frequency_table p4clockmod_table[] = { - {DC_RESV, CPUFREQ_ENTRY_INVALID}, - {DC_DFLT, 0}, - {DC_25PT, 0}, - {DC_38PT, 0}, - {DC_50PT, 0}, - {DC_64PT, 0}, - {DC_75PT, 0}, - {DC_88PT, 0}, - {DC_DISABLE, 0}, - {DC_RESV, CPUFREQ_TABLE_END}, -}; - - -static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = DC_RESV; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; - - if (freqs.new == freqs.old) - return 0; - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - /* run on each logical CPU, - * see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 - */ - for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -static int cpufreq_p4_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); -} - - -static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x06) { - if (cpu_has(c, X86_FEATURE_EST)) - printk_once(KERN_WARNING PFX "Warning: EST-capable " - "CPU detected. The acpi-cpufreq module offers " - "voltage scaling in addition to frequency " - "scaling. You should use that instead of " - "p4-clockmod, if possible.\n"); - switch (c->x86_model) { - case 0x0E: /* Core */ - case 0x0F: /* Core Duo */ - case 0x16: /* Celeron Core */ - case 0x1C: /* Atom */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); - case 0x0D: /* Pentium M (Dothan) */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - /* fall through */ - case 0x09: /* Pentium M (Banias) */ - return speedstep_get_frequency(SPEEDSTEP_CPU_PM); - } - } - - if (c->x86 != 0xF) - return 0; - - /* on P-4s, the TSC runs with constant frequency independent whether - * throttling is active or not. */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); - return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); - } - - return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); -} - - - -static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - int cpuid = 0; - unsigned int i; - -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - - /* Errata workaround */ - cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; - switch (cpuid) { - case 0x0f07: - case 0x0f0a: - case 0x0f11: - case 0x0f12: - has_N44_O17_errata[policy->cpu] = 1; - dprintk("has errata -- disabling low frequencies\n"); - } - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && - c->x86_model < 2) { - /* switch to maximum frequency and measure result */ - cpufreq_p4_setdc(policy->cpu, DC_DISABLE); - recalibrate_cpu_khz(); - } - /* get max frequency */ - stock_freq = cpufreq_p4_get_frequency(c); - if (!stock_freq) - return -EINVAL; - - /* table init */ - for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i < 2) && (has_N44_O17_errata[policy->cpu])) - p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else - p4clockmod_table[i].frequency = (stock_freq * i)/8; - } - cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - - /* cpuinfo and default policy values */ - - /* the transition latency is set to be 1 higher than the maximum - * transition latency of the ondemand governor */ - policy->cpuinfo.transition_latency = 10000001; - policy->cur = stock_freq; - - return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); -} - - -static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int cpufreq_p4_get(unsigned int cpu) -{ - u32 l, h; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - - if (l & 0x10) { - l = l >> 1; - l &= 0x7; - } else - l = DC_DISABLE; - - if (l != DC_DISABLE) - return stock_freq * l / 8; - - return stock_freq; -} - -static struct freq_attr *p4clockmod_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, - .target = cpufreq_p4_target, - .init = cpufreq_p4_cpu_init, - .exit = cpufreq_p4_cpu_exit, - .get = cpufreq_p4_get, - .name = "p4-clockmod", - .owner = THIS_MODULE, - .attr = p4clockmod_attr, -}; - - -static int __init cpufreq_p4_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int ret; - - /* - * THERM_CONTROL is architectural for IA32 now, so - * we can rely on the capability checks - */ - if (c->x86_vendor != X86_VENDOR_INTEL) - return -ENODEV; - - if (!test_cpu_cap(c, X86_FEATURE_ACPI) || - !test_cpu_cap(c, X86_FEATURE_ACC)) - return -ENODEV; - - ret = cpufreq_register_driver(&p4clockmod_driver); - if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " - "Modulation available\n"); - - return ret; -} - - -static void __exit cpufreq_p4_exit(void) -{ - cpufreq_unregister_driver(&p4clockmod_driver); -} - - -MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE("GPL"); - -late_initcall(cpufreq_p4_init); -module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c deleted file mode 100644 index 755a31e..0000000 --- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface - * - * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> - * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. - * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON - * INFRINGEMENT. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#define PCC_VERSION "1.00.00" -#define POLL_LOOPS 300 - -#define CMD_COMPLETE 0x1 -#define CMD_GET_FREQ 0x0 -#define CMD_SET_FREQ 0x1 - -#define BUF_SZ 4 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "pcc-cpufreq", msg) - -struct pcc_register_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 bit_width; - u8 bit_offset; - u8 access_size; - u64 address; -} __attribute__ ((packed)); - -struct pcc_memory_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 resource_usage; - u8 type_specific; - u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; -} __attribute__ ((packed)); - -static struct cpufreq_driver pcc_cpufreq_driver; - -struct pcc_header { - u32 signature; - u16 length; - u8 major; - u8 minor; - u32 features; - u16 command; - u16 status; - u32 latency; - u32 minimum_time; - u32 maximum_time; - u32 nominal; - u32 throttled_frequency; - u32 minimum_frequency; -}; - -static void __iomem *pcch_virt_addr; -static struct pcc_header __iomem *pcch_hdr; - -static DEFINE_SPINLOCK(pcc_lock); - -static struct acpi_generic_address doorbell; - -static u64 doorbell_preserve; -static u64 doorbell_write; - -static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f, - 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; - -struct pcc_cpu { - u32 input_offset; - u32 output_offset; -}; - -static struct pcc_cpu __percpu *pcc_cpu_info; - -static int pcc_cpufreq_verify(struct cpufreq_policy *policy) -{ - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static inline void pcc_cmd(void) -{ - u64 doorbell_value; - int i; - - acpi_read(&doorbell_value, &doorbell); - acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, - &doorbell); - - for (i = 0; i < POLL_LOOPS; i++) { - if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) - break; - } -} - -static inline void pcc_clear_mapping(void) -{ - if (pcch_virt_addr) - iounmap(pcch_virt_addr); - pcch_virt_addr = NULL; -} - -static unsigned int pcc_get_freq(unsigned int cpu) -{ - struct pcc_cpu *pcc_cpu_data; - unsigned int curr_freq; - unsigned int freq_limit; - u16 status; - u32 input_buffer; - u32 output_buffer; - - spin_lock(&pcc_lock); - - dprintk("get: get_freq for CPU %d\n", cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - input_buffer = 0x1; - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_GET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - output_buffer = - ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("get: FAILED: for CPU %d, status is %d\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) - / 100) * 1000); - - dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is " - "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n", - cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), - output_buffer, curr_freq); - - freq_limit = (output_buffer >> 8) & 0xff; - if (freq_limit != 0xff) { - dprintk("get: frequency for cpu %d is being temporarily" - " capped at %d\n", cpu, curr_freq); - } - - spin_unlock(&pcc_lock); - return curr_freq; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return 0; -} - -static int pcc_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pcc_cpu *pcc_cpu_data; - struct cpufreq_freqs freqs; - u16 status; - u32 input_buffer; - int cpu; - - spin_lock(&pcc_lock); - cpu = policy->cpu; - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - dprintk("target: CPU %d should go to target freq: %d " - "(virtual) input_offset is 0x%x\n", - cpu, target_freq, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - - freqs.new = target_freq; - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - input_buffer = 0x1 | (((target_freq * 100) - / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_SET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("target: FAILED for cpu %d, with status: 0x%x\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("target: was SUCCESSFUL for cpu %d\n", cpu); - spin_unlock(&pcc_lock); - - return 0; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return -EINVAL; -} - -static int pcc_get_offset(int cpu) -{ - acpi_status status; - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *pccp, *offset; - struct pcc_cpu *pcc_cpu_data; - struct acpi_processor *pr; - int ret = 0; - - pr = per_cpu(processors, cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); - if (ACPI_FAILURE(status)) - return -ENODEV; - - pccp = buffer.pointer; - if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - }; - - offset = &(pccp->package.elements[0]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->input_offset = offset->integer.value; - - offset = &(pccp->package.elements[1]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->output_offset = offset->integer.value; - - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); - - dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data " - "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", - cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); -out_free: - kfree(buffer.pointer); - return ret; -} - -static int __init pcc_cpufreq_do_osc(acpi_handle *handle) -{ - acpi_status status; - struct acpi_object_list input; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object in_params[4]; - union acpi_object *out_obj; - u32 capabilities[2]; - u32 errors; - u32 supported; - int ret = 0; - - input.count = 4; - input.pointer = in_params; - in_params[0].type = ACPI_TYPE_BUFFER; - in_params[0].buffer.length = 16; - in_params[0].buffer.pointer = OSC_UUID; - in_params[1].type = ACPI_TYPE_INTEGER; - in_params[1].integer.value = 1; - in_params[2].type = ACPI_TYPE_INTEGER; - in_params[2].integer.value = 2; - in_params[3].type = ACPI_TYPE_BUFFER; - in_params[3].buffer.length = 8; - in_params[3].buffer.pointer = (u8 *)&capabilities; - - capabilities[0] = OSC_QUERY_ENABLE; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - - kfree(output.pointer); - capabilities[0] = 0x0; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - -out_free: - kfree(output.pointer); - return ret; -} - -static int __init pcc_cpufreq_probe(void) -{ - acpi_status status; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - struct pcc_memory_resource *mem_resource; - struct pcc_register_resource *reg_resource; - union acpi_object *out_obj, *member; - acpi_handle handle, osc_handle, pcch_handle; - int ret = 0; - - status = acpi_get_handle(NULL, "\\_SB", &handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "PCCH", &pcch_handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "_OSC", &osc_handle); - if (ACPI_SUCCESS(status)) { - ret = pcc_cpufreq_do_osc(&osc_handle); - if (ret) - dprintk("probe: _OSC evaluation did not succeed\n"); - /* Firmware's use of _OSC is optional */ - ret = 0; - } - - status = acpi_evaluate_object(handle, "PCCH", NULL, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - } - - member = &out_obj->package.elements[0]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; - - dprintk("probe: mem_resource descriptor: 0x%x," - " length: %d, space_id: %d, resource_usage: %d," - " type_specific: %d, granularity: 0x%llx," - " minimum: 0x%llx, maximum: 0x%llx," - " translation_offset: 0x%llx, address_length: 0x%llx\n", - mem_resource->descriptor, mem_resource->length, - mem_resource->space_id, mem_resource->resource_usage, - mem_resource->type_specific, mem_resource->granularity, - mem_resource->minimum, mem_resource->maximum, - mem_resource->translation_offset, - mem_resource->address_length); - - if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { - ret = -ENODEV; - goto out_free; - } - - pcch_virt_addr = ioremap_nocache(mem_resource->minimum, - mem_resource->address_length); - if (pcch_virt_addr == NULL) { - dprintk("probe: could not map shared mem region\n"); - goto out_free; - } - pcch_hdr = pcch_virt_addr; - - dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); - dprintk("probe: PCCH header is at physical address: 0x%llx," - " signature: 0x%x, length: %d bytes, major: %d, minor: %d," - " supported features: 0x%x, command field: 0x%x," - " status field: 0x%x, nominal latency: %d us\n", - mem_resource->minimum, ioread32(&pcch_hdr->signature), - ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), - ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), - ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), - ioread32(&pcch_hdr->latency)); - - dprintk("probe: min time between commands: %d us," - " max time between commands: %d us," - " nominal CPU frequency: %d MHz," - " minimum CPU frequency: %d MHz," - " minimum CPU frequency without throttling: %d MHz\n", - ioread32(&pcch_hdr->minimum_time), - ioread32(&pcch_hdr->maximum_time), - ioread32(&pcch_hdr->nominal), - ioread32(&pcch_hdr->throttled_frequency), - ioread32(&pcch_hdr->minimum_frequency)); - - member = &out_obj->package.elements[1]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto pcch_free; - } - - reg_resource = (struct pcc_register_resource *)member->buffer.pointer; - - doorbell.space_id = reg_resource->space_id; - doorbell.bit_width = reg_resource->bit_width; - doorbell.bit_offset = reg_resource->bit_offset; - doorbell.access_width = 64; - doorbell.address = reg_resource->address; - - dprintk("probe: doorbell: space_id is %d, bit_width is %d, " - "bit_offset is %d, access_width is %d, address is 0x%llx\n", - doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, - doorbell.access_width, reg_resource->address); - - member = &out_obj->package.elements[2]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_preserve = member->integer.value; - - member = &out_obj->package.elements[3]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_write = member->integer.value; - - dprintk("probe: doorbell_preserve: 0x%llx," - " doorbell_write: 0x%llx\n", - doorbell_preserve, doorbell_write); - - pcc_cpu_info = alloc_percpu(struct pcc_cpu); - if (!pcc_cpu_info) { - ret = -ENOMEM; - goto pcch_free; - } - - printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" - " limits: %d MHz, %d MHz\n", PCC_VERSION, - ioread32(&pcch_hdr->minimum_frequency), - ioread32(&pcch_hdr->nominal)); - kfree(output.pointer); - return ret; -pcch_free: - pcc_clear_mapping(); -out_free: - kfree(output.pointer); - return ret; -} - -static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - unsigned int result = 0; - - if (!pcch_virt_addr) { - result = -1; - goto out; - } - - result = pcc_get_offset(cpu); - if (result) { - dprintk("init: PCCP evaluation failed\n"); - goto out; - } - - policy->max = policy->cpuinfo.max_freq = - ioread32(&pcch_hdr->nominal) * 1000; - policy->min = policy->cpuinfo.min_freq = - ioread32(&pcch_hdr->minimum_frequency) * 1000; - policy->cur = pcc_get_freq(cpu); - - if (!policy->cur) { - dprintk("init: Unable to get current CPU frequency\n"); - result = -EINVAL; - goto out; - } - - dprintk("init: policy->max is %d, policy->min is %d\n", - policy->max, policy->min); -out: - return result; -} - -static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver pcc_cpufreq_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .get = pcc_get_freq, - .verify = pcc_cpufreq_verify, - .target = pcc_cpufreq_target, - .init = pcc_cpufreq_cpu_init, - .exit = pcc_cpufreq_cpu_exit, - .name = "pcc-cpufreq", - .owner = THIS_MODULE, -}; - -static int __init pcc_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - ret = pcc_cpufreq_probe(); - if (ret) { - dprintk("pcc_cpufreq_init: PCCH evaluation failed\n"); - return ret; - } - - ret = cpufreq_register_driver(&pcc_cpufreq_driver); - - return ret; -} - -static void __exit pcc_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pcc_cpufreq_driver); - - pcc_clear_mapping(); - - free_percpu(pcc_cpu_info); -} - -MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); -MODULE_VERSION(PCC_VERSION); -MODULE_DESCRIPTION("Processor Clocking Control interface driver"); -MODULE_LICENSE("GPL"); - -late_initcall(pcc_cpufreq_init); -module_exit(pcc_cpufreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c deleted file mode 100644 index b3379d6..0000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, - * Dominik Brodowski. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ - -#define PFX "powernow-k6: " -static unsigned int busfreq; /* FSB, in 10 kHz */ -static unsigned int max_multiplier; - - -/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ -static struct cpufreq_frequency_table clock_ratio[] = { - {45, /* 000 -> 4.5x */ 0}, - {50, /* 001 -> 5.0x */ 0}, - {40, /* 010 -> 4.0x */ 0}, - {55, /* 011 -> 5.5x */ 0}, - {20, /* 100 -> 2.0x */ 0}, - {30, /* 101 -> 3.0x */ 0}, - {60, /* 110 -> 6.0x */ 0}, - {35, /* 111 -> 3.5x */ 0}, - {0, CPUFREQ_TABLE_END} -}; - - -/** - * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier - * - * Returns the current setting of the frequency multiplier. Core clock - * speed is frequency of the Front-Side Bus multiplied with this value. - */ -static int powernow_k6_get_cpu_multiplier(void) -{ - u64 invalue = 0; - u32 msrval; - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - return clock_ratio[(invalue >> 5)&7].index; -} - - -/** - * powernow_k6_set_state - set the PowerNow! multiplier - * @best_i: clock_ratio[best_i] is the target multiplier - * - * Tries to change the PowerNow! multiplier - */ -static void powernow_k6_set_state(unsigned int best_i) -{ - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; - - if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR PFX "invalid target frequency\n"); - return; - } - - freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; - freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* we now need to transform best_i to the BVC format, see AMD#23446 */ - - outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5); - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - invalue = invalue & 0xf; - outvalue = outvalue | invalue; - outl(outvalue , (POWERNOW_IOPORT + 0x8)); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return; -} - - -/** - * powernow_k6_verify - verifies a new CPUfreq policy - * @policy: new policy - * - * Policy must be within lowest and highest possible CPU Frequency, - * and at least one possible state must be within min and max. - */ -static int powernow_k6_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); -} - - -/** - * powernow_k6_setpolicy - sets a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * sets a new CPUFreq policy - */ -static int powernow_k6_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], - target_freq, relation, &newstate)) - return -EINVAL; - - powernow_k6_set_state(newstate); - - return 0; -} - - -static int powernow_k6_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i, f; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - /* get frequencies */ - max_multiplier = powernow_k6_get_cpu_multiplier(); - busfreq = cpu_khz / max_multiplier; - - /* table init */ - for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; - if (f > max_multiplier) - clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; - else - clock_ratio[i].frequency = busfreq * f; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 200000; - policy->cur = busfreq * max_multiplier; - - result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); - if (result) - return result; - - cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); - - return 0; -} - - -static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int i; - for (i = 0; i < 8; i++) { - if (i == max_multiplier) - powernow_k6_set_state(i); - } - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int powernow_k6_get(unsigned int cpu) -{ - unsigned int ret; - ret = (busfreq * powernow_k6_get_cpu_multiplier()); - return ret; -} - -static struct freq_attr *powernow_k6_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, - .init = powernow_k6_cpu_init, - .exit = powernow_k6_cpu_exit, - .get = powernow_k6_get, - .name = "powernow-k6", - .owner = THIS_MODULE, - .attr = powernow_k6_attr, -}; - - -/** - * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver - * - * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported - * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero - * on success. - */ -static int __init powernow_k6_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || - ((c->x86_model != 12) && (c->x86_model != 13))) - return -ENODEV; - - if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); - return -EIO; - } - - if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region(POWERNOW_IOPORT, 16); - return -EINVAL; - } - - return 0; -} - - -/** - * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support - * - * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. - */ -static void __exit powernow_k6_exit(void) -{ - cpufreq_unregister_driver(&powernow_k6_driver); - release_region(POWERNOW_IOPORT, 16); -} - - -MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE("GPL"); - -module_init(powernow_k6_init); -module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c deleted file mode 100644 index 4a45fd6..0000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ /dev/null @@ -1,752 +0,0 @@ -/* - * AMD K7 Powernow driver. - * (C) 2003 Dave Jones on behalf of SuSE Labs. - * (C) 2003-2004 Dave Jones <davej@redhat.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Errata 5: - * CPU may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: - * CPU with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/dmi.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ -#include <asm/msr.h> -#include <asm/system.h> - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -#include <linux/acpi.h> -#include <acpi/processor.h> -#endif - -#include "powernow-k7.h" - -#define PFX "powernow: " - - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags; - u16 settlingtime; - u8 reserved1; - u8 numpst; -}; - -struct pst_s { - u32 cpuid; - u8 fsbspeed; - u8 maxfid; - u8 startvid; - u8 numpstates; -}; - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -union powernow_acpi_control_t { - struct { - unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; - } bits; - unsigned long val; -}; -#endif - -#ifdef CONFIG_CPU_FREQ_DEBUG -/* divide by 1000 to get VCore voltage in V. */ -static const int mobile_vid_table[32] = { - 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, - 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, - 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, - 1075, 1050, 1025, 1000, 975, 950, 925, 0, -}; -#endif - -/* divide by 10 to get FID. */ -static const int fid_codes[32] = { - 110, 115, 120, 125, 50, 55, 60, 65, - 70, 75, 80, 85, 90, 95, 100, 105, - 30, 190, 40, 200, 130, 135, 140, 210, - 150, 225, 160, 165, 170, 180, -1, -1, -}; - -/* This parameter is used in order to force ACPI instead of legacy method for - * configuration purpose. - */ - -static int acpi_force; - -static struct cpufreq_frequency_table *powernow_table; - -static unsigned int can_scale_bus; -static unsigned int can_scale_vid; -static unsigned int minimum_speed = -1; -static unsigned int maximum_speed; -static unsigned int number_scales; -static unsigned int fsb; -static unsigned int latency; -static char have_a0; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "powernow-k7", msg) - -static int check_fsb(unsigned int fsbspeed) -{ - int delta; - unsigned int f = fsb / 1000; - - delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return delta < 5; -} - -static int check_powernow(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int maxei, eax, ebx, ecx, edx; - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { -#ifdef MODULE - printk(KERN_INFO PFX "This module only works with " - "AMD K7 CPUs\n"); -#endif - return 0; - } - - /* Get maximum capabilities */ - maxei = cpuid_eax(0x80000000); - if (maxei < 0x80000007) { /* Any powernow info ? */ -#ifdef MODULE - printk(KERN_INFO PFX "No powernow capabilities detected\n"); -#endif - return 0; - } - - if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk(KERN_INFO PFX "K7 660[A0] core detected, " - "enabling errata workarounds\n"); - have_a0 = 1; - } - - cpuid(0x80000007, &eax, &ebx, &ecx, &edx); - - /* Check we can actually do something before we say anything.*/ - if (!(edx & (1 << 1 | 1 << 2))) - return 0; - - printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); - - if (edx & 1 << 1) { - printk("frequency"); - can_scale_bus = 1; - } - - if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk(" and "); - - if (edx & 1 << 2) { - printk("voltage"); - can_scale_vid = 1; - } - - printk(".\n"); - return 1; -} - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -static void invalidate_entry(unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} -#endif - -static int get_ranges(unsigned char *pst) -{ - unsigned int j; - unsigned int speed; - u8 fid, vid; - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) - return -ENOMEM; - - for (j = 0 ; j < number_scales; j++) { - fid = *pst++; - - powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ - - speed = powernow_table[j].frequency; - - if ((fid_codes[fid] % 10) == 5) { -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (have_a0 == 1) - invalidate_entry(j); -#endif - } - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - - vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - } - powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; - - return 0; -} - - -static void change_FID(int fid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.FID != fid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.FID = fid; - fidvidctl.bits.VIDC = 0; - fidvidctl.bits.FIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_VID(int vid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.VID != vid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.VID = vid; - fidvidctl.bits.FIDC = 0; - fidvidctl.bits.VIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_speed(unsigned int index) -{ - u8 fid, vid; - struct cpufreq_freqs freqs; - union msr_fidvidstatus fidvidstatus; - int cfid; - - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in powernow_decode_bios, - * vid are the upper 8 bits. - */ - - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; - - freqs.cpu = 0; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - freqs.old = fsb * fid_codes[cfid] / 10; - - freqs.new = powernow_table[index].frequency; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Now do the magic poking into the MSRs. */ - - if (have_a0 == 1) /* A0 errata 5 */ - local_irq_disable(); - - if (freqs.old > freqs.new) { - /* Going down, so change FID first */ - change_FID(fid); - change_VID(vid); - } else { - /* Going up, so change VID first */ - change_VID(vid); - change_FID(fid); - } - - - if (have_a0 == 1) - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -} - - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - -static struct acpi_processor_performance *acpi_processor_perf; - -static int powernow_acpi_init(void) -{ - int i; - int retval = 0; - union powernow_acpi_control_t pc; - - if (acpi_processor_perf != NULL && powernow_table != NULL) { - retval = -EINVAL; - goto err0; - } - - acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!acpi_processor_perf) { - retval = -ENOMEM; - goto err0; - } - - if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, - GFP_KERNEL)) { - retval = -ENOMEM; - goto err05; - } - - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { - retval = -EIO; - goto err1; - } - - if (acpi_processor_perf->control_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - if (acpi_processor_perf->status_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - number_scales = acpi_processor_perf->state_count; - - if (number_scales < 2) { - retval = -ENODEV; - goto err2; - } - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) { - retval = -ENOMEM; - goto err2; - } - - pc.val = (unsigned long) acpi_processor_perf->states[0].control; - for (i = 0; i < number_scales; i++) { - u8 fid, vid; - struct acpi_processor_px *state = - &acpi_processor_perf->states[i]; - unsigned int speed, speed_mhz; - - pc.val = (unsigned long) state->control; - dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", - i, - (u32) state->core_frequency, - (u32) state->power, - (u32) state->transition_latency, - (u32) state->control, - pc.bits.sgtc); - - vid = pc.bits.vid; - fid = pc.bits.fid; - - powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - - speed = powernow_table[i].frequency; - speed_mhz = speed / 1000; - - /* processor_perflib will multiply the MHz value by 1000 to - * get a KHz value (e.g. 1266000). However, powernow-k7 works - * with true KHz values (e.g. 1266768). To ensure that all - * powernow frequencies are available, we must ensure that - * ACPI doesn't restrict them, so we round up the MHz value - * to ensure that perflib's computed KHz value is greater than - * or equal to powernow's KHz value. - */ - if (speed % 1000 > 0) - speed_mhz++; - - if ((fid_codes[fid] % 10) == 5) { - if (have_a0 == 1) - invalidate_entry(i); - } - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed_mhz, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - - if (state->core_frequency != speed_mhz) { - state->core_frequency = speed_mhz; - dprintk(" Corrected ACPI frequency to %d\n", - speed_mhz); - } - - if (latency < pc.bits.sgtc) - latency = pc.bits.sgtc; - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - } - - powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - return 0; - -err2: - acpi_processor_unregister_performance(acpi_processor_perf, 0); -err1: - free_cpumask_var(acpi_processor_perf->shared_cpu_map); -err05: - kfree(acpi_processor_perf); -err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used on " - "this platform\n"); - acpi_processor_perf = NULL; - return retval; -} -#else -static int powernow_acpi_init(void) -{ - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); - return -EINVAL; -} -#endif - -static void print_pst_entry(struct pst_s *pst, unsigned int j) -{ - dprintk("PST:%d (@%p)\n", j, pst); - dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); -} - -static int powernow_decode_bios(int maxfid, int startvid) -{ - struct psb_s *psb; - struct pst_s *pst; - unsigned int i, j; - unsigned char *p; - unsigned int etuple; - unsigned int ret; - - etuple = cpuid_eax(0x80000001); - - for (i = 0xC0000; i < 0xffff0 ; i += 16) { - - p = phys_to_virt(i); - - if (memcmp(p, "AMDK7PNOW!", 10) == 0) { - dprintk("Found PSB header at %p\n", p); - psb = (struct psb_s *) p; - dprintk("Table version: 0x%x\n", psb->tableversion); - if (psb->tableversion != 0x12) { - printk(KERN_INFO PFX "Sorry, only v1.2 tables" - " supported right now\n"); - return -ENODEV; - } - - dprintk("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1) == 0) - dprintk("Mobile voltage regulator\n"); - else - dprintk("Desktop voltage regulator\n"); - - latency = psb->settlingtime; - if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time " - "to %d microseconds. " - "Should be at least 100. " - "Correcting.\n", latency); - latency = 100; - } - dprintk("Settling Time: %d microseconds.\n", - psb->settlingtime); - dprintk("Has %d PST tables. (Only dumping ones " - "relevant to this CPU).\n", - psb->numpst); - - p += sizeof(struct psb_s); - - pst = (struct pst_s *) p; - - for (j = 0; j < psb->numpst; j++) { - pst = (struct pst_s *) p; - number_scales = pst->numpstates; - - if ((etuple == pst->cpuid) && - check_fsb(pst->fsbspeed) && - (maxfid == pst->maxfid) && - (startvid == pst->startvid)) { - print_pst_entry(pst, j); - p = (char *)pst + sizeof(struct pst_s); - ret = get_ranges(p); - return ret; - } else { - unsigned int k; - p = (char *)pst + sizeof(struct pst_s); - for (k = 0; k < number_scales; k++) - p += 2; - } - } - printk(KERN_INFO PFX "No PST tables match this cpuid " - "(0x%x)\n", etuple); - printk(KERN_INFO PFX "This is indicative of a broken " - "BIOS.\n"); - - return -EINVAL; - } - p++; - } - - return -ENODEV; -} - - -static int powernow_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate; - - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, - relation, &newstate)) - return -EINVAL; - - change_speed(newstate); - - return 0; -} - - -static int powernow_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, powernow_table); -} - -/* - * We use the fact that the bus frequency is somehow - * a multiple of 100000/3 khz, then we compute sgtc according - * to this multiple. - * That way, we match more how AMD thinks all of that work. - * We will then get the same kind of behaviour already tested under - * the "well-known" other OS. - */ -static int __cpuinit fixup_sgtc(void) -{ - unsigned int sgtc; - unsigned int m; - - m = fsb / 3333; - if ((m % 10) >= 5) - m += 5; - - m /= 10; - - sgtc = 100 * m * latency; - sgtc = sgtc / 3; - if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); - sgtc = 0xfffff; - } - return sgtc; -} - -static unsigned int powernow_get(unsigned int cpu) -{ - union msr_fidvidstatus fidvidstatus; - unsigned int cfid; - - if (cpu) - return 0; - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - - return fsb * fid_codes[cfid] / 10; -} - - -static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d) -{ - printk(KERN_WARNING PFX - "%s laptop with broken PST tables in BIOS detected.\n", - d->ident); - printk(KERN_WARNING PFX - "You need to downgrade to 3A21 (09/09/2002), or try a newer " - "BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING PFX - "cpufreq scaling has been disabled as a result of this.\n"); - return 0; -} - -/* - * Some Athlon laptops have really fucked PST tables. - * A BIOS update is all that can save them. - * Mention this, and disable cpufreq. - */ -static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = { - { - .callback = acer_cpufreq_pst, - .ident = "Acer Aspire", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), - DMI_MATCH(DMI_BIOS_VERSION, "3A71"), - }, - }, - { } -}; - -static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy) -{ - union msr_fidvidstatus fidvidstatus; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - - recalibrate_cpu_khz(); - - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; - if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); - return -EINVAL; - } - dprintk("FSB: %3dMHz\n", fsb/1000); - - if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk(KERN_INFO PFX "PSB/PST known to be broken. " - "Trying ACPI instead\n"); - result = powernow_acpi_init(); - } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, - fidvidstatus.bits.SVID); - if (result) { - printk(KERN_INFO PFX "Trying ACPI perflib\n"); - maximum_speed = 0; - minimum_speed = -1; - latency = 0; - result = powernow_acpi_init(); - if (result) { - printk(KERN_INFO PFX - "ACPI and legacy methods failed\n"); - } - } else { - /* SGTC use the bus clock as timer */ - latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); - } - } - - if (result) - return result; - - printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); - - policy->cpuinfo.transition_latency = - cpufreq_scale(2000000UL, fsb, latency); - - policy->cur = powernow_get(0); - - cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, powernow_table); -} - -static int powernow_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (acpi_processor_perf) { - acpi_processor_unregister_performance(acpi_processor_perf, 0); - free_cpumask_var(acpi_processor_perf->shared_cpu_map); - kfree(acpi_processor_perf); - } -#endif - - kfree(powernow_table); - return 0; -} - -static struct freq_attr *powernow_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - .bios_limit = acpi_processor_get_bios_limit, -#endif - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, -}; - -static int __init powernow_init(void) -{ - if (check_powernow() == 0) - return -ENODEV; - return cpufreq_register_driver(&powernow_driver); -} - - -static void __exit powernow_exit(void) -{ - cpufreq_unregister_driver(&powernow_driver); -} - -module_param(acpi_force, int, 0444); -MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); -MODULE_LICENSE("GPL"); - -late_initcall(powernow_init); -module_exit(powernow_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h deleted file mode 100644 index 35fb4ea..0000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * AMD-specific information - * - */ - -union msr_fidvidctl { - struct { - unsigned FID:5, // 4:0 - reserved1:3, // 7:5 - VID:5, // 12:8 - reserved2:3, // 15:13 - FIDC:1, // 16 - VIDC:1, // 17 - reserved3:2, // 19:18 - FIDCHGRATIO:1, // 20 - reserved4:11, // 31-21 - SGTC:20, // 32:51 - reserved5:12; // 63:52 - } bits; - unsigned long long val; -}; - -union msr_fidvidstatus { - struct { - unsigned CFID:5, // 4:0 - reserved1:3, // 7:5 - SFID:5, // 12:8 - reserved2:3, // 15:13 - MFID:5, // 20:16 - reserved3:11, // 31:21 - CVID:5, // 36:32 - reserved4:3, // 39:37 - SVID:5, // 44:40 - reserved5:3, // 47:45 - MVID:5, // 52:48 - reserved6:11; // 63:53 - } bits; - unsigned long long val; -}; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c deleted file mode 100644 index 2368e38..0000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ /dev/null @@ -1,1607 +0,0 @@ -/* - * (c) 2003-2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Support : mark.langsdorf@amd.com - * - * Based on the powernow-k7.c module written by Dave Jones. - * (C) 2003 Dave Jones on behalf of SuSE Labs - * (C) 2004 Dominik Brodowski <linux@brodo.de> - * (C) 2004 Pavel Machek <pavel@ucw.cz> - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Valuable input gratefully received from Dave Jones, Pavel Machek, - * Dominik Brodowski, Jacob Shin, and others. - * Originally developed by Paul Devriendt. - * Processor information obtained from Chapter 9 (Power and Thermal Management) - * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD - * Opteron Processors" available for download from www.amd.com - * - * Tables for specific CPUs can be inferred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/cpumask.h> -#include <linux/sched.h> /* for current / set_cpus_allowed() */ -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> - -#include <linux/acpi.h> -#include <linux/mutex.h> -#include <acpi/processor.h> - -#define PFX "powernow-k8: " -#define VERSION "version 2.20.00" -#include "powernow-k8.h" -#include "mperf.h" - -/* serialize freq changes */ -static DEFINE_MUTEX(fidvid_mutex); - -static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); - -static int cpu_family = CPU_OPTERON; - -/* core performance boost */ -static bool cpb_capable, cpb_enabled; -static struct msr __percpu *msrs; - -static struct cpufreq_driver cpufreq_amd64_driver; - -#ifndef CONFIG_SMP -static inline const struct cpumask *cpu_core_mask(int cpu) -{ - return cpumask_of(0); -} -#endif - -/* Return a frequency in MHz, given an input fid */ -static u32 find_freq_from_fid(u32 fid) -{ - return 800 + (fid * 100); -} - -/* Return a frequency in KHz, given an input fid */ -static u32 find_khz_freq_from_fid(u32 fid) -{ - return 1000 * find_freq_from_fid(fid); -} - -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, - u32 pstate) -{ - return data[pstate].frequency; -} - -/* Return the vco fid for an input fid - * - * Each "low" fid has corresponding "high" fid, and you can get to "low" fids - * only from corresponding high fids. This returns "high" fid corresponding to - * "low" one. - */ -static u32 convert_fid_to_vco_fid(u32 fid) -{ - if (fid < HI_FID_TABLE_BOTTOM) - return 8 + (2 * fid); - else - return fid; -} - -/* - * Return 1 if the pending bit is set. Unless we just instructed the processor - * to transition to a new state, seeing this bit set is really bad news. - */ -static int pending_bit_stuck(void) -{ - u32 lo, hi; - - if (cpu_family == CPU_HW_PSTATE) - return 0; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; -} - -/* - * Update the global current fid / vid values from the status msr. - * Returns 1 on error. - */ -static int query_current_values_with_pending_wait(struct powernow_k8_data *data) -{ - u32 lo, hi; - u32 i = 0; - - if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; - - /* - * a workaround for family 11h erratum 311 might cause - * an "out-of-range Pstate if the core is in Pstate-0 - */ - if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) - data->currpstate = HW_PSTATE_0; - - return 0; - } - do { - if (i++ > 10000) { - dprintk("detected change pending stuck\n"); - return 1; - } - rdmsr(MSR_FIDVID_STATUS, lo, hi); - } while (lo & MSR_S_LO_CHANGE_PENDING); - - data->currvid = hi & MSR_S_HI_CURRENT_VID; - data->currfid = lo & MSR_S_LO_CURRENT_FID; - - return 0; -} - -/* the isochronous relief time */ -static void count_off_irt(struct powernow_k8_data *data) -{ - udelay((1 << data->irt) * 10); - return; -} - -/* the voltage stabilization time */ -static void count_off_vst(struct powernow_k8_data *data) -{ - udelay(data->vstable * VST_UNITS_20US); - return; -} - -/* need to init the control msr to a safe value (for each cpu) */ -static void fidvid_msr_init(void) -{ - u32 lo, hi; - u8 fid, vid; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - vid = hi & MSR_S_HI_CURRENT_VID; - fid = lo & MSR_S_LO_CURRENT_FID; - lo = fid | (vid << MSR_C_LO_VID_SHIFT); - hi = MSR_C_HI_STP_GNT_BENIGN; - dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); - wrmsr(MSR_FIDVID_CTL, lo, hi); -} - -/* write the new fid value along with the other control fields to the msr */ -static int write_new_fid(struct powernow_k8_data *data, u32 fid) -{ - u32 lo; - u32 savevid = data->currvid; - u32 i = 0; - - if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on fid write\n"); - return 1; - } - - lo = fid; - lo |= (data->currvid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", - fid, lo, data->plllock * PLL_LOCK_CONVERSION); - - do { - wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); - if (i++ > 100) { - printk(KERN_ERR PFX - "Hardware error - pending bit very stuck - " - "no further pstate changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - count_off_irt(data); - - if (savevid != data->currvid) { - printk(KERN_ERR PFX - "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); - return 1; - } - - if (fid != data->currfid) { - printk(KERN_ERR PFX - "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); - return 1; - } - - return 0; -} - -/* Write a new vid to the hardware */ -static int write_new_vid(struct powernow_k8_data *data, u32 vid) -{ - u32 lo; - u32 savefid = data->currfid; - int i = 0; - - if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on vid write\n"); - return 1; - } - - lo = data->currfid; - lo |= (vid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", - vid, lo, STOP_GRANT_5NS); - - do { - wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); - if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit " - "very stuck - no further pstate " - "changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old " - "0x%x new 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " - "curr 0x%x\n", - vid, data->currvid); - return 1; - } - - return 0; -} - -/* - * Reduce the vid by the max of step or reqvid. - * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. - */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, - u32 reqvid, u32 step) -{ - if ((data->currvid - reqvid) > step) - reqvid = data->currvid - step; - - if (write_new_vid(data, reqvid)) - return 1; - - count_off_vst(data); - - return 0; -} - -/* Change hardware pstate by single MSR write */ -static int transition_pstate(struct powernow_k8_data *data, u32 pstate) -{ - wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currpstate = pstate; - return 0; -} - -/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, - u32 reqfid, u32 reqvid) -{ - if (core_voltage_pre_transition(data, reqvid, reqfid)) - return 1; - - if (core_frequency_transition(data, reqfid)) - return 1; - - if (core_voltage_post_transition(data, reqvid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " - "curr 0x%x 0x%x\n", - smp_processor_id(), - reqfid, reqvid, data->currfid, data->currvid); - return 1; - } - - dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", - smp_processor_id(), data->currfid, data->currvid); - - return 0; -} - -/* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 reqfid) -{ - u32 rvosteps = data->rvo; - u32 savefid = data->currfid; - u32 maxvid, lo, rvomult = 1; - - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " - "reqvid 0x%x, rvo 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqvid, data->rvo); - - if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) - rvomult = 2; - rvosteps *= rvomult; - rdmsr(MSR_FIDVID_STATUS, lo, maxvid); - maxvid = 0x1f & (maxvid >> 16); - dprintk("ph1 maxvid=0x%x\n", maxvid); - if (reqvid < maxvid) /* lower numbers are higher voltages */ - reqvid = maxvid; - - while (data->currvid > reqvid) { - dprintk("ph1: curr 0x%x, req vid 0x%x\n", - data->currvid, reqvid); - if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) - return 1; - } - - while ((rvosteps > 0) && - ((rvomult * data->rvo + data->currvid) > reqvid)) { - if (data->currvid == maxvid) { - rvosteps = 0; - } else { - dprintk("ph1: changing vid for rvo, req 0x%x\n", - data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid-1, 1)) - return 1; - rvosteps--; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 2 - core frequency transition */ -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) -{ - u32 vcoreqfid, vcocurrfid, vcofiddiff; - u32 fid_interval, savevid = data->currvid; - - if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", - data->currfid); - return 0; - } - - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " - "reqfid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqfid); - - vcoreqfid = convert_fid_to_vco_fid(reqfid); - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - - if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) - vcofiddiff = 0; - - while (vcofiddiff > 2) { - (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); - - if (reqfid > data->currfid) { - if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, - data->currfid + fid_interval)) - return 1; - } else { - if (write_new_fid - (data, - 2 + convert_fid_to_vco_fid(data->currfid))) - return 1; - } - } else { - if (write_new_fid(data, data->currfid - fid_interval)) - return 1; - } - - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - } - - if (write_new_fid(data, reqfid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (data->currfid != reqfid) { - printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, " - "curr 0x%x, req 0x%x\n", - data->currfid, reqfid); - return 1; - } - - if (savevid != data->currvid) { - printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", - savevid, data->currvid); - return 1; - } - - dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, - u32 reqvid) -{ - u32 savefid = data->currfid; - u32 savereqvid = reqvid; - - dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid); - - if (reqvid != data->currvid) { - if (write_new_vid(data, reqvid)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX - "ph3: bad fid change, save 0x%x, curr 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (data->currvid != reqvid) { - printk(KERN_ERR PFX - "ph3: failed vid transition\n, " - "req 0x%x, curr 0x%x", - reqvid, data->currvid); - return 1; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savereqvid != data->currvid) { - dprintk("ph3 failed, currvid 0x%x\n", data->currvid); - return 1; - } - - if (savefid != data->currfid) { - dprintk("ph3 failed, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -static void check_supported_cpu(void *_rc) -{ - u32 eax, ebx, ecx, edx; - int *rc = _rc; - - *rc = -ENODEV; - - if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD) - return; - - eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && - ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) - return; - - if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { - if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX - "Processor cpuid %x not supported\n", eax); - return; - } - - eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); - if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { - printk(KERN_INFO PFX - "No frequency change capabilities detected\n"); - return; - } - - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) - != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX - "Power state transitions not supported\n"); - return; - } - } else { /* must be a HW Pstate capable processor */ - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) - cpu_family = CPU_HW_PSTATE; - else - return; - } - - *rc = 0; -} - -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, - u8 maxvid) -{ - unsigned int j; - u8 lastfid = 0xff; - - for (j = 0; j < data->numps; j++) { - if (pst[j].vid > LEAST_VID) { - printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n", - j, pst[j].vid); - return -EINVAL; - } - if (pst[j].vid < data->rvo) { - /* vid + rvo >= 0 */ - printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].vid < maxvid + data->rvo) { - /* vid + rvo >= maxvid */ - printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].fid > MAX_FID) { - printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { - /* Only first fid is allowed to be in "low" range */ - printk(KERN_ERR FW_BUG PFX "two low fids - %d : " - "0x%x\n", j, pst[j].fid); - return -EINVAL; - } - if (pst[j].fid < lastfid) - lastfid = pst[j].fid; - } - if (lastfid & 1) { - printk(KERN_ERR FW_BUG PFX "lastfid invalid\n"); - return -EINVAL; - } - if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX - "first fid not from lo freq table\n"); - - return 0; -} - -static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, - unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} - -static void print_basics(struct powernow_k8_data *data) -{ - int j; - for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != - CPUFREQ_ENTRY_INVALID) { - if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX - " %d : pstate %d (%d MHz)\n", j, - data->powernow_table[j].index, - data->powernow_table[j].frequency/1000); - } else { - printk(KERN_INFO PFX - "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, - data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); - } - } - } - if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", - data->batps); -} - -static u32 freq_from_fid_did(u32 fid, u32 did) -{ - u32 mhz = 0; - - if (boot_cpu_data.x86 == 0x10) - mhz = (100 * (fid + 0x10)) >> did; - else if (boot_cpu_data.x86 == 0x11) - mhz = (100 * (fid + 8)) >> did; - else - BUG(); - - return mhz * 1000; -} - -static int fill_powernow_table(struct powernow_k8_data *data, - struct pst_s *pst, u8 maxvid) -{ - struct cpufreq_frequency_table *powernow_table; - unsigned int j; - - if (data->batps) { - /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX - "Only %d pstates usable (use ACPI driver for full " - "range\n", data->batps); - data->numps = data->batps; - } - - for (j = 1; j < data->numps; j++) { - if (pst[j-1].fid >= pst[j].fid) { - printk(KERN_ERR PFX "PST out of sequence\n"); - return -EINVAL; - } - } - - if (data->numps < 2) { - printk(KERN_ERR PFX "no p states to transition\n"); - return -ENODEV; - } - - if (check_pst_table(data, pst, maxvid)) - return -EINVAL; - - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->numps + 1)), GFP_KERNEL); - if (!powernow_table) { - printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); - return -ENOMEM; - } - - for (j = 0; j < data->numps; j++) { - int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - freq = find_khz_freq_from_fid(pst[j].fid); - powernow_table[j].frequency = freq; - } - powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; - - if (query_current_values_with_pending_wait(data)) { - kfree(powernow_table); - return -EIO; - } - - dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); - data->powernow_table = powernow_table; - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - for (j = 0; j < data->numps; j++) - if ((pst[j].fid == data->currfid) && - (pst[j].vid == data->currvid)) - return 0; - - dprintk("currfid/vid do not match PST, ignoring\n"); - return 0; -} - -/* Find and validate the PSB/PST table in BIOS. */ -static int find_psb_table(struct powernow_k8_data *data) -{ - struct psb_s *psb; - unsigned int i; - u32 mvs; - u8 maxvid; - u32 cpst = 0; - u32 thiscpuid; - - for (i = 0xc0000; i < 0xffff0; i += 0x10) { - /* Scan BIOS looking for the signature. */ - /* It can not be at ffff0 - it is too big. */ - - psb = phys_to_virt(i); - if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) - continue; - - dprintk("found PSB header at 0x%p\n", psb); - - dprintk("table vers: 0x%x\n", psb->tableversion); - if (psb->tableversion != PSB_VERSION_1_4) { - printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n"); - return -ENODEV; - } - - dprintk("flags: 0x%x\n", psb->flags1); - if (psb->flags1) { - printk(KERN_ERR FW_BUG PFX "unknown flags\n"); - return -ENODEV; - } - - data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", - data->vstable); - - dprintk("flags2: 0x%x\n", psb->flags2); - data->rvo = psb->flags2 & 3; - data->irt = ((psb->flags2) >> 2) & 3; - mvs = ((psb->flags2) >> 4) & 3; - data->vidmvs = 1 << mvs; - data->batps = ((psb->flags2) >> 6) & 3; - - dprintk("ramp voltage offset: %d\n", data->rvo); - dprintk("isochronous relief time: %d\n", data->irt); - dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); - - dprintk("numpst: 0x%x\n", psb->num_tables); - cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || - (psb->cpuid == 0x00000fe0)) { - thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || - (thiscpuid == 0x00000fe0)) - cpst = 1; - } - if (cpst != 1) { - printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); - return -ENODEV; - } - - data->plllock = psb->plllocktime; - dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); - dprintk("maxfid: 0x%x\n", psb->maxfid); - dprintk("maxvid: 0x%x\n", psb->maxvid); - maxvid = psb->maxvid; - - data->numps = psb->numps; - dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, - (struct pst_s *)(psb+1), maxvid); - } - /* - * If you see this message, complain to BIOS manufacturer. If - * he tells you "we do not support Linux" or some similar - * nonsense, remember that Windows 2000 uses the same legacy - * mechanism that the old Linux PSB driver uses. Tell them it - * is broken with Windows 2000. - * - * The reference to the AMD documentation is chapter 9 in the - * BIOS and Kernel Developer's Guide, which is available on - * www.amd.com - */ - printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); - printk(KERN_ERR PFX "Make sure that your BIOS is up to date" - " and Cool'N'Quiet support is enabled in BIOS setup\n"); - return -ENODEV; -} - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, - unsigned int index) -{ - u64 control; - - if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) - return; - - control = data->acpi_data.states[index].control; - data->irt = (control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (control >> VST_SHIFT) & VST_MASK; -} - -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) -{ - struct cpufreq_frequency_table *powernow_table; - int ret_val = -ENODEV; - u64 control, status; - - if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed: bad ACPI data\n"); - return -EIO; - } - - /* verify the data contained in the ACPI structures */ - if (data->acpi_data.state_count <= 1) { - dprintk("No ACPI P-States\n"); - goto err_out; - } - - control = data->acpi_data.control_register.space_id; - status = data->acpi_data.status_register.space_id; - - if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - control, status); - goto err_out; - } - - /* fill in data->powernow_table */ - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->acpi_data.state_count + 1)), GFP_KERNEL); - if (!powernow_table) { - dprintk("powernow_table memory alloc failure\n"); - goto err_out; - } - - /* fill in data */ - data->numps = data->acpi_data.state_count; - powernow_k8_acpi_pst_values(data, 0); - - if (cpu_family == CPU_HW_PSTATE) - ret_val = fill_powernow_table_pstate(data, powernow_table); - else - ret_val = fill_powernow_table_fidvid(data, powernow_table); - if (ret_val) - goto err_out_mem; - - powernow_table[data->acpi_data.state_count].frequency = - CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; - data->powernow_table = powernow_table; - - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { - printk(KERN_ERR PFX - "unable to alloc powernow_k8_data cpumask\n"); - ret_val = -ENOMEM; - goto err_out_mem; - } - - return 0; - -err_out_mem: - kfree(powernow_table); - -err_out: - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - - /* data->acpi_data.state_count informs us at ->exit() - * whether ACPI was used */ - data->acpi_data.state_count = 0; - - return ret_val; -} - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - u32 hi = 0, lo = 0; - rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi); - data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 index; - - index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - " - "bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS " - "manufacturer\n"); - invalidate_entry(powernow_table, i); - continue; - } - rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); - if (!(hi & HW_PSTATE_VALID_MASK)) { - dprintk("invalid pstate %d, ignoring\n", index); - invalidate_entry(powernow_table, i); - continue; - } - - powernow_table[i].index = index; - - /* Frequency may be rounded for these */ - if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) - || boot_cpu_data.x86 == 0x11) { - powernow_table[i].frequency = - freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); - } else - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; - } - return 0; -} - -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid; - u32 vid; - u32 freq, index; - u64 status, control; - - if (data->exttype) { - status = data->acpi_data.states[i].status; - fid = status & EXT_FID_MASK; - vid = (status >> VID_SHIFT) & EXT_VID_MASK; - } else { - control = data->acpi_data.states[i].control; - fid = control & FID_MASK; - vid = (control >> VID_SHIFT) & VID_MASK; - } - - dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - - index = fid | (vid<<8); - powernow_table[i].index = index; - - freq = find_khz_freq_from_fid(fid); - powernow_table[i].frequency = freq; - - /* verify frequency is OK */ - if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", freq); - invalidate_entry(powernow_table, i); - continue; - } - - /* verify voltage is OK - - * BIOSs are using "off" to indicate invalid */ - if (vid == VID_OFF) { - dprintk("invalid vid %u, ignoring\n", vid); - invalidate_entry(powernow_table, i); - continue; - } - - if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries " - "%u kHz vs. %u kHz\n", freq, - (unsigned int) - (data->acpi_data.states[i].core_frequency - * 1000)); - invalidate_entry(powernow_table, i); - continue; - } - } - return 0; -} - -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) -{ - if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, - data->cpu); - free_cpumask_var(data->acpi_data.shared_cpu_map); -} - -static int get_transition_latency(struct powernow_k8_data *data) -{ - int max_latency = 0; - int i; - for (i = 0; i < data->acpi_data.state_count; i++) { - int cur_latency = data->acpi_data.states[i].transition_latency - + data->acpi_data.states[i].bus_master_latency; - if (cur_latency > max_latency) - max_latency = cur_latency; - } - if (max_latency == 0) { - /* - * Fam 11h and later may return 0 as transition latency. This - * is intended and means "very fast". While cpufreq core and - * governors currently can handle that gracefully, better set it - * to 1 to avoid problems in the future. - */ - if (boot_cpu_data.x86 < 0x11) - printk(KERN_ERR FW_WARN PFX "Invalid zero transition " - "latency\n"); - max_latency = 1; - } - /* value in usecs, needs to be in nanoseconds */ - return 1000 * max_latency; -} - -/* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, - unsigned int index) -{ - u32 fid = 0; - u32 vid = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* fid/vid correctness check for k8 */ - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid - * are the upper 8 bits. - */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; - - dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((data->currvid == vid) && (data->currfid == fid)) { - dprintk("target matches current values (fid 0x%x, vid 0x%x)\n", - fid, vid); - return 0; - } - - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", - smp_processor_id(), fid, vid); - freqs.old = find_khz_freq_from_fid(data->currfid); - freqs.new = find_khz_freq_from_fid(fid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, - unsigned int index) -{ - u32 pstate = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* get MSR index for hardware pstate transition */ - pstate = index & HW_PSTATE_MASK; - if (pstate > data->max_hw_pstate) - return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_pstate(data, pstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) -{ - cpumask_var_t oldmask; - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - u32 checkfid; - u32 checkvid; - unsigned int newstate; - int ret = -EIO; - - if (!data) - return -EINVAL; - - checkfid = data->currfid; - checkvid = data->currvid; - - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; - } - - dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", - pol->cpu, targfreq, pol->min, pol->max, relation); - - if (query_current_values_with_pending_wait(data)) - goto err_out; - - if (cpu_family != CPU_HW_PSTATE) { - dprintk("targ: curr fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - if ((checkvid != data->currvid) || - (checkfid != data->currfid)) { - printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, " - "vid 0x%x 0x%x\n", - checkfid, data->currfid, - checkvid, data->currvid); - } - } - - if (cpufreq_frequency_table_target(pol, data->powernow_table, - targfreq, relation, &newstate)) - goto err_out; - - mutex_lock(&fidvid_mutex); - - powernow_k8_acpi_pst_values(data, newstate); - - if (cpu_family == CPU_HW_PSTATE) - ret = transition_frequency_pstate(data, newstate); - else - ret = transition_frequency_fidvid(data, newstate); - if (ret) { - printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; - mutex_unlock(&fidvid_mutex); - goto err_out; - } - mutex_unlock(&fidvid_mutex); - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - newstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; - -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; -} - -/* Driver entry point to verify the policy and range of frequencies */ -static int powernowk8_verify(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - return cpufreq_frequency_table_verify(pol, data->powernow_table); -} - -struct init_on_cpu { - struct powernow_k8_data *data; - int rc; -}; - -static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) -{ - struct init_on_cpu *init_on_cpu = _init_on_cpu; - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing init, change pending bit set\n"); - init_on_cpu->rc = -ENODEV; - return; - } - - if (query_current_values_with_pending_wait(init_on_cpu->data)) { - init_on_cpu->rc = -ENODEV; - return; - } - - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); - - init_on_cpu->rc = 0; -} - -/* per CPU init entry point to the driver */ -static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) -{ - static const char ACPI_PSS_BIOS_BUG_MSG[] = - KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - FW_BUG PFX "Try again with latest BIOS.\n"; - struct powernow_k8_data *data; - struct init_on_cpu init_on_cpu; - int rc; - struct cpuinfo_x86 *c = &cpu_data(pol->cpu); - - if (!cpu_online(pol->cpu)) - return -ENODEV; - - smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); - if (rc) - return -ENODEV; - - data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); - if (!data) { - printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); - return -ENOMEM; - } - - data->cpu = pol->cpu; - data->currpstate = HW_PSTATE_INVALID; - - if (powernow_k8_cpu_init_acpi(data)) { - /* - * Use the PSB BIOS structure. This is only available on - * an UP version, and is deprecated by AMD. - */ - if (num_online_cpus() != 1) { - printk_once(ACPI_PSS_BIOS_BUG_MSG); - goto err_out; - } - if (pol->cpu != 0) { - printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " - "CPU other than CPU0. Complain to your BIOS " - "vendor.\n"); - goto err_out; - } - rc = find_psb_table(data); - if (rc) - goto err_out; - - /* Take a crude guess here. - * That guess was in microseconds, so multiply with 1000 */ - pol->cpuinfo.transition_latency = ( - ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + - ((1 << data->irt) * 30)) * 1000; - } else /* ACPI _PSS objects available */ - pol->cpuinfo.transition_latency = get_transition_latency(data); - - /* only run on specific CPU from here on */ - init_on_cpu.data = data; - smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, - &init_on_cpu, 1); - rc = init_on_cpu.rc; - if (rc != 0) - goto err_out_exit_acpi; - - if (cpu_family == CPU_HW_PSTATE) - cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); - else - cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); - data->available_cores = pol->cpus; - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - dprintk("policy current frequency %d kHz\n", pol->cur); - - /* min/max the cpu is capable of */ - if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { - printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n"); - powernow_k8_cpu_exit_acpi(data); - kfree(data->powernow_table); - kfree(data); - return -EINVAL; - } - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; - - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - - if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", - data->currpstate); - else - dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - per_cpu(powernow_data, pol->cpu) = data; - - return 0; - -err_out_exit_acpi: - powernow_k8_cpu_exit_acpi(data); - -err_out: - kfree(data); - return -ENODEV; -} - -static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - powernow_k8_cpu_exit_acpi(data); - - cpufreq_frequency_table_put_attr(pol->cpu); - - kfree(data->powernow_table); - kfree(data); - per_cpu(powernow_data, pol->cpu) = NULL; - - return 0; -} - -static void query_values_on_cpu(void *_err) -{ - int *err = _err; - struct powernow_k8_data *data = __this_cpu_read(powernow_data); - - *err = query_current_values_with_pending_wait(data); -} - -static unsigned int powernowk8_get(unsigned int cpu) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, cpu); - unsigned int khz = 0; - int err; - - if (!data) - return 0; - - smp_call_function_single(cpu, query_values_on_cpu, &err, true); - if (err) - goto out; - - if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - khz = find_khz_freq_from_fid(data->currfid); - - -out: - return khz; -} - -static void _cpb_toggle_msrs(bool t) -{ - int cpu; - - get_online_cpus(); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - if (t) - reg->l &= ~BIT(25); - else - reg->l |= BIT(25); - } - wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - put_online_cpus(); -} - -/* - * Switch on/off core performance boosting. - * - * 0=disable - * 1=enable. - */ -static void cpb_toggle(bool t) -{ - if (!cpb_capable) - return; - - if (t && !cpb_enabled) { - cpb_enabled = true; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting enabled.\n"); - } else if (!t && cpb_enabled) { - cpb_enabled = false; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting disabled.\n"); - } -} - -static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, - size_t count) -{ - int ret = -EINVAL; - unsigned long val = 0; - - ret = strict_strtoul(buf, 10, &val); - if (!ret && (val == 0 || val == 1) && cpb_capable) - cpb_toggle(val); - else - return -EINVAL; - - return count; -} - -static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) -{ - return sprintf(buf, "%u\n", cpb_enabled); -} - -#define define_one_rw(_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_rw(cpb); - -static struct freq_attr *powernow_k8_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - &cpb, - NULL, -}; - -static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, -}; - -/* - * Clear the boost-disable flag on the CPU_DOWN path so that this cpu - * cannot block the remaining ones from boosting. On the CPU_UP path we - * simply keep the boost-disable flag in sync with the current global - * state. - */ -static int cpb_notify(struct notifier_block *nb, unsigned long action, - void *hcpu) -{ - unsigned cpu = (long)hcpu; - u32 lo, hi; - - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - - if (!cpb_enabled) { - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo |= BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - } - break; - - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo &= ~BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - break; - - default: - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block cpb_nb = { - .notifier_call = cpb_notify, -}; - -/* driver entry point for init */ -static int __cpuinit powernowk8_init(void) -{ - unsigned int i, supported_cpus = 0, cpu; - int rv; - - for_each_online_cpu(i) { - int rc; - smp_call_function_single(i, check_supported_cpu, &rc, 1); - if (rc == 0) - supported_cpus++; - } - - if (supported_cpus != num_online_cpus()) - return -ENODEV; - - printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", - num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - - cpb_capable = true; - - msrs = msrs_alloc(); - if (!msrs) { - printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); - return -ENOMEM; - } - - register_cpu_notifier(&cpb_nb); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - cpb_enabled |= !(!!(reg->l & BIT(25))); - } - - printk(KERN_INFO PFX "Core Performance Boosting: %s.\n", - (cpb_enabled ? "on" : "off")); - } - - rv = cpufreq_register_driver(&cpufreq_amd64_driver); - if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { - unregister_cpu_notifier(&cpb_nb); - msrs_free(msrs); - msrs = NULL; - } - return rv; -} - -/* driver entry point for term */ -static void __exit powernowk8_exit(void) -{ - dprintk("exit\n"); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - msrs_free(msrs); - msrs = NULL; - - unregister_cpu_notifier(&cpb_nb); - } - - cpufreq_unregister_driver(&cpufreq_amd64_driver); -} - -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " - "Mark Langsdorf <mark.langsdorf@amd.com>"); -MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); -MODULE_LICENSE("GPL"); - -late_initcall(powernowk8_init); -module_exit(powernowk8_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h deleted file mode 100644 index df3529b..0000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * (c) 2003-2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -enum pstate { - HW_PSTATE_INVALID = 0xff, - HW_PSTATE_0 = 0, - HW_PSTATE_1 = 1, - HW_PSTATE_2 = 2, - HW_PSTATE_3 = 3, - HW_PSTATE_4 = 4, - HW_PSTATE_5 = 5, - HW_PSTATE_6 = 6, - HW_PSTATE_7 = 7, -}; - -struct powernow_k8_data { - unsigned int cpu; - - u32 numps; /* number of p-states */ - u32 batps; /* number of p-states supported on battery */ - u32 max_hw_pstate; /* maximum legal hardware pstate */ - - /* these values are constant when the PSB is used to determine - * vid/fid pairings, but are modified during the ->target() call - * when ACPI is used */ - u32 rvo; /* ramp voltage offset */ - u32 irt; /* isochronous relief time */ - u32 vidmvs; /* usable value calculated from mvs */ - u32 vstable; /* voltage stabilization time, units 20 us */ - u32 plllock; /* pll lock time, units 1 us */ - u32 exttype; /* extended interface = 1 */ - - /* keep track of the current fid / vid or pstate */ - u32 currvid; - u32 currfid; - enum pstate currpstate; - - /* the powernow_table includes all frequency and vid/fid pairings: - * fid are the lower 8 bits of the index, vid are the upper 8 bits. - * frequency is in kHz */ - struct cpufreq_frequency_table *powernow_table; - - /* the acpi table needs to be kept. it's only available if ACPI was - * used to determine valid frequency/vid/fid states */ - struct acpi_processor_performance acpi_data; - - /* we need to keep track of associated cores, but let cpufreq - * handle hotplug events - so just point at cpufreq pol->cpus - * structure */ - struct cpumask *available_cores; -}; - -/* processor's cpuid instruction support */ -#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ -#define CPUID_XFAM 0x0ff00000 /* extended family */ -#define CPUID_XFAM_K8 0 -#define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_MASK 0x000c0000 -#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ -#define CPUID_USE_XFAM_XMOD 0x00000f00 -#define CPUID_GET_MAX_CAPABILITIES 0x80000000 -#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 -#define P_STATE_TRANSITION_CAPABLE 6 - -/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ -/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ -/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ -/* the register number is placed in ecx, and the data is returned in edx:eax. */ - -#define MSR_FIDVID_CTL 0xc0010041 -#define MSR_FIDVID_STATUS 0xc0010042 - -/* Field definitions within the FID VID Low Control MSR : */ -#define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00003f00 -#define MSR_C_LO_NEW_FID 0x0000003f -#define MSR_C_LO_VID_SHIFT 8 - -/* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff - -/* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 -#define MSR_S_LO_MAX_FID 0x003f0000 -#define MSR_S_LO_START_FID 0x00003f00 -#define MSR_S_LO_CURRENT_FID 0x0000003f - -/* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 -#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 -#define MSR_S_HI_START_VID 0x00003f00 -#define MSR_S_HI_CURRENT_VID 0x0000003f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 - - -/* Hardware Pstate _PSS and MSR definitions */ -#define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_MASK 0x00000007 -#define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_PSTATE_MAX_MASK 0x000000f0 -#define HW_PSTATE_MAX_SHIFT 4 -#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ -#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ -#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ -#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ - -/* define the two driver architectures */ -#define CPU_OPTERON 0 -#define CPU_HW_PSTATE 1 - - -/* - * There are restrictions frequencies have to follow: - * - only 1 entry in the low fid table ( <=1.4GHz ) - * - lowest entry in the high fid table must be >= 2 * the entry in the - * low fid table - * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry - * in the low fid table - * - the parts can only step at <= 200 MHz intervals, odd fid values are - * supported in revision G and later revisions. - * - lowest frequency must be >= interprocessor hypertransport link speed - * (only applies to MP systems obviously) - */ - -/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ -#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ -#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ - -#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ -#define HI_VCOFREQ_TABLE_BOTTOM 1600 - -#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ - -#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ - -#define MIN_FREQ 800 /* Min and max freqs, per spec */ -#define MAX_FREQ 5000 - -#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ - -#define VID_OFF 0x3f - -#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ - -#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ - -#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ - -/* - * Most values of interest are encoded in a single field of the _PSS - * entries: the "control" value. - */ - -#define IRT_SHIFT 30 -#define RVO_SHIFT 28 -#define EXT_TYPE_SHIFT 27 -#define PLL_L_SHIFT 20 -#define MVS_SHIFT 18 -#define VST_SHIFT 11 -#define VID_SHIFT 6 -#define IRT_MASK 3 -#define RVO_MASK 3 -#define EXT_TYPE_MASK 1 -#define PLL_L_MASK 0x7f -#define MVS_MASK 3 -#define VST_MASK 0x7f -#define VID_MASK 0x1f -#define FID_MASK 0x1f -#define EXT_VID_MASK 0x3f -#define EXT_FID_MASK 0x3f - - -/* - * Version 1.4 of the PSB table. This table is constructed by BIOS and is - * to tell the OS's power management driver which VIDs and FIDs are - * supported by this particular processor. - * If the data in the PSB / PST is wrong, then this driver will program the - * wrong values into hardware, which is very likely to lead to a crash. - */ - -#define PSB_ID_STRING "AMDK7PNOW!" -#define PSB_ID_STRING_LEN 10 - -#define PSB_VERSION_1_4 0x14 - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags1; - u16 vstable; - u8 flags2; - u8 num_tables; - u32 cpuid; - u8 plllocktime; - u8 maxfid; - u8 maxvid; - u8 numps; -}; - -/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ -struct pst_s { - u8 fid; - u8 vid; -}; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) - -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 regfid); -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c deleted file mode 100644 index 435a996..0000000 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * sc520_freq.c: cpufreq driver for the AMD Elan sc520 - * - * Copyright (C) 2005 Sean Young <sean@mess.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Based on elanfreq.c - * - * 2005-03-30: - initial revision - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define MMCR_BASE 0xfffef000 /* The default base address */ -#define OFFS_CPUCTL 0x2 /* CPU Control Register */ - -static __u8 __iomem *cpuctl; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "sc520_freq", msg) -#define PFX "sc520_freq: " - -static struct cpufreq_frequency_table sc520_freq_table[] = { - {0x01, 100000}, - {0x02, 133000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg = *cpuctl; - - switch (clockspeed_reg & 0x03) { - default: - printk(KERN_ERR PFX "error: cpuctl register has unexpected " - "value %02x\n", clockspeed_reg); - case 0x01: - return 100000; - case 0x02: - return 133000; - } -} - -static void sc520_freq_set_cpu_state(unsigned int state) -{ - - struct cpufreq_freqs freqs; - u8 clockspeed_reg; - - freqs.old = sc520_freq_get_cpu_frequency(0); - freqs.new = sc520_freq_table[state].frequency; - freqs.cpu = 0; /* AMD Elan is UP */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("attempting to set frequency to %i kHz\n", - sc520_freq_table[state].frequency); - - local_irq_disable(); - - clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); -} - -static int sc520_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int sc520_freq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int result; - - /* capability check */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) - return -ENODEV; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = sc520_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); - - return 0; -} - - -static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -static struct freq_attr *sc520_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver sc520_freq_driver = { - .get = sc520_freq_get_cpu_frequency, - .verify = sc520_freq_verify, - .target = sc520_freq_target, - .init = sc520_freq_cpu_init, - .exit = sc520_freq_cpu_exit, - .name = "sc520_freq", - .owner = THIS_MODULE, - .attr = sc520_freq_attr, -}; - - -static int __init sc520_freq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int err; - - /* Test if we have the right hardware */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { - dprintk("no Elan SC520 processor found!\n"); - return -ENODEV; - } - cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if (!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); - return -ENOMEM; - } - - err = cpufreq_register_driver(&sc520_freq_driver); - if (err) - iounmap(cpuctl); - - return err; -} - - -static void __exit sc520_freq_exit(void) -{ - cpufreq_unregister_driver(&sc520_freq_driver); - iounmap(cpuctl); -} - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sean Young <sean@mess.org>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); - -module_init(sc520_freq_init); -module_exit(sc520_freq_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c deleted file mode 100644 index 9b1ff37..0000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ /dev/null @@ -1,636 +0,0 @@ -/* - * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium - * M (part of the Centrino chipset). - * - * Since the original Pentium M, most new Intel CPUs support Enhanced - * SpeedStep. - * - * Despite the "SpeedStep" in the name, this is almost entirely unlike - * traditional SpeedStep. - * - * Modelled on speedstep.c - * - * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> /* current */ -#include <linux/delay.h> -#include <linux/compiler.h> -#include <linux/gfp.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> - -#define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@vger.kernel.org" - -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) - -#define INTEL_MSR_RANGE (0xffff) - -struct cpu_id -{ - __u8 x86; /* CPU family */ - __u8 x86_model; /* model */ - __u8 x86_mask; /* stepping */ -}; - -enum { - CPU_BANIAS, - CPU_DOTHAN_A1, - CPU_DOTHAN_A2, - CPU_DOTHAN_B0, - CPU_MP4HT_D0, - CPU_MP4HT_E0, -}; - -static const struct cpu_id cpu_ids[] = { - [CPU_BANIAS] = { 6, 9, 5 }, - [CPU_DOTHAN_A1] = { 6, 13, 1 }, - [CPU_DOTHAN_A2] = { 6, 13, 2 }, - [CPU_DOTHAN_B0] = { 6, 13, 6 }, - [CPU_MP4HT_D0] = {15, 3, 4 }, - [CPU_MP4HT_E0] = {15, 4, 1 }, -}; -#define N_IDS ARRAY_SIZE(cpu_ids) - -struct cpu_model -{ - const struct cpu_id *cpu_id; - const char *model_name; - unsigned max_freq; /* max clock in kHz */ - - struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ -}; -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x); - -/* Operating points for current CPU */ -static DEFINE_PER_CPU(struct cpu_model *, centrino_model); -static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); - -static struct cpufreq_driver centrino_driver; - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE - -/* Computes the correct form for IA32_PERF_CTL MSR for a particular - frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ -#define OP(mhz, mv) \ - { \ - .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ - } - -/* - * These voltage tables were derived from the Intel Pentium M - * datasheet, document 25261202.pdf, Table 5. I have verified they - * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium - * M. - */ - -/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ -static struct cpufreq_frequency_table banias_900[] = -{ - OP(600, 844), - OP(800, 988), - OP(900, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ -static struct cpufreq_frequency_table banias_1000[] = -{ - OP(600, 844), - OP(800, 972), - OP(900, 988), - OP(1000, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ -static struct cpufreq_frequency_table banias_1100[] = -{ - OP( 600, 956), - OP( 800, 1020), - OP( 900, 1100), - OP(1000, 1164), - OP(1100, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - - -/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ -static struct cpufreq_frequency_table banias_1200[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP( 900, 1020), - OP(1000, 1100), - OP(1100, 1164), - OP(1200, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.30GHz (Banias) */ -static struct cpufreq_frequency_table banias_1300[] = -{ - OP( 600, 956), - OP( 800, 1260), - OP(1000, 1292), - OP(1200, 1356), - OP(1300, 1388), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.40GHz (Banias) */ -static struct cpufreq_frequency_table banias_1400[] = -{ - OP( 600, 956), - OP( 800, 1180), - OP(1000, 1308), - OP(1200, 1436), - OP(1400, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.50GHz (Banias) */ -static struct cpufreq_frequency_table banias_1500[] = -{ - OP( 600, 956), - OP( 800, 1116), - OP(1000, 1228), - OP(1200, 1356), - OP(1400, 1452), - OP(1500, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.60GHz (Banias) */ -static struct cpufreq_frequency_table banias_1600[] = -{ - OP( 600, 956), - OP( 800, 1036), - OP(1000, 1164), - OP(1200, 1276), - OP(1400, 1420), - OP(1600, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.70GHz (Banias) */ -static struct cpufreq_frequency_table banias_1700[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP(1000, 1116), - OP(1200, 1228), - OP(1400, 1308), - OP(1700, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; -#undef OP - -#define _BANIAS(cpuid, max, name) \ -{ .cpu_id = cpuid, \ - .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ - .max_freq = (max)*1000, \ - .op_points = banias_##max, \ -} -#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) - -/* CPU models, their operating frequency range, and freq/voltage - operating points */ -static struct cpu_model models[] = -{ - _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), - BANIAS(1000), - BANIAS(1100), - BANIAS(1200), - BANIAS(1300), - BANIAS(1400), - BANIAS(1500), - BANIAS(1600), - BANIAS(1700), - - /* NULL model_name is a wildcard */ - { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, - - { NULL, } -}; -#undef _BANIAS -#undef BANIAS - -static int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - struct cpu_model *model; - - for(model = models; model->cpu_id != NULL; model++) - if (centrino_verify_cpu_id(cpu, model->cpu_id) && - (model->model_name == NULL || - strcmp(cpu->x86_model_id, model->model_name) == 0)) - break; - - if (model->cpu_id == NULL) { - /* No match at all */ - dprintk("no support for CPU model \"%s\": " - "send /proc/cpuinfo to " MAINTAINER "\n", - cpu->x86_model_id); - return -ENOENT; - } - - if (model->op_points == NULL) { - /* Matched a non-match */ - dprintk("no table support for CPU model \"%s\"\n", - cpu->x86_model_id); - dprintk("try using the acpi-cpufreq driver\n"); - return -ENOENT; - } - - per_cpu(centrino_model, policy->cpu) = model; - - dprintk("found \"%s\": max frequency: %dkHz\n", - model->model_name, model->max_freq); - - return 0; -} - -#else -static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - return -ENODEV; -} -#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ - -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x) -{ - if ((c->x86 == x->x86) && - (c->x86_model == x->x86_model) && - (c->x86_mask == x->x86_mask)) - return 1; - return 0; -} - -/* To be called only after centrino_model is initialized */ -static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) -{ - int i; - - /* - * Extract clock in kHz from PERF_CTL value - * for centrino, as some DSDTs are buggy. - * Ideally, this can be done using the acpi_data structure. - */ - if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { - msr = (msr >> 8) & 0xff; - return msr * 100000; - } - - if ((!per_cpu(centrino_model, cpu)) || - (!per_cpu(centrino_model, cpu)->op_points)) - return 0; - - msr &= 0xffff; - for (i = 0; - per_cpu(centrino_model, cpu)->op_points[i].frequency - != CPUFREQ_TABLE_END; - i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) - return per_cpu(centrino_model, cpu)-> - op_points[i].frequency; - } - if (failsafe) - return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; - else - return 0; -} - -/* Return the current CPU frequency in kHz */ -static unsigned int get_cur_freq(unsigned int cpu) -{ - unsigned l, h; - unsigned clock_freq; - - rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); - clock_freq = extract_clock(l, cpu, 0); - - if (unlikely(clock_freq == 0)) { - /* - * On some CPUs, we can see transient MSR values (which are - * not present in _PSS), while CPU is doing some automatic - * P-state transition (like TM2). Get the last freq set - * in PERF_CTL. - */ - rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); - clock_freq = extract_clock(l, cpu, 1); - } - return clock_freq; -} - - -static int centrino_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - unsigned freq; - unsigned l, h; - int ret; - int i; - - /* Only Intel makes Enhanced Speedstep-capable CPUs */ - if (cpu->x86_vendor != X86_VENDOR_INTEL || - !cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) - centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (policy->cpu != 0) - return -ENODEV; - - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; - - if (!per_cpu(centrino_cpu, policy->cpu)) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } - - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } - - /* Check to see if Enhanced SpeedStep is enabled, and try to - enable it if not. */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); - wrmsr(MSR_IA32_MISC_ENABLE, l, h); - - /* check to see if it stuck */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO PFX - "couldn't enable Enhanced SpeedStep\n"); - return -ENODEV; - } - } - - freq = get_cur_freq(policy->cpu); - policy->cpuinfo.transition_latency = 10000; - /* 10uS transition latency */ - policy->cur = freq; - - dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); - - ret = cpufreq_frequency_table_cpuinfo(policy, - per_cpu(centrino_model, policy->cpu)->op_points); - if (ret) - return (ret); - - cpufreq_frequency_table_get_attr( - per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu); - - return 0; -} - -static int centrino_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - - if (!per_cpu(centrino_model, cpu)) - return -ENODEV; - - cpufreq_frequency_table_put_attr(cpu); - - per_cpu(centrino_model, cpu) = NULL; - - return 0; -} - -/** - * centrino_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within this model's frequency range at least one - * border included. - */ -static int centrino_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - per_cpu(centrino_model, policy->cpu)->op_points); -} - -/** - * centrino_setpolicy - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; - struct cpufreq_freqs freqs; - int retval = 0; - unsigned int j, k, first_cpu, tmp; - cpumask_var_t covered_cpus; - - if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) - return -ENOMEM; - - if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { - retval = -ENODEV; - goto out; - } - - if (unlikely(cpufreq_frequency_table_target(policy, - per_cpu(centrino_model, cpu)->op_points, - target_freq, - relation, - &newstate))) { - retval = -EINVAL; - goto out; - } - - first_cpu = 1; - for_each_cpu(j, policy->cpus) { - int good_cpu; - - /* cpufreq holds the hotplug lock, so we are safe here */ - if (!cpu_online(j)) - continue; - - /* - * Support for SMP systems. - * Make sure we are running on CPU that wants to change freq - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - good_cpu = cpumask_any_and(policy->cpus, - cpu_online_mask); - else - good_cpu = j; - - if (good_cpu >= nr_cpu_ids) { - dprintk("couldn't limit to CPUs in this domain\n"); - retval = -EAGAIN; - if (first_cpu) { - /* We haven't started the transition yet. */ - goto out; - } - break; - } - - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; - - if (first_cpu) { - rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); - if (msr == (oldmsr & 0xffff)) { - dprintk("no change needed - msr was and needs " - "to be %x\n", oldmsr); - retval = 0; - goto out; - } - - freqs.old = extract_clock(oldmsr, cpu, 0); - freqs.new = extract_clock(msr, cpu, 0); - - dprintk("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, - CPUFREQ_PRECHANGE); - } - - first_cpu = 0; - /* all but 16 LSB are reserved, treat them with care */ - oldmsr &= ~0xffff; - msr &= 0xffff; - oldmsr |= msr; - } - - wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - break; - - cpumask_set_cpu(j, covered_cpus); - } - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - if (unlikely(retval)) { - /* - * We have failed halfway through the frequency change. - * We have sent callbacks to policy->cpus and - * MSRs have already been written on coverd_cpus. - * Best effort undo.. - */ - - for_each_cpu(j, covered_cpus) - wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); - - tmp = freqs.new; - freqs.new = freqs.old; - freqs.old = tmp; - for_each_cpu(j, policy->cpus) { - if (!cpu_online(j)) - continue; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - } - retval = 0; - -out: - free_cpumask_var(covered_cpus); - return retval; -} - -static struct freq_attr* centrino_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver centrino_driver = { - .name = "centrino", /* should be speedstep-centrino, - but there's a 16 char limit */ - .init = centrino_cpu_init, - .exit = centrino_cpu_exit, - .verify = centrino_verify, - .target = centrino_target, - .get = get_cur_freq, - .attr = centrino_attr, - .owner = THIS_MODULE, -}; - - -/** - * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver - * - * Initializes the Enhanced SpeedStep support. Returns -ENODEV on - * unsupported devices, -ENOENT if there's no voltage table for this - * particular CPU model, -EINVAL on problems during initiatization, - * and zero on success. - * - * This is quite picky. Not only does the CPU have to advertise the - * "est" flag in the cpuid capability flags, we look for a specific - * CPU model and stepping, and we need to have the exact model name in - * our voltage tables. That is, be paranoid about not releasing - * someone's valuable magic smoke. - */ -static int __init centrino_init(void) -{ - struct cpuinfo_x86 *cpu = &cpu_data(0); - - if (!cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - return cpufreq_register_driver(¢rino_driver); -} - -static void __exit centrino_exit(void) -{ - cpufreq_unregister_driver(¢rino_driver); -} - -MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); -MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(centrino_init); -module_exit(centrino_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c deleted file mode 100644 index 561758e..0000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * (C) 2001 Dave Jones, Arjan van de ven. - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information, and on Intel documentation - * for chipsets ICH2-M and ICH3-M. - * - * Many thanks to Ducrot Bruno for finding and fixing the last - * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler - * for extensive testing. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/sched.h> - -#include "speedstep-lib.h" - - -/* speedstep_chipset: - * It is necessary to know which chipset is used. As accesses to - * this device occur at various places in this module, we need a - * static struct pci_dev * pointing to that device. - */ -static struct pci_dev *speedstep_chipset_dev; - - -/* speedstep_processor - */ -static enum speedstep_processor speedstep_processor; - -static u32 pmbase; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-ich", msg) - - -/** - * speedstep_find_register - read the PMBASE address - * - * Returns: -ENODEV if no register could be found - */ -static int speedstep_find_register(void) -{ - if (!speedstep_chipset_dev) - return -ENODEV; - - /* get PMBASE */ - pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); - if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - pmbase &= 0xFFFFFFFE; - if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - dprintk("pmbase is 0x%x\n", pmbase); - return 0; -} - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - * Tries to change the SpeedStep state. Can be called from - * smp_call_function_single. - */ -static void speedstep_set_state(unsigned int state) -{ - u8 pm2_blk; - u8 value; - unsigned long flags; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - /* read state */ - value = inb(pmbase + 0x50); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - /* write new state */ - value &= 0xFE; - value |= state; - - dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); - - /* Disable bus master arbitration */ - pm2_blk = inb(pmbase + 0x20); - pm2_blk |= 0x01; - outb(pm2_blk, (pmbase + 0x20)); - - /* Actual transition */ - outb(value, (pmbase + 0x50)); - - /* Restore bus master arbitration */ - pm2_blk &= 0xfe; - outb(pm2_blk, (pmbase + 0x20)); - - /* check if transition was successful */ - value = inb(pmbase + 0x50); - - /* Enable IRQs */ - local_irq_restore(flags); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - if (state == (value & 0x1)) - dprintk("change to %u MHz succeeded\n", - speedstep_get_frequency(speedstep_processor) / 1000); - else - printk(KERN_ERR "cpufreq: change failed - I/O error\n"); - - return; -} - -/* Wrapper for smp_call_function_single. */ -static void _speedstep_set_state(void *_state) -{ - speedstep_set_state(*(unsigned int *)_state); -} - -/** - * speedstep_activate - activate SpeedStep control in the chipset - * - * Tries to activate the SpeedStep status and control registers. - * Returns -EINVAL on an unsupported chipset, and zero on success. - */ -static int speedstep_activate(void) -{ - u16 value = 0; - - if (!speedstep_chipset_dev) - return -EINVAL; - - pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); - if (!(value & 0x08)) { - value |= 0x08; - dprintk("activating SpeedStep (TM) registers\n"); - pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); - } - - return 0; -} - - -/** - * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic - * - * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to - * the LPC bridge / PM module which contains all power-management - * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected - * chipset, or zero on failure. - */ -static unsigned int speedstep_detect_chipset(void) -{ - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 4; /* 4-M */ - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 3; /* 3-M */ - - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) { - /* speedstep.c causes lockups on Dell Inspirons 8000 and - * 8100 which use a pretty old revision of the 82815 - * host brige. Abort on these systems. - */ - static struct pci_dev *hostbridge; - - hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - - if (!hostbridge) - return 2; /* 2-M */ - - if (hostbridge->revision < 5) { - dprintk("hostbridge does not support speedstep\n"); - speedstep_chipset_dev = NULL; - pci_dev_put(hostbridge); - return 0; - } - - pci_dev_put(hostbridge); - return 2; /* 2-M */ - } - - return 0; -} - -static void get_freq_data(void *_speed) -{ - unsigned int *speed = _speed; - - *speed = speedstep_get_frequency(speedstep_processor); -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - unsigned int speed; - - /* You're supposed to ensure CPU is online. */ - if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) - BUG(); - - dprintk("detected %u kHz as current frequency\n", speed); - return speed; -} - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0, policy_cpu; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - freqs.old = speedstep_get(policy_cpu); - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = policy->cpu; - - dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); - - /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, - true); - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - -struct get_freqs { - struct cpufreq_policy *policy; - int ret; -}; - -static void get_freqs_on_cpu(void *_get_freqs) -{ - struct get_freqs *get_freqs = _get_freqs; - - get_freqs->ret = - speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - &get_freqs->policy->cpuinfo.transition_latency, - &speedstep_set_state); -} - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int policy_cpu, speed; - struct get_freqs gf; - - /* only run on CPU to be set, or on its sibling */ -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - - /* detect low and high frequency and transition latency */ - gf.policy = policy; - smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); - if (gf.ret) - return gf.ret; - - /* get current speed setting */ - speed = speedstep_get(policy_cpu); - if (!speed) - return -EIO; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-ich", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - /* detect processor */ - speedstep_processor = speedstep_detect_processor(); - if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor " - "not found\n"); - return -ENODEV; - } - - /* detect chipset */ - if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not " - "(yet) available.\n"); - return -ENODEV; - } - - /* activate speedstep support */ - if (speedstep_activate()) { - pci_dev_put(speedstep_chipset_dev); - return -EINVAL; - } - - if (speedstep_find_register()) - return -ENODEV; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - pci_dev_put(speedstep_chipset_dev); - cpufreq_unregister_driver(&speedstep_driver); -} - - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " - "with ICH-M southbridges."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c deleted file mode 100644 index a94ec6b..0000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/tsc.h> -#include "speedstep-lib.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-lib", msg) - -#define PFX "speedstep-lib: " - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check; -#else -#define relaxed_check 0 -#endif - -/********************************************************************* - * GET PROCESSOR CORE SPEED IN KHZ * - *********************************************************************/ - -static unsigned int pentium3_get_frequency(enum speedstep_processor processor) -{ - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ - struct { - unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult[] = { - { 30, 0x01 }, - { 35, 0x05 }, - { 40, 0x02 }, - { 45, 0x06 }, - { 50, 0x00 }, - { 55, 0x04 }, - { 60, 0x0b }, - { 65, 0x0f }, - { 70, 0x09 }, - { 75, 0x0d }, - { 80, 0x0a }, - { 85, 0x26 }, - { 90, 0x20 }, - { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ - }; - - /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ - struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ - } msr_decode_fsb[] = { - { 66, 0x0 }, - { 100, 0x2 }, - { 133, 0x1 }, - { 0, 0xff} - }; - - u32 msr_lo, msr_tmp; - int i = 0, j = 0; - - /* read MSR 0x2a - we only need the low 32 bits */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - msr_tmp = msr_lo; - - /* decode the FSB */ - msr_tmp &= 0x00c0000; - msr_tmp >>= 18; - while (msr_tmp != msr_decode_fsb[i].bitmap) { - if (msr_decode_fsb[i].bitmap == 0xff) - return 0; - i++; - } - - /* decode the multiplier */ - if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { - dprintk("workaround for early PIIIs\n"); - msr_lo &= 0x03c00000; - } else - msr_lo &= 0x0bc00000; - msr_lo >>= 22; - while (msr_lo != msr_decode_mult[j].bitmap) { - if (msr_decode_mult[j].bitmap == 0xff) - return 0; - j++; - } - - dprintk("speed is %u\n", - (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - - return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; -} - - -static unsigned int pentiumM_get_frequency(void) -{ - u32 msr_lo, msr_tmp; - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - - /* see table B-2 of 24547212.pdf */ - if (msr_lo & 0x00040000) { - printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", - msr_lo, msr_tmp); - return 0; - } - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * 100 * 1000)); - - return msr_tmp * 100 * 1000; -} - -static unsigned int pentium_core_get_frequency(void) -{ - u32 fsb = 0; - u32 msr_lo, msr_tmp; - int ret; - - rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); - /* see table B-2 of 25366920.pdf */ - switch (msr_lo & 0x07) { - case 5: - fsb = 100000; - break; - case 1: - fsb = 133333; - break; - case 3: - fsb = 166667; - break; - case 2: - fsb = 200000; - break; - case 0: - fsb = 266667; - break; - case 4: - fsb = 333333; - break; - default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); - } - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", - msr_lo, msr_tmp); - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * fsb)); - - ret = (msr_tmp * fsb); - return ret; -} - - -static unsigned int pentium4_get_frequency(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - u32 msr_lo, msr_hi, mult; - unsigned int fsb = 0; - unsigned int ret; - u8 fsb_code; - - /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency - * to System Bus Frequency Ratio Field in the Processor Frequency - * Configuration Register of the MSR. Therefore the current - * frequency cannot be calculated and has to be measured. - */ - if (c->x86_model < 2) - return cpu_khz; - - rdmsr(0x2c, msr_lo, msr_hi); - - dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - - /* decode the FSB: see IA-32 Intel (C) Architecture Software - * Developer's Manual, Volume 3: System Prgramming Guide, - * revision #12 in Table B-1: MSRs in the Pentium 4 and - * Intel Xeon Processors, on page B-4 and B-5. - */ - fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } - - if (!fsb) - printk(KERN_DEBUG PFX "couldn't detect FSB speed. " - "Please send an e-mail to <linux@brodo.de>\n"); - - /* Multiplier. */ - mult = msr_lo >> 24; - - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", - fsb, mult, (fsb * mult)); - - ret = (fsb * mult); - return ret; -} - - -/* Warning: may get called from smp_call_function_single. */ -unsigned int speedstep_get_frequency(enum speedstep_processor processor) -{ - switch (processor) { - case SPEEDSTEP_CPU_PCORE: - return pentium_core_get_frequency(); - case SPEEDSTEP_CPU_PM: - return pentiumM_get_frequency(); - case SPEEDSTEP_CPU_P4D: - case SPEEDSTEP_CPU_P4M: - return pentium4_get_frequency(); - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - return pentium3_get_frequency(processor); - default: - return 0; - }; - return 0; -} -EXPORT_SYMBOL_GPL(speedstep_get_frequency); - - -/********************************************************************* - * DETECT SPEEDSTEP-CAPABLE PROCESSOR * - *********************************************************************/ - -unsigned int speedstep_detect_processor(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - u32 ebx, msr_lo, msr_hi; - - dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - - if ((c->x86_vendor != X86_VENDOR_INTEL) || - ((c->x86 != 6) && (c->x86 != 0xF))) - return 0; - - if (c->x86 == 0xF) { - /* Intel Mobile Pentium 4-M - * or Intel Mobile Pentium 4 with 533 MHz FSB */ - if (c->x86_model != 2) - return 0; - - ebx = cpuid_ebx(0x00000001); - ebx &= 0x000000FF; - - dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); - - switch (c->x86_mask) { - case 4: - /* - * B-stepping [M-P4-M] - * sample has ebx = 0x0f, production has 0x0e. - */ - if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_CPU_P4M; - break; - case 7: - /* - * C-stepping [M-P4-M] - * needs to have ebx=0x0e, else it's a celeron: - * cf. 25130917.pdf / page 7, footnote 5 even - * though 25072120.pdf / page 7 doesn't say - * samples are only of B-stepping... - */ - if (ebx == 0x0e) - return SPEEDSTEP_CPU_P4M; - break; - case 9: - /* - * D-stepping [M-P4-M or M-P4/533] - * - * this is totally strange: CPUID 0x0F29 is - * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. - * The latter need to be sorted out as they don't - * support speedstep. - * Celerons with CPUID 0x0F29 may have either - * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything - * specific. - * M-P4-Ms may have either ebx=0xe or 0xf [see above] - * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] - * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id - * string - */ - if ((ebx == 0x0e) || - (strstr(c->x86_model_id, - "Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_CPU_P4M; - break; - default: - break; - } - return 0; - } - - switch (c->x86_model) { - case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - * 0x06 for mobile PIII-M */ - ebx = cpuid_ebx(0x00000001); - dprintk("ebx is %x\n", ebx); - - ebx &= 0x000000FF; - - if (ebx != 0x06) - return 0; - - /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 - */ - return SPEEDSTEP_CPU_PIII_T; - - case 0x08: /* Intel PIII [Coppermine] */ - - /* all mobile PIII Coppermines have FSB 100 MHz - * ==> sort out a few desktop PIIIs. */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", - msr_lo, msr_hi); - msr_lo &= 0x00c0000; - if (msr_lo != 0x0080000) - return 0; - - /* - * If the processor is a mobile version, - * platform ID has bit 50 set - * it has SpeedStep technology if either - * bit 56 or 57 is set - */ - rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", - msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && - (relaxed_check ? 1 : (msr_hi & (3<<24)))) { - if (c->x86_mask == 0x01) { - dprintk("early PIII version\n"); - return SPEEDSTEP_CPU_PIII_C_EARLY; - } else - return SPEEDSTEP_CPU_PIII_C; - } - - default: - return 0; - } -} -EXPORT_SYMBOL_GPL(speedstep_detect_processor); - - -/********************************************************************* - * DETECT SPEEDSTEP SPEEDS * - *********************************************************************/ - -unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)) -{ - unsigned int prev_speed; - unsigned int ret = 0; - unsigned long flags; - struct timeval tv1, tv2; - - if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) - return -EINVAL; - - dprintk("trying to determine both speeds\n"); - - /* get current speed */ - prev_speed = speedstep_get_frequency(processor); - if (!prev_speed) - return -EIO; - - dprintk("previous speed is %u\n", prev_speed); - - local_irq_save(flags); - - /* switch to low state */ - set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_frequency(processor); - if (!*low_speed) { - ret = -EIO; - goto out; - } - - dprintk("low speed is %u\n", *low_speed); - - /* start latency measurement */ - if (transition_latency) - do_gettimeofday(&tv1); - - /* switch to high state */ - set_state(SPEEDSTEP_HIGH); - - /* end latency measurement */ - if (transition_latency) - do_gettimeofday(&tv2); - - *high_speed = speedstep_get_frequency(processor); - if (!*high_speed) { - ret = -EIO; - goto out; - } - - dprintk("high speed is %u\n", *high_speed); - - if (*low_speed == *high_speed) { - ret = -ENODEV; - goto out; - } - - /* switch to previous state, if necessary */ - if (*high_speed != prev_speed) - set_state(SPEEDSTEP_LOW); - - if (transition_latency) { - *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + - tv2.tv_usec - tv1.tv_usec; - dprintk("transition latency is %u uSec\n", *transition_latency); - - /* convert uSec to nSec and add 20% for safety reasons */ - *transition_latency *= 1200; - - /* check if the latency measurement is too high or too low - * and set it to a safe value (500uSec) in that case - */ - if (*transition_latency > 10000000 || - *transition_latency < 50000) { - printk(KERN_WARNING PFX "frequency transition " - "measured seems out of range (%u " - "nSec), falling back to a safe one of" - "%u nSec.\n", - *transition_latency, 500000); - *transition_latency = 500000; - } - } - -out: - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL_GPL(speedstep_get_freqs); - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, - "Don't do all checks for speedstep capability."); -#endif - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h deleted file mode 100644 index 70d9cea..0000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - - -/* processors */ -enum speedstep_processor { - SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ - SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ -/* the following processors are not speedstep-capable and are not auto-detected - * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_frequency() call. */ - SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ - SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ - SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ -}; - -/* speedstep states -- only two of them */ - -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 - - -/* detect a speedstep-capable processor */ -extern enum speedstep_processor speedstep_detect_processor(void); - -/* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); - - -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no - * cpufreq_notify_transition calls are initiated. - */ -extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c deleted file mode 100644 index 91bc25b..0000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - * Intel SpeedStep SMI driver. - * - * (C) 2003 Hiroshi Miura <miura@da-cha.org> - * - * Licensed under the terms of the GNU GPL License version 2. - * - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <asm/ist.h> - -#include "speedstep-lib.h" - -/* speedstep system management interface port/command. - * - * These parameters are got from IST-SMI BIOS call. - * If user gives it, these are used. - * - */ -static int smi_port; -static int smi_cmd; -static unsigned int smi_sig; - -/* info about the processor */ -static enum speedstep_processor speedstep_processor; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -#define GET_SPEEDSTEP_OWNER 0 -#define GET_SPEEDSTEP_STATE 1 -#define SET_SPEEDSTEP_STATE 2 -#define GET_SPEEDSTEP_FREQS 4 - -/* how often shall the SMI call be tried if it failed, e.g. because - * of DMA activity going on? */ -#define SMI_TRIES 5 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-smi", msg) - -/** - * speedstep_smi_ownership - */ -static int speedstep_smi_ownership(void) -{ - u32 command, result, magic, dummy; - u32 function = GET_SPEEDSTEP_OWNER; - unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - magic = virt_to_phys(magic_data); - - dprintk("trying to obtain ownership with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=D" (result), - "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) - : "memory" - ); - - dprintk("result is %x\n", result); - - return result; -} - -/** - * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. - * @low: the low frequency value is placed here - * @high: the high frequency value is placed here - * - * Only available on later SpeedStep-enabled systems, returns false results or - * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing - * shows that the latter occurs if !(ist_info.event & 0xFFFF). - */ -static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) -{ - u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state = 0; - u32 function = GET_SPEEDSTEP_FREQS; - - if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n"); - return -ENODEV; - } - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine frequencies with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=a" (result), - "=b" (high_mhz), - "=c" (low_mhz), - "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), - "b" (function), - "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("result %x, low_freq %u, high_freq %u\n", - result, low_mhz, high_mhz); - - /* abort if results are obviously incorrect... */ - if ((high_mhz + low_mhz) < 600) - return -EINVAL; - - *high = high_mhz * 1000; - *low = low_mhz * 1000; - - return result; -} - -/** - * speedstep_get_state - set the SpeedStep state - * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static int speedstep_get_state(void) -{ - u32 function = GET_SPEEDSTEP_STATE; - u32 result, state, edi, command, dummy; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine current setting with command %x " - "at port %x\n", command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=a" (result), - "=b" (state), "=D" (edi), - "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("state is %x, result is %x\n", state, result); - - return state & 1; -} - - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static void speedstep_set_state(unsigned int state) -{ - unsigned int result = 0, command, new_state, dummy; - unsigned long flags; - unsigned int function = SET_SPEEDSTEP_STATE; - unsigned int retry = 0; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to set frequency to state %u " - "with command %x at port %x\n", - state, command, smi_port); - - do { - if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", - retry, result); - mdelay(retry * 50); - } - retry++; - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=b" (new_state), "=D" (result), - "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - } while ((new_state != state) && (retry <= SMI_TRIES)); - - /* enable IRQs */ - local_irq_restore(flags); - - if (new_state == state) - dprintk("change to %u MHz succeeded after %u tries " - "with result %u\n", - (speedstep_freqs[new_state].frequency / 1000), - retry, result); - else - printk(KERN_ERR "cpufreq: change to state %u " - "failed with new_state %u and result %u\n", - state, new_state, result); - - return; -} - - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: new freq - * @relation: - * - * Sets a new CPUFreq policy/freq. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = 0; /* speedstep.c is UP only driver */ - - if (freqs.old == freqs.new) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int speed, state; - unsigned int *low, *high; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - result = speedstep_smi_ownership(); - if (result) { - dprintk("fails in acquiring ownership of a SMI interface.\n"); - return -EINVAL; - } - - /* detect low and high frequency */ - low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; - high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; - - result = speedstep_smi_get_freqs(low, high); - if (result) { - /* fall back to speedstep_lib.c dection mechanism: - * try both states out */ - dprintk("could not detect low and high frequencies " - "by SMI call.\n"); - result = speedstep_get_freqs(speedstep_processor, - low, high, - NULL, - &speedstep_set_state); - - if (result) { - dprintk("could not detect two different speeds" - " -- aborting.\n"); - return result; - } else - dprintk("workaround worked.\n"); - } - - /* get current speed setting */ - state = speedstep_get_state(); - speed = speedstep_freqs[state].frequency; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - if (cpu) - return -ENODEV; - return speedstep_get_frequency(speedstep_processor); -} - - -static int speedstep_resume(struct cpufreq_policy *policy) -{ - int result = speedstep_smi_ownership(); - - if (result) - dprintk("fails in re-acquiring ownership of a SMI interface.\n"); - - return result; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .resume = speedstep_resume, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * BIOS, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - speedstep_processor = speedstep_detect_processor(); - - switch (speedstep_processor) { - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - break; - default: - speedstep_processor = 0; - } - - if (!speedstep_processor) { - dprintk("No supported Intel CPU detected.\n"); - return -ENODEV; - } - - dprintk("signature:0x%.8lx, command:0x%.8lx, " - "event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, - ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM - sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( - (smi_port == 0) || (smi_cmd == 0))) - return -ENODEV; - - if (smi_sig == 1) - smi_sig = 0x47534943; - else - smi_sig = ist_info.signature; - - /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) - return -EINVAL; - else if (smi_port == 0) - smi_port = ist_info.command & 0xff; - - if ((smi_cmd > 0xff) || (smi_cmd < 0)) - return -EINVAL; - else if (smi_cmd == 0) - smi_cmd = (ist_info.command >> 16) & 0xff; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - cpufreq_unregister_driver(&speedstep_driver); -} - -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); - -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " - "-- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " - "-- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " - "SMI interface."); - -MODULE_AUTHOR("Hiroshi Miura"); -MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index df86bc8..1edf5ba 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -29,10 +29,10 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { + u64 misc_enable; + /* Unmask CPUID levels if masked: */ if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { - u64 misc_enable; - rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) { @@ -118,8 +118,6 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) * (model 2) with the same problem. */ if (c->x86 == 15) { - u64 misc_enable; - rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) { @@ -130,6 +128,19 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) } } #endif + + /* + * If fast string is not enabled in IA32_MISC_ENABLE for any reason, + * clear the fast string and enhanced fast string CPU capabilities. + */ + if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { + rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); + if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) { + printk(KERN_INFO "Disabled fast string operations\n"); + setup_clear_cpu_cap(X86_FEATURE_REP_GOOD); + setup_clear_cpu_cap(X86_FEATURE_ERMS); + } + } } #ifdef CONFIG_X86_32 @@ -400,12 +411,10 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) switch (c->x86_model) { case 5: - if (c->x86_mask == 0) { - if (l2 == 0) - p = "Celeron (Covington)"; - else if (l2 == 256) - p = "Mobile Pentium II (Dixon)"; - } + if (l2 == 0) + p = "Celeron (Covington)"; + else if (l2 == 256) + p = "Mobile Pentium II (Dixon)"; break; case 6: diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 1ce1af2..c105c53 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -327,7 +327,6 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) l3->subcaches[2] = sc2 = !(val & BIT(8)) + !(val & BIT(9)); l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13)); - l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1; l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } @@ -454,27 +453,16 @@ int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot, { int ret = 0; -#define SUBCACHE_MASK (3UL << 20) -#define SUBCACHE_INDEX 0xfff - - /* - * check whether this slot is already used or - * the index is already disabled - */ + /* check if @slot is already used or the index is already disabled */ ret = amd_get_l3_disable_slot(l3, slot); if (ret >= 0) return -EINVAL; - /* - * check whether the other slot has disabled the - * same index already - */ - if (index == amd_get_l3_disable_slot(l3, !slot)) + if (index > l3->indices) return -EINVAL; - /* do not allow writes outside of allowed bits */ - if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) || - ((index & SUBCACHE_INDEX) > l3->indices)) + /* check whether the other slot has disabled the same index already */ + if (index == amd_get_l3_disable_slot(l3, !slot)) return -EINVAL; amd_l3_disable_index(l3, cpu, slot, index); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 3385ea2..ff1ae9b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -105,20 +105,6 @@ static int cpu_missing; ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain); EXPORT_SYMBOL_GPL(x86_mce_decoder_chain); -static int default_decode_mce(struct notifier_block *nb, unsigned long val, - void *data) -{ - pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n"); - pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n"); - - return NOTIFY_STOP; -} - -static struct notifier_block mce_dec_nb = { - .notifier_call = default_decode_mce, - .priority = -1, -}; - /* MCA banks polled by the period polling timer for corrected events */ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL @@ -212,6 +198,8 @@ void mce_log(struct mce *mce) static void print_mce(struct mce *m) { + int ret = 0; + pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n", m->extcpu, m->mcgstatus, m->bank, m->status); @@ -239,7 +227,11 @@ static void print_mce(struct mce *m) * Print out human-readable details about the MCE error, * (if the CPU has an implementation for that) */ - atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); + ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); + if (ret == NOTIFY_STOP) + return; + + pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ @@ -590,7 +582,6 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) { mce_log(&m); atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m); - add_taint(TAINT_MACHINE_CHECK); } /* @@ -1722,8 +1713,6 @@ __setup("mce", mcheck_enable); int __init mcheck_init(void) { - atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb); - mcheck_intel_therm_init(); return 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 167f97b..bb0adad 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -509,6 +509,7 @@ recurse: out_free: if (b) { kobject_put(&b->kobj); + list_del(&b->miscj); kfree(b); } return err; diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 6f8c5e9..27c6251 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -187,8 +187,6 @@ static int therm_throt_process(bool new_event, int event, int level) this_cpu, level == CORE_LEVEL ? "Core" : "Package", state->count); - - add_taint(TAINT_MACHINE_CHECK); return 1; } if (old_event) { @@ -355,7 +353,6 @@ static void notify_thresholds(__u64 msr_val) static void intel_thermal_interrupt(void) { __u64 msr_val; - struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); rdmsrl(MSR_IA32_THERM_STATUS, msr_val); @@ -367,19 +364,19 @@ static void intel_thermal_interrupt(void) CORE_LEVEL) != 0) mce_log_therm_throt_event(CORE_THROTTLED | msr_val); - if (cpu_has(c, X86_FEATURE_PLN)) + if (this_cpu_has(X86_FEATURE_PLN)) if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, CORE_LEVEL) != 0) mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val); - if (cpu_has(c, X86_FEATURE_PTS)) { + if (this_cpu_has(X86_FEATURE_PTS)) { rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, PACKAGE_LEVEL) != 0) mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val); - if (cpu_has(c, X86_FEATURE_PLN)) + if (this_cpu_has(X86_FEATURE_PLN)) if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, @@ -393,7 +390,6 @@ static void unexpected_thermal_interrupt(void) { printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n", smp_processor_id()); - add_taint(TAINT_MACHINE_CHECK); } static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt; @@ -446,18 +442,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c) */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = lvtthmr_init; /* * The initial value of thermal LVT entries on all APs always reads * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI * sequence to them and LVT registers are reset to 0s except for * the mask bits which are set to 1s when APs receive INIT IPI. - * Always restore the value that BIOS has programmed on AP based on - * BSP's info we saved since BIOS is always setting the same value - * for all threads/cores + * If BIOS takes over the thermal interrupt and sets its interrupt + * delivery mode to SMI (not fixed), it restores the value that the + * BIOS has programmed on AP based on BSP's info we saved since BIOS + * is always setting the same value for all threads/cores. */ - apic_write(APIC_LVTTHMR, lvtthmr_init); + if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED) + apic_write(APIC_LVTTHMR, lvtthmr_init); - h = lvtthmr_init; if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index eed3673a..3a0338b 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -31,6 +31,7 @@ #include <asm/nmi.h> #include <asm/compat.h> #include <asm/smp.h> +#include <asm/alternative.h> #if 0 #undef wrmsrl @@ -363,12 +364,18 @@ again: return new_raw_count; } -/* using X86_FEATURE_PERFCTR_CORE to later implement ALTERNATIVE() here */ static inline int x86_pmu_addr_offset(int index) { - if (boot_cpu_has(X86_FEATURE_PERFCTR_CORE)) - return index << 1; - return index; + int offset; + + /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */ + alternative_io(ASM_NOP2, + "shll $1, %%eax", + X86_FEATURE_PERFCTR_CORE, + "=a" (offset), + "a" (index)); + + return offset; } static inline unsigned int x86_pmu_config_addr(int index) @@ -586,8 +593,12 @@ static int x86_setup_perfctr(struct perf_event *event) return -EOPNOTSUPP; } + /* + * Do not allow config1 (extended registers) to propagate, + * there's no sane user-space generalization yet: + */ if (attr->type == PERF_TYPE_RAW) - return x86_pmu_extra_regs(event->attr.config, event); + return 0; if (attr->type == PERF_TYPE_HW_CACHE) return set_ext_hw_attr(hwc, event); @@ -609,8 +620,8 @@ static int x86_setup_perfctr(struct perf_event *event) /* * Branch tracing: */ - if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) && - (hwc->sample_period == 1)) { + if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS && + !attr->freq && hwc->sample_period == 1) { /* BTS is not supported by this architecture. */ if (!x86_pmu.bts_active) return -EOPNOTSUPP; @@ -1284,6 +1295,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This generic handler doesn't seem to have any issues where the + * unmasking occurs so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) { /* @@ -1370,8 +1391,6 @@ perf_event_nmi_handler(struct notifier_block *self, return NOTIFY_DONE; } - apic_write(APIC_LVTPC, APIC_DM_NMI); - handled = x86_pmu.handle_irq(args->regs); if (!handled) return NOTIFY_DONE; @@ -1754,17 +1773,6 @@ static struct pmu pmu = { * callchain support */ -static void -backtrace_warning_symbol(void *data, char *msg, unsigned long symbol) -{ - /* Ignore warnings */ -} - -static void backtrace_warning(void *data, char *msg) -{ - /* Ignore warnings */ -} - static int backtrace_stack(void *data, char *name) { return 0; @@ -1778,8 +1786,6 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops backtrace_ops = { - .warning = backtrace_warning, - .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, .walk_stack = print_context_stack_bp, diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 461f62b..fe29c1d 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -8,7 +8,7 @@ static __initconst const u64 amd_hw_cache_event_ids [ C(L1D) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses */ - [ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */ + [ C(RESULT_MISS) ] = 0x0141, /* Data Cache Misses */ }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */ @@ -96,12 +96,14 @@ static __initconst const u64 amd_hw_cache_event_ids */ static const u64 amd_perfmon_event_map[] = { - [PERF_COUNT_HW_CPU_CYCLES] = 0x0076, - [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, - [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080, - [PERF_COUNT_HW_CACHE_MISSES] = 0x0081, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2, - [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3, + [PERF_COUNT_HW_CPU_CYCLES] = 0x0076, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080, + [PERF_COUNT_HW_CACHE_MISSES] = 0x0081, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00d0, /* "Decoder empty" event */ + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x00d1, /* "Dispatch stalls" event */ }; static u64 amd_pmu_event_map(int hw_event) @@ -427,7 +429,9 @@ static __initconst const struct x86_pmu amd_pmu = { * * Exceptions: * + * 0x000 FP PERF_CTL[3], PERF_CTL[5:3] (*) * 0x003 FP PERF_CTL[3] + * 0x004 FP PERF_CTL[3], PERF_CTL[5:3] (*) * 0x00B FP PERF_CTL[3] * 0x00D FP PERF_CTL[3] * 0x023 DE PERF_CTL[2:0] @@ -448,6 +452,8 @@ static __initconst const struct x86_pmu amd_pmu = { * 0x0DF LS PERF_CTL[5:0] * 0x1D6 EX PERF_CTL[5:0] * 0x1D8 EX PERF_CTL[5:0] + * + * (*) depending on the umask all FPU counters may be used */ static struct event_constraint amd_f15_PMC0 = EVENT_CONSTRAINT(0, 0x01, 0); @@ -460,18 +466,28 @@ static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0); static struct event_constraint * amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event) { - unsigned int event_code = amd_get_event_code(&event->hw); + struct hw_perf_event *hwc = &event->hw; + unsigned int event_code = amd_get_event_code(hwc); switch (event_code & AMD_EVENT_TYPE_MASK) { case AMD_EVENT_FP: switch (event_code) { + case 0x000: + if (!(hwc->config & 0x0000F000ULL)) + break; + if (!(hwc->config & 0x00000F00ULL)) + break; + return &amd_f15_PMC3; + case 0x004: + if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1) + break; + return &amd_f15_PMC3; case 0x003: case 0x00B: case 0x00D: return &amd_f15_PMC3; - default: - return &amd_f15_PMC53; } + return &amd_f15_PMC53; case AMD_EVENT_LS: case AMD_EVENT_DC: case AMD_EVENT_EX_LS: diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 8fc2b2c..41178c8 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -25,7 +25,7 @@ struct intel_percore { /* * Intel PerfMon, used on Core and later. */ -static const u64 intel_perfmon_event_map[] = +static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly = { [PERF_COUNT_HW_CPU_CYCLES] = 0x003c, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, @@ -36,7 +36,7 @@ static const u64 intel_perfmon_event_map[] = [PERF_COUNT_HW_BUS_CYCLES] = 0x013c, }; -static struct event_constraint intel_core_event_constraints[] = +static struct event_constraint intel_core_event_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */ INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ @@ -47,7 +47,7 @@ static struct event_constraint intel_core_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_core2_event_constraints[] = +static struct event_constraint intel_core2_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -70,7 +70,7 @@ static struct event_constraint intel_core2_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_nehalem_event_constraints[] = +static struct event_constraint intel_nehalem_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -86,19 +86,19 @@ static struct event_constraint intel_nehalem_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct extra_reg intel_nehalem_extra_regs[] = +static struct extra_reg intel_nehalem_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff), EVENT_EXTRA_END }; -static struct event_constraint intel_nehalem_percore_constraints[] = +static struct event_constraint intel_nehalem_percore_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0xb7, 0), EVENT_CONSTRAINT_END }; -static struct event_constraint intel_westmere_event_constraints[] = +static struct event_constraint intel_westmere_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -110,7 +110,7 @@ static struct event_constraint intel_westmere_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_snb_event_constraints[] = +static struct event_constraint intel_snb_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -123,21 +123,21 @@ static struct event_constraint intel_snb_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct extra_reg intel_westmere_extra_regs[] = +static struct extra_reg intel_westmere_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0xffff), EVENT_EXTRA_END }; -static struct event_constraint intel_westmere_percore_constraints[] = +static struct event_constraint intel_westmere_percore_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0xb7, 0), INTEL_EVENT_CONSTRAINT(0xbb, 0), EVENT_CONSTRAINT_END }; -static struct event_constraint intel_gen_event_constraints[] = +static struct event_constraint intel_gen_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids }, }, [ C(LL ) ] = { - /* - * TBD: Need Off-core Response Performance Monitoring support - */ [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids }, [ C(LL ) ] = { [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, /* * Use RFO, not WRITEBACK, because a write miss would typically occur * on RFO. */ [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */ - [ C(RESULT_ACCESS) ] = 0x01bb, - /* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids }; /* - * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3 + * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits; + * See IA32 SDM Vol 3B 30.6.1.3 */ -#define DMND_DATA_RD (1 << 0) -#define DMND_RFO (1 << 1) -#define DMND_WB (1 << 3) -#define PF_DATA_RD (1 << 4) -#define PF_DATA_RFO (1 << 5) -#define RESP_UNCORE_HIT (1 << 8) -#define RESP_MISS (0xf600) /* non uncore hit */ +#define NHM_DMND_DATA_RD (1 << 0) +#define NHM_DMND_RFO (1 << 1) +#define NHM_DMND_IFETCH (1 << 2) +#define NHM_DMND_WB (1 << 3) +#define NHM_PF_DATA_RD (1 << 4) +#define NHM_PF_DATA_RFO (1 << 5) +#define NHM_PF_IFETCH (1 << 6) +#define NHM_OFFCORE_OTHER (1 << 7) +#define NHM_UNCORE_HIT (1 << 8) +#define NHM_OTHER_CORE_HIT_SNP (1 << 9) +#define NHM_OTHER_CORE_HITM (1 << 10) + /* reserved */ +#define NHM_REMOTE_CACHE_FWD (1 << 12) +#define NHM_REMOTE_DRAM (1 << 13) +#define NHM_LOCAL_DRAM (1 << 14) +#define NHM_NON_DRAM (1 << 15) + +#define NHM_ALL_DRAM (NHM_REMOTE_DRAM|NHM_LOCAL_DRAM) + +#define NHM_DMND_READ (NHM_DMND_DATA_RD) +#define NHM_DMND_WRITE (NHM_DMND_RFO|NHM_DMND_WB) +#define NHM_DMND_PREFETCH (NHM_PF_DATA_RD|NHM_PF_DATA_RFO) + +#define NHM_L3_HIT (NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM) +#define NHM_L3_MISS (NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD) +#define NHM_L3_ACCESS (NHM_L3_HIT|NHM_L3_MISS) static __initconst const u64 nehalem_hw_cache_extra_regs [PERF_COUNT_HW_CACHE_MAX] @@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs { [ C(LL ) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_DATA_RD|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_L3_MISS, }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_RFO|DMND_WB|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_L3_MISS, }, [ C(OP_PREFETCH) ] = { - [ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_L3_MISS, }, } }; @@ -391,12 +408,12 @@ static __initconst const u64 nehalem_hw_cache_event_ids { [ C(L1D) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI */ - [ C(RESULT_MISS) ] = 0x0140, /* L1D_CACHE_LD.I_STATE */ + [ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS */ + [ C(RESULT_MISS) ] = 0x0151, /* L1D.REPL */ }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI */ - [ C(RESULT_MISS) ] = 0x0141, /* L1D_CACHE_ST.I_STATE */ + [ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES */ + [ C(RESULT_MISS) ] = 0x0251, /* L1D.M_REPL */ }, [ C(OP_PREFETCH) ] = { [ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS */ @@ -933,6 +950,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This handler doesn't seem to have any issues with the unmasking + * so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + intel_pmu_disable_all(); handled = intel_pmu_drain_bts_buffer(); status = intel_pmu_get_status(); @@ -998,6 +1025,9 @@ intel_bts_constraints(struct perf_event *event) struct hw_perf_event *hwc = &event->hw; unsigned int hw_event, bts_event; + if (event->attr.freq) + return NULL; + hw_event = hwc->config & INTEL_ARCH_EVENT_MASK; bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS); @@ -1305,7 +1335,7 @@ static void intel_clovertown_quirks(void) * AJ106 could possibly be worked around by not allowing LBR * usage from PEBS, including the fixup. * AJ68 could possibly be worked around by always programming - * a pebs_event_reset[0] value and coping with the lost events. + * a pebs_event_reset[0] value and coping with the lost events. * * But taken together it might just make sense to not enable PEBS on * these chips. @@ -1409,6 +1439,23 @@ static __init int intel_pmu_init(void) x86_pmu.percore_constraints = intel_nehalem_percore_constraints; x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.extra_regs = intel_nehalem_extra_regs; + + /* UOPS_ISSUED.STALLED_CYCLES */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1; + + if (ebx & 0x40) { + /* + * Erratum AAJ80 detected, we work it around by using + * the BR_MISP_EXEC.ANY event. This will over-count + * branch-misses, but it's still much better than the + * architectural event which is often completely bogus: + */ + intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + + pr_cont("erratum AAJ80 worked around, "); + } pr_cont("Nehalem events, "); break; @@ -1425,6 +1472,7 @@ static __init int intel_pmu_init(void) case 37: /* 32 nm nehalem, "Clarkdale" */ case 44: /* 32 nm nehalem, "Gulftown" */ + case 47: /* 32 nm Xeon E7 */ memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids, sizeof(hw_cache_event_ids)); memcpy(hw_cache_extra_regs, nehalem_hw_cache_extra_regs, @@ -1437,6 +1485,12 @@ static __init int intel_pmu_init(void) x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.pebs_constraints = intel_westmere_pebs_event_constraints; x86_pmu.extra_regs = intel_westmere_extra_regs; + + /* UOPS_ISSUED.STALLED_CYCLES */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1; + pr_cont("Westmere events, "); break; @@ -1448,6 +1502,12 @@ static __init int intel_pmu_init(void) x86_pmu.event_constraints = intel_snb_event_constraints; x86_pmu.pebs_constraints = intel_snb_pebs_events; + + /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_DISPATCHED.THREAD,c=1,i=1 to count stall cycles*/ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x18001b1; + pr_cont("SandyBridge events, "); break; diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index c2520e1..ead584f 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -468,7 +468,7 @@ static struct p4_event_bind p4_event_bind_map[] = { .opcode = P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED), .escr_msr = { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 }, .escr_emask = - P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS), + P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS), .cntr = { {12, 13, 16}, {14, 15, 17} }, }, [P4_EVENT_X87_ASSIST] = { @@ -912,8 +912,7 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) int idx, handled = 0; u64 val; - data.addr = 0; - data.raw = NULL; + perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); @@ -947,14 +946,23 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) if (!x86_perf_event_set_period(event)) continue; if (perf_event_overflow(event, 1, &data, regs)) - p4_pmu_disable_event(event); + x86_pmu_stop(event, 0); } - if (handled) { - /* p4 quirk: unmask it again */ - apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); + if (handled) inc_irq_stat(apic_perf_irqs); - } + + /* + * When dealing with the unmasking of the LVTPC on P4 perf hw, it has + * been observed that the OVF bit flag has to be cleared first _before_ + * the LVTPC can be unmasked. + * + * The reason is the NMI line will continue to be asserted while the OVF + * bit is set. This causes a second NMI to generate if the LVTPC is + * unmasked before the OVF bit is cleared, leading to unknown NMI + * messages. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); return handled; } @@ -1188,7 +1196,7 @@ static __init int p4_pmu_init(void) { unsigned int low, high; - /* If we get stripped -- indexig fails */ + /* If we get stripped -- indexing fails */ BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC); rdmsr(MSR_IA32_MISC_ENABLE, low, high); diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 706a9fb..e90f084 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); - return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); + return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr); } static void __init ioapic_add_ofnode(struct device_node *np) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index e2a3f06..f478ff6 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -135,20 +135,6 @@ print_context_stack_bp(struct thread_info *tinfo, } EXPORT_SYMBOL_GPL(print_context_stack_bp); - -static void -print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) -{ - printk(data); - print_symbol(msg, symbol); - printk("\n"); -} - -static void print_trace_warning(void *data, char *msg) -{ - printk("%s%s\n", (char *)data, msg); -} - static int print_trace_stack(void *data, char *name) { printk("%s <%s> ", (char *)data, name); @@ -166,8 +152,6 @@ static void print_trace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops print_trace_ops = { - .warning = print_trace_warning, - .warning_symbol = print_trace_warning_symbol, .stack = print_trace_stack, .address = print_trace_address, .walk_stack = print_context_stack, diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index a93742a..0ba15a6 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -260,9 +260,9 @@ do_ftrace_mod_code(unsigned long ip, void *new_code) return mod_code_status; } -static unsigned char *ftrace_nop_replace(void) +static const unsigned char *ftrace_nop_replace(void) { - return ideal_nop5; + return ideal_nops[NOP_ATOMIC5]; } static int diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index d6d6bb3..3bb0850 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -23,7 +23,6 @@ static void __init i386_default_early_setup(void) { /* Initialize 32bit specific setup functions */ - x86_init.resources.probe_roms = probe_roms; x86_init.resources.reserve_resources = i386_reserve_resources; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index bfe8f72..6781765 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -217,7 +217,7 @@ static void hpet_reserve_platform_timers(unsigned int id) { } /* * Common hpet info */ -static unsigned long hpet_period; +static unsigned long hpet_freq; static void hpet_legacy_set_mode(enum clock_event_mode mode, struct clock_event_device *evt); @@ -232,7 +232,6 @@ static struct clock_event_device hpet_clockevent = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = hpet_legacy_set_mode, .set_next_event = hpet_legacy_next_event, - .shift = 32, .irq = 0, .rating = 50, }; @@ -290,28 +289,12 @@ static void hpet_legacy_clockevent_register(void) hpet_enable_legacy_int(); /* - * The mult factor is defined as (include/linux/clockchips.h) - * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) - * hpet_period is in units of femtoseconds (per cycle), so - * mult/2^shift = cyc/ns = 10^6/hpet_period - * mult = (10^6 * 2^shift)/hpet_period - * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period - */ - hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, - hpet_period, hpet_clockevent.shift); - /* Calculate the min / max delta */ - hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &hpet_clockevent); - /* Setup minimum reprogramming delta. */ - hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, - &hpet_clockevent); - - /* * Start hpet with the boot cpu mask and make it * global after the IO_APIC has been initialized. */ hpet_clockevent.cpumask = cpumask_of(smp_processor_id()); - clockevents_register_device(&hpet_clockevent); + clockevents_config_and_register(&hpet_clockevent, hpet_freq, + HPET_MIN_PROG_DELTA, 0x7FFFFFFF); global_clock_event = &hpet_clockevent; printk(KERN_DEBUG "hpet clockevent registered\n"); } @@ -549,7 +532,6 @@ static int hpet_setup_irq(struct hpet_dev *dev) static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu) { struct clock_event_device *evt = &hdev->evt; - uint64_t hpet_freq; WARN_ON(cpu != smp_processor_id()); if (!(hdev->flags & HPET_DEV_VALID)) @@ -571,24 +553,10 @@ static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu) evt->set_mode = hpet_msi_set_mode; evt->set_next_event = hpet_msi_next_event; - evt->shift = 32; - - /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. - */ - hpet_freq = FSEC_PER_SEC; - do_div(hpet_freq, hpet_period); - evt->mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, evt->shift); - /* Calculate the max delta */ - evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt); - /* 5 usec minimum reprogramming delta. */ - evt->min_delta_ns = 5000; - evt->cpumask = cpumask_of(hdev->cpu); - clockevents_register_device(evt); + + clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA, + 0x7FFFFFFF); } #ifdef CONFIG_HPET @@ -792,7 +760,6 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { u64 start, now; - u64 hpet_freq; cycle_t t1; /* Start the counter */ @@ -819,24 +786,7 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* - * The definition of mult is (include/linux/clocksource.h) - * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc - * so we first need to convert hpet_period to ns/cyc units: - * mult/2^shift = ns/cyc = hpet_period/10^6 - * mult = (hpet_period * 2^shift)/10^6 - * mult = (hpet_period << shift)/FSEC_PER_NSEC - */ - - /* Need to convert hpet_period (fsec/cyc) to cyc/sec: - * - * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc) - * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period - */ - hpet_freq = FSEC_PER_SEC; - do_div(hpet_freq, hpet_period); clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); - return 0; } @@ -845,7 +795,9 @@ static int hpet_clocksource_register(void) */ int __init hpet_enable(void) { + unsigned long hpet_period; unsigned int id; + u64 freq; int i; if (!is_hpet_capable()) @@ -884,6 +836,14 @@ int __init hpet_enable(void) goto out_nohpet; /* + * The period is a femto seconds value. Convert it to a + * frequency. + */ + freq = FSEC_PER_SEC; + do_div(freq, hpet_period); + hpet_freq = freq; + + /* * Read the HPET ID register to retrieve the IRQ routing * information and the number of channels */ diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c index 2dfd315..fb66dc9 100644 --- a/arch/x86/kernel/i8253.c +++ b/arch/x86/kernel/i8253.c @@ -93,7 +93,6 @@ static struct clock_event_device pit_ce = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = init_pit_timer, .set_next_event = pit_next_event, - .shift = 32, .irq = 0, }; @@ -108,90 +107,12 @@ void __init setup_pit_timer(void) * IO_APIC has been initialized. */ pit_ce.cpumask = cpumask_of(smp_processor_id()); - pit_ce.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, pit_ce.shift); - pit_ce.max_delta_ns = clockevent_delta2ns(0x7FFF, &pit_ce); - pit_ce.min_delta_ns = clockevent_delta2ns(0xF, &pit_ce); - clockevents_register_device(&pit_ce); + clockevents_config_and_register(&pit_ce, CLOCK_TICK_RATE, 0xF, 0x7FFF); global_clock_event = &pit_ce; } #ifndef CONFIG_X86_64 -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(struct clocksource *cs) -{ - static int old_count; - static u32 old_jifs; - unsigned long flags; - int count; - u32 jifs; - - raw_spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_pit(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_pit(PIT_CH0); /* read the latched count */ - count |= inb_pit(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_pit(0x34, PIT_MODE); - outb_pit(LATCH & 0xff, PIT_CH0); - outb_pit(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource pit_cs = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - static int __init init_pit_clocksource(void) { /* @@ -205,10 +126,7 @@ static int __init init_pit_clocksource(void) pit_ce.mode != CLOCK_EVT_MODE_PERIODIC) return 0; - pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift); - - return clocksource_register(&pit_cs); + return clocksource_i8253_init(); } arch_initcall(init_pit_clocksource); - #endif /* !CONFIG_X86_64 */ diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1cb0b9f..6c0802e 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -249,7 +249,7 @@ void fixup_irqs(void) data = irq_desc_get_irq_data(desc); affinity = data->affinity; - if (!irq_has_action(irq) || + if (!irq_has_action(irq) || irqd_is_per_cpu(data) || cpumask_subset(affinity, cpu_online_mask)) { raw_spin_unlock(&desc->lock); continue; @@ -276,7 +276,8 @@ void fixup_irqs(void) else if (!(warned++)) set_affinity = 0; - if (!irqd_can_move_in_process_context(data) && chip->irq_unmask) + if (!irqd_can_move_in_process_context(data) && + !irqd_irq_disabled(data) && chip->irq_unmask) chip->irq_unmask(data); raw_spin_unlock(&desc->lock); diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c index 961b6b3..3fee346 100644 --- a/arch/x86/kernel/jump_label.c +++ b/arch/x86/kernel/jump_label.c @@ -34,7 +34,7 @@ void arch_jump_label_transform(struct jump_entry *entry, code.offset = entry->target - (entry->code + JUMP_LABEL_NOP_SIZE); } else - memcpy(&code, ideal_nop5, JUMP_LABEL_NOP_SIZE); + memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE); get_online_cpus(); mutex_lock(&text_mutex); text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE); @@ -44,7 +44,8 @@ void arch_jump_label_transform(struct jump_entry *entry, void arch_jump_label_text_poke_early(jump_label_t addr) { - text_poke_early((void *)addr, ideal_nop5, JUMP_LABEL_NOP_SIZE); + text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5], + JUMP_LABEL_NOP_SIZE); } #endif diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index c969fd9..f1a6244 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -1183,12 +1183,13 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + unsigned long flags; /* This is possible if op is under delayed unoptimizing */ if (kprobe_disabled(&op->kp)) return; - preempt_disable(); + local_irq_save(flags); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); } else { @@ -1207,7 +1208,7 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, opt_pre_handler(&op->kp, regs); __this_cpu_write(current_kprobe, NULL); } - preempt_enable_no_resched(); + local_irq_restore(flags); } static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index f98d3ea..6389a6b 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -26,8 +26,6 @@ #include <asm/x86_init.h> #include <asm/reboot.h> -#define KVM_SCALE 22 - static int kvmclock = 1; static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; @@ -120,8 +118,6 @@ static struct clocksource kvm_clock = { .read = kvm_clock_get_cycles, .rating = 400, .mask = CLOCKSOURCE_MASK(64), - .mult = 1 << KVM_SCALE, - .shift = KVM_SCALE, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -203,7 +199,7 @@ void __init kvmclock_init(void) machine_ops.crash_shutdown = kvm_crash_shutdown; #endif kvm_get_preset_lpj(); - clocksource_register(&kvm_clock); + clocksource_register_hz(&kvm_clock, NSEC_PER_SEC); pv_info.paravirt_enabled = 1; pv_info.name = "KVM"; diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c index ab23f1a..52f256f 100644 --- a/arch/x86/kernel/module.c +++ b/arch/x86/kernel/module.c @@ -24,6 +24,7 @@ #include <linux/bug.h> #include <linux/mm.h> #include <linux/gfp.h> +#include <linux/jump_label.h> #include <asm/system.h> #include <asm/page.h> diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 5a532ce..6f9bfff 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -715,17 +715,15 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) } } -static int +static int __init check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) { - int ret = 0; - if (!mpc_new_phys || count <= mpc_new_length) { WARN(1, "update_mptable: No spare slots (length: %x)\n", count); return -1; } - return ret; + return 0; } #else /* CONFIG_X86_IO_APIC */ static diff --git a/arch/x86/kernel/pci-iommu_table.c b/arch/x86/kernel/pci-iommu_table.c index 55d745e..35ccf75 100644 --- a/arch/x86/kernel/pci-iommu_table.c +++ b/arch/x86/kernel/pci-iommu_table.c @@ -50,20 +50,14 @@ void __init check_iommu_entries(struct iommu_table_entry *start, struct iommu_table_entry *finish) { struct iommu_table_entry *p, *q, *x; - char sym_p[KSYM_SYMBOL_LEN]; - char sym_q[KSYM_SYMBOL_LEN]; /* Simple cyclic dependency checker. */ for (p = start; p < finish; p++) { q = find_dependents_of(start, finish, p); x = find_dependents_of(start, finish, q); if (p == x) { - sprint_symbol(sym_p, (unsigned long)p->detect); - sprint_symbol(sym_q, (unsigned long)q->detect); - - printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %s depends" \ - " on %s and vice-versa. BREAKING IT.\n", - sym_p, sym_q); + printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n", + p->detect, q->detect); /* Heavy handed way..*/ x->depend = 0; } @@ -72,12 +66,8 @@ void __init check_iommu_entries(struct iommu_table_entry *start, for (p = start; p < finish; p++) { q = find_dependents_of(p, finish, p); if (q && q > p) { - sprint_symbol(sym_p, (unsigned long)p->detect); - sprint_symbol(sym_q, (unsigned long)q->detect); - - printk(KERN_ERR "EXECUTION ORDER INVALID! %s "\ - "should be called before %s!\n", - sym_p, sym_q); + printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n", + p->detect, q->detect); } } } diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms.c index 071e7fe..ba0a4cc 100644 --- a/arch/x86/kernel/probe_roms_32.c +++ b/arch/x86/kernel/probe_roms.c @@ -73,6 +73,107 @@ static struct resource video_rom_resource = { .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM }; +/* does this oprom support the given pci device, or any of the devices + * that the driver supports? + */ +static bool match_id(struct pci_dev *pdev, unsigned short vendor, unsigned short device) +{ + struct pci_driver *drv = pdev->driver; + const struct pci_device_id *id; + + if (pdev->vendor == vendor && pdev->device == device) + return true; + + for (id = drv ? drv->id_table : NULL; id && id->vendor; id++) + if (id->vendor == vendor && id->device == device) + break; + + return id && id->vendor; +} + +static bool probe_list(struct pci_dev *pdev, unsigned short vendor, + const unsigned char *rom_list) +{ + unsigned short device; + + do { + if (probe_kernel_address(rom_list, device) != 0) + device = 0; + + if (device && match_id(pdev, vendor, device)) + break; + + rom_list += 2; + } while (device); + + return !!device; +} + +static struct resource *find_oprom(struct pci_dev *pdev) +{ + struct resource *oprom = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources); i++) { + struct resource *res = &adapter_rom_resources[i]; + unsigned short offset, vendor, device, list, rev; + const unsigned char *rom; + + if (res->end == 0) + break; + + rom = isa_bus_to_virt(res->start); + if (probe_kernel_address(rom + 0x18, offset) != 0) + continue; + + if (probe_kernel_address(rom + offset + 0x4, vendor) != 0) + continue; + + if (probe_kernel_address(rom + offset + 0x6, device) != 0) + continue; + + if (match_id(pdev, vendor, device)) { + oprom = res; + break; + } + + if (probe_kernel_address(rom + offset + 0x8, list) == 0 && + probe_kernel_address(rom + offset + 0xc, rev) == 0 && + rev >= 3 && list && + probe_list(pdev, vendor, rom + offset + list)) { + oprom = res; + break; + } + } + + return oprom; +} + +void *pci_map_biosrom(struct pci_dev *pdev) +{ + struct resource *oprom = find_oprom(pdev); + + if (!oprom) + return NULL; + + return ioremap(oprom->start, resource_size(oprom)); +} +EXPORT_SYMBOL(pci_map_biosrom); + +void pci_unmap_biosrom(void __iomem *image) +{ + iounmap(image); +} +EXPORT_SYMBOL(pci_unmap_biosrom); + +size_t pci_biosrom_size(struct pci_dev *pdev) +{ + struct resource *oprom = find_oprom(pdev); + + return oprom ? resource_size(oprom) : 0; +} +EXPORT_SYMBOL(pci_biosrom_size); + #define ROMSIGNATURE 0xaa55 static int __init romsignature(const unsigned char *rom) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index d46cbe4..88a90a9 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -449,7 +449,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); void mwait_idle_with_hints(unsigned long ax, unsigned long cx) { if (!need_resched()) { - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR)) + if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); __monitor((void *)¤t_thread_info()->flags, 0, 0); @@ -465,7 +465,7 @@ static void mwait_idle(void) if (!need_resched()) { trace_power_start(POWER_CSTATE, 1, smp_processor_id()); trace_cpu_idle(1, smp_processor_id()); - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR)) + if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); __monitor((void *)¤t_thread_info()->flags, 0, 0); diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 45892dc..f65e5b5 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data) unsigned len, type; struct perf_event *bp; + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + data &= ~DR_CONTROL_RESERVED; old_dr7 = ptrace_get_dr7(thread->ptrace_bps); restore: @@ -655,6 +658,9 @@ restore: } goto restore; } + + ptrace_put_breakpoints(tsk); + return ((orig_ret < 0) ? orig_ret : rc); } @@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) if (n < HBP_NUM) { struct perf_event *bp; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + bp = thread->ptrace_bps[n]; if (!bp) - return 0; - val = bp->hw.info.address; + val = 0; + else + val = bp->hw.info.address; + + ptrace_put_breakpoints(tsk); } else if (n == 6) { val = thread->debugreg6; } else if (n == 7) { @@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, struct perf_event *bp; struct thread_struct *t = &tsk->thread; struct perf_event_attr attr; + int err = 0; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; if (!t->ptrace_bps[nr]) { ptrace_breakpoint_init(&attr); @@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, * writing for the user. And anyway this is the previous * behaviour. */ - if (IS_ERR(bp)) - return PTR_ERR(bp); + if (IS_ERR(bp)) { + err = PTR_ERR(bp); + goto put; + } t->ptrace_bps[nr] = bp; } else { - int err; - bp = t->ptrace_bps[nr]; attr = bp->attr; attr.bp_addr = addr; err = modify_user_hw_breakpoint(bp, &attr); - if (err) - return err; } - - return 0; +put: + ptrace_put_breakpoints(tsk); + return err; } /* diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S index 29092b3..1d5c46d 100644 --- a/arch/x86/kernel/reboot_32.S +++ b/arch/x86/kernel/reboot_32.S @@ -21,26 +21,26 @@ r_base = . /* Get our own relocated address */ call 1f 1: popl %ebx - subl $1b, %ebx + subl $(1b - r_base), %ebx /* Compute the equivalent real-mode segment */ movl %ebx, %ecx shrl $4, %ecx /* Patch post-real-mode segment jump */ - movw dispatch_table(%ebx,%eax,2),%ax - movw %ax, 101f(%ebx) - movw %cx, 102f(%ebx) + movw (dispatch_table - r_base)(%ebx,%eax,2),%ax + movw %ax, (101f - r_base)(%ebx) + movw %cx, (102f - r_base)(%ebx) /* Set up the IDT for real mode. */ - lidtl machine_real_restart_idt(%ebx) + lidtl (machine_real_restart_idt - r_base)(%ebx) /* * Set up a GDT from which we can load segment descriptors for real * mode. The GDT is not used in real mode; it is just needed here to * prepare the descriptors. */ - lgdtl machine_real_restart_gdt(%ebx) + lgdtl (machine_real_restart_gdt - r_base)(%ebx) /* * Load the data segment registers with 16-bit compatible values diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 5a0484a..c3050af 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - unsigned long flags; - #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -976,6 +974,11 @@ void __init setup_arch(char **cmdline_p) paging_init(); x86_init.paging.pagetable_setup_done(swapper_pg_dir); + if (boot_cpu_data.cpuid_level >= 0) { + /* A CPU has %cr4 if and only if it has CPUID */ + mmu_cr4_features = read_cr4(); + } + #ifdef CONFIG_X86_32 /* sync back kernel address range */ clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, @@ -1036,9 +1039,7 @@ void __init setup_arch(char **cmdline_p) mcheck_init(); - local_irq_save(flags); - arch_init_ideal_nop5(); - local_irq_restore(flags); + arch_init_ideal_nops(); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 513deac..013e7eb 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -194,14 +194,13 @@ static void native_stop_other_cpus(int wait) } /* - * Reschedule call back. Nothing to do, - * all the work is done automatically when - * we return from the interrupt. + * Reschedule call back. */ void smp_reschedule_interrupt(struct pt_regs *regs) { ack_APIC_irq(); inc_irq_stat(irq_resched_count); + scheduler_ipi(); /* * KVM uses this interrupt to force a cpu out of guest mode */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c2871d3..a3c430b 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1332,9 +1332,9 @@ static inline void mwait_play_dead(void) void *mwait_ptr; struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info); - if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c))) + if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c)) return; - if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH)) + if (!this_cpu_has(X86_FEATURE_CLFLSH)) return; if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF) return; diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 6515733..55d9bc0 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -9,15 +9,6 @@ #include <linux/uaccess.h> #include <asm/stacktrace.h> -static void save_stack_warning(void *data, char *msg) -{ -} - -static void -save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) -{ -} - static int save_stack_stack(void *data, char *name) { return 0; @@ -53,16 +44,12 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops save_stack_ops = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, .stack = save_stack_stack, .address = save_stack_address, .walk_stack = print_context_stack, }; static const struct stacktrace_ops save_stack_ops_nosched = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, .stack = save_stack_stack, .address = save_stack_address_nosched, .walk_stack = print_context_stack, diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index c11514e..6f164bd 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -35,7 +35,7 @@ void iommu_shutdown_noop(void) { } struct x86_init_ops x86_init __initdata = { .resources = { - .probe_roms = x86_init_noop, + .probe_roms = probe_roms, .reserve_resources = reserve_standard_io_resources, .memory_setup = default_machine_specific_memory_setup, }, @@ -61,6 +61,10 @@ struct x86_init_ops x86_init __initdata = { .banner = default_banner, }, + .mapping = { + .pagetable_reserve = native_pagetable_reserve, + }, + .paging = { .pagetable_setup_start = native_pagetable_setup_start, .pagetable_setup_done = native_pagetable_setup_done, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 58f517b..934b4c6 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2395,9 +2395,9 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, int i; entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; - for (i = 1; *nent < maxnent; ++i) { - if (entry[i - 1].eax == 0 && i != 2) - break; + for (i = 1; *nent < maxnent && i < 64; ++i) { + if (entry[i].eax == 0) + continue; do_cpuid_1_ent(&entry[i], function, i); entry[i].flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX; @@ -4958,12 +4958,6 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, best = e; break; } - /* - * Both basic or both extended? - */ - if (((e->function ^ function) & 0x80000000) == 0) - if (!best || e->function > best->function) - best = e; } return best; } @@ -4983,6 +4977,27 @@ not_found: return 36; } +/* + * If no match is found, check whether we exceed the vCPU's limit + * and return the content of the highest valid _standard_ leaf instead. + * This is to satisfy the CPUID specification. + */ +static struct kvm_cpuid_entry2* check_cpuid_limit(struct kvm_vcpu *vcpu, + u32 function, u32 index) +{ + struct kvm_cpuid_entry2 *maxlevel; + + maxlevel = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0); + if (!maxlevel || maxlevel->eax >= function) + return NULL; + if (function & 0x80000000) { + maxlevel = kvm_find_cpuid_entry(vcpu, 0, 0); + if (!maxlevel) + return NULL; + } + return kvm_find_cpuid_entry(vcpu, maxlevel->eax, index); +} + void kvm_emulate_cpuid(struct kvm_vcpu *vcpu) { u32 function, index; @@ -4995,6 +5010,10 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu) kvm_register_write(vcpu, VCPU_REGS_RCX, 0); kvm_register_write(vcpu, VCPU_REGS_RDX, 0); best = kvm_find_cpuid_entry(vcpu, function, index); + + if (!best) + best = check_cpuid_limit(vcpu, function, index); + if (best) { kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax); kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 1cd6089..e191c09 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -7,7 +7,7 @@ * kernel and insert a module (lg.ko) which allows us to run other Linux * kernels the same way we'd run processes. We call the first kernel the Host, * and the others the Guests. The program which sets up and configures Guests - * (such as the example in Documentation/lguest/lguest.c) is called the + * (such as the example in Documentation/virtual/lguest/lguest.c) is called the * Launcher. * * Secondly, we only run specially modified Guests, not normal kernels: setting @@ -913,8 +913,6 @@ static struct clocksource lguest_clock = { .rating = 200, .read = lguest_clock_read, .mask = CLOCKSOURCE_MASK(64), - .mult = 1 << 22, - .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -997,7 +995,7 @@ static void lguest_time_init(void) /* Set up the timer interrupt (0) to go to our simple timer routine */ irq_set_handler(0, lguest_time_irq); - clocksource_register(&lguest_clock); + clocksource_register_hz(&lguest_clock, NSEC_PER_SEC); /* We can't set cpumask in the initializer: damn C limitations! Set it * here and register our timer device. */ diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index aa4326b..f2145cf 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -1,5 +1,6 @@ #include <linux/linkage.h> #include <asm/dwarf2.h> +#include <asm/alternative-asm.h> /* * Zero a page. @@ -14,6 +15,15 @@ ENTRY(clear_page_c) CFI_ENDPROC ENDPROC(clear_page_c) +ENTRY(clear_page_c_e) + CFI_STARTPROC + movl $4096,%ecx + xorl %eax,%eax + rep stosb + ret + CFI_ENDPROC +ENDPROC(clear_page_c_e) + ENTRY(clear_page) CFI_STARTPROC xorl %eax,%eax @@ -38,21 +48,26 @@ ENTRY(clear_page) .Lclear_page_end: ENDPROC(clear_page) - /* Some CPUs run faster using the string instructions. - It is also a lot simpler. Use this when possible */ + /* + * Some CPUs support enhanced REP MOVSB/STOSB instructions. + * It is recommended to use this when possible. + * If enhanced REP MOVSB/STOSB is not available, try to use fast string. + * Otherwise, use original function. + * + */ #include <asm/cpufeature.h> .section .altinstr_replacement,"ax" 1: .byte 0xeb /* jmp <disp8> */ .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */ -2: +2: .byte 0xeb /* jmp <disp8> */ + .byte (clear_page_c_e - clear_page) - (3f - 2b) /* offset */ +3: .previous .section .altinstructions,"a" - .align 8 - .quad clear_page - .quad 1b - .word X86_FEATURE_REP_GOOD - .byte .Lclear_page_end - clear_page - .byte 2b - 1b + altinstruction_entry clear_page,1b,X86_FEATURE_REP_GOOD,\ + .Lclear_page_end-clear_page, 2b-1b + altinstruction_entry clear_page,2b,X86_FEATURE_ERMS, \ + .Lclear_page_end-clear_page,3b-2b .previous diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 99e4826..0248402 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -15,23 +15,30 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/cpufeature.h> +#include <asm/alternative-asm.h> - .macro ALTERNATIVE_JUMP feature,orig,alt +/* + * By placing feature2 after feature1 in altinstructions section, we logically + * implement: + * If CPU has feature2, jmp to alt2 is used + * else if CPU has feature1, jmp to alt1 is used + * else jmp to orig is used. + */ + .macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2 0: .byte 0xe9 /* 32bit jump */ .long \orig-1f /* by default jump to orig */ 1: .section .altinstr_replacement,"ax" 2: .byte 0xe9 /* near jump with 32bit immediate */ - .long \alt-1b /* offset */ /* or alternatively to alt */ + .long \alt1-1b /* offset */ /* or alternatively to alt1 */ +3: .byte 0xe9 /* near jump with 32bit immediate */ + .long \alt2-1b /* offset */ /* or alternatively to alt2 */ .previous + .section .altinstructions,"a" - .align 8 - .quad 0b - .quad 2b - .word \feature /* when feature is set */ - .byte 5 - .byte 5 + altinstruction_entry 0b,2b,\feature1,5,5 + altinstruction_entry 0b,3b,\feature2,5,5 .previous .endm @@ -72,8 +79,10 @@ ENTRY(_copy_to_user) addq %rdx,%rcx jc bad_to_user cmpq TI_addr_limit(%rax),%rcx - jae bad_to_user - ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + ja bad_to_user + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \ + copy_user_generic_unrolled,copy_user_generic_string, \ + copy_user_enhanced_fast_string CFI_ENDPROC ENDPROC(_copy_to_user) @@ -85,8 +94,10 @@ ENTRY(_copy_from_user) addq %rdx,%rcx jc bad_from_user cmpq TI_addr_limit(%rax),%rcx - jae bad_from_user - ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string + ja bad_from_user + ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS, \ + copy_user_generic_unrolled,copy_user_generic_string, \ + copy_user_enhanced_fast_string CFI_ENDPROC ENDPROC(_copy_from_user) @@ -255,3 +266,37 @@ ENTRY(copy_user_generic_string) .previous CFI_ENDPROC ENDPROC(copy_user_generic_string) + +/* + * Some CPUs are adding enhanced REP MOVSB/STOSB instructions. + * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled. + * + * Input: + * rdi destination + * rsi source + * rdx count + * + * Output: + * eax uncopied bytes or 0 if successful. + */ +ENTRY(copy_user_enhanced_fast_string) + CFI_STARTPROC + andl %edx,%edx + jz 2f + movl %edx,%ecx +1: rep + movsb +2: xorl %eax,%eax + ret + + .section .fixup,"ax" +12: movl %ecx,%edx /* ecx is zerorest also */ + jmp copy_user_handle_tail + .previous + + .section __ex_table,"a" + .align 8 + .quad 1b,12b + .previous + CFI_ENDPROC +ENDPROC(copy_user_enhanced_fast_string) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 75ef61e..efbf2a0 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -4,6 +4,7 @@ #include <asm/cpufeature.h> #include <asm/dwarf2.h> +#include <asm/alternative-asm.h> /* * memcpy - Copy a memory block. @@ -37,6 +38,23 @@ .Lmemcpy_e: .previous +/* + * memcpy_c_e() - enhanced fast string memcpy. This is faster and simpler than + * memcpy_c. Use memcpy_c_e when possible. + * + * This gets patched over the unrolled variant (below) via the + * alternative instructions framework: + */ + .section .altinstr_replacement, "ax", @progbits +.Lmemcpy_c_e: + movq %rdi, %rax + + movl %edx, %ecx + rep movsb + ret +.Lmemcpy_e_e: + .previous + ENTRY(__memcpy) ENTRY(memcpy) CFI_STARTPROC @@ -49,7 +67,7 @@ ENTRY(memcpy) jb .Lhandle_tail /* - * We check whether memory false dependece could occur, + * We check whether memory false dependence could occur, * then jump to corresponding copy mode. */ cmp %dil, %sil @@ -171,21 +189,22 @@ ENDPROC(memcpy) ENDPROC(__memcpy) /* - * Some CPUs run faster using the string copy instructions. - * It is also a lot simpler. Use this when possible: - */ - - .section .altinstructions, "a" - .align 8 - .quad memcpy - .quad .Lmemcpy_c - .word X86_FEATURE_REP_GOOD - - /* + * Some CPUs are adding enhanced REP MOVSB/STOSB feature + * If the feature is supported, memcpy_c_e() is the first choice. + * If enhanced rep movsb copy is not available, use fast string copy + * memcpy_c() when possible. This is faster and code is simpler than + * original memcpy(). + * Otherwise, original memcpy() is used. + * In .altinstructions section, ERMS feature is placed after REG_GOOD + * feature to implement the right patch order. + * * Replace only beginning, memcpy is used to apply alternatives, * so it is silly to overwrite itself with nops - reboot is the * only outcome... */ - .byte .Lmemcpy_e - .Lmemcpy_c - .byte .Lmemcpy_e - .Lmemcpy_c + .section .altinstructions, "a" + altinstruction_entry memcpy,.Lmemcpy_c,X86_FEATURE_REP_GOOD,\ + .Lmemcpy_e-.Lmemcpy_c,.Lmemcpy_e-.Lmemcpy_c + altinstruction_entry memcpy,.Lmemcpy_c_e,X86_FEATURE_ERMS, \ + .Lmemcpy_e_e-.Lmemcpy_c_e,.Lmemcpy_e_e-.Lmemcpy_c_e .previous diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S index 0ecb843..d0ec9c2 100644 --- a/arch/x86/lib/memmove_64.S +++ b/arch/x86/lib/memmove_64.S @@ -8,6 +8,7 @@ #define _STRING_C #include <linux/linkage.h> #include <asm/dwarf2.h> +#include <asm/cpufeature.h> #undef memmove @@ -24,6 +25,7 @@ */ ENTRY(memmove) CFI_STARTPROC + /* Handle more 32bytes in loop */ mov %rdi, %rax cmp $0x20, %rdx @@ -31,8 +33,13 @@ ENTRY(memmove) /* Decide forward/backward copy mode */ cmp %rdi, %rsi - jb 2f + jge .Lmemmove_begin_forward + mov %rsi, %r8 + add %rdx, %r8 + cmp %rdi, %r8 + jg 2f +.Lmemmove_begin_forward: /* * movsq instruction have many startup latency * so we handle small size by general register. @@ -78,6 +85,8 @@ ENTRY(memmove) rep movsq movq %r11, (%r10) jmp 13f +.Lmemmove_end_forward: + /* * Handle data backward by movsq. */ @@ -194,4 +203,22 @@ ENTRY(memmove) 13: retq CFI_ENDPROC + + .section .altinstr_replacement,"ax" +.Lmemmove_begin_forward_efs: + /* Forward moving data. */ + movq %rdx, %rcx + rep movsb + retq +.Lmemmove_end_forward_efs: + .previous + + .section .altinstructions,"a" + .align 8 + .quad .Lmemmove_begin_forward + .quad .Lmemmove_begin_forward_efs + .word X86_FEATURE_ERMS + .byte .Lmemmove_end_forward-.Lmemmove_begin_forward + .byte .Lmemmove_end_forward_efs-.Lmemmove_begin_forward_efs + .previous ENDPROC(memmove) diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S index 09d3442..79bd454 100644 --- a/arch/x86/lib/memset_64.S +++ b/arch/x86/lib/memset_64.S @@ -2,9 +2,13 @@ #include <linux/linkage.h> #include <asm/dwarf2.h> +#include <asm/cpufeature.h> +#include <asm/alternative-asm.h> /* - * ISO C memset - set a memory block to a byte value. + * ISO C memset - set a memory block to a byte value. This function uses fast + * string to get better performance than the original function. The code is + * simpler and shorter than the orignal function as well. * * rdi destination * rsi value (char) @@ -31,6 +35,28 @@ .Lmemset_e: .previous +/* + * ISO C memset - set a memory block to a byte value. This function uses + * enhanced rep stosb to override the fast string function. + * The code is simpler and shorter than the fast string function as well. + * + * rdi destination + * rsi value (char) + * rdx count (bytes) + * + * rax original destination + */ + .section .altinstr_replacement, "ax", @progbits +.Lmemset_c_e: + movq %rdi,%r9 + movb %sil,%al + movl %edx,%ecx + rep stosb + movq %r9,%rax + ret +.Lmemset_e_e: + .previous + ENTRY(memset) ENTRY(__memset) CFI_STARTPROC @@ -112,16 +138,20 @@ ENTRY(__memset) ENDPROC(memset) ENDPROC(__memset) - /* Some CPUs run faster using the string instructions. - It is also a lot simpler. Use this when possible */ - -#include <asm/cpufeature.h> - + /* Some CPUs support enhanced REP MOVSB/STOSB feature. + * It is recommended to use this when possible. + * + * If enhanced REP MOVSB/STOSB feature is not available, use fast string + * instructions. + * + * Otherwise, use original memset function. + * + * In .altinstructions section, ERMS feature is placed after REG_GOOD + * feature to implement the right patch order. + */ .section .altinstructions,"a" - .align 8 - .quad memset - .quad .Lmemset_c - .word X86_FEATURE_REP_GOOD - .byte .Lfinal - memset - .byte .Lmemset_e - .Lmemset_c + altinstruction_entry memset,.Lmemset_c,X86_FEATURE_REP_GOOD,\ + .Lfinal-memset,.Lmemset_e-.Lmemset_c + altinstruction_entry memset,.Lmemset_c_e,X86_FEATURE_ERMS, \ + .Lfinal-memset,.Lmemset_e_e-.Lmemset_c_e .previous diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 3e608ed..3d11327 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -23,8 +23,8 @@ mmiotrace-y := kmmio.o pf_in.o mmio-mod.o obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o -obj-$(CONFIG_AMD_NUMA) += amdtopology_64.o -obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o +obj-$(CONFIG_AMD_NUMA) += amdtopology.o +obj-$(CONFIG_ACPI_NUMA) += srat.o obj-$(CONFIG_NUMA_EMU) += numa_emulation.o obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology.c index 0919c26..5247d01 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/nodemask.h> #include <linux/memblock.h> +#include <linux/bootmem.h> #include <asm/io.h> #include <linux/pci_ids.h> @@ -69,10 +70,10 @@ static __init void early_get_boot_cpu_id(void) int __init amd_numa_init(void) { - unsigned long start = PFN_PHYS(0); - unsigned long end = PFN_PHYS(max_pfn); + u64 start = PFN_PHYS(0); + u64 end = PFN_PHYS(max_pfn); unsigned numnodes; - unsigned long prevbase; + u64 prevbase; int i, j, nb; u32 nodeid, reg; unsigned int bits, cores, apicid_base; @@ -95,7 +96,7 @@ int __init amd_numa_init(void) prevbase = 0; for (i = 0; i < 8; i++) { - unsigned long base, limit; + u64 base, limit; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); @@ -107,18 +108,18 @@ int __init amd_numa_init(void) continue; } if (nodeid >= numnodes) { - pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid, + pr_info("Ignoring excess node %d (%Lx:%Lx)\n", nodeid, base, limit); continue; } if (!limit) { - pr_info("Skipping node entry %d (base %lx)\n", + pr_info("Skipping node entry %d (base %Lx)\n", i, base); continue; } if ((base >> 8) & 3 || (limit >> 8) & 3) { - pr_err("Node %d using interleaving mode %lx/%lx\n", + pr_err("Node %d using interleaving mode %Lx/%Lx\n", nodeid, (base >> 8) & 3, (limit >> 8) & 3); return -EINVAL; } @@ -150,19 +151,19 @@ int __init amd_numa_init(void) continue; } if (limit < base) { - pr_err("Node %d bogus settings %lx-%lx.\n", + pr_err("Node %d bogus settings %Lx-%Lx.\n", nodeid, base, limit); continue; } /* Could sort here, but pun for now. Should not happen anyroads. */ if (prevbase > base) { - pr_err("Node map not sorted %lx,%lx\n", + pr_err("Node map not sorted %Lx,%Lx\n", prevbase, base); return -EINVAL; } - pr_info("Node %d MemBase %016lx Limit %016lx\n", + pr_info("Node %d MemBase %016Lx Limit %016Lx\n", nodeid, base, limit); prevbase = base; diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 286d289..37b8b0f 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -81,6 +81,11 @@ static void __init find_early_table_space(unsigned long end, int use_pse, end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT); } +void __init native_pagetable_reserve(u64 start, u64 end) +{ + memblock_x86_reserve_range(start, end, "PGTABLE"); +} + struct map_range { unsigned long start; unsigned long end; @@ -272,9 +277,24 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, __flush_tlb_all(); + /* + * Reserve the kernel pagetable pages we used (pgt_buf_start - + * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top) + * so that they can be reused for other purposes. + * + * On native it just means calling memblock_x86_reserve_range, on Xen it + * also means marking RW the pagetable pages that we allocated before + * but that haven't been used. + * + * In fact on xen we mark RO the whole range pgt_buf_start - + * pgt_buf_top, because we have to make sure that when + * init_memory_mapping reaches the pagetable pages area, it maps + * RO all the pagetable pages, including the ones that are beyond + * pgt_buf_end at that time. + */ if (!after_bootmem && pgt_buf_end > pgt_buf_start) - memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT, - pgt_buf_end << PAGE_SHIFT, "PGTABLE"); + x86_init.mapping.pagetable_reserve(PFN_PHYS(pgt_buf_start), + PFN_PHYS(pgt_buf_end)); if (!after_bootmem) early_memtest(start, end); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 80088f9..29f7c6d 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -678,8 +678,10 @@ static void __init zone_sizes_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); +#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; +#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_HIGHMEM max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; @@ -716,6 +718,7 @@ void __init paging_init(void) * NOTE: at this point the bootmem allocator is fully available. */ olpc_dt_build_devicetree(); + sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); zone_sizes_init(); } diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 7942335..d865c4a 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -616,7 +616,9 @@ void __init paging_init(void) unsigned long max_zone_pfns[MAX_NR_ZONES]; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); +#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN; +#endif max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; max_zone_pfns[ZONE_NORMAL] = max_pfn; @@ -679,14 +681,6 @@ int arch_add_memory(int nid, u64 start, u64 size) } EXPORT_SYMBOL_GPL(arch_add_memory); -#if !defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA) -int memory_add_physaddr_to_nid(u64 start) -{ - return 0; -} -EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); -#endif - #endif /* CONFIG_MEMORY_HOTPLUG */ static struct kcore_list kcore_vsyscall; diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 0369843..be1ef57 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -91,13 +91,6 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return (__force void __iomem *)phys_to_virt(phys_addr); /* - * Check if the request spans more than any BAR in the iomem resource - * tree. - */ - WARN_ONCE(iomem_map_sanity_check(phys_addr, size), - KERN_INFO "Info: mapping multiple BARs. Your kernel is fine."); - - /* * Don't allow anybody to remap normal RAM that we're using.. */ last_pfn = last_addr >> PAGE_SHIFT; @@ -170,6 +163,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, ret_addr = (void __iomem *) (vaddr + offset); mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); + /* + * Check if the request spans more than any BAR in the iomem resource + * tree. + */ + WARN_ONCE(iomem_map_sanity_check(unaligned_phys_addr, unaligned_size), + KERN_INFO "Info: mapping multiple BARs. Your kernel is fine."); + return ret_addr; err_free_area: free_vm_area(area); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 9559d36..f5510d8 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -1,11 +1,39 @@ /* Common code for 32 and 64-bit NUMA */ -#include <linux/topology.h> -#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/init.h> #include <linux/bootmem.h> -#include <asm/numa.h> +#include <linux/memblock.h> +#include <linux/mmzone.h> +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/nodemask.h> +#include <linux/sched.h> +#include <linux/topology.h> + +#include <asm/e820.h> +#include <asm/proto.h> +#include <asm/dma.h> #include <asm/acpi.h> +#include <asm/amd_nb.h> + +#include "numa_internal.h" int __initdata numa_off; +nodemask_t numa_nodes_parsed __initdata; + +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; +EXPORT_SYMBOL(node_data); + +static struct numa_meminfo numa_meminfo +#ifndef CONFIG_MEMORY_HOTPLUG +__initdata +#endif +; + +static int numa_distance_cnt; +static u8 *numa_distance; static __init int numa_setup(char *opt) { @@ -32,6 +60,15 @@ s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; +int __cpuinit numa_cpu_node(int cpu) +{ + int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); + + if (apicid != BAD_APICID) + return __apicid_to_node[apicid]; + return NUMA_NO_NODE; +} + cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; EXPORT_SYMBOL(node_to_cpumask_map); @@ -95,6 +132,407 @@ void __init setup_node_to_cpumask_map(void) pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids); } +static int __init numa_add_memblk_to(int nid, u64 start, u64 end, + struct numa_meminfo *mi) +{ + /* ignore zero length blks */ + if (start == end) + return 0; + + /* whine about and ignore invalid blks */ + if (start > end || nid < 0 || nid >= MAX_NUMNODES) { + pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n", + nid, start, end); + return 0; + } + + if (mi->nr_blks >= NR_NODE_MEMBLKS) { + pr_err("NUMA: too many memblk ranges\n"); + return -EINVAL; + } + + mi->blk[mi->nr_blks].start = start; + mi->blk[mi->nr_blks].end = end; + mi->blk[mi->nr_blks].nid = nid; + mi->nr_blks++; + return 0; +} + +/** + * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo + * @idx: Index of memblk to remove + * @mi: numa_meminfo to remove memblk from + * + * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and + * decrementing @mi->nr_blks. + */ +void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) +{ + mi->nr_blks--; + memmove(&mi->blk[idx], &mi->blk[idx + 1], + (mi->nr_blks - idx) * sizeof(mi->blk[0])); +} + +/** + * numa_add_memblk - Add one numa_memblk to numa_meminfo + * @nid: NUMA node ID of the new memblk + * @start: Start address of the new memblk + * @end: End address of the new memblk + * + * Add a new memblk to the default numa_meminfo. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int __init numa_add_memblk(int nid, u64 start, u64 end) +{ + return numa_add_memblk_to(nid, start, end, &numa_meminfo); +} + +/* Initialize NODE_DATA for a node on the local memory */ +static void __init setup_node_data(int nid, u64 start, u64 end) +{ + const u64 nd_low = PFN_PHYS(MAX_DMA_PFN); + const u64 nd_high = PFN_PHYS(max_pfn_mapped); + const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE); + bool remapped = false; + u64 nd_pa; + void *nd; + int tnid; + + /* + * Don't confuse VM with a node that doesn't have the + * minimum amount of memory: + */ + if (end && (end - start) < NODE_MIN_SIZE) + return; + + /* initialize remap allocator before aligning to ZONE_ALIGN */ + init_alloc_remap(nid, start, end); + + start = roundup(start, ZONE_ALIGN); + + printk(KERN_INFO "Initmem setup node %d %016Lx-%016Lx\n", + nid, start, end); + + /* + * Allocate node data. Try remap allocator first, node-local + * memory and then any node. Never allocate in DMA zone. + */ + nd = alloc_remap(nid, nd_size); + if (nd) { + nd_pa = __pa(nd); + remapped = true; + } else { + nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high, + nd_size, SMP_CACHE_BYTES); + if (nd_pa == MEMBLOCK_ERROR) + nd_pa = memblock_find_in_range(nd_low, nd_high, + nd_size, SMP_CACHE_BYTES); + if (nd_pa == MEMBLOCK_ERROR) { + pr_err("Cannot find %zu bytes in node %d\n", + nd_size, nid); + return; + } + memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA"); + nd = __va(nd_pa); + } + + /* report and initialize */ + printk(KERN_INFO " NODE_DATA [%016Lx - %016Lx]%s\n", + nd_pa, nd_pa + nd_size - 1, remapped ? " (remapped)" : ""); + tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT); + if (!remapped && tnid != nid) + printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid); + + node_data[nid] = nd; + memset(NODE_DATA(nid), 0, sizeof(pg_data_t)); + NODE_DATA(nid)->node_id = nid; + NODE_DATA(nid)->node_start_pfn = start >> PAGE_SHIFT; + NODE_DATA(nid)->node_spanned_pages = (end - start) >> PAGE_SHIFT; + + node_set_online(nid); +} + +/** + * numa_cleanup_meminfo - Cleanup a numa_meminfo + * @mi: numa_meminfo to clean up + * + * Sanitize @mi by merging and removing unncessary memblks. Also check for + * conflicts and clear unused memblks. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int __init numa_cleanup_meminfo(struct numa_meminfo *mi) +{ + const u64 low = 0; + const u64 high = PFN_PHYS(max_pfn); + int i, j, k; + + /* first, trim all entries */ + for (i = 0; i < mi->nr_blks; i++) { + struct numa_memblk *bi = &mi->blk[i]; + + /* make sure all blocks are inside the limits */ + bi->start = max(bi->start, low); + bi->end = min(bi->end, high); + + /* and there's no empty block */ + if (bi->start >= bi->end) + numa_remove_memblk_from(i--, mi); + } + + /* merge neighboring / overlapping entries */ + for (i = 0; i < mi->nr_blks; i++) { + struct numa_memblk *bi = &mi->blk[i]; + + for (j = i + 1; j < mi->nr_blks; j++) { + struct numa_memblk *bj = &mi->blk[j]; + u64 start, end; + + /* + * See whether there are overlapping blocks. Whine + * about but allow overlaps of the same nid. They + * will be merged below. + */ + if (bi->end > bj->start && bi->start < bj->end) { + if (bi->nid != bj->nid) { + pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n", + bi->nid, bi->start, bi->end, + bj->nid, bj->start, bj->end); + return -EINVAL; + } + pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n", + bi->nid, bi->start, bi->end, + bj->start, bj->end); + } + + /* + * Join together blocks on the same node, holes + * between which don't overlap with memory on other + * nodes. + */ + if (bi->nid != bj->nid) + continue; + start = min(bi->start, bj->start); + end = max(bi->end, bj->end); + for (k = 0; k < mi->nr_blks; k++) { + struct numa_memblk *bk = &mi->blk[k]; + + if (bi->nid == bk->nid) + continue; + if (start < bk->end && end > bk->start) + break; + } + if (k < mi->nr_blks) + continue; + printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%Lx,%Lx)\n", + bi->nid, bi->start, bi->end, bj->start, bj->end, + start, end); + bi->start = start; + bi->end = end; + numa_remove_memblk_from(j--, mi); + } + } + + /* clear unused ones */ + for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) { + mi->blk[i].start = mi->blk[i].end = 0; + mi->blk[i].nid = NUMA_NO_NODE; + } + + return 0; +} + +/* + * Set nodes, which have memory in @mi, in *@nodemask. + */ +static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, + const struct numa_meminfo *mi) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mi->blk); i++) + if (mi->blk[i].start != mi->blk[i].end && + mi->blk[i].nid != NUMA_NO_NODE) + node_set(mi->blk[i].nid, *nodemask); +} + +/** + * numa_reset_distance - Reset NUMA distance table + * + * The current table is freed. The next numa_set_distance() call will + * create a new one. + */ +void __init numa_reset_distance(void) +{ + size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]); + + /* numa_distance could be 1LU marking allocation failure, test cnt */ + if (numa_distance_cnt) + memblock_x86_free_range(__pa(numa_distance), + __pa(numa_distance) + size); + numa_distance_cnt = 0; + numa_distance = NULL; /* enable table creation */ +} + +static int __init numa_alloc_distance(void) +{ + nodemask_t nodes_parsed; + size_t size; + int i, j, cnt = 0; + u64 phys; + + /* size the new table and allocate it */ + nodes_parsed = numa_nodes_parsed; + numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo); + + for_each_node_mask(i, nodes_parsed) + cnt = i; + cnt++; + size = cnt * cnt * sizeof(numa_distance[0]); + + phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped), + size, PAGE_SIZE); + if (phys == MEMBLOCK_ERROR) { + pr_warning("NUMA: Warning: can't allocate distance table!\n"); + /* don't retry until explicitly reset */ + numa_distance = (void *)1LU; + return -ENOMEM; + } + memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); + + numa_distance = __va(phys); + numa_distance_cnt = cnt; + + /* fill with the default distances */ + for (i = 0; i < cnt; i++) + for (j = 0; j < cnt; j++) + numa_distance[i * cnt + j] = i == j ? + LOCAL_DISTANCE : REMOTE_DISTANCE; + printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); + + return 0; +} + +/** + * numa_set_distance - Set NUMA distance from one NUMA to another + * @from: the 'from' node to set distance + * @to: the 'to' node to set distance + * @distance: NUMA distance + * + * Set the distance from node @from to @to to @distance. If distance table + * doesn't exist, one which is large enough to accommodate all the currently + * known nodes will be created. + * + * If such table cannot be allocated, a warning is printed and further + * calls are ignored until the distance table is reset with + * numa_reset_distance(). + * + * If @from or @to is higher than the highest known node at the time of + * table creation or @distance doesn't make sense, the call is ignored. + * This is to allow simplification of specific NUMA config implementations. + */ +void __init numa_set_distance(int from, int to, int distance) +{ + if (!numa_distance && numa_alloc_distance() < 0) + return; + + if (from >= numa_distance_cnt || to >= numa_distance_cnt) { + printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n", + from, to, distance); + return; + } + + if ((u8)distance != distance || + (from == to && distance != LOCAL_DISTANCE)) { + pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n", + from, to, distance); + return; + } + + numa_distance[from * numa_distance_cnt + to] = distance; +} + +int __node_distance(int from, int to) +{ + if (from >= numa_distance_cnt || to >= numa_distance_cnt) + return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE; + return numa_distance[from * numa_distance_cnt + to]; +} +EXPORT_SYMBOL(__node_distance); + +/* + * Sanity check to catch more bad NUMA configurations (they are amazingly + * common). Make sure the nodes cover all memory. + */ +static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) +{ + u64 numaram, e820ram; + int i; + + numaram = 0; + for (i = 0; i < mi->nr_blks; i++) { + u64 s = mi->blk[i].start >> PAGE_SHIFT; + u64 e = mi->blk[i].end >> PAGE_SHIFT; + numaram += e - s; + numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e); + if ((s64)numaram < 0) + numaram = 0; + } + + e820ram = max_pfn - (memblock_x86_hole_size(0, + PFN_PHYS(max_pfn)) >> PAGE_SHIFT); + /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ + if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) { + printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n", + (numaram << PAGE_SHIFT) >> 20, + (e820ram << PAGE_SHIFT) >> 20); + return false; + } + return true; +} + +static int __init numa_register_memblks(struct numa_meminfo *mi) +{ + int i, nid; + + /* Account for nodes with cpus and no memory */ + node_possible_map = numa_nodes_parsed; + numa_nodemask_from_meminfo(&node_possible_map, mi); + if (WARN_ON(nodes_empty(node_possible_map))) + return -EINVAL; + + for (i = 0; i < mi->nr_blks; i++) + memblock_x86_register_active_regions(mi->blk[i].nid, + mi->blk[i].start >> PAGE_SHIFT, + mi->blk[i].end >> PAGE_SHIFT); + + /* for out of order entries */ + sort_node_map(); + if (!numa_meminfo_cover_memory(mi)) + return -EINVAL; + + /* Finally register nodes. */ + for_each_node_mask(nid, node_possible_map) { + u64 start = PFN_PHYS(max_pfn); + u64 end = 0; + + for (i = 0; i < mi->nr_blks; i++) { + if (nid != mi->blk[i].nid) + continue; + start = min(mi->blk[i].start, start); + end = max(mi->blk[i].end, end); + } + + if (start < end) + setup_node_data(nid, start, end); + } + + return 0; +} + /* * There are unfortunately some poorly designed mainboards around that * only connect memory to a single CPU. This breaks the 1:1 cpu->node @@ -102,7 +540,7 @@ void __init setup_node_to_cpumask_map(void) * as the number of CPUs is not known yet. We round robin the existing * nodes. */ -void __init numa_init_array(void) +static void __init numa_init_array(void) { int rr, i; @@ -117,6 +555,95 @@ void __init numa_init_array(void) } } +static int __init numa_init(int (*init_func)(void)) +{ + int i; + int ret; + + for (i = 0; i < MAX_LOCAL_APIC; i++) + set_apicid_to_node(i, NUMA_NO_NODE); + + nodes_clear(numa_nodes_parsed); + nodes_clear(node_possible_map); + nodes_clear(node_online_map); + memset(&numa_meminfo, 0, sizeof(numa_meminfo)); + remove_all_active_ranges(); + numa_reset_distance(); + + ret = init_func(); + if (ret < 0) + return ret; + ret = numa_cleanup_meminfo(&numa_meminfo); + if (ret < 0) + return ret; + + numa_emulation(&numa_meminfo, numa_distance_cnt); + + ret = numa_register_memblks(&numa_meminfo); + if (ret < 0) + return ret; + + for (i = 0; i < nr_cpu_ids; i++) { + int nid = early_cpu_to_node(i); + + if (nid == NUMA_NO_NODE) + continue; + if (!node_online(nid)) + numa_clear_node(i); + } + numa_init_array(); + return 0; +} + +/** + * dummy_numa_init - Fallback dummy NUMA init + * + * Used if there's no underlying NUMA architecture, NUMA initialization + * fails, or NUMA is disabled on the command line. + * + * Must online at least one node and add memory blocks that cover all + * allowed memory. This function must not fail. + */ +static int __init dummy_numa_init(void) +{ + printk(KERN_INFO "%s\n", + numa_off ? "NUMA turned off" : "No NUMA configuration found"); + printk(KERN_INFO "Faking a node at %016Lx-%016Lx\n", + 0LLU, PFN_PHYS(max_pfn)); + + node_set(0, numa_nodes_parsed); + numa_add_memblk(0, 0, PFN_PHYS(max_pfn)); + + return 0; +} + +/** + * x86_numa_init - Initialize NUMA + * + * Try each configured NUMA initialization method until one succeeds. The + * last fallback is dummy single node config encomapssing whole memory and + * never fails. + */ +void __init x86_numa_init(void) +{ + if (!numa_off) { +#ifdef CONFIG_X86_NUMAQ + if (!numa_init(numaq_numa_init)) + return; +#endif +#ifdef CONFIG_ACPI_NUMA + if (!numa_init(x86_acpi_numa_init)) + return; +#endif +#ifdef CONFIG_AMD_NUMA + if (!numa_init(amd_numa_init)) + return; +#endif + } + + numa_init(dummy_numa_init); +} + static __init int find_near_online_node(int node) { int n, val; @@ -213,53 +740,48 @@ int early_cpu_to_node(int cpu) return per_cpu(x86_cpu_to_node_map, cpu); } -struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable) +void debug_cpumask_set_cpu(int cpu, int node, bool enable) { - int node = early_cpu_to_node(cpu); struct cpumask *mask; char buf[64]; if (node == NUMA_NO_NODE) { /* early_cpu_to_node() already emits a warning and trace */ - return NULL; + return; } mask = node_to_cpumask_map[node]; if (!mask) { pr_err("node_to_cpumask_map[%i] NULL\n", node); dump_stack(); - return NULL; + return; } + if (enable) + cpumask_set_cpu(cpu, mask); + else + cpumask_clear_cpu(cpu, mask); + cpulist_scnprintf(buf, sizeof(buf), mask); printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf); - return mask; + return; } # ifndef CONFIG_NUMA_EMU -static void __cpuinit numa_set_cpumask(int cpu, int enable) +static void __cpuinit numa_set_cpumask(int cpu, bool enable) { - struct cpumask *mask; - - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); + debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable); } void __cpuinit numa_add_cpu(int cpu) { - numa_set_cpumask(cpu, 1); + numa_set_cpumask(cpu, true); } void __cpuinit numa_remove_cpu(int cpu) { - numa_set_cpumask(cpu, 0); + numa_set_cpumask(cpu, false); } # endif /* !CONFIG_NUMA_EMU */ @@ -287,3 +809,18 @@ const struct cpumask *cpumask_of_node(int node) EXPORT_SYMBOL(cpumask_of_node); #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ + +#ifdef CONFIG_MEMORY_HOTPLUG +int memory_add_physaddr_to_nid(u64 start) +{ + struct numa_meminfo *mi = &numa_meminfo; + int nid = mi->blk[0].nid; + int i; + + for (i = 0; i < mi->nr_blks; i++) + if (mi->blk[i].start <= start && mi->blk[i].end > start) + nid = mi->blk[i].nid; + return nid; +} +EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); +#endif diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index bde3906..849a975 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -22,39 +22,11 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/mm.h> #include <linux/bootmem.h> #include <linux/memblock.h> -#include <linux/mmzone.h> -#include <linux/highmem.h> -#include <linux/initrd.h> -#include <linux/nodemask.h> #include <linux/module.h> -#include <linux/kexec.h> -#include <linux/pfn.h> -#include <linux/swap.h> -#include <linux/acpi.h> - -#include <asm/e820.h> -#include <asm/setup.h> -#include <asm/mmzone.h> -#include <asm/bios_ebda.h> -#include <asm/proto.h> - -struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; -EXPORT_SYMBOL(node_data); - -/* - * numa interface - we expect the numa architecture specific code to have - * populated the following initialisation. - * - * 1) node_online_map - the map of all nodes configured (online) in the system - * 2) node_start_pfn - the starting page frame number for a node - * 3) node_end_pfn - the ending page fram number for a node - */ -unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly; -unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly; +#include "numa_internal.h" #ifdef CONFIG_DISCONTIGMEM /* @@ -99,108 +71,46 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn, } #endif -extern unsigned long find_max_low_pfn(void); extern unsigned long highend_pfn, highstart_pfn; #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE) -unsigned long node_remap_size[MAX_NUMNODES]; static void *node_remap_start_vaddr[MAX_NUMNODES]; void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -static unsigned long kva_start_pfn; -static unsigned long kva_pages; - -int __cpuinit numa_cpu_node(int cpu) -{ - return apic->x86_32_numa_cpu_node(cpu); -} - -/* - * FLAT - support for basic PC memory model with discontig enabled, essentially - * a single node with all available processors in it with a flat - * memory map. - */ -int __init get_memcfg_numa_flat(void) -{ - printk(KERN_DEBUG "NUMA - single node, flat memory mode\n"); - - node_start_pfn[0] = 0; - node_end_pfn[0] = max_pfn; - memblock_x86_register_active_regions(0, 0, max_pfn); - memory_present(0, 0, max_pfn); - node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn); - - /* Indicate there is one node available. */ - nodes_clear(node_online_map); - node_set_online(0); - return 1; -} - -/* - * Find the highest page frame number we have available for the node - */ -static void __init propagate_e820_map_node(int nid) -{ - if (node_end_pfn[nid] > max_pfn) - node_end_pfn[nid] = max_pfn; - /* - * if a user has given mem=XXXX, then we need to make sure - * that the node _starts_ before that, too, not just ends - */ - if (node_start_pfn[nid] > max_pfn) - node_start_pfn[nid] = max_pfn; - BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]); -} - -/* - * Allocate memory for the pg_data_t for this node via a crude pre-bootmem - * method. For node zero take this from the bottom of memory, for - * subsequent nodes place them at node_remap_start_vaddr which contains - * node local data in physically node local memory. See setup_memory() - * for details. - */ -static void __init allocate_pgdat(int nid) -{ - char buf[16]; - - if (node_has_online_mem(nid) && node_remap_start_vaddr[nid]) - NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; - else { - unsigned long pgdat_phys; - pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT, - max_pfn_mapped<<PAGE_SHIFT, - sizeof(pg_data_t), - PAGE_SIZE); - NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT)); - memset(buf, 0, sizeof(buf)); - sprintf(buf, "NODE_DATA %d", nid); - memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf); - } - printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n", - nid, (unsigned long)NODE_DATA(nid)); -} - /* - * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel - * virtual address space (KVA) is reserved and portions of nodes are mapped - * using it. This is to allow node-local memory to be allocated for - * structures that would normally require ZONE_NORMAL. The memory is - * allocated with alloc_remap() and callers should be prepared to allocate - * from the bootmem allocator instead. + * Remap memory allocator */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; static void *node_remap_alloc_vaddr[MAX_NUMNODES]; -static unsigned long node_remap_offset[MAX_NUMNODES]; +/** + * alloc_remap - Allocate remapped memory + * @nid: NUMA node to allocate memory from + * @size: The size of allocation + * + * Allocate @size bytes from the remap area of NUMA node @nid. The + * size of the remap area is predetermined by init_alloc_remap() and + * only the callers considered there should call this function. For + * more info, please read the comment on top of init_alloc_remap(). + * + * The caller must be ready to handle allocation failure from this + * function and fall back to regular memory allocator in such cases. + * + * CONTEXT: + * Single CPU early boot context. + * + * RETURNS: + * Pointer to the allocated memory on success, %NULL on failure. + */ void *alloc_remap(int nid, unsigned long size) { void *allocation = node_remap_alloc_vaddr[nid]; size = ALIGN(size, L1_CACHE_BYTES); - if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid]) + if (!allocation || (allocation + size) > node_remap_end_vaddr[nid]) return NULL; node_remap_alloc_vaddr[nid] += size; @@ -209,26 +119,6 @@ void *alloc_remap(int nid, unsigned long size) return allocation; } -static void __init remap_numa_kva(void) -{ - void *vaddr; - unsigned long pfn; - int node; - - for_each_online_node(node) { - printk(KERN_DEBUG "remap_numa_kva: node %d\n", node); - for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) { - vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT); - printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n", - (unsigned long)vaddr, - node_remap_start_pfn[node] + pfn); - set_pmd_pfn((ulong) vaddr, - node_remap_start_pfn[node] + pfn, - PAGE_KERNEL_LARGE); - } - } -} - #ifdef CONFIG_HIBERNATION /** * resume_map_numa_kva - add KVA mapping to the temporary page tables created @@ -240,15 +130,16 @@ void resume_map_numa_kva(pgd_t *pgd_base) int node; for_each_online_node(node) { - unsigned long start_va, start_pfn, size, pfn; + unsigned long start_va, start_pfn, nr_pages, pfn; start_va = (unsigned long)node_remap_start_vaddr[node]; start_pfn = node_remap_start_pfn[node]; - size = node_remap_size[node]; + nr_pages = (node_remap_end_vaddr[node] - + node_remap_start_vaddr[node]) >> PAGE_SHIFT; printk(KERN_DEBUG "%s: node %d\n", __func__, node); - for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) { + for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) { unsigned long vaddr = start_va + (pfn << PAGE_SHIFT); pgd_t *pgd = pgd_base + pgd_index(vaddr); pud_t *pud = pud_offset(pgd, vaddr); @@ -264,132 +155,89 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static __init unsigned long calculate_numa_remap_pages(void) +/** + * init_alloc_remap - Initialize remap allocator for a NUMA node + * @nid: NUMA node to initizlie remap allocator for + * + * NUMA nodes may end up without any lowmem. As allocating pgdat and + * memmap on a different node with lowmem is inefficient, a special + * remap allocator is implemented which can be used by alloc_remap(). + * + * For each node, the amount of memory which will be necessary for + * pgdat and memmap is calculated and two memory areas of the size are + * allocated - one in the node and the other in lowmem; then, the area + * in the node is remapped to the lowmem area. + * + * As pgdat and memmap must be allocated in lowmem anyway, this + * doesn't waste lowmem address space; however, the actual lowmem + * which gets remapped over is wasted. The amount shouldn't be + * problematic on machines this feature will be used. + * + * Initialization failure isn't fatal. alloc_remap() is used + * opportunistically and the callers will fall back to other memory + * allocation mechanisms on failure. + */ +void __init init_alloc_remap(int nid, u64 start, u64 end) { - int nid; - unsigned long size, reserve_pages = 0; - - for_each_online_node(nid) { - u64 node_kva_target; - u64 node_kva_final; - - /* - * The acpi/srat node info can show hot-add memroy zones - * where memory could be added but not currently present. - */ - printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n", - nid, node_start_pfn[nid], node_end_pfn[nid]); - if (node_start_pfn[nid] > max_pfn) - continue; - if (!node_end_pfn[nid]) - continue; - if (node_end_pfn[nid] > max_pfn) - node_end_pfn[nid] = max_pfn; - - /* ensure the remap includes space for the pgdat. */ - size = node_remap_size[nid] + sizeof(pg_data_t); - - /* convert size to large (pmd size) pages, rounding up */ - size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES; - /* now the roundup is correct, convert to PAGE_SIZE pages */ - size = size * PTRS_PER_PTE; - - node_kva_target = round_down(node_end_pfn[nid] - size, - PTRS_PER_PTE); - node_kva_target <<= PAGE_SHIFT; - do { - node_kva_final = memblock_find_in_range(node_kva_target, - ((u64)node_end_pfn[nid])<<PAGE_SHIFT, - ((u64)size)<<PAGE_SHIFT, - LARGE_PAGE_BYTES); - node_kva_target -= LARGE_PAGE_BYTES; - } while (node_kva_final == MEMBLOCK_ERROR && - (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid])); - - if (node_kva_final == MEMBLOCK_ERROR) - panic("Can not get kva ram\n"); - - node_remap_size[nid] = size; - node_remap_offset[nid] = reserve_pages; - reserve_pages += size; - printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of" - " node %d at %llx\n", - size, nid, node_kva_final>>PAGE_SHIFT); - - /* - * prevent kva address below max_low_pfn want it on system - * with less memory later. - * layout will be: KVA address , KVA RAM - * - * we are supposed to only record the one less then max_low_pfn - * but we could have some hole in high memory, and it will only - * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide - * to use it as free. - * So memblock_x86_reserve_range here, hope we don't run out of that array - */ - memblock_x86_reserve_range(node_kva_final, - node_kva_final+(((u64)size)<<PAGE_SHIFT), - "KVA RAM"); - - node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT; - } - printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n", - reserve_pages); - return reserve_pages; -} + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long end_pfn = end >> PAGE_SHIFT; + unsigned long size, pfn; + u64 node_pa, remap_pa; + void *remap_va; -static void init_remap_allocator(int nid) -{ - node_remap_start_vaddr[nid] = pfn_to_kaddr( - kva_start_pfn + node_remap_offset[nid]); - node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] + - (node_remap_size[nid] * PAGE_SIZE); - node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] + - ALIGN(sizeof(pg_data_t), PAGE_SIZE); - - printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid, - (ulong) node_remap_start_vaddr[nid], - (ulong) node_remap_end_vaddr[nid]); + /* + * The acpi/srat node info can show hot-add memroy zones where + * memory could be added but not currently present. + */ + printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n", + nid, start_pfn, end_pfn); + + /* calculate the necessary space aligned to large page size */ + size = node_memmap_size_bytes(nid, start_pfn, end_pfn); + size += ALIGN(sizeof(pg_data_t), PAGE_SIZE); + size = ALIGN(size, LARGE_PAGE_BYTES); + + /* allocate node memory and the lowmem remap area */ + node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES); + if (node_pa == MEMBLOCK_ERROR) { + pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n", + size, nid); + return; + } + memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM"); + + remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT, + max_low_pfn << PAGE_SHIFT, + size, LARGE_PAGE_BYTES); + if (remap_pa == MEMBLOCK_ERROR) { + pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n", + size, nid); + memblock_x86_free_range(node_pa, node_pa + size); + return; + } + memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG"); + remap_va = phys_to_virt(remap_pa); + + /* perform actual remap */ + for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE) + set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT), + (node_pa >> PAGE_SHIFT) + pfn, + PAGE_KERNEL_LARGE); + + /* initialize remap allocator parameters */ + node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT; + node_remap_start_vaddr[nid] = remap_va; + node_remap_end_vaddr[nid] = remap_va + size; + node_remap_alloc_vaddr[nid] = remap_va; + + printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n", + nid, node_pa, node_pa + size, remap_va, remap_va + size); } void __init initmem_init(void) { - int nid; - long kva_target_pfn; - - /* - * When mapping a NUMA machine we allocate the node_mem_map arrays - * from node local memory. They are then mapped directly into KVA - * between zone normal and vmalloc space. Calculate the size of - * this space and use it to adjust the boundary between ZONE_NORMAL - * and ZONE_HIGHMEM. - */ - - get_memcfg_numa(); - numa_init_array(); - - kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE); + x86_numa_init(); - kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE); - do { - kva_start_pfn = memblock_find_in_range(kva_target_pfn<<PAGE_SHIFT, - max_low_pfn<<PAGE_SHIFT, - kva_pages<<PAGE_SHIFT, - PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT; - kva_target_pfn -= PTRS_PER_PTE; - } while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn); - - if (kva_start_pfn == MEMBLOCK_ERROR) - panic("Can not get kva space\n"); - - printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n", - kva_start_pfn, max_low_pfn); - printk(KERN_INFO "max_pfn = %lx\n", max_pfn); - - /* avoid clash with initrd */ - memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT, - (kva_start_pfn + kva_pages)<<PAGE_SHIFT, - "KVA PG"); #ifdef CONFIG_HIGHMEM highstart_pfn = highend_pfn = max_pfn; if (max_pfn > max_low_pfn) @@ -409,51 +257,9 @@ void __init initmem_init(void) printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n", (ulong) pfn_to_kaddr(max_low_pfn)); - for_each_online_node(nid) { - init_remap_allocator(nid); - - allocate_pgdat(nid); - } - remap_numa_kva(); printk(KERN_DEBUG "High memory starts at vaddr %08lx\n", (ulong) pfn_to_kaddr(highstart_pfn)); - for_each_online_node(nid) - propagate_e820_map_node(nid); - - for_each_online_node(nid) { - memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); - NODE_DATA(nid)->node_id = nid; - } setup_bootmem_allocator(); } - -#ifdef CONFIG_MEMORY_HOTPLUG -static int paddr_to_nid(u64 addr) -{ - int nid; - unsigned long pfn = PFN_DOWN(addr); - - for_each_node(nid) - if (node_start_pfn[nid] <= pfn && - pfn < node_end_pfn[nid]) - return nid; - - return -1; -} - -/* - * This function is used to ask node id BEFORE memmap and mem_section's - * initialization (pfn_to_nid() can't be used yet). - * If _PXM is not defined on ACPI's DSDT, node id must be found by this. - */ -int memory_add_physaddr_to_nid(u64 addr) -{ - int nid = paddr_to_nid(addr); - return (nid >= 0) ? nid : 0; -} - -EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); -#endif - diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index e8c00cc..dd27f40 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -2,646 +2,13 @@ * Generic VM initialization for x86-64 NUMA setups. * Copyright 2002,2003 Andi Kleen, SuSE Labs. */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/init.h> #include <linux/bootmem.h> -#include <linux/memblock.h> -#include <linux/mmzone.h> -#include <linux/ctype.h> -#include <linux/module.h> -#include <linux/nodemask.h> -#include <linux/sched.h> -#include <linux/acpi.h> - -#include <asm/e820.h> -#include <asm/proto.h> -#include <asm/dma.h> -#include <asm/acpi.h> -#include <asm/amd_nb.h> #include "numa_internal.h" -struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; -EXPORT_SYMBOL(node_data); - -nodemask_t numa_nodes_parsed __initdata; - -struct memnode memnode; - -static unsigned long __initdata nodemap_addr; -static unsigned long __initdata nodemap_size; - -static struct numa_meminfo numa_meminfo __initdata; - -static int numa_distance_cnt; -static u8 *numa_distance; - -/* - * Given a shift value, try to populate memnodemap[] - * Returns : - * 1 if OK - * 0 if memnodmap[] too small (of shift too small) - * -1 if node overlap or lost ram (shift too big) - */ -static int __init populate_memnodemap(const struct numa_meminfo *mi, int shift) -{ - unsigned long addr, end; - int i, res = -1; - - memset(memnodemap, 0xff, sizeof(s16)*memnodemapsize); - for (i = 0; i < mi->nr_blks; i++) { - addr = mi->blk[i].start; - end = mi->blk[i].end; - if (addr >= end) - continue; - if ((end >> shift) >= memnodemapsize) - return 0; - do { - if (memnodemap[addr >> shift] != NUMA_NO_NODE) - return -1; - memnodemap[addr >> shift] = mi->blk[i].nid; - addr += (1UL << shift); - } while (addr < end); - res = 1; - } - return res; -} - -static int __init allocate_cachealigned_memnodemap(void) -{ - unsigned long addr; - - memnodemap = memnode.embedded_map; - if (memnodemapsize <= ARRAY_SIZE(memnode.embedded_map)) - return 0; - - addr = 0x8000; - nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES); - nodemap_addr = memblock_find_in_range(addr, get_max_mapped(), - nodemap_size, L1_CACHE_BYTES); - if (nodemap_addr == MEMBLOCK_ERROR) { - printk(KERN_ERR - "NUMA: Unable to allocate Memory to Node hash map\n"); - nodemap_addr = nodemap_size = 0; - return -1; - } - memnodemap = phys_to_virt(nodemap_addr); - memblock_x86_reserve_range(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP"); - - printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", - nodemap_addr, nodemap_addr + nodemap_size); - return 0; -} - -/* - * The LSB of all start and end addresses in the node map is the value of the - * maximum possible shift. - */ -static int __init extract_lsb_from_nodes(const struct numa_meminfo *mi) -{ - int i, nodes_used = 0; - unsigned long start, end; - unsigned long bitfield = 0, memtop = 0; - - for (i = 0; i < mi->nr_blks; i++) { - start = mi->blk[i].start; - end = mi->blk[i].end; - if (start >= end) - continue; - bitfield |= start; - nodes_used++; - if (end > memtop) - memtop = end; - } - if (nodes_used <= 1) - i = 63; - else - i = find_first_bit(&bitfield, sizeof(unsigned long)*8); - memnodemapsize = (memtop >> i)+1; - return i; -} - -static int __init compute_hash_shift(const struct numa_meminfo *mi) -{ - int shift; - - shift = extract_lsb_from_nodes(mi); - if (allocate_cachealigned_memnodemap()) - return -1; - printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n", - shift); - - if (populate_memnodemap(mi, shift) != 1) { - printk(KERN_INFO "Your memory is not aligned you need to " - "rebuild your kernel with a bigger NODEMAPSIZE " - "shift=%d\n", shift); - return -1; - } - return shift; -} - -int __meminit __early_pfn_to_nid(unsigned long pfn) -{ - return phys_to_nid(pfn << PAGE_SHIFT); -} - -static void * __init early_node_mem(int nodeid, unsigned long start, - unsigned long end, unsigned long size, - unsigned long align) -{ - unsigned long mem; - - /* - * put it on high as possible - * something will go with NODE_DATA - */ - if (start < (MAX_DMA_PFN<<PAGE_SHIFT)) - start = MAX_DMA_PFN<<PAGE_SHIFT; - if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) && - end > (MAX_DMA32_PFN<<PAGE_SHIFT)) - start = MAX_DMA32_PFN<<PAGE_SHIFT; - mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align); - if (mem != MEMBLOCK_ERROR) - return __va(mem); - - /* extend the search scope */ - end = max_pfn_mapped << PAGE_SHIFT; - start = MAX_DMA_PFN << PAGE_SHIFT; - mem = memblock_find_in_range(start, end, size, align); - if (mem != MEMBLOCK_ERROR) - return __va(mem); - - printk(KERN_ERR "Cannot find %lu bytes in node %d\n", - size, nodeid); - - return NULL; -} - -static int __init numa_add_memblk_to(int nid, u64 start, u64 end, - struct numa_meminfo *mi) -{ - /* ignore zero length blks */ - if (start == end) - return 0; - - /* whine about and ignore invalid blks */ - if (start > end || nid < 0 || nid >= MAX_NUMNODES) { - pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n", - nid, start, end); - return 0; - } - - if (mi->nr_blks >= NR_NODE_MEMBLKS) { - pr_err("NUMA: too many memblk ranges\n"); - return -EINVAL; - } - - mi->blk[mi->nr_blks].start = start; - mi->blk[mi->nr_blks].end = end; - mi->blk[mi->nr_blks].nid = nid; - mi->nr_blks++; - return 0; -} - -/** - * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo - * @idx: Index of memblk to remove - * @mi: numa_meminfo to remove memblk from - * - * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and - * decrementing @mi->nr_blks. - */ -void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) -{ - mi->nr_blks--; - memmove(&mi->blk[idx], &mi->blk[idx + 1], - (mi->nr_blks - idx) * sizeof(mi->blk[0])); -} - -/** - * numa_add_memblk - Add one numa_memblk to numa_meminfo - * @nid: NUMA node ID of the new memblk - * @start: Start address of the new memblk - * @end: End address of the new memblk - * - * Add a new memblk to the default numa_meminfo. - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int __init numa_add_memblk(int nid, u64 start, u64 end) -{ - return numa_add_memblk_to(nid, start, end, &numa_meminfo); -} - -/* Initialize bootmem allocator for a node */ -void __init -setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) -{ - unsigned long start_pfn, last_pfn, nodedata_phys; - const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); - int nid; - - if (!end) - return; - - /* - * Don't confuse VM with a node that doesn't have the - * minimum amount of memory: - */ - if (end && (end - start) < NODE_MIN_SIZE) - return; - - start = roundup(start, ZONE_ALIGN); - - printk(KERN_INFO "Initmem setup node %d %016lx-%016lx\n", nodeid, - start, end); - - start_pfn = start >> PAGE_SHIFT; - last_pfn = end >> PAGE_SHIFT; - - node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size, - SMP_CACHE_BYTES); - if (node_data[nodeid] == NULL) - return; - nodedata_phys = __pa(node_data[nodeid]); - memblock_x86_reserve_range(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA"); - printk(KERN_INFO " NODE_DATA [%016lx - %016lx]\n", nodedata_phys, - nodedata_phys + pgdat_size - 1); - nid = phys_to_nid(nodedata_phys); - if (nid != nodeid) - printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nodeid, nid); - - memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t)); - NODE_DATA(nodeid)->node_id = nodeid; - NODE_DATA(nodeid)->node_start_pfn = start_pfn; - NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn; - - node_set_online(nodeid); -} - -/** - * numa_cleanup_meminfo - Cleanup a numa_meminfo - * @mi: numa_meminfo to clean up - * - * Sanitize @mi by merging and removing unncessary memblks. Also check for - * conflicts and clear unused memblks. - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int __init numa_cleanup_meminfo(struct numa_meminfo *mi) -{ - const u64 low = 0; - const u64 high = (u64)max_pfn << PAGE_SHIFT; - int i, j, k; - - for (i = 0; i < mi->nr_blks; i++) { - struct numa_memblk *bi = &mi->blk[i]; - - /* make sure all blocks are inside the limits */ - bi->start = max(bi->start, low); - bi->end = min(bi->end, high); - - /* and there's no empty block */ - if (bi->start == bi->end) { - numa_remove_memblk_from(i--, mi); - continue; - } - - for (j = i + 1; j < mi->nr_blks; j++) { - struct numa_memblk *bj = &mi->blk[j]; - unsigned long start, end; - - /* - * See whether there are overlapping blocks. Whine - * about but allow overlaps of the same nid. They - * will be merged below. - */ - if (bi->end > bj->start && bi->start < bj->end) { - if (bi->nid != bj->nid) { - pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n", - bi->nid, bi->start, bi->end, - bj->nid, bj->start, bj->end); - return -EINVAL; - } - pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n", - bi->nid, bi->start, bi->end, - bj->start, bj->end); - } - - /* - * Join together blocks on the same node, holes - * between which don't overlap with memory on other - * nodes. - */ - if (bi->nid != bj->nid) - continue; - start = max(min(bi->start, bj->start), low); - end = min(max(bi->end, bj->end), high); - for (k = 0; k < mi->nr_blks; k++) { - struct numa_memblk *bk = &mi->blk[k]; - - if (bi->nid == bk->nid) - continue; - if (start < bk->end && end > bk->start) - break; - } - if (k < mi->nr_blks) - continue; - printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n", - bi->nid, bi->start, bi->end, bj->start, bj->end, - start, end); - bi->start = start; - bi->end = end; - numa_remove_memblk_from(j--, mi); - } - } - - for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) { - mi->blk[i].start = mi->blk[i].end = 0; - mi->blk[i].nid = NUMA_NO_NODE; - } - - return 0; -} - -/* - * Set nodes, which have memory in @mi, in *@nodemask. - */ -static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, - const struct numa_meminfo *mi) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mi->blk); i++) - if (mi->blk[i].start != mi->blk[i].end && - mi->blk[i].nid != NUMA_NO_NODE) - node_set(mi->blk[i].nid, *nodemask); -} - -/** - * numa_reset_distance - Reset NUMA distance table - * - * The current table is freed. The next numa_set_distance() call will - * create a new one. - */ -void __init numa_reset_distance(void) -{ - size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]); - - /* numa_distance could be 1LU marking allocation failure, test cnt */ - if (numa_distance_cnt) - memblock_x86_free_range(__pa(numa_distance), - __pa(numa_distance) + size); - numa_distance_cnt = 0; - numa_distance = NULL; /* enable table creation */ -} - -static int __init numa_alloc_distance(void) -{ - nodemask_t nodes_parsed; - size_t size; - int i, j, cnt = 0; - u64 phys; - - /* size the new table and allocate it */ - nodes_parsed = numa_nodes_parsed; - numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo); - - for_each_node_mask(i, nodes_parsed) - cnt = i; - cnt++; - size = cnt * cnt * sizeof(numa_distance[0]); - - phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT, - size, PAGE_SIZE); - if (phys == MEMBLOCK_ERROR) { - pr_warning("NUMA: Warning: can't allocate distance table!\n"); - /* don't retry until explicitly reset */ - numa_distance = (void *)1LU; - return -ENOMEM; - } - memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); - - numa_distance = __va(phys); - numa_distance_cnt = cnt; - - /* fill with the default distances */ - for (i = 0; i < cnt; i++) - for (j = 0; j < cnt; j++) - numa_distance[i * cnt + j] = i == j ? - LOCAL_DISTANCE : REMOTE_DISTANCE; - printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); - - return 0; -} - -/** - * numa_set_distance - Set NUMA distance from one NUMA to another - * @from: the 'from' node to set distance - * @to: the 'to' node to set distance - * @distance: NUMA distance - * - * Set the distance from node @from to @to to @distance. If distance table - * doesn't exist, one which is large enough to accommodate all the currently - * known nodes will be created. - * - * If such table cannot be allocated, a warning is printed and further - * calls are ignored until the distance table is reset with - * numa_reset_distance(). - * - * If @from or @to is higher than the highest known node at the time of - * table creation or @distance doesn't make sense, the call is ignored. - * This is to allow simplification of specific NUMA config implementations. - */ -void __init numa_set_distance(int from, int to, int distance) -{ - if (!numa_distance && numa_alloc_distance() < 0) - return; - - if (from >= numa_distance_cnt || to >= numa_distance_cnt) { - printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n", - from, to, distance); - return; - } - - if ((u8)distance != distance || - (from == to && distance != LOCAL_DISTANCE)) { - pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n", - from, to, distance); - return; - } - - numa_distance[from * numa_distance_cnt + to] = distance; -} - -int __node_distance(int from, int to) -{ - if (from >= numa_distance_cnt || to >= numa_distance_cnt) - return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE; - return numa_distance[from * numa_distance_cnt + to]; -} -EXPORT_SYMBOL(__node_distance); - -/* - * Sanity check to catch more bad NUMA configurations (they are amazingly - * common). Make sure the nodes cover all memory. - */ -static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) -{ - unsigned long numaram, e820ram; - int i; - - numaram = 0; - for (i = 0; i < mi->nr_blks; i++) { - unsigned long s = mi->blk[i].start >> PAGE_SHIFT; - unsigned long e = mi->blk[i].end >> PAGE_SHIFT; - numaram += e - s; - numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e); - if ((long)numaram < 0) - numaram = 0; - } - - e820ram = max_pfn - (memblock_x86_hole_size(0, - max_pfn << PAGE_SHIFT) >> PAGE_SHIFT); - /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ - if ((long)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) { - printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n", - (numaram << PAGE_SHIFT) >> 20, - (e820ram << PAGE_SHIFT) >> 20); - return false; - } - return true; -} - -static int __init numa_register_memblks(struct numa_meminfo *mi) -{ - int i, nid; - - /* Account for nodes with cpus and no memory */ - node_possible_map = numa_nodes_parsed; - numa_nodemask_from_meminfo(&node_possible_map, mi); - if (WARN_ON(nodes_empty(node_possible_map))) - return -EINVAL; - - memnode_shift = compute_hash_shift(mi); - if (memnode_shift < 0) { - printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n"); - return -EINVAL; - } - - for (i = 0; i < mi->nr_blks; i++) - memblock_x86_register_active_regions(mi->blk[i].nid, - mi->blk[i].start >> PAGE_SHIFT, - mi->blk[i].end >> PAGE_SHIFT); - - /* for out of order entries */ - sort_node_map(); - if (!numa_meminfo_cover_memory(mi)) - return -EINVAL; - - /* Finally register nodes. */ - for_each_node_mask(nid, node_possible_map) { - u64 start = (u64)max_pfn << PAGE_SHIFT; - u64 end = 0; - - for (i = 0; i < mi->nr_blks; i++) { - if (nid != mi->blk[i].nid) - continue; - start = min(mi->blk[i].start, start); - end = max(mi->blk[i].end, end); - } - - if (start < end) - setup_node_bootmem(nid, start, end); - } - - return 0; -} - -/** - * dummy_numma_init - Fallback dummy NUMA init - * - * Used if there's no underlying NUMA architecture, NUMA initialization - * fails, or NUMA is disabled on the command line. - * - * Must online at least one node and add memory blocks that cover all - * allowed memory. This function must not fail. - */ -static int __init dummy_numa_init(void) -{ - printk(KERN_INFO "%s\n", - numa_off ? "NUMA turned off" : "No NUMA configuration found"); - printk(KERN_INFO "Faking a node at %016lx-%016lx\n", - 0LU, max_pfn << PAGE_SHIFT); - - node_set(0, numa_nodes_parsed); - numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); - - return 0; -} - -static int __init numa_init(int (*init_func)(void)) -{ - int i; - int ret; - - for (i = 0; i < MAX_LOCAL_APIC; i++) - set_apicid_to_node(i, NUMA_NO_NODE); - - nodes_clear(numa_nodes_parsed); - nodes_clear(node_possible_map); - nodes_clear(node_online_map); - memset(&numa_meminfo, 0, sizeof(numa_meminfo)); - remove_all_active_ranges(); - numa_reset_distance(); - - ret = init_func(); - if (ret < 0) - return ret; - ret = numa_cleanup_meminfo(&numa_meminfo); - if (ret < 0) - return ret; - - numa_emulation(&numa_meminfo, numa_distance_cnt); - - ret = numa_register_memblks(&numa_meminfo); - if (ret < 0) - return ret; - - for (i = 0; i < nr_cpu_ids; i++) { - int nid = early_cpu_to_node(i); - - if (nid == NUMA_NO_NODE) - continue; - if (!node_online(nid)) - numa_clear_node(i); - } - numa_init_array(); - return 0; -} - void __init initmem_init(void) { - int ret; - - if (!numa_off) { -#ifdef CONFIG_ACPI_NUMA - ret = numa_init(x86_acpi_numa_init); - if (!ret) - return; -#endif -#ifdef CONFIG_AMD_NUMA - ret = numa_init(amd_numa_init); - if (!ret) - return; -#endif - } - - numa_init(dummy_numa_init); + x86_numa_init(); } unsigned long __init numa_free_all_bootmem(void) @@ -656,12 +23,3 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } - -int __cpuinit numa_cpu_node(int cpu) -{ - int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); - - if (apicid != BAD_APICID) - return __apicid_to_node[apicid]; - return NUMA_NO_NODE; -} diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index ad091e4..d0ed086 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -5,6 +5,7 @@ #include <linux/errno.h> #include <linux/topology.h> #include <linux/memblock.h> +#include <linux/bootmem.h> #include <asm/dma.h> #include "numa_internal.h" @@ -84,7 +85,13 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, nr_nodes = MAX_NUMNODES; } - size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes; + /* + * Calculate target node size. x86_32 freaks on __udivdi3() so do + * the division in ulong number of pages and convert back. + */ + size = max_addr - addr - memblock_x86_hole_size(addr, max_addr); + size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes); + /* * Calculate the number of big nodes that can be allocated as a result * of consolidating the remainder. @@ -226,7 +233,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, */ while (nodes_weight(physnode_mask)) { for_each_node_mask(i, physnode_mask) { - u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT; + u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN); u64 start, limit, end; int phys_blk; @@ -298,7 +305,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) { static struct numa_meminfo ei __initdata; static struct numa_meminfo pi __initdata; - const u64 max_addr = max_pfn << PAGE_SHIFT; + const u64 max_addr = PFN_PHYS(max_pfn); u8 *phys_dist = NULL; size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); int max_emu_nid, dfl_phys_nid; @@ -342,8 +349,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) if (numa_dist_cnt) { u64 phys; - phys = memblock_find_in_range(0, - (u64)max_pfn_mapped << PAGE_SHIFT, + phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped), phys_size, PAGE_SIZE); if (phys == MEMBLOCK_ERROR) { pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); @@ -454,10 +460,9 @@ void __cpuinit numa_remove_cpu(int cpu) cpumask_clear_cpu(cpu, node_to_cpumask_map[i]); } #else /* !CONFIG_DEBUG_PER_CPU_MAPS */ -static void __cpuinit numa_set_cpumask(int cpu, int enable) +static void __cpuinit numa_set_cpumask(int cpu, bool enable) { - struct cpumask *mask; - int nid, physnid, i; + int nid, physnid; nid = early_cpu_to_node(cpu); if (nid == NUMA_NO_NODE) { @@ -467,28 +472,21 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable) physnid = emu_nid_to_phys[nid]; - for_each_online_node(i) { + for_each_online_node(nid) { if (emu_nid_to_phys[nid] != physnid) continue; - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); + debug_cpumask_set_cpu(cpu, nid, enable); } } void __cpuinit numa_add_cpu(int cpu) { - numa_set_cpumask(cpu, 1); + numa_set_cpumask(cpu, true); } void __cpuinit numa_remove_cpu(int cpu) { - numa_set_cpumask(cpu, 0); + numa_set_cpumask(cpu, false); } #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h index ef2d973..7178c3a 100644 --- a/arch/x86/mm/numa_internal.h +++ b/arch/x86/mm/numa_internal.h @@ -19,6 +19,14 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi); int __init numa_cleanup_meminfo(struct numa_meminfo *mi); void __init numa_reset_distance(void); +void __init x86_numa_init(void); + +#ifdef CONFIG_X86_64 +static inline void init_alloc_remap(int nid, u64 start, u64 end) { } +#else +void __init init_alloc_remap(int nid, u64 start, u64 end); +#endif + #ifdef CONFIG_NUMA_EMU void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat.c index 8e9d339..81dbfde 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat.c @@ -26,8 +26,6 @@ int acpi_numa __initdata; -static struct bootnode nodes_add[MAX_NUMNODES]; - static __init int setup_node(int pxm) { return acpi_map_pxm_to_node(pxm); @@ -37,7 +35,6 @@ static __init void bad_srat(void) { printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; - memset(nodes_add, 0, sizeof(nodes_add)); } static __init inline int srat_disabled(void) @@ -131,73 +128,17 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) pxm, apic_id, node); } -#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE +#ifdef CONFIG_MEMORY_HOTPLUG static inline int save_add_info(void) {return 1;} #else static inline int save_add_info(void) {return 0;} #endif -/* - * Update nodes_add[] - * This code supports one contiguous hot add area per node - */ -static void __init -update_nodes_add(int node, unsigned long start, unsigned long end) -{ - unsigned long s_pfn = start >> PAGE_SHIFT; - unsigned long e_pfn = end >> PAGE_SHIFT; - int changed = 0; - struct bootnode *nd = &nodes_add[node]; - - /* I had some trouble with strange memory hotadd regions breaking - the boot. Be very strict here and reject anything unexpected. - If you want working memory hotadd write correct SRATs. - - The node size check is a basic sanity check to guard against - mistakes */ - if ((signed long)(end - start) < NODE_MIN_SIZE) { - printk(KERN_ERR "SRAT: Hotplug area too small\n"); - return; - } - - /* This check might be a bit too strict, but I'm keeping it for now. */ - if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) { - printk(KERN_ERR - "SRAT: Hotplug area %lu -> %lu has existing memory\n", - s_pfn, e_pfn); - return; - } - - /* Looks good */ - - if (nd->start == nd->end) { - nd->start = start; - nd->end = end; - changed = 1; - } else { - if (nd->start == end) { - nd->start = start; - changed = 1; - } - if (nd->end == start) { - nd->end = end; - changed = 1; - } - if (!changed) - printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); - } - - if (changed) { - node_set(node, numa_nodes_parsed); - printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", - nd->start, nd->end); - } -} /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ void __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { - unsigned long start, end; + u64 start, end; int node, pxm; if (srat_disabled()) @@ -226,11 +167,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) return; } - printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm, + printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, start, end); - - if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) - update_nodes_add(node, start, end); } void __init acpi_numa_arch_fixup(void) {} @@ -244,17 +182,3 @@ int __init x86_acpi_numa_init(void) return ret; return srat_disabled() ? -EINVAL : 0; } - -#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) -int memory_add_physaddr_to_nid(u64 start) -{ - int i, ret = 0; - - for_each_node(i) - if (nodes_add[i].start <= start && nodes_add[i].end > start) - ret = i; - - return ret; -} -EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); -#endif diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c deleted file mode 100644 index 48651c6..0000000 --- a/arch/x86/mm/srat_32.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * Some of the code in this file has been gleaned from the 64 bit - * discontigmem support code base. - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to Pat Gaughen <gone@us.ibm.com> - */ -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/memblock.h> -#include <linux/mmzone.h> -#include <linux/acpi.h> -#include <linux/nodemask.h> -#include <asm/srat.h> -#include <asm/topology.h> -#include <asm/smp.h> -#include <asm/e820.h> - -/* - * proximity macros and definitions - */ -#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */ -#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */ -#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit)) -#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) -/* bitmap length; _PXM is at most 255 */ -#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) -static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ - -#define MAX_CHUNKS_PER_NODE 3 -#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) -struct node_memory_chunk_s { - unsigned long start_pfn; - unsigned long end_pfn; - u8 pxm; // proximity domain of node - u8 nid; // which cnode contains this chunk? - u8 bank; // which mem bank on this node -}; -static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; - -static int __initdata num_memory_chunks; /* total number of memory chunks */ -static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC]; - -int acpi_numa __initdata; - -static __init void bad_srat(void) -{ - printk(KERN_ERR "SRAT: SRAT not used.\n"); - acpi_numa = -1; - num_memory_chunks = 0; -} - -static __init inline int srat_disabled(void) -{ - return numa_off || acpi_numa < 0; -} - -/* Identify CPU proximity domains */ -void __init -acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity) -{ - if (srat_disabled()) - return; - if (cpu_affinity->header.length != - sizeof(struct acpi_srat_cpu_affinity)) { - bad_srat(); - return; - } - - if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) - return; /* empty entry */ - - /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); - - /* don't need to check apic_id here, because it is always 8 bits */ - apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; - - printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n", - cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); -} - -/* - * Identify memory proximity domains and hot-remove capabilities. - * Fill node memory chunk list structure. - */ -void __init -acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity) -{ - unsigned long long paddr, size; - unsigned long start_pfn, end_pfn; - u8 pxm; - struct node_memory_chunk_s *p, *q, *pend; - - if (srat_disabled()) - return; - if (memory_affinity->header.length != - sizeof(struct acpi_srat_mem_affinity)) { - bad_srat(); - return; - } - - if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; /* empty entry */ - - pxm = memory_affinity->proximity_domain & 0xff; - - /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, pxm); - - /* calculate info for memory chunk structure */ - paddr = memory_affinity->base_address; - size = memory_affinity->length; - - start_pfn = paddr >> PAGE_SHIFT; - end_pfn = (paddr + size) >> PAGE_SHIFT; - - - if (num_memory_chunks >= MAXCHUNKS) { - printk(KERN_WARNING "Too many mem chunks in SRAT." - " Ignoring %lld MBytes at %llx\n", - size/(1024*1024), paddr); - return; - } - - /* Insertion sort based on base address */ - pend = &node_memory_chunk[num_memory_chunks]; - for (p = &node_memory_chunk[0]; p < pend; p++) { - if (start_pfn < p->start_pfn) - break; - } - if (p < pend) { - for (q = pend; q >= p; q--) - *(q + 1) = *q; - } - p->start_pfn = start_pfn; - p->end_pfn = end_pfn; - p->pxm = pxm; - - num_memory_chunks++; - - printk(KERN_DEBUG "Memory range %08lx to %08lx" - " in proximity domain %02x %s\n", - start_pfn, end_pfn, - pxm, - ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? - "enabled and removable" : "enabled" ) ); -} - -/* Callback for SLIT parsing */ -void __init acpi_numa_slit_init(struct acpi_table_slit *slit) -{ -} - -void acpi_numa_arch_fixup(void) -{ -} -/* - * The SRAT table always lists ascending addresses, so can always - * assume that the first "start" address that you see is the real - * start of the node, and that the current "end" address is after - * the previous one. - */ -static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) -{ - /* - * Only add present memory as told by the e820. - * There is no guarantee from the SRAT that the memory it - * enumerates is present at boot time because it represents - * *possible* memory hotplug areas the same as normal RAM. - */ - if (memory_chunk->start_pfn >= max_pfn) { - printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n", - memory_chunk->start_pfn, memory_chunk->end_pfn); - return -1; - } - if (memory_chunk->nid != nid) - return -1; - - if (!node_has_online_mem(nid)) - node_start_pfn[nid] = memory_chunk->start_pfn; - - if (node_start_pfn[nid] > memory_chunk->start_pfn) - node_start_pfn[nid] = memory_chunk->start_pfn; - - if (node_end_pfn[nid] < memory_chunk->end_pfn) - node_end_pfn[nid] = memory_chunk->end_pfn; - - return 0; -} - -int __init get_memcfg_from_srat(void) -{ - int i, j, nid; - - - if (srat_disabled()) - goto out_fail; - - if (num_memory_chunks == 0) { - printk(KERN_DEBUG - "could not find any ACPI SRAT memory areas.\n"); - goto out_fail; - } - - /* Calculate total number of nodes in system from PXM bitmap and create - * a set of sequential node IDs starting at zero. (ACPI doesn't seem - * to specify the range of _PXM values.) - */ - /* - * MCD - we no longer HAVE to number nodes sequentially. PXM domain - * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically - * 32, so we will continue numbering them in this manner until MAX_NUMNODES - * approaches MAX_PXM_DOMAINS for i386. - */ - nodes_clear(node_online_map); - for (i = 0; i < MAX_PXM_DOMAINS; i++) { - if (BMAP_TEST(pxm_bitmap, i)) { - int nid = acpi_map_pxm_to_node(i); - node_set_online(nid); - } - } - BUG_ON(num_online_nodes() == 0); - - /* set cnode id in memory chunk structure */ - for (i = 0; i < num_memory_chunks; i++) - node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm); - - printk(KERN_DEBUG "pxm bitmap: "); - for (i = 0; i < sizeof(pxm_bitmap); i++) { - printk(KERN_CONT "%02x ", pxm_bitmap[i]); - } - printk(KERN_CONT "\n"); - printk(KERN_DEBUG "Number of logical nodes in system = %d\n", - num_online_nodes()); - printk(KERN_DEBUG "Number of memory chunks in system = %d\n", - num_memory_chunks); - - for (i = 0; i < MAX_LOCAL_APIC; i++) - set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i])); - - for (j = 0; j < num_memory_chunks; j++){ - struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; - printk(KERN_DEBUG - "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", - j, chunk->nid, chunk->start_pfn, chunk->end_pfn); - if (node_read_chunk(chunk->nid, chunk)) - continue; - - memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn, - min(chunk->end_pfn, max_pfn)); - } - /* for out of order entries in SRAT */ - sort_node_map(); - - for_each_online_node(nid) { - unsigned long start = node_start_pfn[nid]; - unsigned long end = min(node_end_pfn[nid], max_pfn); - - memory_present(nid, start, end); - node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); - } - return 1; -out_fail: - printk(KERN_DEBUG "failed to get NUMA memory information from SRAT" - " table\n"); - return 0; -} diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index 2d49d4e..a5b64ab 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -16,17 +16,6 @@ #include <asm/stacktrace.h> #include <linux/compat.h> -static void backtrace_warning_symbol(void *data, char *msg, - unsigned long symbol) -{ - /* Ignore warnings */ -} - -static void backtrace_warning(void *data, char *msg) -{ - /* Ignore warnings */ -} - static int backtrace_stack(void *data, char *name) { /* Yes, we want all stacks */ @@ -42,8 +31,6 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) } static struct stacktrace_ops backtrace_ops = { - .warning = backtrace_warning, - .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, .walk_stack = print_context_stack, diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index e37b407..8214724 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -108,7 +108,8 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) } irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0, (type == PCI_CAP_ID_MSIX) ? - "msi-x" : "msi"); + "msi-x" : "msi", + DOMID_SELF); if (irq < 0) goto error; dev_dbg(&dev->dev, @@ -148,7 +149,8 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, (type == PCI_CAP_ID_MSIX) ? "pcifront-msi-x" : - "pcifront-msi"); + "pcifront-msi", + DOMID_SELF); if (irq < 0) goto free; i++; @@ -190,9 +192,16 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) list_for_each_entry(msidesc, &dev->msi_list, list) { struct physdev_map_pirq map_irq; + domid_t domid; + + domid = ret = xen_find_device_domain_owner(dev); + /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED, + * hence check ret value for < 0. */ + if (ret < 0) + domid = DOMID_SELF; memset(&map_irq, 0, sizeof(map_irq)); - map_irq.domid = DOMID_SELF; + map_irq.domid = domid; map_irq.type = MAP_PIRQ_TYPE_MSI; map_irq.index = -1; map_irq.pirq = -1; @@ -215,14 +224,16 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); if (ret) { - dev_warn(&dev->dev, "xen map irq failed %d\n", ret); + dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n", + ret, domid); goto out; } ret = xen_bind_pirq_msi_to_irq(dev, msidesc, map_irq.pirq, map_irq.index, (type == PCI_CAP_ID_MSIX) ? - "msi-x" : "msi"); + "msi-x" : "msi", + domid); if (ret < 0) goto out; } @@ -461,3 +472,78 @@ void __init xen_setup_pirqs(void) } } #endif + +#ifdef CONFIG_XEN_DOM0 +struct xen_device_domain_owner { + domid_t domain; + struct pci_dev *dev; + struct list_head list; +}; + +static DEFINE_SPINLOCK(dev_domain_list_spinlock); +static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list); + +static struct xen_device_domain_owner *find_device(struct pci_dev *dev) +{ + struct xen_device_domain_owner *owner; + + list_for_each_entry(owner, &dev_domain_list, list) { + if (owner->dev == dev) + return owner; + } + return NULL; +} + +int xen_find_device_domain_owner(struct pci_dev *dev) +{ + struct xen_device_domain_owner *owner; + int domain = -ENODEV; + + spin_lock(&dev_domain_list_spinlock); + owner = find_device(dev); + if (owner) + domain = owner->domain; + spin_unlock(&dev_domain_list_spinlock); + return domain; +} +EXPORT_SYMBOL_GPL(xen_find_device_domain_owner); + +int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain) +{ + struct xen_device_domain_owner *owner; + + owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL); + if (!owner) + return -ENODEV; + + spin_lock(&dev_domain_list_spinlock); + if (find_device(dev)) { + spin_unlock(&dev_domain_list_spinlock); + kfree(owner); + return -EEXIST; + } + owner->domain = domain; + owner->dev = dev; + list_add_tail(&owner->list, &dev_domain_list); + spin_unlock(&dev_domain_list_spinlock); + return 0; +} +EXPORT_SYMBOL_GPL(xen_register_device_domain_owner); + +int xen_unregister_device_domain_owner(struct pci_dev *dev) +{ + struct xen_device_domain_owner *owner; + + spin_lock(&dev_domain_list_spinlock); + owner = find_device(dev); + if (!owner) { + spin_unlock(&dev_domain_list_spinlock); + return -ENODEV; + } + list_del(&owner->list); + spin_unlock(&dev_domain_list_spinlock); + kfree(owner); + return 0; +} +EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner); +#endif diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts index dc701ea..e70be38 100644 --- a/arch/x86/platform/ce4100/falconfalls.dts +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -74,6 +74,7 @@ compatible = "intel,ce4100-pci", "pci"; device_type = "pci"; bus-range = <1 1>; + reg = <0x0800 0x0 0x0 0x0 0x0>; ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; interrupt-parent = <&ioapic2>; @@ -346,7 +347,7 @@ "pciclass0c03"; reg = <0x16800 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; usb@d,1 { @@ -356,7 +357,7 @@ "pciclass0c03"; reg = <0x16900 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; sata@e,0 { @@ -366,7 +367,7 @@ "pciclass0106"; reg = <0x17000 0x0 0x0 0x0 0x0>; - interrupts = <23 3>; + interrupts = <23 1>; }; flash@f,0 { @@ -412,6 +413,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "isa"; + reg = <0xf800 0x0 0x0 0x0 0x0>; ranges = <1 0 0 0 0 0x100>; rtc@70 { diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 0fe27d7..b30aa26 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -145,17 +145,6 @@ static void virt_efi_reset_system(int reset_type, data_size, data); } -static efi_status_t virt_efi_set_virtual_address_map( - unsigned long memory_map_size, - unsigned long descriptor_size, - u32 descriptor_version, - efi_memory_desc_t *virtual_map) -{ - return efi_call_virt4(set_virtual_address_map, - memory_map_size, descriptor_size, - descriptor_version, virtual_map); -} - static efi_status_t __init phys_efi_set_virtual_address_map( unsigned long memory_map_size, unsigned long descriptor_size, @@ -468,11 +457,25 @@ void __init efi_init(void) #endif } +void __init efi_set_executable(efi_memory_desc_t *md, bool executable) +{ + u64 addr, npages; + + addr = md->virt_addr; + npages = md->num_pages; + + memrange_efi_to_native(&addr, &npages); + + if (executable) + set_memory_x(addr, npages); + else + set_memory_nx(addr, npages); +} + static void __init runtime_code_page_mkexec(void) { efi_memory_desc_t *md; void *p; - u64 addr, npages; /* Make EFI runtime service code area executable */ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { @@ -481,10 +484,7 @@ static void __init runtime_code_page_mkexec(void) if (md->type != EFI_RUNTIME_SERVICES_CODE) continue; - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_x(addr, npages); + efi_set_executable(md, true); } } @@ -498,13 +498,42 @@ static void __init runtime_code_page_mkexec(void) */ void __init efi_enter_virtual_mode(void) { - efi_memory_desc_t *md; + efi_memory_desc_t *md, *prev_md = NULL; efi_status_t status; unsigned long size; u64 end, systab, addr, npages, end_pfn; - void *p, *va; + void *p, *va, *new_memmap = NULL; + int count = 0; efi.systab = NULL; + + /* Merge contiguous regions of the same type and attribute */ + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + u64 prev_size; + md = p; + + if (!prev_md) { + prev_md = md; + continue; + } + + if (prev_md->type != md->type || + prev_md->attribute != md->attribute) { + prev_md = md; + continue; + } + + prev_size = prev_md->num_pages << EFI_PAGE_SHIFT; + + if (md->phys_addr == (prev_md->phys_addr + prev_size)) { + prev_md->num_pages += md->num_pages; + md->type = EFI_RESERVED_TYPE; + md->attribute = 0; + continue; + } + prev_md = md; + } + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { md = p; if (!(md->attribute & EFI_MEMORY_RUNTIME)) @@ -541,15 +570,21 @@ void __init efi_enter_virtual_mode(void) systab += md->virt_addr - md->phys_addr; efi.systab = (efi_system_table_t *) (unsigned long) systab; } + new_memmap = krealloc(new_memmap, + (count + 1) * memmap.desc_size, + GFP_KERNEL); + memcpy(new_memmap + (count * memmap.desc_size), md, + memmap.desc_size); + count++; } BUG_ON(!efi.systab); status = phys_efi_set_virtual_address_map( - memmap.desc_size * memmap.nr_map, + memmap.desc_size * count, memmap.desc_size, memmap.desc_version, - memmap.phys_map); + (efi_memory_desc_t *)__pa(new_memmap)); if (status != EFI_SUCCESS) { printk(KERN_ALERT "Unable to switch EFI into virtual mode " @@ -572,11 +607,12 @@ void __init efi_enter_virtual_mode(void) efi.set_variable = virt_efi_set_variable; efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count; efi.reset_system = virt_efi_reset_system; - efi.set_virtual_address_map = virt_efi_set_virtual_address_map; + efi.set_virtual_address_map = NULL; if (__supported_pte_mask & _PAGE_NX) runtime_code_page_mkexec(); early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size); memmap.map = NULL; + kfree(new_memmap); } /* diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac0621a..2649426 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -41,22 +41,7 @@ static pgd_t save_pgd __initdata; static unsigned long efi_flags __initdata; -static void __init early_mapping_set_exec(unsigned long start, - unsigned long end, - int executable) -{ - unsigned long num_pages; - - start &= PMD_MASK; - end = (end + PMD_SIZE - 1) & PMD_MASK; - num_pages = (end - start) >> PAGE_SHIFT; - if (executable) - set_memory_x((unsigned long)__va(start), num_pages); - else - set_memory_nx((unsigned long)__va(start), num_pages); -} - -static void __init early_runtime_code_mapping_set_exec(int executable) +static void __init early_code_mapping_set_exec(int executable) { efi_memory_desc_t *md; void *p; @@ -67,11 +52,8 @@ static void __init early_runtime_code_mapping_set_exec(int executable) /* Make EFI runtime service code area executable */ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { md = p; - if (md->type == EFI_RUNTIME_SERVICES_CODE) { - unsigned long end; - end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); - early_mapping_set_exec(md->phys_addr, end, executable); - } + if (md->type == EFI_RUNTIME_SERVICES_CODE) + efi_set_executable(md, executable); } } @@ -79,7 +61,7 @@ void __init efi_call_phys_prelog(void) { unsigned long vaddress; - early_runtime_code_mapping_set_exec(1); + early_code_mapping_set_exec(1); local_irq_save(efi_flags); vaddress = (unsigned long)__va(0x0UL); save_pgd = *pgd_offset_k(0x0UL); @@ -95,7 +77,7 @@ void __init efi_call_phys_epilog(void) set_pgd(pgd_offset_k(0x0UL), save_pgd); __flush_tlb_all(); local_irq_restore(efi_flags); - early_runtime_code_mapping_set_exec(0); + early_code_mapping_set_exec(0); } void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, @@ -107,8 +89,10 @@ void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, return ioremap(phys_addr, size); last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); - if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) - return NULL; + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { + unsigned long top = last_map_pfn << PAGE_SHIFT; + efi_ioremap(top, size - (top - phys_addr), type); + } return (void __iomem *)__va(phys_addr); } diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 5c0207b..7000e74 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -97,11 +97,11 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) pentry->freq_hz, pentry->irq); if (!pentry->irq) continue; - mp_irq.type = MP_IOAPIC; + mp_irq.type = MP_INTSRC; mp_irq.irqtype = mp_INT; /* triggering mode edge bit 2-3, active high polarity bit 0-1 */ mp_irq.irqflag = 5; - mp_irq.srcbus = 0; + mp_irq.srcbus = MP_BUS_ISA; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; @@ -168,10 +168,10 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->irq); - mp_irq.type = MP_IOAPIC; + mp_irq.type = MP_INTSRC; mp_irq.irqtype = mp_INT; mp_irq.irqflag = 0xf; /* level trigger and active low */ - mp_irq.srcbus = 0; + mp_irq.srcbus = MP_BUS_ISA; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; mp_irq.dstirq = pentry->irq; @@ -194,7 +194,7 @@ static unsigned long __init mrst_calibrate_tsc(void) return 0; } -void __init mrst_time_init(void) +static void __init mrst_time_init(void) { sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); switch (mrst_timer_options) { @@ -216,7 +216,7 @@ void __init mrst_time_init(void) apbt_time_init(); } -void __cpuinit mrst_arch_setup(void) +static void __cpuinit mrst_arch_setup(void) { if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; @@ -282,7 +282,7 @@ void __init x86_mrst_early_setup(void) /* Avoid searching for BIOS MP tables */ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; - + set_bit(MP_BUS_ISA, mp_bus_not_pci); } /* diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 04cf645..73d70d6 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -100,9 +100,11 @@ int vrtc_set_mmss(unsigned long nowtime) void __init mrst_rtc_init(void) { - unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr; + unsigned long vrtc_paddr; sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); + + vrtc_paddr = sfi_mrtc_array[0].phys_addr; if (!sfi_mrtc_num || !vrtc_paddr) return; diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index c2a8cab..81c5e21 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,2 @@ -obj-$(CONFIG_OLPC) += olpc.o +obj-$(CONFIG_OLPC) += olpc.o olpc_ofw.o olpc_dt.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o -obj-$(CONFIG_OLPC) += olpc_ofw.o -obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index edaf3fe..0060fd5 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <linux/string.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/geode.h> #include <asm/setup.h> @@ -187,41 +188,43 @@ err: } EXPORT_SYMBOL_GPL(olpc_ec_cmd); -static bool __init check_ofw_architecture(void) +static bool __init check_ofw_architecture(struct device_node *root) { - size_t propsize; - char olpc_arch[5]; - const void *args[] = { NULL, "architecture", olpc_arch, (void *)5 }; - void *res[] = { &propsize }; + const char *olpc_arch; + int propsize; - if (olpc_ofw("getprop", args, res)) { - printk(KERN_ERR "ofw: getprop call failed!\n"); - return false; - } + olpc_arch = of_get_property(root, "architecture", &propsize); return propsize == 5 && strncmp("OLPC", olpc_arch, 5) == 0; } -static u32 __init get_board_revision(void) +static u32 __init get_board_revision(struct device_node *root) { - size_t propsize; - __be32 rev; - const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 }; - void *res[] = { &propsize }; - - if (olpc_ofw("getprop", args, res) || propsize != 4) { - printk(KERN_ERR "ofw: getprop call failed!\n"); - return cpu_to_be32(0); - } - return be32_to_cpu(rev); + int propsize; + const __be32 *rev; + + rev = of_get_property(root, "board-revision-int", &propsize); + if (propsize != 4) + return 0; + + return be32_to_cpu(*rev); } static bool __init platform_detect(void) { - if (!check_ofw_architecture()) + struct device_node *root = of_find_node_by_path("/"); + bool success; + + if (!root) return false; - olpc_platform_info.flags |= OLPC_F_PRESENT; - olpc_platform_info.boardrev = get_board_revision(); - return true; + + success = check_ofw_architecture(root); + if (success) { + olpc_platform_info.boardrev = get_board_revision(root); + olpc_platform_info.flags |= OLPC_F_PRESENT; + } + + of_node_put(root); + return success; } static int __init add_xo1_platform_devices(void) diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c index 044bda5..d39f63d 100644 --- a/arch/x86/platform/olpc/olpc_dt.c +++ b/arch/x86/platform/olpc/olpc_dt.c @@ -19,7 +19,9 @@ #include <linux/kernel.h> #include <linux/bootmem.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/of_pdt.h> +#include <asm/olpc.h> #include <asm/olpc_ofw.h> static phandle __init olpc_dt_getsibling(phandle node) @@ -180,3 +182,20 @@ void __init olpc_dt_build_devicetree(void) pr_info("PROM DT: Built device tree with %u bytes of memory.\n", prom_early_allocated); } + +/* A list of DT node/bus matches that we want to expose as platform devices */ +static struct of_device_id __initdata of_ids[] = { + { .compatible = "olpc,xo1-battery" }, + { .compatible = "olpc,xo1-dcon" }, + { .compatible = "olpc,xo1-rtc" }, + {}, +}; + +static int __init olpc_create_platform_devices(void) +{ + if (machine_is_olpc()) + return of_platform_bus_probe(NULL, of_ids, NULL); + else + return 0; +} +device_initcall(olpc_create_platform_devices); diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 7cb6424..c58e0ea 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -699,16 +699,17 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, unsigned long va, unsigned int cpu) { - int tcpu; - int uvhub; int locals = 0; int remotes = 0; int hubs = 0; + int tcpu; + int tpnode; struct bau_desc *bau_desc; struct cpumask *flush_mask; struct ptc_stats *stat; struct bau_control *bcp; struct bau_control *tbcp; + struct hub_and_pnode *hpp; /* kernel was booted 'nobau' */ if (nobau) @@ -750,11 +751,18 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu; bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); - /* cpu statistics */ for_each_cpu(tcpu, flush_mask) { - uvhub = uv_cpu_to_blade_id(tcpu); - bau_uvhub_set(uvhub, &bau_desc->distribution); - if (uvhub == bcp->uvhub) + /* + * The distribution vector is a bit map of pnodes, relative + * to the partition base pnode (and the partition base nasid + * in the header). + * Translate cpu to pnode and hub using an array stored + * in local memory. + */ + hpp = &bcp->socket_master->target_hub_and_pnode[tcpu]; + tpnode = hpp->pnode - bcp->partition_base_pnode; + bau_uvhub_set(tpnode, &bau_desc->distribution); + if (hpp->uvhub == bcp->uvhub) locals++; else remotes++; @@ -855,7 +863,7 @@ void uv_bau_message_interrupt(struct pt_regs *regs) * an interrupt, but causes an error message to be returned to * the sender. */ -static void uv_enable_timeouts(void) +static void __init uv_enable_timeouts(void) { int uvhub; int nuvhubs; @@ -1326,10 +1334,10 @@ static int __init uv_ptc_init(void) } /* - * initialize the sending side's sending buffers + * Initialize the sending side's sending buffers. */ static void -uv_activation_descriptor_init(int node, int pnode) +uv_activation_descriptor_init(int node, int pnode, int base_pnode) { int i; int cpu; @@ -1352,11 +1360,11 @@ uv_activation_descriptor_init(int node, int pnode) n = pa >> uv_nshift; m = pa & uv_mmask; + /* the 14-bit pnode */ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, (n << UV_DESC_BASE_PNODE_SHIFT | m)); - /* - * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each + * Initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each * cpu even though we only use the first one; one descriptor can * describe a broadcast to 256 uv hubs. */ @@ -1365,12 +1373,13 @@ uv_activation_descriptor_init(int node, int pnode) memset(bd2, 0, sizeof(struct bau_desc)); bd2->header.sw_ack_flag = 1; /* - * base_dest_nodeid is the nasid of the first uvhub - * in the partition. The bit map will indicate uvhub numbers, - * which are 0-N in a partition. Pnodes are unique system-wide. + * The base_dest_nasid set in the message header is the nasid + * of the first uvhub in the partition. The bit map will + * indicate destination pnode numbers relative to that base. + * They may not be consecutive if nasid striding is being used. */ - bd2->header.base_dest_nodeid = UV_PNODE_TO_NASID(uv_partition_base_pnode); - bd2->header.dest_subnodeid = 0x10; /* the LB */ + bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode); + bd2->header.dest_subnodeid = UV_LB_SUBNODEID; bd2->header.command = UV_NET_ENDPOINT_INTD; bd2->header.int_both = 1; /* @@ -1442,7 +1451,7 @@ uv_payload_queue_init(int node, int pnode) /* * Initialization of each UV hub's structures */ -static void __init uv_init_uvhub(int uvhub, int vector) +static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode) { int node; int pnode; @@ -1450,11 +1459,11 @@ static void __init uv_init_uvhub(int uvhub, int vector) node = uvhub_to_first_node(uvhub); pnode = uv_blade_to_pnode(uvhub); - uv_activation_descriptor_init(node, pnode); + uv_activation_descriptor_init(node, pnode, base_pnode); uv_payload_queue_init(node, pnode); /* - * the below initialization can't be in firmware because the - * messaging IRQ will be determined by the OS + * The below initialization can't be in firmware because the + * messaging IRQ will be determined by the OS. */ apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits; uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -1491,10 +1500,11 @@ calculate_destination_timeout(void) /* * initialize the bau_control structure for each cpu */ -static int __init uv_init_per_cpu(int nuvhubs) +static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode) { int i; int cpu; + int tcpu; int pnode; int uvhub; int have_hmaster; @@ -1528,6 +1538,15 @@ static int __init uv_init_per_cpu(int nuvhubs) bcp = &per_cpu(bau_control, cpu); memset(bcp, 0, sizeof(struct bau_control)); pnode = uv_cpu_hub_info(cpu)->pnode; + if ((pnode - base_part_pnode) >= UV_DISTRIBUTION_SIZE) { + printk(KERN_EMERG + "cpu %d pnode %d-%d beyond %d; BAU disabled\n", + cpu, pnode, base_part_pnode, + UV_DISTRIBUTION_SIZE); + return 1; + } + bcp->osnode = cpu_to_node(cpu); + bcp->partition_base_pnode = uv_partition_base_pnode; uvhub = uv_cpu_hub_info(cpu)->numa_blade_id; *(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8)); bdp = &uvhub_descs[uvhub]; @@ -1536,7 +1555,7 @@ static int __init uv_init_per_cpu(int nuvhubs) bdp->pnode = pnode; /* kludge: 'assuming' one node per socket, and assuming that disabling a socket just leaves a gap in node numbers */ - socket = (cpu_to_node(cpu) & 1); + socket = bcp->osnode & 1; bdp->socket_mask |= (1 << socket); sdp = &bdp->socket[socket]; sdp->cpu_number[sdp->num_cpus] = cpu; @@ -1585,6 +1604,20 @@ static int __init uv_init_per_cpu(int nuvhubs) nextsocket: socket++; socket_mask = (socket_mask >> 1); + /* each socket gets a local array of pnodes/hubs */ + bcp = smaster; + bcp->target_hub_and_pnode = kmalloc_node( + sizeof(struct hub_and_pnode) * + num_possible_cpus(), GFP_KERNEL, bcp->osnode); + memset(bcp->target_hub_and_pnode, 0, + sizeof(struct hub_and_pnode) * + num_possible_cpus()); + for_each_present_cpu(tcpu) { + bcp->target_hub_and_pnode[tcpu].pnode = + uv_cpu_hub_info(tcpu)->pnode; + bcp->target_hub_and_pnode[tcpu].uvhub = + uv_cpu_hub_info(tcpu)->numa_blade_id; + } } } kfree(uvhub_descs); @@ -1637,21 +1670,22 @@ static int __init uv_bau_init(void) spin_lock_init(&disable_lock); congested_cycles = microsec_2_cycles(congested_response_us); - if (uv_init_per_cpu(nuvhubs)) { - nobau = 1; - return 0; - } - uv_partition_base_pnode = 0x7fffffff; - for (uvhub = 0; uvhub < nuvhubs; uvhub++) + for (uvhub = 0; uvhub < nuvhubs; uvhub++) { if (uv_blade_nr_possible_cpus(uvhub) && (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode)) uv_partition_base_pnode = uv_blade_to_pnode(uvhub); + } + + if (uv_init_per_cpu(nuvhubs, uv_partition_base_pnode)) { + nobau = 1; + return 0; + } vector = UV_BAU_MESSAGE; for_each_possible_blade(uvhub) if (uv_blade_nr_possible_cpus(uvhub)) - uv_init_uvhub(uvhub, vector); + uv_init_uvhub(uvhub, vector, uv_partition_base_pnode); uv_enable_timeouts(); alloc_intr_gate(vector, uv_bau_message_intr1); diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c index 9daf5d1..0eb9018 100644 --- a/arch/x86/platform/uv/uv_time.c +++ b/arch/x86/platform/uv/uv_time.c @@ -40,7 +40,6 @@ static struct clocksource clocksource_uv = { .rating = 400, .read = uv_read_rtc, .mask = (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK, - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -372,14 +371,11 @@ static __init int uv_rtc_setup_clock(void) if (!is_uv_system()) return -ENODEV; - clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second, - clocksource_uv.shift); - /* If single blade, prefer tsc */ if (uv_num_possible_blades() == 1) clocksource_uv.rating = 250; - rc = clocksource_register(&clocksource_uv); + rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second); if (rc) printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc); else diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c index fe4cf82..c7abf13 100644 --- a/arch/x86/platform/visws/visws_quirks.c +++ b/arch/x86/platform/visws/visws_quirks.c @@ -471,15 +471,7 @@ static unsigned int startup_piix4_master_irq(struct irq_data *data) { legacy_pic->init(0); enable_cobalt_irq(data); -} - -static void end_piix4_master_irq(struct irq_data *data) -{ - unsigned long flags; - - spin_lock_irqsave(&cobalt_lock, flags); - enable_cobalt_irq(data); - spin_unlock_irqrestore(&cobalt_lock, flags); + return 0; } static struct irq_chip piix4_master_irq_type = { @@ -492,7 +484,7 @@ static void pii4_mask(struct irq_data *data) { } static struct irq_chip piix4_virtual_irq_type = { .name = "PIIX4-virtual", - .mask = pii4_mask, + .irq_mask = pii4_mask, }; /* @@ -580,9 +572,9 @@ static struct irqaction cascade_action = { static inline void set_piix4_virtual_irq_type(void) { - piix4_virtual_irq_type.enable = i8259A_chip.unmask; - piix4_virtual_irq_type.disable = i8259A_chip.mask; - piix4_virtual_irq_type.unmask = i8259A_chip.unmask; + piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask; + piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask; + piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask; } static void __init visws_pre_intr_init(void) @@ -599,7 +591,7 @@ static void __init visws_pre_intr_init(void) else if (i == CO_IRQ_IDE0) chip = &cobalt_irq_type; else if (i == CO_IRQ_IDE1) - >chip = &cobalt_irq_type; + chip = &cobalt_irq_type; else if (i == CO_IRQ_8259) chip = &piix4_master_irq_type; else if (i < CO_IRQ_APIC0) diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 1c7121b..5cc821c 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -39,6 +39,7 @@ config XEN_MAX_DOMAIN_MEMORY config XEN_SAVE_RESTORE bool depends on XEN + select HIBERNATE_CALLBACKS default y config XEN_DEBUG_FS diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 49dbd78..dd7b88f 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -235,9 +235,10 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, *dx &= maskedx; } -static __init void xen_init_cpuid_mask(void) +static void __init xen_init_cpuid_mask(void) { unsigned int ax, bx, cx, dx; + unsigned int xsave_mask; cpuid_leaf1_edx_mask = ~((1 << X86_FEATURE_MCE) | /* disable MCE */ @@ -249,24 +250,16 @@ static __init void xen_init_cpuid_mask(void) cpuid_leaf1_edx_mask &= ~((1 << X86_FEATURE_APIC) | /* disable local APIC */ (1 << X86_FEATURE_ACPI)); /* disable ACPI */ - ax = 1; - cx = 0; xen_cpuid(&ax, &bx, &cx, &dx); - /* cpuid claims we support xsave; try enabling it to see what happens */ - if (cx & (1 << (X86_FEATURE_XSAVE % 32))) { - unsigned long cr4; - - set_in_cr4(X86_CR4_OSXSAVE); - - cr4 = read_cr4(); + xsave_mask = + (1 << (X86_FEATURE_XSAVE % 32)) | + (1 << (X86_FEATURE_OSXSAVE % 32)); - if ((cr4 & X86_CR4_OSXSAVE) == 0) - cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32)); - - clear_in_cr4(X86_CR4_OSXSAVE); - } + /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ + if ((cx & xsave_mask) != xsave_mask) + cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ } static void xen_set_debugreg(int reg, unsigned long val) @@ -407,7 +400,7 @@ static void xen_load_gdt(const struct desc_ptr *dtr) /* * load_gdt for early boot, when the gdt is only mapped once */ -static __init void xen_load_gdt_boot(const struct desc_ptr *dtr) +static void __init xen_load_gdt_boot(const struct desc_ptr *dtr) { unsigned long va = dtr->address; unsigned int size = dtr->size + 1; @@ -669,7 +662,7 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry, * Version of write_gdt_entry for use at early boot-time needed to * update an entry as simply as possible. */ -static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry, +static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry, const void *desc, int type) { switch (type) { @@ -940,18 +933,18 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf, return ret; } -static const struct pv_info xen_info __initdata = { +static const struct pv_info xen_info __initconst = { .paravirt_enabled = 1, .shared_kernel_pmd = 0, .name = "Xen", }; -static const struct pv_init_ops xen_init_ops __initdata = { +static const struct pv_init_ops xen_init_ops __initconst = { .patch = xen_patch, }; -static const struct pv_cpu_ops xen_cpu_ops __initdata = { +static const struct pv_cpu_ops xen_cpu_ops __initconst = { .cpuid = xen_cpuid, .set_debugreg = xen_set_debugreg, @@ -1011,7 +1004,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .end_context_switch = xen_end_context_switch, }; -static const struct pv_apic_ops xen_apic_ops __initdata = { +static const struct pv_apic_ops xen_apic_ops __initconst = { #ifdef CONFIG_X86_LOCAL_APIC .startup_ipi_hook = paravirt_nop, #endif @@ -1062,7 +1055,7 @@ int xen_panic_handler_init(void) return 0; } -static const struct machine_ops __initdata xen_machine_ops = { +static const struct machine_ops xen_machine_ops __initconst = { .restart = xen_restart, .halt = xen_machine_halt, .power_off = xen_machine_halt, @@ -1339,7 +1332,7 @@ static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata xen_hvm_cpu_notifier = { +static struct notifier_block xen_hvm_cpu_notifier __cpuinitdata = { .notifier_call = xen_hvm_cpu_notify, }; @@ -1388,7 +1381,7 @@ bool xen_hvm_need_lapic(void) } EXPORT_SYMBOL_GPL(xen_hvm_need_lapic); -const __refconst struct hypervisor_x86 x86_hyper_xen_hvm = { +const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = { .name = "Xen HVM", .detect = xen_hvm_platform, .init_platform = xen_hvm_guest_init, diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c index 6a6fe89..8bbb465 100644 --- a/arch/x86/xen/irq.c +++ b/arch/x86/xen/irq.c @@ -113,7 +113,7 @@ static void xen_halt(void) xen_safe_halt(); } -static const struct pv_irq_ops xen_irq_ops __initdata = { +static const struct pv_irq_ops xen_irq_ops __initconst = { .save_fl = PV_CALLEE_SAVE(xen_save_fl), .restore_fl = PV_CALLEE_SAVE(xen_restore_fl), .irq_disable = PV_CALLEE_SAVE(xen_irq_disable), diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c82df6c..02d7524 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -565,13 +565,13 @@ pte_t xen_make_pte_debug(pteval_t pte) if (io_page && (xen_initial_domain() || addr >= ISA_END_ADDRESS)) { other_addr = pfn_to_mfn(addr >> PAGE_SHIFT) << PAGE_SHIFT; - WARN(addr != other_addr, + WARN_ONCE(addr != other_addr, "0x%lx is using VM_IO, but it is 0x%lx!\n", (unsigned long)addr, (unsigned long)other_addr); } else { pteval_t iomap_set = (_pte.pte & PTE_FLAGS_MASK) & _PAGE_IOMAP; other_addr = (_pte.pte & PTE_PFN_MASK); - WARN((addr == other_addr) && (!io_page) && (!iomap_set), + WARN_ONCE((addr == other_addr) && (!io_page) && (!iomap_set), "0x%lx is missing VM_IO (and wasn't fixed)!\n", (unsigned long)addr); } @@ -1054,7 +1054,7 @@ void xen_mm_pin_all(void) * that's before we have page structures to store the bits. So do all * the book-keeping now. */ -static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page, +static int __init xen_mark_pinned(struct mm_struct *mm, struct page *page, enum pt_level level) { SetPagePinned(page); @@ -1187,7 +1187,7 @@ static void drop_other_mm_ref(void *info) active_mm = percpu_read(cpu_tlbstate.active_mm); - if (active_mm == mm) + if (active_mm == mm && percpu_read(cpu_tlbstate.state) != TLBSTATE_OK) leave_mm(smp_processor_id()); /* If this cpu still has a stale cr3 reference, then make sure @@ -1271,13 +1271,27 @@ void xen_exit_mmap(struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } -static __init void xen_pagetable_setup_start(pgd_t *base) +static void __init xen_pagetable_setup_start(pgd_t *base) { } +static __init void xen_mapping_pagetable_reserve(u64 start, u64 end) +{ + /* reserve the range used */ + native_pagetable_reserve(start, end); + + /* set as RW the rest */ + printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n", end, + PFN_PHYS(pgt_buf_top)); + while (end < PFN_PHYS(pgt_buf_top)) { + make_lowmem_page_readwrite(__va(end)); + end += PAGE_SIZE; + } +} + static void xen_post_allocator_init(void); -static __init void xen_pagetable_setup_done(pgd_t *base) +static void __init xen_pagetable_setup_done(pgd_t *base) { xen_setup_shared_info(); xen_post_allocator_init(); @@ -1473,16 +1487,20 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd) #endif } -static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) -{ - unsigned long pfn = pte_pfn(pte); - #ifdef CONFIG_X86_32 +static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte) +{ /* If there's an existing pte, then don't allow _PAGE_RW to be set */ if (pte_val_ma(*ptep) & _PAGE_PRESENT) pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) & pte_val_ma(pte)); -#endif + + return pte; +} +#else /* CONFIG_X86_64 */ +static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); /* * If the new pfn is within the range of the newly allocated @@ -1491,16 +1509,17 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) * it is RO. */ if (((!is_early_ioremap_ptep(ptep) && - pfn >= pgt_buf_start && pfn < pgt_buf_end)) || + pfn >= pgt_buf_start && pfn < pgt_buf_top)) || (is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1))) pte = pte_wrprotect(pte); return pte; } +#endif /* CONFIG_X86_64 */ /* Init-time set_pte while constructing initial pagetables, which doesn't allow RO pagetable pages to be remapped RW */ -static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) +static void __init xen_set_pte_init(pte_t *ptep, pte_t pte) { pte = mask_rw_pte(ptep, pte); @@ -1518,7 +1537,7 @@ static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) /* Early in boot, while setting up the initial pagetable, assume everything is pinned. */ -static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) +static void __init xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) { #ifdef CONFIG_FLATMEM BUG_ON(mem_map); /* should only be used early */ @@ -1528,7 +1547,7 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn) } /* Used for pmd and pud */ -static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn) +static void __init xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn) { #ifdef CONFIG_FLATMEM BUG_ON(mem_map); /* should only be used early */ @@ -1538,13 +1557,13 @@ static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn) /* Early release_pte assumes that all pts are pinned, since there's only init_mm and anything attached to that is pinned. */ -static __init void xen_release_pte_init(unsigned long pfn) +static void __init xen_release_pte_init(unsigned long pfn) { pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } -static __init void xen_release_pmd_init(unsigned long pfn) +static void __init xen_release_pmd_init(unsigned long pfn) { make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } @@ -1670,7 +1689,7 @@ static void set_page_prot(void *addr, pgprot_t prot) BUG(); } -static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) +static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) { unsigned pmdidx, pteidx; unsigned ident_pte; @@ -1753,7 +1772,7 @@ static void convert_pfn_mfn(void *v) * of the physical mapping once some sort of allocator has been set * up. */ -__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, +pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) { pud_t *l3; @@ -1824,7 +1843,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD); static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD); -static __init void xen_write_cr3_init(unsigned long cr3) +static void __init xen_write_cr3_init(unsigned long cr3) { unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir)); @@ -1861,7 +1880,7 @@ static __init void xen_write_cr3_init(unsigned long cr3) pv_mmu_ops.write_cr3 = &xen_write_cr3; } -__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, +pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) { pmd_t *kernel_pmd; @@ -1967,7 +1986,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) #endif } -__init void xen_ident_map_ISA(void) +void __init xen_ident_map_ISA(void) { unsigned long pa; @@ -1990,7 +2009,7 @@ __init void xen_ident_map_ISA(void) xen_flush_tlb(); } -static __init void xen_post_allocator_init(void) +static void __init xen_post_allocator_init(void) { #ifdef CONFIG_XEN_DEBUG pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug); @@ -2027,7 +2046,7 @@ static void xen_leave_lazy_mmu(void) preempt_enable(); } -static const struct pv_mmu_ops xen_mmu_ops __initdata = { +static const struct pv_mmu_ops xen_mmu_ops __initconst = { .read_cr2 = xen_read_cr2, .write_cr2 = xen_write_cr2, @@ -2100,6 +2119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { void __init xen_init_mmu_ops(void) { + x86_init.mapping.pagetable_reserve = xen_mapping_pagetable_reserve; x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start; x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done; pv_mmu_ops = xen_mmu_ops; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 141eb0d..58efeb9 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -522,11 +522,20 @@ static bool __init __early_alloc_p2m(unsigned long pfn) /* Boundary cross-over for the edges: */ if (idx) { unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE); + unsigned long *mid_mfn_p; p2m_init(p2m); p2m_top[topidx][mididx] = p2m; + /* For save/restore we need to MFN of the P2M saved */ + + mid_mfn_p = p2m_top_mfn_p[topidx]; + WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing), + "P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n", + topidx, mididx); + mid_mfn_p[mididx] = virt_to_mfn(p2m); + } return idx != 0; } @@ -549,12 +558,29 @@ unsigned long __init set_phys_range_identity(unsigned long pfn_s, pfn += P2M_MID_PER_PAGE * P2M_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == p2m_mid_missing) { - unsigned long **mid = extend_brk(PAGE_SIZE, PAGE_SIZE); + unsigned long *mid_mfn_p; + unsigned long **mid; + + mid = p2m_top[topidx]; + mid_mfn_p = p2m_top_mfn_p[topidx]; + if (mid == p2m_mid_missing) { + mid = extend_brk(PAGE_SIZE, PAGE_SIZE); p2m_mid_init(mid); p2m_top[topidx] = mid; + + BUG_ON(mid_mfn_p != p2m_mid_missing_mfn); + } + /* And the save/restore P2M tables.. */ + if (mid_mfn_p == p2m_mid_missing_mfn) { + mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE); + p2m_mid_mfn_init(mid_mfn_p); + + p2m_top_mfn_p[topidx] = mid_mfn_p; + p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p); + /* Note: we don't set mid_mfn_p[midix] here, + * look in __early_alloc_p2m */ } } @@ -650,7 +676,7 @@ static unsigned long mfn_hash(unsigned long mfn) } /* Add an MFN override for a particular page */ -int m2p_add_override(unsigned long mfn, struct page *page) +int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte) { unsigned long flags; unsigned long pfn; @@ -662,7 +688,6 @@ int m2p_add_override(unsigned long mfn, struct page *page) if (!PageHighMem(page)) { address = (unsigned long)__va(pfn << PAGE_SHIFT); ptep = lookup_address(address, &level); - if (WARN(ptep == NULL || level != PG_LEVEL_4K, "m2p_add_override: pfn %lx not mapped", pfn)) return -EINVAL; @@ -674,18 +699,17 @@ int m2p_add_override(unsigned long mfn, struct page *page) if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) return -ENOMEM; - if (!PageHighMem(page)) + if (clear_pte && !PageHighMem(page)) /* Just zap old mapping for now */ pte_clear(&init_mm, address, ptep); - spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); spin_unlock_irqrestore(&m2p_override_lock, flags); return 0; } - -int m2p_remove_override(struct page *page) +EXPORT_SYMBOL_GPL(m2p_add_override); +int m2p_remove_override(struct page *page, bool clear_pte) { unsigned long flags; unsigned long mfn; @@ -713,7 +737,7 @@ int m2p_remove_override(struct page *page) spin_unlock_irqrestore(&m2p_override_lock, flags); set_phys_to_machine(pfn, page->index); - if (!PageHighMem(page)) + if (clear_pte && !PageHighMem(page)) set_pte_at(&init_mm, address, ptep, pfn_pte(pfn, PAGE_KERNEL)); /* No tlb flush necessary because the caller already @@ -721,6 +745,7 @@ int m2p_remove_override(struct page *page) return 0; } +EXPORT_SYMBOL_GPL(m2p_remove_override); struct page *m2p_find_override(unsigned long mfn) { diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index fa0269a..be1a464 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -50,7 +50,7 @@ phys_addr_t xen_extra_mem_start, xen_extra_mem_size; */ #define EXTRA_MEM_RATIO (10) -static __init void xen_add_extra_mem(unsigned long pages) +static void __init xen_add_extra_mem(unsigned long pages) { unsigned long pfn; @@ -166,7 +166,7 @@ static unsigned long __init xen_set_identity(const struct e820entry *list, if (last > end) continue; - if (entry->type == E820_RAM) { + if ((entry->type == E820_RAM) || (entry->type == E820_UNUSABLE)) { if (start > start_pci) identity += set_phys_range_identity( PFN_UP(start_pci), PFN_DOWN(start)); @@ -227,7 +227,11 @@ char * __init xen_memory_setup(void) memcpy(map_raw, map, sizeof(map)); e820.nr_map = 0; +#ifdef CONFIG_X86_32 xen_extra_mem_start = mem_end; +#else + xen_extra_mem_start = max((1ULL << 32), mem_end); +#endif for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end; @@ -336,7 +340,7 @@ static void __init fiddle_vdso(void) #endif } -static __cpuinit int register_callback(unsigned type, const void *func) +static int __cpuinit register_callback(unsigned type, const void *func) { struct callback_register callback = { .type = type, diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 3061244..41038c0 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -46,18 +46,17 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id); static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id); /* - * Reschedule call back. Nothing to do, - * all the work is done automatically when - * we return from the interrupt. + * Reschedule call back. */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { inc_irq_stat(irq_resched_count); + scheduler_ipi(); return IRQ_HANDLED; } -static __cpuinit void cpu_bringup(void) +static void __cpuinit cpu_bringup(void) { int cpu = smp_processor_id(); @@ -85,7 +84,7 @@ static __cpuinit void cpu_bringup(void) wmb(); /* make sure everything is out */ } -static __cpuinit void cpu_bringup_and_idle(void) +static void __cpuinit cpu_bringup_and_idle(void) { cpu_bringup(); cpu_idle(); @@ -242,7 +241,7 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) } } -static __cpuinit int +static int __cpuinit cpu_initialize_context(unsigned int cpu, struct task_struct *idle) { struct vcpu_guest_context *ctxt; @@ -486,7 +485,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static const struct smp_ops xen_smp_ops __initdata = { +static const struct smp_ops xen_smp_ops __initconst = { .smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu, .smp_prepare_cpus = xen_smp_prepare_cpus, .smp_cpus_done = xen_smp_cpus_done, diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 2e2d370..5158c50 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -26,8 +26,6 @@ #include "xen-ops.h" -#define XEN_SHIFT 22 - /* Xen may fire a timer up to this many ns early */ #define TIMER_SLOP 100000 #define NS_PER_TICK (1000000000LL / HZ) @@ -211,8 +209,6 @@ static struct clocksource xen_clocksource __read_mostly = { .rating = 400, .read = xen_clocksource_get_cycles, .mask = ~0, - .mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */ - .shift = XEN_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -439,16 +435,16 @@ void xen_timer_resume(void) } } -static const struct pv_time_ops xen_time_ops __initdata = { +static const struct pv_time_ops xen_time_ops __initconst = { .sched_clock = xen_clocksource_read, }; -static __init void xen_time_init(void) +static void __init xen_time_init(void) { int cpu = smp_processor_id(); struct timespec tp; - clocksource_register(&xen_clocksource); + clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC); if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) { /* Successfully turned off 100Hz tick, so we have the @@ -468,7 +464,7 @@ static __init void xen_time_init(void) xen_setup_cpu_clockevents(); } -__init void xen_init_time_ops(void) +void __init xen_init_time_ops(void) { pv_time_ops = xen_time_ops; @@ -490,7 +486,7 @@ static void xen_hvm_setup_cpu_clockevents(void) xen_setup_cpu_clockevents(); } -__init void xen_hvm_init_time_ops(void) +void __init xen_hvm_init_time_ops(void) { /* vector callback is needed otherwise we cannot receive interrupts * on cpu > 0 and at this point we don't know how many cpus are diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 3112f55..97dfdc8 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -74,7 +74,7 @@ static inline void xen_hvm_smp_init(void) {} #ifdef CONFIG_PARAVIRT_SPINLOCKS void __init xen_init_spinlocks(void); -__cpuinit void xen_init_lock_cpu(int cpu); +void __cpuinit xen_init_lock_cpu(int cpu); void xen_uninit_lock_cpu(int cpu); #else static inline void xen_init_spinlocks(void) diff --git a/arch/xtensa/include/asm/dma.h b/arch/xtensa/include/asm/dma.h index 137ca39..bb099a3 100644 --- a/arch/xtensa/include/asm/dma.h +++ b/arch/xtensa/include/asm/dma.h @@ -37,7 +37,7 @@ * the size of the statically mapped kernel segment * (XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB. * - * NOTE: When the entire KSEG area is DMA capable, we substract + * NOTE: When the entire KSEG area is DMA capable, we subtract * one from the max address so that the virt_to_phys() macro * works correctly on the address (otherwise the address * enters another area, and virt_to_phys() may not return diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 5fd01f6..6223f33 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1026,7 +1026,7 @@ ENTRY(fast_syscall_unrecoverable) * TRY adds an entry to the __ex_table fixup table for the immediately * following instruction. * - * CATCH catches any exception that occurred at one of the preceeding TRY + * CATCH catches any exception that occurred at one of the preceding TRY * statements and continues from there * * Usage TRY l32i a0, a1, 0 diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index d77089d..4340ee0 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -64,47 +64,41 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) int arch_show_interrupts(struct seq_file *p, int prec) { - int j; - - seq_printf(p, "%*s: ", prec, "NMI"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", nmi_count(j)); - seq_putc(p, '\n'); seq_printf(p, "%*s: ", prec, "ERR"); seq_printf(p, "%10u\n", atomic_read(&irq_err_count)); return 0; } -static void xtensa_irq_mask(struct irq_chip *d) +static void xtensa_irq_mask(struct irq_data *d) { cached_irq_mask &= ~(1 << d->irq); set_sr (cached_irq_mask, INTENABLE); } -static void xtensa_irq_unmask(struct irq_chip *d) +static void xtensa_irq_unmask(struct irq_data *d) { cached_irq_mask |= 1 << d->irq; set_sr (cached_irq_mask, INTENABLE); } -static void xtensa_irq_enable(struct irq_chip *d) +static void xtensa_irq_enable(struct irq_data *d) { variant_irq_enable(d->irq); xtensa_irq_unmask(d->irq); } -static void xtensa_irq_disable(struct irq_chip *d) +static void xtensa_irq_disable(struct irq_data *d) { xtensa_irq_mask(d->irq); variant_irq_disable(d->irq); } -static void xtensa_irq_ack(struct irq_chip *d) +static void xtensa_irq_ack(struct irq_data *d) { set_sr(1 << d->irq, INTCLEAR); } -static int xtensa_irq_retrigger(struct irq_chip *d) +static int xtensa_irq_retrigger(struct irq_data *d) { set_sr (1 << d->irq, INTSET); return 1; |