diff options
Diffstat (limited to 'drivers/i2c')
38 files changed, 2516 insertions, 533 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 11935f6..434a61b 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -2,9 +2,7 @@ # I2C subsystem configuration # -menu "I2C support" - -config I2C +menuconfig I2C tristate "I2C support" ---help--- I2C (pronounce: I-square-C) is a slow serial bus protocol used in @@ -22,9 +20,14 @@ config I2C This I2C support can also be built as a module. If so, the module will be called i2c-core. +if I2C + +config I2C_BOARDINFO + boolean + default y + config I2C_CHARDEV tristate "I2C device interface" - depends on I2C help Say Y here to use i2c-* device files, usually found in the /dev directory on your system. They make it possible to have user-space @@ -40,7 +43,6 @@ source drivers/i2c/chips/Kconfig config I2C_DEBUG_CORE bool "I2C Core debugging messages" - depends on I2C help Say Y here if you want the I2C core to produce a bunch of debug messages to the system log. Select this if you are having a @@ -48,7 +50,6 @@ config I2C_DEBUG_CORE config I2C_DEBUG_ALGO bool "I2C Algorithm debugging messages" - depends on I2C help Say Y here if you want the I2C algorithm drivers to produce a bunch of debug messages to the system log. Select this if you are having @@ -57,7 +58,6 @@ config I2C_DEBUG_ALGO config I2C_DEBUG_BUS bool "I2C Bus debugging messages" - depends on I2C help Say Y here if you want the I2C bus drivers to produce a bunch of debug messages to the system log. Select this if you are having @@ -66,12 +66,10 @@ config I2C_DEBUG_BUS config I2C_DEBUG_CHIP bool "I2C Chip debugging messages" - depends on I2C help Say Y here if you want the I2C chip drivers to produce a bunch of debug messages to the system log. Select this if you are having a problem with I2C support and want to see more of what is going on. -endmenu - +endif # I2C diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 71c5a85..ba26e6c 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -2,6 +2,7 @@ # Makefile for the i2c core. # +obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-y += busses/ chips/ algos/ diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index af02034..5889907 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -3,11 +3,9 @@ # menu "I2C Algorithms" - depends on I2C config I2C_ALGOBIT tristate "I2C bit-banging interfaces" - depends on I2C help This allows you to use a range of I2C adapters called bit-banging adapters. Say Y if you own an I2C adapter belonging to this class @@ -18,7 +16,6 @@ config I2C_ALGOBIT config I2C_ALGOPCF tristate "I2C PCF 8584 interfaces" - depends on I2C help This allows you to use a range of I2C adapters called PCF adapters. Say Y if you own an I2C adapter belonging to this class and then say @@ -29,7 +26,6 @@ config I2C_ALGOPCF config I2C_ALGOPCA tristate "I2C PCA 9564 interfaces" - depends on I2C help This allows you to use a range of I2C adapters called PCA adapters. Say Y if you own an I2C adapter belonging to this class and then say @@ -40,11 +36,11 @@ config I2C_ALGOPCA config I2C_ALGO8XX tristate "MPC8xx CPM I2C interface" - depends on 8xx && I2C + depends on 8xx config I2C_ALGO_SGI tristate "I2C SGI interfaces" - depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS) + depends on SGI_IP22 || SGI_IP32 || X86_VISWS help Supports the SGI interfaces like the ones found on SGI Indy VINO or SGI O2 MACE. diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 95aa539..8a5f582 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -33,19 +33,30 @@ /* ----- global defines ----------------------------------------------- */ -#define DEB(x) if (i2c_debug>=1) x; -#define DEB2(x) if (i2c_debug>=2) x; -#define DEBSTAT(x) if (i2c_debug>=3) x; /* print several statistical values*/ -#define DEBPROTO(x) if (i2c_debug>=9) { x; } - /* debug the protocol by showing transferred bits */ +#ifdef DEBUG +#define bit_dbg(level, dev, format, args...) \ + do { \ + if (i2c_debug >= level) \ + dev_dbg(dev, format, ##args); \ + } while (0) +#else +#define bit_dbg(level, dev, format, args...) \ + do {} while (0) +#endif /* DEBUG */ /* ----- global variables --------------------------------------------- */ -/* module parameters: - */ -static int i2c_debug; static int bit_test; /* see if the line-setting functions work */ +module_param(bit_test, bool, 0); +MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck"); + +#ifdef DEBUG +static int i2c_debug = 1; +module_param(i2c_debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(i2c_debug, + "debug level - 0 off; 1 normal; 2 verbose; 3 very verbose"); +#endif /* --- setting states on the bus with the right timing: --------------- */ @@ -57,19 +68,19 @@ static int bit_test; /* see if the line-setting functions work */ static inline void sdalo(struct i2c_algo_bit_data *adap) { setsda(adap,0); - udelay(adap->udelay); + udelay((adap->udelay + 1) / 2); } static inline void sdahi(struct i2c_algo_bit_data *adap) { setsda(adap,1); - udelay(adap->udelay); + udelay((adap->udelay + 1) / 2); } static inline void scllo(struct i2c_algo_bit_data *adap) { setscl(adap,0); - udelay(adap->udelay); + udelay(adap->udelay / 2); } /* @@ -98,7 +109,11 @@ static int sclhi(struct i2c_algo_bit_data *adap) } cond_resched(); } - DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start)); +#ifdef DEBUG + if (jiffies != start && i2c_debug >= 3) + pr_debug("i2c-algo-bit: needed %ld jiffies for SCL to go " + "high\n", jiffies - start); +#endif done: udelay(adap->udelay); @@ -110,30 +125,29 @@ done: static void i2c_start(struct i2c_algo_bit_data *adap) { /* assert: scl, sda are high */ - DEBPROTO(printk("S ")); - sdalo(adap); + setsda(adap, 0); + udelay(adap->udelay); scllo(adap); } static void i2c_repstart(struct i2c_algo_bit_data *adap) { - /* scl, sda may not be high */ - DEBPROTO(printk(" Sr ")); - setsda(adap,1); + /* assert: scl is low */ + sdahi(adap); sclhi(adap); - - sdalo(adap); + setsda(adap, 0); + udelay(adap->udelay); scllo(adap); } static void i2c_stop(struct i2c_algo_bit_data *adap) { - DEBPROTO(printk("P\n")); /* assert: scl is low */ sdalo(adap); sclhi(adap); - sdahi(adap); + setsda(adap, 1); + udelay(adap->udelay); } @@ -145,7 +159,7 @@ static void i2c_stop(struct i2c_algo_bit_data *adap) * 0 if the device did not ack * -ETIMEDOUT if an error occurred (while raising the scl line) */ -static int i2c_outb(struct i2c_adapter *i2c_adap, char c) +static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c) { int i; int sb; @@ -154,34 +168,32 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, char c) /* assert: scl is low */ for ( i=7 ; i>=0 ; i-- ) { - sb = c & ( 1 << i ); + sb = (c >> i) & 1; setsda(adap,sb); - udelay(adap->udelay); - DEBPROTO(printk(KERN_DEBUG "%d",sb!=0)); + udelay((adap->udelay + 1) / 2); if (sclhi(adap)<0) { /* timed out */ - sdahi(adap); /* we don't want to block the net */ - DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at bit #%d\n", c&0xff, i)); + bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " + "timeout at bit #%d\n", (int)c, i); return -ETIMEDOUT; }; /* do arbitration here: * if ( sb && ! getsda(adap) ) -> ouch! Get out of here. */ - setscl(adap, 0 ); - udelay(adap->udelay); + scllo(adap); } sdahi(adap); if (sclhi(adap)<0){ /* timeout */ - DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x, timeout at ack\n", c&0xff)); - return -ETIMEDOUT; + bit_dbg(1, &i2c_adap->dev, "i2c_outb: 0x%02x, " + "timeout at ack\n", (int)c); + return -ETIMEDOUT; }; /* read ack: SDA should be pulled down by slave */ - ack=getsda(adap); /* ack: sda is pulled low ->success. */ - DEB2(printk(KERN_DEBUG " i2c_outb: 0x%02x , getsda() = %d\n", c & 0xff, ack)); + ack = !getsda(adap); /* ack: sda is pulled low -> success */ + bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c, + ack ? "A" : "NA"); - DEBPROTO( printk(KERN_DEBUG "[%2.2x]",c&0xff) ); - DEBPROTO(if (0==ack){ printk(KERN_DEBUG " A ");} else printk(KERN_DEBUG " NA ") ); scllo(adap); - return 0==ack; /* return 1 if device acked */ + return ack; /* assert: scl is low (sda undef) */ } @@ -198,19 +210,18 @@ static int i2c_inb(struct i2c_adapter *i2c_adap) sdahi(adap); for (i=0;i<8;i++) { if (sclhi(adap)<0) { /* timeout */ - DEB2(printk(KERN_DEBUG " i2c_inb: timeout at bit #%d\n", 7-i)); + bit_dbg(1, &i2c_adap->dev, "i2c_inb: timeout at bit " + "#%d\n", 7 - i); return -ETIMEDOUT; }; indata *= 2; if ( getsda(adap) ) indata |= 0x01; - scllo(adap); + setscl(adap, 0); + udelay(i == 7 ? adap->udelay / 2 : adap->udelay); } /* assert: scl is low */ - DEB2(printk(KERN_DEBUG "i2c_inb: 0x%02x\n", indata & 0xff)); - - DEBPROTO(printk(KERN_DEBUG " 0x%02x", indata & 0xff)); - return (int) (indata & 0xff); + return indata; } /* @@ -221,73 +232,67 @@ static int test_bus(struct i2c_algo_bit_data *adap, char* name) { int scl,sda; if (adap->getscl==NULL) - printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, " - "SCL is not readable.\n"); + pr_info("%s: Testing SDA only, SCL is not readable\n", name); sda=getsda(adap); scl=(adap->getscl==NULL?1:getscl(adap)); - printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda); if (!scl || !sda ) { - printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name); + printk(KERN_WARNING "%s: bus seems to be busy\n", name); goto bailout; } sdalo(adap); sda=getsda(adap); scl=(adap->getscl==NULL?1:getscl(adap)); - printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda); if ( 0 != sda ) { - printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n"); + printk(KERN_WARNING "%s: SDA stuck high!\n", name); goto bailout; } if ( 0 == scl ) { - printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low " - "while pulling SDA low!\n"); + printk(KERN_WARNING "%s: SCL unexpected low " + "while pulling SDA low!\n", name); goto bailout; } sdahi(adap); sda=getsda(adap); scl=(adap->getscl==NULL?1:getscl(adap)); - printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda); if ( 0 == sda ) { - printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n"); + printk(KERN_WARNING "%s: SDA stuck low!\n", name); goto bailout; } if ( 0 == scl ) { - printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low " - "while pulling SDA high!\n"); + printk(KERN_WARNING "%s: SCL unexpected low " + "while pulling SDA high!\n", name); goto bailout; } scllo(adap); sda=getsda(adap); scl=(adap->getscl==NULL?0:getscl(adap)); - printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda); if ( 0 != scl ) { - printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n"); + printk(KERN_WARNING "%s: SCL stuck high!\n", name); goto bailout; } if ( 0 == sda ) { - printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low " - "while pulling SCL low!\n"); + printk(KERN_WARNING "%s: SDA unexpected low " + "while pulling SCL low!\n", name); goto bailout; } sclhi(adap); sda=getsda(adap); scl=(adap->getscl==NULL?1:getscl(adap)); - printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda); if ( 0 == scl ) { - printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n"); + printk(KERN_WARNING "%s: SCL stuck low!\n", name); goto bailout; } if ( 0 == sda ) { - printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low " - "while pulling SCL high!\n"); + printk(KERN_WARNING "%s: SDA unexpected low " + "while pulling SCL high!\n", name); goto bailout; } - printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name); + pr_info("%s: Test OK\n", name); return 0; bailout: sdahi(adap); @@ -312,44 +317,39 @@ static int try_address(struct i2c_adapter *i2c_adap, int i,ret = -1; for (i=0;i<=retries;i++) { ret = i2c_outb(i2c_adap,addr); - if (ret==1) - break; /* success! */ - i2c_stop(adap); - udelay(5/*adap->udelay*/); - if (i==retries) /* no success */ + if (ret == 1 || i == retries) break; - i2c_start(adap); + bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n"); + i2c_stop(adap); udelay(adap->udelay); + yield(); + bit_dbg(3, &i2c_adap->dev, "emitting start condition\n"); + i2c_start(adap); } - DEB2(if (i) - printk(KERN_DEBUG "i2c-algo-bit.o: Used %d tries to %s client at 0x%02x : %s\n", - i+1, addr & 1 ? "read" : "write", addr>>1, - ret==1 ? "success" : ret==0 ? "no ack" : "failed, timeout?" ) - ); + if (i && ret) + bit_dbg(1, &i2c_adap->dev, "Used %d tries to %s client at " + "0x%02x: %s\n", i + 1, + addr & 1 ? "read from" : "write to", addr >> 1, + ret == 1 ? "success" : "failed, timeout?"); return ret; } static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) { - struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - char c; - const char *temp = msg->buf; + const unsigned char *temp = msg->buf; int count = msg->len; unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK; int retval; int wrcount=0; while (count > 0) { - c = *temp; - DEB2(dev_dbg(&i2c_adap->dev, "sendbytes: writing %2.2X\n", c&0xff)); - retval = i2c_outb(i2c_adap,c); + retval = i2c_outb(i2c_adap, *temp); if ((retval>0) || (nak_ok && (retval==0))) { /* ok or ignored NAK */ count--; temp++; wrcount++; } else { /* arbitration or no acknowledge */ dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n"); - i2c_stop(adap); return (retval<0)? retval : -EFAULT; /* got a better one ?? */ } @@ -362,7 +362,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) int inval; int rdcount=0; /* counts bytes read */ struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - char *temp = msg->buf; + unsigned char *temp = msg->buf; int count = msg->len; while (count > 0) { @@ -371,30 +371,44 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) *temp = inval; rdcount++; } else { /* read timed out */ - printk(KERN_ERR "i2c-algo-bit.o: readbytes: i2c_inb timed out.\n"); break; } temp++; count--; - if (msg->flags & I2C_M_NO_RD_ACK) + if (msg->flags & I2C_M_NO_RD_ACK) { + bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n", + inval); continue; - - if ( count > 0 ) { /* send ack */ - sdalo(adap); - DEBPROTO(printk(" Am ")); - } else { - sdahi(adap); /* neg. ack on last byte */ - DEBPROTO(printk(" NAm ")); } + + /* assert: sda is high */ + if (count) /* send ack */ + setsda(adap, 0); + udelay((adap->udelay + 1) / 2); + bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval, + count ? "A" : "NA"); if (sclhi(adap)<0) { /* timeout */ - sdahi(adap); - printk(KERN_ERR "i2c-algo-bit.o: readbytes: Timeout at ack\n"); + dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n"); return -ETIMEDOUT; }; scllo(adap); - sdahi(adap); + + /* Some SMBus transactions require that we receive the + transaction length as the first read byte. */ + if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) { + if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) { + dev_err(&i2c_adap->dev, "readbytes: invalid " + "block length (%d)\n", inval); + return -EREMOTEIO; + } + /* The original count value accounts for the extra + bytes, that is, either 1 for a regular transaction, + or 2 for a PEC transaction. */ + count += inval; + msg->len += inval; + } } return rdcount; } @@ -421,27 +435,31 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if ( (flags & I2C_M_TEN) ) { /* a ten bit address */ addr = 0xf0 | (( msg->addr >> 7) & 0x03); - DEB2(printk(KERN_DEBUG "addr0: %d\n",addr)); + bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr); /* try extended address code...*/ ret = try_address(i2c_adap, addr, retries); if ((ret != 1) && !nak_ok) { - printk(KERN_ERR "died at extended address code.\n"); + dev_err(&i2c_adap->dev, + "died at extended address code\n"); return -EREMOTEIO; } /* the remaining 8 bit address */ ret = i2c_outb(i2c_adap,msg->addr & 0x7f); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ - printk(KERN_ERR "died at 2nd address code.\n"); + dev_err(&i2c_adap->dev, "died at 2nd address code\n"); return -EREMOTEIO; } if ( flags & I2C_M_RD ) { + bit_dbg(3, &i2c_adap->dev, "emitting repeated " + "start condition\n"); i2c_repstart(adap); /* okay, now switch into reading mode */ addr |= 0x01; ret = try_address(i2c_adap, addr, retries); if ((ret!=1) && !nak_ok) { - printk(KERN_ERR "died at extended address code.\n"); + dev_err(&i2c_adap->dev, + "died at repeated address code\n"); return -EREMOTEIO; } } @@ -468,44 +486,62 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, int i,ret; unsigned short nak_ok; + bit_dbg(3, &i2c_adap->dev, "emitting start condition\n"); i2c_start(adap); for (i=0;i<num;i++) { pmsg = &msgs[i]; nak_ok = pmsg->flags & I2C_M_IGNORE_NAK; if (!(pmsg->flags & I2C_M_NOSTART)) { if (i) { + bit_dbg(3, &i2c_adap->dev, "emitting " + "repeated start condition\n"); i2c_repstart(adap); } ret = bit_doAddress(i2c_adap, pmsg); if ((ret != 0) && !nak_ok) { - DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: NAK from device addr %2.2x msg #%d\n" - ,msgs[i].addr,i)); - return (ret<0) ? ret : -EREMOTEIO; + bit_dbg(1, &i2c_adap->dev, "NAK from " + "device addr 0x%02x msg #%d\n", + msgs[i].addr, i); + goto bailout; } } if (pmsg->flags & I2C_M_RD ) { /* read bytes into buffer*/ ret = readbytes(i2c_adap, pmsg); - DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: read %d bytes.\n",ret)); - if (ret < pmsg->len ) { - return (ret<0)? ret : -EREMOTEIO; + if (ret >= 1) + bit_dbg(2, &i2c_adap->dev, "read %d byte%s\n", + ret, ret == 1 ? "" : "s"); + if (ret < pmsg->len) { + if (ret >= 0) + ret = -EREMOTEIO; + goto bailout; } } else { /* write bytes from buffer */ ret = sendbytes(i2c_adap, pmsg); - DEB2(printk(KERN_DEBUG "i2c-algo-bit.o: wrote %d bytes.\n",ret)); - if (ret < pmsg->len ) { - return (ret<0) ? ret : -EREMOTEIO; + if (ret >= 1) + bit_dbg(2, &i2c_adap->dev, "wrote %d byte%s\n", + ret, ret == 1 ? "" : "s"); + if (ret < pmsg->len) { + if (ret >= 0) + ret = -EREMOTEIO; + goto bailout; } } } + ret = i; + +bailout: + bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n"); i2c_stop(adap); - return num; + return ret; } static u32 bit_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; } @@ -520,7 +556,7 @@ static const struct i2c_algorithm i2c_bit_algo = { /* * registering functions to load algorithms at runtime */ -int i2c_bit_add_bus(struct i2c_adapter *adap) +static int i2c_bit_prepare_bus(struct i2c_adapter *adap) { struct i2c_algo_bit_data *bit_adap = adap->algo_data; @@ -530,25 +566,39 @@ int i2c_bit_add_bus(struct i2c_adapter *adap) return -ENODEV; } - DEB2(dev_dbg(&adap->dev, "hw routines registered.\n")); - /* register new adapter to i2c module... */ adap->algo = &i2c_bit_algo; adap->timeout = 100; /* default values, should */ adap->retries = 3; /* be replaced by defines */ + return 0; +} + +int i2c_bit_add_bus(struct i2c_adapter *adap) +{ + int err; + + err = i2c_bit_prepare_bus(adap); + if (err) + return err; + return i2c_add_adapter(adap); } EXPORT_SYMBOL(i2c_bit_add_bus); +int i2c_bit_add_numbered_bus(struct i2c_adapter *adap) +{ + int err; + + err = i2c_bit_prepare_bus(adap); + if (err) + return err; + + return i2c_add_numbered_adapter(adap); +} +EXPORT_SYMBOL(i2c_bit_add_numbered_bus); + MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm"); MODULE_LICENSE("GPL"); - -module_param(bit_test, bool, 0); -module_param(i2c_debug, int, S_IRUGO | S_IWUSR); - -MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck"); -MODULE_PARM_DESC(i2c_debug, - "debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol"); diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c index ac2d505..6eaf145 100644 --- a/drivers/i2c/algos/i2c-algo-sgi.c +++ b/drivers/i2c/algos/i2c-algo-sgi.c @@ -1,6 +1,7 @@ /* - * i2c-algo-sgi.c: i2c driver algorithms for SGI adapters. - * + * i2c-algo-sgi.c: i2c driver algorithm used by the VINO (SGI Indy) and + * MACE (SGI O2) chips. + * * This file is subject to the terms and conditions of the GNU General Public * License version 2 as published by the Free Software Foundation. * @@ -162,8 +163,8 @@ static const struct i2c_algorithm sgi_algo = { .functionality = sgi_func, }; -/* - * registering functions to load algorithms at runtime +/* + * registering functions to load algorithms at runtime */ int i2c_sgi_add_bus(struct i2c_adapter *adap) { diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ece31d2..838dc1c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -3,11 +3,10 @@ # menu "I2C Hardware Bus support" - depends on I2C config I2C_ALI1535 tristate "ALI 1535" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the SMB Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB @@ -19,7 +18,7 @@ config I2C_ALI1535 config I2C_ALI1563 tristate "ALI 1563" - depends on I2C && PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SMB Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB @@ -31,7 +30,7 @@ config I2C_ALI1563 config I2C_ALI15X3 tristate "ALI 15x3" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. @@ -41,7 +40,7 @@ config I2C_ALI15X3 config I2C_AMD756 tristate "AMD 756/766/768/8111 and nVidia nForce" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the AMD 756/766/768 mainboard I2C interfaces. The driver also includes @@ -66,7 +65,7 @@ config I2C_AMD756_S4882 config I2C_AMD8111 tristate "AMD 8111" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the second (SMBus 2.0) AMD 8111 mainboard I2C interface. @@ -76,14 +75,14 @@ config I2C_AMD8111 config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on I2C && ARCH_AT91 && EXPERIMENTAL + depends on ARCH_AT91 && EXPERIMENTAL help This supports the use of the I2C interface on Atmel AT91 processors. config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" - depends on I2C && (SOC_AU1550 || SOC_AU1200) + depends on SOC_AU1550 || SOC_AU1200 help If you say yes to this option, support will be included for the Au1550 and Au1200 SMBus interface. @@ -91,9 +90,25 @@ config I2C_AU1550 This driver can also be built as a module. If so, the module will be called i2c-au1550. +config I2C_BLACKFIN_TWI + tristate "Blackfin TWI I2C support" + depends on BF534 || BF536 || BF537 + help + This is the TWI I2C device driver for Blackfin 534/536/537. + This driver can also be built as a module. If so, the module + will be called i2c-bfin-twi. + +config I2C_BLACKFIN_TWI_CLK_KHZ + int "Blackfin TWI I2C clock (kHz)" + depends on I2C_BLACKFIN_TWI + range 10 400 + default 50 + help + The unit of the TWI clock is kHz. + config I2C_ELEKTOR tristate "Elektor ISA card" - depends on I2C && ISA && BROKEN_ON_SMP + depends on ISA && BROKEN_ON_SMP select I2C_ALGOPCF help This supports the PCF8584 ISA bus I2C adapter. Say Y if you own @@ -102,9 +117,17 @@ config I2C_ELEKTOR This support is also available as a module. If so, the module will be called i2c-elektor. +config I2C_GPIO + tristate "GPIO-based bitbanging I2C" + depends on GENERIC_GPIO + select I2C_ALGOBIT + help + This is a very simple bitbanging I2C driver utilizing the + arch-neutral GPIO API to control the SCL and SDA lines. + config I2C_HYDRA tristate "CHRP Apple Hydra Mac I/O I2C interface" - depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL + depends on PCI && PPC_CHRP && EXPERIMENTAL select I2C_ALGOBIT help This supports the use of the I2C interface in the Apple Hydra Mac @@ -116,7 +139,7 @@ config I2C_HYDRA config I2C_I801 tristate "Intel 82801 (ICH)" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following @@ -139,7 +162,7 @@ config I2C_I801 config I2C_I810 tristate "Intel 810/815" - depends on I2C && PCI + depends on PCI select I2C_ALGOBIT help If you say yes to this option, support will be included for the Intel @@ -156,7 +179,7 @@ config I2C_I810 config I2C_PXA tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" - depends on I2C && EXPERIMENTAL && ARCH_PXA + depends on EXPERIMENTAL && ARCH_PXA help If you have devices in the PXA I2C bus, say yes to this option. This driver can also be built as a module. If so, the module @@ -172,7 +195,7 @@ config I2C_PXA_SLAVE config I2C_PIIX4 tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the Intel PIIX4 family of mainboard I2C interfaces. Specifically, the following @@ -195,7 +218,7 @@ config I2C_PIIX4 config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" - depends on IBM_OCP && I2C + depends on IBM_OCP help Say Y here if you want to use IIC peripheral found on embedded IBM PPC 4xx based systems. @@ -205,7 +228,7 @@ config I2C_IBM_IIC config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" - depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX help Say Y here if you want to use the IIC bus controller on the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. @@ -215,11 +238,10 @@ config I2C_IOP3XX config I2C_ISA tristate - depends on I2C config I2C_IXP4XX - tristate "IXP4xx GPIO-Based I2C Interface" - depends on I2C && ARCH_IXP4XX + tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)" + depends on ARCH_IXP4XX select I2C_ALGOBIT help Say Y here if you have an Intel IXP4xx(420,421,422,425) based @@ -228,9 +250,12 @@ config I2C_IXP4XX This support is also available as a module. If so, the module will be called i2c-ixp4xx. + This driver is deprecated and will be dropped soon. Use i2c-gpio + instead. + config I2C_IXP2000 - tristate "IXP2000 GPIO-Based I2C Interface" - depends on I2C && ARCH_IXP2000 + tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" + depends on ARCH_IXP2000 select I2C_ALGOBIT help Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based @@ -239,9 +264,12 @@ config I2C_IXP2000 This support is also available as a module. If so, the module will be called i2c-ixp2000. + This driver is deprecated and will be dropped soon. Use i2c-gpio + instead. + config I2C_POWERMAC tristate "Powermac I2C interface" - depends on I2C && PPC_PMAC + depends on PPC_PMAC default y help This exposes the various PowerMac i2c interfaces to the linux i2c @@ -253,7 +281,7 @@ config I2C_POWERMAC config I2C_MPC tristate "MPC107/824x/85xx/52xx/86xx" - depends on I2C && PPC32 + depends on PPC32 help If you say yes to this option, support will be included for the built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and @@ -265,7 +293,7 @@ config I2C_MPC config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the Nvidia nForce2, nForce3 and nForce4 families of mainboard I2C interfaces. @@ -275,7 +303,7 @@ config I2C_NFORCE2 config I2C_OCORES tristate "OpenCores I2C Controller" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes to this option, support will be included for the OpenCores I2C controller. For details see @@ -286,7 +314,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" - depends on I2C && ARCH_OMAP + depends on ARCH_OMAP default y if MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes to this option, support will be included for the @@ -296,7 +324,7 @@ config I2C_OMAP config I2C_PARPORT tristate "Parallel port adapter" - depends on I2C && PARPORT + depends on PARPORT select I2C_ALGOBIT help This supports parallel port I2C adapters such as the ones made by @@ -320,7 +348,6 @@ config I2C_PARPORT config I2C_PARPORT_LIGHT tristate "Parallel port adapter (light)" - depends on I2C select I2C_ALGOBIT help This supports parallel port I2C adapters such as the ones made by @@ -344,13 +371,13 @@ config I2C_PARPORT_LIGHT config I2C_PASEMI tristate "PA Semi SMBus interface" - depends on PPC_PASEMI && I2C && PCI + depends on PPC_PASEMI && PCI help Supports the PA Semi PWRficient on-chip SMBus interfaces. config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" - depends on I2C && PCI + depends on PCI select I2C_ALGOBIT help If you say yes to this option, support will be included for the @@ -365,19 +392,19 @@ config I2C_PROSAVAGE config I2C_RPXLITE tristate "Embedded Planet RPX Lite/Classic support" - depends on (RPXLITE || RPXCLASSIC) && I2C + depends on RPXLITE || RPXCLASSIC select I2C_ALGO8XX config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on I2C && ARCH_S3C2410 + depends on ARCH_S3C2410 help Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. config I2C_SAVAGE4 tristate "S3 Savage 4" - depends on I2C && PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL select I2C_ALGOBIT help If you say yes to this option, support will be included for the @@ -388,13 +415,25 @@ config I2C_SAVAGE4 config I2C_SIBYTE tristate "SiByte SMBus interface" - depends on SIBYTE_SB1xxx_SOC && I2C + depends on SIBYTE_SB1xxx_SOC help Supports the SiByte SOC on-chip I2C interfaces (2 channels). +config I2C_SIMTEC + tristate "Simtec Generic I2C interface" + select I2C_ALGOBIT + help + If you say yes to this option, support will be inclyded for + the Simtec Generic I2C interface. This driver is for the + simple I2C bus used on newer Simtec products for general + I2C, such as DDC on the Simtec BBD2016A. + + This driver can also be build as a module. If so, the module + will be called i2c-simtec. + config SCx200_I2C - tristate "NatSemi SCx200 I2C using GPIO pins" - depends on SCx200_GPIO && I2C + tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" + depends on SCx200_GPIO select I2C_ALGOBIT help Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. @@ -404,6 +443,9 @@ config SCx200_I2C This support is also available as a module. If so, the module will be called scx200_i2c. + This driver is deprecated and will be dropped soon. Use i2c-gpio + (or scx200_acb) instead. + config SCx200_I2C_SCL int "GPIO pin used for SCL" depends on SCx200_I2C @@ -422,7 +464,7 @@ config SCx200_I2C_SDA config SCx200_ACB tristate "Geode ACCESS.bus support" - depends on X86_32 && I2C && PCI + depends on X86_32 && PCI help Enable the use of the ACCESS.bus controllers on the Geode SCx200 and SC1100 processors and the CS5535 and CS5536 Geode companion devices. @@ -434,7 +476,7 @@ config SCx200_ACB config I2C_SIS5595 tristate "SiS 5595" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the SiS5595 SMBus (a subset of I2C) interface. @@ -444,7 +486,7 @@ config I2C_SIS5595 config I2C_SIS630 tristate "SiS 630/730" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the SiS630 and SiS730 SMBus (a subset of I2C) interface. @@ -454,7 +496,7 @@ config I2C_SIS630 config I2C_SIS96X tristate "SiS 96x" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the SiS 96x SMBus (a subset of I2C) interfaces. Specifically, the following @@ -472,7 +514,7 @@ config I2C_SIS96X config I2C_STUB tristate "I2C/SMBus Test Stub" - depends on I2C && EXPERIMENTAL && 'm' + depends on EXPERIMENTAL && m default 'n' help This module may be useful to developers of SMBus client drivers, @@ -483,9 +525,20 @@ config I2C_STUB If you don't know what to do here, definitely say N. +config I2C_TINY_USB + tristate "I2C-Tiny-USB" + depends on USB + help + If you say yes to this option, support will be included for the + i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See + http://www.harbaum.org/till/i2c_tiny_usb for hardware details. + + This driver can also be built as a module. If so, the module + will be called i2c-tiny-usb. + config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" - depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW) + depends on ARCH_VERSATILE || ARCH_REALVIEW select I2C_ALGOBIT help Say yes if you want to support the I2C serial bus on ARMs Versatile @@ -496,7 +549,7 @@ config I2C_VERSATILE config I2C_ACORN bool "Acorn IOC/IOMD I2C bus support" - depends on I2C && ARCH_ACORN + depends on ARCH_ACORN default y select I2C_ALGOBIT help @@ -506,7 +559,7 @@ config I2C_ACORN config I2C_VIA tristate "VIA 82C586B" - depends on I2C && PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL select I2C_ALGOBIT help If you say yes to this option, support will be included for the VIA @@ -517,7 +570,7 @@ config I2C_VIA config I2C_VIAPRO tristate "VIA VT82C596/82C686/82xx and CX700" - depends on I2C && PCI + depends on PCI help If you say yes to this option, support will be included for the VIA VT82C596 and later SMBus interface. Specifically, the following @@ -536,7 +589,7 @@ config I2C_VIAPRO config I2C_VOODOO3 tristate "Voodoo 3" - depends on I2C && PCI + depends on PCI select I2C_ALGOBIT help If you say yes to this option, support will be included for the @@ -547,7 +600,7 @@ config I2C_VOODOO3 config I2C_PCA_ISA tristate "PCA9564 on an ISA bus" - depends on I2C + depends on ISA select I2C_ALGOPCA default n help @@ -564,7 +617,7 @@ config I2C_PCA_ISA config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on I2C && MV64X60 && EXPERIMENTAL + depends on MV64X60 && EXPERIMENTAL help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -574,7 +627,7 @@ config I2C_MV64XXX config I2C_PNX tristate "I2C bus support for Philips PNX targets" - depends on ARCH_PNX4008 && I2C + depends on ARCH_PNX4008 help This driver supports the Philips IP3204 I2C IP block master and/or slave controller diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 290b540..14d1432 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -10,7 +10,9 @@ obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o +obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o +obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_I801) += i2c-i801.o obj-$(CONFIG_I2C_I810) += i2c-i810.o @@ -37,10 +39,12 @@ obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o +obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_VIA) += i2c-via.o diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 1e277ba..f14372a 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -497,7 +497,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_ /* set up the sysfs linkage to our parent device */ ali1535_adapter.dev.parent = &dev->dev; - snprintf(ali1535_adapter.name, I2C_NAME_SIZE, + snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name), "SMBus ALI1535 adapter at %04x", ali1535_smba); return i2c_add_adapter(&ali1535_adapter); } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e47fe01..93bf87d 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -492,7 +492,7 @@ static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_ /* set up the sysfs linkage to our parent device */ ali15x3_adapter.dev.parent = &dev->dev; - snprintf(ali15x3_adapter.name, I2C_NAME_SIZE, + snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name), "SMBus ALI15X3 adapter at %04x", ali15x3_smba); return i2c_add_adapter(&ali15x3_adapter); } diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0c70f82..c9fca7b 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -365,7 +365,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, } smbus->adapter.owner = THIS_MODULE; - snprintf(smbus->adapter.name, I2C_NAME_SIZE, + snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON; diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 67f91bd..f35156c 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -17,7 +17,6 @@ #include <linux/version.h> #include <linux/kernel.h> #include <linux/slab.h> -#include <linux/pci.h> #include <linux/types.h> #include <linux/delay.h> #include <linux/i2c.h> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c new file mode 100644 index 0000000..6311039 --- /dev/null +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -0,0 +1,644 @@ +/* + * drivers/i2c/busses/i2c-bfin-twi.c + * + * Description: Driver for Blackfin Two Wire Interface + * + * Author: sonicz <sonic.zhang@analog.com> + * + * Copyright (c) 2005-2007 Analog Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mm.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <asm/blackfin.h> +#include <asm/irq.h> + +#define POLL_TIMEOUT (2 * HZ) + +/* SMBus mode*/ +#define TWI_I2C_MODE_STANDARD 0x01 +#define TWI_I2C_MODE_STANDARDSUB 0x02 +#define TWI_I2C_MODE_COMBINED 0x04 + +struct bfin_twi_iface { + struct mutex twi_lock; + int irq; + spinlock_t lock; + char read_write; + u8 command; + u8 *transPtr; + int readNum; + int writeNum; + int cur_mode; + int manual_stop; + int result; + int timeout_count; + struct timer_list timeout_timer; + struct i2c_adapter adap; + struct completion complete; +}; + +static struct bfin_twi_iface twi_iface; + +static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface) +{ + unsigned short twi_int_status = bfin_read_TWI_INT_STAT(); + unsigned short mast_stat = bfin_read_TWI_MASTER_STAT(); + + if (twi_int_status & XMTSERV) { + /* Transmit next data */ + if (iface->writeNum > 0) { + bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); + iface->writeNum--; + } + /* start receive immediately after complete sending in + * combine mode. + */ + else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() + | MDIR | RSTART); + } else if (iface->manual_stop) + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() + | STOP); + SSYNC(); + /* Clear status */ + bfin_write_TWI_INT_STAT(XMTSERV); + SSYNC(); + } + if (twi_int_status & RCVSERV) { + if (iface->readNum > 0) { + /* Receive next data */ + *(iface->transPtr) = bfin_read_TWI_RCV_DATA8(); + if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + /* Change combine mode into sub mode after + * read first data. + */ + iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; + /* Get read number from first byte in block + * combine mode. + */ + if (iface->readNum == 1 && iface->manual_stop) + iface->readNum = *iface->transPtr + 1; + } + iface->transPtr++; + iface->readNum--; + } else if (iface->manual_stop) { + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() + | STOP); + SSYNC(); + } + /* Clear interrupt source */ + bfin_write_TWI_INT_STAT(RCVSERV); + SSYNC(); + } + if (twi_int_status & MERR) { + bfin_write_TWI_INT_STAT(MERR); + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_STAT(0x3e); + bfin_write_TWI_MASTER_CTL(0); + SSYNC(); + iface->result = -1; + /* if both err and complete int stats are set, return proper + * results. + */ + if (twi_int_status & MCOMP) { + bfin_write_TWI_INT_STAT(MCOMP); + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_CTL(0); + SSYNC(); + /* If it is a quick transfer, only address bug no data, + * not an err, return 1. + */ + if (iface->writeNum == 0 && (mast_stat & BUFRDERR)) + iface->result = 1; + /* If address not acknowledged return -1, + * else return 0. + */ + else if (!(mast_stat & ANAK)) + iface->result = 0; + } + complete(&iface->complete); + return; + } + if (twi_int_status & MCOMP) { + bfin_write_TWI_INT_STAT(MCOMP); + SSYNC(); + if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + if (iface->readNum == 0) { + /* set the read number to 1 and ask for manual + * stop in block combine mode + */ + iface->readNum = 1; + iface->manual_stop = 1; + bfin_write_TWI_MASTER_CTL( + bfin_read_TWI_MASTER_CTL() + | (0xff << 6)); + } else { + /* set the readd number in other + * combine mode. + */ + bfin_write_TWI_MASTER_CTL( + (bfin_read_TWI_MASTER_CTL() & + (~(0xff << 6))) | + ( iface->readNum << 6)); + } + /* remove restart bit and enable master receive */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() & + ~RSTART); + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | + MEN | MDIR); + SSYNC(); + } else { + iface->result = 1; + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_CTL(0); + SSYNC(); + complete(&iface->complete); + } + } +} + +/* Interrupt handler */ +static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id) +{ + struct bfin_twi_iface *iface = dev_id; + unsigned long flags; + + spin_lock_irqsave(&iface->lock, flags); + del_timer(&iface->timeout_timer); + bfin_twi_handle_interrupt(iface); + spin_unlock_irqrestore(&iface->lock, flags); + return IRQ_HANDLED; +} + +static void bfin_twi_timeout(unsigned long data) +{ + struct bfin_twi_iface *iface = (struct bfin_twi_iface *)data; + unsigned long flags; + + spin_lock_irqsave(&iface->lock, flags); + bfin_twi_handle_interrupt(iface); + if (iface->result == 0) { + iface->timeout_count--; + if (iface->timeout_count > 0) { + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); + } else { + iface->result = -1; + complete(&iface->complete); + } + } + spin_unlock_irqrestore(&iface->lock, flags); +} + +/* + * Generic i2c master transfer entrypoint + */ +static int bfin_twi_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct bfin_twi_iface *iface = adap->algo_data; + struct i2c_msg *pmsg; + int i, ret; + int rc = 0; + + if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) + return -ENXIO; + + mutex_lock(&iface->twi_lock); + + while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) { + mutex_unlock(&iface->twi_lock); + yield(); + mutex_lock(&iface->twi_lock); + } + + ret = 0; + for (i = 0; rc >= 0 && i < num; i++) { + pmsg = &msgs[i]; + if (pmsg->flags & I2C_M_TEN) { + dev_err(&(adap->dev), "i2c-bfin-twi: 10 bits addr " + "not supported !\n"); + rc = -EINVAL; + break; + } + + iface->cur_mode = TWI_I2C_MODE_STANDARD; + iface->manual_stop = 0; + iface->transPtr = pmsg->buf; + iface->writeNum = iface->readNum = pmsg->len; + iface->result = 0; + iface->timeout_count = 10; + /* Set Transmit device address */ + bfin_write_TWI_MASTER_ADDR(pmsg->addr); + + /* FIFO Initiation. Data in FIFO should be + * discarded before start a new operation. + */ + bfin_write_TWI_FIFO_CTL(0x3); + SSYNC(); + bfin_write_TWI_FIFO_CTL(0); + SSYNC(); + + if (pmsg->flags & I2C_M_RD) + iface->read_write = I2C_SMBUS_READ; + else { + iface->read_write = I2C_SMBUS_WRITE; + /* Transmit first data */ + if (iface->writeNum > 0) { + bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); + iface->writeNum--; + SSYNC(); + } + } + + /* clear int stat */ + bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV); + + /* Interrupt mask . Enable XMT, RCV interrupt */ + bfin_write_TWI_INT_MASK(MCOMP | MERR | + ((iface->read_write == I2C_SMBUS_READ)? + RCVSERV : XMTSERV)); + SSYNC(); + + if (pmsg->len > 0 && pmsg->len <= 255) + bfin_write_TWI_MASTER_CTL(pmsg->len << 6); + else if (pmsg->len > 255) { + bfin_write_TWI_MASTER_CTL(0xff << 6); + iface->manual_stop = 1; + } else + break; + + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); + + /* Master enable */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | + ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); + SSYNC(); + + wait_for_completion(&iface->complete); + + rc = iface->result; + if (rc == 1) + ret++; + else if (rc == -1) + break; + } + + /* Release mutex */ + mutex_unlock(&iface->twi_lock); + + return ret; +} + +/* + * SMBus type transfer entrypoint + */ + +int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct bfin_twi_iface *iface = adap->algo_data; + int rc = 0; + + if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) + return -ENXIO; + + mutex_lock(&iface->twi_lock); + + while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) { + mutex_unlock(&iface->twi_lock); + yield(); + mutex_lock(&iface->twi_lock); + } + + iface->writeNum = 0; + iface->readNum = 0; + + /* Prepare datas & select mode */ + switch (size) { + case I2C_SMBUS_QUICK: + iface->transPtr = NULL; + iface->cur_mode = TWI_I2C_MODE_STANDARD; + break; + case I2C_SMBUS_BYTE: + if (data == NULL) + iface->transPtr = NULL; + else { + if (read_write == I2C_SMBUS_READ) + iface->readNum = 1; + else + iface->writeNum = 1; + iface->transPtr = &data->byte; + } + iface->cur_mode = TWI_I2C_MODE_STANDARD; + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) { + iface->readNum = 1; + iface->cur_mode = TWI_I2C_MODE_COMBINED; + } else { + iface->writeNum = 1; + iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; + } + iface->transPtr = &data->byte; + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) { + iface->readNum = 2; + iface->cur_mode = TWI_I2C_MODE_COMBINED; + } else { + iface->writeNum = 2; + iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; + } + iface->transPtr = (u8 *)&data->word; + break; + case I2C_SMBUS_PROC_CALL: + iface->writeNum = 2; + iface->readNum = 2; + iface->cur_mode = TWI_I2C_MODE_COMBINED; + iface->transPtr = (u8 *)&data->word; + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + iface->readNum = 0; + iface->cur_mode = TWI_I2C_MODE_COMBINED; + } else { + iface->writeNum = data->block[0] + 1; + iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; + } + iface->transPtr = data->block; + break; + default: + return -1; + } + + iface->result = 0; + iface->manual_stop = 0; + iface->read_write = read_write; + iface->command = command; + iface->timeout_count = 10; + + /* FIFO Initiation. Data in FIFO should be discarded before + * start a new operation. + */ + bfin_write_TWI_FIFO_CTL(0x3); + SSYNC(); + bfin_write_TWI_FIFO_CTL(0); + + /* clear int stat */ + bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV); + + /* Set Transmit device address */ + bfin_write_TWI_MASTER_ADDR(addr); + SSYNC(); + + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); + + switch (iface->cur_mode) { + case TWI_I2C_MODE_STANDARDSUB: + bfin_write_TWI_XMT_DATA8(iface->command); + bfin_write_TWI_INT_MASK(MCOMP | MERR | + ((iface->read_write == I2C_SMBUS_READ) ? + RCVSERV : XMTSERV)); + SSYNC(); + + if (iface->writeNum + 1 <= 255) + bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6); + else { + bfin_write_TWI_MASTER_CTL(0xff << 6); + iface->manual_stop = 1; + } + /* Master enable */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); + break; + case TWI_I2C_MODE_COMBINED: + bfin_write_TWI_XMT_DATA8(iface->command); + bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV); + SSYNC(); + + if (iface->writeNum > 0) + bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6); + else + bfin_write_TWI_MASTER_CTL(0x1 << 6); + /* Master enable */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); + break; + default: + bfin_write_TWI_MASTER_CTL(0); + if (size != I2C_SMBUS_QUICK) { + /* Don't access xmit data register when this is a + * read operation. + */ + if (iface->read_write != I2C_SMBUS_READ) { + if (iface->writeNum > 0) { + bfin_write_TWI_XMT_DATA8(*(iface->transPtr++)); + if (iface->writeNum <= 255) + bfin_write_TWI_MASTER_CTL(iface->writeNum << 6); + else { + bfin_write_TWI_MASTER_CTL(0xff << 6); + iface->manual_stop = 1; + } + iface->writeNum--; + } else { + bfin_write_TWI_XMT_DATA8(iface->command); + bfin_write_TWI_MASTER_CTL(1 << 6); + } + } else { + if (iface->readNum > 0 && iface->readNum <= 255) + bfin_write_TWI_MASTER_CTL(iface->readNum << 6); + else if (iface->readNum > 255) { + bfin_write_TWI_MASTER_CTL(0xff << 6); + iface->manual_stop = 1; + } else { + del_timer(&iface->timeout_timer); + break; + } + } + } + bfin_write_TWI_INT_MASK(MCOMP | MERR | + ((iface->read_write == I2C_SMBUS_READ) ? + RCVSERV : XMTSERV)); + SSYNC(); + + /* Master enable */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | + ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); + break; + } + SSYNC(); + + wait_for_completion(&iface->complete); + + rc = (iface->result >= 0) ? 0 : -1; + + /* Release mutex */ + mutex_unlock(&iface->twi_lock); + + return rc; +} + +/* + * Return what the adapter supports + */ +static u32 bfin_twi_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_I2C; +} + + +static struct i2c_algorithm bfin_twi_algorithm = { + .master_xfer = bfin_twi_master_xfer, + .smbus_xfer = bfin_twi_smbus_xfer, + .functionality = bfin_twi_functionality, +}; + + +static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state) +{ +/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/ + + /* Disable TWI */ + bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA); + SSYNC(); + + return 0; +} + +static int i2c_bfin_twi_resume(struct platform_device *dev) +{ +/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/ + + /* Enable TWI */ + bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); + SSYNC(); + + return 0; +} + +static int i2c_bfin_twi_probe(struct platform_device *dev) +{ + struct bfin_twi_iface *iface = &twi_iface; + struct i2c_adapter *p_adap; + int rc; + + mutex_init(&(iface->twi_lock)); + spin_lock_init(&(iface->lock)); + init_completion(&(iface->complete)); + iface->irq = IRQ_TWI; + + init_timer(&(iface->timeout_timer)); + iface->timeout_timer.function = bfin_twi_timeout; + iface->timeout_timer.data = (unsigned long)iface; + + p_adap = &iface->adap; + p_adap->id = I2C_HW_BLACKFIN; + strlcpy(p_adap->name, dev->name, sizeof(p_adap->name)); + p_adap->algo = &bfin_twi_algorithm; + p_adap->algo_data = iface; + p_adap->class = I2C_CLASS_ALL; + p_adap->dev.parent = &dev->dev; + + rc = request_irq(iface->irq, bfin_twi_interrupt_entry, + IRQF_DISABLED, dev->name, iface); + if (rc) { + dev_err(&(p_adap->dev), "i2c-bfin-twi: can't get IRQ %d !\n", + iface->irq); + return -ENODEV; + } + + /* Set TWI internal clock as 10MHz */ + bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + + /* Set Twi interface clock as specified */ + bfin_write_TWI_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ ) + << 8) | (( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ ) + & 0xFF)); + + /* Enable TWI */ + bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); + SSYNC(); + + rc = i2c_add_adapter(p_adap); + if (rc < 0) + free_irq(iface->irq, iface); + else + platform_set_drvdata(dev, iface); + + return rc; +} + +static int i2c_bfin_twi_remove(struct platform_device *pdev) +{ + struct bfin_twi_iface *iface = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + i2c_del_adapter(&(iface->adap)); + free_irq(iface->irq, iface); + + return 0; +} + +static struct platform_driver i2c_bfin_twi_driver = { + .probe = i2c_bfin_twi_probe, + .remove = i2c_bfin_twi_remove, + .suspend = i2c_bfin_twi_suspend, + .resume = i2c_bfin_twi_resume, + .driver = { + .name = "i2c-bfin-twi", + .owner = THIS_MODULE, + }, +}; + +static int __init i2c_bfin_twi_init(void) +{ + pr_info("I2C: Blackfin I2C TWI driver\n"); + + return platform_driver_register(&i2c_bfin_twi_driver); +} + +static void __exit i2c_bfin_twi_exit(void) +{ + platform_driver_unregister(&i2c_bfin_twi_driver); +} + +MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>"); +MODULE_DESCRIPTION("I2C-Bus adapter routines for Blackfin TWI"); +MODULE_LICENSE("GPL"); + +module_init(i2c_bfin_twi_init); +module_exit(i2c_bfin_twi_exit); diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 8349674..804f0a5 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -35,6 +35,7 @@ #include <linux/pci.h> #include <linux/wait.h> +#include <linux/isa.h> #include <linux/i2c.h> #include <linux/i2c-algo-pcf.h> @@ -207,7 +208,7 @@ static struct i2c_adapter pcf_isa_ops = { .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __devinit elektor_match(struct device *dev, unsigned int id) { #ifdef __alpha__ /* check to see we have memory mapped PCF8584 connected to the @@ -222,9 +223,8 @@ static int __init i2c_pcfisa_init(void) /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - pr_debug("%s: found cy82c693, config " - "register 0x47 = 0x%02x\n", - pcf_isa_ops.name, config); + dev_dbg(dev, "found cy82c693, config " + "register 0x47 = 0x%02x\n", config); /* UP2000 board has this register set to 0xe1, but the most significant bit as seems can be @@ -244,9 +244,9 @@ static int __init i2c_pcfisa_init(void) 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - pr_info("%s: found API UP2000 like " - "board, will probe PCF8584 " - "later\n", pcf_isa_ops.name); + dev_info(dev, "found API UP2000 like " + "board, will probe PCF8584 " + "later\n"); } } pci_dev_put(cy693_dev); @@ -256,22 +256,27 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "%s: incorrect base address (%#x) specified " - "for mmapped I/O\n", pcf_isa_ops.name, base); - return -ENODEV; + dev_err(dev, "incorrect base address (%#x) specified " + "for mmapped I/O\n", base); + return 0; } if (base == 0) { base = DEFAULT_BASE; } + return 1; +} +static int __devinit elektor_probe(struct device *dev, unsigned int id) +{ init_waitqueue_head(&pcf_wait); if (pcf_isa_init()) return -ENODEV; + pcf_isa_ops.dev.parent = dev; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); + dev_info(dev, "found device at %#x\n", base); return 0; @@ -291,7 +296,7 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; } -static void i2c_pcfisa_exit(void) +static int __devexit elektor_remove(struct device *dev, unsigned int id) { i2c_del_adapter(&pcf_isa_ops); @@ -307,6 +312,28 @@ static void i2c_pcfisa_exit(void) iounmap(base_iomem); release_mem_region(base, 2); } + + return 0; +} + +static struct isa_driver i2c_elektor_driver = { + .match = elektor_match, + .probe = elektor_probe, + .remove = __devexit_p(elektor_remove), + .driver = { + .owner = THIS_MODULE, + .name = "i2c-elektor", + }, +}; + +static int __init i2c_pcfisa_init(void) +{ + return isa_register_driver(&i2c_elektor_driver, 1); +} + +static void __exit i2c_pcfisa_exit(void) +{ + isa_unregister_driver(&i2c_elektor_driver); } MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c new file mode 100644 index 0000000..a7dd546 --- /dev/null +++ b/drivers/i2c/busses/i2c-gpio.c @@ -0,0 +1,215 @@ +/* + * Bitbanging I2C bus driver using the GPIO API + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c-gpio.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/gpio.h> + +/* Toggle SDA by changing the direction of the pin */ +static void i2c_gpio_setsda_dir(void *data, int state) +{ + struct i2c_gpio_platform_data *pdata = data; + + if (state) + gpio_direction_input(pdata->sda_pin); + else + gpio_direction_output(pdata->sda_pin, 0); +} + +/* + * Toggle SDA by changing the output value of the pin. This is only + * valid for pins configured as open drain (i.e. setting the value + * high effectively turns off the output driver.) + */ +static void i2c_gpio_setsda_val(void *data, int state) +{ + struct i2c_gpio_platform_data *pdata = data; + + gpio_set_value(pdata->sda_pin, state); +} + +/* Toggle SCL by changing the direction of the pin. */ +static void i2c_gpio_setscl_dir(void *data, int state) +{ + struct i2c_gpio_platform_data *pdata = data; + + if (state) + gpio_direction_input(pdata->scl_pin); + else + gpio_direction_output(pdata->scl_pin, 0); +} + +/* + * Toggle SCL by changing the output value of the pin. This is used + * for pins that are configured as open drain and for output-only + * pins. The latter case will break the i2c protocol, but it will + * often work in practice. + */ +static void i2c_gpio_setscl_val(void *data, int state) +{ + struct i2c_gpio_platform_data *pdata = data; + + gpio_set_value(pdata->scl_pin, state); +} + +int i2c_gpio_getsda(void *data) +{ + struct i2c_gpio_platform_data *pdata = data; + + return gpio_get_value(pdata->sda_pin); +} + +int i2c_gpio_getscl(void *data) +{ + struct i2c_gpio_platform_data *pdata = data; + + return gpio_get_value(pdata->scl_pin); +} + +static int __init i2c_gpio_probe(struct platform_device *pdev) +{ + struct i2c_gpio_platform_data *pdata; + struct i2c_algo_bit_data *bit_data; + struct i2c_adapter *adap; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENXIO; + + ret = -ENOMEM; + adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (!adap) + goto err_alloc_adap; + bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); + if (!bit_data) + goto err_alloc_bit_data; + + ret = gpio_request(pdata->sda_pin, "sda"); + if (ret) + goto err_request_sda; + ret = gpio_request(pdata->scl_pin, "scl"); + if (ret) + goto err_request_scl; + + if (pdata->sda_is_open_drain) { + gpio_direction_output(pdata->sda_pin, 1); + bit_data->setsda = i2c_gpio_setsda_val; + } else { + gpio_direction_input(pdata->sda_pin); + bit_data->setsda = i2c_gpio_setsda_dir; + } + + if (pdata->scl_is_open_drain || pdata->scl_is_output_only) { + gpio_direction_output(pdata->scl_pin, 1); + bit_data->setscl = i2c_gpio_setscl_val; + } else { + gpio_direction_input(pdata->scl_pin); + bit_data->setscl = i2c_gpio_setscl_dir; + } + + if (!pdata->scl_is_output_only) + bit_data->getscl = i2c_gpio_getscl; + bit_data->getsda = i2c_gpio_getsda; + + if (pdata->udelay) + bit_data->udelay = pdata->udelay; + else if (pdata->scl_is_output_only) + bit_data->udelay = 50; /* 10 kHz */ + else + bit_data->udelay = 5; /* 100 kHz */ + + if (pdata->timeout) + bit_data->timeout = pdata->timeout; + else + bit_data->timeout = HZ / 10; /* 100 ms */ + + bit_data->data = pdata; + + adap->owner = THIS_MODULE; + snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); + adap->algo_data = bit_data; + adap->dev.parent = &pdev->dev; + + ret = i2c_bit_add_bus(adap); + if (ret) + goto err_add_bus; + + platform_set_drvdata(pdev, adap); + + dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", + pdata->sda_pin, pdata->scl_pin, + pdata->scl_is_output_only + ? ", no clock stretching" : ""); + + return 0; + +err_add_bus: + gpio_free(pdata->scl_pin); +err_request_scl: + gpio_free(pdata->sda_pin); +err_request_sda: + kfree(bit_data); +err_alloc_bit_data: + kfree(adap); +err_alloc_adap: + return ret; +} + +static int __exit i2c_gpio_remove(struct platform_device *pdev) +{ + struct i2c_gpio_platform_data *pdata; + struct i2c_adapter *adap; + + adap = platform_get_drvdata(pdev); + pdata = pdev->dev.platform_data; + + i2c_del_adapter(adap); + gpio_free(pdata->scl_pin); + gpio_free(pdata->sda_pin); + kfree(adap->algo_data); + kfree(adap); + + return 0; +} + +static struct platform_driver i2c_gpio_driver = { + .driver = { + .name = "i2c-gpio", + .owner = THIS_MODULE, + }, + .remove = __exit_p(i2c_gpio_remove), +}; + +static int __init i2c_gpio_init(void) +{ + int ret; + + ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe); + if (ret) + printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret); + + return ret; +} +module_init(i2c_gpio_init); + +static void __exit i2c_gpio_exit(void) +{ + platform_driver_unregister(&i2c_gpio_driver); +} +module_exit(i2c_gpio_exit); + +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index a320e7d..611b571 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -527,7 +527,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id /* set up the sysfs linkage to our parent device */ i801_adapter.dev.parent = &dev->dev; - snprintf(i801_adapter.name, I2C_NAME_SIZE, + snprintf(i801_adapter.name, sizeof(i801_adapter.name), "SMBus I801 adapter at %04lx", i801_smba); err = i2c_add_adapter(&i801_adapter); if (err) { diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 5f33bc9..b0e1370 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -41,6 +41,10 @@ #include <linux/platform_device.h> #include <linux/completion.h> +/* Exported by i2c-core for i2c-isa only */ +extern void i2c_adapter_dev_release(struct device *dev); +extern struct class i2c_adapter_class; + static u32 isa_func(struct i2c_adapter *adapter); /* This is the actual algorithm we define */ @@ -64,16 +68,6 @@ static u32 isa_func(struct i2c_adapter *adapter) } -/* Copied from i2c-core */ -static ssize_t show_adapter_name(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct i2c_adapter *adap = dev_to_i2c_adapter(dev); - return sprintf(buf, "%s\n", adap->name); -} -static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); - - /* We implement an interface which resembles i2c_{add,del}_driver, but for i2c-isa drivers. We don't have to remember and handle lists of drivers and adapters so this is much more simple, of course. */ @@ -139,41 +133,18 @@ static int __init i2c_isa_init(void) isa_adapter.nr = ANY_I2C_ISA_BUS; isa_adapter.dev.parent = &platform_bus; sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr); - isa_adapter.dev.driver = &i2c_adapter_driver; isa_adapter.dev.release = &i2c_adapter_dev_release; + isa_adapter.dev.class = &i2c_adapter_class; err = device_register(&isa_adapter.dev); if (err) { printk(KERN_ERR "i2c-isa: Failed to register device\n"); goto exit; } - err = device_create_file(&isa_adapter.dev, &dev_attr_name); - if (err) { - printk(KERN_ERR "i2c-isa: Failed to create name file\n"); - goto exit_unregister; - } - - /* Add this adapter to the i2c_adapter class */ - memset(&isa_adapter.class_dev, 0x00, sizeof(struct class_device)); - isa_adapter.class_dev.dev = &isa_adapter.dev; - isa_adapter.class_dev.class = &i2c_adapter_class; - strlcpy(isa_adapter.class_dev.class_id, isa_adapter.dev.bus_id, - BUS_ID_SIZE); - err = class_device_register(&isa_adapter.class_dev); - if (err) { - printk(KERN_ERR "i2c-isa: Failed to register class device\n"); - goto exit_remove_name; - } dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name); return 0; -exit_remove_name: - device_remove_file(&isa_adapter.dev, &dev_attr_name); -exit_unregister: - init_completion(&isa_adapter.dev_released); /* Needed? */ - device_unregister(&isa_adapter.dev); - wait_for_completion(&isa_adapter.dev_released); exit: return err; } @@ -201,15 +172,11 @@ static void __exit i2c_isa_exit(void) /* Clean up the sysfs representation */ dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n"); init_completion(&isa_adapter.dev_released); - init_completion(&isa_adapter.class_dev_released); - class_device_unregister(&isa_adapter.class_dev); - device_remove_file(&isa_adapter.dev, &dev_attr_name); device_unregister(&isa_adapter.dev); /* Wait for sysfs to drop all references */ dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n"); wait_for_completion(&isa_adapter.dev_released); - wait_for_completion(&isa_adapter.class_dev_released); dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name); } diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index efa3ecc..6352121 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -118,7 +118,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) drv_data->adapter.id = I2C_HW_B_IXP2000, strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, - I2C_NAME_SIZE); + sizeof(drv_data->adapter.name)); drv_data->adapter.algo_data = &drv_data->algo_data, drv_data->adapter.dev.parent = &plat_dev->dev; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 08e89b8..069ed7f 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -127,7 +127,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) drv_data->adapter.id = I2C_HW_B_IXP4XX; drv_data->adapter.class = I2C_CLASS_HWMON; strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, - I2C_NAME_SIZE); + sizeof(drv_data->adapter.name)); drv_data->adapter.algo_data = &drv_data->algo_data; drv_data->adapter.dev.parent = &plat_dev->dev; diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index ee65aa1..c6b6898 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/sched.h> #include <linux/init.h> -#include <linux/pci.h> #include <linux/platform_device.h> #include <asm/io.h> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index a3283b9..a55b333 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -508,7 +508,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) } strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter", - I2C_NAME_SIZE); + sizeof(drv_data->adapter.name)); init_waitqueue_head(&drv_data->waitq); spin_lock_init(&drv_data->lock); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 1514ec5..3cd0d63 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -33,6 +33,8 @@ nForce4 MCP-04 0034 nForce4 MCP51 0264 nForce4 MCP55 0368 + nForce MCP61 03EB + nForce MCP65 0446 This driver supports the 2 SMBuses that are included in the MCP of the nForce2/3/4/5xx chipsets. @@ -200,6 +202,8 @@ static struct pci_device_id nforce2_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS) }, { 0 } }; @@ -240,7 +244,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; smbus->adapter.dev.parent = &dev->dev; - snprintf(smbus->adapter.name, I2C_NAME_SIZE, + snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus nForce2 adapter at %04x", smbus->base); error = i2c_add_adapter(&smbus->adapter); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index bcd8367..e471e3b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -605,7 +605,8 @@ omap_i2c_probe(struct platform_device *pdev) adap->dev.parent = &pdev->dev; /* i2c device drivers may be active on return from add_adapter() */ - r = i2c_add_adapter(adap); + adap->nr = pdev->id; + r = i2c_add_numbered_adapter(adap); if (r) { dev_err(dev->dev, "failure adding adapter\n"); goto err_free_irq; diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 4bc4281..49a95e2 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * - * i2c-parport.c I2C bus over parallel port * + * i2c-parport-light.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org> Based on older i2c-velleman.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> @@ -34,6 +35,9 @@ #include "i2c-parport.h" #define DEFAULT_BASE 0x378 +#define DRVNAME "i2c-parport-light" + +static struct platform_device *pdev; static u16 base; module_param(base, ushort, 0); @@ -106,7 +110,7 @@ static struct i2c_algo_bit_data parport_algo_data = { .timeout = HZ, }; -/* ----- I2c structure ---------------------------------------------------- */ +/* ----- Driver registration ---------------------------------------------- */ static struct i2c_adapter parport_adapter = { .owner = THIS_MODULE, @@ -116,55 +120,141 @@ static struct i2c_adapter parport_adapter = { .name = "Parallel port adapter (light)", }; -/* ----- Module loading, unloading and information ------------------------ */ +static int __devinit i2c_parport_probe(struct platform_device *pdev) +{ + int err; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) + return -EBUSY; + + /* Reset hardware to a sane state (SCL and SDA high) */ + parport_setsda(NULL, 1); + parport_setscl(NULL, 1); + /* Other init if needed (power on...) */ + if (adapter_parm[type].init.val) + line_set(1, &adapter_parm[type].init); + + parport_adapter.dev.parent = &pdev->dev; + err = i2c_bit_add_bus(&parport_adapter); + if (err) { + dev_err(&pdev->dev, "Unable to register with I2C\n"); + goto exit_region; + } + return 0; + +exit_region: + release_region(res->start, res->end - res->start + 1); + return err; +} + +static int __devexit i2c_parport_remove(struct platform_device *pdev) +{ + struct resource *res; + + i2c_del_adapter(&parport_adapter); + + /* Un-init if needed (power off...) */ + if (adapter_parm[type].init.val) + line_set(0, &adapter_parm[type].init); + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + release_region(res->start, res->end - res->start + 1); + return 0; +} + +static struct platform_driver i2c_parport_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = i2c_parport_probe, + .remove = __devexit_p(i2c_parport_remove), +}; + +static int __init i2c_parport_device_add(u16 address) +{ + struct resource res = { + .start = address, + .end = address + 2, + .name = DRVNAME, + .flags = IORESOURCE_IO, + }; + int err; + + pdev = platform_device_alloc(DRVNAME, -1); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit; + } + + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + printk(KERN_ERR DRVNAME ": Device resource addition failed " + "(%d)\n", err); + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} static int __init i2c_parport_init(void) { + int err; + if (type < 0) { - printk(KERN_WARNING "i2c-parport: adapter type unspecified\n"); + printk(KERN_ERR DRVNAME ": adapter type unspecified\n"); return -ENODEV; } if (type >= ARRAY_SIZE(adapter_parm)) { - printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type); + printk(KERN_ERR DRVNAME ": invalid type (%d)\n", type); return -ENODEV; } if (base == 0) { - printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE); + pr_info(DRVNAME ": using default base 0x%x\n", DEFAULT_BASE); base = DEFAULT_BASE; } - if (!request_region(base, 3, "i2c-parport")) - return -ENODEV; - if (!adapter_parm[type].getscl.val) parport_algo_data.getscl = NULL; - /* Reset hardware to a sane state (SCL and SDA high) */ - parport_setsda(NULL, 1); - parport_setscl(NULL, 1); - /* Other init if needed (power on...) */ - if (adapter_parm[type].init.val) - line_set(1, &adapter_parm[type].init); + /* Sets global pdev as a side effect */ + err = i2c_parport_device_add(base); + if (err) + goto exit; - if (i2c_bit_add_bus(&parport_adapter) < 0) { - printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); - release_region(base, 3); - return -ENODEV; - } + err = platform_driver_register(&i2c_parport_driver); + if (err) + goto exit_device; return 0; + +exit_device: + platform_device_unregister(pdev); +exit: + return err; } static void __exit i2c_parport_exit(void) { - /* Un-init if needed (power off...) */ - if (adapter_parm[type].init.val) - line_set(0, &adapter_parm[type].init); - - i2c_del_adapter(&parport_adapter); - release_region(base, 3); + platform_driver_unregister(&i2c_parport_driver); + platform_device_unregister(pdev); } MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 66696a4..8c95370 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org> Based on older i2c-philips-par.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -137,19 +137,12 @@ static struct i2c_algo_bit_data parport_algo_data = { .setscl = parport_setscl, .getsda = parport_getsda, .getscl = parport_getscl, - .udelay = 60, + .udelay = 10, /* ~50 kbps */ .timeout = HZ, }; /* ----- I2c and parallel port call-back functions and structures --------- */ -static struct i2c_adapter parport_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, - .id = I2C_HW_B_LP, - .name = "Parallel port adapter", -}; - static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; @@ -169,10 +162,17 @@ static void i2c_parport_attach (struct parport *port) } /* Fill the rest of the structure */ - adapter->adapter = parport_adapter; + adapter->adapter.owner = THIS_MODULE; + adapter->adapter.class = I2C_CLASS_HWMON; + adapter->adapter.id = I2C_HW_B_LP; + strlcpy(adapter->adapter.name, "Parallel port adapter", + sizeof(adapter->adapter.name)); adapter->algo_data = parport_algo_data; - if (!adapter_parm[type].getscl.val) + /* Slow down if we can't sense SCL */ + if (!adapter_parm[type].getscl.val) { adapter->algo_data.getscl = NULL; + adapter->algo_data.udelay = 50; /* ~10 kbps */ + } adapter->algo_data.data = port; adapter->adapter.algo_data = &adapter->algo_data; @@ -214,11 +214,12 @@ static void i2c_parport_detach (struct parport *port) for (prev = NULL, adapter = adapter_list; adapter; prev = adapter, adapter = adapter->next) { if (adapter->pdev->port == port) { + i2c_del_adapter(&adapter->adapter); + /* Un-init if needed (power off...) */ if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); - i2c_del_adapter(&adapter->adapter); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index bf89eee..58e3271 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -358,7 +358,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev, } smbus->adapter.owner = THIS_MODULE; - snprintf(smbus->adapter.name, I2C_NAME_SIZE, + snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "PA Semi SMBus adapter at 0x%lx", smbus->base); smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index cc6536a..5161aaf 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -25,9 +25,9 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/pci.h> #include <linux/wait.h> +#include <linux/isa.h> #include <linux/i2c.h> #include <linux/i2c-algo-pca.h> @@ -119,27 +119,26 @@ static struct i2c_adapter pca_isa_ops = { .name = "PCA9564 ISA Adapter", }; -static int __init pca_isa_init(void) +static int __devinit pca_isa_probe(struct device *dev, unsigned int id) { - init_waitqueue_head(&pca_wait); - printk(KERN_INFO "i2c-pca-isa: i/o base %#08lx. irq %d\n", base, irq); + dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq); if (!request_region(base, IO_SIZE, "i2c-pca-isa")) { - printk(KERN_ERR "i2c-pca-isa: I/O address %#08lx is in use.\n", base); + dev_err(dev, "I/O address %#08lx is in use\n", base); goto out; } if (irq > -1) { if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) { - printk(KERN_ERR "i2c-pca-isa: Request irq%d failed\n", irq); + dev_err(dev, "Request irq%d failed\n", irq); goto out_region; } } if (i2c_pca_add_bus(&pca_isa_ops) < 0) { - printk(KERN_ERR "i2c-pca-isa: Failed to add i2c bus\n"); + dev_err(dev, "Failed to add i2c bus\n"); goto out_irq; } @@ -154,7 +153,7 @@ static int __init pca_isa_init(void) return -ENODEV; } -static void pca_isa_exit(void) +static int __devexit pca_isa_remove(struct device *dev, unsigned int id) { i2c_del_adapter(&pca_isa_ops); @@ -163,6 +162,27 @@ static void pca_isa_exit(void) free_irq(irq, &pca_isa_ops); } release_region(base, IO_SIZE); + + return 0; +} + +static struct isa_driver pca_isa_driver = { + .probe = pca_isa_probe, + .remove = __devexit_p(pca_isa_remove), + .driver = { + .owner = THIS_MODULE, + .name = "i2c-pca-isa", + } +}; + +static int __init pca_isa_init(void) +{ + return isa_register_driver(&pca_isa_driver, 1); +} + +static void __exit pca_isa_exit(void) +{ + isa_unregister_driver(&pca_isa_driver); } MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 21b1809..5a52bf5e 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -428,7 +428,7 @@ static int __devinit piix4_probe(struct pci_dev *dev, /* set up the sysfs linkage to our parent device */ piix4_adapter.dev.parent = &dev->dev; - snprintf(piix4_adapter.name, I2C_NAME_SIZE, + snprintf(piix4_adapter.name, sizeof(piix4_adapter.name), "SMBus PIIX4 adapter at %04x", piix4_smba); if ((retval = i2c_add_adapter(&piix4_adapter))) { diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 4443d3b..873544a 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -539,6 +539,18 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) writel(icr | ICR_START | ICR_TB, _ICR(i2c)); } +static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) +{ + u32 icr; + + /* + * Clear the STOP and ACK flags + */ + icr = readl(_ICR(i2c)); + icr &= ~(ICR_STOP | ICR_ACKNAK); + writel(icr, _IRC(i2c)); +} + /* * We are protected by the adapter bus mutex. */ @@ -581,6 +593,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) * The rest of the processing occurs in the interrupt handler. */ timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); + i2c_pxa_stop_message(i2c); /* * We place the return code in i2c->msg_idx. @@ -825,7 +838,7 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { }; static struct pxa_i2c i2c_pxa = { - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(i2c_pxa.lock), .adap = { .owner = THIS_MODULE, .algo = &i2c_pxa_algorithm, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 556f244..e68a96f 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -61,6 +61,8 @@ struct s3c24xx_i2c { unsigned int msg_idx; unsigned int msg_ptr; + unsigned int tx_setup; + enum s3c24xx_i2c_state state; void __iomem *regs; @@ -199,8 +201,11 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); writeb(addr, i2c->regs + S3C2410_IICDS); - // delay a bit and reset iiccon before setting start (per samsung) - udelay(1); + /* delay here to ensure the data byte has gotten onto the bus + * before the transaction is started */ + + ndelay(i2c->tx_setup); + dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); writel(iiccon, i2c->regs + S3C2410_IICCON); @@ -322,7 +327,15 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); - + + /* delay after writing the byte to allow the + * data setup time on the bus, as writing the + * data to the register causes the first bit + * to appear on SDA, and SCL will change as + * soon as the interrupt is acknowledged */ + + ndelay(i2c->tx_setup); + } else if (!is_lastmsg(i2c)) { /* we need to go to the next i2c message */ @@ -570,9 +583,10 @@ static const struct i2c_algorithm s3c24xx_i2c_algorithm = { }; static struct s3c24xx_i2c s3c24xx_i2c = { - .lock = SPIN_LOCK_UNLOCKED, - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait), - .adap = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock), + .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait), + .tx_setup = 50, + .adap = { .name = "s3c2410-i2c", .owner = THIS_MODULE, .algo = &s3c24xx_i2c_algorithm, @@ -731,26 +745,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) return 0; } -static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c) -{ - if (i2c->clk != NULL && !IS_ERR(i2c->clk)) { - clk_disable(i2c->clk); - clk_put(i2c->clk); - i2c->clk = NULL; - } - - if (i2c->regs != NULL) { - iounmap(i2c->regs); - i2c->regs = NULL; - } - - if (i2c->ioarea != NULL) { - release_resource(i2c->ioarea); - kfree(i2c->ioarea); - i2c->ioarea = NULL; - } -} - /* s3c24xx_i2c_probe * * called by the bus driver when a suitable device is found @@ -769,7 +763,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (IS_ERR(i2c->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); ret = -ENOENT; - goto out; + goto err_noclk; } dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); @@ -782,7 +776,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "cannot find IO resource\n"); ret = -ENOENT; - goto out; + goto err_clk; } i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1, @@ -791,7 +785,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (i2c->ioarea == NULL) { dev_err(&pdev->dev, "cannot request IO\n"); ret = -ENXIO; - goto out; + goto err_clk; } i2c->regs = ioremap(res->start, (res->end-res->start)+1); @@ -799,7 +793,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (i2c->regs == NULL) { dev_err(&pdev->dev, "cannot map IO\n"); ret = -ENXIO; - goto out; + goto err_ioarea; } dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res); @@ -813,7 +807,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret = s3c24xx_i2c_init(i2c); if (ret != 0) - goto out; + goto err_iomap; /* find the IRQ for this unit (note, this relies on the init call to * ensure no current IRQs pending @@ -823,7 +817,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "cannot find IRQ\n"); ret = -ENOENT; - goto out; + goto err_iomap; } ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED, @@ -831,7 +825,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "cannot claim IRQ\n"); - goto out; + goto err_iomap; } i2c->irq = res; @@ -841,17 +835,29 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); - goto out; + goto err_irq; } platform_set_drvdata(pdev, i2c); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); + return 0; - out: - if (ret < 0) - s3c24xx_i2c_free(i2c); + err_irq: + free_irq(i2c->irq->start, i2c); + + err_iomap: + iounmap(i2c->regs); + err_ioarea: + release_resource(i2c->ioarea); + kfree(i2c->ioarea); + + err_clk: + clk_disable(i2c->clk); + clk_put(i2c->clk); + + err_noclk: return ret; } @@ -863,11 +869,17 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); - - if (i2c != NULL) { - s3c24xx_i2c_free(i2c); - platform_set_drvdata(pdev, NULL); - } + + i2c_del_adapter(&i2c->adap); + free_irq(i2c->irq->start, i2c); + + clk_disable(i2c->clk); + clk_put(i2c->clk); + + iounmap(i2c->regs); + + release_resource(i2c->ioarea); + kfree(i2c->ioarea); return 0; } diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c new file mode 100644 index 0000000..10af8d3 --- /dev/null +++ b/drivers/i2c/busses/i2c-simtec.c @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Simtec Generic I2C Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> + +#include <asm/io.h> + +struct simtec_i2c_data { + struct resource *ioarea; + void __iomem *reg; + struct i2c_adapter adap; + struct i2c_algo_bit_data bit; +}; + +#define CMD_SET_SDA (1<<2) +#define CMD_SET_SCL (1<<3) + +#define STATE_SDA (1<<0) +#define STATE_SCL (1<<1) + +/* i2c bit-bus functions */ + +static void simtec_i2c_setsda(void *pw, int state) +{ + struct simtec_i2c_data *pd = pw; + writeb(CMD_SET_SDA | (state ? STATE_SDA : 0), pd->reg); +} + +static void simtec_i2c_setscl(void *pw, int state) +{ + struct simtec_i2c_data *pd = pw; + writeb(CMD_SET_SCL | (state ? STATE_SCL : 0), pd->reg); +} + +static int simtec_i2c_getsda(void *pw) +{ + struct simtec_i2c_data *pd = pw; + return readb(pd->reg) & STATE_SDA ? 1 : 0; +} + +static int simtec_i2c_getscl(void *pw) +{ + struct simtec_i2c_data *pd = pw; + return readb(pd->reg) & STATE_SCL ? 1 : 0; +} + +/* device registration */ + +static int simtec_i2c_probe(struct platform_device *dev) +{ + struct simtec_i2c_data *pd; + struct resource *res; + int size; + int ret; + + pd = kzalloc(sizeof(struct simtec_i2c_data), GFP_KERNEL); + if (pd == NULL) { + dev_err(&dev->dev, "cannot allocate private data\n"); + return -ENOMEM; + } + + platform_set_drvdata(dev, pd); + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&dev->dev, "cannot find IO resource\n"); + ret = -ENOENT; + goto err; + } + + size = (res->end-res->start)+1; + + pd->ioarea = request_mem_region(res->start, size, dev->name); + if (pd->ioarea == NULL) { + dev_err(&dev->dev, "cannot request IO\n"); + ret = -ENXIO; + goto err; + } + + pd->reg = ioremap(res->start, size); + if (pd->reg == NULL) { + dev_err(&dev->dev, "cannot map IO\n"); + ret = -ENXIO; + goto err_res; + } + + /* setup the private data */ + + pd->adap.owner = THIS_MODULE; + pd->adap.algo_data = &pd->bit; + pd->adap.dev.parent = &dev->dev; + + strlcpy(pd->adap.name, "Simtec I2C", sizeof(pd->adap.name)); + + pd->bit.data = pd; + pd->bit.setsda = simtec_i2c_setsda; + pd->bit.setscl = simtec_i2c_setscl; + pd->bit.getsda = simtec_i2c_getsda; + pd->bit.getscl = simtec_i2c_getscl; + pd->bit.timeout = HZ; + pd->bit.udelay = 20; + + ret = i2c_bit_add_bus(&pd->adap); + if (ret) + goto err_all; + + return 0; + + err_all: + iounmap(pd->reg); + + err_res: + release_resource(pd->ioarea); + kfree(pd->ioarea); + + err: + kfree(pd); + return ret; +} + +static int simtec_i2c_remove(struct platform_device *dev) +{ + struct simtec_i2c_data *pd = platform_get_drvdata(dev); + + i2c_del_adapter(&pd->adap); + + iounmap(pd->reg); + release_resource(pd->ioarea); + kfree(pd->ioarea); + kfree(pd); + + return 0; +} + + +/* device driver */ + +static struct platform_driver simtec_i2c_driver = { + .driver = { + .name = "simtec-i2c", + .owner = THIS_MODULE, + }, + .probe = simtec_i2c_probe, + .remove = simtec_i2c_remove, +}; + +static int __init i2c_adap_simtec_init(void) +{ + return platform_driver_register(&simtec_i2c_driver); +} + +static void __exit i2c_adap_simtec_exit(void) +{ + platform_driver_unregister(&simtec_i2c_driver); +} + +module_init(i2c_adap_simtec_init); +module_exit(i2c_adap_simtec_exit); + +MODULE_DESCRIPTION("Simtec Generic I2C Bus driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 4157b0c..dc235bb 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -300,7 +300,7 @@ static int __devinit sis96x_probe(struct pci_dev *dev, /* set up the sysfs linkage to our parent device */ sis96x_adapter.dev.parent = &dev->dev; - snprintf(sis96x_adapter.name, I2C_NAME_SIZE, + snprintf(sis96x_adapter.name, sizeof(sis96x_adapter.name), "SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base); if ((retval = i2c_add_adapter(&sis96x_adapter))) { diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c new file mode 100644 index 0000000..9079990 --- /dev/null +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -0,0 +1,277 @@ +/* + * driver for the i2c-tiny-usb adapter - 1.0 + * http://www.harbaum.org/till/i2c_tiny_usb + * + * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> + +/* include interfaces to usb layer */ +#include <linux/usb.h> + +/* include interface to i2c layer */ +#include <linux/i2c.h> + +/* commands via USB, must match command ids in the firmware */ +#define CMD_ECHO 0 +#define CMD_GET_FUNC 1 +#define CMD_SET_DELAY 2 +#define CMD_GET_STATUS 3 + +#define CMD_I2C_IO 4 +#define CMD_I2C_IO_BEGIN (1<<0) +#define CMD_I2C_IO_END (1<<1) + +/* i2c bit delay, default is 10us -> 100kHz */ +static int delay = 10; +module_param(delay, int, 0); +MODULE_PARM_DESC(delay, "bit delay in microseconds, " + "e.g. 10 for 100kHz (default is 100kHz)"); + +static int usb_read(struct i2c_adapter *adapter, int cmd, + int value, int index, void *data, int len); + +static int usb_write(struct i2c_adapter *adapter, int cmd, + int value, int index, void *data, int len); + +/* ----- begin of i2c layer ---------------------------------------------- */ + +#define STATUS_IDLE 0 +#define STATUS_ADDRESS_ACK 1 +#define STATUS_ADDRESS_NAK 2 + +static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + unsigned char status; + struct i2c_msg *pmsg; + int i; + + dev_dbg(&adapter->dev, "master xfer %d messages:\n", num); + + for (i = 0 ; i < num ; i++) { + int cmd = CMD_I2C_IO; + + if (i == 0) + cmd |= CMD_I2C_IO_BEGIN; + + if (i == num-1) + cmd |= CMD_I2C_IO_END; + + pmsg = &msgs[i]; + + dev_dbg(&adapter->dev, + " %d: %s (flags %d) %d bytes to 0x%02x\n", + i, pmsg->flags & I2C_M_RD ? "read" : "write", + pmsg->flags, pmsg->len, pmsg->addr); + + /* and directly send the message */ + if (pmsg->flags & I2C_M_RD) { + /* read data */ + if (usb_read(adapter, cmd, + pmsg->flags, pmsg->addr, + pmsg->buf, pmsg->len) != pmsg->len) { + dev_err(&adapter->dev, + "failure reading data\n"); + return -EREMOTEIO; + } + } else { + /* write data */ + if (usb_write(adapter, cmd, + pmsg->flags, pmsg->addr, + pmsg->buf, pmsg->len) != pmsg->len) { + dev_err(&adapter->dev, + "failure writing data\n"); + return -EREMOTEIO; + } + } + + /* read status */ + if (usb_read(adapter, CMD_GET_STATUS, 0, 0, &status, 1) != 1) { + dev_err(&adapter->dev, "failure reading status\n"); + return -EREMOTEIO; + } + + dev_dbg(&adapter->dev, " status = %d\n", status); + if (status == STATUS_ADDRESS_NAK) + return -EREMOTEIO; + } + + return i; +} + +static u32 usb_func(struct i2c_adapter *adapter) +{ + u32 func; + + /* get functionality from adapter */ + if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) != + sizeof(func)) { + dev_err(&adapter->dev, "failure reading functionality\n"); + return 0; + } + + return func; +} + +/* This is the actual algorithm we define */ +static const struct i2c_algorithm usb_algorithm = { + .master_xfer = usb_xfer, + .functionality = usb_func, +}; + +/* ----- end of i2c layer ------------------------------------------------ */ + +/* ----- begin of usb layer ---------------------------------------------- */ + +/* The usb i2c interface uses a vid/pid pair donated by */ +/* Future Technology Devices International Ltd. */ +static struct usb_device_id i2c_tiny_usb_table [] = { + { USB_DEVICE(0x0403, 0xc631) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table); + +/* Structure to hold all of our device specific stuff */ +struct i2c_tiny_usb { + struct usb_device *usb_dev; /* the usb device for this device */ + struct usb_interface *interface; /* the interface for this device */ + struct i2c_adapter adapter; /* i2c related things */ +}; + +static int usb_read(struct i2c_adapter *adapter, int cmd, + int value, int index, void *data, int len) +{ + struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data; + + /* do control transfer */ + return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0), + cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | + USB_DIR_IN, value, index, data, len, 2000); +} + +static int usb_write(struct i2c_adapter *adapter, int cmd, + int value, int index, void *data, int len) +{ + struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data; + + /* do control transfer */ + return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0), + cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + value, index, data, len, 2000); +} + +static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev) +{ + usb_put_dev(dev->usb_dev); + kfree(dev); +} + +static int i2c_tiny_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct i2c_tiny_usb *dev; + int retval = -ENOMEM; + u16 version; + + dev_dbg(&interface->dev, "probing usb device\n"); + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "Out of memory\n"); + goto error; + } + + dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + version = le16_to_cpu(dev->usb_dev->descriptor.bcdDevice); + dev_info(&interface->dev, + "version %x.%02x found at bus %03d address %03d\n", + version >> 8, version & 0xff, + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + /* setup i2c adapter description */ + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &usb_algorithm; + dev->adapter.algo_data = dev; + snprintf(dev->adapter.name, I2C_NAME_SIZE, + "i2c-tiny-usb at bus %03d device %03d", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + if (usb_write(&dev->adapter, CMD_SET_DELAY, + cpu_to_le16(delay), 0, NULL, 0) != 0) { + dev_err(&dev->adapter.dev, + "failure setting delay to %dus\n", delay); + retval = -EIO; + goto error; + } + + dev->adapter.dev.parent = &dev->interface->dev; + + /* and finally attach to i2c layer */ + i2c_add_adapter(&dev->adapter); + + /* inform user about successful attachment to i2c layer */ + dev_info(&dev->adapter.dev, "connected i2c-tiny-usb device\n"); + + return 0; + + error: + if (dev) + i2c_tiny_usb_free(dev); + + return retval; +} + +static void i2c_tiny_usb_disconnect(struct usb_interface *interface) +{ + struct i2c_tiny_usb *dev = usb_get_intfdata(interface); + + i2c_del_adapter(&dev->adapter); + usb_set_intfdata(interface, NULL); + i2c_tiny_usb_free(dev); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver i2c_tiny_usb_driver = { + .name = "i2c-tiny-usb", + .probe = i2c_tiny_usb_probe, + .disconnect = i2c_tiny_usb_disconnect, + .id_table = i2c_tiny_usb_table, +}; + +static int __init usb_i2c_tiny_usb_init(void) +{ + /* register this driver with the USB subsystem */ + return usb_register(&i2c_tiny_usb_driver); +} + +static void __exit usb_i2c_tiny_usb_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&i2c_tiny_usb_driver); +} + +module_init(usb_i2c_tiny_usb_init); +module_exit(usb_i2c_tiny_usb_exit); + +/* ----- end of usb layer ------------------------------------------------ */ + +MODULE_AUTHOR("Till Harbaum <Till@Harbaum.org>"); +MODULE_DESCRIPTION("i2c-tiny-usb driver v1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 03c5fc8..7a2bc06 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -404,7 +404,7 @@ found: } vt596_adapter.dev.parent = &pdev->dev; - snprintf(vt596_adapter.name, I2C_NAME_SIZE, + snprintf(vt596_adapter.name, sizeof(vt596_adapter.name), "SMBus Via Pro adapter at %04x", vt596_smba); vt596_pdev = pci_dev_get(pdev); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 0b082c5..0db56e7 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -441,7 +441,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); - snprintf(adapter->name, I2C_NAME_SIZE, "%s ACB%d", text, index); + snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index); adapter->owner = THIS_MODULE; adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; @@ -599,6 +599,7 @@ static __init int scx200_scan_pci(void) else { int i; + pci_dev_put(pdev); for (i = 0; i < MAX_DEVICES; ++i) { if (base[i] == 0) continue; diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 87ee3ce..ea085a0 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -3,11 +3,10 @@ # menu "Miscellaneous I2C Chip support" - depends on I2C config SENSORS_DS1337 tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1337 and DS1339 real-time clock chips. @@ -17,7 +16,7 @@ config SENSORS_DS1337 config SENSORS_DS1374 tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for Dallas Semiconductor DS1374 real-time clock chips. @@ -27,7 +26,7 @@ config SENSORS_DS1374 config SENSORS_EEPROM tristate "EEPROM reader" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get read-only access to the EEPROM data available on modern memory DIMMs and Sony Vaio laptops. Such @@ -38,7 +37,7 @@ config SENSORS_EEPROM config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL default n help If you say yes here you get support for Philips PCF8574 and @@ -52,7 +51,7 @@ config SENSORS_PCF8574 config SENSORS_PCA9539 tristate "Philips PCA9539 16-bit I/O port" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for the Philips PCA9539 16-bit I/O port. @@ -62,7 +61,7 @@ config SENSORS_PCA9539 config SENSORS_PCF8591 tristate "Philips PCF8591" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL default n help If you say yes here you get support for Philips PCF8591 chips. @@ -75,7 +74,7 @@ config SENSORS_PCF8591 config ISP1301_OMAP tristate "Philips ISP1301 with OMAP OTG" - depends on I2C && ARCH_OMAP_OTG + depends on ARCH_OMAP_OTG help If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. @@ -90,7 +89,7 @@ config ISP1301_OMAP # and having mostly OMAP-specific board support config TPS65010 tristate "TPS6501x Power Management chips" - depends on I2C && ARCH_OMAP + depends on ARCH_OMAP default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of @@ -103,7 +102,7 @@ config TPS65010 config SENSORS_M41T00 tristate "ST M41T00 RTC chip" - depends on I2C && PPC32 + depends on PPC32 help If you say yes here you get support for the ST M41T00 RTC chip. @@ -112,7 +111,7 @@ config SENSORS_M41T00 config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" - depends on I2C && EXPERIMENTAL + depends on EXPERIMENTAL help If you say yes here you get support for the Maxim MAX6875 EEPROM-programmable, quad power-supply sequencer/supervisor. diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c new file mode 100644 index 0000000..ffb35f0 --- /dev/null +++ b/drivers/i2c/i2c-boardinfo.c @@ -0,0 +1,90 @@ +/* + * i2c-boardinfo.h - collect pre-declarations of I2C devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/i2c.h> + +#include "i2c-core.h" + + +/* These symbols are exported ONLY FOR the i2c core. + * No other users will be supported. + */ +DEFINE_MUTEX(__i2c_board_lock); +EXPORT_SYMBOL_GPL(__i2c_board_lock); + +LIST_HEAD(__i2c_board_list); +EXPORT_SYMBOL_GPL(__i2c_board_list); + +int __i2c_first_dynamic_bus_num; +EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num); + + +/** + * i2c_register_board_info - statically declare I2C devices + * @busnum: identifies the bus to which these devices belong + * @info: vector of i2c device descriptors + * @len: how many descriptors in the vector; may be zero to reserve + * the specified bus number. + * + * Systems using the Linux I2C driver stack can declare tables of board info + * while they initialize. This should be done in board-specific init code + * near arch_initcall() time, or equivalent, before any I2C adapter driver is + * registered. For example, mainboard init code could define several devices, + * as could the init code for each daughtercard in a board stack. + * + * The I2C devices will be created later, after the adapter for the relevant + * bus has been registered. After that moment, standard driver model tools + * are used to bind "new style" I2C drivers to the devices. The bus number + * for any device declared using this routine is not available for dynamic + * allocation. + * + * The board info passed can safely be __initdata, but be careful of embedded + * pointers (for platform_data, functions, etc) since that won't be copied. + */ +int __init +i2c_register_board_info(int busnum, + struct i2c_board_info const *info, unsigned len) +{ + int status; + + mutex_lock(&__i2c_board_lock); + + /* dynamic bus numbers will be assigned after the last static one */ + if (busnum >= __i2c_first_dynamic_bus_num) + __i2c_first_dynamic_bus_num = busnum + 1; + + for (status = 0; len; len--, info++) { + struct i2c_devinfo *devinfo; + + devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL); + if (!devinfo) { + pr_debug("i2c-core: can't register boardinfo!\n"); + status = -ENOMEM; + break; + } + + devinfo->busnum = busnum; + devinfo->board_info = *info; + list_add_tail(&devinfo->list, &__i2c_board_list); + } + + mutex_unlock(&__i2c_board_lock); + + return status; +} diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 21fe140..64f8e56 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -35,29 +35,92 @@ #include <linux/completion.h> #include <asm/uaccess.h> +#include "i2c-core.h" + static LIST_HEAD(adapters); static LIST_HEAD(drivers); static DEFINE_MUTEX(core_lists); static DEFINE_IDR(i2c_adapter_idr); +#define is_newstyle_driver(d) ((d)->probe || (d)->remove) /* ------------------------------------------------------------------------- */ -/* match always succeeds, as we want the probe() to tell if we really accept this match */ static int i2c_device_match(struct device *dev, struct device_driver *drv) { - return 1; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_driver *driver = to_i2c_driver(drv); + + /* make legacy i2c drivers bypass driver model probing entirely; + * such drivers scan each i2c adapter/bus themselves. + */ + if (!is_newstyle_driver(driver)) + return 0; + + /* new style drivers use the same kind of driver matching policy + * as platform devices or SPI: compare device and driver IDs. + */ + return strcmp(client->driver_name, drv->name) == 0; +} + +#ifdef CONFIG_HOTPLUG + +/* uevent helps with hotplug: modprobe -q $(MODALIAS) */ +static int i2c_device_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + struct i2c_client *client = to_i2c_client(dev); + int i = 0, length = 0; + + /* by definition, legacy drivers can't hotplug */ + if (dev->driver || !client->driver_name) + return 0; + + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, + "MODALIAS=%s", client->driver_name)) + return -ENOMEM; + envp[i] = NULL; + dev_dbg(dev, "uevent\n"); + return 0; } +#else +#define i2c_device_uevent NULL +#endif /* CONFIG_HOTPLUG */ + static int i2c_device_probe(struct device *dev) { - return -ENODEV; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_driver *driver = to_i2c_driver(dev->driver); + + if (!driver->probe) + return -ENODEV; + client->driver = driver; + dev_dbg(dev, "probe\n"); + return driver->probe(client); } static int i2c_device_remove(struct device *dev) { - return 0; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_driver *driver; + int status; + + if (!dev->driver) + return 0; + + driver = to_i2c_driver(dev->driver); + if (driver->remove) { + dev_dbg(dev, "remove\n"); + status = driver->remove(client); + } else { + dev->driver = NULL; + status = 0; + } + if (status == 0) + client->driver = NULL; + return status; } static void i2c_device_shutdown(struct device *dev) @@ -95,122 +158,184 @@ static int i2c_device_resume(struct device * dev) return driver->resume(to_i2c_client(dev)); } +static void i2c_client_release(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + complete(&client->released); +} + +static void i2c_client_dev_release(struct device *dev) +{ + kfree(to_i2c_client(dev)); +} + +static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%s\n", client->name); +} + +static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + return client->driver_name + ? sprintf(buf, "%s\n", client->driver_name) + : 0; +} + +static struct device_attribute i2c_dev_attrs[] = { + __ATTR(name, S_IRUGO, show_client_name, NULL), + /* modalias helps coldplug: modprobe $(cat .../modalias) */ + __ATTR(modalias, S_IRUGO, show_modalias, NULL), + { }, +}; + struct bus_type i2c_bus_type = { .name = "i2c", + .dev_attrs = i2c_dev_attrs, .match = i2c_device_match, + .uevent = i2c_device_uevent, .probe = i2c_device_probe, .remove = i2c_device_remove, .shutdown = i2c_device_shutdown, .suspend = i2c_device_suspend, .resume = i2c_device_resume, }; +EXPORT_SYMBOL_GPL(i2c_bus_type); -/* ------------------------------------------------------------------------- */ +/** + * i2c_new_device - instantiate an i2c device for use with a new style driver + * @adap: the adapter managing the device + * @info: describes one I2C device; bus_num is ignored + * + * Create a device to work with a new style i2c driver, where binding is + * handled through driver model probe()/remove() methods. This call is not + * appropriate for use by mainboad initialization logic, which usually runs + * during an arch_initcall() long before any i2c_adapter could exist. + * + * This returns the new i2c client, which may be saved for later use with + * i2c_unregister_device(); or NULL to indicate an error. + */ +struct i2c_client * +i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) +{ + struct i2c_client *client; + int status; -void i2c_adapter_dev_release(struct device *dev) + client = kzalloc(sizeof *client, GFP_KERNEL); + if (!client) + return NULL; + + client->adapter = adap; + + client->dev.platform_data = info->platform_data; + client->flags = info->flags; + client->addr = info->addr; + client->irq = info->irq; + + strlcpy(client->driver_name, info->driver_name, + sizeof(client->driver_name)); + strlcpy(client->name, info->type, sizeof(client->name)); + + /* a new style driver may be bound to this device when we + * return from this function, or any later moment (e.g. maybe + * hotplugging will load the driver module). and the device + * refcount model is the standard driver model one. + */ + status = i2c_attach_client(client); + if (status < 0) { + kfree(client); + client = NULL; + } + return client; +} +EXPORT_SYMBOL_GPL(i2c_new_device); + + +/** + * i2c_unregister_device - reverse effect of i2c_new_device() + * @client: value returned from i2c_new_device() + */ +void i2c_unregister_device(struct i2c_client *client) { - struct i2c_adapter *adap = dev_to_i2c_adapter(dev); - complete(&adap->dev_released); + struct i2c_adapter *adapter = client->adapter; + struct i2c_driver *driver = client->driver; + + if (driver && !is_newstyle_driver(driver)) { + dev_err(&client->dev, "can't unregister devices " + "with legacy drivers\n"); + WARN_ON(1); + return; + } + + mutex_lock(&adapter->clist_lock); + list_del(&client->list); + mutex_unlock(&adapter->clist_lock); + + device_unregister(&client->dev); } +EXPORT_SYMBOL_GPL(i2c_unregister_device); -struct device_driver i2c_adapter_driver = { - .owner = THIS_MODULE, - .name = "i2c_adapter", - .bus = &i2c_bus_type, -}; /* ------------------------------------------------------------------------- */ /* I2C bus adapters -- one roots each I2C or SMBUS segment */ -static void i2c_adapter_class_dev_release(struct class_device *dev) +void i2c_adapter_dev_release(struct device *dev) { - struct i2c_adapter *adap = class_dev_to_i2c_adapter(dev); - complete(&adap->class_dev_released); + struct i2c_adapter *adap = to_i2c_adapter(dev); + complete(&adap->dev_released); } +EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); /* exported to i2c-isa */ -static ssize_t i2c_adapter_show_name(struct class_device *cdev, char *buf) +static ssize_t +show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_adapter *adap = class_dev_to_i2c_adapter(cdev); + struct i2c_adapter *adap = to_i2c_adapter(dev); return sprintf(buf, "%s\n", adap->name); } -static struct class_device_attribute i2c_adapter_attrs[] = { - __ATTR(name, S_IRUGO, i2c_adapter_show_name, NULL), +static struct device_attribute i2c_adapter_attrs[] = { + __ATTR(name, S_IRUGO, show_adapter_name, NULL), { }, }; struct class i2c_adapter_class = { .owner = THIS_MODULE, .name = "i2c-adapter", - .class_dev_attrs = i2c_adapter_attrs, - .release = &i2c_adapter_class_dev_release, + .dev_attrs = i2c_adapter_attrs, }; +EXPORT_SYMBOL_GPL(i2c_adapter_class); /* exported to i2c-isa */ -static ssize_t show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct i2c_adapter *adap = dev_to_i2c_adapter(dev); - return sprintf(buf, "%s\n", adap->name); -} -static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); - - -static void i2c_client_release(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - complete(&client->released); -} - -static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf) +static void i2c_scan_static_board_info(struct i2c_adapter *adapter) { - struct i2c_client *client = to_i2c_client(dev); - return sprintf(buf, "%s\n", client->name); + struct i2c_devinfo *devinfo; + + mutex_lock(&__i2c_board_lock); + list_for_each_entry(devinfo, &__i2c_board_list, list) { + if (devinfo->busnum == adapter->nr + && !i2c_new_device(adapter, + &devinfo->board_info)) + printk(KERN_ERR "i2c-core: can't create i2c%d-%04x\n", + i2c_adapter_id(adapter), + devinfo->board_info.addr); + } + mutex_unlock(&__i2c_board_lock); } -/* - * We can't use the DEVICE_ATTR() macro here, as we used the same name for - * an i2c adapter attribute (above). - */ -static struct device_attribute dev_attr_client_name = - __ATTR(name, S_IRUGO, &show_client_name, NULL); - - -/* --------------------------------------------------- - * registering functions - * --------------------------------------------------- - */ - -/* ----- - * i2c_add_adapter is called from within the algorithm layer, - * when a new hw adapter registers. A new device is register to be - * available for clients. - */ -int i2c_add_adapter(struct i2c_adapter *adap) +static int i2c_register_adapter(struct i2c_adapter *adap) { - int id, res = 0; + int res = 0; struct list_head *item; struct i2c_driver *driver; - mutex_lock(&core_lists); - - if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) { - res = -ENOMEM; - goto out_unlock; - } - - res = idr_get_new(&i2c_adapter_idr, adap, &id); - if (res < 0) { - if (res == -EAGAIN) - res = -ENOMEM; - goto out_unlock; - } - - adap->nr = id & MAX_ID_MASK; mutex_init(&adap->bus_lock); mutex_init(&adap->clist_lock); - list_add_tail(&adap->list,&adapters); INIT_LIST_HEAD(&adap->clients); + mutex_lock(&core_lists); + list_add_tail(&adap->list, &adapters); + /* Add the adapter to the driver core. * If the parent pointer is not set up, * we add this adapter to the host bus. @@ -221,27 +346,19 @@ int i2c_add_adapter(struct i2c_adapter *adap) "physical device\n", adap->name); } sprintf(adap->dev.bus_id, "i2c-%d", adap->nr); - adap->dev.driver = &i2c_adapter_driver; adap->dev.release = &i2c_adapter_dev_release; + adap->dev.class = &i2c_adapter_class; res = device_register(&adap->dev); if (res) goto out_list; - res = device_create_file(&adap->dev, &dev_attr_name); - if (res) - goto out_unregister; - - /* Add this adapter to the i2c_adapter class */ - memset(&adap->class_dev, 0x00, sizeof(struct class_device)); - adap->class_dev.dev = &adap->dev; - adap->class_dev.class = &i2c_adapter_class; - strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE); - res = class_device_register(&adap->class_dev); - if (res) - goto out_remove_name; dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); - /* inform drivers of new adapters */ + /* create pre-declared device nodes for new-style drivers */ + if (adap->nr < __i2c_first_dynamic_bus_num) + i2c_scan_static_board_info(adap); + + /* let legacy drivers scan this bus for matching devices */ list_for_each(item,&drivers) { driver = list_entry(item, struct i2c_driver, list); if (driver->attach_adapter) @@ -253,18 +370,98 @@ out_unlock: mutex_unlock(&core_lists); return res; -out_remove_name: - device_remove_file(&adap->dev, &dev_attr_name); -out_unregister: - init_completion(&adap->dev_released); /* Needed? */ - device_unregister(&adap->dev); - wait_for_completion(&adap->dev_released); out_list: list_del(&adap->list); idr_remove(&i2c_adapter_idr, adap->nr); goto out_unlock; } +/** + * i2c_add_adapter - declare i2c adapter, use dynamic bus number + * @adapter: the adapter to add + * + * This routine is used to declare an I2C adapter when its bus number + * doesn't matter. Examples: for I2C adapters dynamically added by + * USB links or PCI plugin cards. + * + * When this returns zero, a new bus number was allocated and stored + * in adap->nr, and the specified adapter became available for clients. + * Otherwise, a negative errno value is returned. + */ +int i2c_add_adapter(struct i2c_adapter *adapter) +{ + int id, res = 0; + +retry: + if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) + return -ENOMEM; + + mutex_lock(&core_lists); + /* "above" here means "above or equal to", sigh */ + res = idr_get_new_above(&i2c_adapter_idr, adapter, + __i2c_first_dynamic_bus_num, &id); + mutex_unlock(&core_lists); + + if (res < 0) { + if (res == -EAGAIN) + goto retry; + return res; + } + + adapter->nr = id; + return i2c_register_adapter(adapter); +} +EXPORT_SYMBOL(i2c_add_adapter); + +/** + * i2c_add_numbered_adapter - declare i2c adapter, use static bus number + * @adap: the adapter to register (with adap->nr initialized) + * + * This routine is used to declare an I2C adapter when its bus number + * matters. Example: for I2C adapters from system-on-chip CPUs, or + * otherwise built in to the system's mainboard, and where i2c_board_info + * is used to properly configure I2C devices. + * + * If no devices have pre-been declared for this bus, then be sure to + * register the adapter before any dynamically allocated ones. Otherwise + * the required bus ID may not be available. + * + * When this returns zero, the specified adapter became available for + * clients using the bus number provided in adap->nr. Also, the table + * of I2C devices pre-declared using i2c_register_board_info() is scanned, + * and the appropriate driver model device nodes are created. Otherwise, a + * negative errno value is returned. + */ +int i2c_add_numbered_adapter(struct i2c_adapter *adap) +{ + int id; + int status; + + if (adap->nr & ~MAX_ID_MASK) + return -EINVAL; + +retry: + if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) + return -ENOMEM; + + mutex_lock(&core_lists); + /* "above" here means "above or equal to", sigh; + * we need the "equal to" result to force the result + */ + status = idr_get_new_above(&i2c_adapter_idr, adap, adap->nr, &id); + if (status == 0 && id != adap->nr) { + status = -EBUSY; + idr_remove(&i2c_adapter_idr, id); + } + mutex_unlock(&core_lists); + if (status == -EAGAIN) + goto retry; + + if (status == 0) + status = i2c_register_adapter(adap); + return status; +} +EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter); int i2c_del_adapter(struct i2c_adapter *adap) { @@ -302,9 +499,19 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ list_for_each_safe(item, _n, &adap->clients) { + struct i2c_driver *driver; + client = list_entry(item, struct i2c_client, list); + driver = client->driver; + + /* new style, follow standard driver model */ + if (!driver || is_newstyle_driver(driver)) { + i2c_unregister_device(client); + continue; + } - if ((res=client->driver->detach_client(client))) { + /* legacy drivers create and remove clients themselves */ + if ((res = driver->detach_client(client))) { dev_err(&adap->dev, "detach_client failed for client " "[%s] at address 0x%02x\n", client->name, client->addr); @@ -314,17 +521,13 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* clean up the sysfs representation */ init_completion(&adap->dev_released); - init_completion(&adap->class_dev_released); - class_device_unregister(&adap->class_dev); - device_remove_file(&adap->dev, &dev_attr_name); device_unregister(&adap->dev); list_del(&adap->list); /* wait for sysfs to drop all references */ wait_for_completion(&adap->dev_released); - wait_for_completion(&adap->class_dev_released); - /* free dynamically allocated bus id */ + /* free bus id */ idr_remove(&i2c_adapter_idr, adap->nr); dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); @@ -333,24 +536,42 @@ int i2c_del_adapter(struct i2c_adapter *adap) mutex_unlock(&core_lists); return res; } +EXPORT_SYMBOL(i2c_del_adapter); + +/* ------------------------------------------------------------------------- */ -/* ----- - * What follows is the "upwards" interface: commands for talking to clients, - * which implement the functions to access the physical information of the - * chips. +/* + * An i2c_driver is used with one or more i2c_client (device) nodes to access + * i2c slave chips, on a bus instance associated with some i2c_adapter. There + * are two models for binding the driver to its device: "new style" drivers + * follow the standard Linux driver model and just respond to probe() calls + * issued if the driver core sees they match(); "legacy" drivers create device + * nodes themselves. */ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) { - struct list_head *item; - struct i2c_adapter *adapter; int res; + /* new style driver methods can't mix with legacy ones */ + if (is_newstyle_driver(driver)) { + if (driver->attach_adapter || driver->detach_adapter + || driver->detach_client) { + printk(KERN_WARNING + "i2c-core: driver [%s] is confused\n", + driver->driver.name); + return -EINVAL; + } + } + /* add the driver to the list of i2c drivers in the driver core */ driver->driver.owner = owner; driver->driver.bus = &i2c_bus_type; + /* for new style drivers, when registration returns the driver core + * will have called probe() for all matching-but-unbound devices. + */ res = driver_register(&driver->driver); if (res) return res; @@ -360,10 +581,11 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) list_add_tail(&driver->list,&drivers); pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); - /* now look for instances of driver on our adapters */ + /* legacy drivers scan i2c busses directly */ if (driver->attach_adapter) { - list_for_each(item,&adapters) { - adapter = list_entry(item, struct i2c_adapter, list); + struct i2c_adapter *adapter; + + list_for_each_entry(adapter, &adapters, list) { driver->attach_adapter(adapter); } } @@ -373,16 +595,22 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) } EXPORT_SYMBOL(i2c_register_driver); -int i2c_del_driver(struct i2c_driver *driver) +/** + * i2c_del_driver - unregister I2C driver + * @driver: the driver being unregistered + */ +void i2c_del_driver(struct i2c_driver *driver) { struct list_head *item1, *item2, *_n; struct i2c_client *client; struct i2c_adapter *adap; - int res = 0; - mutex_lock(&core_lists); + /* new-style driver? */ + if (is_newstyle_driver(driver)) + goto unregister; + /* Have a look at each adapter, if clients of this driver are still * attached. If so, detach them to be able to kill the driver * afterwards. @@ -390,11 +618,10 @@ int i2c_del_driver(struct i2c_driver *driver) list_for_each(item1,&adapters) { adap = list_entry(item1, struct i2c_adapter, list); if (driver->detach_adapter) { - if ((res = driver->detach_adapter(adap))) { + if (driver->detach_adapter(adap)) { dev_err(&adap->dev, "detach_adapter failed " "for driver [%s]\n", driver->driver.name); - goto out_unlock; } } else { list_for_each_safe(item2, _n, &adap->clients) { @@ -404,25 +631,26 @@ int i2c_del_driver(struct i2c_driver *driver) dev_dbg(&adap->dev, "detaching client [%s] " "at 0x%02x\n", client->name, client->addr); - if ((res = driver->detach_client(client))) { + if (driver->detach_client(client)) { dev_err(&adap->dev, "detach_client " "failed for client [%s] at " "0x%02x\n", client->name, client->addr); - goto out_unlock; } } } } + unregister: driver_unregister(&driver->driver); list_del(&driver->list); pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); - out_unlock: mutex_unlock(&core_lists); - return 0; } +EXPORT_SYMBOL(i2c_del_driver); + +/* ------------------------------------------------------------------------- */ static int __i2c_check_addr(struct i2c_adapter *adapter, unsigned int addr) { @@ -447,6 +675,7 @@ int i2c_check_addr(struct i2c_adapter *adapter, int addr) return rval; } +EXPORT_SYMBOL(i2c_check_addr); int i2c_attach_client(struct i2c_client *client) { @@ -463,9 +692,15 @@ int i2c_attach_client(struct i2c_client *client) client->usage_count = 0; client->dev.parent = &client->adapter->dev; - client->dev.driver = &client->driver->driver; client->dev.bus = &i2c_bus_type; - client->dev.release = &i2c_client_release; + + if (client->driver) + client->dev.driver = &client->driver->driver; + + if (client->driver && !is_newstyle_driver(client->driver)) + client->dev.release = i2c_client_release; + else + client->dev.release = i2c_client_dev_release; snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), "%d-%04x", i2c_adapter_id(adapter), client->addr); @@ -474,9 +709,6 @@ int i2c_attach_client(struct i2c_client *client) res = device_register(&client->dev); if (res) goto out_list; - res = device_create_file(&client->dev, &dev_attr_client_name); - if (res) - goto out_unregister; mutex_unlock(&adapter->clist_lock); if (adapter->client_register) { @@ -489,10 +721,6 @@ int i2c_attach_client(struct i2c_client *client) return 0; -out_unregister: - init_completion(&client->released); /* Needed? */ - device_unregister(&client->dev); - wait_for_completion(&client->released); out_list: list_del(&client->list); dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x " @@ -501,7 +729,7 @@ out_unlock: mutex_unlock(&adapter->clist_lock); return res; } - +EXPORT_SYMBOL(i2c_attach_client); int i2c_detach_client(struct i2c_client *client) { @@ -527,7 +755,6 @@ int i2c_detach_client(struct i2c_client *client) mutex_lock(&adapter->clist_lock); list_del(&client->list); init_completion(&client->released); - device_remove_file(&client->dev, &dev_attr_client_name); device_unregister(&client->dev); mutex_unlock(&adapter->clist_lock); wait_for_completion(&client->released); @@ -535,6 +762,7 @@ int i2c_detach_client(struct i2c_client *client) out: return res; } +EXPORT_SYMBOL(i2c_detach_client); static int i2c_inc_use_client(struct i2c_client *client) { @@ -567,6 +795,7 @@ int i2c_use_client(struct i2c_client *client) return 0; } +EXPORT_SYMBOL(i2c_use_client); int i2c_release_client(struct i2c_client *client) { @@ -581,6 +810,7 @@ int i2c_release_client(struct i2c_client *client) return 0; } +EXPORT_SYMBOL(i2c_release_client); void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg) { @@ -601,6 +831,7 @@ void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg) } mutex_unlock(&adap->clist_lock); } +EXPORT_SYMBOL(i2c_clients_command); static int __init i2c_init(void) { @@ -609,16 +840,12 @@ static int __init i2c_init(void) retval = bus_register(&i2c_bus_type); if (retval) return retval; - retval = driver_register(&i2c_adapter_driver); - if (retval) - return retval; return class_register(&i2c_adapter_class); } static void __exit i2c_exit(void) { class_unregister(&i2c_adapter_class); - driver_unregister(&i2c_adapter_driver); bus_unregister(&i2c_bus_type); } @@ -638,8 +865,9 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) #ifdef DEBUG for (ret = 0; ret < num; ret++) { dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, " - "len=%d\n", ret, msgs[ret].flags & I2C_M_RD ? - 'R' : 'W', msgs[ret].addr, msgs[ret].len); + "len=%d%s\n", ret, (msgs[ret].flags & I2C_M_RD) + ? 'R' : 'W', msgs[ret].addr, msgs[ret].len, + (msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : ""); } #endif @@ -653,6 +881,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) return -ENOSYS; } } +EXPORT_SYMBOL(i2c_transfer); int i2c_master_send(struct i2c_client *client,const char *buf ,int count) { @@ -671,6 +900,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count) transmitted, else error code. */ return (ret == 1) ? count : ret; } +EXPORT_SYMBOL(i2c_master_send); int i2c_master_recv(struct i2c_client *client, char *buf ,int count) { @@ -690,7 +920,7 @@ int i2c_master_recv(struct i2c_client *client, char *buf ,int count) transmitted, else error code. */ return (ret == 1) ? count : ret; } - +EXPORT_SYMBOL(i2c_master_recv); int i2c_control(struct i2c_client *client, unsigned int cmd, unsigned long arg) @@ -712,6 +942,7 @@ int i2c_control(struct i2c_client *client, } return ret; } +EXPORT_SYMBOL(i2c_control); /* ---------------------------------------------------- * the i2c address scanning function @@ -853,6 +1084,70 @@ int i2c_probe(struct i2c_adapter *adapter, return 0; } +EXPORT_SYMBOL(i2c_probe); + +struct i2c_client * +i2c_new_probed_device(struct i2c_adapter *adap, + struct i2c_board_info *info, + unsigned short const *addr_list) +{ + int i; + + /* Stop here if the bus doesn't support probing */ + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE)) { + dev_err(&adap->dev, "Probing not supported\n"); + return NULL; + } + + mutex_lock(&adap->clist_lock); + for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) { + /* Check address validity */ + if (addr_list[i] < 0x03 || addr_list[i] > 0x77) { + dev_warn(&adap->dev, "Invalid 7-bit address " + "0x%02x\n", addr_list[i]); + continue; + } + + /* Check address availability */ + if (__i2c_check_addr(adap, addr_list[i])) { + dev_dbg(&adap->dev, "Address 0x%02x already in " + "use, not probing\n", addr_list[i]); + continue; + } + + /* Test address responsiveness + The default probe method is a quick write, but it is known + to corrupt the 24RF08 EEPROMs due to a state machine bug, + and could also irreversibly write-protect some EEPROMs, so + for address ranges 0x30-0x37 and 0x50-0x5f, we use a byte + read instead. Also, some bus drivers don't implement + quick write, so we fallback to a byte read it that case + too. */ + if ((addr_list[i] & ~0x07) == 0x30 + || (addr_list[i] & ~0x0f) == 0x50 + || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) { + if (i2c_smbus_xfer(adap, addr_list[i], 0, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, NULL) >= 0) + break; + } else { + if (i2c_smbus_xfer(adap, addr_list[i], 0, + I2C_SMBUS_WRITE, 0, + I2C_SMBUS_QUICK, NULL) >= 0) + break; + } + } + mutex_unlock(&adap->clist_lock); + + if (addr_list[i] == I2C_CLIENT_END) { + dev_dbg(&adap->dev, "Probing failed, no device found\n"); + return NULL; + } + + info->addr = addr_list[i]; + return i2c_new_device(adap, info); +} +EXPORT_SYMBOL_GPL(i2c_new_probed_device); struct i2c_adapter* i2c_get_adapter(int id) { @@ -866,11 +1161,13 @@ struct i2c_adapter* i2c_get_adapter(int id) mutex_unlock(&core_lists); return adapter; } +EXPORT_SYMBOL(i2c_get_adapter); void i2c_put_adapter(struct i2c_adapter *adap) { module_put(adap->owner); } +EXPORT_SYMBOL(i2c_put_adapter); /* The SMBus parts */ @@ -939,6 +1236,7 @@ s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value) return i2c_smbus_xfer(client->adapter,client->addr,client->flags, value,0,I2C_SMBUS_QUICK,NULL); } +EXPORT_SYMBOL(i2c_smbus_write_quick); s32 i2c_smbus_read_byte(struct i2c_client *client) { @@ -949,12 +1247,14 @@ s32 i2c_smbus_read_byte(struct i2c_client *client) else return data.byte; } +EXPORT_SYMBOL(i2c_smbus_read_byte); s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) { return i2c_smbus_xfer(client->adapter,client->addr,client->flags, I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); } +EXPORT_SYMBOL(i2c_smbus_write_byte); s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) { @@ -965,6 +1265,7 @@ s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) else return data.byte; } +EXPORT_SYMBOL(i2c_smbus_read_byte_data); s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value) { @@ -974,6 +1275,7 @@ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value) I2C_SMBUS_WRITE,command, I2C_SMBUS_BYTE_DATA,&data); } +EXPORT_SYMBOL(i2c_smbus_write_byte_data); s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command) { @@ -984,6 +1286,7 @@ s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command) else return data.word; } +EXPORT_SYMBOL(i2c_smbus_read_word_data); s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) { @@ -993,6 +1296,23 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) I2C_SMBUS_WRITE,command, I2C_SMBUS_WORD_DATA,&data); } +EXPORT_SYMBOL(i2c_smbus_write_word_data); + +/* Returns the number of read bytes */ +s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, + u8 *values) +{ + union i2c_smbus_data data; + + if (i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data)) + return -1; + + memcpy(values, &data.block[1], data.block[0]); + return data.block[0]; +} +EXPORT_SYMBOL(i2c_smbus_read_block_data); s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values) @@ -1007,6 +1327,7 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, I2C_SMBUS_WRITE,command, I2C_SMBUS_BLOCK_DATA,&data); } +EXPORT_SYMBOL(i2c_smbus_write_block_data); /* Returns the number of read bytes */ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values) @@ -1021,6 +1342,7 @@ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *val memcpy(values, &data.block[1], data.block[0]); return data.block[0]; } +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values) @@ -1035,6 +1357,7 @@ s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, I2C_SMBUS_WRITE, command, I2C_SMBUS_I2C_BLOCK_DATA, &data); } +EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); /* Simulate a SMBus command using the i2c protocol No checking of parameters is done! */ @@ -1098,9 +1421,9 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { - dev_err(&adapter->dev, "Block read not supported " - "under I2C emulation!\n"); - return -1; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ } else { msg[0].len = data->block[0] + 2; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { @@ -1114,9 +1437,21 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, } break; case I2C_SMBUS_BLOCK_PROC_CALL: - dev_dbg(&adapter->dev, "Block process call not supported " - "under I2C emulation!\n"); - return -1; + num = 2; /* Another special case */ + read_write = I2C_SMBUS_READ; + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, "%s called with invalid " + "block proc call size (%d)\n", __FUNCTION__, + data->block[0]); + return -1; + } + msg[0].len = data->block[0] + 2; + for (i = 1; i < msg[0].len; i++) + msgbuf0[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; + msg[1].len = 1; /* block length will be added by + the underlying bus driver */ + break; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { msg[1].len = I2C_SMBUS_BLOCK_MAX; @@ -1180,6 +1515,11 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) data->block[i+1] = msgbuf1[i]; break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + for (i = 0; i < msgbuf1[0] + 1; i++) + data->block[i] = msgbuf1[i]; + break; } return 0; } @@ -1204,43 +1544,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, return res; } - - -/* Next four are needed by i2c-isa */ -EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); -EXPORT_SYMBOL_GPL(i2c_adapter_driver); -EXPORT_SYMBOL_GPL(i2c_adapter_class); -EXPORT_SYMBOL_GPL(i2c_bus_type); - -EXPORT_SYMBOL(i2c_add_adapter); -EXPORT_SYMBOL(i2c_del_adapter); -EXPORT_SYMBOL(i2c_del_driver); -EXPORT_SYMBOL(i2c_attach_client); -EXPORT_SYMBOL(i2c_detach_client); -EXPORT_SYMBOL(i2c_use_client); -EXPORT_SYMBOL(i2c_release_client); -EXPORT_SYMBOL(i2c_clients_command); -EXPORT_SYMBOL(i2c_check_addr); - -EXPORT_SYMBOL(i2c_master_send); -EXPORT_SYMBOL(i2c_master_recv); -EXPORT_SYMBOL(i2c_control); -EXPORT_SYMBOL(i2c_transfer); -EXPORT_SYMBOL(i2c_get_adapter); -EXPORT_SYMBOL(i2c_put_adapter); -EXPORT_SYMBOL(i2c_probe); - EXPORT_SYMBOL(i2c_smbus_xfer); -EXPORT_SYMBOL(i2c_smbus_write_quick); -EXPORT_SYMBOL(i2c_smbus_read_byte); -EXPORT_SYMBOL(i2c_smbus_write_byte); -EXPORT_SYMBOL(i2c_smbus_read_byte_data); -EXPORT_SYMBOL(i2c_smbus_write_byte_data); -EXPORT_SYMBOL(i2c_smbus_read_word_data); -EXPORT_SYMBOL(i2c_smbus_write_word_data); -EXPORT_SYMBOL(i2c_smbus_write_block_data); -EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data); -EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); MODULE_DESCRIPTION("I2C-Bus main module"); diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h new file mode 100644 index 0000000..cd5bff8 --- /dev/null +++ b/drivers/i2c/i2c-core.h @@ -0,0 +1,31 @@ +/* + * i2c-core.h - interfaces internal to the I2C framework + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +struct i2c_devinfo { + struct list_head list; + int busnum; + struct i2c_board_info board_info; +}; + +/* board_lock protects board_list and first_dynamic_bus_num. + * only i2c core components are allowed to use these symbols. + */ +extern struct mutex __i2c_board_lock; +extern struct list_head __i2c_board_list; +extern int __i2c_first_dynamic_bus_num; + |