aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/cpu/cpufreq
Commit message (Collapse)AuthorAgeFilesLines
* acpi-cpufreq: fix printk typo and indentationJoe Perches2009-05-291-2/+2
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* [CPUFREQ] powernow-k8: determine exact CPU frequency for HW PstatesAndreas Herrmann2009-05-261-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Slightly modified by trenn@suse.de -> only do this on fam 10h and fam 11h. Currently powernow-k8 determines CPU frequency from ACPI PSS objects, but according to AMD family 11h BKDG this frequency is just a rounded value: "CoreFreq (MHz) = The CPU COF specified by MSRC001_00[6B:64][CpuFid] rounded to the nearest 100 Mhz." As a consequnce powernow-k8 reports wrong CPU frequency on some systems, e.g. on Turion X2 Ultra: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) But this is wrong as frequency for Pstate2 is 550 MHz. x86info reports it correctly: #x86info -a |grep Pstate ... Pstate-0: fid=e, did=0, vid=24 (2200MHz) Pstate-1: fid=e, did=1, vid=30 (1100MHz) Pstate-2: fid=e, did=2, vid=3c (550MHz) (current) Solution is to determine the frequency directly from Pstate MSRs instead of using rounded values from ACPI table. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
* [CPUFREQ] powernow-k8 cleanup msg if BIOS does not export ACPI _PSS cpufreq dataThomas Renninger2009-05-261-14/+5
| | | | | | | | | - Make the message shorter and easier to grep for - Use printk_once instead of WARN_ONCE (functionality of these was mixed) Signed-off-by: Thomas Renninger <trenn@suse.de> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
* [CPUFREQ] powernow-k7 build fix when ACPI=nDave Jones2009-05-261-0/+2
| | | | | | | arch/x86/kernel/cpu/cpufreq/powernow-k7.c:172: warning: 'invalidate_entry' defined but not used Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Dave Jones <davej@redhat.com>
* [CPUFREQ] add atom family to p4-clockmodJarod Wilson2009-05-261-0/+1
| | | | | | | | | | | Some atom procs don't do freq scaling (such as the atom 330 on my own littlefalls2 board). By adding the atom family here, we at least get the benefit of passive cooling in a thermal emergency. Not sure how to see that its actually helping any, but the driver does bind and claim its functioning on my atom 330. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
* acpi-cpufreq: Do not let get_measured perf depend on internal variableThomas Renninger2009-04-191-3/+4
| | | | | | | | | | | | | Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq specific max_freq variable. This implies that P0 is always the highest frequency which should always be true as ACPI spec says: As a result, the zeroth entry describes the highest performance state Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* acpi-cpufreq: style-only: add parens to math expressionThomas Renninger2009-04-191-1/+1
| | | | | Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* acpi-cpufreq: Cleanup: Use printk_onceThomas Renninger2009-04-191-6/+2
| | | | | Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perfPallipadi, Venkatesh2009-04-191-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix for a regression that was introduced by earlier commit 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c on Mon Apr 6 11:26:08 2009 Regression resulted in the below error happened on systems with software coordination where per_cpu acpi data will not be initiated for secondary CPUs in a P-state domain. On Tue, 2009-04-14 at 23:01 -0700, Zhang, Yanmin wrote: My machine hanged with kernel 2.6.30-rc2 when script read > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor. > > opps happens in get_measured_perf: > > cur.aperf.whole = readin.aperf.whole - > per_cpu(drv_data, cpu)->saved_aperf; > > Because per_cpu(drv_data, cpu)=NULL. > > So function get_measured_perf should check if (per_cpu(drv_data, > cpu)==NULL) > and return 0 if it's NULL. --------------sys log------------------ BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8021af75>] get_measured_perf+0x4a/0xf9 PGD a7dd88067 PUD a7ccf5067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor CPU 0 Modules linked in: video output Pid: 2091, comm: kondemand/0 Not tainted 2.6.30-rc2 #1 MP Server RIP: 0010:[<ffffffff8021af75>] [<ffffffff8021af75>] get_measured_perf+0x4a/0xf9 RSP: 0018:ffff880a7d56de20 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000046241a42b6 RCX: ffff88004d219000 RDX: 000000000000b660 RSI: 0000000000000020 RDI: 0000000000000001 RBP: ffff880a7f052000 R08: 00000046241a42b6 R09: ffffffff807639f0 R10: 00000000ffffffea R11: ffffffff802207f4 R12: ffff880a7f052000 R13: ffff88004d20e460 R14: 0000000000ddd5a6 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88004d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000a7f1bf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kondemand/0 (pid: 2091, threadinfo ffff880a7d56c000, task ffff880a7d4d18c0) Stack: ffff880a7f052078 ffffffff803efd54 00000046241a42b6 000000462ffa9e95 0000000000000001 0000000000000001 00000000ffffffea ffffffff8064f41a 0000000000000012 0000000000000012 ffff880a7f052000 ffffffff80650547 Call Trace: [<ffffffff803efd54>] ? kobject_get+0x12/0x17 [<ffffffff8064f41a>] ? __cpufreq_driver_getavg+0x42/0x57 [<ffffffff80650547>] ? do_dbs_timer+0x147/0x272 [<ffffffff80650400>] ? do_dbs_timer+0x0/0x272 [<ffffffff802474ca>] ? worker_thread+0x15b/0x1f5 [<ffffffff8024a02c>] ? autoremove_wake_function+0x0/0x2e [<ffffffff8024736f>] ? worker_thread+0x0/0x1f5 [<ffffffff80249f0d>] ? kthread+0x54/0x83 [<ffffffff8020c87a>] ? child_rip+0xa/0x20 [<ffffffff80249eb9>] ? kthread+0x0/0x83 [<ffffffff8020c870>] ? child_rip+0x0/0x20 Code: 99 a6 03 00 31 c9 85 c0 0f 85 c3 00 00 00 89 df 4c 8b 44 24 10 48 c7 c2 60 b6 00 00 48 8b 0c fd e0 30 a5 80 4c 89 c3 48 8b 04 0a <48> 2b 58 20 48 8b 44 24 18 48 89 1c 24 48 8b 34 0a 48 2b 46 28 RIP [<ffffffff8021af75>] get_measured_perf+0x4a/0xf9 RSP <ffff880a7d56de20> CR2: 0000000000000020 ---[ end trace 2b8fac9a49e19ad4 ]--- Tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* acpi-cpufreq: fix 'smp_call_function_many()' confusionLinus Torvalds2009-04-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that 'smp_call_function_many()' doesn't work at all like 'smp_call_function_single()', and my change to Andrew's patch to use it rather than a loop over all CPU's acpi-cpufreq doesn't work. My bad. 'smp_call_function_many()' has two "features" (aka "documented bugs"): (a) it needs to be called with preemption disabled, because it uses smp_processor_id() without guarding the CPU lookup with 'get_cpu()' and 'put_cpu()' like the 'single' variant does. (b) even if the current CPU is part of the CPU mask, it won't do the call on that CPU. Still, we're better off trying to use 'smp_call_function_many()' than looping over CPU's, since it at least in theory allows us to use a broadcast IPI and do it all in parallel. So let's just work around the silly semantic bugs in that function. Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix quilt merge error in acpi-cpufreq.cLinus Torvalds2009-04-131-1/+1
| | | | | | | | | | | | | | | | | | We ended up incorrectly using '&cur' instead of '&readin' in the work_on_cpu() -> smp_call_function_single() transformation in commit 01599fca6758d2cd133e78f87426fc851c9ea725 ("cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c"). Andrew explains: "OK, the acpi tree went and had conflicting changes merged into it after I'd written the patch and it appears that I incorrectly reverted part of 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c while fixing the resulting rejects. Switching it to `readin' looks correct." Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.cAndrew Morton2009-04-131-15/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Atttempting to rid us of the problematic work_on_cpu(). Just use smp_call_fuction_single() here. This repairs a 10% sysbench(oltp)+mysql regression which Mike reported, due to commit 6b44003e5ca66a3fffeb5bc90f40ada2c4340896 Author: Andrew Morton <akpm@linux-foundation.org> Date: Thu Apr 9 09:50:37 2009 -0600 work_on_cpu(): rewrite it to create a kernel thread on demand It seems that the kernel calls these acpi-cpufreq functions at a quite high frequency. Valdis Kletnieks also reports that this causes 70-90 forks per second on his hardware. Cc: Valdis.Kletnieks@vt.edu Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Dave Jones <davej@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mike Galbraith <efault@gmx.de> Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> [ Made it use smp_call_function_many() instead of looping over cpu's with smp_call_function_single() - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
*-. Merge branches 'release', 'APERF', 'ARAT', 'misc', 'kelvin', 'device-lock' ↵Len Brown2009-04-071-1/+0
|\ \ | | | | | | | | | and 'bjorn.notify' into release
| | * ACPI: cpufreq: remove dupilcated #includeHuang Weiyi2009-04-071-1/+0
| |/ | | | | | | | | | | | | Remove dupilicated #include in arch/x86/kernel/cpu/cpufreq/longhaul.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI x86: Make aperf/mperf MSR access in acpi_cpufreq read_onlyVenkatesh Pallipadi2009-04-071-5/+10
| | | | | | | | | | | | | | | | Do not write zeroes to APERF and MPERF by ondemand governor. With this change, other users can share these MSRs for reads. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI x86: Cleanup acpi_cpufreq structures related to aperf/mperfVenkatesh Pallipadi2009-04-071-22/+20
|/ | | | | | | | Change structure name to make the code cleaner and simpler. No functionality change in this patch. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'release' of ↵Linus Torvalds2009-04-052-3/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits) ACPI: processor: use .notify method instead of installing handler directly ACPI: button: use .notify method instead of installing handler directly ACPI: support acpi_device_ops .notify methods toshiba-acpi: remove MAINTAINERS entry ACPI: battery: asynchronous init acer-wmi: Update copyright notice & documentation acer-wmi: Cleanup the failure cleanup handling acer-wmi: Blacklist Acer Aspire One video: build fix thinkpad-acpi: rework brightness support thinkpad-acpi: enhanced debugging messages for the fan subdriver thinkpad-acpi: enhanced debugging messages for the hotkey subdriver thinkpad-acpi: enhanced debugging messages for rfkill subdrivers thinkpad-acpi: restrict access to some firmware LEDs thinkpad-acpi: remove HKEY disable functionality thinkpad-acpi: add new debug helpers and warn of deprecated atts thinkpad-acpi: add missing log levels thinkpad-acpi: cleanup debug helpers thinkpad-acpi: documentation cleanup thinkpad-acpi: drop ibm-acpi alias ...
| * Merge branch 'linus' into releaseLen Brown2009-04-0521-721/+965
| |\ | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
| * \ Merge branch 'misc' into releaseLen Brown2009-04-051-0/+12
| |\ \
| | * | ACPI: cap off P-state transition latency from buggy BIOSesPallipadi, Venkatesh2009-03-271-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some BIOSes report very high frequency transition latency which are plainly wrong on CPus that can change frequency using native MSR interface. One such system is IBM T42 (2327-8ZU) as reported by Owen Taylor and Rik van Riel. cpufreq_ondemand driver uses this transition latency to come up with a reasonable sampling interval to sample CPU usage and with such high latency value, ondemand sampling interval ends up being very high (0.5 sec, in this particular case), resulting in performance impact due to slow response to increasing frequency. Fix it by capping-off the transition latency to 20uS for native MSR based frequency transitions. mjg: We've confirmed that this also helps on the X31 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | ACPI: cpufreq: use new bit register access functionLin Ming2009-03-271-3/+3
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | > arch/x86/kernel/cpu/cpufreq/longhaul.c: In function 'longhaul_setstate': > arch/x86/kernel/cpu/cpufreq/longhaul.c:308: error: implicit declaration of function 'acpi_set_register' Signed-off-by: Lin Ming <ming.m.lin@intel.com> Compile-tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Merge branch 'tracing-for-linus' of ↵Linus Torvalds2009-04-051-1/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
| * \ \ Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar2009-04-021-1/+3
| |\ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
| | * | Merge branches 'tracing/ftrace', 'tracing/textedit' and 'linus' into ↵Ingo Molnar2009-03-101-1/+0
| | |\ \ | | | |/ | | | | | | | | tracing/core
| | * | Merge branch 'x86/core' into tracing/texteditIngo Molnar2009-03-063-7/+7
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/Kconfig block/blktrace.c kernel/irq/handle.c Semantic conflict: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * \ \ Merge branch 'linus' into tracing/blktraceIngo Molnar2009-02-191-5/+7
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: block/blktrace.c Semantic merge: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * | | | tracing: convert c/p state power tracer to use tracepointsJason Baron2009-02-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the c/p state "power" tracer to use tracepoints. Avoids a function call when the tracer is disabled. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
| | * | | | Merge branches 'tracing/ftrace' and 'tracing/urgent' into tracing/coreIngo Molnar2009-02-101-6/+22
| | |\ \ \ \
| | * | | | | tracing/power: move the power trace headers to a dedicated fileFrederic Weisbecker2009-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup Move the power tracer headers to trace/power.h to keep ftrace.h and power bits more easy to maintain as separated topics. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | | | | Merge branch 'linus' into cpumask-for-linusIngo Molnar2009-03-3020-714/+958
|\ \ \ \ \ \ \ | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kernel/cpu/common.c
| * | | | | | Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar2009-03-273-7/+7
| |\ \ \ \ \ \ | | | |_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | | | | | Merge branch 'next' of ↵Linus Torvalds2009-03-2620-714/+958
| |\ \ \ \ \ \ | | |_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (35 commits) [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor. [CPUFREQ] Make cpufreq-nforce2 less obnoxious [CPUFREQ] p4-clockmod reports wrong frequency. [CPUFREQ] powernow-k8: Use a common exit path. [CPUFREQ] Change link order of x86 cpufreq modules [CPUFREQ] conservative: remove 10x from def_sampling_rate [CPUFREQ] conservative: fixup governor to function more like ondemand logic [CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked [CPUFREQ] conservative: amend author's email address [CPUFREQ] Use swap() in longhaul.c [CPUFREQ] checkpatch cleanups for acpi-cpufreq [CPUFREQ] powernow-k8: Only print error message once, not per core. [CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions [CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max} [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support [CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency [CPUFREQ] checkpatch cleanups for powernow-k8 [CPUFREQ] checkpatch cleanups for ondemand governor. [CPUFREQ] checkpatch cleanups for powernow-k7 [CPUFREQ] checkpatch cleanups for speedstep related drivers. ...
| | * | | | | [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor.Dave Jones2009-03-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latency of p4-clockmod sucks so hard that scaling on a regular basis with ondemand is a really bad idea. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] Make cpufreq-nforce2 less obnoxiousMatthew Garrett2009-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not owning an nforce2 is a sign of good taste, not an error. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] p4-clockmod reports wrong frequency.Matthias-Christian Ott2009-02-242-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=10968 [ Updated for current tree, and fixed compile failure when p4-clockmod was built modular -- davej] From: Matthias-Christian Ott <ott@mirix.org> Signed-off-by: Dominik Brodowski <linux@brodo.de> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] powernow-k8: Use a common exit path.Dave Jones2009-02-241-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a0abd520fd69295f4a3735e29a9448a32e101d47 introduced a slew of extra kfree/return -ENODEV pairs. This replaces them all with gotos. Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] Change link order of x86 cpufreq modulesMatthew Garrett2009-02-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the link order of the cpufreq modules to ensure that they're probed in the preferred order when statically linked in. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] Use swap() in longhaul.cDave Jones2009-02-241-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove hand-coded implementation of swap() Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for acpi-cpufreqDave Jones2009-02-241-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] powernow-k8: Only print error message once, not per core.Thomas Renninger2009-02-241-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the typical message you get if you plug in a CPU which is newer than your BIOS. It's annoying seeing this message for each core. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI supportThomas Renninger2009-02-243-49/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powernow-k8 driver should always try to get cpufreq info from ACPI. Otherwise it will not be able to detect the transition latency correctly which results in ondemand governor taking a wrong sampling rate which will then result in sever performance loss. Let the user not shoot himself in the foot and always compile in ACPI support for powernow-k8. This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and #ifndef CONFIG_ACPI_PROCESSOR path is chosen. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for powernow-k8Dave Jones2009-02-241-125/+226
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has so many long function names, and deep nested if's The remaining warnings will need some code restructuring to clean up. Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for powernow-k7Dave Jones2009-02-241-100/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asm/timer.h warning can be ignored, it's needed for recalibrate_cpu_khz() Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for speedstep related drivers.Dave Jones2009-02-245-185/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for sc520Dave Jones2009-02-241-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for powernow-k6Dave Jones2009-02-241-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for longrunDave Jones2009-02-241-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for longhaulDave Jones2009-02-242-94/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for gx-suspmodDave Jones2009-02-241-40/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
| | * | | | | [CPUFREQ] checkpatch cleanups for e_powersaverDave Jones2009-02-241-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Jones <davej@redhat.com>
generated by cgit v1.1 at 2025-01-29 13:32:51 +0000