aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* iwlwifi: separated time check for different type of force resetWey-Yi Guy2010-02-193-12/+33
| | | | | | | | | | | | | Use different timing duration check for different type of force reset, force reset request can come from different source and based on different reason; one type of reset request should not block other type of reset request. Adding structure to keep track of different force reset request. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: indicate calib version for 6050 seriesAbhijeet Kolekar2010-02-193-3/+79
| | | | | | | | Indicate calibration version to uCode Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: enable serialization of synchronous commandsReinette Chatre2010-02-197-10/+13
| | | | | | | | | | | | Until now it was only possible to have one synchronous command running at any time. If a synchronous command is in progress when a second request arrives then the second command will fail. Create a new mutex specific for this purpose to only allow one synchronous command at a time, but enable other commands to wait instead of fail if a synchronous command is in progress. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: remove STATUS macros from headerReinette Chatre2010-02-193-20/+2
| | | | | | | | | | iwl3945 includes iwl-core.h in which these STATUS flags are already defined. This also removes a potential confusing definition with iwlcore using STATUS_MODE_PENDING with value 18 and iwl3945 defining (but not using) STATUS_CONF_PENDING for value 18. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix rate control fallback rate selectionFelix Fietkau2010-02-191-8/+7
| | | | | | | | | | | | | | | | When selecting the tx fallback rate, rc.c used a separate variable 'nrix' for storing the next rate index, however it did not use that as reference for further rate index lowering. Because of that, it ended up reusing the same rate for multiple multi-rate retry stages, thus decreasing delivery probability under changing link conditions. This patch removes the separate (unnecessary) variable and fixes fallback the way it was intended to work. This should result in increased throughput and better link stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Added alloc and free hw functionsTeemu Paasikivi2010-02-191-27/+53
| | | | | | | | | | Moved allocation and freeing of context structure of the driver to separate functions from probe and remove functions. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Added IO reset and init functionsTeemu Paasikivi2010-02-193-2/+14
| | | | | | | | | Added reset and init functions to IO layer of the driver. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Renamed IO functionsTeemu Paasikivi2010-02-1910-109/+109
| | | | | | | | | | In preparation for integration of SDIO implementation renamed some IO functions from wl1271_spi_* form to wl1271_*. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Moved common IO functions from wl271_spi.c to wl1271_io.cTeemu Paasikivi2010-02-194-158/+242
| | | | | | | | | | In prepraration for integration of SDIO implementation moved some IO functions common for SPI and SDIO to separate file. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: add testmode supportKalle Valo2010-02-195-1/+318
| | | | | | | | | | Testmode will be used to send PLT (Production Line Testing) commands from user space. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix beacon filter table configurationJuuso Oikarinen2010-02-191-3/+3
| | | | | | | | | | The beacon filter table configuration ACX structure had certain elements reversed, resulting in firmware instability in regard of the feature. Fix the structure. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix ad-hoc SSID updateJuuso Oikarinen2010-02-191-7/+16
| | | | | | | | | | If re-configuring the SSID while ad-hoc was already enabled, the beacon template would be properly updated, but the SSID passed in the CMD_JOIN would not - hence filtering etc would not work properly. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix WEP key handlingJuuso Oikarinen2010-02-192-0/+9
| | | | | | | | | | WEP key index handling was broken: the default key when using key 0 was never specified to the FW, and if using other default than 0, it would be set on the TX path for every single TX'd frame. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix key-remove errorJuuso Oikarinen2010-02-191-0/+7
| | | | | | | | | The new firmware does not allow removal of unicast keys - they will be automatically removed on the next CMD_JOIN. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Optimized RX path packet retrievalJuuso Oikarinen2010-02-191-2/+2
| | | | | | | | | | | Instead of acking RX packets read from the FW once all (of several possible) buffered packets are retrieved, ack packets one by one as they are read. This enables the FW to start receiving more packets from the network while the host read operation is still ongoing. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: wakeup chip in op_conf_tx()Kalle Valo2010-02-191-2/+9
| | | | | | | | | | elp_wakeup() was missing in op_conf_tx() which caused wakeup problems in power save. I forgot to add this part when porting the patch from wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix random MAC address settingJuuso Oikarinen2010-02-191-0/+8
| | | | | | | | | | | If reverting to a random MAC address, the driver would not update it to the NVS file, and hence the firmware frame filtering would not work properly. So update the randomized MAC address to the NVS image. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: skip 3 unused bytes from the NVSLuciano Coelho2010-02-191-3/+8
| | | | | | | | | | Our NVS uploading mechanism had a bug that was causing it to pass three extra zeros at the start of the NVS. This may be a problem in the NVS generation application, but for now we fix it in the driver. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: add most of the normal initialization commands to PLT modeLuciano Coelho2010-02-193-11/+86
| | | | | | | | | | | | We need to configure PLT mode almost in the same way as normal mode. Most of the configuration functions need to be called also when entering PLT, with the exception of a few RX and TX configuration (which cause mac80211 warnings if enable while runnning PLT tests). Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Retrieve device mac address from the nvs fileJuuso Oikarinen2010-02-192-17/+27
| | | | | | | | | | Instead of always randomizing the MAC address, retrieve and configure the MAC address from the device specific nvs file. For now, randomize an address only if the address in the NVS is zero. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use NVS INI file configurationJuuso Oikarinen2010-02-196-432/+77
| | | | | | | | | | Replace the hardcoded general and radio parameter configuration in the driver with configuration taken from the NVS file directly. Also remove the driver dependency to the structures with the parameter data. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: implement WMMKalle Valo2010-02-193-4/+73
| | | | | | | | | | | | Now that necessary commands for WMM are implemented, implement queue handling for WMM. But WMM is not enabled yet, only one queue is used. Based on a similar patch from wl1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: modify wl1271_acx_tid_cfg() to use function parametersKalle Valo2010-02-193-20/+31
| | | | | | | | | | | For WMM we need to configure each tid separately so modify wl1271_acx_tid_cfg() to take the configuration from function parameters instead. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: modify wl1271_acx_ac_cfg() to use function parametersKalle Valo2010-02-193-22/+26
| | | | | | | | | | | For WMM we need to configure each queue separately so modify wl1271_acx_ac_cfg() to take the configuration from function parameters instead. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add SSID configuration for JOIN in ad-hocJuuso Oikarinen2010-02-192-28/+51
| | | | | | | | | | This patch adds code to extract the SSID from the beacon template used for ad-hoc. The mac80211 currently does not provide the SSID, so this is a workaround for that, for now. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix channel changing codeJuuso Oikarinen2010-02-191-2/+10
| | | | | | | | | | The channel changing code would a) change the BSSID to a dummy on upon channel change, breaking connectivity, and b) not update the channel number at all for ad-hoc, breaking adhoc. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix PSM entryJuuso Oikarinen2010-02-196-26/+47
| | | | | | | | | | | | | | Currently the PSM entry function assumes successful operation, and enables ELP, BET and beacon filtering right away. This is bad, because the PSM entry may fail due to environmental issues, which will cause the ELP, BET and beacon filtering to be illegally enabled (because FW remains in active state.) Fix this by enabling ELP, BET and beacon filtering only after successful entry, and by ensuring the firmware is in active mode after the failure. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54usb: Add the USB ID for Belkin (Accton) FD7050E ver 1010ecJean-François Moine2010-02-191-0/+1
| | | | | | | | | Yet another USB ID. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/p54/txrx.c Fix off by one errorDarren Jenkins2010-02-191-1/+1
| | | | | | | | | fix off by one error in the queue size check of p54_tx_qos_accounting_alloc() Coverity CID: 13314 Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Introduce PCMCIA_DEVICE_PROD_ID3Pavel Roskin2010-02-192-18/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | ...and use it in hostap_cs and orinoco_cs. Another PCMCIA device with Intersil Prism chipset has been reported: Socket 0: product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA" manfid: 0x02e0, 0x1011 function: 6 (network) As it's the case with some other Prism based devices, the third ID string contains a design name that should be sufficient to identify the card as having Intersil Prism chipset and thus compatible with both orinoco_cs and hostap_cs. Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only. Use it in orinoco_cs and hostap_cs to match cards with the third ID string indicating Prism chipset. Remove corresponding entries that use PCMCIA_DEVICE_PROD_ID123. Reported-by: Ozzy <ozzymud@gmail.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use the Beacon TX rate from mac80211Jouni Malinen2010-02-161-5/+5
| | | | | | | | Instead of hardcoding the lowest rate for Beacon frames, use the rate index specified in the mac80211 TX info in AP mode. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwl8k: disable softirqs when accessing sta_notify_listPavel Roskin2010-02-161-2/+2
| | | | | | | | | Use spin_[un]lock_bh in mwl8k_sta_notify(). The sta_notify handler is required to be atomic, yet it can be called in process context, so make sure one call won't preempt another. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: rt2800 - Make rt30xx and rt35xx chipsets configurable.Gertjan van Wingerde2010-02-153-115/+258
| | | | | | | | | | | | | | | | | | Support for rt30xx- and rt35xx-based devices is currently not functional in rt2800pci and rt2800usb. In order to not confuse users we shouldn't claim the PCI and USB device ID's for these devices. However, to allow for testing it is good to still have them available, although disabled by default. Make support for these device configuration options that default to off. For rt2800usb a 3rd class of devices is added, which are the unknown devices. For these devices it is known that they are either based on rt28xx, rt30xx or rt35xx, but it is not known on what chipset exactly. These devices are disabled by default as well, until it can be established on what chipset exactly they are based. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: rework RT chipset and revision determination for PCI an SOC devices.Gertjan van Wingerde2010-02-1514-118/+112
| | | | | | | | | | | | | The recent rt2800 devices are no longer really identified by their PCI ID's, but rather by the contents of their CSR0 register. Also for the other chipsets is the contents of this CSR0 register important. Change the chipset determination logic to be more aligned with the rt2800 model. Preparation for the support of rt3070 / rt3090 based devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reorganize RT chipset setting for PCI/SOC devices.Gertjan van Wingerde2010-02-1512-59/+58
| | | | | | | | | | | Don't set the RT chipset for a device from within the generic PCI/SOC code, but rather from the individual drivers, so that individual drivers have more control over what RT chipset is set. Preparation for chip handling updates for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Introduce SoC interface type.Gertjan van Wingerde2010-02-154-38/+34
| | | | | | | | | | Introduce the SoC interface type to detect SoC devices, instead of having them mimic being PCI devices. This allows for easier detection of SoC devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54usb: Add usbid for Corega CG-WLUSB2GT.Shimada Hirofumi2010-02-151-0/+1
| | | | | | Signed-off-by: Shimada Hirofumi <hirofumi@flycat.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8187: fix typo in ifdef commentHauke Mehrtens2010-02-152-2/+2
| | | | | | | | Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: fix typo in ifdef commentHauke Mehrtens2010-02-151-1/+1
| | | | | | | Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: airo_cs build fixesRandy Dunlap2010-02-152-0/+2
| | | | | | | | | | | | | | | | | | | | | When WEXT_PRIV is not enabled, airo_cs has build errors. It needs to include net/iw_handler.h and it should select WEXT_PRIV, like the airo driver does. drivers/net/wireless/airo.c:7655: error: unknown field 'num_private' specified in initializer drivers/net/wireless/airo.c:7655: warning: initialization makes pointer from integer without a cast drivers/net/wireless/airo.c:7656: error: unknown field 'num_private_args' specified in initializer drivers/net/wireless/airo.c:7656: warning: excess elements in struct initializer drivers/net/wireless/airo.c:7656: warning: (near initialization for 'airo_handler_def') drivers/net/wireless/airo.c:7658: error: unknown field 'private' specified in initializer drivers/net/wireless/airo.c:7658: warning: initialization makes integer from pointer without a cast drivers/net/wireless/airo.c:7658: error: initializer element is not computable at load time drivers/net/wireless/airo.c:7658: error: (near initialization for 'airo_handler_def.num_standard') drivers/net/wireless/airo.c:7659: error: unknown field 'private_args' specified in initializer drivers/net/wireless/airo.c:7659: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'wireless-next-2.6' of ↵John W. Linville2010-02-1516-124/+273
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
| * iwlwifi: Monitor and recover the aggregation TX flow failureTrieu 'Andrew' Nguyen2010-02-113-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change monitors the tx statistics to detect the drop in throughput. When the throughput drops, the ratio of the actual_ack_count and the expected_ ack_count also drops. At the same time, the aggregated ba_timeout (the number of ba timeout retries) also rises. If the actual_ack_count/expected_ack_count ratio is 0 and the number of ba timeout retries rises to 16, no tx packets (tcp, udp, or ping - icmp) can be delivered. The driver recovers from this situation by reseting the uCode firmware. If the actual_ack_count/expected_ ack_count ratio drops below 50% (but not 0) and the aggregated ba_timeout retries just exceed 5 (but not 16), then the driver can reset the radio to bring the throughput up. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: clear all the stop_queue flag after load firmwareWey-Yi Guy2010-02-112-0/+10
| | | | | | | | | | | | | | | | | | | | | | All the queues are awake and ready to use after loading firmware, for firmware reload case, if any queues was stopped before reload, mac80211 will wake those queues after restart hardware, so make sure all the flag used to keep track of the queue status are reset correctly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: use dma_alloc_coherentStanislaw Gruszka2010-02-116-43/+44
| | | | | | | | | | | | | | | | Change pci_alloc_consistent() to dma_alloc_coherent() so we can use GFP_KERNEL flag. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: Adjusting PLCP error threshold for 1000 NICTrieu 'Andrew' Nguyen2010-02-112-2/+3
| | | | | | | | | | | | | | | | | | | | While testing the station with the NIC 1000 family, it is found that the plcp error can easily exceed 50 value in 100mSecs. This creates unneccessary radio reset/tuning. This patch raises the PLCP error threshold of the NIC 1000 from 50 to 200 error count. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: reset card during probeReinette Chatre2010-02-112-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | To ensure that card is in a sane state during probe we add a reset call. This change was prompted by users of kdump who was not able to bring up the wireless driver in the kdump kernel. The problem here was that the primary kernel, which is not running at the time, left the wireless card up and running. When the kdump kernel starts it is thus possible to immediately receive interrupts from firmware after registering interrupt, but without being ready to deal with interrupts from firmware yet. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: fix scan raceReinette Chatre2010-02-111-15/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a problem if an "internal short scan" is in progress when a mac80211 requested scan arrives. If this new scan request arrives within the "next_scan_jiffies" period then driver will immediately return success and complete the scan. The problem here is that the scan has not been fully initialized at this time (is_internal_short_scan is still set to true because of the currently running scan), which results in the scan completion never to be sent to mac80211. At this time also, evan though the internal short scan is still running the state (is_internal_short_scan) will be set to false, so when the internal scan does complete then mac80211 will receive a scan completion. Fix this by checking right away if a scan is in progress when a scan request arrives from mac80211. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: cleanup return valuesAbhijeet Kolekar2010-02-114-37/+17
| | | | | | | | | | | | | | Cleanup return values and removes unnecessary code. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: remove unused op-code in PHY Calibration commandWey-Yi Guy2010-02-111-4/+0
| | | | | | | | | | | | | | | | Number of calibration op-code are not used by driver, remove those from iwl-commands.h Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: check for aggregation frame and queueWey-Yi Guy2010-02-112-7/+26
| | | | | | | | | | | | | | | | | | | | | | Error checking for aggregation frames should go into aggregation queue, if aggregation queue not available, use legacy queue instead. Also make sure the aggregation queue is available to activate, if driver and mac80211 is out-of-sync, try to disable the queue and sync-up with mac80211. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
generated by cgit v1.1 at 2024-09-08 10:36:43 +0000