aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/irq/chip.c
Commit message (Collapse)AuthorAgeFilesLines
* genirq: Do not mask oneshot edge type interruptsThomas Gleixner2009-08-271-7/+2
| | | | | | | | | | | | | Masking oneshot edge type interrupts is wrong as we might lose an interrupt which is issued when the threaded handler is handling the device. We can keep the irq unmasked safely as with edge type interrupts there is no danger of interrupt floods. If the threaded handler has not yet finished then IRQTF_RUNTHREAD is set which will keep the handler thread active. Debugged and verified in preempt-rt. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: Support nested threaded irq handlingThomas Gleixner2009-08-171-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
* genirq: Add buslock supportThomas Gleixner2009-08-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
* genirq: Add oneshot supportThomas Gleixner2009-08-171-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
* x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESCYinghai Lu2009-04-281-10/+2
| | | | | | | | | | | | | | | | | | | The original feature of migrating irq_desc dynamic was too fragile and was causing problems: it caused crashes on systems with lots of cards with MSI-X when user-space irq-balancer was enabled. We now have new patches that create irq_desc according to device numa node. This patch removes the leftover bits of the dynamic balancer. [ Impact: remove dead code ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F654AF.8000808@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar2009-03-271-1/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * Merge commit 'v2.6.29-rc4' into core/percpuIngo Molnar2009-02-091-0/+2
| |\ | | | | | | | | | | | | | | | Conflicts: arch/x86/mach-voyager/voyager_smp.c arch/x86/mm/fault.c
| * | cpumask: update irq_desc to use cpumask_var_tMike Travis2009-01-111-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: reduce memory usage, use new cpumask API. Replace the affinity and pending_masks with cpumask_var_t's. This adds to the significant size reduction done with the SPARSE_IRQS changes. The added functions (init_alloc_desc_masks & init_copy_desc_masks) are in the include file so they can be inlined (and optimized out for the !CONFIG_CPUMASKS_OFFSTACK case.) [Naming chosen to be consistent with the other init*irq functions, as well as the backwards arg declaration of "from, to" instead of the more common "to, from" standard.] Includes a slight change to the declaration of struct irq_desc to embed the pending_mask within ifdef(CONFIG_SMP) to be consistent with other references, and some small changes to Xen. Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64 Signed-off-by: Mike Travis <travis@sgi.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: virtualization@lists.osdl.org Cc: xen-devel@lists.xensource.com Cc: Yinghai Lu <yhlu.kernel@gmail.com>
| | |
| \ \
*-. \ \ Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/coreIngo Molnar2009-02-131-2/+5
|\ \ \ \ | |_|_|/ |/| | |
| | * | irq: clear kstat_irqsYinghai Lu2009-02-091-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: get correct kstat_irqs [/proc/interrupts] for msi/msi-x etc need to call clear_kstat_irqs(), so when we reuse that irq_desc, we get correct kstat in /proc/interrupts. This makes /proc/interrupts not have <NULL> entries. Don't need to worry about arch that doesn't support genirq, because they will not call dynamic_irq_cleanup(). v2: simplify and make clear_kstat_irqs more robust Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | Merge branch 'linus' into irq/genirqIngo Molnar2009-01-161-1/+1
| |\ \ | | |/
| * | genirq: check chip->ack before callingWang Chen2008-12-291-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix theoretical NULL dereference The generic irq layer doesn't know whether irq_chip has ack routine on some architectures or not. Upon that, before calling chip->ack, we should check that it's not NULL. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | irq: export __set_irq_handler() and handle_level_irq()Ingo Molnar2009-01-141-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | Impact: build fix ARM updates broke x86 allmodconfig builds: ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined! ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds2009-01-021-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
| * Merge branch 'irq/sparseirq' into cpus4096Ingo Molnar2008-12-171-2/+10
| |\ | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kernel/io_apic.c Merge irq/sparseirq here, to resolve conflicts.
| * \ Merge ../linux-2.6-x86Rusty Russell2008-12-131-1/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/kernel/io_apic.c kernel/sched.c kernel/sched_stats.h
| * | | cpumask: make irq_set_affinity() take a const struct cpumaskRusty Russell2008-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: change existing irq_chip API Not much point with gentle transition here: the struct irq_chip's setaffinity method signature needs to change. Fortunately, not widely used code, but hits a few architectures. Note: In irq_select_affinity() I save a temporary in by mangling irq_desc[irq].affinity directly. Ingo, does this break anything? (Folded in fix from KOSAKI Motohiro) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Acked-by: Ingo Molnar <mingo@redhat.com> Cc: ralf@linux-mips.org Cc: grundler@parisc-linux.org Cc: jeremy@xensource.com Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
| | | |
| \ \ \
*-. \ \ \ Merge branches 'irq/sparseirq', 'irq/genirq' and 'irq/urgent'; commit ↵Ingo Molnar2008-12-251-3/+13
|\ \ \ \ \ | |_|/ / / |/| | | / | | |_|/ | |/| | 'v2.6.28' into irq/core
| | * | genirq: record IRQ_LEVEL in irq_desc[]David Brownell2008-12-021-0/+1
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix __irq_set_trigger() for IRQ_LEVEL When recording the irq trigger type, let's also make sure that IRQ_LEVEL gets set correctly. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | x86, sparseirq: move irq_desc according to smp_affinity, v7Yinghai Lu2008-12-171-2/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes if CONFIG_NUMA_MIGRATE_IRQ_DESC is set: - make irq_desc to go with affinity aka irq_desc moving etc - call move_irq_desc in irq_complete_move() - legacy irq_desc is not moved, because they are allocated via static array for logical apic mode, need to add move_desc_in_progress_in_same_domain, otherwise it will not be moved ==> also could need two phases to get irq_desc moved. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * sparse irq_desc[] array: core kernel and x86 changesYinghai Lu2008-12-081-1/+2
|/ | | | | | | | | | | | | | | | | | | | | Impact: new feature Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with NR_CPUS set to large values. The goal is to be able to scale up to much larger NR_IRQS value without impacting the (important) common case. To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of irq_desc pointers. When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc, this also makes the IRQ descriptors NUMA-local (to the site that calls request_irq()). This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now uses desc->chip_data for x86 to store irq_cfg. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* genirq: NULL struct irq_desc's member 'name' in dynamic_irq_cleanup()Dean Nelson2008-10-211-0/+1
| | | | | | | | | | | | | | | | | | If the member 'name' of the irq_desc structure happens to point to a character string that is resident within a kernel module, problems ensue if that module is rmmod'd (at which time dynamic_irq_cleanup() is called) and then later show_interrupts() is called by someone. It is also not a good thing if the character string resided in kmalloc'd space that has been kfree'd (after having called dynamic_irq_cleanup()). dynamic_irq_cleanup() fails to NULL the 'name' member and show_interrupts() references it on a few architectures (like h8300, sh and x86). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* genirq: fix set_irq_type() when recording trigger typeChris Friesen2008-10-211-1/+1
| | | | | | | | | | | | Impact: fix boot hang on a G5 In set_irq_type() we want to pass the type rather than the current interrupt state. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* genirq: cleanup the sparseirq modificationsThomas Gleixner2008-10-161-30/+13
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: revert dynarrayThomas Gleixner2008-10-161-25/+5
| | | | | | Revert the dynarray changes. They need more thought and polishing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* genirq: remove irq_to_desc_allocThomas Gleixner2008-10-161-1/+1
| | | | | | Remove the leftover of sparseirqs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq: set_irq_chip() has redundant call to irq_to_desc()Dean Nelson2008-10-161-1/+0
| | | | | | | | Extraneous call to irq_to_desc(). Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* sparseirq: move kstat_irqs from kstat to irq_desc - fixYinghai Lu2008-10-161-1/+20
| | | | | | | fix non-sparseirq architectures. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86_64: rename irq_desc/irq_desc_allocYinghai Lu2008-10-161-10/+11
| | | | | | | | | | | | | | change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* irq: remove >= nr_irqs checking with config_have_sparse_irqYinghai Lu2008-10-161-22/+27
| | | | | | | | | | remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: move kstat_irqs from kstat to irq_descYinghai Lu2008-10-161-10/+5
| | | | | | | | | | | | | | | | | | | | | based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu2008-10-161-13/+19
| | | | | | | | | | | | | | | | | | irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* irq: introduce nr_irqsYinghai Lu2008-10-161-10/+10
| | | | | | | | | | | at this point nr_irqs is equal NR_IRQS convert a few easy users from NR_IRQS to dynamic nr_irqs. v2: according to Eric, we need to take care of arch without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* genirq: record trigger typeDavid Brownell2008-10-021-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Genirq hasn't previously recorded the trigger type used by any given IRQ, although some irq_chip support has done so. That data can be useful when troubleshooting. This patch records it in the relevant irq_desc.status bits, and improves consistency between the two driver-visible calls affected: - Make set_irq_type() usage match request_irq() usage: * IRQ_TYPE_NONE should be a NOP; succeed, so irq_chip methods won't have to handle that case any more (many do it wrong). * IRQ_TYPE_PROBE is ignored; any buggy out-of-tree callers might need to switch over to the real IRQ probing code. * emit the same diagnostics (from shared utility code) - Their kerneldoc now reflects usage: * request_irq() flags include IRQF_TRIGGER_* to specify active edge(s)/level ... docs previously omitted that * set_irq_type() is declared in <linux/irq.h> so callers should use the (bit-equivalent) IRQ_TYPE_* symbols there Also: adds a warning about shared IRQs that don't end up using the requested trigger mode; and fix an unrelated "sparse" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge commit 'v2.6.27-rc8' into genirqIngo Molnar2008-10-021-8/+4
|\
| * use WARN() in kernel/irq/chip.cArjan van de Ven2008-07-261-8/+4
| | | | | | | | | | | | | | | | | | | | Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | genirq: irq_chip->startup() usage in setup_irq and set_irq_chained handlerPawel MOLL2008-09-061-1/+1
|/ | | | | | | | | | | | | | | | | This patch clarifies usage of irq_chip->startup() callback: 1. The "if (startup) startup(); else enabled();" code in setup_irq() is unnecessary, as startup() falls back to enabled() via default callbacks, set by irq_chip_set_defaults(). 2. When using set_irq_chained_handler() the startup() was never called, which is not good at all... Fixed. And again - when startup() is not defined the call will fall back to enable() than to unmask() via default callbacks. Signed-off-by: Pawel Moll <pawel.moll@st.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* cpumask: Cleanup more uses of CPU_MASK and NODE_MASKMike Travis2008-04-191-1/+1
| | | | | | | | | | | | | | | * Replace usages of CPU_MASK_NONE, CPU_MASK_ALL, NODE_MASK_NONE, NODE_MASK_ALL to reduce stack requirements for large NR_CPUS and MAXNODES counts. * In some cases, the cpumask variable was initialized but then overwritten with another value. This is the case for changes like this: - cpumask_t oldmask = CPU_MASK_ALL; + cpumask_t oldmask; Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* genirq: do not leave interupts enabled on free_irqThomas Gleixner2008-02-191-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The default_disable() function was changed in commit: 76d2160147f43f982dfe881404cfde9fd0a9da21 genirq: do not mask interrupts by default It removed the mask function in favour of the default delayed interrupt disabling. Unfortunately this also broke the shutdown in free_irq() when the last handler is removed from the interrupt for those architectures which rely on the default implementations. Now we can end up with a enabled interrupt line after the last handler was removed, which can result in spurious interrupts. Fix this by adding a default_shutdown function, which is only installed, when the irqchip implementation does provide neither a shutdown nor a disable function. [@stable: affected versions: .21 - .24 ] Pointed-out-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Tested-by: Michael Hennerich <Michael.Hennerich@analog.com>
* IRQ_NOPROBE helper functionsRalf Baechle2008-02-081-0/+36
| | | | | | | | | | | | | | | | | | | | | Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq method may crash the system because handle_percpu_irq does not check IRQ_WAITING. This for example hits the MIPS Qemu configuration. This patch provides two helper functions set_irq_noprobe and set_irq_probe to set rsp. clear the IRQ_NOPROBE flag. The only current caller is MIPS code but this really belongs into generic code. As an aside, interrupt probing these days has become a mostly obsolete if not dangerous art. I think Linux interrupts should be changed to default to non-probing but that's subject of this patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-and-tested-by: Rob Landley <rob@landley.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kernel: remove fastcall in kernel/*Harvey Harrison2008-02-081-5/+5
| | | | | | | | [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* genirq: revert lazy irq disable for simple irqsSteven Rostedt2007-12-181-7/+2
| | | | | | | | | | | | | | | | | | | | In commit 76d2160147f43f982dfe881404cfde9fd0a9da21 lazy irq disabling was implemented, and the simple irq handler had a masking set to it. Remy Bohmer discovered that some devices in the ARM architecture would trigger the mask, but never unmask it. His patch to do the unmasking was questioned by Russell King about masking simple irqs to begin with. Looking further, it was discovered that the problems Remy was seeing was due to improper use of the simple handler by devices, and he later submitted patches to fix those. But the issue that was uncovered was that the simple handler should never mask. This patch reverts the masking in the simple handler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Compile handle_percpu_irq even for uniprocessor kernelsRalf Baechle2007-10-171-3/+0
| | | | | | | | | | | | | | | | | Compiling handle_percpu_irq only on uniprocessor generates an artificial special case so a typical use like: set_irq_chip_and_handler(irq, &some_irq_type, handle_percpu_irq); needs to be conditionally compiled only on SMP systems as well and an alternative UP construct is usually needed - for no good reason. This fixes uniprocessor configurations for some MIPS SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* genirq: cleanup mismerge artifactThomas Gleixner2007-08-121-4/+1
| | | | | | | | | | | | Commit 5a43a066b11ac2fe84cf67307f20b83bea390f83: "genirq: Allow fasteoi handler to retrigger disabled interrupts" was erroneously applied to handle_level_irq(). This added the irq retrigger / resend functionality to the level irq handler. Revert the offending bits. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MSI: arch must connect the irq and the msi_descMichael Ellerman2007-05-021-0/+3
| | | | | | | | | | | | | | | | | | | | set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call it at some point in their setup routine, and then the generic code sets up the reverse mapping from the msi_desc back to the irq. set_irq_msi() should do both connections, making it the one and only call required to connect an irq with it's MSI desc and vice versa. The arch code MUST call set_irq_msi(), and it must do so only once it's sure it's not going to fail the irq allocation. Given that there's no need for the arch to return the irq anymore, the return value from the arch setup routine just becomes 0 for success and anything else for failure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] small irq management simplificationJan Beulich2007-02-161-4/+2
| | | | | | | | | | Use mask_ack_irq() where possible. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] IRQ kernel-doc fixesRandy Dunlap2007-02-161-1/+1
| | | | | | | | Fix kernel-doc warnings in IRQ management. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] genirq: do not mask interrupts by defaultIngo Molnar2007-02-161-7/+10
| | | | | | | | | | | | | | | | Never mask interrupts immediately upon request. Disabling interrupts in high-performance codepaths is rare, and on the other hand this change could recover lost edges (or even other types of lost interrupts) by conservatively only masking interrupts after they happen. (NOTE: with this change the highlevel irq-disable code still soft-disables this IRQ line - and if such an interrupt happens then the IRQ flow handler keeps the IRQ masked.) Mark i8529A controllers as 'never loses an edge'. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* msi: Kill the msi_desc array.Eric W. Biederman2007-02-071-0/+28
| | | | | | | | | | | | | | | | | | | We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] genirq: fix irq flow handler uninstallThomas Gleixner2006-12-221-2/+1
| | | | | | | | | | | | | | The sanity check for no_irq_chip in __set_irq_hander() is unconditional on both install and uninstall of an handler. This triggers false warnings and replaces no_irq_chip by dummy_irq_chip in the uninstall case. Check only, when a real handler is installed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.1 at 2024-12-27 04:53:39 +0000