aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/sched.c
Commit message (Collapse)AuthorAgeFilesLines
...
* [PATCH] cpu hotplug: fix CPU_UP_CANCEL handlingHeiko Carstens2006-06-251-0/+2
| | | | | | | | | | | | | | If a cpu hotplug callback fails on CPU_UP_PREPARE, all callbacks will be called with CPU_UP_CANCELED. A few of these callbacks assume that on CPU_UP_PREPARE a pointer to task has been stored in a percpu array. This assumption is not true if CPU_UP_PREPARE fails and the following calls to kthread_bind() in CPU_UP_CANCELED will cause an addressing exception because of passing a NULL pointer. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Define __raw_get_cpu_var and use itPaul Mackerras2006-06-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | There are several instances of per_cpu(foo, raw_smp_processor_id()), which is semantically equivalent to __get_cpu_var(foo) but without the warning that smp_processor_id() can give if CONFIG_DEBUG_PREEMPT is enabled. For those architectures with optimized per-cpu implementations, namely ia64, powerpc, s390, sparc64 and x86_64, per_cpu() turns into more and slower code than __get_cpu_var(), so it would be preferable to use __get_cpu_var on those platforms. This defines a __raw_get_cpu_var(x) macro which turns into per_cpu(x, raw_smp_processor_id()) on architectures that use the generic per-cpu implementation, and turns into __get_cpu_var(x) on the architectures that have an optimized per-cpu implementation. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cond_resched() might_sleep() fixIngo Molnar2006-06-231-0/+3
| | | | | | | | add the __might_sleep() check back to cond_resched(). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SELinux: add security hooks to {get,set}affinityDavid Quigley2006-06-231-1/+8
| | | | | | | | | | | | This patch adds LSM hooks into the setaffinity and getaffinity functions to enable security modules to control these operations between tasks with task_setscheduler and task_getscheduler LSM hooks. Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert "[PATCH] sched: fix interactive task starvation"Linus Torvalds2006-05-211-44/+18
| | | | | | | | | | | | | | | | | | | This reverts commit 5ce74abe788a26698876e66b9c9ce7e7acc25413 (and its dependent commit 8a5bc075b8d8cf7a87b3f08fad2fba0f5d13295e), because of audio underruns. Reported by Rene Herman <rene.herman@keyaccess.nl>, who also pinpointed the exact cause of the underruns: "Audio underruns galore, with only ogg123 and firefox (browsing the GIT tree online is also a nice trigger by the way). If I back it out, everything is fine for me again." Cc: Rene Herman <rene.herman@keyaccess.nl> Cc: Mike Galbraith <efault@gmx.de> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Remove __devinitdata from notifier block definitionsChandra Seetharaman2006-04-261-1/+1
| | | | | | | | | | | | | | | | Few of the notifier_chain_register() callers use __devinitdata in the definition of notifier_block data structure. It is incorrect as the data structure should be available after the initializations (they do not unregister them during initializations). This was leading to an oops when notifier_chain_register() call is invoked for those callback chains after initialization. This patch fixes all such usages to _not_ have the notifier_block data structure in the init data section. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: don't awaken RT tasks on expired arrayMike Galbraith2006-04-111-1/+1
| | | | | | | | | | | RT tasks are being awakened on the expired array when expired_starving() is true, whereas they really should be excluded. Fix. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix interactive task starvationMike Galbraith2006-04-111-18/+44
| | | | | | | | | | | | | | | | | | | | Fix a starvation problem that occurs when a stream of highly interactive tasks delay an array switch for extended periods despite EXPIRED_STARVING(rq) being true. AFAIKT, the only choice is to enqueue awakening tasks on the expired array in this case. Without this patch, it can be nearly impossible to remotely login to a busy server, and interactive shell commands can starve for minutes. Also, convert the EXPIRED_STARVING macro into an inline function which humans can understand. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: activate SCHED BATCH expiredCon Kolivas2006-03-311-3/+7
| | | | | | | | | | | To increase the strength of SCHED_BATCH as a scheduling hint we can activate batch tasks on the expired array since by definition they are latency insensitive tasks. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: remove on runqueue requeueingCon Kolivas2006-03-311-2/+1
| | | | | | | | | | | | | | | | | | | On runqueue time is used to elevate priority in schedule(). In the code it currently requeues tasks even if their priority is not elevated, which would end up placing them at the end of their runqueue array effectively delaying them instead of improving their priority. Bug spotted by Mike Galbraith <efault@gmx.de> This patch removes this requeueing. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: include noninteractive sleep in idle detectCon Kolivas2006-03-311-2/+1
| | | | | | | | | | Tasks waiting in SLEEP_NONINTERACTIVE state can now get to best priority so they need to be included in the idle detection code. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: dont decrease idle sleep avgCon Kolivas2006-03-311-5/+10
| | | | | | | | | | | | | We watch for tasks that sleep extended periods and don't allow one single prolonged sleep period from elevating priority to maximum bonus to prevent cpu bound tasks from getting high priority with single long sleeps. There is a bug in the current code that also penalises tasks that already have high priority. Correct that bug. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: make task_noninteractive use sleep_typeCon Kolivas2006-03-311-8/+8
| | | | | | | | | | | | | | | | | | | Alterations to the pipe code in the kernel made it possible for relative starvation to occur with tasks that slept waiting on a pipe getting unfair priority bonuses even if they were otherwise fully cpu bound so the TASK_NONINTERACTIVE flag was introduced which prevented any change to sleep_avg while sleeping waiting on a pipe. This change also leads to the converse though, preventing any priority boost from occurring in truly interactive tasks that wait on pipes. Convert the TASK_NONINTERACTIVE flag to set sleep_type to SLEEP_NONINTERACTIVE which will allow a linear bonus to priority based on sleep time thus allowing interactive tasks to get high priority if they sleep enough. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: cleanup task_activated()Con Kolivas2006-03-311-9/+15
| | | | | | | | | | | The activated flag in task_struct is used to track different sleep types and its usage is somewhat obfuscated. Convert the variable to an enum with more descriptive names without altering the function. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: reduce overhead of calc_loadJack Steiner2006-03-311-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, count_active_tasks() calls both nr_running() & nr_interruptible(). Each of these functions does a "for_each_cpu" & reads values from the runqueue of each cpu. Although this is not a lot of instructions, each runqueue may be located on different node. Depending on the architecture, a unique TLB entry may be required to access each runqueue. Since there may be more runqueues than cpu TLB entries, a scan of all runqueues can trash the TLB. Each memory reference incurs a TLB miss & refill. In addition, the runqueue cacheline that contains nr_running & nr_uninterruptible may be evicted from the cache between the two passes. This causes unnecessary cache misses. Combining nr_running() & nr_interruptible() into a single function substantially reduces the TLB & cache misses on large systems. This should have no measureable effect on smaller systems. On a 128p IA64 system running a memory stress workload, the new function reduced the overhead of calc_load() from 605 usec/call to 324 usec/call. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] for_each_possible_cpu: fixes for generic partKAMEZAWA Hiroyuki2006-03-281-4/+4
| | | | | | | | replaces for_each_cpu with for_each_possible_cpu(). Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix group power for allnodes_domainsSiddha, Suresh B2006-03-271-33/+29
| | | | | | | | | | | | Current sched groups power calculation for allnodes_domains is wrong. We should really be using cumulative power of the physical packages in that group (similar to the calculation in node_domains) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: new sched domain for representing multi-coreSiddha, Suresh B2006-03-271-5/+68
| | | | | | | | | | | | | | | | | | | | | | | | | Add a new sched domain for representing multi-core with shared caches between cores. Consider a dual package system, each package containing two cores and with last level cache shared between cores with in a package. If there are two runnable processes, with this appended patch those two processes will be scheduled on different packages. On such systems, with this patch we have observed 8% perf improvement with specJBB(2 warehouse) benchmark and 35% improvement with CFP2000 rate(with 2 users). This new domain will come into play only on multi-core systems with shared caches. On other systems, this sched domain will be removed by domain degeneration code. This new domain can be also used for implementing power savings policy (see OLS 2005 CMP kernel scheduler paper for more details.. I will post another patch for power savings policy soon) Most of the arch/* file changes are for cpu_coregroup_map() implementation. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Small schedule() optimizationAndreas Mohr2006-03-271-7/+5
| | | | | | | | | small schedule() microoptimization. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: fix task interactivity calculationMartin Andersson2006-03-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Is a truncation error in kernel/sched.c triggered when the nice value is negative. The affected code is used in the TASK_INTERACTIVE macro. The code is: #define SCALE(v1,v1_max,v2_max) \ (v1) * (v2_max) / (v1_max) which is used in this way: SCALE(TASK_NICE(p), 40, MAX_BONUS) Comments in the code says: * This part scales the interactivity limit depending on niceness. * * We scale it linearly, offset by the INTERACTIVE_DELTA delta. * Here are a few examples of different nice levels: * * TASK_INTERACTIVE(-20): [1,1,1,1,1,1,1,1,1,0,0] * TASK_INTERACTIVE(-10): [1,1,1,1,1,1,1,0,0,0,0] * TASK_INTERACTIVE( 0): [1,1,1,1,0,0,0,0,0,0,0] * TASK_INTERACTIVE( 10): [1,1,0,0,0,0,0,0,0,0,0] * TASK_INTERACTIVE( 19): [0,0,0,0,0,0,0,0,0,0,0] * * (the X axis represents the possible -5 ... 0 ... +5 dynamic * priority range a task can explore, a value of '1' means the * task is rated interactive.) However, the current code does not scale it linearly and the result differs from the given examples. If the mathematical function "floor" is used when the nice value is negative instead of the truncation one gets when using integer division, the result conforms to the documentation. Output of TASK_INTERACTIVE when using the kernel code: nice dynamic priorities -20 1 1 1 1 1 1 1 1 1 0 0 -19 1 1 1 1 1 1 1 1 0 0 0 -18 1 1 1 1 1 1 1 1 0 0 0 -17 1 1 1 1 1 1 1 1 0 0 0 -16 1 1 1 1 1 1 1 1 0 0 0 -15 1 1 1 1 1 1 1 0 0 0 0 -14 1 1 1 1 1 1 1 0 0 0 0 -13 1 1 1 1 1 1 1 0 0 0 0 -12 1 1 1 1 1 1 1 0 0 0 0 -11 1 1 1 1 1 1 0 0 0 0 0 -10 1 1 1 1 1 1 0 0 0 0 0 -9 1 1 1 1 1 1 0 0 0 0 0 -8 1 1 1 1 1 1 0 0 0 0 0 -7 1 1 1 1 1 0 0 0 0 0 0 -6 1 1 1 1 1 0 0 0 0 0 0 -5 1 1 1 1 1 0 0 0 0 0 0 -4 1 1 1 1 1 0 0 0 0 0 0 -3 1 1 1 1 0 0 0 0 0 0 0 -2 1 1 1 1 0 0 0 0 0 0 0 -1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 2 1 1 1 1 0 0 0 0 0 0 0 3 1 1 1 1 0 0 0 0 0 0 0 4 1 1 1 0 0 0 0 0 0 0 0 5 1 1 1 0 0 0 0 0 0 0 0 6 1 1 1 0 0 0 0 0 0 0 0 7 1 1 1 0 0 0 0 0 0 0 0 8 1 1 0 0 0 0 0 0 0 0 0 9 1 1 0 0 0 0 0 0 0 0 0 10 1 1 0 0 0 0 0 0 0 0 0 11 1 1 0 0 0 0 0 0 0 0 0 12 1 0 0 0 0 0 0 0 0 0 0 13 1 0 0 0 0 0 0 0 0 0 0 14 1 0 0 0 0 0 0 0 0 0 0 15 1 0 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 Output of TASK_INTERACTIVE when using "floor" nice dynamic priorities -20 1 1 1 1 1 1 1 1 1 0 0 -19 1 1 1 1 1 1 1 1 1 0 0 -18 1 1 1 1 1 1 1 1 1 0 0 -17 1 1 1 1 1 1 1 1 1 0 0 -16 1 1 1 1 1 1 1 1 0 0 0 -15 1 1 1 1 1 1 1 1 0 0 0 -14 1 1 1 1 1 1 1 1 0 0 0 -13 1 1 1 1 1 1 1 1 0 0 0 -12 1 1 1 1 1 1 1 0 0 0 0 -11 1 1 1 1 1 1 1 0 0 0 0 -10 1 1 1 1 1 1 1 0 0 0 0 -9 1 1 1 1 1 1 1 0 0 0 0 -8 1 1 1 1 1 1 0 0 0 0 0 -7 1 1 1 1 1 1 0 0 0 0 0 -6 1 1 1 1 1 1 0 0 0 0 0 -5 1 1 1 1 1 1 0 0 0 0 0 -4 1 1 1 1 1 0 0 0 0 0 0 -3 1 1 1 1 1 0 0 0 0 0 0 -2 1 1 1 1 1 0 0 0 0 0 0 -1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 2 1 1 1 1 0 0 0 0 0 0 0 3 1 1 1 1 0 0 0 0 0 0 0 4 1 1 1 0 0 0 0 0 0 0 0 5 1 1 1 0 0 0 0 0 0 0 0 6 1 1 1 0 0 0 0 0 0 0 0 7 1 1 1 0 0 0 0 0 0 0 0 8 1 1 0 0 0 0 0 0 0 0 0 9 1 1 0 0 0 0 0 0 0 0 0 10 1 1 0 0 0 0 0 0 0 0 0 11 1 1 0 0 0 0 0 0 0 0 0 12 1 0 0 0 0 0 0 0 0 0 0 13 1 0 0 0 0 0 0 0 0 0 0 14 1 0 0 0 0 0 0 0 0 0 0 15 1 0 0 0 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 17 0 0 0 0 0 0 0 0 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 19 0 0 0 0 0 0 0 0 0 0 0 Signed-off-by: Martin Andersson <martin.andersson@control.lth.se> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] kretprobe instance recycled by parent processbibo mao2006-03-261-1/+8
| | | | | | | | | | | | | | | | | When kretprobe probes the schedule() function, if the probed process exits then schedule() will never return, so some kretprobe instances will never be recycled. In this patch the parent process will recycle retprobe instances of the probed function and there will be no memory leak of kretprobe instances. Signed-off-by: bibo mao <bibo.mao@intel.com> Cc: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] make bug messages more consistentIngo Molnar2006-03-231-2/+2
| | | | | | | | | Consolidate all kernel bug printouts to begin with the "BUG: " string. Makes it easier to find them in large bootup logs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix scheduler deadlockAnton Blanchard2006-03-231-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have noticed lockups during boot when stress testing kexec on ppc64. Two cpus would deadlock in scheduler code trying to grab already taken spinlocks. The double_rq_lock code uses the address of the runqueue to order the taking of multiple locks. This address is a per cpu variable: if (rq1 < rq2) { spin_lock(&rq1->lock); spin_lock(&rq2->lock); } else { spin_lock(&rq2->lock); spin_lock(&rq1->lock); } On the other hand, the code in wake_sleeping_dependent uses the cpu id order to grab locks: for_each_cpu_mask(i, sibling_map) spin_lock(&cpu_rq(i)->lock); This means we rely on the address of per cpu data increasing as cpu ids increase. While this will be true for the generic percpu implementation it may not be true for arch specific implementations. One way to solve this is to always take runqueues in cpu id order. To do this we add a cpu variable to the runqueue and check it in the double runqueue locking functions. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: remove sleep_avg multiplierMike Galbraith2006-03-221-6/+0
| | | | | | | | | | | | | | | | Remove the sleep_avg multiplier. This multiplier was necessary back when we had 10 seconds of dynamic range in sleep_avg, but now that we only have one second, it causes that one second to be compressed down to 100ms in some cases. This is particularly noticeable when compiling a kernel in a slow NFS mount, and I believe it to be a very likely candidate for other recently reported network related interactivity problems. In testing, I can detect no negative impact of this removal. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove __put_task_struct_cb export againChristoph Hellwig2006-03-111-7/+0
| | | | | | | | | | | | | | | | | | | The patch '[PATCH] RCU signal handling' [1] added an export for __put_task_struct_cb, a put_task_struct helper newly introduced in that patch. But the put_task_struct couldn't be used modular previously as __put_task_struct wasn't exported. There are not callers of it in modular code, and it shouldn't be exported because we don't want drivers to hold references to task_structs. This patch removes the export and folds __put_task_struct into __put_task_struct_cb as there's no other caller. [1] http://www2.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e56d090310d7625ecb43a1eeebd479f04affb48b Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] idle threads should have a sane ->timestamp valueIngo Molnar2006-03-081-0/+1
| | | | | | | | | | | | Idle threads should have a sane ->timestamp value, to avoid init kernel thread(s) from inheriting it and causing miscalculations in try_to_wake_up(). Reported-by: Mike Galbraith <efault@gmx.de>. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Add early-boot-safety check to cond_resched()Linus Torvalds2006-03-061-0/+2
| | | | | | | | | | | | | Just to be safe, we should not trigger a conditional reschedule during the early boot sequence. We've historically done some questionable early on, and the safety warnings in __might_sleep() are generally turned off during that period, so there might be problems lurking. This affects CONFIG_PREEMPT_VOLUNTARY, which takes over might_sleep() to cause a voluntary conditional reschedule. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Introduce CONFIG_DEFAULT_MIGRATION_COSTIngo Molnar2006-02-171-1/+12
| | | | | | | | | | | | | | | | | | | | | Heiko Carstens <heiko.carstens@de.ibm.com> wrote: The boot sequence on s390 sometimes takes ages and we spend a very long time (up to one or two minutes) in calibrate_migration_costs. The time spent there differs from boot to boot. Also the calculated costs differ a lot. I've seen differences by up to a factor of 15 (yes, factor not percent). Also I doubt that making these measurements make much sense on a completely virtualized architecture where you cannot tell how much cpu time you will get anyway. So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture to set the scheduler migration costs. This turns off automatic detection of migration costs. Makes sense on virtual platforms, where migration costs are hard to measure accurately. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: revert "filter affine wakeups"Chen, Kenneth W2006-02-141-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit d7102e95b7b9c00277562c29aad421d2d521c5f6: [PATCH] sched: filter affine wakeups Apparently caused more than 10% performance regression for aim7 benchmark. The setup in use is 16-cpu HP rx8620, 64Gb of memory and 12 MSA1000s with 144 disks. Each disk is 72Gb with a single ext3 filesystem (courtesy of HP, who supplied benchmark results). The problem is, for aim7, the wake-up pattern is random, but it still needs load balancing action in the wake-up path to achieve best performance. With the above commit, lack of load balancing hurts that workload. However, for workloads like database transaction processing, the requirement is exactly opposite. In the wake up path, best performance is achieved with absolutely zero load balancing. We simply wake up the process on the CPU that it was previously run. Worst performance is obtained when we do load balancing at wake up. There isn't an easy way to auto detect the workload characteristics. Ingo's earlier patch that detects idle CPU and decide whether to load balance or not doesn't perform with aim7 either since all CPUs are busy (it causes even bigger perf. regression). Revert commit d7102e95b7b9c00277562c29aad421d2d521c5f6, which causes more than 10% performance regression with aim7. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: remove smpniceNick Piggin2006-02-101-111/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't think the code is quite ready, which is why I asked for Peter's additions to also be merged before I acked it (although it turned out that it still isn't quite ready with his additions either). Basically I have had similar observations to Suresh in that it does not play nicely with the rest of the balancing infrastructure (and raised similar concerns in my review). The samples (group of 4) I got for "maximum recorded imbalance" on a 2x2 SMP+HT Xeon are as follows: | Following boot | hackbench 20 | hackbench 40 -----------+----------------+---------------------+--------------------- 2.6.16-rc2 | 30,37,100,112 | 5600,5530,6020,6090 | 6390,7090,8760,8470 +nosmpnice | 3, 2, 4, 2 | 28, 150, 294, 132 | 348, 348, 294, 347 Hackbench raw performance is down around 15% with smpnice (but that in itself isn't a huge deal because it is just a benchmark). However, the samples show that the imbalance passed into move_tasks is increased by about a factor of 10-30. I think this would also go some way to explaining latency blips turning up in the balancing code (though I haven't actually measured that). We'll probably have to revert this in the SUSE kernel. Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: "Martin J. Bligh" <mbligh@aracnet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: only print migration_cost once per bootChuck Ebbert2006-02-051-6/+8
| | | | | | | | | | migration_cost prints after every CPU hotplug event. Make it print only once at boot. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] percpu data: only iterate over possible CPUsEric Dumazet2006-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: William Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sys_sched_getaffinity() & hotplugJack Steiner2006-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | Change sched_getaffinity() so that it returns a bitmap that indicates the legally schedulable cpus that a task is allowed to run on. Without this patch, if CONFIG_HOTPLUG_CPU is enabled, sched_getaffinity() unconditionally returns (at least on IA64) a mask with NR_CPUS bits set. This conveys no useful infornmation except for a kernel compile option. This fixes a breakage we obseved running recent kernels. We have MPI jobs that use sched_getaffinity() to determine where to place their threads. Placing them on non-existant cpus is problematic :-) Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nathan Lynch <ntl@pobox.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix boot-time slowdown for measure_migration_costIngo Molnar2006-01-311-3/+3
| | | | | | | This reduces the amount of time the migration cost calculations cost during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* [PATCH] fix sched_setscheduler semanticsJason Baron2006-01-181-0/+4
| | | | | | | | | | | | | | Currently, a negative policy argument passed into the 'sys_sched_setscheduler()' system call, will return with success. However, the manpage for 'sys_sched_setscheduler' says: EINVAL The scheduling policy is not one of the recognized policies, or the parameter p does not make sense for the policy. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Unlinline a bunch of other functionsArjan van de Ven2006-01-141-8/+8
| | | | | | | | | | | Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: add new SCHED_BATCH policyIngo Molnar2006-01-141-15/+33
| | | | | | | | | | | | | | Add a new SCHED_BATCH (3) scheduling policy: such tasks are presumed CPU-intensive, and will acquire a constant +5 priority level penalty. Such policy is nice for workloads that are non-interactive, but which do not want to give up their nice levels. The policy is also useful for workloads that want a deterministic scheduling policy without interactivity causing extra preemptions (between that workload's tasks). Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: filter affine wakeupsakpm@osdl.org2006-01-121-1/+9
| | | | | | | | | | | | | | | | | ) From: Nick Piggin <nickpiggin@yahoo.com.au> Track the last waker CPU, and only consider wakeup-balancing if there's a match between current waker CPU and the previous waker CPU. This ensures that there is some correlation between two subsequent wakeup events before we move the task. Should help random-wakeup workloads on large SMP systems, by reducing the migration attempts by a factor of nr_cpus. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] scheduler cache-hot-autodetectakpm@osdl.org2006-01-121-0/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ) From: Ingo Molnar <mingo@elte.hu> This is the latest version of the scheduler cache-hot-auto-tune patch. The first problem was that detection time scaled with O(N^2), which is unacceptable on larger SMP and NUMA systems. To solve this: - I've added a 'domain distance' function, which is used to cache measurement results. Each distance is only measured once. This means that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT distances 0 and 1, and on SMP distance 0 is measured. The code walks the domain tree to determine the distance, so it automatically follows whatever hierarchy an architecture sets up. This cuts down on the boot time significantly and removes the O(N^2) limit. The only assumption is that migration costs can be expressed as a function of domain distance - this covers the overwhelming majority of existing systems, and is a good guess even for more assymetric systems. [ People hacking systems that have assymetries that break this assumption (e.g. different CPU speeds) should experiment a bit with the cpu_distance() function. Adding a ->migration_distance factor to the domain structure would be one possible solution - but lets first see the problem systems, if they exist at all. Lets not overdesign. ] Another problem was that only a single cache-size was used for measuring the cost of migration, and most architectures didnt set that variable up. Furthermore, a single cache-size does not fit NUMA hierarchies with L3 caches and does not fit HT setups, where different CPUs will often have different 'effective cache sizes'. To solve this problem: - Instead of relying on a single cache-size provided by the platform and sticking to it, the code now auto-detects the 'effective migration cost' between two measured CPUs, via iterating through a wide range of cachesizes. The code searches for the maximum migration cost, which occurs when the working set of the test-workload falls just below the 'effective cache size'. I.e. real-life optimized search is done for the maximum migration cost, between two real CPUs. This, amongst other things, has the positive effect hat if e.g. two CPUs share a L2/L3 cache, a different (and accurate) migration cost will be found than between two CPUs on the same system that dont share any caches. (The reliable measurement of migration costs is tricky - see the source for details.) Furthermore i've added various boot-time options to override/tune migration behavior. Firstly, there's a blanket override for autodetection: migration_cost=1000,2000,3000 will override the depth 0/1/2 values with 1msec/2msec/3msec values. Secondly, there's a global factor that can be used to increase (or decrease) the autodetected values: migration_factor=120 will increase the autodetected values by 20%. This option is useful to tune things in a workload-dependent way - e.g. if a workload is cache-insensitive then CPU utilization can be maximized by specifying migration_factor=0. I've tested the autodetection code quite extensively on x86, on 3 P3/Xeon/2MB, and the autodetected values look pretty good: Dual Celeron (128K L2 cache): --------------------- migration cost matrix (max_cache_size: 131072, cpu: 467 MHz): --------------------- [00] [01] [00]: - 1.7(1) [01]: 1.7(1) - --------------------- cacheflush times [2]: 0.0 (0) 1.7 (1784008) --------------------- Here the slow memory subsystem dominates system performance, and even though caches are small, the migration cost is 1.7 msecs. Dual HT P4 (512K L2 cache): --------------------- migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz): --------------------- [00] [01] [02] [03] [00]: - 0.4(1) 0.0(0) 0.4(1) [01]: 0.4(1) - 0.4(1) 0.0(0) [02]: 0.0(0) 0.4(1) - 0.4(1) [03]: 0.4(1) 0.0(0) 0.4(1) - --------------------- cacheflush times [2]: 0.0 (33900) 0.4 (448514) --------------------- Here it can be seen that there is no migration cost between two HT siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory system makes inter-physical-CPU migration pretty cheap: 0.4 msecs. 8-way P3/Xeon [2MB L2 cache]: --------------------- migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz): --------------------- [00] [01] [02] [03] [04] [05] [06] [07] [00]: - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [01]: 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [02]: 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [03]: 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) [04]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) [05]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) [06]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) [07]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - --------------------- cacheflush times [2]: 0.0 (0) 19.2 (19281756) --------------------- This one has huge caches and a relatively slow memory subsystem - so the migration cost is 19 msecs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: <wilder@us.ibm.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Make the cpu_*_maps in kernel/sched.c read mostlyAndi Kleen2006-01-111-3/+3
| | | | | | | They are referred to often so avoid potential false sharing for them. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] move capable() to capability.hRandy.Dunlap2006-01-111-0/+1
| | | | | | | | | | | | | - Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mutex subsystem, more debugging codeIngo Molnar2006-01-091-0/+1
| | | | | | | | more mutex debugging: check for held locks during memory freeing, task exit, enable sysrq printouts, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org>
* [PATCH] RCU signal handlingIngo Molnar2006-01-081-0/+7
| | | | | | | | | | | | | | RCU tasklist_lock and RCU signal handling: send signals RCU-read-locked instead of tasklist_lock read-locked. This is a scalability improvement on SMP and a preemption-latency improvement under PREEMPT_RCU. Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: William Irwin <wli@holomorphy.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68k: introduce setup_thread_stack() and end_of_stack()Al Viro2005-11-131-2/+2
| | | | | | | | | | | | encapsulates the rest of arch-dependent operations with thread_info access. Two new helpers - setup_thread_stack() and end_of_stack(). For normal case the former consists of copying thread_info of parent to new thread_info and the latter returns pointer immediately past the end of thread_info. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68k: introduce task_thread_infoAl Viro2005-11-131-3/+3
| | | | | | | | | | | | | | | new helper - task_thread_info(task). On platforms that have thread_info allocated separately (i.e. in default case) it simply returns task->thread_info. m68k wants (and for good reasons) to embed its thread_info into task_struct. So it will (in later patch) have task_thread_info() of its own. For now we just add a macro for generic case and convert existing instances of its body in core kernel to uses of new macro. Obviously safe - all normal architectures get the same preprocessor output they used to get. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] optimize activate_task()Chen, Kenneth W2005-11-091-1/+2
| | | | | | | | | | | | | | | recalc_task_prio() is called from activate_task() to calculate dynamic priority and interactive credit for the activating task. For real-time scheduling process, all that dynamic calculation is thrown away at the end because rt priority is fixed. Patch to optimize recalc_task_prio() away for rt processes. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <piggin@cyberone.com.au> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: resched and cpu_idle reworkNick Piggin2005-11-091-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: consider migration thread with smp niceCon Kolivas2005-11-091-9/+26
| | | | | | | | | | | | | The intermittent scheduling of the migration thread at ultra high priority makes the smp nice handling see that runqueue as being heavily loaded. The migration thread itself actually handles the balancing so its influence on priority balancing should be ignored. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: correct smp_nice_biasCon Kolivas2005-11-091-6/+8
| | | | | | | | | | | | | | | | | | | The priority biasing was off by mutliplying the total load by the total priority bias and this ruins the ratio of loads between runqueues. This patch should correct the ratios of loads between runqueues to be proportional to overall load. -2nd attempt. From: Dave Kleikamp <shaggy@austin.ibm.com> This patch fixes a divide-by-zero error that I hit on a two-way i386 machine. rq->nr_running is tested to be non-zero, but may change by the time it is used in the division. Saving the value to a local variable ensures that the same value that is checked is used in the division. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sched: smp nice bias busy queues on idle rebalanceCon Kolivas2005-11-091-18/+23
| | | | | | | | | | | | | | | | To intensify the 'nice' support across physical cpus on SMP we can bias the loads on idle rebalancing. To prevent idle rebalance from trying to pull tasks from queues that appear heavily loaded we only bias the load if there is more than one task running. Add some minor micro-optimisations and have only one return from __source_load and __target_load functions. Fix the fact that target_load was not biased by priority when type == 0. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.1 at 2024-10-31 18:27:28 +0000