aboutsummaryrefslogtreecommitdiffstats
path: root/sound/arm/aaci.c
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: aaci - Fix alignment faults on ARM Cortex introduced by commit 29a4f2d3Philby John2010-04-131-2/+5
| | | | | | | | | | | | The commit 29a4f2d3 used writel() at offset 0x26 which is half-word aligned causing unaligned exceptions on a Cortex-A8. The original patch solved the "aaci-pl041 fpga:04: ac97 read back fail" issue on a soft reset. Reading from any arbitrary aaci register seems to solve this issue. Signed-off-by: Philby John <pjohn@mvista.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: sound/arm: Fix build failure caused by missing struct aaci definitionPeter Huewe2009-12-261-2/+1
| | | | | | | | | | | | | | | | | | | This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3aee7996c30f928bbbbfd0994148e35d2e83084 [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: AACI: switch to per-pcm lockingRussell King2009-12-181-20/+29
| | | | | | | | We can use finer-grained locking, which makes things easier when we gain DMA support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: AACI: add double-rate supportRussell King2009-12-181-2/+15
| | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_paramsRussell King2009-12-181-15/+7
| | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: AACI: cleanup aaci_pcm_hw_paramsRussell King2009-12-181-11/+7
| | | | | | | | Since the recording and playback paths are now the same, eliminate the needless conditionals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: AACI: simplify codec rate informationRussell King2009-12-181-72/+3
| | | | | | | | | There's no need for a specific rule; ALSA's generic AC'97 support calculates the necessary rate constraint information itself, and we can use this directly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: aaci - Fix a typoTakashi Iwai2009-12-181-1/+1
| | | | | | | Fixed a typo of the max buffer size specified for buffer allocation changed in the commit d6797322231af98b9bb4afb175dd614cf511e5f7. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/misc' into for-linusTakashi Iwai2009-12-041-14/+5
|\
| * ALSA: aaci - Clean up duplicate codeTakashi Iwai2009-12-011-9/+3
| | | | | | | | | | | | | | Now snd_ac97_pcm_open() is called with the exactly same arguments for both playback and capture directions. Remove the unneeded check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * Merge branch 'fix/misc' into topic/miscTakashi Iwai2009-12-011-1/+5
| |\
| * | ALSA: AACI cleanupRussell King2009-11-231-5/+2
| | | | | | | | | | | | | | | | | | | | | Fix the buffer size calculation to use the size which ALSA is expecting. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | Merge branch 'topic/core-change' into for-linusTakashi Iwai2009-12-041-11/+5
|\ \ \ | |_|/ |/| |
| * | ALSA: Remove old DMA-mmap code from arm/devdma.cTakashi Iwai2009-11-271-11/+5
| |/ | | | | | | | | | | The call of dma_mmap_coherent() is done in the PCM core now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: AACI: fix recording bugRussell King2009-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | pcm->r[1].slots is the double rate slot information, not the capture information. For capture, 'pcm' will already be the capture ac97 pcm structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: AACI: fix AC97 multiple-open bugRussell King2009-11-301-0/+4
|/ | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeoutPhilby John2009-10-131-0/+1
| | | | | | | | | | | | | | After a reboot on an ARM1176 which amounts to a softreset, it has been noted that the ALSA driver does not get registered and the probe fails with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process of reading from a register the SL1TxBusy bit is set indicating that the transceiver is busy and remains so until the default timeout occurs. Set the Power down register 0x26 to an arbitrary value as specified in the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take their default state. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ARM] 5544/1: Trust PrimeCell resource sizesLinus Walleij2009-06-111-1/+1
| | | | | | | | | | | | | | | | | | I found the PrimeCell/AMBA Bus drivers distrusting the resource passed in as part of the struct amba_device abstraction. This patch removes all hard coded resource sizes found in the PrimeCell drivers and move the responsibility of this definition back to the platform/board device definition, which already exist and appear to be correct for all in-tree users of these drivers. We do this using the resource_size() inline function which was also replicated in the only driver using the resource size, so that has been changed too. The KMI_SIZE was left in kmi.h in case someone likes it. Test-compiled against Versatile and Integrator defconfigs, seems to work but I don't posess these boards and cannot test them. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini2009-05-201-1/+1
| | | | | | | | | | | | The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'topic/snd_card_new-err' into for-linusTakashi Iwai2009-03-241-3/+4
|\
| * ALSA: Convert to snd_card_create() in other sound/*Takashi Iwai2009-01-121-3/+4
| | | | | | | | | | | | | | Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | [ARM] AACI: timeout will reach -1Roel Kluin2009-02-101-3/+3
|/ | | | | | | | With a postfix decrement the timeout will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ALSA: aaci - Fix NULL test at error pathTakashi Iwai2008-09-041-3/+3
| | | | | | | | | | The original fix by Julien Brunel <brunel@diku.dk>. aaci_init_card() returns a pointer with ERR_PTR(), but in aaci_init() NULL is supposed at this error path. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-311-1/+0
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* Add missing newlines to some uses of dev_<level> messagesJoe Perches2007-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ARM] Fix ARM AACI ALSA driverRussell King2007-02-201-6/+6
| | | | | | | | | | | | | | | | | CC [M] sound/arm/aaci.o sound/arm/aaci.c:729: error: parse error before '*' token sound/arm/aaci.c:731: warning: function declaration isn't a prototype ... sound/arm/aaci.c:786: error: parse error before '*' token sound/arm/aaci.c:786: warning: function declaration isn't a prototype ... sound/arm/aaci.c:827: error: parse error before '*' token sound/arm/aaci.c:828: warning: function declaration isn't a prototype ... sound/arm/aaci.c:845: error: parse error before "aaci_capture_ops" sound/arm/aaci.c:845: warning: type defaults to `int' in declaration of `aaci_capture_ops' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4140/1: AACI stability add ac97 timeout and retriesKevin Hilman2007-02-181-11/+39
| | | | | | | | Add timeouts to hardware read/write/probe functions in order to avoid lockups on buggy/broken hardware. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4139/1: AACI record supportKevin Hilman2007-02-181-26/+232
| | | | | | | Add PCM audio capture support for AACI audio on Versatile platform. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4138/1: AACI: multiple channel support for IRQ handlingKevin Hilman2007-02-181-3/+4
| | | | | | | | Add AACI channel support to interrupt handler. Also, clear underrun interrupt for correct channel. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 64bit resource: fix up printks for resources in sound driversGreg Kroah-Hartman2006-06-271-2/+3
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] semaphore -> mutex (Archs, misc buses)Ingo Molnar2006-03-221-5/+5
| | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ARM] 3290/1: Fix the FIFO size detectionCatalin Marinas2006-02-011-4/+10
| | | | | | | | | | | | Patch from Catalin Marinas AACI reports TX FIFO full after the first write to it if the AC97 is not enabled. This patch enables the AC97 probing before the check for the TX FIFO size. The patch also adds a warning if the TX FIFO size is not multiple of 16. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge with Linus' kernel.Russell King2006-01-071-45/+39
|\
| * [ALSA] Fix PM supportTakashi Iwai2006-01-031-9/+3
| | | | | | | | | | | | | | | | Modules: ARM AACI PL041 driver,ARM PXA2XX driver Fix PM support of aaci and pxa2xx drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * [ALSA] Remove xxx_t typedefs: ARM AACITakashi Iwai2006-01-031-36/+36
| | | | | | | | | | | | | | | | Modules: ARM AACI PL041 driver,ARM DMA routines Remove xxx_t typedefs from the ARM AACI driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | [ARM] Move AMBA include files to include/linux/amba/Russell King2006-01-071-1/+1
|/ | | | | | | | | Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.hRussell King2005-10-281-0/+1
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] Fix up some pm_message_t typesRichard Purdie2005-09-171-1/+1
| | | | | | | | Fix up some pm_message_t types Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] Add snd_card_set_dev()Takashi Iwai2005-09-121-0/+2
| | | | | | | ARM AACI PL041 driver,PARISC Harmony driver Added snd_card_set_dev() calls to register the device pointer for the card. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] iomem annotations (sound/arm/aaci)viro@ZenIV.linux.org.uk2005-09-071-2/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] ARM AACI primecell driverRussell King2005-05-291-0/+968
ARM,/arm/Makefile,ARM AACI PL041 driver Add support for the ARM AACI Primecell, which provides an AC'97 based interface. This driver only provides playback support. This has been extensively tested with an LM4549 AC'97 codec. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.1 at 2024-12-26 17:13:44 +0000