From af07ac276af6eec5111a6567cb7eaf4d222bd332 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 4 Aug 2006 11:41:51 -0500 Subject: [POWERPC] Remove flush_dcache_all export Removes the flush_dcache_all export for non coherent platforms. We removed the last in-kernel user of this years ago in arch/ppc so it no longer serves a purpose. Plus, it breaks the build at the moment. Signed-off-by: Matt Porter Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index f6a05f0..39d3bfc 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -126,10 +126,6 @@ EXPORT_SYMBOL(pci_bus_mem_base_phys); EXPORT_SYMBOL(pci_bus_to_hose); #endif /* CONFIG_PCI */ -#ifdef CONFIG_NOT_COHERENT_CACHE -EXPORT_SYMBOL(flush_dcache_all); -#endif - EXPORT_SYMBOL(start_thread); EXPORT_SYMBOL(kernel_thread); -- cgit v1.1 From 054389f114fc55d525926b55e82b473b783a7d77 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 4 Aug 2006 11:44:01 -0500 Subject: [POWERPC] Fix powerpc 44x_mmu build The PIN_SIZE definition name changed, update 44x_mmu.c accordingly. Signed-off-by: Matt Porter Signed-off-by: Paul Mackerras --- arch/powerpc/mm/44x_mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 376829e..0a0a048 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -103,7 +103,7 @@ unsigned long __init mmu_mapin_ram(void) /* Determine number of entries necessary to cover lowmem */ pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT); + (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); /* Write upper watermark to save location */ tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; @@ -111,7 +111,7 @@ unsigned long __init mmu_mapin_ram(void) /* If necessary, set additional pinned TLBs */ if (pinned_tlbs > 1) for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE; + unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); } -- cgit v1.1 From 5dc599c206ad50e1b190edfbc98b7cf8ce361003 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Tue, 15 Aug 2006 16:19:02 -0500 Subject: [POWERPC] Allow MPC8641 HPCN to build with CONFIG_PCI disabled too. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 9 +++++++-- arch/powerpc/platforms/86xx/pci.c | 3 ++- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 146da30..813eb58 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -52,6 +52,7 @@ unsigned long pci_dram_offset = 0; #endif +#ifdef CONFIG_PCI static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs) { @@ -60,14 +61,18 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, generic_handle_irq(cascade_irq, regs); desc->chip->eoi(irq); } +#endif /* CONFIG_PCI */ void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; - struct device_node *np, *cascade_node = NULL; - int cascade_irq; + struct device_node *np; phys_addr_t openpic_paddr; +#ifdef CONFIG_PCI + struct device_node *cascade_node = NULL; + int cascade_irq; +#endif np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index bc51390..a8c8f0a 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -188,7 +188,8 @@ int __init add_bridge(struct device_node *dev) printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + (unsigned long) rsrc.start, + hose->first_busno, hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); -- cgit v1.1 From c85c41ad73c6db4cf4cc98c595cc5e2fdbdb53d5 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Thu, 17 Aug 2006 14:27:57 -0500 Subject: [POWERPC] Use mpc8641hpcn PIC base address from dev tree. After going through the trouble of setting up the PIC base address in the pic@40000 device tree node, use it instead of the obsolete hard-coded value. Signed-off-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 813eb58..0b1b521 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -68,37 +68,36 @@ mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; struct device_node *np; - phys_addr_t openpic_paddr; + struct resource res; #ifdef CONFIG_PCI struct device_node *cascade_node = NULL; int cascade_irq; #endif + /* Determine PIC address. */ np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) return; - - /* Determine the Physical Address of the OpenPIC regs */ - openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; + of_address_to_resource(np, 0, &res); /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(np, openpic_paddr, + mpic1 = mpic_alloc(np, res.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); + mpic_assign_isu(mpic1, 0, res.start + 0x10000); /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, res.start + 0x10200); + mpic_assign_isu(mpic1, 2, res.start + 0x10400); + mpic_assign_isu(mpic1, 3, res.start + 0x10600); /* 16 External interrupts * Moving them from [0 - 15] to [64 - 79] */ - mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); + mpic_assign_isu(mpic1, 4, res.start + 0x10000); mpic_init(mpic1); -- cgit v1.1 From bf4152dd7ccb6c060d786200a893dfe30193a07f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 25 Aug 2006 11:58:53 -0500 Subject: [POWERPC] back up old school ipic.[hc] to arch/ppc Keep from breaking 83xx arch/ppc build. Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib. Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 4 +- arch/ppc/syslib/Makefile | 2 +- arch/ppc/syslib/ipic.c | 646 +++++++++++++++++++++++++++++++++++++++++++ arch/ppc/syslib/ipic.h | 47 ++++ 4 files changed, 696 insertions(+), 3 deletions(-) create mode 100644 arch/ppc/syslib/ipic.c create mode 100644 arch/ppc/syslib/ipic.h (limited to 'arch') diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index cebfae2..e5e999e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -9,11 +9,11 @@ obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o -obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o - endif +obj-$(CONFIG_PPC_83xx) += ipic.o +endif diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 2497bbc..dca23f2 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -93,7 +93,7 @@ obj-$(CONFIG_PCI) += pci_auto.o endif obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \ - mpc83xx_sys.o mpc83xx_devices.o + mpc83xx_sys.o mpc83xx_devices.o ipic.o ifeq ($(CONFIG_83xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c new file mode 100644 index 0000000..46801f5 --- /dev/null +++ b/arch/ppc/syslib/ipic.c @@ -0,0 +1,646 @@ +/* + * include/asm-ppc/ipic.c + * + * IPIC routines implementations. + * + * Copyright 2005 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ipic.h" + +static struct ipic p_ipic; +static struct ipic * primary_ipic; + +static struct ipic_info ipic_info[] = { + [9] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 24, + .prio_mask = 0, + }, + [10] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 25, + .prio_mask = 1, + }, + [11] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 26, + .prio_mask = 2, + }, + [14] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 29, + .prio_mask = 5, + }, + [15] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 30, + .prio_mask = 6, + }, + [16] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_D, + .force = IPIC_SIFCR_H, + .bit = 31, + .prio_mask = 7, + }, + [17] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_A, + .force = IPIC_SEFCR, + .bit = 1, + .prio_mask = 5, + }, + [18] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_A, + .force = IPIC_SEFCR, + .bit = 2, + .prio_mask = 6, + }, + [19] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_A, + .force = IPIC_SEFCR, + .bit = 3, + .prio_mask = 7, + }, + [20] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_B, + .force = IPIC_SEFCR, + .bit = 4, + .prio_mask = 4, + }, + [21] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_B, + .force = IPIC_SEFCR, + .bit = 5, + .prio_mask = 5, + }, + [22] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_B, + .force = IPIC_SEFCR, + .bit = 6, + .prio_mask = 6, + }, + [23] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_B, + .force = IPIC_SEFCR, + .bit = 7, + .prio_mask = 7, + }, + [32] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 0, + .prio_mask = 0, + }, + [33] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 1, + .prio_mask = 1, + }, + [34] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 2, + .prio_mask = 2, + }, + [35] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 3, + .prio_mask = 3, + }, + [36] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 4, + .prio_mask = 4, + }, + [37] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 5, + .prio_mask = 5, + }, + [38] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 6, + .prio_mask = 6, + }, + [39] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_H, + .prio = IPIC_SIPRR_A, + .force = IPIC_SIFCR_H, + .bit = 7, + .prio_mask = 7, + }, + [48] = { + .pend = IPIC_SEPNR, + .mask = IPIC_SEMSR, + .prio = IPIC_SMPRR_A, + .force = IPIC_SEFCR, + .bit = 0, + .prio_mask = 4, + }, + [64] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_A, + .force = IPIC_SIFCR_L, + .bit = 0, + .prio_mask = 0, + }, + [65] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_A, + .force = IPIC_SIFCR_L, + .bit = 1, + .prio_mask = 1, + }, + [66] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_A, + .force = IPIC_SIFCR_L, + .bit = 2, + .prio_mask = 2, + }, + [67] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_A, + .force = IPIC_SIFCR_L, + .bit = 3, + .prio_mask = 3, + }, + [68] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_B, + .force = IPIC_SIFCR_L, + .bit = 4, + .prio_mask = 0, + }, + [69] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_B, + .force = IPIC_SIFCR_L, + .bit = 5, + .prio_mask = 1, + }, + [70] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_B, + .force = IPIC_SIFCR_L, + .bit = 6, + .prio_mask = 2, + }, + [71] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = IPIC_SMPRR_B, + .force = IPIC_SIFCR_L, + .bit = 7, + .prio_mask = 3, + }, + [72] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 8, + }, + [73] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 9, + }, + [74] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 10, + }, + [75] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 11, + }, + [76] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 12, + }, + [77] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 13, + }, + [78] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 14, + }, + [79] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 15, + }, + [80] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 16, + }, + [84] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 20, + }, + [85] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 21, + }, + [90] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 26, + }, + [91] = { + .pend = IPIC_SIPNR_H, + .mask = IPIC_SIMSR_L, + .prio = 0, + .force = IPIC_SIFCR_L, + .bit = 27, + }, +}; + +static inline u32 ipic_read(volatile u32 __iomem *base, unsigned int reg) +{ + return in_be32(base + (reg >> 2)); +} + +static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 value) +{ + out_be32(base + (reg >> 2), value); +} + +static inline struct ipic * ipic_from_irq(unsigned int irq) +{ + return primary_ipic; +} + +static void ipic_enable_irq(unsigned int irq) +{ + struct ipic *ipic = ipic_from_irq(irq); + unsigned int src = irq - ipic->irq_offset; + u32 temp; + + temp = ipic_read(ipic->regs, ipic_info[src].mask); + temp |= (1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].mask, temp); +} + +static void ipic_disable_irq(unsigned int irq) +{ + struct ipic *ipic = ipic_from_irq(irq); + unsigned int src = irq - ipic->irq_offset; + u32 temp; + + temp = ipic_read(ipic->regs, ipic_info[src].mask); + temp &= ~(1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].mask, temp); +} + +static void ipic_disable_irq_and_ack(unsigned int irq) +{ + struct ipic *ipic = ipic_from_irq(irq); + unsigned int src = irq - ipic->irq_offset; + u32 temp; + + ipic_disable_irq(irq); + + temp = ipic_read(ipic->regs, ipic_info[src].pend); + temp |= (1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].pend, temp); +} + +static void ipic_end_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + ipic_enable_irq(irq); +} + +struct hw_interrupt_type ipic = { + .typename = " IPIC ", + .enable = ipic_enable_irq, + .disable = ipic_disable_irq, + .ack = ipic_disable_irq_and_ack, + .end = ipic_end_irq, +}; + +void __init ipic_init(phys_addr_t phys_addr, + unsigned int flags, + unsigned int irq_offset, + unsigned char *senses, + unsigned int senses_count) +{ + u32 i, temp = 0; + + primary_ipic = &p_ipic; + primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE); + + primary_ipic->irq_offset = irq_offset; + + ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0); + + /* default priority scheme is grouped. If spread mode is required + * configure SICFR accordingly */ + if (flags & IPIC_SPREADMODE_GRP_A) + temp |= SICFR_IPSA; + if (flags & IPIC_SPREADMODE_GRP_D) + temp |= SICFR_IPSD; + if (flags & IPIC_SPREADMODE_MIX_A) + temp |= SICFR_MPSA; + if (flags & IPIC_SPREADMODE_MIX_B) + temp |= SICFR_MPSB; + + ipic_write(primary_ipic->regs, IPIC_SICNR, temp); + + /* handle MCP route */ + temp = 0; + if (flags & IPIC_DISABLE_MCP_OUT) + temp = SERCR_MCPR; + ipic_write(primary_ipic->regs, IPIC_SERCR, temp); + + /* handle routing of IRQ0 to MCP */ + temp = ipic_read(primary_ipic->regs, IPIC_SEMSR); + + if (flags & IPIC_IRQ0_MCP) + temp |= SEMSR_SIRQ0; + else + temp &= ~SEMSR_SIRQ0; + + ipic_write(primary_ipic->regs, IPIC_SEMSR, temp); + + for (i = 0 ; i < NR_IPIC_INTS ; i++) { + irq_desc[i+irq_offset].chip = &ipic; + irq_desc[i+irq_offset].status = IRQ_LEVEL; + } + + temp = 0; + for (i = 0 ; i < senses_count ; i++) { + if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { + temp |= 1 << (15 - i); + if (i != 0) + irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; + else + irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0; + } + } + ipic_write(primary_ipic->regs, IPIC_SECNR, temp); + + printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS, + senses_count, primary_ipic->regs); +} + +int ipic_set_priority(unsigned int irq, unsigned int priority) +{ + struct ipic *ipic = ipic_from_irq(irq); + unsigned int src = irq - ipic->irq_offset; + u32 temp; + + if (priority > 7) + return -EINVAL; + if (src > 127) + return -EINVAL; + if (ipic_info[src].prio == 0) + return -EINVAL; + + temp = ipic_read(ipic->regs, ipic_info[src].prio); + + if (priority < 4) { + temp &= ~(0x7 << (20 + (3 - priority) * 3)); + temp |= ipic_info[src].prio_mask << (20 + (3 - priority) * 3); + } else { + temp &= ~(0x7 << (4 + (7 - priority) * 3)); + temp |= ipic_info[src].prio_mask << (4 + (7 - priority) * 3); + } + + ipic_write(ipic->regs, ipic_info[src].prio, temp); + + return 0; +} + +void ipic_set_highest_priority(unsigned int irq) +{ + struct ipic *ipic = ipic_from_irq(irq); + unsigned int src = irq - ipic->irq_offset; + u32 temp; + + temp = ipic_read(ipic->regs, IPIC_SICFR); + + /* clear and set HPI */ + temp &= 0x7f000000; + temp |= (src & 0x7f) << 24; + + ipic_write(ipic->regs, IPIC_SICFR, temp); +} + +void ipic_set_default_priority(void) +{ + ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0); + ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1); + ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2); + ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3); + ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4); + ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5); + ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6); + ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7); + + ipic_set_priority(MPC83xx_IRQ_UART1, 0); + ipic_set_priority(MPC83xx_IRQ_UART2, 1); + ipic_set_priority(MPC83xx_IRQ_SEC2, 2); + ipic_set_priority(MPC83xx_IRQ_IIC1, 5); + ipic_set_priority(MPC83xx_IRQ_IIC2, 6); + ipic_set_priority(MPC83xx_IRQ_SPI, 7); + ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0); + ipic_set_priority(MPC83xx_IRQ_PIT, 1); + ipic_set_priority(MPC83xx_IRQ_PCI1, 2); + ipic_set_priority(MPC83xx_IRQ_PCI2, 3); + ipic_set_priority(MPC83xx_IRQ_EXT0, 4); + ipic_set_priority(MPC83xx_IRQ_EXT1, 5); + ipic_set_priority(MPC83xx_IRQ_EXT2, 6); + ipic_set_priority(MPC83xx_IRQ_EXT3, 7); + ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0); + ipic_set_priority(MPC83xx_IRQ_MU, 1); + ipic_set_priority(MPC83xx_IRQ_SBA, 2); + ipic_set_priority(MPC83xx_IRQ_DMA, 3); + ipic_set_priority(MPC83xx_IRQ_EXT4, 4); + ipic_set_priority(MPC83xx_IRQ_EXT5, 5); + ipic_set_priority(MPC83xx_IRQ_EXT6, 6); + ipic_set_priority(MPC83xx_IRQ_EXT7, 7); +} + +void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq) +{ + struct ipic *ipic = primary_ipic; + u32 temp; + + temp = ipic_read(ipic->regs, IPIC_SERMR); + temp |= (1 << (31 - mcp_irq)); + ipic_write(ipic->regs, IPIC_SERMR, temp); +} + +void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq) +{ + struct ipic *ipic = primary_ipic; + u32 temp; + + temp = ipic_read(ipic->regs, IPIC_SERMR); + temp &= (1 << (31 - mcp_irq)); + ipic_write(ipic->regs, IPIC_SERMR, temp); +} + +u32 ipic_get_mcp_status(void) +{ + return ipic_read(primary_ipic->regs, IPIC_SERMR); +} + +void ipic_clear_mcp_status(u32 mask) +{ + ipic_write(primary_ipic->regs, IPIC_SERMR, mask); +} + +/* Return an interrupt vector or -1 if no interrupt is pending. */ +int ipic_get_irq(struct pt_regs *regs) +{ + int irq; + + irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f; + + if (irq == 0) /* 0 --> no irq is pending */ + irq = -1; + + return irq; +} + +static struct sysdev_class ipic_sysclass = { + set_kset_name("ipic"), +}; + +static struct sys_device device_ipic = { + .id = 0, + .cls = &ipic_sysclass, +}; + +static int __init init_ipic_sysfs(void) +{ + int rc; + + if (!primary_ipic->regs) + return -ENODEV; + printk(KERN_DEBUG "Registering ipic with sysfs...\n"); + + rc = sysdev_class_register(&ipic_sysclass); + if (rc) { + printk(KERN_ERR "Failed registering ipic sys class\n"); + return -ENODEV; + } + rc = sysdev_register(&device_ipic); + if (rc) { + printk(KERN_ERR "Failed registering ipic sys device\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_ipic_sysfs); diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h new file mode 100644 index 0000000..a60c9d1 --- /dev/null +++ b/arch/ppc/syslib/ipic.h @@ -0,0 +1,47 @@ +/* + * IPIC private definitions and structure. + * + * Maintainer: Kumar Gala + * + * Copyright 2005 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __IPIC_H__ +#define __IPIC_H__ + +#include + +#define MPC83xx_IPIC_SIZE (0x00100) + +/* System Global Interrupt Configuration Register */ +#define SICFR_IPSA 0x00010000 +#define SICFR_IPSD 0x00080000 +#define SICFR_MPSA 0x00200000 +#define SICFR_MPSB 0x00400000 + +/* System External Interrupt Mask Register */ +#define SEMSR_SIRQ0 0x00008000 + +/* System Error Control Register */ +#define SERCR_MCPR 0x00000001 + +struct ipic { + volatile u32 __iomem *regs; + unsigned int irq_offset; +}; + +struct ipic_info { + u8 pend; /* pending register offset from base */ + u8 mask; /* mask register offset from base */ + u8 prio; /* priority register offset from base */ + u8 force; /* force register offset from base */ + u8 bit; /* register bit position (as per doc) + bit mask = 1 << (31 - bit) */ + u8 prio_mask; /* priority mask value */ +}; + +#endif /* __IPIC_H__ */ -- cgit v1.1 From b9f0f1bb2bcaae96dd3267f6bd3ad1ca44a1f5ad Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 25 Aug 2006 11:59:07 -0500 Subject: [POWERPC] Adapt ipic driver to new host_ops interface, add set_irq_type to set IRQ sense This converts ipic code to Benh's IRQ mods. For the IPIC, IRQ sense values in the device tree equal those in include/linux/irq.h; that's 8 for low assertion (most internal IRQs on mpc83xx), and 2 for high-to-low change. spinlocks added to [un]mask, ack operations; default handler and type now set in host_map; and redundant condition check eliminated. Signed-off-by: Kim Phillips Signed-off-by: Li Yang Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/ipic.c | 303 +++++++++++++++++++++++++++++++-------------- arch/powerpc/sysdev/ipic.h | 23 +++- 2 files changed, 228 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 46801f5..70e7077 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -19,15 +19,18 @@ #include #include #include +#include +#include +#include #include #include +#include #include -#include #include "ipic.h" -static struct ipic p_ipic; static struct ipic * primary_ipic; +static DEFINE_SPINLOCK(ipic_lock); static struct ipic_info ipic_info[] = { [9] = { @@ -373,74 +376,220 @@ static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 out_be32(base + (reg >> 2), value); } -static inline struct ipic * ipic_from_irq(unsigned int irq) +static inline struct ipic * ipic_from_irq(unsigned int virq) { return primary_ipic; } -static void ipic_enable_irq(unsigned int irq) +#define ipic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + +static void ipic_unmask_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; + spin_lock_irqsave(&ipic_lock, flags); + temp = ipic_read(ipic->regs, ipic_info[src].mask); temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_disable_irq(unsigned int irq) +static void ipic_mask_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; + spin_lock_irqsave(&ipic_lock, flags); + temp = ipic_read(ipic->regs, ipic_info[src].mask); temp &= ~(1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_disable_irq_and_ack(unsigned int irq) +static void ipic_ack_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; - ipic_disable_irq(irq); + spin_lock_irqsave(&ipic_lock, flags); temp = ipic_read(ipic->regs, ipic_info[src].pend); temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].pend, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_end_irq(unsigned int irq) +static void ipic_mask_irq_and_ack(unsigned int virq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - ipic_enable_irq(irq); + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&ipic_lock, flags); + + temp = ipic_read(ipic->regs, ipic_info[src].mask); + temp &= ~(1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].mask, temp); + + temp = ipic_read(ipic->regs, ipic_info[src].pend); + temp |= (1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].pend, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -struct hw_interrupt_type ipic = { - .typename = " IPIC ", - .enable = ipic_enable_irq, - .disable = ipic_disable_irq, - .ack = ipic_disable_irq_and_ack, - .end = ipic_end_irq, +static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vold, vnew, edibit; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + /* ipic supports only low assertion and high-to-low change senses + */ + if (!(flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))) { + printk(KERN_ERR "ipic: sense type 0x%x not supported\n", + flow_type); + return -EINVAL; + } + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & IRQ_TYPE_LEVEL_LOW) { + desc->status |= IRQ_LEVEL; + set_irq_handler(virq, handle_level_irq); + } else { + set_irq_handler(virq, handle_edge_irq); + } + + /* only EXT IRQ senses are programmable on ipic + * internal IRQ senses are LEVEL_LOW + */ + if (src == IPIC_IRQ_EXT0) + edibit = 15; + else + if (src >= IPIC_IRQ_EXT1 && src <= IPIC_IRQ_EXT7) + edibit = (14 - (src - IPIC_IRQ_EXT1)); + else + return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL; + + vold = ipic_read(ipic->regs, IPIC_SECNR); + if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING) { + vnew = vold | (1 << edibit); + } else { + vnew = vold & ~(1 << edibit); + } + if (vold != vnew) + ipic_write(ipic->regs, IPIC_SECNR, vnew); + return 0; +} + +static struct irq_chip ipic_irq_chip = { + .typename = " IPIC ", + .unmask = ipic_unmask_irq, + .mask = ipic_mask_irq, + .mask_ack = ipic_mask_irq_and_ack, + .ack = ipic_ack_irq, + .set_type = ipic_set_irq_type, +}; + +static int ipic_host_match(struct irq_host *h, struct device_node *node) +{ + struct ipic *ipic = h->host_data; + + /* Exact match, unless ipic node is NULL */ + return ipic->of_node == NULL || ipic->of_node == node; +} + +static int ipic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct ipic *ipic = h->host_data; + struct irq_chip *chip; + + /* Default chip */ + chip = &ipic->hc_irq; + + set_irq_chip_data(virq, ipic); + set_irq_chip_and_handler(virq, chip, handle_level_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int ipic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* interrupt sense values coming from the device tree equal either + * LEVEL_LOW (low assertion) or EDGE_FALLING (high-to-low change) + */ + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops ipic_host_ops = { + .match = ipic_host_match, + .map = ipic_host_map, + .xlate = ipic_host_xlate, }; -void __init ipic_init(phys_addr_t phys_addr, - unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, - unsigned int senses_count) +void __init ipic_init(struct device_node *node, + unsigned int flags) { - u32 i, temp = 0; + struct ipic *ipic; + struct resource res; + u32 temp = 0, ret; + + ipic = alloc_bootmem(sizeof(struct ipic)); + if (ipic == NULL) + return; + + memset(ipic, 0, sizeof(struct ipic)); + ipic->of_node = node ? of_node_get(node) : NULL; + + ipic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + NR_IPIC_INTS, + &ipic_host_ops, 0); + if (ipic->irqhost == NULL) { + of_node_put(node); + return; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; - primary_ipic = &p_ipic; - primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE); + ipic->regs = ioremap(res.start, res.end - res.start + 1); - primary_ipic->irq_offset = irq_offset; + ipic->irqhost->host_data = ipic; + ipic->hc_irq = ipic_irq_chip; - ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0); + /* init hw */ + ipic_write(ipic->regs, IPIC_SICNR, 0x0); /* default priority scheme is grouped. If spread mode is required * configure SICFR accordingly */ @@ -453,49 +602,35 @@ void __init ipic_init(phys_addr_t phys_addr, if (flags & IPIC_SPREADMODE_MIX_B) temp |= SICFR_MPSB; - ipic_write(primary_ipic->regs, IPIC_SICNR, temp); + ipic_write(ipic->regs, IPIC_SICNR, temp); /* handle MCP route */ temp = 0; if (flags & IPIC_DISABLE_MCP_OUT) temp = SERCR_MCPR; - ipic_write(primary_ipic->regs, IPIC_SERCR, temp); + ipic_write(ipic->regs, IPIC_SERCR, temp); /* handle routing of IRQ0 to MCP */ - temp = ipic_read(primary_ipic->regs, IPIC_SEMSR); + temp = ipic_read(ipic->regs, IPIC_SEMSR); if (flags & IPIC_IRQ0_MCP) temp |= SEMSR_SIRQ0; else temp &= ~SEMSR_SIRQ0; - ipic_write(primary_ipic->regs, IPIC_SEMSR, temp); + ipic_write(ipic->regs, IPIC_SEMSR, temp); - for (i = 0 ; i < NR_IPIC_INTS ; i++) { - irq_desc[i+irq_offset].chip = &ipic; - irq_desc[i+irq_offset].status = IRQ_LEVEL; - } + primary_ipic = ipic; + irq_set_default_host(primary_ipic->irqhost); - temp = 0; - for (i = 0 ; i < senses_count ; i++) { - if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (15 - i); - if (i != 0) - irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; - else - irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0; - } - } - ipic_write(primary_ipic->regs, IPIC_SECNR, temp); - - printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS, - senses_count, primary_ipic->regs); + printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, + primary_ipic->regs); } -int ipic_set_priority(unsigned int irq, unsigned int priority) +int ipic_set_priority(unsigned int virq, unsigned int priority) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); u32 temp; if (priority > 7) @@ -520,10 +655,10 @@ int ipic_set_priority(unsigned int irq, unsigned int priority) return 0; } -void ipic_set_highest_priority(unsigned int irq) +void ipic_set_highest_priority(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); u32 temp; temp = ipic_read(ipic->regs, IPIC_SICFR); @@ -537,37 +672,10 @@ void ipic_set_highest_priority(unsigned int irq) void ipic_set_default_priority(void) { - ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0); - ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1); - ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2); - ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3); - ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4); - ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5); - ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6); - ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7); - - ipic_set_priority(MPC83xx_IRQ_UART1, 0); - ipic_set_priority(MPC83xx_IRQ_UART2, 1); - ipic_set_priority(MPC83xx_IRQ_SEC2, 2); - ipic_set_priority(MPC83xx_IRQ_IIC1, 5); - ipic_set_priority(MPC83xx_IRQ_IIC2, 6); - ipic_set_priority(MPC83xx_IRQ_SPI, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0); - ipic_set_priority(MPC83xx_IRQ_PIT, 1); - ipic_set_priority(MPC83xx_IRQ_PCI1, 2); - ipic_set_priority(MPC83xx_IRQ_PCI2, 3); - ipic_set_priority(MPC83xx_IRQ_EXT0, 4); - ipic_set_priority(MPC83xx_IRQ_EXT1, 5); - ipic_set_priority(MPC83xx_IRQ_EXT2, 6); - ipic_set_priority(MPC83xx_IRQ_EXT3, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0); - ipic_set_priority(MPC83xx_IRQ_MU, 1); - ipic_set_priority(MPC83xx_IRQ_SBA, 2); - ipic_set_priority(MPC83xx_IRQ_DMA, 3); - ipic_set_priority(MPC83xx_IRQ_EXT4, 4); - ipic_set_priority(MPC83xx_IRQ_EXT5, 5); - ipic_set_priority(MPC83xx_IRQ_EXT6, 6); - ipic_set_priority(MPC83xx_IRQ_EXT7, 7); + ipic_write(primary_ipic->regs, IPIC_SIPRR_A, IPIC_SIPRR_A_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SIPRR_D, IPIC_SIPRR_D_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SMPRR_A, IPIC_SMPRR_A_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SMPRR_B, IPIC_SMPRR_B_DEFAULT); } void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq) @@ -600,17 +708,20 @@ void ipic_clear_mcp_status(u32 mask) ipic_write(primary_ipic->regs, IPIC_SERMR, mask); } -/* Return an interrupt vector or -1 if no interrupt is pending. */ -int ipic_get_irq(struct pt_regs *regs) +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int ipic_get_irq(struct pt_regs *regs) { int irq; - irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f; + BUG_ON(primary_ipic == NULL); + +#define IPIC_SIVCR_VECTOR_MASK 0x7f + irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & IPIC_SIVCR_VECTOR_MASK; if (irq == 0) /* 0 --> no irq is pending */ - irq = -1; + return NO_IRQ; - return irq; + return irq_linear_revmap(primary_ipic->irqhost, irq); } static struct sysdev_class ipic_sysclass = { diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h index a60c9d1..c28e589 100644 --- a/arch/powerpc/sysdev/ipic.h +++ b/arch/powerpc/sysdev/ipic.h @@ -15,7 +15,18 @@ #include -#define MPC83xx_IPIC_SIZE (0x00100) +#define NR_IPIC_INTS 128 + +/* External IRQS */ +#define IPIC_IRQ_EXT0 48 +#define IPIC_IRQ_EXT1 17 +#define IPIC_IRQ_EXT7 23 + +/* Default Priority Registers */ +#define IPIC_SIPRR_A_DEFAULT 0x05309770 +#define IPIC_SIPRR_D_DEFAULT 0x05309770 +#define IPIC_SMPRR_A_DEFAULT 0x05309770 +#define IPIC_SMPRR_B_DEFAULT 0x05309770 /* System Global Interrupt Configuration Register */ #define SICFR_IPSA 0x00010000 @@ -31,7 +42,15 @@ struct ipic { volatile u32 __iomem *regs; - unsigned int irq_offset; + + /* The remapper for this IPIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* The device node of the interrupt controller */ + struct device_node *of_node; }; struct ipic_info { -- cgit v1.1 From f1f17716d13bfb709809a3f5c84bda105b646b9e Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 25 Aug 2006 11:59:22 -0500 Subject: [POWERPC] modify mpc83xx platforms to use new IRQ layer This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code. renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy. Signed-off-by: Kim Phillips Signed-off-by: Li Yang Signed-off-by: Paul Mackerras --- arch/powerpc/configs/mpc834x_mds_defconfig | 915 +++++++++++++++++++++++++++++ arch/powerpc/configs/mpc834x_sys_defconfig | 915 ----------------------------- arch/powerpc/platforms/83xx/mpc834x_itx.c | 49 +- arch/powerpc/platforms/83xx/mpc834x_sys.c | 56 +- arch/powerpc/platforms/83xx/mpc83xx.h | 1 + arch/powerpc/platforms/83xx/pci.c | 9 + 6 files changed, 943 insertions(+), 1002 deletions(-) create mode 100644 arch/powerpc/configs/mpc834x_mds_defconfig delete mode 100644 arch/powerpc/configs/mpc834x_sys_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig new file mode 100644 index 0000000..5078b04 --- /dev/null +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -0,0 +1,915 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:56 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC834x_SYS=y +CONFIG_MPC834x=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +# CONFIG_GFAR_NAPI is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_sys_defconfig deleted file mode 100644 index 5078b04..0000000 --- a/arch/powerpc/configs/mpc834x_sys_defconfig +++ /dev/null @@ -1,915 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:56 2006 -# -# CONFIG_PPC64 is not set -CONFIG_PPC32=y -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_DEFAULT_UIMAGE=y - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_52xx is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_6xx=y -CONFIG_83xx=y -CONFIG_PPC_FPU=y -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_STD_MMU_32=y -# CONFIG_SMP is not set - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_SLAB=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_PPC_GEN550=y -# CONFIG_WANT_EARLY_SERIAL is not set - -# -# Platform support -# -CONFIG_MPC834x_SYS=y -CONFIG_MPC834x=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Instrumentation Support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_BOOTX_TEXT is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index b463056..cf3967a 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -46,26 +46,6 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -#ifdef CONFIG_PCI -static int -mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x0e */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x0f */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x10 */ - }; - - const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} -#endif /* CONFIG_PCI */ - /* ************************************************************************ * * Setup the architecture @@ -92,8 +72,6 @@ static void __init mpc834x_itx_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc83xx_map_irq; ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif @@ -106,25 +84,13 @@ static void __init mpc834x_itx_setup_arch(void) void __init mpc834x_itx_init_IRQ(void) { - u8 senses[8] = { - 0, /* EXT 0 */ - IRQ_SENSE_LEVEL, /* EXT 1 */ - IRQ_SENSE_LEVEL, /* EXT 2 */ - 0, /* EXT 3 */ -#ifdef CONFIG_PCI - IRQ_SENSE_LEVEL, /* EXT 4 */ - IRQ_SENSE_LEVEL, /* EXT 5 */ - IRQ_SENSE_LEVEL, /* EXT 6 */ - IRQ_SENSE_LEVEL, /* EXT 7 */ -#else - 0, /* EXT 4 */ - 0, /* EXT 5 */ - 0, /* EXT 6 */ - 0, /* EXT 7 */ -#endif - }; + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; - ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); + ipic_init(np, 0); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. @@ -153,4 +119,7 @@ define_machine(mpc834x_itx) { .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup = mpc83xx_pcibios_fixup, +#endif }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 3e1c16e..32df239 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,33 +43,6 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -#ifdef CONFIG_PCI -static int -mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ - {0, 0, 0, 0}, - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ - {0, 0, 0, 0}, /* idsel 0x19 */ - {0, 0, 0, 0}, /* idsel 0x20 */ - }; - - const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} -#endif /* CONFIG_PCI */ - /* ************************************************************************ * * Setup the architecture @@ -96,8 +69,6 @@ static void __init mpc834x_sys_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc83xx_map_irq; ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif @@ -110,25 +81,13 @@ static void __init mpc834x_sys_setup_arch(void) void __init mpc834x_sys_init_IRQ(void) { - u8 senses[8] = { - 0, /* EXT 0 */ - IRQ_SENSE_LEVEL, /* EXT 1 */ - IRQ_SENSE_LEVEL, /* EXT 2 */ - 0, /* EXT 3 */ -#ifdef CONFIG_PCI - IRQ_SENSE_LEVEL, /* EXT 4 */ - IRQ_SENSE_LEVEL, /* EXT 5 */ - IRQ_SENSE_LEVEL, /* EXT 6 */ - IRQ_SENSE_LEVEL, /* EXT 7 */ -#else - 0, /* EXT 4 */ - 0, /* EXT 5 */ - 0, /* EXT 6 */ - 0, /* EXT 7 */ -#endif - }; + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; - ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); + ipic_init(np, 0); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. @@ -178,4 +137,7 @@ define_machine(mpc834x_sys) { .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup = mpc83xx_pcibios_fixup, +#endif }; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae10..2c82bca 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -11,6 +11,7 @@ extern int add_bridge(struct device_node *dev); extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern void mpc83xx_pcibios_fixup(void); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 3b5e563..5d84a9c 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -45,6 +45,15 @@ int mpc83xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init mpc83xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + /* map all the PCI irqs */ + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + int __init add_bridge(struct device_node *dev) { int len; -- cgit v1.1 From 1b9a93eb4638dcde0c3af42fd6c05e3911baa7db Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 29 Aug 2006 18:13:31 -0500 Subject: [POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Signed-off-by: Kim Phillips Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8349emds.dts | 328 ++++++++++++++++++++++++++++++++++ 1 file changed, 328 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8349emds.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts new file mode 100644 index 0000000..12f5dbf --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -0,0 +1,328 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8349EMDS"; + compatible = "MPC834xMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB at 0 + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 2>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 8 24 8 25 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + b000 0 0 1 700 15 8 + b000 0 0 2 700 16 8 + b000 0 0 3 700 17 8 + b000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + b000 0 0 1 700 15 8 + b000 0 0 2 700 16 8 + b000 0 0 3 700 17 8 + b000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <01010ebf>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; -- cgit v1.1 From 4b3afca9345f5beb9c607faeb2aef4f91dd91a13 Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Fri, 25 Aug 2006 16:43:25 +0800 Subject: [POWERPC] Add mpc7448hpc2 device tree source file This patch adds the mpc7448hpc2 device tree source file. Signed-off-by: Roy Zang Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc7448hpc2.dts | 190 ++++++++++++++++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc7448hpc2.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts new file mode 100644 index 0000000..d7b985e --- /dev/null +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -0,0 +1,190 @@ +/* + * MPC7448HPC2 (Taiga) board Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * 2006 Roy Zang . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "mpc7448hpc2"; + compatible = "mpc74xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells =<0>; + linux,phandle = <200>; + + PowerPC,7448@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K bytes + i-cache-size = <8000>; // L1, 32K bytes + timebase-frequency = <0>; // 33 MHz, from uboot + clock-frequency = <0>; // From U-Boot + bus-frequency = <0>; // From U-Boot + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 20000000 // DDR2 512M at 0 + >; + }; + + tsi108@c0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "tsi-bridge"; + ranges = <00000000 c0000000 00010000>; + reg = ; + bus-frequency = <0>; + + i2c@7000 { + interrupt-parent = <7400>; + interrupts = ; + reg = <7000 400>; + device_type = "i2c"; + compatible = "tsi-i2c"; + }; + + mdio@6000 { + device_type = "mdio"; + compatible = "tsi-ethernet"; + + ethernet-phy@6000 { + linux,phandle = <6000>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <8>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@6400 { + linux,phandle = <6400>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <9>; + device_type = "ethernet-phy"; + }; + + }; + + ethernet@6200 { + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6000 200>; + address = [ 00 06 D2 00 00 01 ]; + interrupts = <10 2>; + interrupt-parent = <7400>; + phy-handle = <6000>; + }; + + ethernet@6600 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6400 200>; + address = [ 00 06 D2 00 00 02 ]; + interrupts = <11 2>; + interrupt-parent = <7400>; + phy-handle = <6400>; + }; + + serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7808 200>; + clock-frequency = <3f6b5a00>; + interrupts = ; + interrupt-parent = <7400>; + }; + + serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7c08 200>; + clock-frequency = <3f6b5a00>; + interrupts = ; + interrupt-parent = <7400>; + }; + + pic@7400 { + linux,phandle = <7400>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <7400 400>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + pci@1000 { + compatible = "tsi10x"; + device_type = "pci"; + linux,phandle = <1000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <1000 1000>; + bus-range = <0 0>; + ranges = <02000000 0 e0000000 e0000000 0 1A000000 + 01000000 0 00000000 fa000000 0 00010000>; + clock-frequency = <7f28154>; + interrupt-parent = <7400>; + interrupts = <17 2>; + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 0800 0 0 1 7400 24 0 + 0800 0 0 2 7400 25 0 + 0800 0 0 3 7400 26 0 + 0800 0 0 4 7400 27 0 + + /* IDSEL 0x12 */ + 1000 0 0 1 7400 25 0 + 1000 0 0 2 7400 26 0 + 1000 0 0 3 7400 27 0 + 1000 0 0 4 7400 24 0 + + /* IDSEL 0x13 */ + 1800 0 0 1 7400 26 0 + 1800 0 0 2 7400 27 0 + 1800 0 0 3 7400 24 0 + 1800 0 0 4 7400 25 0 + + /* IDSEL 0x14 */ + 2000 0 0 1 7400 27 0 + 2000 0 0 2 7400 24 0 + 2000 0 0 3 7400 25 0 + 2000 0 0 4 7400 26 0 + >; + }; + }; + +}; -- cgit v1.1 From 8ec8f2e85c6b88b4a1641eb3902275bcf2c6d60a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 28 Aug 2006 11:17:37 +1000 Subject: [POWERPC] Fix performance regression in IRQ radix tree locking When reworking the powerpc irq code, I figured out that we were using the radix tree in a racy way. As a temporary fix, I put a spinlock in there. However, this can have a significant impact on performances. This patch reworks that to use a smarter technique based on the fact that what we need is in fact a rwlock with extremely rare writers (thus optimized for the read path). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 84 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 66 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7ee6854..12c5971 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -322,7 +322,8 @@ EXPORT_SYMBOL(do_softirq); static LIST_HEAD(irq_hosts); static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED; - +static DEFINE_PER_CPU(unsigned int, irq_radix_reader); +static unsigned int irq_radix_writer; struct irq_map_entry irq_map[NR_IRQS]; static unsigned int irq_virq_count = NR_IRQS; static struct irq_host *irq_default_host; @@ -455,6 +456,58 @@ void irq_set_virq_count(unsigned int count) irq_virq_count = count; } +/* radix tree not lockless safe ! we use a brlock-type mecanism + * for now, until we can use a lockless radix tree + */ +static void irq_radix_wrlock(unsigned long *flags) +{ + unsigned int cpu, ok; + + spin_lock_irqsave(&irq_big_lock, *flags); + irq_radix_writer = 1; + smp_mb(); + do { + barrier(); + ok = 1; + for_each_possible_cpu(cpu) { + if (per_cpu(irq_radix_reader, cpu)) { + ok = 0; + break; + } + } + if (!ok) + cpu_relax(); + } while(!ok); +} + +static void irq_radix_wrunlock(unsigned long flags) +{ + smp_wmb(); + irq_radix_writer = 0; + spin_unlock_irqrestore(&irq_big_lock, flags); +} + +static void irq_radix_rdlock(unsigned long *flags) +{ + local_irq_save(*flags); + __get_cpu_var(irq_radix_reader) = 1; + smp_mb(); + if (likely(irq_radix_writer == 0)) + return; + __get_cpu_var(irq_radix_reader) = 0; + smp_wmb(); + spin_lock(&irq_big_lock); + __get_cpu_var(irq_radix_reader) = 1; + spin_unlock(&irq_big_lock); +} + +static void irq_radix_rdunlock(unsigned long flags) +{ + __get_cpu_var(irq_radix_reader) = 0; + local_irq_restore(flags); +} + + unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) { @@ -604,13 +657,9 @@ void irq_dispose_mapping(unsigned int virq) /* Check if radix tree allocated yet */ if (host->revmap_data.tree.gfp_mask == 0) break; - /* XXX radix tree not safe ! remove lock whem it becomes safe - * and use some RCU sync to make sure everything is ok before we - * can re-use that map entry - */ - spin_lock_irqsave(&irq_big_lock, flags); + irq_radix_wrlock(&flags); radix_tree_delete(&host->revmap_data.tree, hwirq); - spin_unlock_irqrestore(&irq_big_lock, flags); + irq_radix_wrunlock(flags); break; } @@ -677,25 +726,24 @@ unsigned int irq_radix_revmap(struct irq_host *host, if (tree->gfp_mask == 0) return irq_find_mapping(host, hwirq); - /* XXX Current radix trees are NOT SMP safe !!! Remove that lock - * when that is fixed (when Nick's patch gets in - */ - spin_lock_irqsave(&irq_big_lock, flags); - /* Now try to resolve */ + irq_radix_rdlock(&flags); ptr = radix_tree_lookup(tree, hwirq); + irq_radix_rdunlock(flags); + /* Found it, return */ if (ptr) { virq = ptr - irq_map; - goto bail; + return virq; } /* If not there, try to insert it */ virq = irq_find_mapping(host, hwirq); - if (virq != NO_IRQ) + if (virq != NO_IRQ) { + irq_radix_wrlock(&flags); radix_tree_insert(tree, hwirq, &irq_map[virq]); - bail: - spin_unlock_irqrestore(&irq_big_lock, flags); + irq_radix_wrunlock(flags); + } return virq; } @@ -806,12 +854,12 @@ static int irq_late_init(void) struct irq_host *h; unsigned long flags; - spin_lock_irqsave(&irq_big_lock, flags); + irq_radix_wrlock(&flags); list_for_each_entry(h, &irq_hosts, link) { if (h->revmap_type == IRQ_HOST_MAP_TREE) INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC); } - spin_unlock_irqrestore(&irq_big_lock, flags); + irq_radix_wrunlock(flags); return 0; } -- cgit v1.1 From 7233593b7844c2db930594ee9c0c872a6900bfcc Mon Sep 17 00:00:00 2001 From: Zang Roy-r61911 Date: Fri, 25 Aug 2006 14:16:30 +1000 Subject: [POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2 This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: Roy Zang Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 20 +- arch/powerpc/platforms/embedded6xx/Kconfig | 1 + arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 2 +- arch/powerpc/sysdev/mpic.c | 223 ++++++++++++++++------ 4 files changed, 180 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index abb325e..4d4b6fb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -354,6 +354,7 @@ endchoice config PPC_PSERIES depends on PPC_MULTIPLATFORM && PPC64 bool "IBM pSeries & new (POWER5-based) iSeries" + select MPIC select PPC_I8259 select PPC_RTAS select RTAS_ERROR_LOGGING @@ -363,6 +364,7 @@ config PPC_PSERIES config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines" depends on PPC_MULTIPLATFORM && PPC32 + select MPIC select PPC_I8259 select PPC_INDIRECT_PCI select PPC_RTAS @@ -373,6 +375,7 @@ config PPC_CHRP config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_MULTIPLATFORM + select MPIC select PPC_INDIRECT_PCI if PPC32 select PPC_MPC106 if PPC32 default y @@ -380,6 +383,7 @@ config PPC_PMAC config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 + select MPIC select U3_DART select MPIC_BROKEN_U3 select GENERIC_TBSYNC @@ -389,6 +393,7 @@ config PPC_PMAC64 config PPC_PREP bool "PowerPC Reference Platform (PReP) based machines" depends on PPC_MULTIPLATFORM && PPC32 && BROKEN + select MPIC select PPC_I8259 select PPC_INDIRECT_PCI select PPC_UDBG_16550 @@ -397,6 +402,7 @@ config PPC_PREP config PPC_MAPLE depends on PPC_MULTIPLATFORM && PPC64 bool "Maple 970FX Evaluation Board" + select MPIC select U3_DART select MPIC_BROKEN_U3 select GENERIC_TBSYNC @@ -439,12 +445,6 @@ config U3_DART depends on PPC_MULTIPLATFORM && PPC64 default n -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \ - || MPC7448HPC2 - bool - default y - config PPC_RTAS bool default n @@ -812,6 +812,14 @@ config GENERIC_ISA_DMA depends on PPC64 || POWER4 || 6xx && !CPM2 default y +config MPIC + bool + default n + +config MPIC_WEIRD + bool + default n + config PPC_I8259 bool default n diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index ba07a9a..234a861 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -80,6 +80,7 @@ config MPC7448HPC2 select DEFAULT_UIMAGE select PPC_UDBG_16550 select MPIC + select MPIC_WEIRD help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index ed00ed2..5d393eb 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -215,7 +215,7 @@ static void __init mpc7448_hpc2_init_IRQ(void) mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | - MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), + MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 0, /* num_sources used */ 0, /* num_sources used */ "Tsi108_PIC"); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 6e0281a..b604926 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,6 +54,94 @@ static DEFINE_SPINLOCK(mpic_lock); #endif #endif +#ifdef CONFIG_MPIC_WEIRD +static u32 mpic_infos[][MPIC_IDX_END] = { + [0] = { /* Original OpenPIC compatible MPIC */ + MPIC_GREG_BASE, + MPIC_GREG_FEATURE_0, + MPIC_GREG_GLOBAL_CONF_0, + MPIC_GREG_VENDOR_ID, + MPIC_GREG_IPI_VECTOR_PRI_0, + MPIC_GREG_IPI_STRIDE, + MPIC_GREG_SPURIOUS, + MPIC_GREG_TIMER_FREQ, + + MPIC_TIMER_BASE, + MPIC_TIMER_STRIDE, + MPIC_TIMER_CURRENT_CNT, + MPIC_TIMER_BASE_CNT, + MPIC_TIMER_VECTOR_PRI, + MPIC_TIMER_DESTINATION, + + MPIC_CPU_BASE, + MPIC_CPU_STRIDE, + MPIC_CPU_IPI_DISPATCH_0, + MPIC_CPU_IPI_DISPATCH_STRIDE, + MPIC_CPU_CURRENT_TASK_PRI, + MPIC_CPU_WHOAMI, + MPIC_CPU_INTACK, + MPIC_CPU_EOI, + + MPIC_IRQ_BASE, + MPIC_IRQ_STRIDE, + MPIC_IRQ_VECTOR_PRI, + MPIC_VECPRI_VECTOR_MASK, + MPIC_VECPRI_POLARITY_POSITIVE, + MPIC_VECPRI_POLARITY_NEGATIVE, + MPIC_VECPRI_SENSE_LEVEL, + MPIC_VECPRI_SENSE_EDGE, + MPIC_VECPRI_POLARITY_MASK, + MPIC_VECPRI_SENSE_MASK, + MPIC_IRQ_DESTINATION + }, + [1] = { /* Tsi108/109 PIC */ + TSI108_GREG_BASE, + TSI108_GREG_FEATURE_0, + TSI108_GREG_GLOBAL_CONF_0, + TSI108_GREG_VENDOR_ID, + TSI108_GREG_IPI_VECTOR_PRI_0, + TSI108_GREG_IPI_STRIDE, + TSI108_GREG_SPURIOUS, + TSI108_GREG_TIMER_FREQ, + + TSI108_TIMER_BASE, + TSI108_TIMER_STRIDE, + TSI108_TIMER_CURRENT_CNT, + TSI108_TIMER_BASE_CNT, + TSI108_TIMER_VECTOR_PRI, + TSI108_TIMER_DESTINATION, + + TSI108_CPU_BASE, + TSI108_CPU_STRIDE, + TSI108_CPU_IPI_DISPATCH_0, + TSI108_CPU_IPI_DISPATCH_STRIDE, + TSI108_CPU_CURRENT_TASK_PRI, + TSI108_CPU_WHOAMI, + TSI108_CPU_INTACK, + TSI108_CPU_EOI, + + TSI108_IRQ_BASE, + TSI108_IRQ_STRIDE, + TSI108_IRQ_VECTOR_PRI, + TSI108_VECPRI_VECTOR_MASK, + TSI108_VECPRI_POLARITY_POSITIVE, + TSI108_VECPRI_POLARITY_NEGATIVE, + TSI108_VECPRI_SENSE_LEVEL, + TSI108_VECPRI_SENSE_EDGE, + TSI108_VECPRI_POLARITY_MASK, + TSI108_VECPRI_SENSE_MASK, + TSI108_IRQ_DESTINATION + }, +}; + +#define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] + +#else /* CONFIG_MPIC_WEIRD */ + +#define MPIC_INFO(name) MPIC_##name + +#endif /* CONFIG_MPIC_WEIRD */ + /* * Register accessor functions */ @@ -80,7 +168,8 @@ static inline void _mpic_write(unsigned int be, volatile u32 __iomem *base, static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) { unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0; - unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); + unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); if (mpic->flags & MPIC_BROKEN_IPI) be = !be; @@ -89,7 +178,8 @@ static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) { - unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); + unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value); } @@ -120,7 +210,7 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne unsigned int idx = src_no & mpic->isu_mask; return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], - reg + (idx * MPIC_IRQ_STRIDE)); + reg + (idx * MPIC_INFO(IRQ_STRIDE))); } static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -130,7 +220,7 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, unsigned int idx = src_no & mpic->isu_mask; _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], - reg + (idx * MPIC_IRQ_STRIDE), value); + reg + (idx * MPIC_INFO(IRQ_STRIDE)), value); } #define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r)) @@ -156,8 +246,8 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic) { u32 r; - mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK); - r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0); + mpic_write(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0), MPIC_VECPRI_MASK); + r = mpic_read(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0)); if (r == le32_to_cpu(MPIC_VECPRI_MASK)) { printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); @@ -394,8 +484,8 @@ static inline struct mpic * mpic_from_irq(unsigned int irq) /* Send an EOI */ static inline void mpic_eoi(struct mpic *mpic) { - mpic_cpu_write(MPIC_CPU_EOI, 0); - (void)mpic_cpu_read(MPIC_CPU_WHOAMI); + mpic_cpu_write(MPIC_INFO(CPU_EOI), 0); + (void)mpic_cpu_read(MPIC_INFO(CPU_WHOAMI)); } #ifdef CONFIG_SMP @@ -419,8 +509,8 @@ static void mpic_unmask_irq(unsigned int irq) DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), + mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & ~MPIC_VECPRI_MASK); /* make sure mask gets to controller before we return to user */ do { @@ -428,7 +518,7 @@ static void mpic_unmask_irq(unsigned int irq) printk(KERN_ERR "mpic_enable_irq timeout\n"); break; } - } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); + } while(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK); } static void mpic_mask_irq(unsigned int irq) @@ -439,8 +529,8 @@ static void mpic_mask_irq(unsigned int irq) DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), + mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) | MPIC_VECPRI_MASK); /* make sure mask gets to controller before we return to user */ @@ -449,7 +539,7 @@ static void mpic_mask_irq(unsigned int irq) printk(KERN_ERR "mpic_enable_irq timeout\n"); break; } - } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); + } while(!(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK)); } static void mpic_end_irq(unsigned int irq) @@ -560,24 +650,28 @@ static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) cpus_and(tmp, cpumask, cpu_online_map); - mpic_irq_write(src, MPIC_IRQ_DESTINATION, + mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), mpic_physmask(cpus_addr(tmp)[0])); } -static unsigned int mpic_type_to_vecpri(unsigned int type) +static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) { /* Now convert sense value */ switch(type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_RISING: - return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_POSITIVE; + return MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE); case IRQ_TYPE_EDGE_FALLING: case IRQ_TYPE_EDGE_BOTH: - return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_NEGATIVE; + return MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE); case IRQ_TYPE_LEVEL_HIGH: - return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_POSITIVE; + return MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE); case IRQ_TYPE_LEVEL_LOW: default: - return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE; + return MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE); } } @@ -609,13 +703,14 @@ static int mpic_set_irq_type(unsigned int virq, unsigned int flow_type) vecpri = MPIC_VECPRI_POLARITY_POSITIVE | MPIC_VECPRI_SENSE_EDGE; else - vecpri = mpic_type_to_vecpri(flow_type); + vecpri = mpic_type_to_vecpri(mpic, flow_type); - vold = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI); - vnew = vold & ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK); + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); vnew |= vecpri; if (vold != vnew) - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, vnew); + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew); return 0; } @@ -798,17 +893,22 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->irq_count = irq_count; mpic->num_sources = 0; /* so far */ +#ifdef CONFIG_MPIC_WEIRD + mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)]; +#endif + /* Map the global registers */ - mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000); - mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2); + mpic->gregs = ioremap(phys_addr + MPIC_INFO(GREG_BASE), 0x1000); + mpic->tmregs = mpic->gregs + + ((MPIC_INFO(TIMER_BASE) - MPIC_INFO(GREG_BASE)) >> 2); BUG_ON(mpic->gregs == NULL); /* Reset */ if (flags & MPIC_WANTS_RESET) { - mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, - mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) | MPIC_GREG_GCONF_RESET); - while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) + while( mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) & MPIC_GREG_GCONF_RESET) mb(); } @@ -817,7 +917,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, * MPICs, num sources as well. On ISU MPICs, sources are counted * as ISUs are added */ - reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0); + reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK) >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) @@ -826,16 +926,16 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE + - i * MPIC_CPU_STRIDE, 0x1000); + mpic->cpuregs[i] = ioremap(phys_addr + MPIC_INFO(CPU_BASE) + + i * MPIC_INFO(CPU_STRIDE), 0x1000); BUG_ON(mpic->cpuregs[i] == NULL); } /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE, - MPIC_IRQ_STRIDE * mpic->isu_size); + mpic->isus[0] = ioremap(phys_addr + MPIC_INFO(IRQ_BASE), + MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); BUG_ON(mpic->isus[0] == NULL); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -879,7 +979,8 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size); + mpic->isus[isu_num] = ioremap(phys_addr, + MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; } @@ -904,14 +1005,16 @@ void __init mpic_init(struct mpic *mpic) printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); /* Set current processor priority to max */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); /* Initialize timers: just disable them all */ for (i = 0; i < 4; i++) { mpic_write(mpic->tmregs, - i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0); + i * MPIC_INFO(TIMER_STRIDE) + + MPIC_INFO(TIMER_DESTINATION), 0); mpic_write(mpic->tmregs, - i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI, + i * MPIC_INFO(TIMER_STRIDE) + + MPIC_INFO(TIMER_VECTOR_PRI), MPIC_VECPRI_MASK | (MPIC_VEC_TIMER_0 + i)); } @@ -940,21 +1043,22 @@ void __init mpic_init(struct mpic *mpic) (8 << MPIC_VECPRI_PRIORITY_SHIFT); /* init hw */ - mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri); - mpic_irq_write(i, MPIC_IRQ_DESTINATION, + mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << hard_smp_processor_id()); } /* Init spurrious vector */ - mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS); + mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), MPIC_VEC_SPURRIOUS); - /* Disable 8259 passthrough */ - mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, - mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) - | MPIC_GREG_GCONF_8259_PTHROU_DIS); + /* Disable 8259 passthrough, if supported */ + if (!(mpic->flags & MPIC_NO_PTHROU_DIS)) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) + | MPIC_GREG_GCONF_8259_PTHROU_DIS); /* Set current processor priority to 0 */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); } void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) @@ -997,9 +1101,9 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) mpic_ipi_write(src - MPIC_VEC_IPI_0, reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } else { - reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) + reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & ~MPIC_VECPRI_PRIORITY_MASK; - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } spin_unlock_irqrestore(&mpic_lock, flags); @@ -1017,7 +1121,7 @@ unsigned int mpic_irq_get_priority(unsigned int irq) if (is_ipi) reg = mpic_ipi_read(src = MPIC_VEC_IPI_0); else - reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI); + reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); spin_unlock_irqrestore(&mpic_lock, flags); return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT; } @@ -1043,12 +1147,12 @@ void mpic_setup_this_cpu(void) */ if (distribute_irqs) { for (i = 0; i < mpic->num_sources ; i++) - mpic_irq_write(i, MPIC_IRQ_DESTINATION, - mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), + mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); } /* Set current processor priority to 0 */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); spin_unlock_irqrestore(&mpic_lock, flags); #endif /* CONFIG_SMP */ @@ -1058,7 +1162,7 @@ int mpic_cpu_get_priority(void) { struct mpic *mpic = mpic_primary; - return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI); + return mpic_cpu_read(MPIC_INFO(CPU_CURRENT_TASK_PRI)); } void mpic_cpu_set_priority(int prio) @@ -1066,7 +1170,7 @@ void mpic_cpu_set_priority(int prio) struct mpic *mpic = mpic_primary; prio &= MPIC_CPU_TASKPRI_MASK; - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); } /* @@ -1088,11 +1192,11 @@ void mpic_teardown_this_cpu(int secondary) /* let the mpic know we don't want intrs. */ for (i = 0; i < mpic->num_sources ; i++) - mpic_irq_write(i, MPIC_IRQ_DESTINATION, - mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), + mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) & ~msk); /* Set current processor priority to max */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); spin_unlock_irqrestore(&mpic_lock, flags); } @@ -1108,7 +1212,8 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); #endif - mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10, + mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) + + ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE), mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); } @@ -1116,7 +1221,7 @@ unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) { u32 src; - src = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK; + src = mpic_cpu_read(MPIC_INFO(CPU_INTACK)) & MPIC_INFO(VECPRI_VECTOR_MASK); #ifdef DEBUG_LOW DBG("%s: get_one_irq(): %d\n", mpic->name, src); #endif -- cgit v1.1 From 006b64de607f895de2ba1e21d3179cddf059128f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 25 Aug 2006 14:46:23 +1000 Subject: [POWERPC] Make OF irq map code detect more error cases Device-tree bugs on js20 with some versions of SLOF were causing the interrupt for IDE to not be parsed correctly and fail to boot. This patch adds a bit more sanity checking to the parser to detect some of those errors and fail instead of returning bogus information. The powerpc PCI code can then trigger a fallback that works on those machines. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 11 +++++++++-- arch/powerpc/kernel/prom_parse.c | 17 +++++++++++++---- 2 files changed, 22 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 2fce773..138134c 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1289,6 +1289,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev) DBG("Try to map irq for %s...\n", pci_name(pci_dev)); +#ifdef DEBUG + memset(&oirq, 0xff, sizeof(oirq)); +#endif /* Try to get a mapping from the device-tree */ if (of_irq_map_pci(pci_dev, &oirq)) { u8 line, pin; @@ -1314,8 +1317,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev) if (virq != NO_IRQ) set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); } else { - DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", - oirq.size, oirq.specifier[0], oirq.controller->full_name); + DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.specifier[1], + oirq.controller->full_name); virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); @@ -1324,6 +1328,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev) DBG(" -> failed to map !\n"); return -1; } + + DBG(" -> mapped to linux irq %d\n", virq); + pci_dev->irq = virq; pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq); diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 11052c2..a10825a 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -639,14 +639,17 @@ void of_irq_map_init(unsigned int flags) } -int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr, - struct of_irq *out_irq) +int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 ointsize, + u32 *addr, struct of_irq *out_irq) { struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; u32 *tmp, *imap, *imask; u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; int imaplen, match, i; + DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", + parent->full_name, intspec[0], intspec[1], ointsize); + ipar = of_node_get(parent); /* First get the #interrupt-cells property of the current cursor @@ -670,6 +673,9 @@ int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr, DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize); + if (ointsize != intsize) + return -EINVAL; + /* Look for this #address-cells. We have to implement the old linux * trick of looking for the parent here as some device-trees rely on it */ @@ -875,12 +881,15 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq } intsize = *tmp; + DBG(" intsize=%d intlen=%d\n", intsize, intlen); + /* Check index */ if ((index + 1) * intsize > intlen) return -EINVAL; /* Get new specifier and map it */ - res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq); + res = of_irq_map_raw(p, intspec + index * intsize, intsize, + addr, out_irq); of_node_put(p); return res; } @@ -965,7 +974,7 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) laddr[0] = (pdev->bus->number << 16) | (pdev->devfn << 8); laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_map_pci); #endif /* CONFIG_PCI */ -- cgit v1.1 From 11e9ed43ca8a741c2858c33d12120cf8817d3bff Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Fri, 25 Aug 2006 15:46:59 -0500 Subject: [POWERPC] Fix up ibm_architecture_vec definition This problem was noticed by one of the Phyp firmware folks. Our ibm,client-architecture-support call was failing. This corrects the vector length parameters being passed in. Signed-off-by: Will Schmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 462bced..4394e54 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -646,13 +646,13 @@ static unsigned char ibm_architecture_vec[] = { 5 - 1, /* 5 option vectors */ /* option vector 1: processor architectures supported */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | OV1_PPC_2_04 | OV1_PPC_2_05, /* option vector 2: Open Firmware options supported */ - 34 - 1, /* length */ + 34 - 2, /* length */ OV2_REAL_MODE, 0, 0, W(0xffffffff), /* real_base */ @@ -666,16 +666,16 @@ static unsigned char ibm_architecture_vec[] = { 48, /* max log_2(hash table size) */ /* option vector 3: processor options supported */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV3_FP | OV3_VMX, /* option vector 4: IBM PAPR implementation */ - 2 - 1, /* length */ + 2 - 2, /* length */ 0, /* don't halt */ /* option vector 5: PAPR/OF options */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, }; -- cgit v1.1 From fea23bfefb4e98efd3c36f00ccc0b60281dc99da Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 30 Aug 2006 14:45:35 +1000 Subject: [POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.S This code got moved from head.S but the copyright notice on head.S didn't get transferred with it. Noticed by Cort Dougan . Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/fpu.S | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 7e2c9fe..821e152 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -2,6 +2,11 @@ * FPU support code, moved here from head.S so that it can be used * by chips which use other head-whatever.S files. * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Copyright (C) 1996 Cort Dougan + * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version -- cgit v1.1 From e0d872d536bb93335d5905b09fe374a163486d43 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 30 Aug 2006 15:55:32 +1000 Subject: [POWERPC] Fix problem with time not advancing on 32-bit platforms This fixes a problem introduced in 5db9fa9593e2ff69f2b95f9d59229dc4faaa564d. The last_jiffy per-cpu variable is only 32 bits on 32-bit machines, but it was being compared with a 64-bit quantity (tb_next_jiffy), which resulted in time not advancing. This fixes it by changing last_jiffy to be 64 bits on all platforms. With this, we no longer need tb_last_stamp as a 32-bit version of tb_last_jiffy, so this gets rid of tb_last_stamp and we just use tb_last_jiffy instead. This also fixes a bug when the boot cpu is not online, because using tb_last_stamp could have caused the wrong timebase origin value to be used when calculating the time of day. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 18e59e4..a124499 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -125,15 +125,8 @@ static long timezone_offset; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; -u64 tb_last_jiffy __cacheline_aligned_in_smp; -unsigned long tb_last_stamp; - -/* - * Note that on ppc32 this only stores the bottom 32 bits of - * the timebase value, but that's enough to tell when a jiffy - * has passed. - */ -DEFINE_PER_CPU(unsigned long, last_jiffy); +static u64 tb_last_jiffy __cacheline_aligned_in_smp; +static DEFINE_PER_CPU(u64, last_jiffy); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* @@ -458,7 +451,7 @@ void do_gettimeofday(struct timeval *tv) do { seq = read_seqbegin_irqsave(&xtime_lock, flags); sec = xtime.tv_sec; - nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp); + nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); usec = nsec / 1000; while (usec >= 1000000) { @@ -700,7 +693,6 @@ void timer_interrupt(struct pt_regs * regs) tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { tb_last_jiffy = tb_next_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); do_timer(regs); timer_recalc_offset(tb_last_jiffy); timer_check_rtc(); @@ -749,7 +741,7 @@ void __init smp_space_timers(unsigned int max_cpus) int i; unsigned long half = tb_ticks_per_jiffy / 2; unsigned long offset = tb_ticks_per_jiffy / max_cpus; - unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + u64 previous_tb = per_cpu(last_jiffy, boot_cpuid); /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ previous_tb -= tb_ticks_per_jiffy; @@ -830,7 +822,7 @@ int do_settimeofday(struct timespec *tv) * and therefore the (jiffies - wall_jiffies) computation * has been removed. */ - tb_delta = tb_ticks_since(tb_last_stamp); + tb_delta = tb_ticks_since(tb_last_jiffy); tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */ new_nsec -= SCALE_XSEC(tb_delta, 1000000000); @@ -950,8 +942,7 @@ void __init time_init(void) if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ ppc_tb_freq = 1000000000; - tb_last_stamp = get_rtcl(); - tb_last_jiffy = tb_last_stamp; + tb_last_jiffy = get_rtcl(); } else { /* Normal PowerPC with timebase register */ ppc_md.calibrate_decr(); @@ -959,7 +950,7 @@ void __init time_init(void) ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); - tb_last_stamp = tb_last_jiffy = get_tb(); + tb_last_jiffy = get_tb(); } tb_ticks_per_jiffy = ppc_tb_freq / HZ; @@ -1036,7 +1027,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_jiffy; - __get_cpu_var(last_jiffy) = tb_last_stamp; + __get_cpu_var(last_jiffy) = tb_last_jiffy; do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; -- cgit v1.1 From 467c37801c453849a2fe243c3226476ee3985868 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 30 Aug 2006 16:10:47 +1000 Subject: [POWERPC] Fix irq enable/disable in smp_generic_take_timebase Eran Ben-Avi pointed out that the arch/ppc version of smp_generic_take_timebase disables interrupts on entry but exits without restoring them. However, both it and the arch/powerpc version have another problem, which is that they use local_irq_disable/enable rather than local_irq_save/restore, and they are called with interrupts disabled. This fixes both problems; it changes a return to a break in the arch/ppc version, and changes both versions to use local_irq_save/restore. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/smp-tbsync.c | 5 +++-- arch/ppc/kernel/smp-tbsync.c | 7 ++++--- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index f19e2e0..de59c6c 100644 --- a/arch/powerpc/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -45,8 +45,9 @@ void __devinit smp_generic_take_timebase(void) { int cmd; u64 tb; + unsigned long flags; - local_irq_disable(); + local_irq_save(flags); while (!running) barrier(); rmb(); @@ -70,7 +71,7 @@ void __devinit smp_generic_take_timebase(void) set_tb(tb >> 32, tb & 0xfffffffful); enter_contest(tbsync->mark, -1); } - local_irq_enable(); + local_irq_restore(flags); } static int __devinit start_contest(int cmd, long offset, int num) diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c index 1576758..d0cf3f8 100644 --- a/arch/ppc/kernel/smp-tbsync.c +++ b/arch/ppc/kernel/smp-tbsync.c @@ -47,8 +47,9 @@ void __devinit smp_generic_take_timebase( void ) { int cmd, tbl, tbu; + unsigned long flags; - local_irq_disable(); + local_irq_save(flags); while( !running ) ; rmb(); @@ -64,7 +65,7 @@ smp_generic_take_timebase( void ) tbu = tbsync->tbu; tbsync->ack = 0; if( cmd == kExit ) - return; + break; if( cmd == kSetAndTest ) { while( tbsync->handshake ) @@ -77,7 +78,7 @@ smp_generic_take_timebase( void ) } enter_contest( tbsync->mark, -1 ); } - local_irq_enable(); + local_irq_restore(flags); } static int __devinit -- cgit v1.1 From d0027bf09f09d95a23b8f476ba8cea28f2576781 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 31 Aug 2006 13:22:58 +1000 Subject: [POWERPC] Fix return value from memcpy As pointed out by Herbert Xu , our memcpy implementation didn't return the destination pointer as its return value, and there is code in the kernel that expects that. This fixes it. Signed-off-by: Paul Mackerras --- arch/powerpc/lib/memcpy_64.S | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index fd66acf..7173ba9 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -11,6 +11,7 @@ .align 7 _GLOBAL(memcpy) + std r3,48(r1) /* save destination pointer for return value */ mtcrf 0x01,r5 cmpldi cr1,r5,16 neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry @@ -38,7 +39,7 @@ _GLOBAL(memcpy) stdu r9,16(r3) bdnz 1b 3: std r8,8(r3) - beqlr + beq 3f addi r3,r3,16 ld r9,8(r4) .Ldo_tail: @@ -53,7 +54,8 @@ _GLOBAL(memcpy) 2: bf cr7*4+3,3f rotldi r9,r9,8 stb r9,0(r3) -3: blr +3: ld r3,48(r1) /* return dest pointer */ + blr .Lsrc_unaligned: srdi r6,r5,3 @@ -115,7 +117,7 @@ _GLOBAL(memcpy) 5: srd r12,r9,r11 or r12,r8,r12 std r12,24(r3) - beqlr + beq 4f cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 @@ -167,4 +169,5 @@ _GLOBAL(memcpy) 3: bf cr7*4+3,4f lbz r0,0(r4) stb r0,0(r3) -4: blr +4: ld r3,48(r1) /* return dest pointer */ + blr -- cgit v1.1