From d36deae75011a7890f0e730dd0f867c64081cb50 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Tue, 7 Sep 2010 21:14:39 +0000 Subject: qdio: extend API to allow polling Extend the qdio API to allow polling in the upper-layer driver. This is needed by qeth to use NAPI. To use the new interface the upper-layer driver must specify the queue_start_poll(). This callback is used to signal the upper-layer driver that is has initiative and must process the inbound queue by calling qdio_get_next_buffers(). If the upper-layer driver wants to stop polling it calls qdio_start_irq(). Since adapter interrupts are not completely stoppable qdio implements a software bit QDIO_QUEUE_IRQS_DISABLED to safely disable interrupts for an input queue. The old interface is preserved and will be used as is by zfcp. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- arch/s390/include/asm/qdio.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index 2ba6302..46e96bc 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -360,6 +360,7 @@ struct qdio_initialize { unsigned int no_output_qs; qdio_handler_t *input_handler; qdio_handler_t *output_handler; + void (*queue_start_poll) (struct ccw_device *, int, unsigned long); unsigned long int_parm; void **input_sbal_addr_array; void **output_sbal_addr_array; @@ -377,11 +378,13 @@ struct qdio_initialize { extern int qdio_allocate(struct qdio_initialize *); extern int qdio_establish(struct qdio_initialize *); extern int qdio_activate(struct ccw_device *); - -extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags, - int q_nr, unsigned int bufnr, unsigned int count); -extern int qdio_shutdown(struct ccw_device*, int); +extern int do_QDIO(struct ccw_device *, unsigned int, int, unsigned int, + unsigned int); +extern int qdio_start_irq(struct ccw_device *, int); +extern int qdio_stop_irq(struct ccw_device *, int); +extern int qdio_get_next_buffers(struct ccw_device *, int, int *, int *); +extern int qdio_shutdown(struct ccw_device *, int); extern int qdio_free(struct ccw_device *); -extern int qdio_get_ssqd_desc(struct ccw_device *dev, struct qdio_ssqd_desc*); +extern int qdio_get_ssqd_desc(struct ccw_device *, struct qdio_ssqd_desc *); #endif /* __QDIO_H__ */ -- cgit v1.1 From c1f9a095600e07fefe64eb94eb711f410100824a Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 16 Sep 2010 13:16:02 +0200 Subject: wl12xx: make wl12xx.h common to both spi and sdio Move wl12xx.h outside of the spi-specific location, so it can be shared with both spi and sdio solutions. Update all users of spi/wl12xx.h accordingly Signed-off-by: Ohad Ben-Cohen Acked-by: Luciano Coelho Acked-by: Tony Lindgren Signed-off-by: John W. Linville --- arch/arm/mach-omap2/board-omap3pandora.c | 1 + arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index c0f4f12..9b62b62 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 0348392..1cf9942 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.1 From b642fde7f137566c993991fd2e7bf6b8274bf625 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 16 Sep 2010 01:32:09 +0200 Subject: omap: zoom: add fixed regulator device for wlan Add a fixed regulator vmmc device to enable power control of the wl1271 wlan device. Signed-off-by: Ohad Ben-Cohen Acked-by: Tony Lindgren Signed-off-by: John W. Linville --- arch/arm/mach-omap2/board-zoom-peripherals.c | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b39849..f5df9a2 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -27,6 +28,8 @@ #include "mux.h" #include "hsmmc.h" +#define OMAP_ZOOM_WLAN_PMENA_GPIO (101) + /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), @@ -106,6 +109,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = { .supply = "vmmc", }; +static struct regulator_consumer_supply zoom_vmmc3_supply = { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.2", +}; + /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data zoom_vmmc1 = { .constraints = { @@ -151,6 +159,32 @@ static struct regulator_init_data zoom_vsim = { .consumer_supplies = &zoom_vsim_supply, }; +static struct regulator_init_data zoom_vmmc3 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vmmc3_supply, +}; + +static struct fixed_voltage_config zoom_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = OMAP_ZOOM_WLAN_PMENA_GPIO, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &zoom_vmmc3, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &zoom_vwlan, + }, +}; + static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", @@ -280,6 +314,7 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { omap_i2c_init(); + platform_device_register(&omap_vwlan_device); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } -- cgit v1.1 From 80b517f362605f2b6a6cfe086604534290aab2de Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 16 Sep 2010 01:32:30 +0200 Subject: omap: zoom: add mmc3/wl1271 device support Add MMC3 support on ZOOM, which has the wl1271 device hardwired to. The wl1271 is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line, and power-controlled by a GPIO-based fixed regulator. Signed-off-by: Ohad Ben-Cohen Acked-by: Tony Lindgren Signed-off-by: John W. Linville --- arch/arm/mach-omap2/board-zoom-peripherals.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f5df9a2..6aa0728 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -29,6 +30,7 @@ #include "hsmmc.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) +#define OMAP_ZOOM_WLAN_IRQ_GPIO (162) /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { @@ -185,6 +187,12 @@ static struct platform_device omap_vwlan_device = { }, }; +struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), + /* ZOOM ref clock is 26 MHz */ + .board_ref_clock = 1, +}; + static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", @@ -202,6 +210,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .nonremovable = true, .power_saving = true, }, + { + .name = "wl1271", + .mmc = 3, + .wires = 4, + .gpio_wp = -EINVAL, + .gpio_cd = -EINVAL, + .nonremovable = true, + }, {} /* Terminator */ }; @@ -313,6 +329,9 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { + if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) + pr_err("error setting wl12xx data\n"); + omap_i2c_init(); platform_device_register(&omap_vwlan_device); usb_musb_init(&musb_board_data); -- cgit v1.1 From 4b48e6876b641e1138f37a0fc11fb6a4fc3e24e1 Mon Sep 17 00:00:00 2001 From: ext Anand Gadiyar Date: Fri, 1 Oct 2010 22:33:26 +0200 Subject: omap: zoom2/3: fix build caused by wl1271 support Patch "omap: zoom: add mmc3/wl1271 device support" in the wireless tree still uses .wires in struct omap2_hsmmc_info. .wires has now been replaced with .caps in patch "omap: mmc: extended to pass host capabilities from board file" in the OMAP tree. This causes linux-next as of 20101001 build to break as below. Fix this. CC arch/arm/mach-omap2/board-zoom-peripherals.o arch/arm/mach-omap2/board-zoom-peripherals.c:217: error: unknown field 'wires' specified in initializer make[1]: *** [arch/arm/mach-omap2/board-zoom-peripherals.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Anand Gadiyar Cc: Ohad Ben-Cohen Cc: Tony Lindgren Acked-by: Tony Lindgren Signed-off-by: Luciano Coelho --- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6aa0728..189a6d1 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -213,7 +213,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "wl1271", .mmc = 3, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .gpio_cd = -EINVAL, .nonremovable = true, -- cgit v1.1