From 7af36b9787e19b4cbde9ee984e431d64b586784e Mon Sep 17 00:00:00 2001 From: Sunyoung Kang Date: Sat, 18 Sep 2010 10:59:31 +0900 Subject: ARM: S5PV310: Update CMU registers for CPUFREQ This patch adds CMU(Clock Management Unit) registers for S5PV310/S5PC210 CPUFREQ driver and modifies some register names according to datasheet. Signed-off-by: Sunyoung Kang Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/clock.c | 12 ++-- arch/arm/mach-s5pv310/include/mach/regs-clock.h | 77 ++++++++++++++++++++++++- 2 files changed, 81 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c index 58c9d33..fdce2b4 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-s5pv310/clock.c @@ -244,7 +244,7 @@ static struct clksrc_clk clk_mout_corebus = { .id = -1, }, .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 }, + .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, }; static struct clksrc_clk clk_sclk_dmc = { @@ -253,7 +253,7 @@ static struct clksrc_clk clk_sclk_dmc = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, }; static struct clksrc_clk clk_aclk_cored = { @@ -262,7 +262,7 @@ static struct clksrc_clk clk_aclk_cored = { .id = -1, .parent = &clk_sclk_dmc.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, }; static struct clksrc_clk clk_aclk_corep = { @@ -271,7 +271,7 @@ static struct clksrc_clk clk_aclk_corep = { .id = -1, .parent = &clk_aclk_cored.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, }; static struct clksrc_clk clk_aclk_acp = { @@ -280,7 +280,7 @@ static struct clksrc_clk clk_aclk_acp = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, }; static struct clksrc_clk clk_pclk_acp = { @@ -289,7 +289,7 @@ static struct clksrc_clk clk_pclk_acp = { .id = -1, .parent = &clk_aclk_acp.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, }; /* Core list of CMU_TOP side */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h index f1028ca..9e9e44c 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -19,6 +19,12 @@ #define S5P_INFORM0 S5P_CLKREG(0x800) +#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) +#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) + +#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) +#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -58,6 +64,8 @@ #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) #define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) +#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) + #define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) #define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) @@ -66,8 +74,9 @@ #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) #define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) -#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200) -#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500) +#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) +#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) #define S5P_MPLL_LOCK S5P_CLKREG(0x14004) @@ -84,6 +93,70 @@ #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +/* APLL_LOCK */ +#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ + +/* APLL_CON0 */ +#define S5P_APLLCON0_ENABLE_SHIFT (31) +#define S5P_APLLCON0_LOCKED_SHIFT (29) +#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) + +/* CLK_SRC_CPU */ +#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) + +/* CLKDIV_CPU0 */ +#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) +#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) +#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) +#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) +#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) +#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) +#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) +#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) +#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) +#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) +#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) + +/* CLKDIV_DMC0 */ +#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) +#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) +#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) +#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) +#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) +#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) +#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) +#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) +#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) +#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) +#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) +#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) +#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) +#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) + +/* CLKDIV_TOP */ +#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) +#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) +#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) +#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) +#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) +#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) +#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) +#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) +#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) +#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) + +/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ +#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) +#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) +#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) +#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) + /* Compatibility defines */ #define S5P_EPLL_CON S5P_EPLL_CON0 -- cgit v1.1 From 09dc781e94b881d23e3c5da8c72d6832ae542938 Mon Sep 17 00:00:00 2001 From: Sangwook Ju Date: Wed, 22 Dec 2010 07:26:40 +0900 Subject: ARM: S5PV310: Define missing CMU register for CPUFREQ This patch adds missing CMU(Clock Management Unit) registers for updated S5PV310 CPUFREQ driver. Signed-off-by: Sangwook Ju Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/regs-clock.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h index 9e9e44c..b5c4ada 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -89,7 +89,9 @@ #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) #define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) +#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) #define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) +#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) @@ -100,6 +102,7 @@ #define S5P_APLLCON0_ENABLE_SHIFT (31) #define S5P_APLLCON0_LOCKED_SHIFT (29) #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) +#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) /* CLK_SRC_CPU */ #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) -- cgit v1.1 From dd0b7e20da906b40d55f24bb2dc21abd58ed3f55 Mon Sep 17 00:00:00 2001 From: Sunyoung Kang Date: Wed, 22 Dec 2010 07:21:17 +0900 Subject: ARM: S5PV310: Add DMC registers and map_desc This patch adds DMC io mapping for access it and adds registers. This is used in checking DRAM memory type. Signed-off-by: Sunyoung Kang Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/cpu.c | 5 +++++ arch/arm/mach-s5pv310/include/mach/map.h | 2 ++ arch/arm/mach-s5pv310/include/mach/regs-mem.h | 23 +++++++++++++++++++++++ 3 files changed, 30 insertions(+) create mode 100644 arch/arm/mach-s5pv310/include/mach/regs-mem.h (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index 82ce4aa..283dd75 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -73,6 +73,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_256, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV310_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_512K, diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 7acf4e7..37294f1 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -44,6 +44,8 @@ #define S5PV310_PA_WATCHDOG (0x10060000) #define S5PV310_PA_RTC (0x10070000) +#define S5PV310_PA_DMC0 (0x10400000) + #define S5PV310_PA_COMBINER (0x10448000) #define S5PV310_PA_COREPERI (0x10500000) diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-s5pv310/include/mach/regs-mem.h new file mode 100644 index 0000000..8342271 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-mem.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - SROMC and DMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MEM_H +#define __ASM_ARCH_REGS_MEM_H __FILE__ + +#include + +#define S5P_DMC0_MEMCON_OFFSET 0x04 + +#define S5P_DMC0_MEMTYPE_SHIFT 8 +#define S5P_DMC0_MEMTYPE_MASK 0xF + +#endif /* __ASM_ARCH_REGS_MEM_H */ -- cgit v1.1 From f40f91fefcf3a9049bcfa31ac53bc0e775444dab Mon Sep 17 00:00:00 2001 From: Sunyoung Kang Date: Thu, 16 Sep 2010 17:59:21 +0900 Subject: ARM: S5PV310: Add support CPUFREQ This patch adds support CPUFREQ driver for S5PV310 and S5PC210. This can support DVFS(Dynamic Voltage and Frequency Scaling). The voltage scaling depends on existence of regulator. Sigend-off-by: Sunyoung Kang Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/cpufreq.c | 561 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 561 insertions(+) create mode 100644 arch/arm/mach-s5pv310/cpufreq.c (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-s5pv310/cpufreq.c new file mode 100644 index 0000000..bcd4ebf --- /dev/null +++ b/arch/arm/mach-s5pv310/cpufreq.c @@ -0,0 +1,561 @@ +/* linux/arch/arm/mach-s5pv310/cpufreq.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +#ifdef CONFIG_REGULATOR +static struct regulator *arm_regulator; +static struct regulator *int_regulator; +#endif + +static struct cpufreq_freqs freqs; +static unsigned int armclk_use_apll; +static unsigned int memtype; + +enum s5pv310_memory_type { + DDR2 = 4, + LPDDR2, + DDR3, +}; + +enum cpufreq_level_index { + L0, L1, L2, L3, L4, CPUFREQ_LEVEL_END, +}; + +static struct cpufreq_frequency_table s5pv310_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 200*1000}, + {L4, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END + 1][7] = { + /* + * Clock divider value for following + * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, + * DIVATB, DIVPCLK_DBG, DIVAPLL } + */ + + /* ARM L0: 1000MHz */ + { 0, 3, 7, 3, 3, 0, 0 }, + + /* ARM L1: 800MHz */ + { 0, 3, 7, 3, 3, 0, 0 }, + + /* ARM L2: 400MHz */ + { 1, 1, 3, 1, 1, 0, 0 }, + + /* ARM L3: 200MHz */ + { 3, 0, 1, 0, 0, 0, 0 }, + + /* ARM L4A: 100MHz, for DDR2/3 */ + { 7, 0, 1, 0, 0, 0, 0 }, + + /* ARM L4B: 100MHz, for LPDDR2 (SMDKV310 has LPDDR2) */ + { 7, 0, 1, 0, 0, 0, 0 }, +}; + +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END + 1][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L1: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L2: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L3: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L4A: 400MHz, for DDR2/3 */ + { 7, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L4B: 200MHz, for LPDDR2 */ + { 7, 1, 1, 3, 1, 1, 3, 1 }, +}; + +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END + 1][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L1: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L2: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L3: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L4A: 100MHz */ + { 7, 7, 7, 7, 1 }, + + /* ACLK200 L4B: 100MHz */ + { 7, 7, 7, 7, 1 }, +}; + +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END + 1][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L2: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L3: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L4A: 100MHz */ + { 7, 1 }, + + /* ACLK_GDL/R L4B: 100MHz */ + { 7, 1 }, +}; + +struct cpufreq_voltage_table { + unsigned int index; /* any */ + unsigned int arm_volt; /* uV */ + unsigned int int_volt; +}; + +static struct cpufreq_voltage_table s5pv310_volt_table[] = { + { + .index = L0, + .arm_volt = 1200000, + .int_volt = 1100000, + }, { + .index = L1, + .arm_volt = 1100000, + .int_volt = 1100000, + }, { + .index = L2, + .arm_volt = 1050000, + .int_volt = 1100000, + }, { + .index = L3, + .arm_volt = 1050000, + .int_volt = 1100000, + }, { + .index = L4, + .arm_volt = 1000000, + .int_volt = 1000000, + }, +}; + +int s5pv310_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); +} + +unsigned int s5pv310_getspeed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +void s5pv310_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU); + + tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | + S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | + S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | + S5P_CLKDIV_CPU0_APLL_MASK); + + tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | + (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | + (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | + (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | + (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | + (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | + (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CPU); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - DMC0 */ + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | + (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | + (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); +} + +static int s5pv310_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index, div_index, tmp; + unsigned int arm_volt, int_volt; + unsigned int need_apll = 0; + + freqs.old = s5pv310_getspeed(policy->cpu); + + if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = s5pv310_freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.new == freqs.old) + return 0; + + /* + * If freqs.new is higher than 800MHz + * cpufreq driver should turn on apll + */ + if (index < L1) + need_apll = 1; + + /* If the memory type is LPDDR2, use L4-B instead of L4-A */ + if ((index == L4) && (memtype == LPDDR2)) + div_index = index + 1; + else + div_index = index; + + /* get the voltage value */ + arm_volt = s5pv310_volt_table[index].arm_volt; + int_volt = s5pv310_volt_table[index].int_volt; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* control regulator */ + if (freqs.new > freqs.old) { + /* Voltage up */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + /* Clock Configuration Procedure */ + + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(div_index); + + /* 2. Change the divider values for special clocks in CMU_TOP */ + /* currently nothing */ + + /* 3. Change the XPLL values or Select the parent XPLL */ + if (need_apll) { + if (!armclk_use_apll) { + /* + * If the parent clock of armclk isn't apll + * here need to set apll (include m,p,s value) + */ + + /* a. MUX_CORE_SEL = MPLL, + * ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* b. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* c. Change PLL PMS values */ + __raw_writel(S5P_APLL_VAL_1000, S5P_APLL_CON0); + + /* d. Turn on a PLL */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp |= (0x1 << S5P_APLLCON0_ENABLE_SHIFT); + __raw_writel(tmp, S5P_APLL_CON0); + + /* e. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + armclk_use_apll = 1; + + } + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); + + } else { + if (clk_get_parent(moutcore) != mout_mpll) { + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x2 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); + } + } + + /* control regulator */ + if (freqs.new < freqs.old) { + /* Voltage down */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +#ifdef CONFIG_PM +static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); + + cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); + + /* set the transition latency value */ + policy->cpuinfo.transition_latency = 100000; + + /* + * S5PV310 multi-core processors has 2 cores + * that the frequency cannot be set independently. + * Each cpu is bound to the same speed. + * So the affected cpu is all of the cpus. + */ + cpumask_setall(policy->cpus); + + return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); +} + +static struct cpufreq_driver s5pv310_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv310_verify_speed, + .target = s5pv310_target, + .get = s5pv310_getspeed, + .init = s5pv310_cpufreq_cpu_init, + .name = "s5pv310_cpufreq", +#ifdef CONFIG_PM + .suspend = s5pv310_cpufreq_suspend, + .resume = s5pv310_cpufreq_resume, +#endif +}; + +static int __init s5pv310_cpufreq_init(void) +{ + unsigned int tmp; + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto out; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto out; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto out; + +#ifdef CONFIG_REGULATOR + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); + goto out; + } + + int_regulator = regulator_get(NULL, "vdd_int"); + if (IS_ERR(int_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); + goto out; + } +#endif + + /* check parent clock of armclk */ + tmp = __raw_readl(S5P_CLKSRC_CPU); + if (tmp & S5P_CLKSRC_CPU_MUXCORE_SHIFT) + armclk_use_apll = 0; + else + armclk_use_apll = 1; + + /* + * Check DRAM type. + * Because DVFS level is different according to DRAM type. + */ + memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); + memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); + memtype &= S5P_DMC0_MEMTYPE_MASK; + + if ((memtype < DDR2) && (memtype > DDR3)) { + printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); + goto out; + } else { + printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); + } + + return cpufreq_register_driver(&s5pv310_driver); + +out: + if (!IS_ERR(cpu_clk)) + clk_put(cpu_clk); + + if (!IS_ERR(moutcore)) + clk_put(moutcore); + + if (!IS_ERR(mout_mpll)) + clk_put(mout_mpll); + + if (!IS_ERR(mout_apll)) + clk_put(mout_apll); + +#ifdef CONFIG_REGULATOR + if (!IS_ERR(arm_regulator)) + regulator_put(arm_regulator); + + if (!IS_ERR(int_regulator)) + regulator_put(int_regulator); +#endif + + printk(KERN_ERR "%s: failed initialization\n", __func__); + + return -EINVAL; +} +late_initcall(s5pv310_cpufreq_init); -- cgit v1.1 From bf5ce054f5ffdb9a2f5556edab07e86acec916ed Mon Sep 17 00:00:00 2001 From: Sangwook Ju Date: Wed, 22 Dec 2010 16:49:32 +0900 Subject: ARM: S5PV310: Update CPUFREQ This patch updates following of CPUFREQ. - Updated DVFS table and divider value - Added common function - Added some function for changing APLL and setting Signed-off-by: Sangwook Ju Reviewed-by: Jaecheol Lee Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/cpufreq.c | 301 +++++++++++++++++++++------------------- 1 file changed, 160 insertions(+), 141 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-s5pv310/cpufreq.c index bcd4ebf..b04cbc7 100644 --- a/arch/arm/mach-s5pv310/cpufreq.c +++ b/arch/arm/mach-s5pv310/cpufreq.c @@ -24,6 +24,7 @@ #include #include +#include static struct clk *cpu_clk; static struct clk *moutcore; @@ -36,7 +37,6 @@ static struct regulator *int_regulator; #endif static struct cpufreq_freqs freqs; -static unsigned int armclk_use_apll; static unsigned int memtype; enum s5pv310_memory_type { @@ -46,19 +46,18 @@ enum s5pv310_memory_type { }; enum cpufreq_level_index { - L0, L1, L2, L3, L4, CPUFREQ_LEVEL_END, + L0, L1, L2, L3, CPUFREQ_LEVEL_END, }; static struct cpufreq_frequency_table s5pv310_freq_table[] = { {L0, 1000*1000}, {L1, 800*1000}, {L2, 400*1000}, - {L3, 200*1000}, - {L4, 100*1000}, + {L3, 100*1000}, {0, CPUFREQ_TABLE_END}, }; -static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END + 1][7] = { +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { /* * Clock divider value for following * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, @@ -66,25 +65,38 @@ static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END + 1][7] = { */ /* ARM L0: 1000MHz */ - { 0, 3, 7, 3, 3, 0, 0 }, + { 0, 3, 7, 3, 3, 0, 1 }, /* ARM L1: 800MHz */ - { 0, 3, 7, 3, 3, 0, 0 }, + { 0, 3, 7, 3, 3, 0, 1 }, /* ARM L2: 400MHz */ - { 1, 1, 3, 1, 1, 0, 0 }, + { 0, 1, 3, 1, 3, 0, 1 }, - /* ARM L3: 200MHz */ - { 3, 0, 1, 0, 0, 0, 0 }, + /* ARM L3: 100MHz */ + { 0, 0, 1, 0, 3, 1, 1 }, +}; - /* ARM L4A: 100MHz, for DDR2/3 */ - { 7, 0, 1, 0, 0, 0, 0 }, +static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVCOPY, DIVHPM } + */ + + /* ARM L0: 1000MHz */ + { 3, 0 }, + + /* ARM L1: 800MHz */ + { 3, 0 }, - /* ARM L4B: 100MHz, for LPDDR2 (SMDKV310 has LPDDR2) */ - { 7, 0, 1, 0, 0, 0, 0 }, + /* ARM L2: 400MHz */ + { 3, 0 }, + + /* ARM L3: 100MHz */ + { 3, 0 }, }; -static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END + 1][8] = { +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { /* * Clock divider value for following * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD @@ -97,20 +109,14 @@ static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END + 1][8] = { /* DMC L1: 400MHz */ { 3, 1, 1, 1, 1, 1, 3, 1 }, - /* DMC L2: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L3: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L4A: 400MHz, for DDR2/3 */ - { 7, 1, 1, 1, 1, 1, 3, 1 }, + /* DMC L2: 266.7MHz */ + { 7, 1, 1, 2, 1, 1, 3, 1 }, - /* DMC L4B: 200MHz, for LPDDR2 */ + /* DMC L3: 200MHz */ { 7, 1, 1, 3, 1, 1, 3, 1 }, }; -static unsigned int clkdiv_top[CPUFREQ_LEVEL_END + 1][5] = { +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { /* * Clock divider value for following * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } @@ -122,20 +128,14 @@ static unsigned int clkdiv_top[CPUFREQ_LEVEL_END + 1][5] = { /* ACLK200 L1: 200MHz */ { 3, 7, 4, 5, 1 }, - /* ACLK200 L2: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L3: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L4A: 100MHz */ - { 7, 7, 7, 7, 1 }, + /* ACLK200 L2: 160MHz */ + { 4, 7, 5, 7, 1 }, - /* ACLK200 L4B: 100MHz */ - { 7, 7, 7, 7, 1 }, + /* ACLK200 L3: 133.3MHz */ + { 5, 7, 7, 7, 1 }, }; -static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END + 1][2] = { +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { /* * Clock divider value for following * { DIVGDL/R, DIVGPL/R } @@ -147,17 +147,11 @@ static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END + 1][2] = { /* ACLK_GDL/R L1: 200MHz */ { 3, 1 }, - /* ACLK_GDL/R L2: 200MHz */ - { 3, 1 }, - - /* ACLK_GDL/R L3: 200MHz */ - { 3, 1 }, + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, - /* ACLK_GDL/R L4A: 100MHz */ - { 7, 1 }, - - /* ACLK_GDL/R L4B: 100MHz */ - { 7, 1 }, + /* ACLK_GDL/R L3: 133.3MHz */ + { 5, 1 }, }; struct cpufreq_voltage_table { @@ -166,7 +160,7 @@ struct cpufreq_voltage_table { unsigned int int_volt; }; -static struct cpufreq_voltage_table s5pv310_volt_table[] = { +static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { { .index = L0, .arm_volt = 1200000, @@ -177,19 +171,29 @@ static struct cpufreq_voltage_table s5pv310_volt_table[] = { .int_volt = 1100000, }, { .index = L2, - .arm_volt = 1050000, - .int_volt = 1100000, + .arm_volt = 1000000, + .int_volt = 1000000, }, { .index = L3, - .arm_volt = 1050000, - .int_volt = 1100000, - }, { - .index = L4, - .arm_volt = 1000000, + .arm_volt = 900000, .int_volt = 1000000, }, }; +static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { + /* APLL FOUT L0: 1000MHz */ + ((250 << 16) | (6 << 8) | 1), + + /* APLL FOUT L1: 800MHz */ + ((200 << 16) | (6 << 8) | 1), + + /* APLL FOUT L2 : 400MHz */ + ((200 << 16) | (6 << 8) | 2), + + /* APLL FOUT L3: 100MHz */ + ((200 << 16) | (6 << 8) | 4), +}; + int s5pv310_verify_speed(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); @@ -227,6 +231,21 @@ void s5pv310_set_clkdiv(unsigned int div_index) tmp = __raw_readl(S5P_CLKDIV_STATCPU); } while (tmp & 0x1111111); + /* Change Divider - CPU1 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU1); + + tmp &= ~((0x7 << 4) | 0x7); + + tmp |= ((clkdiv_cpu1[div_index][0] << 4) | + (clkdiv_cpu1[div_index][1] << 0)); + + __raw_writel(tmp, S5P_CLKDIV_CPU1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU1); + } while (tmp & 0x11); + /* Change Divider - DMC0 */ tmp = __raw_readl(S5P_CLKDIV_DMC0); @@ -302,17 +321,101 @@ void s5pv310_set_clkdiv(unsigned int div_index) } while (tmp & 0x11); } +static void s5pv310_set_apll(unsigned int index) +{ + unsigned int tmp; + + /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* 2. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* 3. Change PLL PMS values */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); + tmp |= s5pv310_apll_pms_table[index]; + __raw_writel(tmp, S5P_APLL_CON0); + + /* 4. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + /* 5. MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index) +{ + unsigned int tmp; + + if (old_index > new_index) { + /* The frequency changing to L0 needs to change apll */ + if (freqs.new == s5pv310_freq_table[L0].frequency) { + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + + /* 2. Change the apll m,p,s value */ + s5pv310_set_apll(new_index); + } else { + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + + /* 2. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + } + } + + else if (old_index < new_index) { + /* The frequency changing from L0 needs to change apll */ + if (freqs.old == s5pv310_freq_table[L0].frequency) { + /* 1. Change the apll m,p,s value */ + s5pv310_set_apll(new_index); + + /* 2. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + } else { + /* 1. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + + /* 2. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + } + } +} + static int s5pv310_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int index, div_index, tmp; + unsigned int index, old_index; unsigned int arm_volt, int_volt; - unsigned int need_apll = 0; freqs.old = s5pv310_getspeed(policy->cpu); if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + freqs.old, relation, &old_index)) + return -EINVAL; + + if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, target_freq, relation, &index)) return -EINVAL; @@ -322,19 +425,6 @@ static int s5pv310_target(struct cpufreq_policy *policy, if (freqs.new == freqs.old) return 0; - /* - * If freqs.new is higher than 800MHz - * cpufreq driver should turn on apll - */ - if (index < L1) - need_apll = 1; - - /* If the memory type is LPDDR2, use L4-B instead of L4-A */ - if ((index == L4) && (memtype == LPDDR2)) - div_index = index + 1; - else - div_index = index; - /* get the voltage value */ arm_volt = s5pv310_volt_table[index].arm_volt; int_volt = s5pv310_volt_table[index].int_volt; @@ -351,69 +441,7 @@ static int s5pv310_target(struct cpufreq_policy *policy, } /* Clock Configuration Procedure */ - - /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(div_index); - - /* 2. Change the divider values for special clocks in CMU_TOP */ - /* currently nothing */ - - /* 3. Change the XPLL values or Select the parent XPLL */ - if (need_apll) { - if (!armclk_use_apll) { - /* - * If the parent clock of armclk isn't apll - * here need to set apll (include m,p,s value) - */ - - /* a. MUX_CORE_SEL = MPLL, - * ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = (__raw_readl(S5P_CLKMUX_STATCPU) - >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - /* b. Set APLL Lock time */ - __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); - - /* c. Change PLL PMS values */ - __raw_writel(S5P_APLL_VAL_1000, S5P_APLL_CON0); - - /* d. Turn on a PLL */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp |= (0x1 << S5P_APLLCON0_ENABLE_SHIFT); - __raw_writel(tmp, S5P_APLL_CON0); - - /* e. wait_lock_time */ - do { - tmp = __raw_readl(S5P_APLL_CON0); - } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); - - armclk_use_apll = 1; - - } - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - tmp = __raw_readl(S5P_CLKMUX_STATCPU); - tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); - - } else { - if (clk_get_parent(moutcore) != mout_mpll) { - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = __raw_readl(S5P_CLKMUX_STATCPU); - tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x2 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); - } - } + s5pv310_set_frequency(old_index, index); /* control regulator */ if (freqs.new < freqs.old) { @@ -477,8 +505,6 @@ static struct cpufreq_driver s5pv310_driver = { static int __init s5pv310_cpufreq_init(void) { - unsigned int tmp; - cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); @@ -509,13 +535,6 @@ static int __init s5pv310_cpufreq_init(void) } #endif - /* check parent clock of armclk */ - tmp = __raw_readl(S5P_CLKSRC_CPU); - if (tmp & S5P_CLKSRC_CPU_MUXCORE_SHIFT) - armclk_use_apll = 0; - else - armclk_use_apll = 1; - /* * Check DRAM type. * Because DVFS level is different according to DRAM type. -- cgit v1.1 From 877d1b571d7763dbf57e38de2827177ad5369e64 Mon Sep 17 00:00:00 2001 From: Jaecheol Lee Date: Thu, 23 Dec 2010 14:25:31 +0900 Subject: ARM: S5PV310: Add FOUT APLL get rate function FOUT APLL clock is used as a source of ARM core clock. So we need that the clock source can be changed dynamically by using CPUFREQ driver. This patch can give correct frequency when calling clk_get_rate() function. Signed-off-by: Jaecheol Lee Signed-off-by: Sangwook Ju Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/clock.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c index fdce2b4..752a07e 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-s5pv310/clock.c @@ -990,6 +990,17 @@ static struct clksrc_clk *sysclks[] = { &clk_dout_mmc4, }; +static int xtal_rate; + +static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); +} + +static struct clk_ops s5pv310_fout_apll_ops = { + .get_rate = s5pv310_fout_apll_get_rate, +}; + void __init_or_cpufreq s5pv310_setup_clocks(void) { struct clk *xtal_clk; @@ -1013,6 +1024,9 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) BUG_ON(IS_ERR(xtal_clk)); xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + clk_put(xtal_clk); printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); @@ -1026,7 +1040,7 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), __raw_readl(S5P_VPLL_CON1), pll_4650); - clk_fout_apll.rate = apll; + clk_fout_apll.ops = &s5pv310_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; -- cgit v1.1 From b333fb16dcc50541df1930addea3eac03c838a4c Mon Sep 17 00:00:00 2001 From: Sunyoung Kang Date: Thu, 16 Sep 2010 11:11:45 +0900 Subject: ARM: S5PV310: Update Kconfig and Makefile for supporting CPUFREQ This patch adds ARCH_HAS_CPUFREQ in Kconfig of ARCH_S5PV310 and updates Makefile for supporting build S5PV310 CPUFREQ driver. Signed-off-by: Sunyoung Kang Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 1 + arch/arm/mach-s5pv310/Makefile | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d56d21c..5ecaec6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -738,6 +738,7 @@ config ARCH_S5PV310 select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK + select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile index 84afc64..6a8a1ef 100644 --- a/arch/arm/mach-s5pv310/Makefile +++ b/arch/arm/mach-s5pv310/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -- cgit v1.1