From 9a163ed8e0552fdcffe405d2ea7134819a81456e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 11 Oct 2007 11:17:01 +0200 Subject: i386: move kernel Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/i386/Makefile | 11 +- arch/i386/kernel/.gitignore | 1 - arch/i386/kernel/Makefile | 5 - arch/i386/kernel/Makefile_32 | 88 - arch/i386/kernel/alternative.c | 450 ----- arch/i386/kernel/apic_32.c | 1566 ---------------- arch/i386/kernel/apm_32.c | 2403 ------------------------- arch/i386/kernel/asm-offsets.c | 5 - arch/i386/kernel/asm-offsets_32.c | 147 -- arch/i386/kernel/bootflag.c | 98 - arch/i386/kernel/cpuid.c | 242 --- arch/i386/kernel/crash_32.c | 137 -- arch/i386/kernel/crash_dump_32.c | 74 - arch/i386/kernel/doublefault_32.c | 70 - arch/i386/kernel/e820_32.c | 944 ---------- arch/i386/kernel/early_printk.c | 2 - arch/i386/kernel/efi_32.c | 712 -------- arch/i386/kernel/efi_stub_32.S | 122 -- arch/i386/kernel/entry_32.S | 1112 ------------ arch/i386/kernel/geode_32.c | 155 -- arch/i386/kernel/head_32.S | 578 ------ arch/i386/kernel/hpet_32.c | 553 ------ arch/i386/kernel/i386_ksyms_32.c | 30 - arch/i386/kernel/i387_32.c | 546 ------ arch/i386/kernel/i8237.c | 72 - arch/i386/kernel/i8253_32.c | 206 --- arch/i386/kernel/i8259_32.c | 420 ----- arch/i386/kernel/init_task_32.c | 46 - arch/i386/kernel/io_apic_32.c | 2847 ------------------------------ arch/i386/kernel/ioport_32.c | 153 -- arch/i386/kernel/irq_32.c | 343 ---- arch/i386/kernel/kprobes_32.c | 751 -------- arch/i386/kernel/ldt_32.c | 250 --- arch/i386/kernel/machine_kexec_32.c | 171 -- arch/i386/kernel/mca_32.c | 470 ----- arch/i386/kernel/microcode.c | 850 --------- arch/i386/kernel/module_32.c | 152 -- arch/i386/kernel/mpparse_32.c | 1132 ------------ arch/i386/kernel/msr.c | 224 --- arch/i386/kernel/nmi_32.c | 468 ----- arch/i386/kernel/numaq_32.c | 89 - arch/i386/kernel/paravirt_32.c | 392 ---- arch/i386/kernel/pci-dma_32.c | 177 -- arch/i386/kernel/pcspeaker.c | 20 - arch/i386/kernel/process_32.c | 951 ---------- arch/i386/kernel/ptrace_32.c | 723 -------- arch/i386/kernel/quirks.c | 49 - arch/i386/kernel/reboot_32.c | 413 ----- arch/i386/kernel/reboot_fixups_32.c | 68 - arch/i386/kernel/relocate_kernel_32.S | 252 --- arch/i386/kernel/scx200_32.c | 131 -- arch/i386/kernel/setup_32.c | 653 ------- arch/i386/kernel/sigframe_32.h | 21 - arch/i386/kernel/signal_32.c | 667 ------- arch/i386/kernel/smp_32.c | 707 -------- arch/i386/kernel/smpboot_32.c | 1322 -------------- arch/i386/kernel/smpcommon_32.c | 81 - arch/i386/kernel/srat_32.c | 360 ---- arch/i386/kernel/summit_32.c | 180 -- arch/i386/kernel/sys_i386_32.c | 265 --- arch/i386/kernel/syscall_table_32.S | 326 ---- arch/i386/kernel/sysenter_32.c | 348 ---- arch/i386/kernel/time_32.c | 236 --- arch/i386/kernel/topology.c | 77 - arch/i386/kernel/trampoline_32.S | 85 - arch/i386/kernel/traps_32.c | 1250 ------------- arch/i386/kernel/tsc_32.c | 413 ----- arch/i386/kernel/tsc_sync.c | 1 - arch/i386/kernel/vm86_32.c | 843 --------- arch/i386/kernel/vmi_32.c | 981 ---------- arch/i386/kernel/vmiclock_32.c | 320 ---- arch/i386/kernel/vmlinux.lds.S | 5 - arch/i386/kernel/vmlinux_32.lds.S | 213 --- arch/i386/kernel/vsyscall-int80_32.S | 53 - arch/i386/kernel/vsyscall-note_32.S | 45 - arch/i386/kernel/vsyscall-sigreturn_32.S | 143 -- arch/i386/kernel/vsyscall-sysenter_32.S | 122 -- arch/i386/kernel/vsyscall_32.S | 15 - arch/i386/kernel/vsyscall_32.lds.S | 67 - arch/um/sys-i386/sys_call_table.S | 2 +- arch/x86/kernel/.gitignore | 1 + arch/x86/kernel/Makefile | 5 + arch/x86/kernel/Makefile_32 | 88 + arch/x86/kernel/alternative.c | 450 +++++ arch/x86/kernel/apic_32.c | 1566 ++++++++++++++++ arch/x86/kernel/apm_32.c | 2403 +++++++++++++++++++++++++ arch/x86/kernel/asm-offsets.c | 5 + arch/x86/kernel/asm-offsets_32.c | 147 ++ arch/x86/kernel/bootflag.c | 98 + arch/x86/kernel/cpuid.c | 242 +++ arch/x86/kernel/crash_32.c | 137 ++ arch/x86/kernel/crash_dump_32.c | 74 + arch/x86/kernel/doublefault_32.c | 70 + arch/x86/kernel/e820_32.c | 944 ++++++++++ arch/x86/kernel/early_printk.c | 2 + arch/x86/kernel/efi_32.c | 712 ++++++++ arch/x86/kernel/efi_stub_32.S | 122 ++ arch/x86/kernel/entry_32.S | 1112 ++++++++++++ arch/x86/kernel/geode_32.c | 155 ++ arch/x86/kernel/head_32.S | 578 ++++++ arch/x86/kernel/hpet_32.c | 553 ++++++ arch/x86/kernel/i386_ksyms_32.c | 30 + arch/x86/kernel/i387_32.c | 546 ++++++ arch/x86/kernel/i8237.c | 72 + arch/x86/kernel/i8253_32.c | 206 +++ arch/x86/kernel/i8259_32.c | 420 +++++ arch/x86/kernel/init_task_32.c | 46 + arch/x86/kernel/io_apic_32.c | 2847 ++++++++++++++++++++++++++++++ arch/x86/kernel/ioport_32.c | 153 ++ arch/x86/kernel/irq_32.c | 343 ++++ arch/x86/kernel/kprobes_32.c | 751 ++++++++ arch/x86/kernel/ldt_32.c | 250 +++ arch/x86/kernel/machine_kexec_32.c | 171 ++ arch/x86/kernel/mca_32.c | 470 +++++ arch/x86/kernel/microcode.c | 850 +++++++++ arch/x86/kernel/module_32.c | 152 ++ arch/x86/kernel/mpparse_32.c | 1132 ++++++++++++ arch/x86/kernel/msr.c | 224 +++ arch/x86/kernel/nmi_32.c | 468 +++++ arch/x86/kernel/numaq_32.c | 89 + arch/x86/kernel/paravirt_32.c | 392 ++++ arch/x86/kernel/pci-dma_32.c | 177 ++ arch/x86/kernel/pcspeaker.c | 20 + arch/x86/kernel/process_32.c | 951 ++++++++++ arch/x86/kernel/ptrace_32.c | 723 ++++++++ arch/x86/kernel/quirks.c | 49 + arch/x86/kernel/reboot_32.c | 413 +++++ arch/x86/kernel/reboot_fixups_32.c | 68 + arch/x86/kernel/relocate_kernel_32.S | 252 +++ arch/x86/kernel/scx200_32.c | 131 ++ arch/x86/kernel/setup_32.c | 653 +++++++ arch/x86/kernel/sigframe_32.h | 21 + arch/x86/kernel/signal_32.c | 667 +++++++ arch/x86/kernel/smp_32.c | 707 ++++++++ arch/x86/kernel/smpboot_32.c | 1322 ++++++++++++++ arch/x86/kernel/smpcommon_32.c | 81 + arch/x86/kernel/srat_32.c | 360 ++++ arch/x86/kernel/summit_32.c | 180 ++ arch/x86/kernel/sys_i386_32.c | 265 +++ arch/x86/kernel/syscall_table_32.S | 326 ++++ arch/x86/kernel/sysenter_32.c | 348 ++++ arch/x86/kernel/time_32.c | 236 +++ arch/x86/kernel/topology.c | 77 + arch/x86/kernel/trampoline_32.S | 85 + arch/x86/kernel/traps_32.c | 1250 +++++++++++++ arch/x86/kernel/tsc_32.c | 413 +++++ arch/x86/kernel/tsc_sync.c | 1 + arch/x86/kernel/vm86_32.c | 843 +++++++++ arch/x86/kernel/vmi_32.c | 981 ++++++++++ arch/x86/kernel/vmiclock_32.c | 320 ++++ arch/x86/kernel/vmlinux.lds.S | 5 + arch/x86/kernel/vmlinux_32.lds.S | 213 +++ arch/x86/kernel/vsyscall-int80_32.S | 53 + arch/x86/kernel/vsyscall-note_32.S | 45 + arch/x86/kernel/vsyscall-sigreturn_32.S | 143 ++ arch/x86/kernel/vsyscall-sysenter_32.S | 122 ++ arch/x86/kernel/vsyscall_32.S | 15 + arch/x86/kernel/vsyscall_32.lds.S | 67 + arch/x86/mach-generic/Makefile | 2 +- arch/x86/mach-voyager/Makefile | 2 +- arch/x86_64/ia32/vsyscall-sigreturn.S | 2 +- arch/x86_64/kernel/Makefile | 2 +- arch/x86_64/kernel/Makefile_64 | 18 +- 163 files changed, 31682 insertions(+), 31675 deletions(-) delete mode 100644 arch/i386/kernel/.gitignore delete mode 100644 arch/i386/kernel/Makefile delete mode 100644 arch/i386/kernel/Makefile_32 delete mode 100644 arch/i386/kernel/alternative.c delete mode 100644 arch/i386/kernel/apic_32.c delete mode 100644 arch/i386/kernel/apm_32.c delete mode 100644 arch/i386/kernel/asm-offsets.c delete mode 100644 arch/i386/kernel/asm-offsets_32.c delete mode 100644 arch/i386/kernel/bootflag.c delete mode 100644 arch/i386/kernel/cpuid.c delete mode 100644 arch/i386/kernel/crash_32.c delete mode 100644 arch/i386/kernel/crash_dump_32.c delete mode 100644 arch/i386/kernel/doublefault_32.c delete mode 100644 arch/i386/kernel/e820_32.c delete mode 100644 arch/i386/kernel/early_printk.c delete mode 100644 arch/i386/kernel/efi_32.c delete mode 100644 arch/i386/kernel/efi_stub_32.S delete mode 100644 arch/i386/kernel/entry_32.S delete mode 100644 arch/i386/kernel/geode_32.c delete mode 100644 arch/i386/kernel/head_32.S delete mode 100644 arch/i386/kernel/hpet_32.c delete mode 100644 arch/i386/kernel/i386_ksyms_32.c delete mode 100644 arch/i386/kernel/i387_32.c delete mode 100644 arch/i386/kernel/i8237.c delete mode 100644 arch/i386/kernel/i8253_32.c delete mode 100644 arch/i386/kernel/i8259_32.c delete mode 100644 arch/i386/kernel/init_task_32.c delete mode 100644 arch/i386/kernel/io_apic_32.c delete mode 100644 arch/i386/kernel/ioport_32.c delete mode 100644 arch/i386/kernel/irq_32.c delete mode 100644 arch/i386/kernel/kprobes_32.c delete mode 100644 arch/i386/kernel/ldt_32.c delete mode 100644 arch/i386/kernel/machine_kexec_32.c delete mode 100644 arch/i386/kernel/mca_32.c delete mode 100644 arch/i386/kernel/microcode.c delete mode 100644 arch/i386/kernel/module_32.c delete mode 100644 arch/i386/kernel/mpparse_32.c delete mode 100644 arch/i386/kernel/msr.c delete mode 100644 arch/i386/kernel/nmi_32.c delete mode 100644 arch/i386/kernel/numaq_32.c delete mode 100644 arch/i386/kernel/paravirt_32.c delete mode 100644 arch/i386/kernel/pci-dma_32.c delete mode 100644 arch/i386/kernel/pcspeaker.c delete mode 100644 arch/i386/kernel/process_32.c delete mode 100644 arch/i386/kernel/ptrace_32.c delete mode 100644 arch/i386/kernel/quirks.c delete mode 100644 arch/i386/kernel/reboot_32.c delete mode 100644 arch/i386/kernel/reboot_fixups_32.c delete mode 100644 arch/i386/kernel/relocate_kernel_32.S delete mode 100644 arch/i386/kernel/scx200_32.c delete mode 100644 arch/i386/kernel/setup_32.c delete mode 100644 arch/i386/kernel/sigframe_32.h delete mode 100644 arch/i386/kernel/signal_32.c delete mode 100644 arch/i386/kernel/smp_32.c delete mode 100644 arch/i386/kernel/smpboot_32.c delete mode 100644 arch/i386/kernel/smpcommon_32.c delete mode 100644 arch/i386/kernel/srat_32.c delete mode 100644 arch/i386/kernel/summit_32.c delete mode 100644 arch/i386/kernel/sys_i386_32.c delete mode 100644 arch/i386/kernel/syscall_table_32.S delete mode 100644 arch/i386/kernel/sysenter_32.c delete mode 100644 arch/i386/kernel/time_32.c delete mode 100644 arch/i386/kernel/topology.c delete mode 100644 arch/i386/kernel/trampoline_32.S delete mode 100644 arch/i386/kernel/traps_32.c delete mode 100644 arch/i386/kernel/tsc_32.c delete mode 100644 arch/i386/kernel/tsc_sync.c delete mode 100644 arch/i386/kernel/vm86_32.c delete mode 100644 arch/i386/kernel/vmi_32.c delete mode 100644 arch/i386/kernel/vmiclock_32.c delete mode 100644 arch/i386/kernel/vmlinux.lds.S delete mode 100644 arch/i386/kernel/vmlinux_32.lds.S delete mode 100644 arch/i386/kernel/vsyscall-int80_32.S delete mode 100644 arch/i386/kernel/vsyscall-note_32.S delete mode 100644 arch/i386/kernel/vsyscall-sigreturn_32.S delete mode 100644 arch/i386/kernel/vsyscall-sysenter_32.S delete mode 100644 arch/i386/kernel/vsyscall_32.S delete mode 100644 arch/i386/kernel/vsyscall_32.lds.S create mode 100644 arch/x86/kernel/.gitignore create mode 100644 arch/x86/kernel/Makefile create mode 100644 arch/x86/kernel/Makefile_32 create mode 100644 arch/x86/kernel/alternative.c create mode 100644 arch/x86/kernel/apic_32.c create mode 100644 arch/x86/kernel/apm_32.c create mode 100644 arch/x86/kernel/asm-offsets.c create mode 100644 arch/x86/kernel/asm-offsets_32.c create mode 100644 arch/x86/kernel/bootflag.c create mode 100644 arch/x86/kernel/cpuid.c create mode 100644 arch/x86/kernel/crash_32.c create mode 100644 arch/x86/kernel/crash_dump_32.c create mode 100644 arch/x86/kernel/doublefault_32.c create mode 100644 arch/x86/kernel/e820_32.c create mode 100644 arch/x86/kernel/early_printk.c create mode 100644 arch/x86/kernel/efi_32.c create mode 100644 arch/x86/kernel/efi_stub_32.S create mode 100644 arch/x86/kernel/entry_32.S create mode 100644 arch/x86/kernel/geode_32.c create mode 100644 arch/x86/kernel/head_32.S create mode 100644 arch/x86/kernel/hpet_32.c create mode 100644 arch/x86/kernel/i386_ksyms_32.c create mode 100644 arch/x86/kernel/i387_32.c create mode 100644 arch/x86/kernel/i8237.c create mode 100644 arch/x86/kernel/i8253_32.c create mode 100644 arch/x86/kernel/i8259_32.c create mode 100644 arch/x86/kernel/init_task_32.c create mode 100644 arch/x86/kernel/io_apic_32.c create mode 100644 arch/x86/kernel/ioport_32.c create mode 100644 arch/x86/kernel/irq_32.c create mode 100644 arch/x86/kernel/kprobes_32.c create mode 100644 arch/x86/kernel/ldt_32.c create mode 100644 arch/x86/kernel/machine_kexec_32.c create mode 100644 arch/x86/kernel/mca_32.c create mode 100644 arch/x86/kernel/microcode.c create mode 100644 arch/x86/kernel/module_32.c create mode 100644 arch/x86/kernel/mpparse_32.c create mode 100644 arch/x86/kernel/msr.c create mode 100644 arch/x86/kernel/nmi_32.c create mode 100644 arch/x86/kernel/numaq_32.c create mode 100644 arch/x86/kernel/paravirt_32.c create mode 100644 arch/x86/kernel/pci-dma_32.c create mode 100644 arch/x86/kernel/pcspeaker.c create mode 100644 arch/x86/kernel/process_32.c create mode 100644 arch/x86/kernel/ptrace_32.c create mode 100644 arch/x86/kernel/quirks.c create mode 100644 arch/x86/kernel/reboot_32.c create mode 100644 arch/x86/kernel/reboot_fixups_32.c create mode 100644 arch/x86/kernel/relocate_kernel_32.S create mode 100644 arch/x86/kernel/scx200_32.c create mode 100644 arch/x86/kernel/setup_32.c create mode 100644 arch/x86/kernel/sigframe_32.h create mode 100644 arch/x86/kernel/signal_32.c create mode 100644 arch/x86/kernel/smp_32.c create mode 100644 arch/x86/kernel/smpboot_32.c create mode 100644 arch/x86/kernel/smpcommon_32.c create mode 100644 arch/x86/kernel/srat_32.c create mode 100644 arch/x86/kernel/summit_32.c create mode 100644 arch/x86/kernel/sys_i386_32.c create mode 100644 arch/x86/kernel/syscall_table_32.S create mode 100644 arch/x86/kernel/sysenter_32.c create mode 100644 arch/x86/kernel/time_32.c create mode 100644 arch/x86/kernel/topology.c create mode 100644 arch/x86/kernel/trampoline_32.S create mode 100644 arch/x86/kernel/traps_32.c create mode 100644 arch/x86/kernel/tsc_32.c create mode 100644 arch/x86/kernel/tsc_sync.c create mode 100644 arch/x86/kernel/vm86_32.c create mode 100644 arch/x86/kernel/vmi_32.c create mode 100644 arch/x86/kernel/vmiclock_32.c create mode 100644 arch/x86/kernel/vmlinux.lds.S create mode 100644 arch/x86/kernel/vmlinux_32.lds.S create mode 100644 arch/x86/kernel/vsyscall-int80_32.S create mode 100644 arch/x86/kernel/vsyscall-note_32.S create mode 100644 arch/x86/kernel/vsyscall-sigreturn_32.S create mode 100644 arch/x86/kernel/vsyscall-sysenter_32.S create mode 100644 arch/x86/kernel/vsyscall_32.S create mode 100644 arch/x86/kernel/vsyscall_32.lds.S (limited to 'arch') diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 397cfed..9c1da72 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -17,6 +17,13 @@ # 20050320 Kianusch Sayah Karadji # Added support for GEODE CPU +# Fill in SRCARCH +SRCARCH := x86 + +archprepare: + @mkdir -p ${objtree}/arch/x86/kernel + + HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(HAS_BIARCH),y) AS := $(AS) --32 @@ -99,10 +106,10 @@ core-$(CONFIG_XEN) += arch/x86/xen/ # default subarch .h files mflags-y += -Iinclude/asm-i386/mach-default -head-y := arch/i386/kernel/head_32.o arch/i386/kernel/init_task_32.o +head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task_32.o libs-y += arch/x86/lib/ -core-y += arch/i386/kernel/ \ +core-y += arch/x86/kernel/ \ arch/x86/mm/ \ $(mcore-y)/ \ arch/x86/crypto/ diff --git a/arch/i386/kernel/.gitignore b/arch/i386/kernel/.gitignore deleted file mode 100644 index 40836ad..0000000 --- a/arch/i386/kernel/.gitignore +++ /dev/null @@ -1 +0,0 @@ -vsyscall.lds diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile deleted file mode 100644 index d3ebd16..0000000 --- a/arch/i386/kernel/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -ifeq ($(CONFIG_X86_32),y) -include ${srctree}/arch/i386/kernel/Makefile_32 -else -include ${srctree}/arch/x86_64/kernel/Makefile_64 -endif diff --git a/arch/i386/kernel/Makefile_32 b/arch/i386/kernel/Makefile_32 deleted file mode 100644 index 5096f48..0000000 --- a/arch/i386/kernel/Makefile_32 +++ /dev/null @@ -1,88 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := head_32.o init_task_32.o vmlinux.lds - -obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \ - ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \ - pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\ - quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o - -obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-y += ../../x86/kernel/cpu/ -obj-y += ../../x86/kernel/acpi/ -obj-$(CONFIG_X86_BIOS_REBOOT) += reboot_32.o -obj-$(CONFIG_MCA) += mca_32.o -obj-$(CONFIG_X86_MSR) += msr.o -obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_MICROCODE) += microcode.o -obj-$(CONFIG_APM) += apm_32.o -obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o -obj-$(CONFIG_SMP) += smpcommon_32.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_32.o -obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o -obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o -obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o -obj-$(CONFIG_KEXEC) += machine_kexec_32.o relocate_kernel_32.o crash_32.o -obj-$(CONFIG_CRASH_DUMP) += crash_dump_32.o -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o -obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o -obj-$(CONFIG_KPROBES) += kprobes_32.o -obj-$(CONFIG_MODULES) += module_32.o -obj-y += sysenter_32.o vsyscall_32.o -obj-$(CONFIG_ACPI_SRAT) += srat_32.o -obj-$(CONFIG_EFI) += efi_32.o efi_stub_32.o -obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o -obj-$(CONFIG_VM86) += vm86_32.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_HPET_TIMER) += hpet_32.o -obj-$(CONFIG_K8_NB) += k8.o -obj-$(CONFIG_MGEODE_LX) += geode_32.o - -obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o -obj-$(CONFIG_PARAVIRT) += paravirt_32.o -obj-y += pcspeaker.o - -obj-$(CONFIG_SCx200) += scx200_32.o - -# vsyscall_32.o contains the vsyscall DSO images as __initdata. -# We must build both images before we can assemble it. -# Note: kbuild does not track this dependency due to usage of .incbin -$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so -targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so) -targets += vsyscall-note_32.o vsyscall_32.lds - -# The DSO images are built using a special linker script. -quiet_cmd_syscall = SYSCALL $@ - cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \ - -Wl,-T,$(filter-out FORCE,$^) -o $@ - -export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH) - -vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \ - $(call ld-option, -Wl$(comma)--hash-style=sysv) -SYSCFLAGS_vsyscall-sysenter_32.so = $(vsyscall-flags) -SYSCFLAGS_vsyscall-int80_32.so = $(vsyscall-flags) - -$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \ -$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \ - $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE - $(call if_changed,syscall) - -# We also create a special relocatable object that should mirror the symbol -# table and layout of the linked DSO. With ld -R we can then refer to -# these symbols in the kernel code rather than hand-coded addresses. -extra-y += vsyscall-syms.o -$(obj)/built-in.o: $(obj)/vsyscall-syms.o -$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o - -SYSCFLAGS_vsyscall-syms.o = -r -$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \ - $(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE - $(call if_changed,syscall) - -k8-y += ../../x86_64/kernel/k8.o -stacktrace-y += ../../x86_64/kernel/stacktrace.o - diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c deleted file mode 100644 index bd72d94..0000000 --- a/arch/i386/kernel/alternative.c +++ /dev/null @@ -1,450 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_PATCH_LEN (255-1) - -#ifdef CONFIG_HOTPLUG_CPU -static int smp_alt_once; - -static int __init bootonly(char *str) -{ - smp_alt_once = 1; - return 1; -} -__setup("smp-alt-boot", bootonly); -#else -#define smp_alt_once 1 -#endif - -static int debug_alternative; - -static int __init debug_alt(char *str) -{ - debug_alternative = 1; - return 1; -} -__setup("debug-alternative", debug_alt); - -static int noreplace_smp; - -static int __init setup_noreplace_smp(char *str) -{ - noreplace_smp = 1; - return 1; -} -__setup("noreplace-smp", setup_noreplace_smp); - -#ifdef CONFIG_PARAVIRT -static int noreplace_paravirt = 0; - -static int __init setup_noreplace_paravirt(char *str) -{ - noreplace_paravirt = 1; - return 1; -} -__setup("noreplace-paravirt", setup_noreplace_paravirt); -#endif - -#define DPRINTK(fmt, args...) if (debug_alternative) \ - printk(KERN_DEBUG fmt, args) - -#ifdef GENERIC_NOP1 -/* Use inline assembly to define this because the nops are defined - as inline assembly strings in the include files and we cannot - get them easily into strings. */ -asm("\t.data\nintelnops: " - GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 - GENERIC_NOP7 GENERIC_NOP8); -extern unsigned char intelnops[]; -static unsigned char *intel_nops[ASM_NOP_MAX+1] = { - NULL, - intelnops, - intelnops + 1, - intelnops + 1 + 2, - intelnops + 1 + 2 + 3, - intelnops + 1 + 2 + 3 + 4, - intelnops + 1 + 2 + 3 + 4 + 5, - intelnops + 1 + 2 + 3 + 4 + 5 + 6, - intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -#endif - -#ifdef K8_NOP1 -asm("\t.data\nk8nops: " - K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8); -extern unsigned char k8nops[]; -static unsigned char *k8_nops[ASM_NOP_MAX+1] = { - NULL, - k8nops, - k8nops + 1, - k8nops + 1 + 2, - k8nops + 1 + 2 + 3, - k8nops + 1 + 2 + 3 + 4, - k8nops + 1 + 2 + 3 + 4 + 5, - k8nops + 1 + 2 + 3 + 4 + 5 + 6, - k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -#endif - -#ifdef K7_NOP1 -asm("\t.data\nk7nops: " - K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8); -extern unsigned char k7nops[]; -static unsigned char *k7_nops[ASM_NOP_MAX+1] = { - NULL, - k7nops, - k7nops + 1, - k7nops + 1 + 2, - k7nops + 1 + 2 + 3, - k7nops + 1 + 2 + 3 + 4, - k7nops + 1 + 2 + 3 + 4 + 5, - k7nops + 1 + 2 + 3 + 4 + 5 + 6, - k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -#endif - -#ifdef CONFIG_X86_64 - -extern char __vsyscall_0; -static inline unsigned char** find_nop_table(void) -{ - return k8_nops; -} - -#else /* CONFIG_X86_64 */ - -static struct nop { - int cpuid; - unsigned char **noptable; -} noptypes[] = { - { X86_FEATURE_K8, k8_nops }, - { X86_FEATURE_K7, k7_nops }, - { -1, NULL } -}; - -static unsigned char** find_nop_table(void) -{ - unsigned char **noptable = intel_nops; - int i; - - for (i = 0; noptypes[i].cpuid >= 0; i++) { - if (boot_cpu_has(noptypes[i].cpuid)) { - noptable = noptypes[i].noptable; - break; - } - } - return noptable; -} - -#endif /* CONFIG_X86_64 */ - -/* Use this to add nops to a buffer, then text_poke the whole buffer. */ -static void add_nops(void *insns, unsigned int len) -{ - unsigned char **noptable = find_nop_table(); - - while (len > 0) { - unsigned int noplen = len; - if (noplen > ASM_NOP_MAX) - noplen = ASM_NOP_MAX; - memcpy(insns, noptable[noplen], noplen); - insns += noplen; - len -= noplen; - } -} - -extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; -extern u8 *__smp_locks[], *__smp_locks_end[]; - -/* Replace instructions with better alternatives for this CPU type. - This runs before SMP is initialized to avoid SMP problems with - self modifying code. This implies that assymetric systems where - APs have less capabilities than the boot processor are not handled. - Tough. Make sure you disable such features by hand. */ - -void apply_alternatives(struct alt_instr *start, struct alt_instr *end) -{ - struct alt_instr *a; - char insnbuf[MAX_PATCH_LEN]; - - DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end); - for (a = start; a < end; a++) { - u8 *instr = a->instr; - BUG_ON(a->replacementlen > a->instrlen); - BUG_ON(a->instrlen > sizeof(insnbuf)); - if (!boot_cpu_has(a->cpuid)) - continue; -#ifdef CONFIG_X86_64 - /* vsyscall code is not mapped yet. resolve it manually. */ - if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END) { - instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0)); - DPRINTK("%s: vsyscall fixup: %p => %p\n", - __FUNCTION__, a->instr, instr); - } -#endif - memcpy(insnbuf, a->replacement, a->replacementlen); - add_nops(insnbuf + a->replacementlen, - a->instrlen - a->replacementlen); - text_poke(instr, insnbuf, a->instrlen); - } -} - -#ifdef CONFIG_SMP - -static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end) -{ - u8 **ptr; - - for (ptr = start; ptr < end; ptr++) { - if (*ptr < text) - continue; - if (*ptr > text_end) - continue; - text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */ - }; -} - -static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end) -{ - u8 **ptr; - char insn[1]; - - if (noreplace_smp) - return; - - add_nops(insn, 1); - for (ptr = start; ptr < end; ptr++) { - if (*ptr < text) - continue; - if (*ptr > text_end) - continue; - text_poke(*ptr, insn, 1); - }; -} - -struct smp_alt_module { - /* what is this ??? */ - struct module *mod; - char *name; - - /* ptrs to lock prefixes */ - u8 **locks; - u8 **locks_end; - - /* .text segment, needed to avoid patching init code ;) */ - u8 *text; - u8 *text_end; - - struct list_head next; -}; -static LIST_HEAD(smp_alt_modules); -static DEFINE_SPINLOCK(smp_alt); - -void alternatives_smp_module_add(struct module *mod, char *name, - void *locks, void *locks_end, - void *text, void *text_end) -{ - struct smp_alt_module *smp; - unsigned long flags; - - if (noreplace_smp) - return; - - if (smp_alt_once) { - if (boot_cpu_has(X86_FEATURE_UP)) - alternatives_smp_unlock(locks, locks_end, - text, text_end); - return; - } - - smp = kzalloc(sizeof(*smp), GFP_KERNEL); - if (NULL == smp) - return; /* we'll run the (safe but slow) SMP code then ... */ - - smp->mod = mod; - smp->name = name; - smp->locks = locks; - smp->locks_end = locks_end; - smp->text = text; - smp->text_end = text_end; - DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n", - __FUNCTION__, smp->locks, smp->locks_end, - smp->text, smp->text_end, smp->name); - - spin_lock_irqsave(&smp_alt, flags); - list_add_tail(&smp->next, &smp_alt_modules); - if (boot_cpu_has(X86_FEATURE_UP)) - alternatives_smp_unlock(smp->locks, smp->locks_end, - smp->text, smp->text_end); - spin_unlock_irqrestore(&smp_alt, flags); -} - -void alternatives_smp_module_del(struct module *mod) -{ - struct smp_alt_module *item; - unsigned long flags; - - if (smp_alt_once || noreplace_smp) - return; - - spin_lock_irqsave(&smp_alt, flags); - list_for_each_entry(item, &smp_alt_modules, next) { - if (mod != item->mod) - continue; - list_del(&item->next); - spin_unlock_irqrestore(&smp_alt, flags); - DPRINTK("%s: %s\n", __FUNCTION__, item->name); - kfree(item); - return; - } - spin_unlock_irqrestore(&smp_alt, flags); -} - -void alternatives_smp_switch(int smp) -{ - struct smp_alt_module *mod; - unsigned long flags; - -#ifdef CONFIG_LOCKDEP - /* - * A not yet fixed binutils section handling bug prevents - * alternatives-replacement from working reliably, so turn - * it off: - */ - printk("lockdep: not fixing up alternatives.\n"); - return; -#endif - - if (noreplace_smp || smp_alt_once) - return; - BUG_ON(!smp && (num_online_cpus() > 1)); - - spin_lock_irqsave(&smp_alt, flags); - if (smp) { - printk(KERN_INFO "SMP alternatives: switching to SMP code\n"); - clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); - clear_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); - list_for_each_entry(mod, &smp_alt_modules, next) - alternatives_smp_lock(mod->locks, mod->locks_end, - mod->text, mod->text_end); - } else { - printk(KERN_INFO "SMP alternatives: switching to UP code\n"); - set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); - set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); - list_for_each_entry(mod, &smp_alt_modules, next) - alternatives_smp_unlock(mod->locks, mod->locks_end, - mod->text, mod->text_end); - } - spin_unlock_irqrestore(&smp_alt, flags); -} - -#endif - -#ifdef CONFIG_PARAVIRT -void apply_paravirt(struct paravirt_patch_site *start, - struct paravirt_patch_site *end) -{ - struct paravirt_patch_site *p; - char insnbuf[MAX_PATCH_LEN]; - - if (noreplace_paravirt) - return; - - for (p = start; p < end; p++) { - unsigned int used; - - BUG_ON(p->len > MAX_PATCH_LEN); - /* prep the buffer with the original instructions */ - memcpy(insnbuf, p->instr, p->len); - used = paravirt_ops.patch(p->instrtype, p->clobbers, insnbuf, - (unsigned long)p->instr, p->len); - - BUG_ON(used > p->len); - - /* Pad the rest with nops */ - add_nops(insnbuf + used, p->len - used); - text_poke(p->instr, insnbuf, p->len); - } -} -extern struct paravirt_patch_site __start_parainstructions[], - __stop_parainstructions[]; -#endif /* CONFIG_PARAVIRT */ - -void __init alternative_instructions(void) -{ - unsigned long flags; - - /* The patching is not fully atomic, so try to avoid local interruptions - that might execute the to be patched code. - Other CPUs are not running. */ - stop_nmi(); -#ifdef CONFIG_X86_MCE - stop_mce(); -#endif - - local_irq_save(flags); - apply_alternatives(__alt_instructions, __alt_instructions_end); - - /* switch to patch-once-at-boottime-only mode and free the - * tables in case we know the number of CPUs will never ever - * change */ -#ifdef CONFIG_HOTPLUG_CPU - if (num_possible_cpus() < 2) - smp_alt_once = 1; -#endif - -#ifdef CONFIG_SMP - if (smp_alt_once) { - if (1 == num_possible_cpus()) { - printk(KERN_INFO "SMP alternatives: switching to UP code\n"); - set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); - set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); - alternatives_smp_unlock(__smp_locks, __smp_locks_end, - _text, _etext); - } - free_init_pages("SMP alternatives", - (unsigned long)__smp_locks, - (unsigned long)__smp_locks_end); - } else { - alternatives_smp_module_add(NULL, "core kernel", - __smp_locks, __smp_locks_end, - _text, _etext); - alternatives_smp_switch(0); - } -#endif - apply_paravirt(__parainstructions, __parainstructions_end); - local_irq_restore(flags); - - restart_nmi(); -#ifdef CONFIG_X86_MCE - restart_mce(); -#endif -} - -/* - * Warning: - * When you use this code to patch more than one byte of an instruction - * you need to make sure that other CPUs cannot execute this code in parallel. - * Also no thread must be currently preempted in the middle of these instructions. - * And on the local CPU you need to be protected again NMI or MCE handlers - * seeing an inconsistent instruction while you patch. - */ -void __kprobes text_poke(void *addr, unsigned char *opcode, int len) -{ - memcpy(addr, opcode, len); - sync_core(); - /* Could also do a CLFLUSH here to speed up CPU recovery; but - that causes hangs on some VIA CPUs. */ -} diff --git a/arch/i386/kernel/apic_32.c b/arch/i386/kernel/apic_32.c deleted file mode 100644 index 3d67ae1..0000000 --- a/arch/i386/kernel/apic_32.c +++ /dev/null @@ -1,1566 +0,0 @@ -/* - * Local APIC handling, local APIC timers - * - * (c) 1999, 2000 Ingo Molnar - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively. - * Maciej W. Rozycki : Various updates and fixes. - * Mikael Pettersson : Power Management for UP-APIC. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "io_ports.h" - -/* - * Sanity check - */ -#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F -# error SPURIOUS_APIC_VECTOR definition error -#endif - -/* - * Knob to control our willingness to enable the local APIC. - * - * -1=force-disable, +1=force-enable - */ -static int enable_local_apic __initdata = 0; - -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; -/* Local APIC timer works in C2 */ -int local_apic_timer_c2_ok; -EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); - -/* - * Debug level, exported for io_apic.c - */ -int apic_verbosity; - -static unsigned int calibration_result; - -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt); -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt); -static void lapic_timer_broadcast(cpumask_t mask); -static void apic_pm_activate(void); - -/* - * The local apic timer can be used for any function which is CPU local. - */ -static struct clock_event_device lapic_clockevent = { - .name = "lapic", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, - .shift = 32, - .set_mode = lapic_timer_setup, - .set_next_event = lapic_next_event, - .broadcast = lapic_timer_broadcast, - .rating = 100, - .irq = -1, -}; -static DEFINE_PER_CPU(struct clock_event_device, lapic_events); - -/* Local APIC was disabled by the BIOS and enabled by the kernel */ -static int enabled_via_apicbase; - -/* - * Get the LAPIC version - */ -static inline int lapic_get_version(void) -{ - return GET_APIC_VERSION(apic_read(APIC_LVR)); -} - -/* - * Check, if the APIC is integrated or a seperate chip - */ -static inline int lapic_is_integrated(void) -{ - return APIC_INTEGRATED(lapic_get_version()); -} - -/* - * Check, whether this is a modern or a first generation APIC - */ -static int modern_apic(void) -{ - /* AMD systems use old APIC versions, so check the CPU */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 0xf) - return 1; - return lapic_get_version() >= 0x14; -} - -void apic_wait_icr_idle(void) -{ - while (apic_read(APIC_ICR) & APIC_ICR_BUSY) - cpu_relax(); -} - -unsigned long safe_apic_wait_icr_idle(void) -{ - unsigned long send_status; - int timeout; - - timeout = 0; - do { - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - if (!send_status) - break; - udelay(100); - } while (timeout++ < 1000); - - return send_status; -} - -/** - * enable_NMI_through_LVT0 - enable NMI through local vector table 0 - */ -void enable_NMI_through_LVT0 (void * dummy) -{ - unsigned int v = APIC_DM_NMI; - - /* Level triggered for 82489DX */ - if (!lapic_is_integrated()) - v |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT0, v); -} - -/** - * get_physical_broadcast - Get number of physical broadcast IDs - */ -int get_physical_broadcast(void) -{ - return modern_apic() ? 0xff : 0xf; -} - -/** - * lapic_get_maxlvt - get the maximum number of local vector table entries - */ -int lapic_get_maxlvt(void) -{ - unsigned int v = apic_read(APIC_LVR); - - /* 82489DXs do not report # of LVT entries. */ - return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; -} - -/* - * Local APIC timer - */ - -/* Clock divisor is set to 16 */ -#define APIC_DIVISOR 16 - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ -static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) -{ - unsigned int lvtt_value, tmp_value; - - lvtt_value = LOCAL_TIMER_VECTOR; - if (!oneshot) - lvtt_value |= APIC_LVT_TIMER_PERIODIC; - if (!lapic_is_integrated()) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); - - if (!irqen) - lvtt_value |= APIC_LVT_MASKED; - - apic_write_around(APIC_LVTT, lvtt_value); - - /* - * Divide PICLK by 16 - */ - tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - if (!oneshot) - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); -} - -/* - * Program the next event, relative to now - */ -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - apic_write_around(APIC_TMICT, delta); - return 0; -} - -/* - * Setup the lapic timer in periodic or oneshot mode - */ -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - unsigned int v; - - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) - return; - - local_irq_save(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - case CLOCK_EVT_MODE_ONESHOT: - __setup_APIC_LVTT(calibration_result, - mode != CLOCK_EVT_MODE_PERIODIC, 1); - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - v = apic_read(APIC_LVTT); - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); - break; - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do here */ - break; - } - - local_irq_restore(flags); -} - -/* - * Local APIC timer broadcast function - */ -static void lapic_timer_broadcast(cpumask_t mask) -{ -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#endif -} - -/* - * Setup the local APIC timer for this CPU. Copy the initilized values - * of the boot CPU and register the clock event in the framework. - */ -static void __devinit setup_APIC_timer(void) -{ - struct clock_event_device *levt = &__get_cpu_var(lapic_events); - - memcpy(levt, &lapic_clockevent, sizeof(*levt)); - levt->cpumask = cpumask_of_cpu(smp_processor_id()); - - clockevents_register_device(levt); -} - -/* - * In this functions we calibrate APIC bus clocks to the external timer. - * - * We want to do the calibration only once since we want to have local timer - * irqs syncron. CPUs connected by the same APIC bus have the very same bus - * frequency. - * - * This was previously done by reading the PIT/HPET and waiting for a wrap - * around to find out, that a tick has elapsed. I have a box, where the PIT - * readout is broken, so it never gets out of the wait loop again. This was - * also reported by others. - * - * Monitoring the jiffies value is inaccurate and the clockevents - * infrastructure allows us to do a simple substitution of the interrupt - * handler. - * - * The calibration routine also uses the pm_timer when possible, as the PIT - * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes - * back to normal later in the boot process). - */ - -#define LAPIC_CAL_LOOPS (HZ/10) - -static __initdata int lapic_cal_loops = -1; -static __initdata long lapic_cal_t1, lapic_cal_t2; -static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2; -static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2; -static __initdata unsigned long lapic_cal_j1, lapic_cal_j2; - -/* - * Temporary interrupt handler. - */ -static void __init lapic_cal_handler(struct clock_event_device *dev) -{ - unsigned long long tsc = 0; - long tapic = apic_read(APIC_TMCCT); - unsigned long pm = acpi_pm_read_early(); - - if (cpu_has_tsc) - rdtscll(tsc); - - switch (lapic_cal_loops++) { - case 0: - lapic_cal_t1 = tapic; - lapic_cal_tsc1 = tsc; - lapic_cal_pm1 = pm; - lapic_cal_j1 = jiffies; - break; - - case LAPIC_CAL_LOOPS: - lapic_cal_t2 = tapic; - lapic_cal_tsc2 = tsc; - if (pm < lapic_cal_pm1) - pm += ACPI_PM_OVRRUN; - lapic_cal_pm2 = pm; - lapic_cal_j2 = jiffies; - break; - } -} - -/* - * Setup the boot APIC - * - * Calibrate and verify the result. - */ -void __init setup_boot_APIC_clock(void) -{ - struct clock_event_device *levt = &__get_cpu_var(lapic_events); - const long pm_100ms = PMTMR_TICKS_PER_SEC/10; - const long pm_thresh = pm_100ms/100; - void (*real_handler)(struct clock_event_device *dev); - unsigned long deltaj; - long delta, deltapm; - int pm_referenced = 0; - - /* - * The local apic timer can be disabled via the kernel - * commandline or from the CPU detection code. Register the lapic - * timer as a dummy clock event source on SMP systems, so the - * broadcast mechanism is used. On UP systems simply ignore it. - */ - if (local_apic_timer_disabled) { - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) - setup_APIC_timer(); - return; - } - - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" - "calibrating APIC timer ...\n"); - - local_irq_disable(); - - /* Replace the global interrupt handler */ - real_handler = global_clock_event->event_handler; - global_clock_event->event_handler = lapic_cal_handler; - - /* - * Setup the APIC counter to 1e9. There is no way the lapic - * can underflow in the 100ms detection time frame - */ - __setup_APIC_LVTT(1000000000, 0, 0); - - /* Let the interrupts run */ - local_irq_enable(); - - while (lapic_cal_loops <= LAPIC_CAL_LOOPS) - cpu_relax(); - - local_irq_disable(); - - /* Restore the real event handler */ - global_clock_event->event_handler = real_handler; - - /* Build delta t1-t2 as apic timer counts down */ - delta = lapic_cal_t1 - lapic_cal_t2; - apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta); - - /* Check, if the PM timer is available */ - deltapm = lapic_cal_pm2 - lapic_cal_pm1; - apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); - - if (deltapm) { - unsigned long mult; - u64 res; - - mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22); - - if (deltapm > (pm_100ms - pm_thresh) && - deltapm < (pm_100ms + pm_thresh)) { - apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); - } else { - res = (((u64) deltapm) * mult) >> 22; - do_div(res, 1000000); - printk(KERN_WARNING "APIC calibration not consistent " - "with PM Timer: %ldms instead of 100ms\n", - (long)res); - /* Correct the lapic counter value */ - res = (((u64) delta ) * pm_100ms); - do_div(res, deltapm); - printk(KERN_INFO "APIC delta adjusted to PM-Timer: " - "%lu (%ld)\n", (unsigned long) res, delta); - delta = (long) res; - } - pm_referenced = 1; - } - - /* Calculate the scaled math multiplication factor */ - lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32); - lapic_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); - lapic_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &lapic_clockevent); - - calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; - - apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); - apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); - apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", - calibration_result); - - if (cpu_has_tsc) { - delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1); - apic_printk(APIC_VERBOSE, "..... CPU clock speed is " - "%ld.%04ld MHz.\n", - (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ), - (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ)); - } - - apic_printk(APIC_VERBOSE, "..... host bus clock speed is " - "%u.%04u MHz.\n", - calibration_result / (1000000 / HZ), - calibration_result % (1000000 / HZ)); - - local_apic_timer_verify_ok = 1; - - /* We trust the pm timer based calibration */ - if (!pm_referenced) { - apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); - - /* - * Setup the apic timer manually - */ - levt->event_handler = lapic_cal_handler; - lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt); - lapic_cal_loops = -1; - - /* Let the interrupts run */ - local_irq_enable(); - - while (lapic_cal_loops <= LAPIC_CAL_LOOPS) - cpu_relax(); - - local_irq_disable(); - - /* Stop the lapic timer */ - lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); - - local_irq_enable(); - - /* Jiffies delta */ - deltaj = lapic_cal_j2 - lapic_cal_j1; - apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); - - /* Check, if the jiffies result is consistent */ - if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) - apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); - else - local_apic_timer_verify_ok = 0; - } else - local_irq_enable(); - - if (!local_apic_timer_verify_ok) { - printk(KERN_WARNING - "APIC timer disabled due to verification failure.\n"); - /* No broadcast on UP ! */ - if (num_possible_cpus() == 1) - return; - } else { - /* - * If nmi_watchdog is set to IO_APIC, we need the - * PIT/HPET going. Otherwise register lapic as a dummy - * device. - */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=1!\n"); - } - - /* Setup the lapic or request the broadcast */ - setup_APIC_timer(); -} - -void __devinit setup_secondary_APIC_clock(void) -{ - setup_APIC_timer(); -} - -/* - * The guts of the apic timer interrupt - */ -static void local_apic_timer_interrupt(void) -{ - int cpu = smp_processor_id(); - struct clock_event_device *evt = &per_cpu(lapic_events, cpu); - - /* - * Normally we should not be here till LAPIC has been initialized but - * in some cases like kdump, its possible that there is a pending LAPIC - * timer interrupt from previous kernel's context and is delivered in - * new kernel the moment interrupts are enabled. - * - * Interrupts are enabled early and LAPIC is setup much later, hence - * its possible that when we get here evt->event_handler is NULL. - * Check for event_handler being NULL and discard the interrupt as - * spurious. - */ - if (!evt->event_handler) { - printk(KERN_WARNING - "Spurious LAPIC timer interrupt on cpu %d\n", cpu); - /* Switch it off */ - lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); - return; - } - - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - evt->event_handler(evt); -} - -/* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] - */ - -void fastcall smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - irq_enter(); - local_apic_timer_interrupt(); - irq_exit(); - - set_irq_regs(old_regs); -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - -/* - * Local APIC start and shutdown - */ - -/** - * clear_local_APIC - shutdown the local APIC - * - * This is called, when a CPU is disabled and before rebooting, so the state of - * the local APIC has no dangling leftovers. Also used to cleanout any BIOS - * leftovers during boot. - */ -void clear_local_APIC(void) -{ - int maxlvt = lapic_get_maxlvt(); - unsigned long v; - - /* - * Masking an LVT entry can trigger a local APIC error - * if the vector is zero. Mask LVTERR first to prevent this. - */ - if (maxlvt >= 3) { - v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); - } - /* - * Careful: we have to set masks only first to deassert - * any level-triggered sources. - */ - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT1); - apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); - if (maxlvt >= 4) { - v = apic_read(APIC_LVTPC); - apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); - } - - /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) { - v = apic_read(APIC_LVTTHMR); - apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); - } -#endif - /* - * Clean APIC state for other OSs: - */ - apic_write_around(APIC_LVTT, APIC_LVT_MASKED); - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - apic_write_around(APIC_LVT1, APIC_LVT_MASKED); - if (maxlvt >= 3) - apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); - if (maxlvt >= 4) - apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); - -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif - /* Integrated APIC (!82489DX) ? */ - if (lapic_is_integrated()) { - if (maxlvt > 3) - /* Clear ESR due to Pentium errata 3AP and 11AP */ - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - } -} - -/** - * disable_local_APIC - clear and disable the local APIC - */ -void disable_local_APIC(void) -{ - unsigned long value; - - clear_local_APIC(); - - /* - * Disable APIC (implies clearing of registers - * for 82489DX!). - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_SPIV_APIC_ENABLED; - apic_write_around(APIC_SPIV, value); - - /* - * When LAPIC was disabled by the BIOS and enabled by the kernel, - * restore the disabled state. - */ - if (enabled_via_apicbase) { - unsigned int l, h; - - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_ENABLE; - wrmsr(MSR_IA32_APICBASE, l, h); - } -} - -/* - * If Linux enabled the LAPIC against the BIOS default disable it down before - * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and - * not power-off. Additionally clear all LVT entries before disable_local_APIC - * for the case where Linux didn't enable the LAPIC. - */ -void lapic_shutdown(void) -{ - unsigned long flags; - - if (!cpu_has_apic) - return; - - local_irq_save(flags); - clear_local_APIC(); - - if (enabled_via_apicbase) - disable_local_APIC(); - - local_irq_restore(flags); -} - -/* - * This is to verify that we're looking at a real local APIC. - * Check these against your board if the CPUs aren't getting - * started for no apparent reason. - */ -int __init verify_local_APIC(void) -{ - unsigned int reg0, reg1; - - /* - * The version register is read-only in a real APIC. - */ - reg0 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); - apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); - reg1 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); - - /* - * The two version reads above should print the same - * numbers. If the second one is different, then we - * poke at a non-APIC. - */ - if (reg1 != reg0) - return 0; - - /* - * Check if the version looks reasonably. - */ - reg1 = GET_APIC_VERSION(reg0); - if (reg1 == 0x00 || reg1 == 0xff) - return 0; - reg1 = lapic_get_maxlvt(); - if (reg1 < 0x02 || reg1 == 0xff) - return 0; - - /* - * The ID register is read/write in a real APIC. - */ - reg0 = apic_read(APIC_ID); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); - - /* - * The next two are just to see if we have sane values. - * They're only really relevant if we're in Virtual Wire - * compatibility mode, but most boxes are anymore. - */ - reg0 = apic_read(APIC_LVT0); - apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); - reg1 = apic_read(APIC_LVT1); - apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); - - return 1; -} - -/** - * sync_Arb_IDs - synchronize APIC bus arbitration IDs - */ -void __init sync_Arb_IDs(void) -{ - /* - * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not - * needed on AMD. - */ - if (modern_apic()) - return; - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - - apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); -} - -/* - * An initial setup of the virtual wire mode. - */ -void __init init_bsp_APIC(void) -{ - unsigned long value; - - /* - * Don't do the setup now if we have a SMP BIOS as the - * through-I/O-APIC virtual wire mode might be active. - */ - if (smp_found_config || !cpu_has_apic) - return; - - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - - /* - * Enable APIC. - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - - /* This bit is reserved on P4/Xeon and should be cleared */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - (boot_cpu_data.x86 == 15)) - value &= ~APIC_SPIV_FOCUS_DISABLED; - else - value |= APIC_SPIV_FOCUS_DISABLED; - value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); - - /* - * Set up the virtual wire mode. - */ - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); - value = APIC_DM_NMI; - if (!lapic_is_integrated()) /* 82489DX */ - value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); -} - -/** - * setup_local_APIC - setup the local APIC - */ -void __devinit setup_local_APIC(void) -{ - unsigned long oldvalue, value, maxlvt, integrated; - int i, j; - - /* Pound the ESR really hard over the head with a big hammer - mbligh */ - if (esr_disable) { - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - } - - integrated = lapic_is_integrated(); - - /* - * Double-check whether this APIC is really registered. - */ - if (!apic_id_registered()) - BUG(); - - /* - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ - init_apic_ldr(); - - /* - * Set Task Priority to 'accept all'. We never change this - * later on. - */ - value = apic_read(APIC_TASKPRI); - value &= ~APIC_TPRI_MASK; - apic_write_around(APIC_TASKPRI, value); - - /* - * After a crash, we no longer service the interrupts and a pending - * interrupt from previous kernel might still have ISR bit set. - * - * Most probably by now CPU has serviced that pending interrupt and - * it might not have done the ack_APIC_irq() because it thought, - * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it - * does not clear the ISR bit and cpu thinks it has already serivced - * the interrupt. Hence a vector might get locked. It was noticed - * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. - */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1< 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - oldvalue = apic_read(APIC_ESR); - - /* enables sending errors */ - value = ERROR_APIC_VECTOR; - apic_write_around(APIC_LVTERR, value); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); - value = apic_read(APIC_ESR); - if (value != oldvalue) - apic_printk(APIC_VERBOSE, "ESR value before enabling " - "vector: 0x%08lx after: 0x%08lx\n", - oldvalue, value); - } else { - if (esr_disable) - /* - * Something untraceble is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); - } - - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, value); - - setup_apic_nmi_watchdog(NULL); - apic_pm_activate(); -} - -/* - * Detect and initialize APIC - */ -static int __init detect_init_APIC (void) -{ - u32 h, l, features; - - /* Disabled by kernel option? */ - if (enable_local_apic < 0) - return -1; - - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_AMD: - if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || - (boot_cpu_data.x86 == 15)) - break; - goto no_apic; - case X86_VENDOR_INTEL: - if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 || - (boot_cpu_data.x86 == 5 && cpu_has_apic)) - break; - goto no_apic; - default: - goto no_apic; - } - - if (!cpu_has_apic) { - /* - * Over-ride BIOS and try to enable the local APIC only if - * "lapic" specified. - */ - if (enable_local_apic <= 0) { - printk(KERN_INFO "Local APIC disabled by BIOS -- " - "you can enable it with \"lapic\"\n"); - return -1; - } - /* - * Some BIOSes disable the local APIC in the APIC_BASE - * MSR. This can only be done in software for Intel P6 or later - * and AMD K7 (Model > 1) or later. - */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk(KERN_INFO - "Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; - } - } - /* - * The APIC feature bit should now be enabled - * in `cpuid' - */ - features = cpuid_edx(1); - if (!(features & (1 << X86_FEATURE_APIC))) { - printk(KERN_WARNING "Could not enable APIC!\n"); - return -1; - } - set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - - printk(KERN_INFO "Found and enabled local APIC!\n"); - - apic_pm_activate(); - - return 0; - -no_apic: - printk(KERN_INFO "No local APIC present or hardware disabled\n"); - return -1; -} - -/** - * init_apic_mappings - initialize APIC mappings - */ -void __init init_apic_mappings(void) -{ - unsigned long apic_phys; - - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ - if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else - apic_phys = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, - apic_phys); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); - -#ifdef CONFIG_X86_IO_APIC - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - if (!ioapic_phys) { - printk(KERN_ERR - "WARNING: bogus zero IO-APIC " - "address found in MPTABLE, " - "disabling IO/APIC support!\n"); - smp_found_config = 0; - skip_ioapic_setup = 1; - goto fake_ioapic_page; - } - } else { -fake_ioapic_page: - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - } - } -#endif -} - -/* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. - */ -int __init APIC_init_uniprocessor (void) -{ - if (enable_local_apic < 0) - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - - if (!smp_found_config && !cpu_has_apic) - return -1; - - /* - * Complain if the BIOS pretends there is one. - */ - if (!cpu_has_apic && - APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return -1; - } - - verify_local_APIC(); - - connect_bsp_APIC(); - - /* - * Hack: In case of kdump, after a crash, kernel might be booting - * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid - * might be zero if read from MP tables. Get it from LAPIC. - */ -#ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); -#endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); - - setup_local_APIC(); - -#ifdef CONFIG_X86_IO_APIC - if (smp_found_config) - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); -#endif - setup_boot_clock(); - - return 0; -} - -/* - * APIC command line parameters - */ -static int __init parse_lapic(char *arg) -{ - enable_local_apic = 1; - return 0; -} -early_param("lapic", parse_lapic); - -static int __init parse_nolapic(char *arg) -{ - enable_local_apic = -1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return 0; -} -early_param("nolapic", parse_nolapic); - -static int __init parse_disable_lapic_timer(char *arg) -{ - local_apic_timer_disabled = 1; - return 0; -} -early_param("nolapic_timer", parse_disable_lapic_timer); - -static int __init parse_lapic_timer_c2_ok(char *arg) -{ - local_apic_timer_c2_ok = 1; - return 0; -} -early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); - -static int __init apic_set_verbosity(char *str) -{ - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - return 1; -} - -__setup("apic=", apic_set_verbosity); - - -/* - * Local APIC interrupts - */ - -/* - * This interrupt should _never_ happen with our APIC/SMP architecture - */ -void smp_spurious_interrupt(struct pt_regs *regs) -{ - unsigned long v; - - irq_enter(); - /* - * Check if this really is a spurious interrupt and ACK it - * if it is a vectored one. Just in case... - * Spurious interrupts should not be ACKed. - */ - v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); - if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) - ack_APIC_irq(); - - /* see sw-dev-man vol 3, chapter 7.4.13.5 */ - printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " - "should never happen.\n", smp_processor_id()); - irq_exit(); -} - -/* - * This interrupt should never happen with our APIC/SMP architecture - */ -void smp_error_interrupt(struct pt_regs *regs) -{ - unsigned long v, v1; - - irq_enter(); - /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); - apic_write(APIC_ESR, 0); - v1 = apic_read(APIC_ESR); - ack_APIC_irq(); - atomic_inc(&irq_err_count); - - /* Here is what the APIC error bits mean: - 0: Send CS error - 1: Receive CS error - 2: Send accept error - 3: Receive accept error - 4: Reserved - 5: Send illegal vector - 6: Received illegal vector - 7: Illegal register address - */ - printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", - smp_processor_id(), v , v1); - irq_exit(); -} - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - -/** - * connect_bsp_APIC - attach the APIC to the interrupt system - */ -void __init connect_bsp_APIC(void) -{ - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's - * local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, " - "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } - enable_apic_mode(); -} - -/** - * disconnect_bsp_APIC - detach the APIC from the interrupt system - * @virt_wire_setup: indicates, whether virtual wire mode is selected - * - * Virtual wire mode is necessary to deliver legacy interrupts even when the - * APIC is disabled. - */ -void disconnect_bsp_APIC(int virt_wire_setup) -{ - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect only on - * certain older boards). Note that APIC interrupts, including - * IPIs, won't work beyond this point! The only exception are - * INIT IPIs. - */ - apic_printk(APIC_VERBOSE, "disabling APIC mode, " - "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } - - /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled - */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); - } -} - -/* - * Power management - */ -#ifdef CONFIG_PM - -static struct { - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = lapic_get_maxlvt(); - - apic_pm_state.apic_id = apic_read(APIC_ID); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; -} - -static int lapic_resume(struct sys_device *dev) -{ - unsigned int l, h; - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = lapic_get_maxlvt(); - - local_irq_save(flags); - - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; -} - -/* - * This device has no shutdown method - fully functioning local APICs - * are needed on every CPU up until machine_halt/restart/poweroff. - */ - -static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), - .resume = lapic_resume, - .suspend = lapic_suspend, -}; - -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; - -static void __devinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} - -static int __init init_lapic_sysfs(void) -{ - int error; - - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ - - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); - -#else /* CONFIG_PM */ - -static void apic_pm_activate(void) { } - -#endif /* CONFIG_PM */ diff --git a/arch/i386/kernel/apm_32.c b/arch/i386/kernel/apm_32.c deleted file mode 100644 index f02a8ac..0000000 --- a/arch/i386/kernel/apm_32.c +++ /dev/null @@ -1,2403 +0,0 @@ -/* -*- linux-c -*- - * APM BIOS driver for Linux - * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) - * - * Initial development of this driver was funded by NEC Australia P/L - * and NEC Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * October 1995, Rik Faith (faith@cs.unc.edu): - * Minor enhancements and updates (to the patch set) for 1.3.x - * Documentation - * January 1996, Rik Faith (faith@cs.unc.edu): - * Make /proc/apm easy to format (bump driver version) - * March 1996, Rik Faith (faith@cs.unc.edu): - * Prohibit APM BIOS calls unless apm_enabled. - * (Thanks to Ulrich Windl ) - * April 1996, Stephen Rothwell (sfr@canb.auug.org.au) - * Version 1.0 and 1.1 - * May 1996, Version 1.2 - * Feb 1998, Version 1.3 - * Feb 1998, Version 1.4 - * Aug 1998, Version 1.5 - * Sep 1998, Version 1.6 - * Nov 1998, Version 1.7 - * Jan 1999, Version 1.8 - * Jan 1999, Version 1.9 - * Oct 1999, Version 1.10 - * Nov 1999, Version 1.11 - * Jan 2000, Version 1.12 - * Feb 2000, Version 1.13 - * Nov 2000, Version 1.14 - * Oct 2001, Version 1.15 - * Jan 2002, Version 1.16 - * Oct 2002, Version 1.16ac - * - * History: - * 0.6b: first version in official kernel, Linux 1.3.46 - * 0.7: changed /proc/apm format, Linux 1.3.58 - * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59 - * 0.9: only call bios if bios is present, Linux 1.3.72 - * 1.0: use fixed device number, consolidate /proc/apm into this file, - * Linux 1.3.85 - * 1.1: support user-space standby and suspend, power off after system - * halted, Linux 1.3.98 - * 1.2: When resetting RTC after resume, take care so that the time - * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth - * ); improve interaction between - * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4 - * 1.2a:Simple change to stop mysterious bug reports with SMP also added - * levels to the printk calls. APM is not defined for SMP machines. - * The new replacment for it is, but Linux doesn't yet support this. - * Alan Cox Linux 2.1.55 - * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's - * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by - * Dean Gaudet . - * C. Scott Ananian Linux 2.1.87 - * 1.5: Fix segment register reloading (in case of bad segments saved - * across BIOS call). - * Stephen Rothwell - * 1.6: Cope with complier/assembler differences. - * Only try to turn off the first display device. - * Fix OOPS at power off with no APM BIOS by Jan Echternach - * - * Stephen Rothwell - * 1.7: Modify driver's cached copy of the disabled/disengaged flags - * to reflect current state of APM BIOS. - * Chris Rankin - * Reset interrupt 0 timer to 100Hz after suspend - * Chad Miller - * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE - * Richard Gooch - * Allow boot time disabling of APM - * Make boot messages far less verbose by default - * Make asm safer - * Stephen Rothwell - * 1.8: Add CONFIG_APM_RTC_IS_GMT - * Richard Gooch - * change APM_NOINTS to CONFIG_APM_ALLOW_INTS - * remove dependency on CONFIG_PROC_FS - * Stephen Rothwell - * 1.9: Fix small typo. - * Try to cope with BIOS's that need to have all display - * devices blanked and not just the first one. - * Ross Paterson - * Fix segment limit setting it has always been wrong as - * the segments needed to have byte granularity. - * Mark a few things __init. - * Add hack to allow power off of SMP systems by popular request. - * Use CONFIG_SMP instead of __SMP__ - * Ignore BOUNCES for three seconds. - * Stephen Rothwell - * 1.10: Fix for Thinkpad return code. - * Merge 2.2 and 2.3 drivers. - * Remove APM dependencies in arch/i386/kernel/process.c - * Remove APM dependencies in drivers/char/sysrq.c - * Reset time across standby. - * Allow more inititialisation on SMP. - * Remove CONFIG_APM_POWER_OFF and make it boot time - * configurable (default on). - * Make debug only a boot time parameter (remove APM_DEBUG). - * Try to blank all devices on any error. - * 1.11: Remove APM dependencies in drivers/char/console.c - * Check nr_running to detect if we are idle (from - * Borislav Deianov ) - * Fix for bioses that don't zero the top part of the - * entrypoint offset (Mario Sitta ) - * (reported by Panos Katsaloulis ). - * Real mode power off patch (Walter Hofmann - * ). - * 1.12: Remove CONFIG_SMP as the compiler will optimize - * the code away anyway (smp_num_cpus == 1 in UP) - * noted by Artur Skawina . - * Make power off under SMP work again. - * Fix thinko with initial engaging of BIOS. - * Make sure power off only happens on CPU 0 - * (Paul "Rusty" Russell ). - * Do error notification to user mode if BIOS calls fail. - * Move entrypoint offset fix to ...boot/setup.S - * where it belongs (Cosmos ). - * Remove smp-power-off. SMP users must now specify - * "apm=power-off" on the kernel command line. Suggested - * by Jim Avera , modified by Alan Cox - * . - * Register the /proc/apm entry even on SMP so that - * scripts that check for it before doing power off - * work (Jim Avera ). - * 1.13: Changes for new pm_ interfaces (Andy Henroid - * ). - * Modularize the code. - * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS - * is now the way life works). - * Fix thinko in suspend() (wrong return). - * Notify drivers on critical suspend. - * Make kapmd absorb more idle time (Pavel Machek - * modified by sfr). - * Disable interrupts while we are suspended (Andy Henroid - * fixed by sfr). - * Make power off work on SMP again (Tony Hoyle - * and ) modified by sfr. - * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore - * interval is now configurable. - * 1.14: Make connection version persist across module unload/load. - * Enable and engage power management earlier. - * Disengage power management on module unload. - * Changed to use the sysrq-register hack for registering the - * power off function called by magic sysrq based upon discussions - * in irc://irc.openprojects.net/#kernelnewbies - * (Crutcher Dunnavant ). - * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable. - * (Arjan van de Ven ) modified by sfr. - * Work around byte swap bug in one of the Vaio's BIOS's - * (Marc Boucher ). - * Exposed the disable flag to dmi so that we can handle known - * broken APM (Alan Cox ). - * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin - * calling it - instead idle. (Alan Cox ) - * If an APM idle fails log it and idle sensibly - * 1.15: Don't queue events to clients who open the device O_WRONLY. - * Don't expect replies from clients who open the device O_RDONLY. - * (Idea from Thomas Hood) - * Minor waitqueue cleanups. (John Fremlin ) - * 1.16: Fix idle calling. (Andreas Steinmetz et al.) - * Notify listeners of standby or suspend events before notifying - * drivers. Return EBUSY to ioctl() if suspend is rejected. - * (Russell King and Thomas Hood) - * Ignore first resume after we generate our own resume event - * after a suspend (Thomas Hood) - * Daemonize now gets rid of our controlling terminal (sfr). - * CONFIG_APM_CPU_IDLE now just affects the default value of - * idle_threshold (sfr). - * Change name of kernel apm daemon (as it no longer idles) (sfr). - * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we - * make _all_ APM calls on the CPU#0. Fix unsafe sign bug. - * TODO: determine if its "boot CPU" or "CPU0" we want to lock to. - * - * APM 1.1 Reference: - * - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.1, September 1993. - * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01. - * - * [This document is available free from Intel by calling 800.628.8686 (fax - * 916.356.6100) or 800.548.4725; or via anonymous ftp from - * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also - * available from Microsoft by calling 206.882.8080.] - * - * APM 1.2 Reference: - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.2, February 1996. - * - * [This document is available from Microsoft at: - * http://www.microsoft.com/whdc/archive/amp_12.mspx] - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "io_ports.h" - -#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) -extern int (*console_blank_hook)(int); -#endif - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) - * apm=on/off enable/disable APM - * [no-]allow[-_]ints allow interrupts during BIOS calls - * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call - * [no-]realmode[-_]power[-_]off switch to real mode before - * powering off - * [no-]debug log some debugging messages - * [no-]power[-_]off power off on shutdown - * [no-]smp Use apm even on an SMP box - * bounce[-_]interval= number of ticks to ignore suspend - * bounces - * idle[-_]threshold= System idle percentage above which to - * make APM BIOS idle calls. Set it to - * 100 to disable. - * idle[-_]period= Period (in 1/100s of a second) over - * which the idle percentage is - * calculated. - */ - -/* KNOWN PROBLEM MACHINES: - * - * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant - * [Confirmed by TI representative] - * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification - * [Confirmed by BIOS disassembly] - * [This may work now ...] - * P: Toshiba 1950S: battery life information only gets updated after resume - * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking - * broken in BIOS [Reported by Garst R. Reese ] - * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP - * Neale Banks December 2000 - * - * Legend: U = unusable with APM patches - * P = partially usable with APM patches - */ - -/* - * Define as 1 to make the driver always call the APM BIOS busy - * routine even if the clock was not reported as slowed by the - * idle routine. Otherwise, define as 0. - */ -#define ALWAYS_CALL_BUSY 1 - -/* - * Define to make the APM BIOS calls zero all data segment registers (so - * that an incorrect BIOS implementation will cause a kernel panic if it - * tries to write to arbitrary memory). - */ -#define APM_ZERO_SEGS - -#include "apm.h" - -/* - * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend. - * This patched by Chad Miller , original code by - * David Chen - */ -#undef INIT_TIMER_AFTER_SUSPEND - -#ifdef INIT_TIMER_AFTER_SUSPEND -#include -#include -#include -#endif - -/* - * Need to poll the APM BIOS every second - */ -#define APM_CHECK_TIMEOUT (HZ) - -/* - * Ignore suspend events for this amount of time after a resume - */ -#define DEFAULT_BOUNCE_INTERVAL (3 * HZ) - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 20 - -/* - * The per-file APM data - */ -struct apm_user { - int magic; - struct apm_user * next; - unsigned int suser: 1; - unsigned int writer: 1; - unsigned int reader: 1; - unsigned int suspend_wait: 1; - int suspend_result; - int suspends_pending; - int standbys_pending; - int suspends_read; - int standbys_read; - int event_head; - int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The magic number in apm_user - */ -#define APM_BIOS_MAGIC 0x4101 - -/* - * idle percentage above which bios idle calls are done - */ -#ifdef CONFIG_APM_CPU_IDLE -#define DEFAULT_IDLE_THRESHOLD 95 -#else -#define DEFAULT_IDLE_THRESHOLD 100 -#endif -#define DEFAULT_IDLE_PERIOD (100 / 3) - -/* - * Local variables - */ -static struct { - unsigned long offset; - unsigned short segment; -} apm_bios_entry; -static int clock_slowed; -static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD; -static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD; -static int set_pm_idle; -static int suspends_pending; -static int standbys_pending; -static int ignore_sys_suspend; -static int ignore_normal_resume; -static int bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL; - -static int debug __read_mostly; -static int smp __read_mostly; -static int apm_disabled = -1; -#ifdef CONFIG_SMP -static int power_off; -#else -static int power_off = 1; -#endif -#ifdef CONFIG_APM_REAL_MODE_POWER_OFF -static int realmode_power_off = 1; -#else -static int realmode_power_off; -#endif -#ifdef CONFIG_APM_ALLOW_INTS -static int allow_ints = 1; -#else -static int allow_ints; -#endif -static int broken_psr; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); -static struct apm_user * user_list; -static DEFINE_SPINLOCK(user_list_lock); -static const struct desc_struct bad_bios_desc = { 0, 0x00409200 }; - -static const char driver_version[] = "1.16ac"; /* no spaces */ - -static struct task_struct *kapmd_task; - -/* - * APM event names taken from the APM 1.2 specification. These are - * the message codes that the BIOS uses to tell us about events - */ -static const char * const apm_event_name[] = { - "system standby", - "system suspend", - "normal resume", - "critical resume", - "low battery", - "power status change", - "update time", - "critical suspend", - "user standby", - "user suspend", - "system standby resume", - "capabilities change" -}; -#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) - -typedef struct lookup_t { - int key; - char * msg; -} lookup_t; - -/* - * The BIOS returns a set of standard error codes in AX when the - * carry flag is set. - */ - -static const lookup_t error_table[] = { -/* N/A { APM_SUCCESS, "Operation succeeded" }, */ - { APM_DISABLED, "Power management disabled" }, - { APM_CONNECTED, "Real mode interface already connected" }, - { APM_NOT_CONNECTED, "Interface not connected" }, - { APM_16_CONNECTED, "16 bit interface already connected" }, -/* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */ - { APM_32_CONNECTED, "32 bit interface already connected" }, - { APM_32_UNSUPPORTED, "32 bit interface not supported" }, - { APM_BAD_DEVICE, "Unrecognized device ID" }, - { APM_BAD_PARAM, "Parameter out of range" }, - { APM_NOT_ENGAGED, "Interface not engaged" }, - { APM_BAD_FUNCTION, "Function not supported" }, - { APM_RESUME_DISABLED, "Resume timer disabled" }, - { APM_BAD_STATE, "Unable to enter requested state" }, -/* N/A { APM_NO_EVENTS, "No events pending" }, */ - { APM_NO_ERROR, "BIOS did not set a return code" }, - { APM_NOT_PRESENT, "No APM present" } -}; -#define ERROR_COUNT ARRAY_SIZE(error_table) - -/** - * apm_error - display an APM error - * @str: information string - * @err: APM BIOS return code - * - * Write a meaningful log entry to the kernel log in the event of - * an APM error. - */ - -static void apm_error(char *str, int err) -{ - int i; - - for (i = 0; i < ERROR_COUNT; i++) - if (error_table[i].key == err) break; - if (i < ERROR_COUNT) - printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg); - else - printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n", - str, err); -} - -/* - * Lock APM functionality to physical CPU 0 - */ - -#ifdef CONFIG_SMP - -static cpumask_t apm_save_cpus(void) -{ - cpumask_t x = current->cpus_allowed; - /* Some bioses don't like being called from CPU != 0 */ - set_cpus_allowed(current, cpumask_of_cpu(0)); - BUG_ON(smp_processor_id() != 0); - return x; -} - -static inline void apm_restore_cpus(cpumask_t mask) -{ - set_cpus_allowed(current, mask); -} - -#else - -/* - * No CPU lockdown needed on a uniprocessor - */ - -#define apm_save_cpus() (current->cpus_allowed) -#define apm_restore_cpus(x) (void)(x) - -#endif - -/* - * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and - * apm_info.allow_ints, we are being really paranoid here! Not only - * are interrupts disabled, but all the segment registers (except SS) - * are saved and zeroed this means that if the BIOS tries to reference - * any data without explicitly loading the segment registers, the kernel - * will fault immediately rather than have some unforeseen circumstances - * for the rest of the kernel. And it will be very obvious! :-) Doing - * this depends on CS referring to the same physical memory as DS so that - * DS can be zeroed before the call. Unfortunately, we can't do anything - * about the stack segment/pointer. Also, we tell the compiler that - * everything could change. - * - * Also, we KNOW that for the non error case of apm_bios_call, there - * is no useful data returned in the low order 8 bits of eax. - */ - -static inline unsigned long __apm_irq_save(void) -{ - unsigned long flags; - local_save_flags(flags); - if (apm_info.allow_ints) { - if (irqs_disabled_flags(flags)) - local_irq_enable(); - } else - local_irq_disable(); - - return flags; -} - -#define apm_irq_save(flags) \ - do { flags = __apm_irq_save(); } while (0) - -static inline void apm_irq_restore(unsigned long flags) -{ - if (irqs_disabled_flags(flags)) - local_irq_disable(); - else if (irqs_disabled()) - local_irq_enable(); -} - -#ifdef APM_ZERO_SEGS -# define APM_DECL_SEGS \ - unsigned int saved_fs; unsigned int saved_gs; -# define APM_DO_SAVE_SEGS \ - savesegment(fs, saved_fs); savesegment(gs, saved_gs) -# define APM_DO_RESTORE_SEGS \ - loadsegment(fs, saved_fs); loadsegment(gs, saved_gs) -#else -# define APM_DECL_SEGS -# define APM_DO_SAVE_SEGS -# define APM_DO_RESTORE_SEGS -#endif - -/** - * apm_bios_call - Make an APM BIOS 32bit call - * @func: APM function to execute - * @ebx_in: EBX register for call entry - * @ecx_in: ECX register for call entry - * @eax: EAX register return - * @ebx: EBX register return - * @ecx: ECX register return - * @edx: EDX register return - * @esi: ESI register return - * - * Make an APM call using the 32bit protected mode interface. The - * caller is responsible for knowing if APM BIOS is configured and - * enabled. This call can disable interrupts for a long period of - * time on some laptops. The return value is in AH and the carry - * flag is loaded into AL. If there is an error, then the error - * code is returned in AH (bits 8-15 of eax) and this function - * returns non-zero. - */ - -static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, - u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi) -{ - APM_DECL_SEGS - unsigned long flags; - cpumask_t cpus; - int cpu; - struct desc_struct save_desc_40; - struct desc_struct *gdt; - - cpus = apm_save_cpus(); - - cpu = get_cpu(); - gdt = get_cpu_gdt_table(cpu); - save_desc_40 = gdt[0x40 / 8]; - gdt[0x40 / 8] = bad_bios_desc; - - apm_irq_save(flags); - APM_DO_SAVE_SEGS; - apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi); - APM_DO_RESTORE_SEGS; - apm_irq_restore(flags); - gdt[0x40 / 8] = save_desc_40; - put_cpu(); - apm_restore_cpus(cpus); - - return *eax & 0xff; -} - -/** - * apm_bios_call_simple - make a simple APM BIOS 32bit call - * @func: APM function to invoke - * @ebx_in: EBX register value for BIOS call - * @ecx_in: ECX register value for BIOS call - * @eax: EAX register on return from the BIOS call - * - * Make a BIOS call that returns one value only, or just status. - * If there is an error, then the error code is returned in AH - * (bits 8-15 of eax) and this function returns non-zero. This is - * used for simpler BIOS operations. This call may hold interrupts - * off for a long time on some laptops. - */ - -static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) -{ - u8 error; - APM_DECL_SEGS - unsigned long flags; - cpumask_t cpus; - int cpu; - struct desc_struct save_desc_40; - struct desc_struct *gdt; - - cpus = apm_save_cpus(); - - cpu = get_cpu(); - gdt = get_cpu_gdt_table(cpu); - save_desc_40 = gdt[0x40 / 8]; - gdt[0x40 / 8] = bad_bios_desc; - - apm_irq_save(flags); - APM_DO_SAVE_SEGS; - error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax); - APM_DO_RESTORE_SEGS; - apm_irq_restore(flags); - gdt[0x40 / 8] = save_desc_40; - put_cpu(); - apm_restore_cpus(cpus); - return error; -} - -/** - * apm_driver_version - APM driver version - * @val: loaded with the APM version on return - * - * Retrieve the APM version supported by the BIOS. This is only - * supported for APM 1.1 or higher. An error indicates APM 1.0 is - * probably present. - * - * On entry val should point to a value indicating the APM driver - * version with the high byte being the major and the low byte the - * minor number both in BCD - * - * On return it will hold the BIOS revision supported in the - * same format. - */ - -static int apm_driver_version(u_short *val) -{ - u32 eax; - - if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax)) - return (eax >> 8) & 0xff; - *val = eax; - return APM_SUCCESS; -} - -/** - * apm_get_event - get an APM event from the BIOS - * @event: pointer to the event - * @info: point to the event information - * - * The APM BIOS provides a polled information for event - * reporting. The BIOS expects to be polled at least every second - * when events are pending. When a message is found the caller should - * poll until no more messages are present. However, this causes - * problems on some laptops where a suspend event notification is - * not cleared until it is acknowledged. - * - * Additional information is returned in the info pointer, providing - * that APM 1.2 is in use. If no messges are pending the value 0x80 - * is returned (No power management events pending). - */ - -static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info) -{ - u32 eax; - u32 ebx; - u32 ecx; - u32 dummy; - - if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx, - &dummy, &dummy)) - return (eax >> 8) & 0xff; - *event = ebx; - if (apm_info.connection_version < 0x0102) - *info = ~0; /* indicate info not valid */ - else - *info = ecx; - return APM_SUCCESS; -} - -/** - * set_power_state - set the power management state - * @what: which items to transition - * @state: state to transition to - * - * Request an APM change of state for one or more system devices. The - * processor state must be transitioned last of all. what holds the - * class of device in the upper byte and the device number (0xFF for - * all) for the object to be transitioned. - * - * The state holds the state to transition to, which may in fact - * be an acceptance of a BIOS requested state change. - */ - -static int set_power_state(u_short what, u_short state) -{ - u32 eax; - - if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax)) - return (eax >> 8) & 0xff; - return APM_SUCCESS; -} - -/** - * set_system_power_state - set system wide power state - * @state: which state to enter - * - * Transition the entire system into a new APM power state. - */ - -static int set_system_power_state(u_short state) -{ - return set_power_state(APM_DEVICE_ALL, state); -} - -/** - * apm_do_idle - perform power saving - * - * This function notifies the BIOS that the processor is (in the view - * of the OS) idle. It returns -1 in the event that the BIOS refuses - * to handle the idle request. On a success the function returns 1 - * if the BIOS did clock slowing or 0 otherwise. - */ - -static int apm_do_idle(void) -{ - u32 eax; - u8 ret = 0; - int idled = 0; - int polling; - - polling = !!(current_thread_info()->status & TS_POLLING); - if (polling) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - } - if (!need_resched()) { - idled = 1; - ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); - } - if (polling) - current_thread_info()->status |= TS_POLLING; - - if (!idled) - return 0; - - if (ret) { - static unsigned long t; - - /* This always fails on some SMP boards running UP kernels. - * Only report the failure the first 5 times. - */ - if (++t < 5) - { - printk(KERN_DEBUG "apm_do_idle failed (%d)\n", - (eax >> 8) & 0xff); - t = jiffies; - } - return -1; - } - clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0; - return clock_slowed; -} - -/** - * apm_do_busy - inform the BIOS the CPU is busy - * - * Request that the BIOS brings the CPU back to full performance. - */ - -static void apm_do_busy(void) -{ - u32 dummy; - - if (clock_slowed || ALWAYS_CALL_BUSY) { - (void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy); - clock_slowed = 0; - } -} - -/* - * If no process has really been interested in - * the CPU for some time, we want to call BIOS - * power management - we probably want - * to conserve power. - */ -#define IDLE_CALC_LIMIT (HZ * 100) -#define IDLE_LEAKY_MAX 16 - -static void (*original_pm_idle)(void) __read_mostly; - -/** - * apm_cpu_idle - cpu idling for APM capable Linux - * - * This is the idling function the kernel executes when APM is available. It - * tries to do BIOS powermanagement based on the average system idle time. - * Furthermore it calls the system default idle routine. - */ - -static void apm_cpu_idle(void) -{ - static int use_apm_idle; /* = 0 */ - static unsigned int last_jiffies; /* = 0 */ - static unsigned int last_stime; /* = 0 */ - - int apm_idle_done = 0; - unsigned int jiffies_since_last_check = jiffies - last_jiffies; - unsigned int bucket; - -recalc: - if (jiffies_since_last_check > IDLE_CALC_LIMIT) { - use_apm_idle = 0; - last_jiffies = jiffies; - last_stime = current->stime; - } else if (jiffies_since_last_check > idle_period) { - unsigned int idle_percentage; - - idle_percentage = current->stime - last_stime; - idle_percentage *= 100; - idle_percentage /= jiffies_since_last_check; - use_apm_idle = (idle_percentage > idle_threshold); - if (apm_info.forbid_idle) - use_apm_idle = 0; - last_jiffies = jiffies; - last_stime = current->stime; - } - - bucket = IDLE_LEAKY_MAX; - - while (!need_resched()) { - if (use_apm_idle) { - unsigned int t; - - t = jiffies; - switch (apm_do_idle()) { - case 0: apm_idle_done = 1; - if (t != jiffies) { - if (bucket) { - bucket = IDLE_LEAKY_MAX; - continue; - } - } else if (bucket) { - bucket--; - continue; - } - break; - case 1: apm_idle_done = 1; - break; - default: /* BIOS refused */ - break; - } - } - if (original_pm_idle) - original_pm_idle(); - else - default_idle(); - jiffies_since_last_check = jiffies - last_jiffies; - if (jiffies_since_last_check > idle_period) - goto recalc; - } - - if (apm_idle_done) - apm_do_busy(); -} - -/** - * apm_power_off - ask the BIOS to power off - * - * Handle the power off sequence. This is the one piece of code we - * will execute even on SMP machines. In order to deal with BIOS - * bugs we support real mode APM BIOS power off calls. We also make - * the SMP call on CPU0 as some systems will only honour this call - * on their first cpu. - */ - -static void apm_power_off(void) -{ - unsigned char po_bios_call[] = { - 0xb8, 0x00, 0x10, /* movw $0x1000,ax */ - 0x8e, 0xd0, /* movw ax,ss */ - 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */ - 0xb8, 0x07, 0x53, /* movw $0x5307,ax */ - 0xbb, 0x01, 0x00, /* movw $0x0001,bx */ - 0xb9, 0x03, 0x00, /* movw $0x0003,cx */ - 0xcd, 0x15 /* int $0x15 */ - }; - - /* Some bioses don't like being called from CPU != 0 */ - if (apm_info.realmode_power_off) - { - (void)apm_save_cpus(); - machine_real_restart(po_bios_call, sizeof(po_bios_call)); - } - else - (void) set_system_power_state(APM_STATE_OFF); -} - -#ifdef CONFIG_APM_DO_ENABLE - -/** - * apm_enable_power_management - enable BIOS APM power management - * @enable: enable yes/no - * - * Enable or disable the APM BIOS power services. - */ - -static int apm_enable_power_management(int enable) -{ - u32 eax; - - if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED)) - return APM_NOT_ENGAGED; - if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL, - enable, &eax)) - return (eax >> 8) & 0xff; - if (enable) - apm_info.bios.flags &= ~APM_BIOS_DISABLED; - else - apm_info.bios.flags |= APM_BIOS_DISABLED; - return APM_SUCCESS; -} -#endif - -/** - * apm_get_power_status - get current power state - * @status: returned status - * @bat: battery info - * @life: estimated life - * - * Obtain the current power status from the APM BIOS. We return a - * status which gives the rough battery status, and current power - * source. The bat value returned give an estimate as a percentage - * of life and a status value for the battery. The estimated life - * if reported is a lifetime in secodnds/minutes at current powwer - * consumption. - */ - -static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) -{ - u32 eax; - u32 ebx; - u32 ecx; - u32 edx; - u32 dummy; - - if (apm_info.get_power_status_broken) - return APM_32_UNSUPPORTED; - if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0, - &eax, &ebx, &ecx, &edx, &dummy)) - return (eax >> 8) & 0xff; - *status = ebx; - *bat = ecx; - if (apm_info.get_power_status_swabinminutes) { - *life = swab16((u16)edx); - *life |= 0x8000; - } else - *life = edx; - return APM_SUCCESS; -} - -#if 0 -static int apm_get_battery_status(u_short which, u_short *status, - u_short *bat, u_short *life, u_short *nbat) -{ - u32 eax; - u32 ebx; - u32 ecx; - u32 edx; - u32 esi; - - if (apm_info.connection_version < 0x0102) { - /* pretend we only have one battery. */ - if (which != 1) - return APM_BAD_DEVICE; - *nbat = 1; - return apm_get_power_status(status, bat, life); - } - - if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax, - &ebx, &ecx, &edx, &esi)) - return (eax >> 8) & 0xff; - *status = ebx; - *bat = ecx; - *life = edx; - *nbat = esi; - return APM_SUCCESS; -} -#endif - -/** - * apm_engage_power_management - enable PM on a device - * @device: identity of device - * @enable: on/off - * - * Activate or deactive power management on either a specific device - * or the entire system (%APM_DEVICE_ALL). - */ - -static int apm_engage_power_management(u_short device, int enable) -{ - u32 eax; - - if ((enable == 0) && (device == APM_DEVICE_ALL) - && (apm_info.bios.flags & APM_BIOS_DISABLED)) - return APM_DISABLED; - if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax)) - return (eax >> 8) & 0xff; - if (device == APM_DEVICE_ALL) { - if (enable) - apm_info.bios.flags &= ~APM_BIOS_DISENGAGED; - else - apm_info.bios.flags |= APM_BIOS_DISENGAGED; - } - return APM_SUCCESS; -} - -#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) - -/** - * apm_console_blank - blank the display - * @blank: on/off - * - * Attempt to blank the console, firstly by blanking just video device - * zero, and if that fails (some BIOSes don't support it) then it blanks - * all video devices. Typically the BIOS will do laptop backlight and - * monitor powerdown for us. - */ - -static int apm_console_blank(int blank) -{ - int error = APM_NOT_ENGAGED; /* silence gcc */ - int i; - u_short state; - static const u_short dev[3] = { 0x100, 0x1FF, 0x101 }; - - state = blank ? APM_STATE_STANDBY : APM_STATE_READY; - - for (i = 0; i < ARRAY_SIZE(dev); i++) { - error = set_power_state(dev[i], state); - - if ((error == APM_SUCCESS) || (error == APM_NO_ERROR)) - return 1; - - if (error == APM_NOT_ENGAGED) - break; - } - - if (error == APM_NOT_ENGAGED) { - static int tried; - int eng_error; - if (tried++ == 0) { - eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1); - if (eng_error) { - apm_error("set display", error); - apm_error("engage interface", eng_error); - return 0; - } else - return apm_console_blank(blank); - } - } - apm_error("set display", error); - return 0; -} -#endif - -static int queue_empty(struct apm_user *as) -{ - return as->event_head == as->event_tail; -} - -static apm_event_t get_queued_event(struct apm_user *as) -{ - if (++as->event_tail >= APM_MAX_EVENTS) - as->event_tail = 0; - return as->events[as->event_tail]; -} - -static void queue_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user * as; - - spin_lock(&user_list_lock); - if (user_list == NULL) - goto out; - for (as = user_list; as != NULL; as = as->next) { - if ((as == sender) || (!as->reader)) - continue; - if (++as->event_head >= APM_MAX_EVENTS) - as->event_head = 0; - - if (as->event_head == as->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm: an event queue overflowed\n"); - if (++as->event_tail >= APM_MAX_EVENTS) - as->event_tail = 0; - } - as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) - continue; - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - as->suspends_pending++; - suspends_pending++; - break; - - case APM_SYS_STANDBY: - case APM_USER_STANDBY: - as->standbys_pending++; - standbys_pending++; - break; - } - } - wake_up_interruptible(&apm_waitqueue); -out: - spin_unlock(&user_list_lock); -} - -static void reinit_timer(void) -{ -#ifdef INIT_TIMER_AFTER_SUSPEND - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - /* set the clock to HZ */ - outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff, PIT_CH0); /* LSB */ - udelay(10); - outb(LATCH >> 8, PIT_CH0); /* MSB */ - udelay(10); - spin_unlock_irqrestore(&i8253_lock, flags); -#endif -} - -static int suspend(int vetoable) -{ - int err; - struct apm_user *as; - - if (pm_send_all(PM_SUSPEND, (void *)3)) { - /* Vetoed */ - if (vetoable) { - if (apm_info.connection_version > 0x100) - set_system_power_state(APM_STATE_REJECT); - err = -EBUSY; - ignore_sys_suspend = 0; - printk(KERN_WARNING "apm: suspend was vetoed.\n"); - goto out; - } - printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n"); - } - - device_suspend(PMSG_SUSPEND); - local_irq_disable(); - device_power_down(PMSG_SUSPEND); - - local_irq_enable(); - - save_processor_state(); - err = set_system_power_state(APM_STATE_SUSPEND); - ignore_normal_resume = 1; - restore_processor_state(); - - local_irq_disable(); - reinit_timer(); - - if (err == APM_NO_ERROR) - err = APM_SUCCESS; - if (err != APM_SUCCESS) - apm_error("suspend", err); - err = (err == APM_SUCCESS) ? 0 : -EIO; - device_power_up(); - local_irq_enable(); - device_resume(); - pm_send_all(PM_RESUME, (void *)0); - queue_event(APM_NORMAL_RESUME, NULL); - out: - spin_lock(&user_list_lock); - for (as = user_list; as != NULL; as = as->next) { - as->suspend_wait = 0; - as->suspend_result = err; - } - spin_unlock(&user_list_lock); - wake_up_interruptible(&apm_suspend_waitqueue); - return err; -} - -static void standby(void) -{ - int err; - - local_irq_disable(); - device_power_down(PMSG_SUSPEND); - local_irq_enable(); - - err = set_system_power_state(APM_STATE_STANDBY); - if ((err != APM_SUCCESS) && (err != APM_NO_ERROR)) - apm_error("standby", err); - - local_irq_disable(); - device_power_up(); - local_irq_enable(); -} - -static apm_event_t get_event(void) -{ - int error; - apm_event_t event = APM_NO_EVENTS; /* silence gcc */ - apm_eventinfo_t info; - - static int notified; - - /* we don't use the eventinfo */ - error = apm_get_event(&event, &info); - if (error == APM_SUCCESS) - return event; - - if ((error != APM_NO_EVENTS) && (notified++ == 0)) - apm_error("get_event", error); - - return 0; -} - -static void check_events(void) -{ - apm_event_t event; - static unsigned long last_resume; - static int ignore_bounce; - - while ((event = get_event()) != 0) { - if (debug) { - if (event <= NR_APM_EVENT_NAME) - printk(KERN_DEBUG "apm: received %s notify\n", - apm_event_name[event - 1]); - else - printk(KERN_DEBUG "apm: received unknown " - "event 0x%02x\n", event); - } - if (ignore_bounce - && ((jiffies - last_resume) > bounce_interval)) - ignore_bounce = 0; - - switch (event) { - case APM_SYS_STANDBY: - case APM_USER_STANDBY: - queue_event(event, NULL); - if (standbys_pending <= 0) - standby(); - break; - - case APM_USER_SUSPEND: -#ifdef CONFIG_APM_IGNORE_USER_SUSPEND - if (apm_info.connection_version > 0x100) - set_system_power_state(APM_STATE_REJECT); - break; -#endif - case APM_SYS_SUSPEND: - if (ignore_bounce) { - if (apm_info.connection_version > 0x100) - set_system_power_state(APM_STATE_REJECT); - break; - } - /* - * If we are already processing a SUSPEND, - * then further SUSPEND events from the BIOS - * will be ignored. We also return here to - * cope with the fact that the Thinkpads keep - * sending a SUSPEND event until something else - * happens! - */ - if (ignore_sys_suspend) - return; - ignore_sys_suspend = 1; - queue_event(event, NULL); - if (suspends_pending <= 0) - (void) suspend(1); - break; - - case APM_NORMAL_RESUME: - case APM_CRITICAL_RESUME: - case APM_STANDBY_RESUME: - ignore_sys_suspend = 0; - last_resume = jiffies; - ignore_bounce = 1; - if ((event != APM_NORMAL_RESUME) - || (ignore_normal_resume == 0)) { - device_resume(); - pm_send_all(PM_RESUME, (void *)0); - queue_event(event, NULL); - } - ignore_normal_resume = 0; - break; - - case APM_CAPABILITY_CHANGE: - case APM_LOW_BATTERY: - case APM_POWER_STATUS_CHANGE: - queue_event(event, NULL); - /* If needed, notify drivers here */ - break; - - case APM_UPDATE_TIME: - break; - - case APM_CRITICAL_SUSPEND: - /* - * We are not allowed to reject a critical suspend. - */ - (void) suspend(0); - break; - } - } -} - -static void apm_event_handler(void) -{ - static int pending_count = 4; - int err; - - if ((standbys_pending > 0) || (suspends_pending > 0)) { - if ((apm_info.connection_version > 0x100) && - (pending_count-- <= 0)) { - pending_count = 4; - if (debug) - printk(KERN_DEBUG "apm: setting state busy\n"); - err = set_system_power_state(APM_STATE_BUSY); - if (err) - apm_error("busy", err); - } - } else - pending_count = 4; - check_events(); -} - -/* - * This is the APM thread main loop. - */ - -static void apm_mainloop(void) -{ - DECLARE_WAITQUEUE(wait, current); - - add_wait_queue(&apm_waitqueue, &wait); - set_current_state(TASK_INTERRUPTIBLE); - for (;;) { - schedule_timeout(APM_CHECK_TIMEOUT); - if (kthread_should_stop()) - break; - /* - * Ok, check all events, check for idle (and mark us sleeping - * so as not to count towards the load average).. - */ - set_current_state(TASK_INTERRUPTIBLE); - apm_event_handler(); - } - remove_wait_queue(&apm_waitqueue, &wait); -} - -static int check_apm_user(struct apm_user *as, const char *func) -{ - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { - printk(KERN_ERR "apm: %s passed bad filp\n", func); - return 1; - } - return 0; -} - -static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) -{ - struct apm_user * as; - int i; - apm_event_t event; - - as = fp->private_data; - if (check_apm_user(as, "read")) - return -EIO; - if ((int)count < sizeof(apm_event_t)) - return -EINVAL; - if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK)) - return -EAGAIN; - wait_event_interruptible(apm_waitqueue, !queue_empty(as)); - i = count; - while ((i >= sizeof(event)) && !queue_empty(as)) { - event = get_queued_event(as); - if (copy_to_user(buf, &event, sizeof(event))) { - if (i < count) - break; - return -EFAULT; - } - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - as->suspends_read++; - break; - - case APM_SYS_STANDBY: - case APM_USER_STANDBY: - as->standbys_read++; - break; - } - buf += sizeof(event); - i -= sizeof(event); - } - if (i < count) - return count - i; - if (signal_pending(current)) - return -ERESTARTSYS; - return 0; -} - -static unsigned int do_poll(struct file *fp, poll_table * wait) -{ - struct apm_user * as; - - as = fp->private_data; - if (check_apm_user(as, "poll")) - return 0; - poll_wait(fp, &apm_waitqueue, wait); - if (!queue_empty(as)) - return POLLIN | POLLRDNORM; - return 0; -} - -static int do_ioctl(struct inode * inode, struct file *filp, - u_int cmd, u_long arg) -{ - struct apm_user * as; - - as = filp->private_data; - if (check_apm_user(as, "ioctl")) - return -EIO; - if ((!as->suser) || (!as->writer)) - return -EPERM; - switch (cmd) { - case APM_IOC_STANDBY: - if (as->standbys_read > 0) { - as->standbys_read--; - as->standbys_pending--; - standbys_pending--; - } else - queue_event(APM_USER_STANDBY, as); - if (standbys_pending <= 0) - standby(); - break; - case APM_IOC_SUSPEND: - if (as->suspends_read > 0) { - as->suspends_read--; - as->suspends_pending--; - suspends_pending--; - } else - queue_event(APM_USER_SUSPEND, as); - if (suspends_pending <= 0) { - return suspend(1); - } else { - as->suspend_wait = 1; - wait_event_interruptible(apm_suspend_waitqueue, - as->suspend_wait == 0); - return as->suspend_result; - } - break; - default: - return -EINVAL; - } - return 0; -} - -static int do_release(struct inode * inode, struct file * filp) -{ - struct apm_user * as; - - as = filp->private_data; - if (check_apm_user(as, "release")) - return 0; - filp->private_data = NULL; - if (as->standbys_pending > 0) { - standbys_pending -= as->standbys_pending; - if (standbys_pending <= 0) - standby(); - } - if (as->suspends_pending > 0) { - suspends_pending -= as->suspends_pending; - if (suspends_pending <= 0) - (void) suspend(1); - } - spin_lock(&user_list_lock); - if (user_list == as) - user_list = as->next; - else { - struct apm_user * as1; - - for (as1 = user_list; - (as1 != NULL) && (as1->next != as); - as1 = as1->next) - ; - if (as1 == NULL) - printk(KERN_ERR "apm: filp not in user list\n"); - else - as1->next = as->next; - } - spin_unlock(&user_list_lock); - kfree(as); - return 0; -} - -static int do_open(struct inode * inode, struct file * filp) -{ - struct apm_user * as; - - as = kmalloc(sizeof(*as), GFP_KERNEL); - if (as == NULL) { - printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n", - sizeof(*as)); - return -ENOMEM; - } - as->magic = APM_BIOS_MAGIC; - as->event_tail = as->event_head = 0; - as->suspends_pending = as->standbys_pending = 0; - as->suspends_read = as->standbys_read = 0; - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; - as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; - spin_lock(&user_list_lock); - as->next = user_list; - user_list = as; - spin_unlock(&user_list_lock); - filp->private_data = as; - return 0; -} - -static int proc_apm_show(struct seq_file *m, void *v) -{ - unsigned short bx; - unsigned short cx; - unsigned short dx; - int error; - unsigned short ac_line_status = 0xff; - unsigned short battery_status = 0xff; - unsigned short battery_flag = 0xff; - int percentage = -1; - int time_units = -1; - char *units = "?"; - - if ((num_online_cpus() == 1) && - !(error = apm_get_power_status(&bx, &cx, &dx))) { - ac_line_status = (bx >> 8) & 0xff; - battery_status = bx & 0xff; - if ((cx & 0xff) != 0xff) - percentage = cx & 0xff; - - if (apm_info.connection_version > 0x100) { - battery_flag = (cx >> 8) & 0xff; - if (dx != 0xffff) { - units = (dx & 0x8000) ? "min" : "sec"; - time_units = dx & 0x7fff; - } - } - } - /* Arguments, with symbols from linux/apm_bios.h. Information is - from the Get Power Status (0x0a) call unless otherwise noted. - - 0) Linux driver version (this will change if format changes) - 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - 2) APM flags from APM Installation Check (0x00): - bit 0: APM_16_BIT_SUPPORT - bit 1: APM_32_BIT_SUPPORT - bit 2: APM_IDLE_SLOWS_CLOCK - bit 3: APM_BIOS_DISABLED - bit 4: APM_BIOS_DISENGAGED - 3) AC line status - 0x00: Off-line - 0x01: On-line - 0x02: On backup power (BIOS >= 1.1 only) - 0xff: Unknown - 4) Battery status - 0x00: High - 0x01: Low - 0x02: Critical - 0x03: Charging - 0x04: Selected battery not present (BIOS >= 1.2 only) - 0xff: Unknown - 5) Battery flag - bit 0: High - bit 1: Low - bit 2: Critical - bit 3: Charging - bit 7: No system battery - 0xff: Unknown - 6) Remaining battery life (percentage of charge): - 0-100: valid - -1: Unknown - 7) Remaining battery life (time units): - Number of remaining minutes or seconds - -1: Unknown - 8) min = minutes; sec = seconds */ - - seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - driver_version, - (apm_info.bios.version >> 8) & 0xff, - apm_info.bios.version & 0xff, - apm_info.bios.flags, - ac_line_status, - battery_status, - battery_flag, - percentage, - time_units, - units); - return 0; -} - -static int proc_apm_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_apm_show, NULL); -} - -static const struct file_operations apm_file_ops = { - .owner = THIS_MODULE, - .open = proc_apm_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int apm(void *unused) -{ - unsigned short bx; - unsigned short cx; - unsigned short dx; - int error; - char * power_stat; - char * bat_stat; - -#ifdef CONFIG_SMP - /* 2002/08/01 - WT - * This is to avoid random crashes at boot time during initialization - * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D. - * Some bioses don't like being called from CPU != 0. - * Method suggested by Ingo Molnar. - */ - set_cpus_allowed(current, cpumask_of_cpu(0)); - BUG_ON(smp_processor_id() != 0); -#endif - - if (apm_info.connection_version == 0) { - apm_info.connection_version = apm_info.bios.version; - if (apm_info.connection_version > 0x100) { - /* - * We only support BIOSs up to version 1.2 - */ - if (apm_info.connection_version > 0x0102) - apm_info.connection_version = 0x0102; - error = apm_driver_version(&apm_info.connection_version); - if (error != APM_SUCCESS) { - apm_error("driver version", error); - /* Fall back to an APM 1.0 connection. */ - apm_info.connection_version = 0x100; - } - } - } - - if (debug) - printk(KERN_INFO "apm: Connection version %d.%d\n", - (apm_info.connection_version >> 8) & 0xff, - apm_info.connection_version & 0xff); - -#ifdef CONFIG_APM_DO_ENABLE - if (apm_info.bios.flags & APM_BIOS_DISABLED) { - /* - * This call causes my NEC UltraLite Versa 33/C to hang if it - * is booted with PM disabled but not in the docking station. - * Unfortunate ... - */ - error = apm_enable_power_management(1); - if (error) { - apm_error("enable power management", error); - return -1; - } - } -#endif - - if ((apm_info.bios.flags & APM_BIOS_DISENGAGED) - && (apm_info.connection_version > 0x0100)) { - error = apm_engage_power_management(APM_DEVICE_ALL, 1); - if (error) { - apm_error("engage power management", error); - return -1; - } - } - - if (debug && (num_online_cpus() == 1 || smp )) { - error = apm_get_power_status(&bx, &cx, &dx); - if (error) - printk(KERN_INFO "apm: power status not available\n"); - else { - switch ((bx >> 8) & 0xff) { - case 0: power_stat = "off line"; break; - case 1: power_stat = "on line"; break; - case 2: power_stat = "on backup power"; break; - default: power_stat = "unknown"; break; - } - switch (bx & 0xff) { - case 0: bat_stat = "high"; break; - case 1: bat_stat = "low"; break; - case 2: bat_stat = "critical"; break; - case 3: bat_stat = "charging"; break; - default: bat_stat = "unknown"; break; - } - printk(KERN_INFO - "apm: AC %s, battery status %s, battery life ", - power_stat, bat_stat); - if ((cx & 0xff) == 0xff) - printk("unknown\n"); - else - printk("%d%%\n", cx & 0xff); - if (apm_info.connection_version > 0x100) { - printk(KERN_INFO - "apm: battery flag 0x%02x, battery life ", - (cx >> 8) & 0xff); - if (dx == 0xffff) - printk("unknown\n"); - else - printk("%d %s\n", dx & 0x7fff, - (dx & 0x8000) ? - "minutes" : "seconds"); - } - } - } - - /* Install our power off handler.. */ - if (power_off) - pm_power_off = apm_power_off; - - if (num_online_cpus() == 1 || smp) { -#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) - console_blank_hook = apm_console_blank; -#endif - apm_mainloop(); -#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) - console_blank_hook = NULL; -#endif - } - - return 0; -} - -#ifndef MODULE -static int __init apm_setup(char *str) -{ - int invert; - - while ((str != NULL) && (*str != '\0')) { - if (strncmp(str, "off", 3) == 0) - apm_disabled = 1; - if (strncmp(str, "on", 2) == 0) - apm_disabled = 0; - if ((strncmp(str, "bounce-interval=", 16) == 0) || - (strncmp(str, "bounce_interval=", 16) == 0)) - bounce_interval = simple_strtol(str + 16, NULL, 0); - if ((strncmp(str, "idle-threshold=", 15) == 0) || - (strncmp(str, "idle_threshold=", 15) == 0)) - idle_threshold = simple_strtol(str + 15, NULL, 0); - if ((strncmp(str, "idle-period=", 12) == 0) || - (strncmp(str, "idle_period=", 12) == 0)) - idle_period = simple_strtol(str + 12, NULL, 0); - invert = (strncmp(str, "no-", 3) == 0) || - (strncmp(str, "no_", 3) == 0); - if (invert) - str += 3; - if (strncmp(str, "debug", 5) == 0) - debug = !invert; - if ((strncmp(str, "power-off", 9) == 0) || - (strncmp(str, "power_off", 9) == 0)) - power_off = !invert; - if (strncmp(str, "smp", 3) == 0) - { - smp = !invert; - idle_threshold = 100; - } - if ((strncmp(str, "allow-ints", 10) == 0) || - (strncmp(str, "allow_ints", 10) == 0)) - apm_info.allow_ints = !invert; - if ((strncmp(str, "broken-psr", 10) == 0) || - (strncmp(str, "broken_psr", 10) == 0)) - apm_info.get_power_status_broken = !invert; - if ((strncmp(str, "realmode-power-off", 18) == 0) || - (strncmp(str, "realmode_power_off", 18) == 0)) - apm_info.realmode_power_off = !invert; - str = strchr(str, ','); - if (str != NULL) - str += strspn(str, ", \t"); - } - return 1; -} - -__setup("apm=", apm_setup); -#endif - -static const struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = do_read, - .poll = do_poll, - .ioctl = do_ioctl, - .open = do_open, - .release = do_release, -}; - -static struct miscdevice apm_device = { - APM_MINOR_DEV, - "apm_bios", - &apm_bios_fops -}; - - -/* Simple "print if true" callback */ -static int __init print_if_true(struct dmi_system_id *d) -{ - printk("%s\n", d->ident); - return 0; -} - -/* - * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was - * disabled before the suspend. Linux used to get terribly confused by that. - */ -static int __init broken_ps2_resume(struct dmi_system_id *d) -{ - printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident); - return 0; -} - -/* Some bioses have a broken protected mode poweroff and need to use realmode */ -static int __init set_realmode_power_off(struct dmi_system_id *d) -{ - if (apm_info.realmode_power_off == 0) { - apm_info.realmode_power_off = 1; - printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident); - } - return 0; -} - -/* Some laptops require interrupts to be enabled during APM calls */ -static int __init set_apm_ints(struct dmi_system_id *d) -{ - if (apm_info.allow_ints == 0) { - apm_info.allow_ints = 1; - printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident); - } - return 0; -} - -/* Some APM bioses corrupt memory or just plain do not work */ -static int __init apm_is_horked(struct dmi_system_id *d) -{ - if (apm_info.disabled == 0) { - apm_info.disabled = 1; - printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); - } - return 0; -} - -static int __init apm_is_horked_d850md(struct dmi_system_id *d) -{ - if (apm_info.disabled == 0) { - apm_info.disabled = 1; - printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); - printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n"); - printk(KERN_INFO "download from support.intel.com \n"); - } - return 0; -} - -/* Some APM bioses hang on APM idle calls */ -static int __init apm_likes_to_melt(struct dmi_system_id *d) -{ - if (apm_info.forbid_idle == 0) { - apm_info.forbid_idle = 1; - printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident); - } - return 0; -} - -/* - * Check for clue free BIOS implementations who use - * the following QA technique - * - * [ Write BIOS Code ]<------ - * | ^ - * < Does it Compile >----N-- - * |Y ^ - * < Does it Boot Win98 >-N-- - * |Y - * [Ship It] - * - * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e) - * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000) - */ -static int __init broken_apm_power(struct dmi_system_id *d) -{ - apm_info.get_power_status_broken = 1; - printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n"); - return 0; -} - -/* - * This bios swaps the APM minute reporting bytes over (Many sony laptops - * have this problem). - */ -static int __init swab_apm_power_in_minutes(struct dmi_system_id *d) -{ - apm_info.get_power_status_swabinminutes = 1; - printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n"); - return 0; -} - -static struct dmi_system_id __initdata apm_dmi_table[] = { - { - print_if_true, - KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.", - { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), - DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), }, - }, - { /* Handle problems with APM on the C600 */ - broken_ps2_resume, "Dell Latitude C600", - { DMI_MATCH(DMI_SYS_VENDOR, "Dell"), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), }, - }, - { /* Allow interrupts during suspend on Dell Latitude laptops*/ - set_apm_ints, "Dell Latitude", - { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), } - }, - { /* APM crashes */ - apm_is_horked, "Dell Inspiron 2500", - { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), - DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, - }, - { /* Allow interrupts during suspend on Dell Inspiron laptops*/ - set_apm_ints, "Dell Inspiron", { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), }, - }, - { /* Handle problems with APM on Inspiron 5000e */ - broken_apm_power, "Dell Inspiron 5000e", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "A04"), - DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), }, - }, - { /* Handle problems with APM on Inspiron 2500 */ - broken_apm_power, "Dell Inspiron 2500", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "A12"), - DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), }, - }, - { /* APM crashes */ - apm_is_horked, "Dell Dimension 4100", - { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), - DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."), - DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, - }, - { /* Allow interrupts during suspend on Compaq Laptops*/ - set_apm_ints, "Compaq 12XL125", - { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"), - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION,"4.06"), }, - }, - { /* Allow interrupts during APM or the clock goes slow */ - set_apm_ints, "ASUSTeK", - { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), }, - }, - { /* APM blows on shutdown */ - apm_is_horked, "ABIT KX7-333[R]", - { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"), - DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), }, - }, - { /* APM crashes */ - apm_is_horked, "Trigem Delhi3", - { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"), - DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), }, - }, - { /* APM crashes */ - apm_is_horked, "Fujitsu-Siemens", - { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"), - DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), }, - }, - { /* APM crashes */ - apm_is_horked_d850md, "Intel D850MD", - { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), - DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), }, - }, - { /* APM crashes */ - apm_is_horked, "Intel D810EMO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), - DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), }, - }, - { /* APM crashes */ - apm_is_horked, "Dell XPS-Z", - { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), - DMI_MATCH(DMI_BIOS_VERSION, "A11"), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), }, - }, - { /* APM crashes */ - apm_is_horked, "Sharp PC-PJ/AX", - { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), - DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"), - DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"), - DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), }, - }, - { /* APM crashes */ - apm_is_horked, "Dell Inspiron 2500", - { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), - DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, - }, - { /* APM idle hangs */ - apm_likes_to_melt, "Jabil AMD", - { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), - DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), }, - }, - { /* APM idle hangs */ - apm_likes_to_melt, "AMI Bios", - { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), - DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0206H"), - DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-N505VX */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"), - DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-XG29 */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"), - DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"), - DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"), - DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"), - DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"), - DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"), - DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"), - DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-F104K */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"), - DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), }, - }, - - { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"), - DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-C1VE */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"), - DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), }, - }, - { /* Handle problems with APM on Sony Vaio PCG-C1VE */ - swab_apm_power_in_minutes, "Sony VAIO", - { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"), - DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), }, - }, - { /* broken PM poweroff bios */ - set_realmode_power_off, "Award Software v4.60 PGMA", - { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), - DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"), - DMI_MATCH(DMI_BIOS_DATE, "134526184"), }, - }, - - /* Generic per vendor APM settings */ - - { /* Allow interrupts during suspend on IBM laptops */ - set_apm_ints, "IBM", - { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, - }, - - { } -}; - -/* - * Just start the APM thread. We do NOT want to do APM BIOS - * calls from anything but the APM thread, if for no other reason - * than the fact that we don't trust the APM BIOS. This way, - * most common APM BIOS problems that lead to protection errors - * etc will have at least some level of being contained... - * - * In short, if something bad happens, at least we have a choice - * of just killing the apm thread.. - */ -static int __init apm_init(void) -{ - struct proc_dir_entry *apm_proc; - struct desc_struct *gdt; - int err; - - dmi_check_system(apm_dmi_table); - - if (apm_info.bios.version == 0 || paravirt_enabled()) { - printk(KERN_INFO "apm: BIOS not found.\n"); - return -ENODEV; - } - printk(KERN_INFO - "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n", - ((apm_info.bios.version >> 8) & 0xff), - (apm_info.bios.version & 0xff), - apm_info.bios.flags, - driver_version); - if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) { - printk(KERN_INFO "apm: no 32 bit BIOS support\n"); - return -ENODEV; - } - - if (allow_ints) - apm_info.allow_ints = 1; - if (broken_psr) - apm_info.get_power_status_broken = 1; - if (realmode_power_off) - apm_info.realmode_power_off = 1; - /* User can override, but default is to trust DMI */ - if (apm_disabled != -1) - apm_info.disabled = apm_disabled; - - /* - * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1 - * but is reportedly a 1.0 BIOS. - */ - if (apm_info.bios.version == 0x001) - apm_info.bios.version = 0x100; - - /* BIOS < 1.2 doesn't set cseg_16_len */ - if (apm_info.bios.version < 0x102) - apm_info.bios.cseg_16_len = 0; /* 64k */ - - if (debug) { - printk(KERN_INFO "apm: entry %x:%x cseg16 %x dseg %x", - apm_info.bios.cseg, apm_info.bios.offset, - apm_info.bios.cseg_16, apm_info.bios.dseg); - if (apm_info.bios.version > 0x100) - printk(" cseg len %x, dseg len %x", - apm_info.bios.cseg_len, - apm_info.bios.dseg_len); - if (apm_info.bios.version > 0x101) - printk(" cseg16 len %x", apm_info.bios.cseg_16_len); - printk("\n"); - } - - if (apm_info.disabled) { - printk(KERN_NOTICE "apm: disabled on user request.\n"); - return -ENODEV; - } - if ((num_online_cpus() > 1) && !power_off && !smp) { - printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n"); - apm_info.disabled = 1; - return -ENODEV; - } - if (PM_IS_ACTIVE()) { - printk(KERN_NOTICE "apm: overridden by ACPI.\n"); - apm_info.disabled = 1; - return -ENODEV; - } -#ifdef CONFIG_PM_LEGACY - pm_active = 1; -#endif - - /* - * Set up a segment that references the real mode segment 0x40 - * that extends up to the end of page zero (that we have reserved). - * This is for buggy BIOS's that refer to (real mode) segment 0x40 - * even though they are called in protected mode. - */ - set_base(bad_bios_desc, __va((unsigned long)0x40 << 4)); - _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4)); - - /* - * Set up the long jump entry point to the APM BIOS, which is called - * from inline assembly. - */ - apm_bios_entry.offset = apm_info.bios.offset; - apm_bios_entry.segment = APM_CS; - - /* - * The APM 1.1 BIOS is supposed to provide limit information that it - * recognizes. Many machines do this correctly, but many others do - * not restrict themselves to their claimed limit. When this happens, - * they will cause a segmentation violation in the kernel at boot time. - * Most BIOS's, however, will respect a 64k limit, so we use that. - * - * Note we only set APM segments on CPU zero, since we pin the APM - * code to that CPU. - */ - gdt = get_cpu_gdt_table(0); - set_base(gdt[APM_CS >> 3], - __va((unsigned long)apm_info.bios.cseg << 4)); - set_base(gdt[APM_CS_16 >> 3], - __va((unsigned long)apm_info.bios.cseg_16 << 4)); - set_base(gdt[APM_DS >> 3], - __va((unsigned long)apm_info.bios.dseg << 4)); - - apm_proc = create_proc_entry("apm", 0, NULL); - if (apm_proc) - apm_proc->proc_fops = &apm_file_ops; - - kapmd_task = kthread_create(apm, NULL, "kapmd"); - if (IS_ERR(kapmd_task)) { - printk(KERN_ERR "apm: disabled - Unable to start kernel " - "thread.\n"); - err = PTR_ERR(kapmd_task); - kapmd_task = NULL; - remove_proc_entry("apm", NULL); - return err; - } - wake_up_process(kapmd_task); - - if (num_online_cpus() > 1 && !smp ) { - printk(KERN_NOTICE - "apm: disabled - APM is not SMP safe (power off active).\n"); - return 0; - } - - /* - * Note we don't actually care if the misc_device cannot be registered. - * this driver can do its job without it, even if userspace can't - * control it. just log the error - */ - if (misc_register(&apm_device)) - printk(KERN_WARNING "apm: Could not register misc device.\n"); - - if (HZ != 100) - idle_period = (idle_period * HZ) / 100; - if (idle_threshold < 100) { - original_pm_idle = pm_idle; - pm_idle = apm_cpu_idle; - set_pm_idle = 1; - } - - return 0; -} - -static void __exit apm_exit(void) -{ - int error; - - if (set_pm_idle) { - pm_idle = original_pm_idle; - /* - * We are about to unload the current idle thread pm callback - * (pm_idle), Wait for all processors to update cached/local - * copies of pm_idle before proceeding. - */ - cpu_idle_wait(); - } - if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0) - && (apm_info.connection_version > 0x0100)) { - error = apm_engage_power_management(APM_DEVICE_ALL, 0); - if (error) - apm_error("disengage power management", error); - } - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); - if (power_off) - pm_power_off = NULL; - if (kapmd_task) { - kthread_stop(kapmd_task); - kapmd_task = NULL; - } -#ifdef CONFIG_PM_LEGACY - pm_active = 0; -#endif -} - -module_init(apm_init); -module_exit(apm_exit); - -MODULE_AUTHOR("Stephen Rothwell"); -MODULE_DESCRIPTION("Advanced Power Management"); -MODULE_LICENSE("GPL"); -module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Enable debug mode"); -module_param(power_off, bool, 0444); -MODULE_PARM_DESC(power_off, "Enable power off"); -module_param(bounce_interval, int, 0444); -MODULE_PARM_DESC(bounce_interval, - "Set the number of ticks to ignore suspend bounces"); -module_param(allow_ints, bool, 0444); -MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls"); -module_param(broken_psr, bool, 0444); -MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call"); -module_param(realmode_power_off, bool, 0444); -MODULE_PARM_DESC(realmode_power_off, - "Switch to real mode before powering off"); -module_param(idle_threshold, int, 0444); -MODULE_PARM_DESC(idle_threshold, - "System idle percentage above which to make APM BIOS idle calls"); -module_param(idle_period, int, 0444); -MODULE_PARM_DESC(idle_period, - "Period (in sec/100) over which to caculate the idle percentage"); -module_param(smp, bool, 0444); -MODULE_PARM_DESC(smp, - "Set this to enable APM use on an SMP platform. Use with caution on older systems"); -MODULE_ALIAS_MISCDEV(APM_MINOR_DEV); diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c deleted file mode 100644 index cfa82c8..0000000 --- a/arch/i386/kernel/asm-offsets.c +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_X86_32 -# include "asm-offsets_32.c" -#else -# include "asm-offsets_64.c" -#endif diff --git a/arch/i386/kernel/asm-offsets_32.c b/arch/i386/kernel/asm-offsets_32.c deleted file mode 100644 index 8029742..0000000 --- a/arch/i386/kernel/asm-offsets_32.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed - * to extract and format the required data. - */ - -#include -#include -#include -#include -#include -#include -#include "sigframe_32.h" -#include -#include -#include -#include -#include - -#include - -#ifdef CONFIG_LGUEST_GUEST -#include -#include "../../../drivers/lguest/lg.h" -#endif - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -#define OFFSET(sym, str, mem) \ - DEFINE(sym, offsetof(struct str, mem)); - -/* workaround for a warning with -Wmissing-prototypes */ -void foo(void); - -void foo(void) -{ - OFFSET(SIGCONTEXT_eax, sigcontext, eax); - OFFSET(SIGCONTEXT_ebx, sigcontext, ebx); - OFFSET(SIGCONTEXT_ecx, sigcontext, ecx); - OFFSET(SIGCONTEXT_edx, sigcontext, edx); - OFFSET(SIGCONTEXT_esi, sigcontext, esi); - OFFSET(SIGCONTEXT_edi, sigcontext, edi); - OFFSET(SIGCONTEXT_ebp, sigcontext, ebp); - OFFSET(SIGCONTEXT_esp, sigcontext, esp); - OFFSET(SIGCONTEXT_eip, sigcontext, eip); - BLANK(); - - OFFSET(CPUINFO_x86, cpuinfo_x86, x86); - OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor); - OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model); - OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask); - OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math); - OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level); - OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability); - OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id); - BLANK(); - - OFFSET(TI_task, thread_info, task); - OFFSET(TI_exec_domain, thread_info, exec_domain); - OFFSET(TI_flags, thread_info, flags); - OFFSET(TI_status, thread_info, status); - OFFSET(TI_preempt_count, thread_info, preempt_count); - OFFSET(TI_addr_limit, thread_info, addr_limit); - OFFSET(TI_restart_block, thread_info, restart_block); - OFFSET(TI_sysenter_return, thread_info, sysenter_return); - OFFSET(TI_cpu, thread_info, cpu); - BLANK(); - - OFFSET(GDS_size, Xgt_desc_struct, size); - OFFSET(GDS_address, Xgt_desc_struct, address); - OFFSET(GDS_pad, Xgt_desc_struct, pad); - BLANK(); - - OFFSET(PT_EBX, pt_regs, ebx); - OFFSET(PT_ECX, pt_regs, ecx); - OFFSET(PT_EDX, pt_regs, edx); - OFFSET(PT_ESI, pt_regs, esi); - OFFSET(PT_EDI, pt_regs, edi); - OFFSET(PT_EBP, pt_regs, ebp); - OFFSET(PT_EAX, pt_regs, eax); - OFFSET(PT_DS, pt_regs, xds); - OFFSET(PT_ES, pt_regs, xes); - OFFSET(PT_FS, pt_regs, xfs); - OFFSET(PT_ORIG_EAX, pt_regs, orig_eax); - OFFSET(PT_EIP, pt_regs, eip); - OFFSET(PT_CS, pt_regs, xcs); - OFFSET(PT_EFLAGS, pt_regs, eflags); - OFFSET(PT_OLDESP, pt_regs, esp); - OFFSET(PT_OLDSS, pt_regs, xss); - BLANK(); - - OFFSET(EXEC_DOMAIN_handler, exec_domain, handler); - OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext); - BLANK(); - - OFFSET(pbe_address, pbe, address); - OFFSET(pbe_orig_address, pbe, orig_address); - OFFSET(pbe_next, pbe, next); - - /* Offset from the sysenter stack to tss.esp0 */ - DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, x86_tss.esp0) - - sizeof(struct tss_struct)); - - DEFINE(PAGE_SIZE_asm, PAGE_SIZE); - DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT); - DEFINE(PTRS_PER_PTE, PTRS_PER_PTE); - DEFINE(PTRS_PER_PMD, PTRS_PER_PMD); - DEFINE(PTRS_PER_PGD, PTRS_PER_PGD); - - DEFINE(VDSO_PRELINK_asm, VDSO_PRELINK); - - OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx); - -#ifdef CONFIG_PARAVIRT - BLANK(); - OFFSET(PARAVIRT_enabled, paravirt_ops, paravirt_enabled); - OFFSET(PARAVIRT_irq_disable, paravirt_ops, irq_disable); - OFFSET(PARAVIRT_irq_enable, paravirt_ops, irq_enable); - OFFSET(PARAVIRT_irq_enable_sysexit, paravirt_ops, irq_enable_sysexit); - OFFSET(PARAVIRT_iret, paravirt_ops, iret); - OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0); -#endif - -#ifdef CONFIG_XEN - BLANK(); - OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); - OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); -#endif - -#ifdef CONFIG_LGUEST_GUEST - BLANK(); - OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled); - OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc); - OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc); - OFFSET(LGUEST_PAGES_host_cr3, lguest_pages, state.host_cr3); - OFFSET(LGUEST_PAGES_host_sp, lguest_pages, state.host_sp); - OFFSET(LGUEST_PAGES_guest_gdt_desc, lguest_pages,state.guest_gdt_desc); - OFFSET(LGUEST_PAGES_guest_idt_desc, lguest_pages,state.guest_idt_desc); - OFFSET(LGUEST_PAGES_guest_gdt, lguest_pages, state.guest_gdt); - OFFSET(LGUEST_PAGES_regs_trapnum, lguest_pages, regs.trapnum); - OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode); - OFFSET(LGUEST_PAGES_regs, lguest_pages, regs); -#endif -} diff --git a/arch/i386/kernel/bootflag.c b/arch/i386/kernel/bootflag.c deleted file mode 100644 index 0b98605..0000000 --- a/arch/i386/kernel/bootflag.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Implement 'Simple Boot Flag Specification 2.0' - */ - - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - -#define SBF_RESERVED (0x78) -#define SBF_PNPOS (1<<0) -#define SBF_BOOTING (1<<1) -#define SBF_DIAG (1<<2) -#define SBF_PARITY (1<<7) - - -int sbf_port __initdata = -1; /* set via acpi_boot_init() */ - - -static int __init parity(u8 v) -{ - int x = 0; - int i; - - for(i=0;i<8;i++) - { - x^=(v&1); - v>>=1; - } - return x; -} - -static void __init sbf_write(u8 v) -{ - unsigned long flags; - if(sbf_port != -1) - { - v &= ~SBF_PARITY; - if(!parity(v)) - v|=SBF_PARITY; - - printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", sbf_port, v); - - spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(v, sbf_port); - spin_unlock_irqrestore(&rtc_lock, flags); - } -} - -static u8 __init sbf_read(void) -{ - u8 v; - unsigned long flags; - if(sbf_port == -1) - return 0; - spin_lock_irqsave(&rtc_lock, flags); - v = CMOS_READ(sbf_port); - spin_unlock_irqrestore(&rtc_lock, flags); - return v; -} - -static int __init sbf_value_valid(u8 v) -{ - if(v&SBF_RESERVED) /* Reserved bits */ - return 0; - if(!parity(v)) - return 0; - return 1; -} - -static int __init sbf_init(void) -{ - u8 v; - if(sbf_port == -1) - return 0; - v = sbf_read(); - if(!sbf_value_valid(v)) - printk(KERN_WARNING "Simple Boot Flag value 0x%x read from CMOS RAM was invalid\n",v); - - v &= ~SBF_RESERVED; - v &= ~SBF_BOOTING; - v &= ~SBF_DIAG; -#if defined(CONFIG_ISAPNP) - v |= SBF_PNPOS; -#endif - sbf_write(v); - return 0; -} - -module_init(sbf_init); diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c deleted file mode 100644 index 5c2faa1..0000000 --- a/arch/i386/kernel/cpuid.c +++ /dev/null @@ -1,242 +0,0 @@ -/* ----------------------------------------------------------------------- * - * - * Copyright 2000 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, - * USA; either version 2 of the License, or (at your option) any later - * version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * cpuid.c - * - * x86 CPUID access device - * - * This device is accessed by lseek() to the appropriate CPUID level - * and then read in chunks of 16 bytes. A larger size means multiple - * reads of consecutive levels. - * - * This driver uses /dev/cpu/%d/cpuid where %d is the minor number, and on - * an SMP box will direct the access to CPU %d. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct class *cpuid_class; - -#ifdef CONFIG_SMP - -struct cpuid_command { - u32 reg; - u32 *data; -}; - -static void cpuid_smp_cpuid(void *cmd_block) -{ - struct cpuid_command *cmd = (struct cpuid_command *)cmd_block; - - cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], - &cmd->data[3]); -} - -static inline void do_cpuid(int cpu, u32 reg, u32 * data) -{ - struct cpuid_command cmd; - - preempt_disable(); - if (cpu == smp_processor_id()) { - cpuid(reg, &data[0], &data[1], &data[2], &data[3]); - } else { - cmd.reg = reg; - cmd.data = data; - - smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); - } - preempt_enable(); -} -#else /* ! CONFIG_SMP */ - -static inline void do_cpuid(int cpu, u32 reg, u32 * data) -{ - cpuid(reg, &data[0], &data[1], &data[2], &data[3]); -} - -#endif /* ! CONFIG_SMP */ - -static loff_t cpuid_seek(struct file *file, loff_t offset, int orig) -{ - loff_t ret; - - lock_kernel(); - - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - break; - default: - ret = -EINVAL; - } - - unlock_kernel(); - return ret; -} - -static ssize_t cpuid_read(struct file *file, char __user *buf, - size_t count, loff_t * ppos) -{ - char __user *tmp = buf; - u32 data[4]; - u32 reg = *ppos; - int cpu = iminor(file->f_path.dentry->d_inode); - - if (count % 16) - return -EINVAL; /* Invalid chunk size */ - - for (; count; count -= 16) { - do_cpuid(cpu, reg, data); - if (copy_to_user(tmp, &data, 16)) - return -EFAULT; - tmp += 16; - *ppos = reg++; - } - - return tmp - buf; -} - -static int cpuid_open(struct inode *inode, struct file *file) -{ - unsigned int cpu = iminor(file->f_path.dentry->d_inode); - struct cpuinfo_x86 *c = &(cpu_data)[cpu]; - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (c->cpuid_level < 0) - return -EIO; /* CPUID not supported */ - - return 0; -} - -/* - * File operations we support - */ -static const struct file_operations cpuid_fops = { - .owner = THIS_MODULE, - .llseek = cpuid_seek, - .read = cpuid_read, - .open = cpuid_open, -}; - -static int cpuid_device_create(int i) -{ - int err = 0; - struct device *dev; - - dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), "cpu%d",i); - if (IS_ERR(dev)) - err = PTR_ERR(dev); - return err; -} - -static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - cpuid_device_create(cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata cpuid_class_cpu_notifier = -{ - .notifier_call = cpuid_class_cpu_callback, -}; - -static int __init cpuid_init(void) -{ - int i, err = 0; - i = 0; - - if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) { - printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n", - CPUID_MAJOR); - err = -EBUSY; - goto out; - } - cpuid_class = class_create(THIS_MODULE, "cpuid"); - if (IS_ERR(cpuid_class)) { - err = PTR_ERR(cpuid_class); - goto out_chrdev; - } - for_each_online_cpu(i) { - err = cpuid_device_create(i); - if (err != 0) - goto out_class; - } - register_hotcpu_notifier(&cpuid_class_cpu_notifier); - - err = 0; - goto out; - -out_class: - i = 0; - for_each_online_cpu(i) { - device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, i)); - } - class_destroy(cpuid_class); -out_chrdev: - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); -out: - return err; -} - -static void __exit cpuid_exit(void) -{ - int cpu = 0; - - for_each_online_cpu(cpu) - device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); - class_destroy(cpuid_class); - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); - unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); -} - -module_init(cpuid_init); -module_exit(cpuid_exit); - -MODULE_AUTHOR("H. Peter Anvin "); -MODULE_DESCRIPTION("x86 generic CPUID driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/i386/kernel/crash_32.c b/arch/i386/kernel/crash_32.c deleted file mode 100644 index 53589d1..0000000 --- a/arch/i386/kernel/crash_32.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Architecture specific (i386) functions for kexec based crash dumps. - * - * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) - * - * Copyright (C) IBM Corporation, 2004. All rights reserved. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include - - -/* This keeps a track of which one is crashing cpu. */ -static int crashing_cpu; - -#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC) -static atomic_t waiting_for_crash_ipi; - -static int crash_nmi_callback(struct notifier_block *self, - unsigned long val, void *data) -{ - struct pt_regs *regs; - struct pt_regs fixed_regs; - int cpu; - - if (val != DIE_NMI_IPI) - return NOTIFY_OK; - - regs = ((struct die_args *)data)->regs; - cpu = raw_smp_processor_id(); - - /* Don't do anything if this handler is invoked on crashing cpu. - * Otherwise, system will completely hang. Crashing cpu can get - * an NMI if system was initially booted with nmi_watchdog parameter. - */ - if (cpu == crashing_cpu) - return NOTIFY_STOP; - local_irq_disable(); - - if (!user_mode_vm(regs)) { - crash_fixup_ss_esp(&fixed_regs, regs); - regs = &fixed_regs; - } - crash_save_cpu(regs, cpu); - disable_local_APIC(); - atomic_dec(&waiting_for_crash_ipi); - /* Assume hlt works */ - halt(); - for (;;) - cpu_relax(); - - return 1; -} - -static void smp_send_nmi_allbutself(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(safe_smp_processor_id(), mask); - if (!cpus_empty(mask)) - send_IPI_mask(mask, NMI_VECTOR); -} - -static struct notifier_block crash_nmi_nb = { - .notifier_call = crash_nmi_callback, -}; - -static void nmi_shootdown_cpus(void) -{ - unsigned long msecs; - - atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); - /* Would it be better to replace the trap vector here? */ - if (register_die_notifier(&crash_nmi_nb)) - return; /* return what? */ - /* Ensure the new callback function is set before sending - * out the NMI - */ - wmb(); - - smp_send_nmi_allbutself(); - - msecs = 1000; /* Wait at most a second for the other cpus to stop */ - while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { - mdelay(1); - msecs--; - } - - /* Leave the nmi callback set */ - disable_local_APIC(); -} -#else -static void nmi_shootdown_cpus(void) -{ - /* There are no cpus to shootdown */ -} -#endif - -void machine_crash_shutdown(struct pt_regs *regs) -{ - /* This function is only called after the system - * has panicked or is otherwise in a critical state. - * The minimum amount of code to allow a kexec'd kernel - * to run successfully needs to happen here. - * - * In practice this means shooting down the other cpus in - * an SMP system. - */ - /* The kernel is broken so disable interrupts */ - local_irq_disable(); - - /* Make a note of crashing cpu. Will be used in NMI callback.*/ - crashing_cpu = safe_smp_processor_id(); - nmi_shootdown_cpus(); - lapic_shutdown(); -#if defined(CONFIG_X86_IO_APIC) - disable_IO_APIC(); -#endif - crash_save_cpu(regs, safe_smp_processor_id()); -} diff --git a/arch/i386/kernel/crash_dump_32.c b/arch/i386/kernel/crash_dump_32.c deleted file mode 100644 index 3f532df..0000000 --- a/arch/i386/kernel/crash_dump_32.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * kernel/crash_dump.c - Memory preserving reboot related code. - * - * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) - * Copyright (C) IBM Corporation, 2004. All rights reserved - */ - -#include -#include -#include - -#include - -static void *kdump_buf_page; - -/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. We stitch up a pte, similar to kmap_atomic. - * - * Calling copy_to_user() in atomic context is not desirable. Hence first - * copying the data to a pre-allocated kernel page and then copying to user - * space in non-atomic context. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) -{ - void *vaddr; - - if (!csize) - return 0; - - vaddr = kmap_atomic_pfn(pfn, KM_PTE0); - - if (!userbuf) { - memcpy(buf, (vaddr + offset), csize); - kunmap_atomic(vaddr, KM_PTE0); - } else { - if (!kdump_buf_page) { - printk(KERN_WARNING "Kdump: Kdump buffer page not" - " allocated\n"); - return -EFAULT; - } - copy_page(kdump_buf_page, vaddr); - kunmap_atomic(vaddr, KM_PTE0); - if (copy_to_user(buf, (kdump_buf_page + offset), csize)) - return -EFAULT; - } - - return csize; -} - -static int __init kdump_buf_page_init(void) -{ - int ret = 0; - - kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!kdump_buf_page) { - printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer" - " page\n"); - ret = -ENOMEM; - } - - return ret; -} -arch_initcall(kdump_buf_page_init); diff --git a/arch/i386/kernel/doublefault_32.c b/arch/i386/kernel/doublefault_32.c deleted file mode 100644 index 40978af..0000000 --- a/arch/i386/kernel/doublefault_32.c +++ /dev/null @@ -1,70 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DOUBLEFAULT_STACKSIZE (1024) -static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE]; -#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE) - -#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM) - -static void doublefault_fn(void) -{ - struct Xgt_desc_struct gdt_desc = {0, 0}; - unsigned long gdt, tss; - - store_gdt(&gdt_desc); - gdt = gdt_desc.address; - - printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); - - if (ptr_ok(gdt)) { - gdt += GDT_ENTRY_TSS << 3; - tss = *(u16 *)(gdt+2); - tss += *(u8 *)(gdt+4) << 16; - tss += *(u8 *)(gdt+7) << 24; - printk(KERN_EMERG "double fault, tss at %08lx\n", tss); - - if (ptr_ok(tss)) { - struct i386_hw_tss *t = (struct i386_hw_tss *)tss; - - printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", t->eip, t->esp); - - printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", - t->eax, t->ebx, t->ecx, t->edx); - printk(KERN_EMERG "esi = %08lx, edi = %08lx\n", - t->esi, t->edi); - } - } - - for (;;) - cpu_relax(); -} - -struct tss_struct doublefault_tss __cacheline_aligned = { - .x86_tss = { - .esp0 = STACK_START, - .ss0 = __KERNEL_DS, - .ldt = 0, - .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, - - .eip = (unsigned long) doublefault_fn, - /* 0x2 bit is always set */ - .eflags = X86_EFLAGS_SF | 0x2, - .esp = STACK_START, - .es = __USER_DS, - .cs = __KERNEL_CS, - .ss = __KERNEL_DS, - .ds = __USER_DS, - .fs = __KERNEL_PERCPU, - - .__cr3 = __pa(swapper_pg_dir) - } -}; diff --git a/arch/i386/kernel/e820_32.c b/arch/i386/kernel/e820_32.c deleted file mode 100644 index 3c86b97..0000000 --- a/arch/i386/kernel/e820_32.c +++ /dev/null @@ -1,944 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_EFI -int efi_enabled = 0; -EXPORT_SYMBOL(efi_enabled); -#endif - -struct e820map e820; -struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ -}; -static struct change_member change_point_list[2*E820MAX] __initdata; -static struct change_member *change_point[2*E820MAX] __initdata; -static struct e820entry *overlap_list[E820MAX] __initdata; -static struct e820entry new_bios[E820MAX] __initdata; -/* For PCI or other memory-mapped resources */ -unsigned long pci_mem_start = 0x10000000; -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif -extern int user_defined_memmap; -struct resource data_resource = { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -struct resource code_resource = { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource adapter_rom_resources[] = { { - .name = "Adapter ROM", - .start = 0xc8000, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -} }; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - -static struct resource standard_io_resources[] = { { - .name = "dma1", - .start = 0x0000, - .end = 0x001f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "pic1", - .start = 0x0020, - .end = 0x0021, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "timer0", - .start = 0x0040, - .end = 0x0043, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "timer1", - .start = 0x0050, - .end = 0x0053, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "keyboard", - .start = 0x0060, - .end = 0x006f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "dma page reg", - .start = 0x0080, - .end = 0x008f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "pic2", - .start = 0x00a0, - .end = 0x00a1, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "dma2", - .start = 0x00c0, - .end = 0x00df, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -}, { - .name = "fpu", - .start = 0x00f0, - .end = 0x00ff, - .flags = IORESOURCE_BUSY | IORESOURCE_IO -} }; - -#define ROMSIGNATURE 0xaa55 - -static int __init romsignature(const unsigned char *rom) -{ - const unsigned short * const ptr = (const unsigned short *)rom; - unsigned short sig; - - return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; -} - -static int __init romchecksum(const unsigned char *rom, unsigned long length) -{ - unsigned char sum, c; - - for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) - sum += c; - return !length && !sum; -} - -static void __init probe_roms(void) -{ - const unsigned char *rom; - unsigned long start, length, upper; - unsigned char c; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - -/* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ -static void __init -legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource) -{ - int i; - - probe_roms(); - for (i = 0; i < e820.nr_map; i++) { - struct resource *res; -#ifndef CONFIG_RESOURCES_64BIT - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; -#endif - res = kzalloc(sizeof(struct resource), GFP_ATOMIC); - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, res)) { - kfree(res); - continue; - } - if (e820.map[i].type == E820_RAM) { - /* - * We don't know which RAM region contains kernel data, - * so we try it repeatedly and let the resource manager - * test it. - */ - request_resource(res, code_resource); - request_resource(res, data_resource); -#ifdef CONFIG_KEXEC - request_resource(res, &crashk_res); -#endif - } - } -} - -/* - * Request address space for all standard resources - * - * This is called just before pcibios_init(), which is also a - * subsys_initcall, but is linked in later (in arch/i386/pci/common.c). - */ -static int __init request_standard_resources(void) -{ - int i; - - printk("Setting up standard PCI resources\n"); - if (efi_enabled) - efi_initialize_iomem_resources(&code_resource, &data_resource); - else - legacy_init_iomem_resources(&code_resource, &data_resource); - - /* EFI systems may still have VGA */ - request_resource(&iomem_resource, &video_ram_resource); - - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, &standard_io_resources[i]); - return 0; -} - -subsys_initcall(request_standard_resources); - -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -/** - * e820_mark_nosave_regions - Find the ranges of physical addresses that do not - * correspond to e820 RAM areas and mark the corresponding pages as nosave for - * hibernation. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long pfn; - - pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (pfn < PFN_UP(ei->addr)) - register_nosave_region(pfn, PFN_UP(ei->addr)); - - pfn = PFN_DOWN(ei->addr + ei->size); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), pfn); - - if (pfn >= max_low_pfn) - break; - } -} -#endif - -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type) -{ - int x; - - if (!efi_enabled) { - x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; - } -} /* add_memory_region */ - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) { - return -1; - } - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; iaddr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; /* true number of change-points */ - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if > , swap */ - /* or, if current= & last=, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; ipbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; itype > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) - */ -int __init copy_e820_map(struct e820entry * biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - unsigned long long start = biosmap->addr; - unsigned long long size = biosmap->size; - unsigned long long end = start + size; - unsigned long type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - /* - * Some BIOSes claim RAM in the 640k - 1M region. - * Not right. Fix it up. - */ - if (type == E820_RAM) { - if (start < 0x100000ULL && end > 0xA0000ULL) { - if (start < 0xA0000ULL) - add_memory_region(start, 0xA0000ULL-start, type); - if (end <= 0x100000ULL) - continue; - start = 0x100000ULL; - size = end - start; - } - } - add_memory_region(start, size, type); - } while (biosmap++,--nr_map); - return 0; -} - -/* - * Callback for efi_memory_walk. - */ -static int __init -efi_find_max_pfn(unsigned long start, unsigned long end, void *arg) -{ - unsigned long *max_pfn = arg, pfn; - - if (start < end) { - pfn = PFN_UP(end -1); - if (pfn > *max_pfn) - *max_pfn = pfn; - } - return 0; -} - -static int __init -efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg) -{ - memory_present(0, PFN_UP(start), PFN_DOWN(end)); - return 0; -} - -/* - * Find the highest page frame number we have available - */ -void __init find_max_pfn(void) -{ - int i; - - max_pfn = 0; - if (efi_enabled) { - efi_memmap_walk(efi_find_max_pfn, &max_pfn); - efi_memmap_walk(efi_memory_present_wrapper, NULL); - return; - } - - for (i = 0; i < e820.nr_map; i++) { - unsigned long start, end; - /* RAM? */ - if (e820.map[i].type != E820_RAM) - continue; - start = PFN_UP(e820.map[i].addr); - end = PFN_DOWN(e820.map[i].addr + e820.map[i].size); - if (start >= end) - continue; - if (end > max_pfn) - max_pfn = end; - memory_present(0, start, end); - } -} - -/* - * Free all available memory for boot time allocation. Used - * as a callback function by efi_memory_walk() - */ - -static int __init -free_available_memory(unsigned long start, unsigned long end, void *arg) -{ - /* check max_low_pfn */ - if (start >= (max_low_pfn << PAGE_SHIFT)) - return 0; - if (end >= (max_low_pfn << PAGE_SHIFT)) - end = max_low_pfn << PAGE_SHIFT; - if (start < end) - free_bootmem(start, end - start); - - return 0; -} -/* - * Register fully available low RAM pages with the bootmem allocator. - */ -void __init register_bootmem_low_pages(unsigned long max_low_pfn) -{ - int i; - - if (efi_enabled) { - efi_memmap_walk(free_available_memory, NULL); - return; - } - for (i = 0; i < e820.nr_map; i++) { - unsigned long curr_pfn, last_pfn, size; - /* - * Reserve usable low memory - */ - if (e820.map[i].type != E820_RAM) - continue; - /* - * We are rounding up the start address of usable memory: - */ - curr_pfn = PFN_UP(e820.map[i].addr); - if (curr_pfn >= max_low_pfn) - continue; - /* - * ... and at the end of the usable range downwards: - */ - last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size); - - if (last_pfn > max_low_pfn) - last_pfn = max_low_pfn; - - /* - * .. finally, did all the rounding and playing - * around just make the area go away? - */ - if (last_pfn <= curr_pfn) - continue; - - size = last_pfn - curr_pfn; - free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); - } -} - -void __init e820_register_memory(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; - - /* - * Search for the bigest gap in the low 32 bits of the e820 - * memory space. - */ - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - } - } - if (start < last) - last = start; - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", - pci_mem_start, gapstart, gapsize); -} - -void __init print_memory_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(" %s: %016Lx - %016Lx ", who, - e820.map[i].addr, - e820.map[i].addr + e820.map[i].size); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - -static __init __always_inline void efi_limit_regions(unsigned long long size) -{ - unsigned long long current_addr = 0; - efi_memory_desc_t *md, *next_md; - void *p, *p1; - int i, j; - - j = 0; - p1 = memmap.map; - for (p = p1, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) { - md = p; - next_md = p1; - current_addr = md->phys_addr + - PFN_PHYS(md->num_pages); - if (is_available_memory(md)) { - if (md->phys_addr >= size) continue; - memcpy(next_md, md, memmap.desc_size); - if (current_addr >= size) { - next_md->num_pages -= - PFN_UP(current_addr-size); - } - p1 += memmap.desc_size; - next_md = p1; - j++; - } else if ((md->attribute & EFI_MEMORY_RUNTIME) == - EFI_MEMORY_RUNTIME) { - /* In order to make runtime services - * available we have to include runtime - * memory regions in memory map */ - memcpy(next_md, md, memmap.desc_size); - p1 += memmap.desc_size; - next_md = p1; - j++; - } - } - memmap.nr_map = j; - memmap.map_end = memmap.map + - (memmap.nr_map * memmap.desc_size); -} - -void __init limit_regions(unsigned long long size) -{ - unsigned long long current_addr; - int i; - - print_memory_map("limit_regions start"); - if (efi_enabled) { - efi_limit_regions(size); - return; - } - for (i = 0; i < e820.nr_map; i++) { - current_addr = e820.map[i].addr + e820.map[i].size; - if (current_addr < size) - continue; - - if (e820.map[i].type != E820_RAM) - continue; - - if (e820.map[i].addr >= size) { - /* - * This region starts past the end of the - * requested size, skip it completely. - */ - e820.nr_map = i; - } else { - e820.nr_map = i + 1; - e820.map[i].size -= current_addr - size; - } - print_memory_map("limit_regions endfor"); - return; - } - print_memory_map("limit_regions endfunc"); -} - -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(u64 start, u64 end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - const struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - - /* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init -e820_all_mapped(unsigned long s, unsigned long e, unsigned type) -{ - u64 start = s; - u64 end = e; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full - * coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; -} - -static int __init parse_memmap(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "exactmap") == 0) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - find_max_pfn(); - saved_max_pfn = max_pfn; -#endif - e820.nr_map = 0; - user_defined_memmap = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long start_at, mem_size; - - mem_size = memparse(arg, &arg); - if (*arg == '@') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*arg == '#') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*arg == '$') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - limit_regions(mem_size); - user_defined_memmap = 1; - } - } - return 0; -} -early_param("memmap", parse_memmap); diff --git a/arch/i386/kernel/early_printk.c b/arch/i386/kernel/early_printk.c deleted file mode 100644 index 92f812b..0000000 --- a/arch/i386/kernel/early_printk.c +++ /dev/null @@ -1,2 +0,0 @@ - -#include "../../x86_64/kernel/early_printk.c" diff --git a/arch/i386/kernel/efi_32.c b/arch/i386/kernel/efi_32.c deleted file mode 100644 index 2452c6f..0000000 --- a/arch/i386/kernel/efi_32.c +++ /dev/null @@ -1,712 +0,0 @@ -/* - * Extensible Firmware Interface - * - * Based on Extensible Firmware Interface Specification version 1.0 - * - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond - * Copyright (C) 1999-2002 Hewlett-Packard Co. - * David Mosberger-Tang - * Stephane Eranian - * - * All EFI Runtime Services are not implemented yet as EFI only - * supports physical mode addressing on SoftSDV. This is to be fixed - * in a future version. --drummond 1999-07-20 - * - * Implemented EFI runtime services and virtual mode calls. --davidm - * - * Goutham Rao: - * Skip non-WB memory and ignore empty memory ranges. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#define EFI_DEBUG 0 -#define PFX "EFI: " - -extern efi_status_t asmlinkage efi_call_phys(void *, ...); - -struct efi efi; -EXPORT_SYMBOL(efi); -static struct efi efi_phys; -struct efi_memory_map memmap; - -/* - * We require an early boot_ioremap mapping mechanism initially - */ -extern void * boot_ioremap(unsigned long, unsigned long); - -/* - * To make EFI call EFI runtime service in physical addressing mode we need - * prelog/epilog before/after the invocation to disable interrupt, to - * claim EFI runtime service handler exclusively and to duplicate a memory in - * low memory space say 0 - 3G. - */ - -static unsigned long efi_rt_eflags; -static DEFINE_SPINLOCK(efi_rt_lock); -static pgd_t efi_bak_pg_dir_pointer[2]; - -static void efi_call_phys_prelog(void) __acquires(efi_rt_lock) -{ - unsigned long cr4; - unsigned long temp; - struct Xgt_desc_struct gdt_descr; - - spin_lock(&efi_rt_lock); - local_irq_save(efi_rt_eflags); - - /* - * If I don't have PSE, I should just duplicate two entries in page - * directory. If I have PSE, I just need to duplicate one entry in - * page directory. - */ - cr4 = read_cr4(); - - if (cr4 & X86_CR4_PSE) { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - swapper_pg_dir[0].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - } else { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - efi_bak_pg_dir_pointer[1].pgd = - swapper_pg_dir[pgd_index(0x400000)].pgd; - swapper_pg_dir[pgd_index(0)].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - temp = PAGE_OFFSET + 0x400000; - swapper_pg_dir[pgd_index(0x400000)].pgd = - swapper_pg_dir[pgd_index(temp)].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ - local_flush_tlb(); - - gdt_descr.address = __pa(get_cpu_gdt_table(0)); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); -} - -static void efi_call_phys_epilog(void) __releases(efi_rt_lock) -{ - unsigned long cr4; - struct Xgt_desc_struct gdt_descr; - - gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); - - cr4 = read_cr4(); - - if (cr4 & X86_CR4_PSE) { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - } else { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - swapper_pg_dir[pgd_index(0x400000)].pgd = - efi_bak_pg_dir_pointer[1].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ - local_flush_tlb(); - - local_irq_restore(efi_rt_eflags); - spin_unlock(&efi_rt_lock); -} - -static efi_status_t -phys_efi_set_virtual_address_map(unsigned long memory_map_size, - unsigned long descriptor_size, - u32 descriptor_version, - efi_memory_desc_t *virtual_map) -{ - efi_status_t status; - - efi_call_phys_prelog(); - status = efi_call_phys(efi_phys.set_virtual_address_map, - memory_map_size, descriptor_size, - descriptor_version, virtual_map); - efi_call_phys_epilog(); - return status; -} - -static efi_status_t -phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) -{ - efi_status_t status; - - efi_call_phys_prelog(); - status = efi_call_phys(efi_phys.get_time, tm, tc); - efi_call_phys_epilog(); - return status; -} - -inline int efi_set_rtc_mmss(unsigned long nowtime) -{ - int real_seconds, real_minutes; - efi_status_t status; - efi_time_t eft; - efi_time_cap_t cap; - - spin_lock(&efi_rt_lock); - status = efi.get_time(&eft, &cap); - spin_unlock(&efi_rt_lock); - if (status != EFI_SUCCESS) - panic("Ooops, efitime: can't read time!\n"); - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - - if (((abs(real_minutes - eft.minute) + 15)/30) & 1) - real_minutes += 30; - real_minutes %= 60; - - eft.minute = real_minutes; - eft.second = real_seconds; - - if (status != EFI_SUCCESS) { - printk("Ooops: efitime: can't read time!\n"); - return -1; - } - return 0; -} -/* - * This is used during kernel init before runtime - * services have been remapped and also during suspend, therefore, - * we'll need to call both in physical and virtual modes. - */ -inline unsigned long efi_get_time(void) -{ - efi_status_t status; - efi_time_t eft; - efi_time_cap_t cap; - - if (efi.get_time) { - /* if we are in virtual mode use remapped function */ - status = efi.get_time(&eft, &cap); - } else { - /* we are in physical mode */ - status = phys_efi_get_time(&eft, &cap); - } - - if (status != EFI_SUCCESS) - printk("Oops: efitime: can't read time status: 0x%lx\n",status); - - return mktime(eft.year, eft.month, eft.day, eft.hour, - eft.minute, eft.second); -} - -int is_available_memory(efi_memory_desc_t * md) -{ - if (!(md->attribute & EFI_MEMORY_WB)) - return 0; - - switch (md->type) { - case EFI_LOADER_CODE: - case EFI_LOADER_DATA: - case EFI_BOOT_SERVICES_CODE: - case EFI_BOOT_SERVICES_DATA: - case EFI_CONVENTIONAL_MEMORY: - return 1; - } - return 0; -} - -/* - * We need to map the EFI memory map again after paging_init(). - */ -void __init efi_map_memmap(void) -{ - memmap.map = NULL; - - memmap.map = bt_ioremap((unsigned long) memmap.phys_map, - (memmap.nr_map * memmap.desc_size)); - if (memmap.map == NULL) - printk(KERN_ERR PFX "Could not remap the EFI memmap!\n"); - - memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); -} - -#if EFI_DEBUG -static void __init print_efi_memmap(void) -{ - efi_memory_desc_t *md; - void *p; - int i; - - for (p = memmap.map, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) { - md = p; - printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, " - "range=[0x%016llx-0x%016llx) (%lluMB)\n", - i, md->type, md->attribute, md->phys_addr, - md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT), - (md->num_pages >> (20 - EFI_PAGE_SHIFT))); - } -} -#endif /* EFI_DEBUG */ - -/* - * Walks the EFI memory map and calls CALLBACK once for each EFI - * memory descriptor that has memory that is available for kernel use. - */ -void efi_memmap_walk(efi_freemem_callback_t callback, void *arg) -{ - int prev_valid = 0; - struct range { - unsigned long start; - unsigned long end; - } uninitialized_var(prev), curr; - efi_memory_desc_t *md; - unsigned long start, end; - void *p; - - for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; - - if ((md->num_pages == 0) || (!is_available_memory(md))) - continue; - - curr.start = md->phys_addr; - curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT); - - if (!prev_valid) { - prev = curr; - prev_valid = 1; - } else { - if (curr.start < prev.start) - printk(KERN_INFO PFX "Unordered memory map\n"); - if (prev.end == curr.start) - prev.end = curr.end; - else { - start = - (unsigned long) (PAGE_ALIGN(prev.start)); - end = (unsigned long) (prev.end & PAGE_MASK); - if ((end > start) - && (*callback) (start, end, arg) < 0) - return; - prev = curr; - } - } - } - if (prev_valid) { - start = (unsigned long) PAGE_ALIGN(prev.start); - end = (unsigned long) (prev.end & PAGE_MASK); - if (end > start) - (*callback) (start, end, arg); - } -} - -void __init efi_init(void) -{ - efi_config_table_t *config_tables; - efi_runtime_services_t *runtime; - efi_char16_t *c16; - char vendor[100] = "unknown"; - unsigned long num_config_tables; - int i = 0; - - memset(&efi, 0, sizeof(efi) ); - memset(&efi_phys, 0, sizeof(efi_phys)); - - efi_phys.systab = EFI_SYSTAB; - memmap.phys_map = EFI_MEMMAP; - memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE; - memmap.desc_version = EFI_MEMDESC_VERSION; - memmap.desc_size = EFI_MEMDESC_SIZE; - - efi.systab = (efi_system_table_t *) - boot_ioremap((unsigned long) efi_phys.systab, - sizeof(efi_system_table_t)); - /* - * Verify the EFI Table - */ - if (efi.systab == NULL) - printk(KERN_ERR PFX "Woah! Couldn't map the EFI system table.\n"); - if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) - printk(KERN_ERR PFX "Woah! EFI system table signature incorrect\n"); - if ((efi.systab->hdr.revision >> 16) == 0) - printk(KERN_ERR PFX "Warning: EFI system table version " - "%d.%02d, expected 1.00 or greater\n", - efi.systab->hdr.revision >> 16, - efi.systab->hdr.revision & 0xffff); - - /* - * Grab some details from the system table - */ - num_config_tables = efi.systab->nr_tables; - config_tables = (efi_config_table_t *)efi.systab->tables; - runtime = efi.systab->runtime; - - /* - * Show what we know for posterity - */ - c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2); - if (c16) { - for (i = 0; i < (sizeof(vendor) - 1) && *c16; ++i) - vendor[i] = *c16++; - vendor[i] = '\0'; - } else - printk(KERN_ERR PFX "Could not map the firmware vendor!\n"); - - printk(KERN_INFO PFX "EFI v%u.%.02u by %s \n", - efi.systab->hdr.revision >> 16, - efi.systab->hdr.revision & 0xffff, vendor); - - /* - * Let's see what config tables the firmware passed to us. - */ - config_tables = (efi_config_table_t *) - boot_ioremap((unsigned long) config_tables, - num_config_tables * sizeof(efi_config_table_t)); - - if (config_tables == NULL) - printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n"); - - efi.mps = EFI_INVALID_TABLE_ADDR; - efi.acpi = EFI_INVALID_TABLE_ADDR; - efi.acpi20 = EFI_INVALID_TABLE_ADDR; - efi.smbios = EFI_INVALID_TABLE_ADDR; - efi.sal_systab = EFI_INVALID_TABLE_ADDR; - efi.boot_info = EFI_INVALID_TABLE_ADDR; - efi.hcdp = EFI_INVALID_TABLE_ADDR; - efi.uga = EFI_INVALID_TABLE_ADDR; - - for (i = 0; i < num_config_tables; i++) { - if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { - efi.mps = config_tables[i].table; - printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table); - } else - if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { - efi.acpi20 = config_tables[i].table; - printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table); - } else - if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { - efi.acpi = config_tables[i].table; - printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table); - } else - if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { - efi.smbios = config_tables[i].table; - printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table); - } else - if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { - efi.hcdp = config_tables[i].table; - printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table); - } else - if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) { - efi.uga = config_tables[i].table; - printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table); - } - } - printk("\n"); - - /* - * Check out the runtime services table. We need to map - * the runtime services table so that we can grab the physical - * address of several of the EFI runtime functions, needed to - * set the firmware into virtual mode. - */ - - runtime = (efi_runtime_services_t *) boot_ioremap((unsigned long) - runtime, - sizeof(efi_runtime_services_t)); - if (runtime != NULL) { - /* - * We will only need *early* access to the following - * two EFI runtime services before set_virtual_address_map - * is invoked. - */ - efi_phys.get_time = (efi_get_time_t *) runtime->get_time; - efi_phys.set_virtual_address_map = - (efi_set_virtual_address_map_t *) - runtime->set_virtual_address_map; - } else - printk(KERN_ERR PFX "Could not map the runtime service table!\n"); - - /* Map the EFI memory map for use until paging_init() */ - memmap.map = boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE); - if (memmap.map == NULL) - printk(KERN_ERR PFX "Could not map the EFI memory map!\n"); - - memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); - -#if EFI_DEBUG - print_efi_memmap(); -#endif -} - -static inline void __init check_range_for_systab(efi_memory_desc_t *md) -{ - if (((unsigned long)md->phys_addr <= (unsigned long)efi_phys.systab) && - ((unsigned long)efi_phys.systab < md->phys_addr + - ((unsigned long)md->num_pages << EFI_PAGE_SHIFT))) { - unsigned long addr; - - addr = md->virt_addr - md->phys_addr + - (unsigned long)efi_phys.systab; - efi.systab = (efi_system_table_t *)addr; - } -} - -/* - * Wrap all the virtual calls in a way that forces the parameters on the stack. - */ - -#define efi_call_virt(f, args...) \ - ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args) - -static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) -{ - return efi_call_virt(get_time, tm, tc); -} - -static efi_status_t virt_efi_set_time (efi_time_t *tm) -{ - return efi_call_virt(set_time, tm); -} - -static efi_status_t virt_efi_get_wakeup_time (efi_bool_t *enabled, - efi_bool_t *pending, - efi_time_t *tm) -{ - return efi_call_virt(get_wakeup_time, enabled, pending, tm); -} - -static efi_status_t virt_efi_set_wakeup_time (efi_bool_t enabled, - efi_time_t *tm) -{ - return efi_call_virt(set_wakeup_time, enabled, tm); -} - -static efi_status_t virt_efi_get_variable (efi_char16_t *name, - efi_guid_t *vendor, u32 *attr, - unsigned long *data_size, void *data) -{ - return efi_call_virt(get_variable, name, vendor, attr, data_size, data); -} - -static efi_status_t virt_efi_get_next_variable (unsigned long *name_size, - efi_char16_t *name, - efi_guid_t *vendor) -{ - return efi_call_virt(get_next_variable, name_size, name, vendor); -} - -static efi_status_t virt_efi_set_variable (efi_char16_t *name, - efi_guid_t *vendor, - unsigned long attr, - unsigned long data_size, void *data) -{ - return efi_call_virt(set_variable, name, vendor, attr, data_size, data); -} - -static efi_status_t virt_efi_get_next_high_mono_count (u32 *count) -{ - return efi_call_virt(get_next_high_mono_count, count); -} - -static void virt_efi_reset_system (int reset_type, efi_status_t status, - unsigned long data_size, - efi_char16_t *data) -{ - efi_call_virt(reset_system, reset_type, status, data_size, data); -} - -/* - * This function will switch the EFI runtime services to virtual mode. - * Essentially, look through the EFI memmap and map every region that - * has the runtime attribute bit set in its memory descriptor and update - * that memory descriptor with the virtual address obtained from ioremap(). - * This enables the runtime services to be called without having to - * thunk back into physical mode for every invocation. - */ - -void __init efi_enter_virtual_mode(void) -{ - efi_memory_desc_t *md; - efi_status_t status; - void *p; - - efi.systab = NULL; - - for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; - - if (!(md->attribute & EFI_MEMORY_RUNTIME)) - continue; - - md->virt_addr = (unsigned long)ioremap(md->phys_addr, - md->num_pages << EFI_PAGE_SHIFT); - if (!(unsigned long)md->virt_addr) { - printk(KERN_ERR PFX "ioremap of 0x%lX failed\n", - (unsigned long)md->phys_addr); - } - /* update the virtual address of the EFI system table */ - check_range_for_systab(md); - } - - BUG_ON(!efi.systab); - - status = phys_efi_set_virtual_address_map( - memmap.desc_size * memmap.nr_map, - memmap.desc_size, - memmap.desc_version, - memmap.phys_map); - - if (status != EFI_SUCCESS) { - printk (KERN_ALERT "You are screwed! " - "Unable to switch EFI into virtual mode " - "(status=%lx)\n", status); - panic("EFI call to SetVirtualAddressMap() failed!"); - } - - /* - * Now that EFI is in virtual mode, update the function - * pointers in the runtime service table to the new virtual addresses. - */ - - efi.get_time = virt_efi_get_time; - efi.set_time = virt_efi_set_time; - efi.get_wakeup_time = virt_efi_get_wakeup_time; - efi.set_wakeup_time = virt_efi_set_wakeup_time; - efi.get_variable = virt_efi_get_variable; - efi.get_next_variable = virt_efi_get_next_variable; - efi.set_variable = virt_efi_set_variable; - efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count; - efi.reset_system = virt_efi_reset_system; -} - -void __init -efi_initialize_iomem_resources(struct resource *code_resource, - struct resource *data_resource) -{ - struct resource *res; - efi_memory_desc_t *md; - void *p; - - for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; - - if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) > - 0x100000000ULL) - continue; - res = kzalloc(sizeof(struct resource), GFP_ATOMIC); - switch (md->type) { - case EFI_RESERVED_TYPE: - res->name = "Reserved Memory"; - break; - case EFI_LOADER_CODE: - res->name = "Loader Code"; - break; - case EFI_LOADER_DATA: - res->name = "Loader Data"; - break; - case EFI_BOOT_SERVICES_DATA: - res->name = "BootServices Data"; - break; - case EFI_BOOT_SERVICES_CODE: - res->name = "BootServices Code"; - break; - case EFI_RUNTIME_SERVICES_CODE: - res->name = "Runtime Service Code"; - break; - case EFI_RUNTIME_SERVICES_DATA: - res->name = "Runtime Service Data"; - break; - case EFI_CONVENTIONAL_MEMORY: - res->name = "Conventional Memory"; - break; - case EFI_UNUSABLE_MEMORY: - res->name = "Unusable Memory"; - break; - case EFI_ACPI_RECLAIM_MEMORY: - res->name = "ACPI Reclaim"; - break; - case EFI_ACPI_MEMORY_NVS: - res->name = "ACPI NVS"; - break; - case EFI_MEMORY_MAPPED_IO: - res->name = "Memory Mapped IO"; - break; - case EFI_MEMORY_MAPPED_IO_PORT_SPACE: - res->name = "Memory Mapped IO Port Space"; - break; - default: - res->name = "Reserved"; - break; - } - res->start = md->phys_addr; - res->end = res->start + ((md->num_pages << EFI_PAGE_SHIFT) - 1); - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, res) < 0) - printk(KERN_ERR PFX "Failed to allocate res %s : " - "0x%llx-0x%llx\n", res->name, - (unsigned long long)res->start, - (unsigned long long)res->end); - /* - * We don't know which region contains kernel data so we try - * it repeatedly and let the resource manager test it. - */ - if (md->type == EFI_CONVENTIONAL_MEMORY) { - request_resource(res, code_resource); - request_resource(res, data_resource); -#ifdef CONFIG_KEXEC - request_resource(res, &crashk_res); -#endif - } - } -} - -/* - * Convenience functions to obtain memory types and attributes - */ - -u32 efi_mem_type(unsigned long phys_addr) -{ - efi_memory_desc_t *md; - void *p; - - for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; - if ((md->phys_addr <= phys_addr) && (phys_addr < - (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) - return md->type; - } - return 0; -} - -u64 efi_mem_attributes(unsigned long phys_addr) -{ - efi_memory_desc_t *md; - void *p; - - for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { - md = p; - if ((md->phys_addr <= phys_addr) && (phys_addr < - (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) - return md->attribute; - } - return 0; -} diff --git a/arch/i386/kernel/efi_stub_32.S b/arch/i386/kernel/efi_stub_32.S deleted file mode 100644 index ef00bb7..0000000 --- a/arch/i386/kernel/efi_stub_32.S +++ /dev/null @@ -1,122 +0,0 @@ -/* - * EFI call stub for IA32. - * - * This stub allows us to make EFI calls in physical mode with interrupts - * turned off. - */ - -#include -#include - -/* - * efi_call_phys(void *, ...) is a function with variable parameters. - * All the callers of this function assure that all the parameters are 4-bytes. - */ - -/* - * In gcc calling convention, EBX, ESP, EBP, ESI and EDI are all callee save. - * So we'd better save all of them at the beginning of this function and restore - * at the end no matter how many we use, because we can not assure EFI runtime - * service functions will comply with gcc calling convention, too. - */ - -.text -ENTRY(efi_call_phys) - /* - * 0. The function can only be called in Linux kernel. So CS has been - * set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found - * the values of these registers are the same. And, the corresponding - * GDT entries are identical. So I will do nothing about segment reg - * and GDT, but change GDT base register in prelog and epilog. - */ - - /* - * 1. Now I am running with EIP = + PAGE_OFFSET. - * But to make it smoothly switch from virtual mode to flat mode. - * The mapping of lower virtual memory has been created in prelog and - * epilog. - */ - movl $1f, %edx - subl $__PAGE_OFFSET, %edx - jmp *%edx -1: - - /* - * 2. Now on the top of stack is the return - * address in the caller of efi_call_phys(), then parameter 1, - * parameter 2, ..., param n. To make things easy, we save the return - * address of efi_call_phys in a global variable. - */ - popl %edx - movl %edx, saved_return_addr - /* get the function pointer into ECX*/ - popl %ecx - movl %ecx, efi_rt_function_ptr - movl $2f, %edx - subl $__PAGE_OFFSET, %edx - pushl %edx - - /* - * 3. Clear PG bit in %CR0. - */ - movl %cr0, %edx - andl $0x7fffffff, %edx - movl %edx, %cr0 - jmp 1f -1: - - /* - * 4. Adjust stack pointer. - */ - subl $__PAGE_OFFSET, %esp - - /* - * 5. Call the physical function. - */ - jmp *%ecx - -2: - /* - * 6. After EFI runtime service returns, control will return to - * following instruction. We'd better readjust stack pointer first. - */ - addl $__PAGE_OFFSET, %esp - - /* - * 7. Restore PG bit - */ - movl %cr0, %edx - orl $0x80000000, %edx - movl %edx, %cr0 - jmp 1f -1: - /* - * 8. Now restore the virtual mode from flat mode by - * adding EIP with PAGE_OFFSET. - */ - movl $1f, %edx - jmp *%edx -1: - - /* - * 9. Balance the stack. And because EAX contain the return value, - * we'd better not clobber it. - */ - leal efi_rt_function_ptr, %edx - movl (%edx), %ecx - pushl %ecx - - /* - * 10. Push the saved return address onto the stack and return. - */ - leal saved_return_addr, %edx - movl (%edx), %ecx - pushl %ecx - ret -.previous - -.data -saved_return_addr: - .long 0 -efi_rt_function_ptr: - .long 0 diff --git a/arch/i386/kernel/entry_32.S b/arch/i386/kernel/entry_32.S deleted file mode 100644 index 290b7bc..0000000 --- a/arch/i386/kernel/entry_32.S +++ /dev/null @@ -1,1112 +0,0 @@ -/* - * linux/arch/i386/entry.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - * I changed all the .align's to 4 (16 byte alignment), as that's faster - * on a 486. - * - * Stack layout in 'syscall_exit': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be - * updated in fork.c:copy_process, signal.c:do_signal, - * ptrace.c and ptrace.h - * - * 0(%esp) - %ebx - * 4(%esp) - %ecx - * 8(%esp) - %edx - * C(%esp) - %esi - * 10(%esp) - %edi - * 14(%esp) - %ebp - * 18(%esp) - %eax - * 1C(%esp) - %ds - * 20(%esp) - %es - * 24(%esp) - %fs - * 28(%esp) - orig_eax - * 2C(%esp) - %eip - * 30(%esp) - %cs - * 34(%esp) - %eflags - * 38(%esp) - %oldesp - * 3C(%esp) - %oldss - * - * "current" is in register %ebx during any slow entries. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "irq_vectors.h" - -/* - * We use macros for low-level operations which need to be overridden - * for paravirtualization. The following will never clobber any registers: - * INTERRUPT_RETURN (aka. "iret") - * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") - * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). - * - * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must - * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). - * Allowing a register to be clobbered can shrink the paravirt replacement - * enough to patch inline, increasing performance. - */ - -#define nr_syscalls ((syscall_table_size)/4) - -CF_MASK = 0x00000001 -TF_MASK = 0x00000100 -IF_MASK = 0x00000200 -DF_MASK = 0x00000400 -NT_MASK = 0x00004000 -VM_MASK = 0x00020000 - -#ifdef CONFIG_PREEMPT -#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF -#else -#define preempt_stop(clobbers) -#define resume_kernel restore_nocheck -#endif - -.macro TRACE_IRQS_IRET -#ifdef CONFIG_TRACE_IRQFLAGS - testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off? - jz 1f - TRACE_IRQS_ON -1: -#endif -.endm - -#ifdef CONFIG_VM86 -#define resume_userspace_sig check_userspace -#else -#define resume_userspace_sig resume_userspace -#endif - -#define SAVE_ALL \ - cld; \ - pushl %fs; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET fs, 0;*/\ - pushl %es; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET es, 0;*/\ - pushl %ds; \ - CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET ds, 0;*/\ - pushl %eax; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET eax, 0;\ - pushl %ebp; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ebp, 0;\ - pushl %edi; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET edi, 0;\ - pushl %esi; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET esi, 0;\ - pushl %edx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET edx, 0;\ - pushl %ecx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ecx, 0;\ - pushl %ebx; \ - CFI_ADJUST_CFA_OFFSET 4;\ - CFI_REL_OFFSET ebx, 0;\ - movl $(__USER_DS), %edx; \ - movl %edx, %ds; \ - movl %edx, %es; \ - movl $(__KERNEL_PERCPU), %edx; \ - movl %edx, %fs - -#define RESTORE_INT_REGS \ - popl %ebx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ebx;\ - popl %ecx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ecx;\ - popl %edx; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE edx;\ - popl %esi; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE esi;\ - popl %edi; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE edi;\ - popl %ebp; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE ebp;\ - popl %eax; \ - CFI_ADJUST_CFA_OFFSET -4;\ - CFI_RESTORE eax - -#define RESTORE_REGS \ - RESTORE_INT_REGS; \ -1: popl %ds; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE ds;*/\ -2: popl %es; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE es;*/\ -3: popl %fs; \ - CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE fs;*/\ -.pushsection .fixup,"ax"; \ -4: movl $0,(%esp); \ - jmp 1b; \ -5: movl $0,(%esp); \ - jmp 2b; \ -6: movl $0,(%esp); \ - jmp 3b; \ -.section __ex_table,"a";\ - .align 4; \ - .long 1b,4b; \ - .long 2b,5b; \ - .long 3b,6b; \ -.popsection - -#define RING0_INT_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, 3*4;\ - /*CFI_OFFSET cs, -2*4;*/\ - CFI_OFFSET eip, -3*4 - -#define RING0_EC_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, 4*4;\ - /*CFI_OFFSET cs, -2*4;*/\ - CFI_OFFSET eip, -3*4 - -#define RING0_PTREGS_FRAME \ - CFI_STARTPROC simple;\ - CFI_SIGNAL_FRAME;\ - CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\ - /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\ - CFI_OFFSET eip, PT_EIP-PT_OLDESP;\ - /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\ - /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\ - CFI_OFFSET eax, PT_EAX-PT_OLDESP;\ - CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\ - CFI_OFFSET edi, PT_EDI-PT_OLDESP;\ - CFI_OFFSET esi, PT_ESI-PT_OLDESP;\ - CFI_OFFSET edx, PT_EDX-PT_OLDESP;\ - CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\ - CFI_OFFSET ebx, PT_EBX-PT_OLDESP - -ENTRY(ret_from_fork) - CFI_STARTPROC - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - call schedule_tail - GET_THREAD_INFO(%ebp) - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - pushl $0x0202 # Reset kernel eflags - CFI_ADJUST_CFA_OFFSET 4 - popfl - CFI_ADJUST_CFA_OFFSET -4 - jmp syscall_exit - CFI_ENDPROC -END(ret_from_fork) - -/* - * Return to user mode is not as complex as all this looks, - * but we want the default path for a system call return to - * go as quickly as possible which is why some of this is - * less clear than it otherwise should be. - */ - - # userspace resumption stub bypassing syscall exit tracing - ALIGN - RING0_PTREGS_FRAME -ret_from_exception: - preempt_stop(CLBR_ANY) -ret_from_intr: - GET_THREAD_INFO(%ebp) -check_userspace: - movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS - movb PT_CS(%esp), %al - andl $(VM_MASK | SEGMENT_RPL_MASK), %eax - cmpl $USER_RPL, %eax - jb resume_kernel # not returning to v8086 or userspace - -ENTRY(resume_userspace) - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done on - # int/exception return? - jne work_pending - jmp restore_all -END(ret_from_exception) - -#ifdef CONFIG_PREEMPT -ENTRY(resume_kernel) - DISABLE_INTERRUPTS(CLBR_ANY) - cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? - jnz restore_nocheck -need_resched: - movl TI_flags(%ebp), %ecx # need_resched set ? - testb $_TIF_NEED_RESCHED, %cl - jz restore_all - testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ? - jz restore_all - call preempt_schedule_irq - jmp need_resched -END(resume_kernel) -#endif - CFI_ENDPROC - -/* SYSENTER_RETURN points to after the "sysenter" instruction in - the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ - - # sysenter call handler stub -ENTRY(sysenter_entry) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 0 - CFI_REGISTER esp, ebp - movl TSS_sysenter_esp0(%esp),%esp -sysenter_past_esp: - /* - * No need to follow this irqs on/off section: the syscall - * disabled irqs and here we enable it straight after entry: - */ - ENABLE_INTERRUPTS(CLBR_NONE) - pushl $(__USER_DS) - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET ss, 0*/ - pushl %ebp - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET esp, 0 - pushfl - CFI_ADJUST_CFA_OFFSET 4 - pushl $(__USER_CS) - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET cs, 0*/ - /* - * Push current_thread_info()->sysenter_return to the stack. - * A tiny bit of offset fixup is necessary - 4*4 means the 4 words - * pushed above; +8 corresponds to copy_thread's esp0 setting. - */ - pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET eip, 0 - -/* - * Load the potential sixth argument from user stack. - * Careful about security. - */ - cmpl $__PAGE_OFFSET-3,%ebp - jae syscall_fault -1: movl (%ebp),%ebp -.section __ex_table,"a" - .align 4 - .long 1b,syscall_fault -.previous - - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - GET_THREAD_INFO(%ebp) - - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry - cmpl $(nr_syscalls), %eax - jae syscall_badsys - call *sys_call_table(,%eax,4) - movl %eax,PT_EAX(%esp) - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx - jne syscall_exit_work -/* if something modifies registers it must also disable sysexit */ - movl PT_EIP(%esp), %edx - movl PT_OLDESP(%esp), %ecx - xorl %ebp,%ebp - TRACE_IRQS_ON -1: mov PT_FS(%esp), %fs - ENABLE_INTERRUPTS_SYSEXIT - CFI_ENDPROC -.pushsection .fixup,"ax" -2: movl $0,PT_FS(%esp) - jmp 1b -.section __ex_table,"a" - .align 4 - .long 1b,2b -.popsection -ENDPROC(sysenter_entry) - - # system call handler stub -ENTRY(system_call) - RING0_INT_FRAME # can't unwind into user space anyway - pushl %eax # save orig_eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - GET_THREAD_INFO(%ebp) - # system call tracing in operation / emulation - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry - cmpl $(nr_syscalls), %eax - jae syscall_badsys -syscall_call: - call *sys_call_table(,%eax,4) - movl %eax,PT_EAX(%esp) # store the return value -syscall_exit: - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - TRACE_IRQS_OFF - testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit - jz no_singlestep - orl $_TIF_SINGLESTEP,TI_flags(%ebp) -no_singlestep: - movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx # current->work - jne syscall_exit_work - -restore_all: - movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS - # Warning: PT_OLDSS(%esp) contains the wrong/random values if we - # are returning to the kernel. - # See comments in process.c:copy_thread() for details. - movb PT_OLDSS(%esp), %ah - movb PT_CS(%esp), %al - andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax - cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax - CFI_REMEMBER_STATE - je ldt_ss # returning to user-space with LDT SS -restore_nocheck: - TRACE_IRQS_IRET -restore_nocheck_notrace: - RESTORE_REGS - addl $4, %esp # skip orig_eax/error_code - CFI_ADJUST_CFA_OFFSET -4 -1: INTERRUPT_RETURN -.section .fixup,"ax" -iret_exc: - pushl $0 # no error code - pushl $do_iret_error - jmp error_code -.previous -.section __ex_table,"a" - .align 4 - .long 1b,iret_exc -.previous - - CFI_RESTORE_STATE -ldt_ss: - larl PT_OLDSS(%esp), %eax - jnz restore_nocheck - testl $0x00400000, %eax # returning to 32bit stack? - jnz restore_nocheck # allright, normal return - -#ifdef CONFIG_PARAVIRT - /* - * The kernel can't run on a non-flat stack if paravirt mode - * is active. Rather than try to fixup the high bits of - * ESP, bypass this code entirely. This may break DOSemu - * and/or Wine support in a paravirt VM, although the option - * is still available to implement the setting of the high - * 16-bits in the INTERRUPT_RETURN paravirt-op. - */ - cmpl $0, paravirt_ops+PARAVIRT_enabled - jne restore_nocheck -#endif - - /* If returning to userspace with 16bit stack, - * try to fix the higher word of ESP, as the CPU - * won't restore it. - * This is an "official" bug of all the x86-compatible - * CPUs, which we can try to work around to make - * dosemu and wine happy. */ - movl PT_OLDESP(%esp), %eax - movl %esp, %edx - call patch_espfix_desc - pushl $__ESPFIX_SS - CFI_ADJUST_CFA_OFFSET 4 - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - DISABLE_INTERRUPTS(CLBR_EAX) - TRACE_IRQS_OFF - lss (%esp), %esp - CFI_ADJUST_CFA_OFFSET -8 - jmp restore_nocheck - CFI_ENDPROC -ENDPROC(system_call) - - # perform work that needs to be done immediately before resumption - ALIGN - RING0_PTREGS_FRAME # can't unwind into user space anyway -work_pending: - testb $_TIF_NEED_RESCHED, %cl - jz work_notifysig -work_resched: - call schedule - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret - TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done other - # than syscall tracing? - jz restore_all - testb $_TIF_NEED_RESCHED, %cl - jnz work_resched - -work_notifysig: # deal with pending signals and - # notify-resume requests -#ifdef CONFIG_VM86 - testl $VM_MASK, PT_EFLAGS(%esp) - movl %esp, %eax - jne work_notifysig_v86 # returning to kernel-space or - # vm86-space - xorl %edx, %edx - call do_notify_resume - jmp resume_userspace_sig - - ALIGN -work_notifysig_v86: - pushl %ecx # save ti_flags for do_notify_resume - CFI_ADJUST_CFA_OFFSET 4 - call save_v86_state # %eax contains pt_regs pointer - popl %ecx - CFI_ADJUST_CFA_OFFSET -4 - movl %eax, %esp -#else - movl %esp, %eax -#endif - xorl %edx, %edx - call do_notify_resume - jmp resume_userspace_sig -END(work_pending) - - # perform syscall exit tracing - ALIGN -syscall_trace_entry: - movl $-ENOSYS,PT_EAX(%esp) - movl %esp, %eax - xorl %edx,%edx - call do_syscall_trace - cmpl $0, %eax - jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, - # so must skip actual syscall - movl PT_ORIG_EAX(%esp), %eax - cmpl $(nr_syscalls), %eax - jnae syscall_call - jmp syscall_exit -END(syscall_trace_entry) - - # perform syscall exit tracing - ALIGN -syscall_exit_work: - testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl - jz work_pending - TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call - # schedule() instead - movl %esp, %eax - movl $1, %edx - call do_syscall_trace - jmp resume_userspace -END(syscall_exit_work) - CFI_ENDPROC - - RING0_INT_FRAME # can't unwind into user space anyway -syscall_fault: - pushl %eax # save orig_eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - GET_THREAD_INFO(%ebp) - movl $-EFAULT,PT_EAX(%esp) - jmp resume_userspace -END(syscall_fault) - -syscall_badsys: - movl $-ENOSYS,PT_EAX(%esp) - jmp resume_userspace -END(syscall_badsys) - CFI_ENDPROC - -#define FIXUP_ESPFIX_STACK \ - /* since we are on a wrong stack, we cant make it a C code :( */ \ - PER_CPU(gdt_page, %ebx); \ - GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ - addl %esp, %eax; \ - pushl $__KERNEL_DS; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl %eax; \ - CFI_ADJUST_CFA_OFFSET 4; \ - lss (%esp), %esp; \ - CFI_ADJUST_CFA_OFFSET -8; -#define UNWIND_ESPFIX_STACK \ - movl %ss, %eax; \ - /* see if on espfix stack */ \ - cmpw $__ESPFIX_SS, %ax; \ - jne 27f; \ - movl $__KERNEL_DS, %eax; \ - movl %eax, %ds; \ - movl %eax, %es; \ - /* switch to normal stack */ \ - FIXUP_ESPFIX_STACK; \ -27:; - -/* - * Build the entry stubs and pointer table with - * some assembler magic. - */ -.data -ENTRY(interrupt) -.text - -ENTRY(irq_entries_start) - RING0_INT_FRAME -vector=0 -.rept NR_IRQS - ALIGN - .if vector - CFI_ADJUST_CFA_OFFSET -4 - .endif -1: pushl $~(vector) - CFI_ADJUST_CFA_OFFSET 4 - jmp common_interrupt - .previous - .long 1b - .text -vector=vector+1 -.endr -END(irq_entries_start) - -.previous -END(interrupt) -.previous - -/* - * the CPU automatically disables interrupts when executing an IRQ vector, - * so IRQ-flags tracing has to follow that: - */ - ALIGN -common_interrupt: - SAVE_ALL - TRACE_IRQS_OFF - movl %esp,%eax - call do_IRQ - jmp ret_from_intr -ENDPROC(common_interrupt) - CFI_ENDPROC - -#define BUILD_INTERRUPT(name, nr) \ -ENTRY(name) \ - RING0_INT_FRAME; \ - pushl $~(nr); \ - CFI_ADJUST_CFA_OFFSET 4; \ - SAVE_ALL; \ - TRACE_IRQS_OFF \ - movl %esp,%eax; \ - call smp_##name; \ - jmp ret_from_intr; \ - CFI_ENDPROC; \ -ENDPROC(name) - -/* The include is where all of the SMP etc. interrupts come from */ -#include "entry_arch.h" - -KPROBE_ENTRY(page_fault) - RING0_EC_FRAME - pushl $do_page_fault - CFI_ADJUST_CFA_OFFSET 4 - ALIGN -error_code: - /* the function address is in %fs's slot on the stack */ - pushl %es - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET es, 0*/ - pushl %ds - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET ds, 0*/ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET eax, 0 - pushl %ebp - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebp, 0 - pushl %edi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edi, 0 - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET esi, 0 - pushl %edx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edx, 0 - pushl %ecx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ecx, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebx, 0 - cld - pushl %fs - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET fs, 0*/ - movl $(__KERNEL_PERCPU), %ecx - movl %ecx, %fs - UNWIND_ESPFIX_STACK - popl %ecx - CFI_ADJUST_CFA_OFFSET -4 - /*CFI_REGISTER es, ecx*/ - movl PT_FS(%esp), %edi # get the function address - movl PT_ORIG_EAX(%esp), %edx # get the error code - movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_FS(%esp) - /*CFI_REL_OFFSET fs, ES*/ - movl $(__USER_DS), %ecx - movl %ecx, %ds - movl %ecx, %es - movl %esp,%eax # pt_regs pointer - call *%edi - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(page_fault) - -ENTRY(coprocessor_error) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_coprocessor_error - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(coprocessor_error) - -ENTRY(simd_coprocessor_error) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_simd_coprocessor_error - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(simd_coprocessor_error) - -ENTRY(device_not_available) - RING0_INT_FRAME - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - GET_CR0_INTO_EAX - testl $0x4, %eax # EM (math emulation bit) - jne device_not_available_emulate - preempt_stop(CLBR_ANY) - call math_state_restore - jmp ret_from_exception -device_not_available_emulate: - pushl $0 # temporary storage for ORIG_EIP - CFI_ADJUST_CFA_OFFSET 4 - call math_emulate - addl $4, %esp - CFI_ADJUST_CFA_OFFSET -4 - jmp ret_from_exception - CFI_ENDPROC -END(device_not_available) - -/* - * Debug traps and NMI can happen at the one SYSENTER instruction - * that sets up the real kernel stack. Check here, since we can't - * allow the wrong stack to be used. - * - * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have - * already pushed 3 words if it hits on the sysenter instruction: - * eflags, cs and eip. - * - * We just load the right stack, and push the three (known) values - * by hand onto the new stack - while updating the return eip past - * the instruction that would have done it for sysenter. - */ -#define FIX_STACK(offset, ok, label) \ - cmpw $__KERNEL_CS,4(%esp); \ - jne ok; \ -label: \ - movl TSS_sysenter_esp0+offset(%esp),%esp; \ - CFI_DEF_CFA esp, 0; \ - CFI_UNDEFINED eip; \ - pushfl; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $__KERNEL_CS; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $sysenter_past_esp; \ - CFI_ADJUST_CFA_OFFSET 4; \ - CFI_REL_OFFSET eip, 0 - -KPROBE_ENTRY(debug) - RING0_INT_FRAME - cmpl $sysenter_entry,(%esp) - jne debug_stack_correct - FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) -debug_stack_correct: - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # error code 0 - movl %esp,%eax # pt_regs pointer - call do_debug - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(debug) - -/* - * NMI is doubly nasty. It can happen _while_ we're handling - * a debug fault, and the debug fault hasn't yet been able to - * clear up the stack. So we first check whether we got an - * NMI on the sysenter entry path, but after that we need to - * check whether we got an NMI on the debug path where the debug - * fault happened on the sysenter path. - */ -KPROBE_ENTRY(nmi) - RING0_INT_FRAME - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %ss, %eax - cmpw $__ESPFIX_SS, %ax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - je nmi_espfix_stack - cmpl $sysenter_entry,(%esp) - je nmi_stack_fixup - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %esp,%eax - /* Do not access memory above the end of our stack page, - * it might not exist. - */ - andl $(THREAD_SIZE-1),%eax - cmpl $(THREAD_SIZE-20),%eax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - jae nmi_stack_correct - cmpl $sysenter_entry,12(%esp) - je nmi_debug_stack_check -nmi_stack_correct: - /* We have a RING0_INT_FRAME here */ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_nmi - jmp restore_nocheck_notrace - CFI_ENDPROC - -nmi_stack_fixup: - RING0_INT_FRAME - FIX_STACK(12,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_debug_stack_check: - /* We have a RING0_INT_FRAME here */ - cmpw $__KERNEL_CS,16(%esp) - jne nmi_stack_correct - cmpl $debug,(%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn,(%esp) - ja nmi_stack_correct - FIX_STACK(24,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_espfix_stack: - /* We have a RING0_INT_FRAME here. - * - * create the pointer to lss back - */ - pushl %ss - CFI_ADJUST_CFA_OFFSET 4 - pushl %esp - CFI_ADJUST_CFA_OFFSET 4 - addw $4, (%esp) - /* copy the iret frame of 12 bytes */ - .rept 3 - pushl 16(%esp) - CFI_ADJUST_CFA_OFFSET 4 - .endr - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - FIXUP_ESPFIX_STACK # %eax == %esp - xorl %edx,%edx # zero error code - call do_nmi - RESTORE_REGS - lss 12+4(%esp), %esp # back to espfix stack - CFI_ADJUST_CFA_OFFSET -24 -1: INTERRUPT_RETURN - CFI_ENDPROC -.section __ex_table,"a" - .align 4 - .long 1b,iret_exc -.previous -KPROBE_END(nmi) - -#ifdef CONFIG_PARAVIRT -ENTRY(native_iret) -1: iret -.section __ex_table,"a" - .align 4 - .long 1b,iret_exc -.previous -END(native_iret) - -ENTRY(native_irq_enable_sysexit) - sti - sysexit -END(native_irq_enable_sysexit) -#endif - -KPROBE_ENTRY(int3) - RING0_INT_FRAME - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_int3 - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(int3) - -ENTRY(overflow) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_overflow - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(overflow) - -ENTRY(bounds) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_bounds - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(bounds) - -ENTRY(invalid_op) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_invalid_op - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(invalid_op) - -ENTRY(coprocessor_segment_overrun) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_coprocessor_segment_overrun - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(coprocessor_segment_overrun) - -ENTRY(invalid_TSS) - RING0_EC_FRAME - pushl $do_invalid_TSS - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(invalid_TSS) - -ENTRY(segment_not_present) - RING0_EC_FRAME - pushl $do_segment_not_present - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(segment_not_present) - -ENTRY(stack_segment) - RING0_EC_FRAME - pushl $do_stack_segment - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(stack_segment) - -KPROBE_ENTRY(general_protection) - RING0_EC_FRAME - pushl $do_general_protection - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -KPROBE_END(general_protection) - -ENTRY(alignment_check) - RING0_EC_FRAME - pushl $do_alignment_check - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(alignment_check) - -ENTRY(divide_error) - RING0_INT_FRAME - pushl $0 # no error code - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_divide_error - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(divide_error) - -#ifdef CONFIG_X86_MCE -ENTRY(machine_check) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl machine_check_vector - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(machine_check) -#endif - -ENTRY(spurious_interrupt_bug) - RING0_INT_FRAME - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - pushl $do_spurious_interrupt_bug - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -END(spurious_interrupt_bug) - -ENTRY(kernel_thread_helper) - pushl $0 # fake return address for unwinder - CFI_STARTPROC - movl %edx,%eax - push %edx - CFI_ADJUST_CFA_OFFSET 4 - call *%ebx - push %eax - CFI_ADJUST_CFA_OFFSET 4 - call do_exit - CFI_ENDPROC -ENDPROC(kernel_thread_helper) - -#ifdef CONFIG_XEN -ENTRY(xen_hypervisor_callback) - CFI_STARTPROC - pushl $0 - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - TRACE_IRQS_OFF - - /* Check to see if we got the event in the critical - region in xen_iret_direct, after we've reenabled - events and checked for pending events. This simulates - iret instruction's behaviour where it delivers a - pending interrupt when enabling interrupts. */ - movl PT_EIP(%esp),%eax - cmpl $xen_iret_start_crit,%eax - jb 1f - cmpl $xen_iret_end_crit,%eax - jae 1f - - call xen_iret_crit_fixup - -1: mov %esp, %eax - call xen_evtchn_do_upcall - jmp ret_from_intr - CFI_ENDPROC -ENDPROC(xen_hypervisor_callback) - -# Hypervisor uses this for application faults while it executes. -# We get here for two reasons: -# 1. Fault while reloading DS, ES, FS or GS -# 2. Fault while executing IRET -# Category 1 we fix up by reattempting the load, and zeroing the segment -# register if the load fails. -# Category 2 we fix up by jumping to do_iret_error. We cannot use the -# normal Linux return path in this case because if we use the IRET hypercall -# to pop the stack frame we end up in an infinite loop of failsafe callbacks. -# We distinguish between categories by maintaining a status value in EAX. -ENTRY(xen_failsafe_callback) - CFI_STARTPROC - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl $1,%eax -1: mov 4(%esp),%ds -2: mov 8(%esp),%es -3: mov 12(%esp),%fs -4: mov 16(%esp),%gs - testl %eax,%eax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - lea 16(%esp),%esp - CFI_ADJUST_CFA_OFFSET -16 - jz 5f - addl $16,%esp - jmp iret_exc # EAX != 0 => Category 2 (Bad IRET) -5: pushl $0 # EAX == 0 => Category 1 (Bad segment) - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - jmp ret_from_exception - CFI_ENDPROC - -.section .fixup,"ax" -6: xorl %eax,%eax - movl %eax,4(%esp) - jmp 1b -7: xorl %eax,%eax - movl %eax,8(%esp) - jmp 2b -8: xorl %eax,%eax - movl %eax,12(%esp) - jmp 3b -9: xorl %eax,%eax - movl %eax,16(%esp) - jmp 4b -.previous -.section __ex_table,"a" - .align 4 - .long 1b,6b - .long 2b,7b - .long 3b,8b - .long 4b,9b -.previous -ENDPROC(xen_failsafe_callback) - -#endif /* CONFIG_XEN */ - -.section .rodata,"a" -#include "syscall_table_32.S" - -syscall_table_size=(.-sys_call_table) diff --git a/arch/i386/kernel/geode_32.c b/arch/i386/kernel/geode_32.c deleted file mode 100644 index 41e8aec..0000000 --- a/arch/i386/kernel/geode_32.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * AMD Geode southbridge support code - * Copyright (C) 2006, Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -static struct { - char *name; - u32 msr; - int size; - u32 base; -} lbars[] = { - { "geode-pms", MSR_LBAR_PMS, LBAR_PMS_SIZE, 0 }, - { "geode-acpi", MSR_LBAR_ACPI, LBAR_ACPI_SIZE, 0 }, - { "geode-gpio", MSR_LBAR_GPIO, LBAR_GPIO_SIZE, 0 }, - { "geode-mfgpt", MSR_LBAR_MFGPT, LBAR_MFGPT_SIZE, 0 } -}; - -static void __init init_lbars(void) -{ - u32 lo, hi; - int i; - - for (i = 0; i < ARRAY_SIZE(lbars); i++) { - rdmsr(lbars[i].msr, lo, hi); - if (hi & 0x01) - lbars[i].base = lo & 0x0000ffff; - - if (lbars[i].base == 0) - printk(KERN_ERR "geode: Couldn't initialize '%s'\n", - lbars[i].name); - } -} - -int geode_get_dev_base(unsigned int dev) -{ - BUG_ON(dev >= ARRAY_SIZE(lbars)); - return lbars[dev].base; -} -EXPORT_SYMBOL_GPL(geode_get_dev_base); - -/* === GPIO API === */ - -void geode_gpio_set(unsigned int gpio, unsigned int reg) -{ - u32 base = geode_get_dev_base(GEODE_DEV_GPIO); - - if (!base) - return; - - if (gpio < 16) - outl(1 << gpio, base + reg); - else - outl(1 << (gpio - 16), base + 0x80 + reg); -} -EXPORT_SYMBOL_GPL(geode_gpio_set); - -void geode_gpio_clear(unsigned int gpio, unsigned int reg) -{ - u32 base = geode_get_dev_base(GEODE_DEV_GPIO); - - if (!base) - return; - - if (gpio < 16) - outl(1 << (gpio + 16), base + reg); - else - outl(1 << gpio, base + 0x80 + reg); -} -EXPORT_SYMBOL_GPL(geode_gpio_clear); - -int geode_gpio_isset(unsigned int gpio, unsigned int reg) -{ - u32 base = geode_get_dev_base(GEODE_DEV_GPIO); - - if (!base) - return 0; - - if (gpio < 16) - return (inl(base + reg) & (1 << gpio)) ? 1 : 0; - else - return (inl(base + 0x80 + reg) & (1 << (gpio - 16))) ? 1 : 0; -} -EXPORT_SYMBOL_GPL(geode_gpio_isset); - -void geode_gpio_set_irq(unsigned int group, unsigned int irq) -{ - u32 lo, hi; - - if (group > 7 || irq > 15) - return; - - rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi); - - lo &= ~(0xF << (group * 4)); - lo |= (irq & 0xF) << (group * 4); - - wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi); -} -EXPORT_SYMBOL_GPL(geode_gpio_set_irq); - -void geode_gpio_setup_event(unsigned int gpio, int pair, int pme) -{ - u32 base = geode_get_dev_base(GEODE_DEV_GPIO); - u32 offset, shift, val; - - if (gpio >= 24) - offset = GPIO_MAP_W; - else if (gpio >= 16) - offset = GPIO_MAP_Z; - else if (gpio >= 8) - offset = GPIO_MAP_Y; - else - offset = GPIO_MAP_X; - - shift = (gpio % 8) * 4; - - val = inl(base + offset); - - /* Clear whatever was there before */ - val &= ~(0xF << shift); - - /* And set the new value */ - - val |= ((pair & 7) << shift); - - /* Set the PME bit if this is a PME event */ - - if (pme) - val |= (1 << (shift + 3)); - - outl(val, base + offset); -} -EXPORT_SYMBOL_GPL(geode_gpio_setup_event); - -static int __init geode_southbridge_init(void) -{ - if (!is_geode()) - return -ENODEV; - - init_lbars(); - return 0; -} - -postcore_initcall(geode_southbridge_init); diff --git a/arch/i386/kernel/head_32.S b/arch/i386/kernel/head_32.S deleted file mode 100644 index 9150ca9..0000000 --- a/arch/i386/kernel/head_32.S +++ /dev/null @@ -1,578 +0,0 @@ -/* - * linux/arch/i386/kernel/head.S -- the 32-bit startup code. - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Enhanced CPU detection and feature setting code by Mike Jagdis - * and Martin Mares, November 1997. - */ - -.text -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * References to members of the new_cpu_data structure. - */ - -#define X86 new_cpu_data+CPUINFO_x86 -#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor -#define X86_MODEL new_cpu_data+CPUINFO_x86_model -#define X86_MASK new_cpu_data+CPUINFO_x86_mask -#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math -#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level -#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability -#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id - -/* - * This is how much memory *in addition to the memory covered up to - * and including _end* we need mapped initially. - * We need: - * - one bit for each possible page, but only in low memory, which means - * 2^32/4096/8 = 128K worst case (4G/4G split.) - * - enough space to map all low memory, which means - * (2^32/4096) / 1024 pages (worst case, non PAE) - * (2^32/4096) / 512 + 4 pages (worst case for PAE) - * - a few pages for allocator use before the kernel pagetable has - * been set up - * - * Modulo rounding, each megabyte assigned here requires a kilobyte of - * memory, which is currently unreclaimed. - * - * This should be a multiple of a page. - */ -LOW_PAGES = 1<<(32-PAGE_SHIFT_asm) - -#if PTRS_PER_PMD > 1 -PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD -#else -PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD) -#endif -BOOTBITMAP_SIZE = LOW_PAGES / 8 -ALLOCATOR_SLOP = 4 - -INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm - -/* - * 32-bit kernel entrypoint; only used by the boot CPU. On entry, - * %esi points to the real-mode code as a 32-bit pointer. - * CS and DS must be 4 GB flat segments, but we don't depend on - * any particular GDT layout, because we load our own as soon as we - * can. - */ -.section .text.head,"ax",@progbits -ENTRY(startup_32) - -/* - * Set segments to known values. - */ - cld - lgdt boot_gdt_descr - __PAGE_OFFSET - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - -/* - * Clear BSS first so that there are no surprises... - * No need to cld as DF is already clear from cld above... - */ - xorl %eax,%eax - movl $__bss_start - __PAGE_OFFSET,%edi - movl $__bss_stop - __PAGE_OFFSET,%ecx - subl %edi,%ecx - shrl $2,%ecx - rep ; stosl -/* - * Copy bootup parameters out of the way. - * Note: %esi still has the pointer to the real-mode data. - * With the kexec as boot loader, parameter segment might be loaded beyond - * kernel image and might not even be addressable by early boot page tables. - * (kexec on panic case). Hence copy out the parameters before initializing - * page tables. - */ - movl $(boot_params - __PAGE_OFFSET),%edi - movl $(PARAM_SIZE/4),%ecx - cld - rep - movsl - movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi - andl %esi,%esi - jnz 2f # New command line protocol - cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR - jne 1f - movzwl OLD_CL_OFFSET,%esi - addl $(OLD_CL_BASE_ADDR),%esi -2: - movl $(boot_command_line - __PAGE_OFFSET),%edi - movl $(COMMAND_LINE_SIZE/4),%ecx - rep - movsl -1: - -/* - * Initialize page tables. This creates a PDE and a set of page - * tables, which are located immediately beyond _end. The variable - * init_pg_tables_end is set up to point to the first "safe" location. - * Mappings are created both at virtual address 0 (identity mapping) - * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END. - * - * Warning: don't use %esi or the stack in this code. However, %esp - * can be used as a GPR if you really need it... - */ -page_pde_offset = (__PAGE_OFFSET >> 20); - - movl $(pg0 - __PAGE_OFFSET), %edi - movl $(swapper_pg_dir - __PAGE_OFFSET), %edx - movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ -10: - leal 0x007(%edi),%ecx /* Create PDE entry */ - movl %ecx,(%edx) /* Store identity PDE entry */ - movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ - addl $4,%edx - movl $1024, %ecx -11: - stosl - addl $0x1000,%eax - loop 11b - /* End condition: we must map up to and including INIT_MAP_BEYOND_END */ - /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */ - leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp - cmpl %ebp,%eax - jb 10b - movl %edi,(init_pg_tables_end - __PAGE_OFFSET) - - xorl %ebx,%ebx /* This is the boot CPU (BSP) */ - jmp 3f -/* - * Non-boot CPU entry point; entered from trampoline.S - * We can't lgdt here, because lgdt itself uses a data segment, but - * we know the trampoline has already loaded the boot_gdt for us. - * - * If cpu hotplug is not supported then this code can go in init section - * which will be freed later - */ - -#ifndef CONFIG_HOTPLUG_CPU -.section .init.text,"ax",@progbits -#endif - - /* Do an early initialization of the fixmap area */ - movl $(swapper_pg_dir - __PAGE_OFFSET), %edx - movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax - addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ - movl %eax, 4092(%edx) - -#ifdef CONFIG_SMP -ENTRY(startup_32_smp) - cld - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - -/* - * New page tables may be in 4Mbyte page mode and may - * be using the global pages. - * - * NOTE! If we are on a 486 we may have no cr4 at all! - * So we do not try to touch it unless we really have - * some bits in it to set. This won't work if the BSP - * implements cr4 but this AP does not -- very unlikely - * but be warned! The same applies to the pse feature - * if not equally supported. --macro - * - * NOTE! We have to correct for the fact that we're - * not yet offset PAGE_OFFSET.. - */ -#define cr4_bits mmu_cr4_features-__PAGE_OFFSET - movl cr4_bits,%edx - andl %edx,%edx - jz 6f - movl %cr4,%eax # Turn on paging options (PSE,PAE,..) - orl %edx,%eax - movl %eax,%cr4 - - btl $5, %eax # check if PAE is enabled - jnc 6f - - /* Check if extended functions are implemented */ - movl $0x80000000, %eax - cpuid - cmpl $0x80000000, %eax - jbe 6f - mov $0x80000001, %eax - cpuid - /* Execute Disable bit supported? */ - btl $20, %edx - jnc 6f - - /* Setup EFER (Extended Feature Enable Register) */ - movl $0xc0000080, %ecx - rdmsr - - btsl $11, %eax - /* Make changes effective */ - wrmsr - -6: - /* This is a secondary processor (AP) */ - xorl %ebx,%ebx - incl %ebx - -#endif /* CONFIG_SMP */ -3: - -/* - * Enable paging - */ - movl $swapper_pg_dir-__PAGE_OFFSET,%eax - movl %eax,%cr3 /* set the page table pointer.. */ - movl %cr0,%eax - orl $0x80000000,%eax - movl %eax,%cr0 /* ..and set paging (PG) bit */ - ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ -1: - /* Set up the stack pointer */ - lss stack_start,%esp - -/* - * Initialize eflags. Some BIOS's leave bits like NT set. This would - * confuse the debugger if this code is traced. - * XXX - best to initialize before switching to protected mode. - */ - pushl $0 - popfl - -#ifdef CONFIG_SMP - andl %ebx,%ebx - jz 1f /* Initial CPU cleans BSS */ - jmp checkCPUtype -1: -#endif /* CONFIG_SMP */ - -/* - * start system 32-bit setup. We need to re-do some of the things done - * in 16-bit mode for the "real" operations. - */ - call setup_idt - -checkCPUtype: - - movl $-1,X86_CPUID # -1 for no CPUID initially - -/* check if it is 486 or 386. */ -/* - * XXX - this does a lot of unnecessary setup. Alignment checks don't - * apply at our cpl of 0 and the stack ought to be aligned already, and - * we don't need to preserve eflags. - */ - - movb $3,X86 # at least 386 - pushfl # push EFLAGS - popl %eax # get EFLAGS - movl %eax,%ecx # save original EFLAGS - xorl $0x240000,%eax # flip AC and ID bits in EFLAGS - pushl %eax # copy to EFLAGS - popfl # set EFLAGS - pushfl # get new EFLAGS - popl %eax # put it in eax - xorl %ecx,%eax # change in flags - pushl %ecx # restore original EFLAGS - popfl - testl $0x40000,%eax # check if AC bit changed - je is386 - - movb $4,X86 # at least 486 - testl $0x200000,%eax # check if ID bit changed - je is486 - - /* get vendor info */ - xorl %eax,%eax # call CPUID with 0 -> return vendor ID - cpuid - movl %eax,X86_CPUID # save CPUID level - movl %ebx,X86_VENDOR_ID # lo 4 chars - movl %edx,X86_VENDOR_ID+4 # next 4 chars - movl %ecx,X86_VENDOR_ID+8 # last 4 chars - - orl %eax,%eax # do we have processor info as well? - je is486 - - movl $1,%eax # Use the CPUID instruction to get CPU type - cpuid - movb %al,%cl # save reg for future use - andb $0x0f,%ah # mask processor family - movb %ah,X86 - andb $0xf0,%al # mask model - shrb $4,%al - movb %al,X86_MODEL - andb $0x0f,%cl # mask mask revision - movb %cl,X86_MASK - movl %edx,X86_CAPABILITY - -is486: movl $0x50022,%ecx # set AM, WP, NE and MP - jmp 2f - -is386: movl $2,%ecx # set MP -2: movl %cr0,%eax - andl $0x80000011,%eax # Save PG,PE,ET - orl %ecx,%eax - movl %eax,%cr0 - - call check_x87 - lgdt early_gdt_descr - lidt idt_descr - ljmp $(__KERNEL_CS),$1f -1: movl $(__KERNEL_DS),%eax # reload all the segment registers - movl %eax,%ss # after changing gdt. - movl %eax,%fs # gets reset once there's real percpu - - movl $(__USER_DS),%eax # DS/ES contains default USER segment - movl %eax,%ds - movl %eax,%es - - xorl %eax,%eax # Clear GS and LDT - movl %eax,%gs - lldt %ax - - cld # gcc2 wants the direction flag cleared at all times - pushl $0 # fake return address for unwinder -#ifdef CONFIG_SMP - movb ready, %cl - movb $1, ready - cmpb $0,%cl # the first CPU calls start_kernel - je 1f - movl $(__KERNEL_PERCPU), %eax - movl %eax,%fs # set this cpu's percpu - jmp initialize_secondary # all other CPUs call initialize_secondary -1: -#endif /* CONFIG_SMP */ - jmp start_kernel - -/* - * We depend on ET to be correct. This checks for 287/387. - */ -check_x87: - movb $0,X86_HARD_MATH - clts - fninit - fstsw %ax - cmpb $0,%al - je 1f - movl %cr0,%eax /* no coprocessor: have to set bits */ - xorl $4,%eax /* set EM */ - movl %eax,%cr0 - ret - ALIGN -1: movb $1,X86_HARD_MATH - .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */ - ret - -/* - * setup_idt - * - * sets up a idt with 256 entries pointing to - * ignore_int, interrupt gates. It doesn't actually load - * idt - that can be done only after paging has been enabled - * and the kernel moved to PAGE_OFFSET. Interrupts - * are enabled elsewhere, when we can be relatively - * sure everything is ok. - * - * Warning: %esi is live across this function. - */ -setup_idt: - lea ignore_int,%edx - movl $(__KERNEL_CS << 16),%eax - movw %dx,%ax /* selector = 0x0010 = cs */ - movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ - - lea idt_table,%edi - mov $256,%ecx -rp_sidt: - movl %eax,(%edi) - movl %edx,4(%edi) - addl $8,%edi - dec %ecx - jne rp_sidt - -.macro set_early_handler handler,trapno - lea \handler,%edx - movl $(__KERNEL_CS << 16),%eax - movw %dx,%ax - movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ - lea idt_table,%edi - movl %eax,8*\trapno(%edi) - movl %edx,8*\trapno+4(%edi) -.endm - - set_early_handler handler=early_divide_err,trapno=0 - set_early_handler handler=early_illegal_opcode,trapno=6 - set_early_handler handler=early_protection_fault,trapno=13 - set_early_handler handler=early_page_fault,trapno=14 - - ret - -early_divide_err: - xor %edx,%edx - pushl $0 /* fake errcode */ - jmp early_fault - -early_illegal_opcode: - movl $6,%edx - pushl $0 /* fake errcode */ - jmp early_fault - -early_protection_fault: - movl $13,%edx - jmp early_fault - -early_page_fault: - movl $14,%edx - jmp early_fault - -early_fault: - cld -#ifdef CONFIG_PRINTK - movl $(__KERNEL_DS),%eax - movl %eax,%ds - movl %eax,%es - cmpl $2,early_recursion_flag - je hlt_loop - incl early_recursion_flag - movl %cr2,%eax - pushl %eax - pushl %edx /* trapno */ - pushl $fault_msg -#ifdef CONFIG_EARLY_PRINTK - call early_printk -#else - call printk -#endif -#endif -hlt_loop: - hlt - jmp hlt_loop - -/* This is the default interrupt "handler" :-) */ - ALIGN -ignore_int: - cld -#ifdef CONFIG_PRINTK - pushl %eax - pushl %ecx - pushl %edx - pushl %es - pushl %ds - movl $(__KERNEL_DS),%eax - movl %eax,%ds - movl %eax,%es - cmpl $2,early_recursion_flag - je hlt_loop - incl early_recursion_flag - pushl 16(%esp) - pushl 24(%esp) - pushl 32(%esp) - pushl 40(%esp) - pushl $int_msg -#ifdef CONFIG_EARLY_PRINTK - call early_printk -#else - call printk -#endif - addl $(5*4),%esp - popl %ds - popl %es - popl %edx - popl %ecx - popl %eax -#endif - iret - -.section .text -/* - * Real beginning of normal "text" segment - */ -ENTRY(stext) -ENTRY(_stext) - -/* - * BSS section - */ -.section ".bss.page_aligned","wa" - .align PAGE_SIZE_asm -ENTRY(swapper_pg_dir) - .fill 1024,4,0 -ENTRY(swapper_pg_pmd) - .fill 1024,4,0 -ENTRY(empty_zero_page) - .fill 4096,1,0 - -/* - * This starts the data section. - */ -.data -ENTRY(stack_start) - .long init_thread_union+THREAD_SIZE - .long __BOOT_DS - -ready: .byte 0 - -early_recursion_flag: - .long 0 - -int_msg: - .asciz "Unknown interrupt or fault at EIP %p %p %p\n" - -fault_msg: - .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n" - .asciz "Stack: %p %p %p %p %p %p %p %p\n" - -#include "../../x86/xen/xen-head.S" - -/* - * The IDT and GDT 'descriptors' are a strange 48-bit object - * only used by the lidt and lgdt instructions. They are not - * like usual segment descriptors - they consist of a 16-bit - * segment size, and 32-bit linear address value: - */ - -.globl boot_gdt_descr -.globl idt_descr - - ALIGN -# early boot GDT descriptor (must use 1:1 address mapping) - .word 0 # 32 bit align gdt_desc.address -boot_gdt_descr: - .word __BOOT_DS+7 - .long boot_gdt - __PAGE_OFFSET - - .word 0 # 32-bit align idt_desc.address -idt_descr: - .word IDT_ENTRIES*8-1 # idt contains 256 entries - .long idt_table - -# boot GDT descriptor (later on used by CPU#0): - .word 0 # 32 bit align gdt_desc.address -ENTRY(early_gdt_descr) - .word GDT_ENTRIES*8-1 - .long per_cpu__gdt_page /* Overwritten for secondary CPUs */ - -/* - * The boot_gdt must mirror the equivalent in setup.S and is - * used only for booting. - */ - .align L1_CACHE_BYTES -ENTRY(boot_gdt) - .fill GDT_ENTRY_BOOT_CS,8,0 - .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */ - .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */ diff --git a/arch/i386/kernel/hpet_32.c b/arch/i386/kernel/hpet_32.c deleted file mode 100644 index 533d493..0000000 --- a/arch/i386/kernel/hpet_32.c +++ /dev/null @@ -1,553 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -extern struct clock_event_device *global_clock_event; - -#define HPET_MASK CLOCKSOURCE_MASK(32) -#define HPET_SHIFT 22 - -/* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 - -/* - * HPET address is set in acpi/boot.c, when an ACPI entry exists - */ -unsigned long hpet_address; -static void __iomem * hpet_virt_address; - -static inline unsigned long hpet_readl(unsigned long a) -{ - return readl(hpet_virt_address + a); -} - -static inline void hpet_writel(unsigned long d, unsigned long a) -{ - writel(d, hpet_virt_address + a); -} - -/* - * HPET command line enable / disable - */ -static int boot_hpet_disable; - -static int __init hpet_setup(char* str) -{ - if (str) { - if (!strncmp("disable", str, 7)) - boot_hpet_disable = 1; - } - return 1; -} -__setup("hpet=", hpet_setup); - -static inline int is_hpet_capable(void) -{ - return (!boot_hpet_disable && hpet_address); -} - -/* - * HPET timer interrupt enable / disable - */ -static int hpet_legacy_int_enabled; - -/** - * is_hpet_enabled - check whether the hpet timer interrupt is enabled - */ -int is_hpet_enabled(void) -{ - return is_hpet_capable() && hpet_legacy_int_enabled; -} - -/* - * When the hpet driver (/dev/hpet) is enabled, we need to reserve - * timer 0 and timer 1 in case of RTC emulation. - */ -#ifdef CONFIG_HPET -static void hpet_reserve_platform_timers(unsigned long id) -{ - struct hpet __iomem *hpet = hpet_virt_address; - struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; - unsigned int nrtimers, i; - struct hpet_data hd; - - nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; - - memset(&hd, 0, sizeof (hd)); - hd.hd_phys_address = hpet_address; - hd.hd_address = hpet_virt_address; - hd.hd_nirqs = nrtimers; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); - -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - - for (i = 2; i < nrtimers; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - hpet_alloc(&hd); - -} -#else -static void hpet_reserve_platform_timers(unsigned long id) { } -#endif - -/* - * Common hpet info - */ -static unsigned long hpet_period; - -static void hpet_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt); -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt); - -/* - * The hpet clock event device - */ -static struct clock_event_device hpet_clockevent = { - .name = "hpet", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = hpet_set_mode, - .set_next_event = hpet_next_event, - .shift = 32, - .irq = 0, -}; - -static void hpet_start_counter(void) -{ - unsigned long cfg = hpet_readl(HPET_CFG); - - cfg &= ~HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); -} - -static void hpet_enable_int(void) -{ - unsigned long cfg = hpet_readl(HPET_CFG); - - cfg |= HPET_CFG_LEGACY; - hpet_writel(cfg, HPET_CFG); - hpet_legacy_int_enabled = 1; -} - -static void hpet_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long cfg, cmp, now; - uint64_t delta; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; - delta >>= hpet_clockevent.shift; - now = hpet_readl(HPET_COUNTER); - cmp = now + (unsigned long) delta; - cfg = hpet_readl(HPET_T0_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | - HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - /* - * The first write after writing TN_SETVAL to the - * config register sets the counter value, the second - * write sets the period. - */ - hpet_writel(cmp, HPET_T0_CMP); - udelay(1); - hpet_writel((unsigned long) delta, HPET_T0_CMP); - break; - - case CLOCK_EVT_MODE_ONESHOT: - cfg = hpet_readl(HPET_T0_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - cfg = hpet_readl(HPET_T0_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T0_CFG); - break; - - case CLOCK_EVT_MODE_RESUME: - hpet_enable_int(); - break; - } -} - -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - unsigned long cnt; - - cnt = hpet_readl(HPET_COUNTER); - cnt += delta; - hpet_writel(cnt, HPET_T0_CMP); - - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; -} - -/* - * Clock source related code - */ -static cycle_t read_hpet(void) -{ - return (cycle_t)hpet_readl(HPET_COUNTER); -} - -static struct clocksource clocksource_hpet = { - .name = "hpet", - .rating = 250, - .read = read_hpet, - .mask = HPET_MASK, - .shift = HPET_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = hpet_start_counter, -}; - -/* - * Try to setup the HPET timer - */ -int __init hpet_enable(void) -{ - unsigned long id; - uint64_t hpet_freq; - u64 tmp, start, now; - cycle_t t1; - - if (!is_hpet_capable()) - return 0; - - hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - - /* - * Read the period and check for a sane value: - */ - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) - goto out_nohpet; - - /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. - */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, 32); - /* Calculate the min / max delta */ - hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); - - /* - * Read the HPET ID register to retrieve the IRQ routing - * information and the number of channels - */ - id = hpet_readl(HPET_ID); - -#ifdef CONFIG_HPET_EMULATE_RTC - /* - * The legacy routing mode needs at least two channels, tick timer - * and the rtc emulation channel. - */ - if (!(id & HPET_ID_NUMBER)) - goto out_nohpet; -#endif - - /* Start the counter */ - hpet_start_counter(); - - /* Verify whether hpet counter works */ - t1 = read_hpet(); - rdtscll(start); - - /* - * We don't know the TSC frequency yet, but waiting for - * 200000 TSC cycles is safe: - * 4 GHz == 50us - * 1 GHz == 200us - */ - do { - rep_nop(); - rdtscll(now); - } while ((now - start) < 200000UL); - - if (t1 == read_hpet()) { - printk(KERN_WARNING - "HPET counter not counting. HPET disabled\n"); - goto out_nohpet; - } - - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult - */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; - - clocksource_register(&clocksource_hpet); - - if (id & HPET_ID_LEGSUP) { - hpet_enable_int(); - hpet_reserve_platform_timers(id); - /* - * Start hpet with the boot cpu mask and make it - * global after the IO_APIC has been initialized. - */ - hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); - clockevents_register_device(&hpet_clockevent); - global_clock_event = &hpet_clockevent; - return 1; - } - return 0; - -out_nohpet: - iounmap(hpet_virt_address); - hpet_virt_address = NULL; - boot_hpet_disable = 1; - return 0; -} - - -#ifdef CONFIG_HPET_EMULATE_RTC - -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include -#include - -#define DEFAULT_RTC_INT_FREQ 64 -#define DEFAULT_RTC_SHIFT 6 -#define RTC_NUM_INTS 1 - -static unsigned long hpet_rtc_flags; -static unsigned long hpet_prev_update_sec; -static struct rtc_time hpet_alarm_time; -static unsigned long hpet_pie_count; -static unsigned long hpet_t1_cmp; -static unsigned long hpet_default_delta; -static unsigned long hpet_pie_delta; -static unsigned long hpet_pie_limit; - -/* - * Timer 1 for RTC emulation. We use one shot mode, as periodic mode - * is not supported by all HPET implementations for timer 1. - * - * hpet_rtc_timer_init() is called when the rtc is initialized. - */ -int hpet_rtc_timer_init(void) -{ - unsigned long cfg, cnt, delta, flags; - - if (!is_hpet_enabled()) - return 0; - - if (!hpet_default_delta) { - uint64_t clc; - - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; - clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; - hpet_default_delta = (unsigned long) clc; - } - - if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) - delta = hpet_default_delta; - else - delta = hpet_pie_delta; - - local_irq_save(flags); - - cnt = delta + hpet_readl(HPET_COUNTER); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - hpet_rtc_flags &= ~bit_mask; - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - unsigned long oldbits = hpet_rtc_flags; - - if (!is_hpet_enabled()) - return 0; - - hpet_rtc_flags |= bit_mask; - - if (!oldbits) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, - unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - hpet_alarm_time.tm_hour = hrs; - hpet_alarm_time.tm_min = min; - hpet_alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - uint64_t clc; - - if (!is_hpet_enabled()) - return 0; - - if (freq <= DEFAULT_RTC_INT_FREQ) - hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; - else { - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; - do_div(clc, freq); - clc >>= hpet_clockevent.shift; - hpet_pie_delta = (unsigned long) clc; - } - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - return is_hpet_enabled(); -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned long cfg, delta; - int lost_ints = -1; - - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) - delta = hpet_default_delta; - else - delta = hpet_pie_delta; - - /* - * Increment the comparator value until we are ahead of the - * current count. - */ - do { - hpet_t1_cmp += delta; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - lost_ints++; - } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); - - if (lost_ints) { - if (hpet_rtc_flags & RTC_PIE) - hpet_pie_count += lost_ints; - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost %d interrupts\n", - lost_ints); - } -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - - hpet_rtc_timer_reinit(); - - if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) - rtc_get_rtc_time(&curr_time); - - if (hpet_rtc_flags & RTC_UIE && - curr_time.tm_sec != hpet_prev_update_sec) { - rtc_int_flag = RTC_UF; - hpet_prev_update_sec = curr_time.tm_sec; - } - - if (hpet_rtc_flags & RTC_PIE && - ++hpet_pie_count >= hpet_pie_limit) { - rtc_int_flag |= RTC_PF; - hpet_pie_count = 0; - } - - if (hpet_rtc_flags & RTC_PIE && - (curr_time.tm_sec == hpet_alarm_time.tm_sec) && - (curr_time.tm_min == hpet_alarm_time.tm_min) && - (curr_time.tm_hour == hpet_alarm_time.tm_hour)) - rtc_int_flag |= RTC_AF; - - if (rtc_int_flag) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif diff --git a/arch/i386/kernel/i386_ksyms_32.c b/arch/i386/kernel/i386_ksyms_32.c deleted file mode 100644 index e3d4b73..0000000 --- a/arch/i386/kernel/i386_ksyms_32.c +++ /dev/null @@ -1,30 +0,0 @@ -#include -#include -#include - -EXPORT_SYMBOL(__down_failed); -EXPORT_SYMBOL(__down_failed_interruptible); -EXPORT_SYMBOL(__down_failed_trylock); -EXPORT_SYMBOL(__up_wakeup); -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy_generic); - -EXPORT_SYMBOL(__get_user_1); -EXPORT_SYMBOL(__get_user_2); -EXPORT_SYMBOL(__get_user_4); - -EXPORT_SYMBOL(__put_user_1); -EXPORT_SYMBOL(__put_user_2); -EXPORT_SYMBOL(__put_user_4); -EXPORT_SYMBOL(__put_user_8); - -EXPORT_SYMBOL(strstr); - -#ifdef CONFIG_SMP -extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); -extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); -EXPORT_SYMBOL(__write_lock_failed); -EXPORT_SYMBOL(__read_lock_failed); -#endif - -EXPORT_SYMBOL(csum_partial); diff --git a/arch/i386/kernel/i387_32.c b/arch/i386/kernel/i387_32.c deleted file mode 100644 index 6658472..0000000 --- a/arch/i386/kernel/i387_32.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * linux/arch/i386/kernel/i387.c - * - * Copyright (C) 1994 Linus Torvalds - * - * Pentium III FXSR, SSE support - * General FPU state handling cleanups - * Gareth Hughes , May 2000 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_MATH_EMULATION -#define HAVE_HWFP (boot_cpu_data.hard_math) -#else -#define HAVE_HWFP 1 -#endif - -static unsigned long mxcsr_feature_mask __read_mostly = 0xffffffff; - -void mxcsr_feature_mask_init(void) -{ - unsigned long mask = 0; - clts(); - if (cpu_has_fxsr) { - memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); - asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave)); - mask = current->thread.i387.fxsave.mxcsr_mask; - if (mask == 0) mask = 0x0000ffbf; - } - mxcsr_feature_mask &= mask; - stts(); -} - -/* - * The _current_ task is using the FPU for the first time - * so initialize it and set the mxcsr to its default - * value at reset if we support XMM instructions and then - * remeber the current task has used the FPU. - */ -void init_fpu(struct task_struct *tsk) -{ - if (cpu_has_fxsr) { - memset(&tsk->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); - tsk->thread.i387.fxsave.cwd = 0x37f; - if (cpu_has_xmm) - tsk->thread.i387.fxsave.mxcsr = 0x1f80; - } else { - memset(&tsk->thread.i387.fsave, 0, sizeof(struct i387_fsave_struct)); - tsk->thread.i387.fsave.cwd = 0xffff037fu; - tsk->thread.i387.fsave.swd = 0xffff0000u; - tsk->thread.i387.fsave.twd = 0xffffffffu; - tsk->thread.i387.fsave.fos = 0xffff0000u; - } - /* only the device not available exception or ptrace can call init_fpu */ - set_stopped_child_used_math(tsk); -} - -/* - * FPU lazy state save handling. - */ - -void kernel_fpu_begin(void) -{ - struct thread_info *thread = current_thread_info(); - - preempt_disable(); - if (thread->status & TS_USEDFPU) { - __save_init_fpu(thread->task); - return; - } - clts(); -} -EXPORT_SYMBOL_GPL(kernel_fpu_begin); - -/* - * FPU tag word conversions. - */ - -static inline unsigned short twd_i387_to_fxsr( unsigned short twd ) -{ - unsigned int tmp; /* to avoid 16 bit prefixes in the code */ - - /* Transform each pair of bits into 01 (valid) or 00 (empty) */ - tmp = ~twd; - tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */ - /* and move the valid bits to the lower byte. */ - tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */ - tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */ - tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */ - return tmp; -} - -static inline unsigned long twd_fxsr_to_i387( struct i387_fxsave_struct *fxsave ) -{ - struct _fpxreg *st = NULL; - unsigned long tos = (fxsave->swd >> 11) & 7; - unsigned long twd = (unsigned long) fxsave->twd; - unsigned long tag; - unsigned long ret = 0xffff0000u; - int i; - -#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16); - - for ( i = 0 ; i < 8 ; i++ ) { - if ( twd & 0x1 ) { - st = FPREG_ADDR( fxsave, (i - tos) & 7 ); - - switch ( st->exponent & 0x7fff ) { - case 0x7fff: - tag = 2; /* Special */ - break; - case 0x0000: - if ( !st->significand[0] && - !st->significand[1] && - !st->significand[2] && - !st->significand[3] ) { - tag = 1; /* Zero */ - } else { - tag = 2; /* Special */ - } - break; - default: - if ( st->significand[3] & 0x8000 ) { - tag = 0; /* Valid */ - } else { - tag = 2; /* Special */ - } - break; - } - } else { - tag = 3; /* Empty */ - } - ret |= (tag << (2 * i)); - twd = twd >> 1; - } - return ret; -} - -/* - * FPU state interaction. - */ - -unsigned short get_fpu_cwd( struct task_struct *tsk ) -{ - if ( cpu_has_fxsr ) { - return tsk->thread.i387.fxsave.cwd; - } else { - return (unsigned short)tsk->thread.i387.fsave.cwd; - } -} - -unsigned short get_fpu_swd( struct task_struct *tsk ) -{ - if ( cpu_has_fxsr ) { - return tsk->thread.i387.fxsave.swd; - } else { - return (unsigned short)tsk->thread.i387.fsave.swd; - } -} - -#if 0 -unsigned short get_fpu_twd( struct task_struct *tsk ) -{ - if ( cpu_has_fxsr ) { - return tsk->thread.i387.fxsave.twd; - } else { - return (unsigned short)tsk->thread.i387.fsave.twd; - } -} -#endif /* 0 */ - -unsigned short get_fpu_mxcsr( struct task_struct *tsk ) -{ - if ( cpu_has_xmm ) { - return tsk->thread.i387.fxsave.mxcsr; - } else { - return 0x1f80; - } -} - -#if 0 - -void set_fpu_cwd( struct task_struct *tsk, unsigned short cwd ) -{ - if ( cpu_has_fxsr ) { - tsk->thread.i387.fxsave.cwd = cwd; - } else { - tsk->thread.i387.fsave.cwd = ((long)cwd | 0xffff0000u); - } -} - -void set_fpu_swd( struct task_struct *tsk, unsigned short swd ) -{ - if ( cpu_has_fxsr ) { - tsk->thread.i387.fxsave.swd = swd; - } else { - tsk->thread.i387.fsave.swd = ((long)swd | 0xffff0000u); - } -} - -void set_fpu_twd( struct task_struct *tsk, unsigned short twd ) -{ - if ( cpu_has_fxsr ) { - tsk->thread.i387.fxsave.twd = twd_i387_to_fxsr(twd); - } else { - tsk->thread.i387.fsave.twd = ((long)twd | 0xffff0000u); - } -} - -#endif /* 0 */ - -/* - * FXSR floating point environment conversions. - */ - -static int convert_fxsr_to_user( struct _fpstate __user *buf, - struct i387_fxsave_struct *fxsave ) -{ - unsigned long env[7]; - struct _fpreg __user *to; - struct _fpxreg *from; - int i; - - env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul; - env[1] = (unsigned long)fxsave->swd | 0xffff0000ul; - env[2] = twd_fxsr_to_i387(fxsave); - env[3] = fxsave->fip; - env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16); - env[5] = fxsave->foo; - env[6] = fxsave->fos; - - if ( __copy_to_user( buf, env, 7 * sizeof(unsigned long) ) ) - return 1; - - to = &buf->_st[0]; - from = (struct _fpxreg *) &fxsave->st_space[0]; - for ( i = 0 ; i < 8 ; i++, to++, from++ ) { - unsigned long __user *t = (unsigned long __user *)to; - unsigned long *f = (unsigned long *)from; - - if (__put_user(*f, t) || - __put_user(*(f + 1), t + 1) || - __put_user(from->exponent, &to->exponent)) - return 1; - } - return 0; -} - -static int convert_fxsr_from_user( struct i387_fxsave_struct *fxsave, - struct _fpstate __user *buf ) -{ - unsigned long env[7]; - struct _fpxreg *to; - struct _fpreg __user *from; - int i; - - if ( __copy_from_user( env, buf, 7 * sizeof(long) ) ) - return 1; - - fxsave->cwd = (unsigned short)(env[0] & 0xffff); - fxsave->swd = (unsigned short)(env[1] & 0xffff); - fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff)); - fxsave->fip = env[3]; - fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16); - fxsave->fcs = (env[4] & 0xffff); - fxsave->foo = env[5]; - fxsave->fos = env[6]; - - to = (struct _fpxreg *) &fxsave->st_space[0]; - from = &buf->_st[0]; - for ( i = 0 ; i < 8 ; i++, to++, from++ ) { - unsigned long *t = (unsigned long *)to; - unsigned long __user *f = (unsigned long __user *)from; - - if (__get_user(*t, f) || - __get_user(*(t + 1), f + 1) || - __get_user(to->exponent, &from->exponent)) - return 1; - } - return 0; -} - -/* - * Signal frame handlers. - */ - -static inline int save_i387_fsave( struct _fpstate __user *buf ) -{ - struct task_struct *tsk = current; - - unlazy_fpu( tsk ); - tsk->thread.i387.fsave.status = tsk->thread.i387.fsave.swd; - if ( __copy_to_user( buf, &tsk->thread.i387.fsave, - sizeof(struct i387_fsave_struct) ) ) - return -1; - return 1; -} - -static int save_i387_fxsave( struct _fpstate __user *buf ) -{ - struct task_struct *tsk = current; - int err = 0; - - unlazy_fpu( tsk ); - - if ( convert_fxsr_to_user( buf, &tsk->thread.i387.fxsave ) ) - return -1; - - err |= __put_user( tsk->thread.i387.fxsave.swd, &buf->status ); - err |= __put_user( X86_FXSR_MAGIC, &buf->magic ); - if ( err ) - return -1; - - if ( __copy_to_user( &buf->_fxsr_env[0], &tsk->thread.i387.fxsave, - sizeof(struct i387_fxsave_struct) ) ) - return -1; - return 1; -} - -int save_i387( struct _fpstate __user *buf ) -{ - if ( !used_math() ) - return 0; - - /* This will cause a "finit" to be triggered by the next - * attempted FPU operation by the 'current' process. - */ - clear_used_math(); - - if ( HAVE_HWFP ) { - if ( cpu_has_fxsr ) { - return save_i387_fxsave( buf ); - } else { - return save_i387_fsave( buf ); - } - } else { - return save_i387_soft( ¤t->thread.i387.soft, buf ); - } -} - -static inline int restore_i387_fsave( struct _fpstate __user *buf ) -{ - struct task_struct *tsk = current; - clear_fpu( tsk ); - return __copy_from_user( &tsk->thread.i387.fsave, buf, - sizeof(struct i387_fsave_struct) ); -} - -static int restore_i387_fxsave( struct _fpstate __user *buf ) -{ - int err; - struct task_struct *tsk = current; - clear_fpu( tsk ); - err = __copy_from_user( &tsk->thread.i387.fxsave, &buf->_fxsr_env[0], - sizeof(struct i387_fxsave_struct) ); - /* mxcsr reserved bits must be masked to zero for security reasons */ - tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; - return err ? 1 : convert_fxsr_from_user( &tsk->thread.i387.fxsave, buf ); -} - -int restore_i387( struct _fpstate __user *buf ) -{ - int err; - - if ( HAVE_HWFP ) { - if ( cpu_has_fxsr ) { - err = restore_i387_fxsave( buf ); - } else { - err = restore_i387_fsave( buf ); - } - } else { - err = restore_i387_soft( ¤t->thread.i387.soft, buf ); - } - set_used_math(); - return err; -} - -/* - * ptrace request handlers. - */ - -static inline int get_fpregs_fsave( struct user_i387_struct __user *buf, - struct task_struct *tsk ) -{ - return __copy_to_user( buf, &tsk->thread.i387.fsave, - sizeof(struct user_i387_struct) ); -} - -static inline int get_fpregs_fxsave( struct user_i387_struct __user *buf, - struct task_struct *tsk ) -{ - return convert_fxsr_to_user( (struct _fpstate __user *)buf, - &tsk->thread.i387.fxsave ); -} - -int get_fpregs( struct user_i387_struct __user *buf, struct task_struct *tsk ) -{ - if ( HAVE_HWFP ) { - if ( cpu_has_fxsr ) { - return get_fpregs_fxsave( buf, tsk ); - } else { - return get_fpregs_fsave( buf, tsk ); - } - } else { - return save_i387_soft( &tsk->thread.i387.soft, - (struct _fpstate __user *)buf ); - } -} - -static inline int set_fpregs_fsave( struct task_struct *tsk, - struct user_i387_struct __user *buf ) -{ - return __copy_from_user( &tsk->thread.i387.fsave, buf, - sizeof(struct user_i387_struct) ); -} - -static inline int set_fpregs_fxsave( struct task_struct *tsk, - struct user_i387_struct __user *buf ) -{ - return convert_fxsr_from_user( &tsk->thread.i387.fxsave, - (struct _fpstate __user *)buf ); -} - -int set_fpregs( struct task_struct *tsk, struct user_i387_struct __user *buf ) -{ - if ( HAVE_HWFP ) { - if ( cpu_has_fxsr ) { - return set_fpregs_fxsave( tsk, buf ); - } else { - return set_fpregs_fsave( tsk, buf ); - } - } else { - return restore_i387_soft( &tsk->thread.i387.soft, - (struct _fpstate __user *)buf ); - } -} - -int get_fpxregs( struct user_fxsr_struct __user *buf, struct task_struct *tsk ) -{ - if ( cpu_has_fxsr ) { - if (__copy_to_user( buf, &tsk->thread.i387.fxsave, - sizeof(struct user_fxsr_struct) )) - return -EFAULT; - return 0; - } else { - return -EIO; - } -} - -int set_fpxregs( struct task_struct *tsk, struct user_fxsr_struct __user *buf ) -{ - int ret = 0; - - if ( cpu_has_fxsr ) { - if (__copy_from_user( &tsk->thread.i387.fxsave, buf, - sizeof(struct user_fxsr_struct) )) - ret = -EFAULT; - /* mxcsr reserved bits must be masked to zero for security reasons */ - tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; - } else { - ret = -EIO; - } - return ret; -} - -/* - * FPU state for core dumps. - */ - -static inline void copy_fpu_fsave( struct task_struct *tsk, - struct user_i387_struct *fpu ) -{ - memcpy( fpu, &tsk->thread.i387.fsave, - sizeof(struct user_i387_struct) ); -} - -static inline void copy_fpu_fxsave( struct task_struct *tsk, - struct user_i387_struct *fpu ) -{ - unsigned short *to; - unsigned short *from; - int i; - - memcpy( fpu, &tsk->thread.i387.fxsave, 7 * sizeof(long) ); - - to = (unsigned short *)&fpu->st_space[0]; - from = (unsigned short *)&tsk->thread.i387.fxsave.st_space[0]; - for ( i = 0 ; i < 8 ; i++, to += 5, from += 8 ) { - memcpy( to, from, 5 * sizeof(unsigned short) ); - } -} - -int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu ) -{ - int fpvalid; - struct task_struct *tsk = current; - - fpvalid = !!used_math(); - if ( fpvalid ) { - unlazy_fpu( tsk ); - if ( cpu_has_fxsr ) { - copy_fpu_fxsave( tsk, fpu ); - } else { - copy_fpu_fsave( tsk, fpu ); - } - } - - return fpvalid; -} -EXPORT_SYMBOL(dump_fpu); - -int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu) -{ - int fpvalid = !!tsk_used_math(tsk); - - if (fpvalid) { - if (tsk == current) - unlazy_fpu(tsk); - if (cpu_has_fxsr) - copy_fpu_fxsave(tsk, fpu); - else - copy_fpu_fsave(tsk, fpu); - } - return fpvalid; -} - -int dump_task_extended_fpu(struct task_struct *tsk, struct user_fxsr_struct *fpu) -{ - int fpvalid = tsk_used_math(tsk) && cpu_has_fxsr; - - if (fpvalid) { - if (tsk == current) - unlazy_fpu(tsk); - memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(*fpu)); - } - return fpvalid; -} diff --git a/arch/i386/kernel/i8237.c b/arch/i386/kernel/i8237.c deleted file mode 100644 index 6f508e8..0000000 --- a/arch/i386/kernel/i8237.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * i8237.c: 8237A DMA controller suspend functions. - * - * Written by Pierre Ossman, 2005. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include -#include - -#include - -/* - * This module just handles suspend/resume issues with the - * 8237A DMA controller (used for ISA and LPC). - * Allocation is handled in kernel/dma.c and normal usage is - * in asm/dma.h. - */ - -static int i8237A_resume(struct sys_device *dev) -{ - unsigned long flags; - int i; - - flags = claim_dma_lock(); - - dma_outb(DMA1_RESET_REG, 0); - dma_outb(DMA2_RESET_REG, 0); - - for (i = 0;i < 8;i++) { - set_dma_addr(i, 0x000000); - /* DMA count is a bit weird so this is not 0 */ - set_dma_count(i, 1); - } - - /* Enable cascade DMA or channel 0-3 won't work */ - enable_dma(4); - - release_dma_lock(flags); - - return 0; -} - -static int i8237A_suspend(struct sys_device *dev, pm_message_t state) -{ - return 0; -} - -static struct sysdev_class i8237_sysdev_class = { - set_kset_name("i8237"), - .suspend = i8237A_suspend, - .resume = i8237A_resume, -}; - -static struct sys_device device_i8237A = { - .id = 0, - .cls = &i8237_sysdev_class, -}; - -static int __init i8237A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8237_sysdev_class); - if (!error) - error = sysdev_register(&device_i8237A); - return error; -} - -device_initcall(i8237A_init_sysfs); diff --git a/arch/i386/kernel/i8253_32.c b/arch/i386/kernel/i8253_32.c deleted file mode 100644 index 6d839f2..0000000 --- a/arch/i386/kernel/i8253_32.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * i8253.c 8253/PIT functions - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); - -/* - * HPET replaces the PIT, when enabled. So we need to know, which of - * the two timers is used - */ -struct clock_event_device *global_clock_event; - -/* - * Initialize the PIT timer. - * - * This is also called after resume to bring the PIT into operation again. - */ -static void init_pit_timer(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* binary, mode 2, LSB/MSB, ch 0 */ - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - outb(LATCH >> 8 , PIT_CH0); /* MSB */ - break; - - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - if (evt->mode == CLOCK_EVT_MODE_PERIODIC || - evt->mode == CLOCK_EVT_MODE_ONESHOT) { - outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); - } - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* One shot setup */ - outb_p(0x38, PIT_MODE); - break; - - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do here */ - break; - } - spin_unlock_irqrestore(&i8253_lock, flags); -} - -/* - * Program the next event in oneshot mode - * - * Delta is given in PIT ticks - */ -static int pit_next_event(unsigned long delta, struct clock_event_device *evt) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(delta & 0xff , PIT_CH0); /* LSB */ - outb(delta >> 8 , PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); - - return 0; -} - -/* - * On UP the PIT can serve all of the possible timer functions. On SMP systems - * it can be solely used for the global tick. - * - * The profiling and update capabilites are switched off once the local apic is - * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - - * !using_apic_timer decisions in do_timer_interrupt_hook() - */ -struct clock_event_device pit_clockevent = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = init_pit_timer, - .set_next_event = pit_next_event, - .shift = 32, - .irq = 0, -}; - -/* - * Initialize the conversion factor and the min/max deltas of the clock event - * structure and register the clock event source with the framework. - */ -void __init setup_pit_timer(void) -{ - /* - * Start pit with the boot cpu mask and make it global after the - * IO_APIC has been initialized. - */ - pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); - pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); - pit_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFF, &pit_clockevent); - pit_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &pit_clockevent); - clockevents_register_device(&pit_clockevent); - global_clock_event = &pit_clockevent; -} - -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(void) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) { - count = old_count; - } - old_count = count; - old_jifs = jifs; - - spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource clocksource_pit = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - -static int __init init_pit_clocksource(void) -{ - if (num_possible_cpus() > 1) /* PIT does not scale! */ - return 0; - - clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); - return clocksource_register(&clocksource_pit); -} -arch_initcall(init_pit_clocksource); diff --git a/arch/i386/kernel/i8259_32.c b/arch/i386/kernel/i8259_32.c deleted file mode 100644 index 0499cbe..0000000 --- a/arch/i386/kernel/i8259_32.c +++ /dev/null @@ -1,420 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - set_kset_name("i8259"), - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_p - this has to work on a wide range of PC hardware. - */ - outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->eip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL }; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - if (vector != SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/i386/kernel/init_task_32.c b/arch/i386/kernel/init_task_32.c deleted file mode 100644 index d26fc06..0000000 --- a/arch/i386/kernel/init_task_32.c +++ /dev/null @@ -1,46 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); - -EXPORT_SYMBOL(init_mm); - -/* - * Initial thread structure. - * - * We need to make sure that this is THREAD_SIZE aligned due to the - * way process stacks are handled. This is done by having a special - * "init_task" linker map entry.. - */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = - { INIT_THREAD_INFO(init_task) }; - -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -struct task_struct init_task = INIT_TASK(init_task); - -EXPORT_SYMBOL(init_task); - -/* - * per-CPU TSS segments. Threads are completely 'soft' on Linux, - * no more per-task TSS's. - */ -DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS; - diff --git a/arch/i386/kernel/io_apic_32.c b/arch/i386/kernel/io_apic_32.c deleted file mode 100644 index e2f4a1c..0000000 --- a/arch/i386/kernel/io_apic_32.c +++ /dev/null @@ -1,2847 +0,0 @@ -/* - * Intel IO-APIC support for multi-Pentium hosts. - * - * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo - * - * Many thanks to Stig Venaas for trying out countless experimental - * patches and reporting/debugging problems patiently! - * - * (c) 1999, Multiple IO-APIC support, developed by - * Ken-ichi Yaku and - * Hidemi Kishimoto , - * further tested and cleaned up by Zach Brown - * and Ingo Molnar - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively - * Paul Diefenbaugh : Added full ACPI support - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "io_ports.h" - -int (*ioapic_renumber_irq)(int ioapic, int irq); -atomic_t irq_mis_count; - -/* Where if anywhere is the i8259 connect in external int mode */ -static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; - -static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); - -int timer_over_8254 __initdata = 1; - -/* - * Is the SiS APIC rmw bug present ? - * -1 = don't know, 0 = no, 1 = yes - */ -int sis_apic_bug = -1; - -/* - * # of IRQ routing registers - */ -int nr_ioapic_registers[MAX_IO_APICS]; - -static int disable_timer_pin_1 __initdata; - -/* - * Rough estimation of how many shared IRQs there are, can - * be changed anytime. - */ -#define MAX_PLUS_SHARED_IRQS NR_IRQS -#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) - -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - -static struct irq_pin_list { - int apic, pin, next; -} irq_2_pin[PIN_MAP_SIZE]; - -struct io_apic { - unsigned int index; - unsigned int unused[3]; - unsigned int data; -}; - -static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) -{ - return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); -} - -static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - return readl(&io_apic->data); -} - -static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - writel(value, &io_apic->data); -} - -/* - * Re-write a value: to be used for read-modify-write - * cycles where the read already set up the index register. - * - * Older SiS APIC requires we rewrite the index register - */ -static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) -{ - volatile struct io_apic __iomem *io_apic = io_apic_base(apic); - if (sis_apic_bug) - writel(reg, &io_apic->index); - writel(value, &io_apic->data); -} - -union entry_union { - struct { u32 w1, w2; }; - struct IO_APIC_route_entry entry; -}; - -static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) -{ - union entry_union eu; - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - return eu.entry; -} - -/* - * When we write a new IO APIC routing entry, we need to write the high - * word first! If the mask bit in the low word is clear, we will enable - * the interrupt, and we need to make sure the entry is fully populated - * before that happens. - */ -static void -__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - union entry_union eu; - eu.entry = e; - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); -} - -static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(apic, pin, e); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -/* - * When we mask an IO APIC routing entry, we need to write the low - * word first, in order to set the mask bit before we change the - * high bits! - */ -static void ioapic_mask_entry(int apic, int pin) -{ - unsigned long flags; - union entry_union eu = { .entry.mask = 1 }; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -/* - * The common case is 1:1 IRQ<->pin mappings. Sometimes there are - * shared ISA-space IRQs, so we have to support them. We are super - * fast in the common case, and fast for shared ISA-space IRQs. - */ -static void add_pin_to_irq(unsigned int irq, int apic, int pin) -{ - static int first_free_entry = NR_IRQS; - struct irq_pin_list *entry = irq_2_pin + irq; - - while (entry->next) - entry = irq_2_pin + entry->next; - - if (entry->pin != -1) { - entry->next = first_free_entry; - entry = irq_2_pin + entry->next; - if (++first_free_entry >= PIN_MAP_SIZE) - panic("io_apic.c: whoops"); - } - entry->apic = apic; - entry->pin = pin; -} - -/* - * Reroute an IRQ to a different pin. - */ -static void __init replace_pin_at_irq(unsigned int irq, - int oldapic, int oldpin, - int newapic, int newpin) -{ - struct irq_pin_list *entry = irq_2_pin + irq; - - while (1) { - if (entry->apic == oldapic && entry->pin == oldpin) { - entry->apic = newapic; - entry->pin = newpin; - } - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } -} - -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) -{ - struct irq_pin_list *entry = irq_2_pin + irq; - unsigned int pin, reg; - - for (;;) { - pin = entry->pin; - if (pin == -1) - break; - reg = io_apic_read(entry->apic, 0x10 + pin*2); - reg &= ~disable; - reg |= enable; - io_apic_modify(entry->apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } -} - -/* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) -{ - __modify_IO_APIC_irq(irq, 0x00010000, 0); -} - -/* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) -{ - __modify_IO_APIC_irq(irq, 0, 0x00010000); -} - -/* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) -{ - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); -} - -/* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) -{ - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); -} - -static void mask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __mask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void unmask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) -{ - struct IO_APIC_route_entry entry; - - /* Check delivery_mode to be sure we're not clearing an SMI pin */ - entry = ioapic_read_entry(apic, pin); - if (entry.delivery_mode == dest_SMI) - return; - - /* - * Disable it in the IO-APIC irq-routing table: - */ - ioapic_mask_entry(apic, pin); -} - -static void clear_IO_APIC (void) -{ - int apic, pin; - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - clear_IO_APIC_pin(apic, pin); -} - -#ifdef CONFIG_SMP -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) -{ - unsigned long flags; - int pin; - struct irq_pin_list *entry = irq_2_pin + irq; - unsigned int apicid_value; - cpumask_t tmp; - - cpus_and(tmp, cpumask, cpu_online_map); - if (cpus_empty(tmp)) - tmp = TARGET_CPUS; - - cpus_and(cpumask, tmp, CPU_MASK_ALL); - - apicid_value = cpu_mask_to_apicid(cpumask); - /* Prepare to do the io_apic_write */ - apicid_value = apicid_value << 24; - spin_lock_irqsave(&ioapic_lock, flags); - for (;;) { - pin = entry->pin; - if (pin == -1) - break; - io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } - irq_desc[irq].affinity = cpumask; - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -#if defined(CONFIG_IRQBALANCE) -# include /* kernel_thread() */ -# include /* kstat */ -# include /* kmalloc() */ -# include /* time_after() */ - -#define IRQBALANCE_CHECK_ARCH -999 -#define MAX_BALANCED_IRQ_INTERVAL (5*HZ) -#define MIN_BALANCED_IRQ_INTERVAL (HZ/2) -#define BALANCED_IRQ_MORE_DELTA (HZ/10) -#define BALANCED_IRQ_LESS_DELTA (HZ) - -static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH; -static int physical_balance __read_mostly; -static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; - -static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; - unsigned long irq; -} irq_cpu_data[NR_CPUS]; - -#define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) - -#define IDLE_ENOUGH(cpu,now) \ - (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) - -#define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) - -#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) - -static cpumask_t balance_irq_affinity[NR_IRQS] = { - [0 ... NR_IRQS-1] = CPU_MASK_ALL -}; - -void set_balance_irq_affinity(unsigned int irq, cpumask_t mask) -{ - balance_irq_affinity[irq] = mask; -} - -static unsigned long move(int curr_cpu, cpumask_t allowed_mask, - unsigned long now, int direction) -{ - int search_idle = 1; - int cpu = curr_cpu; - - goto inside; - - do { - if (unlikely(cpu == curr_cpu)) - search_idle = 0; -inside: - if (direction == 1) { - cpu++; - if (cpu >= NR_CPUS) - cpu = 0; - } else { - cpu--; - if (cpu == -1) - cpu = NR_CPUS-1; - } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); - - return cpu; -} - -static inline void balance_irq(int cpu, int irq) -{ - unsigned long now = jiffies; - cpumask_t allowed_mask; - unsigned int new_cpu; - - if (irqbalance_disabled) - return; - - cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); - new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { - set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } -} - -static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) -{ - int i, j; - - for_each_online_cpu(i) { - for (j = 0; j < NR_IRQS; j++) { - if (!irq_desc[j].action) - continue; - /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < - useful_load_threshold) - continue; - balance_irq(i, j); - } - } - balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); - return; -} - -static void do_irq_balance(void) -{ - int i, j; - unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); - unsigned long move_this_load = 0; - int max_loaded = 0, min_loaded = 0; - int load; - unsigned long useful_load_threshold = balanced_irq_interval + 10; - int selected_irq; - int tmp_loaded, first_attempt = 1; - unsigned long tmp_cpu_irq; - unsigned long imbalance = 0; - cpumask_t allowed_mask, target_cpu_mask, tmp; - - for_each_possible_cpu(i) { - int package_index; - CPU_IRQ(i) = 0; - if (!cpu_online(i)) - continue; - package_index = CPU_TO_PACKAGEINDEX(i); - for (j = 0; j < NR_IRQS; j++) { - unsigned long value_now, delta; - /* Is this an active IRQ or balancing disabled ? */ - if (!irq_desc[j].action || irq_balancing_disabled(j)) - continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; - /* Determine the total count per processor per IRQ */ - value_now = (unsigned long) kstat_cpu(i).irqs[j]; - - /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); - - /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; - - /* Ignore IRQs whose rate is less than the clock */ - if (delta < useful_load_threshold) - continue; - /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; - - /* Keep track of the higher numbered sibling as well */ - if (i != package_index) - CPU_IRQ(i) += delta; - /* - * We have sibling A and sibling B in the package - * - * cpu_irq[A] = load for cpu A + load for cpu B - * cpu_irq[B] = load for cpu B - */ - CPU_IRQ(package_index) += delta; - } - } - /* Find the least loaded processor package */ - for_each_online_cpu(i) { - if (i != CPU_TO_PACKAGEINDEX(i)) - continue; - if (min_cpu_irq > CPU_IRQ(i)) { - min_cpu_irq = CPU_IRQ(i); - min_loaded = i; - } - } - max_cpu_irq = ULONG_MAX; - -tryanothercpu: - /* Look for heaviest loaded processor. - * We may come back to get the next heaviest loaded processor. - * Skip processors with trivial loads. - */ - tmp_cpu_irq = 0; - tmp_loaded = -1; - for_each_online_cpu(i) { - if (i != CPU_TO_PACKAGEINDEX(i)) - continue; - if (max_cpu_irq <= CPU_IRQ(i)) - continue; - if (tmp_cpu_irq < CPU_IRQ(i)) { - tmp_cpu_irq = CPU_IRQ(i); - tmp_loaded = i; - } - } - - if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original - * approach to rotate them around. - */ - if (!first_attempt && imbalance >= useful_load_threshold) { - rotate_irqs_among_cpus(useful_load_threshold); - return; - } - goto not_worth_the_effort; - } - - first_attempt = 0; /* heaviest search */ - max_cpu_irq = tmp_cpu_irq; /* load */ - max_loaded = tmp_loaded; /* processor */ - imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then - * observe diminishing returns action. - quit - */ - if (imbalance < (max_cpu_irq >> 3)) - goto not_worth_the_effort; - -tryanotherirq: - /* if we select an IRQ to move that can't go where we want, then - * see if there is another one to try. - */ - move_this_load = 0; - selected_irq = -1; - for (j = 0; j < NR_IRQS; j++) { - /* Is this an active IRQ? */ - if (!irq_desc[j].action) - continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) - continue; - /* Try to find the IRQ that is closest to the imbalance - * without going over. - */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); - selected_irq = j; - } - } - if (selected_irq == -1) { - goto tryanothercpu; - } - - imbalance = move_this_load; - - /* For physical_balance case, we accumlated both load - * values in the one of the siblings cpu_irq[], - * to use the same code for physical and logical processors - * as much as possible. - * - * NOTE: the cpu_irq[] array holds the sum of the load for - * sibling A and sibling B in the slot for the lowest numbered - * sibling (A), _AND_ the load for sibling B in the slot for - * the higher numbered sibling. - * - * We seek the least loaded sibling by making the comparison - * (A+B)/2 vs B - */ - load = CPU_IRQ(min_loaded) >> 1; - for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { - if (load > CPU_IRQ(j)) { - /* This won't change cpu_sibling_map[min_loaded] */ - load = CPU_IRQ(j); - min_loaded = j; - } - } - - cpus_and(allowed_mask, - cpu_online_map, - balance_irq_affinity[selected_irq]); - target_cpu_mask = cpumask_of_cpu(min_loaded); - cpus_and(tmp, target_cpu_mask, allowed_mask); - - if (!cpus_empty(tmp)) { - /* mark for change destination */ - set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - - /* Since we made a change, come back sooner to - * check for more variation. - */ - balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); - return; - } - goto tryanotherirq; - -not_worth_the_effort: - /* - * if we did not find an IRQ to move, then adjust the time interval - * upward - */ - balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); - return; -} - -static int balanced_irq(void *unused) -{ - int i; - unsigned long prev_balance_time = jiffies; - long time_remaining = balanced_irq_interval; - - /* push everything to CPU 0 to give us a starting point. */ - for (i = 0 ; i < NR_IRQS ; i++) { - irq_desc[i].pending_mask = cpumask_of_cpu(0); - set_pending_irq(i, cpumask_of_cpu(0)); - } - - set_freezable(); - for ( ; ; ) { - time_remaining = schedule_timeout_interruptible(time_remaining); - try_to_freeze(); - if (time_after(jiffies, - prev_balance_time+balanced_irq_interval)) { - preempt_disable(); - do_irq_balance(); - prev_balance_time = jiffies; - time_remaining = balanced_irq_interval; - preempt_enable(); - } - } - return 0; -} - -static int __init balanced_irq_init(void) -{ - int i; - struct cpuinfo_x86 *c; - cpumask_t tmp; - - cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; - /* When not overwritten by the command line ask subarchitecture. */ - if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) - irqbalance_disabled = NO_BALANCE_IRQ; - if (irqbalance_disabled) - return 0; - - /* disable irqbalance completely if there is only one processor online */ - if (num_online_cpus() < 2) { - irqbalance_disabled = 1; - return 0; - } - /* - * Enable physical balance only if more than 1 physical processor - * is present - */ - if (smp_num_siblings > 1 && !cpus_empty(tmp)) - physical_balance = 1; - - for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { - printk(KERN_ERR "balanced_irq_init: out of memory"); - goto failed; - } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); - } - - printk(KERN_INFO "Starting balanced_irq\n"); - if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) - return 0; - printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); -failed: - for_each_possible_cpu(i) { - kfree(irq_cpu_data[i].irq_delta); - irq_cpu_data[i].irq_delta = NULL; - kfree(irq_cpu_data[i].last_irq); - irq_cpu_data[i].last_irq = NULL; - } - return 0; -} - -int __devinit irqbalance_disable(char *str) -{ - irqbalance_disabled = 1; - return 1; -} - -__setup("noirqbalance", irqbalance_disable); - -late_initcall(balanced_irq_init); -#endif /* CONFIG_IRQBALANCE */ -#endif /* CONFIG_SMP */ - -#ifndef CONFIG_SMP -void fastcall send_IPI_self(int vector) -{ - unsigned int cfg; - - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; - /* - * Send the IPI. The write to APIC_ICR fires this off. - */ - apic_write_around(APIC_ICR, cfg); -} -#endif /* !CONFIG_SMP */ - - -/* - * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to - * specific CPU-side IRQs. - */ - -#define MAX_PIRQS 8 -static int pirq_entries [MAX_PIRQS]; -static int pirqs_enabled; -int skip_ioapic_setup; - -static int __init ioapic_pirq_setup(char *str) -{ - int i, max; - int ints[MAX_PIRQS+1]; - - get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; - - pirqs_enabled = 1; - apic_printk(APIC_VERBOSE, KERN_INFO - "PIRQ redirection, working around broken MP-BIOS.\n"); - max = MAX_PIRQS; - if (ints[0] < MAX_PIRQS) - max = ints[0]; - - for (i = 0; i < max; i++) { - apic_printk(APIC_VERBOSE, KERN_DEBUG - "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); - /* - * PIRQs are mapped upside down, usually. - */ - pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; - } - return 1; -} - -__setup("pirq=", ioapic_pirq_setup); - -/* - * Find the IRQ entry number of a certain pin. - */ -static int find_irq_entry(int apic, int pin, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) - return i; - - return -1; -} - -/* - * Find the pin to which IRQ[irq] (ISA) is connected - */ -static int __init find_isa_irq_pin(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA - ) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - - return mp_irqs[i].mpc_dstirq; - } - return -1; -} - -static int __init find_isa_irq_apic(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA - ) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - break; - } - if (i < mp_irq_entries) { - int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) - return apic; - } - } - - return -1; -} - -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " - "slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { - printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) - break; - - if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && - !mp_irqs[i].mpc_irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - return best_guess; -} -EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); - -/* - * This function currently is only a helper for the i386 smp boot process where - * we need to reprogram the ioredtbls to cater for the cpus which have come online - * so mask in all cases should simply be TARGET_CPUS - */ -#ifdef CONFIG_SMP -void __init setup_ioapic_dest(void) -{ - int pin, ioapic, irq, irq_entry; - - if (skip_ioapic_setup == 1) - return; - - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - set_ioapic_affinity_irq(irq, TARGET_CPUS); - } - - } -} -#endif - -/* - * EISA Edge/Level control register, ELCR - */ -static int EISA_ELCR(unsigned int irq) -{ - if (irq < 16) { - unsigned int port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; - } - apic_printk(APIC_VERBOSE, KERN_INFO - "Broken MPtable reports ISA irq %d\n", irq); - return 0; -} - -/* EISA interrupts are always polarity zero and can be edge or level - * trigger depending on the ELCR value. If an interrupt is listed as - * EISA conforming in the MP table, that means its trigger type must - * be read in from the ELCR */ - -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) -#define default_EISA_polarity(idx) (0) - -/* ISA interrupts are always polarity zero edge triggered, - * when listed as conforming in the MP table. */ - -#define default_ISA_trigger(idx) (0) -#define default_ISA_polarity(idx) (0) - -/* PCI interrupts are always polarity one level triggered, - * when listed as conforming in the MP table. */ - -#define default_PCI_trigger(idx) (1) -#define default_PCI_polarity(idx) (1) - -/* MCA interrupts are always polarity zero level triggered, - * when listed as conforming in the MP table. */ - -#define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) (0) - -static int __init MPBIOS_polarity(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int polarity; - - /* - * Determine IRQ line polarity (high active or low active): - */ - switch (mp_irqs[idx].mpc_irqflag & 3) - { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - polarity = default_ISA_polarity(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - polarity = default_EISA_polarity(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - polarity = default_PCI_polarity(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - polarity = default_MCA_polarity(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } - return polarity; -} - -static int MPBIOS_trigger(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int trigger; - - /* - * Determine IRQ trigger mode (edge or level sensitive): - */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) - { - case 0: /* conforms, ie. bus-type dependent */ - { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - trigger = default_ISA_trigger(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - trigger = default_PCI_trigger(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } - break; - } - case 1: /* edge */ - { - trigger = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - case 3: /* level */ - { - trigger = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; - break; - } - } - return trigger; -} - -static inline int irq_polarity(int idx) -{ - return MPBIOS_polarity(idx); -} - -static inline int irq_trigger(int idx) -{ - return MPBIOS_trigger(idx); -} - -static int pin_2_irq(int idx, int apic, int pin) -{ - int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; - - /* - * Debugging check, we are in big trouble if this message pops up! - */ - if (mp_irqs[idx].mpc_dstirq != pin) - printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - case MP_BUS_EISA: - case MP_BUS_MCA: - { - irq = mp_irqs[idx].mpc_srcbusirq; - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - - /* - * For MPS mode, so far only needed by ES7000 platform - */ - if (ioapic_renumber_irq) - irq = ioapic_renumber_irq(apic, irq); - - break; - } - default: - { - printk(KERN_ERR "unknown bus type %d.\n",bus); - irq = 0; - break; - } - } - - /* - * PCI IRQ command line redirection. Yes, limits are hardcoded. - */ - if ((pin >= 16) && (pin <= 23)) { - if (pirq_entries[pin-16] != -1) { - if (!pirq_entries[pin-16]) { - apic_printk(APIC_VERBOSE, KERN_DEBUG - "disabling PIRQ%d\n", pin-16); - } else { - irq = pirq_entries[pin-16]; - apic_printk(APIC_VERBOSE, KERN_DEBUG - "using PIRQ%d -> IRQ %d\n", - pin-16, irq); - } - } - } - return irq; -} - -static inline int IO_APIC_irq_trigger(int irq) -{ - int apic, idx, pin; - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) - return irq_trigger(idx); - } - } - /* - * nonexistent IRQs are edge default - */ - return 0; -} - -/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; - -static int __assign_irq_vector(int irq) -{ - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; - int vector, offset, i; - - BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); - - if (irq_vector[irq] > 0) - return irq_vector[irq]; - - vector = current_vector; - offset = current_offset; -next: - vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { - offset = (offset + 1) % 8; - vector = FIRST_DEVICE_VECTOR + offset; - } - if (vector == current_vector) - return -ENOSPC; - if (vector == SYSCALL_VECTOR) - goto next; - for (i = 0; i < NR_IRQ_VECTORS; i++) - if (irq_vector[i] == vector) - goto next; - - current_vector = vector; - current_offset = offset; - irq_vector[irq] = vector; - - return vector; -} - -static int assign_irq_vector(int irq) -{ - unsigned long flags; - int vector; - - spin_lock_irqsave(&vector_lock, flags); - vector = __assign_irq_vector(irq); - spin_unlock_irqrestore(&vector_lock, flags); - - return vector; -} -static struct irq_chip ioapic_chip; - -#define IOAPIC_AUTO -1 -#define IOAPIC_EDGE 0 -#define IOAPIC_LEVEL 1 - -static void ioapic_register_intr(int irq, int vector, unsigned long trigger) -{ - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) { - irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { - irq_desc[irq].status &= ~IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_edge_irq, "edge"); - } - set_intr_gate(vector, interrupt[irq]); -} - -static void __init setup_IO_APIC_irqs(void) -{ - struct IO_APIC_route_entry entry; - int apic, pin, idx, irq, first_notcon = 1, vector; - unsigned long flags; - - apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = - cpu_mask_to_apicid(TARGET_CPUS); - - idx = find_irq_entry(apic,pin,mp_INT); - if (idx == -1) { - if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG - " IO-APIC (apicid-pin) %d-%d", - mp_ioapics[apic].mpc_apicid, - pin); - first_notcon = 0; - } else - apic_printk(APIC_VERBOSE, ", %d-%d", - mp_ioapics[apic].mpc_apicid, pin); - continue; - } - - entry.trigger = irq_trigger(idx); - entry.polarity = irq_polarity(idx); - - if (irq_trigger(idx)) { - entry.trigger = 1; - entry.mask = 1; - } - - irq = pin_2_irq(idx, apic, pin); - /* - * skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum - */ - if (multi_timer_check(apic, irq)) - continue; - else - add_pin_to_irq(irq, apic, pin); - - if (!apic && !IO_APIC_IRQ(irq)) - continue; - - if (IO_APIC_IRQ(irq)) { - vector = assign_irq_vector(irq); - entry.vector = vector; - ioapic_register_intr(irq, vector, IOAPIC_AUTO); - - if (!apic && (irq < 16)) - disable_8259A_irq(irq); - } - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(apic, pin, entry); - spin_unlock_irqrestore(&ioapic_lock, flags); - } - } - - if (!first_notcon) - apic_printk(APIC_VERBOSE, " not connected.\n"); -} - -/* - * Set up the 8259A-master output pin: - */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) -{ - struct IO_APIC_route_entry entry; - - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - - /* - * We use logical delivery to get the timer IRQ - * to the first CPU. - */ - entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.delivery_mode = INT_DELIVERY_MODE; - entry.polarity = 0; - entry.trigger = 0; - entry.vector = vector; - - /* - * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... - */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); -} - -void __init print_IO_APIC(void) -{ - int apic, i; - union IO_APIC_reg_00 reg_00; - union IO_APIC_reg_01 reg_01; - union IO_APIC_reg_02 reg_02; - union IO_APIC_reg_03 reg_03; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); - for (i = 0; i < nr_ioapics; i++) - printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); - - /* - * We are a bit conservative about what we expect. We have to - * know about every hardware change ASAP. - */ - printk(KERN_INFO "testing the IO APIC.......................\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - reg_01.raw = io_apic_read(apic, 1); - if (reg_01.bits.version >= 0x10) - reg_02.raw = io_apic_read(apic, 2); - if (reg_01.bits.version >= 0x20) - reg_03.raw = io_apic_read(apic, 3); - spin_unlock_irqrestore(&ioapic_lock, flags); - - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); - printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); - printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); - printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); - printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); - - printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); - printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); - - printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); - printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); - - /* - * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, - * but the value of reg_02 is read as the previous read register - * value, so ignore it if reg_02 == reg_01. - */ - if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { - printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); - printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); - } - - /* - * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 - * or reg_03, but the value of reg_0[23] is read as the previous read - * register value, so ignore it if reg_03 == reg_0[12]. - */ - if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && - reg_03.raw != reg_01.raw) { - printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); - printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); - } - - printk(KERN_DEBUG ".... IRQ redirection table:\n"); - - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); - - for (i = 0; i <= reg_01.bits.entries; i++) { - struct IO_APIC_route_entry entry; - - entry = ioapic_read_entry(apic, i); - - printk(KERN_DEBUG " %02x %03X %02X ", - i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest - ); - - printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", - entry.mask, - entry.trigger, - entry.irr, - entry.polarity, - entry.delivery_status, - entry.dest_mode, - entry.delivery_mode, - entry.vector - ); - } - } - printk(KERN_DEBUG "IRQ to pin mappings:\n"); - for (i = 0; i < NR_IRQS; i++) { - struct irq_pin_list *entry = irq_2_pin + i; - if (entry->pin < 0) - continue; - printk(KERN_DEBUG "IRQ%d ", i); - for (;;) { - printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } - printk("\n"); - } - - printk(KERN_INFO ".................................... done.\n"); - - return; -} - -#if 0 - -static void print_APIC_bitfield (int base) -{ - unsigned int v; - int i, j; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1< 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - v = apic_read(APIC_ESR); - printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - } - - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); - - v = apic_read(APIC_LVTT); - printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); - - if (maxlvt > 3) { /* PC is LVT#4. */ - v = apic_read(APIC_LVTPC); - printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); - } - v = apic_read(APIC_LVT0); - printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); - v = apic_read(APIC_LVT1); - printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); - - if (maxlvt > 2) { /* ERR is LVT#3. */ - v = apic_read(APIC_LVTERR); - printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); - } - - v = apic_read(APIC_TMICT); - printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); - v = apic_read(APIC_TMCCT); - printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); - v = apic_read(APIC_TDCR); - printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); - printk("\n"); -} - -void print_all_local_APICs (void) -{ - on_each_cpu(print_local_APIC, NULL, 1, 1); -} - -void /*__init*/ print_PIC(void) -{ - unsigned int v; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "\nprinting PIC contents\n"); - - spin_lock_irqsave(&i8259A_lock, flags); - - v = inb(0xa1) << 8 | inb(0x21); - printk(KERN_DEBUG "... PIC IMR: %04x\n", v); - - v = inb(0xa0) << 8 | inb(0x20); - printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - - outb(0x0b,0xa0); - outb(0x0b,0x20); - v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); - - spin_unlock_irqrestore(&i8259A_lock, flags); - - printk(KERN_DEBUG "... PIC ISR: %04x\n", v); - - v = inb(0x4d1) << 8 | inb(0x4d0); - printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); -} - -#endif /* 0 */ - -static void __init enable_IO_APIC(void) -{ - union IO_APIC_reg_01 reg_01; - int i8259_apic, i8259_pin; - int i, apic; - unsigned long flags; - - for (i = 0; i < PIN_MAP_SIZE; i++) { - irq_2_pin[i].pin = -1; - irq_2_pin[i].next = 0; - } - if (!pirqs_enabled) - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; - - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } - for(apic = 0; apic < nr_ioapics; apic++) { - int pin; - /* See if any of the pins is in ExtINT mode */ - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - struct IO_APIC_route_entry entry; - entry = ioapic_read_entry(apic, pin); - - - /* If the interrupt line is enabled and in ExtInt mode - * I have found the pin where the i8259 is connected. - */ - if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { - ioapic_i8259.apic = apic; - ioapic_i8259.pin = pin; - goto found_i8259; - } - } - } - found_i8259: - /* Look to see what if the MP table has reported the ExtINT */ - /* If we could not find the appropriate pin by looking at the ioapic - * the i8259 probably is not connected the ioapic but give the - * mptable a chance anyway. - */ - i8259_pin = find_isa_irq_pin(0, mp_ExtINT); - i8259_apic = find_isa_irq_apic(0, mp_ExtINT); - /* Trust the MP table if nothing is setup in the hardware */ - if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { - printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); - ioapic_i8259.pin = i8259_pin; - ioapic_i8259.apic = i8259_apic; - } - /* Complain if the MP table and the hardware disagree */ - if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && - (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) - { - printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); - } - - /* - * Do not trust the IO-APIC being empty at bootup - */ - clear_IO_APIC(); -} - -/* - * Not an __init, needed by the reboot code - */ -void disable_IO_APIC(void) -{ - /* - * Clear the IO-APIC before rebooting: - */ - clear_IO_APIC(); - - /* - * If the i8259 is routed through an IOAPIC - * Put that IOAPIC in virtual wire mode - * so legacy interrupts can be delivered. - */ - if (ioapic_i8259.pin != -1) { - struct IO_APIC_route_entry entry; - - memset(&entry, 0, sizeof(entry)); - entry.mask = 0; /* Enabled */ - entry.trigger = 0; /* Edge */ - entry.irr = 0; - entry.polarity = 0; /* High */ - entry.delivery_status = 0; - entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = dest_ExtINT; /* ExtInt */ - entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); - } - disconnect_bsp_APIC(ioapic_i8259.pin != -1); -} - -/* - * function to set the IO-APIC physical IDs based on the - * values stored in the MPC table. - * - * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 - */ - -#ifndef CONFIG_X86_NUMAQ -static void __init setup_ioapic_ids_from_mpc(void) -{ - union IO_APIC_reg_00 reg_00; - physid_mask_t phys_id_present_map; - int apic; - int i; - unsigned char old_id; - unsigned long flags; - - /* - * Don't check I/O APIC IDs for xAPIC systems. They have - * no meaning without the serial APIC bus. - */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return; - /* - * This is broken; anything with a real cpu count has to - * circumvent this idiocy regardless. - */ - phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); - - /* - * Set the IOAPIC ID to the value stored in the MPC table. - */ - for (apic = 0; apic < nr_ioapics; apic++) { - - /* Read the register 0 value */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mpc_apicid; - - if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { - printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mpc_apicid); - printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", - reg_00.bits.ID); - mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; - } - - /* - * Sanity check, is the ID really free? Every APIC in a - * system must have a unique ID or we get lots of nice - * 'stuck on smp_invalidate_needed IPI wait' messages. - */ - if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mpc_apicid)) { - printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mpc_apicid); - for (i = 0; i < get_physical_broadcast(); i++) - if (!physid_isset(i, phys_id_present_map)) - break; - if (i >= get_physical_broadcast()) - panic("Max APIC ID exceeded!\n"); - printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", - i); - physid_set(i, phys_id_present_map); - mp_ioapics[apic].mpc_apicid = i; - } else { - physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); - apic_printk(APIC_VERBOSE, "Setting %d in the " - "phys_id_present_map\n", - mp_ioapics[apic].mpc_apicid); - physids_or(phys_id_present_map, phys_id_present_map, tmp); - } - - - /* - * We need to adjust the IRQ routing table - * if the ID changed. - */ - if (old_id != mp_ioapics[apic].mpc_apicid) - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; - - /* - * Read the right value from the MPC table and - * write it into the ID register. - */ - apic_printk(APIC_VERBOSE, KERN_INFO - "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); - - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0, reg_00.raw); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* - * Sanity check - */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) - printk("could not set ID!\n"); - else - apic_printk(APIC_VERBOSE, " ok.\n"); - } -} -#else -static void __init setup_ioapic_ids_from_mpc(void) { } -#endif - -int no_timer_check __initdata; - -static int __init notimercheck(char *s) -{ - no_timer_check = 1; - return 1; -} -__setup("no_timer_check", notimercheck); - -/* - * There is a nasty bug in some older SMP boards, their mptable lies - * about the timer IRQ. We do the following to work around the situation: - * - * - timer IRQ defaults to IO-APIC IRQ - * - if this function detects that timer IRQs are defunct, then we fall - * back to ISA timer IRQs - */ -static int __init timer_irq_works(void) -{ - unsigned long t1 = jiffies; - - if (no_timer_check) - return 1; - - local_irq_enable(); - /* Let ten ticks pass... */ - mdelay((10 * 1000) / HZ); - - /* - * Expect a few ticks at least, to be sure some possible - * glue logic does not lock up after one or two first - * ticks in a non-ExtINT mode. Also the local APIC - * might have cached one ExtINT interrupt. Finally, at - * least one tick may be lost due to delays. - */ - if (jiffies - t1 > 4) - return 1; - - return 0; -} - -/* - * In the SMP+IOAPIC case it might happen that there are an unspecified - * number of pending IRQ events unhandled. These cases are very rare, - * so we 'resend' these IRQs via IPIs, to the same CPU. It's much - * better to do it this way as thus we do not have to be aware of - * 'pending' interrupts in the IRQ path, except at this point. - */ -/* - * Edge triggered needs to resend any interrupt - * that was delayed but this is now handled in the device - * independent code. - */ - -/* - * Startup quirk: - * - * Starting up a edge-triggered IO-APIC interrupt is - * nasty - we need to make sure that we get the edge. - * If it is already asserted for some reason, we need - * return 1 to indicate that is was pending. - * - * This is not complete - we should be able to fake - * an edge even if it isn't on the 8259A... - * - * (We do this for level-triggered IRQs too - it cannot hurt.) - */ -static unsigned int startup_ioapic_irq(unsigned int irq) -{ - int was_pending = 0; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - if (irq < 16) { - disable_8259A_irq(irq); - if (i8259A_irq_pending(irq)) - was_pending = 1; - } - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return was_pending; -} - -static void ack_ioapic_irq(unsigned int irq) -{ - move_native_irq(irq); - ack_APIC_irq(); -} - -static void ack_ioapic_quirk_irq(unsigned int irq) -{ - unsigned long v; - int i; - - move_native_irq(irq); -/* - * It appears there is an erratum which affects at least version 0x11 - * of I/O APIC (that's the 82093AA and cores integrated into various - * chipsets). Under certain conditions a level-triggered interrupt is - * erroneously delivered as edge-triggered one but the respective IRR - * bit gets set nevertheless. As a result the I/O unit expects an EOI - * message but it will never arrive and further interrupts are blocked - * from the source. The exact reason is so far unknown, but the - * phenomenon was observed when two consecutive interrupt requests - * from a given source get delivered to the same CPU and the source is - * temporarily disabled in between. - * - * A workaround is to simulate an EOI message manually. We achieve it - * by setting the trigger mode to edge and then to level when the edge - * trigger mode gets detected in the TMR of a local APIC for a - * level-triggered interrupt. We mask the source for the time of the - * operation to prevent an edge-triggered interrupt escaping meanwhile. - * The idea is from Manfred Spraul. --macro - */ - i = irq_vector[irq]; - - v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); - - ack_APIC_irq(); - - if (!(v & (1 << (i & 0x1f)))) { - atomic_inc(&irq_mis_count); - spin_lock(&ioapic_lock); - __mask_and_edge_IO_APIC_irq(irq); - __unmask_and_level_IO_APIC_irq(irq); - spin_unlock(&ioapic_lock); - } -} - -static int ioapic_retrigger_irq(unsigned int irq) -{ - send_IPI_self(irq_vector[irq]); - - return 1; -} - -static struct irq_chip ioapic_chip __read_mostly = { - .name = "IO-APIC", - .startup = startup_ioapic_irq, - .mask = mask_IO_APIC_irq, - .unmask = unmask_IO_APIC_irq, - .ack = ack_ioapic_irq, - .eoi = ack_ioapic_quirk_irq, -#ifdef CONFIG_SMP - .set_affinity = set_ioapic_affinity_irq, -#endif - .retrigger = ioapic_retrigger_irq, -}; - - -static inline void init_IO_APIC_traps(void) -{ - int irq; - - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - for (irq = 0; irq < NR_IRQS ; irq++) { - int tmp = irq; - if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) { - /* - * Hmm.. We don't have an entry for this, - * so default to an old-fashioned 8259 - * interrupt if we can.. - */ - if (irq < 16) - make_8259A_irq(irq); - else - /* Strange. Oh, well.. */ - irq_desc[irq].chip = &no_irq_chip; - } - } -} - -/* - * The local APIC irq-chip implementation: - */ - -static void ack_apic(unsigned int irq) -{ - ack_APIC_irq(); -} - -static void mask_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); -} - -static void unmask_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); -} - -static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", - .mask = mask_lapic_irq, - .unmask = unmask_lapic_irq, - .eoi = ack_apic, -}; - -static void setup_nmi (void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); - - on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); - - apic_printk(APIC_VERBOSE, " done.\n"); -} - -/* - * This looks a bit hackish but it's about the only one way of sending - * a few INTA cycles to 8259As and any associated glue logic. ICR does - * not support the ExtINT mode, unfortunately. We need to send these - * cycles as some i82489DX-based boards have glue logic that keeps the - * 8259A interrupt line asserted until INTA. --macro - */ -static inline void unlock_ExtINT_logic(void) -{ - int apic, pin, i; - struct IO_APIC_route_entry entry0, entry1; - unsigned char save_control, save_freq_select; - - pin = find_isa_irq_pin(8, mp_INT); - if (pin == -1) { - WARN_ON_ONCE(1); - return; - } - apic = find_isa_irq_apic(8, mp_INT); - if (apic == -1) { - WARN_ON_ONCE(1); - return; - } - - entry0 = ioapic_read_entry(apic, pin); - clear_IO_APIC_pin(apic, pin); - - memset(&entry1, 0, sizeof(entry1)); - - entry1.dest_mode = 0; /* physical delivery */ - entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); - entry1.delivery_mode = dest_ExtINT; - entry1.polarity = entry0.polarity; - entry1.trigger = 0; - entry1.vector = 0; - - ioapic_write_entry(apic, pin, entry1); - - save_control = CMOS_READ(RTC_CONTROL); - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, - RTC_FREQ_SELECT); - CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); - - i = 100; - while (i-- > 0) { - mdelay(10); - if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) - i -= 10; - } - - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(apic, pin); - - ioapic_write_entry(apic, pin, entry0); -} - -int timer_uses_ioapic_pin_0; - -/* - * This code may look a bit paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - */ -static inline void __init check_timer(void) -{ - int apic1, pin1, apic2, pin2; - int vector; - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - vector = assign_irq_vector(0); - set_intr_gate(vector, interrupt[0]); - - /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. - */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - init_8259A(1); - timer_ack = 1; - if (timer_over_8254 > 0) - enable_8259A_irq(0); - - pin1 = find_isa_irq_pin(0, mp_INT); - apic1 = find_isa_irq_apic(0, mp_INT); - pin2 = ioapic_i8259.pin; - apic2 = ioapic_i8259.apic; - - if (pin1 == 0) - timer_uses_ioapic_pin_0 = 1; - - printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - vector, apic1, pin1, apic2, pin2); - - if (pin1 != -1) { - /* - * Ok, does IRQ0 through the IOAPIC work? - */ - unmask_IO_APIC_irq(0); - if (timer_irq_works()) { - if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); - setup_nmi(); - enable_8259A_irq(0); - } - if (disable_timer_pin_1 > 0) - clear_IO_APIC_pin(0, pin1); - return; - } - clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } - - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { - printk("\n..... (found pin %d) ...", pin2); - /* - * legacy devices should be connected to IO APIC #0 - */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); - if (timer_irq_works()) { - printk("works.\n"); - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - } - return; - } - /* - * Cleanup, just in case ... - */ - clear_IO_APIC_pin(apic2, pin2); - } - printk(" failed.\n"); - - if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; - } - - printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - - disable_8259A_irq(0); - set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, - "fasteoi"); - apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ - enable_8259A_irq(0); - - if (timer_irq_works()) { - printk(" works.\n"); - return; - } - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); - printk(" failed.\n"); - - printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - - timer_ack = 0; - init_8259A(0); - make_8259A_irq(0); - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); - - unlock_ExtINT_logic(); - - if (timer_irq_works()) { - printk(" works.\n"); - return; - } - printk(" failed :(.\n"); - panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " - "report. Then try booting with the 'noapic' option"); -} - -/* - * - * IRQ's that are handled by the PIC in the MPS IOAPIC case. - * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. - * Linux doesn't really care, as it's not actually used - * for any interrupt handling anyway. - */ -#define PIC_IRQS (1 << PIC_CASCADE_IR) - -void __init setup_IO_APIC(void) -{ - enable_IO_APIC(); - - if (acpi_ioapic) - io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ - else - io_apic_irqs = ~PIC_IRQS; - - printk("ENABLING IO-APIC IRQs\n"); - - /* - * Set up IO-APIC IRQ routing. - */ - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); - sync_Arb_IDs(); - setup_IO_APIC_irqs(); - init_IO_APIC_traps(); - check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); -} - -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - -/* - * Called after all the initialization is done. If we didnt find any - * APIC bugs then we can allow the modify fast path - */ - -static int __init io_apic_bug_finalize(void) -{ - if(sis_apic_bug == -1) - sis_apic_bug = 0; - return 0; -} - -late_initcall(io_apic_bug_finalize); - -struct sysfs_ioapic_data { - struct sys_device dev; - struct IO_APIC_route_entry entry[0]; -}; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; - -static int ioapic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) - entry[i] = ioapic_read_entry(dev->id, i); - - return 0; -} - -static int ioapic_resume(struct sys_device *dev) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - unsigned long flags; - union IO_APIC_reg_00 reg_00; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; - io_apic_write(dev->id, 0, reg_00.raw); - } - spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) - ioapic_write_entry(dev->id, i, entry[i]); - - return 0; -} - -static struct sysdev_class ioapic_sysdev_class = { - set_kset_name("ioapic"), - .suspend = ioapic_suspend, - .resume = ioapic_resume, -}; - -static int __init ioapic_init_sysfs(void) -{ - struct sys_device * dev; - int i, size, error = 0; - - error = sysdev_class_register(&ioapic_sysdev_class); - if (error) - return error; - - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] - * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); - if (!mp_ioapic_data[i]) { - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - memset(mp_ioapic_data[i], 0, size); - dev = &mp_ioapic_data[i]->dev; - dev->id = i; - dev->cls = &ioapic_sysdev_class; - error = sysdev_register(dev); - if (error) { - kfree(mp_ioapic_data[i]); - mp_ioapic_data[i] = NULL; - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - } - - return 0; -} - -device_initcall(ioapic_init_sysfs); - -/* - * Dynamic irq allocate and deallocation - */ -int create_irq(void) -{ - /* Allocate an unused irq */ - int irq, new, vector = 0; - unsigned long flags; - - irq = -ENOSPC; - spin_lock_irqsave(&vector_lock, flags); - for (new = (NR_IRQS - 1); new >= 0; new--) { - if (platform_legacy_irq(new)) - continue; - if (irq_vector[new] != 0) - continue; - vector = __assign_irq_vector(new); - if (likely(vector > 0)) - irq = new; - break; - } - spin_unlock_irqrestore(&vector_lock, flags); - - if (irq >= 0) { - set_intr_gate(vector, interrupt[irq]); - dynamic_irq_init(irq); - } - return irq; -} - -void destroy_irq(unsigned int irq) -{ - unsigned long flags; - - dynamic_irq_cleanup(irq); - - spin_lock_irqsave(&vector_lock, flags); - irq_vector[irq] = 0; - spin_unlock_irqrestore(&vector_lock, flags); -} - -/* - * MSI mesage composition - */ -#ifdef CONFIG_PCI_MSI -static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) -{ - int vector; - unsigned dest; - - vector = assign_irq_vector(irq); - if (vector >= 0) { - dest = cpu_mask_to_apicid(TARGET_CPUS); - - msg->address_hi = MSI_ADDR_BASE_HI; - msg->address_lo = - MSI_ADDR_BASE_LO | - ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: - MSI_ADDR_DEST_MODE_LOGICAL) | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_ADDR_REDIRECTION_CPU: - MSI_ADDR_REDIRECTION_LOWPRI) | - MSI_ADDR_DEST_ID(dest); - - msg->data = - MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: - MSI_DATA_DELIVERY_LOWPRI) | - MSI_DATA_VECTOR(vector); - } - return vector; -} - -#ifdef CONFIG_SMP -static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct msi_msg msg; - unsigned int dest; - cpumask_t tmp; - int vector; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - tmp = TARGET_CPUS; - - vector = assign_irq_vector(irq); - if (vector < 0) - return; - - dest = cpu_mask_to_apicid(mask); - - read_msi_msg(irq, &msg); - - msg.data &= ~MSI_DATA_VECTOR_MASK; - msg.data |= MSI_DATA_VECTOR(vector); - msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; - msg.address_lo |= MSI_ADDR_DEST_ID(dest); - - write_msi_msg(irq, &msg); - irq_desc[irq].affinity = mask; -} -#endif /* CONFIG_SMP */ - -/* - * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, - * which implement the MSI or MSI-X Capability Structure. - */ -static struct irq_chip msi_chip = { - .name = "PCI-MSI", - .unmask = unmask_msi_irq, - .mask = mask_msi_irq, - .ack = ack_ioapic_irq, -#ifdef CONFIG_SMP - .set_affinity = set_msi_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -{ - struct msi_msg msg; - int irq, ret; - irq = create_irq(); - if (irq < 0) - return irq; - - ret = msi_compose_msg(dev, irq, &msg); - if (ret < 0) { - destroy_irq(irq); - return ret; - } - - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); - - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, - "edge"); - - return 0; -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - -#endif /* CONFIG_PCI_MSI */ - -/* - * Hypertransport interrupt support - */ -#ifdef CONFIG_HT_IRQ - -#ifdef CONFIG_SMP - -static void target_ht_irq(unsigned int irq, unsigned int dest) -{ - struct ht_irq_msg msg; - fetch_ht_irq_msg(irq, &msg); - - msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK); - msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); - - msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest); - msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); - - write_ht_irq_msg(irq, &msg); -} - -static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) -{ - unsigned int dest; - cpumask_t tmp; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - tmp = TARGET_CPUS; - - cpus_and(mask, tmp, CPU_MASK_ALL); - - dest = cpu_mask_to_apicid(mask); - - target_ht_irq(irq, dest); - irq_desc[irq].affinity = mask; -} -#endif - -static struct irq_chip ht_irq_chip = { - .name = "PCI-HT", - .mask = mask_ht_irq, - .unmask = unmask_ht_irq, - .ack = ack_ioapic_irq, -#ifdef CONFIG_SMP - .set_affinity = set_ht_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) -{ - int vector; - - vector = assign_irq_vector(irq); - if (vector >= 0) { - struct ht_irq_msg msg; - unsigned dest; - cpumask_t tmp; - - cpus_clear(tmp); - cpu_set(vector >> 8, tmp); - dest = cpu_mask_to_apicid(tmp); - - msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); - - msg.address_lo = - HT_IRQ_LOW_BASE | - HT_IRQ_LOW_DEST_ID(dest) | - HT_IRQ_LOW_VECTOR(vector) | - ((INT_DEST_MODE == 0) ? - HT_IRQ_LOW_DM_PHYSICAL : - HT_IRQ_LOW_DM_LOGICAL) | - HT_IRQ_LOW_RQEOI_EDGE | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - HT_IRQ_LOW_MT_FIXED : - HT_IRQ_LOW_MT_ARBITRATED) | - HT_IRQ_LOW_IRQ_MASKED; - - write_ht_irq_msg(irq, &msg); - - set_irq_chip_and_handler_name(irq, &ht_irq_chip, - handle_edge_irq, "edge"); - } - return vector; -} -#endif /* CONFIG_HT_IRQ */ - -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -int __init io_apic_get_unique_id (int ioapic, int apic_id) -{ - union IO_APIC_reg_00 reg_00; - static physid_mask_t apic_id_map = PHYSID_MASK_NONE; - physid_mask_t tmp; - unsigned long flags; - int i = 0; - - /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only - * supports up to 16 on one shared APIC bus. - * - * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full - * advantage of new APIC bus architecture. - */ - - if (physids_empty(apic_id_map)) - apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - if (apic_id >= get_physical_broadcast()) { - printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " - "%d\n", ioapic, apic_id, reg_00.bits.ID); - apic_id = reg_00.bits.ID; - } - - /* - * Every APIC in a system must have a unique ID or we get lots of nice - * 'stuck on smp_invalidate_needed IPI wait' messages. - */ - if (check_apicid_used(apic_id_map, apic_id)) { - - for (i = 0; i < get_physical_broadcast(); i++) { - if (!check_apicid_used(apic_id_map, i)) - break; - } - - if (i == get_physical_broadcast()) - panic("Max apic_id exceeded!\n"); - - printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " - "trying %d\n", ioapic, apic_id, i); - - apic_id = i; - } - - tmp = apicid_to_cpu_present(apic_id); - physids_or(apic_id_map, apic_id_map, tmp); - - if (reg_00.bits.ID != apic_id) { - reg_00.bits.ID = apic_id; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0, reg_00.raw); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* Sanity check */ - if (reg_00.bits.ID != apic_id) { - printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); - return -1; - } - } - - apic_printk(APIC_VERBOSE, KERN_INFO - "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); - - return apic_id; -} - - -int __init io_apic_get_version (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.version; -} - - -int __init io_apic_get_redir_entries (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.entries; -} - - -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) -{ - struct IO_APIC_route_entry entry; - unsigned long flags; - - if (!IO_APIC_IRQ(irq)) { - printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - /* - * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. - * Note that we mask (disable) IRQs now -- these get enabled when the - * corresponding device driver registers for this IRQ. - */ - - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.trigger = edge_level; - entry.polarity = active_high_low; - entry.mask = 1; - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= 16) - add_pin_to_irq(irq, ioapic, pin); - - entry.vector = assign_irq_vector(irq); - - apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " - "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, - edge_level, active_high_low); - - ioapic_register_intr(irq, entry.vector, edge_level); - - if (!ioapic && (irq < 16)) - disable_8259A_irq(irq); - - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(ioapic, pin, entry); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return 0; -} - -#endif /* CONFIG_ACPI */ - -static int __init parse_disable_timer_pin_1(char *arg) -{ - disable_timer_pin_1 = 1; - return 0; -} -early_param("disable_timer_pin_1", parse_disable_timer_pin_1); - -static int __init parse_enable_timer_pin_1(char *arg) -{ - disable_timer_pin_1 = -1; - return 0; -} -early_param("enable_timer_pin_1", parse_enable_timer_pin_1); - -static int __init parse_noapic(char *arg) -{ - /* disable IO-APIC */ - disable_ioapic_setup(); - return 0; -} -early_param("noapic", parse_noapic); diff --git a/arch/i386/kernel/ioport_32.c b/arch/i386/kernel/ioport_32.c deleted file mode 100644 index 3d310a9..0000000 --- a/arch/i386/kernel/ioport_32.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * linux/arch/i386/kernel/ioport.c - * - * This contains the io-permission bitmap code - written by obz, with changes - * by Linus. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ -static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value) -{ - unsigned long mask; - unsigned long *bitmap_base = bitmap + (base / BITS_PER_LONG); - unsigned int low_index = base & (BITS_PER_LONG-1); - int length = low_index + extent; - - if (low_index != 0) { - mask = (~0UL << low_index); - if (length < BITS_PER_LONG) - mask &= ~(~0UL << length); - if (new_value) - *bitmap_base++ |= mask; - else - *bitmap_base++ &= ~mask; - length -= BITS_PER_LONG; - } - - mask = (new_value ? ~0UL : 0UL); - while (length >= BITS_PER_LONG) { - *bitmap_base++ = mask; - length -= BITS_PER_LONG; - } - - if (length > 0) { - mask = ~(~0UL << length); - if (new_value) - *bitmap_base++ |= mask; - else - *bitmap_base++ &= ~mask; - } -} - - -/* - * this changes the io permissions bitmap in the current task. - */ -asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) -{ - unsigned long i, max_long, bytes, bytes_updated; - struct thread_struct * t = ¤t->thread; - struct tss_struct * tss; - unsigned long *bitmap; - - if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) - return -EINVAL; - if (turn_on && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* - * If it's the first ioperm() call in this thread's lifetime, set the - * IO bitmap up. ioperm() is much less timing critical than clone(), - * this is why we delay this operation until now: - */ - if (!t->io_bitmap_ptr) { - bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); - if (!bitmap) - return -ENOMEM; - - memset(bitmap, 0xff, IO_BITMAP_BYTES); - t->io_bitmap_ptr = bitmap; - set_thread_flag(TIF_IO_BITMAP); - } - - /* - * do it in the per-thread copy and in the TSS ... - * - * Disable preemption via get_cpu() - we must not switch away - * because the ->io_bitmap_max value must match the bitmap - * contents: - */ - tss = &per_cpu(init_tss, get_cpu()); - - set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); - - /* - * Search for a (possibly new) maximum. This is simple and stupid, - * to keep it obviously correct: - */ - max_long = 0; - for (i = 0; i < IO_BITMAP_LONGS; i++) - if (t->io_bitmap_ptr[i] != ~0UL) - max_long = i; - - bytes = (max_long + 1) * sizeof(long); - bytes_updated = max(bytes, t->io_bitmap_max); - - t->io_bitmap_max = bytes; - - /* - * Sets the lazy trigger so that the next I/O operation will - * reload the correct bitmap. - * Reset the owner so that a process switch will not set - * tss->io_bitmap_base to IO_BITMAP_OFFSET. - */ - tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; - tss->io_bitmap_owner = NULL; - - put_cpu(); - - return 0; -} - -/* - * sys_iopl has to be used when you want to access the IO ports - * beyond the 0x3ff range: to get the full 65536 ports bitmapped - * you'd need 8kB of bitmaps/process, which is a bit excessive. - * - * Here we just change the eflags value on the stack: we allow - * only the super-user to do it. This depends on the stack-layout - * on system-call entry - see also fork() and the signal handling - * code. - */ - -asmlinkage long sys_iopl(unsigned long unused) -{ - volatile struct pt_regs * regs = (struct pt_regs *) &unused; - unsigned int level = regs->ebx; - unsigned int old = (regs->eflags >> 12) & 3; - struct thread_struct *t = ¤t->thread; - - if (level > 3) - return -EINVAL; - /* Trying to gain more privileges? */ - if (level > old) { - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - } - t->iopl = level << 12; - regs->eflags = (regs->eflags & ~X86_EFLAGS_IOPL) | t->iopl; - set_iopl_mask(t->iopl); - return 0; -} diff --git a/arch/i386/kernel/irq_32.c b/arch/i386/kernel/irq_32.c deleted file mode 100644 index dd2b97f..0000000 --- a/arch/i386/kernel/irq_32.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * linux/arch/i386/kernel/irq.c - * - * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar - * - * This file contains the lowest level x86-specific interrupt - * entry, irq-stacks and irq statistics code. All the remaining - * irq logic is done by the generic kernel/irq/ code and - * by the x86-specific irq controller code. (e.g. i8259.c and - * io_apic.c.) - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); -EXPORT_PER_CPU_SYMBOL(irq_stat); - -DEFINE_PER_CPU(struct pt_regs *, irq_regs); -EXPORT_PER_CPU_SYMBOL(irq_regs); - -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); - -#ifdef CONFIG_X86_LOCAL_APIC - /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But only ack when the APIC is enabled -AK - */ - if (cpu_has_apic) - ack_APIC_irq(); -#endif -} - -#ifdef CONFIG_4KSTACKS -/* - * per-CPU IRQ handling contexts (thread information and stack) - */ -union irq_ctx { - struct thread_info tinfo; - u32 stack[THREAD_SIZE/sizeof(u32)]; -}; - -static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; -static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -#endif - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -fastcall unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - /* high bit used in ret_from_ code */ - int irq = ~regs->orig_eax; - struct irq_desc *desc = irq_desc + irq; -#ifdef CONFIG_4KSTACKS - union irq_ctx *curctx, *irqctx; - u32 *isp; -#endif - - if (unlikely((unsigned)irq >= NR_IRQS)) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __FUNCTION__, irq); - BUG(); - } - - old_regs = set_irq_regs(regs); - irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long esp; - - __asm__ __volatile__("andl %%esp,%0" : - "=r" (esp) : "0" (THREAD_SIZE - 1)); - if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - esp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - -#ifdef CONFIG_4KSTACKS - - curctx = (union irq_ctx *) current_thread_info(); - irqctx = hardirq_ctx[smp_processor_id()]; - - /* - * this is where we switch to the IRQ stack. However, if we are - * already using the IRQ stack (because we interrupted a hardirq - * handler) we can't do that and just have to keep using the - * current stack (which is the irq stack already after all) - */ - if (curctx != irqctx) { - int arg1, arg2, ebx; - - /* build the stack frame on the IRQ stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - irqctx->tinfo.task = curctx->tinfo.task; - irqctx->tinfo.previous_esp = current_stack_pointer; - - /* - * Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqctx->tinfo.preempt_count = - (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | - (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (ebx) - : "0" (irq), "1" (desc), "2" (isp), - "D" (desc->handle_irq) - : "memory", "cc" - ); - } else -#endif - desc->handle_irq(irq, desc); - - irq_exit(); - set_irq_regs(old_regs); - return 1; -} - -#ifdef CONFIG_4KSTACKS - -static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -/* - * allocate per-cpu stacks for hardirq and for softirq processing - */ -void irq_ctx_init(int cpu) -{ - union irq_ctx *irqctx; - - if (hardirq_ctx[cpu]) - return; - - irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); - - hardirq_ctx[cpu] = irqctx; - - irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = 0; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); - - softirq_ctx[cpu] = irqctx; - - printk("CPU %u irqstacks, hard=%p soft=%p\n", - cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); -} - -void irq_ctx_exit(int cpu) -{ - hardirq_ctx[cpu] = NULL; -} - -extern asmlinkage void __do_softirq(void); - -asmlinkage void do_softirq(void) -{ - unsigned long flags; - struct thread_info *curctx; - union irq_ctx *irqctx; - u32 *isp; - - if (in_interrupt()) - return; - - local_irq_save(flags); - - if (local_softirq_pending()) { - curctx = current_thread_info(); - irqctx = softirq_ctx[smp_processor_id()]; - irqctx->tinfo.task = curctx->task; - irqctx->tinfo.previous_esp = current_stack_pointer; - - /* build the stack frame on the softirq stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call __do_softirq \n" - " movl %%ebx,%%esp \n" - : "=b"(isp) - : "0"(isp) - : "memory", "cc", "edx", "ecx", "eax" - ); - /* - * Shouldnt happen, we returned above if in_interrupt(): - */ - WARN_ON_ONCE(softirq_count()); - } - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(do_softirq); -#endif - -/* - * Interrupt statistics: - */ - -atomic_t irq_err_count; - -/* - * /proc/interrupts printing: - */ - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%-8d",j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto skip; - seq_printf(p, "%3d: ",i); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); -#endif - seq_printf(p, " %8s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); - seq_printf(p, " %s", action->name); - - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", nmi_count(j)); - seq_putc(p, '\n'); -#ifdef CONFIG_X86_LOCAL_APIC - seq_printf(p, "LOC: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", - per_cpu(irq_stat,j).apic_timer_irqs); - seq_putc(p, '\n'); -#endif - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); -#if defined(CONFIG_X86_IO_APIC) - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); -#endif - } - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -#include - -void fixup_irqs(cpumask_t map) -{ - unsigned int irq; - static int warned; - - for (irq = 0; irq < NR_IRQS; irq++) { - cpumask_t mask; - if (irq == 2) - continue; - - cpus_and(mask, irq_desc[irq].affinity, map); - if (any_online_cpu(mask) == NR_CPUS) { - printk("Breaking affinity for irq %i\n", irq); - mask = map; - } - if (irq_desc[irq].chip->set_affinity) - irq_desc[irq].chip->set_affinity(irq, mask); - else if (irq_desc[irq].action && !(warned++)) - printk("Cannot set affinity for irq %i\n", irq); - } - -#if 0 - barrier(); - /* Ingo Molnar says: "after the IO-APIC masks have been redirected - [note the nop - the interrupt-enable boundary on x86 is two - instructions from sti] - to flush out pending hardirqs and - IPIs. After this point nothing is supposed to reach this CPU." */ - __asm__ __volatile__("sti; nop; cli"); - barrier(); -#else - /* That doesn't seem sufficient. Give it 1ms. */ - local_irq_enable(); - mdelay(1); - local_irq_disable(); -#endif -} -#endif - diff --git a/arch/i386/kernel/kprobes_32.c b/arch/i386/kernel/kprobes_32.c deleted file mode 100644 index 448a50b..0000000 --- a/arch/i386/kernel/kprobes_32.c +++ /dev/null @@ -1,751 +0,0 @@ -/* - * Kernel Probes (KProbes) - * arch/i386/kernel/kprobes.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S Kernel - * Probes initial implementation ( includes contributions from - * Rusty Russell). - * 2004-July Suparna Bhattacharya added jumper probes - * interface to access function arguments. - * 2005-May Hien Nguyen , Jim Keniston - * and Prasanna S Panchamukhi - * added function-return probes. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -void jprobe_return_end(void); - -DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; -DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); - -/* insert a jmp code */ -static __always_inline void set_jmp_op(void *from, void *to) -{ - struct __arch_jmp_op { - char op; - long raddr; - } __attribute__((packed)) *jop; - jop = (struct __arch_jmp_op *)from; - jop->raddr = (long)(to) - ((long)(from) + 5); - jop->op = RELATIVEJUMP_INSTRUCTION; -} - -/* - * returns non-zero if opcodes can be boosted. - */ -static __always_inline int can_boost(kprobe_opcode_t *opcodes) -{ -#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ - (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ - (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ - (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ - (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ - << (row % 32)) - /* - * Undefined/reserved opcodes, conditional jump, Opcode Extension - * Groups, and some special opcodes can not be boost. - */ - static const unsigned long twobyte_is_boostable[256 / 32] = { - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - /* ------------------------------- */ - W(0x00, 0,0,1,1,0,0,1,0,1,1,0,0,0,0,0,0)| /* 00 */ - W(0x10, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 10 */ - W(0x20, 1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0)| /* 20 */ - W(0x30, 0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 30 */ - W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 40 */ - W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 50 */ - W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,0,0,1,1)| /* 60 */ - W(0x70, 0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1), /* 70 */ - W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 80 */ - W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1), /* 90 */ - W(0xa0, 1,1,0,1,1,1,0,0,1,1,0,1,1,1,0,1)| /* a0 */ - W(0xb0, 1,1,1,1,1,1,1,1,0,0,0,1,1,1,1,1), /* b0 */ - W(0xc0, 1,1,0,0,0,0,0,0,1,1,1,1,1,1,1,1)| /* c0 */ - W(0xd0, 0,1,1,1,0,1,0,0,1,1,0,1,1,1,0,1), /* d0 */ - W(0xe0, 0,1,1,0,0,1,0,0,1,1,0,1,1,1,0,1)| /* e0 */ - W(0xf0, 0,1,1,1,0,1,0,0,1,1,1,0,1,1,1,0) /* f0 */ - /* ------------------------------- */ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - }; -#undef W - kprobe_opcode_t opcode; - kprobe_opcode_t *orig_opcodes = opcodes; -retry: - if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) - return 0; - opcode = *(opcodes++); - - /* 2nd-byte opcode */ - if (opcode == 0x0f) { - if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) - return 0; - return test_bit(*opcodes, twobyte_is_boostable); - } - - switch (opcode & 0xf0) { - case 0x60: - if (0x63 < opcode && opcode < 0x67) - goto retry; /* prefixes */ - /* can't boost Address-size override and bound */ - return (opcode != 0x62 && opcode != 0x67); - case 0x70: - return 0; /* can't boost conditional jump */ - case 0xc0: - /* can't boost software-interruptions */ - return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf; - case 0xd0: - /* can boost AA* and XLAT */ - return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); - case 0xe0: - /* can boost in/out and absolute jmps */ - return ((opcode & 0x04) || opcode == 0xea); - case 0xf0: - if ((opcode & 0x0c) == 0 && opcode != 0xf1) - goto retry; /* lock/rep(ne) prefix */ - /* clear and set flags can be boost */ - return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); - default: - if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e) - goto retry; /* prefixes */ - /* can't boost CS override and call */ - return (opcode != 0x2e && opcode != 0x9a); - } -} - -/* - * returns non-zero if opcode modifies the interrupt flag. - */ -static int __kprobes is_IF_modifier(kprobe_opcode_t opcode) -{ - switch (opcode) { - case 0xfa: /* cli */ - case 0xfb: /* sti */ - case 0xcf: /* iret/iretd */ - case 0x9d: /* popf/popfd */ - return 1; - } - return 0; -} - -int __kprobes arch_prepare_kprobe(struct kprobe *p) -{ - /* insn: must be on special executable page on i386. */ - p->ainsn.insn = get_insn_slot(); - if (!p->ainsn.insn) - return -ENOMEM; - - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); - p->opcode = *p->addr; - if (can_boost(p->addr)) { - p->ainsn.boostable = 0; - } else { - p->ainsn.boostable = -1; - } - return 0; -} - -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1); -} - -void __kprobes arch_disarm_kprobe(struct kprobe *p) -{ - text_poke(p->addr, &p->opcode, 1); -} - -void __kprobes arch_remove_kprobe(struct kprobe *p) -{ - mutex_lock(&kprobe_mutex); - free_insn_slot(p->ainsn.insn, (p->ainsn.boostable == 1)); - mutex_unlock(&kprobe_mutex); -} - -static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - kcb->prev_kprobe.kp = kprobe_running(); - kcb->prev_kprobe.status = kcb->kprobe_status; - kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; - kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; -} - -static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; - kcb->kprobe_status = kcb->prev_kprobe.status; - kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; - kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; -} - -static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - __get_cpu_var(current_kprobe) = p; - kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags - = (regs->eflags & (TF_MASK | IF_MASK)); - if (is_IF_modifier(p->opcode)) - kcb->kprobe_saved_eflags &= ~IF_MASK; -} - -static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) -{ - regs->eflags |= TF_MASK; - regs->eflags &= ~IF_MASK; - /*single step inline if the instruction is an int3*/ - if (p->opcode == BREAKPOINT_INSTRUCTION) - regs->eip = (unsigned long)p->addr; - else - regs->eip = (unsigned long)p->ainsn.insn; -} - -/* Called with kretprobe_lock held */ -void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, - struct pt_regs *regs) -{ - unsigned long *sara = (unsigned long *)®s->esp; - - ri->ret_addr = (kprobe_opcode_t *) *sara; - - /* Replace the return addr with trampoline addr */ - *sara = (unsigned long) &kretprobe_trampoline; -} - -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. - */ -static int __kprobes kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *p; - int ret = 0; - kprobe_opcode_t *addr; - struct kprobe_ctlblk *kcb; - - addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); - - /* - * We don't want to be preempted for the entire - * duration of kprobe processing - */ - preempt_disable(); - kcb = get_kprobe_ctlblk(); - - /* Check we're not actually recursing */ - if (kprobe_running()) { - p = get_kprobe(addr); - if (p) { - if (kcb->kprobe_status == KPROBE_HIT_SS && - *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { - regs->eflags &= ~TF_MASK; - regs->eflags |= kcb->kprobe_saved_eflags; - goto no_kprobe; - } - /* We have reentered the kprobe_handler(), since - * another probe was hit while within the handler. - * We here save the original kprobes variables and - * just single step on the instruction of the new probe - * without calling any user handlers. - */ - save_previous_kprobe(kcb); - set_current_kprobe(p, regs, kcb); - kprobes_inc_nmissed_count(p); - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_REENTER; - return 1; - } else { - if (*addr != BREAKPOINT_INSTRUCTION) { - /* The breakpoint instruction was removed by - * another cpu right after we hit, no further - * handling of this interrupt is appropriate - */ - regs->eip -= sizeof(kprobe_opcode_t); - ret = 1; - goto no_kprobe; - } - p = __get_cpu_var(current_kprobe); - if (p->break_handler && p->break_handler(p, regs)) { - goto ss_probe; - } - } - goto no_kprobe; - } - - p = get_kprobe(addr); - if (!p) { - if (*addr != BREAKPOINT_INSTRUCTION) { - /* - * The breakpoint instruction was removed right - * after we hit it. Another cpu has removed - * either a probepoint or a debugger breakpoint - * at this address. In either case, no further - * handling of this interrupt is appropriate. - * Back up over the (now missing) int3 and run - * the original instruction. - */ - regs->eip -= sizeof(kprobe_opcode_t); - ret = 1; - } - /* Not one of ours: let kernel handle it */ - goto no_kprobe; - } - - set_current_kprobe(p, regs, kcb); - kcb->kprobe_status = KPROBE_HIT_ACTIVE; - - if (p->pre_handler && p->pre_handler(p, regs)) - /* handler has already set things up, so skip ss setup */ - return 1; - -ss_probe: -#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM) - if (p->ainsn.boostable == 1 && !p->post_handler){ - /* Boost up -- we can execute copied instructions directly */ - reset_current_kprobe(); - regs->eip = (unsigned long)p->ainsn.insn; - preempt_enable_no_resched(); - return 1; - } -#endif - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_HIT_SS; - return 1; - -no_kprobe: - preempt_enable_no_resched(); - return ret; -} - -/* - * For function-return probes, init_kprobes() establishes a probepoint - * here. When a retprobed function returns, this probe is hit and - * trampoline_probe_handler() runs, calling the kretprobe's handler. - */ - void __kprobes kretprobe_trampoline_holder(void) - { - asm volatile ( ".global kretprobe_trampoline\n" - "kretprobe_trampoline: \n" - " pushf\n" - /* skip cs, eip, orig_eax */ - " subl $12, %esp\n" - " pushl %fs\n" - " pushl %ds\n" - " pushl %es\n" - " pushl %eax\n" - " pushl %ebp\n" - " pushl %edi\n" - " pushl %esi\n" - " pushl %edx\n" - " pushl %ecx\n" - " pushl %ebx\n" - " movl %esp, %eax\n" - " call trampoline_handler\n" - /* move eflags to cs */ - " movl 52(%esp), %edx\n" - " movl %edx, 48(%esp)\n" - /* save true return address on eflags */ - " movl %eax, 52(%esp)\n" - " popl %ebx\n" - " popl %ecx\n" - " popl %edx\n" - " popl %esi\n" - " popl %edi\n" - " popl %ebp\n" - " popl %eax\n" - /* skip eip, orig_eax, es, ds, fs */ - " addl $20, %esp\n" - " popf\n" - " ret\n"); -} - -/* - * Called from kretprobe_trampoline - */ -fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) -{ - struct kretprobe_instance *ri = NULL; - struct hlist_head *head, empty_rp; - struct hlist_node *node, *tmp; - unsigned long flags, orig_ret_address = 0; - unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; - - INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); - /* fixup registers */ - regs->xcs = __KERNEL_CS | get_kernel_rpl(); - regs->eip = trampoline_address; - regs->orig_eax = 0xffffffff; - - /* - * It is possible to have multiple instances associated with a given - * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return - * return probe was registered for a target function. - * - * We can handle this because: - * - instances are always inserted at the head of the list - * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the - * real return address, and all the rest will point to - * kretprobe_trampoline - */ - hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) - /* another task is sharing our hash bucket */ - continue; - - if (ri->rp && ri->rp->handler){ - __get_cpu_var(current_kprobe) = &ri->rp->kp; - get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE; - ri->rp->handler(ri, regs); - __get_cpu_var(current_kprobe) = NULL; - } - - orig_ret_address = (unsigned long)ri->ret_addr; - recycle_rp_inst(ri, &empty_rp); - - if (orig_ret_address != trampoline_address) - /* - * This is the real return address. Any other - * instances associated with this task are for - * other calls deeper on the call stack - */ - break; - } - - kretprobe_assert(ri, orig_ret_address, trampoline_address); - spin_unlock_irqrestore(&kretprobe_lock, flags); - - hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { - hlist_del(&ri->hlist); - kfree(ri); - } - return (void*)orig_ret_address; -} - -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "int 3" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - * - * This function prepares to return from the post-single-step - * interrupt. We have to fix up the stack as follows: - * - * 0) Except in the case of absolute or indirect jump or call instructions, - * the new eip is relative to the copied instruction. We need to make - * it relative to the original instruction. - * - * 1) If the single-stepped instruction was pushfl, then the TF and IF - * flags are set in the just-pushed eflags, and may need to be cleared. - * - * 2) If the single-stepped instruction was a call, the return address - * that is atop the stack is the address following the copied instruction. - * We need to make it the address following the original instruction. - * - * This function also checks instruction size for preparing direct execution. - */ -static void __kprobes resume_execution(struct kprobe *p, - struct pt_regs *regs, struct kprobe_ctlblk *kcb) -{ - unsigned long *tos = (unsigned long *)®s->esp; - unsigned long copy_eip = (unsigned long)p->ainsn.insn; - unsigned long orig_eip = (unsigned long)p->addr; - - regs->eflags &= ~TF_MASK; - switch (p->ainsn.insn[0]) { - case 0x9c: /* pushfl */ - *tos &= ~(TF_MASK | IF_MASK); - *tos |= kcb->kprobe_old_eflags; - break; - case 0xc2: /* iret/ret/lret */ - case 0xc3: - case 0xca: - case 0xcb: - case 0xcf: - case 0xea: /* jmp absolute -- eip is correct */ - /* eip is already adjusted, no more changes required */ - p->ainsn.boostable = 1; - goto no_change; - case 0xe8: /* call relative - Fix return addr */ - *tos = orig_eip + (*tos - copy_eip); - break; - case 0x9a: /* call absolute -- same as call absolute, indirect */ - *tos = orig_eip + (*tos - copy_eip); - goto no_change; - case 0xff: - if ((p->ainsn.insn[1] & 0x30) == 0x10) { - /* - * call absolute, indirect - * Fix return addr; eip is correct. - * But this is not boostable - */ - *tos = orig_eip + (*tos - copy_eip); - goto no_change; - } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ - ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* eip is correct. And this is boostable */ - p->ainsn.boostable = 1; - goto no_change; - } - default: - break; - } - - if (p->ainsn.boostable == 0) { - if ((regs->eip > copy_eip) && - (regs->eip - copy_eip) + 5 < MAX_INSN_SIZE) { - /* - * These instructions can be executed directly if it - * jumps back to correct address. - */ - set_jmp_op((void *)regs->eip, - (void *)orig_eip + (regs->eip - copy_eip)); - p->ainsn.boostable = 1; - } else { - p->ainsn.boostable = -1; - } - } - - regs->eip = orig_eip + (regs->eip - copy_eip); - -no_change: - return; -} - -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. - */ -static int __kprobes post_kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (!cur) - return 0; - - if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { - kcb->kprobe_status = KPROBE_HIT_SSDONE; - cur->post_handler(cur, regs, 0); - } - - resume_execution(cur, regs, kcb); - regs->eflags |= kcb->kprobe_saved_eflags; - - /*Restore back the original saved kprobes variables and continue. */ - if (kcb->kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(kcb); - goto out; - } - reset_current_kprobe(); -out: - preempt_enable_no_resched(); - - /* - * if somebody else is singlestepping across a probe point, eflags - * will have TF set, in which case, continue the remaining processing - * of do_debug, as if this is not a probe hit. - */ - if (regs->eflags & TF_MASK) - return 0; - - return 1; -} - -static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - switch(kcb->kprobe_status) { - case KPROBE_HIT_SS: - case KPROBE_REENTER: - /* - * We are here because the instruction being single - * stepped caused a page fault. We reset the current - * kprobe and the eip points back to the probe address - * and allow the page fault handler to continue as a - * normal page fault. - */ - regs->eip = (unsigned long)cur->addr; - regs->eflags |= kcb->kprobe_old_eflags; - if (kcb->kprobe_status == KPROBE_REENTER) - restore_previous_kprobe(kcb); - else - reset_current_kprobe(); - preempt_enable_no_resched(); - break; - case KPROBE_HIT_ACTIVE: - case KPROBE_HIT_SSDONE: - /* - * We increment the nmissed count for accounting, - * we can also use npre/npostfault count for accouting - * these specific fault cases. - */ - kprobes_inc_nmissed_count(cur); - - /* - * We come here because instructions in the pre/post - * handler caused the page_fault, this could happen - * if handler tries to access user space by - * copy_from_user(), get_user() etc. Let the - * user-specified handler try to fix it first. - */ - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - /* - * In case the user-specified fault handler returned - * zero, try to fix up. - */ - if (fixup_exception(regs)) - return 1; - - /* - * fixup_exception() could not handle it, - * Let do_page_fault() fix it. - */ - break; - default: - break; - } - return 0; -} - -/* - * Wrapper routine to for handling exceptions. - */ -int __kprobes kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - if (args->regs && user_mode_vm(args->regs)) - return ret; - - switch (val) { - case DIE_INT3: - if (kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_DEBUG: - if (post_kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_GPF: - case DIE_PAGE_FAULT: - /* kprobe_running() needs smp_processor_id() */ - preempt_disable(); - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - preempt_enable(); - break; - default: - break; - } - return ret; -} - -int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct jprobe *jp = container_of(p, struct jprobe, kp); - unsigned long addr; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - kcb->jprobe_saved_regs = *regs; - kcb->jprobe_saved_esp = ®s->esp; - addr = (unsigned long)(kcb->jprobe_saved_esp); - - /* - * TBD: As Linus pointed out, gcc assumes that the callee - * owns the argument space and could overwrite it, e.g. - * tailcall optimization. So, to be absolutely safe - * we also save and restore enough stack bytes to cover - * the argument area. - */ - memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, - MIN_STACK_SIZE(addr)); - regs->eflags &= ~IF_MASK; - regs->eip = (unsigned long)(jp->entry); - return 1; -} - -void __kprobes jprobe_return(void) -{ - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - asm volatile (" xchgl %%ebx,%%esp \n" - " int3 \n" - " .globl jprobe_return_end \n" - " jprobe_return_end: \n" - " nop \n"::"b" - (kcb->jprobe_saved_esp):"memory"); -} - -int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - u8 *addr = (u8 *) (regs->eip - 1); - unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); - struct jprobe *jp = container_of(p, struct jprobe, kp); - - if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (®s->esp != kcb->jprobe_saved_esp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_esp, - struct pt_regs, esp); - printk("current esp %p does not match saved esp %p\n", - ®s->esp, kcb->jprobe_saved_esp); - printk("Saved registers for jprobe %p\n", jp); - show_registers(saved_regs); - printk("Current registers\n"); - show_registers(regs); - BUG(); - } - *regs = kcb->jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, - MIN_STACK_SIZE(stack_addr)); - preempt_enable_no_resched(); - return 1; - } - return 0; -} - -int __kprobes arch_trampoline_kprobe(struct kprobe *p) -{ - return 0; -} - -int __init arch_init_kprobes(void) -{ - return 0; -} diff --git a/arch/i386/kernel/ldt_32.c b/arch/i386/kernel/ldt_32.c deleted file mode 100644 index e0b2d17..0000000 --- a/arch/i386/kernel/ldt_32.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * linux/arch/i386/kernel/ldt.c - * - * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds - * Copyright (C) 1999 Ingo Molnar - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ -static void flush_ldt(void *null) -{ - if (current->active_mm) - load_LDT(¤t->active_mm->context); -} -#endif - -static int alloc_ldt(mm_context_t *pc, int mincount, int reload) -{ - void *oldldt; - void *newldt; - int oldsize; - - if (mincount <= pc->size) - return 0; - oldsize = pc->size; - mincount = (mincount+511)&(~511); - if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE) - newldt = vmalloc(mincount*LDT_ENTRY_SIZE); - else - newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL); - - if (!newldt) - return -ENOMEM; - - if (oldsize) - memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE); - oldldt = pc->ldt; - memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE); - pc->ldt = newldt; - wmb(); - pc->size = mincount; - wmb(); - - if (reload) { -#ifdef CONFIG_SMP - cpumask_t mask; - preempt_disable(); - load_LDT(pc); - mask = cpumask_of_cpu(smp_processor_id()); - if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); - preempt_enable(); -#else - load_LDT(pc); -#endif - } - if (oldsize) { - if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE) - vfree(oldldt); - else - kfree(oldldt); - } - return 0; -} - -static inline int copy_ldt(mm_context_t *new, mm_context_t *old) -{ - int err = alloc_ldt(new, old->size, 0); - if (err < 0) - return err; - memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE); - return 0; -} - -/* - * we do not have to muck with descriptors here, that is - * done in switch_mm() as needed. - */ -int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - struct mm_struct * old_mm; - int retval = 0; - - init_MUTEX(&mm->context.sem); - mm->context.size = 0; - old_mm = current->mm; - if (old_mm && old_mm->context.size > 0) { - down(&old_mm->context.sem); - retval = copy_ldt(&mm->context, &old_mm->context); - up(&old_mm->context.sem); - } - return retval; -} - -/* - * No need to lock the MM as we are the last user - */ -void destroy_context(struct mm_struct *mm) -{ - if (mm->context.size) { - if (mm == current->active_mm) - clear_LDT(); - if (mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE) - vfree(mm->context.ldt); - else - kfree(mm->context.ldt); - mm->context.size = 0; - } -} - -static int read_ldt(void __user * ptr, unsigned long bytecount) -{ - int err; - unsigned long size; - struct mm_struct * mm = current->mm; - - if (!mm->context.size) - return 0; - if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) - bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; - - down(&mm->context.sem); - size = mm->context.size*LDT_ENTRY_SIZE; - if (size > bytecount) - size = bytecount; - - err = 0; - if (copy_to_user(ptr, mm->context.ldt, size)) - err = -EFAULT; - up(&mm->context.sem); - if (err < 0) - goto error_return; - if (size != bytecount) { - /* zero-fill the rest */ - if (clear_user(ptr+size, bytecount-size) != 0) { - err = -EFAULT; - goto error_return; - } - } - return bytecount; -error_return: - return err; -} - -static int read_default_ldt(void __user * ptr, unsigned long bytecount) -{ - int err; - unsigned long size; - - err = 0; - size = 5*sizeof(struct desc_struct); - if (size > bytecount) - size = bytecount; - - err = size; - if (clear_user(ptr, size)) - err = -EFAULT; - - return err; -} - -static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) -{ - struct mm_struct * mm = current->mm; - __u32 entry_1, entry_2; - int error; - struct user_desc ldt_info; - - error = -EINVAL; - if (bytecount != sizeof(ldt_info)) - goto out; - error = -EFAULT; - if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) - goto out; - - error = -EINVAL; - if (ldt_info.entry_number >= LDT_ENTRIES) - goto out; - if (ldt_info.contents == 3) { - if (oldmode) - goto out; - if (ldt_info.seg_not_present == 0) - goto out; - } - - down(&mm->context.sem); - if (ldt_info.entry_number >= mm->context.size) { - error = alloc_ldt(¤t->mm->context, ldt_info.entry_number+1, 1); - if (error < 0) - goto out_unlock; - } - - /* Allow LDTs to be cleared by the user. */ - if (ldt_info.base_addr == 0 && ldt_info.limit == 0) { - if (oldmode || LDT_empty(&ldt_info)) { - entry_1 = 0; - entry_2 = 0; - goto install; - } - } - - entry_1 = LDT_entry_a(&ldt_info); - entry_2 = LDT_entry_b(&ldt_info); - if (oldmode) - entry_2 &= ~(1 << 20); - - /* Install the new entry ... */ -install: - write_ldt_entry(mm->context.ldt, ldt_info.entry_number, entry_1, entry_2); - error = 0; - -out_unlock: - up(&mm->context.sem); -out: - return error; -} - -asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) -{ - int ret = -ENOSYS; - - switch (func) { - case 0: - ret = read_ldt(ptr, bytecount); - break; - case 1: - ret = write_ldt(ptr, bytecount, 1); - break; - case 2: - ret = read_default_ldt(ptr, bytecount); - break; - case 0x11: - ret = write_ldt(ptr, bytecount, 0); - break; - } - return ret; -} diff --git a/arch/i386/kernel/machine_kexec_32.c b/arch/i386/kernel/machine_kexec_32.c deleted file mode 100644 index 91966ba..0000000 --- a/arch/i386/kernel/machine_kexec_32.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * machine_kexec.c - handle transition of Linux booting another kernel - * Copyright (C) 2002-2005 Eric Biederman - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) -static u32 kexec_pgd[1024] PAGE_ALIGNED; -#ifdef CONFIG_X86_PAE -static u32 kexec_pmd0[1024] PAGE_ALIGNED; -static u32 kexec_pmd1[1024] PAGE_ALIGNED; -#endif -static u32 kexec_pte0[1024] PAGE_ALIGNED; -static u32 kexec_pte1[1024] PAGE_ALIGNED; - -static void set_idt(void *newidt, __u16 limit) -{ - struct Xgt_desc_struct curidt; - - /* ia32 supports unaliged loads & stores */ - curidt.size = limit; - curidt.address = (unsigned long)newidt; - - load_idt(&curidt); -}; - - -static void set_gdt(void *newgdt, __u16 limit) -{ - struct Xgt_desc_struct curgdt; - - /* ia32 supports unaligned loads & stores */ - curgdt.size = limit; - curgdt.address = (unsigned long)newgdt; - - load_gdt(&curgdt); -}; - -static void load_segments(void) -{ -#define __STR(X) #X -#define STR(X) __STR(X) - - __asm__ __volatile__ ( - "\tljmp $"STR(__KERNEL_CS)",$1f\n" - "\t1:\n" - "\tmovl $"STR(__KERNEL_DS)",%%eax\n" - "\tmovl %%eax,%%ds\n" - "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" - "\tmovl %%eax,%%ss\n" - ::: "eax", "memory"); -#undef STR -#undef __STR -} - -/* - * A architecture hook called to validate the - * proposed image and prepare the control pages - * as needed. The pages for KEXEC_CONTROL_CODE_SIZE - * have been allocated, but the segments have yet - * been copied into the kernel. - * - * Do what every setup is needed on image and the - * reboot code buffer to allow us to avoid allocations - * later. - * - * Currently nothing. - */ -int machine_kexec_prepare(struct kimage *image) -{ - return 0; -} - -/* - * Undo anything leftover by machine_kexec_prepare - * when an image is freed. - */ -void machine_kexec_cleanup(struct kimage *image) -{ -} - -/* - * Do not allocate memory (or fail in any way) in machine_kexec(). - * We are past the point of no return, committed to rebooting now. - */ -NORET_TYPE void machine_kexec(struct kimage *image) -{ - unsigned long page_list[PAGES_NR]; - void *control_page; - - /* Interrupts aren't acceptable while we reboot */ - local_irq_disable(); - - control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE); - - page_list[PA_CONTROL_PAGE] = __pa(control_page); - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; - page_list[PA_PGD] = __pa(kexec_pgd); - page_list[VA_PGD] = (unsigned long)kexec_pgd; -#ifdef CONFIG_X86_PAE - page_list[PA_PMD_0] = __pa(kexec_pmd0); - page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; - page_list[PA_PMD_1] = __pa(kexec_pmd1); - page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; -#endif - page_list[PA_PTE_0] = __pa(kexec_pte0); - page_list[VA_PTE_0] = (unsigned long)kexec_pte0; - page_list[PA_PTE_1] = __pa(kexec_pte1); - page_list[VA_PTE_1] = (unsigned long)kexec_pte1; - - /* The segment registers are funny things, they have both a - * visible and an invisible part. Whenever the visible part is - * set to a specific selector, the invisible part is loaded - * with from a table in memory. At no other time is the - * descriptor table in memory accessed. - * - * I take advantage of this here by force loading the - * segments, before I zap the gdt with an invalid value. - */ - load_segments(); - /* The gdt & idt are now invalid. - * If you want to load them you must set up your own idt & gdt. - */ - set_gdt(phys_to_virt(0),0); - set_idt(phys_to_virt(0),0); - - /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start, cpu_has_pae); -} - -/* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never sets it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ -static int __init parse_crashkernel(char *arg) -{ - unsigned long size, base; - size = memparse(arg, &arg); - if (*arg == '@') { - base = memparse(arg+1, &arg); - /* FIXME: Do I want a sanity check - * to validate the memory range? - */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - return 0; -} -early_param("crashkernel", parse_crashkernel); diff --git a/arch/i386/kernel/mca_32.c b/arch/i386/kernel/mca_32.c deleted file mode 100644 index b83672b..0000000 --- a/arch/i386/kernel/mca_32.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * linux/arch/i386/kernel/mca.c - * Written by Martin Kolinek, February 1996 - * - * Changes: - * - * Chris Beauregard July 28th, 1996 - * - Fixed up integrated SCSI detection - * - * Chris Beauregard August 3rd, 1996 - * - Made mca_info local - * - Made integrated registers accessible through standard function calls - * - Added name field - * - More sanity checking - * - * Chris Beauregard August 9th, 1996 - * - Rewrote /proc/mca - * - * Chris Beauregard January 7th, 1997 - * - Added basic NMI-processing - * - Added more information to mca_info structure - * - * David Weinehall October 12th, 1998 - * - Made a lot of cleaning up in the source - * - Added use of save_flags / restore_flags - * - Added the 'driver_loaded' flag in MCA_adapter - * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter - * - * David Weinehall March 24th, 1999 - * - Fixed the output of 'Driver Installed' in /proc/mca/pos - * - Made the Integrated Video & SCSI show up even if they have id 0000 - * - * Alexander Viro November 9th, 1999 - * - Switched to regular procfs methods - * - * Alfred Arnold & David Weinehall August 23rd, 2000 - * - Added support for Planar POS-registers - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static unsigned char which_scsi = 0; - -int MCA_bus = 0; -EXPORT_SYMBOL(MCA_bus); - -/* - * Motherboard register spinlock. Untested on SMP at the moment, but - * are there any MCA SMP boxes? - * - * Yes - Alan - */ -static DEFINE_SPINLOCK(mca_lock); - -/* Build the status info for the adapter */ - -static void mca_configure_adapter_status(struct mca_device *mca_dev) { - mca_dev->status = MCA_ADAPTER_NONE; - - mca_dev->pos_id = mca_dev->pos[0] - + (mca_dev->pos[1] << 8); - - if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) { - - /* id = 0x0000 usually indicates hardware failure, - * however, ZP Gu (zpg@castle.net> reports that his 9556 - * has 0x0000 as id and everything still works. There - * also seem to be an adapter with id = 0x0000; the - * NCR Parallel Bus Memory Card. Until this is confirmed, - * however, this code will stay. - */ - - mca_dev->status = MCA_ADAPTER_ERROR; - - return; - } else if(mca_dev->pos_id != 0xffff) { - - /* 0xffff usually indicates that there's no adapter, - * however, some integrated adapters may have 0xffff as - * their id and still be valid. Examples are on-board - * VGA of the 55sx, the integrated SCSI of the 56 & 57, - * and possibly also the 95 ULTIMEDIA. - */ - - mca_dev->status = MCA_ADAPTER_NORMAL; - } - - if((mca_dev->pos_id == 0xffff || - mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) { - int j; - - for(j = 2; j < 8; j++) { - if(mca_dev->pos[j] != 0xff) { - mca_dev->status = MCA_ADAPTER_NORMAL; - break; - } - } - } - - if(!(mca_dev->pos[2] & MCA_ENABLED)) { - - /* enabled bit is in POS 2 */ - - mca_dev->status = MCA_ADAPTER_DISABLED; - } -} /* mca_configure_adapter_status */ - -/*--------------------------------------------------------------------*/ - -static struct resource mca_standard_resources[] = { - { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" }, - { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" }, - { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" }, - { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" }, - { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" }, - { .start = 0x96, .end = 0x97, .name = "POS (MCA)" }, - { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } -}; - -#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) - -/** - * mca_read_and_store_pos - read the POS registers into a memory buffer - * @pos: a char pointer to 8 bytes, contains the POS register value on - * successful return - * - * Returns 1 if a card actually exists (i.e. the pos isn't - * all 0xff) or 0 otherwise - */ -static int mca_read_and_store_pos(unsigned char *pos) { - int j; - int found = 0; - - for(j=0; j<8; j++) { - if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) { - /* 0xff all across means no device. 0x00 means - * something's broken, but a device is - * probably there. However, if you get 0x00 - * from a motherboard register it won't matter - * what we find. For the record, on the - * 57SLC, the integrated SCSI adapter has - * 0xffff for the adapter ID, but nonzero for - * other registers. */ - - found = 1; - } - } - return found; -} - -static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg) -{ - unsigned char byte; - unsigned long flags; - - if(reg < 0 || reg >= 8) - return 0; - - spin_lock_irqsave(&mca_lock, flags); - if(mca_dev->pos_register) { - /* Disable adapter setup, enable motherboard setup */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - } else { - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read the appropriate register */ - - outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG); - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - } - spin_unlock_irqrestore(&mca_lock, flags); - - mca_dev->pos[reg] = byte; - - return byte; -} - -static void mca_pc_write_pos(struct mca_device *mca_dev, int reg, - unsigned char byte) -{ - unsigned long flags; - - if(reg < 0 || reg >= 8) - return; - - spin_lock_irqsave(&mca_lock, flags); - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read in the appropriate register */ - - outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG); - outb_p(byte, MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - - spin_unlock_irqrestore(&mca_lock, flags); - - /* Update the global register list, while we have the byte */ - - mca_dev->pos[reg] = byte; - -} - -/* for the primary MCA bus, we have identity transforms */ -static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq) -{ - return irq; -} - -static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port) -{ - return port; -} - -static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem) -{ - return mem; -} - - -static int __init mca_init(void) -{ - unsigned int i, j; - struct mca_device *mca_dev; - unsigned char pos[8]; - short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00}; - struct mca_bus *bus; - - /* WARNING: Be careful when making changes here. Putting an adapter - * and the motherboard simultaneously into setup mode may result in - * damage to chips (according to The Indispensible PC Hardware Book - * by Hans-Peter Messmer). Also, we disable system interrupts (so - * that we are not disturbed in the middle of this). - */ - - /* Make sure the MCA bus is present */ - - if (mca_system_init()) { - printk(KERN_ERR "MCA bus system initialisation failed\n"); - return -ENODEV; - } - - if (!MCA_bus) - return -ENODEV; - - printk(KERN_INFO "Micro Channel bus detected.\n"); - - /* All MCA systems have at least a primary bus */ - bus = mca_attach_bus(MCA_PRIMARY_BUS); - if (!bus) - goto out_nomem; - bus->default_dma_mask = 0xffffffffLL; - bus->f.mca_write_pos = mca_pc_write_pos; - bus->f.mca_read_pos = mca_pc_read_pos; - bus->f.mca_transform_irq = mca_dummy_transform_irq; - bus->f.mca_transform_ioport = mca_dummy_transform_ioport; - bus->f.mca_transform_memory = mca_dummy_transform_memory; - - /* get the motherboard device */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL); - if(unlikely(!mca_dev)) - goto out_nomem; - - /* - * We do not expect many MCA interrupts during initialization, - * but let us be safe: - */ - spin_lock_irq(&mca_lock); - - /* Make sure adapter setup is off */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Read motherboard POS registers */ - - mca_dev->pos_register = 0x7f; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for a motherboard */ - mca_dev->pos_id = MCA_MOTHERBOARD_POS; - mca_dev->slot = MCA_MOTHERBOARD; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if(unlikely(!mca_dev)) - goto out_unlock_nomem; - - /* Put motherboard into video setup mode, read integrated video - * POS registers, and turn motherboard setup off. - */ - - mca_dev->pos_register = 0xdf; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for the integrated video */ - mca_dev->pos_id = MCA_INTEGVIDEO_POS; - mca_dev->slot = MCA_INTEGVIDEO; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - /* Put motherboard into scsi setup mode, read integrated scsi - * POS registers, and turn motherboard setup off. - * - * It seems there are two possible SCSI registers. Martin says that - * for the 56,57, 0xf7 is the one, but fails on the 76. - * Alfredo (apena@vnet.ibm.com) says - * 0xfd works on his machine. We'll try both of them. I figure it's - * a good bet that only one could be valid at a time. This could - * screw up though if one is used for something else on the other - * machine. - */ - - for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) { - outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG); - if(mca_read_and_store_pos(pos)) - break; - } - if(which_scsi) { - /* found a scsi card */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if(unlikely(!mca_dev)) - goto out_unlock_nomem; - - for(j = 0; j < 8; j++) - mca_dev->pos[j] = pos[j]; - - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for integrated SCSI controller */ - mca_dev->pos_id = MCA_INTEGSCSI_POS; - mca_dev->slot = MCA_INTEGSCSI; - mca_dev->pos_register = which_scsi; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - - /* Turn off motherboard setup */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Now loop over MCA slots: put each adapter into setup mode, and - * read its POS registers. Then put adapter setup off. - */ - - for(i=0; ipos[j]=pos[j]; - - mca_dev->driver_loaded = 0; - mca_dev->slot = i; - mca_dev->pos_register = 0; - mca_configure_adapter_status(mca_dev); - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Enable interrupts and return memory start */ - spin_unlock_irq(&mca_lock); - - for (i = 0; i < MCA_STANDARD_RESOURCES; i++) - request_resource(&ioport_resource, mca_standard_resources + i); - - mca_do_proc_init(); - - return 0; - - out_unlock_nomem: - spin_unlock_irq(&mca_lock); - out_nomem: - printk(KERN_EMERG "Failed memory allocation in MCA setup!\n"); - return -ENOMEM; -} - -subsys_initcall(mca_init); - -/*--------------------------------------------------------------------*/ - -static __kprobes void -mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) -{ - int slot = mca_dev->slot; - - if(slot == MCA_INTEGSCSI) { - printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n", - mca_dev->name); - } else if(slot == MCA_INTEGVIDEO) { - printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n", - mca_dev->name); - } else if(slot == MCA_MOTHERBOARD) { - printk(KERN_CRIT "NMI: caused by motherboard (%s)\n", - mca_dev->name); - } - - /* More info available in POS 6 and 7? */ - - if(check_flag) { - unsigned char pos6, pos7; - - pos6 = mca_device_read_pos(mca_dev, 6); - pos7 = mca_device_read_pos(mca_dev, 7); - - printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7); - } - -} /* mca_handle_nmi_slot */ - -/*--------------------------------------------------------------------*/ - -static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) -{ - struct mca_device *mca_dev = to_mca_device(dev); - unsigned char pos5; - - pos5 = mca_device_read_pos(mca_dev, 5); - - if(!(pos5 & 0x80)) { - /* Bit 7 of POS 5 is reset when this adapter has a hardware - * error. Bit 7 it reset if there's error information - * available in POS 6 and 7. - */ - mca_handle_nmi_device(mca_dev, !(pos5 & 0x40)); - return 1; - } - return 0; -} - -void __kprobes mca_handle_nmi(void) -{ - /* First try - scan the various adapters and see if a specific - * adapter was responsible for the error. - */ - bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback); - - mca_nmi_hook(); -} /* mca_handle_nmi */ diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c deleted file mode 100644 index 09cf781..0000000 --- a/arch/i386/kernel/microcode.c +++ /dev/null @@ -1,850 +0,0 @@ -/* - * Intel CPU Microcode Update Driver for Linux - * - * Copyright (C) 2000-2006 Tigran Aivazian - * 2006 Shaohua Li - * - * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, - * Pentium III, Xeon, Pentium 4, etc. - * - * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, - * Order Number 245472 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/245472.htm - * - * For more information, go to http://www.urbanmyth.org/microcode - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 16 Feb 2000, Tigran Aivazian - * Initial release. - * 1.01 18 Feb 2000, Tigran Aivazian - * Added read() support + cleanups. - * 1.02 21 Feb 2000, Tigran Aivazian - * Added 'device trimming' support. open(O_WRONLY) zeroes - * and frees the saved copy of applied microcode. - * 1.03 29 Feb 2000, Tigran Aivazian - * Made to use devfs (/dev/cpu/microcode) + cleanups. - * 1.04 06 Jun 2000, Simon Trimmer - * Added misc device support (now uses both devfs and misc). - * Added MICROCODE_IOCFREE ioctl to clear memory. - * 1.05 09 Jun 2000, Simon Trimmer - * Messages for error cases (non Intel & no suitable microcode). - * 1.06 03 Aug 2000, Tigran Aivazian - * Removed ->release(). Removed exclusive open and status bitmap. - * Added microcode_rwsem to serialize read()/write()/ioctl(). - * Removed global kernel lock usage. - * 1.07 07 Sep 2000, Tigran Aivazian - * Write 0 to 0x8B msr and then cpuid before reading revision, - * so that it works even if there were no update done by the - * BIOS. Otherwise, reading from 0x8B gives junk (which happened - * to be 0 on my machine which is why it worked even when I - * disabled update by the BIOS) - * Thanks to Eric W. Biederman for the fix. - * 1.08 11 Dec 2000, Richard Schaal and - * Tigran Aivazian - * Intel Pentium 4 processor support and bugfixes. - * 1.09 30 Oct 2001, Tigran Aivazian - * Bugfix for HT (Hyper-Threading) enabled processors - * whereby processor resources are shared by all logical processors - * in a single CPU package. - * 1.10 28 Feb 2002 Asit K Mallick and - * Tigran Aivazian , - * Serialize updates as required on HT processors due to speculative - * nature of implementation. - * 1.11 22 Mar 2002 Tigran Aivazian - * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble , - * Jun Nakajima - * Support for the microcode updates in the new format. - * 1.13 10 Oct 2003 Tigran Aivazian - * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode - * in kernel memory. - * 1.14 25 Jun 2004 Tigran Aivazian - * Fix sigmatch() macro to handle old CPUs with pf == 0. - * Thanks to Stuart Swales for pointing out this bug. - */ - -//#define DEBUG /* pr_debug */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); -MODULE_AUTHOR("Tigran Aivazian "); -MODULE_LICENSE("GPL"); - -#define MICROCODE_VERSION "1.14a" - -#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ -#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */ -#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */ -#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */ -#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */ -#define DWSIZE (sizeof (u32)) -#define get_totalsize(mc) \ - (((microcode_t *)mc)->hdr.totalsize ? \ - ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE) -#define get_datasize(mc) \ - (((microcode_t *)mc)->hdr.datasize ? \ - ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) - -#define sigmatch(s1, s2, p1, p2) \ - (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) - -#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) - -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK(microcode_update_lock); - -/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ -static DEFINE_MUTEX(microcode_mutex); - -static struct ucode_cpu_info { - int valid; - unsigned int sig; - unsigned int pf; - unsigned int rev; - microcode_t *mc; -} ucode_cpu_info[NR_CPUS]; - -static void collect_cpu_info(int cpu_num) -{ - struct cpuinfo_x86 *c = cpu_data + cpu_num; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - unsigned int val[2]; - - /* We should bind the task to the CPU */ - BUG_ON(raw_smp_processor_id() != cpu_num); - uci->pf = uci->rev = 0; - uci->mc = NULL; - uci->valid = 1; - - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel " - "processor\n", cpu_num); - uci->valid = 0; - return; - } - - uci->sig = cpuid_eax(0x00000001); - - if ((c->x86_model >= 5) || (c->x86 > 6)) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - uci->pf = 1 << ((val[1] >> 18) & 7); - } - - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev); - pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", - uci->sig, uci->pf, uci->rev); -} - -static inline int microcode_update_match(int cpu_num, - microcode_header_t *mc_header, int sig, int pf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - if (!sigmatch(sig, uci->sig, pf, uci->pf) - || mc_header->rev <= uci->rev) - return 0; - return 1; -} - -static int microcode_sanity_check(void *mc) -{ - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header = NULL; - struct extended_signature *ext_sig; - unsigned long total_size, data_size, ext_table_size; - int sum, orig_sum, ext_sigcount = 0, i; - - total_size = get_totalsize(mc_header); - data_size = get_datasize(mc_header); - if (data_size + MC_HEADER_SIZE > total_size) { - printk(KERN_ERR "microcode: error! " - "Bad data size in microcode data file\n"); - return -EINVAL; - } - - if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { - printk(KERN_ERR "microcode: error! " - "Unknown microcode update format\n"); - return -EINVAL; - } - ext_table_size = total_size - (MC_HEADER_SIZE + data_size); - if (ext_table_size) { - if ((ext_table_size < EXT_HEADER_SIZE) - || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! " - "Small exttable size in microcode data file\n"); - return -EINVAL; - } - ext_header = mc + MC_HEADER_SIZE + data_size; - if (ext_table_size != exttable_size(ext_header)) { - printk(KERN_ERR "microcode: error! " - "Bad exttable size in microcode data file\n"); - return -EFAULT; - } - ext_sigcount = ext_header->count; - } - - /* check extended table checksum */ - if (ext_table_size) { - int ext_table_sum = 0; - int *ext_tablep = (int *)ext_header; - - i = ext_table_size / DWSIZE; - while (i--) - ext_table_sum += ext_tablep[i]; - if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, " - "bad extended signature table checksum\n"); - return -EINVAL; - } - } - - /* calculate the checksum */ - orig_sum = 0; - i = (MC_HEADER_SIZE + data_size) / DWSIZE; - while (i--) - orig_sum += ((int *)mc)[i]; - if (orig_sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - if (!ext_table_size) - return 0; - /* check extended signature checksum */ - for (i = 0; i < ext_sigcount; i++) { - ext_sig = (struct extended_signature *)((void *)ext_header - + EXT_HEADER_SIZE + EXT_SIGNATURE_SIZE * i); - sum = orig_sum - - (mc_header->sig + mc_header->pf + mc_header->cksum) - + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); - if (sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - } - return 0; -} - -/* - * return 0 - no update found - * return 1 - found update - * return < 0 - error - */ -static int get_maching_microcode(void *mc, int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header; - unsigned long total_size = get_totalsize(mc_header); - int ext_sigcount, i; - struct extended_signature *ext_sig; - void *new_mc; - - if (microcode_update_match(cpu, mc_header, - mc_header->sig, mc_header->pf)) - goto find; - - if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) - return 0; - - ext_header = (struct extended_sigtable *)(mc + - get_datasize(mc_header) + MC_HEADER_SIZE); - ext_sigcount = ext_header->count; - ext_sig = (struct extended_signature *)((void *)ext_header - + EXT_HEADER_SIZE); - for (i = 0; i < ext_sigcount; i++) { - if (microcode_update_match(cpu, mc_header, - ext_sig->sig, ext_sig->pf)) - goto find; - ext_sig++; - } - return 0; -find: - pr_debug("microcode: CPU %d found a matching microcode update with" - " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev); - new_mc = vmalloc(total_size); - if (!new_mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - - /* free previous update file */ - vfree(uci->mc); - - memcpy(new_mc, mc, total_size); - uci->mc = new_mc; - return 1; -} - -static void apply_microcode(int cpu) -{ - unsigned long flags; - unsigned int val[2]; - int cpu_num = raw_smp_processor_id(); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - /* We should bind the task to the CPU */ - BUG_ON(cpu_num != cpu); - - if (uci->mc == NULL) - return; - - /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); - - /* write microcode via MSR 0x79 */ - wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, - (unsigned long) uci->mc->bits >> 16 >> 16); - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - - spin_unlock_irqrestore(µcode_update_lock, flags); - if (val[1] != uci->mc->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d updated from revision " - "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]); - return; - } - pr_debug("microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", - cpu_num, uci->rev, val[1], uci->mc->hdr.date); - uci->rev = val[1]; -} - -#ifdef CONFIG_MICROCODE_OLD_INTERFACE -static void __user *user_buffer; /* user area microcode data buffer */ -static unsigned int user_buffer_size; /* it's size */ - -static long get_next_ucode(void **mc, long offset) -{ - microcode_header_t mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= user_buffer_size) - return 0; - if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - return -EFAULT; - } - total_size = get_totalsize(&mc_header); - if (offset + total_size > user_buffer_size) { - printk(KERN_ERR "microcode: error! Bad total size in microcode " - "data file\n"); - return -EINVAL; - } - *mc = vmalloc(total_size); - if (!*mc) - return -ENOMEM; - if (copy_from_user(*mc, user_buffer + offset, total_size)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - vfree(*mc); - return -EFAULT; - } - return offset + total_size; -} - -static int do_microcode_update (void) -{ - long cursor = 0; - int error = 0; - void *new_mc = NULL; - int cpu; - cpumask_t old; - - old = current->cpus_allowed; - - while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) { - error = microcode_sanity_check(new_mc); - if (error) - goto out; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - for_each_online_cpu(cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!uci->valid) - continue; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - error = get_maching_microcode(new_mc, cpu); - if (error < 0) - goto out; - if (error == 1) - apply_microcode(cpu); - } - vfree(new_mc); - } -out: - if (cursor > 0) - vfree(new_mc); - if (cursor < 0) - error = cursor; - set_cpus_allowed(current, old); - return error; -} - -static int microcode_open (struct inode *unused1, struct file *unused2) -{ - return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; -} - -static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) -{ - ssize_t ret; - - if ((len >> PAGE_SHIFT) > num_physpages) { - printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages); - return -EINVAL; - } - - lock_cpu_hotplug(); - mutex_lock(µcode_mutex); - - user_buffer = (void __user *) buf; - user_buffer_size = (int) len; - - ret = do_microcode_update(); - if (!ret) - ret = (ssize_t)len; - - mutex_unlock(µcode_mutex); - unlock_cpu_hotplug(); - - return ret; -} - -static const struct file_operations microcode_fops = { - .owner = THIS_MODULE, - .write = microcode_write, - .open = microcode_open, -}; - -static struct miscdevice microcode_dev = { - .minor = MICROCODE_MINOR, - .name = "microcode", - .fops = µcode_fops, -}; - -static int __init microcode_dev_init (void) -{ - int error; - - error = misc_register(µcode_dev); - if (error) { - printk(KERN_ERR - "microcode: can't misc_register on minor=%d\n", - MICROCODE_MINOR); - return error; - } - - return 0; -} - -static void microcode_dev_exit (void) -{ - misc_deregister(µcode_dev); -} - -MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); -#else -#define microcode_dev_init() 0 -#define microcode_dev_exit() do { } while(0) -#endif - -static long get_next_ucode_from_buffer(void **mc, void *buf, - unsigned long size, long offset) -{ - microcode_header_t *mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= size) - return 0; - mc_header = (microcode_header_t *)(buf + offset); - total_size = get_totalsize(mc_header); - - if (offset + total_size > size) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - return -EINVAL; - } - - *mc = vmalloc(total_size); - if (!*mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - memcpy(*mc, buf + offset, total_size); - return offset + total_size; -} - -/* fake device for request_firmware */ -static struct platform_device *microcode_pdev; - -static int cpu_request_microcode(int cpu) -{ - char name[30]; - struct cpuinfo_x86 *c = cpu_data + cpu; - const struct firmware *firmware; - void *buf; - unsigned long size; - long offset = 0; - int error; - void *mc; - - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); - sprintf(name,"intel-ucode/%02x-%02x-%02x", - c->x86, c->x86_model, c->x86_mask); - error = request_firmware(&firmware, name, µcode_pdev->dev); - if (error) { - pr_debug("ucode data file %s load failed\n", name); - return error; - } - buf = (void *)firmware->data; - size = firmware->size; - while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) - > 0) { - error = microcode_sanity_check(mc); - if (error) - break; - error = get_maching_microcode(mc, cpu); - if (error < 0) - break; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - if (error == 1) { - apply_microcode(cpu); - error = 0; - } - vfree(mc); - } - if (offset > 0) - vfree(mc); - if (offset < 0) - error = offset; - release_firmware(firmware); - - return error; -} - -static int apply_microcode_check_cpu(int cpu) -{ - struct cpuinfo_x86 *c = cpu_data + cpu; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - cpumask_t old; - unsigned int val[2]; - int err = 0; - - /* Check if the microcode is available */ - if (!uci->mc) - return 0; - - old = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - - /* Check if the microcode we have in memory matches the CPU */ - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001)) - err = -EINVAL; - - if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - if (uci->pf != (1 << ((val[1] >> 18) & 7))) - err = -EINVAL; - } - - if (!err) { - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - if (uci->rev != val[1]) - err = -EINVAL; - } - - if (!err) - apply_microcode(cpu); - else - printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:" - " sig=0x%x, pf=0x%x, rev=0x%x\n", - cpu, uci->sig, uci->pf, uci->rev); - - set_cpus_allowed(current, old); - return err; -} - -static void microcode_init_cpu(int cpu, int resume) -{ - cpumask_t old; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - old = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - mutex_lock(µcode_mutex); - collect_cpu_info(cpu); - if (uci->valid && system_state == SYSTEM_RUNNING && !resume) - cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - set_cpus_allowed(current, old); -} - -static void microcode_fini_cpu(int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - mutex_lock(µcode_mutex); - uci->valid = 0; - vfree(uci->mc); - uci->mc = NULL; - mutex_unlock(µcode_mutex); -} - -static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - char *end; - unsigned long val = simple_strtoul(buf, &end, 0); - int err = 0; - int cpu = dev->id; - - if (end == buf) - return -EINVAL; - if (val == 1) { - cpumask_t old; - - old = current->cpus_allowed; - - lock_cpu_hotplug(); - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - - mutex_lock(µcode_mutex); - if (uci->valid) - err = cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - unlock_cpu_hotplug(); - set_cpus_allowed(current, old); - } - if (err) - return err; - return sz; -} - -static ssize_t version_show(struct sys_device *dev, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->rev); -} - -static ssize_t pf_show(struct sys_device *dev, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->pf); -} - -static SYSDEV_ATTR(reload, 0200, NULL, reload_store); -static SYSDEV_ATTR(version, 0400, version_show, NULL); -static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); - -static struct attribute *mc_default_attrs[] = { - &attr_reload.attr, - &attr_version.attr, - &attr_processor_flags.attr, - NULL -}; - -static struct attribute_group mc_attr_group = { - .attrs = mc_default_attrs, - .name = "microcode", -}; - -static int __mc_sysdev_add(struct sys_device *sys_dev, int resume) -{ - int err, cpu = sys_dev->id; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("Microcode:CPU %d added\n", cpu); - memset(uci, 0, sizeof(*uci)); - - err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); - if (err) - return err; - - microcode_init_cpu(cpu, resume); - - return 0; -} - -static int mc_sysdev_add(struct sys_device *sys_dev) -{ - return __mc_sysdev_add(sys_dev, 0); -} - -static int mc_sysdev_remove(struct sys_device *sys_dev) -{ - int cpu = sys_dev->id; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("Microcode:CPU %d removed\n", cpu); - microcode_fini_cpu(cpu); - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - return 0; -} - -static int mc_sysdev_resume(struct sys_device *dev) -{ - int cpu = dev->id; - - if (!cpu_online(cpu)) - return 0; - pr_debug("Microcode:CPU %d resumed\n", cpu); - /* only CPU 0 will apply ucode here */ - apply_microcode(0); - return 0; -} - -static struct sysdev_driver mc_sysdev_driver = { - .add = mc_sysdev_add, - .remove = mc_sysdev_remove, - .resume = mc_sysdev_resume, -}; - -static __cpuinit int -mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; - - sys_dev = get_cpu_sysdev(cpu); - switch (action) { - case CPU_UP_CANCELED_FROZEN: - /* The CPU refused to come up during a system resume */ - microcode_fini_cpu(cpu); - break; - case CPU_ONLINE: - case CPU_DOWN_FAILED: - mc_sysdev_add(sys_dev); - break; - case CPU_ONLINE_FROZEN: - /* System-wide resume is in progress, try to apply microcode */ - if (apply_microcode_check_cpu(cpu)) { - /* The application of microcode failed */ - microcode_fini_cpu(cpu); - __mc_sysdev_add(sys_dev, 1); - break; - } - case CPU_DOWN_FAILED_FROZEN: - if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - printk(KERN_ERR "Microcode: Failed to create the sysfs " - "group for CPU%d\n", cpu); - break; - case CPU_DOWN_PREPARE: - mc_sysdev_remove(sys_dev); - break; - case CPU_DOWN_PREPARE_FROZEN: - /* Suspend is in progress, only remove the interface */ - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata mc_cpu_notifier = { - .notifier_call = mc_cpu_callback, -}; - -static int __init microcode_init (void) -{ - int error; - - error = microcode_dev_init(); - if (error) - return error; - microcode_pdev = platform_device_register_simple("microcode", -1, - NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); - return PTR_ERR(microcode_pdev); - } - - lock_cpu_hotplug(); - error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); - unlock_cpu_hotplug(); - if (error) { - microcode_dev_exit(); - platform_device_unregister(microcode_pdev); - return error; - } - - register_hotcpu_notifier(&mc_cpu_notifier); - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " \n"); - return 0; -} - -static void __exit microcode_exit (void) -{ - microcode_dev_exit(); - - unregister_hotcpu_notifier(&mc_cpu_notifier); - - lock_cpu_hotplug(); - sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); - unlock_cpu_hotplug(); - - platform_device_unregister(microcode_pdev); -} - -module_init(microcode_init) -module_exit(microcode_exit) diff --git a/arch/i386/kernel/module_32.c b/arch/i386/kernel/module_32.c deleted file mode 100644 index 3db0a544..0000000 --- a/arch/i386/kernel/module_32.c +++ /dev/null @@ -1,152 +0,0 @@ -/* Kernel module help for i386. - Copyright (C) 2001 Rusty Russell. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ -#include -#include -#include -#include -#include -#include -#include - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc_exec(size); -} - - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -/* We don't need anything special. */ -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_386_32: - /* We add the value into the location given */ - *location += sym->st_value; - break; - case R_386_PC32: - /* Add the value, subtract its postition */ - *location += sym->st_value - (uint32_t)location; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n", - me->name); - return -ENOEXEC; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL, - *para = NULL; - char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - - for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { - if (!strcmp(".text", secstrings + s->sh_name)) - text = s; - if (!strcmp(".altinstructions", secstrings + s->sh_name)) - alt = s; - if (!strcmp(".smp_locks", secstrings + s->sh_name)) - locks= s; - if (!strcmp(".parainstructions", secstrings + s->sh_name)) - para = s; - } - - if (alt) { - /* patch .altinstructions */ - void *aseg = (void *)alt->sh_addr; - apply_alternatives(aseg, aseg + alt->sh_size); - } - if (locks && text) { - void *lseg = (void *)locks->sh_addr; - void *tseg = (void *)text->sh_addr; - alternatives_smp_module_add(me, me->name, - lseg, lseg + locks->sh_size, - tseg, tseg + text->sh_size); - } - - if (para) { - void *pseg = (void *)para->sh_addr; - apply_paravirt(pseg, pseg + para->sh_size); - } - - return module_bug_finalize(hdr, sechdrs, me); -} - -void module_arch_cleanup(struct module *mod) -{ - alternatives_smp_module_del(mod); - module_bug_cleanup(mod); -} diff --git a/arch/i386/kernel/mpparse_32.c b/arch/i386/kernel/mpparse_32.c deleted file mode 100644 index 13abb4e..0000000 --- a/arch/i386/kernel/mpparse_32.c +++ /dev/null @@ -1,1132 +0,0 @@ -/* - * Intel Multiprocessor Specification 1.1 and 1.4 - * compliant MP-table parsing routines. - * - * (c) 1995 Alan Cox, Building #3 - * (c) 1998, 1999, 2000 Ingo Molnar - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Have we found an MP table */ -int smp_found_config; -unsigned int __cpuinitdata maxcpus = NR_CPUS; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -int apic_version [MAX_APICS]; -int mp_bus_id_to_type [MAX_MP_BUSSES]; -int mp_bus_id_to_node [MAX_MP_BUSSES]; -int mp_bus_id_to_local [MAX_MP_BUSSES]; -int quad_local_to_mp_bus_id [NR_CPUS/4][4]; -int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; -static int mp_current_pci_id; - -/* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; - -/* # of MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* MP IRQ source entries */ -int mp_irq_entries; - -int nr_ioapics; - -int pic_mode; -unsigned long mp_lapic_addr; - -unsigned int def_to_bigsmp = 0; - -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; -/* Internal processor count */ -unsigned int __cpuinitdata num_processors; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; - -u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; - -/* - * Intel MP BIOS table parsing routines: - */ - - -/* - * Checksum an MP configuration block. - */ - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ - -static int mpc_record; -static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata; - -static void __cpuinit MP_processor_info (struct mpc_config_processor *m) -{ - int ver, apicid; - physid_mask_t phys_cpu; - - if (!(m->mpc_cpuflag & CPU_ENABLED)) - return; - - apicid = mpc_apic_id(m, translation_table[mpc_record]); - - if (m->mpc_featureflag&(1<<0)) - Dprintk(" Floating point unit present.\n"); - if (m->mpc_featureflag&(1<<7)) - Dprintk(" Machine Exception supported.\n"); - if (m->mpc_featureflag&(1<<8)) - Dprintk(" 64 bit compare & exchange supported.\n"); - if (m->mpc_featureflag&(1<<9)) - Dprintk(" Internal APIC present.\n"); - if (m->mpc_featureflag&(1<<11)) - Dprintk(" SEP present.\n"); - if (m->mpc_featureflag&(1<<12)) - Dprintk(" MTRR present.\n"); - if (m->mpc_featureflag&(1<<13)) - Dprintk(" PGE present.\n"); - if (m->mpc_featureflag&(1<<14)) - Dprintk(" MCA present.\n"); - if (m->mpc_featureflag&(1<<15)) - Dprintk(" CMOV present.\n"); - if (m->mpc_featureflag&(1<<16)) - Dprintk(" PAT present.\n"); - if (m->mpc_featureflag&(1<<17)) - Dprintk(" PSE present.\n"); - if (m->mpc_featureflag&(1<<18)) - Dprintk(" PSN present.\n"); - if (m->mpc_featureflag&(1<<19)) - Dprintk(" Cache Line Flush Instruction present.\n"); - /* 20 Reserved */ - if (m->mpc_featureflag&(1<<21)) - Dprintk(" Debug Trace and EMON Store present.\n"); - if (m->mpc_featureflag&(1<<22)) - Dprintk(" ACPI Thermal Throttle Registers present.\n"); - if (m->mpc_featureflag&(1<<23)) - Dprintk(" MMX present.\n"); - if (m->mpc_featureflag&(1<<24)) - Dprintk(" FXSR present.\n"); - if (m->mpc_featureflag&(1<<25)) - Dprintk(" XMM present.\n"); - if (m->mpc_featureflag&(1<<26)) - Dprintk(" Willamette New Instructions present.\n"); - if (m->mpc_featureflag&(1<<27)) - Dprintk(" Self Snoop present.\n"); - if (m->mpc_featureflag&(1<<28)) - Dprintk(" HT present.\n"); - if (m->mpc_featureflag&(1<<29)) - Dprintk(" Thermal Monitor present.\n"); - /* 30, 31 Reserved */ - - - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - Dprintk(" Bootup CPU\n"); - boot_cpu_physical_apicid = m->mpc_apicid; - } - - ver = m->mpc_apicver; - - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - m->mpc_apicid); - ver = 0x10; - } - apic_version[m->mpc_apicid] = ver; - - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - - cpu_set(num_processors, cpu_possible_map); - num_processors++; - - /* - * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y - * but we need to work other dependencies like SMP_SUSPEND etc - * before this can be done without some confusion. - * if (CPU_HOTPLUG_ENABLED || num_processors > 8) - * - Ashok Raj - */ - if (num_processors > 8) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (!APIC_XAPIC(ver)) { - def_to_bigsmp = 0; - break; - } - /* If P4 and above fall through */ - case X86_VENDOR_AMD: - def_to_bigsmp = 1; - } - } - bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; -} - -static void __init MP_bus_info (struct mpc_config_bus *m) -{ - char str[7]; - - memcpy(str, m->mpc_bustype, 6); - str[6] = 0; - - mpc_oem_bus_info(m, str, translation_table[mpc_record]); - -#if MAX_MP_BUSSES < 256 - if (m->mpc_busid >= MAX_MP_BUSSES) { - printk(KERN_WARNING "MP table busid value (%d) for bustype %s " - " is too large, max. supported is %d\n", - m->mpc_busid, str, MAX_MP_BUSSES - 1); - return; - } -#endif - - if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; - } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; - } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) { - mpc_oem_pci_bus(m, translation_table[mpc_record]); - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; - } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; - } else { - printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); - } -} - -static void __init MP_ioapic_info (struct mpc_config_ioapic *m) -{ - if (!(m->mpc_flags & MPC_APIC_USABLE)) - return; - - printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n", - m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n", - MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); - } - if (!m->mpc_apicaddr) { - printk(KERN_ERR "WARNING: bogus zero I/O APIC address" - " found in MP table, skipping!\n"); - return; - } - mp_ioapics[nr_ioapics] = *m; - nr_ioapics++; -} - -static void __init MP_intsrc_info (struct mpc_config_intsrc *m) -{ - mp_irqs [mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, - m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - -static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) -{ - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); -} - -#ifdef CONFIG_X86_NUMAQ -static void __init MP_translation_info (struct mpc_config_translation *m) -{ - printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local); - - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); -} - -/* - * Read/parse the MPC oem tables - */ - -static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \ - unsigned short oemsize) -{ - int count = sizeof (*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable)+count; - - mpc_record = 0; - printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable); - if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4)) - { - printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->oem_signature[0], - oemtable->oem_signature[1], - oemtable->oem_signature[2], - oemtable->oem_signature[3]); - return; - } - if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length)) - { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - while (count < oemtable->oem_length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_config_translation *m= - (struct mpc_config_translation *)oemptr; - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - { - printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr); - return; - } - } - } -} - -static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid) -{ - if (strncmp(oem, "IBM NUMA", 8)) - printk("Warning! May not be a NUMA-Q system!\n"); - if (mpc->mpc_oemptr) - smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr, - mpc->mpc_oemsize); -} -#endif /* CONFIG_X86_NUMAQ */ - -/* - * Read/parse the MPC - */ - -static int __init smp_read_mpc(struct mp_config_table *mpc) -{ - char str[16]; - char oem[10]; - int count=sizeof(*mpc); - unsigned char *mpt=((unsigned char *)mpc)+count; - - if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n", - *(u32 *)mpc->mpc_signature); - return 0; - } - if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk(KERN_ERR "SMP mptable: checksum error!\n"); - return 0; - } - if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n", - mpc->mpc_spec); - return 0; - } - if (!mpc->mpc_lapic) { - printk(KERN_ERR "SMP mptable: null local APIC address!\n"); - return 0; - } - memcpy(oem,mpc->mpc_oem,8); - oem[8]=0; - printk(KERN_INFO "OEM ID: %s ",oem); - - memcpy(str,mpc->mpc_productid,12); - str[12]=0; - printk("Product ID: %s ",str); - - mps_oem_check(mpc, oem, str); - - printk("APIC at: 0x%lX\n",mpc->mpc_lapic); - - /* - * Save the local APIC address (it might be non-default) -- but only - * if we're not using ACPI. - */ - if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; - - /* - * Now process the configuration blocks. - */ - mpc_record = 0; - while (count < mpc->mpc_length) { - switch(*mpt) { - case MP_PROCESSOR: - { - struct mpc_config_processor *m= - (struct mpc_config_processor *)mpt; - /* ACPI may have already provided this data */ - if (!acpi_lapic) - MP_processor_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_BUS: - { - struct mpc_config_bus *m= - (struct mpc_config_bus *)mpt; - MP_bus_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_IOAPIC: - { - struct mpc_config_ioapic *m= - (struct mpc_config_ioapic *)mpt; - MP_ioapic_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - case MP_INTSRC: - { - struct mpc_config_intsrc *m= - (struct mpc_config_intsrc *)mpt; - - MP_intsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - case MP_LINTSRC: - { - struct mpc_config_lintsrc *m= - (struct mpc_config_lintsrc *)mpt; - MP_lintsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - default: - { - count = mpc->mpc_length; - break; - } - } - ++mpc_record; - } - setup_apic_routing(); - if (!num_processors) - printk(KERN_ERR "SMP mptable: no processors registered!\n"); - return num_processors; -} - -static int __init ELCR_trigger(unsigned int irq) -{ - unsigned int port; - - port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; -} - -static void __init construct_default_ioirq_mptable(int mpc_default_type) -{ - struct mpc_config_intsrc intsrc; - int i; - int ELCR_fallback = 0; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* conforming */ - intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; - - intsrc.mpc_irqtype = mp_INT; - - /* - * If true, we have an ISA/PCI system with no IRQ entries - * in the MP table. To prevent the PCI interrupts from being set up - * incorrectly, we try to use the ELCR. The sanity check to see if - * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can - * never be level sensitive, so we simply see if the ELCR agrees. - * If it does, we assume it's valid. - */ - if (mpc_default_type == 5) { - printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); - - if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) - printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n"); - else { - printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); - ELCR_fallback = 1; - } - } - - for (i = 0; i < 16; i++) { - switch (mpc_default_type) { - case 2: - if (i == 0 || i == 13) - continue; /* IRQ0 & IRQ13 not connected */ - /* fall through */ - default: - if (i == 2) - continue; /* IRQ2 is never connected */ - } - - if (ELCR_fallback) { - /* - * If the ELCR indicates a level-sensitive interrupt, we - * copy that information over to the MP table in the - * irqflag field (level sensitive, active high polarity). - */ - if (ELCR_trigger(i)) - intsrc.mpc_irqflag = 13; - else - intsrc.mpc_irqflag = 0; - } - - intsrc.mpc_srcbusirq = i; - intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); - } - - intsrc.mpc_irqtype = mp_ExtINT; - intsrc.mpc_srcbusirq = 0; - intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); -} - -static inline void __init construct_default_ISA_mptable(int mpc_default_type) -{ - struct mpc_config_processor processor; - struct mpc_config_bus bus; - struct mpc_config_ioapic ioapic; - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | - boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - switch (mpc_default_type) { - default: - printk("???\n"); - printk(KERN_ERR "Unknown standard configuration %d\n", - mpc_default_type); - /* fall through */ - case 1: - case 5: - memcpy(bus.mpc_bustype, "ISA ", 6); - break; - case 2: - case 6: - case 3: - memcpy(bus.mpc_bustype, "EISA ", 6); - break; - case 4: - case 7: - memcpy(bus.mpc_bustype, "MCA ", 6); - } - MP_bus_info(&bus); - if (mpc_default_type > 4) { - bus.mpc_busid = 1; - memcpy(bus.mpc_bustype, "PCI ", 6); - MP_bus_info(&bus); - } - - ioapic.mpc_type = MP_IOAPIC; - ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - ioapic.mpc_flags = MPC_APIC_USABLE; - ioapic.mpc_apicaddr = 0xFEC00000; - MP_ioapic_info(&ioapic); - - /* - * We set up most of the low 16 IO-APIC pins according to MPS rules. - */ - construct_default_ioirq_mptable(mpc_default_type); - - lintsrc.mpc_type = MP_LINTSRC; - lintsrc.mpc_irqflag = 0; /* conforming */ - lintsrc.mpc_srcbusid = 0; - lintsrc.mpc_srcbusirq = 0; - lintsrc.mpc_destapic = MP_APIC_ALL; - for (i = 0; i < 2; i++) { - lintsrc.mpc_irqtype = linttypes[i]; - lintsrc.mpc_destapiclint = i; - MP_lintsrc_info(&lintsrc); - } -} - -static struct intel_mp_floating *mpf_found; - -/* - * Scan the memory blocks for an SMP configuration block. - */ -void __init get_smp_config (void) -{ - struct intel_mp_floating *mpf = mpf_found; - - /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); - return; - } - else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); - - printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - if (mpf->mpf_feature2 & (1<<7)) { - printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); - pic_mode = 1; - } else { - printk(KERN_INFO " Virtual Wire compatibility mode.\n"); - pic_mode = 0; - } - - /* - * Now see if we need to read further. - */ - if (mpf->mpf_feature1 != 0) { - - printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); - - } else if (mpf->mpf_physptr) { - - /* - * Read the physical hardware table. Anything here will - * override the defaults. - */ - if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { - smp_found_config = 0; - printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); - printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); - return; - } - /* - * If there are no explicit MP IRQ entries, then we are - * broken. We set up most of the low 16 IO-APIC pins to - * ISA defaults and hope it will work. - */ - if (!mp_irq_entries) { - struct mpc_config_bus bus; - - printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - memcpy(bus.mpc_bustype, "ISA ", 6); - MP_bus_info(&bus); - - construct_default_ioirq_mptable(0); - } - - } else - BUG(); - - printk(KERN_INFO "Processors: %d\n", num_processors); - /* - * Only use the first configuration found. - */ -} - -static int __init smp_scan_config (unsigned long base, unsigned long length) -{ - unsigned long *bp = phys_to_virt(base); - struct intel_mp_floating *mpf; - - Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); - if (sizeof(*mpf) != 16) - printk("Error: MPF size\n"); - - while (length > 0) { - mpf = (struct intel_mp_floating *)bp; - if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && - !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4)) ) { - - smp_found_config = 1; - printk(KERN_INFO "found SMP MP-table at %08lx\n", - virt_to_phys(mpf)); - reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE); - if (mpf->mpf_physptr) { - /* - * We cannot access to MPC table to compute - * table size yet, as only few megabytes from - * the bottom is mapped now. - * PC-9800's MPC table places on the very last - * of physical memory; so that simply reserving - * PAGE_SIZE from mpg->mpf_physptr yields BUG() - * in reserve_bootmem. - */ - unsigned long size = PAGE_SIZE; - unsigned long end = max_low_pfn * PAGE_SIZE; - if (mpf->mpf_physptr + size > end) - size = end - mpf->mpf_physptr; - reserve_bootmem(mpf->mpf_physptr, size); - } - - mpf_found = mpf; - return 1; - } - bp += 4; - length -= 16; - } - return 0; -} - -void __init find_smp_config (void) -{ - unsigned int address; - - /* - * FIXME: Linux assumes you have 640K of base ram.. - * this continues the error... - * - * 1) Scan the bottom 1K for a signature - * 2) Scan the top 1K of base RAM - * 3) Scan the 64K of bios - */ - if (smp_scan_config(0x0,0x400) || - smp_scan_config(639*0x400,0x400) || - smp_scan_config(0xF0000,0x10000)) - return; - /* - * If it is an SMP machine we should know now, unless the - * configuration is in an EISA/MCA bus machine with an - * extended bios data area. - * - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E, calculate and scan it here. - * - * NOTE! There are Linux loaders that will corrupt the EBDA - * area, and as such this kind of SMP config may be less - * trustworthy, simply because the SMP table may have been - * stomped on during early boot. These loaders are buggy and - * should be fixed. - * - * MP1.4 SPEC states to only scan first 1K of 4K EBDA. - */ - - address = get_bios_ebda(); - if (address) - smp_scan_config(address, 0x400); -} - -int es7000_plat; - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -void __init mp_register_lapic_address(u64 address) -{ - mp_lapic_addr = (unsigned long) address; - - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); - - Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); -} - -void __cpuinit mp_register_lapic (u8 id, u8 enabled) -{ - struct mpc_config_processor processor; - int boot_cpu = 0; - - if (MAX_APICS - id <= 0) { - printk(KERN_WARNING "Processor #%d invalid (max %d)\n", - id, MAX_APICS); - return; - } - - if (id == boot_cpu_physical_apicid) - boot_cpu = 1; - - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicid = id; - processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); - processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); - processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - - MP_processor_info(&processor); -} - -#ifdef CONFIG_X86_IO_APIC - -#define MP_ISA_BUS 0 -#define MP_MAX_IOAPIC_PIN 127 - -static struct mp_ioapic_routing { - int apic_id; - int gsi_base; - int gsi_end; - u32 pin_programmed[4]; -} mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic (int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - - return -1; -} - -void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) -{ - int idx = 0; - int tmpid; - - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in MADT table, skipping!\n"); - return; - } - - idx = nr_ioapics++; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - tmpid = io_apic_get_unique_id(idx, id); - else - tmpid = id; - if (tmpid == -1) { - nr_ioapics--; - return; - } - mp_ioapics[idx].mpc_apicid = tmpid; - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); - - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, - mp_ioapic_routing[idx].gsi_end); -} - -void __init -mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", - intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); -} - -void __init mp_config_acpi_legacy_irqs (void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; - - /* - * Use the default configuration for the IRQs 0-15. Unless - * overriden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " - "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, - intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); - } -} - -#define MAX_GSI_NUM 4096 - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - static int pci_irq = 16; - /* - * Mapping between Global System Interrups, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - bit = ioapic_pin % 32; - idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); - if (idx > 3) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if ((1< 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } - - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c deleted file mode 100644 index 0c1069b..0000000 --- a/arch/i386/kernel/msr.c +++ /dev/null @@ -1,224 +0,0 @@ -/* ----------------------------------------------------------------------- * - * - * Copyright 2000 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, - * USA; either version 2 of the License, or (at your option) any later - * version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * msr.c - * - * x86 MSR access device - * - * This device is accessed by lseek() to the appropriate register number - * and then read/write in chunks of 8 bytes. A larger size means multiple - * reads or writes of the same register. - * - * This driver uses /dev/cpu/%d/msr where %d is the minor number, and on - * an SMP box will direct the access to CPU %d. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct class *msr_class; - -static loff_t msr_seek(struct file *file, loff_t offset, int orig) -{ - loff_t ret = -EINVAL; - - lock_kernel(); - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - } - unlock_kernel(); - return ret; -} - -static ssize_t msr_read(struct file *file, char __user * buf, - size_t count, loff_t * ppos) -{ - u32 __user *tmp = (u32 __user *) buf; - u32 data[2]; - u32 reg = *ppos; - int cpu = iminor(file->f_path.dentry->d_inode); - int err; - - if (count % 8) - return -EINVAL; /* Invalid chunk size */ - - for (; count; count -= 8) { - err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]); - if (err) - return -EIO; - if (copy_to_user(tmp, &data, 8)) - return -EFAULT; - tmp += 2; - } - - return ((char __user *)tmp) - buf; -} - -static ssize_t msr_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos) -{ - const u32 __user *tmp = (const u32 __user *)buf; - u32 data[2]; - u32 reg = *ppos; - int cpu = iminor(file->f_path.dentry->d_inode); - int err; - - if (count % 8) - return -EINVAL; /* Invalid chunk size */ - - for (; count; count -= 8) { - if (copy_from_user(&data, tmp, 8)) - return -EFAULT; - err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); - if (err) - return -EIO; - tmp += 2; - } - - return ((char __user *)tmp) - buf; -} - -static int msr_open(struct inode *inode, struct file *file) -{ - unsigned int cpu = iminor(file->f_path.dentry->d_inode); - struct cpuinfo_x86 *c = &(cpu_data)[cpu]; - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (!cpu_has(c, X86_FEATURE_MSR)) - return -EIO; /* MSR not supported */ - - return 0; -} - -/* - * File operations we support - */ -static const struct file_operations msr_fops = { - .owner = THIS_MODULE, - .llseek = msr_seek, - .read = msr_read, - .write = msr_write, - .open = msr_open, -}; - -static int msr_device_create(int i) -{ - int err = 0; - struct device *dev; - - dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), "msr%d",i); - if (IS_ERR(dev)) - err = PTR_ERR(dev); - return err; -} - -static int msr_class_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - msr_device_create(cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata msr_class_cpu_notifier = -{ - .notifier_call = msr_class_cpu_callback, -}; - -static int __init msr_init(void) -{ - int i, err = 0; - i = 0; - - if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) { - printk(KERN_ERR "msr: unable to get major %d for msr\n", - MSR_MAJOR); - err = -EBUSY; - goto out; - } - msr_class = class_create(THIS_MODULE, "msr"); - if (IS_ERR(msr_class)) { - err = PTR_ERR(msr_class); - goto out_chrdev; - } - for_each_online_cpu(i) { - err = msr_device_create(i); - if (err != 0) - goto out_class; - } - register_hotcpu_notifier(&msr_class_cpu_notifier); - - err = 0; - goto out; - -out_class: - i = 0; - for_each_online_cpu(i) - device_destroy(msr_class, MKDEV(MSR_MAJOR, i)); - class_destroy(msr_class); -out_chrdev: - unregister_chrdev(MSR_MAJOR, "cpu/msr"); -out: - return err; -} - -static void __exit msr_exit(void) -{ - int cpu = 0; - for_each_online_cpu(cpu) - device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); - class_destroy(msr_class); - unregister_chrdev(MSR_MAJOR, "cpu/msr"); - unregister_hotcpu_notifier(&msr_class_cpu_notifier); -} - -module_init(msr_init); -module_exit(msr_exit) - -MODULE_AUTHOR("H. Peter Anvin "); -MODULE_DESCRIPTION("x86 generic MSR driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/i386/kernel/nmi_32.c b/arch/i386/kernel/nmi_32.c deleted file mode 100644 index c7227e2..0000000 --- a/arch/i386/kernel/nmi_32.c +++ /dev/null @@ -1,468 +0,0 @@ -/* - * linux/arch/i386/nmi.c - * - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "mach_traps.h" - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -/* local prototypes */ -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); - -static int endflag __initdata = 0; - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -static int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - return -1; - - printk(KERN_INFO "Testing NMI watchdog ... "); - - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count; - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - /* Check cpu_callin_map here because that is set - after the timer is started. */ - if (!cpu_isset(cpu, cpu_callin_map)) - continue; -#endif - if (!per_cpu(wd_enabled, cpu)) - continue; - if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - return -1; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -} -/* This needs to happen later in boot so counters are working */ -late_initcall(check_nmi_watchdog); - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - - -/* Suspend/resume support */ - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - - -static struct sysdev_class nmi_sysclass = { - set_kset_name("lapic_nmi"), - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog (void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] - */ - -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): - */ - for_each_present_cpu(cpu) { - if (alert_counter[cpu]) - alert_counter[cpu] = 0; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -extern void die_nmi(struct pt_regs *, const char *msg); - -__kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) -{ - - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc=0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - /* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + kstat_cpu(cpu).irqs[0]; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && last_irq_sums[cpu] == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); - } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; - } - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -int do_nmi_callback(struct pt_regs * regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - if (nmi_watchdog == NMI_DEFAULT) { - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; - } - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/i386/kernel/numaq_32.c b/arch/i386/kernel/numaq_32.c deleted file mode 100644 index 9000d82..0000000 --- a/arch/i386/kernel/numaq_32.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) - -/* - * Function: smp_dump_qct() - * - * Description: gets memory layout from the quad config table. This - * function also updates node_online_map with the nodes (quads) present. - */ -static void __init smp_dump_qct(void) -{ - int node; - struct eachquadmem *eq; - struct sys_cfg_data *scd = - (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); - - nodes_clear(node_online_map); - for_each_node(node) { - if (scd->quads_present31_0 & (1 << node)) { - node_set_online(node); - eq = &scd->eq[node]; - /* Convert to pages */ - node_start_pfn[node] = MB_TO_PAGES( - eq->hi_shrd_mem_start - eq->priv_mem_size); - node_end_pfn[node] = MB_TO_PAGES( - eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); - - memory_present(node, - node_start_pfn[node], node_end_pfn[node]); - node_remap_size[node] = node_memmap_size_bytes(node, - node_start_pfn[node], - node_end_pfn[node]); - } - } -} - -/* - * Unlike Summit, we don't really care to let the NUMA-Q - * fall back to flat mode. Don't compile for NUMA-Q - * unless you really need it! - */ -int __init get_memcfg_numaq(void) -{ - smp_dump_qct(); - return 1; -} - -static int __init numaq_tsc_disable(void) -{ - if (num_online_nodes() > 1) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - tsc_disable = 1; - } - return 0; -} -arch_initcall(numaq_tsc_disable); diff --git a/arch/i386/kernel/paravirt_32.c b/arch/i386/kernel/paravirt_32.c deleted file mode 100644 index 739cfb2..0000000 --- a/arch/i386/kernel/paravirt_32.c +++ /dev/null @@ -1,392 +0,0 @@ -/* Paravirtualization interfaces - Copyright (C) 2006 Rusty Russell IBM Corporation - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* nop stub */ -void _paravirt_nop(void) -{ -} - -static void __init default_banner(void) -{ - printk(KERN_INFO "Booting paravirtualized kernel on %s\n", - paravirt_ops.name); -} - -char *memory_setup(void) -{ - return paravirt_ops.memory_setup(); -} - -/* Simple instruction patching code. */ -#define DEF_NATIVE(name, code) \ - extern const char start_##name[], end_##name[]; \ - asm("start_" #name ": " code "; end_" #name ":") - -DEF_NATIVE(irq_disable, "cli"); -DEF_NATIVE(irq_enable, "sti"); -DEF_NATIVE(restore_fl, "push %eax; popf"); -DEF_NATIVE(save_fl, "pushf; pop %eax"); -DEF_NATIVE(iret, "iret"); -DEF_NATIVE(irq_enable_sysexit, "sti; sysexit"); -DEF_NATIVE(read_cr2, "mov %cr2, %eax"); -DEF_NATIVE(write_cr3, "mov %eax, %cr3"); -DEF_NATIVE(read_cr3, "mov %cr3, %eax"); -DEF_NATIVE(clts, "clts"); -DEF_NATIVE(read_tsc, "rdtsc"); - -DEF_NATIVE(ud2a, "ud2a"); - -static unsigned native_patch(u8 type, u16 clobbers, void *ibuf, - unsigned long addr, unsigned len) -{ - const unsigned char *start, *end; - unsigned ret; - - switch(type) { -#define SITE(x) case PARAVIRT_PATCH(x): start = start_##x; end = end_##x; goto patch_site - SITE(irq_disable); - SITE(irq_enable); - SITE(restore_fl); - SITE(save_fl); - SITE(iret); - SITE(irq_enable_sysexit); - SITE(read_cr2); - SITE(read_cr3); - SITE(write_cr3); - SITE(clts); - SITE(read_tsc); -#undef SITE - - patch_site: - ret = paravirt_patch_insns(ibuf, len, start, end); - break; - - case PARAVIRT_PATCH(make_pgd): - case PARAVIRT_PATCH(make_pte): - case PARAVIRT_PATCH(pgd_val): - case PARAVIRT_PATCH(pte_val): -#ifdef CONFIG_X86_PAE - case PARAVIRT_PATCH(make_pmd): - case PARAVIRT_PATCH(pmd_val): -#endif - /* These functions end up returning exactly what - they're passed, in the same registers. */ - ret = paravirt_patch_nop(); - break; - - default: - ret = paravirt_patch_default(type, clobbers, ibuf, addr, len); - break; - } - - return ret; -} - -unsigned paravirt_patch_nop(void) -{ - return 0; -} - -unsigned paravirt_patch_ignore(unsigned len) -{ - return len; -} - -struct branch { - unsigned char opcode; - u32 delta; -} __attribute__((packed)); - -unsigned paravirt_patch_call(void *insnbuf, - const void *target, u16 tgt_clobbers, - unsigned long addr, u16 site_clobbers, - unsigned len) -{ - struct branch *b = insnbuf; - unsigned long delta = (unsigned long)target - (addr+5); - - if (tgt_clobbers & ~site_clobbers) - return len; /* target would clobber too much for this site */ - if (len < 5) - return len; /* call too long for patch site */ - - b->opcode = 0xe8; /* call */ - b->delta = delta; - BUILD_BUG_ON(sizeof(*b) != 5); - - return 5; -} - -unsigned paravirt_patch_jmp(const void *target, void *insnbuf, - unsigned long addr, unsigned len) -{ - struct branch *b = insnbuf; - unsigned long delta = (unsigned long)target - (addr+5); - - if (len < 5) - return len; /* call too long for patch site */ - - b->opcode = 0xe9; /* jmp */ - b->delta = delta; - - return 5; -} - -unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf, - unsigned long addr, unsigned len) -{ - void *opfunc = *((void **)¶virt_ops + type); - unsigned ret; - - if (opfunc == NULL) - /* If there's no function, patch it with a ud2a (BUG) */ - ret = paravirt_patch_insns(insnbuf, len, start_ud2a, end_ud2a); - else if (opfunc == paravirt_nop) - /* If the operation is a nop, then nop the callsite */ - ret = paravirt_patch_nop(); - else if (type == PARAVIRT_PATCH(iret) || - type == PARAVIRT_PATCH(irq_enable_sysexit)) - /* If operation requires a jmp, then jmp */ - ret = paravirt_patch_jmp(opfunc, insnbuf, addr, len); - else - /* Otherwise call the function; assume target could - clobber any caller-save reg */ - ret = paravirt_patch_call(insnbuf, opfunc, CLBR_ANY, - addr, clobbers, len); - - return ret; -} - -unsigned paravirt_patch_insns(void *insnbuf, unsigned len, - const char *start, const char *end) -{ - unsigned insn_len = end - start; - - if (insn_len > len || start == NULL) - insn_len = len; - else - memcpy(insnbuf, start, insn_len); - - return insn_len; -} - -void init_IRQ(void) -{ - paravirt_ops.init_IRQ(); -} - -static void native_flush_tlb(void) -{ - __native_flush_tlb(); -} - -/* - * Global pages have to be flushed a bit differently. Not a real - * performance problem because this does not happen often. - */ -static void native_flush_tlb_global(void) -{ - __native_flush_tlb_global(); -} - -static void native_flush_tlb_single(unsigned long addr) -{ - __native_flush_tlb_single(addr); -} - -/* These are in entry.S */ -extern void native_iret(void); -extern void native_irq_enable_sysexit(void); - -static int __init print_banner(void) -{ - paravirt_ops.banner(); - return 0; -} -core_initcall(print_banner); - -static struct resource reserve_ioports = { - .start = 0, - .end = IO_SPACE_LIMIT, - .name = "paravirt-ioport", - .flags = IORESOURCE_IO | IORESOURCE_BUSY, -}; - -static struct resource reserve_iomem = { - .start = 0, - .end = -1, - .name = "paravirt-iomem", - .flags = IORESOURCE_MEM | IORESOURCE_BUSY, -}; - -/* - * Reserve the whole legacy IO space to prevent any legacy drivers - * from wasting time probing for their hardware. This is a fairly - * brute-force approach to disabling all non-virtual drivers. - * - * Note that this must be called very early to have any effect. - */ -int paravirt_disable_iospace(void) -{ - int ret; - - ret = request_resource(&ioport_resource, &reserve_ioports); - if (ret == 0) { - ret = request_resource(&iomem_resource, &reserve_iomem); - if (ret) - release_resource(&reserve_ioports); - } - - return ret; -} - -struct paravirt_ops paravirt_ops = { - .name = "bare hardware", - .paravirt_enabled = 0, - .kernel_rpl = 0, - .shared_kernel_pmd = 1, /* Only used when CONFIG_X86_PAE is set */ - - .patch = native_patch, - .banner = default_banner, - .arch_setup = paravirt_nop, - .memory_setup = machine_specific_memory_setup, - .get_wallclock = native_get_wallclock, - .set_wallclock = native_set_wallclock, - .time_init = hpet_time_init, - .init_IRQ = native_init_IRQ, - - .cpuid = native_cpuid, - .get_debugreg = native_get_debugreg, - .set_debugreg = native_set_debugreg, - .clts = native_clts, - .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, - .read_cr2 = native_read_cr2, - .write_cr2 = native_write_cr2, - .read_cr3 = native_read_cr3, - .write_cr3 = native_write_cr3, - .read_cr4 = native_read_cr4, - .read_cr4_safe = native_read_cr4_safe, - .write_cr4 = native_write_cr4, - .save_fl = native_save_fl, - .restore_fl = native_restore_fl, - .irq_disable = native_irq_disable, - .irq_enable = native_irq_enable, - .safe_halt = native_safe_halt, - .halt = native_halt, - .wbinvd = native_wbinvd, - .read_msr = native_read_msr_safe, - .write_msr = native_write_msr_safe, - .read_tsc = native_read_tsc, - .read_pmc = native_read_pmc, - .sched_clock = native_sched_clock, - .get_cpu_khz = native_calculate_cpu_khz, - .load_tr_desc = native_load_tr_desc, - .set_ldt = native_set_ldt, - .load_gdt = native_load_gdt, - .load_idt = native_load_idt, - .store_gdt = native_store_gdt, - .store_idt = native_store_idt, - .store_tr = native_store_tr, - .load_tls = native_load_tls, - .write_ldt_entry = write_dt_entry, - .write_gdt_entry = write_dt_entry, - .write_idt_entry = write_dt_entry, - .load_esp0 = native_load_esp0, - - .set_iopl_mask = native_set_iopl_mask, - .io_delay = native_io_delay, - -#ifdef CONFIG_X86_LOCAL_APIC - .apic_write = native_apic_write, - .apic_write_atomic = native_apic_write_atomic, - .apic_read = native_apic_read, - .setup_boot_clock = setup_boot_APIC_clock, - .setup_secondary_clock = setup_secondary_APIC_clock, - .startup_ipi_hook = paravirt_nop, -#endif - .set_lazy_mode = paravirt_nop, - - .pagetable_setup_start = native_pagetable_setup_start, - .pagetable_setup_done = native_pagetable_setup_done, - - .flush_tlb_user = native_flush_tlb, - .flush_tlb_kernel = native_flush_tlb_global, - .flush_tlb_single = native_flush_tlb_single, - .flush_tlb_others = native_flush_tlb_others, - - .alloc_pt = paravirt_nop, - .alloc_pd = paravirt_nop, - .alloc_pd_clone = paravirt_nop, - .release_pt = paravirt_nop, - .release_pd = paravirt_nop, - - .set_pte = native_set_pte, - .set_pte_at = native_set_pte_at, - .set_pmd = native_set_pmd, - .pte_update = paravirt_nop, - .pte_update_defer = paravirt_nop, - -#ifdef CONFIG_HIGHPTE - .kmap_atomic_pte = kmap_atomic, -#endif - -#ifdef CONFIG_X86_PAE - .set_pte_atomic = native_set_pte_atomic, - .set_pte_present = native_set_pte_present, - .set_pud = native_set_pud, - .pte_clear = native_pte_clear, - .pmd_clear = native_pmd_clear, - - .pmd_val = native_pmd_val, - .make_pmd = native_make_pmd, -#endif - - .pte_val = native_pte_val, - .pgd_val = native_pgd_val, - - .make_pte = native_make_pte, - .make_pgd = native_make_pgd, - - .irq_enable_sysexit = native_irq_enable_sysexit, - .iret = native_iret, - - .dup_mmap = paravirt_nop, - .exit_mmap = paravirt_nop, - .activate_mm = paravirt_nop, -}; - -EXPORT_SYMBOL(paravirt_ops); diff --git a/arch/i386/kernel/pci-dma_32.c b/arch/i386/kernel/pci-dma_32.c deleted file mode 100644 index 048f09b..0000000 --- a/arch/i386/kernel/pci-dma_32.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Dynamic DMA mapping support. - * - * On i386 there is no hardware dynamic DMA address translation, - * so consistent alloc/free are merely page allocation/freeing. - * The rest of the dynamic DMA mapping interface is implemented - * in asm/pci.h. - */ - -#include -#include -#include -#include -#include -#include -#include - -struct dma_coherent_mem { - void *virt_base; - u32 device_base; - int size; - int flags; - unsigned long *bitmap; -}; - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp) -{ - void *ret; - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - int order = get_order(size); - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (mem) { - int page = bitmap_find_free_region(mem->bitmap, mem->size, - order); - if (page >= 0) { - *dma_handle = mem->device_base + (page << PAGE_SHIFT); - ret = mem->virt_base + (page << PAGE_SHIFT); - memset(ret, 0, size); - return ret; - } - if (mem->flags & DMA_MEMORY_EXCLUSIVE) - return NULL; - } - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - - ret = (void *)__get_free_pages(gfp, order); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - return ret; -} -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - int order = get_order(size); - - if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { - int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - - bitmap_release_region(mem->bitmap, page, order); - } else - free_pages((unsigned long)vaddr, order); -} -EXPORT_SYMBOL(dma_free_coherent); - -int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags) -{ - void __iomem *mem_base = NULL; - int pages = size >> PAGE_SHIFT; - int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); - - if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) - goto out; - if (!size) - goto out; - if (dev->dma_mem) - goto out; - - /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ - - mem_base = ioremap(bus_addr, size); - if (!mem_base) - goto out; - - dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); - if (!dev->dma_mem) - goto out; - dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); - if (!dev->dma_mem->bitmap) - goto free1_out; - - dev->dma_mem->virt_base = mem_base; - dev->dma_mem->device_base = device_addr; - dev->dma_mem->size = pages; - dev->dma_mem->flags = flags; - - if (flags & DMA_MEMORY_MAP) - return DMA_MEMORY_MAP; - - return DMA_MEMORY_IO; - - free1_out: - kfree(dev->dma_mem); - out: - if (mem_base) - iounmap(mem_base); - return 0; -} -EXPORT_SYMBOL(dma_declare_coherent_memory); - -void dma_release_declared_memory(struct device *dev) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - - if(!mem) - return; - dev->dma_mem = NULL; - iounmap(mem->virt_base); - kfree(mem->bitmap); - kfree(mem); -} -EXPORT_SYMBOL(dma_release_declared_memory); - -void *dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; - int pos, err; - - if (!mem) - return ERR_PTR(-EINVAL); - - pos = (device_addr - mem->device_base) >> PAGE_SHIFT; - err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); - if (err != 0) - return ERR_PTR(err); - return mem->virt_base + (pos << PAGE_SHIFT); -} -EXPORT_SYMBOL(dma_mark_declared_memory_occupied); - -#ifdef CONFIG_PCI -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ - -int forbid_dac; -EXPORT_SYMBOL(forbid_dac); - -static __devinit void via_no_dac(struct pci_dev *dev) -{ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); - forbid_dac = 1; - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); - -static int check_iommu(char *s) -{ - if (!strcmp(s, "usedac")) { - forbid_dac = -1; - return 1; - } - return 0; -} -__setup("iommu=", check_iommu); -#endif diff --git a/arch/i386/kernel/pcspeaker.c b/arch/i386/kernel/pcspeaker.c deleted file mode 100644 index bc1f2d3..0000000 --- a/arch/i386/kernel/pcspeaker.c +++ /dev/null @@ -1,20 +0,0 @@ -#include -#include -#include - -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); diff --git a/arch/i386/kernel/process_32.c b/arch/i386/kernel/process_32.c deleted file mode 100644 index 8466471..0000000 --- a/arch/i386/kernel/process_32.c +++ /dev/null @@ -1,951 +0,0 @@ -/* - * linux/arch/i386/kernel/process.c - * - * Copyright (C) 1995 Linus Torvalds - * - * Pentium III FXSR, SSE support - * Gareth Hughes , May 2000 - */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_MATH_EMULATION -#include -#endif - -#include - -#include -#include - -asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); - -static int hlt_counter; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; -EXPORT_PER_CPU_SYMBOL(current_task); - -DEFINE_PER_CPU(int, cpu_number); -EXPORT_PER_CPU_SYMBOL(cpu_number); - -/* - * Return saved PC of a blocked thread. - */ -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return ((unsigned long *)tsk->thread.esp)[3]; -} - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); -static DEFINE_PER_CPU(unsigned int, cpu_idle_state); - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - - local_irq_disable(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - } else { - /* loop is done by the caller */ - cpu_relax(); - } -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(default_idle); -#endif - -/* - * On SMP it's slightly faster (but much more power-consuming!) - * to poll the ->work.need_resched flag instead of waiting for the - * cross-CPU IPI to arrive. Use this option with caution. - */ -static void poll_idle (void) -{ - cpu_relax(); -} - -#ifdef CONFIG_HOTPLUG_CPU -#include -/* We don't actually take CPU down, just spin without interrupts. */ -static inline void play_dead(void) -{ - /* This must be done before dead CPU ack */ - cpu_exit_clear(); - wbinvd(); - mb(); - /* Ack it */ - __get_cpu_var(cpu_state) = CPU_DEAD; - - /* - * With physical CPU hotplug, we should halt the cpu - */ - local_irq_disable(); - while (1) - halt(); -} -#else -static inline void play_dead(void) -{ - BUG(); -} -#endif /* CONFIG_HOTPLUG_CPU */ - -/* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - current_thread_info()->status |= TS_POLLING; - - /* endless idle loop with no priority at all */ - while (1) { - tick_nohz_stop_sched_tick(); - while (!need_resched()) { - void (*idle)(void); - - if (__get_cpu_var(cpu_idle_state)) - __get_cpu_var(cpu_idle_state) = 0; - - check_pgt_cache(); - rmb(); - idle = pm_idle; - - if (!idle) - idle = default_idle; - - if (cpu_is_offline(cpu)) - play_dead(); - - __get_cpu_var(irq_stat).idle_timestamp = jiffies; - idle(); - } - tick_nohz_restart_sched_tick(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -void cpu_idle_wait(void) -{ - unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map, tmp = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); - put_cpu(); - - cpus_clear(map); - for_each_online_cpu(cpu) { - per_cpu(cpu_idle_state, cpu) = 1; - cpu_set(cpu, map); - } - - __get_cpu_var(cpu_idle_state) = 0; - - wmb(); - do { - ssleep(1); - for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) - cpu_clear(cpu, map); - } - cpus_and(map, map, cpu_online_map); - } while (!cpus_empty(map)); - - set_cpus_allowed(current, tmp); -} -EXPORT_SYMBOL_GPL(cpu_idle_wait); - -/* - * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, - * which can obviate IPI to trigger checking of need_resched. - * We execute MONITOR against need_resched and enter optimized wait state - * through MWAIT. Whenever someone changes need_resched, we would be woken - * up from MWAIT (without an IPI). - * - * New with Core Duo processors, MWAIT can take some hints based on CPU - * capability. - */ -void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) -{ - if (!need_resched()) { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - smp_mb(); - if (!need_resched()) - __mwait(eax, ecx); - } -} - -/* Default MONITOR/MWAIT with no hints, used for default C1 state */ -static void mwait_idle(void) -{ - local_irq_enable(); - mwait_idle_with_hints(0, 0); -} - -void __devinit select_idle_routine(const struct cpuinfo_x86 *c) -{ - if (cpu_has(c, X86_FEATURE_MWAIT)) { - printk("monitor/mwait feature present.\n"); - /* - * Skip, if setup has overridden idle. - * One CPU supports mwait => All CPUs supports mwait - */ - if (!pm_idle) { - printk("using mwait in idle threads.\n"); - pm_idle = mwait_idle; - } - } -} - -static int __init idle_setup(char *str) -{ - if (!strcmp(str, "poll")) { - printk("using polling idle threads.\n"); - pm_idle = poll_idle; -#ifdef CONFIG_X86_SMP - if (smp_num_siblings > 1) - printk("WARNING: polling idle and HT enabled, performance may degrade.\n"); -#endif - } else if (!strcmp(str, "mwait")) - force_mwait = 1; - else - return -1; - - boot_option_idle_override = 1; - return 0; -} -early_param("idle", idle_setup); - -void show_regs(struct pt_regs * regs) -{ - unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; - unsigned long d0, d1, d2, d3, d6, d7; - - printk("\n"); - printk("Pid: %d, comm: %20s\n", current->pid, current->comm); - printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id()); - print_symbol("EIP is at %s\n", regs->eip); - - if (user_mode_vm(regs)) - printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp); - printk(" EFLAGS: %08lx %s (%s %.*s)\n", - regs->eflags, print_tainted(), init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); - printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", - regs->eax,regs->ebx,regs->ecx,regs->edx); - printk("ESI: %08lx EDI: %08lx EBP: %08lx", - regs->esi, regs->edi, regs->ebp); - printk(" DS: %04x ES: %04x FS: %04x\n", - 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xfs); - - cr0 = read_cr0(); - cr2 = read_cr2(); - cr3 = read_cr3(); - cr4 = read_cr4_safe(); - printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); - - get_debugreg(d0, 0); - get_debugreg(d1, 1); - get_debugreg(d2, 2); - get_debugreg(d3, 3); - printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", - d0, d1, d2, d3); - get_debugreg(d6, 6); - get_debugreg(d7, 7); - printk("DR6: %08lx DR7: %08lx\n", d6, d7); - - show_trace(NULL, regs, ®s->esp); -} - -/* - * This gets run with %ebx containing the - * function to call, and %edx containing - * the "args". - */ -extern void kernel_thread_helper(void); - -/* - * Create a kernel thread - */ -int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - - regs.ebx = (unsigned long) fn; - regs.edx = (unsigned long) arg; - - regs.xds = __USER_DS; - regs.xes = __USER_DS; - regs.xfs = __KERNEL_PERCPU; - regs.orig_eax = -1; - regs.eip = (unsigned long) kernel_thread_helper; - regs.xcs = __KERNEL_CS | get_kernel_rpl(); - regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2; - - /* Ok, create the new process.. */ - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -} -EXPORT_SYMBOL(kernel_thread); - -/* - * Free current thread data structures etc.. - */ -void exit_thread(void) -{ - /* The process may have allocated an io port bitmap... nuke it. */ - if (unlikely(test_thread_flag(TIF_IO_BITMAP))) { - struct task_struct *tsk = current; - struct thread_struct *t = &tsk->thread; - int cpu = get_cpu(); - struct tss_struct *tss = &per_cpu(init_tss, cpu); - - kfree(t->io_bitmap_ptr); - t->io_bitmap_ptr = NULL; - clear_thread_flag(TIF_IO_BITMAP); - /* - * Careful, clear this in the TSS too: - */ - memset(tss->io_bitmap, 0xff, tss->io_bitmap_max); - t->io_bitmap_max = 0; - tss->io_bitmap_owner = NULL; - tss->io_bitmap_max = 0; - tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; - put_cpu(); - } -} - -void flush_thread(void) -{ - struct task_struct *tsk = current; - - memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8); - memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); - clear_tsk_thread_flag(tsk, TIF_DEBUG); - /* - * Forget coprocessor state.. - */ - clear_fpu(tsk); - clear_used_math(); -} - -void release_thread(struct task_struct *dead_task) -{ - BUG_ON(dead_task->mm); - release_vm86_irqs(dead_task); -} - -/* - * This gets called before we allocate a new thread and copy - * the current task into it. - */ -void prepare_to_copy(struct task_struct *tsk) -{ - unlazy_fpu(tsk); -} - -int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, - unsigned long unused, - struct task_struct * p, struct pt_regs * regs) -{ - struct pt_regs * childregs; - struct task_struct *tsk; - int err; - - childregs = task_pt_regs(p); - *childregs = *regs; - childregs->eax = 0; - childregs->esp = esp; - - p->thread.esp = (unsigned long) childregs; - p->thread.esp0 = (unsigned long) (childregs+1); - - p->thread.eip = (unsigned long) ret_from_fork; - - savesegment(gs,p->thread.gs); - - tsk = current; - if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { - p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr, - IO_BITMAP_BYTES, GFP_KERNEL); - if (!p->thread.io_bitmap_ptr) { - p->thread.io_bitmap_max = 0; - return -ENOMEM; - } - set_tsk_thread_flag(p, TIF_IO_BITMAP); - } - - /* - * Set a new TLS for the child thread? - */ - if (clone_flags & CLONE_SETTLS) { - struct desc_struct *desc; - struct user_desc info; - int idx; - - err = -EFAULT; - if (copy_from_user(&info, (void __user *)childregs->esi, sizeof(info))) - goto out; - err = -EINVAL; - if (LDT_empty(&info)) - goto out; - - idx = info.entry_number; - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) - goto out; - - desc = p->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; - desc->a = LDT_entry_a(&info); - desc->b = LDT_entry_b(&info); - } - - err = 0; - out: - if (err && p->thread.io_bitmap_ptr) { - kfree(p->thread.io_bitmap_ptr); - p->thread.io_bitmap_max = 0; - } - return err; -} - -/* - * fill in the user structure for a core dump.. - */ -void dump_thread(struct pt_regs * regs, struct user * dump) -{ - int i; - -/* changed the size calculations - should hopefully work better. lbt */ - dump->magic = CMAGIC; - dump->start_code = 0; - dump->start_stack = regs->esp & ~(PAGE_SIZE - 1); - dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; - dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT; - dump->u_dsize -= dump->u_tsize; - dump->u_ssize = 0; - for (i = 0; i < 8; i++) - dump->u_debugreg[i] = current->thread.debugreg[i]; - - if (dump->start_stack < TASK_SIZE) - dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; - - dump->regs.ebx = regs->ebx; - dump->regs.ecx = regs->ecx; - dump->regs.edx = regs->edx; - dump->regs.esi = regs->esi; - dump->regs.edi = regs->edi; - dump->regs.ebp = regs->ebp; - dump->regs.eax = regs->eax; - dump->regs.ds = regs->xds; - dump->regs.es = regs->xes; - dump->regs.fs = regs->xfs; - savesegment(gs,dump->regs.gs); - dump->regs.orig_eax = regs->orig_eax; - dump->regs.eip = regs->eip; - dump->regs.cs = regs->xcs; - dump->regs.eflags = regs->eflags; - dump->regs.esp = regs->esp; - dump->regs.ss = regs->xss; - - dump->u_fpvalid = dump_fpu (regs, &dump->i387); -} -EXPORT_SYMBOL(dump_thread); - -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - struct pt_regs ptregs = *task_pt_regs(tsk); - ptregs.xcs &= 0xffff; - ptregs.xds &= 0xffff; - ptregs.xes &= 0xffff; - ptregs.xss &= 0xffff; - - elf_core_copy_regs(regs, &ptregs); - - return 1; -} - -#ifdef CONFIG_SECCOMP -void hard_disable_TSC(void) -{ - write_cr4(read_cr4() | X86_CR4_TSD); -} -void disable_TSC(void) -{ - preempt_disable(); - if (!test_and_set_thread_flag(TIF_NOTSC)) - /* - * Must flip the CPU state synchronously with - * TIF_NOTSC in the current running context. - */ - hard_disable_TSC(); - preempt_enable(); -} -void hard_enable_TSC(void) -{ - write_cr4(read_cr4() & ~X86_CR4_TSD); -} -#endif /* CONFIG_SECCOMP */ - -static noinline void -__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, - struct tss_struct *tss) -{ - struct thread_struct *next; - - next = &next_p->thread; - - if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { - set_debugreg(next->debugreg[0], 0); - set_debugreg(next->debugreg[1], 1); - set_debugreg(next->debugreg[2], 2); - set_debugreg(next->debugreg[3], 3); - /* no 4 and 5 */ - set_debugreg(next->debugreg[6], 6); - set_debugreg(next->debugreg[7], 7); - } - -#ifdef CONFIG_SECCOMP - if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ - test_tsk_thread_flag(next_p, TIF_NOTSC)) { - /* prev and next are different */ - if (test_tsk_thread_flag(next_p, TIF_NOTSC)) - hard_disable_TSC(); - else - hard_enable_TSC(); - } -#endif - - if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { - /* - * Disable the bitmap via an invalid offset. We still cache - * the previous bitmap owner and the IO bitmap contents: - */ - tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; - return; - } - - if (likely(next == tss->io_bitmap_owner)) { - /* - * Previous owner of the bitmap (hence the bitmap content) - * matches the next task, we dont have to do anything but - * to set a valid offset in the TSS: - */ - tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; - return; - } - /* - * Lazy TSS's I/O bitmap copy. We set an invalid offset here - * and we let the task to get a GPF in case an I/O instruction - * is performed. The handler of the GPF will verify that the - * faulting task has a valid I/O bitmap and, it true, does the - * real copy and restart the instruction. This will save us - * redundant copies when the currently switched task does not - * perform any I/O during its timeslice. - */ - tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; -} - -/* - * switch_to(x,yn) should switch tasks from x to y. - * - * We fsave/fwait so that an exception goes off at the right time - * (as a call from the fsave or fwait in effect) rather than to - * the wrong process. Lazy FP saving no longer makes any sense - * with modern CPU's, and this simplifies a lot of things (SMP - * and UP become the same). - * - * NOTE! We used to use the x86 hardware context switching. The - * reason for not using it any more becomes apparent when you - * try to recover gracefully from saved state that is no longer - * valid (stale segment register values in particular). With the - * hardware task-switch, there is no way to fix up bad state in - * a reasonable manner. - * - * The fact that Intel documents the hardware task-switching to - * be slow is a fairly red herring - this code is not noticeably - * faster. However, there _is_ some room for improvement here, - * so the performance issues may eventually be a valid point. - * More important, however, is the fact that this allows us much - * more flexibility. - * - * The return value (in %eax) will be the "prev" task after - * the task-switch, and shows up in ret_from_fork in entry.S, - * for example. - */ -struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct task_struct *next_p) -{ - struct thread_struct *prev = &prev_p->thread, - *next = &next_p->thread; - int cpu = smp_processor_id(); - struct tss_struct *tss = &per_cpu(init_tss, cpu); - - /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ - - __unlazy_fpu(prev_p); - - - /* we're going to use this soon, after a few expensive things */ - if (next_p->fpu_counter > 5) - prefetch(&next->i387.fxsave); - - /* - * Reload esp0. - */ - load_esp0(tss, next); - - /* - * Save away %gs. No need to save %fs, as it was saved on the - * stack on entry. No need to save %es and %ds, as those are - * always kernel segments while inside the kernel. Doing this - * before setting the new TLS descriptors avoids the situation - * where we temporarily have non-reloadable segments in %fs - * and %gs. This could be an issue if the NMI handler ever - * used %fs or %gs (it does not today), or if the kernel is - * running inside of a hypervisor layer. - */ - savesegment(gs, prev->gs); - - /* - * Load the per-thread Thread-Local Storage descriptor. - */ - load_TLS(next, cpu); - - /* - * Restore IOPL if needed. In normal use, the flags restore - * in the switch assembly will handle this. But if the kernel - * is running virtualized at a non-zero CPL, the popf will - * not restore flags, so it must be done in a separate step. - */ - if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl)) - set_iopl_mask(next->iopl); - - /* - * Now maybe handle debug registers and/or IO bitmaps - */ - if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV || - task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) - __switch_to_xtra(prev_p, next_p, tss); - - /* - * Leave lazy mode, flushing any hypercalls made here. - * This must be done before restoring TLS segments so - * the GDT and LDT are properly updated, and must be - * done before math_state_restore, so the TS bit is up - * to date. - */ - arch_leave_lazy_cpu_mode(); - - /* If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - if (next_p->fpu_counter > 5) - math_state_restore(); - - /* - * Restore %gs if needed (which is common) - */ - if (prev->gs | next->gs) - loadsegment(gs, next->gs); - - x86_write_percpu(current_task, next_p); - - return prev_p; -} - -asmlinkage int sys_fork(struct pt_regs regs) -{ - return do_fork(SIGCHLD, regs.esp, ®s, 0, NULL, NULL); -} - -asmlinkage int sys_clone(struct pt_regs regs) -{ - unsigned long clone_flags; - unsigned long newsp; - int __user *parent_tidptr, *child_tidptr; - - clone_flags = regs.ebx; - newsp = regs.ecx; - parent_tidptr = (int __user *)regs.edx; - child_tidptr = (int __user *)regs.edi; - if (!newsp) - newsp = regs.esp; - return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); -} - -/* - * This is trivial, and on the face of it looks like it - * could equally well be done in user mode. - * - * Not so, for quite unobvious reasons - register pressure. - * In user mode vfork() cannot have a stack frame, and if - * done by calling the "clone()" system call directly, you - * do not have enough call-clobbered registers to hold all - * the information you need. - */ -asmlinkage int sys_vfork(struct pt_regs regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.esp, ®s, 0, NULL, NULL); -} - -/* - * sys_execve() executes a new program. - */ -asmlinkage int sys_execve(struct pt_regs regs) -{ - int error; - char * filename; - - filename = getname((char __user *) regs.ebx); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, - (char __user * __user *) regs.ecx, - (char __user * __user *) regs.edx, - ®s); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - /* Make sure we don't return using sysenter.. */ - set_thread_flag(TIF_IRET); - } - putname(filename); -out: - return error; -} - -#define top_esp (THREAD_SIZE - sizeof(unsigned long)) -#define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long)) - -unsigned long get_wchan(struct task_struct *p) -{ - unsigned long ebp, esp, eip; - unsigned long stack_page; - int count = 0; - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - stack_page = (unsigned long)task_stack_page(p); - esp = p->thread.esp; - if (!stack_page || esp < stack_page || esp > top_esp+stack_page) - return 0; - /* include/asm-i386/system.h:switch_to() pushes ebp last. */ - ebp = *(unsigned long *) esp; - do { - if (ebp < stack_page || ebp > top_ebp+stack_page) - return 0; - eip = *(unsigned long *) (ebp+4); - if (!in_sched_functions(eip)) - return eip; - ebp = *(unsigned long *) ebp; - } while (count++ < 16); - return 0; -} - -/* - * sys_alloc_thread_area: get a yet unused TLS descriptor index. - */ -static int get_free_idx(void) -{ - struct thread_struct *t = ¤t->thread; - int idx; - - for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++) - if (desc_empty(t->tls_array + idx)) - return idx + GDT_ENTRY_TLS_MIN; - return -ESRCH; -} - -/* - * Set a given TLS descriptor: - */ -asmlinkage int sys_set_thread_area(struct user_desc __user *u_info) -{ - struct thread_struct *t = ¤t->thread; - struct user_desc info; - struct desc_struct *desc; - int cpu, idx; - - if (copy_from_user(&info, u_info, sizeof(info))) - return -EFAULT; - idx = info.entry_number; - - /* - * index -1 means the kernel should try to find and - * allocate an empty descriptor: - */ - if (idx == -1) { - idx = get_free_idx(); - if (idx < 0) - return idx; - if (put_user(idx, &u_info->entry_number)) - return -EFAULT; - } - - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) - return -EINVAL; - - desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN; - - /* - * We must not get preempted while modifying the TLS. - */ - cpu = get_cpu(); - - if (LDT_empty(&info)) { - desc->a = 0; - desc->b = 0; - } else { - desc->a = LDT_entry_a(&info); - desc->b = LDT_entry_b(&info); - } - load_TLS(t, cpu); - - put_cpu(); - - return 0; -} - -/* - * Get the current Thread-Local Storage area: - */ - -#define GET_BASE(desc) ( \ - (((desc)->a >> 16) & 0x0000ffff) | \ - (((desc)->b << 16) & 0x00ff0000) | \ - ( (desc)->b & 0xff000000) ) - -#define GET_LIMIT(desc) ( \ - ((desc)->a & 0x0ffff) | \ - ((desc)->b & 0xf0000) ) - -#define GET_32BIT(desc) (((desc)->b >> 22) & 1) -#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3) -#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1) -#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1) -#define GET_PRESENT(desc) (((desc)->b >> 15) & 1) -#define GET_USEABLE(desc) (((desc)->b >> 20) & 1) - -asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) -{ - struct user_desc info; - struct desc_struct *desc; - int idx; - - if (get_user(idx, &u_info->entry_number)) - return -EFAULT; - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) - return -EINVAL; - - memset(&info, 0, sizeof(info)); - - desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; - - info.entry_number = idx; - info.base_addr = GET_BASE(desc); - info.limit = GET_LIMIT(desc); - info.seg_32bit = GET_32BIT(desc); - info.contents = GET_CONTENTS(desc); - info.read_exec_only = !GET_WRITABLE(desc); - info.limit_in_pages = GET_LIMIT_PAGES(desc); - info.seg_not_present = !GET_PRESENT(desc); - info.useable = GET_USEABLE(desc); - - if (copy_to_user(u_info, &info, sizeof(info))) - return -EFAULT; - return 0; -} - -unsigned long arch_align_stack(unsigned long sp) -{ - if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) - sp -= get_random_int() % 8192; - return sp & ~0xf; -} diff --git a/arch/i386/kernel/ptrace_32.c b/arch/i386/kernel/ptrace_32.c deleted file mode 100644 index 7c1b925..0000000 --- a/arch/i386/kernel/ptrace_32.c +++ /dev/null @@ -1,723 +0,0 @@ -/* ptrace.c */ -/* By Ross Biro 1/23/92 */ -/* - * Pentium III FXSR, SSE support - * Gareth Hughes , May 2000 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * does not yet catch signals sent when the child dies. - * in exit.c or in signal.c. - */ - -/* - * Determines which flags the user has access to [1 = access, 0 = no access]. - * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), NT(14), IOPL(12-13), IF(9). - * Also masks reserved bits (31-22, 15, 5, 3, 1). - */ -#define FLAG_MASK 0x00050dd5 - -/* set's the trap flag. */ -#define TRAP_FLAG 0x100 - -/* - * Offset of eflags on child stack.. - */ -#define EFL_OFFSET offsetof(struct pt_regs, eflags) - -static inline struct pt_regs *get_child_regs(struct task_struct *task) -{ - void *stack_top = (void *)task->thread.esp0; - return stack_top - sizeof(struct pt_regs); -} - -/* - * This routine will get a word off of the processes privileged stack. - * the offset is bytes into the pt_regs structure on the stack. - * This routine assumes that all the privileged stacks are in our - * data space. - */ -static inline int get_stack_long(struct task_struct *task, int offset) -{ - unsigned char *stack; - - stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs); - stack += offset; - return (*((int *)stack)); -} - -/* - * This routine will put a word on the processes privileged stack. - * the offset is bytes into the pt_regs structure on the stack. - * This routine assumes that all the privileged stacks are in our - * data space. - */ -static inline int put_stack_long(struct task_struct *task, int offset, - unsigned long data) -{ - unsigned char * stack; - - stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs); - stack += offset; - *(unsigned long *) stack = data; - return 0; -} - -static int putreg(struct task_struct *child, - unsigned long regno, unsigned long value) -{ - switch (regno >> 2) { - case GS: - if (value && (value & 3) != 3) - return -EIO; - child->thread.gs = value; - return 0; - case DS: - case ES: - case FS: - if (value && (value & 3) != 3) - return -EIO; - value &= 0xffff; - break; - case SS: - case CS: - if ((value & 3) != 3) - return -EIO; - value &= 0xffff; - break; - case EFL: - value &= FLAG_MASK; - value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK; - break; - } - if (regno > FS*4) - regno -= 1*4; - put_stack_long(child, regno, value); - return 0; -} - -static unsigned long getreg(struct task_struct *child, - unsigned long regno) -{ - unsigned long retval = ~0UL; - - switch (regno >> 2) { - case GS: - retval = child->thread.gs; - break; - case DS: - case ES: - case FS: - case SS: - case CS: - retval = 0xffff; - /* fall through */ - default: - if (regno > FS*4) - regno -= 1*4; - retval &= get_stack_long(child, regno); - } - return retval; -} - -#define LDT_SEGMENT 4 - -static unsigned long convert_eip_to_linear(struct task_struct *child, struct pt_regs *regs) -{ - unsigned long addr, seg; - - addr = regs->eip; - seg = regs->xcs & 0xffff; - if (regs->eflags & VM_MASK) { - addr = (addr & 0xffff) + (seg << 4); - return addr; - } - - /* - * We'll assume that the code segments in the GDT - * are all zero-based. That is largely true: the - * TLS segments are used for data, and the PNPBIOS - * and APM bios ones we just ignore here. - */ - if (seg & LDT_SEGMENT) { - u32 *desc; - unsigned long base; - - seg &= ~7UL; - - down(&child->mm->context.sem); - if (unlikely((seg >> 3) >= child->mm->context.size)) - addr = -1L; /* bogus selector, access would fault */ - else { - desc = child->mm->context.ldt + seg; - base = ((desc[0] >> 16) | - ((desc[1] & 0xff) << 16) | - (desc[1] & 0xff000000)); - - /* 16-bit code segment? */ - if (!((desc[1] >> 22) & 1)) - addr &= 0xffff; - addr += base; - } - up(&child->mm->context.sem); - } - return addr; -} - -static inline int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) -{ - int i, copied; - unsigned char opcode[15]; - unsigned long addr = convert_eip_to_linear(child, regs); - - copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); - for (i = 0; i < copied; i++) { - switch (opcode[i]) { - /* popf and iret */ - case 0x9d: case 0xcf: - return 1; - /* opcode and address size prefixes */ - case 0x66: case 0x67: - continue; - /* irrelevant prefixes (segment overrides and repeats) */ - case 0x26: case 0x2e: - case 0x36: case 0x3e: - case 0x64: case 0x65: - case 0xf0: case 0xf2: case 0xf3: - continue; - - /* - * pushf: NOTE! We should probably not let - * the user see the TF bit being set. But - * it's more pain than it's worth to avoid - * it, and a debugger could emulate this - * all in user space if it _really_ cares. - */ - case 0x9c: - default: - return 0; - } - } - return 0; -} - -static void set_singlestep(struct task_struct *child) -{ - struct pt_regs *regs = get_child_regs(child); - - /* - * Always set TIF_SINGLESTEP - this guarantees that - * we single-step system calls etc.. This will also - * cause us to set TF when returning to user mode. - */ - set_tsk_thread_flag(child, TIF_SINGLESTEP); - - /* - * If TF was already set, don't do anything else - */ - if (regs->eflags & TRAP_FLAG) - return; - - /* Set TF on the kernel stack.. */ - regs->eflags |= TRAP_FLAG; - - /* - * ..but if TF is changed by the instruction we will trace, - * don't mark it as being "us" that set it, so that we - * won't clear it by hand later. - */ - if (is_setting_trap_flag(child, regs)) - return; - - child->ptrace |= PT_DTRACE; -} - -static void clear_singlestep(struct task_struct *child) -{ - /* Always clear TIF_SINGLESTEP... */ - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - - /* But touch TF only if it was set by us.. */ - if (child->ptrace & PT_DTRACE) { - struct pt_regs *regs = get_child_regs(child); - regs->eflags &= ~TRAP_FLAG; - child->ptrace &= ~PT_DTRACE; - } -} - -/* - * Called by kernel/ptrace.c when detaching.. - * - * Make sure the single step bit is not set. - */ -void ptrace_disable(struct task_struct *child) -{ - clear_singlestep(child); - clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); -} - -/* - * Perform get_thread_area on behalf of the traced child. - */ -static int -ptrace_get_thread_area(struct task_struct *child, - int idx, struct user_desc __user *user_desc) -{ - struct user_desc info; - struct desc_struct *desc; - -/* - * Get the current Thread-Local Storage area: - */ - -#define GET_BASE(desc) ( \ - (((desc)->a >> 16) & 0x0000ffff) | \ - (((desc)->b << 16) & 0x00ff0000) | \ - ( (desc)->b & 0xff000000) ) - -#define GET_LIMIT(desc) ( \ - ((desc)->a & 0x0ffff) | \ - ((desc)->b & 0xf0000) ) - -#define GET_32BIT(desc) (((desc)->b >> 22) & 1) -#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3) -#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1) -#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1) -#define GET_PRESENT(desc) (((desc)->b >> 15) & 1) -#define GET_USEABLE(desc) (((desc)->b >> 20) & 1) - - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) - return -EINVAL; - - desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; - - info.entry_number = idx; - info.base_addr = GET_BASE(desc); - info.limit = GET_LIMIT(desc); - info.seg_32bit = GET_32BIT(desc); - info.contents = GET_CONTENTS(desc); - info.read_exec_only = !GET_WRITABLE(desc); - info.limit_in_pages = GET_LIMIT_PAGES(desc); - info.seg_not_present = !GET_PRESENT(desc); - info.useable = GET_USEABLE(desc); - - if (copy_to_user(user_desc, &info, sizeof(info))) - return -EFAULT; - - return 0; -} - -/* - * Perform set_thread_area on behalf of the traced child. - */ -static int -ptrace_set_thread_area(struct task_struct *child, - int idx, struct user_desc __user *user_desc) -{ - struct user_desc info; - struct desc_struct *desc; - - if (copy_from_user(&info, user_desc, sizeof(info))) - return -EFAULT; - - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) - return -EINVAL; - - desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; - if (LDT_empty(&info)) { - desc->a = 0; - desc->b = 0; - } else { - desc->a = LDT_entry_a(&info); - desc->b = LDT_entry_b(&info); - } - - return 0; -} - -long arch_ptrace(struct task_struct *child, long request, long addr, long data) -{ - struct user * dummy = NULL; - int i, ret; - unsigned long __user *datap = (unsigned long __user *)data; - - switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp; - - ret = -EIO; - if ((addr & 3) || addr < 0 || - addr > sizeof(struct user) - 3) - break; - - tmp = 0; /* Default return condition */ - if(addr < FRAME_SIZE*sizeof(long)) - tmp = getreg(child, addr); - if(addr >= (long) &dummy->u_debugreg[0] && - addr <= (long) &dummy->u_debugreg[7]){ - addr -= (long) &dummy->u_debugreg[0]; - addr = addr >> 2; - tmp = child->thread.debugreg[addr]; - } - ret = put_user(tmp, datap); - break; - } - - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - ret = -EIO; - if ((addr & 3) || addr < 0 || - addr > sizeof(struct user) - 3) - break; - - if (addr < FRAME_SIZE*sizeof(long)) { - ret = putreg(child, addr, data); - break; - } - /* We need to be very careful here. We implicitly - want to modify a portion of the task_struct, and we - have to be selective about what portions we allow someone - to modify. */ - - ret = -EIO; - if(addr >= (long) &dummy->u_debugreg[0] && - addr <= (long) &dummy->u_debugreg[7]){ - - if(addr == (long) &dummy->u_debugreg[4]) break; - if(addr == (long) &dummy->u_debugreg[5]) break; - if(addr < (long) &dummy->u_debugreg[4] && - ((unsigned long) data) >= TASK_SIZE-3) break; - - /* Sanity-check data. Take one half-byte at once with - * check = (val >> (16 + 4*i)) & 0xf. It contains the - * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits - * 2 and 3 are LENi. Given a list of invalid values, - * we do mask |= 1 << invalid_value, so that - * (mask >> check) & 1 is a correct test for invalid - * values. - * - * R/Wi contains the type of the breakpoint / - * watchpoint, LENi contains the length of the watched - * data in the watchpoint case. - * - * The invalid values are: - * - LENi == 0x10 (undefined), so mask |= 0x0f00. - * - R/Wi == 0x10 (break on I/O reads or writes), so - * mask |= 0x4444. - * - R/Wi == 0x00 && LENi != 0x00, so we have mask |= - * 0x1110. - * - * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54. - * - * See the Intel Manual "System Programming Guide", - * 15.2.4 - * - * Note that LENi == 0x10 is defined on x86_64 in long - * mode (i.e. even for 32-bit userspace software, but - * 64-bit kernel), so the x86_64 mask value is 0x5454. - * See the AMD manual no. 24593 (AMD64 System - * Programming)*/ - - if(addr == (long) &dummy->u_debugreg[7]) { - data &= ~DR_CONTROL_RESERVED; - for(i=0; i<4; i++) - if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1) - goto out_tsk; - if (data) - set_tsk_thread_flag(child, TIF_DEBUG); - else - clear_tsk_thread_flag(child, TIF_DEBUG); - } - addr -= (long) &dummy->u_debugreg; - addr = addr >> 2; - child->thread.debugreg[addr] = data; - ret = 0; - } - break; - - case PTRACE_SYSEMU: /* continue and stop at next syscall, which will not be executed */ - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSEMU) { - set_tsk_thread_flag(child, TIF_SYSCALL_EMU); - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - } else if (request == PTRACE_SYSCALL) { - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); - } else { - clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - } - child->exit_code = data; - /* make sure the single step bit is not set. */ - clear_singlestep(child); - wake_up_process(child); - ret = 0; - break; - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - /* make sure the single step bit is not set. */ - clear_singlestep(child); - wake_up_process(child); - break; - - case PTRACE_SYSEMU_SINGLESTEP: /* Same as SYSEMU, but singlestep if not syscall */ - case PTRACE_SINGLESTEP: /* set the trap flag. */ - ret = -EIO; - if (!valid_signal(data)) - break; - - if (request == PTRACE_SYSEMU_SINGLESTEP) - set_tsk_thread_flag(child, TIF_SYSCALL_EMU); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); - - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - set_singlestep(child); - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - - case PTRACE_DETACH: - /* detach a process that was attached. */ - ret = ptrace_detach(child, data); - break; - - case PTRACE_GETREGS: { /* Get all gp regs from the child. */ - if (!access_ok(VERIFY_WRITE, datap, FRAME_SIZE*sizeof(long))) { - ret = -EIO; - break; - } - for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) { - __put_user(getreg(child, i), datap); - datap++; - } - ret = 0; - break; - } - - case PTRACE_SETREGS: { /* Set all gp regs in the child. */ - unsigned long tmp; - if (!access_ok(VERIFY_READ, datap, FRAME_SIZE*sizeof(long))) { - ret = -EIO; - break; - } - for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) { - __get_user(tmp, datap); - putreg(child, i, tmp); - datap++; - } - ret = 0; - break; - } - - case PTRACE_GETFPREGS: { /* Get the child FPU state. */ - if (!access_ok(VERIFY_WRITE, datap, - sizeof(struct user_i387_struct))) { - ret = -EIO; - break; - } - ret = 0; - if (!tsk_used_math(child)) - init_fpu(child); - get_fpregs((struct user_i387_struct __user *)data, child); - break; - } - - case PTRACE_SETFPREGS: { /* Set the child FPU state. */ - if (!access_ok(VERIFY_READ, datap, - sizeof(struct user_i387_struct))) { - ret = -EIO; - break; - } - set_stopped_child_used_math(child); - set_fpregs(child, (struct user_i387_struct __user *)data); - ret = 0; - break; - } - - case PTRACE_GETFPXREGS: { /* Get the child extended FPU state. */ - if (!access_ok(VERIFY_WRITE, datap, - sizeof(struct user_fxsr_struct))) { - ret = -EIO; - break; - } - if (!tsk_used_math(child)) - init_fpu(child); - ret = get_fpxregs((struct user_fxsr_struct __user *)data, child); - break; - } - - case PTRACE_SETFPXREGS: { /* Set the child extended FPU state. */ - if (!access_ok(VERIFY_READ, datap, - sizeof(struct user_fxsr_struct))) { - ret = -EIO; - break; - } - set_stopped_child_used_math(child); - ret = set_fpxregs(child, (struct user_fxsr_struct __user *)data); - break; - } - - case PTRACE_GET_THREAD_AREA: - ret = ptrace_get_thread_area(child, addr, - (struct user_desc __user *) data); - break; - - case PTRACE_SET_THREAD_AREA: - ret = ptrace_set_thread_area(child, addr, - (struct user_desc __user *) data); - break; - - default: - ret = ptrace_request(child, request, addr, data); - break; - } - out_tsk: - return ret; -} - -void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) -{ - struct siginfo info; - - tsk->thread.trap_no = 1; - tsk->thread.error_code = error_code; - - memset(&info, 0, sizeof(info)); - info.si_signo = SIGTRAP; - info.si_code = TRAP_BRKPT; - - /* User-mode eip? */ - info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL; - - /* Send us the fakey SIGTRAP */ - force_sig_info(SIGTRAP, &info, tsk); -} - -/* notification of system call entry/exit - * - triggered by current->work.syscall_trace - */ -__attribute__((regparm(3))) -int do_syscall_trace(struct pt_regs *regs, int entryexit) -{ - int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); - /* - * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall - * interception - */ - int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); - int ret = 0; - - /* do the secure computing check first */ - if (!entryexit) - secure_computing(regs->orig_eax); - - if (unlikely(current->audit_context)) { - if (entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->eax), - regs->eax); - /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only - * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is - * not used, entry.S will call us only on syscall exit, not - * entry; so when TIF_SYSCALL_AUDIT is used we must avoid - * calling send_sigtrap() on syscall entry. - * - * Note that when PTRACE_SYSEMU_SINGLESTEP is used, - * is_singlestep is false, despite his name, so we will still do - * the correct thing. - */ - else if (is_singlestep) - goto out; - } - - if (!(current->ptrace & PT_PTRACED)) - goto out; - - /* If a process stops on the 1st tracepoint with SYSCALL_TRACE - * and then is resumed with SYSEMU_SINGLESTEP, it will come in - * here. We have to check this and return */ - if (is_sysemu && entryexit) - return 0; - - /* Fake a debug trap */ - if (is_singlestep) - send_sigtrap(current, regs, 0); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu) - goto out; - - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - /* Note that the debugger could change the result of test_thread_flag!*/ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } - ret = is_sysemu; -out: - if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax, - regs->ebx, regs->ecx, regs->edx, regs->esi); - if (ret == 0) - return 0; - - regs->orig_eax = -1; /* force skip of syscall restarting */ - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax); - return 1; -} diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c deleted file mode 100644 index 6722469..0000000 --- a/arch/i386/kernel/quirks.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file contains work-arounds for x86 and x86_64 platform bugs. - */ -#include -#include - -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) - -static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) -{ - u8 config, rev; - u32 word; - - /* BIOS may enable hardware IRQ balancing for - * E7520/E7320/E7525(revision ID 0x9 and below) - * based platforms. - * Disable SW irqbalance/affinity on those platforms. - */ - pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); - if (rev > 0x9) - return; - - /* enable access to config space*/ - pci_read_config_byte(dev, 0xf4, &config); - pci_write_config_byte(dev, 0xf4, config|0x2); - - /* read xTPR register */ - raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); - - if (!(word & (1 << 13))) { - printk(KERN_INFO "Intel E7520/7320/7525 detected. " - "Disabling irq balancing and affinity\n"); -#ifdef CONFIG_IRQBALANCE - irqbalance_disable(""); -#endif - noirqdebug_setup(""); -#ifdef CONFIG_PROC_FS - no_irq_affinity = 1; -#endif - } - - /* put back the original value for config space*/ - if (!(config & 0x2)) - pci_write_config_byte(dev, 0xf4, config); -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance); -#endif diff --git a/arch/i386/kernel/reboot_32.c b/arch/i386/kernel/reboot_32.c deleted file mode 100644 index 0d79624..0000000 --- a/arch/i386/kernel/reboot_32.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * linux/arch/i386/kernel/reboot.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mach_reboot.h" -#include -#include - -/* - * Power off function, if any - */ -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -static int reboot_mode; -static int reboot_thru_bios; - -#ifdef CONFIG_SMP -static int reboot_cpu = -1; -#endif -static int __init reboot_setup(char *str) -{ - while(1) { - switch (*str) { - case 'w': /* "warm" reboot (no memory testing etc) */ - reboot_mode = 0x1234; - break; - case 'c': /* "cold" reboot (with memory testing etc) */ - reboot_mode = 0x0; - break; - case 'b': /* "bios" reboot by jumping through the BIOS */ - reboot_thru_bios = 1; - break; - case 'h': /* "hard" reboot by toggling RESET and/or crashing the CPU */ - reboot_thru_bios = 0; - break; -#ifdef CONFIG_SMP - case 's': /* "smp" reboot by executing reset on BSP or other CPU*/ - if (isdigit(*(str+1))) { - reboot_cpu = (int) (*(str+1) - '0'); - if (isdigit(*(str+2))) - reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); - } - /* we will leave sorting out the final value - when we are ready to reboot, since we might not - have set up boot_cpu_id or smp_num_cpu */ - break; -#endif - } - if((str = strchr(str,',')) != NULL) - str++; - else - break; - } - return 1; -} - -__setup("reboot=", reboot_setup); - -/* - * Reboot options and system auto-detection code provided by - * Dell Inc. so their systems "just work". :-) - */ - -/* - * Some machines require the "reboot=b" commandline option, this quirk makes that automatic. - */ -static int __init set_bios_reboot(struct dmi_system_id *d) -{ - if (!reboot_thru_bios) { - reboot_thru_bios = 1; - printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident); - } - return 0; -} - -static struct dmi_system_id __initdata reboot_dmi_table[] = { - { /* Handle problems with rebooting on Dell E520's */ - .callback = set_bios_reboot, - .ident = "Dell E520", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), - }, - }, - { /* Handle problems with rebooting on Dell 1300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 1300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), - }, - }, - { /* Handle problems with rebooting on Dell 300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), - }, - }, - { /* Handle problems with rebooting on Dell Optiplex 745's SFF*/ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), - DMI_MATCH(DMI_BOARD_NAME, "0WF810"), - }, - }, - { /* Handle problems with rebooting on Dell 2400's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 2400", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), - }, - }, - { /* Handle problems with rebooting on HP laptops */ - .callback = set_bios_reboot, - .ident = "HP Compaq Laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), - }, - }, - { } -}; - -static int __init reboot_init(void) -{ - dmi_check_system(reboot_dmi_table); - return 0; -} - -core_initcall(reboot_init); - -/* The following code and data reboots the machine by switching to real - mode and jumping to the BIOS reset entry point, as if the CPU has - really been reset. The previous version asked the keyboard - controller to pulse the CPU reset line, which is more thorough, but - doesn't work with at least one type of 486 motherboard. It is easy - to stop this code working; hence the copious comments. */ - -static unsigned long long -real_mode_gdt_entries [3] = -{ - 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ -}; - -static struct Xgt_desc_struct -real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, -real_mode_idt = { 0x3ff, 0 }, -no_idt = { 0, 0 }; - - -/* This is 16-bit protected mode code to disable paging and the cache, - switch to real mode and jump to the BIOS reset code. - - The instruction that switches to real mode by writing to CR0 must be - followed immediately by a far jump instruction, which set CS to a - valid value for real mode, and flushes the prefetch queue to avoid - running instructions that have already been decoded in protected - mode. - - Clears all the flags except ET, especially PG (paging), PE - (protected-mode enable) and TS (task switch for coprocessor state - save). Flushes the TLB after paging has been disabled. Sets CD and - NW, to disable the cache on a 486, and invalidates the cache. This - is more like the state of a 486 after reset. I don't know if - something else should be done for other chips. - - More could be done here to set up the registers as if a CPU reset had - occurred; hopefully real BIOSs don't assume much. */ - -static unsigned char real_mode_switch [] = -{ - 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ - 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ - 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000,%eax */ - 0x66, 0x0f, 0x22, 0xc0, /* movl %eax,%cr0 */ - 0x66, 0x0f, 0x22, 0xd8, /* movl %eax,%cr3 */ - 0x66, 0x0f, 0x20, 0xc3, /* movl %cr0,%ebx */ - 0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60, /* andl $0x60000000,%ebx */ - 0x74, 0x02, /* jz f */ - 0x0f, 0x09, /* wbinvd */ - 0x24, 0x10, /* f: andb $0x10,al */ - 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ -}; -static unsigned char jump_to_bios [] = -{ - 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ -}; - -/* - * Switch to real mode and then execute the code - * specified by the code and length parameters. - * We assume that length will aways be less that 100! - */ -void machine_real_restart(unsigned char *code, int length) -{ - local_irq_disable(); - - /* Write zero to CMOS register number 0x0f, which the BIOS POST - routine will recognize as telling it to do a proper reboot. (Well - that's what this book in front of me says -- it may only apply to - the Phoenix BIOS though, it's not clear). At the same time, - disable NMIs by setting the top bit in the CMOS address register, - as we're about to do peculiar things to the CPU. I'm not sure if - `outb_p' is needed instead of just `outb'. Use it to be on the - safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.) - */ - - spin_lock(&rtc_lock); - CMOS_WRITE(0x00, 0x8f); - spin_unlock(&rtc_lock); - - /* Remap the kernel at virtual address zero, as well as offset zero - from the kernel segment. This assumes the kernel segment starts at - virtual address PAGE_OFFSET. */ - - memcpy (swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, - sizeof (swapper_pg_dir [0]) * KERNEL_PGD_PTRS); - - /* - * Use `swapper_pg_dir' as our page directory. - */ - load_cr3(swapper_pg_dir); - - /* Write 0x1234 to absolute memory location 0x472. The BIOS reads - this on booting to tell it to "Bypass memory test (also warm - boot)". This seems like a fairly standard thing that gets set by - REBOOT.COM programs, and the previous reset routine did this - too. */ - - *((unsigned short *)0x472) = reboot_mode; - - /* For the switch to real mode, copy some code to low memory. It has - to be in the first 64k because it is running in 16-bit mode, and it - has to have the same physical and virtual address, because it turns - off paging. Copy it near the end of the first page, out of the way - of BIOS variables. */ - - memcpy ((void *) (0x1000 - sizeof (real_mode_switch) - 100), - real_mode_switch, sizeof (real_mode_switch)); - memcpy ((void *) (0x1000 - 100), code, length); - - /* Set up the IDT for real mode. */ - - load_idt(&real_mode_idt); - - /* Set up a GDT from which we can load segment descriptors for real - mode. The GDT is not used in real mode; it is just needed here to - prepare the descriptors. */ - - load_gdt(&real_mode_gdt); - - /* Load the data segment registers, and thus the descriptors ready for - real mode. The base address of each segment is 0x100, 16 times the - selector value being loaded here. This is so that the segment - registers don't have to be reloaded after switching to real mode: - the values are consistent for real mode operation already. */ - - __asm__ __volatile__ ("movl $0x0010,%%eax\n" - "\tmovl %%eax,%%ds\n" - "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" - "\tmovl %%eax,%%ss" : : : "eax"); - - /* Jump to the 16-bit code that we copied earlier. It disables paging - and the cache, switches to real mode, and jumps to the BIOS reset - entry point. */ - - __asm__ __volatile__ ("ljmp $0x0008,%0" - : - : "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100))); -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(machine_real_restart); -#endif - -static void native_machine_shutdown(void) -{ -#ifdef CONFIG_SMP - int reboot_cpu_id; - - /* The boot cpu is always logical cpu 0 */ - reboot_cpu_id = 0; - - /* See if there has been given a command line override */ - if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) && - cpu_isset(reboot_cpu, cpu_online_map)) { - reboot_cpu_id = reboot_cpu; - } - - /* Make certain the cpu I'm rebooting on is online */ - if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { - reboot_cpu_id = smp_processor_id(); - } - - /* Make certain I only run on the appropriate processor */ - set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); - - /* O.K. Now that I'm on the appropriate processor, stop - * all of the others, and disable their local APICs. - */ - - smp_send_stop(); -#endif /* CONFIG_SMP */ - - lapic_shutdown(); - -#ifdef CONFIG_X86_IO_APIC - disable_IO_APIC(); -#endif -} - -void __attribute__((weak)) mach_reboot_fixups(void) -{ -} - -static void native_machine_emergency_restart(void) -{ - if (!reboot_thru_bios) { - if (efi_enabled) { - efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); - load_idt(&no_idt); - __asm__ __volatile__("int3"); - } - /* rebooting needs to touch the page at absolute addr 0 */ - *((unsigned short *)__va(0x472)) = reboot_mode; - for (;;) { - mach_reboot_fixups(); /* for board specific fixups */ - mach_reboot(); - /* That didn't work - force a triple fault.. */ - load_idt(&no_idt); - __asm__ __volatile__("int3"); - } - } - if (efi_enabled) - efi.reset_system(EFI_RESET_WARM, EFI_SUCCESS, 0, NULL); - - machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); -} - -static void native_machine_restart(char * __unused) -{ - machine_shutdown(); - machine_emergency_restart(); -} - -static void native_machine_halt(void) -{ -} - -static void native_machine_power_off(void) -{ - if (pm_power_off) { - machine_shutdown(); - pm_power_off(); - } -} - - -struct machine_ops machine_ops = { - .power_off = native_machine_power_off, - .shutdown = native_machine_shutdown, - .emergency_restart = native_machine_emergency_restart, - .restart = native_machine_restart, - .halt = native_machine_halt, -}; - -void machine_power_off(void) -{ - machine_ops.power_off(); -} - -void machine_shutdown(void) -{ - machine_ops.shutdown(); -} - -void machine_emergency_restart(void) -{ - machine_ops.emergency_restart(); -} - -void machine_restart(char *cmd) -{ - machine_ops.restart(cmd); -} - -void machine_halt(void) -{ - machine_ops.halt(); -} diff --git a/arch/i386/kernel/reboot_fixups_32.c b/arch/i386/kernel/reboot_fixups_32.c deleted file mode 100644 index 03e1cce..0000000 --- a/arch/i386/kernel/reboot_fixups_32.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/arch/i386/kernel/reboot_fixups.c - * - * This is a good place to put board specific reboot fixups. - * - * List of supported fixups: - * geode-gx1/cs5530a - Jaya Kumar - * geode-gx/lx/cs5536 - Andres Salomon - * - */ - -#include -#include -#include -#include - -static void cs5530a_warm_reset(struct pci_dev *dev) -{ - /* writing 1 to the reset control register, 0x44 causes the - cs5530a to perform a system warm reset */ - pci_write_config_byte(dev, 0x44, 0x1); - udelay(50); /* shouldn't get here but be safe and spin-a-while */ - return; -} - -static void cs5536_warm_reset(struct pci_dev *dev) -{ - /* - * 6.6.2.12 Soft Reset (DIVIL_SOFT_RESET) - * writing 1 to the LSB of this MSR causes a hard reset. - */ - wrmsrl(0x51400017, 1ULL); - udelay(50); /* shouldn't get here but be safe and spin a while */ -} - -struct device_fixup { - unsigned int vendor; - unsigned int device; - void (*reboot_fixup)(struct pci_dev *); -}; - -static struct device_fixup fixups_table[] = { -{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, -{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, -}; - -/* - * we see if any fixup is available for our current hardware. if there - * is a fixup, we call it and we expect to never return from it. if we - * do return, we keep looking and then eventually fall back to the - * standard mach_reboot on return. - */ -void mach_reboot_fixups(void) -{ - struct device_fixup *cur; - struct pci_dev *dev; - int i; - - for (i=0; i < ARRAY_SIZE(fixups_table); i++) { - cur = &(fixups_table[i]); - dev = pci_get_device(cur->vendor, cur->device, NULL); - if (!dev) - continue; - - cur->reboot_fixup(dev); - } -} - diff --git a/arch/i386/kernel/relocate_kernel_32.S b/arch/i386/kernel/relocate_kernel_32.S deleted file mode 100644 index f151d6f..0000000 --- a/arch/i386/kernel/relocate_kernel_32.S +++ /dev/null @@ -1,252 +0,0 @@ -/* - * relocate_kernel.S - put the kernel image in place to boot - * Copyright (C) 2002-2004 Eric Biederman - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - -#include -#include -#include - -/* - * Must be relocatable PIC code callable as a C function - */ - -#define PTR(x) (x << 2) -#define PAGE_ALIGNED (1 << PAGE_SHIFT) -#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ -#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */ - - .text - .align PAGE_ALIGNED - .globl relocate_kernel -relocate_kernel: - movl 8(%esp), %ebp /* list of pages */ - -#ifdef CONFIG_X86_PAE - /* map the control page at its virtual address */ - - movl PTR(VA_PGD)(%ebp), %edi - movl PTR(VA_CONTROL_PAGE)(%ebp), %eax - andl $0xc0000000, %eax - shrl $27, %eax - addl %edi, %eax - - movl PTR(PA_PMD_0)(%ebp), %edx - orl $PAE_PGD_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PMD_0)(%ebp), %edi - movl PTR(VA_CONTROL_PAGE)(%ebp), %eax - andl $0x3fe00000, %eax - shrl $18, %eax - addl %edi, %eax - - movl PTR(PA_PTE_0)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PTE_0)(%ebp), %edi - movl PTR(VA_CONTROL_PAGE)(%ebp), %eax - andl $0x001ff000, %eax - shrl $9, %eax - addl %edi, %eax - - movl PTR(PA_CONTROL_PAGE)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - /* identity map the control page at its physical address */ - - movl PTR(VA_PGD)(%ebp), %edi - movl PTR(PA_CONTROL_PAGE)(%ebp), %eax - andl $0xc0000000, %eax - shrl $27, %eax - addl %edi, %eax - - movl PTR(PA_PMD_1)(%ebp), %edx - orl $PAE_PGD_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PMD_1)(%ebp), %edi - movl PTR(PA_CONTROL_PAGE)(%ebp), %eax - andl $0x3fe00000, %eax - shrl $18, %eax - addl %edi, %eax - - movl PTR(PA_PTE_1)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PTE_1)(%ebp), %edi - movl PTR(PA_CONTROL_PAGE)(%ebp), %eax - andl $0x001ff000, %eax - shrl $9, %eax - addl %edi, %eax - - movl PTR(PA_CONTROL_PAGE)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) -#else - /* map the control page at its virtual address */ - - movl PTR(VA_PGD)(%ebp), %edi - movl PTR(VA_CONTROL_PAGE)(%ebp), %eax - andl $0xffc00000, %eax - shrl $20, %eax - addl %edi, %eax - - movl PTR(PA_PTE_0)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PTE_0)(%ebp), %edi - movl PTR(VA_CONTROL_PAGE)(%ebp), %eax - andl $0x003ff000, %eax - shrl $10, %eax - addl %edi, %eax - - movl PTR(PA_CONTROL_PAGE)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - /* identity map the control page at its physical address */ - - movl PTR(VA_PGD)(%ebp), %edi - movl PTR(PA_CONTROL_PAGE)(%ebp), %eax - andl $0xffc00000, %eax - shrl $20, %eax - addl %edi, %eax - - movl PTR(PA_PTE_1)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) - - movl PTR(VA_PTE_1)(%ebp), %edi - movl PTR(PA_CONTROL_PAGE)(%ebp), %eax - andl $0x003ff000, %eax - shrl $10, %eax - addl %edi, %eax - - movl PTR(PA_CONTROL_PAGE)(%ebp), %edx - orl $PAGE_ATTR, %edx - movl %edx, (%eax) -#endif - -relocate_new_kernel: - /* read the arguments and say goodbye to the stack */ - movl 4(%esp), %ebx /* page_list */ - movl 8(%esp), %ebp /* list of pages */ - movl 12(%esp), %edx /* start address */ - movl 16(%esp), %ecx /* cpu_has_pae */ - - /* zero out flags, and disable interrupts */ - pushl $0 - popfl - - /* get physical address of control page now */ - /* this is impossible after page table switch */ - movl PTR(PA_CONTROL_PAGE)(%ebp), %edi - - /* switch to new set of page tables */ - movl PTR(PA_PGD)(%ebp), %eax - movl %eax, %cr3 - - /* setup a new stack at the end of the physical control page */ - lea 4096(%edi), %esp - - /* jump to identity mapped page */ - movl %edi, %eax - addl $(identity_mapped - relocate_kernel), %eax - pushl %eax - ret - -identity_mapped: - /* store the start address on the stack */ - pushl %edx - - /* Set cr0 to a known state: - * 31 0 == Paging disabled - * 18 0 == Alignment check disabled - * 16 0 == Write protect disabled - * 3 0 == No task switch - * 2 0 == Don't do FP software emulation. - * 0 1 == Proctected mode enabled - */ - movl %cr0, %eax - andl $~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax - orl $(1<<0), %eax - movl %eax, %cr0 - - /* clear cr4 if applicable */ - testl %ecx, %ecx - jz 1f - /* Set cr4 to a known state: - * Setting everything to zero seems safe. - */ - movl %cr4, %eax - andl $0, %eax - movl %eax, %cr4 - - jmp 1f -1: - - /* Flush the TLB (needed?) */ - xorl %eax, %eax - movl %eax, %cr3 - - /* Do the copies */ - movl %ebx, %ecx - jmp 1f - -0: /* top, read another word from the indirection page */ - movl (%ebx), %ecx - addl $4, %ebx -1: - testl $0x1, %ecx /* is it a destination page */ - jz 2f - movl %ecx, %edi - andl $0xfffff000, %edi - jmp 0b -2: - testl $0x2, %ecx /* is it an indirection page */ - jz 2f - movl %ecx, %ebx - andl $0xfffff000, %ebx - jmp 0b -2: - testl $0x4, %ecx /* is it the done indicator */ - jz 2f - jmp 3f -2: - testl $0x8, %ecx /* is it the source indicator */ - jz 0b /* Ignore it otherwise */ - movl %ecx, %esi /* For every source page do a copy */ - andl $0xfffff000, %esi - - movl $1024, %ecx - rep ; movsl - jmp 0b - -3: - - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB, it's handy, and not processor dependent. - */ - xorl %eax, %eax - movl %eax, %cr3 - - /* set all of the registers to known values */ - /* leave %esp alone */ - - xorl %eax, %eax - xorl %ebx, %ebx - xorl %ecx, %ecx - xorl %edx, %edx - xorl %esi, %esi - xorl %edi, %edi - xorl %ebp, %ebp - ret diff --git a/arch/i386/kernel/scx200_32.c b/arch/i386/kernel/scx200_32.c deleted file mode 100644 index c7d3df2..0000000 --- a/arch/i386/kernel/scx200_32.c +++ /dev/null @@ -1,131 +0,0 @@ -/* linux/arch/i386/kernel/scx200.c - - Copyright (c) 2001,2002 Christer Weinigel - - National Semiconductor SCx200 support. */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* Verify that the configuration block really is there */ -#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) - -#define NAME "scx200" - -MODULE_AUTHOR("Christer Weinigel "); -MODULE_DESCRIPTION("NatSemi SCx200 Driver"); -MODULE_LICENSE("GPL"); - -unsigned scx200_gpio_base = 0; -long scx200_gpio_shadow[2]; - -unsigned scx200_cb_base = 0; - -static struct pci_device_id scx200_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, - { }, -}; -MODULE_DEVICE_TABLE(pci,scx200_tbl); - -static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *); - -static struct pci_driver scx200_pci_driver = { - .name = "scx200", - .id_table = scx200_tbl, - .probe = scx200_probe, -}; - -static DEFINE_MUTEX(scx200_gpio_config_lock); - -static void __devinit scx200_init_shadow(void) -{ - int bank; - - /* read the current values driven on the GPIO signals */ - for (bank = 0; bank < 2; ++bank) - scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); -} - -static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - unsigned base; - - if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || - pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { - base = pci_resource_start(pdev, 0); - printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); - - if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) { - printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); - return -EBUSY; - } - - scx200_gpio_base = base; - scx200_init_shadow(); - - } else { - /* find the base of the Configuration Block */ - if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) { - scx200_cb_base = SCx200_CB_BASE_FIXED; - } else { - pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base); - if (scx200_cb_probe(base)) { - scx200_cb_base = base; - } else { - printk(KERN_WARNING NAME ": Configuration Block not found\n"); - return -ENODEV; - } - } - printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); - } - - return 0; -} - -u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) -{ - u32 config, new_config; - - mutex_lock(&scx200_gpio_config_lock); - - outl(index, scx200_gpio_base + 0x20); - config = inl(scx200_gpio_base + 0x24); - - new_config = (config & mask) | bits; - outl(new_config, scx200_gpio_base + 0x24); - - mutex_unlock(&scx200_gpio_config_lock); - - return config; -} - -static int __init scx200_init(void) -{ - printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); - - return pci_register_driver(&scx200_pci_driver); -} - -static void __exit scx200_cleanup(void) -{ - pci_unregister_driver(&scx200_pci_driver); - release_region(scx200_gpio_base, SCx200_GPIO_SIZE); -} - -module_init(scx200_init); -module_exit(scx200_cleanup); - -EXPORT_SYMBOL(scx200_gpio_base); -EXPORT_SYMBOL(scx200_gpio_shadow); -EXPORT_SYMBOL(scx200_gpio_configure); -EXPORT_SYMBOL(scx200_cb_base); diff --git a/arch/i386/kernel/setup_32.c b/arch/i386/kernel/setup_32.c deleted file mode 100644 index d474cd6..0000000 --- a/arch/i386/kernel/setup_32.c +++ /dev/null @@ -1,653 +0,0 @@ -/* - * linux/arch/i386/kernel/setup.c - * - * Copyright (C) 1995 Linus Torvalds - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - * - * Memory region support - * David Parsons , July-August 1999 - * - * Added E820 sanitization routine (removes overlapping memory regions); - * Brian Moyle , February 2001 - * - * Moved CPU detection code to cpu/${cpu}.c - * Patrick Mochel , March 2002 - * - * Provisions for empty E820 memory regions (reported by certain BIOSes). - * Alex Achenbach , December 2002. - * - */ - -/* - * This file handles the architecture-dependent parts of initialization - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include