From 646cdb32831eebe8c2f742c293d0d266326854d9 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 26 May 2009 12:35:25 +0000 Subject: 3c50x: convert printk() to pr_() Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/3c509.c | 64 ++++++++++++++++++++++++++--------------------------- 1 file changed, 31 insertions(+), 33 deletions(-) (limited to 'drivers/net/3c509.c') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 393e4e7..8d9aa49 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -257,7 +257,7 @@ static int el3_isa_id_sequence(__be16 *phys_addr) && !memcmp(phys_addr, el3_devs[i]->dev_addr, ETH_ALEN)) { if (el3_debug > 3) - printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", + pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", phys_addr[0] & 0xff, phys_addr[0] >> 8, phys_addr[1] & 0xff, phys_addr[1] >> 8, phys_addr[2] & 0xff, phys_addr[2] >> 8); @@ -574,19 +574,18 @@ static int __devinit el3_common_init(struct net_device *dev) err = register_netdev(dev); if (err) { - printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", + pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", dev->base_addr, dev->irq); release_region(dev->base_addr, EL3_IO_EXTENT); return err; } - printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, " - "address %pM, IRQ %d.\n", + pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n", dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], dev->dev_addr, dev->irq); if (el3_debug > 0) - printk(KERN_INFO "%s", version); + pr_info("%s", version); return 0; } @@ -625,8 +624,8 @@ static int __init el3_mca_probe(struct device *device) irq = pos5 & 0x0f; - printk(KERN_INFO "3c529: found %s at slot %d\n", - el3_mca_adapter_names[mdev->index], slot + 1); + pr_info("3c529: found %s at slot %d\n", + el3_mca_adapter_names[mdev->index], slot + 1); /* claim the slot */ strncpy(mdev->name, el3_mca_adapter_names[mdev->index], @@ -638,7 +637,7 @@ static int __init el3_mca_probe(struct device *device) irq = mca_device_transform_irq(mdev, irq); ioaddr = mca_device_transform_ioport(mdev, ioaddr); if (el3_debug > 2) { - printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port); + pr_debug("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port); } EL3WINDOW(0); for (i = 0; i < 3; i++) @@ -761,7 +760,7 @@ static ushort id_read_eeprom(int index) word = (word << 1) + (inb(id_port) & 0x01); if (el3_debug > 3) - printk(KERN_DEBUG " 3c509 EEPROM word %d %#4.4x.\n", index, word); + pr_debug(" 3c509 EEPROM word %d %#4.4x.\n", index, word); return word; } @@ -783,13 +782,13 @@ el3_open(struct net_device *dev) EL3WINDOW(0); if (el3_debug > 3) - printk(KERN_DEBUG "%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, + pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); el3_up(dev); if (el3_debug > 3) - printk(KERN_DEBUG "%s: Opened 3c509 IRQ %d status %4.4x.\n", + pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n", dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); return 0; @@ -801,8 +800,7 @@ el3_tx_timeout (struct net_device *dev) int ioaddr = dev->base_addr; /* Transmitter timeout, serious problems. */ - printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x " - "Tx FIFO room %d.\n", + pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n", dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS), inw(ioaddr + TX_FREE)); dev->stats.tx_errors++; @@ -826,7 +824,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->stats.tx_bytes += skb->len; if (el3_debug > 4) { - printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n", + pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n", dev->name, skb->len, inw(ioaddr + EL3_STATUS)); } #if 0 @@ -835,7 +833,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev) ushort status = inw(ioaddr + EL3_STATUS); if (status & 0x0001 /* IRQ line active, missed one. */ && inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */ - printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x" + pr_debug("%s: Missed interrupt, status then %04x now %04x" " Tx %2.2x Rx %4.4x.\n", dev->name, status, inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS), inw(ioaddr + RX_STATUS)); @@ -909,7 +907,7 @@ el3_interrupt(int irq, void *dev_id) if (el3_debug > 4) { status = inw(ioaddr + EL3_STATUS); - printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status); + pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status); } while ((status = inw(ioaddr + EL3_STATUS)) & @@ -920,7 +918,7 @@ el3_interrupt(int irq, void *dev_id) if (status & TxAvailable) { if (el3_debug > 5) - printk(KERN_DEBUG " TX room bit was handled.\n"); + pr_debug(" TX room bit was handled.\n"); /* There's room in the FIFO for a full-sized packet. */ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); netif_wake_queue (dev); @@ -958,7 +956,7 @@ el3_interrupt(int irq, void *dev_id) } if (--i < 0) { - printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n", + pr_err("%s: Infinite loop in interrupt, status %4.4x.\n", dev->name, status); /* Clear all interrupts. */ outw(AckIntr | 0xFF, ioaddr + EL3_CMD); @@ -969,7 +967,7 @@ el3_interrupt(int irq, void *dev_id) } if (el3_debug > 4) { - printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name, + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, inw(ioaddr + EL3_STATUS)); } spin_unlock(&lp->lock); @@ -1017,7 +1015,7 @@ static void update_stats(struct net_device *dev) int ioaddr = dev->base_addr; if (el3_debug > 5) - printk(" Updating the statistics.\n"); + pr_debug(" Updating the statistics.\n"); /* Turn off statistics updates while reading. */ outw(StatsDisable, ioaddr + EL3_CMD); /* Switch to the stats window, and read everything. */ @@ -1047,7 +1045,7 @@ el3_rx(struct net_device *dev) short rx_status; if (el3_debug > 5) - printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", + pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) { if (rx_status & 0x4000) { /* Error, update stats. */ @@ -1069,7 +1067,7 @@ el3_rx(struct net_device *dev) skb = dev_alloc_skb(pkt_len+5); if (el3_debug > 4) - printk("Receiving packet size %d status %4.4x.\n", + pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); if (skb != NULL) { skb_reserve(skb, 2); /* Align IP on 16 byte */ @@ -1088,12 +1086,12 @@ el3_rx(struct net_device *dev) outw(RxDiscard, ioaddr + EL3_CMD); dev->stats.rx_dropped++; if (el3_debug) - printk("%s: Couldn't allocate a sk_buff of size %d.\n", + pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len); } inw(ioaddr + EL3_STATUS); /* Delay. */ while (inw(ioaddr + EL3_STATUS) & 0x1000) - printk(KERN_DEBUG " Waiting for 3c509 to discard packet, status %x.\n", + pr_debug(" Waiting for 3c509 to discard packet, status %x.\n", inw(ioaddr + EL3_STATUS) ); } @@ -1114,7 +1112,7 @@ set_multicast_list(struct net_device *dev) static int old; if (old != dev->mc_count) { old = dev->mc_count; - printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count); + pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count); } } spin_lock_irqsave(&lp->lock, flags); @@ -1137,7 +1135,7 @@ el3_close(struct net_device *dev) struct el3_private *lp = netdev_priv(dev); if (el3_debug > 2) - printk("%s: Shutting down ethercard.\n", dev->name); + pr_debug("%s: Shutting down ethercard.\n", dev->name); el3_down(dev); @@ -1384,30 +1382,30 @@ el3_up(struct net_device *dev) EL3WINDOW(4); net_diag = inw(ioaddr + WN4_NETDIAG); net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */ - printk("%s: ", dev->name); + pr_info("%s: ", dev->name); switch (dev->if_port & 0x0c) { case 12: /* force full-duplex mode if 3c5x9b */ if (sw_info & 0x000f) { - printk("Forcing 3c5x9b full-duplex mode"); + pr_cont("Forcing 3c5x9b full-duplex mode"); break; } case 8: /* set full-duplex mode based on eeprom config setting */ if ((sw_info & 0x000f) && (sw_info & 0x8000)) { - printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); + pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); break; } default: /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */ - printk("Setting 3c5x9/3c5x9B half-duplex mode"); + pr_cont("Setting 3c5x9/3c5x9B half-duplex mode"); net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */ } outw(net_diag, ioaddr + WN4_NETDIAG); - printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); + pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); if (el3_debug > 3) - printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); + pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); /* Enable link beat and jabber check. */ outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA); } @@ -1535,7 +1533,7 @@ static int __init el3_init_module(void) } if (id_port >= 0x200) { id_port = 0; - printk(KERN_ERR "No I/O port available for 3c509 activation.\n"); + pr_err("No I/O port available for 3c509 activation.\n"); } else { ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS); if (!ret) -- cgit v1.1