From e9a6b45be580d648ed2f21646214733504bd4d6f Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 13:02:41 -0700 Subject: wimax/i2400m: i2400m's work queue should be initialized before RX support RX support is the only user of the work-queue, to process reports/notifications from the device. Thus, it needs the work queue to be initialized first. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/driver.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 86dd18a..006eb12 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -385,6 +385,11 @@ error: * Uploads firmware and brings up all the resources needed to be able * to communicate with the device. * + * The workqueue has to be setup early, at least before RX handling + * (it's only real user for now) so it can process reports as they + * arrive. We also want to destroy it if we retry, to make sure it is + * flushed...easier like this. + * * TX needs to be setup before the bus-specific code (otherwise on * shutdown, the bus-tx code could try to access it). */ @@ -410,15 +415,15 @@ retry: result = i2400m_rx_setup(i2400m); if (result < 0) goto error_rx_setup; - result = i2400m->bus_dev_start(i2400m); - if (result < 0) - goto error_bus_dev_start; i2400m->work_queue = create_singlethread_workqueue(wimax_dev->name); if (i2400m->work_queue == NULL) { result = -ENOMEM; dev_err(dev, "cannot create workqueue\n"); goto error_create_workqueue; } + result = i2400m->bus_dev_start(i2400m); + if (result < 0) + goto error_bus_dev_start; result = i2400m_firmware_check(i2400m); /* fw versions ok? */ if (result < 0) goto error_fw_check; @@ -440,10 +445,10 @@ retry: error_dev_initialize: error_check_mac_addr: error_fw_check: - destroy_workqueue(i2400m->work_queue); -error_create_workqueue: i2400m->bus_dev_stop(i2400m); error_bus_dev_start: + destroy_workqueue(i2400m->work_queue); +error_create_workqueue: i2400m_rx_release(i2400m); error_rx_setup: i2400m_tx_release(i2400m); @@ -479,7 +484,9 @@ int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags) * * Returns: 0 if ok, < 0 errno code on error. * - * Releases all the resources allocated to communicate with the device. + * Releases all the resources allocated to communicate with the + * device. Note we cannot destroy the workqueue earlier as until RX is + * fully destroyed, it could still try to schedule jobs. */ static void __i2400m_dev_stop(struct i2400m *i2400m) @@ -491,8 +498,8 @@ void __i2400m_dev_stop(struct i2400m *i2400m) wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING); i2400m_dev_shutdown(i2400m); i2400m->ready = 0; - destroy_workqueue(i2400m->work_queue); i2400m->bus_dev_stop(i2400m); + destroy_workqueue(i2400m->work_queue); i2400m_rx_release(i2400m); i2400m_tx_release(i2400m); wimax_state_change(wimax_dev, WIMAX_ST_DOWN); -- cgit v1.1