From e3fb20f9c8783d6e27cf84389a9606e410733eef Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 5 Oct 2009 16:47:34 -0600 Subject: PCI: PCIe portdrv: remove "-driver" from driver name No need to include "-driver" in the driver name. Signed-off-by: Bjorn Helgaas CC: Tom Long Nguyen Signed-off-by: Jesse Barnes --- drivers/pci/pcie/portdrv_pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 6df5c98..f635e47 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -30,7 +30,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* global data */ -static const char device_name[] = "pcieport-driver"; static int pcie_portdrv_restore_config(struct pci_dev *dev) { @@ -262,7 +261,7 @@ static struct pci_error_handlers pcie_portdrv_err_handler = { }; static struct pci_driver pcie_portdriver = { - .name = (char *)device_name, + .name = "pcieport", .id_table = &port_pci_ids[0], .probe = pcie_portdrv_probe, -- cgit v1.1 From b812cca4e2efe9a05de20ccf3f8587e7ac6e12fa Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 5 Oct 2009 16:38:13 -0600 Subject: PCI: remove pci_assign_resource_fixed() Adrian commented out this function in 2baad5f96b49, but I don't think it's even worth cluttering the file with the unused code. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/setup-res.c | 37 ------------------------------------- 1 file changed, 37 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 706f82d..c54526b 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -205,43 +205,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno) return ret; } -#if 0 -int pci_assign_resource_fixed(struct pci_dev *dev, int resno) -{ - struct pci_bus *bus = dev->bus; - struct resource *res = dev->resource + resno; - unsigned int type_mask; - int i, ret = -EBUSY; - - type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - - ret = request_resource(r, res); - - if (ret == 0) - break; - } - - if (ret) { - dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n", - resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res); - } else if (resno < PCI_BRIDGE_RESOURCES) { - pci_update_resource(dev, resno); - } - - return ret; -} -EXPORT_SYMBOL_GPL(pci_assign_resource_fixed); -#endif - /* Sort resources by alignment */ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) { -- cgit v1.1 From e13cdbd71fe12c4e191b737c4a3dbfdb4b2de03b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 5 Oct 2009 00:48:40 +0200 Subject: PCI PM: Read device power state from register after updating it After attempting to change the power state of a PCI device pci_raw_set_power_state() doesn't check if the value it wrote into the device's PCI_PM_CTRL register has been stored in there, but unconditionally modifies the device's current_state field to reflect the change. This may cause problems to happen if the power state of the device hasn't been changed in fact, because it will make the PCI PM core make a wrong assumption. To prevent such situations from happening modify pci_raw_set_power_state() so that it reads the device's PCI_PM_CTRL register after writing into it and uses the value read from the register to update the device's current_state field. Also make it print a message saying that the device refused to change its power state as requested (returning an error code in such cases would cause suspend regressions to appear on some systems, where device drivers' suspend routines return error codes if pci_set_power_state() fails). Reviewed-by: Alex Chiang Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6edecff..6e1da5a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -513,7 +513,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); - dev->current_state = state; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + if (dev->current_state != state && printk_ratelimit()) + dev_info(&dev->dev, "Refused to change power state, " + "currently in D%d\n", dev->current_state); /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning -- cgit v1.1 From 1f56f4a2b4d12c1c348cab23024024396ec7cddc Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Tue, 6 Oct 2009 09:19:45 -0500 Subject: PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers This quirk will disable fast back to back transfer on the secondary bus segment of the TI Bridge. Signed-off-by: Gabe Black Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6099fac..efa6534 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); +/* + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: + * Disable fast back-to-back on the secondary bus segment + */ +static void __devinit quirk_xio2000a(struct pci_dev *dev) +{ + struct pci_dev *pdev; + u16 command; + + dev_warn(&dev->dev, "TI XIO2000a quirk detected; " + "secondary bus fast back-to-back transfers disabled\n"); + list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { + pci_read_config_word(pdev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_FAST_BACK) + pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, + quirk_xio2000a); #ifdef CONFIG_X86_IO_APIC -- cgit v1.1 From 19eea630f7c56038dd80fe2f6910c78655bf29c8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 17 Sep 2009 15:28:22 -0700 Subject: PCI: pci.c: fix kernel-doc notation Fix kernel-doc notation (& warnings) in pci/pci.c. Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6e1da5a..3835871 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2546,10 +2546,10 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) /** * pci_set_vga_state - set VGA decode state on device and parents if requested - * @dev the PCI device - * @decode - true = enable decoding, false = disable decoding - * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge - traverse ancestors and change bridges + * @dev: the PCI device + * @decode: true = enable decoding, false = disable decoding + * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY + * @change_bridge: traverse ancestors and change bridges */ int pci_set_vga_state(struct pci_dev *dev, bool decode, unsigned int command_bits, bool change_bridge) -- cgit v1.1 From 308cf8e13f42f476dfd6552aeff58fdc0788e566 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Sep 2009 15:57:10 -0700 Subject: PCI: get larger bridge ranges when space is available Found one system: [ 71.120590] pci 0000:40:05.0: scanning behind bridge, config 4f4a40, pass 0 [ 71.138283] PCI: Scanning bus 0000:4a [ 71.140341] pci 0000:4a:00.0: found [15b3:6278] class 000c06 header type 00 [ 71.157173] pci 0000:4a:00.0: reg 10 64bit mmio: [0x000000-0x0fffff] [ 71.161697] pci 0000:4a:00.0: reg 18 64bit mmio pref: [0x000000-0x7fffff] [ 71.179403] pci 0000:4a:00.0: reg 20 64bit mmio pref: [0x000000-0xfffffff] [ 71.185366] pci 0000:4a:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 71.200846] pci 0000:4a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 71.219623] PCI: Fixups for bus 0000:4a [ 71.222194] pci 0000:40:05.0: bridge 32bit mmio: [0xcf000000-0xcf0fffff] [ 71.238662] pci 0000:40:05.0: bridge 64bit mmio pref: [0xcd800000-0xcdffffff] [ 71.255793] PCI: Bus scan for 0000:4a returning with max=4a Device needs a big pref mmio, but BIOS doesn't allocate mmio to it aside from a small MMIO range. Later, the kernel will not allocate resources to that to the device: [ 99.574030] pci 0000:4a:00.0: BAR 4: can't allocate mem resource [0xd0000000-0xcdffffff] [ 99.580102] pci 0000:4a:00.0: BAR 2: got res [0xcd800000-0xcdffffff] bus [0xcd800000-0xcdffffff] flags 0x12120c [ 99.602307] pci 0000:4a:00.0: BAR 2: moved to bus [0xcd800000-0xcdffffff] flags 0x12120c [ 99.615991] pci 0000:4a:00.0: BAR 0: got res [0xcf000000-0xcf0fffff] bus [0xcf000000-0xcf0fffff] flags 0x120204 [ 99.634499] pci 0000:4a:00.0: BAR 0: moved to bus [0xcf000000-0xcf0fffff] flags 0x120204 [ 99.654318] pci 0000:40:05.0: PCI bridge, secondary bus 0000:4a [ 99.658766] pci 0000:40:05.0: IO window: disabled [ 99.675478] pci 0000:40:05.0: MEM window: 0xcf000000-0xcf0fffff [ 99.681663] pci 0000:40:05.0: PREFETCH window: 0x000000cd800000-0x000000cdffffff So try to get a big range in the pci bridge if there is no child using that range. With the patch we get: [ 99.104525] pci 0000:4a:00.0: BAR 4: got res [0xfc080000000-0xfc08fffffff] bus [0xfc080000000-0xfc08fffffff] flags 0x12120c [ 99.123624] pci 0000:4a:00.0: BAR 4: moved to bus [0xfc080000000-0xfc08fffffff] flags 0x12120c [ 99.131977] pci 0000:4a:00.0: BAR 2: got res [0xfc090000000-0xfc0907fffff] bus [0xfc090000000-0xfc0907fffff] flags 0x12120c [ 99.149788] pci 0000:4a:00.0: BAR 2: moved to bus [0xfc090000000-0xfc0907fffff] flags 0x12120c [ 99.169248] pci 0000:4a:00.0: BAR 0: got res [0xc0200000-0xc02fffff] bus [0xc0200000-0xc02fffff] flags 0x120204 [ 99.189508] pci 0000:4a:00.0: BAR 0: moved to bus [0xc0200000-0xc02fffff] flags 0x120204 [ 99.206402] pci 0000:40:05.0: PCI bridge, secondary bus 0000:4a [ 99.210637] pci 0000:40:05.0: IO window: disabled [ 99.224856] pci 0000:40:05.0: MEM window: 0xc0200000-0xc03fffff [ 99.230019] pci 0000:40:05.0: PREFETCH window: 0x000fc080000000-0x000fc097ffffff Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index cb1a027..0959430 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -299,8 +299,17 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon r = bus->resource[i]; if (r == &ioport_resource || r == &iomem_resource) continue; - if (r && (r->flags & type_mask) == type && !r->parent) - return r; + if (r && (r->flags & type_mask) == type) { + if (!r->parent) + return r; + /* + * if there is no child under that, we should release + * and use it. don't need to reset it, pbus_size_* will + * set it again + */ + if (!r->child && !release_resource(r)) + return r; + } } return NULL; } -- cgit v1.1 From 30fc24b5cbc55f9e6c686e2710cc812419bddc0c Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 7 Oct 2009 09:28:56 -0700 Subject: PCI: Prevent AER driver from being loaded on non-root port PCIE devices A bug was seen on boards using a PLX 8518 switch device which advertises AER on each of it's transparent bridges. The AER driver was loaded for each bridge and this driver tried to access the AER source ID register whenever an interrupt occured on the shared PCI INTX lines. The source ID register does not exist on non root port PCIE device's which advertise AER and trying to access this register causes a unsupported request error on the bridge. Thus, when the next interrupt occurs, another error is found and the non existent source ID register is accessed again, and so it goes on. The result is a spammed dmesg with unsupported request PCI express errors on the bridge device that the AER driver is loaded against. Reported-by: Malcolm Crossley Signed-off-by: Kenji Kaneshige Tested-by: Malcolm Crossley Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aerdrv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 2ce8f9c..6bf5b15 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -52,7 +52,7 @@ static struct pci_error_handlers aer_error_handlers = { static struct pcie_port_service_driver aerdriver = { .name = "aer", - .port_type = PCIE_ANY_PORT, + .port_type = PCIE_RC_PORT, .service = PCIE_PORT_SERVICE_AER, .probe = aer_probe, -- cgit v1.1