From 2a49a78ed3c8d7c8319595270110c69f99c61a74 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:37:07 +0530
Subject: [SCSI] qla4xxx: added IPv6 support.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  40 +++++-
 drivers/scsi/qla4xxx/ql4_fw.h   |  45 ++++++-
 drivers/scsi/qla4xxx/ql4_init.c | 218 ++++++++++++++++++++++++------
 drivers/scsi/qla4xxx/ql4_mbx.c  | 284 +++++++++++++++++++++++++++-------------
 4 files changed, 445 insertions(+), 142 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 81b5f29..3175709 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -114,6 +114,7 @@
  */
 #define MAC_ADDR_LEN			6	/* in bytes */
 #define IP_ADDR_LEN			4	/* in bytes */
+#define IPv6_ADDR_LEN			16	/* IPv6 address size */
 #define DRIVER_NAME			"qla4xxx"
 
 #define MAX_LINKED_CMDS_PER_LUN		3
@@ -220,7 +221,7 @@ struct ddb_entry {
 
 	uint16_t os_target_id;	/* Target ID */
 	uint16_t fw_ddb_index;	/* DDB firmware index */
-	uint8_t reserved[2];
+	uint16_t options;
 	uint32_t fw_ddb_device_state; /* F/W Device State  -- see ql4_fw.h */
 
 	uint32_t CmdSn;
@@ -245,10 +246,18 @@ struct ddb_entry {
 
 	uint16_t port;
 	uint32_t tpgt;
-	uint8_t ip_addr[ISCSI_IPADDR_SIZE];
+	uint8_t ip_addr[IP_ADDR_LEN];
 	uint8_t iscsi_name[ISCSI_NAME_SIZE];	/* 72 x48 */
 	uint8_t iscsi_alias[0x20];
 	uint8_t isid[6];
+	uint16_t iscsi_max_burst_len;
+	uint16_t iscsi_max_outsnd_r2t;
+	uint16_t iscsi_first_burst_len;
+	uint16_t iscsi_max_rcv_data_seg_len;
+	uint16_t iscsi_max_snd_data_seg_len;
+
+	struct in6_addr remote_ipv6_addr;
+	struct in6_addr link_local_ipv6_addr;
 };
 
 /*
@@ -441,8 +450,35 @@ struct scsi_qla_host {
 
 	/* Saved srb for status continuation entry processing */
 	struct srb *status_srb;
+
+	/* IPv6 support info from InitFW */
+	uint8_t acb_version;
+	uint8_t ipv4_addr_state;
+	uint16_t ipv4_options;
+
+	uint32_t resvd2;
+	uint32_t ipv6_options;
+	uint32_t ipv6_addl_options;
+	uint8_t ipv6_link_local_state;
+	uint8_t ipv6_addr0_state;
+	uint8_t ipv6_addr1_state;
+	uint8_t ipv6_default_router_state;
+	struct in6_addr ipv6_link_local_addr;
+	struct in6_addr ipv6_addr0;
+	struct in6_addr ipv6_addr1;
+	struct in6_addr ipv6_default_router_addr;
 };
 
+static inline int is_ipv4_enabled(struct scsi_qla_host *ha)
+{
+	return ((ha->ipv4_options & IPOPT_IPv4_PROTOCOL_ENABLE) != 0);
+}
+
+static inline int is_ipv6_enabled(struct scsi_qla_host *ha)
+{
+	return ((ha->ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE) != 0);
+}
+
 static inline int is_qla4010(struct scsi_qla_host *ha)
 {
 	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP4010;
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 9cd7a60..dfe7b4d 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -258,13 +258,15 @@ union external_hw_config_reg {
 /* Mailbox 1 */
 #define FW_STATE_READY				0x0000
 #define FW_STATE_CONFIG_WAIT			0x0001
-#define FW_STATE_WAIT_LOGIN			0x0002
+#define FW_STATE_WAIT_AUTOCONNECT		0x0002
 #define FW_STATE_ERROR				0x0004
-#define FW_STATE_DHCP_IN_PROGRESS		0x0008
+#define FW_STATE_CONFIGURING_IP			0x0008
 
 /* Mailbox 3 */
 #define FW_ADDSTATE_OPTICAL_MEDIA		0x0001
-#define FW_ADDSTATE_DHCP_ENABLED		0x0002
+#define FW_ADDSTATE_DHCPv4_ENABLED		0x0002
+#define FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED	0x0004
+#define FW_ADDSTATE_DHCPv4_LEASE_EXPIRED	0x0008
 #define FW_ADDSTATE_LINK_UP			0x0010
 #define FW_ADDSTATE_ISNS_SVC_ENABLED		0x0020
 #define MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS	0x006B
@@ -320,6 +322,8 @@ union external_hw_config_reg {
 /* Host Adapter Initialization Control Block (from host) */
 struct addr_ctrl_blk {
 	uint8_t version;	/* 00 */
+#define  IFCB_VER_MIN			0x01
+#define  IFCB_VER_MAX			0x02
 	uint8_t control;	/* 01 */
 
 	uint16_t fw_options;	/* 02-03 */
@@ -351,11 +355,16 @@ struct addr_ctrl_blk {
 	uint16_t iscsi_opts;	/* 30-31 */
 	uint16_t ipv4_tcp_opts;	/* 32-33 */
 	uint16_t ipv4_ip_opts;	/* 34-35 */
+#define  IPOPT_IPv4_PROTOCOL_ENABLE	0x8000
 
 	uint16_t iscsi_max_pdu_size;	/* 36-37 */
 	uint8_t ipv4_tos;	/* 38 */
 	uint8_t ipv4_ttl;	/* 39 */
 	uint8_t acb_version;	/* 3A */
+#define ACB_NOT_SUPPORTED		0x00
+#define ACB_SUPPORTED			0x02 /* Capable of ACB Version 2
+						Features */
+
 	uint8_t res2;	/* 3B */
 	uint16_t def_timeout;	/* 3C-3D */
 	uint16_t iscsi_fburst_len;	/* 3E-3F */
@@ -397,16 +406,35 @@ struct addr_ctrl_blk {
 	uint32_t cookie;	/* 200-203 */
 	uint16_t ipv6_port;	/* 204-205 */
 	uint16_t ipv6_opts;	/* 206-207 */
+#define IPV6_OPT_IPV6_PROTOCOL_ENABLE	0x8000
+
 	uint16_t ipv6_addtl_opts;	/* 208-209 */
+#define IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE	0x0002 /* Pri ACB
+								  Only */
+#define IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR		0x0001
+
 	uint16_t ipv6_tcp_opts;	/* 20A-20B */
 	uint8_t ipv6_tcp_wsf;	/* 20C */
 	uint16_t ipv6_flow_lbl;	/* 20D-20F */
-	uint8_t ipv6_gw_addr[16];	/* 210-21F */
+	uint8_t ipv6_dflt_rtr_addr[16]; /* 210-21F */
 	uint16_t ipv6_vlan_tag;	/* 220-221 */
 	uint8_t ipv6_lnk_lcl_addr_state;/* 222 */
 	uint8_t ipv6_addr0_state;	/* 223 */
 	uint8_t ipv6_addr1_state;	/* 224 */
-	uint8_t ipv6_gw_state;	/* 225 */
+#define IP_ADDRSTATE_UNCONFIGURED	0
+#define IP_ADDRSTATE_INVALID		1
+#define IP_ADDRSTATE_ACQUIRING		2
+#define IP_ADDRSTATE_TENTATIVE		3
+#define IP_ADDRSTATE_DEPRICATED		4
+#define IP_ADDRSTATE_PREFERRED		5
+#define IP_ADDRSTATE_DISABLING		6
+
+	uint8_t ipv6_dflt_rtr_state;    /* 225 */
+#define IPV6_RTRSTATE_UNKNOWN                   0
+#define IPV6_RTRSTATE_MANUAL                    1
+#define IPV6_RTRSTATE_ADVERTISED                3
+#define IPV6_RTRSTATE_STALE                     4
+
 	uint8_t ipv6_traffic_class;	/* 226 */
 	uint8_t ipv6_hop_limit;	/* 227 */
 	uint8_t ipv6_if_id[8];	/* 228-22F */
@@ -424,7 +452,7 @@ struct addr_ctrl_blk {
 
 struct init_fw_ctrl_blk {
 	struct addr_ctrl_blk pri;
-	struct addr_ctrl_blk sec;
+/*	struct addr_ctrl_blk sec;*/
 };
 
 /*************************************************************************/
@@ -433,6 +461,9 @@ struct dev_db_entry {
 	uint16_t options;	/* 00-01 */
 #define DDB_OPT_DISC_SESSION  0x10
 #define DDB_OPT_TARGET	      0x02 /* device is a target */
+#define DDB_OPT_IPV6_DEVICE	0x100
+#define DDB_OPT_IPV6_NULL_LINK_LOCAL		0x800 /* post connection */
+#define DDB_OPT_IPV6_FW_DEFINED_LINK_LOCAL	0x800 /* pre connection */
 
 	uint16_t exec_throttle;	/* 02-03 */
 	uint16_t exec_count;	/* 04-05 */
@@ -468,7 +499,7 @@ struct dev_db_entry {
 					 * pointer to a string so we
 					 * don't have to reserve soooo
 					 * much RAM */
-	uint8_t ipv6_addr[0x10];/* 1A0-1AF */
+	uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */
 	uint8_t res5[0x10];	/* 1B0-1BF */
 	uint16_t ddb_link;	/* 1C0-1C1 */
 	uint16_t chap_tbl_idx;	/* 1C2-1C3 */
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 92329a4..36ec02c 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -189,6 +189,78 @@ static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
 	return qla4xxx_get_firmware_status(ha);
 }
 
+static uint8_t
+qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha)
+{
+	uint8_t ipv4_wait = 0;
+	uint8_t ipv6_wait = 0;
+	int8_t ip_address[IPv6_ADDR_LEN] = {0} ;
+
+	/* If both IPv4 & IPv6 are enabled, possibly only one
+	 * IP address may be acquired, so check to see if we
+	 * need to wait for another */
+	if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) {
+		if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) &&
+		    ((ha->addl_fw_state &
+				    FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) {
+			ipv4_wait = 1;
+		}
+		if (((ha->ipv6_addl_options &
+			    IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
+		    ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) {
+
+			ipv6_wait = 1;
+
+			if ((ha->ipv6_link_local_state ==
+						     IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "Preferred IP configured."
+					      " Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if (memcmp(&ha->ipv6_default_router_addr, ip_address,
+				IPv6_ADDR_LEN) == 0) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "No Router configured. "
+					      "Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if ((ha->ipv6_default_router_state ==
+						IPV6_RTRSTATE_MANUAL) &&
+			    (ha->ipv6_link_local_state ==
+						IP_ADDRSTATE_TENTATIVE) &&
+			    (memcmp(&ha->ipv6_link_local_addr,
+				    &ha->ipv6_default_router_addr, 4) == 0)) {
+				DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
+					"IP configured. Don't wait!\n",
+					ha->host_no, __func__));
+				ipv6_wait = 0;
+			}
+		}
+		if (ipv4_wait || ipv6_wait) {
+			DEBUG2(printk("scsi%ld: %s: Wait for additional "
+				      "IP(s) \"", ha->host_no, __func__));
+			if (ipv4_wait)
+				DEBUG2(printk("IPv4 "));
+			if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6LinkLocal "));
+			if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr0 "));
+			if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr1 "));
+			DEBUG2(printk("\"\n"));
+		}
+	}
+
+	return ipv4_wait|ipv6_wait;
+}
+
 static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 {
 	uint32_t timeout_count;
@@ -226,38 +298,80 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 			continue;
 		}
 
+		if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      "AUTOCONNECT in progress\n",
+				      ha->host_no, __func__));
+		}
+
+		if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      " CONFIGURING IP\n",
+				      ha->host_no, __func__));
+			/*
+			 * Check for link state after 15 secs and if link is
+			 * still DOWN then, cable is unplugged. Ignore "DHCP
+			 * in Progress/CONFIGURING IP" bit to check if firmware
+			 * is in ready state or not after 15 secs.
+			 * This is applicable for both 2.x & 3.x firmware
+			 */
+			if (timeout_count <= (ADAPTER_INIT_TOV - 15)) {
+				if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
+						  " LINK UP (Cable plugged)\n",
+						  ha->host_no, __func__));
+				} else if (ha->firmware_state &
+					  (FW_STATE_CONFIGURING_IP |
+							     FW_STATE_READY)) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+						"LINK DOWN (Cable unplugged)\n",
+						ha->host_no, __func__));
+					ha->firmware_state = FW_STATE_READY;
+				}
+			}
+		}
+
 		if (ha->firmware_state == FW_STATE_READY) {
-			DEBUG2(dev_info(&ha->pdev->dev, "Firmware Ready..\n"));
-			/* The firmware is ready to process SCSI commands. */
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: MEDIA TYPE - %s\n",
-					  ha->host_no,
-					  __func__, (ha->addl_fw_state &
-						     FW_ADDSTATE_OPTICAL_MEDIA)
-					  != 0 ? "OPTICAL" : "COPPER"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: DHCP STATE Enabled "
-					  "%s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_DHCP_ENABLED) != 0 ?
-					  "YES" : "NO"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: LINK %s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_LINK_UP) != 0 ?
-					  "UP" : "DOWN"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: iSNS Service "
-					  "Started %s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
-					  "YES" : "NO"));
-
-			ready = 1;
-			break;
+			/* If DHCP IP Addr is available, retrieve it now. */
+			if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR,
+								&ha->dpc_flags))
+				qla4xxx_get_dhcp_ip_address(ha);
+
+			if (!qla4xxx_wait_for_ip_config(ha) ||
+							timeout_count == 1) {
+				DEBUG2(dev_info(&ha->pdev->dev,
+						"Firmware Ready..\n"));
+				/* The firmware is ready to process SCSI
+				   commands. */
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: MEDIA TYPE"
+					" - %s\n", ha->host_no,
+					__func__, (ha->addl_fw_state &
+					FW_ADDSTATE_OPTICAL_MEDIA)
+					!= 0 ? "OPTICAL" : "COPPER"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: DHCPv4 STATE"
+					" Enabled %s\n", ha->host_no,
+					 __func__, (ha->addl_fw_state &
+					 FW_ADDSTATE_DHCPv4_ENABLED) != 0 ?
+					"YES" : "NO"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: LINK %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_LINK_UP) != 0 ?
+					"UP" : "DOWN"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: iSNS Service "
+					"Started %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
+					"YES" : "NO"));
+
+				ready = 1;
+				break;
+			}
 		}
 		DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
 			      "seconds expired= %d\n", ha->host_no, __func__,
@@ -272,15 +386,19 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 		msleep(1000);
 	}			/* end of for */
 
-	if (timeout_count == 0)
+	if (timeout_count <= 0)
 		DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
 			      ha->host_no, __func__));
 
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)  {
-		DEBUG2(printk("scsi%ld: %s: FW is reporting its waiting to"
-			      " grab an IP address from DHCP server\n",
-			      ha->host_no, __func__));
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
+			      "it's waiting to configure an IP address\n",
+			       ha->host_no, __func__));
 		ready = 1;
+	} else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but "
+			      "auto-discovery still in process\n",
+			       ha->host_no, __func__));
 	}
 
 	return ready;
@@ -419,6 +537,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	}
 
 	status = QLA_SUCCESS;
+	ddb_entry->options = le16_to_cpu(fw_ddb_entry->options);
 	ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid);
 	ddb_entry->task_mgmt_timeout =
 		le16_to_cpu(fw_ddb_entry->def_timeout);
@@ -442,11 +561,30 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0],
 	       min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr)));
 
+	ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len;
+	ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t;
+	ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len;
+	ddb_entry->iscsi_max_rcv_data_seg_len =
+				fw_ddb_entry->iscsi_max_rcv_data_seg_len;
+	ddb_entry->iscsi_max_snd_data_seg_len =
+				fw_ddb_entry->iscsi_max_snd_data_seg_len;
+
+	if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) {
+		memcpy(&ddb_entry->remote_ipv6_addr,
+			fw_ddb_entry->ip_addr,
+			min(sizeof(ddb_entry->remote_ipv6_addr),
+			sizeof(fw_ddb_entry->ip_addr)));
+		memcpy(&ddb_entry->link_local_ipv6_addr,
+			fw_ddb_entry->link_local_ipv6_addr,
+			min(sizeof(ddb_entry->link_local_ipv6_addr),
+			sizeof(fw_ddb_entry->link_local_ipv6_addr)));
+	}
+
 	DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n",
-		      ha->host_no, __func__, fw_ddb_index,
-		      ddb_entry->fw_ddb_device_state, status));
+			ha->host_no, __func__, fw_ddb_index,
+			ddb_entry->fw_ddb_device_state, status));
 
- exit_update_ddb:
+exit_update_ddb:
 	if (fw_ddb_entry)
 		dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
 				  fw_ddb_entry, fw_ddb_entry_dma);
@@ -1166,7 +1304,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 	 * the ddb_list and wait for DHCP lease acquired aen to come in
 	 * followed by 0x8014 aen" to trigger the tgt discovery process.
 	 */
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP)
 		goto exit_init_online;
 
 	/* Skip device discovery if ip and subnet is zero */
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 09d6d4b..43581ce 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -172,108 +172,207 @@ mbox_exit:
 	return status;
 }
 
+uint8_t
+qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
+		 uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
+{
+	memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
+	memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+	mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
+	mbox_cmd[1] = 0;
+	mbox_cmd[2] = LSDW(init_fw_cb_dma);
+	mbox_cmd[3] = MSDW(init_fw_cb_dma);
+	mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
+	mbox_cmd[5] = (IFCB_VER_MAX << 8) | IFCB_VER_MIN;
+
+	if (qla4xxx_mailbox_command(ha, 6, 6, mbox_cmd, mbox_sts) !=
+	    QLA_SUCCESS) {
+		DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
+			      "MBOX_CMD_INITIALIZE_FIRMWARE"
+			      " failed w/ status %04X\n",
+			      ha->host_no, __func__, mbox_sts[0]));
+		return QLA_ERROR;
+	}
+	return QLA_SUCCESS;
+}
+
+uint8_t
+qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
+		 uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
+{
+	memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
+	memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+	mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
+	mbox_cmd[2] = LSDW(init_fw_cb_dma);
+	mbox_cmd[3] = MSDW(init_fw_cb_dma);
+	mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
+
+	if (qla4xxx_mailbox_command(ha, 5, 5, mbox_cmd, mbox_sts) !=
+	    QLA_SUCCESS) {
+		DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
+			      "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK"
+			      " failed w/ status %04X\n",
+			      ha->host_no, __func__, mbox_sts[0]));
+		return QLA_ERROR;
+	}
+	return QLA_SUCCESS;
+}
+
+void
+qla4xxx_update_local_ip(struct scsi_qla_host *ha,
+			 struct addr_ctrl_blk  *init_fw_cb)
+{
+	/* Save IPv4 Address Info */
+	memcpy(ha->ip_address, init_fw_cb->ipv4_addr,
+		min(sizeof(ha->ip_address), sizeof(init_fw_cb->ipv4_addr)));
+	memcpy(ha->subnet_mask, init_fw_cb->ipv4_subnet,
+		min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->ipv4_subnet)));
+	memcpy(ha->gateway, init_fw_cb->ipv4_gw_addr,
+		min(sizeof(ha->gateway), sizeof(init_fw_cb->ipv4_gw_addr)));
+
+	if (is_ipv6_enabled(ha)) {
+		/* Save IPv6 Address */
+		ha->ipv6_link_local_state = init_fw_cb->ipv6_lnk_lcl_addr_state;
+		ha->ipv6_addr0_state = init_fw_cb->ipv6_addr0_state;
+		ha->ipv6_addr1_state = init_fw_cb->ipv6_addr1_state;
+		ha->ipv6_default_router_state = init_fw_cb->ipv6_dflt_rtr_state;
+		ha->ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE;
+		ha->ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80;
+
+		memcpy(&ha->ipv6_link_local_addr.in6_u.u6_addr8[8],
+			init_fw_cb->ipv6_if_id,
+			min(sizeof(ha->ipv6_link_local_addr)/2,
+			sizeof(init_fw_cb->ipv6_if_id)));
+		memcpy(&ha->ipv6_addr0, init_fw_cb->ipv6_addr0,
+			min(sizeof(ha->ipv6_addr0),
+			sizeof(init_fw_cb->ipv6_addr0)));
+		memcpy(&ha->ipv6_addr1, init_fw_cb->ipv6_addr1,
+			min(sizeof(ha->ipv6_addr1),
+			sizeof(init_fw_cb->ipv6_addr1)));
+		memcpy(&ha->ipv6_default_router_addr,
+			init_fw_cb->ipv6_dflt_rtr_addr,
+			min(sizeof(ha->ipv6_default_router_addr),
+			sizeof(init_fw_cb->ipv6_dflt_rtr_addr)));
+	}
+}
+
+uint8_t
+qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
+			  uint32_t *mbox_cmd,
+			  uint32_t *mbox_sts,
+			  struct addr_ctrl_blk  *init_fw_cb,
+			  dma_addr_t init_fw_cb_dma)
+{
+	if (qla4xxx_get_ifcb(ha, mbox_cmd, mbox_sts, init_fw_cb_dma)
+	    != QLA_SUCCESS) {
+		DEBUG2(printk(KERN_WARNING
+			      "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
+			      ha->host_no, __func__));
+		return QLA_ERROR;
+	}
+
+	DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk)));
+
+	/* Save some info in adapter structure. */
+	ha->acb_version = init_fw_cb->acb_version;
+	ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options);
+	ha->tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts);
+	ha->ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts);
+	ha->ipv4_addr_state = le16_to_cpu(init_fw_cb->ipv4_addr_state);
+	ha->heartbeat_interval = init_fw_cb->hb_interval;
+	memcpy(ha->name_string, init_fw_cb->iscsi_name,
+		min(sizeof(ha->name_string),
+		sizeof(init_fw_cb->iscsi_name)));
+	/*memcpy(ha->alias, init_fw_cb->Alias,
+	       min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
+
+	/* Save Command Line Paramater info */
+	ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout);
+	ha->discovery_wait = ql4xdiscoverywait;
+
+	if (ha->acb_version == ACB_SUPPORTED) {
+		ha->ipv6_options = init_fw_cb->ipv6_opts;
+		ha->ipv6_addl_options = init_fw_cb->ipv6_addtl_opts;
+	}
+	qla4xxx_update_local_ip(ha, init_fw_cb);
+
+	return QLA_SUCCESS;
+}
+
 /**
  * qla4xxx_initialize_fw_cb - initializes firmware control block.
  * @ha: Pointer to host adapter structure.
  **/
 int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 {
-	struct init_fw_ctrl_blk *init_fw_cb;
+	struct addr_ctrl_blk *init_fw_cb;
 	dma_addr_t init_fw_cb_dma;
 	uint32_t mbox_cmd[MBOX_REG_COUNT];
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 	int status = QLA_ERROR;
 
 	init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
-					sizeof(struct init_fw_ctrl_blk),
+					sizeof(struct addr_ctrl_blk),
 					&init_fw_cb_dma, GFP_KERNEL);
 	if (init_fw_cb == NULL) {
 		DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
 			      ha->host_no, __func__));
 		return 10;
 	}
-	memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
+	memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 
 	/* Get Initialize Firmware Control Block. */
 	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 	memset(&mbox_sts, 0, sizeof(mbox_sts));
 
-	mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
-	mbox_cmd[2] = LSDW(init_fw_cb_dma);
-	mbox_cmd[3] = MSDW(init_fw_cb_dma);
-	mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
-
-	if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
+	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
 		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct init_fw_ctrl_blk),
+				  sizeof(struct addr_ctrl_blk),
 				  init_fw_cb, init_fw_cb_dma);
-		return status;
+		goto exit_init_fw_cb;
 	}
 
 	/* Initialize request and response queues. */
 	qla4xxx_init_rings(ha);
 
 	/* Fill in the request and response queue information. */
-	init_fw_cb->pri.rqq_consumer_idx = cpu_to_le16(ha->request_out);
-	init_fw_cb->pri.compq_producer_idx = cpu_to_le16(ha->response_in);
-	init_fw_cb->pri.rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
-	init_fw_cb->pri.compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
-	init_fw_cb->pri.rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
-	init_fw_cb->pri.rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
-	init_fw_cb->pri.compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
-	init_fw_cb->pri.compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
-	init_fw_cb->pri.shdwreg_addr_lo =
-		cpu_to_le32(LSDW(ha->shadow_regs_dma));
-	init_fw_cb->pri.shdwreg_addr_hi =
-		cpu_to_le32(MSDW(ha->shadow_regs_dma));
+	init_fw_cb->rqq_consumer_idx = cpu_to_le16(ha->request_out);
+	init_fw_cb->compq_producer_idx = cpu_to_le16(ha->response_in);
+	init_fw_cb->rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH);
+	init_fw_cb->compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH);
+	init_fw_cb->rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma));
+	init_fw_cb->rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma));
+	init_fw_cb->compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma));
+	init_fw_cb->compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma));
+	init_fw_cb->shdwreg_addr_lo = cpu_to_le32(LSDW(ha->shadow_regs_dma));
+	init_fw_cb->shdwreg_addr_hi = cpu_to_le32(MSDW(ha->shadow_regs_dma));
 
 	/* Set up required options. */
-	init_fw_cb->pri.fw_options |=
+	init_fw_cb->fw_options |=
 		__constant_cpu_to_le16(FWOPT_SESSION_MODE |
 				       FWOPT_INITIATOR_MODE);
-	init_fw_cb->pri.fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
+	init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
 
-	/* Save some info in adapter structure. */
-	ha->firmware_options = le16_to_cpu(init_fw_cb->pri.fw_options);
-	ha->tcp_options = le16_to_cpu(init_fw_cb->pri.ipv4_tcp_opts);
-	ha->heartbeat_interval = init_fw_cb->pri.hb_interval;
-	memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
-	       min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
-	memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
-	       min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
-	memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
-	       min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));
-	memcpy(ha->name_string, init_fw_cb->pri.iscsi_name,
-	       min(sizeof(ha->name_string),
-		   sizeof(init_fw_cb->pri.iscsi_name)));
-	/*memcpy(ha->alias, init_fw_cb->Alias,
-	       min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
-
-	/* Save Command Line Paramater info */
-	ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout);
-	ha->discovery_wait = ql4xdiscoverywait;
-
-	/* Send Initialize Firmware Control Block. */
-	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
-	memset(&mbox_sts, 0, sizeof(mbox_sts));
-
-	mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
-	mbox_cmd[1] = 0;
-	mbox_cmd[2] = LSDW(init_fw_cb_dma);
-	mbox_cmd[3] = MSDW(init_fw_cb_dma);
-	mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
+	if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
+		!= QLA_SUCCESS) {
+		DEBUG2(printk(KERN_WARNING
+			      "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n",
+			      ha->host_no, __func__));
+		goto exit_init_fw_cb;
+	}
 
-	if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) ==
-	    QLA_SUCCESS)
-		status = QLA_SUCCESS;
-	 else {
-		DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE "
-			      "failed w/ status %04X\n", ha->host_no, __func__,
-			      mbox_sts[0]));
+	if (qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0],
+		init_fw_cb, init_fw_cb_dma) != QLA_SUCCESS) {
+		DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
+				ha->host_no, __func__));
+		goto exit_init_fw_cb;
 	}
-	dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
-			  init_fw_cb, init_fw_cb_dma);
+	status = QLA_SUCCESS;
+
+exit_init_fw_cb:
+	dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
+				init_fw_cb, init_fw_cb_dma);
 
 	return status;
 }
@@ -284,13 +383,13 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
  **/
 int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 {
-	struct init_fw_ctrl_blk *init_fw_cb;
+	struct addr_ctrl_blk *init_fw_cb;
 	dma_addr_t init_fw_cb_dma;
 	uint32_t mbox_cmd[MBOX_REG_COUNT];
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 
 	init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
-					sizeof(struct init_fw_ctrl_blk),
+					sizeof(struct addr_ctrl_blk),
 					&init_fw_cb_dma, GFP_KERNEL);
 	if (init_fw_cb == NULL) {
 		printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
@@ -299,35 +398,21 @@ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 	}
 
 	/* Get Initialize Firmware Control Block. */
-	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
-	memset(&mbox_sts, 0, sizeof(mbox_sts));
-
-	memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk));
-	mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK;
-	mbox_cmd[2] = LSDW(init_fw_cb_dma);
-	mbox_cmd[3] = MSDW(init_fw_cb_dma);
-	mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk);
-
-	if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) !=
+	memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
+	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
 		DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
 			      ha->host_no, __func__));
 		dma_free_coherent(&ha->pdev->dev,
-				  sizeof(struct init_fw_ctrl_blk),
+				  sizeof(struct addr_ctrl_blk),
 				  init_fw_cb, init_fw_cb_dma);
 		return QLA_ERROR;
 	}
 
 	/* Save IP Address. */
-	memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr,
-	       min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr)));
-	memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet,
-	       min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet)));
-	memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr,
-	       min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr)));
-
-	dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk),
-			  init_fw_cb, init_fw_cb_dma);
+	qla4xxx_update_local_ip(ha, init_fw_cb);
+	dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk),
+				init_fw_cb, init_fw_cb_dma);
 
 	return QLA_SUCCESS;
 }
@@ -409,6 +494,7 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 			    uint16_t *connection_id)
 {
 	int status = QLA_ERROR;
+	uint16_t options;
 	uint32_t mbox_cmd[MBOX_REG_COUNT];
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 
@@ -441,14 +527,26 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha,
 		goto exit_get_fwddb;
 	}
 	if (fw_ddb_entry) {
-		dev_info(&ha->pdev->dev, "DDB[%d] MB0 %04x Tot %d Next %d "
-			   "State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n",
-			   fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3],
-			   mbox_sts[4], mbox_sts[5], fw_ddb_entry->ip_addr[0],
-			   fw_ddb_entry->ip_addr[1], fw_ddb_entry->ip_addr[2],
-			   fw_ddb_entry->ip_addr[3],
-			   le16_to_cpu(fw_ddb_entry->port),
-			   fw_ddb_entry->iscsi_name);
+		options = le16_to_cpu(fw_ddb_entry->options);
+		if (options & DDB_OPT_IPV6_DEVICE) {
+			dev_info(&ha->pdev->dev, "%s: DDB[%d] MB0 %04x Tot %d "
+				"Next %d State %04x ConnErr %08x %pI6 "
+				":%04d \"%s\"\n", __func__, fw_ddb_index,
+				mbox_sts[0], mbox_sts[2], mbox_sts[3],
+				mbox_sts[4], mbox_sts[5],
+				fw_ddb_entry->ip_addr,
+				le16_to_cpu(fw_ddb_entry->port),
+				fw_ddb_entry->iscsi_name);
+		} else {
+			dev_info(&ha->pdev->dev, "%s: DDB[%d] MB0 %04x Tot %d "
+				"Next %d State %04x ConnErr %08x %pI4 "
+				":%04d \"%s\"\n", __func__, fw_ddb_index,
+				mbox_sts[0], mbox_sts[2], mbox_sts[3],
+				mbox_sts[4], mbox_sts[5],
+				fw_ddb_entry->ip_addr,
+				le16_to_cpu(fw_ddb_entry->port),
+				fw_ddb_entry->iscsi_name);
+		}
 	}
 	if (num_valid_ddb_entries)
 		*num_valid_ddb_entries = mbox_sts[2];
-- 
cgit v1.1


From 065aa1b4db63c7fa68a3e889510c4e63404a1ac7 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:38:11 +0530
Subject: [SCSI] qla4xxx: set device state as per Link UP and LINK DOWN

Link Down -> Mark all devices missing
 Previously, the driver took no action on a Link Down,
 and waited for the I/O on a dead connection to timeout
 in the firmware before marking the DDB missing.

Link Up -> Mark all devices online
 F/W will do auto login to all the devices only once.
 After that its the responsibility of the driver to
 relogin to devices whenever there is :
        * Any sort of connection failure or
        * KATO expires indicating target has logged out or
        * I/O times out etc.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  1 +
 drivers/scsi/qla4xxx/ql4_init.c | 12 +++++++---
 drivers/scsi/qla4xxx/ql4_isr.c  | 15 +++++++++----
 drivers/scsi/qla4xxx/ql4_os.c   | 49 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 70 insertions(+), 7 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 3175709..347a7c8 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -310,6 +310,7 @@ struct scsi_qla_host {
 #define DPC_ISNS_RESTART		7 /* 0x00000080 */
 #define DPC_AEN				9 /* 0x00000200 */
 #define DPC_GET_DHCP_IP_ADDR		15 /* 0x00008000 */
+#define DPC_LINK_CHANGED		18 /* 0x00040000 */
 
 	struct Scsi_Host *host; /* pointer to host data */
 	uint32_t tot_ddbs;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 36ec02c..7f6cc2e 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1279,6 +1279,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 	int status = QLA_ERROR;
 	int8_t ip_address[IP_ADDR_LEN] = {0} ;
 
+	clear_bit(AF_ONLINE, &ha->flags);
 	ha->eeprom_cmd_data = 0;
 
 	qla4x00_pci_config(ha);
@@ -1456,10 +1457,15 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
 		 * the device came back.
 		 */
 	} else {
-		/* Device went away, try to relogin. */
-		/* Mark device missing */
-		if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
+		/* Device went away, mark device missing */
+		if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) {
+			DEBUG2(dev_info(&ha->pdev->dev, "%s mark missing "
+					"ddb_entry 0x%p sess 0x%p conn 0x%p\n",
+					__func__, ddb_entry,
+					ddb_entry->sess, ddb_entry->conn));
 			qla4xxx_mark_device_missing(ha, ddb_entry);
+		}
+
 		/*
 		 * Relogin if device state changed to a not active state.
 		 * However, do not relogin if this aen is a result of an IOCTL
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index c196d55..9db286d 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -498,15 +498,22 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			break;
 
 		case MBOX_ASTS_LINK_UP:
-			DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK UP\n",
-				      ha->host_no, mbox_status));
 			set_bit(AF_LINK_UP, &ha->flags);
+			if (test_bit(AF_INIT_DONE, &ha->flags))
+				set_bit(DPC_LINK_CHANGED, &ha->dpc_flags);
+
+			DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter"
+					" LINK UP\n", ha->host_no,
+					mbox_status));
 			break;
 
 		case MBOX_ASTS_LINK_DOWN:
-			DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK DOWN\n",
-				      ha->host_no, mbox_status));
 			clear_bit(AF_LINK_UP, &ha->flags);
+			set_bit(DPC_LINK_CHANGED, &ha->dpc_flags);
+
+			DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter"
+					" LINK DOWN\n", ha->host_no,
+					mbox_status));
 			break;
 
 		case MBOX_ASTS_HEARTBEAT:
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 2ccad36..d6c8b42 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -685,6 +685,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha)
 	     test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
 	     test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
 	     test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) ||
+	     test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) ||
 	     test_bit(DPC_AEN, &ha->dpc_flags)) &&
 	     ha->dpc_thread) {
 		DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
@@ -1069,6 +1070,54 @@ static void qla4xxx_do_dpc(struct work_struct *work)
 	if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
 		qla4xxx_get_dhcp_ip_address(ha);
 
+	/* ---- link change? --- */
+	if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) {
+		if (!test_bit(AF_LINK_UP, &ha->flags)) {
+			/* ---- link down? --- */
+			list_for_each_entry_safe(ddb_entry, dtemp,
+						 &ha->ddb_list, list) {
+				if (atomic_read(&ddb_entry->state) ==
+						DDB_STATE_ONLINE)
+					qla4xxx_mark_device_missing(ha,
+							ddb_entry);
+			}
+		} else {
+			/* ---- link up? --- *
+			 * F/W will auto login to all devices ONLY ONCE after
+			 * link up during driver initialization and runtime
+			 * fatal error recovery.  Therefore, the driver must
+			 * manually relogin to devices when recovering from
+			 * connection failures, logouts, expired KATO, etc. */
+
+			list_for_each_entry_safe(ddb_entry, dtemp,
+							&ha->ddb_list, list) {
+				if ((atomic_read(&ddb_entry->state) ==
+						 DDB_STATE_MISSING) ||
+				    (atomic_read(&ddb_entry->state) ==
+						 DDB_STATE_DEAD)) {
+					if (ddb_entry->fw_ddb_device_state ==
+					    DDB_DS_SESSION_ACTIVE) {
+						atomic_set(&ddb_entry->state,
+							   DDB_STATE_ONLINE);
+						dev_info(&ha->pdev->dev,
+						    "scsi%ld: %s: ddb[%d]"
+						    " os[%d] marked"
+						    " ONLINE\n",
+						    ha->host_no, __func__,
+						    ddb_entry->fw_ddb_index,
+						    ddb_entry->os_target_id);
+
+						iscsi_unblock_session(
+						    ddb_entry->sess);
+					} else
+						qla4xxx_relogin_device(
+						    ha, ddb_entry);
+				}
+
+			}
+		}
+	}
+
 	/* ---- relogin device? --- */
 	if (adapter_up(ha) &&
 	    test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) {
-- 
cgit v1.1


From c2393cd2dfdd435416cc097a70cc5f5e4f91a87e Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:39:31 +0530
Subject: [SCSI] qla4xxx: Code Clean up - remove "marker_needed"

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 347a7c8..1e56b8e 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -330,8 +330,7 @@ struct scsi_qla_host {
 #define MIN_IOBASE_LEN		0x100
 
 	uint16_t req_q_count;
-	uint8_t marker_needed;
-	uint8_t rsvd1;
+	uint8_t rsvd1[2];
 
 	unsigned long host_no;
 
-- 
cgit v1.1


From c301b0266c65c8781361ca152981cff4fac05498 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:40:37 +0530
Subject: [SCSI] qla4xxx: Updated firmware ready timeout algorithm

Updated firmware ready timeout algorithm to prevent
long delays and use jiffies to time out instead of
counter. Also use msleep_interruptible instead of msleep.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_init.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 7f6cc2e..beaeb18 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1046,7 +1046,7 @@ static void qla4x00_pci_config(struct scsi_qla_host *ha)
 static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 {
 	int status = QLA_ERROR;
-	uint32_t max_wait_time;
+	unsigned long max_wait_time;
 	unsigned long flags;
 	uint32_t mbox_status;
 
@@ -1078,7 +1078,10 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for firmware to come UP. */
-	max_wait_time = FIRMWARE_UP_TOV * 4;
+	DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "
+		      "boot firmware to complete...\n",
+		      ha->host_no, __func__, FIRMWARE_UP_TOV));
+	max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ);
 	do {
 		uint32_t ctrl_status;
 
@@ -1092,16 +1095,15 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 		if (mbox_status == MBOX_STS_COMMAND_COMPLETE)
 			break;
 
-		DEBUG2(printk("scsi%ld: %s: Waiting for boot firmware to "
-			      "complete... ctrl_sts=0x%x, remaining=%d\n",
-			      ha->host_no, __func__, ctrl_status,
-			      max_wait_time));
+		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
+			      "firmware to complete... ctrl_sts=0x%x\n",
+			      ha->host_no, __func__, ctrl_status));
 
-		msleep(250);
-	} while ((max_wait_time--));
+		msleep_interruptible(250);
+	} while (!time_after_eq(jiffies, max_wait_time));
 
 	if (mbox_status == MBOX_STS_COMMAND_COMPLETE) {
-		DEBUG(printk("scsi%ld: %s: Firmware has started\n",
+		DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n",
 			     ha->host_no, __func__));
 
 		spin_lock_irqsave(&ha->hardware_lock, flags);
-- 
cgit v1.1


From 821d6e5413481a57bbe1c2722dbe1fee4ff675c4 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:41:21 +0530
Subject: [SCSI] qla4xxx: do not retry login to CHAP auth failed targets

Per RFC 3720, Login Response Status Code 0x02 should not be retried.
Condensed connection error checking code to a single routine, and
added check for status class 0x02.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_glbl.h |   5 +-
 drivers/scsi/qla4xxx/ql4_init.c | 130 +++++++++++++++++++++++++++-------------
 drivers/scsi/qla4xxx/ql4_isr.c  |   2 +-
 3 files changed, 94 insertions(+), 43 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 96ebfb0..987658f 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -67,11 +67,12 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
 					uint32_t index);
 void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb);
 int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha);
-int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha,
-				uint32_t fw_ddb_index, uint32_t state);
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		uint32_t state, uint32_t conn_error);
 void qla4xxx_dump_buffer(void *b, uint32_t size);
 int qla4xxx_send_marker_iocb(struct scsi_qla_host *ha,
 	struct ddb_entry *ddb_entry, int lun, uint16_t mrkr_mod);
+int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdiscoverywait;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index beaeb18..5510df8 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -505,6 +505,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	struct dev_db_entry *fw_ddb_entry = NULL;
 	dma_addr_t fw_ddb_entry_dma;
 	int status = QLA_ERROR;
+	uint32_t conn_err;
 
 	if (ddb_entry == NULL) {
 		DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no,
@@ -525,7 +526,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 
 	if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
 				    fw_ddb_entry_dma, NULL, NULL,
-				    &ddb_entry->fw_ddb_device_state, NULL,
+				    &ddb_entry->fw_ddb_device_state, &conn_err,
 				    &ddb_entry->tcp_source_port_num,
 				    &ddb_entry->connection_id) ==
 	    QLA_ERROR) {
@@ -578,12 +579,26 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 			fw_ddb_entry->link_local_ipv6_addr,
 			min(sizeof(ddb_entry->link_local_ipv6_addr),
 			sizeof(fw_ddb_entry->link_local_ipv6_addr)));
-	}
-
-	DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n",
-			ha->host_no, __func__, fw_ddb_index,
-			ddb_entry->fw_ddb_device_state, status));
 
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d "
+					"State %04x ConnErr %08x IP %pI6 "
+					":%04d \"%s\"\n",
+					__func__, fw_ddb_index,
+					ddb_entry->os_target_id,
+					ddb_entry->fw_ddb_device_state,
+					conn_err, fw_ddb_entry->ip_addr,
+					le16_to_cpu(fw_ddb_entry->port),
+					fw_ddb_entry->iscsi_name));
+	} else
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d "
+					"State %04x ConnErr %08x IP %pI4 "
+					":%04d \"%s\"\n",
+					__func__, fw_ddb_index,
+					ddb_entry->os_target_id,
+					ddb_entry->fw_ddb_device_state,
+					conn_err, fw_ddb_entry->ip_addr,
+					le16_to_cpu(fw_ddb_entry->port),
+					fw_ddb_entry->iscsi_name));
 exit_update_ddb:
 	if (fw_ddb_entry)
 		dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
@@ -630,6 +645,40 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
 }
 
 /**
+ * qla4_is_relogin_allowed - Are we allowed to login?
+ * @ha: Pointer to host adapter structure.
+ * @conn_err: Last connection error associated with the ddb
+ *
+ * This routine tests the given connection error to determine if
+ * we are allowed to login.
+ **/
+int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err)
+{
+	uint32_t err_code, login_rsp_sts_class;
+	int relogin = 1;
+
+	err_code = ((conn_err & 0x00ff0000) >> 16);
+	login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8);
+	if (err_code == 0x1c || err_code == 0x06) {
+		DEBUG2(dev_info(&ha->pdev->dev,
+				": conn_err=0x%08x, send target completed"
+				" or access denied failure\n", conn_err));
+		relogin = 0;
+	}
+	if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) {
+		/* Login Response PDU returned an error.
+		   Login Response Status in Error Code Detail
+		   indicates login should not be retried.*/
+		DEBUG2(dev_info(&ha->pdev->dev,
+				": conn_err=0x%08x, do not retry relogin\n",
+				conn_err));
+		relogin = 0;
+	}
+
+	return relogin;
+}
+
+/**
  * qla4xxx_configure_ddbs - builds driver ddb list
  * @ha: Pointer to host adapter structure.
  *
@@ -643,18 +692,30 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
 	uint32_t fw_ddb_index = 0;
 	uint32_t next_fw_ddb_index = 0;
 	uint32_t ddb_state;
-	uint32_t conn_err, err_code;
+	uint32_t conn_err;
 	struct ddb_entry *ddb_entry;
+	struct dev_db_entry *fw_ddb_entry = NULL;
+	dma_addr_t fw_ddb_entry_dma;
+	uint32_t ipv6_device;
 	uint32_t new_tgt;
 
+	fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+			&fw_ddb_entry_dma, GFP_KERNEL);
+	if (fw_ddb_entry == NULL) {
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DMA alloc failed\n",
+				__func__));
+		return QLA_ERROR;
+	}
+
 	dev_info(&ha->pdev->dev, "Initializing DDBs ...\n");
 	for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES;
 	     fw_ddb_index = next_fw_ddb_index) {
 		/* First, let's see if a device exists here */
-		if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, NULL, 0, NULL,
-					    &next_fw_ddb_index, &ddb_state,
-					    &conn_err, NULL, NULL) ==
-		    QLA_ERROR) {
+		if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
+					    0, NULL, &next_fw_ddb_index,
+					    &ddb_state, &conn_err,
+					    NULL, NULL) ==
+					    QLA_ERROR) {
 			DEBUG2(printk("scsi%ld: %s: get_ddb_entry, "
 				      "fw_ddb_index %d failed", ha->host_no,
 				      __func__, fw_ddb_index));
@@ -671,18 +732,19 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
 			/* Try and login to device */
 			DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n",
 				      ha->host_no, __func__, fw_ddb_index));
-			err_code = ((conn_err & 0x00ff0000) >> 16);
-			if (err_code == 0x1c || err_code == 0x06) {
-				DEBUG2(printk("scsi%ld: %s send target "
-					      "completed "
-					      "or access denied failure\n",
-					      ha->host_no, __func__));
-			} else {
+			ipv6_device = le16_to_cpu(fw_ddb_entry->options) &
+					DDB_OPT_IPV6_DEVICE;
+			if (qla4_is_relogin_allowed(ha, conn_err) &&
+					((!ipv6_device &&
+					  *((uint32_t *)fw_ddb_entry->ip_addr))
+					 || ipv6_device)) {
 				qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0);
 				if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index,
-					NULL, 0, NULL, &next_fw_ddb_index,
-					&ddb_state, &conn_err, NULL, NULL)
-					== QLA_ERROR) {
+							NULL, 0, NULL,
+							&next_fw_ddb_index,
+							&ddb_state, &conn_err,
+							NULL, NULL)
+						== QLA_ERROR) {
 					DEBUG2(printk("scsi%ld: %s:"
 						"get_ddb_entry %d failed\n",
 						ha->host_no,
@@ -737,7 +799,6 @@ next_one:
 struct qla4_relog_scan {
 	int halt_wait;
 	uint32_t conn_err;
-	uint32_t err_code;
 	uint32_t fw_ddb_index;
 	uint32_t next_fw_ddb_index;
 	uint32_t fw_ddb_device_state;
@@ -747,18 +808,7 @@ static int qla4_test_rdy(struct scsi_qla_host *ha, struct qla4_relog_scan *rs)
 {
 	struct ddb_entry *ddb_entry;
 
-	/*
-	 * Don't want to do a relogin if connection
-	 * error is 0x1c.
-	 */
-	rs->err_code = ((rs->conn_err & 0x00ff0000) >> 16);
-	if (rs->err_code == 0x1c || rs->err_code == 0x06) {
-		DEBUG2(printk(
-			       "scsi%ld: %s send target"
-			       " completed or "
-			       "access denied failure\n",
-			       ha->host_no, __func__));
-	} else {
+	if (qla4_is_relogin_allowed(ha, rs->conn_err)) {
 		/* We either have a device that is in
 		 * the process of relogging in or a
 		 * device that is waiting to be
@@ -1411,8 +1461,8 @@ static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha,
  *
  * This routine processes a Decive Database Changed AEN Event.
  **/
-int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
-				uint32_t fw_ddb_index, uint32_t state)
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		uint32_t state, uint32_t conn_err)
 {
 	struct ddb_entry * ddb_entry;
 	uint32_t old_fw_ddb_device_state;
@@ -1470,13 +1520,13 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
 
 		/*
 		 * Relogin if device state changed to a not active state.
-		 * However, do not relogin if this aen is a result of an IOCTL
-		 * logout (DF_NO_RELOGIN) or if this is a discovered device.
+		 * However, do not relogin if a RELOGIN is in process, or
+		 * we are not allowed to relogin to this DDB.
 		 */
 		if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED &&
 		    !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
 		    !test_bit(DF_NO_RELOGIN, &ddb_entry->flags) &&
-		    !test_bit(DF_ISNS_DISCOVERED, &ddb_entry->flags)) {
+		    qla4_is_relogin_allowed(ha, conn_err)) {
 			/*
 			 * This triggers a relogin.  After the relogin_timer
 			 * expires, the relogin gets scheduled.	 We must wait a
@@ -1484,7 +1534,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
 			 * with failed device_state or a logout response before
 			 * we can issue another relogin.
 			 */
-			/* Firmware padds this timeout: (time2wait +1).
+			/* Firmware pads this timeout: (time2wait +1).
 			 * Driver retry to login should be longer than F/W.
 			 * Otherwise F/W will fail
 			 * set_ddb() mbx cmd with 0x4005 since it still
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 9db286d..ce5838e 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -838,7 +838,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen)
 				qla4xxx_reinitialize_ddb_list(ha);
 			} else if (mbox_sts[1] == 1) {	/* Specific device. */
 				qla4xxx_process_ddb_changed(ha, mbox_sts[2],
-							    mbox_sts[3]);
+						mbox_sts[3], mbox_sts[4]);
 			}
 			break;
 		}
-- 
cgit v1.1


From 5369887a95da9509163931b21f61a94da09dac15 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:41:59 +0530
Subject: [SCSI] qla4xxx: correct use of cmd->host_scribble

used cmd->host_scribble to store iocb command handle.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  2 ++
 drivers/scsi/qla4xxx/ql4_iocb.c |  2 +-
 drivers/scsi/qla4xxx/ql4_os.c   | 18 ++++++++++--------
 3 files changed, 13 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 1e56b8e..b6f2d01 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -148,6 +148,8 @@
 
 #define MAX_RESET_HA_RETRIES		2
 
+#define CMD_SP(Cmnd)			((Cmnd)->SCp.ptr)
+
 /*
  * SCSI Request Block structure	 (srb)	that is placed
  * on cmd->SCp location of every I/O	 [We have 22 bytes available]
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index e0c3215..e66f3f2 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -299,7 +299,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb)
 	qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
 	wmb();
 
-	srb->cmd->host_scribble = (unsigned char *)srb;
+	srb->cmd->host_scribble = (unsigned char *)(unsigned long)index;
 
 	/* update counters */
 	srb->state = SRB_ACTIVE_STATE;
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d6c8b42..2ca43f0 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -389,7 +389,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
 	srb->ddb = ddb_entry;
 	srb->cmd = cmd;
 	srb->flags = 0;
-	cmd->SCp.ptr = (void *)srb;
+	CMD_SP(cmd) = (void *)srb;
 	cmd->scsi_done = done;
 
 	return srb;
@@ -403,7 +403,7 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
 		scsi_dma_unmap(cmd);
 		srb->flags &= ~SRB_DMA_VALID;
 	}
-	cmd->SCp.ptr = NULL;
+	CMD_SP(cmd) = NULL;
 }
 
 void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb)
@@ -891,7 +891,6 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha)
 		}
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
 }
 
 /**
@@ -1479,12 +1478,14 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev)
 struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index)
 {
 	struct srb *srb = NULL;
-	struct scsi_cmnd *cmd;
+	struct scsi_cmnd *cmd = NULL;
 
-	if (!(cmd = scsi_host_find_tag(ha->host, index)))
+	cmd = scsi_host_find_tag(ha->host, index);
+	if (!cmd)
 		return srb;
 
-	if (!(srb = (struct srb *)cmd->host_scribble))
+	srb = (struct srb *)CMD_SP(cmd);
+	if (!srb)
 		return srb;
 
 	/* update counters */
@@ -1492,7 +1493,8 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in
 		ha->req_q_count += srb->iocb_cnt;
 		ha->iocb_cnt -= srb->iocb_cnt;
 		if (srb->cmd)
-			srb->cmd->host_scribble = NULL;
+			srb->cmd->host_scribble =
+				(unsigned char *)(unsigned long) MAX_SRBS;
 	}
 	return srb;
 }
@@ -1514,7 +1516,7 @@ static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha,
 
 	do {
 		/* Checking to see if its returned to OS */
-		rp = (struct srb *) cmd->SCp.ptr;
+		rp = (struct srb *) CMD_SP(cmd);
 		if (rp == NULL) {
 			done++;
 			break;
-- 
cgit v1.1


From 09a0f719896659a6c32df11426e55795012c06ff Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:42:24 +0530
Subject: [SCSI] qla4xxx: added support for abort task management command

* Handles SCSI command aborts.
* Serialization srb between error handler and command
  completion path.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  2 +-
 drivers/scsi/qla4xxx/ql4_fw.h   |  1 +
 drivers/scsi/qla4xxx/ql4_glbl.h |  3 +-
 drivers/scsi/qla4xxx/ql4_isr.c  |  6 ++--
 drivers/scsi/qla4xxx/ql4_mbx.c  | 53 ++++++++++++++++++++++++++++++++
 drivers/scsi/qla4xxx/ql4_os.c   | 68 ++++++++++++++++++++++++++++++++++++++---
 6 files changed, 124 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index b6f2d01..4288026 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -172,7 +172,7 @@ struct srb {
 
 	struct scsi_cmnd *cmd;	/* (4) SCSI command block */
 	dma_addr_t dma_handle;	/* (4) for unmap of single transfers */
-	atomic_t ref_count;	/* reference count for this srb */
+	struct kref srb_ref;	/* reference count for this srb */
 	uint32_t fw_ddb_index;
 	uint8_t err_id;		/* error id */
 #define SRB_ERR_PORT	   1	/* Request failed because "port down" */
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index dfe7b4d..855226e 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -215,6 +215,7 @@ union external_hw_config_reg {
 /*  Mailbox command definitions */
 #define MBOX_CMD_ABOUT_FW			0x0009
 #define MBOX_CMD_PING				0x000B
+#define MBOX_CMD_ABORT_TASK			0x0015
 #define MBOX_CMD_LUN_RESET			0x0016
 #define MBOX_CMD_TARGET_WARM_RESET		0x0017
 #define MBOX_CMD_GET_MANAGEMENT_DATA		0x001E
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 987658f..c4636f6 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -25,6 +25,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen);
 int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha);
 int qla4xxx_relogin_device(struct scsi_qla_host * ha,
 			   struct ddb_entry * ddb_entry);
+int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb);
 int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
 		      int lun);
 int qla4xxx_reset_target(struct scsi_qla_host * ha,
@@ -65,7 +66,7 @@ void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha,
 int qla4xxx_init_rings(struct scsi_qla_host * ha);
 struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha,
 					uint32_t index);
-void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb);
+void qla4xxx_srb_compl(struct kref *ref);
 int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha);
 int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 		uint32_t state, uint32_t conn_error);
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index ce5838e..596c303 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -97,7 +97,7 @@ qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
 
 	/* Place command on done queue. */
 	if (srb->req_sense_len == 0) {
-		qla4xxx_srb_compl(ha, srb);
+		kref_put(&srb->srb_ref, qla4xxx_srb_compl);
 		ha->status_srb = NULL;
 	}
 }
@@ -329,7 +329,7 @@ status_entry_exit:
 	/* complete the request, if not waiting for status_continuation pkt */
 	srb->cc_stat = sts_entry->completionStatus;
 	if (ha->status_srb == NULL)
-		qla4xxx_srb_compl(ha, srb);
+		kref_put(&srb->srb_ref, qla4xxx_srb_compl);
 }
 
 /**
@@ -393,7 +393,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha)
 			/* ETRY normally by sending it back with
 			 * DID_BUS_BUSY */
 			srb->cmd->result = DID_BUS_BUSY << 16;
-			qla4xxx_srb_compl(ha, srb);
+			kref_put(&srb->srb_ref, qla4xxx_srb_compl);
 			break;
 
 		case ET_CONTINUE:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 43581ce..e1315cd 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -762,6 +762,59 @@ exit_get_event_log:
 }
 
 /**
+ * qla4xxx_abort_task - issues Abort Task
+ * @ha: Pointer to host adapter structure.
+ * @srb: Pointer to srb entry
+ *
+ * This routine performs a LUN RESET on the specified target/lun.
+ * The caller must ensure that the ddb_entry and lun_entry pointers
+ * are valid before calling this routine.
+ **/
+int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	struct scsi_cmnd *cmd = srb->cmd;
+	int status = QLA_SUCCESS;
+	unsigned long flags = 0;
+	uint32_t index;
+
+	/*
+	 * Send abort task command to ISP, so that the ISP will return
+	 * request with ABORT status
+	 */
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	index = (unsigned long)(unsigned char *)cmd->host_scribble;
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Firmware already posted completion on response queue */
+	if (index == MAX_SRBS)
+		return status;
+
+	mbox_cmd[0] = MBOX_CMD_ABORT_TASK;
+	mbox_cmd[1] = srb->fw_ddb_index;
+	mbox_cmd[2] = index;
+	/* Immediate Command Enable */
+	mbox_cmd[5] = 0x01;
+
+	qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0],
+	    &mbox_sts[0]);
+	if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) {
+		status = QLA_ERROR;
+
+		DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%d: abort task FAILED: "
+		    "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n",
+		    ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0],
+		    mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4]));
+	}
+
+	return status;
+}
+
+/**
  * qla4xxx_reset_lun - issues LUN Reset
  * @ha: Pointer to host adapter structure.
  * @db_entry: Pointer to device database entry
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 2ca43f0..38b1d38 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -74,6 +74,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
  */
 static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
 				void (*done) (struct scsi_cmnd *));
+static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
@@ -88,6 +89,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
 	.proc_name		= DRIVER_NAME,
 	.queuecommand		= qla4xxx_queuecommand,
 
+	.eh_abort_handler	= qla4xxx_eh_abort,
 	.eh_device_reset_handler = qla4xxx_eh_device_reset,
 	.eh_target_reset_handler = qla4xxx_eh_target_reset,
 	.eh_host_reset_handler	= qla4xxx_eh_host_reset,
@@ -384,7 +386,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha,
 	if (!srb)
 		return srb;
 
-	atomic_set(&srb->ref_count, 1);
+	kref_init(&srb->srb_ref);
 	srb->ha = ha;
 	srb->ddb = ddb_entry;
 	srb->cmd = cmd;
@@ -406,9 +408,11 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb)
 	CMD_SP(cmd) = NULL;
 }
 
-void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb)
+void qla4xxx_srb_compl(struct kref *ref)
 {
+	struct srb *srb = container_of(ref, struct srb, srb_ref);
 	struct scsi_cmnd *cmd = srb->cmd;
+	struct scsi_qla_host *ha = srb->ha;
 
 	qla4xxx_srb_free_dma(ha, srb);
 
@@ -887,7 +891,7 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha)
 		srb = qla4xxx_del_from_active_array(ha, i);
 		if (srb != NULL) {
 			srb->cmd->result = DID_RESET << 16;
-			qla4xxx_srb_compl(ha, srb);
+			kref_put(&srb->srb_ref, qla4xxx_srb_compl);
 		}
 	}
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -1501,7 +1505,7 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in
 
 /**
  * qla4xxx_eh_wait_on_command - waits for command to be returned by firmware
- * @ha: actual ha whose done queue will contain the comd returned by firmware.
+ * @ha: Pointer to host adapter structure.
  * @cmd: Scsi Command to wait on.
  *
  * This routine waits for the command to be returned by the Firmware
@@ -1585,6 +1589,62 @@ static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha,
 }
 
 /**
+ * qla4xxx_eh_abort - callback for abort task.
+ * @cmd: Pointer to Linux's SCSI command structure
+ *
+ * This routine is called by the Linux OS to abort the specified
+ * command.
+ **/
+static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
+{
+	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
+	unsigned int id = cmd->device->id;
+	unsigned int lun = cmd->device->lun;
+	unsigned long serial = cmd->serial_number;
+	struct srb *srb = NULL;
+	int ret = SUCCESS;
+	int wait = 0;
+
+	dev_info(&ha->pdev->dev,
+	    "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n",
+	    ha->host_no, id, lun, cmd, serial);
+
+	srb = (struct srb *) CMD_SP(cmd);
+
+	if (!srb)
+		return SUCCESS;
+
+	kref_get(&srb->srb_ref);
+
+	if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) {
+		DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n",
+		    ha->host_no, id, lun));
+		ret = FAILED;
+	} else {
+		DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n",
+		    ha->host_no, id, lun));
+		wait = 1;
+	}
+
+	kref_put(&srb->srb_ref, qla4xxx_srb_compl);
+
+	/* Wait for command to complete */
+	if (wait) {
+		if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
+			DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n",
+			    ha->host_no, id, lun));
+			ret = FAILED;
+		}
+	}
+
+	dev_info(&ha->pdev->dev,
+	    "scsi%ld:%d:%d: Abort command - %s\n",
+	    ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed");
+
+	return ret;
+}
+
+/**
  * qla4xxx_eh_device_reset - callback for target reset.
  * @cmd: Pointer to Linux's SCSI command structure
  *
-- 
cgit v1.1


From 1a6633da200909e9c71ba7a0c40eebe56746c3f5 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Wed, 28 Apr 2010 11:45:06 +0530
Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k1

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_version.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/scsi/qla4xxx')

diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index 6980cb2..28a6c49 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,5 +5,4 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.01.00-k9"
-
+#define QLA4XXX_DRIVER_VERSION	"5.02.00-k1"
-- 
cgit v1.1