From 13f7e5acc8b329080672c13f05f252ace5b79825 Mon Sep 17 00:00:00 2001 From: Kurt Garloff Date: Mon, 3 Apr 2006 15:20:08 +0200 Subject: [SCSI] BLIST_ATTACH_PQ3 flags Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 3/3: 3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi scanning code register PQ3 devices and continues scanning; only sg will attach thanks to scsi_bus_match(). Signed-off-by: Kurt Garloff Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi/scsi_scan.c') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 5603dc6..7d31a4b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -900,7 +900,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, /* * result contains valid SCSI INQUIRY data. */ - if ((result[0] >> 5) == 3) { + if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) { /* * For a Peripheral qualifier 3 (011b), the SCSI * spec says: The device server is not capable of -- cgit v1.1