From e6b6239f8e8e5bd9ba0192a854652abf14e28ce4 Mon Sep 17 00:00:00 2001 From: Andrei Konovalov Date: Tue, 5 Jul 2005 18:54:43 -0700 Subject: [PATCH] ppc32: add Freescale MPC885ADS board support This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman Signed-off-by: Andrei Konovalov Acked-by: Tom Rini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'drivers/serial/cpm_uart') diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index de26cf7..7911912 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -94,12 +94,42 @@ void smc1_lineif(struct uart_cpm_port *pinfo) ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; } +#ifdef CONFIG_MPC885ADS + /* Enable SMC1 transceivers */ + { + volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4); + uint tmp; + + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_1; + out_be32(bcsr1, tmp); + iounmap(bcsr1); + } +#endif + pinfo->brg = 1; } void smc2_lineif(struct uart_cpm_port *pinfo) { - /* XXX SMC2: insert port configuration here */ +#ifdef CONFIG_MPC885ADS + volatile cpm8xx_t *cp = cpmp; + volatile uint __iomem *bcsr1; + uint tmp; + + cp->cp_pepar |= 0x00000c00; + cp->cp_pedir &= ~0x00000c00; + cp->cp_peso &= ~0x00000400; + cp->cp_peso |= 0x00000800; + + /* Enable SMC2 transceivers */ + bcsr1 = ioremap(BCSR1, 4); + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_2; + out_be32(bcsr1, tmp); + iounmap(bcsr1); +#endif + pinfo->brg = 2; } -- cgit v1.1