From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/Makefile | 3 +- drivers/char/Kconfig | 2 +- drivers/serial/21285.c | 513 --- drivers/serial/68328serial.c | 1472 --------- drivers/serial/68328serial.h | 188 -- drivers/serial/68360serial.c | 2978 ----------------- drivers/serial/8250.c | 3377 -------------------- drivers/serial/8250.h | 80 - drivers/serial/8250_accent.c | 47 - drivers/serial/8250_acorn.c | 141 - drivers/serial/8250_boca.c | 61 - drivers/serial/8250_early.c | 287 -- drivers/serial/8250_exar_st16c554.c | 52 - drivers/serial/8250_fourport.c | 53 - drivers/serial/8250_gsc.c | 122 - drivers/serial/8250_hp300.c | 327 -- drivers/serial/8250_hub6.c | 58 - drivers/serial/8250_mca.c | 63 - drivers/serial/8250_pci.c | 3850 ---------------------- drivers/serial/8250_pnp.c | 523 --- drivers/serial/Kconfig | 1598 ---------- drivers/serial/Makefile | 94 - drivers/serial/altera_jtaguart.c | 504 --- drivers/serial/altera_uart.c | 608 ---- drivers/serial/amba-pl010.c | 825 ----- drivers/serial/amba-pl011.c | 1519 --------- drivers/serial/apbuart.c | 709 ----- drivers/serial/apbuart.h | 64 - drivers/serial/atmel_serial.c | 1808 ----------- drivers/serial/bcm63xx_uart.c | 891 ------ drivers/serial/bfin_5xx.c | 1600 ---------- drivers/serial/bfin_sport_uart.c | 935 ------ drivers/serial/bfin_sport_uart.h | 86 - drivers/serial/clps711x.c | 579 ---- drivers/serial/cpm_uart/Makefile | 11 - drivers/serial/cpm_uart/cpm_uart.h | 147 - drivers/serial/cpm_uart/cpm_uart_core.c | 1443 --------- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 138 - drivers/serial/cpm_uart/cpm_uart_cpm1.h | 34 - drivers/serial/cpm_uart/cpm_uart_cpm2.c | 174 - drivers/serial/cpm_uart/cpm_uart_cpm2.h | 34 - drivers/serial/crisv10.c | 4573 --------------------------- drivers/serial/crisv10.h | 147 - drivers/serial/dz.c | 955 ------ drivers/serial/dz.h | 129 - drivers/serial/icom.c | 1658 ---------- drivers/serial/icom.h | 287 -- drivers/serial/ifx6x60.c | 1406 -------- drivers/serial/ifx6x60.h | 129 - drivers/serial/imx.c | 1380 -------- drivers/serial/ioc3_serial.c | 2199 ------------- drivers/serial/ioc4_serial.c | 2953 ----------------- drivers/serial/ip22zilog.c | 1221 ------- drivers/serial/ip22zilog.h | 281 -- drivers/serial/jsm/Makefile | 8 - drivers/serial/jsm/jsm.h | 388 --- drivers/serial/jsm/jsm_driver.c | 297 -- drivers/serial/jsm/jsm_neo.c | 1412 --------- drivers/serial/jsm/jsm_tty.c | 910 ------ drivers/serial/kgdboc.c | 328 -- drivers/serial/m32r_sio.c | 1192 ------- drivers/serial/m32r_sio.h | 48 - drivers/serial/m32r_sio_reg.h | 152 - drivers/serial/max3100.c | 926 ------ drivers/serial/max3107-aava.c | 344 -- drivers/serial/max3107.c | 1213 ------- drivers/serial/max3107.h | 441 --- drivers/serial/mcf.c | 662 ---- drivers/serial/mfd.c | 1513 --------- drivers/serial/mpc52xx_uart.c | 1527 --------- drivers/serial/mpsc.c | 2159 ------------- drivers/serial/mrst_max3110.c | 919 ------ drivers/serial/mrst_max3110.h | 60 - drivers/serial/msm_serial.c | 758 ----- drivers/serial/msm_serial.h | 173 - drivers/serial/mux.c | 633 ---- drivers/serial/netx-serial.c | 750 ----- drivers/serial/nwpserial.c | 477 --- drivers/serial/of_serial.c | 201 -- drivers/serial/omap-serial.c | 1359 -------- drivers/serial/pch_uart.c | 1451 --------- drivers/serial/pmac_zilog.c | 2208 ------------- drivers/serial/pmac_zilog.h | 396 --- drivers/serial/pnx8xxx_uart.c | 854 ----- drivers/serial/pxa.c | 879 ----- drivers/serial/s3c2400.c | 106 - drivers/serial/s3c2410.c | 118 - drivers/serial/s3c2412.c | 152 - drivers/serial/s3c2440.c | 181 -- drivers/serial/s3c24a0.c | 118 - drivers/serial/s3c6400.c | 152 - drivers/serial/s5pv210.c | 162 - drivers/serial/sa1100.c | 918 ------ drivers/serial/samsung.c | 1487 --------- drivers/serial/samsung.h | 120 - drivers/serial/sb1250-duart.c | 976 ------ drivers/serial/sc26xx.c | 757 ----- drivers/serial/serial_core.c | 2578 --------------- drivers/serial/serial_cs.c | 869 ----- drivers/serial/serial_ks8695.c | 705 ----- drivers/serial/serial_lh7a40x.c | 682 ---- drivers/serial/serial_txx9.c | 1344 -------- drivers/serial/sh-sci.c | 2027 ------------ drivers/serial/sh-sci.h | 660 ---- drivers/serial/sn_console.c | 1085 ------- drivers/serial/suncore.c | 247 -- drivers/serial/suncore.h | 33 - drivers/serial/sunhv.c | 661 ---- drivers/serial/sunsab.c | 1152 ------- drivers/serial/sunsab.h | 322 -- drivers/serial/sunsu.c | 1608 ---------- drivers/serial/sunzilog.c | 1655 ---------- drivers/serial/sunzilog.h | 289 -- drivers/serial/timbuart.c | 531 ---- drivers/serial/timbuart.h | 58 - drivers/serial/uartlite.c | 709 ----- drivers/serial/ucc_uart.c | 1537 --------- drivers/serial/vr41xx_siu.c | 978 ------ drivers/serial/vt8500_serial.c | 648 ---- drivers/serial/zs.c | 1304 -------- drivers/serial/zs.h | 284 -- drivers/tty/Makefile | 1 + drivers/tty/serial/21285.c | 513 +++ drivers/tty/serial/68328serial.c | 1472 +++++++++ drivers/tty/serial/68328serial.h | 188 ++ drivers/tty/serial/68360serial.c | 2978 +++++++++++++++++ drivers/tty/serial/8250.c | 3377 ++++++++++++++++++++ drivers/tty/serial/8250.h | 80 + drivers/tty/serial/8250_accent.c | 47 + drivers/tty/serial/8250_acorn.c | 141 + drivers/tty/serial/8250_boca.c | 61 + drivers/tty/serial/8250_early.c | 287 ++ drivers/tty/serial/8250_exar_st16c554.c | 52 + drivers/tty/serial/8250_fourport.c | 53 + drivers/tty/serial/8250_gsc.c | 122 + drivers/tty/serial/8250_hp300.c | 327 ++ drivers/tty/serial/8250_hub6.c | 58 + drivers/tty/serial/8250_mca.c | 63 + drivers/tty/serial/8250_pci.c | 3850 ++++++++++++++++++++++ drivers/tty/serial/8250_pnp.c | 523 +++ drivers/tty/serial/Kconfig | 1598 ++++++++++ drivers/tty/serial/Makefile | 94 + drivers/tty/serial/altera_jtaguart.c | 504 +++ drivers/tty/serial/altera_uart.c | 608 ++++ drivers/tty/serial/amba-pl010.c | 825 +++++ drivers/tty/serial/amba-pl011.c | 1519 +++++++++ drivers/tty/serial/apbuart.c | 709 +++++ drivers/tty/serial/apbuart.h | 64 + drivers/tty/serial/atmel_serial.c | 1808 +++++++++++ drivers/tty/serial/bcm63xx_uart.c | 891 ++++++ drivers/tty/serial/bfin_5xx.c | 1600 ++++++++++ drivers/tty/serial/bfin_sport_uart.c | 935 ++++++ drivers/tty/serial/bfin_sport_uart.h | 86 + drivers/tty/serial/clps711x.c | 579 ++++ drivers/tty/serial/cpm_uart/Makefile | 11 + drivers/tty/serial/cpm_uart/cpm_uart.h | 147 + drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1443 +++++++++ drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 138 + drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 34 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 174 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 34 + drivers/tty/serial/crisv10.c | 4573 +++++++++++++++++++++++++++ drivers/tty/serial/crisv10.h | 147 + drivers/tty/serial/dz.c | 955 ++++++ drivers/tty/serial/dz.h | 129 + drivers/tty/serial/icom.c | 1658 ++++++++++ drivers/tty/serial/icom.h | 287 ++ drivers/tty/serial/ifx6x60.c | 1406 ++++++++ drivers/tty/serial/ifx6x60.h | 129 + drivers/tty/serial/imx.c | 1380 ++++++++ drivers/tty/serial/ioc3_serial.c | 2199 +++++++++++++ drivers/tty/serial/ioc4_serial.c | 2953 +++++++++++++++++ drivers/tty/serial/ip22zilog.c | 1221 +++++++ drivers/tty/serial/ip22zilog.h | 281 ++ drivers/tty/serial/jsm/Makefile | 8 + drivers/tty/serial/jsm/jsm.h | 388 +++ drivers/tty/serial/jsm/jsm_driver.c | 297 ++ drivers/tty/serial/jsm/jsm_neo.c | 1412 +++++++++ drivers/tty/serial/jsm/jsm_tty.c | 910 ++++++ drivers/tty/serial/kgdboc.c | 328 ++ drivers/tty/serial/m32r_sio.c | 1192 +++++++ drivers/tty/serial/m32r_sio.h | 48 + drivers/tty/serial/m32r_sio_reg.h | 152 + drivers/tty/serial/max3100.c | 926 ++++++ drivers/tty/serial/max3107-aava.c | 344 ++ drivers/tty/serial/max3107.c | 1213 +++++++ drivers/tty/serial/max3107.h | 441 +++ drivers/tty/serial/mcf.c | 662 ++++ drivers/tty/serial/mfd.c | 1513 +++++++++ drivers/tty/serial/mpc52xx_uart.c | 1527 +++++++++ drivers/tty/serial/mpsc.c | 2159 +++++++++++++ drivers/tty/serial/mrst_max3110.c | 919 ++++++ drivers/tty/serial/mrst_max3110.h | 60 + drivers/tty/serial/msm_serial.c | 758 +++++ drivers/tty/serial/msm_serial.h | 173 + drivers/tty/serial/mux.c | 633 ++++ drivers/tty/serial/netx-serial.c | 750 +++++ drivers/tty/serial/nwpserial.c | 477 +++ drivers/tty/serial/of_serial.c | 201 ++ drivers/tty/serial/omap-serial.c | 1359 ++++++++ drivers/tty/serial/pch_uart.c | 1451 +++++++++ drivers/tty/serial/pmac_zilog.c | 2208 +++++++++++++ drivers/tty/serial/pmac_zilog.h | 396 +++ drivers/tty/serial/pnx8xxx_uart.c | 854 +++++ drivers/tty/serial/pxa.c | 879 +++++ drivers/tty/serial/s3c2400.c | 106 + drivers/tty/serial/s3c2410.c | 118 + drivers/tty/serial/s3c2412.c | 152 + drivers/tty/serial/s3c2440.c | 181 ++ drivers/tty/serial/s3c24a0.c | 118 + drivers/tty/serial/s3c6400.c | 152 + drivers/tty/serial/s5pv210.c | 162 + drivers/tty/serial/sa1100.c | 918 ++++++ drivers/tty/serial/samsung.c | 1487 +++++++++ drivers/tty/serial/samsung.h | 120 + drivers/tty/serial/sb1250-duart.c | 976 ++++++ drivers/tty/serial/sc26xx.c | 757 +++++ drivers/tty/serial/serial_core.c | 2578 +++++++++++++++ drivers/tty/serial/serial_cs.c | 869 +++++ drivers/tty/serial/serial_ks8695.c | 705 +++++ drivers/tty/serial/serial_lh7a40x.c | 682 ++++ drivers/tty/serial/serial_txx9.c | 1344 ++++++++ drivers/tty/serial/sh-sci.c | 2027 ++++++++++++ drivers/tty/serial/sh-sci.h | 660 ++++ drivers/tty/serial/sn_console.c | 1085 +++++++ drivers/tty/serial/suncore.c | 247 ++ drivers/tty/serial/suncore.h | 33 + drivers/tty/serial/sunhv.c | 661 ++++ drivers/tty/serial/sunsab.c | 1152 +++++++ drivers/tty/serial/sunsab.h | 322 ++ drivers/tty/serial/sunsu.c | 1608 ++++++++++ drivers/tty/serial/sunzilog.c | 1655 ++++++++++ drivers/tty/serial/sunzilog.h | 289 ++ drivers/tty/serial/timbuart.c | 531 ++++ drivers/tty/serial/timbuart.h | 58 + drivers/tty/serial/uartlite.c | 709 +++++ drivers/tty/serial/ucc_uart.c | 1537 +++++++++ drivers/tty/serial/vr41xx_siu.c | 978 ++++++ drivers/tty/serial/vt8500_serial.c | 648 ++++ drivers/tty/serial/zs.c | 1304 ++++++++ drivers/tty/serial/zs.h | 284 ++ 241 files changed, 97165 insertions(+), 97165 deletions(-) delete mode 100644 drivers/serial/21285.c delete mode 100644 drivers/serial/68328serial.c delete mode 100644 drivers/serial/68328serial.h delete mode 100644 drivers/serial/68360serial.c delete mode 100644 drivers/serial/8250.c delete mode 100644 drivers/serial/8250.h delete mode 100644 drivers/serial/8250_accent.c delete mode 100644 drivers/serial/8250_acorn.c delete mode 100644 drivers/serial/8250_boca.c delete mode 100644 drivers/serial/8250_early.c delete mode 100644 drivers/serial/8250_exar_st16c554.c delete mode 100644 drivers/serial/8250_fourport.c delete mode 100644 drivers/serial/8250_gsc.c delete mode 100644 drivers/serial/8250_hp300.c delete mode 100644 drivers/serial/8250_hub6.c delete mode 100644 drivers/serial/8250_mca.c delete mode 100644 drivers/serial/8250_pci.c delete mode 100644 drivers/serial/8250_pnp.c delete mode 100644 drivers/serial/Kconfig delete mode 100644 drivers/serial/Makefile delete mode 100644 drivers/serial/altera_jtaguart.c delete mode 100644 drivers/serial/altera_uart.c delete mode 100644 drivers/serial/amba-pl010.c delete mode 100644 drivers/serial/amba-pl011.c delete mode 100644 drivers/serial/apbuart.c delete mode 100644 drivers/serial/apbuart.h delete mode 100644 drivers/serial/atmel_serial.c delete mode 100644 drivers/serial/bcm63xx_uart.c delete mode 100644 drivers/serial/bfin_5xx.c delete mode 100644 drivers/serial/bfin_sport_uart.c delete mode 100644 drivers/serial/bfin_sport_uart.h delete mode 100644 drivers/serial/clps711x.c delete mode 100644 drivers/serial/cpm_uart/Makefile delete mode 100644 drivers/serial/cpm_uart/cpm_uart.h delete mode 100644 drivers/serial/cpm_uart/cpm_uart_core.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.h delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.h delete mode 100644 drivers/serial/crisv10.c delete mode 100644 drivers/serial/crisv10.h delete mode 100644 drivers/serial/dz.c delete mode 100644 drivers/serial/dz.h delete mode 100644 drivers/serial/icom.c delete mode 100644 drivers/serial/icom.h delete mode 100644 drivers/serial/ifx6x60.c delete mode 100644 drivers/serial/ifx6x60.h delete mode 100644 drivers/serial/imx.c delete mode 100644 drivers/serial/ioc3_serial.c delete mode 100644 drivers/serial/ioc4_serial.c delete mode 100644 drivers/serial/ip22zilog.c delete mode 100644 drivers/serial/ip22zilog.h delete mode 100644 drivers/serial/jsm/Makefile delete mode 100644 drivers/serial/jsm/jsm.h delete mode 100644 drivers/serial/jsm/jsm_driver.c delete mode 100644 drivers/serial/jsm/jsm_neo.c delete mode 100644 drivers/serial/jsm/jsm_tty.c delete mode 100644 drivers/serial/kgdboc.c delete mode 100644 drivers/serial/m32r_sio.c delete mode 100644 drivers/serial/m32r_sio.h delete mode 100644 drivers/serial/m32r_sio_reg.h delete mode 100644 drivers/serial/max3100.c delete mode 100644 drivers/serial/max3107-aava.c delete mode 100644 drivers/serial/max3107.c delete mode 100644 drivers/serial/max3107.h delete mode 100644 drivers/serial/mcf.c delete mode 100644 drivers/serial/mfd.c delete mode 100644 drivers/serial/mpc52xx_uart.c delete mode 100644 drivers/serial/mpsc.c delete mode 100644 drivers/serial/mrst_max3110.c delete mode 100644 drivers/serial/mrst_max3110.h delete mode 100644 drivers/serial/msm_serial.c delete mode 100644 drivers/serial/msm_serial.h delete mode 100644 drivers/serial/mux.c delete mode 100644 drivers/serial/netx-serial.c delete mode 100644 drivers/serial/nwpserial.c delete mode 100644 drivers/serial/of_serial.c delete mode 100644 drivers/serial/omap-serial.c delete mode 100644 drivers/serial/pch_uart.c delete mode 100644 drivers/serial/pmac_zilog.c delete mode 100644 drivers/serial/pmac_zilog.h delete mode 100644 drivers/serial/pnx8xxx_uart.c delete mode 100644 drivers/serial/pxa.c delete mode 100644 drivers/serial/s3c2400.c delete mode 100644 drivers/serial/s3c2410.c delete mode 100644 drivers/serial/s3c2412.c delete mode 100644 drivers/serial/s3c2440.c delete mode 100644 drivers/serial/s3c24a0.c delete mode 100644 drivers/serial/s3c6400.c delete mode 100644 drivers/serial/s5pv210.c delete mode 100644 drivers/serial/sa1100.c delete mode 100644 drivers/serial/samsung.c delete mode 100644 drivers/serial/samsung.h delete mode 100644 drivers/serial/sb1250-duart.c delete mode 100644 drivers/serial/sc26xx.c delete mode 100644 drivers/serial/serial_core.c delete mode 100644 drivers/serial/serial_cs.c delete mode 100644 drivers/serial/serial_ks8695.c delete mode 100644 drivers/serial/serial_lh7a40x.c delete mode 100644 drivers/serial/serial_txx9.c delete mode 100644 drivers/serial/sh-sci.c delete mode 100644 drivers/serial/sh-sci.h delete mode 100644 drivers/serial/sn_console.c delete mode 100644 drivers/serial/suncore.c delete mode 100644 drivers/serial/suncore.h delete mode 100644 drivers/serial/sunhv.c delete mode 100644 drivers/serial/sunsab.c delete mode 100644 drivers/serial/sunsab.h delete mode 100644 drivers/serial/sunsu.c delete mode 100644 drivers/serial/sunzilog.c delete mode 100644 drivers/serial/sunzilog.h delete mode 100644 drivers/serial/timbuart.c delete mode 100644 drivers/serial/timbuart.h delete mode 100644 drivers/serial/uartlite.c delete mode 100644 drivers/serial/ucc_uart.c delete mode 100644 drivers/serial/vr41xx_siu.c delete mode 100644 drivers/serial/vt8500_serial.c delete mode 100644 drivers/serial/zs.c delete mode 100644 drivers/serial/zs.h create mode 100644 drivers/tty/serial/21285.c create mode 100644 drivers/tty/serial/68328serial.c create mode 100644 drivers/tty/serial/68328serial.h create mode 100644 drivers/tty/serial/68360serial.c create mode 100644 drivers/tty/serial/8250.c create mode 100644 drivers/tty/serial/8250.h create mode 100644 drivers/tty/serial/8250_accent.c create mode 100644 drivers/tty/serial/8250_acorn.c create mode 100644 drivers/tty/serial/8250_boca.c create mode 100644 drivers/tty/serial/8250_early.c create mode 100644 drivers/tty/serial/8250_exar_st16c554.c create mode 100644 drivers/tty/serial/8250_fourport.c create mode 100644 drivers/tty/serial/8250_gsc.c create mode 100644 drivers/tty/serial/8250_hp300.c create mode 100644 drivers/tty/serial/8250_hub6.c create mode 100644 drivers/tty/serial/8250_mca.c create mode 100644 drivers/tty/serial/8250_pci.c create mode 100644 drivers/tty/serial/8250_pnp.c create mode 100644 drivers/tty/serial/Kconfig create mode 100644 drivers/tty/serial/Makefile create mode 100644 drivers/tty/serial/altera_jtaguart.c create mode 100644 drivers/tty/serial/altera_uart.c create mode 100644 drivers/tty/serial/amba-pl010.c create mode 100644 drivers/tty/serial/amba-pl011.c create mode 100644 drivers/tty/serial/apbuart.c create mode 100644 drivers/tty/serial/apbuart.h create mode 100644 drivers/tty/serial/atmel_serial.c create mode 100644 drivers/tty/serial/bcm63xx_uart.c create mode 100644 drivers/tty/serial/bfin_5xx.c create mode 100644 drivers/tty/serial/bfin_sport_uart.c create mode 100644 drivers/tty/serial/bfin_sport_uart.h create mode 100644 drivers/tty/serial/clps711x.c create mode 100644 drivers/tty/serial/cpm_uart/Makefile create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_core.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h create mode 100644 drivers/tty/serial/crisv10.c create mode 100644 drivers/tty/serial/crisv10.h create mode 100644 drivers/tty/serial/dz.c create mode 100644 drivers/tty/serial/dz.h create mode 100644 drivers/tty/serial/icom.c create mode 100644 drivers/tty/serial/icom.h create mode 100644 drivers/tty/serial/ifx6x60.c create mode 100644 drivers/tty/serial/ifx6x60.h create mode 100644 drivers/tty/serial/imx.c create mode 100644 drivers/tty/serial/ioc3_serial.c create mode 100644 drivers/tty/serial/ioc4_serial.c create mode 100644 drivers/tty/serial/ip22zilog.c create mode 100644 drivers/tty/serial/ip22zilog.h create mode 100644 drivers/tty/serial/jsm/Makefile create mode 100644 drivers/tty/serial/jsm/jsm.h create mode 100644 drivers/tty/serial/jsm/jsm_driver.c create mode 100644 drivers/tty/serial/jsm/jsm_neo.c create mode 100644 drivers/tty/serial/jsm/jsm_tty.c create mode 100644 drivers/tty/serial/kgdboc.c create mode 100644 drivers/tty/serial/m32r_sio.c create mode 100644 drivers/tty/serial/m32r_sio.h create mode 100644 drivers/tty/serial/m32r_sio_reg.h create mode 100644 drivers/tty/serial/max3100.c create mode 100644 drivers/tty/serial/max3107-aava.c create mode 100644 drivers/tty/serial/max3107.c create mode 100644 drivers/tty/serial/max3107.h create mode 100644 drivers/tty/serial/mcf.c create mode 100644 drivers/tty/serial/mfd.c create mode 100644 drivers/tty/serial/mpc52xx_uart.c create mode 100644 drivers/tty/serial/mpsc.c create mode 100644 drivers/tty/serial/mrst_max3110.c create mode 100644 drivers/tty/serial/mrst_max3110.h create mode 100644 drivers/tty/serial/msm_serial.c create mode 100644 drivers/tty/serial/msm_serial.h create mode 100644 drivers/tty/serial/mux.c create mode 100644 drivers/tty/serial/netx-serial.c create mode 100644 drivers/tty/serial/nwpserial.c create mode 100644 drivers/tty/serial/of_serial.c create mode 100644 drivers/tty/serial/omap-serial.c create mode 100644 drivers/tty/serial/pch_uart.c create mode 100644 drivers/tty/serial/pmac_zilog.c create mode 100644 drivers/tty/serial/pmac_zilog.h create mode 100644 drivers/tty/serial/pnx8xxx_uart.c create mode 100644 drivers/tty/serial/pxa.c create mode 100644 drivers/tty/serial/s3c2400.c create mode 100644 drivers/tty/serial/s3c2410.c create mode 100644 drivers/tty/serial/s3c2412.c create mode 100644 drivers/tty/serial/s3c2440.c create mode 100644 drivers/tty/serial/s3c24a0.c create mode 100644 drivers/tty/serial/s3c6400.c create mode 100644 drivers/tty/serial/s5pv210.c create mode 100644 drivers/tty/serial/sa1100.c create mode 100644 drivers/tty/serial/samsung.c create mode 100644 drivers/tty/serial/samsung.h create mode 100644 drivers/tty/serial/sb1250-duart.c create mode 100644 drivers/tty/serial/sc26xx.c create mode 100644 drivers/tty/serial/serial_core.c create mode 100644 drivers/tty/serial/serial_cs.c create mode 100644 drivers/tty/serial/serial_ks8695.c create mode 100644 drivers/tty/serial/serial_lh7a40x.c create mode 100644 drivers/tty/serial/serial_txx9.c create mode 100644 drivers/tty/serial/sh-sci.c create mode 100644 drivers/tty/serial/sh-sci.h create mode 100644 drivers/tty/serial/sn_console.c create mode 100644 drivers/tty/serial/suncore.c create mode 100644 drivers/tty/serial/suncore.h create mode 100644 drivers/tty/serial/sunhv.c create mode 100644 drivers/tty/serial/sunsab.c create mode 100644 drivers/tty/serial/sunsab.h create mode 100644 drivers/tty/serial/sunsu.c create mode 100644 drivers/tty/serial/sunzilog.c create mode 100644 drivers/tty/serial/sunzilog.h create mode 100644 drivers/tty/serial/timbuart.c create mode 100644 drivers/tty/serial/timbuart.h create mode 100644 drivers/tty/serial/uartlite.c create mode 100644 drivers/tty/serial/ucc_uart.c create mode 100644 drivers/tty/serial/vr41xx_siu.c create mode 100644 drivers/tty/serial/vt8500_serial.c create mode 100644 drivers/tty/serial/zs.c create mode 100644 drivers/tty/serial/zs.h (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index ef51324..1e2cda1 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_XEN) += xen/ # regulators early, since some subsystems rely on them to initialize obj-$(CONFIG_REGULATOR) += regulator/ -# char/ comes before serial/ etc so that the VT console is the boot-time +# tty/ comes before char/ so that the VT console is the boot-time # default. obj-y += tty/ obj-y += char/ @@ -38,7 +38,6 @@ obj-$(CONFIG_CONNECTOR) += connector/ obj-$(CONFIG_FB_I810) += video/i810/ obj-$(CONFIG_FB_INTEL) += video/intelfb/ -obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ obj-y += base/ block/ misc/ mfd/ nfc/ obj-$(CONFIG_NUBUS) += nubus/ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0f175a8..ccac7d0 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -426,7 +426,7 @@ config SGI_MBCS If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. -source "drivers/serial/Kconfig" +source "drivers/tty/serial/Kconfig" config UNIX98_PTYS bool "Unix98 PTY support" if EMBEDDED diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c deleted file mode 100644 index d89aa38..0000000 --- a/drivers/serial/21285.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * linux/drivers/serial/21285.c - * - * Driver for the serial port on the 21285 StrongArm-110 core logic chip. - * - * Based on drivers/char/serial.c - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define BAUD_BASE (mem_fclk_21285/64) - -#define SERIAL_21285_NAME "ttyFB" -#define SERIAL_21285_MAJOR 204 -#define SERIAL_21285_MINOR 4 - -#define RXSTAT_DUMMY_READ 0x80000000 -#define RXSTAT_FRAME (1 << 0) -#define RXSTAT_PARITY (1 << 1) -#define RXSTAT_OVERRUN (1 << 2) -#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) - -#define H_UBRLCR_BREAK (1 << 0) -#define H_UBRLCR_PARENB (1 << 1) -#define H_UBRLCR_PAREVN (1 << 2) -#define H_UBRLCR_STOPB (1 << 3) -#define H_UBRLCR_FIFO (1 << 4) - -static const char serial21285_name[] = "Footbridge UART"; - -#define tx_enabled(port) ((port)->unused[0]) -#define rx_enabled(port) ((port)->unused[1]) - -/* - * The documented expression for selecting the divisor is: - * BAUD_BASE / baud - 1 - * However, typically BAUD_BASE is not divisible by baud, so - * we want to select the divisor that gives us the minimum - * error. Therefore, we want: - * int(BAUD_BASE / baud - 0.5) -> - * int(BAUD_BASE / baud - (baud >> 1) / baud) -> - * int((BAUD_BASE - (baud >> 1)) / baud) - */ - -static void serial21285_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - disable_irq_nosync(IRQ_CONTX); - tx_enabled(port) = 0; - } -} - -static void serial21285_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(IRQ_CONTX); - tx_enabled(port) = 1; - } -} - -static void serial21285_stop_rx(struct uart_port *port) -{ - if (rx_enabled(port)) { - disable_irq_nosync(IRQ_CONRX); - rx_enabled(port) = 0; - } -} - -static void serial21285_enable_ms(struct uart_port *port) -{ -} - -static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, flag, rxs, max_count = 256; - - status = *CSR_UARTFLG; - while (!(status & 0x10) && max_count--) { - ch = *CSR_UARTDR; - flag = TTY_NORMAL; - port->icount.rx++; - - rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; - if (unlikely(rxs & RXSTAT_ANYERR)) { - if (rxs & RXSTAT_PARITY) - port->icount.parity++; - else if (rxs & RXSTAT_FRAME) - port->icount.frame++; - if (rxs & RXSTAT_OVERRUN) - port->icount.overrun++; - - rxs &= port->read_status_mask; - - if (rxs & RXSTAT_PARITY) - flag = TTY_PARITY; - else if (rxs & RXSTAT_FRAME) - flag = TTY_FRAME; - } - - uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); - - status = *CSR_UARTFLG; - } - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - int count = 256; - - if (port->x_char) { - *CSR_UARTDR = port->x_char; - port->icount.tx++; - port->x_char = 0; - goto out; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - serial21285_stop_tx(port); - goto out; - } - - do { - *CSR_UARTDR = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - serial21285_stop_tx(port); - - out: - return IRQ_HANDLED; -} - -static unsigned int serial21285_tx_empty(struct uart_port *port) -{ - return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; -} - -/* no modem control lines */ -static unsigned int serial21285_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void serial21285_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int h_lcr; - - spin_lock_irqsave(&port->lock, flags); - h_lcr = *CSR_H_UBRLCR; - if (break_state) - h_lcr |= H_UBRLCR_BREAK; - else - h_lcr &= ~H_UBRLCR_BREAK; - *CSR_H_UBRLCR = h_lcr; - spin_unlock_irqrestore(&port->lock, flags); -} - -static int serial21285_startup(struct uart_port *port) -{ - int ret; - - tx_enabled(port) = 1; - rx_enabled(port) = 1; - - ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, - serial21285_name, port); - if (ret == 0) { - ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, - serial21285_name, port); - if (ret) - free_irq(IRQ_CONRX, port); - } - - return ret; -} - -static void serial21285_shutdown(struct uart_port *port) -{ - free_irq(IRQ_CONTX, port); - free_irq(IRQ_CONRX, port); -} - -static void -serial21285_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, quot, h_lcr, b; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); - termios->c_cflag |= CLOCAL; - - /* - * We don't support BREAK character recognition. - */ - termios->c_iflag &= ~(IGNBRK | BRKINT); - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - b = port->uartclk / (16 * quot); - tty_termios_encode_baud_rate(termios, b, b); - - switch (termios->c_cflag & CSIZE) { - case CS5: - h_lcr = 0x00; - break; - case CS6: - h_lcr = 0x20; - break; - case CS7: - h_lcr = 0x40; - break; - default: /* CS8 */ - h_lcr = 0x60; - break; - } - - if (termios->c_cflag & CSTOPB) - h_lcr |= H_UBRLCR_STOPB; - if (termios->c_cflag & PARENB) { - h_lcr |= H_UBRLCR_PARENB; - if (!(termios->c_cflag & PARODD)) - h_lcr |= H_UBRLCR_PAREVN; - } - - if (port->fifosize) - h_lcr |= H_UBRLCR_FIFO; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Which character status flags are we interested in? - */ - port->read_status_mask = RXSTAT_OVERRUN; - if (termios->c_iflag & INPCK) - port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; - - /* - * Which character status flags should we ignore? - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; - if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RXSTAT_OVERRUN; - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RXSTAT_DUMMY_READ; - - quot -= 1; - - *CSR_UARTCON = 0; - *CSR_L_UBRLCR = quot & 0xff; - *CSR_M_UBRLCR = (quot >> 8) & 0x0f; - *CSR_H_UBRLCR = h_lcr; - *CSR_UARTCON = 1; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *serial21285_type(struct uart_port *port) -{ - return port->type == PORT_21285 ? "DC21285" : NULL; -} - -static void serial21285_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, 32); -} - -static int serial21285_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, 32, serial21285_name) - != NULL ? 0 : -EBUSY; -} - -static void serial21285_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) - port->type = PORT_21285; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) - ret = -EINVAL; - if (ser->irq != NO_IRQ) - ret = -EINVAL; - if (ser->baud_base != port->uartclk / 16) - ret = -EINVAL; - return ret; -} - -static struct uart_ops serial21285_ops = { - .tx_empty = serial21285_tx_empty, - .get_mctrl = serial21285_get_mctrl, - .set_mctrl = serial21285_set_mctrl, - .stop_tx = serial21285_stop_tx, - .start_tx = serial21285_start_tx, - .stop_rx = serial21285_stop_rx, - .enable_ms = serial21285_enable_ms, - .break_ctl = serial21285_break_ctl, - .startup = serial21285_startup, - .shutdown = serial21285_shutdown, - .set_termios = serial21285_set_termios, - .type = serial21285_type, - .release_port = serial21285_release_port, - .request_port = serial21285_request_port, - .config_port = serial21285_config_port, - .verify_port = serial21285_verify_port, -}; - -static struct uart_port serial21285_port = { - .mapbase = 0x42000160, - .iotype = UPIO_MEM, - .irq = NO_IRQ, - .fifosize = 16, - .ops = &serial21285_ops, - .flags = UPF_BOOT_AUTOCONF, -}; - -static void serial21285_setup_ports(void) -{ - serial21285_port.uartclk = mem_fclk_21285 / 4; -} - -#ifdef CONFIG_SERIAL_21285_CONSOLE -static void serial21285_console_putchar(struct uart_port *port, int ch) -{ - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = ch; -} - -static void -serial21285_console_write(struct console *co, const char *s, - unsigned int count) -{ - uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); -} - -static void __init -serial21285_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (*CSR_UARTCON == 1) { - unsigned int tmp; - - tmp = *CSR_H_UBRLCR; - switch (tmp & 0x60) { - case 0x00: - *bits = 5; - break; - case 0x20: - *bits = 6; - break; - case 0x40: - *bits = 7; - break; - default: - case 0x60: - *bits = 8; - break; - } - - if (tmp & H_UBRLCR_PARENB) { - *parity = 'o'; - if (tmp & H_UBRLCR_PAREVN) - *parity = 'e'; - } - - tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); - - *baud = port->uartclk / (16 * (tmp + 1)); - } -} - -static int __init serial21285_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &serial21285_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (machine_is_personal_server()) - baud = 57600; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - serial21285_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver serial21285_reg; - -static struct console serial21285_console = -{ - .name = SERIAL_21285_NAME, - .write = serial21285_console_write, - .device = uart_console_device, - .setup = serial21285_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial21285_reg, -}; - -static int __init rs285_console_init(void) -{ - serial21285_setup_ports(); - register_console(&serial21285_console); - return 0; -} -console_initcall(rs285_console_init); - -#define SERIAL_21285_CONSOLE &serial21285_console -#else -#define SERIAL_21285_CONSOLE NULL -#endif - -static struct uart_driver serial21285_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyFB", - .dev_name = "ttyFB", - .major = SERIAL_21285_MAJOR, - .minor = SERIAL_21285_MINOR, - .nr = 1, - .cons = SERIAL_21285_CONSOLE, -}; - -static int __init serial21285_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: 21285 driver\n"); - - serial21285_setup_ports(); - - ret = uart_register_driver(&serial21285_reg); - if (ret == 0) - uart_add_one_port(&serial21285_reg, &serial21285_port); - - return ret; -} - -static void __exit serial21285_exit(void) -{ - uart_remove_one_port(&serial21285_reg, &serial21285_port); - uart_unregister_driver(&serial21285_reg); -} - -module_init(serial21285_init); -module_exit(serial21285_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); -MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c deleted file mode 100644 index be0ebce..0000000 --- a/drivers/serial/68328serial.c +++ /dev/null @@ -1,1472 +0,0 @@ -/* 68328serial.c: Serial port driver for 68328 microcontroller - * - * Copyright (C) 1995 David S. Miller - * Copyright (C) 1998 Kenneth Albanowski - * Copyright (C) 1998, 1999 D. Jeff Dionne - * Copyright (C) 1999 Vladimir Gurevich - * Copyright (C) 2002-2003 David McCullough - * Copyright (C) 2002 Greg Ungerer - * - * VZ Support/Fixes Evan Stawnyczy - * Multiple UART support Daniel Potts - * Power management support Daniel Potts - * VZ Second Serial Port enable Phil Wilshire - * 2.4/2.5 port David McCullough - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* (es) */ -/* note: perhaps we can murge these files, so that you can just - * define 1 of them, and they can sort that out for themselves - */ -#if defined(CONFIG_M68EZ328) -#include -#else -#if defined(CONFIG_M68VZ328) -#include -#else -#include -#endif /* CONFIG_M68VZ328 */ -#endif /* CONFIG_M68EZ328 */ - -#include "68328serial.h" - -/* Turn off usage of real serial interrupt code, to "support" Copilot */ -#ifdef CONFIG_XCOPILOT_BUGS -#undef USE_INTS -#else -#define USE_INTS -#endif - -static struct m68k_serial m68k_soft[NR_PORTS]; - -static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; - -/* multiple ports are contiguous in memory */ -m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; - -struct tty_struct m68k_ttys; -struct m68k_serial *m68k_consinfo = 0; - -#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ - -struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* Debugging... DEBUG_INTR is bad to use when one of the zs - * lines is your console ;( - */ -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#define RS_ISR_PASS_LIMIT 256 - -static void change_speed(struct m68k_serial *info); - -/* - * Setup for console. Argument comes from the boot command line. - */ - -/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ -#ifdef CONFIG_M68VZ328 -#define CONSOLE_BAUD_RATE 19200 -#define DEFAULT_CBAUD B19200 -#endif - - -#ifndef CONSOLE_BAUD_RATE -#define CONSOLE_BAUD_RATE 9600 -#define DEFAULT_CBAUD B9600 -#endif - - -static int m68328_console_initted = 0; -static int m68328_console_baud = CONSOLE_BAUD_RATE; -static int m68328_console_cbaud = DEFAULT_CBAUD; - - -static inline int serial_paranoia_check(struct m68k_serial *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct %s in %s\n"; - static const char *badinfo = - "Warning: null m68k_serial for %s in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This is used to figure out the divisor speeds and the timeouts - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 0 }; - -/* Sets or clears DTR/RTS on the requested line */ -static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) -{ - if (set) { - /* set the RTS/CTS line */ - } else { - /* clear it */ - } - return; -} - -/* Utility routines */ -static inline int get_baud(struct m68k_serial *ss) -{ - unsigned long result = 115200; - unsigned short int baud = uart_addr[ss->line].ubaud; - if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; - result >>= GET_FIELD(baud, UBAUD_DIVIDE); - - return result; -} - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - uart->ustcnt &= ~USTCNT_TXEN; - local_irq_restore(flags); -} - -static int rs_put_char(char ch) -{ - int flags, loops = 0; - - local_irq_save(flags); - - while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { - loops++; - udelay(5); - } - - UTX_TXDATA = ch; - udelay(5); - local_irq_restore(flags); - return 1; -} - -static void rs_start(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - local_irq_save(flags); - if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt |= USTCNT_TXEN; -#endif - } - local_irq_restore(flags); -} - -/* Drop into either the boot monitor or kadb upon receiving a break - * from keyboard/console input. - */ -static void batten_down_hatches(void) -{ - /* Drop into the debugger */ -} - -static void status_handle(struct m68k_serial *info, unsigned short status) -{ -#if 0 - if(status & DCD) { - if((info->port.tty->termios->c_cflag & CRTSCTS) && - ((info->curregs[3] & AUTO_ENAB)==0)) { - info->curregs[3] |= AUTO_ENAB; - info->pendregs[3] |= AUTO_ENAB; - write_zsreg(info->m68k_channel, 3, info->curregs[3]); - } - } else { - if((info->curregs[3] & AUTO_ENAB)) { - info->curregs[3] &= ~AUTO_ENAB; - info->pendregs[3] &= ~AUTO_ENAB; - write_zsreg(info->m68k_channel, 3, info->curregs[3]); - } - } -#endif - /* If this is console input and this is a - * 'break asserted' status change interrupt - * see if we can drop into the debugger - */ - if((status & URX_BREAK) && info->break_abort) - batten_down_hatches(); - return; -} - -static void receive_chars(struct m68k_serial *info, unsigned short rx) -{ - struct tty_struct *tty = info->port.tty; - m68328_uart *uart = &uart_addr[info->line]; - unsigned char ch, flag; - - /* - * This do { } while() loop will get ALL chars out of Rx FIFO - */ -#ifndef CONFIG_XCOPILOT_BUGS - do { -#endif - ch = GET_FIELD(rx, URX_RXDATA); - - if(info->is_cons) { - if(URX_BREAK & rx) { /* whee, break received */ - status_handle(info, rx); - return; -#ifdef CONFIG_MAGIC_SYSRQ - } else if (ch == 0x10) { /* ^P */ - show_state(); - show_free_areas(); - show_buffers(); -/* show_net_buffers(); */ - return; - } else if (ch == 0x12) { /* ^R */ - emergency_restart(); - return; -#endif /* CONFIG_MAGIC_SYSRQ */ - } - } - - if(!tty) - goto clear_and_exit; - - flag = TTY_NORMAL; - - if(rx & URX_PARITY_ERROR) { - flag = TTY_PARITY; - status_handle(info, rx); - } else if(rx & URX_OVRUN) { - flag = TTY_OVERRUN; - status_handle(info, rx); - } else if(rx & URX_FRAME_ERROR) { - flag = TTY_FRAME; - status_handle(info, rx); - } - tty_insert_flip_char(tty, ch, flag); -#ifndef CONFIG_XCOPILOT_BUGS - } while((rx = uart->urx.w) & URX_DATA_READY); -#endif - - tty_schedule_flip(tty); - -clear_and_exit: - return; -} - -static void transmit_chars(struct m68k_serial *info) -{ - m68328_uart *uart = &uart_addr[info->line]; - - if (info->x_char) { - /* Send next char */ - uart->utx.b.txdata = info->x_char; - info->x_char = 0; - goto clear_and_return; - } - - if((info->xmit_cnt <= 0) || info->port.tty->stopped) { - /* That's peculiar... TX ints off */ - uart->ustcnt &= ~USTCNT_TX_INTR_MASK; - goto clear_and_return; - } - - /* Send char */ - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - - if (info->xmit_cnt < WAKEUP_CHARS) - schedule_work(&info->tqueue); - - if(info->xmit_cnt <= 0) { - /* All done for now... TX ints off */ - uart->ustcnt &= ~USTCNT_TX_INTR_MASK; - goto clear_and_return; - } - -clear_and_return: - /* Clear interrupt (should be auto)*/ - return; -} - -/* - * This is the serial driver's generic interrupt routine - */ -irqreturn_t rs_interrupt(int irq, void *dev_id) -{ - struct m68k_serial *info = dev_id; - m68328_uart *uart; - unsigned short rx; - unsigned short tx; - - uart = &uart_addr[info->line]; - rx = uart->urx.w; - -#ifdef USE_INTS - tx = uart->utx.w; - - if (rx & URX_DATA_READY) receive_chars(info, rx); - if (tx & UTX_TX_AVAIL) transmit_chars(info); -#else - receive_chars(info, rx); -#endif - return IRQ_HANDLED; -} - -static void do_softint(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; -#if 0 - if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -#endif -} - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - -static int startup(struct m68k_serial * info) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (info->flags & S_INITIALIZED) - return 0; - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); - if (!info->xmit_buf) - return -ENOMEM; - } - - local_irq_save(flags); - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in change_speed()) - */ - - uart->ustcnt = USTCNT_UEN; - info->xmit_fifo_size = 1; - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; - (void)uart->urx.w; - - /* - * Finally, enable sequencing and interrupts - */ -#ifdef USE_INTS - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | - USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; -#endif - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - - change_speed(info); - - info->flags |= S_INITIALIZED; - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct m68k_serial * info) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - uart->ustcnt = 0; /* All off! */ - if (!(info->flags & S_INITIALIZED)) - return; - - local_irq_save(flags); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = 0; - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~S_INITIALIZED; - local_irq_restore(flags); -} - -struct { - int divisor, prescale; -} -#ifndef CONFIG_M68VZ328 - hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {7,0x26}, /* 300 */ - {6,0x26}, /* 600 */ - {5,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {4,0x26}, /* 2400 */ - {3,0x26}, /* 4800 */ - {2,0x26}, /* 9600 */ - {1,0x26}, /* 19200 */ - {0,0x26}, /* 38400 */ - {1,0x38}, /* 57600 */ - {0,0x38}, /* 115200 */ -}; -#else - hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {0,0}, /* 300 */ - {7,0x26}, /* 600 */ - {6,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {5,0x26}, /* 2400 */ - {4,0x26}, /* 4800 */ - {3,0x26}, /* 9600 */ - {2,0x26}, /* 19200 */ - {1,0x26}, /* 38400 */ - {0,0x26}, /* 57600 */ - {1,0x38}, /* 115200 */ -}; -#endif -/* rate = 1036800 / ((65 - prescale) * (1<line]; - unsigned short port; - unsigned short ustcnt; - unsigned cflag; - int i; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - if (!(port = info->port)) - return; - - ustcnt = uart->ustcnt; - uart->ustcnt = ustcnt & ~USTCNT_TXEN; - - i = cflag & CBAUD; - if (i & CBAUDEX) { - i = (i & ~CBAUDEX) + B38400; - } - - info->baud = baud_table[i]; - uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | - PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); - - ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); - - if ((cflag & CSIZE) == CS8) - ustcnt |= USTCNT_8_7; - - if (cflag & CSTOPB) - ustcnt |= USTCNT_STOP; - - if (cflag & PARENB) - ustcnt |= USTCNT_PARITYEN; - if (cflag & PARODD) - ustcnt |= USTCNT_ODD_EVEN; - -#ifdef CONFIG_SERIAL_68328_RTS_CTS - if (cflag & CRTSCTS) { - uart->utx.w &= ~ UTX_NOCTS; - } else { - uart->utx.w |= UTX_NOCTS; - } -#endif - - ustcnt |= USTCNT_TXEN; - - uart->ustcnt = ustcnt; - return; -} - -/* - * Fair output driver allows a process to speak. - */ -static void rs_fair_output(void) -{ - int left; /* Output no more than that */ - unsigned long flags; - struct m68k_serial *info = &m68k_soft[0]; - char c; - - if (info == 0) return; - if (info->xmit_buf == 0) return; - - local_irq_save(flags); - left = info->xmit_cnt; - while (left != 0) { - c = info->xmit_buf[info->xmit_tail]; - info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - local_irq_restore(flags); - - rs_put_char(c); - - local_irq_save(flags); - left = min(info->xmit_cnt, left-1); - } - - /* Last character is being transmitted now (hopefully). */ - udelay(5); - - local_irq_restore(flags); - return; -} - -/* - * m68k_console_print is registered for printk. - */ -void console_print_68328(const char *p) -{ - char c; - - while((c=*(p++)) != 0) { - if(c == '\n') - rs_put_char('\r'); - rs_put_char(c); - } - - /* Comment this if you want to have a strict interrupt-driven output */ - rs_fair_output(); - - return; -} - -static void rs_set_ldisc(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) - return; - - info->is_cons = (tty->termios->c_line == N_TTY); - - printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; -#ifndef USE_INTS - for(;;) { -#endif - - /* Enable transmitter */ - local_irq_save(flags); - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) { - local_irq_restore(flags); - return; - } - -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt |= USTCNT_TXEN; -#endif - -#ifdef USE_INTS - if (uart->utx.w & UTX_TX_AVAIL) { -#else - if (1) { -#endif - /* Send char */ - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - -#ifndef USE_INTS - while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); - } -#endif - local_irq_restore(flags); -} - -extern void console_printn(const char * b, int count); - -static int rs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, total = 0; - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty || !info->xmit_buf) - return 0; - - local_save_flags(flags); - while (1) { - local_irq_disable(); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - local_irq_restore(flags); - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - - local_irq_disable(); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt += c; - local_irq_restore(flags); - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - /* Enable transmitter */ - local_irq_disable(); -#ifndef USE_INTS - while(info->xmit_cnt) { -#endif - - uart->ustcnt |= USTCNT_TXEN; -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TX_INTR_MASK; -#else - while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); -#endif - if (uart->utx.w & UTX_TX_AVAIL) { - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - -#ifndef USE_INTS - } -#endif - local_irq_restore(flags); - } - - return total; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - local_irq_save(flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct * tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); - - /* Turn off RTS line (do this atomic) */ -} - -static void rs_unthrottle(struct tty_struct * tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - info->x_char = START_CHAR(tty); - } - - /* Assert RTS line (do this atomic) */ -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct m68k_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->port; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -static int set_serial_info(struct m68k_serial * info, - struct serial_struct * new_info) -{ - struct serial_struct new_serial; - struct m68k_serial old_info; - int retval = 0; - - if (!new_info) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~S_USR_MASK) != - (info->flags & ~S_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~S_USR_MASK) | - (new_serial.flags & S_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~S_FLAGS) | - (new_serial.flags & S_FLAGS)); - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - -check_and_exit: - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct m68k_serial * info, unsigned int *value) -{ -#ifdef CONFIG_SERIAL_68328_RTS_CTS - m68328_uart *uart = &uart_addr[info->line]; -#endif - unsigned char status; - unsigned long flags; - - local_irq_save(flags); -#ifdef CONFIG_SERIAL_68328_RTS_CTS - status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; -#else - status = 0; -#endif - local_irq_restore(flags); - return put_user(status, value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break(struct m68k_serial * info, unsigned int duration) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - if (!info->port) - return; - local_irq_save(flags); -#ifdef USE_INTS - uart->utx.w |= UTX_SEND_BREAK; - msleep_interruptible(duration); - uart->utx.w &= ~UTX_SEND_BREAK; -#endif - local_irq_restore(flags); -} - -static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - int error; - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - int retval; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - send_break(info, 250); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - send_break(info, arg ? arg*(100) : 250); - return 0; - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - case TIOCSERGSTRUCT: - if (copy_to_user((struct m68k_serial *) arg, - info, sizeof(struct m68k_serial))) - return -EFAULT; - return 0; - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - change_speed(info); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_start(tty); - } - -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file * filp) -{ - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk("rs_close: bad serial port count for ttyS%d: %d\n", - info->line, info->count); - info->count = 0; - } - if (info->count) { - local_irq_restore(flags); - return; - } - info->flags |= S_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != S_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - - uart->ustcnt &= ~USTCNT_RXEN; - uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); - - shutdown(info); - rs_flush_buffer(tty); - - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; -#warning "This is not and has never been valid so fix it" -#if 0 - if (tty->ldisc.num != ldiscs[N_TTY].num) { - if (tty->ldisc.close) - (tty->ldisc.close)(tty); - tty->ldisc = ldiscs[N_TTY]; - tty->termios->c_line = N_TTY; - if (tty->ldisc.open) - (tty->ldisc.open)(tty); - } -#endif - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void rs_hangup(struct tty_struct *tty) -{ - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~S_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct m68k_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & S_CLOSING) { - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= S_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - info->count--; - info->blocked_open++; - while (1) { - local_irq_disable(); - m68k_rtsdtr(info, 1); - local_irq_enable(); - current->state = TASK_INTERRUPTIBLE; - if (tty_hung_up_p(filp) || - !(info->flags & S_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & S_CLOSING) && do_clocal) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - - if (retval) - return retval; - info->flags |= S_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its S structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -int rs_open(struct tty_struct *tty, struct file * filp) -{ - struct m68k_serial *info; - int retval, line; - - line = tty->index; - - if (line >= NR_PORTS || line < 0) /* we have exactly one */ - return -ENODEV; - - info = &m68k_soft[line]; - - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - - info->count++; - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - return block_til_ready(tty, filp, info); -} - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk("MC68328 serial driver version 1.00\n"); -} - -static const struct tty_operations rs_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .set_ldisc = rs_set_ldisc, -}; - -/* rs_init inits the driver */ -static int __init -rs68328_init(void) -{ - int flags, i; - struct m68k_serial *info; - - serial_driver = alloc_tty_driver(NR_PORTS); - if (!serial_driver) - return -ENOMEM; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - /* SPARC: Not all of this is exactly right for us. */ - - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &rs_ops); - - if (tty_register_driver(serial_driver)) { - put_tty_driver(serial_driver); - printk(KERN_ERR "Couldn't register serial driver\n"); - return -ENOMEM; - } - - local_irq_save(flags); - - for(i=0;imagic = SERIAL_MAGIC; - info->port = (int) &uart_addr[i]; - info->port.tty = NULL; - info->irq = uart_irqs[i]; - info->custom_divisor = 16; - info->close_delay = 50; - info->closing_wait = 3000; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->line = i; - info->is_cons = 1; /* Means shortcuts work */ - - printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, - info->port, info->irq); - printk(" is a builtin MC68328 UART\n"); - -#ifdef CONFIG_M68VZ328 - if (i > 0 ) - PJSEL &= 0xCF; /* PSW enable second port output */ -#endif - - if (request_irq(uart_irqs[i], - rs_interrupt, - IRQF_DISABLED, - "M68328_UART", info)) - panic("Unable to attach 68328 serial interrupt\n"); - } - local_irq_restore(flags); - return 0; -} - -module_init(rs68328_init); - - - -static void m68328_set_baud(void) -{ - unsigned short ustcnt; - int i; - - ustcnt = USTCNT; - USTCNT = ustcnt & ~USTCNT_TXEN; - -again: - for (i = 0; i < ARRAY_SIZE(baud_table); i++) - if (baud_table[i] == m68328_console_baud) - break; - if (i >= ARRAY_SIZE(baud_table)) { - m68328_console_baud = 9600; - goto again; - } - - UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | - PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); - ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); - ustcnt |= USTCNT_8_7; - ustcnt |= USTCNT_TXEN; - USTCNT = ustcnt; - m68328_console_initted = 1; - return; -} - - -int m68328_console_setup(struct console *cp, char *arg) -{ - int i, n = CONSOLE_BAUD_RATE; - - if (!cp) - return(-1); - - if (arg) - n = simple_strtoul(arg,NULL,0); - - for (i = 0; i < ARRAY_SIZE(baud_table); i++) - if (baud_table[i] == n) - break; - if (i < ARRAY_SIZE(baud_table)) { - m68328_console_baud = n; - m68328_console_cbaud = 0; - if (i > 15) { - m68328_console_cbaud |= CBAUDEX; - i -= 15; - } - m68328_console_cbaud |= i; - } - - m68328_set_baud(); /* make sure baud rate changes */ - return(0); -} - - -static struct tty_driver *m68328_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - - -void m68328_console_write (struct console *co, const char *str, - unsigned int count) -{ - if (!m68328_console_initted) - m68328_set_baud(); - while (count--) { - if (*str == '\n') - rs_put_char('\r'); - rs_put_char( *str++ ); - } -} - - -static struct console m68328_driver = { - .name = "ttyS", - .write = m68328_console_write, - .device = m68328_console_device, - .setup = m68328_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - -static int __init m68328_console_init(void) -{ - register_console(&m68328_driver); - return 0; -} - -console_initcall(m68328_console_init); diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h deleted file mode 100644 index 664ceb0..0000000 --- a/drivers/serial/68328serial.h +++ /dev/null @@ -1,188 +0,0 @@ -/* 68328serial.h: Definitions for the mc68328 serial driver. - * - * Copyright (C) 1995 David S. Miller - * Copyright (C) 1998 Kenneth Albanowski - * Copyright (C) 1998, 1999 D. Jeff Dionne - * Copyright (C) 1999 Vladimir Gurevich - * - * VZ Support/Fixes Evan Stawnyczy - */ - -#ifndef _MC683XX_SERIAL_H -#define _MC683XX_SERIAL_H - - -struct serial_struct { - int type; - int line; - int port; - int irq; - int flags; - int xmit_fifo_size; - int custom_divisor; - int baud_base; - unsigned short close_delay; - char reserved_char[2]; - int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ - unsigned short closing_wait; /* time to wait before closing */ - unsigned short closing_wait2; /* no longer used... */ - int reserved[4]; -}; - -/* - * For the close wait times, 0 means wait forever for serial port to - * flush its output. 65535 means don't wait at all. - */ -#define S_CLOSING_WAIT_INF 0 -#define S_CLOSING_WAIT_NONE 65535 - -/* - * Definitions for S_struct (and serial_struct) flags field - */ -#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes - on the callout port */ -#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ -#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ -#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ - -#define S_SPD_MASK 0x0030 -#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ - -#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ -#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ - -#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ -#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ -#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ -#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ -#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ - -#define S_FLAGS 0x0FFF /* Possible legal S flags */ -#define S_USR_MASK 0x0430 /* Legal flags that non-privileged - * users can set or reset */ - -/* Internal flags used only by kernel/chr_drv/serial.c */ -#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ -#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ -#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ -#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ -#define S_CLOSING 0x08000000 /* Serial port is closing */ -#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ -#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ - -/* Software state per channel */ - -#ifdef __KERNEL__ - -/* - * I believe this is the optimal setting that reduces the number of interrupts. - * At high speeds the output might become a little "bursted" (use USTCNT_TXHE - * if that bothers you), but in most cases it will not, since we try to - * transmit characters every time rs_interrupt is called. Thus, quite often - * you'll see that a receive interrupt occures before the transmit one. - * -- Vladimir Gurevich - */ -#define USTCNT_TX_INTR_MASK (USTCNT_TXEE) - -/* - * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special - * "Old data interrupt" which occures whenever the data stay in the FIFO - * longer than 30 bits time. This allows us to use FIFO without compromising - * latency. '328 does not have this feature and without the real 328-based - * board I would assume that RXRE is the safest setting. - * - * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of - * interrupts. RXFE (receive queue full) causes the system to lose data - * at least at 115200 baud - * - * If your board is busy doing other stuff, you might consider to use - * RXRE (data ready intrrupt) instead. - * - * The other option is to make these INTR masks run-time configurable, so - * that people can dynamically adapt them according to the current usage. - * -- Vladimir Gurevich - */ - -/* (es) */ -#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328) -#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN) -#elif defined(CONFIG_M68328) -#define USTCNT_RX_INTR_MASK (USTCNT_RXRE) -#else -#error Please, define the Rx interrupt events for your CPU -#endif -/* (/es) */ - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -struct m68k_serial { - char soft_carrier; /* Use soft carrier on this channel */ - char break_abort; /* Is serial console in, so process brk/abrt */ - char is_cons; /* Is this our console. */ - - /* We need to know the current clock divisor - * to read the bps rate the chip has currently - * loaded. - */ - unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ - int baud; - int magic; - int baud_base; - int port; - int irq; - int flags; /* defined in tty.h */ - int type; /* UART type */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int xmit_fifo_size; - int custom_divisor; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int line; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; -}; - - -#define SERIAL_MAGIC 0x5301 - -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#define SERIAL_XMIT_SIZE 4096 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - -/* - * Define the number of ports supported and their irqs. - */ -#define NR_PORTS 1 -#define UART_IRQ_DEFNS {UART_IRQ_NUM} - -#endif /* __KERNEL__ */ -#endif /* !(_MC683XX_SERIAL_H) */ diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c deleted file mode 100644 index 88b1335..0000000 --- a/drivers/serial/68360serial.c +++ /dev/null @@ -1,2978 +0,0 @@ -/* - * UART driver for 68360 CPM SCC or SMC - * Copyright (c) 2000 D. Jeff Dionne , - * Copyright (c) 2000 Michael Leslie - * Copyright (c) 1997 Dan Malek - * - * I used the serial.c driver as the framework for this driver. - * Give credit to those guys. - * The original code was written for the MBX860 board. I tried to make - * it generic, but there may be some assumptions in the structures that - * have to be fixed later. - * To save porting time, I did not bother to change any object names - * that are not accessed outside of this file. - * It still needs lots of work........When it was easy, I included code - * to support the SCCs, but this has never been tested, nor is it complete. - * Only the SCCs support modem control, so that is not complete either. - * - * This module exports the following rs232 io functions: - * - * int rs_360_init(void); - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); -extern int kgdb_output_string (const char* s, unsigned int count); -#endif - - -/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ -#include -#include - -/* this defines the index into rs_table for the port to use - */ -#ifndef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ -#endif -/* #endif */ - -#if 0 -/* SCC2 for console - */ -#undef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 2 -#endif - - -#define TX_WAKEUP ASYNC_SHARE_IRQ - -static char *serial_name = "CPM UART driver"; -static char *serial_version = "0.03"; - -static struct tty_driver *serial_driver; -int serial_console_setup(struct console *co, char *options); - -/* - * Serial driver configuration section. Here are the various options: - */ -#define SERIAL_PARANOIA_CHECK -#define CONFIG_SERIAL_NOPAUSE_IO -#define SERIAL_DO_RESTART - -/* Set of debugging defines */ - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW -#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - -#define _INLINE_ inline - -#define DBG_CNT(s) - -/* We overload some of the items in the data structure to meet our - * needs. For example, the port address is the CPM parameter ram - * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and - * 2 SMCs. The "hub6" field is used to indicate the channel number, with - * a flag indicating SCC or SMC, and the number is used as an index into - * the CPM parameter area for this device. - * The "type" field is currently set to 0, for PORT_UNKNOWN. It is - * not currently used. I should probably use it to indicate the port - * type of SMC or SCC. - * The SMCs do not support any modem control signals. - */ -#define smc_scc_num hub6 -#define NUM_IS_SCC ((int)0x00010000) -#define PORT_NUM(P) ((P) & 0x0000ffff) - - -#if defined (CONFIG_UCQUICC) - -volatile extern void *_periph_base; -/* sipex transceiver - * mode bits for are on pins - * - * SCC2 d16..19 - * SCC3 d20..23 - * SCC4 d24..27 - */ -#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) - -static uint sipex_mode_bits = 0x00000000; - -#endif - -/* There is no `serial_state' defined back here in 2.0. - * Try to get by with serial_struct - */ -/* #define serial_state serial_struct */ - -/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few - * extras: */ - -#if 0 -struct async_icount_24 { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; -} icount; -#endif - -#if 0 - -struct serial_state { - int magic; - int baud_base; - unsigned long port; - int irq; - int flags; - int hub6; - int type; - int line; - int revision; /* Chip revision (950) */ - int xmit_fifo_size; - int custom_divisor; - int count; - u8 *iomem_base; - u16 iomem_reg_shift; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - struct async_icount_24 icount; - int io_type; - struct async_struct *info; -}; -#endif - -#define SSTATE_MAGIC 0x5302 - - - -/* SMC2 is sometimes used for low performance TDM interfaces. Define - * this as 1 if you want SMC2 as a serial port UART managed by this driver. - * Define this as 0 if you wish to use SMC2 for something else. - */ -#define USE_SMC2 1 - -#if 0 -/* Define SCC to ttySx mapping. */ -#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ - -/* Define which SCC is the first one to use for a serial port. These - * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used - * for Ethernet, and the first available SCC for serial UART is SCC2. - * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and - * interrupt vectors in the table below to match. - */ -#define SCC_IDX_BASE 1 /* table index */ -#endif - - -/* Processors other than the 860 only get SMCs configured by default. - * Either they don't have SCCs or they are allocated somewhere else. - * Of course, there are now 860s without some SCCs, so we will need to - * address that someday. - * The Embedded Planet Multimedia I/O cards use TDM interfaces to the - * stereo codec parts, and we use SMC2 to help support that. - */ -static struct serial_state rs_table[] = { -/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ - { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ -#if USE_SMC2 - ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ -#endif - -#if defined(CONFIG_SERIAL_68360_SCC) - ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ - ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ - ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ -#endif -}; - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) - -/* The number of buffer descriptors and their sizes. - */ -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define CONSOLE_NUM_FIFO 2 -#define CONSOLE_BUF_SIZE 4 - -char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; - -/* The async_struct in serial.h does not really give us what we - * need, so define our own here. - */ -typedef struct serial_info { - int magic; - int flags; - - struct serial_state *state; - /* struct serial_struct *state; */ - /* struct async_struct *state; */ - - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int line; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int blocked_open; /* # of blocked opens */ - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - - -/* CPM Buffer Descriptor pointers. - */ - QUICC_BD *rx_bd_base; - QUICC_BD *rx_cur; - QUICC_BD *tx_bd_base; - QUICC_BD *tx_cur; -} ser_info_t; - - -/* since kmalloc_init() does not get called until much after this initialization: */ -static ser_info_t quicc_ser_info[NR_PORTS]; -static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; -static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; - -static void change_speed(ser_info_t *info); -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); - -static inline int serial_paranoia_check(ser_info_t *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null async_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This is used to figure out the divisor speeds and the timeouts, - * indexed by the termio value. The generic CPM functions are responsible - * for setting and assigning baud rate generators for us. - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; - -/* This sucks. There is a better way: */ -#if defined(CONFIG_CONSOLE_9600) - #define CONSOLE_BAUDRATE 9600 -#elif defined(CONFIG_CONSOLE_19200) - #define CONSOLE_BAUDRATE 19200 -#elif defined(CONFIG_CONSOLE_115200) - #define CONSOLE_BAUDRATE 115200 -#else - #warning "console baud rate undefined" - #define CONSOLE_BAUDRATE 9600 -#endif - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_360_stop(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_TX; - } else { - /* smcp = &cpmp->cp_smc[idx]; */ - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_TX; - } - local_irq_restore(flags); -} - - -static void rs_360_start(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm |= UART_SCCM_TX; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm |= SMCM_TX; - } - local_irq_restore(flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static _INLINE_ void receive_chars(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - unsigned char ch, flag, *cp; - /*int ignored = 0;*/ - int i; - ushort status; - struct async_icount *icount; - /* struct async_icount_24 *icount; */ - volatile QUICC_BD *bdp; - - icount = &info->state->icount; - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = info->rx_cur; - for (;;) { - if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ - break; /* we are all done */ - - /* The read status mask tell us what we should do with - * incoming characters, especially if errors occur. - * One special case is the use of BD_SC_EMPTY. If - * this is not set, we are supposed to be ignoring - * inputs. In this case, just mark the buffer empty and - * continue. - */ - if (!(info->read_status_mask & BD_SC_EMPTY)) { - bdp->status |= BD_SC_EMPTY; - bdp->status &= - ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - continue; - } - - /* Get the number of characters and the buffer pointer. - */ - i = bdp->length; - /* cp = (unsigned char *)__va(bdp->buf); */ - cp = (char *)bdp->buf; - status = bdp->status; - - while (i-- > 0) { - ch = *cp++; - icount->rx++; - -#ifdef SERIAL_DEBUG_INTR - printk("DR%02x:%02x...", ch, status); -#endif - flag = TTY_NORMAL; - - if (status & (BD_SC_BR | BD_SC_FR | - BD_SC_PR | BD_SC_OV)) { - /* - * For statistics only - */ - if (status & BD_SC_BR) - icount->brk++; - else if (status & BD_SC_PR) - icount->parity++; - else if (status & BD_SC_FR) - icount->frame++; - if (status & BD_SC_OV) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - if (status & info->ignore_status_mask) { - if (++ignored > 100) - break; - continue; - } - */ - status &= info->read_status_mask; - - if (status & (BD_SC_BR)) { -#ifdef SERIAL_DEBUG_INTR - printk("handling break...."); -#endif - *tty->flip.flag_buf_ptr = TTY_BREAK; - if (info->flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & BD_SC_PR) - flag = TTY_PARITY; - else if (status & BD_SC_FR) - flag = TTY_FRAME; - } - tty_insert_flip_char(tty, ch, flag); - if (status & BD_SC_OV) - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - /* This BD is ready to be used again. Clear status. - * Get next BD. - */ - bdp->status |= BD_SC_EMPTY; - bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - } - - info->rx_cur = (QUICC_BD *)bdp; - - tty_schedule_flip(tty); -} - -static _INLINE_ void receive_break(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - - info->state->icount.brk++; - /* Check to see if there is room in the tty buffer for - * the break. If not, we exit now, losing the break. FIXME - */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - tty_schedule_flip(tty); -} - -static _INLINE_ void transmit_chars(ser_info_t *info) -{ - - if ((info->flags & TX_WAKEUP) || - (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { - schedule_work(&info->tqueue); - } - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif -} - -#ifdef notdef - /* I need to do this for the SCCs, so it is left as a reminder. - */ -static _INLINE_ void check_modem_status(struct async_struct *info) -{ - int status; - /* struct async_icount *icount; */ - struct async_icount_24 *icount; - - status = serial_in(info, UART_MSR); - - if (status & UART_MSR_ANY_DELTA) { - icount = &info->state->icount; - /* update input line counters */ - if (status & UART_MSR_TERI) - icount->rng++; - if (status & UART_MSR_DDSR) - icount->dsr++; - if (status & UART_MSR_DDCD) { - icount->dcd++; -#ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && - (status & UART_MSR_DCD)) - hardpps(); -#endif - } - if (status & UART_MSR_DCTS) - icount->cts++; - wake_up_interruptible(&info->delta_msr_wait); - } - - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttys%d CD now %s...", info->line, - (status & UART_MSR_DCD) ? "on" : "off"); -#endif - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("scheduling hangup..."); -#endif - queue_task(&info->tqueue_hangup, - &tq_scheduler); - } - } - if (info->flags & ASYNC_CTS_FLOW) { - if (info->port.tty->hw_stopped) { - if (status & UART_MSR_CTS) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx start..."); -#endif - info->port.tty->hw_stopped = 0; - info->IER |= UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - return; - } - } else { - if (!(status & UART_MSR_CTS)) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx stop..."); -#endif - info->port.tty->hw_stopped = 1; - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - } - } - } -} -#endif - -/* - * This is the serial driver's interrupt routine for a single port - */ -/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ -static void rs_360_interrupt(int vec, void *dev_id) -{ - u_char events; - int idx; - ser_info_t *info; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - info = dev_id; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - events = sccp->scc_scce; - if (events & SCCM_RX) - receive_chars(info); - if (events & SCCM_TX) - transmit_chars(info); - sccp->scc_scce = events; - } else { - smcp = &pquicc->smc_regs[idx]; - events = smcp->smc_smce; - if (events & SMCM_BRKE) - receive_break(info); - if (events & SMCM_RX) - receive_chars(info); - if (events & SMCM_TX) - transmit_chars(info); - smcp->smc_smce = events; - } - -#ifdef SERIAL_DEBUG_INTR - printk("rs_interrupt_single(%d, %x)...", - info->state->smc_scc_num, events); -#endif -#ifdef modem_control - check_modem_status(info); -#endif - info->last_active = jiffies; -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif -} - - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - - -static void do_softint(void *private_) -{ - ser_info_t *info = (ser_info_t *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(void *private_) -{ - struct async_struct *info = (struct async_struct *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - -static int startup(ser_info_t *info) -{ - unsigned long flags; - int retval=0; - int idx; - /*struct serial_state *state = info->state;*/ - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *scup; - - - local_irq_save(flags); - - if (info->flags & ASYNC_INITIALIZED) { - goto errout; - } - -#ifdef maybe - if (!state->port || !state->type) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - goto errout; - } -#endif - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttys%d (irq %d)...", info->line, state->irq); -#endif - - -#ifdef modem_control - info->MCR = 0; - if (info->port.tty->termios->c_cflag & CBAUD) - info->MCR = UART_MCR_DTR | UART_MCR_RTS; -#endif - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - /* - * and set the speed of the serial port - */ - change_speed(info); - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - scup = &pquicc->pram[info->state->port].scc.pscc.u; - - scup->mrblr = RX_BUF_SIZE; - scup->max_idl = RX_BUF_SIZE; - - sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); - sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Enable interrupts and I/O. - */ - smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); - - /* We can tune the buffer length and idle characters - * to take advantage of the entire incoming buffer size. - * If mrblr is something other than 1, maxidl has to be - * non-zero or we never get an interrupt. The maxidl - * is the number of character times we wait after reception - * of the last character before we decide no more characters - * are coming. - */ - /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ - /* holy unionized structures, Batman: */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - up->mrblr = RX_BUF_SIZE; - up->max_idl = RX_BUF_SIZE; - - up->brkcr = 1; /* number of break chars */ - } - - info->flags |= ASYNC_INITIALIZED; - local_irq_restore(flags); - return 0; - -errout: - local_irq_restore(flags); - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(ser_info_t *info) -{ - unsigned long flags; - struct serial_state *state; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - state = info->state; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....", info->line, - state->irq); -#endif - - local_irq_save(flags); - - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Disable interrupts and I/O. - */ - smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(ser_info_t *info) -{ - int baud_rate; - unsigned cflag, cval, scval, prev_mode; - int i, bits, sbits, idx; - unsigned long flags; - struct serial_state *state; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - - state = info->state; - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - cval = 0; - scval = 0; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: bits = 5; break; - case CS6: bits = 6; break; - case CS7: bits = 7; break; - case CS8: bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: bits = 8; break; - } - sbits = bits - 5; - - if (cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PMSR_SL; - bits++; - } - if (cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PMSR_PEN; - bits++; - } - if (!(cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); - } - - /* Determine divisor based on baud rate */ - i = cflag & CBAUD; - if (i >= (sizeof(baud_table)/sizeof(int))) - baud_rate = 9600; - else - baud_rate = baud_table[i]; - - info->timeout = (TX_BUF_SIZE*HZ*bits); - info->timeout += HZ/50; /* Add .02 seconds of slop */ - -#ifdef modem_control - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) - info->IER |= UART_IER_MSI; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - } else - info->flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - serial_out(info, UART_IER, info->IER); -#endif - - /* - * Set up parity check flag - */ - info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (I_INPCK(info->port.tty)) - info->read_status_mask |= BD_SC_FR | BD_SC_PR; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - info->read_status_mask &= ~BD_SC_EMPTY; - local_irq_save(flags); - - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_psmr = (sbits << 12) | scval; - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = smcp->smc_smcmr; - smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; - smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); - } - - m360_cpm_setbrg((state - rs_table), baud_rate); - - local_irq_restore(flags); -} - -static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; - return 1; - -} - -static int rs_360_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(buf, count)) - return ret; -#endif - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - - while (1) { - c = min(count, TX_BUF_SIZE); - - if (c <= 0) - break; - - if (bdp->status & BD_SC_READY) { - info->flags |= TX_WAKEUP; - break; - } - - /* memcpy(__va(bdp->buf), buf, c); */ - memcpy((void *)bdp->buf, buf, c); - - bdp->length = c; - bdp->status |= BD_SC_READY; - - buf += c; - count -= c; - ret += c; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - info->tx_cur = (QUICC_BD *)bdp; - } - return ret; -} - -static int rs_360_write_room(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - - if ((info->tx_cur->status & BD_SC_READY) == 0) { - info->flags &= ~TX_WAKEUP; - ret = TX_BUF_SIZE; - } - else { - info->flags |= TX_WAKEUP; - ret = 0; - } - return ret; -} - -/* I could track this with transmit counters....maybe later. -*/ -static int rs_360_chars_in_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return 0; -} - -static void rs_360_flush_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - - /* There is nothing to "flush", whatever we gave the CPM - * is on its way out. - */ - tty_wakeup(tty); - info->flags &= ~TX_WAKEUP; -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void rs_360_send_xchar(struct tty_struct *tty, char ch) -{ - volatile QUICC_BD *bdp; - - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_send_char")) - return; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_360_throttle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - rs_360_send_xchar(tty, STOP_CHAR(tty)); - -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR &= ~UART_MCR_RTS; - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -static void rs_360_unthrottle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_360_send_xchar(tty, START_CHAR(tty)); - } -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR |= UART_MCR_RTS; - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -#ifdef maybe -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct async_struct * info, unsigned int *value) -{ - unsigned char status; - unsigned int result; - - local_irq_disable(); - status = serial_in(info, UART_LSR); - local_irq_enable(); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result,value); -} -#endif - -static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int result = 0; -#ifdef modem_control - unsigned char control, status; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - local_irq_disable(); - status = serial_in(info, UART_MSR); - local_irq_enable(); - result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) -#ifdef TIOCM_OUT1 - | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) - | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) -#endif - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -#endif - return result; -} - -static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ -#ifdef modem_control - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int arg; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - /* FIXME: locking on info->mcr */ - if (set & TIOCM_RTS) - info->mcr |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->mcr |= UART_MCR_DTR; - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - -#ifdef TIOCM_OUT1 - if (set & TIOCM_OUT1) - info->MCR |= UART_MCR_OUT1; - if (set & TIOCM_OUT2) - info->MCR |= UART_MCR_OUT2; - if (clear & TIOCM_OUT1) - info->MCR &= ~UART_MCR_OUT1; - if (clear & TIOCM_OUT2) - info->MCR &= ~UART_MCR_OUT2; -#endif - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif - return 0; -} - -/* Sending a break is a two step process on the SMC/SCC. It is accomplished - * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT - * command. We take advantage of the begin/end functions to make this - * happen. - */ -static ushort smc_chan_map[] = { - CPM_CR_CH_SMC1, - CPM_CR_CH_SMC2 -}; - -static ushort scc_chan_map[] = { - CPM_CR_CH_SCC1, - CPM_CR_CH_SCC2, - CPM_CR_CH_SCC3, - CPM_CR_CH_SCC4 -}; - -static void begin_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -static void end_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break(ser_info_t *info, unsigned int duration) -{ -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); -#endif - begin_break(info); - msleep_interruptible(duration); - end_break(info); -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("done jiffies=%lu\n", jiffies); -#endif -} - - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int rs_360_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct async_icount cnow; - - local_irq_disable(); - cnow = info->state->icount; - local_irq_enable(); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - - return 0; -} - -static int rs_360_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - int error; - ser_info_t *info = (ser_info_t *)tty->driver_data; - int retval; - struct async_icount cnow; - /* struct async_icount_24 cnow;*/ /* kernel counter temps */ - struct serial_icounter_struct *p_cuser; /* user space */ - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - if (!arg) { - send_break(info, 250); /* 1/4 second */ - if (signal_pending(current)) - return -EINTR; - } - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - send_break(info, arg ? arg*100 : 250); - if (signal_pending(current)) - return -EINTR; - return 0; - case TIOCSBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - begin_break(info); - return 0; - case TIOCCBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - end_break(info); - return 0; -#ifdef maybe - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); -#endif - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: -#ifdef modem_control - local_irq_disable(); - /* note the counters on entry */ - cprev = info->state->icount; - local_irq_enable(); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - local_irq_disable(); - cnow = info->state->icount; /* atomic copy */ - local_irq_enable(); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ -#else - return 0; -#endif - - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* FIX UP modem control here someday...... -*/ -static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - change_speed(info); - -#ifdef modem_control - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(tty->termios->c_cflag & CBAUD)) { - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (tty->termios->c_cflag & CBAUD)) { - info->MCR |= UART_MCR_DTR; - if (!tty->hw_stopped || - !(tty->termios->c_cflag & CRTSCTS)) { - info->MCR |= UART_MCR_RTS; - } - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_360_start(tty); - } -#endif - -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_360_close(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - /* struct async_state *state; */ - struct serial_state *state; - unsigned long flags; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - state = info->state; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, state->count); -#endif - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", - info->line, state->count); - state->count = 0; - } - if (state->count) { - DBG_CNT("before DEC-2"); - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->read_status_mask &= ~BD_SC_EMPTY; - if (info->flags & ASYNC_INITIALIZED) { - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_RX; - sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_RX; - smcp->smc_smcmr &= ~SMCMR_REN; - } - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_360_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_360_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned long orig_jiffies, char_time; - /*int lsr;*/ - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - -#ifdef maybe - if (info->state->type == PORT_UNKNOWN) - return; -#endif - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = 1; - if (timeout) - char_time = min(char_time, (unsigned long)timeout); -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - - /* We go through the loop at least once because we can't tell - * exactly when the last character exits the shifter. There can - * be at least two characters waiting to be sent after the buffers - * are empty. - */ - do { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif -/* current->counter = 0; make us low-priority */ - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && (time_after(jiffies, orig_jiffies + timeout))) - break; - /* The 'tx_cur' is really the next buffer to send. We - * have to back up to the previous BD and wait for it - * to go. This isn't perfect, because all this indicates - * is the buffer is available. There are still characters - * in the CPM FIFO. - */ - bdp = info->tx_cur; - if (bdp == info->tx_bd_base) - bdp += (TX_NUM_FIFO-1); - else - bdp--; - } while (bdp->status & BD_SC_READY); - current->state = TASK_RUNNING; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rs_360_hangup(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct serial_state *state = info->state; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - state = info->state; - - rs_360_flush_buffer(tty); - shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - ser_info_t *info) -{ -#ifdef DO_THIS_LATER - DECLARE_WAITQUEUE(wait, current); -#endif - struct serial_state *state = info->state; - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - * If this is an SMC port, we don't have modem control to wait - * for, so just get out here. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR)) || - !(info->state->smc_scc_num & NUM_IS_SCC)) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; -#ifdef DO_THIS_LATER - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", - state->line, state->count); -#endif - local_irq_disable(); - if (!tty_hung_up_p(filp)) - state->count--; - local_irq_enable(); - info->blocked_open++; - while (1) { - local_irq_disable(); - if (tty->termios->c_cflag & CBAUD) - serial_out(info, UART_MCR, - serial_inp(info, UART_MCR) | - (UART_MCR_DTR | UART_MCR_RTS)); - local_irq_enable(); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (serial_in(info, UART_MSR) & - UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - state->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif -#endif /* DO_THIS_LATER */ - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int get_async_struct(int line, ser_info_t **ret_info) -{ - struct serial_state *sstate; - - sstate = rs_table + line; - if (sstate->info) { - sstate->count++; - *ret_info = (ser_info_t *)sstate->info; - return 0; - } - else { - return -ENOMEM; - } -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_360_open(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - retval = get_async_struct(line, &info); - if (retval) - return retval; - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s, count = %d\n", tty->name, info->state->count); -#endif - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline int line_info(char *buf, struct serial_state *state) -{ -#ifdef notdef - struct async_struct *info = state->info, scr_info; - char stat_buf[30], control, status; -#endif - int ret; - - ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", - state->line, - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", - (unsigned int)(state->port), state->irq); - - if (!state->port || (state->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; - } - -#ifdef notdef - /* - * Figure out the current RS-232 lines - */ - if (!info) { - info = &scr_info; /* This is just for serial_{in,out} */ - - info->magic = SERIAL_MAGIC; - info->port = state->port; - info->flags = state->flags; - info->quot = 0; - info->port.tty = NULL; - } - local_irq_disable(); - status = serial_in(info, UART_MSR); - control = info ? info->MCR : serial_in(info, UART_MCR); - local_irq_enable(); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (control & UART_MCR_RTS) - strcat(stat_buf, "|RTS"); - if (status & UART_MSR_CTS) - strcat(stat_buf, "|CTS"); - if (control & UART_MCR_DTR) - strcat(stat_buf, "|DTR"); - if (status & UART_MSR_DSR) - strcat(stat_buf, "|DSR"); - if (status & UART_MSR_DCD) - strcat(stat_buf, "|CD"); - if (status & UART_MSR_RI) - strcat(stat_buf, "|RI"); - - if (info->quot) { - ret += sprintf(buf+ret, " baud:%d", - state->baud_base / info->quot); - } - - ret += sprintf(buf+ret, " tx:%d rx:%d", - state->icount.tx, state->icount.rx); - - if (state->icount.frame) - ret += sprintf(buf+ret, " fe:%d", state->icount.frame); - - if (state->icount.parity) - ret += sprintf(buf+ret, " pe:%d", state->icount.parity); - - if (state->icount.brk) - ret += sprintf(buf+ret, " brk:%d", state->icount.brk); - - if (state->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); -#endif - return ret; -} - -int rs_360_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - int i, len = 0; - off_t begin = 0; - - len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { - len += line_info(page + len, &rs_table[i]); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } - } - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (begin-off); - return ((count < begin+len-off) ? count : begin+len-off); -} - -/* - * --------------------------------------------------------------------- - * rs_init() and friends - * - * rs_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ -static _INLINE_ void show_serial_version(void) -{ - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); -} - - -/* - * The serial console driver used during boot. Note that these names - * clash with those found in "serial.c", so we currently can't support - * the 16xxx uarts and these at the same time. I will fix this to become - * an indirect function call from tty_io.c (or something). - */ - -#ifdef CONFIG_SERIAL_CONSOLE - -/* - * Print a string to the serial port trying not to disturb any possible - * real use of the port... - */ -static void my_console_write(int idx, const char *s, - unsigned count) -{ - struct serial_state *ser; - ser_info_t *info; - unsigned i; - QUICC_BD *bdp, *bdbase; - volatile struct smc_uart_pram *up; - volatile u_char *cp; - - ser = rs_table + idx; - - - /* If the port has been initialized for general use, we have - * to use the buffer descriptors allocated there. Otherwise, - * we simply use the single buffer allocated. - */ - if ((info = (ser_info_t *)ser->info) != NULL) { - bdp = info->tx_cur; - bdbase = info->tx_bd_base; - } - else { - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - /* Get the address of the host memory buffer. - */ - bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - } - - /* - * We need to gracefully shut down the transmitter, disable - * interrupts, then send our bytes out. - */ - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while (bdp->status & BD_SC_READY); - - /* Send the character out. - */ - cp = bdp->buf; - *cp = *s; - - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while (bdp->status & BD_SC_READY); - /* cp = __va(bdp->buf); */ - cp = bdp->buf; - *cp = 13; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) { - bdp = bdbase; - } - else { - bdp++; - } - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while (bdp->status & BD_SC_READY); - - if (info) - info->tx_cur = (QUICC_BD *)bdp; -} - -static void serial_console_write(struct console *c, const char *s, - unsigned count) -{ -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(s, count)) - return; -#endif - my_console_write(c->index, s, count); -} - - - -/*void console_print_68360(const char *p) -{ - const char *cp = p; - int i; - - for (i=0;cp[i]!=0;i++); - - serial_console_write (p, i); - - //Comment this if you want to have a strict interrupt-driven output - //rs_fair_output(); - - return; -}*/ - - - - - - -#ifdef CONFIG_XMON -int -xmon_360_write(const char *s, unsigned count) -{ - my_console_write(0, s, count); - return(count); -} -#endif - -#ifdef CONFIG_KGDB -void -putDebugChar(char ch) -{ - my_console_write(0, &ch, 1); -} -#endif - -/* - * Receive character from the serial port. This only works well - * before the port is initialized for real use. - */ -static int my_console_wait_key(int idx, int xmon, char *obuf) -{ - struct serial_state *ser; - u_char c, *cp; - ser_info_t *info; - QUICC_BD *bdp; - volatile struct smc_uart_pram *up; - int i; - - ser = rs_table + idx; - - /* Get the address of the host memory buffer. - * If the port has been initialized for general use, we must - * use information from the port structure. - */ - if ((info = (ser_info_t *)ser->info)) - bdp = info->rx_cur; - else - /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ - bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - /* - * We need to gracefully shut down the receiver, disable - * interrupts, then read the input. - * XMON just wants a poll. If no character, return -1, else - * return the character. - */ - if (!xmon) { - while (bdp->status & BD_SC_EMPTY); - } - else { - if (bdp->status & BD_SC_EMPTY) - return -1; - } - - cp = (char *)bdp->buf; - - if (obuf) { - i = c = bdp->length; - while (i-- > 0) - *obuf++ = *cp++; - } - else { - c = *cp; - } - bdp->status |= BD_SC_EMPTY; - - if (info) { - if (bdp->status & BD_SC_WRAP) { - bdp = info->rx_bd_base; - } - else { - bdp++; - } - info->rx_cur = (QUICC_BD *)bdp; - } - - return((int)c); -} - -static int serial_console_wait_key(struct console *co) -{ - return(my_console_wait_key(co->index, 0, NULL)); -} - -#ifdef CONFIG_XMON -int -xmon_360_read_poll(void) -{ - return(my_console_wait_key(0, 1, NULL)); -} - -int -xmon_360_read_char(void) -{ - return(my_console_wait_key(0, 0, NULL)); -} -#endif - -#ifdef CONFIG_KGDB -static char kgdb_buf[RX_BUF_SIZE], *kgdp; -static int kgdb_chars; - -unsigned char -getDebugChar(void) -{ - if (kgdb_chars <= 0) { - kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); - kgdp = kgdb_buf; - } - kgdb_chars--; - - return(*kgdp++); -} - -void kgdb_interruptible(int state) -{ -} -void kgdb_map_scc(void) -{ - struct serial_state *ser; - uint mem_addr; - volatile QUICC_BD *bdp; - volatile smc_uart_t *up; - - cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - - /* To avoid data cache CPM DMA coherency problems, allocate a - * buffer in the CPM DPRAM. This will work until the CPM and - * serial ports are initialized. At that time a memory buffer - * will be allocated. - * The port is already initialized from the boot procedure, all - * we do here is give it a different buffer and make it a FIFO. - */ - - ser = rs_table; - - /* Right now, assume we are using SMCs. - */ - up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; - - /* Allocate space for an input FIFO, plus a few bytes for output. - * Allocate bytes to maintain word alignment. - */ - mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; - bdp->buf = mem_addr; - - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; - bdp->buf = mem_addr+RX_BUF_SIZE; - - up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ - up->smc_maxidl = RX_BUF_SIZE; -} -#endif - -static struct tty_struct *serial_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - - -struct console sercons = { - .name = "ttyS", - .write = serial_console_write, - .device = serial_console_device, - .wait_key = serial_console_wait_key, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = CONFIG_SERIAL_CONSOLE_PORT, -}; - - - -/* - * Register console. - */ -long console_360_init(long kmem_start, long kmem_end) -{ - register_console(&sercons); - /*register_console (console_print_68360); - 2.0.38 only required a write - function pointer. */ - return kmem_start; -} - -#endif - -/* Index in baud rate table of the default console baud rate. -*/ -static int baud_idx; - -static const struct tty_operations rs_360_ops = { - .owner = THIS_MODULE, - .open = rs_360_open, - .close = rs_360_close, - .write = rs_360_write, - .put_char = rs_360_put_char, - .write_room = rs_360_write_room, - .chars_in_buffer = rs_360_chars_in_buffer, - .flush_buffer = rs_360_flush_buffer, - .ioctl = rs_360_ioctl, - .throttle = rs_360_throttle, - .unthrottle = rs_360_unthrottle, - /* .send_xchar = rs_360_send_xchar, */ - .set_termios = rs_360_set_termios, - .stop = rs_360_stop, - .start = rs_360_start, - .hangup = rs_360_hangup, - /* .wait_until_sent = rs_360_wait_until_sent, */ - /* .read_proc = rs_360_read_proc, */ - .tiocmget = rs_360_tiocmget, - .tiocmset = rs_360_tiocmset, -}; - -static int __init rs_360_init(void) -{ - struct serial_state * state; - ser_info_t *info; - void *mem_addr; - uint dp_addr, iobits; - int i, j, idx; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct smc_uart_pram *up; - volatile struct scc_regs *scp; - volatile struct uart_pram *sup; - /* volatile immap_t *immap; */ - - serial_driver = alloc_tty_driver(NR_PORTS); - if (!serial_driver) - return -1; - - show_serial_version(); - - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - baud_idx | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &rs_360_ops); - - if (tty_register_driver(serial_driver)) - panic("Couldn't register serial driver\n"); - - cp = pquicc; /* Get pointer to Communication Processor */ - /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ - - - /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. - */ - /* The "standard" configuration through the 860. - */ -/* immap->im_ioport.iop_papar |= 0x00fc; */ -/* immap->im_ioport.iop_padir &= ~0x00fc; */ -/* immap->im_ioport.iop_paodr &= ~0x00fc; */ - cp->pio_papar |= 0x00fc; - cp->pio_padir &= ~0x00fc; - /* cp->pio_paodr &= ~0x00fc; */ - - - /* Since we don't yet do modem control, connect the port C pins - * as general purpose I/O. This will assert CTS and CD for the - * SCC ports. - */ - /* FIXME: see 360um p.7-365 and 860um p.34-12 - * I can't make sense of these bits - mleslie*/ -/* immap->im_ioport.iop_pcdir |= 0x03c6; */ -/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ - -/* cp->pio_pcdir |= 0x03c6; */ -/* cp->pio_pcpar &= ~0x03c6; */ - - - - /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and - * BRG4 to SCC3. - */ - cp->si_sicr &= ~0x00ffff00; - cp->si_sicr |= 0x001b1200; - -#ifdef CONFIG_PP04 - /* Frequentis PP04 forced to RS-232 until we know better. - * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. - */ - immap->im_ioport.iop_pcdir |= 0x000c; - immap->im_ioport.iop_pcpar &= ~0x000c; - immap->im_ioport.iop_pcdat &= ~0x000c; - - /* This enables the TX driver. - */ - cp->cp_pbpar &= ~0x6000; - cp->cp_pbdat &= ~0x6000; -#endif - - for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { - state->magic = SSTATE_MAGIC; - state->line = i; - state->type = PORT_UNKNOWN; - state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; - state->icount.cts = state->icount.dsr = - state->icount.rng = state->icount.dcd = 0; - state->icount.rx = state->icount.tx = 0; - state->icount.frame = state->icount.parity = 0; - state->icount.overrun = state->icount.brk = 0; - printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", - i, (unsigned int)(state->irq), - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); - -#ifdef CONFIG_SERIAL_CONSOLE - /* If we just printed the message on the console port, and - * we are about to initialize it for general use, we have - * to wait a couple of character times for the CR/NL to - * make it out of the transmit buffer. - */ - if (i == CONFIG_SERIAL_CONSOLE_PORT) - mdelay(8); - - -/* idx = PORT_NUM(info->state->smc_scc_num); */ -/* if (info->state->smc_scc_num & NUM_IS_SCC) */ -/* chan = scc_chan_map[idx]; */ -/* else */ -/* chan = smc_chan_map[idx]; */ - -/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ -/* while (cp->cp_cr & CPM_CR_FLG); */ - -#endif - /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ - info = &quicc_ser_info[i]; - if (info) { - memset (info, 0, sizeof(ser_info_t)); - info->magic = SERIAL_MAGIC; - info->line = i; - info->flags = state->flags; - INIT_WORK(&info->tqueue, do_softint, info); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->state = state; - state->info = (struct async_struct *)info; - - /* We need to allocate a transmit and receive buffer - * descriptors from dual port ram, and a character - * buffer area from host mem. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - * (for now this is from a static array of buffers :( - */ - /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ - /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->rx_cur = info->rx_bd_base = bdp; - - /* initialize rx buffer descriptors */ - for (j=0; j<(RX_NUM_FIFO-1); j++) { - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; - mem_addr += RX_BUF_SIZE; - bdp++; - } - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; - - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - -#if defined (CONFIG_UCQUICC) && 1 - /* set the transceiver mode to RS232 */ - sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ - sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); - *(uint *)_periph_base = sipex_mode_bits; - /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ -#endif - } - - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ - /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; - - /* initialize tx buffer descriptors */ - for (j=0; j<(TX_NUM_FIFO-1); j++) { - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = BD_SC_INTRPT; - mem_addr += TX_BUF_SIZE; - bdp++; - } - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); - - if (info->state->smc_scc_num & NUM_IS_SCC) { - scp = &pquicc->scc_regs[idx]; - sup = &pquicc->pram[info->state->port].scc.pscc.u; - sup->rbase = dp_addr; - sup->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - /* execute the INIT RX & TX PARAMS command for this channel. */ - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - } - else { - /* Configure SMCs Tx/Rx instead of port B - * parallel I/O. - */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - up->rbase = dp_addr; - - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (i << ((idx * 16) + 12)); - - up->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - up->mrblr = 1; - up->max_idl = 0; - up->brkcr = 1; - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, - CPM_CR_INIT_TRX) | CPM_CR_FLG; -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - printk(""); -#endif - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Disable all interrupts and clear all pending - * events. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -#endif - } - - /* Install interrupt handler. - */ - /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ - /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ - request_irq(state->irq, rs_360_interrupt, - IRQ_FLG_LOCK, "ttyS", (void *)info); - - /* Set up the baud rate generator. - */ - m360_cpm_setbrg(i, baud_table[baud_idx]); - - } - } - - return 0; -} -module_init(rs_360_init); - -/* This must always be called before the rs_360_init() function, otherwise - * it blows away the port control information. - */ -//static int __init serial_console_setup( struct console *co, char *options) -int serial_console_setup( struct console *co, char *options) -{ - struct serial_state *ser; - uint mem_addr, dp_addr, bidx, idx, iobits; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct scc_regs *scp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *sup; - -/* mleslie TODO: - * add something to the 68k bootloader to store a desired initial console baud rate */ - -/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ -/* bd = (bd_t *)__res; */ - - for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) - /* if (bd->bi_baudrate == baud_table[bidx]) */ - if (CONSOLE_BAUDRATE == baud_table[bidx]) - break; - - /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ - baud_idx = bidx; - - ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; - - cp = pquicc; /* Get pointer to Communication Processor */ - - idx = PORT_NUM(ser->smc_scc_num); - if (ser->smc_scc_num & NUM_IS_SCC) { - - /* TODO: need to set up SCC pin assignment etc. here */ - - } - else { - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (idx << ((idx * 16) + 12)); - } - - /* When we get here, the CPM has been reset, so we need - * to configure the port. - * We need to allocate a transmit and receive buffer descriptor - * from dual port ram, and a character buffer area from host mem. - */ - - /* Allocate space for two buffer descriptors in the DP ram. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); - - /* Allocate space for two 2 byte FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(8); */ - mem_addr = (uint)console_fifos; - - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - bdp->buf = (char *)mem_addr; - (bdp+1)->buf = (char *)(mem_addr+4); - - /* For the receive, set empty and wrap. - * For transmit, set wrap. - */ - bdp->status = BD_SC_EMPTY | BD_SC_WRAP; - (bdp+1)->status = BD_SC_WRAP; - - /* Set up the uart parameters in the parameter ram. - */ - if (ser->smc_scc_num & NUM_IS_SCC) { - scp = &cp->scc_regs[idx]; - /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ - sup = &pquicc->pram[ser->port].scc.pscc.u; - - sup->rbase = dp_addr; - sup->tbase = dp_addr + sizeof(QUICC_BD); - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } - else { - /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - up->rbase = dp_addr; /* Base of receive buffer desc. */ - up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single character interrupts. - */ - up->mrblr = 1; /* receive buffer length */ - up->max_idl = 0; /* wait forever for next char */ - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* And finally, enable Rx and Tx. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - } - - /* Set up the baud rate generator. - */ - /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ - m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); - - return 0; -} - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c deleted file mode 100644 index b25e6e4..0000000 --- a/drivers/serial/8250.c +++ /dev/null @@ -1,3377 +0,0 @@ -/* - * linux/drivers/char/8250.c - * - * Driver for 8250/16550-type serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. - * membase is an 'ioremapped' cookie. - */ - -#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "8250.h" - -#ifdef CONFIG_SPARC -#include "suncore.h" -#endif - -/* - * Configuration: - * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option - * is unsafe when used on edge-triggered interrupts. - */ -static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; - -static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; - -static struct uart_driver serial8250_reg; - -static int serial_index(struct uart_port *port) -{ - return (serial8250_reg.minor - 64) + port->line; -} - -static unsigned int skip_txen_test; /* force skip of txen test at init time */ - -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - -#define PASS_LIMIT 256 - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - - -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define CONFIG_SERIAL_DETECT_IRQ 1 -#endif -#ifdef CONFIG_SERIAL_8250_MANY_PORTS -#define CONFIG_SERIAL_MANY_PORTS 1 -#endif - -/* - * HUB6 is always on. This will be removed once the header - * files have been cleaned. - */ -#define CONFIG_HUB6 1 - -#include -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#ifndef SERIAL_PORT_DFNS -#define SERIAL_PORT_DFNS -#endif - -static const struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS /* defined in asm/serial.h */ -}; - -#define UART_NR CONFIG_SERIAL_8250_NR_UARTS - -#ifdef CONFIG_SERIAL_8250_RSA - -#define PORT_RSA_MAX 4 -static unsigned long probe_rsa[PORT_RSA_MAX]; -static unsigned int probe_rsa_count; -#endif /* CONFIG_SERIAL_8250_RSA */ - -struct uart_8250_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short capabilities; /* port capabilities */ - unsigned short bugs; /* port bugs */ - unsigned int tx_loadsz; /* transmit fifo load size */ - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char cur_iotype; /* Running I/O type */ - - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ -#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS - unsigned char lsr_saved_flags; -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - unsigned char msr_saved_flags; -}; - -struct irq_info { - struct hlist_node node; - int irq; - spinlock_t lock; /* Protects list not the hash */ - struct list_head *head; -}; - -#define NR_IRQ_HASH 32 /* Can be adjusted later */ -static struct hlist_head irq_lists[NR_IRQ_HASH]; -static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial8250_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_8250] = { - .name = "8250", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16450] = { - .name = "16450", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16550] = { - .name = "16550", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16550A] = { - .name = "16550A", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_CIRRUS] = { - .name = "Cirrus", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16650] = { - .name = "ST16650", - .fifo_size = 1, - .tx_loadsz = 1, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16650V2] = { - .name = "ST16650V2", - .fifo_size = 32, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | - UART_FCR_T_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16750] = { - .name = "TI16750", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | - UART_FCR7_64BYTE, - .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, - }, - [PORT_STARTECH] = { - .name = "Startech", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16C950] = { - .name = "16C950/954", - .fifo_size = 128, - .tx_loadsz = 128, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16654] = { - .name = "ST16654", - .fifo_size = 64, - .tx_loadsz = 32, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | - UART_FCR_T_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16850] = { - .name = "XR16850", - .fifo_size = 128, - .tx_loadsz = 128, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_RSA] = { - .name = "RSA", - .fifo_size = 2048, - .tx_loadsz = 2048, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, - .flags = UART_CAP_FIFO, - }, - [PORT_NS16550A] = { - .name = "NS16550A", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_NATSEMI, - }, - [PORT_XSCALE] = { - .name = "XScale", - .fifo_size = 32, - .tx_loadsz = 32, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_UUE, - }, - [PORT_RM9000] = { - .name = "RM9000", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_OCTEON] = { - .name = "OCTEON", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_AR7] = { - .name = "AR7", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_AFE, - }, - [PORT_U6_16550A] = { - .name = "U6_16550A", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_AFE, - }, -}; - -#if defined(CONFIG_MIPS_ALCHEMY) - -/* Au1x00 UART hardware has a weird register layout */ -static const u8 au_io_in_map[] = { - [UART_RX] = 0, - [UART_IER] = 2, - [UART_IIR] = 3, - [UART_LCR] = 5, - [UART_MCR] = 6, - [UART_LSR] = 7, - [UART_MSR] = 8, -}; - -static const u8 au_io_out_map[] = { - [UART_TX] = 1, - [UART_IER] = 2, - [UART_FCR] = 4, - [UART_LCR] = 5, - [UART_MCR] = 6, -}; - -/* sane hardware needs no mapping */ -static inline int map_8250_in_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_AU) - return offset; - return au_io_in_map[offset]; -} - -static inline int map_8250_out_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_AU) - return offset; - return au_io_out_map[offset]; -} - -#elif defined(CONFIG_SERIAL_8250_RM9K) - -static const u8 - regmap_in[8] = { - [UART_RX] = 0x00, - [UART_IER] = 0x0c, - [UART_IIR] = 0x14, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }, - regmap_out[8] = { - [UART_TX] = 0x04, - [UART_IER] = 0x0c, - [UART_FCR] = 0x18, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }; - -static inline int map_8250_in_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_RM9000) - return offset; - return regmap_in[offset]; -} - -static inline int map_8250_out_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_RM9000) - return offset; - return regmap_out[offset]; -} - -#else - -/* sane hardware needs no mapping */ -#define map_8250_in_reg(up, offset) (offset) -#define map_8250_out_reg(up, offset) (offset) - -#endif - -static unsigned int hub6_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - outb(p->hub6 - 1 + offset, p->iobase); - return inb(p->iobase + 1); -} - -static void hub6_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - outb(p->hub6 - 1 + offset, p->iobase); - outb(value, p->iobase + 1); -} - -static unsigned int mem_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return readb(p->membase + offset); -} - -static void mem_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - writeb(value, p->membase + offset); -} - -static void mem32_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - writel(value, p->membase + offset); -} - -static unsigned int mem32_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return readl(p->membase + offset); -} - -static unsigned int au_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return __raw_readl(p->membase + offset); -} - -static void au_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - __raw_writel(value, p->membase + offset); -} - -static unsigned int tsi_serial_in(struct uart_port *p, int offset) -{ - unsigned int tmp; - offset = map_8250_in_reg(p, offset) << p->regshift; - if (offset == UART_IIR) { - tmp = readl(p->membase + (UART_IIR & ~3)); - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ - } else - return readb(p->membase + offset); -} - -static void tsi_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - if (!((offset == UART_IER) && (value & UART_IER_UUE))) - writeb(value, p->membase + offset); -} - -/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */ -static inline void dwapb_save_out_value(struct uart_port *p, int offset, - int value) -{ - struct uart_8250_port *up = - container_of(p, struct uart_8250_port, port); - - if (offset == UART_LCR) - up->lcr = value; -} - -/* Read the IER to ensure any interrupt is cleared before returning from ISR. */ -static inline void dwapb_check_clear_ier(struct uart_port *p, int offset) -{ - if (offset == UART_TX || offset == UART_IER) - p->serial_in(p, UART_IER); -} - -static void dwapb_serial_out(struct uart_port *p, int offset, int value) -{ - int save_offset = offset; - offset = map_8250_out_reg(p, offset) << p->regshift; - dwapb_save_out_value(p, save_offset, value); - writeb(value, p->membase + offset); - dwapb_check_clear_ier(p, save_offset); -} - -static void dwapb32_serial_out(struct uart_port *p, int offset, int value) -{ - int save_offset = offset; - offset = map_8250_out_reg(p, offset) << p->regshift; - dwapb_save_out_value(p, save_offset, value); - writel(value, p->membase + offset); - dwapb_check_clear_ier(p, save_offset); -} - -static unsigned int io_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return inb(p->iobase + offset); -} - -static void io_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - outb(value, p->iobase + offset); -} - -static void set_io_from_upio(struct uart_port *p) -{ - struct uart_8250_port *up = - container_of(p, struct uart_8250_port, port); - switch (p->iotype) { - case UPIO_HUB6: - p->serial_in = hub6_serial_in; - p->serial_out = hub6_serial_out; - break; - - case UPIO_MEM: - p->serial_in = mem_serial_in; - p->serial_out = mem_serial_out; - break; - - case UPIO_RM9000: - case UPIO_MEM32: - p->serial_in = mem32_serial_in; - p->serial_out = mem32_serial_out; - break; - - case UPIO_AU: - p->serial_in = au_serial_in; - p->serial_out = au_serial_out; - break; - - case UPIO_TSI: - p->serial_in = tsi_serial_in; - p->serial_out = tsi_serial_out; - break; - - case UPIO_DWAPB: - p->serial_in = mem_serial_in; - p->serial_out = dwapb_serial_out; - break; - - case UPIO_DWAPB32: - p->serial_in = mem32_serial_in; - p->serial_out = dwapb32_serial_out; - break; - - default: - p->serial_in = io_serial_in; - p->serial_out = io_serial_out; - break; - } - /* Remember loaded iotype */ - up->cur_iotype = p->iotype; -} - -static void -serial_out_sync(struct uart_8250_port *up, int offset, int value) -{ - struct uart_port *p = &up->port; - switch (p->iotype) { - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_DWAPB: - case UPIO_DWAPB32: - p->serial_out(p, offset, value); - p->serial_in(p, UART_LCR); /* safe, no side-effects */ - break; - default: - p->serial_out(p, offset, value); - } -} - -#define serial_in(up, offset) \ - (up->port.serial_in(&(up)->port, (offset))) -#define serial_out(up, offset, value) \ - (up->port.serial_out(&(up)->port, (offset), (value))) -/* - * We used to support using pause I/O for certain machines. We - * haven't supported this for a while, but just in case it's badly - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -#define serial_inp(up, offset) serial_in(up, offset) -#define serial_outp(up, offset, value) serial_out(up, offset, value) - -/* Uart divisor latch read */ -static inline int _serial_dl_read(struct uart_8250_port *up) -{ - return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; -} - -/* Uart divisor latch write */ -static inline void _serial_dl_write(struct uart_8250_port *up, int value) -{ - serial_outp(up, UART_DLL, value & 0xff); - serial_outp(up, UART_DLM, value >> 8 & 0xff); -} - -#if defined(CONFIG_MIPS_ALCHEMY) -/* Au1x00 haven't got a standard divisor latch */ -static int serial_dl_read(struct uart_8250_port *up) -{ - if (up->port.iotype == UPIO_AU) - return __raw_readl(up->port.membase + 0x28); - else - return _serial_dl_read(up); -} - -static void serial_dl_write(struct uart_8250_port *up, int value) -{ - if (up->port.iotype == UPIO_AU) - __raw_writel(value, up->port.membase + 0x28); - else - _serial_dl_write(up, value); -} -#elif defined(CONFIG_SERIAL_8250_RM9K) -static int serial_dl_read(struct uart_8250_port *up) -{ - return (up->port.iotype == UPIO_RM9000) ? - (((__raw_readl(up->port.membase + 0x10) << 8) | - (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : - _serial_dl_read(up); -} - -static void serial_dl_write(struct uart_8250_port *up, int value) -{ - if (up->port.iotype == UPIO_RM9000) { - __raw_writel(value, up->port.membase + 0x08); - __raw_writel(value >> 8, up->port.membase + 0x10); - } else { - _serial_dl_write(up, value); - } -} -#else -#define serial_dl_read(up) _serial_dl_read(up) -#define serial_dl_write(up, value) _serial_dl_write(up, value) -#endif - -/* - * For the 16C950 - */ -static void serial_icr_write(struct uart_8250_port *up, int offset, int value) -{ - serial_out(up, UART_SCR, offset); - serial_out(up, UART_ICR, value); -} - -static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) -{ - unsigned int value; - - serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); - serial_out(up, UART_SCR, offset); - value = serial_in(up, UART_ICR); - serial_icr_write(up, UART_ACR, up->acr); - - return value; -} - -/* - * FIFO support. - */ -static void serial8250_clear_fifos(struct uart_8250_port *p) -{ - if (p->capabilities & UART_CAP_FIFO) { - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(p, UART_FCR, 0); - } -} - -/* - * IER sleep support. UARTs which have EFRs need the "extended - * capability" bit enabled. Note that on XR16C850s, we need to - * reset LCR to write to IER. - */ -static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) -{ - if (p->capabilities & UART_CAP_SLEEP) { - if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, UART_EFR_ECB); - serial_outp(p, UART_LCR, 0); - } - serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); - if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, 0); - serial_outp(p, UART_LCR, 0); - } - } -} - -#ifdef CONFIG_SERIAL_8250_RSA -/* - * Attempts to turn on the RSA FIFO. Returns zero on failure. - * We set the port uart clock rate if we succeed. - */ -static int __enable_rsa(struct uart_8250_port *up) -{ - unsigned char mode; - int result; - - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; - - return result; -} - -static void enable_rsa(struct uart_8250_port *up) -{ - if (up->port.type == PORT_RSA) { - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - __enable_rsa(up); - spin_unlock_irq(&up->port.lock); - } - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_outp(up, UART_RSA_FRR, 0); - } -} - -/* - * Attempts to turn off the RSA FIFO. Returns zero on failure. - * It is unknown why interrupts were disabled in here. However, - * the caller is expected to preserve this behaviour by grabbing - * the spinlock before calling this function. - */ -static void disable_rsa(struct uart_8250_port *up) -{ - unsigned char mode; - int result; - - if (up->port.type == PORT_RSA && - up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; - spin_unlock_irq(&up->port.lock); - } -} -#endif /* CONFIG_SERIAL_8250_RSA */ - -/* - * This is a quickie test to see how big the FIFO is. - * It doesn't work at all the time, more's the pity. - */ -static int size_fifo(struct uart_8250_port *up) -{ - unsigned char old_fcr, old_mcr, old_lcr; - unsigned short old_dl; - int count; - - old_lcr = serial_inp(up, UART_LCR); - serial_outp(up, UART_LCR, 0); - old_fcr = serial_inp(up, UART_FCR); - old_mcr = serial_inp(up, UART_MCR); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_MCR, UART_MCR_LOOP); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - old_dl = serial_dl_read(up); - serial_dl_write(up, 0x0001); - serial_outp(up, UART_LCR, 0x03); - for (count = 0; count < 256; count++) - serial_outp(up, UART_TX, count); - mdelay(20);/* FIXME - schedule_timeout */ - for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && - (count < 256); count++) - serial_inp(up, UART_RX); - serial_outp(up, UART_FCR, old_fcr); - serial_outp(up, UART_MCR, old_mcr); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_dl_write(up, old_dl); - serial_outp(up, UART_LCR, old_lcr); - - return count; -} - -/* - * Read UART ID using the divisor method - set DLL and DLM to zero - * and the revision will be in DLL and device type in DLM. We - * preserve the device state across this. - */ -static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) -{ - unsigned char old_dll, old_dlm, old_lcr; - unsigned int id; - - old_lcr = serial_inp(p, UART_LCR); - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); - - old_dll = serial_inp(p, UART_DLL); - old_dlm = serial_inp(p, UART_DLM); - - serial_outp(p, UART_DLL, 0); - serial_outp(p, UART_DLM, 0); - - id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; - - serial_outp(p, UART_DLL, old_dll); - serial_outp(p, UART_DLM, old_dlm); - serial_outp(p, UART_LCR, old_lcr); - - return id; -} - -/* - * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. - * When this function is called we know it is at least a StarTech - * 16650 V2, but it might be one of several StarTech UARTs, or one of - * its clones. (We treat the broken original StarTech 16650 V1 as a - * 16550, and why not? Startech doesn't seem to even acknowledge its - * existence.) - * - * What evil have men's minds wrought... - */ -static void autoconfig_has_efr(struct uart_8250_port *up) -{ - unsigned int id1, id2, id3, rev; - - /* - * Everything with an EFR has SLEEP - */ - up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; - - /* - * First we check to see if it's an Oxford Semiconductor UART. - * - * If we have to do this here because some non-National - * Semiconductor clone chips lock up if you try writing to the - * LSR register (which serial_icr_read does) - */ - - /* - * Check for Oxford Semiconductor 16C950. - * - * EFR [4] must be set else this test fails. - * - * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) - * claims that it's needed for 952 dual UART's (which are not - * recommended for new designs). - */ - up->acr = 0; - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, UART_EFR_ECB); - serial_out(up, UART_LCR, 0x00); - id1 = serial_icr_read(up, UART_ID1); - id2 = serial_icr_read(up, UART_ID2); - id3 = serial_icr_read(up, UART_ID3); - rev = serial_icr_read(up, UART_REV); - - DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); - - if (id1 == 0x16 && id2 == 0xC9 && - (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { - up->port.type = PORT_16C950; - - /* - * Enable work around for the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates - * when DLL is 0. - */ - if (id3 == 0x52 && rev == 0x01) - up->bugs |= UART_BUG_QUOT; - return; - } - - /* - * We check for a XR16C850 by setting DLL and DLM to 0, and then - * reading back DLL and DLM. The chip type depends on the DLM - * value read back: - * 0x10 - XR16C850 and the DLL contains the chip revision. - * 0x12 - XR16C2850. - * 0x14 - XR16C854. - */ - id1 = autoconfig_read_divisor_id(up); - DEBUG_AUTOCONF("850id=%04x ", id1); - - id2 = id1 >> 8; - if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { - up->port.type = PORT_16850; - return; - } - - /* - * It wasn't an XR16C850. - * - * We distinguish between the '654 and the '650 by counting - * how many bytes are in the FIFO. I'm using this for now, - * since that's the technique that was sent to me in the - * serial driver update, but I'm not convinced this works. - * I've had problems doing this in the past. -TYT - */ - if (size_fifo(up) == 64) - up->port.type = PORT_16654; - else - up->port.type = PORT_16650V2; -} - -/* - * We detected a chip without a FIFO. Only two fall into - * this category - the original 8250 and the 16450. The - * 16450 has a scratch register (accessible with LCR=0) - */ -static void autoconfig_8250(struct uart_8250_port *up) -{ - unsigned char scratch, status1, status2; - - up->port.type = PORT_8250; - - scratch = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0xa5); - status1 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0x5a); - status2 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, scratch); - - if (status1 == 0xa5 && status2 == 0x5a) - up->port.type = PORT_16450; -} - -static int broken_efr(struct uart_8250_port *up) -{ - /* - * Exar ST16C2550 "A2" devices incorrectly detect as - * having an EFR, and report an ID of 0x0201. See - * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html - */ - if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) - return 1; - - return 0; -} - -/* - * We know that the chip has FIFOs. Does it have an EFR? The - * EFR is located in the same register position as the IIR and - * we know the top two bits of the IIR are currently set. The - * EFR should contain zero. Try to read the EFR. - */ -static void autoconfig_16550a(struct uart_8250_port *up) -{ - unsigned char status1, status2; - unsigned int iersave; - - up->port.type = PORT_16550A; - up->capabilities |= UART_CAP_FIFO; - - /* - * Check for presence of the EFR when DLAB is set. - * Only ST16C650V1 UARTs pass this test. - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - if (serial_in(up, UART_EFR) == 0) { - serial_outp(up, UART_EFR, 0xA8); - if (serial_in(up, UART_EFR) != 0) { - DEBUG_AUTOCONF("EFRv1 "); - up->port.type = PORT_16650; - up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; - } else { - DEBUG_AUTOCONF("Motorola 8xxx DUART "); - } - serial_outp(up, UART_EFR, 0); - return; - } - - /* - * Maybe it requires 0xbf to be written to the LCR. - * (other ST16C650V2 UARTs, TI16C752A, etc) - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { - DEBUG_AUTOCONF("EFRv2 "); - autoconfig_has_efr(up); - return; - } - - /* - * Check for a National Semiconductor SuperIO chip. - * Attempt to switch to bank 2, read the value of the LOOP bit - * from EXCR1. Switch back to bank 0, change it in MCR. Then - * switch back to bank 2, read it from EXCR1 again and check - * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 - */ - serial_outp(up, UART_LCR, 0); - status1 = serial_in(up, UART_MCR); - serial_outp(up, UART_LCR, 0xE0); - status2 = serial_in(up, 0x02); /* EXCR1 */ - - if (!((status2 ^ status1) & UART_MCR_LOOP)) { - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); - serial_outp(up, UART_LCR, 0xE0); - status2 = serial_in(up, 0x02); /* EXCR1 */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1); - - if ((status2 ^ status1) & UART_MCR_LOOP) { - unsigned short quot; - - serial_outp(up, UART_LCR, 0xE0); - - quot = serial_dl_read(up); - quot <<= 3; - - status1 = serial_in(up, 0x04); /* EXCR2 */ - status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status1); - - serial_dl_write(up, quot); - - serial_outp(up, UART_LCR, 0); - - up->port.uartclk = 921600*16; - up->port.type = PORT_NS16550A; - up->capabilities |= UART_NATSEMI; - return; - } - } - - /* - * No EFR. Try to detect a TI16750, which only sets bit 5 of - * the IIR when 64 byte FIFO mode is enabled when DLAB is set. - * Try setting it with and without DLAB set. Cheap clones - * set bit 5 without DLAB set. - */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - status1 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - status2 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, 0); - - DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); - - if (status1 == 6 && status2 == 7) { - up->port.type = PORT_16750; - up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; - return; - } - - /* - * Try writing and reading the UART_IER_UUE bit (b6). - * If it works, this is probably one of the Xscale platform's - * internal UARTs. - * We're going to explicitly set the UUE bit to 0 before - * trying to write and read a 1 just to make sure it's not - * already a 1 and maybe locked there before we even start start. - */ - iersave = serial_in(up, UART_IER); - serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); - if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { - /* - * OK it's in a known zero state, try writing and reading - * without disturbing the current state of the other bits. - */ - serial_outp(up, UART_IER, iersave | UART_IER_UUE); - if (serial_in(up, UART_IER) & UART_IER_UUE) { - /* - * It's an Xscale. - * We'll leave the UART_IER_UUE bit set to 1 (enabled). - */ - DEBUG_AUTOCONF("Xscale "); - up->port.type = PORT_XSCALE; - up->capabilities |= UART_CAP_UUE; - return; - } - } else { - /* - * If we got here we couldn't force the IER_UUE bit to 0. - * Log it and continue. - */ - DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); - } - serial_outp(up, UART_IER, iersave); - - /* - * We distinguish between 16550A and U6 16550A by counting - * how many bytes are in the FIFO. - */ - if (up->port.type == PORT_16550A && size_fifo(up) == 64) { - up->port.type = PORT_U6_16550A; - up->capabilities |= UART_CAP_AFE; - } -} - -/* - * This routine is called by rs_init() to initialize a specific serial - * port. It determines what type of UART chip this serial port is - * using: 8250, 16450, 16550, 16550A. The important question is - * whether or not this UART is a 16550A or not, since this will - * determine whether or not we can use its FIFO features or not. - */ -static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) -{ - unsigned char status1, scratch, scratch2, scratch3; - unsigned char save_lcr, save_mcr; - unsigned long flags; - - if (!up->port.iobase && !up->port.mapbase && !up->port.membase) - return; - - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", - serial_index(&up->port), up->port.iobase, up->port.membase); - - /* - * We really do need global IRQs disabled here - we're going to - * be frobbing the chips IRQ enable register to see if it exists. - */ - spin_lock_irqsave(&up->port.lock, flags); - - up->capabilities = 0; - up->bugs = 0; - - if (!(up->port.flags & UPF_BUGGY_UART)) { - /* - * Do a simple existence test first; if we fail this, - * there's no point trying anything else. - * - * 0x80 is used as a nonsense port to prevent against - * false positives due to ISA bus float. The - * assumption is that 0x80 is a non-existent port; - * which should be safe since include/asm/io.h also - * makes this assumption. - * - * Note: this is safe as long as MCR bit 4 is clear - * and the device is in "PC" mode. - */ - scratch = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0); -#ifdef __i386__ - outb(0xff, 0x080); -#endif - /* - * Mask out IER[7:4] bits for test as some UARTs (e.g. TL - * 16C754B) allow only to modify them if an EFR bit is set. - */ - scratch2 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, 0x0F); -#ifdef __i386__ - outb(0, 0x080); -#endif - scratch3 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, scratch); - if (scratch2 != 0 || scratch3 != 0x0F) { - /* - * We failed; there's nothing here - */ - DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", - scratch2, scratch3); - goto out; - } - } - - save_mcr = serial_in(up, UART_MCR); - save_lcr = serial_in(up, UART_LCR); - - /* - * Check to see if a UART is really there. Certain broken - * internal modems based on the Rockwell chipset fail this - * test, because they apparently don't implement the loopback - * test mode. So this test is skipped on the COM 1 through - * COM 4 ports. This *should* be safe, since no board - * manufacturer would be stupid enough to design a board - * that conflicts with COM 1-4 --- we hope! - */ - if (!(up->port.flags & UPF_SKIP_TEST)) { - serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); - status1 = serial_inp(up, UART_MSR) & 0xF0; - serial_outp(up, UART_MCR, save_mcr); - if (status1 != 0x90) { - DEBUG_AUTOCONF("LOOP test failed (%02x) ", - status1); - goto out; - } - } - - /* - * We're pretty sure there's a port here. Lets find out what - * type of port it is. The IIR top two bits allows us to find - * out if it's 8250 or 16450, 16550, 16550A or later. This - * determines what we test for next. - * - * We also initialise the EFR (if any) to zero for later. The - * EFR occupies the same register location as the FCR and IIR. - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, 0); - serial_outp(up, UART_LCR, 0); - - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - - DEBUG_AUTOCONF("iir=%d ", scratch); - - switch (scratch) { - case 0: - autoconfig_8250(up); - break; - case 1: - up->port.type = PORT_UNKNOWN; - break; - case 2: - up->port.type = PORT_16550; - break; - case 3: - autoconfig_16550a(up); - break; - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Only probe for RSA ports if we got the region. - */ - if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { - int i; - - for (i = 0 ; i < probe_rsa_count; ++i) { - if (probe_rsa[i] == up->port.iobase && - __enable_rsa(up)) { - up->port.type = PORT_RSA; - break; - } - } - } -#endif - - serial_outp(up, UART_LCR, save_lcr); - - if (up->capabilities != uart_config[up->port.type].flags) { - printk(KERN_WARNING - "ttyS%d: detected caps %08x should be %08x\n", - serial_index(&up->port), up->capabilities, - uart_config[up->port.type].flags); - } - - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->capabilities = uart_config[up->port.type].flags; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - - if (up->port.type == PORT_UNKNOWN) - goto out; - - /* - * Reset the UART. - */ -#ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) - serial_outp(up, UART_RSA_FRR, 0); -#endif - serial_outp(up, UART_MCR, save_mcr); - serial8250_clear_fifos(up); - serial_in(up, UART_RX); - if (up->capabilities & UART_CAP_UUE) - serial_outp(up, UART_IER, UART_IER_UUE); - else - serial_outp(up, UART_IER, 0); - - out: - spin_unlock_irqrestore(&up->port.lock, flags); - DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); -} - -static void autoconfig_irq(struct uart_8250_port *up) -{ - unsigned char save_mcr, save_ier; - unsigned char save_ICP = 0; - unsigned int ICP = 0; - unsigned long irqs; - int irq; - - if (up->port.flags & UPF_FOURPORT) { - ICP = (up->port.iobase & 0xfe0) | 0x1f; - save_ICP = inb_p(ICP); - outb_p(0x80, ICP); - (void) inb_p(ICP); - } - - /* forget possible initially masked and pending IRQ */ - probe_irq_off(probe_irq_on()); - save_mcr = serial_inp(up, UART_MCR); - save_ier = serial_inp(up, UART_IER); - serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); - - irqs = probe_irq_on(); - serial_outp(up, UART_MCR, 0); - udelay(10); - if (up->port.flags & UPF_FOURPORT) { - serial_outp(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS); - } else { - serial_outp(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); - } - serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ - (void)serial_inp(up, UART_LSR); - (void)serial_inp(up, UART_RX); - (void)serial_inp(up, UART_IIR); - (void)serial_inp(up, UART_MSR); - serial_outp(up, UART_TX, 0xFF); - udelay(20); - irq = probe_irq_off(irqs); - - serial_outp(up, UART_MCR, save_mcr); - serial_outp(up, UART_IER, save_ier); - - if (up->port.flags & UPF_FOURPORT) - outb_p(save_ICP, ICP); - - up->port.irq = (irq > 0) ? irq : 0; -} - -static inline void __stop_tx(struct uart_8250_port *p) -{ - if (p->ier & UART_IER_THRI) { - p->ier &= ~UART_IER_THRI; - serial_out(p, UART_IER, p->ier); - } -} - -static void serial8250_stop_tx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - __stop_tx(up); - - /* - * We really want to stop the transmitter from sending. - */ - if (up->port.type == PORT_16C950) { - up->acr |= UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void transmit_chars(struct uart_8250_port *up); - -static void serial8250_start_tx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - - if (up->bugs & UART_BUG_TXEN) { - unsigned char lsr; - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((up->port.type == PORT_RM9000) ? - (lsr & UART_LSR_THRE) : - (lsr & UART_LSR_TEMT)) - transmit_chars(up); - } - } - - /* - * Re-enable the transmitter if we disabled it. - */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { - up->acr &= ~UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void serial8250_stop_rx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void serial8250_enable_ms(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - /* no MSR capabilities */ - if (up->bugs & UART_BUG_NOMSR) - return; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void -receive_chars(struct uart_8250_port *up, unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch, lsr = *status; - int max_count = 256; - char flag; - - do { - if (likely(lsr & UART_LSR_DR)) - ch = serial_inp(up, UART_RX); - else - /* - * Intel 82571 has a Serial Over Lan device that will - * set UART_LSR_BI without setting UART_LSR_DR when - * it receives a break. To avoid reading from the - * receive buffer without UART_LSR_DR bit set, we - * just force the read character to be 0 - */ - ch = 0; - - flag = TTY_NORMAL; - up->port.icount.rx++; - - lsr |= up->lsr_saved_flags; - up->lsr_saved_flags = 0; - - if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (lsr & UART_LSR_PE) - up->port.icount.parity++; - else if (lsr & UART_LSR_FE) - up->port.icount.frame++; - if (lsr & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - lsr &= up->port.read_status_mask; - - if (lsr & UART_LSR_BI) { - DEBUG_INTR("handling break...."); - flag = TTY_BREAK; - } else if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - else if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); - -ignore_char: - lsr = serial_inp(up, UART_LSR); - } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); - *status = lsr; -} - -static void transmit_chars(struct uart_8250_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_outp(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_tx_stopped(&up->port)) { - serial8250_stop_tx(&up->port); - return; - } - if (uart_circ_empty(xmit)) { - __stop_tx(up); - return; - } - - count = up->tx_loadsz; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - DEBUG_INTR("THRE..."); - - if (uart_circ_empty(xmit)) - __stop_tx(up); -} - -static unsigned int check_modem_status(struct uart_8250_port *up) -{ - unsigned int status = serial_in(up, UART_MSR); - - status |= up->msr_saved_flags; - up->msr_saved_flags = 0; - if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - return status; -} - -/* - * This handles the interrupt from one port. - */ -static void serial8250_handle_port(struct uart_8250_port *up) -{ - unsigned int status; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - status = serial_inp(up, UART_LSR); - - DEBUG_INTR("status = %x...", status); - - if (status & (UART_LSR_DR | UART_LSR_BI)) - receive_chars(up, &status); - check_modem_status(up); - if (status & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t serial8250_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0, handled = 0; - - DEBUG_INTR("serial8250_interrupt(%d)...", irq); - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_8250_port *up; - unsigned int iir; - - up = list_entry(l, struct uart_8250_port, list); - - iir = serial_in(up, UART_IIR); - if (!(iir & UART_IIR_NO_INT)) { - serial8250_handle_port(up); - - handled = 1; - - end = NULL; - } else if ((up->port.iotype == UPIO_DWAPB || - up->port.iotype == UPIO_DWAPB32) && - (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { - /* The DesignWare APB UART has an Busy Detect (0x07) - * interrupt meaning an LCR write attempt occured while the - * UART was busy. The interrupt must be cleared by reading - * the UART status register (USR) and the LCR re-written. */ - unsigned int status; - status = *(volatile u32 *)up->port.private_data; - serial_out(up, UART_LCR, up->lcr); - - handled = 1; - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - /* If we hit this, we're dead. */ - printk_ratelimited(KERN_ERR - "serial8250: too much work for irq%d\n", irq); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - DEBUG_INTR("end.\n"); - - return IRQ_RETVAL(handled); -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - spin_unlock_irq(&i->lock); - /* List empty so throw away the hash node */ - if (i->head == NULL) { - hlist_del(&i->node); - kfree(i); - } -} - -static int serial_link_irq_chain(struct uart_8250_port *up) -{ - struct hlist_head *h; - struct hlist_node *n; - struct irq_info *i; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; - - mutex_lock(&hash_mutex); - - h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); - if (i->irq == up->port.irq) - break; - } - - if (n == NULL) { - i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); - if (i == NULL) { - mutex_unlock(&hash_mutex); - return -ENOMEM; - } - spin_lock_init(&i->lock); - i->irq = up->port.irq; - hlist_add_head(&i->node, h); - } - mutex_unlock(&hash_mutex); - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - irq_flags |= up->port.irqflags; - ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, "serial", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_8250_port *up) -{ - struct irq_info *i; - struct hlist_node *n; - struct hlist_head *h; - - mutex_lock(&hash_mutex); - - h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); - if (i->irq == up->port.irq) - break; - } - - BUG_ON(n == NULL); - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) - free_irq(up->port.irq, i); - - serial_do_unlink(i, up); - mutex_unlock(&hash_mutex); -} - -/* - * This function is used to handle ports that do not have an - * interrupt. This doesn't work very well for 16450's, but gives - * barely passable results for a 16550A. (Although at the expense - * of much CPU overhead). - */ -static void serial8250_timeout(unsigned long data) -{ - struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir; - - iir = serial_in(up, UART_IIR); - if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); - mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); -} - -static void serial8250_backup_timeout(unsigned long data) -{ - struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir, ier = 0, lsr; - unsigned long flags; - - /* - * Must disable interrupts or else we risk racing with the interrupt - * based handler. - */ - if (is_real_interrupt(up->port.irq)) { - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - } - - iir = serial_in(up, UART_IIR); - - /* - * This should be a safe test for anyone who doesn't trust the - * IIR bits on their UART, but it's specifically designed for - * the "Diva" UART used on the management processor on many HP - * ia64 and parisc boxes. - */ - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); - if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && - (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && - (lsr & UART_LSR_THRE)) { - iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); - iir |= UART_IIR_THRI; - } - - if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); - - if (is_real_interrupt(up->port.irq)) - serial_out(up, UART_IER, ier); - - /* Standard timer interval plus 0.2s to keep the port running */ - mod_timer(&up->timer, - jiffies + uart_poll_timeout(&up->port) + HZ / 5); -} - -static unsigned int serial8250_tx_empty(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - unsigned int lsr; - - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); - - return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; -} - -static unsigned int serial8250_get_mctrl(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned int status; - unsigned int ret; - - status = check_modem_status(up); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial8250_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_8250_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - for (;;) { - status = serial_in(up, UART_LSR); - - up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; - - if ((status & bits) == bits) - break; - if (--tmout == 0) - break; - udelay(1); - } - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - unsigned int tmout; - for (tmout = 1000000; tmout; tmout--) { - unsigned int msr = serial_in(up, UART_MSR); - up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; - if (msr & UART_MSR_CTS) - break; - udelay(1); - touch_nmi_watchdog(); - } - } -} - -#ifdef CONFIG_CONSOLE_POLL -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int serial8250_get_poll_char(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char lsr = serial_inp(up, UART_LSR); - - if (!(lsr & UART_LSR_DR)) - return NO_POLL_CHAR; - - return serial_inp(up, UART_RX); -} - - -static void serial8250_put_poll_char(struct uart_port *port, - unsigned char c) -{ - unsigned int ier; - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); - - wait_for_xmitr(up, BOTH_EMPTY); - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, c); - if (c == 10) { - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, 13); - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int serial8250_startup(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - unsigned char lsr, iir; - int retval; - - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - up->capabilities = uart_config[up->port.type].flags; - up->mcr = 0; - - if (up->port.iotype != up->cur_iotype) - set_io_from_upio(port); - - if (up->port.type == PORT_16C950) { - /* Wake up and initialize UART */ - up->acr = 0; - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_IER, 0); - serial_outp(up, UART_LCR, 0); - serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_LCR, 0); - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * If this is an RSA port, see if we can kick it up to the - * higher speed clock. - */ - enable_rsa(up); -#endif - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial8250_clear_fifos(up); - - /* - * Clear the interrupt registers. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - /* - * At this point, there's no way the LSR could still be 0xff; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (!(up->port.flags & UPF_BUGGY_UART) && - (serial_inp(up, UART_LSR) == 0xff)) { - printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", - serial_index(&up->port)); - return -ENODEV; - } - - /* - * For a XR16C850, we need to set the trigger levels - */ - if (up->port.type == PORT_16850) { - unsigned char fctr; - - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - - fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); - serial_outp(up, UART_TRG, UART_TRG_96); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); - serial_outp(up, UART_TRG, UART_TRG_96); - - serial_outp(up, UART_LCR, 0); - } - - if (is_real_interrupt(up->port.irq)) { - unsigned char iir1; - /* - * Test for UARTs that do not reassert THRE when the - * transmitter is idle and the interrupt has already - * been cleared. Real 16550s should always reassert - * this interrupt whenever the transmitter is idle and - * the interrupt is enabled. Delays are necessary to - * allow register changes to become visible. - */ - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(up->port.irq); - - wait_for_xmitr(up, UART_LSR_THRE); - serial_out_sync(up, UART_IER, UART_IER_THRI); - udelay(1); /* allow THRE to set */ - iir1 = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - serial_out_sync(up, UART_IER, UART_IER_THRI); - udelay(1); /* allow a working UART time to re-assert THRE */ - iir = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - - if (up->port.irqflags & IRQF_SHARED) - enable_irq(up->port.irq); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. - */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { - up->bugs |= UART_BUG_THRE; - pr_debug("ttyS%d - using backup timer\n", - serial_index(port)); - } - } - - /* - * The above check will only give an accurate result the first time - * the port is opened so this value needs to be preserved. - */ - if (up->bugs & UART_BUG_THRE) { - up->timer.function = serial8250_backup_timeout; - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + - uart_poll_timeout(port) + HZ / 5); - } - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!is_real_interrupt(up->port.irq)) { - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Now, initialize the UART - */ - serial_outp(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - if (!is_real_interrupt(up->port.irq)) - up->port.mctrl |= TIOCM_OUT1; - } else - /* - * Most PC uarts need OUT2 raised to enable interrupts. - */ - if (is_real_interrupt(up->port.irq)) - up->port.mctrl |= TIOCM_OUT2; - - serial8250_set_mctrl(&up->port, up->port.mctrl); - - /* Serial over Lan (SoL) hack: - Intel 8257x Gigabit ethernet chips have a - 16550 emulation, to be used for Serial Over Lan. - Those chips take a longer time than a normal - serial device to signalize that a transmission - data was queued. Due to that, the above test generally - fails. One solution would be to delay the reading of - iir. However, this is not reliable, since the timeout - is variable. So, let's just don't test if we receive - TX irq. This way, we'll never enable UART_BUG_TXEN. - */ - if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) - goto dont_test_tx_en; - - /* - * Do a quick test to see if we receive an - * interrupt when we enable the TX irq. - */ - serial_outp(up, UART_IER, UART_IER_THRI); - lsr = serial_in(up, UART_LSR); - iir = serial_in(up, UART_IIR); - serial_outp(up, UART_IER, 0); - - if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { - if (!(up->bugs & UART_BUG_TXEN)) { - up->bugs |= UART_BUG_TXEN; - pr_debug("ttyS%d - enabling bad tx status workarounds\n", - serial_index(port)); - } - } else { - up->bugs &= ~UART_BUG_TXEN; - } - -dont_test_tx_en: - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Clear the interrupt registers again for luck, and clear the - * saved flags to avoid getting false values from polling - * routines or the previous session. - */ - serial_inp(up, UART_LSR); - serial_inp(up, UART_RX); - serial_inp(up, UART_IIR); - serial_inp(up, UART_MSR); - up->lsr_saved_flags = 0; - up->msr_saved_flags = 0; - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_outp(up, UART_IER, up->ier); - - if (up->port.flags & UPF_FOURPORT) { - unsigned int icp; - /* - * Enable interrupts on the AST Fourport board - */ - icp = (up->port.iobase & 0xfe0) | 0x01f; - outb_p(0x80, icp); - (void) inb_p(icp); - } - - return 0; -} - -static void serial8250_shutdown(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_outp(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; - } else - up->port.mctrl &= ~TIOCM_OUT2; - - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); - serial8250_clear_fifos(up); - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Reset the RSA board back to 115kbps compat mode. - */ - disable_rsa(up); -#endif - - /* - * Read data port to reset things, and then unlink from - * the IRQ chain. - */ - (void) serial_in(up, UART_RX); - - del_timer_sync(&up->timer); - up->timer.function = serial8250_timeout; - if (is_real_interrupt(up->port.irq)) - serial_unlink_irq_chain(up); -} - -static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int quot; - - /* - * Handle magic divisors for baud rates above baud_base on - * SMSC SuperIO chips. - */ - if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/4)) - quot = 0x8001; - else if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/8)) - quot = 0x8002; - else - quot = uart_get_divisor(port, baud); - - return quot; -} - -void -serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / 0xffff, - port->uartclk / 16); - quot = serial8250_get_divisor(port, baud); - - /* - * Oxford Semi 952 rev B workaround - */ - if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) - quot++; - - if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { - if (baud < 2400) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; - else - fcr = uart_config[up->port.type].fcr; - } - - /* - * MCR-based auto flow control. When AFE is enabled, RTS will be - * deasserted when the receive FIFO contains more characters than - * the trigger, or the MCR RTS bit is cleared. In the case where - * the remote UART is not using CTS auto flow control, we must - * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. - */ - if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { - up->mcr &= ~UART_MCR_AFE; - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE; - } - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (!(up->bugs & UART_BUG_NOMSR) && - UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - if (up->capabilities & UART_CAP_UUE) - up->ier |= UART_IER_UUE | UART_IER_RTOIE; - - serial_out(up, UART_IER, up->ier); - - if (up->capabilities & UART_CAP_EFR) { - unsigned char efr = 0; - /* - * TI16C752/Startech hardware flow control. FIXME: - * - TI16C752 requires control thresholds to be set. - * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. - */ - if (termios->c_cflag & CRTSCTS) - efr |= UART_EFR_CTS; - - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, efr); - } - -#ifdef CONFIG_ARCH_OMAP - /* Workaround to enable 115200 baud on OMAP1510 internal ports */ - if (cpu_is_omap1510() && is_omap_port(up)) { - if (baud == 115200) { - quot = 1; - serial_out(up, UART_OMAP_OSC_12M_SEL, 1); - } else - serial_out(up, UART_OMAP_OSC_12M_SEL, 0); - } -#endif - - if (up->capabilities & UART_NATSEMI) { - /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ - serial_outp(up, UART_LCR, 0xe0); - } else { - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - } - - serial_dl_write(up, quot); - - /* - * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR - * is written without DLAB set, this mode will be disabled. - */ - if (up->port.type == PORT_16750) - serial_outp(up, UART_FCR, fcr); - - serial_outp(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { - if (fcr & UART_FCR_ENABLE_FIFO) { - /* emulated UARTs (Lucent Venus 167x) need two steps */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_FCR, fcr); /* set fcr */ - } - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - /* Don't rewrite B0 */ - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); -} -EXPORT_SYMBOL(serial8250_do_set_termios); - -static void -serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - if (port->set_termios) - port->set_termios(port, termios, old); - else - serial8250_do_set_termios(port, termios, old); -} - -static void -serial8250_set_ldisc(struct uart_port *port, int new) -{ - if (new == N_PPS) { - port->flags |= UPF_HARDPPS_CD; - serial8250_enable_ms(port); - } else - port->flags &= ~UPF_HARDPPS_CD; -} - - -void serial8250_do_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_8250_port *p = - container_of(port, struct uart_8250_port, port); - - serial8250_set_sleep(p, state != 0); -} -EXPORT_SYMBOL(serial8250_do_pm); - -static void -serial8250_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - if (port->pm) - port->pm(port, state, oldstate); - else - serial8250_do_pm(port, state, oldstate); -} - -static unsigned int serial8250_port_size(struct uart_8250_port *pt) -{ - if (pt->port.iotype == UPIO_AU) - return 0x1000; -#ifdef CONFIG_ARCH_OMAP - if (is_omap_port(pt)) - return 0x16 << pt->port.regshift; -#endif - return 8 << pt->port.regshift; -} - -/* - * Resource handling. - */ -static int serial8250_request_std_resource(struct uart_8250_port *up) -{ - unsigned int size = serial8250_port_size(up); - int ret = 0; - - switch (up->port.iotype) { - case UPIO_AU: - case UPIO_TSI: - case UPIO_MEM32: - case UPIO_MEM: - case UPIO_DWAPB: - case UPIO_DWAPB32: - if (!up->port.mapbase) - break; - - if (!request_mem_region(up->port.mapbase, size, "serial")) { - ret = -EBUSY; - break; - } - - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap_nocache(up->port.mapbase, - size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); - ret = -ENOMEM; - } - } - break; - - case UPIO_HUB6: - case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial")) - ret = -EBUSY; - break; - } - return ret; -} - -static void serial8250_release_std_resource(struct uart_8250_port *up) -{ - unsigned int size = serial8250_port_size(up); - - switch (up->port.iotype) { - case UPIO_AU: - case UPIO_TSI: - case UPIO_MEM32: - case UPIO_MEM: - case UPIO_DWAPB: - case UPIO_DWAPB32: - if (!up->port.mapbase) - break; - - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; - } - - release_mem_region(up->port.mapbase, size); - break; - - case UPIO_HUB6: - case UPIO_PORT: - release_region(up->port.iobase, size); - break; - } -} - -static int serial8250_request_rsa_resource(struct uart_8250_port *up) -{ - unsigned long start = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - int ret = -EINVAL; - - switch (up->port.iotype) { - case UPIO_HUB6: - case UPIO_PORT: - start += up->port.iobase; - if (request_region(start, size, "serial-rsa")) - ret = 0; - else - ret = -EBUSY; - break; - } - - return ret; -} - -static void serial8250_release_rsa_resource(struct uart_8250_port *up) -{ - unsigned long offset = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - case UPIO_PORT: - release_region(up->port.iobase + offset, size); - break; - } -} - -static void serial8250_release_port(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - serial8250_release_std_resource(up); - if (up->port.type == PORT_RSA) - serial8250_release_rsa_resource(up); -} - -static int serial8250_request_port(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - int ret = 0; - - ret = serial8250_request_std_resource(up); - if (ret == 0 && up->port.type == PORT_RSA) { - ret = serial8250_request_rsa_resource(up); - if (ret < 0) - serial8250_release_std_resource(up); - } - - return ret; -} - -static void serial8250_config_port(struct uart_port *port, int flags) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - int probeflags = PROBE_ANY; - int ret; - - /* - * Find the region that we can probe for. This in turn - * tells us whether we can probe for the type of port. - */ - ret = serial8250_request_std_resource(up); - if (ret < 0) - return; - - ret = serial8250_request_rsa_resource(up); - if (ret < 0) - probeflags &= ~PROBE_RSA; - - if (up->port.iotype != up->cur_iotype) - set_io_from_upio(port); - - if (flags & UART_CONFIG_TYPE) - autoconfig(up, probeflags); - - /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; - - if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) - autoconfig_irq(up); - - if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) - serial8250_release_rsa_resource(up); - if (up->port.type == PORT_UNKNOWN) - serial8250_release_std_resource(up); -} - -static int -serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || - ser->type == PORT_STARTECH) - return -EINVAL; - return 0; -} - -static const char * -serial8250_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops serial8250_pops = { - .tx_empty = serial8250_tx_empty, - .set_mctrl = serial8250_set_mctrl, - .get_mctrl = serial8250_get_mctrl, - .stop_tx = serial8250_stop_tx, - .start_tx = serial8250_start_tx, - .stop_rx = serial8250_stop_rx, - .enable_ms = serial8250_enable_ms, - .break_ctl = serial8250_break_ctl, - .startup = serial8250_startup, - .shutdown = serial8250_shutdown, - .set_termios = serial8250_set_termios, - .set_ldisc = serial8250_set_ldisc, - .pm = serial8250_pm, - .type = serial8250_type, - .release_port = serial8250_release_port, - .request_port = serial8250_request_port, - .config_port = serial8250_config_port, - .verify_port = serial8250_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = serial8250_get_poll_char, - .poll_put_char = serial8250_put_poll_char, -#endif -}; - -static struct uart_8250_port serial8250_ports[UART_NR]; - -static void (*serial8250_isa_config)(int port, struct uart_port *up, - unsigned short *capabilities); - -void serial8250_set_isa_configurator( - void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) -{ - serial8250_isa_config = v; -} -EXPORT_SYMBOL(serial8250_set_isa_configurator); - -static void __init serial8250_isa_init_ports(void) -{ - struct uart_8250_port *up; - static int first = 1; - int i, irqflag = 0; - - if (!first) - return; - first = 0; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - up->port.line = i; - spin_lock_init(&up->port.lock); - - init_timer(&up->timer); - up->timer.function = serial8250_timeout; - - /* - * ALPHA_KLUDGE_MCR needs to be killed. - */ - up->mcr_mask = ~ALPHA_KLUDGE_MCR; - up->mcr_force = ALPHA_KLUDGE_MCR; - - up->port.ops = &serial8250_pops; - } - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0, up = serial8250_ports; - i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.irqflags = old_serial_port[i].irqflags; - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.hub6 = old_serial_port[i].hub6; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - set_io_from_upio(&up->port); - up->port.irqflags |= irqflag; - if (serial8250_isa_config != NULL) - serial8250_isa_config(i, &up->port, &up->capabilities); - - } -} - -static void -serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) -{ - up->port.type = type; - up->port.fifosize = uart_config[type].fifo_size; - up->capabilities = uart_config[type].flags; - up->tx_loadsz = uart_config[type].tx_loadsz; -} - -static void __init -serial8250_register_ports(struct uart_driver *drv, struct device *dev) -{ - int i; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - up->cur_iotype = 0xFF; - } - - serial8250_isa_init_ports(); - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - up->port.dev = dev; - - if (up->port.flags & UPF_FIXED_TYPE) - serial8250_init_fixed_type_port(up, up->port.type); - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE - -static void serial8250_console_putchar(struct uart_port *port, int ch) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial8250_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_8250_port *up = &serial8250_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - touch_nmi_watchdog(); - - local_irq_save(flags); - if (up->port.sysrq) { - /* serial8250_handle_port() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial8250_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); - - /* - * The receive handling will happen properly because the - * receive ready bit will still be set; it is not cleared - * on read. However, modem control will not, we must - * call it if we have saved something in the saved flags - * while processing with interrupts off. - */ - if (up->msr_saved_flags) - check_modem_status(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init serial8250_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= nr_uarts) - co->index = 0; - port = &serial8250_ports[co->index].port; - if (!port->iobase && !port->membase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static int serial8250_console_early_setup(void) -{ - return serial8250_find_port_for_earlycon(); -} - -static struct console serial8250_console = { - .name = "ttyS", - .write = serial8250_console_write, - .device = uart_console_device, - .setup = serial8250_console_setup, - .early_setup = serial8250_console_early_setup, - .flags = CON_PRINTBUFFER | CON_ANYTIME, - .index = -1, - .data = &serial8250_reg, -}; - -static int __init serial8250_console_init(void) -{ - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; - - serial8250_isa_init_ports(); - register_console(&serial8250_console); - return 0; -} -console_initcall(serial8250_console_init); - -int serial8250_find_port(struct uart_port *p) -{ - int line; - struct uart_port *port; - - for (line = 0; line < nr_uarts; line++) { - port = &serial8250_ports[line].port; - if (uart_match_port(p, port)) - return line; - } - return -ENODEV; -} - -#define SERIAL8250_CONSOLE &serial8250_console -#else -#define SERIAL8250_CONSOLE NULL -#endif - -static struct uart_driver serial8250_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .cons = SERIAL8250_CONSOLE, -}; - -/* - * early_serial_setup - early registration for 8250 ports - * - * Setup an 8250 port structure prior to console initialisation. Use - * after console initialisation will cause undefined behaviour. - */ -int __init early_serial_setup(struct uart_port *port) -{ - struct uart_port *p; - - if (port->line >= ARRAY_SIZE(serial8250_ports)) - return -ENODEV; - - serial8250_isa_init_ports(); - p = &serial8250_ports[port->line].port; - p->iobase = port->iobase; - p->membase = port->membase; - p->irq = port->irq; - p->irqflags = port->irqflags; - p->uartclk = port->uartclk; - p->fifosize = port->fifosize; - p->regshift = port->regshift; - p->iotype = port->iotype; - p->flags = port->flags; - p->mapbase = port->mapbase; - p->private_data = port->private_data; - p->type = port->type; - p->line = port->line; - - set_io_from_upio(p); - if (port->serial_in) - p->serial_in = port->serial_in; - if (port->serial_out) - p->serial_out = port->serial_out; - - return 0; -} - -/** - * serial8250_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void serial8250_suspend_port(int line) -{ - uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); -} - -/** - * serial8250_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void serial8250_resume_port(int line) -{ - struct uart_8250_port *up = &serial8250_ports[line]; - - if (up->capabilities & UART_NATSEMI) { - unsigned char tmp; - - /* Ensure it's still in high speed mode */ - serial_outp(up, UART_LCR, 0xE0); - - tmp = serial_in(up, 0x04); /* EXCR2 */ - tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, tmp); - - serial_outp(up, UART_LCR, 0); - } - uart_resume_port(&serial8250_reg, &up->port); -} - -/* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. - */ -static int __devinit serial8250_probe(struct platform_device *dev) -{ - struct plat_serial8250_port *p = dev->dev.platform_data; - struct uart_port port; - int ret, i, irqflag = 0; - - memset(&port, 0, sizeof(struct uart_port)); - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0; p && p->flags != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.irqflags = p->irqflags; - port.uartclk = p->uartclk; - port.regshift = p->regshift; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.hub6 = p->hub6; - port.private_data = p->private_data; - port.type = p->type; - port.serial_in = p->serial_in; - port.serial_out = p->serial_out; - port.set_termios = p->set_termios; - port.pm = p->pm; - port.dev = &dev->dev; - port.irqflags |= irqflag; - ret = serial8250_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static int __devexit serial8250_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.dev == &dev->dev) - serial8250_unregister_port(i); - } - return 0; -} - -static int serial8250_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial8250_reg, &up->port); - } - - return 0; -} - -static int serial8250_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - serial8250_resume_port(i); - } - - return 0; -} - -static struct platform_driver serial8250_isa_driver = { - .probe = serial8250_probe, - .remove = __devexit_p(serial8250_remove), - .suspend = serial8250_suspend, - .resume = serial8250_resume, - .driver = { - .name = "serial8250", - .owner = THIS_MODULE, - }, -}; - -/* - * This "device" covers _all_ ISA 8250-compatible serial devices listed - * in the table in include/asm/serial.h - */ -static struct platform_device *serial8250_isa_devs; - -/* - * serial8250_register_port and serial8250_unregister_port allows for - * 16x50 serial ports to be configured at run-time, to support PCMCIA - * modems and PCI multiport cards. - */ -static DEFINE_MUTEX(serial_mutex); - -static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) -{ - int i; - - /* - * First, find a port entry which matches. - */ - for (i = 0; i < nr_uarts; i++) - if (uart_match_port(&serial8250_ports[i].port, port)) - return &serial8250_ports[i]; - - /* - * We didn't find a matching entry, so look for the first - * free entry. We look for one which hasn't been previously - * used (indicated by zero iobase). - */ - for (i = 0; i < nr_uarts; i++) - if (serial8250_ports[i].port.type == PORT_UNKNOWN && - serial8250_ports[i].port.iobase == 0) - return &serial8250_ports[i]; - - /* - * That also failed. Last resort is to find any entry which - * doesn't have a real port associated with it. - */ - for (i = 0; i < nr_uarts; i++) - if (serial8250_ports[i].port.type == PORT_UNKNOWN) - return &serial8250_ports[i]; - - return NULL; -} - -/** - * serial8250_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. If the - * port exists and is in use, it is hung up and unregistered - * first. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -int serial8250_register_port(struct uart_port *port) -{ - struct uart_8250_port *uart; - int ret = -ENOSPC; - - if (port->uartclk == 0) - return -EINVAL; - - mutex_lock(&serial_mutex); - - uart = serial8250_find_match_or_unused(port); - if (uart) { - uart_remove_one_port(&serial8250_reg, &uart->port); - - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.irqflags = port->irqflags; - uart->port.uartclk = port->uartclk; - uart->port.fifosize = port->fifosize; - uart->port.regshift = port->regshift; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; - uart->port.mapbase = port->mapbase; - uart->port.private_data = port->private_data; - if (port->dev) - uart->port.dev = port->dev; - - if (port->flags & UPF_FIXED_TYPE) - serial8250_init_fixed_type_port(uart, port->type); - - set_io_from_upio(&uart->port); - /* Possibly override default I/O functions. */ - if (port->serial_in) - uart->port.serial_in = port->serial_in; - if (port->serial_out) - uart->port.serial_out = port->serial_out; - /* Possibly override set_termios call */ - if (port->set_termios) - uart->port.set_termios = port->set_termios; - if (port->pm) - uart->port.pm = port->pm; - - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); - - ret = uart_add_one_port(&serial8250_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; - } - mutex_unlock(&serial_mutex); - - return ret; -} -EXPORT_SYMBOL(serial8250_register_port); - -/** - * serial8250_unregister_port - remove a 16x50 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to the our control. - */ -void serial8250_unregister_port(int line) -{ - struct uart_8250_port *uart = &serial8250_ports[line]; - - mutex_lock(&serial_mutex); - uart_remove_one_port(&serial8250_reg, &uart->port); - if (serial8250_isa_devs) { - uart->port.flags &= ~UPF_BOOT_AUTOCONF; - uart->port.type = PORT_UNKNOWN; - uart->port.dev = &serial8250_isa_devs->dev; - uart_add_one_port(&serial8250_reg, &uart->port); - } else { - uart->port.dev = NULL; - } - mutex_unlock(&serial_mutex); -} -EXPORT_SYMBOL(serial8250_unregister_port); - -static int __init serial8250_init(void) -{ - int ret; - - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; - - printk(KERN_INFO "Serial: 8250/16550 driver, " - "%d ports, IRQ sharing %sabled\n", nr_uarts, - share_irqs ? "en" : "dis"); - -#ifdef CONFIG_SPARC - ret = sunserial_register_minors(&serial8250_reg, UART_NR); -#else - serial8250_reg.nr = UART_NR; - ret = uart_register_driver(&serial8250_reg); -#endif - if (ret) - goto out; - - serial8250_isa_devs = platform_device_alloc("serial8250", - PLAT8250_DEV_LEGACY); - if (!serial8250_isa_devs) { - ret = -ENOMEM; - goto unreg_uart_drv; - } - - ret = platform_device_add(serial8250_isa_devs); - if (ret) - goto put_dev; - - serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); - - ret = platform_driver_register(&serial8250_isa_driver); - if (ret == 0) - goto out; - - platform_device_del(serial8250_isa_devs); -put_dev: - platform_device_put(serial8250_isa_devs); -unreg_uart_drv: -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -out: - return ret; -} - -static void __exit serial8250_exit(void) -{ - struct platform_device *isa_dev = serial8250_isa_devs; - - /* - * This tells serial8250_unregister_port() not to re-register - * the ports (thereby making serial8250_isa_driver permanently - * in use.) - */ - serial8250_isa_devs = NULL; - - platform_driver_unregister(&serial8250_isa_driver); - platform_device_unregister(isa_dev); - -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -} - -module_init(serial8250_init); -module_exit(serial8250_exit); - -EXPORT_SYMBOL(serial8250_suspend_port); -EXPORT_SYMBOL(serial8250_resume_port); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); - -module_param(share_irqs, uint, 0644); -MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" - " (unsafe)"); - -module_param(nr_uarts, uint, 0644); -MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); - -module_param(skip_txen_test, uint, 0644); -MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); - -#ifdef CONFIG_SERIAL_8250_RSA -module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); -MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); -#endif -MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h deleted file mode 100644 index 6e19ea3..0000000 --- a/drivers/serial/8250.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/drivers/char/8250.h - * - * Driver for 8250/16550-type serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include - -struct old_serial_port { - unsigned int uart; - unsigned int baud_base; - unsigned int port; - unsigned int irq; - unsigned int flags; - unsigned char hub6; - unsigned char io_type; - unsigned char *iomem_base; - unsigned short iomem_reg_shift; - unsigned long irqflags; -}; - -/* - * This replaces serial_uart_config in include/linux/serial.h - */ -struct serial8250_config { - const char *name; - unsigned short fifo_size; - unsigned short tx_loadsz; - unsigned char fcr; - unsigned int flags; -}; - -#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -#define UART_CAP_EFR (1 << 9) /* UART has EFR */ -#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ -#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ -#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ - -#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ -#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ -#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ -#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ - -#define PROBE_RSA (1 << 0) -#define PROBE_ANY (~0) - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) - -#ifdef CONFIG_SERIAL_8250_SHARE_IRQ -#define SERIAL8250_SHARE_IRQS 1 -#else -#define SERIAL8250_SHARE_IRQS 0 -#endif - -#if defined(__alpha__) && !defined(CONFIG_PCI) -/* - * Digital did something really horribly wrong with the OUT1 and OUT2 - * lines on at least some ALPHA's. The failure mode is that if either - * is cleared, the machine locks up with endless interrupts. - */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) -#elif defined(CONFIG_SBC8560) -/* - * WindRiver did something similarly broken on their SBC8560 board. The - * UART tristates its IRQ output while OUT2 is clear, but they pulled - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -#else -#define ALPHA_KLUDGE_MCR 0 -#endif diff --git a/drivers/serial/8250_accent.c b/drivers/serial/8250_accent.c deleted file mode 100644 index 9c10262..0000000 --- a/drivers/serial/8250_accent.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/drivers/serial/8250_accent.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port accent_data[] = { - PORT(0x330, 4), - PORT(0x338, 4), - { }, -}; - -static struct platform_device accent_device = { - .name = "serial8250", - .id = PLAT8250_DEV_ACCENT, - .dev = { - .platform_data = accent_data, - }, -}; - -static int __init accent_init(void) -{ - return platform_device_register(&accent_device); -} - -module_init(accent_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c deleted file mode 100644 index b0ce8c5..0000000 --- a/drivers/serial/8250_acorn.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * linux/drivers/serial/acorn.c - * - * Copyright (C) 1996-2003 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8250.h" - -#define MAX_PORTS 3 - -struct serial_card_type { - unsigned int num_ports; - unsigned int uartclk; - unsigned int type; - unsigned int offset[MAX_PORTS]; -}; - -struct serial_card_info { - unsigned int num_ports; - int ports[MAX_PORTS]; - void __iomem *vaddr; -}; - -static int __devinit -serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) -{ - struct serial_card_info *info; - struct serial_card_type *type = id->data; - struct uart_port port; - unsigned long bus_addr; - unsigned int i; - - info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->num_ports = type->num_ports; - - bus_addr = ecard_resource_start(ec, type->type); - info->vaddr = ecardm_iomap(ec, type->type, 0, 0); - if (!info->vaddr) { - kfree(info); - return -ENOMEM; - } - - ecard_set_drvdata(ec, info); - - memset(&port, 0, sizeof(struct uart_port)); - port.irq = ec->irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - port.uartclk = type->uartclk; - port.iotype = UPIO_MEM; - port.regshift = 2; - port.dev = &ec->dev; - - for (i = 0; i < info->num_ports; i ++) { - port.membase = info->vaddr + type->offset[i]; - port.mapbase = bus_addr + type->offset[i]; - - info->ports[i] = serial8250_register_port(&port); - } - - return 0; -} - -static void __devexit serial_card_remove(struct expansion_card *ec) -{ - struct serial_card_info *info = ecard_get_drvdata(ec); - int i; - - ecard_set_drvdata(ec, NULL); - - for (i = 0; i < info->num_ports; i++) - if (info->ports[i] > 0) - serial8250_unregister_port(info->ports[i]); - - kfree(info); -} - -static struct serial_card_type atomwide_type = { - .num_ports = 3, - .uartclk = 7372800, - .type = ECARD_RES_IOCSLOW, - .offset = { 0x2800, 0x2400, 0x2000 }, -}; - -static struct serial_card_type serport_type = { - .num_ports = 2, - .uartclk = 3686400, - .type = ECARD_RES_IOCSLOW, - .offset = { 0x2000, 0x2020 }, -}; - -static const struct ecard_id serial_cids[] = { - { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, - { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, - { 0xffff, 0xffff } -}; - -static struct ecard_driver serial_card_driver = { - .probe = serial_card_probe, - .remove = __devexit_p(serial_card_remove), - .id_table = serial_cids, - .drv = { - .name = "8250_acorn", - }, -}; - -static int __init serial_card_init(void) -{ - return ecard_register_driver(&serial_card_driver); -} - -static void __exit serial_card_exit(void) -{ - ecard_remove_driver(&serial_card_driver); -} - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); -MODULE_LICENSE("GPL"); - -module_init(serial_card_init); -module_exit(serial_card_exit); diff --git a/drivers/serial/8250_boca.c b/drivers/serial/8250_boca.c deleted file mode 100644 index 3bfe0f7..0000000 --- a/drivers/serial/8250_boca.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * linux/drivers/serial/8250_boca.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port boca_data[] = { - PORT(0x100, 12), - PORT(0x108, 12), - PORT(0x110, 12), - PORT(0x118, 12), - PORT(0x120, 12), - PORT(0x128, 12), - PORT(0x130, 12), - PORT(0x138, 12), - PORT(0x140, 12), - PORT(0x148, 12), - PORT(0x150, 12), - PORT(0x158, 12), - PORT(0x160, 12), - PORT(0x168, 12), - PORT(0x170, 12), - PORT(0x178, 12), - { }, -}; - -static struct platform_device boca_device = { - .name = "serial8250", - .id = PLAT8250_DEV_BOCA, - .dev = { - .platform_data = boca_data, - }, -}; - -static int __init boca_init(void) -{ - return platform_device_register(&boca_device); -} - -module_init(boca_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c deleted file mode 100644 index eaafb98..0000000 --- a/drivers/serial/8250_early.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Early serial console for 8250/16550 devices - * - * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. - * Bjorn Helgaas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, - * and on early_printk.c by Andi Kleen. - * - * This is for use before the serial driver has initialized, in - * particular, before the UARTs have been discovered and named. - * Instead of specifying the console device as, e.g., "ttyS0", - * we locate the device directly by its MMIO or I/O port address. - * - * The user can specify the device directly, e.g., - * earlycon=uart8250,io,0x3f8,9600n8 - * earlycon=uart8250,mmio,0xff5e0000,115200n8 - * earlycon=uart8250,mmio32,0xff5e0000,115200n8 - * or - * console=uart8250,io,0x3f8,9600n8 - * console=uart8250,mmio,0xff5e0000,115200n8 - * console=uart8250,mmio32,0xff5e0000,115200n8 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_FIX_EARLYCON_MEM -#include -#include -#endif - -struct early_serial8250_device { - struct uart_port port; - char options[16]; /* e.g., 115200n8 */ - unsigned int baud; -}; - -static struct early_serial8250_device early_device; - -static unsigned int __init serial_in(struct uart_port *port, int offset) -{ - switch (port->iotype) { - case UPIO_MEM: - return readb(port->membase + offset); - case UPIO_MEM32: - return readl(port->membase + (offset << 2)); - case UPIO_PORT: - return inb(port->iobase + offset); - default: - return 0; - } -} - -static void __init serial_out(struct uart_port *port, int offset, int value) -{ - switch (port->iotype) { - case UPIO_MEM: - writeb(value, port->membase + offset); - break; - case UPIO_MEM32: - writel(value, port->membase + (offset << 2)); - break; - case UPIO_PORT: - outb(value, port->iobase + offset); - break; - } -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void __init wait_for_xmitr(struct uart_port *port) -{ - unsigned int status; - - for (;;) { - status = serial_in(port, UART_LSR); - if ((status & BOTH_EMPTY) == BOTH_EMPTY) - return; - cpu_relax(); - } -} - -static void __init serial_putc(struct uart_port *port, int c) -{ - wait_for_xmitr(port); - serial_out(port, UART_TX, c); -} - -static void __init early_serial8250_write(struct console *console, - const char *s, unsigned int count) -{ - struct uart_port *port = &early_device.port; - unsigned int ier; - - /* Save the IER and disable interrupts */ - ier = serial_in(port, UART_IER); - serial_out(port, UART_IER, 0); - - uart_console_write(port, s, count, serial_putc); - - /* Wait for transmitter to become empty and restore the IER */ - wait_for_xmitr(port); - serial_out(port, UART_IER, ier); -} - -static unsigned int __init probe_baud(struct uart_port *port) -{ - unsigned char lcr, dll, dlm; - unsigned int quot; - - lcr = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); - dll = serial_in(port, UART_DLL); - dlm = serial_in(port, UART_DLM); - serial_out(port, UART_LCR, lcr); - - quot = (dlm << 8) | dll; - return (port->uartclk / 16) / quot; -} - -static void __init init_port(struct early_serial8250_device *device) -{ - struct uart_port *port = &device->port; - unsigned int divisor; - unsigned char c; - - serial_out(port, UART_LCR, 0x3); /* 8n1 */ - serial_out(port, UART_IER, 0); /* no interrupt */ - serial_out(port, UART_FCR, 0); /* no fifo */ - serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ - - divisor = port->uartclk / (16 * device->baud); - c = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, c | UART_LCR_DLAB); - serial_out(port, UART_DLL, divisor & 0xff); - serial_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); -} - -static int __init parse_options(struct early_serial8250_device *device, - char *options) -{ - struct uart_port *port = &device->port; - int mmio, mmio32, length; - - if (!options) - return -ENODEV; - - port->uartclk = BASE_BAUD * 16; - - mmio = !strncmp(options, "mmio,", 5); - mmio32 = !strncmp(options, "mmio32,", 7); - if (mmio || mmio32) { - port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); - port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), - &options, 0); - if (mmio32) - port->regshift = 2; -#ifdef CONFIG_FIX_EARLYCON_MEM - set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, - port->mapbase & PAGE_MASK); - port->membase = - (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); - port->membase += port->mapbase & ~PAGE_MASK; -#else - port->membase = ioremap_nocache(port->mapbase, 64); - if (!port->membase) { - printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __func__, - (unsigned long long) port->mapbase); - return -ENOMEM; - } -#endif - } else if (!strncmp(options, "io,", 3)) { - port->iotype = UPIO_PORT; - port->iobase = simple_strtoul(options + 3, &options, 0); - mmio = 0; - } else - return -EINVAL; - - options = strchr(options, ','); - if (options) { - options++; - device->baud = simple_strtoul(options, NULL, 0); - length = min(strcspn(options, " "), sizeof(device->options)); - strncpy(device->options, options, length); - } else { - device->baud = probe_baud(port); - snprintf(device->options, sizeof(device->options), "%u", - device->baud); - } - - if (mmio || mmio32) - printk(KERN_INFO - "Early serial console at MMIO%s 0x%llx (options '%s')\n", - mmio32 ? "32" : "", - (unsigned long long)port->mapbase, - device->options); - else - printk(KERN_INFO - "Early serial console at I/O port 0x%lx (options '%s')\n", - port->iobase, - device->options); - - return 0; -} - -static struct console early_serial8250_console __initdata = { - .name = "uart", - .write = early_serial8250_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static int __init early_serial8250_setup(char *options) -{ - struct early_serial8250_device *device = &early_device; - int err; - - if (device->port.membase || device->port.iobase) - return 0; - - err = parse_options(device, options); - if (err < 0) - return err; - - init_port(device); - return 0; -} - -int __init setup_early_serial8250_console(char *cmdline) -{ - char *options; - int err; - - options = strstr(cmdline, "uart8250,"); - if (!options) { - options = strstr(cmdline, "uart,"); - if (!options) - return 0; - } - - options = strchr(cmdline, ',') + 1; - err = early_serial8250_setup(options); - if (err < 0) - return err; - - register_console(&early_serial8250_console); - - return 0; -} - -int serial8250_find_port_for_earlycon(void) -{ - struct early_serial8250_device *device = &early_device; - struct uart_port *port = &device->port; - int line; - int ret; - - if (!device->port.membase && !device->port.iobase) - return -ENODEV; - - line = serial8250_find_port(port); - if (line < 0) - return -ENODEV; - - ret = update_console_cmdline("uart", 8250, - "ttyS", line, device->options); - if (ret < 0) - ret = update_console_cmdline("uart", 0, - "ttyS", line, device->options); - - return ret; -} - -early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/serial/8250_exar_st16c554.c b/drivers/serial/8250_exar_st16c554.c deleted file mode 100644 index 567143a..0000000 --- a/drivers/serial/8250_exar_st16c554.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/drivers/serial/8250_exar.c - * - * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > - * Based on 8250_boca. - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port exar_data[] = { - PORT(0x100, 5), - PORT(0x108, 5), - PORT(0x110, 5), - PORT(0x118, 5), - { }, -}; - -static struct platform_device exar_device = { - .name = "serial8250", - .id = PLAT8250_DEV_EXAR_ST16C554, - .dev = { - .platform_data = exar_data, - }, -}; - -static int __init exar_init(void) -{ - return platform_device_register(&exar_device); -} - -module_init(exar_init); - -MODULE_AUTHOR("Paul B Schroeder"); -MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_fourport.c b/drivers/serial/8250_fourport.c deleted file mode 100644 index 6375d68..0000000 --- a/drivers/serial/8250_fourport.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/drivers/serial/8250_fourport.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ - } - -static struct plat_serial8250_port fourport_data[] = { - PORT(0x1a0, 9), - PORT(0x1a8, 9), - PORT(0x1b0, 9), - PORT(0x1b8, 9), - PORT(0x2a0, 5), - PORT(0x2a8, 5), - PORT(0x2b0, 5), - PORT(0x2b8, 5), - { }, -}; - -static struct platform_device fourport_device = { - .name = "serial8250", - .id = PLAT8250_DEV_FOURPORT, - .dev = { - .platform_data = fourport_data, - }, -}; - -static int __init fourport_init(void) -{ - return platform_device_register(&fourport_device); -} - -module_init(fourport_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c deleted file mode 100644 index d8c0ffb..0000000 --- a/drivers/serial/8250_gsc.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Serial Device Initialisation for Lasi/Asp/Wax/Dino - * - * (c) Copyright Matthew Wilcox 2001-2002 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8250.h" - -static int __init serial_init_chip(struct parisc_device *dev) -{ - struct uart_port port; - unsigned long address; - int err; - - if (!dev->irq) { - /* We find some unattached serial ports by walking native - * busses. These should be silently ignored. Otherwise, - * what we have here is a missing parent device, so tell - * the user what they're missing. - */ - if (parisc_parent(dev)->id.hw_type != HPHW_IOA) - printk(KERN_INFO - "Serial: device 0x%llx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", - (unsigned long long)dev->hpa.start); - return -ENODEV; - } - - address = dev->hpa.start; - if (dev->id.sversion != 0x8d) - address += 0x800; - - memset(&port, 0, sizeof(port)); - port.iotype = UPIO_MEM; - /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - port.uartclk = 7272727; - port.mapbase = address; - port.membase = ioremap_nocache(address, 16); - port.irq = dev->irq; - port.flags = UPF_BOOT_AUTOCONF; - port.dev = &dev->dev; - - err = serial8250_register_port(&port); - if (err < 0) { - printk(KERN_WARNING - "serial8250_register_port returned error %d\n", err); - iounmap(port.membase); - return err; - } - - return 0; -} - -static struct parisc_device_id serial_tbl[] = { - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, - { 0 } -}; - -/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 - * attached to Dino. Unfortunately, Dino appears before Lasi in the device - * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one - * which only knows about Lasi and then a second which will find all the - * other serial ports. HPUX ignores this problem. - */ -static struct parisc_device_id lasi_tbl[] = { - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ - { 0 } -}; - - -MODULE_DEVICE_TABLE(parisc, serial_tbl); - -static struct parisc_driver lasi_driver = { - .name = "serial_1", - .id_table = lasi_tbl, - .probe = serial_init_chip, -}; - -static struct parisc_driver serial_driver = { - .name = "serial", - .id_table = serial_tbl, - .probe = serial_init_chip, -}; - -static int __init probe_serial_gsc(void) -{ - register_parisc_driver(&lasi_driver); - register_parisc_driver(&serial_driver); - return 0; -} - -module_init(probe_serial_gsc); - -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c deleted file mode 100644 index c13438c..0000000 --- a/drivers/serial/8250_hp300.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * Driver for the 98626/98644/internal serial interface on hp300/hp400 - * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) - * - * Ported from 2.2 and modified to use the normal 8250 driver - * by Kars de Jong , May 2004. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "8250.h" - -#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) -#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? -#endif - -#ifdef CONFIG_HPAPCI -struct hp300_port -{ - struct hp300_port *next; /* next port */ - int line; /* line (tty) number */ -}; - -static struct hp300_port *hp300_ports; -#endif - -#ifdef CONFIG_HPDCA - -static int __devinit hpdca_init_one(struct dio_dev *d, - const struct dio_device_id *ent); -static void __devexit hpdca_remove_one(struct dio_dev *d); - -static struct dio_device_id hpdca_dio_tbl[] = { - { DIO_ID_DCA0 }, - { DIO_ID_DCA0REM }, - { DIO_ID_DCA1 }, - { DIO_ID_DCA1REM }, - { 0 } -}; - -static struct dio_driver hpdca_driver = { - .name = "hpdca", - .id_table = hpdca_dio_tbl, - .probe = hpdca_init_one, - .remove = __devexit_p(hpdca_remove_one), -}; - -#endif - -static unsigned int num_ports; - -extern int hp300_uart_scode; - -/* Offset to UART registers from base of DCA */ -#define UART_OFFSET 17 - -#define DCA_ID 0x01 /* ID (read), reset (write) */ -#define DCA_IC 0x03 /* Interrupt control */ - -/* Interrupt control */ -#define DCA_IC_IE 0x80 /* Master interrupt enable */ - -#define HPDCA_BAUD_BASE 153600 - -/* Base address of the Frodo part */ -#define FRODO_BASE (0x41c000) - -/* - * Where we find the 8250-like APCI ports, and how far apart they are. - */ -#define FRODO_APCIBASE 0x0 -#define FRODO_APCISPACE 0x20 -#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) - -#define HPAPCI_BAUD_BASE 500400 - -#ifdef CONFIG_SERIAL_8250_CONSOLE -/* - * Parse the bootinfo to find descriptions for headless console and - * debug serial ports and register them with the 8250 driver. - * This function should be called before serial_console_init() is called - * to make sure the serial console will be available for use. IA-64 kernel - * calls this function from setup_arch() after the EFI and ACPI tables have - * been parsed. - */ -int __init hp300_setup_serial_console(void) -{ - int scode; - struct uart_port port; - - memset(&port, 0, sizeof(port)); - - if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) - return 0; - - if (DIO_SCINHOLE(hp300_uart_scode)) - return 0; - - scode = hp300_uart_scode; - - /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.type = PORT_UNKNOWN; - - /* Check for APCI console */ - if (scode == 256) { -#ifdef CONFIG_HPAPCI - printk(KERN_INFO "Serial console is HP APCI 1\n"); - - port.uartclk = HPAPCI_BAUD_BASE * 16; - port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 2; - add_preferred_console("ttyS", port.line, "9600n8"); -#else - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); - return 0; -#endif - } else { -#ifdef CONFIG_HPDCA - unsigned long pa = dio_scodetophysaddr(scode); - if (!pa) - return 0; - - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); - - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (pa + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); - - /* Enable board-interrupts */ - out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); - - if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) - add_preferred_console("ttyS", port.line, "9600n8"); -#else - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); - return 0; -#endif - } - - if (early_serial_setup(&port) < 0) - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); - return 0; -} -#endif /* CONFIG_SERIAL_8250_CONSOLE */ - -#ifdef CONFIG_HPDCA -static int __devinit hpdca_init_one(struct dio_dev *d, - const struct dio_device_id *ent) -{ - struct uart_port port; - int line; - -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (hp300_uart_scode == d->scode) { - /* Already got it. */ - return 0; - } -#endif - memset(&port, 0, sizeof(struct uart_port)); - - /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.irq = d->ipl; - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (d->resource.start + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.dev = &d->dev; - line = serial8250_register_port(&port); - - if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, port.irq); - return -ENOMEM; - } - - /* Enable board-interrupts */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); - dio_set_drvdata(d, (void *)line); - - /* Reset the DCA */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); - udelay(100); - - num_ports++; - - return 0; -} -#endif - -static int __init hp300_8250_init(void) -{ - static int called; -#ifdef CONFIG_HPAPCI - int line; - unsigned long base; - struct uart_port uport; - struct hp300_port *port; - int i; -#endif - if (called) - return -ENODEV; - called = 1; - - if (!MACH_IS_HP300) - return -ENODEV; - -#ifdef CONFIG_HPDCA - dio_register_driver(&hpdca_driver); -#endif -#ifdef CONFIG_HPAPCI - if (hp300_model < HP_400) { - if (!num_ports) - return -ENODEV; - return 0; - } - /* These models have the Frodo chip. - * Port 0 is reserved for the Apollo Domain keyboard. - * Port 1 is either the console or the DCA. - */ - for (i = 1; i < 4; i++) { - /* Port 1 is the console on a 425e, on other machines it's - * mapped to DCA. - */ -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (i == 1) - continue; -#endif - - /* Create new serial device */ - port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); - if (!port) - return -ENOMEM; - - memset(&uport, 0, sizeof(struct uart_port)); - - base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); - - /* Memory mapped I/O */ - uport.iotype = UPIO_MEM; - uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ - | UPF_BOOT_AUTOCONF; - /* XXX - no interrupt support yet */ - uport.irq = 0; - uport.uartclk = HPAPCI_BAUD_BASE * 16; - uport.mapbase = base; - uport.membase = (char *)(base + DIO_VIRADDRBASE); - uport.regshift = 2; - - line = serial8250_register_port(&uport); - - if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() APCI" - " %d irq %d failed\n", i, uport.irq); - kfree(port); - continue; - } - - port->line = line; - port->next = hp300_ports; - hp300_ports = port; - - num_ports++; - } -#endif - - /* Any boards found? */ - if (!num_ports) - return -ENODEV; - - return 0; -} - -#ifdef CONFIG_HPDCA -static void __devexit hpdca_remove_one(struct dio_dev *d) -{ - int line; - - line = (int) dio_get_drvdata(d); - if (d->resource.start) { - /* Disable board-interrupts */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); - } - serial8250_unregister_port(line); -} -#endif - -static void __exit hp300_8250_exit(void) -{ -#ifdef CONFIG_HPAPCI - struct hp300_port *port, *to_free; - - for (port = hp300_ports; port; ) { - serial8250_unregister_port(port->line); - to_free = port; - port = port->next; - kfree(to_free); - } - - hp300_ports = NULL; -#endif -#ifdef CONFIG_HPDCA - dio_unregister_driver(&hpdca_driver); -#endif -} - -module_init(hp300_8250_init); -module_exit(hp300_8250_exit); -MODULE_DESCRIPTION("HP DCA/APCI serial driver"); -MODULE_AUTHOR("Kars de Jong "); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_hub6.c b/drivers/serial/8250_hub6.c deleted file mode 100644 index 7609150..0000000 --- a/drivers/serial/8250_hub6.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/drivers/serial/8250_hub6.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define HUB6(card,port) \ - { \ - .iobase = 0x302, \ - .irq = 3, \ - .uartclk = 1843200, \ - .iotype = UPIO_HUB6, \ - .flags = UPF_BOOT_AUTOCONF, \ - .hub6 = (card) << 6 | (port) << 3 | 1, \ - } - -static struct plat_serial8250_port hub6_data[] = { - HUB6(0, 0), - HUB6(0, 1), - HUB6(0, 2), - HUB6(0, 3), - HUB6(0, 4), - HUB6(0, 5), - HUB6(1, 0), - HUB6(1, 1), - HUB6(1, 2), - HUB6(1, 3), - HUB6(1, 4), - HUB6(1, 5), - { }, -}; - -static struct platform_device hub6_device = { - .name = "serial8250", - .id = PLAT8250_DEV_HUB6, - .dev = { - .platform_data = hub6_data, - }, -}; - -static int __init hub6_init(void) -{ - return platform_device_register(&hub6_device); -} - -module_init(hub6_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_mca.c b/drivers/serial/8250_mca.c deleted file mode 100644 index d10be94..0000000 --- a/drivers/serial/8250_mca.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/drivers/serial/8250_mca.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include - -/* - * FIXME: Should we be doing AUTO_IRQ here? - */ -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ -#else -#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST -#endif - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = MCA_FLAGS, \ - } - -static struct plat_serial8250_port mca_data[] = { - PORT(0x3220, 3), - PORT(0x3228, 3), - PORT(0x4220, 3), - PORT(0x4228, 3), - PORT(0x5220, 3), - PORT(0x5228, 3), - { }, -}; - -static struct platform_device mca_device = { - .name = "serial8250", - .id = PLAT8250_DEV_MCA, - .dev = { - .platform_data = mca_data, - }, -}; - -static int __init mca_init(void) -{ - if (!MCA_bus) - return -ENODEV; - return platform_device_register(&mca_device); -} - -module_init(mca_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for MCA ports"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c deleted file mode 100644 index 8b8930f..0000000 --- a/drivers/serial/8250_pci.c +++ /dev/null @@ -1,3850 +0,0 @@ -/* - * linux/drivers/char/8250_pci.c - * - * Probe module for 8250/16550-type PCI serial ports. - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "8250.h" - -#undef SERIAL_DEBUG_PCI - -/* - * init function returns: - * > 0 - number of ports - * = 0 - use board->num_ports - * < 0 - error - */ -struct pci_serial_quirk { - u32 vendor; - u32 device; - u32 subvendor; - u32 subdevice; - int (*init)(struct pci_dev *dev); - int (*setup)(struct serial_private *, - const struct pciserial_board *, - struct uart_port *, int); - void (*exit)(struct pci_dev *dev); -}; - -#define PCI_NUM_BAR_RESOURCES 6 - -struct serial_private { - struct pci_dev *dev; - unsigned int nr; - void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; - struct pci_serial_quirk *quirk; - int line[0]; -}; - -static void moan_device(const char *str, struct pci_dev *dev) -{ - printk(KERN_WARNING - "%s: %s\n" - "Please send the output of lspci -vv, this\n" - "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" - "manufacturer and name of serial board or\n" - "modem board to rmk+serial@arm.linux.org.uk.\n", - pci_name(dev), str, dev->vendor, dev->device, - dev->subsystem_vendor, dev->subsystem_device); -} - -static int -setup_port(struct serial_private *priv, struct uart_port *port, - int bar, int offset, int regshift) -{ - struct pci_dev *dev = priv->dev; - unsigned long base, len; - - if (bar >= PCI_NUM_BAR_RESOURCES) - return -EINVAL; - - base = pci_resource_start(dev, bar); - - if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { - len = pci_resource_len(dev, bar); - - if (!priv->remapped_bar[bar]) - priv->remapped_bar[bar] = ioremap_nocache(base, len); - if (!priv->remapped_bar[bar]) - return -ENOMEM; - - port->iotype = UPIO_MEM; - port->iobase = 0; - port->mapbase = base + offset; - port->membase = priv->remapped_bar[bar] + offset; - port->regshift = regshift; - } else { - port->iotype = UPIO_PORT; - port->iobase = base + offset; - port->mapbase = 0; - port->membase = NULL; - port->regshift = 0; - } - return 0; -} - -/* - * ADDI-DATA GmbH communication cards - */ -static int addidata_apci7800_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = 0, offset = board->first_offset; - bar = FL_GET_BASE(board->flags); - - if (idx < 2) { - offset += idx * board->uart_offset; - } else if ((idx >= 2) && (idx < 4)) { - bar += 1; - offset += ((idx - 2) * board->uart_offset); - } else if ((idx >= 4) && (idx < 6)) { - bar += 2; - offset += ((idx - 4) * board->uart_offset); - } else if (idx >= 6) { - bar += 3; - offset += ((idx - 6) * board->uart_offset); - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * AFAVLAB uses a different mixture of BARs and offsets - * Not that ugly ;) -- HW - */ -static int -afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - bar = FL_GET_BASE(board->flags); - if (idx < 4) - bar += idx; - else { - bar = 4; - offset += (idx - 4) * board->uart_offset; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * HP's Remote Management Console. The Diva chip came in several - * different versions. N-class, L2000 and A500 have two Diva chips, each - * with 3 UARTs (the third UART on the second chip is unused). Superdome - * and Keystone have one Diva chip with 3 UARTs. Some later machines have - * one Diva chip, but it has been expanded to 5 UARTs. - */ -static int pci_hp_diva_init(struct pci_dev *dev) -{ - int rc = 0; - - switch (dev->subsystem_device) { - case PCI_DEVICE_ID_HP_DIVA_TOSCA1: - case PCI_DEVICE_ID_HP_DIVA_HALFDOME: - case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: - case PCI_DEVICE_ID_HP_DIVA_EVEREST: - rc = 3; - break; - case PCI_DEVICE_ID_HP_DIVA_TOSCA2: - rc = 2; - break; - case PCI_DEVICE_ID_HP_DIVA_MAESTRO: - rc = 4; - break; - case PCI_DEVICE_ID_HP_DIVA_POWERBAR: - case PCI_DEVICE_ID_HP_DIVA_HURRICANE: - rc = 1; - break; - } - - return rc; -} - -/* - * HP's Diva chip puts the 4th/5th serial port further out, and - * some serial ports are supposed to be hidden on certain models. - */ -static int -pci_hp_diva_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int offset = board->first_offset; - unsigned int bar = FL_GET_BASE(board->flags); - - switch (priv->dev->subsystem_device) { - case PCI_DEVICE_ID_HP_DIVA_MAESTRO: - if (idx == 3) - idx++; - break; - case PCI_DEVICE_ID_HP_DIVA_EVEREST: - if (idx > 0) - idx++; - if (idx > 2) - idx++; - break; - } - if (idx > 2) - offset = 0x18; - - offset += idx * board->uart_offset; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * Added for EKF Intel i960 serial boards - */ -static int pci_inteli960ni_init(struct pci_dev *dev) -{ - unsigned long oldval; - - if (!(dev->subsystem_device & 0x1000)) - return -ENODEV; - - /* is firmware started? */ - pci_read_config_dword(dev, 0x44, (void *)&oldval); - if (oldval == 0x00001000L) { /* RESET value */ - printk(KERN_DEBUG "Local i960 firmware missing"); - return -ENODEV; - } - return 0; -} - -/* - * Some PCI serial cards using the PLX 9050 PCI interface chip require - * that the card interrupt be explicitly enabled or disabled. This - * seems to be mainly needed on card using the PLX which also use I/O - * mapped memory. - */ -static int pci_plx9050_init(struct pci_dev *dev) -{ - u8 irq_config; - void __iomem *p; - - if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar 0", dev); - return 0; - } - - irq_config = 0x41; - if (dev->vendor == PCI_VENDOR_ID_PANACOM || - dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) - irq_config = 0x43; - - if ((dev->vendor == PCI_VENDOR_ID_PLX) && - (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) - /* - * As the megawolf cards have the int pins active - * high, and have 2 UART chips, both ints must be - * enabled on the 9050. Also, the UARTS are set in - * 16450 mode by default, so we have to enable the - * 16C950 'enhanced' mode so that we can use the - * deep FIFOs - */ - irq_config = 0x5b; - /* - * enable/disable interrupts - */ - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p == NULL) - return -ENOMEM; - writel(irq_config, p + 0x4c); - - /* - * Read the register back to ensure that it took effect. - */ - readl(p + 0x4c); - iounmap(p); - - return 0; -} - -static void __devexit pci_plx9050_exit(struct pci_dev *dev) -{ - u8 __iomem *p; - - if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) - return; - - /* - * disable interrupts - */ - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p != NULL) { - writel(0, p + 0x4c); - - /* - * Read the register back to ensure that it took effect. - */ - readl(p + 0x4c); - iounmap(p); - } -} - -#define NI8420_INT_ENABLE_REG 0x38 -#define NI8420_INT_ENABLE_BIT 0x2000 - -static void __devexit pci_ni8420_exit(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return; - - /* Disable the CPU Interrupt */ - writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), - p + NI8420_INT_ENABLE_REG); - iounmap(p); -} - - -/* MITE registers */ -#define MITE_IOWBSR1 0xc4 -#define MITE_IOWCR1 0xf4 -#define MITE_LCIMR1 0x08 -#define MITE_LCIMR2 0x10 - -#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) - -static void __devexit pci_ni8430_exit(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return; - - /* Disable the CPU Interrupt */ - writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); - iounmap(p); -} - -/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ -static int -sbs_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - bar = 0; - - if (idx < 4) { - /* first four channels map to 0, 0x100, 0x200, 0x300 */ - offset += idx * board->uart_offset; - } else if (idx < 8) { - /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ - offset += idx * board->uart_offset + 0xC00; - } else /* we have only 8 ports on PMC-OCTALPRO */ - return 1; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* -* This does initialization for PMC OCTALPRO cards: -* maps the device memory, resets the UARTs (needed, bc -* if the module is removed and inserted again, the card -* is in the sleep mode) and enables global interrupt. -*/ - -/* global control register offset for SBS PMC-OctalPro */ -#define OCT_REG_CR_OFF 0x500 - -static int sbs_init(struct pci_dev *dev) -{ - u8 __iomem *p; - - p = pci_ioremap_bar(dev, 0); - - if (p == NULL) - return -ENOMEM; - /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ - writeb(0x10, p + OCT_REG_CR_OFF); - udelay(50); - writeb(0x0, p + OCT_REG_CR_OFF); - - /* Set bit-2 (INTENABLE) of Control Register */ - writeb(0x4, p + OCT_REG_CR_OFF); - iounmap(p); - - return 0; -} - -/* - * Disables the global interrupt of PMC-OctalPro - */ - -static void __devexit sbs_exit(struct pci_dev *dev) -{ - u8 __iomem *p; - - p = pci_ioremap_bar(dev, 0); - /* FIXME: What if resource_len < OCT_REG_CR_OFF */ - if (p != NULL) - writeb(0, p + OCT_REG_CR_OFF); - iounmap(p); -} - -/* - * SIIG serial cards have an PCI interface chip which also controls - * the UART clocking frequency. Each UART can be clocked independently - * (except cards equiped with 4 UARTs) and initial clocking settings - * are stored in the EEPROM chip. It can cause problems because this - * version of serial driver doesn't support differently clocked UART's - * on single PCI card. To prevent this, initialization functions set - * high frequency clocking for all UART's on given card. It is safe (I - * hope) because it doesn't touch EEPROM settings to prevent conflicts - * with other OSes (like M$ DOS). - * - * SIIG support added by Andrey Panin , 10/1999 - * - * There is two family of SIIG serial cards with different PCI - * interface chip and different configuration methods: - * - 10x cards have control registers in IO and/or memory space; - * - 20x cards have control registers in standard PCI configuration space. - * - * Note: all 10x cards have PCI device ids 0x10.. - * all 20x cards have PCI device ids 0x20.. - * - * There are also Quartet Serial cards which use Oxford Semiconductor - * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. - * - * Note: some SIIG cards are probed by the parport_serial object. - */ - -#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) -#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) - -static int pci_siig10x_init(struct pci_dev *dev) -{ - u16 data; - void __iomem *p; - - switch (dev->device & 0xfff8) { - case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ - data = 0xffdf; - break; - case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ - data = 0xf7ff; - break; - default: /* 1S1P, 4S */ - data = 0xfffb; - break; - } - - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p == NULL) - return -ENOMEM; - - writew(readw(p + 0x28) & data, p + 0x28); - readw(p + 0x28); - iounmap(p); - return 0; -} - -#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) -#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) - -static int pci_siig20x_init(struct pci_dev *dev) -{ - u8 data; - - /* Change clock frequency for the first UART. */ - pci_read_config_byte(dev, 0x6f, &data); - pci_write_config_byte(dev, 0x6f, data & 0xef); - - /* If this card has 2 UART, we have to do the same with second UART. */ - if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || - ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { - pci_read_config_byte(dev, 0x73, &data); - pci_write_config_byte(dev, 0x73, data & 0xef); - } - return 0; -} - -static int pci_siig_init(struct pci_dev *dev) -{ - unsigned int type = dev->device & 0xff00; - - if (type == 0x1000) - return pci_siig10x_init(dev); - else if (type == 0x2000) - return pci_siig20x_init(dev); - - moan_device("Unknown SIIG card", dev); - return -ENODEV; -} - -static int pci_siig_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; - - if (idx > 3) { - bar = 4; - offset = (idx - 4) * 8; - } - - return setup_port(priv, port, bar, offset, 0); -} - -/* - * Timedia has an explosion of boards, and to avoid the PCI table from - * growing *huge*, we use this function to collapse some 70 entries - * in the PCI table into one, for sanity's and compactness's sake. - */ -static const unsigned short timedia_single_port[] = { - 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 -}; - -static const unsigned short timedia_dual_port[] = { - 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, - 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, - 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, - 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, - 0xD079, 0 -}; - -static const unsigned short timedia_quad_port[] = { - 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, - 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, - 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, - 0xB157, 0 -}; - -static const unsigned short timedia_eight_port[] = { - 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, - 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 -}; - -static const struct timedia_struct { - int num; - const unsigned short *ids; -} timedia_data[] = { - { 1, timedia_single_port }, - { 2, timedia_dual_port }, - { 4, timedia_quad_port }, - { 8, timedia_eight_port } -}; - -static int pci_timedia_init(struct pci_dev *dev) -{ - const unsigned short *ids; - int i, j; - - for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { - ids = timedia_data[i].ids; - for (j = 0; ids[j]; j++) - if (dev->subsystem_device == ids[j]) - return timedia_data[i].num; - } - return 0; -} - -/* - * Timedia/SUNIX uses a mixture of BARs and offsets - * Ugh, this is ugly as all hell --- TYT - */ -static int -pci_timedia_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = 0, offset = board->first_offset; - - switch (idx) { - case 0: - bar = 0; - break; - case 1: - offset = board->uart_offset; - bar = 0; - break; - case 2: - bar = 1; - break; - case 3: - offset = board->uart_offset; - /* FALLTHROUGH */ - case 4: /* BAR 2 */ - case 5: /* BAR 3 */ - case 6: /* BAR 4 */ - case 7: /* BAR 5 */ - bar = idx - 2; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * Some Titan cards are also a little weird - */ -static int -titan_400l_800l_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - switch (idx) { - case 0: - bar = 1; - break; - case 1: - bar = 2; - break; - default: - bar = 4; - offset = (idx - 2) * board->uart_offset; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -static int pci_xircom_init(struct pci_dev *dev) -{ - msleep(100); - return 0; -} - -static int pci_ni8420_init(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return 0; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return -ENOMEM; - - /* Enable CPU Interrupt */ - writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, - p + NI8420_INT_ENABLE_REG); - - iounmap(p); - return 0; -} - -#define MITE_IOWBSR1_WSIZE 0xa -#define MITE_IOWBSR1_WIN_OFFSET 0x800 -#define MITE_IOWBSR1_WENAB (1 << 7) -#define MITE_LCIMR1_IO_IE_0 (1 << 24) -#define MITE_LCIMR2_SET_CPU_IE (1 << 31) -#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe - -static int pci_ni8430_init(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - u32 device_window; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return 0; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return -ENOMEM; - - /* Set device window address and size in BAR0 */ - device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) - | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; - writel(device_window, p + MITE_IOWBSR1); - - /* Set window access to go to RAMSEL IO address space */ - writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), - p + MITE_IOWCR1); - - /* Enable IO Bus Interrupt 0 */ - writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); - - /* Enable CPU Interrupt */ - writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); - - iounmap(p); - return 0; -} - -/* UART Port Control Register */ -#define NI8430_PORTCON 0x0f -#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) - -static int -pci_ni8430_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar, offset = board->first_offset; - - if (idx >= board->num_ports) - return 1; - - bar = FL_GET_BASE(board->flags); - offset += idx * board->uart_offset; - - base = pci_resource_start(priv->dev, bar); - len = pci_resource_len(priv->dev, bar); - p = ioremap_nocache(base, len); - - /* enable the transciever */ - writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, - p + offset + NI8430_PORTCON); - - iounmap(p); - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - - -static int pci_netmos_init(struct pci_dev *dev) -{ - /* subdevice 0x00PS means

parallel, serial */ - unsigned int num_serial = dev->subsystem_device & 0xf; - - if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || - (dev->device == PCI_DEVICE_ID_NETMOS_9865)) - return 0; - if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && - dev->subsystem_device == 0x0299) - return 0; - - if (num_serial == 0) - return -ENODEV; - return num_serial; -} - -/* - * These chips are available with optionally one parallel port and up to - * two serial ports. Unfortunately they all have the same product id. - * - * Basic configuration is done over a region of 32 I/O ports. The base - * ioport is called INTA or INTC, depending on docs/other drivers. - * - * The region of the 32 I/O ports is configured in POSIO0R... - */ - -/* registers */ -#define ITE_887x_MISCR 0x9c -#define ITE_887x_INTCBAR 0x78 -#define ITE_887x_UARTBAR 0x7c -#define ITE_887x_PS0BAR 0x10 -#define ITE_887x_POSIO0 0x60 - -/* I/O space size */ -#define ITE_887x_IOSIZE 32 -/* I/O space size (bits 26-24; 8 bytes = 011b) */ -#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) -/* I/O space size (bits 26-24; 32 bytes = 101b) */ -#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) -/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ -#define ITE_887x_POSIO_SPEED (3 << 29) -/* enable IO_Space bit */ -#define ITE_887x_POSIO_ENABLE (1 << 31) - -static int pci_ite887x_init(struct pci_dev *dev) -{ - /* inta_addr are the configuration addresses of the ITE */ - static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, - 0x200, 0x280, 0 }; - int ret, i, type; - struct resource *iobase = NULL; - u32 miscr, uartbar, ioport; - - /* search for the base-ioport */ - i = 0; - while (inta_addr[i] && iobase == NULL) { - iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, - "ite887x"); - if (iobase != NULL) { - /* write POSIO0R - speed | size | ioport */ - pci_write_config_dword(dev, ITE_887x_POSIO0, - ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | - ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); - /* write INTCBAR - ioport */ - pci_write_config_dword(dev, ITE_887x_INTCBAR, - inta_addr[i]); - ret = inb(inta_addr[i]); - if (ret != 0xff) { - /* ioport connected */ - break; - } - release_region(iobase->start, ITE_887x_IOSIZE); - iobase = NULL; - } - i++; - } - - if (!inta_addr[i]) { - printk(KERN_ERR "ite887x: could not find iobase\n"); - return -ENODEV; - } - - /* start of undocumented type checking (see parport_pc.c) */ - type = inb(iobase->start + 0x18) & 0x0f; - - switch (type) { - case 0x2: /* ITE8871 (1P) */ - case 0xa: /* ITE8875 (1P) */ - ret = 0; - break; - case 0xe: /* ITE8872 (2S1P) */ - ret = 2; - break; - case 0x6: /* ITE8873 (1S) */ - ret = 1; - break; - case 0x8: /* ITE8874 (2S) */ - ret = 2; - break; - default: - moan_device("Unknown ITE887x", dev); - ret = -ENODEV; - } - - /* configure all serial ports */ - for (i = 0; i < ret; i++) { - /* read the I/O port from the device */ - pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), - &ioport); - ioport &= 0x0000FF00; /* the actual base address */ - pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), - ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | - ITE_887x_POSIO_IOSIZE_8 | ioport); - - /* write the ioport to the UARTBAR */ - pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); - uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ - uartbar |= (ioport << (16 * i)); /* set the ioport */ - pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); - - /* get current config */ - pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); - /* disable interrupts (UARTx_Routing[3:0]) */ - miscr &= ~(0xf << (12 - 4 * i)); - /* activate the UART (UARTx_En) */ - miscr |= 1 << (23 - i); - /* write new config with activated UART */ - pci_write_config_dword(dev, ITE_887x_MISCR, miscr); - } - - if (ret <= 0) { - /* the device has no UARTs if we get here */ - release_region(iobase->start, ITE_887x_IOSIZE); - } - - return ret; -} - -static void __devexit pci_ite887x_exit(struct pci_dev *dev) -{ - u32 ioport; - /* the ioport is bit 0-15 in POSIO0R */ - pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); - ioport &= 0xffff; - release_region(ioport, ITE_887x_IOSIZE); -} - -/* - * Oxford Semiconductor Inc. - * Check that device is part of the Tornado range of devices, then determine - * the number of ports available on the device. - */ -static int pci_oxsemi_tornado_init(struct pci_dev *dev) -{ - u8 __iomem *p; - unsigned long deviceID; - unsigned int number_uarts = 0; - - /* OxSemi Tornado devices are all 0xCxxx */ - if (dev->vendor == PCI_VENDOR_ID_OXSEMI && - (dev->device & 0xF000) != 0xC000) - return 0; - - p = pci_iomap(dev, 0, 5); - if (p == NULL) - return -ENOMEM; - - deviceID = ioread32(p); - /* Tornado device */ - if (deviceID == 0x07000200) { - number_uarts = ioread8(p + 4); - printk(KERN_DEBUG - "%d ports detected on Oxford PCI Express device\n", - number_uarts); - } - pci_iounmap(dev, p); - return number_uarts; -} - -static int -pci_default_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset, maxnr; - - bar = FL_GET_BASE(board->flags); - if (board->flags & FL_BASE_BARS) - bar += idx; - else - offset += idx * board->uart_offset; - - maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> - (board->reg_shift + 3); - - if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) - return 1; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -static int -ce4100_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - int ret; - - ret = setup_port(priv, port, 0, 0, board->reg_shift); - port->iotype = UPIO_MEM32; - port->type = PORT_XSCALE; - port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); - port->regshift = 2; - - return ret; -} - -static int skip_tx_en_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - port->flags |= UPF_NO_TXEN_TEST; - printk(KERN_DEBUG "serial8250: skipping TxEn test for device " - "[%04x:%04x] subsystem [%04x:%04x]\n", - priv->dev->vendor, - priv->dev->device, - priv->dev->subsystem_vendor, - priv->dev->subsystem_device); - - return pci_default_setup(priv, board, port, idx); -} - -/* This should be in linux/pci_ids.h */ -#define PCI_VENDOR_ID_SBSMODULARIO 0x124B -#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B -#define PCI_DEVICE_ID_OCTPRO 0x0001 -#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 -#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 -#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 -#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 -#define PCI_VENDOR_ID_ADVANTECH 0x13fe -#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 -#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 -#define PCI_DEVICE_ID_TITAN_200I 0x8028 -#define PCI_DEVICE_ID_TITAN_400I 0x8048 -#define PCI_DEVICE_ID_TITAN_800I 0x8088 -#define PCI_DEVICE_ID_TITAN_800EH 0xA007 -#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 -#define PCI_DEVICE_ID_TITAN_400EH 0xA009 -#define PCI_DEVICE_ID_TITAN_100E 0xA010 -#define PCI_DEVICE_ID_TITAN_200E 0xA012 -#define PCI_DEVICE_ID_TITAN_400E 0xA013 -#define PCI_DEVICE_ID_TITAN_800E 0xA014 -#define PCI_DEVICE_ID_TITAN_200EI 0xA016 -#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 -#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 - -/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ -#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 - -/* - * Master list of serial port init/setup/exit quirks. - * This does not describe the general nature of the port. - * (ie, baud base, number and location of ports, etc) - * - * This list is ordered alphabetically by vendor then device. - * Specific entries must come before more generic entries. - */ -static struct pci_serial_quirk pci_serial_quirks[] __refdata = { - /* - * ADDI-DATA GmbH communication cards - */ - { - .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, - .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = addidata_apci7800_setup, - }, - /* - * AFAVLAB cards - these may be called via parport_serial - * It is not clear whether this applies to all products. - */ - { - .vendor = PCI_VENDOR_ID_AFAVLAB, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = afavlab_setup, - }, - /* - * HP Diva - */ - { - .vendor = PCI_VENDOR_ID_HP, - .device = PCI_DEVICE_ID_HP_DIVA, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_hp_diva_init, - .setup = pci_hp_diva_setup, - }, - /* - * Intel - */ - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_80960_RP, - .subvendor = 0xe4bf, - .subdevice = PCI_ANY_ID, - .init = pci_inteli960ni_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_8257X_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82573L_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82573E_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_CE4100_UART, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = ce4100_serial_setup, - }, - /* - * ITE - */ - { - .vendor = PCI_VENDOR_ID_ITE, - .device = PCI_DEVICE_ID_ITE_8872, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ite887x_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ite887x_exit), - }, - /* - * National Instruments - */ - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI23216, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2328, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2324I, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2322I, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_23216, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2328, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8422_2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8422_2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8430_init, - .setup = pci_ni8430_setup, - .exit = __devexit_p(pci_ni8430_exit), - }, - /* - * Panacom - */ - { - .vendor = PCI_VENDOR_ID_PANACOM, - .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PANACOM, - .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - /* - * PLX - */ - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9030, - .subvendor = PCI_SUBVENDOR_ID_PERLE, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_SUBVENDOR_ID_EXSYS, - .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, - .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_ROMULUS, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - /* - * SBS Technologies, Inc., PMC-OCTALPRO 232 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., PMC-OCTALPRO 422 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., P-Octal 232 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_POCTAL232, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., P-Octal 422 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_POCTAL422, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SIIG cards - these may be called via parport_serial - */ - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig_init, - .setup = pci_siig_setup, - }, - /* - * Titan cards - */ - { - .vendor = PCI_VENDOR_ID_TITAN, - .device = PCI_DEVICE_ID_TITAN_400L, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = titan_400l_800l_setup, - }, - { - .vendor = PCI_VENDOR_ID_TITAN, - .device = PCI_DEVICE_ID_TITAN_800L, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = titan_400l_800l_setup, - }, - /* - * Timedia cards - */ - { - .vendor = PCI_VENDOR_ID_TIMEDIA, - .device = PCI_DEVICE_ID_TIMEDIA_1889, - .subvendor = PCI_VENDOR_ID_TIMEDIA, - .subdevice = PCI_ANY_ID, - .init = pci_timedia_init, - .setup = pci_timedia_setup, - }, - { - .vendor = PCI_VENDOR_ID_TIMEDIA, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_timedia_setup, - }, - /* - * Xircom cards - */ - { - .vendor = PCI_VENDOR_ID_XIRCOM, - .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_xircom_init, - .setup = pci_default_setup, - }, - /* - * Netmos cards - these may be called via parport_serial - */ - { - .vendor = PCI_VENDOR_ID_NETMOS, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_netmos_init, - .setup = pci_default_setup, - }, - /* - * For Oxford Semiconductor and Mainpine - */ - { - .vendor = PCI_VENDOR_ID_OXSEMI, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_MAINPINE, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, - }, - /* - * Default "match everything" terminator entry - */ - { - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - } -}; - -static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) -{ - return quirk_id == PCI_ANY_ID || quirk_id == dev_id; -} - -static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) -{ - struct pci_serial_quirk *quirk; - - for (quirk = pci_serial_quirks; ; quirk++) - if (quirk_id_matches(quirk->vendor, dev->vendor) && - quirk_id_matches(quirk->device, dev->device) && - quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && - quirk_id_matches(quirk->subdevice, dev->subsystem_device)) - break; - return quirk; -} - -static inline int get_pci_irq(struct pci_dev *dev, - const struct pciserial_board *board) -{ - if (board->flags & FL_NOIRQ) - return 0; - else - return dev->irq; -} - -/* - * This is the configuration table for all of the PCI serial boards - * which we support. It is directly indexed by the pci_board_num_t enum - * value, which is encoded in the pci_device_id PCI probe table's - * driver_data member. - * - * The makeup of these names are: - * pbn_bn{_bt}_n_baud{_offsetinhex} - * - * bn = PCI BAR number - * bt = Index using PCI BARs - * n = number of serial ports - * baud = baud rate - * offsetinhex = offset for each sequential port (in hex) - * - * This table is sorted by (in order): bn, bt, baud, offsetindex, n. - * - * Please note: in theory if n = 1, _bt infix should make no difference. - * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 - */ -enum pci_board_num_t { - pbn_default = 0, - - pbn_b0_1_115200, - pbn_b0_2_115200, - pbn_b0_4_115200, - pbn_b0_5_115200, - pbn_b0_8_115200, - - pbn_b0_1_921600, - pbn_b0_2_921600, - pbn_b0_4_921600, - - pbn_b0_2_1130000, - - pbn_b0_4_1152000, - - pbn_b0_2_1843200, - pbn_b0_4_1843200, - - pbn_b0_2_1843200_200, - pbn_b0_4_1843200_200, - pbn_b0_8_1843200_200, - - pbn_b0_1_4000000, - - pbn_b0_bt_1_115200, - pbn_b0_bt_2_115200, - pbn_b0_bt_4_115200, - pbn_b0_bt_8_115200, - - pbn_b0_bt_1_460800, - pbn_b0_bt_2_460800, - pbn_b0_bt_4_460800, - - pbn_b0_bt_1_921600, - pbn_b0_bt_2_921600, - pbn_b0_bt_4_921600, - pbn_b0_bt_8_921600, - - pbn_b1_1_115200, - pbn_b1_2_115200, - pbn_b1_4_115200, - pbn_b1_8_115200, - pbn_b1_16_115200, - - pbn_b1_1_921600, - pbn_b1_2_921600, - pbn_b1_4_921600, - pbn_b1_8_921600, - - pbn_b1_2_1250000, - - pbn_b1_bt_1_115200, - pbn_b1_bt_2_115200, - pbn_b1_bt_4_115200, - - pbn_b1_bt_2_921600, - - pbn_b1_1_1382400, - pbn_b1_2_1382400, - pbn_b1_4_1382400, - pbn_b1_8_1382400, - - pbn_b2_1_115200, - pbn_b2_2_115200, - pbn_b2_4_115200, - pbn_b2_8_115200, - - pbn_b2_1_460800, - pbn_b2_4_460800, - pbn_b2_8_460800, - pbn_b2_16_460800, - - pbn_b2_1_921600, - pbn_b2_4_921600, - pbn_b2_8_921600, - - pbn_b2_8_1152000, - - pbn_b2_bt_1_115200, - pbn_b2_bt_2_115200, - pbn_b2_bt_4_115200, - - pbn_b2_bt_2_921600, - pbn_b2_bt_4_921600, - - pbn_b3_2_115200, - pbn_b3_4_115200, - pbn_b3_8_115200, - - pbn_b4_bt_2_921600, - pbn_b4_bt_4_921600, - pbn_b4_bt_8_921600, - - /* - * Board-specific versions. - */ - pbn_panacom, - pbn_panacom2, - pbn_panacom4, - pbn_exsys_4055, - pbn_plx_romulus, - pbn_oxsemi, - pbn_oxsemi_1_4000000, - pbn_oxsemi_2_4000000, - pbn_oxsemi_4_4000000, - pbn_oxsemi_8_4000000, - pbn_intel_i960, - pbn_sgi_ioc3, - pbn_computone_4, - pbn_computone_6, - pbn_computone_8, - pbn_sbsxrsio, - pbn_exar_XR17C152, - pbn_exar_XR17C154, - pbn_exar_XR17C158, - pbn_exar_ibm_saturn, - pbn_pasemi_1682M, - pbn_ni8430_2, - pbn_ni8430_4, - pbn_ni8430_8, - pbn_ni8430_16, - pbn_ADDIDATA_PCIe_1_3906250, - pbn_ADDIDATA_PCIe_2_3906250, - pbn_ADDIDATA_PCIe_4_3906250, - pbn_ADDIDATA_PCIe_8_3906250, - pbn_ce4100_1_115200, -}; - -/* - * uart_offset - the space between channels - * reg_shift - describes how the UART registers are mapped - * to PCI memory by the card. - * For example IER register on SBS, Inc. PMC-OctPro is located at - * offset 0x10 from the UART base, while UART_IER is defined as 1 - * in include/linux/serial_reg.h, - * see first lines of serial_in() and serial_out() in 8250.c -*/ - -static struct pciserial_board pci_boards[] __devinitdata = { - [pbn_default] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_2_115200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_4_115200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_5_115200] = { - .flags = FL_BASE0, - .num_ports = 5, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_8_115200] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_1_921600] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_2_921600] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_4_921600] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b0_2_1130000] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1130000, - .uart_offset = 8, - }, - - [pbn_b0_4_1152000] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1152000, - .uart_offset = 8, - }, - - [pbn_b0_2_1843200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1843200, - .uart_offset = 8, - }, - [pbn_b0_4_1843200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1843200, - .uart_offset = 8, - }, - - [pbn_b0_2_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_4_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_8_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_1_4000000] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 4000000, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_2_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_4_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_8_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b0_bt_2_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b0_bt_4_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 460800, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_2_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_4_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_8_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b1_1_115200] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_2_115200] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_4_115200] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_8_115200] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_16_115200] = { - .flags = FL_BASE1, - .num_ports = 16, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b1_1_921600] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_2_921600] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_4_921600] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_8_921600] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_2_1250000] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 1250000, - .uart_offset = 8, - }, - - [pbn_b1_bt_1_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_bt_2_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_bt_4_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b1_bt_2_921600] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b1_1_1382400] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_2_1382400] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_4_1382400] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_8_1382400] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 1382400, - .uart_offset = 8, - }, - - [pbn_b2_1_115200] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_2_115200] = { - .flags = FL_BASE2, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_4_115200] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_8_115200] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b2_1_460800] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_4_460800] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_8_460800] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_16_460800] = { - .flags = FL_BASE2, - .num_ports = 16, - .base_baud = 460800, - .uart_offset = 8, - }, - - [pbn_b2_1_921600] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_4_921600] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_8_921600] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b2_8_1152000] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 1152000, - .uart_offset = 8, - }, - - [pbn_b2_bt_1_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_bt_2_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_bt_4_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b2_bt_2_921600] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_bt_4_921600] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b3_2_115200] = { - .flags = FL_BASE3, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b3_4_115200] = { - .flags = FL_BASE3, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b3_8_115200] = { - .flags = FL_BASE3, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b4_bt_2_921600] = { - .flags = FL_BASE4, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b4_bt_4_921600] = { - .flags = FL_BASE4, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b4_bt_8_921600] = { - .flags = FL_BASE4, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - /* - * Entries following this are board-specific. - */ - - /* - * Panacom - IOMEM - */ - [pbn_panacom] = { - .flags = FL_BASE2, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - [pbn_panacom2] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - [pbn_panacom4] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - - [pbn_exsys_4055] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - /* I think this entry is broken - the first_offset looks wrong --rmk */ - [pbn_plx_romulus] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8 << 2, - .reg_shift = 2, - .first_offset = 0x03, - }, - - /* - * This board uses the size of PCI Base region 0 to - * signal now many ports are available - */ - [pbn_oxsemi] = { - .flags = FL_BASE0|FL_REGION_SZ_CAP, - .num_ports = 32, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_oxsemi_1_4000000] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_2_4000000] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_4_4000000] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_8_4000000] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - - - /* - * EKF addition for i960 Boards form EKF with serial port. - * Max 256 ports. - */ - [pbn_intel_i960] = { - .flags = FL_BASE0, - .num_ports = 32, - .base_baud = 921600, - .uart_offset = 8 << 2, - .reg_shift = 2, - .first_offset = 0x10000, - }, - [pbn_sgi_ioc3] = { - .flags = FL_BASE0|FL_NOIRQ, - .num_ports = 1, - .base_baud = 458333, - .uart_offset = 8, - .reg_shift = 0, - .first_offset = 0x20178, - }, - - /* - * Computone - uses IOMEM. - */ - [pbn_computone_4] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_computone_6] = { - .flags = FL_BASE0, - .num_ports = 6, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_computone_8] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_sbsxrsio] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 460800, - .uart_offset = 256, - .reg_shift = 4, - }, - /* - * Exar Corp. XR17C15[248] Dual/Quad/Octal UART - * Only basic 16550A support. - * XR17C15[24] are not tested, but they should work. - */ - [pbn_exar_XR17C152] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_XR17C154] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_XR17C158] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_ibm_saturn] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 0x200, - }, - - /* - * PA Semi PWRficient PA6T-1682M on-chip UART - */ - [pbn_pasemi_1682M] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 8333333, - }, - /* - * National Instruments 843x - */ - [pbn_ni8430_16] = { - .flags = FL_BASE0, - .num_ports = 16, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_8] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_4] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_2] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - /* - * ADDI-DATA GmbH PCI-Express communication cards - */ - [pbn_ADDIDATA_PCIe_1_3906250] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_2_3906250] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_4_3906250] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_8_3906250] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ce4100_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .reg_shift = 2, - }, -}; - -static const struct pci_device_id softmodem_blacklist[] = { - { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ - { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ - { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ -}; - -/* - * Given a complete unknown PCI device, try to use some heuristics to - * guess what the configuration might be, based on the pitiful PCI - * serial specs. Returns 0 on success, 1 on failure. - */ -static int __devinit -serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) -{ - const struct pci_device_id *blacklist; - int num_iomem, num_port, first_port = -1, i; - - /* - * If it is not a communications device or the programming - * interface is greater than 6, give up. - * - * (Should we try to make guesses for multiport serial devices - * later?) - */ - if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && - ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || - (dev->class & 0xff) > 6) - return -ENODEV; - - /* - * Do not access blacklisted devices that are known not to - * feature serial ports. - */ - for (blacklist = softmodem_blacklist; - blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); - blacklist++) { - if (dev->vendor == blacklist->vendor && - dev->device == blacklist->device) - return -ENODEV; - } - - num_iomem = num_port = 0; - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (pci_resource_flags(dev, i) & IORESOURCE_IO) { - num_port++; - if (first_port == -1) - first_port = i; - } - if (pci_resource_flags(dev, i) & IORESOURCE_MEM) - num_iomem++; - } - - /* - * If there is 1 or 0 iomem regions, and exactly one port, - * use it. We guess the number of ports based on the IO - * region size. - */ - if (num_iomem <= 1 && num_port == 1) { - board->flags = first_port; - board->num_ports = pci_resource_len(dev, first_port) / 8; - return 0; - } - - /* - * Now guess if we've got a board which indexes by BARs. - * Each IO BAR should be 8 bytes, and they should follow - * consecutively. - */ - first_port = -1; - num_port = 0; - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (pci_resource_flags(dev, i) & IORESOURCE_IO && - pci_resource_len(dev, i) == 8 && - (first_port == -1 || (first_port + num_port) == i)) { - num_port++; - if (first_port == -1) - first_port = i; - } - } - - if (num_port > 1) { - board->flags = first_port | FL_BASE_BARS; - board->num_ports = num_port; - return 0; - } - - return -ENODEV; -} - -static inline int -serial_pci_matches(const struct pciserial_board *board, - const struct pciserial_board *guessed) -{ - return - board->num_ports == guessed->num_ports && - board->base_baud == guessed->base_baud && - board->uart_offset == guessed->uart_offset && - board->reg_shift == guessed->reg_shift && - board->first_offset == guessed->first_offset; -} - -struct serial_private * -pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) -{ - struct uart_port serial_port; - struct serial_private *priv; - struct pci_serial_quirk *quirk; - int rc, nr_ports, i; - - nr_ports = board->num_ports; - - /* - * Find an init and setup quirks. - */ - quirk = find_quirk(dev); - - /* - * Run the new-style initialization function. - * The initialization function returns: - * <0 - error - * 0 - use board->num_ports - * >0 - number of ports - */ - if (quirk->init) { - rc = quirk->init(dev); - if (rc < 0) { - priv = ERR_PTR(rc); - goto err_out; - } - if (rc) - nr_ports = rc; - } - - priv = kzalloc(sizeof(struct serial_private) + - sizeof(unsigned int) * nr_ports, - GFP_KERNEL); - if (!priv) { - priv = ERR_PTR(-ENOMEM); - goto err_deinit; - } - - priv->dev = dev; - priv->quirk = quirk; - - memset(&serial_port, 0, sizeof(struct uart_port)); - serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - serial_port.uartclk = board->base_baud * 16; - serial_port.irq = get_pci_irq(dev, board); - serial_port.dev = &dev->dev; - - for (i = 0; i < nr_ports; i++) { - if (quirk->setup(priv, board, &serial_port, i)) - break; - -#ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", - serial_port.iobase, serial_port.irq, serial_port.iotype); -#endif - - priv->line[i] = serial8250_register_port(&serial_port); - if (priv->line[i] < 0) { - printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); - break; - } - } - priv->nr = i; - return priv; - -err_deinit: - if (quirk->exit) - quirk->exit(dev); -err_out: - return priv; -} -EXPORT_SYMBOL_GPL(pciserial_init_ports); - -void pciserial_remove_ports(struct serial_private *priv) -{ - struct pci_serial_quirk *quirk; - int i; - - for (i = 0; i < priv->nr; i++) - serial8250_unregister_port(priv->line[i]); - - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (priv->remapped_bar[i]) - iounmap(priv->remapped_bar[i]); - priv->remapped_bar[i] = NULL; - } - - /* - * Find the exit quirks. - */ - quirk = find_quirk(priv->dev); - if (quirk->exit) - quirk->exit(priv->dev); - - kfree(priv); -} -EXPORT_SYMBOL_GPL(pciserial_remove_ports); - -void pciserial_suspend_ports(struct serial_private *priv) -{ - int i; - - for (i = 0; i < priv->nr; i++) - if (priv->line[i] >= 0) - serial8250_suspend_port(priv->line[i]); -} -EXPORT_SYMBOL_GPL(pciserial_suspend_ports); - -void pciserial_resume_ports(struct serial_private *priv) -{ - int i; - - /* - * Ensure that the board is correctly configured. - */ - if (priv->quirk->init) - priv->quirk->init(priv->dev); - - for (i = 0; i < priv->nr; i++) - if (priv->line[i] >= 0) - serial8250_resume_port(priv->line[i]); -} -EXPORT_SYMBOL_GPL(pciserial_resume_ports); - -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct serial_private *priv; - const struct pciserial_board *board; - struct pciserial_board tmp; - int rc; - - if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", - ent->driver_data); - return -EINVAL; - } - - board = &pci_boards[ent->driver_data]; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - if (ent->driver_data == pbn_default) { - /* - * Use a copy of the pci_board entry for this; - * avoid changing entries in the table. - */ - memcpy(&tmp, board, sizeof(struct pciserial_board)); - board = &tmp; - - /* - * We matched one of our class entries. Try to - * determine the parameters of this board. - */ - rc = serial_pci_guess_board(dev, &tmp); - if (rc) - goto disable; - } else { - /* - * We matched an explicit entry. If we are able to - * detect this boards settings with our heuristic, - * then we no longer need this entry. - */ - memcpy(&tmp, &pci_boards[pbn_default], - sizeof(struct pciserial_board)); - rc = serial_pci_guess_board(dev, &tmp); - if (rc == 0 && serial_pci_matches(board, &tmp)) - moan_device("Redundant entry in serial pci_table.", - dev); - } - - priv = pciserial_init_ports(dev, board); - if (!IS_ERR(priv)) { - pci_set_drvdata(dev, priv); - return 0; - } - - rc = PTR_ERR(priv); - - disable: - pci_disable_device(dev); - return rc; -} - -static void __devexit pciserial_remove_one(struct pci_dev *dev) -{ - struct serial_private *priv = pci_get_drvdata(dev); - - pci_set_drvdata(dev, NULL); - - pciserial_remove_ports(priv); - - pci_disable_device(dev); -} - -#ifdef CONFIG_PM -static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) -{ - struct serial_private *priv = pci_get_drvdata(dev); - - if (priv) - pciserial_suspend_ports(priv); - - pci_save_state(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int pciserial_resume_one(struct pci_dev *dev) -{ - int err; - struct serial_private *priv = pci_get_drvdata(dev); - - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - - if (priv) { - /* - * The device may have been disabled. Re-enable it. - */ - err = pci_enable_device(dev); - /* FIXME: We cannot simply error out here */ - if (err) - printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n"); - pciserial_resume_ports(priv); - } - return 0; -} -#endif - -static struct pci_device_id serial_pci_tbl[] = { - /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ - { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, - PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, - pbn_b2_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, - pbn_b1_8_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, - pbn_b1_4_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, - pbn_b1_2_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, - pbn_b1_8_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, - pbn_b1_4_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, - pbn_b1_2_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, - pbn_b1_2_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, - pbn_b1_2_1250000 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, - pbn_b0_2_1843200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, - pbn_b0_4_1843200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_AFAVLAB, - PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, - pbn_b0_4_1152000 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, - 0, 0, pbn_exar_ibm_saturn }, - - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_1_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_115200 }, - - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - /* - * VScom SPCOM800, from sl@s.pl - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_921600 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_4_921600 }, - /* Unknown card - subdevice 0x1584 */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_VENDOR_ID_PLX, - PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, - pbn_b0_4_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_KEYSPAN, - PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, - pbn_panacom }, - { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_panacom4 }, - { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_panacom2 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_VENDOR_ID_ESDGMBH, - PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, - pbn_b2_4_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, - pbn_b2_4_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, - pbn_b2_16_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, - pbn_b2_16_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, - pbn_b2_4_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_EXSYS, - PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, - pbn_exsys_4055 }, - /* - * Megawolf Romulus PCI Serial Card, from Mike Hudson - * (Exoray@isys.ca) - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, - 0x10b5, 0x106a, 0, 0, - pbn_plx_romulus }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_4_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_2_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, - 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, - 0, 0, - pbn_b0_4_1152000 }, - { PCI_VENDOR_ID_OXSEMI, 0x9505, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - - /* - * The below card is a little controversial since it is the - * subject of a PCI vendor/device ID clash. (See - * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). - * For now just used the hex ID 0x950a. - */ - { PCI_VENDOR_ID_OXSEMI, 0x950a, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, - pbn_b0_2_115200 }, - { PCI_VENDOR_ID_OXSEMI, 0x950a, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_2_1130000 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, - PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_115200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, - PCI_ANY_ID , PCI_ANY_ID, 0, 0, - pbn_b2_8_1152000 }, - - /* - * Oxford Semiconductor Inc. Tornado PCI express device range. - */ - { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - /* - * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado - */ - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, - pbn_oxsemi_8_4000000 }, - /* - * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, - * from skokodyn@yahoo.com - */ - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, - pbn_sbsxrsio }, - - /* - * Digitan DS560-558, from jimd@esoft.com - */ - { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_115200 }, - - /* - * Titan Electronic cards - * The 400L and 800L have a custom setup quirk. - */ - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_8_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - - /* - * Computone devices submitted by Doug McNash dmcnash@computone.com - */ - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, - 0, 0, pbn_computone_4 }, - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, - 0, 0, pbn_computone_8 }, - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, - 0, 0, pbn_computone_6 }, - - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi }, - { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, - PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_921600 }, - - /* - * AFAVLAB serial card, from Harald Welte - */ - { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_115200 }, - { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_115200 }, - - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_460800 }, - - /* - * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). - * Cards are identified by their subsystem vendor IDs, which - * (in hex) match the model number. - * - * Note that JC140x are RS422/485 cards which require ox950 - * ACR = 0x10, and as such are not currently fully supported. - */ - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1204, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, -/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1402, 0x0002, 0, 0, - pbn_b0_2_921600 }, */ -/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1404, 0x0004, 0, 0, - pbn_b0_4_921600 }, */ - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, - 0x1204, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - /* - * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com - */ - { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_1382400 }, - - /* - * Dell Remote Access Card III - Tim_T_Murphy@Dell.com - */ - { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_1382400 }, - - /* - * RAStel 2 port modem, gerg@moreton.com.au - */ - { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - - /* - * EKF addition for i960 Boards form EKF with serial port - */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, - 0xE4BF, PCI_ANY_ID, 0, 0, - pbn_intel_i960 }, - - /* - * Xircom Cardbus/Ethernet combos - */ - { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - /* - * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) - */ - { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - - /* - * Untested PCI modems, sent in from various folks... - */ - - /* - * Elsa Model 56K PCI Modem, from Andreas Rath - */ - { PCI_VENDOR_ID_ROCKWELL, 0x1004, - 0x1048, 0x1500, 0, 0, - pbn_b1_1_115200 }, - - { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, - 0xFF00, 0, 0, 0, - pbn_sgi_ioc3 }, - - /* - * HP Diva card - */ - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, - PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, - pbn_b1_1_115200 }, - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_5_115200 }, - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_115200 }, - - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_2_115200 }, - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_4_115200 }, - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_8_115200 }, - - /* - * Exar Corp. XR17C15[248] Dual/Quad/Octal UART - */ - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C152 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C154 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C158 }, - - /* - * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) - */ - { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - /* - * ITE - */ - { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, - PCI_ANY_ID, PCI_ANY_ID, - 0, 0, - pbn_b1_bt_1_115200 }, - - /* - * IntaShield IS-200 - */ - { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ - pbn_b2_2_115200 }, - /* - * IntaShield IS-400 - */ - { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ - pbn_b2_4_115200 }, - /* - * Perle PCI-RAS cards - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, - 0, 0, pbn_b2_4_921600 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, - 0, 0, pbn_b2_8_921600 }, - - /* - * Mainpine series cards: Fairly standard layout but fools - * parts of the autodetect in some cases and uses otherwise - * unmatched communications subclasses in the PCI Express case - */ - - { /* RockForceDUO */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0200, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUATRO */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0300, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceDUO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0400, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUATRO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0500, - 0, 0, pbn_b0_4_115200 }, - { /* RockForce+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0600, - 0, 0, pbn_b0_2_115200 }, - { /* RockForce+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0700, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceOCTO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0800, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceDUO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0C00, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUARTRO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0D00, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceOCTO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x1D00, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceD1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2000, - 0, 0, pbn_b0_1_115200 }, - { /* RockForceF1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2100, - 0, 0, pbn_b0_1_115200 }, - { /* RockForceD2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2200, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceF2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2300, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceD4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2400, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceF4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2500, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceD8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2600, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceF8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2700, - 0, 0, pbn_b0_8_115200 }, - { /* IQ Express D1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3000, - 0, 0, pbn_b0_1_115200 }, - { /* IQ Express F1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3100, - 0, 0, pbn_b0_1_115200 }, - { /* IQ Express D2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3200, - 0, 0, pbn_b0_2_115200 }, - { /* IQ Express F2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3300, - 0, 0, pbn_b0_2_115200 }, - { /* IQ Express D4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3400, - 0, 0, pbn_b0_4_115200 }, - { /* IQ Express F4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3500, - 0, 0, pbn_b0_4_115200 }, - { /* IQ Express D8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3C00, - 0, 0, pbn_b0_8_115200 }, - { /* IQ Express F8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3D00, - 0, 0, pbn_b0_8_115200 }, - - - /* - * PA Semi PA6T-1682M on-chip UART - */ - { PCI_VENDOR_ID_PASEMI, 0xa004, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_pasemi_1682M }, - - /* - * National Instruments - */ - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_16_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_16_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_8 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_8 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_16 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_16 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - - /* - * ADDI-DATA GmbH communication cards - */ - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA_OLD, - PCI_DEVICE_ID_ADDIDATA_APCI7800, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b1_8_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7800_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_8_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7500, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_4_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7420, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_2_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7300, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_1_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7800, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_8_3906250 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, - PCI_VENDOR_ID_IBM, 0x0299, - 0, 0, pbn_b0_bt_2_115200 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, - 0xA000, 0x1000, - 0, 0, pbn_b0_1_115200 }, - - /* - * Best Connectivity PCI Multi I/O cards - */ - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, - 0xA000, 0x1000, - 0, 0, pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, - 0xA000, 0x3004, - 0, 0, pbn_b0_bt_4_115200 }, - /* Intel CE4100 */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ce4100_1_115200 }, - - - /* - * These entries match devices with class COMMUNICATION_SERIAL, - * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL - */ - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, - 0xffff00, pbn_default }, - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_MODEM << 8, - 0xffff00, pbn_default }, - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, - 0xffff00, pbn_default }, - { 0, } -}; - -static struct pci_driver serial_pci_driver = { - .name = "serial", - .probe = pciserial_init_one, - .remove = __devexit_p(pciserial_remove_one), -#ifdef CONFIG_PM - .suspend = pciserial_suspend_one, - .resume = pciserial_resume_one, -#endif - .id_table = serial_pci_tbl, -}; - -static int __init serial8250_pci_init(void) -{ - return pci_register_driver(&serial_pci_driver); -} - -static void __exit serial8250_pci_exit(void) -{ - pci_unregister_driver(&serial_pci_driver); -} - -module_init(serial8250_pci_init); -module_exit(serial8250_pci_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); -MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c deleted file mode 100644 index 4822cb5..0000000 --- a/drivers/serial/8250_pnp.c +++ /dev/null @@ -1,523 +0,0 @@ -/* - * linux/drivers/char/8250_pnp.c - * - * Probe module for 8250/16550-type ISAPNP serial ports. - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * Ported to the Linux PnP Layer - (C) Adam Belay. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8250.h" - -#define UNKNOWN_DEV 0x3000 - - -static const struct pnp_device_id pnp_dev_table[] = { - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "AAC000F", 0 }, - /* Anchor Datacomm BV */ - /* SXPro 144 External Data Fax Modem Plug & Play */ - { "ADC0001", 0 }, - /* SXPro 288 External Data Fax Modem Plug & Play */ - { "ADC0002", 0 }, - /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ - { "AEI0250", 0 }, - /* Actiontec ISA PNP 56K X2 Fax Modem */ - { "AEI1240", 0 }, - /* Rockwell 56K ACF II Fax+Data+Voice Modem */ - { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, - /* AZT3005 PnP SOUND DEVICE */ - { "AZT4001", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, - /* Boca Research */ - /* Boca Complete Ofc Communicator 14.4 Data-FAX */ - { "BRI0A49", 0 }, - /* Boca Research 33,600 ACF Modem */ - { "BRI1400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI3400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI0A49", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, - /* Computer Peripherals Inc */ - /* EuroViVa CommCenter-33.6 SP PnP */ - { "CPI4050", 0 }, - /* Creative Labs */ - /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ - { "CTL3001", 0 }, - /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ - { "CTL3011", 0 }, - /* Davicom ISA 33.6K Modem */ - { "DAV0336", 0 }, - /* Creative */ - /* Creative Modem Blaster Flash56 DI5601-1 */ - { "DMB1032", 0 }, - /* Creative Modem Blaster V.90 DI5660 */ - { "DMB2001", 0 }, - /* E-Tech */ - /* E-Tech CyberBULLET PC56RVP */ - { "ETT0002", 0 }, - /* FUJITSU */ - /* Fujitsu 33600 PnP-I2 R Plug & Play */ - { "FUJ0202", 0 }, - /* Fujitsu FMV-FX431 Plug & Play */ - { "FUJ0205", 0 }, - /* Fujitsu 33600 PnP-I4 R Plug & Play */ - { "FUJ0206", 0 }, - /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ - { "FUJ0209", 0 }, - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "GVC000F", 0 }, - /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ - { "GVC0303", 0 }, - /* Hayes */ - /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ - { "HAY0001", 0 }, - /* Hayes Optima 336 V.34 + FAX + Voice PnP */ - { "HAY000C", 0 }, - /* Hayes Optima 336B V.34 + FAX + Voice PnP */ - { "HAY000D", 0 }, - /* Hayes Accura 56K Ext Fax Modem PnP */ - { "HAY5670", 0 }, - /* Hayes Accura 56K Ext Fax Modem PnP */ - { "HAY5674", 0 }, - /* Hayes Accura 56K Fax Modem PnP */ - { "HAY5675", 0 }, - /* Hayes 288, V.34 + FAX */ - { "HAYF000", 0 }, - /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ - { "HAYF001", 0 }, - /* IBM */ - /* IBM Thinkpad 701 Internal Modem Voice */ - { "IBM0033", 0 }, - /* Intertex */ - /* Intertex 28k8 33k6 Voice EXT PnP */ - { "IXDC801", 0 }, - /* Intertex 33k6 56k Voice EXT PnP */ - { "IXDC901", 0 }, - /* Intertex 28k8 33k6 Voice SP EXT PnP */ - { "IXDD801", 0 }, - /* Intertex 33k6 56k Voice SP EXT PnP */ - { "IXDD901", 0 }, - /* Intertex 28k8 33k6 Voice SP INT PnP */ - { "IXDF401", 0 }, - /* Intertex 28k8 33k6 Voice SP EXT PnP */ - { "IXDF801", 0 }, - /* Intertex 33k6 56k Voice SP EXT PnP */ - { "IXDF901", 0 }, - /* Kortex International */ - /* KORTEX 28800 Externe PnP */ - { "KOR4522", 0 }, - /* KXPro 33.6 Vocal ASVD PnP */ - { "KORF661", 0 }, - /* Lasat */ - /* LASAT Internet 33600 PnP */ - { "LAS4040", 0 }, - /* Lasat Safire 560 PnP */ - { "LAS4540", 0 }, - /* Lasat Safire 336 PnP */ - { "LAS5440", 0 }, - /* Microcom, Inc. */ - /* Microcom TravelPorte FAST V.34 Plug & Play */ - { "MNP0281", 0 }, - /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ - { "MNP0336", 0 }, - /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ - { "MNP0339", 0 }, - /* Microcom DeskPorte 28.8P Plug & Play */ - { "MNP0342", 0 }, - /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ - { "MNP0500", 0 }, - /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ - { "MNP0501", 0 }, - /* Microcom DeskPorte 28.8S Internal Plug & Play */ - { "MNP0502", 0 }, - /* Motorola */ - /* Motorola BitSURFR Plug & Play */ - { "MOT1105", 0 }, - /* Motorola TA210 Plug & Play */ - { "MOT1111", 0 }, - /* Motorola HMTA 200 (ISDN) Plug & Play */ - { "MOT1114", 0 }, - /* Motorola BitSURFR Plug & Play */ - { "MOT1115", 0 }, - /* Motorola Lifestyle 28.8 Internal */ - { "MOT1190", 0 }, - /* Motorola V.3400 Plug & Play */ - { "MOT1501", 0 }, - /* Motorola Lifestyle 28.8 V.34 Plug & Play */ - { "MOT1502", 0 }, - /* Motorola Power 28.8 V.34 Plug & Play */ - { "MOT1505", 0 }, - /* Motorola ModemSURFR External 28.8 Plug & Play */ - { "MOT1509", 0 }, - /* Motorola Premier 33.6 Desktop Plug & Play */ - { "MOT150A", 0 }, - /* Motorola VoiceSURFR 56K External PnP */ - { "MOT150F", 0 }, - /* Motorola ModemSURFR 56K External PnP */ - { "MOT1510", 0 }, - /* Motorola ModemSURFR 56K Internal PnP */ - { "MOT1550", 0 }, - /* Motorola ModemSURFR Internal 28.8 Plug & Play */ - { "MOT1560", 0 }, - /* Motorola Premier 33.6 Internal Plug & Play */ - { "MOT1580", 0 }, - /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ - { "MOT15B0", 0 }, - /* Motorola VoiceSURFR 56K Internal PnP */ - { "MOT15F0", 0 }, - /* Com 1 */ - /* Deskline K56 Phone System PnP */ - { "MVX00A1", 0 }, - /* PC Rider K56 Phone System PnP */ - { "MVX00F2", 0 }, - /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ - { "nEC8241", 0 }, - /* Pace 56 Voice Internal Plug & Play Modem */ - { "PMC2430", 0 }, - /* Generic */ - /* Generic standard PC COM port */ - { "PNP0500", 0 }, - /* Generic 16550A-compatible COM port */ - { "PNP0501", 0 }, - /* Compaq 14400 Modem */ - { "PNPC000", 0 }, - /* Compaq 2400/9600 Modem */ - { "PNPC001", 0 }, - /* Dial-Up Networking Serial Cable between 2 PCs */ - { "PNPC031", 0 }, - /* Dial-Up Networking Parallel Cable between 2 PCs */ - { "PNPC032", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC100", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC101", 0 }, - /* Standard 28800 bps Modem*/ - { "PNPC102", 0 }, - /* Standard Modem*/ - { "PNPC103", 0 }, - /* Standard 9600 bps Modem*/ - { "PNPC104", 0 }, - /* Standard 14400 bps Modem*/ - { "PNPC105", 0 }, - /* Standard 28800 bps Modem*/ - { "PNPC106", 0 }, - /* Standard Modem */ - { "PNPC107", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC108", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC109", 0 }, - /* Standard 28800 bps Modem */ - { "PNPC10A", 0 }, - /* Standard Modem */ - { "PNPC10B", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC10C", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC10D", 0 }, - /* Standard 28800 bps Modem */ - { "PNPC10E", 0 }, - /* Standard Modem */ - { "PNPC10F", 0 }, - /* Standard PCMCIA Card Modem */ - { "PNP2000", 0 }, - /* Rockwell */ - /* Modular Technology */ - /* Rockwell 33.6 DPF Internal PnP */ - /* Modular Technology 33.6 Internal PnP */ - { "ROK0030", 0 }, - /* Kortex International */ - /* KORTEX 14400 Externe PnP */ - { "ROK0100", 0 }, - /* Rockwell 28.8 */ - { "ROK4120", 0 }, - /* Viking Components, Inc */ - /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ - { "ROK4920", 0 }, - /* Rockwell */ - /* British Telecom */ - /* Modular Technology */ - /* Rockwell 33.6 DPF External PnP */ - /* BT Prologue 33.6 External PnP */ - /* Modular Technology 33.6 External PnP */ - { "RSS00A0", 0 }, - /* Viking 56K FAX INT */ - { "RSS0262", 0 }, - /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ - { "RSS0250", 0 }, - /* SupraExpress 28.8 Data/Fax PnP modem */ - { "SUP1310", 0 }, - /* SupraExpress 336i PnP Voice Modem */ - { "SUP1381", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1421", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1590", 0 }, - /* SupraExpress 336i Sp ASVD */ - { "SUP1620", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1760", 0 }, - /* SupraExpress 56i Sp Intl */ - { "SUP2171", 0 }, - /* Phoebe Micro */ - /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ - { "TEX0011", 0 }, - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "UAC000F", 0 }, - /* 3Com Corp. */ - /* Gateway Telepath IIvi 33.6 */ - { "USR0000", 0 }, - /* U.S. Robotics Sporster 33.6K Fax INT PnP */ - { "USR0002", 0 }, - /* Sportster Vi 14.4 PnP FAX Voicemail */ - { "USR0004", 0 }, - /* U.S. Robotics 33.6K Voice INT PnP */ - { "USR0006", 0 }, - /* U.S. Robotics 33.6K Voice EXT PnP */ - { "USR0007", 0 }, - /* U.S. Robotics Courier V.Everything INT PnP */ - { "USR0009", 0 }, - /* U.S. Robotics 33.6K Voice INT PnP */ - { "USR2002", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR2070", 0 }, - /* U.S. Robotics 56K Voice EXT PnP */ - { "USR2080", 0 }, - /* U.S. Robotics 56K FAX INT */ - { "USR3031", 0 }, - /* U.S. Robotics 56K FAX INT */ - { "USR3050", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR3070", 0 }, - /* U.S. Robotics 56K Voice EXT PnP */ - { "USR3080", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR3090", 0 }, - /* U.S. Robotics 56K Message */ - { "USR9100", 0 }, - /* U.S. Robotics 56K FAX EXT PnP*/ - { "USR9160", 0 }, - /* U.S. Robotics 56K FAX INT PnP*/ - { "USR9170", 0 }, - /* U.S. Robotics 56K Voice EXT PnP*/ - { "USR9180", 0 }, - /* U.S. Robotics 56K Voice INT PnP*/ - { "USR9190", 0 }, - /* Wacom tablets */ - { "WACFXXX", 0 }, - /* Compaq touchscreen */ - { "FPI2002", 0 }, - /* Fujitsu Stylistic touchscreens */ - { "FUJ02B2", 0 }, - { "FUJ02B3", 0 }, - /* Fujitsu Stylistic LT touchscreens */ - { "FUJ02B4", 0 }, - /* Passive Fujitsu Stylistic touchscreens */ - { "FUJ02B6", 0 }, - { "FUJ02B7", 0 }, - { "FUJ02B8", 0 }, - { "FUJ02B9", 0 }, - { "FUJ02BC", 0 }, - /* Fujitsu Wacom Tablet PC device */ - { "FUJ02E5", 0 }, - /* Fujitsu P-series tablet PC device */ - { "FUJ02E6", 0 }, - /* Fujitsu Wacom 2FGT Tablet PC device */ - { "FUJ02E7", 0 }, - /* Fujitsu Wacom 1FGT Tablet PC device */ - { "FUJ02E9", 0 }, - /* - * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in - * disguise) - */ - { "LTS0001", 0 }, - /* Rockwell's (PORALiNK) 33600 INT PNP */ - { "WCI0003", 0 }, - /* Unknown PnP modems */ - { "PNPCXXX", UNKNOWN_DEV }, - /* More unknown PnP modems */ - { "PNPDXXX", UNKNOWN_DEV }, - { "", 0 } -}; - -MODULE_DEVICE_TABLE(pnp, pnp_dev_table); - -static char *modem_names[] __devinitdata = { - "MODEM", "Modem", "modem", "FAX", "Fax", "fax", - "56K", "56k", "K56", "33.6", "28.8", "14.4", - "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", - "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL -}; - -static int __devinit check_name(char *name) -{ - char **tmp; - - for (tmp = modem_names; *tmp; tmp++) - if (strstr(name, *tmp)) - return 1; - - return 0; -} - -static int __devinit check_resources(struct pnp_dev *dev) -{ - resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; - int i; - - for (i = 0; i < ARRAY_SIZE(base); i++) { - if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) - return 1; - } - - return 0; -} - -/* - * Given a complete unknown PnP device, try to use some heuristics to - * detect modems. Currently use such heuristic set: - * - dev->name or dev->bus->name must contain "modem" substring; - * - device must have only one IO region (8 byte long) with base address - * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. - * - * Such detection looks very ugly, but can detect at least some of numerous - * PnP modems, alternatively we must hardcode all modems in pnp_devices[] - * table. - */ -static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) -{ - if (!(check_name(pnp_dev_name(dev)) || - (dev->card && check_name(dev->card->name)))) - return -ENODEV; - - if (check_resources(dev)) - return 0; - - return -ENODEV; -} - -static int __devinit -serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) -{ - struct uart_port port; - int ret, line, flags = dev_id->driver_data; - - if (flags & UNKNOWN_DEV) { - ret = serial_pnp_guess_board(dev, &flags); - if (ret < 0) - return ret; - } - - memset(&port, 0, sizeof(struct uart_port)); - if (pnp_irq_valid(dev, 0)) - port.irq = pnp_irq(dev, 0); - if (pnp_port_valid(dev, 0)) { - port.iobase = pnp_port_start(dev, 0); - port.iotype = UPIO_PORT; - } else if (pnp_mem_valid(dev, 0)) { - port.mapbase = pnp_mem_start(dev, 0); - port.iotype = UPIO_MEM; - port.flags = UPF_IOREMAP; - } else - return -ENODEV; - -#ifdef SERIAL_DEBUG_PNP - printk(KERN_DEBUG - "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", - port.iobase, port.mapbase, port.irq, port.iotype); -#endif - - port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) - port.flags |= UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &dev->dev; - - line = serial8250_register_port(&port); - if (line < 0) - return -ENODEV; - - pnp_set_drvdata(dev, (void *)((long)line + 1)); - return 0; -} - -static void __devexit serial_pnp_remove(struct pnp_dev *dev) -{ - long line = (long)pnp_get_drvdata(dev); - if (line) - serial8250_unregister_port(line - 1); -} - -#ifdef CONFIG_PM -static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) -{ - long line = (long)pnp_get_drvdata(dev); - - if (!line) - return -ENODEV; - serial8250_suspend_port(line - 1); - return 0; -} - -static int serial_pnp_resume(struct pnp_dev *dev) -{ - long line = (long)pnp_get_drvdata(dev); - - if (!line) - return -ENODEV; - serial8250_resume_port(line - 1); - return 0; -} -#else -#define serial_pnp_suspend NULL -#define serial_pnp_resume NULL -#endif /* CONFIG_PM */ - -static struct pnp_driver serial_pnp_driver = { - .name = "serial", - .probe = serial_pnp_probe, - .remove = __devexit_p(serial_pnp_remove), - .suspend = serial_pnp_suspend, - .resume = serial_pnp_resume, - .id_table = pnp_dev_table, -}; - -static int __init serial8250_pnp_init(void) -{ - return pnp_register_driver(&serial_pnp_driver); -} - -static void __exit serial8250_pnp_exit(void) -{ - pnp_unregister_driver(&serial_pnp_driver); -} - -module_init(serial8250_pnp_init); -module_exit(serial8250_pnp_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig deleted file mode 100644 index c1df767..0000000 --- a/drivers/serial/Kconfig +++ /dev/null @@ -1,1598 +0,0 @@ -# -# Serial device configuration -# - -menu "Serial drivers" - depends on HAS_IOMEM - -# -# The new 8250/16550 serial drivers -config SERIAL_8250 - tristate "8250/16550 and compatible serial support" - select SERIAL_CORE - ---help--- - This selects whether you want to include the driver for the standard - serial ports. The standard answer is Y. People who might say N - here are those that are setting up dedicated Ethernet WWW/FTP - servers, or users that have one of the various bus mice instead of a - serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) - - To compile this driver as a module, choose M here: the - module will be called 8250. - [WARNING: Do not compile this driver as a module if you are using - non-standard serial ports, since the configuration information will - be lost when the driver is unloaded. This limitation may be lifted - in the future.] - - BTW1: If you have a mouseman serial mouse which is not recognized by - the X window system, try running gpm first. - - BTW2: If you intend to use a software modem (also called Winmodem) - under Linux, forget it. These modems are crippled and require - proprietary drivers which are only available under Windows. - - Most people will say Y or M here, so that they can use serial mice, - modems and similar devices connecting to the standard serial ports. - -config SERIAL_8250_CONSOLE - bool "Console on 8250/16550 and compatible serial port" - depends on SERIAL_8250=y - select SERIAL_CORE_CONSOLE - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (grub or lilo or loadlin) about how to pass options - to the kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - You can set that using a kernel command line option such as - "console=uart8250,io,0x3f8,9600n8" - "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when the corresponding - port is ready. - "earlycon=uart8250,io,0x3f8,9600n8" - "earlycon=uart8250,mmio,0xff5e0000,115200n8". - it will not only setup early console. - - If unsure, say N. - -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - -config SERIAL_8250_GSC - tristate - depends on SERIAL_8250 && GSC - default SERIAL_8250 - -config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EMBEDDED - depends on SERIAL_8250 && PCI - default SERIAL_8250 - help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. - -config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EMBEDDED - depends on SERIAL_8250 && PNP - default SERIAL_8250 - help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. - -config SERIAL_8250_HP300 - tristate - depends on SERIAL_8250 && HP300 - default SERIAL_8250 - -config SERIAL_8250_CS - tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 - ---help--- - Say Y here to enable support for 16-bit PCMCIA serial devices, - including serial port cards, modems, and the modem functions of - multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are - credit-card size devices often used with laptops.) - - To compile this driver as a module, choose M here: the - module will be called serial_cs. - - If unsure, say N. - -config SERIAL_8250_NR_UARTS - int "Maximum number of 8250/16550 serial ports" - depends on SERIAL_8250 - default "4" - help - Set this to the number of serial ports you want the driver - to support. This includes any ports discovered via ACPI or - PCI enumeration and any ports that may be added at run-time - via hot-plug, or any ISA multi-port serial cards. - -config SERIAL_8250_RUNTIME_UARTS - int "Number of 8250/16550 serial ports to register at runtime" - depends on SERIAL_8250 - range 0 SERIAL_8250_NR_UARTS - default "4" - help - Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overridden - with the module parameter "nr_uarts", or boot-time parameter - 8250.nr_uarts - -config SERIAL_8250_EXTENDED - bool "Extended 8250/16550 serial driver options" - depends on SERIAL_8250 - help - If you wish to use any non-standard features of the standard "dumb" - driver, say Y here. This includes HUB6 support, shared serial - interrupts, special multiport support, support for more than the - four COM 1/2/3/4 boards, etc. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial driver options. If unsure, say N. - -config SERIAL_8250_MANY_PORTS - bool "Support more than 4 legacy serial ports" - depends on SERIAL_8250_EXTENDED && !IA64 - help - Say Y here if you have dumb serial boards other than the four - standard COM 1/2/3/4 ports. This may happen if you have an AST - FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available - from ), or other custom - serial port hardware which acts similar to standard serial port - hardware. If you only use the standard COM 1/2/3/4 ports, you can - say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. - -# -# Multi-port serial cards -# - -config SERIAL_8250_FOURPORT - tristate "Support Fourport cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an AST FourPort serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_fourport. - -config SERIAL_8250_ACCENT - tristate "Support Accent cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an Accent Async serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_accent. - -config SERIAL_8250_BOCA - tristate "Support Boca cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, available from - - To compile this driver as a module, choose M here: the module - will be called 8250_boca. - -config SERIAL_8250_EXAR_ST16C554 - tristate "Support Exar ST16C554/554D Quad UART" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - The Uplogix Envoy TU301 uses this Exar Quad UART. If you are - tinkering with your Envoy TU301, or have a machine with this UART, - say Y here. - - To compile this driver as a module, choose M here: the module - will be called 8250_exar_st16c554. - -config SERIAL_8250_HUB6 - tristate "Support Hub6 cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a HUB6 serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_hub6. - -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - -config SERIAL_8250_MCA - tristate "Support 8250-type ports on MCA buses" - depends on SERIAL_8250 != n && MCA - help - Say Y here if you have a MCA serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_mca. - -config SERIAL_8250_ACORN - tristate "Acorn expansion card serial port support" - depends on ARCH_ACORN && SERIAL_8250 - help - If you have an Atomwide Serial card or Serial Port card for an Acorn - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - -comment "Non-8250 serial port support" - -config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a - Cirrus Logic EP93xx CPU, say Y or M here. - - If unsure, say N. - -config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_AMBA_PL011 - tristate "ARM AMBA PL011 serial port support" - depends on ARM_AMBA - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have - an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M - here. - - If unsure, say N. - -config SERIAL_AMBA_PL011_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL011=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAMA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SB1250_DUART - tristate "BCM1xxx on-chip DUART serial support" - depends on SIBYTE_SB1xxx_SOC=y - select SERIAL_CORE - default y - ---help--- - Support for the asynchronous serial interface (DUART) included in - the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that - the letter D in DUART stands for "dual", which is how the device - is implemented. Depending on the SOC configuration there may be - one or more DUARTs available of which all are handled. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called sb1250-duart. - -config SERIAL_SB1250_DUART_CONSOLE - bool "Support for console on a BCM1xxx DUART serial port" - depends on SERIAL_SB1250_DUART=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - If unsure, say Y. - -config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" - depends on (ARM && ARCH_AT91) || AVR32 - select SERIAL_CORE - help - This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. - -config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" - depends on SERIAL_ATMEL=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system - console is the device which receives all kernel messages and - warnings and which allows logins in single user mode). - -config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" - depends on SERIAL_ATMEL - default y - help - Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to - actually use DMA transfers, make sure that the use_dma_tx - and use_dma_rx members in the atmel_uart_data struct is set - appropriately for each port. - - Note that break and error handling currently doesn't work - properly when DMA is enabled. Make sure that ports where - this matters don't use DMA. - -config SERIAL_ATMEL_TTYAT - bool "Install as device ttyATn instead of ttySn" - depends on SERIAL_ATMEL=y - help - Say Y here if you wish to have the internal AT91 / AT32 UARTs - appear as /dev/ttyATn (major 204, minor starting at 154) - instead of the normal /dev/ttySn (major 4, minor starting at - 64). This is necessary if you also want other UARTs, such as - external 8250/16C550 compatible UARTs. - The ttySn nodes are legally reserved for the 8250 serial driver - but are often misused by other serial drivers. - - To use this, you should create suitable ttyATn device nodes in - /dev/, and pass "console=ttyATn" to the kernel. - - Say Y if you have an external 8250/16C550 UART. If unsure, say N. - -config SERIAL_KS8695 - bool "Micrel KS8695 (Centaur) serial port support" - depends on ARCH_KS8695 - select SERIAL_CORE - help - This selects the Micrel Centaur KS8695 UART. Say Y here. - -config SERIAL_KS8695_CONSOLE - bool "Support for console on KS8695 (Centaur) serial port" - depends on SERIAL_KS8695=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a KS8695 (Centaur) UART as the - system console (the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode). - -config SERIAL_CLPS711X - tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X - select SERIAL_CORE - help - ::: To be written ::: - -config SERIAL_CLPS711X_CONSOLE - bool "Support for console on CLPS711X serial port" - depends on SERIAL_CLPS711X=y - select SERIAL_CORE_CONSOLE - help - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SAMSUNG - tristate "Samsung SoC serial support" - depends on ARM && PLAT_SAMSUNG - select SERIAL_CORE - help - Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, - providing /dev/ttySAC0, 1 and 2 (note, some machines may not - provide all of these ports, depending on how the serial port - pins are configured. - -config SERIAL_SAMSUNG_UARTS_4 - bool - depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 - help - Internal node for the common case of 4 Samsung compatible UARTs - -config SERIAL_SAMSUNG_UARTS - int - depends on ARM && PLAT_SAMSUNG - default 2 if ARCH_S3C2400 - default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 - default 3 - help - Select the number of available UART ports for the Samsung S3C - serial driver - -config SERIAL_SAMSUNG_DEBUG - bool "Samsung SoC serial debug" - depends on SERIAL_SAMSUNG && DEBUG_LL - help - Add support for debugging the serial driver. Since this is - generally being used as a console, we use our own output - routines that go via the low-level debug printascii() - function. - -config SERIAL_SAMSUNG_CONSOLE - bool "Support for console on Samsung SoC serial port" - depends on SERIAL_SAMSUNG=y - select SERIAL_CORE_CONSOLE - help - Allow selection of the S3C24XX on-board serial ports for use as - an virtual console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySACx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_S3C2400 - tristate "Samsung S3C2410 Serial port support" - depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 - default y if CPU_S3C2400 - help - Serial port support for the Samsung S3C2400 SoC - -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C24A0 - tristate "Samsung S3C24A0 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C24A0 - default y if CPU_S3C24A0 - help - Serial port support for the Samsung S3C24A0 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - -config SERIAL_MAX3100 - tristate "MAX3100 support" - depends on SPI - select SERIAL_CORE - help - MAX3100 chip support - -config SERIAL_MAX3107 - tristate "MAX3107 support" - depends on SPI - select SERIAL_CORE - help - MAX3107 chip support - -config SERIAL_MAX3107_AAVA - tristate "MAX3107 AAVA platform support" - depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB - select SERIAL_CORE - help - Support for the MAX3107 chip configuration found on the AAVA - platform. Includes the extra initialisation and GPIO support - neded for this device. - -config SERIAL_DZ - bool "DECstation DZ serial driver" - depends on MACH_DECSTATION && 32BIT - select SERIAL_CORE - default y - ---help--- - DZ11-family serial controllers for DECstations and VAXstations, - including the DC7085, M7814, and M7819. - -config SERIAL_DZ_CONSOLE - bool "Support console on DECstation DZ serial driver" - depends on SERIAL_DZ=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS3 as the serial console on - DECstations that use this driver. - - If unsure, say Y. - -config SERIAL_ZS - tristate "DECstation Z85C30 serial support" - depends on MACH_DECSTATION - select SERIAL_CORE - default y - ---help--- - Support for the Zilog 85C350 serial communications controller used - for serial ports in newer DECstation systems. These include the - DECsystem 5900 and all models of the DECstation and DECsystem 5000 - systems except from model 200. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called zs. - -config SERIAL_ZS_CONSOLE - bool "Support for console on a DECstation Z85C30 serial port" - depends on SERIAL_ZS=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS1 as the serial console on the - Maxine and ttyS3 on the others using this driver. - - If unsure, say Y. - -config SERIAL_21285 - tristate "DC21285 serial port support" - depends on ARM && FOOTBRIDGE - select SERIAL_CORE - help - If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ - PCI bridge you can enable its onboard serial port by enabling this - option. - -config SERIAL_21285_CONSOLE - bool "Console on DC21285 serial port" - depends on SERIAL_21285=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the 21285 footbridge you can - make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyFB". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MPSC - bool "Marvell MPSC serial port support" - depends on PPC32 && MV64X60 - select SERIAL_CORE - help - Say Y here if you want to use the Marvell MPSC serial controller. - -config SERIAL_MPSC_CONSOLE - bool "Support for console on Marvell MPSC serial port" - depends on SERIAL_MPSC - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console on a Marvell MPSC. - -config SERIAL_PXA - bool "PXA serial port support" - depends on ARCH_PXA || ARCH_MMP - select SERIAL_CORE - help - If you have a machine based on an Intel XScale PXA2xx CPU you - can enable its onboard serial ports by enabling this option. - -config SERIAL_PXA_CONSOLE - bool "Console on PXA serial port" - depends on SERIAL_PXA - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Intel XScale PXA - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SA1100 - bool "SA1100 serial port support" - depends on ARM && ARCH_SA1100 - select SERIAL_CORE - help - If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you - can enable its onboard serial port by enabling this option. - Please read for further - info. - -config SERIAL_SA1100_CONSOLE - bool "Console on SA1100 serial port" - depends on SERIAL_SA1100 - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the SA1100/SA1110 StrongARM - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MRST_MAX3110 - tristate "SPI UART driver for Max3110" - depends on SPI_DW_PCI - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - This is the UART protocol driver for the MAX3110 device on - the Intel Moorestown platform. On other systems use the max3100 - driver. - -config SERIAL_MFD_HSU - tristate "Medfield High Speed UART support" - depends on PCI - select SERIAL_CORE - -config SERIAL_MFD_HSU_CONSOLE - boolean "Medfile HSU serial console support" - depends on SERIAL_MFD_HSU=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN - tristate "Blackfin serial port support" - depends on BLACKFIN - select SERIAL_CORE - select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) - help - Add support for the built-in UARTs on the Blackfin. - - To compile this driver as a module, choose M here: the - module will be called bfin_5xx. - -config SERIAL_BFIN_CONSOLE - bool "Console on Blackfin serial port" - depends on SERIAL_BFIN=y - select SERIAL_CORE_CONSOLE - -choice - prompt "UART Mode" - depends on SERIAL_BFIN - default SERIAL_BFIN_DMA - help - This driver supports the built-in serial ports of the Blackfin family - of CPUs - -config SERIAL_BFIN_DMA - bool "DMA mode" - depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n - help - This driver works under DMA mode. If this option is selected, the - blackfin simple dma driver is also enabled. - -config SERIAL_BFIN_PIO - bool "PIO mode" - help - This driver works under PIO mode. - -endchoice - -config SERIAL_BFIN_UART0 - bool "Enable UART0" - depends on SERIAL_BFIN - help - Enable UART0 - -config BFIN_UART0_CTSRTS - bool "Enable UART0 hardware flow control" - depends on SERIAL_BFIN_UART0 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART1 - bool "Enable UART1" - depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) - help - Enable UART1 - -config BFIN_UART1_CTSRTS - bool "Enable UART1 hardware flow control" - depends on SERIAL_BFIN_UART1 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART2 - bool "Enable UART2" - depends on SERIAL_BFIN && (BF54x || BF538 || BF539) - help - Enable UART2 - -config BFIN_UART2_CTSRTS - bool "Enable UART2 hardware flow control" - depends on SERIAL_BFIN_UART2 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART3 - bool "Enable UART3" - depends on SERIAL_BFIN && (BF54x) - help - Enable UART3 - -config BFIN_UART3_CTSRTS - bool "Enable UART3 hardware flow control" - depends on SERIAL_BFIN_UART3 - help - Enable hardware flow control in the driver. - -config SERIAL_IMX - bool "IMX serial port support" - depends on ARM && (ARCH_IMX || ARCH_MXC) - select SERIAL_CORE - select RATIONAL - help - If you have a machine based on a Motorola IMX CPU you - can enable its onboard serial port by enabling this option. - -config SERIAL_IMX_CONSOLE - bool "Console on IMX serial port" - depends on SERIAL_IMX - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Motorola IMX - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_UARTLITE - tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE - select SERIAL_CORE - help - Say Y here if you want to use the Xilinx uartlite serial controller. - - To compile this driver as a module, choose M here: the - module will be called uartlite. - -config SERIAL_UARTLITE_CONSOLE - bool "Support for console on Xilinx uartlite serial port" - depends on SERIAL_UARTLITE=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a Xilinx uartlite as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - -config SERIAL_SUNCORE - bool - depends on SPARC - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config SERIAL_SUNZILOG - tristate "Sun Zilog8530 serial support" - depends on SPARC - help - This driver supports the Zilog8530 serial ports found on many Sparc - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_SUNZILOG_CONSOLE - bool "Console on Sun Zilog8530 serial port" - depends on SERIAL_SUNZILOG=y - help - If you would like to be able to use the Zilog8530 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNSU - tristate "Sun SU serial support" - depends on SPARC && PCI - help - This driver supports the 8250 serial ports that run the keyboard and - mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able - to these serial ports. - -config SERIAL_SUNSU_CONSOLE - bool "Console on Sun SU serial port" - depends on SERIAL_SUNSU=y - help - If you would like to be able to use the SU serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_MUX - tristate "Serial MUX support" - depends on GSC - select SERIAL_CORE - default y - ---help--- - Saying Y here will enable the hardware MUX serial driver for - the Nova, K class systems and D class with a 'remote control card'. - The hardware MUX is not 8250/16550 compatible therefore the - /dev/ttyB0 device is shared between the Serial MUX and the PDC - software console. The following steps need to be completed to use - the Serial MUX: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_MUX_CONSOLE - bool "Support for console on serial MUX" - depends on SERIAL_MUX=y - select SERIAL_CORE_CONSOLE - default y - -config PDC_CONSOLE - bool "PDC software console support" - depends on PARISC && !SERIAL_MUX && VT - default n - help - Saying Y here will enable the software based PDC console to be - used as the system console. This is useful for machines in - which the hardware based console has not been written yet. The - following steps must be competed to use the PDC console: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_SUNSAB - tristate "Sun Siemens SAB82532 serial support" - depends on SPARC && PCI - help - This driver supports the Siemens SAB82532 DUSCC serial ports on newer - (PCI) UltraSPARC systems. Say Y or M if you want to be able to these - serial ports. - -config SERIAL_SUNSAB_CONSOLE - bool "Console on Sun Siemens SAB82532 serial port" - depends on SERIAL_SUNSAB=y - help - If you would like to be able to use the SAB82532 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNHV - bool "Sun4v Hypervisor Console support" - depends on SPARC64 - help - This driver supports the console device found on SUN4V Sparc - systems. Say Y if you want to be able to use this device. - -config SERIAL_IP22_ZILOG - tristate "SGI Zilog8530 serial support" - depends on SGI_HAS_ZILOG - select SERIAL_CORE - help - This driver supports the Zilog8530 serial ports found on SGI - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_IP22_ZILOG_CONSOLE - bool "Console on SGI Zilog8530 serial port" - depends on SERIAL_IP22_ZILOG=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI - tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) - select SERIAL_CORE - -config SERIAL_SH_SCI_NR_UARTS - int "Maximum number of SCI(F) serial ports" - depends on SERIAL_SH_SCI - default "2" - -config SERIAL_SH_SCI_CONSOLE - bool "Support for console on SuperH SCI(F)" - depends on SERIAL_SH_SCI=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI_DMA - bool "DMA support" - depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL - -config SERIAL_PNX8XXX - bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) - select SERIAL_CORE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial ports, say Y. Otherwise, say N. - -config SERIAL_PNX8XXX_CONSOLE - bool "Enable PNX8XX0 serial console" - depends on SERIAL_PNX8XXX - select SERIAL_CORE_CONSOLE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial console, say Y. Otherwise, say N. - -config SERIAL_CORE - tristate - -config SERIAL_CORE_CONSOLE - bool - -config CONSOLE_POLL - bool - -config SERIAL_68328 - bool "68328 serial support" - depends on M68328 || M68EZ328 || M68VZ328 - help - This driver supports the built-in serial port of the Motorola 68328 - (standard, EZ and VZ varieties). - -config SERIAL_68328_RTS_CTS - bool "Support RTS/CTS on 68328 serial port" - depends on SERIAL_68328 - -config SERIAL_MCF - bool "Coldfire serial support" - depends on COLDFIRE - select SERIAL_CORE - help - This serial driver supports the Freescale Coldfire serial ports. - -config SERIAL_MCF_BAUDRATE - int "Default baudrate for Coldfire serial ports" - depends on SERIAL_MCF - default 19200 - help - This setting lets you define what the default baudrate is for the - ColdFire serial ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_MCF_CONSOLE - bool "Coldfire serial console support" - depends on SERIAL_MCF - select SERIAL_CORE_CONSOLE - help - Enable a ColdFire internal serial port to be the system console. - -config SERIAL_68360_SMC - bool "68360 SMC uart support" - depends on M68360 - help - This driver supports the SMC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360_SCC - bool "68360 SCC uart support" - depends on M68360 - help - This driver supports the SCC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360 - bool - depends on SERIAL_68360_SMC || SERIAL_68360_SCC - default y - -config SERIAL_PMACZILOG - tristate "Mac or PowerMac z85c30 ESCC support" - depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) - select SERIAL_CORE - help - This driver supports the Zilog z85C30 serial ports found on - (Power)Mac machines. - Say Y or M if you want to be able to these serial ports. - -config SERIAL_PMACZILOG_TTYS - bool "Use ttySn device nodes for Zilog z85c30" - depends on SERIAL_PMACZILOG - help - The pmac_zilog driver for the z85C30 chip on many powermacs - historically used the device numbers for /dev/ttySn. The - 8250 serial port driver also uses these numbers, which means - the two drivers being unable to coexist; you could not use - both z85C30 and 8250 type ports at the same time. - - If this option is not selected, the pmac_zilog driver will - use the device numbers allocated for /dev/ttyPZn. This allows - the pmac_zilog and 8250 drivers to co-exist, but may cause - existing userspace setups to break. Programs that need to - access the built-in serial ports on powermacs will need to - be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. - - If you enable this option, any z85c30 ports in the system will - be registered as ttyS0 onwards as in the past, and you will be - unable to use the 8250 module for PCMCIA or other 16C550-style - UARTs. - - Say N unless you need the z85c30 ports on your (Power)Mac - to appear as /dev/ttySn. - -config SERIAL_PMACZILOG_CONSOLE - bool "Console on Mac or PowerMac z85c30 serial port" - depends on SERIAL_PMACZILOG=y - select SERIAL_CORE_CONSOLE - help - If you would like to be able to use the z85c30 serial port - on your (Power)Mac as the console, you can do so by answering - Y to this option. - -config SERIAL_LH7A40X - tristate "Sharp LH7A40X embedded UART support" - depends on ARM && ARCH_LH7A40X - select SERIAL_CORE - help - This enables support for the three on-board UARTs of the - Sharp LH7A40X series CPUs. Choose Y or M. - -config SERIAL_LH7A40X_CONSOLE - bool "Support for console on Sharp LH7A40X serial port" - depends on SERIAL_LH7A40X=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use one of the serial ports as the - system console--the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode. - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the default system console, but - you can alter that using a kernel command line, for example - "console=ttyAM1". - -config SERIAL_CPM - tristate "CPM SCC/SMC serial port support" - depends on CPM2 || 8xx - select SERIAL_CORE - help - This driver supports the SCC and SMC serial ports on Motorola - embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) - -config SERIAL_CPM_CONSOLE - bool "Support for console on CPM SCC/SMC serial port" - depends on SERIAL_CPM=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a SCC or SMC CPM UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCPM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SGI_L1_CONSOLE - bool "SGI Altix L1 serial console support" - depends on IA64_GENERIC || IA64_SGI_SN2 - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - If you have an SGI Altix and you would like to use the system - controller serial port as your console (you want this!), - say Y. Otherwise, say N. - -config SERIAL_MPC52xx - tristate "Freescale MPC52xx/MPC512x family PSC serial support" - depends on PPC_MPC52xx || PPC_MPC512x - select SERIAL_CORE - help - This driver supports MPC52xx and MPC512x PSC serial ports. If you would - like to use them, you must answer Y or M to this option. Note that - for use as console, it must be included in kernel and not as a - module. - -config SERIAL_MPC52xx_CONSOLE - bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" - depends on SERIAL_MPC52xx=y - select SERIAL_CORE_CONSOLE - help - Select this options if you'd like to use one of the PSC serial port - of the Freescale MPC52xx family as a console. - -config SERIAL_MPC52xx_CONSOLE_BAUD - int "Freescale MPC52xx/MPC512x family PSC serial port baud" - depends on SERIAL_MPC52xx_CONSOLE=y - default "9600" - help - Select the MPC52xx console baud rate. - This value is only used if the bootloader doesn't pass in the - console baudrate - -config SERIAL_ICOM - tristate "IBM Multiport Serial Adapter" - depends on PCI && (PPC_ISERIES || PPC_PSERIES) - select SERIAL_CORE - select FW_LOADER - help - This driver is for a family of multiport serial adapters - including 2 port RVX, 2 port internal modem, 4 port internal - modem and a split 1 port RVX and 1 port internal modem. - - This driver can also be built as a module. If so, the module - will be called icom. - -config SERIAL_M32R_SIO - bool "M32R SIO I/F" - depends on M32R - default y - select SERIAL_CORE - help - Say Y here if you want to use the M32R serial controller. - -config SERIAL_M32R_SIO_CONSOLE - bool "use SIO console" - depends on SERIAL_M32R_SIO=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console. - - If you use an M3T-M32700UT or an OPSPUT platform, - please say also y for SERIAL_M32R_PLDSIO. - -config SERIAL_M32R_PLDSIO - bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) - default n - help - Say Y here if you want to use the M32R serial controller - on a PLD (Programmable Logic Device). - - If you use an M3T-M32700UT or an OPSPUT platform, - please say Y. - -config SERIAL_TXX9 - bool "TMPTX39XX/49XX SIO support" - depends on HAS_TXX9_SERIAL - select SERIAL_CORE - default y - -config HAS_TXX9_SERIAL - bool - -config SERIAL_TXX9_NR_UARTS - int "Maximum number of TMPTX39XX/49XX SIO ports" - depends on SERIAL_TXX9 - default "6" - -config SERIAL_TXX9_CONSOLE - bool "TMPTX39XX/49XX SIO Console support" - depends on SERIAL_TXX9=y - select SERIAL_CORE_CONSOLE - -config SERIAL_TXX9_STDSERIAL - bool "TX39XX/49XX SIO act as standard serial" - depends on !SERIAL_8250 && SERIAL_TXX9 - -config SERIAL_VR41XX - tristate "NEC VR4100 series Serial Interface Unit support" - depends on CPU_VR41XX - select SERIAL_CORE - help - If you have a NEC VR4100 series processor and you want to use - Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) - (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. - -config SERIAL_VR41XX_CONSOLE - bool "Enable NEC VR4100 series Serial Interface Unit console" - depends on SERIAL_VR41XX=y - select SERIAL_CORE_CONSOLE - help - If you have a NEC VR4100 series processor and you want to use - a console on a serial port, say Y. Otherwise, say N. - -config SERIAL_JSM - tristate "Digi International NEO PCI Support" - depends on PCI - select SERIAL_CORE - help - This is a driver for Digi International's Neo series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports PCI boards only. - - If you have a card like this, say Y here, otherwise say N. - - To compile this driver as a module, choose M here: the - module will be called jsm. - -config SERIAL_SGI_IOC4 - tristate "SGI IOC4 controller serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC4 based Base IO card - and wish to use the serial ports on this card, say Y. - Otherwise, say N. - -config SERIAL_SGI_IOC3 - tristate "SGI Altix IOC3 serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC3 serial card, - say Y or M. Otherwise, say N. - -config SERIAL_MSM - bool "MSM on-chip serial port support" - depends on ARM && ARCH_MSM - select SERIAL_CORE - -config SERIAL_MSM_CONSOLE - bool "MSM serial console support" - depends on SERIAL_MSM=y - select SERIAL_CORE_CONSOLE - -config SERIAL_VT8500 - bool "VIA VT8500 on-chip serial port support" - depends on ARM && ARCH_VT8500 - select SERIAL_CORE - -config SERIAL_VT8500_CONSOLE - bool "VIA VT8500 serial console support" - depends on SERIAL_VT8500=y - select SERIAL_CORE_CONSOLE - -config SERIAL_NETX - tristate "NetX serial port support" - depends on ARM && ARCH_NETX - select SERIAL_CORE - help - If you have a machine based on a Hilscher NetX SoC you - can enable its onboard serial port by enabling this option. - - To compile this driver as a module, choose M here: the - module will be called netx-serial. - -config SERIAL_NETX_CONSOLE - bool "Console on NetX serial port" - depends on SERIAL_NETX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Hilscher NetX SoC - you can make it the console by answering Y to this option. - -config SERIAL_OF_PLATFORM - tristate "Serial port on Open Firmware platform bus" - depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL - help - If you have a PowerPC based system that has serial ports - on a platform specific bus, you should enable this option. - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -config SERIAL_OMAP - tristate "OMAP serial port support" - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_CORE - help - If you have a machine based on an Texas Instruments OMAP CPU you - can enable its onboard serial ports by enabling this option. - - By enabling this option you take advantage of dma feature available - with the omap-serial driver. DMA support can be enabled from platform - data. - -config SERIAL_OMAP_CONSOLE - bool "Console on OMAP serial port" - depends on SERIAL_OMAP - select SERIAL_CORE_CONSOLE - help - Select this option if you would like to use omap serial port as - console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyOx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_OF && PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - -config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE - select SERIAL_CORE - select FW_LOADER - default n - help - This driver supports the QE serial ports on Freescale embedded - PowerPC that contain a QUICC Engine. - -config SERIAL_SC26XX - tristate "SC2681/SC2692 serial port support" - depends on SNI_RM - select SERIAL_CORE - help - This is a driver for the onboard serial ports of - older RM400 machines. - -config SERIAL_SC26XX_CONSOLE - bool "Console on SC2681/SC2692 serial port" - depends on SERIAL_SC26XX - select SERIAL_CORE_CONSOLE - help - Support for Console on SC2681/SC2692 serial ports. - -config SERIAL_BFIN_SPORT - tristate "Blackfin SPORT emulate UART" - depends on BLACKFIN - select SERIAL_CORE - help - Enable SPORT emulate UART on Blackfin series. - - To compile this driver as a module, choose M here: the - module will be called bfin_sport_uart. - -config SERIAL_BFIN_SPORT_CONSOLE - bool "Console on Blackfin sport emulated uart" - depends on SERIAL_BFIN_SPORT=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN_SPORT0_UART - bool "Enable UART over SPORT0" - depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) - help - Enable UART over SPORT0 - -config SERIAL_BFIN_SPORT0_UART_CTSRTS - bool "Enable UART over SPORT0 hardware flow control" - depends on SERIAL_BFIN_SPORT0_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT1_UART - bool "Enable UART over SPORT1" - depends on SERIAL_BFIN_SPORT - help - Enable UART over SPORT1 - -config SERIAL_BFIN_SPORT1_UART_CTSRTS - bool "Enable UART over SPORT1 hardware flow control" - depends on SERIAL_BFIN_SPORT1_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT2_UART - bool "Enable UART over SPORT2" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT2 - -config SERIAL_BFIN_SPORT2_UART_CTSRTS - bool "Enable UART over SPORT2 hardware flow control" - depends on SERIAL_BFIN_SPORT2_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT3_UART - bool "Enable UART over SPORT3" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT3 - -config SERIAL_BFIN_SPORT3_UART_CTSRTS - bool "Enable UART over SPORT3 hardware flow control" - depends on SERIAL_BFIN_SPORT3_UART - help - Enable hardware flow control in the driver. - -config SERIAL_TIMBERDALE - tristate "Support for timberdale UART" - select SERIAL_CORE - ---help--- - Add support for UART controller on timberdale. - -config SERIAL_BCM63XX - tristate "bcm63xx serial port support" - select SERIAL_CORE - depends on BCM63XX - help - If you have a bcm63xx CPU, you can enable its onboard - serial port by enabling this options. - - To compile this driver as a module, choose M here: the - module will be called bcm963xx_uart. - -config SERIAL_BCM63XX_CONSOLE - bool "Console on bcm63xx serial port" - depends on SERIAL_BCM63XX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the bcm63xx CPU - you can make it the console by answering Y to this option. - -config SERIAL_GRLIB_GAISLER_APBUART - tristate "GRLIB APBUART serial support" - depends on OF - ---help--- - Add support for the GRLIB APBUART serial port. - -config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE - bool "Console on GRLIB APBUART serial port" - depends on SERIAL_GRLIB_GAISLER_APBUART=y - select SERIAL_CORE_CONSOLE - help - Support for running a console on the GRLIB APBUART - -config SERIAL_ALTERA_JTAGUART - tristate "Altera JTAG UART support" - select SERIAL_CORE - help - This driver supports the Altera JTAG UART port. - -config SERIAL_ALTERA_JTAGUART_CONSOLE - bool "Altera JTAG UART console support" - depends on SERIAL_ALTERA_JTAGUART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera JTAG UART port to be the system console. - -config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS - bool "Bypass output when no connection" - depends on SERIAL_ALTERA_JTAGUART_CONSOLE - select SERIAL_CORE_CONSOLE - help - Bypass console output and keep going even if there is no - JTAG terminal connection with the host. - -config SERIAL_ALTERA_UART - tristate "Altera UART support" - select SERIAL_CORE - help - This driver supports the Altera softcore UART port. - -config SERIAL_ALTERA_UART_MAXPORTS - int "Maximum number of Altera UART ports" - depends on SERIAL_ALTERA_UART - default 4 - help - This setting lets you define the maximum number of the Altera - UART ports. The usual default varies from board to board, and - this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_BAUDRATE - int "Default baudrate for Altera UART ports" - depends on SERIAL_ALTERA_UART - default 115200 - help - This setting lets you define what the default baudrate is for the - Altera UART ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_CONSOLE - bool "Altera UART console support" - depends on SERIAL_ALTERA_UART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera UART port to be the system console. - -config SERIAL_IFX6X60 - tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" - depends on GPIOLIB && SPI && EXPERIMENTAL - help - Support for the IFX6x60 modem devices on Intel MID platforms. - -config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES - select SERIAL_CORE - select PCH_DMA - help - This driver is for PCH(Platform controller Hub) UART of Intel EG20T - which is an IOH(Input/Output Hub) for x86 embedded processor. - Enabling PCH_DMA, this PCH UART works as DMA mode. -endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile deleted file mode 100644 index 8ea92e9..0000000 --- a/drivers/serial/Makefile +++ /dev/null @@ -1,94 +0,0 @@ -# -# Makefile for the kernel serial device drivers. -# - -obj-$(CONFIG_SERIAL_CORE) += serial_core.o -obj-$(CONFIG_SERIAL_21285) += 21285.o - -# These Sparc drivers have to appear before others such as 8250 -# which share ttySx minor node space. Otherwise console device -# names change and other unplesantries. -obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o -obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o -obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o -obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o -obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o - -obj-$(CONFIG_SERIAL_8250) += 8250.o -obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o -obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o -obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o -obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o -obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o -obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o -obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o -obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o -obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o -obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o -obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o -obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o -obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o -obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -obj-$(CONFIG_SERIAL_PXA) += pxa.o -obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o -obj-$(CONFIG_SERIAL_SA1100) += sa1100.o -obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o -obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o -obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o -obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o -obj-$(CONFIG_SERIAL_MAX3100) += max3100.o -obj-$(CONFIG_SERIAL_MAX3107) += max3107.o -obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o -obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o -obj-$(CONFIG_SERIAL_MUX) += mux.o -obj-$(CONFIG_SERIAL_68328) += 68328serial.o -obj-$(CONFIG_SERIAL_68360) += 68360serial.o -obj-$(CONFIG_SERIAL_MCF) += mcf.o -obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o -obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o -obj-$(CONFIG_SERIAL_DZ) += dz.o -obj-$(CONFIG_SERIAL_ZS) += zs.o -obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o -obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o -obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ -obj-$(CONFIG_SERIAL_IMX) += imx.o -obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o -obj-$(CONFIG_SERIAL_ICOM) += icom.o -obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o -obj-$(CONFIG_SERIAL_MPSC) += mpsc.o -obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o -obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o -obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o -obj-$(CONFIG_SERIAL_JSM) += jsm/ -obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o -obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o -obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o -obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o -obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o -obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o -obj-$(CONFIG_SERIAL_MSM) += msm_serial.o -obj-$(CONFIG_SERIAL_NETX) += netx-serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o -obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o -obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o -obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o -obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o -obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o -obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o -obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o -obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o -obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o -obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o -obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o -obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c deleted file mode 100644 index f9b49b5..0000000 --- a/drivers/serial/altera_jtaguart.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * altera_jtaguart.c -- Altera JTAG UART driver - * - * Based on mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * (C) Copyright 2008, Thomas Chou - * (C) Copyright 2010, Tobias Klauser - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "altera_jtaguart" - -/* - * Altera JTAG UART register definitions according to the Altera JTAG UART - * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf - */ - -#define ALTERA_JTAGUART_SIZE 8 - -#define ALTERA_JTAGUART_DATA_REG 0 - -#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF -#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000 -#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16 - -#define ALTERA_JTAGUART_CONTROL_REG 4 - -#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001 -#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002 -#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100 -#define ALTERA_JTAGUART_CONTROL_RI_OFF 8 -#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 -#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 -#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 - -/* - * Local per-uart structure. - */ -struct altera_jtaguart { - struct uart_port port; - unsigned int sigs; /* Local copy of line sigs */ - unsigned long imr; /* Local IMR mirror */ -}; - -static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) -{ - return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; -} - -static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs) -{ -} - -static void altera_jtaguart_start_tx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_stop_tx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_stop_rx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) -{ -} - -static void altera_jtaguart_enable_ms(struct uart_port *port) -{ -} - -static void altera_jtaguart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - /* Just copy the old termios settings back */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char ch, flag; - unsigned long status; - - while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) & - ALTERA_JTAGUART_DATA_RVALID_MSK) { - ch = status & ALTERA_JTAGUART_DATA_DATA_MSK; - flag = TTY_NORMAL; - port->icount.rx++; - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, 0, 0, ch, flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned int pending, count; - - if (port->x_char) { - /* Send special char - probably flow control */ - writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG); - port->x_char = 0; - port->icount.tx++; - return; - } - - pending = uart_circ_chars_pending(xmit); - if (pending > 0) { - count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> - ALTERA_JTAGUART_CONTROL_WSPACE_OFF; - if (count > pending) - count = pending; - if (count > 0) { - pending -= count; - while (count--) { - writel(xmit->buf[xmit->tail], - port->membase + ALTERA_JTAGUART_DATA_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - if (pending < WAKEUP_CHARS) - uart_write_wakeup(port); - } - } - - if (pending == 0) { - pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - } -} - -static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned int isr; - - isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >> - ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr; - - spin_lock(&port->lock); - - if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK) - altera_jtaguart_rx_chars(pp); - if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK) - altera_jtaguart_tx_chars(pp); - - spin_unlock(&port->lock); - - return IRQ_RETVAL(isr); -} - -static void altera_jtaguart_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ALTERA_JTAGUART; - - /* Clear mask, so no surprise interrupts. */ - writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static int altera_jtaguart_startup(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned long flags; - int ret; - - ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED, - DRV_NAME, port); - if (ret) { - pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " - "interrupt vector=%d\n", port->line, port->irq); - return ret; - } - - spin_lock_irqsave(&port->lock, flags); - - /* Enable RX interrupts now */ - pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -static void altera_jtaguart_shutdown(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - free_irq(port->irq, port); -} - -static const char *altera_jtaguart_type(struct uart_port *port) -{ - return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL; -} - -static int altera_jtaguart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void altera_jtaguart_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -static int altera_jtaguart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART) - return -EINVAL; - return 0; -} - -/* - * Define the basic serial functions we support. - */ -static struct uart_ops altera_jtaguart_ops = { - .tx_empty = altera_jtaguart_tx_empty, - .get_mctrl = altera_jtaguart_get_mctrl, - .set_mctrl = altera_jtaguart_set_mctrl, - .start_tx = altera_jtaguart_start_tx, - .stop_tx = altera_jtaguart_stop_tx, - .stop_rx = altera_jtaguart_stop_rx, - .enable_ms = altera_jtaguart_enable_ms, - .break_ctl = altera_jtaguart_break_ctl, - .startup = altera_jtaguart_startup, - .shutdown = altera_jtaguart_shutdown, - .set_termios = altera_jtaguart_set_termios, - .type = altera_jtaguart_type, - .request_port = altera_jtaguart_request_port, - .release_port = altera_jtaguart_release_port, - .config_port = altera_jtaguart_config_port, - .verify_port = altera_jtaguart_verify_port, -}; - -#define ALTERA_JTAGUART_MAXPORTS 1 -static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; - -#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) - -int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart - *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &altera_jtaguart_ops; - } - - return 0; -} - -#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) -static void altera_jtaguart_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; - unsigned long status; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { - if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); - return; /* no connection activity */ - } - spin_unlock_irqrestore(&port->lock, flags); - cpu_relax(); - spin_lock_irqsave(&port->lock, flags); - } - writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); - spin_unlock_irqrestore(&port->lock, flags); -} -#else -static void altera_jtaguart_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); - cpu_relax(); - spin_lock_irqsave(&port->lock, flags); - } - writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); - spin_unlock_irqrestore(&port->lock, flags); -} -#endif - -static void altera_jtaguart_console_write(struct console *co, const char *s, - unsigned int count) -{ - for (; count; count--, s++) { - altera_jtaguart_console_putc(co, *s); - if (*s == '\n') - altera_jtaguart_console_putc(co, '\r'); - } -} - -static int __init altera_jtaguart_console_setup(struct console *co, - char *options) -{ - struct uart_port *port; - - if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) - return -EINVAL; - port = &altera_jtaguart_ports[co->index].port; - if (port->membase == 0) - return -ENODEV; - return 0; -} - -static struct uart_driver altera_jtaguart_driver; - -static struct console altera_jtaguart_console = { - .name = "ttyJ", - .write = altera_jtaguart_console_write, - .device = uart_console_device, - .setup = altera_jtaguart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &altera_jtaguart_driver, -}; - -static int __init altera_jtaguart_console_init(void) -{ - register_console(&altera_jtaguart_console); - return 0; -} - -console_initcall(altera_jtaguart_console_init); - -#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) - -#else - -#define ALTERA_JTAGUART_CONSOLE NULL - -#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */ - -static struct uart_driver altera_jtaguart_driver = { - .owner = THIS_MODULE, - .driver_name = "altera_jtaguart", - .dev_name = "ttyJ", - .major = ALTERA_JTAGUART_MAJOR, - .minor = ALTERA_JTAGUART_MINOR, - .nr = ALTERA_JTAGUART_MAXPORTS, - .cons = ALTERA_JTAGUART_CONSOLE, -}; - -static int __devinit altera_jtaguart_probe(struct platform_device *pdev) -{ - struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; - - uart_add_one_port(&altera_jtaguart_driver, port); - } - - return 0; -} - -static int __devexit altera_jtaguart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { - port = &altera_jtaguart_ports[i].port; - if (port) - uart_remove_one_port(&altera_jtaguart_driver, port); - } - - return 0; -} - -static struct platform_driver altera_jtaguart_platform_driver = { - .probe = altera_jtaguart_probe, - .remove = __devexit_p(altera_jtaguart_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init altera_jtaguart_init(void) -{ - int rc; - - rc = uart_register_driver(&altera_jtaguart_driver); - if (rc) - return rc; - rc = platform_driver_register(&altera_jtaguart_platform_driver); - if (rc) { - uart_unregister_driver(&altera_jtaguart_driver); - return rc; - } - return 0; -} - -static void __exit altera_jtaguart_exit(void) -{ - platform_driver_unregister(&altera_jtaguart_platform_driver); - uart_unregister_driver(&altera_jtaguart_driver); -} - -module_init(altera_jtaguart_init); -module_exit(altera_jtaguart_exit); - -MODULE_DESCRIPTION("Altera JTAG UART driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c deleted file mode 100644 index 7212162..0000000 --- a/drivers/serial/altera_uart.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * altera_uart.c -- Altera UART driver - * - * Based on mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * (C) Copyright 2008, Thomas Chou - * (C) Copyright 2010, Tobias Klauser - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "altera_uart" -#define SERIAL_ALTERA_MAJOR 204 -#define SERIAL_ALTERA_MINOR 213 - -/* - * Altera UART register definitions according to the Nios UART datasheet: - * http://www.altera.com/literature/ds/ds_nios_uart.pdf - */ - -#define ALTERA_UART_SIZE 32 - -#define ALTERA_UART_RXDATA_REG 0 -#define ALTERA_UART_TXDATA_REG 4 -#define ALTERA_UART_STATUS_REG 8 -#define ALTERA_UART_CONTROL_REG 12 -#define ALTERA_UART_DIVISOR_REG 16 -#define ALTERA_UART_EOP_REG 20 - -#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ -#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ -#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ -#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ -#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ -#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ -#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ -#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ -#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ -#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ -#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ -#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ - - /* Enable interrupt on... */ -#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ -#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ -#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ -#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ -#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ -#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ -#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ -#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ -#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ - -#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ -#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ -#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ -#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ - -/* - * Local per-uart structure. - */ -struct altera_uart { - struct uart_port port; - struct timer_list tmr; - unsigned int sigs; /* Local copy of line sigs */ - unsigned short imr; /* Local IMR mirror */ -}; - -static u32 altera_uart_readl(struct uart_port *port, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); -} - -static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); -} - -static unsigned int altera_uart_tx_empty(struct uart_port *port) -{ - return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; -} - -static unsigned int altera_uart_get_mctrl(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int sigs; - - sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; - sigs |= (pp->sigs & TIOCM_RTS); - - return sigs; -} - -static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->sigs = sigs; - if (sigs & TIOCM_RTS) - pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_start_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_rx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_enable_ms(struct uart_port *port) -{ -} - -static void altera_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, baudclk; - - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - baudclk = port->uartclk / baud; - - if (old) - tty_termios_copy_hw(termios, old); - tty_termios_encode_baud_rate(termios, baud, baud); - - spin_lock_irqsave(&port->lock, flags); - uart_update_timeout(port, termios->c_cflag, baud); - altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_rx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char ch, flag; - unsigned short status; - - while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & - ALTERA_UART_STATUS_RRDY_MSK) { - ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); - flag = TTY_NORMAL; - port->icount.rx++; - - if (status & ALTERA_UART_STATUS_E_MSK) { - altera_uart_writel(port, status, - ALTERA_UART_STATUS_REG); - - if (status & ALTERA_UART_STATUS_BRK_MSK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & ALTERA_UART_STATUS_PE_MSK) { - port->icount.parity++; - } else if (status & ALTERA_UART_STATUS_ROE_MSK) { - port->icount.overrun++; - } else if (status & ALTERA_UART_STATUS_FE_MSK) { - port->icount.frame++; - } - - status &= port->read_status_mask; - - if (status & ALTERA_UART_STATUS_BRK_MSK) - flag = TTY_BREAK; - else if (status & ALTERA_UART_STATUS_PE_MSK) - flag = TTY_PARITY; - else if (status & ALTERA_UART_STATUS_FE_MSK) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, - flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -static void altera_uart_tx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - /* Send special char - probably flow control */ - altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); - port->x_char = 0; - port->icount.tx++; - return; - } - - while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK) { - if (xmit->head == xmit->tail) - break; - altera_uart_writel(port, xmit->buf[xmit->tail], - ALTERA_UART_TXDATA_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (xmit->head == xmit->tail) { - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - } -} - -static irqreturn_t altera_uart_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int isr; - - isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; - - spin_lock(&port->lock); - if (isr & ALTERA_UART_STATUS_RRDY_MSK) - altera_uart_rx_chars(pp); - if (isr & ALTERA_UART_STATUS_TRDY_MSK) - altera_uart_tx_chars(pp); - spin_unlock(&port->lock); - - return IRQ_RETVAL(isr); -} - -static void altera_uart_timer(unsigned long data) -{ - struct uart_port *port = (void *)data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - altera_uart_interrupt(0, port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); -} - -static void altera_uart_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ALTERA_UART; - - /* Clear mask, so no surprise interrupts. */ - altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); - /* Clear status register */ - altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); -} - -static int altera_uart_startup(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - int ret; - - if (!port->irq) { - setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); - return 0; - } - - ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED, - DRV_NAME, port); - if (ret) { - pr_err(DRV_NAME ": unable to attach Altera UART %d " - "interrupt vector=%d\n", port->line, port->irq); - return ret; - } - - spin_lock_irqsave(&port->lock, flags); - - /* Enable RX interrupts now */ - pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -static void altera_uart_shutdown(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - if (port->irq) - free_irq(port->irq, port); - else - del_timer_sync(&pp->tmr); -} - -static const char *altera_uart_type(struct uart_port *port) -{ - return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; -} - -static int altera_uart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void altera_uart_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -static int altera_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) - return -EINVAL; - return 0; -} - -/* - * Define the basic serial functions we support. - */ -static struct uart_ops altera_uart_ops = { - .tx_empty = altera_uart_tx_empty, - .get_mctrl = altera_uart_get_mctrl, - .set_mctrl = altera_uart_set_mctrl, - .start_tx = altera_uart_start_tx, - .stop_tx = altera_uart_stop_tx, - .stop_rx = altera_uart_stop_rx, - .enable_ms = altera_uart_enable_ms, - .break_ctl = altera_uart_break_ctl, - .startup = altera_uart_startup, - .shutdown = altera_uart_shutdown, - .set_termios = altera_uart_set_termios, - .type = altera_uart_type, - .request_port = altera_uart_request_port, - .release_port = altera_uart_release_port, - .config_port = altera_uart_config_port, - .verify_port = altera_uart_verify_port, -}; - -static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; - -#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) - -int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_uart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = platp[i].uartclk; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &altera_uart_ops; - port->private_data = platp; - } - - return 0; -} - -static void altera_uart_console_putc(struct uart_port *port, const char c) -{ - while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK)) - cpu_relax(); - - writel(c, port->membase + ALTERA_UART_TXDATA_REG); -} - -static void altera_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = &(altera_uart_ports + co->index)->port; - - for (; count; count--, s++) { - altera_uart_console_putc(port, *s); - if (*s == '\n') - altera_uart_console_putc(port, '\r'); - } -} - -static int __init altera_uart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - port = &altera_uart_ports[co->index].port; - if (!port->membase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver altera_uart_driver; - -static struct console altera_uart_console = { - .name = "ttyAL", - .write = altera_uart_console_write, - .device = uart_console_device, - .setup = altera_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &altera_uart_driver, -}; - -static int __init altera_uart_console_init(void) -{ - register_console(&altera_uart_console); - return 0; -} - -console_initcall(altera_uart_console_init); - -#define ALTERA_UART_CONSOLE (&altera_uart_console) - -#else - -#define ALTERA_UART_CONSOLE NULL - -#endif /* CONFIG_ALTERA_UART_CONSOLE */ - -/* - * Define the altera_uart UART driver structure. - */ -static struct uart_driver altera_uart_driver = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = "ttyAL", - .major = SERIAL_ALTERA_MAJOR, - .minor = SERIAL_ALTERA_MINOR, - .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, - .cons = ALTERA_UART_CONSOLE, -}; - -static int __devinit altera_uart_probe(struct platform_device *pdev) -{ - struct altera_uart_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - struct resource *res_mem; - struct resource *res_irq; - int i = pdev->id; - - /* -1 emphasizes that the platform must have one port, no .N suffix */ - if (i == -1) - i = 0; - - if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - - port = &altera_uart_ports[i].port; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem) - port->mapbase = res_mem->start; - else if (platp->mapbase) - port->mapbase = platp->mapbase; - else - return -EINVAL; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res_irq) - port->irq = res_irq->start; - else if (platp->irq) - port->irq = platp->irq; - - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - if (!port->membase) - return -ENOMEM; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->iotype = SERIAL_IO_MEM; - port->uartclk = platp->uartclk; - port->ops = &altera_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; - - uart_add_one_port(&altera_uart_driver, port); - - return 0; -} - -static int __devexit altera_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port = &altera_uart_ports[pdev->id].port; - - uart_remove_one_port(&altera_uart_driver, port); - return 0; -} - -static struct platform_driver altera_uart_platform_driver = { - .probe = altera_uart_probe, - .remove = __devexit_p(altera_uart_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, - }, -}; - -static int __init altera_uart_init(void) -{ - int rc; - - rc = uart_register_driver(&altera_uart_driver); - if (rc) - return rc; - rc = platform_driver_register(&altera_uart_platform_driver); - if (rc) { - uart_unregister_driver(&altera_uart_driver); - return rc; - } - return 0; -} - -static void __exit altera_uart_exit(void) -{ - platform_driver_unregister(&altera_uart_platform_driver); - uart_unregister_driver(&altera_uart_driver); -} - -module_init(altera_uart_init); -module_exit(altera_uart_exit); - -MODULE_DESCRIPTION("Altera UART driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c deleted file mode 100644 index 2904aa0..0000000 --- a/drivers/serial/amba-pl010.c +++ /dev/null @@ -1,825 +0,0 @@ -/* - * linux/drivers/char/amba.c - * - * Driver for AMBA serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This is a generic driver for ARM AMBA-type serial ports. They - * have a lot of 16550-like features, but are not register compatible. - * Note that although they do have CTS, DCD and DSR inputs, they do - * not have an RI input, nor do they have DTR or RTS outputs. If - * required, these have to be supplied via some other means (eg, GPIO) - * and hooked into this driver. - */ - -#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define UART_NR 8 - -#define SERIAL_AMBA_MAJOR 204 -#define SERIAL_AMBA_MINOR 16 -#define SERIAL_AMBA_NR UART_NR - -#define AMBA_ISR_PASS_LIMIT 256 - -#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) -#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) - -#define UART_DUMMY_RSR_RX 256 -#define UART_PORT_SIZE 64 - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_amba_port { - struct uart_port port; - struct clk *clk; - struct amba_device *dev; - struct amba_pl010_data *data; - unsigned int old_status; -}; - -static void pl010_stop_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr &= ~UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_start_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr |= UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_stop_rx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_enable_ms(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr |= UART010_CR_MSIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_rx_chars(struct uart_amba_port *uap) -{ - struct tty_struct *tty = uap->port.state->port.tty; - unsigned int status, ch, flag, rsr, max_count = 256; - - status = readb(uap->port.membase + UART01x_FR); - while (UART_RX_DATA(status) && max_count--) { - ch = readb(uap->port.membase + UART01x_DR); - flag = TTY_NORMAL; - - uap->port.icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); - - if (rsr & UART01x_RSR_BE) { - rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto ignore_char; - } else if (rsr & UART01x_RSR_PE) - uap->port.icount.parity++; - else if (rsr & UART01x_RSR_FE) - uap->port.icount.frame++; - if (rsr & UART01x_RSR_OE) - uap->port.icount.overrun++; - - rsr &= uap->port.read_status_mask; - - if (rsr & UART01x_RSR_BE) - flag = TTY_BREAK; - else if (rsr & UART01x_RSR_PE) - flag = TTY_PARITY; - else if (rsr & UART01x_RSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&uap->port, ch)) - goto ignore_char; - - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); - - ignore_char: - status = readb(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&uap->port.lock); -} - -static void pl010_tx_chars(struct uart_amba_port *uap) -{ - struct circ_buf *xmit = &uap->port.state->xmit; - int count; - - if (uap->port.x_char) { - writel(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { - pl010_stop_tx(&uap->port); - return; - } - - count = uap->port.fifosize >> 1; - do { - writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - if (uart_circ_empty(xmit)) - pl010_stop_tx(&uap->port); -} - -static void pl010_modem_status(struct uart_amba_port *uap) -{ - unsigned int status, delta; - - writel(0, uap->port.membase + UART010_ICR); - - status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; - - if (!delta) - return; - - if (delta & UART01x_FR_DCD) - uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - - if (delta & UART01x_FR_DSR) - uap->port.icount.dsr++; - - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); -} - -static irqreturn_t pl010_int(int irq, void *dev_id) -{ - struct uart_amba_port *uap = dev_id; - unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; - int handled = 0; - - spin_lock(&uap->port.lock); - - status = readb(uap->port.membase + UART010_IIR); - if (status) { - do { - if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) - pl010_rx_chars(uap); - if (status & UART010_IIR_MIS) - pl010_modem_status(uap); - if (status & UART010_IIR_TIS) - pl010_tx_chars(uap); - - if (pass_counter-- == 0) - break; - - status = readb(uap->port.membase + UART010_IIR); - } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | - UART010_IIR_TIS)); - handled = 1; - } - - spin_unlock(&uap->port.lock); - - return IRQ_RETVAL(handled); -} - -static unsigned int pl010_tx_empty(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status = readb(uap->port.membase + UART01x_FR); - return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; -} - -static unsigned int pl010_get_mctrl(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int result = 0; - unsigned int status; - - status = readb(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_DCD) - result |= TIOCM_CAR; - if (status & UART01x_FR_DSR) - result |= TIOCM_DSR; - if (status & UART01x_FR_CTS) - result |= TIOCM_CTS; - - return result; -} - -static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (uap->data) - uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); -} - -static void pl010_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned long flags; - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readb(uap->port.membase + UART010_LCRH); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else - lcr_h &= ~UART01x_LCRH_BRK; - writel(lcr_h, uap->port.membase + UART010_LCRH); - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -static int pl010_startup(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - int retval; - - /* - * Try to enable the clock producer. - */ - retval = clk_enable(uap->clk); - if (retval) - goto out; - - uap->port.uartclk = clk_get_rate(uap->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); - if (retval) - goto clk_dis; - - /* - * initialise the old status of the modem signals - */ - uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* - * Finally, enable interrupts - */ - writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, - uap->port.membase + UART010_CR); - - return 0; - - clk_dis: - clk_disable(uap->clk); - out: - return retval; -} - -static void pl010_shutdown(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - /* - * Free the interrupt - */ - free_irq(uap->port.irq, uap); - - /* - * disable all interrupts, disable the port - */ - writel(0, uap->port.membase + UART010_CR); - - /* disable break condition and fifos */ - writel(readb(uap->port.membase + UART010_LCRH) & - ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); - - /* - * Shut down the clock producer - */ - clk_disable(uap->clk); -} - -static void -pl010_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int lcr_h, old_cr; - unsigned long flags; - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr_h = UART01x_LCRH_WLEN_5; - break; - case CS6: - lcr_h = UART01x_LCRH_WLEN_6; - break; - case CS7: - lcr_h = UART01x_LCRH_WLEN_7; - break; - default: // CS8 - lcr_h = UART01x_LCRH_WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - lcr_h |= UART01x_LCRH_STP2; - if (termios->c_cflag & PARENB) { - lcr_h |= UART01x_LCRH_PEN; - if (!(termios->c_cflag & PARODD)) - lcr_h |= UART01x_LCRH_EPS; - } - if (uap->port.fifosize > 1) - lcr_h |= UART01x_LCRH_FEN; - - spin_lock_irqsave(&uap->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - uap->port.read_status_mask = UART01x_RSR_OE; - if (termios->c_iflag & INPCK) - uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - uap->port.read_status_mask |= UART01x_RSR_BE; - - /* - * Characters to ignore - */ - uap->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; - if (termios->c_iflag & IGNBRK) { - uap->port.ignore_status_mask |= UART01x_RSR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* first, disable everything */ - old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= UART010_CR_MSIE; - - writel(0, uap->port.membase + UART010_CR); - - /* Set baud rate */ - quot -= 1; - writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); - writel(quot & 0xff, uap->port.membase + UART010_LCRL); - - /* - * ----------v----------v----------v----------v----- - * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L - * ----------^----------^----------^----------^----- - */ - writel(lcr_h, uap->port.membase + UART010_LCRH); - writel(old_cr, uap->port.membase + UART010_CR); - - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -static void pl010_set_ldisc(struct uart_port *port, int new) -{ - if (new == N_PPS) { - port->flags |= UPF_HARDPPS_CD; - pl010_enable_ms(port); - } else - port->flags &= ~UPF_HARDPPS_CD; -} - -static const char *pl010_type(struct uart_port *port) -{ - return port->type == PORT_AMBA ? "AMBA" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void pl010_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl010_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") - != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pl010_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMBA; - pl010_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amba_pl010_pops = { - .tx_empty = pl010_tx_empty, - .set_mctrl = pl010_set_mctrl, - .get_mctrl = pl010_get_mctrl, - .stop_tx = pl010_stop_tx, - .start_tx = pl010_start_tx, - .stop_rx = pl010_stop_rx, - .enable_ms = pl010_enable_ms, - .break_ctl = pl010_break_ctl, - .startup = pl010_startup, - .shutdown = pl010_shutdown, - .set_termios = pl010_set_termios, - .set_ldisc = pl010_set_ldisc, - .type = pl010_type, - .release_port = pl010_release_port, - .request_port = pl010_request_port, - .config_port = pl010_config_port, - .verify_port = pl010_verify_port, -}; - -static struct uart_amba_port *amba_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE - -static void pl010_console_putchar(struct uart_port *port, int ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status; - - do { - status = readb(uap->port.membase + UART01x_FR); - barrier(); - } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); -} - -static void -pl010_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_amba_port *uap = amba_ports[co->index]; - unsigned int status, old_cr; - - clk_enable(uap->clk); - - /* - * First save the CR then disable the interrupts - */ - old_cr = readb(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - - uart_console_write(&uap->port, s, count, pl010_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = readb(uap->port.membase + UART01x_FR); - barrier(); - } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); - - clk_disable(uap->clk); -} - -static void __init -pl010_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) -{ - if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, quot; - lcr_h = readb(uap->port.membase + UART010_LCRH); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; - else - *bits = 8; - - quot = readb(uap->port.membase + UART010_LCRL) | - readb(uap->port.membase + UART010_LCRM) << 8; - *baud = uap->port.uartclk / (16 * (quot + 1)); - } -} - -static int __init pl010_console_setup(struct console *co, char *options) -{ - struct uart_amba_port *uap; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) - return -ENODEV; - - uap->port.uartclk = clk_get_rate(uap->clk); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - pl010_console_get_options(uap, &baud, &parity, &bits); - - return uart_set_options(&uap->port, co, baud, parity, bits, flow); -} - -static struct uart_driver amba_reg; -static struct console amba_console = { - .name = "ttyAM", - .write = pl010_console_write, - .device = uart_console_device, - .setup = pl010_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &amba_reg, -}; - -#define AMBA_CONSOLE &amba_console -#else -#define AMBA_CONSOLE NULL -#endif - -static struct uart_driver amba_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAM", - .dev_name = "ttyAM", - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, - .nr = UART_NR, - .cons = AMBA_CONSOLE, -}; - -static int pl010_probe(struct amba_device *dev, struct amba_id *id) -{ - struct uart_amba_port *uap; - void __iomem *base; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) - break; - - if (i == ARRAY_SIZE(amba_ports)) { - ret = -EBUSY; - goto out; - } - - uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); - if (!uap) { - ret = -ENOMEM; - goto out; - } - - base = ioremap(dev->res.start, resource_size(&dev->res)); - if (!base) { - ret = -ENOMEM; - goto free; - } - - uap->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(uap->clk)) { - ret = PTR_ERR(uap->clk); - goto unmap; - } - - uap->port.dev = &dev->dev; - uap->port.mapbase = dev->res.start; - uap->port.membase = base; - uap->port.iotype = UPIO_MEM; - uap->port.irq = dev->irq[0]; - uap->port.fifosize = 16; - uap->port.ops = &amba_pl010_pops; - uap->port.flags = UPF_BOOT_AUTOCONF; - uap->port.line = i; - uap->dev = dev; - uap->data = dev->dev.platform_data; - - amba_ports[i] = uap; - - amba_set_drvdata(dev, uap); - ret = uart_add_one_port(&amba_reg, &uap->port); - if (ret) { - amba_set_drvdata(dev, NULL); - amba_ports[i] = NULL; - clk_put(uap->clk); - unmap: - iounmap(base); - free: - kfree(uap); - } - out: - return ret; -} - -static int pl010_remove(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - int i; - - amba_set_drvdata(dev, NULL); - - uart_remove_one_port(&amba_reg, &uap->port); - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == uap) - amba_ports[i] = NULL; - - iounmap(uap->port.membase); - clk_put(uap->clk); - kfree(uap); - return 0; -} - -static int pl010_suspend(struct amba_device *dev, pm_message_t state) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (uap) - uart_suspend_port(&amba_reg, &uap->port); - - return 0; -} - -static int pl010_resume(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (uap) - uart_resume_port(&amba_reg, &uap->port); - - return 0; -} - -static struct amba_id pl010_ids[] = { - { - .id = 0x00041010, - .mask = 0x000fffff, - }, - { 0, 0 }, -}; - -static struct amba_driver pl010_driver = { - .drv = { - .name = "uart-pl010", - }, - .id_table = pl010_ids, - .probe = pl010_probe, - .remove = pl010_remove, - .suspend = pl010_suspend, - .resume = pl010_resume, -}; - -static int __init pl010_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: AMBA driver\n"); - - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl010_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; -} - -static void __exit pl010_exit(void) -{ - amba_driver_unregister(&pl010_driver); - uart_unregister_driver(&amba_reg); -} - -module_init(pl010_init); -module_exit(pl010_exit); - -MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("ARM AMBA serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c deleted file mode 100644 index e76d7d0..0000000 --- a/drivers/serial/amba-pl011.c +++ /dev/null @@ -1,1519 +0,0 @@ -/* - * linux/drivers/char/amba.c - * - * Driver for AMBA serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * Copyright (C) 2010 ST-Ericsson SA - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This is a generic driver for ARM AMBA-type serial ports. They - * have a lot of 16550-like features, but are not register compatible. - * Note that although they do have CTS, DCD and DSR inputs, they do - * not have an RI input, nor do they have DTR or RTS outputs. If - * required, these have to be supplied via some other means (eg, GPIO) - * and hooked into this driver. - */ - -#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define UART_NR 14 - -#define SERIAL_AMBA_MAJOR 204 -#define SERIAL_AMBA_MINOR 64 -#define SERIAL_AMBA_NR UART_NR - -#define AMBA_ISR_PASS_LIMIT 256 - -#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) -#define UART_DUMMY_DR_RX (1 << 16) - -/* There is by now at least one vendor with differing details, so handle it */ -struct vendor_data { - unsigned int ifls; - unsigned int fifosize; - unsigned int lcrh_tx; - unsigned int lcrh_rx; - bool oversampling; - bool dma_threshold; -}; - -static struct vendor_data vendor_arm = { - .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .fifosize = 16, - .lcrh_tx = UART011_LCRH, - .lcrh_rx = UART011_LCRH, - .oversampling = false, - .dma_threshold = false, -}; - -static struct vendor_data vendor_st = { - .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, - .fifosize = 64, - .lcrh_tx = ST_UART011_LCRH_TX, - .lcrh_rx = ST_UART011_LCRH_RX, - .oversampling = true, - .dma_threshold = true, -}; - -/* Deals with DMA transactions */ -struct pl011_dmatx_data { - struct dma_chan *chan; - struct scatterlist sg; - char *buf; - bool queued; -}; - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_amba_port { - struct uart_port port; - struct clk *clk; - const struct vendor_data *vendor; - unsigned int dmacr; /* dma control reg */ - unsigned int im; /* interrupt mask */ - unsigned int old_status; - unsigned int fifosize; /* vendor-specific */ - unsigned int lcrh_tx; /* vendor-specific */ - unsigned int lcrh_rx; /* vendor-specific */ - bool autorts; - char type[12]; -#ifdef CONFIG_DMA_ENGINE - /* DMA stuff */ - bool using_dma; - struct pl011_dmatx_data dmatx; -#endif -}; - -/* - * All the DMA operation mode stuff goes inside this ifdef. - * This assumes that you have a generic DMA device interface, - * no custom DMA interfaces are supported. - */ -#ifdef CONFIG_DMA_ENGINE - -#define PL011_DMA_BUFFER_SIZE PAGE_SIZE - -static void pl011_dma_probe_initcall(struct uart_amba_port *uap) -{ - /* DMA is the sole user of the platform data right now */ - struct amba_pl011_data *plat = uap->port.dev->platform_data; - struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + UART01x_DR, - .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_TO_DEVICE, - .dst_maxburst = uap->fifosize >> 1, - }; - struct dma_chan *chan; - dma_cap_mask_t mask; - - /* We need platform data */ - if (!plat || !plat->dma_filter) { - dev_info(uap->port.dev, "no DMA platform data\n"); - return; - } - - /* Try to acquire a generic DMA engine slave channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); - if (!chan) { - dev_err(uap->port.dev, "no TX DMA channel!\n"); - return; - } - - dmaengine_slave_config(chan, &tx_conf); - uap->dmatx.chan = chan; - - dev_info(uap->port.dev, "DMA channel TX %s\n", - dma_chan_name(uap->dmatx.chan)); -} - -#ifndef MODULE -/* - * Stack up the UARTs and let the above initcall be done at device - * initcall time, because the serial driver is called as an arch - * initcall, and at this time the DMA subsystem is not yet registered. - * At this point the driver will switch over to using DMA where desired. - */ -struct dma_uap { - struct list_head node; - struct uart_amba_port *uap; -}; - -static LIST_HEAD(pl011_dma_uarts); - -static int __init pl011_dma_initcall(void) -{ - struct list_head *node, *tmp; - - list_for_each_safe(node, tmp, &pl011_dma_uarts) { - struct dma_uap *dmau = list_entry(node, struct dma_uap, node); - pl011_dma_probe_initcall(dmau->uap); - list_del(node); - kfree(dmau); - } - return 0; -} - -device_initcall(pl011_dma_initcall); - -static void pl011_dma_probe(struct uart_amba_port *uap) -{ - struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); - if (dmau) { - dmau->uap = uap; - list_add_tail(&dmau->node, &pl011_dma_uarts); - } -} -#else -static void pl011_dma_probe(struct uart_amba_port *uap) -{ - pl011_dma_probe_initcall(uap); -} -#endif - -static void pl011_dma_remove(struct uart_amba_port *uap) -{ - /* TODO: remove the initcall if it has not yet executed */ - if (uap->dmatx.chan) - dma_release_channel(uap->dmatx.chan); -} - - -/* Forward declare this for the refill routine */ -static int pl011_dma_tx_refill(struct uart_amba_port *uap); - -/* - * The current DMA TX buffer has been sent. - * Try to queue up another DMA buffer. - */ -static void pl011_dma_tx_callback(void *data) -{ - struct uart_amba_port *uap = data; - struct pl011_dmatx_data *dmatx = &uap->dmatx; - unsigned long flags; - u16 dmacr; - - spin_lock_irqsave(&uap->port.lock, flags); - if (uap->dmatx.queued) - dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1, - DMA_TO_DEVICE); - - dmacr = uap->dmacr; - uap->dmacr = dmacr & ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - /* - * If TX DMA was disabled, it means that we've stopped the DMA for - * some reason (eg, XOFF received, or we want to send an X-char.) - * - * Note: we need to be careful here of a potential race between DMA - * and the rest of the driver - if the driver disables TX DMA while - * a TX buffer completing, we must update the tx queued status to - * get further refills (hence we check dmacr). - */ - if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) || - uart_circ_empty(&uap->port.state->xmit)) { - uap->dmatx.queued = false; - spin_unlock_irqrestore(&uap->port.lock, flags); - return; - } - - if (pl011_dma_tx_refill(uap) <= 0) { - /* - * We didn't queue a DMA buffer for some reason, but we - * have data pending to be sent. Re-enable the TX IRQ. - */ - uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - } - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -/* - * Try to refill the TX DMA buffer. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * 1 if we queued up a TX DMA buffer. - * 0 if we didn't want to handle this by DMA - * <0 on error - */ -static int pl011_dma_tx_refill(struct uart_amba_port *uap) -{ - struct pl011_dmatx_data *dmatx = &uap->dmatx; - struct dma_chan *chan = dmatx->chan; - struct dma_device *dma_dev = chan->device; - struct dma_async_tx_descriptor *desc; - struct circ_buf *xmit = &uap->port.state->xmit; - unsigned int count; - - /* - * Try to avoid the overhead involved in using DMA if the - * transaction fits in the first half of the FIFO, by using - * the standard interrupt handling. This ensures that we - * issue a uart_write_wakeup() at the appropriate time. - */ - count = uart_circ_chars_pending(xmit); - if (count < (uap->fifosize >> 1)) { - uap->dmatx.queued = false; - return 0; - } - - /* - * Bodge: don't send the last character by DMA, as this - * will prevent XON from notifying us to restart DMA. - */ - count -= 1; - - /* Else proceed to copy the TX chars to the DMA buffer and fire DMA */ - if (count > PL011_DMA_BUFFER_SIZE) - count = PL011_DMA_BUFFER_SIZE; - - if (xmit->tail < xmit->head) - memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); - else { - size_t first = UART_XMIT_SIZE - xmit->tail; - size_t second = xmit->head; - - memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first); - if (second) - memcpy(&dmatx->buf[first], &xmit->buf[0], second); - } - - dmatx->sg.length = count; - - if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) { - uap->dmatx.queued = false; - dev_dbg(uap->port.dev, "unable to map TX DMA\n"); - return -EBUSY; - } - - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); - uap->dmatx.queued = false; - /* - * If DMA cannot be used right now, we complete this - * transaction via IRQ and let the TTY layer retry. - */ - dev_dbg(uap->port.dev, "TX DMA busy\n"); - return -EBUSY; - } - - /* Some data to go along to the callback */ - desc->callback = pl011_dma_tx_callback; - desc->callback_param = uap; - - /* All errors should happen at prepare time */ - dmaengine_submit(desc); - - /* Fire the DMA transaction */ - dma_dev->device_issue_pending(chan); - - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - uap->dmatx.queued = true; - - /* - * Now we know that DMA will fire, so advance the ring buffer - * with the stuff we just dispatched. - */ - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx += count; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - return 1; -} - -/* - * We received a transmit interrupt without a pending X-char but with - * pending characters. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * false if we want to use PIO to transmit - * true if we queued a DMA buffer - */ -static bool pl011_dma_tx_irq(struct uart_amba_port *uap) -{ - if (!uap->using_dma) - return false; - - /* - * If we already have a TX buffer queued, but received a - * TX interrupt, it will be because we've just sent an X-char. - * Ensure the TX DMA is enabled and the TX IRQ is disabled. - */ - if (uap->dmatx.queued) { - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - return true; - } - - /* - * We don't have a TX buffer queued, so try to queue one. - * If we succesfully queued a buffer, mask the TX IRQ. - */ - if (pl011_dma_tx_refill(uap) > 0) { - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - return true; - } - return false; -} - -/* - * Stop the DMA transmit (eg, due to received XOFF). - * Locking: called with port lock held and IRQs disabled. - */ -static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) -{ - if (uap->dmatx.queued) { - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - } -} - -/* - * Try to start a DMA transmit, or in the case of an XON/OFF - * character queued for send, try to get that character out ASAP. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * false if we want the TX IRQ to be enabled - * true if we have a buffer queued - */ -static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) -{ - u16 dmacr; - - if (!uap->using_dma) - return false; - - if (!uap->port.x_char) { - /* no X-char, try to push chars out in DMA mode */ - bool ret = true; - - if (!uap->dmatx.queued) { - if (pl011_dma_tx_refill(uap) > 0) { - uap->im &= ~UART011_TXIM; - ret = true; - } else { - uap->im |= UART011_TXIM; - ret = false; - } - writew(uap->im, uap->port.membase + UART011_IMSC); - } else if (!(uap->dmacr & UART011_TXDMAE)) { - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, - uap->port.membase + UART011_DMACR); - } - return ret; - } - - /* - * We have an X-char to send. Disable DMA to prevent it loading - * the TX fifo, and then see if we can stuff it into the FIFO. - */ - dmacr = uap->dmacr; - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { - /* - * No space in the FIFO, so enable the transmit interrupt - * so we know when there is space. Note that once we've - * loaded the character, we should just re-enable DMA. - */ - return false; - } - - writew(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - - /* Success - restore the DMA state */ - uap->dmacr = dmacr; - writew(dmacr, uap->port.membase + UART011_DMACR); - - return true; -} - -/* - * Flush the transmit buffer. - * Locking: called with port lock held and IRQs disabled. - */ -static void pl011_dma_flush_buffer(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (!uap->using_dma) - return; - - /* Avoid deadlock with the DMA engine callback */ - spin_unlock(&uap->port.lock); - dmaengine_terminate_all(uap->dmatx.chan); - spin_lock(&uap->port.lock); - if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); - uap->dmatx.queued = false; - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - } -} - - -static void pl011_dma_startup(struct uart_amba_port *uap) -{ - if (!uap->dmatx.chan) - return; - - uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); - if (!uap->dmatx.buf) { - dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); - uap->port.fifosize = uap->fifosize; - return; - } - - sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE); - - /* The DMA buffer is now the FIFO the TTY subsystem can use */ - uap->port.fifosize = PL011_DMA_BUFFER_SIZE; - uap->using_dma = true; - - /* Turn on DMA error (RX/TX will be enabled on demand) */ - uap->dmacr |= UART011_DMAONERR; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - /* - * ST Micro variants has some specific dma burst threshold - * compensation. Set this to 16 bytes, so burst will only - * be issued above/below 16 bytes. - */ - if (uap->vendor->dma_threshold) - writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - uap->port.membase + ST_UART011_DMAWM); -} - -static void pl011_dma_shutdown(struct uart_amba_port *uap) -{ - if (!uap->using_dma) - return; - - /* Disable RX and TX DMA */ - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) - barrier(); - - spin_lock_irq(&uap->port.lock); - uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - spin_unlock_irq(&uap->port.lock); - - /* In theory, this should already be done by pl011_dma_flush_buffer */ - dmaengine_terminate_all(uap->dmatx.chan); - if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); - uap->dmatx.queued = false; - } - - kfree(uap->dmatx.buf); - - uap->using_dma = false; -} - -#else -/* Blank functions if the DMA engine is not available */ -static inline void pl011_dma_probe(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_remove(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_startup(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_shutdown(struct uart_amba_port *uap) -{ -} - -static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap) -{ - return false; -} - -static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) -{ -} - -static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) -{ - return false; -} - -#define pl011_dma_flush_buffer NULL -#endif - - -static void pl011_stop_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - pl011_dma_tx_stop(uap); -} - -static void pl011_start_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (!pl011_dma_tx_start(uap)) { - uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - } -} - -static void pl011_stop_rx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| - UART011_PEIM|UART011_BEIM|UART011_OEIM); - writew(uap->im, uap->port.membase + UART011_IMSC); -} - -static void pl011_enable_ms(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - writew(uap->im, uap->port.membase + UART011_IMSC); -} - -static void pl011_rx_chars(struct uart_amba_port *uap) -{ - struct tty_struct *tty = uap->port.state->port.tty; - unsigned int status, ch, flag, max_count = 256; - - status = readw(uap->port.membase + UART01x_FR); - while ((status & UART01x_FR_RXFE) == 0 && max_count--) { - ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; - flag = TTY_NORMAL; - uap->port.icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_DR_ERROR)) { - if (ch & UART011_DR_BE) { - ch &= ~(UART011_DR_FE | UART011_DR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto ignore_char; - } else if (ch & UART011_DR_PE) - uap->port.icount.parity++; - else if (ch & UART011_DR_FE) - uap->port.icount.frame++; - if (ch & UART011_DR_OE) - uap->port.icount.overrun++; - - ch &= uap->port.read_status_mask; - - if (ch & UART011_DR_BE) - flag = TTY_BREAK; - else if (ch & UART011_DR_PE) - flag = TTY_PARITY; - else if (ch & UART011_DR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&uap->port, ch & 255)) - goto ignore_char; - - uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); - - ignore_char: - status = readw(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&uap->port.lock); -} - -static void pl011_tx_chars(struct uart_amba_port *uap) -{ - struct circ_buf *xmit = &uap->port.state->xmit; - int count; - - if (uap->port.x_char) { - writew(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { - pl011_stop_tx(&uap->port); - return; - } - - /* If we are using DMA mode, try to send some characters. */ - if (pl011_dma_tx_irq(uap)) - return; - - count = uap->fifosize >> 1; - do { - writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - if (uart_circ_empty(xmit)) - pl011_stop_tx(&uap->port); -} - -static void pl011_modem_status(struct uart_amba_port *uap) -{ - unsigned int status, delta; - - status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; - - if (!delta) - return; - - if (delta & UART01x_FR_DCD) - uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - - if (delta & UART01x_FR_DSR) - uap->port.icount.dsr++; - - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); -} - -static irqreturn_t pl011_int(int irq, void *dev_id) -{ - struct uart_amba_port *uap = dev_id; - unsigned long flags; - unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; - int handled = 0; - - spin_lock_irqsave(&uap->port.lock, flags); - - status = readw(uap->port.membase + UART011_MIS); - if (status) { - do { - writew(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), - uap->port.membase + UART011_ICR); - - if (status & (UART011_RTIS|UART011_RXIS)) - pl011_rx_chars(uap); - if (status & (UART011_DSRMIS|UART011_DCDMIS| - UART011_CTSMIS|UART011_RIMIS)) - pl011_modem_status(uap); - if (status & UART011_TXIS) - pl011_tx_chars(uap); - - if (pass_counter-- == 0) - break; - - status = readw(uap->port.membase + UART011_MIS); - } while (status != 0); - handled = 1; - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - return IRQ_RETVAL(handled); -} - -static unsigned int pl01x_tx_empty(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status = readw(uap->port.membase + UART01x_FR); - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; -} - -static unsigned int pl01x_get_mctrl(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int result = 0; - unsigned int status = readw(uap->port.membase + UART01x_FR); - -#define TIOCMBIT(uartbit, tiocmbit) \ - if (status & uartbit) \ - result |= tiocmbit - - TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); -#undef TIOCMBIT - return result; -} - -static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readw(uap->port.membase + UART011_CR); - -#define TIOCMBIT(tiocmbit, uartbit) \ - if (mctrl & tiocmbit) \ - cr |= uartbit; \ - else \ - cr &= ~uartbit - - TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); - TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); - TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); - TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); - TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); - - if (uap->autorts) { - /* We need to disable auto-RTS if we want to turn RTS off */ - TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); - } -#undef TIOCMBIT - - writew(cr, uap->port.membase + UART011_CR); -} - -static void pl011_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned long flags; - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + uap->lcrh_tx); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else - lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + uap->lcrh_tx); - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -#ifdef CONFIG_CONSOLE_POLL -static int pl010_get_poll_char(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status; - - status = readw(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_RXFE) - return NO_POLL_CHAR; - - return readw(uap->port.membase + UART01x_DR); -} - -static void pl010_put_poll_char(struct uart_port *port, - unsigned char ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) - barrier(); - - writew(ch, uap->port.membase + UART01x_DR); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int pl011_startup(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - int retval; - - /* - * Try to enable the clock producer. - */ - retval = clk_enable(uap->clk); - if (retval) - goto out; - - uap->port.uartclk = clk_get_rate(uap->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); - if (retval) - goto clk_dis; - - writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); - - /* - * Provoke TX FIFO interrupt into asserting. - */ - cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; - writew(cr, uap->port.membase + UART011_CR); - writew(0, uap->port.membase + UART011_FBRD); - writew(1, uap->port.membase + UART011_IBRD); - writew(0, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_tx != uap->lcrh_rx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(0, uap->port.membase + uap->lcrh_tx); - } - writew(0, uap->port.membase + UART01x_DR); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) - barrier(); - - cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); - - /* Clear pending error interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); - - /* - * initialise the old status of the modem signals - */ - uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* Startup DMA */ - pl011_dma_startup(uap); - - /* - * Finally, enable interrupts - */ - spin_lock_irq(&uap->port.lock); - uap->im = UART011_RXIM | UART011_RTIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - spin_unlock_irq(&uap->port.lock); - - return 0; - - clk_dis: - clk_disable(uap->clk); - out: - return retval; -} - -static void pl011_shutdown_channel(struct uart_amba_port *uap, - unsigned int lcrh) -{ - unsigned long val; - - val = readw(uap->port.membase + lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + lcrh); -} - -static void pl011_shutdown(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - /* - * disable all interrupts - */ - spin_lock_irq(&uap->port.lock); - uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - spin_unlock_irq(&uap->port.lock); - - pl011_dma_shutdown(uap); - - /* - * Free the interrupt - */ - free_irq(uap->port.irq, uap); - - /* - * disable the port - */ - uap->autorts = false; - writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); - - /* - * disable break condition and fifos - */ - pl011_shutdown_channel(uap, uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) - pl011_shutdown_channel(uap, uap->lcrh_tx); - - /* - * Shut down the clock producer - */ - clk_disable(uap->clk); -} - -static void -pl011_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int lcr_h, old_cr; - unsigned long flags; - unsigned int baud, quot, clkdiv; - - if (uap->vendor->oversampling) - clkdiv = 8; - else - clkdiv = 16; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, - port->uartclk / clkdiv); - - if (baud > port->uartclk/16) - quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); - else - quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr_h = UART01x_LCRH_WLEN_5; - break; - case CS6: - lcr_h = UART01x_LCRH_WLEN_6; - break; - case CS7: - lcr_h = UART01x_LCRH_WLEN_7; - break; - default: // CS8 - lcr_h = UART01x_LCRH_WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - lcr_h |= UART01x_LCRH_STP2; - if (termios->c_cflag & PARENB) { - lcr_h |= UART01x_LCRH_PEN; - if (!(termios->c_cflag & PARODD)) - lcr_h |= UART01x_LCRH_EPS; - } - if (uap->fifosize > 1) - lcr_h |= UART01x_LCRH_FEN; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UART011_DR_OE | 255; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART011_DR_BE; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART011_DR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_DR_RX; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - pl011_enable_ms(port); - - /* first, disable everything */ - old_cr = readw(port->membase + UART011_CR); - writew(0, port->membase + UART011_CR); - - if (termios->c_cflag & CRTSCTS) { - if (old_cr & UART011_CR_RTS) - old_cr |= UART011_CR_RTSEN; - - old_cr |= UART011_CR_CTSEN; - uap->autorts = true; - } else { - old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); - uap->autorts = false; - } - - if (uap->vendor->oversampling) { - if (baud > port->uartclk / 16) - old_cr |= ST_UART011_CR_OVSFACT; - else - old_cr &= ~ST_UART011_CR_OVSFACT; - } - - /* Set baud rate */ - writew(quot & 0x3f, port->membase + UART011_FBRD); - writew(quot >> 6, port->membase + UART011_IBRD); - - /* - * ----------v----------v----------v----------v----- - * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L - * ----------^----------^----------^----------^----- - */ - writew(lcr_h, port->membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, port->membase + uap->lcrh_tx); - } - writew(old_cr, port->membase + UART011_CR); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pl011_type(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - return uap->port.type == PORT_AMBA ? uap->type : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void pl010_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SZ_4K); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl010_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") - != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pl010_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMBA; - pl010_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amba_pl011_pops = { - .tx_empty = pl01x_tx_empty, - .set_mctrl = pl011_set_mctrl, - .get_mctrl = pl01x_get_mctrl, - .stop_tx = pl011_stop_tx, - .start_tx = pl011_start_tx, - .stop_rx = pl011_stop_rx, - .enable_ms = pl011_enable_ms, - .break_ctl = pl011_break_ctl, - .startup = pl011_startup, - .shutdown = pl011_shutdown, - .flush_buffer = pl011_dma_flush_buffer, - .set_termios = pl011_set_termios, - .type = pl011_type, - .release_port = pl010_release_port, - .request_port = pl010_request_port, - .config_port = pl010_config_port, - .verify_port = pl010_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = pl010_get_poll_char, - .poll_put_char = pl010_put_poll_char, -#endif -}; - -static struct uart_amba_port *amba_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE - -static void pl011_console_putchar(struct uart_port *port, int ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) - barrier(); - writew(ch, uap->port.membase + UART01x_DR); -} - -static void -pl011_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_amba_port *uap = amba_ports[co->index]; - unsigned int status, old_cr, new_cr; - - clk_enable(uap->clk); - - /* - * First save the CR then disable the interrupts - */ - old_cr = readw(uap->port.membase + UART011_CR); - new_cr = old_cr & ~UART011_CR_CTSEN; - new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); - - uart_console_write(&uap->port, s, count, pl011_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = readw(uap->port.membase + UART01x_FR); - } while (status & UART01x_FR_BUSY); - writew(old_cr, uap->port.membase + UART011_CR); - - clk_disable(uap->clk); -} - -static void __init -pl011_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) -{ - if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, ibrd, fbrd; - - lcr_h = readw(uap->port.membase + uap->lcrh_tx); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; - else - *bits = 8; - - ibrd = readw(uap->port.membase + UART011_IBRD); - fbrd = readw(uap->port.membase + UART011_FBRD); - - *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); - - if (uap->vendor->oversampling) { - if (readw(uap->port.membase + UART011_CR) - & ST_UART011_CR_OVSFACT) - *baud *= 2; - } - } -} - -static int __init pl011_console_setup(struct console *co, char *options) -{ - struct uart_amba_port *uap; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) - return -ENODEV; - - uap->port.uartclk = clk_get_rate(uap->clk); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - pl011_console_get_options(uap, &baud, &parity, &bits); - - return uart_set_options(&uap->port, co, baud, parity, bits, flow); -} - -static struct uart_driver amba_reg; -static struct console amba_console = { - .name = "ttyAMA", - .write = pl011_console_write, - .device = uart_console_device, - .setup = pl011_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &amba_reg, -}; - -#define AMBA_CONSOLE (&amba_console) -#else -#define AMBA_CONSOLE NULL -#endif - -static struct uart_driver amba_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAMA", - .dev_name = "ttyAMA", - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, - .nr = UART_NR, - .cons = AMBA_CONSOLE, -}; - -static int pl011_probe(struct amba_device *dev, struct amba_id *id) -{ - struct uart_amba_port *uap; - struct vendor_data *vendor = id->data; - void __iomem *base; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) - break; - - if (i == ARRAY_SIZE(amba_ports)) { - ret = -EBUSY; - goto out; - } - - uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); - if (uap == NULL) { - ret = -ENOMEM; - goto out; - } - - base = ioremap(dev->res.start, resource_size(&dev->res)); - if (!base) { - ret = -ENOMEM; - goto free; - } - - uap->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(uap->clk)) { - ret = PTR_ERR(uap->clk); - goto unmap; - } - - uap->vendor = vendor; - uap->lcrh_rx = vendor->lcrh_rx; - uap->lcrh_tx = vendor->lcrh_tx; - uap->fifosize = vendor->fifosize; - uap->port.dev = &dev->dev; - uap->port.mapbase = dev->res.start; - uap->port.membase = base; - uap->port.iotype = UPIO_MEM; - uap->port.irq = dev->irq[0]; - uap->port.fifosize = uap->fifosize; - uap->port.ops = &amba_pl011_pops; - uap->port.flags = UPF_BOOT_AUTOCONF; - uap->port.line = i; - pl011_dma_probe(uap); - - snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); - - amba_ports[i] = uap; - - amba_set_drvdata(dev, uap); - ret = uart_add_one_port(&amba_reg, &uap->port); - if (ret) { - amba_set_drvdata(dev, NULL); - amba_ports[i] = NULL; - pl011_dma_remove(uap); - clk_put(uap->clk); - unmap: - iounmap(base); - free: - kfree(uap); - } - out: - return ret; -} - -static int pl011_remove(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - int i; - - amba_set_drvdata(dev, NULL); - - uart_remove_one_port(&amba_reg, &uap->port); - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == uap) - amba_ports[i] = NULL; - - pl011_dma_remove(uap); - iounmap(uap->port.membase); - clk_put(uap->clk); - kfree(uap); - return 0; -} - -#ifdef CONFIG_PM -static int pl011_suspend(struct amba_device *dev, pm_message_t state) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (!uap) - return -EINVAL; - - return uart_suspend_port(&amba_reg, &uap->port); -} - -static int pl011_resume(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (!uap) - return -EINVAL; - - return uart_resume_port(&amba_reg, &uap->port); -} -#endif - -static struct amba_id pl011_ids[] = { - { - .id = 0x00041011, - .mask = 0x000fffff, - .data = &vendor_arm, - }, - { - .id = 0x00380802, - .mask = 0x00ffffff, - .data = &vendor_st, - }, - { 0, 0 }, -}; - -static struct amba_driver pl011_driver = { - .drv = { - .name = "uart-pl011", - }, - .id_table = pl011_ids, - .probe = pl011_probe, - .remove = pl011_remove, -#ifdef CONFIG_PM - .suspend = pl011_suspend, - .resume = pl011_resume, -#endif -}; - -static int __init pl011_init(void) -{ - int ret; - printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); - - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl011_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; -} - -static void __exit pl011_exit(void) -{ - amba_driver_unregister(&pl011_driver); - uart_unregister_driver(&amba_reg); -} - -/* - * While this can be a module, if builtin it's most likely the console - * So let's leave module_exit but move module_init to an earlier place - */ -arch_initcall(pl011_init); -module_exit(pl011_exit); - -MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("ARM AMBA serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c deleted file mode 100644 index 095a5d5..0000000 --- a/drivers/serial/apbuart.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * Driver for GRLIB serial ports (APBUART) - * - * Based on linux/drivers/serial/amba.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * Copyright (C) 2003 Konrad Eisele - * Copyright (C) 2006 Daniel Hellstrom , Aeroflex Gaisler AB - * Copyright (C) 2008 Gilead Kutnick - * Copyright (C) 2009 Kristoffer Glembo , Aeroflex Gaisler AB - */ - -#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "apbuart.h" - -#define SERIAL_APBUART_MAJOR TTY_MAJOR -#define SERIAL_APBUART_MINOR 64 -#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */ - -static void apbuart_tx_chars(struct uart_port *port); - -static void apbuart_stop_tx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr &= ~UART_CTRL_TI; - UART_PUT_CTRL(port, cr); -} - -static void apbuart_start_tx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr |= UART_CTRL_TI; - UART_PUT_CTRL(port, cr); - - if (UART_GET_STATUS(port) & UART_STATUS_THE) - apbuart_tx_chars(port); -} - -static void apbuart_stop_rx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr &= ~(UART_CTRL_RI); - UART_PUT_CTRL(port, cr); -} - -static void apbuart_enable_ms(struct uart_port *port) -{ - /* No modem status change interrupts for APBUART */ -} - -static void apbuart_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, rsr, flag; - unsigned int max_chars = port->fifosize; - - status = UART_GET_STATUS(port); - - while (UART_RX_DATA(status) && (max_chars--)) { - - ch = UART_GET_CHAR(port); - flag = TTY_NORMAL; - - port->icount.rx++; - - rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; - UART_PUT_STATUS(port, 0); - if (rsr & UART_STATUS_ERR) { - - if (rsr & UART_STATUS_BR) { - rsr &= ~(UART_STATUS_FE | UART_STATUS_PE); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } else if (rsr & UART_STATUS_PE) { - port->icount.parity++; - } else if (rsr & UART_STATUS_FE) { - port->icount.frame++; - } - if (rsr & UART_STATUS_OE) - port->icount.overrun++; - - rsr &= port->read_status_mask; - - if (rsr & UART_STATUS_PE) - flag = TTY_PARITY; - else if (rsr & UART_STATUS_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag); - - - ignore_char: - status = UART_GET_STATUS(port); - } - - tty_flip_buffer_push(tty); -} - -static void apbuart_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - int count; - - if (port->x_char) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - apbuart_stop_tx(port); - return; - } - - /* amba: fill FIFO */ - count = port->fifosize >> 1; - do { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - apbuart_stop_tx(port); -} - -static irqreturn_t apbuart_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status; - - spin_lock(&port->lock); - - status = UART_GET_STATUS(port); - if (status & UART_STATUS_DR) - apbuart_rx_chars(port); - if (status & UART_STATUS_THE) - apbuart_tx_chars(port); - - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int apbuart_tx_empty(struct uart_port *port) -{ - unsigned int status = UART_GET_STATUS(port); - return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; -} - -static unsigned int apbuart_get_mctrl(struct uart_port *port) -{ - /* The GRLIB APBUART handles flow control in hardware */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* The GRLIB APBUART handles flow control in hardware */ -} - -static void apbuart_break_ctl(struct uart_port *port, int break_state) -{ - /* We don't support sending break */ -} - -static int apbuart_startup(struct uart_port *port) -{ - int retval; - unsigned int cr; - - /* Allocate the IRQ */ - retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port); - if (retval) - return retval; - - /* Finally, enable interrupts */ - cr = UART_GET_CTRL(port); - UART_PUT_CTRL(port, - cr | UART_CTRL_RE | UART_CTRL_TE | - UART_CTRL_RI | UART_CTRL_TI); - - return 0; -} - -static void apbuart_shutdown(struct uart_port *port) -{ - unsigned int cr; - - /* disable all interrupts, disable the port */ - cr = UART_GET_CTRL(port); - UART_PUT_CTRL(port, - cr & ~(UART_CTRL_RE | UART_CTRL_TE | - UART_CTRL_RI | UART_CTRL_TI)); - - /* Free the interrupt */ - free_irq(port->irq, port); -} - -static void apbuart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - unsigned int cr; - unsigned long flags; - unsigned int baud, quot; - - /* Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud == 0) - panic("invalid baudrate %i\n", port->uartclk / 16); - - /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */ - quot = (uart_get_divisor(port, baud)) * 2; - cr = UART_GET_CTRL(port); - cr &= ~(UART_CTRL_PE | UART_CTRL_PS); - - if (termios->c_cflag & PARENB) { - cr |= UART_CTRL_PE; - if ((termios->c_cflag & PARODD)) - cr |= UART_CTRL_PS; - } - - /* Enable flow control. */ - if (termios->c_cflag & CRTSCTS) - cr |= UART_CTRL_FL; - - spin_lock_irqsave(&port->lock, flags); - - /* Update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UART_STATUS_OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; - - /* Characters to ignore */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE; - - /* Ignore all characters if CREAD is not set. */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* Set baud rate */ - quot -= 1; - UART_PUT_SCAL(port, quot); - UART_PUT_CTRL(port, cr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *apbuart_type(struct uart_port *port) -{ - return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL; -} - -static void apbuart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, 0x100); -} - -static int apbuart_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, 0x100, "grlib-apbuart") - != NULL ? 0 : -EBUSY; - return 0; -} - -/* Configure/autoconfigure the port */ -static void apbuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_APBUART; - apbuart_request_port(port); - } -} - -/* Verify the new serial_struct (for TIOCSSERIAL) */ -static int apbuart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops grlib_apbuart_ops = { - .tx_empty = apbuart_tx_empty, - .set_mctrl = apbuart_set_mctrl, - .get_mctrl = apbuart_get_mctrl, - .stop_tx = apbuart_stop_tx, - .start_tx = apbuart_start_tx, - .stop_rx = apbuart_stop_rx, - .enable_ms = apbuart_enable_ms, - .break_ctl = apbuart_break_ctl, - .startup = apbuart_startup, - .shutdown = apbuart_shutdown, - .set_termios = apbuart_set_termios, - .type = apbuart_type, - .release_port = apbuart_release_port, - .request_port = apbuart_request_port, - .config_port = apbuart_config_port, - .verify_port = apbuart_verify_port, -}; - -static struct uart_port grlib_apbuart_ports[UART_NR]; -static struct device_node *grlib_apbuart_nodes[UART_NR]; - -static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber) -{ - int ctrl, loop = 0; - int status; - int fifosize; - unsigned long flags; - - ctrl = UART_GET_CTRL(port); - - /* - * Enable the transceiver and wait for it to be ready to send data. - * Clear interrupts so that this process will not be externally - * interrupted in the middle (which can cause the transceiver to - * drain prematurely). - */ - - local_irq_save(flags); - - UART_PUT_CTRL(port, ctrl | UART_CTRL_TE); - - while (!UART_TX_READY(UART_GET_STATUS(port))) - loop++; - - /* - * Disable the transceiver so data isn't actually sent during the - * actual test. - */ - - UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE)); - - fifosize = 1; - UART_PUT_CHAR(port, 0); - - /* - * So long as transmitting a character increments the tranceivier FIFO - * length the FIFO must be at least that big. These bytes will - * automatically drain off of the FIFO. - */ - - status = UART_GET_STATUS(port); - while (((status >> 20) & 0x3F) == fifosize) { - fifosize++; - UART_PUT_CHAR(port, 0); - status = UART_GET_STATUS(port); - } - - fifosize--; - - UART_PUT_CTRL(port, ctrl); - local_irq_restore(flags); - - if (fifosize == 0) - fifosize = 1; - - return fifosize; -} - -static void apbuart_flush_fifo(struct uart_port *port) -{ - int i; - - for (i = 0; i < port->fifosize; i++) - UART_GET_CHAR(port); -} - - -/* ======================================================================== */ -/* Console driver, if enabled */ -/* ======================================================================== */ - -#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE - -static void apbuart_console_putchar(struct uart_port *port, int ch) -{ - unsigned int status; - do { - status = UART_GET_STATUS(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, ch); -} - -static void -apbuart_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &grlib_apbuart_ports[co->index]; - unsigned int status, old_cr, new_cr; - - /* First save the CR then disable the interrupts */ - old_cr = UART_GET_CTRL(port); - new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI); - UART_PUT_CTRL(port, new_cr); - - uart_console_write(port, s, count, apbuart_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = UART_GET_STATUS(port); - } while (!UART_TX_READY(status)); - UART_PUT_CTRL(port, old_cr); -} - -static void __init -apbuart_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) { - - unsigned int quot, status; - status = UART_GET_STATUS(port); - - *parity = 'n'; - if (status & UART_CTRL_PE) { - if ((status & UART_CTRL_PS) == 0) - *parity = 'e'; - else - *parity = 'o'; - } - - *bits = 8; - quot = UART_GET_SCAL(port) / 8; - *baud = port->uartclk / (16 * (quot + 1)); - } -} - -static int __init apbuart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n", - co, co->index, options); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= grlib_apbuart_port_nr) - co->index = 0; - - port = &grlib_apbuart_ports[co->index]; - - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - apbuart_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver grlib_apbuart_driver; - -static struct console grlib_apbuart_console = { - .name = "ttyS", - .write = apbuart_console_write, - .device = uart_console_device, - .setup = apbuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &grlib_apbuart_driver, -}; - - -static int grlib_apbuart_configure(void); - -static int __init apbuart_console_init(void) -{ - if (grlib_apbuart_configure()) - return -ENODEV; - register_console(&grlib_apbuart_console); - return 0; -} - -console_initcall(apbuart_console_init); - -#define APBUART_CONSOLE (&grlib_apbuart_console) -#else -#define APBUART_CONSOLE NULL -#endif - -static struct uart_driver grlib_apbuart_driver = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = SERIAL_APBUART_MAJOR, - .minor = SERIAL_APBUART_MINOR, - .nr = UART_NR, - .cons = APBUART_CONSOLE, -}; - - -/* ======================================================================== */ -/* OF Platform Driver */ -/* ======================================================================== */ - -static int __devinit apbuart_probe(struct platform_device *op, - const struct of_device_id *match) -{ - int i = -1; - struct uart_port *port = NULL; - - i = 0; - for (i = 0; i < grlib_apbuart_port_nr; i++) { - if (op->dev.of_node == grlib_apbuart_nodes[i]) - break; - } - - port = &grlib_apbuart_ports[i]; - port->dev = &op->dev; - - uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port); - - apbuart_flush_fifo((struct uart_port *) port); - - printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", - (unsigned long long) port->mapbase, port->irq); - return 0; -} - -static struct of_device_id __initdata apbuart_match[] = { - { - .name = "GAISLER_APBUART", - }, - { - .name = "01_00c", - }, - {}, -}; - -static struct of_platform_driver grlib_apbuart_of_driver = { - .probe = apbuart_probe, - .driver = { - .owner = THIS_MODULE, - .name = "grlib-apbuart", - .of_match_table = apbuart_match, - }, -}; - - -static int grlib_apbuart_configure(void) -{ - struct device_node *np, *rp; - const u32 *prop; - int freq_khz, line = 0; - - /* Get bus frequency */ - rp = of_find_node_by_path("/"); - if (!rp) - return -ENODEV; - rp = of_get_next_child(rp, NULL); - if (!rp) - return -ENODEV; - prop = of_get_property(rp, "clock-frequency", NULL); - if (!prop) - return -ENODEV; - freq_khz = *prop; - - for_each_matching_node(np, apbuart_match) { - const int *irqs, *ampopts; - const struct amba_prom_registers *regs; - struct uart_port *port; - unsigned long addr; - - ampopts = of_get_property(np, "ampopts", NULL); - if (ampopts && (*ampopts == 0)) - continue; /* Ignore if used by another OS instance */ - - irqs = of_get_property(np, "interrupts", NULL); - regs = of_get_property(np, "reg", NULL); - - if (!irqs || !regs) - continue; - - grlib_apbuart_nodes[line] = np; - - addr = regs->phys_addr; - - port = &grlib_apbuart_ports[line]; - - port->mapbase = addr; - port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); - port->irq = *irqs; - port->iotype = UPIO_MEM; - port->ops = &grlib_apbuart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->line = line; - port->uartclk = freq_khz * 1000; - port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); - line++; - - /* We support maximum UART_NR uarts ... */ - if (line == UART_NR) - break; - } - - grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line; - return line ? 0 : -ENODEV; -} - -static int __init grlib_apbuart_init(void) -{ - int ret; - - /* Find all APBUARTS in device the tree and initialize their ports */ - ret = grlib_apbuart_configure(); - if (ret) - return ret; - - printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); - - ret = uart_register_driver(&grlib_apbuart_driver); - - if (ret) { - printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", - __FILE__, ret); - return ret; - } - - ret = of_register_platform_driver(&grlib_apbuart_of_driver); - if (ret) { - printk(KERN_ERR - "%s: of_register_platform_driver failed (%i)\n", - __FILE__, ret); - uart_unregister_driver(&grlib_apbuart_driver); - return ret; - } - - return ret; -} - -static void __exit grlib_apbuart_exit(void) -{ - int i; - - for (i = 0; i < grlib_apbuart_port_nr; i++) - uart_remove_one_port(&grlib_apbuart_driver, - &grlib_apbuart_ports[i]); - - uart_unregister_driver(&grlib_apbuart_driver); - of_unregister_platform_driver(&grlib_apbuart_of_driver); -} - -module_init(grlib_apbuart_init); -module_exit(grlib_apbuart_exit); - -MODULE_AUTHOR("Aeroflex Gaisler AB"); -MODULE_DESCRIPTION("GRLIB APBUART serial driver"); -MODULE_VERSION("2.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h deleted file mode 100644 index 5faf87c..0000000 --- a/drivers/serial/apbuart.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __GRLIB_APBUART_H__ -#define __GRLIB_APBUART_H__ - -#include - -#define UART_NR 8 -static int grlib_apbuart_port_nr; - -struct grlib_apbuart_regs_map { - u32 data; - u32 status; - u32 ctrl; - u32 scaler; -}; - -struct amba_prom_registers { - unsigned int phys_addr; - unsigned int reg_size; -}; - -/* - * The following defines the bits in the APBUART Status Registers. - */ -#define UART_STATUS_DR 0x00000001 /* Data Ready */ -#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ -#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ -#define UART_STATUS_BR 0x00000008 /* Break Error */ -#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */ -#define UART_STATUS_PE 0x00000020 /* RX Parity Error */ -#define UART_STATUS_FE 0x00000040 /* RX Framing Error */ -#define UART_STATUS_ERR 0x00000078 /* Error Mask */ - -/* - * The following defines the bits in the APBUART Ctrl Registers. - */ -#define UART_CTRL_RE 0x00000001 /* Receiver enable */ -#define UART_CTRL_TE 0x00000002 /* Transmitter enable */ -#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */ -#define UART_CTRL_TI 0x00000008 /* Transmitter irq */ -#define UART_CTRL_PS 0x00000010 /* Parity select */ -#define UART_CTRL_PE 0x00000020 /* Parity enable */ -#define UART_CTRL_FL 0x00000040 /* Flow control enable */ -#define UART_CTRL_LB 0x00000080 /* Loopback enable */ - -#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase)) - -#define APBBASE_DATA_P(port) (&(APBBASE(port)->data)) -#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status)) -#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl)) -#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler)) - -#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port))) -#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port))) -#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port))) -#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port))) -#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port))) -#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port))) -#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port))) -#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port))) - -#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0) -#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0) - -#endif /* __GRLIB_APBUART_H__ */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c deleted file mode 100644 index 3892666..0000000 --- a/drivers/serial/atmel_serial.c +++ /dev/null @@ -1,1808 +0,0 @@ -/* - * linux/drivers/char/atmel_serial.c - * - * Driver for Atmel AT91 / AT32 Serial ports - * Copyright (C) 2003 Rick Bronson - * - * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * DMA support added by Chip Coldwell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#ifdef CONFIG_ARM -#include -#include -#endif - -#define PDC_BUFFER_SIZE 512 -/* Revisit: We should calculate this based on the actual port settings */ -#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ - -#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -static void atmel_start_rx(struct uart_port *port); -static void atmel_stop_rx(struct uart_port *port); - -#ifdef CONFIG_SERIAL_ATMEL_TTYAT - -/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we - * should coexist with the 8250 driver, such as if we have an external 16C550 - * UART. */ -#define SERIAL_ATMEL_MAJOR 204 -#define MINOR_START 154 -#define ATMEL_DEVICENAME "ttyAT" - -#else - -/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port - * name, but it is legally reserved for the 8250 driver. */ -#define SERIAL_ATMEL_MAJOR TTY_MAJOR -#define MINOR_START 64 -#define ATMEL_DEVICENAME "ttyS" - -#endif - -#define ATMEL_ISR_PASS_LIMIT 256 - -/* UART registers. CR is write-only, hence no GET macro */ -#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR) -#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) -#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR) -#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER) -#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) -#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) -#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) -#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) -#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR) -#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) -#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) -#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) -#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) - - /* PDC registers */ -#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) -#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) - -#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) -#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) -#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) -#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) -#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) - -#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) -#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) -#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) - -static int (*atmel_open_hook)(struct uart_port *); -static void (*atmel_close_hook)(struct uart_port *); - -struct atmel_dma_buffer { - unsigned char *buf; - dma_addr_t dma_addr; - unsigned int dma_size; - unsigned int ofs; -}; - -struct atmel_uart_char { - u16 status; - u16 ch; -}; - -#define ATMEL_SERIAL_RINGSIZE 1024 - -/* - * We wrap our port structure around the generic uart_port. - */ -struct atmel_uart_port { - struct uart_port uart; /* uart */ - struct clk *clk; /* uart clock */ - int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ - u32 backup_imr; /* IMR saved during suspend */ - int break_active; /* break being received */ - - short use_dma_rx; /* enable PDC receiver */ - short pdc_rx_idx; /* current PDC RX buffer */ - struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ - - short use_dma_tx; /* enable PDC transmitter */ - struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ - - struct tasklet_struct tasklet; - unsigned int irq_status; - unsigned int irq_status_prev; - - struct circ_buf rx_ring; - - struct serial_rs485 rs485; /* rs485 settings */ - unsigned int tx_done_mask; -}; - -static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; - -#ifdef SUPPORT_SYSRQ -static struct console atmel_console; -#endif - -static inline struct atmel_uart_port * -to_atmel_uart_port(struct uart_port *uart) -{ - return container_of(uart, struct atmel_uart_port, uart); -} - -#ifdef CONFIG_SERIAL_ATMEL_PDC -static bool atmel_use_dma_rx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - return atmel_port->use_dma_rx; -} - -static bool atmel_use_dma_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - return atmel_port->use_dma_tx; -} -#else -static bool atmel_use_dma_rx(struct uart_port *port) -{ - return false; -} - -static bool atmel_use_dma_tx(struct uart_port *port) -{ - return false; -} -#endif - -/* Enable or disable the rs485 support */ -void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int mode; - - spin_lock(&port->lock); - - /* Disable interrupts */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - - mode = UART_GET_MR(port); - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - atmel_port->rs485 = *rs485conf; - - if (rs485conf->flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - if (atmel_use_dma_tx(port)) - atmel_port->tx_done_mask = ATMEL_US_ENDTX | - ATMEL_US_TXBUFE; - else - atmel_port->tx_done_mask = ATMEL_US_TXRDY; - } - UART_PUT_MR(port, mode); - - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); - - spin_unlock(&port->lock); - -} - -/* - * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. - */ -static u_int atmel_tx_empty(struct uart_port *port) -{ - return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0; -} - -/* - * Set state of the modem control output lines - */ -static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) -{ - unsigned int control = 0; - unsigned int mode; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } - } -#endif - - if (mctrl & TIOCM_RTS) - control |= ATMEL_US_RTSEN; - else - control |= ATMEL_US_RTSDIS; - - if (mctrl & TIOCM_DTR) - control |= ATMEL_US_DTREN; - else - control |= ATMEL_US_DTRDIS; - - UART_PUT_CR(port, control); - - /* Local loopback mode? */ - mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; - if (mctrl & TIOCM_LOOP) - mode |= ATMEL_US_CHMODE_LOC_LOOP; - else - mode |= ATMEL_US_CHMODE_NORMAL; - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, - atmel_port->rs485.delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - } - UART_PUT_MR(port, mode); -} - -/* - * Get state of the modem control input lines - */ -static u_int atmel_get_mctrl(struct uart_port *port) -{ - unsigned int status, ret = 0; - - status = UART_GET_CSR(port); - - /* - * The control signals are active low. - */ - if (!(status & ATMEL_US_DCD)) - ret |= TIOCM_CD; - if (!(status & ATMEL_US_CTS)) - ret |= TIOCM_CTS; - if (!(status & ATMEL_US_DSR)) - ret |= TIOCM_DSR; - if (!(status & ATMEL_US_RI)) - ret |= TIOCM_RI; - - return ret; -} - -/* - * Stop transmitting. - */ -static void atmel_stop_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - /* disable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - } - /* Disable interrupts */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_start_rx(port); -} - -/* - * Start transmitting. - */ -static void atmel_start_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) - /* The transmitter is already running. Yes, we - really need this.*/ - return; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_stop_rx(port); - - /* re-enable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - } - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); -} - -/* - * start receiving - port is in process of being opened. - */ -static void atmel_start_rx(struct uart_port *port) -{ - UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ - - if (atmel_use_dma_rx(port)) { - /* enable PDC controller */ - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | - port->read_status_mask); - UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); - } else { - UART_PUT_IER(port, ATMEL_US_RXRDY); - } -} - -/* - * Stop receiving - port is in process of being closed. - */ -static void atmel_stop_rx(struct uart_port *port) -{ - if (atmel_use_dma_rx(port)) { - /* disable PDC receive */ - UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | - port->read_status_mask); - } else { - UART_PUT_IDR(port, ATMEL_US_RXRDY); - } -} - -/* - * Enable modem status interrupts - */ -static void atmel_enable_ms(struct uart_port *port) -{ - UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC - | ATMEL_US_DCDIC | ATMEL_US_CTSIC); -} - -/* - * Control the transmission of a break signal - */ -static void atmel_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state != 0) - UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */ - else - UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */ -} - -/* - * Stores the incoming character in the ring buffer - */ -static void -atmel_buffer_rx_char(struct uart_port *port, unsigned int status, - unsigned int ch) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *ring = &atmel_port->rx_ring; - struct atmel_uart_char *c; - - if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE)) - /* Buffer overflow, ignore char */ - return; - - c = &((struct atmel_uart_char *)ring->buf)[ring->head]; - c->status = status; - c->ch = ch; - - /* Make sure the character is stored before we update head. */ - smp_wmb(); - - ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1); -} - -/* - * Deal with parity, framing and overrun errors. - */ -static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) -{ - /* clear error */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - - if (status & ATMEL_US_RXBRK) { - /* ignore side-effect */ - status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); - port->icount.brk++; - } - if (status & ATMEL_US_PARE) - port->icount.parity++; - if (status & ATMEL_US_FRAME) - port->icount.frame++; - if (status & ATMEL_US_OVRE) - port->icount.overrun++; -} - -/* - * Characters received (called from interrupt handler) - */ -static void atmel_rx_chars(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status, ch; - - status = UART_GET_CSR(port); - while (status & ATMEL_US_RXRDY) { - ch = UART_GET_CHAR(port); - - /* - * note that the error handling code is - * out of the main execution path - */ - if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME - | ATMEL_US_OVRE | ATMEL_US_RXBRK) - || atmel_port->break_active)) { - - /* clear error */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - - if (status & ATMEL_US_RXBRK - && !atmel_port->break_active) { - atmel_port->break_active = 1; - UART_PUT_IER(port, ATMEL_US_RXBRK); - } else { - /* - * This is either the end-of-break - * condition or we've received at - * least one character without RXBRK - * being set. In both cases, the next - * RXBRK will indicate start-of-break. - */ - UART_PUT_IDR(port, ATMEL_US_RXBRK); - status &= ~ATMEL_US_RXBRK; - atmel_port->break_active = 0; - } - } - - atmel_buffer_rx_char(port, status, ch); - status = UART_GET_CSR(port); - } - - tasklet_schedule(&atmel_port->tasklet); -} - -/* - * Transmit characters (called from tasklet with TXRDY interrupt - * disabled) - */ -static void atmel_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!uart_circ_empty(xmit)) - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); -} - -/* - * receive interrupt handler. - */ -static void -atmel_handle_receive(struct uart_port *port, unsigned int pending) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_rx(port)) { - /* - * PDC receive. Just schedule the tasklet and let it - * figure out the details. - * - * TODO: We're not handling error flags correctly at - * the moment. - */ - if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) { - UART_PUT_IDR(port, (ATMEL_US_ENDRX - | ATMEL_US_TIMEOUT)); - tasklet_schedule(&atmel_port->tasklet); - } - - if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | - ATMEL_US_FRAME | ATMEL_US_PARE)) - atmel_pdc_rxerr(port, pending); - } - - /* Interrupt receive */ - if (pending & ATMEL_US_RXRDY) - atmel_rx_chars(port); - else if (pending & ATMEL_US_RXBRK) { - /* - * End of break detected. If it came along with a - * character, atmel_rx_chars will handle it. - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, ATMEL_US_RXBRK); - atmel_port->break_active = 0; - } -} - -/* - * transmit interrupt handler. (Transmit is IRQF_NODELAY safe) - */ -static void -atmel_handle_transmit(struct uart_port *port, unsigned int pending) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - tasklet_schedule(&atmel_port->tasklet); - } -} - -/* - * status flags interrupt handler. - */ -static void -atmel_handle_status(struct uart_port *port, unsigned int pending, - unsigned int status) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC - | ATMEL_US_CTSIC)) { - atmel_port->irq_status = status; - tasklet_schedule(&atmel_port->tasklet); - } -} - -/* - * Interrupt handler - */ -static irqreturn_t atmel_interrupt(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status, pending, pass_counter = 0; - - do { - status = UART_GET_CSR(port); - pending = status & UART_GET_IMR(port); - if (!pending) - break; - - atmel_handle_receive(port, pending); - atmel_handle_status(port, pending, status); - atmel_handle_transmit(port, pending); - } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); - - return pass_counter ? IRQ_HANDLED : IRQ_NONE; -} - -/* - * Called from tasklet with ENDTX and TXBUFE interrupts disabled. - */ -static void atmel_tx_dma(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *xmit = &port->state->xmit; - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - int count; - - /* nothing left to transmit? */ - if (UART_GET_TCR(port)) - return; - - xmit->tail += pdc->ofs; - xmit->tail &= UART_XMIT_SIZE - 1; - - port->icount.tx += pdc->ofs; - pdc->ofs = 0; - - /* more to transmit - setup next transfer */ - - /* disable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - - if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { - dma_sync_single_for_device(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_TO_DEVICE); - - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - pdc->ofs = count; - - UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); - UART_PUT_TCR(port, count); - /* re-enable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); - } else { - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void atmel_rx_from_ring(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *ring = &atmel_port->rx_ring; - unsigned int flg; - unsigned int status; - - while (ring->head != ring->tail) { - struct atmel_uart_char c; - - /* Make sure c is loaded after head. */ - smp_rmb(); - - c = ((struct atmel_uart_char *)ring->buf)[ring->tail]; - - ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1); - - port->icount.rx++; - status = c.status; - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME - | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { - if (status & ATMEL_US_RXBRK) { - /* ignore side-effect */ - status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); - - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } - if (status & ATMEL_US_PARE) - port->icount.parity++; - if (status & ATMEL_US_FRAME) - port->icount.frame++; - if (status & ATMEL_US_OVRE) - port->icount.overrun++; - - status &= port->read_status_mask; - - if (status & ATMEL_US_RXBRK) - flg = TTY_BREAK; - else if (status & ATMEL_US_PARE) - flg = TTY_PARITY; - else if (status & ATMEL_US_FRAME) - flg = TTY_FRAME; - } - - - if (uart_handle_sysrq_char(port, c.ch)) - continue; - - uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); - } - - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); - tty_flip_buffer_push(port->state->port.tty); - spin_lock(&port->lock); -} - -static void atmel_rx_from_dma(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct tty_struct *tty = port->state->port.tty; - struct atmel_dma_buffer *pdc; - int rx_idx = atmel_port->pdc_rx_idx; - unsigned int head; - unsigned int tail; - unsigned int count; - - do { - /* Reset the UART timeout early so that we don't miss one */ - UART_PUT_CR(port, ATMEL_US_STTTO); - - pdc = &atmel_port->pdc_rx[rx_idx]; - head = UART_GET_RPR(port) - pdc->dma_addr; - tail = pdc->ofs; - - /* If the PDC has switched buffers, RPR won't contain - * any address within the current buffer. Since head - * is unsigned, we just need a one-way comparison to - * find out. - * - * In this case, we just need to consume the entire - * buffer and resubmit it for DMA. This will clear the - * ENDRX bit as well, so that we can safely re-enable - * all interrupts below. - */ - head = min(head, pdc->dma_size); - - if (likely(head != tail)) { - dma_sync_single_for_cpu(port->dev, pdc->dma_addr, - pdc->dma_size, DMA_FROM_DEVICE); - - /* - * head will only wrap around when we recycle - * the DMA buffer, and when that happens, we - * explicitly set tail to 0. So head will - * always be greater than tail. - */ - count = head - tail; - - tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); - - dma_sync_single_for_device(port->dev, pdc->dma_addr, - pdc->dma_size, DMA_FROM_DEVICE); - - port->icount.rx += count; - pdc->ofs = head; - } - - /* - * If the current buffer is full, we need to check if - * the next one contains any additional data. - */ - if (head >= pdc->dma_size) { - pdc->ofs = 0; - UART_PUT_RNPR(port, pdc->dma_addr); - UART_PUT_RNCR(port, pdc->dma_size); - - rx_idx = !rx_idx; - atmel_port->pdc_rx_idx = rx_idx; - } - } while (head >= pdc->dma_size); - - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); - tty_flip_buffer_push(tty); - spin_lock(&port->lock); - - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); -} - -/* - * tasklet handling tty stuff outside the interrupt handler. - */ -static void atmel_tasklet_func(unsigned long data) -{ - struct uart_port *port = (struct uart_port *)data; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status; - unsigned int status_change; - - /* The interrupt handler does not take the lock */ - spin_lock(&port->lock); - - if (atmel_use_dma_tx(port)) - atmel_tx_dma(port); - else - atmel_tx_chars(port); - - status = atmel_port->irq_status; - status_change = status ^ atmel_port->irq_status_prev; - - if (status_change & (ATMEL_US_RI | ATMEL_US_DSR - | ATMEL_US_DCD | ATMEL_US_CTS)) { - /* TODO: All reads to CSR will clear these interrupts! */ - if (status_change & ATMEL_US_RI) - port->icount.rng++; - if (status_change & ATMEL_US_DSR) - port->icount.dsr++; - if (status_change & ATMEL_US_DCD) - uart_handle_dcd_change(port, !(status & ATMEL_US_DCD)); - if (status_change & ATMEL_US_CTS) - uart_handle_cts_change(port, !(status & ATMEL_US_CTS)); - - wake_up_interruptible(&port->state->port.delta_msr_wait); - - atmel_port->irq_status_prev = status; - } - - if (atmel_use_dma_rx(port)) - atmel_rx_from_dma(port); - else - atmel_rx_from_ring(port); - - spin_unlock(&port->lock); -} - -/* - * Perform initialization and enable port for reception - */ -static int atmel_startup(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct tty_struct *tty = port->state->port.tty; - int retval; - - /* - * Ensure that no interrupts are enabled otherwise when - * request_irq() is called we could get stuck trying to - * handle an unexpected interrupt - */ - UART_PUT_IDR(port, -1); - - /* - * Allocate the IRQ - */ - retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, - tty ? tty->name : "atmel_serial", port); - if (retval) { - printk("atmel_serial: atmel_startup - Can't get irq\n"); - return retval; - } - - /* - * Initialize DMA (if necessary) - */ - if (atmel_use_dma_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); - if (pdc->buf == NULL) { - if (i != 0) { - dma_unmap_single(port->dev, - atmel_port->pdc_rx[0].dma_addr, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - kfree(atmel_port->pdc_rx[0].buf); - } - free_irq(port->irq, port); - return -ENOMEM; - } - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - pdc->dma_size = PDC_BUFFER_SIZE; - pdc->ofs = 0; - } - - atmel_port->pdc_rx_idx = 0; - - UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); - UART_PUT_RCR(port, PDC_BUFFER_SIZE); - - UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); - UART_PUT_RNCR(port, PDC_BUFFER_SIZE); - } - if (atmel_use_dma_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - struct circ_buf *xmit = &port->state->xmit; - - pdc->buf = xmit->buf; - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - pdc->dma_size = UART_XMIT_SIZE; - pdc->ofs = 0; - } - - /* - * If there is a specific "open" function (to register - * control line interrupts) - */ - if (atmel_open_hook) { - retval = atmel_open_hook(port); - if (retval) { - free_irq(port->irq, port); - return retval; - } - } - - /* Save current CSR for comparison in atmel_tasklet_func() */ - atmel_port->irq_status_prev = UART_GET_CSR(port); - atmel_port->irq_status = atmel_port->irq_status_prev; - - /* - * Finally, enable the serial port - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - /* enable xmit & rcvr */ - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - if (atmel_use_dma_rx(port)) { - /* set UART timeout */ - UART_PUT_RTOR(port, PDC_RX_TIMEOUT); - UART_PUT_CR(port, ATMEL_US_STTTO); - - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); - /* enable PDC controller */ - UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); - } else { - /* enable receive only */ - UART_PUT_IER(port, ATMEL_US_RXRDY); - } - - return 0; -} - -/* - * Disable the port - */ -static void atmel_shutdown(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - /* - * Ensure everything is stopped. - */ - atmel_stop_rx(port); - atmel_stop_tx(port); - - /* - * Shut-down the DMA. - */ - if (atmel_use_dma_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_FROM_DEVICE); - kfree(pdc->buf); - } - } - if (atmel_use_dma_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_TO_DEVICE); - } - - /* - * Disable all interrupts, port and break condition. - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, -1); - - /* - * Free the interrupt - */ - free_irq(port->irq, port); - - /* - * If there is a specific "close" function (to unregister - * control line interrupts) - */ - if (atmel_close_hook) - atmel_close_hook(port); -} - -/* - * Flush any TX data submitted for DMA. Called when the TX circular - * buffer is reset. - */ -static void atmel_flush_buffer(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - UART_PUT_TCR(port, 0); - atmel_port->pdc_tx.ofs = 0; - } -} - -/* - * Power / Clock management. - */ -static void atmel_serial_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - switch (state) { - case 0: - /* - * Enable the peripheral clock for this serial port. - * This is called on uart_open() or a resume event. - */ - clk_enable(atmel_port->clk); - - /* re-enable interrupts if we disabled some on suspend */ - UART_PUT_IER(port, atmel_port->backup_imr); - break; - case 3: - /* Back up the interrupt mask and disable all interrupts */ - atmel_port->backup_imr = UART_GET_IMR(port); - UART_PUT_IDR(port, -1); - - /* - * Disable the peripheral clock for this serial port. - * This is called on uart_close() or a suspend event. - */ - clk_disable(atmel_port->clk); - break; - default: - printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); - } -} - -/* - * Change the port parameters - */ -static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int mode, imr, quot, baud; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - /* Get current mode register */ - mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL - | ATMEL_US_NBSTOP | ATMEL_US_PAR - | ATMEL_US_USMODE); - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - - if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ - quot /= 8; - mode |= ATMEL_US_USCLKS_MCK_DIV8; - } - - /* byte size */ - switch (termios->c_cflag & CSIZE) { - case CS5: - mode |= ATMEL_US_CHRL_5; - break; - case CS6: - mode |= ATMEL_US_CHRL_6; - break; - case CS7: - mode |= ATMEL_US_CHRL_7; - break; - default: - mode |= ATMEL_US_CHRL_8; - break; - } - - /* stop bits */ - if (termios->c_cflag & CSTOPB) - mode |= ATMEL_US_NBSTOP_2; - - /* parity */ - if (termios->c_cflag & PARENB) { - /* Mark or Space parity */ - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - mode |= ATMEL_US_PAR_MARK; - else - mode |= ATMEL_US_PAR_SPACE; - } else if (termios->c_cflag & PARODD) - mode |= ATMEL_US_PAR_ODD; - else - mode |= ATMEL_US_PAR_EVEN; - } else - mode |= ATMEL_US_PAR_NONE; - - /* hardware handshake (RTS/CTS) */ - if (termios->c_cflag & CRTSCTS) - mode |= ATMEL_US_USMODE_HWHS; - else - mode |= ATMEL_US_USMODE_NORMAL; - - spin_lock_irqsave(&port->lock, flags); - - port->read_status_mask = ATMEL_US_OVRE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= ATMEL_US_RXBRK; - - if (atmel_use_dma_rx(port)) - /* need to enable error interrupts */ - UART_PUT_IER(port, port->read_status_mask); - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= ATMEL_US_RXBRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ATMEL_US_OVRE; - } - /* TODO: Ignore all characters if CREAD is set.*/ - - /* update the per-port timeout */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * save/disable interrupts. The tty layer will ensure that the - * transmitter is empty if requested by the caller, so there's - * no need to wait for it here. - */ - imr = UART_GET_IMR(port); - UART_PUT_IDR(port, -1); - - /* disable receiver and transmitter */ - UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, - atmel_port->rs485.delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - } - - /* set the parity, stop bits and data size */ - UART_PUT_MR(port, mode); - - /* set the baud rate */ - UART_PUT_BRGR(port, quot); - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - /* restore interrupts */ - UART_PUT_IER(port, imr); - - /* CTS flow-control and modem-status interrupts */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - port->ops->enable_ms(port); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * Return string describing the specified port - */ -static const char *atmel_type(struct uart_port *port) -{ - return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void atmel_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; - - release_mem_region(port->mapbase, size); - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int atmel_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; - - if (!request_mem_region(port->mapbase, size, "atmel_serial")) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_mem_region(port->mapbase, size); - return -ENOMEM; - } - } - - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void atmel_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_ATMEL; - atmel_request_port(port); - } -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - */ -static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) - ret = -EINVAL; - if (port->irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (port->uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)port->mapbase != ser->iomem_base) - ret = -EINVAL; - if (port->iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -#ifdef CONFIG_CONSOLE_POLL -static int atmel_poll_get_char(struct uart_port *port) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) - cpu_relax(); - - return UART_GET_CHAR(port); -} - -static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) - cpu_relax(); - - UART_PUT_CHAR(port, ch); -} -#endif - -static int -atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) -{ - struct serial_rs485 rs485conf; - - switch (cmd) { - case TIOCSRS485: - if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, - sizeof(rs485conf))) - return -EFAULT; - - atmel_config_rs485(port, &rs485conf); - break; - - case TIOCGRS485: - if (copy_to_user((struct serial_rs485 *) arg, - &(to_atmel_uart_port(port)->rs485), - sizeof(rs485conf))) - return -EFAULT; - break; - - default: - return -ENOIOCTLCMD; - } - return 0; -} - - - -static struct uart_ops atmel_pops = { - .tx_empty = atmel_tx_empty, - .set_mctrl = atmel_set_mctrl, - .get_mctrl = atmel_get_mctrl, - .stop_tx = atmel_stop_tx, - .start_tx = atmel_start_tx, - .stop_rx = atmel_stop_rx, - .enable_ms = atmel_enable_ms, - .break_ctl = atmel_break_ctl, - .startup = atmel_startup, - .shutdown = atmel_shutdown, - .flush_buffer = atmel_flush_buffer, - .set_termios = atmel_set_termios, - .type = atmel_type, - .release_port = atmel_release_port, - .request_port = atmel_request_port, - .config_port = atmel_config_port, - .verify_port = atmel_verify_port, - .pm = atmel_serial_pm, - .ioctl = atmel_ioctl, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = atmel_poll_get_char, - .poll_put_char = atmel_poll_put_char, -#endif -}; - -/* - * Configure the port from the platform device resource info. - */ -static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, - struct platform_device *pdev) -{ - struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *data = pdev->dev.platform_data; - - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &atmel_pops; - port->fifosize = 1; - port->line = pdev->id; - port->dev = &pdev->dev; - port->mapbase = pdev->resource[0].start; - port->irq = pdev->resource[1].start; - - tasklet_init(&atmel_port->tasklet, atmel_tasklet_func, - (unsigned long)port); - - memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); - - if (data->regs) - /* Already mapped by setup code */ - port->membase = data->regs; - else { - port->flags |= UPF_IOREMAP; - port->membase = NULL; - } - - /* for console, the clock could already be configured */ - if (!atmel_port->clk) { - atmel_port->clk = clk_get(&pdev->dev, "usart"); - clk_enable(atmel_port->clk); - port->uartclk = clk_get_rate(atmel_port->clk); - clk_disable(atmel_port->clk); - /* only enable clock when USART is in use */ - } - - atmel_port->use_dma_rx = data->use_dma_rx; - atmel_port->use_dma_tx = data->use_dma_tx; - atmel_port->rs485 = data->rs485; - /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - else if (atmel_use_dma_tx(port)) { - port->fifosize = PDC_BUFFER_SIZE; - atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; - } else { - atmel_port->tx_done_mask = ATMEL_US_TXRDY; - } -} - -/* - * Register board-specific modem-control line handlers. - */ -void __init atmel_register_uart_fns(struct atmel_port_fns *fns) -{ - if (fns->enable_ms) - atmel_pops.enable_ms = fns->enable_ms; - if (fns->get_mctrl) - atmel_pops.get_mctrl = fns->get_mctrl; - if (fns->set_mctrl) - atmel_pops.set_mctrl = fns->set_mctrl; - atmel_open_hook = fns->open; - atmel_close_hook = fns->close; - atmel_pops.pm = fns->pm; - atmel_pops.set_wake = fns->set_wake; -} - -#ifdef CONFIG_SERIAL_ATMEL_CONSOLE -static void atmel_console_putchar(struct uart_port *port, int ch) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) - cpu_relax(); - UART_PUT_CHAR(port, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void atmel_console_write(struct console *co, const char *s, u_int count) -{ - struct uart_port *port = &atmel_ports[co->index].uart; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status, imr; - unsigned int pdc_tx; - - /* - * First, save IMR and then disable interrupts - */ - imr = UART_GET_IMR(port); - UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); - - /* Store PDC transmit status and disable it */ - pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - - uart_console_write(port, s, count, atmel_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IMR - */ - do { - status = UART_GET_CSR(port); - } while (!(status & ATMEL_US_TXRDY)); - - /* Restore PDC transmit status */ - if (pdc_tx) - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - - /* set interrupts back the way they were */ - UART_PUT_IER(port, imr); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init atmel_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - unsigned int mr, quot; - - /* - * If the baud rate generator isn't running, the port wasn't - * initialized by the boot loader. - */ - quot = UART_GET_BRGR(port) & ATMEL_US_CD; - if (!quot) - return; - - mr = UART_GET_MR(port) & ATMEL_US_CHRL; - if (mr == ATMEL_US_CHRL_8) - *bits = 8; - else - *bits = 7; - - mr = UART_GET_MR(port) & ATMEL_US_PAR; - if (mr == ATMEL_US_PAR_EVEN) - *parity = 'e'; - else if (mr == ATMEL_US_PAR_ODD) - *parity = 'o'; - - /* - * The serial core only rounds down when matching this to a - * supported baud rate. Make sure we don't end up slightly - * lower than one of those, as it would make us fall through - * to a much lower baud rate than we really want. - */ - *baud = port->uartclk / (16 * (quot - 1)); -} - -static int __init atmel_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &atmel_ports[co->index].uart; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (port->membase == NULL) { - /* Port not initialized yet - delay setup */ - return -ENODEV; - } - - clk_enable(atmel_ports[co->index].clk); - - UART_PUT_IDR(port, -1); - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - atmel_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver atmel_uart; - -static struct console atmel_console = { - .name = ATMEL_DEVICENAME, - .write = atmel_console_write, - .device = uart_console_device, - .setup = atmel_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &atmel_uart, -}; - -#define ATMEL_CONSOLE_DEVICE (&atmel_console) - -/* - * Early console initialization (before VM subsystem initialized). - */ -static int __init atmel_console_init(void) -{ - if (atmel_default_console_device) { - add_preferred_console(ATMEL_DEVICENAME, - atmel_default_console_device->id, NULL); - atmel_init_port(&atmel_ports[atmel_default_console_device->id], - atmel_default_console_device); - register_console(&atmel_console); - } - - return 0; -} - -console_initcall(atmel_console_init); - -/* - * Late console initialization. - */ -static int __init atmel_late_console_init(void) -{ - if (atmel_default_console_device - && !(atmel_console.flags & CON_ENABLED)) - register_console(&atmel_console); - - return 0; -} - -core_initcall(atmel_late_console_init); - -static inline bool atmel_is_console_port(struct uart_port *port) -{ - return port->cons && port->cons->index == port->line; -} - -#else -#define ATMEL_CONSOLE_DEVICE NULL - -static inline bool atmel_is_console_port(struct uart_port *port) -{ - return false; -} -#endif - -static struct uart_driver atmel_uart = { - .owner = THIS_MODULE, - .driver_name = "atmel_serial", - .dev_name = ATMEL_DEVICENAME, - .major = SERIAL_ATMEL_MAJOR, - .minor = MINOR_START, - .nr = ATMEL_MAX_UART, - .cons = ATMEL_CONSOLE_DEVICE, -}; - -#ifdef CONFIG_PM -static bool atmel_serial_clk_will_stop(void) -{ -#ifdef CONFIG_ARCH_AT91 - return at91_suspend_entering_slow_clock(); -#else - return false; -#endif -} - -static int atmel_serial_suspend(struct platform_device *pdev, - pm_message_t state) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_is_console_port(port) && console_suspend_enabled) { - /* Drain the TX shifter */ - while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) - cpu_relax(); - } - - /* we can not wake up if we're running on slow clock */ - atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); - if (atmel_serial_clk_will_stop()) - device_set_wakeup_enable(&pdev->dev, 0); - - uart_suspend_port(&atmel_uart, port); - - return 0; -} - -static int atmel_serial_resume(struct platform_device *pdev) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - uart_resume_port(&atmel_uart, port); - device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); - - return 0; -} -#else -#define atmel_serial_suspend NULL -#define atmel_serial_resume NULL -#endif - -static int __devinit atmel_serial_probe(struct platform_device *pdev) -{ - struct atmel_uart_port *port; - void *data; - int ret; - - BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - - port = &atmel_ports[pdev->id]; - port->backup_imr = 0; - - atmel_init_port(port, pdev); - - if (!atmel_use_dma_rx(&port->uart)) { - ret = -ENOMEM; - data = kmalloc(sizeof(struct atmel_uart_char) - * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); - if (!data) - goto err_alloc_ring; - port->rx_ring.buf = data; - } - - ret = uart_add_one_port(&atmel_uart, &port->uart); - if (ret) - goto err_add_port; - -#ifdef CONFIG_SERIAL_ATMEL_CONSOLE - if (atmel_is_console_port(&port->uart) - && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { - /* - * The serial core enabled the clock for us, so undo - * the clk_enable() in atmel_console_setup() - */ - clk_disable(port->clk); - } -#endif - - device_init_wakeup(&pdev->dev, 1); - platform_set_drvdata(pdev, port); - - return 0; - -err_add_port: - kfree(port->rx_ring.buf); - port->rx_ring.buf = NULL; -err_alloc_ring: - if (!atmel_is_console_port(&port->uart)) { - clk_put(port->clk); - port->clk = NULL; - } - - return ret; -} - -static int __devexit atmel_serial_remove(struct platform_device *pdev) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - int ret = 0; - - device_init_wakeup(&pdev->dev, 0); - platform_set_drvdata(pdev, NULL); - - ret = uart_remove_one_port(&atmel_uart, port); - - tasklet_kill(&atmel_port->tasklet); - kfree(atmel_port->rx_ring.buf); - - /* "port" is allocated statically, so we shouldn't free it */ - - clk_put(atmel_port->clk); - - return ret; -} - -static struct platform_driver atmel_serial_driver = { - .probe = atmel_serial_probe, - .remove = __devexit_p(atmel_serial_remove), - .suspend = atmel_serial_suspend, - .resume = atmel_serial_resume, - .driver = { - .name = "atmel_usart", - .owner = THIS_MODULE, - }, -}; - -static int __init atmel_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&atmel_uart); - if (ret) - return ret; - - ret = platform_driver_register(&atmel_serial_driver); - if (ret) - uart_unregister_driver(&atmel_uart); - - return ret; -} - -static void __exit atmel_serial_exit(void) -{ - platform_driver_unregister(&atmel_serial_driver); - uart_unregister_driver(&atmel_uart); -} - -module_init(atmel_serial_init); -module_exit(atmel_serial_exit); - -MODULE_AUTHOR("Rick Bronson"); -MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:atmel_usart"); diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c deleted file mode 100644 index a1a0e55..0000000 --- a/drivers/serial/bcm63xx_uart.c +++ /dev/null @@ -1,891 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from many drivers using generic_serial interface. - * - * Copyright (C) 2008 Maxime Bizon - * - * Serial driver for BCM63xx integrated UART. - * - * Hardware flow control was _not_ tested since I only have RX/TX on - * my board. - */ - -#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define BCM63XX_NR_UARTS 2 - -static struct uart_port ports[BCM63XX_NR_UARTS]; - -/* - * rx interrupt mask / stat - * - * mask: - * - rx fifo full - * - rx fifo above threshold - * - rx fifo not empty for too long - */ -#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ - UART_IR_MASK(UART_IR_RXTHRESH) | \ - UART_IR_MASK(UART_IR_RXTIMEOUT)) - -#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ - UART_IR_STAT(UART_IR_RXTHRESH) | \ - UART_IR_STAT(UART_IR_RXTIMEOUT)) - -/* - * tx interrupt mask / stat - * - * mask: - * - tx fifo empty - * - tx fifo below threshold - */ -#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ - UART_IR_MASK(UART_IR_TXTRESH)) - -#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ - UART_IR_STAT(UART_IR_TXTRESH)) - -/* - * external input interrupt - * - * mask: any edge on CTS, DCD - */ -#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ - UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) - -/* - * handy uart register accessor - */ -static inline unsigned int bcm_uart_readl(struct uart_port *port, - unsigned int offset) -{ - return bcm_readl(port->membase + offset); -} - -static inline void bcm_uart_writel(struct uart_port *port, - unsigned int value, unsigned int offset) -{ - bcm_writel(value, port->membase + offset); -} - -/* - * serial core request to check if uart tx fifo is empty - */ -static unsigned int bcm_uart_tx_empty(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; -} - -/* - * serial core request to set RTS and DTR pin state and loopback mode - */ -static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); - /* invert of written value is reflected on the pin */ - if (!(mctrl & TIOCM_DTR)) - val |= UART_MCTL_DTR_MASK; - if (!(mctrl & TIOCM_RTS)) - val |= UART_MCTL_RTS_MASK; - bcm_uart_writel(port, val, UART_MCTL_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (mctrl & TIOCM_LOOP) - val |= UART_CTL_LOOPBACK_MASK; - else - val &= ~UART_CTL_LOOPBACK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to return RI, CTS, DCD and DSR pin state - */ -static unsigned int bcm_uart_get_mctrl(struct uart_port *port) -{ - unsigned int val, mctrl; - - mctrl = 0; - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_RI_MASK) - mctrl |= TIOCM_RI; - if (val & UART_EXTINP_CTS_MASK) - mctrl |= TIOCM_CTS; - if (val & UART_EXTINP_DCD_MASK) - mctrl |= TIOCM_CD; - if (val & UART_EXTINP_DSR_MASK) - mctrl |= TIOCM_DSR; - return mctrl; -} - -/* - * serial core request to disable tx ASAP (used for flow control) - */ -static void bcm_uart_stop_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_TXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to (re)enable tx - */ -static void bcm_uart_start_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_TXEN_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to stop rx, called before port shutdown - */ -static void bcm_uart_stop_rx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_RX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to enable modem status interrupt reporting - */ -static void bcm_uart_enable_ms(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_IR_MASK(UART_IR_EXTIP); - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to start/stop emitting break char - */ -static void bcm_uart_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&port->lock, flags); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (ctl) - val |= UART_CTL_XMITBRK_MASK; - else - val &= ~UART_CTL_XMITBRK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * return port type in string format - */ -static const char *bcm_uart_type(struct uart_port *port) -{ - return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; -} - -/* - * read all chars in rx fifo and send them to core - */ -static void bcm_uart_do_rx(struct uart_port *port) -{ - struct tty_struct *tty; - unsigned int max_count; - - /* limit number of char read in interrupt, should not be - * higher than fifo size anyway since we're much faster than - * serial port */ - max_count = 32; - tty = port->state->port.tty; - do { - unsigned int iestat, c, cstat; - char flag; - - /* get overrun/fifo empty information from ier - * register */ - iestat = bcm_uart_readl(port, UART_IR_REG); - if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) - break; - - cstat = c = bcm_uart_readl(port, UART_FIFO_REG); - port->icount.rx++; - flag = TTY_NORMAL; - c &= 0xff; - - if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { - /* do stats first */ - if (cstat & UART_FIFO_BRKDET_MASK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } - - if (cstat & UART_FIFO_PARERR_MASK) - port->icount.parity++; - if (cstat & UART_FIFO_FRAMEERR_MASK) - port->icount.frame++; - - /* update flag wrt read_status_mask */ - cstat &= port->read_status_mask; - if (cstat & UART_FIFO_BRKDET_MASK) - flag = TTY_BREAK; - if (cstat & UART_FIFO_FRAMEERR_MASK) - flag = TTY_FRAME; - if (cstat & UART_FIFO_PARERR_MASK) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(port, c)) - continue; - - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - if ((cstat & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, c, flag); - - } while (--max_count); - - tty_flip_buffer_push(tty); -} - -/* - * fill tx fifo with chars to send, stop when fifo is about to be full - * or when all chars have been sent. - */ -static void bcm_uart_do_tx(struct uart_port *port) -{ - struct circ_buf *xmit; - unsigned int val, max_count; - - if (port->x_char) { - bcm_uart_writel(port, port->x_char, UART_FIFO_REG); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port)) { - bcm_uart_stop_tx(port); - return; - } - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit)) - goto txq_empty; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; - max_count = port->fifosize - val; - - while (max_count--) { - unsigned int c; - - c = xmit->buf[xmit->tail]; - bcm_uart_writel(port, c, UART_FIFO_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - goto txq_empty; - return; - -txq_empty: - /* nothing to send, disable transmit interrupt */ - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - return; -} - -/* - * process uart interrupt - */ -static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) -{ - struct uart_port *port; - unsigned int irqstat; - - port = dev_id; - spin_lock(&port->lock); - - irqstat = bcm_uart_readl(port, UART_IR_REG); - if (irqstat & UART_RX_INT_STAT) - bcm_uart_do_rx(port); - - if (irqstat & UART_TX_INT_STAT) - bcm_uart_do_tx(port); - - if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { - unsigned int estat; - - estat = bcm_uart_readl(port, UART_EXTINP_REG); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) - uart_handle_cts_change(port, - estat & UART_EXTINP_CTS_MASK); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) - uart_handle_dcd_change(port, - estat & UART_EXTINP_DCD_MASK); - } - - spin_unlock(&port->lock); - return IRQ_HANDLED; -} - -/* - * enable rx & tx operation on uart - */ -static void bcm_uart_enable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * disable rx & tx operation on uart - */ -static void bcm_uart_disable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | - UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * clear all unread data in rx fifo and unsent data in tx fifo - */ -static void bcm_uart_flush(struct uart_port *port) -{ - unsigned int val; - - /* empty rx and tx fifo */ - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* read any pending char to make sure all irq status are - * cleared */ - (void)bcm_uart_readl(port, UART_FIFO_REG); -} - -/* - * serial core request to initialize uart and start rx operation - */ -static int bcm_uart_startup(struct uart_port *port) -{ - unsigned int val; - int ret; - - /* mask all irq and flush port */ - bcm_uart_disable(port); - bcm_uart_writel(port, 0, UART_IR_REG); - bcm_uart_flush(port); - - /* clear any pending external input interrupt */ - (void)bcm_uart_readl(port, UART_EXTINP_REG); - - /* set rx/tx fifo thresh to fifo half size */ - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); - val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; - val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; - bcm_uart_writel(port, val, UART_MCTL_REG); - - /* set rx fifo timeout to 1 char time */ - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~UART_CTL_RXTMOUTCNT_MASK; - val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* report any edge on dcd and cts */ - val = UART_EXTINP_INT_MASK; - val |= UART_EXTINP_DCD_NOSENSE_MASK; - val |= UART_EXTINP_CTS_NOSENSE_MASK; - bcm_uart_writel(port, val, UART_EXTINP_REG); - - /* register irq and enable rx interrupts */ - ret = request_irq(port->irq, bcm_uart_interrupt, 0, - bcm_uart_type(port), port); - if (ret) - return ret; - bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); - bcm_uart_enable(port); - return 0; -} - -/* - * serial core request to flush & disable uart - */ -static void bcm_uart_shutdown(struct uart_port *port) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - bcm_uart_writel(port, 0, UART_IR_REG); - spin_unlock_irqrestore(&port->lock, flags); - - bcm_uart_disable(port); - bcm_uart_flush(port); - free_irq(port->irq, port); -} - -/* - * serial core request to change current uart setting - */ -static void bcm_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int ctl, baud, quot, ier; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* disable uart while changing speed */ - bcm_uart_disable(port); - bcm_uart_flush(port); - - /* update Control register */ - ctl = bcm_uart_readl(port, UART_CTL_REG); - ctl &= ~UART_CTL_BITSPERSYM_MASK; - - switch (new->c_cflag & CSIZE) { - case CS5: - ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS6: - ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS7: - ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); - break; - default: - ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); - break; - } - - ctl &= ~UART_CTL_STOPBITS_MASK; - if (new->c_cflag & CSTOPB) - ctl |= UART_CTL_STOPBITS_2; - else - ctl |= UART_CTL_STOPBITS_1; - - ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - if (new->c_cflag & PARENB) - ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - if (new->c_cflag & PARODD) - ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - bcm_uart_writel(port, ctl, UART_CTL_REG); - - /* update Baudword register */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud) - 1; - bcm_uart_writel(port, quot, UART_BAUD_REG); - - /* update Interrupt register */ - ier = bcm_uart_readl(port, UART_IR_REG); - - ier &= ~UART_IR_MASK(UART_IR_EXTIP); - if (UART_ENABLE_MS(port, new->c_cflag)) - ier |= UART_IR_MASK(UART_IR_EXTIP); - - bcm_uart_writel(port, ier, UART_IR_REG); - - /* update read/ignore mask */ - port->read_status_mask = UART_FIFO_VALID_MASK; - if (new->c_iflag & INPCK) { - port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; - port->read_status_mask |= UART_FIFO_PARERR_MASK; - } - if (new->c_iflag & (BRKINT)) - port->read_status_mask |= UART_FIFO_BRKDET_MASK; - - port->ignore_status_mask = 0; - if (new->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_FIFO_PARERR_MASK; - if (new->c_iflag & IGNBRK) - port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; - if (!(new->c_cflag & CREAD)) - port->ignore_status_mask |= UART_FIFO_VALID_MASK; - - uart_update_timeout(port, new->c_cflag, baud); - bcm_uart_enable(port); - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * serial core request to claim uart iomem - */ -static int bcm_uart_request_port(struct uart_port *port) -{ - unsigned int size; - - size = RSET_UART_SIZE; - if (!request_mem_region(port->mapbase, size, "bcm63xx")) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = ioremap(port->mapbase, size); - if (!port->membase) { - dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, size); - return -EBUSY; - } - return 0; -} - -/* - * serial core request to release uart iomem - */ -static void bcm_uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, RSET_UART_SIZE); - iounmap(port->membase); -} - -/* - * serial core request to do any port required autoconfiguration - */ -static void bcm_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - if (bcm_uart_request_port(port)) - return; - port->type = PORT_BCM63XX; - } -} - -/* - * serial core request to check that port information in serinfo are - * suitable - */ -static int bcm_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - if (port->type != PORT_BCM63XX) - return -EINVAL; - if (port->irq != serinfo->irq) - return -EINVAL; - if (port->iotype != serinfo->io_type) - return -EINVAL; - if (port->mapbase != (unsigned long)serinfo->iomem_base) - return -EINVAL; - return 0; -} - -/* serial core callbacks */ -static struct uart_ops bcm_uart_ops = { - .tx_empty = bcm_uart_tx_empty, - .get_mctrl = bcm_uart_get_mctrl, - .set_mctrl = bcm_uart_set_mctrl, - .start_tx = bcm_uart_start_tx, - .stop_tx = bcm_uart_stop_tx, - .stop_rx = bcm_uart_stop_rx, - .enable_ms = bcm_uart_enable_ms, - .break_ctl = bcm_uart_break_ctl, - .startup = bcm_uart_startup, - .shutdown = bcm_uart_shutdown, - .set_termios = bcm_uart_set_termios, - .type = bcm_uart_type, - .release_port = bcm_uart_release_port, - .request_port = bcm_uart_request_port, - .config_port = bcm_uart_config_port, - .verify_port = bcm_uart_verify_port, -}; - - - -#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) -{ - unsigned int tmout; - - /* Wait up to 10ms for the character(s) to be sent. */ - tmout = 10000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - udelay(1); - } - - /* Wait up to 1s for flow control if necessary */ - if (port->flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_CTS_MASK) - break; - udelay(1); - } - } -} - -/* - * output given char - */ -static void bcm_console_putchar(struct uart_port *port, int ch) -{ - wait_for_xmitr(port); - bcm_uart_writel(port, ch, UART_FIFO_REG); -} - -/* - * console core request to output given string - */ -static void bcm_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port; - unsigned long flags; - int locked; - - port = &ports[co->index]; - - local_irq_save(flags); - if (port->sysrq) { - /* bcm_uart_interrupt() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else { - spin_lock(&port->lock); - locked = 1; - } - - /* call helper to deal with \r\n */ - uart_console_write(port, s, count, bcm_console_putchar); - - /* and wait for char to be transmitted */ - wait_for_xmitr(port); - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -/* - * console core request to setup given console, find matching uart - * port and setup it. - */ -static int bcm_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) - return -EINVAL; - port = &ports[co->index]; - if (!port->membase) - return -ENODEV; - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver bcm_uart_driver; - -static struct console bcm63xx_console = { - .name = "ttyS", - .write = bcm_console_write, - .device = uart_console_device, - .setup = bcm_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bcm_uart_driver, -}; - -static int __init bcm63xx_console_init(void) -{ - register_console(&bcm63xx_console); - return 0; -} - -console_initcall(bcm63xx_console_init); - -#define BCM63XX_CONSOLE (&bcm63xx_console) -#else -#define BCM63XX_CONSOLE NULL -#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ - -static struct uart_driver bcm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "bcm63xx_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = BCM63XX_NR_UARTS, - .cons = BCM63XX_CONSOLE, -}; - -/* - * platform driver probe/remove callback - */ -static int __devinit bcm_uart_probe(struct platform_device *pdev) -{ - struct resource *res_mem, *res_irq; - struct uart_port *port; - struct clk *clk; - int ret; - - if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) - return -EINVAL; - - if (ports[pdev->id].membase) - return -EBUSY; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem) - return -ENODEV; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_irq) - return -ENODEV; - - clk = clk_get(&pdev->dev, "periph"); - if (IS_ERR(clk)) - return -ENODEV; - - port = &ports[pdev->id]; - memset(port, 0, sizeof(*port)); - port->iotype = UPIO_MEM; - port->mapbase = res_mem->start; - port->irq = res_irq->start; - port->ops = &bcm_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = &pdev->dev; - port->fifosize = 16; - port->uartclk = clk_get_rate(clk) / 2; - port->line = pdev->id; - clk_put(clk); - - ret = uart_add_one_port(&bcm_uart_driver, port); - if (ret) { - ports[pdev->id].membase = 0; - return ret; - } - platform_set_drvdata(pdev, port); - return 0; -} - -static int __devexit bcm_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - - port = platform_get_drvdata(pdev); - uart_remove_one_port(&bcm_uart_driver, port); - platform_set_drvdata(pdev, NULL); - /* mark port as free */ - ports[pdev->id].membase = 0; - return 0; -} - -/* - * platform driver stuff - */ -static struct platform_driver bcm_uart_platform_driver = { - .probe = bcm_uart_probe, - .remove = __devexit_p(bcm_uart_remove), - .driver = { - .owner = THIS_MODULE, - .name = "bcm63xx_uart", - }, -}; - -static int __init bcm_uart_init(void) -{ - int ret; - - ret = uart_register_driver(&bcm_uart_driver); - if (ret) - return ret; - - ret = platform_driver_register(&bcm_uart_platform_driver); - if (ret) - uart_unregister_driver(&bcm_uart_driver); - - return ret; -} - -static void __exit bcm_uart_exit(void) -{ - platform_driver_unregister(&bcm_uart_platform_driver); - uart_unregister_driver(&bcm_uart_driver); -} - -module_init(bcm_uart_init); -module_exit(bcm_uart_exit); - -MODULE_AUTHOR("Maxime Bizon "); -MODULE_DESCRIPTION("Broadcom 63 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) -#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) -#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) -#include - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -/* UART name and device definitions */ -#define BFIN_SERIAL_DEV_NAME "ttyBF" -#define BFIN_SERIAL_MAJOR 204 -#define BFIN_SERIAL_MINOR 64 - -static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - -# ifndef CONFIG_SERIAL_BFIN_PIO -# error KGDB only support UART in PIO mode. -# endif - -static int kgdboc_port_line; -static int kgdboc_break_enabled; -#endif -/* - * Setup for console. Argument comes from the menuconfig - */ -#define DMA_RX_XCOUNT 512 -#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) - -#define DMA_RX_FLUSH_JIFFIES (HZ / 50) - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); -#else -static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -#endif - -static void bfin_serial_reset_irda(struct uart_port *port); - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (UART_GET_CTS(uart)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - UART_ENABLE_RTS(uart); - else - UART_DISABLE_RTS(uart); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned int status; - - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - uart->scts = 1; - UART_CLEAR_SCTS(uart); - UART_CLEAR_IER(uart, EDSSI); -#endif - - return IRQ_HANDLED; -} -#else -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} -#endif - -/* - * interrupts are disabled on entry - */ -static void bfin_serial_stop_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_SERIAL_BFIN_DMA - struct circ_buf *xmit = &uart->port.state->xmit; -#endif - - while (!(UART_GET_LSR(uart) & TEMT)) - cpu_relax(); - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - uart->tx_count = 0; - uart->tx_done = 1; -#else -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - UART_CLEAR_IER(uart, ETBEI); -#endif -} - -/* - * port is locked and interrupts are disabled - */ -static void bfin_serial_start_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - struct tty_struct *tty = uart->port.state->port.tty; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - /* - * To avoid losting RX interrupt, we reset IR function - * before sending data. - */ - if (tty->termios->c_line == N_IRDA) - bfin_serial_reset_irda(port); - -#ifdef CONFIG_SERIAL_BFIN_DMA - if (uart->tx_done) - bfin_serial_dma_tx_chars(uart); -#else - UART_SET_IER(uart, ETBEI); - bfin_serial_tx_chars(uart); -#endif -} - -/* - * Interrupts are enabled - */ -static void bfin_serial_stop_rx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - UART_CLEAR_IER(uart, ERBFI); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void bfin_serial_enable_ms(struct uart_port *port) -{ -} - - -#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) -# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) -# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) -#else -# define UART_GET_ANOMALY_THRESHOLD(uart) 0 -# define UART_SET_ANOMALY_THRESHOLD(uart, v) -#endif - -#ifdef CONFIG_SERIAL_BFIN_PIO -static void bfin_serial_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = NULL; - unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - ch = UART_GET_CHAR(uart); - uart->port.icount.rx++; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line - && kgdboc_break_enabled) - if (ch == 0x3) {/* Ctrl + C */ - kgdb_breakpoint(); - return; - } - - if (!uart->port.state || !uart->port.state->port.tty) - return; -#endif - tty = uart->port.state->port.tty; - - if (ANOMALY_05000363) { - /* The BF533 (and BF561) family of processors have a nice anomaly - * where they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. Due to the nature of the flood, it is - * not possible to reliably catch bytes that are sent too quickly - * after this break. So application code talking to the Blackfin - * which sends a break signal must allow at least 1.5 character - * times after the end of the break for things to stabilize. This - * timeout was picked as it must absolutely be larger than 1 - * character time +/- some percent. So 1.5 sounds good. All other - * Blackfin families operate properly. Woo. - */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; - - if ((~ch & (~ch + 1)) & 0xff) - goto known_good_char; - - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) - goto known_good_char; - - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) - goto known_good_char; - - if (ch) - anomaly_start.tv_sec = 0; - else - anomaly_start = curr; - - return; - - known_good_char: - status &= ~BI; - anomaly_start.tv_sec = 0; - } - } - - if (status & BI) { - if (ANOMALY_05000363) - if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - if (uart_handle_sysrq_char(&uart->port, ch)) - goto ignore_char; - - uart_insert_char(&uart->port, status, OE, ch, flg); - - ignore_char: - tty_flip_buffer_push(tty); -} - -static void bfin_serial_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { - UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); -} - -static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - - spin_lock(&uart->port.lock); - while (UART_GET_LSR(uart) & DR) - bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - spin_lock(&uart->port.lock); - if (UART_GET_LSR(uart) & THRE) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - uart->tx_done = 0; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - uart->tx_count = 0; - uart->tx_done = 1; - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) - uart->tx_count = UART_XMIT_SIZE - xmit->tail; - blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), - (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); - set_dma_config(uart->tx_dma_channel, - set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, - INTR_ON_BUF, - DIMENSION_LINEAR, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); - set_dma_x_count(uart->tx_dma_channel, uart->tx_count); - set_dma_x_modify(uart->tx_dma_channel, 1); - SSYNC(); - enable_dma(uart->tx_dma_channel); - - UART_SET_IER(uart, ETBEI); -} - -static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = uart->port.state->port.tty; - int i, flg, status; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - uart->port.icount.rx += - CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, - UART_XMIT_SIZE); - - if (status & BI) { - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto dma_ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - for (i = uart->rx_dma_buf.tail; ; i++) { - if (i >= UART_XMIT_SIZE) - i = 0; - if (i == uart->rx_dma_buf.head) - break; - if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - uart_insert_char(&uart->port, status, OE, - uart->rx_dma_buf.buf[i], flg); - } - - dma_ignore_char: - tty_flip_buffer_push(tty); -} - -void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) -{ - int x_pos, pos; - - dma_disable_irq(uart->tx_dma_channel); - dma_disable_irq(uart->rx_dma_channel); - spin_lock_bh(&uart->port.lock); - - /* 2D DMA RX buffer ring is used. Because curr_y_count and - * curr_x_count can't be read as an atomic operation, - * curr_y_count should be read before curr_x_count. When - * curr_x_count is read, curr_y_count may already indicate - * next buffer line. But, the position calculated here is - * still indicate the old line. The wrong position data may - * be smaller than current buffer tail, which cause garbages - * are received if it is not prohibit. - */ - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - x_pos = DMA_RX_XCOUNT - x_pos; - if (x_pos == DMA_RX_XCOUNT) - x_pos = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - /* Ignore receiving data if new position is in the same line of - * current buffer tail and small. - */ - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock_bh(&uart->port.lock); - dma_enable_irq(uart->tx_dma_channel); - dma_enable_irq(uart->rx_dma_channel); - - mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); -} - -static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - struct circ_buf *xmit = &uart->port.state->xmit; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - spin_lock(&uart->port.lock); - if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - disable_dma(uart->tx_dma_channel); - clear_dma_irqstat(uart->tx_dma_channel); - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - - bfin_serial_dma_tx_chars(uart); - } - - spin_unlock(&uart->port.lock); - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned short irqstat; - int x_pos, pos; - - spin_lock(&uart->port.lock); - irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); - clear_dma_irqstat(uart->rx_dma_channel); - - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int bfin_serial_tx_empty(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short lsr; - - lsr = UART_GET_LSR(uart); - if (lsr & TEMT) - return TIOCSER_TEMT; - else - return 0; -} - -static void bfin_serial_break_ctl(struct uart_port *port, int break_state) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - u16 lcr = UART_GET_LCR(uart); - if (break_state) - lcr |= SB; - else - lcr &= ~SB; - UART_PUT_LCR(uart, lcr); - SSYNC(); -} - -static int bfin_serial_startup(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - dma_addr_t dma_handle; - - if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); - return -EBUSY; - } - - if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); - free_dma(uart->rx_dma_channel); - return -EBUSY; - } - - set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); - set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); - - uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); - uart->rx_dma_buf.head = 0; - uart->rx_dma_buf.tail = 0; - uart->rx_dma_nrows = 0; - - set_dma_config(uart->rx_dma_channel, - set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, - INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); - set_dma_x_modify(uart->rx_dma_channel, 1); - set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); - set_dma_y_modify(uart->rx_dma_channel, 1); - set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); - enable_dma(uart->rx_dma_channel); - - uart->rx_dma_timer.data = (unsigned long)(uart); - uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; - uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; - add_timer(&(uart->rx_dma_timer)); -#else -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) - kgdboc_break_enabled = 0; - else { -# endif - if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, - "BFIN_UART_RX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); - return -EBUSY; - } - - if (request_irq - (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, - "BFIN_UART_TX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); - free_irq(uart->port.irq, uart); - return -EBUSY; - } - -# ifdef CONFIG_BF54x - { - /* - * UART2 and UART3 on BF548 share interrupt PINs and DMA - * controllers with SPORT2 and SPORT3. UART rx and tx - * interrupts are generated in PIO mode only when configure - * their peripheral mapping registers properly, which means - * request corresponding DMA channels in PIO mode as well. - */ - unsigned uart_dma_ch_rx, uart_dma_ch_tx; - - switch (uart->port.irq) { - case IRQ_UART3_RX: - uart_dma_ch_rx = CH_UART3_RX; - uart_dma_ch_tx = CH_UART3_TX; - break; - case IRQ_UART2_RX: - uart_dma_ch_rx = CH_UART2_RX; - uart_dma_ch_tx = CH_UART2_TX; - break; - default: - uart_dma_ch_rx = uart_dma_ch_tx = 0; - break; - }; - - if (uart_dma_ch_rx && - request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE"Fail to attach UART interrupt\n"); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - if (uart_dma_ch_tx && - request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Fail to attach UART interrupt\n"); - free_dma(uart_dma_ch_rx); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - } -# endif -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - } -# endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - if (request_irq(gpio_to_irq(uart->cts_pin), - bfin_serial_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - IRQF_DISABLED, "BFIN_UART_CTS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); - } - } - if (uart->rts_pin >= 0) { - gpio_direction_output(uart->rts_pin, 0); - } -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0 && request_irq(uart->status_irq, - bfin_serial_mctrl_cts_int, - IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); - } - - /* CTS RTS PINs are negative assertive. */ - UART_PUT_MCR(uart, ACTS); - UART_SET_IER(uart, EDSSI); -#endif - - UART_SET_IER(uart, ERBFI); - return 0; -} - -static void bfin_serial_shutdown(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - free_dma(uart->tx_dma_channel); - disable_dma(uart->rx_dma_channel); - free_dma(uart->rx_dma_channel); - del_timer(&(uart->rx_dma_timer)); - dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); -#else -#ifdef CONFIG_BF54x - switch (uart->port.irq) { - case IRQ_UART3_RX: - free_dma(CH_UART3_RX); - free_dma(CH_UART3_TX); - break; - case IRQ_UART2_RX: - free_dma(CH_UART2_RX); - free_dma(CH_UART2_TX); - break; - default: - break; - }; -#endif - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq+1, uart); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) - free_irq(gpio_to_irq(uart->cts_pin), uart); -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - free_irq(uart->status_irq, uart); -#endif -} - -static void -bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned long flags; - unsigned int baud, quot; - unsigned short val, ier, lcr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS8: - lcr = WLS(8); - break; - case CS7: - lcr = WLS(7); - break; - case CS6: - lcr = WLS(6); - break; - case CS5: - lcr = WLS(5); - break; - default: - printk(KERN_ERR "%s: word lengh not supported\n", - __func__); - } - - /* Anomaly notes: - * 05000231 - STOP bit is always set to 1 whatever the user is set. - */ - if (termios->c_cflag & CSTOPB) { - if (ANOMALY_05000231) - printk(KERN_WARNING "STOP bits other than 1 is not " - "supported in case of anomaly 05000231.\n"); - else - lcr |= STB; - } - if (termios->c_cflag & PARENB) - lcr |= PEN; - if (!(termios->c_cflag & PARODD)) - lcr |= EPS; - if (termios->c_cflag & CMSPAR) - lcr |= STP; - - spin_lock_irqsave(&uart->port.lock, flags); - - port->read_status_mask = OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (FE | PE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= FE | PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= OE; - } - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - /* If discipline is not IRDA, apply ANOMALY_05000230 */ - if (termios->c_line != N_IRDA) - quot -= ANOMALY_05000230; - - UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); - - /* Disable UART */ - ier = UART_GET_IER(uart); - UART_DISABLE_INTS(uart); - - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - UART_PUT_DLL(uart, quot & 0xFF); - UART_PUT_DLH(uart, (quot >> 8) & 0xFF); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - UART_PUT_LCR(uart, lcr); - - /* Enable UART */ - UART_ENABLE_INTS(uart, ier); - - val = UART_GET_GCTL(uart); - val |= UCEN; - UART_PUT_GCTL(uart, val); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - -static const char *bfin_serial_type(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void bfin_serial_release_port(struct uart_port *port) -{ -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int bfin_serial_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void bfin_serial_config_port(struct uart_port *port, int flags) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - if (flags & UART_CONFIG_TYPE && - bfin_serial_request_port(&uart->port) == 0) - uart->port.type = PORT_BFIN; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_BFIN and PORT_UNKNOWN - */ -static int -bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return 0; -} - -/* - * Enable the IrDA function if tty->ldisc.num is N_IRDA. - * In other cases, disable IrDA function. - */ -static void bfin_serial_set_ldisc(struct uart_port *port, int ld) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - switch (ld) { - case N_IRDA: - val = UART_GET_GCTL(uart); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - break; - default: - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - } -} - -static void bfin_serial_reset_irda(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); -} - -#ifdef CONFIG_CONSOLE_POLL -/* Anomaly notes: - * 05000099 - Because we only use THRE in poll_put and DR in poll_get, - * losing other bits of UART_LSR is not a problem here. - */ -static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - while (!(UART_GET_LSR(uart) & THRE)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); -} - -static int bfin_serial_poll_get_char(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned char chr; - - while (!(UART_GET_LSR(uart) & DR)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - - return chr; -} -#endif - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) -static void bfin_kgdboc_port_shutdown(struct uart_port *port) -{ - if (kgdboc_break_enabled) { - kgdboc_break_enabled = 0; - bfin_serial_shutdown(port); - } -} - -static int bfin_kgdboc_port_startup(struct uart_port *port) -{ - kgdboc_port_line = port->line; - kgdboc_break_enabled = !bfin_serial_startup(port); - return 0; -} -#endif - -static struct uart_ops bfin_serial_pops = { - .tx_empty = bfin_serial_tx_empty, - .set_mctrl = bfin_serial_set_mctrl, - .get_mctrl = bfin_serial_get_mctrl, - .stop_tx = bfin_serial_stop_tx, - .start_tx = bfin_serial_start_tx, - .stop_rx = bfin_serial_stop_rx, - .enable_ms = bfin_serial_enable_ms, - .break_ctl = bfin_serial_break_ctl, - .startup = bfin_serial_startup, - .shutdown = bfin_serial_shutdown, - .set_termios = bfin_serial_set_termios, - .set_ldisc = bfin_serial_set_ldisc, - .type = bfin_serial_type, - .release_port = bfin_serial_release_port, - .request_port = bfin_serial_request_port, - .config_port = bfin_serial_config_port, - .verify_port = bfin_serial_verify_port, -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - .kgdboc_port_startup = bfin_kgdboc_port_startup, - .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, -#endif -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = bfin_serial_poll_put_char, - .poll_get_char = bfin_serial_poll_get_char, -#endif -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, - int *parity, int *bits) -{ - unsigned short status; - - status = UART_GET_IER(uart) & (ERBFI | ETBEI); - if (status == (ERBFI | ETBEI)) { - /* ok, the port was enabled */ - u16 lcr, dlh, dll; - - lcr = UART_GET_LCR(uart); - - *parity = 'n'; - if (lcr & PEN) { - if (lcr & EPS) - *parity = 'e'; - else - *parity = 'o'; - } - switch (lcr & 0x03) { - case 0: *bits = 5; break; - case 1: *bits = 6; break; - case 2: *bits = 7; break; - case 3: *bits = 8; break; - } - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - dll = UART_GET_DLL(uart); - dlh = UART_GET_DLH(uart); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - *baud = get_sclk() / (16*(dll | dlh << 8)); - } - pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); -} - -static struct uart_driver bfin_serial_reg; - -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); -} - -#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || - defined (CONFIG_EARLY_PRINTK) */ - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE -#define CLASS_BFIN_CONSOLE "bfin-console" -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = bfin_serial_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - -static int __init -bfin_serial_console_setup(struct console *co, char *options) -{ - struct bfin_serial_port *uart; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) - return -ENODEV; - - uart = bfin_serial_ports[co->index]; - if (!uart) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - bfin_serial_console_get_options(uart, &baud, &parity, &bits); - - return uart_set_options(&uart->port, co, baud, parity, bits, flow); -} - -static struct console bfin_serial_console = { - .name = BFIN_SERIAL_DEV_NAME, - .write = bfin_serial_console_write, - .device = uart_console_device, - .setup = bfin_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#define BFIN_SERIAL_CONSOLE &bfin_serial_console -#else -#define BFIN_SERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ - -#ifdef CONFIG_EARLY_PRINTK -static struct bfin_serial_port bfin_earlyprintk_port; -#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" - -/* - * Interrupts are disabled on entering - */ -static void -bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) -{ - unsigned long flags; - - if (bfin_earlyprintk_port.port.line != co->index) - return; - - spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); - uart_console_write(&bfin_earlyprintk_port.port, s, count, - bfin_serial_console_putchar); - spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); -} - -/* - * This should have a .setup or .early_setup in it, but then things get called - * without the command line options, and the baud rate gets messed up - so - * don't let the common infrastructure play with things. (see calls to setup - * & earlysetup in ./kernel/printk.c:register_console() - */ -static struct __initdata console bfin_early_serial_console = { - .name = "early_BFuart", - .write = bfin_earlyprintk_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#endif - -static struct uart_driver bfin_serial_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = BFIN_SERIAL_DEV_NAME, - .major = BFIN_SERIAL_MAJOR, - .minor = BFIN_SERIAL_MINOR, - .nr = BFIN_UART_NR_PORTS, - .cons = BFIN_SERIAL_CONSOLE, -}; - -static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_suspend_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_resume(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_resume_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_probe(struct platform_device *pdev) -{ - struct resource *res; - struct bfin_serial_port *uart = NULL; - int ret = 0; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_serial_ports[pdev->id] == NULL) { - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - dev_err(&pdev->dev, - "fail to malloc bfin_serial_port\n"); - return -ENOMEM; - } - bfin_serial_ports[pdev->id] = uart; - -#ifdef CONFIG_EARLY_PRINTK - if (!(bfin_earlyprintk_port.port.membase - && bfin_earlyprintk_port.port.line == pdev->id)) { - /* - * If the peripheral PINs of current port is allocated - * in earlyprintk probe stage, don't do it again. - */ -#endif - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - goto out_error_free_mem; - } -#ifdef CONFIG_EARLY_PRINTK - } -#endif - - spin_lock_init(&uart->port.lock); - uart->port.uartclk = get_sclk(); - uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; - uart->port.ops = &bfin_serial_pops; - uart->port.line = pdev->id; - uart->port.iotype = UPIO_MEM; - uart->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - uart->port.membase = ioremap(res->start, - res->end - res->start); - if (!uart->port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - uart->port.mapbase = res->start; - - uart->port.irq = platform_get_irq(pdev, 0); - if (uart->port.irq < 0) { - dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - uart->status_irq = platform_get_irq(pdev, 1); - if (uart->status_irq < 0) { - dev_err(&pdev->dev, "No uart status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - -#ifdef CONFIG_SERIAL_BFIN_DMA - uart->tx_done = 1; - uart->tx_count = 0; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->tx_dma_channel = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->rx_dma_channel = res->start; - - init_timer(&(uart->rx_dma_timer)); -#endif - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - uart->cts_pin = -1; - else - uart->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - uart->rts_pin = -1; - else - uart->rts_pin = res->start; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) - if (uart->rts_pin >= 0) - gpio_request(uart->rts_pin, DRIVER_NAME); -# endif -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - uart = bfin_serial_ports[pdev->id]; - uart->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, uart); - ret = uart_add_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - } -#endif - - if (!ret) - return 0; - - if (uart) { -out_error_unmap: - iounmap(uart->port.membase); -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); -out_error_free_mem: - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return ret; -} - -static int __devexit bfin_serial_remove(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - dev_set_drvdata(&pdev->dev, NULL); - - if (uart) { - uart_remove_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); -#endif - iounmap(uart->port.membase); - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver bfin_serial_driver = { - .probe = bfin_serial_probe, - .remove = __devexit_p(bfin_serial_remove), - .suspend = bfin_serial_suspend, - .resume = bfin_serial_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) -static __initdata struct early_platform_driver early_bfin_serial_driver = { - .class_str = CLASS_BFIN_CONSOLE, - .pdrv = &bfin_serial_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init bfin_serial_rs_console_init(void) -{ - early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); - - early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); - - register_console(&bfin_serial_console); - - return 0; -} -console_initcall(bfin_serial_rs_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -/* - * Memory can't be allocated dynamically during earlyprink init stage. - * So, do individual probe for earlyprink with a static uart port variable. - */ -static int bfin_earlyprintk_probe(struct platform_device *pdev) -{ - struct resource *res; - int ret; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); - return -ENOENT; - } - - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - return ret; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - bfin_earlyprintk_port.port.membase = ioremap(res->start, - res->end - res->start); - if (!bfin_earlyprintk_port.port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - bfin_earlyprintk_port.port.mapbase = res->start; - bfin_earlyprintk_port.port.line = pdev->id; - bfin_earlyprintk_port.port.uartclk = get_sclk(); - bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; - spin_lock_init(&bfin_earlyprintk_port.port.lock); - - return 0; - -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - - return ret; -} - -static struct platform_driver bfin_earlyprintk_driver = { - .probe = bfin_earlyprintk_probe, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { - .class_str = CLASS_BFIN_EARLYPRINTK, - .pdrv = &bfin_earlyprintk_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -struct console __init *bfin_earlyserial_init(unsigned int port, - unsigned int cflag) -{ - struct ktermios t; - char port_name[20]; - - if (port < 0 || port >= BFIN_UART_NR_PORTS) - return NULL; - - /* - * Only probe resource of the given port in earlyprintk boot arg. - * The expected port id should be indicated in port name string. - */ - snprintf(port_name, 20, DRIVER_NAME ".%d", port); - early_platform_driver_register(&early_bfin_earlyprintk_driver, - port_name); - early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); - - if (!bfin_earlyprintk_port.port.membase) - return NULL; - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - /* - * If we are using early serial, don't let the normal console rewind - * log buffer, since that causes things to be printed multiple times - */ - bfin_serial_console.flags &= ~CON_PRINTBUFFER; -#endif - - bfin_early_serial_console.index = port; - t.c_cflag = cflag; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = port; - bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); - - return &bfin_early_serial_console; -} -#endif /* CONFIG_EARLY_PRINTK */ - -static int __init bfin_serial_init(void) -{ - int ret; - - pr_info("Blackfin serial driver\n"); - - ret = uart_register_driver(&bfin_serial_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - bfin_serial_reg.driver_name, ret); - } - - ret = platform_driver_register(&bfin_serial_driver); - if (ret) { - pr_err("fail to register bfin uart\n"); - uart_unregister_driver(&bfin_serial_reg); - } - - return ret; -} - -static void __exit bfin_serial_exit(void) -{ - platform_driver_unregister(&bfin_serial_driver); - uart_unregister_driver(&bfin_serial_reg); -} - - -module_init(bfin_serial_init); -module_exit(bfin_serial_exit); - -MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); -MODULE_DESCRIPTION("Blackfin generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); -MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c deleted file mode 100644 index e95c524..0000000 --- a/drivers/serial/bfin_sport_uart.c +++ /dev/null @@ -1,935 +0,0 @@ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -/* #define DEBUG */ - -#define DRV_NAME "bfin-sport-uart" -#define DEVICE_NAME "ttySS" -#define pr_fmt(fmt) DRV_NAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "bfin_sport_uart.h" - -struct sport_uart_port { - struct uart_port port; - int err_irq; - unsigned short csize; - unsigned short rxmask; - unsigned short txmask1; - unsigned short txmask2; - unsigned char stopb; -/* unsigned char parib; */ -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int cts_pin; - int rts_pin; -#endif -}; - -static int sport_uart_tx_chars(struct sport_uart_port *up); -static void sport_stop_tx(struct uart_port *port); - -static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) -{ - pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, - up->txmask1, up->txmask2); - - /* Place Start and Stop bits */ - __asm__ __volatile__ ( - "%[val] <<= 1;" - "%[val] = %[val] & %[mask1];" - "%[val] = %[val] | %[mask2];" - : [val]"+d"(value) - : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) - : "ASTAT" - ); - pr_debug("%s value:%x\n", __func__, value); - - SPORT_PUT_TX(up, value); -} - -static inline unsigned char rx_one_byte(struct sport_uart_port *up) -{ - unsigned int value; - unsigned char extract; - u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - - if ((up->csize + up->stopb) > 7) - value = SPORT_GET_RX32(up); - else - value = SPORT_GET_RX(up); - - pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, - up->csize, up->rxmask); - - /* Extract data */ - __asm__ __volatile__ ( - "%[extr] = 0;" - "%[mask1] = %[rxmask];" - "%[mask2] = 0x0200(Z);" - "%[shift] = 0;" - "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" - ".Lloop_s:" - "%[tmp] = extract(%[val], %[mask1].L)(Z);" - "%[tmp] <<= %[shift];" - "%[extr] = %[extr] | %[tmp];" - "%[mask1] = %[mask1] - %[mask2];" - ".Lloop_e:" - "%[shift] += 1;" - : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), - [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) - : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) - : "ASTAT", "LB0", "LC0", "LT0" - ); - - pr_debug(" extract:%x\n", extract); - return extract; -} - -static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) -{ - int tclkdiv, rclkdiv; - unsigned int sclk = get_sclk(); - - /* Set TCR1 and TCR2, TFSR is not enabled for uart */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, size + 1); - pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); - - /* Set RCR1 and RCR2 */ - SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); - pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - - tclkdiv = sclk / (2 * baud_rate) - 1; - /* The actual uart baud rate of devices vary between +/-2%. The sport - * RX sample rate should be faster than the double of the worst case, - * otherwise, wrong data are received. So, set sport RX clock to be - * 3% faster. - */ - rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1; - SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_RCLKDIV(up, rclkdiv); - SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, rclkdiv); - - return 0; -} - -static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch; - - spin_lock(&up->port.lock); - - while (SPORT_GET_STAT(up) & RXNE) { - ch = rx_one_byte(up); - up->port.icount.rx++; - - if (!uart_handle_sysrq_char(&up->port, ch)) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - tty_flip_buffer_push(tty); - - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - - spin_lock(&up->port.lock); - sport_uart_tx_chars(up); - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - unsigned int stat = SPORT_GET_STAT(up); - - spin_lock(&up->port.lock); - - /* Overflow in RX FIFO */ - if (stat & ROVF) { - up->port.icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ - } - /* These should not happen */ - if (stat & (TOVF | TUVF | RUVF)) { - pr_err("SPORT Error:%s %s %s\n", - (stat & TOVF) ? "TX overflow" : "", - (stat & TUVF) ? "TX underflow" : "", - (stat & RUVF) ? "RX underflow" : ""); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - } - SSYNC(); - - spin_unlock(&up->port.lock); - return IRQ_HANDLED; -} - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (SPORT_UART_GET_CTS(up)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - SPORT_UART_ENABLE_RTS(up); - else - SPORT_UART_DISABLE_RTS(up); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id) -{ - struct sport_uart_port *up = (struct sport_uart_port *)dev_id; - unsigned int status; - - status = sport_get_mctrl(&up->port); - uart_handle_cts_change(&up->port, status & TIOCM_CTS); - - return IRQ_HANDLED; -} -#else -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return TIOCM_CTS | TIOCM_CD | TIOCM_DSR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - pr_debug("%s enter\n", __func__); -} -#endif - -/* Reqeust IRQ, Setup clock */ -static int sport_startup(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - int ret; - - pr_debug("%s enter\n", __func__); - ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, - "SPORT_UART_RX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT RX interrupt\n"); - return ret; - } - - ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, - "SPORT_UART_TX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT TX interrupt\n"); - goto fail1; - } - - ret = request_irq(up->err_irq, sport_uart_err_irq, 0, - "SPORT_UART_STATUS", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT status interrupt\n"); - goto fail2; - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) { - if (request_irq(gpio_to_irq(up->cts_pin), - sport_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { - up->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART \ - over SPORT CTS interrupt. So, disable it.\n"); - } - } - if (up->rts_pin >= 0) - gpio_direction_output(up->rts_pin, 0); -#endif - - return 0; - fail2: - free_irq(up->port.irq+1, up); - fail1: - free_irq(up->port.irq, up); - - return ret; -} - -/* - * sport_uart_tx_chars - * - * ret 1 means need to enable sport. - * ret 0 means do nothing. - */ -static int sport_uart_tx_chars(struct sport_uart_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - - if (SPORT_GET_STAT(up) & TXF) - return 0; - - if (up->port.x_char) { - tx_one_byte(up, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - /* The waiting loop to stop SPORT TX from TX interrupt is - * too long. This may block SPORT RX interrupts and cause - * RX FIFO overflow. So, do stop sport TX only after the last - * char in TX FIFO is moved into the shift register. - */ - if (SPORT_GET_STAT(up) & TXHRE) - sport_stop_tx(&up->port); - return 0; - } - - while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) { - tx_one_byte(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); - up->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return 1; -} - -static unsigned int sport_tx_empty(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; - - stat = SPORT_GET_STAT(up); - pr_debug("%s stat:%04x\n", __func__, stat); - if (stat & TXHRE) { - return TIOCSER_TEMT; - } else - return 0; -} - -static void sport_stop_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - if (!(SPORT_GET_TCR1(up) & TSPEN)) - return; - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - - return; -} - -static void sport_start_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - /* Write data into SPORT FIFO before enable SPROT to transmit */ - if (sport_uart_tx_chars(up)) { - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - } - - pr_debug("%s exit\n", __func__); -} - -static void sport_stop_rx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - /* Disable sport to stop rx */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); -} - -static void sport_enable_ms(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); -} - -static void sport_break_ctl(struct uart_port *port, int break_state) -{ - pr_debug("%s enter\n", __func__); -} - -static void sport_shutdown(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - dev_dbg(port->dev, "%s enter\n", __func__); - - /* Disable sport */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); - - free_irq(up->port.irq, up); - free_irq(up->port.irq+1, up); - free_irq(up->err_irq, up); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) - free_irq(gpio_to_irq(up->cts_pin), up); -#endif -} - -static const char *sport_type(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; -} - -static void sport_release_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); -} - -static int sport_request_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_config_port(struct uart_port *port, int flags) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - up->port.type = PORT_BFIN_SPORT; -} - -static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned long flags; - int i; - - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - - switch (termios->c_cflag & CSIZE) { - case CS8: - up->csize = 8; - break; - case CS7: - up->csize = 7; - break; - case CS6: - up->csize = 6; - break; - case CS5: - up->csize = 5; - break; - default: - pr_warning("requested word length not supported\n"); - } - - if (termios->c_cflag & CSTOPB) { - up->stopb = 1; - } - if (termios->c_cflag & PARENB) { - pr_warning("PAREN bits is not supported yet\n"); - /* up->parib = 1; */ - } - - spin_lock_irqsave(&up->port.lock, flags); - - port->read_status_mask = 0; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - - /* RX extract mask */ - up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); - /* TX masks, 8 bit data and 1 bit stop for example: - * mask1 = b#0111111110 - * mask2 = b#1000000000 - */ - for (i = 0, up->txmask1 = 0; i < up->csize; i++) - up->txmask1 |= (1<txmask2 = (1<stopb) { - ++i; - up->txmask2 |= (1<txmask1 <<= 1; - up->txmask2 <<= 1; - /* uart baud rate */ - port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); - - /* Disable UART */ - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - - sport_uart_setup(up, up->csize + up->stopb, port->uartclk); - - /* driver TX line high after config, one dummy data is - * necessary to stop sport after shift one byte - */ - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SSYNC(); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, port->uartclk); - - /* Enable sport rx */ - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); - SSYNC(); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -struct uart_ops sport_uart_ops = { - .tx_empty = sport_tx_empty, - .set_mctrl = sport_set_mctrl, - .get_mctrl = sport_get_mctrl, - .stop_tx = sport_stop_tx, - .start_tx = sport_start_tx, - .stop_rx = sport_stop_rx, - .enable_ms = sport_enable_ms, - .break_ctl = sport_break_ctl, - .startup = sport_startup, - .shutdown = sport_shutdown, - .set_termios = sport_set_termios, - .type = sport_type, - .release_port = sport_release_port, - .request_port = sport_request_port, - .config_port = sport_config_port, - .verify_port = sport_verify_port, -}; - -#define BFIN_SPORT_UART_MAX_PORTS 4 - -static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console" - -static int __init -sport_uart_console_setup(struct console *co, char *options) -{ - struct sport_uart_port *up; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* Check whether an invalid uart number has been specified */ - if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) - return -ENODEV; - - up = bfin_sport_uart_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static void sport_uart_console_putchar(struct uart_port *port, int ch) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - while (SPORT_GET_STAT(up) & TXF) - barrier(); - - tx_one_byte(up, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void -sport_uart_console_write(struct console *co, const char *s, unsigned int count) -{ - struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - if (SPORT_GET_TCR1(up) & TSPEN) - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - else { - /* dummy data to start sport */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - barrier(); - - /* Stop sport tx transfer */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - } - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver sport_uart_reg; - -static struct console sport_uart_console = { - .name = DEVICE_NAME, - .write = sport_uart_console_write, - .device = uart_console_device, - .setup = sport_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sport_uart_reg, -}; - -#define SPORT_UART_CONSOLE (&sport_uart_console) -#else -#define SPORT_UART_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ - - -static struct uart_driver sport_uart_reg = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = DEVICE_NAME, - .major = 204, - .minor = 84, - .nr = BFIN_SPORT_UART_MAX_PORTS, - .cons = SPORT_UART_CONSOLE, -}; - -#ifdef CONFIG_PM -static int sport_uart_suspend(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_suspend_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static int sport_uart_resume(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_resume_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, -}; -#endif - -static int __devinit sport_uart_probe(struct platform_device *pdev) -{ - struct resource *res; - struct sport_uart_port *sport; - int ret = 0; - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - - if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { - dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_sport_uart_ports[pdev->id] == NULL) { - bfin_sport_uart_ports[pdev->id] = - kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL); - sport = bfin_sport_uart_ports[pdev->id]; - if (!sport) { - dev_err(&pdev->dev, - "Fail to malloc sport_uart_port\n"); - return -ENOMEM; - } - - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRV_NAME); - if (ret) { - dev_err(&pdev->dev, - "Fail to request SPORT peripherals\n"); - goto out_error_free_mem; - } - - spin_lock_init(&sport->port.lock); - sport->port.fifosize = SPORT_TX_FIFO_SIZE, - sport->port.ops = &sport_uart_ops; - sport->port.line = pdev->id; - sport->port.iotype = UPIO_MEM; - sport->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - sport->port.membase = ioremap(res->start, resource_size(res)); - if (!sport->port.membase) { - dev_err(&pdev->dev, "Cannot map sport IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - sport->port.mapbase = res->start; - - sport->port.irq = platform_get_irq(pdev, 0); - if (sport->port.irq < 0) { - dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - sport->err_irq = platform_get_irq(pdev, 1); - if (sport->err_irq < 0) { - dev_err(&pdev->dev, "No sport status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - sport->cts_pin = -1; - else - sport->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - sport->rts_pin = -1; - else - sport->rts_pin = res->start; - - if (sport->rts_pin >= 0) - gpio_request(sport->rts_pin, DRV_NAME); -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - sport = bfin_sport_uart_ports[pdev->id]; - sport->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, sport); - ret = uart_add_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - } -#endif - if (!ret) - return 0; - - if (sport) { -out_error_unmap: - iounmap(sport->port.membase); -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); -out_error_free_mem: - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return ret; -} - -static int __devexit sport_uart_remove(struct platform_device *pdev) -{ - struct sport_uart_port *sport = platform_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - dev_set_drvdata(&pdev->dev, NULL); - - if (sport) { - uart_remove_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (sport->rts_pin >= 0) - gpio_free(sport->rts_pin); -#endif - iounmap(sport->port.membase); - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver sport_uart_driver = { - .probe = sport_uart_probe, - .remove = __devexit_p(sport_uart_remove), - .driver = { - .name = DRV_NAME, -#ifdef CONFIG_PM - .pm = &bfin_sport_uart_dev_pm_ops, -#endif - }, -}; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -static __initdata struct early_platform_driver early_sport_uart_driver = { - .class_str = CLASS_BFIN_SPORT_CONSOLE, - .pdrv = &sport_uart_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init sport_uart_rs_console_init(void) -{ - early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); - - early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE, - BFIN_SPORT_UART_MAX_PORTS, 0); - - register_console(&sport_uart_console); - - return 0; -} -console_initcall(sport_uart_rs_console_init); -#endif - -static int __init sport_uart_init(void) -{ - int ret; - - pr_info("Blackfin uart over sport driver\n"); - - ret = uart_register_driver(&sport_uart_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - sport_uart_reg.driver_name, ret); - return ret; - } - - ret = platform_driver_register(&sport_uart_driver); - if (ret) { - pr_err("failed to register sport uart driver:%d\n", ret); - uart_unregister_driver(&sport_uart_reg); - } - - return ret; -} -module_init(sport_uart_init); - -static void __exit sport_uart_exit(void) -{ - platform_driver_unregister(&sport_uart_driver); - uart_unregister_driver(&sport_uart_reg); -} -module_exit(sport_uart_exit); - -MODULE_AUTHOR("Sonic Zhang, Roy Huang"); -MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h deleted file mode 100644 index 6d06ce1..0000000 --- a/drivers/serial/bfin_sport_uart.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -#ifndef _BFIN_SPORT_UART_H -#define _BFIN_SPORT_UART_H - -#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ -#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ -#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ -#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ -#define OFFSET_TX 0x10 /* Transmit Data Register */ -#define OFFSET_RX 0x18 /* Receive Data Register */ -#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ -#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ -#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ -#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ -#define OFFSET_STAT 0x30 /* Status Register */ - -#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) -#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) -#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) -#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) -#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) -#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) -/* - * If another interrupt fires while doing a 32-bit read from RX FIFO, - * a fake RX underflow error will be generated. So disable interrupts - * to prevent interruption while reading the FIFO. - */ -#define SPORT_GET_RX32(sport) \ -({ \ - unsigned int __ret; \ - if (ANOMALY_05000473) \ - local_irq_disable(); \ - __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ - if (ANOMALY_05000473) \ - local_irq_enable(); \ - __ret; \ -}) -#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) -#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) -#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) -#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) -#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) - -#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) -#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) -#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) -#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) -#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) -#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) -#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) -#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) -#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) -#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) -#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) - -#define SPORT_TX_FIFO_SIZE 8 - -#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) -#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) - -#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) -# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS -#endif - -#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c deleted file mode 100644 index b6acd19..0000000 --- a/drivers/serial/clps711x.c +++ /dev/null @@ -1,579 +0,0 @@ -/* - * linux/drivers/char/clps711x.c - * - * Driver for CLPS711x serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define UART_NR 2 - -#define SERIAL_CLPS711X_MAJOR 204 -#define SERIAL_CLPS711X_MINOR 40 -#define SERIAL_CLPS711X_NR UART_NR - -/* - * We use the relevant SYSCON register as a base address for these ports. - */ -#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) -#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) -#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) -#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) - -#define TX_IRQ(port) ((port)->irq) -#define RX_IRQ(port) ((port)->irq + 1) - -#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) - -#define tx_enabled(port) ((port)->unused[0]) - -static void clps711xuart_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - disable_irq(TX_IRQ(port)); - tx_enabled(port) = 0; - } -} - -static void clps711xuart_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(TX_IRQ(port)); - tx_enabled(port) = 1; - } -} - -static void clps711xuart_stop_rx(struct uart_port *port) -{ - disable_irq(RX_IRQ(port)); -} - -static void clps711xuart_enable_ms(struct uart_port *port) -{ -} - -static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, flg; - - status = clps_readl(SYSFLG(port)); - while (!(status & SYSFLG_URXFE)) { - ch = clps_readl(UARTDR(port)); - - port->icount.rx++; - - flg = TTY_NORMAL; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_ANY_ERR)) { - if (ch & UARTDR_PARERR) - port->icount.parity++; - else if (ch & UARTDR_FRMERR) - port->icount.frame++; - if (ch & UARTDR_OVERR) - port->icount.overrun++; - - ch &= port->read_status_mask; - - if (ch & UARTDR_PARERR) - flg = TTY_PARITY; - else if (ch & UARTDR_FRMERR) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); - - ignore_char: - status = clps_readl(SYSFLG(port)); - } - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - -static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - int count; - - if (port->x_char) { - clps_writel(port->x_char, UARTDR(port)); - port->icount.tx++; - port->x_char = 0; - return IRQ_HANDLED; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - clps711xuart_stop_tx(port); - return IRQ_HANDLED; - } - - count = port->fifosize >> 1; - do { - clps_writel(xmit->buf[xmit->tail], UARTDR(port)); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - clps711xuart_stop_tx(port); - - return IRQ_HANDLED; -} - -static unsigned int clps711xuart_tx_empty(struct uart_port *port) -{ - unsigned int status = clps_readl(SYSFLG(port)); - return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; -} - -static unsigned int clps711xuart_get_mctrl(struct uart_port *port) -{ - unsigned int port_addr; - unsigned int result = 0; - unsigned int status; - - port_addr = SYSFLG(port); - if (port_addr == SYSFLG1) { - status = clps_readl(SYSFLG1); - if (status & SYSFLG1_DCD) - result |= TIOCM_CAR; - if (status & SYSFLG1_DSR) - result |= TIOCM_DSR; - if (status & SYSFLG1_CTS) - result |= TIOCM_CTS; - } - - return result; -} - -static void -clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) -{ -} - -static void clps711xuart_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int ubrlcr; - - spin_lock_irqsave(&port->lock, flags); - ubrlcr = clps_readl(UBRLCR(port)); - if (break_state == -1) - ubrlcr |= UBRLCR_BREAK; - else - ubrlcr &= ~UBRLCR_BREAK; - clps_writel(ubrlcr, UBRLCR(port)); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int clps711xuart_startup(struct uart_port *port) -{ - unsigned int syscon; - int retval; - - tx_enabled(port) = 1; - - /* - * Allocate the IRQs - */ - retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, - "clps711xuart_tx", port); - if (retval) - return retval; - - retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, - "clps711xuart_rx", port); - if (retval) { - free_irq(TX_IRQ(port), port); - return retval; - } - - /* - * enable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon |= SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); - - return 0; -} - -static void clps711xuart_shutdown(struct uart_port *port) -{ - unsigned int ubrlcr, syscon; - - /* - * Free the interrupt - */ - free_irq(TX_IRQ(port), port); /* TX interrupt */ - free_irq(RX_IRQ(port), port); /* RX interrupt */ - - /* - * disable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon &= ~SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); - - /* - * disable break condition and fifos - */ - ubrlcr = clps_readl(UBRLCR(port)); - ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); - clps_writel(ubrlcr, UBRLCR(port)); -} - -static void -clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int ubrlcr, baud, quot; - unsigned long flags; - - /* - * We don't implement CREAD. - */ - termios->c_cflag |= CREAD; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - ubrlcr = UBRLCR_WRDLEN5; - break; - case CS6: - ubrlcr = UBRLCR_WRDLEN6; - break; - case CS7: - ubrlcr = UBRLCR_WRDLEN7; - break; - default: // CS8 - ubrlcr = UBRLCR_WRDLEN8; - break; - } - if (termios->c_cflag & CSTOPB) - ubrlcr |= UBRLCR_XSTOP; - if (termios->c_cflag & PARENB) { - ubrlcr |= UBRLCR_PRTEN; - if (!(termios->c_cflag & PARODD)) - ubrlcr |= UBRLCR_EVENPRT; - } - if (port->fifosize > 1) - ubrlcr |= UBRLCR_FIFOEN; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UARTDR_OVERR; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; - if (termios->c_iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_OVERR; - } - - quot -= 1; - - clps_writel(ubrlcr | quot, UBRLCR(port)); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *clps711xuart_type(struct uart_port *port) -{ - return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; -} - -/* - * Configure/autoconfigure the port. - */ -static void clps711xuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_CLPS711X; -} - -static void clps711xuart_release_port(struct uart_port *port) -{ -} - -static int clps711xuart_request_port(struct uart_port *port) -{ - return 0; -} - -static struct uart_ops clps711x_pops = { - .tx_empty = clps711xuart_tx_empty, - .set_mctrl = clps711xuart_set_mctrl_null, - .get_mctrl = clps711xuart_get_mctrl, - .stop_tx = clps711xuart_stop_tx, - .start_tx = clps711xuart_start_tx, - .stop_rx = clps711xuart_stop_rx, - .enable_ms = clps711xuart_enable_ms, - .break_ctl = clps711xuart_break_ctl, - .startup = clps711xuart_startup, - .shutdown = clps711xuart_shutdown, - .set_termios = clps711xuart_set_termios, - .type = clps711xuart_type, - .config_port = clps711xuart_config_port, - .release_port = clps711xuart_release_port, - .request_port = clps711xuart_request_port, -}; - -static struct uart_port clps711x_ports[UART_NR] = { - { - .iobase = SYSCON1, - .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 0, - .flags = UPF_BOOT_AUTOCONF, - }, - { - .iobase = SYSCON2, - .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 1, - .flags = UPF_BOOT_AUTOCONF, - } -}; - -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE -static void clps711xuart_console_putchar(struct uart_port *port, int ch) -{ - while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) - barrier(); - clps_writel(ch, UARTDR(port)); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - * - * Note that this is called with interrupts already disabled - */ -static void -clps711xuart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = clps711x_ports + co->index; - unsigned int status, syscon; - - /* - * Ensure that the port is enabled. - */ - syscon = clps_readl(SYSCON(port)); - clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); - - uart_console_write(port, s, count, clps711xuart_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the uart state. - */ - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UBUSY); - - clps_writel(syscon, SYSCON(port)); -} - -static void __init -clps711xuart_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { - unsigned int ubrlcr, quot; - - ubrlcr = clps_readl(UBRLCR(port)); - - *parity = 'n'; - if (ubrlcr & UBRLCR_PRTEN) { - if (ubrlcr & UBRLCR_EVENPRT) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) - *bits = 7; - else - *bits = 8; - - quot = ubrlcr & UBRLCR_BAUD_MASK; - *baud = port->uartclk / (16 * (quot + 1)); - } -} - -static int __init clps711xuart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(clps711x_ports, UART_NR, co); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - clps711xuart_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver clps711x_reg; -static struct console clps711x_console = { - .name = "ttyCL", - .write = clps711xuart_console_write, - .device = uart_console_device, - .setup = clps711xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &clps711x_reg, -}; - -static int __init clps711xuart_console_init(void) -{ - register_console(&clps711x_console); - return 0; -} -console_initcall(clps711xuart_console_init); - -#define CLPS711X_CONSOLE &clps711x_console -#else -#define CLPS711X_CONSOLE NULL -#endif - -static struct uart_driver clps711x_reg = { - .driver_name = "ttyCL", - .dev_name = "ttyCL", - .major = SERIAL_CLPS711X_MAJOR, - .minor = SERIAL_CLPS711X_MINOR, - .nr = UART_NR, - - .cons = CLPS711X_CONSOLE, -}; - -static int __init clps711xuart_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: CLPS711x driver\n"); - - ret = uart_register_driver(&clps711x_reg); - if (ret) - return ret; - - for (i = 0; i < UART_NR; i++) - uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); - - return 0; -} - -static void __exit clps711xuart_exit(void) -{ - int i; - - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); - - uart_unregister_driver(&clps711x_reg); -} - -module_init(clps711xuart_init); -module_exit(clps711xuart_exit); - -MODULE_AUTHOR("Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("CLPS-711x generic serial driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/serial/cpm_uart/Makefile b/drivers/serial/cpm_uart/Makefile deleted file mode 100644 index e072724..0000000 --- a/drivers/serial/cpm_uart/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the Motorola 8xx FEC ethernet controller -# - -obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o - -# Select the correct platform objects. -cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o -cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o - -cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h deleted file mode 100644 index b754dcf..0000000 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ -#ifndef CPM_UART_H -#define CPM_UART_H - -#include -#include - -#if defined(CONFIG_CPM2) -#include "cpm_uart_cpm2.h" -#elif defined(CONFIG_8xx) -#include "cpm_uart_cpm1.h" -#endif - -#define SERIAL_CPM_MAJOR 204 -#define SERIAL_CPM_MINOR 46 - -#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) -#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) -#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ -#define FLAG_SMC 0x00000002 -#define FLAG_CONSOLE 0x00000001 - -#define UART_SMC1 fsid_smc1_uart -#define UART_SMC2 fsid_smc2_uart -#define UART_SCC1 fsid_scc1_uart -#define UART_SCC2 fsid_scc2_uart -#define UART_SCC3 fsid_scc3_uart -#define UART_SCC4 fsid_scc4_uart - -#define UART_NR fs_uart_nr - -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define SCC_WAIT_CLOSING 100 - -#define GPIO_CTS 0 -#define GPIO_RTS 1 -#define GPIO_DCD 2 -#define GPIO_DSR 3 -#define GPIO_DTR 4 -#define GPIO_RI 5 - -#define NUM_GPIOS (GPIO_RI+1) - -struct uart_cpm_port { - struct uart_port port; - u16 rx_nrfifos; - u16 rx_fifosize; - u16 tx_nrfifos; - u16 tx_fifosize; - smc_t __iomem *smcp; - smc_uart_t __iomem *smcup; - scc_t __iomem *sccp; - scc_uart_t __iomem *sccup; - cbd_t __iomem *rx_bd_base; - cbd_t __iomem *rx_cur; - cbd_t __iomem *tx_bd_base; - cbd_t __iomem *tx_cur; - unsigned char *tx_buf; - unsigned char *rx_buf; - u32 flags; - struct clk *clk; - u8 brg; - uint dp_addr; - void *mem_addr; - dma_addr_t dma_addr; - u32 mem_size; - /* wait on close if needed */ - int wait_closing; - /* value to combine with opcode to form cpm command */ - u32 command; - int gpios[NUM_GPIOS]; -}; - -extern int cpm_uart_nr; -extern struct uart_cpm_port cpm_uart_ports[UART_NR]; - -/* these are located in their respective files */ -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np); -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); -int cpm_uart_init_portdesc(void); -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); -void cpm_uart_freebuf(struct uart_cpm_port *pinfo); - -void smc1_lineif(struct uart_cpm_port *pinfo); -void smc2_lineif(struct uart_cpm_port *pinfo); -void scc1_lineif(struct uart_cpm_port *pinfo); -void scc2_lineif(struct uart_cpm_port *pinfo); -void scc3_lineif(struct uart_cpm_port *pinfo); -void scc4_lineif(struct uart_cpm_port *pinfo); - -/* - virtual to phys transtalion -*/ -static inline unsigned long cpu2cpm_addr(void *addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = (u32)addr; - u32 mem = (u32)pinfo->mem_addr; - /* sane check */ - if (likely(val >= mem && val < mem + pinfo->mem_size)) { - offset = val - mem; - return pinfo->dma_addr + offset; - } - /* something nasty happened */ - BUG(); - return 0; -} - -static inline void *cpm2cpu_addr(unsigned long addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = addr; - u32 dma = (u32)pinfo->dma_addr; - /* sane check */ - if (likely(val >= dma && val < dma + pinfo->mem_size)) { - offset = val - dma; - return pinfo->mem_addr + offset; - } - /* something nasty happened */ - BUG(); - return NULL; -} - - -#endif /* CPM_UART_H */ diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c deleted file mode 100644 index 8692ff9..0000000 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ /dev/null @@ -1,1443 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.c - * - * Driver for CPM (SCC/SMC) serial ports; core driver - * - * Based on arch/ppc/cpm2_io/uart.c by Dan Malek - * Based on ppc8xx.c by Thomas Gleixner - * Based on drivers/serial/amba.c by Russell King - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2005-2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include - -#include "cpm_uart.h" - - -/**************************************************************/ - -static int cpm_uart_tx_pump(struct uart_port *port); -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); -static void cpm_uart_initbd(struct uart_cpm_port *pinfo); - -/**************************************************************/ - -#define HW_BUF_SPD_THRESHOLD 9600 - -/* - * Check, if transmit buffers are processed -*/ -static unsigned int cpm_uart_tx_empty(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - cbd_t __iomem *bdp = pinfo->tx_bd_base; - int ret = 0; - - while (1) { - if (in_be16(&bdp->cbd_sc) & BD_SC_READY) - break; - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { - ret = TIOCSER_TEMT; - break; - } - bdp++; - } - - pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); - - return ret; -} - -static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (pinfo->gpios[GPIO_RTS] >= 0) - gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); - - if (pinfo->gpios[GPIO_DTR] >= 0) - gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); -} - -static unsigned int cpm_uart_get_mctrl(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - if (pinfo->gpios[GPIO_CTS] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_CTS])) - mctrl &= ~TIOCM_CTS; - } - - if (pinfo->gpios[GPIO_DSR] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_DSR])) - mctrl &= ~TIOCM_DSR; - } - - if (pinfo->gpios[GPIO_DCD] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_DCD])) - mctrl &= ~TIOCM_CAR; - } - - if (pinfo->gpios[GPIO_RI] >= 0) { - if (!gpio_get_value(pinfo->gpios[GPIO_RI])) - mctrl |= TIOCM_RNG; - } - - return mctrl; -} - -/* - * Stop transmitter - */ -static void cpm_uart_stop_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop tx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_TX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_TX); -} - -/* - * Start transmitter - */ -static void cpm_uart_start_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:start tx\n", port->line); - - if (IS_SMC(pinfo)) { - if (in_8(&smcp->smc_smcm) & SMCM_TX) - return; - } else { - if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) - return; - } - - if (cpm_uart_tx_pump(port) != 0) { - if (IS_SMC(pinfo)) { - setbits8(&smcp->smc_smcm, SMCM_TX); - } else { - setbits16(&sccp->scc_sccm, UART_SCCM_TX); - } - } -} - -/* - * Stop receiver - */ -static void cpm_uart_stop_rx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop rx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_RX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_RX); -} - -/* - * Enable Modem status interrupts - */ -static void cpm_uart_enable_ms(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:enable ms\n", port->line); -} - -/* - * Generate a break. - */ -static void cpm_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, - break_state); - - if (break_state) - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - else - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static void cpm_uart_int_tx(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:TX INT\n", port->line); - - cpm_uart_tx_pump(port); -} - -#ifdef CONFIG_CONSOLE_POLL -static int serial_polled; -#endif - -/* - * Receive characters - */ -static void cpm_uart_int_rx(struct uart_port *port) -{ - int i; - unsigned char ch; - u8 *cp; - struct tty_struct *tty = port->state->port.tty; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - cbd_t __iomem *bdp; - u16 status; - unsigned int flg; - - pr_debug("CPM uart[%d]:RX INT\n", port->line); - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = pinfo->rx_cur; - for (;;) { -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - /* get status */ - status = in_be16(&bdp->cbd_sc); - /* If this one is empty, return happy */ - if (status & BD_SC_EMPTY) - break; - - /* get number of characters, and check spce in flip-buffer */ - i = in_be16(&bdp->cbd_datlen); - - /* If we have not enough room in tty flip buffer, then we try - * later, which will be the next rx-interrupt or a timeout - */ - if(tty_buffer_request_room(tty, i) < i) { - printk(KERN_WARNING "No room in flip buffer\n"); - return; - } - - /* get pointer */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - /* loop through the buffer */ - while (i-- > 0) { - ch = *cp++; - port->icount.rx++; - flg = TTY_NORMAL; - - if (status & - (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - continue; -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - error_return: - tty_insert_flip_char(tty, ch, flg); - - } /* End while (i--) */ - - /* This BD is ready to be used again. Clear status. get next */ - clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | - BD_SC_OV | BD_SC_ID); - setbits16(&bdp->cbd_sc, BD_SC_EMPTY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - - } /* End for (;;) */ - - /* Write back buffer pointer */ - pinfo->rx_cur = bdp; - - /* activate BH processing */ - tty_flip_buffer_push(tty); - - return; - - /* Error processing */ - - handle_error: - /* Statistics */ - if (status & BD_SC_BR) - port->icount.brk++; - if (status & BD_SC_PR) - port->icount.parity++; - if (status & BD_SC_FR) - port->icount.frame++; - if (status & BD_SC_OV) - port->icount.overrun++; - - /* Mask out ignored conditions */ - status &= port->read_status_mask; - - /* Handle the remaining ones */ - if (status & BD_SC_BR) - flg = TTY_BREAK; - else if (status & BD_SC_PR) - flg = TTY_PARITY; - else if (status & BD_SC_FR) - flg = TTY_FRAME; - - /* overrun does not affect the current character ! */ - if (status & BD_SC_OV) { - ch = 0; - flg = TTY_OVERRUN; - /* We skip this buffer */ - /* CHECK: Is really nothing senseful there */ - /* ASSUMPTION: it contains nothing valid */ - i = 0; - } -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -/* - * Asynchron mode interrupt handler - */ -static irqreturn_t cpm_uart_int(int irq, void *data) -{ - u8 events; - struct uart_port *port = data; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:IRQ\n", port->line); - - if (IS_SMC(pinfo)) { - events = in_8(&smcp->smc_smce); - out_8(&smcp->smc_smce, events); - if (events & SMCM_BRKE) - uart_handle_break(port); - if (events & SMCM_RX) - cpm_uart_int_rx(port); - if (events & SMCM_TX) - cpm_uart_int_tx(port); - } else { - events = in_be16(&sccp->scc_scce); - out_be16(&sccp->scc_scce, events); - if (events & UART_SCCM_BRKE) - uart_handle_break(port); - if (events & UART_SCCM_RX) - cpm_uart_int_rx(port); - if (events & UART_SCCM_TX) - cpm_uart_int_tx(port); - } - return (events) ? IRQ_HANDLED : IRQ_NONE; -} - -static int cpm_uart_startup(struct uart_port *port) -{ - int retval; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:startup\n", port->line); - - /* If the port is not the console, make sure rx is disabled. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Disable UART rx */ - if (IS_SMC(pinfo)) { - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - } else { - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - } - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - } - /* Install interrupt handler. */ - retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); - if (retval) - return retval; - - /* Startup rx-int */ - if (IS_SMC(pinfo)) { - setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); - } else { - setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); - } - - return 0; -} - -inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) -{ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(pinfo->wait_closing); -} - -/* - * Shutdown the uart - */ -static void cpm_uart_shutdown(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:shutdown\n", port->line); - - /* free interrupt handler */ - free_irq(port->irq, port); - - /* If the port is not the console, disable Rx and Tx. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Wait for all the BDs marked sent */ - while(!cpm_uart_tx_empty(port)) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2); - } - - if (pinfo->wait_closing) - cpm_uart_wait_until_send(pinfo); - - /* Stop uarts */ - if (IS_SMC(pinfo)) { - smc_t __iomem *smcp = pinfo->smcp; - clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); - } else { - scc_t __iomem *sccp = pinfo->sccp; - clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - } - - /* Shut them really down and reinit buffer descriptors */ - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - } - - cpm_uart_initbd(pinfo); - } -} - -static void cpm_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - int baud; - unsigned long flags; - u16 cval, scval, prev_mode; - int bits, sbits; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:set_termios\n", port->line); - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud <= HW_BUF_SPD_THRESHOLD || - (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) - pinfo->rx_fifosize = 1; - else - pinfo->rx_fifosize = RX_BUF_SIZE; - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - cval = 0; - scval = 0; - - /* byte size */ - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = 5; - break; - case CS6: - bits = 6; - break; - case CS7: - bits = 7; - break; - case CS8: - bits = 8; - break; - /* Never happens, but GCC is too dumb to figure it out */ - default: - bits = 8; - break; - } - sbits = bits - 5; - - if (termios->c_cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PSMR_SL; - bits++; - } - - if (termios->c_cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PSMR_PEN; - bits++; - if (!(termios->c_cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); - } - } - - /* - * Update the timeout - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Set up parity check flag - */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - - port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (termios->c_iflag & INPCK) - port->read_status_mask |= BD_SC_FR | BD_SC_PR; - if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) - port->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - port->read_status_mask &= ~BD_SC_EMPTY; - - spin_lock_irqsave(&port->lock, flags); - - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; - if (IS_SMC(pinfo)) { - /* - * MRBLR can be changed while an SMC/SCC is operating only - * if it is done in a single bus cycle with one 16-bit move - * (not two 8-bit bus cycles back-to-back). This occurs when - * the cp shifts control to the next RxBD, so the change does - * not take effect immediately. To guarantee the exact RxBD - * on which the change occurs, change MRBLR only while the - * SMC/SCC receiver is disabled. - */ - out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); - /* Output in *one* operation, so we don't interrupt RX/TX if they - * were already enabled. */ - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | - SMCMR_SM_UART | prev_mode); - } else { - out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sccp->scc_psmr, (sbits << 12) | scval); - } - - if (pinfo->clk) - clk_set_rate(pinfo->clk, baud); - else - cpm_set_brg(pinfo->brg - 1, baud); - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *cpm_uart_type(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:uart_type\n", port->line); - - return port->type == PORT_CPM ? "CPM UART" : NULL; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int cpm_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - int ret = 0; - - pr_debug("CPM uart[%d]:verify_port\n", port->line); - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static int cpm_uart_tx_pump(struct uart_port *port) -{ - cbd_t __iomem *bdp; - u8 *p; - int count; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - struct circ_buf *xmit = &port->state->xmit; - - /* Handle xon/xoff */ - if (port->x_char) { - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - *p++ = port->x_char; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - pinfo->tx_cur = bdp; - - port->icount.tx++; - port->x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - cpm_uart_stop_tx(port); - return 0; - } - - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && - xmit->tail != xmit->head) { - count = 0; - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - while (count < pinfo->tx_fifosize) { - *p++ = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - count++; - if (xmit->head == xmit->tail) - break; - } - out_be16(&bdp->cbd_datlen, count); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - } - pinfo->tx_cur = bdp; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) { - cpm_uart_stop_tx(port); - return 0; - } - - return 1; -} - -/* - * init buffer descriptors - */ -static void cpm_uart_initbd(struct uart_cpm_port *pinfo) -{ - int i; - u8 *mem_addr; - cbd_t __iomem *bdp; - - pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr; - bdp = pinfo->rx_cur = pinfo->rx_bd_base; - for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); - mem_addr += pinfo->rx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); - bdp = pinfo->tx_cur = pinfo->tx_bd_base; - for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_INTRPT); - mem_addr += pinfo->tx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); -} - -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) -{ - scc_t __iomem *scp; - scc_uart_t __iomem *sup; - - pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); - - scp = pinfo->sccp; - sup = pinfo->sccup; - - /* Store address */ - out_be16(&pinfo->sccup->scc_genscc.scc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->sccup->scc_genscc.scc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - - /* Set up the uart parameters in the - * parameter ram. - */ - - cpm_set_scc_fcr(sup); - - out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); - out_be16(&sup->scc_brkcr, 1); - out_be16(&sup->scc_parec, 0); - out_be16(&sup->scc_frmec, 0); - out_be16(&sup->scc_nosec, 0); - out_be16(&sup->scc_brkec, 0); - out_be16(&sup->scc_uaddr1, 0); - out_be16(&sup->scc_uaddr2, 0); - out_be16(&sup->scc_toseq, 0); - out_be16(&sup->scc_char1, 0x8000); - out_be16(&sup->scc_char2, 0x8000); - out_be16(&sup->scc_char3, 0x8000); - out_be16(&sup->scc_char4, 0x8000); - out_be16(&sup->scc_char5, 0x8000); - out_be16(&sup->scc_char6, 0x8000); - out_be16(&sup->scc_char7, 0x8000); - out_be16(&sup->scc_char8, 0x8000); - out_be16(&sup->scc_rccm, 0xc0ff); - - /* Send the CPM an initialize command. - */ - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be32(&scp->scc_gsmrh, 0); - out_be32(&scp->scc_gsmrl, - SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Enable rx interrupts and clear all pending events. */ - out_be16(&scp->scc_sccm, 0); - out_be16(&scp->scc_scce, 0xffff); - out_be16(&scp->scc_dsr, 0x7e7e); - out_be16(&scp->scc_psmr, 0x3000); - - setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -} - -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) -{ - smc_t __iomem *sp; - smc_uart_t __iomem *up; - - pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); - - sp = pinfo->smcp; - up = pinfo->smcup; - - /* Store address */ - out_be16(&pinfo->smcup->smc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->smcup->smc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - -/* - * In case SMC1 is being relocated... - */ -#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) - out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); - out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); - out_be32(&up->smc_rstate, 0); - out_be32(&up->smc_tstate, 0); - out_be16(&up->smc_brkcr, 1); /* number of break chars */ - out_be16(&up->smc_brkec, 0); -#endif - - /* Set up the uart parameters in the - * parameter ram. - */ - cpm_set_smc_fcr(up); - - /* Using idle character time requires some additional tuning. */ - out_be16(&up->smc_mrblr, pinfo->rx_fifosize); - out_be16(&up->smc_maxidl, pinfo->rx_fifosize); - out_be16(&up->smc_brklen, 0); - out_be16(&up->smc_brkec, 0); - out_be16(&up->smc_brkcr, 1); - - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); - - /* Enable only rx interrupts clear all pending events. */ - out_8(&sp->smc_smcm, 0); - out_8(&sp->smc_smce, 0xff); - - setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); -} - -/* - * Initialize port. This is called from early_console stuff - * so we have to be careful here ! - */ -static int cpm_uart_request_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int ret; - - pr_debug("CPM uart[%d]:request port\n", port->line); - - if (pinfo->flags & FLAG_CONSOLE) - return 0; - - if (IS_SMC(pinfo)) { - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 0); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - return 0; -} - -static void cpm_uart_release_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_uart_freebuf(pinfo); -} - -/* - * Configure/autoconfigure the port. - */ -static void cpm_uart_config_port(struct uart_port *port, int flags) -{ - pr_debug("CPM uart[%d]:config_port\n", port->line); - - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_CPM; - cpm_uart_request_port(port); - } -} - -#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) -/* - * Write a string to the serial port - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_early_write(struct uart_cpm_port *pinfo, - const char *string, u_int count) -{ - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cpm_outp_addr; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, string++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = *string; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*string == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* Serial polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -#define GDB_BUF_SIZE 512 /* power of 2, please */ - -static char poll_buf[GDB_BUF_SIZE]; -static char *pollp; -static int poll_chars; - -static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) -{ - u_char c, *cp; - volatile cbd_t *bdp; - int i; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->rx_cur; - while (bdp->cbd_sc & BD_SC_EMPTY) - ; - - /* If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); - - if (obuf) { - i = c = bdp->cbd_datlen; - while (i-- > 0) - *obuf++ = *cp++; - } else - c = *cp; - bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); - bdp->cbd_sc |= BD_SC_EMPTY; - - if (bdp->cbd_sc & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - pinfo->rx_cur = (cbd_t *)bdp; - - return (int)c; -} - -static int cpm_get_poll_char(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (!serial_polled) { - serial_polled = 1; - poll_chars = 0; - } - if (poll_chars <= 0) { - poll_chars = poll_wait_key(poll_buf, pinfo); - pollp = poll_buf; - } - poll_chars--; - return *pollp++; -} - -static void cpm_put_poll_char(struct uart_port *port, - unsigned char c) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - static char ch[2]; - - ch[0] = (char)c; - cpm_uart_early_write(pinfo, ch, 1); -} -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops cpm_uart_pops = { - .tx_empty = cpm_uart_tx_empty, - .set_mctrl = cpm_uart_set_mctrl, - .get_mctrl = cpm_uart_get_mctrl, - .stop_tx = cpm_uart_stop_tx, - .start_tx = cpm_uart_start_tx, - .stop_rx = cpm_uart_stop_rx, - .enable_ms = cpm_uart_enable_ms, - .break_ctl = cpm_uart_break_ctl, - .startup = cpm_uart_startup, - .shutdown = cpm_uart_shutdown, - .set_termios = cpm_uart_set_termios, - .type = cpm_uart_type, - .release_port = cpm_uart_release_port, - .request_port = cpm_uart_request_port, - .config_port = cpm_uart_config_port, - .verify_port = cpm_uart_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = cpm_get_poll_char, - .poll_put_char = cpm_put_poll_char, -#endif -}; - -struct uart_cpm_port cpm_uart_ports[UART_NR]; - -static int cpm_uart_init_port(struct device_node *np, - struct uart_cpm_port *pinfo) -{ - const u32 *data; - void __iomem *mem, *pram; - int len; - int ret; - int i; - - data = of_get_property(np, "clock", NULL); - if (data) { - struct clk *clk = clk_get(NULL, (const char*)data); - if (!IS_ERR(clk)) - pinfo->clk = clk; - } - if (!pinfo->clk) { - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; - } - pinfo->brg = *data; - } - - data = of_get_property(np, "fsl,cpm-command", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-command property.\n", np->name); - return -EINVAL; - } - pinfo->command = *data; - - mem = of_iomap(np, 0); - if (!mem) - return -ENOMEM; - - if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || - of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { - pinfo->sccp = mem; - pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); - } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || - of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { - pinfo->flags |= FLAG_SMC; - pinfo->smcp = mem; - pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); - } else { - ret = -ENODEV; - goto out_mem; - } - - if (!pram) { - ret = -ENOMEM; - goto out_mem; - } - - pinfo->tx_nrfifos = TX_NUM_FIFO; - pinfo->tx_fifosize = TX_BUF_SIZE; - pinfo->rx_nrfifos = RX_NUM_FIFO; - pinfo->rx_fifosize = RX_BUF_SIZE; - - pinfo->port.uartclk = ppc_proc_freq; - pinfo->port.mapbase = (unsigned long)mem; - pinfo->port.type = PORT_CPM; - pinfo->port.ops = &cpm_uart_pops, - pinfo->port.iotype = UPIO_MEM; - pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; - spin_lock_init(&pinfo->port.lock); - - pinfo->port.irq = of_irq_to_resource(np, 0, NULL); - if (pinfo->port.irq == NO_IRQ) { - ret = -EINVAL; - goto out_pram; - } - - for (i = 0; i < NUM_GPIOS; i++) - pinfo->gpios[i] = of_get_gpio(np, i); - -#ifdef CONFIG_PPC_EARLY_DEBUG_CPM - udbg_putc = NULL; -#endif - - return cpm_uart_request_port(&pinfo->port); - -out_pram: - cpm_uart_unmap_pram(pinfo, pram); -out_mem: - iounmap(mem); - return ret; -} - -#ifdef CONFIG_SERIAL_CPM_CONSOLE -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_console_write(struct console *co, const char *s, - u_int count) -{ - struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned long flags; - int nolock = oops_in_progress; - - if (unlikely(nolock)) { - local_irq_save(flags); - } else { - spin_lock_irqsave(&pinfo->port.lock, flags); - } - - cpm_uart_early_write(pinfo, s, count); - - if (unlikely(nolock)) { - local_irq_restore(flags); - } else { - spin_unlock_irqrestore(&pinfo->port.lock, flags); - } -} - - -static int __init cpm_uart_console_setup(struct console *co, char *options) -{ - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - struct uart_cpm_port *pinfo; - struct uart_port *port; - - struct device_node *np = NULL; - int i = 0; - - if (co->index >= UART_NR) { - printk(KERN_ERR "cpm_uart: console index %d too high\n", - co->index); - return -ENODEV; - } - - do { - np = of_find_node_by_type(np, "serial"); - if (!np) - return -ENODEV; - - if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) - i--; - } while (i++ != co->index); - - pinfo = &cpm_uart_ports[co->index]; - - pinfo->flags |= FLAG_CONSOLE; - port = &pinfo->port; - - ret = cpm_uart_init_port(np, pinfo); - of_node_put(np); - if (ret) - return ret; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - if ((baud = uart_baudrate()) == -1) - baud = 9600; - } - - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 1); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - uart_set_options(port, co, baud, parity, bits, flow); - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); - - return 0; -} - -static struct uart_driver cpm_reg; -static struct console cpm_scc_uart_console = { - .name = "ttyCPM", - .write = cpm_uart_console_write, - .device = uart_console_device, - .setup = cpm_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &cpm_reg, -}; - -static int __init cpm_uart_console_init(void) -{ - register_console(&cpm_scc_uart_console); - return 0; -} - -console_initcall(cpm_uart_console_init); - -#define CPM_UART_CONSOLE &cpm_scc_uart_console -#else -#define CPM_UART_CONSOLE NULL -#endif - -static struct uart_driver cpm_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyCPM", - .dev_name = "ttyCPM", - .major = SERIAL_CPM_MAJOR, - .minor = SERIAL_CPM_MINOR, - .cons = CPM_UART_CONSOLE, - .nr = UART_NR, -}; - -static int probe_index; - -static int __devinit cpm_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - int index = probe_index++; - struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; - int ret; - - pinfo->port.line = index; - - if (index >= UART_NR) - return -ENODEV; - - dev_set_drvdata(&ofdev->dev, pinfo); - - /* initialize the device pointer for the port */ - pinfo->port.dev = &ofdev->dev; - - ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); - if (ret) - return ret; - - return uart_add_one_port(&cpm_reg, &pinfo->port); -} - -static int __devexit cpm_uart_remove(struct platform_device *ofdev) -{ - struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); - return uart_remove_one_port(&cpm_reg, &pinfo->port); -} - -static struct of_device_id cpm_uart_match[] = { - { - .compatible = "fsl,cpm1-smc-uart", - }, - { - .compatible = "fsl,cpm1-scc-uart", - }, - { - .compatible = "fsl,cpm2-smc-uart", - }, - { - .compatible = "fsl,cpm2-scc-uart", - }, - {} -}; - -static struct of_platform_driver cpm_uart_driver = { - .driver = { - .name = "cpm_uart", - .owner = THIS_MODULE, - .of_match_table = cpm_uart_match, - }, - .probe = cpm_uart_probe, - .remove = cpm_uart_remove, - }; - -static int __init cpm_uart_init(void) -{ - int ret = uart_register_driver(&cpm_reg); - if (ret) - return ret; - - ret = of_register_platform_driver(&cpm_uart_driver); - if (ret) - uart_unregister_driver(&cpm_reg); - - return ret; -} - -static void __exit cpm_uart_exit(void) -{ - of_unregister_platform_driver(&cpm_uart_driver); - uart_unregister_driver(&cpm_reg); -} - -module_init(cpm_uart_init); -module_exit(cpm_uart_exit); - -MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); -MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c deleted file mode 100644 index 3fc1d66..0000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.c - * - * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - return of_iomap(np, 1); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - /* was hostalloc but changed cause it blows away the */ - /* large tlb mapping when pinning the kernel area */ - mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); - dma_addr = (u32)cpm_dpram_phys(mem_addr); - } else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; /* virtual address*/ - pinfo->dma_addr = dma_addr; /* physical address*/ - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h deleted file mode 100644 index 10eecd6..0000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm1 - * - */ - -#ifndef CPM_UART_CPM1_H -#define CPM_UART_CPM1_H - -#include - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); - out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) -{ - out_8(&up->smc_rfcr, SMC_EB); - out_8(&up->smc_tfcr, SMC_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c deleted file mode 100644 index 814ac00..0000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart_cpm2.c - * - * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - void __iomem *pram; - unsigned long offset; - struct resource res; - resource_size_t len; - - /* Don't remap parameter RAM if it has already been initialized - * during console setup. - */ - if (IS_SMC(port) && port->smcup) - return port->smcup; - else if (!IS_SMC(port) && port->sccup) - return port->sccup; - - if (of_address_to_resource(np, 1, &res)) - return NULL; - - len = resource_size(&res); - pram = ioremap(res.start, len); - if (!pram) - return NULL; - - if (!IS_SMC(port)) - return pram; - - if (len != 2) { - printk(KERN_WARNING "cpm_uart[%d]: device tree references " - "SMC pram, using boot loader/wrapper pram mapping. " - "Please fix your device tree to reference the pram " - "base register instead.\n", - port->port.line); - return pram; - } - - offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); - out_be16(pram, offset); - iounmap(pram); - return cpm_muram_addr(offset); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - if (!IS_SMC(port)) - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 __iomem *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - mem_addr = kzalloc(memsz, GFP_NOWAIT); - dma_addr = virt_to_bus(mem_addr); - } - else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; - pinfo->dma_addr = dma_addr; - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h deleted file mode 100644 index 7194c63..0000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm2 - * - */ - -#ifndef CPM_UART_CPM2_H -#define CPM_UART_CPM2_H - -#include - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) -{ - out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c deleted file mode 100644 index bcc31f2..0000000 --- a/drivers/serial/crisv10.c +++ /dev/null @@ -1,4573 +0,0 @@ -/* - * Serial port driver for the ETRAX 100LX chip - * - * Copyright (C) 1998-2007 Axis Communications AB - * - * Many, many authors. Based once upon a time on serial.c for 16x50. - * - */ - -static char *serial_version = "$Revision: 1.25 $"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -/* non-arch dependent serial structures are in linux/serial.h */ -#include -/* while we keep our own stuff (struct e100_serial) in a local .h file */ -#include "crisv10.h" -#include -#include - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -#ifndef CONFIG_ETRAX_FAST_TIMER -#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" -#endif -#endif - -#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ - (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) -#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" -#endif - -#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) -#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" -#endif - -/* - * All of the compatibilty code so we can compile serial.c against - * older kernels is hidden in serial_compat.h - */ -#if defined(LOCAL_HEADERS) -#include "serial_compat.h" -#endif - -struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -//#define SERIAL_DEBUG_INTR -//#define SERIAL_DEBUG_OPEN -//#define SERIAL_DEBUG_FLOW -//#define SERIAL_DEBUG_DATA -//#define SERIAL_DEBUG_THROTTLE -//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ -//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ - -/* Enable this to use serial interrupts to handle when you - expect the first received event on the serial port to - be an error, break or similar. Used to be able to flash IRMA - from eLinux */ -#define SERIAL_HANDLE_EARLY_ERRORS - -/* Currently 16 descriptors x 128 bytes = 2048 bytes */ -#define SERIAL_DESCR_BUF_SIZE 256 - -#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ -#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE - -/* We don't want to load the system with massive fast timer interrupt - * on high baudrates so limit it to 250 us (4kHz) */ -#define MIN_FLUSH_TIME_USEC 250 - -/* Add an x here to log a lot of timer stuff */ -#define TIMERD(x) -/* Debug details of interrupt handling */ -#define DINTR1(x) /* irq on/off, errors */ -#define DINTR2(x) /* tx and rx */ -/* Debug flip buffer stuff */ -#define DFLIP(x) -/* Debug flow control and overview of data flow */ -#define DFLOW(x) -#define DBAUD(x) -#define DLOG_INT_TRIG(x) - -//#define DEBUG_LOG_INCLUDED -#ifndef DEBUG_LOG_INCLUDED -#define DEBUG_LOG(line, string, value) -#else -struct debug_log_info -{ - unsigned long time; - unsigned long timer_data; -// int line; - const char *string; - int value; -}; -#define DEBUG_LOG_SIZE 4096 - -struct debug_log_info debug_log[DEBUG_LOG_SIZE]; -int debug_log_pos = 0; - -#define DEBUG_LOG(_line, _string, _value) do { \ - if ((_line) == SERIAL_DEBUG_LINE) {\ - debug_log_func(_line, _string, _value); \ - }\ -}while(0) - -void debug_log_func(int line, const char *string, int value) -{ - if (debug_log_pos < DEBUG_LOG_SIZE) { - debug_log[debug_log_pos].time = jiffies; - debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; -// debug_log[debug_log_pos].line = line; - debug_log[debug_log_pos].string = string; - debug_log[debug_log_pos].value = value; - debug_log_pos++; - } - /*printk(string, value);*/ -} -#endif - -#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS -/* Default number of timer ticks before flushing rx fifo - * When using "little data, low latency applications: use 0 - * When using "much data applications (PPP)" use ~5 - */ -#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 -#endif - -unsigned long timer_data_to_ns(unsigned long timer_data); - -static void change_speed(struct e100_serial *info); -static void rs_throttle(struct tty_struct * tty); -static void rs_wait_until_sent(struct tty_struct *tty, int timeout); -static int rs_write(struct tty_struct *tty, - const unsigned char *buf, int count); -#ifdef CONFIG_ETRAX_RS485 -static int e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count); -#endif -static int get_lsr_info(struct e100_serial *info, unsigned int *value); - - -#define DEF_BAUD 115200 /* 115.2 kbit/s */ -#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ -/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ -#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ - -/* offsets from R_SERIALx_CTRL */ - -#define REG_DATA 0 -#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ -#define REG_TR_DATA 0 -#define REG_STATUS 1 -#define REG_TR_CTRL 1 -#define REG_REC_CTRL 2 -#define REG_BAUD 3 -#define REG_XOFF 4 /* this is a 32 bit register */ - -/* The bitfields are the same for all serial ports */ -#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) -#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) -#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) -#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) -#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) - -#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) - -/* Values for info->errorcode */ -#define ERRCODE_SET_BREAK (TTY_BREAK) -#define ERRCODE_INSERT 0x100 -#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) - -#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; - -/* - * General note regarding the use of IO_* macros in this file: - * - * We will use the bits defined for DMA channel 6 when using various - * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are - * the same for all channels (which of course they are). - * - * We will also use the bits defined for serial port 0 when writing commands - * to the different ports, as these bits too are the same for all ports. - */ - - -/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ -static const unsigned long e100_ser_int_mask = 0 -#ifdef CONFIG_ETRAX_SERIAL_PORT0 -| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1 -| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2 -| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3 -| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) -#endif -; -unsigned long r_alt_ser_baudrate_shadow = 0; - -/* this is the data for the four serial ports in the etrax100 */ -/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ -/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ - -static struct e100_serial rs_table[] = { - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL0_CTRL, - .irq = 1U << 12, /* uses DMA 6 and 7 */ - .oclrintradr = R_DMA_CH6_CLR_INTR, - .ofirstadr = R_DMA_CH6_FIRST, - .ocmdadr = R_DMA_CH6_CMD, - .ostatusadr = R_DMA_CH6_STATUS, - .iclrintradr = R_DMA_CH7_CLR_INTR, - .ifirstadr = R_DMA_CH7_FIRST, - .icmdadr = R_DMA_CH7_CMD, - .idescradr = R_DMA_CH7_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 2, - .dma_owner = dma_ser0, - .io_if = if_serial_0, -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - .enabled = 1, -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER0_TX_DMA_NBR, - .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 0 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER0_RX_DMA_NBR, - .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 0 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - -}, /* ttyS0 */ -#ifndef CONFIG_SVINTO_SIM - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL1_CTRL, - .irq = 1U << 16, /* uses DMA 8 and 9 */ - .oclrintradr = R_DMA_CH8_CLR_INTR, - .ofirstadr = R_DMA_CH8_FIRST, - .ocmdadr = R_DMA_CH8_CMD, - .ostatusadr = R_DMA_CH8_STATUS, - .iclrintradr = R_DMA_CH9_CLR_INTR, - .ifirstadr = R_DMA_CH9_FIRST, - .icmdadr = R_DMA_CH9_CMD, - .idescradr = R_DMA_CH9_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 3, - .dma_owner = dma_ser1, - .io_if = if_serial_1, -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - .enabled = 1, - .io_if_description = "ser1", -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER1_TX_DMA_NBR, - .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 1 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER1_RX_DMA_NBR, - .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 1 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_in_irq_nbr = 0, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif -}, /* ttyS1 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL2_CTRL, - .irq = 1U << 4, /* uses DMA 2 and 3 */ - .oclrintradr = R_DMA_CH2_CLR_INTR, - .ofirstadr = R_DMA_CH2_FIRST, - .ocmdadr = R_DMA_CH2_CMD, - .ostatusadr = R_DMA_CH2_STATUS, - .iclrintradr = R_DMA_CH3_CLR_INTR, - .ifirstadr = R_DMA_CH3_FIRST, - .icmdadr = R_DMA_CH3_CMD, - .idescradr = R_DMA_CH3_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 0, - .dma_owner = dma_ser2, - .io_if = if_serial_2, -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - .enabled = 1, - .io_if_description = "ser2", -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER2_TX_DMA_NBR, - .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 2 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER2_RX_DMA_NBR, - .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 2 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - }, /* ttyS2 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL3_CTRL, - .irq = 1U << 8, /* uses DMA 4 and 5 */ - .oclrintradr = R_DMA_CH4_CLR_INTR, - .ofirstadr = R_DMA_CH4_FIRST, - .ocmdadr = R_DMA_CH4_CMD, - .ostatusadr = R_DMA_CH4_STATUS, - .iclrintradr = R_DMA_CH5_CLR_INTR, - .ifirstadr = R_DMA_CH5_FIRST, - .icmdadr = R_DMA_CH5_CMD, - .idescradr = R_DMA_CH5_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 1, - .dma_owner = dma_ser3, - .io_if = if_serial_3, -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - .enabled = 1, - .io_if_description = "ser3", -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER3_TX_DMA_NBR, - .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 3 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER3_RX_DMA_NBR, - .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 3 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - } /* ttyS3 */ -#endif -}; - - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static struct fast_timer fast_timers[NR_PORTS]; -#endif - -#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY -#define PROCSTAT(x) x -struct ser_statistics_type { - int overrun_cnt; - int early_errors_cnt; - int ser_ints_ok_cnt; - int errors_cnt; - unsigned long int processing_flip; - unsigned long processing_flip_still_room; - unsigned long int timeout_flush_cnt; - int rx_dma_ints; - int tx_dma_ints; - int rx_tot; - int tx_tot; -}; - -static struct ser_statistics_type ser_stat[NR_PORTS]; - -#else - -#define PROCSTAT(x) - -#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ - -/* RS-485 */ -#if defined(CONFIG_ETRAX_RS485) -#ifdef CONFIG_ETRAX_FAST_TIMER -static struct fast_timer fast_timers_rs485[NR_PORTS]; -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PA) -static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) -static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; -#endif -#endif - -/* Info and macros needed for each ports extra control/status signals. */ -#define E100_STRUCT_PORT(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (R_PORT_PA_DATA): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (R_PORT_PB_DATA):&dummy_ser[line])) - -#define E100_STRUCT_SHADOW(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (&port_pa_data_shadow): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (&port_pb_data_shadow):&dummy_ser[line])) -#define E100_STRUCT_MASK(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (1<= 0)? \ - (1< 3.3V to RS-232 driver -> -12V on RS-232 level - * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level - * - * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip - */ - -/* Output */ -#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) -/* Input */ -#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) - -/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ -/* Is an output */ -#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) - -/* Normally inputs */ -#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) -#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) - -/* Input */ -#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) - - -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the memcpy_fromfs blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf; -static DEFINE_MUTEX(tmp_buf_mutex); - -/* Calculate the chartime depending on baudrate, numbor of bits etc. */ -static void update_char_time(struct e100_serial * info) -{ - tcflag_t cflags = info->port.tty->termios->c_cflag; - int bits; - - /* calc. number of bits / data byte */ - /* databits + startbit and 1 stopbit */ - if ((cflags & CSIZE) == CS7) - bits = 9; - else - bits = 10; - - if (cflags & CSTOPB) /* 2 stopbits ? */ - bits++; - - if (cflags & PARENB) /* parity bit ? */ - bits++; - - /* calc timeout */ - info->char_time_usec = ((bits * 1000000) / info->baud) + 1; - info->flush_time_usec = 4*info->char_time_usec; - if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) - info->flush_time_usec = MIN_FLUSH_TIME_USEC; - -} - -/* - * This function maps from the Bxxxx defines in asm/termbits.h into real - * baud rates. - */ - -static int -cflag_to_baud(unsigned int cflag) -{ - static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 }; - - static int ext_baud_table[] = { - 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, - 0, 0, 0, 0, 0, 0, 0, 0 }; - - if (cflag & CBAUDEX) - return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - return baud_table[cflag & CBAUD]; -} - -/* and this maps to an etrax100 hardware baud constant */ - -static unsigned char -cflag_to_etrax_baud(unsigned int cflag) -{ - char retval; - - static char baud_table[] = { - -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; - - static char ext_baud_table[] = { - -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; - - if (cflag & CBAUDEX) - retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - retval = baud_table[cflag & CBAUD]; - - if (retval < 0) { - printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); - retval = 5; /* choose default 9600 instead */ - } - - return retval | (retval << 4); /* choose same for both TX and RX */ -} - - -/* Various static support functions */ - -/* Functions to set or clear DTR/RTS on the requested line */ -/* It is complicated by the fact that RTS is a serial port register, while - * DTR might not be implemented in the HW at all, and if it is, it can be on - * any general port. - */ - - -static inline void -e100_dtr(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - unsigned char mask = e100_modem_pins[info->line].dtr_mask; - -#ifdef SERIAL_DEBUG_IO - printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); - printk("ser%i shadow before 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif - /* DTR is active low */ - { - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].dtr_shadow &= ~mask; - *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; - local_irq_restore(flags); - } - -#ifdef SERIAL_DEBUG_IO - printk("ser%i shadow after 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif -#endif -} - -/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive - * 0=0V , 1=3.3V - */ -static inline void -e100_rts(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - unsigned long flags; - local_irq_save(flags); - info->rx_ctrl &= ~E100_RTS_MASK; - info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - local_irq_restore(flags); -#ifdef SERIAL_DEBUG_IO - printk("ser%i rts %i\n", info->line, set); -#endif -#endif -} - - -/* If this behaves as a modem, RI and CD is an output */ -static inline void -e100_ri_out(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - /* RI is active low */ - { - unsigned char mask = e100_modem_pins[info->line].ri_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].ri_shadow &= ~mask; - *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; - local_irq_restore(flags); - } -#endif -} -static inline void -e100_cd_out(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - /* CD is active low */ - { - unsigned char mask = e100_modem_pins[info->line].cd_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].cd_shadow &= ~mask; - *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; - local_irq_restore(flags); - } -#endif -} - -static inline void -e100_disable_rx(struct e100_serial *info) -{ -#ifndef CONFIG_SVINTO_SIM - /* disable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif -} - -static inline void -e100_enable_rx(struct e100_serial *info) -{ -#ifndef CONFIG_SVINTO_SIM - /* enable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif -} - -/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ - -static inline void -e100_disable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); -} - -static inline void -e100_enable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); -} - -/* the tx DMA uses only dma_descr interrupt */ - -static void e100_disable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = info->irq; -} - -static void e100_enable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = info->irq; -} - -static void e100_disable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable output DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == - IO_STATE(R_GEN_CONFIG, dma6, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == - IO_STATE(R_GEN_CONFIG, dma8, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == - IO_STATE(R_GEN_CONFIG, dma2, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == - IO_STATE(R_GEN_CONFIG, dma4, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); - /* Enable output DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -static void e100_disable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable input DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == - IO_STATE(R_GEN_CONFIG, dma7, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == - IO_STATE(R_GEN_CONFIG, dma9, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == - IO_STATE(R_GEN_CONFIG, dma3, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == - IO_STATE(R_GEN_CONFIG, dma5, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - /* Enable input DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -#ifdef SERIAL_HANDLE_EARLY_ERRORS -/* in order to detect and fix errors on the first byte - we have to use the serial interrupts as well. */ - -static inline void -e100_disable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); -} - -static inline void -e100_enable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+2*info->line), - (1U << (8+2*info->line))); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); -} -#endif - -static inline void -e100_disable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); -} - -static inline void -e100_enable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+1+2*info->line), - (1U << (8+1+2*info->line))); -#endif - DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); -} - -static inline void e100_enable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_enable_rxdma_irq(info); - else - e100_enable_serial_data_irq(info); -} -static inline void e100_disable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_disable_rxdma_irq(info); - else - e100_disable_serial_data_irq(info); -} - -#if defined(CONFIG_ETRAX_RS485) -/* Enable RS-485 mode on selected port. This is UGLY. */ -static int -e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 1); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); -#endif - - info->rs485 = *r; - - /* Maximum delay before RTS equal to 1000 */ - if (info->rs485.delay_rts_before_send >= 1000) - info->rs485.delay_rts_before_send = 1000; - -/* printk("rts: on send = %i, after = %i, enabled = %i", - info->rs485.rts_on_send, - info->rs485.rts_after_sent, - info->rs485.enabled - ); -*/ - return 0; -} - -static int -e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - int old_value = (info->rs485.flags) & SER_RS485_ENABLED; - - /* rs485 is always implicitly enabled if we're using the ioctl() - * but it doesn't have to be set in the serial_rs485 - * (to be backward compatible with old apps) - * So we store, set and restore it. - */ - info->rs485.flags |= SER_RS485_ENABLED; - /* rs_write now deals with RS485 if enabled */ - count = rs_write(tty, buf, count); - if (!old_value) - info->rs485.flags &= ~(SER_RS485_ENABLED); - return count; -} - -#ifdef CONFIG_ETRAX_FAST_TIMER -/* Timer function to toggle RTS when using FAST_TIMER */ -static void rs485_toggle_rts_timer_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers_rs485[info->line].function = NULL; - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rx_irq(info); -#endif -} -#endif -#endif /* CONFIG_ETRAX_RS485 */ - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter using the XOFF registers, as necessary. - * ------------------------------------------------------------ - */ - -static void -rs_stop(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, - STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); - if (tty->termios->c_iflag & IXON ) { - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); - } -} - -static void -rs_start(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (tty->termios->c_iflag & IXON ) { - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - if (!info->uses_dma_out && - info->xmit.head != info->xmit.tail && info->xmit.buf) - e100_enable_serial_tx_ready_irq(info); - - local_irq_restore(flags); - } -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void rs_sched_event(struct e100_serial *info, int event) -{ - if (info->event & (1 << event)) - return; - info->event |= 1 << event; - schedule_work(&info->work); -} - -/* The output DMA channel is free - use it to send as many chars as possible - * NOTES: - * We don't pay attention to info->x_char, which means if the TTY wants to - * use XON/XOFF it will set info->x_char but we won't send any X char! - * - * To implement this, we'd just start a DMA send of 1 byte pointing at a - * buffer containing the X char, and skip updating xmit. We'd also have to - * check if the last sent char was the X char when we enter this function - * the next time, to avoid updating xmit with the sent X value. - */ - -static void -transmit_chars_dma(struct e100_serial *info) -{ - unsigned int c, sentl; - struct etrax_dma_descr *descr; - -#ifdef CONFIG_SVINTO_SIM - /* This will output too little if tail is not 0 always since - * we don't reloop to send the other part. Anyway this SHOULD be a - * no-op - transmit_chars_dma would never really be called during sim - * since rs_write does not write into the xmit buffer then. - */ - if (info->xmit.tail) - printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); - if (info->xmit.head != info->xmit.tail) { - SIMCOUT(info->xmit.buf + info->xmit.tail, - CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE)); - info->xmit.head = info->xmit.tail; /* move back head */ - info->tr_running = 0; - } - return; -#endif - /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - -#ifdef SERIAL_DEBUG_INTR - if (info->line == SERIAL_DEBUG_LINE) - printk("tc\n"); -#endif - if (!info->tr_running) { - /* weirdo... we shouldn't get here! */ - printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); - return; - } - - descr = &info->tr_descr; - - /* first get the amount of bytes sent during the last DMA transfer, - and update xmit accordingly */ - - /* if the stop bit was not set, all data has been sent */ - if (!(descr->status & d_stop)) { - sentl = descr->sw_len; - } else - /* otherwise we find the amount of data sent here */ - sentl = descr->hw_len; - - DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); - - /* update stats */ - info->icount.tx += sentl; - - /* update xmit buffer */ - info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); - - /* if there is only a few chars left in the buf, wake up the blocked - write if any */ - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - - /* find out the largest amount of consecutive bytes we want to send now */ - - c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - - /* Don't send all in one DMA transfer - divide it so we wake up - * application before all is sent - */ - - if (c >= 4*WAKEUP_CHARS) - c = c/2; - - if (c <= 0) { - /* our job here is done, don't schedule any new DMA transfer */ - info->tr_running = 0; - -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - return; - } - - /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ - /* set up the descriptor correctly for output */ - DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); - descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ - descr->sw_len = c; - descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); - descr->status = 0; - - *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* DMA is now running (hopefully) */ -} /* transmit_chars_dma */ - -static void -start_transmit(struct e100_serial *info) -{ -#if 0 - if (info->line == SERIAL_DEBUG_LINE) - printk("x\n"); -#endif - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - info->tr_running = 1; - if (info->uses_dma_out) - transmit_chars_dma(info); - else - e100_enable_serial_tx_ready_irq(info); -} /* start_transmit */ - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static int serial_fast_timer_started = 0; -static int serial_fast_timer_expired = 0; -static void flush_timeout_function(unsigned long data); -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ - unsigned long timer_flags; \ - local_irq_save(timer_flags); \ - if (fast_timers[info->line].function == NULL) { \ - serial_fast_timer_started++; \ - TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ - TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ - start_one_shot_timer(&fast_timers[info->line], \ - flush_timeout_function, \ - (unsigned long)info, \ - (usec), \ - string); \ - } \ - else { \ - TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ - } \ - local_irq_restore(timer_flags); \ -} -#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) - -#else -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) -#define START_FLUSH_FAST_TIMER(info, string) -#endif - -static struct etrax_recv_buffer * -alloc_recv_buffer(unsigned int size) -{ - struct etrax_recv_buffer *buffer; - - if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) - return NULL; - - buffer->next = NULL; - buffer->length = 0; - buffer->error = TTY_NORMAL; - - return buffer; -} - -static void -append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) -{ - unsigned long flags; - - local_irq_save(flags); - - if (!info->first_recv_buffer) - info->first_recv_buffer = buffer; - else - info->last_recv_buffer->next = buffer; - - info->last_recv_buffer = buffer; - - info->recv_cnt += buffer->length; - if (info->recv_cnt > info->max_recv_cnt) - info->max_recv_cnt = info->recv_cnt; - - local_irq_restore(flags); -} - -static int -add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) -{ - struct etrax_recv_buffer *buffer; - if (info->uses_dma_in) { - if (!(buffer = alloc_recv_buffer(4))) - return 0; - - buffer->length = 1; - buffer->error = flag; - buffer->buffer[0] = data; - - append_recv_buffer(info, buffer); - - info->icount.rx++; - } else { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, data, flag); - info->icount.rx++; - } - - return 1; -} - -static unsigned int handle_descr_data(struct e100_serial *info, - struct etrax_dma_descr *descr, - unsigned int recvl) -{ - struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; - - if (info->recv_cnt + recvl > 65536) { - printk(KERN_CRIT - "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); - return 0; - } - - buffer->length = recvl; - - if (info->errorcode == ERRCODE_SET_BREAK) - buffer->error = TTY_BREAK; - info->errorcode = 0; - - append_recv_buffer(info, buffer); - - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr->buf = virt_to_phys(buffer->buffer); - - return recvl; -} - -static unsigned int handle_all_descr_data(struct e100_serial *info) -{ - struct etrax_dma_descr *descr; - unsigned int recvl; - unsigned int ret = 0; - - while (1) - { - descr = &info->rec_descr[info->cur_rec_descr]; - - if (descr == phys_to_virt(*info->idescradr)) - break; - - if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) - info->cur_rec_descr = 0; - - /* find out how many bytes were read */ - - /* if the eop bit was not set, all data has been received */ - if (!(descr->status & d_eop)) { - recvl = descr->sw_len; - } else { - /* otherwise we find the amount of data received here */ - recvl = descr->hw_len; - } - - /* Reset the status information */ - descr->status = 0; - - DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); - if (info->port.tty->stopped) { - unsigned char *buf = phys_to_virt(descr->buf); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); - } - ); - - /* update stats */ - info->icount.rx += recvl; - - ret += handle_descr_data(info, descr, recvl); - } - - return ret; -} - -static void receive_chars_dma(struct e100_serial *info) -{ - struct tty_struct *tty; - unsigned char rstat; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - - /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - - tty = info->port.tty; - if (!tty) /* Something wrong... */ - return; - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - if (info->uses_dma_in) - e100_enable_serial_data_irq(info); -#endif - - if (info->errorcode == ERRCODE_INSERT_BREAK) - add_char_and_flag(info, '\0', TTY_BREAK); - - handle_all_descr_data(info); - - /* Read the status register to detect errors */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); - } - - if (rstat & SER_ERROR_MASK) { - /* If we got an error, we must reset it by reading the - * data_in field - */ - unsigned char data = info->ioport[REG_DATA]; - - PROCSTAT(ser_stat[info->line].errors_cnt++); - DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - - if (rstat & SER_PAR_ERR_MASK) - add_char_and_flag(info, data, TTY_PARITY); - else if (rstat & SER_OVERRUN_MASK) - add_char_and_flag(info, data, TTY_OVERRUN); - else if (rstat & SER_FRAMING_ERR_MASK) - add_char_and_flag(info, data, TTY_FRAME); - } - - START_FLUSH_FAST_TIMER(info, "receive_chars"); - - /* Restart the receiving DMA */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); -} - -static int start_recv_dma(struct e100_serial *info) -{ - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - - /* Set up the receiving descriptors */ - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr[i].ctrl = d_int; - descr[i].buf = virt_to_phys(buffer->buffer); - descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; - descr[i].hw_len = 0; - descr[i].status = 0; - descr[i].next = virt_to_phys(&descr[i+1]); - } - - /* Link the last descriptor to the first */ - descr[i-1].next = virt_to_phys(&descr[0]); - - /* Start with the first descriptor in the list */ - info->cur_rec_descr = 0; - - /* Start the DMA */ - *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* Input DMA should be running now */ - return 1; -} - -static void -start_receive(struct e100_serial *info) -{ -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - if (info->uses_dma_in) { - /* reset the input dma channel to be sure it works */ - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - start_recv_dma(info); - } -} - - -/* the bits in the MASK2 register are laid out like this: - DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR - where I is the input channel and O is the output channel for the port. - info->irq is the bit number for the DMAO_DESCR so to check the others we - shift info->irq to the left. -*/ - -/* dma output channel interrupt handler - this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or - DMA8(ser1) when they have finished a descriptor with the intr flag set. -*/ - -static irqreturn_t -tr_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? tr_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_out) - continue; - /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ - if (ireg & info->irq) { - handled = 1; - /* we can send a new dma bunch. make it so. */ - DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); - /* Read jiffies_usec first, - * we want this time to be as late as possible - */ - PROCSTAT(ser_stat[info->line].tx_dma_ints++); - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - transmit_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* tr_interrupt */ - -/* dma input channel interrupt handler */ - -static irqreturn_t -rec_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? rec_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_in) - continue; - /* check for both dma_eop and dma_descr for the input dma channel */ - if (ireg & ((info->irq << 2) | (info->irq << 3))) { - handled = 1; - /* we have received something */ - receive_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* rec_interrupt */ - -static int force_eop_if_needed(struct e100_serial *info) -{ - /* We check data_avail bit to determine if data has - * arrived since last time - */ - unsigned char rstat = info->ioport[REG_STATUS]; - - /* error or datavail? */ - if (rstat & SER_ERROR_MASK) { - /* Some error has occurred. If there has been valid data, an - * EOP interrupt will be made automatically. If no data, the - * normal ser_interrupt should be enabled and handle it. - * So do nothing! - */ - DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", - rstat | (info->line << 8)); - return 0; - } - - if (rstat & SER_DATA_AVAIL_MASK) { - /* Ok data, no error, count it */ - TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", - rstat | (info->line << 8))); - /* Read data to clear status flags */ - (void)info->ioport[REG_DATA]; - - info->forced_eop = 0; - START_FLUSH_FAST_TIMER(info, "magic"); - return 0; - } - - /* hit the timeout, force an EOP for the input - * dma channel if we haven't already - */ - if (!info->forced_eop) { - info->forced_eop = 1; - PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); - TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); - FORCE_EOP(info); - } - - return 1; -} - -static void flush_to_flip_buffer(struct e100_serial *info) -{ - struct tty_struct *tty; - struct etrax_recv_buffer *buffer; - unsigned long flags; - - local_irq_save(flags); - tty = info->port.tty; - - if (!tty) { - local_irq_restore(flags); - return; - } - - while ((buffer = info->first_recv_buffer) != NULL) { - unsigned int count = buffer->length; - - tty_insert_flip_string(tty, buffer->buffer, count); - info->recv_cnt -= count; - - if (count == buffer->length) { - info->first_recv_buffer = buffer->next; - kfree(buffer); - } else { - buffer->length -= count; - memmove(buffer->buffer, buffer->buffer + count, buffer->length); - buffer->error = TTY_NORMAL; - } - } - - if (!info->first_recv_buffer) - info->last_recv_buffer = NULL; - - local_irq_restore(flags); - - /* This includes a check for low-latency */ - tty_flip_buffer_push(tty); -} - -static void check_flush_timeout(struct e100_serial *info) -{ - /* Flip what we've got (if we can) */ - flush_to_flip_buffer(info); - - /* We might need to flip later, but not to fast - * since the system is busy processing input... */ - if (info->first_recv_buffer) - START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); - - /* Force eop last, since data might have come while we're processing - * and if we started the slow timer above, we won't start a fast - * below. - */ - force_eop_if_needed(info); -} - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static void flush_timeout_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers[info->line].function = NULL; - serial_fast_timer_expired++; - TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); - TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); - check_flush_timeout(info); -} - -#else - -/* dma fifo/buffer timeout handler - forces an end-of-packet for the dma input channel if no chars - have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. -*/ - -static struct timer_list flush_timer; - -static void -timed_flush_handler(unsigned long ptr) -{ - struct e100_serial *info; - int i; - -#ifdef CONFIG_SVINTO_SIM - return; -#endif - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (info->uses_dma_in) - check_flush_timeout(info); - } - - /* restart flush timer */ - mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); -} -#endif - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - -/* If there is an error (ie break) when the DMA is running and - * there are no bytes in the fifo the DMA is stopped and we get no - * eop interrupt. Thus we have to monitor the first bytes on a DMA - * transfer, and if it is without error we can turn the serial - * interrupts off. - */ - -/* -BREAK handling on ETRAX 100: -ETRAX will generate interrupt although there is no stop bit between the -characters. - -Depending on how long the break sequence is, the end of the breaksequence -will look differently: -| indicates start/end of a character. - -B= Break character (0x00) with framing error. -E= Error byte with parity error received after B characters. -F= "Faked" valid byte received immediately after B characters. -V= Valid byte - -1. - B BL ___________________________ V -.._|__________|__________| |valid data | - -Multiple frame errors with data == 0x00 (B), -the timing matches up "perfectly" so no extra ending char is detected. -The RXD pin is 1 in the last interrupt, in that case -we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really -know if another byte will come and this really is case 2. below -(e.g F=0xFF or 0xFE) -If RXD pin is 0 we can expect another character (see 2. below). - - -2. - - B B E or F__________________..__ V -.._|__________|__________|______ | |valid data - "valid" or - parity error - -Multiple frame errors with data == 0x00 (B), -but the part of the break trigs is interpreted as a start bit (and possibly -some 0 bits followed by a number of 1 bits and a stop bit). -Depending on parity settings etc. this last character can be either -a fake "valid" char (F) or have a parity error (E). - -If the character is valid it will be put in the buffer, -we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt -will set the flags so the tty will handle it, -if it's an error byte it will not be put in the buffer -and we set info->errorcode = ERRCODE_INSERT_BREAK. - -To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp -of the last faulty char (B) and compares it with the current time: -If the time elapsed time is less then 2*char_time_usec we will assume -it's a faked F char and not a Valid char and set -info->errorcode = ERRCODE_SET_BREAK. - -Flaws in the above solution: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -We use the timer to distinguish a F character from a V character, -if a V character is to close after the break we might make the wrong decision. - -TODO: The break will be delayed until an F or V character is received. - -*/ - -static -struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) -{ - unsigned long data_read; - struct tty_struct *tty = info->port.tty; - - if (!tty) { - printk("!NO TTY!\n"); - return info; - } - - /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); -more_data: - if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); - - if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | - IO_MASK(R_SERIAL0_READ, par_err) | - IO_MASK(R_SERIAL0_READ, overrun) )) { - /* An error */ - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - log_int_trig1_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - - - if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && - (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - unsigned char data = IO_EXTRACT(R_SERIAL0_READ, - data_in, data_read); - char flag = TTY_NORMAL; - if (info->errorcode == ERRCODE_INSERT_BREAK) { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, 0, flag); - info->icount.rx++; - } - - if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { - info->icount.parity++; - flag = TTY_PARITY; - } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { - info->icount.overrun++; - flag = TTY_OVERRUN; - } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { - info->icount.frame++; - flag = TTY_FRAME; - } - tty_insert_flip_char(tty, data, flag); - info->errorcode = 0; - } - info->break_detected_cnt = 0; - } - } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - /* No error */ - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - if (log_int_pos >= log_int_size) { - log_int_pos = 0; - } - log_int_trig0_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - tty_insert_flip_char(tty, - IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), - TTY_NORMAL); - } else { - DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); - } - - - info->icount.rx++; - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); - if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); - goto more_data; - } - - tty_flip_buffer_push(info->port.tty); - return info; -} - -static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) -{ - unsigned char rstat; - -#ifdef SERIAL_DEBUG_INTR - printk("Interrupt from serport %d\n", i); -#endif -/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ - if (!info->uses_dma_in) { - return handle_ser_rx_interrupt_no_dma(info); - } - /* DMA is used */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - - if (rstat & SER_ERROR_MASK) { - unsigned char data; - - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - /* If we got an error, we must reset it by reading the - * data_in field - */ - data = info->ioport[REG_DATA]; - DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); - if (!data && (rstat & SER_FRAMING_ERR_MASK)) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (rstat & SER_RXD_MASK) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - if (info->errorcode == ERRCODE_INSERT_BREAK) { - info->icount.brk++; - add_char_and_flag(info, '\0', TTY_BREAK); - } - - if (rstat & SER_PAR_ERR_MASK) { - info->icount.parity++; - add_char_and_flag(info, data, TTY_PARITY); - } else if (rstat & SER_OVERRUN_MASK) { - info->icount.overrun++; - add_char_and_flag(info, data, TTY_OVERRUN); - } else if (rstat & SER_FRAMING_ERR_MASK) { - info->icount.frame++; - add_char_and_flag(info, data, TTY_FRAME); - } - - info->errorcode = 0; - } - info->break_detected_cnt = 0; - DEBUG_LOG(info->line, "#iERR s d %04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - } - PROCSTAT(ser_stat[info->line].early_errors_cnt++); - } else { /* It was a valid byte, now let the DMA do the rest */ - unsigned long curr_time_u = GET_JIFFIES_USEC(); - unsigned long curr_time = jiffies; - - if (info->break_detected_cnt) { - /* Detect if this character is a new valid char or the - * last char in a break sequence: If LSBits are 0 and - * MSBits are high AND the time is close to the - * previous interrupt we should discard it. - */ - long elapsed_usec = - (curr_time - info->last_rx_active) * (1000000/HZ) + - curr_time_u - info->last_rx_active_usec; - if (elapsed_usec < 2*info->char_time_usec) { - DEBUG_LOG(info->line, "FBRK %i\n", info->line); - /* Report as BREAK (error) and let - * receive_chars_dma() handle it - */ - info->errorcode = ERRCODE_SET_BREAK; - } else { - DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); - } - DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); - } - -#ifdef SERIAL_DEBUG_INTR - printk("** OK, disabling ser_interrupts\n"); -#endif - e100_disable_serial_data_irq(info); - DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); - info->break_detected_cnt = 0; - - PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); - } - /* Restarting the DMA never hurts */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); - START_FLUSH_FAST_TIMER(info, "ser_int"); - return info; -} /* handle_ser_rx_interrupt */ - -static void handle_ser_tx_interrupt(struct e100_serial *info) -{ - unsigned long flags; - - if (info->x_char) { - unsigned char rstat; - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - - info->ioport[REG_TR_DATA] = info->x_char; - info->icount.tx++; - info->x_char = 0; - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); - return; - } - if (info->uses_dma_out) { - unsigned char rstat; - int i; - /* We only use normal tx interrupt when sending x_char */ - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - e100_disable_serial_tx_ready_irq(info); - if (info->port.tty->stopped) - rs_stop(info->port.tty); - /* Enable the DMA channel and tell it to continue */ - e100_enable_txdma_channel(info); - /* Wait 12 cycles before doing the DMA command */ - for(i = 6; i > 0; i--) - nop(); - - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); - local_irq_restore(flags); - return; - } - /* Normal char-by-char interrupt */ - if (info->xmit.head == info->xmit.tail - || info->port.tty->stopped - || info->port.tty->hw_stopped) { - DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", - info->port.tty->stopped)); - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - return; - } - DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); - /* Send a byte, rs485 timing is critical so turn of ints */ - local_irq_save(flags); - info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; - info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); - info->icount.tx++; - if (info->xmit.head == info->xmit.tail) { -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); - } else { - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - } - local_irq_restore(flags); - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - -} /* handle_ser_tx_interrupt */ - -/* result of time measurements: - * RX duration 54-60 us when doing something, otherwise 6-9 us - * ser_int duration: just sending: 8-15 us normally, up to 73 us - */ -static irqreturn_t -ser_interrupt(int irq, void *dev_id) -{ - static volatile int tx_started = 0; - struct e100_serial *info; - int i; - unsigned long flags; - unsigned long irq_mask1_rd; - unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ - int handled = 0; - static volatile unsigned long reentered_ready_mask = 0; - - local_irq_save(flags); - irq_mask1_rd = *R_IRQ_MASK1_RD; - /* First handle all rx interrupts with ints disabled */ - info = rs_table; - irq_mask1_rd &= e100_ser_int_mask; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the data irq? */ - if (irq_mask1_rd & data_mask) { - handled = 1; - handle_ser_rx_interrupt(info); - } - info += 1; - data_mask <<= 2; - } - /* Handle tx interrupts with interrupts enabled so we - * can take care of new data interrupts while transmitting - * We protect the tx part with the tx_started flag. - * We disable the tr_ready interrupts we are about to handle and - * unblock the serial interrupt so new serial interrupts may come. - * - * If we get a new interrupt: - * - it migth be due to synchronous serial ports. - * - serial irq will be blocked by general irq handler. - * - async data will be handled above (sync will be ignored). - * - tx_started flag will prevent us from trying to send again and - * we will exit fast - no need to unblock serial irq. - * - Next (sync) serial interrupt handler will be runned with - * disabled interrupt due to restore_flags() at end of function, - * so sync handler will not be preempted or reentered. - */ - if (!tx_started) { - unsigned long ready_mask; - unsigned long - tx_started = 1; - /* Only the tr_ready interrupts left */ - irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - while (irq_mask1_rd) { - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = irq_mask1_rd; - /* Unblock the serial interrupt */ - *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - - local_irq_enable(); - ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ - info = rs_table; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the ready irq? */ - if (irq_mask1_rd & ready_mask) { - handled = 1; - handle_ser_tx_interrupt(info); - } - info += 1; - ready_mask <<= 2; - } - /* handle_ser_tx_interrupt enables tr_ready interrupts */ - local_irq_disable(); - /* Handle reentered TX interrupt */ - irq_mask1_rd = reentered_ready_mask; - } - local_irq_disable(); - tx_started = 0; - } else { - unsigned long ready_mask; - ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - if (ready_mask) { - reentered_ready_mask |= ready_mask; - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = ready_mask; - DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); - } - } - - local_irq_restore(flags); - return IRQ_RETVAL(handled); -} /* ser_interrupt */ -#endif - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using rs_sched_event(), and they get done here. - */ -static void -do_softint(struct work_struct *work) -{ - struct e100_serial *info; - struct tty_struct *tty; - - info = container_of(work, struct e100_serial, work); - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -static int -startup(struct e100_serial * info) -{ - unsigned long flags; - unsigned long xmit_page; - int i; - - xmit_page = get_zeroed_page(GFP_KERNEL); - if (!xmit_page) - return -ENOMEM; - - local_irq_save(flags); - - /* if it was already initialized, skip this */ - - if (info->flags & ASYNC_INITIALIZED) { - local_irq_restore(flags); - free_page(xmit_page); - return 0; - } - - if (info->xmit.buf) - free_page(xmit_page); - else - info->xmit.buf = (unsigned char *) xmit_page; - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); -#endif - -#ifdef CONFIG_SVINTO_SIM - /* Bits and pieces collected from below. Better to have them - in one ifdef:ed clause than to mix in a lot of ifdefs, - right? */ - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = NULL; - - /* No real action in the simulator, but may set info important - to ioctl. */ - change_speed(info); -#else - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in change_speed()) - */ - - /* - * Reset the DMA channels and make sure their interrupts are cleared - */ - - if (info->dma_in_enabled) { - info->uses_dma_in = 1; - e100_enable_rxdma_channel(info); - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - /* Wait until reset cycle is complete */ - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_rxdma_channel(info); - } - - if (info->dma_out_enabled) { - info->uses_dma_out = 1; - e100_enable_txdma_channel(info); - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_txdma_channel(info); - } - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = 0; - - /* - * and set the speed and other flags of the serial port - * this will start the rx/tx as well - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_enable_serial_data_irq(info); -#endif - change_speed(info); - - /* dummy read to reset any serial errors */ - - (void)info->ioport[REG_DATA]; - - /* enable the interrupts */ - if (info->uses_dma_out) - e100_enable_txdma_irq(info); - - e100_enable_rx_irq(info); - - info->tr_running = 0; /* to be sure we don't lock up the transmitter */ - - /* setup the dma input descriptor and start dma */ - - start_receive(info); - - /* for safety, make sure the descriptors last result is 0 bytes written */ - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - - /* enable RTS/DTR last */ - - e100_rts(info, 1); - e100_dtr(info, 1); - -#endif /* CONFIG_SVINTO_SIM */ - - info->flags |= ASYNC_INITIALIZED; - - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void -shutdown(struct e100_serial * info) -{ - unsigned long flags; - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - -#ifndef CONFIG_SVINTO_SIM - /* shut down the transmitter and receiver */ - DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); - e100_disable_rx(info); - info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); - - /* disable interrupts, reset dma channels */ - if (info->uses_dma_in) { - e100_disable_rxdma_irq(info); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_in = 0; - } else { - e100_disable_serial_data_irq(info); - } - - if (info->uses_dma_out) { - e100_disable_txdma_irq(info); - info->tr_running = 0; - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_out = 0; - } else { - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - } - -#endif /* CONFIG_SVINTO_SIM */ - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); -#endif - - local_irq_save(flags); - - if (info->xmit.buf) { - free_page((unsigned long)info->xmit.buf); - info->xmit.buf = NULL; - } - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - if (descr[i].buf) { - buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; - kfree(buffer); - descr[i].buf = 0; - } - - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { - /* hang up DTR and RTS if HUPCL is enabled */ - e100_dtr(info, 0); - e100_rts(info, 0); /* could check CRTSCTS before doing this */ - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - - -/* change baud rate and other assorted parameters */ - -static void -change_speed(struct e100_serial *info) -{ - unsigned int cflag; - unsigned long xoff; - unsigned long flags; - /* first some safety checks */ - - if (!info->port.tty || !info->port.tty->termios) - return; - if (!info->ioport) - return; - - cflag = info->port.tty->termios->c_cflag; - - /* possibly, the tx/rx should be disabled first to do this safely */ - - /* change baud-rate and write it to the hardware */ - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { - /* Special baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - /* R_ALT_SER_BAUDRATE selects the source */ - DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor)); - if (info->baud_base == SERIAL_PRESCALE_BASE) { - /* 0, 2-65535 (0=65536) */ - u16 divisor = info->custom_divisor; - /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ - /* baudrate is 3.125MHz/custom_divisor */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); - alt_source = 0x11; - DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); - *R_SERIAL_PRESCALE = divisor; - info->baud = SERIAL_PRESCALE_BASE/divisor; - } -#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED - else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && - info->custom_divisor == 1) || - (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && - info->custom_divisor == 8)) { - /* ext_clk selected */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); - DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); - info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; - } -#endif - else - { - /* Bad baudbase, we don't support using timer0 - * for baudrate. - */ - printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor); - } - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; - } else { - /* Normal baudrate */ - /* Make sure we use normal baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); -#ifndef CONFIG_SVINTO_SIM - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; -#endif /* CONFIG_SVINTO_SIM */ - - info->baud = cflag_to_baud(cflag); -#ifndef CONFIG_SVINTO_SIM - info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); -#endif /* CONFIG_SVINTO_SIM */ - } - -#ifndef CONFIG_SVINTO_SIM - /* start with default settings and then fill in changes */ - local_irq_save(flags); - /* 8 bit, no/even parity */ - info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); - - /* 8 bit, no/even parity, 1 stop bit, no cts */ - info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | - IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | - IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); - - if ((cflag & CSIZE) == CS7) { - /* set 7 bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); - } - - if (cflag & CSTOPB) { - /* set 2 stop bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); - } - - if (cflag & PARENB) { - /* enable parity */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); - } - - if (cflag & CMSPAR) { - /* enable stick parity, PARODD mean Mark which matches ETRAX */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); - } - if (cflag & PARODD) { - /* set odd parity (or Mark if CMSPAR) */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); - } - - if (cflag & CRTSCTS) { - /* enable automatic CTS handling */ - DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); - } - - /* make sure the tx and rx are enabled */ - - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); - - /* actually write the control regs to the hardware */ - - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (info->port.tty->termios->c_iflag & IXON ) { - DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", - STOP_CHAR(info->port.tty))); - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); -#endif /* !CONFIG_SVINTO_SIM */ - - update_char_time(info); - -} /* change_speed */ - -/* start transmitting chars NOW */ - -static void -rs_flush_chars(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (info->tr_running || - info->xmit.head == info->xmit.tail || - tty->stopped || - tty->hw_stopped || - !info->xmit.buf) - return; - -#ifdef SERIAL_DEBUG_FLOW - printk("rs_flush_chars\n"); -#endif - - /* this protection might not exactly be necessary here */ - - local_irq_save(flags); - start_transmit(info); - local_irq_restore(flags); -} - -static int rs_raw_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - /* first some sanity checks */ - - if (!tty || !info->xmit.buf || !tmp_buf) - return 0; - -#ifdef SERIAL_DEBUG_DATA - if (info->line == SERIAL_DEBUG_LINE) - printk("rs_raw_write (%d), status %d\n", - count, info->ioport[REG_STATUS]); -#endif - -#ifdef CONFIG_SVINTO_SIM - /* Really simple. The output is here and now. */ - SIMCOUT(buf, count); - return count; -#endif - local_save_flags(flags); - DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); - DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); - - - /* The local_irq_disable/restore_flags pairs below are needed - * because the DMA interrupt handler moves the info->xmit values. - * the memcpy needs to be in the critical region unfortunately, - * because we need to read xmit values, memcpy, write xmit values - * in one atomic operation... this could perhaps be avoided by - * more clever design. - */ - local_irq_disable(); - while (count) { - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - - if (count < c) - c = count; - if (c <= 0) - break; - - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = (info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1); - buf += c; - count -= c; - ret += c; - } - local_irq_restore(flags); - - /* enable transmitter if not running, unless the tty is stopped - * this does not need IRQ protection since if tr_running == 0 - * the IRQ's are not running anyway for this port. - */ - DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); - - if (info->xmit.head != info->xmit.tail && - !tty->stopped && - !tty->hw_stopped && - !info->tr_running) { - start_transmit(info); - } - - return ret; -} /* raw_raw_write() */ - -static int -rs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ -#if defined(CONFIG_ETRAX_RS485) - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - if (info->rs485.flags & SER_RS485_ENABLED) - { - /* If we are in RS-485 mode, we need to toggle RTS and disable - * the receiver before initiating a DMA transfer - */ -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Abort any started timer */ - fast_timers_rs485[info->line].function = NULL; - del_fast_timer(&fast_timers_rs485[info->line]); -#endif - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_disable_rx(info); - e100_enable_rx_irq(info); -#endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); - } -#endif /* CONFIG_ETRAX_RS485 */ - - count = rs_raw_write(tty, buf, count); - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) - { - unsigned int val; - /* If we are in RS-485 mode the following has to be done: - * wait until DMA is ready - * wait on transmit shift register - * toggle RTS - * enable the receiver - */ - - /* Sleep until all sent */ - tty_wait_until_sent(tty, 0); -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Now sleep a little more so that shift register is empty */ - schedule_usleep(info->char_time_usec * 2); -#endif - /* wait on transmit shift register */ - do{ - get_lsr_info(info, &val); - }while (!(val & TIOCSER_TEMT)); - - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); - -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rxdma_irq(info); -#endif - } -#endif /* CONFIG_ETRAX_RS485 */ - - return count; -} /* rs_write */ - - -/* how much space is available in the xmit buffer? */ - -static int -rs_write_room(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* How many chars are in the xmit buffer? - * This does not include any chars in the transmitter FIFO. - * Use wait_until_sent for waiting for FIFO drain. - */ - -static int -rs_chars_in_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* discard everything in the xmit buffer */ - -static void -rs_flush_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; - local_irq_restore(flags); - - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - * - * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), - * but we do it in handle_ser_tx_interrupt(). - * We disable DMA channel and enable tx ready interrupt and write the - * character when possible. - */ -static void rs_send_xchar(struct tty_struct *tty, char ch) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - local_irq_save(flags); - if (info->uses_dma_out) { - /* Put the DMA on hold and disable the channel */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); - e100_disable_txdma_channel(info); - } - - /* Must make sure transmitter is not stopped before we can transmit */ - if (tty->stopped) - rs_start(tty); - - /* Enable manual transmit interrupt and send from there */ - DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); - info->x_char = ch; - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void -rs_throttle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %lu....\n", tty_name(tty, buf), - (unsigned long)tty->ldisc.chars_in_buffer(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); - - /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { - /* Turn off RTS line */ - e100_rts(info, 0); - } - if (I_IXOFF(tty)) - rs_send_xchar(tty, STOP_CHAR(tty)); - -} - -static void -rs_unthrottle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %lu....\n", tty_name(tty, buf), - (unsigned long)tty->ldisc.chars_in_buffer(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); - /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { - /* Assert RTS line */ - e100_rts(info, 1); - } - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_send_xchar(tty, START_CHAR(tty)); - } - -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int -get_serial_info(struct e100_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - /* this is all probably wrong, there are a lot of fields - * here that we don't have in e100_serial and maybe we - * should set them to something else than 0. - */ - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = (int)info->ioport; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int -set_serial_info(struct e100_serial *info, - struct serial_struct *new_info) -{ - struct serial_struct new_serial; - struct e100_serial old_info; - int retval = 0; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->custom_divisor = new_serial.custom_divisor; - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { - change_speed(info); - } else - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int -get_lsr_info(struct e100_serial * info, unsigned int *value) -{ - unsigned int result = TIOCSER_TEMT; -#ifndef CONFIG_SVINTO_SIM - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - unsigned long elapsed_usec = - (curr_time - info->last_tx_active) * 1000000/HZ + - curr_time_usec - info->last_tx_active_usec; - - if (info->xmit.head != info->xmit.tail || - elapsed_usec < 2*info->char_time_usec) { - result = 0; - } -#endif - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -#ifdef SERIAL_DEBUG_IO -struct state_str -{ - int state; - const char *str; -}; - -const struct state_str control_state_str[] = { - {TIOCM_DTR, "DTR" }, - {TIOCM_RTS, "RTS"}, - {TIOCM_ST, "ST?" }, - {TIOCM_SR, "SR?" }, - {TIOCM_CTS, "CTS" }, - {TIOCM_CD, "CD" }, - {TIOCM_RI, "RI" }, - {TIOCM_DSR, "DSR" }, - {0, NULL } -}; - -char *get_control_state_str(int MLines, char *s) -{ - int i = 0; - - s[0]='\0'; - while (control_state_str[i].str != NULL) { - if (MLines & control_state_str[i].state) { - if (s[0] != '\0') { - strcat(s, ", "); - } - strcat(s, control_state_str[i].str); - } - i++; - } - return s; -} -#endif - -static int -rs_break(struct tty_struct *tty, int break_state) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info->ioport) - return -EIO; - - local_irq_save(flags); - if (break_state == -1) { - /* Go to manual mode and set the txd pin to 0 */ - /* Clear bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl &= 0x3F; - } else { - /* Set bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl |= (0x80 | 0x40); - } - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - - if (clear & TIOCM_RTS) - e100_rts(info, 0); - if (clear & TIOCM_DTR) - e100_dtr(info, 0); - /* Handle FEMALE behaviour */ - if (clear & TIOCM_RI) - e100_ri_out(info, 0); - if (clear & TIOCM_CD) - e100_cd_out(info, 0); - - if (set & TIOCM_RTS) - e100_rts(info, 1); - if (set & TIOCM_DTR) - e100_dtr(info, 1); - /* Handle FEMALE behaviour */ - if (set & TIOCM_RI) - e100_ri_out(info, 1); - if (set & TIOCM_CD) - e100_cd_out(info, 1); - - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned int result; - unsigned long flags; - - local_irq_save(flags); - - result = - (!E100_RTS_GET(info) ? TIOCM_RTS : 0) - | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) - | (!E100_RI_GET(info) ? TIOCM_RNG : 0) - | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) - | (!E100_CD_GET(info) ? TIOCM_CAR : 0) - | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); - - local_irq_restore(flags); - -#ifdef SERIAL_DEBUG_IO - printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", - info->line, result, result); - { - char s[100]; - - get_control_state_str(result, s); - printk(KERN_DEBUG "state: %s\n", s); - } -#endif - return result; - -} - - -static int -rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - - case TIOCSERGSTRUCT: - if (copy_to_user((struct e100_serial *) arg, - info, sizeof(struct e100_serial))) - return -EFAULT; - return 0; - -#if defined(CONFIG_ETRAX_RS485) - case TIOCSERSETRS485: - { - /* In this ioctl we still use the old structure - * rs485_control for backward compatibility - * (if we use serial_rs485, then old user-level code - * wouldn't work anymore...). - * The use of this ioctl is deprecated: use TIOCSRS485 - * instead.*/ - struct rs485_control rs485ctrl; - struct serial_rs485 rs485data; - printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); - if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, - sizeof(rs485ctrl))) - return -EFAULT; - - rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; - rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); - - if (rs485ctrl.enabled) - rs485data.flags |= SER_RS485_ENABLED; - else - rs485data.flags &= ~(SER_RS485_ENABLED); - - if (rs485ctrl.rts_on_send) - rs485data.flags |= SER_RS485_RTS_ON_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); - - if (rs485ctrl.rts_after_sent) - rs485data.flags |= SER_RS485_RTS_AFTER_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCSRS485: - { - /* This is the new version of TIOCSRS485, with new - * data structure serial_rs485 */ - struct serial_rs485 rs485data; - if (copy_from_user(&rs485data, (struct rs485_control *)arg, - sizeof(rs485data))) - return -EFAULT; - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCGRS485: - { - struct serial_rs485 *rs485data = - &(((struct e100_serial *)tty->driver_data)->rs485); - /* This is the ioctl to get RS485 data from user-space */ - if (copy_to_user((struct serial_rs485 *) arg, - rs485data, - sizeof(struct serial_rs485))) - return -EFAULT; - break; - } - - case TIOCSERWRRS485: - { - struct rs485_write rs485wr; - if (copy_from_user(&rs485wr, (struct rs485_write *)arg, - sizeof(rs485wr))) - return -EFAULT; - - return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); - } -#endif - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void -rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - change_speed(info); - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_start(tty); - } - -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void -rs_close(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info) - return; - - /* interrupts are disabled for this entire function */ - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, - info->line, info->count); -#endif - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_CRIT - "rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n", - info->line, info->count); - info->count = 0; - } - if (info->count) { - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the serial receiver and the DMA receive interrupt. - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_disable_serial_data_irq(info); -#endif - -#ifndef CONFIG_SVINTO_SIM - e100_disable_rx(info); - e100_disable_rx_irq(info); - - if (info->flags & ASYNC_INITIALIZED) { - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important as we have a transmit FIFO! - */ - rs_wait_until_sent(tty, HZ); - } -#endif - - shutdown(info); - rs_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); - - /* port closed */ - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) { - info->rs485.flags &= ~(SER_RS485_ENABLED); -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 0); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); -#endif - } -#endif - - /* - * Release any allocated DMA irq's. - */ - if (info->dma_in_enabled) { - free_irq(info->dma_in_irq_nbr, info); - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - info->uses_dma_in = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - free_irq(info->dma_out_irq_nbr, info); - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - info->uses_dma_out = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_out_irq_description); -#endif - } -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - unsigned long orig_jiffies; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - long elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - - /* - * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO - * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) - */ - orig_jiffies = jiffies; - while (info->xmit.head != info->xmit.tail || /* More in send queue */ - (*info->ostatusadr & 0x007f) || /* more in FIFO */ - (elapsed_usec < 2*info->char_time_usec)) { - schedule_timeout_interruptible(1); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - curr_time = jiffies; - curr_time_usec = GET_JIFFIES_USEC(); - elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - } - set_current_state(TASK_RUNNING); -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void -rs_hangup(struct tty_struct *tty) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int -block_til_ready(struct tty_struct *tty, struct file * filp, - struct e100_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - int retval; - int do_clocal = 0, extra_count = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, - !(info->flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) { - do_clocal = 1; - } - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->count); -#endif - local_irq_save(flags); - if (!tty_hung_up_p(filp)) { - extra_count++; - info->count--; - } - local_irq_restore(flags); - info->blocked_open++; - while (1) { - local_irq_save(flags); - /* assert RTS and DTR */ - e100_rts(info, 1); - e100_dtr(info, 1); - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && do_clocal) - /* && (do_clocal || DCD_IS_ASSERTED) */ - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (extra_count) - info->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static void -deinit_port(struct e100_serial *info) -{ - if (info->dma_out_enabled) { - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - free_irq(info->dma_out_irq_nbr, info); - } - if (info->dma_in_enabled) { - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - free_irq(info->dma_in_irq_nbr, info); - } -} - -/* - * This routine is called whenever a serial port is opened. - * It performs the serial-specific initialization for the tty structure. - */ -static int -rs_open(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial *info; - int retval, line; - unsigned long page; - int allocated_resources = 0; - - /* find which port we want to open */ - line = tty->index; - - if (line < 0 || line >= NR_PORTS) - return -ENODEV; - - /* find the corresponding e100_serial struct in the table */ - info = rs_table + line; - - /* don't allow the opening of ports that are not enabled in the HW config */ - if (!info->enabled) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, - info->count); -#endif - - info->count++; - tty->driver_data = info; - info->port.tty = tty; - - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - if (!page) { - return -ENOMEM; - } - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - } - - /* - * If the port is in the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, - !(info->flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * If DMA is enabled try to allocate the irq's. - */ - if (info->count == 1) { - allocated_resources = 1; - if (info->dma_in_enabled) { - if (request_irq(info->dma_in_irq_nbr, - rec_interrupt, - info->dma_in_irq_flags, - info->dma_in_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } else if (cris_request_dma(info->dma_in_nbr, - info->dma_in_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_in_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - if (request_irq(info->dma_out_irq_nbr, - tr_interrupt, - info->dma_out_irq_flags, - info->dma_out_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } else if (cris_request_dma(info->dma_out_nbr, - info->dma_out_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_out_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_out_irq_description); -#endif - } - } - - /* - * Start up the serial port - */ - - retval = startup(info); - if (retval) { - if (allocated_resources) - deinit_port(info); - - /* FIXME Decrease count info->count here too? */ - return retval; - } - - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - if (allocated_resources) - deinit_port(info); - - return retval; - } - - if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - *tty->termios = info->normal_termios; - change_speed(info); - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open ttyS%d successful...\n", info->line); -#endif - DLOG_INT_TRIG( log_int_pos = 0); - - DFLIP( if (info->line == SERIAL_DEBUG_LINE) { - info->icount.rx = 0; - } ); - - return 0; -} - -#ifdef CONFIG_PROC_FS -/* - * /proc fs routines.... - */ - -static void seq_line_info(struct seq_file *m, struct e100_serial *info) -{ - unsigned long tmp; - - seq_printf(m, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); - - if (!info->ioport || (info->type == PORT_UNKNOWN)) { - seq_printf(m, "\n"); - return; - } - - seq_printf(m, " baud:%d", info->baud); - seq_printf(m, " tx:%lu rx:%lu", - (unsigned long)info->icount.tx, - (unsigned long)info->icount.rx); - tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) - seq_printf(m, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - - seq_printf(m, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); - -#if 1 - if (info->port.tty) { - if (info->port.tty->stopped) - seq_printf(m, " stopped:%i", - (int)info->port.tty->stopped); - if (info->port.tty->hw_stopped) - seq_printf(m, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); - } - - { - unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) - seq_printf(m, " xoff_detect:1"); - } - -#endif - - if (info->icount.frame) - seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); - - if (info->icount.parity) - seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); - - if (info->icount.brk) - seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); - - if (info->icount.overrun) - seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - if (!E100_RTS_GET(info)) - seq_puts(m, "|RTS"); - if (!E100_CTS_GET(info)) - seq_puts(m, "|CTS"); - if (!E100_DTR_GET(info)) - seq_puts(m, "|DTR"); - if (!E100_DSR_GET(info)) - seq_puts(m, "|DSR"); - if (!E100_CD_GET(info)) - seq_puts(m, "|CD"); - if (!E100_RI_GET(info)) - seq_puts(m, "|RI"); - seq_puts(m, "\n"); -} - - -static int crisv10_proc_show(struct seq_file *m, void *v) -{ - int i; - - seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - - for (i = 0; i < NR_PORTS; i++) { - if (!rs_table[i].enabled) - continue; - seq_line_info(m, &rs_table[i]); - } -#ifdef DEBUG_LOG_INCLUDED - for (i = 0; i < debug_log_pos; i++) { - seq_printf(m, "%-4i %lu.%lu ", - i, debug_log[i].time, - timer_data_to_ns(debug_log[i].timer_data)); - seq_printf(m, debug_log[i].string, debug_log[i].value); - } - seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); - debug_log_pos = 0; -#endif - return 0; -} - -static int crisv10_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, crisv10_proc_show, NULL); -} - -static const struct file_operations crisv10_proc_fops = { - .owner = THIS_MODULE, - .open = crisv10_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk(KERN_INFO - "ETRAX 100LX serial-driver %s, " - "(c) 2000-2004 Axis Communications AB\r\n", - &serial_version[11]); /* "$Revision: x.yy" */ -} - -/* rs_init inits the driver at boot (using the module_init chain) */ - -static const struct tty_operations rs_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .break_ctl = rs_break, - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, -#ifdef CONFIG_PROC_FS - .proc_fops = &crisv10_proc_fops, -#endif -}; - -static int __init rs_init(void) -{ - int i; - struct e100_serial *info; - struct tty_driver *driver = alloc_tty_driver(NR_PORTS); - - if (!driver) - return -ENOMEM; - - show_serial_version(); - - /* Setup the timed flush handler system */ - -#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) - setup_timer(&flush_timer, timed_flush_handler, 0); - mod_timer(&flush_timer, jiffies + 5); -#endif - -#if defined(CONFIG_ETRAX_RS485) -#if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, - rs485_pa_bit)) { - printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, - rs485_port_g_bit)) { - printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif -#endif - - /* Initialize the tty_driver structure */ - - driver->driver_name = "serial"; - driver->name = "ttyS"; - driver->major = TTY_MAJOR; - driver->minor_start = 64; - driver->type = TTY_DRIVER_TYPE_SERIAL; - driver->subtype = SERIAL_TYPE_NORMAL; - driver->init_termios = tty_std_termios; - driver->init_termios.c_cflag = - B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ - driver->init_termios.c_ispeed = 115200; - driver->init_termios.c_ospeed = 115200; - driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - - tty_set_operations(driver, &rs_ops); - serial_driver = driver; - if (tty_register_driver(driver)) - panic("Couldn't register serial driver\n"); - /* do some initializing for the separate ports */ - - for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { - if (info->enabled) { - if (cris_request_io_interface(info->io_if, - info->io_if_description)) { - printk(KERN_CRIT "ETRAX100LX async serial: " - "Could not allocate IO pins for " - "%s, port %d\n", - info->io_if_description, i); - info->enabled = 0; - } - } - info->uses_dma_in = 0; - info->uses_dma_out = 0; - info->line = i; - info->port.tty = NULL; - info->type = PORT_ETRAX; - info->tr_running = 0; - info->forced_eop = 0; - info->baud_base = DEF_BAUD_BASE; - info->custom_divisor = 0; - info->flags = 0; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->normal_termios = driver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->xmit.buf = NULL; - info->xmit.tail = info->xmit.head = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - info->last_tx_active_usec = 0; - info->last_tx_active = 0; - -#if defined(CONFIG_ETRAX_RS485) - /* Set sane defaults */ - info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); - info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); - info->rs485.delay_rts_before_send = 0; - info->rs485.flags &= ~(SER_RS485_ENABLED); -#endif - INIT_WORK(&info->work, do_softint); - - if (info->enabled) { - printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", - serial_driver->name, info->line, info->ioport); - } - } -#ifdef CONFIG_ETRAX_FAST_TIMER -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER - memset(fast_timers, 0, sizeof(fast_timers)); -#endif -#ifdef CONFIG_ETRAX_RS485 - memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); -#endif - fast_timer_init(); -#endif - -#ifndef CONFIG_SVINTO_SIM -#ifndef CONFIG_ETRAX_KGDB - /* Not needed in simulator. May only complicate stuff. */ - /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - - if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, - IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) - panic("%s: Failed to request irq8", __func__); - -#endif -#endif /* CONFIG_SVINTO_SIM */ - - return 0; -} - -/* this makes sure that rs_init is called during kernel boot */ - -module_init(rs_init); diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h deleted file mode 100644 index ea0beb4..0000000 --- a/drivers/serial/crisv10.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * serial.h: Arch-dep definitions for the Etrax100 serial driver. - * - * Copyright (C) 1998-2007 Axis Communications AB - */ - -#ifndef _ETRAX_SERIAL_H -#define _ETRAX_SERIAL_H - -#include -#include -#include -#include - -/* Software state per channel */ - -#ifdef __KERNEL__ -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -#define SERIAL_RECV_DESCRIPTORS 8 - -struct etrax_recv_buffer { - struct etrax_recv_buffer *next; - unsigned short length; - unsigned char error; - unsigned char pad; - - unsigned char buffer[0]; -}; - -struct e100_serial { - struct tty_port port; - int baud; - volatile u8 *ioport; /* R_SERIALx_CTRL */ - u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ - - /* Output registers */ - volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ - const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ - - /* Input registers */ - volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ - volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ - - int flags; /* defined in tty.h */ - - u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ - u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ - u8 iseteop; /* bit number for R_SET_EOP for the input dma */ - int enabled; /* Set to 1 if the port is enabled in HW config */ - - u8 dma_out_enabled; /* Set to 1 if DMA should be used */ - u8 dma_in_enabled; /* Set to 1 if DMA should be used */ - - /* end of fields defined in rs_table[] in .c-file */ - int dma_owner; - unsigned int dma_in_nbr; - unsigned int dma_out_nbr; - unsigned int dma_in_irq_nbr; - unsigned int dma_out_irq_nbr; - unsigned long dma_in_irq_flags; - unsigned long dma_out_irq_flags; - char *dma_in_irq_description; - char *dma_out_irq_description; - - enum cris_io_interface io_if; - char *io_if_description; - - u8 uses_dma_in; /* Set to 1 if DMA is used */ - u8 uses_dma_out; /* Set to 1 if DMA is used */ - u8 forced_eop; /* a fifo eop has been forced */ - int baud_base; /* For special baudrates */ - int custom_divisor; /* For special baudrates */ - struct etrax_dma_descr tr_descr; - struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; - int cur_rec_descr; - - volatile int tr_running; /* 1 if output is running */ - - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int line; - int type; /* PORT_ETRAX */ - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - struct circ_buf xmit; - struct etrax_recv_buffer *first_recv_buffer; - struct etrax_recv_buffer *last_recv_buffer; - unsigned int recv_cnt; - unsigned int max_recv_cnt; - - struct work_struct work; - struct async_icount icount; /* error-statistics etc.*/ - struct ktermios normal_termios; - struct ktermios callout_termios; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - - unsigned long char_time_usec; /* The time for 1 char, in usecs */ - unsigned long flush_time_usec; /* How often we should flush */ - unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ - unsigned long last_tx_active; /* Last tx time in jiffies */ - unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ - unsigned long last_rx_active; /* Last rx time in jiffies */ - - int break_detected_cnt; - int errorcode; - -#ifdef CONFIG_ETRAX_RS485 - struct serial_rs485 rs485; /* RS-485 support */ -#endif -}; - -/* this PORT is not in the standard serial.h. it's not actually used for - * anything since we only have one type of async serial-port anyway in this - * system. - */ - -#define PORT_ETRAX 1 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - -#endif /* __KERNEL__ */ - -#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c deleted file mode 100644 index 57421d7..0000000 --- a/drivers/serial/dz.c +++ /dev/null @@ -1,955 +0,0 @@ -/* - * dz.c: Serial port driver for DECstations equipped - * with the DZ chipset. - * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * - * Email: olivier.lebaillif@ifrsys.com - * - * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki - * - * [31-AUG-98] triemer - * Changed IRQ to use Harald's dec internals interrupts.h - * removed base_addr code - moving address assignment to setup.c - * Changed name of dz_init to rs_init to be consistent with tc code - * [13-NOV-98] triemer fixed code to receive characters - * after patches by harald to irq code. - * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout - * field from "current" - somewhere between 2.1.121 and 2.1.131 - Qua Jun 27 15:02:26 BRT 2001 - * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups - * - * Parts (C) 1999 David Airlie, airlied@linux.ie - * [07-SEP-99] Bugfixes - * - * [06-Jan-2002] Russell King - * Converted to new serial core - */ - -#undef DEBUG_DZ - -#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "dz.h" - - -MODULE_DESCRIPTION("DECstation DZ serial driver"); -MODULE_LICENSE("GPL"); - - -static char dz_name[] __initdata = "DECstation DZ serial driver version "; -static char dz_version[] __initdata = "1.04"; - -struct dz_port { - struct dz_mux *mux; - struct uart_port port; - unsigned int cflag; -}; - -struct dz_mux { - struct dz_port dport[DZ_NB_PORT]; - atomic_t map_guard; - atomic_t irq_guard; - int initialised; -}; - -static struct dz_mux dz_mux; - -static inline struct dz_port *to_dport(struct uart_port *uport) -{ - return container_of(uport, struct dz_port, port); -} - -/* - * ------------------------------------------------------------ - * dz_in () and dz_out () - * - * These routines are used to access the registers of the DZ - * chip, hiding relocation differences between implementation. - * ------------------------------------------------------------ - */ - -static u16 dz_in(struct dz_port *dport, unsigned offset) -{ - void __iomem *addr = dport->port.membase + offset; - - return readw(addr); -} - -static void dz_out(struct dz_port *dport, unsigned offset, u16 value) -{ - void __iomem *addr = dport->port.membase + offset; - - writew(value, addr); -} - -/* - * ------------------------------------------------------------ - * rs_stop () and rs_start () - * - * These routines are called before setting or resetting - * tty->stopped. They enable or disable transmitter interrupts, - * as necessary. - * ------------------------------------------------------------ - */ - -static void dz_stop_tx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - u16 tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ - tmp &= ~mask; /* clear the TX flag */ - dz_out(dport, DZ_TCR, tmp); -} - -static void dz_start_tx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - u16 tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ - tmp |= mask; /* set the TX flag */ - dz_out(dport, DZ_TCR, tmp); -} - -static void dz_stop_rx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - - dport->cflag &= ~DZ_RXENAB; - dz_out(dport, DZ_LPR, dport->cflag); -} - -static void dz_enable_ms(struct uart_port *uport) -{ - /* nothing to do */ -} - -/* - * ------------------------------------------------------------ - * - * Here start the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * dz_interrupt. They were separated out for readability's sake. - * - * Note: dz_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * dz_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * make drivers/serial/dz.s - * - * and look at the resulting assemble code in dz.s. - * - * ------------------------------------------------------------ - */ - -/* - * ------------------------------------------------------------ - * receive_char () - * - * This routine deals with inputs from any lines. - * ------------------------------------------------------------ - */ -static inline void dz_receive_chars(struct dz_mux *mux) -{ - struct uart_port *uport; - struct dz_port *dport = &mux->dport[0]; - struct tty_struct *tty = NULL; - struct uart_icount *icount; - int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; - unsigned char ch, flag; - u16 status; - int i; - - while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { - dport = &mux->dport[LINE(status)]; - uport = &dport->port; - tty = uport->state->port.tty; /* point to the proper dev */ - - ch = UCHAR(status); /* grab the char */ - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { - - /* - * There is no separate BREAK status bit, so treat - * null characters with framing errors as BREAKs; - * normally, otherwise. For this move the Framing - * Error bit to a simulated BREAK bit. - */ - if (!ch) { - status |= (status & DZ_FERR) >> - (ffs(DZ_FERR) - ffs(DZ_BREAK)); - status &= ~DZ_FERR; - } - - /* Handle SysRq/SAK & keep track of the statistics. */ - if (status & DZ_BREAK) { - icount->brk++; - if (uart_handle_break(uport)) - continue; - } else if (status & DZ_FERR) - icount->frame++; - else if (status & DZ_PERR) - icount->parity++; - if (status & DZ_OERR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & DZ_BREAK) - flag = TTY_BREAK; - else if (status & DZ_FERR) - flag = TTY_FRAME; - else if (status & DZ_PERR) - flag = TTY_PARITY; - - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, DZ_OERR, ch, flag); - lines_rx[LINE(status)] = 1; - } - for (i = 0; i < DZ_NB_PORT; i++) - if (lines_rx[i]) - tty_flip_buffer_push(mux->dport[i].port.state->port.tty); -} - -/* - * ------------------------------------------------------------ - * transmit_char () - * - * This routine deals with outputs to any lines. - * ------------------------------------------------------------ - */ -static inline void dz_transmit_chars(struct dz_mux *mux) -{ - struct dz_port *dport = &mux->dport[0]; - struct circ_buf *xmit; - unsigned char tmp; - u16 status; - - status = dz_in(dport, DZ_CSR); - dport = &mux->dport[LINE(status)]; - xmit = &dport->port.state->xmit; - - if (dport->port.x_char) { /* XON/XOFF chars */ - dz_out(dport, DZ_TDR, dport->port.x_char); - dport->port.icount.tx++; - dport->port.x_char = 0; - return; - } - /* If nothing to do or stopped or hardware stopped. */ - if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { - spin_lock(&dport->port.lock); - dz_stop_tx(&dport->port); - spin_unlock(&dport->port.lock); - return; - } - - /* - * If something to do... (remember the dz has no output fifo, - * so we go one char at a time) :-< - */ - tmp = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); - dz_out(dport, DZ_TDR, tmp); - dport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) - uart_write_wakeup(&dport->port); - - /* Are we are done. */ - if (uart_circ_empty(xmit)) { - spin_lock(&dport->port.lock); - dz_stop_tx(&dport->port); - spin_unlock(&dport->port.lock); - } -} - -/* - * ------------------------------------------------------------ - * check_modem_status() - * - * DS 3100 & 5100: Only valid for the MODEM line, duh! - * DS 5000/200: Valid for the MODEM and PRINTER line. - * ------------------------------------------------------------ - */ -static inline void check_modem_status(struct dz_port *dport) -{ - /* - * FIXME: - * 1. No status change interrupt; use a timer. - * 2. Handle the 3100/5000 as appropriate. --macro - */ - u16 status; - - /* If not the modem line just return. */ - if (dport->port.line != DZ_MODEM) - return; - - status = dz_in(dport, DZ_MSR); - - /* it's easy, since DSR2 is the only bit in the register */ - if (status) - dport->port.icount.dsr++; -} - -/* - * ------------------------------------------------------------ - * dz_interrupt () - * - * this is the main interrupt routine for the DZ chip. - * It deals with the multiple ports. - * ------------------------------------------------------------ - */ -static irqreturn_t dz_interrupt(int irq, void *dev_id) -{ - struct dz_mux *mux = dev_id; - struct dz_port *dport = &mux->dport[0]; - u16 status; - - /* get the reason why we just got an irq */ - status = dz_in(dport, DZ_CSR); - - if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) - dz_receive_chars(mux); - - if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) - dz_transmit_chars(mux); - - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the DZ interrupt routines. - * ------------------------------------------------------------------- - */ - -static unsigned int dz_get_mctrl(struct uart_port *uport) -{ - /* - * FIXME: Handle the 3100/5000 as appropriate. --macro - */ - struct dz_port *dport = to_dport(uport); - unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; - - if (dport->port.line == DZ_MODEM) { - if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) - mctrl &= ~TIOCM_DSR; - } - - return mctrl; -} - -static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - /* - * FIXME: Handle the 3100/5000 as appropriate. --macro - */ - struct dz_port *dport = to_dport(uport); - u16 tmp; - - if (dport->port.line == DZ_MODEM) { - tmp = dz_in(dport, DZ_TCR); - if (mctrl & TIOCM_DTR) - tmp &= ~DZ_MODEM_DTR; - else - tmp |= DZ_MODEM_DTR; - dz_out(dport, DZ_TCR, tmp); - } -} - -/* - * ------------------------------------------------------------------- - * startup () - * - * various initialization tasks - * ------------------------------------------------------------------- - */ -static int dz_startup(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - struct dz_mux *mux = dport->mux; - unsigned long flags; - int irq_guard; - int ret; - u16 tmp; - - irq_guard = atomic_add_return(1, &mux->irq_guard); - if (irq_guard != 1) - return 0; - - ret = request_irq(dport->port.irq, dz_interrupt, - IRQF_SHARED, "dz", mux); - if (ret) { - atomic_add(-1, &mux->irq_guard); - printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); - return ret; - } - - spin_lock_irqsave(&dport->port.lock, flags); - - /* Enable interrupts. */ - tmp = dz_in(dport, DZ_CSR); - tmp |= DZ_RIE | DZ_TIE; - dz_out(dport, DZ_CSR, tmp); - - spin_unlock_irqrestore(&dport->port.lock, flags); - - return 0; -} - -/* - * ------------------------------------------------------------------- - * shutdown () - * - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - * ------------------------------------------------------------------- - */ -static void dz_shutdown(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - struct dz_mux *mux = dport->mux; - unsigned long flags; - int irq_guard; - u16 tmp; - - spin_lock_irqsave(&dport->port.lock, flags); - dz_stop_tx(&dport->port); - spin_unlock_irqrestore(&dport->port.lock, flags); - - irq_guard = atomic_add_return(-1, &mux->irq_guard); - if (!irq_guard) { - /* Disable interrupts. */ - tmp = dz_in(dport, DZ_CSR); - tmp &= ~(DZ_RIE | DZ_TIE); - dz_out(dport, DZ_CSR, tmp); - - free_irq(dport->port.irq, mux); - } -} - -/* - * ------------------------------------------------------------------- - * dz_tx_empty() -- get the transmitter empty status - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - * ------------------------------------------------------------------- - */ -static unsigned int dz_tx_empty(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - unsigned short tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); - tmp &= mask; - - return tmp ? 0 : TIOCSER_TEMT; -} - -static void dz_break_ctl(struct uart_port *uport, int break_state) -{ - /* - * FIXME: Can't access BREAK bits in TDR easily; - * reuse the code for polled TX. --macro - */ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned short tmp, mask = 1 << dport->port.line; - - spin_lock_irqsave(&uport->lock, flags); - tmp = dz_in(dport, DZ_TCR); - if (break_state) - tmp |= mask; - else - tmp &= ~mask; - dz_out(dport, DZ_TCR, tmp); - spin_unlock_irqrestore(&uport->lock, flags); -} - -static int dz_encode_baud_rate(unsigned int baud) -{ - switch (baud) { - case 50: - return DZ_B50; - case 75: - return DZ_B75; - case 110: - return DZ_B110; - case 134: - return DZ_B134; - case 150: - return DZ_B150; - case 300: - return DZ_B300; - case 600: - return DZ_B600; - case 1200: - return DZ_B1200; - case 1800: - return DZ_B1800; - case 2000: - return DZ_B2000; - case 2400: - return DZ_B2400; - case 3600: - return DZ_B3600; - case 4800: - return DZ_B4800; - case 7200: - return DZ_B7200; - case 9600: - return DZ_B9600; - default: - return -1; - } -} - - -static void dz_reset(struct dz_port *dport) -{ - struct dz_mux *mux = dport->mux; - - if (mux->initialised) - return; - - dz_out(dport, DZ_CSR, DZ_CLR); - while (dz_in(dport, DZ_CSR) & DZ_CLR); - iob(); - - /* Enable scanning. */ - dz_out(dport, DZ_CSR, DZ_MSE); - - mux->initialised = 1; -} - -static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned int cflag, baud; - int bflag; - - cflag = dport->port.line; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cflag |= DZ_CS5; - break; - case CS6: - cflag |= DZ_CS6; - break; - case CS7: - cflag |= DZ_CS7; - break; - case CS8: - default: - cflag |= DZ_CS8; - } - - if (termios->c_cflag & CSTOPB) - cflag |= DZ_CSTOPB; - if (termios->c_cflag & PARENB) - cflag |= DZ_PARENB; - if (termios->c_cflag & PARODD) - cflag |= DZ_PARODD; - - baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); - bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Try to keep unchanged. */ - baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); - bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Resort to 9600. */ - baud = 9600; - bflag = DZ_B9600; - } - tty_termios_encode_baud_rate(termios, baud, baud); - } - cflag |= bflag; - - if (termios->c_cflag & CREAD) - cflag |= DZ_RXENAB; - - spin_lock_irqsave(&dport->port.lock, flags); - - uart_update_timeout(uport, termios->c_cflag, baud); - - dz_out(dport, DZ_LPR, cflag); - dport->cflag = cflag; - - /* setup accept flag */ - dport->port.read_status_mask = DZ_OERR; - if (termios->c_iflag & INPCK) - dport->port.read_status_mask |= DZ_FERR | DZ_PERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - dport->port.read_status_mask |= DZ_BREAK; - - /* characters to ignore */ - uport->ignore_status_mask = 0; - if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) - dport->port.ignore_status_mask |= DZ_OERR; - if (termios->c_iflag & IGNPAR) - dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; - if (termios->c_iflag & IGNBRK) - dport->port.ignore_status_mask |= DZ_BREAK; - - spin_unlock_irqrestore(&dport->port.lock, flags); -} - -/* - * Hack alert! - * Required solely so that the initial PROM-based console - * works undisturbed in parallel with this one. - */ -static void dz_pm(struct uart_port *uport, unsigned int state, - unsigned int oldstate) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - - spin_lock_irqsave(&dport->port.lock, flags); - if (state < 3) - dz_start_tx(&dport->port); - else - dz_stop_tx(&dport->port); - spin_unlock_irqrestore(&dport->port.lock, flags); -} - - -static const char *dz_type(struct uart_port *uport) -{ - return "DZ"; -} - -static void dz_release_port(struct uart_port *uport) -{ - struct dz_mux *mux = to_dport(uport)->mux; - int map_guard; - - iounmap(uport->membase); - uport->membase = NULL; - - map_guard = atomic_add_return(-1, &mux->map_guard); - if (!map_guard) - release_mem_region(uport->mapbase, dec_kn_slot_size); -} - -static int dz_map_port(struct uart_port *uport) -{ - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - dec_kn_slot_size); - if (!uport->membase) { - printk(KERN_ERR "dz: Cannot map MMIO\n"); - return -ENOMEM; - } - return 0; -} - -static int dz_request_port(struct uart_port *uport) -{ - struct dz_mux *mux = to_dport(uport)->mux; - int map_guard; - int ret; - - map_guard = atomic_add_return(1, &mux->map_guard); - if (map_guard == 1) { - if (!request_mem_region(uport->mapbase, dec_kn_slot_size, - "dz")) { - atomic_add(-1, &mux->map_guard); - printk(KERN_ERR - "dz: Unable to reserve MMIO resource\n"); - return -EBUSY; - } - } - ret = dz_map_port(uport); - if (ret) { - map_guard = atomic_add_return(-1, &mux->map_guard); - if (!map_guard) - release_mem_region(uport->mapbase, dec_kn_slot_size); - return ret; - } - return 0; -} - -static void dz_config_port(struct uart_port *uport, int flags) -{ - struct dz_port *dport = to_dport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (dz_request_port(uport)) - return; - - uport->type = PORT_DZ; - - dz_reset(dport); - } -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - */ -static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - return ret; -} - -static struct uart_ops dz_ops = { - .tx_empty = dz_tx_empty, - .get_mctrl = dz_get_mctrl, - .set_mctrl = dz_set_mctrl, - .stop_tx = dz_stop_tx, - .start_tx = dz_start_tx, - .stop_rx = dz_stop_rx, - .enable_ms = dz_enable_ms, - .break_ctl = dz_break_ctl, - .startup = dz_startup, - .shutdown = dz_shutdown, - .set_termios = dz_set_termios, - .pm = dz_pm, - .type = dz_type, - .release_port = dz_release_port, - .request_port = dz_request_port, - .config_port = dz_config_port, - .verify_port = dz_verify_port, -}; - -static void __init dz_init_ports(void) -{ - static int first = 1; - unsigned long base; - int line; - - if (!first) - return; - first = 0; - - if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) - base = dec_kn_slot_base + KN01_DZ11; - else - base = dec_kn_slot_base + KN02_DZ11; - - for (line = 0; line < DZ_NB_PORT; line++) { - struct dz_port *dport = &dz_mux.dport[line]; - struct uart_port *uport = &dport->port; - - dport->mux = &dz_mux; - - uport->irq = dec_interrupt[DEC_IRQ_DZ11]; - uport->fifosize = 1; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &dz_ops; - uport->line = line; - uport->mapbase = base; - } -} - -#ifdef CONFIG_SERIAL_DZ_CONSOLE -/* - * ------------------------------------------------------------------- - * dz_console_putchar() -- transmit a character - * - * Polled transmission. This is tricky. We need to mask transmit - * interrupts so that they do not interfere, enable the transmitter - * for the line requested and then wait till the transmit scanner - * requests data for this line. But it may request data for another - * line first, in which case we have to disable its transmitter and - * repeat waiting till our line pops up. Only then the character may - * be transmitted. Finally, the state of the transmitter mask is - * restored. Welcome to the world of PDP-11! - * ------------------------------------------------------------------- - */ -static void dz_console_putchar(struct uart_port *uport, int ch) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned short csr, tcr, trdy, mask; - int loops = 10000; - - spin_lock_irqsave(&dport->port.lock, flags); - csr = dz_in(dport, DZ_CSR); - dz_out(dport, DZ_CSR, csr & ~DZ_TIE); - tcr = dz_in(dport, DZ_TCR); - tcr |= 1 << dport->port.line; - mask = tcr; - dz_out(dport, DZ_TCR, mask); - iob(); - spin_unlock_irqrestore(&dport->port.lock, flags); - - do { - trdy = dz_in(dport, DZ_CSR); - if (!(trdy & DZ_TRDY)) - continue; - trdy = (trdy & DZ_TLINE) >> 8; - if (trdy == dport->port.line) - break; - mask &= ~(1 << trdy); - dz_out(dport, DZ_TCR, mask); - iob(); - udelay(2); - } while (--loops); - - if (loops) /* Cannot send otherwise. */ - dz_out(dport, DZ_TDR, ch); - - dz_out(dport, DZ_TCR, tcr); - dz_out(dport, DZ_CSR, csr); -} - -/* - * ------------------------------------------------------------------- - * dz_console_print () - * - * dz_console_print is registered for printk. - * The console must be locked when we get here. - * ------------------------------------------------------------------- - */ -static void dz_console_print(struct console *co, - const char *str, - unsigned int count) -{ - struct dz_port *dport = &dz_mux.dport[co->index]; -#ifdef DEBUG_DZ - prom_printf((char *) str); -#endif - uart_console_write(&dport->port, str, count, dz_console_putchar); -} - -static int __init dz_console_setup(struct console *co, char *options) -{ - struct dz_port *dport = &dz_mux.dport[co->index]; - struct uart_port *uport = &dport->port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - ret = dz_map_port(uport); - if (ret) - return ret; - - spin_lock_init(&dport->port.lock); /* For dz_pm(). */ - - dz_reset(dport); - dz_pm(uport, 0, -1); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&dport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver dz_reg; -static struct console dz_console = { - .name = "ttyS", - .write = dz_console_print, - .device = uart_console_device, - .setup = dz_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &dz_reg, -}; - -static int __init dz_serial_console_init(void) -{ - if (!IOASIC) { - dz_init_ports(); - register_console(&dz_console); - return 0; - } else - return -ENXIO; -} - -console_initcall(dz_serial_console_init); - -#define SERIAL_DZ_CONSOLE &dz_console -#else -#define SERIAL_DZ_CONSOLE NULL -#endif /* CONFIG_SERIAL_DZ_CONSOLE */ - -static struct uart_driver dz_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = DZ_NB_PORT, - .cons = SERIAL_DZ_CONSOLE, -}; - -static int __init dz_init(void) -{ - int ret, i; - - if (IOASIC) - return -ENXIO; - - printk("%s%s\n", dz_name, dz_version); - - dz_init_ports(); - - ret = uart_register_driver(&dz_reg); - if (ret) - return ret; - - for (i = 0; i < DZ_NB_PORT; i++) - uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); - - return 0; -} - -module_init(dz_init); diff --git a/drivers/serial/dz.h b/drivers/serial/dz.h deleted file mode 100644 index faf169e..0000000 --- a/drivers/serial/dz.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * dz.h: Serial port driver for DECstations equipped - * with the DZ chipset. - * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * - * Email: olivier.lebaillif@ifrsys.com - * - * Copyright (C) 2004, 2006 Maciej W. Rozycki - */ -#ifndef DZ_SERIAL_H -#define DZ_SERIAL_H - -/* - * Definitions for the Control and Status Register. - */ -#define DZ_TRDY 0x8000 /* Transmitter empty */ -#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ -#define DZ_TLINE 0x0300 /* Transmitter Line Number */ -#define DZ_RDONE 0x0080 /* Receiver data ready */ -#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ -#define DZ_MSE 0x0020 /* Master Scan Enable */ -#define DZ_CLR 0x0010 /* Master reset */ -#define DZ_MAINT 0x0008 /* Loop Back Mode */ - -/* - * Definitions for the Receiver Buffer Register. - */ -#define DZ_RBUF_MASK 0x00FF /* Data Mask */ -#define DZ_LINE_MASK 0x0300 /* Line Mask */ -#define DZ_DVAL 0x8000 /* Valid Data indicator */ -#define DZ_OERR 0x4000 /* Overrun error indicator */ -#define DZ_FERR 0x2000 /* Frame error indicator */ -#define DZ_PERR 0x1000 /* Parity error indicator */ - -#define DZ_BREAK 0x0800 /* BREAK event software flag */ - -#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number - from the input buffer */ -#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) - -/* - * Definitions for the Transmit Control Register. - */ -#define DZ_LINE_KEYBOARD 0x0001 -#define DZ_LINE_MOUSE 0x0002 -#define DZ_LINE_MODEM 0x0004 -#define DZ_LINE_PRINTER 0x0008 - -#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ -#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ -#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ -#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ -#define DZ_LNENB 0x000f /* Transmitter Line Enable */ - -/* - * Definitions for the Modem Status Register. - */ -#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ -#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ -#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ -#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ -#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ -#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ -#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ -#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ - -/* - * Definitions for the Transmit Data Register. - */ -#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ -#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ -#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ -#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ - -/* - * Definitions for the Line Parameter Register. - */ -#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ -#define DZ_MOUSE 0x0001 /* line 1 = mouse */ -#define DZ_MODEM 0x0002 /* line 2 = modem */ -#define DZ_PRINTER 0x0003 /* line 3 = printer */ - -#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ -#define DZ_CS5 0x0000 /* 5 bits per byte */ -#define DZ_CS6 0x0008 /* 6 bits per byte */ -#define DZ_CS7 0x0010 /* 7 bits per byte */ -#define DZ_CS8 0x0018 /* 8 bits per byte */ - -#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ - -#define DZ_PARENB 0x0040 /* Parity enable */ -#define DZ_PARODD 0x0080 /* Odd parity instead of even */ - -#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ -#define DZ_B50 0x0000 -#define DZ_B75 0x0100 -#define DZ_B110 0x0200 -#define DZ_B134 0x0300 -#define DZ_B150 0x0400 -#define DZ_B300 0x0500 -#define DZ_B600 0x0600 -#define DZ_B1200 0x0700 -#define DZ_B1800 0x0800 -#define DZ_B2000 0x0900 -#define DZ_B2400 0x0A00 -#define DZ_B3600 0x0B00 -#define DZ_B4800 0x0C00 -#define DZ_B7200 0x0D00 -#define DZ_B9600 0x0E00 - -#define DZ_RXENAB 0x1000 /* Receiver Enable */ - -/* - * Addresses for the DZ registers - */ -#define DZ_CSR 0x00 /* Control and Status Register */ -#define DZ_RBUF 0x08 /* Receive Buffer */ -#define DZ_LPR 0x08 /* Line Parameters Register */ -#define DZ_TCR 0x10 /* Transmitter Control Register */ -#define DZ_MSR 0x18 /* Modem Status Register */ -#define DZ_TDR 0x18 /* Transmit Data Register */ - -#define DZ_NB_PORT 4 - -#define DZ_XMIT_SIZE 4096 /* buffer size */ -#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 - -#endif /* DZ_SERIAL_H */ diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c deleted file mode 100644 index 53a4682..0000000 --- a/drivers/serial/icom.c +++ /dev/null @@ -1,1658 +0,0 @@ -/* - * icom.c - * - * Copyright (C) 2001 IBM Corporation. All rights reserved. - * - * Serial device driver. - * - * Based on code from serial.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#define SERIAL_DO_RESTART -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "icom.h" - -/*#define ICOM_TRACE enable port trace capabilities */ - -#define ICOM_DRIVER_NAME "icom" -#define ICOM_VERSION_STR "1.3.1" -#define NR_PORTS 128 -#define ICOM_PORT ((struct icom_port *)port) -#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) - -static const struct pci_device_id icom_pci_table[] = { - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = ADAPTER_V1, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, - .driver_data = ADAPTER_V2, - }, - {} -}; - -struct lookup_proc_table start_proc[4] = { - {NULL, ICOM_CONTROL_START_A}, - {NULL, ICOM_CONTROL_START_B}, - {NULL, ICOM_CONTROL_START_C}, - {NULL, ICOM_CONTROL_START_D} -}; - - -struct lookup_proc_table stop_proc[4] = { - {NULL, ICOM_CONTROL_STOP_A}, - {NULL, ICOM_CONTROL_STOP_B}, - {NULL, ICOM_CONTROL_STOP_C}, - {NULL, ICOM_CONTROL_STOP_D} -}; - -struct lookup_int_table int_mask_tbl[4] = { - {NULL, ICOM_INT_MASK_PRC_A}, - {NULL, ICOM_INT_MASK_PRC_B}, - {NULL, ICOM_INT_MASK_PRC_C}, - {NULL, ICOM_INT_MASK_PRC_D}, -}; - - -MODULE_DEVICE_TABLE(pci, icom_pci_table); - -static LIST_HEAD(icom_adapter_head); - -/* spinlock for adapter initialization and changing adapter operations */ -static spinlock_t icom_lock; - -#ifdef ICOM_TRACE -static inline void trace(struct icom_port *icom_port, char *trace_pt, - unsigned long trace_data) -{ - dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", - icom_port->port, trace_pt, trace_data); -} -#else -static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; -#endif -static void icom_kref_release(struct kref *kref); - -static void free_port_memory(struct icom_port *icom_port) -{ - struct pci_dev *dev = icom_port->adapter->pci_dev; - - trace(icom_port, "RET_PORT_MEM", 0); - if (icom_port->recv_buf) { - pci_free_consistent(dev, 4096, icom_port->recv_buf, - icom_port->recv_buf_pci); - icom_port->recv_buf = NULL; - } - if (icom_port->xmit_buf) { - pci_free_consistent(dev, 4096, icom_port->xmit_buf, - icom_port->xmit_buf_pci); - icom_port->xmit_buf = NULL; - } - if (icom_port->statStg) { - pci_free_consistent(dev, 4096, icom_port->statStg, - icom_port->statStg_pci); - icom_port->statStg = NULL; - } - - if (icom_port->xmitRestart) { - pci_free_consistent(dev, 4096, icom_port->xmitRestart, - icom_port->xmitRestart_pci); - icom_port->xmitRestart = NULL; - } -} - -static int __devinit get_port_memory(struct icom_port *icom_port) -{ - int index; - unsigned long stgAddr; - unsigned long startStgAddr; - unsigned long offset; - struct pci_dev *dev = icom_port->adapter->pci_dev; - - icom_port->xmit_buf = - pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); - if (!icom_port->xmit_buf) { - dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); - return -ENOMEM; - } - - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->xmit_buf); - - icom_port->recv_buf = - pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); - if (!icom_port->recv_buf) { - dev_err(&dev->dev, "Can not allocate Receive buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->recv_buf); - - icom_port->statStg = - pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); - if (!icom_port->statStg) { - dev_err(&dev->dev, "Can not allocate Status buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->statStg); - - icom_port->xmitRestart = - pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); - if (!icom_port->xmitRestart) { - dev_err(&dev->dev, - "Can not allocate xmit Restart buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - - memset(icom_port->statStg, 0, 4096); - - /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that - indicates that frames are to be transmitted - */ - - stgAddr = (unsigned long) icom_port->statStg; - for (index = 0; index < NUM_XBUFFS; index++) { - trace(icom_port, "FOD_ADDR", stgAddr); - stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); - if (index < (NUM_XBUFFS - 1)) { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); - trace(icom_port, "FOD_ADDR", stgAddr); - trace(icom_port, "FOD_XBUFF", - (unsigned long) icom_port->xmit_buf); - icom_port->statStg->xmit[index].leBuffer = - cpu_to_le32(icom_port->xmit_buf_pci); - } else if (index == (NUM_XBUFFS - 1)) { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); - trace(icom_port, "FOD_XBUFF", - (unsigned long) icom_port->xmit_buf); - icom_port->statStg->xmit[index].leBuffer = - cpu_to_le32(icom_port->xmit_buf_pci); - } else { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - } - } - /* FIDs */ - startStgAddr = stgAddr; - - /* fill in every entry, even if no buffer */ - for (index = 0; index < NUM_RBUFFS; index++) { - trace(icom_port, "FID_ADDR", stgAddr); - stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); - icom_port->statStg->rcv[index].leLength = 0; - icom_port->statStg->rcv[index].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - if (index < (NUM_RBUFFS - 1) ) { - offset = stgAddr - (unsigned long) icom_port->statStg; - icom_port->statStg->rcv[index].leNext = - cpu_to_le32(icom_port-> statStg_pci + offset); - trace(icom_port, "FID_RBUFF", - (unsigned long) icom_port->recv_buf); - icom_port->statStg->rcv[index].leBuffer = - cpu_to_le32(icom_port->recv_buf_pci); - } else if (index == (NUM_RBUFFS -1) ) { - offset = startStgAddr - (unsigned long) icom_port->statStg; - icom_port->statStg->rcv[index].leNext = - cpu_to_le32(icom_port-> statStg_pci + offset); - trace(icom_port, "FID_RBUFF", - (unsigned long) icom_port->recv_buf + 2048); - icom_port->statStg->rcv[index].leBuffer = - cpu_to_le32(icom_port->recv_buf_pci + 2048); - } else { - icom_port->statStg->rcv[index].leNext = 0; - icom_port->statStg->rcv[index].leBuffer = 0; - } - } - - return 0; -} - -static void stop_processor(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - - port = icom_port->port; - if (port == 0 || port == 1) - stop_proc[port].global_control_reg = &icom_port->global_reg->control; - else - stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; - - - if (port < 4) { - temp = readl(stop_proc[port].global_control_reg); - temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; - writel(temp, stop_proc[port].global_control_reg); - - /* write flush */ - readl(stop_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); -} - -static void start_processor(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - - port = icom_port->port; - if (port == 0 || port == 1) - start_proc[port].global_control_reg = &icom_port->global_reg->control; - else - start_proc[port].global_control_reg = &icom_port->global_reg->control_2; - if (port < 4) { - temp = readl(start_proc[port].global_control_reg); - temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; - writel(temp, start_proc[port].global_control_reg); - - /* write flush */ - readl(start_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); -} - -static void load_code(struct icom_port *icom_port) -{ - const struct firmware *fw; - char __iomem *iram_ptr; - int index; - int status = 0; - void __iomem *dram_ptr = icom_port->dram; - dma_addr_t temp_pci; - unsigned char *new_page = NULL; - unsigned char cable_id = NO_CABLE; - struct pci_dev *dev = icom_port->adapter->pci_dev; - - /* Clear out any pending interrupts */ - writew(0x3FFF, icom_port->int_reg); - - trace(icom_port, "CLEAR_INTERRUPTS", 0); - - /* Stop processor */ - stop_processor(icom_port); - - /* Zero out DRAM */ - memset_io(dram_ptr, 0, 512); - - /* Load Call Setup into Adapter */ - if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_DCE_IRAM_OFFSET) { - dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; - for (index = 0; index < fw->size; index++) - writeb(fw->data[index], &iram_ptr[index]); - - release_firmware(fw); - - /* Load Resident DCE portion of Adapter */ - if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_IRAM_SIZE) { - dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; - for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) - writeb(fw->data[index], &iram_ptr[index]); - - release_firmware(fw); - - /* Set Hardware level */ - if (icom_port->adapter->version == ADAPTER_V2) - writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); - - /* Start the processor in Adapter */ - start_processor(icom_port); - - writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), - &(icom_port->dram->HDLCConfigReg)); - writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ - writeb(0x00, &(icom_port->dram->CmdReg)); - writeb(0x10, &(icom_port->dram->async_config3)); - writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | - ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); - - /*Set up data in icom DRAM to indicate where personality - *code is located and its length. - */ - new_page = pci_alloc_consistent(dev, 4096, &temp_pci); - - if (!new_page) { - dev_err(&dev->dev, "Can not allocate DMA buffer\n"); - status = -1; - goto load_code_exit; - } - - if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_DCE_IRAM_OFFSET) { - dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - for (index = 0; index < fw->size; index++) - new_page[index] = fw->data[index]; - - release_firmware(fw); - - writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); - writel(temp_pci, &icom_port->dram->mac_load_addr); - - /*Setting the syncReg to 0x80 causes adapter to start downloading - the personality code into adapter instruction RAM. - Once code is loaded, it will begin executing and, based on - information provided above, will start DMAing data from - shared memory to adapter DRAM. - */ - /* the wait loop below verifies this write operation has been done - and processed - */ - writeb(START_DOWNLOAD, &icom_port->dram->sync); - - /* Wait max 1 Sec for data download and processor to start */ - for (index = 0; index < 10; index++) { - msleep(100); - if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) - break; - } - - if (index == 10) - status = -1; - - /* - * check Cable ID - */ - cable_id = readb(&icom_port->dram->cable_id); - - if (cable_id & ICOM_CABLE_ID_VALID) { - /* Get cable ID into the lower 4 bits (standard form) */ - cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; - icom_port->cable_id = cable_id; - } else { - dev_err(&dev->dev,"Invalid or no cable attached\n"); - icom_port->cable_id = NO_CABLE; - } - - load_code_exit: - - if (status != 0) { - /* Clear out any pending interrupts */ - writew(0x3FFF, icom_port->int_reg); - - /* Turn off port */ - writeb(ICOM_DISABLE, &(icom_port->dram->disable)); - - /* Stop processor */ - stop_processor(icom_port); - - dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); - } - - if (new_page != NULL) - pci_free_consistent(dev, 4096, new_page, temp_pci); -} - -static int startup(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned char cable_id, raw_cable_id; - unsigned long flags; - int port; - - trace(icom_port, "STARTUP", 0); - - if (!icom_port->dram) { - /* should NEVER be NULL */ - dev_err(&icom_port->adapter->pci_dev->dev, - "Unusable Port, port configuration missing\n"); - return -ENODEV; - } - - /* - * check Cable ID - */ - raw_cable_id = readb(&icom_port->dram->cable_id); - trace(icom_port, "CABLE_ID", raw_cable_id); - - /* Get cable ID into the lower 4 bits (standard form) */ - cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; - - /* Check for valid Cable ID */ - if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || - (cable_id != icom_port->cable_id)) { - - /* reload adapter code, pick up any potential changes in cable id */ - load_code(icom_port); - - /* still no sign of cable, error out */ - raw_cable_id = readb(&icom_port->dram->cable_id); - cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; - if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || - (icom_port->cable_id == NO_CABLE)) - return -EIO; - } - - /* - * Finally, clear and enable interrupts - */ - spin_lock_irqsave(&icom_lock, flags); - port = icom_port->port; - if (port == 0 || port == 1) - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; - else - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; - - if (port == 0 || port == 2) - writew(0x00FF, icom_port->int_reg); - else - writew(0x3F00, icom_port->int_reg); - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); - return 0; -} - -static void shutdown(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned char cmdReg; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - trace(icom_port, "SHUTDOWN", 0); - - /* - * disable all interrupts - */ - port = icom_port->port; - if (port == 0 || port == 1) - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; - else - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; - - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - spin_unlock_irqrestore(&icom_lock, flags); - - /* - * disable break condition - */ - cmdReg = readb(&icom_port->dram->CmdReg); - if (cmdReg & CMD_SND_BREAK) { - writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); - } -} - -static int icom_write(struct uart_port *port) -{ - unsigned long data_count; - unsigned char cmdReg; - unsigned long offset; - int temp_tail = port->state->xmit.tail; - - trace(ICOM_PORT, "WRITE", 0); - - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & - SA_FLAGS_READY_TO_XMIT) { - trace(ICOM_PORT, "WRITE_FULL", 0); - return 0; - } - - data_count = 0; - while ((port->state->xmit.head != temp_tail) && - (data_count <= XMIT_BUFF_SZ)) { - - ICOM_PORT->xmit_buf[data_count++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - } - - if (data_count) { - ICOM_PORT->statStg->xmit[0].flags = - cpu_to_le16(SA_FLAGS_READY_TO_XMIT); - ICOM_PORT->statStg->xmit[0].leLength = - cpu_to_le16(data_count); - offset = - (unsigned long) &ICOM_PORT->statStg->xmit[0] - - (unsigned long) ICOM_PORT->statStg; - *ICOM_PORT->xmitRestart = - cpu_to_le32(ICOM_PORT->statStg_pci + offset); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg | CMD_XMIT_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); - writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); - trace(ICOM_PORT, "WRITE_START", data_count); - /* write flush */ - readb(&ICOM_PORT->dram->StartXmitCmd); - } - - return data_count; -} - -static inline void check_modem_status(struct icom_port *icom_port) -{ - static char old_status = 0; - char delta_status; - unsigned char status; - - spin_lock(&icom_port->uart_port.lock); - - /*modem input register */ - status = readb(&icom_port->dram->isr); - trace(icom_port, "CHECK_MODEM", status); - delta_status = status ^ old_status; - if (delta_status) { - if (delta_status & ICOM_RI) - icom_port->uart_port.icount.rng++; - if (delta_status & ICOM_DSR) - icom_port->uart_port.icount.dsr++; - if (delta_status & ICOM_DCD) - uart_handle_dcd_change(&icom_port->uart_port, - delta_status & ICOM_DCD); - if (delta_status & ICOM_CTS) - uart_handle_cts_change(&icom_port->uart_port, - delta_status & ICOM_CTS); - - wake_up_interruptible(&icom_port->uart_port.state-> - port.delta_msr_wait); - old_status = status; - } - spin_unlock(&icom_port->uart_port.lock); -} - -static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) -{ - unsigned short int count; - int i; - - if (port_int_reg & (INT_XMIT_COMPLETED)) { - trace(icom_port, "XMIT_COMPLETE", 0); - - /* clear buffer in use bit */ - icom_port->statStg->xmit[0].flags &= - cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); - - count = (unsigned short int) - cpu_to_le16(icom_port->statStg->xmit[0].leLength); - icom_port->uart_port.icount.tx += count; - - for (i=0; iuart_port.state->xmit); i++) { - - icom_port->uart_port.state->xmit.tail++; - icom_port->uart_port.state->xmit.tail &= - (UART_XMIT_SIZE - 1); - } - - if (!icom_write(&icom_port->uart_port)) - /* activate write queue */ - uart_write_wakeup(&icom_port->uart_port); - } else - trace(icom_port, "XMIT_DISABLED", 0); -} - -static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) -{ - short int count, rcv_buff; - struct tty_struct *tty = icom_port->uart_port.state->port.tty; - unsigned short int status; - struct uart_icount *icount; - unsigned long offset; - unsigned char flag; - - trace(icom_port, "RCV_COMPLETE", 0); - rcv_buff = icom_port->next_rcv; - - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); - while (status & SA_FL_RCV_DONE) { - int first = -1; - - trace(icom_port, "FID_STATUS", status); - count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); - - trace(icom_port, "RCV_COUNT", count); - - trace(icom_port, "REAL_COUNT", count); - - offset = - cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - - icom_port->recv_buf_pci; - - /* Block copy all but the last byte as this may have status */ - if (count > 0) { - first = icom_port->recv_buf[offset]; - tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1); - } - - icount = &icom_port->uart_port.icount; - icount->rx += count; - - /* Break detect logic */ - if ((status & SA_FLAGS_FRAME_ERROR) - && first == 0) { - status &= ~SA_FLAGS_FRAME_ERROR; - status |= SA_FLAGS_BREAK_DET; - trace(icom_port, "BREAK_DET", 0); - } - - flag = TTY_NORMAL; - - if (status & - (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | - SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { - - if (status & SA_FLAGS_BREAK_DET) - icount->brk++; - if (status & SA_FLAGS_PARITY_ERROR) - icount->parity++; - if (status & SA_FLAGS_FRAME_ERROR) - icount->frame++; - if (status & SA_FLAGS_OVERRUN) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - */ - if (status & icom_port->ignore_status_mask) { - trace(icom_port, "IGNORE_CHAR", 0); - goto ignore_char; - } - - status &= icom_port->read_status_mask; - - if (status & SA_FLAGS_BREAK_DET) { - flag = TTY_BREAK; - } else if (status & SA_FLAGS_PARITY_ERROR) { - trace(icom_port, "PARITY_ERROR", 0); - flag = TTY_PARITY; - } else if (status & SA_FLAGS_FRAME_ERROR) - flag = TTY_FRAME; - - } - - tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); - - if (status & SA_FLAGS_OVERRUN) - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -ignore_char: - icom_port->statStg->rcv[rcv_buff].flags = 0; - icom_port->statStg->rcv[rcv_buff].leLength = 0; - icom_port->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - - rcv_buff++; - if (rcv_buff == NUM_RBUFFS) - rcv_buff = 0; - - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); - } - icom_port->next_rcv = rcv_buff; - tty_flip_buffer_push(tty); -} - -static void process_interrupt(u16 port_int_reg, - struct icom_port *icom_port) -{ - - spin_lock(&icom_port->uart_port.lock); - trace(icom_port, "INTERRUPT", port_int_reg); - - if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) - xmit_interrupt(port_int_reg, icom_port); - - if (port_int_reg & INT_RCV_COMPLETED) - recv_interrupt(port_int_reg, icom_port); - - spin_unlock(&icom_port->uart_port.lock); -} - -static irqreturn_t icom_interrupt(int irq, void *dev_id) -{ - void __iomem * int_reg; - u32 adapter_interrupts; - u16 port_int_reg; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; - - /* find icom_port for this interrupt */ - icom_adapter = (struct icom_adapter *) dev_id; - - if (icom_adapter->version == ADAPTER_V2) { - int_reg = icom_adapter->base_addr + 0x8024; - - adapter_interrupts = readl(int_reg); - - if (adapter_interrupts & 0x00003FFF) { - /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ - icom_port = &icom_adapter->port_info[2]; - port_int_reg = (u16) adapter_interrupts; - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - if (adapter_interrupts & 0x3FFF0000) { - /* port 3 interrupt */ - icom_port = &icom_adapter->port_info[3]; - if (icom_port->status == ICOM_PORT_ACTIVE) { - port_int_reg = - (u16) (adapter_interrupts >> 16); - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - } - - /* Clear out any pending interrupts */ - writel(adapter_interrupts, int_reg); - - int_reg = icom_adapter->base_addr + 0x8004; - } else { - int_reg = icom_adapter->base_addr + 0x4004; - } - - adapter_interrupts = readl(int_reg); - - if (adapter_interrupts & 0x00003FFF) { - /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ - icom_port = &icom_adapter->port_info[0]; - port_int_reg = (u16) adapter_interrupts; - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - if (adapter_interrupts & 0x3FFF0000) { - /* port 1 interrupt */ - icom_port = &icom_adapter->port_info[1]; - if (icom_port->status == ICOM_PORT_ACTIVE) { - port_int_reg = (u16) (adapter_interrupts >> 16); - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - } - - /* Clear out any pending interrupts */ - writel(adapter_interrupts, int_reg); - - /* flush the write */ - adapter_interrupts = readl(int_reg); - - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------ - * Begin serial-core API - * ------------------------------------------------------------------ - */ -static unsigned int icom_tx_empty(struct uart_port *port) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & - SA_FLAGS_READY_TO_XMIT) - ret = TIOCSER_TEMT; - else - ret = 0; - - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned char local_osr; - - trace(ICOM_PORT, "SET_MODEM", 0); - local_osr = readb(&ICOM_PORT->dram->osr); - - if (mctrl & TIOCM_RTS) { - trace(ICOM_PORT, "RAISE_RTS", 0); - local_osr |= ICOM_RTS; - } else { - trace(ICOM_PORT, "LOWER_RTS", 0); - local_osr &= ~ICOM_RTS; - } - - if (mctrl & TIOCM_DTR) { - trace(ICOM_PORT, "RAISE_DTR", 0); - local_osr |= ICOM_DTR; - } else { - trace(ICOM_PORT, "LOWER_DTR", 0); - local_osr &= ~ICOM_DTR; - } - - writeb(local_osr, &ICOM_PORT->dram->osr); -} - -static unsigned int icom_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int result; - - trace(ICOM_PORT, "GET_MODEM", 0); - - status = readb(&ICOM_PORT->dram->isr); - - result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) - | ((status & ICOM_RI) ? TIOCM_RNG : 0) - | ((status & ICOM_DSR) ? TIOCM_DSR : 0) - | ((status & ICOM_CTS) ? TIOCM_CTS : 0); - return result; -} - -static void icom_stop_tx(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "STOP", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); -} - -static void icom_start_tx(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "START", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) - writeb(cmdReg & ~CMD_HOLD_XMIT, - &ICOM_PORT->dram->CmdReg); - - icom_write(port); -} - -static void icom_send_xchar(struct uart_port *port, char ch) -{ - unsigned char xdata; - int index; - unsigned long flags; - - trace(ICOM_PORT, "SEND_XCHAR", ch); - - /* wait .1 sec to send char */ - for (index = 0; index < 10; index++) { - spin_lock_irqsave(&port->lock, flags); - xdata = readb(&ICOM_PORT->dram->xchar); - if (xdata == 0x00) { - trace(ICOM_PORT, "QUICK_WRITE", 0); - writeb(ch, &ICOM_PORT->dram->xchar); - - /* flush write operation */ - xdata = readb(&ICOM_PORT->dram->xchar); - spin_unlock_irqrestore(&port->lock, flags); - break; - } - spin_unlock_irqrestore(&port->lock, flags); - msleep(10); - } -} - -static void icom_stop_rx(struct uart_port *port) -{ - unsigned char cmdReg; - - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); -} - -static void icom_enable_ms(struct uart_port *port) -{ - /* no-op */ -} - -static void icom_break(struct uart_port *port, int break_state) -{ - unsigned char cmdReg; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "BREAK", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - if (break_state == -1) { - writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); - } else { - writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); - } - spin_unlock_irqrestore(&port->lock, flags); -} - -static int icom_open(struct uart_port *port) -{ - int retval; - - kref_get(&ICOM_PORT->adapter->kref); - retval = startup(ICOM_PORT); - - if (retval) { - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); - trace(ICOM_PORT, "STARTUP_ERROR", 0); - return retval; - } - - return 0; -} - -static void icom_close(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "CLOSE", 0); - - /* stop receiver */ - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); - - shutdown(ICOM_PORT); - - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); -} - -static void icom_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) -{ - int baud; - unsigned cflag, iflag; - char new_config2; - char new_config3 = 0; - char tmp_byte; - int index; - int rcv_buff, xmit_buff; - unsigned long offset; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "CHANGE_SPEED", 0); - - cflag = termios->c_cflag; - iflag = termios->c_iflag; - - new_config2 = ICOM_ACFG_DRIVE1; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: /* 5 bits/char */ - new_config2 |= ICOM_ACFG_5BPC; - break; - case CS6: /* 6 bits/char */ - new_config2 |= ICOM_ACFG_6BPC; - break; - case CS7: /* 7 bits/char */ - new_config2 |= ICOM_ACFG_7BPC; - break; - case CS8: /* 8 bits/char */ - new_config2 |= ICOM_ACFG_8BPC; - break; - default: - break; - } - if (cflag & CSTOPB) { - /* 2 stop bits */ - new_config2 |= ICOM_ACFG_2STOP_BIT; - } - if (cflag & PARENB) { - /* parity bit enabled */ - new_config2 |= ICOM_ACFG_PARITY_ENAB; - trace(ICOM_PORT, "PARENB", 0); - } - if (cflag & PARODD) { - /* odd parity */ - new_config2 |= ICOM_ACFG_PARITY_ODD; - trace(ICOM_PORT, "PARODD", 0); - } - - /* Determine divisor based on baud rate */ - baud = uart_get_baud_rate(port, termios, old_termios, - icom_acfg_baud[0], - icom_acfg_baud[BAUD_TABLE_LIMIT]); - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - - for (index = 0; index < BAUD_TABLE_LIMIT; index++) { - if (icom_acfg_baud[index] == baud) { - new_config3 = index; - break; - } - } - - uart_update_timeout(port, cflag, baud); - - /* CTS flow control flag and modem status interrupts */ - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); - if (cflag & CRTSCTS) - tmp_byte |= HDLC_HDW_FLOW; - else - tmp_byte &= ~HDLC_HDW_FLOW; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); - - /* - * Set up parity check flag - */ - ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; - if (iflag & INPCK) - ICOM_PORT->read_status_mask |= - SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; - - if ((iflag & BRKINT) || (iflag & PARMRK)) - ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; - - /* - * Characters to ignore - */ - ICOM_PORT->ignore_status_mask = 0; - if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= - SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; - if (iflag & IGNBRK) { - ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; - } - - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; - - /* Turn off Receiver to prepare for reset */ - writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); - - for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { - break; - } - } - - /* clear all current buffers of data */ - for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { - ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; - ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; - ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - } - - for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { - ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; - } - - /* activate changes and start xmit and receiver here */ - /* Enable the receiver */ - writeb(new_config3, &(ICOM_PORT->dram->async_config3)); - writeb(new_config2, &(ICOM_PORT->dram->async_config2)); - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); - tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); - writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ - writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ - - /* reset processor */ - writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); - - for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { - break; - } - } - - /* Enable Transmitter and Reciever */ - offset = - (unsigned long) &ICOM_PORT->statStg->rcv[0] - - (unsigned long) ICOM_PORT->statStg; - writel(ICOM_PORT->statStg_pci + offset, - &ICOM_PORT->dram->RcvStatusAddr); - ICOM_PORT->next_rcv = 0; - ICOM_PORT->put_length = 0; - *ICOM_PORT->xmitRestart = 0; - writel(ICOM_PORT->xmitRestart_pci, - &ICOM_PORT->dram->XmitStatusAddr); - trace(ICOM_PORT, "XR_ENAB", 0); - writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *icom_type(struct uart_port *port) -{ - return "icom"; -} - -static void icom_release_port(struct uart_port *port) -{ -} - -static int icom_request_port(struct uart_port *port) -{ - return 0; -} - -static void icom_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ICOM; -} - -static struct uart_ops icom_ops = { - .tx_empty = icom_tx_empty, - .set_mctrl = icom_set_mctrl, - .get_mctrl = icom_get_mctrl, - .stop_tx = icom_stop_tx, - .start_tx = icom_start_tx, - .send_xchar = icom_send_xchar, - .stop_rx = icom_stop_rx, - .enable_ms = icom_enable_ms, - .break_ctl = icom_break, - .startup = icom_open, - .shutdown = icom_close, - .set_termios = icom_set_termios, - .type = icom_type, - .release_port = icom_release_port, - .request_port = icom_request_port, - .config_port = icom_config_port, -}; - -#define ICOM_CONSOLE NULL - -static struct uart_driver icom_uart_driver = { - .owner = THIS_MODULE, - .driver_name = ICOM_DRIVER_NAME, - .dev_name = "ttyA", - .major = ICOM_MAJOR, - .minor = ICOM_MINOR_START, - .nr = NR_PORTS, - .cons = ICOM_CONSOLE, -}; - -static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) -{ - u32 subsystem_id = icom_adapter->subsystem_id; - int i; - struct icom_port *icom_port; - - if (icom_adapter->version == ADAPTER_V1) { - icom_adapter->numb_ports = 2; - - for (i = 0; i < 2; i++) { - icom_port = &icom_adapter->port_info[i]; - icom_port->port = i; - icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_UNKNOWN; - } - } else { - if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { - icom_adapter->numb_ports = 4; - - for (i = 0; i < 4; i++) { - icom_port = &icom_adapter->port_info[i]; - - icom_port->port = i; - icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_IMBED_MODEM; - } - } else { - icom_adapter->numb_ports = 4; - - icom_adapter->port_info[0].port = 0; - icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; - - if (subsystem_id == - PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { - icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; - } else { - icom_adapter->port_info[0].imbed_modem = ICOM_RVX; - } - - icom_adapter->port_info[1].status = ICOM_PORT_OFF; - - icom_adapter->port_info[2].port = 2; - icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; - icom_adapter->port_info[2].imbed_modem = ICOM_RVX; - icom_adapter->port_info[3].status = ICOM_PORT_OFF; - } - } - - return 0; -} - -static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) -{ - if (icom_adapter->version == ADAPTER_V1) { - icom_port->global_reg = icom_adapter->base_addr + 0x4000; - icom_port->int_reg = icom_adapter->base_addr + - 0x4004 + 2 - 2 * port_num; - } else { - icom_port->global_reg = icom_adapter->base_addr + 0x8000; - if (icom_port->port < 2) - icom_port->int_reg = icom_adapter->base_addr + - 0x8004 + 2 - 2 * icom_port->port; - else - icom_port->int_reg = icom_adapter->base_addr + - 0x8024 + 2 - 2 * (icom_port->port - 2); - } -} -static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) -{ - struct icom_port *icom_port; - int port_num; - - for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { - - icom_port = &icom_adapter->port_info[port_num]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - icom_port_active(icom_port, icom_adapter, port_num); - icom_port->dram = icom_adapter->base_addr + - 0x2000 * icom_port->port; - - icom_port->adapter = icom_adapter; - - /* get port memory */ - if (get_port_memory(icom_port) != 0) { - dev_err(&icom_port->adapter->pci_dev->dev, - "Memory allocation for port FAILED\n"); - } - } - } - return 0; -} - -static int __devinit icom_alloc_adapter(struct icom_adapter - **icom_adapter_ref) -{ - int adapter_count = 0; - struct icom_adapter *icom_adapter; - struct icom_adapter *cur_adapter_entry; - struct list_head *tmp; - - icom_adapter = (struct icom_adapter *) - kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); - - if (!icom_adapter) { - return -ENOMEM; - } - - list_for_each(tmp, &icom_adapter_head) { - cur_adapter_entry = - list_entry(tmp, struct icom_adapter, - icom_adapter_entry); - if (cur_adapter_entry->index != adapter_count) { - break; - } - adapter_count++; - } - - icom_adapter->index = adapter_count; - list_add_tail(&icom_adapter->icom_adapter_entry, tmp); - - *icom_adapter_ref = icom_adapter; - return 0; -} - -static void icom_free_adapter(struct icom_adapter *icom_adapter) -{ - list_del(&icom_adapter->icom_adapter_entry); - kfree(icom_adapter); -} - -static void icom_remove_adapter(struct icom_adapter *icom_adapter) -{ - struct icom_port *icom_port; - int index; - - for (index = 0; index < icom_adapter->numb_ports; index++) { - icom_port = &icom_adapter->port_info[index]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - dev_info(&icom_adapter->pci_dev->dev, - "Device removed\n"); - - uart_remove_one_port(&icom_uart_driver, - &icom_port->uart_port); - - /* be sure that DTR and RTS are dropped */ - writeb(0x00, &icom_port->dram->osr); - - /* Wait 0.1 Sec for simple Init to complete */ - msleep(100); - - /* Stop proccessor */ - stop_processor(icom_port); - - free_port_memory(icom_port); - } - } - - free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); - iounmap(icom_adapter->base_addr); - pci_release_regions(icom_adapter->pci_dev); - icom_free_adapter(icom_adapter); -} - -static void icom_kref_release(struct kref *kref) -{ - struct icom_adapter *icom_adapter; - - icom_adapter = to_icom_adapter(kref); - icom_remove_adapter(icom_adapter); -} - -static int __devinit icom_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - int index; - unsigned int command_reg; - int retval; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; - - retval = pci_enable_device(dev); - if (retval) { - dev_err(&dev->dev, "Device enable FAILED\n"); - return retval; - } - - if ( (retval = pci_request_regions(dev, "icom"))) { - dev_err(&dev->dev, "pci_request_regions FAILED\n"); - pci_disable_device(dev); - return retval; - } - - pci_set_master(dev); - - if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { - dev_err(&dev->dev, "PCI Config read FAILED\n"); - return retval; - } - - pci_write_config_dword(dev, PCI_COMMAND, - command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - - if (ent->driver_data == ADAPTER_V1) { - pci_write_config_dword(dev, 0x44, 0x8300830A); - } else { - pci_write_config_dword(dev, 0x44, 0x42004200); - pci_write_config_dword(dev, 0x48, 0x42004200); - } - - - retval = icom_alloc_adapter(&icom_adapter); - if (retval) { - dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); - retval = -EIO; - goto probe_exit0; - } - - icom_adapter->base_addr_pci = pci_resource_start(dev, 0); - icom_adapter->pci_dev = dev; - icom_adapter->version = ent->driver_data; - icom_adapter->subsystem_id = ent->subdevice; - - - retval = icom_init_ports(icom_adapter); - if (retval) { - dev_err(&dev->dev, "Port configuration failed\n"); - goto probe_exit1; - } - - icom_adapter->base_addr = pci_ioremap_bar(dev, 0); - - if (!icom_adapter->base_addr) - goto probe_exit1; - - /* save off irq and request irq line */ - if ( (retval = request_irq(dev->irq, icom_interrupt, - IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME, - (void *) icom_adapter))) { - goto probe_exit2; - } - - retval = icom_load_ports(icom_adapter); - - for (index = 0; index < icom_adapter->numb_ports; index++) { - icom_port = &icom_adapter->port_info[index]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; - icom_port->uart_port.type = PORT_ICOM; - icom_port->uart_port.iotype = UPIO_MEM; - icom_port->uart_port.membase = - (char *) icom_adapter->base_addr_pci; - icom_port->uart_port.fifosize = 16; - icom_port->uart_port.ops = &icom_ops; - icom_port->uart_port.line = - icom_port->port + icom_adapter->index * 4; - if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { - icom_port->status = ICOM_PORT_OFF; - dev_err(&dev->dev, "Device add failed\n"); - } else - dev_info(&dev->dev, "Device added\n"); - } - } - - kref_init(&icom_adapter->kref); - return 0; - -probe_exit2: - iounmap(icom_adapter->base_addr); -probe_exit1: - icom_free_adapter(icom_adapter); - -probe_exit0: - pci_release_regions(dev); - pci_disable_device(dev); - - return retval; -} - -static void __devexit icom_remove(struct pci_dev *dev) -{ - struct icom_adapter *icom_adapter; - struct list_head *tmp; - - list_for_each(tmp, &icom_adapter_head) { - icom_adapter = list_entry(tmp, struct icom_adapter, - icom_adapter_entry); - if (icom_adapter->pci_dev == dev) { - kref_put(&icom_adapter->kref, icom_kref_release); - return; - } - } - - dev_err(&dev->dev, "Unable to find device to remove\n"); -} - -static struct pci_driver icom_pci_driver = { - .name = ICOM_DRIVER_NAME, - .id_table = icom_pci_table, - .probe = icom_probe, - .remove = __devexit_p(icom_remove), -}; - -static int __init icom_init(void) -{ - int ret; - - spin_lock_init(&icom_lock); - - ret = uart_register_driver(&icom_uart_driver); - if (ret) - return ret; - - ret = pci_register_driver(&icom_pci_driver); - - if (ret < 0) - uart_unregister_driver(&icom_uart_driver); - - return ret; -} - -static void __exit icom_exit(void) -{ - pci_unregister_driver(&icom_pci_driver); - uart_unregister_driver(&icom_uart_driver); -} - -module_init(icom_init); -module_exit(icom_exit); - -MODULE_AUTHOR("Michael Anderson "); -MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); -MODULE_SUPPORTED_DEVICE - ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("icom_call_setup.bin"); -MODULE_FIRMWARE("icom_res_dce.bin"); -MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h deleted file mode 100644 index c8029e0..0000000 --- a/drivers/serial/icom.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * icom.h - * - * Copyright (C) 2001 Michael Anderson, IBM Corporation - * - * Serial device driver include file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) -static int icom_acfg_baud[] = { - 300, - 600, - 900, - 1200, - 1800, - 2400, - 3600, - 4800, - 7200, - 9600, - 14400, - 19200, - 28800, - 38400, - 57600, - 76800, - 115200, - 153600, - 230400, - 307200, - 460800, -}; - -struct icom_regs { - u32 control; /* Adapter Control Register */ - u32 interrupt; /* Adapter Interrupt Register */ - u32 int_mask; /* Adapter Interrupt Mask Reg */ - u32 int_pri; /* Adapter Interrupt Priority r */ - u32 int_reg_b; /* Adapter non-masked Interrupt */ - u32 resvd01; - u32 resvd02; - u32 resvd03; - u32 control_2; /* Adapter Control Register 2 */ - u32 interrupt_2; /* Adapter Interrupt Register 2 */ - u32 int_mask_2; /* Adapter Interrupt Mask 2 */ - u32 int_pri_2; /* Adapter Interrupt Prior 2 */ - u32 int_reg_2b; /* Adapter non-masked 2 */ -}; - -struct func_dram { - u32 reserved[108]; /* 0-1B0 reserved by personality code */ - u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ - u8 RcvStnAddr; /* 1B4 Receive Station Addr */ - u8 IdleState; /* 1B5 Idle State */ - u8 IdleMonitor; /* 1B6 Idle Monitor */ - u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ - u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ - u8 StartXmitCmd; /* 1BC Start Xmit Command */ - u8 HDLCConfigReg; /* 1BD Reserved */ - u8 CauseCode; /* 1BE Cause code for fatal error */ - u8 xchar; /* 1BF High priority send */ - u32 reserved3; /* 1C0-1C3 Reserved */ - u8 PrevCmdReg; /* 1C4 Reserved */ - u8 CmdReg; /* 1C5 Command Register */ - u8 async_config2; /* 1C6 Async Config Byte 2 */ - u8 async_config3; /* 1C7 Async Config Byte 3 */ - u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ - u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ - u8 misc_flags; /* 1DD misc flags */ -#define V2_HARDWARE 0x40 -#define ICOM_HDW_ACTIVE 0x01 - u8 call_length; /* 1DE Phone #/CFI buff ln */ - u8 call_length2; /* 1DF Upper byte (unused) */ - u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ - u16 timer_value; /* 1E4-1E5 general timer value */ - u8 timer_command; /* 1E6 general timer cmd */ - u8 dce_command; /* 1E7 dce command reg */ - u8 dce_cmd_status; /* 1E8 dce command stat */ - u8 x21_r1_ioff; /* 1E9 dce ready counter */ - u8 x21_r0_ioff; /* 1EA dce not ready ctr */ - u8 x21_ralt_ioff; /* 1EB dce CNR counter */ - u8 x21_r1_ion; /* 1EC dce ready I on ctr */ - u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ - u8 ier; /* 1EE Interrupt Enable */ - u8 isr; /* 1EF Input Signal Reg */ - u8 osr; /* 1F0 Output Signal Reg */ - u8 reset; /* 1F1 Reset/Reload Reg */ - u8 disable; /* 1F2 Disable Reg */ - u8 sync; /* 1F3 Sync Reg */ - u8 error_stat; /* 1F4 Error Status */ - u8 cable_id; /* 1F5 Cable ID */ - u8 cs_length; /* 1F6 CS Load Length */ - u8 mac_length; /* 1F7 Mac Load Length */ - u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ - u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ -}; - -/* - * adapter defines and structures - */ -#define ICOM_CONTROL_START_A 0x00000008 -#define ICOM_CONTROL_STOP_A 0x00000004 -#define ICOM_CONTROL_START_B 0x00000002 -#define ICOM_CONTROL_STOP_B 0x00000001 -#define ICOM_CONTROL_START_C 0x00000008 -#define ICOM_CONTROL_STOP_C 0x00000004 -#define ICOM_CONTROL_START_D 0x00000002 -#define ICOM_CONTROL_STOP_D 0x00000001 -#define ICOM_IRAM_OFFSET 0x1000 -#define ICOM_IRAM_SIZE 0x0C00 -#define ICOM_DCE_IRAM_OFFSET 0x0A00 -#define ICOM_CABLE_ID_VALID 0x01 -#define ICOM_CABLE_ID_MASK 0xF0 -#define ICOM_DISABLE 0x80 -#define CMD_XMIT_RCV_ENABLE 0xC0 -#define CMD_XMIT_ENABLE 0x40 -#define CMD_RCV_DISABLE 0x00 -#define CMD_RCV_ENABLE 0x80 -#define CMD_RESTART 0x01 -#define CMD_HOLD_XMIT 0x02 -#define CMD_SND_BREAK 0x04 -#define RS232_CABLE 0x06 -#define V24_CABLE 0x0E -#define V35_CABLE 0x0C -#define V36_CABLE 0x02 -#define NO_CABLE 0x00 -#define START_DOWNLOAD 0x80 -#define ICOM_INT_MASK_PRC_A 0x00003FFF -#define ICOM_INT_MASK_PRC_B 0x3FFF0000 -#define ICOM_INT_MASK_PRC_C 0x00003FFF -#define ICOM_INT_MASK_PRC_D 0x3FFF0000 -#define INT_RCV_COMPLETED 0x1000 -#define INT_XMIT_COMPLETED 0x2000 -#define INT_IDLE_DETECT 0x0800 -#define INT_RCV_DISABLED 0x0400 -#define INT_XMIT_DISABLED 0x0200 -#define INT_RCV_XMIT_SHUTDOWN 0x0100 -#define INT_FATAL_ERROR 0x0080 -#define INT_CABLE_PULL 0x0020 -#define INT_SIGNAL_CHANGE 0x0010 -#define HDLC_PPP_PURE_ASYNC 0x02 -#define HDLC_FF_FILL 0x00 -#define HDLC_HDW_FLOW 0x01 -#define START_XMIT 0x80 -#define ICOM_ACFG_DRIVE1 0x20 -#define ICOM_ACFG_NO_PARITY 0x00 -#define ICOM_ACFG_PARITY_ENAB 0x02 -#define ICOM_ACFG_PARITY_ODD 0x01 -#define ICOM_ACFG_8BPC 0x00 -#define ICOM_ACFG_7BPC 0x04 -#define ICOM_ACFG_6BPC 0x08 -#define ICOM_ACFG_5BPC 0x0C -#define ICOM_ACFG_1STOP_BIT 0x00 -#define ICOM_ACFG_2STOP_BIT 0x10 -#define ICOM_DTR 0x80 -#define ICOM_RTS 0x40 -#define ICOM_RI 0x08 -#define ICOM_DSR 0x80 -#define ICOM_DCD 0x20 -#define ICOM_CTS 0x40 - -#define NUM_XBUFFS 1 -#define NUM_RBUFFS 2 -#define RCV_BUFF_SZ 0x0200 -#define XMIT_BUFF_SZ 0x1000 -struct statusArea { - /**********************************************/ - /* Transmit Status Area */ - /**********************************************/ - struct xmit_status_area{ - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 leLengthASD; - u16 leOffsetASD; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ -#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ -#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ -#define SA_FLAGS_READY_TO_XMIT 0x0800 -#define SA_FLAGS_STAT_MASK 0x007F - } xmit[NUM_XBUFFS]; - - /**********************************************/ - /* Receive Status Area */ - /**********************************************/ - struct { - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 WorkingLength; /* size of segment */ - u16 reserv01; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FL_RCV_DONE 0x0010 /* Data ready */ -#define SA_FLAGS_OVERRUN 0x0040 -#define SA_FLAGS_PARITY_ERROR 0x0080 -#define SA_FLAGS_FRAME_ERROR 0x0001 -#define SA_FLAGS_FRAME_TRUNC 0x0002 -#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ -#define SA_FLAGS_RCV_MASK 0xFFE6 - } rcv[NUM_RBUFFS]; -}; - -struct icom_adapter; - - -#define ICOM_MAJOR 243 -#define ICOM_MINOR_START 0 - -struct icom_port { - struct uart_port uart_port; - u8 imbed_modem; -#define ICOM_UNKNOWN 1 -#define ICOM_RVX 2 -#define ICOM_IMBED_MODEM 3 - unsigned char cable_id; - unsigned char read_status_mask; - unsigned char ignore_status_mask; - void __iomem * int_reg; - struct icom_regs __iomem *global_reg; - struct func_dram __iomem *dram; - int port; - struct statusArea *statStg; - dma_addr_t statStg_pci; - u32 *xmitRestart; - dma_addr_t xmitRestart_pci; - unsigned char *xmit_buf; - dma_addr_t xmit_buf_pci; - unsigned char *recv_buf; - dma_addr_t recv_buf_pci; - int next_rcv; - int put_length; - int status; -#define ICOM_PORT_ACTIVE 1 /* Port exists. */ -#define ICOM_PORT_OFF 0 /* Port does not exist. */ - int load_in_progress; - struct icom_adapter *adapter; -}; - -struct icom_adapter { - void __iomem * base_addr; - unsigned long base_addr_pci; - struct pci_dev *pci_dev; - struct icom_port port_info[4]; - int index; - int version; -#define ADAPTER_V1 0x0001 -#define ADAPTER_V2 0x0002 - u32 subsystem_id; -#define FOUR_PORT_MODEL 0x0252 -#define V2_TWO_PORTS_RVX 0x021A -#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 - int numb_ports; - struct list_head icom_adapter_entry; - struct kref kref; -}; - -/* prototype */ -extern void iCom_sercons_init(void); - -struct lookup_proc_table { - u32 __iomem *global_control_reg; - unsigned long processor_id; -}; - -struct lookup_int_table { - u32 __iomem *global_int_mask; - unsigned long processor_id; -}; diff --git a/drivers/serial/ifx6x60.c b/drivers/serial/ifx6x60.c deleted file mode 100644 index ab93763..0000000 --- a/drivers/serial/ifx6x60.c +++ /dev/null @@ -1,1406 +0,0 @@ -/**************************************************************************** - * - * Driver for the IFX 6x60 spi modem. - * - * Copyright (C) 2008 Option International - * Copyright (C) 2008 Filip Aben - * Denis Joseph Barrow - * Jan Dumon - * - * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - * Driver modified by Intel from Option gtm501l_spi.c - * - * Notes - * o The driver currently assumes a single device only. If you need to - * change this then look for saved_ifx_dev and add a device lookup - * o The driver is intended to be big-endian safe but has never been - * tested that way (no suitable hardware). There are a couple of FIXME - * notes by areas that may need addressing - * o Some of the GPIO naming/setup assumptions may need revisiting if - * you need to use this driver for another platform. - * - *****************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ifx6x60.h" - -#define IFX_SPI_MORE_MASK 0x10 -#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ -#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ -#define IFX_SPI_TTY_ID 0 -#define IFX_SPI_TIMEOUT_SEC 2 -#define IFX_SPI_HEADER_0 (-1) -#define IFX_SPI_HEADER_F (-2) - -/* forward reference */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); - -/* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ -static struct tty_driver *tty_drv; -static struct ifx_spi_device *saved_ifx_dev; -static struct lock_class_key ifx_spi_key; - -/* GPIO/GPE settings */ - -/** - * mrdy_set_high - set MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_high(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 1); -} - -/** - * mrdy_set_low - clear MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_low(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 0); -} - -/** - * ifx_spi_power_state_set - * @ifx_dev: our SPI device - * @val: bits to set - * - * Set bit in power status and signal power system if status becomes non-0 - */ -static void -ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - /* - * if power status is already non-0, just update, else - * tell power system - */ - if (!ifx_dev->power_status) - pm_runtime_get(&ifx_dev->spi_dev->dev); - ifx_dev->power_status |= val; - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * ifx_spi_power_state_clear - clear power bit - * @ifx_dev: our SPI device - * @val: bits to clear - * - * clear bit in power status and signal power system if status becomes 0 - */ -static void -ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - if (ifx_dev->power_status) { - ifx_dev->power_status &= ~val; - if (!ifx_dev->power_status) - pm_runtime_put(&ifx_dev->spi_dev->dev); - } - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * swap_buf - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf(u16 *buf, int len, void *end) -{ - int n; - - len = ((len + 1) >> 1); - if ((void *)&buf[len] > end) { - pr_err("swap_buf: swap exceeds boundary (%p > %p)!", - &buf[len], end); - return; - } - for (n = 0; n < len; n++) { - *buf = cpu_to_be16(*buf); - buf++; - } -} - -/** - * mrdy_assert - assert MRDY line - * @ifx_dev: our SPI device - * - * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low - * now. - * - * FIXME: Can SRDY even go high as we are running this code ? - */ -static void mrdy_assert(struct ifx_spi_device *ifx_dev) -{ - int val = gpio_get_value(ifx_dev->gpio.srdy); - if (!val) { - if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, - &ifx_dev->flags)) { - ifx_dev->spi_timer.expires = - jiffies + IFX_SPI_TIMEOUT_SEC*HZ; - add_timer(&ifx_dev->spi_timer); - - } - } - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); - mrdy_set_high(ifx_dev); -} - -/** - * ifx_spi_hangup - hang up an IFX device - * @ifx_dev: our SPI device - * - * Hang up the tty attached to the IFX device if one is currently - * open. If not take no action - */ -static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) -{ - struct tty_port *pport = &ifx_dev->tty_port; - struct tty_struct *tty = tty_port_tty_get(pport); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } -} - -/** - * ifx_spi_timeout - SPI timeout - * @arg: our SPI device - * - * The SPI has timed out: hang up the tty. Users will then see a hangup - * and error events. - */ -static void ifx_spi_timeout(unsigned long arg) -{ - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; - - dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); - ifx_spi_ttyhangup(ifx_dev); - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); -} - -/* char/tty operations */ - -/** - * ifx_spi_tiocmget - get modem lines - * @tty: our tty device - * @filp: file handle issuing the request - * - * Map the signal state into Linux modem flags and report the value - * in Linux terms - */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) -{ - unsigned int value; - struct ifx_spi_device *ifx_dev = tty->driver_data; - - value = - (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | - (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | - (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | - (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | - (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | - (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); - return value; -} - -/** - * ifx_spi_tiocmset - set modem bits - * @tty: the tty structure - * @filp: file handle issuing the request - * @set: bits to set - * @clear: bits to clear - * - * The IFX6x60 only supports DTR and RTS. Set them accordingly - * and flag that an update to the modem is needed. - * - * FIXME: do we need to kick the tranfers when we do this ? - */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, - unsigned int set, unsigned int clear) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - - if (set & TIOCM_RTS) - set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (set & TIOCM_DTR) - set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - if (clear & TIOCM_RTS) - clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (clear & TIOCM_DTR) - clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - - set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); - return 0; -} - -/** - * ifx_spi_open - called on tty open - * @tty: our tty device - * @filp: file handle being associated with the tty - * - * Open the tty interface. We let the tty_port layer do all the work - * for us. - * - * FIXME: Remove single device assumption and saved_ifx_dev - */ -static int ifx_spi_open(struct tty_struct *tty, struct file *filp) -{ - return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); -} - -/** - * ifx_spi_close - called when our tty closes - * @tty: the tty being closed - * @filp: the file handle being closed - * - * Perform the close of the tty. We use the tty_port layer to do all - * our hard work. - */ -static void ifx_spi_close(struct tty_struct *tty, struct file *filp) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_close(&ifx_dev->tty_port, tty, filp); - /* FIXME: should we do an ifx_spi_reset here ? */ -} - -/** - * ifx_decode_spi_header - decode received header - * @buffer: the received data - * @length: decoded length - * @more: decoded more flag - * @received_cts: status of cts we received - * - * Note how received_cts is handled -- if header is all F it is left - * the same as it was, if header is all 0 it is set to 0 otherwise it is - * taken from the incoming header. - * - * FIXME: endianness - */ -static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, - unsigned char *more, unsigned char *received_cts) -{ - u16 h1; - u16 h2; - u16 *in_buffer = (u16 *)buffer; - - h1 = *in_buffer; - h2 = *(in_buffer+1); - - if (h1 == 0 && h2 == 0) { - *received_cts = 0; - return IFX_SPI_HEADER_0; - } else if (h1 == 0xffff && h2 == 0xffff) { - /* spi_slave_cts remains as it was */ - return IFX_SPI_HEADER_F; - } - - *length = h1 & 0xfff; /* upper bits of byte are flags */ - *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; - *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; - return 0; -} - -/** - * ifx_setup_spi_header - set header fields - * @txbuffer: pointer to start of SPI buffer - * @tx_count: bytes - * @more: indicate if more to follow - * - * Format up an SPI header for a transfer - * - * FIXME: endianness? - */ -static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, - unsigned char more) -{ - *(u16 *)(txbuffer) = tx_count; - *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; - txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; -} - -/** - * ifx_spi_wakeup_serial - SPI space made - * @port_data: our SPI device - * - * We have emptied the FIFO enough that we want to get more data - * queued into it. Poke the line discipline via tty_wakeup so that - * it will feed us more bits - */ -static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) -{ - struct tty_struct *tty; - - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_wakeup(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_prepare_tx_buffer - prepare transmit frame - * @ifx_dev: our SPI device - * - * The transmit buffr needs a header and various other bits of - * information followed by as much data as we can pull from the FIFO - * and transfer. This function formats up a suitable buffer in the - * ifx_dev->tx_buffer - * - * FIXME: performance - should we wake the tty when the queue is half - * empty ? - */ -static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) -{ - int temp_count; - int queue_length; - int tx_count; - unsigned char *tx_buffer; - - tx_buffer = ifx_dev->tx_buffer; - memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE); - - /* make room for required SPI header */ - tx_buffer += IFX_SPI_HEADER_OVERHEAD; - tx_count = IFX_SPI_HEADER_OVERHEAD; - - /* clear to signal no more data if this turns out to be the - * last buffer sent in a sequence */ - ifx_dev->spi_more = 0; - - /* if modem cts is set, just send empty buffer */ - if (!ifx_dev->spi_slave_cts) { - /* see if there's tx data */ - queue_length = kfifo_len(&ifx_dev->tx_fifo); - if (queue_length != 0) { - /* data to mux -- see if there's room for it */ - temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); - temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, - tx_buffer, temp_count, - &ifx_dev->fifo_lock); - - /* update buffer pointer and data count in message */ - tx_buffer += temp_count; - tx_count += temp_count; - if (temp_count == queue_length) - /* poke port to get more data */ - ifx_spi_wakeup_serial(ifx_dev); - else /* more data in port, use next SPI message */ - ifx_dev->spi_more = 1; - } - } - /* have data and info for header -- set up SPI header in buffer */ - /* spi header needs payload size, not entire buffer size */ - ifx_spi_setup_spi_header(ifx_dev->tx_buffer, - tx_count-IFX_SPI_HEADER_OVERHEAD, - ifx_dev->spi_more); - /* swap actual data in the buffer */ - swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, - &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); - return tx_count; -} - -/** - * ifx_spi_write - line discipline write - * @tty: our tty device - * @buf: pointer to buffer to write (kernel space) - * @count: size of buffer - * - * Write the characters we have been given into the FIFO. If the device - * is not active then activate it, when the SRDY line is asserted back - * this will commence I/O - */ -static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - unsigned char *tmp_buf = (unsigned char *)buf; - int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, - &ifx_dev->fifo_lock); - mrdy_assert(ifx_dev); - return tx_count; -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how much data we can accept before we drop bytes. As we use - * a simple FIFO this is nice and easy. - */ -static int ifx_spi_write_room(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how many characters we have buffered. In our case this is the - * number of bytes sitting in our transmit FIFO. - */ -static int ifx_spi_chars_in_buffer(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_port_hangup - * @port: our tty port - * - * tty port hang up. Called when tty_hangup processing is invoked either - * by loss of carrier, or by software (eg vhangup). Serialized against - * activate/shutdown by the tty layer. - */ -static void ifx_spi_hangup(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_hangup(&ifx_dev->tty_port); -} - -/** - * ifx_port_activate - * @port: our tty port - * - * tty port activate method - called for first open. Serialized - * with hangup and shutdown by the tty layer. - */ -static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - /* clear any old data; can't do this in 'close' */ - kfifo_reset(&ifx_dev->tx_fifo); - - /* put port data into this tty */ - tty->driver_data = ifx_dev; - - /* allows flip string push from int context */ - tty->low_latency = 1; - - return 0; -} - -/** - * ifx_port_shutdown - * @port: our tty port - * - * tty port shutdown method - called for last port close. Serialized - * with hangup and activate by the tty layer. - */ -static void ifx_port_shutdown(struct tty_port *port) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - tasklet_kill(&ifx_dev->io_work_tasklet); -} - -static const struct tty_port_operations ifx_tty_port_ops = { - .activate = ifx_port_activate, - .shutdown = ifx_port_shutdown, -}; - -static const struct tty_operations ifx_spi_serial_ops = { - .open = ifx_spi_open, - .close = ifx_spi_close, - .write = ifx_spi_write, - .hangup = ifx_spi_hangup, - .write_room = ifx_spi_write_room, - .chars_in_buffer = ifx_spi_chars_in_buffer, - .tiocmget = ifx_spi_tiocmget, - .tiocmset = ifx_spi_tiocmset, -}; - -/** - * ifx_spi_insert_fip_string - queue received data - * @ifx_ser: our SPI device - * @chars: buffer we have received - * @size: number of chars reeived - * - * Queue bytes to the tty assuming the tty side is currently open. If - * not the discard the data. - */ -static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, - unsigned char *chars, size_t size) -{ - struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_insert_flip_string(tty, chars, size); - tty_flip_buffer_push(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_complete - SPI transfer completed - * @ctx: our SPI device - * - * An SPI transfer has completed. Process any received data and kick off - * any further transmits we can commence. - */ -static void ifx_spi_complete(void *ctx) -{ - struct ifx_spi_device *ifx_dev = ctx; - struct tty_struct *tty; - struct tty_ldisc *ldisc = NULL; - int length; - int actual_length; - unsigned char more; - unsigned char cts; - int local_write_pending = 0; - int queue_length; - int srdy; - int decode_result; - - mrdy_set_low(ifx_dev); - - if (!ifx_dev->spi_msg.status) { - /* check header validity, get comm flags */ - swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, - &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); - decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, - &length, &more, &cts); - if (decode_result == IFX_SPI_HEADER_0) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header 0"); - ifx_dev->spi_slave_cts = 0; - goto complete_exit; - } else if (decode_result == IFX_SPI_HEADER_F) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header F"); - goto complete_exit; - } - - ifx_dev->spi_slave_cts = cts; - - actual_length = min((unsigned int)length, - ifx_dev->spi_msg.actual_length); - swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), - actual_length, - &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); - ifx_spi_insert_flip_string( - ifx_dev, - ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, - (size_t)actual_length); - } else { - dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", - ifx_dev->spi_msg.status); - } - -complete_exit: - if (ifx_dev->write_pending) { - ifx_dev->write_pending = 0; - local_write_pending = 1; - } - - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); - - queue_length = kfifo_len(&ifx_dev->tx_fifo); - srdy = gpio_get_value(ifx_dev->gpio.srdy); - if (!srdy) - ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); - - /* schedule output if there is more to do */ - if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else { - if (more || ifx_dev->spi_more || queue_length > 0 || - local_write_pending) { - if (ifx_dev->spi_slave_cts) { - if (more) - mrdy_assert(ifx_dev); - } else - mrdy_assert(ifx_dev); - } else { - /* - * poke line discipline driver if any for more data - * may or may not get more data to write - * for now, say not busy - */ - ifx_spi_power_state_clear(ifx_dev, - IFX_SPI_POWER_DATA_PENDING); - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (tty) { - ldisc = tty_ldisc_ref(tty); - if (ldisc) { - ldisc->ops->write_wakeup(tty); - tty_ldisc_deref(ldisc); - } - tty_kref_put(tty); - } - } - } -} - -/** - * ifx_spio_io - I/O tasklet - * @data: our SPI device - * - * Queue data for transmission if possible and then kick off the - * transfer. - */ -static void ifx_spi_io(unsigned long data) -{ - int retval; - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; - - if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { - if (ifx_dev->gpio.unack_srdy_int_nb > 0) - ifx_dev->gpio.unack_srdy_int_nb--; - - ifx_spi_prepare_tx_buffer(ifx_dev); - - spi_message_init(&ifx_dev->spi_msg); - INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); - - ifx_dev->spi_msg.context = ifx_dev; - ifx_dev->spi_msg.complete = ifx_spi_complete; - - /* set up our spi transfer */ - /* note len is BYTES, not transfers */ - ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; - ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; - /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; - - ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; - ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; - - /* - * setup dma pointers - */ - if (ifx_dev->is_6160) { - ifx_dev->spi_msg.is_dma_mapped = 1; - ifx_dev->tx_dma = ifx_dev->tx_bus; - ifx_dev->rx_dma = ifx_dev->rx_bus; - ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; - ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; - } else { - ifx_dev->spi_msg.is_dma_mapped = 0; - ifx_dev->tx_dma = (dma_addr_t)0; - ifx_dev->rx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; - } - - spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); - - /* Assert MRDY. This may have already been done by the write - * routine. - */ - mrdy_assert(ifx_dev); - - retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); - if (retval) { - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, - &ifx_dev->flags); - tasklet_schedule(&ifx_dev->io_work_tasklet); - return; - } - } else - ifx_dev->write_pending = 1; -} - -/** - * ifx_spi_free_port - free up the tty side - * @ifx_dev: IFX device going away - * - * Unregister and free up a port when the device goes away - */ -static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) -{ - if (ifx_dev->tty_dev) - tty_unregister_device(tty_drv, ifx_dev->minor); - kfifo_free(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_create_port - create a new port - * @ifx_dev: our spi device - * - * Allocate and initialise the tty port that goes with this interface - * and add it to the tty layer so that it can be opened. - */ -static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) -{ - int ret = 0; - struct tty_port *pport = &ifx_dev->tty_port; - - spin_lock_init(&ifx_dev->fifo_lock); - lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, - &ifx_spi_key, 0); - - if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { - ret = -ENOMEM; - goto error_ret; - } - - pport->ops = &ifx_tty_port_ops; - tty_port_init(pport); - ifx_dev->minor = IFX_SPI_TTY_ID; - ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, - &ifx_dev->spi_dev->dev); - if (IS_ERR(ifx_dev->tty_dev)) { - dev_dbg(&ifx_dev->spi_dev->dev, - "%s: registering tty device failed", __func__); - ret = PTR_ERR(ifx_dev->tty_dev); - goto error_ret; - } - return 0; - -error_ret: - ifx_spi_free_port(ifx_dev); - return ret; -} - -/** - * ifx_spi_handle_srdy - handle SRDY - * @ifx_dev: device asserting SRDY - * - * Check our device state and see what we need to kick off when SRDY - * is asserted. This usually means killing the timer and firing off the - * I/O processing. - */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) -{ - if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - del_timer_sync(&ifx_dev->spi_timer); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - } - - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); - - if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else - set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); -} - -/** - * ifx_spi_srdy_interrupt - SRDY asserted - * @irq: our IRQ number - * @dev: our ifx device - * - * The modem asserted SRDY. Handle the srdy event - */ -static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - ifx_dev->gpio.unack_srdy_int_nb++; - ifx_spi_handle_srdy(ifx_dev); - return IRQ_HANDLED; -} - -/** - * ifx_spi_reset_interrupt - Modem has changed reset state - * @irq: interrupt number - * @dev: our device pointer - * - * The modem has either entered or left reset state. Check the GPIO - * line to see which. - * - * FIXME: review locking on MR_INPROGRESS versus - * parallel unsolicited reset/solicited reset - */ -static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - int val = gpio_get_value(ifx_dev->gpio.reset_out); - int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); - - if (val == 0) { - /* entered reset */ - set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (!solreset) { - /* unsolicited reset */ - ifx_spi_ttyhangup(ifx_dev); - } - } else { - /* exited reset */ - clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (solreset) { - set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); - wake_up(&ifx_dev->mdm_reset_wait); - } - } - return IRQ_HANDLED; -} - -/** - * ifx_spi_free_device - free device - * @ifx_dev: device to free - * - * Free the IFX device - */ -static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) -{ - ifx_spi_free_port(ifx_dev); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->tx_buffer, - ifx_dev->tx_bus); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->rx_buffer, - ifx_dev->rx_bus); -} - -/** - * ifx_spi_reset - reset modem - * @ifx_dev: modem to reset - * - * Perform a reset on the modem - */ -static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) -{ - int ret; - /* - * set up modem power, reset - * - * delays are required on some platforms for the modem - * to reset properly - */ - set_bit(MR_START, &ifx_dev->mdm_reset_state); - gpio_set_value(ifx_dev->gpio.po, 0); - gpio_set_value(ifx_dev->gpio.reset, 0); - msleep(25); - gpio_set_value(ifx_dev->gpio.reset, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 0); - ret = wait_event_timeout(ifx_dev->mdm_reset_wait, - test_bit(MR_COMPLETE, - &ifx_dev->mdm_reset_state), - IFX_RESET_TIMEOUT); - if (!ret) - dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", - ifx_dev->mdm_reset_state); - - ifx_dev->mdm_reset_state = 0; - return ret; -} - -/** - * ifx_spi_spi_probe - probe callback - * @spi: our possible matching SPI device - * - * Probe for a 6x60 modem on SPI bus. Perform any needed device and - * GPIO setup. - * - * FIXME: - * - Support for multiple devices - * - Split out MID specific GPIO handling eventually - */ - -static int ifx_spi_spi_probe(struct spi_device *spi) -{ - int ret; - int srdy; - struct ifx_modem_platform_data *pl_data = NULL; - struct ifx_spi_device *ifx_dev; - - if (saved_ifx_dev) { - dev_dbg(&spi->dev, "ignoring subsequent detection"); - return -ENODEV; - } - - /* initialize structure to hold our device variables */ - ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); - if (!ifx_dev) { - dev_err(&spi->dev, "spi device allocation failed"); - return -ENOMEM; - } - saved_ifx_dev = ifx_dev; - ifx_dev->spi_dev = spi; - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); - spin_lock_init(&ifx_dev->write_lock); - spin_lock_init(&ifx_dev->power_lock); - ifx_dev->power_status = 0; - init_timer(&ifx_dev->spi_timer); - ifx_dev->spi_timer.function = ifx_spi_timeout; - ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; - - /* ensure SPI protocol flags are initialized to enable transfer */ - ifx_dev->spi_more = 0; - ifx_dev->spi_slave_cts = 0; - - /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->tx_bus, - GFP_KERNEL); - if (!ifx_dev->tx_buffer) { - dev_err(&spi->dev, "DMA-TX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->rx_bus, - GFP_KERNEL); - if (!ifx_dev->rx_buffer) { - dev_err(&spi->dev, "DMA-RX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - - /* initialize waitq for modem reset */ - init_waitqueue_head(&ifx_dev->mdm_reset_wait); - - spi_set_drvdata(spi, ifx_dev); - tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io, - (unsigned long)ifx_dev); - - set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); - - /* create our tty port */ - ret = ifx_spi_create_port(ifx_dev); - if (ret != 0) { - dev_err(&spi->dev, "create default tty port failed"); - goto error_ret; - } - - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } - - dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", - ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, - ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); - - /* Configure gpios */ - ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)", - ifx_dev->gpio.reset); - goto error_ret; - } - ret += gpio_direction_output(ifx_dev->gpio.reset, 0); - ret += gpio_export(ifx_dev->gpio.reset, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)", - ifx_dev->gpio.reset); - ret = -EBUSY; - goto error_ret2; - } - - ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); - ret += gpio_direction_output(ifx_dev->gpio.po, 0); - ret += gpio_export(ifx_dev->gpio.po, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (ON)", - ifx_dev->gpio.po); - ret = -EBUSY; - goto error_ret3; - } - - ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - goto error_ret3; - } - ret += gpio_export(ifx_dev->gpio.mrdy, 1); - ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - ret = -EBUSY; - goto error_ret4; - } - - ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret4; - } - ret += gpio_export(ifx_dev->gpio.srdy, 1); - ret += gpio_direction_input(ifx_dev->gpio.srdy); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret5; - } - - ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - goto error_ret5; - } - ret += gpio_export(ifx_dev->gpio.reset_out, 1); - ret += gpio_direction_input(ifx_dev->gpio.reset_out); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - ret = -EBUSY; - goto error_ret6; - } - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), - ifx_spi_reset_interrupt, - IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x\n", - gpio_to_irq(ifx_dev->gpio.reset_out)); - goto error_ret6; - } - - ret = ifx_spi_reset(ifx_dev); - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), - ifx_spi_srdy_interrupt, - IRQF_TRIGGER_RISING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x", - gpio_to_irq(ifx_dev->gpio.srdy)); - goto error_ret7; - } - - /* set pm runtime power state and register with power system */ - pm_runtime_set_active(&spi->dev); - pm_runtime_enable(&spi->dev); - - /* handle case that modem is already signaling SRDY */ - /* no outgoing tty open at this point, this just satisfies the - * modem's read and should reset communication properly - */ - srdy = gpio_get_value(ifx_dev->gpio.srdy); - - if (srdy) { - mrdy_assert(ifx_dev); - ifx_spi_handle_srdy(ifx_dev); - } else - mrdy_set_low(ifx_dev); - return 0; - -error_ret7: - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); -error_ret6: - gpio_free(ifx_dev->gpio.srdy); -error_ret5: - gpio_free(ifx_dev->gpio.mrdy); -error_ret4: - gpio_free(ifx_dev->gpio.reset); -error_ret3: - gpio_free(ifx_dev->gpio.po); -error_ret2: - gpio_free(ifx_dev->gpio.reset_out); -error_ret: - ifx_spi_free_device(ifx_dev); - saved_ifx_dev = NULL; - return ret; -} - -/** - * ifx_spi_spi_remove - SPI device was removed - * @spi: SPI device - * - * FIXME: We should be shutting the device down here not in - * the module unload path. - */ - -static int ifx_spi_spi_remove(struct spi_device *spi) -{ - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - /* stop activity */ - tasklet_kill(&ifx_dev->io_work_tasklet); - /* free irq */ - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); - free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); - - gpio_free(ifx_dev->gpio.srdy); - gpio_free(ifx_dev->gpio.mrdy); - gpio_free(ifx_dev->gpio.reset); - gpio_free(ifx_dev->gpio.po); - gpio_free(ifx_dev->gpio.reset_out); - - /* free allocations */ - ifx_spi_free_device(ifx_dev); - - saved_ifx_dev = NULL; - return 0; -} - -/** - * ifx_spi_spi_shutdown - called on SPI shutdown - * @spi: SPI device - * - * No action needs to be taken here - */ - -static void ifx_spi_spi_shutdown(struct spi_device *spi) -{ -} - -/* - * various suspends and resumes have nothing to do - * no hardware to save state for - */ - -/** - * ifx_spi_spi_suspend - suspend SPI on system suspend - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg) -{ - return 0; -} - -/** - * ifx_spi_spi_resume - resume SPI side on system resume - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_resume(struct spi_device *spi) -{ - return 0; -} - -/** - * ifx_spi_pm_suspend - suspend modem on system suspend - * @dev: device being suspended - * - * Suspend the modem. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_pm_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_resume - resume modem on system resume - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - * - * FIXME: do we need to reset anything here ? - */ -static int ifx_spi_pm_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_resume - suspend modem - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - */ -static int ifx_spi_pm_runtime_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_suspend - suspend modem - * @dev: device being suspended - * - * Allow the modem to suspend and thus suspend to continue up the - * device tree. - */ -static int ifx_spi_pm_runtime_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_idle - check if modem idle - * @dev: our device - * - * Check conditions and queue runtime suspend if idle. - */ -static int ifx_spi_pm_runtime_idle(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - - if (!ifx_dev->power_status) - pm_runtime_suspend(dev); - - return 0; -} - -static const struct dev_pm_ops ifx_spi_pm = { - .resume = ifx_spi_pm_resume, - .suspend = ifx_spi_pm_suspend, - .runtime_resume = ifx_spi_pm_runtime_resume, - .runtime_suspend = ifx_spi_pm_runtime_suspend, - .runtime_idle = ifx_spi_pm_runtime_idle -}; - -static const struct spi_device_id ifx_id_table[] = { - {"ifx6160", 0}, - {"ifx6260", 0}, - { } -}; -MODULE_DEVICE_TABLE(spi, ifx_id_table); - -/* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { - .driver = { - .name = "ifx6160", - .bus = &spi_bus_type, - .pm = &ifx_spi_pm, - .owner = THIS_MODULE}, - .probe = ifx_spi_spi_probe, - .shutdown = ifx_spi_spi_shutdown, - .remove = __devexit_p(ifx_spi_spi_remove), - .suspend = ifx_spi_spi_suspend, - .resume = ifx_spi_spi_resume, - .id_table = ifx_id_table -}; - -/** - * ifx_spi_exit - module exit - * - * Unload the module. - */ - -static void __exit ifx_spi_exit(void) -{ - /* unregister */ - tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); -} - -/** - * ifx_spi_init - module entry point - * - * Initialise the SPI and tty interfaces for the IFX SPI driver - * We need to initialize upper-edge spi driver after the tty - * driver because otherwise the spi probe will race - */ - -static int __init ifx_spi_init(void) -{ - int result; - - tty_drv = alloc_tty_driver(1); - if (!tty_drv) { - pr_err("%s: alloc_tty_driver failed", DRVNAME); - return -ENOMEM; - } - - tty_drv->magic = TTY_DRIVER_MAGIC; - tty_drv->owner = THIS_MODULE; - tty_drv->driver_name = DRVNAME; - tty_drv->name = TTYNAME; - tty_drv->minor_start = IFX_SPI_TTY_ID; - tty_drv->num = 1; - tty_drv->type = TTY_DRIVER_TYPE_SERIAL; - tty_drv->subtype = SERIAL_TYPE_NORMAL; - tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_drv->init_termios = tty_std_termios; - - tty_set_operations(tty_drv, &ifx_spi_serial_ops); - - result = tty_register_driver(tty_drv); - if (result) { - pr_err("%s: tty_register_driver failed(%d)", - DRVNAME, result); - put_tty_driver(tty_drv); - return result; - } - - result = spi_register_driver((void *)&ifx_spi_driver_6160); - if (result) { - pr_err("%s: spi_register_driver failed(%d)", - DRVNAME, result); - tty_unregister_driver(tty_drv); - } - return result; -} - -module_init(ifx_spi_init); -module_exit(ifx_spi_exit); - -MODULE_AUTHOR("Intel"); -MODULE_DESCRIPTION("IFX6x60 spi driver"); -MODULE_LICENSE("GPL"); -MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/serial/ifx6x60.h b/drivers/serial/ifx6x60.h deleted file mode 100644 index deb7b8d..0000000 --- a/drivers/serial/ifx6x60.h +++ /dev/null @@ -1,129 +0,0 @@ -/**************************************************************************** - * - * Driver for the IFX spi modem. - * - * Copyright (C) 2009, 2010 Intel Corp - * Jim Stanley - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - * - * - *****************************************************************************/ -#ifndef _IFX6X60_H -#define _IFX6X60_H - -#define DRVNAME "ifx6x60" -#define TTYNAME "ttyIFX" - -/* #define IFX_THROTTLE_CODE */ - -#define IFX_SPI_MAX_MINORS 1 -#define IFX_SPI_TRANSFER_SIZE 2048 -#define IFX_SPI_FIFO_SIZE 4096 - -#define IFX_SPI_HEADER_OVERHEAD 4 -#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) - -/* device flags bitfield definitions */ -#define IFX_SPI_STATE_PRESENT 0 -#define IFX_SPI_STATE_IO_IN_PROGRESS 1 -#define IFX_SPI_STATE_IO_READY 2 -#define IFX_SPI_STATE_TIMER_PENDING 3 - -/* flow control bitfields */ -#define IFX_SPI_DCD 0 -#define IFX_SPI_CTS 1 -#define IFX_SPI_DSR 2 -#define IFX_SPI_RI 3 -#define IFX_SPI_DTR 4 -#define IFX_SPI_RTS 5 -#define IFX_SPI_TX_FC 6 -#define IFX_SPI_RX_FC 7 -#define IFX_SPI_UPDATE 8 - -#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ - IFX_SPI_HEADER_OVERHEAD) - -#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING -#define IFX_SPI_GPIO_TARGET 0 -#define IFX_SPI_GPIO0 0x105 - -#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) - -/* values for bits in power status byte */ -#define IFX_SPI_POWER_DATA_PENDING 1 -#define IFX_SPI_POWER_SRDY 2 - -struct ifx_spi_device { - /* Our SPI device */ - struct spi_device *spi_dev; - - /* Port specific data */ - struct kfifo tx_fifo; - spinlock_t fifo_lock; - unsigned long signal_state; - - /* TTY Layer logic */ - struct tty_port tty_port; - struct device *tty_dev; - int minor; - - /* Low level I/O work */ - struct tasklet_struct io_work_tasklet; - unsigned long flags; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - - int is_6160; /* Modem type */ - - spinlock_t write_lock; - int write_pending; - spinlock_t power_lock; - unsigned char power_status; - - unsigned char *rx_buffer; - unsigned char *tx_buffer; - dma_addr_t rx_bus; - dma_addr_t tx_bus; - unsigned char spi_more; - unsigned char spi_slave_cts; - - struct timer_list spi_timer; - - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - struct { - /* gpio lines */ - unsigned short srdy; /* slave-ready gpio */ - unsigned short mrdy; /* master-ready gpio */ - unsigned short reset; /* modem-reset gpio */ - unsigned short po; /* modem-on gpio */ - unsigned short reset_out; /* modem-in-reset gpio */ - /* state/stats */ - int unack_srdy_int_nb; - } gpio; - - /* modem reset */ - unsigned long mdm_reset_state; -#define MR_START 0 -#define MR_INPROGRESS 1 -#define MR_COMPLETE 2 - wait_queue_head_t mdm_reset_wait; -}; - -#endif /* _IFX6X60_H */ diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c deleted file mode 100644 index dfcf4b1..0000000 --- a/drivers/serial/imx.c +++ /dev/null @@ -1,1380 +0,0 @@ -/* - * linux/drivers/serial/imx.c - * - * Driver for Motorola IMX serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Author: Sascha Hauer - * Copyright (C) 2004 Pengutronix - * - * Copyright (C) 2009 emlix GmbH - * Author: Fabian Godehardt (added IrDA support for iMX) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * [29-Mar-2005] Mike Lee - * Added hardware handshake - */ - -#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Register definitions */ -#define URXD0 0x0 /* Receiver Register */ -#define URTX0 0x40 /* Transmitter Register */ -#define UCR1 0x80 /* Control Register 1 */ -#define UCR2 0x84 /* Control Register 2 */ -#define UCR3 0x88 /* Control Register 3 */ -#define UCR4 0x8c /* Control Register 4 */ -#define UFCR 0x90 /* FIFO Control Register */ -#define USR1 0x94 /* Status Register 1 */ -#define USR2 0x98 /* Status Register 2 */ -#define UESC 0x9c /* Escape Character Register */ -#define UTIM 0xa0 /* Escape Timer Register */ -#define UBIR 0xa4 /* BRM Incremental Register */ -#define UBMR 0xa8 /* BRM Modulator Register */ -#define UBRC 0xac /* Baud Rate Count Register */ -#define MX2_ONEMS 0xb0 /* One Millisecond register */ -#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ -#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ -#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ -#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_IMX_MAJOR 207 -#define MINOR_START 16 -#define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -#define DRIVER_NAME "IMX-uart" - -#define UART_NR 8 - -struct imx_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; - int txirq,rxirq,rtsirq; - unsigned int have_rtscts:1; - unsigned int use_irda:1; - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short trcv_delay; /* transceiver delay */ - struct clk *clk; -}; - -#ifdef CONFIG_IRDA -#define USE_IRDA(sport) ((sport)->use_irda) -#else -#define USE_IRDA(sport) (0) -#endif - -/* - * Handle any change of modem status signal since we were last called. - */ -static void imx_mctrl_check(struct imx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void imx_timeout(unsigned long data) -{ - struct imx_port *sport = (struct imx_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - imx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - if (USE_IRDA(sport)) { - /* half duplex - wait for end of transmission */ - int n = 256; - while ((--n > 0) && - !(readl(sport->port.membase + USR2) & USR2_TXDC)) { - udelay(5); - barrier(); - } - /* - * irda transceiver - wait a bit more to avoid - * cutoff, hardware dependent - */ - udelay(sport->trcv_delay); - - /* - * half duplex - reactivate receive mode, - * flush receive pipe echo crap - */ - if (readl(sport->port.membase + USR2) & USR2_TXDC) { - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp &= ~(UCR4_TCEN); - writel(temp, sport->port.membase + UCR4); - - while (readl(sport->port.membase + URXD0) & - URXD_CHARRDY) - barrier(); - - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN; - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_DREN; - writel(temp, sport->port.membase + UCR4); - } - return; - } - - temp = readl(sport->port.membase + UCR1); - writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_rx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2); - writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void imx_enable_ms(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static inline void imx_transmit_buffer(struct imx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - while (!uart_circ_empty(xmit) && - !(readl(sport->port.membase + UTS) & UTS_TXFULL)) { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - imx_stop_tx(&sport->port); -} - -/* - * interrupts disabled on entry - */ -static void imx_start_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - if (USE_IRDA(sport)) { - /* half duplex in IrDA mode; have to disable receive mode */ - temp = readl(sport->port.membase + UCR4); - temp &= ~(UCR4_DREN); - writel(temp, sport->port.membase + UCR4); - - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_RRDYEN); - writel(temp, sport->port.membase + UCR1); - } - - temp = readl(sport->port.membase + UCR1); - writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); - - if (USE_IRDA(sport)) { - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_TRDYEN; - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_TCEN; - writel(temp, sport->port.membase + UCR4); - } - - if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) - imx_transmit_buffer(sport); -} - -static irqreturn_t imx_rtsint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock, flags); - - writel(USR1_RTSD, sport->port.membase + USR1); - uart_handle_cts_change(&sport->port, !!val); - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); - - spin_unlock_irqrestore(&sport->port.lock, flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_txint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - struct circ_buf *xmit = &sport->port.state->xmit; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock,flags); - if (sport->port.x_char) - { - /* Send next char */ - writel(sport->port.x_char, sport->port.membase + URTX0); - goto out; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - imx_stop_tx(&sport->port); - goto out; - } - - imx_transmit_buffer(sport); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_rxint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int rx,flg,ignored = 0; - struct tty_struct *tty = sport->port.state->port.tty; - unsigned long flags, temp; - - spin_lock_irqsave(&sport->port.lock,flags); - - while (readl(sport->port.membase + USR2) & USR2_RDR) { - flg = TTY_NORMAL; - sport->port.icount.rx++; - - rx = readl(sport->port.membase + URXD0); - - temp = readl(sport->port.membase + USR2); - if (temp & USR2_BRCD) { - writel(USR2_BRCD, sport->port.membase + USR2); - if (uart_handle_break(&sport->port)) - continue; - } - - if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) - continue; - - if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { - if (rx & URXD_PRERR) - sport->port.icount.parity++; - else if (rx & URXD_FRMERR) - sport->port.icount.frame++; - if (rx & URXD_OVRRUN) - sport->port.icount.overrun++; - - if (rx & sport->port.ignore_status_mask) { - if (++ignored > 100) - goto out; - continue; - } - - rx &= sport->port.read_status_mask; - - if (rx & URXD_PRERR) - flg = TTY_PARITY; - else if (rx & URXD_FRMERR) - flg = TTY_FRAME; - if (rx & URXD_OVRRUN) - flg = TTY_OVERRUN; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - tty_insert_flip_char(tty, rx, flg); - } - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - -static irqreturn_t imx_int(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int sts; - - sts = readl(sport->port.membase + USR1); - - if (sts & USR1_RRDY) - imx_rxint(irq, dev_id); - - if (sts & USR1_TRDY && - readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) - imx_txint(irq, dev_id); - - if (sts & USR1_RTSD) - imx_rtsint(irq, dev_id); - - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int imx_tx_empty(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; -} - -/* - * We have a modem side uart, so the meanings of RTS and CTS are inverted. - */ -static unsigned int imx_get_mctrl(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; - - if (readl(sport->port.membase + USR1) & USR1_RTSS) - tmp |= TIOCM_CTS; - - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; - - return tmp; -} - -static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - - if (mctrl & TIOCM_RTS) - temp |= UCR2_CTS; - - writel(temp, sport->port.membase + UCR2); -} - -/* - * Interrupts always disabled. - */ -static void imx_break_ctl(struct uart_port *port, int break_state) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags, temp; - - spin_lock_irqsave(&sport->port.lock, flags); - - temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; - - if ( break_state != 0 ) - temp |= UCR1_SNDBRK; - - writel(temp, sport->port.membase + UCR1); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -#define TXTL 2 /* reset default */ -#define RXTL 1 /* reset default */ - -static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) -{ - unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); - - writel(val, sport->port.membase + UFCR); - - return 0; -} - -/* half the RX buffer size */ -#define CTSTL 16 - -static int imx_startup(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - int retval; - unsigned long flags, temp; - - imx_setup_ufcr(sport, 0); - - /* disable the DREN bit (Data Ready interrupt enable) before - * requesting IRQs - */ - temp = readl(sport->port.membase + UCR4); - - if (USE_IRDA(sport)) - temp |= UCR4_IRSC; - - /* set the trigger level for CTS */ - temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF); - temp |= CTSTL<< UCR4_CTSTL_SHF; - - writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); - - if (USE_IRDA(sport)) { - /* reset fifo's and state machines */ - int i = 100; - temp = readl(sport->port.membase + UCR2); - temp &= ~UCR2_SRST; - writel(temp, sport->port.membase + UCR2); - while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && - (--i > 0)) { - udelay(1); - } - } - - /* - * Allocate the IRQ(s) i.MX1 has three interrupts whereas later - * chips only have one interrupt. - */ - if (sport->txirq > 0) { - retval = request_irq(sport->rxirq, imx_rxint, 0, - DRIVER_NAME, sport); - if (retval) - goto error_out1; - - retval = request_irq(sport->txirq, imx_txint, 0, - DRIVER_NAME, sport); - if (retval) - goto error_out2; - - /* do not use RTS IRQ on IrDA */ - if (!USE_IRDA(sport)) { - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) - goto error_out3; - } - } else { - retval = request_irq(sport->port.irq, imx_int, 0, - DRIVER_NAME, sport); - if (retval) { - free_irq(sport->port.irq, sport); - goto error_out1; - } - } - - /* - * Finally, clear and enable interrupts - */ - writel(USR1_RTSD, sport->port.membase + USR1); - - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; - - if (USE_IRDA(sport)) { - temp |= UCR1_IREN; - temp &= ~(UCR1_RTSDEN); - } - - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR2); - temp |= (UCR2_RXEN | UCR2_TXEN); - writel(temp, sport->port.membase + UCR2); - - if (USE_IRDA(sport)) { - /* clear RX-FIFO */ - int i = 64; - while ((--i > 0) && - (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { - barrier(); - } - } - - if (!cpu_is_mx1()) { - temp = readl(sport->port.membase + UCR3); - temp |= MX2_UCR3_RXDMUXSEL; - writel(temp, sport->port.membase + UCR3); - } - - if (USE_IRDA(sport)) { - temp = readl(sport->port.membase + UCR4); - if (sport->irda_inv_rx) - temp |= UCR4_INVR; - else - temp &= ~(UCR4_INVR); - writel(temp | UCR4_DREN, sport->port.membase + UCR4); - - temp = readl(sport->port.membase + UCR3); - if (sport->irda_inv_tx) - temp |= UCR3_INVT; - else - temp &= ~(UCR3_INVT); - writel(temp, sport->port.membase + UCR3); - } - - /* - * Enable modem status interrupts - */ - spin_lock_irqsave(&sport->port.lock,flags); - imx_enable_ms(&sport->port); - spin_unlock_irqrestore(&sport->port.lock,flags); - - if (USE_IRDA(sport)) { - struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; - sport->irda_inv_rx = pdata->irda_inv_rx; - sport->irda_inv_tx = pdata->irda_inv_tx; - sport->trcv_delay = pdata->transceiver_delay; - if (pdata->irda_enable) - pdata->irda_enable(1); - } - - return 0; - -error_out3: - if (sport->txirq) - free_irq(sport->txirq, sport); -error_out2: - if (sport->rxirq) - free_irq(sport->rxirq, sport); -error_out1: - return retval; -} - -static void imx_shutdown(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2); - temp &= ~(UCR2_TXEN); - writel(temp, sport->port.membase + UCR2); - - if (USE_IRDA(sport)) { - struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; - if (pdata->irda_enable) - pdata->irda_enable(0); - } - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Free the interrupts - */ - if (sport->txirq > 0) { - if (!USE_IRDA(sport)) - free_irq(sport->rtsirq, sport); - free_irq(sport->txirq, sport); - free_irq(sport->rxirq, sport); - } else - free_irq(sport->port.irq, sport); - - /* - * Disable all interrupts, port and break condition. - */ - - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); - if (USE_IRDA(sport)) - temp &= ~(UCR1_IREN); - - writel(temp, sport->port.membase + UCR1); -} - -static void -imx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags; - unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int div, ufcr; - unsigned long num, denom; - uint64_t tdiv64; - - /* - * If we don't support modem control lines, don't allow - * these to be set. - */ - if (0) { - termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); - termios->c_cflag |= CLOCAL; - } - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; - else - ucr2 = UCR2_SRST | UCR2_IRTS; - - if (termios->c_cflag & CRTSCTS) { - if( sport->have_rtscts ) { - ucr2 &= ~UCR2_IRTS; - ucr2 |= UCR2_CTSC; - } else { - termios->c_cflag &= ~CRTSCTS; - } - } - - if (termios->c_cflag & CSTOPB) - ucr2 |= UCR2_STPB; - if (termios->c_cflag & PARENB) { - ucr2 |= UCR2_PREN; - if (termios->c_cflag & PARODD) - ucr2 |= UCR2_PROE; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = 0; - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= URXD_BRK; - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_PRERR; - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= URXD_BRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_OVRRUN; - } - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ucr1 = readl(sport->port.membase + UCR1); - writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), - sport->port.membase + UCR1); - - while ( !(readl(sport->port.membase + USR2) & USR2_TXDC)) - barrier(); - - /* then, disable everything */ - old_txrxen = readl(sport->port.membase + UCR2); - writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN), - sport->port.membase + UCR2); - old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - - if (USE_IRDA(sport)) { - /* - * use maximum available submodule frequency to - * avoid missing short pulses due to low sampling rate - */ - div = 1; - } else { - div = sport->port.uartclk / (baud * 16); - if (div > 7) - div = 7; - if (!div) - div = 1; - } - - rational_best_approximation(16 * div * baud, sport->port.uartclk, - 1 << 16, 1 << 16, &num, &denom); - - tdiv64 = sport->port.uartclk; - tdiv64 *= num; - do_div(tdiv64, denom * 16 * div); - tty_termios_encode_baud_rate(termios, - (speed_t)tdiv64, (speed_t)tdiv64); - - num -= 1; - denom -= 1; - - ufcr = readl(sport->port.membase + UFCR); - ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); - writel(ufcr, sport->port.membase + UFCR); - - writel(num, sport->port.membase + UBIR); - writel(denom, sport->port.membase + UBMR); - - if (!cpu_is_mx1()) - writel(sport->port.uartclk / div / 1000, - sport->port.membase + MX2_ONEMS); - - writel(old_ucr1, sport->port.membase + UCR1); - - /* set the parity, stop bits and data size */ - writel(ucr2 | old_txrxen, sport->port.membase + UCR2); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - imx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *imx_type(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return sport->port.type == PORT_IMX ? "IMX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void imx_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mmres->start, mmres->end - mmres->start + 1); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int imx_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - void *ret; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mmres) - return -ENODEV; - - ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1, - "imx-uart"); - - return ret ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void imx_config_port(struct uart_port *port, int flags) -{ - struct imx_port *sport = (struct imx_port *)port; - - if (flags & UART_CONFIG_TYPE && - imx_request_port(&sport->port) == 0) - sport->port.type = PORT_IMX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_IMX and PORT_UNKNOWN - */ -static int -imx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct imx_port *sport = (struct imx_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != UPIO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops imx_pops = { - .tx_empty = imx_tx_empty, - .set_mctrl = imx_set_mctrl, - .get_mctrl = imx_get_mctrl, - .stop_tx = imx_stop_tx, - .start_tx = imx_start_tx, - .stop_rx = imx_stop_rx, - .enable_ms = imx_enable_ms, - .break_ctl = imx_break_ctl, - .startup = imx_startup, - .shutdown = imx_shutdown, - .set_termios = imx_set_termios, - .type = imx_type, - .release_port = imx_release_port, - .request_port = imx_request_port, - .config_port = imx_config_port, - .verify_port = imx_verify_port, -}; - -static struct imx_port *imx_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_IMX_CONSOLE -static void imx_console_putchar(struct uart_port *port, int ch) -{ - struct imx_port *sport = (struct imx_port *)port; - - while (readl(sport->port.membase + UTS) & UTS_TXFULL) - barrier(); - - writel(ch, sport->port.membase + URTX0); -} - -/* - * Interrupts are disabled on entering - */ -static void -imx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct imx_port *sport = imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2, ucr1; - - /* - * First, save UCR1/2 and then disable interrupts - */ - ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); - old_ucr2 = readl(sport->port.membase + UCR2); - - if (cpu_is_mx1()) - ucr1 |= MX1_UCR1_UARTCLKEN; - ucr1 |= UCR1_UARTEN; - ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); - - writel(ucr1, sport->port.membase + UCR1); - - writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); - - uart_console_write(&sport->port, s, count, imx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore UCR1/2 - */ - while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); - - writel(old_ucr1, sport->port.membase + UCR1); - writel(old_ucr2, sport->port.membase + UCR2); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -imx_console_get_options(struct imx_port *sport, int *baud, - int *parity, int *bits) -{ - - if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { - /* ok, the port was enabled */ - unsigned int ucr2, ubir,ubmr, uartclk; - unsigned int baud_raw; - unsigned int ucfr_rfdiv; - - ucr2 = readl(sport->port.membase + UCR2); - - *parity = 'n'; - if (ucr2 & UCR2_PREN) { - if (ucr2 & UCR2_PROE) - *parity = 'o'; - else - *parity = 'e'; - } - - if (ucr2 & UCR2_WS) - *bits = 8; - else - *bits = 7; - - ubir = readl(sport->port.membase + UBIR) & 0xffff; - ubmr = readl(sport->port.membase + UBMR) & 0xffff; - - ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; - if (ucfr_rfdiv == 6) - ucfr_rfdiv = 7; - else - ucfr_rfdiv = 6 - ucfr_rfdiv; - - uartclk = clk_get_rate(sport->clk); - uartclk /= ucfr_rfdiv; - - { /* - * The next code provides exact computation of - * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) - * without need of float support or long long division, - * which would be required to prevent 32bit arithmetic overflow - */ - unsigned int mul = ubir + 1; - unsigned int div = 16 * (ubmr + 1); - unsigned int rem = uartclk % div; - - baud_raw = (uartclk / div) * mul; - baud_raw += (rem * mul + div / 2) / div; - *baud = (baud_raw + 50) / 100 * 100; - } - - if(*baud != baud_raw) - printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n", - baud_raw, *baud); - } -} - -static int __init -imx_console_setup(struct console *co, char *options) -{ - struct imx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) - co->index = 0; - sport = imx_ports[co->index]; - if(sport == NULL) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - imx_console_get_options(sport, &baud, &parity, &bits); - - imx_setup_ufcr(sport, 0); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver imx_reg; -static struct console imx_console = { - .name = DEV_NAME, - .write = imx_console_write, - .device = uart_console_device, - .setup = imx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &imx_reg, -}; - -#define IMX_CONSOLE &imx_console -#else -#define IMX_CONSOLE NULL -#endif - -static struct uart_driver imx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = DEV_NAME, - .major = SERIAL_IMX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(imx_ports), - .cons = IMX_CONSOLE, -}; - -static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_suspend_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_resume(struct platform_device *dev) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_resume_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_probe(struct platform_device *pdev) -{ - struct imx_port *sport; - struct imxuart_platform_data *pdata; - void __iomem *base; - int ret = 0; - struct resource *res; - - sport = kzalloc(sizeof(*sport), GFP_KERNEL); - if (!sport) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto free; - } - - base = ioremap(res->start, PAGE_SIZE); - if (!base) { - ret = -ENOMEM; - goto free; - } - - sport->port.dev = &pdev->dev; - sport->port.mapbase = res->start; - sport->port.membase = base; - sport->port.type = PORT_IMX, - sport->port.iotype = UPIO_MEM; - sport->port.irq = platform_get_irq(pdev, 0); - sport->rxirq = platform_get_irq(pdev, 0); - sport->txirq = platform_get_irq(pdev, 1); - sport->rtsirq = platform_get_irq(pdev, 2); - sport->port.fifosize = 32; - sport->port.ops = &imx_pops; - sport->port.flags = UPF_BOOT_AUTOCONF; - sport->port.line = pdev->id; - init_timer(&sport->timer); - sport->timer.function = imx_timeout; - sport->timer.data = (unsigned long)sport; - - sport->clk = clk_get(&pdev->dev, "uart"); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); - goto unmap; - } - clk_enable(sport->clk); - - sport->port.uartclk = clk_get_rate(sport->clk); - - imx_ports[pdev->id] = sport; - - pdata = pdev->dev.platform_data; - if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - sport->have_rtscts = 1; - -#ifdef CONFIG_IRDA - if (pdata && (pdata->flags & IMXUART_IRDA)) - sport->use_irda = 1; -#endif - - if (pdata && pdata->init) { - ret = pdata->init(pdev); - if (ret) - goto clkput; - } - - ret = uart_add_one_port(&imx_reg, &sport->port); - if (ret) - goto deinit; - platform_set_drvdata(pdev, &sport->port); - - return 0; -deinit: - if (pdata && pdata->exit) - pdata->exit(pdev); -clkput: - clk_put(sport->clk); - clk_disable(sport->clk); -unmap: - iounmap(sport->port.membase); -free: - kfree(sport); - - return ret; -} - -static int serial_imx_remove(struct platform_device *pdev) -{ - struct imxuart_platform_data *pdata; - struct imx_port *sport = platform_get_drvdata(pdev); - - pdata = pdev->dev.platform_data; - - platform_set_drvdata(pdev, NULL); - - if (sport) { - uart_remove_one_port(&imx_reg, &sport->port); - clk_put(sport->clk); - } - - clk_disable(sport->clk); - - if (pdata && pdata->exit) - pdata->exit(pdev); - - iounmap(sport->port.membase); - kfree(sport); - - return 0; -} - -static struct platform_driver serial_imx_driver = { - .probe = serial_imx_probe, - .remove = serial_imx_remove, - - .suspend = serial_imx_suspend, - .resume = serial_imx_resume, - .driver = { - .name = "imx-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init imx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: IMX driver\n"); - - ret = uart_register_driver(&imx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_imx_driver); - if (ret != 0) - uart_unregister_driver(&imx_reg); - - return 0; -} - -static void __exit imx_serial_exit(void) -{ - platform_driver_unregister(&serial_imx_driver); - uart_unregister_driver(&imx_reg); -} - -module_init(imx_serial_init); -module_exit(imx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("IMX generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c deleted file mode 100644 index ee43efc..0000000 --- a/drivers/serial/ioc3_serial.c +++ /dev/null @@ -1,2199 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* - * This file contains a module version of the ioc3 serial driver. This - * includes all the support functions needed (support functions, etc.) - * and the serial driver itself. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Interesting things about the ioc3 - */ - -#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */ -#define PORTS_PER_CARD 2 -#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS) -#define MAX_CARDS 8 -#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS) - -/* determine given the sio_ir what port it applies to */ -#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1 - - -/* - * we have 2 logical ports (rs232, rs422) for each physical port - * evens are rs232, odds are rs422 - */ -#define GET_PHYSICAL_PORT(_x) ((_x) >> 1) -#define GET_LOGICAL_PORT(_x) ((_x) & 1) -#define IS_PHYSICAL_PORT(_x) !((_x) & 1) -#define IS_RS232(_x) !((_x) & 1) - -static unsigned int Num_of_ioc3_cards; -static unsigned int Submodule_slot; - -/* defining this will get you LOTS of great debug info */ -//#define DEBUG_INTERRUPTS -#define DPRINT_CONFIG(_x...) ; -//#define DPRINT_CONFIG(_x...) printk _x -#define NOT_PROGRESS() ; -//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) - -/* number of characters we want to transmit to the lower level at a time */ -#define MAX_CHARS 256 -#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */ - -/* Device name we're using */ -#define DEVICE_NAME "ttySIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 116 - -/* flags for next_char_state */ -#define NCS_BREAK 0x1 -#define NCS_PARITY 0x2 -#define NCS_FRAMING 0x4 -#define NCS_OVERRUN 0x8 - -/* cause we need SOME parameters ... */ -#define MIN_BAUD_SUPPORTED 1200 -#define MAX_BAUD_SUPPORTED 115200 - -/* protocol types supported */ -#define PROTO_RS232 0 -#define PROTO_RS422 1 - -/* Notification types */ -#define N_DATA_READY 0x01 -#define N_OUTPUT_LOWAT 0x02 -#define N_BREAK 0x04 -#define N_PARITY_ERROR 0x08 -#define N_FRAMING_ERROR 0x10 -#define N_OVERRUN_ERROR 0x20 -#define N_DDCD 0x40 -#define N_DCTS 0x80 - -#define N_ALL_INPUT (N_DATA_READY | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define N_ALL_OUTPUT N_OUTPUT_LOWAT - -#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR) - -#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv) -#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16)) -#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) - -/* Some masks */ -#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ - | UART_LCR_WLEN7 | UART_LCR_WLEN8) -#define LCR_MASK_STOP_BITS (UART_LCR_STOP) - -#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable) - -#define RING_BUF_SIZE 4096 -#define BUF_SIZE_BIT SBBR_L_SIZE -#define PROD_CONS_MASK PROD_CONS_PTR_4K - -#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) - -/* driver specific - one per card */ -struct ioc3_card { - struct { - /* uart ports are allocated here */ - struct uart_port icp_uart_port[LOGICAL_PORTS]; - /* the ioc3_port used for this port */ - struct ioc3_port *icp_port; - } ic_port[PORTS_PER_CARD]; - /* currently enabled interrupts */ - uint32_t ic_enable; -}; - -/* Local port info for each IOC3 serial port */ -struct ioc3_port { - /* handy reference material */ - struct uart_port *ip_port; - struct ioc3_card *ip_card; - struct ioc3_driver_data *ip_idd; - struct ioc3_submodule *ip_is; - - /* pci mem addresses for this port */ - struct ioc3_serialregs __iomem *ip_serial_regs; - struct ioc3_uartregs __iomem *ip_uart_regs; - - /* Ring buffer page for this port */ - dma_addr_t ip_dma_ringbuf; - /* vaddr of ring buffer */ - struct ring_buffer *ip_cpu_ringbuf; - - /* Rings for this port */ - struct ring *ip_inring; - struct ring *ip_outring; - - /* Hook to port specific values */ - struct port_hooks *ip_hooks; - - spinlock_t ip_lock; - - /* Various rx/tx parameters */ - int ip_baud; - int ip_tx_lowat; - int ip_rx_timeout; - - /* Copy of notification bits */ - int ip_notify; - - /* Shadow copies of various registers so we don't need to PIO - * read them constantly - */ - uint32_t ip_sscr; - uint32_t ip_tx_prod; - uint32_t ip_rx_cons; - unsigned char ip_flags; -}; - -/* tx low water mark. We need to notify the driver whenever tx is getting - * close to empty so it can refill the tx buffer and keep things going. - * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll - * have no trouble getting in more chars in time (I certainly hope so). - */ -#define TX_LOWAT_LATENCY 1000 -#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) -#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) - -/* Flags per port */ -#define INPUT_HIGH 0x01 - /* used to signify that we have turned off the rx_high - * temporarily - we need to drain the fifo and don't - * want to get blasted with interrupts. - */ -#define DCD_ON 0x02 - /* DCD state is on */ -#define LOWAT_WRITTEN 0x04 -#define READ_ABORTED 0x08 - /* the read was aborted - used to avaoid infinate looping - * in the interrupt handler - */ -#define INPUT_ENABLE 0x10 - -/* Since each port has different register offsets and bitmasks - * for everything, we'll store those that we need in tables so we - * don't have to be constantly checking the port we are dealing with. - */ -struct port_hooks { - uint32_t intr_delta_dcd; - uint32_t intr_delta_cts; - uint32_t intr_tx_mt; - uint32_t intr_rx_timer; - uint32_t intr_rx_high; - uint32_t intr_tx_explicit; - uint32_t intr_clear; - uint32_t intr_all; - char rs422_select_pin; -}; - -static struct port_hooks hooks_array[PORTS_PER_CARD] = { - /* values for port A */ - { - .intr_delta_dcd = SIO_IR_SA_DELTA_DCD, - .intr_delta_cts = SIO_IR_SA_DELTA_CTS, - .intr_tx_mt = SIO_IR_SA_TX_MT, - .intr_rx_timer = SIO_IR_SA_RX_TIMER, - .intr_rx_high = SIO_IR_SA_RX_HIGH, - .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT, - .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL - | SIO_IR_SA_RX_HIGH - | SIO_IR_SA_RX_TIMER - | SIO_IR_SA_DELTA_DCD - | SIO_IR_SA_DELTA_CTS - | SIO_IR_SA_INT - | SIO_IR_SA_TX_EXPLICIT - | SIO_IR_SA_MEMERR), - .intr_all = SIO_IR_SA, - .rs422_select_pin = GPPR_UARTA_MODESEL_PIN, - }, - - /* values for port B */ - { - .intr_delta_dcd = SIO_IR_SB_DELTA_DCD, - .intr_delta_cts = SIO_IR_SB_DELTA_CTS, - .intr_tx_mt = SIO_IR_SB_TX_MT, - .intr_rx_timer = SIO_IR_SB_RX_TIMER, - .intr_rx_high = SIO_IR_SB_RX_HIGH, - .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT, - .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL - | SIO_IR_SB_RX_HIGH - | SIO_IR_SB_RX_TIMER - | SIO_IR_SB_DELTA_DCD - | SIO_IR_SB_DELTA_CTS - | SIO_IR_SB_INT - | SIO_IR_SB_TX_EXPLICIT - | SIO_IR_SB_MEMERR), - .intr_all = SIO_IR_SB, - .rs422_select_pin = GPPR_UARTB_MODESEL_PIN, - } -}; - -struct ring_entry { - union { - struct { - uint32_t alldata; - uint32_t allsc; - } all; - struct { - char data[4]; /* data bytes */ - char sc[4]; /* status/control */ - } s; - } u; -}; - -/* Test the valid bits in any of the 4 sc chars using "allsc" member */ -#define RING_ANY_VALID \ - ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101) - -#define ring_sc u.s.sc -#define ring_data u.s.data -#define ring_allsc u.all.allsc - -/* Number of entries per ring buffer. */ -#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) - -/* An individual ring */ -struct ring { - struct ring_entry entries[ENTRIES_PER_RING]; -}; - -/* The whole enchilada */ -struct ring_buffer { - struct ring TX_A; - struct ring RX_A; - struct ring TX_B; - struct ring RX_B; -}; - -/* Get a ring from a port struct */ -#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) - -/* for Infinite loop detection */ -#define MAXITER 10000000 - - -/** - * set_baud - Baud rate setting code - * @port: port to set - * @baud: baud rate to use - */ -static int set_baud(struct ioc3_port *port, int baud) -{ - int divisor; - int actual_baud; - int diff; - int lcr, prediv; - struct ioc3_uartregs __iomem *uart; - - for (prediv = 6; prediv < 64; prediv++) { - divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv)); - if (!divisor) - continue; /* invalid divisor */ - actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv)); - - diff = actual_baud - baud; - if (diff < 0) - diff = -diff; - - /* if we're within 1% we've found a match */ - if (diff * 100 <= actual_baud) - break; - } - - /* if the above loop completed, we didn't match - * the baud rate. give up. - */ - if (prediv == 64) { - NOT_PROGRESS(); - return 1; - } - - uart = port->ip_uart_regs; - lcr = readb(&uart->iu_lcr); - - writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr); - writeb((unsigned char)divisor, &uart->iu_dll); - writeb((unsigned char)(divisor >> 8), &uart->iu_dlm); - writeb((unsigned char)prediv, &uart->iu_scr); - writeb((unsigned char)lcr, &uart->iu_lcr); - - return 0; -} - -/** - * get_ioc3_port - given a uart port, return the control structure - * @the_port: uart port to find - */ -static struct ioc3_port *get_ioc3_port(struct uart_port *the_port) -{ - struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev); - struct ioc3_card *card_ptr = idd->data[Submodule_slot]; - int ii, jj; - - if (!card_ptr) { - NOT_PROGRESS(); - return NULL; - } - for (ii = 0; ii < PORTS_PER_CARD; ii++) { - for (jj = 0; jj < LOGICAL_PORTS; jj++) { - if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj]) - return card_ptr->ic_port[ii].icp_port; - } - } - NOT_PROGRESS(); - return NULL; -} - -/** - * port_init - Initialize the sio and ioc3 hardware for a given port - * called per port from attach... - * @port: port to initialize - */ -static int inline port_init(struct ioc3_port *port) -{ - uint32_t sio_cr; - struct port_hooks *hooks = port->ip_hooks; - struct ioc3_uartregs __iomem *uart; - int reset_loop_counter = 0xfffff; - struct ioc3_driver_data *idd = port->ip_idd; - - /* Idle the IOC3 serial interface */ - writel(SSCR_RESET, &port->ip_serial_regs->sscr); - - /* Wait until any pending bus activity for this port has ceased */ - do { - sio_cr = readl(&idd->vma->sio_cr); - if (reset_loop_counter-- <= 0) { - printk(KERN_WARNING - "IOC3 unable to come out of reset" - " scr 0x%x\n", sio_cr); - return -1; - } - } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) && - (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA) - || sio_cr == SIO_CR_ARB_DIAG_TXB - || sio_cr == SIO_CR_ARB_DIAG_RXA - || sio_cr == SIO_CR_ARB_DIAG_RXB)); - - /* Finish reset sequence */ - writel(0, &port->ip_serial_regs->sscr); - - /* Once RESET is done, reload cached tx_prod and rx_cons values - * and set rings to empty by making prod == cons - */ - port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); - port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - /* Disable interrupts for this 16550 */ - uart = port->ip_uart_regs; - writeb(0, &uart->iu_lcr); - writeb(0, &uart->iu_ier); - - /* Set the default baud */ - set_baud(port, port->ip_baud); - - /* Set line control to 8 bits no parity */ - writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Enable the FIFOs */ - writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr); - /* then reset 16550 FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - &uart->iu_fcr); - - /* Clear modem control register */ - writeb(0, &uart->iu_mcr); - - /* Clear deltas in modem status register */ - writel(0, &port->ip_serial_regs->shadow); - - /* Only do this once per port pair */ - if (port->ip_hooks == &hooks_array[0]) { - unsigned long ring_pci_addr; - uint32_t __iomem *sbbr_l, *sbbr_h; - - sbbr_l = &idd->vma->sbbr_l; - sbbr_h = &idd->vma->sbbr_h; - ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; - DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", - __func__, (void *)ring_pci_addr)); - - writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); - writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); - } - - /* Set the receive timeout value to 10 msec */ - writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr); - - /* Set rx threshold, enable DMA */ - /* Set high water mark at 3/4 of full ring */ - port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); - - /* uart experiences pauses at high baud rate reducing actual - * throughput by 10% or so unless we enable high speed polling - * XXX when this hardware bug is resolved we should revert to - * normal polling speed - */ - port->ip_sscr |= SSCR_HIGH_SPD; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Disable and clear all serial related interrupt bits */ - port->ip_card->ic_enable &= ~hooks->intr_clear; - ioc3_disable(port->ip_is, idd, hooks->intr_clear); - ioc3_ack(port->ip_is, idd, hooks->intr_clear); - return 0; -} - -/** - * enable_intrs - enable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void enable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if ((port->ip_card->ic_enable & mask) != mask) { - port->ip_card->ic_enable |= mask; - ioc3_enable(port->ip_is, port->ip_idd, mask); - } -} - -/** - * local_open - local open a port - * @port: port to open - */ -static inline int local_open(struct ioc3_port *port) -{ - int spiniter = 0; - - port->ip_flags = INPUT_ENABLE; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) { - NOT_PROGRESS(); - return -1; - } - } - } - - /* Reset the input fifo. If the uart received chars while the port - * was closed and DMA is not enabled, the uart may have a bunch of - * chars hanging around in its rx fifo which will not be discarded - * by rclr in the upper layer. We must get rid of them here. - */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, - &port->ip_uart_regs->iu_fcr); - - writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Re-enable DMA, set default threshold to intr whenever there is - * data available. - */ - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= 1; /* default threshold */ - - /* Plug in the new sscr. This implicitly clears the DMA_PAUSE - * flag if it was set above - */ - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - port->ip_tx_lowat = 1; - return 0; -} - -/** - * set_rx_timeout - Set rx timeout and threshold values. - * @port: port to use - * @timeout: timeout value in ticks - */ -static inline int set_rx_timeout(struct ioc3_port *port, int timeout) -{ - int threshold; - - port->ip_rx_timeout = timeout; - - /* Timeout is in ticks. Let's figure out how many chars we - * can receive at the current baud rate in that interval - * and set the rx threshold to that amount. There are 4 chars - * per ring entry, so we'll divide the number of chars that will - * arrive in timeout by 4. - * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. - */ - threshold = timeout * port->ip_baud / 4000; - if (threshold == 0) - threshold = 1; /* otherwise we'll intr all the time! */ - - if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD) - return 1; - - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= threshold; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Now set the rx timeout to the given value - * again timeout * SRTR_HZ / HZ - */ - timeout = timeout * SRTR_HZ / 100; - if (timeout > SRTR_CNT) - timeout = SRTR_CNT; - writel(timeout, &port->ip_serial_regs->srtr); - return 0; -} - -/** - * config_port - config the hardware - * @port: port to config - * @baud: baud rate for the port - * @byte_size: data size - * @stop_bits: number of stop bits - * @parenb: parity enable ? - * @parodd: odd parity ? - */ -static inline int -config_port(struct ioc3_port *port, - int baud, int byte_size, int stop_bits, int parenb, int parodd) -{ - char lcr, sizebits; - int spiniter = 0; - - DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " - "parodd %d\n", - __func__, ((struct uart_port *)port->ip_port)->line, - baud, byte_size, stop_bits, parenb, parodd)); - - if (set_baud(port, baud)) - return 1; - - switch (byte_size) { - case 5: - sizebits = UART_LCR_WLEN5; - break; - case 6: - sizebits = UART_LCR_WLEN6; - break; - case 7: - sizebits = UART_LCR_WLEN7; - break; - case 8: - sizebits = UART_LCR_WLEN8; - break; - default: - return 1; - } - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - - /* Clear relevant fields in lcr */ - lcr = readb(&port->ip_uart_regs->iu_lcr); - lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | - UART_LCR_PARITY | LCR_MASK_STOP_BITS); - - /* Set byte size in lcr */ - lcr |= sizebits; - - /* Set parity */ - if (parenb) { - lcr |= UART_LCR_PARITY; - if (!parodd) - lcr |= UART_LCR_EPAR; - } - - /* Set stop bits */ - if (stop_bits) - lcr |= UART_LCR_STOP /* 2 stop bits */ ; - - writeb(lcr, &port->ip_uart_regs->iu_lcr); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - port->ip_baud = baud; - - /* When we get within this number of ring entries of filling the - * entire ring on tx, place an EXPLICIT intr to generate a lowat - * notification when output has drained. - */ - port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; - if (port->ip_tx_lowat == 0) - port->ip_tx_lowat = 1; - - set_rx_timeout(port, 2); - return 0; -} - -/** - * do_write - Write bytes to the port. Returns the number of bytes - * actually written. Called from transmit_chars - * @port: port to use - * @buf: the stuff to write - * @len: how many bytes in 'buf' - */ -static inline int do_write(struct ioc3_port *port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total = 0; - struct ring *outring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - - BUG_ON(!(len >= 0)); - - prod_ptr = port->ip_tx_prod; - cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - outring = port->ip_outring; - - /* Maintain a 1-entry red-zone. The ring buffer is full when - * (cons - prod) % ring_size is 1. Rather than do this subtraction - * in the body of the loop, I'll do it now. - */ - cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; - - /* Stuff the bytes into the output */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - int xx; - - /* Get 4 bytes (one ring entry) at a time */ - entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); - - /* Invalidate all entries */ - entry->ring_allsc = 0; - - /* Copy in some bytes */ - for (xx = 0; (xx < 4) && (len > 0); xx++) { - entry->ring_data[xx] = *buf++; - entry->ring_sc[xx] = TXCB_VALID; - len--; - total++; - } - - /* If we are within some small threshold of filling up the - * entire ring buffer, we must place an EXPLICIT intr here - * to generate a lowat interrupt in case we subsequently - * really do fill up the ring and the caller goes to sleep. - * No need to place more than one though. - */ - if (!(port->ip_flags & LOWAT_WRITTEN) && - ((cons_ptr - prod_ptr) & PROD_CONS_MASK) - <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) { - port->ip_flags |= LOWAT_WRITTEN; - entry->ring_sc[0] |= TXCB_INT_WHEN_DONE; - } - - /* Go on to next entry */ - prod_ptr += sizeof(struct ring_entry); - prod_ptr &= PROD_CONS_MASK; - } - - /* If we sent something, start DMA if necessary */ - if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - - /* Store the new producer pointer. If tx is disabled, we stuff the - * data into the ring buffer, but we don't actually start tx. - */ - if (!uart_tx_stopped(port->ip_port)) { - writel(prod_ptr, &port->ip_serial_regs->stpir); - - /* If we are now transmitting, enable tx_mt interrupt so we - * can disable DMA if necessary when the tx finishes. - */ - if (total > 0) - enable_intrs(port, hooks->intr_tx_mt); - } - port->ip_tx_prod = prod_ptr; - - return total; -} - -/** - * disable_intrs - disable interrupts - * @port: port to enable - * @mask: mask to use - */ -static inline void disable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if (port->ip_card->ic_enable & mask) { - ioc3_disable(port->ip_is, port->ip_idd, mask); - port->ip_card->ic_enable &= ~mask; - } -} - -/** - * set_notification - Modify event notification - * @port: port to use - * @mask: events mask - * @set_on: set ? - */ -static int set_notification(struct ioc3_port *port, int mask, int set_on) -{ - struct port_hooks *hooks = port->ip_hooks; - uint32_t intrbits, sscrbits; - - BUG_ON(!mask); - - intrbits = sscrbits = 0; - - if (mask & N_DATA_READY) - intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); - if (mask & N_OUTPUT_LOWAT) - intrbits |= hooks->intr_tx_explicit; - if (mask & N_DDCD) { - intrbits |= hooks->intr_delta_dcd; - sscrbits |= SSCR_RX_RING_DCD; - } - if (mask & N_DCTS) - intrbits |= hooks->intr_delta_cts; - - if (set_on) { - enable_intrs(port, intrbits); - port->ip_notify |= mask; - port->ip_sscr |= sscrbits; - } else { - disable_intrs(port, intrbits); - port->ip_notify &= ~mask; - port->ip_sscr &= ~sscrbits; - } - - /* We require DMA if either DATA_READY or DDCD notification is - * currently requested. If neither of these is requested and - * there is currently no tx in progress, DMA may be disabled. - */ - if (port->ip_notify & (N_DATA_READY | N_DDCD)) - port->ip_sscr |= SSCR_DMA_EN; - else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt)) - port->ip_sscr &= ~SSCR_DMA_EN; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - return 0; -} - -/** - * set_mcr - set the master control reg - * @the_port: port to use - * @mask1: mcr mask - * @mask2: shadow mask - */ -static inline int set_mcr(struct uart_port *the_port, - int mask1, int mask2) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - int spiniter = 0; - char mcr; - - if (!port) - return -1; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - shadow = readl(&port->ip_serial_regs->shadow); - mcr = (shadow & 0xff000000) >> 24; - - /* Set new value */ - mcr |= mask1; - shadow |= mask2; - writeb(mcr, &port->ip_uart_regs->iu_mcr); - writel(shadow, &port->ip_serial_regs->shadow); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - return 0; -} - -/** - * ioc3_set_proto - set the protocol for the port - * @port: port to use - * @proto: protocol to use - */ -static int ioc3_set_proto(struct ioc3_port *port, int proto) -{ - struct port_hooks *hooks = port->ip_hooks; - - switch (proto) { - default: - case PROTO_RS232: - /* Clear the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs232\n", __func__)); - writel(0, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - - case PROTO_RS422: - /* Set the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs422\n", __func__)); - writel(1, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - } - return 0; -} - -/** - * transmit_chars - upper level write, called with the_port->lock - * @the_port: port to write - */ -static void transmit_chars(struct uart_port *the_port) -{ - int xmit_count, tail, head; - int result; - char *start; - struct tty_struct *tty; - struct ioc3_port *port = get_ioc3_port(the_port); - struct uart_state *state; - - if (!the_port) - return; - if (!port) - return; - - state = the_port->state; - tty = state->port.tty; - - if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { - /* Nothing to do or hw stopped */ - set_notification(port, N_ALL_OUTPUT, 0); - return; - } - - head = state->xmit.head; - tail = state->xmit.tail; - start = (char *)&state->xmit.buf[tail]; - - /* write out all the data or until the end of the buffer */ - xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); - if (xmit_count > 0) { - result = do_write(port, start, xmit_count); - if (result > 0) { - /* booking */ - xmit_count -= result; - the_port->icount.tx += result; - /* advance the pointers */ - tail += result; - tail &= UART_XMIT_SIZE - 1; - state->xmit.tail = tail; - start = (char *)&state->xmit.buf[tail]; - } - } - if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(the_port); - - if (uart_circ_empty(&state->xmit)) { - set_notification(port, N_OUTPUT_LOWAT, 0); - } else { - set_notification(port, N_OUTPUT_LOWAT, 1); - } -} - -/** - * ioc3_change_speed - change the speed of the port - * @the_port: port to change - * @new_termios: new termios settings - * @old_termios: old termios settings - */ -static void -ioc3_change_speed(struct uart_port *the_port, - struct ktermios *new_termios, struct ktermios *old_termios) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned int cflag, iflag; - int baud; - int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; - struct uart_state *state = the_port->state; - - cflag = new_termios->c_cflag; - iflag = new_termios->c_iflag; - - switch (cflag & CSIZE) { - case CS5: - new_data = 5; - break; - case CS6: - new_data = 6; - break; - case CS7: - new_data = 7; - break; - case CS8: - new_data = 8; - break; - default: - /* cuz we always need a default ... */ - new_data = 5; - break; - } - if (cflag & CSTOPB) { - new_stop = 1; - } - if (cflag & PARENB) { - new_parity_enable = 1; - if (cflag & PARODD) - new_parity = 1; - } - baud = uart_get_baud_rate(the_port, new_termios, old_termios, - MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, - the_port->line)); - - if (!the_port->fifosize) - the_port->fifosize = FIFO_SIZE; - uart_update_timeout(the_port, cflag, baud); - - the_port->ignore_status_mask = N_ALL_INPUT; - - state->port.tty->low_latency = 1; - - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~(N_PARITY_ERROR - | N_FRAMING_ERROR); - if (iflag & IGNBRK) { - the_port->ignore_status_mask &= ~N_BREAK; - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; - } - if (!(cflag & CREAD)) { - /* ignore everything */ - the_port->ignore_status_mask &= ~N_DATA_READY; - } - - if (cflag & CRTSCTS) { - /* enable hardware flow control */ - port->ip_sscr |= SSCR_HFC_EN; - } - else { - /* disable hardware flow control */ - port->ip_sscr &= ~SSCR_HFC_EN; - } - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Set the configuration and proper notification call */ - DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " - "config_port(baud %d data %d stop %d penable %d " - " parity %d), notification 0x%x\n", - __func__, (void *)port, the_port->line, cflag, baud, - new_data, new_stop, new_parity_enable, new_parity, - the_port->ignore_status_mask)); - - if ((config_port(port, baud, /* baud */ - new_data, /* byte size */ - new_stop, /* stop bits */ - new_parity_enable, /* set parity */ - new_parity)) >= 0) { /* parity 1==odd */ - set_notification(port, the_port->ignore_status_mask, 1); - } -} - -/** - * ic3_startup_local - Start up the serial port - returns >= 0 if no errors - * @the_port: Port to operate on - */ -static inline int ic3_startup_local(struct uart_port *the_port) -{ - struct ioc3_port *port; - - if (!the_port) { - NOT_PROGRESS(); - return -1; - } - - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -1; - } - - local_open(port); - - /* set the protocol */ - ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 : - PROTO_RS422); - return 0; -} - -/* - * ioc3_cb_output_lowat - called when the output low water mark is hit - * @port: port to output - */ -static void ioc3_cb_output_lowat(struct ioc3_port *port) -{ - unsigned long pflags; - - /* the_port->lock is set on the call here */ - if (port->ip_port) { - spin_lock_irqsave(&port->ip_port->lock, pflags); - transmit_chars(port->ip_port); - spin_unlock_irqrestore(&port->ip_port->lock, pflags); - } -} - -/* - * ioc3_cb_post_ncs - called for some basic errors - * @port: port to use - * @ncs: event - */ -static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs) -{ - struct uart_icount *icount; - - icount = &the_port->icount; - - if (ncs & NCS_BREAK) - icount->brk++; - if (ncs & NCS_FRAMING) - icount->frame++; - if (ncs & NCS_OVERRUN) - icount->overrun++; - if (ncs & NCS_PARITY) - icount->parity++; -} - -/** - * do_read - Read in bytes from the port. Return the number of bytes - * actually read. - * @the_port: port to use - * @buf: place to put the stuff we read - * @len: how big 'buf' is - */ - -static inline int do_read(struct uart_port *the_port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total; - struct ioc3_port *port = get_ioc3_port(the_port); - struct ring *inring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - int byte_num; - char *sc; - int loop_counter; - - BUG_ON(!(len >= 0)); - BUG_ON(!port); - - /* There is a nasty timing issue in the IOC3. When the rx_timer - * expires or the rx_high condition arises, we take an interrupt. - * At some point while servicing the interrupt, we read bytes from - * the ring buffer and re-arm the rx_timer. However the rx_timer is - * not started until the first byte is received *after* it is armed, - * and any bytes pending in the rx construction buffers are not drained - * to memory until either there are 4 bytes available or the rx_timer - * expires. This leads to a potential situation where data is left - * in the construction buffers forever - 1 to 3 bytes were received - * after the interrupt was generated but before the rx_timer was - * re-armed. At that point as long as no subsequent bytes are received - * the timer will never be started and the bytes will remain in the - * construction buffer forever. The solution is to execute a DRAIN - * command after rearming the timer. This way any bytes received before - * the DRAIN will be drained to memory, and any bytes received after - * the DRAIN will start the TIMER and be drained when it expires. - * Luckily, this only needs to be done when the DMA buffer is empty - * since there is no requirement that this function return all - * available data as long as it returns some. - */ - /* Re-arm the timer */ - - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - cons_ptr = port->ip_rx_cons; - - if (prod_ptr == cons_ptr) { - int reset_dma = 0; - - /* Input buffer appears empty, do a flush. */ - - /* DMA must be enabled for this to work. */ - if (!(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - reset_dma = 1; - } - - /* Potential race condition: we must reload the srpir after - * issuing the drain command, otherwise we could think the rx - * buffer is empty, then take a very long interrupt, and when - * we come back it's full and we wait forever for the drain to - * complete. - */ - writel(port->ip_sscr | SSCR_RX_DRAIN, - &port->ip_serial_regs->sscr); - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - - /* We must not wait for the DRAIN to complete unless there are - * at least 8 bytes (2 ring entries) available to receive the - * data otherwise the DRAIN will never complete and we'll - * deadlock here. - * In fact, to make things easier, I'll just ignore the flush if - * there is any data at all now available. - */ - if (prod_ptr == cons_ptr) { - loop_counter = 0; - while (readl(&port->ip_serial_regs->sscr) & - SSCR_RX_DRAIN) { - loop_counter++; - if (loop_counter > MAXITER) - return -1; - } - - /* SIGH. We have to reload the prod_ptr *again* since - * the drain may have caused it to change - */ - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - } - if (reset_dma) { - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - } - inring = port->ip_inring; - port->ip_flags &= ~READ_ABORTED; - - total = 0; - loop_counter = 0xfffff; /* to avoid hangs */ - - /* Grab bytes from the hardware */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - entry = (struct ring_entry *)((caddr_t) inring + cons_ptr); - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on read (line %d).\n", - the_port->line); - break; - } - - /* According to the producer pointer, this ring entry - * must contain some data. But if the PIO happened faster - * than the DMA, the data may not be available yet, so let's - * wait until it arrives. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - /* Indicate the read is aborted so we don't disable - * the interrupt thinking that the consumer is - * congested. - */ - port->ip_flags |= READ_ABORTED; - len = 0; - break; - } - - /* Load the bytes/status out of the ring entry */ - for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { - sc = &(entry->ring_sc[byte_num]); - - /* Check for change in modem state or overrun */ - if ((*sc & RXSB_MODEM_VALID) - && (port->ip_notify & N_DDCD)) { - /* Notify upper layer if DCD dropped */ - if ((port->ip_flags & DCD_ON) - && !(*sc & RXSB_DCD)) { - /* If we have already copied some data, - * return it. We'll pick up the carrier - * drop on the next pass. That way we - * don't throw away the data that has - * already been copied back to - * the caller's buffer. - */ - if (total > 0) { - len = 0; - break; - } - port->ip_flags &= ~DCD_ON; - - /* Turn off this notification so the - * carrier drop protocol won't see it - * again when it does a read. - */ - *sc &= ~RXSB_MODEM_VALID; - - /* To keep things consistent, we need - * to update the consumer pointer so - * the next reader won't come in and - * try to read the same ring entries - * again. This must be done here before - * the dcd change. - */ - - if ((entry->ring_allsc & RING_ANY_VALID) - == 0) { - cons_ptr += (int)sizeof - (struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - writel(cons_ptr, - &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* Notify upper layer of carrier drop */ - if ((port->ip_notify & N_DDCD) - && port->ip_port) { - uart_handle_dcd_change - (port->ip_port, 0); - wake_up_interruptible - (&the_port->state-> - port.delta_msr_wait); - } - - /* If we had any data to return, we - * would have returned it above. - */ - return 0; - } - } - if (*sc & RXSB_MODEM_VALID) { - /* Notify that an input overrun occurred */ - if ((*sc & RXSB_OVERRUN) - && (port->ip_notify & N_OVERRUN_ERROR)) { - ioc3_cb_post_ncs(the_port, NCS_OVERRUN); - } - /* Don't look at this byte again */ - *sc &= ~RXSB_MODEM_VALID; - } - - /* Check for valid data or RX errors */ - if ((*sc & RXSB_DATA_VALID) && - ((*sc & (RXSB_PAR_ERR - | RXSB_FRAME_ERR | RXSB_BREAK)) - && (port->ip_notify & (N_PARITY_ERROR - | N_FRAMING_ERROR - | N_BREAK)))) { - /* There is an error condition on the next byte. - * If we have already transferred some bytes, - * we'll stop here. Otherwise if this is the - * first byte to be read, we'll just transfer - * it alone after notifying the - * upper layer of its status. - */ - if (total > 0) { - len = 0; - break; - } else { - if ((*sc & RXSB_PAR_ERR) && - (port-> - ip_notify & N_PARITY_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_PARITY); - } - if ((*sc & RXSB_FRAME_ERR) && - (port-> - ip_notify & N_FRAMING_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_FRAMING); - } - if ((*sc & RXSB_BREAK) - && (port->ip_notify & N_BREAK)) { - ioc3_cb_post_ncs - (the_port, NCS_BREAK); - } - len = 1; - } - } - if (*sc & RXSB_DATA_VALID) { - *sc &= ~RXSB_DATA_VALID; - *buf = entry->ring_data[byte_num]; - buf++; - len--; - total++; - } - } - - /* If we used up this entry entirely, go on to the next one, - * otherwise we must have run out of buffer space, so - * leave the consumer pointer here for the next read in case - * there are still unread bytes in this entry. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - cons_ptr += (int)sizeof(struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - } - - /* Update consumer pointer and re-arm rx timer interrupt */ - writel(cons_ptr, &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* If we have now dipped below the rx high water mark and we have - * rx_high interrupt turned off, we can now turn it back on again. - */ - if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) - & PROD_CONS_MASK) < - ((port-> - ip_sscr & - SSCR_RX_THRESHOLD) - << PROD_CONS_PTR_OFF))) { - port->ip_flags &= ~INPUT_HIGH; - enable_intrs(port, hooks->intr_rx_high); - } - return total; -} - -/** - * receive_chars - upper level read. - * @the_port: port to read from - */ -static int receive_chars(struct uart_port *the_port) -{ - struct tty_struct *tty; - unsigned char ch[MAX_CHARS]; - int read_count = 0, read_room, flip = 0; - struct uart_state *state = the_port->state; - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned long pflags; - - /* Make sure all the pointers are "good" ones */ - if (!state) - return 0; - if (!state->port.tty) - return 0; - - if (!(port->ip_flags & INPUT_ENABLE)) - return 0; - - spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - - read_count = do_read(the_port, ch, MAX_CHARS); - if (read_count > 0) { - flip = 1; - read_room = tty_insert_flip_string(tty, ch, read_count); - the_port->icount.rx += read_count; - } - spin_unlock_irqrestore(&the_port->lock, pflags); - - if (flip) - tty_flip_buffer_push(tty); - - return read_count; -} - -/** - * ioc3uart_intr_one - lowest level (per port) interrupt handler. - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - */ - -static int inline -ioc3uart_intr_one(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int port_num = GET_PORT_FROM_SIO_IR(pending); - struct port_hooks *hooks; - unsigned int rx_high_rd_aborted = 0; - unsigned long flags; - struct uart_port *the_port; - struct ioc3_port *port; - int loop_counter; - struct ioc3_card *card_ptr; - unsigned int sio_ir; - - card_ptr = idd->data[is->id]; - port = card_ptr->ic_port[port_num].icp_port; - hooks = port->ip_hooks; - - /* Possible race condition here: The tx_mt interrupt bit may be - * cleared without the intervention of the interrupt handler, - * e.g. by a write. If the top level interrupt handler reads a - * tx_mt, then some other processor does a write, starting up - * output, then we come in here, see the tx_mt and stop DMA, the - * output started by the other processor will hang. Thus we can - * only rely on tx_mt being legitimate if it is read while the - * port lock is held. Therefore this bit must be ignored in the - * passed in interrupt mask which was read by the top level - * interrupt handler since the port lock was not held at the time - * it was read. We can only rely on this bit being accurate if it - * is read while the port lock is held. So we'll clear it for now, - * and reload it later once we have the port lock. - */ - - sio_ir = pending & ~(hooks->intr_tx_mt); - spin_lock_irqsave(&port->ip_lock, flags); - - loop_counter = MAXITER; /* to avoid hangs */ - - do { - uint32_t shadow; - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on interrupt (line %d).\n", - ((struct uart_port *)port->ip_port)->line); - break; - } - /* Handle a DCD change */ - if (sio_ir & hooks->intr_delta_dcd) { - ioc3_ack(is, idd, hooks->intr_delta_dcd); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DDCD) - && (shadow & SHADOW_DCD) - && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_dcd_change(the_port, - shadow & SHADOW_DCD); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } else if ((port->ip_notify & N_DDCD) - && !(shadow & SHADOW_DCD)) { - /* Flag delta DCD/no DCD */ - uart_handle_dcd_change(port->ip_port, - shadow & SHADOW_DCD); - port->ip_flags |= DCD_ON; - } - } - - /* Handle a CTS change */ - if (sio_ir & hooks->intr_delta_cts) { - ioc3_ack(is, idd, hooks->intr_delta_cts); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DCTS) && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_cts_change(the_port, shadow - & SHADOW_CTS); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } - } - - /* rx timeout interrupt. Must be some data available. Put this - * before the check for rx_high since servicing this condition - * may cause that condition to clear. - */ - if (sio_ir & hooks->intr_rx_timer) { - ioc3_ack(is, idd, hooks->intr_rx_timer); - if ((port->ip_notify & N_DATA_READY) - && (port->ip_port)) { - receive_chars(port->ip_port); - } - } - - /* rx high interrupt. Must be after rx_timer. */ - else if (sio_ir & hooks->intr_rx_high) { - /* Data available, notify upper layer */ - if ((port->ip_notify & N_DATA_READY) && port->ip_port) { - receive_chars(port->ip_port); - } - - /* We can't ACK this interrupt. If receive_chars didn't - * cause the condition to clear, we'll have to disable - * the interrupt until the data is drained. - * If the read was aborted, don't disable the interrupt - * as this may cause us to hang indefinitely. An - * aborted read generally means that this interrupt - * hasn't been delivered to the cpu yet anyway, even - * though we see it as asserted when we read the sio_ir. - */ - if ((sio_ir = PENDING(card_ptr, idd)) - & hooks->intr_rx_high) { - if (port->ip_flags & READ_ABORTED) { - rx_high_rd_aborted++; - } - else { - card_ptr->ic_enable &= ~hooks->intr_rx_high; - port->ip_flags |= INPUT_HIGH; - } - } - } - - /* We got a low water interrupt: notify upper layer to - * send more data. Must come before tx_mt since servicing - * this condition may cause that condition to clear. - */ - if (sio_ir & hooks->intr_tx_explicit) { - port->ip_flags &= ~LOWAT_WRITTEN; - ioc3_ack(is, idd, hooks->intr_tx_explicit); - if (port->ip_notify & N_OUTPUT_LOWAT) - ioc3_cb_output_lowat(port); - } - - /* Handle tx_mt. Must come after tx_explicit. */ - else if (sio_ir & hooks->intr_tx_mt) { - /* If we are expecting a lowat notification - * and we get to this point it probably means that for - * some reason the tx_explicit didn't work as expected - * (that can legitimately happen if the output buffer is - * filled up in just the right way). - * So send the notification now. - */ - if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc3_cb_output_lowat(port); - - /* We need to reload the sio_ir since the lowat - * call may have caused another write to occur, - * clearing the tx_mt condition. - */ - sio_ir = PENDING(card_ptr, idd); - } - - /* If the tx_mt condition still persists even after the - * lowat call, we've got some work to do. - */ - if (sio_ir & hooks->intr_tx_mt) { - /* If we are not currently expecting DMA input, - * and the transmitter has just gone idle, - * there is no longer any reason for DMA, so - * disable it. - */ - if (!(port->ip_notify - & (N_DATA_READY | N_DDCD))) { - BUG_ON(!(port->ip_sscr - & SSCR_DMA_EN)); - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, - &port->ip_serial_regs->sscr); - } - /* Prevent infinite tx_mt interrupt */ - card_ptr->ic_enable &= ~hooks->intr_tx_mt; - } - } - sio_ir = PENDING(card_ptr, idd); - - /* if the read was aborted and only hooks->intr_rx_high, - * clear hooks->intr_rx_high, so we do not loop forever. - */ - - if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { - sio_ir &= ~hooks->intr_rx_high; - } - } while (sio_ir & hooks->intr_all); - - spin_unlock_irqrestore(&port->ip_lock, flags); - ioc3_enable(is, idd, card_ptr->ic_enable); - return 0; -} - -/** - * ioc3uart_intr - field all serial interrupts - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - * - */ - -static int ioc3uart_intr(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int ret = 0; - - /* - * The upper level interrupt handler sends interrupts for both ports - * here. So we need to call for each port with its interrupts. - */ - - if (pending & SIO_IR_SA) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA); - if (pending & SIO_IR_SB) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB); - - return ret; -} - -/** - * ic3_type - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *ic3_type(struct uart_port *the_port) -{ - if (IS_RS232(the_port->line)) - return "SGI IOC3 Serial [rs232]"; - else - return "SGI IOC3 Serial [rs422]"; -} - -/** - * ic3_tx_empty - Is the transmitter empty? - * @port: Port to operate on - * - */ -static unsigned int ic3_tx_empty(struct uart_port *the_port) -{ - unsigned int ret = 0; - struct ioc3_port *port = get_ioc3_port(the_port); - - if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT) - ret = TIOCSER_TEMT; - return ret; -} - -/** - * ic3_stop_tx - stop the transmitter - * @port: Port to operate on - * - */ -static void ic3_stop_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - set_notification(port, N_OUTPUT_LOWAT, 0); -} - -/** - * ic3_stop_rx - stop the receiver - * @port: Port to operate on - * - */ -static void ic3_stop_rx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - port->ip_flags &= ~INPUT_ENABLE; -} - -/** - * null_void_function - * @port: Port to operate on - * - */ -static void null_void_function(struct uart_port *the_port) -{ -} - -/** - * ic3_shutdown - shut down the port - free irq and disable - * @port: port to shut down - * - */ -static void ic3_shutdown(struct uart_port *the_port) -{ - unsigned long port_flags; - struct ioc3_port *port; - struct uart_state *state; - - port = get_ioc3_port(the_port); - if (!port) - return; - - state = the_port->state; - wake_up_interruptible(&state->port.delta_msr_wait); - - spin_lock_irqsave(&the_port->lock, port_flags); - set_notification(port, N_ALL, 0); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_set_mctrl - set control lines (dtr, rts, etc) - * @port: Port to operate on - * @mctrl: Lines to set/unset - * - */ -static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl) -{ - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - set_mcr(the_port, mcr, SHADOW_DTR); -} - -/** - * ic3_get_mctrl - get control line info - * @port: port to operate on - * - */ -static unsigned int ic3_get_mctrl(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - unsigned int ret = 0; - - if (!port) - return 0; - - shadow = readl(&port->ip_serial_regs->shadow); - if (shadow & SHADOW_DCD) - ret |= TIOCM_CD; - if (shadow & SHADOW_DR) - ret |= TIOCM_DSR; - if (shadow & SHADOW_CTS) - ret |= TIOCM_CTS; - return ret; -} - -/** - * ic3_start_tx - Start transmitter. Called with the_port->lock - * @port: Port to operate on - * - */ -static void ic3_start_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) { - set_notification(port, N_OUTPUT_LOWAT, 1); - enable_intrs(port, port->ip_hooks->intr_tx_mt); - } -} - -/** - * ic3_break_ctl - handle breaks - * @port: Port to operate on - * @break_state: Break state - * - */ -static void ic3_break_ctl(struct uart_port *the_port, int break_state) -{ -} - -/** - * ic3_startup - Start up the serial port - always return 0 (We're always on) - * @port: Port to operate on - * - */ -static int ic3_startup(struct uart_port *the_port) -{ - int retval; - struct ioc3_port *port; - struct ioc3_card *card_ptr; - unsigned long port_flags; - - if (!the_port) { - NOT_PROGRESS(); - return -ENODEV; - } - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -ENODEV; - } - card_ptr = port->ip_card; - port->ip_port = the_port; - - if (!card_ptr) { - NOT_PROGRESS(); - return -ENODEV; - } - - /* Start up the serial port */ - spin_lock_irqsave(&the_port->lock, port_flags); - retval = ic3_startup_local(the_port); - spin_unlock_irqrestore(&the_port->lock, port_flags); - return retval; -} - -/** - * ic3_set_termios - set termios stuff - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -ic3_set_termios(struct uart_port *the_port, - struct ktermios *termios, struct ktermios *old_termios) -{ - unsigned long port_flags; - - spin_lock_irqsave(&the_port->lock, port_flags); - ioc3_change_speed(the_port, termios, old_termios); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_request_port - allocate resources for port - no op.... - * @port: port to operate on - * - */ -static int ic3_request_port(struct uart_port *port) -{ - return 0; -} - -/* Associate the uart functions above - given to serial core */ -static struct uart_ops ioc3_ops = { - .tx_empty = ic3_tx_empty, - .set_mctrl = ic3_set_mctrl, - .get_mctrl = ic3_get_mctrl, - .stop_tx = ic3_stop_tx, - .start_tx = ic3_start_tx, - .stop_rx = ic3_stop_rx, - .enable_ms = null_void_function, - .break_ctl = ic3_break_ctl, - .startup = ic3_startup, - .shutdown = ic3_shutdown, - .set_termios = ic3_set_termios, - .type = ic3_type, - .release_port = null_void_function, - .request_port = ic3_request_port, -}; - -/* - * Boot-time initialization code - */ - -static struct uart_driver ioc3_uart = { - .owner = THIS_MODULE, - .driver_name = "ioc3_serial", - .dev_name = DEVICE_NAME, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR, - .nr = MAX_LOGICAL_PORTS -}; - -/** - * ioc3_serial_core_attach - register with serial core - * This is done during pci probing - * @is: submodule struct for this - * @idd: handle for this card - */ -static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_port *port; - struct uart_port *the_port; - struct ioc3_card *card_ptr = idd->data[is->id]; - int ii, phys_port; - struct pci_dev *pdev = idd->pdev; - - DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", - __func__, pdev, (void *)card_ptr)); - - if (!card_ptr) - return -ENODEV; - - /* once around for each logical port on this card */ - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - phys_port = GET_PHYSICAL_PORT(ii); - the_port = &card_ptr->ic_port[phys_port]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - port = card_ptr->ic_port[phys_port].icp_port; - port->ip_port = the_port; - - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", - __func__, (void *)the_port, (void *)port, - phys_port, ii)); - - /* membase, iobase and mapbase just need to be non-0 */ - the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | ii; - the_port->line = (Num_of_ioc3_cards << 2) | ii; - the_port->mapbase = 1; - the_port->type = PORT_16550A; - the_port->fifosize = FIFO_SIZE; - the_port->ops = &ioc3_ops; - the_port->irq = idd->irq_io; - the_port->dev = &pdev->dev; - - if (uart_add_one_port(&ioc3_uart, the_port) < 0) { - printk(KERN_WARNING - "%s: unable to add port %d bus %d\n", - __func__, the_port->line, pdev->bus->number); - } else { - DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", - the_port->line, the_port->irq, pdev->bus->number)); - } - - /* all ports are rs232 for now */ - if (IS_PHYSICAL_PORT(ii)) - ioc3_set_proto(port, PROTO_RS232); - } - return 0; -} - -/** - * ioc3uart_remove - register detach function - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this submodule - */ - -static int ioc3uart_remove(struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_card *card_ptr = idd->data[is->id]; - struct uart_port *the_port; - struct ioc3_port *port; - int ii; - - if (card_ptr) { - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - if (the_port) - uart_remove_one_port(&ioc3_uart, the_port); - port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port; - if (port && IS_PHYSICAL_PORT(ii) - && (GET_PHYSICAL_PORT(ii) == 0)) { - pci_free_consistent(port->ip_idd->pdev, - TOTAL_RING_BUF_SIZE, - (void *)port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_port = NULL; - } - } - kfree(card_ptr); - idd->data[is->id] = NULL; - } - return 0; -} - -/** - * ioc3uart_probe - card probe function called from shim driver - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this card - */ - -static int __devinit -ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) -{ - struct pci_dev *pdev = idd->pdev; - struct ioc3_card *card_ptr; - int ret = 0; - struct ioc3_port *port; - struct ioc3_port *ports[PORTS_PER_CARD]; - int phys_port; - int cnt; - - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); - - card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); - if (!card_ptr) { - printk(KERN_WARNING "ioc3_attach_one" - ": unable to get memory for the IOC3\n"); - return -ENOMEM; - } - idd->data[is->id] = card_ptr; - Submodule_slot = is->id; - - writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) | - ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) | - (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr); - - pci_write_config_dword(pdev, PCI_LAT, 0xff00); - - /* Enable serial port mode select generic PIO pins as outputs */ - ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL); - - /* Create port structures for each port */ - for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { - port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); - if (!port) { - printk(KERN_WARNING - "IOC3 serial memory not available for port\n"); - ret = -ENOMEM; - goto out4; - } - spin_lock_init(&port->ip_lock); - - /* we need to remember the previous ones, to point back to - * them farther down - setting up the ring buffers. - */ - ports[phys_port] = port; - - /* init to something useful */ - card_ptr->ic_port[phys_port].icp_port = port; - port->ip_is = is; - port->ip_idd = idd; - port->ip_baud = 9600; - port->ip_card = card_ptr; - port->ip_hooks = &hooks_array[phys_port]; - - /* Setup each port */ - if (phys_port == 0) { - port->ip_serial_regs = &idd->vma->port_a; - port->ip_uart_regs = &idd->vma->sregs.uarta; - - DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* setup ring buffers */ - port->ip_cpu_ringbuf = pci_alloc_consistent(pdev, - TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf); - - BUG_ON(!((((int64_t) port->ip_dma_ringbuf) & - (TOTAL_RING_BUF_SIZE - 1)) == 0)); - port->ip_inring = RING(port, RX_A); - port->ip_outring = RING(port, TX_A); - DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - else { - port->ip_serial_regs = &idd->vma->port_b; - port->ip_uart_regs = &idd->vma->sregs.uartb; - - DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* share the ring buffers */ - port->ip_dma_ringbuf = - ports[phys_port - 1]->ip_dma_ringbuf; - port->ip_cpu_ringbuf = - ports[phys_port - 1]->ip_cpu_ringbuf; - port->ip_inring = RING(port, RX_B); - port->ip_outring = RING(port, TX_B); - DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - - DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", - __func__, - phys_port, (void *)port, (void *)card_ptr)); - DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* Initialize the hardware for IOC3 */ - port_init(port); - - DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " - "outring 0x%p\n", - __func__, - phys_port, (void *)port, - (void *)port->ip_inring, - (void *)port->ip_outring)); - - } - - /* register port with the serial core */ - - if ((ret = ioc3_serial_core_attach(is, idd))) - goto out4; - - Num_of_ioc3_cards++; - - return ret; - - /* error exits that give back resources */ -out4: - for (cnt = 0; cnt < phys_port; cnt++) - kfree(ports[cnt]); - - kfree(card_ptr); - return ret; -} - -static struct ioc3_submodule ioc3uart_ops = { - .name = "IOC3uart", - .probe = ioc3uart_probe, - .remove = ioc3uart_remove, - /* call .intr for both ports initially */ - .irq_mask = SIO_IR_SA | SIO_IR_SB, - .intr = ioc3uart_intr, - .owner = THIS_MODULE, -}; - -/** - * ioc3_detect - module init called, - */ -static int __init ioc3uart_init(void) -{ - int ret; - - /* register with serial core */ - if ((ret = uart_register_driver(&ioc3_uart)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register IOC3 uart serial driver\n", - __func__); - return ret; - } - ret = ioc3_register_submodule(&ioc3uart_ops); - if (ret) - uart_unregister_driver(&ioc3_uart); - return ret; -} - -static void __exit ioc3uart_exit(void) -{ - ioc3_unregister_submodule(&ioc3uart_ops); - uart_unregister_driver(&ioc3_uart); -} - -module_init(ioc3uart_init); -module_exit(ioc3uart_exit); - -MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); -MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c deleted file mode 100644 index fcfe826..0000000 --- a/drivers/serial/ioc4_serial.c +++ /dev/null @@ -1,2953 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. - */ - - -/* - * This file contains a module version of the ioc4 serial driver. This - * includes all the support functions needed (support functions, etc.) - * and the serial driver itself. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * interesting things about the ioc4 - */ - -#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ -#define IOC4_NUM_CARDS 8 /* max cards per partition */ - -#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ - (_n == 1) ? (IOC4_SIO_IR_S1) : \ - (_n == 2) ? (IOC4_SIO_IR_S2) : \ - (IOC4_SIO_IR_S3) - -#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ - (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ - (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ - (IOC4_OTHER_IR_S3_MEMERR) - - -/* - * All IOC4 registers are 32 bits wide. - */ - -/* - * PCI Memory Space Map - */ -#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ -#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) -#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) -#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) -#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) -#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) -#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) - -/* Interrupt types */ -#define IOC4_SIO_INTR_TYPE 0 -#define IOC4_OTHER_INTR_TYPE 1 -#define IOC4_NUM_INTR_TYPES 2 - -/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ -#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ -#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ -#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ -#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ -#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ -#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ -#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ -#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ -#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ -#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ -#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ -#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ -#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ -#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ -#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ -#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ -#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ -#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ -#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ -#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ -#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ -#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ -#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ -#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ -#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ -#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ -#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ -#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ -#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ -#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ - -/* Per device interrupt masks */ -#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ - IOC4_SIO_IR_S0_RX_FULL | \ - IOC4_SIO_IR_S0_RX_HIGH | \ - IOC4_SIO_IR_S0_RX_TIMER | \ - IOC4_SIO_IR_S0_DELTA_DCD | \ - IOC4_SIO_IR_S0_DELTA_CTS | \ - IOC4_SIO_IR_S0_INT | \ - IOC4_SIO_IR_S0_TX_EXPLICIT) -#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ - IOC4_SIO_IR_S1_RX_FULL | \ - IOC4_SIO_IR_S1_RX_HIGH | \ - IOC4_SIO_IR_S1_RX_TIMER | \ - IOC4_SIO_IR_S1_DELTA_DCD | \ - IOC4_SIO_IR_S1_DELTA_CTS | \ - IOC4_SIO_IR_S1_INT | \ - IOC4_SIO_IR_S1_TX_EXPLICIT) -#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ - IOC4_SIO_IR_S2_RX_FULL | \ - IOC4_SIO_IR_S2_RX_HIGH | \ - IOC4_SIO_IR_S2_RX_TIMER | \ - IOC4_SIO_IR_S2_DELTA_DCD | \ - IOC4_SIO_IR_S2_DELTA_CTS | \ - IOC4_SIO_IR_S2_INT | \ - IOC4_SIO_IR_S2_TX_EXPLICIT) -#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ - IOC4_SIO_IR_S3_RX_FULL | \ - IOC4_SIO_IR_S3_RX_HIGH | \ - IOC4_SIO_IR_S3_RX_TIMER | \ - IOC4_SIO_IR_S3_DELTA_DCD | \ - IOC4_SIO_IR_S3_DELTA_CTS | \ - IOC4_SIO_IR_S3_INT | \ - IOC4_SIO_IR_S3_TX_EXPLICIT) - -/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ -#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ -#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ -#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ -#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ -#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ -#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ -#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */ -#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */ -#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */ -#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */ - -#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \ - IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR) - -/* Bitmasks for IOC4_SIO_CR */ -#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ -#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 -#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 -#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 -#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 -#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 -#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 -#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 -#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 -#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among - serial ports (ro) */ -/* Defs for some of the generic I/O pins */ -#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 - mode sel */ -#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 - mode sel */ -#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 - mode sel */ -#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 - mode sel */ - -#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling - uart 0 mode select */ -#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling - uart 1 mode select */ -#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling - uart 2 mode select */ -#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling - uart 3 mode select */ - -/* Bitmasks for serial RX status byte */ -#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ -#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ -#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ -#define IOC4_RXSB_BREAK 0x08 /* Break character */ -#define IOC4_RXSB_CTS 0x10 /* State of CTS */ -#define IOC4_RXSB_DCD 0x20 /* State of DCD */ -#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ -#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR - * & BREAK valid */ - -/* Bitmasks for serial TX control byte */ -#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ -#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ -#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ -#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ -#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ - -/* Bitmasks for IOC4_SBBR_L */ -#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ - -/* Bitmasks for IOC4_SSCR_<3:0> */ -#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ -#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ -#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ -#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ -#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ -#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ -#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ -#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ -#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ -#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ - -/* All producer/comsumer pointers are the same bitfield */ -#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ -#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ -#define IOC4_PROD_CONS_PTR_OFF 3 - -/* Bitmasks for IOC4_SRCIR_<3:0> */ -#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ - -/* Bitmasks for IOC4_SHADOW_<3:0> */ -#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ -#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ -#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ -#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ -#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ -#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ -#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ -#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ -#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ -#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ -#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ -#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ -#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ -#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ -#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ - -/* Bitmasks for IOC4_SRTR_<3:0> */ -#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ -#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ -#define IOC4_SRTR_CNT_VAL_SHIFT 16 -#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ - -/* Serial port register map used for DMA and PIO serial I/O */ -struct ioc4_serialregs { - uint32_t sscr; - uint32_t stpir; - uint32_t stcir; - uint32_t srpir; - uint32_t srcir; - uint32_t srtr; - uint32_t shadow; -}; - -/* IOC4 UART register map */ -struct ioc4_uartregs { - char i4u_lcr; - union { - char iir; /* read only */ - char fcr; /* write only */ - } u3; - union { - char ier; /* DLAB == 0 */ - char dlm; /* DLAB == 1 */ - } u2; - union { - char rbr; /* read only, DLAB == 0 */ - char thr; /* write only, DLAB == 0 */ - char dll; /* DLAB == 1 */ - } u1; - char i4u_scr; - char i4u_msr; - char i4u_lsr; - char i4u_mcr; -}; - -/* short names */ -#define i4u_dll u1.dll -#define i4u_ier u2.ier -#define i4u_dlm u2.dlm -#define i4u_fcr u3.fcr - -/* Serial port registers used for DMA serial I/O */ -struct ioc4_serial { - uint32_t sbbr01_l; - uint32_t sbbr01_h; - uint32_t sbbr23_l; - uint32_t sbbr23_h; - - struct ioc4_serialregs port_0; - struct ioc4_serialregs port_1; - struct ioc4_serialregs port_2; - struct ioc4_serialregs port_3; - struct ioc4_uartregs uart_0; - struct ioc4_uartregs uart_1; - struct ioc4_uartregs uart_2; - struct ioc4_uartregs uart_3; -} ioc4_serial; - -/* UART clock speed */ -#define IOC4_SER_XIN_CLK_66 66666667 -#define IOC4_SER_XIN_CLK_33 33333333 - -#define IOC4_W_IES 0 -#define IOC4_W_IEC 1 - -typedef void ioc4_intr_func_f(void *, uint32_t); -typedef ioc4_intr_func_f *ioc4_intr_func_t; - -static unsigned int Num_of_ioc4_cards; - -/* defining this will get you LOTS of great debug info */ -//#define DEBUG_INTERRUPTS -#define DPRINT_CONFIG(_x...) ; -//#define DPRINT_CONFIG(_x...) printk _x - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* number of characters we want to transmit to the lower level at a time */ -#define IOC4_MAX_CHARS 256 -#define IOC4_FIFO_CHARS 255 - -/* Device name we're using */ -#define DEVICE_NAME_RS232 "ttyIOC" -#define DEVICE_NAME_RS422 "ttyAIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR_RS232 50 -#define DEVICE_MINOR_RS422 84 - - -/* register offsets */ -#define IOC4_SERIAL_OFFSET 0x300 - -/* flags for next_char_state */ -#define NCS_BREAK 0x1 -#define NCS_PARITY 0x2 -#define NCS_FRAMING 0x4 -#define NCS_OVERRUN 0x8 - -/* cause we need SOME parameters ... */ -#define MIN_BAUD_SUPPORTED 1200 -#define MAX_BAUD_SUPPORTED 115200 - -/* protocol types supported */ -#define PROTO_RS232 3 -#define PROTO_RS422 7 - -/* Notification types */ -#define N_DATA_READY 0x01 -#define N_OUTPUT_LOWAT 0x02 -#define N_BREAK 0x04 -#define N_PARITY_ERROR 0x08 -#define N_FRAMING_ERROR 0x10 -#define N_OVERRUN_ERROR 0x20 -#define N_DDCD 0x40 -#define N_DCTS 0x80 - -#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ - N_PARITY_ERROR | N_FRAMING_ERROR | \ - N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define N_ALL_OUTPUT N_OUTPUT_LOWAT - -#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) - -#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ - N_PARITY_ERROR | N_FRAMING_ERROR | \ - N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) -#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) - -/* Some masks */ -#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ - | UART_LCR_WLEN7 | UART_LCR_WLEN8) -#define LCR_MASK_STOP_BITS (UART_LCR_STOP) - -#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb) -#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw) - -/* Default to 4k buffers */ -#ifdef IOC4_1K_BUFFERS -#define RING_BUF_SIZE 1024 -#define IOC4_BUF_SIZE_BIT 0 -#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K -#else -#define RING_BUF_SIZE 4096 -#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE -#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K -#endif - -#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) - -/* - * This is the entry saved by the driver - one per card - */ - -#define UART_PORT_MIN 0 -#define UART_PORT_RS232 UART_PORT_MIN -#define UART_PORT_RS422 1 -#define UART_PORT_COUNT 2 /* one for each mode */ - -struct ioc4_control { - int ic_irq; - struct { - /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ - struct uart_port icp_uart_port[UART_PORT_COUNT]; - /* Handy reference material */ - struct ioc4_port *icp_port; - } ic_port[IOC4_NUM_SERIAL_PORTS]; - struct ioc4_soft *ic_soft; -}; - -/* - * per-IOC4 data structure - */ -#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) -struct ioc4_soft { - struct ioc4_misc_regs __iomem *is_ioc4_misc_addr; - struct ioc4_serial __iomem *is_ioc4_serial_addr; - - /* Each interrupt type has an entry in the array */ - struct ioc4_intr_type { - - /* - * Each in-use entry in this array contains at least - * one nonzero bit in sd_bits; no two entries in this - * array have overlapping sd_bits values. - */ - struct ioc4_intr_info { - uint32_t sd_bits; - ioc4_intr_func_f *sd_intr; - void *sd_info; - } is_intr_info[MAX_IOC4_INTR_ENTS]; - - /* Number of entries active in the above array */ - atomic_t is_num_intrs; - } is_intr_type[IOC4_NUM_INTR_TYPES]; - - /* is_ir_lock must be held while - * modifying sio_ie values, so - * we can be sure that sio_ie is - * not changing when we read it - * along with sio_ir. - */ - spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ -}; - -/* Local port info for each IOC4 serial ports */ -struct ioc4_port { - struct uart_port *ip_port; /* current active port ptr */ - /* Ptrs for all ports */ - struct uart_port *ip_all_ports[UART_PORT_COUNT]; - /* Back ptrs for this port */ - struct ioc4_control *ip_control; - struct pci_dev *ip_pdev; - struct ioc4_soft *ip_ioc4_soft; - - /* pci mem addresses */ - struct ioc4_misc_regs __iomem *ip_mem; - struct ioc4_serial __iomem *ip_serial; - struct ioc4_serialregs __iomem *ip_serial_regs; - struct ioc4_uartregs __iomem *ip_uart_regs; - - /* Ring buffer page for this port */ - dma_addr_t ip_dma_ringbuf; - /* vaddr of ring buffer */ - struct ring_buffer *ip_cpu_ringbuf; - - /* Rings for this port */ - struct ring *ip_inring; - struct ring *ip_outring; - - /* Hook to port specific values */ - struct hooks *ip_hooks; - - spinlock_t ip_lock; - - /* Various rx/tx parameters */ - int ip_baud; - int ip_tx_lowat; - int ip_rx_timeout; - - /* Copy of notification bits */ - int ip_notify; - - /* Shadow copies of various registers so we don't need to PIO - * read them constantly - */ - uint32_t ip_ienb; /* Enabled interrupts */ - uint32_t ip_sscr; - uint32_t ip_tx_prod; - uint32_t ip_rx_cons; - int ip_pci_bus_speed; - unsigned char ip_flags; -}; - -/* tx low water mark. We need to notify the driver whenever tx is getting - * close to empty so it can refill the tx buffer and keep things going. - * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll - * have no trouble getting in more chars in time (I certainly hope so). - */ -#define TX_LOWAT_LATENCY 1000 -#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) -#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) - -/* Flags per port */ -#define INPUT_HIGH 0x01 -#define DCD_ON 0x02 -#define LOWAT_WRITTEN 0x04 -#define READ_ABORTED 0x08 -#define PORT_ACTIVE 0x10 -#define PORT_INACTIVE 0 /* This is the value when "off" */ - - -/* Since each port has different register offsets and bitmasks - * for everything, we'll store those that we need in tables so we - * don't have to be constantly checking the port we are dealing with. - */ -struct hooks { - uint32_t intr_delta_dcd; - uint32_t intr_delta_cts; - uint32_t intr_tx_mt; - uint32_t intr_rx_timer; - uint32_t intr_rx_high; - uint32_t intr_tx_explicit; - uint32_t intr_dma_error; - uint32_t intr_clear; - uint32_t intr_all; - int rs422_select_pin; -}; - -static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { - /* Values for port 0 */ - { - IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, - IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, - IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, - IOC4_OTHER_IR_S0_MEMERR, - (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | - IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | - IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | - IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), - IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, - }, - - /* Values for port 1 */ - { - IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, - IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, - IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, - IOC4_OTHER_IR_S1_MEMERR, - (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | - IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | - IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | - IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), - IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, - }, - - /* Values for port 2 */ - { - IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, - IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, - IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, - IOC4_OTHER_IR_S2_MEMERR, - (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | - IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | - IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | - IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), - IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, - }, - - /* Values for port 3 */ - { - IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, - IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, - IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, - IOC4_OTHER_IR_S3_MEMERR, - (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | - IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | - IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | - IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), - IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, - } -}; - -/* A ring buffer entry */ -struct ring_entry { - union { - struct { - uint32_t alldata; - uint32_t allsc; - } all; - struct { - char data[4]; /* data bytes */ - char sc[4]; /* status/control */ - } s; - } u; -}; - -/* Test the valid bits in any of the 4 sc chars using "allsc" member */ -#define RING_ANY_VALID \ - ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) - -#define ring_sc u.s.sc -#define ring_data u.s.data -#define ring_allsc u.all.allsc - -/* Number of entries per ring buffer. */ -#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) - -/* An individual ring */ -struct ring { - struct ring_entry entries[ENTRIES_PER_RING]; -}; - -/* The whole enchilada */ -struct ring_buffer { - struct ring TX_0_OR_2; - struct ring RX_0_OR_2; - struct ring TX_1_OR_3; - struct ring RX_1_OR_3; -}; - -/* Get a ring from a port struct */ -#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) - -/* Infinite loop detection. - */ -#define MAXITER 10000000 - -/* Prototypes */ -static void receive_chars(struct uart_port *); -static void handle_intr(void *arg, uint32_t sio_ir); - -/* - * port_is_active - determines if this port is currently active - * @port: ptr to soft struct for this port - * @uart_port: uart port to test for - */ -static inline int port_is_active(struct ioc4_port *port, - struct uart_port *uart_port) -{ - if (port) { - if ((port->ip_flags & PORT_ACTIVE) - && (port->ip_port == uart_port)) - return 1; - } - return 0; -} - - -/** - * write_ireg - write the interrupt regs - * @ioc4_soft: ptr to soft struct for this port - * @val: value to write - * @which: which register - * @type: which ireg set - */ -static inline void -write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) -{ - struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr; - unsigned long flags; - - spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); - - switch (type) { - case IOC4_SIO_INTR_TYPE: - switch (which) { - case IOC4_W_IES: - writel(val, &mem->sio_ies.raw); - break; - - case IOC4_W_IEC: - writel(val, &mem->sio_iec.raw); - break; - } - break; - - case IOC4_OTHER_INTR_TYPE: - switch (which) { - case IOC4_W_IES: - writel(val, &mem->other_ies.raw); - break; - - case IOC4_W_IEC: - writel(val, &mem->other_iec.raw); - break; - } - break; - - default: - break; - } - spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); -} - -/** - * set_baud - Baud rate setting code - * @port: port to set - * @baud: baud rate to use - */ -static int set_baud(struct ioc4_port *port, int baud) -{ - int actual_baud; - int diff; - int lcr; - unsigned short divisor; - struct ioc4_uartregs __iomem *uart; - - divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); - if (!divisor) - return 1; - actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); - - diff = actual_baud - baud; - if (diff < 0) - diff = -diff; - - /* If we're within 1%, we've found a match */ - if (diff * 100 > actual_baud) - return 1; - - uart = port->ip_uart_regs; - lcr = readb(&uart->i4u_lcr); - writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); - writeb((unsigned char)divisor, &uart->i4u_dll); - writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); - writeb(lcr, &uart->i4u_lcr); - return 0; -} - - -/** - * get_ioc4_port - given a uart port, return the control structure - * @port: uart port - * @set: set this port as current - */ -static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) -{ - struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); - struct ioc4_control *control = idd->idd_serial_data; - struct ioc4_port *port; - int port_num, port_type; - - if (control) { - for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; - port_num++ ) { - port = control->ic_port[port_num].icp_port; - if (!port) - continue; - for (port_type = UART_PORT_MIN; - port_type < UART_PORT_COUNT; - port_type++) { - if (the_port == port->ip_all_ports - [port_type]) { - /* set local copy */ - if (set) { - port->ip_port = the_port; - } - return port; - } - } - } - } - return NULL; -} - -/* The IOC4 hardware provides no atomic way to determine if interrupts - * are pending since two reads are required to do so. The handler must - * read the SIO_IR and the SIO_IES, and take the logical and of the - * two. When this value is zero, all interrupts have been serviced and - * the handler may return. - * - * This has the unfortunate "hole" that, if some other CPU or - * some other thread or some higher level interrupt manages to - * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may - * think we have observed SIO_IR&SIO_IE==0 when in fact this - * condition never really occurred. - * - * To solve this, we use a simple spinlock that must be held - * whenever modifying SIO_IE; holding this lock while observing - * both SIO_IR and SIO_IE guarantees that we do not falsely - * conclude that no enabled interrupts are pending. - */ - -static inline uint32_t -pending_intrs(struct ioc4_soft *soft, int type) -{ - struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - unsigned long flag; - uint32_t intrs = 0; - - BUG_ON(!((type == IOC4_SIO_INTR_TYPE) - || (type == IOC4_OTHER_INTR_TYPE))); - - spin_lock_irqsave(&soft->is_ir_lock, flag); - - switch (type) { - case IOC4_SIO_INTR_TYPE: - intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw); - break; - - case IOC4_OTHER_INTR_TYPE: - intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw); - - /* Don't process any ATA interrupte */ - intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); - break; - - default: - break; - } - spin_unlock_irqrestore(&soft->is_ir_lock, flag); - return intrs; -} - -/** - * port_init - Initialize the sio and ioc4 hardware for a given port - * called per port from attach... - * @port: port to initialize - */ -static int inline port_init(struct ioc4_port *port) -{ - uint32_t sio_cr; - struct hooks *hooks = port->ip_hooks; - struct ioc4_uartregs __iomem *uart; - - /* Idle the IOC4 serial interface */ - writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); - - /* Wait until any pending bus activity for this port has ceased */ - do - sio_cr = readl(&port->ip_mem->sio_cr.raw); - while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); - - /* Finish reset sequence */ - writel(0, &port->ip_serial_regs->sscr); - - /* Once RESET is done, reload cached tx_prod and rx_cons values - * and set rings to empty by making prod == cons - */ - port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); - port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); - - /* Disable interrupts for this 16550 */ - uart = port->ip_uart_regs; - writeb(0, &uart->i4u_lcr); - writeb(0, &uart->i4u_ier); - - /* Set the default baud */ - set_baud(port, port->ip_baud); - - /* Set line control to 8 bits no parity */ - writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Enable the FIFOs */ - writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); - /* then reset 16550 FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - &uart->i4u_fcr); - - /* Clear modem control register */ - writeb(0, &uart->i4u_mcr); - - /* Clear deltas in modem status register */ - readb(&uart->i4u_msr); - - /* Only do this once per port pair */ - if (port->ip_hooks == &hooks_array[0] - || port->ip_hooks == &hooks_array[2]) { - unsigned long ring_pci_addr; - uint32_t __iomem *sbbr_l; - uint32_t __iomem *sbbr_h; - - if (port->ip_hooks == &hooks_array[0]) { - sbbr_l = &port->ip_serial->sbbr01_l; - sbbr_h = &port->ip_serial->sbbr01_h; - } else { - sbbr_l = &port->ip_serial->sbbr23_l; - sbbr_h = &port->ip_serial->sbbr23_h; - } - - ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; - DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", - __func__, ring_pci_addr)); - - writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); - writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); - } - - /* Set the receive timeout value to 10 msec */ - writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); - - /* Set rx threshold, enable DMA */ - /* Set high water mark at 3/4 of full ring */ - port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Disable and clear all serial related interrupt bits */ - write_ireg(port->ip_ioc4_soft, hooks->intr_clear, - IOC4_W_IEC, IOC4_SIO_INTR_TYPE); - port->ip_ienb &= ~hooks->intr_clear; - writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw); - return 0; -} - -/** - * handle_dma_error_intr - service any pending DMA error interrupts for the - * given port - 2nd level called via sd_intr - * @arg: handler arg - * @other_ir: ioc4regs - */ -static void handle_dma_error_intr(void *arg, uint32_t other_ir) -{ - struct ioc4_port *port = (struct ioc4_port *)arg; - struct hooks *hooks = port->ip_hooks; - unsigned long flags; - - spin_lock_irqsave(&port->ip_lock, flags); - - /* ACK the interrupt */ - writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw); - - if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) { - printk(KERN_ERR - "PCI error address is 0x%llx, " - "master is serial port %c %s\n", - (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) - << 32) - | readl(&port->ip_mem->pci_err_addr_l.raw)) - & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + - ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) & - IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), - (readl(&port->ip_mem->pci_err_addr_l.raw) - & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) - ? "RX" : "TX"); - - if (readl(&port->ip_mem->pci_err_addr_l.raw) - & IOC4_PCI_ERR_ADDR_MUL_ERR) { - printk(KERN_ERR - "Multiple errors occurred\n"); - } - } - spin_unlock_irqrestore(&port->ip_lock, flags); - - /* Re-enable DMA error interrupts */ - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, - IOC4_OTHER_INTR_TYPE); -} - -/** - * intr_connect - interrupt connect function - * @soft: soft struct for this card - * @type: interrupt type - * @intrbits: bit pattern to set - * @intr: handler function - * @info: handler arg - */ -static void -intr_connect(struct ioc4_soft *soft, int type, - uint32_t intrbits, ioc4_intr_func_f * intr, void *info) -{ - int i; - struct ioc4_intr_info *intr_ptr; - - BUG_ON(!((type == IOC4_SIO_INTR_TYPE) - || (type == IOC4_OTHER_INTR_TYPE))); - - i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; - BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); - - /* Save off the lower level interrupt handler */ - intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; - intr_ptr->sd_bits = intrbits; - intr_ptr->sd_intr = intr; - intr_ptr->sd_info = info; -} - -/** - * ioc4_intr - Top level IOC4 interrupt handler. - * @irq: irq value - * @arg: handler arg - */ - -static irqreturn_t ioc4_intr(int irq, void *arg) -{ - struct ioc4_soft *soft; - uint32_t this_ir, this_mir; - int xx, num_intrs = 0; - int intr_type; - int handled = 0; - struct ioc4_intr_info *intr_info; - - soft = arg; - for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { - num_intrs = (int)atomic_read( - &soft->is_intr_type[intr_type].is_num_intrs); - - this_mir = this_ir = pending_intrs(soft, intr_type); - - /* Farm out the interrupt to the various drivers depending on - * which interrupt bits are set. - */ - for (xx = 0; xx < num_intrs; xx++) { - intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; - if ((this_mir = this_ir & intr_info->sd_bits)) { - /* Disable owned interrupts, call handler */ - handled++; - write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, - intr_type); - intr_info->sd_intr(intr_info->sd_info, this_mir); - this_ir &= ~this_mir; - } - } - } -#ifdef DEBUG_INTERRUPTS - { - struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - unsigned long flag; - - spin_lock_irqsave(&soft->is_ir_lock, flag); - printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " - "other_ir 0x%x other_ies 0x%x mask 0x%x\n", - __func__, __LINE__, - (void *)mem, readl(&mem->sio_ir.raw), - readl(&mem->sio_ies.raw), - readl(&mem->other_ir.raw), - readl(&mem->other_ies.raw), - IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); - spin_unlock_irqrestore(&soft->is_ir_lock, flag); - } -#endif - return handled ? IRQ_HANDLED : IRQ_NONE; -} - -/** - * ioc4_attach_local - Device initialization. - * Called at *_attach() time for each - * IOC4 with serial ports in the system. - * @idd: Master module data for this IOC4 - */ -static int inline ioc4_attach_local(struct ioc4_driver_data *idd) -{ - struct ioc4_port *port; - struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; - int port_number; - uint16_t ioc4_revid_min = 62; - uint16_t ioc4_revid; - struct pci_dev *pdev = idd->idd_pdev; - struct ioc4_control* control = idd->idd_serial_data; - struct ioc4_soft *soft = control->ic_soft; - void __iomem *ioc4_misc = idd->idd_misc_regs; - void __iomem *ioc4_serial = soft->is_ioc4_serial_addr; - - /* IOC4 firmware must be at least rev 62 */ - pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); - - printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); - if (ioc4_revid < ioc4_revid_min) { - printk(KERN_WARNING - "IOC4 serial not supported on firmware rev %d, " - "please upgrade to rev %d or higher\n", - ioc4_revid, ioc4_revid_min); - return -EPERM; - } - BUG_ON(ioc4_misc == NULL); - BUG_ON(ioc4_serial == NULL); - - /* Create port structures for each port */ - for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; - port_number++) { - port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL); - if (!port) { - printk(KERN_WARNING - "IOC4 serial memory not available for port\n"); - return -ENOMEM; - } - spin_lock_init(&port->ip_lock); - - /* we need to remember the previous ones, to point back to - * them farther down - setting up the ring buffers. - */ - ports[port_number] = port; - - /* Allocate buffers and jumpstart the hardware. */ - control->ic_port[port_number].icp_port = port; - port->ip_ioc4_soft = soft; - port->ip_pdev = pdev; - port->ip_ienb = 0; - /* Use baud rate calculations based on detected PCI - * bus speed. Simply test whether the PCI clock is - * running closer to 66MHz or 33MHz. - */ - if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) { - port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66; - } else { - port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33; - } - port->ip_baud = 9600; - port->ip_control = control; - port->ip_mem = ioc4_misc; - port->ip_serial = ioc4_serial; - - /* point to the right hook */ - port->ip_hooks = &hooks_array[port_number]; - - /* Get direct hooks to the serial regs and uart regs - * for this port - */ - switch (port_number) { - case 0: - port->ip_serial_regs = &(port->ip_serial->port_0); - port->ip_uart_regs = &(port->ip_serial->uart_0); - break; - case 1: - port->ip_serial_regs = &(port->ip_serial->port_1); - port->ip_uart_regs = &(port->ip_serial->uart_1); - break; - case 2: - port->ip_serial_regs = &(port->ip_serial->port_2); - port->ip_uart_regs = &(port->ip_serial->uart_2); - break; - default: - case 3: - port->ip_serial_regs = &(port->ip_serial->port_3); - port->ip_uart_regs = &(port->ip_serial->uart_3); - break; - } - - /* ring buffers are 1 to a pair of ports */ - if (port_number && (port_number & 1)) { - /* odd use the evens buffer */ - port->ip_dma_ringbuf = - ports[port_number - 1]->ip_dma_ringbuf; - port->ip_cpu_ringbuf = - ports[port_number - 1]->ip_cpu_ringbuf; - port->ip_inring = RING(port, RX_1_OR_3); - port->ip_outring = RING(port, TX_1_OR_3); - - } else { - if (port->ip_dma_ringbuf == 0) { - port->ip_cpu_ringbuf = pci_alloc_consistent - (pdev, TOTAL_RING_BUF_SIZE, - &port->ip_dma_ringbuf); - - } - BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & - (TOTAL_RING_BUF_SIZE - 1)) == 0)); - DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf)); - port->ip_inring = RING(port, RX_0_OR_2); - port->ip_outring = RING(port, TX_0_OR_2); - } - DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", - __func__, - port_number, (void *)port, (void *)control)); - DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* Initialize the hardware for IOC4 */ - port_init(port); - - DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " - "outring 0x%p\n", - __func__, - port_number, (void *)port, - (void *)port->ip_inring, - (void *)port->ip_outring)); - - /* Attach interrupt handlers */ - intr_connect(soft, IOC4_SIO_INTR_TYPE, - GET_SIO_IR(port_number), - handle_intr, port); - - intr_connect(soft, IOC4_OTHER_INTR_TYPE, - GET_OTHER_IR(port_number), - handle_dma_error_intr, port); - } - return 0; -} - -/** - * enable_intrs - enable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void enable_intrs(struct ioc4_port *port, uint32_t mask) -{ - struct hooks *hooks = port->ip_hooks; - - if ((port->ip_ienb & mask) != mask) { - write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, - IOC4_SIO_INTR_TYPE); - port->ip_ienb |= mask; - } - - if (port->ip_ienb) - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, - IOC4_W_IES, IOC4_OTHER_INTR_TYPE); -} - -/** - * local_open - local open a port - * @port: port to open - */ -static inline int local_open(struct ioc4_port *port) -{ - int spiniter = 0; - - port->ip_flags = PORT_ACTIVE; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while((readl(&port->ip_serial_regs-> sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) { - port->ip_flags = PORT_INACTIVE; - return -1; - } - } - } - - /* Reset the input fifo. If the uart received chars while the port - * was closed and DMA is not enabled, the uart may have a bunch of - * chars hanging around in its rx fifo which will not be discarded - * by rclr in the upper layer. We must get rid of them here. - */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, - &port->ip_uart_regs->i4u_fcr); - - writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Re-enable DMA, set default threshold to intr whenever there is - * data available. - */ - port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; - port->ip_sscr |= 1; /* default threshold */ - - /* Plug in the new sscr. This implicitly clears the DMA_PAUSE - * flag if it was set above - */ - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - port->ip_tx_lowat = 1; - return 0; -} - -/** - * set_rx_timeout - Set rx timeout and threshold values. - * @port: port to use - * @timeout: timeout value in ticks - */ -static inline int set_rx_timeout(struct ioc4_port *port, int timeout) -{ - int threshold; - - port->ip_rx_timeout = timeout; - - /* Timeout is in ticks. Let's figure out how many chars we - * can receive at the current baud rate in that interval - * and set the rx threshold to that amount. There are 4 chars - * per ring entry, so we'll divide the number of chars that will - * arrive in timeout by 4. - * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. - */ - threshold = timeout * port->ip_baud / 4000; - if (threshold == 0) - threshold = 1; /* otherwise we'll intr all the time! */ - - if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) - return 1; - - port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; - port->ip_sscr |= threshold; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Now set the rx timeout to the given value - * again timeout * IOC4_SRTR_HZ / HZ - */ - timeout = timeout * IOC4_SRTR_HZ / 100; - if (timeout > IOC4_SRTR_CNT) - timeout = IOC4_SRTR_CNT; - - writel(timeout, &port->ip_serial_regs->srtr); - return 0; -} - -/** - * config_port - config the hardware - * @port: port to config - * @baud: baud rate for the port - * @byte_size: data size - * @stop_bits: number of stop bits - * @parenb: parity enable ? - * @parodd: odd parity ? - */ -static inline int -config_port(struct ioc4_port *port, - int baud, int byte_size, int stop_bits, int parenb, int parodd) -{ - char lcr, sizebits; - int spiniter = 0; - - DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", - __func__, baud, byte_size, stop_bits, parenb, parodd)); - - if (set_baud(port, baud)) - return 1; - - switch (byte_size) { - case 5: - sizebits = UART_LCR_WLEN5; - break; - case 6: - sizebits = UART_LCR_WLEN6; - break; - case 7: - sizebits = UART_LCR_WLEN7; - break; - case 8: - sizebits = UART_LCR_WLEN8; - break; - default: - return 1; - } - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while((readl(&port->ip_serial_regs->sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - - /* Clear relevant fields in lcr */ - lcr = readb(&port->ip_uart_regs->i4u_lcr); - lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | - UART_LCR_PARITY | LCR_MASK_STOP_BITS); - - /* Set byte size in lcr */ - lcr |= sizebits; - - /* Set parity */ - if (parenb) { - lcr |= UART_LCR_PARITY; - if (!parodd) - lcr |= UART_LCR_EPAR; - } - - /* Set stop bits */ - if (stop_bits) - lcr |= UART_LCR_STOP /* 2 stop bits */ ; - - writeb(lcr, &port->ip_uart_regs->i4u_lcr); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - port->ip_baud = baud; - - /* When we get within this number of ring entries of filling the - * entire ring on tx, place an EXPLICIT intr to generate a lowat - * notification when output has drained. - */ - port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; - if (port->ip_tx_lowat == 0) - port->ip_tx_lowat = 1; - - set_rx_timeout(port, 2); - - return 0; -} - -/** - * do_write - Write bytes to the port. Returns the number of bytes - * actually written. Called from transmit_chars - * @port: port to use - * @buf: the stuff to write - * @len: how many bytes in 'buf' - */ -static inline int do_write(struct ioc4_port *port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total = 0; - struct ring *outring; - struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; - - BUG_ON(!(len >= 0)); - - prod_ptr = port->ip_tx_prod; - cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - outring = port->ip_outring; - - /* Maintain a 1-entry red-zone. The ring buffer is full when - * (cons - prod) % ring_size is 1. Rather than do this subtraction - * in the body of the loop, I'll do it now. - */ - cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; - - /* Stuff the bytes into the output */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - int xx; - - /* Get 4 bytes (one ring entry) at a time */ - entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); - - /* Invalidate all entries */ - entry->ring_allsc = 0; - - /* Copy in some bytes */ - for (xx = 0; (xx < 4) && (len > 0); xx++) { - entry->ring_data[xx] = *buf++; - entry->ring_sc[xx] = IOC4_TXCB_VALID; - len--; - total++; - } - - /* If we are within some small threshold of filling up the - * entire ring buffer, we must place an EXPLICIT intr here - * to generate a lowat interrupt in case we subsequently - * really do fill up the ring and the caller goes to sleep. - * No need to place more than one though. - */ - if (!(port->ip_flags & LOWAT_WRITTEN) && - ((cons_ptr - prod_ptr) & PROD_CONS_MASK) - <= port->ip_tx_lowat - * (int)sizeof(struct ring_entry)) { - port->ip_flags |= LOWAT_WRITTEN; - entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; - } - - /* Go on to next entry */ - prod_ptr += sizeof(struct ring_entry); - prod_ptr &= PROD_CONS_MASK; - } - - /* If we sent something, start DMA if necessary */ - if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { - port->ip_sscr |= IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - - /* Store the new producer pointer. If tx is disabled, we stuff the - * data into the ring buffer, but we don't actually start tx. - */ - if (!uart_tx_stopped(port->ip_port)) { - writel(prod_ptr, &port->ip_serial_regs->stpir); - - /* If we are now transmitting, enable tx_mt interrupt so we - * can disable DMA if necessary when the tx finishes. - */ - if (total > 0) - enable_intrs(port, hooks->intr_tx_mt); - } - port->ip_tx_prod = prod_ptr; - return total; -} - -/** - * disable_intrs - disable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void disable_intrs(struct ioc4_port *port, uint32_t mask) -{ - struct hooks *hooks = port->ip_hooks; - - if (port->ip_ienb & mask) { - write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, - IOC4_SIO_INTR_TYPE); - port->ip_ienb &= ~mask; - } - - if (!port->ip_ienb) - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, - IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); -} - -/** - * set_notification - Modify event notification - * @port: port to use - * @mask: events mask - * @set_on: set ? - */ -static int set_notification(struct ioc4_port *port, int mask, int set_on) -{ - struct hooks *hooks = port->ip_hooks; - uint32_t intrbits, sscrbits; - - BUG_ON(!mask); - - intrbits = sscrbits = 0; - - if (mask & N_DATA_READY) - intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); - if (mask & N_OUTPUT_LOWAT) - intrbits |= hooks->intr_tx_explicit; - if (mask & N_DDCD) { - intrbits |= hooks->intr_delta_dcd; - sscrbits |= IOC4_SSCR_RX_RING_DCD; - } - if (mask & N_DCTS) - intrbits |= hooks->intr_delta_cts; - - if (set_on) { - enable_intrs(port, intrbits); - port->ip_notify |= mask; - port->ip_sscr |= sscrbits; - } else { - disable_intrs(port, intrbits); - port->ip_notify &= ~mask; - port->ip_sscr &= ~sscrbits; - } - - /* We require DMA if either DATA_READY or DDCD notification is - * currently requested. If neither of these is requested and - * there is currently no tx in progress, DMA may be disabled. - */ - if (port->ip_notify & (N_DATA_READY | N_DDCD)) - port->ip_sscr |= IOC4_SSCR_DMA_EN; - else if (!(port->ip_ienb & hooks->intr_tx_mt)) - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - return 0; -} - -/** - * set_mcr - set the master control reg - * @the_port: port to use - * @mask1: mcr mask - * @mask2: shadow mask - */ -static inline int set_mcr(struct uart_port *the_port, - int mask1, int mask2) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - uint32_t shadow; - int spiniter = 0; - char mcr; - - if (!port) - return -1; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - shadow = readl(&port->ip_serial_regs->shadow); - mcr = (shadow & 0xff000000) >> 24; - - /* Set new value */ - mcr |= mask1; - shadow |= mask2; - - writeb(mcr, &port->ip_uart_regs->i4u_mcr); - writel(shadow, &port->ip_serial_regs->shadow); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - return 0; -} - -/** - * ioc4_set_proto - set the protocol for the port - * @port: port to use - * @proto: protocol to use - */ -static int ioc4_set_proto(struct ioc4_port *port, int proto) -{ - struct hooks *hooks = port->ip_hooks; - - switch (proto) { - case PROTO_RS232: - /* Clear the appropriate GIO pin */ - writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); - break; - - case PROTO_RS422: - /* Set the appropriate GIO pin */ - writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); - break; - - default: - return 1; - } - return 0; -} - -/** - * transmit_chars - upper level write, called with ip_lock - * @the_port: port to write - */ -static void transmit_chars(struct uart_port *the_port) -{ - int xmit_count, tail, head; - int result; - char *start; - struct tty_struct *tty; - struct ioc4_port *port = get_ioc4_port(the_port, 0); - struct uart_state *state; - - if (!the_port) - return; - if (!port) - return; - - state = the_port->state; - tty = state->port.tty; - - if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { - /* Nothing to do or hw stopped */ - set_notification(port, N_ALL_OUTPUT, 0); - return; - } - - head = state->xmit.head; - tail = state->xmit.tail; - start = (char *)&state->xmit.buf[tail]; - - /* write out all the data or until the end of the buffer */ - xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); - if (xmit_count > 0) { - result = do_write(port, start, xmit_count); - if (result > 0) { - /* booking */ - xmit_count -= result; - the_port->icount.tx += result; - /* advance the pointers */ - tail += result; - tail &= UART_XMIT_SIZE - 1; - state->xmit.tail = tail; - start = (char *)&state->xmit.buf[tail]; - } - } - if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(the_port); - - if (uart_circ_empty(&state->xmit)) { - set_notification(port, N_OUTPUT_LOWAT, 0); - } else { - set_notification(port, N_OUTPUT_LOWAT, 1); - } -} - -/** - * ioc4_change_speed - change the speed of the port - * @the_port: port to change - * @new_termios: new termios settings - * @old_termios: old termios settings - */ -static void -ioc4_change_speed(struct uart_port *the_port, - struct ktermios *new_termios, struct ktermios *old_termios) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - int baud, bits; - unsigned cflag, iflag; - int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; - struct uart_state *state = the_port->state; - - cflag = new_termios->c_cflag; - iflag = new_termios->c_iflag; - - switch (cflag & CSIZE) { - case CS5: - new_data = 5; - bits = 7; - break; - case CS6: - new_data = 6; - bits = 8; - break; - case CS7: - new_data = 7; - bits = 9; - break; - case CS8: - new_data = 8; - bits = 10; - break; - default: - /* cuz we always need a default ... */ - new_data = 5; - bits = 7; - break; - } - if (cflag & CSTOPB) { - bits++; - new_stop = 1; - } - if (cflag & PARENB) { - bits++; - new_parity_enable = 1; - if (cflag & PARODD) - new_parity = 1; - } - baud = uart_get_baud_rate(the_port, new_termios, old_termios, - MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); - - /* default is 9600 */ - if (!baud) - baud = 9600; - - if (!the_port->fifosize) - the_port->fifosize = IOC4_FIFO_CHARS; - the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); - the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ - - the_port->ignore_status_mask = N_ALL_INPUT; - - state->port.tty->low_latency = 1; - - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~(N_PARITY_ERROR - | N_FRAMING_ERROR); - if (iflag & IGNBRK) { - the_port->ignore_status_mask &= ~N_BREAK; - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; - } - if (!(cflag & CREAD)) { - /* ignore everything */ - the_port->ignore_status_mask &= ~N_DATA_READY; - } - - if (cflag & CRTSCTS) { - port->ip_sscr |= IOC4_SSCR_HFC_EN; - } - else { - port->ip_sscr &= ~IOC4_SSCR_HFC_EN; - } - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Set the configuration and proper notification call */ - DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " - "config_port(baud %d data %d stop %d p enable %d parity %d)," - " notification 0x%x\n", - __func__, (void *)port, cflag, baud, new_data, new_stop, - new_parity_enable, new_parity, the_port->ignore_status_mask)); - - if ((config_port(port, baud, /* baud */ - new_data, /* byte size */ - new_stop, /* stop bits */ - new_parity_enable, /* set parity */ - new_parity)) >= 0) { /* parity 1==odd */ - set_notification(port, the_port->ignore_status_mask, 1); - } -} - -/** - * ic4_startup_local - Start up the serial port - returns >= 0 if no errors - * @the_port: Port to operate on - */ -static inline int ic4_startup_local(struct uart_port *the_port) -{ - struct ioc4_port *port; - struct uart_state *state; - - if (!the_port) - return -1; - - port = get_ioc4_port(the_port, 0); - if (!port) - return -1; - - state = the_port->state; - - local_open(port); - - /* set the protocol - mapbase has the port type */ - ioc4_set_proto(port, the_port->mapbase); - - /* set the speed of the serial port */ - ioc4_change_speed(the_port, state->port.tty->termios, - (struct ktermios *)0); - - return 0; -} - -/* - * ioc4_cb_output_lowat - called when the output low water mark is hit - * @the_port: port to output - */ -static void ioc4_cb_output_lowat(struct uart_port *the_port) -{ - unsigned long pflags; - - /* ip_lock is set on the call here */ - if (the_port) { - spin_lock_irqsave(&the_port->lock, pflags); - transmit_chars(the_port); - spin_unlock_irqrestore(&the_port->lock, pflags); - } -} - -/** - * handle_intr - service any interrupts for the given port - 2nd level - * called via sd_intr - * @arg: handler arg - * @sio_ir: ioc4regs - */ -static void handle_intr(void *arg, uint32_t sio_ir) -{ - struct ioc4_port *port = (struct ioc4_port *)arg; - struct hooks *hooks = port->ip_hooks; - unsigned int rx_high_rd_aborted = 0; - unsigned long flags; - struct uart_port *the_port; - int loop_counter; - - /* Possible race condition here: The tx_mt interrupt bit may be - * cleared without the intervention of the interrupt handler, - * e.g. by a write. If the top level interrupt handler reads a - * tx_mt, then some other processor does a write, starting up - * output, then we come in here, see the tx_mt and stop DMA, the - * output started by the other processor will hang. Thus we can - * only rely on tx_mt being legitimate if it is read while the - * port lock is held. Therefore this bit must be ignored in the - * passed in interrupt mask which was read by the top level - * interrupt handler since the port lock was not held at the time - * it was read. We can only rely on this bit being accurate if it - * is read while the port lock is held. So we'll clear it for now, - * and reload it later once we have the port lock. - */ - sio_ir &= ~(hooks->intr_tx_mt); - - spin_lock_irqsave(&port->ip_lock, flags); - - loop_counter = MAXITER; /* to avoid hangs */ - - do { - uint32_t shadow; - - if ( loop_counter-- <= 0 ) { - printk(KERN_WARNING "IOC4 serial: " - "possible hang condition/" - "port stuck on interrupt.\n"); - break; - } - - /* Handle a DCD change */ - if (sio_ir & hooks->intr_delta_dcd) { - /* ACK the interrupt */ - writel(hooks->intr_delta_dcd, - &port->ip_mem->sio_ir.raw); - - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DDCD) - && (shadow & IOC4_SHADOW_DCD) - && (port->ip_port)) { - the_port = port->ip_port; - the_port->icount.dcd = 1; - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } else if ((port->ip_notify & N_DDCD) - && !(shadow & IOC4_SHADOW_DCD)) { - /* Flag delta DCD/no DCD */ - port->ip_flags |= DCD_ON; - } - } - - /* Handle a CTS change */ - if (sio_ir & hooks->intr_delta_cts) { - /* ACK the interrupt */ - writel(hooks->intr_delta_cts, - &port->ip_mem->sio_ir.raw); - - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DCTS) - && (port->ip_port)) { - the_port = port->ip_port; - the_port->icount.cts = - (shadow & IOC4_SHADOW_CTS) ? 1 : 0; - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } - } - - /* rx timeout interrupt. Must be some data available. Put this - * before the check for rx_high since servicing this condition - * may cause that condition to clear. - */ - if (sio_ir & hooks->intr_rx_timer) { - /* ACK the interrupt */ - writel(hooks->intr_rx_timer, - &port->ip_mem->sio_ir.raw); - - if ((port->ip_notify & N_DATA_READY) - && (port->ip_port)) { - /* ip_lock is set on call here */ - receive_chars(port->ip_port); - } - } - - /* rx high interrupt. Must be after rx_timer. */ - else if (sio_ir & hooks->intr_rx_high) { - /* Data available, notify upper layer */ - if ((port->ip_notify & N_DATA_READY) - && port->ip_port) { - /* ip_lock is set on call here */ - receive_chars(port->ip_port); - } - - /* We can't ACK this interrupt. If receive_chars didn't - * cause the condition to clear, we'll have to disable - * the interrupt until the data is drained. - * If the read was aborted, don't disable the interrupt - * as this may cause us to hang indefinitely. An - * aborted read generally means that this interrupt - * hasn't been delivered to the cpu yet anyway, even - * though we see it as asserted when we read the sio_ir. - */ - if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { - if ((port->ip_flags & READ_ABORTED) == 0) { - port->ip_ienb &= ~hooks->intr_rx_high; - port->ip_flags |= INPUT_HIGH; - } else { - rx_high_rd_aborted++; - } - } - } - - /* We got a low water interrupt: notify upper layer to - * send more data. Must come before tx_mt since servicing - * this condition may cause that condition to clear. - */ - if (sio_ir & hooks->intr_tx_explicit) { - port->ip_flags &= ~LOWAT_WRITTEN; - - /* ACK the interrupt */ - writel(hooks->intr_tx_explicit, - &port->ip_mem->sio_ir.raw); - - if (port->ip_notify & N_OUTPUT_LOWAT) - ioc4_cb_output_lowat(port->ip_port); - } - - /* Handle tx_mt. Must come after tx_explicit. */ - else if (sio_ir & hooks->intr_tx_mt) { - /* If we are expecting a lowat notification - * and we get to this point it probably means that for - * some reason the tx_explicit didn't work as expected - * (that can legitimately happen if the output buffer is - * filled up in just the right way). - * So send the notification now. - */ - if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc4_cb_output_lowat(port->ip_port); - - /* We need to reload the sio_ir since the lowat - * call may have caused another write to occur, - * clearing the tx_mt condition. - */ - sio_ir = PENDING(port); - } - - /* If the tx_mt condition still persists even after the - * lowat call, we've got some work to do. - */ - if (sio_ir & hooks->intr_tx_mt) { - - /* If we are not currently expecting DMA input, - * and the transmitter has just gone idle, - * there is no longer any reason for DMA, so - * disable it. - */ - if (!(port->ip_notify - & (N_DATA_READY | N_DDCD))) { - BUG_ON(!(port->ip_sscr - & IOC4_SSCR_DMA_EN)); - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, - &port->ip_serial_regs->sscr); - } - - /* Prevent infinite tx_mt interrupt */ - port->ip_ienb &= ~hooks->intr_tx_mt; - } - } - sio_ir = PENDING(port); - - /* if the read was aborted and only hooks->intr_rx_high, - * clear hooks->intr_rx_high, so we do not loop forever. - */ - - if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { - sio_ir &= ~hooks->intr_rx_high; - } - } while (sio_ir & hooks->intr_all); - - spin_unlock_irqrestore(&port->ip_lock, flags); - - /* Re-enable interrupts before returning from interrupt handler. - * Getting interrupted here is okay. It'll just v() our semaphore, and - * we'll come through the loop again. - */ - - write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, - IOC4_SIO_INTR_TYPE); -} - -/* - * ioc4_cb_post_ncs - called for some basic errors - * @port: port to use - * @ncs: event - */ -static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) -{ - struct uart_icount *icount; - - icount = &the_port->icount; - - if (ncs & NCS_BREAK) - icount->brk++; - if (ncs & NCS_FRAMING) - icount->frame++; - if (ncs & NCS_OVERRUN) - icount->overrun++; - if (ncs & NCS_PARITY) - icount->parity++; -} - -/** - * do_read - Read in bytes from the port. Return the number of bytes - * actually read. - * @the_port: port to use - * @buf: place to put the stuff we read - * @len: how big 'buf' is - */ - -static inline int do_read(struct uart_port *the_port, unsigned char *buf, - int len) -{ - int prod_ptr, cons_ptr, total; - struct ioc4_port *port = get_ioc4_port(the_port, 0); - struct ring *inring; - struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; - int byte_num; - char *sc; - int loop_counter; - - BUG_ON(!(len >= 0)); - BUG_ON(!port); - - /* There is a nasty timing issue in the IOC4. When the rx_timer - * expires or the rx_high condition arises, we take an interrupt. - * At some point while servicing the interrupt, we read bytes from - * the ring buffer and re-arm the rx_timer. However the rx_timer is - * not started until the first byte is received *after* it is armed, - * and any bytes pending in the rx construction buffers are not drained - * to memory until either there are 4 bytes available or the rx_timer - * expires. This leads to a potential situation where data is left - * in the construction buffers forever - 1 to 3 bytes were received - * after the interrupt was generated but before the rx_timer was - * re-armed. At that point as long as no subsequent bytes are received - * the timer will never be started and the bytes will remain in the - * construction buffer forever. The solution is to execute a DRAIN - * command after rearming the timer. This way any bytes received before - * the DRAIN will be drained to memory, and any bytes received after - * the DRAIN will start the TIMER and be drained when it expires. - * Luckily, this only needs to be done when the DMA buffer is empty - * since there is no requirement that this function return all - * available data as long as it returns some. - */ - /* Re-arm the timer */ - writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); - - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - cons_ptr = port->ip_rx_cons; - - if (prod_ptr == cons_ptr) { - int reset_dma = 0; - - /* Input buffer appears empty, do a flush. */ - - /* DMA must be enabled for this to work. */ - if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { - port->ip_sscr |= IOC4_SSCR_DMA_EN; - reset_dma = 1; - } - - /* Potential race condition: we must reload the srpir after - * issuing the drain command, otherwise we could think the rx - * buffer is empty, then take a very long interrupt, and when - * we come back it's full and we wait forever for the drain to - * complete. - */ - writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, - &port->ip_serial_regs->sscr); - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - - /* We must not wait for the DRAIN to complete unless there are - * at least 8 bytes (2 ring entries) available to receive the - * data otherwise the DRAIN will never complete and we'll - * deadlock here. - * In fact, to make things easier, I'll just ignore the flush if - * there is any data at all now available. - */ - if (prod_ptr == cons_ptr) { - loop_counter = 0; - while (readl(&port->ip_serial_regs->sscr) & - IOC4_SSCR_RX_DRAIN) { - loop_counter++; - if (loop_counter > MAXITER) - return -1; - } - - /* SIGH. We have to reload the prod_ptr *again* since - * the drain may have caused it to change - */ - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - } - if (reset_dma) { - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - } - inring = port->ip_inring; - port->ip_flags &= ~READ_ABORTED; - - total = 0; - loop_counter = 0xfffff; /* to avoid hangs */ - - /* Grab bytes from the hardware */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); - - if ( loop_counter-- <= 0 ) { - printk(KERN_WARNING "IOC4 serial: " - "possible hang condition/" - "port stuck on read.\n"); - break; - } - - /* According to the producer pointer, this ring entry - * must contain some data. But if the PIO happened faster - * than the DMA, the data may not be available yet, so let's - * wait until it arrives. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - /* Indicate the read is aborted so we don't disable - * the interrupt thinking that the consumer is - * congested. - */ - port->ip_flags |= READ_ABORTED; - len = 0; - break; - } - - /* Load the bytes/status out of the ring entry */ - for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { - sc = &(entry->ring_sc[byte_num]); - - /* Check for change in modem state or overrun */ - if ((*sc & IOC4_RXSB_MODEM_VALID) - && (port->ip_notify & N_DDCD)) { - /* Notify upper layer if DCD dropped */ - - if ((port->ip_flags & DCD_ON) - && !(*sc & IOC4_RXSB_DCD)) { - - /* If we have already copied some data, - * return it. We'll pick up the carrier - * drop on the next pass. That way we - * don't throw away the data that has - * already been copied back to - * the caller's buffer. - */ - if (total > 0) { - len = 0; - break; - } - port->ip_flags &= ~DCD_ON; - - /* Turn off this notification so the - * carrier drop protocol won't see it - * again when it does a read. - */ - *sc &= ~IOC4_RXSB_MODEM_VALID; - - /* To keep things consistent, we need - * to update the consumer pointer so - * the next reader won't come in and - * try to read the same ring entries - * again. This must be done here before - * the dcd change. - */ - - if ((entry->ring_allsc & RING_ANY_VALID) - == 0) { - cons_ptr += (int)sizeof - (struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - writel(cons_ptr, - &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* Notify upper layer of carrier drop */ - if ((port->ip_notify & N_DDCD) - && port->ip_port) { - the_port->icount.dcd = 0; - wake_up_interruptible - (&the_port->state-> - port.delta_msr_wait); - } - - /* If we had any data to return, we - * would have returned it above. - */ - return 0; - } - } - if (*sc & IOC4_RXSB_MODEM_VALID) { - /* Notify that an input overrun occurred */ - if ((*sc & IOC4_RXSB_OVERRUN) - && (port->ip_notify & N_OVERRUN_ERROR)) { - ioc4_cb_post_ncs(the_port, NCS_OVERRUN); - } - /* Don't look at this byte again */ - *sc &= ~IOC4_RXSB_MODEM_VALID; - } - - /* Check for valid data or RX errors */ - if ((*sc & IOC4_RXSB_DATA_VALID) && - ((*sc & (IOC4_RXSB_PAR_ERR - | IOC4_RXSB_FRAME_ERR - | IOC4_RXSB_BREAK)) - && (port->ip_notify & (N_PARITY_ERROR - | N_FRAMING_ERROR - | N_BREAK)))) { - /* There is an error condition on the next byte. - * If we have already transferred some bytes, - * we'll stop here. Otherwise if this is the - * first byte to be read, we'll just transfer - * it alone after notifying the - * upper layer of its status. - */ - if (total > 0) { - len = 0; - break; - } else { - if ((*sc & IOC4_RXSB_PAR_ERR) && - (port->ip_notify & N_PARITY_ERROR)) { - ioc4_cb_post_ncs(the_port, - NCS_PARITY); - } - if ((*sc & IOC4_RXSB_FRAME_ERR) && - (port->ip_notify & N_FRAMING_ERROR)){ - ioc4_cb_post_ncs(the_port, - NCS_FRAMING); - } - if ((*sc & IOC4_RXSB_BREAK) - && (port->ip_notify & N_BREAK)) { - ioc4_cb_post_ncs - (the_port, - NCS_BREAK); - } - len = 1; - } - } - if (*sc & IOC4_RXSB_DATA_VALID) { - *sc &= ~IOC4_RXSB_DATA_VALID; - *buf = entry->ring_data[byte_num]; - buf++; - len--; - total++; - } - } - - /* If we used up this entry entirely, go on to the next one, - * otherwise we must have run out of buffer space, so - * leave the consumer pointer here for the next read in case - * there are still unread bytes in this entry. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - cons_ptr += (int)sizeof(struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - } - - /* Update consumer pointer and re-arm rx timer interrupt */ - writel(cons_ptr, &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* If we have now dipped below the rx high water mark and we have - * rx_high interrupt turned off, we can now turn it back on again. - */ - if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) - & PROD_CONS_MASK) < ((port->ip_sscr & - IOC4_SSCR_RX_THRESHOLD) - << IOC4_PROD_CONS_PTR_OFF))) { - port->ip_flags &= ~INPUT_HIGH; - enable_intrs(port, hooks->intr_rx_high); - } - return total; -} - -/** - * receive_chars - upper level read. Called with ip_lock. - * @the_port: port to read from - */ -static void receive_chars(struct uart_port *the_port) -{ - struct tty_struct *tty; - unsigned char ch[IOC4_MAX_CHARS]; - int read_count, request_count = IOC4_MAX_CHARS; - struct uart_icount *icount; - struct uart_state *state = the_port->state; - unsigned long pflags; - - /* Make sure all the pointers are "good" ones */ - if (!state) - return; - if (!state->port.tty) - return; - - spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - - request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); - - if (request_count > 0) { - icount = &the_port->icount; - read_count = do_read(the_port, ch, request_count); - if (read_count > 0) { - tty_insert_flip_string(tty, ch, read_count); - icount->rx += read_count; - } - } - - spin_unlock_irqrestore(&the_port->lock, pflags); - - tty_flip_buffer_push(tty); -} - -/** - * ic4_type - What type of console are we? - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *ic4_type(struct uart_port *the_port) -{ - if (the_port->mapbase == PROTO_RS232) - return "SGI IOC4 Serial [rs232]"; - else - return "SGI IOC4 Serial [rs422]"; -} - -/** - * ic4_tx_empty - Is the transmitter empty? - * @port: Port to operate on - * - */ -static unsigned int ic4_tx_empty(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - unsigned int ret = 0; - - if (port_is_active(port, the_port)) { - if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) - ret = TIOCSER_TEMT; - } - return ret; -} - -/** - * ic4_stop_tx - stop the transmitter - * @port: Port to operate on - * - */ -static void ic4_stop_tx(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - - if (port_is_active(port, the_port)) - set_notification(port, N_OUTPUT_LOWAT, 0); -} - -/** - * null_void_function - - * @port: Port to operate on - * - */ -static void null_void_function(struct uart_port *the_port) -{ -} - -/** - * ic4_shutdown - shut down the port - free irq and disable - * @port: Port to shut down - * - */ -static void ic4_shutdown(struct uart_port *the_port) -{ - unsigned long port_flags; - struct ioc4_port *port; - struct uart_state *state; - - port = get_ioc4_port(the_port, 0); - if (!port) - return; - - state = the_port->state; - port->ip_port = NULL; - - wake_up_interruptible(&state->port.delta_msr_wait); - - if (state->port.tty) - set_bit(TTY_IO_ERROR, &state->port.tty->flags); - - spin_lock_irqsave(&the_port->lock, port_flags); - set_notification(port, N_ALL, 0); - port->ip_flags = PORT_INACTIVE; - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic4_set_mctrl - set control lines (dtr, rts, etc) - * @port: Port to operate on - * @mctrl: Lines to set/unset - * - */ -static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) -{ - unsigned char mcr = 0; - struct ioc4_port *port; - - port = get_ioc4_port(the_port, 0); - if (!port_is_active(port, the_port)) - return; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - set_mcr(the_port, mcr, IOC4_SHADOW_DTR); -} - -/** - * ic4_get_mctrl - get control line info - * @port: port to operate on - * - */ -static unsigned int ic4_get_mctrl(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - uint32_t shadow; - unsigned int ret = 0; - - if (!port_is_active(port, the_port)) - return 0; - - shadow = readl(&port->ip_serial_regs->shadow); - if (shadow & IOC4_SHADOW_DCD) - ret |= TIOCM_CAR; - if (shadow & IOC4_SHADOW_DR) - ret |= TIOCM_DSR; - if (shadow & IOC4_SHADOW_CTS) - ret |= TIOCM_CTS; - return ret; -} - -/** - * ic4_start_tx - Start transmitter, flush any output - * @port: Port to operate on - * - */ -static void ic4_start_tx(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - - if (port_is_active(port, the_port)) { - set_notification(port, N_OUTPUT_LOWAT, 1); - enable_intrs(port, port->ip_hooks->intr_tx_mt); - } -} - -/** - * ic4_break_ctl - handle breaks - * @port: Port to operate on - * @break_state: Break state - * - */ -static void ic4_break_ctl(struct uart_port *the_port, int break_state) -{ -} - -/** - * ic4_startup - Start up the serial port - * @port: Port to operate on - * - */ -static int ic4_startup(struct uart_port *the_port) -{ - int retval; - struct ioc4_port *port; - struct ioc4_control *control; - struct uart_state *state; - unsigned long port_flags; - - if (!the_port) - return -ENODEV; - port = get_ioc4_port(the_port, 1); - if (!port) - return -ENODEV; - state = the_port->state; - - control = port->ip_control; - if (!control) { - port->ip_port = NULL; - return -ENODEV; - } - - /* Start up the serial port */ - spin_lock_irqsave(&the_port->lock, port_flags); - retval = ic4_startup_local(the_port); - spin_unlock_irqrestore(&the_port->lock, port_flags); - return retval; -} - -/** - * ic4_set_termios - set termios stuff - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -ic4_set_termios(struct uart_port *the_port, - struct ktermios *termios, struct ktermios *old_termios) -{ - unsigned long port_flags; - - spin_lock_irqsave(&the_port->lock, port_flags); - ioc4_change_speed(the_port, termios, old_termios); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic4_request_port - allocate resources for port - no op.... - * @port: port to operate on - * - */ -static int ic4_request_port(struct uart_port *port) -{ - return 0; -} - -/* Associate the uart functions above - given to serial core */ - -static struct uart_ops ioc4_ops = { - .tx_empty = ic4_tx_empty, - .set_mctrl = ic4_set_mctrl, - .get_mctrl = ic4_get_mctrl, - .stop_tx = ic4_stop_tx, - .start_tx = ic4_start_tx, - .stop_rx = null_void_function, - .enable_ms = null_void_function, - .break_ctl = ic4_break_ctl, - .startup = ic4_startup, - .shutdown = ic4_shutdown, - .set_termios = ic4_set_termios, - .type = ic4_type, - .release_port = null_void_function, - .request_port = ic4_request_port, -}; - -/* - * Boot-time initialization code - */ - -static struct uart_driver ioc4_uart_rs232 = { - .owner = THIS_MODULE, - .driver_name = "ioc4_serial_rs232", - .dev_name = DEVICE_NAME_RS232, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR_RS232, - .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, -}; - -static struct uart_driver ioc4_uart_rs422 = { - .owner = THIS_MODULE, - .driver_name = "ioc4_serial_rs422", - .dev_name = DEVICE_NAME_RS422, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR_RS422, - .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, -}; - - -/** - * ioc4_serial_remove_one - detach function - * - * @idd: IOC4 master module data for this IOC4 - */ - -static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) -{ - int port_num, port_type; - struct ioc4_control *control; - struct uart_port *the_port; - struct ioc4_port *port; - struct ioc4_soft *soft; - - /* If serial driver did not attach, don't try to detach */ - control = idd->idd_serial_data; - if (!control) - return 0; - - for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { - for (port_type = UART_PORT_MIN; - port_type < UART_PORT_COUNT; - port_type++) { - the_port = &control->ic_port[port_num].icp_uart_port - [port_type]; - if (the_port) { - switch (port_type) { - case UART_PORT_RS422: - uart_remove_one_port(&ioc4_uart_rs422, - the_port); - break; - default: - case UART_PORT_RS232: - uart_remove_one_port(&ioc4_uart_rs232, - the_port); - break; - } - } - } - port = control->ic_port[port_num].icp_port; - /* we allocate in pairs */ - if (!(port_num & 1) && port) { - pci_free_consistent(port->ip_pdev, - TOTAL_RING_BUF_SIZE, - port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - } - } - soft = control->ic_soft; - if (soft) { - free_irq(control->ic_irq, soft); - if (soft->is_ioc4_serial_addr) { - iounmap(soft->is_ioc4_serial_addr); - release_mem_region((unsigned long) - soft->is_ioc4_serial_addr, - sizeof(struct ioc4_serial)); - } - kfree(soft); - } - kfree(control); - idd->idd_serial_data = NULL; - - return 0; -} - - -/** - * ioc4_serial_core_attach_rs232 - register with serial core - * This is done during pci probing - * @pdev: handle for this card - */ -static inline int -ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) -{ - struct ioc4_port *port; - struct uart_port *the_port; - struct ioc4_driver_data *idd = pci_get_drvdata(pdev); - struct ioc4_control *control = idd->idd_serial_data; - int port_num; - int port_type_idx; - struct uart_driver *u_driver; - - - DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", - __func__, pdev, (void *)control)); - - if (!control) - return -ENODEV; - - port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 - : UART_PORT_RS422; - - u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 - : &ioc4_uart_rs422; - - /* once around for each port on this card */ - for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { - the_port = &control->ic_port[port_num].icp_uart_port - [port_type_idx]; - port = control->ic_port[port_num].icp_port; - port->ip_all_ports[port_type_idx] = the_port; - - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", - __func__, (void *)the_port, - (void *)port, - port_type == PROTO_RS232 ? "rs232" : "rs422")); - - /* membase, iobase and mapbase just need to be non-0 */ - the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | port_num; - the_port->line = (Num_of_ioc4_cards << 2) | port_num; - the_port->mapbase = port_type; - the_port->type = PORT_16550A; - the_port->fifosize = IOC4_FIFO_CHARS; - the_port->ops = &ioc4_ops; - the_port->irq = control->ic_irq; - the_port->dev = &pdev->dev; - spin_lock_init(&the_port->lock); - if (uart_add_one_port(u_driver, the_port) < 0) { - printk(KERN_WARNING - "%s: unable to add port %d bus %d\n", - __func__, the_port->line, pdev->bus->number); - } else { - DPRINT_CONFIG( - ("IOC4 serial port %d irq = %d, bus %d\n", - the_port->line, the_port->irq, pdev->bus->number)); - } - } - return 0; -} - -/** - * ioc4_serial_attach_one - register attach function - * called per card found from IOC4 master module. - * @idd: Master module data for this IOC4 - */ -int -ioc4_serial_attach_one(struct ioc4_driver_data *idd) -{ - unsigned long tmp_addr1; - struct ioc4_serial __iomem *serial; - struct ioc4_soft *soft; - struct ioc4_control *control; - int ret = 0; - - - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, - idd->idd_pci_id)); - - /* PCI-RT does not bring out serial connections. - * Do not attach to this particular IOC4. - */ - if (idd->idd_variant == IOC4_VARIANT_PCI_RT) - return 0; - - /* request serial registers */ - tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; - - if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial), - "sioc4_uart")) { - printk(KERN_WARNING - "ioc4 (%p): unable to get request region for " - "uart space\n", (void *)idd->idd_pdev); - ret = -ENODEV; - goto out1; - } - serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); - if (!serial) { - printk(KERN_WARNING - "ioc4 (%p) : unable to remap ioc4 serial register\n", - (void *)idd->idd_pdev); - ret = -ENODEV; - goto out2; - } - DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __func__, (void *)idd->idd_misc_regs, - (void *)serial)); - - /* Get memory for the new card */ - control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL); - - if (!control) { - printk(KERN_WARNING "ioc4_attach_one" - ": unable to get memory for the IOC4\n"); - ret = -ENOMEM; - goto out2; - } - idd->idd_serial_data = control; - - /* Allocate the soft structure */ - soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL); - if (!soft) { - printk(KERN_WARNING - "ioc4 (%p): unable to get memory for the soft struct\n", - (void *)idd->idd_pdev); - ret = -ENOMEM; - goto out3; - } - - spin_lock_init(&soft->is_ir_lock); - soft->is_ioc4_misc_addr = idd->idd_misc_regs; - soft->is_ioc4_serial_addr = serial; - - /* Init the IOC4 */ - writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, - &idd->idd_misc_regs->sio_cr.raw); - - /* Enable serial port mode select generic PIO pins as outputs */ - writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL - | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, - &idd->idd_misc_regs->gpcr_s.raw); - - /* Clear and disable all serial interrupts */ - write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); - writel(~0, &idd->idd_misc_regs->sio_ir.raw); - write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC, - IOC4_OTHER_INTR_TYPE); - writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw); - control->ic_soft = soft; - - /* Hook up interrupt handler */ - if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED, - "sgi-ioc4serial", soft)) { - control->ic_irq = idd->idd_pdev->irq; - } else { - printk(KERN_WARNING - "%s : request_irq fails for IRQ 0x%x\n ", - __func__, idd->idd_pdev->irq); - } - ret = ioc4_attach_local(idd); - if (ret) - goto out4; - - /* register port with the serial core - 1 rs232, 1 rs422 */ - - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) - goto out4; - - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) - goto out5; - - Num_of_ioc4_cards++; - - return ret; - - /* error exits that give back resources */ -out5: - ioc4_serial_remove_one(idd); -out4: - kfree(soft); -out3: - kfree(control); -out2: - if (serial) - iounmap(serial); - release_mem_region(tmp_addr1, sizeof(struct ioc4_serial)); -out1: - - return ret; -} - - -static struct ioc4_submodule ioc4_serial_submodule = { - .is_name = "IOC4_serial", - .is_owner = THIS_MODULE, - .is_probe = ioc4_serial_attach_one, - .is_remove = ioc4_serial_remove_one, -}; - -/** - * ioc4_serial_init - module init - */ -static int __init ioc4_serial_init(void) -{ - int ret; - - /* register with serial core */ - if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register rs232 IOC4 serial driver\n", - __func__); - goto out; - } - if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register rs422 IOC4 serial driver\n", - __func__); - goto out_uart_rs232; - } - - /* register with IOC4 main module */ - ret = ioc4_register_submodule(&ioc4_serial_submodule); - if (ret) - goto out_uart_rs422; - return 0; - -out_uart_rs422: - uart_unregister_driver(&ioc4_uart_rs422); -out_uart_rs232: - uart_unregister_driver(&ioc4_uart_rs232); -out: - return ret; -} - -static void __exit ioc4_serial_exit(void) -{ - ioc4_unregister_submodule(&ioc4_serial_submodule); - uart_unregister_driver(&ioc4_uart_rs232); - uart_unregister_driver(&ioc4_uart_rs422); -} - -late_initcall(ioc4_serial_init); /* Call only after tty init is done */ -module_exit(ioc4_serial_exit); - -MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); -MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c deleted file mode 100644 index ebff4a1..0000000 --- a/drivers/serial/ip22zilog.c +++ /dev/null @@ -1,1221 +0,0 @@ -/* - * Driver for Zilog serial chips found on SGI workstations and - * servers. This driver could actually be made more generic. - * - * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the - * old drivers/sgi/char/sgiserial.c code which itself is based of the original - * drivers/sbus/char/zs.c code. A lot of code has been simply moved over - * directly from there but much has been rewritten. Credits therefore go out - * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell - * for their work there. - * - * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "ip22zilog.h" - -/* - * On IP22 we need to delay after register accesses but we do not need to - * flush writes. - */ -#define ZSDELAY() udelay(5) -#define ZSDELAY_LONG() udelay(20) -#define ZS_WSYNC(channel) do { } while (0) - -#define NUM_IP22ZILOG 1 -#define NUM_CHANNELS (NUM_IP22ZILOG * 2) - -#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ -#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_ip22zilog_port { - struct uart_port port; - - /* IRQ servicing chain. */ - struct uart_ip22zilog_port *next; - - /* Current values of Zilog write registers. */ - unsigned char curregs[NUM_ZSREGS]; - - unsigned int flags; -#define IP22ZILOG_FLAG_IS_CONS 0x00000004 -#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 -#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 -#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 -#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 -#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 -#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 -#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 - - unsigned int tty_break; - - unsigned char parity_mask; - unsigned char prev_status; -}; - -#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) -#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) -#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ - (UART_ZILOG(PORT)->curregs[REGNUM]) -#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ - ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) -#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) - -/* Reading and writing Zilog8530 registers. The delays are to make this - * driver work on the IP22 which needs a settling delay after each chip - * register access, other machines handle this in hardware via auxiliary - * flip-flops which implement the settle time we do in software. - * - * The port lock must be held and local IRQs must be disabled - * when {read,write}_zsreg is invoked. - */ -static unsigned char read_zsreg(struct zilog_channel *channel, - unsigned char reg) -{ - unsigned char retval; - - writeb(reg, &channel->control); - ZSDELAY(); - retval = readb(&channel->control); - ZSDELAY(); - - return retval; -} - -static void write_zsreg(struct zilog_channel *channel, - unsigned char reg, unsigned char value) -{ - writeb(reg, &channel->control); - ZSDELAY(); - writeb(value, &channel->control); - ZSDELAY(); -} - -static void ip22zilog_clear_fifo(struct zilog_channel *channel) -{ - int i; - - for (i = 0; i < 32; i++) { - unsigned char regval; - - regval = readb(&channel->control); - ZSDELAY(); - if (regval & Rx_CH_AV) - break; - - regval = read_zsreg(channel, R1); - readb(&channel->data); - ZSDELAY(); - - if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - } -} - -/* This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) -{ - int i; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - ip22zilog_clear_fifo(channel); - - /* Disable all interrupts. */ - write_zsreg(channel, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(channel, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(channel, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(channel, R3, regs[R3] & ~RxENAB); - write_zsreg(channel, R5, regs[R5] & ~TxENAB); - - /* Synchronous mode config. */ - write_zsreg(channel, R6, regs[R6]); - write_zsreg(channel, R7, regs[R7]); - - /* Don't mess with the interrupt vector (R2, unused by us) and - * master interrupt control (R9). We make sure this is setup - * properly at probe time then never touch it again. - */ - - /* Disable baud generator. */ - write_zsreg(channel, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(channel, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(channel, R12, regs[R12]); - write_zsreg(channel, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(channel, R14, regs[R14]); - - /* External status interrupt control. */ - write_zsreg(channel, R15, regs[R15]); - - /* Reset external status interrupts. */ - write_zsreg(channel, R0, RES_EXT_INT); - write_zsreg(channel, R0, RES_EXT_INT); - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(channel, R3, regs[R3]); - write_zsreg(channel, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(channel, R1, regs[R1]); -} - -/* Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - if (!ZS_REGS_HELD(up)) { - if (ZS_TX_ACTIVE(up)) { - up->flags |= IP22ZILOG_FLAG_REGS_HELD; - } else { - __load_zsregs(channel, up->curregs); - } - } -} - -#define Rx_BRK 0x0100 /* BREAK event software flag. */ -#define Rx_SYS 0x0200 /* SysRq event software flag. */ - -static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - struct tty_struct *tty; - unsigned char ch, flag; - unsigned int r1; - - tty = NULL; - if (up->port.state != NULL && - up->port.state->port.tty != NULL) - tty = up->port.state->port.tty; - - for (;;) { - ch = readb(&channel->control); - ZSDELAY(); - if (!(ch & Rx_CH_AV)) - break; - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - - /* Handle the null char got when BREAK is removed. */ - if (!ch) - r1 |= up->tty_break; - - /* A real serial line, record the character and status. */ - flag = TTY_NORMAL; - up->port.icount.rx++; - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { - up->tty_break = 0; - - if (r1 & (Rx_SYS | Rx_BRK)) { - up->port.icount.brk++; - if (r1 & Rx_SYS) - continue; - r1 &= ~(PAR_ERR | CRC_ERR); - } - else if (r1 & PAR_ERR) - up->port.icount.parity++; - else if (r1 & CRC_ERR) - up->port.icount.frame++; - if (r1 & Rx_OVR) - up->port.icount.overrun++; - r1 &= up->port.read_status_mask; - if (r1 & Rx_BRK) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if (tty) - uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); - } - return tty; -} - -static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - unsigned char status; - - status = readb(&channel->control); - ZSDELAY(); - - writeb(RES_EXT_INT, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (up->curregs[R15] & BRKIE) { - if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { - if (uart_handle_break(&up->port)) - up->tty_break = Rx_SYS; - else - up->tty_break = Rx_BRK; - } - } - - if (ZS_WANTS_MODEM_STATUS(up)) { - if (status & SYNC) - up->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - */ - if ((status ^ up->prev_status) ^ DCD) - uart_handle_dcd_change(&up->port, - (status & DCD)); - if ((status ^ up->prev_status) ^ CTS) - uart_handle_cts_change(&up->port, - (status & CTS)); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - up->prev_status = status; -} - -static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - struct circ_buf *xmit; - - if (ZS_IS_CONS(up)) { - unsigned char status = readb(&channel->control); - ZSDELAY(); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(up)) { - __load_zsregs(channel, up->curregs); - up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(up)) { - up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - if (up->port.x_char) { - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - writeb(up->port.x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - - if (up->port.state == NULL) - goto ack_tx_int; - xmit = &up->port.state->xmit; - if (uart_circ_empty(xmit)) - goto ack_tx_int; - if (uart_tx_stopped(&up->port)) - goto ack_tx_int; - - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return; - -ack_tx_int: - writeb(RES_Tx_P, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) -{ - struct uart_ip22zilog_port *up = dev_id; - - while (up) { - struct zilog_channel *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - struct tty_struct *tty; - unsigned char r3; - - spin_lock(&up->port.lock); - r3 = read_zsreg(channel, R3); - - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHARxIP) - tty = ip22zilog_receive_chars(up, channel); - if (r3 & CHAEXT) - ip22zilog_status_handle(up, channel); - if (r3 & CHATxIP) - ip22zilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - /* Channel B */ - up = up->next; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock(&up->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHBRxIP) - tty = ip22zilog_receive_chars(up, channel); - if (r3 & CHBEXT) - ip22zilog_status_handle(up, channel); - if (r3 & CHBTxIP) - ip22zilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - up = up->next; - } - - return IRQ_HANDLED; -} - -/* A convenient way to quickly get R0 status. The caller must _not_ hold the - * port lock, it is acquired here. - */ -static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) -{ - struct zilog_channel *channel; - unsigned char status; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - status = readb(&channel->control); - ZSDELAY(); - - return status; -} - -/* The port lock is not held. */ -static unsigned int ip22zilog_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned char status; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - - status = ip22zilog_read_channel_status(port); - - spin_unlock_irqrestore(&port->lock, flags); - - if (status & Tx_BUF_EMP) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static unsigned int ip22zilog_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int ret; - - status = ip22zilog_read_channel_status(port); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC) - ret |= TIOCM_DSR; - if (status & CTS) - ret |= TIOCM_CTS; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits; - - set_bits = clear_bits = 0; - - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - up->curregs[R5] |= set_bits; - up->curregs[R5] &= ~clear_bits; - write_zsreg(channel, R5, up->curregs[R5]); -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_stop_tx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - - up->flags |= IP22ZILOG_FLAG_TX_STOPPED; -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_start_tx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char status; - - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; - - status = readb(&channel->control); - ZSDELAY(); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - writeb(port->x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - } -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_stop_rx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - struct zilog_channel *channel; - - if (ZS_IS_CONS(up)) - return; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable all RX interrupts. */ - up->curregs[R1] &= ~RxINT_MASK; - ip22zilog_maybe_update_regs(up, channel); -} - -/* The port lock is held. */ -static void ip22zilog_enable_ms(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char new_reg; - - new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != up->curregs[R15]) { - up->curregs[R15] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R15, up->curregs[R15]); - } -} - -/* The port lock is not held. */ -static void ip22zilog_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != up->curregs[R5]) { - up->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R5, up->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __ip22zilog_reset(struct uart_ip22zilog_port *up) -{ - struct zilog_channel *channel; - int i; - - if (up->flags & IP22ZILOG_FLAG_RESET_DONE) - return; - - /* Let pending transmits finish. */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - if (!ZS_IS_CHANNEL_A(up)) { - up++; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - } - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); - (void) read_zsreg(channel, R0); - - up->flags |= IP22ZILOG_FLAG_RESET_DONE; - up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; -} - -static void __ip22zilog_startup(struct uart_ip22zilog_port *up) -{ - struct zilog_channel *channel; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - __ip22zilog_reset(up); - - __load_zsregs(channel, up->curregs); - /* set master interrupt enable */ - write_zsreg(channel, R9, up->curregs[R9]); - up->prev_status = readb(&channel->control); - - /* Enable receiver and transmitter. */ - up->curregs[R3] |= RxENAB; - up->curregs[R5] |= TxENAB; - - up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - ip22zilog_maybe_update_regs(up, channel); -} - -static int ip22zilog_startup(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - unsigned long flags; - - if (ZS_IS_CONS(up)) - return 0; - - spin_lock_irqsave(&port->lock, flags); - __ip22zilog_startup(up); - spin_unlock_irqrestore(&port->lock, flags); - return 0; -} - -/* - * The test for ZS_IS_CONS is explained by the following e-mail: - ***** - * From: Russell King - * Date: Sun, 8 Dec 2002 10:18:38 +0000 - * - * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: - * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, - * > and I noticed that something is not right with reference - * > counting in this case. It seems that when the console - * > is open by kernel initially, this is not accounted - * > as an open, and uart_startup is not called. - * - * That is correct. We are unable to call uart_startup when the serial - * console is initialised because it may need to allocate memory (as - * request_irq does) and the memory allocators may not have been - * initialised. - * - * 1. initialise the port into a state where it can send characters in the - * console write method. - * - * 2. don't do the actual hardware shutdown in your shutdown() method (but - * do the normal software shutdown - ie, free irqs etc) - ***** - */ -static void ip22zilog_shutdown(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - struct zilog_channel *channel; - unsigned long flags; - - if (ZS_IS_CONS(up)) - return; - - spin_lock_irqsave(&port->lock, flags); - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable receiver and transmitter. */ - up->curregs[R3] &= ~RxENAB; - up->curregs[R5] &= ~TxENAB; - - /* Disable all interrupts and BRK assertion. */ - up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - up->curregs[R5] &= ~SND_BRK; - ip22zilog_maybe_update_regs(up, channel); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void -ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, - unsigned int iflag, int brg) -{ - - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - - /* Program BAUD and clock source. */ - up->curregs[R4] &= ~XCLK_MASK; - up->curregs[R4] |= X16CLK; - up->curregs[R12] = brg & 0xff; - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRENAB; - - /* Character size, stop bits, and parity. */ - up->curregs[3] &= ~RxN_MASK; - up->curregs[5] &= ~TxN_MASK; - switch (cflag & CSIZE) { - case CS5: - up->curregs[3] |= Rx5; - up->curregs[5] |= Tx5; - up->parity_mask = 0x1f; - break; - case CS6: - up->curregs[3] |= Rx6; - up->curregs[5] |= Tx6; - up->parity_mask = 0x3f; - break; - case CS7: - up->curregs[3] |= Rx7; - up->curregs[5] |= Tx7; - up->parity_mask = 0x7f; - break; - case CS8: - default: - up->curregs[3] |= Rx8; - up->curregs[5] |= Tx8; - up->parity_mask = 0xff; - break; - }; - up->curregs[4] &= ~0x0c; - if (cflag & CSTOPB) - up->curregs[4] |= SB2; - else - up->curregs[4] |= SB1; - if (cflag & PARENB) - up->curregs[4] |= PAR_ENAB; - else - up->curregs[4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - up->curregs[4] |= PAR_EVEN; - else - up->curregs[4] &= ~PAR_EVEN; - - up->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - up->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= BRK_ABRT; - - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask = 0xff; -} - -/* The port lock is not held. */ -static void -ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - unsigned long flags; - int baud, brg; - - baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - - spin_lock_irqsave(&up->port.lock, flags); - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); - - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; - else - up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; - - ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *ip22zilog_type(struct uart_port *port) -{ - return "IP22-Zilog"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void ip22zilog_release_port(struct uart_port *port) -{ -} - -static int ip22zilog_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void ip22zilog_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops ip22zilog_pops = { - .tx_empty = ip22zilog_tx_empty, - .set_mctrl = ip22zilog_set_mctrl, - .get_mctrl = ip22zilog_get_mctrl, - .stop_tx = ip22zilog_stop_tx, - .start_tx = ip22zilog_start_tx, - .stop_rx = ip22zilog_stop_rx, - .enable_ms = ip22zilog_enable_ms, - .break_ctl = ip22zilog_break_ctl, - .startup = ip22zilog_startup, - .shutdown = ip22zilog_shutdown, - .set_termios = ip22zilog_set_termios, - .type = ip22zilog_type, - .release_port = ip22zilog_release_port, - .request_port = ip22zilog_request_port, - .config_port = ip22zilog_config_port, - .verify_port = ip22zilog_verify_port, -}; - -static struct uart_ip22zilog_port *ip22zilog_port_table; -static struct zilog_layout **ip22zilog_chip_regs; - -static struct uart_ip22zilog_port *ip22zilog_irq_chain; -static int zilog_irq = -1; - -static void * __init alloc_one_table(unsigned long size) -{ - return kzalloc(size, GFP_KERNEL); -} - -static void __init ip22zilog_alloc_tables(void) -{ - ip22zilog_port_table = (struct uart_ip22zilog_port *) - alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); - ip22zilog_chip_regs = (struct zilog_layout **) - alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); - - if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { - panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); - } -} - -/* Get the address of the registers for IP22-Zilog instance CHIP. */ -static struct zilog_layout * __init get_zs(int chip) -{ - unsigned long base; - - if (chip < 0 || chip >= NUM_IP22ZILOG) { - panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); - } - - /* Not probe-able, hard code it. */ - base = (unsigned long) &sgioc->uart; - - zilog_irq = SGI_SERIAL_IRQ; - request_mem_region(base, 8, "IP22-Zilog"); - - return (struct zilog_layout *) base; -} - -#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ - -#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE -static void ip22zilog_put_char(struct uart_port *port, int ch) -{ - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - int loops = ZS_PUT_CHAR_MAX_DELAY; - - /* This is a timed polling loop so do not switch the explicit - * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM - */ - do { - unsigned char val = readb(&channel->control); - if (val & Tx_BUF_EMP) { - ZSDELAY(); - break; - } - udelay(5); - } while (--loops); - - writeb(ch, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static void -ip22zilog_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - uart_console_write(&up->port, s, count, ip22zilog_put_char); - udelay(2); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int __init ip22zilog_console_setup(struct console *con, char *options) -{ - struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - unsigned long flags; - int baud = 9600, bits = 8; - int parity = 'n'; - int flow = 'n'; - - up->flags |= IP22ZILOG_FLAG_IS_CONS; - - printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); - - spin_lock_irqsave(&up->port.lock, flags); - - up->curregs[R15] |= BRKIE; - - __ip22zilog_startup(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(&up->port, con, baud, parity, bits, flow); -} - -static struct uart_driver ip22zilog_reg; - -static struct console ip22zilog_console = { - .name = "ttyS", - .write = ip22zilog_console_write, - .device = uart_console_device, - .setup = ip22zilog_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ip22zilog_reg, -}; -#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ - -static struct uart_driver ip22zilog_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = NUM_CHANNELS, -#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE - .cons = &ip22zilog_console, -#endif -}; - -static void __init ip22zilog_prepare(void) -{ - struct uart_ip22zilog_port *up; - struct zilog_layout *rp; - int channel, chip; - - /* - * Temporary fix. - */ - for (channel = 0; channel < NUM_CHANNELS; channel++) - spin_lock_init(&ip22zilog_port_table[channel].port.lock); - - ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; - up = &ip22zilog_port_table[0]; - for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) - up[channel].next = &up[channel - 1]; - up[channel].next = NULL; - - for (chip = 0; chip < NUM_IP22ZILOG; chip++) { - if (!ip22zilog_chip_regs[chip]) { - ip22zilog_chip_regs[chip] = rp = get_zs(chip); - - up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; - up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; - - /* In theory mapbase is the physical address ... */ - up[(chip * 2) + 0].port.mapbase = - (unsigned long) ioremap((unsigned long) &rp->channelB, 8); - up[(chip * 2) + 1].port.mapbase = - (unsigned long) ioremap((unsigned long) &rp->channelA, 8); - } - - /* Channel A */ - up[(chip * 2) + 0].port.iotype = UPIO_MEM; - up[(chip * 2) + 0].port.irq = zilog_irq; - up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; - up[(chip * 2) + 0].port.fifosize = 1; - up[(chip * 2) + 0].port.ops = &ip22zilog_pops; - up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 0].port.flags = 0; - up[(chip * 2) + 0].port.line = (chip * 2) + 0; - up[(chip * 2) + 0].flags = 0; - - /* Channel B */ - up[(chip * 2) + 1].port.iotype = UPIO_MEM; - up[(chip * 2) + 1].port.irq = zilog_irq; - up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; - up[(chip * 2) + 1].port.fifosize = 1; - up[(chip * 2) + 1].port.ops = &ip22zilog_pops; - up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 1].port.line = (chip * 2) + 1; - up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; - } - - for (channel = 0; channel < NUM_CHANNELS; channel++) { - struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; - int brg; - - /* Normal serial TTY. */ - up->parity_mask = 0xff; - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R9] = NV | MIE; - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRENAB; - } -} - -static int __init ip22zilog_ports_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); - - ip22zilog_prepare(); - - if (request_irq(zilog_irq, ip22zilog_interrupt, 0, - "IP22-Zilog", ip22zilog_irq_chain)) { - panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); - } - - ret = uart_register_driver(&ip22zilog_reg); - if (ret == 0) { - int i; - - for (i = 0; i < NUM_CHANNELS; i++) { - struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; - - uart_add_one_port(&ip22zilog_reg, &up->port); - } - } - - return ret; -} - -static int __init ip22zilog_init(void) -{ - /* IP22 Zilog setup is hard coded, no probing to do. */ - ip22zilog_alloc_tables(); - ip22zilog_ports_init(); - - return 0; -} - -static void __exit ip22zilog_exit(void) -{ - int i; - struct uart_ip22zilog_port *up; - - for (i = 0; i < NUM_CHANNELS; i++) { - up = &ip22zilog_port_table[i]; - - uart_remove_one_port(&ip22zilog_reg, &up->port); - } - - /* Free IO mem */ - up = &ip22zilog_port_table[0]; - for (i = 0; i < NUM_IP22ZILOG; i++) { - if (up[(i * 2) + 0].port.mapbase) { - iounmap((void*)up[(i * 2) + 0].port.mapbase); - up[(i * 2) + 0].port.mapbase = 0; - } - if (up[(i * 2) + 1].port.mapbase) { - iounmap((void*)up[(i * 2) + 1].port.mapbase); - up[(i * 2) + 1].port.mapbase = 0; - } - } - - uart_unregister_driver(&ip22zilog_reg); -} - -module_init(ip22zilog_init); -module_exit(ip22zilog_exit); - -/* David wrote it but I'm to blame for the bugs ... */ -MODULE_AUTHOR("Ralf Baechle "); -MODULE_DESCRIPTION("SGI Zilog serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ip22zilog.h b/drivers/serial/ip22zilog.h deleted file mode 100644 index a59a9a8..0000000 --- a/drivers/serial/ip22zilog.h +++ /dev/null @@ -1,281 +0,0 @@ -#ifndef _IP22_ZILOG_H -#define _IP22_ZILOG_H - -#include - -struct zilog_channel { -#ifdef __BIG_ENDIAN - volatile unsigned char unused0[3]; - volatile unsigned char control; - volatile unsigned char unused1[3]; - volatile unsigned char data; -#else /* __LITTLE_ENDIAN */ - volatile unsigned char control; - volatile unsigned char unused0[3]; - volatile unsigned char data; - volatile unsigned char unused1[3]; -#endif -}; - -struct zilog_layout { - struct zilog_channel channelB; - struct zilog_channel channelA; -}; - -#define NUM_ZSREGS 16 - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENAB 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define ZCIE 2 /* Zero count IE */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x0e - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ - udelay(2); \ - readb(&channel->data); \ - udelay(2); \ - readb(&channel->data); \ - udelay(2); } while(0) - -#endif /* _IP22_ZILOG_H */ diff --git a/drivers/serial/jsm/Makefile b/drivers/serial/jsm/Makefile deleted file mode 100644 index e46b6e0..0000000 --- a/drivers/serial/jsm/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Jasmine adapter -# - -obj-$(CONFIG_SERIAL_JSM) += jsm.o - -jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o - diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h deleted file mode 100644 index 38a509c..0000000 --- a/drivers/serial/jsm/jsm.h +++ /dev/null @@ -1,388 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - ***********************************************************************/ - -#ifndef __JSM_DRIVER_H -#define __JSM_DRIVER_H - -#include -#include /* To pick up the varions Linux types */ -#include -#include -#include - -/* - * Debugging levels can be set using debug insmod variable - * They can also be compiled out completely. - */ -enum { - DBG_INIT = 0x01, - DBG_BASIC = 0x02, - DBG_CORE = 0x04, - DBG_OPEN = 0x08, - DBG_CLOSE = 0x10, - DBG_READ = 0x20, - DBG_WRITE = 0x40, - DBG_IOCTL = 0x80, - DBG_PROC = 0x100, - DBG_PARAM = 0x200, - DBG_PSCAN = 0x400, - DBG_EVENT = 0x800, - DBG_DRAIN = 0x1000, - DBG_MSIGS = 0x2000, - DBG_MGMT = 0x4000, - DBG_INTR = 0x8000, - DBG_CARR = 0x10000, -}; - -#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ - if ((DBG_##nlevel & jsm_debug)) \ - dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) - -#define MAXLINES 256 -#define MAXPORTS 8 -#define MAX_STOPS_SENT 5 - -/* Board type definitions */ - -#define T_NEO 0000 -#define T_CLASSIC 0001 -#define T_PCIBUS 0400 - -/* Board State Definitions */ - -#define BD_RUNNING 0x0 -#define BD_REASON 0x7f -#define BD_NOTFOUND 0x1 -#define BD_NOIOPORT 0x2 -#define BD_NOMEM 0x3 -#define BD_NOBIOS 0x4 -#define BD_NOFEP 0x5 -#define BD_FAILED 0x6 -#define BD_ALLOCATED 0x7 -#define BD_TRIBOOT 0x8 -#define BD_BADKME 0x80 - - -/* 4 extra for alignment play space */ -#define WRITEBUFLEN ((4096) + 4) -#define MYFLIPLEN N_TTY_BUF_SIZE - -#define JSM_VERSION "jsm: 1.2-1-INKERNEL" -#define JSM_PARTNUM "40002438_A-INKERNEL" - -struct jsm_board; -struct jsm_channel; - -/************************************************************************ - * Per board operations structure * - ************************************************************************/ -struct board_ops { - irq_handler_t intr; - void (*uart_init) (struct jsm_channel *ch); - void (*uart_off) (struct jsm_channel *ch); - void (*param) (struct jsm_channel *ch); - void (*assert_modem_signals) (struct jsm_channel *ch); - void (*flush_uart_write) (struct jsm_channel *ch); - void (*flush_uart_read) (struct jsm_channel *ch); - void (*disable_receiver) (struct jsm_channel *ch); - void (*enable_receiver) (struct jsm_channel *ch); - void (*send_break) (struct jsm_channel *ch); - void (*clear_break) (struct jsm_channel *ch, int); - void (*send_start_character) (struct jsm_channel *ch); - void (*send_stop_character) (struct jsm_channel *ch); - void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); - u32 (*get_uart_bytes_left) (struct jsm_channel *ch); - void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); -}; - - -/* - * Per-board information - */ -struct jsm_board -{ - int boardnum; /* Board number: 0-32 */ - - int type; /* Type of board */ - u8 rev; /* PCI revision ID */ - struct pci_dev *pci_dev; - u32 maxports; /* MAX ports this board can handle */ - - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and - * the interrupt routine from each other. - */ - - u32 nasync; /* Number of ports on card */ - - u32 irq; /* Interrupt request number */ - - u64 membase; /* Start of base memory of the card */ - u64 membase_end; /* End of base memory of the card */ - - u8 __iomem *re_map_membase;/* Remapped memory of the card */ - - u64 iobase; /* Start of io base of the card */ - u64 iobase_end; /* End of io base of the card */ - - u32 bd_uart_offset; /* Space between each UART */ - - struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ - char *flipbuf; /* Our flip buffer, alloced if board is found */ - - u32 bd_dividend; /* Board/UARTs specific dividend */ - - struct board_ops *bd_ops; - - struct list_head jsm_board_entry; -}; - -/************************************************************************ - * Device flag definitions for ch_flags. - ************************************************************************/ -#define CH_PRON 0x0001 /* Printer on string */ -#define CH_STOP 0x0002 /* Output is stopped */ -#define CH_STOPI 0x0004 /* Input is stopped */ -#define CH_CD 0x0008 /* Carrier is present */ -#define CH_FCAR 0x0010 /* Carrier forced on */ -#define CH_HANGUP 0x0020 /* Hangup received */ - -#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ -#define CH_OPENING 0x0080 /* Port in fragile open state */ -#define CH_CLOSING 0x0100 /* Port in fragile close state */ -#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ -#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ -#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ -#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ -#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ -#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ -#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ - -/* Our Read/Error/Write queue sizes */ -#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ -#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ -#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ -#define RQUEUESIZE (RQUEUEMASK + 1) -#define EQUEUESIZE RQUEUESIZE -#define WQUEUESIZE (WQUEUEMASK + 1) - - -/************************************************************************ - * Channel information structure. - ************************************************************************/ -struct jsm_channel { - struct uart_port uart_port; - struct jsm_board *ch_bd; /* Board structure pointer */ - - spinlock_t ch_lock; /* provide for serialization */ - wait_queue_head_t ch_flags_wait; - - u32 ch_portnum; /* Port number, 0 offset. */ - u32 ch_open_count; /* open count */ - u32 ch_flags; /* Channel flags */ - - u64 ch_close_delay; /* How long we should drop RTS/DTR for */ - - tcflag_t ch_c_iflag; /* channel iflags */ - tcflag_t ch_c_cflag; /* channel cflags */ - tcflag_t ch_c_oflag; /* channel oflags */ - tcflag_t ch_c_lflag; /* channel lflags */ - u8 ch_stopc; /* Stop character */ - u8 ch_startc; /* Start character */ - - u8 ch_mostat; /* FEP output modem status */ - u8 ch_mistat; /* FEP input modem status */ - - struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ - u8 ch_cached_lsr; /* Cached value of the LSR register */ - - u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ - u16 ch_r_head; /* Head location of the read queue */ - u16 ch_r_tail; /* Tail location of the read queue */ - - u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ - u16 ch_e_head; /* Head location of the error queue */ - u16 ch_e_tail; /* Tail location of the error queue */ - - u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ - u16 ch_w_head; /* Head location of the write queue */ - u16 ch_w_tail; /* Tail location of the write queue */ - - u64 ch_rxcount; /* total of data received so far */ - u64 ch_txcount; /* total of data transmitted so far */ - - u8 ch_r_tlevel; /* Receive Trigger level */ - u8 ch_t_tlevel; /* Transmit Trigger level */ - - u8 ch_r_watermark; /* Receive Watermark */ - - - u32 ch_stops_sent; /* How many times I have sent a stop character - * to try to stop the other guy sending. - */ - u64 ch_err_parity; /* Count of parity errors on channel */ - u64 ch_err_frame; /* Count of framing errors on channel */ - u64 ch_err_break; /* Count of breaks on channel */ - u64 ch_err_overrun; /* Count of overruns on channel */ - - u64 ch_xon_sends; /* Count of xons transmitted */ - u64 ch_xoff_sends; /* Count of xoffs transmitted */ -}; - - -/************************************************************************ - * Per channel/port NEO UART structure * - ************************************************************************ - * Base Structure Entries Usage Meanings to Host * - * * - * W = read write R = read only * - * U = Unused. * - ************************************************************************/ - -struct neo_uart_struct { - u8 txrx; /* WR RHR/THR - Holding Reg */ - u8 ier; /* WR IER - Interrupt Enable Reg */ - u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ - u8 lcr; /* WR LCR - Line Control Reg */ - u8 mcr; /* WR MCR - Modem Control Reg */ - u8 lsr; /* WR LSR - Line Status Reg */ - u8 msr; /* WR MSR - Modem Status Reg */ - u8 spr; /* WR SPR - Scratch Pad Reg */ - u8 fctr; /* WR FCTR - Feature Control Reg */ - u8 efr; /* WR EFR - Enhanced Function Reg */ - u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ - u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ - u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ - u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ - u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ - u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ - - u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ - u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ - u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ - u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ -}; - -/* Where to read the extended interrupt register (32bits instead of 8bits) */ -#define UART_17158_POLL_ADDR_OFFSET 0x80 - -/* - * These are the redefinitions for the FCTR on the XR17C158, since - * Exar made them different than their earlier design. (XR16C854) - */ - -/* These are only applicable when table D is selected */ -#define UART_17158_FCTR_RTS_NODELAY 0x00 -#define UART_17158_FCTR_RTS_4DELAY 0x01 -#define UART_17158_FCTR_RTS_6DELAY 0x02 -#define UART_17158_FCTR_RTS_8DELAY 0x03 -#define UART_17158_FCTR_RTS_12DELAY 0x12 -#define UART_17158_FCTR_RTS_16DELAY 0x05 -#define UART_17158_FCTR_RTS_20DELAY 0x13 -#define UART_17158_FCTR_RTS_24DELAY 0x06 -#define UART_17158_FCTR_RTS_28DELAY 0x14 -#define UART_17158_FCTR_RTS_32DELAY 0x07 -#define UART_17158_FCTR_RTS_36DELAY 0x16 -#define UART_17158_FCTR_RTS_40DELAY 0x08 -#define UART_17158_FCTR_RTS_44DELAY 0x09 -#define UART_17158_FCTR_RTS_48DELAY 0x10 -#define UART_17158_FCTR_RTS_52DELAY 0x11 - -#define UART_17158_FCTR_RTS_IRDA 0x10 -#define UART_17158_FCTR_RS485 0x20 -#define UART_17158_FCTR_TRGA 0x00 -#define UART_17158_FCTR_TRGB 0x40 -#define UART_17158_FCTR_TRGC 0x80 -#define UART_17158_FCTR_TRGD 0xC0 - -/* 17158 trigger table selects.. */ -#define UART_17158_FCTR_BIT6 0x40 -#define UART_17158_FCTR_BIT7 0x80 - -/* 17158 TX/RX memmapped buffer offsets */ -#define UART_17158_RX_FIFOSIZE 64 -#define UART_17158_TX_FIFOSIZE 64 - -/* 17158 Extended IIR's */ -#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ -#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ -#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ -#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ - -/* - * These are the extended interrupts that get sent - * back to us from the UART's 32bit interrupt register - */ -#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ -#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ -#define UART_17158_TXRDY 0x3 /* TX Ready */ -#define UART_17158_MSR 0x4 /* Modem State Change */ -#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ -#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ - -/* - * These are the EXTENDED definitions for the 17C158's Interrupt - * Enable Register. - */ -#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ -#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ -#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ -#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ -#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ - -#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ -#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ - -#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ -#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ -#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ -#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ - -#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" -#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" -#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" -#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" -#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" - -/* - * Our Global Variables. - */ -extern struct uart_driver jsm_uart_driver; -extern struct board_ops jsm_neo_ops; -extern int jsm_debug; - -/************************************************************************* - * - * Prototypes for non-static functions used in more than one module - * - *************************************************************************/ -int jsm_tty_write(struct uart_port *port); -int jsm_tty_init(struct jsm_board *); -int jsm_uart_port_init(struct jsm_board *); -int jsm_remove_uart_port(struct jsm_board *); -void jsm_input(struct jsm_channel *ch); -void jsm_check_queue_flow_control(struct jsm_channel *ch); - -#endif diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c deleted file mode 100644 index 18f5484..0000000 --- a/drivers/serial/jsm/jsm_driver.c +++ /dev/null @@ -1,297 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - * - ***********************************************************************/ -#include -#include -#include - -#include "jsm.h" - -MODULE_AUTHOR("Digi International, http://www.digi.com"); -MODULE_DESCRIPTION("Driver for the Digi International " - "Neo PCI based product line"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("jsm"); - -#define JSM_DRIVER_NAME "jsm" -#define NR_PORTS 32 -#define JSM_MINOR_START 0 - -struct uart_driver jsm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = JSM_DRIVER_NAME, - .dev_name = "ttyn", - .major = 0, - .minor = JSM_MINOR_START, - .nr = NR_PORTS, -}; - -static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state); -static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); -static void jsm_io_resume(struct pci_dev *pdev); - -static struct pci_error_handlers jsm_err_handler = { - .error_detected = jsm_io_error_detected, - .slot_reset = jsm_io_slot_reset, - .resume = jsm_io_resume, -}; - -int jsm_debug; -module_param(jsm_debug, int, 0); -MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); - -static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int rc = 0; - struct jsm_board *brd; - static int adapter_count = 0; - - rc = pci_enable_device(pdev); - if (rc) { - dev_err(&pdev->dev, "Device enable FAILED\n"); - goto out; - } - - rc = pci_request_regions(pdev, "jsm"); - if (rc) { - dev_err(&pdev->dev, "pci_request_region FAILED\n"); - goto out_disable_device; - } - - brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); - if (!brd) { - dev_err(&pdev->dev, - "memory allocation for board structure failed\n"); - rc = -ENOMEM; - goto out_release_regions; - } - - /* store the info for the board we've found */ - brd->boardnum = adapter_count++; - brd->pci_dev = pdev; - if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) - brd->maxports = 4; - else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) - brd->maxports = 8; - else - brd->maxports = 2; - - spin_lock_init(&brd->bd_intr_lock); - - /* store which revision we have */ - brd->rev = pdev->revision; - - brd->irq = pdev->irq; - - jsm_printk(INIT, INFO, &brd->pci_dev, - "jsm_found_board - NEO adapter\n"); - - /* get the PCI Base Address Registers */ - brd->membase = pci_resource_start(pdev, 0); - brd->membase_end = pci_resource_end(pdev, 0); - - if (brd->membase & 1) - brd->membase &= ~3; - else - brd->membase &= ~15; - - /* Assign the board_ops struct */ - brd->bd_ops = &jsm_neo_ops; - - brd->bd_uart_offset = 0x200; - brd->bd_dividend = 921600; - - brd->re_map_membase = ioremap(brd->membase, 0x1000); - if (!brd->re_map_membase) { - dev_err(&pdev->dev, - "card has no PCI Memory resources, " - "failing board.\n"); - rc = -ENOMEM; - goto out_kfree_brd; - } - - rc = request_irq(brd->irq, brd->bd_ops->intr, - IRQF_SHARED, "JSM", brd); - if (rc) { - printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); - goto out_iounmap; - } - - rc = jsm_tty_init(brd); - if (rc < 0) { - dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); - rc = -ENXIO; - goto out_free_irq; - } - - rc = jsm_uart_port_init(brd); - if (rc < 0) { - /* XXX: leaking all resources from jsm_tty_init here! */ - dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); - rc = -ENXIO; - goto out_free_irq; - } - - /* Log the information about the board */ - dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n", - adapter_count, brd->rev, brd->irq); - - /* - * allocate flip buffer for board. - * - * Okay to malloc with GFP_KERNEL, we are not at interrupt - * context, and there are no locks held. - */ - brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL); - if (!brd->flipbuf) { - /* XXX: leaking all resources from jsm_tty_init and - jsm_uart_port_init here! */ - dev_err(&pdev->dev, "memory allocation for flipbuf failed\n"); - rc = -ENOMEM; - goto out_free_uart; - } - - pci_set_drvdata(pdev, brd); - pci_save_state(pdev); - - return 0; - out_free_uart: - jsm_remove_uart_port(brd); - out_free_irq: - jsm_remove_uart_port(brd); - free_irq(brd->irq, brd); - out_iounmap: - iounmap(brd->re_map_membase); - out_kfree_brd: - kfree(brd); - out_release_regions: - pci_release_regions(pdev); - out_disable_device: - pci_disable_device(pdev); - out: - return rc; -} - -static void __devexit jsm_remove_one(struct pci_dev *pdev) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - int i = 0; - - jsm_remove_uart_port(brd); - - free_irq(brd->irq, brd); - iounmap(brd->re_map_membase); - - /* Free all allocated channels structs */ - for (i = 0; i < brd->maxports; i++) { - if (brd->channels[i]) { - kfree(brd->channels[i]->ch_rqueue); - kfree(brd->channels[i]->ch_equeue); - kfree(brd->channels[i]->ch_wqueue); - kfree(brd->channels[i]); - } - } - - pci_release_regions(pdev); - pci_disable_device(pdev); - kfree(brd->flipbuf); - kfree(brd); -} - -static struct pci_device_id jsm_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); - -static struct pci_driver jsm_driver = { - .name = "jsm", - .id_table = jsm_pci_tbl, - .probe = jsm_probe_one, - .remove = __devexit_p(jsm_remove_one), - .err_handler = &jsm_err_handler, -}; - -static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - - jsm_remove_uart_port(brd); - - return PCI_ERS_RESULT_NEED_RESET; -} - -static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) -{ - int rc; - - rc = pci_enable_device(pdev); - - if (rc) - return PCI_ERS_RESULT_DISCONNECT; - - pci_set_master(pdev); - - return PCI_ERS_RESULT_RECOVERED; -} - -static void jsm_io_resume(struct pci_dev *pdev) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - - pci_restore_state(pdev); - - jsm_uart_port_init(brd); -} - -static int __init jsm_init_module(void) -{ - int rc; - - rc = uart_register_driver(&jsm_uart_driver); - if (!rc) { - rc = pci_register_driver(&jsm_driver); - if (rc) - uart_unregister_driver(&jsm_uart_driver); - } - return rc; -} - -static void __exit jsm_exit_module(void) -{ - pci_unregister_driver(&jsm_driver); - uart_unregister_driver(&jsm_uart_driver); -} - -module_init(jsm_init_module); -module_exit(jsm_exit_module); diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c deleted file mode 100644 index 7960d96..0000000 --- a/drivers/serial/jsm/jsm_neo.c +++ /dev/null @@ -1,1412 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - ***********************************************************************/ -#include /* For udelay */ -#include /* For the various UART offsets */ -#include -#include -#include - -#include "jsm.h" /* Driver main header file */ - -static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; - -/* - * This function allows calls to ensure that all outstanding - * PCI writes have been completed, by doing a PCI read against - * a non-destructive, read-only location on the Neo card. - * - * In this case, we are reading the DVID (Read-only Device Identification) - * value of the Neo card. - */ -static inline void neo_pci_posting_flush(struct jsm_board *bd) -{ - readb(bd->re_map_membase + 0x8D); -} - -static void neo_set_cts_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); - - /* Turn on auto CTS flow control */ - ier |= (UART_17158_IER_CTSDSR); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); - - /* Turn off auto Xon flow control */ - efr &= ~(UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); - - /* Feed the UART our trigger levels */ - writeb(8, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 8; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_rts_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); - - /* Turn on auto RTS flow control */ - ier |= (UART_17158_IER_RTSDTR); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); - - /* Turn off auto Xoff flow control */ - ier &= ~(UART_17158_IER_XOFF); - efr &= ~(UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); - ch->ch_r_watermark = 4; - - writeb(56, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 56; - - writeb(ier, &ch->ch_neo_uart->ier); - - /* - * From the Neo UART spec sheet: - * The auto RTS/DTR function must be started by asserting - * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after - * it is enabled. - */ - ch->ch_mostat |= (UART_MCR_RTS); -} - - -static void neo_set_ixon_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); - - /* Turn off auto CTS flow control */ - ier &= ~(UART_17158_IER_CTSDSR); - efr &= ~(UART_17158_EFR_CTSDSR); - - /* Turn on auto Xon flow control */ - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - ch->ch_r_watermark = 4; - - writeb(32, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 32; - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_ixoff_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); - - /* Turn off auto RTS flow control */ - ier &= ~(UART_17158_IER_RTSDTR); - efr &= ~(UART_17158_EFR_RTSDTR); - - /* Turn on auto Xoff flow control */ - ier |= (UART_17158_IER_XOFF); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - writeb(8, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 8; - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_no_input_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); - - /* Turn off auto RTS flow control */ - ier &= ~(UART_17158_IER_RTSDTR); - efr &= ~(UART_17158_EFR_RTSDTR); - - /* Turn off auto Xoff flow control */ - ier &= ~(UART_17158_IER_XOFF); - if (ch->ch_c_iflag & IXON) - efr &= ~(UART_17158_EFR_IXOFF); - else - efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - ch->ch_r_watermark = 0; - - writeb(16, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 16; - - writeb(16, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 16; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_no_output_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); - - /* Turn off auto CTS flow control */ - ier &= ~(UART_17158_IER_CTSDSR); - efr &= ~(UART_17158_EFR_CTSDSR); - - /* Turn off auto Xon flow control */ - if (ch->ch_c_iflag & IXOFF) - efr &= ~(UART_17158_EFR_IXON); - else - efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - ch->ch_r_watermark = 0; - - writeb(16, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 16; - - writeb(16, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 16; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) -{ - - /* if hardware flow control is set, then skip this whole thing */ - if (ch->ch_c_cflag & CRTSCTS) - return; - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); -} - -static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) -{ - int qleft = 0; - u8 linestatus = 0; - u8 error_mask = 0; - int n = 0; - int total = 0; - u16 head; - u16 tail; - - if (!ch) - return; - - /* cache head and tail of queue */ - head = ch->ch_r_head & RQUEUEMASK; - tail = ch->ch_r_tail & RQUEUEMASK; - - /* Get our cached LSR */ - linestatus = ch->ch_cached_lsr; - ch->ch_cached_lsr = 0; - - /* Store how much space we have left in the queue */ - if ((qleft = tail - head - 1) < 0) - qleft += RQUEUEMASK + 1; - - /* - * If the UART is not in FIFO mode, force the FIFO copy to - * NOT be run, by setting total to 0. - * - * On the other hand, if the UART IS in FIFO mode, then ask - * the UART to give us an approximation of data it has RX'ed. - */ - if (!(ch->ch_flags & CH_FIFO_ENABLED)) - total = 0; - else { - total = readb(&ch->ch_neo_uart->rfifo); - - /* - * EXAR chip bug - RX FIFO COUNT - Fudge factor. - * - * This resolves a problem/bug with the Exar chip that sometimes - * returns a bogus value in the rfifo register. - * The count can be any where from 0-3 bytes "off". - * Bizarre, but true. - */ - total -= 3; - } - - /* - * Finally, bound the copy to make sure we don't overflow - * our own queue... - * The byte by byte copy loop below this loop this will - * deal with the queue overflow possibility. - */ - total = min(total, qleft); - - while (total > 0) { - /* - * Grab the linestatus register, we need to check - * to see if there are any errors in the FIFO. - */ - linestatus = readb(&ch->ch_neo_uart->lsr); - - /* - * Break out if there is a FIFO error somewhere. - * This will allow us to go byte by byte down below, - * finding the exact location of the error. - */ - if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) - break; - - /* Make sure we don't go over the end of our queue */ - n = min(((u32) total), (RQUEUESIZE - (u32) head)); - - /* - * Cut down n even further if needed, this is to fix - * a problem with memcpy_fromio() with the Neo on the - * IBM pSeries platform. - * 15 bytes max appears to be the magic number. - */ - n = min((u32) n, (u32) 12); - - /* - * Since we are grabbing the linestatus register, which - * will reset some bits after our read, we need to ensure - * we don't miss our TX FIFO emptys. - */ - if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - - linestatus = 0; - - /* Copy data from uart to the queue */ - memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); - /* - * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed - * that all the data currently in the FIFO is free of - * breaks and parity/frame/orun errors. - */ - memset(ch->ch_equeue + head, 0, n); - - /* Add to and flip head if needed */ - head = (head + n) & RQUEUEMASK; - total -= n; - qleft -= n; - ch->ch_rxcount += n; - } - - /* - * Create a mask to determine whether we should - * insert the character (if any) into our queue. - */ - if (ch->ch_c_iflag & IGNBRK) - error_mask |= UART_LSR_BI; - - /* - * Now cleanup any leftover bytes still in the UART. - * Also deal with any possible queue overflow here as well. - */ - while (1) { - - /* - * Its possible we have a linestatus from the loop above - * this, so we "OR" on any extra bits. - */ - linestatus |= readb(&ch->ch_neo_uart->lsr); - - /* - * If the chip tells us there is no more data pending to - * be read, we can then leave. - * But before we do, cache the linestatus, just in case. - */ - if (!(linestatus & UART_LSR_DR)) { - ch->ch_cached_lsr = linestatus; - break; - } - - /* No need to store this bit */ - linestatus &= ~UART_LSR_DR; - - /* - * Since we are grabbing the linestatus register, which - * will reset some bits after our read, we need to ensure - * we don't miss our TX FIFO emptys. - */ - if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { - linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - } - - /* - * Discard character if we are ignoring the error mask. - */ - if (linestatus & error_mask) { - u8 discard; - linestatus = 0; - memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); - continue; - } - - /* - * If our queue is full, we have no choice but to drop some data. - * The assumption is that HWFLOW or SWFLOW should have stopped - * things way way before we got to this point. - * - * I decided that I wanted to ditch the oldest data first, - * I hope thats okay with everyone? Yes? Good. - */ - while (qleft < 1) { - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Queue full, dropping DATA:%x LSR:%x\n", - ch->ch_rqueue[tail], ch->ch_equeue[tail]); - - ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; - ch->ch_err_overrun++; - qleft++; - } - - memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); - ch->ch_equeue[head] = (u8) linestatus; - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); - - /* Ditch any remaining linestatus value. */ - linestatus = 0; - - /* Add to and flip head if needed */ - head = (head + 1) & RQUEUEMASK; - - qleft--; - ch->ch_rxcount++; - } - - /* - * Write new final heads to channel structure. - */ - ch->ch_r_head = head & RQUEUEMASK; - ch->ch_e_head = head & EQUEUEMASK; - jsm_input(ch); -} - -static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) -{ - u16 head; - u16 tail; - int n; - int s; - int qlen; - u32 len_written = 0; - - if (!ch) - return; - - /* No data to write to the UART */ - if (ch->ch_w_tail == ch->ch_w_head) - return; - - /* If port is "stopped", don't send any data to the UART */ - if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) - return; - /* - * If FIFOs are disabled. Send data directly to txrx register - */ - if (!(ch->ch_flags & CH_FIFO_ENABLED)) { - u8 lsrbits = readb(&ch->ch_neo_uart->lsr); - - ch->ch_cached_lsr |= lsrbits; - if (ch->ch_cached_lsr & UART_LSR_THRE) { - ch->ch_cached_lsr &= ~(UART_LSR_THRE); - - writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); - jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, - "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); - ch->ch_w_tail++; - ch->ch_w_tail &= WQUEUEMASK; - ch->ch_txcount++; - } - return; - } - - /* - * We have to do it this way, because of the EXAR TXFIFO count bug. - */ - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) - return; - - n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; - - /* cache head and tail of queue */ - head = ch->ch_w_head & WQUEUEMASK; - tail = ch->ch_w_tail & WQUEUEMASK; - qlen = (head - tail) & WQUEUEMASK; - - /* Find minimum of the FIFO space, versus queue length */ - n = min(n, qlen); - - while (n > 0) { - - s = ((head >= tail) ? head : WQUEUESIZE) - tail; - s = min(s, n); - - if (s <= 0) - break; - - memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); - /* Add and flip queue if needed */ - tail = (tail + s) & WQUEUEMASK; - n -= s; - ch->ch_txcount += s; - len_written += s; - } - - /* Update the final tail */ - ch->ch_w_tail = tail & WQUEUEMASK; - - if (len_written >= ch->ch_t_tlevel) - ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - - if (!jsm_tty_write(&ch->uart_port)) - uart_write_wakeup(&ch->uart_port); -} - -static void neo_parse_modem(struct jsm_channel *ch, u8 signals) -{ - u8 msignals = signals; - - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); - - /* Scrub off lower bits. They signify delta's, which I don't care about */ - /* Keep DDCD and DDSR though */ - msignals &= 0xf8; - - if (msignals & UART_MSR_DDCD) - uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); - if (msignals & UART_MSR_DDSR) - uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); - if (msignals & UART_MSR_DCD) - ch->ch_mistat |= UART_MSR_DCD; - else - ch->ch_mistat &= ~UART_MSR_DCD; - - if (msignals & UART_MSR_DSR) - ch->ch_mistat |= UART_MSR_DSR; - else - ch->ch_mistat &= ~UART_MSR_DSR; - - if (msignals & UART_MSR_RI) - ch->ch_mistat |= UART_MSR_RI; - else - ch->ch_mistat &= ~UART_MSR_RI; - - if (msignals & UART_MSR_CTS) - ch->ch_mistat |= UART_MSR_CTS; - else - ch->ch_mistat &= ~UART_MSR_CTS; - - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", - ch->ch_portnum, - !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); -} - -/* Make the UART raise any of the output signals we want up */ -static void neo_assert_modem_signals(struct jsm_channel *ch) -{ - if (!ch) - return; - - writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -/* - * Flush the WRITE FIFO on the Neo. - * - * NOTE: Channel lock MUST be held before calling this function! - */ -static void neo_flush_uart_write(struct jsm_channel *ch) -{ - u8 tmp = 0; - int i = 0; - - if (!ch) - return; - - writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); - - for (i = 0; i < 10; i++) { - - /* Check to see if the UART feels it completely flushed the FIFO. */ - tmp = readb(&ch->ch_neo_uart->isr_fcr); - if (tmp & 4) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing TX UART... i: %d\n", i); - udelay(10); - } - else - break; - } - - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); -} - - -/* - * Flush the READ FIFO on the Neo. - * - * NOTE: Channel lock MUST be held before calling this function! - */ -static void neo_flush_uart_read(struct jsm_channel *ch) -{ - u8 tmp = 0; - int i = 0; - - if (!ch) - return; - - writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); - - for (i = 0; i < 10; i++) { - - /* Check to see if the UART feels it completely flushed the FIFO. */ - tmp = readb(&ch->ch_neo_uart->isr_fcr); - if (tmp & 2) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing RX UART... i: %d\n", i); - udelay(10); - } - else - break; - } -} - -/* - * No locks are assumed to be held when calling this function. - */ -static void neo_clear_break(struct jsm_channel *ch, int force) -{ - unsigned long lock_flags; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* Turn break off, and unset some variables */ - if (ch->ch_flags & CH_BREAK_SENDING) { - u8 temp = readb(&ch->ch_neo_uart->lcr); - writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); - - ch->ch_flags &= ~(CH_BREAK_SENDING); - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); -} - -/* - * Parse the ISR register. - */ -static inline void neo_parse_isr(struct jsm_board *brd, u32 port) -{ - struct jsm_channel *ch; - u8 isr; - u8 cause; - unsigned long lock_flags; - - if (!brd) - return; - - if (port > brd->maxports) - return; - - ch = brd->channels[port]; - if (!ch) - return; - - /* Here we try to figure out what caused the interrupt to happen */ - while (1) { - - isr = readb(&ch->ch_neo_uart->isr_fcr); - - /* Bail if no pending interrupt */ - if (isr & UART_IIR_NO_INT) - break; - - /* - * Yank off the upper 2 bits, which just show that the FIFO's are enabled. - */ - isr &= ~(UART_17158_IIR_FIFO_ENABLED); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d isr: %x\n", __FILE__, __LINE__, isr); - - if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { - /* Read data from uart -> queue */ - neo_copy_data_from_uart_to_queue(ch); - - /* Call our tty layer to enforce queue flow control if needed. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - if (isr & UART_IIR_THRI) { - /* Transfer data (if any) from Write Queue -> UART. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - neo_copy_data_from_queue_to_uart(ch); - } - - if (isr & UART_17158_IIR_XONXOFF) { - cause = readb(&ch->ch_neo_uart->xoffchar1); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); - - /* - * Since the UART detected either an XON or - * XOFF match, we need to figure out which - * one it was, so we can suspend or resume data flow. - */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - if (cause == UART_17158_XON_DETECT) { - /* Is output stopped right now, if so, resume it */ - if (brd->channels[port]->ch_flags & CH_STOP) { - ch->ch_flags &= ~(CH_STOP); - } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. XON detected in incoming data\n", port); - } - else if (cause == UART_17158_XOFF_DETECT) { - if (!(brd->channels[port]->ch_flags & CH_STOP)) { - ch->ch_flags |= CH_STOP; - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Setting CH_STOP\n"); - } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port: %d. XOFF detected in incoming data\n", port); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { - /* - * If we get here, this means the hardware is doing auto flow control. - * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. - */ - cause = readb(&ch->ch_neo_uart->mcr); - - /* Which pin is doing auto flow? RTS or DTR? */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - if ((cause & 0x4) == 0) { - if (cause & UART_MCR_RTS) - ch->ch_mostat |= UART_MCR_RTS; - else - ch->ch_mostat &= ~(UART_MCR_RTS); - } else { - if (cause & UART_MCR_DTR) - ch->ch_mostat |= UART_MCR_DTR; - else - ch->ch_mostat &= ~(UART_MCR_DTR); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - /* Parse any modem signal changes */ - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "MOD_STAT: sending to parse_modem_sigs\n"); - neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); - } -} - -static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) -{ - struct jsm_channel *ch; - int linestatus; - unsigned long lock_flags; - - if (!brd) - return; - - if (port > brd->maxports) - return; - - ch = brd->channels[port]; - if (!ch) - return; - - linestatus = readb(&ch->ch_neo_uart->lsr); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); - - ch->ch_cached_lsr |= linestatus; - - if (ch->ch_cached_lsr & UART_LSR_DR) { - /* Read data from uart -> queue */ - neo_copy_data_from_uart_to_queue(ch); - spin_lock_irqsave(&ch->ch_lock, lock_flags); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - /* - * This is a special flag. It indicates that at least 1 - * RX error (parity, framing, or break) has happened. - * Mark this in our struct, which will tell me that I have - *to do the special RX+LSR read for this FIFO load. - */ - if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d Got an RX error, need to parse LSR\n", - __FILE__, __LINE__, port); - - /* - * The next 3 tests should *NOT* happen, as the above test - * should encapsulate all 3... At least, thats what Exar says. - */ - - if (linestatus & UART_LSR_PE) { - ch->ch_err_parity++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_FE) { - ch->ch_err_frame++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_BI) { - ch->ch_err_break++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_OE) { - /* - * Rx Oruns. Exar says that an orun will NOT corrupt - * the FIFO. It will just replace the holding register - * with this new data byte. So basically just ignore this. - * Probably we should eventually have an orun stat in our driver... - */ - ch->ch_err_overrun++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_THRE) { - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Transfer data (if any) from Write Queue -> UART. */ - neo_copy_data_from_queue_to_uart(ch); - } - else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Transfer data (if any) from Write Queue -> UART. */ - neo_copy_data_from_queue_to_uart(ch); - } -} - -/* - * neo_param() - * Send any/all changes to the line to the UART. - */ -static void neo_param(struct jsm_channel *ch) -{ - u8 lcr = 0; - u8 uart_lcr, ier; - u32 baud; - int quot; - struct jsm_board *bd; - - bd = ch->ch_bd; - if (!bd) - return; - - /* - * If baud rate is zero, flush queues, and set mval to drop DTR. - */ - if ((ch->ch_c_cflag & (CBAUD)) == 0) { - ch->ch_r_head = ch->ch_r_tail = 0; - ch->ch_e_head = ch->ch_e_tail = 0; - ch->ch_w_head = ch->ch_w_tail = 0; - - neo_flush_uart_write(ch); - neo_flush_uart_read(ch); - - ch->ch_flags |= (CH_BAUD0); - ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); - neo_assert_modem_signals(ch); - return; - - } else { - int i; - unsigned int cflag; - static struct { - unsigned int rate; - unsigned int cflag; - } baud_rates[] = { - { 921600, B921600 }, - { 460800, B460800 }, - { 230400, B230400 }, - { 115200, B115200 }, - { 57600, B57600 }, - { 38400, B38400 }, - { 19200, B19200 }, - { 9600, B9600 }, - { 4800, B4800 }, - { 2400, B2400 }, - { 1200, B1200 }, - { 600, B600 }, - { 300, B300 }, - { 200, B200 }, - { 150, B150 }, - { 134, B134 }, - { 110, B110 }, - { 75, B75 }, - { 50, B50 }, - }; - - cflag = C_BAUD(ch->uart_port.state->port.tty); - baud = 9600; - for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { - if (baud_rates[i].cflag == cflag) { - baud = baud_rates[i].rate; - break; - } - } - - if (ch->ch_flags & CH_BAUD0) - ch->ch_flags &= ~(CH_BAUD0); - } - - if (ch->ch_c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - - if (!(ch->ch_c_cflag & PARODD)) - lcr |= UART_LCR_EPAR; - - /* - * Not all platforms support mark/space parity, - * so this will hide behind an ifdef. - */ -#ifdef CMSPAR - if (ch->ch_c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; -#endif - - if (ch->ch_c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - - switch (ch->ch_c_cflag & CSIZE) { - case CS5: - lcr |= UART_LCR_WLEN5; - break; - case CS6: - lcr |= UART_LCR_WLEN6; - break; - case CS7: - lcr |= UART_LCR_WLEN7; - break; - case CS8: - default: - lcr |= UART_LCR_WLEN8; - break; - } - - ier = readb(&ch->ch_neo_uart->ier); - uart_lcr = readb(&ch->ch_neo_uart->lcr); - - if (baud == 0) - baud = 9600; - - quot = ch->ch_bd->bd_dividend / baud; - - if (quot != 0) { - writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); - writeb((quot & 0xff), &ch->ch_neo_uart->txrx); - writeb((quot >> 8), &ch->ch_neo_uart->ier); - writeb(lcr, &ch->ch_neo_uart->lcr); - } - - if (uart_lcr != lcr) - writeb(lcr, &ch->ch_neo_uart->lcr); - - if (ch->ch_c_cflag & CREAD) - ier |= (UART_IER_RDI | UART_IER_RLSI); - - ier |= (UART_IER_THRI | UART_IER_MSI); - - writeb(ier, &ch->ch_neo_uart->ier); - - /* Set new start/stop chars */ - neo_set_new_start_stop_chars(ch); - - if (ch->ch_c_cflag & CRTSCTS) - neo_set_cts_flow_control(ch); - else if (ch->ch_c_iflag & IXON) { - /* If start/stop is set to disable, then we should disable flow control */ - if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) - neo_set_no_output_flow_control(ch); - else - neo_set_ixon_flow_control(ch); - } - else - neo_set_no_output_flow_control(ch); - - if (ch->ch_c_cflag & CRTSCTS) - neo_set_rts_flow_control(ch); - else if (ch->ch_c_iflag & IXOFF) { - /* If start/stop is set to disable, then we should disable flow control */ - if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) - neo_set_no_input_flow_control(ch); - else - neo_set_ixoff_flow_control(ch); - } - else - neo_set_no_input_flow_control(ch); - /* - * Adjust the RX FIFO Trigger level if baud is less than 9600. - * Not exactly elegant, but this is needed because of the Exar chip's - * delay on firing off the RX FIFO interrupt on slower baud rates. - */ - if (baud < 9600) { - writeb(1, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 1; - } - - neo_assert_modem_signals(ch); - - /* Get current status of the modem signals now */ - neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); - return; -} - -/* - * jsm_neo_intr() - * - * Neo specific interrupt handler. - */ -static irqreturn_t neo_intr(int irq, void *voidbrd) -{ - struct jsm_board *brd = voidbrd; - struct jsm_channel *ch; - int port = 0; - int type = 0; - int current_port; - u32 tmp; - u32 uart_poll; - unsigned long lock_flags; - unsigned long lock_flags2; - int outofloop_count = 0; - - /* Lock out the slow poller from running on this board. */ - spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); - - /* - * Read in "extended" IRQ information from the 32bit Neo register. - * Bits 0-7: What port triggered the interrupt. - * Bits 8-31: Each 3bits indicate what type of interrupt occurred. - */ - uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); - - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); - - if (!uart_poll) { - jsm_printk(INTR, INFO, &brd->pci_dev, - "Kernel interrupted to me, but no pending interrupts...\n"); - spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); - return IRQ_NONE; - } - - /* At this point, we have at least SOMETHING to service, dig further... */ - - current_port = 0; - - /* Loop on each port */ - while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ - - tmp = uart_poll; - outofloop_count++; - - /* Check current port to see if it has interrupt pending */ - if ((tmp & jsm_offset_table[current_port]) != 0) { - port = current_port; - type = tmp >> (8 + (port * 3)); - type &= 0x7; - } else { - current_port++; - continue; - } - - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); - - /* Remove this port + type from uart_poll */ - uart_poll &= ~(jsm_offset_table[port]); - - if (!type) { - /* If no type, just ignore it, and move onto next port */ - jsm_printk(INTR, ERR, &brd->pci_dev, - "Interrupt with no type! port: %d\n", port); - continue; - } - - /* Switch on type of interrupt we have */ - switch (type) { - - case UART_17158_RXRDY_TIMEOUT: - /* - * RXRDY Time-out is cleared by reading data in the - * RX FIFO until it falls below the trigger level. - */ - - /* Verify the port is in range. */ - if (port > brd->nasync) - continue; - - ch = brd->channels[port]; - neo_copy_data_from_uart_to_queue(ch); - - /* Call our tty layer to enforce queue flow control if needed. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - - continue; - - case UART_17158_RX_LINE_STATUS: - /* - * RXRDY and RX LINE Status (logic OR of LSR[4:1]) - */ - neo_parse_lsr(brd, port); - continue; - - case UART_17158_TXRDY: - /* - * TXRDY interrupt clears after reading ISR register for the UART channel. - */ - - /* - * Yes, this is odd... - * Why would I check EVERY possibility of type of - * interrupt, when we know its TXRDY??? - * Becuz for some reason, even tho we got triggered for TXRDY, - * it seems to be occassionally wrong. Instead of TX, which - * it should be, I was getting things like RXDY too. Weird. - */ - neo_parse_isr(brd, port); - continue; - - case UART_17158_MSR: - /* - * MSR or flow control was seen. - */ - neo_parse_isr(brd, port); - continue; - - default: - /* - * The UART triggered us with a bogus interrupt type. - * It appears the Exar chip, when REALLY bogged down, will throw - * these once and awhile. - * Its harmless, just ignore it and move on. - */ - jsm_printk(INTR, ERR, &brd->pci_dev, - "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); - continue; - } - } - - spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); - - jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); - return IRQ_HANDLED; -} - -/* - * Neo specific way of turning off the receiver. - * Used as a way to enforce queue flow control when in - * hardware flow control mode. - */ -static void neo_disable_receiver(struct jsm_channel *ch) -{ - u8 tmp = readb(&ch->ch_neo_uart->ier); - tmp &= ~(UART_IER_RDI); - writeb(tmp, &ch->ch_neo_uart->ier); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - - -/* - * Neo specific way of turning on the receiver. - * Used as a way to un-enforce queue flow control when in - * hardware flow control mode. - */ -static void neo_enable_receiver(struct jsm_channel *ch) -{ - u8 tmp = readb(&ch->ch_neo_uart->ier); - tmp |= (UART_IER_RDI); - writeb(tmp, &ch->ch_neo_uart->ier); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -static void neo_send_start_character(struct jsm_channel *ch) -{ - if (!ch) - return; - - if (ch->ch_startc != __DISABLED_CHAR) { - ch->ch_xon_sends++; - writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -static void neo_send_stop_character(struct jsm_channel *ch) -{ - if (!ch) - return; - - if (ch->ch_stopc != __DISABLED_CHAR) { - ch->ch_xoff_sends++; - writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -/* - * neo_uart_init - */ -static void neo_uart_init(struct jsm_channel *ch) -{ - writeb(0, &ch->ch_neo_uart->ier); - writeb(0, &ch->ch_neo_uart->efr); - writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); - - /* Clear out UART and FIFO */ - readb(&ch->ch_neo_uart->txrx); - writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); - readb(&ch->ch_neo_uart->lsr); - readb(&ch->ch_neo_uart->msr); - - ch->ch_flags |= CH_FIFO_ENABLED; - - /* Assert any signals we want up */ - writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); -} - -/* - * Make the UART completely turn off. - */ -static void neo_uart_off(struct jsm_channel *ch) -{ - /* Turn off UART enhanced bits */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Stop all interrupts from occurring. */ - writeb(0, &ch->ch_neo_uart->ier); -} - -static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) -{ - u8 left = 0; - u8 lsr = readb(&ch->ch_neo_uart->lsr); - - /* We must cache the LSR as some of the bits get reset once read... */ - ch->ch_cached_lsr |= lsr; - - /* Determine whether the Transmitter is empty or not */ - if (!(lsr & UART_LSR_TEMT)) - left = 1; - else { - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - left = 0; - } - - return left; -} - -/* Channel lock MUST be held by the calling function! */ -static void neo_send_break(struct jsm_channel *ch) -{ - /* - * Set the time we should stop sending the break. - * If we are already sending a break, toss away the existing - * time to stop, and use this new value instead. - */ - - /* Tell the UART to start sending the break */ - if (!(ch->ch_flags & CH_BREAK_SENDING)) { - u8 temp = readb(&ch->ch_neo_uart->lcr); - writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); - ch->ch_flags |= (CH_BREAK_SENDING); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -/* - * neo_send_immediate_char. - * - * Sends a specific character as soon as possible to the UART, - * jumping over any bytes that might be in the write queue. - * - * The channel lock MUST be held by the calling function. - */ -static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) -{ - if (!ch) - return; - - writeb(c, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -struct board_ops jsm_neo_ops = { - .intr = neo_intr, - .uart_init = neo_uart_init, - .uart_off = neo_uart_off, - .param = neo_param, - .assert_modem_signals = neo_assert_modem_signals, - .flush_uart_write = neo_flush_uart_write, - .flush_uart_read = neo_flush_uart_read, - .disable_receiver = neo_disable_receiver, - .enable_receiver = neo_enable_receiver, - .send_break = neo_send_break, - .clear_break = neo_clear_break, - .send_start_character = neo_send_start_character, - .send_stop_character = neo_send_stop_character, - .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, - .get_uart_bytes_left = neo_get_uart_bytes_left, - .send_immediate_char = neo_send_immediate_char -}; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c deleted file mode 100644 index 7a4a914..0000000 --- a/drivers/serial/jsm/jsm_tty.c +++ /dev/null @@ -1,910 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Ananda Venkatarman - * Modifications: - * 01/19/06: changed jsm_input routine to use the dynamically allocated - * tty_buffer changes. Contributors: Scott Kilau and Ananda V. - ***********************************************************************/ -#include -#include -#include -#include /* For udelay */ -#include -#include - -#include "jsm.h" - -static DECLARE_BITMAP(linemap, MAXLINES); - -static void jsm_carrier(struct jsm_channel *ch); - -static inline int jsm_get_mstat(struct jsm_channel *ch) -{ - unsigned char mstat; - unsigned result; - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); - - mstat = (ch->ch_mostat | ch->ch_mistat); - - result = 0; - - if (mstat & UART_MCR_DTR) - result |= TIOCM_DTR; - if (mstat & UART_MCR_RTS) - result |= TIOCM_RTS; - if (mstat & UART_MSR_CTS) - result |= TIOCM_CTS; - if (mstat & UART_MSR_DSR) - result |= TIOCM_DSR; - if (mstat & UART_MSR_RI) - result |= TIOCM_RI; - if (mstat & UART_MSR_DCD) - result |= TIOCM_CD; - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); - return result; -} - -static unsigned int jsm_tty_tx_empty(struct uart_port *port) -{ - return TIOCSER_TEMT; -} - -/* - * Return modem signals to ld. - */ -static unsigned int jsm_tty_get_mctrl(struct uart_port *port) -{ - int result; - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - result = jsm_get_mstat(channel); - - if (result < 0) - return -ENXIO; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); - - return result; -} - -/* - * jsm_set_modem_info() - * - * Set modem signals, called by ld. - */ -static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - if (mctrl & TIOCM_RTS) - channel->ch_mostat |= UART_MCR_RTS; - else - channel->ch_mostat &= ~UART_MCR_RTS; - - if (mctrl & TIOCM_DTR) - channel->ch_mostat |= UART_MCR_DTR; - else - channel->ch_mostat &= ~UART_MCR_DTR; - - channel->ch_bd->bd_ops->assert_modem_signals(channel); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); - udelay(10); -} - -static void jsm_tty_start_tx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - channel->ch_flags &= ~(CH_STOP); - jsm_tty_write(port); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_stop_tx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - channel->ch_flags |= (CH_STOP); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_send_xchar(struct uart_port *port, char ch) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - struct ktermios *termios; - - spin_lock_irqsave(&port->lock, lock_flags); - termios = port->state->port.tty->termios; - if (ch == termios->c_cc[VSTART]) - channel->ch_bd->bd_ops->send_start_character(channel); - - if (ch == termios->c_cc[VSTOP]) - channel->ch_bd->bd_ops->send_stop_character(channel); - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static void jsm_tty_stop_rx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - channel->ch_bd->bd_ops->disable_receiver(channel); -} - -static void jsm_tty_enable_ms(struct uart_port *port) -{ - /* Nothing needed */ -} - -static void jsm_tty_break(struct uart_port *port, int break_state) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - - spin_lock_irqsave(&port->lock, lock_flags); - if (break_state == -1) - channel->ch_bd->bd_ops->send_break(channel); - else - channel->ch_bd->bd_ops->clear_break(channel, 0); - - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static int jsm_tty_open(struct uart_port *port) -{ - struct jsm_board *brd; - struct jsm_channel *channel = (struct jsm_channel *)port; - struct ktermios *termios; - - /* Get board pointer from our array of majors we have allocated */ - brd = channel->ch_bd; - - /* - * Allocate channel buffers for read/write/error. - * Set flag, so we don't get trounced on. - */ - channel->ch_flags |= (CH_OPENING); - - /* Drop locks, as malloc with GFP_KERNEL can sleep */ - - if (!channel->ch_rqueue) { - channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); - if (!channel->ch_rqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate read queue buf"); - return -ENOMEM; - } - } - if (!channel->ch_equeue) { - channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); - if (!channel->ch_equeue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate error queue buf"); - return -ENOMEM; - } - } - if (!channel->ch_wqueue) { - channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); - if (!channel->ch_wqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate write queue buf"); - return -ENOMEM; - } - } - - channel->ch_flags &= ~(CH_OPENING); - /* - * Initialize if neither terminal is open. - */ - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, - "jsm_open: initializing channel in open...\n"); - - /* - * Flush input queues. - */ - channel->ch_r_head = channel->ch_r_tail = 0; - channel->ch_e_head = channel->ch_e_tail = 0; - channel->ch_w_head = channel->ch_w_tail = 0; - - brd->bd_ops->flush_uart_write(channel); - brd->bd_ops->flush_uart_read(channel); - - channel->ch_flags = 0; - channel->ch_cached_lsr = 0; - channel->ch_stops_sent = 0; - - termios = port->state->port.tty->termios; - channel->ch_c_cflag = termios->c_cflag; - channel->ch_c_iflag = termios->c_iflag; - channel->ch_c_oflag = termios->c_oflag; - channel->ch_c_lflag = termios->c_lflag; - channel->ch_startc = termios->c_cc[VSTART]; - channel->ch_stopc = termios->c_cc[VSTOP]; - - /* Tell UART to init itself */ - brd->bd_ops->uart_init(channel); - - /* - * Run param in case we changed anything - */ - brd->bd_ops->param(channel); - - jsm_carrier(channel); - - channel->ch_open_count++; - - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); - return 0; -} - -static void jsm_tty_close(struct uart_port *port) -{ - struct jsm_board *bd; - struct ktermios *ts; - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); - - bd = channel->ch_bd; - ts = port->state->port.tty->termios; - - channel->ch_flags &= ~(CH_STOPI); - - channel->ch_open_count--; - - /* - * If we have HUPCL set, lower DTR and RTS - */ - if (channel->ch_c_cflag & HUPCL) { - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, - "Close. HUPCL set, dropping DTR/RTS\n"); - - /* Drop RTS/DTR */ - channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); - bd->bd_ops->assert_modem_signals(channel); - } - - /* Turn off UART interrupts for this port */ - channel->ch_bd->bd_ops->uart_off(channel); - - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - - spin_lock_irqsave(&port->lock, lock_flags); - channel->ch_c_cflag = termios->c_cflag; - channel->ch_c_iflag = termios->c_iflag; - channel->ch_c_oflag = termios->c_oflag; - channel->ch_c_lflag = termios->c_lflag; - channel->ch_startc = termios->c_cc[VSTART]; - channel->ch_stopc = termios->c_cc[VSTOP]; - - channel->ch_bd->bd_ops->param(channel); - jsm_carrier(channel); - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static const char *jsm_tty_type(struct uart_port *port) -{ - return "jsm"; -} - -static void jsm_tty_release_port(struct uart_port *port) -{ -} - -static int jsm_tty_request_port(struct uart_port *port) -{ - return 0; -} - -static void jsm_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_JSM; -} - -static struct uart_ops jsm_ops = { - .tx_empty = jsm_tty_tx_empty, - .set_mctrl = jsm_tty_set_mctrl, - .get_mctrl = jsm_tty_get_mctrl, - .stop_tx = jsm_tty_stop_tx, - .start_tx = jsm_tty_start_tx, - .send_xchar = jsm_tty_send_xchar, - .stop_rx = jsm_tty_stop_rx, - .enable_ms = jsm_tty_enable_ms, - .break_ctl = jsm_tty_break, - .startup = jsm_tty_open, - .shutdown = jsm_tty_close, - .set_termios = jsm_tty_set_termios, - .type = jsm_tty_type, - .release_port = jsm_tty_release_port, - .request_port = jsm_tty_request_port, - .config_port = jsm_config_port, -}; - -/* - * jsm_tty_init() - * - * Init the tty subsystem. Called once per board after board has been - * downloaded and init'ed. - */ -int __devinit jsm_tty_init(struct jsm_board *brd) -{ - int i; - void __iomem *vaddr; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* - * Allocate channel memory that might not have been allocated - * when the driver was first loaded. - */ - for (i = 0; i < brd->nasync; i++) { - if (!brd->channels[i]) { - - /* - * Okay to malloc with GFP_KERNEL, we are not at - * interrupt context, and there are no locks held. - */ - brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); - if (!brd->channels[i]) { - jsm_printk(CORE, ERR, &brd->pci_dev, - "%s:%d Unable to allocate memory for channel struct\n", - __FILE__, __LINE__); - } - } - } - - ch = brd->channels[0]; - vaddr = brd->re_map_membase; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { - - if (!brd->channels[i]) - continue; - - spin_lock_init(&ch->ch_lock); - - if (brd->bd_uart_offset == 0x200) - ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); - - ch->ch_bd = brd; - ch->ch_portnum = i; - - /* .25 second delay */ - ch->ch_close_delay = 250; - - init_waitqueue_head(&ch->ch_flags_wait); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -int jsm_uart_port_init(struct jsm_board *brd) -{ - int i, rc; - unsigned int line; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { - - if (!brd->channels[i]) - continue; - - brd->channels[i]->uart_port.irq = brd->irq; - brd->channels[i]->uart_port.uartclk = 14745600; - brd->channels[i]->uart_port.type = PORT_JSM; - brd->channels[i]->uart_port.iotype = UPIO_MEM; - brd->channels[i]->uart_port.membase = brd->re_map_membase; - brd->channels[i]->uart_port.fifosize = 16; - brd->channels[i]->uart_port.ops = &jsm_ops; - line = find_first_zero_bit(linemap, MAXLINES); - if (line >= MAXLINES) { - printk(KERN_INFO "jsm: linemap is full, added device failed\n"); - continue; - } else - set_bit(line, linemap); - brd->channels[i]->uart_port.line = line; - rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); - if (rc){ - printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); - return rc; - } - else - printk(KERN_INFO "jsm: Port %d added\n", i); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -int jsm_remove_uart_port(struct jsm_board *brd) -{ - int i; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++) { - - if (!brd->channels[i]) - continue; - - ch = brd->channels[i]; - - clear_bit(ch->uart_port.line, linemap); - uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -void jsm_input(struct jsm_channel *ch) -{ - struct jsm_board *bd; - struct tty_struct *tp; - u32 rmask; - u16 head; - u16 tail; - int data_len; - unsigned long lock_flags; - int len = 0; - int n = 0; - int s = 0; - int i = 0; - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); - - if (!ch) - return; - - tp = ch->uart_port.state->port.tty; - - bd = ch->ch_bd; - if(!bd) - return; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* - *Figure the number of characters in the buffer. - *Exit immediately if none. - */ - - rmask = RQUEUEMASK; - - head = ch->ch_r_head & rmask; - tail = ch->ch_r_tail & rmask; - - data_len = (head - tail) & rmask; - if (data_len == 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); - - /* - *If the device is not open, or CREAD is off, flush - *input data and return immediately. - */ - if (!tp || - !(tp->termios->c_cflag & CREAD) ) { - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); - ch->ch_r_head = tail; - - /* Force queue flow control to be released, if needed */ - jsm_check_queue_flow_control(ch); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - - /* - * If we are throttled, simply don't read any data. - */ - if (ch->ch_flags & CH_STOPI) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Port %d throttled, not reading any data. head: %x tail: %x\n", - ch->ch_portnum, head, tail); - return; - } - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); - - if (data_len <= 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); - return; - } - - len = tty_buffer_request_room(tp, data_len); - n = len; - - /* - * n now contains the most amount of data we can copy, - * bounded either by the flip buffer size or the amount - * of data the card actually has pending... - */ - while (n) { - s = ((head >= tail) ? head : RQUEUESIZE) - tail; - s = min(s, n); - - if (s <= 0) - break; - - /* - * If conditions are such that ld needs to see all - * UART errors, we will have to walk each character - * and error byte and send them to the buffer one at - * a time. - */ - - if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { - for (i = 0; i < s; i++) { - /* - * Give the Linux ld the flags in the - * format it likes. - */ - if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); - else - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); - } - } else { - tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; - } - tail += s; - n -= s; - /* Flip queue if needed */ - tail &= rmask; - } - - ch->ch_r_tail = tail & rmask; - ch->ch_e_tail = tail & rmask; - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Tell the tty layer its okay to "eat" the data now */ - tty_flip_buffer_push(tp); - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_carrier(struct jsm_channel *ch) -{ - struct jsm_board *bd; - - int virt_carrier = 0; - int phys_carrier = 0; - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); - if (!ch) - return; - - bd = ch->ch_bd; - - if (!bd) - return; - - if (ch->ch_mistat & UART_MSR_DCD) { - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); - phys_carrier = 1; - } - - if (ch->ch_c_cflag & CLOCAL) - virt_carrier = 1; - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); - - /* - * Test for a VIRTUAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { - - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "carrier: virt DCD rose\n"); - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { - - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "carrier: physical DCD rose\n"); - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL transition to low, so long as we aren't - * currently ignoring physical transitions (which is what "virtual - * carrier" indicates). - * - * The transition of the virtual carrier to low really doesn't - * matter... it really only means "ignore carrier state", not - * "make pretend that carrier is there". - */ - if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) - && (phys_carrier == 0)) { - /* - * When carrier drops: - * - * Drop carrier on all open units. - * - * Flush queues, waking up any task waiting in the - * line discipline. - * - * Send a hangup to the control terminal. - * - * Enable all select calls. - */ - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Make sure that our cached values reflect the current reality. - */ - if (virt_carrier == 1) - ch->ch_flags |= CH_FCAR; - else - ch->ch_flags &= ~CH_FCAR; - - if (phys_carrier == 1) - ch->ch_flags |= CH_CD; - else - ch->ch_flags &= ~CH_CD; -} - - -void jsm_check_queue_flow_control(struct jsm_channel *ch) -{ - struct board_ops *bd_ops = ch->ch_bd->bd_ops; - int qleft; - - /* Store how much space we have left in the queue */ - if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) - qleft += RQUEUEMASK + 1; - - /* - * Check to see if we should enforce flow control on our queue because - * the ld (or user) isn't reading data out of our queue fast enuf. - * - * NOTE: This is done based on what the current flow control of the - * port is set for. - * - * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. - * This will cause the UART's FIFO to back up, and force - * the RTS signal to be dropped. - * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to - * the other side, in hopes it will stop sending data to us. - * 3) NONE - Nothing we can do. We will simply drop any extra data - * that gets sent into us when the queue fills up. - */ - if (qleft < 256) { - /* HWFLOW */ - if (ch->ch_c_cflag & CRTSCTS) { - if(!(ch->ch_flags & CH_RECEIVER_OFF)) { - bd_ops->disable_receiver(ch); - ch->ch_flags |= (CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", - qleft); - } - } - /* SWFLOW */ - else if (ch->ch_c_iflag & IXOFF) { - if (ch->ch_stops_sent <= MAX_STOPS_SENT) { - bd_ops->send_stop_character(ch); - ch->ch_stops_sent++; - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); - } - } - } - - /* - * Check to see if we should unenforce flow control because - * ld (or user) finally read enuf data out of our queue. - * - * NOTE: This is done based on what the current flow control of the - * port is set for. - * - * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. - * This will cause the UART's FIFO to raise RTS back up, - * which will allow the other side to start sending data again. - * 2) SWFLOW (IXOFF) - Send a start character to - * the other side, so it will start sending data to us again. - * 3) NONE - Do nothing. Since we didn't do anything to turn off the - * other side, we don't need to do anything now. - */ - if (qleft > (RQUEUESIZE / 2)) { - /* HWFLOW */ - if (ch->ch_c_cflag & CRTSCTS) { - if (ch->ch_flags & CH_RECEIVER_OFF) { - bd_ops->enable_receiver(ch); - ch->ch_flags &= ~(CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", - qleft); - } - } - /* SWFLOW */ - else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { - ch->ch_stops_sent = 0; - bd_ops->send_start_character(ch); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); - } - } -} - -/* - * jsm_tty_write() - * - * Take data from the user or kernel and send it out to the FEP. - * In here exists all the Transparent Print magic as well. - */ -int jsm_tty_write(struct uart_port *port) -{ - int bufcount; - int data_count = 0,data_count1 =0; - u16 head; - u16 tail; - u16 tmask; - u32 remain; - int temp_tail = port->state->xmit.tail; - struct jsm_channel *channel = (struct jsm_channel *)port; - - tmask = WQUEUEMASK; - head = (channel->ch_w_head) & tmask; - tail = (channel->ch_w_tail) & tmask; - - if ((bufcount = tail - head - 1) < 0) - bufcount += WQUEUESIZE; - - bufcount = min(bufcount, 56); - remain = WQUEUESIZE - head; - - data_count = 0; - if (bufcount >= remain) { - bufcount -= remain; - while ((port->state->xmit.head != temp_tail) && - (data_count < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count++; - } - if (data_count == remain) head = 0; - } - - data_count1 = 0; - if (bufcount > 0) { - remain = bufcount; - while ((port->state->xmit.head != temp_tail) && - (data_count1 < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count1++; - - } - } - - port->state->xmit.tail = temp_tail; - - data_count += data_count1; - if (data_count) { - head &= tmask; - channel->ch_w_head = head; - } - - if (data_count) { - channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); - } - - return data_count; -} diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c deleted file mode 100644 index 25a8bc5..0000000 --- a/drivers/serial/kgdboc.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Based on the same principle as kgdboe using the NETPOLL api, this - * driver uses a console polling api to implement a gdb serial inteface - * which is multiplexed on a console port. - * - * Maintainer: Jason Wessel - * - * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_CONFIG_LEN 40 - -static struct kgdb_io kgdboc_io_ops; - -/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ -static int configured = -1; - -static char config[MAX_CONFIG_LEN]; -static struct kparam_string kps = { - .string = config, - .maxlen = MAX_CONFIG_LEN, -}; - -static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ -static struct tty_driver *kgdb_tty_driver; -static int kgdb_tty_line; - -#ifdef CONFIG_KDB_KEYBOARD -static int kgdboc_reset_connect(struct input_handler *handler, - struct input_dev *dev, - const struct input_device_id *id) -{ - input_reset_device(dev); - - /* Retrun an error - we do not want to bind, just to reset */ - return -ENODEV; -} - -static void kgdboc_reset_disconnect(struct input_handle *handle) -{ - /* We do not expect anyone to actually bind to us */ - BUG(); -} - -static const struct input_device_id kgdboc_reset_ids[] = { - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT, - .evbit = { BIT_MASK(EV_KEY) }, - }, - { } -}; - -static struct input_handler kgdboc_reset_handler = { - .connect = kgdboc_reset_connect, - .disconnect = kgdboc_reset_disconnect, - .name = "kgdboc_reset", - .id_table = kgdboc_reset_ids, -}; - -static DEFINE_MUTEX(kgdboc_reset_mutex); - -static void kgdboc_restore_input_helper(struct work_struct *dummy) -{ - /* - * We need to take a mutex to prevent several instances of - * this work running on different CPUs so they don't try - * to register again already registered handler. - */ - mutex_lock(&kgdboc_reset_mutex); - - if (input_register_handler(&kgdboc_reset_handler) == 0) - input_unregister_handler(&kgdboc_reset_handler); - - mutex_unlock(&kgdboc_reset_mutex); -} - -static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); - -static void kgdboc_restore_input(void) -{ - if (likely(system_state == SYSTEM_RUNNING)) - schedule_work(&kgdboc_restore_input_work); -} - -static int kgdboc_register_kbd(char **cptr) -{ - if (strncmp(*cptr, "kbd", 3) == 0) { - if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { - kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; - kdb_poll_idx++; - if (cptr[0][3] == ',') - *cptr += 4; - else - return 1; - } - } - return 0; -} - -static void kgdboc_unregister_kbd(void) -{ - int i; - - for (i = 0; i < kdb_poll_idx; i++) { - if (kdb_poll_funcs[i] == kdb_get_kbd_char) { - kdb_poll_idx--; - kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; - kdb_poll_funcs[kdb_poll_idx] = NULL; - i--; - } - } - flush_work_sync(&kgdboc_restore_input_work); -} -#else /* ! CONFIG_KDB_KEYBOARD */ -#define kgdboc_register_kbd(x) 0 -#define kgdboc_unregister_kbd() -#define kgdboc_restore_input() -#endif /* ! CONFIG_KDB_KEYBOARD */ - -static int kgdboc_option_setup(char *opt) -{ - if (strlen(opt) > MAX_CONFIG_LEN) { - printk(KERN_ERR "kgdboc: config string too long\n"); - return -ENOSPC; - } - strcpy(config, opt); - - return 0; -} - -__setup("kgdboc=", kgdboc_option_setup); - -static void cleanup_kgdboc(void) -{ - kgdboc_unregister_kbd(); - if (configured == 1) - kgdb_unregister_io_module(&kgdboc_io_ops); -} - -static int configure_kgdboc(void) -{ - struct tty_driver *p; - int tty_line = 0; - int err; - char *cptr = config; - struct console *cons; - - err = kgdboc_option_setup(config); - if (err || !strlen(config) || isspace(config[0])) - goto noconfig; - - err = -ENODEV; - kgdboc_io_ops.is_console = 0; - kgdb_tty_driver = NULL; - - kgdboc_use_kms = 0; - if (strncmp(cptr, "kms,", 4) == 0) { - cptr += 4; - kgdboc_use_kms = 1; - } - - if (kgdboc_register_kbd(&cptr)) - goto do_register; - - p = tty_find_polling_driver(cptr, &tty_line); - if (!p) - goto noconfig; - - cons = console_drivers; - while (cons) { - int idx; - if (cons->device && cons->device(cons, &idx) == p && - idx == tty_line) { - kgdboc_io_ops.is_console = 1; - break; - } - cons = cons->next; - } - - kgdb_tty_driver = p; - kgdb_tty_line = tty_line; - -do_register: - err = kgdb_register_io_module(&kgdboc_io_ops); - if (err) - goto noconfig; - - configured = 1; - - return 0; - -noconfig: - config[0] = 0; - configured = 0; - cleanup_kgdboc(); - - return err; -} - -static int __init init_kgdboc(void) -{ - /* Already configured? */ - if (configured == 1) - return 0; - - return configure_kgdboc(); -} - -static int kgdboc_get_char(void) -{ - if (!kgdb_tty_driver) - return -1; - return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, - kgdb_tty_line); -} - -static void kgdboc_put_char(u8 chr) -{ - if (!kgdb_tty_driver) - return; - kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, - kgdb_tty_line, chr); -} - -static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) -{ - int len = strlen(kmessage); - - if (len >= MAX_CONFIG_LEN) { - printk(KERN_ERR "kgdboc: config string too long\n"); - return -ENOSPC; - } - - /* Only copy in the string if the init function has not run yet */ - if (configured < 0) { - strcpy(config, kmessage); - return 0; - } - - if (kgdb_connected) { - printk(KERN_ERR - "kgdboc: Cannot reconfigure while KGDB is connected.\n"); - - return -EBUSY; - } - - strcpy(config, kmessage); - /* Chop out \n char as a result of echo */ - if (config[len - 1] == '\n') - config[len - 1] = '\0'; - - if (configured == 1) - cleanup_kgdboc(); - - /* Go and configure with the new params. */ - return configure_kgdboc(); -} - -static int dbg_restore_graphics; - -static void kgdboc_pre_exp_handler(void) -{ - if (!dbg_restore_graphics && kgdboc_use_kms) { - dbg_restore_graphics = 1; - con_debug_enter(vc_cons[fg_console].d); - } - /* Increment the module count when the debugger is active */ - if (!kgdb_connected) - try_module_get(THIS_MODULE); -} - -static void kgdboc_post_exp_handler(void) -{ - /* decrement the module count when the debugger detaches */ - if (!kgdb_connected) - module_put(THIS_MODULE); - if (kgdboc_use_kms && dbg_restore_graphics) { - dbg_restore_graphics = 0; - con_debug_leave(); - } - kgdboc_restore_input(); -} - -static struct kgdb_io kgdboc_io_ops = { - .name = "kgdboc", - .read_char = kgdboc_get_char, - .write_char = kgdboc_put_char, - .pre_exception = kgdboc_pre_exp_handler, - .post_exception = kgdboc_post_exp_handler, -}; - -#ifdef CONFIG_KGDB_SERIAL_CONSOLE -/* This is only available if kgdboc is a built in for early debugging */ -static int __init kgdboc_early_init(char *opt) -{ - /* save the first character of the config string because the - * init routine can destroy it. - */ - char save_ch; - - kgdboc_option_setup(opt); - save_ch = config[0]; - init_kgdboc(); - config[0] = save_ch; - return 0; -} - -early_param("ekgdboc", kgdboc_early_init); -#endif /* CONFIG_KGDB_SERIAL_CONSOLE */ - -module_init(init_kgdboc); -module_exit(cleanup_kgdboc); -module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); -MODULE_PARM_DESC(kgdboc, "[,baud]"); -MODULE_DESCRIPTION("KGDB Console TTY Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c deleted file mode 100644 index bea5c21..0000000 --- a/drivers/serial/m32r_sio.c +++ /dev/null @@ -1,1192 +0,0 @@ -/* - * m32r_sio.c - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.c. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. Currently, we don't - * support this very well, and it may well be dropped from this driver - * in future. As such, mapbase should be NULL. - * - * membase is an 'ioremapped' cookie. This is compatible with the old - * serial.c driver, and is currently the preferred form. - */ - -#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define PORT_M32R_BASE PORT_M32R_SIO -#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) -#define BAUD_RATE 115200 - -#include -#include "m32r_sio.h" -#include "m32r_sio_reg.h" - -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - -#define PASS_LIMIT 256 - -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - -#define BASE_BAUD 115200 - -/* Standard COM flags */ -#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) - -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#if defined(CONFIG_PLAT_USRV) - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ - -#else /* !CONFIG_PLAT_USRV */ - -#if defined(CONFIG_SERIAL_M32R_PLDSIO) -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ - STD_COM_FLAGS }, /* ttyS0 */ -#else -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ - STD_COM_FLAGS }, /* ttyS0 */ -#endif - -#endif /* !CONFIG_PLAT_USRV */ - -static struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS -}; - -#define UART_NR ARRAY_SIZE(old_serial_port) - -struct uart_sio_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short rev; - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char lsr_break_flag; - - /* - * We provide a per-port pm hook. - */ - void (*pm)(struct uart_port *port, - unsigned int state, unsigned int old); -}; - -struct irq_info { - spinlock_t lock; - struct list_head *head; -}; - -static struct irq_info irq_lists[NR_IRQS]; - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, - [PORT_INDEX(PORT_M32R_SIO)] = { - .name = "M32RSIO", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, -}; - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define __sio_in(x) inw((unsigned long)(x)) -#define __sio_out(v,x) outw((v),(unsigned long)(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned short sbaud; - sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; - __sio_out(sbaud, PLD_ESIO0BAUR); -} - -static void sio_reset(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_init(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); -} - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define __sio_in(x) inl(x) -#define __sio_out(v,x) outl((v),(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned long i, j; - - i = boot_cpu_data.bus_clock / (baud * 16); - j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; - i -= 1; - j = (j + 1) >> 1; - - __sio_out(i, M32R_SIO0_BAUR_PORTL); - __sio_out(j, M32R_SIO0_RBAUR_PORTL); -} - -static void sio_reset(void) -{ - __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ - __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ - __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ -} - -static void sio_init(void) -{ - unsigned int tmp; - - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_STS_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); -} - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -static unsigned int sio_in(struct uart_sio_port *up, int offset) -{ - return __sio_in(up->port.iobase + offset); -} - -static void sio_out(struct uart_sio_port *up, int offset, int value) -{ - __sio_out(value, up->port.iobase + offset); -} - -static unsigned int serial_in(struct uart_sio_port *up, int offset) -{ - if (!offset) - return 0; - - return __sio_in(offset); -} - -static void serial_out(struct uart_sio_port *up, int offset, int value) -{ - if (!offset) - return; - - __sio_out(value, offset); -} - -static void m32r_sio_stop_tx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void m32r_sio_start_tx(struct uart_port *port) -{ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct circ_buf *xmit = &up->port.state->xmit; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - } - while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); -#else - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -#endif -} - -static void m32r_sio_stop_rx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void m32r_sio_enable_ms(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void receive_chars(struct uart_sio_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned char flag; - int max_count = 256; - - do { - ch = sio_in(up, SIORXB); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - - if (*status & UART_LSR_BI) { - DEBUG_INTR("handling break...."); - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (*status & UART_LSR_OE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_sio_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { -#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ - serial_out(up, UART_TX, up->port.x_char); -#endif - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - m32r_sio_stop_tx(&up->port); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); - - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - DEBUG_INTR("THRE..."); - - if (uart_circ_empty(xmit)) - m32r_sio_stop_tx(&up->port); -} - -/* - * This handles the interrupt from one port. - */ -static inline void m32r_sio_handle_port(struct uart_sio_port *up, - unsigned int status) -{ - DEBUG_INTR("status = %x...", status); - - if (status & 0x04) - receive_chars(up, &status); - if (status & 0x01) - transmit_chars(up); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0; - - DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO -// if (irq == PLD_IRQ_SIO0_SND) -// irq = PLD_IRQ_SIO0_RCV; -#else - if (irq == M32R_IRQ_SIO0_S) - irq = M32R_IRQ_SIO0_R; -#endif - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_sio_port *up; - unsigned int sts; - - up = list_entry(l, struct uart_sio_port, list); - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - if (sts & 0xe0) - sio_error(&sts); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - DEBUG_INTR("end.\n"); - - return IRQ_HANDLED; -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - - spin_unlock_irq(&i->lock); -} - -static int serial_link_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = 0; - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - - ret = request_irq(up->port.irq, m32r_sio_interrupt, - irq_flags, "SIO0-RX", i); - ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, - irq_flags, "SIO0-TX", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) { - free_irq(up->port.irq, i); - free_irq(up->port.irq + 1, i); - } - - serial_do_unlink(i, up); -} - -/* - * This function is used to handle ports that do not have an interrupt. - */ -static void m32r_sio_timeout(unsigned long data) -{ - struct uart_sio_port *up = (struct uart_sio_port *)data; - unsigned int timeout; - unsigned int sts; - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - } - - timeout = up->port.timeout; - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - mod_timer(&up->timer, jiffies + timeout); -} - -static unsigned int m32r_sio_tx_empty(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int m32r_sio_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - -} - -static void m32r_sio_break_ctl(struct uart_port *port, int break_state) -{ - -} - -static int m32r_sio_startup(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - int retval; - - sio_init(); - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!is_real_interrupt(up->port.irq)) { - unsigned int timeout = up->port.timeout; - - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + timeout); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - * - M32R_SIO: 0x0c - * - M32R_PLDSIO: 0x04 - */ - up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - sio_out(up, SIOTRCR, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - sio_reset(); - - return 0; -} - -static void m32r_sio_shutdown(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - sio_out(up, SIOTRCR, 0); - - /* - * Disable break condition and FIFOs - */ - - sio_init(); - - if (!is_real_interrupt(up->port.irq)) - del_timer_sync(&up->timer); - else - serial_unlink_irq_chain(up); -} - -static unsigned int m32r_sio_get_divisor(struct uart_port *port, - unsigned int baud) -{ - return uart_get_divisor(port, baud); -} - -static void m32r_sio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned char cval = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -#else - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -#endif - quot = m32r_sio_get_divisor(port, baud); - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - sio_set_baud_rate(baud); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - up->lcr = cval; /* Save LCR */ - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void m32r_sio_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->pm) - up->pm(port, state, oldstate); -} - -/* - * Resource handling. This is complicated by the fact that resources - * depend on the port type. Maybe we should be claiming the standard - * 8250 ports, and then trying to get other resources as necessary? - */ -static int -m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) -{ - unsigned int size = 8 << up->port.regshift; -#ifndef CONFIG_SERIAL_M32R_PLDSIO - unsigned long start; -#endif - int ret = 0; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { -#ifdef CONFIG_SERIAL_M32R_PLDSIO - *res = request_mem_region(up->port.mapbase, size, "serial"); -#else - start = up->port.mapbase; - *res = request_mem_region(start, size, "serial"); -#endif - if (!*res) - ret = -EBUSY; - } - break; - - case UPIO_PORT: - *res = request_region(up->port.iobase, size, "serial"); - if (!*res) - ret = -EBUSY; - break; - } - return ret; -} - -static void m32r_sio_release_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long start, offset = 0, size = 0; - - size <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { - /* - * Unmap the area. - */ - iounmap(up->port.membase); - up->port.membase = NULL; - - start = up->port.mapbase; - - if (size) - release_mem_region(start + offset, size); - release_mem_region(start, 8 << up->port.regshift); - } - break; - - case UPIO_PORT: - start = up->port.iobase; - - if (size) - release_region(start + offset, size); - release_region(start + offset, 8 << up->port.regshift); - break; - - default: - break; - } -} - -static int m32r_sio_request_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct resource *res = NULL; - int ret = 0; - - ret = m32r_sio_request_std_resource(up, &res); - - /* - * If we have a mapbase, then request that as well. - */ - if (ret == 0 && up->port.flags & UPF_IOREMAP) { - int size = res->end - res->start + 1; - - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) - ret = -ENOMEM; - } - - if (ret < 0) { - if (res) - release_resource(res); - } - - return ret; -} - -static void m32r_sio_config_port(struct uart_port *port, int flags) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int -m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config)) - return -EINVAL; - return 0; -} - -static const char * -m32r_sio_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops m32r_sio_pops = { - .tx_empty = m32r_sio_tx_empty, - .set_mctrl = m32r_sio_set_mctrl, - .get_mctrl = m32r_sio_get_mctrl, - .stop_tx = m32r_sio_stop_tx, - .start_tx = m32r_sio_start_tx, - .stop_rx = m32r_sio_stop_rx, - .enable_ms = m32r_sio_enable_ms, - .break_ctl = m32r_sio_break_ctl, - .startup = m32r_sio_startup, - .shutdown = m32r_sio_shutdown, - .set_termios = m32r_sio_set_termios, - .pm = m32r_sio_pm, - .type = m32r_sio_type, - .release_port = m32r_sio_release_port, - .request_port = m32r_sio_request_port, - .config_port = m32r_sio_config_port, - .verify_port = m32r_sio_verify_port, -}; - -static struct uart_sio_port m32r_sio_ports[UART_NR]; - -static void __init m32r_sio_init_ports(void) -{ - struct uart_sio_port *up; - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - up->port.ops = &m32r_sio_pops; - } -} - -static void __init m32r_sio_register_ports(struct uart_driver *drv) -{ - int i; - - m32r_sio_init_ports(); - - for (i = 0; i < UART_NR; i++) { - struct uart_sio_port *up = &m32r_sio_ports[i]; - - up->port.line = i; - up->port.ops = &m32r_sio_pops; - init_timer(&up->timer); - up->timer.function = m32r_sio_timeout; - - /* - * ALPHA_KLUDGE_MCR needs to be killed. - */ - up->mcr_mask = ~ALPHA_KLUDGE_MCR; - up->mcr_force = ALPHA_KLUDGE_MCR; - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_sio_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = sio_in(up, SIOSTS); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & UART_EMPTY) != UART_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) - udelay(1); - } -} - -static void m32r_sio_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - wait_for_xmitr(up); - sio_out(up, SIOTXB, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void m32r_sio_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sio_port *up = &m32r_sio_ports[co->index]; - unsigned int ier; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, SIOTRCR); - sio_out(up, SIOTRCR, 0); - - uart_console_write(&up->port, s, count, m32r_sio_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, SIOTRCR, ier); -} - -static int __init m32r_sio_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &m32r_sio_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver m32r_sio_reg; -static struct console m32r_sio_console = { - .name = "ttyS", - .write = m32r_sio_console_write, - .device = uart_console_device, - .setup = m32r_sio_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &m32r_sio_reg, -}; - -static int __init m32r_sio_console_init(void) -{ - sio_reset(); - sio_init(); - m32r_sio_init_ports(); - register_console(&m32r_sio_console); - return 0; -} -console_initcall(m32r_sio_console_init); - -#define M32R_SIO_CONSOLE &m32r_sio_console -#else -#define M32R_SIO_CONSOLE NULL -#endif - -static struct uart_driver m32r_sio_reg = { - .owner = THIS_MODULE, - .driver_name = "sio", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = M32R_SIO_CONSOLE, -}; - -/** - * m32r_sio_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void m32r_sio_suspend_port(int line) -{ - uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -/** - * m32r_sio_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void m32r_sio_resume_port(int line) -{ - uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -static int __init m32r_sio_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: M32R SIO driver\n"); - - for (i = 0; i < nr_irqs; i++) - spin_lock_init(&irq_lists[i].lock); - - ret = uart_register_driver(&m32r_sio_reg); - if (ret >= 0) - m32r_sio_register_ports(&m32r_sio_reg); - - return ret; -} - -static void __exit m32r_sio_exit(void) -{ - int i; - - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); - - uart_unregister_driver(&m32r_sio_reg); -} - -module_init(m32r_sio_init); -module_exit(m32r_sio_exit); - -EXPORT_SYMBOL(m32r_sio_suspend_port); -EXPORT_SYMBOL(m32r_sio_resume_port); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h deleted file mode 100644 index e9b7e11..0000000 --- a/drivers/serial/m32r_sio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * m32r_sio.h - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.h. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - - -struct m32r_sio_probe { - struct module *owner; - int (*pci_init_one)(struct pci_dev *dev); - void (*pci_remove_one)(struct pci_dev *dev); - void (*pnp_init)(void); -}; - -int m32r_sio_register_probe(struct m32r_sio_probe *probe); -void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); -void m32r_sio_get_irq_map(unsigned int *map); -void m32r_sio_suspend_port(int line); -void m32r_sio_resume_port(int line); - -struct old_serial_port { - unsigned int uart; - unsigned int baud_base; - unsigned int port; - unsigned int irq; - unsigned int flags; - unsigned char io_type; - unsigned char __iomem *iomem_base; - unsigned short iomem_reg_shift; -}; - -#define _INLINE_ inline - -#define PROBE_RSA (1 << 0) -#define PROBE_ANY (~0) - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/serial/m32r_sio_reg.h b/drivers/serial/m32r_sio_reg.h deleted file mode 100644 index 4671473..0000000 --- a/drivers/serial/m32r_sio_reg.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * m32r_sio_reg.h - * - * Copyright (C) 1992, 1994 by Theodore Ts'o. - * Copyright (C) 2004 Hirokazu Takata - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - * - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#ifndef _M32R_SIO_REG_H -#define _M32R_SIO_REG_H - - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define SIOCR 0x000 -#define SIOMOD0 0x002 -#define SIOMOD1 0x004 -#define SIOSTS 0x006 -#define SIOTRCR 0x008 -#define SIOBAUR 0x00a -// #define SIORBAUR 0x018 -#define SIOTXB 0x00c -#define SIORXB 0x00e - -#define UART_RX ((unsigned long) PLD_ESIO0RXB) - /* In: Receive buffer (DLAB=0) */ -#define UART_TX ((unsigned long) PLD_ESIO0TXB) - /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER ((unsigned long) PLD_ESIO0INTCR) - /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR ((unsigned long) PLD_ESIO0STS) - /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define SIOCR 0x000 -#define SIOMOD0 0x004 -#define SIOMOD1 0x008 -#define SIOSTS 0x00c -#define SIOTRCR 0x010 -#define SIOBAUR 0x014 -#define SIORBAUR 0x018 -#define SIOTXB 0x01c -#define SIORXB 0x020 - -#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ -#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * These are the definitions for the Line Control Register - * - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x02 /* Transmitter empty */ -#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x00 /* Break interrupt indicator */ -#define UART_LSR_FE 0x80 /* Frame error indicator */ -#define UART_LSR_PE 0x40 /* Parity error indicator */ -#define UART_LSR_OE 0x20 /* Overrun error indicator */ -#define UART_LSR_DR 0x04 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ - -#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c deleted file mode 100644 index beb1afa..0000000 --- a/drivers/serial/max3100.c +++ /dev/null @@ -1,926 +0,0 @@ -/* - * - * Copyright (C) 2008 Christian Pellegrin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * - * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have - * to use polling for flow control. TX empty IRQ is unusable, since - * writing conf clears FIFO buffer and we cannot have this interrupt - * always asking us for attention. - * - * Example platform data: - - static struct plat_max3100 max3100_plat_data = { - .loopback = 0, - .crystal = 0, - .poll_time = 100, - }; - - static struct spi_board_info spi_board_info[] = { - { - .modalias = "max3100", - .platform_data = &max3100_plat_data, - .irq = IRQ_EINT12, - .max_speed_hz = 5*1000*1000, - .chip_select = 0, - }, - }; - - * The initial minor number is 209 in the low-density serial port: - * mknod /dev/ttyMAX0 c 204 209 - */ - -#define MAX3100_MAJOR 204 -#define MAX3100_MINOR 209 -/* 4 MAX3100s should be enough for everyone */ -#define MAX_MAX3100 4 - -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MAX3100_C (1<<14) -#define MAX3100_D (0<<14) -#define MAX3100_W (1<<15) -#define MAX3100_RX (0<<15) - -#define MAX3100_WC (MAX3100_W | MAX3100_C) -#define MAX3100_RC (MAX3100_RX | MAX3100_C) -#define MAX3100_WD (MAX3100_W | MAX3100_D) -#define MAX3100_RD (MAX3100_RX | MAX3100_D) -#define MAX3100_CMD (3 << 14) - -#define MAX3100_T (1<<14) -#define MAX3100_R (1<<15) - -#define MAX3100_FEN (1<<13) -#define MAX3100_SHDN (1<<12) -#define MAX3100_TM (1<<11) -#define MAX3100_RM (1<<10) -#define MAX3100_PM (1<<9) -#define MAX3100_RAM (1<<8) -#define MAX3100_IR (1<<7) -#define MAX3100_ST (1<<6) -#define MAX3100_PE (1<<5) -#define MAX3100_L (1<<4) -#define MAX3100_BAUD (0xf) - -#define MAX3100_TE (1<<10) -#define MAX3100_RAFE (1<<10) -#define MAX3100_RTS (1<<9) -#define MAX3100_CTS (1<<9) -#define MAX3100_PT (1<<8) -#define MAX3100_DATA (0xff) - -#define MAX3100_RT (MAX3100_R | MAX3100_T) -#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) - -/* the following simulate a status reg for ignore_status_mask */ -#define MAX3100_STATUS_PE 1 -#define MAX3100_STATUS_FE 2 -#define MAX3100_STATUS_OE 4 - -struct max3100_port { - struct uart_port port; - struct spi_device *spi; - - int cts; /* last CTS received for flow ctrl */ - int tx_empty; /* last TX empty bit */ - - spinlock_t conf_lock; /* shared data */ - int conf_commit; /* need to make changes */ - int conf; /* configuration for the MAX31000 - * (bits 0-7, bits 8-11 are irqs) */ - int rts_commit; /* need to change rts */ - int rts; /* rts status */ - int baud; /* current baud rate */ - - int parity; /* keeps track if we should send parity */ -#define MAX3100_PARITY_ON 1 -#define MAX3100_PARITY_ODD 2 -#define MAX3100_7BIT 4 - int rx_enabled; /* if we should rx chars */ - - int irq; /* irq assigned to the max3100 */ - - int minor; /* minor number */ - int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ - int loopback; /* 1 if we are in loopback mode */ - - /* for handling irqs: need workqueue since we do spi_sync */ - struct workqueue_struct *workqueue; - struct work_struct work; - /* set to 1 to make the workhandler exit as soon as possible */ - int force_end_work; - /* need to know we are suspending to avoid deadlock on workqueue */ - int suspending; - - /* hook for suspending MAX3100 via dedicated pin */ - void (*max3100_hw_suspend) (int suspend); - - /* poll time (in ms) for ctrl lines */ - int poll_time; - /* and its timer */ - struct timer_list timer; -}; - -static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ -static DEFINE_MUTEX(max3100s_lock); /* race on probe */ - -static int max3100_do_parity(struct max3100_port *s, u16 c) -{ - int parity; - - if (s->parity & MAX3100_PARITY_ODD) - parity = 1; - else - parity = 0; - - if (s->parity & MAX3100_7BIT) - c &= 0x7f; - else - c &= 0xff; - - parity = parity ^ (hweight8(c) & 1); - return parity; -} - -static int max3100_check_parity(struct max3100_port *s, u16 c) -{ - return max3100_do_parity(s, c) == ((c >> 8) & 1); -} - -static void max3100_calc_parity(struct max3100_port *s, u16 *c) -{ - if (s->parity & MAX3100_7BIT) - *c &= 0x7f; - else - *c &= 0xff; - - if (s->parity & MAX3100_PARITY_ON) - *c |= max3100_do_parity(s, *c) << 8; -} - -static void max3100_work(struct work_struct *w); - -static void max3100_dowork(struct max3100_port *s) -{ - if (!s->force_end_work && !work_pending(&s->work) && - !freezing(current) && !s->suspending) - queue_work(s->workqueue, &s->work); -} - -static void max3100_timeout(unsigned long data) -{ - struct max3100_port *s = (struct max3100_port *)data; - - if (s->port.state) { - max3100_dowork(s); - mod_timer(&s->timer, jiffies + s->poll_time); - } -} - -static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) -{ - struct spi_message message; - u16 etx, erx; - int status; - struct spi_transfer tran = { - .tx_buf = &etx, - .rx_buf = &erx, - .len = 2, - }; - - etx = cpu_to_be16(tx); - spi_message_init(&message); - spi_message_add_tail(&tran, &message); - status = spi_sync(s->spi, &message); - if (status) { - dev_warn(&s->spi->dev, "error while calling spi_sync\n"); - return -EIO; - } - *rx = be16_to_cpu(erx); - s->tx_empty = (*rx & MAX3100_T) > 0; - dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); - return 0; -} - -static int max3100_handlerx(struct max3100_port *s, u16 rx) -{ - unsigned int ch, flg, status = 0; - int ret = 0, cts; - - if (rx & MAX3100_R && s->rx_enabled) { - dev_dbg(&s->spi->dev, "%s\n", __func__); - ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); - if (rx & MAX3100_RAFE) { - s->port.icount.frame++; - flg = TTY_FRAME; - status |= MAX3100_STATUS_FE; - } else { - if (s->parity & MAX3100_PARITY_ON) { - if (max3100_check_parity(s, rx)) { - s->port.icount.rx++; - flg = TTY_NORMAL; - } else { - s->port.icount.parity++; - flg = TTY_PARITY; - status |= MAX3100_STATUS_PE; - } - } else { - s->port.icount.rx++; - flg = TTY_NORMAL; - } - } - uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); - ret = 1; - } - - cts = (rx & MAX3100_CTS) > 0; - if (s->cts != cts) { - s->cts = cts; - uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); - } - - return ret; -} - -static void max3100_work(struct work_struct *w) -{ - struct max3100_port *s = container_of(w, struct max3100_port, work); - int rxchars; - u16 tx, rx; - int conf, cconf, rts, crts; - struct circ_buf *xmit = &s->port.state->xmit; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - rxchars = 0; - do { - spin_lock(&s->conf_lock); - conf = s->conf; - cconf = s->conf_commit; - s->conf_commit = 0; - rts = s->rts; - crts = s->rts_commit; - s->rts_commit = 0; - spin_unlock(&s->conf_lock); - if (cconf) - max3100_sr(s, MAX3100_WC | conf, &rx); - if (crts) { - max3100_sr(s, MAX3100_WD | MAX3100_TE | - (s->rts ? MAX3100_RTS : 0), &rx); - rxchars += max3100_handlerx(s, rx); - } - - max3100_sr(s, MAX3100_RD, &rx); - rxchars += max3100_handlerx(s, rx); - - if (rx & MAX3100_T) { - tx = 0xffff; - if (s->port.x_char) { - tx = s->port.x_char; - s->port.icount.tx++; - s->port.x_char = 0; - } else if (!uart_circ_empty(xmit) && - !uart_tx_stopped(&s->port)) { - tx = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - s->port.icount.tx++; - } - if (tx != 0xffff) { - max3100_calc_parity(s, &tx); - tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); - max3100_sr(s, tx, &rx); - rxchars += max3100_handlerx(s, rx); - } - } - - if (rxchars > 16 && s->port.state->port.tty != NULL) { - tty_flip_buffer_push(s->port.state->port.tty); - rxchars = 0; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - - } while (!s->force_end_work && - !freezing(current) && - ((rx & MAX3100_R) || - (!uart_circ_empty(xmit) && - !uart_tx_stopped(&s->port)))); - - if (rxchars > 0 && s->port.state->port.tty != NULL) - tty_flip_buffer_push(s->port.state->port.tty); -} - -static irqreturn_t max3100_irq(int irqno, void *dev_id) -{ - struct max3100_port *s = dev_id; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - max3100_dowork(s); - return IRQ_HANDLED; -} - -static void max3100_enable_ms(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - if (s->poll_time > 0) - mod_timer(&s->timer, jiffies); - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static void max3100_start_tx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - max3100_dowork(s); -} - -static void max3100_stop_rx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - s->rx_enabled = 0; - spin_lock(&s->conf_lock); - s->conf &= ~MAX3100_RM; - s->conf_commit = 1; - spin_unlock(&s->conf_lock); - max3100_dowork(s); -} - -static unsigned int max3100_tx_empty(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - /* may not be truly up-to-date */ - max3100_dowork(s); - return s->tx_empty; -} - -static unsigned int max3100_get_mctrl(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - /* may not be truly up-to-date */ - max3100_dowork(s); - /* always assert DCD and DSR since these lines are not wired */ - return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; -} - -static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int rts; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - rts = (mctrl & TIOCM_RTS) > 0; - - spin_lock(&s->conf_lock); - if (s->rts != rts) { - s->rts = rts; - s->rts_commit = 1; - max3100_dowork(s); - } - spin_unlock(&s->conf_lock); -} - -static void -max3100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int baud = 0; - unsigned cflag; - u32 param_new, param_mask, parity = 0; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - cflag = termios->c_cflag; - param_new = 0; - param_mask = 0; - - baud = tty_termios_baud_rate(termios); - param_new = s->conf & MAX3100_BAUD; - switch (baud) { - case 300: - if (s->crystal) - baud = s->baud; - else - param_new = 15; - break; - case 600: - param_new = 14 + s->crystal; - break; - case 1200: - param_new = 13 + s->crystal; - break; - case 2400: - param_new = 12 + s->crystal; - break; - case 4800: - param_new = 11 + s->crystal; - break; - case 9600: - param_new = 10 + s->crystal; - break; - case 19200: - param_new = 9 + s->crystal; - break; - case 38400: - param_new = 8 + s->crystal; - break; - case 57600: - param_new = 1 + s->crystal; - break; - case 115200: - param_new = 0 + s->crystal; - break; - case 230400: - if (s->crystal) - param_new = 0; - else - baud = s->baud; - break; - default: - baud = s->baud; - } - tty_termios_encode_baud_rate(termios, baud, baud); - s->baud = baud; - param_mask |= MAX3100_BAUD; - - if ((cflag & CSIZE) == CS8) { - param_new &= ~MAX3100_L; - parity &= ~MAX3100_7BIT; - } else { - param_new |= MAX3100_L; - parity |= MAX3100_7BIT; - cflag = (cflag & ~CSIZE) | CS7; - } - param_mask |= MAX3100_L; - - if (cflag & CSTOPB) - param_new |= MAX3100_ST; - else - param_new &= ~MAX3100_ST; - param_mask |= MAX3100_ST; - - if (cflag & PARENB) { - param_new |= MAX3100_PE; - parity |= MAX3100_PARITY_ON; - } else { - param_new &= ~MAX3100_PE; - parity &= ~MAX3100_PARITY_ON; - } - param_mask |= MAX3100_PE; - - if (cflag & PARODD) - parity |= MAX3100_PARITY_ODD; - else - parity &= ~MAX3100_PARITY_ODD; - - /* mask termios capabilities we don't support */ - cflag &= ~CMSPAR; - termios->c_cflag = cflag; - - s->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - s->port.ignore_status_mask |= - MAX3100_STATUS_PE | MAX3100_STATUS_FE | - MAX3100_STATUS_OE; - - /* we are sending char from a workqueue so enable */ - s->port.state->port.tty->low_latency = 1; - - if (s->poll_time > 0) - del_timer_sync(&s->timer); - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_lock(&s->conf_lock); - s->conf = (s->conf & ~param_mask) | (param_new & param_mask); - s->conf_commit = 1; - s->parity = parity; - spin_unlock(&s->conf_lock); - max3100_dowork(s); - - if (UART_ENABLE_MS(&s->port, termios->c_cflag)) - max3100_enable_ms(&s->port); -} - -static void max3100_shutdown(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (s->suspending) - return; - - s->force_end_work = 1; - - if (s->poll_time > 0) - del_timer_sync(&s->timer); - - if (s->workqueue) { - flush_workqueue(s->workqueue); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - } - if (s->irq) - free_irq(s->irq, s); - - /* set shutdown mode to save power */ - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(1); - else { - u16 tx, rx; - - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(s, tx, &rx); - } -} - -static int max3100_startup(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - char b[12]; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - s->conf = MAX3100_RM; - s->baud = s->crystal ? 230400 : 115200; - s->rx_enabled = 1; - - if (s->suspending) - return 0; - - s->force_end_work = 0; - s->parity = 0; - s->rts = 0; - - sprintf(b, "max3100-%d", s->minor); - s->workqueue = create_freezeable_workqueue(b); - if (!s->workqueue) { - dev_warn(&s->spi->dev, "cannot create workqueue\n"); - return -EBUSY; - } - INIT_WORK(&s->work, max3100_work); - - if (request_irq(s->irq, max3100_irq, - IRQF_TRIGGER_FALLING, "max3100", s) < 0) { - dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); - s->irq = 0; - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - return -EBUSY; - } - - if (s->loopback) { - u16 tx, rx; - tx = 0x4001; - max3100_sr(s, tx, &rx); - } - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(0); - s->conf_commit = 1; - max3100_dowork(s); - /* wait for clock to settle */ - msleep(50); - - max3100_enable_ms(&s->port); - - return 0; -} - -static const char *max3100_type(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; -} - -static void max3100_release_port(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static void max3100_config_port(struct uart_port *port, int flags) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (flags & UART_CONFIG_TYPE) - s->port.type = PORT_MAX3100; -} - -static int max3100_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int ret = -EINVAL; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) - ret = 0; - return ret; -} - -static void max3100_stop_tx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static int max3100_request_port(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - return 0; -} - -static void max3100_break_ctl(struct uart_port *port, int break_state) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static struct uart_ops max3100_ops = { - .tx_empty = max3100_tx_empty, - .set_mctrl = max3100_set_mctrl, - .get_mctrl = max3100_get_mctrl, - .stop_tx = max3100_stop_tx, - .start_tx = max3100_start_tx, - .stop_rx = max3100_stop_rx, - .enable_ms = max3100_enable_ms, - .break_ctl = max3100_break_ctl, - .startup = max3100_startup, - .shutdown = max3100_shutdown, - .set_termios = max3100_set_termios, - .type = max3100_type, - .release_port = max3100_release_port, - .request_port = max3100_request_port, - .config_port = max3100_config_port, - .verify_port = max3100_verify_port, -}; - -static struct uart_driver max3100_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyMAX", - .dev_name = "ttyMAX", - .major = MAX3100_MAJOR, - .minor = MAX3100_MINOR, - .nr = MAX_MAX3100, -}; -static int uart_driver_registered; - -static int __devinit max3100_probe(struct spi_device *spi) -{ - int i, retval; - struct plat_max3100 *pdata; - u16 tx, rx; - - mutex_lock(&max3100s_lock); - - if (!uart_driver_registered) { - uart_driver_registered = 1; - retval = uart_register_driver(&max3100_uart_driver); - if (retval) { - printk(KERN_ERR "Couldn't register max3100 uart driver\n"); - mutex_unlock(&max3100s_lock); - return retval; - } - } - - for (i = 0; i < MAX_MAX3100; i++) - if (!max3100s[i]) - break; - if (i == MAX_MAX3100) { - dev_warn(&spi->dev, "too many MAX3100 chips\n"); - mutex_unlock(&max3100s_lock); - return -ENOMEM; - } - - max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); - if (!max3100s[i]) { - dev_warn(&spi->dev, - "kmalloc for max3100 structure %d failed!\n", i); - mutex_unlock(&max3100s_lock); - return -ENOMEM; - } - max3100s[i]->spi = spi; - max3100s[i]->irq = spi->irq; - spin_lock_init(&max3100s[i]->conf_lock); - dev_set_drvdata(&spi->dev, max3100s[i]); - pdata = spi->dev.platform_data; - max3100s[i]->crystal = pdata->crystal; - max3100s[i]->loopback = pdata->loopback; - max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; - if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) - max3100s[i]->poll_time = 1; - max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; - max3100s[i]->minor = i; - init_timer(&max3100s[i]->timer); - max3100s[i]->timer.function = max3100_timeout; - max3100s[i]->timer.data = (unsigned long) max3100s[i]; - - dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); - max3100s[i]->port.irq = max3100s[i]->irq; - max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; - max3100s[i]->port.fifosize = 16; - max3100s[i]->port.ops = &max3100_ops; - max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - max3100s[i]->port.line = i; - max3100s[i]->port.type = PORT_MAX3100; - max3100s[i]->port.dev = &spi->dev; - retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); - if (retval < 0) - dev_warn(&spi->dev, - "uart_add_one_port failed for line %d with error %d\n", - i, retval); - - /* set shutdown mode to save power. Will be woken-up on open */ - if (max3100s[i]->max3100_hw_suspend) - max3100s[i]->max3100_hw_suspend(1); - else { - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(max3100s[i], tx, &rx); - } - mutex_unlock(&max3100s_lock); - return 0; -} - -static int __devexit max3100_remove(struct spi_device *spi) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - int i; - - mutex_lock(&max3100s_lock); - - /* find out the index for the chip we are removing */ - for (i = 0; i < MAX_MAX3100; i++) - if (max3100s[i] == s) - break; - - dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); - uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); - kfree(max3100s[i]); - max3100s[i] = NULL; - - /* check if this is the last chip we have */ - for (i = 0; i < MAX_MAX3100; i++) - if (max3100s[i]) { - mutex_unlock(&max3100s_lock); - return 0; - } - pr_debug("removing max3100 driver\n"); - uart_unregister_driver(&max3100_uart_driver); - - mutex_unlock(&max3100s_lock); - return 0; -} - -#ifdef CONFIG_PM - -static int max3100_suspend(struct spi_device *spi, pm_message_t state) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - disable_irq(s->irq); - - s->suspending = 1; - uart_suspend_port(&max3100_uart_driver, &s->port); - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(1); - else { - /* no HW suspend, so do SW one */ - u16 tx, rx; - - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(s, tx, &rx); - } - return 0; -} - -static int max3100_resume(struct spi_device *spi) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(0); - uart_resume_port(&max3100_uart_driver, &s->port); - s->suspending = 0; - - enable_irq(s->irq); - - s->conf_commit = 1; - if (s->workqueue) - max3100_dowork(s); - - return 0; -} - -#else -#define max3100_suspend NULL -#define max3100_resume NULL -#endif - -static struct spi_driver max3100_driver = { - .driver = { - .name = "max3100", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - - .probe = max3100_probe, - .remove = __devexit_p(max3100_remove), - .suspend = max3100_suspend, - .resume = max3100_resume, -}; - -static int __init max3100_init(void) -{ - return spi_register_driver(&max3100_driver); -} -module_init(max3100_init); - -static void __exit max3100_exit(void) -{ - spi_unregister_driver(&max3100_driver); -} -module_exit(max3100_exit); - -MODULE_DESCRIPTION("MAX3100 driver"); -MODULE_AUTHOR("Christian Pellegrin "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:max3100"); diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c deleted file mode 100644 index a1fe304..0000000 --- a/drivers/serial/max3107-aava.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin - * and max3110.c - * by Feng Tang - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "max3107.h" - -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, -}; - -/** - * max3107_aava_reset - reset on AAVA systems - * @spi: The SPI device we are probing - * - * Reset the device ready for probing. - */ - -static int max3107_aava_reset(struct spi_device *spi) -{ - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - return 0; -} - -static int max3107_aava_configure(struct max3107_port *s) -{ - int retval; - - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = s->spi->modalias; - s->chip.dev = &s->spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; - } - - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - return 0; -} - -#if 0 -/* This will get enabled once we have the board stuff merged for this - specific case */ - -static const struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static void max3107_aava_init(struct max3107_port *s) -{ - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -} -#endif - -static int __devexit max3107_aava_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&spi->dev, "Removing GPIO chip failed\n"); - - /* Then do the default remove */ - return max3107_remove(spi); -} - -/* Platform data */ -static struct max3107_plat aava_plat_data = { - .loopback = 0, - .ext_clk = 1, -/* .init = max3107_aava_init, */ - .configure = max3107_aava_configure, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -static int __devinit max3107_probe_aava(struct spi_device *spi) -{ - int err = max3107_aava_reset(spi); - if (err < 0) - return err; - return max3107_probe(spi, &aava_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "aava-max3107", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = max3107_probe_aava, - .remove = __devexit_p(max3107_aava_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c deleted file mode 100644 index 910870e..0000000 --- a/drivers/serial/max3107.c +++ /dev/null @@ -1,1213 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin - * and max3110.c - * by Feng Tang - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include "max3107.h" - -static const struct baud_table brg26_ext[] = { - { 300, MAX3107_BRG26_B300 }, - { 600, MAX3107_BRG26_B600 }, - { 1200, MAX3107_BRG26_B1200 }, - { 2400, MAX3107_BRG26_B2400 }, - { 4800, MAX3107_BRG26_B4800 }, - { 9600, MAX3107_BRG26_B9600 }, - { 19200, MAX3107_BRG26_B19200 }, - { 57600, MAX3107_BRG26_B57600 }, - { 115200, MAX3107_BRG26_B115200 }, - { 230400, MAX3107_BRG26_B230400 }, - { 460800, MAX3107_BRG26_B460800 }, - { 921600, MAX3107_BRG26_B921600 }, - { 0, 0 } -}; - -static const struct baud_table brg13_int[] = { - { 300, MAX3107_BRG13_IB300 }, - { 600, MAX3107_BRG13_IB600 }, - { 1200, MAX3107_BRG13_IB1200 }, - { 2400, MAX3107_BRG13_IB2400 }, - { 4800, MAX3107_BRG13_IB4800 }, - { 9600, MAX3107_BRG13_IB9600 }, - { 19200, MAX3107_BRG13_IB19200 }, - { 57600, MAX3107_BRG13_IB57600 }, - { 115200, MAX3107_BRG13_IB115200 }, - { 230400, MAX3107_BRG13_IB230400 }, - { 460800, MAX3107_BRG13_IB460800 }, - { 921600, MAX3107_BRG13_IB921600 }, - { 0, 0 } -}; - -static u32 get_new_brg(int baud, struct max3107_port *s) -{ - int i; - const struct baud_table *baud_tbl = s->baud_tbl; - - for (i = 0; i < 13; i++) { - if (baud == baud_tbl[i].baud) - return baud_tbl[i].new_brg; - } - - return 0; -} - -/* Perform SPI transfer for write/read of device register(s) */ -int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) -{ - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - /* Initialize SPI ,message */ - spi_message_init(&spi_msg); - - /* Initialize SPI transfer */ - memset(&spi_xfer, 0, sizeof spi_xfer); - spi_xfer.len = len; - spi_xfer.tx_buf = tx; - spi_xfer.rx_buf = rx; - spi_xfer.speed_hz = MAX3107_SPI_SPEED; - - /* Add SPI transfer to SPI message */ - spi_message_add_tail(&spi_xfer, &spi_msg); - -#ifdef DBG_TRACE_SPI_DATA - { - int i; - pr_info("tx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); - pr_info("\n"); - } -#endif - - /* Perform synchronous SPI transfer */ - if (spi_sync(s->spi, &spi_msg)) { - dev_err(&s->spi->dev, "spi_sync failure\n"); - return -EIO; - } - -#ifdef DBG_TRACE_SPI_DATA - if (spi_xfer.rx_buf) { - int i; - pr_info("rx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); - pr_info("\n"); - } -#endif - return 0; -} -EXPORT_SYMBOL_GPL(max3107_rw); - -/* Puts received data to circular buffer */ -static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, - int len) -{ - struct uart_port *port = &s->port; - struct tty_struct *tty; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Insert received data */ - tty_insert_flip_string(tty, data, len); - /* Update RX counter */ - port->icount.rx += len; -} - -/* Handle data receiving */ -static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) -{ - int i; - int j; - int len; /* SPI transfer buffer length */ - u16 *buf; - u8 *valid_str; - - if (!s->rx_enabled) - /* RX is disabled */ - return; - - if (rxlvl == 0) { - /* RX fifo is empty */ - return; - } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { - dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); - /* Ensure sanity of RX level */ - rxlvl = MAX3107_RX_FIFO_SIZE; - } - if ((s->rxbuf == 0) || (s->rxstr == 0)) { - dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); - return; - } - buf = s->rxbuf; - valid_str = s->rxstr; - while (rxlvl) { - pr_debug("rxlvl %d\n", rxlvl); - /* Clear buffer */ - memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); - len = 0; - if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { - /* First disable RX FIFO interrupt */ - pr_debug("Disabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - len++; - } - /* Just increase the length by amount of words in FIFO since - * buffer was zeroed and SPI transfer of 0x0000 means reading - * from RX FIFO - */ - len += rxlvl; - /* Append RX level query */ - buf[len] = MAX3107_RXFIFOLVL_REG; - len++; - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { - dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); - return; - } - - /* Skip RX FIFO interrupt disabling word if it was added */ - j = ((len - 1) - rxlvl); - /* Read received words */ - for (i = 0; i < rxlvl; i++, j++) - valid_str[i] = (u8)buf[j]; - put_data_to_circ_buf(s, valid_str, rxlvl); - /* Get new RX level */ - rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); - } - - if (s->rx_enabled) { - /* RX still enabled, re-enable RX FIFO interrupt */ - pr_debug("Enabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); - } - - /* Push the received data to receivers */ - if (s->port.state->port.tty) - tty_flip_buffer_push(s->port.state->port.tty); -} - - -/* Handle data sending */ -static void max3107_handletx(struct max3107_port *s) -{ - struct circ_buf *xmit = &s->port.state->xmit; - int i; - unsigned long flags; - int len; /* SPI transfer buffer length */ - u16 *buf; - - if (!s->tx_fifo_empty) - /* Don't send more data before previous data is sent */ - return; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) - /* No data to send or TX is stopped */ - return; - - if (!s->txbuf) { - dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); - return; - } - buf = s->txbuf; - /* Get length of data pending in circular buffer */ - len = uart_circ_chars_pending(xmit); - if (len) { - /* Limit to size of TX FIFO */ - if (len > MAX3107_TX_FIFO_SIZE) - len = MAX3107_TX_FIFO_SIZE; - - pr_debug("txlen %d\n", len); - - /* Update TX counter */ - s->port.icount.tx += len; - - /* TX FIFO will no longer be empty */ - s->tx_fifo_empty = 0; - - i = 0; - if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { - /* First disable TX empty interrupt */ - pr_debug("Disabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - /* Add data to send */ - spin_lock_irqsave(&s->port.lock, flags); - for ( ; i < len ; i++) { - buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); - buf[i] |= ((u16)xmit->buf[xmit->tail] & - MAX3107_SPI_TX_DATA_MASK); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } - spin_unlock_irqrestore(&s->port.lock, flags); - if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { - /* Enable TX empty interrupt */ - pr_debug("Enabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - if (!s->tx_enabled) { - /* Enable TX */ - pr_debug("Enable TX\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; - buf[i] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - s->tx_enabled = 1; - i++; - len++; - } - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { - dev_err(&s->spi->dev, - "SPI transfer TX handling failed\n"); - return; - } - } - - /* Indicate wake up if circular buffer is getting low on data */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - -} - -/* Handle interrupts - * Also reads and returns current RX FIFO level - */ -static u16 handle_interrupt(struct max3107_port *s) -{ - u16 buf[4]; /* Buffer for SPI transfers */ - u8 irq_status; - u16 rx_level; - unsigned long flags; - - /* Read IRQ status register */ - buf[0] = MAX3107_IRQSTS_REG; - /* Read status IRQ status register */ - buf[1] = MAX3107_STS_IRQSTS_REG; - /* Read LSR IRQ status register */ - buf[2] = MAX3107_LSR_IRQSTS_REG; - /* Query RX level */ - buf[3] = MAX3107_RXFIFOLVL_REG; - - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { - dev_err(&s->spi->dev, - "SPI transfer for INTR handling failed\n"); - return 0; - } - - irq_status = (u8)buf[0]; - pr_debug("IRQSTS %x\n", irq_status); - rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); - - if (irq_status & MAX3107_IRQ_LSR_BIT) { - /* LSR interrupt */ - if (buf[2] & MAX3107_LSR_RXTO_BIT) - /* RX timeout interrupt, - * handled by normal RX handling - */ - pr_debug("RX TO INT\n"); - } - - if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { - /* Tx empty interrupt, - * disable TX and set tx_fifo_empty flag - */ - pr_debug("TE INT, disabling TX\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); - s->tx_enabled = 0; - s->tx_fifo_empty = 1; - } - - if (irq_status & MAX3107_IRQ_RXFIFO_BIT) - /* RX FIFO interrupt, - * handled by normal RX handling - */ - pr_debug("RFIFO INT\n"); - - /* Return RX level */ - return rx_level; -} - -/* Trigger work thread*/ -static void max3107_dowork(struct max3107_port *s) -{ - if (!work_pending(&s->work) && !freezing(current) && !s->suspended) - queue_work(s->workqueue, &s->work); - else - dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); -} - -/* Work thread */ -static void max3107_work(struct work_struct *w) -{ - struct max3107_port *s = container_of(w, struct max3107_port, work); - u16 rxlvl = 0; - int len; /* SPI transfer buffer length */ - u16 buf[5]; /* Buffer for SPI transfers */ - unsigned long flags; - - /* Start by reading current RX FIFO level */ - buf[0] = MAX3107_RXFIFOLVL_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); - rxlvl = 0; - } else { - rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); - } - - do { - pr_debug("rxlvl %d\n", rxlvl); - - /* Handle RX */ - max3107_handlerx(s, rxlvl); - rxlvl = 0; - - if (s->handle_irq) { - /* Handle pending interrupts - * We also get new RX FIFO level since new data may - * have been received while pushing received data to - * receivers - */ - s->handle_irq = 0; - rxlvl = handle_interrupt(s); - } - - /* Handle TX */ - max3107_handletx(s); - - /* Handle configuration changes */ - len = 0; - spin_lock_irqsave(&s->data_lock, flags); - if (s->mode1_commit) { - pr_debug("mode1_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - buf[len++] |= s->mode1_reg; - s->mode1_commit = 0; - } - if (s->lcr_commit) { - pr_debug("lcr_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); - buf[len++] |= s->lcr_reg; - s->lcr_commit = 0; - } - if (s->brg_commit) { - pr_debug("brg_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); - buf[len++] |= ((s->brg_cfg >> 16) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); - buf[len++] |= ((s->brg_cfg >> 8) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); - buf[len++] |= ((s->brg_cfg) & 0xff); - s->brg_commit = 0; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - if (len > 0) { - if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) - dev_err(&s->spi->dev, - "SPI transfer config failed\n"); - } - - /* Reloop if interrupt handling indicated data in RX FIFO */ - } while (rxlvl); - -} - -/* Set sleep mode */ -static void max3107_set_sleep(struct max3107_port *s, int mode) -{ - u16 buf[1]; /* Buffer for SPI transfer */ - unsigned long flags; - pr_debug("enter, mode %d\n", mode); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - switch (mode) { - case MAX3107_DISABLE_FORCED_SLEEP: - s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_ENABLE_FORCED_SLEEP: - s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_DISABLE_AUTOSLEEP: - s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; - break; - case MAX3107_ENABLE_AUTOSLEEP: - s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; - break; - default: - spin_unlock_irqrestore(&s->data_lock, flags); - dev_warn(&s->spi->dev, "invalid sleep mode\n"); - return; - } - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); - - if (mode == MAX3107_DISABLE_AUTOSLEEP || - mode == MAX3107_DISABLE_FORCED_SLEEP) - msleep(MAX3107_WAKEUP_DELAY); -} - -/* Perform full register initialization */ -static void max3107_register_init(struct max3107_port *s) -{ - u16 buf[11]; /* Buffer for SPI transfers */ - - /* 1. Configure baud rate, 9600 as default */ - s->baud = 9600; - /* the below is default*/ - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG26_B9600; - s->baud_tbl = (struct baud_table *)brg26_ext; - } else { - s->brg_cfg = MAX3107_BRG13_IB9600; - s->baud_tbl = (struct baud_table *)brg13_int; - } - - if (s->pdata->init) - s->pdata->init(s); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) - | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); - buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) - | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); - buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) - | ((s->brg_cfg) & 0xff); - - /* 2. Configure LCR register, 8N1 mode by default */ - s->lcr_reg = MAX3107_LCR_WORD_LEN_8; - buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) - | s->lcr_reg; - - /* 3. Configure MODE 1 register */ - s->mode1_reg = 0; - /* Enable IRQ pin */ - s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; - /* Disable TX */ - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - s->tx_enabled = 0; - /* RX is enabled */ - s->rx_enabled = 1; - buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) - | s->mode1_reg; - - /* 4. Configure MODE 2 register */ - buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Enable loopback */ - buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; - } - /* Reset FIFOs */ - buf[5] |= MAX3107_MODE2_FIFORST_BIT; - s->tx_fifo_empty = 1; - - /* 5. Configure FIFO trigger level register */ - buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); - /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ - buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); - - /* 6. Configure flow control levels */ - buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); - /* Flow control halt level 96, resume level 48 */ - buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); - - /* 7. Configure flow control */ - buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); - /* Enable auto CTS and auto RTS flow control */ - buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); - - /* 8. Configure RX timeout register */ - buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); - /* Timeout after 48 character intervals */ - buf[9] |= 0x0030; - - /* 9. Configure LSR interrupt enable register */ - buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); - /* Enable RX timeout interrupt */ - buf[10] |= MAX3107_LSR_RXTO_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 22)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - - /* 10. Clear IRQ status register by reading it */ - buf[0] = MAX3107_IRQSTS_REG; - - /* 11. Configure interrupt enable register */ - /* Enable LSR interrupt */ - s->irqen_reg = MAX3107_IRQ_LSR_BIT; - /* Enable RX FIFO interrupt */ - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) - | s->irqen_reg; - - /* 12. Clear FIFO reset that was set in step 6 */ - buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Keep loopback enabled */ - buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; - } - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - -} - -/* IRQ handler */ -static irqreturn_t max3107_irq(int irqno, void *dev_id) -{ - struct max3107_port *s = dev_id; - - if (irqno != s->spi->irq) { - /* Unexpected IRQ */ - return IRQ_NONE; - } - - /* Indicate irq */ - s->handle_irq = 1; - - /* Trigger work thread */ - max3107_dowork(s); - - return IRQ_HANDLED; -} - -/* HW suspension function - * - * Currently autosleep is used to decrease current consumption, alternative - * approach would be to set the chip to reset mode if UART is not being - * used but that would mess the GPIOs - * - */ -void max3107_hw_susp(struct max3107_port *s, int suspend) -{ - pr_debug("enter, suspend %d\n", suspend); - - if (suspend) { - /* Suspend requested, - * enable autosleep to decrease current consumption - */ - s->suspended = 1; - max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); - } else { - /* Resume requested, - * disable autosleep - */ - s->suspended = 0; - max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); - } -} -EXPORT_SYMBOL_GPL(max3107_hw_susp); - -/* Modem status IRQ enabling */ -static void max3107_enable_ms(struct uart_port *port) -{ - /* Modem status not supported */ -} - -/* Data send function */ -static void max3107_start_tx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Trigger work thread for sending data */ - max3107_dowork(s); -} - -/* Function for checking that there is no pending transfers */ -static unsigned int max3107_tx_empty(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - pr_debug("returning %d\n", - (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); - return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); -} - -/* Function for stopping RX */ -static void max3107_stop_rx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - unsigned long flags; - - /* Set RX disabled in MODE 1 register */ - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; - s->mode1_commit = 1; - spin_unlock_irqrestore(&s->data_lock, flags); - /* Set RX disabled */ - s->rx_enabled = 0; - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Function for returning control pin states */ -static unsigned int max3107_get_mctrl(struct uart_port *port) -{ - /* DCD and DSR are not wired and CTS/RTS is handled automatically - * so just indicate DSR and CAR asserted - */ - return TIOCM_DSR | TIOCM_CAR; -} - -/* Function for setting control pin states */ -static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* DCD and DSR are not wired and CTS/RTS is hadnled automatically - * so do nothing - */ -} - -/* Function for configuring UART parameters */ -static void max3107_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - struct tty_struct *tty; - int baud; - u16 new_lcr = 0; - u32 new_brg = 0; - unsigned long flags; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Get new LCR register values */ - /* Word size */ - if ((termios->c_cflag & CSIZE) == CS7) - new_lcr |= MAX3107_LCR_WORD_LEN_7; - else - new_lcr |= MAX3107_LCR_WORD_LEN_8; - - /* Parity */ - if (termios->c_cflag & PARENB) { - new_lcr |= MAX3107_LCR_PARITY_BIT; - if (!(termios->c_cflag & PARODD)) - new_lcr |= MAX3107_LCR_EVENPARITY_BIT; - } - - /* Stop bits */ - if (termios->c_cflag & CSTOPB) { - /* 2 stop bits */ - new_lcr |= MAX3107_LCR_STOPLEN_BIT; - } - - /* Mask termios capabilities we don't support */ - termios->c_cflag &= ~CMSPAR; - - /* Set status ignore mask */ - s->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; - - /* Set low latency to immediately handle pushed data */ - s->port.state->port.tty->low_latency = 1; - - /* Get new baud rate generator configuration */ - baud = tty_get_baud_rate(tty); - - spin_lock_irqsave(&s->data_lock, flags); - new_brg = get_new_brg(baud, s); - /* if can't find the corrent config, use previous */ - if (!new_brg) { - baud = s->baud; - new_brg = s->brg_cfg; - } - spin_unlock_irqrestore(&s->data_lock, flags); - tty_termios_encode_baud_rate(termios, baud, baud); - s->baud = baud; - - /* Update timeout according to new baud rate */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_lock_irqsave(&s->data_lock, flags); - if (s->lcr_reg != new_lcr) { - s->lcr_reg = new_lcr; - s->lcr_commit = 1; - } - if (s->brg_cfg != new_brg) { - s->brg_cfg = new_brg; - s->brg_commit = 1; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Port shutdown function */ -static void max3107_shutdown(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - if (s->suspended && s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Free the interrupt */ - free_irq(s->spi->irq, s); - - if (s->workqueue) { - /* Flush and destroy work queue */ - flush_workqueue(s->workqueue); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - } - - /* Suspend HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -} - -/* Port startup function */ -static int max3107_startup(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Initialize work queue */ - s->workqueue = create_freezeable_workqueue("max3107"); - if (!s->workqueue) { - dev_err(&s->spi->dev, "Workqueue creation failed\n"); - return -EBUSY; - } - INIT_WORK(&s->work, max3107_work); - - /* Setup IRQ */ - if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, - "max3107", s)) { - dev_err(&s->spi->dev, "IRQ reguest failed\n"); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - return -EBUSY; - } - - /* Resume HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Init registers */ - max3107_register_init(s); - - return 0; -} - -/* Port type function */ -static const char *max3107_type(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - return s->spi->modalias; -} - -/* Port release function */ -static void max3107_release_port(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port request function */ -static int max3107_request_port(struct uart_port *port) -{ - /* Do nothing */ - return 0; -} - -/* Port config function */ -static void max3107_config_port(struct uart_port *port, int flags) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - s->port.type = PORT_MAX3107; -} - -/* Port verify function */ -static int max3107_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) - return 0; - - return -EINVAL; -} - -/* Port stop TX function */ -static void max3107_stop_tx(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port break control function */ -static void max3107_break_ctl(struct uart_port *port, int break_state) -{ - /* We don't support break control, do nothing */ -} - - -/* Port functions */ -static struct uart_ops max3107_ops = { - .tx_empty = max3107_tx_empty, - .set_mctrl = max3107_set_mctrl, - .get_mctrl = max3107_get_mctrl, - .stop_tx = max3107_stop_tx, - .start_tx = max3107_start_tx, - .stop_rx = max3107_stop_rx, - .enable_ms = max3107_enable_ms, - .break_ctl = max3107_break_ctl, - .startup = max3107_startup, - .shutdown = max3107_shutdown, - .set_termios = max3107_set_termios, - .type = max3107_type, - .release_port = max3107_release_port, - .request_port = max3107_request_port, - .config_port = max3107_config_port, - .verify_port = max3107_verify_port, -}; - -/* UART driver data */ -static struct uart_driver max3107_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyMAX", - .dev_name = "ttyMAX", - .nr = 1, -}; - -static int driver_registered = 0; - - - -/* 'Generic' platform data */ -static struct max3107_plat generic_plat_data = { - .loopback = 0, - .ext_clk = 1, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -/*******************************************************************/ - -/** - * max3107_probe - SPI bus probe entry point - * @spi: the spi device - * - * SPI wants us to probe this device and if appropriate claim it. - * Perform any platform specific requirements and then initialise - * the device. - */ - -int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) -{ - struct max3107_port *s; - u16 buf[2]; /* Buffer for SPI transfers */ - int retval; - - pr_info("enter max3107 probe\n"); - - /* Allocate port structure */ - s = kzalloc(sizeof(*s), GFP_KERNEL); - if (!s) { - pr_err("Allocating port structure failed\n"); - return -ENOMEM; - } - - s->pdata = pdata; - - /* SPI Rx buffer - * +2 for RX FIFO interrupt - * disabling and RX level query - */ - s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); - if (!s->rxbuf) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free4; - } - s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); - if (!s->rxstr) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free3; - } - /* SPI Tx buffer - * SPI transfer buffer - * +3 for TX FIFO empty - * interrupt disabling and - * enabling and TX enabling - */ - s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); - if (!s->txbuf) { - pr_err("Allocating TX buffer failed\n"); - retval = -ENOMEM; - goto err_free2; - } - /* Initialize shared data lock */ - spin_lock_init(&s->data_lock); - - /* SPI intializations */ - dev_set_drvdata(&spi->dev, s); - spi->mode = SPI_MODE_0; - spi->dev.platform_data = pdata; - spi->bits_per_word = 16; - s->ext_clk = pdata->ext_clk; - s->loopback = pdata->loopback; - spi_setup(spi); - s->spi = spi; - - /* Check REV ID to ensure we are talking to what we expect */ - buf[0] = MAX3107_REVID_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); - retval = -EIO; - goto err_free1; - } - if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && - (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { - dev_err(&s->spi->dev, "REVID %x does not match\n", - (buf[0] & MAX3107_SPI_RX_DATA_MASK)); - retval = -ENODEV; - goto err_free1; - } - - /* Disable all interrupts */ - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); - buf[0] |= 0x0000; - - /* Configure clock source */ - buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); - if (s->ext_clk) { - /* External clock */ - buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; - } - - /* PLL bypass ON */ - buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - retval = -EIO; - goto err_free1; - } - - /* Register UART driver */ - if (!driver_registered) { - retval = uart_register_driver(&max3107_uart_driver); - if (retval) { - dev_err(&s->spi->dev, "Registering UART driver failed\n"); - goto err_free1; - } - driver_registered = 1; - } - - /* Initialize UART port data */ - s->port.fifosize = 128; - s->port.ops = &max3107_ops; - s->port.line = 0; - s->port.dev = &spi->dev; - s->port.uartclk = 9600; - s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - s->port.irq = s->spi->irq; - s->port.type = PORT_MAX3107; - - /* Add UART port */ - retval = uart_add_one_port(&max3107_uart_driver, &s->port); - if (retval < 0) { - dev_err(&s->spi->dev, "Adding UART port failed\n"); - goto err_free1; - } - - if (pdata->configure) { - retval = pdata->configure(s); - if (retval < 0) - goto err_free1; - } - - /* Go to suspend mode */ - if (pdata->hw_suspend) - pdata->hw_suspend(s, 1); - - return 0; - -err_free1: - kfree(s->txbuf); -err_free2: - kfree(s->rxstr); -err_free3: - kfree(s->rxbuf); -err_free4: - kfree(s); - return retval; -} -EXPORT_SYMBOL_GPL(max3107_probe); - -/* Driver remove function */ -int max3107_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_info("enter max3107 remove\n"); - - /* Remove port */ - if (uart_remove_one_port(&max3107_uart_driver, &s->port)) - dev_warn(&s->spi->dev, "Removing UART port failed\n"); - - - /* Free TxRx buffer */ - kfree(s->rxbuf); - kfree(s->rxstr); - kfree(s->txbuf); - - /* Free port structure */ - kfree(s); - - return 0; -} -EXPORT_SYMBOL_GPL(max3107_remove); - -/* Driver suspend function */ -int max3107_suspend(struct spi_device *spi, pm_message_t state) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter suspend\n"); - - /* Suspend UART port */ - uart_suspend_port(&max3107_uart_driver, &s->port); - - /* Go to suspend mode */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_suspend); - -/* Driver resume function */ -int max3107_resume(struct spi_device *spi) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter resume\n"); - - /* Resume from suspend */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Resume UART port */ - uart_resume_port(&max3107_uart_driver, &s->port); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_resume); - -static int max3107_probe_generic(struct spi_device *spi) -{ - return max3107_probe(spi, &generic_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "max3107", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = max3107_probe_generic, - .remove = __devexit_p(max3107_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - pr_info("enter max3107 init\n"); - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - pr_info("enter max3107 exit\n"); - /* Unregister UART driver */ - if (driver_registered) - uart_unregister_driver(&max3107_uart_driver); - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h deleted file mode 100644 index 7ab63239..0000000 --- a/drivers/serial/max3107.h +++ /dev/null @@ -1,441 +0,0 @@ -/* - * max3107.h - spi uart protocol driver header for Maxim 3107 - * - * Copyright (C) Aavamobile 2009 - * Based on serial_max3100.h by Christian Pellegrin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _MAX3107_H -#define _MAX3107_H - -/* Serial error status definitions */ -#define MAX3107_PARITY_ERROR 1 -#define MAX3107_FRAME_ERROR 2 -#define MAX3107_OVERRUN_ERROR 4 -#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ - MAX3107_FRAME_ERROR | \ - MAX3107_OVERRUN_ERROR) - -/* GPIO definitions */ -#define MAX3107_GPIO_BASE 88 -#define MAX3107_GPIO_COUNT 4 - - -/* GPIO connected to chip's reset pin */ -#define MAX3107_RESET_GPIO 87 - - -/* Chip reset delay */ -#define MAX3107_RESET_DELAY 10 - -/* Chip wakeup delay */ -#define MAX3107_WAKEUP_DELAY 50 - - -/* Sleep mode definitions */ -#define MAX3107_DISABLE_FORCED_SLEEP 0 -#define MAX3107_ENABLE_FORCED_SLEEP 1 -#define MAX3107_DISABLE_AUTOSLEEP 2 -#define MAX3107_ENABLE_AUTOSLEEP 3 - - -/* Definitions for register access with SPI transfers - * - * SPI transfer format: - * - * Master to slave bits xzzzzzzzyyyyyyyy - * Slave to master bits aaaaaaaabbbbbbbb - * - * where: - * x = 0 for reads, 1 for writes - * z = register address - * y = new register value if write, 0 if read - * a = unspecified - * b = register value if read, unspecified if write - */ - -/* SPI speed */ -#define MAX3107_SPI_SPEED (3125000 * 2) - -/* Write bit */ -#define MAX3107_WRITE_BIT (1 << 15) - -/* SPI TX data mask */ -#define MAX3107_SPI_RX_DATA_MASK (0x00ff) - -/* SPI RX data mask */ -#define MAX3107_SPI_TX_DATA_MASK (0x00ff) - -/* Register access masks */ -#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ -#define MAX3107_THR_REG (0x0000) /* TX FIFO */ -#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ -#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ -#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ -#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ -#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ -#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ -#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ -#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ -#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ -#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ -#define MAX3107_LCR_REG (0x0b00) /* LCR */ -#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ -#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ -#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ -#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ -#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ -#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ -#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ -#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ -#define MAX3107_XON1_REG (0x1400) /* XON1 character */ -#define MAX3107_XON2_REG (0x1500) /* XON2 character */ -#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ -#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ -#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ -#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ -#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ -#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ -#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ -#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ -#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ -#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ - -/* IRQ register bits */ -#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ -#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ -#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ -#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ -#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ -#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ -#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ -#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ - -/* LSR register bits */ -#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ -#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ -#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ -#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ -#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ -#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ -#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ - -/* Special character register bits */ -#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ -#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ -#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ -#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ -#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ -#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ -#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Status register bits */ -#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ -#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ -#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ -#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ -#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ -#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ -#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ -#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* MODE1 register bits */ -#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ -#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ -#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ -#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ -#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ -#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ -#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ -#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ - -/* MODE2 register bits */ -#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ -#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ -#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ -#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ -#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ -#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ -#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ -#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ - -/* LCR register bits */ -#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ -#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 - * - * Word length bits table: - * 00 -> 5 bit words - * 01 -> 6 bit words - * 10 -> 7 bit words - * 11 -> 8 bit words - */ -#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit - * - * STOP length bit table: - * 0 -> 1 stop bit - * 1 -> 1-1.5 stop bits if - * word length is 5, - * 2 stop bits otherwise - */ -#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ -#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ -#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ -#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ -#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ -#define MAX3107_LCR_WORD_LEN_5 (0x0000) -#define MAX3107_LCR_WORD_LEN_6 (0x0001) -#define MAX3107_LCR_WORD_LEN_7 (0x0002) -#define MAX3107_LCR_WORD_LEN_8 (0x0003) - - -/* IRDA register bits */ -#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ -#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ -#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ -#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ -#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ -#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ -#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Flow control trigger level register masks */ -#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ -#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ -#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) -#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) - -/* FIFO interrupt trigger level register masks */ -#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) -#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) - -/* Flow control register bits */ -#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs - * are used in conjunction with - * XOFF2 for definition of - * special character */ -#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ -#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ -#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 - * - * SWFLOW bits 1 & 0 table: - * 00 -> no transmitter flow - * control - * 01 -> receiver compares - * XON2 and XOFF2 - * and controls - * transmitter - * 10 -> receiver compares - * XON1 and XOFF1 - * and controls - * transmitter - * 11 -> receiver compares - * XON1, XON2, XOFF1 and - * XOFF2 and controls - * transmitter - */ -#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ -#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 - * - * SWFLOW bits 3 & 2 table: - * 00 -> no received flow - * control - * 01 -> transmitter generates - * XON2 and XOFF2 - * 10 -> transmitter generates - * XON1 and XOFF1 - * 11 -> transmitter generates - * XON1, XON2, XOFF1 and - * XOFF2 - */ - -/* GPIO configuration register bits */ -#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ -#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ -#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ -#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ -#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ -#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ -#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ -#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ - -/* GPIO DATA register bits */ -#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ -#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ -#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ -#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ -#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ -#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ -#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ -#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ - -/* PLL configuration register masks */ -#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ -#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ - -/* Baud rate generator configuration register masks and bits */ -#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of - * Baud rate generator divisor - */ -#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ -#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ -#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Clock source register bits */ -#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ -#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ -#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ -#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ -#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ -#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ -#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ - - -/* HW definitions */ -#define MAX3107_RX_FIFO_SIZE 128 -#define MAX3107_TX_FIFO_SIZE 128 -#define MAX3107_REVID1 0x00a0 -#define MAX3107_REVID2 0x00a1 - - -/* Baud rate generator configuration values for external clock 13MHz */ -#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) -#define MAX3107_BRG13_B600 (0x054A00 | 0x03) -#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) -#define MAX3107_BRG13_B2400 (0x015200 | 0x09) -#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) -#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) -#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) -#define MAX3107_BRG13_B38400 (0x001500 | 0x03) -#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) -#define MAX3107_BRG13_B115200 (0x000700 | 0x01) -#define MAX3107_BRG13_B230400 (0x000300 | 0x08) -#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) -#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) - -/* Baud rate generator configuration values for external clock 26MHz */ -#define MAX3107_BRG26_B300 (0x152800 | 0x0A) -#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) -#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) -#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) -#define MAX3107_BRG26_B4800 (0x015200 | 0x09) -#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) -#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) -#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) -#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) -#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) -#define MAX3107_BRG26_B230400 (0x000700 | 0x01) -#define MAX3107_BRG26_B460800 (0x000300 | 0x08) -#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) - -/* Baud rate generator configuration values for internal clock */ -#define MAX3107_BRG13_IB300 (0x008000 | 0x00) -#define MAX3107_BRG13_IB600 (0x004000 | 0x00) -#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) -#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) -#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) -#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) -#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) -#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) -#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) -#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) -#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) -#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) -#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) - - -struct baud_table { - int baud; - u32 new_brg; -}; - -struct max3107_port { - /* UART port structure */ - struct uart_port port; - - /* SPI device structure */ - struct spi_device *spi; - -#if defined(CONFIG_GPIOLIB) - /* GPIO chip stucture */ - struct gpio_chip chip; -#endif - - /* Workqueue that does all the magic */ - struct workqueue_struct *workqueue; - struct work_struct work; - - /* Lock for shared data */ - spinlock_t data_lock; - - /* Device configuration */ - int ext_clk; /* 1 if external clock used */ - int loopback; /* Current loopback mode state */ - int baud; /* Current baud rate */ - - /* State flags */ - int suspended; /* Indicates suspend mode */ - int tx_fifo_empty; /* Flag for TX FIFO state */ - int rx_enabled; /* Flag for receiver state */ - int tx_enabled; /* Flag for transmitter state */ - - u16 irqen_reg; /* Current IRQ enable register value */ - /* Shared data */ - u16 mode1_reg; /* Current mode1 register value*/ - int mode1_commit; /* Flag for setting new mode1 register value */ - u16 lcr_reg; /* Current LCR register value */ - int lcr_commit; /* Flag for setting new LCR register value */ - u32 brg_cfg; /* Current Baud rate generator config */ - int brg_commit; /* Flag for setting new baud rate generator - * config - */ - struct baud_table *baud_tbl; - int handle_irq; /* Indicates that IRQ should be handled */ - - /* Rx buffer and str*/ - u16 *rxbuf; - u8 *rxstr; - /* Tx buffer*/ - u16 *txbuf; - - struct max3107_plat *pdata; /* Platform data */ -}; - -/* Platform data structure */ -struct max3107_plat { - /* Loopback mode enable */ - int loopback; - /* External clock enable */ - int ext_clk; - /* Called during the register initialisation */ - void (*init)(struct max3107_port *s); - /* Called when the port is found and configured */ - int (*configure)(struct max3107_port *s); - /* HW suspend function */ - void (*hw_suspend) (struct max3107_port *s, int suspend); - /* Polling mode enable */ - int polled_mode; - /* Polling period if polling mode enabled */ - int poll_time; -}; - -extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); -extern void max3107_hw_susp(struct max3107_port *s, int suspend); -extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); -extern int max3107_remove(struct spi_device *spi); -extern int max3107_suspend(struct spi_device *spi, pm_message_t state); -extern int max3107_resume(struct spi_device *spi); - -#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c deleted file mode 100644 index 3394b7c..0000000 --- a/drivers/serial/mcf.c +++ /dev/null @@ -1,662 +0,0 @@ -/****************************************************************************/ - -/* - * mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/****************************************************************************/ - -/* - * Some boards implement the DTR/DCD lines using GPIO lines, most - * don't. Dummy out the access macros for those that don't. Those - * that do should define these macros somewhere in there board - * specific inlude files. - */ -#if !defined(mcf_getppdcd) -#define mcf_getppdcd(p) (1) -#endif -#if !defined(mcf_getppdtr) -#define mcf_getppdtr(p) (1) -#endif -#if !defined(mcf_setppdtr) -#define mcf_setppdtr(p, v) do { } while (0) -#endif - -/****************************************************************************/ - -/* - * Local per-uart structure. - */ -struct mcf_uart { - struct uart_port port; - unsigned int sigs; /* Local copy of line sigs */ - unsigned char imr; /* Local IMR mirror */ -}; - -/****************************************************************************/ - -static unsigned int mcf_tx_empty(struct uart_port *port) -{ - return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? - TIOCSER_TEMT : 0; -} - -/****************************************************************************/ - -static unsigned int mcf_get_mctrl(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned int sigs; - - sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? - 0 : TIOCM_CTS; - sigs |= (pp->sigs & TIOCM_RTS); - sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); - sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); - - return sigs; -} - -/****************************************************************************/ - -static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->sigs = sigs; - mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); - if (sigs & TIOCM_RTS) - writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); - else - writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); -} - -/****************************************************************************/ - -static void mcf_start_tx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr |= MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_stop_tx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_stop_rx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr &= ~MCFUART_UIR_RXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); - else - writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_enable_ms(struct uart_port *port) -{ -} - -/****************************************************************************/ - -static int mcf_startup(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Reset UART, get it into known state... */ - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - - /* Enable the UART transmitter and receiver */ - writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, - port->membase + MCFUART_UCR); - - /* Enable RX interrupts now */ - pp->imr = MCFUART_UIR_RXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -/****************************************************************************/ - -static void mcf_shutdown(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writeb(pp->imr, port->membase + MCFUART_UIMR); - - /* Disable UART transmitter and receiver */ - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, baudclk; -#if defined(CONFIG_M5272) - unsigned int baudfr; -#endif - unsigned char mr1, mr2; - - baud = uart_get_baud_rate(port, termios, old, 0, 230400); -#if defined(CONFIG_M5272) - baudclk = (MCF_BUSCLK / baud) / 32; - baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; -#else - baudclk = ((MCF_BUSCLK / baud) + 16) / 32; -#endif - - mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; - mr2 = 0; - - switch (termios->c_cflag & CSIZE) { - case CS5: mr1 |= MCFUART_MR1_CS5; break; - case CS6: mr1 |= MCFUART_MR1_CS6; break; - case CS7: mr1 |= MCFUART_MR1_CS7; break; - case CS8: - default: mr1 |= MCFUART_MR1_CS8; break; - } - - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYMARK; - else - mr1 |= MCFUART_MR1_PARITYSPACE; - } else { - if (termios->c_cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYODD; - else - mr1 |= MCFUART_MR1_PARITYEVEN; - } - } else { - mr1 |= MCFUART_MR1_PARITYNONE; - } - - if (termios->c_cflag & CSTOPB) - mr2 |= MCFUART_MR2_STOP2; - else - mr2 |= MCFUART_MR2_STOP1; - - if (termios->c_cflag & CRTSCTS) { - mr1 |= MCFUART_MR1_RXRTS; - mr2 |= MCFUART_MR2_TXCTS; - } - - spin_lock_irqsave(&port->lock, flags); - uart_update_timeout(port, termios->c_cflag, baud); - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); - writeb(mr1, port->membase + MCFUART_UMR); - writeb(mr2, port->membase + MCFUART_UMR); - writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); - writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); -#if defined(CONFIG_M5272) - writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); -#endif - writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, - port->membase + MCFUART_UCSR); - writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, - port->membase + MCFUART_UCR); - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_rx_chars(struct mcf_uart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char status, ch, flag; - - while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { - ch = readb(port->membase + MCFUART_URB); - flag = TTY_NORMAL; - port->icount.rx++; - - if (status & MCFUART_USR_RXERR) { - writeb(MCFUART_UCR_CMDRESETERR, - port->membase + MCFUART_UCR); - - if (status & MCFUART_USR_RXBREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & MCFUART_USR_RXPARITY) { - port->icount.parity++; - } else if (status & MCFUART_USR_RXOVERRUN) { - port->icount.overrun++; - } else if (status & MCFUART_USR_RXFRAMING) { - port->icount.frame++; - } - - status &= port->read_status_mask; - - if (status & MCFUART_USR_RXBREAK) - flag = TTY_BREAK; - else if (status & MCFUART_USR_RXPARITY) - flag = TTY_PARITY; - else if (status & MCFUART_USR_RXFRAMING) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -/****************************************************************************/ - -static void mcf_tx_chars(struct mcf_uart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - /* Send special char - probably flow control */ - writeb(port->x_char, port->membase + MCFUART_UTB); - port->x_char = 0; - port->icount.tx++; - return; - } - - while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { - if (xmit->head == xmit->tail) - break; - writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (xmit->head == xmit->tail) { - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); - } -} - -/****************************************************************************/ - -static irqreturn_t mcf_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned int isr; - irqreturn_t ret = IRQ_NONE; - - isr = readb(port->membase + MCFUART_UISR) & pp->imr; - - spin_lock(&port->lock); - if (isr & MCFUART_UIR_RXREADY) { - mcf_rx_chars(pp); - ret = IRQ_HANDLED; - } - if (isr & MCFUART_UIR_TXREADY) { - mcf_tx_chars(pp); - ret = IRQ_HANDLED; - } - spin_unlock(&port->lock); - - return ret; -} - -/****************************************************************************/ - -static void mcf_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_MCF; - port->fifosize = MCFUART_TXFIFOSIZE; - - /* Clear mask, so no surprise interrupts. */ - writeb(0, port->membase + MCFUART_UIMR); - - if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port)) - printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " - "interrupt vector=%d\n", port->line, port->irq); -} - -/****************************************************************************/ - -static const char *mcf_type(struct uart_port *port) -{ - return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; -} - -/****************************************************************************/ - -static int mcf_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -/****************************************************************************/ - -static void mcf_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -/****************************************************************************/ - -static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) - return -EINVAL; - return 0; -} - -/****************************************************************************/ - -/* - * Define the basic serial functions we support. - */ -static const struct uart_ops mcf_uart_ops = { - .tx_empty = mcf_tx_empty, - .get_mctrl = mcf_get_mctrl, - .set_mctrl = mcf_set_mctrl, - .start_tx = mcf_start_tx, - .stop_tx = mcf_stop_tx, - .stop_rx = mcf_stop_rx, - .enable_ms = mcf_enable_ms, - .break_ctl = mcf_break_ctl, - .startup = mcf_startup, - .shutdown = mcf_shutdown, - .set_termios = mcf_set_termios, - .type = mcf_type, - .request_port = mcf_request_port, - .release_port = mcf_release_port, - .config_port = mcf_config_port, - .verify_port = mcf_verify_port, -}; - -static struct mcf_uart mcf_ports[4]; - -#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) - -/****************************************************************************/ -#if defined(CONFIG_SERIAL_MCF_CONSOLE) -/****************************************************************************/ - -int __init early_mcf_setup(struct mcf_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { - port = &mcf_ports[i].port; - - port->line = i; - port->type = PORT_MCF; - port->mapbase = platp[i].mapbase; - port->membase = (platp[i].membase) ? platp[i].membase : - (unsigned char __iomem *) port->mapbase; - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = MCF_BUSCLK; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &mcf_uart_ops; - } - - return 0; -} - -/****************************************************************************/ - -static void mcf_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(mcf_ports + co->index)->port; - int i; - - for (i = 0; (i < 0x10000); i++) { - if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) - break; - } - writeb(c, port->membase + MCFUART_UTB); - for (i = 0; (i < 0x10000); i++) { - if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) - break; - } -} - -/****************************************************************************/ - -static void mcf_console_write(struct console *co, const char *s, unsigned int count) -{ - for (; (count); count--, s++) { - mcf_console_putc(co, *s); - if (*s == '\n') - mcf_console_putc(co, '\r'); - } -} - -/****************************************************************************/ - -static int __init mcf_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = CONFIG_SERIAL_MCF_BAUDRATE; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) - co->index = 0; - port = &mcf_ports[co->index].port; - if (port->membase == 0) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -/****************************************************************************/ - -static struct uart_driver mcf_driver; - -static struct console mcf_console = { - .name = "ttyS", - .write = mcf_console_write, - .device = uart_console_device, - .setup = mcf_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &mcf_driver, -}; - -static int __init mcf_console_init(void) -{ - register_console(&mcf_console); - return 0; -} - -console_initcall(mcf_console_init); - -#define MCF_CONSOLE &mcf_console - -/****************************************************************************/ -#else -/****************************************************************************/ - -#define MCF_CONSOLE NULL - -/****************************************************************************/ -#endif /* CONFIG_MCF_CONSOLE */ -/****************************************************************************/ - -/* - * Define the mcf UART driver structure. - */ -static struct uart_driver mcf_driver = { - .owner = THIS_MODULE, - .driver_name = "mcf", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = MCF_MAXPORTS, - .cons = MCF_CONSOLE, -}; - -/****************************************************************************/ - -static int __devinit mcf_probe(struct platform_device *pdev) -{ - struct mcf_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - int i; - - for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { - port = &mcf_ports[i].port; - - port->line = i; - port->type = PORT_MCF; - port->mapbase = platp[i].mapbase; - port->membase = (platp[i].membase) ? platp[i].membase : - (unsigned char __iomem *) platp[i].mapbase; - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = MCF_BUSCLK; - port->ops = &mcf_uart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; - - uart_add_one_port(&mcf_driver, port); - } - - return 0; -} - -/****************************************************************************/ - -static int __devexit mcf_remove(struct platform_device *pdev) -{ - struct uart_port *port; - int i; - - for (i = 0; (i < MCF_MAXPORTS); i++) { - port = &mcf_ports[i].port; - if (port) - uart_remove_one_port(&mcf_driver, port); - } - - return 0; -} - -/****************************************************************************/ - -static struct platform_driver mcf_platform_driver = { - .probe = mcf_probe, - .remove = __devexit_p(mcf_remove), - .driver = { - .name = "mcfuart", - .owner = THIS_MODULE, - }, -}; - -/****************************************************************************/ - -static int __init mcf_init(void) -{ - int rc; - - printk("ColdFire internal UART serial driver\n"); - - rc = uart_register_driver(&mcf_driver); - if (rc) - return rc; - rc = platform_driver_register(&mcf_platform_driver); - if (rc) - return rc; - return 0; -} - -/****************************************************************************/ - -static void __exit mcf_exit(void) -{ - platform_driver_unregister(&mcf_platform_driver); - uart_unregister_driver(&mcf_driver); -} - -/****************************************************************************/ - -module_init(mcf_init); -module_exit(mcf_exit); - -MODULE_AUTHOR("Greg Ungerer "); -MODULE_DESCRIPTION("Freescale ColdFire UART driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mcfuart"); - -/****************************************************************************/ diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c deleted file mode 100644 index d40010a..0000000 --- a/drivers/serial/mfd.c +++ /dev/null @@ -1,1513 +0,0 @@ -/* - * mfd.c: driver for High Speed UART device of Intel Medfield platform - * - * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ - * - * (C) Copyright 2010 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* Notes: - * 1. DMA channel allocation: 0/1 channel are assigned to port 0, - * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans - * are used for RX, odd chans for TX - * - * 2. In A0 stepping, UART will not support TX half empty flag - * - * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always - * asserted, only when the HW is reset the DDCD and DDSR will - * be triggered - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MFD_HSU_A0_STEPPING 1 - -#define HSU_DMA_BUF_SIZE 2048 - -#define chan_readl(chan, offset) readl(chan->reg + offset) -#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) - -#define mfd_readl(obj, offset) readl(obj->reg + offset) -#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) - -#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) - -struct hsu_dma_buffer { - u8 *buf; - dma_addr_t dma_addr; - u32 dma_size; - u32 ofs; -}; - -struct hsu_dma_chan { - u32 id; - enum dma_data_direction dirt; - struct uart_hsu_port *uport; - void __iomem *reg; - struct timer_list rx_timer; /* only needed by RX channel */ -}; - -struct uart_hsu_port { - struct uart_port port; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; - char name[12]; - int index; - struct device *dev; - - struct hsu_dma_chan *txc; - struct hsu_dma_chan *rxc; - struct hsu_dma_buffer txbuf; - struct hsu_dma_buffer rxbuf; - int use_dma; /* flag for DMA/PIO */ - int running; - int dma_tx_on; -}; - -/* Top level data structure of HSU */ -struct hsu_port { - void __iomem *reg; - unsigned long paddr; - unsigned long iolen; - u32 irq; - - struct uart_hsu_port port[3]; - struct hsu_dma_chan chans[10]; - - struct dentry *debugfs; -}; - -static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) -{ - unsigned int val; - - if (offset > UART_MSR) { - offset <<= 2; - val = readl(up->port.membase + offset); - } else - val = (unsigned int)readb(up->port.membase + offset); - - return val; -} - -static inline void serial_out(struct uart_hsu_port *up, int offset, int value) -{ - if (offset > UART_MSR) { - offset <<= 2; - writel(value, up->port.membase + offset); - } else { - unsigned char val = value & 0xff; - writeb(val, up->port.membase + offset); - } -} - -#ifdef CONFIG_DEBUG_FS - -#define HSU_REGS_BUFSIZE 1024 - -static int hsu_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -static ssize_t port_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct uart_hsu_port *up = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU port[%d] regs:\n", up->index); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static ssize_t dma_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct hsu_dma_chan *chan = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU DMA channel [%d] regs:\n", chan->id); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static const struct file_operations port_regs_ops = { - .owner = THIS_MODULE, - .open = hsu_show_regs_open, - .read = port_show_regs, - .llseek = default_llseek, -}; - -static const struct file_operations dma_regs_ops = { - .owner = THIS_MODULE, - .open = hsu_show_regs_open, - .read = dma_show_regs, - .llseek = default_llseek, -}; - -static int hsu_debugfs_init(struct hsu_port *hsu) -{ - int i; - char name[32]; - - hsu->debugfs = debugfs_create_dir("hsu", NULL); - if (!hsu->debugfs) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - snprintf(name, sizeof(name), "port_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); - } - - for (i = 0; i < 6; i++) { - snprintf(name, sizeof(name), "dma_chan_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); - } - - return 0; -} - -static void hsu_debugfs_remove(struct hsu_port *hsu) -{ - if (hsu->debugfs) - debugfs_remove_recursive(hsu->debugfs); -} - -#else -static inline int hsu_debugfs_init(struct hsu_port *hsu) -{ - return 0; -} - -static inline void hsu_debugfs_remove(struct hsu_port *hsu) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -static void serial_hsu_enable_ms(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -void hsu_dma_tx(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - struct hsu_dma_buffer *dbuf = &up->txbuf; - int count; - - /* test_and_set_bit may be better, but anyway it's in lock protected mode */ - if (up->dma_tx_on) - return; - - /* Update the circ buf info */ - xmit->tail += dbuf->ofs; - xmit->tail &= UART_XMIT_SIZE - 1; - - up->port.icount.tx += dbuf->ofs; - dbuf->ofs = 0; - - /* Disable the channel */ - chan_writel(up->txc, HSU_CH_CR, 0x0); - - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { - dma_sync_single_for_device(up->port.dev, - dbuf->dma_addr, - dbuf->dma_size, - DMA_TO_DEVICE); - - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - dbuf->ofs = count; - - /* Reprogram the channel */ - chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); - chan_writel(up->txc, HSU_CH_D0TSR, count); - - /* Reenable the channel */ - chan_writel(up->txc, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24)); - up->dma_tx_on = 1; - chan_writel(up->txc, HSU_CH_CR, 0x1); - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); -} - -/* The buffer is already cache coherent */ -void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) -{ - dbuf->ofs = 0; - - chan_writel(rxc, HSU_CH_BSR, 32); - chan_writel(rxc, HSU_CH_MOTSR, 4); - - chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - chan_writel(rxc, HSU_CH_CR, 0x3); - - mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); -} - -/* Protected by spin_lock_irqsave(port->lock) */ -static void serial_hsu_start_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - if (up->use_dma) { - hsu_dma_tx(up); - } else if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_hsu_stop_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *txc = up->txc; - - if (up->use_dma) - chan_writel(txc, HSU_CH_CR, 0x0); - else if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -/* This is always called in spinlock protected mode, so - * modify timeout timer is safe here */ -void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) -{ - struct hsu_dma_buffer *dbuf = &up->rxbuf; - struct hsu_dma_chan *chan = up->rxc; - struct uart_port *port = &up->port; - struct tty_struct *tty = port->state->port.tty; - int count; - - if (!tty) - return; - - /* - * First need to know how many is already transferred, - * then check if its a timeout DMA irq, and return - * the trail bytes out, push them up and reenable the - * channel - */ - - /* Timeout IRQ, need wait some time, see Errata 2 */ - if (int_sts & 0xf00) - udelay(2); - - /* Stop the channel */ - chan_writel(chan, HSU_CH_CR, 0x0); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - if (!count) { - /* Restart the channel before we leave */ - chan_writel(chan, HSU_CH_CR, 0x3); - return; - } - del_timer(&chan->rx_timer); - - dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* - * Head will only wrap around when we recycle - * the DMA buffer, and when that happens, we - * explicitly set tail to 0. So head will - * always be greater than tail. - */ - tty_insert_flip_string(tty, dbuf->buf, count); - port->icount.rx += count; - - dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* Reprogram the channel */ - chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(chan, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - tty_flip_buffer_push(tty); - - chan_writel(chan, HSU_CH_CR, 0x3); - chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; - add_timer(&chan->rx_timer); - -} - -static void serial_hsu_stop_rx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *chan = up->rxc; - - if (up->use_dma) - chan_writel(chan, HSU_CH_CR, 0x2); - else { - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); - } -} - -static inline void receive_chars(struct uart_hsu_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch, flag; - unsigned int max_count = 256; - - if (!tty) - return; - - do { - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - - dev_warn(up->dev, "We really rush into ERR/BI case" - "status = 0x%02x", *status); - /* For statistics only */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* Mask off conditions which should be ignored. */ - *status &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (up->port.cons && - up->port.cons->index == up->port.line) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && max_count--); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_hsu_stop_tx(&up->port); - return; - } - -#ifndef MFD_HSU_A0_STEPPING - count = up->port.fifosize / 2; -#else - /* - * A0 only supports fully empty IRQ, and the first char written - * into it won't clear the EMPT bit, so we may need be cautious - * by useing a shorter buffer - */ - count = up->port.fifosize - 4; -#endif - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_hsu_stop_tx(&up->port); -} - -static inline void check_modem_status(struct uart_hsu_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - /* We may only get DDCD when HW init and reset */ - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - /* Will start/stop_tx accordingly */ - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -/* - * This handles the interrupt from one port. - */ -static irqreturn_t port_irq(int irq, void *dev_id) -{ - struct uart_hsu_port *up = dev_id; - unsigned int iir, lsr; - unsigned long flags; - - if (unlikely(!up->running)) - return IRQ_NONE; - - spin_lock_irqsave(&up->port.lock, flags); - if (up->use_dma) { - lsr = serial_in(up, UART_LSR); - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) - dev_warn(up->dev, - "Got lsr irq while using DMA, lsr = 0x%2x\n", - lsr); - check_modem_status(up); - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; - } - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) { - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_NONE; - } - - lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - check_modem_status(up); - - /* lsr will be renewed during the receive_chars */ - if (lsr & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; -} - -static inline void dma_chan_irq(struct hsu_dma_chan *chan) -{ - struct uart_hsu_port *up = chan->uport; - unsigned long flags; - u32 int_sts; - - spin_lock_irqsave(&up->port.lock, flags); - - if (!up->use_dma || !up->running) - goto exit; - - /* - * No matter what situation, need read clear the IRQ status - * There is a bug, see Errata 5, HSD 2900918 - */ - int_sts = chan_readl(chan, HSU_CH_SR); - - /* Rx channel */ - if (chan->dirt == DMA_FROM_DEVICE) - hsu_dma_rx(up, int_sts); - - /* Tx channel */ - if (chan->dirt == DMA_TO_DEVICE) { - chan_writel(chan, HSU_CH_CR, 0x0); - up->dma_tx_on = 0; - hsu_dma_tx(up); - } - -exit: - spin_unlock_irqrestore(&up->port.lock, flags); - return; -} - -static irqreturn_t dma_irq(int irq, void *dev_id) -{ - struct hsu_port *hsu = dev_id; - u32 int_sts, i; - - int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); - - /* Currently we only have 6 channels may be used */ - for (i = 0; i < 6; i++) { - if (int_sts & 0x1) - dma_chan_irq(&hsu->chans[i]); - int_sts >>= 1; - } - - return IRQ_HANDLED; -} - -static unsigned int serial_hsu_tx_empty(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_hsu_get_mctrl(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial_hsu_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * What special to do: - * 1. chose the 64B fifo mode - * 2. make sure not to select half empty mode for A0 stepping - * 3. start dma or pio depends on configuration - * 4. we only allocate dma memory when needed - */ -static int serial_hsu_startup(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - /* Clear the interrupt registers. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* Now, initialize the UART, default is 8n1 */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.mctrl |= TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - if (!up->use_dma) - up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; - else - up->ier = 0; - serial_out(up, UART_IER, up->ier); - - spin_unlock_irqrestore(&up->port.lock, flags); - - /* DMA init */ - if (up->use_dma) { - struct hsu_dma_buffer *dbuf; - struct circ_buf *xmit = &port->state->xmit; - - up->dma_tx_on = 0; - - /* First allocate the RX buffer */ - dbuf = &up->rxbuf; - dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); - if (!dbuf->buf) { - up->use_dma = 0; - goto exit; - } - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - HSU_DMA_BUF_SIZE, - DMA_FROM_DEVICE); - dbuf->dma_size = HSU_DMA_BUF_SIZE; - - /* Start the RX channel right now */ - hsu_dma_start_rx_chan(up->rxc, dbuf); - - /* Next init the TX DMA */ - dbuf = &up->txbuf; - dbuf->buf = xmit->buf; - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - dbuf->dma_size = UART_XMIT_SIZE; - - /* This should not be changed all around */ - chan_writel(up->txc, HSU_CH_BSR, 32); - chan_writel(up->txc, HSU_CH_MOTSR, 4); - dbuf->ofs = 0; - } - -exit: - /* And clear the interrupt registers again for luck. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - up->running = 1; - return 0; -} - -static void serial_hsu_shutdown(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - del_timer_sync(&up->rxc->rx_timer); - - /* Disable interrupts from this port */ - up->ier = 0; - serial_out(up, UART_IER, 0); - up->running = 0; - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Disable break condition and FIFOs */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -static void -serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - u32 ps, mul; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * The base clk is 50Mhz, and the baud rate come from: - * baud = 50M * MUL / (DIV * PS * DLAB) - * - * For those basic low baud rate we can get the direct - * scalar from 2746800, like 115200 = 2746800/24. For those - * higher baud rate, we handle them case by case, mainly by - * adjusting the MUL/PS registers, and DIV register is kept - * as default value 0x3d09 to make things simple - */ - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - - quot = 1; - ps = 0x10; - mul = 0x3600; - switch (baud) { - case 3500000: - mul = 0x3345; - ps = 0xC; - break; - case 1843200: - mul = 0x2400; - break; - case 3000000: - case 2500000: - case 2000000: - case 1500000: - case 1000000: - case 500000: - /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ - mul = baud / 500000 * 0x9C4; - break; - default: - /* Use uart_get_divisor to get quot for other baud rates */ - quot = 0; - } - - if (!quot) - quot = uart_get_divisor(port, baud); - - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; - else if ((up->port.uartclk / quot) < (230400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; - - fcr |= UART_FCR_HSU_64B_FIFO; -#ifdef MFD_HSU_A0_STEPPING - /* A0 doesn't support half empty IRQ */ - fcr |= UART_FCR_FULL_EMPT_TXI; -#endif - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* Update the per-port timeout */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* Characters to ignore */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* Ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts, disable - * MSI by default - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE | UART_MCR_RTS; - else - up->mcr &= ~UART_MCR_AFE; - - serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ - serial_out(up, UART_MUL, mul); /* set MUL */ - serial_out(up, UART_PS, ps); /* set PS */ - up->lcr = cval; /* Save LCR */ - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - serial_out(up, UART_FCR, fcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_hsu_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static void serial_hsu_release_port(struct uart_port *port) -{ -} - -static int serial_hsu_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_hsu_config_port(struct uart_port *port, int flags) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - up->port.type = PORT_MFD; -} - -static int -serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* We don't want the core code to modify any port params */ - return -EINVAL; -} - -static const char * -serial_hsu_type(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - return up->name; -} - -/* Mainly for uart console use */ -static struct uart_hsu_port *serial_hsu_ports[3]; -static struct uart_driver serial_hsu_reg; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_hsu_port *up) -{ - unsigned int status, tmout = 1000; - - /* Wait up to 1ms for the character to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while (!(status & BOTH_EMPTY)); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void serial_hsu_console_putchar(struct uart_port *port, int ch) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_hsu_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_hsu_port *up = serial_hsu_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* First save the IER then disable the interrupts */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial_hsu_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static struct console serial_hsu_console; - -static int __init -serial_hsu_console_setup(struct console *co, char *options) -{ - struct uart_hsu_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - if (co->index == -1 || co->index >= serial_hsu_reg.nr) - co->index = 0; - up = serial_hsu_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - ret = uart_set_options(&up->port, co, baud, parity, bits, flow); - - return ret; -} - -static struct console serial_hsu_console = { - .name = "ttyMFD", - .write = serial_hsu_console_write, - .device = uart_console_device, - .setup = serial_hsu_console_setup, - .flags = CON_PRINTBUFFER, - .index = 2, - .data = &serial_hsu_reg, -}; -#endif - -struct uart_ops serial_hsu_pops = { - .tx_empty = serial_hsu_tx_empty, - .set_mctrl = serial_hsu_set_mctrl, - .get_mctrl = serial_hsu_get_mctrl, - .stop_tx = serial_hsu_stop_tx, - .start_tx = serial_hsu_start_tx, - .stop_rx = serial_hsu_stop_rx, - .enable_ms = serial_hsu_enable_ms, - .break_ctl = serial_hsu_break_ctl, - .startup = serial_hsu_startup, - .shutdown = serial_hsu_shutdown, - .set_termios = serial_hsu_set_termios, - .pm = serial_hsu_pm, - .type = serial_hsu_type, - .release_port = serial_hsu_release_port, - .request_port = serial_hsu_request_port, - .config_port = serial_hsu_config_port, - .verify_port = serial_hsu_verify_port, -}; - -static struct uart_driver serial_hsu_reg = { - .owner = THIS_MODULE, - .driver_name = "MFD serial", - .dev_name = "ttyMFD", - .major = TTY_MAJOR, - .minor = 128, - .nr = 3, -}; - -#ifdef CONFIG_PM -static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - /* Make sure this is not the internal dma controller */ - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_suspend_port(&serial_hsu_reg, &up->port); - } - - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int serial_hsu_resume(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - ret = pci_enable_device(pdev); - if (ret) - dev_warn(&pdev->dev, - "HSU: can't re-enable device, try to continue\n"); - - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_resume_port(&serial_hsu_reg, &up->port); - } - return 0; -} -#else -#define serial_hsu_suspend NULL -#define serial_hsu_resume NULL -#endif - -/* temp global pointer before we settle down on using one or four PCI dev */ -static struct hsu_port *phsu; - -static int serial_hsu_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct uart_hsu_port *uport; - int index, ret; - - printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - - switch (pdev->device) { - case 0x081B: - index = 0; - break; - case 0x081C: - index = 1; - break; - case 0x081D: - index = 2; - break; - case 0x081E: - /* internal DMA controller */ - index = 3; - break; - default: - dev_err(&pdev->dev, "HSU: out of index!"); - return -ENODEV; - } - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - if (index == 3) { - /* DMA controller */ - ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - pci_set_drvdata(pdev, phsu); - } else { - /* UART port 0~2 */ - uport = &phsu->port[index]; - uport->port.irq = pdev->irq; - uport->port.dev = &pdev->dev; - uport->dev = &pdev->dev; - - ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - uart_add_one_port(&serial_hsu_reg, &uport->port); - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (index == 2) { - register_console(&serial_hsu_console); - uport->port.cons = &serial_hsu_console; - } -#endif - pci_set_drvdata(pdev, uport); - } - - return 0; - -err_disable: - pci_disable_device(pdev); - return ret; -} - -static void hsu_dma_rx_timeout(unsigned long data) -{ - struct hsu_dma_chan *chan = (void *)data; - struct uart_hsu_port *up = chan->uport; - struct hsu_dma_buffer *dbuf = &up->rxbuf; - int count = 0; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - - if (!count) { - mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); - goto exit; - } - - hsu_dma_rx(up, 0); -exit: - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void hsu_global_init(void) -{ - struct hsu_port *hsu; - struct uart_hsu_port *uport; - struct hsu_dma_chan *dchan; - int i, ret; - - hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); - if (!hsu) - return; - - /* Get basic io resource and map it */ - hsu->paddr = 0xffa28000; - hsu->iolen = 0x1000; - - if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) - pr_warning("HSU: error in request mem region\n"); - - hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); - if (!hsu->reg) { - pr_err("HSU: error in ioremap\n"); - ret = -ENOMEM; - goto err_free_region; - } - - /* Initialise the 3 UART ports */ - uport = hsu->port; - for (i = 0; i < 3; i++) { - uport->port.type = PORT_MFD; - uport->port.iotype = UPIO_MEM; - uport->port.mapbase = (resource_size_t)hsu->paddr - + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - - sprintf(uport->name, "hsu_port%d", i); - uport->port.fifosize = 64; - uport->port.ops = &serial_hsu_pops; - uport->port.line = i; - uport->port.flags = UPF_IOREMAP; - /* set the scalable maxim support rate to 2746800 bps */ - uport->port.uartclk = 115200 * 24 * 16; - - uport->running = 0; - uport->txc = &hsu->chans[i * 2]; - uport->rxc = &hsu->chans[i * 2 + 1]; - - serial_hsu_ports[i] = uport; - uport->index = i; - uport++; - } - - /* Initialise 6 dma channels */ - dchan = hsu->chans; - for (i = 0; i < 6; i++) { - dchan->id = i; - dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - dchan->uport = &hsu->port[i/2]; - dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + - i * HSU_DMA_CHANS_REG_LENGTH; - - /* Work around for RX */ - if (dchan->dirt == DMA_FROM_DEVICE) { - init_timer(&dchan->rx_timer); - dchan->rx_timer.function = hsu_dma_rx_timeout; - dchan->rx_timer.data = (unsigned long)dchan; - } - dchan++; - } - - phsu = hsu; - hsu_debugfs_init(hsu); - return; - -err_free_region: - release_mem_region(hsu->paddr, hsu->iolen); - kfree(hsu); - return; -} - -static void serial_hsu_remove(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - if (!priv) - return; - - /* For port 0/1/2, priv is the address of uart_hsu_port */ - if (pdev->device != 0x081E) { - up = priv; - uart_remove_one_port(&serial_hsu_reg, &up->port); - } - - pci_set_drvdata(pdev, NULL); - free_irq(pdev->irq, priv); - pci_disable_device(pdev); -} - -/* First 3 are UART ports, and the 4th is the DMA */ -static const struct pci_device_id pci_ids[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, - {}, -}; - -static struct pci_driver hsu_pci_driver = { - .name = "HSU serial", - .id_table = pci_ids, - .probe = serial_hsu_probe, - .remove = __devexit_p(serial_hsu_remove), - .suspend = serial_hsu_suspend, - .resume = serial_hsu_resume, -}; - -static int __init hsu_pci_init(void) -{ - int ret; - - hsu_global_init(); - - ret = uart_register_driver(&serial_hsu_reg); - if (ret) - return ret; - - return pci_register_driver(&hsu_pci_driver); -} - -static void __exit hsu_pci_exit(void) -{ - pci_unregister_driver(&hsu_pci_driver); - uart_unregister_driver(&serial_hsu_reg); - - hsu_debugfs_remove(phsu); - - kfree(phsu); -} - -module_init(hsu_pci_init); -module_exit(hsu_pci_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:medfield-hsu"); diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c deleted file mode 100644 index 126ec7f..0000000 --- a/drivers/serial/mpc52xx_uart.c +++ /dev/null @@ -1,1527 +0,0 @@ -/* - * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. - * - * FIXME According to the usermanual the status bits in the status register - * are only updated when the peripherals access the FIFO and not when the - * CPU access them. So since we use this bits to know when we stop writing - * and reading, they may not be updated in-time and a race condition may - * exists. But I haven't be able to prove this and I don't care. But if - * any problem arises, it might worth checking. The TX/RX FIFO Stats - * registers should be used in addition. - * Update: Actually, they seem updated ... At least the bits we use. - * - * - * Maintainer : Sylvain Munaut - * - * Some of the code has been inspired/copied from the 2.4 code written - * by Dale Farnsworth . - * - * Copyright (C) 2008 Freescale Semiconductor Inc. - * John Rigby - * Added support for MPC5121 - * Copyright (C) 2006 Secret Lab Technologies Ltd. - * Grant Likely - * Copyright (C) 2004-2006 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_PSC_MAJOR 204 -#define SERIAL_PSC_MINOR 148 - - -#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ - - -static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; - /* Rem: - We use the read_status_mask as a shadow of - * psc->mpc52xx_psc_imr - * - It's important that is array is all zero on start as we - * use it to know if it's initialized or not ! If it's not sure - * it's cleared, then a memset(...,0,...) should be added to - * the console_init - */ - -/* lookup table for matching device nodes to index numbers */ -static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; - -static void mpc52xx_uart_of_enumerate(void); - - -#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) - - -/* Forward declaration of the interruption handling routine */ -static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); -static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); - - -/* Simple macro to test if a port is console or not. This one is taken - * for serial_core.c and maybe should be moved to serial_core.h ? */ -#ifdef CONFIG_SERIAL_CORE_CONSOLE -#define uart_console(port) \ - ((port)->cons && (port)->cons->index == (port)->line) -#else -#define uart_console(port) (0) -#endif - -/* ======================================================================== */ -/* PSC fifo operations for isolating differences between 52xx and 512x */ -/* ======================================================================== */ - -struct psc_ops { - void (*fifo_init)(struct uart_port *port); - int (*raw_rx_rdy)(struct uart_port *port); - int (*raw_tx_rdy)(struct uart_port *port); - int (*rx_rdy)(struct uart_port *port); - int (*tx_rdy)(struct uart_port *port); - int (*tx_empty)(struct uart_port *port); - void (*stop_rx)(struct uart_port *port); - void (*start_tx)(struct uart_port *port); - void (*stop_tx)(struct uart_port *port); - void (*rx_clr_irq)(struct uart_port *port); - void (*tx_clr_irq)(struct uart_port *port); - void (*write_char)(struct uart_port *port, unsigned char c); - unsigned char (*read_char)(struct uart_port *port); - void (*cw_disable_ints)(struct uart_port *port); - void (*cw_restore_ints)(struct uart_port *port); - unsigned int (*set_baudrate)(struct uart_port *port, - struct ktermios *new, - struct ktermios *old); - int (*clock)(struct uart_port *port, int enable); - int (*fifoc_init)(void); - void (*fifoc_uninit)(void); - void (*get_irq)(struct uart_port *, struct device_node *); - irqreturn_t (*handle_irq)(struct uart_port *port); -}; - -/* setting the prescaler and divisor reg is common for all chips */ -static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, - u16 prescaler, unsigned int divisor) -{ - /* select prescaler */ - out_be16(&psc->mpc52xx_psc_clock_select, prescaler); - out_8(&psc->ctur, divisor >> 8); - out_8(&psc->ctlr, divisor & 0xff); -} - -#ifdef CONFIG_PPC_MPC52xx -#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) -static void mpc52xx_psc_fifo_init(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); - - out_8(&fifo->rfcntl, 0x00); - out_be16(&fifo->rfalarm, 0x1ff); - out_8(&fifo->tfcntl, 0x07); - out_be16(&fifo->tfalarm, 0x80); - - port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); -} - -static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_RXRDY; -} - -static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_TXRDY; -} - - -static int mpc52xx_psc_rx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_isr) - & port->read_status_mask - & MPC52xx_PSC_IMR_RXRDY; -} - -static int mpc52xx_psc_tx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_isr) - & port->read_status_mask - & MPC52xx_PSC_IMR_TXRDY; -} - -static int mpc52xx_psc_tx_empty(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_TXEMP; -} - -static void mpc52xx_psc_start_tx(struct uart_port *port) -{ - port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_stop_tx(struct uart_port *port) -{ - port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_stop_rx(struct uart_port *port) -{ - port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) -{ -} - -static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) -{ -} - -static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) -{ - out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); -} - -static unsigned char mpc52xx_psc_read_char(struct uart_port *port) -{ - return in_8(&PSC(port)->mpc52xx_psc_buffer_8); -} - -static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) -{ - out_be16(&PSC(port)->mpc52xx_psc_imr, 0); -} - -static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) -{ - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - - /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (32 * 0xffff) + 1, - port->uartclk / 32); - divisor = (port->uartclk + 16 * baud) / (32 * baud); - - /* enable the /32 prescaler and set the divisor */ - mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); - return baud; -} - -static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - u16 prescaler; - - /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the - * ipb freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (32 * 0xffff) + 1, - port->uartclk / 4); - divisor = (port->uartclk + 2 * baud) / (4 * baud); - - /* select the proper prescaler and set the divisor */ - if (divisor > 0xffff) { - divisor = (divisor + 4) / 8; - prescaler = 0xdd00; /* /32 */ - } else - prescaler = 0xff00; /* /4 */ - mpc52xx_set_divisor(PSC(port), prescaler, divisor); - return baud; -} - -static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) -{ - port->irqflags = IRQF_DISABLED; - port->irq = irq_of_parse_and_map(np, 0); -} - -/* 52xx specific interrupt handler. The caller holds the port lock */ -static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) -{ - return mpc5xxx_uart_process_int(port); -} - -static struct psc_ops mpc52xx_psc_ops = { - .fifo_init = mpc52xx_psc_fifo_init, - .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, - .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, - .rx_rdy = mpc52xx_psc_rx_rdy, - .tx_rdy = mpc52xx_psc_tx_rdy, - .tx_empty = mpc52xx_psc_tx_empty, - .stop_rx = mpc52xx_psc_stop_rx, - .start_tx = mpc52xx_psc_start_tx, - .stop_tx = mpc52xx_psc_stop_tx, - .rx_clr_irq = mpc52xx_psc_rx_clr_irq, - .tx_clr_irq = mpc52xx_psc_tx_clr_irq, - .write_char = mpc52xx_psc_write_char, - .read_char = mpc52xx_psc_read_char, - .cw_disable_ints = mpc52xx_psc_cw_disable_ints, - .cw_restore_ints = mpc52xx_psc_cw_restore_ints, - .set_baudrate = mpc5200_psc_set_baudrate, - .get_irq = mpc52xx_psc_get_irq, - .handle_irq = mpc52xx_psc_handle_irq, -}; - -static struct psc_ops mpc5200b_psc_ops = { - .fifo_init = mpc52xx_psc_fifo_init, - .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, - .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, - .rx_rdy = mpc52xx_psc_rx_rdy, - .tx_rdy = mpc52xx_psc_tx_rdy, - .tx_empty = mpc52xx_psc_tx_empty, - .stop_rx = mpc52xx_psc_stop_rx, - .start_tx = mpc52xx_psc_start_tx, - .stop_tx = mpc52xx_psc_stop_tx, - .rx_clr_irq = mpc52xx_psc_rx_clr_irq, - .tx_clr_irq = mpc52xx_psc_tx_clr_irq, - .write_char = mpc52xx_psc_write_char, - .read_char = mpc52xx_psc_read_char, - .cw_disable_ints = mpc52xx_psc_cw_disable_ints, - .cw_restore_ints = mpc52xx_psc_cw_restore_ints, - .set_baudrate = mpc5200b_psc_set_baudrate, - .get_irq = mpc52xx_psc_get_irq, - .handle_irq = mpc52xx_psc_handle_irq, -}; - -#endif /* CONFIG_MPC52xx */ - -#ifdef CONFIG_PPC_MPC512x -#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) - -/* PSC FIFO Controller for mpc512x */ -struct psc_fifoc { - u32 fifoc_cmd; - u32 fifoc_int; - u32 fifoc_dma; - u32 fifoc_axe; - u32 fifoc_debug; -}; - -static struct psc_fifoc __iomem *psc_fifoc; -static unsigned int psc_fifoc_irq; - -static void mpc512x_psc_fifo_init(struct uart_port *port) -{ - /* /32 prescaler */ - out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); - - out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); - out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); - out_be32(&FIFO_512x(port)->txalarm, 1); - out_be32(&FIFO_512x(port)->tximr, 0); - - out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); - out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); - out_be32(&FIFO_512x(port)->rxalarm, 1); - out_be32(&FIFO_512x(port)->rximr, 0); - - out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); - out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); -} - -static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) -{ - return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); -} - -static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) -{ - return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); -} - -static int mpc512x_psc_rx_rdy(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->rxsr) - & in_be32(&FIFO_512x(port)->rximr) - & MPC512x_PSC_FIFO_ALARM; -} - -static int mpc512x_psc_tx_rdy(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->txsr) - & in_be32(&FIFO_512x(port)->tximr) - & MPC512x_PSC_FIFO_ALARM; -} - -static int mpc512x_psc_tx_empty(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->txsr) - & MPC512x_PSC_FIFO_EMPTY; -} - -static void mpc512x_psc_stop_rx(struct uart_port *port) -{ - unsigned long rx_fifo_imr; - - rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); - rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); -} - -static void mpc512x_psc_start_tx(struct uart_port *port) -{ - unsigned long tx_fifo_imr; - - tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); - tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); -} - -static void mpc512x_psc_stop_tx(struct uart_port *port) -{ - unsigned long tx_fifo_imr; - - tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); - tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); -} - -static void mpc512x_psc_rx_clr_irq(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); -} - -static void mpc512x_psc_tx_clr_irq(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); -} - -static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) -{ - out_8(&FIFO_512x(port)->txdata_8, c); -} - -static unsigned char mpc512x_psc_read_char(struct uart_port *port) -{ - return in_8(&FIFO_512x(port)->rxdata_8); -} - -static void mpc512x_psc_cw_disable_ints(struct uart_port *port) -{ - port->read_status_mask = - in_be32(&FIFO_512x(port)->tximr) << 16 | - in_be32(&FIFO_512x(port)->rximr); - out_be32(&FIFO_512x(port)->tximr, 0); - out_be32(&FIFO_512x(port)->rximr, 0); -} - -static void mpc512x_psc_cw_restore_ints(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->tximr, - (port->read_status_mask >> 16) & 0x7f); - out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); -} - -static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - - /* - * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on - * pg. 30-10 that the chip supports a /32 and a /10 prescaler. - * Furthermore, it states that "After reset, the prescaler by 10 - * for the UART mode is selected", but the reset register value is - * 0x0000 which means a /32 prescaler. This is wrong. - * - * In reality using /32 prescaler doesn't work, as it is not supported! - * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", - * Chapter 4.1 PSC in UART Mode. - * Calculate with a /16 prescaler here. - */ - - /* uartclk contains the ips freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (16 * 0xffff) + 1, - port->uartclk / 16); - divisor = (port->uartclk + 8 * baud) / (16 * baud); - - /* enable the /16 prescaler and set the divisor */ - mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); - return baud; -} - -/* Init PSC FIFO Controller */ -static int __init mpc512x_psc_fifoc_init(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, - "fsl,mpc5121-psc-fifo"); - if (!np) { - pr_err("%s: Can't find FIFOC node\n", __func__); - return -ENODEV; - } - - psc_fifoc = of_iomap(np, 0); - if (!psc_fifoc) { - pr_err("%s: Can't map FIFOC\n", __func__); - of_node_put(np); - return -ENODEV; - } - - psc_fifoc_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); - if (psc_fifoc_irq == NO_IRQ) { - pr_err("%s: Can't get FIFOC irq\n", __func__); - iounmap(psc_fifoc); - return -ENODEV; - } - - return 0; -} - -static void __exit mpc512x_psc_fifoc_uninit(void) -{ - iounmap(psc_fifoc); -} - -/* 512x specific interrupt handler. The caller holds the port lock */ -static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) -{ - unsigned long fifoc_int; - int psc_num; - - /* Read pending PSC FIFOC interrupts */ - fifoc_int = in_be32(&psc_fifoc->fifoc_int); - - /* Check if it is an interrupt for this port */ - psc_num = (port->mapbase & 0xf00) >> 8; - if (test_bit(psc_num, &fifoc_int) || - test_bit(psc_num + 16, &fifoc_int)) - return mpc5xxx_uart_process_int(port); - - return IRQ_NONE; -} - -static int mpc512x_psc_clock(struct uart_port *port, int enable) -{ - struct clk *psc_clk; - int psc_num; - char clk_name[10]; - - if (uart_console(port)) - return 0; - - psc_num = (port->mapbase & 0xf00) >> 8; - snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); - psc_clk = clk_get(port->dev, clk_name); - if (IS_ERR(psc_clk)) { - dev_err(port->dev, "Failed to get PSC clock entry!\n"); - return -ENODEV; - } - - dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); - - if (enable) - clk_enable(psc_clk); - else - clk_disable(psc_clk); - - return 0; -} - -static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) -{ - port->irqflags = IRQF_SHARED; - port->irq = psc_fifoc_irq; -} - -static struct psc_ops mpc512x_psc_ops = { - .fifo_init = mpc512x_psc_fifo_init, - .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, - .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, - .rx_rdy = mpc512x_psc_rx_rdy, - .tx_rdy = mpc512x_psc_tx_rdy, - .tx_empty = mpc512x_psc_tx_empty, - .stop_rx = mpc512x_psc_stop_rx, - .start_tx = mpc512x_psc_start_tx, - .stop_tx = mpc512x_psc_stop_tx, - .rx_clr_irq = mpc512x_psc_rx_clr_irq, - .tx_clr_irq = mpc512x_psc_tx_clr_irq, - .write_char = mpc512x_psc_write_char, - .read_char = mpc512x_psc_read_char, - .cw_disable_ints = mpc512x_psc_cw_disable_ints, - .cw_restore_ints = mpc512x_psc_cw_restore_ints, - .set_baudrate = mpc512x_psc_set_baudrate, - .clock = mpc512x_psc_clock, - .fifoc_init = mpc512x_psc_fifoc_init, - .fifoc_uninit = mpc512x_psc_fifoc_uninit, - .get_irq = mpc512x_psc_get_irq, - .handle_irq = mpc512x_psc_handle_irq, -}; -#endif - -static struct psc_ops *psc_ops; - -/* ======================================================================== */ -/* UART operations */ -/* ======================================================================== */ - -static unsigned int -mpc52xx_uart_tx_empty(struct uart_port *port) -{ - return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; -} - -static void -mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - if (mctrl & TIOCM_RTS) - out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); - else - out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); -} - -static unsigned int -mpc52xx_uart_get_mctrl(struct uart_port *port) -{ - unsigned int ret = TIOCM_DSR; - u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr); - - if (!(status & MPC52xx_PSC_CTS)) - ret |= TIOCM_CTS; - if (!(status & MPC52xx_PSC_DCD)) - ret |= TIOCM_CAR; - - return ret; -} - -static void -mpc52xx_uart_stop_tx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->stop_tx(port); -} - -static void -mpc52xx_uart_start_tx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->start_tx(port); -} - -static void -mpc52xx_uart_send_xchar(struct uart_port *port, char ch) -{ - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); - - port->x_char = ch; - if (ch) { - /* Make sure tx interrupts are on */ - /* Truly necessary ??? They should be anyway */ - psc_ops->start_tx(port); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void -mpc52xx_uart_stop_rx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->stop_rx(port); -} - -static void -mpc52xx_uart_enable_ms(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - - /* clear D_*-bits by reading them */ - in_8(&psc->mpc52xx_psc_ipcr); - /* enable CTS and DCD as IPC interrupts */ - out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); - - port->read_status_mask |= MPC52xx_PSC_IMR_IPC; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); -} - -static void -mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); - - if (ctl == -1) - out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK); - else - out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static int -mpc52xx_uart_startup(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - int ret; - - if (psc_ops->clock) { - ret = psc_ops->clock(port, 1); - if (ret) - return ret; - } - - /* Request IRQ */ - ret = request_irq(port->irq, mpc52xx_uart_int, - port->irqflags, "mpc52xx_psc_uart", port); - if (ret) - return ret; - - /* Reset/activate the port, clear and enable interrupts */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - out_be32(&psc->sicr, 0); /* UART mode DCD ignored */ - - psc_ops->fifo_init(port); - - out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); - - return 0; -} - -static void -mpc52xx_uart_shutdown(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - - /* Shut down the port. Leave TX active if on a console port */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - if (!uart_console(port)) - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - port->read_status_mask = 0; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); - - if (psc_ops->clock) - psc_ops->clock(port, 0); - - /* Release interrupt */ - free_irq(port->irq, port); -} - -static void -mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - unsigned long flags; - unsigned char mr1, mr2; - unsigned int j; - unsigned int baud; - - /* Prepare what we're gonna write */ - mr1 = 0; - - switch (new->c_cflag & CSIZE) { - case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; - break; - case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; - break; - case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; - break; - case CS8: - default: mr1 |= MPC52xx_PSC_MODE_8_BITS; - } - - if (new->c_cflag & PARENB) { - mr1 |= (new->c_cflag & PARODD) ? - MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; - } else - mr1 |= MPC52xx_PSC_MODE_PARNONE; - - - mr2 = 0; - - if (new->c_cflag & CSTOPB) - mr2 |= MPC52xx_PSC_MODE_TWO_STOP; - else - mr2 |= ((new->c_cflag & CSIZE) == CS5) ? - MPC52xx_PSC_MODE_ONE_STOP_5_BITS : - MPC52xx_PSC_MODE_ONE_STOP; - - if (new->c_cflag & CRTSCTS) { - mr1 |= MPC52xx_PSC_MODE_RXRTS; - mr2 |= MPC52xx_PSC_MODE_TXCTS; - } - - /* Get the lock */ - spin_lock_irqsave(&port->lock, flags); - - /* Do our best to flush TX & RX, so we don't lose anything */ - /* But we don't wait indefinitely ! */ - j = 5000000; /* Maximum wait */ - /* FIXME Can't receive chars since set_termios might be called at early - * boot for the console, all stuff is not yet ready to receive at that - * time and that just makes the kernel oops */ - /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - - if (!j) - printk(KERN_ERR "mpc52xx_uart.c: " - "Unable to flush RX & TX fifos in-time in set_termios." - "Some chars may have been lost.\n"); - - /* Reset the TX & RX */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - /* Send new mode settings */ - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->mode, mr1); - out_8(&psc->mode, mr2); - baud = psc_ops->set_baudrate(port, new, old); - - /* Update the per-port timeout */ - uart_update_timeout(port, new->c_cflag, baud); - - if (UART_ENABLE_MS(port, new->c_cflag)) - mpc52xx_uart_enable_ms(port); - - /* Reenable TX & RX */ - out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); - - /* We're all set, release the lock */ - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char * -mpc52xx_uart_type(struct uart_port *port) -{ - /* - * We keep using PORT_MPC52xx for historic reasons although it applies - * for MPC512x, too, but print "MPC5xxx" to not irritate users - */ - return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; -} - -static void -mpc52xx_uart_release_port(struct uart_port *port) -{ - /* remapped by us ? */ - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); -} - -static int -mpc52xx_uart_request_port(struct uart_port *port) -{ - int err; - - if (port->flags & UPF_IOREMAP) /* Need to remap ? */ - port->membase = ioremap(port->mapbase, - sizeof(struct mpc52xx_psc)); - - if (!port->membase) - return -EINVAL; - - err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), - "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; - - if (err && (port->flags & UPF_IOREMAP)) { - iounmap(port->membase); - port->membase = NULL; - } - - return err; -} - -static void -mpc52xx_uart_config_port(struct uart_port *port, int flags) -{ - if ((flags & UART_CONFIG_TYPE) - && (mpc52xx_uart_request_port(port) == 0)) - port->type = PORT_MPC52xx; -} - -static int -mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) - return -EINVAL; - - if ((ser->irq != port->irq) || - (ser->io_type != UPIO_MEM) || - (ser->baud_base != port->uartclk) || - (ser->iomem_base != (void *)port->mapbase) || - (ser->hub6 != 0)) - return -EINVAL; - - return 0; -} - - -static struct uart_ops mpc52xx_uart_ops = { - .tx_empty = mpc52xx_uart_tx_empty, - .set_mctrl = mpc52xx_uart_set_mctrl, - .get_mctrl = mpc52xx_uart_get_mctrl, - .stop_tx = mpc52xx_uart_stop_tx, - .start_tx = mpc52xx_uart_start_tx, - .send_xchar = mpc52xx_uart_send_xchar, - .stop_rx = mpc52xx_uart_stop_rx, - .enable_ms = mpc52xx_uart_enable_ms, - .break_ctl = mpc52xx_uart_break_ctl, - .startup = mpc52xx_uart_startup, - .shutdown = mpc52xx_uart_shutdown, - .set_termios = mpc52xx_uart_set_termios, -/* .pm = mpc52xx_uart_pm, Not supported yet */ -/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ - .type = mpc52xx_uart_type, - .release_port = mpc52xx_uart_release_port, - .request_port = mpc52xx_uart_request_port, - .config_port = mpc52xx_uart_config_port, - .verify_port = mpc52xx_uart_verify_port -}; - - -/* ======================================================================== */ -/* Interrupt handling */ -/* ======================================================================== */ - -static inline int -mpc52xx_uart_int_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned char ch, flag; - unsigned short status; - - /* While we can read, do so ! */ - while (psc_ops->raw_rx_rdy(port)) { - /* Get the char */ - ch = psc_ops->read_char(port); - - /* Handle sysreq char */ -#ifdef SUPPORT_SYSRQ - if (uart_handle_sysrq_char(port, ch)) { - port->sysrq = 0; - continue; - } -#endif - - /* Store it */ - - flag = TTY_NORMAL; - port->icount.rx++; - - status = in_be16(&PSC(port)->mpc52xx_psc_status); - - if (status & (MPC52xx_PSC_SR_PE | - MPC52xx_PSC_SR_FE | - MPC52xx_PSC_SR_RB)) { - - if (status & MPC52xx_PSC_SR_RB) { - flag = TTY_BREAK; - uart_handle_break(port); - port->icount.brk++; - } else if (status & MPC52xx_PSC_SR_PE) { - flag = TTY_PARITY; - port->icount.parity++; - } - else if (status & MPC52xx_PSC_SR_FE) { - flag = TTY_FRAME; - port->icount.frame++; - } - - /* Clear error condition */ - out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); - - } - tty_insert_flip_char(tty, ch, flag); - if (status & MPC52xx_PSC_SR_OE) { - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - port->icount.overrun++; - } - } - - spin_unlock(&port->lock); - tty_flip_buffer_push(tty); - spin_lock(&port->lock); - - return psc_ops->raw_rx_rdy(port); -} - -static inline int -mpc52xx_uart_int_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - /* Process out of band chars */ - if (port->x_char) { - psc_ops->write_char(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return 1; - } - - /* Nothing to do ? */ - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - mpc52xx_uart_stop_tx(port); - return 0; - } - - /* Send chars */ - while (psc_ops->raw_tx_rdy(port)) { - psc_ops->write_char(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Wake up */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - /* Maybe we're done after all */ - if (uart_circ_empty(xmit)) { - mpc52xx_uart_stop_tx(port); - return 0; - } - - return 1; -} - -static irqreturn_t -mpc5xxx_uart_process_int(struct uart_port *port) -{ - unsigned long pass = ISR_PASS_LIMIT; - unsigned int keepgoing; - u8 status; - - /* While we have stuff to do, we continue */ - do { - /* If we don't find anything to do, we stop */ - keepgoing = 0; - - psc_ops->rx_clr_irq(port); - if (psc_ops->rx_rdy(port)) - keepgoing |= mpc52xx_uart_int_rx_chars(port); - - psc_ops->tx_clr_irq(port); - if (psc_ops->tx_rdy(port)) - keepgoing |= mpc52xx_uart_int_tx_chars(port); - - status = in_8(&PSC(port)->mpc52xx_psc_ipcr); - if (status & MPC52xx_PSC_D_DCD) - uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); - - if (status & MPC52xx_PSC_D_CTS) - uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); - - /* Limit number of iteration */ - if (!(--pass)) - keepgoing = 0; - - } while (keepgoing); - - return IRQ_HANDLED; -} - -static irqreturn_t -mpc52xx_uart_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - irqreturn_t ret; - - spin_lock(&port->lock); - - ret = psc_ops->handle_irq(port); - - spin_unlock(&port->lock); - - return ret; -} - -/* ======================================================================== */ -/* Console ( if applicable ) */ -/* ======================================================================== */ - -#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE - -static void __init -mpc52xx_console_get_options(struct uart_port *port, - int *baud, int *parity, int *bits, int *flow) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - unsigned char mr1; - - pr_debug("mpc52xx_console_get_options(port=%p)\n", port); - - /* Read the mode registers */ - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - mr1 = in_8(&psc->mode); - - /* CT{U,L}R are write-only ! */ - *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; - - /* Parse them */ - switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { - case MPC52xx_PSC_MODE_5_BITS: - *bits = 5; - break; - case MPC52xx_PSC_MODE_6_BITS: - *bits = 6; - break; - case MPC52xx_PSC_MODE_7_BITS: - *bits = 7; - break; - case MPC52xx_PSC_MODE_8_BITS: - default: - *bits = 8; - } - - if (mr1 & MPC52xx_PSC_MODE_PARNONE) - *parity = 'n'; - else - *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; -} - -static void -mpc52xx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &mpc52xx_uart_ports[co->index]; - unsigned int i, j; - - /* Disable interrupts */ - psc_ops->cw_disable_ints(port); - - /* Wait the TX buffer to be empty */ - j = 5000000; /* Maximum wait */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - - /* Write all the chars */ - for (i = 0; i < count; i++, s++) { - /* Line return handling */ - if (*s == '\n') - psc_ops->write_char(port, '\r'); - - /* Send the char */ - psc_ops->write_char(port, *s); - - /* Wait the TX buffer to be empty */ - j = 20000; /* Maximum wait */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - } - - /* Restore interrupt state */ - psc_ops->cw_restore_ints(port); -} - - -static int __init -mpc52xx_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &mpc52xx_uart_ports[co->index]; - struct device_node *np = mpc52xx_uart_nodes[co->index]; - unsigned int uartclk; - struct resource res; - int ret; - - int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", - co, co->index, options); - - if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { - pr_debug("PSC%x out of range\n", co->index); - return -EINVAL; - } - - if (!np) { - pr_debug("PSC%x not found in device tree\n", co->index); - return -EINVAL; - } - - pr_debug("Console on ttyPSC%x is %s\n", - co->index, mpc52xx_uart_nodes[co->index]->full_name); - - /* Fetch register locations */ - ret = of_address_to_resource(np, 0, &res); - if (ret) { - pr_debug("Could not get resources for PSC%x\n", co->index); - return ret; - } - - uartclk = mpc5xxx_get_bus_frequency(np); - if (uartclk == 0) { - pr_debug("Could not find uart clock frequency!\n"); - return -EINVAL; - } - - /* Basic port init. Needed since we use some uart_??? func before - * real init for early access */ - spin_lock_init(&port->lock); - port->uartclk = uartclk; - port->ops = &mpc52xx_uart_ops; - port->mapbase = res.start; - port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); - port->irq = irq_of_parse_and_map(np, 0); - - if (port->membase == NULL) - return -EINVAL; - - pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", - (void *)port->mapbase, port->membase, - port->irq, port->uartclk); - - /* Setup the port parameters accoding to options */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); - - pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", - baud, bits, parity, flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - - -static struct uart_driver mpc52xx_uart_driver; - -static struct console mpc52xx_console = { - .name = "ttyPSC", - .write = mpc52xx_console_write, - .device = uart_console_device, - .setup = mpc52xx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ - .data = &mpc52xx_uart_driver, -}; - - -static int __init -mpc52xx_console_init(void) -{ - mpc52xx_uart_of_enumerate(); - register_console(&mpc52xx_console); - return 0; -} - -console_initcall(mpc52xx_console_init); - -#define MPC52xx_PSC_CONSOLE &mpc52xx_console -#else -#define MPC52xx_PSC_CONSOLE NULL -#endif - - -/* ======================================================================== */ -/* UART Driver */ -/* ======================================================================== */ - -static struct uart_driver mpc52xx_uart_driver = { - .driver_name = "mpc52xx_psc_uart", - .dev_name = "ttyPSC", - .major = SERIAL_PSC_MAJOR, - .minor = SERIAL_PSC_MINOR, - .nr = MPC52xx_PSC_MAXNUM, - .cons = MPC52xx_PSC_CONSOLE, -}; - -/* ======================================================================== */ -/* OF Platform Driver */ -/* ======================================================================== */ - -static struct of_device_id mpc52xx_uart_of_match[] = { -#ifdef CONFIG_PPC_MPC52xx - { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, - { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, - /* binding used by old lite5200 device trees: */ - { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, - /* binding used by efika: */ - { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, -#endif -#ifdef CONFIG_PPC_MPC512x - { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, -#endif - {}, -}; - -static int __devinit -mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match) -{ - int idx = -1; - unsigned int uartclk; - struct uart_port *port = NULL; - struct resource res; - int ret; - - dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); - - /* Check validity & presence */ - for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) - if (mpc52xx_uart_nodes[idx] == op->dev.of_node) - break; - if (idx >= MPC52xx_PSC_MAXNUM) - return -EINVAL; - pr_debug("Found %s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[idx]->full_name, idx); - - /* set the uart clock to the input clock of the psc, the different - * prescalers are taken into account in the set_baudrate() methods - * of the respective chip */ - uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); - if (uartclk == 0) { - dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); - return -EINVAL; - } - - /* Init the port structure */ - port = &mpc52xx_uart_ports[idx]; - - spin_lock_init(&port->lock); - port->uartclk = uartclk; - port->fifosize = 512; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF | - (uart_console(port) ? 0 : UPF_IOREMAP); - port->line = idx; - port->ops = &mpc52xx_uart_ops; - port->dev = &op->dev; - - /* Search for IRQ and mapbase */ - ret = of_address_to_resource(op->dev.of_node, 0, &res); - if (ret) - return ret; - - port->mapbase = res.start; - if (!port->mapbase) { - dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); - return -EINVAL; - } - - psc_ops->get_irq(port, op->dev.of_node); - if (port->irq == NO_IRQ) { - dev_dbg(&op->dev, "Could not get irq\n"); - return -EINVAL; - } - - dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", - (void *)port->mapbase, port->irq, port->uartclk); - - /* Add the port to the uart sub-system */ - ret = uart_add_one_port(&mpc52xx_uart_driver, port); - if (ret) - return ret; - - dev_set_drvdata(&op->dev, (void *)port); - return 0; -} - -static int -mpc52xx_uart_of_remove(struct platform_device *op) -{ - struct uart_port *port = dev_get_drvdata(&op->dev); - dev_set_drvdata(&op->dev, NULL); - - if (port) - uart_remove_one_port(&mpc52xx_uart_driver, port); - - return 0; -} - -#ifdef CONFIG_PM -static int -mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) -{ - struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); - - if (port) - uart_suspend_port(&mpc52xx_uart_driver, port); - - return 0; -} - -static int -mpc52xx_uart_of_resume(struct platform_device *op) -{ - struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); - - if (port) - uart_resume_port(&mpc52xx_uart_driver, port); - - return 0; -} -#endif - -static void -mpc52xx_uart_of_assign(struct device_node *np) -{ - int i; - - /* Find the first free PSC number */ - for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { - if (mpc52xx_uart_nodes[i] == NULL) { - of_node_get(np); - mpc52xx_uart_nodes[i] = np; - return; - } - } -} - -static void -mpc52xx_uart_of_enumerate(void) -{ - static int enum_done; - struct device_node *np; - const struct of_device_id *match; - int i; - - if (enum_done) - return; - - /* Assign index to each PSC in device tree */ - for_each_matching_node(np, mpc52xx_uart_of_match) { - match = of_match_node(mpc52xx_uart_of_match, np); - psc_ops = match->data; - mpc52xx_uart_of_assign(np); - } - - enum_done = 1; - - for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { - if (mpc52xx_uart_nodes[i]) - pr_debug("%s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[i]->full_name, i); - } -} - -MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); - -static struct of_platform_driver mpc52xx_uart_of_driver = { - .probe = mpc52xx_uart_of_probe, - .remove = mpc52xx_uart_of_remove, -#ifdef CONFIG_PM - .suspend = mpc52xx_uart_of_suspend, - .resume = mpc52xx_uart_of_resume, -#endif - .driver = { - .name = "mpc52xx-psc-uart", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_uart_of_match, - }, -}; - - -/* ======================================================================== */ -/* Module */ -/* ======================================================================== */ - -static int __init -mpc52xx_uart_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); - - ret = uart_register_driver(&mpc52xx_uart_driver); - if (ret) { - printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", - __FILE__, ret); - return ret; - } - - mpc52xx_uart_of_enumerate(); - - /* - * Map the PSC FIFO Controller and init if on MPC512x. - */ - if (psc_ops && psc_ops->fifoc_init) { - ret = psc_ops->fifoc_init(); - if (ret) - return ret; - } - - ret = of_register_platform_driver(&mpc52xx_uart_of_driver); - if (ret) { - printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", - __FILE__, ret); - uart_unregister_driver(&mpc52xx_uart_driver); - return ret; - } - - return 0; -} - -static void __exit -mpc52xx_uart_exit(void) -{ - if (psc_ops->fifoc_uninit) - psc_ops->fifoc_uninit(); - - of_unregister_platform_driver(&mpc52xx_uart_of_driver); - uart_unregister_driver(&mpc52xx_uart_driver); -} - - -module_init(mpc52xx_uart_init); -module_exit(mpc52xx_uart_exit); - -MODULE_AUTHOR("Sylvain Munaut "); -MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c deleted file mode 100644 index 6a9c660..0000000 --- a/drivers/serial/mpsc.c +++ /dev/null @@ -1,2159 +0,0 @@ -/* - * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, - * GT64260, MV64340, MV64360, GT96100, ... ). - * - * Author: Mark A. Greer - * - * Based on an old MPSC driver that was in the linuxppc tree. It appears to - * have been created by Chris Zankel (formerly of MontaVista) but there - * is no proper Copyright so I'm not sure. Apparently, parts were also - * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c - * by Russell King. - * - * 2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * The MPSC interface is much like a typical network controller's interface. - * That is, you set up separate rings of descriptors for transmitting and - * receiving data. There is also a pool of buffers with (one buffer per - * descriptor) that incoming data are dma'd into or outgoing data are dma'd - * out of. - * - * The MPSC requires two other controllers to be able to work. The Baud Rate - * Generator (BRG) provides a clock at programmable frequencies which determines - * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the - * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the - * MPSC. It is actually the SDMA interrupt that the driver uses to keep the - * transmit and receive "engines" going (i.e., indicate data has been - * transmitted or received). - * - * NOTES: - * - * 1) Some chips have an erratum where several regs cannot be - * read. To work around that, we keep a local copy of those regs in - * 'mpsc_port_info'. - * - * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr - * accesses system mem with coherency enabled. For that reason, the driver - * assumes that coherency for that ctlr has been disabled. This means - * that when in a cache coherent system, the driver has to manually manage - * the data cache on the areas that it touches because the dma_* macro are - * basically no-ops. - * - * 3) There is an erratum (on PPC) where you can't use the instruction to do - * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places - * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. - * - * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. - */ - - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MPSC_NUM_CTLRS 2 - -/* - * Descriptors and buffers must be cache line aligned. - * Buffers lengths must be multiple of cache line size. - * Number of Tx & Rx descriptors must be powers of 2. - */ -#define MPSC_RXR_ENTRIES 32 -#define MPSC_RXRE_SIZE dma_get_cache_alignment() -#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) -#define MPSC_RXBE_SIZE dma_get_cache_alignment() -#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) - -#define MPSC_TXR_ENTRIES 32 -#define MPSC_TXRE_SIZE dma_get_cache_alignment() -#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) -#define MPSC_TXBE_SIZE dma_get_cache_alignment() -#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) - -#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \ - + MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */) - -/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ -struct mpsc_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -struct mpsc_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -/* - * Some regs that have the erratum that you can't read them are are shared - * between the two MPSC controllers. This struct contains those shared regs. - */ -struct mpsc_shared_regs { - phys_addr_t mpsc_routing_base_p; - phys_addr_t sdma_intr_base_p; - - void __iomem *mpsc_routing_base; - void __iomem *sdma_intr_base; - - u32 MPSC_MRR_m; - u32 MPSC_RCRR_m; - u32 MPSC_TCRR_m; - u32 SDMA_INTR_CAUSE_m; - u32 SDMA_INTR_MASK_m; -}; - -/* The main driver data structure */ -struct mpsc_port_info { - struct uart_port port; /* Overlay uart_port structure */ - - /* Internal driver state for this ctlr */ - u8 ready; - u8 rcv_data; - tcflag_t c_iflag; /* save termios->c_iflag */ - tcflag_t c_cflag; /* save termios->c_cflag */ - - /* Info passed in from platform */ - u8 mirror_regs; /* Need to mirror regs? */ - u8 cache_mgmt; /* Need manual cache mgmt? */ - u8 brg_can_tune; /* BRG has baud tuning? */ - u32 brg_clk_src; - u16 mpsc_max_idle; - int default_baud; - int default_bits; - int default_parity; - int default_flow; - - /* Physical addresses of various blocks of registers (from platform) */ - phys_addr_t mpsc_base_p; - phys_addr_t sdma_base_p; - phys_addr_t brg_base_p; - - /* Virtual addresses of various blocks of registers (from platform) */ - void __iomem *mpsc_base; - void __iomem *sdma_base; - void __iomem *brg_base; - - /* Descriptor ring and buffer allocations */ - void *dma_region; - dma_addr_t dma_region_p; - - dma_addr_t rxr; /* Rx descriptor ring */ - dma_addr_t rxr_p; /* Phys addr of rxr */ - u8 *rxb; /* Rx Ring I/O buf */ - u8 *rxb_p; /* Phys addr of rxb */ - u32 rxr_posn; /* First desc w/ Rx data */ - - dma_addr_t txr; /* Tx descriptor ring */ - dma_addr_t txr_p; /* Phys addr of txr */ - u8 *txb; /* Tx Ring I/O buf */ - u8 *txb_p; /* Phys addr of txb */ - int txr_head; /* Where new data goes */ - int txr_tail; /* Where sent data comes off */ - spinlock_t tx_lock; /* transmit lock */ - - /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ - u32 MPSC_MPCR_m; - u32 MPSC_CHR_1_m; - u32 MPSC_CHR_2_m; - u32 MPSC_CHR_10_m; - u32 BRG_BCR_m; - struct mpsc_shared_regs *shared_regs; -}; - -/* Hooks to platform-specific code */ -int mpsc_platform_register_driver(void); -void mpsc_platform_unregister_driver(void); - -/* Hooks back in to mpsc common to be called by platform-specific code */ -struct mpsc_port_info *mpsc_device_probe(int index); -struct mpsc_port_info *mpsc_device_remove(int index); - -/* Main MPSC Configuration Register Offsets */ -#define MPSC_MMCRL 0x0000 -#define MPSC_MMCRH 0x0004 -#define MPSC_MPCR 0x0008 -#define MPSC_CHR_1 0x000c -#define MPSC_CHR_2 0x0010 -#define MPSC_CHR_3 0x0014 -#define MPSC_CHR_4 0x0018 -#define MPSC_CHR_5 0x001c -#define MPSC_CHR_6 0x0020 -#define MPSC_CHR_7 0x0024 -#define MPSC_CHR_8 0x0028 -#define MPSC_CHR_9 0x002c -#define MPSC_CHR_10 0x0030 -#define MPSC_CHR_11 0x0034 - -#define MPSC_MPCR_FRZ (1 << 9) -#define MPSC_MPCR_CL_5 0 -#define MPSC_MPCR_CL_6 1 -#define MPSC_MPCR_CL_7 2 -#define MPSC_MPCR_CL_8 3 -#define MPSC_MPCR_SBL_1 0 -#define MPSC_MPCR_SBL_2 1 - -#define MPSC_CHR_2_TEV (1<<1) -#define MPSC_CHR_2_TA (1<<7) -#define MPSC_CHR_2_TTCS (1<<9) -#define MPSC_CHR_2_REV (1<<17) -#define MPSC_CHR_2_RA (1<<23) -#define MPSC_CHR_2_CRD (1<<25) -#define MPSC_CHR_2_EH (1<<31) -#define MPSC_CHR_2_PAR_ODD 0 -#define MPSC_CHR_2_PAR_SPACE 1 -#define MPSC_CHR_2_PAR_EVEN 2 -#define MPSC_CHR_2_PAR_MARK 3 - -/* MPSC Signal Routing */ -#define MPSC_MRR 0x0000 -#define MPSC_RCRR 0x0004 -#define MPSC_TCRR 0x0008 - -/* Serial DMA Controller Interface Registers */ -#define SDMA_SDC 0x0000 -#define SDMA_SDCM 0x0008 -#define SDMA_RX_DESC 0x0800 -#define SDMA_RX_BUF_PTR 0x0808 -#define SDMA_SCRDP 0x0810 -#define SDMA_TX_DESC 0x0c00 -#define SDMA_SCTDP 0x0c10 -#define SDMA_SFTDP 0x0c14 - -#define SDMA_DESC_CMDSTAT_PE (1<<0) -#define SDMA_DESC_CMDSTAT_CDL (1<<1) -#define SDMA_DESC_CMDSTAT_FR (1<<3) -#define SDMA_DESC_CMDSTAT_OR (1<<6) -#define SDMA_DESC_CMDSTAT_BR (1<<9) -#define SDMA_DESC_CMDSTAT_MI (1<<10) -#define SDMA_DESC_CMDSTAT_A (1<<11) -#define SDMA_DESC_CMDSTAT_AM (1<<12) -#define SDMA_DESC_CMDSTAT_CT (1<<13) -#define SDMA_DESC_CMDSTAT_C (1<<14) -#define SDMA_DESC_CMDSTAT_ES (1<<15) -#define SDMA_DESC_CMDSTAT_L (1<<16) -#define SDMA_DESC_CMDSTAT_F (1<<17) -#define SDMA_DESC_CMDSTAT_P (1<<18) -#define SDMA_DESC_CMDSTAT_EI (1<<23) -#define SDMA_DESC_CMDSTAT_O (1<<31) - -#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \ - | SDMA_DESC_CMDSTAT_EI) - -#define SDMA_SDC_RFT (1<<0) -#define SDMA_SDC_SFM (1<<1) -#define SDMA_SDC_BLMR (1<<6) -#define SDMA_SDC_BLMT (1<<7) -#define SDMA_SDC_POVR (1<<8) -#define SDMA_SDC_RIFB (1<<9) - -#define SDMA_SDCM_ERD (1<<7) -#define SDMA_SDCM_AR (1<<15) -#define SDMA_SDCM_STD (1<<16) -#define SDMA_SDCM_TXD (1<<23) -#define SDMA_SDCM_AT (1<<31) - -#define SDMA_0_CAUSE_RXBUF (1<<0) -#define SDMA_0_CAUSE_RXERR (1<<1) -#define SDMA_0_CAUSE_TXBUF (1<<2) -#define SDMA_0_CAUSE_TXEND (1<<3) -#define SDMA_1_CAUSE_RXBUF (1<<8) -#define SDMA_1_CAUSE_RXERR (1<<9) -#define SDMA_1_CAUSE_TXBUF (1<<10) -#define SDMA_1_CAUSE_TXEND (1<<11) - -#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \ - | SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) -#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \ - | SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) - -/* SDMA Interrupt registers */ -#define SDMA_INTR_CAUSE 0x0000 -#define SDMA_INTR_MASK 0x0080 - -/* Baud Rate Generator Interface Registers */ -#define BRG_BCR 0x0000 -#define BRG_BTR 0x0004 - -/* - * Define how this driver is known to the outside (we've been assigned a - * range on the "Low-density serial ports" major). - */ -#define MPSC_MAJOR 204 -#define MPSC_MINOR_START 44 -#define MPSC_DRIVER_NAME "MPSC" -#define MPSC_DEV_NAME "ttyMM" -#define MPSC_VERSION "1.00" - -static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; -static struct mpsc_shared_regs mpsc_shared_regs; -static struct uart_driver mpsc_reg; - -static void mpsc_start_rx(struct mpsc_port_info *pi); -static void mpsc_free_ring_mem(struct mpsc_port_info *pi); -static void mpsc_release_port(struct uart_port *port); -/* - ****************************************************************************** - * - * Baud Rate Generator Routines (BRG) - * - ****************************************************************************** - */ -static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); - - if (pi->brg_can_tune) - v &= ~(1 << 25); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); - - writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, - pi->brg_base + BRG_BTR); -} - -static void mpsc_brg_enable(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v |= (1 << 16); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); -} - -static void mpsc_brg_disable(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v &= ~(1 << 16); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); -} - -/* - * To set the baud, we adjust the CDV field in the BRG_BCR reg. - * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. - * However, the input clock is divided by 16 in the MPSC b/c of how - * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our - * calculation by 16 to account for that. So the real calculation - * that accounts for the way the mpsc is set up is: - * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. - */ -static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) -{ - u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; - u32 v; - - mpsc_brg_disable(pi); - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v = (v & 0xffff0000) | (cdv & 0xffff); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); - mpsc_brg_enable(pi); -} - -/* - ****************************************************************************** - * - * Serial DMA Routines (SDMA) - * - ****************************************************************************** - */ - -static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) -{ - u32 v; - - pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", - pi->port.line, burst_size); - - burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ - - if (burst_size < 2) - v = 0x0; /* 1 64-bit word */ - else if (burst_size < 4) - v = 0x1; /* 2 64-bit words */ - else if (burst_size < 8) - v = 0x2; /* 4 64-bit words */ - else - v = 0x3; /* 8 64-bit words */ - - writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), - pi->sdma_base + SDMA_SDC); -} - -static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) -{ - pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, - burst_size); - - writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, - pi->sdma_base + SDMA_SDC); - mpsc_sdma_burstsize(pi, burst_size); -} - -static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) -{ - u32 old, v; - - pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); - - old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : - readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - mask &= 0xf; - if (pi->port.line) - mask <<= 8; - v &= ~mask; - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_MASK_m = v; - writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - if (pi->port.line) - old >>= 8; - return old & 0xf; -} - -static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) -{ - u32 v; - - pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); - - v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m - : readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - mask &= 0xf; - if (pi->port.line) - mask <<= 8; - v |= mask; - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_MASK_m = v; - writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); -} - -static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_CAUSE_m = 0; - writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE - + pi->port.line); -} - -static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, - struct mpsc_rx_desc *rxre_p) -{ - pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", - pi->port.line, (u32)rxre_p); - - writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); -} - -static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, - struct mpsc_tx_desc *txre_p) -{ - writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); - writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); -} - -static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) -{ - u32 v; - - v = readl(pi->sdma_base + SDMA_SDCM); - if (val) - v |= val; - else - v = 0; - wmb(); - writel(v, pi->sdma_base + SDMA_SDCM); - wmb(); -} - -static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi) -{ - return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; -} - -static void mpsc_sdma_start_tx(struct mpsc_port_info *pi) -{ - struct mpsc_tx_desc *txre, *txre_p; - - /* If tx isn't running & there's a desc ready to go, start it */ - if (!mpsc_sdma_tx_active(pi)) { - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - - if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { - txre_p = (struct mpsc_tx_desc *) - (pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE)); - - mpsc_sdma_set_tx_ring(pi, txre_p); - mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); - } - } -} - -static void mpsc_sdma_stop(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); - - /* Abort any SDMA transfers */ - mpsc_sdma_cmd(pi, 0); - mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); - - /* Clear the SDMA current and first TX and RX pointers */ - mpsc_sdma_set_tx_ring(pi, NULL); - mpsc_sdma_set_rx_ring(pi, NULL); - - /* Disable interrupts */ - mpsc_sdma_intr_mask(pi, 0xf); - mpsc_sdma_intr_ack(pi); -} - -/* - ****************************************************************************** - * - * Multi-Protocol Serial Controller Routines (MPSC) - * - ****************************************************************************** - */ - -static void mpsc_hw_init(struct mpsc_port_info *pi) -{ - u32 v; - - pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); - - /* Set up clock routing */ - if (pi->mirror_regs) { - v = pi->shared_regs->MPSC_MRR_m; - v &= ~0x1c7; - pi->shared_regs->MPSC_MRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); - - v = pi->shared_regs->MPSC_RCRR_m; - v = (v & ~0xf0f) | 0x100; - pi->shared_regs->MPSC_RCRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - - v = pi->shared_regs->MPSC_TCRR_m; - v = (v & ~0xf0f) | 0x100; - pi->shared_regs->MPSC_TCRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - } else { - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); - v &= ~0x1c7; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); - - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - v = (v & ~0xf0f) | 0x100; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - v = (v & ~0xf0f) | 0x100; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - } - - /* Put MPSC in UART mode & enabel Tx/Rx egines */ - writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); - - /* No preamble, 16x divider, low-latency, */ - writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); - mpsc_set_baudrate(pi, pi->default_baud); - - if (pi->mirror_regs) { - pi->MPSC_CHR_1_m = 0; - pi->MPSC_CHR_2_m = 0; - } - writel(0, pi->mpsc_base + MPSC_CHR_1); - writel(0, pi->mpsc_base + MPSC_CHR_2); - writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); - writel(0, pi->mpsc_base + MPSC_CHR_4); - writel(0, pi->mpsc_base + MPSC_CHR_5); - writel(0, pi->mpsc_base + MPSC_CHR_6); - writel(0, pi->mpsc_base + MPSC_CHR_7); - writel(0, pi->mpsc_base + MPSC_CHR_8); - writel(0, pi->mpsc_base + MPSC_CHR_9); - writel(0, pi->mpsc_base + MPSC_CHR_10); -} - -static void mpsc_enter_hunt(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); - - if (pi->mirror_regs) { - writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, - pi->mpsc_base + MPSC_CHR_2); - /* Erratum prevents reading CHR_2 so just delay for a while */ - udelay(100); - } else { - writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, - pi->mpsc_base + MPSC_CHR_2); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) - udelay(10); - } -} - -static void mpsc_freeze(struct mpsc_port_info *pi) -{ - u32 v; - - pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v |= MPSC_MPCR_FRZ; - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_unfreeze(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v &= ~MPSC_MPCR_FRZ; - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); - - pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); -} - -static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) -{ - u32 v; - - pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) -{ - u32 v; - - pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", - pi->port.line, len); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - - v = (v & ~(1 << 14)) | ((len & 0x1) << 14); - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p) -{ - u32 v; - - pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); - - v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : - readl(pi->mpsc_base + MPSC_CHR_2); - - p &= 0x3; - v = (v & ~0xc000c) | (p << 18) | (p << 2); - - if (pi->mirror_regs) - pi->MPSC_CHR_2_m = v; - writel(v, pi->mpsc_base + MPSC_CHR_2); -} - -/* - ****************************************************************************** - * - * Driver Init Routines - * - ****************************************************************************** - */ - -static void mpsc_init_hw(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); - - mpsc_brg_init(pi, pi->brg_clk_src); - mpsc_brg_enable(pi); - mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ - mpsc_sdma_stop(pi); - mpsc_hw_init(pi); -} - -static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) -{ - int rc = 0; - - pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", - pi->port.line); - - if (!pi->dma_region) { - if (!dma_supported(pi->port.dev, 0xffffffff)) { - printk(KERN_ERR "MPSC: Inadequate DMA support\n"); - rc = -ENXIO; - } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, - MPSC_DMA_ALLOC_SIZE, - &pi->dma_region_p, GFP_KERNEL)) - == NULL) { - printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); - rc = -ENOMEM; - } - } - - return rc; -} - -static void mpsc_free_ring_mem(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); - - if (pi->dma_region) { - dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - pi->dma_region, pi->dma_region_p); - pi->dma_region = NULL; - pi->dma_region_p = (dma_addr_t)NULL; - } -} - -static void mpsc_init_rings(struct mpsc_port_info *pi) -{ - struct mpsc_rx_desc *rxre; - struct mpsc_tx_desc *txre; - dma_addr_t dp, dp_p; - u8 *bp, *bp_p; - int i; - - pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); - - BUG_ON(pi->dma_region == NULL); - - memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); - - /* - * Descriptors & buffers are multiples of cacheline size and must be - * cacheline aligned. - */ - dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment()); - dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment()); - - /* - * Partition dma region into rx ring descriptor, rx buffers, - * tx ring descriptors, and tx buffers. - */ - pi->rxr = dp; - pi->rxr_p = dp_p; - dp += MPSC_RXR_SIZE; - dp_p += MPSC_RXR_SIZE; - - pi->rxb = (u8 *)dp; - pi->rxb_p = (u8 *)dp_p; - dp += MPSC_RXB_SIZE; - dp_p += MPSC_RXB_SIZE; - - pi->rxr_posn = 0; - - pi->txr = dp; - pi->txr_p = dp_p; - dp += MPSC_TXR_SIZE; - dp_p += MPSC_TXR_SIZE; - - pi->txb = (u8 *)dp; - pi->txb_p = (u8 *)dp_p; - - pi->txr_head = 0; - pi->txr_tail = 0; - - /* Init rx ring descriptors */ - dp = pi->rxr; - dp_p = pi->rxr_p; - bp = pi->rxb; - bp_p = pi->rxb_p; - - for (i = 0; i < MPSC_RXR_ENTRIES; i++) { - rxre = (struct mpsc_rx_desc *)dp; - - rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); - rxre->bytecnt = cpu_to_be16(0); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O - | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L); - rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); - rxre->buf_ptr = cpu_to_be32(bp_p); - - dp += MPSC_RXRE_SIZE; - dp_p += MPSC_RXRE_SIZE; - bp += MPSC_RXBE_SIZE; - bp_p += MPSC_RXBE_SIZE; - } - rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ - - /* Init tx ring descriptors */ - dp = pi->txr; - dp_p = pi->txr_p; - bp = pi->txb; - bp_p = pi->txb_p; - - for (i = 0; i < MPSC_TXR_ENTRIES; i++) { - txre = (struct mpsc_tx_desc *)dp; - - txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); - txre->buf_ptr = cpu_to_be32(bp_p); - - dp += MPSC_TXRE_SIZE; - dp_p += MPSC_TXRE_SIZE; - bp += MPSC_TXBE_SIZE; - bp_p += MPSC_TXBE_SIZE; - } - txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ - - dma_cache_sync(pi->port.dev, (void *)pi->dma_region, - MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)pi->dma_region, - (ulong)pi->dma_region - + MPSC_DMA_ALLOC_SIZE); -#endif - - return; -} - -static void mpsc_uninit_rings(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); - - BUG_ON(pi->dma_region == NULL); - - pi->rxr = 0; - pi->rxr_p = 0; - pi->rxb = NULL; - pi->rxb_p = NULL; - pi->rxr_posn = 0; - - pi->txr = 0; - pi->txr_p = 0; - pi->txb = NULL; - pi->txb_p = NULL; - pi->txr_head = 0; - pi->txr_tail = 0; -} - -static int mpsc_make_ready(struct mpsc_port_info *pi) -{ - int rc; - - pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); - - if (!pi->ready) { - mpsc_init_hw(pi); - if ((rc = mpsc_alloc_ring_mem(pi))) - return rc; - mpsc_init_rings(pi); - pi->ready = 1; - } - - return 0; -} - -#ifdef CONFIG_CONSOLE_POLL -static int serial_polled; -#endif - -/* - ****************************************************************************** - * - * Interrupt Handling Routines - * - ****************************************************************************** - */ - -static int mpsc_rx_intr(struct mpsc_port_info *pi) -{ - struct mpsc_rx_desc *rxre; - struct tty_struct *tty = pi->port.state->port.tty; - u32 cmdstat, bytes_in, i; - int rc = 0; - u8 *bp; - char flag = TTY_NORMAL; - - pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); - - rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); - - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* - * Loop through Rx descriptors handling ones that have been completed. - */ - while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) - & SDMA_DESC_CMDSTAT_O)) { - bytes_in = be16_to_cpu(rxre->bytecnt); -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return 0; - } -#endif - /* Following use of tty struct directly is deprecated */ - if (unlikely(tty_buffer_request_room(tty, bytes_in) - < bytes_in)) { - if (tty->low_latency) - tty_flip_buffer_push(tty); - /* - * If this failed then we will throw away the bytes - * but must do so to clear interrupts. - */ - } - - bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)bp, - (ulong)bp + MPSC_RXBE_SIZE); -#endif - - /* - * Other than for parity error, the manual provides little - * info on what data will be in a frame flagged by any of - * these errors. For parity error, it is the last byte in - * the buffer that had the error. As for the rest, I guess - * we'll assume there is no data in the buffer. - * If there is...it gets lost. - */ - if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR - | SDMA_DESC_CMDSTAT_FR - | SDMA_DESC_CMDSTAT_OR))) { - - pi->port.icount.rx++; - - if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ - pi->port.icount.brk++; - - if (uart_handle_break(&pi->port)) - goto next_frame; - } else if (cmdstat & SDMA_DESC_CMDSTAT_FR) { - pi->port.icount.frame++; - } else if (cmdstat & SDMA_DESC_CMDSTAT_OR) { - pi->port.icount.overrun++; - } - - cmdstat &= pi->port.read_status_mask; - - if (cmdstat & SDMA_DESC_CMDSTAT_BR) - flag = TTY_BREAK; - else if (cmdstat & SDMA_DESC_CMDSTAT_FR) - flag = TTY_FRAME; - else if (cmdstat & SDMA_DESC_CMDSTAT_OR) - flag = TTY_OVERRUN; - else if (cmdstat & SDMA_DESC_CMDSTAT_PE) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(&pi->port, *bp)) { - bp++; - bytes_in--; -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return 0; - } -#endif - goto next_frame; - } - - if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR - | SDMA_DESC_CMDSTAT_FR - | SDMA_DESC_CMDSTAT_OR))) - && !(cmdstat & pi->port.ignore_status_mask)) { - tty_insert_flip_char(tty, *bp, flag); - } else { - for (i=0; iport.icount.rx += bytes_in; - } - -next_frame: - rxre->bytecnt = cpu_to_be16(0); - wmb(); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O - | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L); - wmb(); - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* Advance to next descriptor */ - pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); - rxre = (struct mpsc_rx_desc *) - (pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - rc = 1; - } - - /* Restart rx engine, if its stopped */ - if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) - mpsc_start_rx(pi); - - tty_flip_buffer_push(tty); - return rc; -} - -static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) -{ - struct mpsc_tx_desc *txre; - - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_head * MPSC_TXRE_SIZE)); - - txre->bytecnt = cpu_to_be16(count); - txre->shadow = txre->bytecnt; - wmb(); /* ensure cmdstat is last field updated */ - txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L - | ((intr) ? SDMA_DESC_CMDSTAT_EI : 0)); - wmb(); - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif -} - -static void mpsc_copy_tx_data(struct mpsc_port_info *pi) -{ - struct circ_buf *xmit = &pi->port.state->xmit; - u8 *bp; - u32 i; - - /* Make sure the desc ring isn't full */ - while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) - < (MPSC_TXR_ENTRIES - 1)) { - if (pi->port.x_char) { - /* - * Ideally, we should use the TCS field in - * CHR_1 to put the x_char out immediately but - * errata prevents us from being able to read - * CHR_2 to know that its safe to write to - * CHR_1. Instead, just put it in-band with - * all the other Tx data. - */ - bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - *bp = pi->port.x_char; - pi->port.x_char = 0; - i = 1; - } else if (!uart_circ_empty(xmit) - && !uart_tx_stopped(&pi->port)) { - i = min((u32)MPSC_TXBE_SIZE, - (u32)uart_circ_chars_pending(xmit)); - i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail, - UART_XMIT_SIZE)); - bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - memcpy(bp, &xmit->buf[xmit->tail], i); - xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&pi->port); - } else { /* All tx data copied into ring bufs */ - return; - } - - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)bp, - (ulong)bp + MPSC_TXBE_SIZE); -#endif - mpsc_setup_tx_desc(pi, i, 1); - - /* Advance to next descriptor */ - pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); - } -} - -static int mpsc_tx_intr(struct mpsc_port_info *pi) -{ - struct mpsc_tx_desc *txre; - int rc = 0; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - if (!mpsc_sdma_tx_active(pi)) { - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - - while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { - rc = 1; - pi->port.icount.tx += be16_to_cpu(txre->bytecnt); - pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); - - /* If no more data to tx, fall out of loop */ - if (pi->txr_head == pi->txr_tail) - break; - - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)txre, - MPSC_TXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - } - - mpsc_copy_tx_data(pi); - mpsc_sdma_start_tx(pi); /* start next desc if ready */ - } - - spin_unlock_irqrestore(&pi->tx_lock, iflags); - return rc; -} - -/* - * This is the driver's interrupt handler. To avoid a race, we first clear - * the interrupt, then handle any completed Rx/Tx descriptors. When done - * handling those descriptors, we restart the Rx/Tx engines if they're stopped. - */ -static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) -{ - struct mpsc_port_info *pi = dev_id; - ulong iflags; - int rc = IRQ_NONE; - - pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); - - spin_lock_irqsave(&pi->port.lock, iflags); - mpsc_sdma_intr_ack(pi); - if (mpsc_rx_intr(pi)) - rc = IRQ_HANDLED; - if (mpsc_tx_intr(pi)) - rc = IRQ_HANDLED; - spin_unlock_irqrestore(&pi->port.lock, iflags); - - pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); - return rc; -} - -/* - ****************************************************************************** - * - * serial_core.c Interface routines - * - ****************************************************************************** - */ -static uint mpsc_tx_empty(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - ulong iflags; - uint rc; - - spin_lock_irqsave(&pi->port.lock, iflags); - rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; - spin_unlock_irqrestore(&pi->port.lock, iflags); - - return rc; -} - -static void mpsc_set_mctrl(struct uart_port *port, uint mctrl) -{ - /* Have no way to set modem control lines AFAICT */ -} - -static uint mpsc_get_mctrl(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 mflags, status; - - status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m - : readl(pi->mpsc_base + MPSC_CHR_10); - - mflags = 0; - if (status & 0x1) - mflags |= TIOCM_CTS; - if (status & 0x2) - mflags |= TIOCM_CAR; - - return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ -} - -static void mpsc_stop_tx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_stop_tx[%d]\n", port->line); - - mpsc_freeze(pi); -} - -static void mpsc_start_tx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - mpsc_unfreeze(pi); - mpsc_copy_tx_data(pi); - mpsc_sdma_start_tx(pi); - - spin_unlock_irqrestore(&pi->tx_lock, iflags); - - pr_debug("mpsc_start_tx[%d]\n", port->line); -} - -static void mpsc_start_rx(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); - - if (pi->rcv_data) { - mpsc_enter_hunt(pi); - mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); - } -} - -static void mpsc_stop_rx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); - - if (pi->mirror_regs) { - writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA, - pi->mpsc_base + MPSC_CHR_2); - /* Erratum prevents reading CHR_2 so just delay for a while */ - udelay(100); - } else { - writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA, - pi->mpsc_base + MPSC_CHR_2); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA) - udelay(10); - } - - mpsc_sdma_cmd(pi, SDMA_SDCM_AR); -} - -static void mpsc_enable_ms(struct uart_port *port) -{ -} - -static void mpsc_break_ctl(struct uart_port *port, int ctl) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - ulong flags; - u32 v; - - v = ctl ? 0x00ff0000 : 0; - - spin_lock_irqsave(&pi->port.lock, flags); - if (pi->mirror_regs) - pi->MPSC_CHR_1_m = v; - writel(v, pi->mpsc_base + MPSC_CHR_1); - spin_unlock_irqrestore(&pi->port.lock, flags); -} - -static int mpsc_startup(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 flag = 0; - int rc; - - pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", - port->line, pi->port.irq); - - if ((rc = mpsc_make_ready(pi)) == 0) { - /* Setup IRQ handler */ - mpsc_sdma_intr_ack(pi); - - /* If irq's are shared, need to set flag */ - if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) - flag = IRQF_SHARED; - - if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, - "mpsc-sdma", pi)) - printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", - pi->port.irq); - - mpsc_sdma_intr_unmask(pi, 0xf); - mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p - + (pi->rxr_posn * MPSC_RXRE_SIZE))); - } - - return rc; -} - -static void mpsc_shutdown(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); - - mpsc_sdma_stop(pi); - free_irq(pi->port.irq, pi); -} - -static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 baud; - ulong flags; - u32 chr_bits, stop_bits, par; - - pi->c_iflag = termios->c_iflag; - pi->c_cflag = termios->c_cflag; - - switch (termios->c_cflag & CSIZE) { - case CS5: - chr_bits = MPSC_MPCR_CL_5; - break; - case CS6: - chr_bits = MPSC_MPCR_CL_6; - break; - case CS7: - chr_bits = MPSC_MPCR_CL_7; - break; - case CS8: - default: - chr_bits = MPSC_MPCR_CL_8; - break; - } - - if (termios->c_cflag & CSTOPB) - stop_bits = MPSC_MPCR_SBL_2; - else - stop_bits = MPSC_MPCR_SBL_1; - - par = MPSC_CHR_2_PAR_EVEN; - if (termios->c_cflag & PARENB) - if (termios->c_cflag & PARODD) - par = MPSC_CHR_2_PAR_ODD; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - par = MPSC_CHR_2_PAR_MARK; - else - par = MPSC_CHR_2_PAR_SPACE; - } -#endif - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); - - spin_lock_irqsave(&pi->port.lock, flags); - - uart_update_timeout(port, termios->c_cflag, baud); - - mpsc_set_char_length(pi, chr_bits); - mpsc_set_stop_bit_length(pi, stop_bits); - mpsc_set_parity(pi, par); - mpsc_set_baudrate(pi, baud); - - /* Characters/events to read */ - pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; - - if (termios->c_iflag & INPCK) - pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE - | SDMA_DESC_CMDSTAT_FR; - - if (termios->c_iflag & (BRKINT | PARMRK)) - pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; - - /* Characters/events to ignore */ - pi->port.ignore_status_mask = 0; - - if (termios->c_iflag & IGNPAR) - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE - | SDMA_DESC_CMDSTAT_FR; - - if (termios->c_iflag & IGNBRK) { - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; - - if (termios->c_iflag & IGNPAR) - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; - } - - if ((termios->c_cflag & CREAD)) { - if (!pi->rcv_data) { - pi->rcv_data = 1; - mpsc_start_rx(pi); - } - } else if (pi->rcv_data) { - mpsc_stop_rx(port); - pi->rcv_data = 0; - } - - spin_unlock_irqrestore(&pi->port.lock, flags); -} - -static const char *mpsc_type(struct uart_port *port) -{ - pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); - return MPSC_DRIVER_NAME; -} - -static int mpsc_request_port(struct uart_port *port) -{ - /* Should make chip/platform specific call */ - return 0; -} - -static void mpsc_release_port(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - if (pi->ready) { - mpsc_uninit_rings(pi); - mpsc_free_ring_mem(pi); - pi->ready = 0; - } -} - -static void mpsc_config_port(struct uart_port *port, int flags) -{ -} - -static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - int rc = 0; - - pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) - rc = -EINVAL; - else if (pi->port.irq != ser->irq) - rc = -EINVAL; - else if (ser->io_type != SERIAL_IO_MEM) - rc = -EINVAL; - else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ - rc = -EINVAL; - else if ((void *)pi->port.mapbase != ser->iomem_base) - rc = -EINVAL; - else if (pi->port.iobase != ser->port) - rc = -EINVAL; - else if (ser->hub6 != 0) - rc = -EINVAL; - - return rc; -} -#ifdef CONFIG_CONSOLE_POLL -/* Serial polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static char poll_buf[2048]; -static int poll_ptr; -static int poll_cnt; -static void mpsc_put_poll_char(struct uart_port *port, - unsigned char c); - -static int mpsc_get_poll_char(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - struct mpsc_rx_desc *rxre; - u32 cmdstat, bytes_in, i; - u8 *bp; - - if (!serial_polled) - serial_polled = 1; - - pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); - - if (poll_cnt) { - poll_cnt--; - return poll_buf[poll_ptr++]; - } - poll_ptr = 0; - poll_cnt = 0; - - while (poll_cnt == 0) { - rxre = (struct mpsc_rx_desc *)(pi->rxr + - (pi->rxr_posn*MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - /* - * Loop through Rx descriptors handling ones that have - * been completed. - */ - while (poll_cnt == 0 && - !((cmdstat = be32_to_cpu(rxre->cmdstat)) & - SDMA_DESC_CMDSTAT_O)){ - bytes_in = be16_to_cpu(rxre->bytecnt); - bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); - dma_cache_sync(pi->port.dev, (void *) bp, - MPSC_RXBE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)bp, - (ulong)bp + MPSC_RXBE_SIZE); -#endif - if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | - SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && - !(cmdstat & pi->port.ignore_status_mask)) { - poll_buf[poll_cnt] = *bp; - poll_cnt++; - } else { - for (i = 0; i < bytes_in; i++) { - poll_buf[poll_cnt] = *bp++; - poll_cnt++; - } - pi->port.icount.rx += bytes_in; - } - rxre->bytecnt = cpu_to_be16(0); - wmb(); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | - SDMA_DESC_CMDSTAT_EI | - SDMA_DESC_CMDSTAT_F | - SDMA_DESC_CMDSTAT_L); - wmb(); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* Advance to next descriptor */ - pi->rxr_posn = (pi->rxr_posn + 1) & - (MPSC_RXR_ENTRIES - 1); - rxre = (struct mpsc_rx_desc *)(pi->rxr + - (pi->rxr_posn * MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - } - - /* Restart rx engine, if its stopped */ - if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) - mpsc_start_rx(pi); - } - if (poll_cnt) { - poll_cnt--; - return poll_buf[poll_ptr++]; - } - - return 0; -} - - -static void mpsc_put_poll_char(struct uart_port *port, - unsigned char c) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 data; - - data = readl(pi->mpsc_base + MPSC_MPCR); - writeb(c, pi->mpsc_base + MPSC_CHR_1); - mb(); - data = readl(pi->mpsc_base + MPSC_CHR_2); - data |= MPSC_CHR_2_TTCS; - writel(data, pi->mpsc_base + MPSC_CHR_2); - mb(); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); -} -#endif - -static struct uart_ops mpsc_pops = { - .tx_empty = mpsc_tx_empty, - .set_mctrl = mpsc_set_mctrl, - .get_mctrl = mpsc_get_mctrl, - .stop_tx = mpsc_stop_tx, - .start_tx = mpsc_start_tx, - .stop_rx = mpsc_stop_rx, - .enable_ms = mpsc_enable_ms, - .break_ctl = mpsc_break_ctl, - .startup = mpsc_startup, - .shutdown = mpsc_shutdown, - .set_termios = mpsc_set_termios, - .type = mpsc_type, - .release_port = mpsc_release_port, - .request_port = mpsc_request_port, - .config_port = mpsc_config_port, - .verify_port = mpsc_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = mpsc_get_poll_char, - .poll_put_char = mpsc_put_poll_char, -#endif -}; - -/* - ****************************************************************************** - * - * Console Interface Routines - * - ****************************************************************************** - */ - -#ifdef CONFIG_SERIAL_MPSC_CONSOLE -static void mpsc_console_write(struct console *co, const char *s, uint count) -{ - struct mpsc_port_info *pi = &mpsc_ports[co->index]; - u8 *bp, *dp, add_cr = 0; - int i; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - while (pi->txr_head != pi->txr_tail) { - while (mpsc_sdma_tx_active(pi)) - udelay(100); - mpsc_sdma_intr_ack(pi); - mpsc_tx_intr(pi); - } - - while (mpsc_sdma_tx_active(pi)) - udelay(100); - - while (count > 0) { - bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - - for (i = 0; i < MPSC_TXBE_SIZE; i++) { - if (count == 0) - break; - - if (add_cr) { - *(dp++) = '\r'; - add_cr = 0; - } else { - *(dp++) = *s; - - if (*(s++) == '\n') { /* add '\r' after '\n' */ - add_cr = 1; - count++; - } - } - - count--; - } - - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)bp, - (ulong)bp + MPSC_TXBE_SIZE); -#endif - mpsc_setup_tx_desc(pi, i, 0); - pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); - mpsc_sdma_start_tx(pi); - - while (mpsc_sdma_tx_active(pi)) - udelay(100); - - pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); - } - - spin_unlock_irqrestore(&pi->tx_lock, iflags); -} - -static int __init mpsc_console_setup(struct console *co, char *options) -{ - struct mpsc_port_info *pi; - int baud, bits, parity, flow; - - pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); - - if (co->index >= MPSC_NUM_CTLRS) - co->index = 0; - - pi = &mpsc_ports[co->index]; - - baud = pi->default_baud; - bits = pi->default_bits; - parity = pi->default_parity; - flow = pi->default_flow; - - if (!pi->port.ops) - return -ENODEV; - - spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&pi->port, co, baud, parity, bits, flow); -} - -static struct console mpsc_console = { - .name = MPSC_DEV_NAME, - .write = mpsc_console_write, - .device = uart_console_device, - .setup = mpsc_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &mpsc_reg, -}; - -static int __init mpsc_late_console_init(void) -{ - pr_debug("mpsc_late_console_init: Enter\n"); - - if (!(mpsc_console.flags & CON_ENABLED)) - register_console(&mpsc_console); - return 0; -} - -late_initcall(mpsc_late_console_init); - -#define MPSC_CONSOLE &mpsc_console -#else -#define MPSC_CONSOLE NULL -#endif -/* - ****************************************************************************** - * - * Dummy Platform Driver to extract & map shared register regions - * - ****************************************************************************** - */ -static void mpsc_resource_err(char *s) -{ - printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); -} - -static int mpsc_shared_map_regs(struct platform_device *pd) -{ - struct resource *r; - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_ROUTING_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_ROUTING_REG_BLOCK_SIZE, - "mpsc_routing_regs")) { - mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, - MPSC_ROUTING_REG_BLOCK_SIZE); - mpsc_shared_regs.mpsc_routing_base_p = r->start; - } else { - mpsc_resource_err("MPSC routing base"); - return -ENOMEM; - } - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_SDMA_INTR_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_SDMA_INTR_REG_BLOCK_SIZE, - "sdma_intr_regs")) { - mpsc_shared_regs.sdma_intr_base = ioremap(r->start, - MPSC_SDMA_INTR_REG_BLOCK_SIZE); - mpsc_shared_regs.sdma_intr_base_p = r->start; - } else { - iounmap(mpsc_shared_regs.mpsc_routing_base); - release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, - MPSC_ROUTING_REG_BLOCK_SIZE); - mpsc_resource_err("SDMA intr base"); - return -ENOMEM; - } - - return 0; -} - -static void mpsc_shared_unmap_regs(void) -{ - if (!mpsc_shared_regs.mpsc_routing_base) { - iounmap(mpsc_shared_regs.mpsc_routing_base); - release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, - MPSC_ROUTING_REG_BLOCK_SIZE); - } - if (!mpsc_shared_regs.sdma_intr_base) { - iounmap(mpsc_shared_regs.sdma_intr_base); - release_mem_region(mpsc_shared_regs.sdma_intr_base_p, - MPSC_SDMA_INTR_REG_BLOCK_SIZE); - } - - mpsc_shared_regs.mpsc_routing_base = NULL; - mpsc_shared_regs.sdma_intr_base = NULL; - - mpsc_shared_regs.mpsc_routing_base_p = 0; - mpsc_shared_regs.sdma_intr_base_p = 0; -} - -static int mpsc_shared_drv_probe(struct platform_device *dev) -{ - struct mpsc_shared_pdata *pdata; - int rc = -ENODEV; - - if (dev->id == 0) { - if (!(rc = mpsc_shared_map_regs(dev))) { - pdata = (struct mpsc_shared_pdata *) - dev->dev.platform_data; - - mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; - mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; - mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; - mpsc_shared_regs.SDMA_INTR_CAUSE_m = - pdata->intr_cause_val; - mpsc_shared_regs.SDMA_INTR_MASK_m = - pdata->intr_mask_val; - - rc = 0; - } - } - - return rc; -} - -static int mpsc_shared_drv_remove(struct platform_device *dev) -{ - int rc = -ENODEV; - - if (dev->id == 0) { - mpsc_shared_unmap_regs(); - mpsc_shared_regs.MPSC_MRR_m = 0; - mpsc_shared_regs.MPSC_RCRR_m = 0; - mpsc_shared_regs.MPSC_TCRR_m = 0; - mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; - mpsc_shared_regs.SDMA_INTR_MASK_m = 0; - rc = 0; - } - - return rc; -} - -static struct platform_driver mpsc_shared_driver = { - .probe = mpsc_shared_drv_probe, - .remove = mpsc_shared_drv_remove, - .driver = { - .name = MPSC_SHARED_NAME, - }, -}; - -/* - ****************************************************************************** - * - * Driver Interface Routines - * - ****************************************************************************** - */ -static struct uart_driver mpsc_reg = { - .owner = THIS_MODULE, - .driver_name = MPSC_DRIVER_NAME, - .dev_name = MPSC_DEV_NAME, - .major = MPSC_MAJOR, - .minor = MPSC_MINOR_START, - .nr = MPSC_NUM_CTLRS, - .cons = MPSC_CONSOLE, -}; - -static int mpsc_drv_map_regs(struct mpsc_port_info *pi, - struct platform_device *pd) -{ - struct resource *r; - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) - && request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, - "mpsc_regs")) { - pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); - pi->mpsc_base_p = r->start; - } else { - mpsc_resource_err("MPSC base"); - goto err; - } - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_SDMA_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { - pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); - pi->sdma_base_p = r->start; - } else { - mpsc_resource_err("SDMA base"); - if (pi->mpsc_base) { - iounmap(pi->mpsc_base); - pi->mpsc_base = NULL; - } - goto err; - } - - if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) { - pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); - pi->brg_base_p = r->start; - } else { - mpsc_resource_err("BRG base"); - if (pi->mpsc_base) { - iounmap(pi->mpsc_base); - pi->mpsc_base = NULL; - } - if (pi->sdma_base) { - iounmap(pi->sdma_base); - pi->sdma_base = NULL; - } - goto err; - } - return 0; - -err: - return -ENOMEM; -} - -static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi) -{ - if (!pi->mpsc_base) { - iounmap(pi->mpsc_base); - release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); - } - if (!pi->sdma_base) { - iounmap(pi->sdma_base); - release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); - } - if (!pi->brg_base) { - iounmap(pi->brg_base); - release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); - } - - pi->mpsc_base = NULL; - pi->sdma_base = NULL; - pi->brg_base = NULL; - - pi->mpsc_base_p = 0; - pi->sdma_base_p = 0; - pi->brg_base_p = 0; -} - -static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, - struct platform_device *pd, int num) -{ - struct mpsc_pdata *pdata; - - pdata = (struct mpsc_pdata *)pd->dev.platform_data; - - pi->port.uartclk = pdata->brg_clk_freq; - pi->port.iotype = UPIO_MEM; - pi->port.line = num; - pi->port.type = PORT_MPSC; - pi->port.fifosize = MPSC_TXBE_SIZE; - pi->port.membase = pi->mpsc_base; - pi->port.mapbase = (ulong)pi->mpsc_base; - pi->port.ops = &mpsc_pops; - - pi->mirror_regs = pdata->mirror_regs; - pi->cache_mgmt = pdata->cache_mgmt; - pi->brg_can_tune = pdata->brg_can_tune; - pi->brg_clk_src = pdata->brg_clk_src; - pi->mpsc_max_idle = pdata->max_idle; - pi->default_baud = pdata->default_baud; - pi->default_bits = pdata->default_bits; - pi->default_parity = pdata->default_parity; - pi->default_flow = pdata->default_flow; - - /* Initial values of mirrored regs */ - pi->MPSC_CHR_1_m = pdata->chr_1_val; - pi->MPSC_CHR_2_m = pdata->chr_2_val; - pi->MPSC_CHR_10_m = pdata->chr_10_val; - pi->MPSC_MPCR_m = pdata->mpcr_val; - pi->BRG_BCR_m = pdata->bcr_val; - - pi->shared_regs = &mpsc_shared_regs; - - pi->port.irq = platform_get_irq(pd, 0); -} - -static int mpsc_drv_probe(struct platform_device *dev) -{ - struct mpsc_port_info *pi; - int rc = -ENODEV; - - pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id); - - if (dev->id < MPSC_NUM_CTLRS) { - pi = &mpsc_ports[dev->id]; - - if (!(rc = mpsc_drv_map_regs(pi, dev))) { - mpsc_drv_get_platform_data(pi, dev, dev->id); - pi->port.dev = &dev->dev; - - if (!(rc = mpsc_make_ready(pi))) { - spin_lock_init(&pi->tx_lock); - if (!(rc = uart_add_one_port(&mpsc_reg, - &pi->port))) { - rc = 0; - } else { - mpsc_release_port((struct uart_port *) - pi); - mpsc_drv_unmap_regs(pi); - } - } else { - mpsc_drv_unmap_regs(pi); - } - } - } - - return rc; -} - -static int mpsc_drv_remove(struct platform_device *dev) -{ - pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); - - if (dev->id < MPSC_NUM_CTLRS) { - uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); - mpsc_release_port((struct uart_port *) - &mpsc_ports[dev->id].port); - mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); - return 0; - } else { - return -ENODEV; - } -} - -static struct platform_driver mpsc_driver = { - .probe = mpsc_drv_probe, - .remove = mpsc_drv_remove, - .driver = { - .name = MPSC_CTLR_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init mpsc_drv_init(void) -{ - int rc; - - printk(KERN_INFO "Serial: MPSC driver\n"); - - memset(mpsc_ports, 0, sizeof(mpsc_ports)); - memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); - - if (!(rc = uart_register_driver(&mpsc_reg))) { - if (!(rc = platform_driver_register(&mpsc_shared_driver))) { - if ((rc = platform_driver_register(&mpsc_driver))) { - platform_driver_unregister(&mpsc_shared_driver); - uart_unregister_driver(&mpsc_reg); - } - } else { - uart_unregister_driver(&mpsc_reg); - } - } - - return rc; -} - -static void __exit mpsc_drv_exit(void) -{ - platform_driver_unregister(&mpsc_driver); - platform_driver_unregister(&mpsc_shared_driver); - uart_unregister_driver(&mpsc_reg); - memset(mpsc_ports, 0, sizeof(mpsc_ports)); - memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); -} - -module_init(mpsc_drv_init); -module_exit(mpsc_drv_exit); - -MODULE_AUTHOR("Mark A. Greer "); -MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); -MODULE_VERSION(MPSC_VERSION); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); -MODULE_ALIAS("platform:" MPSC_CTLR_NAME); diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c deleted file mode 100644 index b62857b..0000000 --- a/drivers/serial/mrst_max3110.c +++ /dev/null @@ -1,919 +0,0 @@ -/* - * mrst_max3110.c - spi uart protocol driver for Maxim 3110 - * - * Copyright (c) 2008-2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -/* - * Note: - * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has - * 1 word. If SPI master controller doesn't support sclk frequency change, - * then the char need be sent out one by one with some delay - * - * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE - * interrupt for a low speed UART device - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "mrst_max3110.h" - -#define PR_FMT "mrst_max3110: " - -#define UART_TX_NEEDED 1 -#define CON_TX_NEEDED 2 -#define BIT_IRQ_PENDING 3 - -struct uart_max3110 { - struct uart_port port; - struct spi_device *spi; - char name[24]; - - wait_queue_head_t wq; - struct task_struct *main_thread; - struct task_struct *read_thread; - struct mutex thread_mutex;; - - u32 baud; - u16 cur_conf; - u8 clock; - u8 parity, word_7bits; - u16 irq; - - unsigned long uart_flags; - - /* console related */ - struct circ_buf con_xmit; -}; - -/* global data structure, may need be removed */ -static struct uart_max3110 *pmax; - -static void receive_chars(struct uart_max3110 *max, - unsigned char *str, int len); -static int max3110_read_multi(struct uart_max3110 *max, u8 *buf); -static void max3110_con_receive(struct uart_max3110 *max); - -static int max3110_write_then_read(struct uart_max3110 *max, - const void *txbuf, void *rxbuf, unsigned len, int always_fast) -{ - struct spi_device *spi = max->spi; - struct spi_message message; - struct spi_transfer x; - int ret; - - spi_message_init(&message); - memset(&x, 0, sizeof x); - x.len = len; - x.tx_buf = txbuf; - x.rx_buf = rxbuf; - spi_message_add_tail(&x, &message); - - if (always_fast) - x.speed_hz = spi->max_speed_hz; - else if (max->baud) - x.speed_hz = max->baud; - - /* Do the i/o */ - ret = spi_sync(spi, &message); - return ret; -} - -/* Write a 16b word to the device */ -static int max3110_out(struct uart_max3110 *max, const u16 out) -{ - void *buf; - u16 *obuf, *ibuf; - u8 ch; - int ret; - - buf = kzalloc(8, GFP_KERNEL | GFP_DMA); - if (!buf) - return -ENOMEM; - - obuf = buf; - ibuf = buf + 4; - *obuf = out; - ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); - if (ret) { - pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n", - __func__, ret, out); - goto exit; - } - - /* If some valid data is read back */ - if (*ibuf & MAX3110_READ_DATA_AVAILABLE) { - ch = *ibuf & 0xff; - receive_chars(max, &ch, 1); - } - -exit: - kfree(buf); - return ret; -} - -/* - * This is usually used to read data from SPIC RX FIFO, which doesn't - * need any delay like flushing character out. - * - * Return how many valide bytes are read back - */ -static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf) -{ - void *buf; - u16 *obuf, *ibuf; - u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH]; - int i, j, blen; - - blen = M3110_RX_FIFO_DEPTH * sizeof(u16); - buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); - if (!buf) { - pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__); - return 0; - } - - /* tx/rx always have the same length */ - obuf = buf; - ibuf = buf + blen; - - if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) { - kfree(buf); - return 0; - } - - /* If caller doesn't provide a buffer, then handle received char */ - pbuf = rxbuf ? rxbuf : valid_str; - - for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) { - if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) - pbuf[j++] = ibuf[i] & 0xff; - } - - if (j && (pbuf == valid_str)) - receive_chars(max, valid_str, j); - - kfree(buf); - return j; -} - -static void serial_m3110_con_putchar(struct uart_port *port, int ch) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - struct circ_buf *xmit = &max->con_xmit; - - if (uart_circ_chars_free(xmit)) { - xmit->buf[xmit->head] = (char)ch; - xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); - } -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void serial_m3110_con_write(struct console *co, - const char *s, unsigned int count) -{ - if (!pmax) - return; - - uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); - - if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags)) - wake_up_process(pmax->main_thread); -} - -static int __init -serial_m3110_con_setup(struct console *co, char *options) -{ - struct uart_max3110 *max = pmax; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_info(PR_FMT "setting up console\n"); - - if (co->index == -1) - co->index = 0; - - if (!max) { - pr_err(PR_FMT "pmax is NULL, return"); - return -ENODEV; - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&max->port, co, baud, parity, bits, flow); -} - -static struct tty_driver *serial_m3110_con_device(struct console *co, - int *index) -{ - struct uart_driver *p = co->data; - *index = co->index; - return p->tty_driver; -} - -static struct uart_driver serial_m3110_reg; -static struct console serial_m3110_console = { - .name = "ttyS", - .write = serial_m3110_con_write, - .device = serial_m3110_con_device, - .setup = serial_m3110_con_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_m3110_reg, -}; - -static unsigned int serial_m3110_tx_empty(struct uart_port *port) -{ - return 1; -} - -static void serial_m3110_stop_tx(struct uart_port *port) -{ - return; -} - -/* stop_rx will be called in spin_lock env */ -static void serial_m3110_stop_rx(struct uart_port *port) -{ - return; -} - -#define WORDS_PER_XFER 128 -static void send_circ_buf(struct uart_max3110 *max, - struct circ_buf *xmit) -{ - void *buf; - u16 *obuf, *ibuf; - u8 valid_str[WORDS_PER_XFER]; - int i, j, len, blen, dma_size, left, ret = 0; - - - dma_size = WORDS_PER_XFER * sizeof(u16) * 2; - buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA); - if (!buf) - return; - obuf = buf; - ibuf = buf + dma_size/2; - - while (!uart_circ_empty(xmit)) { - left = uart_circ_chars_pending(xmit); - while (left) { - len = min(left, WORDS_PER_XFER); - blen = len * sizeof(u16); - memset(ibuf, 0, blen); - - for (i = 0; i < len; i++) { - obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - } - - /* Fail to send msg to console is not very critical */ - ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); - if (ret) - pr_warning(PR_FMT "%s(): get err msg %d\n", - __func__, ret); - - for (i = 0, j = 0; i < len; i++) { - if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) - valid_str[j++] = ibuf[i] & 0xff; - } - - if (j) - receive_chars(max, valid_str, j); - - max->port.icount.tx += len; - left -= len; - } - } - - kfree(buf); -} - -static void transmit_char(struct uart_max3110 *max) -{ - struct uart_port *port = &max->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - send_circ_buf(max, xmit); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - serial_m3110_stop_tx(port); -} - -/* - * This will be called by uart_write() and tty_write, can't - * go to sleep - */ -static void serial_m3110_start_tx(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - - if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) - wake_up_process(max->main_thread); -} - -static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) -{ - struct uart_port *port = &max->port; - struct tty_struct *tty; - int usable; - - /* If uart is not opened, just return */ - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - while (len) { - usable = tty_buffer_request_room(tty, len); - if (usable) { - tty_insert_flip_string(tty, str, usable); - str += usable; - port->icount.rx += usable; - } - len -= usable; - } - tty_flip_buffer_push(tty); -} - -/* - * This routine will be used in read_thread or RX IRQ handling, - * it will first do one round buffer read(8 words), if there is some - * valid RX data, will try to read 5 more rounds till all data - * is read out. - * - * Use stack space as data buffer to save some system load, and chose - * 504 Btyes as a threadhold to do a bulk push to upper tty layer when - * receiving bulk data, a much bigger buffer may cause stack overflow - */ -static void max3110_con_receive(struct uart_max3110 *max) -{ - int loop = 1, num, total = 0; - u8 recv_buf[512], *pbuf; - - pbuf = recv_buf; - do { - num = max3110_read_multi(max, pbuf); - - if (num) { - loop = 5; - pbuf += num; - total += num; - - if (total >= 504) { - receive_chars(max, recv_buf, total); - pbuf = recv_buf; - total = 0; - } - } - } while (--loop); - - if (total) - receive_chars(max, recv_buf, total); -} - -static int max3110_main_thread(void *_max) -{ - struct uart_max3110 *max = _max; - wait_queue_head_t *wq = &max->wq; - int ret = 0; - struct circ_buf *xmit = &max->con_xmit; - - init_waitqueue_head(wq); - pr_info(PR_FMT "start main thread\n"); - - do { - wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); - - mutex_lock(&max->thread_mutex); - - if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) - max3110_con_receive(max); - - /* first handle console output */ - if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) - send_circ_buf(max, xmit); - - /* handle uart output */ - if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) - transmit_char(max); - - mutex_unlock(&max->thread_mutex); - - } while (!kthread_should_stop()); - - return ret; -} - -static irqreturn_t serial_m3110_irq(int irq, void *dev_id) -{ - struct uart_max3110 *max = dev_id; - - /* max3110's irq is a falling edge, not level triggered, - * so no need to disable the irq */ - if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) - wake_up_process(max->main_thread); - - return IRQ_HANDLED; -} - -/* if don't use RX IRQ, then need a thread to polling read */ -static int max3110_read_thread(void *_max) -{ - struct uart_max3110 *max = _max; - - pr_info(PR_FMT "start read thread\n"); - do { - /* - * If can't acquire the mutex, it means the main thread - * is running which will also perform the rx job - */ - if (mutex_trylock(&max->thread_mutex)) { - max3110_con_receive(max); - mutex_unlock(&max->thread_mutex); - } - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ / 20); - } while (!kthread_should_stop()); - - return 0; -} - -static int serial_m3110_startup(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config = 0; - int ret = 0; - - if (port->line != 0) { - pr_err(PR_FMT "uart port startup failed\n"); - return -1; - } - - /* Disable all IRQ and config it to 115200, 8n1 */ - config = WC_TAG | WC_FIFO_ENABLE - | WC_1_STOPBITS - | WC_8BIT_WORD - | WC_BAUD_DR2; - - /* as we use thread to handle tx/rx, need set low latency */ - port->state->port.tty->low_latency = 1; - - if (max->irq) { - max->read_thread = NULL; - ret = request_irq(max->irq, serial_m3110_irq, - IRQ_TYPE_EDGE_FALLING, "max3110", max); - if (ret) { - max->irq = 0; - pr_err(PR_FMT "unable to allocate IRQ, polling\n"); - } else { - /* Enable RX IRQ only */ - config |= WC_RXA_IRQ_ENABLE; - } - } - - if (max->irq == 0) { - /* If IRQ is disabled, start a read thread for input data */ - max->read_thread = - kthread_run(max3110_read_thread, max, "max3110_read"); - if (IS_ERR(max->read_thread)) { - ret = PTR_ERR(max->read_thread); - max->read_thread = NULL; - pr_err(PR_FMT "Can't create read thread!\n"); - return ret; - } - } - - ret = max3110_out(max, config); - if (ret) { - if (max->irq) - free_irq(max->irq, max); - if (max->read_thread) - kthread_stop(max->read_thread); - max->read_thread = NULL; - return ret; - } - - max->cur_conf = config; - return 0; -} - -static void serial_m3110_shutdown(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config; - - if (max->read_thread) { - kthread_stop(max->read_thread); - max->read_thread = NULL; - } - - if (max->irq) - free_irq(max->irq, max); - - /* Disable interrupts from this port */ - config = WC_TAG | WC_SW_SHDI; - max3110_out(max, config); -} - -static void serial_m3110_release_port(struct uart_port *port) -{ -} - -static int serial_m3110_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_m3110_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_MAX3100; -} - -static int -serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - - -static const char *serial_m3110_type(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - return max->name; -} - -static void -serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - unsigned char cval; - unsigned int baud, parity = 0; - int clk_div = -1; - u16 new_conf = max->cur_conf; - - switch (termios->c_cflag & CSIZE) { - case CS7: - cval = UART_LCR_WLEN7; - new_conf |= WC_7BIT_WORD; - break; - default: - /* We only support CS7 & CS8 */ - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= CS8; - case CS8: - cval = UART_LCR_WLEN8; - new_conf |= WC_8BIT_WORD; - break; - } - - baud = uart_get_baud_rate(port, termios, old, 0, 230400); - - /* First calc the div for 1.8MHZ clock case */ - switch (baud) { - case 300: - clk_div = WC_BAUD_DR384; - break; - case 600: - clk_div = WC_BAUD_DR192; - break; - case 1200: - clk_div = WC_BAUD_DR96; - break; - case 2400: - clk_div = WC_BAUD_DR48; - break; - case 4800: - clk_div = WC_BAUD_DR24; - break; - case 9600: - clk_div = WC_BAUD_DR12; - break; - case 19200: - clk_div = WC_BAUD_DR6; - break; - case 38400: - clk_div = WC_BAUD_DR3; - break; - case 57600: - clk_div = WC_BAUD_DR2; - break; - case 115200: - clk_div = WC_BAUD_DR1; - break; - case 230400: - if (max->clock & MAX3110_HIGH_CLK) - break; - default: - /* Pick the previous baud rate */ - baud = max->baud; - clk_div = max->cur_conf & WC_BAUD_DIV_MASK; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - if (max->clock & MAX3110_HIGH_CLK) { - clk_div += 1; - /* High clk version max3110 doesn't support B300 */ - if (baud == 300) { - baud = 600; - clk_div = WC_BAUD_DR384; - } - if (baud == 230400) - clk_div = WC_BAUD_DR1; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; - - if (unlikely(termios->c_cflag & CMSPAR)) - termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - new_conf |= WC_2_STOPBITS; - else - new_conf &= ~WC_2_STOPBITS; - - if (termios->c_cflag & PARENB) { - new_conf |= WC_PARITY_ENABLE; - parity |= UART_LCR_PARITY; - } else - new_conf &= ~WC_PARITY_ENABLE; - - if (!(termios->c_cflag & PARODD)) - parity |= UART_LCR_EPAR; - max->parity = parity; - - uart_update_timeout(port, termios->c_cflag, baud); - - new_conf |= WC_TAG; - if (new_conf != max->cur_conf) { - if (!max3110_out(max, new_conf)) { - max->cur_conf = new_conf; - max->baud = baud; - } - } -} - -/* Don't handle hw handshaking */ -static unsigned int serial_m3110_get_mctrl(struct uart_port *port) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; -} - -static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void serial_m3110_break_ctl(struct uart_port *port, int break_state) -{ -} - -static void serial_m3110_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static void serial_m3110_enable_ms(struct uart_port *port) -{ -} - -struct uart_ops serial_m3110_ops = { - .tx_empty = serial_m3110_tx_empty, - .set_mctrl = serial_m3110_set_mctrl, - .get_mctrl = serial_m3110_get_mctrl, - .stop_tx = serial_m3110_stop_tx, - .start_tx = serial_m3110_start_tx, - .stop_rx = serial_m3110_stop_rx, - .enable_ms = serial_m3110_enable_ms, - .break_ctl = serial_m3110_break_ctl, - .startup = serial_m3110_startup, - .shutdown = serial_m3110_shutdown, - .set_termios = serial_m3110_set_termios, - .pm = serial_m3110_pm, - .type = serial_m3110_type, - .release_port = serial_m3110_release_port, - .request_port = serial_m3110_request_port, - .config_port = serial_m3110_config_port, - .verify_port = serial_m3110_verify_port, -}; - -static struct uart_driver serial_m3110_reg = { - .owner = THIS_MODULE, - .driver_name = "MRST serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = &serial_m3110_console, -}; - -#ifdef CONFIG_PM -static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) -{ - struct uart_max3110 *max = spi_get_drvdata(spi); - - disable_irq(max->irq); - uart_suspend_port(&serial_m3110_reg, &max->port); - max3110_out(max, max->cur_conf | WC_SW_SHDI); - return 0; -} - -static int serial_m3110_resume(struct spi_device *spi) -{ - struct uart_max3110 *max = spi_get_drvdata(spi); - - max3110_out(max, max->cur_conf); - uart_resume_port(&serial_m3110_reg, &max->port); - enable_irq(max->irq); - return 0; -} -#else -#define serial_m3110_suspend NULL -#define serial_m3110_resume NULL -#endif - -static int __devinit serial_m3110_probe(struct spi_device *spi) -{ - struct uart_max3110 *max; - void *buffer; - u16 res; - int ret = 0; - - max = kzalloc(sizeof(*max), GFP_KERNEL); - if (!max) - return -ENOMEM; - - /* Set spi info */ - spi->bits_per_word = 16; - max->clock = MAX3110_HIGH_CLK; - - spi_setup(spi); - - max->port.type = PORT_MAX3100; - max->port.fifosize = 2; /* Only have 16b buffer */ - max->port.ops = &serial_m3110_ops; - max->port.line = 0; - max->port.dev = &spi->dev; - max->port.uartclk = 115200; - - max->spi = spi; - strcpy(max->name, spi->modalias); - max->irq = (u16)spi->irq; - - mutex_init(&max->thread_mutex); - - max->word_7bits = 0; - max->parity = 0; - max->baud = 0; - - max->cur_conf = 0; - max->uart_flags = 0; - - /* Check if reading configuration register returns something sane */ - - res = RC_TAG; - ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); - if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", - res); - ret = -ENODEV; - goto err_get_page; - } - - buffer = (void *)__get_free_page(GFP_KERNEL); - if (!buffer) { - ret = -ENOMEM; - goto err_get_page; - } - max->con_xmit.buf = buffer; - max->con_xmit.head = 0; - max->con_xmit.tail = 0; - - max->main_thread = kthread_run(max3110_main_thread, - max, "max3110_main"); - if (IS_ERR(max->main_thread)) { - ret = PTR_ERR(max->main_thread); - goto err_kthread; - } - - spi_set_drvdata(spi, max); - pmax = max; - - /* Give membase a psudo value to pass serial_core's check */ - max->port.membase = (void *)0xff110000; - uart_add_one_port(&serial_m3110_reg, &max->port); - - return 0; - -err_kthread: - free_page((unsigned long)buffer); -err_get_page: - kfree(max); - return ret; -} - -static int __devexit serial_m3110_remove(struct spi_device *dev) -{ - struct uart_max3110 *max = spi_get_drvdata(dev); - - if (!max) - return 0; - - uart_remove_one_port(&serial_m3110_reg, &max->port); - - free_page((unsigned long)max->con_xmit.buf); - - if (max->main_thread) - kthread_stop(max->main_thread); - - kfree(max); - return 0; -} - -static struct spi_driver uart_max3110_driver = { - .driver = { - .name = "spi_max3111", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = serial_m3110_probe, - .remove = __devexit_p(serial_m3110_remove), - .suspend = serial_m3110_suspend, - .resume = serial_m3110_resume, -}; - -static int __init serial_m3110_init(void) -{ - int ret = 0; - - ret = uart_register_driver(&serial_m3110_reg); - if (ret) - return ret; - - ret = spi_register_driver(&uart_max3110_driver); - if (ret) - uart_unregister_driver(&serial_m3110_reg); - - return ret; -} - -static void __exit serial_m3110_exit(void) -{ - spi_unregister_driver(&uart_max3110_driver); - uart_unregister_driver(&serial_m3110_reg); -} - -module_init(serial_m3110_init); -module_exit(serial_m3110_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("max3110-uart"); diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h deleted file mode 100644 index d1ef43a..0000000 --- a/drivers/serial/mrst_max3110.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _MRST_MAX3110_H -#define _MRST_MAX3110_H - -#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ -#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ - -/* status bits for all 4 MAX3110 operate modes */ -#define MAX3110_READ_DATA_AVAILABLE (1 << 15) -#define MAX3110_WRITE_BUF_EMPTY (1 << 14) - -#define WC_TAG (3 << 14) -#define RC_TAG (1 << 14) -#define WD_TAG (2 << 14) -#define RD_TAG (0 << 14) - -/* bits def for write configuration */ -#define WC_FIFO_ENABLE_MASK (1 << 13) -#define WC_FIFO_ENABLE (0 << 13) - -#define WC_SW_SHDI (1 << 12) - -#define WC_IRQ_MASK (0xF << 8) -#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ -#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ -#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) -#define WC_REC_ACT_IRQ_ENABLE (1 << 8) - -#define WC_IRDA_ENABLE (1 << 7) - -#define WC_STOPBITS_MASK (1 << 6) -#define WC_2_STOPBITS (1 << 6) -#define WC_1_STOPBITS (0 << 6) - -#define WC_PARITY_ENABLE_MASK (1 << 5) -#define WC_PARITY_ENABLE (1 << 5) - -#define WC_WORDLEN_MASK (1 << 4) -#define WC_7BIT_WORD (1 << 4) -#define WC_8BIT_WORD (0 << 4) - -#define WC_BAUD_DIV_MASK (0xF) -#define WC_BAUD_DR1 (0x0) -#define WC_BAUD_DR2 (0x1) -#define WC_BAUD_DR4 (0x2) -#define WC_BAUD_DR8 (0x3) -#define WC_BAUD_DR16 (0x4) -#define WC_BAUD_DR32 (0x5) -#define WC_BAUD_DR64 (0x6) -#define WC_BAUD_DR128 (0x7) -#define WC_BAUD_DR3 (0x8) -#define WC_BAUD_DR6 (0x9) -#define WC_BAUD_DR12 (0xA) -#define WC_BAUD_DR24 (0xB) -#define WC_BAUD_DR48 (0xC) -#define WC_BAUD_DR96 (0xD) -#define WC_BAUD_DR192 (0xE) -#define WC_BAUD_DR384 (0xF) - -#define M3110_RX_FIFO_DEPTH 8 -#endif diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c deleted file mode 100644 index 8e43a7b..0000000 --- a/drivers/serial/msm_serial.c +++ /dev/null @@ -1,758 +0,0 @@ -/* - * drivers/serial/msm_serial.c - driver for msm7k serial device and console - * - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -# define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "msm_serial.h" - -struct msm_port { - struct uart_port uart; - char name[16]; - struct clk *clk; - unsigned int imr; -}; - -static void msm_stop_tx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr &= ~UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_start_tx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr |= UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_stop_rx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_enable_ms(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr |= UART_IMR_DELTA_CTS; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void handle_rx(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned int sr; - - /* - * Handle overrun. My understanding of the hardware is that overrun - * is not tied to the RX buffer, so we handle the case out of band. - */ - if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); - } - - /* and now the main RX loop */ - while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { - unsigned int c; - char flag = TTY_NORMAL; - - c = msm_read(port, UART_RF); - - if (sr & UART_SR_RX_BREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (sr & UART_SR_PAR_FRAME_ERR) { - port->icount.frame++; - } else { - port->icount.rx++; - } - - /* Mask conditions we're ignorning. */ - sr &= port->read_status_mask; - - if (sr & UART_SR_RX_BREAK) { - flag = TTY_BREAK; - } else if (sr & UART_SR_PAR_FRAME_ERR) { - flag = TTY_FRAME; - } - - if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); - } - - tty_flip_buffer_push(tty); -} - -static void handle_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - struct msm_port *msm_port = UART_TO_MSM(port); - int sent_tx; - - if (port->x_char) { - msm_write(port, port->x_char, UART_TF); - port->icount.tx++; - port->x_char = 0; - } - - while (msm_read(port, UART_SR) & UART_SR_TX_READY) { - if (uart_circ_empty(xmit)) { - /* disable tx interrupts */ - msm_port->imr &= ~UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); - break; - } - - msm_write(port, xmit->buf[xmit->tail], UART_TF); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - sent_tx = 1; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void handle_delta_cts(struct uart_port *port) -{ - msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - port->icount.cts++; - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static irqreturn_t msm_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int misr; - - spin_lock(&port->lock); - misr = msm_read(port, UART_MISR); - msm_write(port, 0, UART_IMR); /* disable interrupt */ - - if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) - handle_rx(port); - if (misr & UART_IMR_TXLEV) - handle_tx(port); - if (misr & UART_IMR_DELTA_CTS) - handle_delta_cts(port); - - msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int msm_tx_empty(struct uart_port *port) -{ - return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; -} - -static unsigned int msm_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; -} - -static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int mr; - - mr = msm_read(port, UART_MR1); - - if (!(mctrl & TIOCM_RTS)) { - mr &= ~UART_MR1_RX_RDY_CTL; - msm_write(port, mr, UART_MR1); - msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); - } else { - mr |= UART_MR1_RX_RDY_CTL; - msm_write(port, mr, UART_MR1); - } -} - -static void msm_break_ctl(struct uart_port *port, int break_ctl) -{ - if (break_ctl) - msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); - else - msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); -} - -static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) -{ - unsigned int baud_code, rxstale, watermark; - - switch (baud) { - case 300: - baud_code = UART_CSR_300; - rxstale = 1; - break; - case 600: - baud_code = UART_CSR_600; - rxstale = 1; - break; - case 1200: - baud_code = UART_CSR_1200; - rxstale = 1; - break; - case 2400: - baud_code = UART_CSR_2400; - rxstale = 1; - break; - case 4800: - baud_code = UART_CSR_4800; - rxstale = 1; - break; - case 9600: - baud_code = UART_CSR_9600; - rxstale = 2; - break; - case 14400: - baud_code = UART_CSR_14400; - rxstale = 3; - break; - case 19200: - baud_code = UART_CSR_19200; - rxstale = 4; - break; - case 28800: - baud_code = UART_CSR_28800; - rxstale = 6; - break; - case 38400: - baud_code = UART_CSR_38400; - rxstale = 8; - break; - case 57600: - baud_code = UART_CSR_57600; - rxstale = 16; - break; - case 115200: - default: - baud_code = UART_CSR_115200; - baud = 115200; - rxstale = 31; - break; - } - - msm_write(port, baud_code, UART_CSR); - - /* RX stale watermark */ - watermark = UART_IPR_STALE_LSB & rxstale; - watermark |= UART_IPR_RXSTALE_LAST; - watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); - msm_write(port, watermark, UART_IPR); - - /* set RX watermark */ - watermark = (port->fifosize * 3) / 4; - msm_write(port, watermark, UART_RFWR); - - /* set TX watermark */ - msm_write(port, 10, UART_TFWR); - - return baud; -} - -static void msm_reset(struct uart_port *port) -{ - /* reset everything */ - msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); - msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); - msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); - msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); - msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); -} - -static void msm_init_clock(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - clk_enable(msm_port->clk); - msm_serial_set_mnd_regs(port); -} - -static int msm_startup(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int data, rfr_level; - int ret; - - snprintf(msm_port->name, sizeof(msm_port->name), - "msm_serial%d", port->line); - - ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, - msm_port->name, port); - if (unlikely(ret)) - return ret; - - msm_init_clock(port); - - if (likely(port->fifosize > 12)) - rfr_level = port->fifosize - 12; - else - rfr_level = port->fifosize; - - /* set automatic RFR level */ - data = msm_read(port, UART_MR1); - data &= ~UART_MR1_AUTO_RFR_LEVEL1; - data &= ~UART_MR1_AUTO_RFR_LEVEL0; - data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); - data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; - msm_write(port, data, UART_MR1); - - /* make sure that RXSTALE count is non-zero */ - data = msm_read(port, UART_IPR); - if (unlikely(!data)) { - data |= UART_IPR_RXSTALE_LAST; - data |= UART_IPR_STALE_LSB; - msm_write(port, data, UART_IPR); - } - - msm_reset(port); - - msm_write(port, 0x05, UART_CR); /* enable TX & RX */ - - /* turn on RX and CTS interrupts */ - msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | - UART_IMR_CURRENT_CTS; - msm_write(port, msm_port->imr, UART_IMR); - - return 0; -} - -static void msm_shutdown(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr = 0; - msm_write(port, 0, UART_IMR); /* disable interrupts */ - - clk_disable(msm_port->clk); - - free_irq(port->irq, port); -} - -static void msm_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, mr; - - spin_lock_irqsave(&port->lock, flags); - - /* calculate and set baud rate */ - baud = uart_get_baud_rate(port, termios, old, 300, 115200); - baud = msm_set_baud_rate(port, baud); - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - - /* calculate parity */ - mr = msm_read(port, UART_MR2); - mr &= ~UART_MR2_PARITY_MODE; - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & PARODD) - mr |= UART_MR2_PARITY_MODE_ODD; - else if (termios->c_cflag & CMSPAR) - mr |= UART_MR2_PARITY_MODE_SPACE; - else - mr |= UART_MR2_PARITY_MODE_EVEN; - } - - /* calculate bits per char */ - mr &= ~UART_MR2_BITS_PER_CHAR; - switch (termios->c_cflag & CSIZE) { - case CS5: - mr |= UART_MR2_BITS_PER_CHAR_5; - break; - case CS6: - mr |= UART_MR2_BITS_PER_CHAR_6; - break; - case CS7: - mr |= UART_MR2_BITS_PER_CHAR_7; - break; - case CS8: - default: - mr |= UART_MR2_BITS_PER_CHAR_8; - break; - } - - /* calculate stop bits */ - mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); - if (termios->c_cflag & CSTOPB) - mr |= UART_MR2_STOP_BIT_LEN_TWO; - else - mr |= UART_MR2_STOP_BIT_LEN_ONE; - - /* set parity, bits per char, and stop bit */ - msm_write(port, mr, UART_MR2); - - /* calculate and set hardware flow control */ - mr = msm_read(port, UART_MR1); - mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); - if (termios->c_cflag & CRTSCTS) { - mr |= UART_MR1_CTS_CTL; - mr |= UART_MR1_RX_RDY_CTL; - } - msm_write(port, mr, UART_MR1); - - /* Configure status bits to ignore based on termio flags. */ - port->read_status_mask = 0; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART_SR_PAR_FRAME_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART_SR_RX_BREAK; - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *msm_type(struct uart_port *port) -{ - return "MSM"; -} - -static void msm_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *resource; - resource_size_t size; - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return; - size = resource->end - resource->start + 1; - - release_mem_region(port->mapbase, size); - iounmap(port->membase); - port->membase = NULL; -} - -static int msm_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *resource; - resource_size_t size; - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return -ENXIO; - size = resource->end - resource->start + 1; - - if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial"))) - return -EBUSY; - - port->membase = ioremap(port->mapbase, size); - if (!port->membase) { - release_mem_region(port->mapbase, size); - return -EBUSY; - } - - return 0; -} - -static void msm_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_MSM; - msm_request_port(port); - } -} - -static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) - return -EINVAL; - if (unlikely(port->irq != ser->irq)) - return -EINVAL; - return 0; -} - -static void msm_power(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - switch (state) { - case 0: - clk_enable(msm_port->clk); - break; - case 3: - clk_disable(msm_port->clk); - break; - default: - printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); - } -} - -static struct uart_ops msm_uart_pops = { - .tx_empty = msm_tx_empty, - .set_mctrl = msm_set_mctrl, - .get_mctrl = msm_get_mctrl, - .stop_tx = msm_stop_tx, - .start_tx = msm_start_tx, - .stop_rx = msm_stop_rx, - .enable_ms = msm_enable_ms, - .break_ctl = msm_break_ctl, - .startup = msm_startup, - .shutdown = msm_shutdown, - .set_termios = msm_set_termios, - .type = msm_type, - .release_port = msm_release_port, - .request_port = msm_request_port, - .config_port = msm_config_port, - .verify_port = msm_verify_port, - .pm = msm_power, -}; - -static struct msm_port msm_uart_ports[] = { - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 512, - .line = 0, - }, - }, - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 512, - .line = 1, - }, - }, - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 64, - .line = 2, - }, - }, -}; - -#define UART_NR ARRAY_SIZE(msm_uart_ports) - -static inline struct uart_port *get_port_from_line(unsigned int line) -{ - return &msm_uart_ports[line].uart; -} - -#ifdef CONFIG_SERIAL_MSM_CONSOLE - -static void msm_console_putchar(struct uart_port *port, int c) -{ - while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) - ; - msm_write(port, c, UART_TF); -} - -static void msm_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port; - struct msm_port *msm_port; - - BUG_ON(co->index < 0 || co->index >= UART_NR); - - port = get_port_from_line(co->index); - msm_port = UART_TO_MSM(port); - - spin_lock(&port->lock); - uart_console_write(port, s, count, msm_console_putchar); - spin_unlock(&port->lock); -} - -static int __init msm_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud, flow, bits, parity; - - if (unlikely(co->index >= UART_NR || co->index < 0)) - return -ENXIO; - - port = get_port_from_line(co->index); - - if (unlikely(!port->membase)) - return -ENXIO; - - port->cons = co; - - msm_init_clock(port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - bits = 8; - parity = 'n'; - flow = 'n'; - msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, - UART_MR2); /* 8N1 */ - - if (baud < 300 || baud > 115200) - baud = 115200; - msm_set_baud_rate(port, baud); - - msm_reset(port); - - printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver msm_uart_driver; - -static struct console msm_console = { - .name = "ttyMSM", - .write = msm_console_write, - .device = uart_console_device, - .setup = msm_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &msm_uart_driver, -}; - -#define MSM_CONSOLE (&msm_console) - -#else -#define MSM_CONSOLE NULL -#endif - -static struct uart_driver msm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "msm_serial", - .dev_name = "ttyMSM", - .nr = UART_NR, - .cons = MSM_CONSOLE, -}; - -static int __init msm_serial_probe(struct platform_device *pdev) -{ - struct msm_port *msm_port; - struct resource *resource; - struct uart_port *port; - int irq; - - if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) - return -ENXIO; - - printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); - - port = get_port_from_line(pdev->id); - port->dev = &pdev->dev; - msm_port = UART_TO_MSM(port); - - msm_port->clk = clk_get(&pdev->dev, "uart_clk"); - if (IS_ERR(msm_port->clk)) - return PTR_ERR(msm_port->clk); - port->uartclk = clk_get_rate(msm_port->clk); - printk(KERN_INFO "uartclk = %d\n", port->uartclk); - - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return -ENXIO; - port->mapbase = resource->start; - - irq = platform_get_irq(pdev, 0); - if (unlikely(irq < 0)) - return -ENXIO; - port->irq = irq; - - platform_set_drvdata(pdev, port); - - return uart_add_one_port(&msm_uart_driver, port); -} - -static int __devexit msm_serial_remove(struct platform_device *pdev) -{ - struct msm_port *msm_port = platform_get_drvdata(pdev); - - clk_put(msm_port->clk); - - return 0; -} - -static struct platform_driver msm_platform_driver = { - .remove = msm_serial_remove, - .driver = { - .name = "msm_serial", - .owner = THIS_MODULE, - }, -}; - -static int __init msm_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&msm_uart_driver); - if (unlikely(ret)) - return ret; - - ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); - if (unlikely(ret)) - uart_unregister_driver(&msm_uart_driver); - - printk(KERN_INFO "msm_serial: driver initialized\n"); - - return ret; -} - -static void __exit msm_serial_exit(void) -{ -#ifdef CONFIG_SERIAL_MSM_CONSOLE - unregister_console(&msm_console); -#endif - platform_driver_unregister(&msm_platform_driver); - uart_unregister_driver(&msm_uart_driver); -} - -module_init(msm_serial_init); -module_exit(msm_serial_exit); - -MODULE_AUTHOR("Robert Love "); -MODULE_DESCRIPTION("Driver for msm7x serial device"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h deleted file mode 100644 index f6ca9ca..0000000 --- a/drivers/serial/msm_serial.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * drivers/serial/msm_serial.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H -#define __DRIVERS_SERIAL_MSM_SERIAL_H - -#define UART_MR1 0x0000 - -#define UART_MR1_AUTO_RFR_LEVEL0 0x3F -#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 -#define UART_MR1_RX_RDY_CTL (1 << 7) -#define UART_MR1_CTS_CTL (1 << 6) - -#define UART_MR2 0x0004 -#define UART_MR2_ERROR_MODE (1 << 6) -#define UART_MR2_BITS_PER_CHAR 0x30 -#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) -#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) -#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) -#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) -#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) -#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) -#define UART_MR2_PARITY_MODE_NONE 0x0 -#define UART_MR2_PARITY_MODE_ODD 0x1 -#define UART_MR2_PARITY_MODE_EVEN 0x2 -#define UART_MR2_PARITY_MODE_SPACE 0x3 -#define UART_MR2_PARITY_MODE 0x3 - -#define UART_CSR 0x0008 -#define UART_CSR_115200 0xFF -#define UART_CSR_57600 0xEE -#define UART_CSR_38400 0xDD -#define UART_CSR_28800 0xCC -#define UART_CSR_19200 0xBB -#define UART_CSR_14400 0xAA -#define UART_CSR_9600 0x99 -#define UART_CSR_4800 0x77 -#define UART_CSR_2400 0x55 -#define UART_CSR_1200 0x44 -#define UART_CSR_600 0x33 -#define UART_CSR_300 0x22 - -#define UART_TF 0x000C - -#define UART_CR 0x0010 -#define UART_CR_CMD_NULL (0 << 4) -#define UART_CR_CMD_RESET_RX (1 << 4) -#define UART_CR_CMD_RESET_TX (2 << 4) -#define UART_CR_CMD_RESET_ERR (3 << 4) -#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) -#define UART_CR_CMD_START_BREAK (5 << 4) -#define UART_CR_CMD_STOP_BREAK (6 << 4) -#define UART_CR_CMD_RESET_CTS (7 << 4) -#define UART_CR_CMD_PACKET_MODE (9 << 4) -#define UART_CR_CMD_MODE_RESET (12 << 4) -#define UART_CR_CMD_SET_RFR (13 << 4) -#define UART_CR_CMD_RESET_RFR (14 << 4) -#define UART_CR_TX_DISABLE (1 << 3) -#define UART_CR_TX_ENABLE (1 << 3) -#define UART_CR_RX_DISABLE (1 << 3) -#define UART_CR_RX_ENABLE (1 << 3) - -#define UART_IMR 0x0014 -#define UART_IMR_TXLEV (1 << 0) -#define UART_IMR_RXSTALE (1 << 3) -#define UART_IMR_RXLEV (1 << 4) -#define UART_IMR_DELTA_CTS (1 << 5) -#define UART_IMR_CURRENT_CTS (1 << 6) - -#define UART_IPR_RXSTALE_LAST 0x20 -#define UART_IPR_STALE_LSB 0x1F -#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 - -#define UART_IPR 0x0018 -#define UART_TFWR 0x001C -#define UART_RFWR 0x0020 -#define UART_HCR 0x0024 - -#define UART_MREG 0x0028 -#define UART_NREG 0x002C -#define UART_DREG 0x0030 -#define UART_MNDREG 0x0034 -#define UART_IRDA 0x0038 -#define UART_MISR_MODE 0x0040 -#define UART_MISR_RESET 0x0044 -#define UART_MISR_EXPORT 0x0048 -#define UART_MISR_VAL 0x004C -#define UART_TEST_CTRL 0x0050 - -#define UART_SR 0x0008 -#define UART_SR_HUNT_CHAR (1 << 7) -#define UART_SR_RX_BREAK (1 << 6) -#define UART_SR_PAR_FRAME_ERR (1 << 5) -#define UART_SR_OVERRUN (1 << 4) -#define UART_SR_TX_EMPTY (1 << 3) -#define UART_SR_TX_READY (1 << 2) -#define UART_SR_RX_FULL (1 << 1) -#define UART_SR_RX_READY (1 << 0) - -#define UART_RF 0x000C -#define UART_MISR 0x0010 -#define UART_ISR 0x0014 - -#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port) - -static inline -void msm_write(struct uart_port *port, unsigned int val, unsigned int off) -{ - __raw_writel(val, port->membase + off); -} - -static inline -unsigned int msm_read(struct uart_port *port, unsigned int off) -{ - return __raw_readl(port->membase + off); -} - -/* - * Setup the MND registers to use the TCXO clock. - */ -static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) -{ - msm_write(port, 0x06, UART_MREG); - msm_write(port, 0xF1, UART_NREG); - msm_write(port, 0x0F, UART_DREG); - msm_write(port, 0x1A, UART_MNDREG); -} - -/* - * Setup the MND registers to use the TCXO clock divided by 4. - */ -static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) -{ - msm_write(port, 0x18, UART_MREG); - msm_write(port, 0xF6, UART_NREG); - msm_write(port, 0x0F, UART_DREG); - msm_write(port, 0x0A, UART_MNDREG); -} - -static inline -void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) -{ - if (port->uartclk == 19200000) - msm_serial_set_mnd_regs_tcxo(port); - else - msm_serial_set_mnd_regs_tcxoby4(port); -} - -/* - * TROUT has a specific defect that makes it report it's uartclk - * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special - * cases TROUT to use the right clock. - */ -#ifdef CONFIG_MACH_TROUT -#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4 -#else -#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk -#endif - -#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c deleted file mode 100644 index 9711e06..0000000 --- a/drivers/serial/mux.c +++ /dev/null @@ -1,633 +0,0 @@ -/* -** mux.c: -** serial driver for the Mux console found in some PA-RISC servers. -** -** (c) Copyright 2002 Ryan Bradetich -** (c) Copyright 2002 Hewlett-Packard Company -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** This Driver currently only supports the console (port 0) on the MUX. -** Additional work will be needed on this driver to enable the full -** functionality of the MUX. -** -*/ - -#include -#include -#include -#include -#include -#include -#include /* for udelay */ -#include -#include -#include -#include - -#ifdef CONFIG_MAGIC_SYSRQ -#include -#define SUPPORT_SYSRQ -#endif - -#include - -#define MUX_OFFSET 0x800 -#define MUX_LINE_OFFSET 0x80 - -#define MUX_FIFO_SIZE 255 -#define MUX_POLL_DELAY (30 * HZ / 1000) - -#define IO_DATA_REG_OFFSET 0x3c -#define IO_DCOUNT_REG_OFFSET 0x40 - -#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) -#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) -#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) - -#define MUX_NR 256 -static unsigned int port_cnt __read_mostly; -struct mux_port { - struct uart_port port; - int enabled; -}; -static struct mux_port mux_ports[MUX_NR]; - -static struct uart_driver mux_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyB", - .dev_name = "ttyB", - .major = MUX_MAJOR, - .minor = 0, - .nr = MUX_NR, -}; - -static struct timer_list mux_timer; - -#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) -#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) - -/** - * get_mux_port_count - Get the number of available ports on the Mux. - * @dev: The parisc device. - * - * This function is used to determine the number of ports the Mux - * supports. The IODC data reports the number of ports the Mux - * can support, but there are cases where not all the Mux ports - * are connected. This function can override the IODC and - * return the true port count. - */ -static int __init get_mux_port_count(struct parisc_device *dev) -{ - int status; - u8 iodc_data[32]; - unsigned long bytecnt; - - /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), - * we only need to allocate resources for 1 port since the - * other 7 ports are not connected. - */ - if(dev->id.hversion == 0x15) - return 1; - - status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); - BUG_ON(status != PDC_OK); - - /* Return the number of ports specified in the iodc data. */ - return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; -} - -/** - * mux_tx_empty - Check if the transmitter fifo is empty. - * @port: Ptr to the uart_port. - * - * This function test if the transmitter fifo for the port - * described by 'port' is empty. If it is empty, this function - * should return TIOCSER_TEMT, otherwise return 0. - */ -static unsigned int mux_tx_empty(struct uart_port *port) -{ - return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; -} - -/** - * mux_set_mctrl - Set the current state of the modem control inputs. - * @ports: Ptr to the uart_port. - * @mctrl: Modem control bits. - * - * The Serial MUX does not support CTS, DCD or DSR so this function - * is ignored. - */ -static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/** - * mux_get_mctrl - Returns the current state of modem control inputs. - * @port: Ptr to the uart_port. - * - * The Serial MUX does not support CTS, DCD or DSR so these lines are - * treated as permanently active. - */ -static unsigned int mux_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -/** - * mux_stop_tx - Stop transmitting characters. - * @port: Ptr to the uart_port. - * - * The Serial MUX does not support this function. - */ -static void mux_stop_tx(struct uart_port *port) -{ -} - -/** - * mux_start_tx - Start transmitting characters. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_start_tx(struct uart_port *port) -{ -} - -/** - * mux_stop_rx - Stop receiving characters. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_stop_rx(struct uart_port *port) -{ -} - -/** - * mux_enable_ms - Enable modum status interrupts. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_enable_ms(struct uart_port *port) -{ -} - -/** - * mux_break_ctl - Control the transmitssion of a break signal. - * @port: Ptr to the uart_port. - * @break_state: Raise/Lower the break signal. - * - * The Serial Mux does not support this function. - */ -static void mux_break_ctl(struct uart_port *port, int break_state) -{ -} - -/** - * mux_write - Write chars to the mux fifo. - * @port: Ptr to the uart_port. - * - * This function writes all the data from the uart buffer to - * the mux fifo. - */ -static void mux_write(struct uart_port *port) -{ - int count; - struct circ_buf *xmit = &port->state->xmit; - - if(port->x_char) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { - mux_stop_tx(port); - return; - } - - count = (port->fifosize) - UART_GET_FIFO_CNT(port); - do { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if(uart_circ_empty(xmit)) - break; - - } while(--count > 0); - - while(UART_GET_FIFO_CNT(port)) - udelay(1); - - if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - mux_stop_tx(port); -} - -/** - * mux_read - Read chars from the mux fifo. - * @port: Ptr to the uart_port. - * - * This reads all available data from the mux's fifo and pushes - * the data to the tty layer. - */ -static void mux_read(struct uart_port *port) -{ - int data; - struct tty_struct *tty = port->state->port.tty; - __u32 start_count = port->icount.rx; - - while(1) { - data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); - - if (MUX_STATUS(data)) - continue; - - if (MUX_EOFIFO(data)) - break; - - port->icount.rx++; - - if (MUX_BREAK(data)) { - port->icount.brk++; - if(uart_handle_break(port)) - continue; - } - - if (uart_handle_sysrq_char(port, data & 0xffu)) - continue; - - tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); - } - - if (start_count != port->icount.rx) { - tty_flip_buffer_push(tty); - } -} - -/** - * mux_startup - Initialize the port. - * @port: Ptr to the uart_port. - * - * Grab any resources needed for this port and start the - * mux timer. - */ -static int mux_startup(struct uart_port *port) -{ - mux_ports[port->line].enabled = 1; - return 0; -} - -/** - * mux_shutdown - Disable the port. - * @port: Ptr to the uart_port. - * - * Release any resources needed for the port. - */ -static void mux_shutdown(struct uart_port *port) -{ - mux_ports[port->line].enabled = 0; -} - -/** - * mux_set_termios - Chane port parameters. - * @port: Ptr to the uart_port. - * @termios: new termios settings. - * @old: old termios settings. - * - * The Serial Mux does not support this function. - */ -static void -mux_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -} - -/** - * mux_type - Describe the port. - * @port: Ptr to the uart_port. - * - * Return a pointer to a string constant describing the - * specified port. - */ -static const char *mux_type(struct uart_port *port) -{ - return "Mux"; -} - -/** - * mux_release_port - Release memory and IO regions. - * @port: Ptr to the uart_port. - * - * Release any memory and IO region resources currently in use by - * the port. - */ -static void mux_release_port(struct uart_port *port) -{ -} - -/** - * mux_request_port - Request memory and IO regions. - * @port: Ptr to the uart_port. - * - * Request any memory and IO region resources required by the port. - * If any fail, no resources should be registered when this function - * returns, and it should return -EBUSY on failure. - */ -static int mux_request_port(struct uart_port *port) -{ - return 0; -} - -/** - * mux_config_port - Perform port autoconfiguration. - * @port: Ptr to the uart_port. - * @type: Bitmask of required configurations. - * - * Perform any autoconfiguration steps for the port. This function is - * called if the UPF_BOOT_AUTOCONF flag is specified for the port. - * [Note: This is required for now because of a bug in the Serial core. - * rmk has already submitted a patch to linus, should be available for - * 2.5.47.] - */ -static void mux_config_port(struct uart_port *port, int type) -{ - port->type = PORT_MUX; -} - -/** - * mux_verify_port - Verify the port information. - * @port: Ptr to the uart_port. - * @ser: Ptr to the serial information. - * - * Verify the new serial port information contained within serinfo is - * suitable for this port type. - */ -static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if(port->membase == NULL) - return -EINVAL; - - return 0; -} - -/** - * mux_drv_poll - Mux poll function. - * @unused: Unused variable - * - * This function periodically polls the Serial MUX to check for new data. - */ -static void mux_poll(unsigned long unused) -{ - int i; - - for(i = 0; i < port_cnt; ++i) { - if(!mux_ports[i].enabled) - continue; - - mux_read(&mux_ports[i].port); - mux_write(&mux_ports[i].port); - } - - mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); -} - - -#ifdef CONFIG_SERIAL_MUX_CONSOLE -static void mux_console_write(struct console *co, const char *s, unsigned count) -{ - /* Wait until the FIFO drains. */ - while(UART_GET_FIFO_CNT(&mux_ports[0].port)) - udelay(1); - - while(count--) { - if(*s == '\n') { - UART_PUT_CHAR(&mux_ports[0].port, '\r'); - } - UART_PUT_CHAR(&mux_ports[0].port, *s++); - } - -} - -static int mux_console_setup(struct console *co, char *options) -{ - return 0; -} - -struct tty_driver *mux_console_device(struct console *co, int *index) -{ - *index = co->index; - return mux_driver.tty_driver; -} - -static struct console mux_console = { - .name = "ttyB", - .write = mux_console_write, - .device = mux_console_device, - .setup = mux_console_setup, - .flags = CON_ENABLED | CON_PRINTBUFFER, - .index = 0, -}; - -#define MUX_CONSOLE &mux_console -#else -#define MUX_CONSOLE NULL -#endif - -static struct uart_ops mux_pops = { - .tx_empty = mux_tx_empty, - .set_mctrl = mux_set_mctrl, - .get_mctrl = mux_get_mctrl, - .stop_tx = mux_stop_tx, - .start_tx = mux_start_tx, - .stop_rx = mux_stop_rx, - .enable_ms = mux_enable_ms, - .break_ctl = mux_break_ctl, - .startup = mux_startup, - .shutdown = mux_shutdown, - .set_termios = mux_set_termios, - .type = mux_type, - .release_port = mux_release_port, - .request_port = mux_request_port, - .config_port = mux_config_port, - .verify_port = mux_verify_port, -}; - -/** - * mux_probe - Determine if the Serial Mux should claim this device. - * @dev: The parisc device. - * - * Deterimine if the Serial Mux should claim this chip (return 0) - * or not (return 1). - */ -static int __init mux_probe(struct parisc_device *dev) -{ - int i, status; - - int port_count = get_mux_port_count(dev); - printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); - - dev_set_drvdata(&dev->dev, (void *)(long)port_count); - request_mem_region(dev->hpa.start + MUX_OFFSET, - port_count * MUX_LINE_OFFSET, "Mux"); - - if(!port_cnt) { - mux_driver.cons = MUX_CONSOLE; - - status = uart_register_driver(&mux_driver); - if(status) { - printk(KERN_ERR "Serial mux: Unable to register driver.\n"); - return 1; - } - } - - for(i = 0; i < port_count; ++i, ++port_cnt) { - struct uart_port *port = &mux_ports[port_cnt].port; - port->iobase = 0; - port->mapbase = dev->hpa.start + MUX_OFFSET + - (i * MUX_LINE_OFFSET); - port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET); - port->iotype = UPIO_MEM; - port->type = PORT_MUX; - port->irq = NO_IRQ; - port->uartclk = 0; - port->fifosize = MUX_FIFO_SIZE; - port->ops = &mux_pops; - port->flags = UPF_BOOT_AUTOCONF; - port->line = port_cnt; - - /* The port->timeout needs to match what is present in - * uart_wait_until_sent in serial_core.c. Otherwise - * the time spent in msleep_interruptable will be very - * long, causing the appearance of a console hang. - */ - port->timeout = HZ / 50; - spin_lock_init(&port->lock); - - status = uart_add_one_port(&mux_driver, port); - BUG_ON(status); - } - - return 0; -} - -static int __devexit mux_remove(struct parisc_device *dev) -{ - int i, j; - int port_count = (long)dev_get_drvdata(&dev->dev); - - /* Find Port 0 for this card in the mux_ports list. */ - for(i = 0; i < port_cnt; ++i) { - if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) - break; - } - BUG_ON(i + port_count > port_cnt); - - /* Release the resources associated with each port on the device. */ - for(j = 0; j < port_count; ++j, ++i) { - struct uart_port *port = &mux_ports[i].port; - - uart_remove_one_port(&mux_driver, port); - if(port->membase) - iounmap(port->membase); - } - - release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); - return 0; -} - -/* Hack. This idea was taken from the 8250_gsc.c on how to properly order - * the serial port detection in the proper order. The idea is we always - * want the builtin mux to be detected before addin mux cards, so we - * specifically probe for the builtin mux cards first. - * - * This table only contains the parisc_device_id of known builtin mux - * devices. All other mux cards will be detected by the generic mux_tbl. - */ -static struct parisc_device_id builtin_mux_tbl[] = { - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ - { 0, } -}; - -static struct parisc_device_id mux_tbl[] = { - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, - { 0, } -}; - -MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); -MODULE_DEVICE_TABLE(parisc, mux_tbl); - -static struct parisc_driver builtin_serial_mux_driver = { - .name = "builtin_serial_mux", - .id_table = builtin_mux_tbl, - .probe = mux_probe, - .remove = __devexit_p(mux_remove), -}; - -static struct parisc_driver serial_mux_driver = { - .name = "serial_mux", - .id_table = mux_tbl, - .probe = mux_probe, - .remove = __devexit_p(mux_remove), -}; - -/** - * mux_init - Serial MUX initialization procedure. - * - * Register the Serial MUX driver. - */ -static int __init mux_init(void) -{ - register_parisc_driver(&builtin_serial_mux_driver); - register_parisc_driver(&serial_mux_driver); - - if(port_cnt > 0) { - /* Start the Mux timer */ - init_timer(&mux_timer); - mux_timer.function = mux_poll; - mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); - -#ifdef CONFIG_SERIAL_MUX_CONSOLE - register_console(&mux_console); -#endif - } - - return 0; -} - -/** - * mux_exit - Serial MUX cleanup procedure. - * - * Unregister the Serial MUX driver from the tty layer. - */ -static void __exit mux_exit(void) -{ - /* Delete the Mux timer. */ - if(port_cnt > 0) { - del_timer(&mux_timer); -#ifdef CONFIG_SERIAL_MUX_CONSOLE - unregister_console(&mux_console); -#endif - } - - unregister_parisc_driver(&builtin_serial_mux_driver); - unregister_parisc_driver(&serial_mux_driver); - uart_unregister_driver(&mux_driver); -} - -module_init(mux_init); -module_exit(mux_exit); - -MODULE_AUTHOR("Ryan Bradetich"); -MODULE_DESCRIPTION("Serial MUX driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c deleted file mode 100644 index 7735c9f..0000000 --- a/drivers/serial/netx-serial.c +++ /dev/null @@ -1,750 +0,0 @@ -/* - * drivers/serial/netx-serial.c - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_NX_MAJOR 204 -#define MINOR_START 170 - -enum uart_regs { - UART_DR = 0x00, - UART_SR = 0x04, - UART_LINE_CR = 0x08, - UART_BAUDDIV_MSB = 0x0c, - UART_BAUDDIV_LSB = 0x10, - UART_CR = 0x14, - UART_FR = 0x18, - UART_IIR = 0x1c, - UART_ILPR = 0x20, - UART_RTS_CR = 0x24, - UART_RTS_LEAD = 0x28, - UART_RTS_TRAIL = 0x2c, - UART_DRV_ENABLE = 0x30, - UART_BRM_CR = 0x34, - UART_RXFIFO_IRQLEVEL = 0x38, - UART_TXFIFO_IRQLEVEL = 0x3c, -}; - -#define SR_FE (1<<0) -#define SR_PE (1<<1) -#define SR_BE (1<<2) -#define SR_OE (1<<3) - -#define LINE_CR_BRK (1<<0) -#define LINE_CR_PEN (1<<1) -#define LINE_CR_EPS (1<<2) -#define LINE_CR_STP2 (1<<3) -#define LINE_CR_FEN (1<<4) -#define LINE_CR_5BIT (0<<5) -#define LINE_CR_6BIT (1<<5) -#define LINE_CR_7BIT (2<<5) -#define LINE_CR_8BIT (3<<5) -#define LINE_CR_BITS_MASK (3<<5) - -#define CR_UART_EN (1<<0) -#define CR_SIREN (1<<1) -#define CR_SIRLP (1<<2) -#define CR_MSIE (1<<3) -#define CR_RIE (1<<4) -#define CR_TIE (1<<5) -#define CR_RTIE (1<<6) -#define CR_LBE (1<<7) - -#define FR_CTS (1<<0) -#define FR_DSR (1<<1) -#define FR_DCD (1<<2) -#define FR_BUSY (1<<3) -#define FR_RXFE (1<<4) -#define FR_TXFF (1<<5) -#define FR_RXFF (1<<6) -#define FR_TXFE (1<<7) - -#define IIR_MIS (1<<0) -#define IIR_RIS (1<<1) -#define IIR_TIS (1<<2) -#define IIR_RTIS (1<<3) -#define IIR_MASK 0xf - -#define RTS_CR_AUTO (1<<0) -#define RTS_CR_RTS (1<<1) -#define RTS_CR_COUNT (1<<2) -#define RTS_CR_MOD2 (1<<3) -#define RTS_CR_RTS_POL (1<<4) -#define RTS_CR_CTS_CTR (1<<5) -#define RTS_CR_CTS_POL (1<<6) -#define RTS_CR_STICK (1<<7) - -#define UART_PORT_SIZE 0x40 -#define DRIVER_NAME "netx-uart" - -struct netx_port { - struct uart_port port; -}; - -static void netx_stop_tx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_TIE, port->membase + UART_CR); -} - -static void netx_stop_rx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_RIE, port->membase + UART_CR); -} - -static void netx_enable_ms(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val | CR_MSIE, port->membase + UART_CR); -} - -static inline void netx_transmit_buffer(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - writel(port->x_char, port->membase + UART_DR); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - netx_stop_tx(port); - return; - } - - do { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], port->membase + UART_DR); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (!(readl(port->membase + UART_FR) & FR_TXFF)); - - if (uart_circ_empty(xmit)) - netx_stop_tx(port); -} - -static void netx_start_tx(struct uart_port *port) -{ - writel( - readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); - - if (!(readl(port->membase + UART_FR) & FR_TXFF)) - netx_transmit_buffer(port); -} - -static unsigned int netx_tx_empty(struct uart_port *port) -{ - return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; -} - -static void netx_txint(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - netx_stop_tx(port); - return; - } - - netx_transmit_buffer(port); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void netx_rxint(struct uart_port *port) -{ - unsigned char rx, flg, status; - struct tty_struct *tty = port->state->port.tty; - - while (!(readl(port->membase + UART_FR) & FR_RXFE)) { - rx = readl(port->membase + UART_DR); - flg = TTY_NORMAL; - port->icount.rx++; - status = readl(port->membase + UART_SR); - if (status & SR_BE) { - writel(0, port->membase + UART_SR); - if (uart_handle_break(port)) - continue; - } - - if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { - - if (status & SR_PE) - port->icount.parity++; - else if (status & SR_FE) - port->icount.frame++; - if (status & SR_OE) - port->icount.overrun++; - - status &= port->read_status_mask; - - if (status & SR_BE) - flg = TTY_BREAK; - else if (status & SR_PE) - flg = TTY_PARITY; - else if (status & SR_FE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, rx)) - continue; - - uart_insert_char(port, status, SR_OE, rx, flg); - } - - tty_flip_buffer_push(tty); - return; -} - -static irqreturn_t netx_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long flags; - unsigned char status; - - spin_lock_irqsave(&port->lock,flags); - - status = readl(port->membase + UART_IIR) & IIR_MASK; - while (status) { - if (status & IIR_RIS) - netx_rxint(port); - if (status & IIR_TIS) - netx_txint(port); - if (status & IIR_MIS) { - if (readl(port->membase + UART_FR) & FR_CTS) - uart_handle_cts_change(port, 1); - else - uart_handle_cts_change(port, 0); - } - writel(0, port->membase + UART_IIR); - status = readl(port->membase + UART_IIR) & IIR_MASK; - } - - spin_unlock_irqrestore(&port->lock,flags); - return IRQ_HANDLED; -} - -static unsigned int netx_get_mctrl(struct uart_port *port) -{ - unsigned int ret = TIOCM_DSR | TIOCM_CAR; - - if (readl(port->membase + UART_FR) & FR_CTS) - ret |= TIOCM_CTS; - - return ret; -} - -static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - /* FIXME: Locking needed ? */ - if (mctrl & TIOCM_RTS) { - val = readl(port->membase + UART_RTS_CR); - writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); - } -} - -static void netx_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int line_cr; - spin_lock_irq(&port->lock); - - line_cr = readl(port->membase + UART_LINE_CR); - if (break_state != 0) - line_cr |= LINE_CR_BRK; - else - line_cr &= ~LINE_CR_BRK; - writel(line_cr, port->membase + UART_LINE_CR); - - spin_unlock_irq(&port->lock); -} - -static int netx_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, netx_int, 0, - DRIVER_NAME, port); - if (ret) { - dev_err(port->dev, "unable to grab irq%d\n",port->irq); - goto exit; - } - - writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, - port->membase + UART_LINE_CR); - - writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, - port->membase + UART_CR); - -exit: - return ret; -} - -static void netx_shutdown(struct uart_port *port) -{ - writel(0, port->membase + UART_CR) ; - - free_irq(port->irq, port); -} - -static void -netx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud, quot; - unsigned char old_cr; - unsigned char line_cr = LINE_CR_FEN; - unsigned char rts_cr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS5: - line_cr |= LINE_CR_5BIT; - break; - case CS6: - line_cr |= LINE_CR_6BIT; - break; - case CS7: - line_cr |= LINE_CR_7BIT; - break; - case CS8: - line_cr |= LINE_CR_8BIT; - break; - } - - if (termios->c_cflag & CSTOPB) - line_cr |= LINE_CR_STP2; - - if (termios->c_cflag & PARENB) { - line_cr |= LINE_CR_PEN; - if (!(termios->c_cflag & PARODD)) - line_cr |= LINE_CR_EPS; - } - - if (termios->c_cflag & CRTSCTS) - rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = baud * 4096; - quot /= 1000; - quot *= 256; - quot /= 100000; - - spin_lock_irq(&port->lock); - - uart_update_timeout(port, termios->c_cflag, baud); - - old_cr = readl(port->membase + UART_CR); - - /* disable interrupts */ - writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), - port->membase + UART_CR); - - /* drain transmitter */ - while (readl(port->membase + UART_FR) & FR_BUSY); - - /* disable UART */ - writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); - - /* modem status interrupts */ - old_cr &= ~CR_MSIE; - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= CR_MSIE; - - writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); - writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); - writel(line_cr, port->membase + UART_LINE_CR); - - writel(rts_cr, port->membase + UART_RTS_CR); - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= SR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - } - - port->read_status_mask = 0; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SR_BE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= SR_PE | SR_FE; - - writel(old_cr, port->membase + UART_CR); - - spin_unlock_irq(&port->lock); -} - -static const char *netx_type(struct uart_port *port) -{ - return port->type == PORT_NETX ? "NETX" : NULL; -} - -static void netx_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -static int netx_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - DRIVER_NAME) != NULL ? 0 : -EBUSY; -} - -static void netx_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) - port->type = PORT_NETX; -} - -static int -netx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) - ret = -EINVAL; - - return ret; -} - -static struct uart_ops netx_pops = { - .tx_empty = netx_tx_empty, - .set_mctrl = netx_set_mctrl, - .get_mctrl = netx_get_mctrl, - .stop_tx = netx_stop_tx, - .start_tx = netx_start_tx, - .stop_rx = netx_stop_rx, - .enable_ms = netx_enable_ms, - .break_ctl = netx_break_ctl, - .startup = netx_startup, - .shutdown = netx_shutdown, - .set_termios = netx_set_termios, - .type = netx_type, - .release_port = netx_release_port, - .request_port = netx_request_port, - .config_port = netx_config_port, - .verify_port = netx_verify_port, -}; - -static struct netx_port netx_ports[] = { - { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART0), - .mapbase = NETX_PA_UART0, - .irq = NETX_IRQ_UART0, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 0, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART1), - .mapbase = NETX_PA_UART1, - .irq = NETX_IRQ_UART1, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 1, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART2), - .mapbase = NETX_PA_UART2, - .irq = NETX_IRQ_UART2, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 2, - }, - } -}; - -#ifdef CONFIG_SERIAL_NETX_CONSOLE - -static void netx_console_putchar(struct uart_port *port, int ch) -{ - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(ch, port->membase + UART_DR); -} - -static void -netx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &netx_ports[co->index].port; - unsigned char cr_save; - - cr_save = readl(port->membase + UART_CR); - writel(cr_save | CR_UART_EN, port->membase + UART_CR); - - uart_console_write(port, s, count, netx_console_putchar); - - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(cr_save, port->membase + UART_CR); -} - -static void __init -netx_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits, int *flow) -{ - unsigned char line_cr; - - *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | - readl(port->membase + UART_BAUDDIV_LSB); - *baud *= 1000; - *baud /= 4096; - *baud *= 1000; - *baud /= 256; - *baud *= 100; - - line_cr = readl(port->membase + UART_LINE_CR); - *parity = 'n'; - if (line_cr & LINE_CR_PEN) { - if (line_cr & LINE_CR_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - switch (line_cr & LINE_CR_BITS_MASK) { - case LINE_CR_8BIT: - *bits = 8; - break; - case LINE_CR_7BIT: - *bits = 7; - break; - case LINE_CR_6BIT: - *bits = 6; - break; - case LINE_CR_5BIT: - *bits = 5; - break; - } - - if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) - *flow = 'r'; -} - -static int __init -netx_console_setup(struct console *co, char *options) -{ - struct netx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) - co->index = 0; - sport = &netx_ports[co->index]; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - /* if the UART is enabled, assume it has been correctly setup - * by the bootloader and get the options - */ - if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { - netx_console_get_options(&sport->port, &baud, - &parity, &bits, &flow); - } - - } - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver netx_reg; -static struct console netx_console = { - .name = "ttyNX", - .write = netx_console_write, - .device = uart_console_device, - .setup = netx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &netx_reg, -}; - -static int __init netx_console_init(void) -{ - register_console(&netx_console); - return 0; -} -console_initcall(netx_console_init); - -#define NETX_CONSOLE &netx_console -#else -#define NETX_CONSOLE NULL -#endif - -static struct uart_driver netx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = "ttyNX", - .major = SERIAL_NX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(netx_ports), - .cons = NETX_CONSOLE, -}; - -static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_suspend_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_resume(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_resume_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_probe(struct platform_device *pdev) -{ - struct uart_port *port = &netx_ports[pdev->id].port; - - dev_info(&pdev->dev, "initialising\n"); - - port->dev = &pdev->dev; - - writel(1, port->membase + UART_RXFIFO_IRQLEVEL); - uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); - platform_set_drvdata(pdev, &netx_ports[pdev->id]); - - return 0; -} - -static int serial_netx_remove(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&netx_reg, &sport->port); - - return 0; -} - -static struct platform_driver serial_netx_driver = { - .probe = serial_netx_probe, - .remove = serial_netx_remove, - - .suspend = serial_netx_suspend, - .resume = serial_netx_resume, - - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init netx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: NetX driver\n"); - - ret = uart_register_driver(&netx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_netx_driver); - if (ret != 0) - uart_unregister_driver(&netx_reg); - - return 0; -} - -static void __exit netx_serial_exit(void) -{ - platform_driver_unregister(&serial_netx_driver); - uart_unregister_driver(&netx_reg); -} - -module_init(netx_serial_init); -module_exit(netx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("NetX serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c deleted file mode 100644 index de17367..0000000 --- a/drivers/serial/nwpserial.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NWPSERIAL_NR 2 - -#define NWPSERIAL_STATUS_RXVALID 0x1 -#define NWPSERIAL_STATUS_TXFULL 0x2 - -struct nwpserial_port { - struct uart_port port; - dcr_host_t dcr_host; - unsigned int ier; - unsigned int mcr; -}; - -static DEFINE_MUTEX(nwpserial_mutex); -static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; - -static void wait_for_bits(struct nwpserial_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = dcr_read(up->dcr_host, UART_LSR); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); -} - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static void nwpserial_console_putchar(struct uart_port *port, int c) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void -nwpserial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct nwpserial_port *up = &nwpserial_ports[co->index]; - unsigned long flags; - int locked = 1; - - if (oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); - else - spin_lock_irqsave(&up->port.lock, flags); - - /* save and disable interrupt */ - up->ier = dcr_read(up->dcr_host, UART_IER); - dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); - - uart_console_write(&up->port, s, count, nwpserial_console_putchar); - - /* wait for transmitter to become empty */ - while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) - cpu_relax(); - - /* restore interrupt state */ - dcr_write(up->dcr_host, UART_IER, up->ier); - - if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver nwpserial_reg; -static struct console nwpserial_console = { - .name = "ttySQ", - .write = nwpserial_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &nwpserial_reg, -}; -#define NWPSERIAL_CONSOLE (&nwpserial_console) -#else -#define NWPSERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ - -/**************************************************************************/ - -static int nwpserial_request_port(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_release_port(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_NWPSERIAL; -} - -static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) -{ - struct nwpserial_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - irqreturn_t ret; - unsigned int iir; - unsigned char ch; - - spin_lock(&up->port.lock); - - /* check if the uart was the interrupt source. */ - iir = dcr_read(up->dcr_host, UART_IIR); - if (!iir) { - ret = IRQ_NONE; - goto out; - } - - do { - up->port.icount.rx++; - ch = dcr_read(up->dcr_host, UART_RX); - if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); - - tty_flip_buffer_push(tty); - ret = IRQ_HANDLED; - - /* clear interrupt */ - dcr_write(up->dcr_host, UART_IIR, 1); -out: - spin_unlock(&up->port.lock); - return ret; -} - -static int nwpserial_startup(struct uart_port *port) -{ - struct nwpserial_port *up; - int err; - - up = container_of(port, struct nwpserial_port, port); - - /* disable flow control by default */ - up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; - dcr_write(up->dcr_host, UART_MCR, up->mcr); - - /* register interrupt handler */ - err = request_irq(up->port.irq, nwpserial_interrupt, - IRQF_SHARED, "nwpserial", up); - if (err) - return err; - - /* enable interrupts */ - up->ier = UART_IER_RDI; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* enable receiving */ - up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; - - return 0; -} - -static void nwpserial_shutdown(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - /* disable receiving */ - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* disable interrupts from this port */ - up->ier = 0; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* free irq */ - free_irq(up->port.irq, port); -} - -static int nwpserial_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char *nwpserial_type(struct uart_port *port) -{ - return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; -} - -static void nwpserial_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID - | NWPSERIAL_STATUS_TXFULL; - - up->port.ignore_status_mask = 0; - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* Copy back the old hardware settings */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void nwpserial_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static void nwpserial_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_stop_rx(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* don't forward any more data (like !CREAD) */ - up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; -} - -static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) -{ - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void nwpserial_start_tx(struct uart_port *port) -{ - struct nwpserial_port *up; - struct circ_buf *xmit; - up = container_of(port, struct nwpserial_port, port); - xmit = &up->port.state->xmit; - - if (port->x_char) { - nwpserial_putchar(up, up->port.x_char); - port->x_char = 0; - } - - while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { - nwpserial_putchar(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - } -} - -static unsigned int nwpserial_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void nwpserial_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static unsigned int nwpserial_tx_empty(struct uart_port *port) -{ - struct nwpserial_port *up; - unsigned long flags; - int ret; - up = container_of(port, struct nwpserial_port, port); - - spin_lock_irqsave(&up->port.lock, flags); - ret = dcr_read(up->dcr_host, UART_LSR); - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; -} - -static struct uart_ops nwpserial_pops = { - .tx_empty = nwpserial_tx_empty, - .set_mctrl = nwpserial_set_mctrl, - .get_mctrl = nwpserial_get_mctrl, - .stop_tx = nwpserial_stop_tx, - .start_tx = nwpserial_start_tx, - .stop_rx = nwpserial_stop_rx, - .enable_ms = nwpserial_enable_ms, - .break_ctl = nwpserial_break_ctl, - .startup = nwpserial_startup, - .shutdown = nwpserial_shutdown, - .set_termios = nwpserial_set_termios, - .type = nwpserial_type, - .release_port = nwpserial_release_port, - .request_port = nwpserial_request_port, - .config_port = nwpserial_config_port, - .verify_port = nwpserial_verify_port, -}; - -static struct uart_driver nwpserial_reg = { - .owner = THIS_MODULE, - .driver_name = "nwpserial", - .dev_name = "ttySQ", - .major = TTY_MAJOR, - .minor = 68, - .nr = NWPSERIAL_NR, - .cons = NWPSERIAL_CONSOLE, -}; - -int nwpserial_register_port(struct uart_port *port) -{ - struct nwpserial_port *up = NULL; - int ret = -1; - int i; - static int first = 1; - int dcr_len; - int dcr_base; - struct device_node *dn; - - mutex_lock(&nwpserial_mutex); - - dn = port->dev->of_node; - if (dn == NULL) - goto out; - - /* get dcr base. */ - dcr_base = dcr_resource_start(dn, 0); - - /* find matching entry */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.iobase == dcr_base) { - up = &nwpserial_ports[i]; - break; - } - - /* we didn't find a mtching entry, search for a free port */ - if (up == NULL) - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN && - nwpserial_ports[i].port.iobase == 0) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) { - ret = -EBUSY; - goto out; - } - - if (first) - uart_register_driver(&nwpserial_reg); - first = 0; - - up->port.membase = port->membase; - up->port.irq = port->irq; - up->port.uartclk = port->uartclk; - up->port.fifosize = port->fifosize; - up->port.regshift = port->regshift; - up->port.iotype = port->iotype; - up->port.flags = port->flags; - up->port.mapbase = port->mapbase; - up->port.private_data = port->private_data; - - if (port->dev) - up->port.dev = port->dev; - - if (up->port.iobase != dcr_base) { - up->port.ops = &nwpserial_pops; - up->port.fifosize = 16; - - spin_lock_init(&up->port.lock); - - up->port.iobase = dcr_base; - dcr_len = dcr_resource_len(dn, 0); - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); - goto out; - } - } - - ret = uart_add_one_port(&nwpserial_reg, &up->port); - if (ret == 0) - ret = up->port.line; - -out: - mutex_unlock(&nwpserial_mutex); - - return ret; -} -EXPORT_SYMBOL(nwpserial_register_port); - -void nwpserial_unregister_port(int line) -{ - struct nwpserial_port *up = &nwpserial_ports[line]; - mutex_lock(&nwpserial_mutex); - uart_remove_one_port(&nwpserial_reg, &up->port); - - up->port.type = PORT_UNKNOWN; - - mutex_unlock(&nwpserial_mutex); -} -EXPORT_SYMBOL(nwpserial_unregister_port); - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static int __init nwpserial_console_init(void) -{ - struct nwpserial_port *up = NULL; - struct device_node *dn; - const char *name; - int dcr_base; - int dcr_len; - int i; - - /* search for a free port */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) - return -1; - - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return -1; - - dn = of_find_node_by_path(name); - if (!dn) - return -1; - - spin_lock_init(&up->port.lock); - up->port.ops = &nwpserial_pops; - up->port.type = PORT_NWPSERIAL; - up->port.fifosize = 16; - - dcr_base = dcr_resource_start(dn, 0); - dcr_len = dcr_resource_len(dn, 0); - up->port.iobase = dcr_base; - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk("Cannot map DCR resources for SERIAL"); - return -1; - } - register_console(&nwpserial_console); - return 0; -} -console_initcall(nwpserial_console_init); -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c deleted file mode 100644 index 5c7abe4..0000000 --- a/drivers/serial/of_serial.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Serial Port driver for Open Firmware platform devices - * - * Copyright (C) 2006 Arnd Bergmann , IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct of_serial_info { - int type; - int line; -}; - -/* - * Fill a struct uart_port for a given device node - */ -static int __devinit of_platform_serial_setup(struct platform_device *ofdev, - int type, struct uart_port *port) -{ - struct resource resource; - struct device_node *np = ofdev->dev.of_node; - const __be32 *clk, *spd; - const __be32 *prop; - int ret, prop_size; - - memset(port, 0, sizeof *port); - spd = of_get_property(np, "current-speed", NULL); - clk = of_get_property(np, "clock-frequency", NULL); - if (!clk) { - dev_warn(&ofdev->dev, "no clock-frequency property set\n"); - return -ENODEV; - } - - ret = of_address_to_resource(np, 0, &resource); - if (ret) { - dev_warn(&ofdev->dev, "invalid address\n"); - return ret; - } - - spin_lock_init(&port->lock); - port->mapbase = resource.start; - - /* Check for shifted address mapping */ - prop = of_get_property(np, "reg-offset", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->mapbase += be32_to_cpup(prop); - - /* Check for registers offset within the devices address range */ - prop = of_get_property(np, "reg-shift", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->regshift = be32_to_cpup(prop); - - port->irq = irq_of_parse_and_map(np, 0); - port->iotype = UPIO_MEM; - port->type = type; - port->uartclk = be32_to_cpup(clk); - port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP - | UPF_FIXED_PORT | UPF_FIXED_TYPE; - port->dev = &ofdev->dev; - /* If current-speed was set, then try not to change it. */ - if (spd) - port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); - - return 0; -} - -/* - * Try to register a serial port - */ -static int __devinit of_platform_serial_probe(struct platform_device *ofdev, - const struct of_device_id *id) -{ - struct of_serial_info *info; - struct uart_port port; - int port_type; - int ret; - - if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) - return -EBUSY; - - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (info == NULL) - return -ENOMEM; - - port_type = (unsigned long)id->data; - ret = of_platform_serial_setup(ofdev, port_type, &port); - if (ret) - goto out; - - switch (port_type) { -#ifdef CONFIG_SERIAL_8250 - case PORT_8250 ... PORT_MAX_8250: - ret = serial8250_register_port(&port); - break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - ret = nwpserial_register_port(&port); - break; -#endif - default: - /* need to add code for these */ - case PORT_UNKNOWN: - dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); - ret = -ENODEV; - break; - } - if (ret < 0) - goto out; - - info->type = port_type; - info->line = ret; - dev_set_drvdata(&ofdev->dev, info); - return 0; -out: - kfree(info); - irq_dispose_mapping(port.irq); - return ret; -} - -/* - * Release a line - */ -static int of_platform_serial_remove(struct platform_device *ofdev) -{ - struct of_serial_info *info = dev_get_drvdata(&ofdev->dev); - switch (info->type) { -#ifdef CONFIG_SERIAL_8250 - case PORT_8250 ... PORT_MAX_8250: - serial8250_unregister_port(info->line); - break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - nwpserial_unregister_port(info->line); - break; -#endif - default: - /* need to add code for these */ - break; - } - kfree(info); - return 0; -} - -/* - * A few common types, add more as needed. - */ -static struct of_device_id __devinitdata of_platform_serial_table[] = { - { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, - { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, - { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, - { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, - { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, - { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .type = "serial", .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, -#endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, - { /* end of list */ }, -}; - -static struct of_platform_driver of_platform_serial_driver = { - .driver = { - .name = "of_serial", - .owner = THIS_MODULE, - .of_match_table = of_platform_serial_table, - }, - .probe = of_platform_serial_probe, - .remove = of_platform_serial_remove, -}; - -static int __init of_platform_serial_init(void) -{ - return of_register_platform_driver(&of_platform_serial_driver); -} -module_init(of_platform_serial_init); - -static void __exit of_platform_serial_exit(void) -{ - return of_unregister_platform_driver(&of_platform_serial_driver); -}; -module_exit(of_platform_serial_exit); - -MODULE_AUTHOR("Arnd Bergmann "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c deleted file mode 100644 index 7f2f010..0000000 --- a/drivers/serial/omap-serial.c +++ /dev/null @@ -1,1359 +0,0 @@ -/* - * Driver for OMAP-UART controller. - * Based on drivers/serial/8250.c - * - * Copyright (C) 2010 Texas Instruments. - * - * Authors: - * Govindraj R - * Thara Gopinath - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Note: This driver is made seperate from 8250 driver as we cannot - * over load 8250 driver with omap platform specific configuration for - * features like DMA, it makes easier to implement features like DMA and - * hardware flow control and software flow control configuration with - * this driver as required for the omap-platform. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; - -/* Forward declaration of functions */ -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rx_timeout(unsigned long uart_no); -static int serial_omap_start_rxdma(struct uart_omap_port *up); - -static inline unsigned int serial_in(struct uart_omap_port *up, int offset) -{ - offset <<= up->port.regshift; - return readw(up->port.membase + offset); -} - -static inline void serial_out(struct uart_omap_port *up, int offset, int value) -{ - offset <<= up->port.regshift; - writew(value, up->port.membase + offset); -} - -static inline void serial_omap_clear_fifos(struct uart_omap_port *up) -{ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -/* - * serial_omap_get_divisor - calculate divisor value - * @port: uart port info - * @baud: baudrate for which divisor needs to be calculated. - * - * We have written our own function to get the divisor so as to support - * 13x mode. 3Mbps Baudrate as an different divisor. - * Reference OMAP TRM Chapter 17: - * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates - * referring to oversampling - divisor value - * baudrate 460,800 to 3,686,400 all have divisor 13 - * except 3,000,000 which has divisor value 16 - */ -static unsigned int -serial_omap_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int divisor; - - if (baud > OMAP_MODE13X_SPEED && baud != 3000000) - divisor = 13; - else - divisor = 16; - return port->uartclk/(baud * divisor); -} - -static void serial_omap_stop_rxdma(struct uart_omap_port *up) -{ - if (up->uart_dma.rx_dma_used) { - del_timer(&up->uart_dma.rx_timer); - omap_stop_dma(up->uart_dma.rx_dma_channel); - omap_free_dma(up->uart_dma.rx_dma_channel); - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_used = false; - } -} - -static void serial_omap_enable_ms(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void serial_omap_stop_tx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - if (up->use_dma && - up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { - /* - * Check if dma is still active. If yes do nothing, - * return. Else stop dma - */ - if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) - return; - omap_stop_dma(up->uart_dma.tx_dma_channel); - omap_free_dma(up->uart_dma.tx_dma_channel); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - } - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_omap_stop_rx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - if (up->use_dma) - serial_omap_stop_rxdma(up); - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static inline void receive_chars(struct uart_omap_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag; - unsigned char ch, lsr = *status; - int max_count = 256; - - do { - if (likely(lsr & UART_LSR_DR)) - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (lsr & UART_LSR_PE) { - up->port.icount.parity++; - } else if (lsr & UART_LSR_FE) { - up->port.icount.frame++; - } - - if (lsr & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - lsr &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_OMAP_CONSOLE - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (lsr & UART_LSR_BI) - flag = TTY_BREAK; - else if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - else if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); -ignore_char: - lsr = serial_in(up, UART_LSR); - } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); -} - -static void transmit_chars(struct uart_omap_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_omap_stop_tx(&up->port); - return; - } - count = up->port.fifosize / 4; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_omap_stop_tx(&up->port); -} - -static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) -{ - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_omap_start_tx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - struct circ_buf *xmit; - unsigned int start; - int ret = 0; - - if (!up->use_dma) { - serial_omap_enable_ier_thri(up); - return; - } - - if (up->uart_dma.tx_dma_used) - return; - - xmit = &up->port.state->xmit; - - if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { - ret = omap_request_dma(up->uart_dma.uart_dma_tx, - "UART Tx DMA", - (void *)uart_tx_dma_callback, up, - &(up->uart_dma.tx_dma_channel)); - - if (ret < 0) { - serial_omap_enable_ier_thri(up); - return; - } - } - spin_lock(&(up->uart_dma.tx_lock)); - up->uart_dma.tx_dma_used = true; - spin_unlock(&(up->uart_dma.tx_lock)); - - start = up->uart_dma.tx_buf_dma_phys + - (xmit->tail & (UART_XMIT_SIZE - 1)); - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + - UART_XMIT_SIZE) - start; - - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); -} - -static unsigned int check_modem_status(struct uart_omap_port *up) -{ - unsigned int status; - - status = serial_in(up, UART_MSR); - status |= up->msr_saved_flags; - up->msr_saved_flags = 0; - if ((status & UART_MSR_ANY_DELTA) == 0) - return status; - - if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change - (&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change - (&up->port, status & UART_MSR_CTS); - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - return status; -} - -/** - * serial_omap_irq() - This handles the interrupt from one port - * @irq: uart port irq number - * @dev_id: uart port info - */ -static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) -{ - struct uart_omap_port *up = dev_id; - unsigned int iir, lsr; - unsigned long flags; - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - if (iir & UART_IIR_RLSI) { - if (!up->use_dma) { - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - } else { - up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - if ((serial_omap_start_rxdma(up) != 0) && - (lsr & UART_LSR_DR)) - receive_chars(up, &lsr); - } - } - - check_modem_status(up); - if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - up->port_activity = jiffies; - return IRQ_HANDLED; -} - -static unsigned int serial_omap_tx_empty(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - unsigned int ret = 0; - - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_omap_get_mctrl(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char status; - unsigned int ret = 0; - - status = check_modem_status(up); - dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); - - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char mcr = 0; - - dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); -} - -static void serial_omap_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - - dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int serial_omap_startup(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, - up->name, up); - if (retval) - return retval; - - dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_omap_clear_fifos(up); - /* For Hardware flow control */ - serial_out(up, UART_MCR, UART_MCR_RTS); - - /* - * Clear the interrupt registers. - */ - (void) serial_in(up, UART_LSR); - if (serial_in(up, UART_LSR) & UART_LSR_DR) - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - spin_lock_irqsave(&up->port.lock, flags); - /* - * Most PC uarts need OUT2 raised to enable interrupts. - */ - up->port.mctrl |= TIOCM_OUT2; - serial_omap_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - up->msr_saved_flags = 0; - if (up->use_dma) { - free_page((unsigned long)up->port.state->xmit.buf); - up->port.state->xmit.buf = dma_alloc_coherent(NULL, - UART_XMIT_SIZE, - (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), - 0); - init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rx_timeout; - up->uart_dma.rx_timer.data = up->pdev->id; - /* Currently the buffer size is 4KB. Can increase it */ - up->uart_dma.rx_buf = dma_alloc_coherent(NULL, - up->uart_dma.rx_buf_size, - (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); - } - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_out(up, UART_IER, up->ier); - - up->port_activity = jiffies; - return 0; -} - -static void serial_omap_shutdown(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - - dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_out(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_omap_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_omap_clear_fifos(up); - - /* - * Read data port to reset things, and then free the irq - */ - if (serial_in(up, UART_LSR) & UART_LSR_DR) - (void) serial_in(up, UART_RX); - if (up->use_dma) { - dma_free_coherent(up->port.dev, - UART_XMIT_SIZE, up->port.state->xmit.buf, - up->uart_dma.tx_buf_dma_phys); - up->port.state->xmit.buf = NULL; - serial_omap_stop_rx(port); - dma_free_coherent(up->port.dev, - up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, - up->uart_dma.rx_buf_dma_phys); - up->uart_dma.rx_buf = NULL; - } - free_irq(up->port.irq, up); -} - -static inline void -serial_omap_configure_xonxoff - (struct uart_omap_port *up, struct ktermios *termios) -{ - unsigned char efr = 0; - - up->lcr = serial_in(up, UART_LCR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); - - serial_out(up, UART_XON1, termios->c_cc[VSTART]); - serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); - - /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; - - /* - * IXON Flag: - * Enable XON/XOFF flow control on output. - * Transmit XON1, XOFF1 - */ - if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; - - /* - * IXOFF Flag: - * Enable XON/XOFF flow control on input. - * Receiver compares XON1, XOFF1. - */ - if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; - - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - up->mcr = serial_in(up, UART_MCR); - - /* - * IXANY Flag: - * Enable any character to restart output. - * Operation resumes after receiving any - * character after recognition of the XOFF character - */ - if (termios->c_iflag & IXANY) - up->mcr |= UART_MCR_XONANY; - - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - /* Enable special char function UARTi.EFR_REG[5] and - * load the new software flow control mode IXON or IXOFF - * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. - */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); - serial_out(up, UART_LCR, up->lcr); -} - -static void -serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char cval = 0; - unsigned char efr = 0; - unsigned long flags = 0; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * Ask the core to calculate the divisor for us. - */ - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); - quot = serial_omap_get_divisor(port, baud); - - up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | - UART_FCR_ENABLE_FIFO; - if (up->use_dma) - up->fcr |= UART_FCR_DMA_SELECT; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characters to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * Modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_LCR, cval); /* reset DLAB */ - - /* FIFOs and DMA Settings */ - - /* FCR can be changed only when the - * baud clock is not running - * DLL_REG and DLH_REG set to 0. - */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_DLL, 0); - serial_out(up, UART_DLM, 0); - serial_out(up, UART_LCR, 0); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - up->mcr = serial_in(up, UART_MCR); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - /* FIFO ENABLE, DMA MODE */ - serial_out(up, UART_FCR, up->fcr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - if (up->use_dma) { - serial_out(up, UART_TI752_TLR, 0); - serial_out(up, UART_OMAP_SCR, - (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); - } - - serial_out(up, UART_EFR, up->efr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr); - - /* Protocol, Baud Rate, and Interrupt Settings */ - - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_LCR, 0); - serial_out(up, UART_IER, 0); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - - serial_out(up, UART_LCR, 0); - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - serial_out(up, UART_EFR, up->efr); - serial_out(up, UART_LCR, cval); - - if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); - else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); - - /* Hardware Flow Control Configuration */ - - if (termios->c_cflag & CRTSCTS) { - efr |= (UART_EFR_CTS | UART_EFR_RTS); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - up->mcr = serial_in(up, UART_MCR); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS); - serial_out(up, UART_LCR, cval); - } - - serial_omap_set_mctrl(&up->port, up->port.mctrl); - /* Software Flow Control Configuration */ - if (termios->c_iflag & (IXON | IXOFF)) - serial_omap_configure_xonxoff(up, termios); - - spin_unlock_irqrestore(&up->port.lock, flags); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); -} - -static void -serial_omap_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char efr; - - dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, efr | UART_EFR_ECB); - serial_out(up, UART_LCR, 0); - - serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, efr); - serial_out(up, UART_LCR, 0); - /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, - (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); -} - -static void serial_omap_release_port(struct uart_port *port) -{ - dev_dbg(port->dev, "serial_omap_release_port+\n"); -} - -static int serial_omap_request_port(struct uart_port *port) -{ - dev_dbg(port->dev, "serial_omap_request_port+\n"); - return 0; -} - -static void serial_omap_config_port(struct uart_port *port, int flags) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); - up->port.type = PORT_OMAP; -} - -static int -serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - dev_dbg(port->dev, "serial_omap_verify_port+\n"); - return -EINVAL; -} - -static const char * -serial_omap_type(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); - return up->name; -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void wait_for_xmitr(struct uart_omap_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - for (tmout = 1000000; tmout; tmout--) { - unsigned int msr = serial_in(up, UART_MSR); - - up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; - if (msr & UART_MSR_CTS) - break; - - udelay(1); - } - } -} - -#ifdef CONFIG_CONSOLE_POLL - -static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -static int serial_omap_poll_get_char(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned int status = serial_in(up, UART_LSR); - - if (!(status & UART_LSR_DR)) - return NO_POLL_CHAR; - - return serial_in(up, UART_RX); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -#ifdef CONFIG_SERIAL_OMAP_CONSOLE - -static struct uart_omap_port *serial_omap_console_ports[4]; - -static struct uart_driver serial_omap_reg; - -static void serial_omap_console_putchar(struct uart_port *port, int ch) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -static void -serial_omap_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_omap_port *up = serial_omap_console_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) - locked = spin_trylock(&up->port.lock); - else - spin_lock(&up->port.lock); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial_omap_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - /* - * The receive handling will happen properly because the - * receive ready bit will still be set; it is not cleared - * on read. However, modem control will not, we must - * call it if we have saved something in the saved flags - * while processing with interrupts off. - */ - if (up->msr_saved_flags) - check_modem_status(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init -serial_omap_console_setup(struct console *co, char *options) -{ - struct uart_omap_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (serial_omap_console_ports[co->index] == NULL) - return -ENODEV; - up = serial_omap_console_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console serial_omap_console = { - .name = OMAP_SERIAL_NAME, - .write = serial_omap_console_write, - .device = uart_console_device, - .setup = serial_omap_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_omap_reg, -}; - -static void serial_omap_add_console_port(struct uart_omap_port *up) -{ - serial_omap_console_ports[up->pdev->id] = up; -} - -#define OMAP_CONSOLE (&serial_omap_console) - -#else - -#define OMAP_CONSOLE NULL - -static inline void serial_omap_add_console_port(struct uart_omap_port *up) -{} - -#endif - -static struct uart_ops serial_omap_pops = { - .tx_empty = serial_omap_tx_empty, - .set_mctrl = serial_omap_set_mctrl, - .get_mctrl = serial_omap_get_mctrl, - .stop_tx = serial_omap_stop_tx, - .start_tx = serial_omap_start_tx, - .stop_rx = serial_omap_stop_rx, - .enable_ms = serial_omap_enable_ms, - .break_ctl = serial_omap_break_ctl, - .startup = serial_omap_startup, - .shutdown = serial_omap_shutdown, - .set_termios = serial_omap_set_termios, - .pm = serial_omap_pm, - .type = serial_omap_type, - .release_port = serial_omap_release_port, - .request_port = serial_omap_request_port, - .config_port = serial_omap_config_port, - .verify_port = serial_omap_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = serial_omap_poll_put_char, - .poll_get_char = serial_omap_poll_get_char, -#endif -}; - -static struct uart_driver serial_omap_reg = { - .owner = THIS_MODULE, - .driver_name = "OMAP-SERIAL", - .dev_name = OMAP_SERIAL_NAME, - .nr = OMAP_MAX_HSUART_PORTS, - .cons = OMAP_CONSOLE, -}; - -static int -serial_omap_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct uart_omap_port *up = platform_get_drvdata(pdev); - - if (up) - uart_suspend_port(&serial_omap_reg, &up->port); - return 0; -} - -static int serial_omap_resume(struct platform_device *dev) -{ - struct uart_omap_port *up = platform_get_drvdata(dev); - - if (up) - uart_resume_port(&serial_omap_reg, &up->port); - return 0; -} - -static void serial_omap_rx_timeout(unsigned long uart_no) -{ - struct uart_omap_port *up = ui[uart_no]; - unsigned int curr_dma_pos, curr_transmitted_size; - int ret = 0; - - curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); - if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || - (curr_dma_pos == 0)) { - if (jiffies_to_msecs(jiffies - up->port_activity) < - RX_TIMEOUT) { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - } else { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - return; - } - - curr_transmitted_size = curr_dma_pos - - up->uart_dma.prev_rx_dma_pos; - up->port.icount.rx += curr_transmitted_size; - tty_insert_flip_string(up->port.state->port.tty, - up->uart_dma.rx_buf + - (up->uart_dma.prev_rx_dma_pos - - up->uart_dma.rx_buf_dma_phys), - curr_transmitted_size); - tty_flip_buffer_push(up->port.state->port.tty); - up->uart_dma.prev_rx_dma_pos = curr_dma_pos; - if (up->uart_dma.rx_buf_size + - up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { - ret = serial_omap_start_rxdma(up); - if (ret < 0) { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - } else { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - } - up->port_activity = jiffies; -} - -static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) -{ - return; -} - -static int serial_omap_start_rxdma(struct uart_omap_port *up) -{ - int ret = 0; - - if (up->uart_dma.rx_dma_channel == -1) { - ret = omap_request_dma(up->uart_dma.uart_dma_rx, - "UART Rx DMA", - (void *)uart_rx_dma_callback, up, - &(up->uart_dma.rx_dma_channel)); - if (ret < 0) - return ret; - - omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, - up->uart_dma.rx_buf_dma_phys, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.rx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_rx, 0); - } - up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.rx_dma_channel); - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - up->uart_dma.rx_dma_used = true; - return ret; -} - -static void serial_omap_continue_tx(struct uart_omap_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - unsigned int start = up->uart_dma.tx_buf_dma_phys - + (xmit->tail & (UART_XMIT_SIZE - 1)); - - if (uart_circ_empty(xmit)) - return; - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); -} - -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct uart_omap_port *up = (struct uart_omap_port *)data; - struct circ_buf *xmit = &up->port.state->xmit; - - xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ - (UART_XMIT_SIZE - 1); - up->port.icount.tx += up->uart_dma.tx_buf_size; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) { - spin_lock(&(up->uart_dma.tx_lock)); - serial_omap_stop_tx(&up->port); - up->uart_dma.tx_dma_used = false; - spin_unlock(&(up->uart_dma.tx_lock)); - } else { - omap_stop_dma(up->uart_dma.tx_dma_channel); - serial_omap_continue_tx(up); - } - up->port_activity = jiffies; - return; -} - -static int serial_omap_probe(struct platform_device *pdev) -{ - struct uart_omap_port *up; - struct resource *mem, *irq, *dma_tx, *dma_rx; - struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; - int ret = -ENOSPC; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } - - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { - dev_err(&pdev->dev, "no irq resource?\n"); - return -ENODEV; - } - - if (!request_mem_region(mem->start, (mem->end - mem->start) + 1, - pdev->dev.driver->name)) { - dev_err(&pdev->dev, "memory region already claimed\n"); - return -EBUSY; - } - - dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) { - ret = -EINVAL; - goto err; - } - - dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) { - ret = -EINVAL; - goto err; - } - - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (up == NULL) { - ret = -ENOMEM; - goto do_release_region; - } - sprintf(up->name, "OMAP UART%d", pdev->id); - up->pdev = pdev; - up->port.dev = &pdev->dev; - up->port.type = PORT_OMAP; - up->port.iotype = UPIO_MEM; - up->port.irq = irq->start; - - up->port.regshift = 2; - up->port.fifosize = 64; - up->port.ops = &serial_omap_pops; - up->port.line = pdev->id; - - up->port.membase = omap_up_info->membase; - up->port.mapbase = omap_up_info->mapbase; - up->port.flags = omap_up_info->flags; - up->port.irqflags = omap_up_info->irqflags; - up->port.uartclk = omap_up_info->uartclk; - up->uart_dma.uart_base = mem->start; - - if (omap_up_info->dma_enabled) { - up->uart_dma.uart_dma_tx = dma_tx->start; - up->uart_dma.uart_dma_rx = dma_rx->start; - up->use_dma = 1; - up->uart_dma.rx_buf_size = 4096; - up->uart_dma.rx_timeout = 2; - spin_lock_init(&(up->uart_dma.tx_lock)); - spin_lock_init(&(up->uart_dma.rx_lock)); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - } - - ui[pdev->id] = up; - serial_omap_add_console_port(up); - - ret = uart_add_one_port(&serial_omap_reg, &up->port); - if (ret != 0) - goto do_release_region; - - platform_set_drvdata(pdev, up); - return 0; -err: - dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", - pdev->id, __func__, ret); -do_release_region: - release_mem_region(mem->start, (mem->end - mem->start) + 1); - return ret; -} - -static int serial_omap_remove(struct platform_device *dev) -{ - struct uart_omap_port *up = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - if (up) { - uart_remove_one_port(&serial_omap_reg, &up->port); - kfree(up); - } - return 0; -} - -static struct platform_driver serial_omap_driver = { - .probe = serial_omap_probe, - .remove = serial_omap_remove, - - .suspend = serial_omap_suspend, - .resume = serial_omap_resume, - .driver = { - .name = DRIVER_NAME, - }, -}; - -static int __init serial_omap_init(void) -{ - int ret; - - ret = uart_register_driver(&serial_omap_reg); - if (ret != 0) - return ret; - ret = platform_driver_register(&serial_omap_driver); - if (ret != 0) - uart_unregister_driver(&serial_omap_reg); - return ret; -} - -static void __exit serial_omap_exit(void) -{ - platform_driver_unregister(&serial_omap_driver); - uart_unregister_driver(&serial_omap_reg); -} - -module_init(serial_omap_init); -module_exit(serial_omap_exit); - -MODULE_DESCRIPTION("OMAP High Speed UART driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c deleted file mode 100644 index 70a6145..0000000 --- a/drivers/serial/pch_uart.c +++ /dev/null @@ -1,1451 +0,0 @@ -/* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. - * - *This program is free software; you can redistribute it and/or modify - *it under the terms of the GNU General Public License as published by - *the Free Software Foundation; version 2 of the License. - * - *This program is distributed in the hope that it will be useful, - *but WITHOUT ANY WARRANTY; without even the implied warranty of - *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - *GNU General Public License for more details. - * - *You should have received a copy of the GNU General Public License - *along with this program; if not, write to the Free Software - *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -enum { - PCH_UART_HANDLED_RX_INT_SHIFT, - PCH_UART_HANDLED_TX_INT_SHIFT, - PCH_UART_HANDLED_RX_ERR_INT_SHIFT, - PCH_UART_HANDLED_RX_TRG_INT_SHIFT, - PCH_UART_HANDLED_MS_INT_SHIFT, -}; - -enum { - PCH_UART_8LINE, - PCH_UART_2LINE, -}; - -#define PCH_UART_DRIVER_DEVICE "ttyPCH" - -#define PCH_UART_NR_GE_256FIFO 1 -#define PCH_UART_NR_GE_64FIFO 3 -#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) -#define PCH_UART_NR PCH_UART_NR_GE - -#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ - PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ - PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) - -#define PCH_UART_RBR 0x00 -#define PCH_UART_THR 0x00 - -#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ - PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) -#define PCH_UART_IER_ERBFI 0x00000001 -#define PCH_UART_IER_ETBEI 0x00000002 -#define PCH_UART_IER_ELSI 0x00000004 -#define PCH_UART_IER_EDSSI 0x00000008 - -#define PCH_UART_IIR_IP 0x00000001 -#define PCH_UART_IIR_IID 0x00000006 -#define PCH_UART_IIR_MSI 0x00000000 -#define PCH_UART_IIR_TRI 0x00000002 -#define PCH_UART_IIR_RRI 0x00000004 -#define PCH_UART_IIR_REI 0x00000006 -#define PCH_UART_IIR_TOI 0x00000008 -#define PCH_UART_IIR_FIFO256 0x00000020 -#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 -#define PCH_UART_IIR_FE 0x000000C0 - -#define PCH_UART_FCR_FIFOE 0x00000001 -#define PCH_UART_FCR_RFR 0x00000002 -#define PCH_UART_FCR_TFR 0x00000004 -#define PCH_UART_FCR_DMS 0x00000008 -#define PCH_UART_FCR_FIFO256 0x00000020 -#define PCH_UART_FCR_RFTL 0x000000C0 - -#define PCH_UART_FCR_RFTL1 0x00000000 -#define PCH_UART_FCR_RFTL64 0x00000040 -#define PCH_UART_FCR_RFTL128 0x00000080 -#define PCH_UART_FCR_RFTL224 0x000000C0 -#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 -#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 -#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 -#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 -#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 -#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 -#define PCH_UART_FCR_RFTL_SHIFT 6 - -#define PCH_UART_LCR_WLS 0x00000003 -#define PCH_UART_LCR_STB 0x00000004 -#define PCH_UART_LCR_PEN 0x00000008 -#define PCH_UART_LCR_EPS 0x00000010 -#define PCH_UART_LCR_SP 0x00000020 -#define PCH_UART_LCR_SB 0x00000040 -#define PCH_UART_LCR_DLAB 0x00000080 -#define PCH_UART_LCR_NP 0x00000000 -#define PCH_UART_LCR_OP PCH_UART_LCR_PEN -#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) -#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) -#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ - PCH_UART_LCR_SP) - -#define PCH_UART_LCR_5BIT 0x00000000 -#define PCH_UART_LCR_6BIT 0x00000001 -#define PCH_UART_LCR_7BIT 0x00000002 -#define PCH_UART_LCR_8BIT 0x00000003 - -#define PCH_UART_MCR_DTR 0x00000001 -#define PCH_UART_MCR_RTS 0x00000002 -#define PCH_UART_MCR_OUT 0x0000000C -#define PCH_UART_MCR_LOOP 0x00000010 -#define PCH_UART_MCR_AFE 0x00000020 - -#define PCH_UART_LSR_DR 0x00000001 -#define PCH_UART_LSR_ERR (1<<7) - -#define PCH_UART_MSR_DCTS 0x00000001 -#define PCH_UART_MSR_DDSR 0x00000002 -#define PCH_UART_MSR_TERI 0x00000004 -#define PCH_UART_MSR_DDCD 0x00000008 -#define PCH_UART_MSR_CTS 0x00000010 -#define PCH_UART_MSR_DSR 0x00000020 -#define PCH_UART_MSR_RI 0x00000040 -#define PCH_UART_MSR_DCD 0x00000080 -#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ - PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) - -#define PCH_UART_DLL 0x00 -#define PCH_UART_DLM 0x01 - -#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b)) - -#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) -#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) -#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) -#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) -#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) - -#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) -#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) -#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) -#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) -#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) -#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) -#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) -#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) -#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) -#define PCH_UART_HAL_STB1 0 -#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) - -#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) -#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) -#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ - PCH_UART_HAL_CLR_RX_FIFO) - -#define PCH_UART_HAL_DMA_MODE0 0 -#define PCH_UART_HAL_FIFO_DIS 0 -#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) -#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ - PCH_UART_FCR_FIFO256) -#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) -#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) -#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) -#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) -#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) -#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) -#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) -#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) -#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) -#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) -#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) -#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) -#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) -#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) - -#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) -#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) -#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) -#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) -#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) - -#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) -#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) -#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) -#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) -#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) - -struct pch_uart_buffer { - unsigned char *buf; - int size; -}; - -struct eg20t_port { - struct uart_port port; - int port_type; - void __iomem *membase; - resource_size_t mapbase; - unsigned int iobase; - struct pci_dev *pdev; - int fifo_size; - int base_baud; - int start_tx; - int start_rx; - int tx_empty; - int int_dis_flag; - int trigger; - int trigger_level; - struct pch_uart_buffer rxbuf; - unsigned int dmsr; - unsigned int fcr; - unsigned int use_dma; - unsigned int use_dma_flag; - struct dma_async_tx_descriptor *desc_tx; - struct dma_async_tx_descriptor *desc_rx; - struct pch_dma_slave param_tx; - struct pch_dma_slave param_rx; - struct dma_chan *chan_tx; - struct dma_chan *chan_rx; - struct scatterlist sg_tx; - struct scatterlist sg_rx; - int tx_dma_use; - void *rx_buf_virt; - dma_addr_t rx_buf_dma; -}; - -static unsigned int default_baud = 9600; -static const int trigger_level_256[4] = { 1, 64, 128, 224 }; -static const int trigger_level_64[4] = { 1, 16, 32, 56 }; -static const int trigger_level_16[4] = { 1, 4, 8, 14 }; -static const int trigger_level_1[4] = { 1, 1, 1, 1 }; - -static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize, - int base_baud) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - - priv->trigger_level = 1; - priv->fcr = 0; -} - -static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base) -{ - unsigned int msr = ioread8(base + UART_MSR); - priv->dmsr |= msr & PCH_UART_MSR_DELTA; - - return msr; -} - -static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, - unsigned int flag) -{ - u8 ier = ioread8(priv->membase + UART_IER); - ier |= flag & PCH_UART_IER_MASK; - iowrite8(ier, priv->membase + UART_IER); -} - -static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, - unsigned int flag) -{ - u8 ier = ioread8(priv->membase + UART_IER); - ier &= ~(flag & PCH_UART_IER_MASK); - iowrite8(ier, priv->membase + UART_IER); -} - -static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, - unsigned int parity, unsigned int bits, - unsigned int stb) -{ - unsigned int dll, dlm, lcr; - int div; - - div = DIV_ROUND(priv->base_baud / 16, baud); - if (div < 0 || USHRT_MAX <= div) { - pr_err("Invalid Baud(div=0x%x)\n", div); - return -EINVAL; - } - - dll = (unsigned int)div & 0x00FFU; - dlm = ((unsigned int)div >> 8) & 0x00FFU; - - if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { - pr_err("Invalid parity(0x%x)\n", parity); - return -EINVAL; - } - - if (bits & ~PCH_UART_LCR_WLS) { - pr_err("Invalid bits(0x%x)\n", bits); - return -EINVAL; - } - - if (stb & ~PCH_UART_LCR_STB) { - pr_err("Invalid STB(0x%x)\n", stb); - return -EINVAL; - } - - lcr = parity; - lcr |= bits; - lcr |= stb; - - pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", - __func__, baud, div, lcr, jiffies); - iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); - iowrite8(dll, priv->membase + PCH_UART_DLL); - iowrite8(dlm, priv->membase + PCH_UART_DLM); - iowrite8(lcr, priv->membase + UART_LCR); - - return 0; -} - -static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, - unsigned int flag) -{ - if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { - pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); - return -EINVAL; - } - - iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); - iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, - priv->membase + UART_FCR); - iowrite8(priv->fcr, priv->membase + UART_FCR); - - return 0; -} - -static int pch_uart_hal_set_fifo(struct eg20t_port *priv, - unsigned int dmamode, - unsigned int fifo_size, unsigned int trigger) -{ - u8 fcr; - - if (dmamode & ~PCH_UART_FCR_DMS) { - pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); - return -EINVAL; - } - - if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { - pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); - return -EINVAL; - } - - if (trigger & ~PCH_UART_FCR_RFTL) { - pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); - return -EINVAL; - } - - switch (priv->fifo_size) { - case 256: - priv->trigger_level = - trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - case 64: - priv->trigger_level = - trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - case 16: - priv->trigger_level = - trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - default: - priv->trigger_level = - trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - } - fcr = - dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; - iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); - iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, - priv->membase + UART_FCR); - iowrite8(fcr, priv->membase + UART_FCR); - priv->fcr = fcr; - - return 0; -} - -static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) -{ - priv->dmsr = 0; - return get_msr(priv, priv->membase); -} - -static int pch_uart_hal_write(struct eg20t_port *priv, - const unsigned char *buf, int tx_size) -{ - int i; - unsigned int thr; - - for (i = 0; i < tx_size;) { - thr = buf[i++]; - iowrite8(thr, priv->membase + PCH_UART_THR); - } - return i; -} - -static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, - int rx_size) -{ - int i; - u8 rbr, lsr; - - lsr = ioread8(priv->membase + UART_LSR); - for (i = 0, lsr = ioread8(priv->membase + UART_LSR); - i < rx_size && lsr & UART_LSR_DR; - lsr = ioread8(priv->membase + UART_LSR)) { - rbr = ioread8(priv->membase + PCH_UART_RBR); - buf[i++] = rbr; - } - return i; -} - -static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv) -{ - unsigned int iir; - int ret; - - iir = ioread8(priv->membase + UART_IIR); - ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP)); - return ret; -} - -static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) -{ - return ioread8(priv->membase + UART_LSR); -} - -static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) -{ - unsigned int lcr; - - lcr = ioread8(priv->membase + UART_LCR); - if (on) - lcr |= PCH_UART_LCR_SB; - else - lcr &= ~PCH_UART_LCR_SB; - - iowrite8(lcr, priv->membase + UART_LCR); -} - -static int push_rx(struct eg20t_port *priv, const unsigned char *buf, - int size) -{ - struct uart_port *port; - struct tty_struct *tty; - - port = &priv->port; - tty = tty_port_tty_get(&port->state->port); - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return -EBUSY; - } - - tty_insert_flip_string(tty, buf, size); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - - return 0; -} - -static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) -{ - int ret; - struct uart_port *port = &priv->port; - - if (port->x_char) { - pr_debug("%s:X character send %02x (%lu)\n", __func__, - port->x_char, jiffies); - buf[0] = port->x_char; - port->x_char = 0; - ret = 1; - } else { - ret = 0; - } - - return ret; -} - -static int dma_push_rx(struct eg20t_port *priv, int size) -{ - struct tty_struct *tty; - int room; - struct uart_port *port = &priv->port; - - port = &priv->port; - tty = tty_port_tty_get(&port->state->port); - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return 0; - } - - room = tty_buffer_request_room(tty, size); - - if (room < size) - dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", - size - room); - if (!room) - return room; - - tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size); - - port->icount.rx += room; - tty_kref_put(tty); - - return room; -} - -static void pch_free_dma(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - - if (priv->chan_tx) { - dma_release_channel(priv->chan_tx); - priv->chan_tx = NULL; - } - if (priv->chan_rx) { - dma_release_channel(priv->chan_rx); - priv->chan_rx = NULL; - } - if (sg_dma_address(&priv->sg_rx)) - dma_free_coherent(port->dev, port->fifosize, - sg_virt(&priv->sg_rx), - sg_dma_address(&priv->sg_rx)); - - return; -} - -static bool filter(struct dma_chan *chan, void *slave) -{ - struct pch_dma_slave *param = slave; - - if ((chan->chan_id == param->chan_id) && (param->dma_dev == - chan->device->dev)) { - chan->private = param; - return true; - } else { - return false; - } -} - -static void pch_request_dma(struct uart_port *port) -{ - dma_cap_mask_t mask; - struct dma_chan *chan; - struct pci_dev *dma_dev; - struct pch_dma_slave *param; - struct eg20t_port *priv = - container_of(port, struct eg20t_port, port); - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev - information */ - /* Set Tx DMA */ - param = &priv->param_tx; - param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line; - param->tx_reg = port->mapbase + UART_TX; - chan = dma_request_channel(mask, filter, param); - if (!chan) { - pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); - return; - } - priv->chan_tx = chan; - - /* Set Rx DMA */ - param = &priv->param_rx; - param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ - param->rx_reg = port->mapbase + UART_RX; - chan = dma_request_channel(mask, filter, param); - if (!chan) { - pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); - dma_release_channel(priv->chan_tx); - return; - } - - /* Get Consistent memory for DMA */ - priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, - &priv->rx_buf_dma, GFP_KERNEL); - priv->chan_rx = chan; -} - -static void pch_dma_rx_complete(void *arg) -{ - struct eg20t_port *priv = arg; - struct uart_port *port = &priv->port; - struct tty_struct *tty = tty_port_tty_get(&port->state->port); - - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return; - } - - if (dma_push_rx(priv, priv->trigger_level)) - tty_flip_buffer_push(tty); - - tty_kref_put(tty); -} - -static void pch_dma_tx_complete(void *arg) -{ - struct eg20t_port *priv = arg; - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - - xmit->tail += sg_dma_len(&priv->sg_tx); - xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += sg_dma_len(&priv->sg_tx); - - async_tx_ack(priv->desc_tx); - priv->tx_dma_use = 0; -} - -static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) -{ - int count = 0; - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) - goto pop_tx_end; - - do { - int cnt_to_end = - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - int sz = min(size - count, cnt_to_end); - memcpy(&buf[count], &xmit->buf[xmit->tail], sz); - xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); - count += sz; - } while (!uart_circ_empty(xmit) && count < size); - -pop_tx_end: - pr_debug("%d characters. Remained %d characters. (%lu)\n", - count, size - count, jiffies); - - return count; -} - -static int handle_rx_to(struct eg20t_port *priv) -{ - struct pch_uart_buffer *buf; - int rx_size; - int ret; - if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); - return 0; - } - buf = &priv->rxbuf; - do { - rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); - ret = push_rx(priv, buf->buf, rx_size); - if (ret) - return 0; - } while (rx_size == buf->size); - - return PCH_UART_HANDLED_RX_INT; -} - -static int handle_rx(struct eg20t_port *priv) -{ - return handle_rx_to(priv); -} - -static int dma_handle_rx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct dma_async_tx_descriptor *desc; - struct scatterlist *sg; - - priv = container_of(port, struct eg20t_port, port); - sg = &priv->sg_rx; - - sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ - - sg_dma_len(sg) = priv->fifo_size; - - sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), - sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & - ~PAGE_MASK); - - sg_dma_address(sg) = priv->rx_buf_dma; - - desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, - sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT); - if (!desc) - return 0; - - priv->desc_rx = desc; - desc->callback = pch_dma_rx_complete; - desc->callback_param = priv; - desc->tx_submit(desc); - dma_async_issue_pending(priv->chan_rx); - - return PCH_UART_HANDLED_RX_INT; -} - -static unsigned int handle_tx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - int ret; - int fifo_size; - int tx_size; - int size; - int tx_empty; - - if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - priv->tx_empty = 1; - return 0; - } - - fifo_size = max(priv->fifo_size, 1); - tx_empty = 1; - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); - port->icount.tx++; - tx_empty = 0; - fifo_size--; - } - size = min(xmit->head - xmit->tail, fifo_size); - tx_size = pop_tx(priv, xmit->buf, size); - if (tx_size > 0) { - ret = pch_uart_hal_write(priv, xmit->buf, tx_size); - port->icount.tx += ret; - tx_empty = 0; - } - - priv->tx_empty = tx_empty; - - if (tx_empty) - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - - return PCH_UART_HANDLED_TX_INT; -} - -static unsigned int dma_handle_tx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &priv->sg_tx; - int nent; - int fifo_size; - int tx_empty; - struct dma_async_tx_descriptor *desc; - - if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - priv->tx_empty = 1; - return 0; - } - - fifo_size = max(priv->fifo_size, 1); - tx_empty = 1; - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); - port->icount.tx++; - tx_empty = 0; - fifo_size--; - } - - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - - priv->tx_dma_use = 1; - - sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ - - sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), - UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); - - nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); - if (!nent) { - pr_err("%s:dma_map_sg Failed\n", __func__); - return 0; - } - - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); - - desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("%s:device_prep_slave_sg Failed\n", __func__); - return 0; - } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - - priv->desc_tx = desc; - desc->callback = pch_dma_tx_complete; - desc->callback_param = priv; - - desc->tx_submit(desc); - - dma_async_issue_pending(priv->chan_tx); - - return PCH_UART_HANDLED_TX_INT; -} - -static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) -{ - u8 fcr = ioread8(priv->membase + UART_FCR); - - /* Reset FIFO */ - fcr |= UART_FCR_CLEAR_RCVR; - iowrite8(fcr, priv->membase + UART_FCR); - - if (lsr & PCH_UART_LSR_ERR) - dev_err(&priv->pdev->dev, "Error data in FIFO\n"); - - if (lsr & UART_LSR_FE) - dev_err(&priv->pdev->dev, "Framing Error\n"); - - if (lsr & UART_LSR_PE) - dev_err(&priv->pdev->dev, "Parity Error\n"); - - if (lsr & UART_LSR_OE) - dev_err(&priv->pdev->dev, "Overrun Error\n"); -} - -static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) -{ - struct eg20t_port *priv = dev_id; - unsigned int handled; - u8 lsr; - int ret = 0; - unsigned int iid; - unsigned long flags; - - spin_lock_irqsave(&priv->port.lock, flags); - handled = 0; - while ((iid = pch_uart_hal_get_iid(priv)) > 1) { - switch (iid) { - case PCH_UART_IID_RLS: /* Receiver Line Status */ - lsr = pch_uart_hal_get_line_status(priv); - if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | - UART_LSR_PE | UART_LSR_OE)) { - pch_uart_err_ir(priv, lsr); - ret = PCH_UART_HANDLED_RX_ERR_INT; - } - break; - case PCH_UART_IID_RDR: /* Received Data Ready */ - if (priv->use_dma) - ret = dma_handle_rx(priv); - else - ret = handle_rx(priv); - break; - case PCH_UART_IID_RDR_TO: /* Received Data Ready - (FIFO Timeout) */ - ret = handle_rx_to(priv); - break; - case PCH_UART_IID_THRE: /* Transmitter Holding Register - Empty */ - if (priv->use_dma) - ret = dma_handle_tx(priv); - else - ret = handle_tx(priv); - break; - case PCH_UART_IID_MS: /* Modem Status */ - ret = PCH_UART_HANDLED_MS_INT; - break; - default: /* Never junp to this label */ - pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); - ret = -1; - break; - } - handled |= (unsigned int)ret; - } - if (handled == 0 && iid <= 1) { - if (priv->int_dis_flag) - priv->int_dis_flag = 0; - } - - spin_unlock_irqrestore(&priv->port.lock, flags); - return IRQ_RETVAL(handled); -} - -/* This function tests whether the transmitter fifo and shifter for the port - described by 'port' is empty. */ -static unsigned int pch_uart_tx_empty(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - priv = container_of(port, struct eg20t_port, port); - if (priv->tx_empty) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* Returns the current state of modem control inputs. */ -static unsigned int pch_uart_get_mctrl(struct uart_port *port) -{ - struct eg20t_port *priv; - u8 modem; - unsigned int ret = 0; - - priv = container_of(port, struct eg20t_port, port); - modem = pch_uart_hal_get_modem(priv); - - if (modem & UART_MSR_DCD) - ret |= TIOCM_CAR; - - if (modem & UART_MSR_RI) - ret |= TIOCM_RNG; - - if (modem & UART_MSR_DSR) - ret |= TIOCM_DSR; - - if (modem & UART_MSR_CTS) - ret |= TIOCM_CTS; - - return ret; -} - -static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - u32 mcr = 0; - unsigned int dat; - struct eg20t_port *priv = container_of(port, struct eg20t_port, port); - - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } -} - -static void pch_uart_stop_tx(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - priv->start_tx = 0; - priv->tx_dma_use = 0; -} - -static void pch_uart_start_tx(struct uart_port *port) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - - if (priv->use_dma) - if (priv->tx_dma_use) - return; - - priv->start_tx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); -} - -static void pch_uart_stop_rx(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); - priv->int_dis_flag = 1; -} - -/* Enable the modem status interrupts. */ -static void pch_uart_enable_ms(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); -} - -/* Control the transmission of a break signal. */ -static void pch_uart_break_ctl(struct uart_port *port, int ctl) -{ - struct eg20t_port *priv; - unsigned long flags; - - priv = container_of(port, struct eg20t_port, port); - spin_lock_irqsave(&port->lock, flags); - pch_uart_hal_set_break(priv, ctl); - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Grab any interrupt resources and initialise any low level driver state. */ -static int pch_uart_startup(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - int fifo_size; - int trigger_level; - - priv = container_of(port, struct eg20t_port, port); - priv->tx_empty = 1; - port->uartclk = priv->base_baud; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); - ret = pch_uart_hal_set_line(priv, default_baud, - PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, - PCH_UART_HAL_STB1); - if (ret) - return ret; - - switch (priv->fifo_size) { - case 256: - fifo_size = PCH_UART_HAL_FIFO256; - break; - case 64: - fifo_size = PCH_UART_HAL_FIFO64; - break; - case 16: - fifo_size = PCH_UART_HAL_FIFO16; - case 1: - default: - fifo_size = PCH_UART_HAL_FIFO_DIS; - break; - } - - switch (priv->trigger) { - case PCH_UART_HAL_TRIGGER1: - trigger_level = 1; - break; - case PCH_UART_HAL_TRIGGER_L: - trigger_level = priv->fifo_size / 4; - break; - case PCH_UART_HAL_TRIGGER_M: - trigger_level = priv->fifo_size / 2; - break; - case PCH_UART_HAL_TRIGGER_H: - default: - trigger_level = priv->fifo_size - (priv->fifo_size / 8); - break; - } - - priv->trigger_level = trigger_level; - ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, - fifo_size, priv->trigger); - if (ret < 0) - return ret; - - ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, - KBUILD_MODNAME, priv); - if (ret < 0) - return ret; - - if (priv->use_dma) - pch_request_dma(port); - - priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); - uart_update_timeout(port, CS8, default_baud); - - return 0; -} - -static void pch_uart_shutdown(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - - priv = container_of(port, struct eg20t_port, port); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); - pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); - ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, - PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); - if (ret) - pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - - if (priv->use_dma_flag) - pch_free_dma(port); - - free_irq(priv->port.irq, priv); -} - -/* Change the port parameters, including word length, parity, stop - *bits. Update read_status_mask and ignore_status_mask to indicate - *the types of events we are interested in receiving. */ -static void pch_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - int baud; - int rtn; - unsigned int parity, bits, stb; - struct eg20t_port *priv; - unsigned long flags; - - priv = container_of(port, struct eg20t_port, port); - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = PCH_UART_HAL_5BIT; - break; - case CS6: - bits = PCH_UART_HAL_6BIT; - break; - case CS7: - bits = PCH_UART_HAL_7BIT; - break; - default: /* CS8 */ - bits = PCH_UART_HAL_8BIT; - break; - } - if (termios->c_cflag & CSTOPB) - stb = PCH_UART_HAL_STB2; - else - stb = PCH_UART_HAL_STB1; - - if (termios->c_cflag & PARENB) { - if (!(termios->c_cflag & PARODD)) - parity = PCH_UART_HAL_PARITY_ODD; - else - parity = PCH_UART_HAL_PARITY_EVEN; - - } else { - parity = PCH_UART_HAL_PARITY_NONE; - } - termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - - spin_lock_irqsave(&port->lock, flags); - - uart_update_timeout(port, termios->c_cflag, baud); - rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); - if (rtn) - goto out; - - /* Don't rewrite B0 */ - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - -out: - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pch_uart_type(struct uart_port *port) -{ - return KBUILD_MODNAME; -} - -static void pch_uart_release_port(struct uart_port *port) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - pci_iounmap(priv->pdev, priv->membase); - pci_release_regions(priv->pdev); -} - -static int pch_uart_request_port(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - void __iomem *membase; - - priv = container_of(port, struct eg20t_port, port); - ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); - if (ret < 0) - return -EBUSY; - - membase = pci_iomap(priv->pdev, 1, 0); - if (!membase) { - pci_release_regions(priv->pdev); - return -EBUSY; - } - priv->membase = port->membase = membase; - - return 0; -} - -static void pch_uart_config_port(struct uart_port *port, int type) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - if (type & UART_CONFIG_TYPE) { - port->type = priv->port_type; - pch_uart_request_port(port); - } -} - -static int pch_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - if (serinfo->flags & UPF_LOW_LATENCY) { - pr_info("PCH UART : Use PIO Mode (without DMA)\n"); - priv->use_dma = 0; - serinfo->flags &= ~UPF_LOW_LATENCY; - } else { -#ifndef CONFIG_PCH_DMA - pr_err("%s : PCH DMA is not Loaded.\n", __func__); - return -EOPNOTSUPP; -#endif - priv->use_dma = 1; - priv->use_dma_flag = 1; - pr_info("PCH UART : Use DMA Mode\n"); - } - - return 0; -} - -static struct uart_ops pch_uart_ops = { - .tx_empty = pch_uart_tx_empty, - .set_mctrl = pch_uart_set_mctrl, - .get_mctrl = pch_uart_get_mctrl, - .stop_tx = pch_uart_stop_tx, - .start_tx = pch_uart_start_tx, - .stop_rx = pch_uart_stop_rx, - .enable_ms = pch_uart_enable_ms, - .break_ctl = pch_uart_break_ctl, - .startup = pch_uart_startup, - .shutdown = pch_uart_shutdown, - .set_termios = pch_uart_set_termios, -/* .pm = pch_uart_pm, Not supported yet */ -/* .set_wake = pch_uart_set_wake, Not supported yet */ - .type = pch_uart_type, - .release_port = pch_uart_release_port, - .request_port = pch_uart_request_port, - .config_port = pch_uart_config_port, - .verify_port = pch_uart_verify_port -}; - -static struct uart_driver pch_uart_driver = { - .owner = THIS_MODULE, - .driver_name = KBUILD_MODNAME, - .dev_name = PCH_UART_DRIVER_DEVICE, - .major = 0, - .minor = 0, - .nr = PCH_UART_NR, -}; - -static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, - int port_type) -{ - struct eg20t_port *priv; - int ret; - unsigned int iobase; - unsigned int mapbase; - unsigned char *rxbuf; - int fifosize, base_baud; - static int num; - - priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); - if (priv == NULL) - goto init_port_alloc_err; - - rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); - if (!rxbuf) - goto init_port_free_txbuf; - - switch (port_type) { - case PORT_UNKNOWN: - fifosize = 256; /* UART0 */ - base_baud = 1843200; /* 1.8432MHz */ - break; - case PORT_8250: - fifosize = 64; /* UART1~3 */ - base_baud = 1843200; /* 1.8432MHz */ - break; - default: - dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); - goto init_port_hal_free; - } - - iobase = pci_resource_start(pdev, 0); - mapbase = pci_resource_start(pdev, 1); - priv->mapbase = mapbase; - priv->iobase = iobase; - priv->pdev = pdev; - priv->tx_empty = 1; - priv->rxbuf.buf = rxbuf; - priv->rxbuf.size = PAGE_SIZE; - - priv->fifo_size = fifosize; - priv->base_baud = base_baud; - priv->port_type = PORT_MAX_8250 + port_type + 1; - priv->port.dev = &pdev->dev; - priv->port.iobase = iobase; - priv->port.membase = NULL; - priv->port.mapbase = mapbase; - priv->port.irq = pdev->irq; - priv->port.iotype = UPIO_PORT; - priv->port.ops = &pch_uart_ops; - priv->port.flags = UPF_BOOT_AUTOCONF; - priv->port.fifosize = fifosize; - priv->port.line = num++; - priv->trigger = PCH_UART_HAL_TRIGGER_M; - - pci_set_drvdata(pdev, priv); - pch_uart_hal_request(pdev, fifosize, base_baud); - ret = uart_add_one_port(&pch_uart_driver, &priv->port); - if (ret < 0) - goto init_port_hal_free; - - return priv; - -init_port_hal_free: - free_page((unsigned long)rxbuf); -init_port_free_txbuf: - kfree(priv); -init_port_alloc_err: - - return NULL; -} - -static void pch_uart_exit_port(struct eg20t_port *priv) -{ - uart_remove_one_port(&pch_uart_driver, &priv->port); - pci_set_drvdata(priv->pdev, NULL); - free_page((unsigned long)priv->rxbuf.buf); -} - -static void pch_uart_pci_remove(struct pci_dev *pdev) -{ - struct eg20t_port *priv; - - priv = (struct eg20t_port *)pci_get_drvdata(pdev); - pch_uart_exit_port(priv); - pci_disable_device(pdev); - kfree(priv); - return; -} -#ifdef CONFIG_PM -static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - - uart_suspend_port(&pch_uart_driver, &priv->port); - - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int pch_uart_pci_resume(struct pci_dev *pdev) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, - "%s-pci_enable_device failed(ret=%d) ", __func__, ret); - return ret; - } - - uart_resume_port(&pch_uart_driver, &priv->port); - - return 0; -} -#else -#define pch_uart_pci_suspend NULL -#define pch_uart_pci_resume NULL -#endif - -static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), - .driver_data = PCH_UART_8LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), - .driver_data = PCH_UART_2LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), - .driver_data = PCH_UART_2LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), - .driver_data = PCH_UART_2LINE}, - {0,}, -}; - -static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - int ret; - struct eg20t_port *priv; - - ret = pci_enable_device(pdev); - if (ret < 0) - goto probe_error; - - priv = pch_uart_init_port(pdev, id->driver_data); - if (!priv) { - ret = -EBUSY; - goto probe_disable_device; - } - pci_set_drvdata(pdev, priv); - - return ret; - -probe_disable_device: - pci_disable_device(pdev); -probe_error: - return ret; -} - -static struct pci_driver pch_uart_pci_driver = { - .name = "pch_uart", - .id_table = pch_uart_pci_id, - .probe = pch_uart_pci_probe, - .remove = __devexit_p(pch_uart_pci_remove), - .suspend = pch_uart_pci_suspend, - .resume = pch_uart_pci_resume, -}; - -static int __init pch_uart_module_init(void) -{ - int ret; - - /* register as UART driver */ - ret = uart_register_driver(&pch_uart_driver); - if (ret < 0) - return ret; - - /* register as PCI driver */ - ret = pci_register_driver(&pch_uart_pci_driver); - if (ret < 0) - uart_unregister_driver(&pch_uart_driver); - - return ret; -} -module_init(pch_uart_module_init); - -static void __exit pch_uart_module_exit(void) -{ - pci_unregister_driver(&pch_uart_pci_driver); - uart_unregister_driver(&pch_uart_driver); -} -module_exit(pch_uart_module_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); -module_param(default_baud, uint, S_IRUGO); diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c deleted file mode 100644 index 5b9cde7..0000000 --- a/drivers/serial/pmac_zilog.c +++ /dev/null @@ -1,2208 +0,0 @@ -/* - * linux/drivers/serial/pmac_zilog.c - * - * Driver for PowerMac Z85c30 based ESCC cell found in the - * "macio" ASICs of various PowerMac models - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Derived from drivers/macintosh/macserial.c by Paul Mackerras - * and drivers/serial/sunzilog.c by David S. Miller - * - * Hrm... actually, I ripped most of sunzilog (Thanks David !) and - * adapted special tweaks needed for us. I don't think it's worth - * merging back those though. The DMA code still has to get in - * and once done, I expect that driver to remain fairly stable in - * the long term, unless we change the driver model again... - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 2004-08-06 Harald Welte - * - Enable BREAK interrupt - * - Add support for sysreq - * - * TODO: - Add DMA support - * - Defer port shutdown to a few seconds after close - * - maybe put something right into uap->clk_divisor - */ - -#undef DEBUG -#undef DEBUG_HARD -#undef USE_CTRL_O_SYSRQ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PPC_PMAC -#include -#include -#include -#include -#include -#else -#include -#define of_machine_is_compatible(x) (0) -#endif - -#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include - -#include "pmac_zilog.h" - -/* Not yet implemented */ -#undef HAS_DBDMA - -static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; -MODULE_AUTHOR("Benjamin Herrenschmidt "); -MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); -MODULE_LICENSE("GPL"); - -#ifdef CONFIG_SERIAL_PMACZILOG_TTYS -#define PMACZILOG_MAJOR TTY_MAJOR -#define PMACZILOG_MINOR 64 -#define PMACZILOG_NAME "ttyS" -#else -#define PMACZILOG_MAJOR 204 -#define PMACZILOG_MINOR 192 -#define PMACZILOG_NAME "ttyPZ" -#endif - - -/* - * For the sake of early serial console, we can do a pre-probe - * (optional) of the ports at rather early boot time. - */ -static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; -static int pmz_ports_count; -static DEFINE_MUTEX(pmz_irq_mutex); - -static struct uart_driver pmz_uart_reg = { - .owner = THIS_MODULE, - .driver_name = PMACZILOG_NAME, - .dev_name = PMACZILOG_NAME, - .major = PMACZILOG_MAJOR, - .minor = PMACZILOG_MINOR, -}; - - -/* - * Load all registers to reprogram the port - * This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) -{ - int i; - - if (ZS_IS_ASLEEP(uap)) - return; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(uap, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - ZS_CLEARERR(uap); - zssync(uap); - ZS_CLEARFIFO(uap); - zssync(uap); - ZS_CLEARERR(uap); - - /* Disable all interrupts. */ - write_zsreg(uap, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(uap, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(uap, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); - - /* now set R7 "prime" on ESCC */ - write_zsreg(uap, R15, regs[R15] | EN85C30); - write_zsreg(uap, R7, regs[R7P]); - - /* make sure we use R7 "non-prime" on ESCC */ - write_zsreg(uap, R15, regs[R15] & ~EN85C30); - - /* Synchronous mode config. */ - write_zsreg(uap, R6, regs[R6]); - write_zsreg(uap, R7, regs[R7]); - - /* Disable baud generator. */ - write_zsreg(uap, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(uap, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(uap, R12, regs[R12]); - write_zsreg(uap, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(uap, R14, regs[R14]); - - /* Reset external status interrupts. */ - write_zsreg(uap, R0, RES_EXT_INT); - write_zsreg(uap, R0, RES_EXT_INT); - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(uap, R3, regs[R3]); - write_zsreg(uap, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(uap, R1, regs[R1]); - - /* Enable interrupts */ - write_zsreg(uap, R9, regs[R9]); -} - -/* - * We do like sunzilog to avoid disrupting pending Tx - * Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void pmz_maybe_update_regs(struct uart_pmac_port *uap) -{ - if (!ZS_REGS_HELD(uap)) { - if (ZS_TX_ACTIVE(uap)) { - uap->flags |= PMACZILOG_FLAG_REGS_HELD; - } else { - pmz_debug("pmz: maybe_update_regs: updating\n"); - pmz_load_zsregs(uap, uap->curregs); - } - } -} - -static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) -{ - struct tty_struct *tty = NULL; - unsigned char ch, r1, drop, error, flag; - int loops = 0; - - /* The interrupt can be enabled when the port isn't open, typically - * that happens when using one port is open and the other closed (stale - * interrupt) or when one port is used as a console. - */ - if (!ZS_IS_OPEN(uap)) { - pmz_debug("pmz: draining input\n"); - /* Port is closed, drain input data */ - for (;;) { - if ((++loops) > 1000) - goto flood; - (void)read_zsreg(uap, R1); - write_zsreg(uap, R0, ERR_RES); - (void)read_zsdata(uap); - ch = read_zsreg(uap, R0); - if (!(ch & Rx_CH_AV)) - break; - } - return NULL; - } - - /* Sanity check, make sure the old bug is no longer happening */ - if (uap->port.state == NULL || uap->port.state->port.tty == NULL) { - WARN_ON(1); - (void)read_zsdata(uap); - return NULL; - } - tty = uap->port.state->port.tty; - - while (1) { - error = 0; - drop = 0; - - r1 = read_zsreg(uap, R1); - ch = read_zsdata(uap); - - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - write_zsreg(uap, R0, ERR_RES); - zssync(uap); - } - - ch &= uap->parity_mask; - if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { - uap->flags &= ~PMACZILOG_FLAG_BREAK; - } - -#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) -#ifdef USE_CTRL_O_SYSRQ - /* Handle the SysRq ^O Hack */ - if (ch == '\x0f') { - uap->port.sysrq = jiffies + HZ*5; - goto next_char; - } -#endif /* USE_CTRL_O_SYSRQ */ - if (uap->port.sysrq) { - int swallow; - spin_unlock(&uap->port.lock); - swallow = uart_handle_sysrq_char(&uap->port, ch); - spin_lock(&uap->port.lock); - if (swallow) - goto next_char; - } -#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ - - /* A real serial line, record the character and status. */ - if (drop) - goto next_char; - - flag = TTY_NORMAL; - uap->port.icount.rx++; - - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { - error = 1; - if (r1 & BRK_ABRT) { - pmz_debug("pmz: got break !\n"); - r1 &= ~(PAR_ERR | CRC_ERR); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto next_char; - } - else if (r1 & PAR_ERR) - uap->port.icount.parity++; - else if (r1 & CRC_ERR) - uap->port.icount.frame++; - if (r1 & Rx_OVR) - uap->port.icount.overrun++; - r1 &= uap->port.read_status_mask; - if (r1 & BRK_ABRT) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - - if (uap->port.ignore_status_mask == 0xff || - (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - next_char: - /* We can get stuck in an infinite loop getting char 0 when the - * line is in a wrong HW state, we break that here. - * When that happens, I disable the receive side of the driver. - * Note that what I've been experiencing is a real irq loop where - * I'm getting flooded regardless of the actual port speed. - * Something stange is going on with the HW - */ - if ((++loops) > 1000) - goto flood; - ch = read_zsreg(uap, R0); - if (!(ch & Rx_CH_AV)) - break; - } - - return tty; - flood: - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - zssync(uap); - pmz_error("pmz: rx irq flood !\n"); - return tty; -} - -static void pmz_status_handle(struct uart_pmac_port *uap) -{ - unsigned char status; - - status = read_zsreg(uap, R0); - write_zsreg(uap, R0, RES_EXT_INT); - zssync(uap); - - if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { - if (status & SYNC_HUNT) - uap->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - * The CTS input is inverted for some reason. -- paulus - */ - if ((status ^ uap->prev_status) & DCD) - uart_handle_dcd_change(&uap->port, - (status & DCD)); - if ((status ^ uap->prev_status) & CTS) - uart_handle_cts_change(&uap->port, - !(status & CTS)); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); - } - - if (status & BRK_ABRT) - uap->flags |= PMACZILOG_FLAG_BREAK; - - uap->prev_status = status; -} - -static void pmz_transmit_chars(struct uart_pmac_port *uap) -{ - struct circ_buf *xmit; - - if (ZS_IS_ASLEEP(uap)) - return; - if (ZS_IS_CONS(uap)) { - unsigned char status = read_zsreg(uap, R0); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(uap)) { - pmz_load_zsregs(uap, uap->curregs); - uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(uap)) { - uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - /* Under some circumstances, we see interrupts reported for - * a closed channel. The interrupt mask in R1 is clear, but - * R3 still signals the interrupts and we see them when taking - * an interrupt for the other channel (this could be a qemu - * bug but since the ESCC doc doesn't specify precsiely whether - * R3 interrup status bits are masked by R1 interrupt enable - * bits, better safe than sorry). --BenH. - */ - if (!ZS_IS_OPEN(uap)) - goto ack_tx_int; - - if (uap->port.x_char) { - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - write_zsdata(uap, uap->port.x_char); - zssync(uap); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - - if (uap->port.state == NULL) - goto ack_tx_int; - xmit = &uap->port.state->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&uap->port); - goto ack_tx_int; - } - if (uart_tx_stopped(&uap->port)) - goto ack_tx_int; - - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - write_zsdata(uap, xmit->buf[xmit->tail]); - zssync(uap); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - return; - -ack_tx_int: - write_zsreg(uap, R0, RES_Tx_P); - zssync(uap); -} - -/* Hrm... we register that twice, fixme later.... */ -static irqreturn_t pmz_interrupt(int irq, void *dev_id) -{ - struct uart_pmac_port *uap = dev_id; - struct uart_pmac_port *uap_a; - struct uart_pmac_port *uap_b; - int rc = IRQ_NONE; - struct tty_struct *tty; - u8 r3; - - uap_a = pmz_get_port_A(uap); - uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); - r3 = read_zsreg(uap_a, R3); - -#ifdef DEBUG_HARD - pmz_debug("irq, r3: %x\n", r3); -#endif - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - write_zsreg(uap_a, R0, RES_H_IUS); - zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); - if (r3 & CHARxIP) - tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); - if (tty != NULL) - tty_flip_buffer_push(tty); - - if (uap_b->node == NULL) - goto out; - - spin_lock(&uap_b->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - write_zsreg(uap_b, R0, RES_H_IUS); - zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); - if (tty != NULL) - tty_flip_buffer_push(tty); - - out: -#ifdef DEBUG_HARD - pmz_debug("irq done.\n"); -#endif - return rc; -} - -/* - * Peek the status register, lock not held by caller - */ -static inline u8 pmz_peek_status(struct uart_pmac_port *uap) -{ - unsigned long flags; - u8 status; - - spin_lock_irqsave(&uap->port.lock, flags); - status = read_zsreg(uap, R0); - spin_unlock_irqrestore(&uap->port.lock, flags); - - return status; -} - -/* - * Check if transmitter is empty - * The port lock is not held. - */ -static unsigned int pmz_tx_empty(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return TIOCSER_TEMT; - - status = pmz_peek_status(to_pmz(port)); - if (status & Tx_BUF_EMP) - return TIOCSER_TEMT; - return 0; -} - -/* - * Set Modem Control (RTS & DTR) bits - * The port lock is held and interrupts are disabled. - * Note: Shall we really filter out RTS on external ports or - * should that be dealt at higher level only ? - */ -static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char set_bits, clear_bits; - - /* Do nothing for irda for now... */ - if (ZS_IS_IRDA(uap)) - return; - /* We get called during boot with a port not up yet */ - if (ZS_IS_ASLEEP(uap) || - !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) - return; - - set_bits = clear_bits = 0; - - if (ZS_IS_INTMODEM(uap)) { - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - } - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - uap->curregs[R5] |= set_bits; - uap->curregs[R5] &= ~clear_bits; - if (ZS_IS_ASLEEP(uap)) - return; - write_zsreg(uap, R5, uap->curregs[R5]); - pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", - set_bits, clear_bits, uap->curregs[R5]); - zssync(uap); -} - -/* - * Get Modem Control bits (only the input ones, the core will - * or that with a cached value of the control ones) - * The port lock is held and interrupts are disabled. - */ -static unsigned int pmz_get_mctrl(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - unsigned int ret; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return 0; - - status = read_zsreg(uap, R0); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC_HUNT) - ret |= TIOCM_DSR; - if (!(status & CTS)) - ret |= TIOCM_CTS; - - return ret; -} - -/* - * Stop TX side. Dealt like sunzilog at next Tx interrupt, - * though for DMA, we will have to do a bit more. - * The port lock is held and interrupts are disabled. - */ -static void pmz_stop_tx(struct uart_port *port) -{ - to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; -} - -/* - * Kick the Tx side. - * The port lock is held and interrupts are disabled. - */ -static void pmz_start_tx(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - - pmz_debug("pmz: start_tx()\n"); - - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return; - - status = read_zsreg(uap, R0); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - write_zsdata(uap, port->x_char); - zssync(uap); - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - write_zsdata(uap, xmit->buf[xmit->tail]); - zssync(uap); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - } - pmz_debug("pmz: start_tx() done.\n"); -} - -/* - * Stop Rx side, basically disable emitting of - * Rx interrupts on the port. We don't disable the rx - * side of the chip proper though - * The port lock is held. - */ -static void pmz_stop_rx(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return; - - pmz_debug("pmz: stop_rx()()\n"); - - /* Disable all RX interrupts. */ - uap->curregs[R1] &= ~RxINT_MASK; - pmz_maybe_update_regs(uap); - - pmz_debug("pmz: stop_rx() done.\n"); -} - -/* - * Enable modem status change interrupts - * The port lock is held. - */ -static void pmz_enable_ms(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char new_reg; - - if (ZS_IS_IRDA(uap) || uap->node == NULL) - return; - new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != uap->curregs[R15]) { - uap->curregs[R15] = new_reg; - - if (ZS_IS_ASLEEP(uap)) - return; - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(uap, R15, uap->curregs[R15]); - } -} - -/* - * Control break state emission - * The port lock is not held. - */ -static void pmz_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - if (uap->node == NULL) - return; - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != uap->curregs[R5]) { - uap->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) { - spin_unlock_irqrestore(&port->lock, flags); - return; - } - write_zsreg(uap, R5, uap->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -#ifdef CONFIG_PPC_PMAC - -/* - * Turn power on or off to the SCC and associated stuff - * (port drivers, modem, IR port, etc.) - * Returns the number of milliseconds we should wait before - * trying to use the port. - */ -static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) -{ - int delay = 0; - int rc; - - if (state) { - rc = pmac_call_feature( - PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); - pmz_debug("port power on result: %d\n", rc); - if (ZS_IS_INTMODEM(uap)) { - rc = pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); - delay = 2500; /* wait for 2.5s before using */ - pmz_debug("modem power result: %d\n", rc); - } - } else { - /* TODO: Make that depend on a timer, don't power down - * immediately - */ - if (ZS_IS_INTMODEM(uap)) { - rc = pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); - pmz_debug("port power off result: %d\n", rc); - } - pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); - } - return delay; -} - -#else - -static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) -{ - return 0; -} - -#endif /* !CONFIG_PPC_PMAC */ - -/* - * FixZeroBug....Works around a bug in the SCC receving channel. - * Inspired from Darwin code, 15 Sept. 2000 -DanM - * - * The following sequence prevents a problem that is seen with O'Hare ASICs - * (most versions -- also with some Heathrow and Hydra ASICs) where a zero - * at the input to the receiver becomes 'stuck' and locks up the receiver. - * This problem can occur as a result of a zero bit at the receiver input - * coincident with any of the following events: - * - * The SCC is initialized (hardware or software). - * A framing error is detected. - * The clocking option changes from synchronous or X1 asynchronous - * clocking to X16, X32, or X64 asynchronous clocking. - * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. - * - * This workaround attempts to recover from the lockup condition by placing - * the SCC in synchronous loopback mode with a fast clock before programming - * any of the asynchronous modes. - */ -static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) -{ - write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); - zssync(uap); - udelay(10); - write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); - zssync(uap); - - write_zsreg(uap, 4, X1CLK | MONSYNC); - write_zsreg(uap, 3, Rx8); - write_zsreg(uap, 5, Tx8 | RTS); - write_zsreg(uap, 9, NV); /* Didn't we already do this? */ - write_zsreg(uap, 11, RCBR | TCBR); - write_zsreg(uap, 12, 0); - write_zsreg(uap, 13, 0); - write_zsreg(uap, 14, (LOOPBAK | BRSRC)); - write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); - write_zsreg(uap, 3, Rx8 | RxENABLE); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ - - /* The channel should be OK now, but it is probably receiving - * loopback garbage. - * Switch to asynchronous mode, disable the receiver, - * and discard everything in the receive buffer. - */ - write_zsreg(uap, 9, NV); - write_zsreg(uap, 4, X16CLK | SB_MASK); - write_zsreg(uap, 3, Rx8); - - while (read_zsreg(uap, 0) & Rx_CH_AV) { - (void)read_zsreg(uap, 8); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, ERR_RES); - } -} - -/* - * Real startup routine, powers up the hardware and sets up - * the SCC. Returns a delay in ms where you need to wait before - * actually using the port, this is typically the internal modem - * powerup delay. This routine expect the lock to be taken. - */ -static int __pmz_startup(struct uart_pmac_port *uap) -{ - int pwr_delay = 0; - - memset(&uap->curregs, 0, sizeof(uap->curregs)); - - /* Power up the SCC & underlying hardware (modem/irda) */ - pwr_delay = pmz_set_scc_power(uap, 1); - - /* Nice buggy HW ... */ - pmz_fix_zero_bug_scc(uap); - - /* Reset the channel */ - uap->curregs[R9] = 0; - write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); - zssync(uap); - udelay(10); - write_zsreg(uap, 9, 0); - zssync(uap); - - /* Clear the interrupt registers */ - write_zsreg(uap, R1, 0); - write_zsreg(uap, R0, ERR_RES); - write_zsreg(uap, R0, ERR_RES); - write_zsreg(uap, R0, RES_H_IUS); - write_zsreg(uap, R0, RES_H_IUS); - - /* Setup some valid baud rate */ - uap->curregs[R4] = X16CLK | SB1; - uap->curregs[R3] = Rx8; - uap->curregs[R5] = Tx8 | RTS; - if (!ZS_IS_IRDA(uap)) - uap->curregs[R5] |= DTR; - uap->curregs[R12] = 0; - uap->curregs[R13] = 0; - uap->curregs[R14] = BRENAB; - - /* Clear handshaking, enable BREAK interrupts */ - uap->curregs[R15] = BRKIE; - - /* Master interrupt enable */ - uap->curregs[R9] |= NV | MIE; - - pmz_load_zsregs(uap, uap->curregs); - - /* Enable receiver and transmitter. */ - write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); - write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); - - /* Remember status for DCD/CTS changes */ - uap->prev_status = read_zsreg(uap, R0); - - return pwr_delay; -} - -static void pmz_irda_reset(struct uart_pmac_port *uap) -{ - uap->curregs[R5] |= DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(110); - uap->curregs[R5] &= ~DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(10); -} - -/* - * This is the "normal" startup routine, using the above one - * wrapped with the lock and doing a schedule delay - */ -static int pmz_startup(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - int pwr_delay = 0; - - pmz_debug("pmz: startup()\n"); - - if (ZS_IS_ASLEEP(uap)) - return -EAGAIN; - if (uap->node == NULL) - return -ENODEV; - - mutex_lock(&pmz_irq_mutex); - - uap->flags |= PMACZILOG_FLAG_IS_OPEN; - - /* A console is never powered down. Else, power up and - * initialize the chip - */ - if (!ZS_IS_CONS(uap)) { - spin_lock_irqsave(&port->lock, flags); - pwr_delay = __pmz_startup(uap); - spin_unlock_irqrestore(&port->lock, flags); - } - - pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, - "SCC", uap)) { - pmz_error("Unable to register zs interrupt handler.\n"); - pmz_set_scc_power(uap, 0); - mutex_unlock(&pmz_irq_mutex); - return -ENXIO; - } - - mutex_unlock(&pmz_irq_mutex); - - /* Right now, we deal with delay by blocking here, I'll be - * smarter later on - */ - if (pwr_delay != 0) { - pmz_debug("pmz: delaying %d ms\n", pwr_delay); - msleep(pwr_delay); - } - - /* IrDA reset is done now */ - if (ZS_IS_IRDA(uap)) - pmz_irda_reset(uap); - - /* Enable interrupts emission from the chip */ - spin_lock_irqsave(&port->lock, flags); - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); - - pmz_debug("pmz: startup() done.\n"); - - return 0; -} - -static void pmz_shutdown(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - - pmz_debug("pmz: shutdown()\n"); - - if (uap->node == NULL) - return; - - mutex_lock(&pmz_irq_mutex); - - /* Release interrupt handler */ - free_irq(uap->port.irq, uap); - - spin_lock_irqsave(&port->lock, flags); - - uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; - - if (!ZS_IS_OPEN(uap->mate)) - pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; - - /* Disable interrupts */ - if (!ZS_IS_ASLEEP(uap)) { - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - zssync(uap); - } - - if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) { - spin_unlock_irqrestore(&port->lock, flags); - mutex_unlock(&pmz_irq_mutex); - return; - } - - /* Disable receiver and transmitter. */ - uap->curregs[R3] &= ~RxENABLE; - uap->curregs[R5] &= ~TxENABLE; - - /* Disable all interrupts and BRK assertion. */ - uap->curregs[R5] &= ~SND_BRK; - pmz_maybe_update_regs(uap); - - /* Shut the chip down */ - pmz_set_scc_power(uap, 0); - - spin_unlock_irqrestore(&port->lock, flags); - - mutex_unlock(&pmz_irq_mutex); - - pmz_debug("pmz: shutdown() done.\n"); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, - unsigned int iflag, unsigned long baud) -{ - int brg; - - /* Switch to external clocking for IrDA high clock rates. That - * code could be re-used for Midi interfaces with different - * multipliers - */ - if (baud >= 115200 && ZS_IS_IRDA(uap)) { - uap->curregs[R4] = X1CLK; - uap->curregs[R11] = RCTRxCP | TCTRxCP; - uap->curregs[R14] = 0; /* BRG off */ - uap->curregs[R12] = 0; - uap->curregs[R13] = 0; - uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; - } else { - switch (baud) { - case ZS_CLOCK/16: /* 230400 */ - uap->curregs[R4] = X16CLK; - uap->curregs[R11] = 0; - uap->curregs[R14] = 0; - break; - case ZS_CLOCK/32: /* 115200 */ - uap->curregs[R4] = X32CLK; - uap->curregs[R11] = 0; - uap->curregs[R14] = 0; - break; - default: - uap->curregs[R4] = X16CLK; - uap->curregs[R11] = TCBR | RCBR; - brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); - uap->curregs[R12] = (brg & 255); - uap->curregs[R13] = ((brg >> 8) & 255); - uap->curregs[R14] = BRENAB; - } - uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; - } - - /* Character size, stop bits, and parity. */ - uap->curregs[3] &= ~RxN_MASK; - uap->curregs[5] &= ~TxN_MASK; - - switch (cflag & CSIZE) { - case CS5: - uap->curregs[3] |= Rx5; - uap->curregs[5] |= Tx5; - uap->parity_mask = 0x1f; - break; - case CS6: - uap->curregs[3] |= Rx6; - uap->curregs[5] |= Tx6; - uap->parity_mask = 0x3f; - break; - case CS7: - uap->curregs[3] |= Rx7; - uap->curregs[5] |= Tx7; - uap->parity_mask = 0x7f; - break; - case CS8: - default: - uap->curregs[3] |= Rx8; - uap->curregs[5] |= Tx8; - uap->parity_mask = 0xff; - break; - }; - uap->curregs[4] &= ~(SB_MASK); - if (cflag & CSTOPB) - uap->curregs[4] |= SB2; - else - uap->curregs[4] |= SB1; - if (cflag & PARENB) - uap->curregs[4] |= PAR_ENAB; - else - uap->curregs[4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - uap->curregs[4] |= PAR_EVEN; - else - uap->curregs[4] &= ~PAR_EVEN; - - uap->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - uap->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - uap->port.read_status_mask |= BRK_ABRT; - - uap->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - uap->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - uap->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - uap->port.ignore_status_mask = 0xff; -} - - -/* - * Set the irda codec on the imac to the specified baud rate. - */ -static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) -{ - u8 cmdbyte; - int t, version; - - switch (*baud) { - /* SIR modes */ - case 2400: - cmdbyte = 0x53; - break; - case 4800: - cmdbyte = 0x52; - break; - case 9600: - cmdbyte = 0x51; - break; - case 19200: - cmdbyte = 0x50; - break; - case 38400: - cmdbyte = 0x4f; - break; - case 57600: - cmdbyte = 0x4e; - break; - case 115200: - cmdbyte = 0x4d; - break; - /* The FIR modes aren't really supported at this point, how - * do we select the speed ? via the FCR on KeyLargo ? - */ - case 1152000: - cmdbyte = 0; - break; - case 4000000: - cmdbyte = 0; - break; - default: /* 9600 */ - cmdbyte = 0x51; - *baud = 9600; - break; - } - - /* Wait for transmitter to drain */ - t = 10000; - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 - || (read_zsreg(uap, R1) & ALL_SNT) == 0) { - if (--t <= 0) { - pmz_error("transmitter didn't drain\n"); - return; - } - udelay(10); - } - - /* Drain the receiver too */ - t = 100; - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); - mdelay(10); - while (read_zsreg(uap, R0) & Rx_CH_AV) { - read_zsdata(uap); - mdelay(10); - if (--t <= 0) { - pmz_error("receiver didn't drain\n"); - return; - } - } - - /* Switch to command mode */ - uap->curregs[R5] |= DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(1); - - /* Switch SCC to 19200 */ - pmz_convert_to_zs(uap, CS8, 0, 19200); - pmz_load_zsregs(uap, uap->curregs); - mdelay(1); - - /* Write get_version command byte */ - write_zsdata(uap, 1); - t = 5000; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - pmz_error("irda_setup timed out on get_version byte\n"); - goto out; - } - udelay(10); - } - version = read_zsdata(uap); - - if (version < 4) { - pmz_info("IrDA: dongle version %d not supported\n", version); - goto out; - } - - /* Send speed mode */ - write_zsdata(uap, cmdbyte); - t = 5000; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - pmz_error("irda_setup timed out on speed mode byte\n"); - goto out; - } - udelay(10); - } - t = read_zsdata(uap); - if (t != cmdbyte) - pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); - - pmz_info("IrDA setup for %ld bps, dongle version: %d\n", - *baud, version); - - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); - - out: - /* Switch back to data mode */ - uap->curregs[R5] &= ~DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); -} - - -static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long baud; - - pmz_debug("pmz: set_termios()\n"); - - if (ZS_IS_ASLEEP(uap)) - return; - - memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); - - /* XXX Check which revs of machines actually allow 1 and 4Mb speeds - * on the IR dongle. Note that the IRTTY driver currently doesn't know - * about the FIR mode and high speed modes. So these are unused. For - * implementing proper support for these, we should probably add some - * DMA as well, at least on the Rx side, which isn't a simple thing - * at this point. - */ - if (ZS_IS_IRDA(uap)) { - /* Calc baud rate */ - baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); - pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); - /* Cet the irda codec to the right rate */ - pmz_irda_setup(uap, &baud); - /* Set final baud rate */ - pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); - pmz_load_zsregs(uap, uap->curregs); - zssync(uap); - } else { - baud = uart_get_baud_rate(port, termios, old, 1200, 230400); - pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); - /* Make sure modem status interrupts are correctly configured */ - if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { - uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; - uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; - } else { - uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); - uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; - } - - /* Load registers to the chip */ - pmz_maybe_update_regs(uap); - } - uart_update_timeout(port, termios->c_cflag, baud); - - pmz_debug("pmz: set_termios() done.\n"); -} - -/* The port lock is not held. */ -static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable IRQs on the port */ - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - - /* Setup new port configuration */ - __pmz_set_termios(port, termios, old); - - /* Re-enable IRQs on the port */ - if (ZS_IS_OPEN(uap)) { - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - } - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pmz_type(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - - if (ZS_IS_IRDA(uap)) - return "Z85c30 ESCC - Infrared port"; - else if (ZS_IS_INTMODEM(uap)) - return "Z85c30 ESCC - Internal modem"; - return "Z85c30 ESCC - Serial port"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void pmz_release_port(struct uart_port *port) -{ -} - -static int pmz_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void pmz_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL - -static int pmz_poll_get_char(struct uart_port *port) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); -} - -static void pmz_poll_put_char(struct uart_port *port, unsigned char c) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, c); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops pmz_pops = { - .tx_empty = pmz_tx_empty, - .set_mctrl = pmz_set_mctrl, - .get_mctrl = pmz_get_mctrl, - .stop_tx = pmz_stop_tx, - .start_tx = pmz_start_tx, - .stop_rx = pmz_stop_rx, - .enable_ms = pmz_enable_ms, - .break_ctl = pmz_break_ctl, - .startup = pmz_startup, - .shutdown = pmz_shutdown, - .set_termios = pmz_set_termios, - .type = pmz_type, - .release_port = pmz_release_port, - .request_port = pmz_request_port, - .config_port = pmz_config_port, - .verify_port = pmz_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = pmz_poll_get_char, - .poll_put_char = pmz_poll_put_char, -#endif -}; - -#ifdef CONFIG_PPC_PMAC - -/* - * Setup one port structure after probing, HW is down at this point, - * Unlike sunzilog, we don't need to pre-init the spinlock as we don't - * register our console before uart_add_one_port() is called - */ -static int __init pmz_init_port(struct uart_pmac_port *uap) -{ - struct device_node *np = uap->node; - const char *conn; - const struct slot_names_prop { - int count; - char name[1]; - } *slots; - int len; - struct resource r_ports, r_rxdma, r_txdma; - - /* - * Request & map chip registers - */ - if (of_address_to_resource(np, 0, &r_ports)) - return -ENODEV; - uap->port.mapbase = r_ports.start; - uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - - uap->control_reg = uap->port.membase; - uap->data_reg = uap->control_reg + 0x10; - - /* - * Request & map DBDMA registers - */ -#ifdef HAS_DBDMA - if (of_address_to_resource(np, 1, &r_txdma) == 0 && - of_address_to_resource(np, 2, &r_rxdma) == 0) - uap->flags |= PMACZILOG_FLAG_HAS_DMA; -#else - memset(&r_txdma, 0, sizeof(struct resource)); - memset(&r_rxdma, 0, sizeof(struct resource)); -#endif - if (ZS_HAS_DMA(uap)) { - uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); - if (uap->tx_dma_regs == NULL) { - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); - if (uap->rx_dma_regs == NULL) { - iounmap(uap->tx_dma_regs); - uap->tx_dma_regs = NULL; - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->tx_dma_irq = irq_of_parse_and_map(np, 1); - uap->rx_dma_irq = irq_of_parse_and_map(np, 2); - } -no_dma: - - /* - * Detect port type - */ - if (of_device_is_compatible(np, "cobalt")) - uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - conn = of_get_property(np, "AAPL,connector", &len); - if (conn && (strcmp(conn, "infrared") == 0)) - uap->flags |= PMACZILOG_FLAG_IS_IRDA; - uap->port_type = PMAC_SCC_ASYNC; - /* 1999 Powerbook G3 has slot-names property instead */ - slots = of_get_property(np, "slot-names", &len); - if (slots && slots->count > 0) { - if (strcmp(slots->name, "IrDA") == 0) - uap->flags |= PMACZILOG_FLAG_IS_IRDA; - else if (strcmp(slots->name, "Modem") == 0) - uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - } - if (ZS_IS_IRDA(uap)) - uap->port_type = PMAC_SCC_IRDA; - if (ZS_IS_INTMODEM(uap)) { - struct device_node* i2c_modem = - of_find_node_by_name(NULL, "i2c-modem"); - if (i2c_modem) { - const char* mid = - of_get_property(i2c_modem, "modem-id", NULL); - if (mid) switch(*mid) { - case 0x04 : - case 0x05 : - case 0x07 : - case 0x08 : - case 0x0b : - case 0x0c : - uap->port_type = PMAC_SCC_I2S1; - } - printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", - mid ? (*mid) : 0); - of_node_put(i2c_modem); - } else { - printk(KERN_INFO "pmac_zilog: serial modem detected\n"); - } - } - - /* - * Init remaining bits of "port" structure - */ - uap->port.iotype = UPIO_MEM; - uap->port.irq = irq_of_parse_and_map(np, 0); - uap->port.uartclk = ZS_CLOCK; - uap->port.fifosize = 1; - uap->port.ops = &pmz_pops; - uap->port.type = PORT_PMAC_ZILOG; - uap->port.flags = 0; - - /* - * Fixup for the port on Gatwick for which the device-tree has - * missing interrupts. Normally, the macio_dev would contain - * fixed up interrupt info, but we use the device-tree directly - * here due to early probing so we need the fixup too. - */ - if (uap->port.irq == NO_IRQ && - np->parent && np->parent->parent && - of_device_is_compatible(np->parent->parent, "gatwick")) { - /* IRQs on gatwick are offset by 64 */ - uap->port.irq = irq_create_mapping(NULL, 64 + 15); - uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); - uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); - } - - /* Setup some valid baud rate information in the register - * shadows so we don't write crap there before baud rate is - * first initialized. - */ - pmz_convert_to_zs(uap, CS8, 0, 9600); - - return 0; -} - -/* - * Get rid of a port on module removal - */ -static void pmz_dispose_port(struct uart_pmac_port *uap) -{ - struct device_node *np; - - np = uap->node; - iounmap(uap->rx_dma_regs); - iounmap(uap->tx_dma_regs); - iounmap(uap->control_reg); - uap->node = NULL; - of_node_put(np); - memset(uap, 0, sizeof(struct uart_pmac_port)); -} - -/* - * Called upon match with an escc node in the device-tree. - */ -static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) -{ - int i; - - /* Iterate the pmz_ports array to find a matching entry - */ - for (i = 0; i < MAX_ZS_PORTS; i++) - if (pmz_ports[i].node == mdev->ofdev.dev.of_node) { - struct uart_pmac_port *uap = &pmz_ports[i]; - - uap->dev = mdev; - dev_set_drvdata(&mdev->ofdev.dev, uap); - if (macio_request_resources(uap->dev, "pmac_zilog")) - printk(KERN_WARNING "%s: Failed to request resource" - ", port still active\n", - uap->node->name); - else - uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; - return 0; - } - return -ENODEV; -} - -/* - * That one should not be called, macio isn't really a hotswap device, - * we don't expect one of those serial ports to go away... - */ -static int pmz_detach(struct macio_dev *mdev) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - - if (!uap) - return -ENODEV; - - if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { - macio_release_resources(uap->dev); - uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; - } - dev_set_drvdata(&mdev->ofdev.dev, NULL); - uap->dev = NULL; - - return 0; -} - - -static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - struct uart_state *state; - unsigned long flags; - - if (uap == NULL) { - printk("HRM... pmz_suspend with NULL uap\n"); - return 0; - } - - if (pm_state.event == mdev->ofdev.dev.power.power_state.event) - return 0; - - pmz_debug("suspend, switching to state %d\n", pm_state.event); - - state = pmz_uart_reg.state + uap->port.line; - - mutex_lock(&pmz_irq_mutex); - mutex_lock(&state->port.mutex); - - spin_lock_irqsave(&uap->port.lock, flags); - - if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) { - /* Disable receiver and transmitter. */ - uap->curregs[R3] &= ~RxENABLE; - uap->curregs[R5] &= ~TxENABLE; - - /* Disable all interrupts and BRK assertion. */ - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - uap->curregs[R5] &= ~SND_BRK; - pmz_load_zsregs(uap, uap->curregs); - uap->flags |= PMACZILOG_FLAG_IS_ASLEEP; - mb(); - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate)) - if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { - pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; - disable_irq(uap->port.irq); - } - - if (ZS_IS_CONS(uap)) - uap->port.cons->flags &= ~CON_ENABLED; - - /* Shut the chip down */ - pmz_set_scc_power(uap, 0); - - mutex_unlock(&state->port.mutex); - mutex_unlock(&pmz_irq_mutex); - - pmz_debug("suspend, switching complete\n"); - - mdev->ofdev.dev.power.power_state = pm_state; - - return 0; -} - - -static int pmz_resume(struct macio_dev *mdev) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - struct uart_state *state; - unsigned long flags; - int pwr_delay = 0; - - if (uap == NULL) - return 0; - - if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) - return 0; - - pmz_debug("resume, switching to state 0\n"); - - state = pmz_uart_reg.state + uap->port.line; - - mutex_lock(&pmz_irq_mutex); - mutex_lock(&state->port.mutex); - - spin_lock_irqsave(&uap->port.lock, flags); - if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { - spin_unlock_irqrestore(&uap->port.lock, flags); - goto bail; - } - pwr_delay = __pmz_startup(uap); - - /* Take care of config that may have changed while asleep */ - __pmz_set_termios(&uap->port, &uap->termios_cache, NULL); - - if (ZS_IS_OPEN(uap)) { - /* Enable interrupts */ - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - if (ZS_IS_CONS(uap)) - uap->port.cons->flags |= CON_ENABLED; - - /* Re-enable IRQ on the controller */ - if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { - pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - enable_irq(uap->port.irq); - } - - bail: - mutex_unlock(&state->port.mutex); - mutex_unlock(&pmz_irq_mutex); - - /* Right now, we deal with delay by blocking here, I'll be - * smarter later on - */ - if (pwr_delay != 0) { - pmz_debug("pmz: delaying %d ms\n", pwr_delay); - msleep(pwr_delay); - } - - pmz_debug("resume, switching complete\n"); - - mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; - - return 0; -} - -/* - * Probe all ports in the system and build the ports array, we register - * with the serial layer at this point, the macio-type probing is only - * used later to "attach" to the sysfs tree so we get power management - * events - */ -static int __init pmz_probe(void) -{ - struct device_node *node_p, *node_a, *node_b, *np; - int count = 0; - int rc; - - /* - * Find all escc chips in the system - */ - node_p = of_find_node_by_name(NULL, "escc"); - while (node_p) { - /* - * First get channel A/B node pointers - * - * TODO: Add routines with proper locking to do that... - */ - node_a = node_b = NULL; - for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) { - if (strncmp(np->name, "ch-a", 4) == 0) - node_a = of_node_get(np); - else if (strncmp(np->name, "ch-b", 4) == 0) - node_b = of_node_get(np); - } - if (!node_a && !node_b) { - of_node_put(node_a); - of_node_put(node_b); - printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", - (!node_a) ? 'a' : 'b', node_p->full_name); - goto next; - } - - /* - * Fill basic fields in the port structures - */ - pmz_ports[count].mate = &pmz_ports[count+1]; - pmz_ports[count+1].mate = &pmz_ports[count]; - pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; - pmz_ports[count].node = node_a; - pmz_ports[count+1].node = node_b; - pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; - - /* - * Setup the ports for real - */ - rc = pmz_init_port(&pmz_ports[count]); - if (rc == 0 && node_b != NULL) - rc = pmz_init_port(&pmz_ports[count+1]); - if (rc != 0) { - of_node_put(node_a); - of_node_put(node_b); - memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); - memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); - goto next; - } - count += 2; -next: - node_p = of_find_node_by_name(node_p, "escc"); - } - pmz_ports_count = count; - - return 0; -} - -#else - -extern struct platform_device scc_a_pdev, scc_b_pdev; - -static int __init pmz_init_port(struct uart_pmac_port *uap) -{ - struct resource *r_ports; - int irq; - - r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); - irq = platform_get_irq(uap->node, 0); - if (!r_ports || !irq) - return -ENODEV; - - uap->port.mapbase = r_ports->start; - uap->port.membase = (unsigned char __iomem *) r_ports->start; - uap->port.iotype = UPIO_MEM; - uap->port.irq = irq; - uap->port.uartclk = ZS_CLOCK; - uap->port.fifosize = 1; - uap->port.ops = &pmz_pops; - uap->port.type = PORT_PMAC_ZILOG; - uap->port.flags = 0; - - uap->control_reg = uap->port.membase; - uap->data_reg = uap->control_reg + 4; - uap->port_type = 0; - - pmz_convert_to_zs(uap, CS8, 0, 9600); - - return 0; -} - -static int __init pmz_probe(void) -{ - int err; - - pmz_ports_count = 0; - - pmz_ports[0].mate = &pmz_ports[1]; - pmz_ports[0].port.line = 0; - pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; - pmz_ports[0].node = &scc_a_pdev; - err = pmz_init_port(&pmz_ports[0]); - if (err) - return err; - pmz_ports_count++; - - pmz_ports[1].mate = &pmz_ports[0]; - pmz_ports[1].port.line = 1; - pmz_ports[1].flags = 0; - pmz_ports[1].node = &scc_b_pdev; - err = pmz_init_port(&pmz_ports[1]); - if (err) - return err; - pmz_ports_count++; - - return 0; -} - -static void pmz_dispose_port(struct uart_pmac_port *uap) -{ - memset(uap, 0, sizeof(struct uart_pmac_port)); -} - -static int __init pmz_attach(struct platform_device *pdev) -{ - int i; - - for (i = 0; i < pmz_ports_count; i++) - if (pmz_ports[i].node == pdev) - return 0; - return -ENODEV; -} - -static int __exit pmz_detach(struct platform_device *pdev) -{ - return 0; -} - -#endif /* !CONFIG_PPC_PMAC */ - -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - -static void pmz_console_write(struct console *con, const char *s, unsigned int count); -static int __init pmz_console_setup(struct console *co, char *options); - -static struct console pmz_console = { - .name = PMACZILOG_NAME, - .write = pmz_console_write, - .device = uart_console_device, - .setup = pmz_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pmz_uart_reg, -}; - -#define PMACZILOG_CONSOLE &pmz_console -#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ -#define PMACZILOG_CONSOLE (NULL) -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - -/* - * Register the driver, console driver and ports with the serial - * core - */ -static int __init pmz_register(void) -{ - int i, rc; - - pmz_uart_reg.nr = pmz_ports_count; - pmz_uart_reg.cons = PMACZILOG_CONSOLE; - - /* - * Register this driver with the serial core - */ - rc = uart_register_driver(&pmz_uart_reg); - if (rc) - return rc; - - /* - * Register each port with the serial core - */ - for (i = 0; i < pmz_ports_count; i++) { - struct uart_pmac_port *uport = &pmz_ports[i]; - /* NULL node may happen on wallstreet */ - if (uport->node != NULL) - rc = uart_add_one_port(&pmz_uart_reg, &uport->port); - if (rc) - goto err_out; - } - - return 0; -err_out: - while (i-- > 0) { - struct uart_pmac_port *uport = &pmz_ports[i]; - uart_remove_one_port(&pmz_uart_reg, &uport->port); - } - uart_unregister_driver(&pmz_uart_reg); - return rc; -} - -#ifdef CONFIG_PPC_PMAC - -static struct of_device_id pmz_match[] = -{ - { - .name = "ch-a", - }, - { - .name = "ch-b", - }, - {}, -}; -MODULE_DEVICE_TABLE (of, pmz_match); - -static struct macio_driver pmz_driver = { - .driver = { - .name = "pmac_zilog", - .owner = THIS_MODULE, - .of_match_table = pmz_match, - }, - .probe = pmz_attach, - .remove = pmz_detach, - .suspend = pmz_suspend, - .resume = pmz_resume, -}; - -#else - -static struct platform_driver pmz_driver = { - .remove = __exit_p(pmz_detach), - .driver = { - .name = "scc", - .owner = THIS_MODULE, - }, -}; - -#endif /* !CONFIG_PPC_PMAC */ - -static int __init init_pmz(void) -{ - int rc, i; - printk(KERN_INFO "%s\n", version); - - /* - * First, we need to do a direct OF-based probe pass. We - * do that because we want serial console up before the - * macio stuffs calls us back, and since that makes it - * easier to pass the proper number of channels to - * uart_register_driver() - */ - if (pmz_ports_count == 0) - pmz_probe(); - - /* - * Bail early if no port found - */ - if (pmz_ports_count == 0) - return -ENODEV; - - /* - * Now we register with the serial layer - */ - rc = pmz_register(); - if (rc) { - printk(KERN_ERR - "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" - "pmac_zilog: Did another serial driver already claim the minors?\n"); - /* effectively "pmz_unprobe()" */ - for (i=0; i < pmz_ports_count; i++) - pmz_dispose_port(&pmz_ports[i]); - return rc; - } - - /* - * Then we register the macio driver itself - */ -#ifdef CONFIG_PPC_PMAC - return macio_register_driver(&pmz_driver); -#else - return platform_driver_probe(&pmz_driver, pmz_attach); -#endif -} - -static void __exit exit_pmz(void) -{ - int i; - -#ifdef CONFIG_PPC_PMAC - /* Get rid of macio-driver (detach from macio) */ - macio_unregister_driver(&pmz_driver); -#else - platform_driver_unregister(&pmz_driver); -#endif - - for (i = 0; i < pmz_ports_count; i++) { - struct uart_pmac_port *uport = &pmz_ports[i]; - if (uport->node != NULL) { - uart_remove_one_port(&pmz_uart_reg, &uport->port); - pmz_dispose_port(uport); - } - } - /* Unregister UART driver */ - uart_unregister_driver(&pmz_uart_reg); -} - -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - -static void pmz_console_putchar(struct uart_port *port, int ch) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void pmz_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_pmac_port *uap = &pmz_ports[con->index]; - unsigned long flags; - - if (ZS_IS_ASLEEP(uap)) - return; - spin_lock_irqsave(&uap->port.lock, flags); - - /* Turn of interrupts and enable the transmitter. */ - write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); - write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); - - uart_console_write(&uap->port, s, count, pmz_console_putchar); - - /* Restore the values in the registers. */ - write_zsreg(uap, R1, uap->curregs[1]); - /* Don't disable the transmitter. */ - - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -/* - * Setup the serial console - */ -static int __init pmz_console_setup(struct console *co, char *options) -{ - struct uart_pmac_port *uap; - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - unsigned long pwr_delay; - - /* - * XServe's default to 57600 bps - */ - if (of_machine_is_compatible("RackMac1,1") - || of_machine_is_compatible("RackMac1,2") - || of_machine_is_compatible("MacRISC4")) - baud = 57600; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= pmz_ports_count) - co->index = 0; - uap = &pmz_ports[co->index]; - if (uap->node == NULL) - return -ENODEV; - port = &uap->port; - - /* - * Mark port as beeing a console - */ - uap->flags |= PMACZILOG_FLAG_IS_CONS; - - /* - * Temporary fix for uart layer who didn't setup the spinlock yet - */ - spin_lock_init(&port->lock); - - /* - * Enable the hardware - */ - pwr_delay = __pmz_startup(uap); - if (pwr_delay) - mdelay(pwr_delay); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static int __init pmz_console_init(void) -{ - /* Probe ports */ - pmz_probe(); - - /* TODO: Autoprobe console based on OF */ - /* pmz_console.index = i; */ - register_console(&pmz_console); - - return 0; - -} -console_initcall(pmz_console_init); -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - -module_init(init_pmz); -module_exit(exit_pmz); diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h deleted file mode 100644 index cbc34fb..0000000 --- a/drivers/serial/pmac_zilog.h +++ /dev/null @@ -1,396 +0,0 @@ -#ifndef __PMAC_ZILOG_H__ -#define __PMAC_ZILOG_H__ - -#ifdef CONFIG_PPC_PMAC -#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) -#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) -#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) -#else -#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) -#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) -#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) -#endif - -/* - * At most 2 ESCCs with 2 ports each - */ -#define MAX_ZS_PORTS 4 - -/* - * We wrap our port structure around the generic uart_port. - */ -#define NUM_ZSREGS 17 - -struct uart_pmac_port { - struct uart_port port; - struct uart_pmac_port *mate; - -#ifdef CONFIG_PPC_PMAC - /* macio_dev for the escc holding this port (maybe be null on - * early inited port) - */ - struct macio_dev *dev; - /* device node to this port, this points to one of 2 childs - * of "escc" node (ie. ch-a or ch-b) - */ - struct device_node *node; -#else - struct platform_device *node; -#endif - - /* Port type as obtained from device tree (IRDA, modem, ...) */ - int port_type; - u8 curregs[NUM_ZSREGS]; - - unsigned int flags; -#define PMACZILOG_FLAG_IS_CONS 0x00000001 -#define PMACZILOG_FLAG_IS_KGDB 0x00000002 -#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 -#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 -#define PMACZILOG_FLAG_REGS_HELD 0x00000010 -#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 -#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 -#define PMACZILOG_FLAG_ENABLED 0x00000080 -#define PMACZILOG_FLAG_IS_IRDA 0x00000100 -#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 -#define PMACZILOG_FLAG_HAS_DMA 0x00000400 -#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 -#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000 -#define PMACZILOG_FLAG_IS_OPEN 0x00002000 -#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000 -#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 -#define PMACZILOG_FLAG_BREAK 0x00010000 - - unsigned char parity_mask; - unsigned char prev_status; - - volatile u8 __iomem *control_reg; - volatile u8 __iomem *data_reg; - -#ifdef CONFIG_PPC_PMAC - unsigned int tx_dma_irq; - unsigned int rx_dma_irq; - volatile struct dbdma_regs __iomem *tx_dma_regs; - volatile struct dbdma_regs __iomem *rx_dma_regs; -#endif - - struct ktermios termios_cache; -}; - -#define to_pmz(p) ((struct uart_pmac_port *)(p)) - -static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) -{ - if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) - return uap; - return uap->mate; -} - -/* - * Register accessors. Note that we don't need to enforce a recovery - * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, - * though if we try to use this driver on older machines, we might have - * to add it back - */ -static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) -{ - if (reg != 0) - writeb(reg, port->control_reg); - return readb(port->control_reg); -} - -static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) -{ - if (reg != 0) - writeb(reg, port->control_reg); - writeb(value, port->control_reg); -} - -static inline u8 read_zsdata(struct uart_pmac_port *port) -{ - return readb(port->data_reg); -} - -static inline void write_zsdata(struct uart_pmac_port *port, u8 data) -{ - writeb(data, port->data_reg); -} - -static inline void zssync(struct uart_pmac_port *port) -{ - (void)readb(port->control_reg); -} - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 -#define R7P 16 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ -#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ -#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENABLE 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ -#define SB_MASK 0xc - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENABLE 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 7' (Some enhanced feature control) */ -#define ENEXREAD 0x40 /* Enable read of some write registers */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define EN85C30 1 /* Enable some 85c30-enhanced registers */ -#define ZCIE 2 /* Zero count IE */ -#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC_HUNT 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x06 - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) -#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ - } while(0) - -#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) -#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) -#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) -#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) -#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) -#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) -#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) - -#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c deleted file mode 100644 index 0aa75a9..0000000 --- a/drivers/serial/pnx8xxx_uart.c +++ /dev/null @@ -1,854 +0,0 @@ -/* - * UART driver for PNX8XXX SoCs - * - * Author: Per Hallsmark per.hallsmark@mvista.com - * Ported to 2.6 kernel by EmbeddedAlley - * Reworked by Vitaly Wool - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of - * any kind, whether express or implied. - * - */ - -#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* We'll be using StrongARM sa1100 serial port major/minor */ -#define SERIAL_PNX8XXX_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 2 - -#define PNX8XXX_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to FIFO - * and interrupt status bits - */ -#define SM_TO_FIFO(x) ((x) >> 10) -#define SM_TO_ISTAT(x) ((x) & 0x000001ff) -#define FIFO_TO_SM(x) ((x) << 10) -#define ISTAT_TO_SM(x) ((x) & 0x000001ff) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x1000 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -extern struct pnx8xxx_port pnx8xxx_ports[]; - -static inline int serial_in(struct pnx8xxx_port *sport, int offset) -{ - return (__raw_readl(sport->port.membase + offset)); -} - -static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) -{ - __raw_writel(value, sport->port.membase + offset); -} - -/* - * Handle any change of modem status signal since we were last called. - */ -static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void pnx8xxx_timeout(unsigned long data) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - pnx8xxx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void pnx8xxx_stop_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Disable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); -} - -/* - * interrupts may not be disabled on entry - */ -static void pnx8xxx_start_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); - - /* Enable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); -} - -/* - * Interrupts enabled - */ -static void pnx8xxx_stop_rx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Disable RX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); - - /* Clear all pending RX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void pnx8xxx_enable_ms(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) -{ - struct tty_struct *tty = sport->port.state->port.tty; - unsigned int status, ch, flg; - - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { - ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | - PNX8XXX_UART_FIFO_RXPAR | - PNX8XXX_UART_FIFO_RXBRK) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { - status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); - sport->port.icount.brk++; - if (uart_handle_break(&sport->port)) - goto ignore_char; - } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - sport->port.icount.parity++; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - sport->port.icount.frame++; - if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - flg = TTY_PARITY; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); - - ignore_char: - serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | - PNX8XXX_UART_LCR_RX_NEXT); - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - } - tty_flip_buffer_push(tty); -} - -static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - pnx8xxx_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - pnx8xxx_stop_tx(&sport->port); - return; - } - - /* - * TX while bytes available - */ - while (((serial_in(sport, PNX8XXX_FIFO) & - PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { - serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - pnx8xxx_stop_tx(&sport->port); -} - -static irqreturn_t pnx8xxx_int(int irq, void *dev_id) -{ - struct pnx8xxx_port *sport = dev_id; - unsigned int status; - - spin_lock(&sport->port.lock); - /* Get the interrupts */ - status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); - - /* Byte or break signal received */ - if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) - pnx8xxx_rx_chars(sport); - - /* TX holding register empty - transmit a byte */ - if (status & PNX8XXX_UART_INT_TX) - pnx8xxx_tx_chars(sport); - - /* Clear the ISTAT register */ - serial_out(sport, PNX8XXX_ICLR, status); - - spin_unlock(&sport->port.lock); - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int pnx8xxx_tx_empty(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; -} - -static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int mctrl = TIOCM_DSR; - unsigned int msr; - - /* REVISIT */ - - msr = serial_in(sport, PNX8XXX_MCR); - - mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; - mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; - - return mctrl; -} - -static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -#if 0 /* FIXME */ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int msr; -#endif -} - -/* - * Interrupts always disabled. - */ -static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned long flags; - unsigned int lcr; - - spin_lock_irqsave(&sport->port.lock, flags); - lcr = serial_in(sport, PNX8XXX_LCR); - if (break_state == -1) - lcr |= PNX8XXX_UART_LCR_TXBREAK; - else - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - serial_out(sport, PNX8XXX_LCR, lcr); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int pnx8xxx_startup(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, pnx8xxx_int, 0, - "pnx8xxx-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | - PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - pnx8xxx_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void pnx8xxx_shutdown(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int lcr; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Disable all interrupts - */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* - * Reset the Tx and Rx FIFOS, disable the break condition - */ - lcr = serial_in(sport, PNX8XXX_LCR); - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; - serial_out(sport, PNX8XXX_LCR, lcr); - - /* - * Clear all interrupts - */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); -} - -static void -pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned long flags; - unsigned int lcr_fcr, old_ien, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - lcr_fcr = PNX8XXX_UART_LCR_8BIT; - else - lcr_fcr = 0; - - if (termios->c_cflag & CSTOPB) - lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; - if (termios->c_cflag & PARENB) { - lcr_fcr |= PNX8XXX_UART_LCR_PAREN; - if (!(termios->c_cflag & PARODD)) - lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | - ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) - barrier(); - - /* then, disable everything */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* Reset the Rx and Tx FIFOs too */ - lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; - lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; - - /* set the parity, stop bits and data size */ - serial_out(sport, PNX8XXX_LCR, lcr_fcr); - - /* set the baud rate */ - quot -= 1; - serial_out(sport, PNX8XXX_BAUD, quot); - - serial_out(sport, PNX8XXX_ICLR, -1); - - serial_out(sport, PNX8XXX_IEN, old_ien); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - pnx8xxx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *pnx8xxx_type(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void pnx8xxx_release_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int pnx8xxx_request_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "pnx8xxx-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pnx8xxx_config_port(struct uart_port *port, int flags) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - if (flags & UART_CONFIG_TYPE && - pnx8xxx_request_port(&sport->port) == 0) - sport->port.type = PORT_PNX8XXX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_PNX8XXX and PORT_UNKNOWN - */ -static int -pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops pnx8xxx_pops = { - .tx_empty = pnx8xxx_tx_empty, - .set_mctrl = pnx8xxx_set_mctrl, - .get_mctrl = pnx8xxx_get_mctrl, - .stop_tx = pnx8xxx_stop_tx, - .start_tx = pnx8xxx_start_tx, - .stop_rx = pnx8xxx_stop_rx, - .enable_ms = pnx8xxx_enable_ms, - .break_ctl = pnx8xxx_break_ctl, - .startup = pnx8xxx_startup, - .shutdown = pnx8xxx_shutdown, - .set_termios = pnx8xxx_set_termios, - .type = pnx8xxx_type, - .release_port = pnx8xxx_release_port, - .request_port = pnx8xxx_request_port, - .config_port = pnx8xxx_config_port, - .verify_port = pnx8xxx_verify_port, -}; - - -/* - * Setup the PNX8XXX serial ports. - * - * Note also that we support "console=ttySx" where "x" is either 0 or 1. - */ -static void __init pnx8xxx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - init_timer(&pnx8xxx_ports[i].timer); - pnx8xxx_ports[i].timer.function = pnx8xxx_timeout; - pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i]; - pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; - } -} - -#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE - -static void pnx8xxx_console_putchar(struct uart_port *port, int ch) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int status; - - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - serial_out(sport, PNX8XXX_FIFO, ch); -} - -/* - * Interrupts are disabled on entering - */static void -pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; - unsigned int old_ien, status; - - /* - * First, save IEN and then disable interrupts - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IEN - */ - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - - /* Clear TX and EMPTY interrupt */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | - PNX8XXX_UART_INT_EMPTY); - - serial_out(sport, PNX8XXX_IEN, old_ien); -} - -static int __init -pnx8xxx_console_setup(struct console *co, char *options) -{ - struct pnx8xxx_port *sport; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &pnx8xxx_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver pnx8xxx_reg; -static struct console pnx8xxx_console = { - .name = "ttyS", - .write = pnx8xxx_console_write, - .device = uart_console_device, - .setup = pnx8xxx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pnx8xxx_reg, -}; - -static int __init pnx8xxx_rs_console_init(void) -{ - pnx8xxx_init_ports(); - register_console(&pnx8xxx_console); - return 0; -} -console_initcall(pnx8xxx_rs_console_init); - -#define PNX8XXX_CONSOLE &pnx8xxx_console -#else -#define PNX8XXX_CONSOLE NULL -#endif - -static struct uart_driver pnx8xxx_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = SERIAL_PNX8XXX_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = PNX8XXX_CONSOLE, -}; - -static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_suspend_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_resume(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_resume_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_probe(struct platform_device *pdev) -{ - struct resource *res = pdev->resource; - int i; - - for (i = 0; i < pdev->num_resources; i++, res++) { - if (!(res->flags & IORESOURCE_MEM)) - continue; - - for (i = 0; i < NR_PORTS; i++) { - if (pnx8xxx_ports[i].port.mapbase != res->start) - continue; - - pnx8xxx_ports[i].port.dev = &pdev->dev; - uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); - platform_set_drvdata(pdev, &pnx8xxx_ports[i]); - break; - } - } - - return 0; -} - -static int pnx8xxx_serial_remove(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&pnx8xxx_reg, &sport->port); - - return 0; -} - -static struct platform_driver pnx8xxx_serial_driver = { - .driver = { - .name = "pnx8xxx-uart", - .owner = THIS_MODULE, - }, - .probe = pnx8xxx_serial_probe, - .remove = pnx8xxx_serial_remove, - .suspend = pnx8xxx_serial_suspend, - .resume = pnx8xxx_serial_resume, -}; - -static int __init pnx8xxx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: PNX8XXX driver\n"); - - pnx8xxx_init_ports(); - - ret = uart_register_driver(&pnx8xxx_reg); - if (ret == 0) { - ret = platform_driver_register(&pnx8xxx_serial_driver); - if (ret) - uart_unregister_driver(&pnx8xxx_reg); - } - return ret; -} - -static void __exit pnx8xxx_serial_exit(void) -{ - platform_driver_unregister(&pnx8xxx_serial_driver); - uart_unregister_driver(&pnx8xxx_reg); -} - -module_init(pnx8xxx_serial_init); -module_exit(pnx8xxx_serial_exit); - -MODULE_AUTHOR("Embedded Alley Solutions, Inc."); -MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); -MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c deleted file mode 100644 index 1102a39..0000000 --- a/drivers/serial/pxa.c +++ /dev/null @@ -1,879 +0,0 @@ -/* - * linux/drivers/serial/pxa.c - * - * Based on drivers/serial/8250.c by Russell King. - * - * Author: Nicolas Pitre - * Created: Feb 20, 2003 - * Copyright: (C) 2003 Monta Vista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Note 1: This driver is made separate from the already too overloaded - * 8250.c because it needs some kirks of its own and that'll make it - * easier to add DMA support. - * - * Note 2: I'm too sick of device allocation policies for serial ports. - * If someone else wants to request an "official" allocation of major/minor - * for this driver please be my guest. And don't forget that new hardware - * to come from Intel might have more than 3 or 4 of those UARTs. Let's - * hope for a better port registration and dynamic device allocation scheme - * with the serial core maintainer satisfaction to appear soon. - */ - - -#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct uart_pxa_port { - struct uart_port port; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; - struct clk *clk; - char *name; -}; - -static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) -{ - offset <<= 2; - return readl(up->port.membase + offset); -} - -static inline void serial_out(struct uart_pxa_port *up, int offset, int value) -{ - offset <<= 2; - writel(value, up->port.membase + offset); -} - -static void serial_pxa_enable_ms(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void serial_pxa_stop_tx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_pxa_stop_rx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static inline void receive_chars(struct uart_pxa_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch, flag; - int max_count = 256; - - do { - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - *status &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_PXA_CONSOLE - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); - - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_pxa_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_pxa_stop_tx(&up->port); - return; - } - - count = up->port.fifosize / 2; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - - if (uart_circ_empty(xmit)) - serial_pxa_stop_tx(&up->port); -} - -static void serial_pxa_start_tx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static inline void check_modem_status(struct uart_pxa_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -/* - * This handles the interrupt from one port. - */ -static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) -{ - struct uart_pxa_port *up = dev_id; - unsigned int iir, lsr; - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - check_modem_status(up); - if (lsr & UART_LSR_THRE) - transmit_chars(up); - return IRQ_HANDLED; -} - -static unsigned int serial_pxa_tx_empty(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_pxa_get_mctrl(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial_pxa_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -#if 0 -static void serial_pxa_dma_init(struct pxa_uart *up) -{ - up->rxdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); - if (up->rxdma < 0) - goto out; - up->txdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); - if (up->txdma < 0) - goto err_txdma; - up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); - if (!up->dmadesc) - goto err_alloc; - - /* ... */ -err_alloc: - pxa_free_dma(up->txdma); -err_rxdma: - pxa_free_dma(up->rxdma); -out: - return; -} -#endif - -static int serial_pxa_startup(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - int retval; - - if (port->line == 3) /* HWUART */ - up->mcr |= UART_MCR_AFE; - else - up->mcr = 0; - - up->port.uartclk = clk_get_rate(up->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); - if (retval) - return retval; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - /* - * Clear the interrupt registers. - */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl |= TIOCM_OUT2; - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; - serial_out(up, UART_IER, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - return 0; -} - -static void serial_pxa_shutdown(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - - free_irq(up->port.irq, up); - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_out(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -static void -serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - unsigned int dll; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; - else if ((up->port.uartclk / quot) < (230400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Ensure the port will be enabled. - * This is required especially for serial console. - */ - up->ier |= UART_IER_UUE; - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characters to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE; - else - up->mcr &= ~UART_MCR_AFE; - - serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - - /* - * work around Errata #75 according to Intel(R) PXA27x Processor Family - * Specification Update (Nov 2005) - */ - dll = serial_in(up, UART_DLL); - WARN_ON(dll != (quot & 0xff)); - - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - serial_out(up, UART_FCR, fcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_pxa_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (!state) - clk_enable(up->clk); - else - clk_disable(up->clk); -} - -static void serial_pxa_release_port(struct uart_port *port) -{ -} - -static int serial_pxa_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_pxa_config_port(struct uart_port *port, int flags) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - up->port.type = PORT_PXA; -} - -static int -serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -static const char * -serial_pxa_type(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - return up->name; -} - -static struct uart_pxa_port *serial_pxa_ports[4]; -static struct uart_driver serial_pxa_reg; - -#ifdef CONFIG_SERIAL_PXA_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_pxa_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void serial_pxa_console_putchar(struct uart_port *port, int ch) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_pxa_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_pxa_port *up = serial_pxa_ports[co->index]; - unsigned int ier; - - clk_enable(up->clk); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, UART_IER_UUE); - - uart_console_write(&up->port, s, count, serial_pxa_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - clk_disable(up->clk); -} - -static int __init -serial_pxa_console_setup(struct console *co, char *options) -{ - struct uart_pxa_port *up; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index == -1 || co->index >= serial_pxa_reg.nr) - co->index = 0; - up = serial_pxa_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console serial_pxa_console = { - .name = "ttyS", - .write = serial_pxa_console_write, - .device = uart_console_device, - .setup = serial_pxa_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_pxa_reg, -}; - -#define PXA_CONSOLE &serial_pxa_console -#else -#define PXA_CONSOLE NULL -#endif - -struct uart_ops serial_pxa_pops = { - .tx_empty = serial_pxa_tx_empty, - .set_mctrl = serial_pxa_set_mctrl, - .get_mctrl = serial_pxa_get_mctrl, - .stop_tx = serial_pxa_stop_tx, - .start_tx = serial_pxa_start_tx, - .stop_rx = serial_pxa_stop_rx, - .enable_ms = serial_pxa_enable_ms, - .break_ctl = serial_pxa_break_ctl, - .startup = serial_pxa_startup, - .shutdown = serial_pxa_shutdown, - .set_termios = serial_pxa_set_termios, - .pm = serial_pxa_pm, - .type = serial_pxa_type, - .release_port = serial_pxa_release_port, - .request_port = serial_pxa_request_port, - .config_port = serial_pxa_config_port, - .verify_port = serial_pxa_verify_port, -}; - -static struct uart_driver serial_pxa_reg = { - .owner = THIS_MODULE, - .driver_name = "PXA serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 4, - .cons = PXA_CONSOLE, -}; - -#ifdef CONFIG_PM -static int serial_pxa_suspend(struct device *dev) -{ - struct uart_pxa_port *sport = dev_get_drvdata(dev); - - if (sport) - uart_suspend_port(&serial_pxa_reg, &sport->port); - - return 0; -} - -static int serial_pxa_resume(struct device *dev) -{ - struct uart_pxa_port *sport = dev_get_drvdata(dev); - - if (sport) - uart_resume_port(&serial_pxa_reg, &sport->port); - - return 0; -} - -static const struct dev_pm_ops serial_pxa_pm_ops = { - .suspend = serial_pxa_suspend, - .resume = serial_pxa_resume, -}; -#endif - -static int serial_pxa_probe(struct platform_device *dev) -{ - struct uart_pxa_port *sport; - struct resource *mmres, *irqres; - int ret; - - mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) - return -ENODEV; - - sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); - if (!sport) - return -ENOMEM; - - sport->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); - goto err_free; - } - - sport->port.type = PORT_PXA; - sport->port.iotype = UPIO_MEM; - sport->port.mapbase = mmres->start; - sport->port.irq = irqres->start; - sport->port.fifosize = 64; - sport->port.ops = &serial_pxa_pops; - sport->port.line = dev->id; - sport->port.dev = &dev->dev; - sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - sport->port.uartclk = clk_get_rate(sport->clk); - - switch (dev->id) { - case 0: sport->name = "FFUART"; break; - case 1: sport->name = "BTUART"; break; - case 2: sport->name = "STUART"; break; - case 3: sport->name = "HWUART"; break; - default: - sport->name = "???"; - break; - } - - sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); - if (!sport->port.membase) { - ret = -ENOMEM; - goto err_clk; - } - - serial_pxa_ports[dev->id] = sport; - - uart_add_one_port(&serial_pxa_reg, &sport->port); - platform_set_drvdata(dev, sport); - - return 0; - - err_clk: - clk_put(sport->clk); - err_free: - kfree(sport); - return ret; -} - -static int serial_pxa_remove(struct platform_device *dev) -{ - struct uart_pxa_port *sport = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - uart_remove_one_port(&serial_pxa_reg, &sport->port); - clk_put(sport->clk); - kfree(sport); - - return 0; -} - -static struct platform_driver serial_pxa_driver = { - .probe = serial_pxa_probe, - .remove = serial_pxa_remove, - - .driver = { - .name = "pxa2xx-uart", - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &serial_pxa_pm_ops, -#endif - }, -}; - -int __init serial_pxa_init(void) -{ - int ret; - - ret = uart_register_driver(&serial_pxa_reg); - if (ret != 0) - return ret; - - ret = platform_driver_register(&serial_pxa_driver); - if (ret != 0) - uart_unregister_driver(&serial_pxa_reg); - - return ret; -} - -void __exit serial_pxa_exit(void) -{ - platform_driver_unregister(&serial_pxa_driver); - uart_unregister_driver(&serial_pxa_reg); -} - -module_init(serial_pxa_init); -module_exit(serial_pxa_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c deleted file mode 100644 index fed1a9a..0000000 --- a/drivers/serial/s3c2400.c +++ /dev/null @@ -1,106 +0,0 @@ -/* linux/drivers/serial/s3c240.c - * - * Driver for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include - -#include -#include - -#include "samsung.h" - -static int s3c2400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - clk->divisor = 1; - clk->name = "pclk"; - - return 0; -} - -static int s3c2400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - return 0; -} - -static int s3c2400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2400_uart_inf = { - .name = "Samsung S3C2400 UART", - .type = PORT_S3C2400, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2400_serial_getsource, - .set_clksrc = s3c2400_serial_setsource, - .reset_port = s3c2400_serial_resetport, -}; - -static int s3c2400_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); -} - -static struct platform_driver s3c2400_serial_driver = { - .probe = s3c2400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2400-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf); - -static inline int s3c2400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf); -} - -static inline void s3c2400_serial_exit(void) -{ - platform_driver_unregister(&s3c2400_serial_driver); -} - -module_init(s3c2400_serial_init); -module_exit(s3c2400_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2400-uart"); diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c deleted file mode 100644 index 73f089d..0000000 --- a/drivers/serial/s3c2410.c +++ /dev/null @@ -1,118 +0,0 @@ -/* linux/drivers/serial/s3c2410.c - * - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf); - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c deleted file mode 100644 index 1700b1a..0000000 --- a/drivers/serial/s3c2412.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/drivers/serial/s3c2412.c - * - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf); - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c deleted file mode 100644 index 094cc39..0000000 --- a/drivers/serial/s3c2440.c +++ /dev/null @@ -1,181 +0,0 @@ -/* linux/drivers/serial/s3c2440.c - * - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf); - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c deleted file mode 100644 index fad6083..0000000 --- a/drivers/serial/s3c24a0.c +++ /dev/null @@ -1,118 +0,0 @@ -/* linux/drivers/serial/s3c24a0.c - * - * Driver for Samsung S3C24A0 SoC onboard UARTs. - * - * Based on drivers/serial/s3c2410.c - * - * Author: Sandeep Patil - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include "samsung.h" - -static int s3c24a0_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c24a0_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c24a0_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c24a0_uart_inf = { - .name = "Samsung S3C24A0 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C24A0_UFSTAT_RXMASK, - .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, - .rx_fifofull = S3C24A0_UFSTAT_RXFULL, - .tx_fifofull = S3C24A0_UFSTAT_TXFULL, - .tx_fifomask = S3C24A0_UFSTAT_TXMASK, - .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, - .get_clksrc = s3c24a0_serial_getsource, - .set_clksrc = s3c24a0_serial_setsource, - .reset_port = s3c24a0_serial_resetport, -}; - -static int s3c24a0_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); -} - -static struct platform_driver s3c24a0_serial_driver = { - .probe = s3c24a0_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c24a0-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); - -static int __init s3c24a0_serial_init(void) -{ - return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); -} - -static void __exit s3c24a0_serial_exit(void) -{ - platform_driver_unregister(&s3c24a0_serial_driver); -} - -module_init(s3c24a0_serial_init); -module_exit(s3c24a0_serial_exit); - diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c deleted file mode 100644 index 4be92ab..0000000 --- a/drivers/serial/s3c6400.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/drivers/serial/s3c6400.c - * - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf); - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c deleted file mode 100644 index 6ebccd7..0000000 --- a/drivers/serial/s5pv210.c +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/drivers/serial/s5pv210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if ((cfg->clocks_size) == 1) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if ((cfg->clocks_size) == 1) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5pv210_serial_console_init(void) -{ - return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf); -} - -console_initcall(s5pv210_serial_console_init); - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham "); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c deleted file mode 100644 index 2199d81..0000000 --- a/drivers/serial/sa1100.c +++ /dev/null @@ -1,918 +0,0 @@ -/* - * linux/drivers/char/sa1100.c - * - * Driver for SA11x0 serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_SA1100_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 3 - -#define SA1100_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to UTSR[01] - */ -#define SM_TO_UTSR0(x) ((x) & 0xff) -#define SM_TO_UTSR1(x) ((x) >> 8) -#define UTSR0_TO_SM(x) ((x)) -#define UTSR1_TO_SM(x) ((x) << 8) - -#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) -#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) -#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) -#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) -#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) -#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) -#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) - -#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) -#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) -#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) -#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) -#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) -#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) -#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x24 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -struct sa1100_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; -}; - -/* - * Handle any change of modem status signal since we were last called. - */ -static void sa1100_mctrl_check(struct sa1100_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void sa1100_timeout(unsigned long data) -{ - struct sa1100_port *sport = (struct sa1100_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - sa1100_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void sa1100_stop_tx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); - sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); -} - -/* - * port locked and interrupts disabled - */ -static void sa1100_start_tx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); - UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); -} - -/* - * Interrupts enabled - */ -static void sa1100_stop_rx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void sa1100_enable_ms(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static void -sa1100_rx_chars(struct sa1100_port *sport) -{ - struct tty_struct *tty = sport->port.state->port.tty; - unsigned int status, ch, flg; - - status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | - UTSR0_TO_SM(UART_GET_UTSR0(sport)); - while (status & UTSR1_TO_SM(UTSR1_RNE)) { - ch = UART_GET_CHAR(sport); - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) { - if (status & UTSR1_TO_SM(UTSR1_PRE)) - sport->port.icount.parity++; - else if (status & UTSR1_TO_SM(UTSR1_FRE)) - sport->port.icount.frame++; - if (status & UTSR1_TO_SM(UTSR1_ROR)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & UTSR1_TO_SM(UTSR1_PRE)) - flg = TTY_PARITY; - else if (status & UTSR1_TO_SM(UTSR1_FRE)) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); - - ignore_char: - status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | - UTSR0_TO_SM(UART_GET_UTSR0(sport)); - } - tty_flip_buffer_push(tty); -} - -static void sa1100_tx_chars(struct sa1100_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - UART_PUT_CHAR(sport, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - sa1100_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - sa1100_stop_tx(&sport->port); - return; - } - - /* - * Tried using FIFO (not checking TNF) for fifo fill: - * still had the '4 bytes repeated' problem. - */ - while (UART_GET_UTSR1(sport) & UTSR1_TNF) { - UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - sa1100_stop_tx(&sport->port); -} - -static irqreturn_t sa1100_int(int irq, void *dev_id) -{ - struct sa1100_port *sport = dev_id; - unsigned int status, pass_counter = 0; - - spin_lock(&sport->port.lock); - status = UART_GET_UTSR0(sport); - status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; - do { - if (status & (UTSR0_RFS | UTSR0_RID)) { - /* Clear the receiver idle bit, if set */ - if (status & UTSR0_RID) - UART_PUT_UTSR0(sport, UTSR0_RID); - sa1100_rx_chars(sport); - } - - /* Clear the relevant break bits */ - if (status & (UTSR0_RBB | UTSR0_REB)) - UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); - - if (status & UTSR0_RBB) - sport->port.icount.brk++; - - if (status & UTSR0_REB) - uart_handle_break(&sport->port); - - if (status & UTSR0_TFS) - sa1100_tx_chars(sport); - if (pass_counter++ > SA1100_ISR_PASS_LIMIT) - break; - status = UART_GET_UTSR0(sport); - status &= SM_TO_UTSR0(sport->port.read_status_mask) | - ~UTSR0_TFS; - } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); - spin_unlock(&sport->port.lock); - - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int sa1100_tx_empty(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; -} - -static unsigned int sa1100_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/* - * Interrupts always disabled. - */ -static void sa1100_break_ctl(struct uart_port *port, int break_state) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - unsigned long flags; - unsigned int utcr3; - - spin_lock_irqsave(&sport->port.lock, flags); - utcr3 = UART_GET_UTCR3(sport); - if (break_state == -1) - utcr3 |= UTCR3_BRK; - else - utcr3 &= ~UTCR3_BRK; - UART_PUT_UTCR3(sport, utcr3); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int sa1100_startup(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, sa1100_int, 0, - "sa11x0-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - UART_PUT_UTSR0(sport, -1); - UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - sa1100_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void sa1100_shutdown(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); - - /* - * Disable all interrupts, port and break condition. - */ - UART_PUT_UTCR3(sport, 0); -} - -static void -sa1100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - unsigned long flags; - unsigned int utcr0, old_utcr3, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - utcr0 = UTCR0_DSS; - else - utcr0 = 0; - - if (termios->c_cflag & CSTOPB) - utcr0 |= UTCR0_SBS; - if (termios->c_cflag & PARENB) { - utcr0 |= UTCR0_PE; - if (!(termios->c_cflag & PARODD)) - utcr0 |= UTCR0_OES; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); - sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= - UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - UTSR1_TO_SM(UTSR1_ROR); - } - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); - - while (UART_GET_UTSR1(sport) & UTSR1_TBY) - barrier(); - - /* then, disable everything */ - UART_PUT_UTCR3(sport, 0); - - /* set the parity, stop bits and data size */ - UART_PUT_UTCR0(sport, utcr0); - - /* set the baud rate */ - quot -= 1; - UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); - UART_PUT_UTCR2(sport, (quot & 0xff)); - - UART_PUT_UTSR0(sport, -1); - - UART_PUT_UTCR3(sport, old_utcr3); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - sa1100_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *sa1100_type(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void sa1100_release_port(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int sa1100_request_port(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "sa11x0-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void sa1100_config_port(struct uart_port *port, int flags) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - if (flags & UART_CONFIG_TYPE && - sa1100_request_port(&sport->port) == 0) - sport->port.type = PORT_SA1100; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_SA1100 and PORT_UNKNOWN - */ -static int -sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops sa1100_pops = { - .tx_empty = sa1100_tx_empty, - .set_mctrl = sa1100_set_mctrl, - .get_mctrl = sa1100_get_mctrl, - .stop_tx = sa1100_stop_tx, - .start_tx = sa1100_start_tx, - .stop_rx = sa1100_stop_rx, - .enable_ms = sa1100_enable_ms, - .break_ctl = sa1100_break_ctl, - .startup = sa1100_startup, - .shutdown = sa1100_shutdown, - .set_termios = sa1100_set_termios, - .type = sa1100_type, - .release_port = sa1100_release_port, - .request_port = sa1100_request_port, - .config_port = sa1100_config_port, - .verify_port = sa1100_verify_port, -}; - -static struct sa1100_port sa1100_ports[NR_PORTS]; - -/* - * Setup the SA1100 serial ports. Note that we don't include the IrDA - * port here since we have our own SIR/FIR driver (see drivers/net/irda) - * - * Note also that we support "console=ttySAx" where "x" is either 0 or 1. - * Which serial port this ends up being depends on the machine you're - * running this kernel on. I'm not convinced that this is a good idea, - * but that's the way it traditionally works. - * - * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer - * used here. - */ -static void __init sa1100_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - sa1100_ports[i].port.uartclk = 3686400; - sa1100_ports[i].port.ops = &sa1100_pops; - sa1100_ports[i].port.fifosize = 8; - sa1100_ports[i].port.line = i; - sa1100_ports[i].port.iotype = UPIO_MEM; - init_timer(&sa1100_ports[i].timer); - sa1100_ports[i].timer.function = sa1100_timeout; - sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; - } - - /* - * make transmit lines outputs, so that when the port - * is closed, the output is in the MARK state. - */ - PPDR |= PPC_TXD1 | PPC_TXD3; - PPSR |= PPC_TXD1 | PPC_TXD3; -} - -void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) -{ - if (fns->get_mctrl) - sa1100_pops.get_mctrl = fns->get_mctrl; - if (fns->set_mctrl) - sa1100_pops.set_mctrl = fns->set_mctrl; - - sa1100_pops.pm = fns->pm; - sa1100_pops.set_wake = fns->set_wake; -} - -void __init sa1100_register_uart(int idx, int port) -{ - if (idx >= NR_PORTS) { - printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); - return; - } - - switch (port) { - case 1: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; - sa1100_ports[idx].port.mapbase = _Ser1UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser1UART; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - case 2: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; - sa1100_ports[idx].port.mapbase = _Ser2UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser2ICP; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - case 3: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; - sa1100_ports[idx].port.mapbase = _Ser3UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser3UART; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - default: - printk(KERN_ERR "%s: bad port number %d\n", __func__, port); - } -} - - -#ifdef CONFIG_SERIAL_SA1100_CONSOLE -static void sa1100_console_putchar(struct uart_port *port, int ch) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) - barrier(); - UART_PUT_CHAR(sport, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void -sa1100_console_write(struct console *co, const char *s, unsigned int count) -{ - struct sa1100_port *sport = &sa1100_ports[co->index]; - unsigned int old_utcr3, status; - - /* - * First, save UTCR3 and then disable interrupts - */ - old_utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | - UTCR3_TXE); - - uart_console_write(&sport->port, s, count, sa1100_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore UTCR3 - */ - do { - status = UART_GET_UTSR1(sport); - } while (status & UTSR1_TBY); - UART_PUT_UTCR3(sport, old_utcr3); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -sa1100_console_get_options(struct sa1100_port *sport, int *baud, - int *parity, int *bits) -{ - unsigned int utcr3; - - utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); - if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { - /* ok, the port was enabled */ - unsigned int utcr0, quot; - - utcr0 = UART_GET_UTCR0(sport); - - *parity = 'n'; - if (utcr0 & UTCR0_PE) { - if (utcr0 & UTCR0_OES) - *parity = 'e'; - else - *parity = 'o'; - } - - if (utcr0 & UTCR0_DSS) - *bits = 8; - else - *bits = 7; - - quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; - quot &= 0xfff; - *baud = sport->port.uartclk / (16 * (quot + 1)); - } -} - -static int __init -sa1100_console_setup(struct console *co, char *options) -{ - struct sa1100_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &sa1100_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - sa1100_console_get_options(sport, &baud, &parity, &bits); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver sa1100_reg; -static struct console sa1100_console = { - .name = "ttySA", - .write = sa1100_console_write, - .device = uart_console_device, - .setup = sa1100_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sa1100_reg, -}; - -static int __init sa1100_rs_console_init(void) -{ - sa1100_init_ports(); - register_console(&sa1100_console); - return 0; -} -console_initcall(sa1100_rs_console_init); - -#define SA1100_CONSOLE &sa1100_console -#else -#define SA1100_CONSOLE NULL -#endif - -static struct uart_driver sa1100_reg = { - .owner = THIS_MODULE, - .driver_name = "ttySA", - .dev_name = "ttySA", - .major = SERIAL_SA1100_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = SA1100_CONSOLE, -}; - -static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state) -{ - struct sa1100_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_suspend_port(&sa1100_reg, &sport->port); - - return 0; -} - -static int sa1100_serial_resume(struct platform_device *dev) -{ - struct sa1100_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_resume_port(&sa1100_reg, &sport->port); - - return 0; -} - -static int sa1100_serial_probe(struct platform_device *dev) -{ - struct resource *res = dev->resource; - int i; - - for (i = 0; i < dev->num_resources; i++, res++) - if (res->flags & IORESOURCE_MEM) - break; - - if (i < dev->num_resources) { - for (i = 0; i < NR_PORTS; i++) { - if (sa1100_ports[i].port.mapbase != res->start) - continue; - - sa1100_ports[i].port.dev = &dev->dev; - uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); - platform_set_drvdata(dev, &sa1100_ports[i]); - break; - } - } - - return 0; -} - -static int sa1100_serial_remove(struct platform_device *pdev) -{ - struct sa1100_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&sa1100_reg, &sport->port); - - return 0; -} - -static struct platform_driver sa11x0_serial_driver = { - .probe = sa1100_serial_probe, - .remove = sa1100_serial_remove, - .suspend = sa1100_serial_suspend, - .resume = sa1100_serial_resume, - .driver = { - .name = "sa11x0-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init sa1100_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: SA11x0 driver\n"); - - sa1100_init_ports(); - - ret = uart_register_driver(&sa1100_reg); - if (ret == 0) { - ret = platform_driver_register(&sa11x0_serial_driver); - if (ret) - uart_unregister_driver(&sa1100_reg); - } - return ret; -} - -static void __exit sa1100_serial_exit(void) -{ - platform_driver_unregister(&sa11x0_serial_driver); - uart_unregister_driver(&sa1100_reg); -} - -module_init(sa1100_serial_init); -module_exit(sa1100_serial_exit); - -MODULE_AUTHOR("Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("SA1100 generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); -MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c deleted file mode 100644 index 7ac2bf5..0000000 --- a/drivers/serial/samsung.c +++ /dev/null @@ -1,1487 +0,0 @@ -/* linux/drivers/serial/samsuing.c - * - * Driver core for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Hote on 2410 error handling - * - * The s3c2410 manual has a love/hate affair with the contents of the - * UERSTAT register in the UART blocks, and keeps marking some of the - * error bits as reserved. Having checked with the s3c2410x01, - * it copes with BREAKs properly, so I am happy to ignore the RESERVED - * feature from the latter versions of the manual. - * - * If it becomes aparrent that latter versions of the 2410 remove these - * bits, then action will have to be taken to differentiate the versions - * and change the policy on BREAK - * - * BJD, 04-Nov-2004 -*/ - -#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include - -#include "samsung.h" - -/* UART name and device definitions */ - -#define S3C24XX_SERIAL_NAME "ttySAC" -#define S3C24XX_SERIAL_MAJOR 204 -#define S3C24XX_SERIAL_MINOR 64 - -/* macros to change one thing to another */ - -#define tx_enabled(port) ((port)->unused[0]) -#define rx_enabled(port) ((port)->unused[1]) - -/* flag to ignore all characters comming in */ -#define RXSTAT_DUMMY_READ (0x10000000) - -static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) -{ - return container_of(port, struct s3c24xx_uart_port, port); -} - -/* translate a port to the device name */ - -static inline const char *s3c24xx_serial_portname(struct uart_port *port) -{ - return to_platform_device(port->dev)->name; -} - -static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) -{ - return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); -} - -static void s3c24xx_serial_rx_enable(struct uart_port *port) -{ - unsigned long flags; - unsigned int ucon, ufcon; - int count = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (--count && !s3c24xx_serial_txempty_nofifo(port)) - udelay(100); - - ufcon = rd_regl(port, S3C2410_UFCON); - ufcon |= S3C2410_UFCON_RESETRX; - wr_regl(port, S3C2410_UFCON, ufcon); - - ucon = rd_regl(port, S3C2410_UCON); - ucon |= S3C2410_UCON_RXIRQMODE; - wr_regl(port, S3C2410_UCON, ucon); - - rx_enabled(port) = 1; - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_rx_disable(struct uart_port *port) -{ - unsigned long flags; - unsigned int ucon; - - spin_lock_irqsave(&port->lock, flags); - - ucon = rd_regl(port, S3C2410_UCON); - ucon &= ~S3C2410_UCON_RXIRQMODE; - wr_regl(port, S3C2410_UCON, ucon); - - rx_enabled(port) = 0; - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_stop_tx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (tx_enabled(port)) { - disable_irq_nosync(ourport->tx_irq); - tx_enabled(port) = 0; - if (port->flags & UPF_CONS_FLOW) - s3c24xx_serial_rx_enable(port); - } -} - -static void s3c24xx_serial_start_tx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (!tx_enabled(port)) { - if (port->flags & UPF_CONS_FLOW) - s3c24xx_serial_rx_disable(port); - - enable_irq(ourport->tx_irq); - tx_enabled(port) = 1; - } -} - - -static void s3c24xx_serial_stop_rx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (rx_enabled(port)) { - dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq_nosync(ourport->rx_irq); - rx_enabled(port) = 0; - } -} - -static void s3c24xx_serial_enable_ms(struct uart_port *port) -{ -} - -static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) -{ - return to_ourport(port)->info; -} - -static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) -{ - if (port->dev == NULL) - return NULL; - - return (struct s3c2410_uartcfg *)port->dev->platform_data; -} - -static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, - unsigned long ufstat) -{ - struct s3c24xx_uart_info *info = ourport->info; - - if (ufstat & info->rx_fifofull) - return info->fifosize; - - return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; -} - - -/* ? - where has parity gone?? */ -#define S3C2410_UERSTAT_PARITY (0x1000) - -static irqreturn_t -s3c24xx_serial_rx_chars(int irq, void *dev_id) -{ - struct s3c24xx_uart_port *ourport = dev_id; - struct uart_port *port = &ourport->port; - struct tty_struct *tty = port->state->port.tty; - unsigned int ufcon, ch, flag, ufstat, uerstat; - int max_count = 64; - - while (max_count-- > 0) { - ufcon = rd_regl(port, S3C2410_UFCON); - ufstat = rd_regl(port, S3C2410_UFSTAT); - - if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) - break; - - uerstat = rd_regl(port, S3C2410_UERSTAT); - ch = rd_regb(port, S3C2410_URXH); - - if (port->flags & UPF_CONS_FLOW) { - int txe = s3c24xx_serial_txempty_nofifo(port); - - if (rx_enabled(port)) { - if (!txe) { - rx_enabled(port) = 0; - continue; - } - } else { - if (txe) { - ufcon |= S3C2410_UFCON_RESETRX; - wr_regl(port, S3C2410_UFCON, ufcon); - rx_enabled(port) = 1; - goto out; - } - continue; - } - } - - /* insert the character into the buffer */ - - flag = TTY_NORMAL; - port->icount.rx++; - - if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { - dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", - ch, uerstat); - - /* check for break */ - if (uerstat & S3C2410_UERSTAT_BREAK) { - dbg("break!\n"); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } - - if (uerstat & S3C2410_UERSTAT_FRAME) - port->icount.frame++; - if (uerstat & S3C2410_UERSTAT_OVERRUN) - port->icount.overrun++; - - uerstat &= port->read_status_mask; - - if (uerstat & S3C2410_UERSTAT_BREAK) - flag = TTY_BREAK; - else if (uerstat & S3C2410_UERSTAT_PARITY) - flag = TTY_PARITY; - else if (uerstat & (S3C2410_UERSTAT_FRAME | - S3C2410_UERSTAT_OVERRUN)) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, - ch, flag); - - ignore_char: - continue; - } - tty_flip_buffer_push(tty); - - out: - return IRQ_HANDLED; -} - -static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) -{ - struct s3c24xx_uart_port *ourport = id; - struct uart_port *port = &ourport->port; - struct circ_buf *xmit = &port->state->xmit; - int count = 256; - - if (port->x_char) { - wr_regb(port, S3C2410_UTXH, port->x_char); - port->icount.tx++; - port->x_char = 0; - goto out; - } - - /* if there isnt anything more to transmit, or the uart is now - * stopped, disable the uart and exit - */ - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - s3c24xx_serial_stop_tx(port); - goto out; - } - - /* try and drain the buffer... */ - - while (!uart_circ_empty(xmit) && count-- > 0) { - if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) - break; - - wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - s3c24xx_serial_stop_tx(port); - - out: - return IRQ_HANDLED; -} - -static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); - unsigned long ufcon = rd_regl(port, S3C2410_UFCON); - - if (ufcon & S3C2410_UFCON_FIFOMODE) { - if ((ufstat & info->tx_fifomask) != 0 || - (ufstat & info->tx_fifofull)) - return 0; - - return 1; - } - - return s3c24xx_serial_txempty_nofifo(port); -} - -/* no modem control lines */ -static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) -{ - unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); - - if (umstat & S3C2410_UMSTAT_CTS) - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; - else - return TIOCM_CAR | TIOCM_DSR; -} - -static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* todo - possibly remove AFC and do manual CTS */ -} - -static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int ucon; - - spin_lock_irqsave(&port->lock, flags); - - ucon = rd_regl(port, S3C2410_UCON); - - if (break_state) - ucon |= S3C2410_UCON_SBREAK; - else - ucon &= ~S3C2410_UCON_SBREAK; - - wr_regl(port, S3C2410_UCON, ucon); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_shutdown(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (ourport->tx_claimed) { - free_irq(ourport->tx_irq, ourport); - tx_enabled(port) = 0; - ourport->tx_claimed = 0; - } - - if (ourport->rx_claimed) { - free_irq(ourport->rx_irq, ourport); - ourport->rx_claimed = 0; - rx_enabled(port) = 0; - } -} - - -static int s3c24xx_serial_startup(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - int ret; - - dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", - port->mapbase, port->membase); - - rx_enabled(port) = 1; - - ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret != 0) { - printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); - return ret; - } - - ourport->rx_claimed = 1; - - dbg("requesting tx irq...\n"); - - tx_enabled(port) = 1; - - ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret) { - printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); - goto err; - } - - ourport->tx_claimed = 1; - - dbg("s3c24xx_serial_startup ok\n"); - - /* the port reset code should have done the correct - * register setup for the port controls */ - - return ret; - - err: - s3c24xx_serial_shutdown(port); - return ret; -} - -/* power power management control */ - -static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, - unsigned int old) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - ourport->pm_level = level; - - switch (level) { - case 3: - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) - clk_disable(ourport->baudclk); - - clk_disable(ourport->clk); - break; - - case 0: - clk_enable(ourport->clk); - - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) - clk_enable(ourport->baudclk); - - break; - default: - printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); - } -} - -/* baud rate calculation - * - * The UARTs on the S3C2410/S3C2440 can take their clocks from a number - * of different sources, including the peripheral clock ("pclk") and an - * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") - * with a programmable extra divisor. - * - * The following code goes through the clock sources, and calculates the - * baud clocks (and the resultant actual baud rates) and then tries to - * pick the closest one and select that. - * -*/ - - -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->set_clksrc)(port, c); -} - -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; - - calc->clksrc = clksrc; - - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } - - calc->quot--; - return 1; -} - -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) -{ - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk - */ - - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; - } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; - - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; - - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } - } - } - - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; -} - -/* udivslot_table[] - * - * This table takes the fractional value of the baud divisor and gives - * the recommended setting for the UDIVSLOT register. - */ -static u16 udivslot_table[16] = { - [0] = 0x0000, - [1] = 0x0080, - [2] = 0x0808, - [3] = 0x0888, - [4] = 0x2222, - [5] = 0x4924, - [6] = 0x4A52, - [7] = 0x54AA, - [8] = 0x5555, - [9] = 0xD555, - [10] = 0xD5D5, - [11] = 0xDDD5, - [12] = 0xDDDD, - [13] = 0xDFDD, - [14] = 0xDFDF, - [15] = 0xFFDF, -}; - -static void s3c24xx_serial_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; - struct clk *clk = NULL; - unsigned long flags; - unsigned int baud, quot; - unsigned int ulcon; - unsigned int umcon; - unsigned int udivslot = 0; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CMSPAR); - termios->c_cflag |= CLOCAL; - - /* - * Ask the core to calculate the divisor for us. - */ - - baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - - if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) - quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); - - /* check to see if we need to change clock source */ - - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); - - if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { - clk_disable(ourport->baudclk); - ourport->baudclk = NULL; - } - - clk_enable(clk); - - ourport->clksrc = clksrc; - ourport->baudclk = clk; - ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; - } - - if (ourport->info->has_divslot) { - unsigned int div = ourport->baudclk_rate / baud; - - if (cfg->has_fracval) { - udivslot = (div & 15); - dbg("fracval = %04x\n", udivslot); - } else { - udivslot = udivslot_table[div & 15]; - dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); - } - } - - switch (termios->c_cflag & CSIZE) { - case CS5: - dbg("config: 5bits/char\n"); - ulcon = S3C2410_LCON_CS5; - break; - case CS6: - dbg("config: 6bits/char\n"); - ulcon = S3C2410_LCON_CS6; - break; - case CS7: - dbg("config: 7bits/char\n"); - ulcon = S3C2410_LCON_CS7; - break; - case CS8: - default: - dbg("config: 8bits/char\n"); - ulcon = S3C2410_LCON_CS8; - break; - } - - /* preserve original lcon IR settings */ - ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); - - if (termios->c_cflag & CSTOPB) - ulcon |= S3C2410_LCON_STOPB; - - umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; - - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & PARODD) - ulcon |= S3C2410_LCON_PODD; - else - ulcon |= S3C2410_LCON_PEVEN; - } else { - ulcon |= S3C2410_LCON_PNONE; - } - - spin_lock_irqsave(&port->lock, flags); - - dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", - ulcon, quot, udivslot); - - wr_regl(port, S3C2410_ULCON, ulcon); - wr_regl(port, S3C2410_UBRDIV, quot); - wr_regl(port, S3C2410_UMCON, umcon); - - if (ourport->info->has_divslot) - wr_regl(port, S3C2443_DIVSLOT, udivslot); - - dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", - rd_regl(port, S3C2410_ULCON), - rd_regl(port, S3C2410_UCON), - rd_regl(port, S3C2410_UFCON)); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Which character status flags are we interested in? - */ - port->read_status_mask = S3C2410_UERSTAT_OVERRUN; - if (termios->c_iflag & INPCK) - port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; - - /* - * Which character status flags should we ignore? - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; - if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) - port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RXSTAT_DUMMY_READ; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *s3c24xx_serial_type(struct uart_port *port) -{ - switch (port->type) { - case PORT_S3C2410: - return "S3C2410"; - case PORT_S3C2440: - return "S3C2440"; - case PORT_S3C2412: - return "S3C2412"; - case PORT_S3C6400: - return "S3C6400/10"; - default: - return NULL; - } -} - -#define MAP_SIZE (0x100) - -static void s3c24xx_serial_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, MAP_SIZE); -} - -static int s3c24xx_serial_request_port(struct uart_port *port) -{ - const char *name = s3c24xx_serial_portname(port); - return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; -} - -static void s3c24xx_serial_config_port(struct uart_port *port, int flags) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - if (flags & UART_CONFIG_TYPE && - s3c24xx_serial_request_port(port) == 0) - port->type = info->type; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int -s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - if (ser->type != PORT_UNKNOWN && ser->type != info->type) - return -EINVAL; - - return 0; -} - - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -static struct console s3c24xx_serial_console; - -#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console -#else -#define S3C24XX_SERIAL_CONSOLE NULL -#endif - -static struct uart_ops s3c24xx_serial_ops = { - .pm = s3c24xx_serial_pm, - .tx_empty = s3c24xx_serial_tx_empty, - .get_mctrl = s3c24xx_serial_get_mctrl, - .set_mctrl = s3c24xx_serial_set_mctrl, - .stop_tx = s3c24xx_serial_stop_tx, - .start_tx = s3c24xx_serial_start_tx, - .stop_rx = s3c24xx_serial_stop_rx, - .enable_ms = s3c24xx_serial_enable_ms, - .break_ctl = s3c24xx_serial_break_ctl, - .startup = s3c24xx_serial_startup, - .shutdown = s3c24xx_serial_shutdown, - .set_termios = s3c24xx_serial_set_termios, - .type = s3c24xx_serial_type, - .release_port = s3c24xx_serial_release_port, - .request_port = s3c24xx_serial_request_port, - .config_port = s3c24xx_serial_config_port, - .verify_port = s3c24xx_serial_verify_port, -}; - - -static struct uart_driver s3c24xx_uart_drv = { - .owner = THIS_MODULE, - .dev_name = "s3c2410_serial", - .nr = CONFIG_SERIAL_SAMSUNG_UARTS, - .cons = S3C24XX_SERIAL_CONSOLE, - .driver_name = S3C24XX_SERIAL_NAME, - .major = S3C24XX_SERIAL_MAJOR, - .minor = S3C24XX_SERIAL_MINOR, -}; - -static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { - [0] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX0, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - } - }, - [1] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX1, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - } - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 - - [2] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX2, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - } - }, -#endif -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [3] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX3, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 3, - } - } -#endif -}; - -/* s3c24xx_serial_resetport - * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) -*/ - -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->reset_port)(port, cfg); -} - - -#ifdef CONFIG_CPU_FREQ - -static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, - unsigned long val, void *data) -{ - struct s3c24xx_uart_port *port; - struct uart_port *uport; - - port = container_of(nb, struct s3c24xx_uart_port, freq_transition); - uport = &port->port; - - /* check to see if port is enabled */ - - if (port->pm_level != 0) - return 0; - - /* try and work out if the baudrate is changing, we can detect - * a change in rate, but we do not have support for detecting - * a disturbance in the clock-rate over the change. - */ - - if (IS_ERR(port->clk)) - goto exit; - - if (port->baudclk_rate == clk_get_rate(port->clk)) - goto exit; - - if (val == CPUFREQ_PRECHANGE) { - /* we should really shut the port down whilst the - * frequency change is in progress. */ - - } else if (val == CPUFREQ_POSTCHANGE) { - struct ktermios *termios; - struct tty_struct *tty; - - if (uport->state == NULL) - goto exit; - - tty = uport->state->port.tty; - - if (tty == NULL) - goto exit; - - termios = tty->termios; - - if (termios == NULL) { - printk(KERN_WARNING "%s: no termios?\n", __func__); - goto exit; - } - - s3c24xx_serial_set_termios(uport, termios, NULL); - } - - exit: - return 0; -} - -static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) -{ - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; - - return cpufreq_register_notifier(&port->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) -{ - cpufreq_unregister_notifier(&port->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -#else -static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) -{ - return 0; -} - -static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) -{ -} -#endif - -/* s3c24xx_serial_init_port - * - * initialise a single serial port from the platform device given - */ - -static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, - struct platform_device *platdev) -{ - struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; - struct resource *res; - int ret; - - dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); - - if (platdev == NULL) - return -ENODEV; - - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - - if (port->mapbase != 0) - return 0; - - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - - /* setup info for port */ - port->dev = &platdev->dev; - ourport->info = info; - - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - - port->uartclk = 1; - - if (cfg->uart_flags & UPF_CONS_FLOW) { - dbg("s3c24xx_serial_init_port: enabling flow control\n"); - port->flags |= UPF_CONS_FLOW; - } - - /* sort our the physical and virtual addresses for each UART */ - - res = platform_get_resource(platdev, IORESOURCE_MEM, 0); - if (res == NULL) { - printk(KERN_ERR "failed to find memory resource for uart\n"); - return -EINVAL; - } - - dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); - - port->mapbase = res->start; - port->membase = S3C_VA_UART + (res->start & 0xfffff); - ret = platform_get_irq(platdev, 0); - if (ret < 0) - port->irq = 0; - else { - port->irq = ret; - ourport->rx_irq = ret; - ourport->tx_irq = ret + 1; - } - - ret = platform_get_irq(platdev, 1); - if (ret > 0) - ourport->tx_irq = ret; - - ourport->clk = clk_get(&platdev->dev, "uart"); - - dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", - port->mapbase, port->membase, port->irq, - ourport->rx_irq, ourport->tx_irq, port->uartclk); - - /* reset the fifos (and setup the uart) */ - s3c24xx_serial_resetport(port, cfg); - return 0; -} - -static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct uart_port *port = s3c24xx_dev_to_port(dev); - struct s3c24xx_uart_port *ourport = to_ourport(port); - - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); -} - -static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); - -/* Device driver serial port probe */ - -static int probe_index; - -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) -{ - struct s3c24xx_uart_port *ourport; - int ret; - - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); - - ourport = &s3c24xx_serial_ports[probe_index]; - probe_index++; - - dbg("%s: initialising port %p...\n", __func__, ourport); - - ret = s3c24xx_serial_init_port(ourport, info, dev); - if (ret < 0) - goto probe_err; - - dbg("%s: adding port\n", __func__); - uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); - - ret = device_create_file(&dev->dev, &dev_attr_clock_source); - if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); - - ret = s3c24xx_serial_cpufreq_register(ourport); - if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); - - return 0; - - probe_err: - return ret; -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - - if (port) { - s3c24xx_serial_cpufreq_deregister(to_ourport(port)); - device_remove_file(&dev->dev, &dev_attr_clock_source); - uart_remove_one_port(&s3c24xx_uart_drv, port); - } - - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - -/* UART power management code */ - -#ifdef CONFIG_PM - -static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - - if (port) - uart_suspend_port(&s3c24xx_uart_drv, port); - - return 0; -} - -static int s3c24xx_serial_resume(struct platform_device *dev) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (port) { - clk_enable(ourport->clk); - s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); - clk_disable(ourport->clk); - - uart_resume_port(&s3c24xx_uart_drv, port); - } - - return 0; -} -#endif - -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - -#ifdef CONFIG_PM - drv->suspend = s3c24xx_serial_suspend; - drv->resume = s3c24xx_serial_resume; -#endif - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - -/* Console code */ - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -static struct uart_port *cons_uart; - -static int -s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - unsigned long ufstat, utrstat; - - if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check amount of data in fifo registers... */ - - ufstat = rd_regl(port, S3C2410_UFSTAT); - return (ufstat & info->tx_fifofull) ? 0 : 1; - } - - /* in non-fifo mode, we go and use the tx buffer empty */ - - utrstat = rd_regl(port, S3C2410_UTRSTAT); - return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; -} - -static void -s3c24xx_serial_console_putchar(struct uart_port *port, int ch) -{ - unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); - while (!s3c24xx_serial_console_txrdy(port, ufcon)) - barrier(); - wr_regb(cons_uart, S3C2410_UTXH, ch); -} - -static void -s3c24xx_serial_console_write(struct console *co, const char *s, - unsigned int count) -{ - uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); -} - -static void __init -s3c24xx_serial_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - struct s3c24xx_uart_clksrc clksrc; - struct clk *clk; - unsigned int ulcon; - unsigned int ucon; - unsigned int ubrdiv; - unsigned long rate; - - ulcon = rd_regl(port, S3C2410_ULCON); - ucon = rd_regl(port, S3C2410_UCON); - ubrdiv = rd_regl(port, S3C2410_UBRDIV); - - dbg("s3c24xx_serial_get_options: port=%p\n" - "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", - port, ulcon, ucon, ubrdiv); - - if ((ucon & 0xf) != 0) { - /* consider the serial port configured if the tx/rx mode set */ - - switch (ulcon & S3C2410_LCON_CSMASK) { - case S3C2410_LCON_CS5: - *bits = 5; - break; - case S3C2410_LCON_CS6: - *bits = 6; - break; - case S3C2410_LCON_CS7: - *bits = 7; - break; - default: - case S3C2410_LCON_CS8: - *bits = 8; - break; - } - - switch (ulcon & S3C2410_LCON_PMASK) { - case S3C2410_LCON_PEVEN: - *parity = 'e'; - break; - - case S3C2410_LCON_PODD: - *parity = 'o'; - break; - - case S3C2410_LCON_PNONE: - default: - *parity = 'n'; - } - - /* now calculate the baud rate */ - - s3c24xx_serial_getsource(port, &clksrc); - - clk = clk_get(port->dev, clksrc.name); - if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; - else - rate = 1; - - - *baud = rate / (16 * (ubrdiv + 1)); - dbg("calculated baud %d\n", *baud); - } - -} - -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - -static int __init -s3c24xx_serial_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", - co, co->index, options); - - /* is this a valid port */ - - if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) - co->index = 0; - - port = &s3c24xx_serial_ports[co->index].port; - - /* is the port configured? */ - - if (port->mapbase == 0x0) { - co->index = 0; - port = &s3c24xx_serial_ports[co->index].port; - } - - cons_uart = port; - - dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - s3c24xx_serial_get_options(port, &baud, &parity, &bits); - - dbg("s3c24xx_serial_console_setup: baud %d\n", baud); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - -static struct console s3c24xx_serial_console = { - .name = S3C24XX_SERIAL_NAME, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .write = s3c24xx_serial_console_write, - .setup = s3c24xx_serial_console_setup -}; - -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) - -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; - - dbg("s3c24xx_serial_initconsole\n"); - - /* select driver based on the cpu */ - - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } - - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; - - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); - - register_console(&s3c24xx_serial_console); - return 0; -} - -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ - -MODULE_DESCRIPTION("Samsung SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h deleted file mode 100644 index 0ac06a0..0000000 --- a/drivers/serial/samsung.h +++ /dev/null @@ -1,120 +0,0 @@ -/* linux/drivers/serial/samsung.h - * - * Driver for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct s3c24xx_uart_info { - char *name; - unsigned int type; - unsigned int fifosize; - unsigned long rx_fifomask; - unsigned long rx_fifoshift; - unsigned long rx_fifofull; - unsigned long tx_fifomask; - unsigned long tx_fifoshift; - unsigned long tx_fifofull; - - /* uart port features */ - - unsigned int has_divslot:1; - - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - - /* uart controls */ - int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); -}; - -struct s3c24xx_uart_port { - unsigned char rx_claimed; - unsigned char tx_claimed; - unsigned int pm_level; - unsigned long baudclk_rate; - - unsigned int rx_irq; - unsigned int tx_irq; - - struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; - struct clk *clk; - struct clk *baudclk; - struct uart_port port; - -#ifdef CONFIG_CPU_FREQ - struct notifier_block freq_transition; -#endif -}; - -/* conversion functions */ - -#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) - -/* register access controls */ - -#define portaddr(port, reg) ((port)->membase + (reg)) - -#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) -#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) - -#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) -#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) - -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -#define s3c24xx_console_init(__drv, __inf) \ -static int __init s3c_serial_console_init(void) \ -{ \ - struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ - int i; \ - \ - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ - uinfo[i] = __inf; \ - return s3c24xx_serial_initconsole(__drv, uinfo); \ -} \ - \ -console_initcall(s3c_serial_console_init) - -#else -#define s3c24xx_console_init(drv, inf) extern void no_console(void) -#endif - -#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG - -extern void printascii(const char *); - -static void dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -#else -#define dbg(x...) do { } while (0) -#endif diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c deleted file mode 100644 index a2f2b32..0000000 --- a/drivers/serial/sb1250-duart.c +++ /dev/null @@ -1,976 +0,0 @@ -/* - * drivers/serial/sb1250-duart.c - * - * Support for the asynchronous serial interface (DUART) included - * in the BCM1250 and derived System-On-a-Chip (SOC) devices. - * - * Copyright (c) 2007 Maciej W. Rozycki - * - * Derived from drivers/char/sb1250_duart.c for which the following - * copyright applies: - * - * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * References: - * - * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation - */ - -#if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - - -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) -#include -#include - -#define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) -#define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) -#define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) - -#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING - -#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) -#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) -#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) - -#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) -#include -#include - -#define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) -#define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) -#define SBD_INT(line) (K_INT_UART_0 + (line)) - -#else -#error invalid SB1250 UART configuration - -#endif - - -MODULE_AUTHOR("Maciej W. Rozycki "); -MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); -MODULE_LICENSE("GPL"); - - -#define DUART_MAX_CHIP 2 -#define DUART_MAX_SIDE 2 - -/* - * Per-port state. - */ -struct sbd_port { - struct sbd_duart *duart; - struct uart_port port; - unsigned char __iomem *memctrl; - int tx_stopped; - int initialised; -}; - -/* - * Per-DUART state for the shared register space. - */ -struct sbd_duart { - struct sbd_port sport[2]; - unsigned long mapctrl; - atomic_t map_guard; -}; - -#define to_sport(uport) container_of(uport, struct sbd_port, port) - -static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; - - -/* - * Reading and writing SB1250 DUART registers. - * - * There are three register spaces: two per-channel ones and - * a shared one. We have to define accessors appropriately. - * All registers are 64-bit and all but the Baud Rate Clock - * registers only define 8 least significant bits. There is - * also a workaround to take into account. Raw accessors use - * the full register width, but cooked ones truncate it - * intentionally so that the rest of the driver does not care. - */ -static u64 __read_sbdchn(struct sbd_port *sport, int reg) -{ - void __iomem *csr = sport->port.membase + reg; - - return __raw_readq(csr); -} - -static u64 __read_sbdshr(struct sbd_port *sport, int reg) -{ - void __iomem *csr = sport->memctrl + reg; - - return __raw_readq(csr); -} - -static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) -{ - void __iomem *csr = sport->port.membase + reg; - - __raw_writeq(value, csr); -} - -static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) -{ - void __iomem *csr = sport->memctrl + reg; - - __raw_writeq(value, csr); -} - -/* - * In bug 1956, we get glitches that can mess up uart registers. This - * "read-mode-reg after any register access" is an accepted workaround. - */ -static void __war_sbd1956(struct sbd_port *sport) -{ - __read_sbdchn(sport, R_DUART_MODE_REG_1); - __read_sbdchn(sport, R_DUART_MODE_REG_2); -} - -static unsigned char read_sbdchn(struct sbd_port *sport, int reg) -{ - unsigned char retval; - - retval = __read_sbdchn(sport, reg); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); - return retval; -} - -static unsigned char read_sbdshr(struct sbd_port *sport, int reg) -{ - unsigned char retval; - - retval = __read_sbdshr(sport, reg); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); - return retval; -} - -static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) -{ - __write_sbdchn(sport, reg, value); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); -} - -static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) -{ - __write_sbdshr(sport, reg, value); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); -} - - -static int sbd_receive_ready(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; -} - -static int sbd_receive_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (sbd_receive_ready(sport) && --loops) - read_sbdchn(sport, R_DUART_RX_HOLD); - return loops; -} - -static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; -} - -static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (!sbd_transmit_ready(sport) && --loops) - udelay(2); - return loops; -} - -static int sbd_transmit_empty(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; -} - -static int sbd_line_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (!sbd_transmit_empty(sport) && --loops) - udelay(2); - return loops; -} - - -static unsigned int sbd_tx_empty(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; -} - -static unsigned int sbd_get_mctrl(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mctrl, status; - - status = read_sbdshr(sport, R_DUART_IN_PORT); - status >>= (uport->line) % 2; - mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | - (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | - (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | - (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); - return mctrl; -} - -static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int clr = 0, set = 0, mode2; - - if (mctrl & TIOCM_DTR) - set |= M_DUART_SET_OPR2; - else - clr |= M_DUART_CLR_OPR2; - if (mctrl & TIOCM_RTS) - set |= M_DUART_SET_OPR0; - else - clr |= M_DUART_CLR_OPR0; - clr <<= (uport->line) % 2; - set <<= (uport->line) % 2; - - mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); - mode2 &= ~M_DUART_CHAN_MODE; - if (mctrl & TIOCM_LOOP) - mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; - else - mode2 |= V_DUART_CHAN_MODE_NORMAL; - - write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); - write_sbdshr(sport, R_DUART_SET_OPR, set); - write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); -} - -static void sbd_stop_tx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); - sport->tx_stopped = 1; -}; - -static void sbd_start_tx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mask; - - /* Enable tx interrupts. */ - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - mask |= M_DUART_IMR_TX; - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - - /* Go!, go!, go!... */ - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); - sport->tx_stopped = 0; -}; - -static void sbd_stop_rx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); -}; - -static void sbd_enable_ms(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_AUXCTL_X, - M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); -} - -static void sbd_break_ctl(struct uart_port *uport, int break_state) -{ - struct sbd_port *sport = to_sport(uport); - - if (break_state == -1) - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); - else - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); -} - - -static void sbd_receive_chars(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - struct uart_icount *icount; - unsigned int status, ch, flag; - int count; - - for (count = 16; count; count--) { - status = read_sbdchn(sport, R_DUART_STATUS); - if (!(status & M_DUART_RX_RDY)) - break; - - ch = read_sbdchn(sport, R_DUART_RX_HOLD); - - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - if (unlikely(status & - (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | - M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { - if (status & M_DUART_RCVD_BRK) { - icount->brk++; - if (uart_handle_break(uport)) - continue; - } else if (status & M_DUART_FRM_ERR) - icount->frame++; - else if (status & M_DUART_PARITY_ERR) - icount->parity++; - if (status & M_DUART_OVRUN_ERR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & M_DUART_RCVD_BRK) - flag = TTY_BREAK; - else if (status & M_DUART_FRM_ERR) - flag = TTY_FRAME; - else if (status & M_DUART_PARITY_ERR) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); - } - - tty_flip_buffer_push(uport->state->port.tty); -} - -static void sbd_transmit_chars(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - struct circ_buf *xmit = &sport->port.state->xmit; - unsigned int mask; - int stop_tx; - - /* XON/XOFF chars. */ - if (sport->port.x_char) { - write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* If nothing to do or stopped or hardware stopped. */ - stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); - - /* Send char. */ - if (!stop_tx) { - write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - } - - /* Are we are done? */ - if (stop_tx || uart_circ_empty(xmit)) { - /* Disable tx interrupts. */ - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - mask &= ~M_DUART_IMR_TX; - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - } -} - -static void sbd_status_handle(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - unsigned int delta; - - delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); - delta >>= (uport->line) % 2; - - if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) - uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); - - if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) - uport->icount.dsr++; - - if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << - S_DUART_IN_PIN_CHNG)) - wake_up_interruptible(&uport->state->port.delta_msr_wait); -} - -static irqreturn_t sbd_interrupt(int irq, void *dev_id) -{ - struct sbd_port *sport = dev_id; - struct uart_port *uport = &sport->port; - irqreturn_t status = IRQ_NONE; - unsigned int intstat; - int count; - - for (count = 16; count; count--) { - intstat = read_sbdshr(sport, - R_DUART_ISRREG((uport->line) % 2)); - intstat &= read_sbdshr(sport, - R_DUART_IMRREG((uport->line) % 2)); - intstat &= M_DUART_ISR_ALL; - if (!intstat) - break; - - if (intstat & M_DUART_ISR_RX) - sbd_receive_chars(sport); - if (intstat & M_DUART_ISR_IN) - sbd_status_handle(sport); - if (intstat & M_DUART_ISR_TX) - sbd_transmit_chars(sport); - - status = IRQ_HANDLED; - } - - return status; -} - - -static int sbd_startup(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mode1; - int ret; - - ret = request_irq(sport->port.irq, sbd_interrupt, - IRQF_SHARED, "sb1250-duart", sport); - if (ret) - return ret; - - /* Clear the receive FIFO. */ - sbd_receive_drain(sport); - - /* Clear the interrupt registers. */ - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); - read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); - - /* Set rx/tx interrupt to FIFO available. */ - mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); - mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); - write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); - - /* Disable tx, enable rx. */ - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); - sport->tx_stopped = 1; - - /* Enable interrupts. */ - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), - M_DUART_IMR_IN | M_DUART_IMR_RX); - - return 0; -} - -static void sbd_shutdown(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); - sport->tx_stopped = 1; - free_irq(sport->port.irq, sport); -} - - -static void sbd_init_port(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - - if (sport->initialised) - return; - - /* There is no DUART reset feature, so just set some sane defaults. */ - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); - write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); - write_sbdchn(sport, R_DUART_MODE_REG_2, 0); - write_sbdchn(sport, R_DUART_FULL_CTL, - V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); - write_sbdchn(sport, R_DUART_OPCR_X, 0); - write_sbdchn(sport, R_DUART_AUXCTL_X, 0); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); - - sport->initialised = 1; -} - -static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mode1 = 0, mode2 = 0, aux = 0; - unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; - unsigned int oldmode1, oldmode2, oldaux; - unsigned int baud, brg; - unsigned int command; - - mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | - M_DUART_BITS_PER_CHAR); - mode2mask |= ~M_DUART_STOP_BIT_LEN_2; - auxmask |= ~M_DUART_CTS_CHNG_ENA; - - /* Byte size. */ - switch (termios->c_cflag & CSIZE) { - case CS5: - case CS6: - /* Unsupported, leave unchanged. */ - mode1mask |= M_DUART_PARITY_MODE; - break; - case CS7: - mode1 |= V_DUART_BITS_PER_CHAR_7; - break; - case CS8: - default: - mode1 |= V_DUART_BITS_PER_CHAR_8; - break; - } - - /* Parity and stop bits. */ - if (termios->c_cflag & CSTOPB) - mode2 |= M_DUART_STOP_BIT_LEN_2; - else - mode2 |= M_DUART_STOP_BIT_LEN_1; - if (termios->c_cflag & PARENB) - mode1 |= V_DUART_PARITY_MODE_ADD; - else - mode1 |= V_DUART_PARITY_MODE_NONE; - if (termios->c_cflag & PARODD) - mode1 |= M_DUART_PARITY_TYPE_ODD; - else - mode1 |= M_DUART_PARITY_TYPE_EVEN; - - baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); - brg = V_DUART_BAUD_RATE(baud); - /* The actual lower bound is 1221bps, so compensate. */ - if (brg > M_DUART_CLK_COUNTER) - brg = M_DUART_CLK_COUNTER; - - uart_update_timeout(uport, termios->c_cflag, baud); - - uport->read_status_mask = M_DUART_OVRUN_ERR; - if (termios->c_iflag & INPCK) - uport->read_status_mask |= M_DUART_FRM_ERR | - M_DUART_PARITY_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - uport->read_status_mask |= M_DUART_RCVD_BRK; - - uport->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= M_DUART_FRM_ERR | - M_DUART_PARITY_ERR; - if (termios->c_iflag & IGNBRK) { - uport->ignore_status_mask |= M_DUART_RCVD_BRK; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= M_DUART_OVRUN_ERR; - } - - if (termios->c_cflag & CREAD) - command = M_DUART_RX_EN; - else - command = M_DUART_RX_DIS; - - if (termios->c_cflag & CRTSCTS) - aux |= M_DUART_CTS_CHNG_ENA; - else - aux &= ~M_DUART_CTS_CHNG_ENA; - - spin_lock(&uport->lock); - - if (sport->tx_stopped) - command |= M_DUART_TX_DIS; - else - command |= M_DUART_TX_EN; - - oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; - oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; - oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; - - if (!sport->tx_stopped) - sbd_line_drain(sport); - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); - - write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); - write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); - write_sbdchn(sport, R_DUART_CLK_SEL, brg); - write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); - - write_sbdchn(sport, R_DUART_CMD, command); - - spin_unlock(&uport->lock); -} - - -static const char *sbd_type(struct uart_port *uport) -{ - return "SB1250 DUART"; -} - -static void sbd_release_port(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - struct sbd_duart *duart = sport->duart; - int map_guard; - - iounmap(sport->memctrl); - sport->memctrl = NULL; - iounmap(uport->membase); - uport->membase = NULL; - - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) - release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); - release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); -} - -static int sbd_map_port(struct uart_port *uport) -{ - const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; - struct sbd_port *sport = to_sport(uport); - struct sbd_duart *duart = sport->duart; - - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - DUART_CHANREG_SPACING); - if (!uport->membase) { - printk(err); - return -ENOMEM; - } - - if (!sport->memctrl) - sport->memctrl = ioremap_nocache(duart->mapctrl, - DUART_CHANREG_SPACING); - if (!sport->memctrl) { - printk(err); - iounmap(uport->membase); - uport->membase = NULL; - return -ENOMEM; - } - - return 0; -} - -static int sbd_request_port(struct uart_port *uport) -{ - const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; - struct sbd_duart *duart = to_sport(uport)->duart; - int map_guard; - int ret = 0; - - if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, - "sb1250-duart")) { - printk(err); - return -EBUSY; - } - map_guard = atomic_add_return(1, &duart->map_guard); - if (map_guard == 1) { - if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, - "sb1250-duart")) { - atomic_add(-1, &duart->map_guard); - printk(err); - ret = -EBUSY; - } - } - if (!ret) { - ret = sbd_map_port(uport); - if (ret) { - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) - release_mem_region(duart->mapctrl, - DUART_CHANREG_SPACING); - } - } - if (ret) { - release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); - return ret; - } - return 0; -} - -static void sbd_config_port(struct uart_port *uport, int flags) -{ - struct sbd_port *sport = to_sport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (sbd_request_port(uport)) - return; - - uport->type = PORT_SB1250_DUART; - - sbd_init_port(sport); - } -} - -static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - if (ser->baud_base != uport->uartclk / 16) - ret = -EINVAL; - return ret; -} - - -static const struct uart_ops sbd_ops = { - .tx_empty = sbd_tx_empty, - .set_mctrl = sbd_set_mctrl, - .get_mctrl = sbd_get_mctrl, - .stop_tx = sbd_stop_tx, - .start_tx = sbd_start_tx, - .stop_rx = sbd_stop_rx, - .enable_ms = sbd_enable_ms, - .break_ctl = sbd_break_ctl, - .startup = sbd_startup, - .shutdown = sbd_shutdown, - .set_termios = sbd_set_termios, - .type = sbd_type, - .release_port = sbd_release_port, - .request_port = sbd_request_port, - .config_port = sbd_config_port, - .verify_port = sbd_verify_port, -}; - -/* Initialize SB1250 DUART port structures. */ -static void __init sbd_probe_duarts(void) -{ - static int probed; - int chip, side; - int max_lines, line; - - if (probed) - return; - - /* Set the number of available units based on the SOC type. */ - switch (soc_type) { - case K_SYS_SOC_TYPE_BCM1x55: - case K_SYS_SOC_TYPE_BCM1x80: - max_lines = 4; - break; - default: - /* Assume at least two serial ports at the normal address. */ - max_lines = 2; - break; - } - - probed = 1; - - for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; - chip++) { - sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); - - for (side = 0; side < DUART_MAX_SIDE && line < max_lines; - side++, line++) { - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - - sport->duart = &sbd_duarts[chip]; - - uport->irq = SBD_INT(line); - uport->uartclk = 100000000 / 20 * 16; - uport->fifosize = 16; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &sbd_ops; - uport->line = line; - uport->mapbase = SBD_CHANREGS(line); - } - } -} - - -#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE -/* - * Serial console stuff. Very basic, polling driver for doing serial - * console output. The console_sem is held by the caller, so we - * shouldn't be interrupted for more console activity. - */ -static void sbd_console_putchar(struct uart_port *uport, int ch) -{ - struct sbd_port *sport = to_sport(uport); - - sbd_transmit_drain(sport); - write_sbdchn(sport, R_DUART_TX_HOLD, ch); -} - -static void sbd_console_write(struct console *co, const char *s, - unsigned int count) -{ - int chip = co->index / DUART_MAX_SIDE; - int side = co->index % DUART_MAX_SIDE; - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - unsigned long flags; - unsigned int mask; - - /* Disable transmit interrupts and enable the transmitter. */ - spin_lock_irqsave(&uport->lock, flags); - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), - mask & ~M_DUART_IMR_TX); - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); - spin_unlock_irqrestore(&uport->lock, flags); - - uart_console_write(&sport->port, s, count, sbd_console_putchar); - - /* Restore transmit interrupts and the transmitter enable. */ - spin_lock_irqsave(&uport->lock, flags); - sbd_line_drain(sport); - if (sport->tx_stopped) - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - spin_unlock_irqrestore(&uport->lock, flags); -} - -static int __init sbd_console_setup(struct console *co, char *options) -{ - int chip = co->index / DUART_MAX_SIDE; - int side = co->index % DUART_MAX_SIDE; - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - if (!sport->duart) - return -ENXIO; - - ret = sbd_map_port(uport); - if (ret) - return ret; - - sbd_init_port(sport); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(uport, co, baud, parity, bits, flow); -} - -static struct uart_driver sbd_reg; -static struct console sbd_console = { - .name = "duart", - .write = sbd_console_write, - .device = uart_console_device, - .setup = sbd_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sbd_reg -}; - -static int __init sbd_serial_console_init(void) -{ - sbd_probe_duarts(); - register_console(&sbd_console); - - return 0; -} - -console_initcall(sbd_serial_console_init); - -#define SERIAL_SB1250_DUART_CONSOLE &sbd_console -#else -#define SERIAL_SB1250_DUART_CONSOLE NULL -#endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ - - -static struct uart_driver sbd_reg = { - .owner = THIS_MODULE, - .driver_name = "sb1250_duart", - .dev_name = "duart", - .major = TTY_MAJOR, - .minor = SB1250_DUART_MINOR_BASE, - .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, - .cons = SERIAL_SB1250_DUART_CONSOLE, -}; - -/* Set up the driver and register it. */ -static int __init sbd_init(void) -{ - int i, ret; - - sbd_probe_duarts(); - - ret = uart_register_driver(&sbd_reg); - if (ret) - return ret; - - for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { - struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; - struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; - struct uart_port *uport = &sport->port; - - if (sport->duart) - uart_add_one_port(&sbd_reg, uport); - } - - return 0; -} - -/* Unload the driver. Unregister stuff, get ready to go away. */ -static void __exit sbd_exit(void) -{ - int i; - - for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { - struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; - struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; - struct uart_port *uport = &sport->port; - - if (sport->duart) - uart_remove_one_port(&sbd_reg, uport); - } - - uart_unregister_driver(&sbd_reg); -} - -module_init(sbd_init); -module_exit(sbd_exit); diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c deleted file mode 100644 index 75038ad..0000000 --- a/drivers/serial/sc26xx.c +++ /dev/null @@ -1,757 +0,0 @@ -/* - * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices. - * - * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#define SC26XX_MAJOR 204 -#define SC26XX_MINOR_START 205 -#define SC26XX_NR 2 - -struct uart_sc26xx_port { - struct uart_port port[2]; - u8 dsr_mask[2]; - u8 cts_mask[2]; - u8 dcd_mask[2]; - u8 ri_mask[2]; - u8 dtr_mask[2]; - u8 rts_mask[2]; - u8 imr; -}; - -/* register common to both ports */ -#define RD_ISR 0x14 -#define RD_IPR 0x34 - -#define WR_ACR 0x10 -#define WR_IMR 0x14 -#define WR_OPCR 0x34 -#define WR_OPR_SET 0x38 -#define WR_OPR_CLR 0x3C - -/* access common register */ -#define READ_SC(p, r) readb((p)->membase + RD_##r) -#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r) - -/* register per port */ -#define RD_PORT_MRx 0x00 -#define RD_PORT_SR 0x04 -#define RD_PORT_RHR 0x0c - -#define WR_PORT_MRx 0x00 -#define WR_PORT_CSR 0x04 -#define WR_PORT_CR 0x08 -#define WR_PORT_THR 0x0c - -/* SR bits */ -#define SR_BREAK (1 << 7) -#define SR_FRAME (1 << 6) -#define SR_PARITY (1 << 5) -#define SR_OVERRUN (1 << 4) -#define SR_TXRDY (1 << 2) -#define SR_RXRDY (1 << 0) - -#define CR_RES_MR (1 << 4) -#define CR_RES_RX (2 << 4) -#define CR_RES_TX (3 << 4) -#define CR_STRT_BRK (6 << 4) -#define CR_STOP_BRK (7 << 4) -#define CR_DIS_TX (1 << 3) -#define CR_ENA_TX (1 << 2) -#define CR_DIS_RX (1 << 1) -#define CR_ENA_RX (1 << 0) - -/* ISR bits */ -#define ISR_RXRDYB (1 << 5) -#define ISR_TXRDYB (1 << 4) -#define ISR_RXRDYA (1 << 1) -#define ISR_TXRDYA (1 << 0) - -/* IMR bits */ -#define IMR_RXRDY (1 << 1) -#define IMR_TXRDY (1 << 0) - -/* access port register */ -static inline u8 read_sc_port(struct uart_port *p, u8 reg) -{ - return readb(p->membase + p->line * 0x20 + reg); -} - -static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val) -{ - writeb(val, p->membase + p->line * 0x20 + reg); -} - -#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r) -#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v) - -static void sc26xx_enable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr |= mask << (line * 4); - WRITE_SC(port, IMR, up->imr); -} - -static void sc26xx_disable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr &= ~(mask << (line * 4)); - WRITE_SC(port, IMR, up->imr); -} - -static struct tty_struct *receive_chars(struct uart_port *port) -{ - struct tty_struct *tty = NULL; - int limit = 10000; - unsigned char ch; - char flag; - u8 status; - - if (port->state != NULL) /* Unopened serial console */ - tty = port->state->port.tty; - - while (limit-- > 0) { - status = READ_SC_PORT(port, SR); - if (!(status & SR_RXRDY)) - break; - ch = READ_SC_PORT(port, RHR); - - flag = TTY_NORMAL; - port->icount.rx++; - - if (unlikely(status & (SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN))) { - if (status & SR_BREAK) { - status &= ~(SR_PARITY | SR_FRAME); - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & SR_PARITY) - port->icount.parity++; - else if (status & SR_FRAME) - port->icount.frame++; - if (status & SR_OVERRUN) - port->icount.overrun++; - - status &= port->read_status_mask; - if (status & SR_BREAK) - flag = TTY_BREAK; - else if (status & SR_PARITY) - flag = TTY_PARITY; - else if (status & SR_FRAME) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - - if (status & port->ignore_status_mask) - continue; - - tty_insert_flip_char(tty, ch, flag); - } - return tty; -} - -static void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - - if (!port->state) - return; - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - sc26xx_disable_irq(port, IMR_TXRDY); - return; - } - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) - break; - - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t sc26xx_interrupt(int irq, void *dev_id) -{ - struct uart_sc26xx_port *up = dev_id; - struct tty_struct *tty; - unsigned long flags; - u8 isr; - - spin_lock_irqsave(&up->port[0].lock, flags); - - tty = NULL; - isr = READ_SC(&up->port[0], ISR); - if (isr & ISR_TXRDYA) - transmit_chars(&up->port[0]); - if (isr & ISR_RXRDYA) - tty = receive_chars(&up->port[0]); - - spin_unlock(&up->port[0].lock); - - if (tty) - tty_flip_buffer_push(tty); - - spin_lock(&up->port[1].lock); - - tty = NULL; - if (isr & ISR_TXRDYB) - transmit_chars(&up->port[1]); - if (isr & ISR_RXRDYB) - tty = receive_chars(&up->port[1]); - - spin_unlock_irqrestore(&up->port[1].lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sc26xx_tx_empty(struct uart_port *port) -{ - return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0; -} - -/* port->lock held by caller. */ -static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - if (up->dtr_mask[line]) { - if (mctrl & TIOCM_DTR) - WRITE_SC(port, OPR_SET, up->dtr_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->dtr_mask[line]); - } - if (up->rts_mask[line]) { - if (mctrl & TIOCM_RTS) - WRITE_SC(port, OPR_SET, up->rts_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->rts_mask[line]); - } -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sc26xx_get_mctrl(struct uart_port *port) -{ - struct uart_sc26xx_port *up; - int line = port->line; - unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; - u8 ipr; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - ipr = READ_SC(port, IPR) ^ 0xff; - - if (up->dsr_mask[line]) { - mctrl &= ~TIOCM_DSR; - mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0; - } - if (up->cts_mask[line]) { - mctrl &= ~TIOCM_CTS; - mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0; - } - if (up->dcd_mask[line]) { - mctrl &= ~TIOCM_CAR; - mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0; - } - if (up->ri_mask[line]) { - mctrl &= ~TIOCM_RNG; - mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0; - } - return mctrl; -} - -/* port->lock held by caller. */ -static void sc26xx_stop_tx(struct uart_port *port) -{ - return; -} - -/* port->lock held by caller. */ -static void sc26xx_start_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) { - sc26xx_enable_irq(port, IMR_TXRDY); - break; - } - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } -} - -/* port->lock held by caller. */ -static void sc26xx_stop_rx(struct uart_port *port) -{ -} - -/* port->lock held by caller. */ -static void sc26xx_enable_ms(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sc26xx_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state == -1) - WRITE_SC_PORT(port, CR, CR_STRT_BRK); - else - WRITE_SC_PORT(port, CR, CR_STOP_BRK); -} - -/* port->lock is not held. */ -static int sc26xx_startup(struct uart_port *port) -{ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - WRITE_SC(port, OPCR, 0); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - /* start rx/tx */ - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - - /* enable irqs */ - sc26xx_enable_irq(port, IMR_RXRDY); - return 0; -} - -/* port->lock is not held. */ -static void sc26xx_shutdown(struct uart_port *port) -{ - /* disable interrupst */ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - - /* stop tx/rx */ - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); -} - -/* port->lock is not held. */ -static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - unsigned int iflag, cflag; - unsigned long flags; - u8 mr1, mr2, csr; - - spin_lock_irqsave(&port->lock, flags); - - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); - - iflag = termios->c_iflag; - cflag = termios->c_cflag; - - port->read_status_mask = SR_OVERRUN; - if (iflag & INPCK) - port->read_status_mask |= SR_PARITY | SR_FRAME; - if (iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SR_BREAK; - - port->ignore_status_mask = 0; - if (iflag & IGNBRK) - port->ignore_status_mask |= SR_BREAK; - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN; - - switch (cflag & CSIZE) { - case CS5: - mr1 = 0x00; - break; - case CS6: - mr1 = 0x01; - break; - case CS7: - mr1 = 0x02; - break; - default: - case CS8: - mr1 = 0x03; - break; - } - mr2 = 0x07; - if (cflag & CSTOPB) - mr2 = 0x0f; - if (cflag & PARENB) { - if (cflag & PARODD) - mr1 |= (1 << 2); - } else - mr1 |= (2 << 3); - - switch (baud) { - case 50: - csr = 0x00; - break; - case 110: - csr = 0x11; - break; - case 134: - csr = 0x22; - break; - case 200: - csr = 0x33; - break; - case 300: - csr = 0x44; - break; - case 600: - csr = 0x55; - break; - case 1200: - csr = 0x66; - break; - case 2400: - csr = 0x88; - break; - case 4800: - csr = 0x99; - break; - default: - case 9600: - csr = 0xbb; - break; - case 19200: - csr = 0xcc; - break; - } - - WRITE_SC_PORT(port, CR, CR_RES_MR); - WRITE_SC_PORT(port, MRx, mr1); - WRITE_SC_PORT(port, MRx, mr2); - - WRITE_SC(port, ACR, 0x80); - WRITE_SC_PORT(port, CSR, csr); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - /* XXX */ - uart_update_timeout(port, cflag, - (port->uartclk / (16 * quot))); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *sc26xx_type(struct uart_port *port) -{ - return "SC26XX"; -} - -static void sc26xx_release_port(struct uart_port *port) -{ -} - -static int sc26xx_request_port(struct uart_port *port) -{ - return 0; -} - -static void sc26xx_config_port(struct uart_port *port, int flags) -{ -} - -static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sc26xx_ops = { - .tx_empty = sc26xx_tx_empty, - .set_mctrl = sc26xx_set_mctrl, - .get_mctrl = sc26xx_get_mctrl, - .stop_tx = sc26xx_stop_tx, - .start_tx = sc26xx_start_tx, - .stop_rx = sc26xx_stop_rx, - .enable_ms = sc26xx_enable_ms, - .break_ctl = sc26xx_break_ctl, - .startup = sc26xx_startup, - .shutdown = sc26xx_shutdown, - .set_termios = sc26xx_set_termios, - .type = sc26xx_type, - .release_port = sc26xx_release_port, - .request_port = sc26xx_request_port, - .config_port = sc26xx_config_port, - .verify_port = sc26xx_verify_port, -}; - -static struct uart_port *sc26xx_port; - -#ifdef CONFIG_SERIAL_SC26XX_CONSOLE -static void sc26xx_console_putchar(struct uart_port *port, char c) -{ - unsigned long flags; - int limit = 1000000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - if (READ_SC_PORT(port, SR) & SR_TXRDY) { - WRITE_SC_PORT(port, THR, c); - break; - } - udelay(2); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void sc26xx_console_write(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sc26xx_port; - int i; - - for (i = 0; i < n; i++) { - if (*s == '\n') - sc26xx_console_putchar(port, '\r'); - sc26xx_console_putchar(port, *s++); - } -} - -static int __init sc26xx_console_setup(struct console *con, char *options) -{ - struct uart_port *port = sc26xx_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (port->type != PORT_SC26XX) - return -1; - - printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, con, baud, parity, bits, flow); -} - -static struct uart_driver sc26xx_reg; -static struct console sc26xx_console = { - .name = "ttySC", - .write = sc26xx_console_write, - .device = uart_console_device, - .setup = sc26xx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sc26xx_reg, -}; -#define SC26XX_CONSOLE &sc26xx_console -#else -#define SC26XX_CONSOLE NULL -#endif - -static struct uart_driver sc26xx_reg = { - .owner = THIS_MODULE, - .driver_name = "SC26xx", - .dev_name = "ttySC", - .major = SC26XX_MAJOR, - .minor = SC26XX_MINOR_START, - .nr = SC26XX_NR, - .cons = SC26XX_CONSOLE, -}; - -static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) -{ - unsigned int bit = (flags >> bitpos) & 15; - - return bit ? (1 << (bit - 1)) : 0; -} - -static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, - int line, unsigned int data) -{ - up->dtr_mask[line] = sc26xx_flags2mask(data, 0); - up->rts_mask[line] = sc26xx_flags2mask(data, 4); - up->dsr_mask[line] = sc26xx_flags2mask(data, 8); - up->cts_mask[line] = sc26xx_flags2mask(data, 12); - up->dcd_mask[line] = sc26xx_flags2mask(data, 16); - up->ri_mask[line] = sc26xx_flags2mask(data, 20); -} - -static int __devinit sc26xx_probe(struct platform_device *dev) -{ - struct resource *res; - struct uart_sc26xx_port *up; - unsigned int *sc26xx_data = dev->dev.platform_data; - int err; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - up = kzalloc(sizeof *up, GFP_KERNEL); - if (unlikely(!up)) - return -ENOMEM; - - up->port[0].line = 0; - up->port[0].ops = &sc26xx_ops; - up->port[0].type = PORT_SC26XX; - up->port[0].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[0].mapbase = res->start; - up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40); - up->port[0].iotype = UPIO_MEM; - up->port[0].irq = platform_get_irq(dev, 0); - - up->port[0].dev = &dev->dev; - - sc26xx_init_masks(up, 0, sc26xx_data[0]); - - sc26xx_port = &up->port[0]; - - up->port[1].line = 1; - up->port[1].ops = &sc26xx_ops; - up->port[1].type = PORT_SC26XX; - up->port[1].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[1].mapbase = up->port[0].mapbase; - up->port[1].membase = up->port[0].membase; - up->port[1].iotype = UPIO_MEM; - up->port[1].irq = up->port[0].irq; - - up->port[1].dev = &dev->dev; - - sc26xx_init_masks(up, 1, sc26xx_data[1]); - - err = uart_register_driver(&sc26xx_reg); - if (err) - goto out_free_port; - - sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor; - - err = uart_add_one_port(&sc26xx_reg, &up->port[0]); - if (err) - goto out_unregister_driver; - - err = uart_add_one_port(&sc26xx_reg, &up->port[1]); - if (err) - goto out_remove_port0; - - err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up); - if (err) - goto out_remove_ports; - - dev_set_drvdata(&dev->dev, up); - return 0; - -out_remove_ports: - uart_remove_one_port(&sc26xx_reg, &up->port[1]); -out_remove_port0: - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - -out_unregister_driver: - uart_unregister_driver(&sc26xx_reg); - -out_free_port: - kfree(up); - sc26xx_port = NULL; - return err; -} - - -static int __exit sc26xx_driver_remove(struct platform_device *dev) -{ - struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev); - - free_irq(up->port[0].irq, up); - - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - uart_remove_one_port(&sc26xx_reg, &up->port[1]); - - uart_unregister_driver(&sc26xx_reg); - - kfree(up); - sc26xx_port = NULL; - - dev_set_drvdata(&dev->dev, NULL); - return 0; -} - -static struct platform_driver sc26xx_driver = { - .probe = sc26xx_probe, - .remove = __devexit_p(sc26xx_driver_remove), - .driver = { - .name = "SC26xx", - .owner = THIS_MODULE, - }, -}; - -static int __init sc26xx_init(void) -{ - return platform_driver_register(&sc26xx_driver); -} - -static void __exit sc26xx_exit(void) -{ - platform_driver_unregister(&sc26xx_driver); -} - -module_init(sc26xx_init); -module_exit(sc26xx_exit); - - -MODULE_AUTHOR("Thomas Bogendörfer"); -MODULE_DESCRIPTION("SC681/SC2692 serial driver"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c deleted file mode 100644 index 460a72d..0000000 --- a/drivers/serial/serial_core.c +++ /dev/null @@ -1,2578 +0,0 @@ -/* - * linux/drivers/char/core.c - * - * Driver core for serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for serial_state and serial_icounter_struct */ -#include -#include -#include - -#include -#include - -/* - * This is used to lock changes in serial line configuration. - */ -static DEFINE_MUTEX(port_mutex); - -/* - * lockdep: port->lock is initialized in two places, but we - * want only one lock-class: - */ -static struct lock_class_key port_lock_key; - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) - -#ifdef CONFIG_SERIAL_CORE_CONSOLE -#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) -#else -#define uart_console(port) (0) -#endif - -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios); -static void __uart_wait_until_sent(struct uart_port *port, int timeout); -static void uart_change_pm(struct uart_state *state, int pm_state); - -/* - * This routine is used by the interrupt handler to schedule processing in - * the software interrupt portion of the driver. - */ -void uart_write_wakeup(struct uart_port *port) -{ - struct uart_state *state = port->state; - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - BUG_ON(!state); - tasklet_schedule(&state->tlet); -} - -static void uart_stop(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - port->ops->stop_tx(port); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __uart_start(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - if (!uart_circ_empty(&state->xmit) && state->xmit.buf && - !tty->stopped && !tty->hw_stopped) - port->ops->start_tx(port); -} - -static void uart_start(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - __uart_start(tty); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void uart_tasklet_action(unsigned long data) -{ - struct uart_state *state = (struct uart_state *)data; - tty_wakeup(state->port.tty); -} - -static inline void -uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) -{ - unsigned long flags; - unsigned int old; - - spin_lock_irqsave(&port->lock, flags); - old = port->mctrl; - port->mctrl = (old & ~clear) | set; - if (old != port->mctrl) - port->ops->set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); -} - -#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) -#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) - -/* - * Startup the port. This will be called once per open. All calls - * will be serialised by the per-port mutex. - */ -static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - unsigned long page; - int retval = 0; - - if (port->flags & ASYNC_INITIALIZED) - return 0; - - /* - * Set the TTY IO error marker - we will only clear this - * once we have successfully opened the port. Also set - * up the tty->alt_speed kludge - */ - set_bit(TTY_IO_ERROR, &tty->flags); - - if (uport->type == PORT_UNKNOWN) - return 0; - - /* - * Initialise and allocate the transmit and temporary - * buffer. - */ - if (!state->xmit.buf) { - /* This is protected by the per port mutex */ - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - state->xmit.buf = (unsigned char *) page; - uart_circ_clear(&state->xmit); - } - - retval = uport->ops->startup(uport); - if (retval == 0) { - if (init_hw) { - /* - * Initialise the hardware port settings. - */ - uart_change_speed(tty, state, NULL); - - /* - * Setup the RTS and DTR signals once the - * port is open and ready to respond. - */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); - } - - if (port->flags & ASYNC_CTS_FLOW) { - spin_lock_irq(&uport->lock); - if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - tty->hw_stopped = 1; - spin_unlock_irq(&uport->lock); - } - - set_bit(ASYNCB_INITIALIZED, &port->flags); - - clear_bit(TTY_IO_ERROR, &tty->flags); - } - - if (retval && capable(CAP_SYS_ADMIN)) - retval = 0; - - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. Calls to - * uart_shutdown are serialised by the per-port semaphore. - */ -static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - - /* - * Set the TTY IO error marker - */ - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - - if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { - /* - * Turn off DTR and RTS early. - */ - if (!tty || (tty->termios->c_cflag & HUPCL)) - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free - * the irq here so the queue might never be woken up. Note - * that we won't end up waiting on delta_msr_wait again since - * any outstanding file descriptors should be pointing at - * hung_up_tty_fops now. - */ - wake_up_interruptible(&port->delta_msr_wait); - - /* - * Free the IRQ and disable the port. - */ - uport->ops->shutdown(uport); - - /* - * Ensure that the IRQ handler isn't running on another CPU. - */ - synchronize_irq(uport->irq); - } - - /* - * kill off our tasklet - */ - tasklet_kill(&state->tlet); - - /* - * Free the transmit buffer page. - */ - if (state->xmit.buf) { - free_page((unsigned long)state->xmit.buf); - state->xmit.buf = NULL; - } -} - -/** - * uart_update_timeout - update per-port FIFO timeout. - * @port: uart_port structure describing the port - * @cflag: termios cflag value - * @baud: speed of the port - * - * Set the port FIFO timeout value. The @cflag value should - * reflect the actual hardware settings. - */ -void -uart_update_timeout(struct uart_port *port, unsigned int cflag, - unsigned int baud) -{ - unsigned int bits; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - bits = 7; - break; - case CS6: - bits = 8; - break; - case CS7: - bits = 9; - break; - default: - bits = 10; - break; /* CS8 */ - } - - if (cflag & CSTOPB) - bits++; - if (cflag & PARENB) - bits++; - - /* - * The total number of bits to be transmitted in the fifo. - */ - bits = bits * port->fifosize; - - /* - * Figure the timeout to send the above number of bits. - * Add .02 seconds of slop - */ - port->timeout = (HZ * bits) / baud + HZ/50; -} - -EXPORT_SYMBOL(uart_update_timeout); - -/** - * uart_get_baud_rate - return baud rate for a particular port - * @port: uart_port structure describing the port in question. - * @termios: desired termios settings. - * @old: old termios (or NULL) - * @min: minimum acceptable baud rate - * @max: maximum acceptable baud rate - * - * Decode the termios structure into a numeric baud rate, - * taking account of the magic 38400 baud rate (with spd_* - * flags), and mapping the %B0 rate to 9600 baud. - * - * If the new baud rate is invalid, try the old termios setting. - * If it's still invalid, we try 9600 baud. - * - * Update the @termios structure to reflect the baud rate - * we're actually going to be using. Don't do this for the case - * where B0 is requested ("hang up"). - */ -unsigned int -uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old, unsigned int min, unsigned int max) -{ - unsigned int try, baud, altbaud = 38400; - int hung_up = 0; - upf_t flags = port->flags & UPF_SPD_MASK; - - if (flags == UPF_SPD_HI) - altbaud = 57600; - else if (flags == UPF_SPD_VHI) - altbaud = 115200; - else if (flags == UPF_SPD_SHI) - altbaud = 230400; - else if (flags == UPF_SPD_WARP) - altbaud = 460800; - - for (try = 0; try < 2; try++) { - baud = tty_termios_baud_rate(termios); - - /* - * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... - * Die! Die! Die! - */ - if (baud == 38400) - baud = altbaud; - - /* - * Special case: B0 rate. - */ - if (baud == 0) { - hung_up = 1; - baud = 9600; - } - - if (baud >= min && baud <= max) - return baud; - - /* - * Oops, the quotient was zero. Try again with - * the old baud rate if possible. - */ - termios->c_cflag &= ~CBAUD; - if (old) { - baud = tty_termios_baud_rate(old); - if (!hung_up) - tty_termios_encode_baud_rate(termios, - baud, baud); - old = NULL; - continue; - } - - /* - * As a last resort, if the range cannot be met then clip to - * the nearest chip supported rate. - */ - if (!hung_up) { - if (baud <= min) - tty_termios_encode_baud_rate(termios, - min + 1, min + 1); - else - tty_termios_encode_baud_rate(termios, - max - 1, max - 1); - } - } - /* Should never happen */ - WARN_ON(1); - return 0; -} - -EXPORT_SYMBOL(uart_get_baud_rate); - -/** - * uart_get_divisor - return uart clock divisor - * @port: uart_port structure describing the port. - * @baud: desired baud rate - * - * Calculate the uart clock divisor for the port. - */ -unsigned int -uart_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int quot; - - /* - * Old custom speed handling. - */ - if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) - quot = port->custom_divisor; - else - quot = (port->uartclk + (8 * baud)) / (16 * baud); - - return quot; -} - -EXPORT_SYMBOL(uart_get_divisor); - -/* FIXME: Consistent locking policy */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios) -{ - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - struct ktermios *termios; - - /* - * If we have no tty, termios, or the port does not exist, - * then we can't set the parameters for this port. - */ - if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) - return; - - termios = tty->termios; - - /* - * Set flags based on termios cflag - */ - if (termios->c_cflag & CRTSCTS) - set_bit(ASYNCB_CTS_FLOW, &port->flags); - else - clear_bit(ASYNCB_CTS_FLOW, &port->flags); - - if (termios->c_cflag & CLOCAL) - clear_bit(ASYNCB_CHECK_CD, &port->flags); - else - set_bit(ASYNCB_CHECK_CD, &port->flags); - - uport->ops->set_termios(uport, termios, old_termios); -} - -static inline int __uart_put_char(struct uart_port *port, - struct circ_buf *circ, unsigned char c) -{ - unsigned long flags; - int ret = 0; - - if (!circ->buf) - return 0; - - spin_lock_irqsave(&port->lock, flags); - if (uart_circ_chars_free(circ) != 0) { - circ->buf[circ->head] = c; - circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); - ret = 1; - } - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -static int uart_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct uart_state *state = tty->driver_data; - - return __uart_put_char(state->uart_port, &state->xmit, ch); -} - -static void uart_flush_chars(struct tty_struct *tty) -{ - uart_start(tty); -} - -static int uart_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port; - struct circ_buf *circ; - unsigned long flags; - int c, ret = 0; - - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - if (!state) { - WARN_ON(1); - return -EL3HLT; - } - - port = state->uart_port; - circ = &state->xmit; - - if (!circ->buf) - return 0; - - spin_lock_irqsave(&port->lock, flags); - while (1) { - c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) - break; - memcpy(circ->buf + circ->head, buf, c); - circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); - buf += c; - count -= c; - ret += c; - } - spin_unlock_irqrestore(&port->lock, flags); - - uart_start(tty); - return ret; -} - -static int uart_write_room(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&state->uart_port->lock, flags); - ret = uart_circ_chars_free(&state->xmit); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - return ret; -} - -static int uart_chars_in_buffer(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&state->uart_port->lock, flags); - ret = uart_circ_chars_pending(&state->xmit); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - return ret; -} - -static void uart_flush_buffer(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port; - unsigned long flags; - - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - if (!state) { - WARN_ON(1); - return; - } - - port = state->uart_port; - pr_debug("uart_flush_buffer(%d) called\n", tty->index); - - spin_lock_irqsave(&port->lock, flags); - uart_circ_clear(&state->xmit); - if (port->ops->flush_buffer) - port->ops->flush_buffer(port); - spin_unlock_irqrestore(&port->lock, flags); - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void uart_send_xchar(struct tty_struct *tty, char ch) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - if (port->ops->send_xchar) - port->ops->send_xchar(port, ch); - else { - port->x_char = ch; - if (ch) { - spin_lock_irqsave(&port->lock, flags); - port->ops->start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); - } - } -} - -static void uart_throttle(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - - if (I_IXOFF(tty)) - uart_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) - uart_clear_mctrl(state->uart_port, TIOCM_RTS); -} - -static void uart_unthrottle(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - if (I_IXOFF(tty)) { - if (port->x_char) - port->x_char = 0; - else - uart_send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) - uart_set_mctrl(port, TIOCM_RTS); -} - -static int uart_get_info(struct uart_state *state, - struct serial_struct __user *retinfo) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - struct serial_struct tmp; - - memset(&tmp, 0, sizeof(tmp)); - - /* Ensure the state we copy is consistent and no hardware changes - occur as we go */ - mutex_lock(&port->mutex); - - tmp.type = uport->type; - tmp.line = uport->line; - tmp.port = uport->iobase; - if (HIGH_BITS_OFFSET) - tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; - tmp.irq = uport->irq; - tmp.flags = uport->flags; - tmp.xmit_fifo_size = uport->fifosize; - tmp.baud_base = uport->uartclk / 16; - tmp.close_delay = port->close_delay / 10; - tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : - port->closing_wait / 10; - tmp.custom_divisor = uport->custom_divisor; - tmp.hub6 = uport->hub6; - tmp.io_type = uport->iotype; - tmp.iomem_reg_shift = uport->regshift; - tmp.iomem_base = (void *)(unsigned long)uport->mapbase; - - mutex_unlock(&port->mutex); - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int uart_set_info(struct tty_struct *tty, struct uart_state *state, - struct serial_struct __user *newinfo) -{ - struct serial_struct new_serial; - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - unsigned long new_port; - unsigned int change_irq, change_port, closing_wait; - unsigned int old_custom_divisor, close_delay; - upf_t old_flags, new_flags; - int retval = 0; - - if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) - return -EFAULT; - - new_port = new_serial.port; - if (HIGH_BITS_OFFSET) - new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; - - new_serial.irq = irq_canonicalize(new_serial.irq); - close_delay = new_serial.close_delay * 10; - closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; - - /* - * This semaphore protects port->count. It is also - * very useful to prevent opens. Also, take the - * port configuration semaphore to make sure that a - * module insertion/removal doesn't change anything - * under us. - */ - mutex_lock(&port->mutex); - - change_irq = !(uport->flags & UPF_FIXED_PORT) - && new_serial.irq != uport->irq; - - /* - * Since changing the 'type' of the port changes its resource - * allocations, we should treat type changes the same as - * IO port changes. - */ - change_port = !(uport->flags & UPF_FIXED_PORT) - && (new_port != uport->iobase || - (unsigned long)new_serial.iomem_base != uport->mapbase || - new_serial.hub6 != uport->hub6 || - new_serial.io_type != uport->iotype || - new_serial.iomem_reg_shift != uport->regshift || - new_serial.type != uport->type); - - old_flags = uport->flags; - new_flags = new_serial.flags; - old_custom_divisor = uport->custom_divisor; - - if (!capable(CAP_SYS_ADMIN)) { - retval = -EPERM; - if (change_irq || change_port || - (new_serial.baud_base != uport->uartclk / 16) || - (close_delay != port->close_delay) || - (closing_wait != port->closing_wait) || - (new_serial.xmit_fifo_size && - new_serial.xmit_fifo_size != uport->fifosize) || - (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) - goto exit; - uport->flags = ((uport->flags & ~UPF_USR_MASK) | - (new_flags & UPF_USR_MASK)); - uport->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - /* - * Ask the low level driver to verify the settings. - */ - if (uport->ops->verify_port) - retval = uport->ops->verify_port(uport, &new_serial); - - if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || - (new_serial.baud_base < 9600)) - retval = -EINVAL; - - if (retval) - goto exit; - - if (change_port || change_irq) { - retval = -EBUSY; - - /* - * Make sure that we are the sole user of this port. - */ - if (tty_port_users(port) > 1) - goto exit; - - /* - * We need to shutdown the serial port at the old - * port/type/irq combination. - */ - uart_shutdown(tty, state); - } - - if (change_port) { - unsigned long old_iobase, old_mapbase; - unsigned int old_type, old_iotype, old_hub6, old_shift; - - old_iobase = uport->iobase; - old_mapbase = uport->mapbase; - old_type = uport->type; - old_hub6 = uport->hub6; - old_iotype = uport->iotype; - old_shift = uport->regshift; - - /* - * Free and release old regions - */ - if (old_type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - uport->iobase = new_port; - uport->type = new_serial.type; - uport->hub6 = new_serial.hub6; - uport->iotype = new_serial.io_type; - uport->regshift = new_serial.iomem_reg_shift; - uport->mapbase = (unsigned long)new_serial.iomem_base; - - /* - * Claim and map the new regions - */ - if (uport->type != PORT_UNKNOWN) { - retval = uport->ops->request_port(uport); - } else { - /* Always success - Jean II */ - retval = 0; - } - - /* - * If we fail to request resources for the - * new port, try to restore the old settings. - */ - if (retval && old_type != PORT_UNKNOWN) { - uport->iobase = old_iobase; - uport->type = old_type; - uport->hub6 = old_hub6; - uport->iotype = old_iotype; - uport->regshift = old_shift; - uport->mapbase = old_mapbase; - retval = uport->ops->request_port(uport); - /* - * If we failed to restore the old settings, - * we fail like this. - */ - if (retval) - uport->type = PORT_UNKNOWN; - - /* - * We failed anyway. - */ - retval = -EBUSY; - /* Added to return the correct error -Ram Gupta */ - goto exit; - } - } - - if (change_irq) - uport->irq = new_serial.irq; - if (!(uport->flags & UPF_FIXED_PORT)) - uport->uartclk = new_serial.baud_base * 16; - uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | - (new_flags & UPF_CHANGE_MASK); - uport->custom_divisor = new_serial.custom_divisor; - port->close_delay = close_delay; - port->closing_wait = closing_wait; - if (new_serial.xmit_fifo_size) - uport->fifosize = new_serial.xmit_fifo_size; - if (port->tty) - port->tty->low_latency = - (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - retval = 0; - if (uport->type == PORT_UNKNOWN) - goto exit; - if (port->flags & ASYNC_INITIALIZED) { - if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || - old_custom_divisor != uport->custom_divisor) { - /* - * If they're setting up a custom divisor or speed, - * instead of clearing it, then bitch about it. No - * need to rate-limit; it's CAP_SYS_ADMIN only. - */ - if (uport->flags & UPF_SPD_MASK) { - char buf[64]; - printk(KERN_NOTICE - "%s sets custom speed on %s. This " - "is deprecated.\n", current->comm, - tty_name(port->tty, buf)); - } - uart_change_speed(tty, state, NULL); - } - } else - retval = uart_startup(tty, state, 1); - exit: - mutex_unlock(&port->mutex); - return retval; -} - -/** - * uart_get_lsr_info - get line status register info - * @tty: tty associated with the UART - * @state: UART being queried - * @value: returned modem value - * - * Note: uart_ioctl protects us against hangups. - */ -static int uart_get_lsr_info(struct tty_struct *tty, - struct uart_state *state, unsigned int __user *value) -{ - struct uart_port *uport = state->uart_port; - unsigned int result; - - result = uport->ops->tx_empty(uport); - - /* - * If we're about to load something into the transmit - * register, we'll pretend the transmitter isn't empty to - * avoid a race condition (depending on when the transmit - * interrupt happens). - */ - if (uport->x_char || - ((uart_circ_chars_pending(&state->xmit) > 0) && - !tty->stopped && !tty->hw_stopped)) - result &= ~TIOCSER_TEMT; - - return put_user(result, value); -} - -static int uart_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - int result = -EIO; - - mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { - result = uport->mctrl; - - spin_lock_irq(&uport->lock); - result |= uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - } - mutex_unlock(&port->mutex); - - return result; -} - -static int -uart_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - int ret = -EIO; - - mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { - uart_update_mctrl(uport, set, clear); - ret = 0; - } - mutex_unlock(&port->mutex); - return ret; -} - -static int uart_break_ctl(struct tty_struct *tty, int break_state) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - - mutex_lock(&port->mutex); - - if (uport->type != PORT_UNKNOWN) - uport->ops->break_ctl(uport, break_state); - - mutex_unlock(&port->mutex); - return 0; -} - -static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - int flags, ret; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - /* - * Take the per-port semaphore. This prevents count from - * changing, and hence any extra opens of the port while - * we're auto-configuring. - */ - if (mutex_lock_interruptible(&port->mutex)) - return -ERESTARTSYS; - - ret = -EBUSY; - if (tty_port_users(port) == 1) { - uart_shutdown(tty, state); - - /* - * If we already have a port type configured, - * we must release its resources. - */ - if (uport->type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - flags = UART_CONFIG_TYPE; - if (uport->flags & UPF_AUTO_IRQ) - flags |= UART_CONFIG_IRQ; - - /* - * This will claim the ports resources if - * a port is found. - */ - uport->ops->config_port(uport, flags); - - ret = uart_startup(tty, state, 1); - } - mutex_unlock(&port->mutex); - return ret; -} - -/* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - * - * FIXME: This wants extracting into a common all driver implementation - * of TIOCMWAIT using tty_port. - */ -static int -uart_wait_modem_status(struct uart_state *state, unsigned long arg) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - DECLARE_WAITQUEUE(wait, current); - struct uart_icount cprev, cnow; - int ret; - - /* - * note the counters on entry - */ - spin_lock_irq(&uport->lock); - memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); - - /* - * Force modem status interrupts on - */ - uport->ops->enable_ms(uport); - spin_unlock_irq(&uport->lock); - - add_wait_queue(&port->delta_msr_wait, &wait); - for (;;) { - spin_lock_irq(&uport->lock); - memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); - - set_current_state(TASK_INTERRUPTIBLE); - - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - ret = 0; - break; - } - - schedule(); - - /* see if a signal did it */ - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - - cprev = cnow; - } - - current->state = TASK_RUNNING; - remove_wait_queue(&port->delta_msr_wait, &wait); - - return ret; -} - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int uart_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct uart_state *state = tty->driver_data; - struct uart_icount cnow; - struct uart_port *uport = state->uart_port; - - spin_lock_irq(&uport->lock); - memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * Called via sys_ioctl. We can use spin_lock_irq() here. - */ -static int -uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - void __user *uarg = (void __user *)arg; - int ret = -ENOIOCTLCMD; - - - /* - * These ioctls don't rely on the hardware to be present. - */ - switch (cmd) { - case TIOCGSERIAL: - ret = uart_get_info(state, uarg); - break; - - case TIOCSSERIAL: - ret = uart_set_info(tty, state, uarg); - break; - - case TIOCSERCONFIG: - ret = uart_do_autoconfig(tty, state); - break; - - case TIOCSERGWILD: /* obsolete */ - case TIOCSERSWILD: /* obsolete */ - ret = 0; - break; - } - - if (ret != -ENOIOCTLCMD) - goto out; - - if (tty->flags & (1 << TTY_IO_ERROR)) { - ret = -EIO; - goto out; - } - - /* - * The following should only be used when hardware is present. - */ - switch (cmd) { - case TIOCMIWAIT: - ret = uart_wait_modem_status(state, arg); - break; - } - - if (ret != -ENOIOCTLCMD) - goto out; - - mutex_lock(&port->mutex); - - if (tty_hung_up_p(filp)) { - ret = -EIO; - goto out_up; - } - - /* - * All these rely on hardware being present and need to be - * protected against the tty being hung up. - */ - switch (cmd) { - case TIOCSERGETLSR: /* Get line status register */ - ret = uart_get_lsr_info(tty, state, uarg); - break; - - default: { - struct uart_port *uport = state->uart_port; - if (uport->ops->ioctl) - ret = uport->ops->ioctl(uport, cmd, arg); - break; - } - } -out_up: - mutex_unlock(&port->mutex); -out: - return ret; -} - -static void uart_set_ldisc(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *uport = state->uart_port; - - if (uport->ops->set_ldisc) - uport->ops->set_ldisc(uport, tty->termios->c_line); -} - -static void uart_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; - - - /* - * These are the bits that are used to setup various - * flags in the low level driver. We can ignore the Bfoo - * bits in c_cflag; c_[io]speed will always be set - * appropriately by set_termios() in tty_ioctl.c - */ -#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - if ((cflag ^ old_termios->c_cflag) == 0 && - tty->termios->c_ospeed == old_termios->c_ospeed && - tty->termios->c_ispeed == old_termios->c_ispeed && - RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) { - return; - } - - uart_change_speed(tty, state, old_termios); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) - uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); - /* Handle transition away from B0 status */ - else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { - unsigned int mask = TIOCM_DTR; - if (!(cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) - mask |= TIOCM_RTS; - uart_set_mctrl(state->uart_port, mask); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - spin_lock_irqsave(&state->uart_port->lock, flags); - tty->hw_stopped = 0; - __uart_start(tty); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - } - /* Handle turning on CRTSCTS */ - else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { - spin_lock_irqsave(&state->uart_port->lock, flags); - if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { - tty->hw_stopped = 1; - state->uart_port->ops->stop_tx(state->uart_port); - } - spin_unlock_irqrestore(&state->uart_port->lock, flags); - } -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&state->uart_port.open_wait); -#endif -} - -/* - * In 2.4.5, calls to this will be serialized via the BKL in - * linux/drivers/char/tty_io.c:tty_release() - * linux/drivers/char/tty_io.c:do_tty_handup() - */ -static void uart_close(struct tty_struct *tty, struct file *filp) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port; - struct uart_port *uport; - unsigned long flags; - - BUG_ON(!tty_locked()); - - if (!state) - return; - - uport = state->uart_port; - port = &state->port; - - pr_debug("uart_close(%d) called\n", uport->line); - - mutex_lock(&port->mutex); - spin_lock_irqsave(&port->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); - goto done; - } - - if ((tty->count == 1) && (port->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. port->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " - "port->count is %d\n", port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", - tty->name, port->count); - port->count = 0; - } - if (port->count) { - spin_unlock_irqrestore(&port->lock, flags); - goto done; - } - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters by - * setting tty->closing. - */ - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); - - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { - /* - * hack: open-coded tty_wait_until_sent to avoid - * recursive tty_lock - */ - long timeout = msecs_to_jiffies(port->closing_wait); - if (wait_event_interruptible_timeout(tty->write_wait, - !tty_chars_in_buffer(tty), timeout) >= 0) - __uart_wait_until_sent(uport, timeout); - } - - /* - * At this point, we stop accepting input. To do this, we - * disable the receive line status interrupts. - */ - if (port->flags & ASYNC_INITIALIZED) { - unsigned long flags; - spin_lock_irqsave(&uport->lock, flags); - uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&uport->lock, flags); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - __uart_wait_until_sent(uport, uport->timeout); - } - - uart_shutdown(tty, state); - uart_flush_buffer(tty); - - tty_ldisc_flush(tty); - - tty_port_tty_set(port, NULL); - spin_lock_irqsave(&port->lock, flags); - tty->closing = 0; - - if (port->blocked_open) { - spin_unlock_irqrestore(&port->lock, flags); - if (port->close_delay) - msleep_interruptible(port->close_delay); - spin_lock_irqsave(&port->lock, flags); - } else if (!uart_console(uport)) { - spin_unlock_irqrestore(&port->lock, flags); - uart_change_pm(state, 3); - spin_lock_irqsave(&port->lock, flags); - } - - /* - * Wake up anyone trying to open this port. - */ - clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - spin_unlock_irqrestore(&port->lock, flags); - wake_up_interruptible(&port->open_wait); - -done: - mutex_unlock(&port->mutex); -} - -static void __uart_wait_until_sent(struct uart_port *port, int timeout) -{ - unsigned long char_time, expire; - - if (port->type == PORT_UNKNOWN || port->fifosize == 0) - return; - - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (port->timeout - HZ/50) / port->fifosize; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than port->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*port->timeout. - */ - if (timeout == 0 || timeout > 2 * port->timeout) - timeout = 2 * port->timeout; - - expire = jiffies + timeout; - - pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", - port->line, jiffies, expire); - - /* - * Check whether the transmitter is empty every 'char_time'. - * 'timeout' / 'expire' give us the maximum amount of time - * we wait. - */ - while (!port->ops->tx_empty(port)) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (time_after(jiffies, expire)) - break; - } - set_current_state(TASK_RUNNING); /* might not be needed */ -} - -static void uart_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - tty_lock(); - __uart_wait_until_sent(port, timeout); - tty_unlock(); -} - -/* - * This is called with the BKL held in - * linux/drivers/char/tty_io.c:do_tty_hangup() - * We're called from the eventd thread, so we can sleep for - * a _short_ time only. - */ -static void uart_hangup(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - unsigned long flags; - - BUG_ON(!tty_locked()); - pr_debug("uart_hangup(%d)\n", state->uart_port->line); - - mutex_lock(&port->mutex); - if (port->flags & ASYNC_NORMAL_ACTIVE) { - uart_flush_buffer(tty); - uart_shutdown(tty, state); - spin_lock_irqsave(&port->lock, flags); - port->count = 0; - clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - spin_unlock_irqrestore(&port->lock, flags); - tty_port_tty_set(port, NULL); - wake_up_interruptible(&port->open_wait); - wake_up_interruptible(&port->delta_msr_wait); - } - mutex_unlock(&port->mutex); -} - -/** - * uart_update_termios - update the terminal hw settings - * @tty: tty associated with UART - * @state: UART to update - * - * Copy across the serial console cflag setting into the termios settings - * for the initial open of the port. This allows continuity between the - * kernel settings, and the settings init adopts when it opens the port - * for the first time. - */ -static void uart_update_termios(struct tty_struct *tty, - struct uart_state *state) -{ - struct uart_port *port = state->uart_port; - - if (uart_console(port) && port->cons->cflag) { - tty->termios->c_cflag = port->cons->cflag; - port->cons->cflag = 0; - } - - /* - * If the device failed to grab its irq resources, - * or some other error occurred, don't try to talk - * to the port hardware. - */ - if (!(tty->flags & (1 << TTY_IO_ERROR))) { - /* - * Make termios settings take effect. - */ - uart_change_speed(tty, state, NULL); - - /* - * And finally enable the RTS and DTR signals. - */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } -} - -static int uart_carrier_raised(struct tty_port *port) -{ - struct uart_state *state = container_of(port, struct uart_state, port); - struct uart_port *uport = state->uart_port; - int mctrl; - spin_lock_irq(&uport->lock); - uport->ops->enable_ms(uport); - mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - if (mctrl & TIOCM_CAR) - return 1; - return 0; -} - -static void uart_dtr_rts(struct tty_port *port, int onoff) -{ - struct uart_state *state = container_of(port, struct uart_state, port); - struct uart_port *uport = state->uart_port; - - if (onoff) { - uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - - /* - * If this is the first open to succeed, - * adjust things to suit. - */ - if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) - uart_update_termios(port->tty, state); - } - else - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); -} - -static struct uart_state *uart_get(struct uart_driver *drv, int line) -{ - struct uart_state *state; - struct tty_port *port; - int ret = 0; - - state = drv->state + line; - port = &state->port; - if (mutex_lock_interruptible(&port->mutex)) { - ret = -ERESTARTSYS; - goto err; - } - - port->count++; - if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { - ret = -ENXIO; - goto err_unlock; - } - return state; - - err_unlock: - port->count--; - mutex_unlock(&port->mutex); - err: - return ERR_PTR(ret); -} - -/* - * calls to uart_open are serialised by the BKL in - * fs/char_dev.c:chrdev_open() - * Note that if this fails, then uart_close() _will_ be called. - * - * In time, we want to scrap the "opening nonpresent ports" - * behaviour and implement an alternative way for setserial - * to set base addresses/ports/types. This will allow us to - * get rid of a certain amount of extra tests. - */ -static int uart_open(struct tty_struct *tty, struct file *filp) -{ - struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; - struct uart_state *state; - struct tty_port *port; - int retval, line = tty->index; - - BUG_ON(!tty_locked()); - pr_debug("uart_open(%d) called\n", line); - - /* - * tty->driver->num won't change, so we won't fail here with - * tty->driver_data set to something non-NULL (and therefore - * we won't get caught by uart_close()). - */ - retval = -ENODEV; - if (line >= tty->driver->num) - goto fail; - - /* - * We take the semaphore inside uart_get to guarantee that we won't - * be re-entered while allocating the state structure, or while we - * request any IRQs that the driver may need. This also has the nice - * side-effect that it delays the action of uart_hangup, so we can - * guarantee that state->port.tty will always contain something - * reasonable. - */ - state = uart_get(drv, line); - if (IS_ERR(state)) { - retval = PTR_ERR(state); - goto fail; - } - port = &state->port; - - /* - * Once we set tty->driver_data here, we are guaranteed that - * uart_close() will decrement the driver module use count. - * Any failures from here onwards should not touch the count. - */ - tty->driver_data = state; - state->uart_port->state = state; - tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; - tty->alt_speed = 0; - tty_port_tty_set(port, tty); - - /* - * If the port is in the middle of closing, bail out now. - */ - if (tty_hung_up_p(filp)) { - retval = -EAGAIN; - port->count--; - mutex_unlock(&port->mutex); - goto fail; - } - - /* - * Make sure the device is in D0 state. - */ - if (port->count == 1) - uart_change_pm(state, 0); - - /* - * Start up the serial port. - */ - retval = uart_startup(tty, state, 0); - - /* - * If we succeeded, wait until the port is ready. - */ - mutex_unlock(&port->mutex); - if (retval == 0) - retval = tty_port_block_til_ready(port, tty, filp); - -fail: - return retval; -} - -static const char *uart_type(struct uart_port *port) -{ - const char *str = NULL; - - if (port->ops->type) - str = port->ops->type(port); - - if (!str) - str = "unknown"; - - return str; -} - -#ifdef CONFIG_PROC_FS - -static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) -{ - struct uart_state *state = drv->state + i; - struct tty_port *port = &state->port; - int pm_state; - struct uart_port *uport = state->uart_port; - char stat_buf[32]; - unsigned int status; - int mmio; - - if (!uport) - return; - - mmio = uport->iotype >= UPIO_MEM; - seq_printf(m, "%d: uart:%s %s%08llX irq:%d", - uport->line, uart_type(uport), - mmio ? "mmio:0x" : "port:", - mmio ? (unsigned long long)uport->mapbase - : (unsigned long long)uport->iobase, - uport->irq); - - if (uport->type == PORT_UNKNOWN) { - seq_putc(m, '\n'); - return; - } - - if (capable(CAP_SYS_ADMIN)) { - mutex_lock(&port->mutex); - pm_state = state->pm_state; - if (pm_state) - uart_change_pm(state, 0); - spin_lock_irq(&uport->lock); - status = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - if (pm_state) - uart_change_pm(state, pm_state); - mutex_unlock(&port->mutex); - - seq_printf(m, " tx:%d rx:%d", - uport->icount.tx, uport->icount.rx); - if (uport->icount.frame) - seq_printf(m, " fe:%d", - uport->icount.frame); - if (uport->icount.parity) - seq_printf(m, " pe:%d", - uport->icount.parity); - if (uport->icount.brk) - seq_printf(m, " brk:%d", - uport->icount.brk); - if (uport->icount.overrun) - seq_printf(m, " oe:%d", - uport->icount.overrun); - -#define INFOBIT(bit, str) \ - if (uport->mctrl & (bit)) \ - strncat(stat_buf, (str), sizeof(stat_buf) - \ - strlen(stat_buf) - 2) -#define STATBIT(bit, str) \ - if (status & (bit)) \ - strncat(stat_buf, (str), sizeof(stat_buf) - \ - strlen(stat_buf) - 2) - - stat_buf[0] = '\0'; - stat_buf[1] = '\0'; - INFOBIT(TIOCM_RTS, "|RTS"); - STATBIT(TIOCM_CTS, "|CTS"); - INFOBIT(TIOCM_DTR, "|DTR"); - STATBIT(TIOCM_DSR, "|DSR"); - STATBIT(TIOCM_CAR, "|CD"); - STATBIT(TIOCM_RNG, "|RI"); - if (stat_buf[0]) - stat_buf[0] = ' '; - - seq_puts(m, stat_buf); - } - seq_putc(m, '\n'); -#undef STATBIT -#undef INFOBIT -} - -static int uart_proc_show(struct seq_file *m, void *v) -{ - struct tty_driver *ttydrv = m->private; - struct uart_driver *drv = ttydrv->driver_state; - int i; - - seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", - "", "", ""); - for (i = 0; i < drv->nr; i++) - uart_line_info(m, drv, i); - return 0; -} - -static int uart_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, uart_proc_show, PDE(inode)->data); -} - -static const struct file_operations uart_proc_fops = { - .owner = THIS_MODULE, - .open = uart_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) -/* - * uart_console_write - write a console message to a serial port - * @port: the port to write the message - * @s: array of characters - * @count: number of characters in string to write - * @write: function to write character to port - */ -void uart_console_write(struct uart_port *port, const char *s, - unsigned int count, - void (*putchar)(struct uart_port *, int)) -{ - unsigned int i; - - for (i = 0; i < count; i++, s++) { - if (*s == '\n') - putchar(port, '\r'); - putchar(port, *s); - } -} -EXPORT_SYMBOL_GPL(uart_console_write); - -/* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ -struct uart_port * __init -uart_get_console(struct uart_port *ports, int nr, struct console *co) -{ - int idx = co->index; - - if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && - ports[idx].membase == NULL)) - for (idx = 0; idx < nr; idx++) - if (ports[idx].iobase != 0 || - ports[idx].membase != NULL) - break; - - co->index = idx; - - return ports + idx; -} - -/** - * uart_parse_options - Parse serial port baud/parity/bits/flow contro. - * @options: pointer to option string - * @baud: pointer to an 'int' variable for the baud rate. - * @parity: pointer to an 'int' variable for the parity. - * @bits: pointer to an 'int' variable for the number of data bits. - * @flow: pointer to an 'int' variable for the flow control character. - * - * uart_parse_options decodes a string containing the serial console - * options. The format of the string is , - * eg: 115200n8r - */ -void -uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) -{ - char *s = options; - - *baud = simple_strtoul(s, NULL, 10); - while (*s >= '0' && *s <= '9') - s++; - if (*s) - *parity = *s++; - if (*s) - *bits = *s++ - '0'; - if (*s) - *flow = *s; -} -EXPORT_SYMBOL_GPL(uart_parse_options); - -struct baud_rates { - unsigned int rate; - unsigned int cflag; -}; - -static const struct baud_rates baud_rates[] = { - { 921600, B921600 }, - { 460800, B460800 }, - { 230400, B230400 }, - { 115200, B115200 }, - { 57600, B57600 }, - { 38400, B38400 }, - { 19200, B19200 }, - { 9600, B9600 }, - { 4800, B4800 }, - { 2400, B2400 }, - { 1200, B1200 }, - { 0, B38400 } -}; - -/** - * uart_set_options - setup the serial console parameters - * @port: pointer to the serial ports uart_port structure - * @co: console pointer - * @baud: baud rate - * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) - * @bits: number of data bits - * @flow: flow control character - 'r' (rts) - */ -int -uart_set_options(struct uart_port *port, struct console *co, - int baud, int parity, int bits, int flow) -{ - struct ktermios termios; - static struct ktermios dummy; - int i; - - /* - * Ensure that the serial console lock is initialised - * early. - */ - spin_lock_init(&port->lock); - lockdep_set_class(&port->lock, &port_lock_key); - - memset(&termios, 0, sizeof(struct ktermios)); - - termios.c_cflag = CREAD | HUPCL | CLOCAL; - - /* - * Construct a cflag setting. - */ - for (i = 0; baud_rates[i].rate; i++) - if (baud_rates[i].rate <= baud) - break; - - termios.c_cflag |= baud_rates[i].cflag; - - if (bits == 7) - termios.c_cflag |= CS7; - else - termios.c_cflag |= CS8; - - switch (parity) { - case 'o': case 'O': - termios.c_cflag |= PARODD; - /*fall through*/ - case 'e': case 'E': - termios.c_cflag |= PARENB; - break; - } - - if (flow == 'r') - termios.c_cflag |= CRTSCTS; - - /* - * some uarts on other side don't support no flow control. - * So we set * DTR in host uart to make them happy - */ - port->mctrl |= TIOCM_DTR; - - port->ops->set_termios(port, &termios, &dummy); - /* - * Allow the setting of the UART parameters with a NULL console - * too: - */ - if (co) - co->cflag = termios.c_cflag; - - return 0; -} -EXPORT_SYMBOL_GPL(uart_set_options); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ - -static void uart_change_pm(struct uart_state *state, int pm_state) -{ - struct uart_port *port = state->uart_port; - - if (state->pm_state != pm_state) { - if (port->ops->pm) - port->ops->pm(port, pm_state, state->pm_state); - state->pm_state = pm_state; - } -} - -struct uart_match { - struct uart_port *port; - struct uart_driver *driver; -}; - -static int serial_match_port(struct device *dev, void *data) -{ - struct uart_match *match = data; - struct tty_driver *tty_drv = match->driver->tty_driver; - dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + - match->port->line; - - return dev->devt == devt; /* Actually, only one tty per port */ -} - -int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - struct device *tty_dev; - struct uart_match match = {uport, drv}; - struct tty_struct *tty; - - mutex_lock(&port->mutex); - - /* Must be inside the mutex lock until we convert to tty_port */ - tty = port->tty; - - tty_dev = device_find_child(uport->dev, &match, serial_match_port); - if (device_may_wakeup(tty_dev)) { - if (!enable_irq_wake(uport->irq)) - uport->irq_wake = 1; - put_device(tty_dev); - mutex_unlock(&port->mutex); - return 0; - } - if (console_suspend_enabled || !uart_console(uport)) - uport->suspended = 1; - - if (port->flags & ASYNC_INITIALIZED) { - const struct uart_ops *ops = uport->ops; - int tries; - - if (console_suspend_enabled || !uart_console(uport)) { - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); - - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); - } - - /* - * Wait for the transmitter to empty. - */ - for (tries = 3; !ops->tx_empty(uport) && tries; tries--) - msleep(10); - if (!tries) - printk(KERN_ERR "%s%s%s%d: Unable to drain " - "transmitter\n", - uport->dev ? dev_name(uport->dev) : "", - uport->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + uport->line); - - if (console_suspend_enabled || !uart_console(uport)) - ops->shutdown(uport); - } - - /* - * Disable the console device before suspending. - */ - if (console_suspend_enabled && uart_console(uport)) - console_stop(uport->cons); - - if (console_suspend_enabled || !uart_console(uport)) - uart_change_pm(state, 3); - - mutex_unlock(&port->mutex); - - return 0; -} - -int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - struct device *tty_dev; - struct uart_match match = {uport, drv}; - struct ktermios termios; - - mutex_lock(&port->mutex); - - tty_dev = device_find_child(uport->dev, &match, serial_match_port); - if (!uport->suspended && device_may_wakeup(tty_dev)) { - if (uport->irq_wake) { - disable_irq_wake(uport->irq); - uport->irq_wake = 0; - } - mutex_unlock(&port->mutex); - return 0; - } - uport->suspended = 0; - - /* - * Re-enable the console device after suspending. - */ - if (console_suspend_enabled && uart_console(uport)) { - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - - /* - * If that's unset, use the tty termios setting. - */ - if (port->tty && port->tty->termios && termios.c_cflag == 0) - termios = *(port->tty->termios); - - uart_change_pm(state, 0); - uport->ops->set_termios(uport, &termios, NULL); - console_start(uport->cons); - } - - if (port->flags & ASYNC_SUSPENDED) { - const struct uart_ops *ops = uport->ops; - int ret; - - uart_change_pm(state, 0); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, 0); - spin_unlock_irq(&uport->lock); - if (console_suspend_enabled || !uart_console(uport)) { - /* Protected by port mutex for now */ - struct tty_struct *tty = port->tty; - ret = ops->startup(uport); - if (ret == 0) { - if (tty) - uart_change_speed(tty, state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(tty, state); - } - } - - clear_bit(ASYNCB_SUSPENDED, &port->flags); - } - - mutex_unlock(&port->mutex); - - return 0; -} - -static inline void -uart_report_port(struct uart_driver *drv, struct uart_port *port) -{ - char address[64]; - - switch (port->iotype) { - case UPIO_PORT: - snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase); - break; - case UPIO_HUB6: - snprintf(address, sizeof(address), - "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); - break; - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_TSI: - case UPIO_DWAPB: - case UPIO_DWAPB32: - snprintf(address, sizeof(address), - "MMIO 0x%llx", (unsigned long long)port->mapbase); - break; - default: - strlcpy(address, "*unknown*", sizeof(address)); - break; - } - - printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", - port->dev ? dev_name(port->dev) : "", - port->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + port->line, - address, port->irq, uart_type(port)); -} - -static void -uart_configure_port(struct uart_driver *drv, struct uart_state *state, - struct uart_port *port) -{ - unsigned int flags; - - /* - * If there isn't a port here, don't do anything further. - */ - if (!port->iobase && !port->mapbase && !port->membase) - return; - - /* - * Now do the auto configuration stuff. Note that config_port - * is expected to claim the resources and map the port for us. - */ - flags = 0; - if (port->flags & UPF_AUTO_IRQ) - flags |= UART_CONFIG_IRQ; - if (port->flags & UPF_BOOT_AUTOCONF) { - if (!(port->flags & UPF_FIXED_TYPE)) { - port->type = PORT_UNKNOWN; - flags |= UART_CONFIG_TYPE; - } - port->ops->config_port(port, flags); - } - - if (port->type != PORT_UNKNOWN) { - unsigned long flags; - - uart_report_port(drv, port); - - /* Power up port for set_mctrl() */ - uart_change_pm(state, 0); - - /* - * Ensure that the modem control lines are de-activated. - * keep the DTR setting that is set in uart_set_options() - * We probably don't need a spinlock around this, but - */ - spin_lock_irqsave(&port->lock, flags); - port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR); - spin_unlock_irqrestore(&port->lock, flags); - - /* - * If this driver supports console, and it hasn't been - * successfully registered yet, try to re-register it. - * It may be that the port was not available. - */ - if (port->cons && !(port->cons->flags & CON_ENABLED)) - register_console(port->cons); - - /* - * Power down all ports by default, except the - * console if we have one. - */ - if (!uart_console(port)) - uart_change_pm(state, 3); - } -} - -#ifdef CONFIG_CONSOLE_POLL - -static int uart_poll_init(struct tty_driver *driver, int line, char *options) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (!state || !state->uart_port) - return -1; - - port = state->uart_port; - if (!(port->ops->poll_get_char && port->ops->poll_put_char)) - return -1; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(port, NULL, baud, parity, bits, flow); - } - - return 0; -} - -static int uart_poll_get_char(struct tty_driver *driver, int line) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - - if (!state || !state->uart_port) - return -1; - - port = state->uart_port; - return port->ops->poll_get_char(port); -} - -static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - - if (!state || !state->uart_port) - return; - - port = state->uart_port; - port->ops->poll_put_char(port, ch); -} -#endif - -static const struct tty_operations uart_ops = { - .open = uart_open, - .close = uart_close, - .write = uart_write, - .put_char = uart_put_char, - .flush_chars = uart_flush_chars, - .write_room = uart_write_room, - .chars_in_buffer= uart_chars_in_buffer, - .flush_buffer = uart_flush_buffer, - .ioctl = uart_ioctl, - .throttle = uart_throttle, - .unthrottle = uart_unthrottle, - .send_xchar = uart_send_xchar, - .set_termios = uart_set_termios, - .set_ldisc = uart_set_ldisc, - .stop = uart_stop, - .start = uart_start, - .hangup = uart_hangup, - .break_ctl = uart_break_ctl, - .wait_until_sent= uart_wait_until_sent, -#ifdef CONFIG_PROC_FS - .proc_fops = &uart_proc_fops, -#endif - .tiocmget = uart_tiocmget, - .tiocmset = uart_tiocmset, - .get_icount = uart_get_icount, -#ifdef CONFIG_CONSOLE_POLL - .poll_init = uart_poll_init, - .poll_get_char = uart_poll_get_char, - .poll_put_char = uart_poll_put_char, -#endif -}; - -static const struct tty_port_operations uart_port_ops = { - .carrier_raised = uart_carrier_raised, - .dtr_rts = uart_dtr_rts, -}; - -/** - * uart_register_driver - register a driver with the uart core layer - * @drv: low level driver structure - * - * Register a uart driver with the core driver. We in turn register - * with the tty layer, and initialise the core driver per-port state. - * - * We have a proc file in /proc/tty/driver which is named after the - * normal driver. - * - * drv->port should be NULL, and the per-port structures should be - * registered using uart_add_one_port after this call has succeeded. - */ -int uart_register_driver(struct uart_driver *drv) -{ - struct tty_driver *normal; - int i, retval; - - BUG_ON(drv->state); - - /* - * Maybe we should be using a slab cache for this, especially if - * we have a large number of ports to handle. - */ - drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); - if (!drv->state) - goto out; - - normal = alloc_tty_driver(drv->nr); - if (!normal) - goto out_kfree; - - drv->tty_driver = normal; - - normal->owner = drv->owner; - normal->driver_name = drv->driver_name; - normal->name = drv->dev_name; - normal->major = drv->major; - normal->minor_start = drv->minor; - normal->type = TTY_DRIVER_TYPE_SERIAL; - normal->subtype = SERIAL_TYPE_NORMAL; - normal->init_termios = tty_std_termios; - normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; - normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - normal->driver_state = drv; - tty_set_operations(normal, &uart_ops); - - /* - * Initialise the UART state(s). - */ - for (i = 0; i < drv->nr; i++) { - struct uart_state *state = drv->state + i; - struct tty_port *port = &state->port; - - tty_port_init(port); - port->ops = &uart_port_ops; - port->close_delay = 500; /* .5 seconds */ - port->closing_wait = 30000; /* 30 seconds */ - tasklet_init(&state->tlet, uart_tasklet_action, - (unsigned long)state); - } - - retval = tty_register_driver(normal); - if (retval >= 0) - return retval; - - put_tty_driver(normal); -out_kfree: - kfree(drv->state); -out: - return -ENOMEM; -} - -/** - * uart_unregister_driver - remove a driver from the uart core layer - * @drv: low level driver structure - * - * Remove all references to a driver from the core driver. The low - * level driver must have removed all its ports via the - * uart_remove_one_port() if it registered them with uart_add_one_port(). - * (ie, drv->port == NULL) - */ -void uart_unregister_driver(struct uart_driver *drv) -{ - struct tty_driver *p = drv->tty_driver; - tty_unregister_driver(p); - put_tty_driver(p); - kfree(drv->state); - drv->tty_driver = NULL; -} - -struct tty_driver *uart_console_device(struct console *co, int *index) -{ - struct uart_driver *p = co->data; - *index = co->index; - return p->tty_driver; -} - -/** - * uart_add_one_port - attach a driver-defined port structure - * @drv: pointer to the uart low level driver structure for this port - * @uport: uart port structure to use for this port. - * - * This allows the driver to register its own uart_port structure - * with the core driver. The main purpose is to allow the low - * level uart drivers to expand uart_port, rather than having yet - * more levels of structures. - */ -int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state; - struct tty_port *port; - int ret = 0; - struct device *tty_dev; - - BUG_ON(in_interrupt()); - - if (uport->line >= drv->nr) - return -EINVAL; - - state = drv->state + uport->line; - port = &state->port; - - mutex_lock(&port_mutex); - mutex_lock(&port->mutex); - if (state->uart_port) { - ret = -EINVAL; - goto out; - } - - state->uart_port = uport; - state->pm_state = -1; - - uport->cons = drv->cons; - uport->state = state; - - /* - * If this port is a console, then the spinlock is already - * initialised. - */ - if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) { - spin_lock_init(&uport->lock); - lockdep_set_class(&uport->lock, &port_lock_key); - } - - uart_configure_port(drv, state, uport); - - /* - * Register the port whether it's detected or not. This allows - * setserial to be used to alter this ports parameters. - */ - tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); - if (likely(!IS_ERR(tty_dev))) { - device_init_wakeup(tty_dev, 1); - device_set_wakeup_enable(tty_dev, 0); - } else - printk(KERN_ERR "Cannot register tty device on line %d\n", - uport->line); - - /* - * Ensure UPF_DEAD is not set. - */ - uport->flags &= ~UPF_DEAD; - - out: - mutex_unlock(&port->mutex); - mutex_unlock(&port_mutex); - - return ret; -} - -/** - * uart_remove_one_port - detach a driver defined port structure - * @drv: pointer to the uart low level driver structure for this port - * @uport: uart port structure for this port - * - * This unhooks (and hangs up) the specified port structure from the - * core driver. No further calls will be made to the low-level code - * for this port. - */ -int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - - BUG_ON(in_interrupt()); - - if (state->uart_port != uport) - printk(KERN_ALERT "Removing wrong port: %p != %p\n", - state->uart_port, uport); - - mutex_lock(&port_mutex); - - /* - * Mark the port "dead" - this prevents any opens from - * succeeding while we shut down the port. - */ - mutex_lock(&port->mutex); - uport->flags |= UPF_DEAD; - mutex_unlock(&port->mutex); - - /* - * Remove the devices from the tty layer - */ - tty_unregister_device(drv->tty_driver, uport->line); - - if (port->tty) - tty_vhangup(port->tty); - - /* - * Free the port IO and memory resources, if any. - */ - if (uport->type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - /* - * Indicate that there isn't a port here anymore. - */ - uport->type = PORT_UNKNOWN; - - /* - * Kill the tasklet, and free resources. - */ - tasklet_kill(&state->tlet); - - state->uart_port = NULL; - mutex_unlock(&port_mutex); - - return 0; -} - -/* - * Are the two ports equivalent? - */ -int uart_match_port(struct uart_port *port1, struct uart_port *port2) -{ - if (port1->iotype != port2->iotype) - return 0; - - switch (port1->iotype) { - case UPIO_PORT: - return (port1->iobase == port2->iobase); - case UPIO_HUB6: - return (port1->iobase == port2->iobase) && - (port1->hub6 == port2->hub6); - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_TSI: - case UPIO_DWAPB: - case UPIO_DWAPB32: - return (port1->mapbase == port2->mapbase); - } - return 0; -} -EXPORT_SYMBOL(uart_match_port); - -EXPORT_SYMBOL(uart_write_wakeup); -EXPORT_SYMBOL(uart_register_driver); -EXPORT_SYMBOL(uart_unregister_driver); -EXPORT_SYMBOL(uart_suspend_port); -EXPORT_SYMBOL(uart_resume_port); -EXPORT_SYMBOL(uart_add_one_port); -EXPORT_SYMBOL(uart_remove_one_port); - -MODULE_DESCRIPTION("Serial driver core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c deleted file mode 100644 index 93760b2..0000000 --- a/drivers/serial/serial_cs.c +++ /dev/null @@ -1,869 +0,0 @@ -/*====================================================================== - - A driver for PCMCIA serial devices - - serial_cs.c 1.134 2002/05/04 05:48:53 - - The contents of this file are subject to the Mozilla Public - License Version 1.1 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of - the License at http://www.mozilla.org/MPL/ - - Software distributed under the License is distributed on an "AS - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - implied. See the License for the specific language governing - rights and limitations under the License. - - The initial developer of the original code is David A. Hinds - . Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - - Alternatively, the contents of this file may be used under the - terms of the GNU General Public License version 2 (the "GPL"), in which - case the provisions of the GPL are applicable instead of the - above. If you wish to allow the use of your version of this file - only under the terms of the GPL and not to allow others to use - your version of this file under the MPL, indicate your decision - by deleting the provisions above and replace them with the notice - and other provisions required by the GPL. If you do not delete - the provisions above, a recipient may use your version of this - file under either the MPL or the GPL. - -======================================================================*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "8250.h" - - -/*====================================================================*/ - -/* Parameters that can be set with 'insmod' */ - -/* Enable the speaker? */ -static int do_sound = 1; -/* Skip strict UART tests? */ -static int buggy_uart; - -module_param(do_sound, int, 0444); -module_param(buggy_uart, int, 0444); - -/*====================================================================*/ - -/* Table of multi-port card ID's */ - -struct serial_quirk { - unsigned int manfid; - unsigned int prodid; - int multi; /* 1 = multifunction, > 1 = # ports */ - void (*config)(struct pcmcia_device *); - void (*setup)(struct pcmcia_device *, struct uart_port *); - void (*wakeup)(struct pcmcia_device *); - int (*post)(struct pcmcia_device *); -}; - -struct serial_info { - struct pcmcia_device *p_dev; - int ndev; - int multi; - int slave; - int manfid; - int prodid; - int c950ctrl; - int line[4]; - const struct serial_quirk *quirk; -}; - -struct serial_cfg_mem { - tuple_t tuple; - cisparse_t parse; - u_char buf[256]; -}; - -/* - * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" - * manfid 0x0160, 0x0104 - * This card appears to have a 14.7456MHz clock. - */ -/* Generic Modem: MD55x (GPRS/EDGE) have - * Elan VPU16551 UART with 14.7456MHz oscillator - * manfid 0x015D, 0x4C45 - */ -static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) -{ - port->uartclk = 14745600; -} - -static int quirk_post_ibm(struct pcmcia_device *link) -{ - u8 val; - int ret; - - ret = pcmcia_read_config_byte(link, 0x800, &val); - if (ret) - goto failed; - - ret = pcmcia_write_config_byte(link, 0x800, val | 1); - if (ret) - goto failed; - return 0; - - failed: - return -ENODEV; -} - -/* - * Nokia cards are not really multiport cards. Shouldn't this - * be handled by setting the quirk entry .multi = 0 | 1 ? - */ -static void quirk_config_nokia(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi > 1) - info->multi = 1; -} - -static void quirk_wakeup_oxsemi(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->c950ctrl) - outb(12, info->c950ctrl + 1); -} - -/* request_region? oxsemi branch does no request_region too... */ -/* - * This sequence is needed to properly initialize MC45 attached to OXCF950. - * I tried decreasing these msleep()s, but it worked properly (survived - * 1000 stop/start operations) with these timeouts (or bigger). - */ -static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - unsigned int ctrl = info->c950ctrl; - - outb(0xA, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(300); - outb(0xC, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(200); - outb(0xF, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(100); - outb(0xC, ctrl + 1); -} - -/* - * Socket Dual IO: this enables irq's for second port - */ -static void quirk_config_socket(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi) - link->config_flags |= CONF_ENABLE_ESR; -} - -static const struct serial_quirk quirks[] = { - { - .manfid = 0x0160, - .prodid = 0x0104, - .multi = -1, - .setup = quirk_setup_brainboxes_0104, - }, { - .manfid = 0x015D, - .prodid = 0x4C45, - .multi = -1, - .setup = quirk_setup_brainboxes_0104, - }, { - .manfid = MANFID_IBM, - .prodid = ~0, - .multi = -1, - .post = quirk_post_ibm, - }, { - .manfid = MANFID_INTEL, - .prodid = PRODID_INTEL_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_NATINST, - .prodid = PRODID_NATINST_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_NOKIA, - .prodid = ~0, - .multi = -1, - .config = quirk_config_nokia, - }, { - .manfid = MANFID_OMEGA, - .prodid = PRODID_OMEGA_QSP_100, - .multi = 4, - }, { - .manfid = MANFID_OXSEMI, - .prodid = ~0, - .multi = -1, - .wakeup = quirk_wakeup_oxsemi, - }, { - .manfid = MANFID_POSSIO, - .prodid = PRODID_POSSIO_GCC, - .multi = -1, - .wakeup = quirk_wakeup_possio_gcc, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_D1, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_G, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_SOCKET, - .prodid = PRODID_SOCKET_DUAL_RS232, - .multi = 2, - .config = quirk_config_socket, - }, { - .manfid = MANFID_SOCKET, - .prodid = ~0, - .multi = -1, - .config = quirk_config_socket, - } -}; - - -static int serial_config(struct pcmcia_device * link); - - -static void serial_remove(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - dev_dbg(&link->dev, "serial_release\n"); - - /* - * Recheck to see if the device is still configured. - */ - for (i = 0; i < info->ndev; i++) - serial8250_unregister_port(info->line[i]); - - if (!info->slave) - pcmcia_disable_device(link); -} - -static int serial_suspend(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_suspend_port(info->line[i]); - - return 0; -} - -static int serial_resume(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_resume_port(info->line[i]); - - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - return 0; -} - -static int serial_probe(struct pcmcia_device *link) -{ - struct serial_info *info; - - dev_dbg(&link->dev, "serial_attach()\n"); - - /* Create new serial device */ - info = kzalloc(sizeof (*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - info->p_dev = link; - link->priv = info; - - link->config_flags |= CONF_ENABLE_IRQ; - if (do_sound) - link->config_flags |= CONF_ENABLE_SPKR; - - return serial_config(link); -} - -static void serial_detach(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - dev_dbg(&link->dev, "serial_detach\n"); - - /* - * Ensure that the ports have been released. - */ - serial_remove(link); - - /* free bits */ - kfree(info); -} - -/*====================================================================*/ - -static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, - unsigned int iobase, int irq) -{ - struct uart_port port; - int line; - - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; - port.irq = irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &handle->dev; - if (buggy_uart) - port.flags |= UPF_BUGGY_UART; - - if (info->quirk && info->quirk->setup) - info->quirk->setup(handle, &port); - - line = serial8250_register_port(&port); - if (line < 0) { - printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " - "0x%04lx, irq %d failed\n", (u_long)iobase, irq); - return -EINVAL; - } - - info->line[info->ndev] = line; - info->ndev++; - - return 0; -} - -/*====================================================================*/ - -static int pfc_config(struct pcmcia_device *p_dev) -{ - unsigned int port = 0; - struct serial_info *info = p_dev->priv; - - if ((p_dev->resource[1]->end != 0) && - (resource_size(p_dev->resource[1]) == 8)) { - port = p_dev->resource[1]->start; - info->slave = 1; - } else if ((info->manfid == MANFID_OSITECH) && - (resource_size(p_dev->resource[0]) == 0x40)) { - port = p_dev->resource[0]->start + 0x28; - info->slave = 1; - } - if (info->slave) - return setup_serial(p_dev, info, port, p_dev->irq); - - dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); - return -ENODEV; -} - -static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - static const int size_table[2] = { 8, 16 }; - int *try = priv_data; - - if (p_dev->resource[0]->start == 0) - return -ENODEV; - - if ((*try & 0x1) == 0) - p_dev->io_lines = 16; - - if (p_dev->resource[0]->end != size_table[(*try >> 1)]) - return -ENODEV; - - p_dev->resource[0]->end = 8; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - return pcmcia_request_io(p_dev); -} - -static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - void *priv_data) -{ - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - int j; - - if (p_dev->io_lines > 3) - return -ENODEV; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = 8; - - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; -} - -static int simple_config(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i = -ENODEV, try; - - /* First pass: look for a config entry that looks normal. - * Two tries: without IO aliases, then with aliases */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; - for (try = 0; try < 4; try++) - if (!pcmcia_loop_config(link, simple_config_check, &try)) - goto found_port; - - /* Second pass: try to find an entry that isn't picky about - its base address, then try to grab any standard serial port - address, and finally try to get any free port. */ - if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) - goto found_port; - - dev_warn(&link->dev, "no usable port range found, giving up\n"); - return -1; - -found_port: - if (info->multi && (info->manfid == MANFID_3COM)) - link->config_index &= ~(0x08); - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_enable_device(link); - if (i != 0) - return -1; - return setup_serial(link, info, link->resource[0]->start, link->irq); -} - -static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - int *multi = priv_data; - - if (p_dev->resource[1]->end) - return -EINVAL; - - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if (p_dev->resource[0]->end <= 8) - return -EINVAL; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = *multi * 8; - - if (pcmcia_request_io(p_dev)) - return -ENODEV; - return 0; -} - -static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - void *priv_data) -{ - int *base2 = priv_data; - - if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) - return -ENODEV; - - p_dev->resource[0]->end = p_dev->resource[1]->end = 8; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - if (pcmcia_request_io(p_dev)) - return -ENODEV; - - *base2 = p_dev->resource[0]->start + 8; - return 0; -} - -static int multi_config(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i, base2 = 0; - - link->config_flags |= CONF_AUTO_SET_IO; - /* First, look for a generic full-sized window */ - if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) - base2 = link->resource[0]->start + 8; - else { - /* If that didn't work, look for two windows */ - info->multi = 2; - if (pcmcia_loop_config(link, multi_config_check_notpicky, - &base2)) { - dev_warn(&link->dev, "no usable port range " - "found, giving up\n"); - return -ENODEV; - } - } - - if (!link->irq) - dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_enable_device(link); - if (i != 0) - return -ENODEV; - - /* The Oxford Semiconductor OXCF950 cards are in fact single-port: - * 8 registers are for the UART, the others are extra registers. - * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. - */ - if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && - info->prodid == PRODID_POSSIO_GCC)) { - int err; - - if (link->config_index == 1 || - link->config_index == 3) { - err = setup_serial(link, info, base2, - link->irq); - base2 = link->resource[0]->start; - } else { - err = setup_serial(link, info, link->resource[0]->start, - link->irq); - } - info->c950ctrl = base2; - - /* - * FIXME: We really should wake up the port prior to - * handing it over to the serial layer. - */ - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - return 0; - } - - setup_serial(link, info, link->resource[0]->start, link->irq); - for (i = 0; i < info->multi - 1; i++) - setup_serial(link, info, base2 + (8 * i), - link->irq); - return 0; -} - -static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) -{ - struct serial_info *info = p_dev->priv; - - if (!p_dev->resource[0]->end) - return -EINVAL; - - if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) - info->multi = p_dev->resource[0]->end >> 3; - - if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) - && (p_dev->resource[1]->end == 8)) - info->multi = 2; - - return 0; /* break */ -} - - -static int serial_config(struct pcmcia_device * link) -{ - struct serial_info *info = link->priv; - int i; - - dev_dbg(&link->dev, "serial_config\n"); - - /* Is this a compliant multifunction card? */ - info->multi = (link->socket->functions > 1); - - /* Is this a multiport card? */ - info->manfid = link->manf_id; - info->prodid = link->card_id; - - for (i = 0; i < ARRAY_SIZE(quirks); i++) - if ((quirks[i].manfid == ~0 || - quirks[i].manfid == info->manfid) && - (quirks[i].prodid == ~0 || - quirks[i].prodid == info->prodid)) { - info->quirk = &quirks[i]; - break; - } - - /* Another check for dual-serial cards: look for either serial or - multifunction cards that ask for appropriate IO port ranges */ - if ((info->multi == 0) && - (link->has_func_id) && - (link->socket->pcmcia_pfc == 0) && - ((link->func_id == CISTPL_FUNCID_MULTI) || - (link->func_id == CISTPL_FUNCID_SERIAL))) - pcmcia_loop_config(link, serial_check_for_multi, info); - - /* - * Apply any multi-port quirk. - */ - if (info->quirk && info->quirk->multi != -1) - info->multi = info->quirk->multi; - - dev_info(&link->dev, - "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", - link->manf_id, link->card_id, - link->socket->pcmcia_pfc, info->multi, info->quirk); - if (link->socket->pcmcia_pfc) - i = pfc_config(link); - else if (info->multi > 1) - i = multi_config(link); - else - i = simple_config(link); - - if (i || info->ndev == 0) - goto failed; - - /* - * Apply any post-init quirk. FIXME: This should really happen - * before we register the port, since it might already be in use. - */ - if (info->quirk && info->quirk->post) - if (info->quirk->post(link)) - goto failed; - - return 0; - -failed: - dev_warn(&link->dev, "failed to initialize\n"); - serial_remove(link); - return -ENODEV; -} - -static struct pcmcia_device_id serial_ids[] = { - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), - PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), - PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), - PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), - PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), - PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), - PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), - PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ - PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ - PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), - PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ - PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ - PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), - PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), - PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), - PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), - PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), - PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), - PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), - PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), - PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), - PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), - PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), - PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), - PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), - PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), - PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), - PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), - PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), - PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ - PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), - PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), - /* too generic */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ - PCMCIA_DEVICE_FUNC_ID(2), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, serial_ids); - -MODULE_FIRMWARE("cis/PCMLM28.cis"); -MODULE_FIRMWARE("cis/DP83903.cis"); -MODULE_FIRMWARE("cis/3CCFEM556.cis"); -MODULE_FIRMWARE("cis/3CXEM556.cis"); -MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); -MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); -MODULE_FIRMWARE("cis/SW_555_SER.cis"); -MODULE_FIRMWARE("cis/MT5634ZLX.cis"); -MODULE_FIRMWARE("cis/COMpad2.cis"); -MODULE_FIRMWARE("cis/COMpad4.cis"); -MODULE_FIRMWARE("cis/RS-COM-2P.cis"); - -static struct pcmcia_driver serial_cs_driver = { - .owner = THIS_MODULE, - .name = "serial_cs", - .probe = serial_probe, - .remove = serial_detach, - .id_table = serial_ids, - .suspend = serial_suspend, - .resume = serial_resume, -}; - -static int __init init_serial_cs(void) -{ - return pcmcia_register_driver(&serial_cs_driver); -} - -static void __exit exit_serial_cs(void) -{ - pcmcia_unregister_driver(&serial_cs_driver); -} - -module_init(init_serial_cs); -module_exit(exit_serial_cs); - -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c deleted file mode 100644 index b196202..0000000 --- a/drivers/serial/serial_ks8695.c +++ /dev/null @@ -1,705 +0,0 @@ -/* - * drivers/serial/serial_ks8695.c - * - * Driver for KS8695 serial ports - * - * Based on drivers/serial/serial_amba.c, by Kam Lee. - * - * Copyright 2002-2005 Micrel Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - - -#define SERIAL_KS8695_MAJOR 204 -#define SERIAL_KS8695_MINOR 16 -#define SERIAL_KS8695_DEVNAME "ttyAM" - -#define SERIAL_KS8695_NR 1 - -/* - * Access macros for the KS8695 UART - */ -#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF) -#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH) -#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC) -#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC) -#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS) -#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS) -#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC) -#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC) -#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC) -#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC) -#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD) -#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD) - -#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST) - -#define UART_DUMMY_LSR_RX 0x100 -#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4) - -static inline int tx_enabled(struct uart_port *port) -{ - return port->unused[0] & 1; -} - -static inline int rx_enabled(struct uart_port *port) -{ - return port->unused[0] & 2; -} - -static inline int ms_enabled(struct uart_port *port) -{ - return port->unused[0] & 4; -} - -static inline void ms_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 4; - else - port->unused[0] &= ~4; -} - -static inline void rx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 2; - else - port->unused[0] &= ~2; -} - -static inline void tx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 1; - else - port->unused[0] &= ~1; -} - - -#ifdef SUPPORT_SYSRQ -static struct console ks8695_console; -#endif - -static void ks8695uart_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - /* use disable_irq_nosync() and not disable_irq() to avoid self - * imposed deadlock by not waiting for irq handler to end, - * since this ks8695uart_stop_tx() is called from interrupt context. - */ - disable_irq_nosync(KS8695_IRQ_UART_TX); - tx_enable(port, 0); - } -} - -static void ks8695uart_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(KS8695_IRQ_UART_TX); - tx_enable(port, 1); - } -} - -static void ks8695uart_stop_rx(struct uart_port *port) -{ - if (rx_enabled(port)) { - disable_irq(KS8695_IRQ_UART_RX); - rx_enable(port, 0); - } -} - -static void ks8695uart_enable_ms(struct uart_port *port) -{ - if (!ms_enabled(port)) { - enable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,1); - } -} - -static void ks8695uart_disable_ms(struct uart_port *port) -{ - if (ms_enabled(port)) { - disable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,0); - } -} - -static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, lsr, flg, max_count = 256; - - status = UART_GET_LSR(port); /* clears pending LSR interrupts */ - while ((status & URLS_URDR) && max_count--) { - ch = UART_GET_CHAR(port); - flg = TTY_NORMAL; - - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX; - if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) { - if (lsr & URLS_URBI) { - lsr &= ~(URLS_URFE | URLS_URPE); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } - if (lsr & URLS_URPE) - port->icount.parity++; - if (lsr & URLS_URFE) - port->icount.frame++; - if (lsr & URLS_URROE) - port->icount.overrun++; - - lsr &= port->read_status_mask; - - if (lsr & URLS_URBI) - flg = TTY_BREAK; - else if (lsr & URLS_URPE) - flg = TTY_PARITY; - else if (lsr & URLS_URFE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, lsr, URLS_URROE, ch, flg); - -ignore_char: - status = UART_GET_LSR(port); - } - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - - -static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - unsigned int count; - - if (port->x_char) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return IRQ_HANDLED; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - ks8695uart_stop_tx(port); - return IRQ_HANDLED; - } - - count = 16; /* fifo size */ - while (!uart_circ_empty(xmit) && (count-- > 0)) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - ks8695uart_stop_tx(port); - - return IRQ_HANDLED; -} - -static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status; - - /* - * clear modem interrupt by reading MSR - */ - status = UART_GET_MSR(port); - - if (status & URMS_URDDCD) - uart_handle_dcd_change(port, status & URMS_URDDCD); - - if (status & URMS_URDDST) - port->icount.dsr++; - - if (status & URMS_URDCTS) - uart_handle_cts_change(port, status & URMS_URDCTS); - - if (status & URMS_URTERI) - port->icount.rng++; - - wake_up_interruptible(&port->state->port.delta_msr_wait); - - return IRQ_HANDLED; -} - -static unsigned int ks8695uart_tx_empty(struct uart_port *port) -{ - return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0; -} - -static unsigned int ks8695uart_get_mctrl(struct uart_port *port) -{ - unsigned int result = 0; - unsigned int status; - - status = UART_GET_MSR(port); - if (status & URMS_URDCD) - result |= TIOCM_CAR; - if (status & URMS_URDSR) - result |= TIOCM_DSR; - if (status & URMS_URCTS) - result |= TIOCM_CTS; - if (status & URMS_URRI) - result |= TIOCM_RI; - - return result; -} - -static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - unsigned int mcr; - - mcr = UART_GET_MCR(port); - if (mctrl & TIOCM_RTS) - mcr |= URMC_URRTS; - else - mcr &= ~URMC_URRTS; - - if (mctrl & TIOCM_DTR) - mcr |= URMC_URDTR; - else - mcr &= ~URMC_URDTR; - - UART_PUT_MCR(port, mcr); -} - -static void ks8695uart_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - if (break_state == -1) - lcr |= URLC_URSBC; - else - lcr &= ~URLC_URSBC; - - UART_PUT_LCR(port, lcr); -} - -static int ks8695uart_startup(struct uart_port *port) -{ - int retval; - - set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN); - tx_enable(port, 0); - rx_enable(port, 1); - ms_enable(port, 1); - - /* - * Allocate the IRQ - */ - retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port); - if (retval) - goto err_tx; - - retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port); - if (retval) - goto err_rx; - - retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port); - if (retval) - goto err_ls; - - retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port); - if (retval) - goto err_ms; - - return 0; - -err_ms: - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); -err_ls: - free_irq(KS8695_IRQ_UART_RX, port); -err_rx: - free_irq(KS8695_IRQ_UART_TX, port); -err_tx: - return retval; -} - -static void ks8695uart_shutdown(struct uart_port *port) -{ - /* - * Free the interrupt - */ - free_irq(KS8695_IRQ_UART_RX, port); - free_irq(KS8695_IRQ_UART_TX, port); - free_irq(KS8695_IRQ_UART_MODEM_STATUS, port); - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); - - /* disable break condition and fifos */ - UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC); - UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE); -} - -static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) -{ - unsigned int lcr, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr = URCL_5; - break; - case CS6: - lcr = URCL_6; - break; - case CS7: - lcr = URCL_7; - break; - default: - lcr = URCL_8; - break; - } - - /* stop bits */ - if (termios->c_cflag & CSTOPB) - lcr |= URLC_URSB; - - /* parity */ - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ - if (termios->c_cflag & PARODD) - lcr |= URPE_MARK; - else - lcr |= URPE_SPACE; - } - else if (termios->c_cflag & PARODD) - lcr |= URPE_ODD; - else - lcr |= URPE_EVEN; - } - - if (port->fifosize > 1) - fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = URLS_URROE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= URLS_URBI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= URLS_URBI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= URLS_URROE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_LSR_RX; - - /* first, disable everything */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - ks8695uart_enable_ms(port); - else - ks8695uart_disable_ms(port); - - /* Set baud rate */ - UART_PUT_BRDR(port, quot); - - UART_PUT_LCR(port, lcr); - UART_PUT_FCR(port, fcr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *ks8695uart_type(struct uart_port *port) -{ - return port->type == PORT_KS8695 ? "KS8695" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void ks8695uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int ks8695uart_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - "serial_ks8695") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void ks8695uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_KS8695; - ks8695uart_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695) - ret = -EINVAL; - if (ser->irq != port->irq) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops ks8695uart_pops = { - .tx_empty = ks8695uart_tx_empty, - .set_mctrl = ks8695uart_set_mctrl, - .get_mctrl = ks8695uart_get_mctrl, - .stop_tx = ks8695uart_stop_tx, - .start_tx = ks8695uart_start_tx, - .stop_rx = ks8695uart_stop_rx, - .enable_ms = ks8695uart_enable_ms, - .break_ctl = ks8695uart_break_ctl, - .startup = ks8695uart_startup, - .shutdown = ks8695uart_shutdown, - .set_termios = ks8695uart_set_termios, - .type = ks8695uart_type, - .release_port = ks8695uart_release_port, - .request_port = ks8695uart_request_port, - .config_port = ks8695uart_config_port, - .verify_port = ks8695uart_verify_port, -}; - -static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { - { - .membase = (void *) KS8695_UART_VA, - .mapbase = KS8695_UART_VA, - .iotype = SERIAL_IO_MEM, - .irq = KS8695_IRQ_UART_TX, - .uartclk = KS8695_CLOCK_RATE * 16, - .fifosize = 16, - .ops = &ks8695uart_pops, - .flags = ASYNC_BOOT_AUTOCONF, - .line = 0, - } -}; - -#ifdef CONFIG_SERIAL_KS8695_CONSOLE -static void ks8695_console_putchar(struct uart_port *port, int ch) -{ - while (!(UART_GET_LSR(port) & URLS_URTHRE)) - barrier(); - - UART_PUT_CHAR(port, ch); -} - -static void ks8695_console_write(struct console *co, const char *s, u_int count) -{ - struct uart_port *port = ks8695uart_ports + co->index; - - uart_console_write(port, s, count, ks8695_console_putchar); -} - -static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - switch (lcr & URLC_PARITY) { - case URPE_ODD: - *parity = 'o'; - break; - case URPE_EVEN: - *parity = 'e'; - break; - default: - *parity = 'n'; - } - - switch (lcr & URLC_URCL) { - case URCL_5: - *bits = 5; - break; - case URCL_6: - *bits = 6; - break; - case URCL_7: - *bits = 7; - break; - default: - *bits = 8; - } - - *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF); - *baud /= 16; - *baud &= 0xFFFFFFF0; -} - -static int __init ks8695_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - ks8695_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver ks8695_reg; - -static struct console ks8695_console = { - .name = SERIAL_KS8695_DEVNAME, - .write = ks8695_console_write, - .device = uart_console_device, - .setup = ks8695_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ks8695_reg, -}; - -static int __init ks8695_console_init(void) -{ - add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); - register_console(&ks8695_console); - return 0; -} - -console_initcall(ks8695_console_init); - -#define KS8695_CONSOLE &ks8695_console -#else -#define KS8695_CONSOLE NULL -#endif - -static struct uart_driver ks8695_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_ks8695", - .dev_name = SERIAL_KS8695_DEVNAME, - .major = SERIAL_KS8695_MAJOR, - .minor = SERIAL_KS8695_MINOR, - .nr = SERIAL_KS8695_NR, - .cons = KS8695_CONSOLE, -}; - -static int __init ks8695uart_init(void) -{ - int i, ret; - - printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n"); - - ret = uart_register_driver(&ks8695_reg); - if (ret) - return ret; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]); - - return 0; -} - -static void __exit ks8695uart_exit(void) -{ - int i; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]); - uart_unregister_driver(&ks8695_reg); -} - -module_init(ks8695uart_init); -module_exit(ks8695uart_exit); - -MODULE_DESCRIPTION("KS8695 serial port driver"); -MODULE_AUTHOR("Micrel Inc."); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c deleted file mode 100644 index ea74470..0000000 --- a/drivers/serial/serial_lh7a40x.c +++ /dev/null @@ -1,682 +0,0 @@ -/* drivers/serial/serial_lh7a40x.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* Driver for Sharp LH7A40X embedded serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. - * - * --- - * - * This driver supports the embedded UARTs of the Sharp LH7A40X series - * CPUs. While similar to the 16550 and other UART chips, there is - * nothing close to register compatibility. Moreover, some of the - * modem control lines are not available, either in the chip or they - * are lacking in the board-level implementation. - * - * - Use of SIRDIS - * For simplicity, we disable the IR functions of any UART whenever - * we enable it. - * - */ - - -#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEV_MAJOR 204 -#define DEV_MINOR 16 -#define DEV_NR 3 - -#define ISR_LOOP_LIMIT 256 - -#define UR(p,o) _UR ((p)->membase, o) -#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) -#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) -#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) - -#define UART_REG_SIZE 32 - -#define UART_R_DATA (0x00) -#define UART_R_FCON (0x04) -#define UART_R_BRCON (0x08) -#define UART_R_CON (0x0c) -#define UART_R_STATUS (0x10) -#define UART_R_RAWISR (0x14) -#define UART_R_INTEN (0x18) -#define UART_R_ISR (0x1c) - -#define UARTEN (0x01) /* UART enable */ -#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ - -#define RxEmpty (0x10) -#define TxEmpty (0x80) -#define TxFull (0x20) -#define nRxRdy RxEmpty -#define nTxRdy TxFull -#define TxBusy (0x08) - -#define RxBreak (0x0800) -#define RxOverrunError (0x0400) -#define RxParityError (0x0200) -#define RxFramingError (0x0100) -#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) - -#define DCD (0x04) -#define DSR (0x02) -#define CTS (0x01) - -#define RxInt (0x01) -#define TxInt (0x02) -#define ModemInt (0x04) -#define RxTimeoutInt (0x08) - -#define MSEOI (0x10) - -#define WLEN_8 (0x60) -#define WLEN_7 (0x40) -#define WLEN_6 (0x20) -#define WLEN_5 (0x00) -#define WLEN (0x60) /* Mask for all word-length bits */ -#define STP2 (0x08) -#define PEN (0x02) /* Parity Enable */ -#define EPS (0x04) /* Even Parity Set */ -#define FEN (0x10) /* FIFO Enable */ -#define BRK (0x01) /* Send Break */ - - -struct uart_port_lh7a40x { - struct uart_port port; - unsigned int statusPrev; /* Most recently read modem status */ -}; - -static void lh7a40xuart_stop_tx (struct uart_port* port) -{ - BIT_CLR (port, UART_R_INTEN, TxInt); -} - -static void lh7a40xuart_start_tx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, TxInt); - - /* *** FIXME: do I need to check for startup of the - transmitter? The old driver did, but AMBA - doesn't . */ -} - -static void lh7a40xuart_stop_rx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); -} - -static void lh7a40xuart_enable_ms (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, ModemInt); -} - -static void lh7a40xuart_rx_chars (struct uart_port* port) -{ - struct tty_struct* tty = port->state->port.tty; - int cbRxMax = 256; /* (Gross) limit on receive */ - unsigned int data; /* Received data and status */ - unsigned int flag; - - while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { - data = UR (port, UART_R_DATA); - flag = TTY_NORMAL; - ++port->icount.rx; - - if (unlikely(data & RxError)) { - if (data & RxBreak) { - data &= ~(RxFramingError | RxParityError); - ++port->icount.brk; - if (uart_handle_break (port)) - continue; - } - else if (data & RxParityError) - ++port->icount.parity; - else if (data & RxFramingError) - ++port->icount.frame; - if (data & RxOverrunError) - ++port->icount.overrun; - - /* Mask by termios, leave Rx'd byte */ - data &= port->read_status_mask | 0xff; - - if (data & RxBreak) - flag = TTY_BREAK; - else if (data & RxParityError) - flag = TTY_PARITY; - else if (data & RxFramingError) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char (port, (unsigned char) data)) - continue; - - uart_insert_char(port, data, RxOverrunError, data, flag); - } - tty_flip_buffer_push (tty); - return; -} - -static void lh7a40xuart_tx_chars (struct uart_port* port) -{ - struct circ_buf* xmit = &port->state->xmit; - int cbTxMax = port->fifosize; - - if (port->x_char) { - UR (port, UART_R_DATA) = port->x_char; - ++port->icount.tx; - port->x_char = 0; - return; - } - if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { - lh7a40xuart_stop_tx (port); - return; - } - - /* Unlike the AMBA UART, the lh7a40x UART does not guarantee - that at least half of the FIFO is empty. Instead, we check - status for every character. Using the AMBA method causes - the transmitter to drop characters. */ - - do { - UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - ++port->icount.tx; - if (uart_circ_empty(xmit)) - break; - } while (!(UR (port, UART_R_STATUS) & nTxRdy) - && cbTxMax--); - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - - if (uart_circ_empty (xmit)) - lh7a40xuart_stop_tx (port); -} - -static void lh7a40xuart_modem_status (struct uart_port* port) -{ - unsigned int status = UR (port, UART_R_STATUS); - unsigned int delta - = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; - - BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ - - if (!delta) /* Only happens if we missed 2 transitions */ - return; - - ((struct uart_port_lh7a40x*) port)->statusPrev = status; - - if (delta & DCD) - uart_handle_dcd_change (port, status & DCD); - - if (delta & DSR) - ++port->icount.dsr; - - if (delta & CTS) - uart_handle_cts_change (port, status & CTS); - - wake_up_interruptible (&port->state->port.delta_msr_wait); -} - -static irqreturn_t lh7a40xuart_int (int irq, void* dev_id) -{ - struct uart_port* port = dev_id; - unsigned int cLoopLimit = ISR_LOOP_LIMIT; - unsigned int isr = UR (port, UART_R_ISR); - - - do { - if (isr & (RxInt | RxTimeoutInt)) - lh7a40xuart_rx_chars(port); - if (isr & ModemInt) - lh7a40xuart_modem_status (port); - if (isr & TxInt) - lh7a40xuart_tx_chars (port); - - if (--cLoopLimit == 0) - break; - - isr = UR (port, UART_R_ISR); - } while (isr & (RxInt | TxInt | RxTimeoutInt)); - - return IRQ_HANDLED; -} - -static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) -{ - return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; -} - -static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) -{ - unsigned int result = 0; - unsigned int status = UR (port, UART_R_STATUS); - - if (status & DCD) - result |= TIOCM_CAR; - if (status & DSR) - result |= TIOCM_DSR; - if (status & CTS) - result |= TIOCM_CTS; - - return result; -} - -static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) -{ - /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ - /* Note, kernel appears to be setting DTR and RTS on console. */ - - /* *** FIXME: this deserves more work. There's some work in - tracing all of the IO pins. */ -#if 0 - if( port->mapbase == UART1_PHYS) { - gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); - - if (mctrl & TIOCM_RTS) - gpio->pbdr &= ~GPIOB_UART1_RTS; - else - gpio->pbdr |= GPIOB_UART1_RTS; - } -#endif -} - -static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ - else - BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ - spin_unlock_irqrestore(&port->lock, flags); -} - -static int lh7a40xuart_startup (struct uart_port* port) -{ - int retval; - - retval = request_irq (port->irq, lh7a40xuart_int, 0, - "serial_lh7a40x", port); - if (retval) - return retval; - - /* Initial modem control-line settings */ - ((struct uart_port_lh7a40x*) port)->statusPrev - = UR (port, UART_R_STATUS); - - /* There is presently no configuration option to enable IR. - Thus, we always disable it. */ - - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); - - return 0; -} - -static void lh7a40xuart_shutdown (struct uart_port* port) -{ - free_irq (port->irq, port); - BIT_CLR (port, UART_R_FCON, BRK | FEN); - BIT_CLR (port, UART_R_CON, UARTEN); -} - -static void lh7a40xuart_set_termios (struct uart_port* port, - struct ktermios* termios, - struct ktermios* old) -{ - unsigned int con; - unsigned int inten; - unsigned int fcon; - unsigned long flags; - unsigned int baud; - unsigned int quot; - - baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); - quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ - - switch (termios->c_cflag & CSIZE) { - case CS5: - fcon = WLEN_5; - break; - case CS6: - fcon = WLEN_6; - break; - case CS7: - fcon = WLEN_7; - break; - case CS8: - default: - fcon = WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - fcon |= STP2; - if (termios->c_cflag & PARENB) { - fcon |= PEN; - if (!(termios->c_cflag & PARODD)) - fcon |= EPS; - } - if (port->fifosize > 1) - fcon |= FEN; - - spin_lock_irqsave (&port->lock, flags); - - uart_update_timeout (port, termios->c_cflag, baud); - - port->read_status_mask = RxOverrunError; - if (termios->c_iflag & INPCK) - port->read_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= RxBreak; - - /* Figure mask for status we ignore */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= RxBreak; - /* Ignore overrun when ignorning parity */ - /* *** FIXME: is this in the right place? */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxOverrunError; - } - - /* Ignore all receive errors when receive disabled */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RxError; - - con = UR (port, UART_R_CON); - inten = (UR (port, UART_R_INTEN) & ~ModemInt); - - if (UART_ENABLE_MS (port, termios->c_cflag)) - inten |= ModemInt; - - BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ - UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ - UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ - UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ - UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ - UR (port, UART_R_CON) = con; /* Restore UART mode */ - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char* lh7a40xuart_type (struct uart_port* port) -{ - return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; -} - -static void lh7a40xuart_release_port (struct uart_port* port) -{ - release_mem_region (port->mapbase, UART_REG_SIZE); -} - -static int lh7a40xuart_request_port (struct uart_port* port) -{ - return request_mem_region (port->mapbase, UART_REG_SIZE, - "serial_lh7a40x") != NULL - ? 0 : -EBUSY; -} - -static void lh7a40xuart_config_port (struct uart_port* port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_LH7A40X; - lh7a40xuart_request_port (port); - } -} - -static int lh7a40xuart_verify_port (struct uart_port* port, - struct serial_struct* ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) /* *** FIXME: is this true? */ - ret = -EINVAL; - return ret; -} - -static struct uart_ops lh7a40x_uart_ops = { - .tx_empty = lh7a40xuart_tx_empty, - .set_mctrl = lh7a40xuart_set_mctrl, - .get_mctrl = lh7a40xuart_get_mctrl, - .stop_tx = lh7a40xuart_stop_tx, - .start_tx = lh7a40xuart_start_tx, - .stop_rx = lh7a40xuart_stop_rx, - .enable_ms = lh7a40xuart_enable_ms, - .break_ctl = lh7a40xuart_break_ctl, - .startup = lh7a40xuart_startup, - .shutdown = lh7a40xuart_shutdown, - .set_termios = lh7a40xuart_set_termios, - .type = lh7a40xuart_type, - .release_port = lh7a40xuart_release_port, - .request_port = lh7a40xuart_request_port, - .config_port = lh7a40xuart_config_port, - .verify_port = lh7a40xuart_verify_port, -}; - -static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { - { - .port = { - .membase = (void*) io_p2v (UART1_PHYS), - .mapbase = UART1_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART1INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART2_PHYS), - .mapbase = UART2_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART2INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART3_PHYS), - .mapbase = UART3_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART3INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - }, - }, -}; - -#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE -# define LH7A40X_CONSOLE NULL -#else -# define LH7A40X_CONSOLE &lh7a40x_console - -static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) -{ - while (UR(port, UART_R_STATUS) & nTxRdy) - ; - UR(port, UART_R_DATA) = ch; -} - -static void lh7a40xuart_console_write (struct console* co, - const char* s, - unsigned int count) -{ - struct uart_port* port = &lh7a40x_ports[co->index].port; - unsigned int con = UR (port, UART_R_CON); - unsigned int inten = UR (port, UART_R_INTEN); - - - UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ - - uart_console_write(port, s, count, lh7a40xuart_console_putchar); - - /* Wait until all characters are sent */ - while (UR (port, UART_R_STATUS) & TxBusy) - ; - - /* Restore control and interrupt mask */ - UR (port, UART_R_CON) = con; - UR (port, UART_R_INTEN) = inten; -} - -static void __init lh7a40xuart_console_get_options (struct uart_port* port, - int* baud, - int* parity, - int* bits) -{ - if (UR (port, UART_R_CON) & UARTEN) { - unsigned int fcon = UR (port, UART_R_FCON); - unsigned int quot = UR (port, UART_R_BRCON) + 1; - - switch (fcon & (PEN | EPS)) { - default: *parity = 'n'; break; - case PEN: *parity = 'o'; break; - case PEN | EPS: *parity = 'e'; break; - } - - switch (fcon & WLEN) { - default: - case WLEN_8: *bits = 8; break; - case WLEN_7: *bits = 7; break; - case WLEN_6: *bits = 6; break; - case WLEN_5: *bits = 5; break; - } - - *baud = port->uartclk/(16*quot); - } -} - -static int __init lh7a40xuart_console_setup (struct console* co, char* options) -{ - struct uart_port* port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index >= DEV_NR) /* Bounds check on device number */ - co->index = 0; - port = &lh7a40x_ports[co->index].port; - - if (options) - uart_parse_options (options, &baud, &parity, &bits, &flow); - else - lh7a40xuart_console_get_options (port, &baud, &parity, &bits); - - return uart_set_options (port, co, baud, parity, bits, flow); -} - -static struct uart_driver lh7a40x_reg; -static struct console lh7a40x_console = { - .name = "ttyAM", - .write = lh7a40xuart_console_write, - .device = uart_console_device, - .setup = lh7a40xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &lh7a40x_reg, -}; - -static int __init lh7a40xuart_console_init(void) -{ - register_console (&lh7a40x_console); - return 0; -} - -console_initcall (lh7a40xuart_console_init); - -#endif - -static struct uart_driver lh7a40x_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAM", - .dev_name = "ttyAM", - .major = DEV_MAJOR, - .minor = DEV_MINOR, - .nr = DEV_NR, - .cons = LH7A40X_CONSOLE, -}; - -static int __init lh7a40xuart_init(void) -{ - int ret; - - printk (KERN_INFO "serial: LH7A40X serial driver\n"); - - ret = uart_register_driver (&lh7a40x_reg); - - if (ret == 0) { - int i; - - for (i = 0; i < DEV_NR; i++) { - /* UART3, when used, requires GPIO pin reallocation */ - if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) - GPIO_PINMUX |= 1<<3; - uart_add_one_port (&lh7a40x_reg, - &lh7a40x_ports[i].port); - } - } - return ret; -} - -static void __exit lh7a40xuart_exit(void) -{ - int i; - - for (i = 0; i < DEV_NR; i++) - uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); - - uart_unregister_driver (&lh7a40x_reg); -} - -module_init (lh7a40xuart_init); -module_exit (lh7a40xuart_exit); - -MODULE_AUTHOR ("Marc Singer"); -MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); -MODULE_LICENSE ("GPL"); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c deleted file mode 100644 index c50e9fb..0000000 --- a/drivers/serial/serial_txx9.c +++ /dev/null @@ -1,1344 +0,0 @@ -/* - * drivers/serial/serial_txx9.c - * - * Derived from many drivers using generic_serial interface, - * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c - * (was in Linux/VR tree) by Jim Pick. - * - * Copyright (C) 1999 Harald Koerfgen - * Copyright (C) 2000 Jim Pick - * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) - * Copyright (C) 2000-2002 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller - */ - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static char *serial_version = "1.11"; -static char *serial_name = "TX39/49 Serial driver"; - -#define PASS_LIMIT 256 - -#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) -/* "ttyS" is used for standard serial driver */ -#define TXX9_TTY_NAME "ttyTX" -#define TXX9_TTY_MINOR_START 196 -#define TXX9_TTY_MAJOR 204 -#else -/* acts like standard serial driver */ -#define TXX9_TTY_NAME "ttyS" -#define TXX9_TTY_MINOR_START 64 -#define TXX9_TTY_MAJOR TTY_MAJOR -#endif - -/* flag aliases */ -#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART -#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER - -#ifdef CONFIG_PCI -/* support for Toshiba TC86C001 SIO */ -#define ENABLE_SERIAL_TXX9_PCI -#endif - -/* - * Number of serial ports - */ -#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS - -struct uart_txx9_port { - struct uart_port port; - /* No additional info for now */ -}; - -#define TXX9_REGION_SIZE 0x24 - -/* TXX9 Serial Registers */ -#define TXX9_SILCR 0x00 -#define TXX9_SIDICR 0x04 -#define TXX9_SIDISR 0x08 -#define TXX9_SICISR 0x0c -#define TXX9_SIFCR 0x10 -#define TXX9_SIFLCR 0x14 -#define TXX9_SIBGR 0x18 -#define TXX9_SITFIFO 0x1c -#define TXX9_SIRFIFO 0x20 - -/* SILCR : Line Control */ -#define TXX9_SILCR_SCS_MASK 0x00000060 -#define TXX9_SILCR_SCS_IMCLK 0x00000000 -#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXX9_SILCR_SCS_SCLK 0x00000040 -#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 -#define TXX9_SILCR_UEPS 0x00000010 -#define TXX9_SILCR_UPEN 0x00000008 -#define TXX9_SILCR_USBL_MASK 0x00000004 -#define TXX9_SILCR_USBL_1BIT 0x00000000 -#define TXX9_SILCR_USBL_2BIT 0x00000004 -#define TXX9_SILCR_UMODE_MASK 0x00000003 -#define TXX9_SILCR_UMODE_8BIT 0x00000000 -#define TXX9_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXX9_SIDICR_TDE 0x00008000 -#define TXX9_SIDICR_RDE 0x00004000 -#define TXX9_SIDICR_TIE 0x00002000 -#define TXX9_SIDICR_RIE 0x00001000 -#define TXX9_SIDICR_SPIE 0x00000800 -#define TXX9_SIDICR_CTSAC 0x00000600 -#define TXX9_SIDICR_STIE_MASK 0x0000003f -#define TXX9_SIDICR_STIE_OERS 0x00000020 -#define TXX9_SIDICR_STIE_CTSS 0x00000010 -#define TXX9_SIDICR_STIE_RBRKD 0x00000008 -#define TXX9_SIDICR_STIE_TRDY 0x00000004 -#define TXX9_SIDICR_STIE_TXALS 0x00000002 -#define TXX9_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXX9_SIDISR_UBRK 0x00008000 -#define TXX9_SIDISR_UVALID 0x00004000 -#define TXX9_SIDISR_UFER 0x00002000 -#define TXX9_SIDISR_UPER 0x00001000 -#define TXX9_SIDISR_UOER 0x00000800 -#define TXX9_SIDISR_ERI 0x00000400 -#define TXX9_SIDISR_TOUT 0x00000200 -#define TXX9_SIDISR_TDIS 0x00000100 -#define TXX9_SIDISR_RDIS 0x00000080 -#define TXX9_SIDISR_STIS 0x00000040 -#define TXX9_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXX9_SICISR_OERS 0x00000020 -#define TXX9_SICISR_CTSS 0x00000010 -#define TXX9_SICISR_RBRKD 0x00000008 -#define TXX9_SICISR_TRDY 0x00000004 -#define TXX9_SICISR_TXALS 0x00000002 -#define TXX9_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXX9_SIFCR_SWRST 0x00008000 -#define TXX9_SIFCR_RDIL_MASK 0x00000180 -#define TXX9_SIFCR_RDIL_1 0x00000000 -#define TXX9_SIFCR_RDIL_4 0x00000080 -#define TXX9_SIFCR_RDIL_8 0x00000100 -#define TXX9_SIFCR_RDIL_12 0x00000180 -#define TXX9_SIFCR_RDIL_MAX 0x00000180 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_1 0x00000000 -#define TXX9_SIFCR_TDIL_4 0x00000001 -#define TXX9_SIFCR_TDIL_8 0x00000010 -#define TXX9_SIFCR_TDIL_MAX 0x00000010 -#define TXX9_SIFCR_TFRST 0x00000004 -#define TXX9_SIFCR_RFRST 0x00000002 -#define TXX9_SIFCR_FRSTE 0x00000001 -#define TXX9_SIO_TX_FIFO 8 -#define TXX9_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXX9_SIFLCR_RCS 0x00001000 -#define TXX9_SIFLCR_TES 0x00000800 -#define TXX9_SIFLCR_RTSSC 0x00000200 -#define TXX9_SIFLCR_RSDE 0x00000100 -#define TXX9_SIFLCR_TSDE 0x00000080 -#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e -#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e -#define TXX9_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXX9_SIBGR_BCLK_MASK 0x00000300 -#define TXX9_SIBGR_BCLK_T0 0x00000000 -#define TXX9_SIBGR_BCLK_T2 0x00000100 -#define TXX9_SIBGR_BCLK_T4 0x00000200 -#define TXX9_SIBGR_BCLK_T6 0x00000300 -#define TXX9_SIBGR_BRD_MASK 0x000000ff - -static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) -{ - switch (up->port.iotype) { - default: - return __raw_readl(up->port.membase + offset); - case UPIO_PORT: - return inl(up->port.iobase + offset); - } -} - -static inline void -sio_out(struct uart_txx9_port *up, int offset, int value) -{ - switch (up->port.iotype) { - default: - __raw_writel(value, up->port.membase + offset); - break; - case UPIO_PORT: - outl(value, up->port.iobase + offset); - break; - } -} - -static inline void -sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) & ~value); -} -static inline void -sio_set(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) | value); -} - -static inline void -sio_quot_set(struct uart_txx9_port *up, int quot) -{ - quot >>= 1; - if (quot < 256) - sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); - else if (quot < (256 << 2)) - sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); - else if (quot < (256 << 4)) - sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); - else if (quot < (256 << 6)) - sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); - else - sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); -} - -static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) -{ - return container_of(port, struct uart_txx9_port, port); -} - -static void serial_txx9_stop_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_start_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_stop_rx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; -} - -static void serial_txx9_enable_ms(struct uart_port *port) -{ - /* TXX9-SIO can not control DTR... */ -} - -static void serial_txx9_initialize(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int tmout = 10000; - - sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); - /* TX4925 BUG WORKAROUND. Accessing SIOC register - * immediately after soft reset causes bus error. */ - mmiowb(); - udelay(1); - while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) - udelay(1); - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); - /* initial settings */ - sio_out(up, TXX9_SILCR, - TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((up->port.flags & UPF_TXX9_USE_SCLK) ? - TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_quot_set(up, uart_get_divisor(port, 9600)); - sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); - sio_out(up, TXX9_SIDICR, 0); -} - -static inline void -receive_chars(struct uart_txx9_port *up, unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned int disr = *status; - int max_count = 256; - char flag; - unsigned int next_ignore_status_mask; - - do { - ch = sio_in(up, TXX9_SIRFIFO); - flag = TTY_NORMAL; - up->port.icount.rx++; - - /* mask out RFDN_MASK bit added by previous overrun */ - next_ignore_status_mask = - up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; - if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | - TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { - /* - * For statistics only - */ - if (disr & TXX9_SIDISR_UBRK) { - disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (disr & TXX9_SIDISR_UPER) - up->port.icount.parity++; - else if (disr & TXX9_SIDISR_UFER) - up->port.icount.frame++; - if (disr & TXX9_SIDISR_UOER) { - up->port.icount.overrun++; - /* - * The receiver read buffer still hold - * a char which caused overrun. - * Ignore next char by adding RFDN_MASK - * to ignore_status_mask temporarily. - */ - next_ignore_status_mask |= - TXX9_SIDISR_RFDN_MASK; - } - - /* - * Mask off conditions which should be ingored. - */ - disr &= up->port.read_status_mask; - - if (disr & TXX9_SIDISR_UBRK) { - flag = TTY_BREAK; - } else if (disr & TXX9_SIDISR_UPER) - flag = TTY_PARITY; - else if (disr & TXX9_SIDISR_UFER) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); - - ignore_char: - up->port.ignore_status_mask = next_ignore_status_mask; - disr = sio_in(up, TXX9_SIDISR); - } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); - *status = disr; -} - -static inline void transmit_chars(struct uart_txx9_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - sio_out(up, TXX9_SITFIFO, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_txx9_stop_tx(&up->port); - return; - } - - count = TXX9_SIO_TX_FIFO; - do { - sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_txx9_stop_tx(&up->port); -} - -static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) -{ - int pass_counter = 0; - struct uart_txx9_port *up = dev_id; - unsigned int status; - - while (1) { - spin_lock(&up->port.lock); - status = sio_in(up, TXX9_SIDISR); - if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) - status &= ~TXX9_SIDISR_TDIS; - if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT))) { - spin_unlock(&up->port.lock); - break; - } - - if (status & TXX9_SIDISR_RDIS) - receive_chars(up, &status); - if (status & TXX9_SIDISR_TDIS) - transmit_chars(up); - /* Clear TX/RX Int. Status */ - sio_mask(up, TXX9_SIDISR, - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT); - spin_unlock(&up->port.lock); - - if (pass_counter++ > PASS_LIMIT) - break; - } - - return pass_counter ? IRQ_HANDLED : IRQ_NONE; -} - -static unsigned int serial_txx9_tx_empty(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_txx9_get_mctrl(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int ret; - - /* no modem control lines */ - ret = TIOCM_CAR | TIOCM_DSR; - ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; - ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; - - return ret; -} - -static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - if (mctrl & TIOCM_RTS) - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); - else - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); -} - -static void serial_txx9_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - else - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_txx9_port *up) -{ - unsigned int tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - while (--tmout && - !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) - udelay(1); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) - udelay(1); - } -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int serial_txx9_get_poll_char(struct uart_port *port) -{ - unsigned int ier; - unsigned char c; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) - ; - - c = sio_in(up, TXX9_SIRFIFO); - - /* - * Finally, clear RX interrupt status - * and restore the IER - */ - sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); - sio_out(up, TXX9_SIDICR, ier); - return c; -} - - -static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) -{ - unsigned int ier; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - wait_for_xmitr(up); - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, TXX9_SITFIFO, c); - if (c == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIDICR, ier); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int serial_txx9_startup(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - int retval; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - sio_out(up, TXX9_SIDICR, 0); - - /* - * Clear the interrupt registers. - */ - sio_out(up, TXX9_SIDISR, 0); - - retval = request_irq(up->port.irq, serial_txx9_interrupt, - IRQF_SHARED, "serial_txx9", up); - if (retval) - return retval; - - /* - * Now, initialize the UART - */ - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Enable RX/TX */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - /* - * Finally, enable interrupts. - */ - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); - - return 0; -} - -static void serial_txx9_shutdown(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - /* - * Disable interrupts from this port - */ - sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ - - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition - */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.cons && up->port.line == up->port.cons->index) { - free_irq(up->port.irq, up); - return; - } -#endif - /* reset FIFOs */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - - /* Disable RX/TX */ - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - free_irq(up->port.irq, up); -} - -static void -serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CMSPAR); - termios->c_cflag |= CLOCAL; - - cval = sio_in(up, TXX9_SILCR); - /* byte size and parity */ - cval &= ~TXX9_SILCR_UMODE_MASK; - switch (termios->c_cflag & CSIZE) { - case CS7: - cval |= TXX9_SILCR_UMODE_7BIT; - break; - default: - case CS5: /* not supported */ - case CS6: /* not supported */ - case CS8: - cval |= TXX9_SILCR_UMODE_8BIT; - break; - } - - cval &= ~TXX9_SILCR_USBL_MASK; - if (termios->c_cflag & CSTOPB) - cval |= TXX9_SILCR_USBL_2BIT; - else - cval |= TXX9_SILCR_USBL_1BIT; - cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); - if (termios->c_cflag & PARENB) - cval |= TXX9_SILCR_UPEN; - if (!(termios->c_cflag & PARODD)) - cval |= TXX9_SILCR_UEPS; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); - quot = uart_get_divisor(port, baud); - - /* Set up FIFOs */ - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = TXX9_SIDISR_UOER | - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= TXX9_SIDISR_UBRK; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UOER; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; - - /* CTS flow control flag */ - if ((termios->c_cflag & CRTSCTS) && - (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { - sio_set(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } else { - sio_mask(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } - - sio_out(up, TXX9_SILCR, cval); - sio_quot_set(up, quot); - sio_out(up, TXX9_SIFCR, fcr); - - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_txx9_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - /* - * If oldstate was -1 this is called from - * uart_configure_port(). In this case do not initialize the - * port now, because the port was already initialized (for - * non-console port) or should not be initialized here (for - * console port). If we initialized the port here we lose - * serial console settings. - */ - if (state == 0 && oldstate != -1) - serial_txx9_initialize(port); -} - -static int serial_txx9_request_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - int ret = 0; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { - ret = -EBUSY; - break; - } - - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); - ret = -ENOMEM; - } - } - break; - - case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial_txx9")) - ret = -EBUSY; - break; - } - return ret; -} - -static void serial_txx9_release_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; - } - - release_mem_region(up->port.mapbase, size); - break; - - case UPIO_PORT: - release_region(up->port.iobase, size); - break; - } -} - -static void serial_txx9_release_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - serial_txx9_release_resource(up); -} - -static int serial_txx9_request_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - return serial_txx9_request_resource(up); -} - -static void serial_txx9_config_port(struct uart_port *port, int uflags) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - int ret; - - /* - * Find the region that we can probe for. This in turn - * tells us whether we can probe for the type of port. - */ - ret = serial_txx9_request_resource(up); - if (ret < 0) - return; - port->type = PORT_TXX9; - up->port.fifosize = TXX9_SIO_TX_FIFO; - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.line == up->port.cons->index) - return; -#endif - serial_txx9_initialize(port); -} - -static const char * -serial_txx9_type(struct uart_port *port) -{ - return "txx9"; -} - -static struct uart_ops serial_txx9_pops = { - .tx_empty = serial_txx9_tx_empty, - .set_mctrl = serial_txx9_set_mctrl, - .get_mctrl = serial_txx9_get_mctrl, - .stop_tx = serial_txx9_stop_tx, - .start_tx = serial_txx9_start_tx, - .stop_rx = serial_txx9_stop_rx, - .enable_ms = serial_txx9_enable_ms, - .break_ctl = serial_txx9_break_ctl, - .startup = serial_txx9_startup, - .shutdown = serial_txx9_shutdown, - .set_termios = serial_txx9_set_termios, - .pm = serial_txx9_pm, - .type = serial_txx9_type, - .release_port = serial_txx9_release_port, - .request_port = serial_txx9_request_port, - .config_port = serial_txx9_config_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = serial_txx9_get_poll_char, - .poll_put_char = serial_txx9_put_poll_char, -#endif -}; - -static struct uart_txx9_port serial_txx9_ports[UART_NR]; - -static void __init serial_txx9_register_ports(struct uart_driver *drv, - struct device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - up->port.line = i; - up->port.ops = &serial_txx9_pops; - up->port.dev = dev; - if (up->port.iobase || up->port.mapbase) - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - -static void serial_txx9_console_putchar(struct uart_port *port, int ch) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_txx9_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_txx9_port *up = &serial_txx9_ports[co->index]; - unsigned int ier, flcr; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - /* - * Disable flow-control if enabled (and unnecessary) - */ - flcr = sio_in(up, TXX9_SIFLCR); - if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) - sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - - uart_console_write(&up->port, s, count, serial_txx9_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIFLCR, flcr); - sio_out(up, TXX9_SIDICR, ier); -} - -static int __init serial_txx9_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - struct uart_txx9_port *up; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - up = &serial_txx9_ports[co->index]; - port = &up->port; - if (!port->ops) - return -ENODEV; - - serial_txx9_initialize(&up->port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver serial_txx9_reg; -static struct console serial_txx9_console = { - .name = TXX9_TTY_NAME, - .write = serial_txx9_console_write, - .device = uart_console_device, - .setup = serial_txx9_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_txx9_reg, -}; - -static int __init serial_txx9_console_init(void) -{ - register_console(&serial_txx9_console); - return 0; -} -console_initcall(serial_txx9_console_init); - -#define SERIAL_TXX9_CONSOLE &serial_txx9_console -#else -#define SERIAL_TXX9_CONSOLE NULL -#endif - -static struct uart_driver serial_txx9_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_txx9", - .dev_name = TXX9_TTY_NAME, - .major = TXX9_TTY_MAJOR, - .minor = TXX9_TTY_MINOR_START, - .nr = UART_NR, - .cons = SERIAL_TXX9_CONSOLE, -}; - -int __init early_serial_txx9_setup(struct uart_port *port) -{ - if (port->line >= ARRAY_SIZE(serial_txx9_ports)) - return -ENODEV; - - serial_txx9_ports[port->line].port = *port; - serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; - serial_txx9_ports[port->line].port.flags |= - UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - return 0; -} - -static DEFINE_MUTEX(serial_txx9_mutex); - -/** - * serial_txx9_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -static int __devinit serial_txx9_register_port(struct uart_port *port) -{ - int i; - struct uart_txx9_port *uart; - int ret = -ENOSPC; - - mutex_lock(&serial_txx9_mutex); - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (uart_match_port(&uart->port, port)) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); - break; - } - } - if (i == UART_NR) { - /* Find unused port */ - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (!(uart->port.iobase || uart->port.mapbase)) - break; - } - } - if (i < UART_NR) { - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.uartclk = port->uartclk; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags - | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - uart->port.mapbase = port->mapbase; - if (port->dev) - uart->port.dev = port->dev; - ret = uart_add_one_port(&serial_txx9_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; - } - mutex_unlock(&serial_txx9_mutex); - return ret; -} - -/** - * serial_txx9_unregister_port - remove a txx9 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to the our control. - */ -static void __devexit serial_txx9_unregister_port(int line) -{ - struct uart_txx9_port *uart = &serial_txx9_ports[line]; - - mutex_lock(&serial_txx9_mutex); - uart_remove_one_port(&serial_txx9_reg, &uart->port); - uart->port.flags = 0; - uart->port.type = PORT_UNKNOWN; - uart->port.iobase = 0; - uart->port.mapbase = 0; - uart->port.membase = NULL; - uart->port.dev = NULL; - mutex_unlock(&serial_txx9_mutex); -} - -/* - * Register a set of serial devices attached to a platform device. - */ -static int __devinit serial_txx9_probe(struct platform_device *dev) -{ - struct uart_port *p = dev->dev.platform_data; - struct uart_port port; - int ret, i; - - memset(&port, 0, sizeof(struct uart_port)); - for (i = 0; p && p->uartclk != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.uartclk = p->uartclk; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.dev = &dev->dev; - ret = serial_txx9_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static int __devexit serial_txx9_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.dev == &dev->dev) - serial_txx9_unregister_port(i); - } - return 0; -} - -#ifdef CONFIG_PM -static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial_txx9_reg, &up->port); - } - - return 0; -} - -static int serial_txx9_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_resume_port(&serial_txx9_reg, &up->port); - } - - return 0; -} -#endif - -static struct platform_driver serial_txx9_plat_driver = { - .probe = serial_txx9_probe, - .remove = __devexit_p(serial_txx9_remove), -#ifdef CONFIG_PM - .suspend = serial_txx9_suspend, - .resume = serial_txx9_resume, -#endif - .driver = { - .name = "serial_txx9", - .owner = THIS_MODULE, - }, -}; - -#ifdef ENABLE_SERIAL_TXX9_PCI -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct uart_port port; - int line; - int rc; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - memset(&port, 0, sizeof(port)); - port.ops = &serial_txx9_pops; - port.flags |= UPF_TXX9_HAVE_CTS_LINE; - port.uartclk = 66670000; - port.irq = dev->irq; - port.iotype = UPIO_PORT; - port.iobase = pci_resource_start(dev, 1); - port.dev = &dev->dev; - line = serial_txx9_register_port(&port); - if (line < 0) { - printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); - pci_disable_device(dev); - return line; - } - pci_set_drvdata(dev, &serial_txx9_ports[line]); - - return 0; -} - -static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_drvdata(dev, NULL); - - if (up) { - serial_txx9_unregister_port(up->port.line); - pci_disable_device(dev); - } -} - -#ifdef CONFIG_PM -static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - if (up) - uart_suspend_port(&serial_txx9_reg, &up->port); - pci_save_state(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int pciserial_txx9_resume_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - if (up) - uart_resume_port(&serial_txx9_reg, &up->port); - return 0; -} -#endif - -static const struct pci_device_id serial_txx9_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, - { 0, } -}; - -static struct pci_driver serial_txx9_pci_driver = { - .name = "serial_txx9", - .probe = pciserial_txx9_init_one, - .remove = __devexit_p(pciserial_txx9_remove_one), -#ifdef CONFIG_PM - .suspend = pciserial_txx9_suspend_one, - .resume = pciserial_txx9_resume_one, -#endif - .id_table = serial_txx9_pci_tbl, -}; - -MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); -#endif /* ENABLE_SERIAL_TXX9_PCI */ - -static struct platform_device *serial_txx9_plat_devs; - -static int __init serial_txx9_init(void) -{ - int ret; - - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); - - ret = uart_register_driver(&serial_txx9_reg); - if (ret) - goto out; - - serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); - if (!serial_txx9_plat_devs) { - ret = -ENOMEM; - goto unreg_uart_drv; - } - - ret = platform_device_add(serial_txx9_plat_devs); - if (ret) - goto put_dev; - - serial_txx9_register_ports(&serial_txx9_reg, - &serial_txx9_plat_devs->dev); - - ret = platform_driver_register(&serial_txx9_plat_driver); - if (ret) - goto del_dev; - -#ifdef ENABLE_SERIAL_TXX9_PCI - ret = pci_register_driver(&serial_txx9_pci_driver); -#endif - if (ret == 0) - goto out; - - del_dev: - platform_device_del(serial_txx9_plat_devs); - put_dev: - platform_device_put(serial_txx9_plat_devs); - unreg_uart_drv: - uart_unregister_driver(&serial_txx9_reg); - out: - return ret; -} - -static void __exit serial_txx9_exit(void) -{ - int i; - -#ifdef ENABLE_SERIAL_TXX9_PCI - pci_unregister_driver(&serial_txx9_pci_driver); -#endif - platform_driver_unregister(&serial_txx9_plat_driver); - platform_device_unregister(serial_txx9_plat_devs); - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - if (up->port.iobase || up->port.mapbase) - uart_remove_one_port(&serial_txx9_reg, &up->port); - } - - uart_unregister_driver(&serial_txx9_reg); -} - -module_init(serial_txx9_init); -module_exit(serial_txx9_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("TX39/49 serial driver"); - -MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c deleted file mode 100644 index c291b3a..0000000 --- a/drivers/serial/sh-sci.c +++ /dev/null @@ -1,2027 +0,0 @@ -/* - * drivers/serial/sh-sci.c - * - * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) - * - * Copyright (C) 2002 - 2008 Paul Mundt - * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). - * - * based off of the old drivers/char/sh-sci.c by: - * - * Copyright (C) 1999, 2000 Niibe Yutaka - * Copyright (C) 2000 Sugioka Toshinobu - * Modified to support multiple serial ports. Stuart Menefy (May 2000). - * Modified to support SecureEdge. David McCullough (2002) - * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). - * Removed SH7300 support (Jul 2007). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_SUPERH -#include -#endif - -#ifdef CONFIG_H8300 -#include -#endif - -#include "sh-sci.h" - -struct sci_port { - struct uart_port port; - - /* Port type */ - unsigned int type; - - /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ - unsigned int irqs[SCIx_NR_IRQS]; - - /* Port enable callback */ - void (*enable)(struct uart_port *port); - - /* Port disable callback */ - void (*disable)(struct uart_port *port); - - /* Break timer */ - struct timer_list break_timer; - int break_flag; - - /* Interface clock */ - struct clk *iclk; - /* Function clock */ - struct clk *fclk; - - struct list_head node; - struct dma_chan *chan_tx; - struct dma_chan *chan_rx; -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct device *dma_dev; - unsigned int slave_tx; - unsigned int slave_rx; - struct dma_async_tx_descriptor *desc_tx; - struct dma_async_tx_descriptor *desc_rx[2]; - dma_cookie_t cookie_tx; - dma_cookie_t cookie_rx[2]; - dma_cookie_t active_rx; - struct scatterlist sg_tx; - unsigned int sg_len_tx; - struct scatterlist sg_rx[2]; - size_t buf_len_rx; - struct sh_dmae_slave param_tx; - struct sh_dmae_slave param_rx; - struct work_struct work_tx; - struct work_struct work_rx; - struct timer_list rx_timer; - unsigned int rx_timeout; -#endif -}; - -struct sh_sci_priv { - spinlock_t lock; - struct list_head ports; - struct notifier_block clk_nb; -}; - -/* Function prototypes */ -static void sci_stop_tx(struct uart_port *port); - -#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS - -static struct sci_port sci_ports[SCI_NPORTS]; -static struct uart_driver sci_uart_driver; - -static inline struct sci_port * -to_sci_port(struct uart_port *uart) -{ - return container_of(uart, struct sci_port, port); -} - -#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) - -#ifdef CONFIG_CONSOLE_POLL -static inline void handle_error(struct uart_port *port) -{ - /* Clear error flags */ - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); -} - -static int sci_poll_get_char(struct uart_port *port) -{ - unsigned short status; - int c; - - do { - status = sci_in(port, SCxSR); - if (status & SCxSR_ERRORS(port)) { - handle_error(port); - continue; - } - break; - } while (1); - - if (!(status & SCxSR_RDxF(port))) - return NO_POLL_CHAR; - - c = sci_in(port, SCxRDR); - - /* Dummy read */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - - return c; -} -#endif - -static void sci_poll_put_char(struct uart_port *port, unsigned char c) -{ - unsigned short status; - - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TDxE(port))); - - sci_out(port, SCxTDR, c); - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); -} -#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ - -#if defined(__H8300H__) || defined(__H8300S__) -static void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - int ch = (port->mapbase - SMR0) >> 3; - - /* set DDR regs */ - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].rx, - H8300_GPIO_INPUT); - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].tx, - H8300_GPIO_OUTPUT); - - /* tx mark output*/ - H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (port->mapbase == 0xA4400000) { - __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); - __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); - } else if (port->mapbase == 0xA4410000) - __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (cflag & CRTSCTS) { - /* enable RTS/CTS */ - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 9-2; enable all scif pins but sck */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xfc03), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 9-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xfc03), PORT_PVCR); - } - } else { - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 5-2; enable only tx and rx */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xffc3), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 5-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xffc3), PORT_PVCR); - } - } -} -#elif defined(CONFIG_CPU_SH3) -/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ - __raw_writew(data & 0x0fcf, SCPCR); - - if (!(cflag & CRTSCTS)) { - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP4MD1,0, - Set SCP6MD1,0 = {01} (output) */ - __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - - data = __raw_readb(SCPDR); - /* Set /RTS2 (bit6) = 0 */ - __raw_writeb(data & 0xbf, SCPDR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (port->mapbase == 0xffe00000) { - data = __raw_readw(PSCR); - data &= ~0x03cf; - if (!(cflag & CRTSCTS)) - data |= 0x0340; - - __raw_writew(data, PSCR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ -} -#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ -} -#else -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - /* Nothing to do */ -} -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCTFDR) & 0xff; -} - -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCRFDR) & 0xff; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static int scif_txfill(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return sci_in(port, SCTFDR) & 0xff; - else - /* SCIF2 */ - return sci_in(port, SCFDR) >> 8; -} - -static int scif_txroom(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return SCIF_TXROOM_MAX - scif_txfill(port); - else - /* SCIF2 */ - return SCIF2_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { - /* SCIF0/1*/ - return sci_in(port, SCRFDR) & 0xff; - } else { - /* SCIF2 */ - return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; - } -} -#elif defined(CONFIG_ARCH_SH7372) -static int scif_txfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) >> 8; - else - return sci_in(port, SCTFDR); -} - -static int scif_txroom(struct uart_port *port) -{ - return port->fifosize - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; - else - return sci_in(port, SCRFDR); -} -#else -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) >> 8; -} - -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; -} -#endif - -static int sci_txfill(struct uart_port *port) -{ - return !(sci_in(port, SCxSR) & SCI_TDRE); -} - -static int sci_txroom(struct uart_port *port) -{ - return !sci_txfill(port); -} - -static int sci_rxfill(struct uart_port *port) -{ - return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; -} - -/* ********************************************************************** * - * the interrupt related routines * - * ********************************************************************** */ - -static void sci_transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - unsigned int stopped = uart_tx_stopped(port); - unsigned short status; - unsigned short ctrl; - int count; - - status = sci_in(port, SCxSR); - if (!(status & SCxSR_TDxE(port))) { - ctrl = sci_in(port, SCSCR); - if (uart_circ_empty(xmit)) - ctrl &= ~SCI_CTRL_FLAGS_TIE; - else - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); - return; - } - - if (port->type == PORT_SCI) - count = sci_txroom(port); - else - count = scif_txroom(port); - - do { - unsigned char c; - - if (port->x_char) { - c = port->x_char; - port->x_char = 0; - } else if (!uart_circ_empty(xmit) && !stopped) { - c = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else { - break; - } - - sci_out(port, SCxTDR, c); - - port->icount.tx++; - } while (--count > 0); - - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { - sci_stop_tx(port); - } else { - ctrl = sci_in(port, SCSCR); - - if (port->type != PORT_SCI) { - sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); - } - - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); - } -} - -/* On SH3, SCIF may read end-of-break as a space->mark char */ -#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) - -static inline void sci_receive_chars(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - struct tty_struct *tty = port->state->port.tty; - int i, count, copied = 0; - unsigned short status; - unsigned char flag; - - status = sci_in(port, SCxSR); - if (!(status & SCxSR_RDxF(port))) - return; - - while (1) { - if (port->type == PORT_SCI) - count = sci_rxfill(port); - else - count = scif_rxfill(port); - - /* Don't copy more bytes than there is room for in the buffer */ - count = tty_buffer_request_room(tty, count); - - /* If for any reason we can't copy more data, we're done! */ - if (count == 0) - break; - - if (port->type == PORT_SCI) { - char c = sci_in(port, SCxRDR); - if (uart_handle_sysrq_char(port, c) || - sci_port->break_flag) - count = 0; - else - tty_insert_flip_char(tty, c, TTY_NORMAL); - } else { - for (i = 0; i < count; i++) { - char c = sci_in(port, SCxRDR); - status = sci_in(port, SCxSR); -#if defined(CONFIG_CPU_SH3) - /* Skip "chars" during break */ - if (sci_port->break_flag) { - if ((c == 0) && - (status & SCxSR_FER(port))) { - count--; i--; - continue; - } - - /* Nonzero => end-of-break */ - dev_dbg(port->dev, "debounce<%02x>\n", c); - sci_port->break_flag = 0; - - if (STEPFN(c)) { - count--; i--; - continue; - } - } -#endif /* CONFIG_CPU_SH3 */ - if (uart_handle_sysrq_char(port, c)) { - count--; i--; - continue; - } - - /* Store data and status */ - if (status & SCxSR_FER(port)) { - flag = TTY_FRAME; - dev_notice(port->dev, "frame error\n"); - } else if (status & SCxSR_PER(port)) { - flag = TTY_PARITY; - dev_notice(port->dev, "parity error\n"); - } else - flag = TTY_NORMAL; - - tty_insert_flip_char(tty, c, flag); - } - } - - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - - copied += count; - port->icount.rx += count; - } - - if (copied) { - /* Tell the rest of the system the news. New characters! */ - tty_flip_buffer_push(tty); - } else { - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - } -} - -#define SCI_BREAK_JIFFIES (HZ/20) -/* The sci generates interrupts during the break, - * 1 per millisecond or so during the break period, for 9600 baud. - * So dont bother disabling interrupts. - * But dont want more than 1 break event. - * Use a kernel timer to periodically poll the rx line until - * the break is finished. - */ -static void sci_schedule_break_timer(struct sci_port *port) -{ - port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; - add_timer(&port->break_timer); -} -/* Ensure that two consecutive samples find the break over. */ -static void sci_break_timer(unsigned long data) -{ - struct sci_port *port = (struct sci_port *)data; - - if (sci_rxd_in(&port->port) == 0) { - port->break_flag = 1; - sci_schedule_break_timer(port); - } else if (port->break_flag == 1) { - /* break is over. */ - port->break_flag = 2; - sci_schedule_break_timer(port); - } else - port->break_flag = 0; -} - -static inline int sci_handle_errors(struct uart_port *port) -{ - int copied = 0; - unsigned short status = sci_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; - - if (status & SCxSR_ORER(port)) { - /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) - copied++; - - dev_notice(port->dev, "overrun error"); - } - - if (status & SCxSR_FER(port)) { - if (sci_rxd_in(port) == 0) { - /* Notify of BREAK */ - struct sci_port *sci_port = to_sci_port(port); - - if (!sci_port->break_flag) { - sci_port->break_flag = 1; - sci_schedule_break_timer(sci_port); - - /* Do sysrq handling. */ - if (uart_handle_break(port)) - return 0; - - dev_dbg(port->dev, "BREAK detected\n"); - - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) - copied++; - } - - } else { - /* frame error */ - if (tty_insert_flip_char(tty, 0, TTY_FRAME)) - copied++; - - dev_notice(port->dev, "frame error\n"); - } - } - - if (status & SCxSR_PER(port)) { - /* parity error */ - if (tty_insert_flip_char(tty, 0, TTY_PARITY)) - copied++; - - dev_notice(port->dev, "parity error"); - } - - if (copied) - tty_flip_buffer_push(tty); - - return copied; -} - -static inline int sci_handle_fifo_overrun(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - int copied = 0; - - if (port->type != PORT_SCIF) - return 0; - - if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { - sci_out(port, SCLSR, 0); - - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - tty_flip_buffer_push(tty); - - dev_notice(port->dev, "overrun error\n"); - copied++; - } - - return copied; -} - -static inline int sci_handle_breaks(struct uart_port *port) -{ - int copied = 0; - unsigned short status = sci_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; - struct sci_port *s = to_sci_port(port); - - if (uart_handle_break(port)) - return 0; - - if (!s->break_flag && status & SCxSR_BRK(port)) { -#if defined(CONFIG_CPU_SH3) - /* Debounce break */ - s->break_flag = 1; -#endif - /* Notify of BREAK */ - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) - copied++; - - dev_dbg(port->dev, "BREAK detected\n"); - } - - if (copied) - tty_flip_buffer_push(tty); - - copied += sci_handle_fifo_overrun(port); - - return copied; -} - -static irqreturn_t sci_rx_interrupt(int irq, void *ptr) -{ -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct uart_port *port = ptr; - struct sci_port *s = to_sci_port(port); - - if (s->chan_rx) { - u16 scr = sci_in(port, SCSCR); - u16 ssr = sci_in(port, SCxSR); - - /* Disable future Rx interrupts */ - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - disable_irq_nosync(irq); - scr |= 0x4000; - } else { - scr &= ~SCI_CTRL_FLAGS_RIE; - } - sci_out(port, SCSCR, scr); - /* Clear current interrupt */ - sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); - dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", - jiffies, s->rx_timeout); - mod_timer(&s->rx_timer, jiffies + s->rx_timeout); - - return IRQ_HANDLED; - } -#endif - - /* I think sci_receive_chars has to be called irrespective - * of whether the I_IXOFF is set, otherwise, how is the interrupt - * to be disabled? - */ - sci_receive_chars(ptr); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_tx_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - sci_transmit_chars(port); - spin_unlock_irqrestore(&port->lock, flags); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_er_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - - /* Handle errors */ - if (port->type == PORT_SCI) { - if (sci_handle_errors(port)) { - /* discard character in rx buffer */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - } - } else { - sci_handle_fifo_overrun(port); - sci_rx_interrupt(irq, ptr); - } - - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); - - /* Kick the transmission */ - sci_tx_interrupt(irq, ptr); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_br_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - - /* Handle BREAKs */ - sci_handle_breaks(port); - sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) -{ - unsigned short ssr_status, scr_status, err_enabled; - struct uart_port *port = ptr; - struct sci_port *s = to_sci_port(port); - irqreturn_t ret = IRQ_NONE; - - ssr_status = sci_in(port, SCxSR); - scr_status = sci_in(port, SCSCR); - err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); - - /* Tx Interrupt */ - if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && - !s->chan_tx) - ret = sci_tx_interrupt(irq, ptr); - /* - * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / - * DR flags - */ - if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && - (scr_status & SCI_CTRL_FLAGS_RIE)) - ret = sci_rx_interrupt(irq, ptr); - /* Error Interrupt */ - if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) - ret = sci_er_interrupt(irq, ptr); - /* Break Interrupt */ - if ((ssr_status & SCxSR_BRK(port)) && err_enabled) - ret = sci_br_interrupt(irq, ptr); - - return ret; -} - -/* - * Here we define a transistion notifier so that we can update all of our - * ports' baud rate when the peripheral clock changes. - */ -static int sci_notifier(struct notifier_block *self, - unsigned long phase, void *p) -{ - struct sh_sci_priv *priv = container_of(self, - struct sh_sci_priv, clk_nb); - struct sci_port *sci_port; - unsigned long flags; - - if ((phase == CPUFREQ_POSTCHANGE) || - (phase == CPUFREQ_RESUMECHANGE)) { - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - spin_unlock_irqrestore(&priv->lock, flags); - } - - return NOTIFY_OK; -} - -static void sci_clk_enable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - clk_enable(sci_port->iclk); - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - clk_enable(sci_port->fclk); -} - -static void sci_clk_disable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - clk_disable(sci_port->fclk); - clk_disable(sci_port->iclk); -} - -static int sci_request_irq(struct sci_port *port) -{ - int i; - irqreturn_t (*handlers[4])(int irq, void *ptr) = { - sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, - sci_br_interrupt, - }; - const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", - "SCI Transmit Data Empty", "SCI Break" }; - - if (port->irqs[0] == port->irqs[1]) { - if (unlikely(!port->irqs[0])) - return -ENODEV; - - if (request_irq(port->irqs[0], sci_mpxed_interrupt, - IRQF_DISABLED, "sci", port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; - } - } else { - for (i = 0; i < ARRAY_SIZE(handlers); i++) { - if (unlikely(!port->irqs[i])) - continue; - - if (request_irq(port->irqs[i], handlers[i], - IRQF_DISABLED, desc[i], port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; - } - } - } - - return 0; -} - -static void sci_free_irq(struct sci_port *port) -{ - int i; - - if (port->irqs[0] == port->irqs[1]) - free_irq(port->irqs[0], port); - else { - for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { - if (!port->irqs[i]) - continue; - - free_irq(port->irqs[i], port); - } - } -} - -static unsigned int sci_tx_empty(struct uart_port *port) -{ - unsigned short status = sci_in(port, SCxSR); - unsigned short in_tx_fifo = scif_txfill(port); - - return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; -} - -static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ - /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ - /* If you have signals for DTR and DCD, please implement here. */ -} - -static unsigned int sci_get_mctrl(struct uart_port *port) -{ - /* This routine is used for getting signals of: DTR, DCD, DSR, RI, - and CTS/RTS */ - - return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; -} - -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static void sci_dma_tx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned long flags; - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - spin_lock_irqsave(&port->lock, flags); - - xmit->tail += sg_dma_len(&s->sg_tx); - xmit->tail &= UART_XMIT_SIZE - 1; - - port->icount.tx += sg_dma_len(&s->sg_tx); - - async_tx_ack(s->desc_tx); - s->cookie_tx = -EINVAL; - s->desc_tx = NULL; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!uart_circ_empty(xmit)) { - schedule_work(&s->work_tx); - } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Locking: called with port lock held */ -static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, - size_t count) -{ - struct uart_port *port = &s->port; - int i, active, room; - - room = tty_buffer_request_room(tty, count); - - if (s->active_rx == s->cookie_rx[0]) { - active = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - active = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return 0; - } - - if (room < count) - dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", - count - room); - if (!room) - return room; - - for (i = 0; i < room; i++) - tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], - TTY_NORMAL); - - port->icount.rx += room; - - return room; -} - -static void sci_dma_rx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - struct tty_struct *tty = port->state->port.tty; - unsigned long flags; - int count; - - dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); - - spin_lock_irqsave(&port->lock, flags); - - count = sci_dma_rx_push(s, tty, s->buf_len_rx); - - mod_timer(&s->rx_timer, jiffies + s->rx_timeout); - - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(tty); - - schedule_work(&s->work_rx); -} - -static void sci_start_rx(struct uart_port *port); -static void sci_start_tx(struct uart_port *port); - -static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_rx; - struct uart_port *port = &s->port; - - s->chan_rx = NULL; - s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; - dma_release_channel(chan); - if (sg_dma_address(&s->sg_rx[0])) - dma_free_coherent(port->dev, s->buf_len_rx * 2, - sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); - if (enable_pio) - sci_start_rx(port); -} - -static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - - s->chan_tx = NULL; - s->cookie_tx = -EINVAL; - dma_release_channel(chan); - if (enable_pio) - sci_start_tx(port); -} - -static void sci_submit_rx(struct sci_port *s) -{ - struct dma_chan *chan = s->chan_rx; - int i; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - struct dma_async_tx_descriptor *desc; - - desc = chan->device->device_prep_slave_sg(chan, - sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); - - if (desc) { - s->desc_rx[i] = desc; - desc->callback = sci_dma_rx_complete; - desc->callback_param = s; - s->cookie_rx[i] = desc->tx_submit(desc); - } - - if (!desc || s->cookie_rx[i] < 0) { - if (i) { - async_tx_ack(s->desc_rx[0]); - s->cookie_rx[0] = -EINVAL; - } - if (desc) { - async_tx_ack(desc); - s->cookie_rx[i] = -EINVAL; - } - dev_warn(s->port.dev, - "failed to re-start DMA, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, - s->cookie_rx[i], i); - } - - s->active_rx = s->cookie_rx[0]; - - dma_async_issue_pending(chan); -} - -static void work_fn_rx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_rx); - struct uart_port *port = &s->port; - struct dma_async_tx_descriptor *desc; - int new; - - if (s->active_rx == s->cookie_rx[0]) { - new = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - new = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return; - } - desc = s->desc_rx[new]; - - if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != - DMA_SUCCESS) { - /* Handle incomplete DMA receive */ - struct tty_struct *tty = port->state->port.tty; - struct dma_chan *chan = s->chan_rx; - struct sh_desc *sh_desc = container_of(desc, struct sh_desc, - async_tx); - unsigned long flags; - int count; - - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); - dev_dbg(port->dev, "Read %u bytes with cookie %d\n", - sh_desc->partial, sh_desc->cookie); - - spin_lock_irqsave(&port->lock, flags); - count = sci_dma_rx_push(s, tty, sh_desc->partial); - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(tty); - - sci_submit_rx(s); - - return; - } - - s->cookie_rx[new] = desc->tx_submit(desc); - if (s->cookie_rx[new] < 0) { - dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); - sci_rx_dma_release(s, true); - return; - } - - s->active_rx = s->cookie_rx[!new]; - - dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, - s->cookie_rx[new], new, s->active_rx); -} - -static void work_fn_tx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_tx); - struct dma_async_tx_descriptor *desc; - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &s->sg_tx; - - /* - * DMA is idle now. - * Port xmit buffer is already mapped, and it is one page... Just adjust - * offsets and lengths. Since it is a circular buffer, we have to - * transmit till the end, and then the rest. Take the port lock to get a - * consistent xmit buffer state. - */ - spin_lock_irq(&port->lock); - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - spin_unlock_irq(&port->lock); - - BUG_ON(!sg_dma_len(sg)); - - desc = chan->device->device_prep_slave_sg(chan, - sg, s->sg_len_tx, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - - spin_lock_irq(&port->lock); - s->desc_tx = desc; - desc->callback = sci_dma_tx_complete; - desc->callback_param = s; - spin_unlock_irq(&port->lock); - s->cookie_tx = desc->tx_submit(desc); - if (s->cookie_tx < 0) { - dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, - xmit->buf, xmit->tail, xmit->head, s->cookie_tx); - - dma_async_issue_pending(chan); -} -#endif - -static void sci_start_tx(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - unsigned short ctrl; - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 new, scr = sci_in(port, SCSCR); - if (s->chan_tx) - new = scr | 0x8000; - else - new = scr & ~0x8000; - if (new != scr) - sci_out(port, SCSCR, new); - } - if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && - s->cookie_tx < 0) - schedule_work(&s->work_tx); -#endif - if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); - } -} - -static void sci_stop_tx(struct uart_port *port) -{ - unsigned short ctrl; - - /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x8000; - ctrl &= ~SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); -} - -static void sci_start_rx(struct uart_port *port) -{ - unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; - - /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl |= sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; - sci_out(port, SCSCR, ctrl); -} - -static void sci_stop_rx(struct uart_port *port) -{ - unsigned short ctrl; - - /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; - ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); - sci_out(port, SCSCR, ctrl); -} - -static void sci_enable_ms(struct uart_port *port) -{ - /* Nothing here yet .. */ -} - -static void sci_break_ctl(struct uart_port *port, int break_state) -{ - /* Nothing here yet .. */ -} - -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static bool filter(struct dma_chan *chan, void *slave) -{ - struct sh_dmae_slave *param = slave; - - dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, - param->slave_id); - - if (param->dma_dev == chan->device->dev) { - chan->private = param; - return true; - } else { - return false; - } -} - -static void rx_timer_fn(unsigned long arg) -{ - struct sci_port *s = (struct sci_port *)arg; - struct uart_port *port = &s->port; - u16 scr = sci_in(port, SCSCR); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - scr &= ~0x4000; - enable_irq(s->irqs[1]); - } - sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); - dev_dbg(port->dev, "DMA Rx timed out\n"); - schedule_work(&s->work_rx); -} - -static void sci_request_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - struct sh_dmae_slave *param; - struct dma_chan *chan; - dma_cap_mask_t mask; - int nent; - - dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, - port->line, s->dma_dev); - - if (!s->dma_dev) - return; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - param = &s->param_tx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ - param->slave_id = s->slave_tx; - param->dma_dev = s->dma_dev; - - s->cookie_tx = -EINVAL; - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); - if (chan) { - s->chan_tx = chan; - sg_init_table(&s->sg_tx, 1); - /* UART circular tx buffer is an aligned page. */ - BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); - sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), - UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); - nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); - if (!nent) - sci_tx_dma_release(s, false); - else - dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, - sg_dma_len(&s->sg_tx), - port->state->xmit.buf, sg_dma_address(&s->sg_tx)); - - s->sg_len_tx = nent; - - INIT_WORK(&s->work_tx, work_fn_tx); - } - - param = &s->param_rx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ - param->slave_id = s->slave_rx; - param->dma_dev = s->dma_dev; - - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); - if (chan) { - dma_addr_t dma[2]; - void *buf[2]; - int i; - - s->chan_rx = chan; - - s->buf_len_rx = 2 * max(16, (int)port->fifosize); - buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, - &dma[0], GFP_KERNEL); - - if (!buf[0]) { - dev_warn(port->dev, - "failed to allocate dma buffer, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - - buf[1] = buf[0] + s->buf_len_rx; - dma[1] = dma[0] + s->buf_len_rx; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - - sg_init_table(sg, 1); - sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, - (int)buf[i] & ~PAGE_MASK); - sg_dma_address(sg) = dma[i]; - } - - INIT_WORK(&s->work_rx, work_fn_rx); - setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); - - sci_submit_rx(s); - } -} - -static void sci_free_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - if (!s->dma_dev) - return; - - if (s->chan_tx) - sci_tx_dma_release(s, false); - if (s->chan_rx) - sci_rx_dma_release(s, false); -} -#endif - -static int sci_startup(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - if (s->enable) - s->enable(port); - - sci_request_irq(s); -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_request_dma(port); -#endif - sci_start_tx(port); - sci_start_rx(port); - - return 0; -} - -static void sci_shutdown(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - sci_stop_rx(port); - sci_stop_tx(port); -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_free_dma(port); -#endif - sci_free_irq(s); - - if (s->disable) - s->disable(port); -} - -static void sci_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct sci_port *s = to_sci_port(port); -#endif - unsigned int status, baud, smr_val, max_baud; - int t = -1; - u16 scfcr = 0; - - /* - * earlyprintk comes here early on with port->uartclk set to zero. - * the clock framework is not up and running at this point so here - * we assume that 115200 is the maximum baud rate. please note that - * the baud rate is not programmed during earlyprintk - it is assumed - * that the previous boot loader has enabled required clocks and - * setup the baud rate generator hardware for us already. - */ - max_baud = port->uartclk ? port->uartclk / 16 : 115200; - - baud = uart_get_baud_rate(port, termios, old, 0, max_baud); - if (likely(baud && port->uartclk)) - t = SCBRR_VALUE(baud, port->uartclk); - - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - - if (port->type != PORT_SCI) - sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); - - smr_val = sci_in(port, SCSMR) & 3; - if ((termios->c_cflag & CSIZE) == CS7) - smr_val |= 0x40; - if (termios->c_cflag & PARENB) - smr_val |= 0x20; - if (termios->c_cflag & PARODD) - smr_val |= 0x30; - if (termios->c_cflag & CSTOPB) - smr_val |= 0x08; - - uart_update_timeout(port, termios->c_cflag, baud); - - sci_out(port, SCSMR, smr_val); - - dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, - SCSCR_INIT(port)); - - if (t > 0) { - if (t >= 256) { - sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); - t >>= 2; - } else - sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); - - sci_out(port, SCBRR, t); - udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ - } - - sci_init_pins(port, termios->c_cflag); - sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); - - sci_out(port, SCSCR, SCSCR_INIT(port)); - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - /* - * Calculate delay for 1.5 DMA buffers: see - * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits - * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function - * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." - * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO - * sizes), but it has been found out experimentally, that this is not - * enough: the driver too often needlessly runs on a DMA timeout. 20ms - * as a minimum seem to work perfectly. - */ - if (s->chan_rx) { - s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / - port->fifosize / 2; - dev_dbg(port->dev, - "DMA Rx t-out %ums, tty t-out %u jiffies\n", - s->rx_timeout * 1000 / HZ, port->timeout); - if (s->rx_timeout < msecs_to_jiffies(20)) - s->rx_timeout = msecs_to_jiffies(20); - } -#endif - - if ((termios->c_cflag & CREAD) != 0) - sci_start_rx(port); -} - -static const char *sci_type(struct uart_port *port) -{ - switch (port->type) { - case PORT_IRDA: - return "irda"; - case PORT_SCI: - return "sci"; - case PORT_SCIF: - return "scif"; - case PORT_SCIFA: - return "scifa"; - case PORT_SCIFB: - return "scifb"; - } - - return NULL; -} - -static void sci_release_port(struct uart_port *port) -{ - /* Nothing here yet .. */ -} - -static int sci_request_port(struct uart_port *port) -{ - /* Nothing here yet .. */ - return 0; -} - -static void sci_config_port(struct uart_port *port, int flags) -{ - struct sci_port *s = to_sci_port(port); - - port->type = s->type; - - if (port->membase) - return; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap_nocache(port->mapbase, 0x40); - - if (IS_ERR(port->membase)) - dev_err(port->dev, "can't remap port#%d\n", port->line); - } else { - /* - * For the simple (and majority of) cases where we don't - * need to do any remapping, just cast the cookie - * directly. - */ - port->membase = (void __iomem *)port->mapbase; - } -} - -static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct sci_port *s = to_sci_port(port); - - if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) - return -EINVAL; - if (ser->baud_base < 2400) - /* No paper tape reader for Mitch.. */ - return -EINVAL; - - return 0; -} - -static struct uart_ops sci_uart_ops = { - .tx_empty = sci_tx_empty, - .set_mctrl = sci_set_mctrl, - .get_mctrl = sci_get_mctrl, - .start_tx = sci_start_tx, - .stop_tx = sci_stop_tx, - .stop_rx = sci_stop_rx, - .enable_ms = sci_enable_ms, - .break_ctl = sci_break_ctl, - .startup = sci_startup, - .shutdown = sci_shutdown, - .set_termios = sci_set_termios, - .type = sci_type, - .release_port = sci_release_port, - .request_port = sci_request_port, - .config_port = sci_config_port, - .verify_port = sci_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = sci_poll_get_char, - .poll_put_char = sci_poll_put_char, -#endif -}; - -static int __devinit sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) -{ - struct uart_port *port = &sci_port->port; - - port->ops = &sci_uart_ops; - port->iotype = UPIO_MEM; - port->line = index; - - switch (p->type) { - case PORT_SCIFB: - port->fifosize = 256; - break; - case PORT_SCIFA: - port->fifosize = 64; - break; - case PORT_SCIF: - port->fifosize = 16; - break; - default: - port->fifosize = 1; - break; - } - - if (dev) { - sci_port->iclk = clk_get(&dev->dev, "sci_ick"); - if (IS_ERR(sci_port->iclk)) { - sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); - if (IS_ERR(sci_port->iclk)) { - dev_err(&dev->dev, "can't get iclk\n"); - return PTR_ERR(sci_port->iclk); - } - } - - /* - * The function clock is optional, ignore it if we can't - * find it. - */ - sci_port->fclk = clk_get(&dev->dev, "sci_fck"); - if (IS_ERR(sci_port->fclk)) - sci_port->fclk = NULL; - - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; - port->dev = &dev->dev; - } - - sci_port->break_timer.data = (unsigned long)sci_port; - sci_port->break_timer.function = sci_break_timer; - init_timer(&sci_port->break_timer); - - port->mapbase = p->mapbase; - port->membase = p->membase; - - port->irq = p->irqs[SCIx_TXI_IRQ]; - port->flags = p->flags; - sci_port->type = port->type = p->type; - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_port->dma_dev = p->dma_dev; - sci_port->slave_tx = p->dma_slave_tx; - sci_port->slave_rx = p->dma_slave_rx; - - dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, - p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); -#endif - - memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); - return 0; -} - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static struct tty_driver *serial_console_device(struct console *co, int *index) -{ - struct uart_driver *p = &sci_uart_driver; - *index = co->index; - return p->tty_driver; -} - -static void serial_console_putchar(struct uart_port *port, int ch) -{ - sci_poll_put_char(port, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void serial_console_write(struct console *co, const char *s, - unsigned count) -{ - struct uart_port *port = co->data; - struct sci_port *sci_port = to_sci_port(port); - unsigned short bits; - - if (sci_port->enable) - sci_port->enable(port); - - uart_console_write(port, s, count, serial_console_putchar); - - /* wait until fifo is empty and last bit has been transmitted */ - bits = SCxSR_TDxE(port) | SCxSR_TEND(port); - while ((sci_in(port, SCxSR) & bits) != bits) - cpu_relax(); - - if (sci_port->disable) - sci_port->disable(port); -} - -static int __devinit serial_console_setup(struct console *co, char *options) -{ - struct sci_port *sci_port; - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= SCI_NPORTS) - co->index = 0; - - if (co->data) { - port = co->data; - sci_port = to_sci_port(port); - } else { - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; - } - - /* - * Also need to check port->type, we don't actually have any - * UPIO_PORT ports, but uart_report_port() handily misreports - * it anyways if we don't have a port available by the time this is - * called. - */ - if (!port->type) - return -ENODEV; - - sci_config_port(port, 0); - - if (sci_port->enable) - sci_port->enable(port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - ret = uart_set_options(port, co, baud, parity, bits, flow); -#if defined(__H8300H__) || defined(__H8300S__) - /* disable rx interrupt */ - if (ret == 0) - sci_stop_rx(port); -#endif - /* TODO: disable clock */ - return ret; -} - -static struct console serial_console = { - .name = "ttySC", - .device = serial_console_device, - .write = serial_console_write, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init sci_console_init(void) -{ - register_console(&serial_console); - return 0; -} -console_initcall(sci_console_init); - -static struct sci_port early_serial_port; -static struct console early_serial_console = { - .name = "early_ttySC", - .write = serial_console_write, - .flags = CON_PRINTBUFFER, -}; -static char early_serial_buf[32]; - -#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ - -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) -#define SCI_CONSOLE (&serial_console) -#else -#define SCI_CONSOLE 0 -#endif - -static char banner[] __initdata = - KERN_INFO "SuperH SCI(F) driver initialized\n"; - -static struct uart_driver sci_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "sci", - .dev_name = "ttySC", - .major = SCI_MAJOR, - .minor = SCI_MINOR_START, - .nr = SCI_NPORTS, - .cons = SCI_CONSOLE, -}; - - -static int sci_remove(struct platform_device *dev) -{ - struct sh_sci_priv *priv = platform_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) { - uart_remove_one_port(&sci_uart_driver, &p->port); - clk_put(p->iclk); - clk_put(p->fclk); - } - spin_unlock_irqrestore(&priv->lock, flags); - - kfree(priv); - return 0; -} - -static int __devinit sci_probe_single(struct platform_device *dev, - unsigned int index, - struct plat_sci_port *p, - struct sci_port *sciport) -{ - struct sh_sci_priv *priv = platform_get_drvdata(dev); - unsigned long flags; - int ret; - - /* Sanity check */ - if (unlikely(index >= SCI_NPORTS)) { - dev_notice(&dev->dev, "Attempting to register port " - "%d when only %d are available.\n", - index+1, SCI_NPORTS); - dev_notice(&dev->dev, "Consider bumping " - "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - return 0; - } - - ret = sci_init_single(dev, sciport, index, p); - if (ret) - return ret; - - ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - if (ret) - return ret; - - INIT_LIST_HEAD(&sciport->node); - - spin_lock_irqsave(&priv->lock, flags); - list_add(&sciport->node, &priv->ports); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -/* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need - * remapping (such as sh64) should also set UPF_IOREMAP. - */ -static int __devinit sci_probe(struct platform_device *dev) -{ - struct plat_sci_port *p = dev->dev.platform_data; - struct sh_sci_priv *priv; - int i, ret = -EINVAL; - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE - if (is_early_platform_device(dev)) { - if (dev->id == -1) - return -ENOTSUPP; - early_serial_console.index = dev->id; - early_serial_console.data = &early_serial_port.port; - sci_init_single(NULL, &early_serial_port, dev->id, p); - serial_console_setup(&early_serial_console, early_serial_buf); - if (!strstr(early_serial_buf, "keep")) - early_serial_console.flags |= CON_BOOT; - register_console(&early_serial_console); - return 0; - } -#endif - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - INIT_LIST_HEAD(&priv->ports); - spin_lock_init(&priv->lock); - platform_set_drvdata(dev, priv); - - priv->clk_nb.notifier_call = sci_notifier; - cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); - - if (dev->id != -1) { - ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); - if (ret) - goto err_unreg; - } else { - for (i = 0; p && p->flags != 0; p++, i++) { - ret = sci_probe_single(dev, i, p, &sci_ports[i]); - if (ret) - goto err_unreg; - } - } - -#ifdef CONFIG_SH_STANDARD_BIOS - sh_bios_gdb_detach(); -#endif - - return 0; - -err_unreg: - sci_remove(dev); - return ret; -} - -static int sci_suspend(struct device *dev) -{ - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_suspend_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static int sci_resume(struct device *dev) -{ - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_resume_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static const struct dev_pm_ops sci_dev_pm_ops = { - .suspend = sci_suspend, - .resume = sci_resume, -}; - -static struct platform_driver sci_driver = { - .probe = sci_probe, - .remove = sci_remove, - .driver = { - .name = "sh-sci", - .owner = THIS_MODULE, - .pm = &sci_dev_pm_ops, - }, -}; - -static int __init sci_init(void) -{ - int ret; - - printk(banner); - - ret = uart_register_driver(&sci_uart_driver); - if (likely(ret == 0)) { - ret = platform_driver_register(&sci_driver); - if (unlikely(ret)) - uart_unregister_driver(&sci_uart_driver); - } - - return ret; -} - -static void __exit sci_exit(void) -{ - platform_driver_unregister(&sci_driver); - uart_unregister_driver(&sci_uart_driver); -} - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -early_platform_init_buffer("earlyprintk", &sci_driver, - early_serial_buf, ARRAY_SIZE(early_serial_buf)); -#endif -module_init(sci_init); -module_exit(sci_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:sh-sci"); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h deleted file mode 100644 index 4bc614e..0000000 --- a/drivers/serial/sh-sci.h +++ /dev/null @@ -1,660 +0,0 @@ -#include -#include -#include - -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include -#endif -#if defined(CONFIG_H8S2678) -#include -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ -# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCIF0 0xA4400000 -# define SCIF2 0xA4410000 -# define SCSMR_Ir 0xA44A0000 -# define IRDA_SCIF SCIF0 -# define SCPCR 0xA4000116 -# define SCPDR 0xA4000136 - -/* Set the clock source, - * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input - * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output - */ -# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define PORT_PTCR 0xA405011EUL -# define PORT_PVCR 0xA4050122UL -# define SCIF_ORER 0x0200 /* overrun error bit */ -#elif defined(CONFIG_SH_RTS7751R2D) -# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) -# define SCSPTR1 0xffe0001c /* 8 bit SCI */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ -# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ -# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define PACR 0xa4050100 -# define PBCR 0xa4050102 -# define SCSCR_INIT(port) 0x3B -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) -# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10010 /* 16 bit SCIF */ -# define SCSPTR2 0xffe20010 /* 16 bit SCIF */ -# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define PADR 0xA4050120 -# define PSDR 0xA405013e -# define PWDR 0xA4050166 -# define PSCR 0xA405011E -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7366) -# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ -# define SCSPTR0 SCPDR0 -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) -# define SCSPTR0 0xa4050160 -# define SCSPTR1 0xa405013e -# define SCSPTR2 0xa4050160 -# define SCSPTR3 0xa405013e -# define SCSPTR4 0xa4050128 -# define SCSPTR5 0xa4050128 -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -# define SCIF_BASE_ADDR 0x01030000 -# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR -# define SCIF_PTR2_OFFS 0x0000020 -# define SCIF_LSR2_OFFS 0x0000024 -# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ -# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_H8S2678) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) -# define SCSPTR0 0xfe4b0020 -# define SCSPTR1 0xfe4b0020 -# define SCSPTR2 0xfe4b0020 -# define SCIF_ORER 0x0001 -# define SCSCR_INIT(port) 0x38 -# define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ -# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) -# define SCSPTR0 0xff923020 /* 16 bit SCIF */ -# define SCSPTR1 0xff924020 /* 16 bit SCIF */ -# define SCSPTR2 0xff925020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ - -#if defined(CONFIG_SH_SH2007) -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ -# define SCSCR_INIT(port) 0x38 -#else -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ -# define SCSCR_INIT(port) 0x3a -#endif - -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ -# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ -# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ -# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ -# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ -# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ -# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ -# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ -# if defined(CONFIG_CPU_SUBTYPE_SH7201) -# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */ -# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */ -# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ -# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ -# endif -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -# define SCSPTR1 0xf8410020 /* 16 bit SCIF */ -# define SCSPTR2 0xf8420020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ -# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ -# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#else -# error CPU subtype not defined -#endif - -/* SCSCR */ -#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ -#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ -#define SCI_CTRL_FLAGS_TE 0x20 /* all */ -#define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) -#else -#define SCI_CTRL_FLAGS_REIE 0 -#endif -/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ -/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ - -/* SCxSR SCI */ -#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ - -#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) - -/* SCxSR SCIF */ -#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCIF_ORER 0x0200 -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -/* SH7763 SCIF2 support */ -# define SCIF2_RFDC_MASK 0x001f -# define SCIF2_TXROOM_MAX 16 -#else -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -# define SCIF_RFDC_MASK 0x001f -# define SCIF_TXROOM_MAX 16 -#endif - -#ifndef SCIF_ORER -#define SCIF_ORER 0x0000 -#endif - -#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) -#else -# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) -# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) -# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) -# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) -#endif - -/* SCFCR */ -#define SCFCR_RFRST 0x0002 -#define SCFCR_TFRST 0x0004 -#define SCFCR_TCRST 0x4000 -#define SCFCR_MCE 0x0008 - -#define SCI_MAJOR 204 -#define SCI_MINOR_START 8 - -/* Generic serial flags */ -#define SCI_RX_THROTTLE 0x0000001 - -#define SCI_MAGIC 0xbabeface - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define SCI_EVENT_WRITE_WAKEUP 0 - -#define SCI_IN(size, offset) \ - if ((size) == 8) { \ - return ioread8(port->membase + (offset)); \ - } else { \ - return ioread16(port->membase + (offset)); \ - } -#define SCI_OUT(size, offset, value) \ - if ((size) == 8) { \ - iowrite8(value, port->membase + (offset)); \ - } else if ((size) == 16) { \ - iowrite16(value, port->membase + (offset)); \ - } - -#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_IN(scif_size, scif_offset) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_IN(sci_size, sci_offset); \ - } \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_OUT(scif_size, scif_offset, value) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_OUT(sci_size, sci_offset, value); \ - } \ - } - -#ifdef CONFIG_H8300 -/* h8300 don't have SCIF */ -#define CPU_SCIF_FNS(name) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - return 0; \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - } -#else -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - SCI_IN(scif_size, scif_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - SCI_OUT(scif_size, scif_offset, value); \ - } -#endif - -#define CPU_SCI_FNS(name, sci_offset, sci_size) \ - static inline unsigned int sci_##name##_in(struct uart_port* port) \ - { \ - SCI_IN(sci_size, sci_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ - { \ - SCI_OUT(sci_size, sci_offset, value); \ - } - -#if defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#elif defined(CONFIG_ARCH_SH7372) -#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) -#endif -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) - #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) - #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) - -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCxTDR, 0x20, 8) -SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_ARCH_SH7372) -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 16) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCTFDR, 0x38, 16) -SCIF_FNS(SCRFDR, 0x3c, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) -SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) -SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) -SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) -SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) -SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) -SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCLSR, 0x24, 16) -#else -/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ -/* name off sz off sz off sz off sz off sz*/ -SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) -SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) -SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) -SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) -SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) -SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) -SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) -SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#else -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7722) -SCIF_FNS(SCSPTR, 0, 0, 0, 0) -#else -SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) -#endif -SCIF_FNS(SCLSR, 0, 0, 0x24, 16) -#endif -#endif -#define sci_in(port, reg) sci_##reg##_in(port) -#define sci_out(port, reg, value) sci_##reg##_out(port, value) - -/* H8/300 series SCI pins assignment */ -#if defined(__H8300H__) || defined(__H8300S__) -static const struct __attribute__((packed)) { - int port; /* GPIO port no */ - unsigned short rx,tx; /* GPIO bit no */ -} h8300_sci_pins[] = { -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) - { /* SCI0 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_PB, - .rx = H8300_GPIO_B7, - .tx = H8300_GPIO_B6, - } -#elif defined(CONFIG_H8S2678) - { /* SCI0 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_P5, - .rx = H8300_GPIO_B1, - .tx = H8300_GPIO_B0, - } -#endif -}; -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffffe80) - return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(__H8300H__) || defined(__H8300S__) -static inline int sci_rxd_in(struct uart_port *port) -{ - int ch = (port->mapbase - SMR0) >> 3; - return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; -} -#else /* default case for non-SCI processors */ -static inline int sci_rxd_in(struct uart_port *port) -{ - return 1; -} -#endif - -/* - * Values for the BitRate Register (SCBRR) - * - * The values are actually divisors for a frequency which can - * be internal to the SH3 (14.7456MHz) or derived from an external - * clock source. This driver assumes the internal clock is used; - * to support using an external clock source, config options or - * possibly command-line options would need to be added. - * - * Also, to support speeds below 2400 (why?) the lower 2 bits of - * the SCSMR register would also need to be set to non-zero values. - * - * -- Greg Banks 27Feb2000 - * - * Answer: The SCBRR register is only eight bits, and the value in - * it gets larger with lower baud rates. At around 2400 (depending on - * the peripherial module clock) you run out of bits. However the - * lower two bits of SCSMR allow the module clock to be divided down, - * scaling the value which is needed in SCBRR. - * - * -- Stuart Menefy - 23 May 2000 - * - * I meant, why would anyone bother with bitrates below 2400. - * - * -- Greg Banks - 7Jul2000 - * - * You "speedist"! How will I use my 110bps ASR-33 teletype with paper - * tape reader as a console! - * - * -- Mitch Davis - 15 Jul 2000 - */ - -#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ - !defined(CONFIG_SH_SH2007) -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -static inline int scbrr_calc(struct uart_port *port, int bps, int clk) -{ - if (port->type == PORT_SCIF) - return (clk+16*bps)/(32*bps)-1; - else - return ((clk*2)+16*bps)/(16*bps)-1; -} -#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#else /* Generic SH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) -#endif diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c deleted file mode 100644 index cff9a30..0000000 --- a/drivers/serial/sn_console.c +++ /dev/null @@ -1,1085 +0,0 @@ -/* - * C-Brick Serial Port (and console) driver for SGI Altix machines. - * - * This driver is NOT suitable for talking to the l1-controller for - * anything other than 'console activities' --- please use the l1 - * driver for that. - * - * - * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane, - * Mountain View, CA 94043, or: - * - * http://www.sgi.com - * - * For further information regarding this notice, see: - * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for mdelay */ -#include -#include - -#include -#include -#include - -/* number of characters we can transmit to the SAL console at a time */ -#define SN_SAL_MAX_CHARS 120 - -/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to - * avoid losing chars, (always has to be a power of 2) */ -#define SN_SAL_BUFFER_SIZE (64 * (1 << 10)) - -#define SN_SAL_UART_FIFO_DEPTH 16 -#define SN_SAL_UART_FIFO_SPEED_CPS (9600/10) - -/* sn_transmit_chars() calling args */ -#define TRANSMIT_BUFFERED 0 -#define TRANSMIT_RAW 1 - -/* To use dynamic numbers only and not use the assigned major and minor, - * define the following.. */ - /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */ -#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */ - -/* Device name we're using */ -#define DEVICE_NAME "ttySG" -#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */ -/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */ -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 40 - -#ifdef CONFIG_MAGIC_SYSRQ -static char sysrq_serial_str[] = "\eSYS"; -static char *sysrq_serial_ptr = sysrq_serial_str; -static unsigned long sysrq_requested; -#endif /* CONFIG_MAGIC_SYSRQ */ - -/* - * Port definition - this kinda drives it all - */ -struct sn_cons_port { - struct timer_list sc_timer; - struct uart_port sc_port; - struct sn_sal_ops { - int (*sal_puts_raw) (const char *s, int len); - int (*sal_puts) (const char *s, int len); - int (*sal_getc) (void); - int (*sal_input_pending) (void); - void (*sal_wakeup_transmit) (struct sn_cons_port *, int); - } *sc_ops; - unsigned long sc_interrupt_timeout; - int sc_is_asynch; -}; - -static struct sn_cons_port sal_console_port; -static int sn_process_input; - -/* Only used if USE_DYNAMIC_MINOR is set to 1 */ -static struct miscdevice misc; /* used with misc_register for dynamic */ - -extern void early_sn_setup(void); - -#undef DEBUG -#ifdef DEBUG -static int sn_debug_printf(const char *fmt, ...); -#define DPRINTF(x...) sn_debug_printf(x) -#else -#define DPRINTF(x...) do { } while (0) -#endif - -/* Prototypes */ -static int snt_hw_puts_raw(const char *, int); -static int snt_hw_puts_buffered(const char *, int); -static int snt_poll_getc(void); -static int snt_poll_input_pending(void); -static int snt_intr_getc(void); -static int snt_intr_input_pending(void); -static void sn_transmit_chars(struct sn_cons_port *, int); - -/* A table for polling: - */ -static struct sn_sal_ops poll_ops = { - .sal_puts_raw = snt_hw_puts_raw, - .sal_puts = snt_hw_puts_raw, - .sal_getc = snt_poll_getc, - .sal_input_pending = snt_poll_input_pending -}; - -/* A table for interrupts enabled */ -static struct sn_sal_ops intr_ops = { - .sal_puts_raw = snt_hw_puts_raw, - .sal_puts = snt_hw_puts_buffered, - .sal_getc = snt_intr_getc, - .sal_input_pending = snt_intr_input_pending, - .sal_wakeup_transmit = sn_transmit_chars -}; - -/* the console does output in two distinctly different ways: - * synchronous (raw) and asynchronous (buffered). initally, early_printk - * does synchronous output. any data written goes directly to the SAL - * to be output (incidentally, it is internally buffered by the SAL) - * after interrupts and timers are initialized and available for use, - * the console init code switches to asynchronous output. this is - * also the earliest opportunity to begin polling for console input. - * after console initialization, console output and tty (serial port) - * output is buffered and sent to the SAL asynchronously (either by - * timer callback or by UART interrupt) */ - -/* routines for running the console in polling mode */ - -/** - * snt_poll_getc - Get a character from the console in polling mode - * - */ -static int snt_poll_getc(void) -{ - int ch; - - ia64_sn_console_getc(&ch); - return ch; -} - -/** - * snt_poll_input_pending - Check if any input is waiting - polling mode. - * - */ -static int snt_poll_input_pending(void) -{ - int status, input; - - status = ia64_sn_console_check(&input); - return !status && input; -} - -/* routines for an interrupt driven console (normal) */ - -/** - * snt_intr_getc - Get a character from the console, interrupt mode - * - */ -static int snt_intr_getc(void) -{ - return ia64_sn_console_readc(); -} - -/** - * snt_intr_input_pending - Check if input is pending, interrupt mode - * - */ -static int snt_intr_input_pending(void) -{ - return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV; -} - -/* these functions are polled and interrupt */ - -/** - * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode - * @s: String - * @len: Length - * - */ -static int snt_hw_puts_raw(const char *s, int len) -{ - /* this will call the PROM and not return until this is done */ - return ia64_sn_console_putb(s, len); -} - -/** - * snt_hw_puts_buffered - Send string to console, polled or interrupt mode - * @s: String - * @len: Length - * - */ -static int snt_hw_puts_buffered(const char *s, int len) -{ - /* queue data to the PROM */ - return ia64_sn_console_xmit_chars((char *)s, len); -} - -/* uart interface structs - * These functions are associated with the uart_port that the serial core - * infrastructure calls. - * - * Note: Due to how the console works, many routines are no-ops. - */ - -/** - * snp_type - What type of console are we? - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *snp_type(struct uart_port *port) -{ - return ("SGI SN L1"); -} - -/** - * snp_tx_empty - Is the transmitter empty? We pretend we're always empty - * @port: Port to operate on (we ignore since we only have one port) - * - */ -static unsigned int snp_tx_empty(struct uart_port *port) -{ - return 1; -} - -/** - * snp_stop_tx - stop the transmitter - no-op for us - * @port: Port to operat eon - we ignore - no-op function - * - */ -static void snp_stop_tx(struct uart_port *port) -{ -} - -/** - * snp_release_port - Free i/o and resources for port - no-op for us - * @port: Port to operate on - we ignore - no-op function - * - */ -static void snp_release_port(struct uart_port *port) -{ -} - -/** - * snp_enable_ms - Force modem status interrupts on - no-op for us - * @port: Port to operate on - we ignore - no-op function - * - */ -static void snp_enable_ms(struct uart_port *port) -{ -} - -/** - * snp_shutdown - shut down the port - free irq and disable - no-op for us - * @port: Port to shut down - we ignore - * - */ -static void snp_shutdown(struct uart_port *port) -{ -} - -/** - * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console - * @port: Port to operate on - we ignore - * @mctrl: Lines to set/unset - we ignore - * - */ -static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/** - * snp_get_mctrl - get contorl line info, we just return a static value - * @port: port to operate on - we only have one port so we ignore this - * - */ -static unsigned int snp_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS; -} - -/** - * snp_stop_rx - Stop the receiver - we ignor ethis - * @port: Port to operate on - we ignore - * - */ -static void snp_stop_rx(struct uart_port *port) -{ -} - -/** - * snp_start_tx - Start transmitter - * @port: Port to operate on - * - */ -static void snp_start_tx(struct uart_port *port) -{ - if (sal_console_port.sc_ops->sal_wakeup_transmit) - sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port, - TRANSMIT_BUFFERED); - -} - -/** - * snp_break_ctl - handle breaks - ignored by us - * @port: Port to operate on - * @break_state: Break state - * - */ -static void snp_break_ctl(struct uart_port *port, int break_state) -{ -} - -/** - * snp_startup - Start up the serial port - always return 0 (We're always on) - * @port: Port to operate on - * - */ -static int snp_startup(struct uart_port *port) -{ - return 0; -} - -/** - * snp_set_termios - set termios stuff - we ignore these - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -snp_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -} - -/** - * snp_request_port - allocate resources for port - ignored by us - * @port: port to operate on - * - */ -static int snp_request_port(struct uart_port *port) -{ - return 0; -} - -/** - * snp_config_port - allocate resources, set up - we ignore, we're always on - * @port: Port to operate on - * @flags: flags used for port setup - * - */ -static void snp_config_port(struct uart_port *port, int flags) -{ -} - -/* Associate the uart functions above - given to serial core */ - -static struct uart_ops sn_console_ops = { - .tx_empty = snp_tx_empty, - .set_mctrl = snp_set_mctrl, - .get_mctrl = snp_get_mctrl, - .stop_tx = snp_stop_tx, - .start_tx = snp_start_tx, - .stop_rx = snp_stop_rx, - .enable_ms = snp_enable_ms, - .break_ctl = snp_break_ctl, - .startup = snp_startup, - .shutdown = snp_shutdown, - .set_termios = snp_set_termios, - .pm = NULL, - .type = snp_type, - .release_port = snp_release_port, - .request_port = snp_request_port, - .config_port = snp_config_port, - .verify_port = NULL, -}; - -/* End of uart struct functions and defines */ - -#ifdef DEBUG - -/** - * sn_debug_printf - close to hardware debugging printf - * @fmt: printf format - * - * This is as "close to the metal" as we can get, used when the driver - * itself may be broken. - * - */ -static int sn_debug_printf(const char *fmt, ...) -{ - static char printk_buf[1024]; - int printed_len; - va_list args; - - va_start(args, fmt); - printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args); - - if (!sal_console_port.sc_ops) { - sal_console_port.sc_ops = &poll_ops; - early_sn_setup(); - } - sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len); - - va_end(args); - return printed_len; -} -#endif /* DEBUG */ - -/* - * Interrupt handling routines. - */ - -/** - * sn_receive_chars - Grab characters, pass them to tty layer - * @port: Port to operate on - * @flags: irq flags - * - * Note: If we're not registered with the serial core infrastructure yet, - * we don't try to send characters to it... - * - */ -static void -sn_receive_chars(struct sn_cons_port *port, unsigned long flags) -{ - int ch; - struct tty_struct *tty; - - if (!port) { - printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); - return; - } - - if (!port->sc_ops) { - printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); - return; - } - - if (port->sc_port.state) { - /* The serial_core stuffs are initialized, use them */ - tty = port->sc_port.state->port.tty; - } - else { - /* Not registered yet - can't pass to tty layer. */ - tty = NULL; - } - - while (port->sc_ops->sal_input_pending()) { - ch = port->sc_ops->sal_getc(); - if (ch < 0) { - printk(KERN_ERR "sn_console: An error occured while " - "obtaining data from the console (0x%0x)\n", ch); - break; - } -#ifdef CONFIG_MAGIC_SYSRQ - if (sysrq_requested) { - unsigned long sysrq_timeout = sysrq_requested + HZ*5; - - sysrq_requested = 0; - if (ch && time_before(jiffies, sysrq_timeout)) { - spin_unlock_irqrestore(&port->sc_port.lock, flags); - handle_sysrq(ch); - spin_lock_irqsave(&port->sc_port.lock, flags); - /* ignore actual sysrq command char */ - continue; - } - } - if (ch == *sysrq_serial_ptr) { - if (!(*++sysrq_serial_ptr)) { - sysrq_requested = jiffies; - sysrq_serial_ptr = sysrq_serial_str; - } - /* - * ignore the whole sysrq string except for the - * leading escape - */ - if (ch != '\e') - continue; - } - else - sysrq_serial_ptr = sysrq_serial_str; -#endif /* CONFIG_MAGIC_SYSRQ */ - - /* record the character to pass up to the tty layer */ - if (tty) { - if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) - break; - } - port->sc_port.icount.rx++; - } - - if (tty) - tty_flip_buffer_push(tty); -} - -/** - * sn_transmit_chars - grab characters from serial core, send off - * @port: Port to operate on - * @raw: Transmit raw or buffered - * - * Note: If we're early, before we're registered with serial core, the - * writes are going through sn_sal_console_write because that's how - * register_console has been set up. We currently could have asynch - * polls calling this function due to sn_sal_switch_to_asynch but we can - * ignore them until we register with the serial core stuffs. - * - */ -static void sn_transmit_chars(struct sn_cons_port *port, int raw) -{ - int xmit_count, tail, head, loops, ii; - int result; - char *start; - struct circ_buf *xmit; - - if (!port) - return; - - BUG_ON(!port->sc_is_asynch); - - if (port->sc_port.state) { - /* We're initialized, using serial core infrastructure */ - xmit = &port->sc_port.state->xmit; - } else { - /* Probably sn_sal_switch_to_asynch has been run but serial core isn't - * initialized yet. Just return. Writes are going through - * sn_sal_console_write (due to register_console) at this time. - */ - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) { - /* Nothing to do. */ - ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT); - return; - } - - head = xmit->head; - tail = xmit->tail; - start = &xmit->buf[tail]; - - /* twice around gets the tail to the end of the buffer and - * then to the head, if needed */ - loops = (head < tail) ? 2 : 1; - - for (ii = 0; ii < loops; ii++) { - xmit_count = (head < tail) ? - (UART_XMIT_SIZE - tail) : (head - tail); - - if (xmit_count > 0) { - if (raw == TRANSMIT_RAW) - result = - port->sc_ops->sal_puts_raw(start, - xmit_count); - else - result = - port->sc_ops->sal_puts(start, xmit_count); -#ifdef DEBUG - if (!result) - DPRINTF("`"); -#endif - if (result > 0) { - xmit_count -= result; - port->sc_port.icount.tx += result; - tail += result; - tail &= UART_XMIT_SIZE - 1; - xmit->tail = tail; - start = &xmit->buf[tail]; - } - } - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&port->sc_port); - - if (uart_circ_empty(xmit)) - snp_stop_tx(&port->sc_port); /* no-op for us */ -} - -/** - * sn_sal_interrupt - Handle console interrupts - * @irq: irq #, useful for debug statements - * @dev_id: our pointer to our port (sn_cons_port which contains the uart port) - * - */ -static irqreturn_t sn_sal_interrupt(int irq, void *dev_id) -{ - struct sn_cons_port *port = (struct sn_cons_port *)dev_id; - unsigned long flags; - int status = ia64_sn_console_intr_status(); - - if (!port) - return IRQ_NONE; - - spin_lock_irqsave(&port->sc_port.lock, flags); - if (status & SAL_CONSOLE_INTR_RECV) { - sn_receive_chars(port, flags); - } - if (status & SAL_CONSOLE_INTR_XMIT) { - sn_transmit_chars(port, TRANSMIT_BUFFERED); - } - spin_unlock_irqrestore(&port->sc_port.lock, flags); - return IRQ_HANDLED; -} - -/** - * sn_sal_timer_poll - this function handles polled console mode - * @data: A pointer to our sn_cons_port (which contains the uart port) - * - * data is the pointer that init_timer will store for us. This function is - * associated with init_timer to see if there is any console traffic. - * Obviously not used in interrupt mode - * - */ -static void sn_sal_timer_poll(unsigned long data) -{ - struct sn_cons_port *port = (struct sn_cons_port *)data; - unsigned long flags; - - if (!port) - return; - - if (!port->sc_port.irq) { - spin_lock_irqsave(&port->sc_port.lock, flags); - if (sn_process_input) - sn_receive_chars(port, flags); - sn_transmit_chars(port, TRANSMIT_RAW); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - mod_timer(&port->sc_timer, - jiffies + port->sc_interrupt_timeout); - } -} - -/* - * Boot-time initialization code - */ - -/** - * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch) - * @port: Our sn_cons_port (which contains the uart port) - * - * So this is used by sn_sal_serial_console_init (early on, before we're - * registered with serial core). It's also used by sn_sal_module_init - * right after we've registered with serial core. The later only happens - * if we didn't already come through here via sn_sal_serial_console_init. - * - */ -static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port) -{ - unsigned long flags; - - if (!port) - return; - - DPRINTF("sn_console: about to switch to asynchronous console\n"); - - /* without early_printk, we may be invoked late enough to race - * with other cpus doing console IO at this point, however - * console interrupts will never be enabled */ - spin_lock_irqsave(&port->sc_port.lock, flags); - - /* early_printk invocation may have done this for us */ - if (!port->sc_ops) - port->sc_ops = &poll_ops; - - /* we can't turn on the console interrupt (as request_irq - * calls kmalloc, which isn't set up yet), so we rely on a - * timer to poll for input and push data from the console - * buffer. - */ - init_timer(&port->sc_timer); - port->sc_timer.function = sn_sal_timer_poll; - port->sc_timer.data = (unsigned long)port; - - if (IS_RUNNING_ON_SIMULATOR()) - port->sc_interrupt_timeout = 6; - else { - /* 960cps / 16 char FIFO = 60HZ - * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */ - port->sc_interrupt_timeout = - HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; - } - mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout); - - port->sc_is_asynch = 1; - spin_unlock_irqrestore(&port->sc_port.lock, flags); -} - -/** - * sn_sal_switch_to_interrupts - Switch to interrupt driven mode - * @port: Our sn_cons_port (which contains the uart port) - * - * In sn_sal_module_init, after we're registered with serial core and - * the port is added, this function is called to switch us to interrupt - * mode. We were previously in asynch/polling mode (using init_timer). - * - * We attempt to switch to interrupt mode here by calling - * request_irq. If that works out, we enable receive interrupts. - */ -static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) -{ - unsigned long flags; - - if (port) { - DPRINTF("sn_console: switching to interrupt driven console\n"); - - if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, - IRQF_DISABLED | IRQF_SHARED, - "SAL console driver", port) >= 0) { - spin_lock_irqsave(&port->sc_port.lock, flags); - port->sc_port.irq = SGI_UART_VECTOR; - port->sc_ops = &intr_ops; - - /* turn on receive interrupts */ - ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - } - else { - printk(KERN_INFO - "sn_console: console proceeding in polled mode\n"); - } - } -} - -/* - * Kernel console definitions - */ - -static void sn_sal_console_write(struct console *, const char *, unsigned); -static int sn_sal_console_setup(struct console *, char *); -static struct uart_driver sal_console_uart; -extern struct tty_driver *uart_console_device(struct console *, int *); - -static struct console sal_console = { - .name = DEVICE_NAME, - .write = sn_sal_console_write, - .device = uart_console_device, - .setup = sn_sal_console_setup, - .index = -1, /* unspecified */ - .data = &sal_console_uart, -}; - -#define SAL_CONSOLE &sal_console - -static struct uart_driver sal_console_uart = { - .owner = THIS_MODULE, - .driver_name = "sn_console", - .dev_name = DEVICE_NAME, - .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */ - .minor = 0, - .nr = 1, /* one port */ - .cons = SAL_CONSOLE, -}; - -/** - * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core - * - * Before this is called, we've been printing kernel messages in a special - * early mode not making use of the serial core infrastructure. When our - * driver is loaded for real, we register the driver and port with serial - * core and try to enable interrupt driven mode. - * - */ -static int __init sn_sal_module_init(void) -{ - int retval; - - if (!ia64_platform_is("sn2")) - return 0; - - printk(KERN_INFO "sn_console: Console driver init\n"); - - if (USE_DYNAMIC_MINOR == 1) { - misc.minor = MISC_DYNAMIC_MINOR; - misc.name = DEVICE_NAME_DYNAMIC; - retval = misc_register(&misc); - if (retval != 0) { - printk(KERN_WARNING "Failed to register console " - "device using misc_register.\n"); - return -ENODEV; - } - sal_console_uart.major = MISC_MAJOR; - sal_console_uart.minor = misc.minor; - } else { - sal_console_uart.major = DEVICE_MAJOR; - sal_console_uart.minor = DEVICE_MINOR; - } - - /* We register the driver and the port before switching to interrupts - * or async above so the proper uart structures are populated */ - - if (uart_register_driver(&sal_console_uart) < 0) { - printk - ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n", - __LINE__); - return -ENODEV; - } - - spin_lock_init(&sal_console_port.sc_port.lock); - - /* Setup the port struct with the minimum needed */ - sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */ - sal_console_port.sc_port.type = PORT_16550A; - sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS; - sal_console_port.sc_port.ops = &sn_console_ops; - sal_console_port.sc_port.line = 0; - - if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { - /* error - not sure what I'd do - so I'll do nothing */ - printk(KERN_ERR "%s: unable to add port\n", __func__); - } - - /* when this driver is compiled in, the console initialization - * will have already switched us into asynchronous operation - * before we get here through the module initcalls */ - if (!sal_console_port.sc_is_asynch) { - sn_sal_switch_to_asynch(&sal_console_port); - } - - /* at this point (module_init) we can try to turn on interrupts */ - if (!IS_RUNNING_ON_SIMULATOR()) { - sn_sal_switch_to_interrupts(&sal_console_port); - } - sn_process_input = 1; - return 0; -} - -/** - * sn_sal_module_exit - When we're unloaded, remove the driver/port - * - */ -static void __exit sn_sal_module_exit(void) -{ - del_timer_sync(&sal_console_port.sc_timer); - uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port); - uart_unregister_driver(&sal_console_uart); - misc_deregister(&misc); -} - -module_init(sn_sal_module_init); -module_exit(sn_sal_module_exit); - -/** - * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required - * @puts_raw : puts function to do the writing - * @s: input string - * @count: length - * - * We need a \r ahead of every \n for direct writes through - * ia64_sn_console_putb (what sal_puts_raw below actually does). - * - */ - -static void puts_raw_fixed(int (*puts_raw) (const char *s, int len), - const char *s, int count) -{ - const char *s1; - - /* Output '\r' before each '\n' */ - while ((s1 = memchr(s, '\n', count)) != NULL) { - puts_raw(s, s1 - s); - puts_raw("\r\n", 2); - count -= s1 + 1 - s; - s = s1 + 1; - } - puts_raw(s, count); -} - -/** - * sn_sal_console_write - Print statements before serial core available - * @console: Console to operate on - we ignore since we have just one - * @s: String to send - * @count: length - * - * This is referenced in the console struct. It is used for early - * console printing before we register with serial core and for things - * such as kdb. The console_lock must be held when we get here. - * - * This function has some code for trying to print output even if the lock - * is held. We try to cover the case where a lock holder could have died. - * We don't use this special case code if we're not registered with serial - * core yet. After we're registered with serial core, the only time this - * function would be used is for high level kernel output like magic sys req, - * kdb, and printk's. - */ -static void -sn_sal_console_write(struct console *co, const char *s, unsigned count) -{ - unsigned long flags = 0; - struct sn_cons_port *port = &sal_console_port; - static int stole_lock = 0; - - BUG_ON(!port->sc_is_asynch); - - /* We can't look at the xmit buffer if we're not registered with serial core - * yet. So only do the fancy recovery after registering - */ - if (!port->sc_port.state) { - /* Not yet registered with serial core - simple case */ - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - return; - } - - /* somebody really wants this output, might be an - * oops, kdb, panic, etc. make sure they get it. */ - if (spin_is_locked(&port->sc_port.lock)) { - int lhead = port->sc_port.state->xmit.head; - int ltail = port->sc_port.state->xmit.tail; - int counter, got_lock = 0; - - /* - * We attempt to determine if someone has died with the - * lock. We wait ~20 secs after the head and tail ptrs - * stop moving and assume the lock holder is not functional - * and plow ahead. If the lock is freed within the time out - * period we re-get the lock and go ahead normally. We also - * remember if we have plowed ahead so that we don't have - * to wait out the time out period again - the asumption - * is that we will time out again. - */ - - for (counter = 0; counter < 150; mdelay(125), counter++) { - if (!spin_is_locked(&port->sc_port.lock) - || stole_lock) { - if (!stole_lock) { - spin_lock_irqsave(&port->sc_port.lock, - flags); - got_lock = 1; - } - break; - } else { - /* still locked */ - if ((lhead != port->sc_port.state->xmit.head) - || (ltail != - port->sc_port.state->xmit.tail)) { - lhead = - port->sc_port.state->xmit.head; - ltail = - port->sc_port.state->xmit.tail; - counter = 0; - } - } - } - /* flush anything in the serial core xmit buffer, raw */ - sn_transmit_chars(port, 1); - if (got_lock) { - spin_unlock_irqrestore(&port->sc_port.lock, flags); - stole_lock = 0; - } else { - /* fell thru */ - stole_lock = 1; - } - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - } else { - stole_lock = 0; - spin_lock_irqsave(&port->sc_port.lock, flags); - sn_transmit_chars(port, 1); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - } -} - - -/** - * sn_sal_console_setup - Set up console for early printing - * @co: Console to work with - * @options: Options to set - * - * Altix console doesn't do anything with baud rates, etc, anyway. - * - * This isn't required since not providing the setup function in the - * console struct is ok. However, other patches like KDB plop something - * here so providing it is easier. - * - */ -static int sn_sal_console_setup(struct console *co, char *options) -{ - return 0; -} - -/** - * sn_sal_console_write_early - simple early output routine - * @co - console struct - * @s - string to print - * @count - count - * - * Simple function to provide early output, before even - * sn_sal_serial_console_init is called. Referenced in the - * console struct registerd in sn_serial_console_early_setup. - * - */ -static void __init -sn_sal_console_write_early(struct console *co, const char *s, unsigned count) -{ - puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count); -} - -/* Used for very early console printing - again, before - * sn_sal_serial_console_init is run */ -static struct console sal_console_early __initdata = { - .name = "sn_sal", - .write = sn_sal_console_write_early, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/** - * sn_serial_console_early_setup - Sets up early console output support - * - * Register a console early on... This is for output before even - * sn_sal_serial_cosnole_init is called. This function is called from - * setup.c. This allows us to do really early polled writes. When - * sn_sal_serial_console_init is called, this console is unregistered - * and a new one registered. - */ -int __init sn_serial_console_early_setup(void) -{ - if (!ia64_platform_is("sn2")) - return -1; - - sal_console_port.sc_ops = &poll_ops; - spin_lock_init(&sal_console_port.sc_port.lock); - early_sn_setup(); /* Find SAL entry points */ - register_console(&sal_console_early); - - return 0; -} - -/** - * sn_sal_serial_console_init - Early console output - set up for register - * - * This function is called when regular console init happens. Because we - * support even earlier console output with sn_serial_console_early_setup - * (called from setup.c directly), this function unregisters the really - * early console. - * - * Note: Even if setup.c doesn't register sal_console_early, unregistering - * it here doesn't hurt anything. - * - */ -static int __init sn_sal_serial_console_init(void) -{ - if (ia64_platform_is("sn2")) { - sn_sal_switch_to_asynch(&sal_console_port); - DPRINTF("sn_sal_serial_console_init : register console\n"); - register_console(&sal_console); - unregister_console(&sal_console_early); - } - return 0; -} - -console_initcall(sn_sal_serial_console_init); diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c deleted file mode 100644 index 6381a02..0000000 --- a/drivers/serial/suncore.c +++ /dev/null @@ -1,247 +0,0 @@ -/* suncore.c - * - * Common SUN serial routines. Based entirely - * upon drivers/sbus/char/sunserial.c which is: - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adaptation to new UART layer is: - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "suncore.h" - -static int sunserial_current_minor = 64; - -int sunserial_register_minors(struct uart_driver *drv, int count) -{ - int err = 0; - - drv->minor = sunserial_current_minor; - drv->nr += count; - /* Register the driver on the first call */ - if (drv->nr == count) - err = uart_register_driver(drv); - if (err == 0) { - sunserial_current_minor += count; - drv->tty_driver->name_base = drv->minor - 64; - } - return err; -} -EXPORT_SYMBOL(sunserial_register_minors); - -void sunserial_unregister_minors(struct uart_driver *drv, int count) -{ - drv->nr -= count; - sunserial_current_minor -= count; - - if (drv->nr == 0) - uart_unregister_driver(drv); -} -EXPORT_SYMBOL(sunserial_unregister_minors); - -int sunserial_console_match(struct console *con, struct device_node *dp, - struct uart_driver *drv, int line, bool ignore_line) -{ - if (!con) - return 0; - - drv->cons = con; - - if (of_console_device != dp) - return 0; - - if (!ignore_line) { - int off = 0; - - if (of_console_options && - *of_console_options == 'b') - off = 1; - - if ((line & 1) != off) - return 0; - } - - if (!console_set_on_cmdline) { - con->index = line; - add_preferred_console(con->name, line, NULL); - } - return 1; -} -EXPORT_SYMBOL(sunserial_console_match); - -void sunserial_console_termios(struct console *con, struct device_node *uart_dp) -{ - const char *mode, *s; - char mode_prop[] = "ttyX-mode"; - int baud, bits, stop, cflag; - char parity; - - if (!strcmp(uart_dp->name, "rsc") || - !strcmp(uart_dp->name, "rsc-console") || - !strcmp(uart_dp->name, "rsc-control")) { - mode = of_get_property(uart_dp, - "ssp-console-modes", NULL); - if (!mode) - mode = "115200,8,n,1,-"; - } else if (!strcmp(uart_dp->name, "lom-console")) { - mode = "9600,8,n,1,-"; - } else { - struct device_node *dp; - char c; - - c = 'a'; - if (of_console_options) - c = *of_console_options; - - mode_prop[3] = c; - - dp = of_find_node_by_path("/options"); - mode = of_get_property(dp, mode_prop, NULL); - if (!mode) - mode = "9600,8,n,1,-"; - } - - cflag = CREAD | HUPCL | CLOCAL; - - s = mode; - baud = simple_strtoul(s, NULL, 0); - s = strchr(s, ','); - bits = simple_strtoul(++s, NULL, 0); - s = strchr(s, ','); - parity = *(++s); - s = strchr(s, ','); - stop = simple_strtoul(++s, NULL, 0); - s = strchr(s, ','); - /* XXX handshake is not handled here. */ - - switch (baud) { - case 150: cflag |= B150; break; - case 300: cflag |= B300; break; - case 600: cflag |= B600; break; - case 1200: cflag |= B1200; break; - case 2400: cflag |= B2400; break; - case 4800: cflag |= B4800; break; - case 9600: cflag |= B9600; break; - case 19200: cflag |= B19200; break; - case 38400: cflag |= B38400; break; - case 57600: cflag |= B57600; break; - case 115200: cflag |= B115200; break; - case 230400: cflag |= B230400; break; - case 460800: cflag |= B460800; break; - default: baud = 9600; cflag |= B9600; break; - } - - switch (bits) { - case 5: cflag |= CS5; break; - case 6: cflag |= CS6; break; - case 7: cflag |= CS7; break; - case 8: cflag |= CS8; break; - default: cflag |= CS8; break; - } - - switch (parity) { - case 'o': cflag |= (PARENB | PARODD); break; - case 'e': cflag |= PARENB; break; - case 'n': default: break; - } - - switch (stop) { - case 2: cflag |= CSTOPB; break; - case 1: default: break; - } - - con->cflag = cflag; -} - -/* Sun serial MOUSE auto baud rate detection. */ -static struct mouse_baud_cflag { - int baud; - unsigned int cflag; -} mouse_baud_table[] = { - { 1200, B1200 }, - { 2400, B2400 }, - { 4800, B4800 }, - { 9600, B9600 }, - { -1, ~0 }, - { -1, ~0 }, -}; - -unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) -{ - int i; - - for (i = 0; mouse_baud_table[i].baud != -1; i++) - if (mouse_baud_table[i].cflag == (cflag & CBAUD)) - break; - - i += 1; - if (mouse_baud_table[i].baud == -1) - i = 0; - - *new_baud = mouse_baud_table[i].baud; - return mouse_baud_table[i].cflag; -} - -EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); - -/* Basically, when the baud rate is wrong the mouse spits out - * breaks to us. - */ -int suncore_mouse_baud_detection(unsigned char ch, int is_break) -{ - static int mouse_got_break = 0; - static int ctr = 0; - - if (is_break) { - /* Let a few normal bytes go by before we jump the gun - * and say we need to try another baud rate. - */ - if (mouse_got_break && ctr < 8) - return 1; - - /* Ok, we need to try another baud. */ - ctr = 0; - mouse_got_break = 1; - return 2; - } - if (mouse_got_break) { - ctr++; - if (ch == 0x87) { - /* Correct baud rate determined. */ - mouse_got_break = 0; - } - return 1; - } - return 0; -} - -EXPORT_SYMBOL(suncore_mouse_baud_detection); - -static int __init suncore_init(void) -{ - return 0; -} - -static void __exit suncore_exit(void) -{ -} - -module_init(suncore_init); -module_exit(suncore_exit); - -MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); -MODULE_DESCRIPTION("Sun serial common layer"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h deleted file mode 100644 index db20579..0000000 --- a/drivers/serial/suncore.h +++ /dev/null @@ -1,33 +0,0 @@ -/* suncore.h - * - * Generic SUN serial/kbd/ms layer. Based entirely - * upon drivers/sbus/char/sunserial.h which is: - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Port to new UART layer is: - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ - -#ifndef _SERIAL_SUN_H -#define _SERIAL_SUN_H - -/* Serial keyboard defines for L1-A processing... */ -#define SUNKBD_RESET 0xff -#define SUNKBD_L1 0x01 -#define SUNKBD_UP 0x80 -#define SUNKBD_A 0x4d - -extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); -extern int suncore_mouse_baud_detection(unsigned char, int); - -extern int sunserial_register_minors(struct uart_driver *, int); -extern void sunserial_unregister_minors(struct uart_driver *, int); - -extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int, bool); -extern void sunserial_console_termios(struct console *, - struct device_node *); - -#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c deleted file mode 100644 index c901486..0000000 --- a/drivers/serial/sunhv.c +++ /dev/null @@ -1,661 +0,0 @@ -/* sunhv.c: Serial driver for SUN4V hypervisor console. - * - * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#if defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" - -#define CON_BREAK ((long)-1) -#define CON_HUP ((long)-2) - -#define IGNORE_BREAK 0x1 -#define IGNORE_ALL 0x2 - -static char *con_write_page; -static char *con_read_page; - -static int hung_up = 0; - -static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) -{ - while (!uart_circ_empty(xmit)) { - long status = sun4v_con_putchar(xmit->buf[xmit->tail]); - - if (status != HV_EOK) - break; - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } -} - -static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) -{ - while (!uart_circ_empty(xmit)) { - unsigned long ra = __pa(xmit->buf + xmit->tail); - unsigned long len, status, sent; - - len = CIRC_CNT_TO_END(xmit->head, xmit->tail, - UART_XMIT_SIZE); - status = sun4v_con_write(ra, len, &sent); - if (status != HV_EOK) - break; - xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); - port->icount.tx += sent; - } -} - -static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) -{ - int saw_console_brk = 0; - int limit = 10000; - - while (limit-- > 0) { - long status; - long c = sun4v_con_getchar(&status); - - if (status == HV_EWOULDBLOCK) - break; - - if (c == CON_BREAK) { - if (uart_handle_break(port)) - continue; - saw_console_brk = 1; - c = 0; - } - - if (c == CON_HUP) { - hung_up = 1; - uart_handle_dcd_change(port, 0); - } else if (hung_up) { - hung_up = 0; - uart_handle_dcd_change(port, 1); - } - - if (tty == NULL) { - uart_handle_sysrq_char(port, c); - continue; - } - - port->icount.rx++; - - if (uart_handle_sysrq_char(port, c)) - continue; - - tty_insert_flip_char(tty, c, TTY_NORMAL); - } - - return saw_console_brk; -} - -static int receive_chars_read(struct uart_port *port, struct tty_struct *tty) -{ - int saw_console_brk = 0; - int limit = 10000; - - while (limit-- > 0) { - unsigned long ra = __pa(con_read_page); - unsigned long bytes_read, i; - long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); - - if (stat != HV_EOK) { - bytes_read = 0; - - if (stat == CON_BREAK) { - if (uart_handle_break(port)) - continue; - saw_console_brk = 1; - *con_read_page = 0; - bytes_read = 1; - } else if (stat == CON_HUP) { - hung_up = 1; - uart_handle_dcd_change(port, 0); - continue; - } else { - /* HV_EWOULDBLOCK, etc. */ - break; - } - } - - if (hung_up) { - hung_up = 0; - uart_handle_dcd_change(port, 1); - } - - for (i = 0; i < bytes_read; i++) - uart_handle_sysrq_char(port, con_read_page[i]); - - if (tty == NULL) - continue; - - port->icount.rx += bytes_read; - - tty_insert_flip_string(tty, con_read_page, bytes_read); - } - - return saw_console_brk; -} - -struct sunhv_ops { - void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); - int (*receive_chars)(struct uart_port *port, struct tty_struct *tty); -}; - -static struct sunhv_ops bychar_ops = { - .transmit_chars = transmit_chars_putchar, - .receive_chars = receive_chars_getchar, -}; - -static struct sunhv_ops bywrite_ops = { - .transmit_chars = transmit_chars_write, - .receive_chars = receive_chars_read, -}; - -static struct sunhv_ops *sunhv_ops = &bychar_ops; - -static struct tty_struct *receive_chars(struct uart_port *port) -{ - struct tty_struct *tty = NULL; - - if (port->state != NULL) /* Unopened serial console */ - tty = port->state->port.tty; - - if (sunhv_ops->receive_chars(port, tty)) - sun_do_break(); - - return tty; -} - -static void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - - if (!port->state) - return; - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - sunhv_ops->transmit_chars(port, xmit); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t sunhv_interrupt(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - tty = receive_chars(port); - transmit_chars(port); - spin_unlock_irqrestore(&port->lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sunhv_tx_empty(struct uart_port *port) -{ - /* Transmitter is always empty for us. If the circ buffer - * is non-empty or there is an x_char pending, our caller - * will do the right thing and ignore what we return here. - */ - return TIOCSER_TEMT; -} - -/* port->lock held by caller. */ -static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - return; -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sunhv_get_mctrl(struct uart_port *port) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; -} - -/* port->lock held by caller. */ -static void sunhv_stop_tx(struct uart_port *port) -{ - return; -} - -/* port->lock held by caller. */ -static void sunhv_start_tx(struct uart_port *port) -{ - transmit_chars(port); -} - -/* port->lock is not held. */ -static void sunhv_send_xchar(struct uart_port *port, char ch) -{ - unsigned long flags; - int limit = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - long status = sun4v_con_putchar(ch); - if (status == HV_EOK) - break; - udelay(1); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* port->lock held by caller. */ -static void sunhv_stop_rx(struct uart_port *port) -{ -} - -/* port->lock held by caller. */ -static void sunhv_enable_ms(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sunhv_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state) { - unsigned long flags; - int limit = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - long status = sun4v_con_putchar(CON_BREAK); - if (status == HV_EOK) - break; - udelay(1); - } - - spin_unlock_irqrestore(&port->lock, flags); - } -} - -/* port->lock is not held. */ -static int sunhv_startup(struct uart_port *port) -{ - return 0; -} - -/* port->lock is not held. */ -static void sunhv_shutdown(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - unsigned int iflag, cflag; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - iflag = termios->c_iflag; - cflag = termios->c_cflag; - - port->ignore_status_mask = 0; - if (iflag & IGNBRK) - port->ignore_status_mask |= IGNORE_BREAK; - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= IGNORE_ALL; - - /* XXX */ - uart_update_timeout(port, cflag, - (port->uartclk / (16 * quot))); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *sunhv_type(struct uart_port *port) -{ - return "SUN4V HCONS"; -} - -static void sunhv_release_port(struct uart_port *port) -{ -} - -static int sunhv_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunhv_config_port(struct uart_port *port, int flags) -{ -} - -static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sunhv_pops = { - .tx_empty = sunhv_tx_empty, - .set_mctrl = sunhv_set_mctrl, - .get_mctrl = sunhv_get_mctrl, - .stop_tx = sunhv_stop_tx, - .start_tx = sunhv_start_tx, - .send_xchar = sunhv_send_xchar, - .stop_rx = sunhv_stop_rx, - .enable_ms = sunhv_enable_ms, - .break_ctl = sunhv_break_ctl, - .startup = sunhv_startup, - .shutdown = sunhv_shutdown, - .set_termios = sunhv_set_termios, - .type = sunhv_type, - .release_port = sunhv_release_port, - .request_port = sunhv_request_port, - .config_port = sunhv_config_port, - .verify_port = sunhv_verify_port, -}; - -static struct uart_driver sunhv_reg = { - .owner = THIS_MODULE, - .driver_name = "sunhv", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static struct uart_port *sunhv_port; - -/* Copy 's' into the con_write_page, decoding "\n" into - * "\r\n" along the way. We have to return two lengths - * because the caller needs to know how much to advance - * 's' and also how many bytes to output via con_write_page. - */ -static int fill_con_write_page(const char *s, unsigned int n, - unsigned long *page_bytes) -{ - const char *orig_s = s; - char *p = con_write_page; - int left = PAGE_SIZE; - - while (n--) { - if (*s == '\n') { - if (left < 2) - break; - *p++ = '\r'; - left--; - } else if (left < 1) - break; - *p++ = *s++; - left--; - } - *page_bytes = p - con_write_page; - return s - orig_s; -} - -static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sunhv_port; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (port->sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else - spin_lock(&port->lock); - - while (n > 0) { - unsigned long ra = __pa(con_write_page); - unsigned long page_bytes; - unsigned int cpy = fill_con_write_page(s, n, - &page_bytes); - - n -= cpy; - s += cpy; - while (page_bytes > 0) { - unsigned long written; - int limit = 1000000; - - while (limit--) { - unsigned long stat; - - stat = sun4v_con_write(ra, page_bytes, - &written); - if (stat == HV_EOK) - break; - udelay(1); - } - if (limit < 0) - break; - page_bytes -= written; - ra += written; - } - } - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -static inline void sunhv_console_putchar(struct uart_port *port, char c) -{ - int limit = 1000000; - - while (limit-- > 0) { - long status = sun4v_con_putchar(c); - if (status == HV_EOK) - break; - udelay(1); - } -} - -static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sunhv_port; - unsigned long flags; - int i, locked = 1; - - local_irq_save(flags); - if (port->sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else - spin_lock(&port->lock); - - for (i = 0; i < n; i++) { - if (*s == '\n') - sunhv_console_putchar(port, '\r'); - sunhv_console_putchar(port, *s++); - } - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -static struct console sunhv_console = { - .name = "ttyHV", - .write = sunhv_console_write_bychar, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunhv_reg, -}; - -static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match) -{ - struct uart_port *port; - unsigned long minor; - int err; - - if (op->archdata.irqs[0] == 0xffffffff) - return -ENODEV; - - port = kzalloc(sizeof(struct uart_port), GFP_KERNEL); - if (unlikely(!port)) - return -ENOMEM; - - minor = 1; - if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && - minor >= 1) { - err = -ENOMEM; - con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!con_write_page) - goto out_free_port; - - con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!con_read_page) - goto out_free_con_write_page; - - sunhv_console.write = sunhv_console_write_paged; - sunhv_ops = &bywrite_ops; - } - - sunhv_port = port; - - port->line = 0; - port->ops = &sunhv_pops; - port->type = PORT_SUNHV; - port->uartclk = ( 29491200 / 16 ); /* arbitrary */ - - port->membase = (unsigned char __iomem *) __pa(port); - - port->irq = op->archdata.irqs[0]; - - port->dev = &op->dev; - - err = sunserial_register_minors(&sunhv_reg, 1); - if (err) - goto out_free_con_read_page; - - sunserial_console_match(&sunhv_console, op->dev.of_node, - &sunhv_reg, port->line, false); - - err = uart_add_one_port(&sunhv_reg, port); - if (err) - goto out_unregister_driver; - - err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port); - if (err) - goto out_remove_port; - - dev_set_drvdata(&op->dev, port); - - return 0; - -out_remove_port: - uart_remove_one_port(&sunhv_reg, port); - -out_unregister_driver: - sunserial_unregister_minors(&sunhv_reg, 1); - -out_free_con_read_page: - kfree(con_read_page); - -out_free_con_write_page: - kfree(con_write_page); - -out_free_port: - kfree(port); - sunhv_port = NULL; - return err; -} - -static int __devexit hv_remove(struct platform_device *dev) -{ - struct uart_port *port = dev_get_drvdata(&dev->dev); - - free_irq(port->irq, port); - - uart_remove_one_port(&sunhv_reg, port); - - sunserial_unregister_minors(&sunhv_reg, 1); - - kfree(port); - sunhv_port = NULL; - - dev_set_drvdata(&dev->dev, NULL); - - return 0; -} - -static const struct of_device_id hv_match[] = { - { - .name = "console", - .compatible = "qcn", - }, - { - .name = "console", - .compatible = "SUNW,sun4v-console", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, hv_match); - -static struct of_platform_driver hv_driver = { - .driver = { - .name = "hv", - .owner = THIS_MODULE, - .of_match_table = hv_match, - }, - .probe = hv_probe, - .remove = __devexit_p(hv_remove), -}; - -static int __init sunhv_init(void) -{ - if (tlb_type != hypervisor) - return -ENODEV; - - return of_register_platform_driver(&hv_driver); -} - -static void __exit sunhv_exit(void) -{ - of_unregister_platform_driver(&hv_driver); -} - -module_init(sunhv_init); -module_exit(sunhv_exit); - -MODULE_AUTHOR("David S. Miller"); -MODULE_DESCRIPTION("SUN4V Hypervisor console driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c deleted file mode 100644 index 5b246b1..0000000 --- a/drivers/serial/sunsab.c +++ /dev/null @@ -1,1152 +0,0 @@ -/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) - * - * Rewrote buffer handling to use CIRC(Circular Buffer) macros. - * Maxim Krasnyanskiy - * - * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud - * rates to be programmed into the UART. Also eliminated a lot of - * duplicated code in the console setup. - * Theodore Ts'o , 2001-Oct-12 - * - * Ported to new 2.5.x UART layer. - * David S. Miller - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" -#include "sunsab.h" - -struct uart_sunsab_port { - struct uart_port port; /* Generic UART port */ - union sab82532_async_regs __iomem *regs; /* Chip registers */ - unsigned long irqflags; /* IRQ state flags */ - int dsr; /* Current DSR state */ - unsigned int cec_timeout; /* Chip poll timeout... */ - unsigned int tec_timeout; /* likewise */ - unsigned char interrupt_mask0;/* ISR0 masking */ - unsigned char interrupt_mask1;/* ISR1 masking */ - unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ - unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ - unsigned int gis_shift; - int type; /* SAB82532 version */ - - /* Setting configuration bits while the transmitter is active - * can cause garbage characters to get emitted by the chip. - * Therefore, we cache such writes here and do the real register - * write the next time the transmitter becomes idle. - */ - unsigned int cached_ebrg; - unsigned char cached_mode; - unsigned char cached_pvr; - unsigned char cached_dafo; -}; - -/* - * This assumes you have a 29.4912 MHz clock for your UART. - */ -#define SAB_BASE_BAUD ( 29491200 / 16 ) - -static char *sab82532_version[16] = { - "V1.0", "V2.0", "V3.2", "V(0x03)", - "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", - "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", - "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" -}; - -#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ -#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ - -#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ -#define SAB82532_XMIT_FIFO_SIZE 32 - -static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) -{ - int timeout = up->tec_timeout; - - while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) - udelay(1); -} - -static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) -{ - int timeout = up->cec_timeout; - - while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) - udelay(1); -} - -static struct tty_struct * -receive_chars(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - struct tty_struct *tty = NULL; - unsigned char buf[32]; - int saw_console_brk = 0; - int free_fifo = 0; - int count = 0; - int i; - - if (up->port.state != NULL) /* Unopened serial console */ - tty = up->port.state->port.tty; - - /* Read number of BYTES (Character + Status) available. */ - if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { - count = SAB82532_RECV_FIFO_SIZE; - free_fifo++; - } - - if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { - count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); - free_fifo++; - } - - /* Issue a FIFO read command in case we where idle. */ - if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); - return tty; - } - - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - free_fifo++; - - /* Read the FIFO. */ - for (i = 0; i < count; i++) - buf[i] = readb(&up->regs->r.rfifo[i]); - - /* Issue Receive Message Complete command. */ - if (free_fifo) { - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); - } - - /* Count may be zero for BRK, so we check for it here */ - if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && - (up->port.line == up->port.cons->index)) - saw_console_brk = 1; - - for (i = 0; i < count; i++) { - unsigned char ch = buf[i], flag; - - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR | - SAB82532_ISR0_RFO)) || - unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { - /* - * For statistics only - */ - if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { - stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - continue; - } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) - up->port.icount.parity++; - else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) - up->port.icount.frame++; - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); - stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); - - if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { - flag = TTY_BREAK; - } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) - flag = TTY_PARITY; - else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && - (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) - tty_insert_flip_char(tty, ch, flag); - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - if (saw_console_brk) - sun_do_break(); - - return tty; -} - -static void sunsab_stop_tx(struct uart_port *); -static void sunsab_tx_idle(struct uart_sunsab_port *); - -static void transmit_chars(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int i; - - if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { - up->interrupt_mask1 |= SAB82532_IMR1_ALLS; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - set_bit(SAB82532_ALLS, &up->irqflags); - } - -#if 0 /* bde@nwlink.com says this check causes problems */ - if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) - return; -#endif - - if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) - return; - - set_bit(SAB82532_XPR, &up->irqflags); - sunsab_tx_idle(up); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - up->interrupt_mask1 |= SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - return; - } - - up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - clear_bit(SAB82532_ALLS, &up->irqflags); - - /* Stuff 32 bytes into Transmit FIFO. */ - clear_bit(SAB82532_XPR, &up->irqflags); - for (i = 0; i < up->port.fifosize; i++) { - writeb(xmit->buf[xmit->tail], - &up->regs->w.xfifo[i]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Issue a Transmit Frame command. */ - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - sunsab_stop_tx(&up->port); -} - -static void check_status(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) - uart_handle_dcd_change(&up->port, - !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); - - if (stat->sreg.isr1 & SAB82532_ISR1_CSC) - uart_handle_cts_change(&up->port, - (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); - - if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { - up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; - up->port.icount.dsr++; - } - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -static irqreturn_t sunsab_interrupt(int irq, void *dev_id) -{ - struct uart_sunsab_port *up = dev_id; - struct tty_struct *tty; - union sab82532_irq_status status; - unsigned long flags; - unsigned char gis; - - spin_lock_irqsave(&up->port.lock, flags); - - status.stat = 0; - gis = readb(&up->regs->r.gis) >> up->gis_shift; - if (gis & 1) - status.sreg.isr0 = readb(&up->regs->r.isr0); - if (gis & 2) - status.sreg.isr1 = readb(&up->regs->r.isr1); - - tty = NULL; - if (status.stat) { - if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | - SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || - (status.sreg.isr1 & SAB82532_ISR1_BRK)) - tty = receive_chars(up, &status); - if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || - (status.sreg.isr1 & SAB82532_ISR1_CSC)) - check_status(up, &status); - if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) - transmit_chars(up, &status); - } - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sunsab_tx_empty(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - int ret; - - /* Do not need a lock for a state test like this. */ - if (test_bit(SAB82532_ALLS, &up->irqflags)) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* port->lock held by caller. */ -static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - if (mctrl & TIOCM_RTS) { - up->cached_mode &= ~SAB82532_MODE_FRTS; - up->cached_mode |= SAB82532_MODE_RTS; - } else { - up->cached_mode |= (SAB82532_MODE_FRTS | - SAB82532_MODE_RTS); - } - if (mctrl & TIOCM_DTR) { - up->cached_pvr &= ~(up->pvr_dtr_bit); - } else { - up->cached_pvr |= up->pvr_dtr_bit; - } - - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sunsab_get_mctrl(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned char val; - unsigned int result; - - result = 0; - - val = readb(&up->regs->r.pvr); - result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; - - val = readb(&up->regs->r.vstr); - result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; - - val = readb(&up->regs->r.star); - result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; - - return result; -} - -/* port->lock held by caller. */ -static void sunsab_stop_tx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - up->interrupt_mask1 |= SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); -} - -/* port->lock held by caller. */ -static void sunsab_tx_idle(struct uart_sunsab_port *up) -{ - if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { - u8 tmp; - - clear_bit(SAB82532_REGS_PENDING, &up->irqflags); - writeb(up->cached_mode, &up->regs->rw.mode); - writeb(up->cached_pvr, &up->regs->rw.pvr); - writeb(up->cached_dafo, &up->regs->w.dafo); - - writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); - tmp = readb(&up->regs->rw.ccr2); - tmp &= ~0xc0; - tmp |= (up->cached_ebrg >> 2) & 0xc0; - writeb(tmp, &up->regs->rw.ccr2); - } -} - -/* port->lock held by caller. */ -static void sunsab_start_tx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - struct circ_buf *xmit = &up->port.state->xmit; - int i; - - up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - if (!test_bit(SAB82532_XPR, &up->irqflags)) - return; - - clear_bit(SAB82532_ALLS, &up->irqflags); - clear_bit(SAB82532_XPR, &up->irqflags); - - for (i = 0; i < up->port.fifosize; i++) { - writeb(xmit->buf[xmit->tail], - &up->regs->w.xfifo[i]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Issue a Transmit Frame command. */ - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); -} - -/* port->lock is not held. */ -static void sunsab_send_xchar(struct uart_port *port, char ch) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - sunsab_tec_wait(up); - writeb(ch, &up->regs->w.tic); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* port->lock held by caller. */ -static void sunsab_stop_rx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - up->interrupt_mask0 |= SAB82532_IMR0_TCD; - writeb(up->interrupt_mask1, &up->regs->w.imr0); -} - -/* port->lock held by caller. */ -static void sunsab_enable_ms(struct uart_port *port) -{ - /* For now we always receive these interrupts. */ -} - -/* port->lock is not held. */ -static void sunsab_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned char val; - - spin_lock_irqsave(&up->port.lock, flags); - - val = up->cached_dafo; - if (break_state) - val |= SAB82532_DAFO_XBRK; - else - val &= ~SAB82532_DAFO_XBRK; - up->cached_dafo = val; - - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* port->lock is not held. */ -static int sunsab_startup(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned char tmp; - int err = request_irq(up->port.irq, sunsab_interrupt, - IRQF_SHARED, "sab", up); - if (err) - return err; - - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Wait for any commands or immediate characters - */ - sunsab_cec_wait(up); - sunsab_tec_wait(up); - - /* - * Clear the FIFO buffers. - */ - writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); - - /* - * Clear the interrupt registers. - */ - (void) readb(&up->regs->r.isr0); - (void) readb(&up->regs->r.isr1); - - /* - * Now, initialize the UART - */ - writeb(0, &up->regs->w.ccr0); /* power-down */ - writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | - SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); - writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); - writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | - SAB82532_CCR2_TOE, &up->regs->w.ccr2); - writeb(0, &up->regs->w.ccr3); - writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); - up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | - SAB82532_MODE_RAC); - writeb(up->cached_mode, &up->regs->w.mode); - writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); - - tmp = readb(&up->regs->rw.ccr0); - tmp |= SAB82532_CCR0_PU; /* power-up */ - writeb(tmp, &up->regs->rw.ccr0); - - /* - * Finally, enable interrupts - */ - up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | - SAB82532_IMR0_PLLA); - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | - SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | - SAB82532_IMR1_CSC | SAB82532_IMR1_XON | - SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - set_bit(SAB82532_ALLS, &up->irqflags); - set_bit(SAB82532_XPR, &up->irqflags); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -/* port->lock is not held. */ -static void sunsab_shutdown(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - /* Disable Interrupts */ - up->interrupt_mask0 = 0xff; - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = 0xff; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - /* Disable break condition */ - up->cached_dafo = readb(&up->regs->rw.dafo); - up->cached_dafo &= ~SAB82532_DAFO_XBRK; - writeb(up->cached_dafo, &up->regs->rw.dafo); - - /* Disable Receiver */ - up->cached_mode &= ~SAB82532_MODE_RAC; - writeb(up->cached_mode, &up->regs->rw.mode); - - /* - * XXX FIXME - * - * If the chip is powered down here the system hangs/crashes during - * reboot or shutdown. This needs to be investigated further, - * similar behaviour occurs in 2.4 when the driver is configured - * as a module only. One hint may be that data is sometimes - * transmitted at 9600 baud during shutdown (regardless of the - * speed the chip was configured for when the port was open). - */ -#if 0 - /* Power Down */ - tmp = readb(&up->regs->rw.ccr0); - tmp &= ~SAB82532_CCR0_PU; - writeb(tmp, &up->regs->rw.ccr0); -#endif - - spin_unlock_irqrestore(&up->port.lock, flags); - free_irq(up->port.irq, up); -} - -/* - * This is used to figure out the divisor speeds. - * - * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), - * - * with 0 <= N < 64 and 0 <= M < 16 - */ - -static void calc_ebrg(int baud, int *n_ret, int *m_ret) -{ - int n, m; - - if (baud == 0) { - *n_ret = 0; - *m_ret = 0; - return; - } - - /* - * We scale numbers by 10 so that we get better accuracy - * without having to use floating point. Here we increment m - * until n is within the valid range. - */ - n = (SAB_BASE_BAUD * 10) / baud; - m = 0; - while (n >= 640) { - n = n / 2; - m++; - } - n = (n+5) / 10; - /* - * We try very hard to avoid speeds with M == 0 since they may - * not work correctly for XTAL frequences above 10 MHz. - */ - if ((m == 0) && ((n & 1) == 0)) { - n = n / 2; - m++; - } - *n_ret = n - 1; - *m_ret = m; -} - -/* Internal routine, port->lock is held and local interrupts are disabled. */ -static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, - unsigned int iflag, unsigned int baud, - unsigned int quot) -{ - unsigned char dafo; - int bits, n, m; - - /* Byte size and parity */ - switch (cflag & CSIZE) { - case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; - case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; - case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - } - - if (cflag & CSTOPB) { - dafo |= SAB82532_DAFO_STOP; - bits++; - } - - if (cflag & PARENB) { - dafo |= SAB82532_DAFO_PARE; - bits++; - } - - if (cflag & PARODD) { - dafo |= SAB82532_DAFO_PAR_ODD; - } else { - dafo |= SAB82532_DAFO_PAR_EVEN; - } - up->cached_dafo = dafo; - - calc_ebrg(baud, &n, &m); - - up->cached_ebrg = n | (m << 6); - - up->tec_timeout = (10 * 1000000) / baud; - up->cec_timeout = up->tec_timeout >> 2; - - /* CTS flow control flags */ - /* We encode read_status_mask and ignore_status_mask like so: - * - * --------------------- - * | ... | ISR1 | ISR0 | - * --------------------- - * .. 15 8 7 0 - */ - - up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | - SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | - SAB82532_ISR0_CDSC); - up->port.read_status_mask |= (SAB82532_ISR1_CSC | - SAB82532_ISR1_ALLS | - SAB82532_ISR1_XPR) << 8; - if (iflag & INPCK) - up->port.read_status_mask |= (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - up->port.ignore_status_mask |= SAB82532_ISR0_RFO; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | - SAB82532_ISR0_TCD); - - uart_update_timeout(&up->port, cflag, - (up->port.uartclk / (16 * quot))); - - /* Now schedule a register update when the chip's - * transmitter is idle. - */ - up->cached_mode |= SAB82532_MODE_RAC; - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); -} - -/* port->lock is not held. */ -static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&up->port.lock, flags); - sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *sunsab_type(struct uart_port *port) -{ - struct uart_sunsab_port *up = (void *)port; - static char buf[36]; - - sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); - return buf; -} - -static void sunsab_release_port(struct uart_port *port) -{ -} - -static int sunsab_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunsab_config_port(struct uart_port *port, int flags) -{ -} - -static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sunsab_pops = { - .tx_empty = sunsab_tx_empty, - .set_mctrl = sunsab_set_mctrl, - .get_mctrl = sunsab_get_mctrl, - .stop_tx = sunsab_stop_tx, - .start_tx = sunsab_start_tx, - .send_xchar = sunsab_send_xchar, - .stop_rx = sunsab_stop_rx, - .enable_ms = sunsab_enable_ms, - .break_ctl = sunsab_break_ctl, - .startup = sunsab_startup, - .shutdown = sunsab_shutdown, - .set_termios = sunsab_set_termios, - .type = sunsab_type, - .release_port = sunsab_release_port, - .request_port = sunsab_request_port, - .config_port = sunsab_config_port, - .verify_port = sunsab_verify_port, -}; - -static struct uart_driver sunsab_reg = { - .owner = THIS_MODULE, - .driver_name = "sunsab", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static struct uart_sunsab_port *sunsab_ports; - -#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE - -static void sunsab_console_putchar(struct uart_port *port, int c) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; - - sunsab_tec_wait(up); - writeb(c, &up->regs->w.tic); -} - -static void sunsab_console_write(struct console *con, const char *s, unsigned n) -{ - struct uart_sunsab_port *up = &sunsab_ports[con->index]; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - uart_console_write(&up->port, s, n, sunsab_console_putchar); - sunsab_tec_wait(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int sunsab_console_setup(struct console *con, char *options) -{ - struct uart_sunsab_port *up = &sunsab_ports[con->index]; - unsigned long flags; - unsigned int baud, quot; - - /* - * The console framework calls us for each and every port - * registered. Defer the console setup until the requested - * port has been properly discovered. A bit of a hack, - * though... - */ - if (up->port.type != PORT_SUNSAB) - return -1; - - printk("Console: ttyS%d (SAB82532)\n", - (sunsab_reg.minor - 64) + con->index); - - sunserial_console_termios(con, up->port.dev->of_node); - - switch (con->cflag & CBAUD) { - case B150: baud = 150; break; - case B300: baud = 300; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - default: case B9600: baud = 9600; break; - case B19200: baud = 19200; break; - case B38400: baud = 38400; break; - case B57600: baud = 57600; break; - case B115200: baud = 115200; break; - case B230400: baud = 230400; break; - case B460800: baud = 460800; break; - }; - - /* - * Temporary fix. - */ - spin_lock_init(&up->port.lock); - - /* - * Initialize the hardware - */ - sunsab_startup(&up->port); - - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Finally, enable interrupts - */ - up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | - SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | - SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | - SAB82532_IMR1_CSC | SAB82532_IMR1_XON | - SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - quot = uart_get_divisor(&up->port, baud); - sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); - sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static struct console sunsab_console = { - .name = "ttyS", - .write = sunsab_console_write, - .device = uart_console_device, - .setup = sunsab_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunsab_reg, -}; - -static inline struct console *SUNSAB_CONSOLE(void) -{ - return &sunsab_console; -} -#else -#define SUNSAB_CONSOLE() (NULL) -#define sunsab_console_init() do { } while (0) -#endif - -static int __devinit sunsab_init_one(struct uart_sunsab_port *up, - struct platform_device *op, - unsigned long offset, - int line) -{ - up->port.line = line; - up->port.dev = &op->dev; - - up->port.mapbase = op->resource[0].start + offset; - up->port.membase = of_ioremap(&op->resource[0], offset, - sizeof(union sab82532_async_regs), - "sab"); - if (!up->port.membase) - return -ENOMEM; - up->regs = (union sab82532_async_regs __iomem *) up->port.membase; - - up->port.irq = op->archdata.irqs[0]; - - up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; - up->port.iotype = UPIO_MEM; - - writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); - - up->port.ops = &sunsab_pops; - up->port.type = PORT_SUNSAB; - up->port.uartclk = SAB_BASE_BAUD; - - up->type = readb(&up->regs->r.vstr) & 0x0f; - writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); - writeb(0xff, &up->regs->w.pim); - if ((up->port.line & 0x1) == 0) { - up->pvr_dsr_bit = (1 << 0); - up->pvr_dtr_bit = (1 << 1); - up->gis_shift = 2; - } else { - up->pvr_dsr_bit = (1 << 3); - up->pvr_dtr_bit = (1 << 2); - up->gis_shift = 0; - } - up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); - writeb(up->cached_pvr, &up->regs->w.pvr); - up->cached_mode = readb(&up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_FRTS; - writeb(up->cached_mode, &up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_RTS; - writeb(up->cached_mode, &up->regs->rw.mode); - - up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; - up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; - - return 0; -} - -static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int inst; - struct uart_sunsab_port *up; - int err; - - up = &sunsab_ports[inst * 2]; - - err = sunsab_init_one(&up[0], op, - 0, - (inst * 2) + 0); - if (err) - goto out; - - err = sunsab_init_one(&up[1], op, - sizeof(union sab82532_async_regs), - (inst * 2) + 1); - if (err) - goto out1; - - sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, - &sunsab_reg, up[0].port.line, - false); - - sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, - &sunsab_reg, up[1].port.line, - false); - - err = uart_add_one_port(&sunsab_reg, &up[0].port); - if (err) - goto out2; - - err = uart_add_one_port(&sunsab_reg, &up[1].port); - if (err) - goto out3; - - dev_set_drvdata(&op->dev, &up[0]); - - inst++; - - return 0; - -out3: - uart_remove_one_port(&sunsab_reg, &up[0].port); -out2: - of_iounmap(&op->resource[0], - up[1].port.membase, - sizeof(union sab82532_async_regs)); -out1: - of_iounmap(&op->resource[0], - up[0].port.membase, - sizeof(union sab82532_async_regs)); -out: - return err; -} - -static int __devexit sab_remove(struct platform_device *op) -{ - struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); - - uart_remove_one_port(&sunsab_reg, &up[1].port); - uart_remove_one_port(&sunsab_reg, &up[0].port); - of_iounmap(&op->resource[0], - up[1].port.membase, - sizeof(union sab82532_async_regs)); - of_iounmap(&op->resource[0], - up[0].port.membase, - sizeof(union sab82532_async_regs)); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id sab_match[] = { - { - .name = "se", - }, - { - .name = "serial", - .compatible = "sab82532", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, sab_match); - -static struct of_platform_driver sab_driver = { - .driver = { - .name = "sab", - .owner = THIS_MODULE, - .of_match_table = sab_match, - }, - .probe = sab_probe, - .remove = __devexit_p(sab_remove), -}; - -static int __init sunsab_init(void) -{ - struct device_node *dp; - int err; - int num_channels = 0; - - for_each_node_by_name(dp, "se") - num_channels += 2; - for_each_node_by_name(dp, "serial") { - if (of_device_is_compatible(dp, "sab82532")) - num_channels += 2; - } - - if (num_channels) { - sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * - num_channels, GFP_KERNEL); - if (!sunsab_ports) - return -ENOMEM; - - err = sunserial_register_minors(&sunsab_reg, num_channels); - if (err) { - kfree(sunsab_ports); - sunsab_ports = NULL; - - return err; - } - } - - return of_register_platform_driver(&sab_driver); -} - -static void __exit sunsab_exit(void) -{ - of_unregister_platform_driver(&sab_driver); - if (sunsab_reg.nr) { - sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); - } - - kfree(sunsab_ports); - sunsab_ports = NULL; -} - -module_init(sunsab_init); -module_exit(sunsab_exit); - -MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); -MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h deleted file mode 100644 index b78e1f7..0000000 --- a/drivers/serial/sunsab.h +++ /dev/null @@ -1,322 +0,0 @@ -/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SUNSAB_H -#define _SUNSAB_H - -struct sab82532_async_rd_regs { - u8 rfifo[0x20]; /* Receive FIFO */ - u8 star; /* Status Register */ - u8 __pad1; - u8 mode; /* Mode Register */ - u8 timr; /* Timer Register */ - u8 xon; /* XON Character */ - u8 xoff; /* XOFF Character */ - u8 tcr; /* Termination Character Register */ - u8 dafo; /* Data Format */ - u8 rfc; /* RFIFO Control Register */ - u8 __pad2; - u8 rbcl; /* Receive Byte Count Low */ - u8 rbch; /* Receive Byte Count High */ - u8 ccr0; /* Channel Configuration Register 0 */ - u8 ccr1; /* Channel Configuration Register 1 */ - u8 ccr2; /* Channel Configuration Register 2 */ - u8 ccr3; /* Channel Configuration Register 3 */ - u8 __pad3[4]; - u8 vstr; /* Version Status Register */ - u8 __pad4[3]; - u8 gis; /* Global Interrupt Status */ - u8 ipc; /* Interrupt Port Configuration */ - u8 isr0; /* Interrupt Status 0 */ - u8 isr1; /* Interrupt Status 1 */ - u8 pvr; /* Port Value Register */ - u8 pis; /* Port Interrupt Status */ - u8 pcr; /* Port Configuration Register */ - u8 ccr4; /* Channel Configuration Register 4 */ -}; - -struct sab82532_async_wr_regs { - u8 xfifo[0x20]; /* Transmit FIFO */ - u8 cmdr; /* Command Register */ - u8 __pad1; - u8 mode; - u8 timr; - u8 xon; - u8 xoff; - u8 tcr; - u8 dafo; - u8 rfc; - u8 __pad2; - u8 xbcl; /* Transmit Byte Count Low */ - u8 xbch; /* Transmit Byte Count High */ - u8 ccr0; - u8 ccr1; - u8 ccr2; - u8 ccr3; - u8 tsax; /* Time-Slot Assignment Reg. Transmit */ - u8 tsar; /* Time-Slot Assignment Reg. Receive */ - u8 xccr; /* Transmit Channel Capacity Register */ - u8 rccr; /* Receive Channel Capacity Register */ - u8 bgr; /* Baud Rate Generator Register */ - u8 tic; /* Transmit Immediate Character */ - u8 mxn; /* Mask XON Character */ - u8 mxf; /* Mask XOFF Character */ - u8 iva; /* Interrupt Vector Address */ - u8 ipc; - u8 imr0; /* Interrupt Mask Register 0 */ - u8 imr1; /* Interrupt Mask Register 1 */ - u8 pvr; - u8 pim; /* Port Interrupt Mask */ - u8 pcr; - u8 ccr4; -}; - -struct sab82532_async_rw_regs { /* Read/Write registers */ - u8 __pad1[0x20]; - u8 __pad2; - u8 __pad3; - u8 mode; - u8 timr; - u8 xon; - u8 xoff; - u8 tcr; - u8 dafo; - u8 rfc; - u8 __pad4; - u8 __pad5; - u8 __pad6; - u8 ccr0; - u8 ccr1; - u8 ccr2; - u8 ccr3; - u8 __pad7; - u8 __pad8; - u8 __pad9; - u8 __pad10; - u8 __pad11; - u8 __pad12; - u8 __pad13; - u8 __pad14; - u8 __pad15; - u8 ipc; - u8 __pad16; - u8 __pad17; - u8 pvr; - u8 __pad18; - u8 pcr; - u8 ccr4; -}; - -union sab82532_async_regs { - __volatile__ struct sab82532_async_rd_regs r; - __volatile__ struct sab82532_async_wr_regs w; - __volatile__ struct sab82532_async_rw_regs rw; -}; - -union sab82532_irq_status { - unsigned short stat; - struct { - unsigned char isr0; - unsigned char isr1; - } sreg; -}; - -/* irqflags bits */ -#define SAB82532_ALLS 0x00000001 -#define SAB82532_XPR 0x00000002 -#define SAB82532_REGS_PENDING 0x00000004 - -/* RFIFO Status Byte */ -#define SAB82532_RSTAT_PE 0x80 -#define SAB82532_RSTAT_FE 0x40 -#define SAB82532_RSTAT_PARITY 0x01 - -/* Status Register (STAR) */ -#define SAB82532_STAR_XDOV 0x80 -#define SAB82532_STAR_XFW 0x40 -#define SAB82532_STAR_RFNE 0x20 -#define SAB82532_STAR_FCS 0x10 -#define SAB82532_STAR_TEC 0x08 -#define SAB82532_STAR_CEC 0x04 -#define SAB82532_STAR_CTS 0x02 - -/* Command Register (CMDR) */ -#define SAB82532_CMDR_RMC 0x80 -#define SAB82532_CMDR_RRES 0x40 -#define SAB82532_CMDR_RFRD 0x20 -#define SAB82532_CMDR_STI 0x10 -#define SAB82532_CMDR_XF 0x08 -#define SAB82532_CMDR_XRES 0x01 - -/* Mode Register (MODE) */ -#define SAB82532_MODE_FRTS 0x40 -#define SAB82532_MODE_FCTS 0x20 -#define SAB82532_MODE_FLON 0x10 -#define SAB82532_MODE_RAC 0x08 -#define SAB82532_MODE_RTS 0x04 -#define SAB82532_MODE_TRS 0x02 -#define SAB82532_MODE_TLP 0x01 - -/* Timer Register (TIMR) */ -#define SAB82532_TIMR_CNT_MASK 0xe0 -#define SAB82532_TIMR_VALUE_MASK 0x1f - -/* Data Format (DAFO) */ -#define SAB82532_DAFO_XBRK 0x40 -#define SAB82532_DAFO_STOP 0x20 -#define SAB82532_DAFO_PAR_SPACE 0x00 -#define SAB82532_DAFO_PAR_ODD 0x08 -#define SAB82532_DAFO_PAR_EVEN 0x10 -#define SAB82532_DAFO_PAR_MARK 0x18 -#define SAB82532_DAFO_PARE 0x04 -#define SAB82532_DAFO_CHL8 0x00 -#define SAB82532_DAFO_CHL7 0x01 -#define SAB82532_DAFO_CHL6 0x02 -#define SAB82532_DAFO_CHL5 0x03 - -/* RFIFO Control Register (RFC) */ -#define SAB82532_RFC_DPS 0x40 -#define SAB82532_RFC_DXS 0x20 -#define SAB82532_RFC_RFDF 0x10 -#define SAB82532_RFC_RFTH_1 0x00 -#define SAB82532_RFC_RFTH_4 0x04 -#define SAB82532_RFC_RFTH_16 0x08 -#define SAB82532_RFC_RFTH_32 0x0c -#define SAB82532_RFC_TCDE 0x01 - -/* Received Byte Count High (RBCH) */ -#define SAB82532_RBCH_DMA 0x80 -#define SAB82532_RBCH_CAS 0x20 - -/* Transmit Byte Count High (XBCH) */ -#define SAB82532_XBCH_DMA 0x80 -#define SAB82532_XBCH_CAS 0x20 -#define SAB82532_XBCH_XC 0x10 - -/* Channel Configuration Register 0 (CCR0) */ -#define SAB82532_CCR0_PU 0x80 -#define SAB82532_CCR0_MCE 0x40 -#define SAB82532_CCR0_SC_NRZ 0x00 -#define SAB82532_CCR0_SC_NRZI 0x08 -#define SAB82532_CCR0_SC_FM0 0x10 -#define SAB82532_CCR0_SC_FM1 0x14 -#define SAB82532_CCR0_SC_MANCH 0x18 -#define SAB82532_CCR0_SM_HDLC 0x00 -#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 -#define SAB82532_CCR0_SM_BISYNC 0x02 -#define SAB82532_CCR0_SM_ASYNC 0x03 - -/* Channel Configuration Register 1 (CCR1) */ -#define SAB82532_CCR1_ODS 0x10 -#define SAB82532_CCR1_BCR 0x08 -#define SAB82532_CCR1_CM_MASK 0x07 - -/* Channel Configuration Register 2 (CCR2) */ -#define SAB82532_CCR2_SOC1 0x80 -#define SAB82532_CCR2_SOC0 0x40 -#define SAB82532_CCR2_BR9 0x80 -#define SAB82532_CCR2_BR8 0x40 -#define SAB82532_CCR2_BDF 0x20 -#define SAB82532_CCR2_SSEL 0x10 -#define SAB82532_CCR2_XCS0 0x20 -#define SAB82532_CCR2_RCS0 0x10 -#define SAB82532_CCR2_TOE 0x08 -#define SAB82532_CCR2_RWX 0x04 -#define SAB82532_CCR2_DIV 0x01 - -/* Channel Configuration Register 3 (CCR3) */ -#define SAB82532_CCR3_PSD 0x01 - -/* Time Slot Assignment Register Transmit (TSAX) */ -#define SAB82532_TSAX_TSNX_MASK 0xfc -#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ -#define SAB82532_TSAX_XCS1 0x01 - -/* Time Slot Assignment Register Receive (TSAR) */ -#define SAB82532_TSAR_TSNR_MASK 0xfc -#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ -#define SAB82532_TSAR_RCS1 0x01 - -/* Version Status Register (VSTR) */ -#define SAB82532_VSTR_CD 0x80 -#define SAB82532_VSTR_DPLA 0x40 -#define SAB82532_VSTR_VN_MASK 0x0f -#define SAB82532_VSTR_VN_1 0x00 -#define SAB82532_VSTR_VN_2 0x01 -#define SAB82532_VSTR_VN_3_2 0x02 - -/* Global Interrupt Status Register (GIS) */ -#define SAB82532_GIS_PI 0x80 -#define SAB82532_GIS_ISA1 0x08 -#define SAB82532_GIS_ISA0 0x04 -#define SAB82532_GIS_ISB1 0x02 -#define SAB82532_GIS_ISB0 0x01 - -/* Interrupt Vector Address (IVA) */ -#define SAB82532_IVA_MASK 0xf1 - -/* Interrupt Port Configuration (IPC) */ -#define SAB82532_IPC_VIS 0x80 -#define SAB82532_IPC_SLA1 0x10 -#define SAB82532_IPC_SLA0 0x08 -#define SAB82532_IPC_CASM 0x04 -#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 -#define SAB82532_IPC_IC_ACT_LOW 0x01 -#define SAB82532_IPC_IC_ACT_HIGH 0x03 - -/* Interrupt Status Register 0 (ISR0) */ -#define SAB82532_ISR0_TCD 0x80 -#define SAB82532_ISR0_TIME 0x40 -#define SAB82532_ISR0_PERR 0x20 -#define SAB82532_ISR0_FERR 0x10 -#define SAB82532_ISR0_PLLA 0x08 -#define SAB82532_ISR0_CDSC 0x04 -#define SAB82532_ISR0_RFO 0x02 -#define SAB82532_ISR0_RPF 0x01 - -/* Interrupt Status Register 1 (ISR1) */ -#define SAB82532_ISR1_BRK 0x80 -#define SAB82532_ISR1_BRKT 0x40 -#define SAB82532_ISR1_ALLS 0x20 -#define SAB82532_ISR1_XOFF 0x10 -#define SAB82532_ISR1_TIN 0x08 -#define SAB82532_ISR1_CSC 0x04 -#define SAB82532_ISR1_XON 0x02 -#define SAB82532_ISR1_XPR 0x01 - -/* Interrupt Mask Register 0 (IMR0) */ -#define SAB82532_IMR0_TCD 0x80 -#define SAB82532_IMR0_TIME 0x40 -#define SAB82532_IMR0_PERR 0x20 -#define SAB82532_IMR0_FERR 0x10 -#define SAB82532_IMR0_PLLA 0x08 -#define SAB82532_IMR0_CDSC 0x04 -#define SAB82532_IMR0_RFO 0x02 -#define SAB82532_IMR0_RPF 0x01 - -/* Interrupt Mask Register 1 (IMR1) */ -#define SAB82532_IMR1_BRK 0x80 -#define SAB82532_IMR1_BRKT 0x40 -#define SAB82532_IMR1_ALLS 0x20 -#define SAB82532_IMR1_XOFF 0x10 -#define SAB82532_IMR1_TIN 0x08 -#define SAB82532_IMR1_CSC 0x04 -#define SAB82532_IMR1_XON 0x02 -#define SAB82532_IMR1_XPR 0x01 - -/* Port Interrupt Status Register (PIS) */ -#define SAB82532_PIS_SYNC_B 0x08 -#define SAB82532_PIS_DTR_B 0x04 -#define SAB82532_PIS_DTR_A 0x02 -#define SAB82532_PIS_SYNC_A 0x01 - -/* Channel Configuration Register 4 (CCR4) */ -#define SAB82532_CCR4_MCK4 0x80 -#define SAB82532_CCR4_EBRG 0x40 -#define SAB82532_CCR4_TST1 0x20 -#define SAB82532_CCR4_ICD 0x10 - - -#endif /* !(_SUNSAB_H) */ diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c deleted file mode 100644 index 551ebfe..0000000 --- a/drivers/serial/sunsu.c +++ /dev/null @@ -1,1608 +0,0 @@ -/* - * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) - * - * This is mainly a variation of 8250.c, credits go to authors mentioned - * therein. In fact this driver should be merged into the generic 8250.c - * infrastructure perhaps using a 8250_sparc.c module. - * - * Fixed to use tty_get_baud_rate(). - * Theodore Ts'o , 2001-Oct-12 - * - * Converted to new 2.5.x UART layer. - * David S. Miller (davem@davemloft.net), 2002-Jul-29 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIO -#include -#endif -#include -#include -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" - -/* We are on a NS PC87303 clocked with 24.0 MHz, which results - * in a UART clock of 1.8462 MHz. - */ -#define SU_BASE_BAUD (1846200 / 16) - -enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; -static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { - { "unknown", 1, 0 }, - { "8250", 1, 0 }, - { "16450", 1, 0 }, - { "16550", 1, 0 }, - { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "Cirrus", 1, 0 }, - { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, - { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "Startech", 1, 0 }, - { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } -}; - -struct uart_sunsu_port { - struct uart_port port; - unsigned char acr; - unsigned char ier; - unsigned short rev; - unsigned char lcr; - unsigned int lsr_break_flag; - unsigned int cflag; - - /* Probing information. */ - enum su_type su_type; - unsigned int type_probed; /* XXX Stupid */ - unsigned long reg_size; - -#ifdef CONFIG_SERIO - struct serio serio; - int serio_open; -#endif -}; - -static unsigned int serial_in(struct uart_sunsu_port *up, int offset) -{ - offset <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - return inb(up->port.iobase + 1); - - case UPIO_MEM: - return readb(up->port.membase + offset); - - default: - return inb(up->port.iobase + offset); - } -} - -static void serial_out(struct uart_sunsu_port *up, int offset, int value) -{ -#ifndef CONFIG_SPARC64 - /* - * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are - * connected with a gate then go to SlavIO. When IRQ4 goes tristated - * gate outputs a logical one. Since we use level triggered interrupts - * we have lockup and watchdog reset. We cannot mask IRQ because - * keyboard shares IRQ with us (Word has it as Bob Smelik's design). - * This problem is similar to what Alpha people suffer, see serial.c. - */ - if (offset == UART_MCR) - value |= UART_MCR_OUT2; -#endif - offset <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - outb(value, up->port.iobase + 1); - break; - - case UPIO_MEM: - writeb(value, up->port.membase + offset); - break; - - default: - outb(value, up->port.iobase + offset); - } -} - -/* - * We used to support using pause I/O for certain machines. We - * haven't supported this for a while, but just in case it's badly - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -#define serial_inp(up, offset) serial_in(up, offset) -#define serial_outp(up, offset, value) serial_out(up, offset, value) - - -/* - * For the 16C950 - */ -static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) -{ - serial_out(up, UART_SCR, offset); - serial_out(up, UART_ICR, value); -} - -#if 0 /* Unused currently */ -static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) -{ - unsigned int value; - - serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); - serial_out(up, UART_SCR, offset); - value = serial_in(up, UART_ICR); - serial_icr_write(up, UART_ACR, up->acr); - - return value; -} -#endif - -#ifdef CONFIG_SERIAL_8250_RSA -/* - * Attempts to turn on the RSA FIFO. Returns zero on failure. - * We set the port uart clock rate if we succeed. - */ -static int __enable_rsa(struct uart_sunsu_port *up) -{ - unsigned char mode; - int result; - - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; - - return result; -} - -static void enable_rsa(struct uart_sunsu_port *up) -{ - if (up->port.type == PORT_RSA) { - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - __enable_rsa(up); - spin_unlock_irq(&up->port.lock); - } - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_outp(up, UART_RSA_FRR, 0); - } -} - -/* - * Attempts to turn off the RSA FIFO. Returns zero on failure. - * It is unknown why interrupts were disabled in here. However, - * the caller is expected to preserve this behaviour by grabbing - * the spinlock before calling this function. - */ -static void disable_rsa(struct uart_sunsu_port *up) -{ - unsigned char mode; - int result; - - if (up->port.type == PORT_RSA && - up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; - spin_unlock_irq(&up->port.lock); - } -} -#endif /* CONFIG_SERIAL_8250_RSA */ - -static inline void __stop_tx(struct uart_sunsu_port *p) -{ - if (p->ier & UART_IER_THRI) { - p->ier &= ~UART_IER_THRI; - serial_out(p, UART_IER, p->ier); - } -} - -static void sunsu_stop_tx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - __stop_tx(up); - - /* - * We really want to stop the transmitter from sending. - */ - if (up->port.type == PORT_16C950) { - up->acr |= UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void sunsu_start_tx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } - - /* - * Re-enable the transmitter if we disabled it. - */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { - up->acr &= ~UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void sunsu_stop_rx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void sunsu_enable_ms(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct tty_struct * -receive_chars(struct uart_sunsu_port *up, unsigned char *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch, flag; - int max_count = 256; - int saw_console_brk = 0; - - do { - ch = serial_inp(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - if (up->port.cons != NULL && - up->port.line == up->port.cons->index) - saw_console_brk = 1; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (up->port.cons != NULL && - up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - if (*status & UART_LSR_OE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - ignore_char: - *status = serial_inp(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - - if (saw_console_brk) - sun_do_break(); - - return tty; -} - -static void transmit_chars(struct uart_sunsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_outp(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_tx_stopped(&up->port)) { - sunsu_stop_tx(&up->port); - return; - } - if (uart_circ_empty(xmit)) { - __stop_tx(up); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - __stop_tx(up); -} - -static void check_modem_status(struct uart_sunsu_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) -{ - struct uart_sunsu_port *up = dev_id; - unsigned long flags; - unsigned char status; - - spin_lock_irqsave(&up->port.lock, flags); - - do { - struct tty_struct *tty; - - status = serial_inp(up, UART_LSR); - tty = NULL; - if (status & UART_LSR_DR) - tty = receive_chars(up, &status); - check_modem_status(up); - if (status & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - spin_lock_irqsave(&up->port.lock, flags); - - } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return IRQ_HANDLED; -} - -/* Separate interrupt handling path for keyboard/mouse ports. */ - -static void -sunsu_change_speed(struct uart_port *port, unsigned int cflag, - unsigned int iflag, unsigned int quot); - -static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) -{ - unsigned int cur_cflag = up->cflag; - int quot, new_baud; - - up->cflag &= ~CBAUD; - up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); - - quot = up->port.uartclk / (16 * new_baud); - - sunsu_change_speed(&up->port, up->cflag, 0, quot); -} - -static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) -{ - do { - unsigned char ch = serial_inp(up, UART_RX); - - /* Stop-A is handled by drivers/char/keyboard.c now. */ - if (up->su_type == SU_PORT_KBD) { -#ifdef CONFIG_SERIO - serio_interrupt(&up->serio, ch, 0); -#endif - } else if (up->su_type == SU_PORT_MS) { - int ret = suncore_mouse_baud_detection(ch, is_break); - - switch (ret) { - case 2: - sunsu_change_mouse_baud(up); - /* fallthru */ - case 1: - break; - - case 0: -#ifdef CONFIG_SERIO - serio_interrupt(&up->serio, ch, 0); -#endif - break; - }; - } - } while (serial_in(up, UART_LSR) & UART_LSR_DR); -} - -static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) -{ - struct uart_sunsu_port *up = dev_id; - - if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { - unsigned char status = serial_inp(up, UART_LSR); - - if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) - receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); - } - - return IRQ_HANDLED; -} - -static unsigned int sunsu_tx_empty(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int sunsu_get_mctrl(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - serial_out(up, UART_MCR, mcr); -} - -static void sunsu_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int sunsu_startup(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - int retval; - - if (up->port.type == PORT_16C950) { - /* Wake up and initialize UART */ - up->acr = 0; - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_IER, 0); - serial_outp(up, UART_LCR, 0); - serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_LCR, 0); - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * If this is an RSA port, see if we can kick it up to the - * higher speed clock. - */ - enable_rsa(up); -#endif - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_FCR, 0); - } - - /* - * Clear the interrupt registers. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - /* - * At this point, there's no way the LSR could still be 0xff; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (!(up->port.flags & UPF_BUGGY_UART) && - (serial_inp(up, UART_LSR) == 0xff)) { - printk("ttyS%d: LSR safety check engaged!\n", up->port.line); - return -ENODEV; - } - - if (up->su_type != SU_PORT_PORT) { - retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, - IRQF_SHARED, su_typev[up->su_type], up); - } else { - retval = request_irq(up->port.irq, sunsu_serial_interrupt, - IRQF_SHARED, su_typev[up->su_type], up); - } - if (retval) { - printk("su: Cannot register IRQ %d\n", up->port.irq); - return retval; - } - - /* - * Now, initialize the UART - */ - serial_outp(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.mctrl |= TIOCM_OUT2; - - sunsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_outp(up, UART_IER, up->ier); - - if (up->port.flags & UPF_FOURPORT) { - unsigned int icp; - /* - * Enable interrupts on the AST Fourport board - */ - icp = (up->port.iobase & 0xfe0) | 0x01f; - outb_p(0x80, icp); - (void) inb_p(icp); - } - - /* - * And clear the interrupt registers again for luck. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - return 0; -} - -static void sunsu_shutdown(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_outp(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; - } else - up->port.mctrl &= ~TIOCM_OUT2; - - sunsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_FCR, 0); - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Reset the RSA board back to 115kbps compat mode. - */ - disable_rsa(up); -#endif - - /* - * Read data port to reset things. - */ - (void) serial_in(up, UART_RX); - - free_irq(up->port.irq, up); -} - -static void -sunsu_change_speed(struct uart_port *port, unsigned int cflag, - unsigned int iflag, unsigned int quot) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char cval, fcr = 0; - unsigned long flags; - - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - default: - case CS8: - cval = 0x03; - break; - } - - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Work around a bug in the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates - * when DLL is 0. - */ - if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && - up->rev == 0x5201) - quot ++; - - if (uart_config[up->port.type].flags & UART_USE_FIFO) { - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; -#ifdef CONFIG_SERIAL_8250_RSA - else if (up->port.type == PORT_RSA) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; -#endif - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; - } - if (up->port.type == PORT_16750) - fcr |= UART_FCR7_64BYTE; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (uart_config[up->port.type].flags & UART_STARTECH) { - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); - } - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ - if (up->port.type == PORT_16750) - serial_outp(up, UART_FCR, fcr); /* set fcr */ - serial_outp(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { - if (fcr & UART_FCR_ENABLE_FIFO) { - /* emulated UARTs (Lucent Venus 167x) need two steps */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_FCR, fcr); /* set fcr */ - } - - up->cflag = cflag; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -sunsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); -} - -static void sunsu_release_port(struct uart_port *port) -{ -} - -static int sunsu_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunsu_config_port(struct uart_port *port, int flags) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - if (flags & UART_CONFIG_TYPE) { - /* - * We are supposed to call autoconfig here, but this requires - * splitting all the OBP probing crap from the UART probing. - * We'll do it when we kill sunsu.c altogether. - */ - port->type = up->type_probed; /* XXX */ - } -} - -static int -sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char * -sunsu_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops sunsu_pops = { - .tx_empty = sunsu_tx_empty, - .set_mctrl = sunsu_set_mctrl, - .get_mctrl = sunsu_get_mctrl, - .stop_tx = sunsu_stop_tx, - .start_tx = sunsu_start_tx, - .stop_rx = sunsu_stop_rx, - .enable_ms = sunsu_enable_ms, - .break_ctl = sunsu_break_ctl, - .startup = sunsu_startup, - .shutdown = sunsu_shutdown, - .set_termios = sunsu_set_termios, - .type = sunsu_type, - .release_port = sunsu_release_port, - .request_port = sunsu_request_port, - .config_port = sunsu_config_port, - .verify_port = sunsu_verify_port, -}; - -#define UART_NR 4 - -static struct uart_sunsu_port sunsu_ports[UART_NR]; - -#ifdef CONFIG_SERIO - -static DEFINE_SPINLOCK(sunsu_serio_lock); - -static int sunsu_serio_write(struct serio *serio, unsigned char ch) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - int lsr; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - - do { - lsr = serial_in(up, UART_LSR); - } while (!(lsr & UART_LSR_THRE)); - - /* Send the character out. */ - serial_out(up, UART_TX, ch); - - spin_unlock_irqrestore(&sunsu_serio_lock, flags); - - return 0; -} - -static int sunsu_serio_open(struct serio *serio) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - if (!up->serio_open) { - up->serio_open = 1; - ret = 0; - } else - ret = -EBUSY; - spin_unlock_irqrestore(&sunsu_serio_lock, flags); - - return ret; -} - -static void sunsu_serio_close(struct serio *serio) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - up->serio_open = 0; - spin_unlock_irqrestore(&sunsu_serio_lock, flags); -} - -#endif /* CONFIG_SERIO */ - -static void sunsu_autoconfig(struct uart_sunsu_port *up) -{ - unsigned char status1, status2, scratch, scratch2, scratch3; - unsigned char save_lcr, save_mcr; - unsigned long flags; - - if (up->su_type == SU_PORT_NONE) - return; - - up->type_probed = PORT_UNKNOWN; - up->port.iotype = UPIO_MEM; - - spin_lock_irqsave(&up->port.lock, flags); - - if (!(up->port.flags & UPF_BUGGY_UART)) { - /* - * Do a simple existence test first; if we fail this, there's - * no point trying anything else. - * - * 0x80 is used as a nonsense port to prevent against false - * positives due to ISA bus float. The assumption is that - * 0x80 is a non-existent port; which should be safe since - * include/asm/io.h also makes this assumption. - */ - scratch = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0); -#ifdef __i386__ - outb(0xff, 0x080); -#endif - scratch2 = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0x0f); -#ifdef __i386__ - outb(0, 0x080); -#endif - scratch3 = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, scratch); - if (scratch2 != 0 || scratch3 != 0x0F) - goto out; /* We failed; there's nothing here */ - } - - save_mcr = serial_in(up, UART_MCR); - save_lcr = serial_in(up, UART_LCR); - - /* - * Check to see if a UART is really there. Certain broken - * internal modems based on the Rockwell chipset fail this - * test, because they apparently don't implement the loopback - * test mode. So this test is skipped on the COM 1 through - * COM 4 ports. This *should* be safe, since no board - * manufacturer would be stupid enough to design a board - * that conflicts with COM 1-4 --- we hope! - */ - if (!(up->port.flags & UPF_SKIP_TEST)) { - serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); - status1 = serial_inp(up, UART_MSR) & 0xF0; - serial_outp(up, UART_MCR, save_mcr); - if (status1 != 0x90) - goto out; /* We failed loopback test */ - } - serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ - serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - switch (scratch) { - case 0: - up->port.type = PORT_16450; - break; - case 1: - up->port.type = PORT_UNKNOWN; - break; - case 2: - up->port.type = PORT_16550; - break; - case 3: - up->port.type = PORT_16550A; - break; - } - if (up->port.type == PORT_16550A) { - /* Check for Startech UART's */ - serial_outp(up, UART_LCR, UART_LCR_DLAB); - if (serial_in(up, UART_EFR) == 0) { - up->port.type = PORT_16650; - } else { - serial_outp(up, UART_LCR, 0xBF); - if (serial_in(up, UART_EFR) == 0) - up->port.type = PORT_16650V2; - } - } - if (up->port.type == PORT_16550A) { - /* Check for TI 16750 */ - serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); - serial_outp(up, UART_FCR, - UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - scratch = serial_in(up, UART_IIR) >> 5; - if (scratch == 7) { - /* - * If this is a 16750, and not a cheap UART - * clone, then it should only go into 64 byte - * mode if the UART_FCR7_64BYTE bit was set - * while UART_LCR_DLAB was latched. - */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, - UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - scratch = serial_in(up, UART_IIR) >> 5; - if (scratch == 6) - up->port.type = PORT_16750; - } - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_LCR, save_lcr); - if (up->port.type == PORT_16450) { - scratch = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0xa5); - status1 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0x5a); - status2 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, scratch); - - if ((status1 != 0xa5) || (status2 != 0x5a)) - up->port.type = PORT_8250; - } - - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; - - if (up->port.type == PORT_UNKNOWN) - goto out; - up->type_probed = up->port.type; /* XXX */ - - /* - * Reset the UART. - */ -#ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) - serial_outp(up, UART_RSA_FRR, 0); -#endif - serial_outp(up, UART_MCR, save_mcr); - serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT)); - serial_outp(up, UART_FCR, 0); - (void)serial_in(up, UART_RX); - serial_outp(up, UART_IER, 0); - -out: - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver sunsu_reg = { - .owner = THIS_MODULE, - .driver_name = "sunsu", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) -{ - int quot, baud; -#ifdef CONFIG_SERIO - struct serio *serio; -#endif - - if (up->su_type == SU_PORT_KBD) { - up->cflag = B1200 | CS8 | CLOCAL | CREAD; - baud = 1200; - } else { - up->cflag = B4800 | CS8 | CLOCAL | CREAD; - baud = 4800; - } - quot = up->port.uartclk / (16 * baud); - - sunsu_autoconfig(up); - if (up->port.type == PORT_UNKNOWN) - return -ENODEV; - - printk("%s: %s port at %llx, irq %u\n", - up->port.dev->of_node->full_name, - (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", - (unsigned long long) up->port.mapbase, - up->port.irq); - -#ifdef CONFIG_SERIO - serio = &up->serio; - serio->port_data = up; - - serio->id.type = SERIO_RS232; - if (up->su_type == SU_PORT_KBD) { - serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "sukbd", sizeof(serio->name)); - } else { - serio->id.proto = SERIO_SUN; - serio->id.extra = 1; - strlcpy(serio->name, "sums", sizeof(serio->name)); - } - strlcpy(serio->phys, - (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), - sizeof(serio->phys)); - - serio->write = sunsu_serio_write; - serio->open = sunsu_serio_open; - serio->close = sunsu_serio_close; - serio->dev.parent = up->port.dev; - - serio_register_port(serio); -#endif - - sunsu_change_speed(&up->port, up->cflag, 0, quot); - - sunsu_startup(&up->port); - return 0; -} - -/* - * ------------------------------------------------------------ - * Serial console driver - * ------------------------------------------------------------ - */ - -#ifdef CONFIG_SERIAL_SUNSU_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * Wait for transmitter & holding register to empty - */ -static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void sunsu_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void sunsu_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sunsu_port *up = &sunsu_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* - * First save the UER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, sunsu_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -/* - * Setup initial baud/bits/parity. We do two things here: - * - construct a cflag setting for the first su_open() - * - initialize the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init sunsu_console_setup(struct console *co, char *options) -{ - static struct ktermios dummy; - struct ktermios termios; - struct uart_port *port; - - printk("Console: ttyS%d (SU)\n", - (sunsu_reg.minor - 64) + co->index); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &sunsu_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - /* Get firmware console settings. */ - sunserial_console_termios(co, port->dev->of_node); - - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = co->cflag; - port->mctrl |= TIOCM_DTR; - port->ops->set_termios(port, &termios, &dummy); - - return 0; -} - -static struct console sunsu_console = { - .name = "ttyS", - .write = sunsu_console_write, - .device = uart_console_device, - .setup = sunsu_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunsu_reg, -}; - -/* - * Register console. - */ - -static inline struct console *SUNSU_CONSOLE(void) -{ - return &sunsu_console; -} -#else -#define SUNSU_CONSOLE() (NULL) -#define sunsu_serial_console_init() do { } while (0) -#endif - -static enum su_type __devinit su_get_type(struct device_node *dp) -{ - struct device_node *ap = of_find_node_by_path("/aliases"); - - if (ap) { - const char *keyb = of_get_property(ap, "keyboard", NULL); - const char *ms = of_get_property(ap, "mouse", NULL); - - if (keyb) { - if (dp == of_find_node_by_path(keyb)) - return SU_PORT_KBD; - } - if (ms) { - if (dp == of_find_node_by_path(ms)) - return SU_PORT_MS; - } - } - - return SU_PORT_PORT; -} - -static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int inst; - struct device_node *dp = op->dev.of_node; - struct uart_sunsu_port *up; - struct resource *rp; - enum su_type type; - bool ignore_line; - int err; - - type = su_get_type(dp); - if (type == SU_PORT_PORT) { - if (inst >= UART_NR) - return -EINVAL; - up = &sunsu_ports[inst]; - } else { - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (!up) - return -ENOMEM; - } - - up->port.line = inst; - - spin_lock_init(&up->port.lock); - - up->su_type = type; - - rp = &op->resource[0]; - up->port.mapbase = rp->start; - up->reg_size = (rp->end - rp->start) + 1; - up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); - if (!up->port.membase) { - if (type != SU_PORT_PORT) - kfree(up); - return -ENOMEM; - } - - up->port.irq = op->archdata.irqs[0]; - - up->port.dev = &op->dev; - - up->port.type = PORT_UNKNOWN; - up->port.uartclk = (SU_BASE_BAUD * 16); - - err = 0; - if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { - err = sunsu_kbd_ms_init(up); - if (err) { - of_iounmap(&op->resource[0], - up->port.membase, up->reg_size); - kfree(up); - return err; - } - dev_set_drvdata(&op->dev, up); - - return 0; - } - - up->port.flags |= UPF_BOOT_AUTOCONF; - - sunsu_autoconfig(up); - - err = -ENODEV; - if (up->port.type == PORT_UNKNOWN) - goto out_unmap; - - up->port.ops = &sunsu_pops; - - ignore_line = false; - if (!strcmp(dp->name, "rsc-console") || - !strcmp(dp->name, "lom-console")) - ignore_line = true; - - sunserial_console_match(SUNSU_CONSOLE(), dp, - &sunsu_reg, up->port.line, - ignore_line); - err = uart_add_one_port(&sunsu_reg, &up->port); - if (err) - goto out_unmap; - - dev_set_drvdata(&op->dev, up); - - inst++; - - return 0; - -out_unmap: - of_iounmap(&op->resource[0], up->port.membase, up->reg_size); - return err; -} - -static int __devexit su_remove(struct platform_device *op) -{ - struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); - bool kbdms = false; - - if (up->su_type == SU_PORT_MS || - up->su_type == SU_PORT_KBD) - kbdms = true; - - if (kbdms) { -#ifdef CONFIG_SERIO - serio_unregister_port(&up->serio); -#endif - } else if (up->port.type != PORT_UNKNOWN) - uart_remove_one_port(&sunsu_reg, &up->port); - - if (up->port.membase) - of_iounmap(&op->resource[0], up->port.membase, up->reg_size); - - if (kbdms) - kfree(up); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id su_match[] = { - { - .name = "su", - }, - { - .name = "su_pnp", - }, - { - .name = "serial", - .compatible = "su", - }, - { - .type = "serial", - .compatible = "su", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, su_match); - -static struct of_platform_driver su_driver = { - .driver = { - .name = "su", - .owner = THIS_MODULE, - .of_match_table = su_match, - }, - .probe = su_probe, - .remove = __devexit_p(su_remove), -}; - -static int __init sunsu_init(void) -{ - struct device_node *dp; - int err; - int num_uart = 0; - - for_each_node_by_name(dp, "su") { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - for_each_node_by_name(dp, "su_pnp") { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - for_each_node_by_name(dp, "serial") { - if (of_device_is_compatible(dp, "su")) { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - } - for_each_node_by_type(dp, "serial") { - if (of_device_is_compatible(dp, "su")) { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - } - - if (num_uart) { - err = sunserial_register_minors(&sunsu_reg, num_uart); - if (err) - return err; - } - - err = of_register_platform_driver(&su_driver); - if (err && num_uart) - sunserial_unregister_minors(&sunsu_reg, num_uart); - - return err; -} - -static void __exit sunsu_exit(void) -{ - if (sunsu_reg.nr) - sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); -} - -module_init(sunsu_init); -module_exit(sunsu_exit); - -MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); -MODULE_DESCRIPTION("Sun SU serial port driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c deleted file mode 100644 index c1967ac..0000000 --- a/drivers/serial/sunzilog.c +++ /dev/null @@ -1,1655 +0,0 @@ -/* sunzilog.c: Zilog serial driver for Sparc systems. - * - * Driver for Zilog serial chips found on Sun workstations and - * servers. This driver could actually be made more generic. - * - * This is based on the old drivers/sbus/char/zs.c code. A lot - * of code has been simply moved over directly from there but - * much has been rewritten. Credits therefore go out to Eddie - * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their - * work there. - * - * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIO -#include -#endif -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" -#include "sunzilog.h" - -/* On 32-bit sparcs we need to delay after register accesses - * to accommodate sun4 systems, but we do not need to flush writes. - * On 64-bit sparc we only need to flush single writes to ensure - * completion. - */ -#ifndef CONFIG_SPARC64 -#define ZSDELAY() udelay(5) -#define ZSDELAY_LONG() udelay(20) -#define ZS_WSYNC(channel) do { } while (0) -#else -#define ZSDELAY() -#define ZSDELAY_LONG() -#define ZS_WSYNC(__channel) \ - readb(&((__channel)->control)) -#endif - -#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ -#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_sunzilog_port { - struct uart_port port; - - /* IRQ servicing chain. */ - struct uart_sunzilog_port *next; - - /* Current values of Zilog write registers. */ - unsigned char curregs[NUM_ZSREGS]; - - unsigned int flags; -#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 -#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 -#define SUNZILOG_FLAG_IS_CONS 0x00000004 -#define SUNZILOG_FLAG_IS_KGDB 0x00000008 -#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 -#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 -#define SUNZILOG_FLAG_REGS_HELD 0x00000040 -#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 -#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 -#define SUNZILOG_FLAG_ESCC 0x00000200 -#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 - - unsigned int cflag; - - unsigned char parity_mask; - unsigned char prev_status; - -#ifdef CONFIG_SERIO - struct serio serio; - int serio_open; -#endif -}; - -static void sunzilog_putchar(struct uart_port *port, int ch); - -#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) -#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) - -#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) -#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) -#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) - -/* Reading and writing Zilog8530 registers. The delays are to make this - * driver work on the Sun4 which needs a settling delay after each chip - * register access, other machines handle this in hardware via auxiliary - * flip-flops which implement the settle time we do in software. - * - * The port lock must be held and local IRQs must be disabled - * when {read,write}_zsreg is invoked. - */ -static unsigned char read_zsreg(struct zilog_channel __iomem *channel, - unsigned char reg) -{ - unsigned char retval; - - writeb(reg, &channel->control); - ZSDELAY(); - retval = readb(&channel->control); - ZSDELAY(); - - return retval; -} - -static void write_zsreg(struct zilog_channel __iomem *channel, - unsigned char reg, unsigned char value) -{ - writeb(reg, &channel->control); - ZSDELAY(); - writeb(value, &channel->control); - ZSDELAY(); -} - -static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) -{ - int i; - - for (i = 0; i < 32; i++) { - unsigned char regval; - - regval = readb(&channel->control); - ZSDELAY(); - if (regval & Rx_CH_AV) - break; - - regval = read_zsreg(channel, R1); - readb(&channel->data); - ZSDELAY(); - - if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - } -} - -/* This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) -{ - int i; - int escc; - unsigned char r15; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - sunzilog_clear_fifo(channel); - - /* Disable all interrupts. */ - write_zsreg(channel, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(channel, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(channel, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(channel, R3, regs[R3] & ~RxENAB); - write_zsreg(channel, R5, regs[R5] & ~TxENAB); - - /* Synchronous mode config. */ - write_zsreg(channel, R6, regs[R6]); - write_zsreg(channel, R7, regs[R7]); - - /* Don't mess with the interrupt vector (R2, unused by us) and - * master interrupt control (R9). We make sure this is setup - * properly at probe time then never touch it again. - */ - - /* Disable baud generator. */ - write_zsreg(channel, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(channel, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(channel, R12, regs[R12]); - write_zsreg(channel, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(channel, R14, regs[R14]); - - /* External status interrupt control. */ - write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); - - /* ESCC Extension Register */ - r15 = read_zsreg(channel, R15); - if (r15 & 0x01) { - write_zsreg(channel, R7, regs[R7p]); - - /* External status interrupt and FIFO control. */ - write_zsreg(channel, R15, regs[R15] & ~WR7pEN); - escc = 1; - } else { - /* Clear FIFO bit case it is an issue */ - regs[R15] &= ~FIFOEN; - escc = 0; - } - - /* Reset external status interrupts. */ - write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ - write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(channel, R3, regs[R3]); - write_zsreg(channel, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(channel, R1, regs[R1]); - - return escc; -} - -/* Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - if (!ZS_REGS_HELD(up)) { - if (ZS_TX_ACTIVE(up)) { - up->flags |= SUNZILOG_FLAG_REGS_HELD; - } else { - __load_zsregs(channel, up->curregs); - } - } -} - -static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) -{ - unsigned int cur_cflag = up->cflag; - int brg, new_baud; - - up->cflag &= ~CBAUD; - up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); - - brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); -} - -static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, - unsigned char ch, int is_break) -{ - if (ZS_IS_KEYB(up)) { - /* Stop-A is handled by drivers/char/keyboard.c now. */ -#ifdef CONFIG_SERIO - if (up->serio_open) - serio_interrupt(&up->serio, ch, 0); -#endif - } else if (ZS_IS_MOUSE(up)) { - int ret = suncore_mouse_baud_detection(ch, is_break); - - switch (ret) { - case 2: - sunzilog_change_mouse_baud(up); - /* fallthru */ - case 1: - break; - - case 0: -#ifdef CONFIG_SERIO - if (up->serio_open) - serio_interrupt(&up->serio, ch, 0); -#endif - break; - }; - } -} - -static struct tty_struct * -sunzilog_receive_chars(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - struct tty_struct *tty; - unsigned char ch, r1, flag; - - tty = NULL; - if (up->port.state != NULL && /* Unopened serial console */ - up->port.state->port.tty != NULL) /* Keyboard || mouse */ - tty = up->port.state->port.tty; - - for (;;) { - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->control); - ZSDELAY(); - - /* This funny hack depends upon BRK_ABRT not interfering - * with the other bits we care about in R1. - */ - if (ch & BRK_ABRT) - r1 |= BRK_ABRT; - - if (!(ch & Rx_CH_AV)) - break; - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - - if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { - sunzilog_kbdms_receive_chars(up, ch, 0); - continue; - } - - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - - /* A real serial line, record the character and status. */ - flag = TTY_NORMAL; - up->port.icount.rx++; - if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { - if (r1 & BRK_ABRT) { - r1 &= ~(PAR_ERR | CRC_ERR); - up->port.icount.brk++; - if (uart_handle_break(&up->port)) - continue; - } - else if (r1 & PAR_ERR) - up->port.icount.parity++; - else if (r1 & CRC_ERR) - up->port.icount.frame++; - if (r1 & Rx_OVR) - up->port.icount.overrun++; - r1 &= up->port.read_status_mask; - if (r1 & BRK_ABRT) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if (up->port.ignore_status_mask == 0xff || - (r1 & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - return tty; -} - -static void sunzilog_status_handle(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - unsigned char status; - - status = readb(&channel->control); - ZSDELAY(); - - writeb(RES_EXT_INT, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (status & BRK_ABRT) { - if (ZS_IS_MOUSE(up)) - sunzilog_kbdms_receive_chars(up, 0, 1); - if (ZS_IS_CONS(up)) { - /* Wait for BREAK to deassert to avoid potentially - * confusing the PROM. - */ - while (1) { - status = readb(&channel->control); - ZSDELAY(); - if (!(status & BRK_ABRT)) - break; - } - sun_do_break(); - return; - } - } - - if (ZS_WANTS_MODEM_STATUS(up)) { - if (status & SYNC) - up->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - */ - if ((status ^ up->prev_status) ^ DCD) - uart_handle_dcd_change(&up->port, - (status & DCD)); - if ((status ^ up->prev_status) ^ CTS) - uart_handle_cts_change(&up->port, - (status & CTS)); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - up->prev_status = status; -} - -static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - struct circ_buf *xmit; - - if (ZS_IS_CONS(up)) { - unsigned char status = readb(&channel->control); - ZSDELAY(); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(up)) { - __load_zsregs(channel, up->curregs); - up->flags &= ~SUNZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(up)) { - up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - if (up->port.x_char) { - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - writeb(up->port.x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - - if (up->port.state == NULL) - goto ack_tx_int; - xmit = &up->port.state->xmit; - if (uart_circ_empty(xmit)) - goto ack_tx_int; - - if (uart_tx_stopped(&up->port)) - goto ack_tx_int; - - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return; - -ack_tx_int: - writeb(RES_Tx_P, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) -{ - struct uart_sunzilog_port *up = dev_id; - - while (up) { - struct zilog_channel __iomem *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - struct tty_struct *tty; - unsigned char r3; - - spin_lock(&up->port.lock); - r3 = read_zsreg(channel, R3); - - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHARxIP) - tty = sunzilog_receive_chars(up, channel); - if (r3 & CHAEXT) - sunzilog_status_handle(up, channel); - if (r3 & CHATxIP) - sunzilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - /* Channel B */ - up = up->next; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock(&up->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHBRxIP) - tty = sunzilog_receive_chars(up, channel); - if (r3 & CHBEXT) - sunzilog_status_handle(up, channel); - if (r3 & CHBTxIP) - sunzilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - up = up->next; - } - - return IRQ_HANDLED; -} - -/* A convenient way to quickly get R0 status. The caller must _not_ hold the - * port lock, it is acquired here. - */ -static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) -{ - struct zilog_channel __iomem *channel; - unsigned char status; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - status = readb(&channel->control); - ZSDELAY(); - - return status; -} - -/* The port lock is not held. */ -static unsigned int sunzilog_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned char status; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - - status = sunzilog_read_channel_status(port); - - spin_unlock_irqrestore(&port->lock, flags); - - if (status & Tx_BUF_EMP) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static unsigned int sunzilog_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int ret; - - status = sunzilog_read_channel_status(port); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC) - ret |= TIOCM_DSR; - if (status & CTS) - ret |= TIOCM_CTS; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits; - - set_bits = clear_bits = 0; - - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - up->curregs[R5] |= set_bits; - up->curregs[R5] &= ~clear_bits; - write_zsreg(channel, R5, up->curregs[R5]); -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_stop_tx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - - up->flags |= SUNZILOG_FLAG_TX_STOPPED; -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_start_tx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char status; - - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; - - status = readb(&channel->control); - ZSDELAY(); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - writeb(port->x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - } -} - -/* The port lock is held. */ -static void sunzilog_stop_rx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - struct zilog_channel __iomem *channel; - - if (ZS_IS_CONS(up)) - return; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable all RX interrupts. */ - up->curregs[R1] &= ~RxINT_MASK; - sunzilog_maybe_update_regs(up, channel); -} - -/* The port lock is held. */ -static void sunzilog_enable_ms(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char new_reg; - - new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != up->curregs[R15]) { - up->curregs[R15] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); - } -} - -/* The port lock is not held. */ -static void sunzilog_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != up->curregs[R5]) { - up->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R5, up->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __sunzilog_startup(struct uart_sunzilog_port *up) -{ - struct zilog_channel __iomem *channel; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->prev_status = readb(&channel->control); - - /* Enable receiver and transmitter. */ - up->curregs[R3] |= RxENAB; - up->curregs[R5] |= TxENAB; - - up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - sunzilog_maybe_update_regs(up, channel); -} - -static int sunzilog_startup(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - unsigned long flags; - - if (ZS_IS_CONS(up)) - return 0; - - spin_lock_irqsave(&port->lock, flags); - __sunzilog_startup(up); - spin_unlock_irqrestore(&port->lock, flags); - return 0; -} - -/* - * The test for ZS_IS_CONS is explained by the following e-mail: - ***** - * From: Russell King - * Date: Sun, 8 Dec 2002 10:18:38 +0000 - * - * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: - * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, - * > and I noticed that something is not right with reference - * > counting in this case. It seems that when the console - * > is open by kernel initially, this is not accounted - * > as an open, and uart_startup is not called. - * - * That is correct. We are unable to call uart_startup when the serial - * console is initialised because it may need to allocate memory (as - * request_irq does) and the memory allocators may not have been - * initialised. - * - * 1. initialise the port into a state where it can send characters in the - * console write method. - * - * 2. don't do the actual hardware shutdown in your shutdown() method (but - * do the normal software shutdown - ie, free irqs etc) - ***** - */ -static void sunzilog_shutdown(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - struct zilog_channel __iomem *channel; - unsigned long flags; - - if (ZS_IS_CONS(up)) - return; - - spin_lock_irqsave(&port->lock, flags); - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable receiver and transmitter. */ - up->curregs[R3] &= ~RxENAB; - up->curregs[R5] &= ~TxENAB; - - /* Disable all interrupts and BRK assertion. */ - up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - up->curregs[R5] &= ~SND_BRK; - sunzilog_maybe_update_regs(up, channel); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void -sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, - unsigned int iflag, int brg) -{ - - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - - /* Program BAUD and clock source. */ - up->curregs[R4] &= ~XCLK_MASK; - up->curregs[R4] |= X16CLK; - up->curregs[R12] = brg & 0xff; - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRSRC | BRENAB; - - /* Character size, stop bits, and parity. */ - up->curregs[R3] &= ~RxN_MASK; - up->curregs[R5] &= ~TxN_MASK; - switch (cflag & CSIZE) { - case CS5: - up->curregs[R3] |= Rx5; - up->curregs[R5] |= Tx5; - up->parity_mask = 0x1f; - break; - case CS6: - up->curregs[R3] |= Rx6; - up->curregs[R5] |= Tx6; - up->parity_mask = 0x3f; - break; - case CS7: - up->curregs[R3] |= Rx7; - up->curregs[R5] |= Tx7; - up->parity_mask = 0x7f; - break; - case CS8: - default: - up->curregs[R3] |= Rx8; - up->curregs[R5] |= Tx8; - up->parity_mask = 0xff; - break; - }; - up->curregs[R4] &= ~0x0c; - if (cflag & CSTOPB) - up->curregs[R4] |= SB2; - else - up->curregs[R4] |= SB1; - if (cflag & PARENB) - up->curregs[R4] |= PAR_ENAB; - else - up->curregs[R4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - up->curregs[R4] |= PAR_EVEN; - else - up->curregs[R4] &= ~PAR_EVEN; - - up->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - up->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= BRK_ABRT; - - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask = 0xff; -} - -/* The port lock is not held. */ -static void -sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - unsigned long flags; - int baud, brg; - - baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - - spin_lock_irqsave(&up->port.lock, flags); - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); - - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->flags |= SUNZILOG_FLAG_MODEM_STATUS; - else - up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; - - up->cflag = termios->c_cflag; - - sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *sunzilog_type(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - - return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void sunzilog_release_port(struct uart_port *port) -{ -} - -static int sunzilog_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void sunzilog_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL -static int sunzilog_get_poll_char(struct uart_port *port) -{ - unsigned char ch, r1; - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->control); - ZSDELAY(); - - /* This funny hack depends upon BRK_ABRT not interfering - * with the other bits we care about in R1. - */ - if (ch & BRK_ABRT) - r1 |= BRK_ABRT; - - if (!(ch & Rx_CH_AV)) - return NO_POLL_CHAR; - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - return ch; -} - -static void sunzilog_put_poll_char(struct uart_port *port, - unsigned char ch) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; - - sunzilog_putchar(&up->port, ch); -} -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops sunzilog_pops = { - .tx_empty = sunzilog_tx_empty, - .set_mctrl = sunzilog_set_mctrl, - .get_mctrl = sunzilog_get_mctrl, - .stop_tx = sunzilog_stop_tx, - .start_tx = sunzilog_start_tx, - .stop_rx = sunzilog_stop_rx, - .enable_ms = sunzilog_enable_ms, - .break_ctl = sunzilog_break_ctl, - .startup = sunzilog_startup, - .shutdown = sunzilog_shutdown, - .set_termios = sunzilog_set_termios, - .type = sunzilog_type, - .release_port = sunzilog_release_port, - .request_port = sunzilog_request_port, - .config_port = sunzilog_config_port, - .verify_port = sunzilog_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = sunzilog_get_poll_char, - .poll_put_char = sunzilog_put_poll_char, -#endif -}; - -static int uart_chip_count; -static struct uart_sunzilog_port *sunzilog_port_table; -static struct zilog_layout __iomem **sunzilog_chip_regs; - -static struct uart_sunzilog_port *sunzilog_irq_chain; - -static struct uart_driver sunzilog_reg = { - .owner = THIS_MODULE, - .driver_name = "sunzilog", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static int __init sunzilog_alloc_tables(int num_sunzilog) -{ - struct uart_sunzilog_port *up; - unsigned long size; - int num_channels = num_sunzilog * 2; - int i; - - size = num_channels * sizeof(struct uart_sunzilog_port); - sunzilog_port_table = kzalloc(size, GFP_KERNEL); - if (!sunzilog_port_table) - return -ENOMEM; - - for (i = 0; i < num_channels; i++) { - up = &sunzilog_port_table[i]; - - spin_lock_init(&up->port.lock); - - if (i == 0) - sunzilog_irq_chain = up; - - if (i < num_channels - 1) - up->next = up + 1; - else - up->next = NULL; - } - - size = num_sunzilog * sizeof(struct zilog_layout __iomem *); - sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); - if (!sunzilog_chip_regs) { - kfree(sunzilog_port_table); - sunzilog_irq_chain = NULL; - return -ENOMEM; - } - - return 0; -} - -static void sunzilog_free_tables(void) -{ - kfree(sunzilog_port_table); - sunzilog_irq_chain = NULL; - kfree(sunzilog_chip_regs); -} - -#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ - -static void sunzilog_putchar(struct uart_port *port, int ch) -{ - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - int loops = ZS_PUT_CHAR_MAX_DELAY; - - /* This is a timed polling loop so do not switch the explicit - * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM - */ - do { - unsigned char val = readb(&channel->control); - if (val & Tx_BUF_EMP) { - ZSDELAY(); - break; - } - udelay(5); - } while (--loops); - - writeb(ch, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); -} - -#ifdef CONFIG_SERIO - -static DEFINE_SPINLOCK(sunzilog_serio_lock); - -static int sunzilog_serio_write(struct serio *serio, unsigned char ch) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - - sunzilog_putchar(&up->port, ch); - - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); - - return 0; -} - -static int sunzilog_serio_open(struct serio *serio) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - if (!up->serio_open) { - up->serio_open = 1; - ret = 0; - } else - ret = -EBUSY; - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); - - return ret; -} - -static void sunzilog_serio_close(struct serio *serio) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - up->serio_open = 0; - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); -} - -#endif /* CONFIG_SERIO */ - -#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE -static void -sunzilog_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - uart_console_write(&up->port, s, count, sunzilog_putchar); - udelay(2); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init sunzilog_console_setup(struct console *con, char *options) -{ - struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - unsigned long flags; - int baud, brg; - - if (up->port.type != PORT_SUNZILOG) - return -1; - - printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", - (sunzilog_reg.minor - 64) + con->index, con->index); - - /* Get firmware console settings. */ - sunserial_console_termios(con, up->port.dev->of_node); - - /* Firmware console speed is limited to 150-->38400 baud so - * this hackish cflag thing is OK. - */ - switch (con->cflag & CBAUD) { - case B150: baud = 150; break; - case B300: baud = 300; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - default: case B9600: baud = 9600; break; - case B19200: baud = 19200; break; - case B38400: baud = 38400; break; - }; - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - spin_lock_irqsave(&up->port.lock, flags); - - up->curregs[R15] |= BRKIE; - sunzilog_convert_to_zs(up, con->cflag, 0, brg); - - sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - __sunzilog_startup(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static struct console sunzilog_console_ops = { - .name = "ttyS", - .write = sunzilog_console_write, - .device = uart_console_device, - .setup = sunzilog_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunzilog_reg, -}; - -static inline struct console *SUNZILOG_CONSOLE(void) -{ - return &sunzilog_console_ops; -} - -#else -#define SUNZILOG_CONSOLE() (NULL) -#endif - -static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) -{ - int baud, brg; - - if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { - up->cflag = B1200 | CS8 | CLOCAL | CREAD; - baud = 1200; - } else { - up->cflag = B4800 | CS8 | CLOCAL | CREAD; - baud = 4800; - } - - up->curregs[R15] |= BRKIE; - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - sunzilog_convert_to_zs(up, up->cflag, 0, brg); - sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - __sunzilog_startup(up); -} - -#ifdef CONFIG_SERIO -static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) -{ - struct serio *serio = &up->serio; - - serio->port_data = up; - - serio->id.type = SERIO_RS232; - if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { - serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "zskbd", sizeof(serio->name)); - } else { - serio->id.proto = SERIO_SUN; - serio->id.extra = 1; - strlcpy(serio->name, "zsms", sizeof(serio->name)); - } - strlcpy(serio->phys, - ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? - "zs/serio0" : "zs/serio1"), - sizeof(serio->phys)); - - serio->write = sunzilog_serio_write; - serio->open = sunzilog_serio_open; - serio->close = sunzilog_serio_close; - serio->dev.parent = up->port.dev; - - serio_register_port(serio); -} -#endif - -static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) -{ - struct zilog_channel __iomem *channel; - unsigned long flags; - int baud, brg; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock_irqsave(&up->port.lock, flags); - if (ZS_IS_CHANNEL_A(up)) { - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); - (void) read_zsreg(channel, R0); - } - - if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | - SUNZILOG_FLAG_CONS_MOUSE)) { - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R6] = 0x00; /* SDLC Address */ - up->curregs[R7] = 0x7E; /* SDLC Flag */ - up->curregs[R9] = NV; - up->curregs[R7p] = 0x00; - sunzilog_init_kbdms(up); - /* Only enable interrupts if an ISR handler available */ - if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - } else { - /* Normal serial TTY. */ - up->parity_mask = 0xff; - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R6] = 0x00; /* SDLC Address */ - up->curregs[R7] = 0x7E; /* SDLC Flag */ - up->curregs[R9] = NV; - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - baud = 9600; - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRSRC | BRENAB; - up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ - up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; - if (__load_zsregs(channel, up->curregs)) { - up->flags |= SUNZILOG_FLAG_ESCC; - } - /* Only enable interrupts if an ISR handler available */ - if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - } - - spin_unlock_irqrestore(&up->port.lock, flags); - -#ifdef CONFIG_SERIO - if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | - SUNZILOG_FLAG_CONS_MOUSE)) - sunzilog_register_serio(up); -#endif -} - -static int zilog_irq = -1; - -static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int kbm_inst, uart_inst; - int inst; - struct uart_sunzilog_port *up; - struct zilog_layout __iomem *rp; - int keyboard_mouse = 0; - int err; - - if (of_find_property(op->dev.of_node, "keyboard", NULL)) - keyboard_mouse = 1; - - /* uarts must come before keyboards/mice */ - if (keyboard_mouse) - inst = uart_chip_count + kbm_inst; - else - inst = uart_inst; - - sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, - sizeof(struct zilog_layout), - "zs"); - if (!sunzilog_chip_regs[inst]) - return -ENOMEM; - - rp = sunzilog_chip_regs[inst]; - - if (zilog_irq == -1) - zilog_irq = op->archdata.irqs[0]; - - up = &sunzilog_port_table[inst * 2]; - - /* Channel A */ - up[0].port.mapbase = op->resource[0].start + 0x00; - up[0].port.membase = (void __iomem *) &rp->channelA; - up[0].port.iotype = UPIO_MEM; - up[0].port.irq = op->archdata.irqs[0]; - up[0].port.uartclk = ZS_CLOCK; - up[0].port.fifosize = 1; - up[0].port.ops = &sunzilog_pops; - up[0].port.type = PORT_SUNZILOG; - up[0].port.flags = 0; - up[0].port.line = (inst * 2) + 0; - up[0].port.dev = &op->dev; - up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; - if (keyboard_mouse) - up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; - sunzilog_init_hw(&up[0]); - - /* Channel B */ - up[1].port.mapbase = op->resource[0].start + 0x04; - up[1].port.membase = (void __iomem *) &rp->channelB; - up[1].port.iotype = UPIO_MEM; - up[1].port.irq = op->archdata.irqs[0]; - up[1].port.uartclk = ZS_CLOCK; - up[1].port.fifosize = 1; - up[1].port.ops = &sunzilog_pops; - up[1].port.type = PORT_SUNZILOG; - up[1].port.flags = 0; - up[1].port.line = (inst * 2) + 1; - up[1].port.dev = &op->dev; - up[1].flags |= 0; - if (keyboard_mouse) - up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; - sunzilog_init_hw(&up[1]); - - if (!keyboard_mouse) { - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, - &sunzilog_reg, up[0].port.line, - false)) - up->flags |= SUNZILOG_FLAG_IS_CONS; - err = uart_add_one_port(&sunzilog_reg, &up[0].port); - if (err) { - of_iounmap(&op->resource[0], - rp, sizeof(struct zilog_layout)); - return err; - } - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, - &sunzilog_reg, up[1].port.line, - false)) - up->flags |= SUNZILOG_FLAG_IS_CONS; - err = uart_add_one_port(&sunzilog_reg, &up[1].port); - if (err) { - uart_remove_one_port(&sunzilog_reg, &up[0].port); - of_iounmap(&op->resource[0], - rp, sizeof(struct zilog_layout)); - return err; - } - uart_inst++; - } else { - printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " - "is a %s\n", - dev_name(&op->dev), - (unsigned long long) up[0].port.mapbase, - op->archdata.irqs[0], sunzilog_type(&up[0].port)); - printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " - "is a %s\n", - dev_name(&op->dev), - (unsigned long long) up[1].port.mapbase, - op->archdata.irqs[0], sunzilog_type(&up[1].port)); - kbm_inst++; - } - - dev_set_drvdata(&op->dev, &up[0]); - - return 0; -} - -static void __devexit zs_remove_one(struct uart_sunzilog_port *up) -{ - if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { -#ifdef CONFIG_SERIO - serio_unregister_port(&up->serio); -#endif - } else - uart_remove_one_port(&sunzilog_reg, &up->port); -} - -static int __devexit zs_remove(struct platform_device *op) -{ - struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev); - struct zilog_layout __iomem *regs; - - zs_remove_one(&up[0]); - zs_remove_one(&up[1]); - - regs = sunzilog_chip_regs[up[0].port.line / 2]; - of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id zs_match[] = { - { - .name = "zs", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, zs_match); - -static struct of_platform_driver zs_driver = { - .driver = { - .name = "zs", - .owner = THIS_MODULE, - .of_match_table = zs_match, - }, - .probe = zs_probe, - .remove = __devexit_p(zs_remove), -}; - -static int __init sunzilog_init(void) -{ - struct device_node *dp; - int err; - int num_keybms = 0; - int num_sunzilog = 0; - - for_each_node_by_name(dp, "zs") { - num_sunzilog++; - if (of_find_property(dp, "keyboard", NULL)) - num_keybms++; - } - - if (num_sunzilog) { - err = sunzilog_alloc_tables(num_sunzilog); - if (err) - goto out; - - uart_chip_count = num_sunzilog - num_keybms; - - err = sunserial_register_minors(&sunzilog_reg, - uart_chip_count * 2); - if (err) - goto out_free_tables; - } - - err = of_register_platform_driver(&zs_driver); - if (err) - goto out_unregister_uart; - - if (zilog_irq != -1) { - struct uart_sunzilog_port *up = sunzilog_irq_chain; - err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, - "zs", sunzilog_irq_chain); - if (err) - goto out_unregister_driver; - - /* Enable Interrupts */ - while (up) { - struct zilog_channel __iomem *channel; - - /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->flags |= SUNZILOG_FLAG_ISR_HANDLER; - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - up = up->next; - } - } - -out: - return err; - -out_unregister_driver: - of_unregister_platform_driver(&zs_driver); - -out_unregister_uart: - if (num_sunzilog) { - sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); - sunzilog_reg.cons = NULL; - } - -out_free_tables: - sunzilog_free_tables(); - goto out; -} - -static void __exit sunzilog_exit(void) -{ - of_unregister_platform_driver(&zs_driver); - - if (zilog_irq != -1) { - struct uart_sunzilog_port *up = sunzilog_irq_chain; - - /* Disable Interrupts */ - while (up) { - struct zilog_channel __iomem *channel; - - /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; - up->curregs[R9] &= ~MIE; - write_zsreg(channel, R9, up->curregs[R9]); - up = up->next; - } - - free_irq(zilog_irq, sunzilog_irq_chain); - zilog_irq = -1; - } - - if (sunzilog_reg.nr) { - sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); - sunzilog_free_tables(); - } -} - -module_init(sunzilog_init); -module_exit(sunzilog_exit); - -MODULE_AUTHOR("David S. Miller"); -MODULE_DESCRIPTION("Sun Zilog serial port driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h deleted file mode 100644 index 5dec7b4..0000000 --- a/drivers/serial/sunzilog.h +++ /dev/null @@ -1,289 +0,0 @@ -#ifndef _SUNZILOG_H -#define _SUNZILOG_H - -struct zilog_channel { - volatile unsigned char control; - volatile unsigned char __pad1; - volatile unsigned char data; - volatile unsigned char __pad2; -}; - -struct zilog_layout { - struct zilog_channel channelB; - struct zilog_channel channelA; -}; - -#define NUM_ZSREGS 17 -#define R7p 16 /* Written as R7 with P15 bit 0 set */ - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENAB 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 7' (ESCC Only) */ -#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */ -#define AUTO_EOM_RST 2 /* Automatic EOM Reset */ -#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */ -#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */ -#define nDTRnREQ 0x10 /* /DTR/REQ timing */ -#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */ -#define EXT_RD_EN 0x40 /* Extended read register enable */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define WR7pEN 1 /* WR7' Enable (ESCC only) */ -#define ZCIE 2 /* Zero count IE */ -#define FIFOEN 4 /* FIFO Enable (ESCC only) */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x0e - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 6 (LSB frame byte count [Not on NMOS]) */ - -/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ - udelay(2); \ - sbus_readb(&channel->data); \ - udelay(2); \ - sbus_readb(&channel->data); \ - udelay(2); } while(0) - -#endif /* _SUNZILOG_H */ diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c deleted file mode 100644 index 1f36b7e..0000000 --- a/drivers/serial/timbuart.c +++ /dev/null @@ -1,531 +0,0 @@ -/* - * timbuart.c timberdale FPGA UART driver - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Timberdale FPGA UART - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "timbuart.h" - -struct timbuart_port { - struct uart_port port; - struct tasklet_struct tasklet; - int usedma; - u32 last_ier; - struct platform_device *dev; -}; - -static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, - 921600, 1843200, 3250000}; - -static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); - -static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); - -static void timbuart_stop_rx(struct uart_port *port) -{ - /* spin lock held by upper layer, disable all RX interrupts */ - u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; - iowrite32(ier, port->membase + TIMBUART_IER); -} - -static void timbuart_stop_tx(struct uart_port *port) -{ - /* spinlock held by upper layer, disable TX interrupt */ - u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; - iowrite32(ier, port->membase + TIMBUART_IER); -} - -static void timbuart_start_tx(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - - /* do not transfer anything here -> fire off the tasklet */ - tasklet_schedule(&uart->tasklet); -} - -static unsigned int timbuart_tx_empty(struct uart_port *port) -{ - u32 isr = ioread32(port->membase + TIMBUART_ISR); - - return (isr & TXBE) ? TIOCSER_TEMT : 0; -} - -static void timbuart_flush_buffer(struct uart_port *port) -{ - if (!timbuart_tx_empty(port)) { - u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | - TIMBUART_CTRL_FLSHTX; - - iowrite8(ctl, port->membase + TIMBUART_CTRL); - iowrite32(TXBF, port->membase + TIMBUART_ISR); - } -} - -static void timbuart_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - - while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { - u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); - port->icount.rx++; - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - - spin_unlock(&port->lock); - tty_flip_buffer_push(port->state->port.tty); - spin_lock(&port->lock); - - dev_dbg(port->dev, "%s - total read %d bytes\n", - __func__, port->icount.rx); -} - -static void timbuart_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && - !uart_circ_empty(xmit)) { - iowrite8(xmit->buf[xmit->tail], - port->membase + TIMBUART_TXFIFO); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - dev_dbg(port->dev, - "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", - __func__, - port->icount.tx, - ioread8(port->membase + TIMBUART_CTRL), - port->mctrl & TIOCM_RTS, - ioread8(port->membase + TIMBUART_BAUDRATE)); -} - -static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - if (port->x_char) - return; - - if (isr & TXFLAGS) { - timbuart_tx_chars(port); - /* clear all TX interrupts */ - iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - } else - /* Re-enable any tx interrupt */ - *ier |= uart->last_ier & TXFLAGS; - - /* enable interrupts if there are chars in the transmit buffer, - * Or if we delivered some bytes and want the almost empty interrupt - * we wake up the upper layer later when we got the interrupt - * to give it some time to go out... - */ - if (!uart_circ_empty(xmit)) - *ier |= TXBAE; - - dev_dbg(port->dev, "%s - leaving\n", __func__); -} - -void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) -{ - if (isr & RXFLAGS) { - /* Some RX status is set */ - if (isr & RXBF) { - u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | - TIMBUART_CTRL_FLSHRX; - iowrite8(ctl, port->membase + TIMBUART_CTRL); - port->icount.overrun++; - } else if (isr & (RXDP)) - timbuart_rx_chars(port); - - /* ack all RX interrupts */ - iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); - } - - /* always have the RX interrupts enabled */ - *ier |= RXBAF | RXBF | RXTT; - - dev_dbg(port->dev, "%s - leaving\n", __func__); -} - -void timbuart_tasklet(unsigned long arg) -{ - struct timbuart_port *uart = (struct timbuart_port *)arg; - u32 isr, ier = 0; - - spin_lock(&uart->port.lock); - - isr = ioread32(uart->port.membase + TIMBUART_ISR); - dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); - - if (!uart->usedma) - timbuart_handle_tx_port(&uart->port, isr, &ier); - - timbuart_mctrl_check(&uart->port, isr, &ier); - - if (!uart->usedma) - timbuart_handle_rx_port(&uart->port, isr, &ier); - - iowrite32(ier, uart->port.membase + TIMBUART_IER); - - spin_unlock(&uart->port.lock); - dev_dbg(uart->port.dev, "%s leaving\n", __func__); -} - -static unsigned int timbuart_get_mctrl(struct uart_port *port) -{ - u8 cts = ioread8(port->membase + TIMBUART_CTRL); - dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); - - if (cts & TIMBUART_CTRL_CTS) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); - - if (mctrl & TIOCM_RTS) - iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); - else - iowrite8(0, port->membase + TIMBUART_CTRL); -} - -static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) -{ - unsigned int cts; - - if (isr & CTS_DELTA) { - /* ack */ - iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); - cts = timbuart_get_mctrl(port); - uart_handle_cts_change(port, cts & TIOCM_CTS); - wake_up_interruptible(&port->state->port.delta_msr_wait); - } - - *ier |= CTS_DELTA; -} - -static void timbuart_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void timbuart_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static int timbuart_startup(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - - dev_dbg(port->dev, "%s\n", __func__); - - iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); - iowrite32(0x1ff, port->membase + TIMBUART_ISR); - /* Enable all but TX interrupts */ - iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, - port->membase + TIMBUART_IER); - - return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, - "timb-uart", uart); -} - -static void timbuart_shutdown(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - dev_dbg(port->dev, "%s\n", __func__); - free_irq(port->irq, uart); - iowrite32(0, port->membase + TIMBUART_IER); -} - -static int get_bindex(int baud) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(baudrates); i++) - if (baud <= baudrates[i]) - return i; - - return -1; -} - -static void timbuart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud; - short bindex; - unsigned long flags; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - bindex = get_bindex(baud); - dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); - - if (bindex < 0) - bindex = 0; - baud = baudrates[bindex]; - - /* The serial layer calls into this once with old = NULL when setting - up initially */ - if (old) - tty_termios_copy_hw(termios, old); - tty_termios_encode_baud_rate(termios, baud, baud); - - spin_lock_irqsave(&port->lock, flags); - iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); - uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *timbuart_type(struct uart_port *port) -{ - return port->type == PORT_UNKNOWN ? "timbuart" : NULL; -} - -/* We do not request/release mappings of the registers here, - * currently it's done in the proble function. - */ -static void timbuart_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = - resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - release_mem_region(port->mapbase, size); -} - -static int timbuart_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = - resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); - - if (!request_mem_region(port->mapbase, size, "timb-uart")) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_mem_region(port->mapbase, size); - return -ENOMEM; - } - } - - return 0; -} - -static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) -{ - struct timbuart_port *uart = (struct timbuart_port *)devid; - - if (ioread8(uart->port.membase + TIMBUART_IPR)) { - uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); - - /* disable interrupts, the tasklet enables them again */ - iowrite32(0, uart->port.membase + TIMBUART_IER); - - /* fire off bottom half */ - tasklet_schedule(&uart->tasklet); - - return IRQ_HANDLED; - } else - return IRQ_NONE; -} - -/* - * Configure/autoconfigure the port. - */ -static void timbuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_TIMBUART; - timbuart_request_port(port); - } -} - -static int timbuart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -static struct uart_ops timbuart_ops = { - .tx_empty = timbuart_tx_empty, - .set_mctrl = timbuart_set_mctrl, - .get_mctrl = timbuart_get_mctrl, - .stop_tx = timbuart_stop_tx, - .start_tx = timbuart_start_tx, - .flush_buffer = timbuart_flush_buffer, - .stop_rx = timbuart_stop_rx, - .enable_ms = timbuart_enable_ms, - .break_ctl = timbuart_break_ctl, - .startup = timbuart_startup, - .shutdown = timbuart_shutdown, - .set_termios = timbuart_set_termios, - .type = timbuart_type, - .release_port = timbuart_release_port, - .request_port = timbuart_request_port, - .config_port = timbuart_config_port, - .verify_port = timbuart_verify_port -}; - -static struct uart_driver timbuart_driver = { - .owner = THIS_MODULE, - .driver_name = "timberdale_uart", - .dev_name = "ttyTU", - .major = TIMBUART_MAJOR, - .minor = TIMBUART_MINOR, - .nr = 1 -}; - -static int __devinit timbuart_probe(struct platform_device *dev) -{ - int err, irq; - struct timbuart_port *uart; - struct resource *iomem; - - dev_dbg(&dev->dev, "%s\n", __func__); - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - err = -EINVAL; - goto err_mem; - } - - uart->usedma = 0; - - uart->port.uartclk = 3250000 * 16; - uart->port.fifosize = TIMBUART_FIFO_SIZE; - uart->port.regshift = 2; - uart->port.iotype = UPIO_MEM; - uart->port.ops = &timbuart_ops; - uart->port.irq = 0; - uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; - uart->port.line = 0; - uart->port.dev = &dev->dev; - - iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!iomem) { - err = -ENOMEM; - goto err_register; - } - uart->port.mapbase = iomem->start; - uart->port.membase = NULL; - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - err = -EINVAL; - goto err_register; - } - uart->port.irq = irq; - - tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); - - err = uart_register_driver(&timbuart_driver); - if (err) - goto err_register; - - err = uart_add_one_port(&timbuart_driver, &uart->port); - if (err) - goto err_add_port; - - platform_set_drvdata(dev, uart); - - return 0; - -err_add_port: - uart_unregister_driver(&timbuart_driver); -err_register: - kfree(uart); -err_mem: - printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", - err); - - return err; -} - -static int __devexit timbuart_remove(struct platform_device *dev) -{ - struct timbuart_port *uart = platform_get_drvdata(dev); - - tasklet_kill(&uart->tasklet); - uart_remove_one_port(&timbuart_driver, &uart->port); - uart_unregister_driver(&timbuart_driver); - kfree(uart); - - return 0; -} - -static struct platform_driver timbuart_platform_driver = { - .driver = { - .name = "timb-uart", - .owner = THIS_MODULE, - }, - .probe = timbuart_probe, - .remove = __devexit_p(timbuart_remove), -}; - -/*--------------------------------------------------------------------------*/ - -static int __init timbuart_init(void) -{ - return platform_driver_register(&timbuart_platform_driver); -} - -static void __exit timbuart_exit(void) -{ - platform_driver_unregister(&timbuart_platform_driver); -} - -module_init(timbuart_init); -module_exit(timbuart_exit); - -MODULE_DESCRIPTION("Timberdale UART driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:timb-uart"); - diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h deleted file mode 100644 index 7e56676..0000000 --- a/drivers/serial/timbuart.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * timbuart.c timberdale FPGA GPIO driver - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Timberdale FPGA UART - */ - -#ifndef _TIMBUART_H -#define _TIMBUART_H - -#define TIMBUART_FIFO_SIZE 2048 - -#define TIMBUART_RXFIFO 0x08 -#define TIMBUART_TXFIFO 0x0c -#define TIMBUART_IER 0x10 -#define TIMBUART_IPR 0x14 -#define TIMBUART_ISR 0x18 -#define TIMBUART_CTRL 0x1c -#define TIMBUART_BAUDRATE 0x20 - -#define TIMBUART_CTRL_RTS 0x01 -#define TIMBUART_CTRL_CTS 0x02 -#define TIMBUART_CTRL_FLSHTX 0x40 -#define TIMBUART_CTRL_FLSHRX 0x80 - -#define TXBF 0x01 -#define TXBAE 0x02 -#define CTS_DELTA 0x04 -#define RXDP 0x08 -#define RXBAF 0x10 -#define RXBF 0x20 -#define RXTT 0x40 -#define RXBNAE 0x80 -#define TXBE 0x100 - -#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) -#define TXFLAGS (TXBF | TXBAE) - -#define TIMBUART_MAJOR 204 -#define TIMBUART_MINOR 192 - -#endif /* _TIMBUART_H */ - diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c deleted file mode 100644 index d2fce86..0000000 --- a/drivers/serial/uartlite.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * uartlite.c: Serial driver for Xilinx uartlite serial controller - * - * Copyright (C) 2006 Peter Korsgaard - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) -#include -#include -#include -#include - -/* Match table for of_platform binding */ -static struct of_device_id ulite_of_match[] __devinitdata = { - { .compatible = "xlnx,opb-uartlite-1.00.b", }, - { .compatible = "xlnx,xps-uartlite-1.00.a", }, - {} -}; -MODULE_DEVICE_TABLE(of, ulite_of_match); - -#endif - -#define ULITE_NAME "ttyUL" -#define ULITE_MAJOR 204 -#define ULITE_MINOR 187 -#define ULITE_NR_UARTS 4 - -/* --------------------------------------------------------------------- - * Register definitions - * - * For register details see datasheet: - * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf - */ - -#define ULITE_RX 0x00 -#define ULITE_TX 0x04 -#define ULITE_STATUS 0x08 -#define ULITE_CONTROL 0x0c - -#define ULITE_REGION 16 - -#define ULITE_STATUS_RXVALID 0x01 -#define ULITE_STATUS_RXFULL 0x02 -#define ULITE_STATUS_TXEMPTY 0x04 -#define ULITE_STATUS_TXFULL 0x08 -#define ULITE_STATUS_IE 0x10 -#define ULITE_STATUS_OVERRUN 0x20 -#define ULITE_STATUS_FRAME 0x40 -#define ULITE_STATUS_PARITY 0x80 - -#define ULITE_CONTROL_RST_TX 0x01 -#define ULITE_CONTROL_RST_RX 0x02 -#define ULITE_CONTROL_IE 0x10 - - -static struct uart_port ulite_ports[ULITE_NR_UARTS]; - -/* --------------------------------------------------------------------- - * Core UART driver operations - */ - -static int ulite_receive(struct uart_port *port, int stat) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned char ch = 0; - char flag = TTY_NORMAL; - - if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN - | ULITE_STATUS_FRAME)) == 0) - return 0; - - /* stats */ - if (stat & ULITE_STATUS_RXVALID) { - port->icount.rx++; - ch = ioread32be(port->membase + ULITE_RX); - - if (stat & ULITE_STATUS_PARITY) - port->icount.parity++; - } - - if (stat & ULITE_STATUS_OVERRUN) - port->icount.overrun++; - - if (stat & ULITE_STATUS_FRAME) - port->icount.frame++; - - - /* drop byte with parity error if IGNPAR specificed */ - if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY) - stat &= ~ULITE_STATUS_RXVALID; - - stat &= port->read_status_mask; - - if (stat & ULITE_STATUS_PARITY) - flag = TTY_PARITY; - - - stat &= ~port->ignore_status_mask; - - if (stat & ULITE_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, flag); - - if (stat & ULITE_STATUS_FRAME) - tty_insert_flip_char(tty, 0, TTY_FRAME); - - if (stat & ULITE_STATUS_OVERRUN) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - - return 1; -} - -static int ulite_transmit(struct uart_port *port, int stat) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (stat & ULITE_STATUS_TXFULL) - return 0; - - if (port->x_char) { - iowrite32be(port->x_char, port->membase + ULITE_TX); - port->x_char = 0; - port->icount.tx++; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return 0; - - iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - port->icount.tx++; - - /* wake up */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - return 1; -} - -static irqreturn_t ulite_isr(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - int busy, n = 0; - - do { - int stat = ioread32be(port->membase + ULITE_STATUS); - busy = ulite_receive(port, stat); - busy |= ulite_transmit(port, stat); - n++; - } while (busy); - - /* work done? */ - if (n > 1) { - tty_flip_buffer_push(port->state->port.tty); - return IRQ_HANDLED; - } else { - return IRQ_NONE; - } -} - -static unsigned int ulite_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - ret = ioread32be(port->membase + ULITE_STATUS); - spin_unlock_irqrestore(&port->lock, flags); - - return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0; -} - -static unsigned int ulite_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void ulite_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static void ulite_start_tx(struct uart_port *port) -{ - ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS)); -} - -static void ulite_stop_rx(struct uart_port *port) -{ - /* don't forward any more data (like !CREAD) */ - port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; -} - -static void ulite_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void ulite_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static int ulite_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, ulite_isr, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); - if (ret) - return ret; - - iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX, - port->membase + ULITE_CONTROL); - iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); - - return 0; -} - -static void ulite_shutdown(struct uart_port *port) -{ - iowrite32be(0, port->membase + ULITE_CONTROL); - ioread32be(port->membase + ULITE_CONTROL); /* dummy */ - free_irq(port->irq, port); -} - -static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud; - - spin_lock_irqsave(&port->lock, flags); - - port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN - | ULITE_STATUS_TXFULL; - - if (termios->c_iflag & INPCK) - port->read_status_mask |= - ULITE_STATUS_PARITY | ULITE_STATUS_FRAME; - - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; - - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= - ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; - - /* update timeout */ - baud = uart_get_baud_rate(port, termios, old, 0, 460800); - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *ulite_type(struct uart_port *port) -{ - return port->type == PORT_UARTLITE ? "uartlite" : NULL; -} - -static void ulite_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, ULITE_REGION); - iounmap(port->membase); - port->membase = NULL; -} - -static int ulite_request_port(struct uart_port *port) -{ - pr_debug("ulite console: port=%p; port->mapbase=%llx\n", - port, (unsigned long long) port->mapbase); - - if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = ioremap(port->mapbase, ULITE_REGION); - if (!port->membase) { - dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, ULITE_REGION); - return -EBUSY; - } - - return 0; -} - -static void ulite_config_port(struct uart_port *port, int flags) -{ - if (!ulite_request_port(port)) - port->type = PORT_UARTLITE; -} - -static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL -static int ulite_get_poll_char(struct uart_port *port) -{ - if (!(ioread32be(port->membase + ULITE_STATUS) - & ULITE_STATUS_RXVALID)) - return NO_POLL_CHAR; - - return ioread32be(port->membase + ULITE_RX); -} - -static void ulite_put_poll_char(struct uart_port *port, unsigned char ch) -{ - while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL) - cpu_relax(); - - /* write char to device */ - iowrite32be(ch, port->membase + ULITE_TX); -} -#endif - -static struct uart_ops ulite_ops = { - .tx_empty = ulite_tx_empty, - .set_mctrl = ulite_set_mctrl, - .get_mctrl = ulite_get_mctrl, - .stop_tx = ulite_stop_tx, - .start_tx = ulite_start_tx, - .stop_rx = ulite_stop_rx, - .enable_ms = ulite_enable_ms, - .break_ctl = ulite_break_ctl, - .startup = ulite_startup, - .shutdown = ulite_shutdown, - .set_termios = ulite_set_termios, - .type = ulite_type, - .release_port = ulite_release_port, - .request_port = ulite_request_port, - .config_port = ulite_config_port, - .verify_port = ulite_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = ulite_get_poll_char, - .poll_put_char = ulite_put_poll_char, -#endif -}; - -/* --------------------------------------------------------------------- - * Console driver operations - */ - -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE -static void ulite_console_wait_tx(struct uart_port *port) -{ - int i; - u8 val; - - /* Spin waiting for TX fifo to have space available */ - for (i = 0; i < 100000; i++) { - val = ioread32be(port->membase + ULITE_STATUS); - if ((val & ULITE_STATUS_TXFULL) == 0) - break; - cpu_relax(); - } -} - -static void ulite_console_putchar(struct uart_port *port, int ch) -{ - ulite_console_wait_tx(port); - iowrite32be(ch, port->membase + ULITE_TX); -} - -static void ulite_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = &ulite_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - if (oops_in_progress) { - locked = spin_trylock_irqsave(&port->lock, flags); - } else - spin_lock_irqsave(&port->lock, flags); - - /* save and disable interrupt */ - ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE; - iowrite32be(0, port->membase + ULITE_CONTROL); - - uart_console_write(port, s, count, ulite_console_putchar); - - ulite_console_wait_tx(port); - - /* restore interrupt state */ - if (ier) - iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); - - if (locked) - spin_unlock_irqrestore(&port->lock, flags); -} - -static int __devinit ulite_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= ULITE_NR_UARTS) - return -EINVAL; - - port = &ulite_ports[co->index]; - - /* Has the device been initialized yet? */ - if (!port->mapbase) { - pr_debug("console on ttyUL%i not present\n", co->index); - return -ENODEV; - } - - /* not initialized yet? */ - if (!port->membase) { - if (ulite_request_port(port)) - return -ENODEV; - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver ulite_uart_driver; - -static struct console ulite_console = { - .name = ULITE_NAME, - .write = ulite_console_write, - .device = uart_console_device, - .setup = ulite_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */ - .data = &ulite_uart_driver, -}; - -static int __init ulite_console_init(void) -{ - register_console(&ulite_console); - return 0; -} - -console_initcall(ulite_console_init); - -#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */ - -static struct uart_driver ulite_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "uartlite", - .dev_name = ULITE_NAME, - .major = ULITE_MAJOR, - .minor = ULITE_MINOR, - .nr = ULITE_NR_UARTS, -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE - .cons = &ulite_console, -#endif -}; - -/* --------------------------------------------------------------------- - * Port assignment functions (mapping devices to uart_port structures) - */ - -/** ulite_assign: register a uartlite device with the driver - * - * @dev: pointer to device structure - * @id: requested id number. Pass -1 for automatic port assignment - * @base: base address of uartlite registers - * @irq: irq number for uartlite - * - * Returns: 0 on success, <0 otherwise - */ -static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) -{ - struct uart_port *port; - int rc; - - /* if id = -1; then scan for a free id and use that */ - if (id < 0) { - for (id = 0; id < ULITE_NR_UARTS; id++) - if (ulite_ports[id].mapbase == 0) - break; - } - if (id < 0 || id >= ULITE_NR_UARTS) { - dev_err(dev, "%s%i too large\n", ULITE_NAME, id); - return -EINVAL; - } - - if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { - dev_err(dev, "cannot assign to %s%i; it is already in use\n", - ULITE_NAME, id); - return -EBUSY; - } - - port = &ulite_ports[id]; - - spin_lock_init(&port->lock); - port->fifosize = 16; - port->regshift = 2; - port->iotype = UPIO_MEM; - port->iobase = 1; /* mark port in use */ - port->mapbase = base; - port->membase = NULL; - port->ops = &ulite_ops; - port->irq = irq; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = dev; - port->type = PORT_UNKNOWN; - port->line = id; - - dev_set_drvdata(dev, port); - - /* Register the port */ - rc = uart_add_one_port(&ulite_uart_driver, port); - if (rc) { - dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); - port->mapbase = 0; - dev_set_drvdata(dev, NULL); - return rc; - } - - return 0; -} - -/** ulite_release: register a uartlite device with the driver - * - * @dev: pointer to device structure - */ -static int __devexit ulite_release(struct device *dev) -{ - struct uart_port *port = dev_get_drvdata(dev); - int rc = 0; - - if (port) { - rc = uart_remove_one_port(&ulite_uart_driver, port); - dev_set_drvdata(dev, NULL); - port->mapbase = 0; - } - - return rc; -} - -/* --------------------------------------------------------------------- - * Platform bus binding - */ - -static int __devinit ulite_probe(struct platform_device *pdev) -{ - struct resource *res, *res2; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; - - return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); -} - -static int __devexit ulite_remove(struct platform_device *pdev) -{ - return ulite_release(&pdev->dev); -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:uartlite"); - -static struct platform_driver ulite_platform_driver = { - .probe = ulite_probe, - .remove = __devexit_p(ulite_remove), - .driver = { - .owner = THIS_MODULE, - .name = "uartlite", - }, -}; - -/* --------------------------------------------------------------------- - * OF bus bindings - */ -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) -static int __devinit -ulite_of_probe(struct platform_device *op, const struct of_device_id *match) -{ - struct resource res; - const unsigned int *id; - int irq, rc; - - dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); - - rc = of_address_to_resource(op->dev.of_node, 0, &res); - if (rc) { - dev_err(&op->dev, "invalid address\n"); - return rc; - } - - irq = irq_of_parse_and_map(op->dev.of_node, 0); - - id = of_get_property(op->dev.of_node, "port-number", NULL); - - return ulite_assign(&op->dev, id ? *id : -1, res.start, irq); -} - -static int __devexit ulite_of_remove(struct platform_device *op) -{ - return ulite_release(&op->dev); -} - -static struct of_platform_driver ulite_of_driver = { - .probe = ulite_of_probe, - .remove = __devexit_p(ulite_of_remove), - .driver = { - .name = "uartlite", - .owner = THIS_MODULE, - .of_match_table = ulite_of_match, - }, -}; - -/* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __init ulite_of_register(void) -{ - pr_debug("uartlite: calling of_register_platform_driver()\n"); - return of_register_platform_driver(&ulite_of_driver); -} - -static inline void __exit ulite_of_unregister(void) -{ - of_unregister_platform_driver(&ulite_of_driver); -} -#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ -/* Appropriate config not enabled; do nothing helpers */ -static inline int __init ulite_of_register(void) { return 0; } -static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ - -/* --------------------------------------------------------------------- - * Module setup/teardown - */ - -int __init ulite_init(void) -{ - int ret; - - pr_debug("uartlite: calling uart_register_driver()\n"); - ret = uart_register_driver(&ulite_uart_driver); - if (ret) - goto err_uart; - - ret = ulite_of_register(); - if (ret) - goto err_of; - - pr_debug("uartlite: calling platform_driver_register()\n"); - ret = platform_driver_register(&ulite_platform_driver); - if (ret) - goto err_plat; - - return 0; - -err_plat: - ulite_of_unregister(); -err_of: - uart_unregister_driver(&ulite_uart_driver); -err_uart: - printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); - return ret; -} - -void __exit ulite_exit(void) -{ - platform_driver_unregister(&ulite_platform_driver); - ulite_of_unregister(); - uart_unregister_driver(&ulite_uart_driver); -} - -module_init(ulite_init); -module_exit(ulite_exit); - -MODULE_AUTHOR("Peter Korsgaard "); -MODULE_DESCRIPTION("Xilinx uartlite serial driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c deleted file mode 100644 index 3f4848e..0000000 --- a/drivers/serial/ucc_uart.c +++ /dev/null @@ -1,1537 +0,0 @@ -/* - * Freescale QUICC Engine UART device driver - * - * Author: Timur Tabi - * - * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * This driver adds support for UART devices via Freescale's QUICC Engine - * found on some Freescale SOCs. - * - * If Soft-UART support is needed but not already present, then this driver - * will request and upload the "Soft-UART" microcode upon probe. The - * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" - * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, - * (e.g. "11" for 1.1). - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -/* - * The GUMR flag for Soft UART. This would normally be defined in qe.h, - * but Soft-UART is a hack and we want to keep everything related to it in - * this file. - */ -#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ - -/* - * soft_uart is 1 if we need to use Soft-UART mode - */ -static int soft_uart; -/* - * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. - */ -static int firmware_loaded; - -/* Enable this macro to configure all serial ports in internal loopback - mode */ -/* #define LOOPBACK */ - -/* The major and minor device numbers are defined in - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE - * UART, we have major number 204 and minor numbers 46 - 49, which are the - * same as for the CPM2. This decision was made because no Freescale part - * has both a CPM and a QE. - */ -#define SERIAL_QE_MAJOR 204 -#define SERIAL_QE_MINOR 46 - -/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ -#define UCC_MAX_UART 4 - -/* The number of buffer descriptors for receiving characters. */ -#define RX_NUM_FIFO 4 - -/* The number of buffer descriptors for transmitting characters. */ -#define TX_NUM_FIFO 4 - -/* The maximum size of the character buffer for a single RX BD. */ -#define RX_BUF_SIZE 32 - -/* The maximum size of the character buffer for a single TX BD. */ -#define TX_BUF_SIZE 32 - -/* - * The number of jiffies to wait after receiving a close command before the - * device is actually closed. This allows the last few characters to be - * sent over the wire. - */ -#define UCC_WAIT_CLOSING 100 - -struct ucc_uart_pram { - struct ucc_slow_pram common; - u8 res1[8]; /* reserved */ - __be16 maxidl; /* Maximum idle chars */ - __be16 idlc; /* temp idle counter */ - __be16 brkcr; /* Break count register */ - __be16 parec; /* receive parity error counter */ - __be16 frmec; /* receive framing error counter */ - __be16 nosec; /* receive noise counter */ - __be16 brkec; /* receive break condition counter */ - __be16 brkln; /* last received break length */ - __be16 uaddr[2]; /* UART address character 1 & 2 */ - __be16 rtemp; /* Temp storage */ - __be16 toseq; /* Transmit out of sequence char */ - __be16 cchars[8]; /* control characters 1-8 */ - __be16 rccm; /* receive control character mask */ - __be16 rccr; /* receive control character register */ - __be16 rlbc; /* receive last break character */ - __be16 res2; /* reserved */ - __be32 res3; /* reserved, should be cleared */ - u8 res4; /* reserved, should be cleared */ - u8 res5[3]; /* reserved, should be cleared */ - __be32 res6; /* reserved, should be cleared */ - __be32 res7; /* reserved, should be cleared */ - __be32 res8; /* reserved, should be cleared */ - __be32 res9; /* reserved, should be cleared */ - __be32 res10; /* reserved, should be cleared */ - __be32 res11; /* reserved, should be cleared */ - __be32 res12; /* reserved, should be cleared */ - __be32 res13; /* reserved, should be cleared */ -/* The rest is for Soft-UART only */ - __be16 supsmr; /* 0x90, Shadow UPSMR */ - __be16 res92; /* 0x92, reserved, initialize to 0 */ - __be32 rx_state; /* 0x94, RX state, initialize to 0 */ - __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ - u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ - u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ - u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ - u8 res14[0xBC - 0x9F]; /* reserved */ - __be32 dump_ptr; /* 0xBC, Dump pointer */ - __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ - u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ - u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ - __be16 tx_state; /* 0xC6, TX state */ - u8 res15[0xD0 - 0xC8]; /* reserved */ - __be32 resD0; /* 0xD0, reserved, initialize to 0 */ - u8 resD4; /* 0xD4, reserved, initialize to 0 */ - __be16 resD5; /* 0xD5, reserved, initialize to 0 */ -} __attribute__ ((packed)); - -/* SUPSMR definitions, for Soft-UART only */ -#define UCC_UART_SUPSMR_SL 0x8000 -#define UCC_UART_SUPSMR_RPM_MASK 0x6000 -#define UCC_UART_SUPSMR_RPM_ODD 0x0000 -#define UCC_UART_SUPSMR_RPM_LOW 0x2000 -#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 -#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 -#define UCC_UART_SUPSMR_PEN 0x1000 -#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 -#define UCC_UART_SUPSMR_TPM_ODD 0x0000 -#define UCC_UART_SUPSMR_TPM_LOW 0x0400 -#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 -#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 -#define UCC_UART_SUPSMR_FRZ 0x0100 -#define UCC_UART_SUPSMR_UM_MASK 0x00c0 -#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 -#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 -#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 -#define UCC_UART_SUPSMR_CL_MASK 0x0030 -#define UCC_UART_SUPSMR_CL_8 0x0030 -#define UCC_UART_SUPSMR_CL_7 0x0020 -#define UCC_UART_SUPSMR_CL_6 0x0010 -#define UCC_UART_SUPSMR_CL_5 0x0000 - -#define UCC_UART_TX_STATE_AHDLC 0x00 -#define UCC_UART_TX_STATE_UART 0x01 -#define UCC_UART_TX_STATE_X1 0x00 -#define UCC_UART_TX_STATE_X16 0x80 - -#define UCC_UART_PRAM_ALIGNMENT 0x100 - -#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD -#define NUM_CONTROL_CHARS 8 - -/* Private per-port data structure */ -struct uart_qe_port { - struct uart_port port; - struct ucc_slow __iomem *uccp; - struct ucc_uart_pram __iomem *uccup; - struct ucc_slow_info us_info; - struct ucc_slow_private *us_private; - struct device_node *np; - unsigned int ucc_num; /* First ucc is 0, not 1 */ - - u16 rx_nrfifos; - u16 rx_fifosize; - u16 tx_nrfifos; - u16 tx_fifosize; - int wait_closing; - u32 flags; - struct qe_bd *rx_bd_base; - struct qe_bd *rx_cur; - struct qe_bd *tx_bd_base; - struct qe_bd *tx_cur; - unsigned char *tx_buf; - unsigned char *rx_buf; - void *bd_virt; /* virtual address of the BD buffers */ - dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ - unsigned int bd_size; /* size of BD buffer space */ -}; - -static struct uart_driver ucc_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ucc_uart", - .dev_name = "ttyQE", - .major = SERIAL_QE_MAJOR, - .minor = SERIAL_QE_MINOR, - .nr = UCC_MAX_UART, -}; - -/* - * Virtual to physical address translation. - * - * Given the virtual address for a character buffer, this function returns - * the physical (DMA) equivalent. - */ -static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) -{ - if (likely((addr >= qe_port->bd_virt)) && - (addr < (qe_port->bd_virt + qe_port->bd_size))) - return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); - - /* something nasty happened */ - printk(KERN_ERR "%s: addr=%p\n", __func__, addr); - BUG(); - return 0; -} - -/* - * Physical to virtual address translation. - * - * Given the physical (DMA) address for a character buffer, this function - * returns the virtual equivalent. - */ -static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) -{ - /* sanity check */ - if (likely((addr >= qe_port->bd_dma_addr) && - (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) - return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); - - /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __func__, addr); - BUG(); - return NULL; -} - -/* - * Return 1 if the QE is done transmitting all buffers for this port - * - * This function scans each BD in sequence. If we find a BD that is not - * ready (READY=1), then we return 0 indicating that the QE is still sending - * data. If we reach the last BD (WRAP=1), then we know we've scanned - * the entire list, and all BDs are done. - */ -static unsigned int qe_uart_tx_empty(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct qe_bd *bdp = qe_port->tx_bd_base; - - while (1) { - if (in_be16(&bdp->status) & BD_SC_READY) - /* This BD is not done, so return "not done" */ - return 0; - - if (in_be16(&bdp->status) & BD_SC_WRAP) - /* - * This BD is done and it's the last one, so return - * "done" - */ - return 1; - - bdp++; - }; -} - -/* - * Set the modem control lines - * - * Although the QE can control the modem control lines (e.g. CTS), we - * don't need that support. This function must exist, however, otherwise - * the kernel will panic. - */ -void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/* - * Get the current modem control line status - * - * Although the QE can control the modem control lines (e.g. CTS), this - * driver currently doesn't support that, so we always return Carrier - * Detect, Data Set Ready, and Clear To Send. - */ -static unsigned int qe_uart_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -/* - * Disable the transmit interrupt. - * - * Although this function is called "stop_tx", it does not actually stop - * transmission of data. Instead, it tells the QE to not generate an - * interrupt when the UCC is finished sending characters. - */ -static void qe_uart_stop_tx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); -} - -/* - * Transmit as many characters to the HW as possible. - * - * This function will attempt to stuff of all the characters from the - * kernel's transmit buffer into TX BDs. - * - * A return value of non-zero indicates that it successfully stuffed all - * characters from the kernel buffer. - * - * A return value of zero indicates that there are still characters in the - * kernel's buffer that have not been transmitted, but there are no more BDs - * available. This function should be called again after a BD has been made - * available. - */ -static int qe_uart_tx_pump(struct uart_qe_port *qe_port) -{ - struct qe_bd *bdp; - unsigned char *p; - unsigned int count; - struct uart_port *port = &qe_port->port; - struct circ_buf *xmit = &port->state->xmit; - - bdp = qe_port->rx_cur; - - /* Handle xon/xoff */ - if (port->x_char) { - /* Pick next descriptor and fill from buffer */ - bdp = qe_port->tx_cur; - - p = qe2cpu_addr(bdp->buf, qe_port); - - *p++ = port->x_char; - out_be16(&bdp->length, 1); - setbits16(&bdp->status, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->tx_bd_base; - else - bdp++; - qe_port->tx_cur = bdp; - - port->icount.tx++; - port->x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - qe_uart_stop_tx(port); - return 0; - } - - /* Pick next descriptor and fill from buffer */ - bdp = qe_port->tx_cur; - - while (!(in_be16(&bdp->status) & BD_SC_READY) && - (xmit->tail != xmit->head)) { - count = 0; - p = qe2cpu_addr(bdp->buf, qe_port); - while (count < qe_port->tx_fifosize) { - *p++ = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - count++; - if (xmit->head == xmit->tail) - break; - } - - out_be16(&bdp->length, count); - setbits16(&bdp->status, BD_SC_READY); - - /* Get next BD. */ - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->tx_bd_base; - else - bdp++; - } - qe_port->tx_cur = bdp; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) { - /* The kernel buffer is empty, so turn off TX interrupts. We - don't need to be told when the QE is finished transmitting - the data. */ - qe_uart_stop_tx(port); - return 0; - } - - return 1; -} - -/* - * Start transmitting data - * - * This function will start transmitting any available data, if the port - * isn't already transmitting data. - */ -static void qe_uart_start_tx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - /* If we currently are transmitting, then just return */ - if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) - return; - - /* Otherwise, pump the port and start transmission */ - if (qe_uart_tx_pump(qe_port)) - setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); -} - -/* - * Stop transmitting data - */ -static void qe_uart_stop_rx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); -} - -/* - * Enable status change interrupts - * - * We don't support status change interrupts, but we need to define this - * function otherwise the kernel will panic. - */ -static void qe_uart_enable_ms(struct uart_port *port) -{ -} - -/* Start or stop sending break signal - * - * This function controls the sending of a break signal. If break_state=1, - * then we start sending a break signal. If break_state=0, then we stop - * sending the break signal. - */ -static void qe_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - if (break_state) - ucc_slow_stop_tx(qe_port->us_private); - else - ucc_slow_restart_tx(qe_port->us_private); -} - -/* ISR helper function for receiving character. - * - * This function is called by the ISR to handling receiving characters - */ -static void qe_uart_int_rx(struct uart_qe_port *qe_port) -{ - int i; - unsigned char ch, *cp; - struct uart_port *port = &qe_port->port; - struct tty_struct *tty = port->state->port.tty; - struct qe_bd *bdp; - u16 status; - unsigned int flg; - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = qe_port->rx_cur; - while (1) { - status = in_be16(&bdp->status); - - /* If this one is empty, then we assume we've read them all */ - if (status & BD_SC_EMPTY) - break; - - /* get number of characters, and check space in RX buffer */ - i = in_be16(&bdp->length); - - /* If we don't have enough room in RX buffer for the entire BD, - * then we try later, which will be the next RX interrupt. - */ - if (tty_buffer_request_room(tty, i) < i) { - dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); - return; - } - - /* get pointer */ - cp = qe2cpu_addr(bdp->buf, qe_port); - - /* loop through the buffer */ - while (i-- > 0) { - ch = *cp++; - port->icount.rx++; - flg = TTY_NORMAL; - - if (!i && status & - (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - continue; - -error_return: - tty_insert_flip_char(tty, ch, flg); - - } - - /* This BD is ready to be used again. Clear status. get next */ - clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | - BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->rx_bd_base; - else - bdp++; - - } - - /* Write back buffer pointer */ - qe_port->rx_cur = bdp; - - /* Activate BH processing */ - tty_flip_buffer_push(tty); - - return; - - /* Error processing */ - -handle_error: - /* Statistics */ - if (status & BD_SC_BR) - port->icount.brk++; - if (status & BD_SC_PR) - port->icount.parity++; - if (status & BD_SC_FR) - port->icount.frame++; - if (status & BD_SC_OV) - port->icount.overrun++; - - /* Mask out ignored conditions */ - status &= port->read_status_mask; - - /* Handle the remaining ones */ - if (status & BD_SC_BR) - flg = TTY_BREAK; - else if (status & BD_SC_PR) - flg = TTY_PARITY; - else if (status & BD_SC_FR) - flg = TTY_FRAME; - - /* Overrun does not affect the current character ! */ - if (status & BD_SC_OV) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -/* Interrupt handler - * - * This interrupt handler is called after a BD is processed. - */ -static irqreturn_t qe_uart_int(int irq, void *data) -{ - struct uart_qe_port *qe_port = (struct uart_qe_port *) data; - struct ucc_slow __iomem *uccp = qe_port->uccp; - u16 events; - - /* Clear the interrupts */ - events = in_be16(&uccp->ucce); - out_be16(&uccp->ucce, events); - - if (events & UCC_UART_UCCE_BRKE) - uart_handle_break(&qe_port->port); - - if (events & UCC_UART_UCCE_RX) - qe_uart_int_rx(qe_port); - - if (events & UCC_UART_UCCE_TX) - qe_uart_tx_pump(qe_port); - - return events ? IRQ_HANDLED : IRQ_NONE; -} - -/* Initialize buffer descriptors - * - * This function initializes all of the RX and TX buffer descriptors. - */ -static void qe_uart_initbd(struct uart_qe_port *qe_port) -{ - int i; - void *bd_virt; - struct qe_bd *bdp; - - /* Set the physical address of the host memory buffers in the buffer - * descriptors, and the virtual address for us to work with. - */ - bd_virt = qe_port->bd_virt; - bdp = qe_port->rx_bd_base; - qe_port->rx_cur = qe_port->rx_bd_base; - for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { - out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - bd_virt += qe_port->rx_fifosize; - bdp++; - } - - /* */ - out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bd_virt = qe_port->bd_virt + - L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); - qe_port->tx_cur = qe_port->tx_bd_base; - bdp = qe_port->tx_bd_base; - for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { - out_be16(&bdp->status, BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - bd_virt += qe_port->tx_fifosize; - bdp++; - } - - /* Loopback requires the preamble bit to be set on the first TX BD */ -#ifdef LOOPBACK - setbits16(&qe_port->tx_cur->status, BD_SC_P); -#endif - - out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); -} - -/* - * Initialize a UCC for UART. - * - * This function configures a given UCC to be used as a UART device. Basic - * UCC initialization is handled in qe_uart_request_port(). This function - * does all the UART-specific stuff. - */ -static void qe_uart_init_ucc(struct uart_qe_port *qe_port) -{ - u32 cecr_subblock; - struct ucc_slow __iomem *uccp = qe_port->uccp; - struct ucc_uart_pram *uccup = qe_port->uccup; - - unsigned int i; - - /* First, disable TX and RX in the UCC */ - ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); - - /* Program the UCC UART parameter RAM */ - out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); - out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); - out_be16(&uccup->common.mrblr, qe_port->rx_fifosize); - out_be16(&uccup->maxidl, 0x10); - out_be16(&uccup->brkcr, 1); - out_be16(&uccup->parec, 0); - out_be16(&uccup->frmec, 0); - out_be16(&uccup->nosec, 0); - out_be16(&uccup->brkec, 0); - out_be16(&uccup->uaddr[0], 0); - out_be16(&uccup->uaddr[1], 0); - out_be16(&uccup->toseq, 0); - for (i = 0; i < 8; i++) - out_be16(&uccup->cchars[i], 0xC000); - out_be16(&uccup->rccm, 0xc0ff); - - /* Configure the GUMR registers for UART */ - if (soft_uart) { - /* Soft-UART requires a 1X multiplier for TX */ - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, - UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); - } else { - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX, - UCC_SLOW_GUMR_H_RFW); - } - -#ifdef LOOPBACK - clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, - UCC_SLOW_GUMR_L_DIAG_LOOP); - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, - UCC_SLOW_GUMR_H_CDS); -#endif - - /* Disable rx interrupts and clear all pending events. */ - out_be16(&uccp->uccm, 0); - out_be16(&uccp->ucce, 0xffff); - out_be16(&uccp->udsr, 0x7e7e); - - /* Initialize UPSMR */ - out_be16(&uccp->upsmr, 0); - - if (soft_uart) { - out_be16(&uccup->supsmr, 0x30); - out_be16(&uccup->res92, 0); - out_be32(&uccup->rx_state, 0); - out_be32(&uccup->rx_cnt, 0); - out_8(&uccup->rx_bitmark, 0); - out_8(&uccup->rx_length, 10); - out_be32(&uccup->dump_ptr, 0x4000); - out_8(&uccup->rx_temp_dlst_qe, 0); - out_be32(&uccup->rx_frame_rem, 0); - out_8(&uccup->rx_frame_rem_size, 0); - /* Soft-UART requires TX to be 1X */ - out_8(&uccup->tx_mode, - UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1); - out_be16(&uccup->tx_state, 0); - out_8(&uccup->resD4, 0); - out_be16(&uccup->resD5, 0); - - /* Set UART mode. - * Enable receive and transmit. - */ - - /* From the microcode errata: - * 1.GUMR_L register, set mode=0010 (QMC). - * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). - * 3.Set GUMR_H[19:20] (Transparent mode) - * 4.Clear GUMR_H[26] (RFW) - * ... - * 6.Receiver must use 16x over sampling - */ - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, - UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | - UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); - -#ifdef LOOPBACK - clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, - UCC_SLOW_GUMR_L_DIAG_LOOP); - clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP | - UCC_SLOW_GUMR_H_CDS); -#endif - - cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); - qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, - QE_CR_PROTOCOL_UNSPECIFIED, 0); - } else { - cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); - qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, - QE_CR_PROTOCOL_UART, 0); - } -} - -/* - * Initialize the port. - */ -static int qe_uart_startup(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - int ret; - - /* - * If we're using Soft-UART mode, then we need to make sure the - * firmware has been uploaded first. - */ - if (soft_uart && !firmware_loaded) { - dev_err(port->dev, "Soft-UART firmware not uploaded\n"); - return -ENODEV; - } - - qe_uart_initbd(qe_port); - qe_uart_init_ucc(qe_port); - - /* Install interrupt handler. */ - ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", - qe_port); - if (ret) { - dev_err(port->dev, "could not claim IRQ %u\n", port->irq); - return ret; - } - - /* Startup rx-int */ - setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); - ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); - - return 0; -} - -/* - * Shutdown the port. - */ -static void qe_uart_shutdown(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow __iomem *uccp = qe_port->uccp; - unsigned int timeout = 20; - - /* Disable RX and TX */ - - /* Wait for all the BDs marked sent */ - while (!qe_uart_tx_empty(port)) { - if (!--timeout) { - dev_warn(port->dev, "shutdown timeout\n"); - break; - } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2); - } - - if (qe_port->wait_closing) { - /* Wait a bit longer */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(qe_port->wait_closing); - } - - /* Stop uarts */ - ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); - clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); - - /* Shut them really down and reinit buffer descriptors */ - ucc_slow_graceful_stop_tx(qe_port->us_private); - qe_uart_initbd(qe_port); - - free_irq(port->irq, qe_port); -} - -/* - * Set the serial port parameters. - */ -static void qe_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow __iomem *uccp = qe_port->uccp; - unsigned int baud; - unsigned long flags; - u16 upsmr = in_be16(&uccp->upsmr); - struct ucc_uart_pram __iomem *uccup = qe_port->uccup; - u16 supsmr = in_be16(&uccup->supsmr); - u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - - /* byte size */ - upsmr &= UCC_UART_UPSMR_CL_MASK; - supsmr &= UCC_UART_SUPSMR_CL_MASK; - - switch (termios->c_cflag & CSIZE) { - case CS5: - upsmr |= UCC_UART_UPSMR_CL_5; - supsmr |= UCC_UART_SUPSMR_CL_5; - char_length += 5; - break; - case CS6: - upsmr |= UCC_UART_UPSMR_CL_6; - supsmr |= UCC_UART_SUPSMR_CL_6; - char_length += 6; - break; - case CS7: - upsmr |= UCC_UART_UPSMR_CL_7; - supsmr |= UCC_UART_SUPSMR_CL_7; - char_length += 7; - break; - default: /* case CS8 */ - upsmr |= UCC_UART_UPSMR_CL_8; - supsmr |= UCC_UART_SUPSMR_CL_8; - char_length += 8; - break; - } - - /* If CSTOPB is set, we want two stop bits */ - if (termios->c_cflag & CSTOPB) { - upsmr |= UCC_UART_UPSMR_SL; - supsmr |= UCC_UART_SUPSMR_SL; - char_length++; /* + SL */ - } - - if (termios->c_cflag & PARENB) { - upsmr |= UCC_UART_UPSMR_PEN; - supsmr |= UCC_UART_SUPSMR_PEN; - char_length++; /* + PEN */ - - if (!(termios->c_cflag & PARODD)) { - upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | - UCC_UART_UPSMR_TPM_MASK); - upsmr |= UCC_UART_UPSMR_RPM_EVEN | - UCC_UART_UPSMR_TPM_EVEN; - supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | - UCC_UART_SUPSMR_TPM_MASK); - supsmr |= UCC_UART_SUPSMR_RPM_EVEN | - UCC_UART_SUPSMR_TPM_EVEN; - } - } - - /* - * Set up parity check flag - */ - port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; - if (termios->c_iflag & INPCK) - port->read_status_mask |= BD_SC_FR | BD_SC_PR; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - port->read_status_mask &= ~BD_SC_EMPTY; - - baud = uart_get_baud_rate(port, termios, old, 0, 115200); - - /* Do we really need a spinlock here? */ - spin_lock_irqsave(&port->lock, flags); - - out_be16(&uccp->upsmr, upsmr); - if (soft_uart) { - out_be16(&uccup->supsmr, supsmr); - out_8(&uccup->rx_length, char_length); - - /* Soft-UART requires a 1X multiplier for TX */ - qe_setbrg(qe_port->us_info.rx_clock, baud, 16); - qe_setbrg(qe_port->us_info.tx_clock, baud, 1); - } else { - qe_setbrg(qe_port->us_info.rx_clock, baud, 16); - qe_setbrg(qe_port->us_info.tx_clock, baud, 16); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * Return a pointer to a string that describes what kind of port this is. - */ -static const char *qe_uart_type(struct uart_port *port) -{ - return "QE"; -} - -/* - * Allocate any memory and I/O resources required by the port. - */ -static int qe_uart_request_port(struct uart_port *port) -{ - int ret; - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow_info *us_info = &qe_port->us_info; - struct ucc_slow_private *uccs; - unsigned int rx_size, tx_size; - void *bd_virt; - dma_addr_t bd_dma_addr = 0; - - ret = ucc_slow_init(us_info, &uccs); - if (ret) { - dev_err(port->dev, "could not initialize UCC%u\n", - qe_port->ucc_num); - return ret; - } - - qe_port->us_private = uccs; - qe_port->uccp = uccs->us_regs; - qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; - qe_port->rx_bd_base = uccs->rx_bd; - qe_port->tx_bd_base = uccs->tx_bd; - - /* - * Allocate the transmit and receive data buffers. - */ - - rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); - tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); - - bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr, - GFP_KERNEL); - if (!bd_virt) { - dev_err(port->dev, "could not allocate buffer descriptors\n"); - return -ENOMEM; - } - - qe_port->bd_virt = bd_virt; - qe_port->bd_dma_addr = bd_dma_addr; - qe_port->bd_size = rx_size + tx_size; - - qe_port->rx_buf = bd_virt; - qe_port->tx_buf = qe_port->rx_buf + rx_size; - - return 0; -} - -/* - * Configure the port. - * - * We say we're a CPM-type port because that's mostly true. Once the device - * is configured, this driver operates almost identically to the CPM serial - * driver. - */ -static void qe_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_CPM; - qe_uart_request_port(port); - } -} - -/* - * Release any memory and I/O resources that were allocated in - * qe_uart_request_port(). - */ -static void qe_uart_release_port(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow_private *uccs = qe_port->us_private; - - dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt, - qe_port->bd_dma_addr); - - ucc_slow_free(uccs); -} - -/* - * Verify that the data in serial_struct is suitable for this device. - */ -static int qe_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) - return -EINVAL; - - if (ser->irq < 0 || ser->irq >= nr_irqs) - return -EINVAL; - - if (ser->baud_base < 9600) - return -EINVAL; - - return 0; -} -/* UART operations - * - * Details on these functions can be found in Documentation/serial/driver - */ -static struct uart_ops qe_uart_pops = { - .tx_empty = qe_uart_tx_empty, - .set_mctrl = qe_uart_set_mctrl, - .get_mctrl = qe_uart_get_mctrl, - .stop_tx = qe_uart_stop_tx, - .start_tx = qe_uart_start_tx, - .stop_rx = qe_uart_stop_rx, - .enable_ms = qe_uart_enable_ms, - .break_ctl = qe_uart_break_ctl, - .startup = qe_uart_startup, - .shutdown = qe_uart_shutdown, - .set_termios = qe_uart_set_termios, - .type = qe_uart_type, - .release_port = qe_uart_release_port, - .request_port = qe_uart_request_port, - .config_port = qe_uart_config_port, - .verify_port = qe_uart_verify_port, -}; - -/* - * Obtain the SOC model number and revision level - * - * This function parses the device tree to obtain the SOC model. It then - * reads the SVR register to the revision. - * - * The device tree stores the SOC model two different ways. - * - * The new way is: - * - * cpu@0 { - * compatible = "PowerPC,8323"; - * device_type = "cpu"; - * ... - * - * - * The old way is: - * PowerPC,8323@0 { - * device_type = "cpu"; - * ... - * - * This code first checks the new way, and then the old way. - */ -static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) -{ - struct device_node *np; - const char *soc_string; - unsigned int svr; - unsigned int soc; - - /* Find the CPU node */ - np = of_find_node_by_type(NULL, "cpu"); - if (!np) - return 0; - /* Find the compatible property */ - soc_string = of_get_property(np, "compatible", NULL); - if (!soc_string) - /* No compatible property, so try the name. */ - soc_string = np->name; - - /* Extract the SOC number from the "PowerPC," string */ - if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) - return 0; - - /* Get the revision from the SVR */ - svr = mfspr(SPRN_SVR); - *rev_h = (svr >> 4) & 0xf; - *rev_l = svr & 0xf; - - return soc; -} - -/* - * requst_firmware_nowait() callback function - * - * This function is called by the kernel when a firmware is made available, - * or if it times out waiting for the firmware. - */ -static void uart_firmware_cont(const struct firmware *fw, void *context) -{ - struct qe_firmware *firmware; - struct device *dev = context; - int ret; - - if (!fw) { - dev_err(dev, "firmware not found\n"); - return; - } - - firmware = (struct qe_firmware *) fw->data; - - if (firmware->header.length != fw->size) { - dev_err(dev, "invalid firmware\n"); - goto out; - } - - ret = qe_upload_firmware(firmware); - if (ret) { - dev_err(dev, "could not load firmware\n"); - goto out; - } - - firmware_loaded = 1; - out: - release_firmware(fw); -} - -static int ucc_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - struct device_node *np = ofdev->dev.of_node; - const unsigned int *iprop; /* Integer OF properties */ - const char *sprop; /* String OF properties */ - struct uart_qe_port *qe_port = NULL; - struct resource res; - int ret; - - /* - * Determine if we need Soft-UART mode - */ - if (of_find_property(np, "soft-uart", NULL)) { - dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); - soft_uart = 1; - } - - /* - * If we are using Soft-UART, determine if we need to upload the - * firmware, too. - */ - if (soft_uart) { - struct qe_firmware_info *qe_fw_info; - - qe_fw_info = qe_get_firmware_info(); - - /* Check if the firmware has been uploaded. */ - if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { - firmware_loaded = 1; - } else { - char filename[32]; - unsigned int soc; - unsigned int rev_h; - unsigned int rev_l; - - soc = soc_info(&rev_h, &rev_l); - if (!soc) { - dev_err(&ofdev->dev, "unknown CPU model\n"); - return -ENXIO; - } - sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", - soc, rev_h, rev_l); - - dev_info(&ofdev->dev, "waiting for firmware %s\n", - filename); - - /* - * We call request_firmware_nowait instead of - * request_firmware so that the driver can load and - * initialize the ports without holding up the rest of - * the kernel. If hotplug support is enabled in the - * kernel, then we use it. - */ - ret = request_firmware_nowait(THIS_MODULE, - FW_ACTION_HOTPLUG, filename, &ofdev->dev, - GFP_KERNEL, &ofdev->dev, uart_firmware_cont); - if (ret) { - dev_err(&ofdev->dev, - "could not load firmware %s\n", - filename); - return ret; - } - } - } - - qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); - if (!qe_port) { - dev_err(&ofdev->dev, "can't allocate QE port structure\n"); - return -ENOMEM; - } - - /* Search for IRQ and mapbase */ - ret = of_address_to_resource(np, 0, &res); - if (ret) { - dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); - kfree(qe_port); - return ret; - } - if (!res.start) { - dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - qe_port->port.mapbase = res.start; - - /* Get the UCC number (device ID) */ - /* UCCs are numbered 1-7 */ - iprop = of_get_property(np, "cell-index", NULL); - if (!iprop) { - iprop = of_get_property(np, "device-id", NULL); - if (!iprop) { - kfree(qe_port); - dev_err(&ofdev->dev, "UCC is unspecified in " - "device tree\n"); - return -EINVAL; - } - } - - if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) { - dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop); - kfree(qe_port); - return -ENODEV; - } - qe_port->ucc_num = *iprop - 1; - - /* - * In the future, we should not require the BRG to be specified in the - * device tree. If no clock-source is specified, then just pick a BRG - * to use. This requires a new QE library function that manages BRG - * assignments. - */ - - sprop = of_get_property(np, "rx-clock-name", NULL); - if (!sprop) { - dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); - kfree(qe_port); - return -ENODEV; - } - - qe_port->us_info.rx_clock = qe_clock_source(sprop); - if ((qe_port->us_info.rx_clock < QE_BRG1) || - (qe_port->us_info.rx_clock > QE_BRG16)) { - dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); - kfree(qe_port); - return -ENODEV; - } - -#ifdef LOOPBACK - /* In internal loopback mode, TX and RX must use the same clock */ - qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; -#else - sprop = of_get_property(np, "tx-clock-name", NULL); - if (!sprop) { - dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); - kfree(qe_port); - return -ENODEV; - } - qe_port->us_info.tx_clock = qe_clock_source(sprop); -#endif - if ((qe_port->us_info.tx_clock < QE_BRG1) || - (qe_port->us_info.tx_clock > QE_BRG16)) { - dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); - kfree(qe_port); - return -ENODEV; - } - - /* Get the port number, numbered 0-3 */ - iprop = of_get_property(np, "port-number", NULL); - if (!iprop) { - dev_err(&ofdev->dev, "missing port-number in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - qe_port->port.line = *iprop; - if (qe_port->port.line >= UCC_MAX_UART) { - dev_err(&ofdev->dev, "port-number must be 0-%u\n", - UCC_MAX_UART - 1); - kfree(qe_port); - return -EINVAL; - } - - qe_port->port.irq = irq_of_parse_and_map(np, 0); - if (qe_port->port.irq == NO_IRQ) { - dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", - qe_port->ucc_num + 1); - kfree(qe_port); - return -EINVAL; - } - - /* - * Newer device trees have an "fsl,qe" compatible property for the QE - * node, but we still need to support older device trees. - */ - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_type(NULL, "qe"); - if (!np) { - dev_err(&ofdev->dev, "could not find 'qe' node\n"); - kfree(qe_port); - return -EINVAL; - } - } - - iprop = of_get_property(np, "brg-frequency", NULL); - if (!iprop) { - dev_err(&ofdev->dev, - "missing brg-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - - if (*iprop) - qe_port->port.uartclk = *iprop; - else { - /* - * Older versions of U-Boot do not initialize the brg-frequency - * property, so in this case we assume the BRG frequency is - * half the QE bus frequency. - */ - iprop = of_get_property(np, "bus-frequency", NULL); - if (!iprop) { - dev_err(&ofdev->dev, - "missing QE bus-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - if (*iprop) - qe_port->port.uartclk = *iprop / 2; - else { - dev_err(&ofdev->dev, - "invalid QE bus-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - } - - spin_lock_init(&qe_port->port.lock); - qe_port->np = np; - qe_port->port.dev = &ofdev->dev; - qe_port->port.ops = &qe_uart_pops; - qe_port->port.iotype = UPIO_MEM; - - qe_port->tx_nrfifos = TX_NUM_FIFO; - qe_port->tx_fifosize = TX_BUF_SIZE; - qe_port->rx_nrfifos = RX_NUM_FIFO; - qe_port->rx_fifosize = RX_BUF_SIZE; - - qe_port->wait_closing = UCC_WAIT_CLOSING; - qe_port->port.fifosize = 512; - qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; - - qe_port->us_info.ucc_num = qe_port->ucc_num; - qe_port->us_info.regs = (phys_addr_t) res.start; - qe_port->us_info.irq = qe_port->port.irq; - - qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; - qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; - - /* Make sure ucc_slow_init() initializes both TX and RX */ - qe_port->us_info.init_tx = 1; - qe_port->us_info.init_rx = 1; - - /* Add the port to the uart sub-system. This will cause - * qe_uart_config_port() to be called, so the us_info structure must - * be initialized. - */ - ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); - if (ret) { - dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", - qe_port->port.line); - kfree(qe_port); - return ret; - } - - dev_set_drvdata(&ofdev->dev, qe_port); - - dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", - qe_port->ucc_num + 1, qe_port->port.line); - - /* Display the mknod command for this device */ - dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", - qe_port->port.line, SERIAL_QE_MAJOR, - SERIAL_QE_MINOR + qe_port->port.line); - - return 0; -} - -static int ucc_uart_remove(struct platform_device *ofdev) -{ - struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev); - - dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); - - uart_remove_one_port(&ucc_uart_driver, &qe_port->port); - - dev_set_drvdata(&ofdev->dev, NULL); - kfree(qe_port); - - return 0; -} - -static struct of_device_id ucc_uart_match[] = { - { - .type = "serial", - .compatible = "ucc_uart", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, ucc_uart_match); - -static struct of_platform_driver ucc_uart_of_driver = { - .driver = { - .name = "ucc_uart", - .owner = THIS_MODULE, - .of_match_table = ucc_uart_match, - }, - .probe = ucc_uart_probe, - .remove = ucc_uart_remove, -}; - -static int __init ucc_uart_init(void) -{ - int ret; - - printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); -#ifdef LOOPBACK - printk(KERN_INFO "ucc-uart: Using loopback mode\n"); -#endif - - ret = uart_register_driver(&ucc_uart_driver); - if (ret) { - printk(KERN_ERR "ucc-uart: could not register UART driver\n"); - return ret; - } - - ret = of_register_platform_driver(&ucc_uart_of_driver); - if (ret) - printk(KERN_ERR - "ucc-uart: could not register platform driver\n"); - - return ret; -} - -static void __exit ucc_uart_exit(void) -{ - printk(KERN_INFO - "Freescale QUICC Engine UART device driver unloading\n"); - - of_unregister_platform_driver(&ucc_uart_of_driver); - uart_unregister_driver(&ucc_uart_driver); -} - -module_init(ucc_uart_init); -module_exit(ucc_uart_exit); - -MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); -MODULE_AUTHOR("Timur Tabi "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); - diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c deleted file mode 100644 index 3beb6ab..0000000 --- a/drivers/serial/vr41xx_siu.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * Driver for NEC VR4100 series Serial Interface Unit. - * - * Copyright (C) 2004-2008 Yoichi Yuasa - * - * Based on drivers/serial/8250.c, by Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define SIU_BAUD_BASE 1152000 -#define SIU_MAJOR 204 -#define SIU_MINOR_BASE 82 - -#define RX_MAX_COUNT 256 -#define TX_MAX_COUNT 15 - -#define SIUIRSEL 0x08 - #define TMICMODE 0x20 - #define TMICTX 0x10 - #define IRMSEL 0x0c - #define IRMSEL_HP 0x08 - #define IRMSEL_TEMIC 0x04 - #define IRMSEL_SHARP 0x00 - #define IRUSESEL 0x02 - #define SIRSEL 0x01 - -static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { - [0 ... SIU_PORTS_MAX-1] = { - .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), - .irq = -1, - }, -}; - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE -static uint8_t lsr_break_flag[SIU_PORTS_MAX]; -#endif - -#define siu_read(port, offset) readb((port)->membase + (offset)) -#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) - -void vr41xx_select_siu_interface(siu_interface_t interface) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - if (interface == SIU_INTERFACE_IRDA) - irsel |= SIRSEL; - else - irsel &= ~SIRSEL; - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); - -void vr41xx_use_irda(irda_use_t use) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - if (use == FIR_USE_IRDA) - irsel |= IRUSESEL; - else - irsel &= ~IRUSESEL; - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_use_irda); - -void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - irsel &= ~(IRMSEL | TMICTX | TMICMODE); - switch (module) { - case SHARP_IRDA: - irsel |= IRMSEL_SHARP; - break; - case TEMIC_IRDA: - irsel |= IRMSEL_TEMIC | TMICMODE; - if (speed == IRDA_TX_4MBPS) - irsel |= TMICTX; - break; - case HP_IRDA: - irsel |= IRMSEL_HP; - break; - default: - break; - } - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); - -static inline void siu_clear_fifo(struct uart_port *port) -{ - siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); - siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - siu_write(port, UART_FCR, 0); -} - -static inline unsigned long siu_port_size(struct uart_port *port) -{ - switch (port->type) { - case PORT_VR41XX_SIU: - return 11UL; - case PORT_VR41XX_DSIU: - return 8UL; - } - - return 0; -} - -static inline unsigned int siu_check_type(struct uart_port *port) -{ - if (port->line == 0) - return PORT_VR41XX_SIU; - if (port->line == 1 && port->irq != -1) - return PORT_VR41XX_DSIU; - - return PORT_UNKNOWN; -} - -static inline const char *siu_type_name(struct uart_port *port) -{ - switch (port->type) { - case PORT_VR41XX_SIU: - return "SIU"; - case PORT_VR41XX_DSIU: - return "DSIU"; - } - - return NULL; -} - -static unsigned int siu_tx_empty(struct uart_port *port) -{ - uint8_t lsr; - - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_TEMT) - return TIOCSER_TEMT; - - return 0; -} - -static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - uint8_t mcr = 0; - - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - siu_write(port, UART_MCR, mcr); -} - -static unsigned int siu_get_mctrl(struct uart_port *port) -{ - uint8_t msr; - unsigned int mctrl = 0; - - msr = siu_read(port, UART_MSR); - if (msr & UART_MSR_DCD) - mctrl |= TIOCM_CAR; - if (msr & UART_MSR_RI) - mctrl |= TIOCM_RNG; - if (msr & UART_MSR_DSR) - mctrl |= TIOCM_DSR; - if (msr & UART_MSR_CTS) - mctrl |= TIOCM_CTS; - - return mctrl; -} - -static void siu_stop_tx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_THRI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_start_tx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier |= UART_IER_THRI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_stop_rx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_RLSI; - siu_write(port, UART_IER, ier); - - port->read_status_mask &= ~UART_LSR_DR; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_enable_ms(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier |= UART_IER_MSI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - uint8_t lcr; - - spin_lock_irqsave(&port->lock, flags); - - lcr = siu_read(port, UART_LCR); - if (ctl == -1) - lcr |= UART_LCR_SBC; - else - lcr &= ~UART_LCR_SBC; - siu_write(port, UART_LCR, lcr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static inline void receive_chars(struct uart_port *port, uint8_t *status) -{ - struct tty_struct *tty; - uint8_t lsr, ch; - char flag; - int max_count = RX_MAX_COUNT; - - tty = port->state->port.tty; - lsr = *status; - - do { - ch = siu_read(port, UART_RX); - port->icount.rx++; - flag = TTY_NORMAL; - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE - lsr |= lsr_break_flag[port->line]; - lsr_break_flag[port->line] = 0; -#endif - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | - UART_LSR_PE | UART_LSR_OE))) { - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - port->icount.brk++; - - if (uart_handle_break(port)) - goto ignore_char; - } - - if (lsr & UART_LSR_FE) - port->icount.frame++; - if (lsr & UART_LSR_PE) - port->icount.parity++; - if (lsr & UART_LSR_OE) - port->icount.overrun++; - - lsr &= port->read_status_mask; - if (lsr & UART_LSR_BI) - flag = TTY_BREAK; - if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); - - ignore_char: - lsr = siu_read(port, UART_LSR); - } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); - - tty_flip_buffer_push(tty); - - *status = lsr; -} - -static inline void check_modem_status(struct uart_port *port) -{ - uint8_t msr; - - msr = siu_read(port, UART_MSR); - if ((msr & UART_MSR_ANY_DELTA) == 0) - return; - if (msr & UART_MSR_DDCD) - uart_handle_dcd_change(port, msr & UART_MSR_DCD); - if (msr & UART_MSR_TERI) - port->icount.rng++; - if (msr & UART_MSR_DDSR) - port->icount.dsr++; - if (msr & UART_MSR_DCTS) - uart_handle_cts_change(port, msr & UART_MSR_CTS); - - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static inline void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - int max_count = TX_MAX_COUNT; - - xmit = &port->state->xmit; - - if (port->x_char) { - siu_write(port, UART_TX, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - siu_stop_tx(port); - return; - } - - do { - siu_write(port, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (max_count-- > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - siu_stop_tx(port); -} - -static irqreturn_t siu_interrupt(int irq, void *dev_id) -{ - struct uart_port *port; - uint8_t iir, lsr; - - port = (struct uart_port *)dev_id; - - iir = siu_read(port, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(port, &lsr); - - check_modem_status(port); - - if (lsr & UART_LSR_THRE) - transmit_chars(port); - - return IRQ_HANDLED; -} - -static int siu_startup(struct uart_port *port) -{ - int retval; - - if (port->membase == NULL) - return -ENODEV; - - siu_clear_fifo(port); - - (void)siu_read(port, UART_LSR); - (void)siu_read(port, UART_RX); - (void)siu_read(port, UART_IIR); - (void)siu_read(port, UART_MSR); - - if (siu_read(port, UART_LSR) == 0xff) - return -ENODEV; - - retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); - if (retval) - return retval; - - if (port->type == PORT_VR41XX_DSIU) - vr41xx_enable_dsiuint(DSIUINT_ALL); - - siu_write(port, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irq(&port->lock); - siu_set_mctrl(port, port->mctrl); - spin_unlock_irq(&port->lock); - - siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); - - (void)siu_read(port, UART_LSR); - (void)siu_read(port, UART_RX); - (void)siu_read(port, UART_IIR); - (void)siu_read(port, UART_MSR); - - return 0; -} - -static void siu_shutdown(struct uart_port *port) -{ - unsigned long flags; - uint8_t lcr; - - siu_write(port, UART_IER, 0); - - spin_lock_irqsave(&port->lock, flags); - - port->mctrl &= ~TIOCM_OUT2; - siu_set_mctrl(port, port->mctrl); - - spin_unlock_irqrestore(&port->lock, flags); - - lcr = siu_read(port, UART_LCR); - lcr &= ~UART_LCR_SBC; - siu_write(port, UART_LCR, lcr); - - siu_clear_fifo(port); - - (void)siu_read(port, UART_RX); - - if (port->type == PORT_VR41XX_DSIU) - vr41xx_disable_dsiuint(DSIUINT_ALL); - - free_irq(port->irq, port); -} - -static void siu_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) -{ - tcflag_t c_cflag, c_iflag; - uint8_t lcr, fcr, ier; - unsigned int baud, quot; - unsigned long flags; - - c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } - - if (c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - if (c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - if ((c_cflag & PARODD) != PARODD) - lcr |= UART_LCR_EPAR; - if (c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; - - spin_lock_irqsave(&port->lock, flags); - - uart_update_timeout(port, c_cflag, baud); - - c_iflag = new->c_iflag; - - port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; - if (c_iflag & INPCK) - port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART_LSR_BI; - - port->ignore_status_mask = 0; - if (c_iflag & IGNPAR) - port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (c_iflag & IGNBRK) { - port->ignore_status_mask |= UART_LSR_BI; - if (c_iflag & IGNPAR) - port->ignore_status_mask |= UART_LSR_OE; - } - - if ((c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_LSR_DR; - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(port, c_cflag)) - ier |= UART_IER_MSI; - siu_write(port, UART_IER, ier); - - siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); - - siu_write(port, UART_DLL, (uint8_t)quot); - siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); - - siu_write(port, UART_LCR, lcr); - - siu_write(port, UART_FCR, fcr); - - siu_set_mctrl(port, port->mctrl); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) -{ - switch (state) { - case 0: - switch (port->type) { - case PORT_VR41XX_SIU: - vr41xx_supply_clock(SIU_CLOCK); - break; - case PORT_VR41XX_DSIU: - vr41xx_supply_clock(DSIU_CLOCK); - break; - } - break; - case 3: - switch (port->type) { - case PORT_VR41XX_SIU: - vr41xx_mask_clock(SIU_CLOCK); - break; - case PORT_VR41XX_DSIU: - vr41xx_mask_clock(DSIU_CLOCK); - break; - } - break; - } -} - -static const char *siu_type(struct uart_port *port) -{ - return siu_type_name(port); -} - -static void siu_release_port(struct uart_port *port) -{ - unsigned long size; - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - size = siu_port_size(port); - release_mem_region(port->mapbase, size); -} - -static int siu_request_port(struct uart_port *port) -{ - unsigned long size; - struct resource *res; - - size = siu_port_size(port); - res = request_mem_region(port->mapbase, size, siu_type_name(port)); - if (res == NULL) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_resource(res); - return -ENOMEM; - } - } - - return 0; -} - -static void siu_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = siu_check_type(port); - (void)siu_request_port(port); - } -} - -static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) -{ - if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) - return -EINVAL; - if (port->irq != serial->irq) - return -EINVAL; - if (port->iotype != serial->io_type) - return -EINVAL; - if (port->mapbase != (unsigned long)serial->iomem_base) - return -EINVAL; - - return 0; -} - -static struct uart_ops siu_uart_ops = { - .tx_empty = siu_tx_empty, - .set_mctrl = siu_set_mctrl, - .get_mctrl = siu_get_mctrl, - .stop_tx = siu_stop_tx, - .start_tx = siu_start_tx, - .stop_rx = siu_stop_rx, - .enable_ms = siu_enable_ms, - .break_ctl = siu_break_ctl, - .startup = siu_startup, - .shutdown = siu_shutdown, - .set_termios = siu_set_termios, - .pm = siu_pm, - .type = siu_type, - .release_port = siu_release_port, - .request_port = siu_request_port, - .config_port = siu_config_port, - .verify_port = siu_verify_port, -}; - -static int siu_init_ports(struct platform_device *pdev) -{ - struct uart_port *port; - struct resource *res; - int *type = pdev->dev.platform_data; - int i; - - if (!type) - return 0; - - port = siu_uart_ports; - for (i = 0; i < SIU_PORTS_MAX; i++) { - port->type = type[i]; - if (port->type == PORT_UNKNOWN) - continue; - port->irq = platform_get_irq(pdev, i); - port->uartclk = SIU_BAUD_BASE * 16; - port->fifosize = 16; - port->regshift = 0; - port->iotype = UPIO_MEM; - port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - port->line = i; - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - port->mapbase = res->start; - port++; - } - - return i; -} - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void wait_for_xmitr(struct uart_port *port) -{ - int timeout = 10000; - uint8_t lsr, msr; - - do { - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_BI) - lsr_break_flag[port->line] = UART_LSR_BI; - - if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) - break; - } while (timeout-- > 0); - - if (port->flags & UPF_CONS_FLOW) { - timeout = 1000000; - - do { - msr = siu_read(port, UART_MSR); - if ((msr & UART_MSR_CTS) != 0) - break; - } while (timeout-- > 0); - } -} - -static void siu_console_putchar(struct uart_port *port, int ch) -{ - wait_for_xmitr(port); - siu_write(port, UART_TX, ch); -} - -static void siu_console_write(struct console *con, const char *s, unsigned count) -{ - struct uart_port *port; - uint8_t ier; - - port = &siu_uart_ports[con->index]; - - ier = siu_read(port, UART_IER); - siu_write(port, UART_IER, 0); - - uart_console_write(port, s, count, siu_console_putchar); - - wait_for_xmitr(port); - siu_write(port, UART_IER, ier); -} - -static int __init siu_console_setup(struct console *con, char *options) -{ - struct uart_port *port; - int baud = 9600; - int parity = 'n'; - int bits = 8; - int flow = 'n'; - - if (con->index >= SIU_PORTS_MAX) - con->index = 0; - - port = &siu_uart_ports[con->index]; - if (port->membase == NULL) { - if (port->mapbase == 0) - return -ENODEV; - port->membase = ioremap(port->mapbase, siu_port_size(port)); - } - - if (port->type == PORT_VR41XX_SIU) - vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); - - if (options != NULL) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, con, baud, parity, bits, flow); -} - -static struct uart_driver siu_uart_driver; - -static struct console siu_console = { - .name = "ttyVR", - .write = siu_console_write, - .device = uart_console_device, - .setup = siu_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &siu_uart_driver, -}; - -static int __devinit siu_console_init(void) -{ - struct uart_port *port; - int i; - - for (i = 0; i < SIU_PORTS_MAX; i++) { - port = &siu_uart_ports[i]; - port->ops = &siu_uart_ops; - } - - register_console(&siu_console); - - return 0; -} - -console_initcall(siu_console_init); - -void __init vr41xx_siu_early_setup(struct uart_port *port) -{ - if (port->type == PORT_UNKNOWN) - return; - - siu_uart_ports[port->line].line = port->line; - siu_uart_ports[port->line].type = port->type; - siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; - siu_uart_ports[port->line].mapbase = port->mapbase; - siu_uart_ports[port->line].mapbase = port->mapbase; - siu_uart_ports[port->line].ops = &siu_uart_ops; -} - -#define SERIAL_VR41XX_CONSOLE &siu_console -#else -#define SERIAL_VR41XX_CONSOLE NULL -#endif - -static struct uart_driver siu_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "SIU", - .dev_name = "ttyVR", - .major = SIU_MAJOR, - .minor = SIU_MINOR_BASE, - .cons = SERIAL_VR41XX_CONSOLE, -}; - -static int __devinit siu_probe(struct platform_device *dev) -{ - struct uart_port *port; - int num, i, retval; - - num = siu_init_ports(dev); - if (num <= 0) - return -ENODEV; - - siu_uart_driver.nr = num; - retval = uart_register_driver(&siu_uart_driver); - if (retval) - return retval; - - for (i = 0; i < num; i++) { - port = &siu_uart_ports[i]; - port->ops = &siu_uart_ops; - port->dev = &dev->dev; - - retval = uart_add_one_port(&siu_uart_driver, port); - if (retval < 0) { - port->dev = NULL; - break; - } - } - - if (i == 0 && retval < 0) { - uart_unregister_driver(&siu_uart_driver); - return retval; - } - - return 0; -} - -static int __devexit siu_remove(struct platform_device *dev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if (port->dev == &dev->dev) { - uart_remove_one_port(&siu_uart_driver, port); - port->dev = NULL; - } - } - - uart_unregister_driver(&siu_uart_driver); - - return 0; -} - -static int siu_suspend(struct platform_device *dev, pm_message_t state) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if ((port->type == PORT_VR41XX_SIU || - port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) - uart_suspend_port(&siu_uart_driver, port); - - } - - return 0; -} - -static int siu_resume(struct platform_device *dev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if ((port->type == PORT_VR41XX_SIU || - port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) - uart_resume_port(&siu_uart_driver, port); - } - - return 0; -} - -static struct platform_driver siu_device_driver = { - .probe = siu_probe, - .remove = __devexit_p(siu_remove), - .suspend = siu_suspend, - .resume = siu_resume, - .driver = { - .name = "SIU", - .owner = THIS_MODULE, - }, -}; - -static int __init vr41xx_siu_init(void) -{ - return platform_driver_register(&siu_device_driver); -} - -static void __exit vr41xx_siu_exit(void) -{ - platform_driver_unregister(&siu_device_driver); -} - -module_init(vr41xx_siu_init); -module_exit(vr41xx_siu_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:SIU"); diff --git a/drivers/serial/vt8500_serial.c b/drivers/serial/vt8500_serial.c deleted file mode 100644 index 322bf56..0000000 --- a/drivers/serial/vt8500_serial.c +++ /dev/null @@ -1,648 +0,0 @@ -/* - * drivers/serial/vt8500_serial.c - * - * Copyright (C) 2010 Alexey Charkov - * - * Based on msm_serial.c, which is: - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -# define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * UART Register offsets - */ - -#define VT8500_URTDR 0x0000 /* Transmit data */ -#define VT8500_URRDR 0x0004 /* Receive data */ -#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ -#define VT8500_URLCR 0x000C /* Line control */ -#define VT8500_URICR 0x0010 /* IrDA control */ -#define VT8500_URIER 0x0014 /* Interrupt enable */ -#define VT8500_URISR 0x0018 /* Interrupt status */ -#define VT8500_URUSR 0x001c /* UART status */ -#define VT8500_URFCR 0x0020 /* FIFO control */ -#define VT8500_URFIDX 0x0024 /* FIFO index */ -#define VT8500_URBKR 0x0028 /* Break signal count */ -#define VT8500_URTOD 0x002c /* Time out divisor */ -#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ -#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ - -/* - * Interrupt enable and status bits - */ - -#define TXDE (1 << 0) /* Tx Data empty */ -#define RXDF (1 << 1) /* Rx Data full */ -#define TXFAE (1 << 2) /* Tx FIFO almost empty */ -#define TXFE (1 << 3) /* Tx FIFO empty */ -#define RXFAF (1 << 4) /* Rx FIFO almost full */ -#define RXFF (1 << 5) /* Rx FIFO full */ -#define TXUDR (1 << 6) /* Tx underrun */ -#define RXOVER (1 << 7) /* Rx overrun */ -#define PER (1 << 8) /* Parity error */ -#define FER (1 << 9) /* Frame error */ -#define TCTS (1 << 10) /* Toggle of CTS */ -#define RXTOUT (1 << 11) /* Rx timeout */ -#define BKDONE (1 << 12) /* Break signal done */ -#define ERR (1 << 13) /* AHB error response */ - -#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) -#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) - -struct vt8500_port { - struct uart_port uart; - char name[16]; - struct clk *clk; - unsigned int ier; -}; - -static inline void vt8500_write(struct uart_port *port, unsigned int val, - unsigned int off) -{ - writel(val, port->membase + off); -} - -static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) -{ - return readl(port->membase + off); -} - -static void vt8500_stop_tx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void vt8500_stop_rx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~RX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void vt8500_enable_ms(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier |= TCTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void handle_rx(struct uart_port *port) -{ - struct tty_struct *tty = tty_port_tty_get(&port->state->port); - if (!tty) { - /* Discard data: no tty available */ - int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8; - u16 ch; - while (count--) - ch = readw(port->membase + VT8500_RXFIFO); - return; - } - - /* - * Handle overrun - */ - if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - /* and now the main RX loop */ - while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { - unsigned int c; - char flag = TTY_NORMAL; - - c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; - - /* Mask conditions we're ignorning. */ - c &= ~port->read_status_mask; - - if (c & FER) { - port->icount.frame++; - flag = TTY_FRAME; - } else if (c & PER) { - port->icount.parity++; - flag = TTY_PARITY; - } - port->icount.rx++; - - if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); - } - - tty_flip_buffer_push(tty); - tty_kref_put(tty); -} - -static void handle_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - writeb(port->x_char, port->membase + VT8500_TXFIFO); - port->icount.tx++; - port->x_char = 0; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - vt8500_stop_tx(port); - return; - } - - while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { - if (uart_circ_empty(xmit)) - break; - - writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - vt8500_stop_tx(port); -} - -static void vt8500_start_tx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); - handle_tx(port); - vt8500_port->ier |= TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void handle_delta_cts(struct uart_port *port) -{ - port->icount.cts++; - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static irqreturn_t vt8500_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long isr; - - spin_lock(&port->lock); - isr = vt8500_read(port, VT8500_URISR); - - /* Acknowledge active status bits */ - vt8500_write(port, isr, VT8500_URISR); - - if (isr & RX_FIFO_INTS) - handle_rx(port); - if (isr & TX_FIFO_INTS) - handle_tx(port); - if (isr & TCTS) - handle_delta_cts(port); - - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int vt8500_tx_empty(struct uart_port *port) -{ - return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? - TIOCSER_TEMT : 0; -} - -static unsigned int vt8500_get_mctrl(struct uart_port *port) -{ - unsigned int usr; - - usr = vt8500_read(port, VT8500_URUSR); - if (usr & (1 << 4)) - return TIOCM_CTS; - else - return 0; -} - -static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void vt8500_break_ctl(struct uart_port *port, int break_ctl) -{ - if (break_ctl) - vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9), - VT8500_URLCR); -} - -static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) -{ - unsigned long div; - unsigned int loops = 1000; - - div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff); - - if (unlikely((baud < 900) || (baud > 921600))) - div |= 7; - else - div |= (921600 / baud) - 1; - - while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) - cpu_relax(); - vt8500_write(port, div, VT8500_URDIV); - - return baud; -} - -static int vt8500_startup(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - int ret; - - snprintf(vt8500_port->name, sizeof(vt8500_port->name), - "vt8500_serial%d", port->line); - - ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, - vt8500_port->name, port); - if (unlikely(ret)) - return ret; - - vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ - - return 0; -} - -static void vt8500_shutdown(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - - vt8500_port->ier = 0; - - /* disable interrupts and FIFOs */ - vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); - vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); - free_irq(port->irq, port); -} - -static void vt8500_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - unsigned long flags; - unsigned int baud, lcr; - unsigned int loops = 1000; - - spin_lock_irqsave(&port->lock, flags); - - /* calculate and set baud rate */ - baud = uart_get_baud_rate(port, termios, old, 900, 921600); - baud = vt8500_set_baud_rate(port, baud); - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - - /* calculate parity */ - lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); - lcr &= ~((1 << 5) | (1 << 4)); - if (termios->c_cflag & PARENB) { - lcr |= (1 << 4); - termios->c_cflag &= ~CMSPAR; - if (termios->c_cflag & PARODD) - lcr |= (1 << 5); - } - - /* calculate bits per char */ - lcr &= ~(1 << 2); - switch (termios->c_cflag & CSIZE) { - case CS7: - break; - case CS8: - default: - lcr |= (1 << 2); - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= CS8; - break; - } - - /* calculate stop bits */ - lcr &= ~(1 << 3); - if (termios->c_cflag & CSTOPB) - lcr |= (1 << 3); - - /* set parity, bits per char, and stop bit */ - vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); - - /* Configure status bits to ignore based on termio flags. */ - port->read_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->read_status_mask = FER | PER; - - uart_update_timeout(port, termios->c_cflag, baud); - - /* Reset FIFOs */ - vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); - while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) - && --loops) - cpu_relax(); - - /* Every possible FIFO-related interrupt */ - vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; - - /* - * CTS flow control - */ - if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) - vt8500_port->ier |= TCTS; - - vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); - vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *vt8500_type(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - return vt8500_port->name; -} - -static void vt8500_release_port(struct uart_port *port) -{ -} - -static int vt8500_request_port(struct uart_port *port) -{ - return 0; -} - -static void vt8500_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_VT8500; -} - -static int vt8500_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) - return -EINVAL; - if (unlikely(port->irq != ser->irq)) - return -EINVAL; - return 0; -} - -static struct vt8500_port *vt8500_uart_ports[4]; -static struct uart_driver vt8500_uart_driver; - -#ifdef CONFIG_SERIAL_VT8500_CONSOLE - -static inline void wait_for_xmitr(struct uart_port *port) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = vt8500_read(port, VT8500_URFIDX); - - if (--tmout == 0) - break; - udelay(1); - } while (status & 0x10); -} - -static void vt8500_console_putchar(struct uart_port *port, int c) -{ - wait_for_xmitr(port); - writeb(c, port->membase + VT8500_TXFIFO); -} - -static void vt8500_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; - unsigned long ier; - - BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); - - ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); - vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); - - uart_console_write(&vt8500_port->uart, s, count, - vt8500_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and switch back to FIFO - */ - wait_for_xmitr(&vt8500_port->uart); - vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); -} - -static int __init vt8500_console_setup(struct console *co, char *options) -{ - struct vt8500_port *vt8500_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) - return -ENXIO; - - vt8500_port = vt8500_uart_ports[co->index]; - - if (!vt8500_port) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&vt8500_port->uart, - co, baud, parity, bits, flow); -} - -static struct console vt8500_console = { - .name = "ttyWMT", - .write = vt8500_console_write, - .device = uart_console_device, - .setup = vt8500_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &vt8500_uart_driver, -}; - -#define VT8500_CONSOLE (&vt8500_console) - -#else -#define VT8500_CONSOLE NULL -#endif - -static struct uart_ops vt8500_uart_pops = { - .tx_empty = vt8500_tx_empty, - .set_mctrl = vt8500_set_mctrl, - .get_mctrl = vt8500_get_mctrl, - .stop_tx = vt8500_stop_tx, - .start_tx = vt8500_start_tx, - .stop_rx = vt8500_stop_rx, - .enable_ms = vt8500_enable_ms, - .break_ctl = vt8500_break_ctl, - .startup = vt8500_startup, - .shutdown = vt8500_shutdown, - .set_termios = vt8500_set_termios, - .type = vt8500_type, - .release_port = vt8500_release_port, - .request_port = vt8500_request_port, - .config_port = vt8500_config_port, - .verify_port = vt8500_verify_port, -}; - -static struct uart_driver vt8500_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "vt8500_serial", - .dev_name = "ttyWMT", - .nr = 6, - .cons = VT8500_CONSOLE, -}; - -static int __init vt8500_serial_probe(struct platform_device *pdev) -{ - struct vt8500_port *vt8500_port; - struct resource *mmres, *irqres; - int ret; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) - return -ENODEV; - - vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); - if (!vt8500_port) - return -ENOMEM; - - vt8500_port->uart.type = PORT_VT8500; - vt8500_port->uart.iotype = UPIO_MEM; - vt8500_port->uart.mapbase = mmres->start; - vt8500_port->uart.irq = irqres->start; - vt8500_port->uart.fifosize = 16; - vt8500_port->uart.ops = &vt8500_uart_pops; - vt8500_port->uart.line = pdev->id; - vt8500_port->uart.dev = &pdev->dev; - vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - vt8500_port->uart.uartclk = 24000000; - - snprintf(vt8500_port->name, sizeof(vt8500_port->name), - "VT8500 UART%d", pdev->id); - - vt8500_port->uart.membase = ioremap(mmres->start, - mmres->end - mmres->start + 1); - if (!vt8500_port->uart.membase) { - ret = -ENOMEM; - goto err; - } - - vt8500_uart_ports[pdev->id] = vt8500_port; - - uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); - - platform_set_drvdata(pdev, vt8500_port); - - return 0; - -err: - kfree(vt8500_port); - return ret; -} - -static int __devexit vt8500_serial_remove(struct platform_device *pdev) -{ - struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); - kfree(vt8500_port); - - return 0; -} - -static struct platform_driver vt8500_platform_driver = { - .probe = vt8500_serial_probe, - .remove = vt8500_serial_remove, - .driver = { - .name = "vt8500_serial", - .owner = THIS_MODULE, - }, -}; - -static int __init vt8500_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&vt8500_uart_driver); - if (unlikely(ret)) - return ret; - - ret = platform_driver_register(&vt8500_platform_driver); - - if (unlikely(ret)) - uart_unregister_driver(&vt8500_uart_driver); - - return ret; -} - -static void __exit vt8500_serial_exit(void) -{ -#ifdef CONFIG_SERIAL_VT8500_CONSOLE - unregister_console(&vt8500_console); -#endif - platform_driver_unregister(&vt8500_platform_driver); - uart_unregister_driver(&vt8500_uart_driver); -} - -module_init(vt8500_serial_init); -module_exit(vt8500_serial_exit); - -MODULE_AUTHOR("Alexey Charkov "); -MODULE_DESCRIPTION("Driver for vt8500 serial device"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c deleted file mode 100644 index 1a7fd3e..0000000 --- a/drivers/serial/zs.c +++ /dev/null @@ -1,1304 +0,0 @@ -/* - * zs.c: Serial port driver for IOASIC DECstations. - * - * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. - * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. - * - * DECstation changes - * Copyright (C) 1998-2000 Harald Koerfgen - * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki - * - * For the rest of the code the original Copyright applies: - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * - * Note: for IOASIC systems the wiring is as follows: - * - * mouse/keyboard: - * DIN-7 MJ-4 signal SCC - * 2 1 TxD <- A.TxD - * 3 4 RxD -> A.RxD - * - * EIA-232/EIA-423: - * DB-25 MMJ-6 signal SCC - * 2 2 TxD <- B.TxD - * 3 5 RxD -> B.RxD - * 4 RTS <- ~A.RTS - * 5 CTS -> ~B.CTS - * 6 6 DSR -> ~A.SYNC - * 8 CD -> ~B.DCD - * 12 DSRS(DCE) -> ~A.CTS (*) - * 15 TxC -> B.TxC - * 17 RxC -> B.RxC - * 20 1 DTR <- ~A.DTR - * 22 RI -> ~A.DCD - * 23 DSRS(DTE) <- ~B.RTS - * - * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) - * is shared with DSRS(DTE) at pin 23. - * - * As you can immediately notice the wiring of the RTS, DTR and DSR signals - * is a bit odd. This makes the handling of port B unnecessarily - * complicated and prevents the use of some automatic modes of operation. - */ - -#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include "zs.h" - - -MODULE_AUTHOR("Maciej W. Rozycki "); -MODULE_DESCRIPTION("DECstation Z85C30 serial driver"); -MODULE_LICENSE("GPL"); - - -static char zs_name[] __initdata = "DECstation Z85C30 serial driver version "; -static char zs_version[] __initdata = "0.10"; - -/* - * It would be nice to dynamically allocate everything that - * depends on ZS_NUM_SCCS, so we could support any number of - * Z85C30s, but for now... - */ -#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */ -#define ZS_NUM_CHAN 2 /* 2 channels per chip. */ -#define ZS_CHAN_A 0 /* Index of the channel A. */ -#define ZS_CHAN_B 1 /* Index of the channel B. */ -#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */ -#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */ -#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte - of the 16-bit IOBUS. */ -#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */ - -#define to_zport(uport) container_of(uport, struct zs_port, port) - -struct zs_parms { - resource_size_t scc[ZS_NUM_SCCS]; - int irq[ZS_NUM_SCCS]; -}; - -static struct zs_scc zs_sccs[ZS_NUM_SCCS]; - -static u8 zs_init_regs[ZS_NUM_REGS] __initdata = { - 0, /* write 0 */ - PAR_SPEC, /* write 1 */ - 0, /* write 2 */ - 0, /* write 3 */ - X16CLK | SB1, /* write 4 */ - 0, /* write 5 */ - 0, 0, 0, /* write 6, 7, 8 */ - MIE | DLC | NV, /* write 9 */ - NRZ, /* write 10 */ - TCBR | RCBR, /* write 11 */ - 0, 0, /* BRG time constant, write 12 + 13 */ - BRSRC | BRENABL, /* write 14 */ - 0, /* write 15 */ -}; - -/* - * Debugging. - */ -#undef ZS_DEBUG_REGS - - -/* - * Reading and writing Z85C30 registers. - */ -static void recovery_delay(void) -{ - udelay(2); -} - -static u8 read_zsreg(struct zs_port *zport, int reg) -{ - void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; - u8 retval; - - if (reg != 0) { - writeb(reg & 0xf, control); - fast_iob(); - recovery_delay(); - } - retval = readb(control); - recovery_delay(); - return retval; -} - -static void write_zsreg(struct zs_port *zport, int reg, u8 value) -{ - void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; - - if (reg != 0) { - writeb(reg & 0xf, control); - fast_iob(); recovery_delay(); - } - writeb(value, control); - fast_iob(); - recovery_delay(); - return; -} - -static u8 read_zsdata(struct zs_port *zport) -{ - void __iomem *data = zport->port.membase + - ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; - u8 retval; - - retval = readb(data); - recovery_delay(); - return retval; -} - -static void write_zsdata(struct zs_port *zport, u8 value) -{ - void __iomem *data = zport->port.membase + - ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; - - writeb(value, data); - fast_iob(); - recovery_delay(); - return; -} - -#ifdef ZS_DEBUG_REGS -void zs_dump(void) -{ - struct zs_port *zport; - int i, j; - - for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { - zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN]; - - if (!zport->scc) - continue; - - for (j = 0; j < 16; j++) - printk("W%-2d = 0x%02x\t", j, zport->regs[j]); - printk("\n"); - for (j = 0; j < 16; j++) - printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); - printk("\n\n"); - } -} -#endif - - -static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq) -{ - if (irq) - spin_lock_irq(lock); - else - spin_lock(lock); -} - -static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq) -{ - if (irq) - spin_unlock_irq(lock); - else - spin_unlock(lock); -} - -static int zs_receive_drain(struct zs_port *zport) -{ - int loops = 10000; - - while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops) - read_zsdata(zport); - return loops; -} - -static int zs_transmit_drain(struct zs_port *zport, int irq) -{ - struct zs_scc *scc = zport->scc; - int loops = 10000; - - while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) { - zs_spin_unlock_cond_irq(&scc->zlock, irq); - udelay(2); - zs_spin_lock_cond_irq(&scc->zlock, irq); - } - return loops; -} - -static int zs_line_drain(struct zs_port *zport, int irq) -{ - struct zs_scc *scc = zport->scc; - int loops = 10000; - - while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) { - zs_spin_unlock_cond_irq(&scc->zlock, irq); - udelay(2); - zs_spin_lock_cond_irq(&scc->zlock, irq); - } - return loops; -} - - -static void load_zsregs(struct zs_port *zport, u8 *regs, int irq) -{ - /* Let the current transmission finish. */ - zs_line_drain(zport, irq); - /* Load 'em up. */ - write_zsreg(zport, R3, regs[3] & ~RxENABLE); - write_zsreg(zport, R5, regs[5] & ~TxENAB); - write_zsreg(zport, R4, regs[4]); - write_zsreg(zport, R9, regs[9]); - write_zsreg(zport, R1, regs[1]); - write_zsreg(zport, R2, regs[2]); - write_zsreg(zport, R10, regs[10]); - write_zsreg(zport, R14, regs[14] & ~BRENABL); - write_zsreg(zport, R11, regs[11]); - write_zsreg(zport, R12, regs[12]); - write_zsreg(zport, R13, regs[13]); - write_zsreg(zport, R14, regs[14]); - write_zsreg(zport, R15, regs[15]); - if (regs[3] & RxENABLE) - write_zsreg(zport, R3, regs[3]); - if (regs[5] & TxENAB) - write_zsreg(zport, R5, regs[5]); - return; -} - - -/* - * Status handling routines. - */ - -/* - * zs_tx_empty() -- get the transmitter empty status - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static unsigned int zs_tx_empty(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - u8 status; - - spin_lock_irqsave(&scc->zlock, flags); - status = read_zsreg(zport, R1); - spin_unlock_irqrestore(&scc->zlock, flags); - - return status & ALL_SNT ? TIOCSER_TEMT : 0; -} - -static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a, - struct zs_port *zport_b) -{ - u8 status_a, status_b; - unsigned int mctrl; - - status_a = read_zsreg(zport_a, R0); - status_b = read_zsreg(zport_b, R0); - - mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) | - ((status_b & DCD) ? TIOCM_CAR : 0) | - ((status_a & DCD) ? TIOCM_RNG : 0) | - ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0); - - return mctrl; -} - -static unsigned int zs_raw_get_mctrl(struct zs_port *zport) -{ - struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; - - return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0; -} - -static unsigned int zs_raw_xor_mctrl(struct zs_port *zport) -{ - struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; - unsigned int mmask, mctrl, delta; - u8 mask_a, mask_b; - - if (zport == zport_a) - return 0; - - mask_a = zport_a->regs[15]; - mask_b = zport->regs[15]; - - mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) | - ((mask_b & DCDIE) ? TIOCM_CAR : 0) | - ((mask_a & DCDIE) ? TIOCM_RNG : 0) | - ((mask_a & SYNCIE) ? TIOCM_DSR : 0); - - mctrl = zport->mctrl; - if (mmask) { - mctrl &= ~mmask; - mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask; - } - - delta = mctrl ^ zport->mctrl; - if (delta) - zport->mctrl = mctrl; - - return delta; -} - -static unsigned int zs_get_mctrl(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned int mctrl; - - spin_lock(&scc->zlock); - mctrl = zs_raw_get_mctrl(zport); - spin_unlock(&scc->zlock); - - return mctrl; -} - -static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - u8 oldloop, newloop; - - spin_lock(&scc->zlock); - if (zport != zport_a) { - if (mctrl & TIOCM_DTR) - zport_a->regs[5] |= DTR; - else - zport_a->regs[5] &= ~DTR; - if (mctrl & TIOCM_RTS) - zport_a->regs[5] |= RTS; - else - zport_a->regs[5] &= ~RTS; - write_zsreg(zport_a, R5, zport_a->regs[5]); - } - - /* Rarely modified, so don't poke at hardware unless necessary. */ - oldloop = zport->regs[14]; - newloop = oldloop; - if (mctrl & TIOCM_LOOP) - newloop |= LOOPBAK; - else - newloop &= ~LOOPBAK; - if (newloop != oldloop) { - zport->regs[14] = newloop; - write_zsreg(zport, R14, zport->regs[14]); - } - spin_unlock(&scc->zlock); -} - -static void zs_raw_stop_tx(struct zs_port *zport) -{ - write_zsreg(zport, R0, RES_Tx_P); - zport->tx_stopped = 1; -} - -static void zs_stop_tx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - zs_raw_stop_tx(zport); - spin_unlock(&scc->zlock); -} - -static void zs_raw_transmit_chars(struct zs_port *); - -static void zs_start_tx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - if (zport->tx_stopped) { - zs_transmit_drain(zport, 0); - zport->tx_stopped = 0; - zs_raw_transmit_chars(zport); - } - spin_unlock(&scc->zlock); -} - -static void zs_stop_rx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - - spin_lock(&scc->zlock); - zport->regs[15] &= ~BRKIE; - zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB); - zport->regs[1] |= RxINT_DISAB; - - if (zport != zport_a) { - /* A-side DCD tracks RI and SYNC tracks DSR. */ - zport_a->regs[15] &= ~(DCDIE | SYNCIE); - write_zsreg(zport_a, R15, zport_a->regs[15]); - if (!(zport_a->regs[15] & BRKIE)) { - zport_a->regs[1] &= ~EXT_INT_ENAB; - write_zsreg(zport_a, R1, zport_a->regs[1]); - } - - /* This-side DCD tracks DCD and CTS tracks CTS. */ - zport->regs[15] &= ~(DCDIE | CTSIE); - zport->regs[1] &= ~EXT_INT_ENAB; - } else { - /* DCD tracks RI and SYNC tracks DSR for the B side. */ - if (!(zport->regs[15] & (DCDIE | SYNCIE))) - zport->regs[1] &= ~EXT_INT_ENAB; - } - - write_zsreg(zport, R15, zport->regs[15]); - write_zsreg(zport, R1, zport->regs[1]); - spin_unlock(&scc->zlock); -} - -static void zs_enable_ms(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - - if (zport == zport_a) - return; - - spin_lock(&scc->zlock); - - /* Clear Ext interrupts if not being handled already. */ - if (!(zport_a->regs[1] & EXT_INT_ENAB)) - write_zsreg(zport_a, R0, RES_EXT_INT); - - /* A-side DCD tracks RI and SYNC tracks DSR. */ - zport_a->regs[1] |= EXT_INT_ENAB; - zport_a->regs[15] |= DCDIE | SYNCIE; - - /* This-side DCD tracks DCD and CTS tracks CTS. */ - zport->regs[15] |= DCDIE | CTSIE; - - zs_raw_xor_mctrl(zport); - - write_zsreg(zport_a, R1, zport_a->regs[1]); - write_zsreg(zport_a, R15, zport_a->regs[15]); - write_zsreg(zport, R15, zport->regs[15]); - spin_unlock(&scc->zlock); -} - -static void zs_break_ctl(struct uart_port *uport, int break_state) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - if (break_state == -1) - zport->regs[5] |= SND_BRK; - else - zport->regs[5] &= ~SND_BRK; - write_zsreg(zport, R5, zport->regs[5]); - spin_unlock_irqrestore(&scc->zlock, flags); -} - - -/* - * Interrupt handling routines. - */ -#define Rx_BRK 0x0100 /* BREAK event software flag. */ -#define Rx_SYS 0x0200 /* SysRq event software flag. */ - -static void zs_receive_chars(struct zs_port *zport) -{ - struct uart_port *uport = &zport->port; - struct zs_scc *scc = zport->scc; - struct uart_icount *icount; - unsigned int avail, status, ch, flag; - int count; - - for (count = 16; count; count--) { - spin_lock(&scc->zlock); - avail = read_zsreg(zport, R0) & Rx_CH_AV; - spin_unlock(&scc->zlock); - if (!avail) - break; - - spin_lock(&scc->zlock); - status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR); - ch = read_zsdata(zport); - spin_unlock(&scc->zlock); - - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - /* Handle the null char got when BREAK is removed. */ - if (!ch) - status |= zport->tty_break; - if (unlikely(status & - (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) { - zport->tty_break = 0; - - /* Reset the error indication. */ - if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) { - spin_lock(&scc->zlock); - write_zsreg(zport, R0, ERR_RES); - spin_unlock(&scc->zlock); - } - - if (status & (Rx_SYS | Rx_BRK)) { - icount->brk++; - /* SysRq discards the null char. */ - if (status & Rx_SYS) - continue; - } else if (status & FRM_ERR) - icount->frame++; - else if (status & PAR_ERR) - icount->parity++; - if (status & Rx_OVR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & Rx_BRK) - flag = TTY_BREAK; - else if (status & FRM_ERR) - flag = TTY_FRAME; - else if (status & PAR_ERR) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, Rx_OVR, ch, flag); - } - - tty_flip_buffer_push(uport->state->port.tty); -} - -static void zs_raw_transmit_chars(struct zs_port *zport) -{ - struct circ_buf *xmit = &zport->port.state->xmit; - - /* XON/XOFF chars. */ - if (zport->port.x_char) { - write_zsdata(zport, zport->port.x_char); - zport->port.icount.tx++; - zport->port.x_char = 0; - return; - } - - /* If nothing to do or stopped or hardware stopped. */ - if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) { - zs_raw_stop_tx(zport); - return; - } - - /* Send char. */ - write_zsdata(zport, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - zport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&zport->port); - - /* Are we are done? */ - if (uart_circ_empty(xmit)) - zs_raw_stop_tx(zport); -} - -static void zs_transmit_chars(struct zs_port *zport) -{ - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - zs_raw_transmit_chars(zport); - spin_unlock(&scc->zlock); -} - -static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a) -{ - struct uart_port *uport = &zport->port; - struct zs_scc *scc = zport->scc; - unsigned int delta; - u8 status, brk; - - spin_lock(&scc->zlock); - - /* Get status from Read Register 0. */ - status = read_zsreg(zport, R0); - - if (zport->regs[15] & BRKIE) { - brk = status & BRK_ABRT; - if (brk && !zport->brk) { - spin_unlock(&scc->zlock); - if (uart_handle_break(uport)) - zport->tty_break = Rx_SYS; - else - zport->tty_break = Rx_BRK; - spin_lock(&scc->zlock); - } - zport->brk = brk; - } - - if (zport != zport_a) { - delta = zs_raw_xor_mctrl(zport); - spin_unlock(&scc->zlock); - - if (delta & TIOCM_CTS) - uart_handle_cts_change(uport, - zport->mctrl & TIOCM_CTS); - if (delta & TIOCM_CAR) - uart_handle_dcd_change(uport, - zport->mctrl & TIOCM_CAR); - if (delta & TIOCM_RNG) - uport->icount.dsr++; - if (delta & TIOCM_DSR) - uport->icount.rng++; - - if (delta) - wake_up_interruptible(&uport->state->port.delta_msr_wait); - - spin_lock(&scc->zlock); - } - - /* Clear the status condition... */ - write_zsreg(zport, R0, RES_EXT_INT); - - spin_unlock(&scc->zlock); -} - -/* - * This is the Z85C30 driver's generic interrupt routine. - */ -static irqreturn_t zs_interrupt(int irq, void *dev_id) -{ - struct zs_scc *scc = dev_id; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - struct zs_port *zport_b = &scc->zport[ZS_CHAN_B]; - irqreturn_t status = IRQ_NONE; - u8 zs_intreg; - int count; - - /* - * NOTE: The read register 3, which holds the irq status, - * does so for both channels on each chip. Although - * the status value itself must be read from the A - * channel and is only valid when read from channel A. - * Yes... broken hardware... - */ - for (count = 16; count; count--) { - spin_lock(&scc->zlock); - zs_intreg = read_zsreg(zport_a, R3); - spin_unlock(&scc->zlock); - if (!zs_intreg) - break; - - /* - * We do not like losing characters, so we prioritise - * interrupt sources a little bit differently than - * the SCC would, was it allowed to. - */ - if (zs_intreg & CHBRxIP) - zs_receive_chars(zport_b); - if (zs_intreg & CHARxIP) - zs_receive_chars(zport_a); - if (zs_intreg & CHBEXT) - zs_status_handle(zport_b, zport_a); - if (zs_intreg & CHAEXT) - zs_status_handle(zport_a, zport_a); - if (zs_intreg & CHBTxIP) - zs_transmit_chars(zport_b); - if (zs_intreg & CHATxIP) - zs_transmit_chars(zport_a); - - status = IRQ_HANDLED; - } - - return status; -} - - -/* - * Finally, routines used to initialize the serial port. - */ -static int zs_startup(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - int irq_guard; - int ret; - - irq_guard = atomic_add_return(1, &scc->irq_guard); - if (irq_guard == 1) { - ret = request_irq(zport->port.irq, zs_interrupt, - IRQF_SHARED, "scc", scc); - if (ret) { - atomic_add(-1, &scc->irq_guard); - printk(KERN_ERR "zs: can't get irq %d\n", - zport->port.irq); - return ret; - } - } - - spin_lock_irqsave(&scc->zlock, flags); - - /* Clear the receive FIFO. */ - zs_receive_drain(zport); - - /* Clear the interrupt registers. */ - write_zsreg(zport, R0, ERR_RES); - write_zsreg(zport, R0, RES_Tx_P); - /* But Ext only if not being handled already. */ - if (!(zport->regs[1] & EXT_INT_ENAB)) - write_zsreg(zport, R0, RES_EXT_INT); - - /* Finally, enable sequencing and interrupts. */ - zport->regs[1] &= ~RxINT_MASK; - zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; - zport->regs[3] |= RxENABLE; - zport->regs[15] |= BRKIE; - write_zsreg(zport, R1, zport->regs[1]); - write_zsreg(zport, R3, zport->regs[3]); - write_zsreg(zport, R5, zport->regs[5]); - write_zsreg(zport, R15, zport->regs[15]); - - /* Record the current state of RR0. */ - zport->mctrl = zs_raw_get_mctrl(zport); - zport->brk = read_zsreg(zport, R0) & BRK_ABRT; - - zport->tx_stopped = 1; - - spin_unlock_irqrestore(&scc->zlock, flags); - - return 0; -} - -static void zs_shutdown(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - int irq_guard; - - spin_lock_irqsave(&scc->zlock, flags); - - zport->regs[3] &= ~RxENABLE; - write_zsreg(zport, R5, zport->regs[5]); - write_zsreg(zport, R3, zport->regs[3]); - - spin_unlock_irqrestore(&scc->zlock, flags); - - irq_guard = atomic_add_return(-1, &scc->irq_guard); - if (!irq_guard) - free_irq(zport->port.irq, scc); -} - - -static void zs_reset(struct zs_port *zport) -{ - struct zs_scc *scc = zport->scc; - int irq; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - if (!scc->initialised) { - /* Reset the pointer first, just in case... */ - read_zsreg(zport, R0); - /* And let the current transmission finish. */ - zs_line_drain(zport, irq); - write_zsreg(zport, R9, FHWRES); - udelay(10); - write_zsreg(zport, R9, 0); - scc->initialised = 1; - } - load_zsregs(zport, zport->regs, irq); - spin_unlock_irqrestore(&scc->zlock, flags); -} - -static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - int irq; - unsigned int baud, brg; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - - /* Byte size. */ - zport->regs[3] &= ~RxNBITS_MASK; - zport->regs[5] &= ~TxNBITS_MASK; - switch (termios->c_cflag & CSIZE) { - case CS5: - zport->regs[3] |= Rx5; - zport->regs[5] |= Tx5; - break; - case CS6: - zport->regs[3] |= Rx6; - zport->regs[5] |= Tx6; - break; - case CS7: - zport->regs[3] |= Rx7; - zport->regs[5] |= Tx7; - break; - case CS8: - default: - zport->regs[3] |= Rx8; - zport->regs[5] |= Tx8; - break; - } - - /* Parity and stop bits. */ - zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN); - if (termios->c_cflag & CSTOPB) - zport->regs[4] |= SB2; - else - zport->regs[4] |= SB1; - if (termios->c_cflag & PARENB) - zport->regs[4] |= PAR_ENA; - if (!(termios->c_cflag & PARODD)) - zport->regs[4] |= PAR_EVEN; - switch (zport->clk_mode) { - case 64: - zport->regs[4] |= X64CLK; - break; - case 32: - zport->regs[4] |= X32CLK; - break; - case 16: - zport->regs[4] |= X16CLK; - break; - case 1: - zport->regs[4] |= X1CLK; - break; - default: - BUG(); - } - - baud = uart_get_baud_rate(uport, termios, old_termios, 0, - uport->uartclk / zport->clk_mode / 4); - - brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode); - zport->regs[12] = brg & 0xff; - zport->regs[13] = (brg >> 8) & 0xff; - - uart_update_timeout(uport, termios->c_cflag, baud); - - uport->read_status_mask = Rx_OVR; - if (termios->c_iflag & INPCK) - uport->read_status_mask |= FRM_ERR | PAR_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - uport->read_status_mask |= Rx_BRK; - - uport->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= FRM_ERR | PAR_ERR; - if (termios->c_iflag & IGNBRK) { - uport->ignore_status_mask |= Rx_BRK; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= Rx_OVR; - } - - if (termios->c_cflag & CREAD) - zport->regs[3] |= RxENABLE; - else - zport->regs[3] &= ~RxENABLE; - - if (zport != zport_a) { - if (!(termios->c_cflag & CLOCAL)) { - zport->regs[15] |= DCDIE; - } else - zport->regs[15] &= ~DCDIE; - if (termios->c_cflag & CRTSCTS) { - zport->regs[15] |= CTSIE; - } else - zport->regs[15] &= ~CTSIE; - zs_raw_xor_mctrl(zport); - } - - /* Load up the new values. */ - load_zsregs(zport, zport->regs, irq); - - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Hack alert! - * Required solely so that the initial PROM-based console - * works undisturbed in parallel with this one. - */ -static void zs_pm(struct uart_port *uport, unsigned int state, - unsigned int oldstate) -{ - struct zs_port *zport = to_zport(uport); - - if (state < 3) - zport->regs[5] |= TxENAB; - else - zport->regs[5] &= ~TxENAB; - write_zsreg(zport, R5, zport->regs[5]); -} - - -static const char *zs_type(struct uart_port *uport) -{ - return "Z85C30 SCC"; -} - -static void zs_release_port(struct uart_port *uport) -{ - iounmap(uport->membase); - uport->membase = 0; - release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); -} - -static int zs_map_port(struct uart_port *uport) -{ - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - ZS_CHAN_IO_SIZE); - if (!uport->membase) { - printk(KERN_ERR "zs: Cannot map MMIO\n"); - return -ENOMEM; - } - return 0; -} - -static int zs_request_port(struct uart_port *uport) -{ - int ret; - - if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) { - printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); - return -EBUSY; - } - ret = zs_map_port(uport); - if (ret) { - release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); - return ret; - } - return 0; -} - -static void zs_config_port(struct uart_port *uport, int flags) -{ - struct zs_port *zport = to_zport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (zs_request_port(uport)) - return; - - uport->type = PORT_ZS; - - zs_reset(zport); - } -} - -static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - struct zs_port *zport = to_zport(uport); - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - if (ser->baud_base != uport->uartclk / zport->clk_mode / 4) - ret = -EINVAL; - return ret; -} - - -static struct uart_ops zs_ops = { - .tx_empty = zs_tx_empty, - .set_mctrl = zs_set_mctrl, - .get_mctrl = zs_get_mctrl, - .stop_tx = zs_stop_tx, - .start_tx = zs_start_tx, - .stop_rx = zs_stop_rx, - .enable_ms = zs_enable_ms, - .break_ctl = zs_break_ctl, - .startup = zs_startup, - .shutdown = zs_shutdown, - .set_termios = zs_set_termios, - .pm = zs_pm, - .type = zs_type, - .release_port = zs_release_port, - .request_port = zs_request_port, - .config_port = zs_config_port, - .verify_port = zs_verify_port, -}; - -/* - * Initialize Z85C30 port structures. - */ -static int __init zs_probe_sccs(void) -{ - static int probed; - struct zs_parms zs_parms; - int chip, side, irq; - int n_chips = 0; - int i; - - if (probed) - return 0; - - irq = dec_interrupt[DEC_IRQ_SCC0]; - if (irq >= 0) { - zs_parms.scc[n_chips] = IOASIC_SCC0; - zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0]; - n_chips++; - } - irq = dec_interrupt[DEC_IRQ_SCC1]; - if (irq >= 0) { - zs_parms.scc[n_chips] = IOASIC_SCC1; - zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1]; - n_chips++; - } - if (!n_chips) - return -ENXIO; - - probed = 1; - - for (chip = 0; chip < n_chips; chip++) { - spin_lock_init(&zs_sccs[chip].zlock); - for (side = 0; side < ZS_NUM_CHAN; side++) { - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct uart_port *uport = &zport->port; - - zport->scc = &zs_sccs[chip]; - zport->clk_mode = 16; - - uport->irq = zs_parms.irq[chip]; - uport->uartclk = ZS_CLOCK; - uport->fifosize = 1; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &zs_ops; - uport->line = chip * ZS_NUM_CHAN + side; - uport->mapbase = dec_kn_slot_base + - zs_parms.scc[chip] + - (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE; - - for (i = 0; i < ZS_NUM_REGS; i++) - zport->regs[i] = zs_init_regs[i]; - } - } - - return 0; -} - - -#ifdef CONFIG_SERIAL_ZS_CONSOLE -static void zs_console_putchar(struct uart_port *uport, int ch) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - int irq; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - if (zs_transmit_drain(zport, irq)) - write_zsdata(zport, ch); - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void zs_console_write(struct console *co, const char *s, - unsigned int count) -{ - int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct zs_scc *scc = zport->scc; - unsigned long flags; - u8 txint, txenb; - int irq; - - /* Disable transmit interrupts and enable the transmitter. */ - spin_lock_irqsave(&scc->zlock, flags); - txint = zport->regs[1]; - txenb = zport->regs[5]; - if (txint & TxINT_ENAB) { - zport->regs[1] = txint & ~TxINT_ENAB; - write_zsreg(zport, R1, zport->regs[1]); - } - if (!(txenb & TxENAB)) { - zport->regs[5] = txenb | TxENAB; - write_zsreg(zport, R5, zport->regs[5]); - } - spin_unlock_irqrestore(&scc->zlock, flags); - - uart_console_write(&zport->port, s, count, zs_console_putchar); - - /* Restore transmit interrupts and the transmitter enable. */ - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - zs_line_drain(zport, irq); - if (!(txenb & TxENAB)) { - zport->regs[5] &= ~TxENAB; - write_zsreg(zport, R5, zport->regs[5]); - } - if (txint & TxINT_ENAB) { - zport->regs[1] |= TxINT_ENAB; - write_zsreg(zport, R1, zport->regs[1]); - } - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Setup serial console baud/bits/parity. We do two things here: - * - construct a cflag setting for the first uart_open() - * - initialise the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init zs_console_setup(struct console *co, char *options) -{ - int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct uart_port *uport = &zport->port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - ret = zs_map_port(uport); - if (ret) - return ret; - - zs_reset(zport); - zs_pm(uport, 0, -1); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(uport, co, baud, parity, bits, flow); -} - -static struct uart_driver zs_reg; -static struct console zs_console = { - .name = "ttyS", - .write = zs_console_write, - .device = uart_console_device, - .setup = zs_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &zs_reg, -}; - -/* - * Register console. - */ -static int __init zs_serial_console_init(void) -{ - int ret; - - ret = zs_probe_sccs(); - if (ret) - return ret; - register_console(&zs_console); - - return 0; -} - -console_initcall(zs_serial_console_init); - -#define SERIAL_ZS_CONSOLE &zs_console -#else -#define SERIAL_ZS_CONSOLE NULL -#endif /* CONFIG_SERIAL_ZS_CONSOLE */ - -static struct uart_driver zs_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = ZS_NUM_SCCS * ZS_NUM_CHAN, - .cons = SERIAL_ZS_CONSOLE, -}; - -/* zs_init inits the driver. */ -static int __init zs_init(void) -{ - int i, ret; - - pr_info("%s%s\n", zs_name, zs_version); - - /* Find out how many Z85C30 SCCs we have. */ - ret = zs_probe_sccs(); - if (ret) - return ret; - - ret = uart_register_driver(&zs_reg); - if (ret) - return ret; - - for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { - struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; - struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; - struct uart_port *uport = &zport->port; - - if (zport->scc) - uart_add_one_port(&zs_reg, uport); - } - - return 0; -} - -static void __exit zs_exit(void) -{ - int i; - - for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) { - struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; - struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; - struct uart_port *uport = &zport->port; - - if (zport->scc) - uart_remove_one_port(&zs_reg, uport); - } - - uart_unregister_driver(&zs_reg); -} - -module_init(zs_init); -module_exit(zs_exit); diff --git a/drivers/serial/zs.h b/drivers/serial/zs.h deleted file mode 100644 index aa921b5..0000000 --- a/drivers/serial/zs.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * zs.h: Definitions for the DECstation Z85C30 serial driver. - * - * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. - * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. - * - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 2004, 2005, 2007 Maciej W. Rozycki - */ -#ifndef _SERIAL_ZS_H -#define _SERIAL_ZS_H - -#ifdef __KERNEL__ - -#define ZS_NUM_REGS 16 - -/* - * This is our internal structure for each serial port's state. - */ -struct zs_port { - struct zs_scc *scc; /* Containing SCC. */ - struct uart_port port; /* Underlying UART. */ - - int clk_mode; /* May be 1, 16, 32, or 64. */ - - unsigned int tty_break; /* Set on BREAK condition. */ - int tx_stopped; /* Output is suspended. */ - - unsigned int mctrl; /* State of modem lines. */ - u8 brk; /* BREAK state from RR0. */ - - u8 regs[ZS_NUM_REGS]; /* Channel write registers. */ -}; - -/* - * Per-SCC state for locking and the interrupt handler. - */ -struct zs_scc { - struct zs_port zport[2]; - spinlock_t zlock; - atomic_t irq_guard; - int initialised; -}; - -#endif /* __KERNEL__ */ - -/* - * Conversion routines to/from brg time constants from/to bits per second. - */ -#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* - * The Zilog register set. - */ - -/* Write Register 0 (Command) */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */ -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define RxINT_ALL 0x10 /* Int on all Rx Characters or error */ -#define RxINT_ERR 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register 2 (Interrupt Vector) */ - -/* Write Register 3 (Receive Parameters and Control) */ -#define RxENABLE 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxNBITS_MASK 0xc0 - -/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */ -#define PAR_ENA 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ -#define SB_MASK 0xc - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xc0 /* x64 clock mode */ -#define XCLK_MASK 0xc0 - -/* Write Register 5 (Transmit Parameters and Controls) */ -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxNBITS_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 8 (Transmit Buffer) */ - -/* Write Register 9 (Master Interrupt Control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode Control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */ - -/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */ - -/* Write Register 14 (Miscellaneous Control Bits) */ -#define BRENABL 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (External/Status Interrupt Control) */ -#define WR7P_EN 1 /* WR7 Prime SDLC Feature Enable */ -#define ZCIE 2 /* Zero count IE */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC_HUNT 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 (Special Receive Condition Status) */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity Error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define FRM_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (Interrupt Vector (WR2) -- channel A). */ - -/* Read Register 2 (Modified Interrupt Vector -- channel B). */ - -/* Read Register 3 (Interrupt Pending Bits -- channel A only). */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */ - -/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */ - -/* Read Register 8 (Receive Data) */ - -/* Read Register 10 (Miscellaneous Status Bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */ - -/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */ - -/* Read Register 15 (External/Status Interrupt Control (WR15)) */ - -#endif /* _SERIAL_ZS_H */ diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index d3685f0..3962772 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ +obj-y += serial/ diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c new file mode 100644 index 0000000..d89aa38 --- /dev/null +++ b/drivers/tty/serial/21285.c @@ -0,0 +1,513 @@ +/* + * linux/drivers/serial/21285.c + * + * Driver for the serial port on the 21285 StrongArm-110 core logic chip. + * + * Based on drivers/char/serial.c + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define BAUD_BASE (mem_fclk_21285/64) + +#define SERIAL_21285_NAME "ttyFB" +#define SERIAL_21285_MAJOR 204 +#define SERIAL_21285_MINOR 4 + +#define RXSTAT_DUMMY_READ 0x80000000 +#define RXSTAT_FRAME (1 << 0) +#define RXSTAT_PARITY (1 << 1) +#define RXSTAT_OVERRUN (1 << 2) +#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) + +#define H_UBRLCR_BREAK (1 << 0) +#define H_UBRLCR_PARENB (1 << 1) +#define H_UBRLCR_PAREVN (1 << 2) +#define H_UBRLCR_STOPB (1 << 3) +#define H_UBRLCR_FIFO (1 << 4) + +static const char serial21285_name[] = "Footbridge UART"; + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* + * The documented expression for selecting the divisor is: + * BAUD_BASE / baud - 1 + * However, typically BAUD_BASE is not divisible by baud, so + * we want to select the divisor that gives us the minimum + * error. Therefore, we want: + * int(BAUD_BASE / baud - 0.5) -> + * int(BAUD_BASE / baud - (baud >> 1) / baud) -> + * int((BAUD_BASE - (baud >> 1)) / baud) + */ + +static void serial21285_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + disable_irq_nosync(IRQ_CONTX); + tx_enabled(port) = 0; + } +} + +static void serial21285_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(IRQ_CONTX); + tx_enabled(port) = 1; + } +} + +static void serial21285_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + disable_irq_nosync(IRQ_CONRX); + rx_enabled(port) = 0; + } +} + +static void serial21285_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, flag, rxs, max_count = 256; + + status = *CSR_UARTFLG; + while (!(status & 0x10) && max_count--) { + ch = *CSR_UARTDR; + flag = TTY_NORMAL; + port->icount.rx++; + + rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; + if (unlikely(rxs & RXSTAT_ANYERR)) { + if (rxs & RXSTAT_PARITY) + port->icount.parity++; + else if (rxs & RXSTAT_FRAME) + port->icount.frame++; + if (rxs & RXSTAT_OVERRUN) + port->icount.overrun++; + + rxs &= port->read_status_mask; + + if (rxs & RXSTAT_PARITY) + flag = TTY_PARITY; + else if (rxs & RXSTAT_FRAME) + flag = TTY_FRAME; + } + + uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); + + status = *CSR_UARTFLG; + } + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + int count = 256; + + if (port->x_char) { + *CSR_UARTDR = port->x_char; + port->icount.tx++; + port->x_char = 0; + goto out; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + serial21285_stop_tx(port); + goto out; + } + + do { + *CSR_UARTDR = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial21285_stop_tx(port); + + out: + return IRQ_HANDLED; +} + +static unsigned int serial21285_tx_empty(struct uart_port *port) +{ + return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; +} + +/* no modem control lines */ +static unsigned int serial21285_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial21285_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int h_lcr; + + spin_lock_irqsave(&port->lock, flags); + h_lcr = *CSR_H_UBRLCR; + if (break_state) + h_lcr |= H_UBRLCR_BREAK; + else + h_lcr &= ~H_UBRLCR_BREAK; + *CSR_H_UBRLCR = h_lcr; + spin_unlock_irqrestore(&port->lock, flags); +} + +static int serial21285_startup(struct uart_port *port) +{ + int ret; + + tx_enabled(port) = 1; + rx_enabled(port) = 1; + + ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, + serial21285_name, port); + if (ret == 0) { + ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, + serial21285_name, port); + if (ret) + free_irq(IRQ_CONRX, port); + } + + return ret; +} + +static void serial21285_shutdown(struct uart_port *port) +{ + free_irq(IRQ_CONTX, port); + free_irq(IRQ_CONRX, port); +} + +static void +serial21285_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot, h_lcr, b; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * We don't support BREAK character recognition. + */ + termios->c_iflag &= ~(IGNBRK | BRKINT); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + b = port->uartclk / (16 * quot); + tty_termios_encode_baud_rate(termios, b, b); + + switch (termios->c_cflag & CSIZE) { + case CS5: + h_lcr = 0x00; + break; + case CS6: + h_lcr = 0x20; + break; + case CS7: + h_lcr = 0x40; + break; + default: /* CS8 */ + h_lcr = 0x60; + break; + } + + if (termios->c_cflag & CSTOPB) + h_lcr |= H_UBRLCR_STOPB; + if (termios->c_cflag & PARENB) { + h_lcr |= H_UBRLCR_PARENB; + if (!(termios->c_cflag & PARODD)) + h_lcr |= H_UBRLCR_PAREVN; + } + + if (port->fifosize) + h_lcr |= H_UBRLCR_FIFO; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = RXSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_OVERRUN; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + quot -= 1; + + *CSR_UARTCON = 0; + *CSR_L_UBRLCR = quot & 0xff; + *CSR_M_UBRLCR = (quot >> 8) & 0x0f; + *CSR_H_UBRLCR = h_lcr; + *CSR_UARTCON = 1; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *serial21285_type(struct uart_port *port) +{ + return port->type == PORT_21285 ? "DC21285" : NULL; +} + +static void serial21285_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 32); +} + +static int serial21285_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 32, serial21285_name) + != NULL ? 0 : -EBUSY; +} + +static void serial21285_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) + port->type = PORT_21285; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) + ret = -EINVAL; + if (ser->irq != NO_IRQ) + ret = -EINVAL; + if (ser->baud_base != port->uartclk / 16) + ret = -EINVAL; + return ret; +} + +static struct uart_ops serial21285_ops = { + .tx_empty = serial21285_tx_empty, + .get_mctrl = serial21285_get_mctrl, + .set_mctrl = serial21285_set_mctrl, + .stop_tx = serial21285_stop_tx, + .start_tx = serial21285_start_tx, + .stop_rx = serial21285_stop_rx, + .enable_ms = serial21285_enable_ms, + .break_ctl = serial21285_break_ctl, + .startup = serial21285_startup, + .shutdown = serial21285_shutdown, + .set_termios = serial21285_set_termios, + .type = serial21285_type, + .release_port = serial21285_release_port, + .request_port = serial21285_request_port, + .config_port = serial21285_config_port, + .verify_port = serial21285_verify_port, +}; + +static struct uart_port serial21285_port = { + .mapbase = 0x42000160, + .iotype = UPIO_MEM, + .irq = NO_IRQ, + .fifosize = 16, + .ops = &serial21285_ops, + .flags = UPF_BOOT_AUTOCONF, +}; + +static void serial21285_setup_ports(void) +{ + serial21285_port.uartclk = mem_fclk_21285 / 4; +} + +#ifdef CONFIG_SERIAL_21285_CONSOLE +static void serial21285_console_putchar(struct uart_port *port, int ch) +{ + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = ch; +} + +static void +serial21285_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); +} + +static void __init +serial21285_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (*CSR_UARTCON == 1) { + unsigned int tmp; + + tmp = *CSR_H_UBRLCR; + switch (tmp & 0x60) { + case 0x00: + *bits = 5; + break; + case 0x20: + *bits = 6; + break; + case 0x40: + *bits = 7; + break; + default: + case 0x60: + *bits = 8; + break; + } + + if (tmp & H_UBRLCR_PARENB) { + *parity = 'o'; + if (tmp & H_UBRLCR_PAREVN) + *parity = 'e'; + } + + tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); + + *baud = port->uartclk / (16 * (tmp + 1)); + } +} + +static int __init serial21285_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &serial21285_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (machine_is_personal_server()) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + serial21285_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial21285_reg; + +static struct console serial21285_console = +{ + .name = SERIAL_21285_NAME, + .write = serial21285_console_write, + .device = uart_console_device, + .setup = serial21285_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial21285_reg, +}; + +static int __init rs285_console_init(void) +{ + serial21285_setup_ports(); + register_console(&serial21285_console); + return 0; +} +console_initcall(rs285_console_init); + +#define SERIAL_21285_CONSOLE &serial21285_console +#else +#define SERIAL_21285_CONSOLE NULL +#endif + +static struct uart_driver serial21285_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyFB", + .dev_name = "ttyFB", + .major = SERIAL_21285_MAJOR, + .minor = SERIAL_21285_MINOR, + .nr = 1, + .cons = SERIAL_21285_CONSOLE, +}; + +static int __init serial21285_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: 21285 driver\n"); + + serial21285_setup_ports(); + + ret = uart_register_driver(&serial21285_reg); + if (ret == 0) + uart_add_one_port(&serial21285_reg, &serial21285_port); + + return ret; +} + +static void __exit serial21285_exit(void) +{ + uart_remove_one_port(&serial21285_reg, &serial21285_port); + uart_unregister_driver(&serial21285_reg); +} + +module_init(serial21285_init); +module_exit(serial21285_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); +MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c new file mode 100644 index 0000000..be0ebce --- /dev/null +++ b/drivers/tty/serial/68328serial.c @@ -0,0 +1,1472 @@ +/* 68328serial.c: Serial port driver for 68328 microcontroller + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * Copyright (C) 2002-2003 David McCullough + * Copyright (C) 2002 Greg Ungerer + * + * VZ Support/Fixes Evan Stawnyczy + * Multiple UART support Daniel Potts + * Power management support Daniel Potts + * VZ Second Serial Port enable Phil Wilshire + * 2.4/2.5 port David McCullough + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* (es) */ +/* note: perhaps we can murge these files, so that you can just + * define 1 of them, and they can sort that out for themselves + */ +#if defined(CONFIG_M68EZ328) +#include +#else +#if defined(CONFIG_M68VZ328) +#include +#else +#include +#endif /* CONFIG_M68VZ328 */ +#endif /* CONFIG_M68EZ328 */ + +#include "68328serial.h" + +/* Turn off usage of real serial interrupt code, to "support" Copilot */ +#ifdef CONFIG_XCOPILOT_BUGS +#undef USE_INTS +#else +#define USE_INTS +#endif + +static struct m68k_serial m68k_soft[NR_PORTS]; + +static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; + +/* multiple ports are contiguous in memory */ +m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; + +struct tty_struct m68k_ttys; +struct m68k_serial *m68k_consinfo = 0; + +#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ + +struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... DEBUG_INTR is bad to use when one of the zs + * lines is your console ;( + */ +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#define RS_ISR_PASS_LIMIT 256 + +static void change_speed(struct m68k_serial *info); + +/* + * Setup for console. Argument comes from the boot command line. + */ + +/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ +#ifdef CONFIG_M68VZ328 +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 +#endif + + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + + +static int m68328_console_initted = 0; +static int m68328_console_baud = CONSOLE_BAUD_RATE; +static int m68328_console_cbaud = DEFAULT_CBAUD; + + +static inline int serial_paranoia_check(struct m68k_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct %s in %s\n"; + static const char *badinfo = + "Warning: null m68k_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 0 }; + +/* Sets or clears DTR/RTS on the requested line */ +static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) +{ + if (set) { + /* set the RTS/CTS line */ + } else { + /* clear it */ + } + return; +} + +/* Utility routines */ +static inline int get_baud(struct m68k_serial *ss) +{ + unsigned long result = 115200; + unsigned short int baud = uart_addr[ss->line].ubaud; + if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; + result >>= GET_FIELD(baud, UBAUD_DIVIDE); + + return result; +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + uart->ustcnt &= ~USTCNT_TXEN; + local_irq_restore(flags); +} + +static int rs_put_char(char ch) +{ + int flags, loops = 0; + + local_irq_save(flags); + + while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { + loops++; + udelay(5); + } + + UTX_TXDATA = ch; + udelay(5); + local_irq_restore(flags); + return 1; +} + +static void rs_start(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + local_irq_save(flags); + if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + } + local_irq_restore(flags); +} + +/* Drop into either the boot monitor or kadb upon receiving a break + * from keyboard/console input. + */ +static void batten_down_hatches(void) +{ + /* Drop into the debugger */ +} + +static void status_handle(struct m68k_serial *info, unsigned short status) +{ +#if 0 + if(status & DCD) { + if((info->port.tty->termios->c_cflag & CRTSCTS) && + ((info->curregs[3] & AUTO_ENAB)==0)) { + info->curregs[3] |= AUTO_ENAB; + info->pendregs[3] |= AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } else { + if((info->curregs[3] & AUTO_ENAB)) { + info->curregs[3] &= ~AUTO_ENAB; + info->pendregs[3] &= ~AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } +#endif + /* If this is console input and this is a + * 'break asserted' status change interrupt + * see if we can drop into the debugger + */ + if((status & URX_BREAK) && info->break_abort) + batten_down_hatches(); + return; +} + +static void receive_chars(struct m68k_serial *info, unsigned short rx) +{ + struct tty_struct *tty = info->port.tty; + m68328_uart *uart = &uart_addr[info->line]; + unsigned char ch, flag; + + /* + * This do { } while() loop will get ALL chars out of Rx FIFO + */ +#ifndef CONFIG_XCOPILOT_BUGS + do { +#endif + ch = GET_FIELD(rx, URX_RXDATA); + + if(info->is_cons) { + if(URX_BREAK & rx) { /* whee, break received */ + status_handle(info, rx); + return; +#ifdef CONFIG_MAGIC_SYSRQ + } else if (ch == 0x10) { /* ^P */ + show_state(); + show_free_areas(); + show_buffers(); +/* show_net_buffers(); */ + return; + } else if (ch == 0x12) { /* ^R */ + emergency_restart(); + return; +#endif /* CONFIG_MAGIC_SYSRQ */ + } + } + + if(!tty) + goto clear_and_exit; + + flag = TTY_NORMAL; + + if(rx & URX_PARITY_ERROR) { + flag = TTY_PARITY; + status_handle(info, rx); + } else if(rx & URX_OVRUN) { + flag = TTY_OVERRUN; + status_handle(info, rx); + } else if(rx & URX_FRAME_ERROR) { + flag = TTY_FRAME; + status_handle(info, rx); + } + tty_insert_flip_char(tty, ch, flag); +#ifndef CONFIG_XCOPILOT_BUGS + } while((rx = uart->urx.w) & URX_DATA_READY); +#endif + + tty_schedule_flip(tty); + +clear_and_exit: + return; +} + +static void transmit_chars(struct m68k_serial *info) +{ + m68328_uart *uart = &uart_addr[info->line]; + + if (info->x_char) { + /* Send next char */ + uart->utx.b.txdata = info->x_char; + info->x_char = 0; + goto clear_and_return; + } + + if((info->xmit_cnt <= 0) || info->port.tty->stopped) { + /* That's peculiar... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + + if(info->xmit_cnt <= 0) { + /* All done for now... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + +clear_and_return: + /* Clear interrupt (should be auto)*/ + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t rs_interrupt(int irq, void *dev_id) +{ + struct m68k_serial *info = dev_id; + m68328_uart *uart; + unsigned short rx; + unsigned short tx; + + uart = &uart_addr[info->line]; + rx = uart->urx.w; + +#ifdef USE_INTS + tx = uart->utx.w; + + if (rx & URX_DATA_READY) receive_chars(info, rx); + if (tx & UTX_TX_AVAIL) transmit_chars(info); +#else + receive_chars(info, rx); +#endif + return IRQ_HANDLED; +} + +static void do_softint(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; +#if 0 + if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +#endif +} + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (info->flags & S_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + local_irq_save(flags); + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + uart->ustcnt = USTCNT_UEN; + info->xmit_fifo_size = 1; + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; + (void)uart->urx.w; + + /* + * Finally, enable sequencing and interrupts + */ +#ifdef USE_INTS + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | + USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; +#endif + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + + change_speed(info); + + info->flags |= S_INITIALIZED; + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + uart->ustcnt = 0; /* All off! */ + if (!(info->flags & S_INITIALIZED)) + return; + + local_irq_save(flags); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~S_INITIALIZED; + local_irq_restore(flags); +} + +struct { + int divisor, prescale; +} +#ifndef CONFIG_M68VZ328 + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {7,0x26}, /* 300 */ + {6,0x26}, /* 600 */ + {5,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {4,0x26}, /* 2400 */ + {3,0x26}, /* 4800 */ + {2,0x26}, /* 9600 */ + {1,0x26}, /* 19200 */ + {0,0x26}, /* 38400 */ + {1,0x38}, /* 57600 */ + {0,0x38}, /* 115200 */ +}; +#else + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {0,0}, /* 300 */ + {7,0x26}, /* 600 */ + {6,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {5,0x26}, /* 2400 */ + {4,0x26}, /* 4800 */ + {3,0x26}, /* 9600 */ + {2,0x26}, /* 19200 */ + {1,0x26}, /* 38400 */ + {0,0x26}, /* 57600 */ + {1,0x38}, /* 115200 */ +}; +#endif +/* rate = 1036800 / ((65 - prescale) * (1<line]; + unsigned short port; + unsigned short ustcnt; + unsigned cflag; + int i; + + if (!info->port.tty || !info->port.tty->termios) + return; + cflag = info->port.tty->termios->c_cflag; + if (!(port = info->port)) + return; + + ustcnt = uart->ustcnt; + uart->ustcnt = ustcnt & ~USTCNT_TXEN; + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i = (i & ~CBAUDEX) + B38400; + } + + info->baud = baud_table[i]; + uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + + if ((cflag & CSIZE) == CS8) + ustcnt |= USTCNT_8_7; + + if (cflag & CSTOPB) + ustcnt |= USTCNT_STOP; + + if (cflag & PARENB) + ustcnt |= USTCNT_PARITYEN; + if (cflag & PARODD) + ustcnt |= USTCNT_ODD_EVEN; + +#ifdef CONFIG_SERIAL_68328_RTS_CTS + if (cflag & CRTSCTS) { + uart->utx.w &= ~ UTX_NOCTS; + } else { + uart->utx.w |= UTX_NOCTS; + } +#endif + + ustcnt |= USTCNT_TXEN; + + uart->ustcnt = ustcnt; + return; +} + +/* + * Fair output driver allows a process to speak. + */ +static void rs_fair_output(void) +{ + int left; /* Output no more than that */ + unsigned long flags; + struct m68k_serial *info = &m68k_soft[0]; + char c; + + if (info == 0) return; + if (info->xmit_buf == 0) return; + + local_irq_save(flags); + left = info->xmit_cnt; + while (left != 0) { + c = info->xmit_buf[info->xmit_tail]; + info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + local_irq_restore(flags); + + rs_put_char(c); + + local_irq_save(flags); + left = min(info->xmit_cnt, left-1); + } + + /* Last character is being transmitted now (hopefully). */ + udelay(5); + + local_irq_restore(flags); + return; +} + +/* + * m68k_console_print is registered for printk. + */ +void console_print_68328(const char *p) +{ + char c; + + while((c=*(p++)) != 0) { + if(c == '\n') + rs_put_char('\r'); + rs_put_char(c); + } + + /* Comment this if you want to have a strict interrupt-driven output */ + rs_fair_output(); + + return; +} + +static void rs_set_ldisc(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) + return; + + info->is_cons = (tty->termios->c_line == N_TTY); + + printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; +#ifndef USE_INTS + for(;;) { +#endif + + /* Enable transmitter */ + local_irq_save(flags); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) { + local_irq_restore(flags); + return; + } + +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + +#ifdef USE_INTS + if (uart->utx.w & UTX_TX_AVAIL) { +#else + if (1) { +#endif + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); + } +#endif + local_irq_restore(flags); +} + +extern void console_printn(const char * b, int count); + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, total = 0; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + local_save_flags(flags); + while (1) { + local_irq_disable(); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + local_irq_restore(flags); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + /* Enable transmitter */ + local_irq_disable(); +#ifndef USE_INTS + while(info->xmit_cnt) { +#endif + + uart->ustcnt |= USTCNT_TXEN; +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TX_INTR_MASK; +#else + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); +#endif + if (uart->utx.w & UTX_TX_AVAIL) { + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + } +#endif + local_irq_restore(flags); + } + + return total; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct m68k_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +static int set_serial_info(struct m68k_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct m68k_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~S_USR_MASK) != + (info->flags & ~S_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~S_USR_MASK) | + (new_serial.flags & S_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~S_FLAGS) | + (new_serial.flags & S_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct m68k_serial * info, unsigned int *value) +{ +#ifdef CONFIG_SERIAL_68328_RTS_CTS + m68328_uart *uart = &uart_addr[info->line]; +#endif + unsigned char status; + unsigned long flags; + + local_irq_save(flags); +#ifdef CONFIG_SERIAL_68328_RTS_CTS + status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; +#else + status = 0; +#endif + local_irq_restore(flags); + return put_user(status, value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(struct m68k_serial * info, unsigned int duration) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + if (!info->port) + return; + local_irq_save(flags); +#ifdef USE_INTS + uart->utx.w |= UTX_SEND_BREAK; + msleep_interruptible(duration); + uart->utx.w &= ~UTX_SEND_BREAK; +#endif + local_irq_restore(flags); +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + int retval; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, 250); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(100) : 250); + return 0; + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + case TIOCSERGSTRUCT: + if (copy_to_user((struct m68k_serial *) arg, + info, sizeof(struct m68k_serial))) + return -EFAULT; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= S_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != S_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + uart->ustcnt &= ~USTCNT_RXEN; + uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); + + shutdown(info); + rs_flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; +#warning "This is not and has never been valid so fix it" +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void rs_hangup(struct tty_struct *tty) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~S_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct m68k_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & S_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= S_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + info->count--; + info->blocked_open++; + while (1) { + local_irq_disable(); + m68k_rtsdtr(info, 1); + local_irq_enable(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & S_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & S_CLOSING) && do_clocal) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + + if (retval) + return retval; + info->flags |= S_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its S structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial *info; + int retval, line; + + line = tty->index; + + if (line >= NR_PORTS || line < 0) /* we have exactly one */ + return -ENODEV; + + info = &m68k_soft[line]; + + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + + info->count++; + tty->driver_data = info; + info->port.tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + return block_til_ready(tty, filp, info); +} + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk("MC68328 serial driver version 1.00\n"); +} + +static const struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .set_ldisc = rs_set_ldisc, +}; + +/* rs_init inits the driver */ +static int __init +rs68328_init(void) +{ + int flags, i; + struct m68k_serial *info; + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + /* SPARC: Not all of this is exactly right for us. */ + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_ops); + + if (tty_register_driver(serial_driver)) { + put_tty_driver(serial_driver); + printk(KERN_ERR "Couldn't register serial driver\n"); + return -ENOMEM; + } + + local_irq_save(flags); + + for(i=0;imagic = SERIAL_MAGIC; + info->port = (int) &uart_addr[i]; + info->port.tty = NULL; + info->irq = uart_irqs[i]; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, do_softint); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->line = i; + info->is_cons = 1; /* Means shortcuts work */ + + printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, + info->port, info->irq); + printk(" is a builtin MC68328 UART\n"); + +#ifdef CONFIG_M68VZ328 + if (i > 0 ) + PJSEL &= 0xCF; /* PSW enable second port output */ +#endif + + if (request_irq(uart_irqs[i], + rs_interrupt, + IRQF_DISABLED, + "M68328_UART", info)) + panic("Unable to attach 68328 serial interrupt\n"); + } + local_irq_restore(flags); + return 0; +} + +module_init(rs68328_init); + + + +static void m68328_set_baud(void) +{ + unsigned short ustcnt; + int i; + + ustcnt = USTCNT; + USTCNT = ustcnt & ~USTCNT_TXEN; + +again: + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == m68328_console_baud) + break; + if (i >= ARRAY_SIZE(baud_table)) { + m68328_console_baud = 9600; + goto again; + } + + UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + ustcnt |= USTCNT_8_7; + ustcnt |= USTCNT_TXEN; + USTCNT = ustcnt; + m68328_console_initted = 1; + return; +} + + +int m68328_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == n) + break; + if (i < ARRAY_SIZE(baud_table)) { + m68328_console_baud = n; + m68328_console_cbaud = 0; + if (i > 15) { + m68328_console_cbaud |= CBAUDEX; + i -= 15; + } + m68328_console_cbaud |= i; + } + + m68328_set_baud(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *m68328_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +void m68328_console_write (struct console *co, const char *str, + unsigned int count) +{ + if (!m68328_console_initted) + m68328_set_baud(); + while (count--) { + if (*str == '\n') + rs_put_char('\r'); + rs_put_char( *str++ ); + } +} + + +static struct console m68328_driver = { + .name = "ttyS", + .write = m68328_console_write, + .device = m68328_console_device, + .setup = m68328_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init m68328_console_init(void) +{ + register_console(&m68328_driver); + return 0; +} + +console_initcall(m68328_console_init); diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h new file mode 100644 index 0000000..664ceb0 --- /dev/null +++ b/drivers/tty/serial/68328serial.h @@ -0,0 +1,188 @@ +/* 68328serial.h: Definitions for the mc68328 serial driver. + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * + * VZ Support/Fixes Evan Stawnyczy + */ + +#ifndef _MC683XX_SERIAL_H +#define _MC683XX_SERIAL_H + + +struct serial_struct { + int type; + int line; + int port; + int irq; + int flags; + int xmit_fifo_size; + int custom_divisor; + int baud_base; + unsigned short close_delay; + char reserved_char[2]; + int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + int reserved[4]; +}; + +/* + * For the close wait times, 0 means wait forever for serial port to + * flush its output. 65535 means don't wait at all. + */ +#define S_CLOSING_WAIT_INF 0 +#define S_CLOSING_WAIT_NONE 65535 + +/* + * Definitions for S_struct (and serial_struct) flags field + */ +#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes + on the callout port */ +#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ +#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ +#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ + +#define S_SPD_MASK 0x0030 +#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ + +#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ +#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ + +#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ +#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ +#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ +#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ +#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ + +#define S_FLAGS 0x0FFF /* Possible legal S flags */ +#define S_USR_MASK 0x0430 /* Legal flags that non-privileged + * users can set or reset */ + +/* Internal flags used only by kernel/chr_drv/serial.c */ +#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ +#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ +#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ +#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ +#define S_CLOSING 0x08000000 /* Serial port is closing */ +#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ +#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ + +/* Software state per channel */ + +#ifdef __KERNEL__ + +/* + * I believe this is the optimal setting that reduces the number of interrupts. + * At high speeds the output might become a little "bursted" (use USTCNT_TXHE + * if that bothers you), but in most cases it will not, since we try to + * transmit characters every time rs_interrupt is called. Thus, quite often + * you'll see that a receive interrupt occures before the transmit one. + * -- Vladimir Gurevich + */ +#define USTCNT_TX_INTR_MASK (USTCNT_TXEE) + +/* + * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special + * "Old data interrupt" which occures whenever the data stay in the FIFO + * longer than 30 bits time. This allows us to use FIFO without compromising + * latency. '328 does not have this feature and without the real 328-based + * board I would assume that RXRE is the safest setting. + * + * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of + * interrupts. RXFE (receive queue full) causes the system to lose data + * at least at 115200 baud + * + * If your board is busy doing other stuff, you might consider to use + * RXRE (data ready intrrupt) instead. + * + * The other option is to make these INTR masks run-time configurable, so + * that people can dynamically adapt them according to the current usage. + * -- Vladimir Gurevich + */ + +/* (es) */ +#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN) +#elif defined(CONFIG_M68328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXRE) +#else +#error Please, define the Rx interrupt events for your CPU +#endif +/* (/es) */ + +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +struct m68k_serial { + char soft_carrier; /* Use soft carrier on this channel */ + char break_abort; /* Is serial console in, so process brk/abrt */ + char is_cons; /* Is this our console. */ + + /* We need to know the current clock divisor + * to read the bps rate the chip has currently + * loaded. + */ + unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ + int baud; + int magic; + int baud_base; + int port; + int irq; + int flags; /* defined in tty.h */ + int type; /* UART type */ + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int xmit_fifo_size; + int custom_divisor; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; +}; + + +#define SERIAL_MAGIC 0x5301 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#define SERIAL_XMIT_SIZE 4096 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +/* + * Define the number of ports supported and their irqs. + */ +#define NR_PORTS 1 +#define UART_IRQ_DEFNS {UART_IRQ_NUM} + +#endif /* __KERNEL__ */ +#endif /* !(_MC683XX_SERIAL_H) */ diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c new file mode 100644 index 0000000..88b1335 --- /dev/null +++ b/drivers/tty/serial/68360serial.c @@ -0,0 +1,2978 @@ +/* + * UART driver for 68360 CPM SCC or SMC + * Copyright (c) 2000 D. Jeff Dionne , + * Copyright (c) 2000 Michael Leslie + * Copyright (c) 1997 Dan Malek + * + * I used the serial.c driver as the framework for this driver. + * Give credit to those guys. + * The original code was written for the MBX860 board. I tried to make + * it generic, but there may be some assumptions in the structures that + * have to be fixed later. + * To save porting time, I did not bother to change any object names + * that are not accessed outside of this file. + * It still needs lots of work........When it was easy, I included code + * to support the SCCs, but this has never been tested, nor is it complete. + * Only the SCCs support modem control, so that is not complete either. + * + * This module exports the following rs232 io functions: + * + * int rs_360_init(void); + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#ifdef CONFIG_KGDB +extern void breakpoint(void); +extern void set_debug_traps(void); +extern int kgdb_output_string (const char* s, unsigned int count); +#endif + + +/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ +#include +#include + +/* this defines the index into rs_table for the port to use + */ +#ifndef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ +#endif +/* #endif */ + +#if 0 +/* SCC2 for console + */ +#undef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 2 +#endif + + +#define TX_WAKEUP ASYNC_SHARE_IRQ + +static char *serial_name = "CPM UART driver"; +static char *serial_version = "0.03"; + +static struct tty_driver *serial_driver; +int serial_console_setup(struct console *co, char *options); + +/* + * Serial driver configuration section. Here are the various options: + */ +#define SERIAL_PARANOIA_CHECK +#define CONFIG_SERIAL_NOPAUSE_IO +#define SERIAL_DO_RESTART + +/* Set of debugging defines */ + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + +#define _INLINE_ inline + +#define DBG_CNT(s) + +/* We overload some of the items in the data structure to meet our + * needs. For example, the port address is the CPM parameter ram + * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and + * 2 SMCs. The "hub6" field is used to indicate the channel number, with + * a flag indicating SCC or SMC, and the number is used as an index into + * the CPM parameter area for this device. + * The "type" field is currently set to 0, for PORT_UNKNOWN. It is + * not currently used. I should probably use it to indicate the port + * type of SMC or SCC. + * The SMCs do not support any modem control signals. + */ +#define smc_scc_num hub6 +#define NUM_IS_SCC ((int)0x00010000) +#define PORT_NUM(P) ((P) & 0x0000ffff) + + +#if defined (CONFIG_UCQUICC) + +volatile extern void *_periph_base; +/* sipex transceiver + * mode bits for are on pins + * + * SCC2 d16..19 + * SCC3 d20..23 + * SCC4 d24..27 + */ +#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) + +static uint sipex_mode_bits = 0x00000000; + +#endif + +/* There is no `serial_state' defined back here in 2.0. + * Try to get by with serial_struct + */ +/* #define serial_state serial_struct */ + +/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few + * extras: */ + +#if 0 +struct async_icount_24 { + __u32 cts, dsr, rng, dcd, tx, rx; + __u32 frame, parity, overrun, brk; + __u32 buf_overrun; +} icount; +#endif + +#if 0 + +struct serial_state { + int magic; + int baud_base; + unsigned long port; + int irq; + int flags; + int hub6; + int type; + int line; + int revision; /* Chip revision (950) */ + int xmit_fifo_size; + int custom_divisor; + int count; + u8 *iomem_base; + u16 iomem_reg_shift; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + struct async_icount_24 icount; + int io_type; + struct async_struct *info; +}; +#endif + +#define SSTATE_MAGIC 0x5302 + + + +/* SMC2 is sometimes used for low performance TDM interfaces. Define + * this as 1 if you want SMC2 as a serial port UART managed by this driver. + * Define this as 0 if you wish to use SMC2 for something else. + */ +#define USE_SMC2 1 + +#if 0 +/* Define SCC to ttySx mapping. */ +#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ + +/* Define which SCC is the first one to use for a serial port. These + * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used + * for Ethernet, and the first available SCC for serial UART is SCC2. + * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and + * interrupt vectors in the table below to match. + */ +#define SCC_IDX_BASE 1 /* table index */ +#endif + + +/* Processors other than the 860 only get SMCs configured by default. + * Either they don't have SCCs or they are allocated somewhere else. + * Of course, there are now 860s without some SCCs, so we will need to + * address that someday. + * The Embedded Planet Multimedia I/O cards use TDM interfaces to the + * stereo codec parts, and we use SMC2 to help support that. + */ +static struct serial_state rs_table[] = { +/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ + { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ +#if USE_SMC2 + ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ +#endif + +#if defined(CONFIG_SERIAL_68360_SCC) + ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ + ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ + ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ +#endif +}; + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) + +/* The number of buffer descriptors and their sizes. + */ +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define CONSOLE_NUM_FIFO 2 +#define CONSOLE_BUF_SIZE 4 + +char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; + +/* The async_struct in serial.h does not really give us what we + * need, so define our own here. + */ +typedef struct serial_info { + int magic; + int flags; + + struct serial_state *state; + /* struct serial_struct *state; */ + /* struct async_struct *state; */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int line; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int blocked_open; /* # of blocked opens */ + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + +/* CPM Buffer Descriptor pointers. + */ + QUICC_BD *rx_bd_base; + QUICC_BD *rx_cur; + QUICC_BD *tx_bd_base; + QUICC_BD *tx_cur; +} ser_info_t; + + +/* since kmalloc_init() does not get called until much after this initialization: */ +static ser_info_t quicc_ser_info[NR_PORTS]; +static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; +static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; + +static void change_speed(ser_info_t *info); +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); + +static inline int serial_paranoia_check(ser_info_t *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null async_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts, + * indexed by the termio value. The generic CPM functions are responsible + * for setting and assigning baud rate generators for us. + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; + +/* This sucks. There is a better way: */ +#if defined(CONFIG_CONSOLE_9600) + #define CONSOLE_BAUDRATE 9600 +#elif defined(CONFIG_CONSOLE_19200) + #define CONSOLE_BAUDRATE 19200 +#elif defined(CONFIG_CONSOLE_115200) + #define CONSOLE_BAUDRATE 115200 +#else + #warning "console baud rate undefined" + #define CONSOLE_BAUDRATE 9600 +#endif + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_360_stop(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_TX; + } else { + /* smcp = &cpmp->cp_smc[idx]; */ + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_TX; + } + local_irq_restore(flags); +} + + +static void rs_360_start(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm |= UART_SCCM_TX; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm |= SMCM_TX; + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static _INLINE_ void receive_chars(ser_info_t *info) +{ + struct tty_struct *tty = info->port.tty; + unsigned char ch, flag, *cp; + /*int ignored = 0;*/ + int i; + ushort status; + struct async_icount *icount; + /* struct async_icount_24 *icount; */ + volatile QUICC_BD *bdp; + + icount = &info->state->icount; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = info->rx_cur; + for (;;) { + if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ + break; /* we are all done */ + + /* The read status mask tell us what we should do with + * incoming characters, especially if errors occur. + * One special case is the use of BD_SC_EMPTY. If + * this is not set, we are supposed to be ignoring + * inputs. In this case, just mark the buffer empty and + * continue. + */ + if (!(info->read_status_mask & BD_SC_EMPTY)) { + bdp->status |= BD_SC_EMPTY; + bdp->status &= + ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + continue; + } + + /* Get the number of characters and the buffer pointer. + */ + i = bdp->length; + /* cp = (unsigned char *)__va(bdp->buf); */ + cp = (char *)bdp->buf; + status = bdp->status; + + while (i-- > 0) { + ch = *cp++; + icount->rx++; + +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, status); +#endif + flag = TTY_NORMAL; + + if (status & (BD_SC_BR | BD_SC_FR | + BD_SC_PR | BD_SC_OV)) { + /* + * For statistics only + */ + if (status & BD_SC_BR) + icount->brk++; + else if (status & BD_SC_PR) + icount->parity++; + else if (status & BD_SC_FR) + icount->frame++; + if (status & BD_SC_OV) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + if (status & info->ignore_status_mask) { + if (++ignored > 100) + break; + continue; + } + */ + status &= info->read_status_mask; + + if (status & (BD_SC_BR)) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + *tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & BD_SC_PR) + flag = TTY_PARITY; + else if (status & BD_SC_FR) + flag = TTY_FRAME; + } + tty_insert_flip_char(tty, ch, flag); + if (status & BD_SC_OV) + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* This BD is ready to be used again. Clear status. + * Get next BD. + */ + bdp->status |= BD_SC_EMPTY; + bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + } + + info->rx_cur = (QUICC_BD *)bdp; + + tty_schedule_flip(tty); +} + +static _INLINE_ void receive_break(ser_info_t *info) +{ + struct tty_struct *tty = info->port.tty; + + info->state->icount.brk++; + /* Check to see if there is room in the tty buffer for + * the break. If not, we exit now, losing the break. FIXME + */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); +} + +static _INLINE_ void transmit_chars(ser_info_t *info) +{ + + if ((info->flags & TX_WAKEUP) || + (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { + schedule_work(&info->tqueue); + } + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif +} + +#ifdef notdef + /* I need to do this for the SCCs, so it is left as a reminder. + */ +static _INLINE_ void check_modem_status(struct async_struct *info) +{ + int status; + /* struct async_icount *icount; */ + struct async_icount_24 *icount; + + status = serial_in(info, UART_MSR); + + if (status & UART_MSR_ANY_DELTA) { + icount = &info->state->icount; + /* update input line counters */ + if (status & UART_MSR_TERI) + icount->rng++; + if (status & UART_MSR_DDSR) + icount->dsr++; + if (status & UART_MSR_DDCD) { + icount->dcd++; +#ifdef CONFIG_HARD_PPS + if ((info->flags & ASYNC_HARDPPS_CD) && + (status & UART_MSR_DCD)) + hardpps(); +#endif + } + if (status & UART_MSR_DCTS) + icount->cts++; + wake_up_interruptible(&info->delta_msr_wait); + } + + if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttys%d CD now %s...", info->line, + (status & UART_MSR_DCD) ? "on" : "off"); +#endif + if (status & UART_MSR_DCD) + wake_up_interruptible(&info->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("scheduling hangup..."); +#endif + queue_task(&info->tqueue_hangup, + &tq_scheduler); + } + } + if (info->flags & ASYNC_CTS_FLOW) { + if (info->port.tty->hw_stopped) { + if (status & UART_MSR_CTS) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx start..."); +#endif + info->port.tty->hw_stopped = 0; + info->IER |= UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + return; + } + } else { + if (!(status & UART_MSR_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx stop..."); +#endif + info->port.tty->hw_stopped = 1; + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + } + } + } +} +#endif + +/* + * This is the serial driver's interrupt routine for a single port + */ +/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ +static void rs_360_interrupt(int vec, void *dev_id) +{ + u_char events; + int idx; + ser_info_t *info; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + info = dev_id; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + events = sccp->scc_scce; + if (events & SCCM_RX) + receive_chars(info); + if (events & SCCM_TX) + transmit_chars(info); + sccp->scc_scce = events; + } else { + smcp = &pquicc->smc_regs[idx]; + events = smcp->smc_smce; + if (events & SMCM_BRKE) + receive_break(info); + if (events & SMCM_RX) + receive_chars(info); + if (events & SMCM_TX) + transmit_chars(info); + smcp->smc_smce = events; + } + +#ifdef SERIAL_DEBUG_INTR + printk("rs_interrupt_single(%d, %x)...", + info->state->smc_scc_num, events); +#endif +#ifdef modem_control + check_modem_status(info); +#endif + info->last_active = jiffies; +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif +} + + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + + +static void do_softint(void *private_) +{ + ser_info_t *info = (ser_info_t *) private_; + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(void *private_) +{ + struct async_struct *info = (struct async_struct *) private_; + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(ser_info_t *info) +{ + unsigned long flags; + int retval=0; + int idx; + /*struct serial_state *state = info->state;*/ + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *scup; + + + local_irq_save(flags); + + if (info->flags & ASYNC_INITIALIZED) { + goto errout; + } + +#ifdef maybe + if (!state->port || !state->type) { + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + goto errout; + } +#endif + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d (irq %d)...", info->line, state->irq); +#endif + + +#ifdef modem_control + info->MCR = 0; + if (info->port.tty->termios->c_cflag & CBAUD) + info->MCR = UART_MCR_DTR | UART_MCR_RTS; +#endif + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + /* + * and set the speed of the serial port + */ + change_speed(info); + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + scup = &pquicc->pram[info->state->port].scc.pscc.u; + + scup->mrblr = RX_BUF_SIZE; + scup->max_idl = RX_BUF_SIZE; + + sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); + sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Enable interrupts and I/O. + */ + smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); + + /* We can tune the buffer length and idle characters + * to take advantage of the entire incoming buffer size. + * If mrblr is something other than 1, maxidl has to be + * non-zero or we never get an interrupt. The maxidl + * is the number of character times we wait after reception + * of the last character before we decide no more characters + * are coming. + */ + /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ + /* holy unionized structures, Batman: */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + up->mrblr = RX_BUF_SIZE; + up->max_idl = RX_BUF_SIZE; + + up->brkcr = 1; /* number of break chars */ + } + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(ser_info_t *info) +{ + unsigned long flags; + struct serial_state *state; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + state = info->state; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....", info->line, + state->irq); +#endif + + local_irq_save(flags); + + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Disable interrupts and I/O. + */ + smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(ser_info_t *info) +{ + int baud_rate; + unsigned cflag, cval, scval, prev_mode; + int i, bits, sbits, idx; + unsigned long flags; + struct serial_state *state; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info->port.tty || !info->port.tty->termios) + return; + cflag = info->port.tty->termios->c_cflag; + + state = info->state; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: bits = 5; break; + case CS6: bits = 6; break; + case CS7: bits = 7; break; + case CS8: bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: bits = 8; break; + } + sbits = bits - 5; + + if (cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PMSR_SL; + bits++; + } + if (cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PMSR_PEN; + bits++; + } + if (!(cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); + } + + /* Determine divisor based on baud rate */ + i = cflag & CBAUD; + if (i >= (sizeof(baud_table)/sizeof(int))) + baud_rate = 9600; + else + baud_rate = baud_table[i]; + + info->timeout = (TX_BUF_SIZE*HZ*bits); + info->timeout += HZ/50; /* Add .02 seconds of slop */ + +#ifdef modem_control + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + if (info->flags & ASYNC_HARDPPS_CD) + info->IER |= UART_IER_MSI; + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + } else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else { + info->flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + serial_out(info, UART_IER, info->IER); +#endif + + /* + * Set up parity check flag + */ + info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (I_INPCK(info->port.tty)) + info->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + info->read_status_mask &= ~BD_SC_EMPTY; + local_irq_save(flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_psmr = (sbits << 12) | scval; + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = smcp->smc_smcmr; + smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; + smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); + } + + m360_cpm_setbrg((state - rs_table), baud_rate); + + local_irq_restore(flags); +} + +static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_put_char")) + return 0; + + if (!tty) + return 0; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; + return 1; + +} + +static int rs_360_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(buf, count)) + return ret; +#endif + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty) + return 0; + + bdp = info->tx_cur; + + while (1) { + c = min(count, TX_BUF_SIZE); + + if (c <= 0) + break; + + if (bdp->status & BD_SC_READY) { + info->flags |= TX_WAKEUP; + break; + } + + /* memcpy(__va(bdp->buf), buf, c); */ + memcpy((void *)bdp->buf, buf, c); + + bdp->length = c; + bdp->status |= BD_SC_READY; + + buf += c; + count -= c; + ret += c; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + info->tx_cur = (QUICC_BD *)bdp; + } + return ret; +} + +static int rs_360_write_room(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + + if ((info->tx_cur->status & BD_SC_READY) == 0) { + info->flags &= ~TX_WAKEUP; + ret = TX_BUF_SIZE; + } + else { + info->flags |= TX_WAKEUP; + ret = 0; + } + return ret; +} + +/* I could track this with transmit counters....maybe later. +*/ +static int rs_360_chars_in_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return 0; +} + +static void rs_360_flush_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + + /* There is nothing to "flush", whatever we gave the CPM + * is on its way out. + */ + tty_wakeup(tty); + info->flags &= ~TX_WAKEUP; +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_360_send_xchar(struct tty_struct *tty, char ch) +{ + volatile QUICC_BD *bdp; + + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_send_char")) + return; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_360_throttle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + rs_360_send_xchar(tty, STOP_CHAR(tty)); + +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR &= ~UART_MCR_RTS; + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +static void rs_360_unthrottle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_360_send_xchar(tty, START_CHAR(tty)); + } +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR |= UART_MCR_RTS; + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +#ifdef maybe +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct async_struct * info, unsigned int *value) +{ + unsigned char status; + unsigned int result; + + local_irq_disable(); + status = serial_in(info, UART_LSR); + local_irq_enable(); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result,value); +} +#endif + +static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int result = 0; +#ifdef modem_control + unsigned char control, status; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + control = info->MCR; + local_irq_disable(); + status = serial_in(info, UART_MSR); + local_irq_enable(); + result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) + | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) +#ifdef TIOCM_OUT1 + | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) + | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) +#endif + | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) + | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) + | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) + | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +#endif + return result; +} + +static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ +#ifdef modem_control + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int arg; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + /* FIXME: locking on info->mcr */ + if (set & TIOCM_RTS) + info->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->mcr |= UART_MCR_DTR; + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + +#ifdef TIOCM_OUT1 + if (set & TIOCM_OUT1) + info->MCR |= UART_MCR_OUT1; + if (set & TIOCM_OUT2) + info->MCR |= UART_MCR_OUT2; + if (clear & TIOCM_OUT1) + info->MCR &= ~UART_MCR_OUT1; + if (clear & TIOCM_OUT2) + info->MCR &= ~UART_MCR_OUT2; +#endif + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif + return 0; +} + +/* Sending a break is a two step process on the SMC/SCC. It is accomplished + * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT + * command. We take advantage of the begin/end functions to make this + * happen. + */ +static ushort smc_chan_map[] = { + CPM_CR_CH_SMC1, + CPM_CR_CH_SMC2 +}; + +static ushort scc_chan_map[] = { + CPM_CR_CH_SCC1, + CPM_CR_CH_SCC2, + CPM_CR_CH_SCC3, + CPM_CR_CH_SCC4 +}; + +static void begin_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +static void end_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(ser_info_t *info, unsigned int duration) +{ +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); +#endif + begin_break(info); + msleep_interruptible(duration); + end_break(info); +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("done jiffies=%lu\n", jiffies); +#endif +} + + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_360_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct async_icount cnow; + + local_irq_disable(); + cnow = info->state->icount; + local_irq_enable(); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + + return 0; +} + +static int rs_360_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + ser_info_t *info = (ser_info_t *)tty->driver_data; + int retval; + struct async_icount cnow; + /* struct async_icount_24 cnow;*/ /* kernel counter temps */ + struct serial_icounter_struct *p_cuser; /* user space */ + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if (cmd != TIOCMIWAIT) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + if (!arg) { + send_break(info, 250); /* 1/4 second */ + if (signal_pending(current)) + return -EINTR; + } + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + send_break(info, arg ? arg*100 : 250); + if (signal_pending(current)) + return -EINTR; + return 0; + case TIOCSBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + begin_break(info); + return 0; + case TIOCCBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + end_break(info); + return 0; +#ifdef maybe + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); +#endif + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: +#ifdef modem_control + local_irq_disable(); + /* note the counters on entry */ + cprev = info->state->icount; + local_irq_enable(); + while (1) { + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + local_irq_disable(); + cnow = info->state->icount; /* atomic copy */ + local_irq_enable(); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ +#else + return 0; +#endif + + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* FIX UP modem control here someday...... +*/ +static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + change_speed(info); + +#ifdef modem_control + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(tty->termios->c_cflag & CBAUD)) { + info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (tty->termios->c_cflag & CBAUD)) { + info->MCR |= UART_MCR_DTR; + if (!tty->hw_stopped || + !(tty->termios->c_cflag & CRTSCTS)) { + info->MCR |= UART_MCR_RTS; + } + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_360_start(tty); + } +#endif + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_360_close(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + /* struct async_state *state; */ + struct serial_state *state; + unsigned long flags; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + state = info->state; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + DBG_CNT("before DEC-hung"); + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_close ttys%d, count = %d\n", info->line, state->count); +#endif + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk("rs_close: bad serial port count for ttys%d: %d\n", + info->line, state->count); + state->count = 0; + } + if (state->count) { + DBG_CNT("before DEC-2"); + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->read_status_mask &= ~BD_SC_EMPTY; + if (info->flags & ASYNC_INITIALIZED) { + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_RX; + sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_RX; + smcp->smc_smcmr &= ~SMCMR_REN; + } + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_360_wait_until_sent(tty, info->timeout); + } + shutdown(info); + rs_360_flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned long orig_jiffies, char_time; + /*int lsr;*/ + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + +#ifdef maybe + if (info->state->type == PORT_UNKNOWN) + return; +#endif + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = 1; + if (timeout) + char_time = min(char_time, (unsigned long)timeout); +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + + /* We go through the loop at least once because we can't tell + * exactly when the last character exits the shifter. There can + * be at least two characters waiting to be sent after the buffers + * are empty. + */ + do { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...", lsr, jiffies); +#endif +/* current->counter = 0; make us low-priority */ + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && (time_after(jiffies, orig_jiffies + timeout))) + break; + /* The 'tx_cur' is really the next buffer to send. We + * have to back up to the previous BD and wait for it + * to go. This isn't perfect, because all this indicates + * is the buffer is available. There are still characters + * in the CPM FIFO. + */ + bdp = info->tx_cur; + if (bdp == info->tx_bd_base) + bdp += (TX_NUM_FIFO-1); + else + bdp--; + } while (bdp->status & BD_SC_READY); + current->state = TASK_RUNNING; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_360_hangup(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct serial_state *state = info->state; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + state = info->state; + + rs_360_flush_buffer(tty); + shutdown(info); + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + ser_info_t *info) +{ +#ifdef DO_THIS_LATER + DECLARE_WAITQUEUE(wait, current); +#endif + struct serial_state *state = info->state; + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + * If this is an SMC port, we don't have modem control to wait + * for, so just get out here. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR)) || + !(info->state->smc_scc_num & NUM_IS_SCC)) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, state->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; +#ifdef DO_THIS_LATER + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttys%d, count = %d\n", + state->line, state->count); +#endif + local_irq_disable(); + if (!tty_hung_up_p(filp)) + state->count--; + local_irq_enable(); + info->blocked_open++; + while (1) { + local_irq_disable(); + if (tty->termios->c_cflag & CBAUD) + serial_out(info, UART_MCR, + serial_inp(info, UART_MCR) | + (UART_MCR_DTR | UART_MCR_RTS)); + local_irq_enable(); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (serial_in(info, UART_MSR) & + UART_MSR_DCD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + state->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif +#endif /* DO_THIS_LATER */ + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static int get_async_struct(int line, ser_info_t **ret_info) +{ + struct serial_state *sstate; + + sstate = rs_table + line; + if (sstate->info) { + sstate->count++; + *ret_info = (ser_info_t *)sstate->info; + return 0; + } + else { + return -ENOMEM; + } +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_360_open(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + retval = get_async_struct(line, &info); + if (retval) + return retval; + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s, count = %d\n", tty->name, info->state->count); +#endif + tty->driver_data = info; + info->port.tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s successful...", tty->name); +#endif + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, struct serial_state *state) +{ +#ifdef notdef + struct async_struct *info = state->info, scr_info; + char stat_buf[30], control, status; +#endif + int ret; + + ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", + state->line, + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", + (unsigned int)(state->port), state->irq); + + if (!state->port || (state->type == PORT_UNKNOWN)) { + ret += sprintf(buf+ret, "\n"); + return ret; + } + +#ifdef notdef + /* + * Figure out the current RS-232 lines + */ + if (!info) { + info = &scr_info; /* This is just for serial_{in,out} */ + + info->magic = SERIAL_MAGIC; + info->port = state->port; + info->flags = state->flags; + info->quot = 0; + info->port.tty = NULL; + } + local_irq_disable(); + status = serial_in(info, UART_MSR); + control = info ? info->MCR : serial_in(info, UART_MCR); + local_irq_enable(); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (control & UART_MCR_RTS) + strcat(stat_buf, "|RTS"); + if (status & UART_MSR_CTS) + strcat(stat_buf, "|CTS"); + if (control & UART_MCR_DTR) + strcat(stat_buf, "|DTR"); + if (status & UART_MSR_DSR) + strcat(stat_buf, "|DSR"); + if (status & UART_MSR_DCD) + strcat(stat_buf, "|CD"); + if (status & UART_MSR_RI) + strcat(stat_buf, "|RI"); + + if (info->quot) { + ret += sprintf(buf+ret, " baud:%d", + state->baud_base / info->quot); + } + + ret += sprintf(buf+ret, " tx:%d rx:%d", + state->icount.tx, state->icount.rx); + + if (state->icount.frame) + ret += sprintf(buf+ret, " fe:%d", state->icount.frame); + + if (state->icount.parity) + ret += sprintf(buf+ret, " pe:%d", state->icount.parity); + + if (state->icount.brk) + ret += sprintf(buf+ret, " brk:%d", state->icount.brk); + + if (state->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); +#endif + return ret; +} + +int rs_360_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int i, len = 0; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); + for (i = 0; i < NR_PORTS && len < 4000; i++) { + len += line_info(page + len, &rs_table[i]); + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (begin-off); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static _INLINE_ void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); +} + + +/* + * The serial console driver used during boot. Note that these names + * clash with those found in "serial.c", so we currently can't support + * the 16xxx uarts and these at the same time. I will fix this to become + * an indirect function call from tty_io.c (or something). + */ + +#ifdef CONFIG_SERIAL_CONSOLE + +/* + * Print a string to the serial port trying not to disturb any possible + * real use of the port... + */ +static void my_console_write(int idx, const char *s, + unsigned count) +{ + struct serial_state *ser; + ser_info_t *info; + unsigned i; + QUICC_BD *bdp, *bdbase; + volatile struct smc_uart_pram *up; + volatile u_char *cp; + + ser = rs_table + idx; + + + /* If the port has been initialized for general use, we have + * to use the buffer descriptors allocated there. Otherwise, + * we simply use the single buffer allocated. + */ + if ((info = (ser_info_t *)ser->info) != NULL) { + bdp = info->tx_cur; + bdbase = info->tx_bd_base; + } + else { + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + /* Get the address of the host memory buffer. + */ + bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + } + + /* + * We need to gracefully shut down the transmitter, disable + * interrupts, then send our bytes out. + */ + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, s++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while (bdp->status & BD_SC_READY); + + /* Send the character out. + */ + cp = bdp->buf; + *cp = *s; + + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*s == 10) { + while (bdp->status & BD_SC_READY); + /* cp = __va(bdp->buf); */ + cp = bdp->buf; + *cp = 13; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) { + bdp = bdbase; + } + else { + bdp++; + } + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while (bdp->status & BD_SC_READY); + + if (info) + info->tx_cur = (QUICC_BD *)bdp; +} + +static void serial_console_write(struct console *c, const char *s, + unsigned count) +{ +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(s, count)) + return; +#endif + my_console_write(c->index, s, count); +} + + + +/*void console_print_68360(const char *p) +{ + const char *cp = p; + int i; + + for (i=0;cp[i]!=0;i++); + + serial_console_write (p, i); + + //Comment this if you want to have a strict interrupt-driven output + //rs_fair_output(); + + return; +}*/ + + + + + + +#ifdef CONFIG_XMON +int +xmon_360_write(const char *s, unsigned count) +{ + my_console_write(0, s, count); + return(count); +} +#endif + +#ifdef CONFIG_KGDB +void +putDebugChar(char ch) +{ + my_console_write(0, &ch, 1); +} +#endif + +/* + * Receive character from the serial port. This only works well + * before the port is initialized for real use. + */ +static int my_console_wait_key(int idx, int xmon, char *obuf) +{ + struct serial_state *ser; + u_char c, *cp; + ser_info_t *info; + QUICC_BD *bdp; + volatile struct smc_uart_pram *up; + int i; + + ser = rs_table + idx; + + /* Get the address of the host memory buffer. + * If the port has been initialized for general use, we must + * use information from the port structure. + */ + if ((info = (ser_info_t *)ser->info)) + bdp = info->rx_cur; + else + /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ + bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + /* + * We need to gracefully shut down the receiver, disable + * interrupts, then read the input. + * XMON just wants a poll. If no character, return -1, else + * return the character. + */ + if (!xmon) { + while (bdp->status & BD_SC_EMPTY); + } + else { + if (bdp->status & BD_SC_EMPTY) + return -1; + } + + cp = (char *)bdp->buf; + + if (obuf) { + i = c = bdp->length; + while (i-- > 0) + *obuf++ = *cp++; + } + else { + c = *cp; + } + bdp->status |= BD_SC_EMPTY; + + if (info) { + if (bdp->status & BD_SC_WRAP) { + bdp = info->rx_bd_base; + } + else { + bdp++; + } + info->rx_cur = (QUICC_BD *)bdp; + } + + return((int)c); +} + +static int serial_console_wait_key(struct console *co) +{ + return(my_console_wait_key(co->index, 0, NULL)); +} + +#ifdef CONFIG_XMON +int +xmon_360_read_poll(void) +{ + return(my_console_wait_key(0, 1, NULL)); +} + +int +xmon_360_read_char(void) +{ + return(my_console_wait_key(0, 0, NULL)); +} +#endif + +#ifdef CONFIG_KGDB +static char kgdb_buf[RX_BUF_SIZE], *kgdp; +static int kgdb_chars; + +unsigned char +getDebugChar(void) +{ + if (kgdb_chars <= 0) { + kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); + kgdp = kgdb_buf; + } + kgdb_chars--; + + return(*kgdp++); +} + +void kgdb_interruptible(int state) +{ +} +void kgdb_map_scc(void) +{ + struct serial_state *ser; + uint mem_addr; + volatile QUICC_BD *bdp; + volatile smc_uart_t *up; + + cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); + + /* To avoid data cache CPM DMA coherency problems, allocate a + * buffer in the CPM DPRAM. This will work until the CPM and + * serial ports are initialized. At that time a memory buffer + * will be allocated. + * The port is already initialized from the boot procedure, all + * we do here is give it a different buffer and make it a FIFO. + */ + + ser = rs_table; + + /* Right now, assume we are using SMCs. + */ + up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; + + /* Allocate space for an input FIFO, plus a few bytes for output. + * Allocate bytes to maintain word alignment. + */ + mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; + bdp->buf = mem_addr; + + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; + bdp->buf = mem_addr+RX_BUF_SIZE; + + up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ + up->smc_maxidl = RX_BUF_SIZE; +} +#endif + +static struct tty_struct *serial_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .wait_key = serial_console_wait_key, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = CONFIG_SERIAL_CONSOLE_PORT, +}; + + + +/* + * Register console. + */ +long console_360_init(long kmem_start, long kmem_end) +{ + register_console(&sercons); + /*register_console (console_print_68360); - 2.0.38 only required a write + function pointer. */ + return kmem_start; +} + +#endif + +/* Index in baud rate table of the default console baud rate. +*/ +static int baud_idx; + +static const struct tty_operations rs_360_ops = { + .owner = THIS_MODULE, + .open = rs_360_open, + .close = rs_360_close, + .write = rs_360_write, + .put_char = rs_360_put_char, + .write_room = rs_360_write_room, + .chars_in_buffer = rs_360_chars_in_buffer, + .flush_buffer = rs_360_flush_buffer, + .ioctl = rs_360_ioctl, + .throttle = rs_360_throttle, + .unthrottle = rs_360_unthrottle, + /* .send_xchar = rs_360_send_xchar, */ + .set_termios = rs_360_set_termios, + .stop = rs_360_stop, + .start = rs_360_start, + .hangup = rs_360_hangup, + /* .wait_until_sent = rs_360_wait_until_sent, */ + /* .read_proc = rs_360_read_proc, */ + .tiocmget = rs_360_tiocmget, + .tiocmset = rs_360_tiocmset, +}; + +static int __init rs_360_init(void) +{ + struct serial_state * state; + ser_info_t *info; + void *mem_addr; + uint dp_addr, iobits; + int i, j, idx; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct smc_uart_pram *up; + volatile struct scc_regs *scp; + volatile struct uart_pram *sup; + /* volatile immap_t *immap; */ + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -1; + + show_serial_version(); + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + baud_idx | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_360_ops); + + if (tty_register_driver(serial_driver)) + panic("Couldn't register serial driver\n"); + + cp = pquicc; /* Get pointer to Communication Processor */ + /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ + + + /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. + */ + /* The "standard" configuration through the 860. + */ +/* immap->im_ioport.iop_papar |= 0x00fc; */ +/* immap->im_ioport.iop_padir &= ~0x00fc; */ +/* immap->im_ioport.iop_paodr &= ~0x00fc; */ + cp->pio_papar |= 0x00fc; + cp->pio_padir &= ~0x00fc; + /* cp->pio_paodr &= ~0x00fc; */ + + + /* Since we don't yet do modem control, connect the port C pins + * as general purpose I/O. This will assert CTS and CD for the + * SCC ports. + */ + /* FIXME: see 360um p.7-365 and 860um p.34-12 + * I can't make sense of these bits - mleslie*/ +/* immap->im_ioport.iop_pcdir |= 0x03c6; */ +/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ + +/* cp->pio_pcdir |= 0x03c6; */ +/* cp->pio_pcpar &= ~0x03c6; */ + + + + /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and + * BRG4 to SCC3. + */ + cp->si_sicr &= ~0x00ffff00; + cp->si_sicr |= 0x001b1200; + +#ifdef CONFIG_PP04 + /* Frequentis PP04 forced to RS-232 until we know better. + * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. + */ + immap->im_ioport.iop_pcdir |= 0x000c; + immap->im_ioport.iop_pcpar &= ~0x000c; + immap->im_ioport.iop_pcdat &= ~0x000c; + + /* This enables the TX driver. + */ + cp->cp_pbpar &= ~0x6000; + cp->cp_pbdat &= ~0x6000; +#endif + + for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { + state->magic = SSTATE_MAGIC; + state->line = i; + state->type = PORT_UNKNOWN; + state->custom_divisor = 0; + state->close_delay = 5*HZ/10; + state->closing_wait = 30*HZ; + state->icount.cts = state->icount.dsr = + state->icount.rng = state->icount.dcd = 0; + state->icount.rx = state->icount.tx = 0; + state->icount.frame = state->icount.parity = 0; + state->icount.overrun = state->icount.brk = 0; + printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", + i, (unsigned int)(state->irq), + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); + +#ifdef CONFIG_SERIAL_CONSOLE + /* If we just printed the message on the console port, and + * we are about to initialize it for general use, we have + * to wait a couple of character times for the CR/NL to + * make it out of the transmit buffer. + */ + if (i == CONFIG_SERIAL_CONSOLE_PORT) + mdelay(8); + + +/* idx = PORT_NUM(info->state->smc_scc_num); */ +/* if (info->state->smc_scc_num & NUM_IS_SCC) */ +/* chan = scc_chan_map[idx]; */ +/* else */ +/* chan = smc_chan_map[idx]; */ + +/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ +/* while (cp->cp_cr & CPM_CR_FLG); */ + +#endif + /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ + info = &quicc_ser_info[i]; + if (info) { + memset (info, 0, sizeof(ser_info_t)); + info->magic = SERIAL_MAGIC; + info->line = i; + info->flags = state->flags; + INIT_WORK(&info->tqueue, do_softint, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->state = state; + state->info = (struct async_struct *)info; + + /* We need to allocate a transmit and receive buffer + * descriptors from dual port ram, and a character + * buffer area from host mem. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + * (for now this is from a static array of buffers :( + */ + /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ + /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->rx_cur = info->rx_bd_base = bdp; + + /* initialize rx buffer descriptors */ + for (j=0; j<(RX_NUM_FIFO-1); j++) { + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; + mem_addr += RX_BUF_SIZE; + bdp++; + } + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; + + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + +#if defined (CONFIG_UCQUICC) && 1 + /* set the transceiver mode to RS232 */ + sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ + sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); + *(uint *)_periph_base = sipex_mode_bits; + /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ +#endif + } + + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ + /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; + + /* initialize tx buffer descriptors */ + for (j=0; j<(TX_NUM_FIFO-1); j++) { + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = BD_SC_INTRPT; + mem_addr += TX_BUF_SIZE; + bdp++; + } + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); + + if (info->state->smc_scc_num & NUM_IS_SCC) { + scp = &pquicc->scc_regs[idx]; + sup = &pquicc->pram[info->state->port].scc.pscc.u; + sup->rbase = dp_addr; + sup->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + /* execute the INIT RX & TX PARAMS command for this channel. */ + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + } + else { + /* Configure SMCs Tx/Rx instead of port B + * parallel I/O. + */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + up->rbase = dp_addr; + + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (i << ((idx * 16) + 12)); + + up->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + up->mrblr = 1; + up->max_idl = 0; + up->brkcr = 1; + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, + CPM_CR_INIT_TRX) | CPM_CR_FLG; +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + printk(""); +#endif + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Disable all interrupts and clear all pending + * events. + */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; +#endif + } + + /* Install interrupt handler. + */ + /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ + /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ + request_irq(state->irq, rs_360_interrupt, + IRQ_FLG_LOCK, "ttyS", (void *)info); + + /* Set up the baud rate generator. + */ + m360_cpm_setbrg(i, baud_table[baud_idx]); + + } + } + + return 0; +} +module_init(rs_360_init); + +/* This must always be called before the rs_360_init() function, otherwise + * it blows away the port control information. + */ +//static int __init serial_console_setup( struct console *co, char *options) +int serial_console_setup( struct console *co, char *options) +{ + struct serial_state *ser; + uint mem_addr, dp_addr, bidx, idx, iobits; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct scc_regs *scp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *sup; + +/* mleslie TODO: + * add something to the 68k bootloader to store a desired initial console baud rate */ + +/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ +/* bd = (bd_t *)__res; */ + + for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) + /* if (bd->bi_baudrate == baud_table[bidx]) */ + if (CONSOLE_BAUDRATE == baud_table[bidx]) + break; + + /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ + baud_idx = bidx; + + ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; + + cp = pquicc; /* Get pointer to Communication Processor */ + + idx = PORT_NUM(ser->smc_scc_num); + if (ser->smc_scc_num & NUM_IS_SCC) { + + /* TODO: need to set up SCC pin assignment etc. here */ + + } + else { + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (idx << ((idx * 16) + 12)); + } + + /* When we get here, the CPM has been reset, so we need + * to configure the port. + * We need to allocate a transmit and receive buffer descriptor + * from dual port ram, and a character buffer area from host mem. + */ + + /* Allocate space for two buffer descriptors in the DP ram. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); + + /* Allocate space for two 2 byte FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(8); */ + mem_addr = (uint)console_fifos; + + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + bdp->buf = (char *)mem_addr; + (bdp+1)->buf = (char *)(mem_addr+4); + + /* For the receive, set empty and wrap. + * For transmit, set wrap. + */ + bdp->status = BD_SC_EMPTY | BD_SC_WRAP; + (bdp+1)->status = BD_SC_WRAP; + + /* Set up the uart parameters in the parameter ram. + */ + if (ser->smc_scc_num & NUM_IS_SCC) { + scp = &cp->scc_regs[idx]; + /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ + sup = &pquicc->pram[ser->port].scc.pscc.u; + + sup->rbase = dp_addr; + sup->tbase = dp_addr + sizeof(QUICC_BD); + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } + else { + /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + up->rbase = dp_addr; /* Base of receive buffer desc. */ + up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single character interrupts. + */ + up->mrblr = 1; /* receive buffer length */ + up->max_idl = 0; /* wait forever for next char */ + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* And finally, enable Rx and Tx. + */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + } + + /* Set up the baud rate generator. + */ + /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ + m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); + + return 0; +} + +/* + * Local variables: + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c new file mode 100644 index 0000000..b25e6e4 --- /dev/null +++ b/drivers/tty/serial/8250.c @@ -0,0 +1,3377 @@ +/* + * linux/drivers/char/8250.c + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ + +#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#ifdef CONFIG_SPARC +#include "suncore.h" +#endif + +/* + * Configuration: + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +static struct uart_driver serial8250_reg; + +static int serial_index(struct uart_port *port) +{ + return (serial8250_reg.minor - 64) + port->line; +} + +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define CONFIG_SERIAL_DETECT_IRQ 1 +#endif +#ifdef CONFIG_SERIAL_8250_MANY_PORTS +#define CONFIG_SERIAL_MANY_PORTS 1 +#endif + +/* + * HUB6 is always on. This will be removed once the header + * files have been cleaned. + */ +#define CONFIG_HUB6 1 + +#include +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; +}; + +struct irq_info { + struct hlist_node node; + int irq; + spinlock_t lock; /* Protects list not the hash */ + struct list_head *head; +}; + +#define NR_IRQ_HASH 32 /* Can be adjusted later */ +static struct hlist_head irq_lists[NR_IRQ_HASH]; +static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE, + }, + [PORT_RM9000] = { + .name = "RM9000", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, +}; + +#if defined(CONFIG_MIPS_ALCHEMY) + +/* Au1x00 UART hardware has a weird register layout */ +static const u8 au_io_in_map[] = { + [UART_RX] = 0, + [UART_IER] = 2, + [UART_IIR] = 3, + [UART_LCR] = 5, + [UART_MCR] = 6, + [UART_LSR] = 7, + [UART_MSR] = 8, +}; + +static const u8 au_io_out_map[] = { + [UART_TX] = 1, + [UART_IER] = 2, + [UART_FCR] = 4, + [UART_LCR] = 5, + [UART_MCR] = 6, +}; + +/* sane hardware needs no mapping */ +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_in_map[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_out_map[offset]; +} + +#elif defined(CONFIG_SERIAL_8250_RM9K) + +static const u8 + regmap_in[8] = { + [UART_RX] = 0x00, + [UART_IER] = 0x0c, + [UART_IIR] = 0x14, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }, + regmap_out[8] = { + [UART_TX] = 0x04, + [UART_IER] = 0x0c, + [UART_FCR] = 0x18, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }; + +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_in[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_out[offset]; +} + +#else + +/* sane hardware needs no mapping */ +#define map_8250_in_reg(up, offset) (offset) +#define map_8250_out_reg(up, offset) (offset) + +#endif + +static unsigned int hub6_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} + +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readb(p->membase + offset); +} + +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readl(p->membase + offset); +} + +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return __raw_readl(p->membase + offset); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + __raw_writel(value, p->membase + offset); +} + +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = map_8250_in_reg(p, offset) << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} + +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); +} + +/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */ +static inline void dwapb_save_out_value(struct uart_port *p, int offset, + int value) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + + if (offset == UART_LCR) + up->lcr = value; +} + +/* Read the IER to ensure any interrupt is cleared before returning from ISR. */ +static inline void dwapb_check_clear_ier(struct uart_port *p, int offset) +{ + if (offset == UART_TX || offset == UART_IER) + p->serial_in(p, UART_IER); +} + +static void dwapb_serial_out(struct uart_port *p, int offset, int value) +{ + int save_offset = offset; + offset = map_8250_out_reg(p, offset) << p->regshift; + dwapb_save_out_value(p, save_offset, value); + writeb(value, p->membase + offset); + dwapb_check_clear_ier(p, save_offset); +} + +static void dwapb32_serial_out(struct uart_port *p, int offset, int value) +{ + int save_offset = offset; + offset = map_8250_out_reg(p, offset) << p->regshift; + dwapb_save_out_value(p, save_offset, value); + writel(value, p->membase + offset); + dwapb_check_clear_ier(p, save_offset); +} + +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(value, p->iobase + offset); +} + +static void set_io_from_upio(struct uart_port *p) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + switch (p->iotype) { + case UPIO_HUB6: + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; + break; + + case UPIO_MEM: + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; + break; + + case UPIO_RM9000: + case UPIO_MEM32: + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; + break; + + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + break; + + case UPIO_TSI: + p->serial_in = tsi_serial_in; + p->serial_out = tsi_serial_out; + break; + + case UPIO_DWAPB: + p->serial_in = mem_serial_in; + p->serial_out = dwapb_serial_out; + break; + + case UPIO_DWAPB32: + p->serial_in = mem32_serial_in; + p->serial_out = dwapb32_serial_out; + break; + + default: + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; + } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; +} + +static void +serial_out_sync(struct uart_8250_port *up, int offset, int value) +{ + struct uart_port *p = &up->port; + switch (p->iotype) { + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_DWAPB: + case UPIO_DWAPB32: + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ + break; + default: + p->serial_out(p, offset, value); + } +} + +#define serial_in(up, offset) \ + (up->port.serial_in(&(up)->port, (offset))) +#define serial_out(up, offset, value) \ + (up->port.serial_out(&(up)->port, (offset), (value))) +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + +/* Uart divisor latch read */ +static inline int _serial_dl_read(struct uart_8250_port *up) +{ + return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_outp(up, UART_DLL, value & 0xff); + serial_outp(up, UART_DLM, value >> 8 & 0xff); +} + +#if defined(CONFIG_MIPS_ALCHEMY) +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read(struct uart_8250_port *up) +{ + if (up->port.iotype == UPIO_AU) + return __raw_readl(up->port.membase + 0x28); + else + return _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_AU) + __raw_writel(value, up->port.membase + 0x28); + else + _serial_dl_write(up, value); +} +#elif defined(CONFIG_SERIAL_8250_RM9K) +static int serial_dl_read(struct uart_8250_port *up) +{ + return (up->port.iotype == UPIO_RM9000) ? + (((__raw_readl(up->port.membase + 0x10) << 8) | + (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : + _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_RM9000) { + __raw_writel(value, up->port.membase + 0x08); + __raw_writel(value >> 8, up->port.membase + 0x10); + } else { + _serial_dl_write(up, value); + } +} +#else +#define serial_dl_read(up) _serial_dl_read(up) +#define serial_dl_write(up, value) _serial_dl_write(up, value) +#endif + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +/* + * FIFO support. + */ +static void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(p, UART_FCR, 0); + } +} + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, UART_EFR_ECB); + serial_outp(p, UART_LCR, 0); + } + serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, 0); + serial_outp(p, UART_LCR, 0); + } + } +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; + int count; + + old_lcr = serial_inp(up, UART_LCR); + serial_outp(up, UART_LCR, 0); + old_fcr = serial_inp(up, UART_FCR); + old_mcr = serial_inp(up, UART_MCR); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_MCR, UART_MCR_LOOP); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); + serial_outp(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_outp(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_inp(up, UART_RX); + serial_outp(up, UART_FCR, old_fcr); + serial_outp(up, UART_MCR, old_mcr); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_dl_write(up, old_dl); + serial_outp(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_dll, old_dlm, old_lcr; + unsigned int id; + + old_lcr = serial_inp(p, UART_LCR); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); + + old_dll = serial_inp(p, UART_DLL); + old_dlm = serial_inp(p, UART_DLM); + + serial_outp(p, UART_DLL, 0); + serial_outp(p, UART_DLM, 0); + + id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; + + serial_outp(p, UART_DLL, old_dll); + serial_outp(p, UART_DLM, old_dlm); + serial_outp(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + if (serial_in(up, UART_EFR) == 0) { + serial_outp(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_outp(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + */ + serial_outp(up, UART_LCR, 0); + status1 = serial_in(up, UART_MCR); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { + unsigned short quot; + + serial_outp(up, UART_LCR, 0xE0); + + quot = serial_dl_read(up); + quot <<= 3; + + status1 = serial_in(up, 0x04); /* EXCR2 */ + status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status1); + + serial_dl_write(up, quot); + + serial_outp(up, UART_LCR, 0); + + up->port.uartclk = 921600*16; + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_outp(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_outp(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", + serial_index(&up->port), up->port.iobase, up->port.membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&up->port.lock, flags); + + up->capabilities = 0; + up->bugs = 0; + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) { + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if it's 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, 0); + serial_outp(up, UART_LCR, 0); + + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + + DEBUG_AUTOCONF("iir=%d ", scratch); + + switch (scratch) { + case 0: + autoconfig_8250(up); + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + int i; + + for (i = 0 ; i < probe_rsa_count; ++i) { + if (probe_rsa[i] == up->port.iobase && + __enable_rsa(up)) { + up->port.type = PORT_RSA; + break; + } + } + } +#endif + + serial_outp(up, UART_LCR, save_lcr); + + if (up->capabilities != uart_config[up->port.type].flags) { + printk(KERN_WARNING + "ttyS%d: detected caps %08x should be %08x\n", + serial_index(&up->port), up->capabilities, + uart_config[up->port.type].flags); + } + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[up->port.type].flags; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + + if (up->port.type == PORT_UNKNOWN) + goto out; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial8250_clear_fifos(up); + serial_in(up, UART_RX); + if (up->capabilities & UART_CAP_UUE) + serial_outp(up, UART_IER, UART_IER_UUE); + else + serial_outp(up, UART_IER, 0); + + out: + spin_unlock_irqrestore(&up->port.lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (up->port.flags & UPF_FOURPORT) { + ICP = (up->port.iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + (void) inb_p(ICP); + } + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_inp(up, UART_MCR); + save_ier = serial_inp(up, UART_IER); + serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_outp(up, UART_MCR, 0); + udelay(10); + if (up->port.flags & UPF_FOURPORT) { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS); + } else { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ + (void)serial_inp(up, UART_LSR); + (void)serial_inp(up, UART_RX); + (void)serial_inp(up, UART_IIR); + (void)serial_inp(up, UART_MSR); + serial_outp(up, UART_TX, 0xFF); + udelay(20); + irq = probe_irq_off(irqs); + + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_IER, save_ier); + + if (up->port.flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + up->port.irq = (irq > 0) ? irq : 0; +} + +static inline void __stop_tx(struct uart_8250_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void serial8250_stop_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void transmit_chars(struct uart_8250_port *up); + +static void serial8250_start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + + if (up->bugs & UART_BUG_TXEN) { + unsigned char lsr; + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((up->port.type == PORT_RM9000) ? + (lsr & UART_LSR_THRE) : + (lsr & UART_LSR_TEMT)) + transmit_chars(up); + } + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void +receive_chars(struct uart_8250_port *up, unsigned int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch, lsr = *status; + int max_count = 256; + char flag; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_inp(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + + flag = TTY_NORMAL; + up->port.icount.rx++; + + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) + up->port.icount.parity++; + else if (lsr & UART_LSR_FE) + up->port.icount.frame++; + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + + if (lsr & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + +ignore_char: + lsr = serial_inp(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + *status = lsr; +} + +static void transmit_chars(struct uart_8250_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + serial8250_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} + +static unsigned int check_modem_status(struct uart_8250_port *up) +{ + unsigned int status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +/* + * This handles the interrupt from one port. + */ +static void serial8250_handle_port(struct uart_8250_port *up) +{ + unsigned int status; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + status = serial_inp(up, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & (UART_LSR_DR | UART_LSR_BI)) + receive_chars(up, &status); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + unsigned int iir; + + up = list_entry(l, struct uart_8250_port, list); + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + serial8250_handle_port(up); + + handled = 1; + + end = NULL; + } else if ((up->port.iotype == UPIO_DWAPB || + up->port.iotype == UPIO_DWAPB32) && + (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* The DesignWare APB UART has an Busy Detect (0x07) + * interrupt meaning an LCR write attempt occured while the + * UART was busy. The interrupt must be cleared by reading + * the UART status register (USR) and the LCR re-written. */ + unsigned int status; + status = *(volatile u32 *)up->port.private_data; + serial_out(up, UART_LCR, up->lcr); + + handled = 1; + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk_ratelimited(KERN_ERR + "serial8250: too much work for irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + spin_unlock_irq(&i->lock); + /* List empty so throw away the hash node */ + if (i->head == NULL) { + hlist_del(&i->node); + kfree(i); + } +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct hlist_head *h; + struct hlist_node *n; + struct irq_info *i; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + if (n == NULL) { + i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); + if (i == NULL) { + mutex_unlock(&hash_mutex); + return -ENOMEM; + } + spin_lock_init(&i->lock); + i->irq = up->port.irq; + hlist_add_head(&i->node, h); + } + mutex_unlock(&hash_mutex); + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + irq_flags |= up->port.irqflags; + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i; + struct hlist_node *n; + struct hlist_head *h; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + BUG_ON(n == NULL); + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); + mutex_unlock(&hash_mutex); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir; + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) + serial8250_handle_port(up); + mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); +} + +static void serial8250_backup_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir, ier = 0, lsr; + unsigned long flags; + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (is_real_interrupt(up->port.irq)) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } + + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (lsr & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_handle_port(up); + + if (is_real_interrupt(up->port.irq)) + serial_out(up, UART_IER, ier); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, + jiffies + uart_poll_timeout(&up->port) + HZ / 5); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned int lsr; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); + + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned int status; + unsigned int ret; + + status = check_modem_status(up); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = serial_in(up, UART_LSR); + + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char lsr = serial_inp(up, UART_LSR); + + if (!(lsr & UART_LSR_DR)) + return NO_POLL_CHAR; + + return serial_inp(up, UART_RX); +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned char lsr, iir; + int retval; + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + up->capabilities = uart_config[up->port.type].flags; + up->mcr = 0; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", + serial_index(&up->port)); + return -ENODEV; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (up->port.type == PORT_16850) { + unsigned char fctr; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + + fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_outp(up, UART_TRG, UART_TRG_96); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_outp(up, UART_TRG, UART_TRG_96); + + serial_outp(up, UART_LCR, 0); + } + + if (is_real_interrupt(up->port.irq)) { + unsigned char iir1; + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.irqflags & IRQF_SHARED) + disable_irq_nosync(up->port.irq); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + iir1 = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + + if (up->port.irqflags & IRQF_SHARED) + enable_irq(up->port.irq); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * If the interrupt is not reasserted, setup a timer to + * kick the UART on a regular basis. + */ + if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + up->bugs |= UART_BUG_THRE; + pr_debug("ttyS%d - using backup timer\n", + serial_index(port)); + } + } + + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + uart_poll_timeout(port) + HZ / 5); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + + /* + * Do a quick test to see if we receive an + * interrupt when we enable the TX irq. + */ + serial_outp(up, UART_IER, UART_IER_THRI); + lsr = serial_in(up, UART_LSR); + iir = serial_in(up, UART_IIR); + serial_outp(up, UART_IER, 0); + + if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { + if (!(up->bugs & UART_BUG_TXEN)) { + up->bugs |= UART_BUG_TXEN; + pr_debug("ttyS%d - enabling bad tx status workarounds\n", + serial_index(port)); + } + } else { + up->bugs &= ~UART_BUG_TXEN; + } + +dont_test_tx_en: + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_inp(up, UART_LSR); + serial_inp(up, UART_RX); + serial_inp(up, UART_IIR); + serial_inp(up, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + return 0; +} + +static void serial8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + (void) serial_in(up, UART_RX); + + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (is_real_interrupt(up->port.irq)) + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = uart_get_divisor(port, baud); + + return quot; +} + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(port, baud); + + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + + if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = uart_config[up->port.type].fcr; + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. In the case where + * the remote UART is not using CTS auto flow control, we must + * have sufficient FIFO entries for the latency of the remote + * UART to respond. IOW, at least 32 bytes of FIFO. + */ + if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (!(up->bugs & UART_BUG_NOMSR) && + UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE | UART_IER_RTOIE; + + serial_out(up, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, efr); + } + +#ifdef CONFIG_ARCH_OMAP + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port(up)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + + if (up->capabilities & UART_NATSEMI) { + /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ + serial_outp(up, UART_LCR, 0xe0); + } else { + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + } + + serial_dl_write(up, quot); + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); + + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} + +static void +serial8250_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + serial8250_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + + +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = + container_of(port, struct uart_8250_port, port); + + serial8250_set_sleep(p, state != 0); +} +EXPORT_SYMBOL(serial8250_do_pm); + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + if (port->pm) + port->pm(port, state, oldstate); + else + serial8250_do_pm(port, state, oldstate); +} + +static unsigned int serial8250_port_size(struct uart_8250_port *pt) +{ + if (pt->port.iotype == UPIO_AU) + return 0x1000; +#ifdef CONFIG_ARCH_OMAP + if (is_omap_port(pt)) + return 0x16 << pt->port.regshift; +#endif + return 8 << pt->port.regshift; +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + int ret = 0; + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + case UPIO_DWAPB: + case UPIO_DWAPB32: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap_nocache(up->port.mapbase, + size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + case UPIO_DWAPB: + case UPIO_DWAPB32: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + int ret = -EINVAL; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += up->port.iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase + offset, size); + break; + } +} + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + serial8250_release_std_resource(up); + if (up->port.type == PORT_RSA) + serial8250_release_rsa_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int ret = 0; + + ret = serial8250_request_std_resource(up); + if (ret == 0 && up->port.type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + serial8250_release_std_resource(up); + } + + return ret; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int probeflags = PROBE_ANY; + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + probeflags &= ~PROBE_RSA; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (flags & UART_CONFIG_TYPE) + autoconfig(up, probeflags); + + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; + + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + serial8250_release_rsa_resource(up); + if (up->port.type == PORT_UNKNOWN) + serial8250_release_std_resource(up); +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +static void (*serial8250_isa_config)(int port, struct uart_port *up, + unsigned short *capabilities); + +void serial8250_set_isa_configurator( + void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.line = i; + spin_lock_init(&up->port.lock); + + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + up->port.ops = &serial8250_pops; + } + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.irqflags = old_serial_port[i].irqflags; + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.hub6 = old_serial_port[i].hub6; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(&up->port); + up->port.irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + + } +} + +static void +serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) +{ + up->port.type = type; + up->port.fifosize = uart_config[type].fifo_size; + up->capabilities = uart_config[type].flags; + up->tx_loadsz = uart_config[type].tx_loadsz; +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + + serial8250_isa_init_ports(); + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.dev = dev; + + if (up->port.flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(up, up->port.type); + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial8250_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial8250_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); + + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init serial8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= nr_uarts) + co->index = 0; + port = &serial8250_ports[co->index].port; + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int serial8250_console_early_setup(void) +{ + return serial8250_find_port_for_earlycon(); +} + +static struct console serial8250_console = { + .name = "ttyS", + .write = serial8250_console_write, + .device = uart_console_device, + .setup = serial8250_console_setup, + .early_setup = serial8250_console_early_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init serial8250_console_init(void) +{ + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + serial8250_isa_init_ports(); + register_console(&serial8250_console); + return 0; +} +console_initcall(serial8250_console_init); + +int serial8250_find_port(struct uart_port *p) +{ + int line; + struct uart_port *port; + + for (line = 0; line < nr_uarts; line++) { + port = &serial8250_ports[line].port; + if (uart_match_port(p, port)) + return line; + } + return -ENODEV; +} + +#define SERIAL8250_CONSOLE &serial8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .cons = SERIAL8250_CONSOLE, +}; + +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ +int __init early_serial_setup(struct uart_port *port) +{ + struct uart_port *p; + + if (port->line >= ARRAY_SIZE(serial8250_ports)) + return -ENODEV; + + serial8250_isa_init_ports(); + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->irqflags = port->irqflags; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->private_data = port->private_data; + p->type = port->type; + p->line = port->line; + + set_io_from_upio(p); + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + + if (up->capabilities & UART_NATSEMI) { + unsigned char tmp; + + /* Ensure it's still in high speed mode */ + serial_outp(up, UART_LCR, 0xE0); + + tmp = serial_in(up, 0x04); /* EXCR2 */ + tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, tmp); + + serial_outp(up, UART_LCR, 0); + } + uart_resume_port(&serial8250_reg, &up->port); +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int __devinit serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i, irqflag = 0; + + memset(&port, 0, sizeof(struct uart_port)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.irqflags = p->irqflags; + port.uartclk = p->uartclk; + port.regshift = p->regshift; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.hub6 = p->hub6; + port.private_data = p->private_data; + port.type = p->type; + port.serial_in = p->serial_in; + port.serial_out = p->serial_out; + port.set_termios = p->set_termios; + port.pm = p->pm; + port.dev = &dev->dev; + port.irqflags |= irqflag; + ret = serial8250_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove = __devexit_p(serial8250_remove), + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + .owner = THIS_MODULE, + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DEFINE_MUTEX(serial_mutex); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < nr_uarts; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +/** + * serial8250_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_port(struct uart_port *port) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (port->uartclk == 0) + return -EINVAL; + + mutex_lock(&serial_mutex); + + uart = serial8250_find_match_or_unused(port); + if (uart) { + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.irqflags = port->irqflags; + uart->port.uartclk = port->uartclk; + uart->port.fifosize = port->fifosize; + uart->port.regshift = port->regshift; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; + uart->port.mapbase = port->mapbase; + uart->port.private_data = port->private_data; + if (port->dev) + uart->port.dev = port->dev; + + if (port->flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(uart, port->type); + + set_io_from_upio(&uart->port); + /* Possibly override default I/O functions. */ + if (port->serial_in) + uart->port.serial_in = port->serial_in; + if (port->serial_out) + uart->port.serial_out = port->serial_out; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; + if (port->pm) + uart->port.pm = port->pm; + + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_mutex); + + return ret; +} +EXPORT_SYMBOL(serial8250_register_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + mutex_lock(&serial_mutex); + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + mutex_unlock(&serial_mutex); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + printk(KERN_INFO "Serial: 8250/16550 driver, " + "%d ports, IRQ sharing %sabled\n", nr_uarts, + share_irqs ? "en" : "dis"); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); + +module_param(share_irqs, uint, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" + " (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h new file mode 100644 index 0000000..6e19ea3 --- /dev/null +++ b/drivers/tty/serial/8250.h @@ -0,0 +1,80 @@ +/* + * linux/drivers/char/8250.h + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char hub6; + unsigned char io_type; + unsigned char *iomem_base; + unsigned short iomem_reg_shift; + unsigned long irqflags; +}; + +/* + * This replaces serial_uart_config in include/linux/serial.h + */ +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ + +#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#elif defined(CONFIG_SBC8560) +/* + * WindRiver did something similarly broken on their SBC8560 board. The + * UART tristates its IRQ output while OUT2 is clear, but they pulled + * the interrupt line _up_ instead of down, so if we register the IRQ + * while the UART is in that state, we die in an IRQ storm. */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250_accent.c new file mode 100644 index 0000000..9c10262 --- /dev/null +++ b/drivers/tty/serial/8250_accent.c @@ -0,0 +1,47 @@ +/* + * linux/drivers/serial/8250_accent.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port accent_data[] = { + PORT(0x330, 4), + PORT(0x338, 4), + { }, +}; + +static struct platform_device accent_device = { + .name = "serial8250", + .id = PLAT8250_DEV_ACCENT, + .dev = { + .platform_data = accent_data, + }, +}; + +static int __init accent_init(void) +{ + return platform_device_register(&accent_device); +} + +module_init(accent_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250_acorn.c new file mode 100644 index 0000000..b0ce8c5 --- /dev/null +++ b/drivers/tty/serial/8250_acorn.c @@ -0,0 +1,141 @@ +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; + void __iomem *vaddr; +}; + +static int __devinit +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_port port; + unsigned long bus_addr; + unsigned int i; + + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + info->vaddr = ecardm_iomap(ec, type->type, 0, 0); + if (!info->vaddr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&port, 0, sizeof(struct uart_port)); + port.irq = ec->irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + port.uartclk = type->uartclk; + port.iotype = UPIO_MEM; + port.regshift = 2; + port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i ++) { + port.membase = info->vaddr + type->offset[i]; + port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_port(&port); + } + + return 0; +} + +static void __devexit serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = __devexit_p(serial_card_remove), + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250_boca.c new file mode 100644 index 0000000..3bfe0f7 --- /dev/null +++ b/drivers/tty/serial/8250_boca.c @@ -0,0 +1,61 @@ +/* + * linux/drivers/serial/8250_boca.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port boca_data[] = { + PORT(0x100, 12), + PORT(0x108, 12), + PORT(0x110, 12), + PORT(0x118, 12), + PORT(0x120, 12), + PORT(0x128, 12), + PORT(0x130, 12), + PORT(0x138, 12), + PORT(0x140, 12), + PORT(0x148, 12), + PORT(0x150, 12), + PORT(0x158, 12), + PORT(0x160, 12), + PORT(0x168, 12), + PORT(0x170, 12), + PORT(0x178, 12), + { }, +}; + +static struct platform_device boca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_BOCA, + .dev = { + .platform_data = boca_data, + }, +}; + +static int __init boca_init(void) +{ + return platform_device_register(&boca_device); +} + +module_init(boca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250_early.c new file mode 100644 index 0000000..eaafb98 --- /dev/null +++ b/drivers/tty/serial/8250_early.c @@ -0,0 +1,287 @@ +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_FIX_EARLYCON_MEM +#include +#include +#endif + +struct early_serial8250_device { + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; + +static struct early_serial8250_device early_device; + +static unsigned int __init serial_in(struct uart_port *port, int offset) +{ + switch (port->iotype) { + case UPIO_MEM: + return readb(port->membase + offset); + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: + return inb(port->iobase + offset); + default: + return 0; + } +} + +static void __init serial_out(struct uart_port *port, int offset, int value) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb(value, port->membase + offset); + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: + outb(value, port->iobase + offset); + break; + } +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __init wait_for_xmitr(struct uart_port *port) +{ + unsigned int status; + + for (;;) { + status = serial_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + return; + cpu_relax(); + } +} + +static void __init serial_putc(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + serial_out(port, UART_TX, c); +} + +static void __init early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct uart_port *port = &early_device.port; + unsigned int ier; + + /* Save the IER and disable interrupts */ + ier = serial_in(port, UART_IER); + serial_out(port, UART_IER, 0); + + uart_console_write(port, s, count, serial_putc); + + /* Wait for transmitter to become empty and restore the IER */ + wait_for_xmitr(port); + serial_out(port, UART_IER, ier); +} + +static unsigned int __init probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_in(port, UART_DLL); + dlm = serial_in(port, UART_DLM); + serial_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +static void __init init_port(struct early_serial8250_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + + serial_out(port, UART_LCR, 0x3); /* 8n1 */ + serial_out(port, UART_IER, 0); /* no interrupt */ + serial_out(port, UART_FCR, 0); /* no fifo */ + serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = port->uartclk / (16 * device->baud); + c = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, c | UART_LCR_DLAB); + serial_out(port, UART_DLL, divisor & 0xff); + serial_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); +} + +static int __init parse_options(struct early_serial8250_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length; + + if (!options) + return -ENODEV; + + port->uartclk = BASE_BAUD * 16; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + port->mapbase & PAGE_MASK); + port->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + port->membase += port->mapbase & ~PAGE_MASK; +#else + port->membase = ioremap_nocache(port->mapbase, 64); + if (!port->membase) { + printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", + __func__, + (unsigned long long) port->mapbase); + return -ENOMEM; + } +#endif + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + port->iobase = simple_strtoul(options + 3, &options, 0); + mmio = 0; + } else + return -EINVAL; + + options = strchr(options, ','); + if (options) { + options++; + device->baud = simple_strtoul(options, NULL, 0); + length = min(strcspn(options, " "), sizeof(device->options)); + strncpy(device->options, options, length); + } else { + device->baud = probe_baud(port); + snprintf(device->options, sizeof(device->options), "%u", + device->baud); + } + + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +static struct console early_serial8250_console __initdata = { + .name = "uart", + .write = early_serial8250_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static int __init early_serial8250_setup(char *options) +{ + struct early_serial8250_device *device = &early_device; + int err; + + if (device->port.membase || device->port.iobase) + return 0; + + err = parse_options(device, options); + if (err < 0) + return err; + + init_port(device); + return 0; +} + +int __init setup_early_serial8250_console(char *cmdline) +{ + char *options; + int err; + + options = strstr(cmdline, "uart8250,"); + if (!options) { + options = strstr(cmdline, "uart,"); + if (!options) + return 0; + } + + options = strchr(cmdline, ',') + 1; + err = early_serial8250_setup(options); + if (err < 0) + return err; + + register_console(&early_serial8250_console); + + return 0; +} + +int serial8250_find_port_for_earlycon(void) +{ + struct early_serial8250_device *device = &early_device; + struct uart_port *port = &device->port; + int line; + int ret; + + if (!device->port.membase && !device->port.iobase) + return -ENODEV; + + line = serial8250_find_port(port); + if (line < 0) + return -ENODEV; + + ret = update_console_cmdline("uart", 8250, + "ttyS", line, device->options); + if (ret < 0) + ret = update_console_cmdline("uart", 0, + "ttyS", line, device->options); + + return ret; +} + +early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250_exar_st16c554.c new file mode 100644 index 0000000..567143a --- /dev/null +++ b/drivers/tty/serial/8250_exar_st16c554.c @@ -0,0 +1,52 @@ +/* + * linux/drivers/serial/8250_exar.c + * + * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > + * Based on 8250_boca. + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port exar_data[] = { + PORT(0x100, 5), + PORT(0x108, 5), + PORT(0x110, 5), + PORT(0x118, 5), + { }, +}; + +static struct platform_device exar_device = { + .name = "serial8250", + .id = PLAT8250_DEV_EXAR_ST16C554, + .dev = { + .platform_data = exar_data, + }, +}; + +static int __init exar_init(void) +{ + return platform_device_register(&exar_device); +} + +module_init(exar_init); + +MODULE_AUTHOR("Paul B Schroeder"); +MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250_fourport.c new file mode 100644 index 0000000..6375d68 --- /dev/null +++ b/drivers/tty/serial/8250_fourport.c @@ -0,0 +1,53 @@ +/* + * linux/drivers/serial/8250_fourport.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ + } + +static struct plat_serial8250_port fourport_data[] = { + PORT(0x1a0, 9), + PORT(0x1a8, 9), + PORT(0x1b0, 9), + PORT(0x1b8, 9), + PORT(0x2a0, 5), + PORT(0x2a8, 5), + PORT(0x2b0, 5), + PORT(0x2b8, 5), + { }, +}; + +static struct platform_device fourport_device = { + .name = "serial8250", + .id = PLAT8250_DEV_FOURPORT, + .dev = { + .platform_data = fourport_data, + }, +}; + +static int __init fourport_init(void) +{ + return platform_device_register(&fourport_device); +} + +module_init(fourport_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250_gsc.c new file mode 100644 index 0000000..d8c0ffb --- /dev/null +++ b/drivers/tty/serial/8250_gsc.c @@ -0,0 +1,122 @@ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox 2001-2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +static int __init serial_init_chip(struct parisc_device *dev) +{ + struct uart_port port; + unsigned long address; + int err; + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) + printk(KERN_INFO + "Serial: device 0x%llx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", + (unsigned long long)dev->hpa.start); + return -ENODEV; + } + + address = dev->hpa.start; + if (dev->id.sversion != 0x8d) + address += 0x800; + + memset(&port, 0, sizeof(port)); + port.iotype = UPIO_MEM; + /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ + port.uartclk = 7272727; + port.mapbase = address; + port.membase = ioremap_nocache(address, 16); + port.irq = dev->irq; + port.flags = UPF_BOOT_AUTOCONF; + port.dev = &dev->dev; + + err = serial8250_register_port(&port); + if (err < 0) { + printk(KERN_WARNING + "serial8250_register_port returned error %d\n", err); + iounmap(port.membase); + return err; + } + + return 0; +} + +static struct parisc_device_id serial_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static struct parisc_device_id lasi_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +static int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250_hp300.c new file mode 100644 index 0000000..c13438c --- /dev/null +++ b/drivers/tty/serial/8250_hp300.c @@ -0,0 +1,327 @@ +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong , May 2004. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) +#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port +{ + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void __devexit hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = __devexit_p(hpdca_remove_one), +}; + +#endif + +static unsigned int num_ports; + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + * This function should be called before serial_console_init() is called + * to make sure the serial console will be available for use. IA-64 kernel + * calls this function from setup_arch() after the EFI and ACPI tables have + * been parsed. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + printk(KERN_INFO "Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) + return 0; + + printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) + printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct uart_port port; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&port, 0, sizeof(struct uart_port)); + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.irq = d->ipl; + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (d->resource.start + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.dev = &d->dev; + line = serial8250_register_port(&port); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" + " irq %d failed\n", d->scode, port.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + num_ports++; + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct uart_port uport; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + +#ifdef CONFIG_HPDCA + dio_register_driver(&hpdca_driver); +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's + * mapped to DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) + continue; +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&uport, 0, sizeof(struct uart_port)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + uport.iotype = UPIO_MEM; + uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ + | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + uport.irq = 0; + uport.uartclk = HPAPCI_BAUD_BASE * 16; + uport.mapbase = base; + uport.membase = (char *)(base + DIO_VIRADDRBASE); + uport.regshift = 2; + + line = serial8250_register_port(&uport); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() APCI" + " %d irq %d failed\n", i, uport.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void __devexit hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + serial8250_unregister_port(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + serial8250_unregister_port(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong "); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250_hub6.c new file mode 100644 index 0000000..7609150 --- /dev/null +++ b/drivers/tty/serial/8250_hub6.c @@ -0,0 +1,58 @@ +/* + * linux/drivers/serial/8250_hub6.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define HUB6(card,port) \ + { \ + .iobase = 0x302, \ + .irq = 3, \ + .uartclk = 1843200, \ + .iotype = UPIO_HUB6, \ + .flags = UPF_BOOT_AUTOCONF, \ + .hub6 = (card) << 6 | (port) << 3 | 1, \ + } + +static struct plat_serial8250_port hub6_data[] = { + HUB6(0, 0), + HUB6(0, 1), + HUB6(0, 2), + HUB6(0, 3), + HUB6(0, 4), + HUB6(0, 5), + HUB6(1, 0), + HUB6(1, 1), + HUB6(1, 2), + HUB6(1, 3), + HUB6(1, 4), + HUB6(1, 5), + { }, +}; + +static struct platform_device hub6_device = { + .name = "serial8250", + .id = PLAT8250_DEV_HUB6, + .dev = { + .platform_data = hub6_data, + }, +}; + +static int __init hub6_init(void) +{ + return platform_device_register(&hub6_device); +} + +module_init(hub6_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250_mca.c new file mode 100644 index 0000000..d10be94 --- /dev/null +++ b/drivers/tty/serial/8250_mca.c @@ -0,0 +1,63 @@ +/* + * linux/drivers/serial/8250_mca.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +/* + * FIXME: Should we be doing AUTO_IRQ here? + */ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ +#else +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST +#endif + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = MCA_FLAGS, \ + } + +static struct plat_serial8250_port mca_data[] = { + PORT(0x3220, 3), + PORT(0x3228, 3), + PORT(0x4220, 3), + PORT(0x4228, 3), + PORT(0x5220, 3), + PORT(0x5228, 3), + { }, +}; + +static struct platform_device mca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_MCA, + .dev = { + .platform_data = mca_data, + }, +}; + +static int __init mca_init(void) +{ + if (!MCA_bus) + return -ENODEV; + return platform_device_register(&mca_device); +} + +module_init(mca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for MCA ports"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c new file mode 100644 index 0000000..8b8930f --- /dev/null +++ b/drivers/tty/serial/8250_pci.c @@ -0,0 +1,3850 @@ +/* + * linux/drivers/char/8250_pci.c + * + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#undef SERIAL_DEBUG_PCI + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*init)(struct pci_dev *dev); + int (*setup)(struct serial_private *, + const struct pciserial_board *, + struct uart_port *, int); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + struct pci_dev *dev; + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static void moan_device(const char *str, struct pci_dev *dev) +{ + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct serial_private *priv, struct uart_port *port, + int bar, int offset, int regshift) +{ + struct pci_dev *dev = priv->dev; + unsigned long base, len; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + base = pci_resource_start(dev, bar); + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + len = pci_resource_len(dev, bar); + + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = ioremap_nocache(base, len); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->iotype = UPIO_MEM; + port->iobase = 0; + port->mapbase = base + offset; + port->membase = priv->remapped_bar[bar] + offset; + port->regshift = regshift; + } else { + port->iotype = UPIO_PORT; + port->iobase = base + offset; + port->mapbase = 0; + port->membase = NULL; + port->regshift = 0; + } + return 0; +} + +/* + * ADDI-DATA GmbH communication cards + */ +static int addidata_apci7800_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + bar = FL_GET_BASE(board->flags); + + if (idx < 2) { + offset += idx * board->uart_offset; + } else if ((idx >= 2) && (idx < 4)) { + bar += 1; + offset += ((idx - 2) * board->uart_offset); + } else if ((idx >= 4) && (idx < 6)) { + bar += 2; + offset += ((idx - 4) * board->uart_offset); + } else if (idx >= 6) { + bar += 3; + offset += ((idx - 6) * board->uart_offset); + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (priv->dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int pci_inteli960ni_init(struct pci_dev *dev) +{ + unsigned long oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, (void *)&oldval); + if (oldval == 0x00001000L) { /* RESET value */ + printk(KERN_DEBUG "Local i960 firmware missing"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) + irq_config = 0x43; + + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + /* + * enable/disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void __devexit pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +#define NI8420_INT_ENABLE_REG 0x38 +#define NI8420_INT_ENABLE_BIT 0x2000 + +static void __devexit pci_ni8420_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), + p + NI8420_INT_ENABLE_REG); + iounmap(p); +} + + +/* MITE registers */ +#define MITE_IOWBSR1 0xc4 +#define MITE_IOWCR1 0xf4 +#define MITE_LCIMR1 0x08 +#define MITE_LCIMR2 0x10 + +#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) + +static void __devexit pci_ni8430_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); + iounmap(p); +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10, p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0, p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void __devexit sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) + writeb(0, p + OCT_REG_CR_OFF); + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equiped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin , 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + +static int pci_siig_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; + + if (idx > 3) { + bar = 4; + offset = (idx - 4) * 8; + } + + return setup_port(priv, port, bar, offset, 0); +} + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static const unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static const unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static const unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static const unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static const struct timedia_struct { + int num; + const unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port } +}; + +static int pci_timedia_init(struct pci_dev *dev) +{ + const unsigned short *ids; + int i, j; + + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + /* FALLTHROUGH */ + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int pci_ni8420_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Enable CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, + p + NI8420_INT_ENABLE_REG); + + iounmap(p); + return 0; +} + +#define MITE_IOWBSR1_WSIZE 0xa +#define MITE_IOWBSR1_WIN_OFFSET 0x800 +#define MITE_IOWBSR1_WENAB (1 << 7) +#define MITE_LCIMR1_IO_IE_0 (1 << 24) +#define MITE_LCIMR2_SET_CPU_IE (1 << 31) +#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe + +static int pci_ni8430_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + u32 device_window; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Set device window address and size in BAR0 */ + device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) + | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; + writel(device_window, p + MITE_IOWBSR1); + + /* Set window access to go to RAMSEL IO address space */ + writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), + p + MITE_IOWCR1); + + /* Enable IO Bus Interrupt 0 */ + writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); + + /* Enable CPU Interrupt */ + writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); + + iounmap(p); + return 0; +} + +/* UART Port Control Register */ +#define NI8430_PORTCON 0x0f +#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) + +static int +pci_ni8430_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar, offset = board->first_offset; + + if (idx >= board->num_ports) + return 1; + + bar = FL_GET_BASE(board->flags); + offset += idx * board->uart_offset; + + base = pci_resource_start(priv->dev, bar); + len = pci_resource_len(priv->dev, bar); + p = ioremap_nocache(base, len); + + /* enable the transciever */ + writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, + p + offset + NI8430_PORTCON); + + iounmap(p); + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + + +static int pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means

parallel, serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) + return 0; + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return 0; + + if (num_serial == 0) + return -ENODEV; + return num_serial; +} + +/* + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +static int pci_ite887x_init(struct pci_dev *dev) +{ + /* inta_addr are the configuration addresses of the ITE */ + static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, + 0x200, 0x280, 0 }; + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + i = 0; + while (inta_addr[i] && iobase == NULL) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + iobase = NULL; + } + i++; + } + + if (!inta_addr[i]) { + printk(KERN_ERR "ite887x: could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void __devexit pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + +static int +pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int +ce4100_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + int ret; + + ret = setup_port(priv, port, 0, 0, board->reg_shift); + port->iotype = UPIO_MEM32; + port->type = PORT_XSCALE; + port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->regshift = 2; + + return ret; +} + +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + +/* This should be in linux/pci_ids.h */ +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_TITAN_200I 0x8028 +#define PCI_DEVICE_ID_TITAN_400I 0x8048 +#define PCI_DEVICE_ID_TITAN_800I 0x8088 +#define PCI_DEVICE_ID_TITAN_800EH 0xA007 +#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 +#define PCI_DEVICE_ID_TITAN_400EH 0xA009 +#define PCI_DEVICE_ID_TITAN_100E 0xA010 +#define PCI_DEVICE_ID_TITAN_200E 0xA012 +#define PCI_DEVICE_ID_TITAN_400E 0xA013 +#define PCI_DEVICE_ID_TITAN_800E 0xA014 +#define PCI_DEVICE_ID_TITAN_200EI 0xA016 +#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 + +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] __refdata = { + /* + * ADDI-DATA GmbH communication cards + */ + { + .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, + .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = addidata_apci7800_setup, + }, + /* + * AFAVLAB cards - these may be called via parport_serial + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CE4100_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = ce4100_serial_setup, + }, + /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ite887x_exit), + }, + /* + * National Instruments + */ + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8430_init, + .setup = pci_ni8430_setup, + .exit = __devexit_p(pci_ni8430_exit), + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_SUBVENDOR_ID_PERLE, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SIIG cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig_init, + .setup = pci_siig_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_default_setup, + }, + /* + * For Oxford Semiconductor and Mainpine + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static inline int get_pci_irq(struct pci_dev *dev, + const struct pciserial_board *board) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud{_offsetinhex} + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * offsetinhex = offset for each sequential port (in hex) + * + * This table is sorted by (in order): bn, bt, baud, offsetindex, n. + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + pbn_b0_8_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + + pbn_b0_2_1843200, + pbn_b0_4_1843200, + + pbn_b0_2_1843200_200, + pbn_b0_4_1843200_200, + pbn_b0_8_1843200_200, + + pbn_b0_1_4000000, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + pbn_b1_16_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_2_1250000, + + pbn_b1_bt_1_115200, + pbn_b1_bt_2_115200, + pbn_b1_bt_4_115200, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_2_115200, + pbn_b2_4_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_8_1152000, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_2_115200, + pbn_b3_4_115200, + pbn_b3_8_115200, + + pbn_b4_bt_2_921600, + pbn_b4_bt_4_921600, + pbn_b4_bt_8_921600, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_exsys_4055, + pbn_plx_romulus, + pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, + pbn_exar_ibm_saturn, + pbn_pasemi_1682M, + pbn_ni8430_2, + pbn_ni8430_4, + pbn_ni8430_8, + pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, + pbn_ce4100_1_115200, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pciserial_board pci_boards[] __devinitdata = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_8_115200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 8, + }, + [pbn_b0_4_1843200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_4_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_8_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_16_115200] = { + .flags = FL_BASE1, + .num_ports = 16, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_1250000] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_4_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_4_115200] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_2_115200] = { + .flags = FL_BASE3, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b4_bt_2_921600] = { + .flags = FL_BASE4, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_4_921600] = { + .flags = FL_BASE4, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_8_921600] = { + .flags = FL_BASE4, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, + /* + * National Instruments 843x + */ + [pbn_ni8430_16] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + /* + * ADDI-DATA GmbH PCI-Express communication cards + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ce4100_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .reg_shift = 2, + }, +}; + +static const struct pci_device_id softmodem_blacklist[] = { + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int __devinit +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + const struct pci_device_id *blacklist; + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + /* + * Do not access blacklisted devices that are known not to + * feature serial ports. + */ + for (blacklist = softmodem_blacklist; + blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); + blacklist++) { + if (dev->vendor == blacklist->vendor && + dev->device == blacklist->device) + return -ENODEV; + } + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) +{ + struct uart_port serial_port; + struct serial_private *priv; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } + if (rc) + nr_ports = rc; + } + + priv = kzalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + priv = ERR_PTR(-ENOMEM); + goto err_deinit; + } + + priv->dev = dev; + priv->quirk = quirk; + + memset(&serial_port, 0, sizeof(struct uart_port)); + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board); + serial_port.dev = &dev->dev; + + for (i = 0; i < nr_ports; i++) { + if (quirk->setup(priv, board, &serial_port, i)) + break; + +#ifdef SERIAL_DEBUG_PCI + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", + serial_port.iobase, serial_port.irq, serial_port.iotype); +#endif + + priv->line[i] = serial8250_register_port(&serial_port); + if (priv->line[i] < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); + break; + } + } + priv->nr = i; + return priv; + +err_deinit: + if (quirk->exit) + quirk->exit(dev); +err_out: + return priv; +} +EXPORT_SYMBOL_GPL(pciserial_init_ports); + +void pciserial_remove_ports(struct serial_private *priv) +{ + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(priv->dev); + if (quirk->exit) + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + const struct pciserial_board *board; + struct pciserial_board tmp; + int rc; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, &tmp); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + + disable: + pci_disable_device(dev); + return rc; +} + +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); +} + +#ifdef CONFIG_PM +static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_suspend_ports(priv); + + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_resume_one(struct pci_dev *dev) +{ + int err; + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + if (priv) { + /* + * The device may have been disabled. Re-enable it. + */ + err = pci_enable_device(dev); + /* FIXME: We cannot simply error out here */ + if (err) + printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n"); + pciserial_resume_ports(priv); + } + return 0; +} +#endif + +static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, + pbn_b1_2_1250000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, + pbn_b0_2_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, + pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, + PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, + pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, + + /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_2_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, + + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, + /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + + /* + * Mainpine series cards: Fairly standard layout but fools + * parts of the autodetect in some cases and uses otherwise + * unmatched communications subclasses in the PCI Express case + */ + + { /* RockForceDUO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0300, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0400, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0600, + 0, 0, pbn_b0_2_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0700, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0800, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0C00, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUARTRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0D00, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x1D00, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceD1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2000, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceF1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2100, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceD2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceF2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2300, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceD4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2400, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceF4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceD8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2600, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceF8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2700, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express D1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3000, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express F1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3100, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express D2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3200, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express F2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3300, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express D4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3400, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express F4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3500, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express D8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3C00, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express F8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3D00, + 0, 0, pbn_b0_8_115200 }, + + + /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* + * National Instruments + */ + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + + /* + * ADDI-DATA GmbH communication cards + */ + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA_OLD, + PCI_DEVICE_ID_ADDIDATA_APCI7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b1_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7800_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + PCI_VENDOR_ID_IBM, 0x0299, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + /* + * Best Connectivity PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* Intel CE4100 */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ce4100_1_115200 }, + + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = __devexit_p(pciserial_remove_one), +#ifdef CONFIG_PM + .suspend = pciserial_suspend_one, + .resume = pciserial_resume_one, +#endif + .id_table = serial_pci_tbl, +}; + +static int __init serial8250_pci_init(void) +{ + return pci_register_driver(&serial_pci_driver); +} + +static void __exit serial8250_pci_exit(void) +{ + pci_unregister_driver(&serial_pci_driver); +} + +module_init(serial8250_pci_init); +module_exit(serial8250_pci_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c new file mode 100644 index 0000000..4822cb5 --- /dev/null +++ b/drivers/tty/serial/8250_pnp.c @@ -0,0 +1,523 @@ +/* + * linux/drivers/char/8250_pnp.c + * + * Probe module for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 + + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Davicom ISA 33.6K Modem */ + { "DAV0336", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 336i PnP Voice Modem */ + { "SUP1381", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Wacom tablets */ + { "WACFXXX", 0 }, + /* Compaq touchscreen */ + { "FPI2002", 0 }, + /* Fujitsu Stylistic touchscreens */ + { "FUJ02B2", 0 }, + { "FUJ02B3", 0 }, + /* Fujitsu Stylistic LT touchscreens */ + { "FUJ02B4", 0 }, + /* Passive Fujitsu Stylistic touchscreens */ + { "FUJ02B6", 0 }, + { "FUJ02B7", 0 }, + { "FUJ02B8", 0 }, + { "FUJ02B9", 0 }, + { "FUJ02BC", 0 }, + /* Fujitsu Wacom Tablet PC device */ + { "FUJ02E5", 0 }, + /* Fujitsu P-series tablet PC device */ + { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, + /* + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in + * disguise) + */ + { "LTS0001", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unknown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static char *modem_names[] __devinitdata = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static int __devinit check_name(char *name) +{ + char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return 1; + + return 0; +} + +static int __devinit check_resources(struct pnp_dev *dev) +{ + resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return 1; + } + + return 0; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) +{ + if (!(check_name(pnp_dev_name(dev)) || + (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev)) + return 0; + + return -ENODEV; +} + +static int __devinit +serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + struct uart_port port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev, &flags); + if (ret < 0) + return ret; + } + + memset(&port, 0, sizeof(struct uart_port)); + if (pnp_irq_valid(dev, 0)) + port.irq = pnp_irq(dev, 0); + if (pnp_port_valid(dev, 0)) { + port.iobase = pnp_port_start(dev, 0); + port.iotype = UPIO_PORT; + } else if (pnp_mem_valid(dev, 0)) { + port.mapbase = pnp_mem_start(dev, 0); + port.iotype = UPIO_MEM; + port.flags = UPF_IOREMAP; + } else + return -ENODEV; + +#ifdef SERIAL_DEBUG_PNP + printk(KERN_DEBUG + "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", + port.iobase, port.mapbase, port.irq, port.iotype); +#endif + + port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + port.flags |= UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &dev->dev; + + line = serial8250_register_port(&port); + if (line < 0) + return -ENODEV; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void __devexit serial_pnp_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int serial_pnp_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define serial_pnp_suspend NULL +#define serial_pnp_resume NULL +#endif /* CONFIG_PM */ + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .probe = serial_pnp_probe, + .remove = __devexit_p(serial_pnp_remove), + .suspend = serial_pnp_suspend, + .resume = serial_pnp_resume, + .id_table = pnp_dev_table, +}; + +static int __init serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +static void __exit serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + +module_init(serial8250_pnp_init); +module_exit(serial8250_pnp_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig new file mode 100644 index 0000000..c1df767 --- /dev/null +++ b/drivers/tty/serial/Kconfig @@ -0,0 +1,1598 @@ +# +# Serial device configuration +# + +menu "Serial drivers" + depends on HAS_IOMEM + +# +# The new 8250/16550 serial drivers +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EMBEDDED + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + +config SERIAL_8250_PNP + tristate "8250/16550 PNP device support" if EMBEDDED + depends on SERIAL_8250 && PNP + default SERIAL_8250 + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_MCA + tristate "Support 8250-type ports on MCA buses" + depends on SERIAL_8250 != n && MCA + help + Say Y here if you have a MCA serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_mca. + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 + select SERIAL_8250_SHARE_IRQ + help + Selecting this option will add support for the integrated serial + port hardware found on MIPS RM9122 and similar processors. + If unsure, say N. + +comment "Non-8250 serial port support" + +config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a + Cirrus Logic EP93xx CPU, say Y or M here. + + If unsure, say N. + +config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_AMBA_PL011 + tristate "ARM AMBA PL011 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have + an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M + here. + + If unsure, say N. + +config SERIAL_AMBA_PL011_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL011=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAMA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SB1250_DUART + tristate "BCM1xxx on-chip DUART serial support" + depends on SIBYTE_SB1xxx_SOC=y + select SERIAL_CORE + default y + ---help--- + Support for the asynchronous serial interface (DUART) included in + the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that + the letter D in DUART stands for "dual", which is how the device + is implemented. Depending on the SOC configuration there may be + one or more DUARTs available of which all are handled. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called sb1250-duart. + +config SERIAL_SB1250_DUART_CONSOLE + bool "Support for console on a BCM1xxx DUART serial port" + depends on SERIAL_SB1250_DUART=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + If unsure, say Y. + +config SERIAL_ATMEL + bool "AT91 / AT32 on-chip serial port support" + depends on (ARM && ARCH_AT91) || AVR32 + select SERIAL_CORE + help + This enables the driver for the on-chip UARTs of the Atmel + AT91 and AT32 processors. + +config SERIAL_ATMEL_CONSOLE + bool "Support for console on AT91 / AT32 serial port" + depends on SERIAL_ATMEL=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use an on-chip UART on a Atmel + AT91 or AT32 processor as the system console (the system + console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + +config SERIAL_ATMEL_PDC + bool "Support DMA transfers on AT91 / AT32 serial port" + depends on SERIAL_ATMEL + default y + help + Say Y here if you wish to use the PDC to do DMA transfers to + and from the Atmel AT91 / AT32 serial port. In order to + actually use DMA transfers, make sure that the use_dma_tx + and use_dma_rx members in the atmel_uart_data struct is set + appropriately for each port. + + Note that break and error handling currently doesn't work + properly when DMA is enabled. Make sure that ports where + this matters don't use DMA. + +config SERIAL_ATMEL_TTYAT + bool "Install as device ttyATn instead of ttySn" + depends on SERIAL_ATMEL=y + help + Say Y here if you wish to have the internal AT91 / AT32 UARTs + appear as /dev/ttyATn (major 204, minor starting at 154) + instead of the normal /dev/ttySn (major 4, minor starting at + 64). This is necessary if you also want other UARTs, such as + external 8250/16C550 compatible UARTs. + The ttySn nodes are legally reserved for the 8250 serial driver + but are often misused by other serial drivers. + + To use this, you should create suitable ttyATn device nodes in + /dev/, and pass "console=ttyATn" to the kernel. + + Say Y if you have an external 8250/16C550 UART. If unsure, say N. + +config SERIAL_KS8695 + bool "Micrel KS8695 (Centaur) serial port support" + depends on ARCH_KS8695 + select SERIAL_CORE + help + This selects the Micrel Centaur KS8695 UART. Say Y here. + +config SERIAL_KS8695_CONSOLE + bool "Support for console on KS8695 (Centaur) serial port" + depends on SERIAL_KS8695=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a KS8695 (Centaur) UART as the + system console (the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode). + +config SERIAL_CLPS711X + tristate "CLPS711X serial port support" + depends on ARM && ARCH_CLPS711X + select SERIAL_CORE + help + ::: To be written ::: + +config SERIAL_CLPS711X_CONSOLE + bool "Support for console on CLPS711X serial port" + depends on SERIAL_CLPS711X=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCL1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SAMSUNG + tristate "Samsung SoC serial support" + depends on ARM && PLAT_SAMSUNG + select SERIAL_CORE + help + Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, + providing /dev/ttySAC0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured. + +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + +config SERIAL_SAMSUNG_UARTS + int + depends on ARM && PLAT_SAMSUNG + default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 + default 4 if SERIAL_SAMSUNG_UARTS_4 + default 3 + help + Select the number of available UART ports for the Samsung S3C + serial driver + +config SERIAL_SAMSUNG_DEBUG + bool "Samsung SoC serial debug" + depends on SERIAL_SAMSUNG && DEBUG_LL + help + Add support for debugging the serial driver. Since this is + generally being used as a console, we use our own output + routines that go via the low-level debug printascii() + function. + +config SERIAL_SAMSUNG_CONSOLE + bool "Support for console on Samsung SoC serial port" + depends on SERIAL_SAMSUNG=y + select SERIAL_CORE_CONSOLE + help + Allow selection of the S3C24XX on-board serial ports for use as + an virtual console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySACx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_S3C2400 + tristate "Samsung S3C2410 Serial port support" + depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 + default y if CPU_S3C2400 + help + Serial port support for the Samsung S3C2400 SoC + +config SERIAL_S3C2410 + tristate "Samsung S3C2410 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C2410 + default y if CPU_S3C2410 + help + Serial port support for the Samsung S3C2410 SoC + +config SERIAL_S3C2412 + tristate "Samsung S3C2412/S3C2413 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C2412 + default y if CPU_S3C2412 + help + Serial port support for the Samsung S3C2412 and S3C2413 SoC + +config SERIAL_S3C2440 + tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) + default y if CPU_S3C2440 + default y if CPU_S3C2442 + select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 + help + Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC + +config SERIAL_S3C24A0 + tristate "Samsung S3C24A0 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C24A0 + default y if CPU_S3C24A0 + help + Serial port support for the Samsung S3C24A0 SoC + +config SERIAL_S3C6400 + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) + select SERIAL_SAMSUNG_UARTS_4 + default y + help + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 + and S5PC100 SoCs + +config SERIAL_S5PV210 + tristate "Samsung S5PV210 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) + select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) + default y + help + Serial port support for Samsung's S5P Family of SoC's + + +config SERIAL_MAX3100 + tristate "MAX3100 support" + depends on SPI + select SERIAL_CORE + help + MAX3100 chip support + +config SERIAL_MAX3107 + tristate "MAX3107 support" + depends on SPI + select SERIAL_CORE + help + MAX3107 chip support + +config SERIAL_MAX3107_AAVA + tristate "MAX3107 AAVA platform support" + depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB + select SERIAL_CORE + help + Support for the MAX3107 chip configuration found on the AAVA + platform. Includes the extra initialisation and GPIO support + neded for this device. + +config SERIAL_DZ + bool "DECstation DZ serial driver" + depends on MACH_DECSTATION && 32BIT + select SERIAL_CORE + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. + +config SERIAL_DZ_CONSOLE + bool "Support console on DECstation DZ serial driver" + depends on SERIAL_DZ=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. + + If unsure, say Y. + +config SERIAL_ZS + tristate "DECstation Z85C30 serial support" + depends on MACH_DECSTATION + select SERIAL_CORE + default y + ---help--- + Support for the Zilog 85C350 serial communications controller used + for serial ports in newer DECstation systems. These include the + DECsystem 5900 and all models of the DECstation and DECsystem 5000 + systems except from model 200. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called zs. + +config SERIAL_ZS_CONSOLE + bool "Support for console on a DECstation Z85C30 serial port" + depends on SERIAL_ZS=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS1 as the serial console on the + Maxine and ttyS3 on the others using this driver. + + If unsure, say Y. + +config SERIAL_21285 + tristate "DC21285 serial port support" + depends on ARM && FOOTBRIDGE + select SERIAL_CORE + help + If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ + PCI bridge you can enable its onboard serial port by enabling this + option. + +config SERIAL_21285_CONSOLE + bool "Console on DC21285 serial port" + depends on SERIAL_21285=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the 21285 footbridge you can + make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyFB". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_MPSC + bool "Marvell MPSC serial port support" + depends on PPC32 && MV64X60 + select SERIAL_CORE + help + Say Y here if you want to use the Marvell MPSC serial controller. + +config SERIAL_MPSC_CONSOLE + bool "Support for console on Marvell MPSC serial port" + depends on SERIAL_MPSC + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console on a Marvell MPSC. + +config SERIAL_PXA + bool "PXA serial port support" + depends on ARCH_PXA || ARCH_MMP + select SERIAL_CORE + help + If you have a machine based on an Intel XScale PXA2xx CPU you + can enable its onboard serial ports by enabling this option. + +config SERIAL_PXA_CONSOLE + bool "Console on PXA serial port" + depends on SERIAL_PXA + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Intel XScale PXA + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SA1100 + bool "SA1100 serial port support" + depends on ARM && ARCH_SA1100 + select SERIAL_CORE + help + If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you + can enable its onboard serial port by enabling this option. + Please read for further + info. + +config SERIAL_SA1100_CONSOLE + bool "Console on SA1100 serial port" + depends on SERIAL_SA1100 + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the SA1100/SA1110 StrongARM + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_MRST_MAX3110 + tristate "SPI UART driver for Max3110" + depends on SPI_DW_PCI + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + This is the UART protocol driver for the MAX3110 device on + the Intel Moorestown platform. On other systems use the max3100 + driver. + +config SERIAL_MFD_HSU + tristate "Medfield High Speed UART support" + depends on PCI + select SERIAL_CORE + +config SERIAL_MFD_HSU_CONSOLE + boolean "Medfile HSU serial console support" + depends on SERIAL_MFD_HSU=y + select SERIAL_CORE_CONSOLE + +config SERIAL_BFIN + tristate "Blackfin serial port support" + depends on BLACKFIN + select SERIAL_CORE + select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) + help + Add support for the built-in UARTs on the Blackfin. + + To compile this driver as a module, choose M here: the + module will be called bfin_5xx. + +config SERIAL_BFIN_CONSOLE + bool "Console on Blackfin serial port" + depends on SERIAL_BFIN=y + select SERIAL_CORE_CONSOLE + +choice + prompt "UART Mode" + depends on SERIAL_BFIN + default SERIAL_BFIN_DMA + help + This driver supports the built-in serial ports of the Blackfin family + of CPUs + +config SERIAL_BFIN_DMA + bool "DMA mode" + depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n + help + This driver works under DMA mode. If this option is selected, the + blackfin simple dma driver is also enabled. + +config SERIAL_BFIN_PIO + bool "PIO mode" + help + This driver works under PIO mode. + +endchoice + +config SERIAL_BFIN_UART0 + bool "Enable UART0" + depends on SERIAL_BFIN + help + Enable UART0 + +config BFIN_UART0_CTSRTS + bool "Enable UART0 hardware flow control" + depends on SERIAL_BFIN_UART0 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART1 + bool "Enable UART1" + depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) + help + Enable UART1 + +config BFIN_UART1_CTSRTS + bool "Enable UART1 hardware flow control" + depends on SERIAL_BFIN_UART1 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART2 + bool "Enable UART2" + depends on SERIAL_BFIN && (BF54x || BF538 || BF539) + help + Enable UART2 + +config BFIN_UART2_CTSRTS + bool "Enable UART2 hardware flow control" + depends on SERIAL_BFIN_UART2 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART3 + bool "Enable UART3" + depends on SERIAL_BFIN && (BF54x) + help + Enable UART3 + +config BFIN_UART3_CTSRTS + bool "Enable UART3 hardware flow control" + depends on SERIAL_BFIN_UART3 + help + Enable hardware flow control in the driver. + +config SERIAL_IMX + bool "IMX serial port support" + depends on ARM && (ARCH_IMX || ARCH_MXC) + select SERIAL_CORE + select RATIONAL + help + If you have a machine based on a Motorola IMX CPU you + can enable its onboard serial port by enabling this option. + +config SERIAL_IMX_CONSOLE + bool "Console on IMX serial port" + depends on SERIAL_IMX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Motorola IMX + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_UARTLITE + tristate "Xilinx uartlite serial port support" + depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE + select SERIAL_CORE + help + Say Y here if you want to use the Xilinx uartlite serial controller. + + To compile this driver as a module, choose M here: the + module will be called uartlite. + +config SERIAL_UARTLITE_CONSOLE + bool "Support for console on Xilinx uartlite serial port" + depends on SERIAL_UARTLITE=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a Xilinx uartlite as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + +config SERIAL_SUNCORE + bool + depends on SPARC + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + default y + +config SERIAL_SUNZILOG + tristate "Sun Zilog8530 serial support" + depends on SPARC + help + This driver supports the Zilog8530 serial ports found on many Sparc + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_SUNZILOG_CONSOLE + bool "Console on Sun Zilog8530 serial port" + depends on SERIAL_SUNZILOG=y + help + If you would like to be able to use the Zilog8530 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNSU + tristate "Sun SU serial support" + depends on SPARC && PCI + help + This driver supports the 8250 serial ports that run the keyboard and + mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able + to these serial ports. + +config SERIAL_SUNSU_CONSOLE + bool "Console on Sun SU serial port" + depends on SERIAL_SUNSU=y + help + If you would like to be able to use the SU serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_MUX + tristate "Serial MUX support" + depends on GSC + select SERIAL_CORE + default y + ---help--- + Saying Y here will enable the hardware MUX serial driver for + the Nova, K class systems and D class with a 'remote control card'. + The hardware MUX is not 8250/16550 compatible therefore the + /dev/ttyB0 device is shared between the Serial MUX and the PDC + software console. The following steps need to be completed to use + the Serial MUX: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_MUX_CONSOLE + bool "Support for console on serial MUX" + depends on SERIAL_MUX=y + select SERIAL_CORE_CONSOLE + default y + +config PDC_CONSOLE + bool "PDC software console support" + depends on PARISC && !SERIAL_MUX && VT + default n + help + Saying Y here will enable the software based PDC console to be + used as the system console. This is useful for machines in + which the hardware based console has not been written yet. The + following steps must be competed to use the PDC console: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_SUNSAB + tristate "Sun Siemens SAB82532 serial support" + depends on SPARC && PCI + help + This driver supports the Siemens SAB82532 DUSCC serial ports on newer + (PCI) UltraSPARC systems. Say Y or M if you want to be able to these + serial ports. + +config SERIAL_SUNSAB_CONSOLE + bool "Console on Sun Siemens SAB82532 serial port" + depends on SERIAL_SUNSAB=y + help + If you would like to be able to use the SAB82532 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNHV + bool "Sun4v Hypervisor Console support" + depends on SPARC64 + help + This driver supports the console device found on SUN4V Sparc + systems. Say Y if you want to be able to use this device. + +config SERIAL_IP22_ZILOG + tristate "SGI Zilog8530 serial support" + depends on SGI_HAS_ZILOG + select SERIAL_CORE + help + This driver supports the Zilog8530 serial ports found on SGI + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_IP22_ZILOG_CONSOLE + bool "Console on SGI Zilog8530 serial port" + depends on SERIAL_IP22_ZILOG=y + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI + tristate "SuperH SCI(F) serial port support" + depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) + select SERIAL_CORE + +config SERIAL_SH_SCI_NR_UARTS + int "Maximum number of SCI(F) serial ports" + depends on SERIAL_SH_SCI + default "2" + +config SERIAL_SH_SCI_CONSOLE + bool "Support for console on SuperH SCI(F)" + depends on SERIAL_SH_SCI=y + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI_DMA + bool "DMA support" + depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL + +config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial ports, say Y. Otherwise, say N. + +config SERIAL_PNX8XXX_CONSOLE + bool "Enable PNX8XX0 serial console" + depends on SERIAL_PNX8XXX + select SERIAL_CORE_CONSOLE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial console, say Y. Otherwise, say N. + +config SERIAL_CORE + tristate + +config SERIAL_CORE_CONSOLE + bool + +config CONSOLE_POLL + bool + +config SERIAL_68328 + bool "68328 serial support" + depends on M68328 || M68EZ328 || M68VZ328 + help + This driver supports the built-in serial port of the Motorola 68328 + (standard, EZ and VZ varieties). + +config SERIAL_68328_RTS_CTS + bool "Support RTS/CTS on 68328 serial port" + depends on SERIAL_68328 + +config SERIAL_MCF + bool "Coldfire serial support" + depends on COLDFIRE + select SERIAL_CORE + help + This serial driver supports the Freescale Coldfire serial ports. + +config SERIAL_MCF_BAUDRATE + int "Default baudrate for Coldfire serial ports" + depends on SERIAL_MCF + default 19200 + help + This setting lets you define what the default baudrate is for the + ColdFire serial ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_MCF_CONSOLE + bool "Coldfire serial console support" + depends on SERIAL_MCF + select SERIAL_CORE_CONSOLE + help + Enable a ColdFire internal serial port to be the system console. + +config SERIAL_68360_SMC + bool "68360 SMC uart support" + depends on M68360 + help + This driver supports the SMC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360_SCC + bool "68360 SCC uart support" + depends on M68360 + help + This driver supports the SCC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360 + bool + depends on SERIAL_68360_SMC || SERIAL_68360_SCC + default y + +config SERIAL_PMACZILOG + tristate "Mac or PowerMac z85c30 ESCC support" + depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) + select SERIAL_CORE + help + This driver supports the Zilog z85C30 serial ports found on + (Power)Mac machines. + Say Y or M if you want to be able to these serial ports. + +config SERIAL_PMACZILOG_TTYS + bool "Use ttySn device nodes for Zilog z85c30" + depends on SERIAL_PMACZILOG + help + The pmac_zilog driver for the z85C30 chip on many powermacs + historically used the device numbers for /dev/ttySn. The + 8250 serial port driver also uses these numbers, which means + the two drivers being unable to coexist; you could not use + both z85C30 and 8250 type ports at the same time. + + If this option is not selected, the pmac_zilog driver will + use the device numbers allocated for /dev/ttyPZn. This allows + the pmac_zilog and 8250 drivers to co-exist, but may cause + existing userspace setups to break. Programs that need to + access the built-in serial ports on powermacs will need to + be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. + + If you enable this option, any z85c30 ports in the system will + be registered as ttyS0 onwards as in the past, and you will be + unable to use the 8250 module for PCMCIA or other 16C550-style + UARTs. + + Say N unless you need the z85c30 ports on your (Power)Mac + to appear as /dev/ttySn. + +config SERIAL_PMACZILOG_CONSOLE + bool "Console on Mac or PowerMac z85c30 serial port" + depends on SERIAL_PMACZILOG=y + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use the z85c30 serial port + on your (Power)Mac as the console, you can do so by answering + Y to this option. + +config SERIAL_LH7A40X + tristate "Sharp LH7A40X embedded UART support" + depends on ARM && ARCH_LH7A40X + select SERIAL_CORE + help + This enables support for the three on-board UARTs of the + Sharp LH7A40X series CPUs. Choose Y or M. + +config SERIAL_LH7A40X_CONSOLE + bool "Support for console on Sharp LH7A40X serial port" + depends on SERIAL_LH7A40X=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use one of the serial ports as the + system console--the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode. + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the default system console, but + you can alter that using a kernel command line, for example + "console=ttyAM1". + +config SERIAL_CPM + tristate "CPM SCC/SMC serial port support" + depends on CPM2 || 8xx + select SERIAL_CORE + help + This driver supports the SCC and SMC serial ports on Motorola + embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) + +config SERIAL_CPM_CONSOLE + bool "Support for console on CPM SCC/SMC serial port" + depends on SERIAL_CPM=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a SCC or SMC CPM UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCPM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SGI_L1_CONSOLE + bool "SGI Altix L1 serial console support" + depends on IA64_GENERIC || IA64_SGI_SN2 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + If you have an SGI Altix and you would like to use the system + controller serial port as your console (you want this!), + say Y. Otherwise, say N. + +config SERIAL_MPC52xx + tristate "Freescale MPC52xx/MPC512x family PSC serial support" + depends on PPC_MPC52xx || PPC_MPC512x + select SERIAL_CORE + help + This driver supports MPC52xx and MPC512x PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Note that + for use as console, it must be included in kernel and not as a + module. + +config SERIAL_MPC52xx_CONSOLE + bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" + depends on SERIAL_MPC52xx=y + select SERIAL_CORE_CONSOLE + help + Select this options if you'd like to use one of the PSC serial port + of the Freescale MPC52xx family as a console. + +config SERIAL_MPC52xx_CONSOLE_BAUD + int "Freescale MPC52xx/MPC512x family PSC serial port baud" + depends on SERIAL_MPC52xx_CONSOLE=y + default "9600" + help + Select the MPC52xx console baud rate. + This value is only used if the bootloader doesn't pass in the + console baudrate + +config SERIAL_ICOM + tristate "IBM Multiport Serial Adapter" + depends on PCI && (PPC_ISERIES || PPC_PSERIES) + select SERIAL_CORE + select FW_LOADER + help + This driver is for a family of multiport serial adapters + including 2 port RVX, 2 port internal modem, 4 port internal + modem and a split 1 port RVX and 1 port internal modem. + + This driver can also be built as a module. If so, the module + will be called icom. + +config SERIAL_M32R_SIO + bool "M32R SIO I/F" + depends on M32R + default y + select SERIAL_CORE + help + Say Y here if you want to use the M32R serial controller. + +config SERIAL_M32R_SIO_CONSOLE + bool "use SIO console" + depends on SERIAL_M32R_SIO=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console. + + If you use an M3T-M32700UT or an OPSPUT platform, + please say also y for SERIAL_M32R_PLDSIO. + +config SERIAL_M32R_PLDSIO + bool "M32R SIO I/F on a PLD" + depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) + default n + help + Say Y here if you want to use the M32R serial controller + on a PLD (Programmable Logic Device). + + If you use an M3T-M32700UT or an OPSPUT platform, + please say Y. + +config SERIAL_TXX9 + bool "TMPTX39XX/49XX SIO support" + depends on HAS_TXX9_SERIAL + select SERIAL_CORE + default y + +config HAS_TXX9_SERIAL + bool + +config SERIAL_TXX9_NR_UARTS + int "Maximum number of TMPTX39XX/49XX SIO ports" + depends on SERIAL_TXX9 + default "6" + +config SERIAL_TXX9_CONSOLE + bool "TMPTX39XX/49XX SIO Console support" + depends on SERIAL_TXX9=y + select SERIAL_CORE_CONSOLE + +config SERIAL_TXX9_STDSERIAL + bool "TX39XX/49XX SIO act as standard serial" + depends on !SERIAL_8250 && SERIAL_TXX9 + +config SERIAL_VR41XX + tristate "NEC VR4100 series Serial Interface Unit support" + depends on CPU_VR41XX + select SERIAL_CORE + help + If you have a NEC VR4100 series processor and you want to use + Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) + (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. + +config SERIAL_VR41XX_CONSOLE + bool "Enable NEC VR4100 series Serial Interface Unit console" + depends on SERIAL_VR41XX=y + select SERIAL_CORE_CONSOLE + help + If you have a NEC VR4100 series processor and you want to use + a console on a serial port, say Y. Otherwise, say N. + +config SERIAL_JSM + tristate "Digi International NEO PCI Support" + depends on PCI + select SERIAL_CORE + help + This is a driver for Digi International's Neo series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports PCI boards only. + + If you have a card like this, say Y here, otherwise say N. + + To compile this driver as a module, choose M here: the + module will be called jsm. + +config SERIAL_SGI_IOC4 + tristate "SGI IOC4 controller serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC4 based Base IO card + and wish to use the serial ports on this card, say Y. + Otherwise, say N. + +config SERIAL_SGI_IOC3 + tristate "SGI Altix IOC3 serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC3 serial card, + say Y or M. Otherwise, say N. + +config SERIAL_MSM + bool "MSM on-chip serial port support" + depends on ARM && ARCH_MSM + select SERIAL_CORE + +config SERIAL_MSM_CONSOLE + bool "MSM serial console support" + depends on SERIAL_MSM=y + select SERIAL_CORE_CONSOLE + +config SERIAL_VT8500 + bool "VIA VT8500 on-chip serial port support" + depends on ARM && ARCH_VT8500 + select SERIAL_CORE + +config SERIAL_VT8500_CONSOLE + bool "VIA VT8500 serial console support" + depends on SERIAL_VT8500=y + select SERIAL_CORE_CONSOLE + +config SERIAL_NETX + tristate "NetX serial port support" + depends on ARM && ARCH_NETX + select SERIAL_CORE + help + If you have a machine based on a Hilscher NetX SoC you + can enable its onboard serial port by enabling this option. + + To compile this driver as a module, choose M here: the + module will be called netx-serial. + +config SERIAL_NETX_CONSOLE + bool "Console on NetX serial port" + depends on SERIAL_NETX=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Hilscher NetX SoC + you can make it the console by answering Y to this option. + +config SERIAL_OF_PLATFORM + tristate "Serial port on Open Firmware platform bus" + depends on OF + depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL + help + If you have a PowerPC based system that has serial ports + on a platform specific bus, you should enable this option. + Currently, only 8250 compatible ports are supported, but + others can easily be added. + +config SERIAL_OMAP + tristate "OMAP serial port support" + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 + select SERIAL_CORE + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + By enabling this option you take advantage of dma feature available + with the omap-serial driver. DMA support can be enabled from platform + data. + +config SERIAL_OMAP_CONSOLE + bool "Console on OMAP serial port" + depends on SERIAL_OMAP + select SERIAL_CORE_CONSOLE + help + Select this option if you would like to use omap serial port as + console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyOx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_OF_PLATFORM_NWPSERIAL + tristate "NWP serial port driver" + depends on PPC_OF && PPC_DCR + select SERIAL_OF_PLATFORM + select SERIAL_CORE_CONSOLE + select SERIAL_CORE + help + This driver supports the cell network processor nwp serial + device. + +config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE + bool "Console on NWP serial port" + depends on SERIAL_OF_PLATFORM_NWPSERIAL=y + select SERIAL_CORE_CONSOLE + help + Support for Console on the NWP serial ports. + +config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE + select SERIAL_CORE + select FW_LOADER + default n + help + This driver supports the QE serial ports on Freescale embedded + PowerPC that contain a QUICC Engine. + +config SERIAL_SC26XX + tristate "SC2681/SC2692 serial port support" + depends on SNI_RM + select SERIAL_CORE + help + This is a driver for the onboard serial ports of + older RM400 machines. + +config SERIAL_SC26XX_CONSOLE + bool "Console on SC2681/SC2692 serial port" + depends on SERIAL_SC26XX + select SERIAL_CORE_CONSOLE + help + Support for Console on SC2681/SC2692 serial ports. + +config SERIAL_BFIN_SPORT + tristate "Blackfin SPORT emulate UART" + depends on BLACKFIN + select SERIAL_CORE + help + Enable SPORT emulate UART on Blackfin series. + + To compile this driver as a module, choose M here: the + module will be called bfin_sport_uart. + +config SERIAL_BFIN_SPORT_CONSOLE + bool "Console on Blackfin sport emulated uart" + depends on SERIAL_BFIN_SPORT=y + select SERIAL_CORE_CONSOLE + +config SERIAL_BFIN_SPORT0_UART + bool "Enable UART over SPORT0" + depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) + help + Enable UART over SPORT0 + +config SERIAL_BFIN_SPORT0_UART_CTSRTS + bool "Enable UART over SPORT0 hardware flow control" + depends on SERIAL_BFIN_SPORT0_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT1_UART + bool "Enable UART over SPORT1" + depends on SERIAL_BFIN_SPORT + help + Enable UART over SPORT1 + +config SERIAL_BFIN_SPORT1_UART_CTSRTS + bool "Enable UART over SPORT1 hardware flow control" + depends on SERIAL_BFIN_SPORT1_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT2_UART + bool "Enable UART over SPORT2" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT2 + +config SERIAL_BFIN_SPORT2_UART_CTSRTS + bool "Enable UART over SPORT2 hardware flow control" + depends on SERIAL_BFIN_SPORT2_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT3_UART + bool "Enable UART over SPORT3" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT3 + +config SERIAL_BFIN_SPORT3_UART_CTSRTS + bool "Enable UART over SPORT3 hardware flow control" + depends on SERIAL_BFIN_SPORT3_UART + help + Enable hardware flow control in the driver. + +config SERIAL_TIMBERDALE + tristate "Support for timberdale UART" + select SERIAL_CORE + ---help--- + Add support for UART controller on timberdale. + +config SERIAL_BCM63XX + tristate "bcm63xx serial port support" + select SERIAL_CORE + depends on BCM63XX + help + If you have a bcm63xx CPU, you can enable its onboard + serial port by enabling this options. + + To compile this driver as a module, choose M here: the + module will be called bcm963xx_uart. + +config SERIAL_BCM63XX_CONSOLE + bool "Console on bcm63xx serial port" + depends on SERIAL_BCM63XX=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the bcm63xx CPU + you can make it the console by answering Y to this option. + +config SERIAL_GRLIB_GAISLER_APBUART + tristate "GRLIB APBUART serial support" + depends on OF + ---help--- + Add support for the GRLIB APBUART serial port. + +config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + bool "Console on GRLIB APBUART serial port" + depends on SERIAL_GRLIB_GAISLER_APBUART=y + select SERIAL_CORE_CONSOLE + help + Support for running a console on the GRLIB APBUART + +config SERIAL_ALTERA_JTAGUART + tristate "Altera JTAG UART support" + select SERIAL_CORE + help + This driver supports the Altera JTAG UART port. + +config SERIAL_ALTERA_JTAGUART_CONSOLE + bool "Altera JTAG UART console support" + depends on SERIAL_ALTERA_JTAGUART=y + select SERIAL_CORE_CONSOLE + help + Enable a Altera JTAG UART port to be the system console. + +config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS + bool "Bypass output when no connection" + depends on SERIAL_ALTERA_JTAGUART_CONSOLE + select SERIAL_CORE_CONSOLE + help + Bypass console output and keep going even if there is no + JTAG terminal connection with the host. + +config SERIAL_ALTERA_UART + tristate "Altera UART support" + select SERIAL_CORE + help + This driver supports the Altera softcore UART port. + +config SERIAL_ALTERA_UART_MAXPORTS + int "Maximum number of Altera UART ports" + depends on SERIAL_ALTERA_UART + default 4 + help + This setting lets you define the maximum number of the Altera + UART ports. The usual default varies from board to board, and + this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_BAUDRATE + int "Default baudrate for Altera UART ports" + depends on SERIAL_ALTERA_UART + default 115200 + help + This setting lets you define what the default baudrate is for the + Altera UART ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_CONSOLE + bool "Altera UART console support" + depends on SERIAL_ALTERA_UART=y + select SERIAL_CORE_CONSOLE + help + Enable a Altera UART port to be the system console. + +config SERIAL_IFX6X60 + tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" + depends on GPIOLIB && SPI && EXPERIMENTAL + help + Support for the IFX6x60 modem devices on Intel MID platforms. + +config SERIAL_PCH_UART + tristate "Intel EG20T PCH UART" + depends on PCI && DMADEVICES + select SERIAL_CORE + select PCH_DMA + help + This driver is for PCH(Platform controller Hub) UART of Intel EG20T + which is an IOH(Input/Output Hub) for x86 embedded processor. + Enabling PCH_DMA, this PCH UART works as DMA mode. +endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile new file mode 100644 index 0000000..8ea92e9 --- /dev/null +++ b/drivers/tty/serial/Makefile @@ -0,0 +1,94 @@ +# +# Makefile for the kernel serial device drivers. +# + +obj-$(CONFIG_SERIAL_CORE) += serial_core.o +obj-$(CONFIG_SERIAL_21285) += 21285.o + +# These Sparc drivers have to appear before others such as 8250 +# which share ttySx minor node space. Otherwise console device +# names change and other unplesantries. +obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o +obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o +obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o +obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o +obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o + +obj-$(CONFIG_SERIAL_8250) += 8250.o +obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o +obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o +obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +obj-$(CONFIG_SERIAL_PXA) += pxa.o +obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o +obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o +obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o +obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o +obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o +obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o +obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o +obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o +obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o +obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o +obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o +obj-$(CONFIG_SERIAL_MAX3100) += max3100.o +obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o +obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o +obj-$(CONFIG_SERIAL_MUX) += mux.o +obj-$(CONFIG_SERIAL_68328) += 68328serial.o +obj-$(CONFIG_SERIAL_68360) += 68360serial.o +obj-$(CONFIG_SERIAL_MCF) += mcf.o +obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o +obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o +obj-$(CONFIG_SERIAL_DZ) += dz.o +obj-$(CONFIG_SERIAL_ZS) += zs.o +obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o +obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o +obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ +obj-$(CONFIG_SERIAL_IMX) += imx.o +obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o +obj-$(CONFIG_SERIAL_ICOM) += icom.o +obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o +obj-$(CONFIG_SERIAL_MPSC) += mpsc.o +obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o +obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o +obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o +obj-$(CONFIG_SERIAL_JSM) += jsm/ +obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o +obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o +obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o +obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o +obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o +obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o +obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_NETX) += netx-serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o +obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o +obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o +obj-$(CONFIG_SERIAL_QE) += ucc_uart.o +obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o +obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o +obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o +obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o +obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o +obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o +obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o +obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c new file mode 100644 index 0000000..f9b49b5 --- /dev/null +++ b/drivers/tty/serial/altera_jtaguart.c @@ -0,0 +1,504 @@ +/* + * altera_jtaguart.c -- Altera JTAG UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_jtaguart" + +/* + * Altera JTAG UART register definitions according to the Altera JTAG UART + * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf + */ + +#define ALTERA_JTAGUART_SIZE 8 + +#define ALTERA_JTAGUART_DATA_REG 0 + +#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF +#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000 +#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16 + +#define ALTERA_JTAGUART_CONTROL_REG 4 + +#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001 +#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002 +#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100 +#define ALTERA_JTAGUART_CONTROL_RI_OFF 8 +#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 +#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 +#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 + +/* + * Local per-uart structure. + */ +struct altera_jtaguart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned long imr; /* Local IMR mirror */ +}; + +static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) +{ + return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ +} + +static void altera_jtaguart_start_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_rx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void altera_jtaguart_enable_ms(struct uart_port *port) +{ +} + +static void altera_jtaguart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + /* Just copy the old termios settings back */ + if (old) + tty_termios_copy_hw(termios, old); +} + +static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char ch, flag; + unsigned long status; + + while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) & + ALTERA_JTAGUART_DATA_RVALID_MSK) { + ch = status & ALTERA_JTAGUART_DATA_DATA_MSK; + flag = TTY_NORMAL; + port->icount.rx++; + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, 0, 0, ch, flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned int pending, count; + + if (port->x_char) { + /* Send special char - probably flow control */ + writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + pending = uart_circ_chars_pending(xmit); + if (pending > 0) { + count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> + ALTERA_JTAGUART_CONTROL_WSPACE_OFF; + if (count > pending) + count = pending; + if (count > 0) { + pending -= count; + while (count--) { + writel(xmit->buf[xmit->tail], + port->membase + ALTERA_JTAGUART_DATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + if (pending < WAKEUP_CHARS) + uart_write_wakeup(port); + } + } + + if (pending == 0) { + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + } +} + +static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned int isr; + + isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >> + ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr; + + spin_lock(&port->lock); + + if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK) + altera_jtaguart_rx_chars(pp); + if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK) + altera_jtaguart_tx_chars(pp); + + spin_unlock(&port->lock); + + return IRQ_RETVAL(isr); +} + +static void altera_jtaguart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_JTAGUART; + + /* Clear mask, so no surprise interrupts. */ + writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static int altera_jtaguart_startup(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + int ret; + + ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_jtaguart_shutdown(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static const char *altera_jtaguart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL; +} + +static int altera_jtaguart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_jtaguart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_jtaguart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART) + return -EINVAL; + return 0; +} + +/* + * Define the basic serial functions we support. + */ +static struct uart_ops altera_jtaguart_ops = { + .tx_empty = altera_jtaguart_tx_empty, + .get_mctrl = altera_jtaguart_get_mctrl, + .set_mctrl = altera_jtaguart_set_mctrl, + .start_tx = altera_jtaguart_start_tx, + .stop_tx = altera_jtaguart_stop_tx, + .stop_rx = altera_jtaguart_stop_rx, + .enable_ms = altera_jtaguart_enable_ms, + .break_ctl = altera_jtaguart_break_ctl, + .startup = altera_jtaguart_startup, + .shutdown = altera_jtaguart_shutdown, + .set_termios = altera_jtaguart_set_termios, + .type = altera_jtaguart_type, + .request_port = altera_jtaguart_request_port, + .release_port = altera_jtaguart_release_port, + .config_port = altera_jtaguart_config_port, + .verify_port = altera_jtaguart_verify_port, +}; + +#define ALTERA_JTAGUART_MAXPORTS 1 +static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) + +int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart + *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_jtaguart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->flags = ASYNC_BOOT_AUTOCONF; + port->ops = &altera_jtaguart_ops; + } + + return 0; +} + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) +static void altera_jtaguart_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; + unsigned long status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + return; /* no connection activity */ + } + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#else +static void altera_jtaguart_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#endif + +static void altera_jtaguart_console_write(struct console *co, const char *s, + unsigned int count) +{ + for (; count; count--, s++) { + altera_jtaguart_console_putc(co, *s); + if (*s == '\n') + altera_jtaguart_console_putc(co, '\r'); + } +} + +static int __init altera_jtaguart_console_setup(struct console *co, + char *options) +{ + struct uart_port *port; + + if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; + port = &altera_jtaguart_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + return 0; +} + +static struct uart_driver altera_jtaguart_driver; + +static struct console altera_jtaguart_console = { + .name = "ttyJ", + .write = altera_jtaguart_console_write, + .device = uart_console_device, + .setup = altera_jtaguart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_jtaguart_driver, +}; + +static int __init altera_jtaguart_console_init(void) +{ + register_console(&altera_jtaguart_console); + return 0; +} + +console_initcall(altera_jtaguart_console_init); + +#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) + +#else + +#define ALTERA_JTAGUART_CONSOLE NULL + +#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */ + +static struct uart_driver altera_jtaguart_driver = { + .owner = THIS_MODULE, + .driver_name = "altera_jtaguart", + .dev_name = "ttyJ", + .major = ALTERA_JTAGUART_MAJOR, + .minor = ALTERA_JTAGUART_MINOR, + .nr = ALTERA_JTAGUART_MAXPORTS, + .cons = ALTERA_JTAGUART_CONSOLE, +}; + +static int __devinit altera_jtaguart_probe(struct platform_device *pdev) +{ + struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_jtaguart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->ops = &altera_jtaguart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&altera_jtaguart_driver, port); + } + + return 0; +} + +static int __devexit altera_jtaguart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { + port = &altera_jtaguart_ports[i].port; + if (port) + uart_remove_one_port(&altera_jtaguart_driver, port); + } + + return 0; +} + +static struct platform_driver altera_jtaguart_platform_driver = { + .probe = altera_jtaguart_probe, + .remove = __devexit_p(altera_jtaguart_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init altera_jtaguart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_jtaguart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_jtaguart_platform_driver); + if (rc) { + uart_unregister_driver(&altera_jtaguart_driver); + return rc; + } + return 0; +} + +static void __exit altera_jtaguart_exit(void) +{ + platform_driver_unregister(&altera_jtaguart_platform_driver); + uart_unregister_driver(&altera_jtaguart_driver); +} + +module_init(altera_jtaguart_init); +module_exit(altera_jtaguart_exit); + +MODULE_DESCRIPTION("Altera JTAG UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c new file mode 100644 index 0000000..7212162 --- /dev/null +++ b/drivers/tty/serial/altera_uart.c @@ -0,0 +1,608 @@ +/* + * altera_uart.c -- Altera UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_uart" +#define SERIAL_ALTERA_MAJOR 204 +#define SERIAL_ALTERA_MINOR 213 + +/* + * Altera UART register definitions according to the Nios UART datasheet: + * http://www.altera.com/literature/ds/ds_nios_uart.pdf + */ + +#define ALTERA_UART_SIZE 32 + +#define ALTERA_UART_RXDATA_REG 0 +#define ALTERA_UART_TXDATA_REG 4 +#define ALTERA_UART_STATUS_REG 8 +#define ALTERA_UART_CONTROL_REG 12 +#define ALTERA_UART_DIVISOR_REG 16 +#define ALTERA_UART_EOP_REG 20 + +#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ +#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ +#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ +#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ +#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ +#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ +#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ +#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ +#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ +#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ +#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ +#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ + + /* Enable interrupt on... */ +#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ +#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ +#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ +#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ +#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ +#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ +#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ +#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ +#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ + +#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ +#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ +#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ +#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ + +/* + * Local per-uart structure. + */ +struct altera_uart { + struct uart_port port; + struct timer_list tmr; + unsigned int sigs; /* Local copy of line sigs */ + unsigned short imr; /* Local IMR mirror */ +}; + +static u32 altera_uart_readl(struct uart_port *port, int reg) +{ + struct altera_uart_platform_uart *platp = port->private_data; + + return readl(port->membase + (reg << platp->bus_shift)); +} + +static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) +{ + struct altera_uart_platform_uart *platp = port->private_data; + + writel(dat, port->membase + (reg << platp->bus_shift)); +} + +static unsigned int altera_uart_tx_empty(struct uart_port *port) +{ + return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_uart_get_mctrl(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned int sigs; + + sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; + sigs |= (pp->sigs & TIOCM_RTS); + + return sigs; +} + +static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->sigs = sigs; + if (sigs & TIOCM_RTS) + pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_start_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_stop_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_stop_rx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void altera_uart_enable_ms(struct uart_port *port) +{ +} + +static void altera_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; + + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + baudclk = port->uartclk / baud; + + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void altera_uart_rx_chars(struct altera_uart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char ch, flag; + unsigned short status; + + while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & + ALTERA_UART_STATUS_RRDY_MSK) { + ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & ALTERA_UART_STATUS_E_MSK) { + altera_uart_writel(port, status, + ALTERA_UART_STATUS_REG); + + if (status & ALTERA_UART_STATUS_BRK_MSK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & ALTERA_UART_STATUS_PE_MSK) { + port->icount.parity++; + } else if (status & ALTERA_UART_STATUS_ROE_MSK) { + port->icount.overrun++; + } else if (status & ALTERA_UART_STATUS_FE_MSK) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & ALTERA_UART_STATUS_BRK_MSK) + flag = TTY_BREAK; + else if (status & ALTERA_UART_STATUS_PE_MSK) + flag = TTY_PARITY; + else if (status & ALTERA_UART_STATUS_FE_MSK) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, + flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +static void altera_uart_tx_chars(struct altera_uart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK) { + if (xmit->head == xmit->tail) + break; + altera_uart_writel(port, xmit->buf[xmit->tail], + ALTERA_UART_TXDATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); + } +} + +static irqreturn_t altera_uart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned int isr; + + isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; + + spin_lock(&port->lock); + if (isr & ALTERA_UART_STATUS_RRDY_MSK) + altera_uart_rx_chars(pp); + if (isr & ALTERA_UART_STATUS_TRDY_MSK) + altera_uart_tx_chars(pp); + spin_unlock(&port->lock); + + return IRQ_RETVAL(isr); +} + +static void altera_uart_timer(unsigned long data) +{ + struct uart_port *port = (void *)data; + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + altera_uart_interrupt(0, port); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); +} + +static void altera_uart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_UART; + + /* Clear mask, so no surprise interrupts. */ + altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); + /* Clear status register */ + altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); +} + +static int altera_uart_startup(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + int ret; + + if (!port->irq) { + setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); + return 0; + } + + ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; + writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_uart_shutdown(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + if (port->irq) + free_irq(port->irq, port); + else + del_timer_sync(&pp->tmr); +} + +static const char *altera_uart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; +} + +static int altera_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_uart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) + return -EINVAL; + return 0; +} + +/* + * Define the basic serial functions we support. + */ +static struct uart_ops altera_uart_ops = { + .tx_empty = altera_uart_tx_empty, + .get_mctrl = altera_uart_get_mctrl, + .set_mctrl = altera_uart_set_mctrl, + .start_tx = altera_uart_start_tx, + .stop_tx = altera_uart_stop_tx, + .stop_rx = altera_uart_stop_rx, + .enable_ms = altera_uart_enable_ms, + .break_ctl = altera_uart_break_ctl, + .startup = altera_uart_startup, + .shutdown = altera_uart_shutdown, + .set_termios = altera_uart_set_termios, + .type = altera_uart_type, + .request_port = altera_uart_request_port, + .release_port = altera_uart_release_port, + .config_port = altera_uart_config_port, + .verify_port = altera_uart_verify_port, +}; + +static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) + +int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_uart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = platp[i].uartclk; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &altera_uart_ops; + port->private_data = platp; + } + + return 0; +} + +static void altera_uart_console_putc(struct uart_port *port, const char c) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK)) + cpu_relax(); + + writel(c, port->membase + ALTERA_UART_TXDATA_REG); +} + +static void altera_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &(altera_uart_ports + co->index)->port; + + for (; count; count--, s++) { + altera_uart_console_putc(port, *s); + if (*s == '\n') + altera_uart_console_putc(port, '\r'); + } +} + +static int __init altera_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + port = &altera_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver altera_uart_driver; + +static struct console altera_uart_console = { + .name = "ttyAL", + .write = altera_uart_console_write, + .device = uart_console_device, + .setup = altera_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_uart_driver, +}; + +static int __init altera_uart_console_init(void) +{ + register_console(&altera_uart_console); + return 0; +} + +console_initcall(altera_uart_console_init); + +#define ALTERA_UART_CONSOLE (&altera_uart_console) + +#else + +#define ALTERA_UART_CONSOLE NULL + +#endif /* CONFIG_ALTERA_UART_CONSOLE */ + +/* + * Define the altera_uart UART driver structure. + */ +static struct uart_driver altera_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = "ttyAL", + .major = SERIAL_ALTERA_MAJOR, + .minor = SERIAL_ALTERA_MINOR, + .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, + .cons = ALTERA_UART_CONSOLE, +}; + +static int __devinit altera_uart_probe(struct platform_device *pdev) +{ + struct altera_uart_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + struct resource *res_mem; + struct resource *res_irq; + int i = pdev->id; + + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; + + if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + + port = &altera_uart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp->mapbase) + port->mapbase = platp->mapbase; + else + return -EINVAL; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp->irq) + port->irq = platp->irq; + + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->iotype = SERIAL_IO_MEM; + port->uartclk = platp->uartclk; + port->ops = &altera_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->private_data = platp; + + uart_add_one_port(&altera_uart_driver, port); + + return 0; +} + +static int __devexit altera_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = &altera_uart_ports[pdev->id].port; + + uart_remove_one_port(&altera_uart_driver, port); + return 0; +} + +static struct platform_driver altera_uart_platform_driver = { + .probe = altera_uart_probe, + .remove = __devexit_p(altera_uart_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = NULL, + }, +}; + +static int __init altera_uart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_uart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_uart_platform_driver); + if (rc) { + uart_unregister_driver(&altera_uart_driver); + return rc; + } + return 0; +} + +static void __exit altera_uart_exit(void) +{ + platform_driver_unregister(&altera_uart_platform_driver); + uart_unregister_driver(&altera_uart_driver); +} + +module_init(altera_uart_init); +module_exit(altera_uart_exit); + +MODULE_DESCRIPTION("Altera UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c new file mode 100644 index 0000000..2904aa0 --- /dev/null +++ b/drivers/tty/serial/amba-pl010.c @@ -0,0 +1,825 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define UART_NR 8 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 16 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) +#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) + +#define UART_DUMMY_RSR_RX 256 +#define UART_PORT_SIZE 64 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + struct amba_device *dev; + struct amba_pl010_data *data; + unsigned int old_status; +}; + +static void pl010_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_rx_chars(struct uart_amba_port *uap) +{ + struct tty_struct *tty = uap->port.state->port.tty; + unsigned int status, ch, flag, rsr, max_count = 256; + + status = readb(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { + ch = readb(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { + writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + uap->port.icount.parity++; + else if (rsr & UART01x_RSR_FE) + uap->port.icount.frame++; + if (rsr & UART01x_RSR_OE) + uap->port.icount.overrun++; + + rsr &= uap->port.read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch)) + goto ignore_char; + + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: + status = readb(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&uap->port.lock); +} + +static void pl010_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count; + + if (uap->port.x_char) { + writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl010_stop_tx(&uap->port); + return; + } + + count = uap->port.fifosize >> 1; + do { + writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl010_stop_tx(&uap->port); +} + +static void pl010_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + writel(0, uap->port.membase + UART010_ICR); + + status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static irqreturn_t pl010_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&uap->port.lock); + + status = readb(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) + pl010_rx_chars(uap); + if (status & UART010_IIR_MIS) + pl010_modem_status(uap); + if (status & UART010_IIR_TIS) + pl010_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readb(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; + } + + spin_unlock(&uap->port.lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl010_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readb(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl010_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status; + + status = readb(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) + result |= TIOCM_DSR; + if (status & UART01x_FR_CTS) + result |= TIOCM_CTS; + + return result; +} + +static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (uap->data) + uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); +} + +static void pl010_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readb(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl010_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); + if (retval) + goto clk_dis; + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl010_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable all interrupts, disable the port + */ + writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ + writel(readb(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl010_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (uap->port.fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&uap->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + uap->port.read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + uap->port.read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + uap->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + uap->port.ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ + old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + + writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; + writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); + writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writel(lcr_h, uap->port.membase + UART010_LCRH); + writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static void pl010_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + pl010_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + +static const char *pl010_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, + .get_mctrl = pl010_get_mctrl, + .stop_tx = pl010_stop_tx, + .start_tx = pl010_start_tx, + .stop_rx = pl010_stop_rx, + .enable_ms = pl010_enable_ms, + .break_ctl = pl010_break_ctl, + .startup = pl010_startup, + .shutdown = pl010_shutdown, + .set_termios = pl010_set_termios, + .set_ldisc = pl010_set_ldisc, + .type = pl010_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +static void pl010_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status; + + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); + writel(ch, uap->port.membase + UART01x_DR); +} + +static void +pl010_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readb(uap->port.membase + UART010_CR); + writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); + writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); +} + +static void __init +pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; + lcr_h = readb(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + quot = readb(uap->port.membase + UART010_LCRL) | + readb(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init pl010_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl010_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAM", + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE &amba_console +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl010_probe(struct amba_device *dev, struct amba_id *id) +{ + struct uart_amba_port *uap; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (!uap) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, resource_size(&dev->res)); + if (!base) { + ret = -ENOMEM; + goto free; + } + + uap->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = 16; + uap->port.ops = &amba_pl010_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + uap->dev = dev; + uap->data = dev->dev.platform_data; + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl010_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + iounmap(uap->port.membase); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +static int pl010_suspend(struct amba_device *dev, pm_message_t state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_suspend_port(&amba_reg, &uap->port); + + return 0; +} + +static int pl010_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_resume_port(&amba_reg, &uap->port); + + return 0; +} + +static struct amba_id pl010_ids[] = { + { + .id = 0x00041010, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl010_driver = { + .drv = { + .name = "uart-pl010", + }, + .id_table = pl010_ids, + .probe = pl010_probe, + .remove = pl010_remove, + .suspend = pl010_suspend, + .resume = pl010_resume, +}; + +static int __init pl010_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: AMBA driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl010_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl010_exit(void) +{ + amba_driver_unregister(&pl010_driver); + uart_unregister_driver(&amba_reg); +} + +module_init(pl010_init); +module_exit(pl010_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c new file mode 100644 index 0000000..e76d7d0 --- /dev/null +++ b/drivers/tty/serial/amba-pl011.c @@ -0,0 +1,1519 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2010 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define UART_NR 14 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 64 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) +#define UART_DUMMY_DR_RX (1 << 16) + +/* There is by now at least one vendor with differing details, so handle it */ +struct vendor_data { + unsigned int ifls; + unsigned int fifosize; + unsigned int lcrh_tx; + unsigned int lcrh_rx; + bool oversampling; + bool dma_threshold; +}; + +static struct vendor_data vendor_arm = { + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fifosize = 16, + .lcrh_tx = UART011_LCRH, + .lcrh_rx = UART011_LCRH, + .oversampling = false, + .dma_threshold = false, +}; + +static struct vendor_data vendor_st = { + .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fifosize = 64, + .lcrh_tx = ST_UART011_LCRH_TX, + .lcrh_rx = ST_UART011_LCRH_RX, + .oversampling = true, + .dma_threshold = true, +}; + +/* Deals with DMA transactions */ +struct pl011_dmatx_data { + struct dma_chan *chan; + struct scatterlist sg; + char *buf; + bool queued; +}; + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + const struct vendor_data *vendor; + unsigned int dmacr; /* dma control reg */ + unsigned int im; /* interrupt mask */ + unsigned int old_status; + unsigned int fifosize; /* vendor-specific */ + unsigned int lcrh_tx; /* vendor-specific */ + unsigned int lcrh_rx; /* vendor-specific */ + bool autorts; + char type[12]; +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + bool using_dma; + struct pl011_dmatx_data dmatx; +#endif +}; + +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE + +#define PL011_DMA_BUFFER_SIZE PAGE_SIZE + +static void pl011_dma_probe_initcall(struct uart_amba_port *uap) +{ + /* DMA is the sole user of the platform data right now */ + struct amba_pl011_data *plat = uap->port.dev->platform_data; + struct dma_slave_config tx_conf = { + .dst_addr = uap->port.mapbase + UART01x_DR, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .direction = DMA_TO_DEVICE, + .dst_maxburst = uap->fifosize >> 1, + }; + struct dma_chan *chan; + dma_cap_mask_t mask; + + /* We need platform data */ + if (!plat || !plat->dma_filter) { + dev_info(uap->port.dev, "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); + if (!chan) { + dev_err(uap->port.dev, "no TX DMA channel!\n"); + return; + } + + dmaengine_slave_config(chan, &tx_conf); + uap->dmatx.chan = chan; + + dev_info(uap->port.dev, "DMA channel TX %s\n", + dma_chan_name(uap->dmatx.chan)); +} + +#ifndef MODULE +/* + * Stack up the UARTs and let the above initcall be done at device + * initcall time, because the serial driver is called as an arch + * initcall, and at this time the DMA subsystem is not yet registered. + * At this point the driver will switch over to using DMA where desired. + */ +struct dma_uap { + struct list_head node; + struct uart_amba_port *uap; +}; + +static LIST_HEAD(pl011_dma_uarts); + +static int __init pl011_dma_initcall(void) +{ + struct list_head *node, *tmp; + + list_for_each_safe(node, tmp, &pl011_dma_uarts) { + struct dma_uap *dmau = list_entry(node, struct dma_uap, node); + pl011_dma_probe_initcall(dmau->uap); + list_del(node); + kfree(dmau); + } + return 0; +} + +device_initcall(pl011_dma_initcall); + +static void pl011_dma_probe(struct uart_amba_port *uap) +{ + struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); + if (dmau) { + dmau->uap = uap; + list_add_tail(&dmau->node, &pl011_dma_uarts); + } +} +#else +static void pl011_dma_probe(struct uart_amba_port *uap) +{ + pl011_dma_probe_initcall(uap); +} +#endif + +static void pl011_dma_remove(struct uart_amba_port *uap) +{ + /* TODO: remove the initcall if it has not yet executed */ + if (uap->dmatx.chan) + dma_release_channel(uap->dmatx.chan); +} + + +/* Forward declare this for the refill routine */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap); + +/* + * The current DMA TX buffer has been sent. + * Try to queue up another DMA buffer. + */ +static void pl011_dma_tx_callback(void *data) +{ + struct uart_amba_port *uap = data; + struct pl011_dmatx_data *dmatx = &uap->dmatx; + unsigned long flags; + u16 dmacr; + + spin_lock_irqsave(&uap->port.lock, flags); + if (uap->dmatx.queued) + dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1, + DMA_TO_DEVICE); + + dmacr = uap->dmacr; + uap->dmacr = dmacr & ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + /* + * If TX DMA was disabled, it means that we've stopped the DMA for + * some reason (eg, XOFF received, or we want to send an X-char.) + * + * Note: we need to be careful here of a potential race between DMA + * and the rest of the driver - if the driver disables TX DMA while + * a TX buffer completing, we must update the tx queued status to + * get further refills (hence we check dmacr). + */ + if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) || + uart_circ_empty(&uap->port.state->xmit)) { + uap->dmatx.queued = false; + spin_unlock_irqrestore(&uap->port.lock, flags); + return; + } + + if (pl011_dma_tx_refill(uap) <= 0) { + /* + * We didn't queue a DMA buffer for some reason, but we + * have data pending to be sent. Re-enable the TX IRQ. + */ + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Try to refill the TX DMA buffer. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * 1 if we queued up a TX DMA buffer. + * 0 if we didn't want to handle this by DMA + * <0 on error + */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap) +{ + struct pl011_dmatx_data *dmatx = &uap->dmatx; + struct dma_chan *chan = dmatx->chan; + struct dma_device *dma_dev = chan->device; + struct dma_async_tx_descriptor *desc; + struct circ_buf *xmit = &uap->port.state->xmit; + unsigned int count; + + /* + * Try to avoid the overhead involved in using DMA if the + * transaction fits in the first half of the FIFO, by using + * the standard interrupt handling. This ensures that we + * issue a uart_write_wakeup() at the appropriate time. + */ + count = uart_circ_chars_pending(xmit); + if (count < (uap->fifosize >> 1)) { + uap->dmatx.queued = false; + return 0; + } + + /* + * Bodge: don't send the last character by DMA, as this + * will prevent XON from notifying us to restart DMA. + */ + count -= 1; + + /* Else proceed to copy the TX chars to the DMA buffer and fire DMA */ + if (count > PL011_DMA_BUFFER_SIZE) + count = PL011_DMA_BUFFER_SIZE; + + if (xmit->tail < xmit->head) + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); + else { + size_t first = UART_XMIT_SIZE - xmit->tail; + size_t second = xmit->head; + + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first); + if (second) + memcpy(&dmatx->buf[first], &xmit->buf[0], second); + } + + dmatx->sg.length = count; + + if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) { + uap->dmatx.queued = false; + dev_dbg(uap->port.dev, "unable to map TX DMA\n"); + return -EBUSY; + } + + desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); + uap->dmatx.queued = false; + /* + * If DMA cannot be used right now, we complete this + * transaction via IRQ and let the TTY layer retry. + */ + dev_dbg(uap->port.dev, "TX DMA busy\n"); + return -EBUSY; + } + + /* Some data to go along to the callback */ + desc->callback = pl011_dma_tx_callback; + desc->callback_param = uap; + + /* All errors should happen at prepare time */ + dmaengine_submit(desc); + + /* Fire the DMA transaction */ + dma_dev->device_issue_pending(chan); + + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->dmatx.queued = true; + + /* + * Now we know that DMA will fire, so advance the ring buffer + * with the stuff we just dispatched. + */ + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx += count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return 1; +} + +/* + * We received a transmit interrupt without a pending X-char but with + * pending characters. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want to use PIO to transmit + * true if we queued a DMA buffer + */ +static bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + if (!uap->using_dma) + return false; + + /* + * If we already have a TX buffer queued, but received a + * TX interrupt, it will be because we've just sent an X-char. + * Ensure the TX DMA is enabled and the TX IRQ is disabled. + */ + if (uap->dmatx.queued) { + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + return true; + } + + /* + * We don't have a TX buffer queued, so try to queue one. + * If we succesfully queued a buffer, mask the TX IRQ. + */ + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + return true; + } + return false; +} + +/* + * Stop the DMA transmit (eg, due to received XOFF). + * Locking: called with port lock held and IRQs disabled. + */ +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ + if (uap->dmatx.queued) { + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + } +} + +/* + * Try to start a DMA transmit, or in the case of an XON/OFF + * character queued for send, try to get that character out ASAP. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want the TX IRQ to be enabled + * true if we have a buffer queued + */ +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + u16 dmacr; + + if (!uap->using_dma) + return false; + + if (!uap->port.x_char) { + /* no X-char, try to push chars out in DMA mode */ + bool ret = true; + + if (!uap->dmatx.queued) { + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + ret = true; + } else { + uap->im |= UART011_TXIM; + ret = false; + } + writew(uap->im, uap->port.membase + UART011_IMSC); + } else if (!(uap->dmacr & UART011_TXDMAE)) { + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, + uap->port.membase + UART011_DMACR); + } + return ret; + } + + /* + * We have an X-char to send. Disable DMA to prevent it loading + * the TX fifo, and then see if we can stuff it into the FIFO. + */ + dmacr = uap->dmacr; + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { + /* + * No space in the FIFO, so enable the transmit interrupt + * so we know when there is space. Note that once we've + * loaded the character, we should just re-enable DMA. + */ + return false; + } + + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + + /* Success - restore the DMA state */ + uap->dmacr = dmacr; + writew(dmacr, uap->port.membase + UART011_DMACR); + + return true; +} + +/* + * Flush the transmit buffer. + * Locking: called with port lock held and IRQs disabled. + */ +static void pl011_dma_flush_buffer(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (!uap->using_dma) + return; + + /* Avoid deadlock with the DMA engine callback */ + spin_unlock(&uap->port.lock); + dmaengine_terminate_all(uap->dmatx.chan); + spin_lock(&uap->port.lock); + if (uap->dmatx.queued) { + dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + } +} + + +static void pl011_dma_startup(struct uart_amba_port *uap) +{ + if (!uap->dmatx.chan) + return; + + uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); + if (!uap->dmatx.buf) { + dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); + uap->port.fifosize = uap->fifosize; + return; + } + + sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE); + + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + uap->port.fifosize = PL011_DMA_BUFFER_SIZE; + uap->using_dma = true; + + /* Turn on DMA error (RX/TX will be enabled on demand) */ + uap->dmacr |= UART011_DMAONERR; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + /* + * ST Micro variants has some specific dma burst threshold + * compensation. Set this to 16 bytes, so burst will only + * be issued above/below 16 bytes. + */ + if (uap->vendor->dma_threshold) + writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap->port.membase + ST_UART011_DMAWM); +} + +static void pl011_dma_shutdown(struct uart_amba_port *uap) +{ + if (!uap->using_dma) + return; + + /* Disable RX and TX DMA */ + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + spin_lock_irq(&uap->port.lock); + uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + spin_unlock_irq(&uap->port.lock); + + /* In theory, this should already be done by pl011_dma_flush_buffer */ + dmaengine_terminate_all(uap->dmatx.chan); + if (uap->dmatx.queued) { + dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + } + + kfree(uap->dmatx.buf); + + uap->using_dma = false; +} + +#else +/* Blank functions if the DMA engine is not available */ +static inline void pl011_dma_probe(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_remove(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_startup(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_shutdown(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + return false; +} + +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + return false; +} + +#define pl011_dma_flush_buffer NULL +#endif + + +static void pl011_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_dma_tx_stop(uap); +} + +static void pl011_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (!pl011_dma_tx_start(uap)) { + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } +} + +static void pl011_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| + UART011_PEIM|UART011_BEIM|UART011_OEIM); + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_rx_chars(struct uart_amba_port *uap) +{ + struct tty_struct *tty = uap->port.state->port.tty; + unsigned int status, ch, flag, max_count = 256; + + status = readw(uap->port.membase + UART01x_FR); + while ((status & UART01x_FR_RXFE) == 0 && max_count--) { + ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; + flag = TTY_NORMAL; + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (ch & UART011_DR_PE) + uap->port.icount.parity++; + else if (ch & UART011_DR_FE) + uap->port.icount.frame++; + if (ch & UART011_DR_OE) + uap->port.icount.overrun++; + + ch &= uap->port.read_status_mask; + + if (ch & UART011_DR_BE) + flag = TTY_BREAK; + else if (ch & UART011_DR_PE) + flag = TTY_PARITY; + else if (ch & UART011_DR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch & 255)) + goto ignore_char; + + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); + + ignore_char: + status = readw(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&uap->port.lock); +} + +static void pl011_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count; + + if (uap->port.x_char) { + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl011_stop_tx(&uap->port); + return; + } + + /* If we are using DMA mode, try to send some characters. */ + if (pl011_dma_tx_irq(uap)) + return; + + count = uap->fifosize >> 1; + do { + writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl011_stop_tx(&uap->port); +} + +static void pl011_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static irqreturn_t pl011_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned long flags; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock_irqsave(&uap->port.lock, flags); + + status = readw(uap->port.membase + UART011_MIS); + if (status) { + do { + writew(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap->port.membase + UART011_ICR); + + if (status & (UART011_RTIS|UART011_RXIS)) + pl011_rx_chars(uap); + if (status & (UART011_DSRMIS|UART011_DCDMIS| + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) + pl011_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readw(uap->port.membase + UART011_MIS); + } while (status != 0); + handled = 1; + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl01x_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readw(uap->port.membase + UART01x_FR); + return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl01x_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status = readw(uap->port.membase + UART01x_FR); + +#define TIOCMBIT(uartbit, tiocmbit) \ + if (status & uartbit) \ + result |= tiocmbit + + TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); + TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); + TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); + TIOCMBIT(UART011_FR_RI, TIOCM_RNG); +#undef TIOCMBIT + return result; +} + +static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readw(uap->port.membase + UART011_CR); + +#define TIOCMBIT(tiocmbit, uartbit) \ + if (mctrl & tiocmbit) \ + cr |= uartbit; \ + else \ + cr &= ~uartbit + + TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); + TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); + TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); + TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); + TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + + if (uap->autorts) { + /* We need to disable auto-RTS if we want to turn RTS off */ + TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + } +#undef TIOCMBIT + + writew(cr, uap->port.membase + UART011_CR); +} + +static void pl011_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writew(lcr_h, uap->port.membase + uap->lcrh_tx); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +#ifdef CONFIG_CONSOLE_POLL +static int pl010_get_poll_char(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status; + + status = readw(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_RXFE) + return NO_POLL_CHAR; + + return readw(uap->port.membase + UART01x_DR); +} + +static void pl010_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writew(ch, uap->port.membase + UART01x_DR); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int pl011_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); + if (retval) + goto clk_dis; + + writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + + /* + * Provoke TX FIFO interrupt into asserting. + */ + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; + writew(cr, uap->port.membase + UART011_CR); + writew(0, uap->port.membase + UART011_FBRD); + writew(1, uap->port.membase + UART011_IBRD); + writew(0, uap->port.membase + uap->lcrh_rx); + if (uap->lcrh_tx != uap->lcrh_rx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(0, uap->port.membase + uap->lcrh_tx); + } + writew(0, uap->port.membase + UART01x_DR); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); + + /* Clear pending error interrupts */ + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, + uap->port.membase + UART011_ICR); + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* Startup DMA */ + pl011_dma_startup(uap); + + /* + * Finally, enable interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = UART011_RXIM | UART011_RTIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + spin_unlock_irq(&uap->port.lock); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl011_shutdown_channel(struct uart_amba_port *uap, + unsigned int lcrh) +{ + unsigned long val; + + val = readw(uap->port.membase + lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + lcrh); +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + /* + * disable all interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = 0; + writew(uap->im, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + spin_unlock_irq(&uap->port.lock); + + pl011_dma_shutdown(uap); + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable the port + */ + uap->autorts = false; + writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + + /* + * disable break condition and fifos + */ + pl011_shutdown_channel(uap, uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) + pl011_shutdown_channel(uap, uap->lcrh_tx); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl011_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot, clkdiv; + + if (uap->vendor->oversampling) + clkdiv = 8; + else + clkdiv = 16; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / clkdiv); + + if (baud > port->uartclk/16) + quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); + else + quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (uap->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART011_DR_OE | 255; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART011_DR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART011_DR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_DR_RX; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + pl011_enable_ms(port); + + /* first, disable everything */ + old_cr = readw(port->membase + UART011_CR); + writew(0, port->membase + UART011_CR); + + if (termios->c_cflag & CRTSCTS) { + if (old_cr & UART011_CR_RTS) + old_cr |= UART011_CR_RTSEN; + + old_cr |= UART011_CR_CTSEN; + uap->autorts = true; + } else { + old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); + uap->autorts = false; + } + + if (uap->vendor->oversampling) { + if (baud > port->uartclk / 16) + old_cr |= ST_UART011_CR_OVSFACT; + else + old_cr &= ~ST_UART011_CR_OVSFACT; + } + + /* Set baud rate */ + writew(quot & 0x3f, port->membase + UART011_FBRD); + writew(quot >> 6, port->membase + UART011_IBRD); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writew(lcr_h, port->membase + uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(lcr_h, port->membase + uap->lcrh_tx); + } + writew(old_cr, port->membase + UART011_CR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl011_type(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + return uap->port.type == PORT_AMBA ? uap->type : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SZ_4K); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl011_pops = { + .tx_empty = pl01x_tx_empty, + .set_mctrl = pl011_set_mctrl, + .get_mctrl = pl01x_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, + .shutdown = pl011_shutdown, + .flush_buffer = pl011_dma_flush_buffer, + .set_termios = pl011_set_termios, + .type = pl011_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pl010_get_poll_char, + .poll_put_char = pl010_put_poll_char, +#endif +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE + +static void pl011_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + writew(ch, uap->port.membase + UART01x_DR); +} + +static void +pl011_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr, new_cr; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readw(uap->port.membase + UART011_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(new_cr, uap->port.membase + UART011_CR); + + uart_console_write(&uap->port, s, count, pl011_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_BUSY); + writew(old_cr, uap->port.membase + UART011_CR); + + clk_disable(uap->clk); +} + +static void __init +pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, ibrd, fbrd; + + lcr_h = readw(uap->port.membase + uap->lcrh_tx); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + ibrd = readw(uap->port.membase + UART011_IBRD); + fbrd = readw(uap->port.membase + UART011_FBRD); + + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + + if (uap->vendor->oversampling) { + if (readw(uap->port.membase + UART011_CR) + & ST_UART011_CR_OVSFACT) + *baud *= 2; + } + } +} + +static int __init pl011_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAMA", + .write = pl011_console_write, + .device = uart_console_device, + .setup = pl011_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE (&amba_console) +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAMA", + .dev_name = "ttyAMA", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl011_probe(struct amba_device *dev, struct amba_id *id) +{ + struct uart_amba_port *uap; + struct vendor_data *vendor = id->data; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (uap == NULL) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, resource_size(&dev->res)); + if (!base) { + ret = -ENOMEM; + goto free; + } + + uap->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + uap->vendor = vendor; + uap->lcrh_rx = vendor->lcrh_rx; + uap->lcrh_tx = vendor->lcrh_tx; + uap->fifosize = vendor->fifosize; + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = uap->fifosize; + uap->port.ops = &amba_pl011_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + pl011_dma_probe(uap); + + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + pl011_dma_remove(uap); + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl011_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + pl011_dma_remove(uap); + iounmap(uap->port.membase); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +#ifdef CONFIG_PM +static int pl011_suspend(struct amba_device *dev, pm_message_t state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_suspend_port(&amba_reg, &uap->port); +} + +static int pl011_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_resume_port(&amba_reg, &uap->port); +} +#endif + +static struct amba_id pl011_ids[] = { + { + .id = 0x00041011, + .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + .id = 0x00380802, + .mask = 0x00ffffff, + .data = &vendor_st, + }, + { 0, 0 }, +}; + +static struct amba_driver pl011_driver = { + .drv = { + .name = "uart-pl011", + }, + .id_table = pl011_ids, + .probe = pl011_probe, + .remove = pl011_remove, +#ifdef CONFIG_PM + .suspend = pl011_suspend, + .resume = pl011_resume, +#endif +}; + +static int __init pl011_init(void) +{ + int ret; + printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl011_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl011_exit(void) +{ + amba_driver_unregister(&pl011_driver); + uart_unregister_driver(&amba_reg); +} + +/* + * While this can be a module, if builtin it's most likely the console + * So let's leave module_exit but move module_init to an earlier place + */ +arch_initcall(pl011_init); +module_exit(pl011_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c new file mode 100644 index 0000000..095a5d5 --- /dev/null +++ b/drivers/tty/serial/apbuart.c @@ -0,0 +1,709 @@ +/* + * Driver for GRLIB serial ports (APBUART) + * + * Based on linux/drivers/serial/amba.c + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2003 Konrad Eisele + * Copyright (C) 2006 Daniel Hellstrom , Aeroflex Gaisler AB + * Copyright (C) 2008 Gilead Kutnick + * Copyright (C) 2009 Kristoffer Glembo , Aeroflex Gaisler AB + */ + +#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "apbuart.h" + +#define SERIAL_APBUART_MAJOR TTY_MAJOR +#define SERIAL_APBUART_MINOR 64 +#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */ + +static void apbuart_tx_chars(struct uart_port *port); + +static void apbuart_stop_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~UART_CTRL_TI; + UART_PUT_CTRL(port, cr); +} + +static void apbuart_start_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr |= UART_CTRL_TI; + UART_PUT_CTRL(port, cr); + + if (UART_GET_STATUS(port) & UART_STATUS_THE) + apbuart_tx_chars(port); +} + +static void apbuart_stop_rx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_RI); + UART_PUT_CTRL(port, cr); +} + +static void apbuart_enable_ms(struct uart_port *port) +{ + /* No modem status change interrupts for APBUART */ +} + +static void apbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, rsr, flag; + unsigned int max_chars = port->fifosize; + + status = UART_GET_STATUS(port); + + while (UART_RX_DATA(status) && (max_chars--)) { + + ch = UART_GET_CHAR(port); + flag = TTY_NORMAL; + + port->icount.rx++; + + rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; + UART_PUT_STATUS(port, 0); + if (rsr & UART_STATUS_ERR) { + + if (rsr & UART_STATUS_BR) { + rsr &= ~(UART_STATUS_FE | UART_STATUS_PE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rsr & UART_STATUS_PE) { + port->icount.parity++; + } else if (rsr & UART_STATUS_FE) { + port->icount.frame++; + } + if (rsr & UART_STATUS_OE) + port->icount.overrun++; + + rsr &= port->read_status_mask; + + if (rsr & UART_STATUS_PE) + flag = TTY_PARITY; + else if (rsr & UART_STATUS_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag); + + + ignore_char: + status = UART_GET_STATUS(port); + } + + tty_flip_buffer_push(tty); +} + +static void apbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + apbuart_stop_tx(port); + return; + } + + /* amba: fill FIFO */ + count = port->fifosize >> 1; + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + apbuart_stop_tx(port); +} + +static irqreturn_t apbuart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + spin_lock(&port->lock); + + status = UART_GET_STATUS(port); + if (status & UART_STATUS_DR) + apbuart_rx_chars(port); + if (status & UART_STATUS_THE) + apbuart_tx_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int apbuart_tx_empty(struct uart_port *port) +{ + unsigned int status = UART_GET_STATUS(port); + return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; +} + +static unsigned int apbuart_get_mctrl(struct uart_port *port) +{ + /* The GRLIB APBUART handles flow control in hardware */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* The GRLIB APBUART handles flow control in hardware */ +} + +static void apbuart_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support sending break */ +} + +static int apbuart_startup(struct uart_port *port) +{ + int retval; + unsigned int cr; + + /* Allocate the IRQ */ + retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port); + if (retval) + return retval; + + /* Finally, enable interrupts */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr | UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI); + + return 0; +} + +static void apbuart_shutdown(struct uart_port *port) +{ + unsigned int cr; + + /* disable all interrupts, disable the port */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr & ~(UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI)); + + /* Free the interrupt */ + free_irq(port->irq, port); +} + +static void apbuart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int cr; + unsigned long flags; + unsigned int baud, quot; + + /* Ask the core to calculate the divisor for us. */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud == 0) + panic("invalid baudrate %i\n", port->uartclk / 16); + + /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */ + quot = (uart_get_divisor(port, baud)) * 2; + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_PE | UART_CTRL_PS); + + if (termios->c_cflag & PARENB) { + cr |= UART_CTRL_PE; + if ((termios->c_cflag & PARODD)) + cr |= UART_CTRL_PS; + } + + /* Enable flow control. */ + if (termios->c_cflag & CRTSCTS) + cr |= UART_CTRL_FL; + + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_STATUS_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Ignore all characters if CREAD is not set. */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* Set baud rate */ + quot -= 1; + UART_PUT_SCAL(port, quot); + UART_PUT_CTRL(port, cr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *apbuart_type(struct uart_port *port) +{ + return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL; +} + +static void apbuart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 0x100); +} + +static int apbuart_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 0x100, "grlib-apbuart") + != NULL ? 0 : -EBUSY; + return 0; +} + +/* Configure/autoconfigure the port */ +static void apbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_APBUART; + apbuart_request_port(port); + } +} + +/* Verify the new serial_struct (for TIOCSSERIAL) */ +static int apbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops grlib_apbuart_ops = { + .tx_empty = apbuart_tx_empty, + .set_mctrl = apbuart_set_mctrl, + .get_mctrl = apbuart_get_mctrl, + .stop_tx = apbuart_stop_tx, + .start_tx = apbuart_start_tx, + .stop_rx = apbuart_stop_rx, + .enable_ms = apbuart_enable_ms, + .break_ctl = apbuart_break_ctl, + .startup = apbuart_startup, + .shutdown = apbuart_shutdown, + .set_termios = apbuart_set_termios, + .type = apbuart_type, + .release_port = apbuart_release_port, + .request_port = apbuart_request_port, + .config_port = apbuart_config_port, + .verify_port = apbuart_verify_port, +}; + +static struct uart_port grlib_apbuart_ports[UART_NR]; +static struct device_node *grlib_apbuart_nodes[UART_NR]; + +static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber) +{ + int ctrl, loop = 0; + int status; + int fifosize; + unsigned long flags; + + ctrl = UART_GET_CTRL(port); + + /* + * Enable the transceiver and wait for it to be ready to send data. + * Clear interrupts so that this process will not be externally + * interrupted in the middle (which can cause the transceiver to + * drain prematurely). + */ + + local_irq_save(flags); + + UART_PUT_CTRL(port, ctrl | UART_CTRL_TE); + + while (!UART_TX_READY(UART_GET_STATUS(port))) + loop++; + + /* + * Disable the transceiver so data isn't actually sent during the + * actual test. + */ + + UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE)); + + fifosize = 1; + UART_PUT_CHAR(port, 0); + + /* + * So long as transmitting a character increments the tranceivier FIFO + * length the FIFO must be at least that big. These bytes will + * automatically drain off of the FIFO. + */ + + status = UART_GET_STATUS(port); + while (((status >> 20) & 0x3F) == fifosize) { + fifosize++; + UART_PUT_CHAR(port, 0); + status = UART_GET_STATUS(port); + } + + fifosize--; + + UART_PUT_CTRL(port, ctrl); + local_irq_restore(flags); + + if (fifosize == 0) + fifosize = 1; + + return fifosize; +} + +static void apbuart_flush_fifo(struct uart_port *port) +{ + int i; + + for (i = 0; i < port->fifosize; i++) + UART_GET_CHAR(port); +} + + +/* ======================================================================== */ +/* Console driver, if enabled */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + +static void apbuart_console_putchar(struct uart_port *port, int ch) +{ + unsigned int status; + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, ch); +} + +static void +apbuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &grlib_apbuart_ports[co->index]; + unsigned int status, old_cr, new_cr; + + /* First save the CR then disable the interrupts */ + old_cr = UART_GET_CTRL(port); + new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI); + UART_PUT_CTRL(port, new_cr); + + uart_console_write(port, s, count, apbuart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CTRL(port, old_cr); +} + +static void __init +apbuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) { + + unsigned int quot, status; + status = UART_GET_STATUS(port); + + *parity = 'n'; + if (status & UART_CTRL_PE) { + if ((status & UART_CTRL_PS) == 0) + *parity = 'e'; + else + *parity = 'o'; + } + + *bits = 8; + quot = UART_GET_SCAL(port) / 8; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init apbuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= grlib_apbuart_port_nr) + co->index = 0; + + port = &grlib_apbuart_ports[co->index]; + + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + apbuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver grlib_apbuart_driver; + +static struct console grlib_apbuart_console = { + .name = "ttyS", + .write = apbuart_console_write, + .device = uart_console_device, + .setup = apbuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &grlib_apbuart_driver, +}; + + +static int grlib_apbuart_configure(void); + +static int __init apbuart_console_init(void) +{ + if (grlib_apbuart_configure()) + return -ENODEV; + register_console(&grlib_apbuart_console); + return 0; +} + +console_initcall(apbuart_console_init); + +#define APBUART_CONSOLE (&grlib_apbuart_console) +#else +#define APBUART_CONSOLE NULL +#endif + +static struct uart_driver grlib_apbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = SERIAL_APBUART_MAJOR, + .minor = SERIAL_APBUART_MINOR, + .nr = UART_NR, + .cons = APBUART_CONSOLE, +}; + + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static int __devinit apbuart_probe(struct platform_device *op, + const struct of_device_id *match) +{ + int i = -1; + struct uart_port *port = NULL; + + i = 0; + for (i = 0; i < grlib_apbuart_port_nr; i++) { + if (op->dev.of_node == grlib_apbuart_nodes[i]) + break; + } + + port = &grlib_apbuart_ports[i]; + port->dev = &op->dev; + + uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port); + + apbuart_flush_fifo((struct uart_port *) port); + + printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", + (unsigned long long) port->mapbase, port->irq); + return 0; +} + +static struct of_device_id __initdata apbuart_match[] = { + { + .name = "GAISLER_APBUART", + }, + { + .name = "01_00c", + }, + {}, +}; + +static struct of_platform_driver grlib_apbuart_of_driver = { + .probe = apbuart_probe, + .driver = { + .owner = THIS_MODULE, + .name = "grlib-apbuart", + .of_match_table = apbuart_match, + }, +}; + + +static int grlib_apbuart_configure(void) +{ + struct device_node *np, *rp; + const u32 *prop; + int freq_khz, line = 0; + + /* Get bus frequency */ + rp = of_find_node_by_path("/"); + if (!rp) + return -ENODEV; + rp = of_get_next_child(rp, NULL); + if (!rp) + return -ENODEV; + prop = of_get_property(rp, "clock-frequency", NULL); + if (!prop) + return -ENODEV; + freq_khz = *prop; + + for_each_matching_node(np, apbuart_match) { + const int *irqs, *ampopts; + const struct amba_prom_registers *regs; + struct uart_port *port; + unsigned long addr; + + ampopts = of_get_property(np, "ampopts", NULL); + if (ampopts && (*ampopts == 0)) + continue; /* Ignore if used by another OS instance */ + + irqs = of_get_property(np, "interrupts", NULL); + regs = of_get_property(np, "reg", NULL); + + if (!irqs || !regs) + continue; + + grlib_apbuart_nodes[line] = np; + + addr = regs->phys_addr; + + port = &grlib_apbuart_ports[line]; + + port->mapbase = addr; + port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); + port->irq = *irqs; + port->iotype = UPIO_MEM; + port->ops = &grlib_apbuart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = line; + port->uartclk = freq_khz * 1000; + port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); + line++; + + /* We support maximum UART_NR uarts ... */ + if (line == UART_NR) + break; + } + + grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line; + return line ? 0 : -ENODEV; +} + +static int __init grlib_apbuart_init(void) +{ + int ret; + + /* Find all APBUARTS in device the tree and initialize their ports */ + ret = grlib_apbuart_configure(); + if (ret) + return ret; + + printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); + + ret = uart_register_driver(&grlib_apbuart_driver); + + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + ret = of_register_platform_driver(&grlib_apbuart_of_driver); + if (ret) { + printk(KERN_ERR + "%s: of_register_platform_driver failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&grlib_apbuart_driver); + return ret; + } + + return ret; +} + +static void __exit grlib_apbuart_exit(void) +{ + int i; + + for (i = 0; i < grlib_apbuart_port_nr; i++) + uart_remove_one_port(&grlib_apbuart_driver, + &grlib_apbuart_ports[i]); + + uart_unregister_driver(&grlib_apbuart_driver); + of_unregister_platform_driver(&grlib_apbuart_of_driver); +} + +module_init(grlib_apbuart_init); +module_exit(grlib_apbuart_exit); + +MODULE_AUTHOR("Aeroflex Gaisler AB"); +MODULE_DESCRIPTION("GRLIB APBUART serial driver"); +MODULE_VERSION("2.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/apbuart.h b/drivers/tty/serial/apbuart.h new file mode 100644 index 0000000..5faf87c --- /dev/null +++ b/drivers/tty/serial/apbuart.h @@ -0,0 +1,64 @@ +#ifndef __GRLIB_APBUART_H__ +#define __GRLIB_APBUART_H__ + +#include + +#define UART_NR 8 +static int grlib_apbuart_port_nr; + +struct grlib_apbuart_regs_map { + u32 data; + u32 status; + u32 ctrl; + u32 scaler; +}; + +struct amba_prom_registers { + unsigned int phys_addr; + unsigned int reg_size; +}; + +/* + * The following defines the bits in the APBUART Status Registers. + */ +#define UART_STATUS_DR 0x00000001 /* Data Ready */ +#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ +#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ +#define UART_STATUS_BR 0x00000008 /* Break Error */ +#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */ +#define UART_STATUS_PE 0x00000020 /* RX Parity Error */ +#define UART_STATUS_FE 0x00000040 /* RX Framing Error */ +#define UART_STATUS_ERR 0x00000078 /* Error Mask */ + +/* + * The following defines the bits in the APBUART Ctrl Registers. + */ +#define UART_CTRL_RE 0x00000001 /* Receiver enable */ +#define UART_CTRL_TE 0x00000002 /* Transmitter enable */ +#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */ +#define UART_CTRL_TI 0x00000008 /* Transmitter irq */ +#define UART_CTRL_PS 0x00000010 /* Parity select */ +#define UART_CTRL_PE 0x00000020 /* Parity enable */ +#define UART_CTRL_FL 0x00000040 /* Flow control enable */ +#define UART_CTRL_LB 0x00000080 /* Loopback enable */ + +#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase)) + +#define APBBASE_DATA_P(port) (&(APBBASE(port)->data)) +#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status)) +#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl)) +#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler)) + +#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port))) +#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port))) +#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port))) +#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port))) +#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port))) +#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port))) +#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port))) +#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port))) + +#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0) +#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0) + +#endif /* __GRLIB_APBUART_H__ */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c new file mode 100644 index 0000000..3892666 --- /dev/null +++ b/drivers/tty/serial/atmel_serial.c @@ -0,0 +1,1808 @@ +/* + * linux/drivers/char/atmel_serial.c + * + * Driver for Atmel AT91 / AT32 Serial ports + * Copyright (C) 2003 Rick Bronson + * + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * DMA support added by Chip Coldwell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifdef CONFIG_ARM +#include +#include +#endif + +#define PDC_BUFFER_SIZE 512 +/* Revisit: We should calculate this based on the actual port settings */ +#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ + +#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +static void atmel_start_rx(struct uart_port *port); +static void atmel_stop_rx(struct uart_port *port); + +#ifdef CONFIG_SERIAL_ATMEL_TTYAT + +/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we + * should coexist with the 8250 driver, such as if we have an external 16C550 + * UART. */ +#define SERIAL_ATMEL_MAJOR 204 +#define MINOR_START 154 +#define ATMEL_DEVICENAME "ttyAT" + +#else + +/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port + * name, but it is legally reserved for the 8250 driver. */ +#define SERIAL_ATMEL_MAJOR TTY_MAJOR +#define MINOR_START 64 +#define ATMEL_DEVICENAME "ttyS" + +#endif + +#define ATMEL_ISR_PASS_LIMIT 256 + +/* UART registers. CR is write-only, hence no GET macro */ +#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR) +#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) +#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR) +#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER) +#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) +#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) +#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) +#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) +#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR) +#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) +#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) +#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) +#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) + + /* PDC registers */ +#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) +#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) + +#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) +#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) +#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) +#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) +#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) + +#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) +#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) +#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) + +static int (*atmel_open_hook)(struct uart_port *); +static void (*atmel_close_hook)(struct uart_port *); + +struct atmel_dma_buffer { + unsigned char *buf; + dma_addr_t dma_addr; + unsigned int dma_size; + unsigned int ofs; +}; + +struct atmel_uart_char { + u16 status; + u16 ch; +}; + +#define ATMEL_SERIAL_RINGSIZE 1024 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct atmel_uart_port { + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ + u32 backup_imr; /* IMR saved during suspend */ + int break_active; /* break being received */ + + short use_dma_rx; /* enable PDC receiver */ + short pdc_rx_idx; /* current PDC RX buffer */ + struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ + + short use_dma_tx; /* enable PDC transmitter */ + struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + + struct tasklet_struct tasklet; + unsigned int irq_status; + unsigned int irq_status_prev; + + struct circ_buf rx_ring; + + struct serial_rs485 rs485; /* rs485 settings */ + unsigned int tx_done_mask; +}; + +static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; + +#ifdef SUPPORT_SYSRQ +static struct console atmel_console; +#endif + +static inline struct atmel_uart_port * +to_atmel_uart_port(struct uart_port *uart) +{ + return container_of(uart, struct atmel_uart_port, uart); +} + +#ifdef CONFIG_SERIAL_ATMEL_PDC +static bool atmel_use_dma_rx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_rx; +} + +static bool atmel_use_dma_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_tx; +} +#else +static bool atmel_use_dma_rx(struct uart_port *port) +{ + return false; +} + +static bool atmel_use_dma_tx(struct uart_port *port) +{ + return false; +} +#endif + +/* Enable or disable the rs485 support */ +void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + + spin_lock(&port->lock); + + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + mode = UART_GET_MR(port); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + atmel_port->rs485 = *rs485conf; + + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + if (atmel_use_dma_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + UART_PUT_MR(port, mode); + + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + + spin_unlock(&port->lock); + +} + +/* + * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. + */ +static u_int atmel_tx_empty(struct uart_port *port) +{ + return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0; +} + +/* + * Set state of the modem control output lines + */ +static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int control = 0; + unsigned int mode; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + +#ifdef CONFIG_ARCH_AT91RM9200 + if (cpu_is_at91rm9200()) { + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin manually. + */ + if (port->mapbase == AT91RM9200_BASE_US0) { + if (mctrl & TIOCM_RTS) + at91_set_gpio_value(AT91_PIN_PA21, 0); + else + at91_set_gpio_value(AT91_PIN_PA21, 1); + } + } +#endif + + if (mctrl & TIOCM_RTS) + control |= ATMEL_US_RTSEN; + else + control |= ATMEL_US_RTSDIS; + + if (mctrl & TIOCM_DTR) + control |= ATMEL_US_DTREN; + else + control |= ATMEL_US_DTRDIS; + + UART_PUT_CR(port, control); + + /* Local loopback mode? */ + mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; + if (mctrl & TIOCM_LOOP) + mode |= ATMEL_US_CHMODE_LOC_LOOP; + else + mode |= ATMEL_US_CHMODE_NORMAL; + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + UART_PUT_MR(port, mode); +} + +/* + * Get state of the modem control input lines + */ +static u_int atmel_get_mctrl(struct uart_port *port) +{ + unsigned int status, ret = 0; + + status = UART_GET_CSR(port); + + /* + * The control signals are active low. + */ + if (!(status & ATMEL_US_DCD)) + ret |= TIOCM_CD; + if (!(status & ATMEL_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & ATMEL_US_DSR)) + ret |= TIOCM_DSR; + if (!(status & ATMEL_US_RI)) + ret |= TIOCM_RI; + + return ret; +} + +/* + * Stop transmitting. + */ +static void atmel_stop_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + /* disable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + } + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_start_rx(port); +} + +/* + * Start transmitting. + */ +static void atmel_start_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) + /* The transmitter is already running. Yes, we + really need this.*/ + return; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_stop_rx(port); + + /* re-enable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + } + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * start receiving - port is in process of being opened. + */ +static void atmel_start_rx(struct uart_port *port) +{ + UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + + if (atmel_use_dma_rx(port)) { + /* enable PDC controller */ + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + UART_PUT_IER(port, ATMEL_US_RXRDY); + } +} + +/* + * Stop receiving - port is in process of being closed. + */ +static void atmel_stop_rx(struct uart_port *port) +{ + if (atmel_use_dma_rx(port)) { + /* disable PDC receive */ + UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); + UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + } else { + UART_PUT_IDR(port, ATMEL_US_RXRDY); + } +} + +/* + * Enable modem status interrupts + */ +static void atmel_enable_ms(struct uart_port *port) +{ + UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC + | ATMEL_US_DCDIC | ATMEL_US_CTSIC); +} + +/* + * Control the transmission of a break signal + */ +static void atmel_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state != 0) + UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */ + else + UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */ +} + +/* + * Stores the incoming character in the ring buffer + */ +static void +atmel_buffer_rx_char(struct uart_port *port, unsigned int status, + unsigned int ch) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + struct atmel_uart_char *c; + + if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE)) + /* Buffer overflow, ignore char */ + return; + + c = &((struct atmel_uart_char *)ring->buf)[ring->head]; + c->status = status; + c->ch = ch; + + /* Make sure the character is stored before we update head. */ + smp_wmb(); + + ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1); +} + +/* + * Deal with parity, framing and overrun errors. + */ +static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) +{ + /* clear error */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + port->icount.brk++; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; +} + +/* + * Characters received (called from interrupt handler) + */ +static void atmel_rx_chars(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, ch; + + status = UART_GET_CSR(port); + while (status & ATMEL_US_RXRDY) { + ch = UART_GET_CHAR(port); + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK) + || atmel_port->break_active)) { + + /* clear error */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK + && !atmel_port->break_active) { + atmel_port->break_active = 1; + UART_PUT_IER(port, ATMEL_US_RXBRK); + } else { + /* + * This is either the end-of-break + * condition or we've received at + * least one character without RXBRK + * being set. In both cases, the next + * RXBRK will indicate start-of-break. + */ + UART_PUT_IDR(port, ATMEL_US_RXBRK); + status &= ~ATMEL_US_RXBRK; + atmel_port->break_active = 0; + } + } + + atmel_buffer_rx_char(port, status, ch); + status = UART_GET_CSR(port); + } + + tasklet_schedule(&atmel_port->tasklet); +} + +/* + * Transmit characters (called from tasklet with TXRDY interrupt + * disabled) + */ +static void atmel_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * receive interrupt handler. + */ +static void +atmel_handle_receive(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_rx(port)) { + /* + * PDC receive. Just schedule the tasklet and let it + * figure out the details. + * + * TODO: We're not handling error flags correctly at + * the moment. + */ + if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) { + UART_PUT_IDR(port, (ATMEL_US_ENDRX + | ATMEL_US_TIMEOUT)); + tasklet_schedule(&atmel_port->tasklet); + } + + if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | + ATMEL_US_FRAME | ATMEL_US_PARE)) + atmel_pdc_rxerr(port, pending); + } + + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); + else if (pending & ATMEL_US_RXBRK) { + /* + * End of break detected. If it came along with a + * character, atmel_rx_chars will handle it. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, ATMEL_US_RXBRK); + atmel_port->break_active = 0; + } +} + +/* + * transmit interrupt handler. (Transmit is IRQF_NODELAY safe) + */ +static void +atmel_handle_transmit(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (pending & atmel_port->tx_done_mask) { + /* Either PDC or interrupt transmission */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + tasklet_schedule(&atmel_port->tasklet); + } +} + +/* + * status flags interrupt handler. + */ +static void +atmel_handle_status(struct uart_port *port, unsigned int pending, + unsigned int status) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC + | ATMEL_US_CTSIC)) { + atmel_port->irq_status = status; + tasklet_schedule(&atmel_port->tasklet); + } +} + +/* + * Interrupt handler + */ +static irqreturn_t atmel_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status, pending, pass_counter = 0; + + do { + status = UART_GET_CSR(port); + pending = status & UART_GET_IMR(port); + if (!pending) + break; + + atmel_handle_receive(port, pending); + atmel_handle_status(port, pending, status); + atmel_handle_transmit(port, pending); + } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * Called from tasklet with ENDTX and TXBUFE interrupts disabled. + */ +static void atmel_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *xmit = &port->state->xmit; + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + int count; + + /* nothing left to transmit? */ + if (UART_GET_TCR(port)) + return; + + xmit->tail += pdc->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += pdc->ofs; + pdc->ofs = 0; + + /* more to transmit - setup next transfer */ + + /* disable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + dma_sync_single_for_device(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + pdc->ofs = count; + + UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); + UART_PUT_TCR(port, count); + /* re-enable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + } else { + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void atmel_rx_from_ring(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + unsigned int flg; + unsigned int status; + + while (ring->head != ring->tail) { + struct atmel_uart_char c; + + /* Make sure c is loaded after head. */ + smp_rmb(); + + c = ((struct atmel_uart_char *)ring->buf)[ring->tail]; + + ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1); + + port->icount.rx++; + status = c.status; + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & ATMEL_US_RXBRK) + flg = TTY_BREAK; + else if (status & ATMEL_US_PARE) + flg = TTY_PARITY; + else if (status & ATMEL_US_FRAME) + flg = TTY_FRAME; + } + + + if (uart_handle_sysrq_char(port, c.ch)) + continue; + + uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); + } + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(port->state->port.tty); + spin_lock(&port->lock); +} + +static void atmel_rx_from_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_struct *tty = port->state->port.tty; + struct atmel_dma_buffer *pdc; + int rx_idx = atmel_port->pdc_rx_idx; + unsigned int head; + unsigned int tail; + unsigned int count; + + do { + /* Reset the UART timeout early so that we don't miss one */ + UART_PUT_CR(port, ATMEL_US_STTTO); + + pdc = &atmel_port->pdc_rx[rx_idx]; + head = UART_GET_RPR(port) - pdc->dma_addr; + tail = pdc->ofs; + + /* If the PDC has switched buffers, RPR won't contain + * any address within the current buffer. Since head + * is unsigned, we just need a one-way comparison to + * find out. + * + * In this case, we just need to consume the entire + * buffer and resubmit it for DMA. This will clear the + * ENDRX bit as well, so that we can safely re-enable + * all interrupts below. + */ + head = min(head, pdc->dma_size); + + if (likely(head != tail)) { + dma_sync_single_for_cpu(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + /* + * head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + count = head - tail; + + tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); + + dma_sync_single_for_device(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + port->icount.rx += count; + pdc->ofs = head; + } + + /* + * If the current buffer is full, we need to check if + * the next one contains any additional data. + */ + if (head >= pdc->dma_size) { + pdc->ofs = 0; + UART_PUT_RNPR(port, pdc->dma_addr); + UART_PUT_RNCR(port, pdc->dma_size); + + rx_idx = !rx_idx; + atmel_port->pdc_rx_idx = rx_idx; + } + } while (head >= pdc->dma_size); + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(tty); + spin_lock(&port->lock); + + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); +} + +/* + * tasklet handling tty stuff outside the interrupt handler. + */ +static void atmel_tasklet_func(unsigned long data) +{ + struct uart_port *port = (struct uart_port *)data; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status; + unsigned int status_change; + + /* The interrupt handler does not take the lock */ + spin_lock(&port->lock); + + if (atmel_use_dma_tx(port)) + atmel_tx_dma(port); + else + atmel_tx_chars(port); + + status = atmel_port->irq_status; + status_change = status ^ atmel_port->irq_status_prev; + + if (status_change & (ATMEL_US_RI | ATMEL_US_DSR + | ATMEL_US_DCD | ATMEL_US_CTS)) { + /* TODO: All reads to CSR will clear these interrupts! */ + if (status_change & ATMEL_US_RI) + port->icount.rng++; + if (status_change & ATMEL_US_DSR) + port->icount.dsr++; + if (status_change & ATMEL_US_DCD) + uart_handle_dcd_change(port, !(status & ATMEL_US_DCD)); + if (status_change & ATMEL_US_CTS) + uart_handle_cts_change(port, !(status & ATMEL_US_CTS)); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + + atmel_port->irq_status_prev = status; + } + + if (atmel_use_dma_rx(port)) + atmel_rx_from_dma(port); + else + atmel_rx_from_ring(port); + + spin_unlock(&port->lock); +} + +/* + * Perform initialization and enable port for reception + */ +static int atmel_startup(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_struct *tty = port->state->port.tty; + int retval; + + /* + * Ensure that no interrupts are enabled otherwise when + * request_irq() is called we could get stuck trying to + * handle an unexpected interrupt + */ + UART_PUT_IDR(port, -1); + + /* + * Allocate the IRQ + */ + retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, + tty ? tty->name : "atmel_serial", port); + if (retval) { + printk("atmel_serial: atmel_startup - Can't get irq\n"); + return retval; + } + + /* + * Initialize DMA (if necessary) + */ + if (atmel_use_dma_rx(port)) { + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); + if (pdc->buf == NULL) { + if (i != 0) { + dma_unmap_single(port->dev, + atmel_port->pdc_rx[0].dma_addr, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + kfree(atmel_port->pdc_rx[0].buf); + } + free_irq(port->irq, port); + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + pdc->dma_size = PDC_BUFFER_SIZE; + pdc->ofs = 0; + } + + atmel_port->pdc_rx_idx = 0; + + UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); + UART_PUT_RCR(port, PDC_BUFFER_SIZE); + + UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); + UART_PUT_RNCR(port, PDC_BUFFER_SIZE); + } + if (atmel_use_dma_tx(port)) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + struct circ_buf *xmit = &port->state->xmit; + + pdc->buf = xmit->buf; + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + pdc->dma_size = UART_XMIT_SIZE; + pdc->ofs = 0; + } + + /* + * If there is a specific "open" function (to register + * control line interrupts) + */ + if (atmel_open_hook) { + retval = atmel_open_hook(port); + if (retval) { + free_irq(port->irq, port); + return retval; + } + } + + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status = atmel_port->irq_status_prev; + + /* + * Finally, enable the serial port + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + /* enable xmit & rcvr */ + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + if (atmel_use_dma_rx(port)) { + /* set UART timeout */ + UART_PUT_RTOR(port, PDC_RX_TIMEOUT); + UART_PUT_CR(port, ATMEL_US_STTTO); + + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); + /* enable PDC controller */ + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + /* enable receive only */ + UART_PUT_IER(port, ATMEL_US_RXRDY); + } + + return 0; +} + +/* + * Disable the port + */ +static void atmel_shutdown(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + /* + * Ensure everything is stopped. + */ + atmel_stop_rx(port); + atmel_stop_tx(port); + + /* + * Shut-down the DMA. + */ + if (atmel_use_dma_rx(port)) { + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_FROM_DEVICE); + kfree(pdc->buf); + } + } + if (atmel_use_dma_tx(port)) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); + } + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, -1); + + /* + * Free the interrupt + */ + free_irq(port->irq, port); + + /* + * If there is a specific "close" function (to unregister + * control line interrupts) + */ + if (atmel_close_hook) + atmel_close_hook(port); +} + +/* + * Flush any TX data submitted for DMA. Called when the TX circular + * buffer is reset. + */ +static void atmel_flush_buffer(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + UART_PUT_TCR(port, 0); + atmel_port->pdc_tx.ofs = 0; + } +} + +/* + * Power / Clock management. + */ +static void atmel_serial_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + switch (state) { + case 0: + /* + * Enable the peripheral clock for this serial port. + * This is called on uart_open() or a resume event. + */ + clk_enable(atmel_port->clk); + + /* re-enable interrupts if we disabled some on suspend */ + UART_PUT_IER(port, atmel_port->backup_imr); + break; + case 3: + /* Back up the interrupt mask and disable all interrupts */ + atmel_port->backup_imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + + /* + * Disable the peripheral clock for this serial port. + * This is called on uart_close() or a suspend event. + */ + clk_disable(atmel_port->clk); + break; + default: + printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); + } +} + +/* + * Change the port parameters + */ +static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int mode, imr, quot, baud; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL + | ATMEL_US_NBSTOP | ATMEL_US_PAR + | ATMEL_US_USMODE); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + quot /= 8; + mode |= ATMEL_US_USCLKS_MCK_DIV8; + } + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mode |= ATMEL_US_CHRL_5; + break; + case CS6: + mode |= ATMEL_US_CHRL_6; + break; + case CS7: + mode |= ATMEL_US_CHRL_7; + break; + default: + mode |= ATMEL_US_CHRL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + mode |= ATMEL_US_NBSTOP_2; + + /* parity */ + if (termios->c_cflag & PARENB) { + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_MARK; + else + mode |= ATMEL_US_PAR_SPACE; + } else if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_ODD; + else + mode |= ATMEL_US_PAR_EVEN; + } else + mode |= ATMEL_US_PAR_NONE; + + /* hardware handshake (RTS/CTS) */ + if (termios->c_cflag & CRTSCTS) + mode |= ATMEL_US_USMODE_HWHS; + else + mode |= ATMEL_US_USMODE_NORMAL; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= ATMEL_US_RXBRK; + + if (atmel_use_dma_rx(port)) + /* need to enable error interrupts */ + UART_PUT_IER(port, port->read_status_mask); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= ATMEL_US_RXBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ATMEL_US_OVRE; + } + /* TODO: Ignore all characters if CREAD is set.*/ + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * save/disable interrupts. The tty layer will ensure that the + * transmitter is empty if requested by the caller, so there's + * no need to wait for it here. + */ + imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + + /* disable receiver and transmitter */ + UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + + /* set the parity, stop bits and data size */ + UART_PUT_MR(port, mode); + + /* set the baud rate */ + UART_PUT_BRGR(port, quot); + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + /* restore interrupts */ + UART_PUT_IER(port, imr); + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + port->ops->enable_ms(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return string describing the specified port + */ +static const char *atmel_type(struct uart_port *port) +{ + return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void atmel_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + release_mem_region(port->mapbase, size); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int atmel_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + if (!request_mem_region(port->mapbase, size, "atmel_serial")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void atmel_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_ATMEL; + atmel_request_port(port); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)port->mapbase != ser->iomem_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +#ifdef CONFIG_CONSOLE_POLL +static int atmel_poll_get_char(struct uart_port *port) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) + cpu_relax(); + + return UART_GET_CHAR(port); +} + +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + + UART_PUT_CHAR(port, ch); +} +#endif + +static int +atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) +{ + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + atmel_config_rs485(port, &rs485conf); + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + &(to_atmel_uart_port(port)->rs485), + sizeof(rs485conf))) + return -EFAULT; + break; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + + + +static struct uart_ops atmel_pops = { + .tx_empty = atmel_tx_empty, + .set_mctrl = atmel_set_mctrl, + .get_mctrl = atmel_get_mctrl, + .stop_tx = atmel_stop_tx, + .start_tx = atmel_start_tx, + .stop_rx = atmel_stop_rx, + .enable_ms = atmel_enable_ms, + .break_ctl = atmel_break_ctl, + .startup = atmel_startup, + .shutdown = atmel_shutdown, + .flush_buffer = atmel_flush_buffer, + .set_termios = atmel_set_termios, + .type = atmel_type, + .release_port = atmel_release_port, + .request_port = atmel_request_port, + .config_port = atmel_config_port, + .verify_port = atmel_verify_port, + .pm = atmel_serial_pm, + .ioctl = atmel_ioctl, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = atmel_poll_get_char, + .poll_put_char = atmel_poll_put_char, +#endif +}; + +/* + * Configure the port from the platform device resource info. + */ +static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + struct uart_port *port = &atmel_port->uart; + struct atmel_uart_data *data = pdev->dev.platform_data; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &atmel_pops; + port->fifosize = 1; + port->line = pdev->id; + port->dev = &pdev->dev; + port->mapbase = pdev->resource[0].start; + port->irq = pdev->resource[1].start; + + tasklet_init(&atmel_port->tasklet, atmel_tasklet_func, + (unsigned long)port); + + memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); + + if (data->regs) + /* Already mapped by setup code */ + port->membase = data->regs; + else { + port->flags |= UPF_IOREMAP; + port->membase = NULL; + } + + /* for console, the clock could already be configured */ + if (!atmel_port->clk) { + atmel_port->clk = clk_get(&pdev->dev, "usart"); + clk_enable(atmel_port->clk); + port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable(atmel_port->clk); + /* only enable clock when USART is in use */ + } + + atmel_port->use_dma_rx = data->use_dma_rx; + atmel_port->use_dma_tx = data->use_dma_tx; + atmel_port->rs485 = data->rs485; + /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + else if (atmel_use_dma_tx(port)) { + port->fifosize = PDC_BUFFER_SIZE; + atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; + } else { + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } +} + +/* + * Register board-specific modem-control line handlers. + */ +void __init atmel_register_uart_fns(struct atmel_port_fns *fns) +{ + if (fns->enable_ms) + atmel_pops.enable_ms = fns->enable_ms; + if (fns->get_mctrl) + atmel_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + atmel_pops.set_mctrl = fns->set_mctrl; + atmel_open_hook = fns->open; + atmel_close_hook = fns->close; + atmel_pops.pm = fns->pm; + atmel_pops.set_wake = fns->set_wake; +} + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE +static void atmel_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + UART_PUT_CHAR(port, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void atmel_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, imr; + unsigned int pdc_tx; + + /* + * First, save IMR and then disable interrupts + */ + imr = UART_GET_IMR(port); + UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); + + /* Store PDC transmit status and disable it */ + pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + + uart_console_write(port, s, count, atmel_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IMR + */ + do { + status = UART_GET_CSR(port); + } while (!(status & ATMEL_US_TXRDY)); + + /* Restore PDC transmit status */ + if (pdc_tx) + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + + /* set interrupts back the way they were */ + UART_PUT_IER(port, imr); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init atmel_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + unsigned int mr, quot; + + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = UART_GET_BRGR(port) & ATMEL_US_CD; + if (!quot) + return; + + mr = UART_GET_MR(port) & ATMEL_US_CHRL; + if (mr == ATMEL_US_CHRL_8) + *bits = 8; + else + *bits = 7; + + mr = UART_GET_MR(port) & ATMEL_US_PAR; + if (mr == ATMEL_US_PAR_EVEN) + *parity = 'e'; + else if (mr == ATMEL_US_PAR_ODD) + *parity = 'o'; + + /* + * The serial core only rounds down when matching this to a + * supported baud rate. Make sure we don't end up slightly + * lower than one of those, as it would make us fall through + * to a much lower baud rate than we really want. + */ + *baud = port->uartclk / (16 * (quot - 1)); +} + +static int __init atmel_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &atmel_ports[co->index].uart; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (port->membase == NULL) { + /* Port not initialized yet - delay setup */ + return -ENODEV; + } + + clk_enable(atmel_ports[co->index].clk); + + UART_PUT_IDR(port, -1); + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + atmel_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver atmel_uart; + +static struct console atmel_console = { + .name = ATMEL_DEVICENAME, + .write = atmel_console_write, + .device = uart_console_device, + .setup = atmel_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &atmel_uart, +}; + +#define ATMEL_CONSOLE_DEVICE (&atmel_console) + +/* + * Early console initialization (before VM subsystem initialized). + */ +static int __init atmel_console_init(void) +{ + if (atmel_default_console_device) { + add_preferred_console(ATMEL_DEVICENAME, + atmel_default_console_device->id, NULL); + atmel_init_port(&atmel_ports[atmel_default_console_device->id], + atmel_default_console_device); + register_console(&atmel_console); + } + + return 0; +} + +console_initcall(atmel_console_init); + +/* + * Late console initialization. + */ +static int __init atmel_late_console_init(void) +{ + if (atmel_default_console_device + && !(atmel_console.flags & CON_ENABLED)) + register_console(&atmel_console); + + return 0; +} + +core_initcall(atmel_late_console_init); + +static inline bool atmel_is_console_port(struct uart_port *port) +{ + return port->cons && port->cons->index == port->line; +} + +#else +#define ATMEL_CONSOLE_DEVICE NULL + +static inline bool atmel_is_console_port(struct uart_port *port) +{ + return false; +} +#endif + +static struct uart_driver atmel_uart = { + .owner = THIS_MODULE, + .driver_name = "atmel_serial", + .dev_name = ATMEL_DEVICENAME, + .major = SERIAL_ATMEL_MAJOR, + .minor = MINOR_START, + .nr = ATMEL_MAX_UART, + .cons = ATMEL_CONSOLE_DEVICE, +}; + +#ifdef CONFIG_PM +static bool atmel_serial_clk_will_stop(void) +{ +#ifdef CONFIG_ARCH_AT91 + return at91_suspend_entering_slow_clock(); +#else + return false; +#endif +} + +static int atmel_serial_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_is_console_port(port) && console_suspend_enabled) { + /* Drain the TX shifter */ + while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) + cpu_relax(); + } + + /* we can not wake up if we're running on slow clock */ + atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); + if (atmel_serial_clk_will_stop()) + device_set_wakeup_enable(&pdev->dev, 0); + + uart_suspend_port(&atmel_uart, port); + + return 0; +} + +static int atmel_serial_resume(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + uart_resume_port(&atmel_uart, port); + device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); + + return 0; +} +#else +#define atmel_serial_suspend NULL +#define atmel_serial_resume NULL +#endif + +static int __devinit atmel_serial_probe(struct platform_device *pdev) +{ + struct atmel_uart_port *port; + void *data; + int ret; + + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); + + port = &atmel_ports[pdev->id]; + port->backup_imr = 0; + + atmel_init_port(port, pdev); + + if (!atmel_use_dma_rx(&port->uart)) { + ret = -ENOMEM; + data = kmalloc(sizeof(struct atmel_uart_char) + * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); + if (!data) + goto err_alloc_ring; + port->rx_ring.buf = data; + } + + ret = uart_add_one_port(&atmel_uart, &port->uart); + if (ret) + goto err_add_port; + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE + if (atmel_is_console_port(&port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_enable() in atmel_console_setup() + */ + clk_disable(port->clk); + } +#endif + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, port); + + return 0; + +err_add_port: + kfree(port->rx_ring.buf); + port->rx_ring.buf = NULL; +err_alloc_ring: + if (!atmel_is_console_port(&port->uart)) { + clk_put(port->clk); + port->clk = NULL; + } + + return ret; +} + +static int __devexit atmel_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int ret = 0; + + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); + + ret = uart_remove_one_port(&atmel_uart, port); + + tasklet_kill(&atmel_port->tasklet); + kfree(atmel_port->rx_ring.buf); + + /* "port" is allocated statically, so we shouldn't free it */ + + clk_put(atmel_port->clk); + + return ret; +} + +static struct platform_driver atmel_serial_driver = { + .probe = atmel_serial_probe, + .remove = __devexit_p(atmel_serial_remove), + .suspend = atmel_serial_suspend, + .resume = atmel_serial_resume, + .driver = { + .name = "atmel_usart", + .owner = THIS_MODULE, + }, +}; + +static int __init atmel_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&atmel_uart); + if (ret) + return ret; + + ret = platform_driver_register(&atmel_serial_driver); + if (ret) + uart_unregister_driver(&atmel_uart); + + return ret; +} + +static void __exit atmel_serial_exit(void) +{ + platform_driver_unregister(&atmel_serial_driver); + uart_unregister_driver(&atmel_uart); +} + +module_init(atmel_serial_init); +module_exit(atmel_serial_exit); + +MODULE_AUTHOR("Rick Bronson"); +MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usart"); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c new file mode 100644 index 0000000..a1a0e55 --- /dev/null +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -0,0 +1,891 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from many drivers using generic_serial interface. + * + * Copyright (C) 2008 Maxime Bizon + * + * Serial driver for BCM63xx integrated UART. + * + * Hardware flow control was _not_ tested since I only have RX/TX on + * my board. + */ + +#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define BCM63XX_NR_UARTS 2 + +static struct uart_port ports[BCM63XX_NR_UARTS]; + +/* + * rx interrupt mask / stat + * + * mask: + * - rx fifo full + * - rx fifo above threshold + * - rx fifo not empty for too long + */ +#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ + UART_IR_MASK(UART_IR_RXTHRESH) | \ + UART_IR_MASK(UART_IR_RXTIMEOUT)) + +#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ + UART_IR_STAT(UART_IR_RXTHRESH) | \ + UART_IR_STAT(UART_IR_RXTIMEOUT)) + +/* + * tx interrupt mask / stat + * + * mask: + * - tx fifo empty + * - tx fifo below threshold + */ +#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ + UART_IR_MASK(UART_IR_TXTRESH)) + +#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ + UART_IR_STAT(UART_IR_TXTRESH)) + +/* + * external input interrupt + * + * mask: any edge on CTS, DCD + */ +#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ + UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) + +/* + * handy uart register accessor + */ +static inline unsigned int bcm_uart_readl(struct uart_port *port, + unsigned int offset) +{ + return bcm_readl(port->membase + offset); +} + +static inline void bcm_uart_writel(struct uart_port *port, + unsigned int value, unsigned int offset) +{ + bcm_writel(value, port->membase + offset); +} + +/* + * serial core request to check if uart tx fifo is empty + */ +static unsigned int bcm_uart_tx_empty(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; +} + +/* + * serial core request to set RTS and DTR pin state and loopback mode + */ +static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); + /* invert of written value is reflected on the pin */ + if (!(mctrl & TIOCM_DTR)) + val |= UART_MCTL_DTR_MASK; + if (!(mctrl & TIOCM_RTS)) + val |= UART_MCTL_RTS_MASK; + bcm_uart_writel(port, val, UART_MCTL_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (mctrl & TIOCM_LOOP) + val |= UART_CTL_LOOPBACK_MASK; + else + val &= ~UART_CTL_LOOPBACK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to return RI, CTS, DCD and DSR pin state + */ +static unsigned int bcm_uart_get_mctrl(struct uart_port *port) +{ + unsigned int val, mctrl; + + mctrl = 0; + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_RI_MASK) + mctrl |= TIOCM_RI; + if (val & UART_EXTINP_CTS_MASK) + mctrl |= TIOCM_CTS; + if (val & UART_EXTINP_DCD_MASK) + mctrl |= TIOCM_CD; + if (val & UART_EXTINP_DSR_MASK) + mctrl |= TIOCM_DSR; + return mctrl; +} + +/* + * serial core request to disable tx ASAP (used for flow control) + */ +static void bcm_uart_stop_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_TXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to (re)enable tx + */ +static void bcm_uart_start_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_TXEN_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to stop rx, called before port shutdown + */ +static void bcm_uart_stop_rx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_RX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to enable modem status interrupt reporting + */ +static void bcm_uart_enable_ms(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_IR_MASK(UART_IR_EXTIP); + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to start/stop emitting break char + */ +static void bcm_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&port->lock, flags); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (ctl) + val |= UART_CTL_XMITBRK_MASK; + else + val &= ~UART_CTL_XMITBRK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * return port type in string format + */ +static const char *bcm_uart_type(struct uart_port *port) +{ + return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; +} + +/* + * read all chars in rx fifo and send them to core + */ +static void bcm_uart_do_rx(struct uart_port *port) +{ + struct tty_struct *tty; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port */ + max_count = 32; + tty = port->state->port.tty; + do { + unsigned int iestat, c, cstat; + char flag; + + /* get overrun/fifo empty information from ier + * register */ + iestat = bcm_uart_readl(port, UART_IR_REG); + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + break; + + cstat = c = bcm_uart_readl(port, UART_FIFO_REG); + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { + /* do stats first */ + if (cstat & UART_FIFO_BRKDET_MASK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + + if (cstat & UART_FIFO_PARERR_MASK) + port->icount.parity++; + if (cstat & UART_FIFO_FRAMEERR_MASK) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + cstat &= port->read_status_mask; + if (cstat & UART_FIFO_BRKDET_MASK) + flag = TTY_BREAK; + if (cstat & UART_FIFO_FRAMEERR_MASK) + flag = TTY_FRAME; + if (cstat & UART_FIFO_PARERR_MASK) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + if ((cstat & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, c, flag); + + } while (--max_count); + + tty_flip_buffer_push(tty); +} + +/* + * fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void bcm_uart_do_tx(struct uart_port *port) +{ + struct circ_buf *xmit; + unsigned int val, max_count; + + if (port->x_char) { + bcm_uart_writel(port, port->x_char, UART_FIFO_REG); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + bcm_uart_stop_tx(port); + return; + } + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + goto txq_empty; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; + max_count = port->fifosize - val; + + while (max_count--) { + unsigned int c; + + c = xmit->buf[xmit->tail]; + bcm_uart_writel(port, c, UART_FIFO_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + return; + +txq_empty: + /* nothing to send, disable transmit interrupt */ + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + return; +} + +/* + * process uart interrupt + */ +static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + unsigned int irqstat; + + port = dev_id; + spin_lock(&port->lock); + + irqstat = bcm_uart_readl(port, UART_IR_REG); + if (irqstat & UART_RX_INT_STAT) + bcm_uart_do_rx(port); + + if (irqstat & UART_TX_INT_STAT) + bcm_uart_do_tx(port); + + if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { + unsigned int estat; + + estat = bcm_uart_readl(port, UART_EXTINP_REG); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) + uart_handle_cts_change(port, + estat & UART_EXTINP_CTS_MASK); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) + uart_handle_dcd_change(port, + estat & UART_EXTINP_DCD_MASK); + } + + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +/* + * enable rx & tx operation on uart + */ +static void bcm_uart_enable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * disable rx & tx operation on uart + */ +static void bcm_uart_disable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | + UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * clear all unread data in rx fifo and unsent data in tx fifo + */ +static void bcm_uart_flush(struct uart_port *port) +{ + unsigned int val; + + /* empty rx and tx fifo */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* read any pending char to make sure all irq status are + * cleared */ + (void)bcm_uart_readl(port, UART_FIFO_REG); +} + +/* + * serial core request to initialize uart and start rx operation + */ +static int bcm_uart_startup(struct uart_port *port) +{ + unsigned int val; + int ret; + + /* mask all irq and flush port */ + bcm_uart_disable(port); + bcm_uart_writel(port, 0, UART_IR_REG); + bcm_uart_flush(port); + + /* clear any pending external input interrupt */ + (void)bcm_uart_readl(port, UART_EXTINP_REG); + + /* set rx/tx fifo thresh to fifo half size */ + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); + val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; + val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; + bcm_uart_writel(port, val, UART_MCTL_REG); + + /* set rx fifo timeout to 1 char time */ + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~UART_CTL_RXTMOUTCNT_MASK; + val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* report any edge on dcd and cts */ + val = UART_EXTINP_INT_MASK; + val |= UART_EXTINP_DCD_NOSENSE_MASK; + val |= UART_EXTINP_CTS_NOSENSE_MASK; + bcm_uart_writel(port, val, UART_EXTINP_REG); + + /* register irq and enable rx interrupts */ + ret = request_irq(port->irq, bcm_uart_interrupt, 0, + bcm_uart_type(port), port); + if (ret) + return ret; + bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); + bcm_uart_enable(port); + return 0; +} + +/* + * serial core request to flush & disable uart + */ +static void bcm_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + bcm_uart_writel(port, 0, UART_IR_REG); + spin_unlock_irqrestore(&port->lock, flags); + + bcm_uart_disable(port); + bcm_uart_flush(port); + free_irq(port->irq, port); +} + +/* + * serial core request to change current uart setting + */ +static void bcm_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int ctl, baud, quot, ier; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable uart while changing speed */ + bcm_uart_disable(port); + bcm_uart_flush(port); + + /* update Control register */ + ctl = bcm_uart_readl(port, UART_CTL_REG); + ctl &= ~UART_CTL_BITSPERSYM_MASK; + + switch (new->c_cflag & CSIZE) { + case CS5: + ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS6: + ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS7: + ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); + break; + default: + ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); + break; + } + + ctl &= ~UART_CTL_STOPBITS_MASK; + if (new->c_cflag & CSTOPB) + ctl |= UART_CTL_STOPBITS_2; + else + ctl |= UART_CTL_STOPBITS_1; + + ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + if (new->c_cflag & PARENB) + ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + if (new->c_cflag & PARODD) + ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + bcm_uart_writel(port, ctl, UART_CTL_REG); + + /* update Baudword register */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + bcm_uart_writel(port, quot, UART_BAUD_REG); + + /* update Interrupt register */ + ier = bcm_uart_readl(port, UART_IR_REG); + + ier &= ~UART_IR_MASK(UART_IR_EXTIP); + if (UART_ENABLE_MS(port, new->c_cflag)) + ier |= UART_IR_MASK(UART_IR_EXTIP); + + bcm_uart_writel(port, ier, UART_IR_REG); + + /* update read/ignore mask */ + port->read_status_mask = UART_FIFO_VALID_MASK; + if (new->c_iflag & INPCK) { + port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; + port->read_status_mask |= UART_FIFO_PARERR_MASK; + } + if (new->c_iflag & (BRKINT)) + port->read_status_mask |= UART_FIFO_BRKDET_MASK; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_FIFO_PARERR_MASK; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; + if (!(new->c_cflag & CREAD)) + port->ignore_status_mask |= UART_FIFO_VALID_MASK; + + uart_update_timeout(port, new->c_cflag, baud); + bcm_uart_enable(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * serial core request to claim uart iomem + */ +static int bcm_uart_request_port(struct uart_port *port) +{ + unsigned int size; + + size = RSET_UART_SIZE; + if (!request_mem_region(port->mapbase, size, "bcm63xx")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, size); + return -EBUSY; + } + return 0; +} + +/* + * serial core request to release uart iomem + */ +static void bcm_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, RSET_UART_SIZE); + iounmap(port->membase); +} + +/* + * serial core request to do any port required autoconfiguration + */ +static void bcm_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (bcm_uart_request_port(port)) + return; + port->type = PORT_BCM63XX; + } +} + +/* + * serial core request to check that port information in serinfo are + * suitable + */ +static int bcm_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_BCM63XX) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + return 0; +} + +/* serial core callbacks */ +static struct uart_ops bcm_uart_ops = { + .tx_empty = bcm_uart_tx_empty, + .get_mctrl = bcm_uart_get_mctrl, + .set_mctrl = bcm_uart_set_mctrl, + .start_tx = bcm_uart_start_tx, + .stop_tx = bcm_uart_stop_tx, + .stop_rx = bcm_uart_stop_rx, + .enable_ms = bcm_uart_enable_ms, + .break_ctl = bcm_uart_break_ctl, + .startup = bcm_uart_startup, + .shutdown = bcm_uart_shutdown, + .set_termios = bcm_uart_set_termios, + .type = bcm_uart_type, + .release_port = bcm_uart_release_port, + .request_port = bcm_uart_request_port, + .config_port = bcm_uart_config_port, + .verify_port = bcm_uart_verify_port, +}; + + + +#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int tmout; + + /* Wait up to 10ms for the character(s) to be sent. */ + tmout = 10000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (port->flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_CTS_MASK) + break; + udelay(1); + } + } +} + +/* + * output given char + */ +static void bcm_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + bcm_uart_writel(port, ch, UART_FIFO_REG); +} + +/* + * console core request to output given string + */ +static void bcm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + unsigned long flags; + int locked; + + port = &ports[co->index]; + + local_irq_save(flags); + if (port->sysrq) { + /* bcm_uart_interrupt() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + /* call helper to deal with \r\n */ + uart_console_write(port, s, count, bcm_console_putchar); + + /* and wait for char to be transmitted */ + wait_for_xmitr(port); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +/* + * console core request to setup given console, find matching uart + * port and setup it. + */ +static int bcm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) + return -EINVAL; + port = &ports[co->index]; + if (!port->membase) + return -ENODEV; + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver bcm_uart_driver; + +static struct console bcm63xx_console = { + .name = "ttyS", + .write = bcm_console_write, + .device = uart_console_device, + .setup = bcm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bcm_uart_driver, +}; + +static int __init bcm63xx_console_init(void) +{ + register_console(&bcm63xx_console); + return 0; +} + +console_initcall(bcm63xx_console_init); + +#define BCM63XX_CONSOLE (&bcm63xx_console) +#else +#define BCM63XX_CONSOLE NULL +#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ + +static struct uart_driver bcm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "bcm63xx_uart", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = BCM63XX_NR_UARTS, + .cons = BCM63XX_CONSOLE, +}; + +/* + * platform driver probe/remove callback + */ +static int __devinit bcm_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem, *res_irq; + struct uart_port *port; + struct clk *clk; + int ret; + + if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) + return -EINVAL; + + if (ports[pdev->id].membase) + return -EBUSY; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + + clk = clk_get(&pdev->dev, "periph"); + if (IS_ERR(clk)) + return -ENODEV; + + port = &ports[pdev->id]; + memset(port, 0, sizeof(*port)); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->irq = res_irq->start; + port->ops = &bcm_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = 16; + port->uartclk = clk_get_rate(clk) / 2; + port->line = pdev->id; + clk_put(clk); + + ret = uart_add_one_port(&bcm_uart_driver, port); + if (ret) { + ports[pdev->id].membase = 0; + return ret; + } + platform_set_drvdata(pdev, port); + return 0; +} + +static int __devexit bcm_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&bcm_uart_driver, port); + platform_set_drvdata(pdev, NULL); + /* mark port as free */ + ports[pdev->id].membase = 0; + return 0; +} + +/* + * platform driver stuff + */ +static struct platform_driver bcm_uart_platform_driver = { + .probe = bcm_uart_probe, + .remove = __devexit_p(bcm_uart_remove), + .driver = { + .owner = THIS_MODULE, + .name = "bcm63xx_uart", + }, +}; + +static int __init bcm_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&bcm_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&bcm_uart_platform_driver); + if (ret) + uart_unregister_driver(&bcm_uart_driver); + + return ret; +} + +static void __exit bcm_uart_exit(void) +{ + platform_driver_unregister(&bcm_uart_platform_driver); + uart_unregister_driver(&bcm_uart_driver); +} + +module_init(bcm_uart_init); +module_exit(bcm_uart_exit); + +MODULE_AUTHOR("Maxime Bizon "); +MODULE_DESCRIPTION("Broadcom 63 +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) +#include + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +/* UART name and device definitions */ +#define BFIN_SERIAL_DEV_NAME "ttyBF" +#define BFIN_SERIAL_MAJOR 204 +#define BFIN_SERIAL_MINOR 64 + +static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif +/* + * Setup for console. Argument comes from the menuconfig + */ +#define DMA_RX_XCOUNT 512 +#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) + +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); +#else +static void bfin_serial_tx_chars(struct bfin_serial_port *uart); +#endif + +static void bfin_serial_reset_irda(struct uart_port *port); + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->cts_pin < 0) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (UART_GET_CTS(uart)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->rts_pin < 0) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + UART_ENABLE_RTS(uart); + else + UART_DISABLE_RTS(uart); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned int status; + + status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + uart->scts = 1; + UART_CLEAR_SCTS(uart); + UART_CLEAR_IER(uart, EDSSI); +#endif + + return IRQ_HANDLED; +} +#else +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} +#endif + +/* + * interrupts are disabled on entry + */ +static void bfin_serial_stop_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_SERIAL_BFIN_DMA + struct circ_buf *xmit = &uart->port.state->xmit; +#endif + + while (!(UART_GET_LSR(uart) & TEMT)) + cpu_relax(); + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; +#else +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + UART_CLEAR_IER(uart, ETBEI); +#endif +} + +/* + * port is locked and interrupts are disabled + */ +static void bfin_serial_start_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct tty_struct *tty = uart->port.state->port.tty; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios->c_line == N_IRDA) + bfin_serial_reset_irda(port); + +#ifdef CONFIG_SERIAL_BFIN_DMA + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); +#else + UART_SET_IER(uart, ETBEI); + bfin_serial_tx_chars(uart); +#endif +} + +/* + * Interrupts are enabled + */ +static void bfin_serial_stop_rx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + UART_CLEAR_IER(uart, ERBFI); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void bfin_serial_enable_ms(struct uart_port *port) +{ +} + + +#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif + +#ifdef CONFIG_SERIAL_BFIN_PIO +static void bfin_serial_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = NULL; + unsigned int status, ch, flg; + static struct timeval anomaly_start = { .tv_sec = 0 }; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); + uart->port.icount.rx++; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line + && kgdboc_break_enabled) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); + return; + } + + if (!uart->port.state || !uart->port.state->port.tty) + return; +#endif + tty = uart->port.state->port.tty; + + if (ANOMALY_05000363) { + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. + * We have to basically ignore this flood until the "next" valid + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. + */ + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + status &= ~BI; + anomaly_start.tv_sec = 0; + } + } + + if (status & BI) { + if (ANOMALY_05000363) + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + if (uart_handle_sysrq_char(&uart->port, ch)) + goto ignore_char; + + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(tty); +} + +static void bfin_serial_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); +} + +static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + + spin_lock(&uart->port.lock); + while (UART_GET_LSR(uart) & DR) + bfin_serial_rx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + spin_lock(&uart->port.lock); + if (UART_GET_LSR(uart) & THRE) + bfin_serial_tx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} +#endif + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + uart->tx_done = 0; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + uart->tx_count = 0; + uart->tx_done = 1; + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) + uart->tx_count = UART_XMIT_SIZE - xmit->tail; + blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), + (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); + set_dma_config(uart->tx_dma_channel, + set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, + INTR_ON_BUF, + DIMENSION_LINEAR, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); + set_dma_x_count(uart->tx_dma_channel, uart->tx_count); + set_dma_x_modify(uart->tx_dma_channel, 1); + SSYNC(); + enable_dma(uart->tx_dma_channel); + + UART_SET_IER(uart, ETBEI); +} + +static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = uart->port.state->port.tty; + int i, flg, status; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); + + if (status & BI) { + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto dma_ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + for (i = uart->rx_dma_buf.tail; ; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (i == uart->rx_dma_buf.head) + break; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); + } + + dma_ignore_char: + tty_flip_buffer_push(tty); +} + +void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) +{ + int x_pos, pos; + + dma_disable_irq(uart->tx_dma_channel); + dma_disable_irq(uart->rx_dma_channel); + spin_lock_bh(&uart->port.lock); + + /* 2D DMA RX buffer ring is used. Because curr_y_count and + * curr_x_count can't be read as an atomic operation, + * curr_y_count should be read before curr_x_count. When + * curr_x_count is read, curr_y_count may already indicate + * next buffer line. But, the position calculated here is + * still indicate the old line. The wrong position data may + * be smaller than current buffer tail, which cause garbages + * are received if it is not prohibit. + */ + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; + if (x_pos == DMA_RX_XCOUNT) + x_pos = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; + /* Ignore receiving data if new position is in the same line of + * current buffer tail and small. + */ + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->tx_dma_channel); + dma_enable_irq(uart->rx_dma_channel); + + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); +} + +static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + struct circ_buf *xmit = &uart->port.state->xmit; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + spin_lock(&uart->port.lock); + if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { + disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + + bfin_serial_dma_tx_chars(uart); + } + + spin_unlock(&uart->port.lock); + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned short irqstat; + int x_pos, pos; + + spin_lock(&uart->port.lock); + irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); + clear_dma_irqstat(uart->rx_dma_channel); + + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} +#endif + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int bfin_serial_tx_empty(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short lsr; + + lsr = UART_GET_LSR(uart); + if (lsr & TEMT) + return TIOCSER_TEMT; + else + return 0; +} + +static void bfin_serial_break_ctl(struct uart_port *port, int break_state) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + u16 lcr = UART_GET_LCR(uart); + if (break_state) + lcr |= SB; + else + lcr &= ~SB; + UART_PUT_LCR(uart, lcr); + SSYNC(); +} + +static int bfin_serial_startup(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + dma_addr_t dma_handle; + + if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); + return -EBUSY; + } + + if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); + free_dma(uart->rx_dma_channel); + return -EBUSY; + } + + set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); + set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); + + uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); + uart->rx_dma_buf.head = 0; + uart->rx_dma_buf.tail = 0; + uart->rx_dma_nrows = 0; + + set_dma_config(uart->rx_dma_channel, + set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, + INTR_ON_ROW, DIMENSION_2D, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); + set_dma_x_modify(uart->rx_dma_channel, 1); + set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); + set_dma_y_modify(uart->rx_dma_channel, 1); + set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); + enable_dma(uart->rx_dma_channel); + + uart->rx_dma_timer.data = (unsigned long)(uart); + uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; + add_timer(&(uart->rx_dma_timer)); +#else +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif + if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, + "BFIN_UART_RX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); + return -EBUSY; + } + + if (request_irq + (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, + "BFIN_UART_TX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); + free_irq(uart->port.irq, uart); + return -EBUSY; + } + +# ifdef CONFIG_BF54x + { + /* + * UART2 and UART3 on BF548 share interrupt PINs and DMA + * controllers with SPORT2 and SPORT3. UART rx and tx + * interrupts are generated in PIO mode only when configure + * their peripheral mapping registers properly, which means + * request corresponding DMA channels in PIO mode as well. + */ + unsigned uart_dma_ch_rx, uart_dma_ch_tx; + + switch (uart->port.irq) { + case IRQ_UART3_RX: + uart_dma_ch_rx = CH_UART3_RX; + uart_dma_ch_tx = CH_UART3_TX; + break; + case IRQ_UART2_RX: + uart_dma_ch_rx = CH_UART2_RX; + uart_dma_ch_tx = CH_UART2_TX; + break; + default: + uart_dma_ch_rx = uart_dma_ch_tx = 0; + break; + }; + + if (uart_dma_ch_rx && + request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE"Fail to attach UART interrupt\n"); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + if (uart_dma_ch_tx && + request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Fail to attach UART interrupt\n"); + free_dma(uart_dma_ch_rx); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + } +# endif +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + if (request_irq(gpio_to_irq(uart->cts_pin), + bfin_serial_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_UART_CTS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); + } + } + if (uart->rts_pin >= 0) { + gpio_direction_output(uart->rts_pin, 0); + } +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0 && request_irq(uart->status_irq, + bfin_serial_mctrl_cts_int, + IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); + } + + /* CTS RTS PINs are negative assertive. */ + UART_PUT_MCR(uart, ACTS); + UART_SET_IER(uart, EDSSI); +#endif + + UART_SET_IER(uart, ERBFI); + return 0; +} + +static void bfin_serial_shutdown(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + free_dma(uart->tx_dma_channel); + disable_dma(uart->rx_dma_channel); + free_dma(uart->rx_dma_channel); + del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); +#else +#ifdef CONFIG_BF54x + switch (uart->port.irq) { + case IRQ_UART3_RX: + free_dma(CH_UART3_RX); + free_dma(CH_UART3_TX); + break; + case IRQ_UART2_RX: + free_dma(CH_UART2_RX); + free_dma(CH_UART2_TX); + break; + default: + break; + }; +#endif + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq+1, uart); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) + free_irq(gpio_to_irq(uart->cts_pin), uart); +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0) + free_irq(uart->status_irq, uart); +#endif +} + +static void +bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned long flags; + unsigned int baud, quot; + unsigned short val, ier, lcr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS8: + lcr = WLS(8); + break; + case CS7: + lcr = WLS(7); + break; + case CS6: + lcr = WLS(6); + break; + case CS5: + lcr = WLS(5); + break; + default: + printk(KERN_ERR "%s: word lengh not supported\n", + __func__); + } + + /* Anomaly notes: + * 05000231 - STOP bit is always set to 1 whatever the user is set. + */ + if (termios->c_cflag & CSTOPB) { + if (ANOMALY_05000231) + printk(KERN_WARNING "STOP bits other than 1 is not " + "supported in case of anomaly 05000231.\n"); + else + lcr |= STB; + } + if (termios->c_cflag & PARENB) + lcr |= PEN; + if (!(termios->c_cflag & PARODD)) + lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; + + spin_lock_irqsave(&uart->port.lock, flags); + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + /* If discipline is not IRDA, apply ANOMALY_05000230 */ + if (termios->c_line != N_IRDA) + quot -= ANOMALY_05000230; + + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + + /* Disable UART */ + ier = UART_GET_IER(uart); + UART_DISABLE_INTS(uart); + + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + UART_PUT_DLL(uart, quot & 0xFF); + UART_PUT_DLH(uart, (quot >> 8) & 0xFF); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + UART_PUT_LCR(uart, lcr); + + /* Enable UART */ + UART_ENABLE_INTS(uart, ier); + + val = UART_GET_GCTL(uart); + val |= UCEN; + UART_PUT_GCTL(uart, val); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&uart->port.lock, flags); +} + +static const char *bfin_serial_type(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void bfin_serial_release_port(struct uart_port *port) +{ +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int bfin_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void bfin_serial_config_port(struct uart_port *port, int flags) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + if (flags & UART_CONFIG_TYPE && + bfin_serial_request_port(&uart->port) == 0) + uart->port.type = PORT_BFIN; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_BFIN and PORT_UNKNOWN + */ +static int +bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return 0; +} + +/* + * Enable the IrDA function if tty->ldisc.num is N_IRDA. + * In other cases, disable IrDA function. + */ +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + switch (ld) { + case N_IRDA: + val = UART_GET_GCTL(uart); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + break; + default: + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + } +} + +static void bfin_serial_reset_irda(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); +} + +#ifdef CONFIG_CONSOLE_POLL +/* Anomaly notes: + * 05000099 - Because we only use THRE in poll_put and DR in poll_get, + * losing other bits of UART_LSR is not a problem here. + */ +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + +static struct uart_ops bfin_serial_pops = { + .tx_empty = bfin_serial_tx_empty, + .set_mctrl = bfin_serial_set_mctrl, + .get_mctrl = bfin_serial_get_mctrl, + .stop_tx = bfin_serial_stop_tx, + .start_tx = bfin_serial_start_tx, + .stop_rx = bfin_serial_stop_rx, + .enable_ms = bfin_serial_enable_ms, + .break_ctl = bfin_serial_break_ctl, + .startup = bfin_serial_startup, + .shutdown = bfin_serial_shutdown, + .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, + .type = bfin_serial_type, + .release_port = bfin_serial_release_port, + .request_port = bfin_serial_request_port, + .config_port = bfin_serial_config_port, + .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, + int *parity, int *bits) +{ + unsigned short status; + + status = UART_GET_IER(uart) & (ERBFI | ETBEI); + if (status == (ERBFI | ETBEI)) { + /* ok, the port was enabled */ + u16 lcr, dlh, dll; + + lcr = UART_GET_LCR(uart); + + *parity = 'n'; + if (lcr & PEN) { + if (lcr & EPS) + *parity = 'e'; + else + *parity = 'o'; + } + switch (lcr & 0x03) { + case 0: *bits = 5; break; + case 1: *bits = 6; break; + case 2: *bits = 7; break; + case 3: *bits = 8; break; + } + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + dll = UART_GET_DLL(uart); + dlh = UART_GET_DLH(uart); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + *baud = get_sclk() / (16*(dll | dlh << 8)); + } + pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); +} + +static struct uart_driver bfin_serial_reg; + +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); +} + +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#define CLASS_BFIN_CONSOLE "bfin-console" +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = bfin_serial_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + +} + +static int __init +bfin_serial_console_setup(struct console *co, char *options) +{ + struct bfin_serial_port *uart; + int baud = 57600; + int bits = 8; + int parity = 'n'; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + int flow = 'r'; +# else + int flow = 'n'; +# endif + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) + return -ENODEV; + + uart = bfin_serial_ports[co->index]; + if (!uart) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + bfin_serial_console_get_options(uart, &baud, &parity, &bits); + + return uart_set_options(&uart->port, co, baud, parity, bits, flow); +} + +static struct console bfin_serial_console = { + .name = BFIN_SERIAL_DEV_NAME, + .write = bfin_serial_console_write, + .device = uart_console_device, + .setup = bfin_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#define BFIN_SERIAL_CONSOLE &bfin_serial_console +#else +#define BFIN_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + +#ifdef CONFIG_EARLY_PRINTK +static struct bfin_serial_port bfin_earlyprintk_port; +#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" + +/* + * Interrupts are disabled on entering + */ +static void +bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) +{ + unsigned long flags; + + if (bfin_earlyprintk_port.port.line != co->index) + return; + + spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); + uart_console_write(&bfin_earlyprintk_port.port, s, count, + bfin_serial_console_putchar); + spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); +} + +/* + * This should have a .setup or .early_setup in it, but then things get called + * without the command line options, and the baud rate gets messed up - so + * don't let the common infrastructure play with things. (see calls to setup + * & earlysetup in ./kernel/printk.c:register_console() + */ +static struct __initdata console bfin_early_serial_console = { + .name = "early_BFuart", + .write = bfin_earlyprintk_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#endif + +static struct uart_driver bfin_serial_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = BFIN_SERIAL_DEV_NAME, + .major = BFIN_SERIAL_MAJOR, + .minor = BFIN_SERIAL_MINOR, + .nr = BFIN_UART_NR_PORTS, + .cons = BFIN_SERIAL_CONSOLE, +}; + +static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_suspend_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_resume(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_resume_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_probe(struct platform_device *pdev) +{ + struct resource *res; + struct bfin_serial_port *uart = NULL; + int ret = 0; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_serial_ports[pdev->id] == NULL) { + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + dev_err(&pdev->dev, + "fail to malloc bfin_serial_port\n"); + return -ENOMEM; + } + bfin_serial_ports[pdev->id] = uart; + +#ifdef CONFIG_EARLY_PRINTK + if (!(bfin_earlyprintk_port.port.membase + && bfin_earlyprintk_port.port.line == pdev->id)) { + /* + * If the peripheral PINs of current port is allocated + * in earlyprintk probe stage, don't do it again. + */ +#endif + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + goto out_error_free_mem; + } +#ifdef CONFIG_EARLY_PRINTK + } +#endif + + spin_lock_init(&uart->port.lock); + uart->port.uartclk = get_sclk(); + uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; + uart->port.ops = &bfin_serial_pops; + uart->port.line = pdev->id; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + uart->port.membase = ioremap(res->start, + res->end - res->start); + if (!uart->port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + uart->port.mapbase = res->start; + + uart->port.irq = platform_get_irq(pdev, 0); + if (uart->port.irq < 0) { + dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + uart->status_irq = platform_get_irq(pdev, 1); + if (uart->status_irq < 0) { + dev_err(&pdev->dev, "No uart status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + +#ifdef CONFIG_SERIAL_BFIN_DMA + uart->tx_done = 1; + uart->tx_count = 0; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->tx_dma_channel = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->rx_dma_channel = res->start; + + init_timer(&(uart->rx_dma_timer)); +#endif + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + uart->cts_pin = -1; + else + uart->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + uart->rts_pin = -1; + else + uart->rts_pin = res->start; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) + if (uart->rts_pin >= 0) + gpio_request(uart->rts_pin, DRIVER_NAME); +# endif +#endif + } + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + uart = bfin_serial_ports[pdev->id]; + uart->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, uart); + ret = uart_add_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + } +#endif + + if (!ret) + return 0; + + if (uart) { +out_error_unmap: + iounmap(uart->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return ret; +} + +static int __devexit bfin_serial_remove(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + dev_set_drvdata(&pdev->dev, NULL); + + if (uart) { + uart_remove_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); +#endif + iounmap(uart->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return 0; +} + +static struct platform_driver bfin_serial_driver = { + .probe = bfin_serial_probe, + .remove = __devexit_p(bfin_serial_remove), + .suspend = bfin_serial_suspend, + .resume = bfin_serial_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) +static __initdata struct early_platform_driver early_bfin_serial_driver = { + .class_str = CLASS_BFIN_CONSOLE, + .pdrv = &bfin_serial_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init bfin_serial_rs_console_init(void) +{ + early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); + + early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); + + register_console(&bfin_serial_console); + + return 0; +} +console_initcall(bfin_serial_rs_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +/* + * Memory can't be allocated dynamically during earlyprink init stage. + * So, do individual probe for earlyprink with a static uart port variable. + */ +static int bfin_earlyprintk_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); + return -ENOENT; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + bfin_earlyprintk_port.port.membase = ioremap(res->start, + res->end - res->start); + if (!bfin_earlyprintk_port.port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + bfin_earlyprintk_port.port.mapbase = res->start; + bfin_earlyprintk_port.port.line = pdev->id; + bfin_earlyprintk_port.port.uartclk = get_sclk(); + bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; + spin_lock_init(&bfin_earlyprintk_port.port.lock); + + return 0; + +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + + return ret; +} + +static struct platform_driver bfin_earlyprintk_driver = { + .probe = bfin_earlyprintk_probe, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { + .class_str = CLASS_BFIN_EARLYPRINTK, + .pdrv = &bfin_earlyprintk_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct ktermios t; + char port_name[20]; + + if (port < 0 || port >= BFIN_UART_NR_PORTS) + return NULL; + + /* + * Only probe resource of the given port in earlyprintk boot arg. + * The expected port id should be indicated in port name string. + */ + snprintf(port_name, 20, DRIVER_NAME ".%d", port); + early_platform_driver_register(&early_bfin_earlyprintk_driver, + port_name); + early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); + + if (!bfin_earlyprintk_port.port.membase) + return NULL; + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + /* + * If we are using early serial, don't let the normal console rewind + * log buffer, since that causes things to be printed multiple times + */ + bfin_serial_console.flags &= ~CON_PRINTBUFFER; +#endif + + bfin_early_serial_console.index = port; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); + + return &bfin_early_serial_console; +} +#endif /* CONFIG_EARLY_PRINTK */ + +static int __init bfin_serial_init(void) +{ + int ret; + + pr_info("Blackfin serial driver\n"); + + ret = uart_register_driver(&bfin_serial_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + bfin_serial_reg.driver_name, ret); + } + + ret = platform_driver_register(&bfin_serial_driver); + if (ret) { + pr_err("fail to register bfin uart\n"); + uart_unregister_driver(&bfin_serial_reg); + } + + return ret; +} + +static void __exit bfin_serial_exit(void) +{ + platform_driver_unregister(&bfin_serial_driver); + uart_unregister_driver(&bfin_serial_reg); +} + + +module_init(bfin_serial_init); +module_exit(bfin_serial_exit); + +MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); +MODULE_DESCRIPTION("Blackfin generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); +MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c new file mode 100644 index 0000000..e95c524 --- /dev/null +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -0,0 +1,935 @@ +/* + * Blackfin On-Chip Sport Emulated UART Driver + * + * Copyright 2006-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +/* #define DEBUG */ + +#define DRV_NAME "bfin-sport-uart" +#define DEVICE_NAME "ttySS" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "bfin_sport_uart.h" + +struct sport_uart_port { + struct uart_port port; + int err_irq; + unsigned short csize; + unsigned short rxmask; + unsigned short txmask1; + unsigned short txmask2; + unsigned char stopb; +/* unsigned char parib; */ +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +static int sport_uart_tx_chars(struct sport_uart_port *up); +static void sport_stop_tx(struct uart_port *port); + +static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) +{ + pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, + up->txmask1, up->txmask2); + + /* Place Start and Stop bits */ + __asm__ __volatile__ ( + "%[val] <<= 1;" + "%[val] = %[val] & %[mask1];" + "%[val] = %[val] | %[mask2];" + : [val]"+d"(value) + : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) + : "ASTAT" + ); + pr_debug("%s value:%x\n", __func__, value); + + SPORT_PUT_TX(up, value); +} + +static inline unsigned char rx_one_byte(struct sport_uart_port *up) +{ + unsigned int value; + unsigned char extract; + u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; + + if ((up->csize + up->stopb) > 7) + value = SPORT_GET_RX32(up); + else + value = SPORT_GET_RX(up); + + pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, + up->csize, up->rxmask); + + /* Extract data */ + __asm__ __volatile__ ( + "%[extr] = 0;" + "%[mask1] = %[rxmask];" + "%[mask2] = 0x0200(Z);" + "%[shift] = 0;" + "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" + ".Lloop_s:" + "%[tmp] = extract(%[val], %[mask1].L)(Z);" + "%[tmp] <<= %[shift];" + "%[extr] = %[extr] | %[tmp];" + "%[mask1] = %[mask1] - %[mask2];" + ".Lloop_e:" + "%[shift] += 1;" + : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), + [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) + : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) + : "ASTAT", "LB0", "LC0", "LT0" + ); + + pr_debug(" extract:%x\n", extract); + return extract; +} + +static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) +{ + int tclkdiv, rclkdiv; + unsigned int sclk = get_sclk(); + + /* Set TCR1 and TCR2, TFSR is not enabled for uart */ + SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); + SPORT_PUT_TCR2(up, size + 1); + pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); + + /* Set RCR1 and RCR2 */ + SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); + SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); + pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); + + tclkdiv = sclk / (2 * baud_rate) - 1; + /* The actual uart baud rate of devices vary between +/-2%. The sport + * RX sample rate should be faster than the double of the worst case, + * otherwise, wrong data are received. So, set sport RX clock to be + * 3% faster. + */ + rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1; + SPORT_PUT_TCLKDIV(up, tclkdiv); + SPORT_PUT_RCLKDIV(up, rclkdiv); + SSYNC(); + pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", + __func__, sclk, baud_rate, tclkdiv, rclkdiv); + + return 0; +} + +static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch; + + spin_lock(&up->port.lock); + + while (SPORT_GET_STAT(up) & RXNE) { + ch = rx_one_byte(up); + up->port.icount.rx++; + + if (!uart_handle_sysrq_char(&up->port, ch)) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + tty_flip_buffer_push(tty); + + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + + spin_lock(&up->port.lock); + sport_uart_tx_chars(up); + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + unsigned int stat = SPORT_GET_STAT(up); + + spin_lock(&up->port.lock); + + /* Overflow in RX FIFO */ + if (stat & ROVF) { + up->port.icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ + } + /* These should not happen */ + if (stat & (TOVF | TUVF | RUVF)) { + pr_err("SPORT Error:%s %s %s\n", + (stat & TOVF) ? "TX overflow" : "", + (stat & TUVF) ? "TX underflow" : "", + (stat & RUVF) ? "RX underflow" : ""); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + } + SSYNC(); + + spin_unlock(&up->port.lock); + return IRQ_HANDLED; +} + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS +static unsigned int sport_get_mctrl(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + if (up->cts_pin < 0) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (SPORT_UART_GET_CTS(up)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + if (up->rts_pin < 0) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + SPORT_UART_ENABLE_RTS(up); + else + SPORT_UART_DISABLE_RTS(up); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id) +{ + struct sport_uart_port *up = (struct sport_uart_port *)dev_id; + unsigned int status; + + status = sport_get_mctrl(&up->port); + uart_handle_cts_change(&up->port, status & TIOCM_CTS); + + return IRQ_HANDLED; +} +#else +static unsigned int sport_get_mctrl(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); + return TIOCM_CTS | TIOCM_CD | TIOCM_DSR; +} + +static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + pr_debug("%s enter\n", __func__); +} +#endif + +/* Reqeust IRQ, Setup clock */ +static int sport_startup(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + int ret; + + pr_debug("%s enter\n", __func__); + ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, + "SPORT_UART_RX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT RX interrupt\n"); + return ret; + } + + ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, + "SPORT_UART_TX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT TX interrupt\n"); + goto fail1; + } + + ret = request_irq(up->err_irq, sport_uart_err_irq, 0, + "SPORT_UART_STATUS", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT status interrupt\n"); + goto fail2; + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + if (up->cts_pin >= 0) { + if (request_irq(gpio_to_irq(up->cts_pin), + sport_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { + up->cts_pin = -1; + dev_info(port->dev, "Unable to attach BlackFin UART \ + over SPORT CTS interrupt. So, disable it.\n"); + } + } + if (up->rts_pin >= 0) + gpio_direction_output(up->rts_pin, 0); +#endif + + return 0; + fail2: + free_irq(up->port.irq+1, up); + fail1: + free_irq(up->port.irq, up); + + return ret; +} + +/* + * sport_uart_tx_chars + * + * ret 1 means need to enable sport. + * ret 0 means do nothing. + */ +static int sport_uart_tx_chars(struct sport_uart_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + + if (SPORT_GET_STAT(up) & TXF) + return 0; + + if (up->port.x_char) { + tx_one_byte(up, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + /* The waiting loop to stop SPORT TX from TX interrupt is + * too long. This may block SPORT RX interrupts and cause + * RX FIFO overflow. So, do stop sport TX only after the last + * char in TX FIFO is moved into the shift register. + */ + if (SPORT_GET_STAT(up) & TXHRE) + sport_stop_tx(&up->port); + return 0; + } + + while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) { + tx_one_byte(up, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + up->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return 1; +} + +static unsigned int sport_tx_empty(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned int stat; + + stat = SPORT_GET_STAT(up); + pr_debug("%s stat:%04x\n", __func__, stat); + if (stat & TXHRE) { + return TIOCSER_TEMT; + } else + return 0; +} + +static void sport_stop_tx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + + if (!(SPORT_GET_TCR1(up) & TSPEN)) + return; + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); + + return; +} + +static void sport_start_tx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + + /* Write data into SPORT FIFO before enable SPROT to transmit */ + if (sport_uart_tx_chars(up)) { + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + } + + pr_debug("%s exit\n", __func__); +} + +static void sport_stop_rx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + /* Disable sport to stop rx */ + SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); + SSYNC(); +} + +static void sport_enable_ms(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); +} + +static void sport_break_ctl(struct uart_port *port, int break_state) +{ + pr_debug("%s enter\n", __func__); +} + +static void sport_shutdown(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + dev_dbg(port->dev, "%s enter\n", __func__); + + /* Disable sport */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); + SSYNC(); + + free_irq(up->port.irq, up); + free_irq(up->port.irq+1, up); + free_irq(up->err_irq, up); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + if (up->cts_pin >= 0) + free_irq(gpio_to_irq(up->cts_pin), up); +#endif +} + +static const char *sport_type(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; +} + +static void sport_release_port(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); +} + +static int sport_request_port(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); + return 0; +} + +static void sport_config_port(struct uart_port *port, int flags) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + up->port.type = PORT_BFIN_SPORT; +} + +static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + pr_debug("%s enter\n", __func__); + return 0; +} + +static void sport_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned long flags; + int i; + + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); + + switch (termios->c_cflag & CSIZE) { + case CS8: + up->csize = 8; + break; + case CS7: + up->csize = 7; + break; + case CS6: + up->csize = 6; + break; + case CS5: + up->csize = 5; + break; + default: + pr_warning("requested word length not supported\n"); + } + + if (termios->c_cflag & CSTOPB) { + up->stopb = 1; + } + if (termios->c_cflag & PARENB) { + pr_warning("PAREN bits is not supported yet\n"); + /* up->parib = 1; */ + } + + spin_lock_irqsave(&up->port.lock, flags); + + port->read_status_mask = 0; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + + /* RX extract mask */ + up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); + /* TX masks, 8 bit data and 1 bit stop for example: + * mask1 = b#0111111110 + * mask2 = b#1000000000 + */ + for (i = 0, up->txmask1 = 0; i < up->csize; i++) + up->txmask1 |= (1<txmask2 = (1<stopb) { + ++i; + up->txmask2 |= (1<txmask1 <<= 1; + up->txmask2 <<= 1; + /* uart baud rate */ + port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); + + /* Disable UART */ + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + + sport_uart_setup(up, up->csize + up->stopb, port->uartclk); + + /* driver TX line high after config, one dummy data is + * necessary to stop sport after shift one byte + */ + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SSYNC(); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk); + + /* Enable sport rx */ + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); + SSYNC(); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +struct uart_ops sport_uart_ops = { + .tx_empty = sport_tx_empty, + .set_mctrl = sport_set_mctrl, + .get_mctrl = sport_get_mctrl, + .stop_tx = sport_stop_tx, + .start_tx = sport_start_tx, + .stop_rx = sport_stop_rx, + .enable_ms = sport_enable_ms, + .break_ctl = sport_break_ctl, + .startup = sport_startup, + .shutdown = sport_shutdown, + .set_termios = sport_set_termios, + .type = sport_type, + .release_port = sport_release_port, + .request_port = sport_request_port, + .config_port = sport_config_port, + .verify_port = sport_verify_port, +}; + +#define BFIN_SPORT_UART_MAX_PORTS 4 + +static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console" + +static int __init +sport_uart_console_setup(struct console *co, char *options) +{ + struct sport_uart_port *up; + int baud = 57600; + int bits = 8; + int parity = 'n'; +# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + int flow = 'r'; +# else + int flow = 'n'; +# endif + + /* Check whether an invalid uart number has been specified */ + if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) + return -ENODEV; + + up = bfin_sport_uart_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static void sport_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + while (SPORT_GET_STAT(up) & TXF) + barrier(); + + tx_one_byte(up, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sport_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + if (SPORT_GET_TCR1(up) & TSPEN) + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + else { + /* dummy data to start sport */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + barrier(); + + /* Stop sport tx transfer */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); + } + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sport_uart_reg; + +static struct console sport_uart_console = { + .name = DEVICE_NAME, + .write = sport_uart_console_write, + .device = uart_console_device, + .setup = sport_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sport_uart_reg, +}; + +#define SPORT_UART_CONSOLE (&sport_uart_console) +#else +#define SPORT_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ + + +static struct uart_driver sport_uart_reg = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = DEVICE_NAME, + .major = 204, + .minor = 84, + .nr = BFIN_SPORT_UART_MAX_PORTS, + .cons = SPORT_UART_CONSOLE, +}; + +#ifdef CONFIG_PM +static int sport_uart_suspend(struct device *dev) +{ + struct sport_uart_port *sport = dev_get_drvdata(dev); + + dev_dbg(dev, "%s enter\n", __func__); + if (sport) + uart_suspend_port(&sport_uart_reg, &sport->port); + + return 0; +} + +static int sport_uart_resume(struct device *dev) +{ + struct sport_uart_port *sport = dev_get_drvdata(dev); + + dev_dbg(dev, "%s enter\n", __func__); + if (sport) + uart_resume_port(&sport_uart_reg, &sport->port); + + return 0; +} + +static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { + .suspend = sport_uart_suspend, + .resume = sport_uart_resume, +}; +#endif + +static int __devinit sport_uart_probe(struct platform_device *pdev) +{ + struct resource *res; + struct sport_uart_port *sport; + int ret = 0; + + dev_dbg(&pdev->dev, "%s enter\n", __func__); + + if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { + dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_sport_uart_ports[pdev->id] == NULL) { + bfin_sport_uart_ports[pdev->id] = + kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL); + sport = bfin_sport_uart_ports[pdev->id]; + if (!sport) { + dev_err(&pdev->dev, + "Fail to malloc sport_uart_port\n"); + return -ENOMEM; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, + "Fail to request SPORT peripherals\n"); + goto out_error_free_mem; + } + + spin_lock_init(&sport->port.lock); + sport->port.fifosize = SPORT_TX_FIFO_SIZE, + sport->port.ops = &sport_uart_ops; + sport->port.line = pdev->id; + sport->port.iotype = UPIO_MEM; + sport->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + sport->port.membase = ioremap(res->start, resource_size(res)); + if (!sport->port.membase) { + dev_err(&pdev->dev, "Cannot map sport IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + sport->port.mapbase = res->start; + + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->port.irq < 0) { + dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + sport->err_irq = platform_get_irq(pdev, 1); + if (sport->err_irq < 0) { + dev_err(&pdev->dev, "No sport status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + sport->cts_pin = -1; + else + sport->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + sport->rts_pin = -1; + else + sport->rts_pin = res->start; + + if (sport->rts_pin >= 0) + gpio_request(sport->rts_pin, DRV_NAME); +#endif + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + sport = bfin_sport_uart_ports[pdev->id]; + sport->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, sport); + ret = uart_add_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + } +#endif + if (!ret) + return 0; + + if (sport) { +out_error_unmap: + iounmap(sport->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return ret; +} + +static int __devexit sport_uart_remove(struct platform_device *pdev) +{ + struct sport_uart_port *sport = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s enter\n", __func__); + dev_set_drvdata(&pdev->dev, NULL); + + if (sport) { + uart_remove_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (sport->rts_pin >= 0) + gpio_free(sport->rts_pin); +#endif + iounmap(sport->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return 0; +} + +static struct platform_driver sport_uart_driver = { + .probe = sport_uart_probe, + .remove = __devexit_p(sport_uart_remove), + .driver = { + .name = DRV_NAME, +#ifdef CONFIG_PM + .pm = &bfin_sport_uart_dev_pm_ops, +#endif + }, +}; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static __initdata struct early_platform_driver early_sport_uart_driver = { + .class_str = CLASS_BFIN_SPORT_CONSOLE, + .pdrv = &sport_uart_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init sport_uart_rs_console_init(void) +{ + early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); + + early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE, + BFIN_SPORT_UART_MAX_PORTS, 0); + + register_console(&sport_uart_console); + + return 0; +} +console_initcall(sport_uart_rs_console_init); +#endif + +static int __init sport_uart_init(void) +{ + int ret; + + pr_info("Blackfin uart over sport driver\n"); + + ret = uart_register_driver(&sport_uart_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + sport_uart_reg.driver_name, ret); + return ret; + } + + ret = platform_driver_register(&sport_uart_driver); + if (ret) { + pr_err("failed to register sport uart driver:%d\n", ret); + uart_unregister_driver(&sport_uart_reg); + } + + return ret; +} +module_init(sport_uart_init); + +static void __exit sport_uart_exit(void) +{ + platform_driver_unregister(&sport_uart_driver); + uart_unregister_driver(&sport_uart_reg); +} +module_exit(sport_uart_exit); + +MODULE_AUTHOR("Sonic Zhang, Roy Huang"); +MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h new file mode 100644 index 0000000..6d06ce1 --- /dev/null +++ b/drivers/tty/serial/bfin_sport_uart.h @@ -0,0 +1,86 @@ +/* + * Blackfin On-Chip Sport Emulated UART Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H + +#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ +#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ +#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ +#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ +#define OFFSET_TX 0x10 /* Transmit Data Register */ +#define OFFSET_RX 0x18 /* Receive Data Register */ +#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ +#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ +#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ +#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ +#define OFFSET_STAT 0x30 /* Status Register */ + +#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) +#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) +#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) +#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) +#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) +#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) +/* + * If another interrupt fires while doing a 32-bit read from RX FIFO, + * a fake RX underflow error will be generated. So disable interrupts + * to prevent interruption while reading the FIFO. + */ +#define SPORT_GET_RX32(sport) \ +({ \ + unsigned int __ret; \ + if (ANOMALY_05000473) \ + local_irq_disable(); \ + __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ + if (ANOMALY_05000473) \ + local_irq_enable(); \ + __ret; \ +}) +#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) +#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) +#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) +#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) +#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) + +#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) +#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) +#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) +#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) +#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) +#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) +#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) +#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) +#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) +#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) +#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) + +#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) +# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS +#endif + +#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c new file mode 100644 index 0000000..b6acd19 --- /dev/null +++ b/drivers/tty/serial/clps711x.c @@ -0,0 +1,579 @@ +/* + * linux/drivers/char/clps711x.c + * + * Driver for CLPS711x serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define UART_NR 2 + +#define SERIAL_CLPS711X_MAJOR 204 +#define SERIAL_CLPS711X_MINOR 40 +#define SERIAL_CLPS711X_NR UART_NR + +/* + * We use the relevant SYSCON register as a base address for these ports. + */ +#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) +#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) +#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) +#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) + +#define TX_IRQ(port) ((port)->irq) +#define RX_IRQ(port) ((port)->irq + 1) + +#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) + +#define tx_enabled(port) ((port)->unused[0]) + +static void clps711xuart_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + disable_irq(TX_IRQ(port)); + tx_enabled(port) = 0; + } +} + +static void clps711xuart_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(TX_IRQ(port)); + tx_enabled(port) = 1; + } +} + +static void clps711xuart_stop_rx(struct uart_port *port) +{ + disable_irq(RX_IRQ(port)); +} + +static void clps711xuart_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, flg; + + status = clps_readl(SYSFLG(port)); + while (!(status & SYSFLG_URXFE)) { + ch = clps_readl(UARTDR(port)); + + port->icount.rx++; + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (unlikely(ch & UART_ANY_ERR)) { + if (ch & UARTDR_PARERR) + port->icount.parity++; + else if (ch & UARTDR_FRMERR) + port->icount.frame++; + if (ch & UARTDR_OVERR) + port->icount.overrun++; + + ch &= port->read_status_mask; + + if (ch & UARTDR_PARERR) + flg = TTY_PARITY; + else if (ch & UARTDR_FRMERR) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); + + ignore_char: + status = clps_readl(SYSFLG(port)); + } + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + +static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + clps_writel(port->x_char, UARTDR(port)); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + clps711xuart_stop_tx(port); + return IRQ_HANDLED; + } + + count = port->fifosize >> 1; + do { + clps_writel(xmit->buf[xmit->tail], UARTDR(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + clps711xuart_stop_tx(port); + + return IRQ_HANDLED; +} + +static unsigned int clps711xuart_tx_empty(struct uart_port *port) +{ + unsigned int status = clps_readl(SYSFLG(port)); + return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int clps711xuart_get_mctrl(struct uart_port *port) +{ + unsigned int port_addr; + unsigned int result = 0; + unsigned int status; + + port_addr = SYSFLG(port); + if (port_addr == SYSFLG1) { + status = clps_readl(SYSFLG1); + if (status & SYSFLG1_DCD) + result |= TIOCM_CAR; + if (status & SYSFLG1_DSR) + result |= TIOCM_DSR; + if (status & SYSFLG1_CTS) + result |= TIOCM_CTS; + } + + return result; +} + +static void +clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) +{ +} + +static void clps711xuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ubrlcr; + + spin_lock_irqsave(&port->lock, flags); + ubrlcr = clps_readl(UBRLCR(port)); + if (break_state == -1) + ubrlcr |= UBRLCR_BREAK; + else + ubrlcr &= ~UBRLCR_BREAK; + clps_writel(ubrlcr, UBRLCR(port)); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int clps711xuart_startup(struct uart_port *port) +{ + unsigned int syscon; + int retval; + + tx_enabled(port) = 1; + + /* + * Allocate the IRQs + */ + retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, + "clps711xuart_tx", port); + if (retval) + return retval; + + retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, + "clps711xuart_rx", port); + if (retval) { + free_irq(TX_IRQ(port), port); + return retval; + } + + /* + * enable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon |= SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + return 0; +} + +static void clps711xuart_shutdown(struct uart_port *port) +{ + unsigned int ubrlcr, syscon; + + /* + * Free the interrupt + */ + free_irq(TX_IRQ(port), port); /* TX interrupt */ + free_irq(RX_IRQ(port), port); /* RX interrupt */ + + /* + * disable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon &= ~SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + /* + * disable break condition and fifos + */ + ubrlcr = clps_readl(UBRLCR(port)); + ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); + clps_writel(ubrlcr, UBRLCR(port)); +} + +static void +clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int ubrlcr, baud, quot; + unsigned long flags; + + /* + * We don't implement CREAD. + */ + termios->c_cflag |= CREAD; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + ubrlcr = UBRLCR_WRDLEN5; + break; + case CS6: + ubrlcr = UBRLCR_WRDLEN6; + break; + case CS7: + ubrlcr = UBRLCR_WRDLEN7; + break; + default: // CS8 + ubrlcr = UBRLCR_WRDLEN8; + break; + } + if (termios->c_cflag & CSTOPB) + ubrlcr |= UBRLCR_XSTOP; + if (termios->c_cflag & PARENB) { + ubrlcr |= UBRLCR_PRTEN; + if (!(termios->c_cflag & PARODD)) + ubrlcr |= UBRLCR_EVENPRT; + } + if (port->fifosize > 1) + ubrlcr |= UBRLCR_FIFOEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UARTDR_OVERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; + if (termios->c_iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_OVERR; + } + + quot -= 1; + + clps_writel(ubrlcr | quot, UBRLCR(port)); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *clps711xuart_type(struct uart_port *port) +{ + return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; +} + +/* + * Configure/autoconfigure the port. + */ +static void clps711xuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_CLPS711X; +} + +static void clps711xuart_release_port(struct uart_port *port) +{ +} + +static int clps711xuart_request_port(struct uart_port *port) +{ + return 0; +} + +static struct uart_ops clps711x_pops = { + .tx_empty = clps711xuart_tx_empty, + .set_mctrl = clps711xuart_set_mctrl_null, + .get_mctrl = clps711xuart_get_mctrl, + .stop_tx = clps711xuart_stop_tx, + .start_tx = clps711xuart_start_tx, + .stop_rx = clps711xuart_stop_rx, + .enable_ms = clps711xuart_enable_ms, + .break_ctl = clps711xuart_break_ctl, + .startup = clps711xuart_startup, + .shutdown = clps711xuart_shutdown, + .set_termios = clps711xuart_set_termios, + .type = clps711xuart_type, + .config_port = clps711xuart_config_port, + .release_port = clps711xuart_release_port, + .request_port = clps711xuart_request_port, +}; + +static struct uart_port clps711x_ports[UART_NR] = { + { + .iobase = SYSCON1, + .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 0, + .flags = UPF_BOOT_AUTOCONF, + }, + { + .iobase = SYSCON2, + .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 1, + .flags = UPF_BOOT_AUTOCONF, + } +}; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +static void clps711xuart_console_putchar(struct uart_port *port, int ch) +{ + while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) + barrier(); + clps_writel(ch, UARTDR(port)); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + * + * Note that this is called with interrupts already disabled + */ +static void +clps711xuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = clps711x_ports + co->index; + unsigned int status, syscon; + + /* + * Ensure that the port is enabled. + */ + syscon = clps_readl(SYSCON(port)); + clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); + + uart_console_write(port, s, count, clps711xuart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the uart state. + */ + do { + status = clps_readl(SYSFLG(port)); + } while (status & SYSFLG_UBUSY); + + clps_writel(syscon, SYSCON(port)); +} + +static void __init +clps711xuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { + unsigned int ubrlcr, quot; + + ubrlcr = clps_readl(UBRLCR(port)); + + *parity = 'n'; + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + *bits = 7; + else + *bits = 8; + + quot = ubrlcr & UBRLCR_BAUD_MASK; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init clps711xuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(clps711x_ports, UART_NR, co); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + clps711xuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver clps711x_reg; +static struct console clps711x_console = { + .name = "ttyCL", + .write = clps711xuart_console_write, + .device = uart_console_device, + .setup = clps711xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &clps711x_reg, +}; + +static int __init clps711xuart_console_init(void) +{ + register_console(&clps711x_console); + return 0; +} +console_initcall(clps711xuart_console_init); + +#define CLPS711X_CONSOLE &clps711x_console +#else +#define CLPS711X_CONSOLE NULL +#endif + +static struct uart_driver clps711x_reg = { + .driver_name = "ttyCL", + .dev_name = "ttyCL", + .major = SERIAL_CLPS711X_MAJOR, + .minor = SERIAL_CLPS711X_MINOR, + .nr = UART_NR, + + .cons = CLPS711X_CONSOLE, +}; + +static int __init clps711xuart_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: CLPS711x driver\n"); + + ret = uart_register_driver(&clps711x_reg); + if (ret) + return ret; + + for (i = 0; i < UART_NR; i++) + uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); + + return 0; +} + +static void __exit clps711xuart_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); + + uart_unregister_driver(&clps711x_reg); +} + +module_init(clps711xuart_init); +module_exit(clps711xuart_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("CLPS-711x generic serial driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/tty/serial/cpm_uart/Makefile b/drivers/tty/serial/cpm_uart/Makefile new file mode 100644 index 0000000..e072724 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Motorola 8xx FEC ethernet controller +# + +obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o + +# Select the correct platform objects. +cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o +cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o + +cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h new file mode 100644 index 0000000..b754dcf --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,147 @@ +/* + * linux/drivers/serial/cpm_uart.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include +#include + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_8xx) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart + +#define UART_NR fs_uart_nr + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define SCC_WAIT_CLOSING 100 + +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + struct clk *clk; + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + u32 mem_size; + /* wait on close if needed */ + int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; + int gpios[NUM_GPIOS]; +}; + +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; + /* sane check */ + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; + } + /* something nasty happened */ + BUG(); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; + /* sane check */ + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; + } + /* something nasty happened */ + BUG(); + return NULL; +} + + +#endif /* CPM_UART_H */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c new file mode 100644 index 0000000..8692ff9 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -0,0 +1,1443 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; core driver + * + * Based on arch/ppc/cpm2_io/uart.c by Dan Malek + * Based on ppc8xx.c by Thomas Gleixner + * Based on drivers/serial/amba.c by Russell King + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "cpm_uart.h" + + +/**************************************************************/ + +static int cpm_uart_tx_pump(struct uart_port *port); +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); +static void cpm_uart_initbd(struct uart_cpm_port *pinfo); + +/**************************************************************/ + +#define HW_BUF_SPD_THRESHOLD 9600 + +/* + * Check, if transmit buffers are processed +*/ +static unsigned int cpm_uart_tx_empty(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp = pinfo->tx_bd_base; + int ret = 0; + + while (1) { + if (in_be16(&bdp->cbd_sc) & BD_SC_READY) + break; + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { + ret = TIOCSER_TEMT; + break; + } + bdp++; + } + + pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); + + return ret; +} + +static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); +} + +static unsigned int cpm_uart_get_mctrl(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; +} + +/* + * Stop transmitter + */ +static void cpm_uart_stop_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop tx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_TX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_TX); +} + +/* + * Start transmitter + */ +static void cpm_uart_start_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:start tx\n", port->line); + + if (IS_SMC(pinfo)) { + if (in_8(&smcp->smc_smcm) & SMCM_TX) + return; + } else { + if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) + return; + } + + if (cpm_uart_tx_pump(port) != 0) { + if (IS_SMC(pinfo)) { + setbits8(&smcp->smc_smcm, SMCM_TX); + } else { + setbits16(&sccp->scc_sccm, UART_SCCM_TX); + } + } +} + +/* + * Stop receiver + */ +static void cpm_uart_stop_rx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop rx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_RX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_RX); +} + +/* + * Enable Modem status interrupts + */ +static void cpm_uart_enable_ms(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:enable ms\n", port->line); +} + +/* + * Generate a break. + */ +static void cpm_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, + break_state); + + if (break_state) + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static void cpm_uart_int_tx(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:TX INT\n", port->line); + + cpm_uart_tx_pump(port); +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + * Receive characters + */ +static void cpm_uart_int_rx(struct uart_port *port) +{ + int i; + unsigned char ch; + u8 *cp; + struct tty_struct *tty = port->state->port.tty; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp; + u16 status; + unsigned int flg; + + pr_debug("CPM uart[%d]:RX INT\n", port->line); + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = pinfo->rx_cur; + for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + /* get status */ + status = in_be16(&bdp->cbd_sc); + /* If this one is empty, return happy */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check spce in flip-buffer */ + i = in_be16(&bdp->cbd_datlen); + + /* If we have not enough room in tty flip buffer, then we try + * later, which will be the next rx-interrupt or a timeout + */ + if(tty_buffer_request_room(tty, i) < i) { + printk(KERN_WARNING "No room in flip buffer\n"); + return; + } + + /* get pointer */ + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + error_return: + tty_insert_flip_char(tty, ch, flg); + + } /* End while (i--) */ + + /* This BD is ready to be used again. Clear status. get next */ + clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID); + setbits16(&bdp->cbd_sc, BD_SC_EMPTY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + + } /* End for (;;) */ + + /* Write back buffer pointer */ + pinfo->rx_cur = bdp; + + /* activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + + handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* overrun does not affect the current character ! */ + if (status & BD_SC_OV) { + ch = 0; + flg = TTY_OVERRUN; + /* We skip this buffer */ + /* CHECK: Is really nothing senseful there */ + /* ASSUMPTION: it contains nothing valid */ + i = 0; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* + * Asynchron mode interrupt handler + */ +static irqreturn_t cpm_uart_int(int irq, void *data) +{ + u8 events; + struct uart_port *port = data; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:IRQ\n", port->line); + + if (IS_SMC(pinfo)) { + events = in_8(&smcp->smc_smce); + out_8(&smcp->smc_smce, events); + if (events & SMCM_BRKE) + uart_handle_break(port); + if (events & SMCM_RX) + cpm_uart_int_rx(port); + if (events & SMCM_TX) + cpm_uart_int_tx(port); + } else { + events = in_be16(&sccp->scc_scce); + out_be16(&sccp->scc_scce, events); + if (events & UART_SCCM_BRKE) + uart_handle_break(port); + if (events & UART_SCCM_RX) + cpm_uart_int_rx(port); + if (events & UART_SCCM_TX) + cpm_uart_int_tx(port); + } + return (events) ? IRQ_HANDLED : IRQ_NONE; +} + +static int cpm_uart_startup(struct uart_port *port) +{ + int retval; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:startup\n", port->line); + + /* If the port is not the console, make sure rx is disabled. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Disable UART rx */ + if (IS_SMC(pinfo)) { + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + } else { + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + } + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } + /* Install interrupt handler. */ + retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); + if (retval) + return retval; + + /* Startup rx-int */ + if (IS_SMC(pinfo)) { + setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); + } else { + setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); + } + + return 0; +} + +inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) +{ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(pinfo->wait_closing); +} + +/* + * Shutdown the uart + */ +static void cpm_uart_shutdown(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:shutdown\n", port->line); + + /* free interrupt handler */ + free_irq(port->irq, port); + + /* If the port is not the console, disable Rx and Tx. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Wait for all the BDs marked sent */ + while(!cpm_uart_tx_empty(port)) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (pinfo->wait_closing) + cpm_uart_wait_until_send(pinfo); + + /* Stop uarts */ + if (IS_SMC(pinfo)) { + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); + } else { + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + } + + /* Shut them really down and reinit buffer descriptors */ + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } + + cpm_uart_initbd(pinfo); + } +} + +static void cpm_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + int baud; + unsigned long flags; + u16 cval, scval, prev_mode; + int bits, sbits; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:set_termios\n", port->line); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud <= HW_BUF_SPD_THRESHOLD || + (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) + pinfo->rx_fifosize = 1; + else + pinfo->rx_fifosize = RX_BUF_SIZE; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + case CS8: + bits = 8; + break; + /* Never happens, but GCC is too dumb to figure it out */ + default: + bits = 8; + break; + } + sbits = bits - 5; + + if (termios->c_cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PSMR_SL; + bits++; + } + + if (termios->c_cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PSMR_PEN; + bits++; + if (!(termios->c_cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); + } + } + + /* + * Update the timeout + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + spin_lock_irqsave(&port->lock, flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + if (IS_SMC(pinfo)) { + /* + * MRBLR can be changed while an SMC/SCC is operating only + * if it is done in a single bus cycle with one 16-bit move + * (not two 8-bit bus cycles back-to-back). This occurs when + * the cp shifts control to the next RxBD, so the change does + * not take effect immediately. To guarantee the exact RxBD + * on which the change occurs, change MRBLR only while the + * SMC/SCC receiver is disabled. + */ + out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); + } else { + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + } + + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *cpm_uart_type(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:uart_type\n", port->line); + + return port->type == PORT_CPM ? "CPM UART" : NULL; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int cpm_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + pr_debug("CPM uart[%d]:verify_port\n", port->line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static int cpm_uart_tx_pump(struct uart_port *port) +{ + cbd_t __iomem *bdp; + u8 *p; + int count; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + struct circ_buf *xmit = &port->state->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + *p++ = port->x_char; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + pinfo->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + cpm_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && + xmit->tail != xmit->head) { + count = 0; + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + while (count < pinfo->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + out_be16(&bdp->cbd_datlen, count); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + } + pinfo->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + cpm_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * init buffer descriptors + */ +static void cpm_uart_initbd(struct uart_cpm_port *pinfo) +{ + int i; + u8 *mem_addr; + cbd_t __iomem *bdp; + + pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr; + bdp = pinfo->rx_cur = pinfo->rx_bd_base; + for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); + mem_addr += pinfo->rx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); + bdp = pinfo->tx_cur = pinfo->tx_bd_base; + for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_INTRPT); + mem_addr += pinfo->tx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); +} + +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) +{ + scc_t __iomem *scp; + scc_uart_t __iomem *sup; + + pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); + + scp = pinfo->sccp; + sup = pinfo->sccup; + + /* Store address */ + out_be16(&pinfo->sccup->scc_genscc.scc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->sccup->scc_genscc.scc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + + /* Set up the uart parameters in the + * parameter ram. + */ + + cpm_set_scc_fcr(sup); + + out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); + out_be16(&sup->scc_brkcr, 1); + out_be16(&sup->scc_parec, 0); + out_be16(&sup->scc_frmec, 0); + out_be16(&sup->scc_nosec, 0); + out_be16(&sup->scc_brkec, 0); + out_be16(&sup->scc_uaddr1, 0); + out_be16(&sup->scc_uaddr2, 0); + out_be16(&sup->scc_toseq, 0); + out_be16(&sup->scc_char1, 0x8000); + out_be16(&sup->scc_char2, 0x8000); + out_be16(&sup->scc_char3, 0x8000); + out_be16(&sup->scc_char4, 0x8000); + out_be16(&sup->scc_char5, 0x8000); + out_be16(&sup->scc_char6, 0x8000); + out_be16(&sup->scc_char7, 0x8000); + out_be16(&sup->scc_char8, 0x8000); + out_be16(&sup->scc_rccm, 0xc0ff); + + /* Send the CPM an initialize command. + */ + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be32(&scp->scc_gsmrh, 0); + out_be32(&scp->scc_gsmrl, + SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Enable rx interrupts and clear all pending events. */ + out_be16(&scp->scc_sccm, 0); + out_be16(&scp->scc_scce, 0xffff); + out_be16(&scp->scc_dsr, 0x7e7e); + out_be16(&scp->scc_psmr, 0x3000); + + setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) +{ + smc_t __iomem *sp; + smc_uart_t __iomem *up; + + pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); + + sp = pinfo->smcp; + up = pinfo->smcup; + + /* Store address */ + out_be16(&pinfo->smcup->smc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->smcup->smc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + +/* + * In case SMC1 is being relocated... + */ +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); + out_be32(&up->smc_rstate, 0); + out_be32(&up->smc_tstate, 0); + out_be16(&up->smc_brkcr, 1); /* number of break chars */ + out_be16(&up->smc_brkec, 0); +#endif + + /* Set up the uart parameters in the + * parameter ram. + */ + cpm_set_smc_fcr(up); + + /* Using idle character time requires some additional tuning. */ + out_be16(&up->smc_mrblr, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, pinfo->rx_fifosize); + out_be16(&up->smc_brklen, 0); + out_be16(&up->smc_brkec, 0); + out_be16(&up->smc_brkcr, 1); + + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); + + /* Enable only rx interrupts clear all pending events. */ + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); + + setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); +} + +/* + * Initialize port. This is called from early_console stuff + * so we have to be careful here ! + */ +static int cpm_uart_request_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int ret; + + pr_debug("CPM uart[%d]:request port\n", port->line); + + if (pinfo->flags & FLAG_CONSOLE) + return 0; + + if (IS_SMC(pinfo)) { + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 0); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + return 0; +} + +static void cpm_uart_release_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_uart_freebuf(pinfo); +} + +/* + * Configure/autoconfigure the port. + */ +static void cpm_uart_config_port(struct uart_port *port, int flags) +{ + pr_debug("CPM uart[%d]:config_port\n", port->line); + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + cpm_uart_request_port(port); + } +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + while (bdp->cbd_sc & BD_SC_EMPTY) + ; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + poll_chars = poll_wait_key(poll_buf, pinfo); + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo, ch, 1); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops cpm_uart_pops = { + .tx_empty = cpm_uart_tx_empty, + .set_mctrl = cpm_uart_set_mctrl, + .get_mctrl = cpm_uart_get_mctrl, + .stop_tx = cpm_uart_stop_tx, + .start_tx = cpm_uart_start_tx, + .stop_rx = cpm_uart_stop_rx, + .enable_ms = cpm_uart_enable_ms, + .break_ctl = cpm_uart_break_ctl, + .startup = cpm_uart_startup, + .shutdown = cpm_uart_shutdown, + .set_termios = cpm_uart_set_termios, + .type = cpm_uart_type, + .release_port = cpm_uart_release_port, + .request_port = cpm_uart_request_port, + .config_port = cpm_uart_config_port, + .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif +}; + +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +static int cpm_uart_init_port(struct device_node *np, + struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, *pram; + int len; + int ret; + int i; + + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; + } + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-command property.\n", np->name); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); + } else { + ret = -ENODEV; + goto out_mem; + } + + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops, + pinfo->port.iotype = UPIO_MEM; + pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = of_irq_to_resource(np, 0, NULL); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + + return cpm_uart_request_port(&pinfo->port); + +out_pram: + cpm_uart_unmap_pram(pinfo, pram); +out_mem: + iounmap(mem); + return ret; +} + +#ifdef CONFIG_SERIAL_CPM_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; + unsigned long flags; + int nolock = oops_in_progress; + + if (unlikely(nolock)) { + local_irq_save(flags); + } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + } + + cpm_uart_early_write(pinfo, s, count); + + if (unlikely(nolock)) { + local_irq_restore(flags); + } else { + spin_unlock_irqrestore(&pinfo->port.lock, flags); + } +} + + +static int __init cpm_uart_console_setup(struct console *co, char *options) +{ + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + + struct device_node *np = NULL; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + do { + np = of_find_node_by_type(np, "serial"); + if (!np) + return -ENODEV; + + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + i--; + } while (i++ != co->index); + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + if ((baud = uart_baudrate()) == -1) + baud = 9600; + } + + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 1); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + uart_set_options(port, co, baud, parity, bits, flow); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); + + return 0; +} + +static struct uart_driver cpm_reg; +static struct console cpm_scc_uart_console = { + .name = "ttyCPM", + .write = cpm_uart_console_write, + .device = uart_console_device, + .setup = cpm_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &cpm_reg, +}; + +static int __init cpm_uart_console_init(void) +{ + register_console(&cpm_scc_uart_console); + return 0; +} + +console_initcall(cpm_uart_console_init); + +#define CPM_UART_CONSOLE &cpm_scc_uart_console +#else +#define CPM_UART_CONSOLE NULL +#endif + +static struct uart_driver cpm_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyCPM", + .dev_name = "ttyCPM", + .major = SERIAL_CPM_MAJOR, + .minor = SERIAL_CPM_MINOR, + .cons = CPM_UART_CONSOLE, + .nr = UART_NR, +}; + +static int probe_index; + +static int __devinit cpm_uart_probe(struct platform_device *ofdev, + const struct of_device_id *match) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + dev_set_drvdata(&ofdev->dev, pinfo); + + /* initialize the device pointer for the port */ + pinfo->port.dev = &ofdev->dev; + + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int __devexit cpm_uart_remove(struct platform_device *ofdev) +{ + struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} +}; + +static struct of_platform_driver cpm_uart_driver = { + .driver = { + .name = "cpm_uart", + .owner = THIS_MODULE, + .of_match_table = cpm_uart_match, + }, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = of_register_platform_driver(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + of_unregister_platform_driver(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} + +module_init(cpm_uart_init); +module_exit(cpm_uart_exit); + +MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); +MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 0000000..3fc1d66 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,138 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + return of_iomap(np, 1); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + /* was hostalloc but changed cause it blows away the */ + /* large tlb mapping when pinning the kernel area */ + mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); + dma_addr = (u32)cpm_dpram_phys(mem_addr); + } else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; /* virtual address*/ + pinfo->dma_addr = dma_addr; /* physical address*/ + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h new file mode 100644 index 0000000..10eecd6 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm1 + * + */ + +#ifndef CPM_UART_CPM1_H +#define CPM_UART_CPM1_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); + out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) +{ + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c new file mode 100644 index 0000000..814ac00 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -0,0 +1,174 @@ +/* + * linux/drivers/serial/cpm_uart_cpm2.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + void __iomem *pram; + unsigned long offset; + struct resource res; + resource_size_t len; + + /* Don't remap parameter RAM if it has already been initialized + * during console setup. + */ + if (IS_SMC(port) && port->smcup) + return port->smcup; + else if (!IS_SMC(port) && port->sccup) + return port->sccup; + + if (of_address_to_resource(np, 1, &res)) + return NULL; + + len = resource_size(&res); + pram = ioremap(res.start, len); + if (!pram) + return NULL; + + if (!IS_SMC(port)) + return pram; + + if (len != 2) { + printk(KERN_WARNING "cpm_uart[%d]: device tree references " + "SMC pram, using boot loader/wrapper pram mapping. " + "Please fix your device tree to reference the pram " + "base register instead.\n", + port->port.line); + return pram; + } + + offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); + out_be16(pram, offset); + iounmap(pram); + return cpm_muram_addr(offset); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + if (!IS_SMC(port)) + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 __iomem *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = kzalloc(memsz, GFP_NOWAIT); + dma_addr = virt_to_bus(mem_addr); + } + else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h new file mode 100644 index 0000000..7194c63 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm2 + * + */ + +#ifndef CPM_UART_CPM2_H +#define CPM_UART_CPM2_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) +{ + out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c new file mode 100644 index 0000000..bcc31f2 --- /dev/null +++ b/drivers/tty/serial/crisv10.c @@ -0,0 +1,4573 @@ +/* + * Serial port driver for the ETRAX 100LX chip + * + * Copyright (C) 1998-2007 Axis Communications AB + * + * Many, many authors. Based once upon a time on serial.c for 16x50. + * + */ + +static char *serial_version = "$Revision: 1.25 $"; + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +/* non-arch dependent serial structures are in linux/serial.h */ +#include +/* while we keep our own stuff (struct e100_serial) in a local .h file */ +#include "crisv10.h" +#include +#include + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +#ifndef CONFIG_ETRAX_FAST_TIMER +#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" +#endif +#endif + +#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ + (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) +#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" +#endif + +#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) +#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" +#endif + +/* + * All of the compatibilty code so we can compile serial.c against + * older kernels is hidden in serial_compat.h + */ +#if defined(LOCAL_HEADERS) +#include "serial_compat.h" +#endif + +struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +//#define SERIAL_DEBUG_INTR +//#define SERIAL_DEBUG_OPEN +//#define SERIAL_DEBUG_FLOW +//#define SERIAL_DEBUG_DATA +//#define SERIAL_DEBUG_THROTTLE +//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ +//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ + +/* Enable this to use serial interrupts to handle when you + expect the first received event on the serial port to + be an error, break or similar. Used to be able to flash IRMA + from eLinux */ +#define SERIAL_HANDLE_EARLY_ERRORS + +/* Currently 16 descriptors x 128 bytes = 2048 bytes */ +#define SERIAL_DESCR_BUF_SIZE 256 + +#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ +#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE + +/* We don't want to load the system with massive fast timer interrupt + * on high baudrates so limit it to 250 us (4kHz) */ +#define MIN_FLUSH_TIME_USEC 250 + +/* Add an x here to log a lot of timer stuff */ +#define TIMERD(x) +/* Debug details of interrupt handling */ +#define DINTR1(x) /* irq on/off, errors */ +#define DINTR2(x) /* tx and rx */ +/* Debug flip buffer stuff */ +#define DFLIP(x) +/* Debug flow control and overview of data flow */ +#define DFLOW(x) +#define DBAUD(x) +#define DLOG_INT_TRIG(x) + +//#define DEBUG_LOG_INCLUDED +#ifndef DEBUG_LOG_INCLUDED +#define DEBUG_LOG(line, string, value) +#else +struct debug_log_info +{ + unsigned long time; + unsigned long timer_data; +// int line; + const char *string; + int value; +}; +#define DEBUG_LOG_SIZE 4096 + +struct debug_log_info debug_log[DEBUG_LOG_SIZE]; +int debug_log_pos = 0; + +#define DEBUG_LOG(_line, _string, _value) do { \ + if ((_line) == SERIAL_DEBUG_LINE) {\ + debug_log_func(_line, _string, _value); \ + }\ +}while(0) + +void debug_log_func(int line, const char *string, int value) +{ + if (debug_log_pos < DEBUG_LOG_SIZE) { + debug_log[debug_log_pos].time = jiffies; + debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; +// debug_log[debug_log_pos].line = line; + debug_log[debug_log_pos].string = string; + debug_log[debug_log_pos].value = value; + debug_log_pos++; + } + /*printk(string, value);*/ +} +#endif + +#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS +/* Default number of timer ticks before flushing rx fifo + * When using "little data, low latency applications: use 0 + * When using "much data applications (PPP)" use ~5 + */ +#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 +#endif + +unsigned long timer_data_to_ns(unsigned long timer_data); + +static void change_speed(struct e100_serial *info); +static void rs_throttle(struct tty_struct * tty); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); +static int rs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +#ifdef CONFIG_ETRAX_RS485 +static int e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count); +#endif +static int get_lsr_info(struct e100_serial *info, unsigned int *value); + + +#define DEF_BAUD 115200 /* 115.2 kbit/s */ +#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ +/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ +#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ + +/* offsets from R_SERIALx_CTRL */ + +#define REG_DATA 0 +#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ +#define REG_TR_DATA 0 +#define REG_STATUS 1 +#define REG_TR_CTRL 1 +#define REG_REC_CTRL 2 +#define REG_BAUD 3 +#define REG_XOFF 4 /* this is a 32 bit register */ + +/* The bitfields are the same for all serial ports */ +#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) +#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) +#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) +#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) +#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) + +#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) + +/* Values for info->errorcode */ +#define ERRCODE_SET_BREAK (TTY_BREAK) +#define ERRCODE_INSERT 0x100 +#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) + +#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; + +/* + * General note regarding the use of IO_* macros in this file: + * + * We will use the bits defined for DMA channel 6 when using various + * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are + * the same for all channels (which of course they are). + * + * We will also use the bits defined for serial port 0 when writing commands + * to the different ports, as these bits too are the same for all ports. + */ + + +/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ +static const unsigned long e100_ser_int_mask = 0 +#ifdef CONFIG_ETRAX_SERIAL_PORT0 +| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1 +| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2 +| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3 +| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) +#endif +; +unsigned long r_alt_ser_baudrate_shadow = 0; + +/* this is the data for the four serial ports in the etrax100 */ +/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ +/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ + +static struct e100_serial rs_table[] = { + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL0_CTRL, + .irq = 1U << 12, /* uses DMA 6 and 7 */ + .oclrintradr = R_DMA_CH6_CLR_INTR, + .ofirstadr = R_DMA_CH6_FIRST, + .ocmdadr = R_DMA_CH6_CMD, + .ostatusadr = R_DMA_CH6_STATUS, + .iclrintradr = R_DMA_CH7_CLR_INTR, + .ifirstadr = R_DMA_CH7_FIRST, + .icmdadr = R_DMA_CH7_CMD, + .idescradr = R_DMA_CH7_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 2, + .dma_owner = dma_ser0, + .io_if = if_serial_0, +#ifdef CONFIG_ETRAX_SERIAL_PORT0 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER0_TX_DMA_NBR, + .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 0 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER0_RX_DMA_NBR, + .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 0 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + +}, /* ttyS0 */ +#ifndef CONFIG_SVINTO_SIM + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL1_CTRL, + .irq = 1U << 16, /* uses DMA 8 and 9 */ + .oclrintradr = R_DMA_CH8_CLR_INTR, + .ofirstadr = R_DMA_CH8_FIRST, + .ocmdadr = R_DMA_CH8_CMD, + .ostatusadr = R_DMA_CH8_STATUS, + .iclrintradr = R_DMA_CH9_CLR_INTR, + .ifirstadr = R_DMA_CH9_FIRST, + .icmdadr = R_DMA_CH9_CMD, + .idescradr = R_DMA_CH9_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 3, + .dma_owner = dma_ser1, + .io_if = if_serial_1, +#ifdef CONFIG_ETRAX_SERIAL_PORT1 + .enabled = 1, + .io_if_description = "ser1", +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER1_TX_DMA_NBR, + .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 1 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER1_RX_DMA_NBR, + .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 1 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_in_irq_nbr = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif +}, /* ttyS1 */ + + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL2_CTRL, + .irq = 1U << 4, /* uses DMA 2 and 3 */ + .oclrintradr = R_DMA_CH2_CLR_INTR, + .ofirstadr = R_DMA_CH2_FIRST, + .ocmdadr = R_DMA_CH2_CMD, + .ostatusadr = R_DMA_CH2_STATUS, + .iclrintradr = R_DMA_CH3_CLR_INTR, + .ifirstadr = R_DMA_CH3_FIRST, + .icmdadr = R_DMA_CH3_CMD, + .idescradr = R_DMA_CH3_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 0, + .dma_owner = dma_ser2, + .io_if = if_serial_2, +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + .enabled = 1, + .io_if_description = "ser2", +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER2_TX_DMA_NBR, + .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 2 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER2_RX_DMA_NBR, + .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 2 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + }, /* ttyS2 */ + + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL3_CTRL, + .irq = 1U << 8, /* uses DMA 4 and 5 */ + .oclrintradr = R_DMA_CH4_CLR_INTR, + .ofirstadr = R_DMA_CH4_FIRST, + .ocmdadr = R_DMA_CH4_CMD, + .ostatusadr = R_DMA_CH4_STATUS, + .iclrintradr = R_DMA_CH5_CLR_INTR, + .ifirstadr = R_DMA_CH5_FIRST, + .icmdadr = R_DMA_CH5_CMD, + .idescradr = R_DMA_CH5_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 1, + .dma_owner = dma_ser3, + .io_if = if_serial_3, +#ifdef CONFIG_ETRAX_SERIAL_PORT3 + .enabled = 1, + .io_if_description = "ser3", +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER3_TX_DMA_NBR, + .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 3 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER3_RX_DMA_NBR, + .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 3 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + } /* ttyS3 */ +#endif +}; + + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static struct fast_timer fast_timers[NR_PORTS]; +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY +#define PROCSTAT(x) x +struct ser_statistics_type { + int overrun_cnt; + int early_errors_cnt; + int ser_ints_ok_cnt; + int errors_cnt; + unsigned long int processing_flip; + unsigned long processing_flip_still_room; + unsigned long int timeout_flush_cnt; + int rx_dma_ints; + int tx_dma_ints; + int rx_tot; + int tx_tot; +}; + +static struct ser_statistics_type ser_stat[NR_PORTS]; + +#else + +#define PROCSTAT(x) + +#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ + +/* RS-485 */ +#if defined(CONFIG_ETRAX_RS485) +#ifdef CONFIG_ETRAX_FAST_TIMER +static struct fast_timer fast_timers_rs485[NR_PORTS]; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PA) +static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) +static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; +#endif +#endif + +/* Info and macros needed for each ports extra control/status signals. */ +#define E100_STRUCT_PORT(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (R_PORT_PA_DATA): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (R_PORT_PB_DATA):&dummy_ser[line])) + +#define E100_STRUCT_SHADOW(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (&port_pa_data_shadow): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (&port_pb_data_shadow):&dummy_ser[line])) +#define E100_STRUCT_MASK(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (1<= 0)? \ + (1< 3.3V to RS-232 driver -> -12V on RS-232 level + * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level + * + * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip + */ + +/* Output */ +#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) +/* Input */ +#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) + +/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ +/* Is an output */ +#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) + +/* Normally inputs */ +#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) +#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) + +/* Input */ +#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) + + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the memcpy_fromfs blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +static DEFINE_MUTEX(tmp_buf_mutex); + +/* Calculate the chartime depending on baudrate, numbor of bits etc. */ +static void update_char_time(struct e100_serial * info) +{ + tcflag_t cflags = info->port.tty->termios->c_cflag; + int bits; + + /* calc. number of bits / data byte */ + /* databits + startbit and 1 stopbit */ + if ((cflags & CSIZE) == CS7) + bits = 9; + else + bits = 10; + + if (cflags & CSTOPB) /* 2 stopbits ? */ + bits++; + + if (cflags & PARENB) /* parity bit ? */ + bits++; + + /* calc timeout */ + info->char_time_usec = ((bits * 1000000) / info->baud) + 1; + info->flush_time_usec = 4*info->char_time_usec; + if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) + info->flush_time_usec = MIN_FLUSH_TIME_USEC; + +} + +/* + * This function maps from the Bxxxx defines in asm/termbits.h into real + * baud rates. + */ + +static int +cflag_to_baud(unsigned int cflag) +{ + static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }; + + static int ext_baud_table[] = { + 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, + 0, 0, 0, 0, 0, 0, 0, 0 }; + + if (cflag & CBAUDEX) + return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + return baud_table[cflag & CBAUD]; +} + +/* and this maps to an etrax100 hardware baud constant */ + +static unsigned char +cflag_to_etrax_baud(unsigned int cflag) +{ + char retval; + + static char baud_table[] = { + -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; + + static char ext_baud_table[] = { + -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; + + if (cflag & CBAUDEX) + retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + retval = baud_table[cflag & CBAUD]; + + if (retval < 0) { + printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); + retval = 5; /* choose default 9600 instead */ + } + + return retval | (retval << 4); /* choose same for both TX and RX */ +} + + +/* Various static support functions */ + +/* Functions to set or clear DTR/RTS on the requested line */ +/* It is complicated by the fact that RTS is a serial port register, while + * DTR might not be implemented in the HW at all, and if it is, it can be on + * any general port. + */ + + +static inline void +e100_dtr(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned char mask = e100_modem_pins[info->line].dtr_mask; + +#ifdef SERIAL_DEBUG_IO + printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); + printk("ser%i shadow before 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif + /* DTR is active low */ + { + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].dtr_shadow &= ~mask; + *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; + local_irq_restore(flags); + } + +#ifdef SERIAL_DEBUG_IO + printk("ser%i shadow after 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif +#endif +} + +/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive + * 0=0V , 1=3.3V + */ +static inline void +e100_rts(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned long flags; + local_irq_save(flags); + info->rx_ctrl &= ~E100_RTS_MASK; + info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ + info->ioport[REG_REC_CTRL] = info->rx_ctrl; + local_irq_restore(flags); +#ifdef SERIAL_DEBUG_IO + printk("ser%i rts %i\n", info->line, set); +#endif +#endif +} + + +/* If this behaves as a modem, RI and CD is an output */ +static inline void +e100_ri_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* RI is active low */ + { + unsigned char mask = e100_modem_pins[info->line].ri_mask; + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].ri_shadow &= ~mask; + *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; + local_irq_restore(flags); + } +#endif +} +static inline void +e100_cd_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* CD is active low */ + { + unsigned char mask = e100_modem_pins[info->line].cd_mask; + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].cd_shadow &= ~mask; + *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; + local_irq_restore(flags); + } +#endif +} + +static inline void +e100_disable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* disable the receiver */ + info->ioport[REG_REC_CTRL] = + (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +static inline void +e100_enable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* enable the receiver */ + info->ioport[REG_REC_CTRL] = + (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ + +static inline void +e100_disable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); +} + +static inline void +e100_enable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); +} + +/* the tx DMA uses only dma_descr interrupt */ + +static void e100_disable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = info->irq; +} + +static void e100_enable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = info->irq; +} + +static void e100_disable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable output DMA channel for the serial port in question + * ( set to something other than serialX) + */ + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == + IO_STATE(R_GEN_CONFIG, dma6, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == + IO_STATE(R_GEN_CONFIG, dma8, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == + IO_STATE(R_GEN_CONFIG, dma2, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == + IO_STATE(R_GEN_CONFIG, dma4, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + + +static void e100_enable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); + /* Enable output DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + +static void e100_disable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable input DMA channel for the serial port in question + * ( set to something other than serialX) + */ + local_irq_save(flags); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == + IO_STATE(R_GEN_CONFIG, dma7, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == + IO_STATE(R_GEN_CONFIG, dma9, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == + IO_STATE(R_GEN_CONFIG, dma3, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == + IO_STATE(R_GEN_CONFIG, dma5, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + + +static void e100_enable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + local_irq_save(flags); + /* Enable input DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + +#ifdef SERIAL_HANDLE_EARLY_ERRORS +/* in order to detect and fix errors on the first byte + we have to use the serial interrupts as well. */ + +static inline void +e100_disable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); +} + +static inline void +e100_enable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+2*info->line), + (1U << (8+2*info->line))); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); +} +#endif + +static inline void +e100_disable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); +} + +static inline void +e100_enable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+1+2*info->line), + (1U << (8+1+2*info->line))); +#endif + DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); +} + +static inline void e100_enable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_enable_rxdma_irq(info); + else + e100_enable_serial_data_irq(info); +} +static inline void e100_disable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_disable_rxdma_irq(info); + else + e100_disable_serial_data_irq(info); +} + +#if defined(CONFIG_ETRAX_RS485) +/* Enable RS-485 mode on selected port. This is UGLY. */ +static int +e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 1); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); +#endif + + info->rs485 = *r; + + /* Maximum delay before RTS equal to 1000 */ + if (info->rs485.delay_rts_before_send >= 1000) + info->rs485.delay_rts_before_send = 1000; + +/* printk("rts: on send = %i, after = %i, enabled = %i", + info->rs485.rts_on_send, + info->rs485.rts_after_sent, + info->rs485.enabled + ); +*/ + return 0; +} + +static int +e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + int old_value = (info->rs485.flags) & SER_RS485_ENABLED; + + /* rs485 is always implicitly enabled if we're using the ioctl() + * but it doesn't have to be set in the serial_rs485 + * (to be backward compatible with old apps) + * So we store, set and restore it. + */ + info->rs485.flags |= SER_RS485_ENABLED; + /* rs_write now deals with RS485 if enabled */ + count = rs_write(tty, buf, count); + if (!old_value) + info->rs485.flags &= ~(SER_RS485_ENABLED); + return count; +} + +#ifdef CONFIG_ETRAX_FAST_TIMER +/* Timer function to toggle RTS when using FAST_TIMER */ +static void rs485_toggle_rts_timer_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers_rs485[info->line].function = NULL; + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rx_irq(info); +#endif +} +#endif +#endif /* CONFIG_ETRAX_RS485 */ + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter using the XOFF registers, as necessary. + * ------------------------------------------------------------ + */ + +static void +rs_stop(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, + STOP_CHAR(info->port.tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + local_irq_restore(flags); + } +} + +static void +rs_start(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + if (!info->uses_dma_out && + info->xmit.head != info->xmit.tail && info->xmit.buf) + e100_enable_serial_tx_ready_irq(info); + + local_irq_restore(flags); + } +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static void rs_sched_event(struct e100_serial *info, int event) +{ + if (info->event & (1 << event)) + return; + info->event |= 1 << event; + schedule_work(&info->work); +} + +/* The output DMA channel is free - use it to send as many chars as possible + * NOTES: + * We don't pay attention to info->x_char, which means if the TTY wants to + * use XON/XOFF it will set info->x_char but we won't send any X char! + * + * To implement this, we'd just start a DMA send of 1 byte pointing at a + * buffer containing the X char, and skip updating xmit. We'd also have to + * check if the last sent char was the X char when we enter this function + * the next time, to avoid updating xmit with the sent X value. + */ + +static void +transmit_chars_dma(struct e100_serial *info) +{ + unsigned int c, sentl; + struct etrax_dma_descr *descr; + +#ifdef CONFIG_SVINTO_SIM + /* This will output too little if tail is not 0 always since + * we don't reloop to send the other part. Anyway this SHOULD be a + * no-op - transmit_chars_dma would never really be called during sim + * since rs_write does not write into the xmit buffer then. + */ + if (info->xmit.tail) + printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); + if (info->xmit.head != info->xmit.tail) { + SIMCOUT(info->xmit.buf + info->xmit.tail, + CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE)); + info->xmit.head = info->xmit.tail; /* move back head */ + info->tr_running = 0; + } + return; +#endif + /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + +#ifdef SERIAL_DEBUG_INTR + if (info->line == SERIAL_DEBUG_LINE) + printk("tc\n"); +#endif + if (!info->tr_running) { + /* weirdo... we shouldn't get here! */ + printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); + return; + } + + descr = &info->tr_descr; + + /* first get the amount of bytes sent during the last DMA transfer, + and update xmit accordingly */ + + /* if the stop bit was not set, all data has been sent */ + if (!(descr->status & d_stop)) { + sentl = descr->sw_len; + } else + /* otherwise we find the amount of data sent here */ + sentl = descr->hw_len; + + DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); + + /* update stats */ + info->icount.tx += sentl; + + /* update xmit buffer */ + info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); + + /* if there is only a few chars left in the buf, wake up the blocked + write if any */ + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + + /* find out the largest amount of consecutive bytes we want to send now */ + + c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + + /* Don't send all in one DMA transfer - divide it so we wake up + * application before all is sent + */ + + if (c >= 4*WAKEUP_CHARS) + c = c/2; + + if (c <= 0) { + /* our job here is done, don't schedule any new DMA transfer */ + info->tr_running = 0; + +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.flags & SER_RS485_ENABLED) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + return; + } + + /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ + /* set up the descriptor correctly for output */ + DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); + descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ + descr->sw_len = c; + descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); + descr->status = 0; + + *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* DMA is now running (hopefully) */ +} /* transmit_chars_dma */ + +static void +start_transmit(struct e100_serial *info) +{ +#if 0 + if (info->line == SERIAL_DEBUG_LINE) + printk("x\n"); +#endif + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + info->tr_running = 1; + if (info->uses_dma_out) + transmit_chars_dma(info); + else + e100_enable_serial_tx_ready_irq(info); +} /* start_transmit */ + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static int serial_fast_timer_started = 0; +static int serial_fast_timer_expired = 0; +static void flush_timeout_function(unsigned long data); +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ + unsigned long timer_flags; \ + local_irq_save(timer_flags); \ + if (fast_timers[info->line].function == NULL) { \ + serial_fast_timer_started++; \ + TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ + TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ + start_one_shot_timer(&fast_timers[info->line], \ + flush_timeout_function, \ + (unsigned long)info, \ + (usec), \ + string); \ + } \ + else { \ + TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ + } \ + local_irq_restore(timer_flags); \ +} +#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) + +#else +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) +#define START_FLUSH_FAST_TIMER(info, string) +#endif + +static struct etrax_recv_buffer * +alloc_recv_buffer(unsigned int size) +{ + struct etrax_recv_buffer *buffer; + + if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) + return NULL; + + buffer->next = NULL; + buffer->length = 0; + buffer->error = TTY_NORMAL; + + return buffer; +} + +static void +append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) +{ + unsigned long flags; + + local_irq_save(flags); + + if (!info->first_recv_buffer) + info->first_recv_buffer = buffer; + else + info->last_recv_buffer->next = buffer; + + info->last_recv_buffer = buffer; + + info->recv_cnt += buffer->length; + if (info->recv_cnt > info->max_recv_cnt) + info->max_recv_cnt = info->recv_cnt; + + local_irq_restore(flags); +} + +static int +add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) +{ + struct etrax_recv_buffer *buffer; + if (info->uses_dma_in) { + if (!(buffer = alloc_recv_buffer(4))) + return 0; + + buffer->length = 1; + buffer->error = flag; + buffer->buffer[0] = data; + + append_recv_buffer(info, buffer); + + info->icount.rx++; + } else { + struct tty_struct *tty = info->port.tty; + tty_insert_flip_char(tty, data, flag); + info->icount.rx++; + } + + return 1; +} + +static unsigned int handle_descr_data(struct e100_serial *info, + struct etrax_dma_descr *descr, + unsigned int recvl) +{ + struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; + + if (info->recv_cnt + recvl > 65536) { + printk(KERN_CRIT + "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); + return 0; + } + + buffer->length = recvl; + + if (info->errorcode == ERRCODE_SET_BREAK) + buffer->error = TTY_BREAK; + info->errorcode = 0; + + append_recv_buffer(info, buffer); + + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); + + descr->buf = virt_to_phys(buffer->buffer); + + return recvl; +} + +static unsigned int handle_all_descr_data(struct e100_serial *info) +{ + struct etrax_dma_descr *descr; + unsigned int recvl; + unsigned int ret = 0; + + while (1) + { + descr = &info->rec_descr[info->cur_rec_descr]; + + if (descr == phys_to_virt(*info->idescradr)) + break; + + if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) + info->cur_rec_descr = 0; + + /* find out how many bytes were read */ + + /* if the eop bit was not set, all data has been received */ + if (!(descr->status & d_eop)) { + recvl = descr->sw_len; + } else { + /* otherwise we find the amount of data received here */ + recvl = descr->hw_len; + } + + /* Reset the status information */ + descr->status = 0; + + DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); + if (info->port.tty->stopped) { + unsigned char *buf = phys_to_virt(descr->buf); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); + } + ); + + /* update stats */ + info->icount.rx += recvl; + + ret += handle_descr_data(info, descr, recvl); + } + + return ret; +} + +static void receive_chars_dma(struct e100_serial *info) +{ + struct tty_struct *tty; + unsigned char rstat; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + + /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + + tty = info->port.tty; + if (!tty) /* Something wrong... */ + return; + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + if (info->uses_dma_in) + e100_enable_serial_data_irq(info); +#endif + + if (info->errorcode == ERRCODE_INSERT_BREAK) + add_char_and_flag(info, '\0', TTY_BREAK); + + handle_all_descr_data(info); + + /* Read the status register to detect errors */ + rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); + } + + if (rstat & SER_ERROR_MASK) { + /* If we got an error, we must reset it by reading the + * data_in field + */ + unsigned char data = info->ioport[REG_DATA]; + + PROCSTAT(ser_stat[info->line].errors_cnt++); + DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + + if (rstat & SER_PAR_ERR_MASK) + add_char_and_flag(info, data, TTY_PARITY); + else if (rstat & SER_OVERRUN_MASK) + add_char_and_flag(info, data, TTY_OVERRUN); + else if (rstat & SER_FRAMING_ERR_MASK) + add_char_and_flag(info, data, TTY_FRAME); + } + + START_FLUSH_FAST_TIMER(info, "receive_chars"); + + /* Restart the receiving DMA */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); +} + +static int start_recv_dma(struct e100_serial *info) +{ + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + + /* Set up the receiving descriptors */ + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); + + descr[i].ctrl = d_int; + descr[i].buf = virt_to_phys(buffer->buffer); + descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; + descr[i].hw_len = 0; + descr[i].status = 0; + descr[i].next = virt_to_phys(&descr[i+1]); + } + + /* Link the last descriptor to the first */ + descr[i-1].next = virt_to_phys(&descr[0]); + + /* Start with the first descriptor in the list */ + info->cur_rec_descr = 0; + + /* Start the DMA */ + *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* Input DMA should be running now */ + return 1; +} + +static void +start_receive(struct e100_serial *info) +{ +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + if (info->uses_dma_in) { + /* reset the input dma channel to be sure it works */ + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + start_recv_dma(info); + } +} + + +/* the bits in the MASK2 register are laid out like this: + DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR + where I is the input channel and O is the output channel for the port. + info->irq is the bit number for the DMAO_DESCR so to check the others we + shift info->irq to the left. +*/ + +/* dma output channel interrupt handler + this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or + DMA8(ser1) when they have finished a descriptor with the intr flag set. +*/ + +static irqreturn_t +tr_interrupt(int irq, void *dev_id) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? tr_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_out) + continue; + /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ + if (ireg & info->irq) { + handled = 1; + /* we can send a new dma bunch. make it so. */ + DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); + /* Read jiffies_usec first, + * we want this time to be as late as possible + */ + PROCSTAT(ser_stat[info->line].tx_dma_ints++); + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + transmit_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +/* dma input channel interrupt handler */ + +static irqreturn_t +rec_interrupt(int irq, void *dev_id) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? rec_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_in) + continue; + /* check for both dma_eop and dma_descr for the input dma channel */ + if (ireg & ((info->irq << 2) | (info->irq << 3))) { + handled = 1; + /* we have received something */ + receive_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* rec_interrupt */ + +static int force_eop_if_needed(struct e100_serial *info) +{ + /* We check data_avail bit to determine if data has + * arrived since last time + */ + unsigned char rstat = info->ioport[REG_STATUS]; + + /* error or datavail? */ + if (rstat & SER_ERROR_MASK) { + /* Some error has occurred. If there has been valid data, an + * EOP interrupt will be made automatically. If no data, the + * normal ser_interrupt should be enabled and handle it. + * So do nothing! + */ + DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", + rstat | (info->line << 8)); + return 0; + } + + if (rstat & SER_DATA_AVAIL_MASK) { + /* Ok data, no error, count it */ + TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", + rstat | (info->line << 8))); + /* Read data to clear status flags */ + (void)info->ioport[REG_DATA]; + + info->forced_eop = 0; + START_FLUSH_FAST_TIMER(info, "magic"); + return 0; + } + + /* hit the timeout, force an EOP for the input + * dma channel if we haven't already + */ + if (!info->forced_eop) { + info->forced_eop = 1; + PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); + TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); + FORCE_EOP(info); + } + + return 1; +} + +static void flush_to_flip_buffer(struct e100_serial *info) +{ + struct tty_struct *tty; + struct etrax_recv_buffer *buffer; + unsigned long flags; + + local_irq_save(flags); + tty = info->port.tty; + + if (!tty) { + local_irq_restore(flags); + return; + } + + while ((buffer = info->first_recv_buffer) != NULL) { + unsigned int count = buffer->length; + + tty_insert_flip_string(tty, buffer->buffer, count); + info->recv_cnt -= count; + + if (count == buffer->length) { + info->first_recv_buffer = buffer->next; + kfree(buffer); + } else { + buffer->length -= count; + memmove(buffer->buffer, buffer->buffer + count, buffer->length); + buffer->error = TTY_NORMAL; + } + } + + if (!info->first_recv_buffer) + info->last_recv_buffer = NULL; + + local_irq_restore(flags); + + /* This includes a check for low-latency */ + tty_flip_buffer_push(tty); +} + +static void check_flush_timeout(struct e100_serial *info) +{ + /* Flip what we've got (if we can) */ + flush_to_flip_buffer(info); + + /* We might need to flip later, but not to fast + * since the system is busy processing input... */ + if (info->first_recv_buffer) + START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); + + /* Force eop last, since data might have come while we're processing + * and if we started the slow timer above, we won't start a fast + * below. + */ + force_eop_if_needed(info); +} + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static void flush_timeout_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers[info->line].function = NULL; + serial_fast_timer_expired++; + TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); + TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); + check_flush_timeout(info); +} + +#else + +/* dma fifo/buffer timeout handler + forces an end-of-packet for the dma input channel if no chars + have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. +*/ + +static struct timer_list flush_timer; + +static void +timed_flush_handler(unsigned long ptr) +{ + struct e100_serial *info; + int i; + +#ifdef CONFIG_SVINTO_SIM + return; +#endif + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (info->uses_dma_in) + check_flush_timeout(info); + } + + /* restart flush timer */ + mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); +} +#endif + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + +/* If there is an error (ie break) when the DMA is running and + * there are no bytes in the fifo the DMA is stopped and we get no + * eop interrupt. Thus we have to monitor the first bytes on a DMA + * transfer, and if it is without error we can turn the serial + * interrupts off. + */ + +/* +BREAK handling on ETRAX 100: +ETRAX will generate interrupt although there is no stop bit between the +characters. + +Depending on how long the break sequence is, the end of the breaksequence +will look differently: +| indicates start/end of a character. + +B= Break character (0x00) with framing error. +E= Error byte with parity error received after B characters. +F= "Faked" valid byte received immediately after B characters. +V= Valid byte + +1. + B BL ___________________________ V +.._|__________|__________| |valid data | + +Multiple frame errors with data == 0x00 (B), +the timing matches up "perfectly" so no extra ending char is detected. +The RXD pin is 1 in the last interrupt, in that case +we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really +know if another byte will come and this really is case 2. below +(e.g F=0xFF or 0xFE) +If RXD pin is 0 we can expect another character (see 2. below). + + +2. + + B B E or F__________________..__ V +.._|__________|__________|______ | |valid data + "valid" or + parity error + +Multiple frame errors with data == 0x00 (B), +but the part of the break trigs is interpreted as a start bit (and possibly +some 0 bits followed by a number of 1 bits and a stop bit). +Depending on parity settings etc. this last character can be either +a fake "valid" char (F) or have a parity error (E). + +If the character is valid it will be put in the buffer, +we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt +will set the flags so the tty will handle it, +if it's an error byte it will not be put in the buffer +and we set info->errorcode = ERRCODE_INSERT_BREAK. + +To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp +of the last faulty char (B) and compares it with the current time: +If the time elapsed time is less then 2*char_time_usec we will assume +it's a faked F char and not a Valid char and set +info->errorcode = ERRCODE_SET_BREAK. + +Flaws in the above solution: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +We use the timer to distinguish a F character from a V character, +if a V character is to close after the break we might make the wrong decision. + +TODO: The break will be delayed until an F or V character is received. + +*/ + +static +struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) +{ + unsigned long data_read; + struct tty_struct *tty = info->port.tty; + + if (!tty) { + printk("!NO TTY!\n"); + return info; + } + + /* Read data and status at the same time */ + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); +more_data: + if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); + + if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | + IO_MASK(R_SERIAL0_READ, par_err) | + IO_MASK(R_SERIAL0_READ, overrun) )) { + /* An error */ + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + log_int_trig1_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + + + if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && + (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + unsigned char data = IO_EXTRACT(R_SERIAL0_READ, + data_in, data_read); + char flag = TTY_NORMAL; + if (info->errorcode == ERRCODE_INSERT_BREAK) { + struct tty_struct *tty = info->port.tty; + tty_insert_flip_char(tty, 0, flag); + info->icount.rx++; + } + + if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { + info->icount.parity++; + flag = TTY_PARITY; + } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { + info->icount.overrun++; + flag = TTY_OVERRUN; + } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { + info->icount.frame++; + flag = TTY_FRAME; + } + tty_insert_flip_char(tty, data, flag); + info->errorcode = 0; + } + info->break_detected_cnt = 0; + } + } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + /* No error */ + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + if (log_int_pos >= log_int_size) { + log_int_pos = 0; + } + log_int_trig0_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + tty_insert_flip_char(tty, + IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), + TTY_NORMAL); + } else { + DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); + } + + + info->icount.rx++; + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); + if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); + goto more_data; + } + + tty_flip_buffer_push(info->port.tty); + return info; +} + +static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) +{ + unsigned char rstat; + +#ifdef SERIAL_DEBUG_INTR + printk("Interrupt from serport %d\n", i); +#endif +/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ + if (!info->uses_dma_in) { + return handle_ser_rx_interrupt_no_dma(info); + } + /* DMA is used */ + rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + + if (rstat & SER_ERROR_MASK) { + unsigned char data; + + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + /* If we got an error, we must reset it by reading the + * data_in field + */ + data = info->ioport[REG_DATA]; + DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); + if (!data && (rstat & SER_FRAMING_ERR_MASK)) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (rstat & SER_RXD_MASK) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + if (info->errorcode == ERRCODE_INSERT_BREAK) { + info->icount.brk++; + add_char_and_flag(info, '\0', TTY_BREAK); + } + + if (rstat & SER_PAR_ERR_MASK) { + info->icount.parity++; + add_char_and_flag(info, data, TTY_PARITY); + } else if (rstat & SER_OVERRUN_MASK) { + info->icount.overrun++; + add_char_and_flag(info, data, TTY_OVERRUN); + } else if (rstat & SER_FRAMING_ERR_MASK) { + info->icount.frame++; + add_char_and_flag(info, data, TTY_FRAME); + } + + info->errorcode = 0; + } + info->break_detected_cnt = 0; + DEBUG_LOG(info->line, "#iERR s d %04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + } + PROCSTAT(ser_stat[info->line].early_errors_cnt++); + } else { /* It was a valid byte, now let the DMA do the rest */ + unsigned long curr_time_u = GET_JIFFIES_USEC(); + unsigned long curr_time = jiffies; + + if (info->break_detected_cnt) { + /* Detect if this character is a new valid char or the + * last char in a break sequence: If LSBits are 0 and + * MSBits are high AND the time is close to the + * previous interrupt we should discard it. + */ + long elapsed_usec = + (curr_time - info->last_rx_active) * (1000000/HZ) + + curr_time_u - info->last_rx_active_usec; + if (elapsed_usec < 2*info->char_time_usec) { + DEBUG_LOG(info->line, "FBRK %i\n", info->line); + /* Report as BREAK (error) and let + * receive_chars_dma() handle it + */ + info->errorcode = ERRCODE_SET_BREAK; + } else { + DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); + } + DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); + } + +#ifdef SERIAL_DEBUG_INTR + printk("** OK, disabling ser_interrupts\n"); +#endif + e100_disable_serial_data_irq(info); + DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); + info->break_detected_cnt = 0; + + PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); + } + /* Restarting the DMA never hurts */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); + START_FLUSH_FAST_TIMER(info, "ser_int"); + return info; +} /* handle_ser_rx_interrupt */ + +static void handle_ser_tx_interrupt(struct e100_serial *info) +{ + unsigned long flags; + + if (info->x_char) { + unsigned char rstat; + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); + local_irq_save(flags); + rstat = info->ioport[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + + info->ioport[REG_TR_DATA] = info->x_char; + info->icount.tx++; + info->x_char = 0; + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + local_irq_restore(flags); + return; + } + if (info->uses_dma_out) { + unsigned char rstat; + int i; + /* We only use normal tx interrupt when sending x_char */ + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); + local_irq_save(flags); + rstat = info->ioport[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + e100_disable_serial_tx_ready_irq(info); + if (info->port.tty->stopped) + rs_stop(info->port.tty); + /* Enable the DMA channel and tell it to continue */ + e100_enable_txdma_channel(info); + /* Wait 12 cycles before doing the DMA command */ + for(i = 6; i > 0; i--) + nop(); + + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); + local_irq_restore(flags); + return; + } + /* Normal char-by-char interrupt */ + if (info->xmit.head == info->xmit.tail + || info->port.tty->stopped + || info->port.tty->hw_stopped) { + DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", + info->port.tty->stopped)); + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + return; + } + DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); + /* Send a byte, rs485 timing is critical so turn of ints */ + local_irq_save(flags); + info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); + info->icount.tx++; + if (info->xmit.head == info->xmit.tail) { +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.flags & SER_RS485_ENABLED) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); + } else { + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + } + local_irq_restore(flags); + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + +} /* handle_ser_tx_interrupt */ + +/* result of time measurements: + * RX duration 54-60 us when doing something, otherwise 6-9 us + * ser_int duration: just sending: 8-15 us normally, up to 73 us + */ +static irqreturn_t +ser_interrupt(int irq, void *dev_id) +{ + static volatile int tx_started = 0; + struct e100_serial *info; + int i; + unsigned long flags; + unsigned long irq_mask1_rd; + unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ + int handled = 0; + static volatile unsigned long reentered_ready_mask = 0; + + local_irq_save(flags); + irq_mask1_rd = *R_IRQ_MASK1_RD; + /* First handle all rx interrupts with ints disabled */ + info = rs_table; + irq_mask1_rd &= e100_ser_int_mask; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the data irq? */ + if (irq_mask1_rd & data_mask) { + handled = 1; + handle_ser_rx_interrupt(info); + } + info += 1; + data_mask <<= 2; + } + /* Handle tx interrupts with interrupts enabled so we + * can take care of new data interrupts while transmitting + * We protect the tx part with the tx_started flag. + * We disable the tr_ready interrupts we are about to handle and + * unblock the serial interrupt so new serial interrupts may come. + * + * If we get a new interrupt: + * - it migth be due to synchronous serial ports. + * - serial irq will be blocked by general irq handler. + * - async data will be handled above (sync will be ignored). + * - tx_started flag will prevent us from trying to send again and + * we will exit fast - no need to unblock serial irq. + * - Next (sync) serial interrupt handler will be runned with + * disabled interrupt due to restore_flags() at end of function, + * so sync handler will not be preempted or reentered. + */ + if (!tx_started) { + unsigned long ready_mask; + unsigned long + tx_started = 1; + /* Only the tr_ready interrupts left */ + irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + while (irq_mask1_rd) { + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = irq_mask1_rd; + /* Unblock the serial interrupt */ + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); + + local_irq_enable(); + ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ + info = rs_table; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the ready irq? */ + if (irq_mask1_rd & ready_mask) { + handled = 1; + handle_ser_tx_interrupt(info); + } + info += 1; + ready_mask <<= 2; + } + /* handle_ser_tx_interrupt enables tr_ready interrupts */ + local_irq_disable(); + /* Handle reentered TX interrupt */ + irq_mask1_rd = reentered_ready_mask; + } + local_irq_disable(); + tx_started = 0; + } else { + unsigned long ready_mask; + ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + if (ready_mask) { + reentered_ready_mask |= ready_mask; + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = ready_mask; + DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); + } + } + + local_irq_restore(flags); + return IRQ_RETVAL(handled); +} /* ser_interrupt */ +#endif + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using rs_sched_event(), and they get done here. + */ +static void +do_softint(struct work_struct *work) +{ + struct e100_serial *info; + struct tty_struct *tty; + + info = container_of(work, struct e100_serial, work); + + tty = info->port.tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + +static int +startup(struct e100_serial * info) +{ + unsigned long flags; + unsigned long xmit_page; + int i; + + xmit_page = get_zeroed_page(GFP_KERNEL); + if (!xmit_page) + return -ENOMEM; + + local_irq_save(flags); + + /* if it was already initialized, skip this */ + + if (info->flags & ASYNC_INITIALIZED) { + local_irq_restore(flags); + free_page(xmit_page); + return 0; + } + + if (info->xmit.buf) + free_page(xmit_page); + else + info->xmit.buf = (unsigned char *) xmit_page; + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Bits and pieces collected from below. Better to have them + in one ifdef:ed clause than to mix in a lot of ifdefs, + right? */ + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = NULL; + + /* No real action in the simulator, but may set info important + to ioctl. */ + change_speed(info); +#else + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + /* + * Reset the DMA channels and make sure their interrupts are cleared + */ + + if (info->dma_in_enabled) { + info->uses_dma_in = 1; + e100_enable_rxdma_channel(info); + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + /* Wait until reset cycle is complete */ + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_rxdma_channel(info); + } + + if (info->dma_out_enabled) { + info->uses_dma_out = 1; + e100_enable_txdma_channel(info); + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_txdma_channel(info); + } + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = 0; + + /* + * and set the speed and other flags of the serial port + * this will start the rx/tx as well + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_enable_serial_data_irq(info); +#endif + change_speed(info); + + /* dummy read to reset any serial errors */ + + (void)info->ioport[REG_DATA]; + + /* enable the interrupts */ + if (info->uses_dma_out) + e100_enable_txdma_irq(info); + + e100_enable_rx_irq(info); + + info->tr_running = 0; /* to be sure we don't lock up the transmitter */ + + /* setup the dma input descriptor and start dma */ + + start_receive(info); + + /* for safety, make sure the descriptors last result is 0 bytes written */ + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + + /* enable RTS/DTR last */ + + e100_rts(info, 1); + e100_dtr(info, 1); + +#endif /* CONFIG_SVINTO_SIM */ + + info->flags |= ASYNC_INITIALIZED; + + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void +shutdown(struct e100_serial * info) +{ + unsigned long flags; + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + +#ifndef CONFIG_SVINTO_SIM + /* shut down the transmitter and receiver */ + DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); + e100_disable_rx(info); + info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + + /* disable interrupts, reset dma channels */ + if (info->uses_dma_in) { + e100_disable_rxdma_irq(info); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_in = 0; + } else { + e100_disable_serial_data_irq(info); + } + + if (info->uses_dma_out) { + e100_disable_txdma_irq(info); + info->tr_running = 0; + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_out = 0; + } else { + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + } + +#endif /* CONFIG_SVINTO_SIM */ + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +#endif + + local_irq_save(flags); + + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; + } + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + if (descr[i].buf) { + buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; + kfree(buffer); + descr[i].buf = 0; + } + + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { + /* hang up DTR and RTS if HUPCL is enabled */ + e100_dtr(info, 0); + e100_rts(info, 0); /* could check CRTSCTS before doing this */ + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + + +/* change baud rate and other assorted parameters */ + +static void +change_speed(struct e100_serial *info) +{ + unsigned int cflag; + unsigned long xoff; + unsigned long flags; + /* first some safety checks */ + + if (!info->port.tty || !info->port.tty->termios) + return; + if (!info->ioport) + return; + + cflag = info->port.tty->termios->c_cflag; + + /* possibly, the tx/rx should be disabled first to do this safely */ + + /* change baud-rate and write it to the hardware */ + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { + /* Special baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + /* R_ALT_SER_BAUDRATE selects the source */ + DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor)); + if (info->baud_base == SERIAL_PRESCALE_BASE) { + /* 0, 2-65535 (0=65536) */ + u16 divisor = info->custom_divisor; + /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ + /* baudrate is 3.125MHz/custom_divisor */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); + alt_source = 0x11; + DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); + *R_SERIAL_PRESCALE = divisor; + info->baud = SERIAL_PRESCALE_BASE/divisor; + } +#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED + else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && + info->custom_divisor == 1) || + (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && + info->custom_divisor == 8)) { + /* ext_clk selected */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); + DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); + info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; + } +#endif + else + { + /* Bad baudbase, we don't support using timer0 + * for baudrate. + */ + printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor); + } + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; + } else { + /* Normal baudrate */ + /* Make sure we use normal baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); +#ifndef CONFIG_SVINTO_SIM + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; +#endif /* CONFIG_SVINTO_SIM */ + + info->baud = cflag_to_baud(cflag); +#ifndef CONFIG_SVINTO_SIM + info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); +#endif /* CONFIG_SVINTO_SIM */ + } + +#ifndef CONFIG_SVINTO_SIM + /* start with default settings and then fill in changes */ + local_irq_save(flags); + /* 8 bit, no/even parity */ + info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); + + /* 8 bit, no/even parity, 1 stop bit, no cts */ + info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | + IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | + IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); + + if ((cflag & CSIZE) == CS7) { + /* set 7 bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); + } + + if (cflag & CSTOPB) { + /* set 2 stop bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); + } + + if (cflag & PARENB) { + /* enable parity */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); + } + + if (cflag & CMSPAR) { + /* enable stick parity, PARODD mean Mark which matches ETRAX */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); + } + if (cflag & PARODD) { + /* set odd parity (or Mark if CMSPAR) */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); + } + + if (cflag & CRTSCTS) { + /* enable automatic CTS handling */ + DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); + } + + /* make sure the tx and rx are enabled */ + + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); + + /* actually write the control regs to the hardware */ + + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (info->port.tty->termios->c_iflag & IXON ) { + DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", + STOP_CHAR(info->port.tty))); + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + local_irq_restore(flags); +#endif /* !CONFIG_SVINTO_SIM */ + + update_char_time(info); + +} /* change_speed */ + +/* start transmitting chars NOW */ + +static void +rs_flush_chars(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (info->tr_running || + info->xmit.head == info->xmit.tail || + tty->stopped || + tty->hw_stopped || + !info->xmit.buf) + return; + +#ifdef SERIAL_DEBUG_FLOW + printk("rs_flush_chars\n"); +#endif + + /* this protection might not exactly be necessary here */ + + local_irq_save(flags); + start_transmit(info); + local_irq_restore(flags); +} + +static int rs_raw_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + /* first some sanity checks */ + + if (!tty || !info->xmit.buf || !tmp_buf) + return 0; + +#ifdef SERIAL_DEBUG_DATA + if (info->line == SERIAL_DEBUG_LINE) + printk("rs_raw_write (%d), status %d\n", + count, info->ioport[REG_STATUS]); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Really simple. The output is here and now. */ + SIMCOUT(buf, count); + return count; +#endif + local_save_flags(flags); + DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); + DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); + + + /* The local_irq_disable/restore_flags pairs below are needed + * because the DMA interrupt handler moves the info->xmit values. + * the memcpy needs to be in the critical region unfortunately, + * because we need to read xmit values, memcpy, write xmit values + * in one atomic operation... this could perhaps be avoided by + * more clever design. + */ + local_irq_disable(); + while (count) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + + if (count < c) + c = count; + if (c <= 0) + break; + + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = (info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + + /* enable transmitter if not running, unless the tty is stopped + * this does not need IRQ protection since if tr_running == 0 + * the IRQ's are not running anyway for this port. + */ + DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); + + if (info->xmit.head != info->xmit.tail && + !tty->stopped && + !tty->hw_stopped && + !info->tr_running) { + start_transmit(info); + } + + return ret; +} /* raw_raw_write() */ + +static int +rs_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ +#if defined(CONFIG_ETRAX_RS485) + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + if (info->rs485.flags & SER_RS485_ENABLED) + { + /* If we are in RS-485 mode, we need to toggle RTS and disable + * the receiver before initiating a DMA transfer + */ +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Abort any started timer */ + fast_timers_rs485[info->line].function = NULL; + del_fast_timer(&fast_timers_rs485[info->line]); +#endif + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_disable_rx(info); + e100_enable_rx_irq(info); +#endif + if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && + (info->rs485.delay_rts_before_send > 0)) + msleep(info->rs485.delay_rts_before_send); + } +#endif /* CONFIG_ETRAX_RS485 */ + + count = rs_raw_write(tty, buf, count); + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.flags & SER_RS485_ENABLED) + { + unsigned int val; + /* If we are in RS-485 mode the following has to be done: + * wait until DMA is ready + * wait on transmit shift register + * toggle RTS + * enable the receiver + */ + + /* Sleep until all sent */ + tty_wait_until_sent(tty, 0); +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Now sleep a little more so that shift register is empty */ + schedule_usleep(info->char_time_usec * 2); +#endif + /* wait on transmit shift register */ + do{ + get_lsr_info(info, &val); + }while (!(val & TIOCSER_TEMT)); + + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); + +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rxdma_irq(info); +#endif + } +#endif /* CONFIG_ETRAX_RS485 */ + + return count; +} /* rs_write */ + + +/* how much space is available in the xmit buffer? */ + +static int +rs_write_room(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* How many chars are in the xmit buffer? + * This does not include any chars in the transmitter FIFO. + * Use wait_until_sent for waiting for FIFO drain. + */ + +static int +rs_chars_in_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* discard everything in the xmit buffer */ + +static void +rs_flush_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + * + * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), + * but we do it in handle_ser_tx_interrupt(). + * We disable DMA channel and enable tx ready interrupt and write the + * character when possible. + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + local_irq_save(flags); + if (info->uses_dma_out) { + /* Put the DMA on hold and disable the channel */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); + e100_disable_txdma_channel(info); + } + + /* Must make sure transmitter is not stopped before we can transmit */ + if (tty->stopped) + rs_start(tty); + + /* Enable manual transmit interrupt and send from there */ + DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); + info->x_char = ch; + e100_enable_serial_tx_ready_irq(info); + local_irq_restore(flags); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void +rs_throttle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); + + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Turn off RTS line */ + e100_rts(info, 0); + } + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + +} + +static void +rs_unthrottle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Assert RTS line */ + e100_rts(info, 1); + } + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int +get_serial_info(struct e100_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + /* this is all probably wrong, there are a lot of fields + * here that we don't have in e100_serial and maybe we + * should set them to something else than 0. + */ + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (int)info->ioport; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int +set_serial_info(struct e100_serial *info, + struct serial_struct *new_info) +{ + struct serial_struct new_serial; + struct e100_serial old_info; + int retval = 0; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->custom_divisor = new_serial.custom_divisor; + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + change_speed(info); + } else + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int +get_lsr_info(struct e100_serial * info, unsigned int *value) +{ + unsigned int result = TIOCSER_TEMT; +#ifndef CONFIG_SVINTO_SIM + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + unsigned long elapsed_usec = + (curr_time - info->last_tx_active) * 1000000/HZ + + curr_time_usec - info->last_tx_active_usec; + + if (info->xmit.head != info->xmit.tail || + elapsed_usec < 2*info->char_time_usec) { + result = 0; + } +#endif + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +#ifdef SERIAL_DEBUG_IO +struct state_str +{ + int state; + const char *str; +}; + +const struct state_str control_state_str[] = { + {TIOCM_DTR, "DTR" }, + {TIOCM_RTS, "RTS"}, + {TIOCM_ST, "ST?" }, + {TIOCM_SR, "SR?" }, + {TIOCM_CTS, "CTS" }, + {TIOCM_CD, "CD" }, + {TIOCM_RI, "RI" }, + {TIOCM_DSR, "DSR" }, + {0, NULL } +}; + +char *get_control_state_str(int MLines, char *s) +{ + int i = 0; + + s[0]='\0'; + while (control_state_str[i].str != NULL) { + if (MLines & control_state_str[i].state) { + if (s[0] != '\0') { + strcat(s, ", "); + } + strcat(s, control_state_str[i].str); + } + i++; + } + return s; +} +#endif + +static int +rs_break(struct tty_struct *tty, int break_state) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info->ioport) + return -EIO; + + local_irq_save(flags); + if (break_state == -1) { + /* Go to manual mode and set the txd pin to 0 */ + /* Clear bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl &= 0x3F; + } else { + /* Set bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl |= (0x80 | 0x40); + } + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + local_irq_restore(flags); + return 0; +} + +static int +rs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + + if (clear & TIOCM_RTS) + e100_rts(info, 0); + if (clear & TIOCM_DTR) + e100_dtr(info, 0); + /* Handle FEMALE behaviour */ + if (clear & TIOCM_RI) + e100_ri_out(info, 0); + if (clear & TIOCM_CD) + e100_cd_out(info, 0); + + if (set & TIOCM_RTS) + e100_rts(info, 1); + if (set & TIOCM_DTR) + e100_dtr(info, 1); + /* Handle FEMALE behaviour */ + if (set & TIOCM_RI) + e100_ri_out(info, 1); + if (set & TIOCM_CD) + e100_cd_out(info, 1); + + local_irq_restore(flags); + return 0; +} + +static int +rs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned int result; + unsigned long flags; + + local_irq_save(flags); + + result = + (!E100_RTS_GET(info) ? TIOCM_RTS : 0) + | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) + | (!E100_RI_GET(info) ? TIOCM_RNG : 0) + | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) + | (!E100_CD_GET(info) ? TIOCM_CAR : 0) + | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); + + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_IO + printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", + info->line, result, result); + { + char s[100]; + + get_control_state_str(result, s); + printk(KERN_DEBUG "state: %s\n", s); + } +#endif + return result; + +} + + +static int +rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + if (copy_to_user((struct e100_serial *) arg, + info, sizeof(struct e100_serial))) + return -EFAULT; + return 0; + +#if defined(CONFIG_ETRAX_RS485) + case TIOCSERSETRS485: + { + /* In this ioctl we still use the old structure + * rs485_control for backward compatibility + * (if we use serial_rs485, then old user-level code + * wouldn't work anymore...). + * The use of this ioctl is deprecated: use TIOCSRS485 + * instead.*/ + struct rs485_control rs485ctrl; + struct serial_rs485 rs485data; + printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); + if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, + sizeof(rs485ctrl))) + return -EFAULT; + + rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; + rs485data.flags = 0; + if (rs485data.delay_rts_before_send != 0) + rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); + + if (rs485ctrl.enabled) + rs485data.flags |= SER_RS485_ENABLED; + else + rs485data.flags &= ~(SER_RS485_ENABLED); + + if (rs485ctrl.rts_on_send) + rs485data.flags |= SER_RS485_RTS_ON_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); + + if (rs485ctrl.rts_after_sent) + rs485data.flags |= SER_RS485_RTS_AFTER_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); + + return e100_enable_rs485(tty, &rs485data); + } + + case TIOCSRS485: + { + /* This is the new version of TIOCSRS485, with new + * data structure serial_rs485 */ + struct serial_rs485 rs485data; + if (copy_from_user(&rs485data, (struct rs485_control *)arg, + sizeof(rs485data))) + return -EFAULT; + + return e100_enable_rs485(tty, &rs485data); + } + + case TIOCGRS485: + { + struct serial_rs485 *rs485data = + &(((struct e100_serial *)tty->driver_data)->rs485); + /* This is the ioctl to get RS485 data from user-space */ + if (copy_to_user((struct serial_rs485 *) arg, + rs485data, + sizeof(struct serial_rs485))) + return -EFAULT; + break; + } + + case TIOCSERWRRS485: + { + struct rs485_write rs485wr; + if (copy_from_user(&rs485wr, (struct rs485_write *)arg, + sizeof(rs485wr))) + return -EFAULT; + + return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); + } +#endif + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void +rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + change_speed(info); + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void +rs_close(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info) + return; + + /* interrupts are disabled for this entire function */ + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, + info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_CRIT + "rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Save the termios structure, since this port may have + * separate termios for callout and dialin. + */ + if (info->flags & ASYNC_NORMAL_ACTIVE) + info->normal_termios = *tty->termios; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the serial receiver and the DMA receive interrupt. + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_disable_serial_data_irq(info); +#endif + +#ifndef CONFIG_SVINTO_SIM + e100_disable_rx(info); + e100_disable_rx_irq(info); + + if (info->flags & ASYNC_INITIALIZED) { + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important as we have a transmit FIFO! + */ + rs_wait_until_sent(tty, HZ); + } +#endif + + shutdown(info); + rs_flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; + if (info->blocked_open) { + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); + + /* port closed */ + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.flags & SER_RS485_ENABLED) { + info->rs485.flags &= ~(SER_RS485_ENABLED); +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 0); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); +#endif + } +#endif + + /* + * Release any allocated DMA irq's. + */ + if (info->dma_in_enabled) { + free_irq(info->dma_in_irq_nbr, info); + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + info->uses_dma_in = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + free_irq(info->dma_out_irq_nbr, info); + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + info->uses_dma_out = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_out_irq_description); +#endif + } +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long orig_jiffies; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + long elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + + /* + * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO + * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) + */ + orig_jiffies = jiffies; + while (info->xmit.head != info->xmit.tail || /* More in send queue */ + (*info->ostatusadr & 0x007f) || /* more in FIFO */ + (elapsed_usec < 2*info->char_time_usec)) { + schedule_timeout_interruptible(1); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + curr_time = jiffies; + curr_time_usec = GET_JIFFIES_USEC(); + elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + } + set_current_state(TASK_RUNNING); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void +rs_hangup(struct tty_struct *tty) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int +block_til_ready(struct tty_struct *tty, struct file * filp, + struct e100_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int retval; + int do_clocal = 0, extra_count = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + wait_event_interruptible_tty(info->close_wait, + !(info->flags & ASYNC_CLOSING)); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) { + do_clocal = 1; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); +#endif + local_irq_save(flags); + if (!tty_hung_up_p(filp)) { + extra_count++; + info->count--; + } + local_irq_restore(flags); + info->blocked_open++; + while (1) { + local_irq_save(flags); + /* assert RTS and DTR */ + e100_rts(info, 1); + e100_dtr(info, 1); + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && do_clocal) + /* && (do_clocal || DCD_IS_ASSERTED) */ + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (extra_count) + info->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static void +deinit_port(struct e100_serial *info) +{ + if (info->dma_out_enabled) { + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + free_irq(info->dma_out_irq_nbr, info); + } + if (info->dma_in_enabled) { + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + free_irq(info->dma_in_irq_nbr, info); + } +} + +/* + * This routine is called whenever a serial port is opened. + * It performs the serial-specific initialization for the tty structure. + */ +static int +rs_open(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial *info; + int retval, line; + unsigned long page; + int allocated_resources = 0; + + /* find which port we want to open */ + line = tty->index; + + if (line < 0 || line >= NR_PORTS) + return -ENODEV; + + /* find the corresponding e100_serial struct in the table */ + info = rs_table + line; + + /* don't allow the opening of ports that are not enabled in the HW config */ + if (!info->enabled) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, + info->count); +#endif + + info->count++; + tty->driver_data = info; + info->port.tty = tty; + + info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) { + return -ENOMEM; + } + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + /* + * If the port is in the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + wait_event_interruptible_tty(info->close_wait, + !(info->flags & ASYNC_CLOSING)); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * If DMA is enabled try to allocate the irq's. + */ + if (info->count == 1) { + allocated_resources = 1; + if (info->dma_in_enabled) { + if (request_irq(info->dma_in_irq_nbr, + rec_interrupt, + info->dma_in_irq_flags, + info->dma_in_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } else if (cris_request_dma(info->dma_in_nbr, + info->dma_in_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_in_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + if (request_irq(info->dma_out_irq_nbr, + tr_interrupt, + info->dma_out_irq_flags, + info->dma_out_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } else if (cris_request_dma(info->dma_out_nbr, + info->dma_out_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_out_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_out_irq_description); +#endif + } + } + + /* + * Start up the serial port + */ + + retval = startup(info); + if (retval) { + if (allocated_resources) + deinit_port(info); + + /* FIXME Decrease count info->count here too? */ + return retval; + } + + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + if (allocated_resources) + deinit_port(info); + + return retval; + } + + if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { + *tty->termios = info->normal_termios; + change_speed(info); + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open ttyS%d successful...\n", info->line); +#endif + DLOG_INT_TRIG( log_int_pos = 0); + + DFLIP( if (info->line == SERIAL_DEBUG_LINE) { + info->icount.rx = 0; + } ); + + return 0; +} + +#ifdef CONFIG_PROC_FS +/* + * /proc fs routines.... + */ + +static void seq_line_info(struct seq_file *m, struct e100_serial *info) +{ + unsigned long tmp; + + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); + + if (!info->ioport || (info->type == PORT_UNKNOWN)) { + seq_printf(m, "\n"); + return; + } + + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", + (unsigned long)info->icount.tx, + (unsigned long)info->icount.rx); + tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); + + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); + +#if 1 + if (info->port.tty) { + if (info->port.tty->stopped) + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); + if (info->port.tty->hw_stopped) + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); + } + + { + unsigned char rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); + } + +#endif + + if (info->icount.frame) + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); + + if (info->icount.parity) + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); + + if (info->icount.brk) + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); + + if (info->icount.overrun) + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); +} + + +static int crisv10_proc_show(struct seq_file *m, void *v) +{ + int i; + + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { + if (!rs_table[i].enabled) + continue; + seq_line_info(m, &rs_table[i]); + } +#ifdef DEBUG_LOG_INCLUDED + for (i = 0; i < debug_log_pos; i++) { + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); + } + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); + debug_log_pos = 0; +#endif + return 0; +} + +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); +} + +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk(KERN_INFO + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", + &serial_version[11]); /* "$Revision: x.yy" */ +} + +/* rs_init inits the driver at boot (using the module_init chain) */ + +static const struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif +}; + +static int __init rs_init(void) +{ + int i; + struct e100_serial *info; + struct tty_driver *driver = alloc_tty_driver(NR_PORTS); + + if (!driver) + return -ENOMEM; + + show_serial_version(); + + /* Setup the timed flush handler system */ + +#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) + setup_timer(&flush_timer, timed_flush_handler, 0); + mod_timer(&flush_timer, jiffies + 5); +#endif + +#if defined(CONFIG_ETRAX_RS485) +#if defined(CONFIG_ETRAX_RS485_ON_PA) + if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + rs485_pa_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + put_tty_driver(driver); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + rs485_port_g_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + put_tty_driver(driver); + return -EBUSY; + } +#endif +#endif + + /* Initialize the tty_driver structure */ + + driver->driver_name = "serial"; + driver->name = "ttyS"; + driver->major = TTY_MAJOR; + driver->minor_start = 64; + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + driver->init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + driver->init_termios.c_ispeed = 115200; + driver->init_termios.c_ospeed = 115200; + driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + + tty_set_operations(driver, &rs_ops); + serial_driver = driver; + if (tty_register_driver(driver)) + panic("Couldn't register serial driver\n"); + /* do some initializing for the separate ports */ + + for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { + if (info->enabled) { + if (cris_request_io_interface(info->io_if, + info->io_if_description)) { + printk(KERN_CRIT "ETRAX100LX async serial: " + "Could not allocate IO pins for " + "%s, port %d\n", + info->io_if_description, i); + info->enabled = 0; + } + } + info->uses_dma_in = 0; + info->uses_dma_out = 0; + info->line = i; + info->port.tty = NULL; + info->type = PORT_ETRAX; + info->tr_running = 0; + info->forced_eop = 0; + info->baud_base = DEF_BAUD_BASE; + info->custom_divisor = 0; + info->flags = 0; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->normal_termios = driver->init_termios; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->xmit.buf = NULL; + info->xmit.tail = info->xmit.head = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + info->last_tx_active_usec = 0; + info->last_tx_active = 0; + +#if defined(CONFIG_ETRAX_RS485) + /* Set sane defaults */ + info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); + info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; + info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); + info->rs485.delay_rts_before_send = 0; + info->rs485.flags &= ~(SER_RS485_ENABLED); +#endif + INIT_WORK(&info->work, do_softint); + + if (info->enabled) { + printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", + serial_driver->name, info->line, info->ioport); + } + } +#ifdef CONFIG_ETRAX_FAST_TIMER +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER + memset(fast_timers, 0, sizeof(fast_timers)); +#endif +#ifdef CONFIG_ETRAX_RS485 + memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); +#endif + fast_timer_init(); +#endif + +#ifndef CONFIG_SVINTO_SIM +#ifndef CONFIG_ETRAX_KGDB + /* Not needed in simulator. May only complicate stuff. */ + /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ + + if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, + IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) + panic("%s: Failed to request irq8", __func__); + +#endif +#endif /* CONFIG_SVINTO_SIM */ + + return 0; +} + +/* this makes sure that rs_init is called during kernel boot */ + +module_init(rs_init); diff --git a/drivers/tty/serial/crisv10.h b/drivers/tty/serial/crisv10.h new file mode 100644 index 0000000..ea0beb4 --- /dev/null +++ b/drivers/tty/serial/crisv10.h @@ -0,0 +1,147 @@ +/* + * serial.h: Arch-dep definitions for the Etrax100 serial driver. + * + * Copyright (C) 1998-2007 Axis Communications AB + */ + +#ifndef _ETRAX_SERIAL_H +#define _ETRAX_SERIAL_H + +#include +#include +#include +#include + +/* Software state per channel */ + +#ifdef __KERNEL__ +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +#define SERIAL_RECV_DESCRIPTORS 8 + +struct etrax_recv_buffer { + struct etrax_recv_buffer *next; + unsigned short length; + unsigned char error; + unsigned char pad; + + unsigned char buffer[0]; +}; + +struct e100_serial { + struct tty_port port; + int baud; + volatile u8 *ioport; /* R_SERIALx_CTRL */ + u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ + + /* Output registers */ + volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ + const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ + + /* Input registers */ + volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ + volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ + + int flags; /* defined in tty.h */ + + u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ + u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ + u8 iseteop; /* bit number for R_SET_EOP for the input dma */ + int enabled; /* Set to 1 if the port is enabled in HW config */ + + u8 dma_out_enabled; /* Set to 1 if DMA should be used */ + u8 dma_in_enabled; /* Set to 1 if DMA should be used */ + + /* end of fields defined in rs_table[] in .c-file */ + int dma_owner; + unsigned int dma_in_nbr; + unsigned int dma_out_nbr; + unsigned int dma_in_irq_nbr; + unsigned int dma_out_irq_nbr; + unsigned long dma_in_irq_flags; + unsigned long dma_out_irq_flags; + char *dma_in_irq_description; + char *dma_out_irq_description; + + enum cris_io_interface io_if; + char *io_if_description; + + u8 uses_dma_in; /* Set to 1 if DMA is used */ + u8 uses_dma_out; /* Set to 1 if DMA is used */ + u8 forced_eop; /* a fifo eop has been forced */ + int baud_base; /* For special baudrates */ + int custom_divisor; /* For special baudrates */ + struct etrax_dma_descr tr_descr; + struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; + int cur_rec_descr; + + volatile int tr_running; /* 1 if output is running */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int type; /* PORT_ETRAX */ + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + struct circ_buf xmit; + struct etrax_recv_buffer *first_recv_buffer; + struct etrax_recv_buffer *last_recv_buffer; + unsigned int recv_cnt; + unsigned int max_recv_cnt; + + struct work_struct work; + struct async_icount icount; /* error-statistics etc.*/ + struct ktermios normal_termios; + struct ktermios callout_termios; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + unsigned long char_time_usec; /* The time for 1 char, in usecs */ + unsigned long flush_time_usec; /* How often we should flush */ + unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ + unsigned long last_tx_active; /* Last tx time in jiffies */ + unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ + unsigned long last_rx_active; /* Last rx time in jiffies */ + + int break_detected_cnt; + int errorcode; + +#ifdef CONFIG_ETRAX_RS485 + struct serial_rs485 rs485; /* RS-485 support */ +#endif +}; + +/* this PORT is not in the standard serial.h. it's not actually used for + * anything since we only have one type of async serial-port anyway in this + * system. + */ + +#define PORT_ETRAX 1 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +#endif /* __KERNEL__ */ + +#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c new file mode 100644 index 0000000..57421d7 --- /dev/null +++ b/drivers/tty/serial/dz.c @@ -0,0 +1,955 @@ +/* + * dz.c: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki + * + * [31-AUG-98] triemer + * Changed IRQ to use Harald's dec internals interrupts.h + * removed base_addr code - moving address assignment to setup.c + * Changed name of dz_init to rs_init to be consistent with tc code + * [13-NOV-98] triemer fixed code to receive characters + * after patches by harald to irq code. + * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout + * field from "current" - somewhere between 2.1.121 and 2.1.131 + Qua Jun 27 15:02:26 BRT 2001 + * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups + * + * Parts (C) 1999 David Airlie, airlied@linux.ie + * [07-SEP-99] Bugfixes + * + * [06-Jan-2002] Russell King + * Converted to new serial core + */ + +#undef DEBUG_DZ + +#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "dz.h" + + +MODULE_DESCRIPTION("DECstation DZ serial driver"); +MODULE_LICENSE("GPL"); + + +static char dz_name[] __initdata = "DECstation DZ serial driver version "; +static char dz_version[] __initdata = "1.04"; + +struct dz_port { + struct dz_mux *mux; + struct uart_port port; + unsigned int cflag; +}; + +struct dz_mux { + struct dz_port dport[DZ_NB_PORT]; + atomic_t map_guard; + atomic_t irq_guard; + int initialised; +}; + +static struct dz_mux dz_mux; + +static inline struct dz_port *to_dport(struct uart_port *uport) +{ + return container_of(uport, struct dz_port, port); +} + +/* + * ------------------------------------------------------------ + * dz_in () and dz_out () + * + * These routines are used to access the registers of the DZ + * chip, hiding relocation differences between implementation. + * ------------------------------------------------------------ + */ + +static u16 dz_in(struct dz_port *dport, unsigned offset) +{ + void __iomem *addr = dport->port.membase + offset; + + return readw(addr); +} + +static void dz_out(struct dz_port *dport, unsigned offset, u16 value) +{ + void __iomem *addr = dport->port.membase + offset; + + writew(value, addr); +} + +/* + * ------------------------------------------------------------ + * rs_stop () and rs_start () + * + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, + * as necessary. + * ------------------------------------------------------------ + */ + +static void dz_stop_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp &= ~mask; /* clear the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_start_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp |= mask; /* set the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_stop_rx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + + dport->cflag &= ~DZ_RXENAB; + dz_out(dport, DZ_LPR, dport->cflag); +} + +static void dz_enable_ms(struct uart_port *uport) +{ + /* nothing to do */ +} + +/* + * ------------------------------------------------------------ + * + * Here start the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * dz_interrupt. They were separated out for readability's sake. + * + * Note: dz_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * dz_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * make drivers/serial/dz.s + * + * and look at the resulting assemble code in dz.s. + * + * ------------------------------------------------------------ + */ + +/* + * ------------------------------------------------------------ + * receive_char () + * + * This routine deals with inputs from any lines. + * ------------------------------------------------------------ + */ +static inline void dz_receive_chars(struct dz_mux *mux) +{ + struct uart_port *uport; + struct dz_port *dport = &mux->dport[0]; + struct tty_struct *tty = NULL; + struct uart_icount *icount; + int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; + unsigned char ch, flag; + u16 status; + int i; + + while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { + dport = &mux->dport[LINE(status)]; + uport = &dport->port; + tty = uport->state->port.tty; /* point to the proper dev */ + + ch = UCHAR(status); /* grab the char */ + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { + + /* + * There is no separate BREAK status bit, so treat + * null characters with framing errors as BREAKs; + * normally, otherwise. For this move the Framing + * Error bit to a simulated BREAK bit. + */ + if (!ch) { + status |= (status & DZ_FERR) >> + (ffs(DZ_FERR) - ffs(DZ_BREAK)); + status &= ~DZ_FERR; + } + + /* Handle SysRq/SAK & keep track of the statistics. */ + if (status & DZ_BREAK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & DZ_FERR) + icount->frame++; + else if (status & DZ_PERR) + icount->parity++; + if (status & DZ_OERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & DZ_BREAK) + flag = TTY_BREAK; + else if (status & DZ_FERR) + flag = TTY_FRAME; + else if (status & DZ_PERR) + flag = TTY_PARITY; + + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, DZ_OERR, ch, flag); + lines_rx[LINE(status)] = 1; + } + for (i = 0; i < DZ_NB_PORT; i++) + if (lines_rx[i]) + tty_flip_buffer_push(mux->dport[i].port.state->port.tty); +} + +/* + * ------------------------------------------------------------ + * transmit_char () + * + * This routine deals with outputs to any lines. + * ------------------------------------------------------------ + */ +static inline void dz_transmit_chars(struct dz_mux *mux) +{ + struct dz_port *dport = &mux->dport[0]; + struct circ_buf *xmit; + unsigned char tmp; + u16 status; + + status = dz_in(dport, DZ_CSR); + dport = &mux->dport[LINE(status)]; + xmit = &dport->port.state->xmit; + + if (dport->port.x_char) { /* XON/XOFF chars */ + dz_out(dport, DZ_TDR, dport->port.x_char); + dport->port.icount.tx++; + dport->port.x_char = 0; + return; + } + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + return; + } + + /* + * If something to do... (remember the dz has no output fifo, + * so we go one char at a time) :-< + */ + tmp = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); + dz_out(dport, DZ_TDR, tmp); + dport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) + uart_write_wakeup(&dport->port); + + /* Are we are done. */ + if (uart_circ_empty(xmit)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + } +} + +/* + * ------------------------------------------------------------ + * check_modem_status() + * + * DS 3100 & 5100: Only valid for the MODEM line, duh! + * DS 5000/200: Valid for the MODEM and PRINTER line. + * ------------------------------------------------------------ + */ +static inline void check_modem_status(struct dz_port *dport) +{ + /* + * FIXME: + * 1. No status change interrupt; use a timer. + * 2. Handle the 3100/5000 as appropriate. --macro + */ + u16 status; + + /* If not the modem line just return. */ + if (dport->port.line != DZ_MODEM) + return; + + status = dz_in(dport, DZ_MSR); + + /* it's easy, since DSR2 is the only bit in the register */ + if (status) + dport->port.icount.dsr++; +} + +/* + * ------------------------------------------------------------ + * dz_interrupt () + * + * this is the main interrupt routine for the DZ chip. + * It deals with the multiple ports. + * ------------------------------------------------------------ + */ +static irqreturn_t dz_interrupt(int irq, void *dev_id) +{ + struct dz_mux *mux = dev_id; + struct dz_port *dport = &mux->dport[0]; + u16 status; + + /* get the reason why we just got an irq */ + status = dz_in(dport, DZ_CSR); + + if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) + dz_receive_chars(mux); + + if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) + dz_transmit_chars(mux); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the DZ interrupt routines. + * ------------------------------------------------------------------- + */ + +static unsigned int dz_get_mctrl(struct uart_port *uport) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + + if (dport->port.line == DZ_MODEM) { + if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) + mctrl &= ~TIOCM_DSR; + } + + return mctrl; +} + +static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + u16 tmp; + + if (dport->port.line == DZ_MODEM) { + tmp = dz_in(dport, DZ_TCR); + if (mctrl & TIOCM_DTR) + tmp &= ~DZ_MODEM_DTR; + else + tmp |= DZ_MODEM_DTR; + dz_out(dport, DZ_TCR, tmp); + } +} + +/* + * ------------------------------------------------------------------- + * startup () + * + * various initialization tasks + * ------------------------------------------------------------------- + */ +static int dz_startup(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + int ret; + u16 tmp; + + irq_guard = atomic_add_return(1, &mux->irq_guard); + if (irq_guard != 1) + return 0; + + ret = request_irq(dport->port.irq, dz_interrupt, + IRQF_SHARED, "dz", mux); + if (ret) { + atomic_add(-1, &mux->irq_guard); + printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); + return ret; + } + + spin_lock_irqsave(&dport->port.lock, flags); + + /* Enable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp |= DZ_RIE | DZ_TIE; + dz_out(dport, DZ_CSR, tmp); + + spin_unlock_irqrestore(&dport->port.lock, flags); + + return 0; +} + +/* + * ------------------------------------------------------------------- + * shutdown () + * + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + * ------------------------------------------------------------------- + */ +static void dz_shutdown(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + u16 tmp; + + spin_lock_irqsave(&dport->port.lock, flags); + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); + + irq_guard = atomic_add_return(-1, &mux->irq_guard); + if (!irq_guard) { + /* Disable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp &= ~(DZ_RIE | DZ_TIE); + dz_out(dport, DZ_CSR, tmp); + + free_irq(dport->port.irq, mux); + } +} + +/* + * ------------------------------------------------------------------- + * dz_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + * ------------------------------------------------------------------- + */ +static unsigned int dz_tx_empty(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + unsigned short tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); + tmp &= mask; + + return tmp ? 0 : TIOCSER_TEMT; +} + +static void dz_break_ctl(struct uart_port *uport, int break_state) +{ + /* + * FIXME: Can't access BREAK bits in TDR easily; + * reuse the code for polled TX. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short tmp, mask = 1 << dport->port.line; + + spin_lock_irqsave(&uport->lock, flags); + tmp = dz_in(dport, DZ_TCR); + if (break_state) + tmp |= mask; + else + tmp &= ~mask; + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int dz_encode_baud_rate(unsigned int baud) +{ + switch (baud) { + case 50: + return DZ_B50; + case 75: + return DZ_B75; + case 110: + return DZ_B110; + case 134: + return DZ_B134; + case 150: + return DZ_B150; + case 300: + return DZ_B300; + case 600: + return DZ_B600; + case 1200: + return DZ_B1200; + case 1800: + return DZ_B1800; + case 2000: + return DZ_B2000; + case 2400: + return DZ_B2400; + case 3600: + return DZ_B3600; + case 4800: + return DZ_B4800; + case 7200: + return DZ_B7200; + case 9600: + return DZ_B9600; + default: + return -1; + } +} + + +static void dz_reset(struct dz_port *dport) +{ + struct dz_mux *mux = dport->mux; + + if (mux->initialised) + return; + + dz_out(dport, DZ_CSR, DZ_CLR); + while (dz_in(dport, DZ_CSR) & DZ_CLR); + iob(); + + /* Enable scanning. */ + dz_out(dport, DZ_CSR, DZ_MSE); + + mux->initialised = 1; +} + +static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned int cflag, baud; + int bflag; + + cflag = dport->port.line; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cflag |= DZ_CS5; + break; + case CS6: + cflag |= DZ_CS6; + break; + case CS7: + cflag |= DZ_CS7; + break; + case CS8: + default: + cflag |= DZ_CS8; + } + + if (termios->c_cflag & CSTOPB) + cflag |= DZ_CSTOPB; + if (termios->c_cflag & PARENB) + cflag |= DZ_PARENB; + if (termios->c_cflag & PARODD) + cflag |= DZ_PARODD; + + baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Try to keep unchanged. */ + baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Resort to 9600. */ + baud = 9600; + bflag = DZ_B9600; + } + tty_termios_encode_baud_rate(termios, baud, baud); + } + cflag |= bflag; + + if (termios->c_cflag & CREAD) + cflag |= DZ_RXENAB; + + spin_lock_irqsave(&dport->port.lock, flags); + + uart_update_timeout(uport, termios->c_cflag, baud); + + dz_out(dport, DZ_LPR, cflag); + dport->cflag = cflag; + + /* setup accept flag */ + dport->port.read_status_mask = DZ_OERR; + if (termios->c_iflag & INPCK) + dport->port.read_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + dport->port.read_status_mask |= DZ_BREAK; + + /* characters to ignore */ + uport->ignore_status_mask = 0; + if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) + dport->port.ignore_status_mask |= DZ_OERR; + if (termios->c_iflag & IGNPAR) + dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & IGNBRK) + dport->port.ignore_status_mask |= DZ_BREAK; + + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void dz_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + if (state < 3) + dz_start_tx(&dport->port); + else + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + + +static const char *dz_type(struct uart_port *uport) +{ + return "DZ"; +} + +static void dz_release_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + + iounmap(uport->membase); + uport->membase = NULL; + + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); +} + +static int dz_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + dec_kn_slot_size); + if (!uport->membase) { + printk(KERN_ERR "dz: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int dz_request_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + int ret; + + map_guard = atomic_add_return(1, &mux->map_guard); + if (map_guard == 1) { + if (!request_mem_region(uport->mapbase, dec_kn_slot_size, + "dz")) { + atomic_add(-1, &mux->map_guard); + printk(KERN_ERR + "dz: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + } + ret = dz_map_port(uport); + if (ret) { + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); + return ret; + } + return 0; +} + +static void dz_config_port(struct uart_port *uport, int flags) +{ + struct dz_port *dport = to_dport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (dz_request_port(uport)) + return; + + uport->type = PORT_DZ; + + dz_reset(dport); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + return ret; +} + +static struct uart_ops dz_ops = { + .tx_empty = dz_tx_empty, + .get_mctrl = dz_get_mctrl, + .set_mctrl = dz_set_mctrl, + .stop_tx = dz_stop_tx, + .start_tx = dz_start_tx, + .stop_rx = dz_stop_rx, + .enable_ms = dz_enable_ms, + .break_ctl = dz_break_ctl, + .startup = dz_startup, + .shutdown = dz_shutdown, + .set_termios = dz_set_termios, + .pm = dz_pm, + .type = dz_type, + .release_port = dz_release_port, + .request_port = dz_request_port, + .config_port = dz_config_port, + .verify_port = dz_verify_port, +}; + +static void __init dz_init_ports(void) +{ + static int first = 1; + unsigned long base; + int line; + + if (!first) + return; + first = 0; + + if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) + base = dec_kn_slot_base + KN01_DZ11; + else + base = dec_kn_slot_base + KN02_DZ11; + + for (line = 0; line < DZ_NB_PORT; line++) { + struct dz_port *dport = &dz_mux.dport[line]; + struct uart_port *uport = &dport->port; + + dport->mux = &dz_mux; + + uport->irq = dec_interrupt[DEC_IRQ_DZ11]; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &dz_ops; + uport->line = line; + uport->mapbase = base; + } +} + +#ifdef CONFIG_SERIAL_DZ_CONSOLE +/* + * ------------------------------------------------------------------- + * dz_console_putchar() -- transmit a character + * + * Polled transmission. This is tricky. We need to mask transmit + * interrupts so that they do not interfere, enable the transmitter + * for the line requested and then wait till the transmit scanner + * requests data for this line. But it may request data for another + * line first, in which case we have to disable its transmitter and + * repeat waiting till our line pops up. Only then the character may + * be transmitted. Finally, the state of the transmitter mask is + * restored. Welcome to the world of PDP-11! + * ------------------------------------------------------------------- + */ +static void dz_console_putchar(struct uart_port *uport, int ch) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short csr, tcr, trdy, mask; + int loops = 10000; + + spin_lock_irqsave(&dport->port.lock, flags); + csr = dz_in(dport, DZ_CSR); + dz_out(dport, DZ_CSR, csr & ~DZ_TIE); + tcr = dz_in(dport, DZ_TCR); + tcr |= 1 << dport->port.line; + mask = tcr; + dz_out(dport, DZ_TCR, mask); + iob(); + spin_unlock_irqrestore(&dport->port.lock, flags); + + do { + trdy = dz_in(dport, DZ_CSR); + if (!(trdy & DZ_TRDY)) + continue; + trdy = (trdy & DZ_TLINE) >> 8; + if (trdy == dport->port.line) + break; + mask &= ~(1 << trdy); + dz_out(dport, DZ_TCR, mask); + iob(); + udelay(2); + } while (--loops); + + if (loops) /* Cannot send otherwise. */ + dz_out(dport, DZ_TDR, ch); + + dz_out(dport, DZ_TCR, tcr); + dz_out(dport, DZ_CSR, csr); +} + +/* + * ------------------------------------------------------------------- + * dz_console_print () + * + * dz_console_print is registered for printk. + * The console must be locked when we get here. + * ------------------------------------------------------------------- + */ +static void dz_console_print(struct console *co, + const char *str, + unsigned int count) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; +#ifdef DEBUG_DZ + prom_printf((char *) str); +#endif + uart_console_write(&dport->port, str, count, dz_console_putchar); +} + +static int __init dz_console_setup(struct console *co, char *options) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; + struct uart_port *uport = &dport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = dz_map_port(uport); + if (ret) + return ret; + + spin_lock_init(&dport->port.lock); /* For dz_pm(). */ + + dz_reset(dport); + dz_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&dport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver dz_reg; +static struct console dz_console = { + .name = "ttyS", + .write = dz_console_print, + .device = uart_console_device, + .setup = dz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &dz_reg, +}; + +static int __init dz_serial_console_init(void) +{ + if (!IOASIC) { + dz_init_ports(); + register_console(&dz_console); + return 0; + } else + return -ENXIO; +} + +console_initcall(dz_serial_console_init); + +#define SERIAL_DZ_CONSOLE &dz_console +#else +#define SERIAL_DZ_CONSOLE NULL +#endif /* CONFIG_SERIAL_DZ_CONSOLE */ + +static struct uart_driver dz_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = DZ_NB_PORT, + .cons = SERIAL_DZ_CONSOLE, +}; + +static int __init dz_init(void) +{ + int ret, i; + + if (IOASIC) + return -ENXIO; + + printk("%s%s\n", dz_name, dz_version); + + dz_init_ports(); + + ret = uart_register_driver(&dz_reg); + if (ret) + return ret; + + for (i = 0; i < DZ_NB_PORT; i++) + uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); + + return 0; +} + +module_init(dz_init); diff --git a/drivers/tty/serial/dz.h b/drivers/tty/serial/dz.h new file mode 100644 index 0000000..faf169e --- /dev/null +++ b/drivers/tty/serial/dz.h @@ -0,0 +1,129 @@ +/* + * dz.h: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006 Maciej W. Rozycki + */ +#ifndef DZ_SERIAL_H +#define DZ_SERIAL_H + +/* + * Definitions for the Control and Status Register. + */ +#define DZ_TRDY 0x8000 /* Transmitter empty */ +#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ +#define DZ_TLINE 0x0300 /* Transmitter Line Number */ +#define DZ_RDONE 0x0080 /* Receiver data ready */ +#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ +#define DZ_MSE 0x0020 /* Master Scan Enable */ +#define DZ_CLR 0x0010 /* Master reset */ +#define DZ_MAINT 0x0008 /* Loop Back Mode */ + +/* + * Definitions for the Receiver Buffer Register. + */ +#define DZ_RBUF_MASK 0x00FF /* Data Mask */ +#define DZ_LINE_MASK 0x0300 /* Line Mask */ +#define DZ_DVAL 0x8000 /* Valid Data indicator */ +#define DZ_OERR 0x4000 /* Overrun error indicator */ +#define DZ_FERR 0x2000 /* Frame error indicator */ +#define DZ_PERR 0x1000 /* Parity error indicator */ + +#define DZ_BREAK 0x0800 /* BREAK event software flag */ + +#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number + from the input buffer */ +#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) + +/* + * Definitions for the Transmit Control Register. + */ +#define DZ_LINE_KEYBOARD 0x0001 +#define DZ_LINE_MOUSE 0x0002 +#define DZ_LINE_MODEM 0x0004 +#define DZ_LINE_PRINTER 0x0008 + +#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ +#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ +#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ +#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ +#define DZ_LNENB 0x000f /* Transmitter Line Enable */ + +/* + * Definitions for the Modem Status Register. + */ +#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ +#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ +#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ +#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ +#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ +#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ +#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ +#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ + +/* + * Definitions for the Transmit Data Register. + */ +#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ +#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ +#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ +#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ + +/* + * Definitions for the Line Parameter Register. + */ +#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ +#define DZ_MOUSE 0x0001 /* line 1 = mouse */ +#define DZ_MODEM 0x0002 /* line 2 = modem */ +#define DZ_PRINTER 0x0003 /* line 3 = printer */ + +#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ +#define DZ_CS5 0x0000 /* 5 bits per byte */ +#define DZ_CS6 0x0008 /* 6 bits per byte */ +#define DZ_CS7 0x0010 /* 7 bits per byte */ +#define DZ_CS8 0x0018 /* 8 bits per byte */ + +#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ + +#define DZ_PARENB 0x0040 /* Parity enable */ +#define DZ_PARODD 0x0080 /* Odd parity instead of even */ + +#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ +#define DZ_B50 0x0000 +#define DZ_B75 0x0100 +#define DZ_B110 0x0200 +#define DZ_B134 0x0300 +#define DZ_B150 0x0400 +#define DZ_B300 0x0500 +#define DZ_B600 0x0600 +#define DZ_B1200 0x0700 +#define DZ_B1800 0x0800 +#define DZ_B2000 0x0900 +#define DZ_B2400 0x0A00 +#define DZ_B3600 0x0B00 +#define DZ_B4800 0x0C00 +#define DZ_B7200 0x0D00 +#define DZ_B9600 0x0E00 + +#define DZ_RXENAB 0x1000 /* Receiver Enable */ + +/* + * Addresses for the DZ registers + */ +#define DZ_CSR 0x00 /* Control and Status Register */ +#define DZ_RBUF 0x08 /* Receive Buffer */ +#define DZ_LPR 0x08 /* Line Parameters Register */ +#define DZ_TCR 0x10 /* Transmitter Control Register */ +#define DZ_MSR 0x18 /* Modem Status Register */ +#define DZ_TDR 0x18 /* Transmit Data Register */ + +#define DZ_NB_PORT 4 + +#define DZ_XMIT_SIZE 4096 /* buffer size */ +#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 + +#endif /* DZ_SERIAL_H */ diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c new file mode 100644 index 0000000..53a4682 --- /dev/null +++ b/drivers/tty/serial/icom.c @@ -0,0 +1,1658 @@ +/* + * icom.c + * + * Copyright (C) 2001 IBM Corporation. All rights reserved. + * + * Serial device driver. + * + * Based on code from serial.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#define SERIAL_DO_RESTART +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "icom.h" + +/*#define ICOM_TRACE enable port trace capabilities */ + +#define ICOM_DRIVER_NAME "icom" +#define ICOM_VERSION_STR "1.3.1" +#define NR_PORTS 128 +#define ICOM_PORT ((struct icom_port *)port) +#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) + +static const struct pci_device_id icom_pci_table[] = { + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = ADAPTER_V1, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, + .driver_data = ADAPTER_V2, + }, + {} +}; + +struct lookup_proc_table start_proc[4] = { + {NULL, ICOM_CONTROL_START_A}, + {NULL, ICOM_CONTROL_START_B}, + {NULL, ICOM_CONTROL_START_C}, + {NULL, ICOM_CONTROL_START_D} +}; + + +struct lookup_proc_table stop_proc[4] = { + {NULL, ICOM_CONTROL_STOP_A}, + {NULL, ICOM_CONTROL_STOP_B}, + {NULL, ICOM_CONTROL_STOP_C}, + {NULL, ICOM_CONTROL_STOP_D} +}; + +struct lookup_int_table int_mask_tbl[4] = { + {NULL, ICOM_INT_MASK_PRC_A}, + {NULL, ICOM_INT_MASK_PRC_B}, + {NULL, ICOM_INT_MASK_PRC_C}, + {NULL, ICOM_INT_MASK_PRC_D}, +}; + + +MODULE_DEVICE_TABLE(pci, icom_pci_table); + +static LIST_HEAD(icom_adapter_head); + +/* spinlock for adapter initialization and changing adapter operations */ +static spinlock_t icom_lock; + +#ifdef ICOM_TRACE +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} +#else +static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; +#endif +static void icom_kref_release(struct kref *kref); + +static void free_port_memory(struct icom_port *icom_port) +{ + struct pci_dev *dev = icom_port->adapter->pci_dev; + + trace(icom_port, "RET_PORT_MEM", 0); + if (icom_port->recv_buf) { + pci_free_consistent(dev, 4096, icom_port->recv_buf, + icom_port->recv_buf_pci); + icom_port->recv_buf = NULL; + } + if (icom_port->xmit_buf) { + pci_free_consistent(dev, 4096, icom_port->xmit_buf, + icom_port->xmit_buf_pci); + icom_port->xmit_buf = NULL; + } + if (icom_port->statStg) { + pci_free_consistent(dev, 4096, icom_port->statStg, + icom_port->statStg_pci); + icom_port->statStg = NULL; + } + + if (icom_port->xmitRestart) { + pci_free_consistent(dev, 4096, icom_port->xmitRestart, + icom_port->xmitRestart_pci); + icom_port->xmitRestart = NULL; + } +} + +static int __devinit get_port_memory(struct icom_port *icom_port) +{ + int index; + unsigned long stgAddr; + unsigned long startStgAddr; + unsigned long offset; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + icom_port->xmit_buf = + pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); + if (!icom_port->xmit_buf) { + dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); + return -ENOMEM; + } + + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->xmit_buf); + + icom_port->recv_buf = + pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); + if (!icom_port->recv_buf) { + dev_err(&dev->dev, "Can not allocate Receive buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->recv_buf); + + icom_port->statStg = + pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); + if (!icom_port->statStg) { + dev_err(&dev->dev, "Can not allocate Status buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->statStg); + + icom_port->xmitRestart = + pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); + if (!icom_port->xmitRestart) { + dev_err(&dev->dev, + "Can not allocate xmit Restart buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + + memset(icom_port->statStg, 0, 4096); + + /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that + indicates that frames are to be transmitted + */ + + stgAddr = (unsigned long) icom_port->statStg; + for (index = 0; index < NUM_XBUFFS; index++) { + trace(icom_port, "FOD_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); + if (index < (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_ADDR", stgAddr); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else if (index == (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + } + } + /* FIDs */ + startStgAddr = stgAddr; + + /* fill in every entry, even if no buffer */ + for (index = 0; index < NUM_RBUFFS; index++) { + trace(icom_port, "FID_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); + icom_port->statStg->rcv[index].leLength = 0; + icom_port->statStg->rcv[index].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + if (index < (NUM_RBUFFS - 1) ) { + offset = stgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci); + } else if (index == (NUM_RBUFFS -1) ) { + offset = startStgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf + 2048); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci + 2048); + } else { + icom_port->statStg->rcv[index].leNext = 0; + icom_port->statStg->rcv[index].leBuffer = 0; + } + } + + return 0; +} + +static void stop_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + stop_proc[port].global_control_reg = &icom_port->global_reg->control; + else + stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; + + + if (port < 4) { + temp = readl(stop_proc[port].global_control_reg); + temp = + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + writel(temp, stop_proc[port].global_control_reg); + + /* write flush */ + readl(stop_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void start_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + start_proc[port].global_control_reg = &icom_port->global_reg->control; + else + start_proc[port].global_control_reg = &icom_port->global_reg->control_2; + if (port < 4) { + temp = readl(start_proc[port].global_control_reg); + temp = + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + writel(temp, start_proc[port].global_control_reg); + + /* write flush */ + readl(start_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void load_code(struct icom_port *icom_port) +{ + const struct firmware *fw; + char __iomem *iram_ptr; + int index; + int status = 0; + void __iomem *dram_ptr = icom_port->dram; + dma_addr_t temp_pci; + unsigned char *new_page = NULL; + unsigned char cable_id = NO_CABLE; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + trace(icom_port, "CLEAR_INTERRUPTS", 0); + + /* Stop processor */ + stop_processor(icom_port); + + /* Zero out DRAM */ + memset_io(dram_ptr, 0, 512); + + /* Load Call Setup into Adapter */ + if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; + for (index = 0; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Load Resident DCE portion of Adapter */ + if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_IRAM_SIZE) { + dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; + for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Set Hardware level */ + if (icom_port->adapter->version == ADAPTER_V2) + writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); + + /* Start the processor in Adapter */ + start_processor(icom_port); + + writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), + &(icom_port->dram->HDLCConfigReg)); + writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0x00, &(icom_port->dram->CmdReg)); + writeb(0x10, &(icom_port->dram->async_config3)); + writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | + ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); + + /*Set up data in icom DRAM to indicate where personality + *code is located and its length. + */ + new_page = pci_alloc_consistent(dev, 4096, &temp_pci); + + if (!new_page) { + dev_err(&dev->dev, "Can not allocate DMA buffer\n"); + status = -1; + goto load_code_exit; + } + + if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + for (index = 0; index < fw->size; index++) + new_page[index] = fw->data[index]; + + release_firmware(fw); + + writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); + writel(temp_pci, &icom_port->dram->mac_load_addr); + + /*Setting the syncReg to 0x80 causes adapter to start downloading + the personality code into adapter instruction RAM. + Once code is loaded, it will begin executing and, based on + information provided above, will start DMAing data from + shared memory to adapter DRAM. + */ + /* the wait loop below verifies this write operation has been done + and processed + */ + writeb(START_DOWNLOAD, &icom_port->dram->sync); + + /* Wait max 1 Sec for data download and processor to start */ + for (index = 0; index < 10; index++) { + msleep(100); + if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) + break; + } + + if (index == 10) + status = -1; + + /* + * check Cable ID + */ + cable_id = readb(&icom_port->dram->cable_id); + + if (cable_id & ICOM_CABLE_ID_VALID) { + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; + icom_port->cable_id = cable_id; + } else { + dev_err(&dev->dev,"Invalid or no cable attached\n"); + icom_port->cable_id = NO_CABLE; + } + + load_code_exit: + + if (status != 0) { + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + /* Turn off port */ + writeb(ICOM_DISABLE, &(icom_port->dram->disable)); + + /* Stop processor */ + stop_processor(icom_port); + + dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); + } + + if (new_page != NULL) + pci_free_consistent(dev, 4096, new_page, temp_pci); +} + +static int startup(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cable_id, raw_cable_id; + unsigned long flags; + int port; + + trace(icom_port, "STARTUP", 0); + + if (!icom_port->dram) { + /* should NEVER be NULL */ + dev_err(&icom_port->adapter->pci_dev->dev, + "Unusable Port, port configuration missing\n"); + return -ENODEV; + } + + /* + * check Cable ID + */ + raw_cable_id = readb(&icom_port->dram->cable_id); + trace(icom_port, "CABLE_ID", raw_cable_id); + + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + + /* Check for valid Cable ID */ + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (cable_id != icom_port->cable_id)) { + + /* reload adapter code, pick up any potential changes in cable id */ + load_code(icom_port); + + /* still no sign of cable, error out */ + raw_cable_id = readb(&icom_port->dram->cable_id); + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (icom_port->cable_id == NO_CABLE)) + return -EIO; + } + + /* + * Finally, clear and enable interrupts + */ + spin_lock_irqsave(&icom_lock, flags); + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port == 0 || port == 2) + writew(0x00FF, icom_port->int_reg); + else + writew(0x3F00, icom_port->int_reg); + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); + return 0; +} + +static void shutdown(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cmdReg; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + trace(icom_port, "SHUTDOWN", 0); + + /* + * disable all interrupts + */ + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + spin_unlock_irqrestore(&icom_lock, flags); + + /* + * disable break condition + */ + cmdReg = readb(&icom_port->dram->CmdReg); + if (cmdReg & CMD_SND_BREAK) { + writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); + } +} + +static int icom_write(struct uart_port *port) +{ + unsigned long data_count; + unsigned char cmdReg; + unsigned long offset; + int temp_tail = port->state->xmit.tail; + + trace(ICOM_PORT, "WRITE", 0); + + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) { + trace(ICOM_PORT, "WRITE_FULL", 0); + return 0; + } + + data_count = 0; + while ((port->state->xmit.head != temp_tail) && + (data_count <= XMIT_BUFF_SZ)) { + + ICOM_PORT->xmit_buf[data_count++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + } + + if (data_count) { + ICOM_PORT->statStg->xmit[0].flags = + cpu_to_le16(SA_FLAGS_READY_TO_XMIT); + ICOM_PORT->statStg->xmit[0].leLength = + cpu_to_le16(data_count); + offset = + (unsigned long) &ICOM_PORT->statStg->xmit[0] - + (unsigned long) ICOM_PORT->statStg; + *ICOM_PORT->xmitRestart = + cpu_to_le32(ICOM_PORT->statStg_pci + offset); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_XMIT_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); + trace(ICOM_PORT, "WRITE_START", data_count); + /* write flush */ + readb(&ICOM_PORT->dram->StartXmitCmd); + } + + return data_count; +} + +static inline void check_modem_status(struct icom_port *icom_port) +{ + static char old_status = 0; + char delta_status; + unsigned char status; + + spin_lock(&icom_port->uart_port.lock); + + /*modem input register */ + status = readb(&icom_port->dram->isr); + trace(icom_port, "CHECK_MODEM", status); + delta_status = status ^ old_status; + if (delta_status) { + if (delta_status & ICOM_RI) + icom_port->uart_port.icount.rng++; + if (delta_status & ICOM_DSR) + icom_port->uart_port.icount.dsr++; + if (delta_status & ICOM_DCD) + uart_handle_dcd_change(&icom_port->uart_port, + delta_status & ICOM_DCD); + if (delta_status & ICOM_CTS) + uart_handle_cts_change(&icom_port->uart_port, + delta_status & ICOM_CTS); + + wake_up_interruptible(&icom_port->uart_port.state-> + port.delta_msr_wait); + old_status = status; + } + spin_unlock(&icom_port->uart_port.lock); +} + +static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + unsigned short int count; + int i; + + if (port_int_reg & (INT_XMIT_COMPLETED)) { + trace(icom_port, "XMIT_COMPLETE", 0); + + /* clear buffer in use bit */ + icom_port->statStg->xmit[0].flags &= + cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); + + count = (unsigned short int) + cpu_to_le16(icom_port->statStg->xmit[0].leLength); + icom_port->uart_port.icount.tx += count; + + for (i=0; iuart_port.state->xmit); i++) { + + icom_port->uart_port.state->xmit.tail++; + icom_port->uart_port.state->xmit.tail &= + (UART_XMIT_SIZE - 1); + } + + if (!icom_write(&icom_port->uart_port)) + /* activate write queue */ + uart_write_wakeup(&icom_port->uart_port); + } else + trace(icom_port, "XMIT_DISABLED", 0); +} + +static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + short int count, rcv_buff; + struct tty_struct *tty = icom_port->uart_port.state->port.tty; + unsigned short int status; + struct uart_icount *icount; + unsigned long offset; + unsigned char flag; + + trace(icom_port, "RCV_COMPLETE", 0); + rcv_buff = icom_port->next_rcv; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + while (status & SA_FL_RCV_DONE) { + int first = -1; + + trace(icom_port, "FID_STATUS", status); + count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); + + trace(icom_port, "RCV_COUNT", count); + + trace(icom_port, "REAL_COUNT", count); + + offset = + cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - + icom_port->recv_buf_pci; + + /* Block copy all but the last byte as this may have status */ + if (count > 0) { + first = icom_port->recv_buf[offset]; + tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1); + } + + icount = &icom_port->uart_port.icount; + icount->rx += count; + + /* Break detect logic */ + if ((status & SA_FLAGS_FRAME_ERROR) + && first == 0) { + status &= ~SA_FLAGS_FRAME_ERROR; + status |= SA_FLAGS_BREAK_DET; + trace(icom_port, "BREAK_DET", 0); + } + + flag = TTY_NORMAL; + + if (status & + (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | + SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { + + if (status & SA_FLAGS_BREAK_DET) + icount->brk++; + if (status & SA_FLAGS_PARITY_ERROR) + icount->parity++; + if (status & SA_FLAGS_FRAME_ERROR) + icount->frame++; + if (status & SA_FLAGS_OVERRUN) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & icom_port->ignore_status_mask) { + trace(icom_port, "IGNORE_CHAR", 0); + goto ignore_char; + } + + status &= icom_port->read_status_mask; + + if (status & SA_FLAGS_BREAK_DET) { + flag = TTY_BREAK; + } else if (status & SA_FLAGS_PARITY_ERROR) { + trace(icom_port, "PARITY_ERROR", 0); + flag = TTY_PARITY; + } else if (status & SA_FLAGS_FRAME_ERROR) + flag = TTY_FRAME; + + } + + tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); + + if (status & SA_FLAGS_OVERRUN) + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +ignore_char: + icom_port->statStg->rcv[rcv_buff].flags = 0; + icom_port->statStg->rcv[rcv_buff].leLength = 0; + icom_port->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + + rcv_buff++; + if (rcv_buff == NUM_RBUFFS) + rcv_buff = 0; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + } + icom_port->next_rcv = rcv_buff; + tty_flip_buffer_push(tty); +} + +static void process_interrupt(u16 port_int_reg, + struct icom_port *icom_port) +{ + + spin_lock(&icom_port->uart_port.lock); + trace(icom_port, "INTERRUPT", port_int_reg); + + if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) + xmit_interrupt(port_int_reg, icom_port); + + if (port_int_reg & INT_RCV_COMPLETED) + recv_interrupt(port_int_reg, icom_port); + + spin_unlock(&icom_port->uart_port.lock); +} + +static irqreturn_t icom_interrupt(int irq, void *dev_id) +{ + void __iomem * int_reg; + u32 adapter_interrupts; + u16 port_int_reg; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + /* find icom_port for this interrupt */ + icom_adapter = (struct icom_adapter *) dev_id; + + if (icom_adapter->version == ADAPTER_V2) { + int_reg = icom_adapter->base_addr + 0x8024; + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ + icom_port = &icom_adapter->port_info[2]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 3 interrupt */ + icom_port = &icom_adapter->port_info[3]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = + (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + int_reg = icom_adapter->base_addr + 0x8004; + } else { + int_reg = icom_adapter->base_addr + 0x4004; + } + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ + icom_port = &icom_adapter->port_info[0]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 1 interrupt */ + icom_port = &icom_adapter->port_info[1]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + /* flush the write */ + adapter_interrupts = readl(int_reg); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------ + * Begin serial-core API + * ------------------------------------------------------------------ + */ +static unsigned int icom_tx_empty(struct uart_port *port) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) + ret = TIOCSER_TEMT; + else + ret = 0; + + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char local_osr; + + trace(ICOM_PORT, "SET_MODEM", 0); + local_osr = readb(&ICOM_PORT->dram->osr); + + if (mctrl & TIOCM_RTS) { + trace(ICOM_PORT, "RAISE_RTS", 0); + local_osr |= ICOM_RTS; + } else { + trace(ICOM_PORT, "LOWER_RTS", 0); + local_osr &= ~ICOM_RTS; + } + + if (mctrl & TIOCM_DTR) { + trace(ICOM_PORT, "RAISE_DTR", 0); + local_osr |= ICOM_DTR; + } else { + trace(ICOM_PORT, "LOWER_DTR", 0); + local_osr &= ~ICOM_DTR; + } + + writeb(local_osr, &ICOM_PORT->dram->osr); +} + +static unsigned int icom_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int result; + + trace(ICOM_PORT, "GET_MODEM", 0); + + status = readb(&ICOM_PORT->dram->isr); + + result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) + | ((status & ICOM_RI) ? TIOCM_RNG : 0) + | ((status & ICOM_DSR) ? TIOCM_DSR : 0) + | ((status & ICOM_CTS) ? TIOCM_CTS : 0); + return result; +} + +static void icom_stop_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "STOP", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); +} + +static void icom_start_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "START", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) + writeb(cmdReg & ~CMD_HOLD_XMIT, + &ICOM_PORT->dram->CmdReg); + + icom_write(port); +} + +static void icom_send_xchar(struct uart_port *port, char ch) +{ + unsigned char xdata; + int index; + unsigned long flags; + + trace(ICOM_PORT, "SEND_XCHAR", ch); + + /* wait .1 sec to send char */ + for (index = 0; index < 10; index++) { + spin_lock_irqsave(&port->lock, flags); + xdata = readb(&ICOM_PORT->dram->xchar); + if (xdata == 0x00) { + trace(ICOM_PORT, "QUICK_WRITE", 0); + writeb(ch, &ICOM_PORT->dram->xchar); + + /* flush write operation */ + xdata = readb(&ICOM_PORT->dram->xchar); + spin_unlock_irqrestore(&port->lock, flags); + break; + } + spin_unlock_irqrestore(&port->lock, flags); + msleep(10); + } +} + +static void icom_stop_rx(struct uart_port *port) +{ + unsigned char cmdReg; + + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); +} + +static void icom_enable_ms(struct uart_port *port) +{ + /* no-op */ +} + +static void icom_break(struct uart_port *port, int break_state) +{ + unsigned char cmdReg; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "BREAK", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if (break_state == -1) { + writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } else { + writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static int icom_open(struct uart_port *port) +{ + int retval; + + kref_get(&ICOM_PORT->adapter->kref); + retval = startup(ICOM_PORT); + + if (retval) { + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); + trace(ICOM_PORT, "STARTUP_ERROR", 0); + return retval; + } + + return 0; +} + +static void icom_close(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "CLOSE", 0); + + /* stop receiver */ + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + + shutdown(ICOM_PORT); + + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); +} + +static void icom_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + int baud; + unsigned cflag, iflag; + char new_config2; + char new_config3 = 0; + char tmp_byte; + int index; + int rcv_buff, xmit_buff; + unsigned long offset; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "CHANGE_SPEED", 0); + + cflag = termios->c_cflag; + iflag = termios->c_iflag; + + new_config2 = ICOM_ACFG_DRIVE1; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: /* 5 bits/char */ + new_config2 |= ICOM_ACFG_5BPC; + break; + case CS6: /* 6 bits/char */ + new_config2 |= ICOM_ACFG_6BPC; + break; + case CS7: /* 7 bits/char */ + new_config2 |= ICOM_ACFG_7BPC; + break; + case CS8: /* 8 bits/char */ + new_config2 |= ICOM_ACFG_8BPC; + break; + default: + break; + } + if (cflag & CSTOPB) { + /* 2 stop bits */ + new_config2 |= ICOM_ACFG_2STOP_BIT; + } + if (cflag & PARENB) { + /* parity bit enabled */ + new_config2 |= ICOM_ACFG_PARITY_ENAB; + trace(ICOM_PORT, "PARENB", 0); + } + if (cflag & PARODD) { + /* odd parity */ + new_config2 |= ICOM_ACFG_PARITY_ODD; + trace(ICOM_PORT, "PARODD", 0); + } + + /* Determine divisor based on baud rate */ + baud = uart_get_baud_rate(port, termios, old_termios, + icom_acfg_baud[0], + icom_acfg_baud[BAUD_TABLE_LIMIT]); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + + for (index = 0; index < BAUD_TABLE_LIMIT; index++) { + if (icom_acfg_baud[index] == baud) { + new_config3 = index; + break; + } + } + + uart_update_timeout(port, cflag, baud); + + /* CTS flow control flag and modem status interrupts */ + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + if (cflag & CRTSCTS) + tmp_byte |= HDLC_HDW_FLOW; + else + tmp_byte &= ~HDLC_HDW_FLOW; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + + /* + * Set up parity check flag + */ + ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; + if (iflag & INPCK) + ICOM_PORT->read_status_mask |= + SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; + + if ((iflag & BRKINT) || (iflag & PARMRK)) + ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; + + /* + * Characters to ignore + */ + ICOM_PORT->ignore_status_mask = 0; + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= + SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; + if (iflag & IGNBRK) { + ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; + } + + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; + + /* Turn off Receiver to prepare for reset */ + writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { + break; + } + } + + /* clear all current buffers of data */ + for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { + ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; + ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; + ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + } + + for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { + ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; + } + + /* activate changes and start xmit and receiver here */ + /* Enable the receiver */ + writeb(new_config3, &(ICOM_PORT->dram->async_config3)); + writeb(new_config2, &(ICOM_PORT->dram->async_config2)); + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ + + /* reset processor */ + writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { + break; + } + } + + /* Enable Transmitter and Reciever */ + offset = + (unsigned long) &ICOM_PORT->statStg->rcv[0] - + (unsigned long) ICOM_PORT->statStg; + writel(ICOM_PORT->statStg_pci + offset, + &ICOM_PORT->dram->RcvStatusAddr); + ICOM_PORT->next_rcv = 0; + ICOM_PORT->put_length = 0; + *ICOM_PORT->xmitRestart = 0; + writel(ICOM_PORT->xmitRestart_pci, + &ICOM_PORT->dram->XmitStatusAddr); + trace(ICOM_PORT, "XR_ENAB", 0); + writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *icom_type(struct uart_port *port) +{ + return "icom"; +} + +static void icom_release_port(struct uart_port *port) +{ +} + +static int icom_request_port(struct uart_port *port) +{ + return 0; +} + +static void icom_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ICOM; +} + +static struct uart_ops icom_ops = { + .tx_empty = icom_tx_empty, + .set_mctrl = icom_set_mctrl, + .get_mctrl = icom_get_mctrl, + .stop_tx = icom_stop_tx, + .start_tx = icom_start_tx, + .send_xchar = icom_send_xchar, + .stop_rx = icom_stop_rx, + .enable_ms = icom_enable_ms, + .break_ctl = icom_break, + .startup = icom_open, + .shutdown = icom_close, + .set_termios = icom_set_termios, + .type = icom_type, + .release_port = icom_release_port, + .request_port = icom_request_port, + .config_port = icom_config_port, +}; + +#define ICOM_CONSOLE NULL + +static struct uart_driver icom_uart_driver = { + .owner = THIS_MODULE, + .driver_name = ICOM_DRIVER_NAME, + .dev_name = "ttyA", + .major = ICOM_MAJOR, + .minor = ICOM_MINOR_START, + .nr = NR_PORTS, + .cons = ICOM_CONSOLE, +}; + +static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) +{ + u32 subsystem_id = icom_adapter->subsystem_id; + int i; + struct icom_port *icom_port; + + if (icom_adapter->version == ADAPTER_V1) { + icom_adapter->numb_ports = 2; + + for (i = 0; i < 2; i++) { + icom_port = &icom_adapter->port_info[i]; + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_UNKNOWN; + } + } else { + if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { + icom_adapter->numb_ports = 4; + + for (i = 0; i < 4; i++) { + icom_port = &icom_adapter->port_info[i]; + + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_IMBED_MODEM; + } + } else { + icom_adapter->numb_ports = 4; + + icom_adapter->port_info[0].port = 0; + icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; + + if (subsystem_id == + PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { + icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; + } else { + icom_adapter->port_info[0].imbed_modem = ICOM_RVX; + } + + icom_adapter->port_info[1].status = ICOM_PORT_OFF; + + icom_adapter->port_info[2].port = 2; + icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; + icom_adapter->port_info[2].imbed_modem = ICOM_RVX; + icom_adapter->port_info[3].status = ICOM_PORT_OFF; + } + } + + return 0; +} + +static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) +{ + if (icom_adapter->version == ADAPTER_V1) { + icom_port->global_reg = icom_adapter->base_addr + 0x4000; + icom_port->int_reg = icom_adapter->base_addr + + 0x4004 + 2 - 2 * port_num; + } else { + icom_port->global_reg = icom_adapter->base_addr + 0x8000; + if (icom_port->port < 2) + icom_port->int_reg = icom_adapter->base_addr + + 0x8004 + 2 - 2 * icom_port->port; + else + icom_port->int_reg = icom_adapter->base_addr + + 0x8024 + 2 - 2 * (icom_port->port - 2); + } +} +static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int port_num; + + for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { + + icom_port = &icom_adapter->port_info[port_num]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port_active(icom_port, icom_adapter, port_num); + icom_port->dram = icom_adapter->base_addr + + 0x2000 * icom_port->port; + + icom_port->adapter = icom_adapter; + + /* get port memory */ + if (get_port_memory(icom_port) != 0) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Memory allocation for port FAILED\n"); + } + } + } + return 0; +} + +static int __devinit icom_alloc_adapter(struct icom_adapter + **icom_adapter_ref) +{ + int adapter_count = 0; + struct icom_adapter *icom_adapter; + struct icom_adapter *cur_adapter_entry; + struct list_head *tmp; + + icom_adapter = (struct icom_adapter *) + kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); + + if (!icom_adapter) { + return -ENOMEM; + } + + list_for_each(tmp, &icom_adapter_head) { + cur_adapter_entry = + list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (cur_adapter_entry->index != adapter_count) { + break; + } + adapter_count++; + } + + icom_adapter->index = adapter_count; + list_add_tail(&icom_adapter->icom_adapter_entry, tmp); + + *icom_adapter_ref = icom_adapter; + return 0; +} + +static void icom_free_adapter(struct icom_adapter *icom_adapter) +{ + list_del(&icom_adapter->icom_adapter_entry); + kfree(icom_adapter); +} + +static void icom_remove_adapter(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int index; + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + dev_info(&icom_adapter->pci_dev->dev, + "Device removed\n"); + + uart_remove_one_port(&icom_uart_driver, + &icom_port->uart_port); + + /* be sure that DTR and RTS are dropped */ + writeb(0x00, &icom_port->dram->osr); + + /* Wait 0.1 Sec for simple Init to complete */ + msleep(100); + + /* Stop proccessor */ + stop_processor(icom_port); + + free_port_memory(icom_port); + } + } + + free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); + iounmap(icom_adapter->base_addr); + pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); +} + +static void icom_kref_release(struct kref *kref) +{ + struct icom_adapter *icom_adapter; + + icom_adapter = to_icom_adapter(kref); + icom_remove_adapter(icom_adapter); +} + +static int __devinit icom_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int index; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + retval = pci_enable_device(dev); + if (retval) { + dev_err(&dev->dev, "Device enable FAILED\n"); + return retval; + } + + if ( (retval = pci_request_regions(dev, "icom"))) { + dev_err(&dev->dev, "pci_request_regions FAILED\n"); + pci_disable_device(dev); + return retval; + } + + pci_set_master(dev); + + if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + dev_err(&dev->dev, "PCI Config read FAILED\n"); + return retval; + } + + pci_write_config_dword(dev, PCI_COMMAND, + command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + if (ent->driver_data == ADAPTER_V1) { + pci_write_config_dword(dev, 0x44, 0x8300830A); + } else { + pci_write_config_dword(dev, 0x44, 0x42004200); + pci_write_config_dword(dev, 0x48, 0x42004200); + } + + + retval = icom_alloc_adapter(&icom_adapter); + if (retval) { + dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); + retval = -EIO; + goto probe_exit0; + } + + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; + + + retval = icom_init_ports(icom_adapter); + if (retval) { + dev_err(&dev->dev, "Port configuration failed\n"); + goto probe_exit1; + } + + icom_adapter->base_addr = pci_ioremap_bar(dev, 0); + + if (!icom_adapter->base_addr) + goto probe_exit1; + + /* save off irq and request irq line */ + if ( (retval = request_irq(dev->irq, icom_interrupt, + IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME, + (void *) icom_adapter))) { + goto probe_exit2; + } + + retval = icom_load_ports(icom_adapter); + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; + icom_port->uart_port.type = PORT_ICOM; + icom_port->uart_port.iotype = UPIO_MEM; + icom_port->uart_port.membase = + (char *) icom_adapter->base_addr_pci; + icom_port->uart_port.fifosize = 16; + icom_port->uart_port.ops = &icom_ops; + icom_port->uart_port.line = + icom_port->port + icom_adapter->index * 4; + if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { + icom_port->status = ICOM_PORT_OFF; + dev_err(&dev->dev, "Device add failed\n"); + } else + dev_info(&dev->dev, "Device added\n"); + } + } + + kref_init(&icom_adapter->kref); + return 0; + +probe_exit2: + iounmap(icom_adapter->base_addr); +probe_exit1: + icom_free_adapter(icom_adapter); + +probe_exit0: + pci_release_regions(dev); + pci_disable_device(dev); + + return retval; +} + +static void __devexit icom_remove(struct pci_dev *dev) +{ + struct icom_adapter *icom_adapter; + struct list_head *tmp; + + list_for_each(tmp, &icom_adapter_head) { + icom_adapter = list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (icom_adapter->pci_dev == dev) { + kref_put(&icom_adapter->kref, icom_kref_release); + return; + } + } + + dev_err(&dev->dev, "Unable to find device to remove\n"); +} + +static struct pci_driver icom_pci_driver = { + .name = ICOM_DRIVER_NAME, + .id_table = icom_pci_table, + .probe = icom_probe, + .remove = __devexit_p(icom_remove), +}; + +static int __init icom_init(void) +{ + int ret; + + spin_lock_init(&icom_lock); + + ret = uart_register_driver(&icom_uart_driver); + if (ret) + return ret; + + ret = pci_register_driver(&icom_pci_driver); + + if (ret < 0) + uart_unregister_driver(&icom_uart_driver); + + return ret; +} + +static void __exit icom_exit(void) +{ + pci_unregister_driver(&icom_pci_driver); + uart_unregister_driver(&icom_uart_driver); +} + +module_init(icom_init); +module_exit(icom_exit); + +MODULE_AUTHOR("Michael Anderson "); +MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); +MODULE_SUPPORTED_DEVICE + ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("icom_call_setup.bin"); +MODULE_FIRMWARE("icom_res_dce.bin"); +MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h new file mode 100644 index 0000000..c8029e0 --- /dev/null +++ b/drivers/tty/serial/icom.h @@ -0,0 +1,287 @@ +/* + * icom.h + * + * Copyright (C) 2001 Michael Anderson, IBM Corporation + * + * Serial device driver include file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) +static int icom_acfg_baud[] = { + 300, + 600, + 900, + 1200, + 1800, + 2400, + 3600, + 4800, + 7200, + 9600, + 14400, + 19200, + 28800, + 38400, + 57600, + 76800, + 115200, + 153600, + 230400, + 307200, + 460800, +}; + +struct icom_regs { + u32 control; /* Adapter Control Register */ + u32 interrupt; /* Adapter Interrupt Register */ + u32 int_mask; /* Adapter Interrupt Mask Reg */ + u32 int_pri; /* Adapter Interrupt Priority r */ + u32 int_reg_b; /* Adapter non-masked Interrupt */ + u32 resvd01; + u32 resvd02; + u32 resvd03; + u32 control_2; /* Adapter Control Register 2 */ + u32 interrupt_2; /* Adapter Interrupt Register 2 */ + u32 int_mask_2; /* Adapter Interrupt Mask 2 */ + u32 int_pri_2; /* Adapter Interrupt Prior 2 */ + u32 int_reg_2b; /* Adapter non-masked 2 */ +}; + +struct func_dram { + u32 reserved[108]; /* 0-1B0 reserved by personality code */ + u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ + u8 RcvStnAddr; /* 1B4 Receive Station Addr */ + u8 IdleState; /* 1B5 Idle State */ + u8 IdleMonitor; /* 1B6 Idle Monitor */ + u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ + u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ + u8 StartXmitCmd; /* 1BC Start Xmit Command */ + u8 HDLCConfigReg; /* 1BD Reserved */ + u8 CauseCode; /* 1BE Cause code for fatal error */ + u8 xchar; /* 1BF High priority send */ + u32 reserved3; /* 1C0-1C3 Reserved */ + u8 PrevCmdReg; /* 1C4 Reserved */ + u8 CmdReg; /* 1C5 Command Register */ + u8 async_config2; /* 1C6 Async Config Byte 2 */ + u8 async_config3; /* 1C7 Async Config Byte 3 */ + u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ + u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ + u8 misc_flags; /* 1DD misc flags */ +#define V2_HARDWARE 0x40 +#define ICOM_HDW_ACTIVE 0x01 + u8 call_length; /* 1DE Phone #/CFI buff ln */ + u8 call_length2; /* 1DF Upper byte (unused) */ + u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ + u16 timer_value; /* 1E4-1E5 general timer value */ + u8 timer_command; /* 1E6 general timer cmd */ + u8 dce_command; /* 1E7 dce command reg */ + u8 dce_cmd_status; /* 1E8 dce command stat */ + u8 x21_r1_ioff; /* 1E9 dce ready counter */ + u8 x21_r0_ioff; /* 1EA dce not ready ctr */ + u8 x21_ralt_ioff; /* 1EB dce CNR counter */ + u8 x21_r1_ion; /* 1EC dce ready I on ctr */ + u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ + u8 ier; /* 1EE Interrupt Enable */ + u8 isr; /* 1EF Input Signal Reg */ + u8 osr; /* 1F0 Output Signal Reg */ + u8 reset; /* 1F1 Reset/Reload Reg */ + u8 disable; /* 1F2 Disable Reg */ + u8 sync; /* 1F3 Sync Reg */ + u8 error_stat; /* 1F4 Error Status */ + u8 cable_id; /* 1F5 Cable ID */ + u8 cs_length; /* 1F6 CS Load Length */ + u8 mac_length; /* 1F7 Mac Load Length */ + u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ + u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ +}; + +/* + * adapter defines and structures + */ +#define ICOM_CONTROL_START_A 0x00000008 +#define ICOM_CONTROL_STOP_A 0x00000004 +#define ICOM_CONTROL_START_B 0x00000002 +#define ICOM_CONTROL_STOP_B 0x00000001 +#define ICOM_CONTROL_START_C 0x00000008 +#define ICOM_CONTROL_STOP_C 0x00000004 +#define ICOM_CONTROL_START_D 0x00000002 +#define ICOM_CONTROL_STOP_D 0x00000001 +#define ICOM_IRAM_OFFSET 0x1000 +#define ICOM_IRAM_SIZE 0x0C00 +#define ICOM_DCE_IRAM_OFFSET 0x0A00 +#define ICOM_CABLE_ID_VALID 0x01 +#define ICOM_CABLE_ID_MASK 0xF0 +#define ICOM_DISABLE 0x80 +#define CMD_XMIT_RCV_ENABLE 0xC0 +#define CMD_XMIT_ENABLE 0x40 +#define CMD_RCV_DISABLE 0x00 +#define CMD_RCV_ENABLE 0x80 +#define CMD_RESTART 0x01 +#define CMD_HOLD_XMIT 0x02 +#define CMD_SND_BREAK 0x04 +#define RS232_CABLE 0x06 +#define V24_CABLE 0x0E +#define V35_CABLE 0x0C +#define V36_CABLE 0x02 +#define NO_CABLE 0x00 +#define START_DOWNLOAD 0x80 +#define ICOM_INT_MASK_PRC_A 0x00003FFF +#define ICOM_INT_MASK_PRC_B 0x3FFF0000 +#define ICOM_INT_MASK_PRC_C 0x00003FFF +#define ICOM_INT_MASK_PRC_D 0x3FFF0000 +#define INT_RCV_COMPLETED 0x1000 +#define INT_XMIT_COMPLETED 0x2000 +#define INT_IDLE_DETECT 0x0800 +#define INT_RCV_DISABLED 0x0400 +#define INT_XMIT_DISABLED 0x0200 +#define INT_RCV_XMIT_SHUTDOWN 0x0100 +#define INT_FATAL_ERROR 0x0080 +#define INT_CABLE_PULL 0x0020 +#define INT_SIGNAL_CHANGE 0x0010 +#define HDLC_PPP_PURE_ASYNC 0x02 +#define HDLC_FF_FILL 0x00 +#define HDLC_HDW_FLOW 0x01 +#define START_XMIT 0x80 +#define ICOM_ACFG_DRIVE1 0x20 +#define ICOM_ACFG_NO_PARITY 0x00 +#define ICOM_ACFG_PARITY_ENAB 0x02 +#define ICOM_ACFG_PARITY_ODD 0x01 +#define ICOM_ACFG_8BPC 0x00 +#define ICOM_ACFG_7BPC 0x04 +#define ICOM_ACFG_6BPC 0x08 +#define ICOM_ACFG_5BPC 0x0C +#define ICOM_ACFG_1STOP_BIT 0x00 +#define ICOM_ACFG_2STOP_BIT 0x10 +#define ICOM_DTR 0x80 +#define ICOM_RTS 0x40 +#define ICOM_RI 0x08 +#define ICOM_DSR 0x80 +#define ICOM_DCD 0x20 +#define ICOM_CTS 0x40 + +#define NUM_XBUFFS 1 +#define NUM_RBUFFS 2 +#define RCV_BUFF_SZ 0x0200 +#define XMIT_BUFF_SZ 0x1000 +struct statusArea { + /**********************************************/ + /* Transmit Status Area */ + /**********************************************/ + struct xmit_status_area{ + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 leLengthASD; + u16 leOffsetASD; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ +#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ +#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ +#define SA_FLAGS_READY_TO_XMIT 0x0800 +#define SA_FLAGS_STAT_MASK 0x007F + } xmit[NUM_XBUFFS]; + + /**********************************************/ + /* Receive Status Area */ + /**********************************************/ + struct { + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 WorkingLength; /* size of segment */ + u16 reserv01; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FL_RCV_DONE 0x0010 /* Data ready */ +#define SA_FLAGS_OVERRUN 0x0040 +#define SA_FLAGS_PARITY_ERROR 0x0080 +#define SA_FLAGS_FRAME_ERROR 0x0001 +#define SA_FLAGS_FRAME_TRUNC 0x0002 +#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ +#define SA_FLAGS_RCV_MASK 0xFFE6 + } rcv[NUM_RBUFFS]; +}; + +struct icom_adapter; + + +#define ICOM_MAJOR 243 +#define ICOM_MINOR_START 0 + +struct icom_port { + struct uart_port uart_port; + u8 imbed_modem; +#define ICOM_UNKNOWN 1 +#define ICOM_RVX 2 +#define ICOM_IMBED_MODEM 3 + unsigned char cable_id; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + void __iomem * int_reg; + struct icom_regs __iomem *global_reg; + struct func_dram __iomem *dram; + int port; + struct statusArea *statStg; + dma_addr_t statStg_pci; + u32 *xmitRestart; + dma_addr_t xmitRestart_pci; + unsigned char *xmit_buf; + dma_addr_t xmit_buf_pci; + unsigned char *recv_buf; + dma_addr_t recv_buf_pci; + int next_rcv; + int put_length; + int status; +#define ICOM_PORT_ACTIVE 1 /* Port exists. */ +#define ICOM_PORT_OFF 0 /* Port does not exist. */ + int load_in_progress; + struct icom_adapter *adapter; +}; + +struct icom_adapter { + void __iomem * base_addr; + unsigned long base_addr_pci; + struct pci_dev *pci_dev; + struct icom_port port_info[4]; + int index; + int version; +#define ADAPTER_V1 0x0001 +#define ADAPTER_V2 0x0002 + u32 subsystem_id; +#define FOUR_PORT_MODEL 0x0252 +#define V2_TWO_PORTS_RVX 0x021A +#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 + int numb_ports; + struct list_head icom_adapter_entry; + struct kref kref; +}; + +/* prototype */ +extern void iCom_sercons_init(void); + +struct lookup_proc_table { + u32 __iomem *global_control_reg; + unsigned long processor_id; +}; + +struct lookup_int_table { + u32 __iomem *global_int_mask; + unsigned long processor_id; +}; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c new file mode 100644 index 0000000..ab93763 --- /dev/null +++ b/drivers/tty/serial/ifx6x60.c @@ -0,0 +1,1406 @@ +/**************************************************************************** + * + * Driver for the IFX 6x60 spi modem. + * + * Copyright (C) 2008 Option International + * Copyright (C) 2008 Filip Aben + * Denis Joseph Barrow + * Jan Dumon + * + * Copyright (C) 2009, 2010 Intel Corp + * Russ Gorby + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA + * + * Driver modified by Intel from Option gtm501l_spi.c + * + * Notes + * o The driver currently assumes a single device only. If you need to + * change this then look for saved_ifx_dev and add a device lookup + * o The driver is intended to be big-endian safe but has never been + * tested that way (no suitable hardware). There are a couple of FIXME + * notes by areas that may need addressing + * o Some of the GPIO naming/setup assumptions may need revisiting if + * you need to use this driver for another platform. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ifx6x60.h" + +#define IFX_SPI_MORE_MASK 0x10 +#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ +#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_TTY_ID 0 +#define IFX_SPI_TIMEOUT_SEC 2 +#define IFX_SPI_HEADER_0 (-1) +#define IFX_SPI_HEADER_F (-2) + +/* forward reference */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); + +/* local variables */ +static int spi_b16 = 1; /* 8 or 16 bit word length */ +static struct tty_driver *tty_drv; +static struct ifx_spi_device *saved_ifx_dev; +static struct lock_class_key ifx_spi_key; + +/* GPIO/GPE settings */ + +/** + * mrdy_set_high - set MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_high(struct ifx_spi_device *ifx) +{ + gpio_set_value(ifx->gpio.mrdy, 1); +} + +/** + * mrdy_set_low - clear MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_low(struct ifx_spi_device *ifx) +{ + gpio_set_value(ifx->gpio.mrdy, 0); +} + +/** + * ifx_spi_power_state_set + * @ifx_dev: our SPI device + * @val: bits to set + * + * Set bit in power status and signal power system if status becomes non-0 + */ +static void +ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + /* + * if power status is already non-0, just update, else + * tell power system + */ + if (!ifx_dev->power_status) + pm_runtime_get(&ifx_dev->spi_dev->dev); + ifx_dev->power_status |= val; + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * ifx_spi_power_state_clear - clear power bit + * @ifx_dev: our SPI device + * @val: bits to clear + * + * clear bit in power status and signal power system if status becomes 0 + */ +static void +ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + if (ifx_dev->power_status) { + ifx_dev->power_status &= ~val; + if (!ifx_dev->power_status) + pm_runtime_put(&ifx_dev->spi_dev->dev); + } + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * swap_buf + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf(u16 *buf, int len, void *end) +{ + int n; + + len = ((len + 1) >> 1); + if ((void *)&buf[len] > end) { + pr_err("swap_buf: swap exceeds boundary (%p > %p)!", + &buf[len], end); + return; + } + for (n = 0; n < len; n++) { + *buf = cpu_to_be16(*buf); + buf++; + } +} + +/** + * mrdy_assert - assert MRDY line + * @ifx_dev: our SPI device + * + * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low + * now. + * + * FIXME: Can SRDY even go high as we are running this code ? + */ +static void mrdy_assert(struct ifx_spi_device *ifx_dev) +{ + int val = gpio_get_value(ifx_dev->gpio.srdy); + if (!val) { + if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, + &ifx_dev->flags)) { + ifx_dev->spi_timer.expires = + jiffies + IFX_SPI_TIMEOUT_SEC*HZ; + add_timer(&ifx_dev->spi_timer); + + } + } + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); + mrdy_set_high(ifx_dev); +} + +/** + * ifx_spi_hangup - hang up an IFX device + * @ifx_dev: our SPI device + * + * Hang up the tty attached to the IFX device if one is currently + * open. If not take no action + */ +static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) +{ + struct tty_port *pport = &ifx_dev->tty_port; + struct tty_struct *tty = tty_port_tty_get(pport); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } +} + +/** + * ifx_spi_timeout - SPI timeout + * @arg: our SPI device + * + * The SPI has timed out: hang up the tty. Users will then see a hangup + * and error events. + */ +static void ifx_spi_timeout(unsigned long arg) +{ + struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; + + dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); + ifx_spi_ttyhangup(ifx_dev); + mrdy_set_low(ifx_dev); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); +} + +/* char/tty operations */ + +/** + * ifx_spi_tiocmget - get modem lines + * @tty: our tty device + * @filp: file handle issuing the request + * + * Map the signal state into Linux modem flags and report the value + * in Linux terms + */ +static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) +{ + unsigned int value; + struct ifx_spi_device *ifx_dev = tty->driver_data; + + value = + (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | + (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | + (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | + (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | + (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | + (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); + return value; +} + +/** + * ifx_spi_tiocmset - set modem bits + * @tty: the tty structure + * @filp: file handle issuing the request + * @set: bits to set + * @clear: bits to clear + * + * The IFX6x60 only supports DTR and RTS. Set them accordingly + * and flag that an update to the modem is needed. + * + * FIXME: do we need to kick the tranfers when we do this ? + */ +static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, + unsigned int set, unsigned int clear) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + + if (set & TIOCM_RTS) + set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (set & TIOCM_DTR) + set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + if (clear & TIOCM_RTS) + clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (clear & TIOCM_DTR) + clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + + set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); + return 0; +} + +/** + * ifx_spi_open - called on tty open + * @tty: our tty device + * @filp: file handle being associated with the tty + * + * Open the tty interface. We let the tty_port layer do all the work + * for us. + * + * FIXME: Remove single device assumption and saved_ifx_dev + */ +static int ifx_spi_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); +} + +/** + * ifx_spi_close - called when our tty closes + * @tty: the tty being closed + * @filp: the file handle being closed + * + * Perform the close of the tty. We use the tty_port layer to do all + * our hard work. + */ +static void ifx_spi_close(struct tty_struct *tty, struct file *filp) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_close(&ifx_dev->tty_port, tty, filp); + /* FIXME: should we do an ifx_spi_reset here ? */ +} + +/** + * ifx_decode_spi_header - decode received header + * @buffer: the received data + * @length: decoded length + * @more: decoded more flag + * @received_cts: status of cts we received + * + * Note how received_cts is handled -- if header is all F it is left + * the same as it was, if header is all 0 it is set to 0 otherwise it is + * taken from the incoming header. + * + * FIXME: endianness + */ +static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, + unsigned char *more, unsigned char *received_cts) +{ + u16 h1; + u16 h2; + u16 *in_buffer = (u16 *)buffer; + + h1 = *in_buffer; + h2 = *(in_buffer+1); + + if (h1 == 0 && h2 == 0) { + *received_cts = 0; + return IFX_SPI_HEADER_0; + } else if (h1 == 0xffff && h2 == 0xffff) { + /* spi_slave_cts remains as it was */ + return IFX_SPI_HEADER_F; + } + + *length = h1 & 0xfff; /* upper bits of byte are flags */ + *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; + *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; + return 0; +} + +/** + * ifx_setup_spi_header - set header fields + * @txbuffer: pointer to start of SPI buffer + * @tx_count: bytes + * @more: indicate if more to follow + * + * Format up an SPI header for a transfer + * + * FIXME: endianness? + */ +static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, + unsigned char more) +{ + *(u16 *)(txbuffer) = tx_count; + *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; + txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; +} + +/** + * ifx_spi_wakeup_serial - SPI space made + * @port_data: our SPI device + * + * We have emptied the FIFO enough that we want to get more data + * queued into it. Poke the line discipline via tty_wakeup so that + * it will feed us more bits + */ +static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) +{ + struct tty_struct *tty; + + tty = tty_port_tty_get(&ifx_dev->tty_port); + if (!tty) + return; + tty_wakeup(tty); + tty_kref_put(tty); +} + +/** + * ifx_spi_prepare_tx_buffer - prepare transmit frame + * @ifx_dev: our SPI device + * + * The transmit buffr needs a header and various other bits of + * information followed by as much data as we can pull from the FIFO + * and transfer. This function formats up a suitable buffer in the + * ifx_dev->tx_buffer + * + * FIXME: performance - should we wake the tty when the queue is half + * empty ? + */ +static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) +{ + int temp_count; + int queue_length; + int tx_count; + unsigned char *tx_buffer; + + tx_buffer = ifx_dev->tx_buffer; + memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE); + + /* make room for required SPI header */ + tx_buffer += IFX_SPI_HEADER_OVERHEAD; + tx_count = IFX_SPI_HEADER_OVERHEAD; + + /* clear to signal no more data if this turns out to be the + * last buffer sent in a sequence */ + ifx_dev->spi_more = 0; + + /* if modem cts is set, just send empty buffer */ + if (!ifx_dev->spi_slave_cts) { + /* see if there's tx data */ + queue_length = kfifo_len(&ifx_dev->tx_fifo); + if (queue_length != 0) { + /* data to mux -- see if there's room for it */ + temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); + temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, + tx_buffer, temp_count, + &ifx_dev->fifo_lock); + + /* update buffer pointer and data count in message */ + tx_buffer += temp_count; + tx_count += temp_count; + if (temp_count == queue_length) + /* poke port to get more data */ + ifx_spi_wakeup_serial(ifx_dev); + else /* more data in port, use next SPI message */ + ifx_dev->spi_more = 1; + } + } + /* have data and info for header -- set up SPI header in buffer */ + /* spi header needs payload size, not entire buffer size */ + ifx_spi_setup_spi_header(ifx_dev->tx_buffer, + tx_count-IFX_SPI_HEADER_OVERHEAD, + ifx_dev->spi_more); + /* swap actual data in the buffer */ + swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, + &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); + return tx_count; +} + +/** + * ifx_spi_write - line discipline write + * @tty: our tty device + * @buf: pointer to buffer to write (kernel space) + * @count: size of buffer + * + * Write the characters we have been given into the FIFO. If the device + * is not active then activate it, when the SRDY line is asserted back + * this will commence I/O + */ +static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + unsigned char *tmp_buf = (unsigned char *)buf; + int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, + &ifx_dev->fifo_lock); + mrdy_assert(ifx_dev); + return tx_count; +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how much data we can accept before we drop bytes. As we use + * a simple FIFO this is nice and easy. + */ +static int ifx_spi_write_room(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how many characters we have buffered. In our case this is the + * number of bytes sitting in our transmit FIFO. + */ +static int ifx_spi_chars_in_buffer(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_port_hangup + * @port: our tty port + * + * tty port hang up. Called when tty_hangup processing is invoked either + * by loss of carrier, or by software (eg vhangup). Serialized against + * activate/shutdown by the tty layer. + */ +static void ifx_spi_hangup(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_hangup(&ifx_dev->tty_port); +} + +/** + * ifx_port_activate + * @port: our tty port + * + * tty port activate method - called for first open. Serialized + * with hangup and shutdown by the tty layer. + */ +static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + /* clear any old data; can't do this in 'close' */ + kfifo_reset(&ifx_dev->tx_fifo); + + /* put port data into this tty */ + tty->driver_data = ifx_dev; + + /* allows flip string push from int context */ + tty->low_latency = 1; + + return 0; +} + +/** + * ifx_port_shutdown + * @port: our tty port + * + * tty port shutdown method - called for last port close. Serialized + * with hangup and activate by the tty layer. + */ +static void ifx_port_shutdown(struct tty_port *port) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + mrdy_set_low(ifx_dev); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + tasklet_kill(&ifx_dev->io_work_tasklet); +} + +static const struct tty_port_operations ifx_tty_port_ops = { + .activate = ifx_port_activate, + .shutdown = ifx_port_shutdown, +}; + +static const struct tty_operations ifx_spi_serial_ops = { + .open = ifx_spi_open, + .close = ifx_spi_close, + .write = ifx_spi_write, + .hangup = ifx_spi_hangup, + .write_room = ifx_spi_write_room, + .chars_in_buffer = ifx_spi_chars_in_buffer, + .tiocmget = ifx_spi_tiocmget, + .tiocmset = ifx_spi_tiocmset, +}; + +/** + * ifx_spi_insert_fip_string - queue received data + * @ifx_ser: our SPI device + * @chars: buffer we have received + * @size: number of chars reeived + * + * Queue bytes to the tty assuming the tty side is currently open. If + * not the discard the data. + */ +static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, + unsigned char *chars, size_t size) +{ + struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port); + if (!tty) + return; + tty_insert_flip_string(tty, chars, size); + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +/** + * ifx_spi_complete - SPI transfer completed + * @ctx: our SPI device + * + * An SPI transfer has completed. Process any received data and kick off + * any further transmits we can commence. + */ +static void ifx_spi_complete(void *ctx) +{ + struct ifx_spi_device *ifx_dev = ctx; + struct tty_struct *tty; + struct tty_ldisc *ldisc = NULL; + int length; + int actual_length; + unsigned char more; + unsigned char cts; + int local_write_pending = 0; + int queue_length; + int srdy; + int decode_result; + + mrdy_set_low(ifx_dev); + + if (!ifx_dev->spi_msg.status) { + /* check header validity, get comm flags */ + swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, + &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); + decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, + &length, &more, &cts); + if (decode_result == IFX_SPI_HEADER_0) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header 0"); + ifx_dev->spi_slave_cts = 0; + goto complete_exit; + } else if (decode_result == IFX_SPI_HEADER_F) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header F"); + goto complete_exit; + } + + ifx_dev->spi_slave_cts = cts; + + actual_length = min((unsigned int)length, + ifx_dev->spi_msg.actual_length); + swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), + actual_length, + &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); + ifx_spi_insert_flip_string( + ifx_dev, + ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, + (size_t)actual_length); + } else { + dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", + ifx_dev->spi_msg.status); + } + +complete_exit: + if (ifx_dev->write_pending) { + ifx_dev->write_pending = 0; + local_write_pending = 1; + } + + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); + + queue_length = kfifo_len(&ifx_dev->tx_fifo); + srdy = gpio_get_value(ifx_dev->gpio.srdy); + if (!srdy) + ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); + + /* schedule output if there is more to do */ + if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else { + if (more || ifx_dev->spi_more || queue_length > 0 || + local_write_pending) { + if (ifx_dev->spi_slave_cts) { + if (more) + mrdy_assert(ifx_dev); + } else + mrdy_assert(ifx_dev); + } else { + /* + * poke line discipline driver if any for more data + * may or may not get more data to write + * for now, say not busy + */ + ifx_spi_power_state_clear(ifx_dev, + IFX_SPI_POWER_DATA_PENDING); + tty = tty_port_tty_get(&ifx_dev->tty_port); + if (tty) { + ldisc = tty_ldisc_ref(tty); + if (ldisc) { + ldisc->ops->write_wakeup(tty); + tty_ldisc_deref(ldisc); + } + tty_kref_put(tty); + } + } + } +} + +/** + * ifx_spio_io - I/O tasklet + * @data: our SPI device + * + * Queue data for transmission if possible and then kick off the + * transfer. + */ +static void ifx_spi_io(unsigned long data) +{ + int retval; + struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; + + if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { + if (ifx_dev->gpio.unack_srdy_int_nb > 0) + ifx_dev->gpio.unack_srdy_int_nb--; + + ifx_spi_prepare_tx_buffer(ifx_dev); + + spi_message_init(&ifx_dev->spi_msg); + INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); + + ifx_dev->spi_msg.context = ifx_dev; + ifx_dev->spi_msg.complete = ifx_spi_complete; + + /* set up our spi transfer */ + /* note len is BYTES, not transfers */ + ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; + ifx_dev->spi_xfer.cs_change = 0; + ifx_dev->spi_xfer.speed_hz = 12500000; + /* ifx_dev->spi_xfer.speed_hz = 390625; */ + ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; + + ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; + ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; + + /* + * setup dma pointers + */ + if (ifx_dev->is_6160) { + ifx_dev->spi_msg.is_dma_mapped = 1; + ifx_dev->tx_dma = ifx_dev->tx_bus; + ifx_dev->rx_dma = ifx_dev->rx_bus; + ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; + ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; + } else { + ifx_dev->spi_msg.is_dma_mapped = 0; + ifx_dev->tx_dma = (dma_addr_t)0; + ifx_dev->rx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; + } + + spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); + + /* Assert MRDY. This may have already been done by the write + * routine. + */ + mrdy_assert(ifx_dev); + + retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); + if (retval) { + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, + &ifx_dev->flags); + tasklet_schedule(&ifx_dev->io_work_tasklet); + return; + } + } else + ifx_dev->write_pending = 1; +} + +/** + * ifx_spi_free_port - free up the tty side + * @ifx_dev: IFX device going away + * + * Unregister and free up a port when the device goes away + */ +static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) +{ + if (ifx_dev->tty_dev) + tty_unregister_device(tty_drv, ifx_dev->minor); + kfifo_free(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_create_port - create a new port + * @ifx_dev: our spi device + * + * Allocate and initialise the tty port that goes with this interface + * and add it to the tty layer so that it can be opened. + */ +static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) +{ + int ret = 0; + struct tty_port *pport = &ifx_dev->tty_port; + + spin_lock_init(&ifx_dev->fifo_lock); + lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, + &ifx_spi_key, 0); + + if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { + ret = -ENOMEM; + goto error_ret; + } + + pport->ops = &ifx_tty_port_ops; + tty_port_init(pport); + ifx_dev->minor = IFX_SPI_TTY_ID; + ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, + &ifx_dev->spi_dev->dev); + if (IS_ERR(ifx_dev->tty_dev)) { + dev_dbg(&ifx_dev->spi_dev->dev, + "%s: registering tty device failed", __func__); + ret = PTR_ERR(ifx_dev->tty_dev); + goto error_ret; + } + return 0; + +error_ret: + ifx_spi_free_port(ifx_dev); + return ret; +} + +/** + * ifx_spi_handle_srdy - handle SRDY + * @ifx_dev: device asserting SRDY + * + * Check our device state and see what we need to kick off when SRDY + * is asserted. This usually means killing the timer and firing off the + * I/O processing. + */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) +{ + if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { + del_timer_sync(&ifx_dev->spi_timer); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + } + + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); + + if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else + set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); +} + +/** + * ifx_spi_srdy_interrupt - SRDY asserted + * @irq: our IRQ number + * @dev: our ifx device + * + * The modem asserted SRDY. Handle the srdy event + */ +static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + ifx_dev->gpio.unack_srdy_int_nb++; + ifx_spi_handle_srdy(ifx_dev); + return IRQ_HANDLED; +} + +/** + * ifx_spi_reset_interrupt - Modem has changed reset state + * @irq: interrupt number + * @dev: our device pointer + * + * The modem has either entered or left reset state. Check the GPIO + * line to see which. + * + * FIXME: review locking on MR_INPROGRESS versus + * parallel unsolicited reset/solicited reset + */ +static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + int val = gpio_get_value(ifx_dev->gpio.reset_out); + int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); + + if (val == 0) { + /* entered reset */ + set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (!solreset) { + /* unsolicited reset */ + ifx_spi_ttyhangup(ifx_dev); + } + } else { + /* exited reset */ + clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (solreset) { + set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); + wake_up(&ifx_dev->mdm_reset_wait); + } + } + return IRQ_HANDLED; +} + +/** + * ifx_spi_free_device - free device + * @ifx_dev: device to free + * + * Free the IFX device + */ +static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) +{ + ifx_spi_free_port(ifx_dev); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->tx_buffer, + ifx_dev->tx_bus); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->rx_buffer, + ifx_dev->rx_bus); +} + +/** + * ifx_spi_reset - reset modem + * @ifx_dev: modem to reset + * + * Perform a reset on the modem + */ +static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) +{ + int ret; + /* + * set up modem power, reset + * + * delays are required on some platforms for the modem + * to reset properly + */ + set_bit(MR_START, &ifx_dev->mdm_reset_state); + gpio_set_value(ifx_dev->gpio.po, 0); + gpio_set_value(ifx_dev->gpio.reset, 0); + msleep(25); + gpio_set_value(ifx_dev->gpio.reset, 1); + msleep(1); + gpio_set_value(ifx_dev->gpio.po, 1); + msleep(1); + gpio_set_value(ifx_dev->gpio.po, 0); + ret = wait_event_timeout(ifx_dev->mdm_reset_wait, + test_bit(MR_COMPLETE, + &ifx_dev->mdm_reset_state), + IFX_RESET_TIMEOUT); + if (!ret) + dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", + ifx_dev->mdm_reset_state); + + ifx_dev->mdm_reset_state = 0; + return ret; +} + +/** + * ifx_spi_spi_probe - probe callback + * @spi: our possible matching SPI device + * + * Probe for a 6x60 modem on SPI bus. Perform any needed device and + * GPIO setup. + * + * FIXME: + * - Support for multiple devices + * - Split out MID specific GPIO handling eventually + */ + +static int ifx_spi_spi_probe(struct spi_device *spi) +{ + int ret; + int srdy; + struct ifx_modem_platform_data *pl_data = NULL; + struct ifx_spi_device *ifx_dev; + + if (saved_ifx_dev) { + dev_dbg(&spi->dev, "ignoring subsequent detection"); + return -ENODEV; + } + + /* initialize structure to hold our device variables */ + ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); + if (!ifx_dev) { + dev_err(&spi->dev, "spi device allocation failed"); + return -ENOMEM; + } + saved_ifx_dev = ifx_dev; + ifx_dev->spi_dev = spi; + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); + spin_lock_init(&ifx_dev->write_lock); + spin_lock_init(&ifx_dev->power_lock); + ifx_dev->power_status = 0; + init_timer(&ifx_dev->spi_timer); + ifx_dev->spi_timer.function = ifx_spi_timeout; + ifx_dev->spi_timer.data = (unsigned long)ifx_dev; + ifx_dev->is_6160 = pl_data->is_6160; + + /* ensure SPI protocol flags are initialized to enable transfer */ + ifx_dev->spi_more = 0; + ifx_dev->spi_slave_cts = 0; + + /*initialize transfer and dma buffers */ + ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->tx_bus, + GFP_KERNEL); + if (!ifx_dev->tx_buffer) { + dev_err(&spi->dev, "DMA-TX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->rx_bus, + GFP_KERNEL); + if (!ifx_dev->rx_buffer) { + dev_err(&spi->dev, "DMA-RX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + + /* initialize waitq for modem reset */ + init_waitqueue_head(&ifx_dev->mdm_reset_wait); + + spi_set_drvdata(spi, ifx_dev); + tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io, + (unsigned long)ifx_dev); + + set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); + + /* create our tty port */ + ret = ifx_spi_create_port(ifx_dev); + if (ret != 0) { + dev_err(&spi->dev, "create default tty port failed"); + goto error_ret; + } + + pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + if (pl_data) { + ifx_dev->gpio.reset = pl_data->rst_pmu; + ifx_dev->gpio.po = pl_data->pwr_on; + ifx_dev->gpio.mrdy = pl_data->mrdy; + ifx_dev->gpio.srdy = pl_data->srdy; + ifx_dev->gpio.reset_out = pl_data->rst_out; + } else { + dev_err(&spi->dev, "missing platform data!"); + ret = -ENODEV; + goto error_ret; + } + + dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", + ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, + ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); + + /* Configure gpios */ + ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)", + ifx_dev->gpio.reset); + goto error_ret; + } + ret += gpio_direction_output(ifx_dev->gpio.reset, 0); + ret += gpio_export(ifx_dev->gpio.reset, 1); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)", + ifx_dev->gpio.reset); + ret = -EBUSY; + goto error_ret2; + } + + ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); + ret += gpio_direction_output(ifx_dev->gpio.po, 0); + ret += gpio_export(ifx_dev->gpio.po, 1); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (ON)", + ifx_dev->gpio.po); + ret = -EBUSY; + goto error_ret3; + } + + ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)", + ifx_dev->gpio.mrdy); + goto error_ret3; + } + ret += gpio_export(ifx_dev->gpio.mrdy, 1); + ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)", + ifx_dev->gpio.mrdy); + ret = -EBUSY; + goto error_ret4; + } + + ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)", + ifx_dev->gpio.srdy); + ret = -EBUSY; + goto error_ret4; + } + ret += gpio_export(ifx_dev->gpio.srdy, 1); + ret += gpio_direction_input(ifx_dev->gpio.srdy); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)", + ifx_dev->gpio.srdy); + ret = -EBUSY; + goto error_ret5; + } + + ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)", + ifx_dev->gpio.reset_out); + goto error_ret5; + } + ret += gpio_export(ifx_dev->gpio.reset_out, 1); + ret += gpio_direction_input(ifx_dev->gpio.reset_out); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)", + ifx_dev->gpio.reset_out); + ret = -EBUSY; + goto error_ret6; + } + + ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), + ifx_spi_reset_interrupt, + IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, + (void *)ifx_dev); + if (ret) { + dev_err(&spi->dev, "Unable to get irq %x\n", + gpio_to_irq(ifx_dev->gpio.reset_out)); + goto error_ret6; + } + + ret = ifx_spi_reset(ifx_dev); + + ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), + ifx_spi_srdy_interrupt, + IRQF_TRIGGER_RISING, DRVNAME, + (void *)ifx_dev); + if (ret) { + dev_err(&spi->dev, "Unable to get irq %x", + gpio_to_irq(ifx_dev->gpio.srdy)); + goto error_ret7; + } + + /* set pm runtime power state and register with power system */ + pm_runtime_set_active(&spi->dev); + pm_runtime_enable(&spi->dev); + + /* handle case that modem is already signaling SRDY */ + /* no outgoing tty open at this point, this just satisfies the + * modem's read and should reset communication properly + */ + srdy = gpio_get_value(ifx_dev->gpio.srdy); + + if (srdy) { + mrdy_assert(ifx_dev); + ifx_spi_handle_srdy(ifx_dev); + } else + mrdy_set_low(ifx_dev); + return 0; + +error_ret7: + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); +error_ret6: + gpio_free(ifx_dev->gpio.srdy); +error_ret5: + gpio_free(ifx_dev->gpio.mrdy); +error_ret4: + gpio_free(ifx_dev->gpio.reset); +error_ret3: + gpio_free(ifx_dev->gpio.po); +error_ret2: + gpio_free(ifx_dev->gpio.reset_out); +error_ret: + ifx_spi_free_device(ifx_dev); + saved_ifx_dev = NULL; + return ret; +} + +/** + * ifx_spi_spi_remove - SPI device was removed + * @spi: SPI device + * + * FIXME: We should be shutting the device down here not in + * the module unload path. + */ + +static int ifx_spi_spi_remove(struct spi_device *spi) +{ + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + /* stop activity */ + tasklet_kill(&ifx_dev->io_work_tasklet); + /* free irq */ + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); + free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); + + gpio_free(ifx_dev->gpio.srdy); + gpio_free(ifx_dev->gpio.mrdy); + gpio_free(ifx_dev->gpio.reset); + gpio_free(ifx_dev->gpio.po); + gpio_free(ifx_dev->gpio.reset_out); + + /* free allocations */ + ifx_spi_free_device(ifx_dev); + + saved_ifx_dev = NULL; + return 0; +} + +/** + * ifx_spi_spi_shutdown - called on SPI shutdown + * @spi: SPI device + * + * No action needs to be taken here + */ + +static void ifx_spi_spi_shutdown(struct spi_device *spi) +{ +} + +/* + * various suspends and resumes have nothing to do + * no hardware to save state for + */ + +/** + * ifx_spi_spi_suspend - suspend SPI on system suspend + * @dev: device being suspended + * + * Suspend the SPI side. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg) +{ + return 0; +} + +/** + * ifx_spi_spi_resume - resume SPI side on system resume + * @dev: device being suspended + * + * Suspend the SPI side. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_spi_resume(struct spi_device *spi) +{ + return 0; +} + +/** + * ifx_spi_pm_suspend - suspend modem on system suspend + * @dev: device being suspended + * + * Suspend the modem. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_pm_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_resume - resume modem on system resume + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + * + * FIXME: do we need to reset anything here ? + */ +static int ifx_spi_pm_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_resume - suspend modem + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + */ +static int ifx_spi_pm_runtime_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_suspend - suspend modem + * @dev: device being suspended + * + * Allow the modem to suspend and thus suspend to continue up the + * device tree. + */ +static int ifx_spi_pm_runtime_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_idle - check if modem idle + * @dev: our device + * + * Check conditions and queue runtime suspend if idle. + */ +static int ifx_spi_pm_runtime_idle(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + + if (!ifx_dev->power_status) + pm_runtime_suspend(dev); + + return 0; +} + +static const struct dev_pm_ops ifx_spi_pm = { + .resume = ifx_spi_pm_resume, + .suspend = ifx_spi_pm_suspend, + .runtime_resume = ifx_spi_pm_runtime_resume, + .runtime_suspend = ifx_spi_pm_runtime_suspend, + .runtime_idle = ifx_spi_pm_runtime_idle +}; + +static const struct spi_device_id ifx_id_table[] = { + {"ifx6160", 0}, + {"ifx6260", 0}, + { } +}; +MODULE_DEVICE_TABLE(spi, ifx_id_table); + +/* spi operations */ +static const struct spi_driver ifx_spi_driver_6160 = { + .driver = { + .name = "ifx6160", + .bus = &spi_bus_type, + .pm = &ifx_spi_pm, + .owner = THIS_MODULE}, + .probe = ifx_spi_spi_probe, + .shutdown = ifx_spi_spi_shutdown, + .remove = __devexit_p(ifx_spi_spi_remove), + .suspend = ifx_spi_spi_suspend, + .resume = ifx_spi_spi_resume, + .id_table = ifx_id_table +}; + +/** + * ifx_spi_exit - module exit + * + * Unload the module. + */ + +static void __exit ifx_spi_exit(void) +{ + /* unregister */ + tty_unregister_driver(tty_drv); + spi_unregister_driver((void *)&ifx_spi_driver_6160); +} + +/** + * ifx_spi_init - module entry point + * + * Initialise the SPI and tty interfaces for the IFX SPI driver + * We need to initialize upper-edge spi driver after the tty + * driver because otherwise the spi probe will race + */ + +static int __init ifx_spi_init(void) +{ + int result; + + tty_drv = alloc_tty_driver(1); + if (!tty_drv) { + pr_err("%s: alloc_tty_driver failed", DRVNAME); + return -ENOMEM; + } + + tty_drv->magic = TTY_DRIVER_MAGIC; + tty_drv->owner = THIS_MODULE; + tty_drv->driver_name = DRVNAME; + tty_drv->name = TTYNAME; + tty_drv->minor_start = IFX_SPI_TTY_ID; + tty_drv->num = 1; + tty_drv->type = TTY_DRIVER_TYPE_SERIAL; + tty_drv->subtype = SERIAL_TYPE_NORMAL; + tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_drv->init_termios = tty_std_termios; + + tty_set_operations(tty_drv, &ifx_spi_serial_ops); + + result = tty_register_driver(tty_drv); + if (result) { + pr_err("%s: tty_register_driver failed(%d)", + DRVNAME, result); + put_tty_driver(tty_drv); + return result; + } + + result = spi_register_driver((void *)&ifx_spi_driver_6160); + if (result) { + pr_err("%s: spi_register_driver failed(%d)", + DRVNAME, result); + tty_unregister_driver(tty_drv); + } + return result; +} + +module_init(ifx_spi_init); +module_exit(ifx_spi_exit); + +MODULE_AUTHOR("Intel"); +MODULE_DESCRIPTION("IFX6x60 spi driver"); +MODULE_LICENSE("GPL"); +MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h new file mode 100644 index 0000000..deb7b8d --- /dev/null +++ b/drivers/tty/serial/ifx6x60.h @@ -0,0 +1,129 @@ +/**************************************************************************** + * + * Driver for the IFX spi modem. + * + * Copyright (C) 2009, 2010 Intel Corp + * Jim Stanley + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA + * + * + * + *****************************************************************************/ +#ifndef _IFX6X60_H +#define _IFX6X60_H + +#define DRVNAME "ifx6x60" +#define TTYNAME "ttyIFX" + +/* #define IFX_THROTTLE_CODE */ + +#define IFX_SPI_MAX_MINORS 1 +#define IFX_SPI_TRANSFER_SIZE 2048 +#define IFX_SPI_FIFO_SIZE 4096 + +#define IFX_SPI_HEADER_OVERHEAD 4 +#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) + +/* device flags bitfield definitions */ +#define IFX_SPI_STATE_PRESENT 0 +#define IFX_SPI_STATE_IO_IN_PROGRESS 1 +#define IFX_SPI_STATE_IO_READY 2 +#define IFX_SPI_STATE_TIMER_PENDING 3 + +/* flow control bitfields */ +#define IFX_SPI_DCD 0 +#define IFX_SPI_CTS 1 +#define IFX_SPI_DSR 2 +#define IFX_SPI_RI 3 +#define IFX_SPI_DTR 4 +#define IFX_SPI_RTS 5 +#define IFX_SPI_TX_FC 6 +#define IFX_SPI_RX_FC 7 +#define IFX_SPI_UPDATE 8 + +#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ + IFX_SPI_HEADER_OVERHEAD) + +#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING +#define IFX_SPI_GPIO_TARGET 0 +#define IFX_SPI_GPIO0 0x105 + +#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) + +/* values for bits in power status byte */ +#define IFX_SPI_POWER_DATA_PENDING 1 +#define IFX_SPI_POWER_SRDY 2 + +struct ifx_spi_device { + /* Our SPI device */ + struct spi_device *spi_dev; + + /* Port specific data */ + struct kfifo tx_fifo; + spinlock_t fifo_lock; + unsigned long signal_state; + + /* TTY Layer logic */ + struct tty_port tty_port; + struct device *tty_dev; + int minor; + + /* Low level I/O work */ + struct tasklet_struct io_work_tasklet; + unsigned long flags; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + + int is_6160; /* Modem type */ + + spinlock_t write_lock; + int write_pending; + spinlock_t power_lock; + unsigned char power_status; + + unsigned char *rx_buffer; + unsigned char *tx_buffer; + dma_addr_t rx_bus; + dma_addr_t tx_bus; + unsigned char spi_more; + unsigned char spi_slave_cts; + + struct timer_list spi_timer; + + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + struct { + /* gpio lines */ + unsigned short srdy; /* slave-ready gpio */ + unsigned short mrdy; /* master-ready gpio */ + unsigned short reset; /* modem-reset gpio */ + unsigned short po; /* modem-on gpio */ + unsigned short reset_out; /* modem-in-reset gpio */ + /* state/stats */ + int unack_srdy_int_nb; + } gpio; + + /* modem reset */ + unsigned long mdm_reset_state; +#define MR_START 0 +#define MR_INPROGRESS 1 +#define MR_COMPLETE 2 + wait_queue_head_t mdm_reset_wait; +}; + +#endif /* _IFX6X60_H */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c new file mode 100644 index 0000000..dfcf4b1 --- /dev/null +++ b/drivers/tty/serial/imx.c @@ -0,0 +1,1380 @@ +/* + * linux/drivers/serial/imx.c + * + * Driver for Motorola IMX serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Author: Sascha Hauer + * Copyright (C) 2004 Pengutronix + * + * Copyright (C) 2009 emlix GmbH + * Author: Fabian Godehardt (added IrDA support for iMX) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * [29-Mar-2005] Mike Lee + * Added hardware handshake + */ + +#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* Register definitions */ +#define URXD0 0x0 /* Receiver Register */ +#define URTX0 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define MX2_ONEMS 0xb0 /* One Millisecond register */ +#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ +#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_IMX_MAJOR 207 +#define MINOR_START 16 +#define DEV_NAME "ttymxc" +#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +#define DRIVER_NAME "IMX-uart" + +#define UART_NR 8 + +struct imx_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; + int txirq,rxirq,rtsirq; + unsigned int have_rtscts:1; + unsigned int use_irda:1; + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short trcv_delay; /* transceiver delay */ + struct clk *clk; +}; + +#ifdef CONFIG_IRDA +#define USE_IRDA(sport) ((sport)->use_irda) +#else +#define USE_IRDA(sport) (0) +#endif + +/* + * Handle any change of modem status signal since we were last called. + */ +static void imx_mctrl_check(struct imx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void imx_timeout(unsigned long data) +{ + struct imx_port *sport = (struct imx_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + imx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + if (USE_IRDA(sport)) { + /* half duplex - wait for end of transmission */ + int n = 256; + while ((--n > 0) && + !(readl(sport->port.membase + USR2) & USR2_TXDC)) { + udelay(5); + barrier(); + } + /* + * irda transceiver - wait a bit more to avoid + * cutoff, hardware dependent + */ + udelay(sport->trcv_delay); + + /* + * half duplex - reactivate receive mode, + * flush receive pipe echo crap + */ + if (readl(sport->port.membase + USR2) & USR2_TXDC) { + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_TCEN); + writel(temp, sport->port.membase + UCR4); + + while (readl(sport->port.membase + URXD0) & + URXD_CHARRDY) + barrier(); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_DREN; + writel(temp, sport->port.membase + UCR4); + } + return; + } + + temp = readl(sport->port.membase + UCR1); + writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_rx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2); + writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void imx_enable_ms(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static inline void imx_transmit_buffer(struct imx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + while (!uart_circ_empty(xmit) && + !(readl(sport->port.membase + UTS) & UTS_TXFULL)) { + /* send xmit->buf[xmit->tail] + * out the port here */ + writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + imx_stop_tx(&sport->port); +} + +/* + * interrupts disabled on entry + */ +static void imx_start_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + if (USE_IRDA(sport)) { + /* half duplex in IrDA mode; have to disable receive mode */ + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_DREN); + writel(temp, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + } + + temp = readl(sport->port.membase + UCR1); + writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_TRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_TCEN; + writel(temp, sport->port.membase + UCR4); + } + + if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) + imx_transmit_buffer(sport); +} + +static irqreturn_t imx_rtsint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + writel(USR1_RTSD, sport->port.membase + USR1); + uart_handle_cts_change(&sport->port, !!val); + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t imx_txint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock,flags); + if (sport->port.x_char) + { + /* Send next char */ + writel(sport->port.x_char, sport->port.membase + URTX0); + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + imx_stop_tx(&sport->port); + goto out; + } + + imx_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + return IRQ_HANDLED; +} + +static irqreturn_t imx_rxint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int rx,flg,ignored = 0; + struct tty_struct *tty = sport->port.state->port.tty; + unsigned long flags, temp; + + spin_lock_irqsave(&sport->port.lock,flags); + + while (readl(sport->port.membase + USR2) & USR2_RDR) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + + rx = readl(sport->port.membase + URXD0); + + temp = readl(sport->port.membase + USR2); + if (temp & USR2_BRCD) { + writel(USR2_BRCD, sport->port.membase + USR2); + if (uart_handle_break(&sport->port)) + continue; + } + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { + if (rx & URXD_PRERR) + sport->port.icount.parity++; + else if (rx & URXD_FRMERR) + sport->port.icount.frame++; + if (rx & URXD_OVRRUN) + sport->port.icount.overrun++; + + if (rx & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + rx &= sport->port.read_status_mask; + + if (rx & URXD_PRERR) + flg = TTY_PARITY; + else if (rx & URXD_FRMERR) + flg = TTY_FRAME; + if (rx & URXD_OVRRUN) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(tty, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + +static irqreturn_t imx_int(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int sts; + + sts = readl(sport->port.membase + USR1); + + if (sts & USR1_RRDY) + imx_rxint(irq, dev_id); + + if (sts & USR1_TRDY && + readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) + imx_txint(irq, dev_id); + + if (sts & USR1_RTSD) + imx_rtsint(irq, dev_id); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int imx_tx_empty(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; +} + +/* + * We have a modem side uart, so the meanings of RTS and CTS are inverted. + */ +static unsigned int imx_get_mctrl(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + + if (readl(sport->port.membase + USR1) & USR1_RTSS) + tmp |= TIOCM_CTS; + + if (readl(sport->port.membase + UCR2) & UCR2_CTS) + tmp |= TIOCM_RTS; + + return tmp; +} + +static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; + + if (mctrl & TIOCM_RTS) + temp |= UCR2_CTS; + + writel(temp, sport->port.membase + UCR2); +} + +/* + * Interrupts always disabled. + */ +static void imx_break_ctl(struct uart_port *port, int break_state) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags, temp; + + spin_lock_irqsave(&sport->port.lock, flags); + + temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; + + if ( break_state != 0 ) + temp |= UCR1_SNDBRK; + + writel(temp, sport->port.membase + UCR1); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +#define TXTL 2 /* reset default */ +#define RXTL 1 /* reset default */ + +static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) +{ + unsigned int val; + unsigned int ufcr_rfdiv; + + /* set receiver / transmitter trigger level. + * RFDIV is set such way to satisfy requested uartclk value + */ + val = TXTL << 10 | RXTL; + ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) + / sport->port.uartclk; + + if(!ufcr_rfdiv) + ufcr_rfdiv = 1; + + val |= UFCR_RFDIV_REG(ufcr_rfdiv); + + writel(val, sport->port.membase + UFCR); + + return 0; +} + +/* half the RX buffer size */ +#define CTSTL 16 + +static int imx_startup(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + int retval; + unsigned long flags, temp; + + imx_setup_ufcr(sport, 0); + + /* disable the DREN bit (Data Ready interrupt enable) before + * requesting IRQs + */ + temp = readl(sport->port.membase + UCR4); + + if (USE_IRDA(sport)) + temp |= UCR4_IRSC; + + /* set the trigger level for CTS */ + temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF); + temp |= CTSTL<< UCR4_CTSTL_SHF; + + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + + if (USE_IRDA(sport)) { + /* reset fifo's and state machines */ + int i = 100; + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && + (--i > 0)) { + udelay(1); + } + } + + /* + * Allocate the IRQ(s) i.MX1 has three interrupts whereas later + * chips only have one interrupt. + */ + if (sport->txirq > 0) { + retval = request_irq(sport->rxirq, imx_rxint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out1; + + retval = request_irq(sport->txirq, imx_txint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out2; + + /* do not use RTS IRQ on IrDA */ + if (!USE_IRDA(sport)) { + retval = request_irq(sport->rtsirq, imx_rtsint, + (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + DRIVER_NAME, sport); + if (retval) + goto error_out3; + } + } else { + retval = request_irq(sport->port.irq, imx_int, 0, + DRIVER_NAME, sport); + if (retval) { + free_irq(sport->port.irq, sport); + goto error_out1; + } + } + + /* + * Finally, clear and enable interrupts + */ + writel(USR1_RTSD, sport->port.membase + USR1); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + + if (USE_IRDA(sport)) { + temp |= UCR1_IREN; + temp &= ~(UCR1_RTSDEN); + } + + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR2); + temp |= (UCR2_RXEN | UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + + if (USE_IRDA(sport)) { + /* clear RX-FIFO */ + int i = 64; + while ((--i > 0) && + (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { + barrier(); + } + } + + if (!cpu_is_mx1()) { + temp = readl(sport->port.membase + UCR3); + temp |= MX2_UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); + } + + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR4); + if (sport->irda_inv_rx) + temp |= UCR4_INVR; + else + temp &= ~(UCR4_INVR); + writel(temp | UCR4_DREN, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR3); + if (sport->irda_inv_tx) + temp |= UCR3_INVT; + else + temp &= ~(UCR3_INVT); + writel(temp, sport->port.membase + UCR3); + } + + /* + * Enable modem status interrupts + */ + spin_lock_irqsave(&sport->port.lock,flags); + imx_enable_ms(&sport->port); + spin_unlock_irqrestore(&sport->port.lock,flags); + + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + sport->irda_inv_rx = pdata->irda_inv_rx; + sport->irda_inv_tx = pdata->irda_inv_tx; + sport->trcv_delay = pdata->transceiver_delay; + if (pdata->irda_enable) + pdata->irda_enable(1); + } + + return 0; + +error_out3: + if (sport->txirq) + free_irq(sport->txirq, sport); +error_out2: + if (sport->rxirq) + free_irq(sport->rxirq, sport); +error_out1: + return retval; +} + +static void imx_shutdown(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + if (pdata->irda_enable) + pdata->irda_enable(0); + } + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupts + */ + if (sport->txirq > 0) { + if (!USE_IRDA(sport)) + free_irq(sport->rtsirq, sport); + free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); + } else + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); + if (USE_IRDA(sport)) + temp &= ~(UCR1_IREN); + + writel(temp, sport->port.membase + UCR1); +} + +static void +imx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int div, ufcr; + unsigned long num, denom; + uint64_t tdiv64; + + /* + * If we don't support modem control lines, don't allow + * these to be set. + */ + if (0) { + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + } + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; + else + ucr2 = UCR2_SRST | UCR2_IRTS; + + if (termios->c_cflag & CRTSCTS) { + if( sport->have_rtscts ) { + ucr2 &= ~UCR2_IRTS; + ucr2 |= UCR2_CTSC; + } else { + termios->c_cflag &= ~CRTSCTS; + } + } + + if (termios->c_cflag & CSTOPB) + ucr2 |= UCR2_STPB; + if (termios->c_cflag & PARENB) { + ucr2 |= UCR2_PREN; + if (termios->c_cflag & PARODD) + ucr2 |= UCR2_PROE; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= URXD_BRK; + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_PRERR; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= URXD_BRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_OVRRUN; + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ucr1 = readl(sport->port.membase + UCR1); + writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), + sport->port.membase + UCR1); + + while ( !(readl(sport->port.membase + USR2) & USR2_TXDC)) + barrier(); + + /* then, disable everything */ + old_txrxen = readl(sport->port.membase + UCR2); + writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN), + sport->port.membase + UCR2); + old_txrxen &= (UCR2_TXEN | UCR2_RXEN); + + if (USE_IRDA(sport)) { + /* + * use maximum available submodule frequency to + * avoid missing short pulses due to low sampling rate + */ + div = 1; + } else { + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + } + + rational_best_approximation(16 * div * baud, sport->port.uartclk, + 1 << 16, 1 << 16, &num, &denom); + + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_termios_encode_baud_rate(termios, + (speed_t)tdiv64, (speed_t)tdiv64); + + num -= 1; + denom -= 1; + + ufcr = readl(sport->port.membase + UFCR); + ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); + writel(ufcr, sport->port.membase + UFCR); + + writel(num, sport->port.membase + UBIR); + writel(denom, sport->port.membase + UBMR); + + if (!cpu_is_mx1()) + writel(sport->port.uartclk / div / 1000, + sport->port.membase + MX2_ONEMS); + + writel(old_ucr1, sport->port.membase + UCR1); + + /* set the parity, stop bits and data size */ + writel(ucr2 | old_txrxen, sport->port.membase + UCR2); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + imx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *imx_type(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return sport->port.type == PORT_IMX ? "IMX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void imx_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *mmres; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mmres->start, mmres->end - mmres->start + 1); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int imx_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *mmres; + void *ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mmres) + return -ENODEV; + + ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1, + "imx-uart"); + + return ret ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void imx_config_port(struct uart_port *port, int flags) +{ + struct imx_port *sport = (struct imx_port *)port; + + if (flags & UART_CONFIG_TYPE && + imx_request_port(&sport->port) == 0) + sport->port.type = PORT_IMX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_IMX and PORT_UNKNOWN + */ +static int +imx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct imx_port *sport = (struct imx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops imx_pops = { + .tx_empty = imx_tx_empty, + .set_mctrl = imx_set_mctrl, + .get_mctrl = imx_get_mctrl, + .stop_tx = imx_stop_tx, + .start_tx = imx_start_tx, + .stop_rx = imx_stop_rx, + .enable_ms = imx_enable_ms, + .break_ctl = imx_break_ctl, + .startup = imx_startup, + .shutdown = imx_shutdown, + .set_termios = imx_set_termios, + .type = imx_type, + .release_port = imx_release_port, + .request_port = imx_request_port, + .config_port = imx_config_port, + .verify_port = imx_verify_port, +}; + +static struct imx_port *imx_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_IMX_CONSOLE +static void imx_console_putchar(struct uart_port *port, int ch) +{ + struct imx_port *sport = (struct imx_port *)port; + + while (readl(sport->port.membase + UTS) & UTS_TXFULL) + barrier(); + + writel(ch, sport->port.membase + URTX0); +} + +/* + * Interrupts are disabled on entering + */ +static void +imx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct imx_port *sport = imx_ports[co->index]; + unsigned int old_ucr1, old_ucr2, ucr1; + + /* + * First, save UCR1/2 and then disable interrupts + */ + ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); + old_ucr2 = readl(sport->port.membase + UCR2); + + if (cpu_is_mx1()) + ucr1 |= MX1_UCR1_UARTCLKEN; + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); + + writel(ucr1, sport->port.membase + UCR1); + + writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); + + uart_console_write(&sport->port, s, count, imx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UCR1/2 + */ + while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); + + writel(old_ucr1, sport->port.membase + UCR1); + writel(old_ucr2, sport->port.membase + UCR2); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +imx_console_get_options(struct imx_port *sport, int *baud, + int *parity, int *bits) +{ + + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { + /* ok, the port was enabled */ + unsigned int ucr2, ubir,ubmr, uartclk; + unsigned int baud_raw; + unsigned int ucfr_rfdiv; + + ucr2 = readl(sport->port.membase + UCR2); + + *parity = 'n'; + if (ucr2 & UCR2_PREN) { + if (ucr2 & UCR2_PROE) + *parity = 'o'; + else + *parity = 'e'; + } + + if (ucr2 & UCR2_WS) + *bits = 8; + else + *bits = 7; + + ubir = readl(sport->port.membase + UBIR) & 0xffff; + ubmr = readl(sport->port.membase + UBMR) & 0xffff; + + ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; + if (ucfr_rfdiv == 6) + ucfr_rfdiv = 7; + else + ucfr_rfdiv = 6 - ucfr_rfdiv; + + uartclk = clk_get_rate(sport->clk); + uartclk /= ucfr_rfdiv; + + { /* + * The next code provides exact computation of + * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) + * without need of float support or long long division, + * which would be required to prevent 32bit arithmetic overflow + */ + unsigned int mul = ubir + 1; + unsigned int div = 16 * (ubmr + 1); + unsigned int rem = uartclk % div; + + baud_raw = (uartclk / div) * mul; + baud_raw += (rem * mul + div / 2) / div; + *baud = (baud_raw + 50) / 100 * 100; + } + + if(*baud != baud_raw) + printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n", + baud_raw, *baud); + } +} + +static int __init +imx_console_setup(struct console *co, char *options) +{ + struct imx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) + co->index = 0; + sport = imx_ports[co->index]; + if(sport == NULL) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + imx_console_get_options(sport, &baud, &parity, &bits); + + imx_setup_ufcr(sport, 0); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver imx_reg; +static struct console imx_console = { + .name = DEV_NAME, + .write = imx_console_write, + .device = uart_console_device, + .setup = imx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &imx_reg, +}; + +#define IMX_CONSOLE &imx_console +#else +#define IMX_CONSOLE NULL +#endif + +static struct uart_driver imx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .major = SERIAL_IMX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(imx_ports), + .cons = IMX_CONSOLE, +}; + +static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) +{ + struct imx_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_suspend_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_resume(struct platform_device *dev) +{ + struct imx_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_resume_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_probe(struct platform_device *pdev) +{ + struct imx_port *sport; + struct imxuart_platform_data *pdata; + void __iomem *base; + int ret = 0; + struct resource *res; + + sport = kzalloc(sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto free; + } + + base = ioremap(res->start, PAGE_SIZE); + if (!base) { + ret = -ENOMEM; + goto free; + } + + sport->port.dev = &pdev->dev; + sport->port.mapbase = res->start; + sport->port.membase = base; + sport->port.type = PORT_IMX, + sport->port.iotype = UPIO_MEM; + sport->port.irq = platform_get_irq(pdev, 0); + sport->rxirq = platform_get_irq(pdev, 0); + sport->txirq = platform_get_irq(pdev, 1); + sport->rtsirq = platform_get_irq(pdev, 2); + sport->port.fifosize = 32; + sport->port.ops = &imx_pops; + sport->port.flags = UPF_BOOT_AUTOCONF; + sport->port.line = pdev->id; + init_timer(&sport->timer); + sport->timer.function = imx_timeout; + sport->timer.data = (unsigned long)sport; + + sport->clk = clk_get(&pdev->dev, "uart"); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto unmap; + } + clk_enable(sport->clk); + + sport->port.uartclk = clk_get_rate(sport->clk); + + imx_ports[pdev->id] = sport; + + pdata = pdev->dev.platform_data; + if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) + sport->have_rtscts = 1; + +#ifdef CONFIG_IRDA + if (pdata && (pdata->flags & IMXUART_IRDA)) + sport->use_irda = 1; +#endif + + if (pdata && pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } + + ret = uart_add_one_port(&imx_reg, &sport->port); + if (ret) + goto deinit; + platform_set_drvdata(pdev, &sport->port); + + return 0; +deinit: + if (pdata && pdata->exit) + pdata->exit(pdev); +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); +unmap: + iounmap(sport->port.membase); +free: + kfree(sport); + + return ret; +} + +static int serial_imx_remove(struct platform_device *pdev) +{ + struct imxuart_platform_data *pdata; + struct imx_port *sport = platform_get_drvdata(pdev); + + pdata = pdev->dev.platform_data; + + platform_set_drvdata(pdev, NULL); + + if (sport) { + uart_remove_one_port(&imx_reg, &sport->port); + clk_put(sport->clk); + } + + clk_disable(sport->clk); + + if (pdata && pdata->exit) + pdata->exit(pdev); + + iounmap(sport->port.membase); + kfree(sport); + + return 0; +} + +static struct platform_driver serial_imx_driver = { + .probe = serial_imx_probe, + .remove = serial_imx_remove, + + .suspend = serial_imx_suspend, + .resume = serial_imx_resume, + .driver = { + .name = "imx-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init imx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IMX driver\n"); + + ret = uart_register_driver(&imx_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_imx_driver); + if (ret != 0) + uart_unregister_driver(&imx_reg); + + return 0; +} + +static void __exit imx_serial_exit(void) +{ + platform_driver_unregister(&serial_imx_driver); + uart_unregister_driver(&imx_reg); +} + +module_init(imx_serial_init); +module_exit(imx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("IMX generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c new file mode 100644 index 0000000..ee43efc --- /dev/null +++ b/drivers/tty/serial/ioc3_serial.c @@ -0,0 +1,2199 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * This file contains a module version of the ioc3 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Interesting things about the ioc3 + */ + +#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */ +#define PORTS_PER_CARD 2 +#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS) +#define MAX_CARDS 8 +#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS) + +/* determine given the sio_ir what port it applies to */ +#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1 + + +/* + * we have 2 logical ports (rs232, rs422) for each physical port + * evens are rs232, odds are rs422 + */ +#define GET_PHYSICAL_PORT(_x) ((_x) >> 1) +#define GET_LOGICAL_PORT(_x) ((_x) & 1) +#define IS_PHYSICAL_PORT(_x) !((_x) & 1) +#define IS_RS232(_x) !((_x) & 1) + +static unsigned int Num_of_ioc3_cards; +static unsigned int Submodule_slot; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x +#define NOT_PROGRESS() ; +//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) + +/* number of characters we want to transmit to the lower level at a time */ +#define MAX_CHARS 256 +#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */ + +/* Device name we're using */ +#define DEVICE_NAME "ttySIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 116 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +#define PROTO_RS232 0 +#define PROTO_RS422 1 + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK \ + | N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \ + | N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv) +#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable) + +#define RING_BUF_SIZE 4096 +#define BUF_SIZE_BIT SBBR_L_SIZE +#define PROD_CONS_MASK PROD_CONS_PTR_4K + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* driver specific - one per card */ +struct ioc3_card { + struct { + /* uart ports are allocated here */ + struct uart_port icp_uart_port[LOGICAL_PORTS]; + /* the ioc3_port used for this port */ + struct ioc3_port *icp_port; + } ic_port[PORTS_PER_CARD]; + /* currently enabled interrupts */ + uint32_t ic_enable; +}; + +/* Local port info for each IOC3 serial port */ +struct ioc3_port { + /* handy reference material */ + struct uart_port *ip_port; + struct ioc3_card *ip_card; + struct ioc3_driver_data *ip_idd; + struct ioc3_submodule *ip_is; + + /* pci mem addresses for this port */ + struct ioc3_serialregs __iomem *ip_serial_regs; + struct ioc3_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct port_hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 + /* used to signify that we have turned off the rx_high + * temporarily - we need to drain the fifo and don't + * want to get blasted with interrupts. + */ +#define DCD_ON 0x02 + /* DCD state is on */ +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 + /* the read was aborted - used to avaoid infinate looping + * in the interrupt handler + */ +#define INPUT_ENABLE 0x10 + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct port_hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_clear; + uint32_t intr_all; + char rs422_select_pin; +}; + +static struct port_hooks hooks_array[PORTS_PER_CARD] = { + /* values for port A */ + { + .intr_delta_dcd = SIO_IR_SA_DELTA_DCD, + .intr_delta_cts = SIO_IR_SA_DELTA_CTS, + .intr_tx_mt = SIO_IR_SA_TX_MT, + .intr_rx_timer = SIO_IR_SA_RX_TIMER, + .intr_rx_high = SIO_IR_SA_RX_HIGH, + .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT, + .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL + | SIO_IR_SA_RX_HIGH + | SIO_IR_SA_RX_TIMER + | SIO_IR_SA_DELTA_DCD + | SIO_IR_SA_DELTA_CTS + | SIO_IR_SA_INT + | SIO_IR_SA_TX_EXPLICIT + | SIO_IR_SA_MEMERR), + .intr_all = SIO_IR_SA, + .rs422_select_pin = GPPR_UARTA_MODESEL_PIN, + }, + + /* values for port B */ + { + .intr_delta_dcd = SIO_IR_SB_DELTA_DCD, + .intr_delta_cts = SIO_IR_SB_DELTA_CTS, + .intr_tx_mt = SIO_IR_SB_TX_MT, + .intr_rx_timer = SIO_IR_SB_RX_TIMER, + .intr_rx_high = SIO_IR_SB_RX_HIGH, + .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT, + .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL + | SIO_IR_SB_RX_HIGH + | SIO_IR_SB_RX_TIMER + | SIO_IR_SB_DELTA_DCD + | SIO_IR_SB_DELTA_CTS + | SIO_IR_SB_INT + | SIO_IR_SB_TX_EXPLICIT + | SIO_IR_SB_MEMERR), + .intr_all = SIO_IR_SB, + .rs422_select_pin = GPPR_UARTB_MODESEL_PIN, + } +}; + +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_A; + struct ring RX_A; + struct ring TX_B; + struct ring RX_B; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* for Infinite loop detection */ +#define MAXITER 10000000 + + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc3_port *port, int baud) +{ + int divisor; + int actual_baud; + int diff; + int lcr, prediv; + struct ioc3_uartregs __iomem *uart; + + for (prediv = 6; prediv < 64; prediv++) { + divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv)); + if (!divisor) + continue; /* invalid divisor */ + actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv)); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* if we're within 1% we've found a match */ + if (diff * 100 <= actual_baud) + break; + } + + /* if the above loop completed, we didn't match + * the baud rate. give up. + */ + if (prediv == 64) { + NOT_PROGRESS(); + return 1; + } + + uart = port->ip_uart_regs; + lcr = readb(&uart->iu_lcr); + + writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr); + writeb((unsigned char)divisor, &uart->iu_dll); + writeb((unsigned char)(divisor >> 8), &uart->iu_dlm); + writeb((unsigned char)prediv, &uart->iu_scr); + writeb((unsigned char)lcr, &uart->iu_lcr); + + return 0; +} + +/** + * get_ioc3_port - given a uart port, return the control structure + * @the_port: uart port to find + */ +static struct ioc3_port *get_ioc3_port(struct uart_port *the_port) +{ + struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev); + struct ioc3_card *card_ptr = idd->data[Submodule_slot]; + int ii, jj; + + if (!card_ptr) { + NOT_PROGRESS(); + return NULL; + } + for (ii = 0; ii < PORTS_PER_CARD; ii++) { + for (jj = 0; jj < LOGICAL_PORTS; jj++) { + if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj]) + return card_ptr->ic_port[ii].icp_port; + } + } + NOT_PROGRESS(); + return NULL; +} + +/** + * port_init - Initialize the sio and ioc3 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc3_port *port) +{ + uint32_t sio_cr; + struct port_hooks *hooks = port->ip_hooks; + struct ioc3_uartregs __iomem *uart; + int reset_loop_counter = 0xfffff; + struct ioc3_driver_data *idd = port->ip_idd; + + /* Idle the IOC3 serial interface */ + writel(SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do { + sio_cr = readl(&idd->vma->sio_cr); + if (reset_loop_counter-- <= 0) { + printk(KERN_WARNING + "IOC3 unable to come out of reset" + " scr 0x%x\n", sio_cr); + return -1; + } + } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) && + (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA) + || sio_cr == SIO_CR_ARB_DIAG_TXB + || sio_cr == SIO_CR_ARB_DIAG_RXA + || sio_cr == SIO_CR_ARB_DIAG_RXB)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->iu_lcr); + writeb(0, &uart->iu_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->iu_fcr); + + /* Clear modem control register */ + writeb(0, &uart->iu_mcr); + + /* Clear deltas in modem status register */ + writel(0, &port->ip_serial_regs->shadow); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l, *sbbr_h; + + sbbr_l = &idd->vma->sbbr_l; + sbbr_h = &idd->vma->sbbr_h; + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", + __func__, (void *)ring_pci_addr)); + + writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + + /* uart experiences pauses at high baud rate reducing actual + * throughput by 10% or so unless we enable high speed polling + * XXX when this hardware bug is resolved we should revert to + * normal polling speed + */ + port->ip_sscr |= SSCR_HIGH_SPD; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + port->ip_card->ic_enable &= ~hooks->intr_clear; + ioc3_disable(port->ip_is, idd, hooks->intr_clear); + ioc3_ack(port->ip_is, idd, hooks->intr_clear); + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc3_port *port, uint32_t mask) +{ + if ((port->ip_card->ic_enable & mask) != mask) { + port->ip_card->ic_enable |= mask; + ioc3_enable(port->ip_is, port->ip_idd, mask); + } +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc3_port *port) +{ + int spiniter = 0; + + port->ip_flags = INPUT_ENABLE; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + NOT_PROGRESS(); + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->iu_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc3_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. + */ + threshold = timeout * port->ip_baud / 4000; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value + * again timeout * SRTR_HZ / HZ + */ + timeout = timeout * SRTR_HZ / 100; + if (timeout > SRTR_CNT) + timeout = SRTR_CNT; + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc3_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " + "parodd %d\n", + __func__, ((struct uart_port *)port->ip_port)->line, + baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->iu_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->iu_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, 2); + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc3_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct port_hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) { + port->ip_sscr |= SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static inline void disable_intrs(struct ioc3_port *port, uint32_t mask) +{ + if (port->ip_card->ic_enable & mask) { + ioc3_disable(port->ip_is, port->ip_idd, mask); + port->ip_card->ic_enable &= ~mask; + } +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc3_port *port, int mask, int set_on) +{ + struct port_hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= SSCR_DMA_EN; + else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt)) + port->ip_sscr &= ~SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, + int mask1, int mask2) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + mcr |= mask1; + shadow |= mask2; + writeb(mcr, &port->ip_uart_regs->iu_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc3_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc3_set_proto(struct ioc3_port *port, int proto) +{ + struct port_hooks *hooks = port->ip_hooks; + + switch (proto) { + default: + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + DPRINT_CONFIG(("%s: rs232\n", __func__)); + writel(0, (&port->ip_idd->vma->gppr[0] + + hooks->rs422_select_pin)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + DPRINT_CONFIG(("%s: rs422\n", __func__)); + writel(1, (&port->ip_idd->vma->gppr[0] + + hooks->rs422_select_pin)); + break; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with the_port->lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc3_port *port = get_ioc3_port(the_port); + struct uart_state *state; + + if (!the_port) + return; + if (!port) + return; + + state = the_port->state; + tty = state->port.tty; + + if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = state->xmit.head; + tail = state->xmit.tail; + start = (char *)&state->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + state->xmit.tail = tail; + start = (char *)&state->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&state->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc3_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc3_change_speed(struct uart_port *the_port, + struct ktermios *new_termios, struct ktermios *old_termios) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + unsigned int cflag, iflag; + int baud; + int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; + struct uart_state *state = the_port->state; + + cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + break; + case CS6: + new_data = 6; + break; + case CS7: + new_data = 7; + break; + case CS8: + new_data = 8; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + break; + } + if (cflag & CSTOPB) { + new_stop = 1; + } + if (cflag & PARENB) { + new_parity_enable = 1; + if (cflag & PARODD) + new_parity = 1; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, + the_port->line)); + + if (!the_port->fifosize) + the_port->fifosize = FIFO_SIZE; + uart_update_timeout(the_port, cflag, baud); + + the_port->ignore_status_mask = N_ALL_INPUT; + + state->port.tty->low_latency = 1; + + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (iflag & IGNBRK) { + the_port->ignore_status_mask &= ~N_BREAK; + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) { + /* enable hardware flow control */ + port->ip_sscr |= SSCR_HFC_EN; + } + else { + /* disable hardware flow control */ + port->ip_sscr &= ~SSCR_HFC_EN; + } + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " + "config_port(baud %d data %d stop %d penable %d " + " parity %d), notification 0x%x\n", + __func__, (void *)port, the_port->line, cflag, baud, + new_data, new_stop, new_parity_enable, new_parity, + the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic3_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic3_startup_local(struct uart_port *the_port) +{ + struct ioc3_port *port; + + if (!the_port) { + NOT_PROGRESS(); + return -1; + } + + port = get_ioc3_port(the_port); + if (!port) { + NOT_PROGRESS(); + return -1; + } + + local_open(port); + + /* set the protocol */ + ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 : + PROTO_RS422); + return 0; +} + +/* + * ioc3_cb_output_lowat - called when the output low water mark is hit + * @port: port to output + */ +static void ioc3_cb_output_lowat(struct ioc3_port *port) +{ + unsigned long pflags; + + /* the_port->lock is set on the call here */ + if (port->ip_port) { + spin_lock_irqsave(&port->ip_port->lock, pflags); + transmit_chars(port->ip_port); + spin_unlock_irqrestore(&port->ip_port->lock, pflags); + } +} + +/* + * ioc3_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc3_port *port = get_ioc3_port(the_port); + struct ring *inring; + struct ring_entry *entry; + struct port_hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC3. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + + writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & SSCR_DMA_EN)) { + port->ip_sscr |= SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t) inring + cons_ptr); + + if (loop_counter-- <= 0) { + printk(KERN_WARNING "IOC3 serial: " + "possible hang condition/" + "port stuck on read (line %d).\n", + the_port->line); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + if ((port->ip_flags & DCD_ON) + && !(*sc & RXSB_DCD)) { + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + uart_handle_dcd_change + (port->ip_port, 0); + wake_up_interruptible + (&the_port->state-> + port.delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc3_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & RXSB_DATA_VALID) && + ((*sc & (RXSB_PAR_ERR + | RXSB_FRAME_ERR | RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & RXSB_PAR_ERR) && + (port-> + ip_notify & N_PARITY_ERROR)) { + ioc3_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & RXSB_FRAME_ERR) && + (port-> + ip_notify & N_FRAMING_ERROR)) { + ioc3_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc3_cb_post_ncs + (the_port, NCS_BREAK); + } + len = 1; + } + } + if (*sc & RXSB_DATA_VALID) { + *sc &= ~RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < + ((port-> + ip_sscr & + SSCR_RX_THRESHOLD) + << PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} + +/** + * receive_chars - upper level read. + * @the_port: port to read from + */ +static int receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[MAX_CHARS]; + int read_count = 0, read_room, flip = 0; + struct uart_state *state = the_port->state; + struct ioc3_port *port = get_ioc3_port(the_port); + unsigned long pflags; + + /* Make sure all the pointers are "good" ones */ + if (!state) + return 0; + if (!state->port.tty) + return 0; + + if (!(port->ip_flags & INPUT_ENABLE)) + return 0; + + spin_lock_irqsave(&the_port->lock, pflags); + tty = state->port.tty; + + read_count = do_read(the_port, ch, MAX_CHARS); + if (read_count > 0) { + flip = 1; + read_room = tty_insert_flip_string(tty, ch, read_count); + the_port->icount.rx += read_count; + } + spin_unlock_irqrestore(&the_port->lock, pflags); + + if (flip) + tty_flip_buffer_push(tty); + + return read_count; +} + +/** + * ioc3uart_intr_one - lowest level (per port) interrupt handler. + * @is : submodule + * @idd: driver data + * @pending: interrupts to handle + */ + +static int inline +ioc3uart_intr_one(struct ioc3_submodule *is, + struct ioc3_driver_data *idd, + unsigned int pending) +{ + int port_num = GET_PORT_FROM_SIO_IR(pending); + struct port_hooks *hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned long flags; + struct uart_port *the_port; + struct ioc3_port *port; + int loop_counter; + struct ioc3_card *card_ptr; + unsigned int sio_ir; + + card_ptr = idd->data[is->id]; + port = card_ptr->ic_port[port_num].icp_port; + hooks = port->ip_hooks; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + + sio_ir = pending & ~(hooks->intr_tx_mt); + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if (loop_counter-- <= 0) { + printk(KERN_WARNING "IOC3 serial: " + "possible hang condition/" + "port stuck on interrupt (line %d).\n", + ((struct uart_port *)port->ip_port)->line); + break; + } + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + ioc3_ack(is, idd, hooks->intr_delta_dcd); + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + uart_handle_dcd_change(the_port, + shadow & SHADOW_DCD); + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + uart_handle_dcd_change(port->ip_port, + shadow & SHADOW_DCD); + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + ioc3_ack(is, idd, hooks->intr_delta_cts); + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) && (port->ip_port)) { + the_port = port->ip_port; + uart_handle_cts_change(the_port, shadow + & SHADOW_CTS); + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + ioc3_ack(is, idd, hooks->intr_rx_timer); + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) && port->ip_port) { + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(card_ptr, idd)) + & hooks->intr_rx_high) { + if (port->ip_flags & READ_ABORTED) { + rx_high_rd_aborted++; + } + else { + card_ptr->ic_enable &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + ioc3_ack(is, idd, hooks->intr_tx_explicit); + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc3_cb_output_lowat(port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc3_cb_output_lowat(port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(card_ptr, idd); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & SSCR_DMA_EN)); + port->ip_sscr &= ~SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + /* Prevent infinite tx_mt interrupt */ + card_ptr->ic_enable &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(card_ptr, idd); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + ioc3_enable(is, idd, card_ptr->ic_enable); + return 0; +} + +/** + * ioc3uart_intr - field all serial interrupts + * @is : submodule + * @idd: driver data + * @pending: interrupts to handle + * + */ + +static int ioc3uart_intr(struct ioc3_submodule *is, + struct ioc3_driver_data *idd, + unsigned int pending) +{ + int ret = 0; + + /* + * The upper level interrupt handler sends interrupts for both ports + * here. So we need to call for each port with its interrupts. + */ + + if (pending & SIO_IR_SA) + ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA); + if (pending & SIO_IR_SB) + ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB); + + return ret; +} + +/** + * ic3_type + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic3_type(struct uart_port *the_port) +{ + if (IS_RS232(the_port->line)) + return "SGI IOC3 Serial [rs232]"; + else + return "SGI IOC3 Serial [rs422]"; +} + +/** + * ic3_tx_empty - Is the transmitter empty? + * @port: Port to operate on + * + */ +static unsigned int ic3_tx_empty(struct uart_port *the_port) +{ + unsigned int ret = 0; + struct ioc3_port *port = get_ioc3_port(the_port); + + if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT) + ret = TIOCSER_TEMT; + return ret; +} + +/** + * ic3_stop_tx - stop the transmitter + * @port: Port to operate on + * + */ +static void ic3_stop_tx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) + set_notification(port, N_OUTPUT_LOWAT, 0); +} + +/** + * ic3_stop_rx - stop the receiver + * @port: Port to operate on + * + */ +static void ic3_stop_rx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) + port->ip_flags &= ~INPUT_ENABLE; +} + +/** + * null_void_function + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic3_shutdown - shut down the port - free irq and disable + * @port: port to shut down + * + */ +static void ic3_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc3_port *port; + struct uart_state *state; + + port = get_ioc3_port(the_port); + if (!port) + return; + + state = the_port->state; + wake_up_interruptible(&state->port.delta_msr_wait); + + spin_lock_irqsave(&the_port->lock, port_flags); + set_notification(port, N_ALL, 0); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic3_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, mcr, SHADOW_DTR); +} + +/** + * ic3_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic3_get_mctrl(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + uint32_t shadow; + unsigned int ret = 0; + + if (!port) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & SHADOW_DCD) + ret |= TIOCM_CD; + if (shadow & SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic3_start_tx - Start transmitter. Called with the_port->lock + * @port: Port to operate on + * + */ +static void ic3_start_tx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) { + set_notification(port, N_OUTPUT_LOWAT, 1); + enable_intrs(port, port->ip_hooks->intr_tx_mt); + } +} + +/** + * ic3_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic3_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic3_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int ic3_startup(struct uart_port *the_port) +{ + int retval; + struct ioc3_port *port; + struct ioc3_card *card_ptr; + unsigned long port_flags; + + if (!the_port) { + NOT_PROGRESS(); + return -ENODEV; + } + port = get_ioc3_port(the_port); + if (!port) { + NOT_PROGRESS(); + return -ENODEV; + } + card_ptr = port->ip_card; + port->ip_port = the_port; + + if (!card_ptr) { + NOT_PROGRESS(); + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&the_port->lock, port_flags); + retval = ic3_startup_local(the_port); + spin_unlock_irqrestore(&the_port->lock, port_flags); + return retval; +} + +/** + * ic3_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic3_set_termios(struct uart_port *the_port, + struct ktermios *termios, struct ktermios *old_termios) +{ + unsigned long port_flags; + + spin_lock_irqsave(&the_port->lock, port_flags); + ioc3_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic3_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic3_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ +static struct uart_ops ioc3_ops = { + .tx_empty = ic3_tx_empty, + .set_mctrl = ic3_set_mctrl, + .get_mctrl = ic3_get_mctrl, + .stop_tx = ic3_stop_tx, + .start_tx = ic3_start_tx, + .stop_rx = ic3_stop_rx, + .enable_ms = null_void_function, + .break_ctl = ic3_break_ctl, + .startup = ic3_startup, + .shutdown = ic3_shutdown, + .set_termios = ic3_set_termios, + .type = ic3_type, + .release_port = null_void_function, + .request_port = ic3_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc3_uart = { + .owner = THIS_MODULE, + .driver_name = "ioc3_serial", + .dev_name = DEVICE_NAME, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR, + .nr = MAX_LOGICAL_PORTS +}; + +/** + * ioc3_serial_core_attach - register with serial core + * This is done during pci probing + * @is: submodule struct for this + * @idd: handle for this card + */ +static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, + struct ioc3_driver_data *idd) +{ + struct ioc3_port *port; + struct uart_port *the_port; + struct ioc3_card *card_ptr = idd->data[is->id]; + int ii, phys_port; + struct pci_dev *pdev = idd->pdev; + + DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", + __func__, pdev, (void *)card_ptr)); + + if (!card_ptr) + return -ENODEV; + + /* once around for each logical port on this card */ + for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { + phys_port = GET_PHYSICAL_PORT(ii); + the_port = &card_ptr->ic_port[phys_port]. + icp_uart_port[GET_LOGICAL_PORT(ii)]; + port = card_ptr->ic_port[phys_port].icp_port; + port->ip_port = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", + __func__, (void *)the_port, (void *)port, + phys_port, ii)); + + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->iobase = (pdev->bus->number << 16) | ii; + the_port->line = (Num_of_ioc3_cards << 2) | ii; + the_port->mapbase = 1; + the_port->type = PORT_16550A; + the_port->fifosize = FIFO_SIZE; + the_port->ops = &ioc3_ops; + the_port->irq = idd->irq_io; + the_port->dev = &pdev->dev; + + if (uart_add_one_port(&ioc3_uart, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d bus %d\n", + __func__, the_port->line, pdev->bus->number); + } else { + DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", + the_port->line, the_port->irq, pdev->bus->number)); + } + + /* all ports are rs232 for now */ + if (IS_PHYSICAL_PORT(ii)) + ioc3_set_proto(port, PROTO_RS232); + } + return 0; +} + +/** + * ioc3uart_remove - register detach function + * @is: submodule struct for this submodule + * @idd: ioc3 driver data for this submodule + */ + +static int ioc3uart_remove(struct ioc3_submodule *is, + struct ioc3_driver_data *idd) +{ + struct ioc3_card *card_ptr = idd->data[is->id]; + struct uart_port *the_port; + struct ioc3_port *port; + int ii; + + if (card_ptr) { + for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { + the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. + icp_uart_port[GET_LOGICAL_PORT(ii)]; + if (the_port) + uart_remove_one_port(&ioc3_uart, the_port); + port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port; + if (port && IS_PHYSICAL_PORT(ii) + && (GET_PHYSICAL_PORT(ii) == 0)) { + pci_free_consistent(port->ip_idd->pdev, + TOTAL_RING_BUF_SIZE, + (void *)port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. + icp_port = NULL; + } + } + kfree(card_ptr); + idd->data[is->id] = NULL; + } + return 0; +} + +/** + * ioc3uart_probe - card probe function called from shim driver + * @is: submodule struct for this submodule + * @idd: ioc3 driver data for this card + */ + +static int __devinit +ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) +{ + struct pci_dev *pdev = idd->pdev; + struct ioc3_card *card_ptr; + int ret = 0; + struct ioc3_port *port; + struct ioc3_port *ports[PORTS_PER_CARD]; + int phys_port; + int cnt; + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); + + card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); + if (!card_ptr) { + printk(KERN_WARNING "ioc3_attach_one" + ": unable to get memory for the IOC3\n"); + return -ENOMEM; + } + idd->data[is->id] = card_ptr; + Submodule_slot = is->id; + + writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) | + ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) | + (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr); + + pci_write_config_dword(pdev, PCI_LAT, 0xff00); + + /* Enable serial port mode select generic PIO pins as outputs */ + ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL); + + /* Create port structures for each port */ + for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { + port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC3 serial memory not available for port\n"); + ret = -ENOMEM; + goto out4; + } + spin_lock_init(&port->ip_lock); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[phys_port] = port; + + /* init to something useful */ + card_ptr->ic_port[phys_port].icp_port = port; + port->ip_is = is; + port->ip_idd = idd; + port->ip_baud = 9600; + port->ip_card = card_ptr; + port->ip_hooks = &hooks_array[phys_port]; + + /* Setup each port */ + if (phys_port == 0) { + port->ip_serial_regs = &idd->vma->port_a; + port->ip_uart_regs = &idd->vma->sregs.uarta; + + DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " + "ip_uart_regs 0x%p\n", + __func__, + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* setup ring buffers */ + port->ip_cpu_ringbuf = pci_alloc_consistent(pdev, + TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf); + + BUG_ON(!((((int64_t) port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + port->ip_inring = RING(port, RX_A); + port->ip_outring = RING(port, TX_A); + DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p, ip_inring 0x%p " + "ip_outring 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf, + (void *)port->ip_inring, + (void *)port->ip_outring)); + } + else { + port->ip_serial_regs = &idd->vma->port_b; + port->ip_uart_regs = &idd->vma->sregs.uartb; + + DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " + "ip_uart_regs 0x%p\n", + __func__, + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* share the ring buffers */ + port->ip_dma_ringbuf = + ports[phys_port - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[phys_port - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_B); + port->ip_outring = RING(port, TX_B); + DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p, ip_inring 0x%p " + "ip_outring 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf, + (void *)port->ip_inring, + (void *)port->ip_outring)); + } + + DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", + __func__, + phys_port, (void *)port, (void *)card_ptr)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC3 */ + port_init(port); + + DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __func__, + phys_port, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + } + + /* register port with the serial core */ + + if ((ret = ioc3_serial_core_attach(is, idd))) + goto out4; + + Num_of_ioc3_cards++; + + return ret; + + /* error exits that give back resources */ +out4: + for (cnt = 0; cnt < phys_port; cnt++) + kfree(ports[cnt]); + + kfree(card_ptr); + return ret; +} + +static struct ioc3_submodule ioc3uart_ops = { + .name = "IOC3uart", + .probe = ioc3uart_probe, + .remove = ioc3uart_remove, + /* call .intr for both ports initially */ + .irq_mask = SIO_IR_SA | SIO_IR_SB, + .intr = ioc3uart_intr, + .owner = THIS_MODULE, +}; + +/** + * ioc3_detect - module init called, + */ +static int __init ioc3uart_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc3_uart)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register IOC3 uart serial driver\n", + __func__); + return ret; + } + ret = ioc3_register_submodule(&ioc3uart_ops); + if (ret) + uart_unregister_driver(&ioc3_uart); + return ret; +} + +static void __exit ioc3uart_exit(void) +{ + ioc3_unregister_submodule(&ioc3uart_ops); + uart_unregister_driver(&ioc3_uart); +} + +module_init(ioc3uart_init); +module_exit(ioc3uart_exit); + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c new file mode 100644 index 0000000..fcfe826 --- /dev/null +++ b/drivers/tty/serial/ioc4_serial.c @@ -0,0 +1,2953 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. + */ + + +/* + * This file contains a module version of the ioc4 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * interesting things about the ioc4 + */ + +#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ +#define IOC4_NUM_CARDS 8 /* max cards per partition */ + +#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ + (_n == 1) ? (IOC4_SIO_IR_S1) : \ + (_n == 2) ? (IOC4_SIO_IR_S2) : \ + (IOC4_SIO_IR_S3) + +#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ + (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ + (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ + (IOC4_OTHER_IR_S3_MEMERR) + + +/* + * All IOC4 registers are 32 bits wide. + */ + +/* + * PCI Memory Space Map + */ +#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ +#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) +#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) +#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) +#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) +#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) +#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) + +/* Interrupt types */ +#define IOC4_SIO_INTR_TYPE 0 +#define IOC4_OTHER_INTR_TYPE 1 +#define IOC4_NUM_INTR_TYPES 2 + +/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ +#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ +#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ +#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ +#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ +#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ +#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ +#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ +#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ +#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ +#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ +#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ +#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ +#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ +#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ +#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ +#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ +#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ +#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ +#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ +#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ +#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ +#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ +#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ +#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ +#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ +#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ +#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ +#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ +#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ +#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ + +/* Per device interrupt masks */ +#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ + IOC4_SIO_IR_S0_RX_FULL | \ + IOC4_SIO_IR_S0_RX_HIGH | \ + IOC4_SIO_IR_S0_RX_TIMER | \ + IOC4_SIO_IR_S0_DELTA_DCD | \ + IOC4_SIO_IR_S0_DELTA_CTS | \ + IOC4_SIO_IR_S0_INT | \ + IOC4_SIO_IR_S0_TX_EXPLICIT) +#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ + IOC4_SIO_IR_S1_RX_FULL | \ + IOC4_SIO_IR_S1_RX_HIGH | \ + IOC4_SIO_IR_S1_RX_TIMER | \ + IOC4_SIO_IR_S1_DELTA_DCD | \ + IOC4_SIO_IR_S1_DELTA_CTS | \ + IOC4_SIO_IR_S1_INT | \ + IOC4_SIO_IR_S1_TX_EXPLICIT) +#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ + IOC4_SIO_IR_S2_RX_FULL | \ + IOC4_SIO_IR_S2_RX_HIGH | \ + IOC4_SIO_IR_S2_RX_TIMER | \ + IOC4_SIO_IR_S2_DELTA_DCD | \ + IOC4_SIO_IR_S2_DELTA_CTS | \ + IOC4_SIO_IR_S2_INT | \ + IOC4_SIO_IR_S2_TX_EXPLICIT) +#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ + IOC4_SIO_IR_S3_RX_FULL | \ + IOC4_SIO_IR_S3_RX_HIGH | \ + IOC4_SIO_IR_S3_RX_TIMER | \ + IOC4_SIO_IR_S3_DELTA_DCD | \ + IOC4_SIO_IR_S3_DELTA_CTS | \ + IOC4_SIO_IR_S3_INT | \ + IOC4_SIO_IR_S3_TX_EXPLICIT) + +/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ +#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ +#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ +#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ +#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ +#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ +#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ +#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */ +#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */ +#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */ +#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */ + +#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \ + IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR) + +/* Bitmasks for IOC4_SIO_CR */ +#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ +#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 +#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 +#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 +#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 +#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 +#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 +#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 +#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 +#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among + serial ports (ro) */ +/* Defs for some of the generic I/O pins */ +#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 + mode sel */ +#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 + mode sel */ +#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 + mode sel */ +#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 + mode sel */ + +#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling + uart 0 mode select */ +#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling + uart 1 mode select */ +#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling + uart 2 mode select */ +#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling + uart 3 mode select */ + +/* Bitmasks for serial RX status byte */ +#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ +#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ +#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ +#define IOC4_RXSB_BREAK 0x08 /* Break character */ +#define IOC4_RXSB_CTS 0x10 /* State of CTS */ +#define IOC4_RXSB_DCD 0x20 /* State of DCD */ +#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ +#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR + * & BREAK valid */ + +/* Bitmasks for serial TX control byte */ +#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ +#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ +#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ +#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ +#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ + +/* Bitmasks for IOC4_SBBR_L */ +#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ + +/* Bitmasks for IOC4_SSCR_<3:0> */ +#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ +#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ +#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ +#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ +#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ +#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ +#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ +#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ +#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ +#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ + +/* All producer/comsumer pointers are the same bitfield */ +#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ +#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ +#define IOC4_PROD_CONS_PTR_OFF 3 + +/* Bitmasks for IOC4_SRCIR_<3:0> */ +#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ + +/* Bitmasks for IOC4_SHADOW_<3:0> */ +#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ +#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ +#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ +#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ +#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ +#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ +#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ +#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ +#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ +#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ +#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ +#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ +#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ +#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ +#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ + +/* Bitmasks for IOC4_SRTR_<3:0> */ +#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ +#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ +#define IOC4_SRTR_CNT_VAL_SHIFT 16 +#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ + +/* Serial port register map used for DMA and PIO serial I/O */ +struct ioc4_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* IOC4 UART register map */ +struct ioc4_uartregs { + char i4u_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char i4u_scr; + char i4u_msr; + char i4u_lsr; + char i4u_mcr; +}; + +/* short names */ +#define i4u_dll u1.dll +#define i4u_ier u2.ier +#define i4u_dlm u2.dlm +#define i4u_fcr u3.fcr + +/* Serial port registers used for DMA serial I/O */ +struct ioc4_serial { + uint32_t sbbr01_l; + uint32_t sbbr01_h; + uint32_t sbbr23_l; + uint32_t sbbr23_h; + + struct ioc4_serialregs port_0; + struct ioc4_serialregs port_1; + struct ioc4_serialregs port_2; + struct ioc4_serialregs port_3; + struct ioc4_uartregs uart_0; + struct ioc4_uartregs uart_1; + struct ioc4_uartregs uart_2; + struct ioc4_uartregs uart_3; +} ioc4_serial; + +/* UART clock speed */ +#define IOC4_SER_XIN_CLK_66 66666667 +#define IOC4_SER_XIN_CLK_33 33333333 + +#define IOC4_W_IES 0 +#define IOC4_W_IEC 1 + +typedef void ioc4_intr_func_f(void *, uint32_t); +typedef ioc4_intr_func_f *ioc4_intr_func_t; + +static unsigned int Num_of_ioc4_cards; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* number of characters we want to transmit to the lower level at a time */ +#define IOC4_MAX_CHARS 256 +#define IOC4_FIFO_CHARS 255 + +/* Device name we're using */ +#define DEVICE_NAME_RS232 "ttyIOC" +#define DEVICE_NAME_RS422 "ttyAIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR_RS232 50 +#define DEVICE_MINOR_RS422 84 + + +/* register offsets */ +#define IOC4_SERIAL_OFFSET 0x300 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +#define PROTO_RS232 3 +#define PROTO_RS422 7 + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb) +#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw) + +/* Default to 4k buffers */ +#ifdef IOC4_1K_BUFFERS +#define RING_BUF_SIZE 1024 +#define IOC4_BUF_SIZE_BIT 0 +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K +#else +#define RING_BUF_SIZE 4096 +#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K +#endif + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* + * This is the entry saved by the driver - one per card + */ + +#define UART_PORT_MIN 0 +#define UART_PORT_RS232 UART_PORT_MIN +#define UART_PORT_RS422 1 +#define UART_PORT_COUNT 2 /* one for each mode */ + +struct ioc4_control { + int ic_irq; + struct { + /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ + struct uart_port icp_uart_port[UART_PORT_COUNT]; + /* Handy reference material */ + struct ioc4_port *icp_port; + } ic_port[IOC4_NUM_SERIAL_PORTS]; + struct ioc4_soft *ic_soft; +}; + +/* + * per-IOC4 data structure + */ +#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) +struct ioc4_soft { + struct ioc4_misc_regs __iomem *is_ioc4_misc_addr; + struct ioc4_serial __iomem *is_ioc4_serial_addr; + + /* Each interrupt type has an entry in the array */ + struct ioc4_intr_type { + + /* + * Each in-use entry in this array contains at least + * one nonzero bit in sd_bits; no two entries in this + * array have overlapping sd_bits values. + */ + struct ioc4_intr_info { + uint32_t sd_bits; + ioc4_intr_func_f *sd_intr; + void *sd_info; + } is_intr_info[MAX_IOC4_INTR_ENTS]; + + /* Number of entries active in the above array */ + atomic_t is_num_intrs; + } is_intr_type[IOC4_NUM_INTR_TYPES]; + + /* is_ir_lock must be held while + * modifying sio_ie values, so + * we can be sure that sio_ie is + * not changing when we read it + * along with sio_ir. + */ + spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ +}; + +/* Local port info for each IOC4 serial ports */ +struct ioc4_port { + struct uart_port *ip_port; /* current active port ptr */ + /* Ptrs for all ports */ + struct uart_port *ip_all_ports[UART_PORT_COUNT]; + /* Back ptrs for this port */ + struct ioc4_control *ip_control; + struct pci_dev *ip_pdev; + struct ioc4_soft *ip_ioc4_soft; + + /* pci mem addresses */ + struct ioc4_misc_regs __iomem *ip_mem; + struct ioc4_serial __iomem *ip_serial; + struct ioc4_serialregs __iomem *ip_serial_regs; + struct ioc4_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_ienb; /* Enabled interrupts */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + int ip_pci_bus_speed; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 +#define DCD_ON 0x02 +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 +#define PORT_ACTIVE 0x10 +#define PORT_INACTIVE 0 /* This is the value when "off" */ + + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_dma_error; + uint32_t intr_clear; + uint32_t intr_all; + int rs422_select_pin; +}; + +static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { + /* Values for port 0 */ + { + IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, + IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, + IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, + IOC4_OTHER_IR_S0_MEMERR, + (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | + IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | + IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | + IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), + IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, + }, + + /* Values for port 1 */ + { + IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, + IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, + IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, + IOC4_OTHER_IR_S1_MEMERR, + (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | + IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | + IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | + IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), + IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, + }, + + /* Values for port 2 */ + { + IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, + IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, + IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, + IOC4_OTHER_IR_S2_MEMERR, + (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | + IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | + IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | + IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), + IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, + }, + + /* Values for port 3 */ + { + IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, + IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, + IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, + IOC4_OTHER_IR_S3_MEMERR, + (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | + IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | + IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | + IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), + IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, + } +}; + +/* A ring buffer entry */ +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_0_OR_2; + struct ring RX_0_OR_2; + struct ring TX_1_OR_3; + struct ring RX_1_OR_3; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* Infinite loop detection. + */ +#define MAXITER 10000000 + +/* Prototypes */ +static void receive_chars(struct uart_port *); +static void handle_intr(void *arg, uint32_t sio_ir); + +/* + * port_is_active - determines if this port is currently active + * @port: ptr to soft struct for this port + * @uart_port: uart port to test for + */ +static inline int port_is_active(struct ioc4_port *port, + struct uart_port *uart_port) +{ + if (port) { + if ((port->ip_flags & PORT_ACTIVE) + && (port->ip_port == uart_port)) + return 1; + } + return 0; +} + + +/** + * write_ireg - write the interrupt regs + * @ioc4_soft: ptr to soft struct for this port + * @val: value to write + * @which: which register + * @type: which ireg set + */ +static inline void +write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) +{ + struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr; + unsigned long flags; + + spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->sio_ies.raw); + break; + + case IOC4_W_IEC: + writel(val, &mem->sio_iec.raw); + break; + } + break; + + case IOC4_OTHER_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->other_ies.raw); + break; + + case IOC4_W_IEC: + writel(val, &mem->other_iec.raw); + break; + } + break; + + default: + break; + } + spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); +} + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc4_port *port, int baud) +{ + int actual_baud; + int diff; + int lcr; + unsigned short divisor; + struct ioc4_uartregs __iomem *uart; + + divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); + if (!divisor) + return 1; + actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* If we're within 1%, we've found a match */ + if (diff * 100 > actual_baud) + return 1; + + uart = port->ip_uart_regs; + lcr = readb(&uart->i4u_lcr); + writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); + writeb((unsigned char)divisor, &uart->i4u_dll); + writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); + writeb(lcr, &uart->i4u_lcr); + return 0; +} + + +/** + * get_ioc4_port - given a uart port, return the control structure + * @port: uart port + * @set: set this port as current + */ +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) +{ + struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); + struct ioc4_control *control = idd->idd_serial_data; + struct ioc4_port *port; + int port_num, port_type; + + if (control) { + for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; + port_num++ ) { + port = control->ic_port[port_num].icp_port; + if (!port) + continue; + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + if (the_port == port->ip_all_ports + [port_type]) { + /* set local copy */ + if (set) { + port->ip_port = the_port; + } + return port; + } + } + } + } + return NULL; +} + +/* The IOC4 hardware provides no atomic way to determine if interrupts + * are pending since two reads are required to do so. The handler must + * read the SIO_IR and the SIO_IES, and take the logical and of the + * two. When this value is zero, all interrupts have been serviced and + * the handler may return. + * + * This has the unfortunate "hole" that, if some other CPU or + * some other thread or some higher level interrupt manages to + * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may + * think we have observed SIO_IR&SIO_IE==0 when in fact this + * condition never really occurred. + * + * To solve this, we use a simple spinlock that must be held + * whenever modifying SIO_IE; holding this lock while observing + * both SIO_IR and SIO_IE guarantees that we do not falsely + * conclude that no enabled interrupts are pending. + */ + +static inline uint32_t +pending_intrs(struct ioc4_soft *soft, int type) +{ + struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; + unsigned long flag; + uint32_t intrs = 0; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + spin_lock_irqsave(&soft->is_ir_lock, flag); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw); + break; + + case IOC4_OTHER_INTR_TYPE: + intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw); + + /* Don't process any ATA interrupte */ + intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + break; + + default: + break; + } + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + return intrs; +} + +/** + * port_init - Initialize the sio and ioc4 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc4_port *port) +{ + uint32_t sio_cr; + struct hooks *hooks = port->ip_hooks; + struct ioc4_uartregs __iomem *uart; + + /* Idle the IOC4 serial interface */ + writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do + sio_cr = readl(&port->ip_mem->sio_cr.raw); + while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->i4u_lcr); + writeb(0, &uart->i4u_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->i4u_fcr); + + /* Clear modem control register */ + writeb(0, &uart->i4u_mcr); + + /* Clear deltas in modem status register */ + readb(&uart->i4u_msr); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0] + || port->ip_hooks == &hooks_array[2]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l; + uint32_t __iomem *sbbr_h; + + if (port->ip_hooks == &hooks_array[0]) { + sbbr_l = &port->ip_serial->sbbr01_l; + sbbr_h = &port->ip_serial->sbbr01_h; + } else { + sbbr_l = &port->ip_serial->sbbr23_l; + sbbr_h = &port->ip_serial->sbbr23_h; + } + + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", + __func__, ring_pci_addr)); + + writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + write_ireg(port->ip_ioc4_soft, hooks->intr_clear, + IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~hooks->intr_clear; + writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw); + return 0; +} + +/** + * handle_dma_error_intr - service any pending DMA error interrupts for the + * given port - 2nd level called via sd_intr + * @arg: handler arg + * @other_ir: ioc4regs + */ +static void handle_dma_error_intr(void *arg, uint32_t other_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned long flags; + + spin_lock_irqsave(&port->ip_lock, flags); + + /* ACK the interrupt */ + writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw); + + if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) { + printk(KERN_ERR + "PCI error address is 0x%llx, " + "master is serial port %c %s\n", + (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) + << 32) + | readl(&port->ip_mem->pci_err_addr_l.raw)) + & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + + ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) & + IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), + (readl(&port->ip_mem->pci_err_addr_l.raw) + & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) + ? "RX" : "TX"); + + if (readl(&port->ip_mem->pci_err_addr_l.raw) + & IOC4_PCI_ERR_ADDR_MUL_ERR) { + printk(KERN_ERR + "Multiple errors occurred\n"); + } + } + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable DMA error interrupts */ + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, + IOC4_OTHER_INTR_TYPE); +} + +/** + * intr_connect - interrupt connect function + * @soft: soft struct for this card + * @type: interrupt type + * @intrbits: bit pattern to set + * @intr: handler function + * @info: handler arg + */ +static void +intr_connect(struct ioc4_soft *soft, int type, + uint32_t intrbits, ioc4_intr_func_f * intr, void *info) +{ + int i; + struct ioc4_intr_info *intr_ptr; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); + + /* Save off the lower level interrupt handler */ + intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; + intr_ptr->sd_bits = intrbits; + intr_ptr->sd_intr = intr; + intr_ptr->sd_info = info; +} + +/** + * ioc4_intr - Top level IOC4 interrupt handler. + * @irq: irq value + * @arg: handler arg + */ + +static irqreturn_t ioc4_intr(int irq, void *arg) +{ + struct ioc4_soft *soft; + uint32_t this_ir, this_mir; + int xx, num_intrs = 0; + int intr_type; + int handled = 0; + struct ioc4_intr_info *intr_info; + + soft = arg; + for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { + num_intrs = (int)atomic_read( + &soft->is_intr_type[intr_type].is_num_intrs); + + this_mir = this_ir = pending_intrs(soft, intr_type); + + /* Farm out the interrupt to the various drivers depending on + * which interrupt bits are set. + */ + for (xx = 0; xx < num_intrs; xx++) { + intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & intr_info->sd_bits)) { + /* Disable owned interrupts, call handler */ + handled++; + write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, + intr_type); + intr_info->sd_intr(intr_info->sd_info, this_mir); + this_ir &= ~this_mir; + } + } + } +#ifdef DEBUG_INTERRUPTS + { + struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; + unsigned long flag; + + spin_lock_irqsave(&soft->is_ir_lock, flag); + printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " + "other_ir 0x%x other_ies 0x%x mask 0x%x\n", + __func__, __LINE__, + (void *)mem, readl(&mem->sio_ir.raw), + readl(&mem->sio_ies.raw), + readl(&mem->other_ir.raw), + readl(&mem->other_ies.raw), + IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + } +#endif + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +/** + * ioc4_attach_local - Device initialization. + * Called at *_attach() time for each + * IOC4 with serial ports in the system. + * @idd: Master module data for this IOC4 + */ +static int inline ioc4_attach_local(struct ioc4_driver_data *idd) +{ + struct ioc4_port *port; + struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; + int port_number; + uint16_t ioc4_revid_min = 62; + uint16_t ioc4_revid; + struct pci_dev *pdev = idd->idd_pdev; + struct ioc4_control* control = idd->idd_serial_data; + struct ioc4_soft *soft = control->ic_soft; + void __iomem *ioc4_misc = idd->idd_misc_regs; + void __iomem *ioc4_serial = soft->is_ioc4_serial_addr; + + /* IOC4 firmware must be at least rev 62 */ + pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); + + printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); + if (ioc4_revid < ioc4_revid_min) { + printk(KERN_WARNING + "IOC4 serial not supported on firmware rev %d, " + "please upgrade to rev %d or higher\n", + ioc4_revid, ioc4_revid_min); + return -EPERM; + } + BUG_ON(ioc4_misc == NULL); + BUG_ON(ioc4_serial == NULL); + + /* Create port structures for each port */ + for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; + port_number++) { + port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC4 serial memory not available for port\n"); + return -ENOMEM; + } + spin_lock_init(&port->ip_lock); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[port_number] = port; + + /* Allocate buffers and jumpstart the hardware. */ + control->ic_port[port_number].icp_port = port; + port->ip_ioc4_soft = soft; + port->ip_pdev = pdev; + port->ip_ienb = 0; + /* Use baud rate calculations based on detected PCI + * bus speed. Simply test whether the PCI clock is + * running closer to 66MHz or 33MHz. + */ + if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) { + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66; + } else { + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33; + } + port->ip_baud = 9600; + port->ip_control = control; + port->ip_mem = ioc4_misc; + port->ip_serial = ioc4_serial; + + /* point to the right hook */ + port->ip_hooks = &hooks_array[port_number]; + + /* Get direct hooks to the serial regs and uart regs + * for this port + */ + switch (port_number) { + case 0: + port->ip_serial_regs = &(port->ip_serial->port_0); + port->ip_uart_regs = &(port->ip_serial->uart_0); + break; + case 1: + port->ip_serial_regs = &(port->ip_serial->port_1); + port->ip_uart_regs = &(port->ip_serial->uart_1); + break; + case 2: + port->ip_serial_regs = &(port->ip_serial->port_2); + port->ip_uart_regs = &(port->ip_serial->uart_2); + break; + default: + case 3: + port->ip_serial_regs = &(port->ip_serial->port_3); + port->ip_uart_regs = &(port->ip_serial->uart_3); + break; + } + + /* ring buffers are 1 to a pair of ports */ + if (port_number && (port_number & 1)) { + /* odd use the evens buffer */ + port->ip_dma_ringbuf = + ports[port_number - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[port_number - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_1_OR_3); + port->ip_outring = RING(port, TX_1_OR_3); + + } else { + if (port->ip_dma_ringbuf == 0) { + port->ip_cpu_ringbuf = pci_alloc_consistent + (pdev, TOTAL_RING_BUF_SIZE, + &port->ip_dma_ringbuf); + + } + BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf)); + port->ip_inring = RING(port, RX_0_OR_2); + port->ip_outring = RING(port, TX_0_OR_2); + } + DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", + __func__, + port_number, (void *)port, (void *)control)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC4 */ + port_init(port); + + DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __func__, + port_number, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + /* Attach interrupt handlers */ + intr_connect(soft, IOC4_SIO_INTR_TYPE, + GET_SIO_IR(port_number), + handle_intr, port); + + intr_connect(soft, IOC4_OTHER_INTR_TYPE, + GET_OTHER_IR(port_number), + handle_dma_error_intr, port); + } + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if ((port->ip_ienb & mask) != mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); + port->ip_ienb |= mask; + } + + if (port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IES, IOC4_OTHER_INTR_TYPE); +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc4_port *port) +{ + int spiniter = 0; + + port->ip_flags = PORT_ACTIVE; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs-> sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + port->ip_flags = PORT_INACTIVE; + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->i4u_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc4_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. + */ + threshold = timeout * port->ip_baud / 4000; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value + * again timeout * IOC4_SRTR_HZ / HZ + */ + timeout = timeout * IOC4_SRTR_HZ / 100; + if (timeout > IOC4_SRTR_CNT) + timeout = IOC4_SRTR_CNT; + + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc4_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", + __func__, baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->i4u_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->i4u_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, 2); + + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc4_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = IOC4_TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat + * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void disable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if (port->ip_ienb & mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, + IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~mask; + } + + if (!port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc4_port *port, int mask, int set_on) +{ + struct hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= IOC4_SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= IOC4_SSCR_DMA_EN; + else if (!(port->ip_ienb & hooks->intr_tx_mt)) + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, + int mask1, int mask2) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + mcr |= mask1; + shadow |= mask2; + + writeb(mcr, &port->ip_uart_regs->i4u_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc4_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc4_set_proto(struct ioc4_port *port, int proto) +{ + struct hooks *hooks = port->ip_hooks; + + switch (proto) { + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); + break; + + default: + return 1; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with ip_lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + struct uart_state *state; + + if (!the_port) + return; + if (!port) + return; + + state = the_port->state; + tty = state->port.tty; + + if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = state->xmit.head; + tail = state->xmit.tail; + start = (char *)&state->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + state->xmit.tail = tail; + start = (char *)&state->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&state->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc4_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc4_change_speed(struct uart_port *the_port, + struct ktermios *new_termios, struct ktermios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + int baud, bits; + unsigned cflag, iflag; + int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; + struct uart_state *state = the_port->state; + + cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + bits = 7; + break; + case CS6: + new_data = 6; + bits = 8; + break; + case CS7: + new_data = 7; + bits = 9; + break; + case CS8: + new_data = 8; + bits = 10; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + bits = 7; + break; + } + if (cflag & CSTOPB) { + bits++; + new_stop = 1; + } + if (cflag & PARENB) { + bits++; + new_parity_enable = 1; + if (cflag & PARODD) + new_parity = 1; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); + + /* default is 9600 */ + if (!baud) + baud = 9600; + + if (!the_port->fifosize) + the_port->fifosize = IOC4_FIFO_CHARS; + the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); + the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ + + the_port->ignore_status_mask = N_ALL_INPUT; + + state->port.tty->low_latency = 1; + + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (iflag & IGNBRK) { + the_port->ignore_status_mask &= ~N_BREAK; + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) { + port->ip_sscr |= IOC4_SSCR_HFC_EN; + } + else { + port->ip_sscr &= ~IOC4_SSCR_HFC_EN; + } + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " + "config_port(baud %d data %d stop %d p enable %d parity %d)," + " notification 0x%x\n", + __func__, (void *)port, cflag, baud, new_data, new_stop, + new_parity_enable, new_parity, the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic4_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic4_startup_local(struct uart_port *the_port) +{ + struct ioc4_port *port; + struct uart_state *state; + + if (!the_port) + return -1; + + port = get_ioc4_port(the_port, 0); + if (!port) + return -1; + + state = the_port->state; + + local_open(port); + + /* set the protocol - mapbase has the port type */ + ioc4_set_proto(port, the_port->mapbase); + + /* set the speed of the serial port */ + ioc4_change_speed(the_port, state->port.tty->termios, + (struct ktermios *)0); + + return 0; +} + +/* + * ioc4_cb_output_lowat - called when the output low water mark is hit + * @the_port: port to output + */ +static void ioc4_cb_output_lowat(struct uart_port *the_port) +{ + unsigned long pflags; + + /* ip_lock is set on the call here */ + if (the_port) { + spin_lock_irqsave(&the_port->lock, pflags); + transmit_chars(the_port); + spin_unlock_irqrestore(&the_port->lock, pflags); + } +} + +/** + * handle_intr - service any interrupts for the given port - 2nd level + * called via sd_intr + * @arg: handler arg + * @sio_ir: ioc4regs + */ +static void handle_intr(void *arg, uint32_t sio_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned long flags; + struct uart_port *the_port; + int loop_counter; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + sio_ir &= ~(hooks->intr_tx_mt); + + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on interrupt.\n"); + break; + } + + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + /* ACK the interrupt */ + writel(hooks->intr_delta_dcd, + &port->ip_mem->sio_ir.raw); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & IOC4_SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.dcd = 1; + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & IOC4_SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + /* ACK the interrupt */ + writel(hooks->intr_delta_cts, + &port->ip_mem->sio_ir.raw); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.cts = + (shadow & IOC4_SHADOW_CTS) ? 1 : 0; + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + /* ACK the interrupt */ + writel(hooks->intr_rx_timer, + &port->ip_mem->sio_ir.raw); + + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) + && port->ip_port) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { + if ((port->ip_flags & READ_ABORTED) == 0) { + port->ip_ienb &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } else { + rx_high_rd_aborted++; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + + /* ACK the interrupt */ + writel(hooks->intr_tx_explicit, + &port->ip_mem->sio_ir.raw); + + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc4_cb_output_lowat(port->ip_port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc4_cb_output_lowat(port->ip_port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(port); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & IOC4_SSCR_DMA_EN)); + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + + /* Prevent infinite tx_mt interrupt */ + port->ip_ienb &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(port); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable interrupts before returning from interrupt handler. + * Getting interrupted here is okay. It'll just v() our semaphore, and + * we'll come through the loop again. + */ + + write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); +} + +/* + * ioc4_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, unsigned char *buf, + int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + struct ring *inring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC4. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + IOC4_SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on read.\n"); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & IOC4_RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + + if ((port->ip_flags & DCD_ON) + && !(*sc & IOC4_RXSB_DCD)) { + + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + the_port->icount.dcd = 0; + wake_up_interruptible + (&the_port->state-> + port.delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & IOC4_RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & IOC4_RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc4_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & IOC4_RXSB_DATA_VALID) && + ((*sc & (IOC4_RXSB_PAR_ERR + | IOC4_RXSB_FRAME_ERR + | IOC4_RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & IOC4_RXSB_PAR_ERR) && + (port->ip_notify & N_PARITY_ERROR)) { + ioc4_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & IOC4_RXSB_FRAME_ERR) && + (port->ip_notify & N_FRAMING_ERROR)){ + ioc4_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & IOC4_RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc4_cb_post_ncs + (the_port, + NCS_BREAK); + } + len = 1; + } + } + if (*sc & IOC4_RXSB_DATA_VALID) { + *sc &= ~IOC4_RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < ((port->ip_sscr & + IOC4_SSCR_RX_THRESHOLD) + << IOC4_PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} + +/** + * receive_chars - upper level read. Called with ip_lock. + * @the_port: port to read from + */ +static void receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[IOC4_MAX_CHARS]; + int read_count, request_count = IOC4_MAX_CHARS; + struct uart_icount *icount; + struct uart_state *state = the_port->state; + unsigned long pflags; + + /* Make sure all the pointers are "good" ones */ + if (!state) + return; + if (!state->port.tty) + return; + + spin_lock_irqsave(&the_port->lock, pflags); + tty = state->port.tty; + + request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); + + if (request_count > 0) { + icount = &the_port->icount; + read_count = do_read(the_port, ch, request_count); + if (read_count > 0) { + tty_insert_flip_string(tty, ch, read_count); + icount->rx += read_count; + } + } + + spin_unlock_irqrestore(&the_port->lock, pflags); + + tty_flip_buffer_push(tty); +} + +/** + * ic4_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic4_type(struct uart_port *the_port) +{ + if (the_port->mapbase == PROTO_RS232) + return "SGI IOC4 Serial [rs232]"; + else + return "SGI IOC4 Serial [rs422]"; +} + +/** + * ic4_tx_empty - Is the transmitter empty? + * @port: Port to operate on + * + */ +static unsigned int ic4_tx_empty(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + unsigned int ret = 0; + + if (port_is_active(port, the_port)) { + if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) + ret = TIOCSER_TEMT; + } + return ret; +} + +/** + * ic4_stop_tx - stop the transmitter + * @port: Port to operate on + * + */ +static void ic4_stop_tx(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) + set_notification(port, N_OUTPUT_LOWAT, 0); +} + +/** + * null_void_function - + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic4_shutdown - shut down the port - free irq and disable + * @port: Port to shut down + * + */ +static void ic4_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc4_port *port; + struct uart_state *state; + + port = get_ioc4_port(the_port, 0); + if (!port) + return; + + state = the_port->state; + port->ip_port = NULL; + + wake_up_interruptible(&state->port.delta_msr_wait); + + if (state->port.tty) + set_bit(TTY_IO_ERROR, &state->port.tty->flags); + + spin_lock_irqsave(&the_port->lock, port_flags); + set_notification(port, N_ALL, 0); + port->ip_flags = PORT_INACTIVE; + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic4_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + struct ioc4_port *port; + + port = get_ioc4_port(the_port, 0); + if (!port_is_active(port, the_port)) + return; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, mcr, IOC4_SHADOW_DTR); +} + +/** + * ic4_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic4_get_mctrl(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + uint32_t shadow; + unsigned int ret = 0; + + if (!port_is_active(port, the_port)) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & IOC4_SHADOW_DCD) + ret |= TIOCM_CAR; + if (shadow & IOC4_SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & IOC4_SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic4_start_tx - Start transmitter, flush any output + * @port: Port to operate on + * + */ +static void ic4_start_tx(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) { + set_notification(port, N_OUTPUT_LOWAT, 1); + enable_intrs(port, port->ip_hooks->intr_tx_mt); + } +} + +/** + * ic4_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic4_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic4_startup - Start up the serial port + * @port: Port to operate on + * + */ +static int ic4_startup(struct uart_port *the_port) +{ + int retval; + struct ioc4_port *port; + struct ioc4_control *control; + struct uart_state *state; + unsigned long port_flags; + + if (!the_port) + return -ENODEV; + port = get_ioc4_port(the_port, 1); + if (!port) + return -ENODEV; + state = the_port->state; + + control = port->ip_control; + if (!control) { + port->ip_port = NULL; + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&the_port->lock, port_flags); + retval = ic4_startup_local(the_port); + spin_unlock_irqrestore(&the_port->lock, port_flags); + return retval; +} + +/** + * ic4_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic4_set_termios(struct uart_port *the_port, + struct ktermios *termios, struct ktermios *old_termios) +{ + unsigned long port_flags; + + spin_lock_irqsave(&the_port->lock, port_flags); + ioc4_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic4_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic4_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops ioc4_ops = { + .tx_empty = ic4_tx_empty, + .set_mctrl = ic4_set_mctrl, + .get_mctrl = ic4_get_mctrl, + .stop_tx = ic4_stop_tx, + .start_tx = ic4_start_tx, + .stop_rx = null_void_function, + .enable_ms = null_void_function, + .break_ctl = ic4_break_ctl, + .startup = ic4_startup, + .shutdown = ic4_shutdown, + .set_termios = ic4_set_termios, + .type = ic4_type, + .release_port = null_void_function, + .request_port = ic4_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc4_uart_rs232 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs232", + .dev_name = DEVICE_NAME_RS232, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS232, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + +static struct uart_driver ioc4_uart_rs422 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs422", + .dev_name = DEVICE_NAME_RS422, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS422, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + + +/** + * ioc4_serial_remove_one - detach function + * + * @idd: IOC4 master module data for this IOC4 + */ + +static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) +{ + int port_num, port_type; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + /* If serial driver did not attach, don't try to detach */ + control = idd->idd_serial_data; + if (!control) + return 0; + + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type]; + if (the_port) { + switch (port_type) { + case UART_PORT_RS422: + uart_remove_one_port(&ioc4_uart_rs422, + the_port); + break; + default: + case UART_PORT_RS232: + uart_remove_one_port(&ioc4_uart_rs232, + the_port); + break; + } + } + } + port = control->ic_port[port_num].icp_port; + /* we allocate in pairs */ + if (!(port_num & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, soft); + if (soft->is_ioc4_serial_addr) { + iounmap(soft->is_ioc4_serial_addr); + release_mem_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + idd->idd_serial_data = NULL; + + return 0; +} + + +/** + * ioc4_serial_core_attach_rs232 - register with serial core + * This is done during pci probing + * @pdev: handle for this card + */ +static inline int +ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) +{ + struct ioc4_port *port; + struct uart_port *the_port; + struct ioc4_driver_data *idd = pci_get_drvdata(pdev); + struct ioc4_control *control = idd->idd_serial_data; + int port_num; + int port_type_idx; + struct uart_driver *u_driver; + + + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", + __func__, pdev, (void *)control)); + + if (!control) + return -ENODEV; + + port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 + : UART_PORT_RS422; + + u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 + : &ioc4_uart_rs422; + + /* once around for each port on this card */ + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type_idx]; + port = control->ic_port[port_num].icp_port; + port->ip_all_ports[port_type_idx] = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", + __func__, (void *)the_port, + (void *)port, + port_type == PROTO_RS232 ? "rs232" : "rs422")); + + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->iobase = (pdev->bus->number << 16) | port_num; + the_port->line = (Num_of_ioc4_cards << 2) | port_num; + the_port->mapbase = port_type; + the_port->type = PORT_16550A; + the_port->fifosize = IOC4_FIFO_CHARS; + the_port->ops = &ioc4_ops; + the_port->irq = control->ic_irq; + the_port->dev = &pdev->dev; + spin_lock_init(&the_port->lock); + if (uart_add_one_port(u_driver, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d bus %d\n", + __func__, the_port->line, pdev->bus->number); + } else { + DPRINT_CONFIG( + ("IOC4 serial port %d irq = %d, bus %d\n", + the_port->line, the_port->irq, pdev->bus->number)); + } + } + return 0; +} + +/** + * ioc4_serial_attach_one - register attach function + * called per card found from IOC4 master module. + * @idd: Master module data for this IOC4 + */ +int +ioc4_serial_attach_one(struct ioc4_driver_data *idd) +{ + unsigned long tmp_addr1; + struct ioc4_serial __iomem *serial; + struct ioc4_soft *soft; + struct ioc4_control *control; + int ret = 0; + + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, + idd->idd_pci_id)); + + /* PCI-RT does not bring out serial connections. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + + /* request serial registers */ + tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; + + if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial), + "sioc4_uart")) { + printk(KERN_WARNING + "ioc4 (%p): unable to get request region for " + "uart space\n", (void *)idd->idd_pdev); + ret = -ENODEV; + goto out1; + } + serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); + if (!serial) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 serial register\n", + (void *)idd->idd_pdev); + ret = -ENODEV; + goto out2; + } + DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", + __func__, (void *)idd->idd_misc_regs, + (void *)serial)); + + /* Get memory for the new card */ + control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL); + + if (!control) { + printk(KERN_WARNING "ioc4_attach_one" + ": unable to get memory for the IOC4\n"); + ret = -ENOMEM; + goto out2; + } + idd->idd_serial_data = control; + + /* Allocate the soft structure */ + soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL); + if (!soft) { + printk(KERN_WARNING + "ioc4 (%p): unable to get memory for the soft struct\n", + (void *)idd->idd_pdev); + ret = -ENOMEM; + goto out3; + } + + spin_lock_init(&soft->is_ir_lock); + soft->is_ioc4_misc_addr = idd->idd_misc_regs; + soft->is_ioc4_serial_addr = serial; + + /* Init the IOC4 */ + writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, + &idd->idd_misc_regs->sio_cr.raw); + + /* Enable serial port mode select generic PIO pins as outputs */ + writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL + | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, + &idd->idd_misc_regs->gpcr_s.raw); + + /* Clear and disable all serial interrupts */ + write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + writel(~0, &idd->idd_misc_regs->sio_ir.raw); + write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC, + IOC4_OTHER_INTR_TYPE); + writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw); + control->ic_soft = soft; + + /* Hook up interrupt handler */ + if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED, + "sgi-ioc4serial", soft)) { + control->ic_irq = idd->idd_pdev->irq; + } else { + printk(KERN_WARNING + "%s : request_irq fails for IRQ 0x%x\n ", + __func__, idd->idd_pdev->irq); + } + ret = ioc4_attach_local(idd); + if (ret) + goto out4; + + /* register port with the serial core - 1 rs232, 1 rs422 */ + + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) + goto out4; + + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) + goto out5; + + Num_of_ioc4_cards++; + + return ret; + + /* error exits that give back resources */ +out5: + ioc4_serial_remove_one(idd); +out4: + kfree(soft); +out3: + kfree(control); +out2: + if (serial) + iounmap(serial); + release_mem_region(tmp_addr1, sizeof(struct ioc4_serial)); +out1: + + return ret; +} + + +static struct ioc4_submodule ioc4_serial_submodule = { + .is_name = "IOC4_serial", + .is_owner = THIS_MODULE, + .is_probe = ioc4_serial_attach_one, + .is_remove = ioc4_serial_remove_one, +}; + +/** + * ioc4_serial_init - module init + */ +static int __init ioc4_serial_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs232 IOC4 serial driver\n", + __func__); + goto out; + } + if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs422 IOC4 serial driver\n", + __func__); + goto out_uart_rs232; + } + + /* register with IOC4 main module */ + ret = ioc4_register_submodule(&ioc4_serial_submodule); + if (ret) + goto out_uart_rs422; + return 0; + +out_uart_rs422: + uart_unregister_driver(&ioc4_uart_rs422); +out_uart_rs232: + uart_unregister_driver(&ioc4_uart_rs232); +out: + return ret; +} + +static void __exit ioc4_serial_exit(void) +{ + ioc4_unregister_submodule(&ioc4_serial_submodule); + uart_unregister_driver(&ioc4_uart_rs232); + uart_unregister_driver(&ioc4_uart_rs422); +} + +late_initcall(ioc4_serial_init); /* Call only after tty init is done */ +module_exit(ioc4_serial_exit); + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c new file mode 100644 index 0000000..ebff4a1 --- /dev/null +++ b/drivers/tty/serial/ip22zilog.c @@ -0,0 +1,1221 @@ +/* + * Driver for Zilog serial chips found on SGI workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the + * old drivers/sgi/char/sgiserial.c code which itself is based of the original + * drivers/sbus/char/zs.c code. A lot of code has been simply moved over + * directly from there but much has been rewritten. Credits therefore go out + * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell + * for their work there. + * + * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "ip22zilog.h" + +/* + * On IP22 we need to delay after register accesses but we do not need to + * flush writes. + */ +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) + +#define NUM_IP22ZILOG 1 +#define NUM_CHANNELS (NUM_IP22ZILOG * 2) + +#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_ip22zilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_ip22zilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define IP22ZILOG_FLAG_IS_CONS 0x00000004 +#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 +#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 +#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 +#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 +#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 +#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 + + unsigned int tty_break; + + unsigned char parity_mask; + unsigned char prev_status; +}; + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) +#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ + (UART_ZILOG(PORT)->curregs[REGNUM]) +#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ + ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) +#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the IP22 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void ip22zilog_clear_fifo(struct zilog_channel *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + ip22zilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, regs[R15]); + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); + write_zsreg(channel, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= IP22ZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct tty_struct *tty; + unsigned char ch, flag; + unsigned int r1; + + tty = NULL; + if (up->port.state != NULL && + up->port.state->port.tty != NULL) + tty = up->port.state->port.tty; + + for (;;) { + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & Rx_CH_AV)) + break; + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + r1 |= up->tty_break; + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { + up->tty_break = 0; + + if (r1 & (Rx_SYS | Rx_BRK)) { + up->port.icount.brk++; + if (r1 & Rx_SYS) + continue; + r1 &= ~(PAR_ERR | CRC_ERR); + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & Rx_BRK) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if (tty) + uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); + } + return tty; +} + +static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (up->curregs[R15] & BRKIE) { + if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { + if (uart_handle_break(&up->port)) + up->tty_break = Rx_SYS; + else + up->tty_break = Rx_BRK; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) +{ + struct uart_ip22zilog_port *up = dev_id; + + while (up) { + struct zilog_channel *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + tty = ip22zilog_receive_chars(up, channel); + if (r3 & CHAEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHATxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + tty = ip22zilog_receive_chars(up, channel); + if (r3 & CHBEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHBTxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int ip22zilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = ip22zilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int ip22zilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = ip22zilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + + up->flags |= IP22ZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_start_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_rx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + ip22zilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void ip22zilog_enable_ms(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15]); + } +} + +/* The port lock is not held. */ +static void ip22zilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __ip22zilog_reset(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + int i; + + if (up->flags & IP22ZILOG_FLAG_RESET_DONE) + return; + + /* Let pending transmits finish. */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + if (!ZS_IS_CHANNEL_A(up)) { + up++; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + } + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + + up->flags |= IP22ZILOG_FLAG_RESET_DONE; + up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; +} + +static void __ip22zilog_startup(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + __ip22zilog_reset(up); + + __load_zsregs(channel, up->curregs); + /* set master interrupt enable */ + write_zsreg(channel, R9, up->curregs[R9]); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + ip22zilog_maybe_update_regs(up, channel); +} + +static int ip22zilog_startup(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __ip22zilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void ip22zilog_shutdown(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + ip22zilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[3] &= ~RxN_MASK; + up->curregs[5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[3] |= Rx5; + up->curregs[5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[3] |= Rx6; + up->curregs[5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[3] |= Rx7; + up->curregs[5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[3] |= Rx8; + up->curregs[5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[4] |= SB2; + else + up->curregs[4] |= SB1; + if (cflag & PARENB) + up->curregs[4] |= PAR_ENAB; + else + up->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[4] |= PAR_EVEN; + else + up->curregs[4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; + + ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *ip22zilog_type(struct uart_port *port) +{ + return "IP22-Zilog"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void ip22zilog_release_port(struct uart_port *port) +{ +} + +static int ip22zilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void ip22zilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops ip22zilog_pops = { + .tx_empty = ip22zilog_tx_empty, + .set_mctrl = ip22zilog_set_mctrl, + .get_mctrl = ip22zilog_get_mctrl, + .stop_tx = ip22zilog_stop_tx, + .start_tx = ip22zilog_start_tx, + .stop_rx = ip22zilog_stop_rx, + .enable_ms = ip22zilog_enable_ms, + .break_ctl = ip22zilog_break_ctl, + .startup = ip22zilog_startup, + .shutdown = ip22zilog_shutdown, + .set_termios = ip22zilog_set_termios, + .type = ip22zilog_type, + .release_port = ip22zilog_release_port, + .request_port = ip22zilog_request_port, + .config_port = ip22zilog_config_port, + .verify_port = ip22zilog_verify_port, +}; + +static struct uart_ip22zilog_port *ip22zilog_port_table; +static struct zilog_layout **ip22zilog_chip_regs; + +static struct uart_ip22zilog_port *ip22zilog_irq_chain; +static int zilog_irq = -1; + +static void * __init alloc_one_table(unsigned long size) +{ + return kzalloc(size, GFP_KERNEL); +} + +static void __init ip22zilog_alloc_tables(void) +{ + ip22zilog_port_table = (struct uart_ip22zilog_port *) + alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); + ip22zilog_chip_regs = (struct zilog_layout **) + alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); + + if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { + panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); + } +} + +/* Get the address of the registers for IP22-Zilog instance CHIP. */ +static struct zilog_layout * __init get_zs(int chip) +{ + unsigned long base; + + if (chip < 0 || chip >= NUM_IP22ZILOG) { + panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); + } + + /* Not probe-able, hard code it. */ + base = (unsigned long) &sgioc->uart; + + zilog_irq = SGI_SERIAL_IRQ; + request_mem_region(base, 8, "IP22-Zilog"); + + return (struct zilog_layout *) base; +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE +static void ip22zilog_put_char(struct uart_port *port, int ch) +{ + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static void +ip22zilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + uart_console_write(&up->port, s, count, ip22zilog_put_char); + udelay(2); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init ip22zilog_console_setup(struct console *con, char *options) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + int baud = 9600, bits = 8; + int parity = 'n'; + int flow = 'n'; + + up->flags |= IP22ZILOG_FLAG_IS_CONS; + + printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + + __ip22zilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(&up->port, con, baud, parity, bits, flow); +} + +static struct uart_driver ip22zilog_reg; + +static struct console ip22zilog_console = { + .name = "ttyS", + .write = ip22zilog_console_write, + .device = uart_console_device, + .setup = ip22zilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ip22zilog_reg, +}; +#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ + +static struct uart_driver ip22zilog_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = NUM_CHANNELS, +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE + .cons = &ip22zilog_console, +#endif +}; + +static void __init ip22zilog_prepare(void) +{ + struct uart_ip22zilog_port *up; + struct zilog_layout *rp; + int channel, chip; + + /* + * Temporary fix. + */ + for (channel = 0; channel < NUM_CHANNELS; channel++) + spin_lock_init(&ip22zilog_port_table[channel].port.lock); + + ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; + up = &ip22zilog_port_table[0]; + for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) + up[channel].next = &up[channel - 1]; + up[channel].next = NULL; + + for (chip = 0; chip < NUM_IP22ZILOG; chip++) { + if (!ip22zilog_chip_regs[chip]) { + ip22zilog_chip_regs[chip] = rp = get_zs(chip); + + up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; + up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; + + /* In theory mapbase is the physical address ... */ + up[(chip * 2) + 0].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelB, 8); + up[(chip * 2) + 1].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelA, 8); + } + + /* Channel A */ + up[(chip * 2) + 0].port.iotype = UPIO_MEM; + up[(chip * 2) + 0].port.irq = zilog_irq; + up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 0].port.fifosize = 1; + up[(chip * 2) + 0].port.ops = &ip22zilog_pops; + up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 0].port.flags = 0; + up[(chip * 2) + 0].port.line = (chip * 2) + 0; + up[(chip * 2) + 0].flags = 0; + + /* Channel B */ + up[(chip * 2) + 1].port.iotype = UPIO_MEM; + up[(chip * 2) + 1].port.irq = zilog_irq; + up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 1].port.fifosize = 1; + up[(chip * 2) + 1].port.ops = &ip22zilog_pops; + up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 1].port.line = (chip * 2) + 1; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; + } + + for (channel = 0; channel < NUM_CHANNELS; channel++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; + int brg; + + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R9] = NV | MIE; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + } +} + +static int __init ip22zilog_ports_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); + + ip22zilog_prepare(); + + if (request_irq(zilog_irq, ip22zilog_interrupt, 0, + "IP22-Zilog", ip22zilog_irq_chain)) { + panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); + } + + ret = uart_register_driver(&ip22zilog_reg); + if (ret == 0) { + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + + uart_add_one_port(&ip22zilog_reg, &up->port); + } + } + + return ret; +} + +static int __init ip22zilog_init(void) +{ + /* IP22 Zilog setup is hard coded, no probing to do. */ + ip22zilog_alloc_tables(); + ip22zilog_ports_init(); + + return 0; +} + +static void __exit ip22zilog_exit(void) +{ + int i; + struct uart_ip22zilog_port *up; + + for (i = 0; i < NUM_CHANNELS; i++) { + up = &ip22zilog_port_table[i]; + + uart_remove_one_port(&ip22zilog_reg, &up->port); + } + + /* Free IO mem */ + up = &ip22zilog_port_table[0]; + for (i = 0; i < NUM_IP22ZILOG; i++) { + if (up[(i * 2) + 0].port.mapbase) { + iounmap((void*)up[(i * 2) + 0].port.mapbase); + up[(i * 2) + 0].port.mapbase = 0; + } + if (up[(i * 2) + 1].port.mapbase) { + iounmap((void*)up[(i * 2) + 1].port.mapbase); + up[(i * 2) + 1].port.mapbase = 0; + } + } + + uart_unregister_driver(&ip22zilog_reg); +} + +module_init(ip22zilog_init); +module_exit(ip22zilog_exit); + +/* David wrote it but I'm to blame for the bugs ... */ +MODULE_AUTHOR("Ralf Baechle "); +MODULE_DESCRIPTION("SGI Zilog serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.h b/drivers/tty/serial/ip22zilog.h new file mode 100644 index 0000000..a59a9a8 --- /dev/null +++ b/drivers/tty/serial/ip22zilog.h @@ -0,0 +1,281 @@ +#ifndef _IP22_ZILOG_H +#define _IP22_ZILOG_H + +#include + +struct zilog_channel { +#ifdef __BIG_ENDIAN + volatile unsigned char unused0[3]; + volatile unsigned char control; + volatile unsigned char unused1[3]; + volatile unsigned char data; +#else /* __LITTLE_ENDIAN */ + volatile unsigned char control; + volatile unsigned char unused0[3]; + volatile unsigned char data; + volatile unsigned char unused1[3]; +#endif +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 16 + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _IP22_ZILOG_H */ diff --git a/drivers/tty/serial/jsm/Makefile b/drivers/tty/serial/jsm/Makefile new file mode 100644 index 0000000..e46b6e0 --- /dev/null +++ b/drivers/tty/serial/jsm/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for Jasmine adapter +# + +obj-$(CONFIG_SERIAL_JSM) += jsm.o + +jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o + diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h new file mode 100644 index 0000000..38a509c --- /dev/null +++ b/drivers/tty/serial/jsm/jsm.h @@ -0,0 +1,388 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ + +#ifndef __JSM_DRIVER_H +#define __JSM_DRIVER_H + +#include +#include /* To pick up the varions Linux types */ +#include +#include +#include + +/* + * Debugging levels can be set using debug insmod variable + * They can also be compiled out completely. + */ +enum { + DBG_INIT = 0x01, + DBG_BASIC = 0x02, + DBG_CORE = 0x04, + DBG_OPEN = 0x08, + DBG_CLOSE = 0x10, + DBG_READ = 0x20, + DBG_WRITE = 0x40, + DBG_IOCTL = 0x80, + DBG_PROC = 0x100, + DBG_PARAM = 0x200, + DBG_PSCAN = 0x400, + DBG_EVENT = 0x800, + DBG_DRAIN = 0x1000, + DBG_MSIGS = 0x2000, + DBG_MGMT = 0x4000, + DBG_INTR = 0x8000, + DBG_CARR = 0x10000, +}; + +#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ + if ((DBG_##nlevel & jsm_debug)) \ + dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) + +#define MAXLINES 256 +#define MAXPORTS 8 +#define MAX_STOPS_SENT 5 + +/* Board type definitions */ + +#define T_NEO 0000 +#define T_CLASSIC 0001 +#define T_PCIBUS 0400 + +/* Board State Definitions */ + +#define BD_RUNNING 0x0 +#define BD_REASON 0x7f +#define BD_NOTFOUND 0x1 +#define BD_NOIOPORT 0x2 +#define BD_NOMEM 0x3 +#define BD_NOBIOS 0x4 +#define BD_NOFEP 0x5 +#define BD_FAILED 0x6 +#define BD_ALLOCATED 0x7 +#define BD_TRIBOOT 0x8 +#define BD_BADKME 0x80 + + +/* 4 extra for alignment play space */ +#define WRITEBUFLEN ((4096) + 4) +#define MYFLIPLEN N_TTY_BUF_SIZE + +#define JSM_VERSION "jsm: 1.2-1-INKERNEL" +#define JSM_PARTNUM "40002438_A-INKERNEL" + +struct jsm_board; +struct jsm_channel; + +/************************************************************************ + * Per board operations structure * + ************************************************************************/ +struct board_ops { + irq_handler_t intr; + void (*uart_init) (struct jsm_channel *ch); + void (*uart_off) (struct jsm_channel *ch); + void (*param) (struct jsm_channel *ch); + void (*assert_modem_signals) (struct jsm_channel *ch); + void (*flush_uart_write) (struct jsm_channel *ch); + void (*flush_uart_read) (struct jsm_channel *ch); + void (*disable_receiver) (struct jsm_channel *ch); + void (*enable_receiver) (struct jsm_channel *ch); + void (*send_break) (struct jsm_channel *ch); + void (*clear_break) (struct jsm_channel *ch, int); + void (*send_start_character) (struct jsm_channel *ch); + void (*send_stop_character) (struct jsm_channel *ch); + void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); + u32 (*get_uart_bytes_left) (struct jsm_channel *ch); + void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); +}; + + +/* + * Per-board information + */ +struct jsm_board +{ + int boardnum; /* Board number: 0-32 */ + + int type; /* Type of board */ + u8 rev; /* PCI revision ID */ + struct pci_dev *pci_dev; + u32 maxports; /* MAX ports this board can handle */ + + spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and + * the interrupt routine from each other. + */ + + u32 nasync; /* Number of ports on card */ + + u32 irq; /* Interrupt request number */ + + u64 membase; /* Start of base memory of the card */ + u64 membase_end; /* End of base memory of the card */ + + u8 __iomem *re_map_membase;/* Remapped memory of the card */ + + u64 iobase; /* Start of io base of the card */ + u64 iobase_end; /* End of io base of the card */ + + u32 bd_uart_offset; /* Space between each UART */ + + struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ + char *flipbuf; /* Our flip buffer, alloced if board is found */ + + u32 bd_dividend; /* Board/UARTs specific dividend */ + + struct board_ops *bd_ops; + + struct list_head jsm_board_entry; +}; + +/************************************************************************ + * Device flag definitions for ch_flags. + ************************************************************************/ +#define CH_PRON 0x0001 /* Printer on string */ +#define CH_STOP 0x0002 /* Output is stopped */ +#define CH_STOPI 0x0004 /* Input is stopped */ +#define CH_CD 0x0008 /* Carrier is present */ +#define CH_FCAR 0x0010 /* Carrier forced on */ +#define CH_HANGUP 0x0020 /* Hangup received */ + +#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ +#define CH_OPENING 0x0080 /* Port in fragile open state */ +#define CH_CLOSING 0x0100 /* Port in fragile close state */ +#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ +#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ +#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ +#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ +#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ +#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ +#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ + +/* Our Read/Error/Write queue sizes */ +#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ +#define RQUEUESIZE (RQUEUEMASK + 1) +#define EQUEUESIZE RQUEUESIZE +#define WQUEUESIZE (WQUEUEMASK + 1) + + +/************************************************************************ + * Channel information structure. + ************************************************************************/ +struct jsm_channel { + struct uart_port uart_port; + struct jsm_board *ch_bd; /* Board structure pointer */ + + spinlock_t ch_lock; /* provide for serialization */ + wait_queue_head_t ch_flags_wait; + + u32 ch_portnum; /* Port number, 0 offset. */ + u32 ch_open_count; /* open count */ + u32 ch_flags; /* Channel flags */ + + u64 ch_close_delay; /* How long we should drop RTS/DTR for */ + + tcflag_t ch_c_iflag; /* channel iflags */ + tcflag_t ch_c_cflag; /* channel cflags */ + tcflag_t ch_c_oflag; /* channel oflags */ + tcflag_t ch_c_lflag; /* channel lflags */ + u8 ch_stopc; /* Stop character */ + u8 ch_startc; /* Start character */ + + u8 ch_mostat; /* FEP output modem status */ + u8 ch_mistat; /* FEP input modem status */ + + struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ + u8 ch_cached_lsr; /* Cached value of the LSR register */ + + u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ + u16 ch_r_head; /* Head location of the read queue */ + u16 ch_r_tail; /* Tail location of the read queue */ + + u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ + u16 ch_e_head; /* Head location of the error queue */ + u16 ch_e_tail; /* Tail location of the error queue */ + + u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ + u16 ch_w_head; /* Head location of the write queue */ + u16 ch_w_tail; /* Tail location of the write queue */ + + u64 ch_rxcount; /* total of data received so far */ + u64 ch_txcount; /* total of data transmitted so far */ + + u8 ch_r_tlevel; /* Receive Trigger level */ + u8 ch_t_tlevel; /* Transmit Trigger level */ + + u8 ch_r_watermark; /* Receive Watermark */ + + + u32 ch_stops_sent; /* How many times I have sent a stop character + * to try to stop the other guy sending. + */ + u64 ch_err_parity; /* Count of parity errors on channel */ + u64 ch_err_frame; /* Count of framing errors on channel */ + u64 ch_err_break; /* Count of breaks on channel */ + u64 ch_err_overrun; /* Count of overruns on channel */ + + u64 ch_xon_sends; /* Count of xons transmitted */ + u64 ch_xoff_sends; /* Count of xoffs transmitted */ +}; + + +/************************************************************************ + * Per channel/port NEO UART structure * + ************************************************************************ + * Base Structure Entries Usage Meanings to Host * + * * + * W = read write R = read only * + * U = Unused. * + ************************************************************************/ + +struct neo_uart_struct { + u8 txrx; /* WR RHR/THR - Holding Reg */ + u8 ier; /* WR IER - Interrupt Enable Reg */ + u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ + u8 lcr; /* WR LCR - Line Control Reg */ + u8 mcr; /* WR MCR - Modem Control Reg */ + u8 lsr; /* WR LSR - Line Status Reg */ + u8 msr; /* WR MSR - Modem Status Reg */ + u8 spr; /* WR SPR - Scratch Pad Reg */ + u8 fctr; /* WR FCTR - Feature Control Reg */ + u8 efr; /* WR EFR - Enhanced Function Reg */ + u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ + u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ + u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ + u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ + u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ + u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ + + u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ + u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ + u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ + u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ +}; + +/* Where to read the extended interrupt register (32bits instead of 8bits) */ +#define UART_17158_POLL_ADDR_OFFSET 0x80 + +/* + * These are the redefinitions for the FCTR on the XR17C158, since + * Exar made them different than their earlier design. (XR16C854) + */ + +/* These are only applicable when table D is selected */ +#define UART_17158_FCTR_RTS_NODELAY 0x00 +#define UART_17158_FCTR_RTS_4DELAY 0x01 +#define UART_17158_FCTR_RTS_6DELAY 0x02 +#define UART_17158_FCTR_RTS_8DELAY 0x03 +#define UART_17158_FCTR_RTS_12DELAY 0x12 +#define UART_17158_FCTR_RTS_16DELAY 0x05 +#define UART_17158_FCTR_RTS_20DELAY 0x13 +#define UART_17158_FCTR_RTS_24DELAY 0x06 +#define UART_17158_FCTR_RTS_28DELAY 0x14 +#define UART_17158_FCTR_RTS_32DELAY 0x07 +#define UART_17158_FCTR_RTS_36DELAY 0x16 +#define UART_17158_FCTR_RTS_40DELAY 0x08 +#define UART_17158_FCTR_RTS_44DELAY 0x09 +#define UART_17158_FCTR_RTS_48DELAY 0x10 +#define UART_17158_FCTR_RTS_52DELAY 0x11 + +#define UART_17158_FCTR_RTS_IRDA 0x10 +#define UART_17158_FCTR_RS485 0x20 +#define UART_17158_FCTR_TRGA 0x00 +#define UART_17158_FCTR_TRGB 0x40 +#define UART_17158_FCTR_TRGC 0x80 +#define UART_17158_FCTR_TRGD 0xC0 + +/* 17158 trigger table selects.. */ +#define UART_17158_FCTR_BIT6 0x40 +#define UART_17158_FCTR_BIT7 0x80 + +/* 17158 TX/RX memmapped buffer offsets */ +#define UART_17158_RX_FIFOSIZE 64 +#define UART_17158_TX_FIFOSIZE 64 + +/* 17158 Extended IIR's */ +#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ +#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ +#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ +#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ + +/* + * These are the extended interrupts that get sent + * back to us from the UART's 32bit interrupt register + */ +#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ +#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ +#define UART_17158_TXRDY 0x3 /* TX Ready */ +#define UART_17158_MSR 0x4 /* Modem State Change */ +#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ +#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ + +/* + * These are the EXTENDED definitions for the 17C158's Interrupt + * Enable Register. + */ +#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ +#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ +#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ +#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ +#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ + +#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ +#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ + +#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ +#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ +#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ +#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ + +#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" +#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" +#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" +#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" +#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" + +/* + * Our Global Variables. + */ +extern struct uart_driver jsm_uart_driver; +extern struct board_ops jsm_neo_ops; +extern int jsm_debug; + +/************************************************************************* + * + * Prototypes for non-static functions used in more than one module + * + *************************************************************************/ +int jsm_tty_write(struct uart_port *port); +int jsm_tty_init(struct jsm_board *); +int jsm_uart_port_init(struct jsm_board *); +int jsm_remove_uart_port(struct jsm_board *); +void jsm_input(struct jsm_channel *ch); +void jsm_check_queue_flow_control(struct jsm_channel *ch); + +#endif diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c new file mode 100644 index 0000000..18f5484 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -0,0 +1,297 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + * + ***********************************************************************/ +#include +#include +#include + +#include "jsm.h" + +MODULE_AUTHOR("Digi International, http://www.digi.com"); +MODULE_DESCRIPTION("Driver for the Digi International " + "Neo PCI based product line"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("jsm"); + +#define JSM_DRIVER_NAME "jsm" +#define NR_PORTS 32 +#define JSM_MINOR_START 0 + +struct uart_driver jsm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = JSM_DRIVER_NAME, + .dev_name = "ttyn", + .major = 0, + .minor = JSM_MINOR_START, + .nr = NR_PORTS, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); +static void jsm_io_resume(struct pci_dev *pdev); + +static struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; + +int jsm_debug; +module_param(jsm_debug, int, 0); +MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); + +static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc = 0; + struct jsm_board *brd; + static int adapter_count = 0; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "Device enable FAILED\n"); + goto out; + } + + rc = pci_request_regions(pdev, "jsm"); + if (rc) { + dev_err(&pdev->dev, "pci_request_region FAILED\n"); + goto out_disable_device; + } + + brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); + if (!brd) { + dev_err(&pdev->dev, + "memory allocation for board structure failed\n"); + rc = -ENOMEM; + goto out_release_regions; + } + + /* store the info for the board we've found */ + brd->boardnum = adapter_count++; + brd->pci_dev = pdev; + if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) + brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; + else + brd->maxports = 2; + + spin_lock_init(&brd->bd_intr_lock); + + /* store which revision we have */ + brd->rev = pdev->revision; + + brd->irq = pdev->irq; + + jsm_printk(INIT, INFO, &brd->pci_dev, + "jsm_found_board - NEO adapter\n"); + + /* get the PCI Base Address Registers */ + brd->membase = pci_resource_start(pdev, 0); + brd->membase_end = pci_resource_end(pdev, 0); + + if (brd->membase & 1) + brd->membase &= ~3; + else + brd->membase &= ~15; + + /* Assign the board_ops struct */ + brd->bd_ops = &jsm_neo_ops; + + brd->bd_uart_offset = 0x200; + brd->bd_dividend = 921600; + + brd->re_map_membase = ioremap(brd->membase, 0x1000); + if (!brd->re_map_membase) { + dev_err(&pdev->dev, + "card has no PCI Memory resources, " + "failing board.\n"); + rc = -ENOMEM; + goto out_kfree_brd; + } + + rc = request_irq(brd->irq, brd->bd_ops->intr, + IRQF_SHARED, "JSM", brd); + if (rc) { + printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); + goto out_iounmap; + } + + rc = jsm_tty_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + rc = jsm_uart_port_init(brd); + if (rc < 0) { + /* XXX: leaking all resources from jsm_tty_init here! */ + dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + /* Log the information about the board */ + dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n", + adapter_count, brd->rev, brd->irq); + + /* + * allocate flip buffer for board. + * + * Okay to malloc with GFP_KERNEL, we are not at interrupt + * context, and there are no locks held. + */ + brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL); + if (!brd->flipbuf) { + /* XXX: leaking all resources from jsm_tty_init and + jsm_uart_port_init here! */ + dev_err(&pdev->dev, "memory allocation for flipbuf failed\n"); + rc = -ENOMEM; + goto out_free_uart; + } + + pci_set_drvdata(pdev, brd); + pci_save_state(pdev); + + return 0; + out_free_uart: + jsm_remove_uart_port(brd); + out_free_irq: + jsm_remove_uart_port(brd); + free_irq(brd->irq, brd); + out_iounmap: + iounmap(brd->re_map_membase); + out_kfree_brd: + kfree(brd); + out_release_regions: + pci_release_regions(pdev); + out_disable_device: + pci_disable_device(pdev); + out: + return rc; +} + +static void __devexit jsm_remove_one(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + int i = 0; + + jsm_remove_uart_port(brd); + + free_irq(brd->irq, brd); + iounmap(brd->re_map_membase); + + /* Free all allocated channels structs */ + for (i = 0; i < brd->maxports; i++) { + if (brd->channels[i]) { + kfree(brd->channels[i]->ch_rqueue); + kfree(brd->channels[i]->ch_equeue); + kfree(brd->channels[i]->ch_wqueue); + kfree(brd->channels[i]); + } + } + + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(brd->flipbuf); + kfree(brd); +} + +static struct pci_device_id jsm_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); + +static struct pci_driver jsm_driver = { + .name = "jsm", + .id_table = jsm_pci_tbl, + .probe = jsm_probe_one, + .remove = __devexit_p(jsm_remove_one), + .err_handler = &jsm_err_handler, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + jsm_remove_uart_port(brd); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) +{ + int rc; + + rc = pci_enable_device(pdev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_set_master(pdev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void jsm_io_resume(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + pci_restore_state(pdev); + + jsm_uart_port_init(brd); +} + +static int __init jsm_init_module(void) +{ + int rc; + + rc = uart_register_driver(&jsm_uart_driver); + if (!rc) { + rc = pci_register_driver(&jsm_driver); + if (rc) + uart_unregister_driver(&jsm_uart_driver); + } + return rc; +} + +static void __exit jsm_exit_module(void) +{ + pci_unregister_driver(&jsm_driver); + uart_unregister_driver(&jsm_uart_driver); +} + +module_init(jsm_init_module); +module_exit(jsm_exit_module); diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c new file mode 100644 index 0000000..7960d96 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -0,0 +1,1412 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include /* For udelay */ +#include /* For the various UART offsets */ +#include +#include +#include + +#include "jsm.h" /* Driver main header file */ + +static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; + +/* + * This function allows calls to ensure that all outstanding + * PCI writes have been completed, by doing a PCI read against + * a non-destructive, read-only location on the Neo card. + * + * In this case, we are reading the DVID (Read-only Device Identification) + * value of the Neo card. + */ +static inline void neo_pci_posting_flush(struct jsm_board *bd) +{ + readb(bd->re_map_membase + 0x8D); +} + +static void neo_set_cts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); + + /* Turn on auto CTS flow control */ + ier |= (UART_17158_IER_CTSDSR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + efr &= ~(UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + + /* Feed the UART our trigger levels */ + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_rts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); + + /* Turn on auto RTS flow control */ + ier |= (UART_17158_IER_RTSDTR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + efr &= ~(UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(56, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 56; + + writeb(ier, &ch->ch_neo_uart->ier); + + /* + * From the Neo UART spec sheet: + * The auto RTS/DTR function must be started by asserting + * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after + * it is enabled. + */ + ch->ch_mostat |= (UART_MCR_RTS); +} + + +static void neo_set_ixon_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn on auto Xon flow control */ + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(32, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 32; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_ixoff_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn on auto Xoff flow control */ + ier |= (UART_17158_IER_XOFF); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_input_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + if (ch->ch_c_iflag & IXON) + efr &= ~(UART_17158_EFR_IXOFF); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_output_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + if (ch->ch_c_iflag & IXOFF) + efr &= ~(UART_17158_EFR_IXON); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) +{ + + /* if hardware flow control is set, then skip this whole thing */ + if (ch->ch_c_cflag & CRTSCTS) + return; + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); +} + +static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) +{ + int qleft = 0; + u8 linestatus = 0; + u8 error_mask = 0; + int n = 0; + int total = 0; + u16 head; + u16 tail; + + if (!ch) + return; + + /* cache head and tail of queue */ + head = ch->ch_r_head & RQUEUEMASK; + tail = ch->ch_r_tail & RQUEUEMASK; + + /* Get our cached LSR */ + linestatus = ch->ch_cached_lsr; + ch->ch_cached_lsr = 0; + + /* Store how much space we have left in the queue */ + if ((qleft = tail - head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * If the UART is not in FIFO mode, force the FIFO copy to + * NOT be run, by setting total to 0. + * + * On the other hand, if the UART IS in FIFO mode, then ask + * the UART to give us an approximation of data it has RX'ed. + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) + total = 0; + else { + total = readb(&ch->ch_neo_uart->rfifo); + + /* + * EXAR chip bug - RX FIFO COUNT - Fudge factor. + * + * This resolves a problem/bug with the Exar chip that sometimes + * returns a bogus value in the rfifo register. + * The count can be any where from 0-3 bytes "off". + * Bizarre, but true. + */ + total -= 3; + } + + /* + * Finally, bound the copy to make sure we don't overflow + * our own queue... + * The byte by byte copy loop below this loop this will + * deal with the queue overflow possibility. + */ + total = min(total, qleft); + + while (total > 0) { + /* + * Grab the linestatus register, we need to check + * to see if there are any errors in the FIFO. + */ + linestatus = readb(&ch->ch_neo_uart->lsr); + + /* + * Break out if there is a FIFO error somewhere. + * This will allow us to go byte by byte down below, + * finding the exact location of the error. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + break; + + /* Make sure we don't go over the end of our queue */ + n = min(((u32) total), (RQUEUESIZE - (u32) head)); + + /* + * Cut down n even further if needed, this is to fix + * a problem with memcpy_fromio() with the Neo on the + * IBM pSeries platform. + * 15 bytes max appears to be the magic number. + */ + n = min((u32) n, (u32) 12); + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + linestatus = 0; + + /* Copy data from uart to the queue */ + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); + /* + * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed + * that all the data currently in the FIFO is free of + * breaks and parity/frame/orun errors. + */ + memset(ch->ch_equeue + head, 0, n); + + /* Add to and flip head if needed */ + head = (head + n) & RQUEUEMASK; + total -= n; + qleft -= n; + ch->ch_rxcount += n; + } + + /* + * Create a mask to determine whether we should + * insert the character (if any) into our queue. + */ + if (ch->ch_c_iflag & IGNBRK) + error_mask |= UART_LSR_BI; + + /* + * Now cleanup any leftover bytes still in the UART. + * Also deal with any possible queue overflow here as well. + */ + while (1) { + + /* + * Its possible we have a linestatus from the loop above + * this, so we "OR" on any extra bits. + */ + linestatus |= readb(&ch->ch_neo_uart->lsr); + + /* + * If the chip tells us there is no more data pending to + * be read, we can then leave. + * But before we do, cache the linestatus, just in case. + */ + if (!(linestatus & UART_LSR_DR)) { + ch->ch_cached_lsr = linestatus; + break; + } + + /* No need to store this bit */ + linestatus &= ~UART_LSR_DR; + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { + linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + } + + /* + * Discard character if we are ignoring the error mask. + */ + if (linestatus & error_mask) { + u8 discard; + linestatus = 0; + memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); + continue; + } + + /* + * If our queue is full, we have no choice but to drop some data. + * The assumption is that HWFLOW or SWFLOW should have stopped + * things way way before we got to this point. + * + * I decided that I wanted to ditch the oldest data first, + * I hope thats okay with everyone? Yes? Good. + */ + while (qleft < 1) { + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Queue full, dropping DATA:%x LSR:%x\n", + ch->ch_rqueue[tail], ch->ch_equeue[tail]); + + ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; + ch->ch_err_overrun++; + qleft++; + } + + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); + ch->ch_equeue[head] = (u8) linestatus; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); + + /* Ditch any remaining linestatus value. */ + linestatus = 0; + + /* Add to and flip head if needed */ + head = (head + 1) & RQUEUEMASK; + + qleft--; + ch->ch_rxcount++; + } + + /* + * Write new final heads to channel structure. + */ + ch->ch_r_head = head & RQUEUEMASK; + ch->ch_e_head = head & EQUEUEMASK; + jsm_input(ch); +} + +static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) +{ + u16 head; + u16 tail; + int n; + int s; + int qlen; + u32 len_written = 0; + + if (!ch) + return; + + /* No data to write to the UART */ + if (ch->ch_w_tail == ch->ch_w_head) + return; + + /* If port is "stopped", don't send any data to the UART */ + if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) + return; + /* + * If FIFOs are disabled. Send data directly to txrx register + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) { + u8 lsrbits = readb(&ch->ch_neo_uart->lsr); + + ch->ch_cached_lsr |= lsrbits; + if (ch->ch_cached_lsr & UART_LSR_THRE) { + ch->ch_cached_lsr &= ~(UART_LSR_THRE); + + writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); + jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, + "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); + ch->ch_w_tail++; + ch->ch_w_tail &= WQUEUEMASK; + ch->ch_txcount++; + } + return; + } + + /* + * We have to do it this way, because of the EXAR TXFIFO count bug. + */ + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + return; + + n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; + + /* cache head and tail of queue */ + head = ch->ch_w_head & WQUEUEMASK; + tail = ch->ch_w_tail & WQUEUEMASK; + qlen = (head - tail) & WQUEUEMASK; + + /* Find minimum of the FIFO space, versus queue length */ + n = min(n, qlen); + + while (n > 0) { + + s = ((head >= tail) ? head : WQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); + /* Add and flip queue if needed */ + tail = (tail + s) & WQUEUEMASK; + n -= s; + ch->ch_txcount += s; + len_written += s; + } + + /* Update the final tail */ + ch->ch_w_tail = tail & WQUEUEMASK; + + if (len_written >= ch->ch_t_tlevel) + ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + if (!jsm_tty_write(&ch->uart_port)) + uart_write_wakeup(&ch->uart_port); +} + +static void neo_parse_modem(struct jsm_channel *ch, u8 signals) +{ + u8 msignals = signals; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); + + /* Scrub off lower bits. They signify delta's, which I don't care about */ + /* Keep DDCD and DDSR though */ + msignals &= 0xf8; + + if (msignals & UART_MSR_DDCD) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); + if (msignals & UART_MSR_DDSR) + uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); + if (msignals & UART_MSR_DCD) + ch->ch_mistat |= UART_MSR_DCD; + else + ch->ch_mistat &= ~UART_MSR_DCD; + + if (msignals & UART_MSR_DSR) + ch->ch_mistat |= UART_MSR_DSR; + else + ch->ch_mistat &= ~UART_MSR_DSR; + + if (msignals & UART_MSR_RI) + ch->ch_mistat |= UART_MSR_RI; + else + ch->ch_mistat &= ~UART_MSR_RI; + + if (msignals & UART_MSR_CTS) + ch->ch_mistat |= UART_MSR_CTS; + else + ch->ch_mistat &= ~UART_MSR_CTS; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + ch->ch_portnum, + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); +} + +/* Make the UART raise any of the output signals we want up */ +static void neo_assert_modem_signals(struct jsm_channel *ch) +{ + if (!ch) + return; + + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +/* + * Flush the WRITE FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_write(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 4) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); + udelay(10); + } + else + break; + } + + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +} + + +/* + * Flush the READ FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_read(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 2) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing RX UART... i: %d\n", i); + udelay(10); + } + else + break; + } +} + +/* + * No locks are assumed to be held when calling this function. + */ +static void neo_clear_break(struct jsm_channel *ch, int force) +{ + unsigned long lock_flags; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* Turn break off, and unset some variables */ + if (ch->ch_flags & CH_BREAK_SENDING) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); + + ch->ch_flags &= ~(CH_BREAK_SENDING); + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); +} + +/* + * Parse the ISR register. + */ +static inline void neo_parse_isr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + u8 isr; + u8 cause; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + /* Here we try to figure out what caused the interrupt to happen */ + while (1) { + + isr = readb(&ch->ch_neo_uart->isr_fcr); + + /* Bail if no pending interrupt */ + if (isr & UART_IIR_NO_INT) + break; + + /* + * Yank off the upper 2 bits, which just show that the FIFO's are enabled. + */ + isr &= ~(UART_17158_IIR_FIFO_ENABLED); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d isr: %x\n", __FILE__, __LINE__, isr); + + if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_IIR_THRI) { + /* Transfer data (if any) from Write Queue -> UART. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + neo_copy_data_from_queue_to_uart(ch); + } + + if (isr & UART_17158_IIR_XONXOFF) { + cause = readb(&ch->ch_neo_uart->xoffchar1); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); + + /* + * Since the UART detected either an XON or + * XOFF match, we need to figure out which + * one it was, so we can suspend or resume data flow. + */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if (cause == UART_17158_XON_DETECT) { + /* Is output stopped right now, if so, resume it */ + if (brd->channels[port]->ch_flags & CH_STOP) { + ch->ch_flags &= ~(CH_STOP); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. XON detected in incoming data\n", port); + } + else if (cause == UART_17158_XOFF_DETECT) { + if (!(brd->channels[port]->ch_flags & CH_STOP)) { + ch->ch_flags |= CH_STOP; + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Setting CH_STOP\n"); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port: %d. XOFF detected in incoming data\n", port); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { + /* + * If we get here, this means the hardware is doing auto flow control. + * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. + */ + cause = readb(&ch->ch_neo_uart->mcr); + + /* Which pin is doing auto flow? RTS or DTR? */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if ((cause & 0x4) == 0) { + if (cause & UART_MCR_RTS) + ch->ch_mostat |= UART_MCR_RTS; + else + ch->ch_mostat &= ~(UART_MCR_RTS); + } else { + if (cause & UART_MCR_DTR) + ch->ch_mostat |= UART_MCR_DTR; + else + ch->ch_mostat &= ~(UART_MCR_DTR); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* Parse any modem signal changes */ + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "MOD_STAT: sending to parse_modem_sigs\n"); + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + } +} + +static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + int linestatus; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + linestatus = readb(&ch->ch_neo_uart->lsr); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); + + ch->ch_cached_lsr |= linestatus; + + if (ch->ch_cached_lsr & UART_LSR_DR) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* + * This is a special flag. It indicates that at least 1 + * RX error (parity, framing, or break) has happened. + * Mark this in our struct, which will tell me that I have + *to do the special RX+LSR read for this FIFO load. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d Got an RX error, need to parse LSR\n", + __FILE__, __LINE__, port); + + /* + * The next 3 tests should *NOT* happen, as the above test + * should encapsulate all 3... At least, thats what Exar says. + */ + + if (linestatus & UART_LSR_PE) { + ch->ch_err_parity++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_FE) { + ch->ch_err_frame++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_BI) { + ch->ch_err_break++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_OE) { + /* + * Rx Oruns. Exar says that an orun will NOT corrupt + * the FIFO. It will just replace the holding register + * with this new data byte. So basically just ignore this. + * Probably we should eventually have an orun stat in our driver... + */ + ch->ch_err_overrun++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_THRE) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } + else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } +} + +/* + * neo_param() + * Send any/all changes to the line to the UART. + */ +static void neo_param(struct jsm_channel *ch) +{ + u8 lcr = 0; + u8 uart_lcr, ier; + u32 baud; + int quot; + struct jsm_board *bd; + + bd = ch->ch_bd; + if (!bd) + return; + + /* + * If baud rate is zero, flush queues, and set mval to drop DTR. + */ + if ((ch->ch_c_cflag & (CBAUD)) == 0) { + ch->ch_r_head = ch->ch_r_tail = 0; + ch->ch_e_head = ch->ch_e_tail = 0; + ch->ch_w_head = ch->ch_w_tail = 0; + + neo_flush_uart_write(ch); + neo_flush_uart_read(ch); + + ch->ch_flags |= (CH_BAUD0); + ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); + neo_assert_modem_signals(ch); + return; + + } else { + int i; + unsigned int cflag; + static struct { + unsigned int rate; + unsigned int cflag; + } baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 600, B600 }, + { 300, B300 }, + { 200, B200 }, + { 150, B150 }, + { 134, B134 }, + { 110, B110 }, + { 75, B75 }, + { 50, B50 }, + }; + + cflag = C_BAUD(ch->uart_port.state->port.tty); + baud = 9600; + for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { + if (baud_rates[i].cflag == cflag) { + baud = baud_rates[i].rate; + break; + } + } + + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + } + + if (ch->ch_c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + + if (!(ch->ch_c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + + /* + * Not all platforms support mark/space parity, + * so this will hide behind an ifdef. + */ +#ifdef CMSPAR + if (ch->ch_c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + + if (ch->ch_c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + switch (ch->ch_c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + break; + case CS8: + default: + lcr |= UART_LCR_WLEN8; + break; + } + + ier = readb(&ch->ch_neo_uart->ier); + uart_lcr = readb(&ch->ch_neo_uart->lcr); + + if (baud == 0) + baud = 9600; + + quot = ch->ch_bd->bd_dividend / baud; + + if (quot != 0) { + writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); + writeb((quot & 0xff), &ch->ch_neo_uart->txrx); + writeb((quot >> 8), &ch->ch_neo_uart->ier); + writeb(lcr, &ch->ch_neo_uart->lcr); + } + + if (uart_lcr != lcr) + writeb(lcr, &ch->ch_neo_uart->lcr); + + if (ch->ch_c_cflag & CREAD) + ier |= (UART_IER_RDI | UART_IER_RLSI); + + ier |= (UART_IER_THRI | UART_IER_MSI); + + writeb(ier, &ch->ch_neo_uart->ier); + + /* Set new start/stop chars */ + neo_set_new_start_stop_chars(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_cts_flow_control(ch); + else if (ch->ch_c_iflag & IXON) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_output_flow_control(ch); + else + neo_set_ixon_flow_control(ch); + } + else + neo_set_no_output_flow_control(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_rts_flow_control(ch); + else if (ch->ch_c_iflag & IXOFF) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_input_flow_control(ch); + else + neo_set_ixoff_flow_control(ch); + } + else + neo_set_no_input_flow_control(ch); + /* + * Adjust the RX FIFO Trigger level if baud is less than 9600. + * Not exactly elegant, but this is needed because of the Exar chip's + * delay on firing off the RX FIFO interrupt on slower baud rates. + */ + if (baud < 9600) { + writeb(1, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 1; + } + + neo_assert_modem_signals(ch); + + /* Get current status of the modem signals now */ + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + return; +} + +/* + * jsm_neo_intr() + * + * Neo specific interrupt handler. + */ +static irqreturn_t neo_intr(int irq, void *voidbrd) +{ + struct jsm_board *brd = voidbrd; + struct jsm_channel *ch; + int port = 0; + int type = 0; + int current_port; + u32 tmp; + u32 uart_poll; + unsigned long lock_flags; + unsigned long lock_flags2; + int outofloop_count = 0; + + /* Lock out the slow poller from running on this board. */ + spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); + + /* + * Read in "extended" IRQ information from the 32bit Neo register. + * Bits 0-7: What port triggered the interrupt. + * Bits 8-31: Each 3bits indicate what type of interrupt occurred. + */ + uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); + + if (!uart_poll) { + jsm_printk(INTR, INFO, &brd->pci_dev, + "Kernel interrupted to me, but no pending interrupts...\n"); + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + return IRQ_NONE; + } + + /* At this point, we have at least SOMETHING to service, dig further... */ + + current_port = 0; + + /* Loop on each port */ + while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ + + tmp = uart_poll; + outofloop_count++; + + /* Check current port to see if it has interrupt pending */ + if ((tmp & jsm_offset_table[current_port]) != 0) { + port = current_port; + type = tmp >> (8 + (port * 3)); + type &= 0x7; + } else { + current_port++; + continue; + } + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); + + /* Remove this port + type from uart_poll */ + uart_poll &= ~(jsm_offset_table[port]); + + if (!type) { + /* If no type, just ignore it, and move onto next port */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "Interrupt with no type! port: %d\n", port); + continue; + } + + /* Switch on type of interrupt we have */ + switch (type) { + + case UART_17158_RXRDY_TIMEOUT: + /* + * RXRDY Time-out is cleared by reading data in the + * RX FIFO until it falls below the trigger level. + */ + + /* Verify the port is in range. */ + if (port > brd->nasync) + continue; + + ch = brd->channels[port]; + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags2); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); + + continue; + + case UART_17158_RX_LINE_STATUS: + /* + * RXRDY and RX LINE Status (logic OR of LSR[4:1]) + */ + neo_parse_lsr(brd, port); + continue; + + case UART_17158_TXRDY: + /* + * TXRDY interrupt clears after reading ISR register for the UART channel. + */ + + /* + * Yes, this is odd... + * Why would I check EVERY possibility of type of + * interrupt, when we know its TXRDY??? + * Becuz for some reason, even tho we got triggered for TXRDY, + * it seems to be occassionally wrong. Instead of TX, which + * it should be, I was getting things like RXDY too. Weird. + */ + neo_parse_isr(brd, port); + continue; + + case UART_17158_MSR: + /* + * MSR or flow control was seen. + */ + neo_parse_isr(brd, port); + continue; + + default: + /* + * The UART triggered us with a bogus interrupt type. + * It appears the Exar chip, when REALLY bogged down, will throw + * these once and awhile. + * Its harmless, just ignore it and move on. + */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); + continue; + } + } + + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + + jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); + return IRQ_HANDLED; +} + +/* + * Neo specific way of turning off the receiver. + * Used as a way to enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_disable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp &= ~(UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + + +/* + * Neo specific way of turning on the receiver. + * Used as a way to un-enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_enable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp |= (UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +static void neo_send_start_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_startc != __DISABLED_CHAR) { + ch->ch_xon_sends++; + writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +static void neo_send_stop_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_stopc != __DISABLED_CHAR) { + ch->ch_xoff_sends++; + writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_uart_init + */ +static void neo_uart_init(struct jsm_channel *ch) +{ + writeb(0, &ch->ch_neo_uart->ier); + writeb(0, &ch->ch_neo_uart->efr); + writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); + + /* Clear out UART and FIFO */ + readb(&ch->ch_neo_uart->txrx); + writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + readb(&ch->ch_neo_uart->lsr); + readb(&ch->ch_neo_uart->msr); + + ch->ch_flags |= CH_FIFO_ENABLED; + + /* Assert any signals we want up */ + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); +} + +/* + * Make the UART completely turn off. + */ +static void neo_uart_off(struct jsm_channel *ch) +{ + /* Turn off UART enhanced bits */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Stop all interrupts from occurring. */ + writeb(0, &ch->ch_neo_uart->ier); +} + +static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) +{ + u8 left = 0; + u8 lsr = readb(&ch->ch_neo_uart->lsr); + + /* We must cache the LSR as some of the bits get reset once read... */ + ch->ch_cached_lsr |= lsr; + + /* Determine whether the Transmitter is empty or not */ + if (!(lsr & UART_LSR_TEMT)) + left = 1; + else { + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + left = 0; + } + + return left; +} + +/* Channel lock MUST be held by the calling function! */ +static void neo_send_break(struct jsm_channel *ch) +{ + /* + * Set the time we should stop sending the break. + * If we are already sending a break, toss away the existing + * time to stop, and use this new value instead. + */ + + /* Tell the UART to start sending the break */ + if (!(ch->ch_flags & CH_BREAK_SENDING)) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); + ch->ch_flags |= (CH_BREAK_SENDING); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_send_immediate_char. + * + * Sends a specific character as soon as possible to the UART, + * jumping over any bytes that might be in the write queue. + * + * The channel lock MUST be held by the calling function. + */ +static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) +{ + if (!ch) + return; + + writeb(c, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +struct board_ops jsm_neo_ops = { + .intr = neo_intr, + .uart_init = neo_uart_init, + .uart_off = neo_uart_off, + .param = neo_param, + .assert_modem_signals = neo_assert_modem_signals, + .flush_uart_write = neo_flush_uart_write, + .flush_uart_read = neo_flush_uart_read, + .disable_receiver = neo_disable_receiver, + .enable_receiver = neo_enable_receiver, + .send_break = neo_send_break, + .clear_break = neo_clear_break, + .send_start_character = neo_send_start_character, + .send_stop_character = neo_send_stop_character, + .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, + .get_uart_bytes_left = neo_get_uart_bytes_left, + .send_immediate_char = neo_send_immediate_char +}; diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c new file mode 100644 index 0000000..7a4a914 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -0,0 +1,910 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Ananda Venkatarman + * Modifications: + * 01/19/06: changed jsm_input routine to use the dynamically allocated + * tty_buffer changes. Contributors: Scott Kilau and Ananda V. + ***********************************************************************/ +#include +#include +#include +#include /* For udelay */ +#include +#include + +#include "jsm.h" + +static DECLARE_BITMAP(linemap, MAXLINES); + +static void jsm_carrier(struct jsm_channel *ch); + +static inline int jsm_get_mstat(struct jsm_channel *ch) +{ + unsigned char mstat; + unsigned result; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result = 0; + + if (mstat & UART_MCR_DTR) + result |= TIOCM_DTR; + if (mstat & UART_MCR_RTS) + result |= TIOCM_RTS; + if (mstat & UART_MSR_CTS) + result |= TIOCM_CTS; + if (mstat & UART_MSR_DSR) + result |= TIOCM_DSR; + if (mstat & UART_MSR_RI) + result |= TIOCM_RI; + if (mstat & UART_MSR_DCD) + result |= TIOCM_CD; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); + return result; +} + +static unsigned int jsm_tty_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +/* + * Return modem signals to ld. + */ +static unsigned int jsm_tty_get_mctrl(struct uart_port *port) +{ + int result; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + result = jsm_get_mstat(channel); + + if (result < 0) + return -ENXIO; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + + return result; +} + +/* + * jsm_set_modem_info() + * + * Set modem signals, called by ld. + */ +static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + if (mctrl & TIOCM_RTS) + channel->ch_mostat |= UART_MCR_RTS; + else + channel->ch_mostat &= ~UART_MCR_RTS; + + if (mctrl & TIOCM_DTR) + channel->ch_mostat |= UART_MCR_DTR; + else + channel->ch_mostat &= ~UART_MCR_DTR; + + channel->ch_bd->bd_ops->assert_modem_signals(channel); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + udelay(10); +} + +static void jsm_tty_start_tx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags &= ~(CH_STOP); + jsm_tty_write(port); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_stop_tx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags |= (CH_STOP); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_send_xchar(struct uart_port *port, char ch) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + struct ktermios *termios; + + spin_lock_irqsave(&port->lock, lock_flags); + termios = port->state->port.tty->termios; + if (ch == termios->c_cc[VSTART]) + channel->ch_bd->bd_ops->send_start_character(channel); + + if (ch == termios->c_cc[VSTOP]) + channel->ch_bd->bd_ops->send_stop_character(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static void jsm_tty_stop_rx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + channel->ch_bd->bd_ops->disable_receiver(channel); +} + +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + +static void jsm_tty_break(struct uart_port *port, int break_state) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + if (break_state == -1) + channel->ch_bd->bd_ops->send_break(channel); + else + channel->ch_bd->bd_ops->clear_break(channel, 0); + + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static int jsm_tty_open(struct uart_port *port) +{ + struct jsm_board *brd; + struct jsm_channel *channel = (struct jsm_channel *)port; + struct ktermios *termios; + + /* Get board pointer from our array of majors we have allocated */ + brd = channel->ch_bd; + + /* + * Allocate channel buffers for read/write/error. + * Set flag, so we don't get trounced on. + */ + channel->ch_flags |= (CH_OPENING); + + /* Drop locks, as malloc with GFP_KERNEL can sleep */ + + if (!channel->ch_rqueue) { + channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); + if (!channel->ch_rqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate read queue buf"); + return -ENOMEM; + } + } + if (!channel->ch_equeue) { + channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); + if (!channel->ch_equeue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate error queue buf"); + return -ENOMEM; + } + } + if (!channel->ch_wqueue) { + channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); + if (!channel->ch_wqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate write queue buf"); + return -ENOMEM; + } + } + + channel->ch_flags &= ~(CH_OPENING); + /* + * Initialize if neither terminal is open. + */ + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, + "jsm_open: initializing channel in open...\n"); + + /* + * Flush input queues. + */ + channel->ch_r_head = channel->ch_r_tail = 0; + channel->ch_e_head = channel->ch_e_tail = 0; + channel->ch_w_head = channel->ch_w_tail = 0; + + brd->bd_ops->flush_uart_write(channel); + brd->bd_ops->flush_uart_read(channel); + + channel->ch_flags = 0; + channel->ch_cached_lsr = 0; + channel->ch_stops_sent = 0; + + termios = port->state->port.tty->termios; + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + /* Tell UART to init itself */ + brd->bd_ops->uart_init(channel); + + /* + * Run param in case we changed anything + */ + brd->bd_ops->param(channel); + + jsm_carrier(channel); + + channel->ch_open_count++; + + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); + return 0; +} + +static void jsm_tty_close(struct uart_port *port) +{ + struct jsm_board *bd; + struct ktermios *ts; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); + + bd = channel->ch_bd; + ts = port->state->port.tty->termios; + + channel->ch_flags &= ~(CH_STOPI); + + channel->ch_open_count--; + + /* + * If we have HUPCL set, lower DTR and RTS + */ + if (channel->ch_c_cflag & HUPCL) { + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, + "Close. HUPCL set, dropping DTR/RTS\n"); + + /* Drop RTS/DTR */ + channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); + bd->bd_ops->assert_modem_signals(channel); + } + + /* Turn off UART interrupts for this port */ + channel->ch_bd->bd_ops->uart_off(channel); + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + channel->ch_bd->bd_ops->param(channel); + jsm_carrier(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static const char *jsm_tty_type(struct uart_port *port) +{ + return "jsm"; +} + +static void jsm_tty_release_port(struct uart_port *port) +{ +} + +static int jsm_tty_request_port(struct uart_port *port) +{ + return 0; +} + +static void jsm_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_JSM; +} + +static struct uart_ops jsm_ops = { + .tx_empty = jsm_tty_tx_empty, + .set_mctrl = jsm_tty_set_mctrl, + .get_mctrl = jsm_tty_get_mctrl, + .stop_tx = jsm_tty_stop_tx, + .start_tx = jsm_tty_start_tx, + .send_xchar = jsm_tty_send_xchar, + .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, + .break_ctl = jsm_tty_break, + .startup = jsm_tty_open, + .shutdown = jsm_tty_close, + .set_termios = jsm_tty_set_termios, + .type = jsm_tty_type, + .release_port = jsm_tty_release_port, + .request_port = jsm_tty_request_port, + .config_port = jsm_config_port, +}; + +/* + * jsm_tty_init() + * + * Init the tty subsystem. Called once per board after board has been + * downloaded and init'ed. + */ +int __devinit jsm_tty_init(struct jsm_board *brd) +{ + int i; + void __iomem *vaddr; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* + * Allocate channel memory that might not have been allocated + * when the driver was first loaded. + */ + for (i = 0; i < brd->nasync; i++) { + if (!brd->channels[i]) { + + /* + * Okay to malloc with GFP_KERNEL, we are not at + * interrupt context, and there are no locks held. + */ + brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); + if (!brd->channels[i]) { + jsm_printk(CORE, ERR, &brd->pci_dev, + "%s:%d Unable to allocate memory for channel struct\n", + __FILE__, __LINE__); + } + } + } + + ch = brd->channels[0]; + vaddr = brd->re_map_membase; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + spin_lock_init(&ch->ch_lock); + + if (brd->bd_uart_offset == 0x200) + ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); + + ch->ch_bd = brd; + ch->ch_portnum = i; + + /* .25 second delay */ + ch->ch_close_delay = 250; + + init_waitqueue_head(&ch->ch_flags_wait); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_uart_port_init(struct jsm_board *brd) +{ + int i, rc; + unsigned int line; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.uartclk = 14745600; + brd->channels[i]->uart_port.type = PORT_JSM; + brd->channels[i]->uart_port.iotype = UPIO_MEM; + brd->channels[i]->uart_port.membase = brd->re_map_membase; + brd->channels[i]->uart_port.fifosize = 16; + brd->channels[i]->uart_port.ops = &jsm_ops; + line = find_first_zero_bit(linemap, MAXLINES); + if (line >= MAXLINES) { + printk(KERN_INFO "jsm: linemap is full, added device failed\n"); + continue; + } else + set_bit(line, linemap); + brd->channels[i]->uart_port.line = line; + rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); + if (rc){ + printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); + return rc; + } + else + printk(KERN_INFO "jsm: Port %d added\n", i); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_remove_uart_port(struct jsm_board *brd) +{ + int i; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++) { + + if (!brd->channels[i]) + continue; + + ch = brd->channels[i]; + + clear_bit(ch->uart_port.line, linemap); + uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +void jsm_input(struct jsm_channel *ch) +{ + struct jsm_board *bd; + struct tty_struct *tp; + u32 rmask; + u16 head; + u16 tail; + int data_len; + unsigned long lock_flags; + int len = 0; + int n = 0; + int s = 0; + int i = 0; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + if (!ch) + return; + + tp = ch->uart_port.state->port.tty; + + bd = ch->ch_bd; + if(!bd) + return; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* + *Figure the number of characters in the buffer. + *Exit immediately if none. + */ + + rmask = RQUEUEMASK; + + head = ch->ch_r_head & rmask; + tail = ch->ch_r_tail & rmask; + + data_len = (head - tail) & rmask; + if (data_len == 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* + *If the device is not open, or CREAD is off, flush + *input data and return immediately. + */ + if (!tp || + !(tp->termios->c_cflag & CREAD) ) { + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); + ch->ch_r_head = tail; + + /* Force queue flow control to be released, if needed */ + jsm_check_queue_flow_control(ch); + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + /* + * If we are throttled, simply don't read any data. + */ + if (ch->ch_flags & CH_STOPI) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Port %d throttled, not reading any data. head: %x tail: %x\n", + ch->ch_portnum, head, tail); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); + + if (data_len <= 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); + return; + } + + len = tty_buffer_request_room(tp, data_len); + n = len; + + /* + * n now contains the most amount of data we can copy, + * bounded either by the flip buffer size or the amount + * of data the card actually has pending... + */ + while (n) { + s = ((head >= tail) ? head : RQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + /* + * If conditions are such that ld needs to see all + * UART errors, we will have to walk each character + * and error byte and send them to the buffer one at + * a time. + */ + + if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { + for (i = 0; i < s; i++) { + /* + * Give the Linux ld the flags in the + * format it likes. + */ + if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); + else + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); + } + } else { + tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; + } + tail += s; + n -= s; + /* Flip queue if needed */ + tail &= rmask; + } + + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Tell the tty layer its okay to "eat" the data now */ + tty_flip_buffer_push(tp); + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_carrier(struct jsm_channel *ch) +{ + struct jsm_board *bd; + + int virt_carrier = 0; + int phys_carrier = 0; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); + if (!ch) + return; + + bd = ch->ch_bd; + + if (!bd) + return; + + if (ch->ch_mistat & UART_MSR_DCD) { + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); + phys_carrier = 1; + } + + if (ch->ch_c_cflag & CLOCAL) + virt_carrier = 1; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); + + /* + * Test for a VIRTUAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: virt DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: physical DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL transition to low, so long as we aren't + * currently ignoring physical transitions (which is what "virtual + * carrier" indicates). + * + * The transition of the virtual carrier to low really doesn't + * matter... it really only means "ignore carrier state", not + * "make pretend that carrier is there". + */ + if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) + && (phys_carrier == 0)) { + /* + * When carrier drops: + * + * Drop carrier on all open units. + * + * Flush queues, waking up any task waiting in the + * line discipline. + * + * Send a hangup to the control terminal. + * + * Enable all select calls. + */ + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Make sure that our cached values reflect the current reality. + */ + if (virt_carrier == 1) + ch->ch_flags |= CH_FCAR; + else + ch->ch_flags &= ~CH_FCAR; + + if (phys_carrier == 1) + ch->ch_flags |= CH_CD; + else + ch->ch_flags &= ~CH_CD; +} + + +void jsm_check_queue_flow_control(struct jsm_channel *ch) +{ + struct board_ops *bd_ops = ch->ch_bd->bd_ops; + int qleft; + + /* Store how much space we have left in the queue */ + if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * Check to see if we should enforce flow control on our queue because + * the ld (or user) isn't reading data out of our queue fast enuf. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. + * This will cause the UART's FIFO to back up, and force + * the RTS signal to be dropped. + * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to + * the other side, in hopes it will stop sending data to us. + * 3) NONE - Nothing we can do. We will simply drop any extra data + * that gets sent into us when the queue fills up. + */ + if (qleft < 256) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if(!(ch->ch_flags & CH_RECEIVER_OFF)) { + bd_ops->disable_receiver(ch); + ch->ch_flags |= (CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF) { + if (ch->ch_stops_sent <= MAX_STOPS_SENT) { + bd_ops->send_stop_character(ch); + ch->ch_stops_sent++; + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); + } + } + } + + /* + * Check to see if we should unenforce flow control because + * ld (or user) finally read enuf data out of our queue. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. + * This will cause the UART's FIFO to raise RTS back up, + * which will allow the other side to start sending data again. + * 2) SWFLOW (IXOFF) - Send a start character to + * the other side, so it will start sending data to us again. + * 3) NONE - Do nothing. Since we didn't do anything to turn off the + * other side, we don't need to do anything now. + */ + if (qleft > (RQUEUESIZE / 2)) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if (ch->ch_flags & CH_RECEIVER_OFF) { + bd_ops->enable_receiver(ch); + ch->ch_flags &= ~(CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { + ch->ch_stops_sent = 0; + bd_ops->send_start_character(ch); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); + } + } +} + +/* + * jsm_tty_write() + * + * Take data from the user or kernel and send it out to the FEP. + * In here exists all the Transparent Print magic as well. + */ +int jsm_tty_write(struct uart_port *port) +{ + int bufcount; + int data_count = 0,data_count1 =0; + u16 head; + u16 tail; + u16 tmask; + u32 remain; + int temp_tail = port->state->xmit.tail; + struct jsm_channel *channel = (struct jsm_channel *)port; + + tmask = WQUEUEMASK; + head = (channel->ch_w_head) & tmask; + tail = (channel->ch_w_tail) & tmask; + + if ((bufcount = tail - head - 1) < 0) + bufcount += WQUEUESIZE; + + bufcount = min(bufcount, 56); + remain = WQUEUESIZE - head; + + data_count = 0; + if (bufcount >= remain) { + bufcount -= remain; + while ((port->state->xmit.head != temp_tail) && + (data_count < remain)) { + channel->ch_wqueue[head++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count++; + } + if (data_count == remain) head = 0; + } + + data_count1 = 0; + if (bufcount > 0) { + remain = bufcount; + while ((port->state->xmit.head != temp_tail) && + (data_count1 < remain)) { + channel->ch_wqueue[head++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count1++; + + } + } + + port->state->xmit.tail = temp_tail; + + data_count += data_count1; + if (data_count) { + head &= tmask; + channel->ch_w_head = head; + } + + if (data_count) { + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); + } + + return data_count; +} diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c new file mode 100644 index 0000000..25a8bc5 --- /dev/null +++ b/drivers/tty/serial/kgdboc.c @@ -0,0 +1,328 @@ +/* + * Based on the same principle as kgdboe using the NETPOLL api, this + * driver uses a console polling api to implement a gdb serial inteface + * which is multiplexed on a console port. + * + * Maintainer: Jason Wessel + * + * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_CONFIG_LEN 40 + +static struct kgdb_io kgdboc_io_ops; + +/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ +static int configured = -1; + +static char config[MAX_CONFIG_LEN]; +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_CONFIG_LEN, +}; + +static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ +static struct tty_driver *kgdb_tty_driver; +static int kgdb_tty_line; + +#ifdef CONFIG_KDB_KEYBOARD +static int kgdboc_reset_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + input_reset_device(dev); + + /* Retrun an error - we do not want to bind, just to reset */ + return -ENODEV; +} + +static void kgdboc_reset_disconnect(struct input_handle *handle) +{ + /* We do not expect anyone to actually bind to us */ + BUG(); +} + +static const struct input_device_id kgdboc_reset_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, + { } +}; + +static struct input_handler kgdboc_reset_handler = { + .connect = kgdboc_reset_connect, + .disconnect = kgdboc_reset_disconnect, + .name = "kgdboc_reset", + .id_table = kgdboc_reset_ids, +}; + +static DEFINE_MUTEX(kgdboc_reset_mutex); + +static void kgdboc_restore_input_helper(struct work_struct *dummy) +{ + /* + * We need to take a mutex to prevent several instances of + * this work running on different CPUs so they don't try + * to register again already registered handler. + */ + mutex_lock(&kgdboc_reset_mutex); + + if (input_register_handler(&kgdboc_reset_handler) == 0) + input_unregister_handler(&kgdboc_reset_handler); + + mutex_unlock(&kgdboc_reset_mutex); +} + +static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); + +static void kgdboc_restore_input(void) +{ + if (likely(system_state == SYSTEM_RUNNING)) + schedule_work(&kgdboc_restore_input_work); +} + +static int kgdboc_register_kbd(char **cptr) +{ + if (strncmp(*cptr, "kbd", 3) == 0) { + if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { + kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; + kdb_poll_idx++; + if (cptr[0][3] == ',') + *cptr += 4; + else + return 1; + } + } + return 0; +} + +static void kgdboc_unregister_kbd(void) +{ + int i; + + for (i = 0; i < kdb_poll_idx; i++) { + if (kdb_poll_funcs[i] == kdb_get_kbd_char) { + kdb_poll_idx--; + kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; + kdb_poll_funcs[kdb_poll_idx] = NULL; + i--; + } + } + flush_work_sync(&kgdboc_restore_input_work); +} +#else /* ! CONFIG_KDB_KEYBOARD */ +#define kgdboc_register_kbd(x) 0 +#define kgdboc_unregister_kbd() +#define kgdboc_restore_input() +#endif /* ! CONFIG_KDB_KEYBOARD */ + +static int kgdboc_option_setup(char *opt) +{ + if (strlen(opt) > MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + strcpy(config, opt); + + return 0; +} + +__setup("kgdboc=", kgdboc_option_setup); + +static void cleanup_kgdboc(void) +{ + kgdboc_unregister_kbd(); + if (configured == 1) + kgdb_unregister_io_module(&kgdboc_io_ops); +} + +static int configure_kgdboc(void) +{ + struct tty_driver *p; + int tty_line = 0; + int err; + char *cptr = config; + struct console *cons; + + err = kgdboc_option_setup(config); + if (err || !strlen(config) || isspace(config[0])) + goto noconfig; + + err = -ENODEV; + kgdboc_io_ops.is_console = 0; + kgdb_tty_driver = NULL; + + kgdboc_use_kms = 0; + if (strncmp(cptr, "kms,", 4) == 0) { + cptr += 4; + kgdboc_use_kms = 1; + } + + if (kgdboc_register_kbd(&cptr)) + goto do_register; + + p = tty_find_polling_driver(cptr, &tty_line); + if (!p) + goto noconfig; + + cons = console_drivers; + while (cons) { + int idx; + if (cons->device && cons->device(cons, &idx) == p && + idx == tty_line) { + kgdboc_io_ops.is_console = 1; + break; + } + cons = cons->next; + } + + kgdb_tty_driver = p; + kgdb_tty_line = tty_line; + +do_register: + err = kgdb_register_io_module(&kgdboc_io_ops); + if (err) + goto noconfig; + + configured = 1; + + return 0; + +noconfig: + config[0] = 0; + configured = 0; + cleanup_kgdboc(); + + return err; +} + +static int __init init_kgdboc(void) +{ + /* Already configured? */ + if (configured == 1) + return 0; + + return configure_kgdboc(); +} + +static int kgdboc_get_char(void) +{ + if (!kgdb_tty_driver) + return -1; + return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, + kgdb_tty_line); +} + +static void kgdboc_put_char(u8 chr) +{ + if (!kgdb_tty_driver) + return; + kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, + kgdb_tty_line, chr); +} + +static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) +{ + int len = strlen(kmessage); + + if (len >= MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + + /* Only copy in the string if the init function has not run yet */ + if (configured < 0) { + strcpy(config, kmessage); + return 0; + } + + if (kgdb_connected) { + printk(KERN_ERR + "kgdboc: Cannot reconfigure while KGDB is connected.\n"); + + return -EBUSY; + } + + strcpy(config, kmessage); + /* Chop out \n char as a result of echo */ + if (config[len - 1] == '\n') + config[len - 1] = '\0'; + + if (configured == 1) + cleanup_kgdboc(); + + /* Go and configure with the new params. */ + return configure_kgdboc(); +} + +static int dbg_restore_graphics; + +static void kgdboc_pre_exp_handler(void) +{ + if (!dbg_restore_graphics && kgdboc_use_kms) { + dbg_restore_graphics = 1; + con_debug_enter(vc_cons[fg_console].d); + } + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); +} + +static void kgdboc_post_exp_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); + if (kgdboc_use_kms && dbg_restore_graphics) { + dbg_restore_graphics = 0; + con_debug_leave(); + } + kgdboc_restore_input(); +} + +static struct kgdb_io kgdboc_io_ops = { + .name = "kgdboc", + .read_char = kgdboc_get_char, + .write_char = kgdboc_put_char, + .pre_exception = kgdboc_pre_exp_handler, + .post_exception = kgdboc_post_exp_handler, +}; + +#ifdef CONFIG_KGDB_SERIAL_CONSOLE +/* This is only available if kgdboc is a built in for early debugging */ +static int __init kgdboc_early_init(char *opt) +{ + /* save the first character of the config string because the + * init routine can destroy it. + */ + char save_ch; + + kgdboc_option_setup(opt); + save_ch = config[0]; + init_kgdboc(); + config[0] = save_ch; + return 0; +} + +early_param("ekgdboc", kgdboc_early_init); +#endif /* CONFIG_KGDB_SERIAL_CONSOLE */ + +module_init(init_kgdboc); +module_exit(cleanup_kgdboc); +module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdboc, "[,baud]"); +MODULE_DESCRIPTION("KGDB Console TTY Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c new file mode 100644 index 0000000..bea5c21 --- /dev/null +++ b/drivers/tty/serial/m32r_sio.c @@ -0,0 +1,1192 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PORT_M32R_BASE PORT_M32R_SIO +#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) +#define BAUD_RATE 115200 + +#include +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#define BASE_BAUD 115200 + +/* Standard COM flags */ +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, + [PORT_INDEX(PORT_M32R_SIO)] = { + .name = "M32RSIO", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, +}; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static void serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct circ_buf *xmit = &up->port.state->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void receive_chars(struct uart_sio_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned char flag; + int max_count = 256; + + do { + ch = sio_in(up, SIORXB); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + + if (*status & UART_LSR_OE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = res->end - res->start + 1; + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int flags) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config)) + return -EINVAL; + return 0; +} + +static const char * +m32r_sio_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .type = m32r_sio_type, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver\n"); + + for (i = 0; i < nr_irqs; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/m32r_sio.h new file mode 100644 index 0000000..e9b7e11 --- /dev/null +++ b/drivers/tty/serial/m32r_sio.h @@ -0,0 +1,48 @@ +/* + * m32r_sio.h + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.h. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +struct m32r_sio_probe { + struct module *owner; + int (*pci_init_one)(struct pci_dev *dev); + void (*pci_remove_one)(struct pci_dev *dev); + void (*pnp_init)(void); +}; + +int m32r_sio_register_probe(struct m32r_sio_probe *probe); +void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); +void m32r_sio_get_irq_map(unsigned int *map); +void m32r_sio_suspend_port(int line); +void m32r_sio_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; +}; + +#define _INLINE_ inline + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h new file mode 100644 index 0000000..4671473 --- /dev/null +++ b/drivers/tty/serial/m32r_sio_reg.h @@ -0,0 +1,152 @@ +/* + * m32r_sio_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * Copyright (C) 2004 Hirokazu Takata + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _M32R_SIO_REG_H +#define _M32R_SIO_REG_H + + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define SIOCR 0x000 +#define SIOMOD0 0x002 +#define SIOMOD1 0x004 +#define SIOSTS 0x006 +#define SIOTRCR 0x008 +#define SIOBAUR 0x00a +// #define SIORBAUR 0x018 +#define SIOTXB 0x00c +#define SIORXB 0x00e + +#define UART_RX ((unsigned long) PLD_ESIO0RXB) + /* In: Receive buffer (DLAB=0) */ +#define UART_TX ((unsigned long) PLD_ESIO0TXB) + /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER ((unsigned long) PLD_ESIO0INTCR) + /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR ((unsigned long) PLD_ESIO0STS) + /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define SIOCR 0x000 +#define SIOMOD0 0x004 +#define SIOMOD1 0x008 +#define SIOSTS 0x00c +#define SIOTRCR 0x010 +#define SIOBAUR 0x014 +#define SIORBAUR 0x018 +#define SIOTXB 0x01c +#define SIORXB 0x020 + +#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ +#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x02 /* Transmitter empty */ +#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x00 /* Break interrupt indicator */ +#define UART_LSR_FE 0x80 /* Frame error indicator */ +#define UART_LSR_PE 0x40 /* Parity error indicator */ +#define UART_LSR_OE 0x20 /* Overrun error indicator */ +#define UART_LSR_DR 0x04 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ + +#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c new file mode 100644 index 0000000..beb1afa --- /dev/null +++ b/drivers/tty/serial/max3100.c @@ -0,0 +1,926 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.state) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.state->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.state->port.tty != NULL) { + tty_flip_buffer_push(s->port.state->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.state->port.tty != NULL) + tty_flip_buffer_push(s->port.state->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_termios_baud_rate(termios); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.state->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:max3100"); diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c new file mode 100644 index 0000000..a1fe304 --- /dev/null +++ b/drivers/tty/serial/max3107-aava.c @@ -0,0 +1,344 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; + +/** + * max3107_aava_reset - reset on AAVA systems + * @spi: The SPI device we are probing + * + * Reset the device ready for probing. + */ + +static int max3107_aava_reset(struct spi_device *spi) +{ + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + return 0; +} + +static int max3107_aava_configure(struct max3107_port *s) +{ + int retval; + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = s->spi->modalias; + s->chip.dev = &s->spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + return 0; +} + +#if 0 +/* This will get enabled once we have the board stuff merged for this + specific case */ + +static const struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static void max3107_aava_init(struct max3107_port *s) +{ + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +} +#endif + +static int __devexit max3107_aava_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&spi->dev, "Removing GPIO chip failed\n"); + + /* Then do the default remove */ + return max3107_remove(spi); +} + +/* Platform data */ +static struct max3107_plat aava_plat_data = { + .loopback = 0, + .ext_clk = 1, +/* .init = max3107_aava_init, */ + .configure = max3107_aava_configure, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +static int __devinit max3107_probe_aava(struct spi_device *spi) +{ + int err = max3107_aava_reset(spi); + if (err < 0) + return err; + return max3107_probe(spi, &aava_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "aava-max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_aava, + .remove = __devexit_p(max3107_aava_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("aava-max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c new file mode 100644 index 0000000..910870e --- /dev/null +++ b/drivers/tty/serial/max3107.c @@ -0,0 +1,1213 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +static const struct baud_table brg26_ext[] = { + { 300, MAX3107_BRG26_B300 }, + { 600, MAX3107_BRG26_B600 }, + { 1200, MAX3107_BRG26_B1200 }, + { 2400, MAX3107_BRG26_B2400 }, + { 4800, MAX3107_BRG26_B4800 }, + { 9600, MAX3107_BRG26_B9600 }, + { 19200, MAX3107_BRG26_B19200 }, + { 57600, MAX3107_BRG26_B57600 }, + { 115200, MAX3107_BRG26_B115200 }, + { 230400, MAX3107_BRG26_B230400 }, + { 460800, MAX3107_BRG26_B460800 }, + { 921600, MAX3107_BRG26_B921600 }, + { 0, 0 } +}; + +static const struct baud_table brg13_int[] = { + { 300, MAX3107_BRG13_IB300 }, + { 600, MAX3107_BRG13_IB600 }, + { 1200, MAX3107_BRG13_IB1200 }, + { 2400, MAX3107_BRG13_IB2400 }, + { 4800, MAX3107_BRG13_IB4800 }, + { 9600, MAX3107_BRG13_IB9600 }, + { 19200, MAX3107_BRG13_IB19200 }, + { 57600, MAX3107_BRG13_IB57600 }, + { 115200, MAX3107_BRG13_IB115200 }, + { 230400, MAX3107_BRG13_IB230400 }, + { 460800, MAX3107_BRG13_IB460800 }, + { 921600, MAX3107_BRG13_IB921600 }, + { 0, 0 } +}; + +static u32 get_new_brg(int baud, struct max3107_port *s) +{ + int i; + const struct baud_table *baud_tbl = s->baud_tbl; + + for (i = 0; i < 13; i++) { + if (baud == baud_tbl[i].baud) + return baud_tbl[i].new_brg; + } + + return 0; +} + +/* Perform SPI transfer for write/read of device register(s) */ +int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +{ + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + /* Initialize SPI ,message */ + spi_message_init(&spi_msg); + + /* Initialize SPI transfer */ + memset(&spi_xfer, 0, sizeof spi_xfer); + spi_xfer.len = len; + spi_xfer.tx_buf = tx; + spi_xfer.rx_buf = rx; + spi_xfer.speed_hz = MAX3107_SPI_SPEED; + + /* Add SPI transfer to SPI message */ + spi_message_add_tail(&spi_xfer, &spi_msg); + +#ifdef DBG_TRACE_SPI_DATA + { + int i; + pr_info("tx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); + pr_info("\n"); + } +#endif + + /* Perform synchronous SPI transfer */ + if (spi_sync(s->spi, &spi_msg)) { + dev_err(&s->spi->dev, "spi_sync failure\n"); + return -EIO; + } + +#ifdef DBG_TRACE_SPI_DATA + if (spi_xfer.rx_buf) { + int i; + pr_info("rx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); + pr_info("\n"); + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(max3107_rw); + +/* Puts received data to circular buffer */ +static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, + int len) +{ + struct uart_port *port = &s->port; + struct tty_struct *tty; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Insert received data */ + tty_insert_flip_string(tty, data, len); + /* Update RX counter */ + port->icount.rx += len; +} + +/* Handle data receiving */ +static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) +{ + int i; + int j; + int len; /* SPI transfer buffer length */ + u16 *buf; + u8 *valid_str; + + if (!s->rx_enabled) + /* RX is disabled */ + return; + + if (rxlvl == 0) { + /* RX fifo is empty */ + return; + } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { + dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); + /* Ensure sanity of RX level */ + rxlvl = MAX3107_RX_FIFO_SIZE; + } + if ((s->rxbuf == 0) || (s->rxstr == 0)) { + dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); + return; + } + buf = s->rxbuf; + valid_str = s->rxstr; + while (rxlvl) { + pr_debug("rxlvl %d\n", rxlvl); + /* Clear buffer */ + memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); + len = 0; + if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { + /* First disable RX FIFO interrupt */ + pr_debug("Disabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + len++; + } + /* Just increase the length by amount of words in FIFO since + * buffer was zeroed and SPI transfer of 0x0000 means reading + * from RX FIFO + */ + len += rxlvl; + /* Append RX level query */ + buf[len] = MAX3107_RXFIFOLVL_REG; + len++; + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { + dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); + return; + } + + /* Skip RX FIFO interrupt disabling word if it was added */ + j = ((len - 1) - rxlvl); + /* Read received words */ + for (i = 0; i < rxlvl; i++, j++) + valid_str[i] = (u8)buf[j]; + put_data_to_circ_buf(s, valid_str, rxlvl); + /* Get new RX level */ + rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); + } + + if (s->rx_enabled) { + /* RX still enabled, re-enable RX FIFO interrupt */ + pr_debug("Enabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); + } + + /* Push the received data to receivers */ + if (s->port.state->port.tty) + tty_flip_buffer_push(s->port.state->port.tty); +} + + +/* Handle data sending */ +static void max3107_handletx(struct max3107_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + int i; + unsigned long flags; + int len; /* SPI transfer buffer length */ + u16 *buf; + + if (!s->tx_fifo_empty) + /* Don't send more data before previous data is sent */ + return; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + /* No data to send or TX is stopped */ + return; + + if (!s->txbuf) { + dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); + return; + } + buf = s->txbuf; + /* Get length of data pending in circular buffer */ + len = uart_circ_chars_pending(xmit); + if (len) { + /* Limit to size of TX FIFO */ + if (len > MAX3107_TX_FIFO_SIZE) + len = MAX3107_TX_FIFO_SIZE; + + pr_debug("txlen %d\n", len); + + /* Update TX counter */ + s->port.icount.tx += len; + + /* TX FIFO will no longer be empty */ + s->tx_fifo_empty = 0; + + i = 0; + if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { + /* First disable TX empty interrupt */ + pr_debug("Disabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + /* Add data to send */ + spin_lock_irqsave(&s->port.lock, flags); + for ( ; i < len ; i++) { + buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); + buf[i] |= ((u16)xmit->buf[xmit->tail] & + MAX3107_SPI_TX_DATA_MASK); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&s->port.lock, flags); + if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { + /* Enable TX empty interrupt */ + pr_debug("Enabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + if (!s->tx_enabled) { + /* Enable TX */ + pr_debug("Enable TX\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; + buf[i] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + s->tx_enabled = 1; + i++; + len++; + } + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { + dev_err(&s->spi->dev, + "SPI transfer TX handling failed\n"); + return; + } + } + + /* Indicate wake up if circular buffer is getting low on data */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + +} + +/* Handle interrupts + * Also reads and returns current RX FIFO level + */ +static u16 handle_interrupt(struct max3107_port *s) +{ + u16 buf[4]; /* Buffer for SPI transfers */ + u8 irq_status; + u16 rx_level; + unsigned long flags; + + /* Read IRQ status register */ + buf[0] = MAX3107_IRQSTS_REG; + /* Read status IRQ status register */ + buf[1] = MAX3107_STS_IRQSTS_REG; + /* Read LSR IRQ status register */ + buf[2] = MAX3107_LSR_IRQSTS_REG; + /* Query RX level */ + buf[3] = MAX3107_RXFIFOLVL_REG; + + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { + dev_err(&s->spi->dev, + "SPI transfer for INTR handling failed\n"); + return 0; + } + + irq_status = (u8)buf[0]; + pr_debug("IRQSTS %x\n", irq_status); + rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); + + if (irq_status & MAX3107_IRQ_LSR_BIT) { + /* LSR interrupt */ + if (buf[2] & MAX3107_LSR_RXTO_BIT) + /* RX timeout interrupt, + * handled by normal RX handling + */ + pr_debug("RX TO INT\n"); + } + + if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { + /* Tx empty interrupt, + * disable TX and set tx_fifo_empty flag + */ + pr_debug("TE INT, disabling TX\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); + s->tx_enabled = 0; + s->tx_fifo_empty = 1; + } + + if (irq_status & MAX3107_IRQ_RXFIFO_BIT) + /* RX FIFO interrupt, + * handled by normal RX handling + */ + pr_debug("RFIFO INT\n"); + + /* Return RX level */ + return rx_level; +} + +/* Trigger work thread*/ +static void max3107_dowork(struct max3107_port *s) +{ + if (!work_pending(&s->work) && !freezing(current) && !s->suspended) + queue_work(s->workqueue, &s->work); + else + dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); +} + +/* Work thread */ +static void max3107_work(struct work_struct *w) +{ + struct max3107_port *s = container_of(w, struct max3107_port, work); + u16 rxlvl = 0; + int len; /* SPI transfer buffer length */ + u16 buf[5]; /* Buffer for SPI transfers */ + unsigned long flags; + + /* Start by reading current RX FIFO level */ + buf[0] = MAX3107_RXFIFOLVL_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); + rxlvl = 0; + } else { + rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); + } + + do { + pr_debug("rxlvl %d\n", rxlvl); + + /* Handle RX */ + max3107_handlerx(s, rxlvl); + rxlvl = 0; + + if (s->handle_irq) { + /* Handle pending interrupts + * We also get new RX FIFO level since new data may + * have been received while pushing received data to + * receivers + */ + s->handle_irq = 0; + rxlvl = handle_interrupt(s); + } + + /* Handle TX */ + max3107_handletx(s); + + /* Handle configuration changes */ + len = 0; + spin_lock_irqsave(&s->data_lock, flags); + if (s->mode1_commit) { + pr_debug("mode1_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + buf[len++] |= s->mode1_reg; + s->mode1_commit = 0; + } + if (s->lcr_commit) { + pr_debug("lcr_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); + buf[len++] |= s->lcr_reg; + s->lcr_commit = 0; + } + if (s->brg_commit) { + pr_debug("brg_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); + buf[len++] |= ((s->brg_cfg >> 16) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); + buf[len++] |= ((s->brg_cfg >> 8) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); + buf[len++] |= ((s->brg_cfg) & 0xff); + s->brg_commit = 0; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + if (len > 0) { + if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) + dev_err(&s->spi->dev, + "SPI transfer config failed\n"); + } + + /* Reloop if interrupt handling indicated data in RX FIFO */ + } while (rxlvl); + +} + +/* Set sleep mode */ +static void max3107_set_sleep(struct max3107_port *s, int mode) +{ + u16 buf[1]; /* Buffer for SPI transfer */ + unsigned long flags; + pr_debug("enter, mode %d\n", mode); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + switch (mode) { + case MAX3107_DISABLE_FORCED_SLEEP: + s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_ENABLE_FORCED_SLEEP: + s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_DISABLE_AUTOSLEEP: + s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; + break; + case MAX3107_ENABLE_AUTOSLEEP: + s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; + break; + default: + spin_unlock_irqrestore(&s->data_lock, flags); + dev_warn(&s->spi->dev, "invalid sleep mode\n"); + return; + } + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); + + if (mode == MAX3107_DISABLE_AUTOSLEEP || + mode == MAX3107_DISABLE_FORCED_SLEEP) + msleep(MAX3107_WAKEUP_DELAY); +} + +/* Perform full register initialization */ +static void max3107_register_init(struct max3107_port *s) +{ + u16 buf[11]; /* Buffer for SPI transfers */ + + /* 1. Configure baud rate, 9600 as default */ + s->baud = 9600; + /* the below is default*/ + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG26_B9600; + s->baud_tbl = (struct baud_table *)brg26_ext; + } else { + s->brg_cfg = MAX3107_BRG13_IB9600; + s->baud_tbl = (struct baud_table *)brg13_int; + } + + if (s->pdata->init) + s->pdata->init(s); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) + | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); + buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) + | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); + buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) + | ((s->brg_cfg) & 0xff); + + /* 2. Configure LCR register, 8N1 mode by default */ + s->lcr_reg = MAX3107_LCR_WORD_LEN_8; + buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) + | s->lcr_reg; + + /* 3. Configure MODE 1 register */ + s->mode1_reg = 0; + /* Enable IRQ pin */ + s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; + /* Disable TX */ + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + s->tx_enabled = 0; + /* RX is enabled */ + s->rx_enabled = 1; + buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) + | s->mode1_reg; + + /* 4. Configure MODE 2 register */ + buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Enable loopback */ + buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; + } + /* Reset FIFOs */ + buf[5] |= MAX3107_MODE2_FIFORST_BIT; + s->tx_fifo_empty = 1; + + /* 5. Configure FIFO trigger level register */ + buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); + /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ + buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); + + /* 6. Configure flow control levels */ + buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); + /* Flow control halt level 96, resume level 48 */ + buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); + + /* 7. Configure flow control */ + buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); + /* Enable auto CTS and auto RTS flow control */ + buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); + + /* 8. Configure RX timeout register */ + buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); + /* Timeout after 48 character intervals */ + buf[9] |= 0x0030; + + /* 9. Configure LSR interrupt enable register */ + buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); + /* Enable RX timeout interrupt */ + buf[10] |= MAX3107_LSR_RXTO_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 22)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + + /* 10. Clear IRQ status register by reading it */ + buf[0] = MAX3107_IRQSTS_REG; + + /* 11. Configure interrupt enable register */ + /* Enable LSR interrupt */ + s->irqen_reg = MAX3107_IRQ_LSR_BIT; + /* Enable RX FIFO interrupt */ + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) + | s->irqen_reg; + + /* 12. Clear FIFO reset that was set in step 6 */ + buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Keep loopback enabled */ + buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; + } + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + +} + +/* IRQ handler */ +static irqreturn_t max3107_irq(int irqno, void *dev_id) +{ + struct max3107_port *s = dev_id; + + if (irqno != s->spi->irq) { + /* Unexpected IRQ */ + return IRQ_NONE; + } + + /* Indicate irq */ + s->handle_irq = 1; + + /* Trigger work thread */ + max3107_dowork(s); + + return IRQ_HANDLED; +} + +/* HW suspension function + * + * Currently autosleep is used to decrease current consumption, alternative + * approach would be to set the chip to reset mode if UART is not being + * used but that would mess the GPIOs + * + */ +void max3107_hw_susp(struct max3107_port *s, int suspend) +{ + pr_debug("enter, suspend %d\n", suspend); + + if (suspend) { + /* Suspend requested, + * enable autosleep to decrease current consumption + */ + s->suspended = 1; + max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); + } else { + /* Resume requested, + * disable autosleep + */ + s->suspended = 0; + max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); + } +} +EXPORT_SYMBOL_GPL(max3107_hw_susp); + +/* Modem status IRQ enabling */ +static void max3107_enable_ms(struct uart_port *port) +{ + /* Modem status not supported */ +} + +/* Data send function */ +static void max3107_start_tx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Trigger work thread for sending data */ + max3107_dowork(s); +} + +/* Function for checking that there is no pending transfers */ +static unsigned int max3107_tx_empty(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + pr_debug("returning %d\n", + (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); + return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); +} + +/* Function for stopping RX */ +static void max3107_stop_rx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + unsigned long flags; + + /* Set RX disabled in MODE 1 register */ + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; + s->mode1_commit = 1; + spin_unlock_irqrestore(&s->data_lock, flags); + /* Set RX disabled */ + s->rx_enabled = 0; + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Function for returning control pin states */ +static unsigned int max3107_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +/* Function for setting control pin states */ +static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* DCD and DSR are not wired and CTS/RTS is hadnled automatically + * so do nothing + */ +} + +/* Function for configuring UART parameters */ +static void max3107_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + struct tty_struct *tty; + int baud; + u16 new_lcr = 0; + u32 new_brg = 0; + unsigned long flags; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Get new LCR register values */ + /* Word size */ + if ((termios->c_cflag & CSIZE) == CS7) + new_lcr |= MAX3107_LCR_WORD_LEN_7; + else + new_lcr |= MAX3107_LCR_WORD_LEN_8; + + /* Parity */ + if (termios->c_cflag & PARENB) { + new_lcr |= MAX3107_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + new_lcr |= MAX3107_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) { + /* 2 stop bits */ + new_lcr |= MAX3107_LCR_STOPLEN_BIT; + } + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Set status ignore mask */ + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; + + /* Set low latency to immediately handle pushed data */ + s->port.state->port.tty->low_latency = 1; + + /* Get new baud rate generator configuration */ + baud = tty_get_baud_rate(tty); + + spin_lock_irqsave(&s->data_lock, flags); + new_brg = get_new_brg(baud, s); + /* if can't find the corrent config, use previous */ + if (!new_brg) { + baud = s->baud; + new_brg = s->brg_cfg; + } + spin_unlock_irqrestore(&s->data_lock, flags); + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock_irqsave(&s->data_lock, flags); + if (s->lcr_reg != new_lcr) { + s->lcr_reg = new_lcr; + s->lcr_commit = 1; + } + if (s->brg_cfg != new_brg) { + s->brg_cfg = new_brg; + s->brg_commit = 1; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Port shutdown function */ +static void max3107_shutdown(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + if (s->suspended && s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Free the interrupt */ + free_irq(s->spi->irq, s); + + if (s->workqueue) { + /* Flush and destroy work queue */ + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + + /* Suspend HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +} + +/* Port startup function */ +static int max3107_startup(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Initialize work queue */ + s->workqueue = create_freezeable_workqueue("max3107"); + if (!s->workqueue) { + dev_err(&s->spi->dev, "Workqueue creation failed\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3107_work); + + /* Setup IRQ */ + if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, + "max3107", s)) { + dev_err(&s->spi->dev, "IRQ reguest failed\n"); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + /* Resume HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Init registers */ + max3107_register_init(s); + + return 0; +} + +/* Port type function */ +static const char *max3107_type(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + return s->spi->modalias; +} + +/* Port release function */ +static void max3107_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port request function */ +static int max3107_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +/* Port config function */ +static void max3107_config_port(struct uart_port *port, int flags) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + s->port.type = PORT_MAX3107; +} + +/* Port verify function */ +static int max3107_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) + return 0; + + return -EINVAL; +} + +/* Port stop TX function */ +static void max3107_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port break control function */ +static void max3107_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support break control, do nothing */ +} + + +/* Port functions */ +static struct uart_ops max3107_ops = { + .tx_empty = max3107_tx_empty, + .set_mctrl = max3107_set_mctrl, + .get_mctrl = max3107_get_mctrl, + .stop_tx = max3107_stop_tx, + .start_tx = max3107_start_tx, + .stop_rx = max3107_stop_rx, + .enable_ms = max3107_enable_ms, + .break_ctl = max3107_break_ctl, + .startup = max3107_startup, + .shutdown = max3107_shutdown, + .set_termios = max3107_set_termios, + .type = max3107_type, + .release_port = max3107_release_port, + .request_port = max3107_request_port, + .config_port = max3107_config_port, + .verify_port = max3107_verify_port, +}; + +/* UART driver data */ +static struct uart_driver max3107_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .nr = 1, +}; + +static int driver_registered = 0; + + + +/* 'Generic' platform data */ +static struct max3107_plat generic_plat_data = { + .loopback = 0, + .ext_clk = 1, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +/*******************************************************************/ + +/** + * max3107_probe - SPI bus probe entry point + * @spi: the spi device + * + * SPI wants us to probe this device and if appropriate claim it. + * Perform any platform specific requirements and then initialise + * the device. + */ + +int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) +{ + struct max3107_port *s; + u16 buf[2]; /* Buffer for SPI transfers */ + int retval; + + pr_info("enter max3107 probe\n"); + + /* Allocate port structure */ + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) { + pr_err("Allocating port structure failed\n"); + return -ENOMEM; + } + + s->pdata = pdata; + + /* SPI Rx buffer + * +2 for RX FIFO interrupt + * disabling and RX level query + */ + s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); + if (!s->rxbuf) { + pr_err("Allocating RX buffer failed\n"); + retval = -ENOMEM; + goto err_free4; + } + s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); + if (!s->rxstr) { + pr_err("Allocating RX buffer failed\n"); + retval = -ENOMEM; + goto err_free3; + } + /* SPI Tx buffer + * SPI transfer buffer + * +3 for TX FIFO empty + * interrupt disabling and + * enabling and TX enabling + */ + s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); + if (!s->txbuf) { + pr_err("Allocating TX buffer failed\n"); + retval = -ENOMEM; + goto err_free2; + } + /* Initialize shared data lock */ + spin_lock_init(&s->data_lock); + + /* SPI intializations */ + dev_set_drvdata(&spi->dev, s); + spi->mode = SPI_MODE_0; + spi->dev.platform_data = pdata; + spi->bits_per_word = 16; + s->ext_clk = pdata->ext_clk; + s->loopback = pdata->loopback; + spi_setup(spi); + s->spi = spi; + + /* Check REV ID to ensure we are talking to what we expect */ + buf[0] = MAX3107_REVID_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); + retval = -EIO; + goto err_free1; + } + if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && + (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { + dev_err(&s->spi->dev, "REVID %x does not match\n", + (buf[0] & MAX3107_SPI_RX_DATA_MASK)); + retval = -ENODEV; + goto err_free1; + } + + /* Disable all interrupts */ + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); + buf[0] |= 0x0000; + + /* Configure clock source */ + buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); + if (s->ext_clk) { + /* External clock */ + buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; + } + + /* PLL bypass ON */ + buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + retval = -EIO; + goto err_free1; + } + + /* Register UART driver */ + if (!driver_registered) { + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + goto err_free1; + } + driver_registered = 1; + } + + /* Initialize UART port data */ + s->port.fifosize = 128; + s->port.ops = &max3107_ops; + s->port.line = 0; + s->port.dev = &spi->dev; + s->port.uartclk = 9600; + s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + s->port.irq = s->spi->irq; + s->port.type = PORT_MAX3107; + + /* Add UART port */ + retval = uart_add_one_port(&max3107_uart_driver, &s->port); + if (retval < 0) { + dev_err(&s->spi->dev, "Adding UART port failed\n"); + goto err_free1; + } + + if (pdata->configure) { + retval = pdata->configure(s); + if (retval < 0) + goto err_free1; + } + + /* Go to suspend mode */ + if (pdata->hw_suspend) + pdata->hw_suspend(s, 1); + + return 0; + +err_free1: + kfree(s->txbuf); +err_free2: + kfree(s->rxstr); +err_free3: + kfree(s->rxbuf); +err_free4: + kfree(s); + return retval; +} +EXPORT_SYMBOL_GPL(max3107_probe); + +/* Driver remove function */ +int max3107_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_info("enter max3107 remove\n"); + + /* Remove port */ + if (uart_remove_one_port(&max3107_uart_driver, &s->port)) + dev_warn(&s->spi->dev, "Removing UART port failed\n"); + + + /* Free TxRx buffer */ + kfree(s->rxbuf); + kfree(s->rxstr); + kfree(s->txbuf); + + /* Free port structure */ + kfree(s); + + return 0; +} +EXPORT_SYMBOL_GPL(max3107_remove); + +/* Driver suspend function */ +int max3107_suspend(struct spi_device *spi, pm_message_t state) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter suspend\n"); + + /* Suspend UART port */ + uart_suspend_port(&max3107_uart_driver, &s->port); + + /* Go to suspend mode */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_suspend); + +/* Driver resume function */ +int max3107_resume(struct spi_device *spi) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter resume\n"); + + /* Resume from suspend */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Resume UART port */ + uart_resume_port(&max3107_uart_driver, &s->port); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_resume); + +static int max3107_probe_generic(struct spi_device *spi) +{ + return max3107_probe(spi, &generic_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_generic, + .remove = __devexit_p(max3107_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + pr_info("enter max3107 init\n"); + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + pr_info("enter max3107 exit\n"); + /* Unregister UART driver */ + if (driver_registered) + uart_unregister_driver(&max3107_uart_driver); + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h new file mode 100644 index 0000000..7ab63239 --- /dev/null +++ b/drivers/tty/serial/max3107.h @@ -0,0 +1,441 @@ +/* + * max3107.h - spi uart protocol driver header for Maxim 3107 + * + * Copyright (C) Aavamobile 2009 + * Based on serial_max3100.h by Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX3107_H +#define _MAX3107_H + +/* Serial error status definitions */ +#define MAX3107_PARITY_ERROR 1 +#define MAX3107_FRAME_ERROR 2 +#define MAX3107_OVERRUN_ERROR 4 +#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ + MAX3107_FRAME_ERROR | \ + MAX3107_OVERRUN_ERROR) + +/* GPIO definitions */ +#define MAX3107_GPIO_BASE 88 +#define MAX3107_GPIO_COUNT 4 + + +/* GPIO connected to chip's reset pin */ +#define MAX3107_RESET_GPIO 87 + + +/* Chip reset delay */ +#define MAX3107_RESET_DELAY 10 + +/* Chip wakeup delay */ +#define MAX3107_WAKEUP_DELAY 50 + + +/* Sleep mode definitions */ +#define MAX3107_DISABLE_FORCED_SLEEP 0 +#define MAX3107_ENABLE_FORCED_SLEEP 1 +#define MAX3107_DISABLE_AUTOSLEEP 2 +#define MAX3107_ENABLE_AUTOSLEEP 3 + + +/* Definitions for register access with SPI transfers + * + * SPI transfer format: + * + * Master to slave bits xzzzzzzzyyyyyyyy + * Slave to master bits aaaaaaaabbbbbbbb + * + * where: + * x = 0 for reads, 1 for writes + * z = register address + * y = new register value if write, 0 if read + * a = unspecified + * b = register value if read, unspecified if write + */ + +/* SPI speed */ +#define MAX3107_SPI_SPEED (3125000 * 2) + +/* Write bit */ +#define MAX3107_WRITE_BIT (1 << 15) + +/* SPI TX data mask */ +#define MAX3107_SPI_RX_DATA_MASK (0x00ff) + +/* SPI RX data mask */ +#define MAX3107_SPI_TX_DATA_MASK (0x00ff) + +/* Register access masks */ +#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ +#define MAX3107_THR_REG (0x0000) /* TX FIFO */ +#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ +#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ +#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ +#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ +#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ +#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ +#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ +#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ +#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ +#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ +#define MAX3107_LCR_REG (0x0b00) /* LCR */ +#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ +#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ +#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ +#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ +#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ +#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ +#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ +#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ +#define MAX3107_XON1_REG (0x1400) /* XON1 character */ +#define MAX3107_XON2_REG (0x1500) /* XON2 character */ +#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ +#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ +#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ +#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ +#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ +#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ +#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ +#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ +#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ +#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ + +/* IRQ register bits */ +#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ +#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Status register bits */ +#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ +#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ +#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* MODE1 register bits */ +#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ +#define MAX3107_LCR_WORD_LEN_5 (0x0000) +#define MAX3107_LCR_WORD_LEN_6 (0x0001) +#define MAX3107_LCR_WORD_LEN_7 (0x0002) +#define MAX3107_LCR_WORD_LEN_8 (0x0003) + + +/* IRDA register bits */ +#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ +#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ +#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ +#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ +#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ +#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Flow control trigger level register masks */ +#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) +#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) +#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) + +/* Flow control register bits */ +#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* GPIO configuration register bits */ +#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ +#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ +#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ +#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ +#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ +#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ +#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ +#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ + +/* GPIO DATA register bits */ +#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ +#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ +#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ +#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ +#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ +#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ +#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ +#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ + +/* PLL configuration register masks */ +#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ +#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register masks and bits */ +#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of + * Baud rate generator divisor + */ +#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ +#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Clock source register bits */ +#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ +#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ +#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + + +/* HW definitions */ +#define MAX3107_RX_FIFO_SIZE 128 +#define MAX3107_TX_FIFO_SIZE 128 +#define MAX3107_REVID1 0x00a0 +#define MAX3107_REVID2 0x00a1 + + +/* Baud rate generator configuration values for external clock 13MHz */ +#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) +#define MAX3107_BRG13_B600 (0x054A00 | 0x03) +#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) +#define MAX3107_BRG13_B2400 (0x015200 | 0x09) +#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) +#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) +#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) +#define MAX3107_BRG13_B38400 (0x001500 | 0x03) +#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) +#define MAX3107_BRG13_B115200 (0x000700 | 0x01) +#define MAX3107_BRG13_B230400 (0x000300 | 0x08) +#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) +#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) + +/* Baud rate generator configuration values for external clock 26MHz */ +#define MAX3107_BRG26_B300 (0x152800 | 0x0A) +#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) +#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) +#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) +#define MAX3107_BRG26_B4800 (0x015200 | 0x09) +#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) +#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) +#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) +#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) +#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) +#define MAX3107_BRG26_B230400 (0x000700 | 0x01) +#define MAX3107_BRG26_B460800 (0x000300 | 0x08) +#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) + +/* Baud rate generator configuration values for internal clock */ +#define MAX3107_BRG13_IB300 (0x008000 | 0x00) +#define MAX3107_BRG13_IB600 (0x004000 | 0x00) +#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) +#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) +#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) +#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) +#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) +#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) +#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) +#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) +#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) +#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) +#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + +#if defined(CONFIG_GPIOLIB) + /* GPIO chip stucture */ + struct gpio_chip chip; +#endif + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; + + struct max3107_plat *pdata; /* Platform data */ +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* Called during the register initialisation */ + void (*init)(struct max3107_port *s); + /* Called when the port is found and configured */ + int (*configure)(struct max3107_port *s); + /* HW suspend function */ + void (*hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); +extern void max3107_hw_susp(struct max3107_port *s, int suspend); +extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); +extern int max3107_remove(struct spi_device *spi); +extern int max3107_suspend(struct spi_device *spi, pm_message_t state); +extern int max3107_resume(struct spi_device *spi); + +#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c new file mode 100644 index 0000000..3394b7c --- /dev/null +++ b/drivers/tty/serial/mcf.c @@ -0,0 +1,662 @@ +/****************************************************************************/ + +/* + * mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/****************************************************************************/ + +/* + * Some boards implement the DTR/DCD lines using GPIO lines, most + * don't. Dummy out the access macros for those that don't. Those + * that do should define these macros somewhere in there board + * specific inlude files. + */ +#if !defined(mcf_getppdcd) +#define mcf_getppdcd(p) (1) +#endif +#if !defined(mcf_getppdtr) +#define mcf_getppdtr(p) (1) +#endif +#if !defined(mcf_setppdtr) +#define mcf_setppdtr(p, v) do { } while (0) +#endif + +/****************************************************************************/ + +/* + * Local per-uart structure. + */ +struct mcf_uart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned char imr; /* Local IMR mirror */ +}; + +/****************************************************************************/ + +static unsigned int mcf_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? + TIOCSER_TEMT : 0; +} + +/****************************************************************************/ + +static unsigned int mcf_get_mctrl(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int sigs; + + sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? + 0 : TIOCM_CTS; + sigs |= (pp->sigs & TIOCM_RTS); + sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); + sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); + + return sigs; +} + +/****************************************************************************/ + +static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->sigs = sigs; + mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); + if (sigs & TIOCM_RTS) + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); + else + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); +} + +/****************************************************************************/ + +static void mcf_start_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr |= MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_rx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); + else + writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_enable_ms(struct uart_port *port) +{ +} + +/****************************************************************************/ + +static int mcf_startup(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Reset UART, get it into known state... */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + /* Enable the UART transmitter and receiver */ + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + + /* Enable RX interrupts now */ + pp->imr = MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +/****************************************************************************/ + +static void mcf_shutdown(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + /* Disable UART transmitter and receiver */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif + unsigned char mr1, mr2; + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else + baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + if (termios->c_cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (termios->c_cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); + writeb(mr1, port->membase + MCFUART_UMR); + writeb(mr2, port->membase + MCFUART_UMR); + writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); + writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif + writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, + port->membase + MCFUART_UCSR); + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_rx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char status, ch, flag; + + while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { + ch = readb(port->membase + MCFUART_URB); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & MCFUART_USR_RXERR) { + writeb(MCFUART_UCR_CMDRESETERR, + port->membase + MCFUART_UCR); + + if (status & MCFUART_USR_RXBREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & MCFUART_USR_RXPARITY) { + port->icount.parity++; + } else if (status & MCFUART_USR_RXOVERRUN) { + port->icount.overrun++; + } else if (status & MCFUART_USR_RXFRAMING) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & MCFUART_USR_RXBREAK) + flag = TTY_BREAK; + else if (status & MCFUART_USR_RXPARITY) + flag = TTY_PARITY; + else if (status & MCFUART_USR_RXFRAMING) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +/****************************************************************************/ + +static void mcf_tx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + writeb(port->x_char, port->membase + MCFUART_UTB); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { + if (xmit->head == xmit->tail) + break; + writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + } +} + +/****************************************************************************/ + +static irqreturn_t mcf_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int isr; + irqreturn_t ret = IRQ_NONE; + + isr = readb(port->membase + MCFUART_UISR) & pp->imr; + + spin_lock(&port->lock); + if (isr & MCFUART_UIR_RXREADY) { + mcf_rx_chars(pp); + ret = IRQ_HANDLED; + } + if (isr & MCFUART_UIR_TXREADY) { + mcf_tx_chars(pp); + ret = IRQ_HANDLED; + } + spin_unlock(&port->lock); + + return ret; +} + +/****************************************************************************/ + +static void mcf_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; + + /* Clear mask, so no surprise interrupts. */ + writeb(0, port->membase + MCFUART_UIMR); + + if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port)) + printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " + "interrupt vector=%d\n", port->line, port->irq); +} + +/****************************************************************************/ + +static const char *mcf_type(struct uart_port *port) +{ + return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; +} + +/****************************************************************************/ + +static int mcf_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +/****************************************************************************/ + +static void mcf_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +/****************************************************************************/ + +static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) + return -EINVAL; + return 0; +} + +/****************************************************************************/ + +/* + * Define the basic serial functions we support. + */ +static const struct uart_ops mcf_uart_ops = { + .tx_empty = mcf_tx_empty, + .get_mctrl = mcf_get_mctrl, + .set_mctrl = mcf_set_mctrl, + .start_tx = mcf_start_tx, + .stop_tx = mcf_stop_tx, + .stop_rx = mcf_stop_rx, + .enable_ms = mcf_enable_ms, + .break_ctl = mcf_break_ctl, + .startup = mcf_startup, + .shutdown = mcf_shutdown, + .set_termios = mcf_set_termios, + .type = mcf_type, + .request_port = mcf_request_port, + .release_port = mcf_release_port, + .config_port = mcf_config_port, + .verify_port = mcf_verify_port, +}; + +static struct mcf_uart mcf_ports[4]; + +#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) + +/****************************************************************************/ +#if defined(CONFIG_SERIAL_MCF_CONSOLE) +/****************************************************************************/ + +int __init early_mcf_setup(struct mcf_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) port->mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->flags = ASYNC_BOOT_AUTOCONF; + port->ops = &mcf_uart_ops; + } + + return 0; +} + +/****************************************************************************/ + +static void mcf_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(mcf_ports + co->index)->port; + int i; + + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } + writeb(c, port->membase + MCFUART_UTB); + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } +} + +/****************************************************************************/ + +static void mcf_console_write(struct console *co, const char *s, unsigned int count) +{ + for (; (count); count--, s++) { + mcf_console_putc(co, *s); + if (*s == '\n') + mcf_console_putc(co, '\r'); + } +} + +/****************************************************************************/ + +static int __init mcf_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_MCF_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) + co->index = 0; + port = &mcf_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/****************************************************************************/ + +static struct uart_driver mcf_driver; + +static struct console mcf_console = { + .name = "ttyS", + .write = mcf_console_write, + .device = uart_console_device, + .setup = mcf_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mcf_driver, +}; + +static int __init mcf_console_init(void) +{ + register_console(&mcf_console); + return 0; +} + +console_initcall(mcf_console_init); + +#define MCF_CONSOLE &mcf_console + +/****************************************************************************/ +#else +/****************************************************************************/ + +#define MCF_CONSOLE NULL + +/****************************************************************************/ +#endif /* CONFIG_MCF_CONSOLE */ +/****************************************************************************/ + +/* + * Define the mcf UART driver structure. + */ +static struct uart_driver mcf_driver = { + .owner = THIS_MODULE, + .driver_name = "mcf", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MCF_MAXPORTS, + .cons = MCF_CONSOLE, +}; + +/****************************************************************************/ + +static int __devinit mcf_probe(struct platform_device *pdev) +{ + struct mcf_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) platp[i].mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->ops = &mcf_uart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static int __devexit mcf_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; (i < MCF_MAXPORTS); i++) { + port = &mcf_ports[i].port; + if (port) + uart_remove_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static struct platform_driver mcf_platform_driver = { + .probe = mcf_probe, + .remove = __devexit_p(mcf_remove), + .driver = { + .name = "mcfuart", + .owner = THIS_MODULE, + }, +}; + +/****************************************************************************/ + +static int __init mcf_init(void) +{ + int rc; + + printk("ColdFire internal UART serial driver\n"); + + rc = uart_register_driver(&mcf_driver); + if (rc) + return rc; + rc = platform_driver_register(&mcf_platform_driver); + if (rc) + return rc; + return 0; +} + +/****************************************************************************/ + +static void __exit mcf_exit(void) +{ + platform_driver_unregister(&mcf_platform_driver); + uart_unregister_driver(&mcf_driver); +} + +/****************************************************************************/ + +module_init(mcf_init); +module_exit(mcf_exit); + +MODULE_AUTHOR("Greg Ungerer "); +MODULE_DESCRIPTION("Freescale ColdFire UART driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mcfuart"); + +/****************************************************************************/ diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c new file mode 100644 index 0000000..d40010a --- /dev/null +++ b/drivers/tty/serial/mfd.c @@ -0,0 +1,1513 @@ +/* + * mfd.c: driver for High Speed UART device of Intel Medfield platform + * + * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +/* Notes: + * 1. DMA channel allocation: 0/1 channel are assigned to port 0, + * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans + * are used for RX, odd chans for TX + * + * 2. In A0 stepping, UART will not support TX half empty flag + * + * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * asserted, only when the HW is reset the DDCD and DDSR will + * be triggered + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MFD_HSU_A0_STEPPING 1 + +#define HSU_DMA_BUF_SIZE 2048 + +#define chan_readl(chan, offset) readl(chan->reg + offset) +#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) + +#define mfd_readl(obj, offset) readl(obj->reg + offset) +#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) + +#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) + +struct hsu_dma_buffer { + u8 *buf; + dma_addr_t dma_addr; + u32 dma_size; + u32 ofs; +}; + +struct hsu_dma_chan { + u32 id; + enum dma_data_direction dirt; + struct uart_hsu_port *uport; + void __iomem *reg; + struct timer_list rx_timer; /* only needed by RX channel */ +}; + +struct uart_hsu_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + char name[12]; + int index; + struct device *dev; + + struct hsu_dma_chan *txc; + struct hsu_dma_chan *rxc; + struct hsu_dma_buffer txbuf; + struct hsu_dma_buffer rxbuf; + int use_dma; /* flag for DMA/PIO */ + int running; + int dma_tx_on; +}; + +/* Top level data structure of HSU */ +struct hsu_port { + void __iomem *reg; + unsigned long paddr; + unsigned long iolen; + u32 irq; + + struct uart_hsu_port port[3]; + struct hsu_dma_chan chans[10]; + + struct dentry *debugfs; +}; + +static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) +{ + unsigned int val; + + if (offset > UART_MSR) { + offset <<= 2; + val = readl(up->port.membase + offset); + } else + val = (unsigned int)readb(up->port.membase + offset); + + return val; +} + +static inline void serial_out(struct uart_hsu_port *up, int offset, int value) +{ + if (offset > UART_MSR) { + offset <<= 2; + writel(value, up->port.membase + offset); + } else { + unsigned char val = value & 0xff; + writeb(val, up->port.membase + offset); + } +} + +#ifdef CONFIG_DEBUG_FS + +#define HSU_REGS_BUFSIZE 1024 + +static int hsu_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct uart_hsu_port *up = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU port[%d] regs:\n", up->index); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); + + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static ssize_t dma_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct hsu_dma_chan *chan = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU DMA channel [%d] regs:\n", chan->id); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); + + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = port_show_regs, + .llseek = default_llseek, +}; + +static const struct file_operations dma_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = dma_show_regs, + .llseek = default_llseek, +}; + +static int hsu_debugfs_init(struct hsu_port *hsu) +{ + int i; + char name[32]; + + hsu->debugfs = debugfs_create_dir("hsu", NULL); + if (!hsu->debugfs) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + snprintf(name, sizeof(name), "port_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); + } + + for (i = 0; i < 6; i++) { + snprintf(name, sizeof(name), "dma_chan_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); + } + + return 0; +} + +static void hsu_debugfs_remove(struct hsu_port *hsu) +{ + if (hsu->debugfs) + debugfs_remove_recursive(hsu->debugfs); +} + +#else +static inline int hsu_debugfs_init(struct hsu_port *hsu) +{ + return 0; +} + +static inline void hsu_debugfs_remove(struct hsu_port *hsu) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void serial_hsu_enable_ms(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +void hsu_dma_tx(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + struct hsu_dma_buffer *dbuf = &up->txbuf; + int count; + + /* test_and_set_bit may be better, but anyway it's in lock protected mode */ + if (up->dma_tx_on) + return; + + /* Update the circ buf info */ + xmit->tail += dbuf->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + up->port.icount.tx += dbuf->ofs; + dbuf->ofs = 0; + + /* Disable the channel */ + chan_writel(up->txc, HSU_CH_CR, 0x0); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { + dma_sync_single_for_device(up->port.dev, + dbuf->dma_addr, + dbuf->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + dbuf->ofs = count; + + /* Reprogram the channel */ + chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); + chan_writel(up->txc, HSU_CH_D0TSR, count); + + /* Reenable the channel */ + chan_writel(up->txc, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24)); + up->dma_tx_on = 1; + chan_writel(up->txc, HSU_CH_CR, 0x1); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +/* The buffer is already cache coherent */ +void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) +{ + dbuf->ofs = 0; + + chan_writel(rxc, HSU_CH_BSR, 32); + chan_writel(rxc, HSU_CH_MOTSR, 4); + + chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + chan_writel(rxc, HSU_CH_CR, 0x3); + + mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); +} + +/* Protected by spin_lock_irqsave(port->lock) */ +static void serial_hsu_start_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + if (up->use_dma) { + hsu_dma_tx(up); + } else if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_hsu_stop_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *txc = up->txc; + + if (up->use_dma) + chan_writel(txc, HSU_CH_CR, 0x0); + else if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* This is always called in spinlock protected mode, so + * modify timeout timer is safe here */ +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +{ + struct hsu_dma_buffer *dbuf = &up->rxbuf; + struct hsu_dma_chan *chan = up->rxc; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; + int count; + + if (!tty) + return; + + /* + * First need to know how many is already transferred, + * then check if its a timeout DMA irq, and return + * the trail bytes out, push them up and reenable the + * channel + */ + + /* Timeout IRQ, need wait some time, see Errata 2 */ + if (int_sts & 0xf00) + udelay(2); + + /* Stop the channel */ + chan_writel(chan, HSU_CH_CR, 0x0); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + if (!count) { + /* Restart the channel before we leave */ + chan_writel(chan, HSU_CH_CR, 0x3); + return; + } + del_timer(&chan->rx_timer); + + dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* + * Head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + tty_insert_flip_string(tty, dbuf->buf, count); + port->icount.rx += count; + + dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* Reprogram the channel */ + chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(chan, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + tty_flip_buffer_push(tty); + + chan_writel(chan, HSU_CH_CR, 0x3); + chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; + add_timer(&chan->rx_timer); + +} + +static void serial_hsu_stop_rx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *chan = up->rxc; + + if (up->use_dma) + chan_writel(chan, HSU_CH_CR, 0x2); + else { + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void receive_chars(struct uart_hsu_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + unsigned int max_count = 256; + + if (!tty) + return; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + + dev_warn(up->dev, "We really rush into ERR/BI case" + "status = 0x%02x", *status); + /* For statistics only */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* Mask off conditions which should be ignored. */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (up->port.cons && + up->port.cons->index == up->port.line) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && max_count--); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_hsu_stop_tx(&up->port); + return; + } + +#ifndef MFD_HSU_A0_STEPPING + count = up->port.fifosize / 2; +#else + /* + * A0 only supports fully empty IRQ, and the first char written + * into it won't clear the EMPT bit, so we may need be cautious + * by useing a shorter buffer + */ + count = up->port.fifosize - 4; +#endif + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_hsu_stop_tx(&up->port); +} + +static inline void check_modem_status(struct uart_hsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + /* We may only get DDCD when HW init and reset */ + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + /* Will start/stop_tx accordingly */ + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static irqreturn_t port_irq(int irq, void *dev_id) +{ + struct uart_hsu_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + if (unlikely(!up->running)) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + if (up->use_dma) { + lsr = serial_in(up, UART_LSR); + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) + dev_warn(up->dev, + "Got lsr irq while using DMA, lsr = 0x%2x\n", + lsr); + check_modem_status(up); + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; + } + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_NONE; + } + + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + + /* lsr will be renewed during the receive_chars */ + if (lsr & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; +} + +static inline void dma_chan_irq(struct hsu_dma_chan *chan) +{ + struct uart_hsu_port *up = chan->uport; + unsigned long flags; + u32 int_sts; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!up->use_dma || !up->running) + goto exit; + + /* + * No matter what situation, need read clear the IRQ status + * There is a bug, see Errata 5, HSD 2900918 + */ + int_sts = chan_readl(chan, HSU_CH_SR); + + /* Rx channel */ + if (chan->dirt == DMA_FROM_DEVICE) + hsu_dma_rx(up, int_sts); + + /* Tx channel */ + if (chan->dirt == DMA_TO_DEVICE) { + chan_writel(chan, HSU_CH_CR, 0x0); + up->dma_tx_on = 0; + hsu_dma_tx(up); + } + +exit: + spin_unlock_irqrestore(&up->port.lock, flags); + return; +} + +static irqreturn_t dma_irq(int irq, void *dev_id) +{ + struct hsu_port *hsu = dev_id; + u32 int_sts, i; + + int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); + + /* Currently we only have 6 channels may be used */ + for (i = 0; i < 6; i++) { + if (int_sts & 0x1) + dma_chan_irq(&hsu->chans[i]); + int_sts >>= 1; + } + + return IRQ_HANDLED; +} + +static unsigned int serial_hsu_tx_empty(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_hsu_get_mctrl(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_hsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * What special to do: + * 1. chose the 64B fifo mode + * 2. make sure not to select half empty mode for A0 stepping + * 3. start dma or pio depends on configuration + * 4. we only allocate dma memory when needed + */ +static int serial_hsu_startup(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* Clear the interrupt registers. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* Now, initialize the UART, default is 8n1 */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + if (!up->use_dma) + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; + else + up->ier = 0; + serial_out(up, UART_IER, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* DMA init */ + if (up->use_dma) { + struct hsu_dma_buffer *dbuf; + struct circ_buf *xmit = &port->state->xmit; + + up->dma_tx_on = 0; + + /* First allocate the RX buffer */ + dbuf = &up->rxbuf; + dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); + if (!dbuf->buf) { + up->use_dma = 0; + goto exit; + } + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + HSU_DMA_BUF_SIZE, + DMA_FROM_DEVICE); + dbuf->dma_size = HSU_DMA_BUF_SIZE; + + /* Start the RX channel right now */ + hsu_dma_start_rx_chan(up->rxc, dbuf); + + /* Next init the TX DMA */ + dbuf = &up->txbuf; + dbuf->buf = xmit->buf; + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + dbuf->dma_size = UART_XMIT_SIZE; + + /* This should not be changed all around */ + chan_writel(up->txc, HSU_CH_BSR, 32); + chan_writel(up->txc, HSU_CH_MOTSR, 4); + dbuf->ofs = 0; + } + +exit: + /* And clear the interrupt registers again for luck. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + up->running = 1; + return 0; +} + +static void serial_hsu_shutdown(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + del_timer_sync(&up->rxc->rx_timer); + + /* Disable interrupts from this port */ + up->ier = 0; + serial_out(up, UART_IER, 0); + up->running = 0; + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Disable break condition and FIFOs */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct tty_struct *tty = port->state->port.tty; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + u32 ps, mul; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + /* CMSPAR isn't supported by this driver */ + if (tty) + tty->termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * The base clk is 50Mhz, and the baud rate come from: + * baud = 50M * MUL / (DIV * PS * DLAB) + * + * For those basic low baud rate we can get the direct + * scalar from 2746800, like 115200 = 2746800/24. For those + * higher baud rate, we handle them case by case, mainly by + * adjusting the MUL/PS registers, and DIV register is kept + * as default value 0x3d09 to make things simple + */ + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + + quot = 1; + ps = 0x10; + mul = 0x3600; + switch (baud) { + case 3500000: + mul = 0x3345; + ps = 0xC; + break; + case 1843200: + mul = 0x2400; + break; + case 3000000: + case 2500000: + case 2000000: + case 1500000: + case 1000000: + case 500000: + /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ + mul = baud / 500000 * 0x9C4; + break; + default: + /* Use uart_get_divisor to get quot for other baud rates */ + quot = 0; + } + + if (!quot) + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; + + fcr |= UART_FCR_HSU_64B_FIFO; +#ifdef MFD_HSU_A0_STEPPING + /* A0 doesn't support half empty IRQ */ + fcr |= UART_FCR_FULL_EMPT_TXI; +#endif + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* Characters to ignore */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts, disable + * MSI by default + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE | UART_MCR_RTS; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_MUL, mul); /* set MUL */ + serial_out(up, UART_PS, ps); /* set PS */ + up->lcr = cval; /* Save LCR */ + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_hsu_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_hsu_release_port(struct uart_port *port) +{ +} + +static int serial_hsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_hsu_config_port(struct uart_port *port, int flags) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + up->port.type = PORT_MFD; +} + +static int +serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* We don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_hsu_type(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + return up->name; +} + +/* Mainly for uart console use */ +static struct uart_hsu_port *serial_hsu_ports[3]; +static struct uart_driver serial_hsu_reg; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* Wait for transmitter & holding register to empty */ +static inline void wait_for_xmitr(struct uart_hsu_port *up) +{ + unsigned int status, tmout = 1000; + + /* Wait up to 1ms for the character to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while (!(status & BOTH_EMPTY)); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_hsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_hsu_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_hsu_port *up = serial_hsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* First save the IER then disable the interrupts */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_hsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static struct console serial_hsu_console; + +static int __init +serial_hsu_console_setup(struct console *co, char *options) +{ + struct uart_hsu_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index == -1 || co->index >= serial_hsu_reg.nr) + co->index = 0; + up = serial_hsu_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(&up->port, co, baud, parity, bits, flow); + + return ret; +} + +static struct console serial_hsu_console = { + .name = "ttyMFD", + .write = serial_hsu_console_write, + .device = uart_console_device, + .setup = serial_hsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = 2, + .data = &serial_hsu_reg, +}; +#endif + +struct uart_ops serial_hsu_pops = { + .tx_empty = serial_hsu_tx_empty, + .set_mctrl = serial_hsu_set_mctrl, + .get_mctrl = serial_hsu_get_mctrl, + .stop_tx = serial_hsu_stop_tx, + .start_tx = serial_hsu_start_tx, + .stop_rx = serial_hsu_stop_rx, + .enable_ms = serial_hsu_enable_ms, + .break_ctl = serial_hsu_break_ctl, + .startup = serial_hsu_startup, + .shutdown = serial_hsu_shutdown, + .set_termios = serial_hsu_set_termios, + .pm = serial_hsu_pm, + .type = serial_hsu_type, + .release_port = serial_hsu_release_port, + .request_port = serial_hsu_request_port, + .config_port = serial_hsu_config_port, + .verify_port = serial_hsu_verify_port, +}; + +static struct uart_driver serial_hsu_reg = { + .owner = THIS_MODULE, + .driver_name = "MFD serial", + .dev_name = "ttyMFD", + .major = TTY_MAJOR, + .minor = 128, + .nr = 3, +}; + +#ifdef CONFIG_PM +static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + + /* Make sure this is not the internal dma controller */ + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_suspend_port(&serial_hsu_reg, &up->port); + } + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int serial_hsu_resume(struct pci_dev *pdev) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) + dev_warn(&pdev->dev, + "HSU: can't re-enable device, try to continue\n"); + + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_resume_port(&serial_hsu_reg, &up->port); + } + return 0; +} +#else +#define serial_hsu_suspend NULL +#define serial_hsu_resume NULL +#endif + +/* temp global pointer before we settle down on using one or four PCI dev */ +static struct hsu_port *phsu; + +static int serial_hsu_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uart_hsu_port *uport; + int index, ret; + + printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + switch (pdev->device) { + case 0x081B: + index = 0; + break; + case 0x081C: + index = 1; + break; + case 0x081D: + index = 2; + break; + case 0x081E: + /* internal DMA controller */ + index = 3; + break; + default: + dev_err(&pdev->dev, "HSU: out of index!"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (index == 3) { + /* DMA controller */ + ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + pci_set_drvdata(pdev, phsu); + } else { + /* UART port 0~2 */ + uport = &phsu->port[index]; + uport->port.irq = pdev->irq; + uport->port.dev = &pdev->dev; + uport->dev = &pdev->dev; + + ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + uart_add_one_port(&serial_hsu_reg, &uport->port); + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (index == 2) { + register_console(&serial_hsu_console); + uport->port.cons = &serial_hsu_console; + } +#endif + pci_set_drvdata(pdev, uport); + } + + return 0; + +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void hsu_dma_rx_timeout(unsigned long data) +{ + struct hsu_dma_chan *chan = (void *)data; + struct uart_hsu_port *up = chan->uport; + struct hsu_dma_buffer *dbuf = &up->rxbuf; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + + if (!count) { + mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); + goto exit; + } + + hsu_dma_rx(up, 0); +exit: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void hsu_global_init(void) +{ + struct hsu_port *hsu; + struct uart_hsu_port *uport; + struct hsu_dma_chan *dchan; + int i, ret; + + hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); + if (!hsu) + return; + + /* Get basic io resource and map it */ + hsu->paddr = 0xffa28000; + hsu->iolen = 0x1000; + + if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) + pr_warning("HSU: error in request mem region\n"); + + hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); + if (!hsu->reg) { + pr_err("HSU: error in ioremap\n"); + ret = -ENOMEM; + goto err_free_region; + } + + /* Initialise the 3 UART ports */ + uport = hsu->port; + for (i = 0; i < 3; i++) { + uport->port.type = PORT_MFD; + uport->port.iotype = UPIO_MEM; + uport->port.mapbase = (resource_size_t)hsu->paddr + + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + + sprintf(uport->name, "hsu_port%d", i); + uport->port.fifosize = 64; + uport->port.ops = &serial_hsu_pops; + uport->port.line = i; + uport->port.flags = UPF_IOREMAP; + /* set the scalable maxim support rate to 2746800 bps */ + uport->port.uartclk = 115200 * 24 * 16; + + uport->running = 0; + uport->txc = &hsu->chans[i * 2]; + uport->rxc = &hsu->chans[i * 2 + 1]; + + serial_hsu_ports[i] = uport; + uport->index = i; + uport++; + } + + /* Initialise 6 dma channels */ + dchan = hsu->chans; + for (i = 0; i < 6; i++) { + dchan->id = i; + dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + dchan->uport = &hsu->port[i/2]; + dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + + i * HSU_DMA_CHANS_REG_LENGTH; + + /* Work around for RX */ + if (dchan->dirt == DMA_FROM_DEVICE) { + init_timer(&dchan->rx_timer); + dchan->rx_timer.function = hsu_dma_rx_timeout; + dchan->rx_timer.data = (unsigned long)dchan; + } + dchan++; + } + + phsu = hsu; + hsu_debugfs_init(hsu); + return; + +err_free_region: + release_mem_region(hsu->paddr, hsu->iolen); + kfree(hsu); + return; +} + +static void serial_hsu_remove(struct pci_dev *pdev) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + + if (!priv) + return; + + /* For port 0/1/2, priv is the address of uart_hsu_port */ + if (pdev->device != 0x081E) { + up = priv; + uart_remove_one_port(&serial_hsu_reg, &up->port); + } + + pci_set_drvdata(pdev, NULL); + free_irq(pdev->irq, priv); + pci_disable_device(pdev); +} + +/* First 3 are UART ports, and the 4th is the DMA */ +static const struct pci_device_id pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, + {}, +}; + +static struct pci_driver hsu_pci_driver = { + .name = "HSU serial", + .id_table = pci_ids, + .probe = serial_hsu_probe, + .remove = __devexit_p(serial_hsu_remove), + .suspend = serial_hsu_suspend, + .resume = serial_hsu_resume, +}; + +static int __init hsu_pci_init(void) +{ + int ret; + + hsu_global_init(); + + ret = uart_register_driver(&serial_hsu_reg); + if (ret) + return ret; + + return pci_register_driver(&hsu_pci_driver); +} + +static void __exit hsu_pci_exit(void) +{ + pci_unregister_driver(&hsu_pci_driver); + uart_unregister_driver(&serial_hsu_reg); + + hsu_debugfs_remove(phsu); + + kfree(phsu); +} + +module_init(hsu_pci_init); +module_exit(hsu_pci_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:medfield-hsu"); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c new file mode 100644 index 0000000..126ec7f --- /dev/null +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -0,0 +1,1527 @@ +/* + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth . + * + * Copyright (C) 2008 Freescale Semiconductor Inc. + * John Rigby + * Added support for MPC5121 + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely + * Copyright (C) 2004-2006 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_PSC_MAJOR 204 +#define SERIAL_PSC_MINOR 148 + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +/* lookup table for matching device nodes to index numbers */ +static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; + +static void mpc52xx_uart_of_enumerate(void); + + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); + + +/* Simple macro to test if a port is console or not. This one is taken + * for serial_core.c and maybe should be moved to serial_core.h ? */ +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) \ + ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + +/* ======================================================================== */ +/* PSC fifo operations for isolating differences between 52xx and 512x */ +/* ======================================================================== */ + +struct psc_ops { + void (*fifo_init)(struct uart_port *port); + int (*raw_rx_rdy)(struct uart_port *port); + int (*raw_tx_rdy)(struct uart_port *port); + int (*rx_rdy)(struct uart_port *port); + int (*tx_rdy)(struct uart_port *port); + int (*tx_empty)(struct uart_port *port); + void (*stop_rx)(struct uart_port *port); + void (*start_tx)(struct uart_port *port); + void (*stop_tx)(struct uart_port *port); + void (*rx_clr_irq)(struct uart_port *port); + void (*tx_clr_irq)(struct uart_port *port); + void (*write_char)(struct uart_port *port, unsigned char c); + unsigned char (*read_char)(struct uart_port *port); + void (*cw_disable_ints)(struct uart_port *port); + void (*cw_restore_ints)(struct uart_port *port); + unsigned int (*set_baudrate)(struct uart_port *port, + struct ktermios *new, + struct ktermios *old); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); +}; + +/* setting the prescaler and divisor reg is common for all chips */ +static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, + u16 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_be16(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +#ifdef CONFIG_PPC_MPC52xx +#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) +static void mpc52xx_psc_fifo_init(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); + + out_8(&fifo->rfcntl, 0x00); + out_be16(&fifo->rfalarm, 0x1ff); + out_8(&fifo->tfcntl, 0x07); + out_be16(&fifo->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_RXRDY; +} + +static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXRDY; +} + + +static int mpc52xx_psc_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_RXRDY; +} + +static int mpc52xx_psc_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_TXRDY; +} + +static int mpc52xx_psc_tx_empty(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXEMP; +} + +static void mpc52xx_psc_start_tx(struct uart_port *port) +{ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_tx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_rx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); +} + +static unsigned char mpc52xx_psc_read_char(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_buffer_8); +} + +static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, 0); +} + +static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 32); + divisor = (port->uartclk + 16 * baud) / (32 * baud); + + /* enable the /32 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + u16 prescaler; + + /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the + * ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 4); + divisor = (port->uartclk + 2 * baud) / (4 * baud); + + /* select the proper prescaler and set the divisor */ + if (divisor > 0xffff) { + divisor = (divisor + 4) / 8; + prescaler = 0xdd00; /* /32 */ + } else + prescaler = 0xff00; /* /4 */ + mpc52xx_set_divisor(PSC(port), prescaler, divisor); + return baud; +} + +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_DISABLED; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + +static struct psc_ops mpc52xx_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, +}; + +static struct psc_ops mpc5200b_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200b_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, +}; + +#endif /* CONFIG_MPC52xx */ + +#ifdef CONFIG_PPC_MPC512x +#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; + +static void mpc512x_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->txalarm, 1); + out_be32(&FIFO_512x(port)->tximr, 0); + + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->rxalarm, 1); + out_be32(&FIFO_512x(port)->rximr, 0); + + out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc512x_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->rxsr) + & in_be32(&FIFO_512x(port)->rximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & in_be32(&FIFO_512x(port)->tximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc512x_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); +} + +static void mpc512x_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); +} + +static void mpc512x_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); +} + +static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_512x(port)->txdata_8, c); +} + +static unsigned char mpc512x_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_512x(port)->rxdata_8); +} + +static void mpc512x_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_512x(port)->tximr) << 16 | + in_be32(&FIFO_512x(port)->rximr); + out_be32(&FIFO_512x(port)->tximr, 0); + out_be32(&FIFO_512x(port)->rximr, 0); +} + +static void mpc512x_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); +} + +static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on + * pg. 30-10 that the chip supports a /32 and a /10 prescaler. + * Furthermore, it states that "After reset, the prescaler by 10 + * for the UART mode is selected", but the reset register value is + * 0x0000 which means a /32 prescaler. This is wrong. + * + * In reality using /32 prescaler doesn't work, as it is not supported! + * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", + * Chapter 4.1 PSC in UART Mode. + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + return -ENODEV; + } + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + of_node_put(np); + return -ENODEV; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if (psc_fifoc_irq == NO_IRQ) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + iounmap(psc_fifoc); + return -ENODEV; + } + + return 0; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static int mpc512x_psc_clock(struct uart_port *port, int enable) +{ + struct clk *psc_clk; + int psc_num; + char clk_name[10]; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); + psc_clk = clk_get(port->dev, clk_name); + if (IS_ERR(psc_clk)) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); + + if (enable) + clk_enable(psc_clk); + else + clk_disable(psc_clk); + + return 0; +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} + +static struct psc_ops mpc512x_psc_ops = { + .fifo_init = mpc512x_psc_fifo_init, + .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, + .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, + .rx_rdy = mpc512x_psc_rx_rdy, + .tx_rdy = mpc512x_psc_tx_rdy, + .tx_empty = mpc512x_psc_tx_empty, + .stop_rx = mpc512x_psc_stop_rx, + .start_tx = mpc512x_psc_start_tx, + .stop_tx = mpc512x_psc_stop_tx, + .rx_clr_irq = mpc512x_psc_rx_clr_irq, + .tx_clr_irq = mpc512x_psc_tx_clr_irq, + .write_char = mpc512x_psc_write_char, + .read_char = mpc512x_psc_read_char, + .cw_disable_ints = mpc512x_psc_cw_disable_ints, + .cw_restore_ints = mpc512x_psc_cw_restore_ints, + .set_baudrate = mpc512x_psc_set_baudrate, + .clock = mpc512x_psc_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, +}; +#endif + +static struct psc_ops *psc_ops; + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (mctrl & TIOCM_RTS) + out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR; + u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + + if (!(status & MPC52xx_PSC_CTS)) + ret |= TIOCM_CTS; + if (!(status & MPC52xx_PSC_DCD)) + ret |= TIOCM_CAR; + + return ret; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_tx(port); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->start_tx(port); +} + +static void +mpc52xx_uart_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + port->x_char = ch; + if (ch) { + /* Make sure tx interrupts are on */ + /* Truly necessary ??? They should be anyway */ + psc_ops->start_tx(port); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_rx(port); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if (ctl == -1) + out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK); + else + out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + int ret; + + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + port->irqflags, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + out_be32(&psc->sicr, 0); /* UART mode DCD ignored */ + + psc_ops->fifo_init(port); + + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* Shut down the port. Leave TX active if on a console port */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + if (!uart_console(port)) + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); + + if (psc_ops->clock) + psc_ops->clock(port, 0); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned long flags; + unsigned char mr1, mr2; + unsigned int j; + unsigned int baud; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else + mr1 |= MPC52xx_PSC_MODE_PARNONE; + + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + if (new->c_cflag & CRTSCTS) { + mr1 |= MPC52xx_PSC_MODE_RXRTS; + mr2 |= MPC52xx_PSC_MODE_TXCTS; + } + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + if (!j) + printk(KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n"); + + /* Reset the TX & RX */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->mode, mr1); + out_8(&psc->mode, mr2); + baud = psc_ops->set_baudrate(port, new, old); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + if (UART_ENABLE_MS(port, new->c_cflag)) + mpc52xx_uart_enable_ms(port); + + /* Reenable TX & RX */ + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + /* + * We keep using PORT_MPC52xx for historic reasons although it applies + * for MPC512x, too, but print "MPC5xxx" to not irritate users + */ + return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + /* remapped by us ? */ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + int err; + + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, + sizeof(struct mpc52xx_psc)); + + if (!port->membase) + return -EINVAL; + + err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; + + if (err && (port->flags & UPF_IOREMAP)) { + iounmap(port->membase); + port->membase = NULL; + } + + return err; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE) + && (mpc52xx_uart_request_port(port) == 0)) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) + return -EINVAL; + + if ((ser->irq != port->irq) || + (ser->io_type != UPIO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void *)port->mapbase) || + (ser->hub6 != 0)) + return -EINVAL; + + return 0; +} + + +static struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .send_xchar = mpc52xx_uart_send_xchar, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ +/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned char ch, flag; + unsigned short status; + + /* While we can read, do so ! */ + while (psc_ops->raw_rx_rdy(port)) { + /* Get the char */ + ch = psc_ops->read_char(port); + + /* Handle sysreq char */ +#ifdef SUPPORT_SYSRQ + if (uart_handle_sysrq_char(port, ch)) { + port->sysrq = 0; + continue; + } +#endif + + /* Store it */ + + flag = TTY_NORMAL; + port->icount.rx++; + + status = in_be16(&PSC(port)->mpc52xx_psc_status); + + if (status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB)) { + + if (status & MPC52xx_PSC_SR_RB) { + flag = TTY_BREAK; + uart_handle_break(port); + port->icount.brk++; + } else if (status & MPC52xx_PSC_SR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } + else if (status & MPC52xx_PSC_SR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } + + /* Clear error condition */ + out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); + + } + tty_insert_flip_char(tty, ch, flag); + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + port->icount.overrun++; + } + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tty); + spin_lock(&port->lock); + + return psc_ops->raw_rx_rdy(port); +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + /* Process out of band chars */ + if (port->x_char) { + psc_ops->write_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + /* Send chars */ + while (psc_ops->raw_tx_rdy(port)) { + psc_ops->write_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc5xxx_uart_process_int(struct uart_port *port) +{ + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + u8 status; + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + psc_ops->rx_clr_irq(port); + if (psc_ops->rx_rdy(port)) + keepgoing |= mpc52xx_uart_int_rx_chars(port); + + psc_ops->tx_clr_irq(port); + if (psc_ops->tx_rdy(port)) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + if (status & MPC52xx_PSC_D_DCD) + uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); + + if (status & MPC52xx_PSC_D_CTS) + uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); + + /* Limit number of iteration */ + if (!(--pass)) + keepgoing = 0; + + } while (keepgoing); + + return IRQ_HANDLED; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned char mr1; + + pr_debug("mpc52xx_console_get_options(port=%p)\n", port); + + /* Read the mode registers */ + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + mr1 = in_8(&psc->mode); + + /* CT{U,L}R are write-only ! */ + *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: + *bits = 5; + break; + case MPC52xx_PSC_MODE_6_BITS: + *bits = 6; + break; + case MPC52xx_PSC_MODE_7_BITS: + *bits = 7; + break; + case MPC52xx_PSC_MODE_8_BITS: + default: + *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + unsigned int i, j; + + /* Disable interrupts */ + psc_ops->cw_disable_ints(port); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + /* Write all the chars */ + for (i = 0; i < count; i++, s++) { + /* Line return handling */ + if (*s == '\n') + psc_ops->write_char(port, '\r'); + + /* Send the char */ + psc_ops->write_char(port, *s); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + } + + /* Restore interrupt state */ + psc_ops->cw_restore_ints(port); +} + + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct device_node *np = mpc52xx_uart_nodes[co->index]; + unsigned int uartclk; + struct resource res; + int ret; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { + pr_debug("PSC%x out of range\n", co->index); + return -EINVAL; + } + + if (!np) { + pr_debug("PSC%x not found in device tree\n", co->index); + return -EINVAL; + } + + pr_debug("Console on ttyPSC%x is %s\n", + co->index, mpc52xx_uart_nodes[co->index]->full_name); + + /* Fetch register locations */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_debug("Could not get resources for PSC%x\n", co->index); + return ret; + } + + uartclk = mpc5xxx_get_bus_frequency(np); + if (uartclk == 0) { + pr_debug("Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->ops = &mpc52xx_uart_ops; + port->mapbase = res.start; + port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); + port->irq = irq_of_parse_and_map(np, 0); + + if (port->membase == NULL) + return -EINVAL; + + pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->membase, + port->irq, port->uartclk); + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", + baud, bits, parity, flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyPSC", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + mpc52xx_uart_of_enumerate(); + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyPSC", + .major = SERIAL_PSC_MAJOR, + .minor = SERIAL_PSC_MINOR, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static struct of_device_id mpc52xx_uart_of_match[] = { +#ifdef CONFIG_PPC_MPC52xx + { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, + { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by old lite5200 device trees: */ + { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by efika: */ + { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, +#endif +#ifdef CONFIG_PPC_MPC512x + { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, +#endif + {}, +}; + +static int __devinit +mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match) +{ + int idx = -1; + unsigned int uartclk; + struct uart_port *port = NULL; + struct resource res; + int ret; + + dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); + + /* Check validity & presence */ + for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) + if (mpc52xx_uart_nodes[idx] == op->dev.of_node) + break; + if (idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + pr_debug("Found %s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx]->full_name, idx); + + /* set the uart clock to the input clock of the psc, the different + * prescalers are taken into account in the set_baudrate() methods + * of the respective chip */ + uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); + if (uartclk == 0) { + dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->fifosize = 512; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + (uart_console(port) ? 0 : UPF_IOREMAP); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + port->dev = &op->dev; + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(op->dev.of_node, 0, &res); + if (ret) + return ret; + + port->mapbase = res.start; + if (!port->mapbase) { + dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); + return -EINVAL; + } + + psc_ops->get_irq(port, op->dev.of_node); + if (port->irq == NO_IRQ) { + dev_dbg(&op->dev, "Could not get irq\n"); + return -EINVAL; + } + + dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->irq, port->uartclk); + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (ret) + return ret; + + dev_set_drvdata(&op->dev, (void *)port); + return 0; +} + +static int +mpc52xx_uart_of_remove(struct platform_device *op) +{ + struct uart_port *port = dev_get_drvdata(&op->dev); + dev_set_drvdata(&op->dev, NULL); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_of_resume(struct platform_device *op) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static void +mpc52xx_uart_of_assign(struct device_node *np) +{ + int i; + + /* Find the first free PSC number */ + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i] == NULL) { + of_node_get(np); + mpc52xx_uart_nodes[i] = np; + return; + } + } +} + +static void +mpc52xx_uart_of_enumerate(void) +{ + static int enum_done; + struct device_node *np; + const struct of_device_id *match; + int i; + + if (enum_done) + return; + + /* Assign index to each PSC in device tree */ + for_each_matching_node(np, mpc52xx_uart_of_match) { + match = of_match_node(mpc52xx_uart_of_match, np); + psc_ops = match->data; + mpc52xx_uart_of_assign(np); + } + + enum_done = 1; + + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i]) + pr_debug("%s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i]->full_name, i); + } +} + +MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); + +static struct of_platform_driver mpc52xx_uart_of_driver = { + .probe = mpc52xx_uart_of_probe, + .remove = mpc52xx_uart_of_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_of_suspend, + .resume = mpc52xx_uart_of_resume, +#endif + .driver = { + .name = "mpc52xx-psc-uart", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_uart_of_match, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + mpc52xx_uart_of_enumerate(); + + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops && psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + return ret; + } + + ret = of_register_platform_driver(&mpc52xx_uart_of_driver); + if (ret) { + printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; + } + + return 0; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + + of_unregister_platform_driver(&mpc52xx_uart_of_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c new file mode 100644 index 0000000..6a9c660 --- /dev/null +++ b/drivers/tty/serial/mpsc.c @@ -0,0 +1,2159 @@ +/* + * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, + * GT64260, MV64340, MV64360, GT96100, ... ). + * + * Author: Mark A. Greer + * + * Based on an old MPSC driver that was in the linuxppc tree. It appears to + * have been created by Chris Zankel (formerly of MontaVista) but there + * is no proper Copyright so I'm not sure. Apparently, parts were also + * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c + * by Russell King. + * + * 2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * The MPSC interface is much like a typical network controller's interface. + * That is, you set up separate rings of descriptors for transmitting and + * receiving data. There is also a pool of buffers with (one buffer per + * descriptor) that incoming data are dma'd into or outgoing data are dma'd + * out of. + * + * The MPSC requires two other controllers to be able to work. The Baud Rate + * Generator (BRG) provides a clock at programmable frequencies which determines + * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the + * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the + * MPSC. It is actually the SDMA interrupt that the driver uses to keep the + * transmit and receive "engines" going (i.e., indicate data has been + * transmitted or received). + * + * NOTES: + * + * 1) Some chips have an erratum where several regs cannot be + * read. To work around that, we keep a local copy of those regs in + * 'mpsc_port_info'. + * + * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr + * accesses system mem with coherency enabled. For that reason, the driver + * assumes that coherency for that ctlr has been disabled. This means + * that when in a cache coherent system, the driver has to manually manage + * the data cache on the areas that it touches because the dma_* macro are + * basically no-ops. + * + * 3) There is an erratum (on PPC) where you can't use the instruction to do + * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places + * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. + * + * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. + */ + + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \ + + MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void __iomem *mpsc_routing_base; + void __iomem *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void __iomem *mpsc_base; + void __iomem *sdma_base; + void __iomem *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + spinlock_t tx_lock; /* transmit lock */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* Main MPSC Configuration Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* Serial DMA Controller Interface Registers */ +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \ + | SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \ + | SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \ + | SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* Baud Rate Generator Interface Registers */ +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 + +/* + * Define how this driver is known to the outside (we've been assigned a + * range on the "Low-density serial ports" major). + */ +#define MPSC_MAJOR 204 +#define MPSC_MINOR_START 44 +#define MPSC_DRIVER_NAME "MPSC" +#define MPSC_DEV_NAME "ttyMM" +#define MPSC_VERSION "1.00" + +static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; +static struct mpsc_shared_regs mpsc_shared_regs; +static struct uart_driver mpsc_reg; + +static void mpsc_start_rx(struct mpsc_port_info *pi); +static void mpsc_free_ring_mem(struct mpsc_port_info *pi); +static void mpsc_release_port(struct uart_port *port); +/* + ****************************************************************************** + * + * Baud Rate Generator Routines (BRG) + * + ****************************************************************************** + */ +static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); + + if (pi->brg_can_tune) + v &= ~(1 << 25); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + + writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, + pi->brg_base + BRG_BTR); +} + +static void mpsc_brg_enable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v |= (1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +static void mpsc_brg_disable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v &= ~(1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +/* + * To set the baud, we adjust the CDV field in the BRG_BCR reg. + * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. + * However, the input clock is divided by 16 in the MPSC b/c of how + * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our + * calculation by 16 to account for that. So the real calculation + * that accounts for the way the mpsc is set up is: + * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. + */ +static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) +{ + u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; + u32 v; + + mpsc_brg_disable(pi); + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & 0xffff0000) | (cdv & 0xffff); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + mpsc_brg_enable(pi); +} + +/* + ****************************************************************************** + * + * Serial DMA Routines (SDMA) + * + ****************************************************************************** + */ + +static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) +{ + u32 v; + + pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", + pi->port.line, burst_size); + + burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ + + if (burst_size < 2) + v = 0x0; /* 1 64-bit word */ + else if (burst_size < 4) + v = 0x1; /* 2 64-bit words */ + else if (burst_size < 8) + v = 0x2; /* 4 64-bit words */ + else + v = 0x3; /* 8 64-bit words */ + + writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), + pi->sdma_base + SDMA_SDC); +} + +static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) +{ + pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, + burst_size); + + writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, + pi->sdma_base + SDMA_SDC); + mpsc_sdma_burstsize(pi, burst_size); +} + +static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) +{ + u32 old, v; + + pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); + + old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : + readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v &= ~mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + if (pi->port.line) + old >>= 8; + return old & 0xf; +} + +static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) +{ + u32 v; + + pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); + + v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m + : readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v |= mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); +} + +static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_CAUSE_m = 0; + writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE + + pi->port.line); +} + +static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, + struct mpsc_rx_desc *rxre_p) +{ + pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", + pi->port.line, (u32)rxre_p); + + writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); +} + +static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, + struct mpsc_tx_desc *txre_p) +{ + writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); + writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); +} + +static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) +{ + u32 v; + + v = readl(pi->sdma_base + SDMA_SDCM); + if (val) + v |= val; + else + v = 0; + wmb(); + writel(v, pi->sdma_base + SDMA_SDCM); + wmb(); +} + +static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi) +{ + return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; +} + +static void mpsc_sdma_start_tx(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre, *txre_p; + + /* If tx isn't running & there's a desc ready to go, start it */ + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { + txre_p = (struct mpsc_tx_desc *) + (pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE)); + + mpsc_sdma_set_tx_ring(pi, txre_p); + mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); + } + } +} + +static void mpsc_sdma_stop(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); + + /* Abort any SDMA transfers */ + mpsc_sdma_cmd(pi, 0); + mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); + + /* Clear the SDMA current and first TX and RX pointers */ + mpsc_sdma_set_tx_ring(pi, NULL); + mpsc_sdma_set_rx_ring(pi, NULL); + + /* Disable interrupts */ + mpsc_sdma_intr_mask(pi, 0xf); + mpsc_sdma_intr_ack(pi); +} + +/* + ****************************************************************************** + * + * Multi-Protocol Serial Controller Routines (MPSC) + * + ****************************************************************************** + */ + +static void mpsc_hw_init(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); + + /* Set up clock routing */ + if (pi->mirror_regs) { + v = pi->shared_regs->MPSC_MRR_m; + v &= ~0x1c7; + pi->shared_regs->MPSC_MRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = pi->shared_regs->MPSC_RCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_RCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = pi->shared_regs->MPSC_TCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_TCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } else { + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); + v &= ~0x1c7; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } + + /* Put MPSC in UART mode & enabel Tx/Rx egines */ + writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); + + /* No preamble, 16x divider, low-latency, */ + writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + mpsc_set_baudrate(pi, pi->default_baud); + + if (pi->mirror_regs) { + pi->MPSC_CHR_1_m = 0; + pi->MPSC_CHR_2_m = 0; + } + writel(0, pi->mpsc_base + MPSC_CHR_1); + writel(0, pi->mpsc_base + MPSC_CHR_2); + writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); + writel(0, pi->mpsc_base + MPSC_CHR_4); + writel(0, pi->mpsc_base + MPSC_CHR_5); + writel(0, pi->mpsc_base + MPSC_CHR_6); + writel(0, pi->mpsc_base + MPSC_CHR_7); + writel(0, pi->mpsc_base + MPSC_CHR_8); + writel(0, pi->mpsc_base + MPSC_CHR_9); + writel(0, pi->mpsc_base + MPSC_CHR_10); +} + +static void mpsc_enter_hunt(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) + udelay(10); + } +} + +static void mpsc_freeze(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v |= MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_unfreeze(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v &= ~MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + + pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); +} + +static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", + pi->port.line, len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + + v = (v & ~(1 << 14)) | ((len & 0x1) << 14); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p) +{ + u32 v; + + pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); + + v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : + readl(pi->mpsc_base + MPSC_CHR_2); + + p &= 0x3; + v = (v & ~0xc000c) | (p << 18) | (p << 2); + + if (pi->mirror_regs) + pi->MPSC_CHR_2_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_2); +} + +/* + ****************************************************************************** + * + * Driver Init Routines + * + ****************************************************************************** + */ + +static void mpsc_init_hw(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); + + mpsc_brg_init(pi, pi->brg_clk_src); + mpsc_brg_enable(pi); + mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ + mpsc_sdma_stop(pi); + mpsc_hw_init(pi); +} + +static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) +{ + int rc = 0; + + pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", + pi->port.line); + + if (!pi->dma_region) { + if (!dma_supported(pi->port.dev, 0xffffffff)) { + printk(KERN_ERR "MPSC: Inadequate DMA support\n"); + rc = -ENXIO; + } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + MPSC_DMA_ALLOC_SIZE, + &pi->dma_region_p, GFP_KERNEL)) + == NULL) { + printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); + rc = -ENOMEM; + } + } + + return rc; +} + +static void mpsc_free_ring_mem(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); + + if (pi->dma_region) { + dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p); + pi->dma_region = NULL; + pi->dma_region_p = (dma_addr_t)NULL; + } +} + +static void mpsc_init_rings(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct mpsc_tx_desc *txre; + dma_addr_t dp, dp_p; + u8 *bp, *bp_p; + int i; + + pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); + + /* + * Descriptors & buffers are multiples of cacheline size and must be + * cacheline aligned. + */ + dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment()); + dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment()); + + /* + * Partition dma region into rx ring descriptor, rx buffers, + * tx ring descriptors, and tx buffers. + */ + pi->rxr = dp; + pi->rxr_p = dp_p; + dp += MPSC_RXR_SIZE; + dp_p += MPSC_RXR_SIZE; + + pi->rxb = (u8 *)dp; + pi->rxb_p = (u8 *)dp_p; + dp += MPSC_RXB_SIZE; + dp_p += MPSC_RXB_SIZE; + + pi->rxr_posn = 0; + + pi->txr = dp; + pi->txr_p = dp_p; + dp += MPSC_TXR_SIZE; + dp_p += MPSC_TXR_SIZE; + + pi->txb = (u8 *)dp; + pi->txb_p = (u8 *)dp_p; + + pi->txr_head = 0; + pi->txr_tail = 0; + + /* Init rx ring descriptors */ + dp = pi->rxr; + dp_p = pi->rxr_p; + bp = pi->rxb; + bp_p = pi->rxb_p; + + for (i = 0; i < MPSC_RXR_ENTRIES; i++) { + rxre = (struct mpsc_rx_desc *)dp; + + rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); + rxre->bytecnt = cpu_to_be16(0); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); + rxre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_RXRE_SIZE; + dp_p += MPSC_RXRE_SIZE; + bp += MPSC_RXBE_SIZE; + bp_p += MPSC_RXBE_SIZE; + } + rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ + + /* Init tx ring descriptors */ + dp = pi->txr; + dp_p = pi->txr_p; + bp = pi->txb; + bp_p = pi->txb_p; + + for (i = 0; i < MPSC_TXR_ENTRIES; i++) { + txre = (struct mpsc_tx_desc *)dp; + + txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); + txre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_TXRE_SIZE; + dp_p += MPSC_TXRE_SIZE; + bp += MPSC_TXBE_SIZE; + bp_p += MPSC_TXBE_SIZE; + } + txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ + + dma_cache_sync(pi->port.dev, (void *)pi->dma_region, + MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)pi->dma_region, + (ulong)pi->dma_region + + MPSC_DMA_ALLOC_SIZE); +#endif + + return; +} + +static void mpsc_uninit_rings(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + pi->rxr = 0; + pi->rxr_p = 0; + pi->rxb = NULL; + pi->rxb_p = NULL; + pi->rxr_posn = 0; + + pi->txr = 0; + pi->txr_p = 0; + pi->txb = NULL; + pi->txb_p = NULL; + pi->txr_head = 0; + pi->txr_tail = 0; +} + +static int mpsc_make_ready(struct mpsc_port_info *pi) +{ + int rc; + + pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); + + if (!pi->ready) { + mpsc_init_hw(pi); + if ((rc = mpsc_alloc_ring_mem(pi))) + return rc; + mpsc_init_rings(pi); + pi->ready = 1; + } + + return 0; +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + ****************************************************************************** + * + * Interrupt Handling Routines + * + ****************************************************************************** + */ + +static int mpsc_rx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct tty_struct *tty = pi->port.state->port.tty; + u32 cmdstat, bytes_in, i; + int rc = 0; + u8 *bp; + char flag = TTY_NORMAL; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* + * Loop through Rx descriptors handling ones that have been completed. + */ + while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) + & SDMA_DESC_CMDSTAT_O)) { + bytes_in = be16_to_cpu(rxre->bytecnt); +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + /* Following use of tty struct directly is deprecated */ + if (unlikely(tty_buffer_request_room(tty, bytes_in) + < bytes_in)) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the bytes + * but must do so to clear interrupts. + */ + } + + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + + /* + * Other than for parity error, the manual provides little + * info on what data will be in a frame flagged by any of + * these errors. For parity error, it is the last byte in + * the buffer that had the error. As for the rest, I guess + * we'll assume there is no data in the buffer. + * If there is...it gets lost. + */ + if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) { + + pi->port.icount.rx++; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ + pi->port.icount.brk++; + + if (uart_handle_break(&pi->port)) + goto next_frame; + } else if (cmdstat & SDMA_DESC_CMDSTAT_FR) { + pi->port.icount.frame++; + } else if (cmdstat & SDMA_DESC_CMDSTAT_OR) { + pi->port.icount.overrun++; + } + + cmdstat &= pi->port.read_status_mask; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) + flag = TTY_BREAK; + else if (cmdstat & SDMA_DESC_CMDSTAT_FR) + flag = TTY_FRAME; + else if (cmdstat & SDMA_DESC_CMDSTAT_OR) + flag = TTY_OVERRUN; + else if (cmdstat & SDMA_DESC_CMDSTAT_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(&pi->port, *bp)) { + bp++; + bytes_in--; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + goto next_frame; + } + + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) + && !(cmdstat & pi->port.ignore_status_mask)) { + tty_insert_flip_char(tty, *bp, flag); + } else { + for (i=0; iport.icount.rx += bytes_in; + } + +next_frame: + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *) + (pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + rc = 1; + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + + tty_flip_buffer_push(tty); + return rc; +} + +static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) +{ + struct mpsc_tx_desc *txre; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_head * MPSC_TXRE_SIZE)); + + txre->bytecnt = cpu_to_be16(count); + txre->shadow = txre->bytecnt; + wmb(); /* ensure cmdstat is last field updated */ + txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L + | ((intr) ? SDMA_DESC_CMDSTAT_EI : 0)); + wmb(); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif +} + +static void mpsc_copy_tx_data(struct mpsc_port_info *pi) +{ + struct circ_buf *xmit = &pi->port.state->xmit; + u8 *bp; + u32 i; + + /* Make sure the desc ring isn't full */ + while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) + < (MPSC_TXR_ENTRIES - 1)) { + if (pi->port.x_char) { + /* + * Ideally, we should use the TCS field in + * CHR_1 to put the x_char out immediately but + * errata prevents us from being able to read + * CHR_2 to know that its safe to write to + * CHR_1. Instead, just put it in-band with + * all the other Tx data. + */ + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + *bp = pi->port.x_char; + pi->port.x_char = 0; + i = 1; + } else if (!uart_circ_empty(xmit) + && !uart_tx_stopped(&pi->port)) { + i = min((u32)MPSC_TXBE_SIZE, + (u32)uart_circ_chars_pending(xmit)); + i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE)); + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + memcpy(bp, &xmit->buf[xmit->tail], i); + xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&pi->port); + } else { /* All tx data copied into ring bufs */ + return; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 1); + + /* Advance to next descriptor */ + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + } +} + +static int mpsc_tx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre; + int rc = 0; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { + rc = 1; + pi->port.icount.tx += be16_to_cpu(txre->bytecnt); + pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); + + /* If no more data to tx, fall out of loop */ + if (pi->txr_head == pi->txr_tail) + break; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, + MPSC_TXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + } + + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); /* start next desc if ready */ + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + return rc; +} + +/* + * This is the driver's interrupt handler. To avoid a race, we first clear + * the interrupt, then handle any completed Rx/Tx descriptors. When done + * handling those descriptors, we restart the Rx/Tx engines if they're stopped. + */ +static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) +{ + struct mpsc_port_info *pi = dev_id; + ulong iflags; + int rc = IRQ_NONE; + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); + + spin_lock_irqsave(&pi->port.lock, iflags); + mpsc_sdma_intr_ack(pi); + if (mpsc_rx_intr(pi)) + rc = IRQ_HANDLED; + if (mpsc_tx_intr(pi)) + rc = IRQ_HANDLED; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); + return rc; +} + +/* + ****************************************************************************** + * + * serial_core.c Interface routines + * + ****************************************************************************** + */ +static uint mpsc_tx_empty(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong iflags; + uint rc; + + spin_lock_irqsave(&pi->port.lock, iflags); + rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + return rc; +} + +static void mpsc_set_mctrl(struct uart_port *port, uint mctrl) +{ + /* Have no way to set modem control lines AFAICT */ +} + +static uint mpsc_get_mctrl(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 mflags, status; + + status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m + : readl(pi->mpsc_base + MPSC_CHR_10); + + mflags = 0; + if (status & 0x1) + mflags |= TIOCM_CTS; + if (status & 0x2) + mflags |= TIOCM_CAR; + + return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ +} + +static void mpsc_stop_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_tx[%d]\n", port->line); + + mpsc_freeze(pi); +} + +static void mpsc_start_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + mpsc_unfreeze(pi); + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + + pr_debug("mpsc_start_tx[%d]\n", port->line); +} + +static void mpsc_start_rx(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); + + if (pi->rcv_data) { + mpsc_enter_hunt(pi); + mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); + } +} + +static void mpsc_stop_rx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA) + udelay(10); + } + + mpsc_sdma_cmd(pi, SDMA_SDCM_AR); +} + +static void mpsc_enable_ms(struct uart_port *port) +{ +} + +static void mpsc_break_ctl(struct uart_port *port, int ctl) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong flags; + u32 v; + + v = ctl ? 0x00ff0000 : 0; + + spin_lock_irqsave(&pi->port.lock, flags); + if (pi->mirror_regs) + pi->MPSC_CHR_1_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_1); + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static int mpsc_startup(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 flag = 0; + int rc; + + pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", + port->line, pi->port.irq); + + if ((rc = mpsc_make_ready(pi)) == 0) { + /* Setup IRQ handler */ + mpsc_sdma_intr_ack(pi); + + /* If irq's are shared, need to set flag */ + if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) + flag = IRQF_SHARED; + + if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, + "mpsc-sdma", pi)) + printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", + pi->port.irq); + + mpsc_sdma_intr_unmask(pi, 0xf); + mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p + + (pi->rxr_posn * MPSC_RXRE_SIZE))); + } + + return rc; +} + +static void mpsc_shutdown(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); + + mpsc_sdma_stop(pi); + free_irq(pi->port.irq, pi); +} + +static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 baud; + ulong flags; + u32 chr_bits, stop_bits, par; + + pi->c_iflag = termios->c_iflag; + pi->c_cflag = termios->c_cflag; + + switch (termios->c_cflag & CSIZE) { + case CS5: + chr_bits = MPSC_MPCR_CL_5; + break; + case CS6: + chr_bits = MPSC_MPCR_CL_6; + break; + case CS7: + chr_bits = MPSC_MPCR_CL_7; + break; + case CS8: + default: + chr_bits = MPSC_MPCR_CL_8; + break; + } + + if (termios->c_cflag & CSTOPB) + stop_bits = MPSC_MPCR_SBL_2; + else + stop_bits = MPSC_MPCR_SBL_1; + + par = MPSC_CHR_2_PAR_EVEN; + if (termios->c_cflag & PARENB) + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_ODD; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_MARK; + else + par = MPSC_CHR_2_PAR_SPACE; + } +#endif + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + + spin_lock_irqsave(&pi->port.lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + mpsc_set_char_length(pi, chr_bits); + mpsc_set_stop_bit_length(pi, stop_bits); + mpsc_set_parity(pi, par); + mpsc_set_baudrate(pi, baud); + + /* Characters/events to read */ + pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; + + if (termios->c_iflag & INPCK) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & (BRKINT | PARMRK)) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; + + /* Characters/events to ignore */ + pi->port.ignore_status_mask = 0; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & IGNBRK) { + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; + } + + if ((termios->c_cflag & CREAD)) { + if (!pi->rcv_data) { + pi->rcv_data = 1; + mpsc_start_rx(pi); + } + } else if (pi->rcv_data) { + mpsc_stop_rx(port); + pi->rcv_data = 0; + } + + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static const char *mpsc_type(struct uart_port *port) +{ + pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); + return MPSC_DRIVER_NAME; +} + +static int mpsc_request_port(struct uart_port *port) +{ + /* Should make chip/platform specific call */ + return 0; +} + +static void mpsc_release_port(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + if (pi->ready) { + mpsc_uninit_rings(pi); + mpsc_free_ring_mem(pi); + pi->ready = 0; + } +} + +static void mpsc_config_port(struct uart_port *port, int flags) +{ +} + +static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + int rc = 0; + + pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) + rc = -EINVAL; + else if (pi->port.irq != ser->irq) + rc = -EINVAL; + else if (ser->io_type != SERIAL_IO_MEM) + rc = -EINVAL; + else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ + rc = -EINVAL; + else if ((void *)pi->port.mapbase != ser->iomem_base) + rc = -EINVAL; + else if (pi->port.iobase != ser->port) + rc = -EINVAL; + else if (ser->hub6 != 0) + rc = -EINVAL; + + return rc; +} +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static char poll_buf[2048]; +static int poll_ptr; +static int poll_cnt; +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c); + +static int mpsc_get_poll_char(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + struct mpsc_rx_desc *rxre; + u32 cmdstat, bytes_in, i; + u8 *bp; + + if (!serial_polled) + serial_polled = 1; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + poll_ptr = 0; + poll_cnt = 0; + + while (poll_cnt == 0) { + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn*MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + /* + * Loop through Rx descriptors handling ones that have + * been completed. + */ + while (poll_cnt == 0 && + !((cmdstat = be32_to_cpu(rxre->cmdstat)) & + SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *) bp, + MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) { + poll_buf[poll_cnt] = *bp; + poll_cnt++; + } else { + for (i = 0; i < bytes_in; i++) { + poll_buf[poll_cnt] = *bp++; + poll_cnt++; + } + pi->port.icount.rx += bytes_in; + } + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & + (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + } + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + + return 0; +} + + +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 data; + + data = readl(pi->mpsc_base + MPSC_MPCR); + writeb(c, pi->mpsc_base + MPSC_CHR_1); + mb(); + data = readl(pi->mpsc_base + MPSC_CHR_2); + data |= MPSC_CHR_2_TTCS; + writel(data, pi->mpsc_base + MPSC_CHR_2); + mb(); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); +} +#endif + +static struct uart_ops mpsc_pops = { + .tx_empty = mpsc_tx_empty, + .set_mctrl = mpsc_set_mctrl, + .get_mctrl = mpsc_get_mctrl, + .stop_tx = mpsc_stop_tx, + .start_tx = mpsc_start_tx, + .stop_rx = mpsc_stop_rx, + .enable_ms = mpsc_enable_ms, + .break_ctl = mpsc_break_ctl, + .startup = mpsc_startup, + .shutdown = mpsc_shutdown, + .set_termios = mpsc_set_termios, + .type = mpsc_type, + .release_port = mpsc_release_port, + .request_port = mpsc_request_port, + .config_port = mpsc_config_port, + .verify_port = mpsc_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mpsc_get_poll_char, + .poll_put_char = mpsc_put_poll_char, +#endif +}; + +/* + ****************************************************************************** + * + * Console Interface Routines + * + ****************************************************************************** + */ + +#ifdef CONFIG_SERIAL_MPSC_CONSOLE +static void mpsc_console_write(struct console *co, const char *s, uint count) +{ + struct mpsc_port_info *pi = &mpsc_ports[co->index]; + u8 *bp, *dp, add_cr = 0; + int i; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + while (pi->txr_head != pi->txr_tail) { + while (mpsc_sdma_tx_active(pi)) + udelay(100); + mpsc_sdma_intr_ack(pi); + mpsc_tx_intr(pi); + } + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + while (count > 0) { + bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + + for (i = 0; i < MPSC_TXBE_SIZE; i++) { + if (count == 0) + break; + + if (add_cr) { + *(dp++) = '\r'; + add_cr = 0; + } else { + *(dp++) = *s; + + if (*(s++) == '\n') { /* add '\r' after '\n' */ + add_cr = 1; + count++; + } + } + + count--; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 0); + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + mpsc_sdma_start_tx(pi); + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); +} + +static int __init mpsc_console_setup(struct console *co, char *options) +{ + struct mpsc_port_info *pi; + int baud, bits, parity, flow; + + pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); + + if (co->index >= MPSC_NUM_CTLRS) + co->index = 0; + + pi = &mpsc_ports[co->index]; + + baud = pi->default_baud; + bits = pi->default_bits; + parity = pi->default_parity; + flow = pi->default_flow; + + if (!pi->port.ops) + return -ENODEV; + + spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&pi->port, co, baud, parity, bits, flow); +} + +static struct console mpsc_console = { + .name = MPSC_DEV_NAME, + .write = mpsc_console_write, + .device = uart_console_device, + .setup = mpsc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mpsc_reg, +}; + +static int __init mpsc_late_console_init(void) +{ + pr_debug("mpsc_late_console_init: Enter\n"); + + if (!(mpsc_console.flags & CON_ENABLED)) + register_console(&mpsc_console); + return 0; +} + +late_initcall(mpsc_late_console_init); + +#define MPSC_CONSOLE &mpsc_console +#else +#define MPSC_CONSOLE NULL +#endif +/* + ****************************************************************************** + * + * Dummy Platform Driver to extract & map shared register regions + * + ****************************************************************************** + */ +static void mpsc_resource_err(char *s) +{ + printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); +} + +static int mpsc_shared_map_regs(struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_ROUTING_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE, + "mpsc_routing_regs")) { + mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_shared_regs.mpsc_routing_base_p = r->start; + } else { + mpsc_resource_err("MPSC routing base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_INTR_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE, + "sdma_intr_regs")) { + mpsc_shared_regs.sdma_intr_base = ioremap(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + mpsc_shared_regs.sdma_intr_base_p = r->start; + } else { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_resource_err("SDMA intr base"); + return -ENOMEM; + } + + return 0; +} + +static void mpsc_shared_unmap_regs(void) +{ + if (!mpsc_shared_regs.mpsc_routing_base) { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + } + if (!mpsc_shared_regs.sdma_intr_base) { + iounmap(mpsc_shared_regs.sdma_intr_base); + release_mem_region(mpsc_shared_regs.sdma_intr_base_p, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + } + + mpsc_shared_regs.mpsc_routing_base = NULL; + mpsc_shared_regs.sdma_intr_base = NULL; + + mpsc_shared_regs.mpsc_routing_base_p = 0; + mpsc_shared_regs.sdma_intr_base_p = 0; +} + +static int mpsc_shared_drv_probe(struct platform_device *dev) +{ + struct mpsc_shared_pdata *pdata; + int rc = -ENODEV; + + if (dev->id == 0) { + if (!(rc = mpsc_shared_map_regs(dev))) { + pdata = (struct mpsc_shared_pdata *) + dev->dev.platform_data; + + mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; + mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; + mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = + pdata->intr_cause_val; + mpsc_shared_regs.SDMA_INTR_MASK_m = + pdata->intr_mask_val; + + rc = 0; + } + } + + return rc; +} + +static int mpsc_shared_drv_remove(struct platform_device *dev) +{ + int rc = -ENODEV; + + if (dev->id == 0) { + mpsc_shared_unmap_regs(); + mpsc_shared_regs.MPSC_MRR_m = 0; + mpsc_shared_regs.MPSC_RCRR_m = 0; + mpsc_shared_regs.MPSC_TCRR_m = 0; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; + mpsc_shared_regs.SDMA_INTR_MASK_m = 0; + rc = 0; + } + + return rc; +} + +static struct platform_driver mpsc_shared_driver = { + .probe = mpsc_shared_drv_probe, + .remove = mpsc_shared_drv_remove, + .driver = { + .name = MPSC_SHARED_NAME, + }, +}; + +/* + ****************************************************************************** + * + * Driver Interface Routines + * + ****************************************************************************** + */ +static struct uart_driver mpsc_reg = { + .owner = THIS_MODULE, + .driver_name = MPSC_DRIVER_NAME, + .dev_name = MPSC_DEV_NAME, + .major = MPSC_MAJOR, + .minor = MPSC_MINOR_START, + .nr = MPSC_NUM_CTLRS, + .cons = MPSC_CONSOLE, +}; + +static int mpsc_drv_map_regs(struct mpsc_port_info *pi, + struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) + && request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, + "mpsc_regs")) { + pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); + pi->mpsc_base_p = r->start; + } else { + mpsc_resource_err("MPSC base"); + goto err; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { + pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); + pi->sdma_base_p = r->start; + } else { + mpsc_resource_err("SDMA base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + goto err; + } + + if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) { + pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); + pi->brg_base_p = r->start; + } else { + mpsc_resource_err("BRG base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + if (pi->sdma_base) { + iounmap(pi->sdma_base); + pi->sdma_base = NULL; + } + goto err; + } + return 0; + +err: + return -ENOMEM; +} + +static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi) +{ + if (!pi->mpsc_base) { + iounmap(pi->mpsc_base); + release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); + } + if (!pi->sdma_base) { + iounmap(pi->sdma_base); + release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); + } + if (!pi->brg_base) { + iounmap(pi->brg_base); + release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); + } + + pi->mpsc_base = NULL; + pi->sdma_base = NULL; + pi->brg_base = NULL; + + pi->mpsc_base_p = 0; + pi->sdma_base_p = 0; + pi->brg_base_p = 0; +} + +static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, + struct platform_device *pd, int num) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pd->dev.platform_data; + + pi->port.uartclk = pdata->brg_clk_freq; + pi->port.iotype = UPIO_MEM; + pi->port.line = num; + pi->port.type = PORT_MPSC; + pi->port.fifosize = MPSC_TXBE_SIZE; + pi->port.membase = pi->mpsc_base; + pi->port.mapbase = (ulong)pi->mpsc_base; + pi->port.ops = &mpsc_pops; + + pi->mirror_regs = pdata->mirror_regs; + pi->cache_mgmt = pdata->cache_mgmt; + pi->brg_can_tune = pdata->brg_can_tune; + pi->brg_clk_src = pdata->brg_clk_src; + pi->mpsc_max_idle = pdata->max_idle; + pi->default_baud = pdata->default_baud; + pi->default_bits = pdata->default_bits; + pi->default_parity = pdata->default_parity; + pi->default_flow = pdata->default_flow; + + /* Initial values of mirrored regs */ + pi->MPSC_CHR_1_m = pdata->chr_1_val; + pi->MPSC_CHR_2_m = pdata->chr_2_val; + pi->MPSC_CHR_10_m = pdata->chr_10_val; + pi->MPSC_MPCR_m = pdata->mpcr_val; + pi->BRG_BCR_m = pdata->bcr_val; + + pi->shared_regs = &mpsc_shared_regs; + + pi->port.irq = platform_get_irq(pd, 0); +} + +static int mpsc_drv_probe(struct platform_device *dev) +{ + struct mpsc_port_info *pi; + int rc = -ENODEV; + + pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + pi = &mpsc_ports[dev->id]; + + if (!(rc = mpsc_drv_map_regs(pi, dev))) { + mpsc_drv_get_platform_data(pi, dev, dev->id); + pi->port.dev = &dev->dev; + + if (!(rc = mpsc_make_ready(pi))) { + spin_lock_init(&pi->tx_lock); + if (!(rc = uart_add_one_port(&mpsc_reg, + &pi->port))) { + rc = 0; + } else { + mpsc_release_port((struct uart_port *) + pi); + mpsc_drv_unmap_regs(pi); + } + } else { + mpsc_drv_unmap_regs(pi); + } + } + } + + return rc; +} + +static int mpsc_drv_remove(struct platform_device *dev) +{ + pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); + mpsc_release_port((struct uart_port *) + &mpsc_ports[dev->id].port); + mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); + return 0; + } else { + return -ENODEV; + } +} + +static struct platform_driver mpsc_driver = { + .probe = mpsc_drv_probe, + .remove = mpsc_drv_remove, + .driver = { + .name = MPSC_CTLR_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mpsc_drv_init(void) +{ + int rc; + + printk(KERN_INFO "Serial: MPSC driver\n"); + + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); + + if (!(rc = uart_register_driver(&mpsc_reg))) { + if (!(rc = platform_driver_register(&mpsc_shared_driver))) { + if ((rc = platform_driver_register(&mpsc_driver))) { + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + } + } else { + uart_unregister_driver(&mpsc_reg); + } + } + + return rc; +} + +static void __exit mpsc_drv_exit(void) +{ + platform_driver_unregister(&mpsc_driver); + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); +} + +module_init(mpsc_drv_init); +module_exit(mpsc_drv_exit); + +MODULE_AUTHOR("Mark A. Greer "); +MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); +MODULE_VERSION(MPSC_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); +MODULE_ALIAS("platform:" MPSC_CTLR_NAME); diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c new file mode 100644 index 0000000..b62857b --- /dev/null +++ b/drivers/tty/serial/mrst_max3110.c @@ -0,0 +1,919 @@ +/* + * mrst_max3110.c - spi uart protocol driver for Maxim 3110 + * + * Copyright (c) 2008-2010, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/* + * Note: + * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has + * 1 word. If SPI master controller doesn't support sclk frequency change, + * then the char need be sent out one by one with some delay + * + * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE + * interrupt for a low speed UART device + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "mrst_max3110.h" + +#define PR_FMT "mrst_max3110: " + +#define UART_TX_NEEDED 1 +#define CON_TX_NEEDED 2 +#define BIT_IRQ_PENDING 3 + +struct uart_max3110 { + struct uart_port port; + struct spi_device *spi; + char name[24]; + + wait_queue_head_t wq; + struct task_struct *main_thread; + struct task_struct *read_thread; + struct mutex thread_mutex;; + + u32 baud; + u16 cur_conf; + u8 clock; + u8 parity, word_7bits; + u16 irq; + + unsigned long uart_flags; + + /* console related */ + struct circ_buf con_xmit; +}; + +/* global data structure, may need be removed */ +static struct uart_max3110 *pmax; + +static void receive_chars(struct uart_max3110 *max, + unsigned char *str, int len); +static int max3110_read_multi(struct uart_max3110 *max, u8 *buf); +static void max3110_con_receive(struct uart_max3110 *max); + +static int max3110_write_then_read(struct uart_max3110 *max, + const void *txbuf, void *rxbuf, unsigned len, int always_fast) +{ + struct spi_device *spi = max->spi; + struct spi_message message; + struct spi_transfer x; + int ret; + + spi_message_init(&message); + memset(&x, 0, sizeof x); + x.len = len; + x.tx_buf = txbuf; + x.rx_buf = rxbuf; + spi_message_add_tail(&x, &message); + + if (always_fast) + x.speed_hz = spi->max_speed_hz; + else if (max->baud) + x.speed_hz = max->baud; + + /* Do the i/o */ + ret = spi_sync(spi, &message); + return ret; +} + +/* Write a 16b word to the device */ +static int max3110_out(struct uart_max3110 *max, const u16 out) +{ + void *buf; + u16 *obuf, *ibuf; + u8 ch; + int ret; + + buf = kzalloc(8, GFP_KERNEL | GFP_DMA); + if (!buf) + return -ENOMEM; + + obuf = buf; + ibuf = buf + 4; + *obuf = out; + ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); + if (ret) { + pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n", + __func__, ret, out); + goto exit; + } + + /* If some valid data is read back */ + if (*ibuf & MAX3110_READ_DATA_AVAILABLE) { + ch = *ibuf & 0xff; + receive_chars(max, &ch, 1); + } + +exit: + kfree(buf); + return ret; +} + +/* + * This is usually used to read data from SPIC RX FIFO, which doesn't + * need any delay like flushing character out. + * + * Return how many valide bytes are read back + */ +static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf) +{ + void *buf; + u16 *obuf, *ibuf; + u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH]; + int i, j, blen; + + blen = M3110_RX_FIFO_DEPTH * sizeof(u16); + buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); + if (!buf) { + pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__); + return 0; + } + + /* tx/rx always have the same length */ + obuf = buf; + ibuf = buf + blen; + + if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) { + kfree(buf); + return 0; + } + + /* If caller doesn't provide a buffer, then handle received char */ + pbuf = rxbuf ? rxbuf : valid_str; + + for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + pbuf[j++] = ibuf[i] & 0xff; + } + + if (j && (pbuf == valid_str)) + receive_chars(max, valid_str, j); + + kfree(buf); + return j; +} + +static void serial_m3110_con_putchar(struct uart_port *port, int ch) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + struct circ_buf *xmit = &max->con_xmit; + + if (uart_circ_chars_free(xmit)) { + xmit->buf[xmit->head] = (char)ch; + xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void serial_m3110_con_write(struct console *co, + const char *s, unsigned int count) +{ + if (!pmax) + return; + + uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); + + if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags)) + wake_up_process(pmax->main_thread); +} + +static int __init +serial_m3110_con_setup(struct console *co, char *options) +{ + struct uart_max3110 *max = pmax; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_info(PR_FMT "setting up console\n"); + + if (co->index == -1) + co->index = 0; + + if (!max) { + pr_err(PR_FMT "pmax is NULL, return"); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&max->port, co, baud, parity, bits, flow); +} + +static struct tty_driver *serial_m3110_con_device(struct console *co, + int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +static struct uart_driver serial_m3110_reg; +static struct console serial_m3110_console = { + .name = "ttyS", + .write = serial_m3110_con_write, + .device = serial_m3110_con_device, + .setup = serial_m3110_con_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_m3110_reg, +}; + +static unsigned int serial_m3110_tx_empty(struct uart_port *port) +{ + return 1; +} + +static void serial_m3110_stop_tx(struct uart_port *port) +{ + return; +} + +/* stop_rx will be called in spin_lock env */ +static void serial_m3110_stop_rx(struct uart_port *port) +{ + return; +} + +#define WORDS_PER_XFER 128 +static void send_circ_buf(struct uart_max3110 *max, + struct circ_buf *xmit) +{ + void *buf; + u16 *obuf, *ibuf; + u8 valid_str[WORDS_PER_XFER]; + int i, j, len, blen, dma_size, left, ret = 0; + + + dma_size = WORDS_PER_XFER * sizeof(u16) * 2; + buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA); + if (!buf) + return; + obuf = buf; + ibuf = buf + dma_size/2; + + while (!uart_circ_empty(xmit)) { + left = uart_circ_chars_pending(xmit); + while (left) { + len = min(left, WORDS_PER_XFER); + blen = len * sizeof(u16); + memset(ibuf, 0, blen); + + for (i = 0; i < len; i++) { + obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + } + + /* Fail to send msg to console is not very critical */ + ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); + if (ret) + pr_warning(PR_FMT "%s(): get err msg %d\n", + __func__, ret); + + for (i = 0, j = 0; i < len; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + valid_str[j++] = ibuf[i] & 0xff; + } + + if (j) + receive_chars(max, valid_str, j); + + max->port.icount.tx += len; + left -= len; + } + } + + kfree(buf); +} + +static void transmit_char(struct uart_max3110 *max) +{ + struct uart_port *port = &max->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + send_circ_buf(max, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial_m3110_stop_tx(port); +} + +/* + * This will be called by uart_write() and tty_write, can't + * go to sleep + */ +static void serial_m3110_start_tx(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + + if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) + wake_up_process(max->main_thread); +} + +static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) +{ + struct uart_port *port = &max->port; + struct tty_struct *tty; + int usable; + + /* If uart is not opened, just return */ + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + while (len) { + usable = tty_buffer_request_room(tty, len); + if (usable) { + tty_insert_flip_string(tty, str, usable); + str += usable; + port->icount.rx += usable; + } + len -= usable; + } + tty_flip_buffer_push(tty); +} + +/* + * This routine will be used in read_thread or RX IRQ handling, + * it will first do one round buffer read(8 words), if there is some + * valid RX data, will try to read 5 more rounds till all data + * is read out. + * + * Use stack space as data buffer to save some system load, and chose + * 504 Btyes as a threadhold to do a bulk push to upper tty layer when + * receiving bulk data, a much bigger buffer may cause stack overflow + */ +static void max3110_con_receive(struct uart_max3110 *max) +{ + int loop = 1, num, total = 0; + u8 recv_buf[512], *pbuf; + + pbuf = recv_buf; + do { + num = max3110_read_multi(max, pbuf); + + if (num) { + loop = 5; + pbuf += num; + total += num; + + if (total >= 504) { + receive_chars(max, recv_buf, total); + pbuf = recv_buf; + total = 0; + } + } + } while (--loop); + + if (total) + receive_chars(max, recv_buf, total); +} + +static int max3110_main_thread(void *_max) +{ + struct uart_max3110 *max = _max; + wait_queue_head_t *wq = &max->wq; + int ret = 0; + struct circ_buf *xmit = &max->con_xmit; + + init_waitqueue_head(wq); + pr_info(PR_FMT "start main thread\n"); + + do { + wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); + + mutex_lock(&max->thread_mutex); + + if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) + max3110_con_receive(max); + + /* first handle console output */ + if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) + send_circ_buf(max, xmit); + + /* handle uart output */ + if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) + transmit_char(max); + + mutex_unlock(&max->thread_mutex); + + } while (!kthread_should_stop()); + + return ret; +} + +static irqreturn_t serial_m3110_irq(int irq, void *dev_id) +{ + struct uart_max3110 *max = dev_id; + + /* max3110's irq is a falling edge, not level triggered, + * so no need to disable the irq */ + if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) + wake_up_process(max->main_thread); + + return IRQ_HANDLED; +} + +/* if don't use RX IRQ, then need a thread to polling read */ +static int max3110_read_thread(void *_max) +{ + struct uart_max3110 *max = _max; + + pr_info(PR_FMT "start read thread\n"); + do { + /* + * If can't acquire the mutex, it means the main thread + * is running which will also perform the rx job + */ + if (mutex_trylock(&max->thread_mutex)) { + max3110_con_receive(max); + mutex_unlock(&max->thread_mutex); + } + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ / 20); + } while (!kthread_should_stop()); + + return 0; +} + +static int serial_m3110_startup(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config = 0; + int ret = 0; + + if (port->line != 0) { + pr_err(PR_FMT "uart port startup failed\n"); + return -1; + } + + /* Disable all IRQ and config it to 115200, 8n1 */ + config = WC_TAG | WC_FIFO_ENABLE + | WC_1_STOPBITS + | WC_8BIT_WORD + | WC_BAUD_DR2; + + /* as we use thread to handle tx/rx, need set low latency */ + port->state->port.tty->low_latency = 1; + + if (max->irq) { + max->read_thread = NULL; + ret = request_irq(max->irq, serial_m3110_irq, + IRQ_TYPE_EDGE_FALLING, "max3110", max); + if (ret) { + max->irq = 0; + pr_err(PR_FMT "unable to allocate IRQ, polling\n"); + } else { + /* Enable RX IRQ only */ + config |= WC_RXA_IRQ_ENABLE; + } + } + + if (max->irq == 0) { + /* If IRQ is disabled, start a read thread for input data */ + max->read_thread = + kthread_run(max3110_read_thread, max, "max3110_read"); + if (IS_ERR(max->read_thread)) { + ret = PTR_ERR(max->read_thread); + max->read_thread = NULL; + pr_err(PR_FMT "Can't create read thread!\n"); + return ret; + } + } + + ret = max3110_out(max, config); + if (ret) { + if (max->irq) + free_irq(max->irq, max); + if (max->read_thread) + kthread_stop(max->read_thread); + max->read_thread = NULL; + return ret; + } + + max->cur_conf = config; + return 0; +} + +static void serial_m3110_shutdown(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config; + + if (max->read_thread) { + kthread_stop(max->read_thread); + max->read_thread = NULL; + } + + if (max->irq) + free_irq(max->irq, max); + + /* Disable interrupts from this port */ + config = WC_TAG | WC_SW_SHDI; + max3110_out(max, config); +} + +static void serial_m3110_release_port(struct uart_port *port) +{ +} + +static int serial_m3110_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_m3110_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MAX3100; +} + +static int +serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + + +static const char *serial_m3110_type(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + return max->name; +} + +static void +serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + unsigned char cval; + unsigned int baud, parity = 0; + int clk_div = -1; + u16 new_conf = max->cur_conf; + + switch (termios->c_cflag & CSIZE) { + case CS7: + cval = UART_LCR_WLEN7; + new_conf |= WC_7BIT_WORD; + break; + default: + /* We only support CS7 & CS8 */ + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + case CS8: + cval = UART_LCR_WLEN8; + new_conf |= WC_8BIT_WORD; + break; + } + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); + + /* First calc the div for 1.8MHZ clock case */ + switch (baud) { + case 300: + clk_div = WC_BAUD_DR384; + break; + case 600: + clk_div = WC_BAUD_DR192; + break; + case 1200: + clk_div = WC_BAUD_DR96; + break; + case 2400: + clk_div = WC_BAUD_DR48; + break; + case 4800: + clk_div = WC_BAUD_DR24; + break; + case 9600: + clk_div = WC_BAUD_DR12; + break; + case 19200: + clk_div = WC_BAUD_DR6; + break; + case 38400: + clk_div = WC_BAUD_DR3; + break; + case 57600: + clk_div = WC_BAUD_DR2; + break; + case 115200: + clk_div = WC_BAUD_DR1; + break; + case 230400: + if (max->clock & MAX3110_HIGH_CLK) + break; + default: + /* Pick the previous baud rate */ + baud = max->baud; + clk_div = max->cur_conf & WC_BAUD_DIV_MASK; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + if (max->clock & MAX3110_HIGH_CLK) { + clk_div += 1; + /* High clk version max3110 doesn't support B300 */ + if (baud == 300) { + baud = 600; + clk_div = WC_BAUD_DR384; + } + if (baud == 230400) + clk_div = WC_BAUD_DR1; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; + + if (unlikely(termios->c_cflag & CMSPAR)) + termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + new_conf |= WC_2_STOPBITS; + else + new_conf &= ~WC_2_STOPBITS; + + if (termios->c_cflag & PARENB) { + new_conf |= WC_PARITY_ENABLE; + parity |= UART_LCR_PARITY; + } else + new_conf &= ~WC_PARITY_ENABLE; + + if (!(termios->c_cflag & PARODD)) + parity |= UART_LCR_EPAR; + max->parity = parity; + + uart_update_timeout(port, termios->c_cflag, baud); + + new_conf |= WC_TAG; + if (new_conf != max->cur_conf) { + if (!max3110_out(max, new_conf)) { + max->cur_conf = new_conf; + max->baud = baud; + } + } +} + +/* Don't handle hw handshaking */ +static unsigned int serial_m3110_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; +} + +static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial_m3110_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void serial_m3110_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_m3110_enable_ms(struct uart_port *port) +{ +} + +struct uart_ops serial_m3110_ops = { + .tx_empty = serial_m3110_tx_empty, + .set_mctrl = serial_m3110_set_mctrl, + .get_mctrl = serial_m3110_get_mctrl, + .stop_tx = serial_m3110_stop_tx, + .start_tx = serial_m3110_start_tx, + .stop_rx = serial_m3110_stop_rx, + .enable_ms = serial_m3110_enable_ms, + .break_ctl = serial_m3110_break_ctl, + .startup = serial_m3110_startup, + .shutdown = serial_m3110_shutdown, + .set_termios = serial_m3110_set_termios, + .pm = serial_m3110_pm, + .type = serial_m3110_type, + .release_port = serial_m3110_release_port, + .request_port = serial_m3110_request_port, + .config_port = serial_m3110_config_port, + .verify_port = serial_m3110_verify_port, +}; + +static struct uart_driver serial_m3110_reg = { + .owner = THIS_MODULE, + .driver_name = "MRST serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 1, + .cons = &serial_m3110_console, +}; + +#ifdef CONFIG_PM +static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) +{ + struct uart_max3110 *max = spi_get_drvdata(spi); + + disable_irq(max->irq); + uart_suspend_port(&serial_m3110_reg, &max->port); + max3110_out(max, max->cur_conf | WC_SW_SHDI); + return 0; +} + +static int serial_m3110_resume(struct spi_device *spi) +{ + struct uart_max3110 *max = spi_get_drvdata(spi); + + max3110_out(max, max->cur_conf); + uart_resume_port(&serial_m3110_reg, &max->port); + enable_irq(max->irq); + return 0; +} +#else +#define serial_m3110_suspend NULL +#define serial_m3110_resume NULL +#endif + +static int __devinit serial_m3110_probe(struct spi_device *spi) +{ + struct uart_max3110 *max; + void *buffer; + u16 res; + int ret = 0; + + max = kzalloc(sizeof(*max), GFP_KERNEL); + if (!max) + return -ENOMEM; + + /* Set spi info */ + spi->bits_per_word = 16; + max->clock = MAX3110_HIGH_CLK; + + spi_setup(spi); + + max->port.type = PORT_MAX3100; + max->port.fifosize = 2; /* Only have 16b buffer */ + max->port.ops = &serial_m3110_ops; + max->port.line = 0; + max->port.dev = &spi->dev; + max->port.uartclk = 115200; + + max->spi = spi; + strcpy(max->name, spi->modalias); + max->irq = (u16)spi->irq; + + mutex_init(&max->thread_mutex); + + max->word_7bits = 0; + max->parity = 0; + max->baud = 0; + + max->cur_conf = 0; + max->uart_flags = 0; + + /* Check if reading configuration register returns something sane */ + + res = RC_TAG; + ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); + if (ret < 0 || res == 0 || res == 0xffff) { + printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + res); + ret = -ENODEV; + goto err_get_page; + } + + buffer = (void *)__get_free_page(GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err_get_page; + } + max->con_xmit.buf = buffer; + max->con_xmit.head = 0; + max->con_xmit.tail = 0; + + max->main_thread = kthread_run(max3110_main_thread, + max, "max3110_main"); + if (IS_ERR(max->main_thread)) { + ret = PTR_ERR(max->main_thread); + goto err_kthread; + } + + spi_set_drvdata(spi, max); + pmax = max; + + /* Give membase a psudo value to pass serial_core's check */ + max->port.membase = (void *)0xff110000; + uart_add_one_port(&serial_m3110_reg, &max->port); + + return 0; + +err_kthread: + free_page((unsigned long)buffer); +err_get_page: + kfree(max); + return ret; +} + +static int __devexit serial_m3110_remove(struct spi_device *dev) +{ + struct uart_max3110 *max = spi_get_drvdata(dev); + + if (!max) + return 0; + + uart_remove_one_port(&serial_m3110_reg, &max->port); + + free_page((unsigned long)max->con_xmit.buf); + + if (max->main_thread) + kthread_stop(max->main_thread); + + kfree(max); + return 0; +} + +static struct spi_driver uart_max3110_driver = { + .driver = { + .name = "spi_max3111", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = serial_m3110_probe, + .remove = __devexit_p(serial_m3110_remove), + .suspend = serial_m3110_suspend, + .resume = serial_m3110_resume, +}; + +static int __init serial_m3110_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&serial_m3110_reg); + if (ret) + return ret; + + ret = spi_register_driver(&uart_max3110_driver); + if (ret) + uart_unregister_driver(&serial_m3110_reg); + + return ret; +} + +static void __exit serial_m3110_exit(void) +{ + spi_unregister_driver(&uart_max3110_driver); + uart_unregister_driver(&serial_m3110_reg); +} + +module_init(serial_m3110_init); +module_exit(serial_m3110_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("max3110-uart"); diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h new file mode 100644 index 0000000..d1ef43a --- /dev/null +++ b/drivers/tty/serial/mrst_max3110.h @@ -0,0 +1,60 @@ +#ifndef _MRST_MAX3110_H +#define _MRST_MAX3110_H + +#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ +#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ + +/* status bits for all 4 MAX3110 operate modes */ +#define MAX3110_READ_DATA_AVAILABLE (1 << 15) +#define MAX3110_WRITE_BUF_EMPTY (1 << 14) + +#define WC_TAG (3 << 14) +#define RC_TAG (1 << 14) +#define WD_TAG (2 << 14) +#define RD_TAG (0 << 14) + +/* bits def for write configuration */ +#define WC_FIFO_ENABLE_MASK (1 << 13) +#define WC_FIFO_ENABLE (0 << 13) + +#define WC_SW_SHDI (1 << 12) + +#define WC_IRQ_MASK (0xF << 8) +#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ +#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ +#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) +#define WC_REC_ACT_IRQ_ENABLE (1 << 8) + +#define WC_IRDA_ENABLE (1 << 7) + +#define WC_STOPBITS_MASK (1 << 6) +#define WC_2_STOPBITS (1 << 6) +#define WC_1_STOPBITS (0 << 6) + +#define WC_PARITY_ENABLE_MASK (1 << 5) +#define WC_PARITY_ENABLE (1 << 5) + +#define WC_WORDLEN_MASK (1 << 4) +#define WC_7BIT_WORD (1 << 4) +#define WC_8BIT_WORD (0 << 4) + +#define WC_BAUD_DIV_MASK (0xF) +#define WC_BAUD_DR1 (0x0) +#define WC_BAUD_DR2 (0x1) +#define WC_BAUD_DR4 (0x2) +#define WC_BAUD_DR8 (0x3) +#define WC_BAUD_DR16 (0x4) +#define WC_BAUD_DR32 (0x5) +#define WC_BAUD_DR64 (0x6) +#define WC_BAUD_DR128 (0x7) +#define WC_BAUD_DR3 (0x8) +#define WC_BAUD_DR6 (0x9) +#define WC_BAUD_DR12 (0xA) +#define WC_BAUD_DR24 (0xB) +#define WC_BAUD_DR48 (0xC) +#define WC_BAUD_DR96 (0xD) +#define WC_BAUD_DR192 (0xE) +#define WC_BAUD_DR384 (0xF) + +#define M3110_RX_FIFO_DEPTH 8 +#endif diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c new file mode 100644 index 0000000..8e43a7b --- /dev/null +++ b/drivers/tty/serial/msm_serial.c @@ -0,0 +1,758 @@ +/* + * drivers/serial/msm_serial.c - driver for msm7k serial device and console + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +# define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "msm_serial.h" + +struct msm_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + unsigned int imr; +}; + +static void msm_stop_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_start_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_stop_rx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_enable_ms(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_DELTA_CTS; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned int sr; + + /* + * Handle overrun. My understanding of the hardware is that overrun + * is not tied to the RX buffer, so we handle the case out of band. + */ + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + /* and now the main RX loop */ + while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { + unsigned int c; + char flag = TTY_NORMAL; + + c = msm_read(port, UART_RF); + + if (sr & UART_SR_RX_BREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + port->icount.frame++; + } else { + port->icount.rx++; + } + + /* Mask conditions we're ignorning. */ + sr &= port->read_status_mask; + + if (sr & UART_SR_RX_BREAK) { + flag = TTY_BREAK; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + flag = TTY_FRAME; + } + + if (!uart_handle_sysrq_char(port, c)) + tty_insert_flip_char(tty, c, flag); + } + + tty_flip_buffer_push(tty); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct msm_port *msm_port = UART_TO_MSM(port); + int sent_tx; + + if (port->x_char) { + msm_write(port, port->x_char, UART_TF); + port->icount.tx++; + port->x_char = 0; + } + + while (msm_read(port, UART_SR) & UART_SR_TX_READY) { + if (uart_circ_empty(xmit)) { + /* disable tx interrupts */ + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); + break; + } + + msm_write(port, xmit->buf[xmit->tail], UART_TF); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + sent_tx = 1; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void handle_delta_cts(struct uart_port *port) +{ + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t msm_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int misr; + + spin_lock(&port->lock); + misr = msm_read(port, UART_MISR); + msm_write(port, 0, UART_IMR); /* disable interrupt */ + + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) + handle_rx(port); + if (misr & UART_IMR_TXLEV) + handle_tx(port); + if (misr & UART_IMR_DELTA_CTS) + handle_delta_cts(port); + + msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int msm_tx_empty(struct uart_port *port) +{ + return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static unsigned int msm_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; +} + +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int mr; + + mr = msm_read(port, UART_MR1); + + if (!(mctrl & TIOCM_RTS)) { + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + } else { + mr |= UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + } +} + +static void msm_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); + else + msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); +} + +static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + unsigned int baud_code, rxstale, watermark; + + switch (baud) { + case 300: + baud_code = UART_CSR_300; + rxstale = 1; + break; + case 600: + baud_code = UART_CSR_600; + rxstale = 1; + break; + case 1200: + baud_code = UART_CSR_1200; + rxstale = 1; + break; + case 2400: + baud_code = UART_CSR_2400; + rxstale = 1; + break; + case 4800: + baud_code = UART_CSR_4800; + rxstale = 1; + break; + case 9600: + baud_code = UART_CSR_9600; + rxstale = 2; + break; + case 14400: + baud_code = UART_CSR_14400; + rxstale = 3; + break; + case 19200: + baud_code = UART_CSR_19200; + rxstale = 4; + break; + case 28800: + baud_code = UART_CSR_28800; + rxstale = 6; + break; + case 38400: + baud_code = UART_CSR_38400; + rxstale = 8; + break; + case 57600: + baud_code = UART_CSR_57600; + rxstale = 16; + break; + case 115200: + default: + baud_code = UART_CSR_115200; + baud = 115200; + rxstale = 31; + break; + } + + msm_write(port, baud_code, UART_CSR); + + /* RX stale watermark */ + watermark = UART_IPR_STALE_LSB & rxstale; + watermark |= UART_IPR_RXSTALE_LAST; + watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); + msm_write(port, watermark, UART_IPR); + + /* set RX watermark */ + watermark = (port->fifosize * 3) / 4; + msm_write(port, watermark, UART_RFWR); + + /* set TX watermark */ + msm_write(port, 10, UART_TFWR); + + return baud; +} + +static void msm_reset(struct uart_port *port) +{ + /* reset everything */ + msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); +} + +static void msm_init_clock(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + clk_enable(msm_port->clk); + msm_serial_set_mnd_regs(port); +} + +static int msm_startup(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int data, rfr_level; + int ret; + + snprintf(msm_port->name, sizeof(msm_port->name), + "msm_serial%d", port->line); + + ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, + msm_port->name, port); + if (unlikely(ret)) + return ret; + + msm_init_clock(port); + + if (likely(port->fifosize > 12)) + rfr_level = port->fifosize - 12; + else + rfr_level = port->fifosize; + + /* set automatic RFR level */ + data = msm_read(port, UART_MR1); + data &= ~UART_MR1_AUTO_RFR_LEVEL1; + data &= ~UART_MR1_AUTO_RFR_LEVEL0; + data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); + data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; + msm_write(port, data, UART_MR1); + + /* make sure that RXSTALE count is non-zero */ + data = msm_read(port, UART_IPR); + if (unlikely(!data)) { + data |= UART_IPR_RXSTALE_LAST; + data |= UART_IPR_STALE_LSB; + msm_write(port, data, UART_IPR); + } + + msm_reset(port); + + msm_write(port, 0x05, UART_CR); /* enable TX & RX */ + + /* turn on RX and CTS interrupts */ + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | + UART_IMR_CURRENT_CTS; + msm_write(port, msm_port->imr, UART_IMR); + + return 0; +} + +static void msm_shutdown(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr = 0; + msm_write(port, 0, UART_IMR); /* disable interrupts */ + + clk_disable(msm_port->clk); + + free_irq(port->irq, port); +} + +static void msm_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, mr; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 300, 115200); + baud = msm_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + mr = msm_read(port, UART_MR2); + mr &= ~UART_MR2_PARITY_MODE; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr |= UART_MR2_PARITY_MODE_ODD; + else if (termios->c_cflag & CMSPAR) + mr |= UART_MR2_PARITY_MODE_SPACE; + else + mr |= UART_MR2_PARITY_MODE_EVEN; + } + + /* calculate bits per char */ + mr &= ~UART_MR2_BITS_PER_CHAR; + switch (termios->c_cflag & CSIZE) { + case CS5: + mr |= UART_MR2_BITS_PER_CHAR_5; + break; + case CS6: + mr |= UART_MR2_BITS_PER_CHAR_6; + break; + case CS7: + mr |= UART_MR2_BITS_PER_CHAR_7; + break; + case CS8: + default: + mr |= UART_MR2_BITS_PER_CHAR_8; + break; + } + + /* calculate stop bits */ + mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); + if (termios->c_cflag & CSTOPB) + mr |= UART_MR2_STOP_BIT_LEN_TWO; + else + mr |= UART_MR2_STOP_BIT_LEN_ONE; + + /* set parity, bits per char, and stop bit */ + msm_write(port, mr, UART_MR2); + + /* calculate and set hardware flow control */ + mr = msm_read(port, UART_MR1); + mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); + if (termios->c_cflag & CRTSCTS) { + mr |= UART_MR1_CTS_CTL; + mr |= UART_MR1_RX_RDY_CTL; + } + msm_write(port, mr, UART_MR1); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_SR_PAR_FRAME_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_SR_RX_BREAK; + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *msm_type(struct uart_port *port) +{ + return "MSM"; +} + +static void msm_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *resource; + resource_size_t size; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return; + size = resource->end - resource->start + 1; + + release_mem_region(port->mapbase, size); + iounmap(port->membase); + port->membase = NULL; +} + +static int msm_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *resource; + resource_size_t size; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + size = resource->end - resource->start + 1; + + if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial"))) + return -EBUSY; + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); + return -EBUSY; + } + + return 0; +} + +static void msm_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MSM; + msm_request_port(port); + } +} + +static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static void msm_power(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + switch (state) { + case 0: + clk_enable(msm_port->clk); + break; + case 3: + clk_disable(msm_port->clk); + break; + default: + printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); + } +} + +static struct uart_ops msm_uart_pops = { + .tx_empty = msm_tx_empty, + .set_mctrl = msm_set_mctrl, + .get_mctrl = msm_get_mctrl, + .stop_tx = msm_stop_tx, + .start_tx = msm_start_tx, + .stop_rx = msm_stop_rx, + .enable_ms = msm_enable_ms, + .break_ctl = msm_break_ctl, + .startup = msm_startup, + .shutdown = msm_shutdown, + .set_termios = msm_set_termios, + .type = msm_type, + .release_port = msm_release_port, + .request_port = msm_request_port, + .config_port = msm_config_port, + .verify_port = msm_verify_port, + .pm = msm_power, +}; + +static struct msm_port msm_uart_ports[] = { + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 512, + .line = 0, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 512, + .line = 1, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 2, + }, + }, +}; + +#define UART_NR ARRAY_SIZE(msm_uart_ports) + +static inline struct uart_port *get_port_from_line(unsigned int line) +{ + return &msm_uart_ports[line].uart; +} + +#ifdef CONFIG_SERIAL_MSM_CONSOLE + +static void msm_console_putchar(struct uart_port *port, int c) +{ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + ; + msm_write(port, c, UART_TF); +} + +static void msm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + struct msm_port *msm_port; + + BUG_ON(co->index < 0 || co->index >= UART_NR); + + port = get_port_from_line(co->index); + msm_port = UART_TO_MSM(port); + + spin_lock(&port->lock); + uart_console_write(port, s, count, msm_console_putchar); + spin_unlock(&port->lock); +} + +static int __init msm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud, flow, bits, parity; + + if (unlikely(co->index >= UART_NR || co->index < 0)) + return -ENXIO; + + port = get_port_from_line(co->index); + + if (unlikely(!port->membase)) + return -ENXIO; + + port->cons = co; + + msm_init_clock(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + bits = 8; + parity = 'n'; + flow = 'n'; + msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, + UART_MR2); /* 8N1 */ + + if (baud < 300 || baud > 115200) + baud = 115200; + msm_set_baud_rate(port, baud); + + msm_reset(port); + + printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver msm_uart_driver; + +static struct console msm_console = { + .name = "ttyMSM", + .write = msm_console_write, + .device = uart_console_device, + .setup = msm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &msm_uart_driver, +}; + +#define MSM_CONSOLE (&msm_console) + +#else +#define MSM_CONSOLE NULL +#endif + +static struct uart_driver msm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial", + .dev_name = "ttyMSM", + .nr = UART_NR, + .cons = MSM_CONSOLE, +}; + +static int __init msm_serial_probe(struct platform_device *pdev) +{ + struct msm_port *msm_port; + struct resource *resource; + struct uart_port *port; + int irq; + + if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) + return -ENXIO; + + printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); + + port = get_port_from_line(pdev->id); + port->dev = &pdev->dev; + msm_port = UART_TO_MSM(port); + + msm_port->clk = clk_get(&pdev->dev, "uart_clk"); + if (IS_ERR(msm_port->clk)) + return PTR_ERR(msm_port->clk); + port->uartclk = clk_get_rate(msm_port->clk); + printk(KERN_INFO "uartclk = %d\n", port->uartclk); + + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + port->mapbase = resource->start; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) + return -ENXIO; + port->irq = irq; + + platform_set_drvdata(pdev, port); + + return uart_add_one_port(&msm_uart_driver, port); +} + +static int __devexit msm_serial_remove(struct platform_device *pdev) +{ + struct msm_port *msm_port = platform_get_drvdata(pdev); + + clk_put(msm_port->clk); + + return 0; +} + +static struct platform_driver msm_platform_driver = { + .remove = msm_serial_remove, + .driver = { + .name = "msm_serial", + .owner = THIS_MODULE, + }, +}; + +static int __init msm_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&msm_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); + if (unlikely(ret)) + uart_unregister_driver(&msm_uart_driver); + + printk(KERN_INFO "msm_serial: driver initialized\n"); + + return ret; +} + +static void __exit msm_serial_exit(void) +{ +#ifdef CONFIG_SERIAL_MSM_CONSOLE + unregister_console(&msm_console); +#endif + platform_driver_unregister(&msm_platform_driver); + uart_unregister_driver(&msm_uart_driver); +} + +module_init(msm_serial_init); +module_exit(msm_serial_exit); + +MODULE_AUTHOR("Robert Love "); +MODULE_DESCRIPTION("Driver for msm7x serial device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h new file mode 100644 index 0000000..f6ca9ca --- /dev/null +++ b/drivers/tty/serial/msm_serial.h @@ -0,0 +1,173 @@ +/* + * drivers/serial/msm_serial.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H +#define __DRIVERS_SERIAL_MSM_SERIAL_H + +#define UART_MR1 0x0000 + +#define UART_MR1_AUTO_RFR_LEVEL0 0x3F +#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 +#define UART_MR1_RX_RDY_CTL (1 << 7) +#define UART_MR1_CTS_CTL (1 << 6) + +#define UART_MR2 0x0004 +#define UART_MR2_ERROR_MODE (1 << 6) +#define UART_MR2_BITS_PER_CHAR 0x30 +#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) +#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) +#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) +#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) +#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) +#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) +#define UART_MR2_PARITY_MODE_NONE 0x0 +#define UART_MR2_PARITY_MODE_ODD 0x1 +#define UART_MR2_PARITY_MODE_EVEN 0x2 +#define UART_MR2_PARITY_MODE_SPACE 0x3 +#define UART_MR2_PARITY_MODE 0x3 + +#define UART_CSR 0x0008 +#define UART_CSR_115200 0xFF +#define UART_CSR_57600 0xEE +#define UART_CSR_38400 0xDD +#define UART_CSR_28800 0xCC +#define UART_CSR_19200 0xBB +#define UART_CSR_14400 0xAA +#define UART_CSR_9600 0x99 +#define UART_CSR_4800 0x77 +#define UART_CSR_2400 0x55 +#define UART_CSR_1200 0x44 +#define UART_CSR_600 0x33 +#define UART_CSR_300 0x22 + +#define UART_TF 0x000C + +#define UART_CR 0x0010 +#define UART_CR_CMD_NULL (0 << 4) +#define UART_CR_CMD_RESET_RX (1 << 4) +#define UART_CR_CMD_RESET_TX (2 << 4) +#define UART_CR_CMD_RESET_ERR (3 << 4) +#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) +#define UART_CR_CMD_START_BREAK (5 << 4) +#define UART_CR_CMD_STOP_BREAK (6 << 4) +#define UART_CR_CMD_RESET_CTS (7 << 4) +#define UART_CR_CMD_PACKET_MODE (9 << 4) +#define UART_CR_CMD_MODE_RESET (12 << 4) +#define UART_CR_CMD_SET_RFR (13 << 4) +#define UART_CR_CMD_RESET_RFR (14 << 4) +#define UART_CR_TX_DISABLE (1 << 3) +#define UART_CR_TX_ENABLE (1 << 3) +#define UART_CR_RX_DISABLE (1 << 3) +#define UART_CR_RX_ENABLE (1 << 3) + +#define UART_IMR 0x0014 +#define UART_IMR_TXLEV (1 << 0) +#define UART_IMR_RXSTALE (1 << 3) +#define UART_IMR_RXLEV (1 << 4) +#define UART_IMR_DELTA_CTS (1 << 5) +#define UART_IMR_CURRENT_CTS (1 << 6) + +#define UART_IPR_RXSTALE_LAST 0x20 +#define UART_IPR_STALE_LSB 0x1F +#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 + +#define UART_IPR 0x0018 +#define UART_TFWR 0x001C +#define UART_RFWR 0x0020 +#define UART_HCR 0x0024 + +#define UART_MREG 0x0028 +#define UART_NREG 0x002C +#define UART_DREG 0x0030 +#define UART_MNDREG 0x0034 +#define UART_IRDA 0x0038 +#define UART_MISR_MODE 0x0040 +#define UART_MISR_RESET 0x0044 +#define UART_MISR_EXPORT 0x0048 +#define UART_MISR_VAL 0x004C +#define UART_TEST_CTRL 0x0050 + +#define UART_SR 0x0008 +#define UART_SR_HUNT_CHAR (1 << 7) +#define UART_SR_RX_BREAK (1 << 6) +#define UART_SR_PAR_FRAME_ERR (1 << 5) +#define UART_SR_OVERRUN (1 << 4) +#define UART_SR_TX_EMPTY (1 << 3) +#define UART_SR_TX_READY (1 << 2) +#define UART_SR_RX_FULL (1 << 1) +#define UART_SR_RX_READY (1 << 0) + +#define UART_RF 0x000C +#define UART_MISR 0x0010 +#define UART_ISR 0x0014 + +#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port) + +static inline +void msm_write(struct uart_port *port, unsigned int val, unsigned int off) +{ + __raw_writel(val, port->membase + off); +} + +static inline +unsigned int msm_read(struct uart_port *port, unsigned int off) +{ + return __raw_readl(port->membase + off); +} + +/* + * Setup the MND registers to use the TCXO clock. + */ +static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) +{ + msm_write(port, 0x06, UART_MREG); + msm_write(port, 0xF1, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x1A, UART_MNDREG); +} + +/* + * Setup the MND registers to use the TCXO clock divided by 4. + */ +static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) +{ + msm_write(port, 0x18, UART_MREG); + msm_write(port, 0xF6, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x0A, UART_MNDREG); +} + +static inline +void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) +{ + if (port->uartclk == 19200000) + msm_serial_set_mnd_regs_tcxo(port); + else + msm_serial_set_mnd_regs_tcxoby4(port); +} + +/* + * TROUT has a specific defect that makes it report it's uartclk + * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special + * cases TROUT to use the right clock. + */ +#ifdef CONFIG_MACH_TROUT +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4 +#else +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk +#endif + +#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c new file mode 100644 index 0000000..9711e06 --- /dev/null +++ b/drivers/tty/serial/mux.c @@ -0,0 +1,633 @@ +/* +** mux.c: +** serial driver for the Mux console found in some PA-RISC servers. +** +** (c) Copyright 2002 Ryan Bradetich +** (c) Copyright 2002 Hewlett-Packard Company +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** This Driver currently only supports the console (port 0) on the MUX. +** Additional work will be needed on this driver to enable the full +** functionality of the MUX. +** +*/ + +#include +#include +#include +#include +#include +#include +#include /* for udelay */ +#include +#include +#include +#include + +#ifdef CONFIG_MAGIC_SYSRQ +#include +#define SUPPORT_SYSRQ +#endif + +#include + +#define MUX_OFFSET 0x800 +#define MUX_LINE_OFFSET 0x80 + +#define MUX_FIFO_SIZE 255 +#define MUX_POLL_DELAY (30 * HZ / 1000) + +#define IO_DATA_REG_OFFSET 0x3c +#define IO_DCOUNT_REG_OFFSET 0x40 + +#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) +#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) +#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) + +#define MUX_NR 256 +static unsigned int port_cnt __read_mostly; +struct mux_port { + struct uart_port port; + int enabled; +}; +static struct mux_port mux_ports[MUX_NR]; + +static struct uart_driver mux_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyB", + .dev_name = "ttyB", + .major = MUX_MAJOR, + .minor = 0, + .nr = MUX_NR, +}; + +static struct timer_list mux_timer; + +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) +#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) + +/** + * get_mux_port_count - Get the number of available ports on the Mux. + * @dev: The parisc device. + * + * This function is used to determine the number of ports the Mux + * supports. The IODC data reports the number of ports the Mux + * can support, but there are cases where not all the Mux ports + * are connected. This function can override the IODC and + * return the true port count. + */ +static int __init get_mux_port_count(struct parisc_device *dev) +{ + int status; + u8 iodc_data[32]; + unsigned long bytecnt; + + /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), + * we only need to allocate resources for 1 port since the + * other 7 ports are not connected. + */ + if(dev->id.hversion == 0x15) + return 1; + + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); + BUG_ON(status != PDC_OK); + + /* Return the number of ports specified in the iodc data. */ + return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; +} + +/** + * mux_tx_empty - Check if the transmitter fifo is empty. + * @port: Ptr to the uart_port. + * + * This function test if the transmitter fifo for the port + * described by 'port' is empty. If it is empty, this function + * should return TIOCSER_TEMT, otherwise return 0. + */ +static unsigned int mux_tx_empty(struct uart_port *port) +{ + return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; +} + +/** + * mux_set_mctrl - Set the current state of the modem control inputs. + * @ports: Ptr to the uart_port. + * @mctrl: Modem control bits. + * + * The Serial MUX does not support CTS, DCD or DSR so this function + * is ignored. + */ +static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * mux_get_mctrl - Returns the current state of modem control inputs. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support CTS, DCD or DSR so these lines are + * treated as permanently active. + */ +static unsigned int mux_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/** + * mux_stop_tx - Stop transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support this function. + */ +static void mux_stop_tx(struct uart_port *port) +{ +} + +/** + * mux_start_tx - Start transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_start_tx(struct uart_port *port) +{ +} + +/** + * mux_stop_rx - Stop receiving characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_stop_rx(struct uart_port *port) +{ +} + +/** + * mux_enable_ms - Enable modum status interrupts. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_enable_ms(struct uart_port *port) +{ +} + +/** + * mux_break_ctl - Control the transmitssion of a break signal. + * @port: Ptr to the uart_port. + * @break_state: Raise/Lower the break signal. + * + * The Serial Mux does not support this function. + */ +static void mux_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * mux_write - Write chars to the mux fifo. + * @port: Ptr to the uart_port. + * + * This function writes all the data from the uart buffer to + * the mux fifo. + */ +static void mux_write(struct uart_port *port) +{ + int count; + struct circ_buf *xmit = &port->state->xmit; + + if(port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mux_stop_tx(port); + return; + } + + count = (port->fifosize) - UART_GET_FIFO_CNT(port); + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if(uart_circ_empty(xmit)) + break; + + } while(--count > 0); + + while(UART_GET_FIFO_CNT(port)) + udelay(1); + + if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mux_stop_tx(port); +} + +/** + * mux_read - Read chars from the mux fifo. + * @port: Ptr to the uart_port. + * + * This reads all available data from the mux's fifo and pushes + * the data to the tty layer. + */ +static void mux_read(struct uart_port *port) +{ + int data; + struct tty_struct *tty = port->state->port.tty; + __u32 start_count = port->icount.rx; + + while(1) { + data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); + + if (MUX_STATUS(data)) + continue; + + if (MUX_EOFIFO(data)) + break; + + port->icount.rx++; + + if (MUX_BREAK(data)) { + port->icount.brk++; + if(uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, data & 0xffu)) + continue; + + tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); + } + + if (start_count != port->icount.rx) { + tty_flip_buffer_push(tty); + } +} + +/** + * mux_startup - Initialize the port. + * @port: Ptr to the uart_port. + * + * Grab any resources needed for this port and start the + * mux timer. + */ +static int mux_startup(struct uart_port *port) +{ + mux_ports[port->line].enabled = 1; + return 0; +} + +/** + * mux_shutdown - Disable the port. + * @port: Ptr to the uart_port. + * + * Release any resources needed for the port. + */ +static void mux_shutdown(struct uart_port *port) +{ + mux_ports[port->line].enabled = 0; +} + +/** + * mux_set_termios - Chane port parameters. + * @port: Ptr to the uart_port. + * @termios: new termios settings. + * @old: old termios settings. + * + * The Serial Mux does not support this function. + */ +static void +mux_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +} + +/** + * mux_type - Describe the port. + * @port: Ptr to the uart_port. + * + * Return a pointer to a string constant describing the + * specified port. + */ +static const char *mux_type(struct uart_port *port) +{ + return "Mux"; +} + +/** + * mux_release_port - Release memory and IO regions. + * @port: Ptr to the uart_port. + * + * Release any memory and IO region resources currently in use by + * the port. + */ +static void mux_release_port(struct uart_port *port) +{ +} + +/** + * mux_request_port - Request memory and IO regions. + * @port: Ptr to the uart_port. + * + * Request any memory and IO region resources required by the port. + * If any fail, no resources should be registered when this function + * returns, and it should return -EBUSY on failure. + */ +static int mux_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * mux_config_port - Perform port autoconfiguration. + * @port: Ptr to the uart_port. + * @type: Bitmask of required configurations. + * + * Perform any autoconfiguration steps for the port. This function is + * called if the UPF_BOOT_AUTOCONF flag is specified for the port. + * [Note: This is required for now because of a bug in the Serial core. + * rmk has already submitted a patch to linus, should be available for + * 2.5.47.] + */ +static void mux_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MUX; +} + +/** + * mux_verify_port - Verify the port information. + * @port: Ptr to the uart_port. + * @ser: Ptr to the serial information. + * + * Verify the new serial port information contained within serinfo is + * suitable for this port type. + */ +static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if(port->membase == NULL) + return -EINVAL; + + return 0; +} + +/** + * mux_drv_poll - Mux poll function. + * @unused: Unused variable + * + * This function periodically polls the Serial MUX to check for new data. + */ +static void mux_poll(unsigned long unused) +{ + int i; + + for(i = 0; i < port_cnt; ++i) { + if(!mux_ports[i].enabled) + continue; + + mux_read(&mux_ports[i].port); + mux_write(&mux_ports[i].port); + } + + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); +} + + +#ifdef CONFIG_SERIAL_MUX_CONSOLE +static void mux_console_write(struct console *co, const char *s, unsigned count) +{ + /* Wait until the FIFO drains. */ + while(UART_GET_FIFO_CNT(&mux_ports[0].port)) + udelay(1); + + while(count--) { + if(*s == '\n') { + UART_PUT_CHAR(&mux_ports[0].port, '\r'); + } + UART_PUT_CHAR(&mux_ports[0].port, *s++); + } + +} + +static int mux_console_setup(struct console *co, char *options) +{ + return 0; +} + +struct tty_driver *mux_console_device(struct console *co, int *index) +{ + *index = co->index; + return mux_driver.tty_driver; +} + +static struct console mux_console = { + .name = "ttyB", + .write = mux_console_write, + .device = mux_console_device, + .setup = mux_console_setup, + .flags = CON_ENABLED | CON_PRINTBUFFER, + .index = 0, +}; + +#define MUX_CONSOLE &mux_console +#else +#define MUX_CONSOLE NULL +#endif + +static struct uart_ops mux_pops = { + .tx_empty = mux_tx_empty, + .set_mctrl = mux_set_mctrl, + .get_mctrl = mux_get_mctrl, + .stop_tx = mux_stop_tx, + .start_tx = mux_start_tx, + .stop_rx = mux_stop_rx, + .enable_ms = mux_enable_ms, + .break_ctl = mux_break_ctl, + .startup = mux_startup, + .shutdown = mux_shutdown, + .set_termios = mux_set_termios, + .type = mux_type, + .release_port = mux_release_port, + .request_port = mux_request_port, + .config_port = mux_config_port, + .verify_port = mux_verify_port, +}; + +/** + * mux_probe - Determine if the Serial Mux should claim this device. + * @dev: The parisc device. + * + * Deterimine if the Serial Mux should claim this chip (return 0) + * or not (return 1). + */ +static int __init mux_probe(struct parisc_device *dev) +{ + int i, status; + + int port_count = get_mux_port_count(dev); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); + + dev_set_drvdata(&dev->dev, (void *)(long)port_count); + request_mem_region(dev->hpa.start + MUX_OFFSET, + port_count * MUX_LINE_OFFSET, "Mux"); + + if(!port_cnt) { + mux_driver.cons = MUX_CONSOLE; + + status = uart_register_driver(&mux_driver); + if(status) { + printk(KERN_ERR "Serial mux: Unable to register driver.\n"); + return 1; + } + } + + for(i = 0; i < port_count; ++i, ++port_cnt) { + struct uart_port *port = &mux_ports[port_cnt].port; + port->iobase = 0; + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); + port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET); + port->iotype = UPIO_MEM; + port->type = PORT_MUX; + port->irq = NO_IRQ; + port->uartclk = 0; + port->fifosize = MUX_FIFO_SIZE; + port->ops = &mux_pops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = port_cnt; + + /* The port->timeout needs to match what is present in + * uart_wait_until_sent in serial_core.c. Otherwise + * the time spent in msleep_interruptable will be very + * long, causing the appearance of a console hang. + */ + port->timeout = HZ / 50; + spin_lock_init(&port->lock); + + status = uart_add_one_port(&mux_driver, port); + BUG_ON(status); + } + + return 0; +} + +static int __devexit mux_remove(struct parisc_device *dev) +{ + int i, j; + int port_count = (long)dev_get_drvdata(&dev->dev); + + /* Find Port 0 for this card in the mux_ports list. */ + for(i = 0; i < port_cnt; ++i) { + if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) + break; + } + BUG_ON(i + port_count > port_cnt); + + /* Release the resources associated with each port on the device. */ + for(j = 0; j < port_count; ++j, ++i) { + struct uart_port *port = &mux_ports[i].port; + + uart_remove_one_port(&mux_driver, port); + if(port->membase) + iounmap(port->membase); + } + + release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); + return 0; +} + +/* Hack. This idea was taken from the 8250_gsc.c on how to properly order + * the serial port detection in the proper order. The idea is we always + * want the builtin mux to be detected before addin mux cards, so we + * specifically probe for the builtin mux cards first. + * + * This table only contains the parisc_device_id of known builtin mux + * devices. All other mux cards will be detected by the generic mux_tbl. + */ +static struct parisc_device_id builtin_mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ + { 0, } +}; + +static struct parisc_device_id mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); +MODULE_DEVICE_TABLE(parisc, mux_tbl); + +static struct parisc_driver builtin_serial_mux_driver = { + .name = "builtin_serial_mux", + .id_table = builtin_mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + +static struct parisc_driver serial_mux_driver = { + .name = "serial_mux", + .id_table = mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + +/** + * mux_init - Serial MUX initialization procedure. + * + * Register the Serial MUX driver. + */ +static int __init mux_init(void) +{ + register_parisc_driver(&builtin_serial_mux_driver); + register_parisc_driver(&serial_mux_driver); + + if(port_cnt > 0) { + /* Start the Mux timer */ + init_timer(&mux_timer); + mux_timer.function = mux_poll; + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + +#ifdef CONFIG_SERIAL_MUX_CONSOLE + register_console(&mux_console); +#endif + } + + return 0; +} + +/** + * mux_exit - Serial MUX cleanup procedure. + * + * Unregister the Serial MUX driver from the tty layer. + */ +static void __exit mux_exit(void) +{ + /* Delete the Mux timer. */ + if(port_cnt > 0) { + del_timer(&mux_timer); +#ifdef CONFIG_SERIAL_MUX_CONSOLE + unregister_console(&mux_console); +#endif + } + + unregister_parisc_driver(&builtin_serial_mux_driver); + unregister_parisc_driver(&serial_mux_driver); + uart_unregister_driver(&mux_driver); +} + +module_init(mux_init); +module_exit(mux_exit); + +MODULE_AUTHOR("Ryan Bradetich"); +MODULE_DESCRIPTION("Serial MUX driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c new file mode 100644 index 0000000..7735c9f --- /dev/null +++ b/drivers/tty/serial/netx-serial.c @@ -0,0 +1,750 @@ +/* + * drivers/serial/netx-serial.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_NX_MAJOR 204 +#define MINOR_START 170 + +enum uart_regs { + UART_DR = 0x00, + UART_SR = 0x04, + UART_LINE_CR = 0x08, + UART_BAUDDIV_MSB = 0x0c, + UART_BAUDDIV_LSB = 0x10, + UART_CR = 0x14, + UART_FR = 0x18, + UART_IIR = 0x1c, + UART_ILPR = 0x20, + UART_RTS_CR = 0x24, + UART_RTS_LEAD = 0x28, + UART_RTS_TRAIL = 0x2c, + UART_DRV_ENABLE = 0x30, + UART_BRM_CR = 0x34, + UART_RXFIFO_IRQLEVEL = 0x38, + UART_TXFIFO_IRQLEVEL = 0x3c, +}; + +#define SR_FE (1<<0) +#define SR_PE (1<<1) +#define SR_BE (1<<2) +#define SR_OE (1<<3) + +#define LINE_CR_BRK (1<<0) +#define LINE_CR_PEN (1<<1) +#define LINE_CR_EPS (1<<2) +#define LINE_CR_STP2 (1<<3) +#define LINE_CR_FEN (1<<4) +#define LINE_CR_5BIT (0<<5) +#define LINE_CR_6BIT (1<<5) +#define LINE_CR_7BIT (2<<5) +#define LINE_CR_8BIT (3<<5) +#define LINE_CR_BITS_MASK (3<<5) + +#define CR_UART_EN (1<<0) +#define CR_SIREN (1<<1) +#define CR_SIRLP (1<<2) +#define CR_MSIE (1<<3) +#define CR_RIE (1<<4) +#define CR_TIE (1<<5) +#define CR_RTIE (1<<6) +#define CR_LBE (1<<7) + +#define FR_CTS (1<<0) +#define FR_DSR (1<<1) +#define FR_DCD (1<<2) +#define FR_BUSY (1<<3) +#define FR_RXFE (1<<4) +#define FR_TXFF (1<<5) +#define FR_RXFF (1<<6) +#define FR_TXFE (1<<7) + +#define IIR_MIS (1<<0) +#define IIR_RIS (1<<1) +#define IIR_TIS (1<<2) +#define IIR_RTIS (1<<3) +#define IIR_MASK 0xf + +#define RTS_CR_AUTO (1<<0) +#define RTS_CR_RTS (1<<1) +#define RTS_CR_COUNT (1<<2) +#define RTS_CR_MOD2 (1<<3) +#define RTS_CR_RTS_POL (1<<4) +#define RTS_CR_CTS_CTR (1<<5) +#define RTS_CR_CTS_POL (1<<6) +#define RTS_CR_STICK (1<<7) + +#define UART_PORT_SIZE 0x40 +#define DRIVER_NAME "netx-uart" + +struct netx_port { + struct uart_port port; +}; + +static void netx_stop_tx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_TIE, port->membase + UART_CR); +} + +static void netx_stop_rx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_RIE, port->membase + UART_CR); +} + +static void netx_enable_ms(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val | CR_MSIE, port->membase + UART_CR); +} + +static inline void netx_transmit_buffer(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writel(port->x_char, port->membase + UART_DR); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { + netx_stop_tx(port); + return; + } + + do { + /* send xmit->buf[xmit->tail] + * out the port here */ + writel(xmit->buf[xmit->tail], port->membase + UART_DR); + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (!(readl(port->membase + UART_FR) & FR_TXFF)); + + if (uart_circ_empty(xmit)) + netx_stop_tx(port); +} + +static void netx_start_tx(struct uart_port *port) +{ + writel( + readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); + + if (!(readl(port->membase + UART_FR) & FR_TXFF)) + netx_transmit_buffer(port); +} + +static unsigned int netx_tx_empty(struct uart_port *port) +{ + return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static void netx_txint(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + netx_stop_tx(port); + return; + } + + netx_transmit_buffer(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void netx_rxint(struct uart_port *port) +{ + unsigned char rx, flg, status; + struct tty_struct *tty = port->state->port.tty; + + while (!(readl(port->membase + UART_FR) & FR_RXFE)) { + rx = readl(port->membase + UART_DR); + flg = TTY_NORMAL; + port->icount.rx++; + status = readl(port->membase + UART_SR); + if (status & SR_BE) { + writel(0, port->membase + UART_SR); + if (uart_handle_break(port)) + continue; + } + + if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { + + if (status & SR_PE) + port->icount.parity++; + else if (status & SR_FE) + port->icount.frame++; + if (status & SR_OE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & SR_BE) + flg = TTY_BREAK; + else if (status & SR_PE) + flg = TTY_PARITY; + else if (status & SR_FE) + flg = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, rx)) + continue; + + uart_insert_char(port, status, SR_OE, rx, flg); + } + + tty_flip_buffer_push(tty); + return; +} + +static irqreturn_t netx_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&port->lock,flags); + + status = readl(port->membase + UART_IIR) & IIR_MASK; + while (status) { + if (status & IIR_RIS) + netx_rxint(port); + if (status & IIR_TIS) + netx_txint(port); + if (status & IIR_MIS) { + if (readl(port->membase + UART_FR) & FR_CTS) + uart_handle_cts_change(port, 1); + else + uart_handle_cts_change(port, 0); + } + writel(0, port->membase + UART_IIR); + status = readl(port->membase + UART_IIR) & IIR_MASK; + } + + spin_unlock_irqrestore(&port->lock,flags); + return IRQ_HANDLED; +} + +static unsigned int netx_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR | TIOCM_CAR; + + if (readl(port->membase + UART_FR) & FR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + /* FIXME: Locking needed ? */ + if (mctrl & TIOCM_RTS) { + val = readl(port->membase + UART_RTS_CR); + writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); + } +} + +static void netx_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int line_cr; + spin_lock_irq(&port->lock); + + line_cr = readl(port->membase + UART_LINE_CR); + if (break_state != 0) + line_cr |= LINE_CR_BRK; + else + line_cr &= ~LINE_CR_BRK; + writel(line_cr, port->membase + UART_LINE_CR); + + spin_unlock_irq(&port->lock); +} + +static int netx_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, netx_int, 0, + DRIVER_NAME, port); + if (ret) { + dev_err(port->dev, "unable to grab irq%d\n",port->irq); + goto exit; + } + + writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, + port->membase + UART_LINE_CR); + + writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, + port->membase + UART_CR); + +exit: + return ret; +} + +static void netx_shutdown(struct uart_port *port) +{ + writel(0, port->membase + UART_CR) ; + + free_irq(port->irq, port); +} + +static void +netx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + unsigned char old_cr; + unsigned char line_cr = LINE_CR_FEN; + unsigned char rts_cr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: + line_cr |= LINE_CR_5BIT; + break; + case CS6: + line_cr |= LINE_CR_6BIT; + break; + case CS7: + line_cr |= LINE_CR_7BIT; + break; + case CS8: + line_cr |= LINE_CR_8BIT; + break; + } + + if (termios->c_cflag & CSTOPB) + line_cr |= LINE_CR_STP2; + + if (termios->c_cflag & PARENB) { + line_cr |= LINE_CR_PEN; + if (!(termios->c_cflag & PARODD)) + line_cr |= LINE_CR_EPS; + } + + if (termios->c_cflag & CRTSCTS) + rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = baud * 4096; + quot /= 1000; + quot *= 256; + quot /= 100000; + + spin_lock_irq(&port->lock); + + uart_update_timeout(port, termios->c_cflag, baud); + + old_cr = readl(port->membase + UART_CR); + + /* disable interrupts */ + writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), + port->membase + UART_CR); + + /* drain transmitter */ + while (readl(port->membase + UART_FR) & FR_BUSY); + + /* disable UART */ + writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); + + /* modem status interrupts */ + old_cr &= ~CR_MSIE; + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= CR_MSIE; + + writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); + writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); + writel(line_cr, port->membase + UART_LINE_CR); + + writel(rts_cr, port->membase + UART_RTS_CR); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + } + + port->read_status_mask = 0; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SR_PE | SR_FE; + + writel(old_cr, port->membase + UART_CR); + + spin_unlock_irq(&port->lock); +} + +static const char *netx_type(struct uart_port *port) +{ + return port->type == PORT_NETX ? "NETX" : NULL; +} + +static void netx_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +static int netx_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, + DRIVER_NAME) != NULL ? 0 : -EBUSY; +} + +static void netx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) + port->type = PORT_NETX; +} + +static int +netx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) + ret = -EINVAL; + + return ret; +} + +static struct uart_ops netx_pops = { + .tx_empty = netx_tx_empty, + .set_mctrl = netx_set_mctrl, + .get_mctrl = netx_get_mctrl, + .stop_tx = netx_stop_tx, + .start_tx = netx_start_tx, + .stop_rx = netx_stop_rx, + .enable_ms = netx_enable_ms, + .break_ctl = netx_break_ctl, + .startup = netx_startup, + .shutdown = netx_shutdown, + .set_termios = netx_set_termios, + .type = netx_type, + .release_port = netx_release_port, + .request_port = netx_request_port, + .config_port = netx_config_port, + .verify_port = netx_verify_port, +}; + +static struct netx_port netx_ports[] = { + { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART0), + .mapbase = NETX_PA_UART0, + .irq = NETX_IRQ_UART0, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 0, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART1), + .mapbase = NETX_PA_UART1, + .irq = NETX_IRQ_UART1, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 1, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART2), + .mapbase = NETX_PA_UART2, + .irq = NETX_IRQ_UART2, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 2, + }, + } +}; + +#ifdef CONFIG_SERIAL_NETX_CONSOLE + +static void netx_console_putchar(struct uart_port *port, int ch) +{ + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(ch, port->membase + UART_DR); +} + +static void +netx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &netx_ports[co->index].port; + unsigned char cr_save; + + cr_save = readl(port->membase + UART_CR); + writel(cr_save | CR_UART_EN, port->membase + UART_CR); + + uart_console_write(port, s, count, netx_console_putchar); + + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(cr_save, port->membase + UART_CR); +} + +static void __init +netx_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits, int *flow) +{ + unsigned char line_cr; + + *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | + readl(port->membase + UART_BAUDDIV_LSB); + *baud *= 1000; + *baud /= 4096; + *baud *= 1000; + *baud /= 256; + *baud *= 100; + + line_cr = readl(port->membase + UART_LINE_CR); + *parity = 'n'; + if (line_cr & LINE_CR_PEN) { + if (line_cr & LINE_CR_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + switch (line_cr & LINE_CR_BITS_MASK) { + case LINE_CR_8BIT: + *bits = 8; + break; + case LINE_CR_7BIT: + *bits = 7; + break; + case LINE_CR_6BIT: + *bits = 6; + break; + case LINE_CR_5BIT: + *bits = 5; + break; + } + + if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) + *flow = 'r'; +} + +static int __init +netx_console_setup(struct console *co, char *options) +{ + struct netx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) + co->index = 0; + sport = &netx_ports[co->index]; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + /* if the UART is enabled, assume it has been correctly setup + * by the bootloader and get the options + */ + if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { + netx_console_get_options(&sport->port, &baud, + &parity, &bits, &flow); + } + + } + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver netx_reg; +static struct console netx_console = { + .name = "ttyNX", + .write = netx_console_write, + .device = uart_console_device, + .setup = netx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &netx_reg, +}; + +static int __init netx_console_init(void) +{ + register_console(&netx_console); + return 0; +} +console_initcall(netx_console_init); + +#define NETX_CONSOLE &netx_console +#else +#define NETX_CONSOLE NULL +#endif + +static struct uart_driver netx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyNX", + .major = SERIAL_NX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(netx_ports), + .cons = NETX_CONSOLE, +}; + +static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_suspend_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_resume(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_resume_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_probe(struct platform_device *pdev) +{ + struct uart_port *port = &netx_ports[pdev->id].port; + + dev_info(&pdev->dev, "initialising\n"); + + port->dev = &pdev->dev; + + writel(1, port->membase + UART_RXFIFO_IRQLEVEL); + uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); + platform_set_drvdata(pdev, &netx_ports[pdev->id]); + + return 0; +} + +static int serial_netx_remove(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&netx_reg, &sport->port); + + return 0; +} + +static struct platform_driver serial_netx_driver = { + .probe = serial_netx_probe, + .remove = serial_netx_remove, + + .suspend = serial_netx_suspend, + .resume = serial_netx_resume, + + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init netx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: NetX driver\n"); + + ret = uart_register_driver(&netx_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_netx_driver); + if (ret != 0) + uart_unregister_driver(&netx_reg); + + return 0; +} + +static void __exit netx_serial_exit(void) +{ + platform_driver_unregister(&serial_netx_driver); + uart_unregister_driver(&netx_reg); +} + +module_init(netx_serial_init); +module_exit(netx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("NetX serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c new file mode 100644 index 0000000..de17367 --- /dev/null +++ b/drivers/tty/serial/nwpserial.c @@ -0,0 +1,477 @@ +/* + * Serial Port driver for a NWP uart device + * + * Copyright (C) 2008 IBM Corp., Benjamin Krill + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NWPSERIAL_NR 2 + +#define NWPSERIAL_STATUS_RXVALID 0x1 +#define NWPSERIAL_STATUS_TXFULL 0x2 + +struct nwpserial_port { + struct uart_port port; + dcr_host_t dcr_host; + unsigned int ier; + unsigned int mcr; +}; + +static DEFINE_MUTEX(nwpserial_mutex); +static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; + +static void wait_for_bits(struct nwpserial_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = dcr_read(up->dcr_host, UART_LSR); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & bits) != bits); +} + +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE +static void nwpserial_console_putchar(struct uart_port *port, int c) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + /* check if tx buffer is full */ + wait_for_bits(up, UART_LSR_THRE); + dcr_write(up->dcr_host, UART_TX, c); + up->port.icount.tx++; +} + +static void +nwpserial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct nwpserial_port *up = &nwpserial_ports[co->index]; + unsigned long flags; + int locked = 1; + + if (oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + /* save and disable interrupt */ + up->ier = dcr_read(up->dcr_host, UART_IER); + dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); + + uart_console_write(&up->port, s, count, nwpserial_console_putchar); + + /* wait for transmitter to become empty */ + while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) + cpu_relax(); + + /* restore interrupt state */ + dcr_write(up->dcr_host, UART_IER, up->ier); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver nwpserial_reg; +static struct console nwpserial_console = { + .name = "ttySQ", + .write = nwpserial_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &nwpserial_reg, +}; +#define NWPSERIAL_CONSOLE (&nwpserial_console) +#else +#define NWPSERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ + +/**************************************************************************/ + +static int nwpserial_request_port(struct uart_port *port) +{ + return 0; +} + +static void nwpserial_release_port(struct uart_port *port) +{ + /* N/A */ +} + +static void nwpserial_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_NWPSERIAL; +} + +static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) +{ + struct nwpserial_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + irqreturn_t ret; + unsigned int iir; + unsigned char ch; + + spin_lock(&up->port.lock); + + /* check if the uart was the interrupt source. */ + iir = dcr_read(up->dcr_host, UART_IIR); + if (!iir) { + ret = IRQ_NONE; + goto out; + } + + do { + up->port.icount.rx++; + ch = dcr_read(up->dcr_host, UART_RX); + if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); + + tty_flip_buffer_push(tty); + ret = IRQ_HANDLED; + + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); +out: + spin_unlock(&up->port.lock); + return ret; +} + +static int nwpserial_startup(struct uart_port *port) +{ + struct nwpserial_port *up; + int err; + + up = container_of(port, struct nwpserial_port, port); + + /* disable flow control by default */ + up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; + dcr_write(up->dcr_host, UART_MCR, up->mcr); + + /* register interrupt handler */ + err = request_irq(up->port.irq, nwpserial_interrupt, + IRQF_SHARED, "nwpserial", up); + if (err) + return err; + + /* enable interrupts */ + up->ier = UART_IER_RDI; + dcr_write(up->dcr_host, UART_IER, up->ier); + + /* enable receiving */ + up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; + + return 0; +} + +static void nwpserial_shutdown(struct uart_port *port) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + + /* disable receiving */ + up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; + + /* disable interrupts from this port */ + up->ier = 0; + dcr_write(up->dcr_host, UART_IER, up->ier); + + /* free irq */ + free_irq(up->port.irq, port); +} + +static int nwpserial_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char *nwpserial_type(struct uart_port *port) +{ + return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; +} + +static void nwpserial_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + + up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID + | NWPSERIAL_STATUS_TXFULL; + + up->port.ignore_status_mask = 0; + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; + + /* Copy back the old hardware settings */ + if (old) + tty_termios_copy_hw(termios, old); +} + +static void nwpserial_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static void nwpserial_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void nwpserial_stop_rx(struct uart_port *port) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + /* don't forward any more data (like !CREAD) */ + up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; +} + +static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) +{ + /* check if tx buffer is full */ + wait_for_bits(up, UART_LSR_THRE); + dcr_write(up->dcr_host, UART_TX, c); + up->port.icount.tx++; +} + +static void nwpserial_start_tx(struct uart_port *port) +{ + struct nwpserial_port *up; + struct circ_buf *xmit; + up = container_of(port, struct nwpserial_port, port); + xmit = &up->port.state->xmit; + + if (port->x_char) { + nwpserial_putchar(up, up->port.x_char); + port->x_char = 0; + } + + while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { + nwpserial_putchar(up, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + } +} + +static unsigned int nwpserial_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* N/A */ +} + +static void nwpserial_stop_tx(struct uart_port *port) +{ + /* N/A */ +} + +static unsigned int nwpserial_tx_empty(struct uart_port *port) +{ + struct nwpserial_port *up; + unsigned long flags; + int ret; + up = container_of(port, struct nwpserial_port, port); + + spin_lock_irqsave(&up->port.lock, flags); + ret = dcr_read(up->dcr_host, UART_LSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; +} + +static struct uart_ops nwpserial_pops = { + .tx_empty = nwpserial_tx_empty, + .set_mctrl = nwpserial_set_mctrl, + .get_mctrl = nwpserial_get_mctrl, + .stop_tx = nwpserial_stop_tx, + .start_tx = nwpserial_start_tx, + .stop_rx = nwpserial_stop_rx, + .enable_ms = nwpserial_enable_ms, + .break_ctl = nwpserial_break_ctl, + .startup = nwpserial_startup, + .shutdown = nwpserial_shutdown, + .set_termios = nwpserial_set_termios, + .type = nwpserial_type, + .release_port = nwpserial_release_port, + .request_port = nwpserial_request_port, + .config_port = nwpserial_config_port, + .verify_port = nwpserial_verify_port, +}; + +static struct uart_driver nwpserial_reg = { + .owner = THIS_MODULE, + .driver_name = "nwpserial", + .dev_name = "ttySQ", + .major = TTY_MAJOR, + .minor = 68, + .nr = NWPSERIAL_NR, + .cons = NWPSERIAL_CONSOLE, +}; + +int nwpserial_register_port(struct uart_port *port) +{ + struct nwpserial_port *up = NULL; + int ret = -1; + int i; + static int first = 1; + int dcr_len; + int dcr_base; + struct device_node *dn; + + mutex_lock(&nwpserial_mutex); + + dn = port->dev->of_node; + if (dn == NULL) + goto out; + + /* get dcr base. */ + dcr_base = dcr_resource_start(dn, 0); + + /* find matching entry */ + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.iobase == dcr_base) { + up = &nwpserial_ports[i]; + break; + } + + /* we didn't find a mtching entry, search for a free port */ + if (up == NULL) + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.type == PORT_UNKNOWN && + nwpserial_ports[i].port.iobase == 0) { + up = &nwpserial_ports[i]; + break; + } + + if (up == NULL) { + ret = -EBUSY; + goto out; + } + + if (first) + uart_register_driver(&nwpserial_reg); + first = 0; + + up->port.membase = port->membase; + up->port.irq = port->irq; + up->port.uartclk = port->uartclk; + up->port.fifosize = port->fifosize; + up->port.regshift = port->regshift; + up->port.iotype = port->iotype; + up->port.flags = port->flags; + up->port.mapbase = port->mapbase; + up->port.private_data = port->private_data; + + if (port->dev) + up->port.dev = port->dev; + + if (up->port.iobase != dcr_base) { + up->port.ops = &nwpserial_pops; + up->port.fifosize = 16; + + spin_lock_init(&up->port.lock); + + up->port.iobase = dcr_base; + dcr_len = dcr_resource_len(dn, 0); + + up->dcr_host = dcr_map(dn, dcr_base, dcr_len); + if (!DCR_MAP_OK(up->dcr_host)) { + printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); + goto out; + } + } + + ret = uart_add_one_port(&nwpserial_reg, &up->port); + if (ret == 0) + ret = up->port.line; + +out: + mutex_unlock(&nwpserial_mutex); + + return ret; +} +EXPORT_SYMBOL(nwpserial_register_port); + +void nwpserial_unregister_port(int line) +{ + struct nwpserial_port *up = &nwpserial_ports[line]; + mutex_lock(&nwpserial_mutex); + uart_remove_one_port(&nwpserial_reg, &up->port); + + up->port.type = PORT_UNKNOWN; + + mutex_unlock(&nwpserial_mutex); +} +EXPORT_SYMBOL(nwpserial_unregister_port); + +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE +static int __init nwpserial_console_init(void) +{ + struct nwpserial_port *up = NULL; + struct device_node *dn; + const char *name; + int dcr_base; + int dcr_len; + int i; + + /* search for a free port */ + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { + up = &nwpserial_ports[i]; + break; + } + + if (up == NULL) + return -1; + + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) + return -1; + + dn = of_find_node_by_path(name); + if (!dn) + return -1; + + spin_lock_init(&up->port.lock); + up->port.ops = &nwpserial_pops; + up->port.type = PORT_NWPSERIAL; + up->port.fifosize = 16; + + dcr_base = dcr_resource_start(dn, 0); + dcr_len = dcr_resource_len(dn, 0); + up->port.iobase = dcr_base; + + up->dcr_host = dcr_map(dn, dcr_base, dcr_len); + if (!DCR_MAP_OK(up->dcr_host)) { + printk("Cannot map DCR resources for SERIAL"); + return -1; + } + register_console(&nwpserial_console); + return 0; +} +console_initcall(nwpserial_console_init); +#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c new file mode 100644 index 0000000..5c7abe4 --- /dev/null +++ b/drivers/tty/serial/of_serial.c @@ -0,0 +1,201 @@ +/* + * Serial Port driver for Open Firmware platform devices + * + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct of_serial_info { + int type; + int line; +}; + +/* + * Fill a struct uart_port for a given device node + */ +static int __devinit of_platform_serial_setup(struct platform_device *ofdev, + int type, struct uart_port *port) +{ + struct resource resource; + struct device_node *np = ofdev->dev.of_node; + const __be32 *clk, *spd; + const __be32 *prop; + int ret, prop_size; + + memset(port, 0, sizeof *port); + spd = of_get_property(np, "current-speed", NULL); + clk = of_get_property(np, "clock-frequency", NULL); + if (!clk) { + dev_warn(&ofdev->dev, "no clock-frequency property set\n"); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&ofdev->dev, "invalid address\n"); + return ret; + } + + spin_lock_init(&port->lock); + port->mapbase = resource.start; + + /* Check for shifted address mapping */ + prop = of_get_property(np, "reg-offset", &prop_size); + if (prop && (prop_size == sizeof(u32))) + port->mapbase += be32_to_cpup(prop); + + /* Check for registers offset within the devices address range */ + prop = of_get_property(np, "reg-shift", &prop_size); + if (prop && (prop_size == sizeof(u32))) + port->regshift = be32_to_cpup(prop); + + port->irq = irq_of_parse_and_map(np, 0); + port->iotype = UPIO_MEM; + port->type = type; + port->uartclk = be32_to_cpup(clk); + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP + | UPF_FIXED_PORT | UPF_FIXED_TYPE; + port->dev = &ofdev->dev; + /* If current-speed was set, then try not to change it. */ + if (spd) + port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); + + return 0; +} + +/* + * Try to register a serial port + */ +static int __devinit of_platform_serial_probe(struct platform_device *ofdev, + const struct of_device_id *id) +{ + struct of_serial_info *info; + struct uart_port port; + int port_type; + int ret; + + if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) + return -EBUSY; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + port_type = (unsigned long)id->data; + ret = of_platform_serial_setup(ofdev, port_type, &port); + if (ret) + goto out; + + switch (port_type) { +#ifdef CONFIG_SERIAL_8250 + case PORT_8250 ... PORT_MAX_8250: + ret = serial8250_register_port(&port); + break; +#endif +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + case PORT_NWPSERIAL: + ret = nwpserial_register_port(&port); + break; +#endif + default: + /* need to add code for these */ + case PORT_UNKNOWN: + dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); + ret = -ENODEV; + break; + } + if (ret < 0) + goto out; + + info->type = port_type; + info->line = ret; + dev_set_drvdata(&ofdev->dev, info); + return 0; +out: + kfree(info); + irq_dispose_mapping(port.irq); + return ret; +} + +/* + * Release a line + */ +static int of_platform_serial_remove(struct platform_device *ofdev) +{ + struct of_serial_info *info = dev_get_drvdata(&ofdev->dev); + switch (info->type) { +#ifdef CONFIG_SERIAL_8250 + case PORT_8250 ... PORT_MAX_8250: + serial8250_unregister_port(info->line); + break; +#endif +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + case PORT_NWPSERIAL: + nwpserial_unregister_port(info->line); + break; +#endif + default: + /* need to add code for these */ + break; + } + kfree(info); + return 0; +} + +/* + * A few common types, add more as needed. + */ +static struct of_device_id __devinitdata of_platform_serial_table[] = { + { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + { .type = "serial", .compatible = "ibm,qpace-nwp-serial", + .data = (void *)PORT_NWPSERIAL, }, +#endif + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { /* end of list */ }, +}; + +static struct of_platform_driver of_platform_serial_driver = { + .driver = { + .name = "of_serial", + .owner = THIS_MODULE, + .of_match_table = of_platform_serial_table, + }, + .probe = of_platform_serial_probe, + .remove = of_platform_serial_remove, +}; + +static int __init of_platform_serial_init(void) +{ + return of_register_platform_driver(&of_platform_serial_driver); +} +module_init(of_platform_serial_init); + +static void __exit of_platform_serial_exit(void) +{ + return of_unregister_platform_driver(&of_platform_serial_driver); +}; +module_exit(of_platform_serial_exit); + +MODULE_AUTHOR("Arnd Bergmann "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c new file mode 100644 index 0000000..7f2f010 --- /dev/null +++ b/drivers/tty/serial/omap-serial.c @@ -0,0 +1,1359 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R + * Thara Gopinath + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note: This driver is made seperate from 8250 driver as we cannot + * over load 8250 driver with omap platform specific configuration for + * features like DMA, it makes easier to implement features like DMA and + * hardware flow control and software flow control configuration with + * this driver as required for the omap-platform. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; + +/* Forward declaration of functions */ +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); +static void serial_omap_rx_timeout(unsigned long uart_no); +static int serial_omap_start_rxdma(struct uart_omap_port *up); + +static inline unsigned int serial_in(struct uart_omap_port *up, int offset) +{ + offset <<= up->port.regshift; + return readw(up->port.membase + offset); +} + +static inline void serial_out(struct uart_omap_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + writew(value, up->port.membase + offset); +} + +static inline void serial_omap_clear_fifos(struct uart_omap_port *up) +{ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +/* + * serial_omap_get_divisor - calculate divisor value + * @port: uart port info + * @baud: baudrate for which divisor needs to be calculated. + * + * We have written our own function to get the divisor so as to support + * 13x mode. 3Mbps Baudrate as an different divisor. + * Reference OMAP TRM Chapter 17: + * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates + * referring to oversampling - divisor value + * baudrate 460,800 to 3,686,400 all have divisor 13 + * except 3,000,000 which has divisor value 16 + */ +static unsigned int +serial_omap_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int divisor; + + if (baud > OMAP_MODE13X_SPEED && baud != 3000000) + divisor = 13; + else + divisor = 16; + return port->uartclk/(baud * divisor); +} + +static void serial_omap_stop_rxdma(struct uart_omap_port *up) +{ + if (up->uart_dma.rx_dma_used) { + del_timer(&up->uart_dma.rx_timer); + omap_stop_dma(up->uart_dma.rx_dma_channel); + omap_free_dma(up->uart_dma.rx_dma_channel); + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_used = false; + } +} + +static void serial_omap_enable_ms(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_omap_stop_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma && + up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { + /* + * Check if dma is still active. If yes do nothing, + * return. Else stop dma + */ + if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) + return; + omap_stop_dma(up->uart_dma.tx_dma_channel); + omap_free_dma(up->uart_dma.tx_dma_channel); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_stop_rx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma) + serial_omap_stop_rxdma(up); + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_omap_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int flag; + unsigned char ch, lsr = *status; + int max_count = 256; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) { + up->port.icount.parity++; + } else if (lsr & UART_LSR_FE) { + up->port.icount.frame++; + } + + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + lsr |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); +ignore_char: + lsr = serial_in(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); +} + +static void transmit_chars(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_omap_stop_tx(&up->port); + return; + } + count = up->port.fifosize / 4; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_omap_stop_tx(&up->port); +} + +static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) +{ + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_start_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + struct circ_buf *xmit; + unsigned int start; + int ret = 0; + + if (!up->use_dma) { + serial_omap_enable_ier_thri(up); + return; + } + + if (up->uart_dma.tx_dma_used) + return; + + xmit = &up->port.state->xmit; + + if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + ret = omap_request_dma(up->uart_dma.uart_dma_tx, + "UART Tx DMA", + (void *)uart_tx_dma_callback, up, + &(up->uart_dma.tx_dma_channel)); + + if (ret < 0) { + serial_omap_enable_ier_thri(up); + return; + } + } + spin_lock(&(up->uart_dma.tx_lock)); + up->uart_dma.tx_dma_used = true; + spin_unlock(&(up->uart_dma.tx_lock)); + + start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + + UART_XMIT_SIZE) - start; + + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static unsigned int check_modem_status(struct uart_omap_port *up) +{ + unsigned int status; + + status = serial_in(up, UART_MSR); + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if ((status & UART_MSR_ANY_DELTA) == 0) + return status; + + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change + (&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change + (&up->port, status & UART_MSR_CTS); + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +/** + * serial_omap_irq() - This handles the interrupt from one port + * @irq: uart port irq number + * @dev_id: uart port info + */ +static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) +{ + struct uart_omap_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + if (iir & UART_IIR_RLSI) { + if (!up->use_dma) { + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + } else { + up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + if ((serial_omap_start_rxdma(up) != 0) && + (lsr & UART_LSR_DR)) + receive_chars(up, &lsr); + } + } + + check_modem_status(up); + if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + up->port_activity = jiffies; + return IRQ_HANDLED; +} + +static unsigned int serial_omap_tx_empty(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + unsigned int ret = 0; + + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_omap_get_mctrl(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char status; + unsigned int ret = 0; + + status = check_modem_status(up); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char mcr = 0; + + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + serial_out(up, UART_MCR, mcr); +} + +static void serial_omap_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_omap_startup(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, + up->name, up); + if (retval) + return retval; + + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_omap_clear_fifos(up); + /* For Hardware flow control */ + serial_out(up, UART_MCR, UART_MCR_RTS); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + spin_lock_irqsave(&up->port.lock, flags); + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + up->port.mctrl |= TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + up->msr_saved_flags = 0; + if (up->use_dma) { + free_page((unsigned long)up->port.state->xmit.buf); + up->port.state->xmit.buf = dma_alloc_coherent(NULL, + UART_XMIT_SIZE, + (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), + 0); + init_timer(&(up->uart_dma.rx_timer)); + up->uart_dma.rx_timer.function = serial_omap_rx_timeout; + up->uart_dma.rx_timer.data = up->pdev->id; + /* Currently the buffer size is 4KB. Can increase it */ + up->uart_dma.rx_buf = dma_alloc_coherent(NULL, + up->uart_dma.rx_buf_size, + (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); + } + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + + up->port_activity = jiffies; + return 0; +} + +static void serial_omap_shutdown(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_omap_clear_fifos(up); + + /* + * Read data port to reset things, and then free the irq + */ + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + if (up->use_dma) { + dma_free_coherent(up->port.dev, + UART_XMIT_SIZE, up->port.state->xmit.buf, + up->uart_dma.tx_buf_dma_phys); + up->port.state->xmit.buf = NULL; + serial_omap_stop_rx(port); + dma_free_coherent(up->port.dev, + up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, + up->uart_dma.rx_buf_dma_phys); + up->uart_dma.rx_buf = NULL; + } + free_irq(up->port.irq, up); +} + +static inline void +serial_omap_configure_xonxoff + (struct uart_omap_port *up, struct ktermios *termios) +{ + unsigned char efr = 0; + + up->lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); + + serial_out(up, UART_XON1, termios->c_cc[VSTART]); + serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); + + /* clear SW control mode bits */ + efr = up->efr; + efr &= OMAP_UART_SW_CLR; + + /* + * IXON Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXON) + efr |= OMAP_UART_SW_TX; + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXOFF) + efr |= OMAP_UART_SW_RX; + + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + up->mcr = serial_in(up, UART_MCR); + + /* + * IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= UART_MCR_XONANY; + + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Enable special char function UARTi.EFR_REG[5] and + * load the new software flow control mode IXON or IXOFF + * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. + */ + serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); + serial_out(up, UART_LCR, up->lcr); +} + +static void +serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char cval = 0; + unsigned char efr = 0; + unsigned long flags = 0; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); + quot = serial_omap_get_divisor(port, baud); + + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | + UART_FCR_ENABLE_FIFO; + if (up->use_dma) + up->fcr |= UART_FCR_DMA_SELECT; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, cval); /* reset DLAB */ + + /* FIFOs and DMA Settings */ + + /* FCR can be changed only when the + * baud clock is not running + * DLL_REG and DLH_REG set to 0. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_DLL, 0); + serial_out(up, UART_DLM, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + /* FIFO ENABLE, DMA MODE */ + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + if (up->use_dma) { + serial_out(up, UART_TI752_TLR, 0); + serial_out(up, UART_OMAP_SCR, + (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + } + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + + /* Protocol, Baud Rate, and Interrupt Settings */ + + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, cval); + + if (baud > 230400 && baud != 3000000) + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + + /* Hardware Flow Control Configuration */ + + if (termios->c_cflag & CRTSCTS) { + efr |= (UART_EFR_CTS | UART_EFR_RTS); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS); + serial_out(up, UART_LCR, cval); + } + + serial_omap_set_mctrl(&up->port, up->port.mctrl); + /* Software Flow Control Configuration */ + if (termios->c_iflag & (IXON | IXOFF)) + serial_omap_configure_xonxoff(up, termios); + + spin_unlock_irqrestore(&up->port.lock, flags); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); +} + +static void +serial_omap_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char efr; + + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, + (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); +} + +static void serial_omap_release_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_release_port+\n"); +} + +static int serial_omap_request_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_request_port+\n"); + return 0; +} + +static void serial_omap_config_port(struct uart_port *port, int flags) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", + up->pdev->id); + up->port.type = PORT_OMAP; +} + +static int +serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + dev_dbg(port->dev, "serial_omap_verify_port+\n"); + return -EINVAL; +} + +static const char * +serial_omap_type(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + return up->name; +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static inline void wait_for_xmitr(struct uart_omap_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + + udelay(1); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static int serial_omap_poll_get_char(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned int status = serial_in(up, UART_LSR); + + if (!(status & UART_LSR_DR)) + return NO_POLL_CHAR; + + return serial_in(up, UART_RX); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + +static struct uart_omap_port *serial_omap_console_ports[4]; + +static struct uart_driver serial_omap_reg; + +static void serial_omap_console_putchar(struct uart_port *port, int ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static void +serial_omap_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_omap_port *up = serial_omap_console_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_omap_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init +serial_omap_console_setup(struct console *co, char *options) +{ + struct uart_omap_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (serial_omap_console_ports[co->index] == NULL) + return -ENODEV; + up = serial_omap_console_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_omap_console = { + .name = OMAP_SERIAL_NAME, + .write = serial_omap_console_write, + .device = uart_console_device, + .setup = serial_omap_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_omap_reg, +}; + +static void serial_omap_add_console_port(struct uart_omap_port *up) +{ + serial_omap_console_ports[up->pdev->id] = up; +} + +#define OMAP_CONSOLE (&serial_omap_console) + +#else + +#define OMAP_CONSOLE NULL + +static inline void serial_omap_add_console_port(struct uart_omap_port *up) +{} + +#endif + +static struct uart_ops serial_omap_pops = { + .tx_empty = serial_omap_tx_empty, + .set_mctrl = serial_omap_set_mctrl, + .get_mctrl = serial_omap_get_mctrl, + .stop_tx = serial_omap_stop_tx, + .start_tx = serial_omap_start_tx, + .stop_rx = serial_omap_stop_rx, + .enable_ms = serial_omap_enable_ms, + .break_ctl = serial_omap_break_ctl, + .startup = serial_omap_startup, + .shutdown = serial_omap_shutdown, + .set_termios = serial_omap_set_termios, + .pm = serial_omap_pm, + .type = serial_omap_type, + .release_port = serial_omap_release_port, + .request_port = serial_omap_request_port, + .config_port = serial_omap_config_port, + .verify_port = serial_omap_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = serial_omap_poll_put_char, + .poll_get_char = serial_omap_poll_get_char, +#endif +}; + +static struct uart_driver serial_omap_reg = { + .owner = THIS_MODULE, + .driver_name = "OMAP-SERIAL", + .dev_name = OMAP_SERIAL_NAME, + .nr = OMAP_MAX_HSUART_PORTS, + .cons = OMAP_CONSOLE, +}; + +static int +serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct uart_omap_port *up = platform_get_drvdata(pdev); + + if (up) + uart_suspend_port(&serial_omap_reg, &up->port); + return 0; +} + +static int serial_omap_resume(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + if (up) + uart_resume_port(&serial_omap_reg, &up->port); + return 0; +} + +static void serial_omap_rx_timeout(unsigned long uart_no) +{ + struct uart_omap_port *up = ui[uart_no]; + unsigned int curr_dma_pos, curr_transmitted_size; + int ret = 0; + + curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); + if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || + (curr_dma_pos == 0)) { + if (jiffies_to_msecs(jiffies - up->port_activity) < + RX_TIMEOUT) { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } else { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + return; + } + + curr_transmitted_size = curr_dma_pos - + up->uart_dma.prev_rx_dma_pos; + up->port.icount.rx += curr_transmitted_size; + tty_insert_flip_string(up->port.state->port.tty, + up->uart_dma.rx_buf + + (up->uart_dma.prev_rx_dma_pos - + up->uart_dma.rx_buf_dma_phys), + curr_transmitted_size); + tty_flip_buffer_push(up->port.state->port.tty); + up->uart_dma.prev_rx_dma_pos = curr_dma_pos; + if (up->uart_dma.rx_buf_size + + up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { + ret = serial_omap_start_rxdma(up); + if (ret < 0) { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + } else { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } + up->port_activity = jiffies; +} + +static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) +{ + return; +} + +static int serial_omap_start_rxdma(struct uart_omap_port *up) +{ + int ret = 0; + + if (up->uart_dma.rx_dma_channel == -1) { + ret = omap_request_dma(up->uart_dma.uart_dma_rx, + "UART Rx DMA", + (void *)uart_rx_dma_callback, up, + &(up->uart_dma.rx_dma_channel)); + if (ret < 0) + return ret; + + omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, + up->uart_dma.rx_buf_dma_phys, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.rx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_rx, 0); + } + up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.rx_dma_channel); + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + up->uart_dma.rx_dma_used = true; + return ret; +} + +static void serial_omap_continue_tx(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + unsigned int start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + if (uart_circ_empty(xmit)) + return; + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) +{ + struct uart_omap_port *up = (struct uart_omap_port *)data; + struct circ_buf *xmit = &up->port.state->xmit; + + xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ + (UART_XMIT_SIZE - 1); + up->port.icount.tx += up->uart_dma.tx_buf_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) { + spin_lock(&(up->uart_dma.tx_lock)); + serial_omap_stop_tx(&up->port); + up->uart_dma.tx_dma_used = false; + spin_unlock(&(up->uart_dma.tx_lock)); + } else { + omap_stop_dma(up->uart_dma.tx_dma_channel); + serial_omap_continue_tx(up); + } + up->port_activity = jiffies; + return; +} + +static int serial_omap_probe(struct platform_device *pdev) +{ + struct uart_omap_port *up; + struct resource *mem, *irq, *dma_tx, *dma_rx; + struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; + int ret = -ENOSPC; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -ENODEV; + } + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource?\n"); + return -ENODEV; + } + + if (!request_mem_region(mem->start, (mem->end - mem->start) + 1, + pdev->dev.driver->name)) { + dev_err(&pdev->dev, "memory region already claimed\n"); + return -EBUSY; + } + + dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!dma_rx) { + ret = -EINVAL; + goto err; + } + + dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!dma_tx) { + ret = -EINVAL; + goto err; + } + + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (up == NULL) { + ret = -ENOMEM; + goto do_release_region; + } + sprintf(up->name, "OMAP UART%d", pdev->id); + up->pdev = pdev; + up->port.dev = &pdev->dev; + up->port.type = PORT_OMAP; + up->port.iotype = UPIO_MEM; + up->port.irq = irq->start; + + up->port.regshift = 2; + up->port.fifosize = 64; + up->port.ops = &serial_omap_pops; + up->port.line = pdev->id; + + up->port.membase = omap_up_info->membase; + up->port.mapbase = omap_up_info->mapbase; + up->port.flags = omap_up_info->flags; + up->port.irqflags = omap_up_info->irqflags; + up->port.uartclk = omap_up_info->uartclk; + up->uart_dma.uart_base = mem->start; + + if (omap_up_info->dma_enabled) { + up->uart_dma.uart_dma_tx = dma_tx->start; + up->uart_dma.uart_dma_rx = dma_rx->start; + up->use_dma = 1; + up->uart_dma.rx_buf_size = 4096; + up->uart_dma.rx_timeout = 2; + spin_lock_init(&(up->uart_dma.tx_lock)); + spin_lock_init(&(up->uart_dma.rx_lock)); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + ui[pdev->id] = up; + serial_omap_add_console_port(up); + + ret = uart_add_one_port(&serial_omap_reg, &up->port); + if (ret != 0) + goto do_release_region; + + platform_set_drvdata(pdev, up); + return 0; +err: + dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", + pdev->id, __func__, ret); +do_release_region: + release_mem_region(mem->start, (mem->end - mem->start) + 1); + return ret; +} + +static int serial_omap_remove(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + if (up) { + uart_remove_one_port(&serial_omap_reg, &up->port); + kfree(up); + } + return 0; +} + +static struct platform_driver serial_omap_driver = { + .probe = serial_omap_probe, + .remove = serial_omap_remove, + + .suspend = serial_omap_suspend, + .resume = serial_omap_resume, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init serial_omap_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_omap_reg); + if (ret != 0) + return ret; + ret = platform_driver_register(&serial_omap_driver); + if (ret != 0) + uart_unregister_driver(&serial_omap_reg); + return ret; +} + +static void __exit serial_omap_exit(void) +{ + platform_driver_unregister(&serial_omap_driver); + uart_unregister_driver(&serial_omap_reg); +} + +module_init(serial_omap_init); +module_exit(serial_omap_exit); + +MODULE_DESCRIPTION("OMAP High Speed UART driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c new file mode 100644 index 0000000..70a6145 --- /dev/null +++ b/drivers/tty/serial/pch_uart.c @@ -0,0 +1,1451 @@ +/* + *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * + *This program is free software; you can redistribute it and/or modify + *it under the terms of the GNU General Public License as published by + *the Free Software Foundation; version 2 of the License. + * + *This program is distributed in the hope that it will be useful, + *but WITHOUT ANY WARRANTY; without even the implied warranty of + *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + *GNU General Public License for more details. + * + *You should have received a copy of the GNU General Public License + *along with this program; if not, write to the Free Software + *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +enum { + PCH_UART_HANDLED_RX_INT_SHIFT, + PCH_UART_HANDLED_TX_INT_SHIFT, + PCH_UART_HANDLED_RX_ERR_INT_SHIFT, + PCH_UART_HANDLED_RX_TRG_INT_SHIFT, + PCH_UART_HANDLED_MS_INT_SHIFT, +}; + +enum { + PCH_UART_8LINE, + PCH_UART_2LINE, +}; + +#define PCH_UART_DRIVER_DEVICE "ttyPCH" + +#define PCH_UART_NR_GE_256FIFO 1 +#define PCH_UART_NR_GE_64FIFO 3 +#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) +#define PCH_UART_NR PCH_UART_NR_GE + +#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ + PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ + PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) + +#define PCH_UART_RBR 0x00 +#define PCH_UART_THR 0x00 + +#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ + PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) +#define PCH_UART_IER_ERBFI 0x00000001 +#define PCH_UART_IER_ETBEI 0x00000002 +#define PCH_UART_IER_ELSI 0x00000004 +#define PCH_UART_IER_EDSSI 0x00000008 + +#define PCH_UART_IIR_IP 0x00000001 +#define PCH_UART_IIR_IID 0x00000006 +#define PCH_UART_IIR_MSI 0x00000000 +#define PCH_UART_IIR_TRI 0x00000002 +#define PCH_UART_IIR_RRI 0x00000004 +#define PCH_UART_IIR_REI 0x00000006 +#define PCH_UART_IIR_TOI 0x00000008 +#define PCH_UART_IIR_FIFO256 0x00000020 +#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 +#define PCH_UART_IIR_FE 0x000000C0 + +#define PCH_UART_FCR_FIFOE 0x00000001 +#define PCH_UART_FCR_RFR 0x00000002 +#define PCH_UART_FCR_TFR 0x00000004 +#define PCH_UART_FCR_DMS 0x00000008 +#define PCH_UART_FCR_FIFO256 0x00000020 +#define PCH_UART_FCR_RFTL 0x000000C0 + +#define PCH_UART_FCR_RFTL1 0x00000000 +#define PCH_UART_FCR_RFTL64 0x00000040 +#define PCH_UART_FCR_RFTL128 0x00000080 +#define PCH_UART_FCR_RFTL224 0x000000C0 +#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL_SHIFT 6 + +#define PCH_UART_LCR_WLS 0x00000003 +#define PCH_UART_LCR_STB 0x00000004 +#define PCH_UART_LCR_PEN 0x00000008 +#define PCH_UART_LCR_EPS 0x00000010 +#define PCH_UART_LCR_SP 0x00000020 +#define PCH_UART_LCR_SB 0x00000040 +#define PCH_UART_LCR_DLAB 0x00000080 +#define PCH_UART_LCR_NP 0x00000000 +#define PCH_UART_LCR_OP PCH_UART_LCR_PEN +#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) +#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) +#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ + PCH_UART_LCR_SP) + +#define PCH_UART_LCR_5BIT 0x00000000 +#define PCH_UART_LCR_6BIT 0x00000001 +#define PCH_UART_LCR_7BIT 0x00000002 +#define PCH_UART_LCR_8BIT 0x00000003 + +#define PCH_UART_MCR_DTR 0x00000001 +#define PCH_UART_MCR_RTS 0x00000002 +#define PCH_UART_MCR_OUT 0x0000000C +#define PCH_UART_MCR_LOOP 0x00000010 +#define PCH_UART_MCR_AFE 0x00000020 + +#define PCH_UART_LSR_DR 0x00000001 +#define PCH_UART_LSR_ERR (1<<7) + +#define PCH_UART_MSR_DCTS 0x00000001 +#define PCH_UART_MSR_DDSR 0x00000002 +#define PCH_UART_MSR_TERI 0x00000004 +#define PCH_UART_MSR_DDCD 0x00000008 +#define PCH_UART_MSR_CTS 0x00000010 +#define PCH_UART_MSR_DSR 0x00000020 +#define PCH_UART_MSR_RI 0x00000040 +#define PCH_UART_MSR_DCD 0x00000080 +#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ + PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) + +#define PCH_UART_DLL 0x00 +#define PCH_UART_DLM 0x01 + +#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b)) + +#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) +#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) +#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) +#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) +#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) + +#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) +#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) +#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) +#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) +#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) +#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) +#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) +#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) +#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) +#define PCH_UART_HAL_STB1 0 +#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) + +#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) +#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) +#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ + PCH_UART_HAL_CLR_RX_FIFO) + +#define PCH_UART_HAL_DMA_MODE0 0 +#define PCH_UART_HAL_FIFO_DIS 0 +#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) +#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ + PCH_UART_FCR_FIFO256) +#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) +#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) +#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) +#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) +#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) +#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) +#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) +#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) +#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) +#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) + +#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) +#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) +#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) +#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) +#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) + +#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) +#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) +#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) +#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) +#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) + +struct pch_uart_buffer { + unsigned char *buf; + int size; +}; + +struct eg20t_port { + struct uart_port port; + int port_type; + void __iomem *membase; + resource_size_t mapbase; + unsigned int iobase; + struct pci_dev *pdev; + int fifo_size; + int base_baud; + int start_tx; + int start_rx; + int tx_empty; + int int_dis_flag; + int trigger; + int trigger_level; + struct pch_uart_buffer rxbuf; + unsigned int dmsr; + unsigned int fcr; + unsigned int use_dma; + unsigned int use_dma_flag; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + struct pch_dma_slave param_tx; + struct pch_dma_slave param_rx; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct scatterlist sg_tx; + struct scatterlist sg_rx; + int tx_dma_use; + void *rx_buf_virt; + dma_addr_t rx_buf_dma; +}; + +static unsigned int default_baud = 9600; +static const int trigger_level_256[4] = { 1, 64, 128, 224 }; +static const int trigger_level_64[4] = { 1, 16, 32, 56 }; +static const int trigger_level_16[4] = { 1, 4, 8, 14 }; +static const int trigger_level_1[4] = { 1, 1, 1, 1 }; + +static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize, + int base_baud) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + priv->trigger_level = 1; + priv->fcr = 0; +} + +static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base) +{ + unsigned int msr = ioread8(base + UART_MSR); + priv->dmsr |= msr & PCH_UART_MSR_DELTA; + + return msr; +} + +static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier |= flag & PCH_UART_IER_MASK; + iowrite8(ier, priv->membase + UART_IER); +} + +static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier &= ~(flag & PCH_UART_IER_MASK); + iowrite8(ier, priv->membase + UART_IER); +} + +static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, + unsigned int parity, unsigned int bits, + unsigned int stb) +{ + unsigned int dll, dlm, lcr; + int div; + + div = DIV_ROUND(priv->base_baud / 16, baud); + if (div < 0 || USHRT_MAX <= div) { + pr_err("Invalid Baud(div=0x%x)\n", div); + return -EINVAL; + } + + dll = (unsigned int)div & 0x00FFU; + dlm = ((unsigned int)div >> 8) & 0x00FFU; + + if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { + pr_err("Invalid parity(0x%x)\n", parity); + return -EINVAL; + } + + if (bits & ~PCH_UART_LCR_WLS) { + pr_err("Invalid bits(0x%x)\n", bits); + return -EINVAL; + } + + if (stb & ~PCH_UART_LCR_STB) { + pr_err("Invalid STB(0x%x)\n", stb); + return -EINVAL; + } + + lcr = parity; + lcr |= bits; + lcr |= stb; + + pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + __func__, baud, div, lcr, jiffies); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + iowrite8(dll, priv->membase + PCH_UART_DLL); + iowrite8(dlm, priv->membase + PCH_UART_DLM); + iowrite8(lcr, priv->membase + UART_LCR); + + return 0; +} + +static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, + unsigned int flag) +{ + if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { + pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); + return -EINVAL; + } + + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, + priv->membase + UART_FCR); + iowrite8(priv->fcr, priv->membase + UART_FCR); + + return 0; +} + +static int pch_uart_hal_set_fifo(struct eg20t_port *priv, + unsigned int dmamode, + unsigned int fifo_size, unsigned int trigger) +{ + u8 fcr; + + if (dmamode & ~PCH_UART_FCR_DMS) { + pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); + return -EINVAL; + } + + if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { + pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); + return -EINVAL; + } + + if (trigger & ~PCH_UART_FCR_RFTL) { + pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); + return -EINVAL; + } + + switch (priv->fifo_size) { + case 256: + priv->trigger_level = + trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 64: + priv->trigger_level = + trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 16: + priv->trigger_level = + trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + default: + priv->trigger_level = + trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + } + fcr = + dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; + iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, + priv->membase + UART_FCR); + iowrite8(fcr, priv->membase + UART_FCR); + priv->fcr = fcr; + + return 0; +} + +static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) +{ + priv->dmsr = 0; + return get_msr(priv, priv->membase); +} + +static int pch_uart_hal_write(struct eg20t_port *priv, + const unsigned char *buf, int tx_size) +{ + int i; + unsigned int thr; + + for (i = 0; i < tx_size;) { + thr = buf[i++]; + iowrite8(thr, priv->membase + PCH_UART_THR); + } + return i; +} + +static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, + int rx_size) +{ + int i; + u8 rbr, lsr; + + lsr = ioread8(priv->membase + UART_LSR); + for (i = 0, lsr = ioread8(priv->membase + UART_LSR); + i < rx_size && lsr & UART_LSR_DR; + lsr = ioread8(priv->membase + UART_LSR)) { + rbr = ioread8(priv->membase + PCH_UART_RBR); + buf[i++] = rbr; + } + return i; +} + +static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv) +{ + unsigned int iir; + int ret; + + iir = ioread8(priv->membase + UART_IIR); + ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP)); + return ret; +} + +static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_LSR); +} + +static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) +{ + unsigned int lcr; + + lcr = ioread8(priv->membase + UART_LCR); + if (on) + lcr |= PCH_UART_LCR_SB; + else + lcr &= ~PCH_UART_LCR_SB; + + iowrite8(lcr, priv->membase + UART_LCR); +} + +static int push_rx(struct eg20t_port *priv, const unsigned char *buf, + int size) +{ + struct uart_port *port; + struct tty_struct *tty; + + port = &priv->port; + tty = tty_port_tty_get(&port->state->port); + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return -EBUSY; + } + + tty_insert_flip_string(tty, buf, size); + tty_flip_buffer_push(tty); + tty_kref_put(tty); + + return 0; +} + +static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) +{ + int ret; + struct uart_port *port = &priv->port; + + if (port->x_char) { + pr_debug("%s:X character send %02x (%lu)\n", __func__, + port->x_char, jiffies); + buf[0] = port->x_char; + port->x_char = 0; + ret = 1; + } else { + ret = 0; + } + + return ret; +} + +static int dma_push_rx(struct eg20t_port *priv, int size) +{ + struct tty_struct *tty; + int room; + struct uart_port *port = &priv->port; + + port = &priv->port; + tty = tty_port_tty_get(&port->state->port); + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return 0; + } + + room = tty_buffer_request_room(tty, size); + + if (room < size) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + size - room); + if (!room) + return room; + + tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size); + + port->icount.rx += room; + tty_kref_put(tty); + + return room; +} + +static void pch_free_dma(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + + if (priv->chan_tx) { + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + } + if (priv->chan_rx) { + dma_release_channel(priv->chan_rx); + priv->chan_rx = NULL; + } + if (sg_dma_address(&priv->sg_rx)) + dma_free_coherent(port->dev, port->fifosize, + sg_virt(&priv->sg_rx), + sg_dma_address(&priv->sg_rx)); + + return; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct pch_dma_slave *param = slave; + + if ((chan->chan_id == param->chan_id) && (param->dma_dev == + chan->device->dev)) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void pch_request_dma(struct uart_port *port) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct pci_dev *dma_dev; + struct pch_dma_slave *param; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev + information */ + /* Set Tx DMA */ + param = &priv->param_tx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line; + param->tx_reg = port->mapbase + UART_TX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); + return; + } + priv->chan_tx = chan; + + /* Set Rx DMA */ + param = &priv->param_rx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ + param->rx_reg = port->mapbase + UART_RX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); + dma_release_channel(priv->chan_tx); + return; + } + + /* Get Consistent memory for DMA */ + priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, + &priv->rx_buf_dma, GFP_KERNEL); + priv->chan_rx = chan; +} + +static void pch_dma_rx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return; + } + + if (dma_push_rx(priv, priv->trigger_level)) + tty_flip_buffer_push(tty); + + tty_kref_put(tty); +} + +static void pch_dma_tx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + xmit->tail += sg_dma_len(&priv->sg_tx); + xmit->tail &= UART_XMIT_SIZE - 1; + port->icount.tx += sg_dma_len(&priv->sg_tx); + + async_tx_ack(priv->desc_tx); + priv->tx_dma_use = 0; +} + +static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) +{ + int count = 0; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) + goto pop_tx_end; + + do { + int cnt_to_end = + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + int sz = min(size - count, cnt_to_end); + memcpy(&buf[count], &xmit->buf[xmit->tail], sz); + xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); + count += sz; + } while (!uart_circ_empty(xmit) && count < size); + +pop_tx_end: + pr_debug("%d characters. Remained %d characters. (%lu)\n", + count, size - count, jiffies); + + return count; +} + +static int handle_rx_to(struct eg20t_port *priv) +{ + struct pch_uart_buffer *buf; + int rx_size; + int ret; + if (!priv->start_rx) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + return 0; + } + buf = &priv->rxbuf; + do { + rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); + ret = push_rx(priv, buf->buf, rx_size); + if (ret) + return 0; + } while (rx_size == buf->size); + + return PCH_UART_HANDLED_RX_INT; +} + +static int handle_rx(struct eg20t_port *priv) +{ + return handle_rx_to(priv); +} + +static int dma_handle_rx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + + priv = container_of(port, struct eg20t_port, port); + sg = &priv->sg_rx; + + sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ + + sg_dma_len(sg) = priv->fifo_size; + + sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), + sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & + ~PAGE_MASK); + + sg_dma_address(sg) = priv->rx_buf_dma; + + desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, + sg, 1, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT); + if (!desc) + return 0; + + priv->desc_rx = desc; + desc->callback = pch_dma_rx_complete; + desc->callback_param = priv; + desc->tx_submit(desc); + dma_async_issue_pending(priv->chan_rx); + + return PCH_UART_HANDLED_RX_INT; +} + +static unsigned int handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + int ret; + int fifo_size; + int tx_size; + int size; + int tx_empty; + + if (!priv->start_tx) { + pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (pop_tx_x(priv, xmit->buf)) { + pch_uart_hal_write(priv, xmit->buf, 1); + port->icount.tx++; + tx_empty = 0; + fifo_size--; + } + size = min(xmit->head - xmit->tail, fifo_size); + tx_size = pop_tx(priv, xmit->buf, size); + if (tx_size > 0) { + ret = pch_uart_hal_write(priv, xmit->buf, tx_size); + port->icount.tx += ret; + tx_empty = 0; + } + + priv->tx_empty = tx_empty; + + if (tx_empty) + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + + return PCH_UART_HANDLED_TX_INT; +} + +static unsigned int dma_handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = &priv->sg_tx; + int nent; + int fifo_size; + int tx_empty; + struct dma_async_tx_descriptor *desc; + + if (!priv->start_tx) { + pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (pop_tx_x(priv, xmit->buf)) { + pch_uart_hal_write(priv, xmit->buf, 1); + port->icount.tx++; + tx_empty = 0; + fifo_size--; + } + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + + priv->tx_dma_use = 1; + + sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ + + sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), + UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); + + nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); + if (!nent) { + pr_err("%s:dma_map_sg Failed\n", __func__); + return 0; + } + + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + + desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, + sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + pr_err("%s:device_prep_slave_sg Failed\n", __func__); + return 0; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); + + priv->desc_tx = desc; + desc->callback = pch_dma_tx_complete; + desc->callback_param = priv; + + desc->tx_submit(desc); + + dma_async_issue_pending(priv->chan_tx); + + return PCH_UART_HANDLED_TX_INT; +} + +static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) +{ + u8 fcr = ioread8(priv->membase + UART_FCR); + + /* Reset FIFO */ + fcr |= UART_FCR_CLEAR_RCVR; + iowrite8(fcr, priv->membase + UART_FCR); + + if (lsr & PCH_UART_LSR_ERR) + dev_err(&priv->pdev->dev, "Error data in FIFO\n"); + + if (lsr & UART_LSR_FE) + dev_err(&priv->pdev->dev, "Framing Error\n"); + + if (lsr & UART_LSR_PE) + dev_err(&priv->pdev->dev, "Parity Error\n"); + + if (lsr & UART_LSR_OE) + dev_err(&priv->pdev->dev, "Overrun Error\n"); +} + +static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) +{ + struct eg20t_port *priv = dev_id; + unsigned int handled; + u8 lsr; + int ret = 0; + unsigned int iid; + unsigned long flags; + + spin_lock_irqsave(&priv->port.lock, flags); + handled = 0; + while ((iid = pch_uart_hal_get_iid(priv)) > 1) { + switch (iid) { + case PCH_UART_IID_RLS: /* Receiver Line Status */ + lsr = pch_uart_hal_get_line_status(priv); + if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE)) { + pch_uart_err_ir(priv, lsr); + ret = PCH_UART_HANDLED_RX_ERR_INT; + } + break; + case PCH_UART_IID_RDR: /* Received Data Ready */ + if (priv->use_dma) + ret = dma_handle_rx(priv); + else + ret = handle_rx(priv); + break; + case PCH_UART_IID_RDR_TO: /* Received Data Ready + (FIFO Timeout) */ + ret = handle_rx_to(priv); + break; + case PCH_UART_IID_THRE: /* Transmitter Holding Register + Empty */ + if (priv->use_dma) + ret = dma_handle_tx(priv); + else + ret = handle_tx(priv); + break; + case PCH_UART_IID_MS: /* Modem Status */ + ret = PCH_UART_HANDLED_MS_INT; + break; + default: /* Never junp to this label */ + pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); + ret = -1; + break; + } + handled |= (unsigned int)ret; + } + if (handled == 0 && iid <= 1) { + if (priv->int_dis_flag) + priv->int_dis_flag = 0; + } + + spin_unlock_irqrestore(&priv->port.lock, flags); + return IRQ_RETVAL(handled); +} + +/* This function tests whether the transmitter fifo and shifter for the port + described by 'port' is empty. */ +static unsigned int pch_uart_tx_empty(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + priv = container_of(port, struct eg20t_port, port); + if (priv->tx_empty) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* Returns the current state of modem control inputs. */ +static unsigned int pch_uart_get_mctrl(struct uart_port *port) +{ + struct eg20t_port *priv; + u8 modem; + unsigned int ret = 0; + + priv = container_of(port, struct eg20t_port, port); + modem = pch_uart_hal_get_modem(priv); + + if (modem & UART_MSR_DCD) + ret |= TIOCM_CAR; + + if (modem & UART_MSR_RI) + ret |= TIOCM_RNG; + + if (modem & UART_MSR_DSR) + ret |= TIOCM_DSR; + + if (modem & UART_MSR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 mcr = 0; + unsigned int dat; + struct eg20t_port *priv = container_of(port, struct eg20t_port, port); + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (mctrl) { + dat = pch_uart_get_mctrl(port); + dat |= mcr; + iowrite8(dat, priv->membase + UART_MCR); + } +} + +static void pch_uart_stop_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_tx = 0; + priv->tx_dma_use = 0; +} + +static void pch_uart_start_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + + if (priv->use_dma) + if (priv->tx_dma_use) + return; + + priv->start_tx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static void pch_uart_stop_rx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_rx = 0; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + priv->int_dis_flag = 1; +} + +/* Enable the modem status interrupts. */ +static void pch_uart_enable_ms(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); +} + +/* Control the transmission of a break signal. */ +static void pch_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + spin_lock_irqsave(&port->lock, flags); + pch_uart_hal_set_break(priv, ctl); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Grab any interrupt resources and initialise any low level driver state. */ +static int pch_uart_startup(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + int fifo_size; + int trigger_level; + + priv = container_of(port, struct eg20t_port, port); + priv->tx_empty = 1; + port->uartclk = priv->base_baud; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + ret = pch_uart_hal_set_line(priv, default_baud, + PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, + PCH_UART_HAL_STB1); + if (ret) + return ret; + + switch (priv->fifo_size) { + case 256: + fifo_size = PCH_UART_HAL_FIFO256; + break; + case 64: + fifo_size = PCH_UART_HAL_FIFO64; + break; + case 16: + fifo_size = PCH_UART_HAL_FIFO16; + case 1: + default: + fifo_size = PCH_UART_HAL_FIFO_DIS; + break; + } + + switch (priv->trigger) { + case PCH_UART_HAL_TRIGGER1: + trigger_level = 1; + break; + case PCH_UART_HAL_TRIGGER_L: + trigger_level = priv->fifo_size / 4; + break; + case PCH_UART_HAL_TRIGGER_M: + trigger_level = priv->fifo_size / 2; + break; + case PCH_UART_HAL_TRIGGER_H: + default: + trigger_level = priv->fifo_size - (priv->fifo_size / 8); + break; + } + + priv->trigger_level = trigger_level; + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + fifo_size, priv->trigger); + if (ret < 0) + return ret; + + ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, + KBUILD_MODNAME, priv); + if (ret < 0) + return ret; + + if (priv->use_dma) + pch_request_dma(port); + + priv->start_rx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + uart_update_timeout(port, CS8, default_baud); + + return 0; +} + +static void pch_uart_shutdown(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); + if (ret) + pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + + if (priv->use_dma_flag) + pch_free_dma(port); + + free_irq(priv->port.irq, priv); +} + +/* Change the port parameters, including word length, parity, stop + *bits. Update read_status_mask and ignore_status_mask to indicate + *the types of events we are interested in receiving. */ +static void pch_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + int baud; + int rtn; + unsigned int parity, bits, stb; + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = PCH_UART_HAL_5BIT; + break; + case CS6: + bits = PCH_UART_HAL_6BIT; + break; + case CS7: + bits = PCH_UART_HAL_7BIT; + break; + default: /* CS8 */ + bits = PCH_UART_HAL_8BIT; + break; + } + if (termios->c_cflag & CSTOPB) + stb = PCH_UART_HAL_STB2; + else + stb = PCH_UART_HAL_STB1; + + if (termios->c_cflag & PARENB) { + if (!(termios->c_cflag & PARODD)) + parity = PCH_UART_HAL_PARITY_ODD; + else + parity = PCH_UART_HAL_PARITY_EVEN; + + } else { + parity = PCH_UART_HAL_PARITY_NONE; + } + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); + if (rtn) + goto out; + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + +out: + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pch_uart_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void pch_uart_release_port(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + pci_iounmap(priv->pdev, priv->membase); + pci_release_regions(priv->pdev); +} + +static int pch_uart_request_port(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + void __iomem *membase; + + priv = container_of(port, struct eg20t_port, port); + ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); + if (ret < 0) + return -EBUSY; + + membase = pci_iomap(priv->pdev, 1, 0); + if (!membase) { + pci_release_regions(priv->pdev); + return -EBUSY; + } + priv->membase = port->membase = membase; + + return 0; +} + +static void pch_uart_config_port(struct uart_port *port, int type) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (type & UART_CONFIG_TYPE) { + port->type = priv->port_type; + pch_uart_request_port(port); + } +} + +static int pch_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (serinfo->flags & UPF_LOW_LATENCY) { + pr_info("PCH UART : Use PIO Mode (without DMA)\n"); + priv->use_dma = 0; + serinfo->flags &= ~UPF_LOW_LATENCY; + } else { +#ifndef CONFIG_PCH_DMA + pr_err("%s : PCH DMA is not Loaded.\n", __func__); + return -EOPNOTSUPP; +#endif + priv->use_dma = 1; + priv->use_dma_flag = 1; + pr_info("PCH UART : Use DMA Mode\n"); + } + + return 0; +} + +static struct uart_ops pch_uart_ops = { + .tx_empty = pch_uart_tx_empty, + .set_mctrl = pch_uart_set_mctrl, + .get_mctrl = pch_uart_get_mctrl, + .stop_tx = pch_uart_stop_tx, + .start_tx = pch_uart_start_tx, + .stop_rx = pch_uart_stop_rx, + .enable_ms = pch_uart_enable_ms, + .break_ctl = pch_uart_break_ctl, + .startup = pch_uart_startup, + .shutdown = pch_uart_shutdown, + .set_termios = pch_uart_set_termios, +/* .pm = pch_uart_pm, Not supported yet */ +/* .set_wake = pch_uart_set_wake, Not supported yet */ + .type = pch_uart_type, + .release_port = pch_uart_release_port, + .request_port = pch_uart_request_port, + .config_port = pch_uart_config_port, + .verify_port = pch_uart_verify_port +}; + +static struct uart_driver pch_uart_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = PCH_UART_DRIVER_DEVICE, + .major = 0, + .minor = 0, + .nr = PCH_UART_NR, +}; + +static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, + int port_type) +{ + struct eg20t_port *priv; + int ret; + unsigned int iobase; + unsigned int mapbase; + unsigned char *rxbuf; + int fifosize, base_baud; + static int num; + + priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); + if (priv == NULL) + goto init_port_alloc_err; + + rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!rxbuf) + goto init_port_free_txbuf; + + switch (port_type) { + case PORT_UNKNOWN: + fifosize = 256; /* UART0 */ + base_baud = 1843200; /* 1.8432MHz */ + break; + case PORT_8250: + fifosize = 64; /* UART1~3 */ + base_baud = 1843200; /* 1.8432MHz */ + break; + default: + dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); + goto init_port_hal_free; + } + + iobase = pci_resource_start(pdev, 0); + mapbase = pci_resource_start(pdev, 1); + priv->mapbase = mapbase; + priv->iobase = iobase; + priv->pdev = pdev; + priv->tx_empty = 1; + priv->rxbuf.buf = rxbuf; + priv->rxbuf.size = PAGE_SIZE; + + priv->fifo_size = fifosize; + priv->base_baud = base_baud; + priv->port_type = PORT_MAX_8250 + port_type + 1; + priv->port.dev = &pdev->dev; + priv->port.iobase = iobase; + priv->port.membase = NULL; + priv->port.mapbase = mapbase; + priv->port.irq = pdev->irq; + priv->port.iotype = UPIO_PORT; + priv->port.ops = &pch_uart_ops; + priv->port.flags = UPF_BOOT_AUTOCONF; + priv->port.fifosize = fifosize; + priv->port.line = num++; + priv->trigger = PCH_UART_HAL_TRIGGER_M; + + pci_set_drvdata(pdev, priv); + pch_uart_hal_request(pdev, fifosize, base_baud); + ret = uart_add_one_port(&pch_uart_driver, &priv->port); + if (ret < 0) + goto init_port_hal_free; + + return priv; + +init_port_hal_free: + free_page((unsigned long)rxbuf); +init_port_free_txbuf: + kfree(priv); +init_port_alloc_err: + + return NULL; +} + +static void pch_uart_exit_port(struct eg20t_port *priv) +{ + uart_remove_one_port(&pch_uart_driver, &priv->port); + pci_set_drvdata(priv->pdev, NULL); + free_page((unsigned long)priv->rxbuf.buf); +} + +static void pch_uart_pci_remove(struct pci_dev *pdev) +{ + struct eg20t_port *priv; + + priv = (struct eg20t_port *)pci_get_drvdata(pdev); + pch_uart_exit_port(priv); + pci_disable_device(pdev); + kfree(priv); + return; +} +#ifdef CONFIG_PM +static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + uart_suspend_port(&pch_uart_driver, &priv->port); + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int pch_uart_pci_resume(struct pci_dev *pdev) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, + "%s-pci_enable_device failed(ret=%d) ", __func__, ret); + return ret; + } + + uart_resume_port(&pch_uart_driver, &priv->port); + + return 0; +} +#else +#define pch_uart_pci_suspend NULL +#define pch_uart_pci_resume NULL +#endif + +static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), + .driver_data = PCH_UART_8LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), + .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), + .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), + .driver_data = PCH_UART_2LINE}, + {0,}, +}; + +static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct eg20t_port *priv; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto probe_error; + + priv = pch_uart_init_port(pdev, id->driver_data); + if (!priv) { + ret = -EBUSY; + goto probe_disable_device; + } + pci_set_drvdata(pdev, priv); + + return ret; + +probe_disable_device: + pci_disable_device(pdev); +probe_error: + return ret; +} + +static struct pci_driver pch_uart_pci_driver = { + .name = "pch_uart", + .id_table = pch_uart_pci_id, + .probe = pch_uart_pci_probe, + .remove = __devexit_p(pch_uart_pci_remove), + .suspend = pch_uart_pci_suspend, + .resume = pch_uart_pci_resume, +}; + +static int __init pch_uart_module_init(void) +{ + int ret; + + /* register as UART driver */ + ret = uart_register_driver(&pch_uart_driver); + if (ret < 0) + return ret; + + /* register as PCI driver */ + ret = pci_register_driver(&pch_uart_pci_driver); + if (ret < 0) + uart_unregister_driver(&pch_uart_driver); + + return ret; +} +module_init(pch_uart_module_init); + +static void __exit pch_uart_module_exit(void) +{ + pci_unregister_driver(&pch_uart_pci_driver); + uart_unregister_driver(&pch_uart_driver); +} +module_exit(pch_uart_module_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); +module_param(default_baud, uint, S_IRUGO); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c new file mode 100644 index 0000000..5b9cde7 --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.c @@ -0,0 +1,2208 @@ +/* + * linux/drivers/serial/pmac_zilog.c + * + * Driver for PowerMac Z85c30 based ESCC cell found in the + * "macio" ASICs of various PowerMac models + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Derived from drivers/macintosh/macserial.c by Paul Mackerras + * and drivers/serial/sunzilog.c by David S. Miller + * + * Hrm... actually, I ripped most of sunzilog (Thanks David !) and + * adapted special tweaks needed for us. I don't think it's worth + * merging back those though. The DMA code still has to get in + * and once done, I expect that driver to remain fairly stable in + * the long term, unless we change the driver model again... + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * 2004-08-06 Harald Welte + * - Enable BREAK interrupt + * - Add support for sysreq + * + * TODO: - Add DMA support + * - Defer port shutdown to a few seconds after close + * - maybe put something right into uap->clk_divisor + */ + +#undef DEBUG +#undef DEBUG_HARD +#undef USE_CTRL_O_SYSRQ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_PMAC +#include +#include +#include +#include +#include +#else +#include +#define of_machine_is_compatible(x) (0) +#endif + +#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "pmac_zilog.h" + +/* Not yet implemented */ +#undef HAS_DBDMA + +static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS +#define PMACZILOG_MAJOR TTY_MAJOR +#define PMACZILOG_MINOR 64 +#define PMACZILOG_NAME "ttyS" +#else +#define PMACZILOG_MAJOR 204 +#define PMACZILOG_MINOR 192 +#define PMACZILOG_NAME "ttyPZ" +#endif + + +/* + * For the sake of early serial console, we can do a pre-probe + * (optional) of the ports at rather early boot time. + */ +static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; +static int pmz_ports_count; +static DEFINE_MUTEX(pmz_irq_mutex); + +static struct uart_driver pmz_uart_reg = { + .owner = THIS_MODULE, + .driver_name = PMACZILOG_NAME, + .dev_name = PMACZILOG_NAME, + .major = PMACZILOG_MAJOR, + .minor = PMACZILOG_MINOR, +}; + + +/* + * Load all registers to reprogram the port + * This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) +{ + int i; + + if (ZS_IS_ASLEEP(uap)) + return; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(uap, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + ZS_CLEARERR(uap); + zssync(uap); + ZS_CLEARFIFO(uap); + zssync(uap); + ZS_CLEARERR(uap); + + /* Disable all interrupts. */ + write_zsreg(uap, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(uap, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(uap, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + + /* now set R7 "prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] | EN85C30); + write_zsreg(uap, R7, regs[R7P]); + + /* make sure we use R7 "non-prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] & ~EN85C30); + + /* Synchronous mode config. */ + write_zsreg(uap, R6, regs[R6]); + write_zsreg(uap, R7, regs[R7]); + + /* Disable baud generator. */ + write_zsreg(uap, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(uap, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(uap, R12, regs[R12]); + write_zsreg(uap, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(uap, R14, regs[R14]); + + /* Reset external status interrupts. */ + write_zsreg(uap, R0, RES_EXT_INT); + write_zsreg(uap, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(uap, R3, regs[R3]); + write_zsreg(uap, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(uap, R1, regs[R1]); + + /* Enable interrupts */ + write_zsreg(uap, R9, regs[R9]); +} + +/* + * We do like sunzilog to avoid disrupting pending Tx + * Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void pmz_maybe_update_regs(struct uart_pmac_port *uap) +{ + if (!ZS_REGS_HELD(uap)) { + if (ZS_TX_ACTIVE(uap)) { + uap->flags |= PMACZILOG_FLAG_REGS_HELD; + } else { + pmz_debug("pmz: maybe_update_regs: updating\n"); + pmz_load_zsregs(uap, uap->curregs); + } + } +} + +static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) +{ + struct tty_struct *tty = NULL; + unsigned char ch, r1, drop, error, flag; + int loops = 0; + + /* The interrupt can be enabled when the port isn't open, typically + * that happens when using one port is open and the other closed (stale + * interrupt) or when one port is used as a console. + */ + if (!ZS_IS_OPEN(uap)) { + pmz_debug("pmz: draining input\n"); + /* Port is closed, drain input data */ + for (;;) { + if ((++loops) > 1000) + goto flood; + (void)read_zsreg(uap, R1); + write_zsreg(uap, R0, ERR_RES); + (void)read_zsdata(uap); + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + return NULL; + } + + /* Sanity check, make sure the old bug is no longer happening */ + if (uap->port.state == NULL || uap->port.state->port.tty == NULL) { + WARN_ON(1); + (void)read_zsdata(uap); + return NULL; + } + tty = uap->port.state->port.tty; + + while (1) { + error = 0; + drop = 0; + + r1 = read_zsreg(uap, R1); + ch = read_zsdata(uap); + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + write_zsreg(uap, R0, ERR_RES); + zssync(uap); + } + + ch &= uap->parity_mask; + if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { + uap->flags &= ~PMACZILOG_FLAG_BREAK; + } + +#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) +#ifdef USE_CTRL_O_SYSRQ + /* Handle the SysRq ^O Hack */ + if (ch == '\x0f') { + uap->port.sysrq = jiffies + HZ*5; + goto next_char; + } +#endif /* USE_CTRL_O_SYSRQ */ + if (uap->port.sysrq) { + int swallow; + spin_unlock(&uap->port.lock); + swallow = uart_handle_sysrq_char(&uap->port, ch); + spin_lock(&uap->port.lock); + if (swallow) + goto next_char; + } +#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ + + /* A real serial line, record the character and status. */ + if (drop) + goto next_char; + + flag = TTY_NORMAL; + uap->port.icount.rx++; + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { + error = 1; + if (r1 & BRK_ABRT) { + pmz_debug("pmz: got break !\n"); + r1 &= ~(PAR_ERR | CRC_ERR); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto next_char; + } + else if (r1 & PAR_ERR) + uap->port.icount.parity++; + else if (r1 & CRC_ERR) + uap->port.icount.frame++; + if (r1 & Rx_OVR) + uap->port.icount.overrun++; + r1 &= uap->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uap->port.ignore_status_mask == 0xff || + (r1 & uap->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + next_char: + /* We can get stuck in an infinite loop getting char 0 when the + * line is in a wrong HW state, we break that here. + * When that happens, I disable the receive side of the driver. + * Note that what I've been experiencing is a real irq loop where + * I'm getting flooded regardless of the actual port speed. + * Something stange is going on with the HW + */ + if ((++loops) > 1000) + goto flood; + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + + return tty; + flood: + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + pmz_error("pmz: rx irq flood !\n"); + return tty; +} + +static void pmz_status_handle(struct uart_pmac_port *uap) +{ + unsigned char status; + + status = read_zsreg(uap, R0); + write_zsreg(uap, R0, RES_EXT_INT); + zssync(uap); + + if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { + if (status & SYNC_HUNT) + uap->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + * The CTS input is inverted for some reason. -- paulus + */ + if ((status ^ uap->prev_status) & DCD) + uart_handle_dcd_change(&uap->port, + (status & DCD)); + if ((status ^ uap->prev_status) & CTS) + uart_handle_cts_change(&uap->port, + !(status & CTS)); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); + } + + if (status & BRK_ABRT) + uap->flags |= PMACZILOG_FLAG_BREAK; + + uap->prev_status = status; +} + +static void pmz_transmit_chars(struct uart_pmac_port *uap) +{ + struct circ_buf *xmit; + + if (ZS_IS_ASLEEP(uap)) + return; + if (ZS_IS_CONS(uap)) { + unsigned char status = read_zsreg(uap, R0); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(uap)) { + pmz_load_zsregs(uap, uap->curregs); + uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(uap)) { + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + + if (uap->port.x_char) { + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, uap->port.x_char); + zssync(uap); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + + if (uap->port.state == NULL) + goto ack_tx_int; + xmit = &uap->port.state->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&uap->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&uap->port)) + goto ack_tx_int; + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return; + +ack_tx_int: + write_zsreg(uap, R0, RES_Tx_P); + zssync(uap); +} + +/* Hrm... we register that twice, fixme later.... */ +static irqreturn_t pmz_interrupt(int irq, void *dev_id) +{ + struct uart_pmac_port *uap = dev_id; + struct uart_pmac_port *uap_a; + struct uart_pmac_port *uap_b; + int rc = IRQ_NONE; + struct tty_struct *tty; + u8 r3; + + uap_a = pmz_get_port_A(uap); + uap_b = uap_a->mate; + + spin_lock(&uap_a->port.lock); + r3 = read_zsreg(uap_a, R3); + +#ifdef DEBUG_HARD + pmz_debug("irq, r3: %x\n", r3); +#endif + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + write_zsreg(uap_a, R0, RES_H_IUS); + zssync(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); + if (r3 & CHARxIP) + tty = pmz_receive_chars(uap_a); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + if (uap_b->node == NULL) + goto out; + + spin_lock(&uap_b->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + write_zsreg(uap_b, R0, RES_H_IUS); + zssync(uap_b); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + out: +#ifdef DEBUG_HARD + pmz_debug("irq done.\n"); +#endif + return rc; +} + +/* + * Peek the status register, lock not held by caller + */ +static inline u8 pmz_peek_status(struct uart_pmac_port *uap) +{ + unsigned long flags; + u8 status; + + spin_lock_irqsave(&uap->port.lock, flags); + status = read_zsreg(uap, R0); + spin_unlock_irqrestore(&uap->port.lock, flags); + + return status; +} + +/* + * Check if transmitter is empty + * The port lock is not held. + */ +static unsigned int pmz_tx_empty(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return TIOCSER_TEMT; + + status = pmz_peek_status(to_pmz(port)); + if (status & Tx_BUF_EMP) + return TIOCSER_TEMT; + return 0; +} + +/* + * Set Modem Control (RTS & DTR) bits + * The port lock is held and interrupts are disabled. + * Note: Shall we really filter out RTS on external ports or + * should that be dealt at higher level only ? + */ +static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits; + + /* Do nothing for irda for now... */ + if (ZS_IS_IRDA(uap)) + return; + /* We get called during boot with a port not up yet */ + if (ZS_IS_ASLEEP(uap) || + !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) + return; + + set_bits = clear_bits = 0; + + if (ZS_IS_INTMODEM(uap)) { + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + } + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + uap->curregs[R5] |= set_bits; + uap->curregs[R5] &= ~clear_bits; + if (ZS_IS_ASLEEP(uap)) + return; + write_zsreg(uap, R5, uap->curregs[R5]); + pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", + set_bits, clear_bits, uap->curregs[R5]); + zssync(uap); +} + +/* + * Get Modem Control bits (only the input ones, the core will + * or that with a cached value of the control ones) + * The port lock is held and interrupts are disabled. + */ +static unsigned int pmz_get_mctrl(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + unsigned int ret; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return 0; + + status = read_zsreg(uap, R0); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC_HUNT) + ret |= TIOCM_DSR; + if (!(status & CTS)) + ret |= TIOCM_CTS; + + return ret; +} + +/* + * Stop TX side. Dealt like sunzilog at next Tx interrupt, + * though for DMA, we will have to do a bit more. + * The port lock is held and interrupts are disabled. + */ +static void pmz_stop_tx(struct uart_port *port) +{ + to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; +} + +/* + * Kick the Tx side. + * The port lock is held and interrupts are disabled. + */ +static void pmz_start_tx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + pmz_debug("pmz: start_tx()\n"); + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + status = read_zsreg(uap, R0); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + write_zsdata(uap, port->x_char); + zssync(uap); + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + } + pmz_debug("pmz: start_tx() done.\n"); +} + +/* + * Stop Rx side, basically disable emitting of + * Rx interrupts on the port. We don't disable the rx + * side of the chip proper though + * The port lock is held. + */ +static void pmz_stop_rx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + pmz_debug("pmz: stop_rx()()\n"); + + /* Disable all RX interrupts. */ + uap->curregs[R1] &= ~RxINT_MASK; + pmz_maybe_update_regs(uap); + + pmz_debug("pmz: stop_rx() done.\n"); +} + +/* + * Enable modem status change interrupts + * The port lock is held. + */ +static void pmz_enable_ms(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char new_reg; + + if (ZS_IS_IRDA(uap) || uap->node == NULL) + return; + new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != uap->curregs[R15]) { + uap->curregs[R15] = new_reg; + + if (ZS_IS_ASLEEP(uap)) + return; + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(uap, R15, uap->curregs[R15]); + } +} + +/* + * Control break state emission + * The port lock is not held. + */ +static void pmz_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + if (uap->node == NULL) + return; + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != uap->curregs[R5]) { + uap->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); + return; + } + write_zsreg(uap, R5, uap->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +#ifdef CONFIG_PPC_PMAC + +/* + * Turn power on or off to the SCC and associated stuff + * (port drivers, modem, IR port, etc.) + * Returns the number of milliseconds we should wait before + * trying to use the port. + */ +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + int delay = 0; + int rc; + + if (state) { + rc = pmac_call_feature( + PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); + pmz_debug("port power on result: %d\n", rc); + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); + delay = 2500; /* wait for 2.5s before using */ + pmz_debug("modem power result: %d\n", rc); + } + } else { + /* TODO: Make that depend on a timer, don't power down + * immediately + */ + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); + pmz_debug("port power off result: %d\n", rc); + } + pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); + } + return delay; +} + +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +/* + * FixZeroBug....Works around a bug in the SCC receving channel. + * Inspired from Darwin code, 15 Sept. 2000 -DanM + * + * The following sequence prevents a problem that is seen with O'Hare ASICs + * (most versions -- also with some Heathrow and Hydra ASICs) where a zero + * at the input to the receiver becomes 'stuck' and locks up the receiver. + * This problem can occur as a result of a zero bit at the receiver input + * coincident with any of the following events: + * + * The SCC is initialized (hardware or software). + * A framing error is detected. + * The clocking option changes from synchronous or X1 asynchronous + * clocking to X16, X32, or X64 asynchronous clocking. + * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. + * + * This workaround attempts to recover from the lockup condition by placing + * the SCC in synchronous loopback mode with a fast clock before programming + * any of the asynchronous modes. + */ +static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) +{ + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); + zssync(uap); + + write_zsreg(uap, 4, X1CLK | MONSYNC); + write_zsreg(uap, 3, Rx8); + write_zsreg(uap, 5, Tx8 | RTS); + write_zsreg(uap, 9, NV); /* Didn't we already do this? */ + write_zsreg(uap, 11, RCBR | TCBR); + write_zsreg(uap, 12, 0); + write_zsreg(uap, 13, 0); + write_zsreg(uap, 14, (LOOPBAK | BRSRC)); + write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); + write_zsreg(uap, 3, Rx8 | RxENABLE); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ + + /* The channel should be OK now, but it is probably receiving + * loopback garbage. + * Switch to asynchronous mode, disable the receiver, + * and discard everything in the receive buffer. + */ + write_zsreg(uap, 9, NV); + write_zsreg(uap, 4, X16CLK | SB_MASK); + write_zsreg(uap, 3, Rx8); + + while (read_zsreg(uap, 0) & Rx_CH_AV) { + (void)read_zsreg(uap, 8); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, ERR_RES); + } +} + +/* + * Real startup routine, powers up the hardware and sets up + * the SCC. Returns a delay in ms where you need to wait before + * actually using the port, this is typically the internal modem + * powerup delay. This routine expect the lock to be taken. + */ +static int __pmz_startup(struct uart_pmac_port *uap) +{ + int pwr_delay = 0; + + memset(&uap->curregs, 0, sizeof(uap->curregs)); + + /* Power up the SCC & underlying hardware (modem/irda) */ + pwr_delay = pmz_set_scc_power(uap, 1); + + /* Nice buggy HW ... */ + pmz_fix_zero_bug_scc(uap); + + /* Reset the channel */ + uap->curregs[R9] = 0; + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, 0); + zssync(uap); + + /* Clear the interrupt registers */ + write_zsreg(uap, R1, 0); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, RES_H_IUS); + write_zsreg(uap, R0, RES_H_IUS); + + /* Setup some valid baud rate */ + uap->curregs[R4] = X16CLK | SB1; + uap->curregs[R3] = Rx8; + uap->curregs[R5] = Tx8 | RTS; + if (!ZS_IS_IRDA(uap)) + uap->curregs[R5] |= DTR; + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->curregs[R14] = BRENAB; + + /* Clear handshaking, enable BREAK interrupts */ + uap->curregs[R15] = BRKIE; + + /* Master interrupt enable */ + uap->curregs[R9] |= NV | MIE; + + pmz_load_zsregs(uap, uap->curregs); + + /* Enable receiver and transmitter. */ + write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); + write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); + + /* Remember status for DCD/CTS changes */ + uap->prev_status = read_zsreg(uap, R0); + + return pwr_delay; +} + +static void pmz_irda_reset(struct uart_pmac_port *uap) +{ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(110); + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(10); +} + +/* + * This is the "normal" startup routine, using the above one + * wrapped with the lock and doing a schedule delay + */ +static int pmz_startup(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + int pwr_delay = 0; + + pmz_debug("pmz: startup()\n"); + + if (ZS_IS_ASLEEP(uap)) + return -EAGAIN; + if (uap->node == NULL) + return -ENODEV; + + mutex_lock(&pmz_irq_mutex); + + uap->flags |= PMACZILOG_FLAG_IS_OPEN; + + /* A console is never powered down. Else, power up and + * initialize the chip + */ + if (!ZS_IS_CONS(uap)) { + spin_lock_irqsave(&port->lock, flags); + pwr_delay = __pmz_startup(uap); + spin_unlock_irqrestore(&port->lock, flags); + } + + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + "SCC", uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); + pmz_set_scc_power(uap, 0); + mutex_unlock(&pmz_irq_mutex); + return -ENXIO; + } + + mutex_unlock(&pmz_irq_mutex); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + /* IrDA reset is done now */ + if (ZS_IS_IRDA(uap)) + pmz_irda_reset(uap); + + /* Enable interrupts emission from the chip */ + spin_lock_irqsave(&port->lock, flags); + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + spin_unlock_irqrestore(&port->lock, flags); + + pmz_debug("pmz: startup() done.\n"); + + return 0; +} + +static void pmz_shutdown(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + pmz_debug("pmz: shutdown()\n"); + + if (uap->node == NULL) + return; + + mutex_lock(&pmz_irq_mutex); + + /* Release interrupt handler */ + free_irq(uap->port.irq, uap); + + spin_lock_irqsave(&port->lock, flags); + + uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; + + if (!ZS_IS_OPEN(uap->mate)) + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + + /* Disable interrupts */ + if (!ZS_IS_ASLEEP(uap)) { + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + } + + if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); + mutex_unlock(&pmz_irq_mutex); + return; + } + + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R5] &= ~SND_BRK; + pmz_maybe_update_regs(uap); + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + spin_unlock_irqrestore(&port->lock, flags); + + mutex_unlock(&pmz_irq_mutex); + + pmz_debug("pmz: shutdown() done.\n"); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, + unsigned int iflag, unsigned long baud) +{ + int brg; + + /* Switch to external clocking for IrDA high clock rates. That + * code could be re-used for Midi interfaces with different + * multipliers + */ + if (baud >= 115200 && ZS_IS_IRDA(uap)) { + uap->curregs[R4] = X1CLK; + uap->curregs[R11] = RCTRxCP | TCTRxCP; + uap->curregs[R14] = 0; /* BRG off */ + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; + } else { + switch (baud) { + case ZS_CLOCK/16: /* 230400 */ + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + uap->curregs[R4] = X32CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + default: + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); + uap->curregs[R12] = (brg & 255); + uap->curregs[R13] = ((brg >> 8) & 255); + uap->curregs[R14] = BRENAB; + } + uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; + } + + /* Character size, stop bits, and parity. */ + uap->curregs[3] &= ~RxN_MASK; + uap->curregs[5] &= ~TxN_MASK; + + switch (cflag & CSIZE) { + case CS5: + uap->curregs[3] |= Rx5; + uap->curregs[5] |= Tx5; + uap->parity_mask = 0x1f; + break; + case CS6: + uap->curregs[3] |= Rx6; + uap->curregs[5] |= Tx6; + uap->parity_mask = 0x3f; + break; + case CS7: + uap->curregs[3] |= Rx7; + uap->curregs[5] |= Tx7; + uap->parity_mask = 0x7f; + break; + case CS8: + default: + uap->curregs[3] |= Rx8; + uap->curregs[5] |= Tx8; + uap->parity_mask = 0xff; + break; + }; + uap->curregs[4] &= ~(SB_MASK); + if (cflag & CSTOPB) + uap->curregs[4] |= SB2; + else + uap->curregs[4] |= SB1; + if (cflag & PARENB) + uap->curregs[4] |= PAR_ENAB; + else + uap->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + uap->curregs[4] |= PAR_EVEN; + else + uap->curregs[4] &= ~PAR_EVEN; + + uap->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + uap->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + uap->port.read_status_mask |= BRK_ABRT; + + uap->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + uap->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + uap->port.ignore_status_mask = 0xff; +} + + +/* + * Set the irda codec on the imac to the specified baud rate. + */ +static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) +{ + u8 cmdbyte; + int t, version; + + switch (*baud) { + /* SIR modes */ + case 2400: + cmdbyte = 0x53; + break; + case 4800: + cmdbyte = 0x52; + break; + case 9600: + cmdbyte = 0x51; + break; + case 19200: + cmdbyte = 0x50; + break; + case 38400: + cmdbyte = 0x4f; + break; + case 57600: + cmdbyte = 0x4e; + break; + case 115200: + cmdbyte = 0x4d; + break; + /* The FIR modes aren't really supported at this point, how + * do we select the speed ? via the FCR on KeyLargo ? + */ + case 1152000: + cmdbyte = 0; + break; + case 4000000: + cmdbyte = 0; + break; + default: /* 9600 */ + cmdbyte = 0x51; + *baud = 9600; + break; + } + + /* Wait for transmitter to drain */ + t = 10000; + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 + || (read_zsreg(uap, R1) & ALL_SNT) == 0) { + if (--t <= 0) { + pmz_error("transmitter didn't drain\n"); + return; + } + udelay(10); + } + + /* Drain the receiver too */ + t = 100; + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + mdelay(10); + while (read_zsreg(uap, R0) & Rx_CH_AV) { + read_zsdata(uap); + mdelay(10); + if (--t <= 0) { + pmz_error("receiver didn't drain\n"); + return; + } + } + + /* Switch to command mode */ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(1); + + /* Switch SCC to 19200 */ + pmz_convert_to_zs(uap, CS8, 0, 19200); + pmz_load_zsregs(uap, uap->curregs); + mdelay(1); + + /* Write get_version command byte */ + write_zsdata(uap, 1); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on get_version byte\n"); + goto out; + } + udelay(10); + } + version = read_zsdata(uap); + + if (version < 4) { + pmz_info("IrDA: dongle version %d not supported\n", version); + goto out; + } + + /* Send speed mode */ + write_zsdata(uap, cmdbyte); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on speed mode byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(uap); + if (t != cmdbyte) + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", + *baud, version); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + + out: + /* Switch back to data mode */ + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); +} + + +static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long baud; + + pmz_debug("pmz: set_termios()\n"); + + if (ZS_IS_ASLEEP(uap)) + return; + + memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); + + /* XXX Check which revs of machines actually allow 1 and 4Mb speeds + * on the IR dongle. Note that the IRTTY driver currently doesn't know + * about the FIR mode and high speed modes. So these are unused. For + * implementing proper support for these, we should probably add some + * DMA as well, at least on the Rx side, which isn't a simple thing + * at this point. + */ + if (ZS_IS_IRDA(uap)) { + /* Calc baud rate */ + baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); + pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); + /* Cet the irda codec to the right rate */ + pmz_irda_setup(uap, &baud); + /* Set final baud rate */ + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + pmz_load_zsregs(uap, uap->curregs); + zssync(uap); + } else { + baud = uart_get_baud_rate(port, termios, old, 1200, 230400); + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + /* Make sure modem status interrupts are correctly configured */ + if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { + uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; + uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; + } else { + uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); + uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; + } + + /* Load registers to the chip */ + pmz_maybe_update_regs(uap); + } + uart_update_timeout(port, termios->c_cflag, baud); + + pmz_debug("pmz: set_termios() done.\n"); +} + +/* The port lock is not held. */ +static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable IRQs on the port */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + + /* Setup new port configuration */ + __pmz_set_termios(port, termios, old); + + /* Re-enable IRQs on the port */ + if (ZS_IS_OPEN(uap)) { + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pmz_type(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_IRDA(uap)) + return "Z85c30 ESCC - Infrared port"; + else if (ZS_IS_INTMODEM(uap)) + return "Z85c30 ESCC - Internal modem"; + return "Z85c30 ESCC - Serial port"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void pmz_release_port(struct uart_port *port) +{ +} + +static int pmz_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void pmz_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL + +static int pmz_poll_get_char(struct uart_port *port) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) + udelay(5); + return read_zsdata(uap); +} + +static void pmz_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops pmz_pops = { + .tx_empty = pmz_tx_empty, + .set_mctrl = pmz_set_mctrl, + .get_mctrl = pmz_get_mctrl, + .stop_tx = pmz_stop_tx, + .start_tx = pmz_start_tx, + .stop_rx = pmz_stop_rx, + .enable_ms = pmz_enable_ms, + .break_ctl = pmz_break_ctl, + .startup = pmz_startup, + .shutdown = pmz_shutdown, + .set_termios = pmz_set_termios, + .type = pmz_type, + .release_port = pmz_release_port, + .request_port = pmz_request_port, + .config_port = pmz_config_port, + .verify_port = pmz_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pmz_poll_get_char, + .poll_put_char = pmz_poll_put_char, +#endif +}; + +#ifdef CONFIG_PPC_PMAC + +/* + * Setup one port structure after probing, HW is down at this point, + * Unlike sunzilog, we don't need to pre-init the spinlock as we don't + * register our console before uart_add_one_port() is called + */ +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct device_node *np = uap->node; + const char *conn; + const struct slot_names_prop { + int count; + char name[1]; + } *slots; + int len; + struct resource r_ports, r_rxdma, r_txdma; + + /* + * Request & map chip registers + */ + if (of_address_to_resource(np, 0, &r_ports)) + return -ENODEV; + uap->port.mapbase = r_ports.start; + uap->port.membase = ioremap(uap->port.mapbase, 0x1000); + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 0x10; + + /* + * Request & map DBDMA registers + */ +#ifdef HAS_DBDMA + if (of_address_to_resource(np, 1, &r_txdma) == 0 && + of_address_to_resource(np, 2, &r_rxdma) == 0) + uap->flags |= PMACZILOG_FLAG_HAS_DMA; +#else + memset(&r_txdma, 0, sizeof(struct resource)); + memset(&r_rxdma, 0, sizeof(struct resource)); +#endif + if (ZS_HAS_DMA(uap)) { + uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); + if (uap->tx_dma_regs == NULL) { + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); + if (uap->rx_dma_regs == NULL) { + iounmap(uap->tx_dma_regs); + uap->tx_dma_regs = NULL; + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->tx_dma_irq = irq_of_parse_and_map(np, 1); + uap->rx_dma_irq = irq_of_parse_and_map(np, 2); + } +no_dma: + + /* + * Detect port type + */ + if (of_device_is_compatible(np, "cobalt")) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + conn = of_get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + uap->port_type = PMAC_SCC_ASYNC; + /* 1999 Powerbook G3 has slot-names property instead */ + slots = of_get_property(np, "slot-names", &len); + if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + } + if (ZS_IS_IRDA(uap)) + uap->port_type = PMAC_SCC_IRDA; + if (ZS_IS_INTMODEM(uap)) { + struct device_node* i2c_modem = + of_find_node_by_name(NULL, "i2c-modem"); + if (i2c_modem) { + const char* mid = + of_get_property(i2c_modem, "modem-id", NULL); + if (mid) switch(*mid) { + case 0x04 : + case 0x05 : + case 0x07 : + case 0x08 : + case 0x0b : + case 0x0c : + uap->port_type = PMAC_SCC_I2S1; + } + printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", + mid ? (*mid) : 0); + of_node_put(i2c_modem); + } else { + printk(KERN_INFO "pmac_zilog: serial modem detected\n"); + } + } + + /* + * Init remaining bits of "port" structure + */ + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq_of_parse_and_map(np, 0); + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + /* + * Fixup for the port on Gatwick for which the device-tree has + * missing interrupts. Normally, the macio_dev would contain + * fixed up interrupt info, but we use the device-tree directly + * here due to early probing so we need the fixup too. + */ + if (uap->port.irq == NO_IRQ && + np->parent && np->parent->parent && + of_device_is_compatible(np->parent->parent, "gatwick")) { + /* IRQs on gatwick are offset by 64 */ + uap->port.irq = irq_create_mapping(NULL, 64 + 15); + uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); + uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); + } + + /* Setup some valid baud rate information in the register + * shadows so we don't write crap there before baud rate is + * first initialized. + */ + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +/* + * Get rid of a port on module removal + */ +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + struct device_node *np; + + np = uap->node; + iounmap(uap->rx_dma_regs); + iounmap(uap->tx_dma_regs); + iounmap(uap->control_reg); + uap->node = NULL; + of_node_put(np); + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +/* + * Called upon match with an escc node in the device-tree. + */ +static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + int i; + + /* Iterate the pmz_ports array to find a matching entry + */ + for (i = 0; i < MAX_ZS_PORTS; i++) + if (pmz_ports[i].node == mdev->ofdev.dev.of_node) { + struct uart_pmac_port *uap = &pmz_ports[i]; + + uap->dev = mdev; + dev_set_drvdata(&mdev->ofdev.dev, uap); + if (macio_request_resources(uap->dev, "pmac_zilog")) + printk(KERN_WARNING "%s: Failed to request resource" + ", port still active\n", + uap->node->name); + else + uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; + return 0; + } + return -ENODEV; +} + +/* + * That one should not be called, macio isn't really a hotswap device, + * we don't expect one of those serial ports to go away... + */ +static int pmz_detach(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (!uap) + return -ENODEV; + + if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { + macio_release_resources(uap->dev); + uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; + } + dev_set_drvdata(&mdev->ofdev.dev, NULL); + uap->dev = NULL; + + return 0; +} + + +static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + + if (uap == NULL) { + printk("HRM... pmz_suspend with NULL uap\n"); + return 0; + } + + if (pm_state.event == mdev->ofdev.dev.power.power_state.event) + return 0; + + pmz_debug("suspend, switching to state %d\n", pm_state.event); + + state = pmz_uart_reg.state + uap->port.line; + + mutex_lock(&pmz_irq_mutex); + mutex_lock(&state->port.mutex); + + spin_lock_irqsave(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) { + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + uap->curregs[R5] &= ~SND_BRK; + pmz_load_zsregs(uap, uap->curregs); + uap->flags |= PMACZILOG_FLAG_IS_ASLEEP; + mb(); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate)) + if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + disable_irq(uap->port.irq); + } + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags &= ~CON_ENABLED; + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + mutex_unlock(&state->port.mutex); + mutex_unlock(&pmz_irq_mutex); + + pmz_debug("suspend, switching complete\n"); + + mdev->ofdev.dev.power.power_state = pm_state; + + return 0; +} + + +static int pmz_resume(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + int pwr_delay = 0; + + if (uap == NULL) + return 0; + + if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) + return 0; + + pmz_debug("resume, switching to state 0\n"); + + state = pmz_uart_reg.state + uap->port.line; + + mutex_lock(&pmz_irq_mutex); + mutex_lock(&state->port.mutex); + + spin_lock_irqsave(&uap->port.lock, flags); + if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { + spin_unlock_irqrestore(&uap->port.lock, flags); + goto bail; + } + pwr_delay = __pmz_startup(uap); + + /* Take care of config that may have changed while asleep */ + __pmz_set_termios(&uap->port, &uap->termios_cache, NULL); + + if (ZS_IS_OPEN(uap)) { + /* Enable interrupts */ + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags |= CON_ENABLED; + + /* Re-enable IRQ on the controller */ + if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + enable_irq(uap->port.irq); + } + + bail: + mutex_unlock(&state->port.mutex); + mutex_unlock(&pmz_irq_mutex); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + pmz_debug("resume, switching complete\n"); + + mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; + + return 0; +} + +/* + * Probe all ports in the system and build the ports array, we register + * with the serial layer at this point, the macio-type probing is only + * used later to "attach" to the sysfs tree so we get power management + * events + */ +static int __init pmz_probe(void) +{ + struct device_node *node_p, *node_a, *node_b, *np; + int count = 0; + int rc; + + /* + * Find all escc chips in the system + */ + node_p = of_find_node_by_name(NULL, "escc"); + while (node_p) { + /* + * First get channel A/B node pointers + * + * TODO: Add routines with proper locking to do that... + */ + node_a = node_b = NULL; + for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) { + if (strncmp(np->name, "ch-a", 4) == 0) + node_a = of_node_get(np); + else if (strncmp(np->name, "ch-b", 4) == 0) + node_b = of_node_get(np); + } + if (!node_a && !node_b) { + of_node_put(node_a); + of_node_put(node_b); + printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", + (!node_a) ? 'a' : 'b', node_p->full_name); + goto next; + } + + /* + * Fill basic fields in the port structures + */ + pmz_ports[count].mate = &pmz_ports[count+1]; + pmz_ports[count+1].mate = &pmz_ports[count]; + pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[count].node = node_a; + pmz_ports[count+1].node = node_b; + pmz_ports[count].port.line = count; + pmz_ports[count+1].port.line = count+1; + + /* + * Setup the ports for real + */ + rc = pmz_init_port(&pmz_ports[count]); + if (rc == 0 && node_b != NULL) + rc = pmz_init_port(&pmz_ports[count+1]); + if (rc != 0) { + of_node_put(node_a); + of_node_put(node_b); + memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); + memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); + goto next; + } + count += 2; +next: + node_p = of_find_node_by_name(node_p, "escc"); + } + pmz_ports_count = count; + + return 0; +} + +#else + +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports; + int irq; + + r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); + irq = platform_get_irq(uap->node, 0); + if (!r_ports || !irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].node = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].node = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].node == pdev) + return 0; + return -ENODEV; +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_write(struct console *con, const char *s, unsigned int count); +static int __init pmz_console_setup(struct console *co, char *options); + +static struct console pmz_console = { + .name = PMACZILOG_NAME, + .write = pmz_console_write, + .device = uart_console_device, + .setup = pmz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pmz_uart_reg, +}; + +#define PMACZILOG_CONSOLE &pmz_console +#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ +#define PMACZILOG_CONSOLE (NULL) +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +/* + * Register the driver, console driver and ports with the serial + * core + */ +static int __init pmz_register(void) +{ + int i, rc; + + pmz_uart_reg.nr = pmz_ports_count; + pmz_uart_reg.cons = PMACZILOG_CONSOLE; + + /* + * Register this driver with the serial core + */ + rc = uart_register_driver(&pmz_uart_reg); + if (rc) + return rc; + + /* + * Register each port with the serial core + */ + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + /* NULL node may happen on wallstreet */ + if (uport->node != NULL) + rc = uart_add_one_port(&pmz_uart_reg, &uport->port); + if (rc) + goto err_out; + } + + return 0; +err_out: + while (i-- > 0) { + struct uart_pmac_port *uport = &pmz_ports[i]; + uart_remove_one_port(&pmz_uart_reg, &uport->port); + } + uart_unregister_driver(&pmz_uart_reg); + return rc; +} + +#ifdef CONFIG_PPC_PMAC + +static struct of_device_id pmz_match[] = +{ + { + .name = "ch-a", + }, + { + .name = "ch-b", + }, + {}, +}; +MODULE_DEVICE_TABLE (of, pmz_match); + +static struct macio_driver pmz_driver = { + .driver = { + .name = "pmac_zilog", + .owner = THIS_MODULE, + .of_match_table = pmz_match, + }, + .probe = pmz_attach, + .remove = pmz_detach, + .suspend = pmz_suspend, + .resume = pmz_resume, +}; + +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + .owner = THIS_MODULE, + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + +static int __init init_pmz(void) +{ + int rc, i; + printk(KERN_INFO "%s\n", version); + + /* + * First, we need to do a direct OF-based probe pass. We + * do that because we want serial console up before the + * macio stuffs calls us back, and since that makes it + * easier to pass the proper number of channels to + * uart_register_driver() + */ + if (pmz_ports_count == 0) + pmz_probe(); + + /* + * Bail early if no port found + */ + if (pmz_ports_count == 0) + return -ENODEV; + + /* + * Now we register with the serial layer + */ + rc = pmz_register(); + if (rc) { + printk(KERN_ERR + "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" + "pmac_zilog: Did another serial driver already claim the minors?\n"); + /* effectively "pmz_unprobe()" */ + for (i=0; i < pmz_ports_count; i++) + pmz_dispose_port(&pmz_ports[i]); + return rc; + } + + /* + * Then we register the macio driver itself + */ +#ifdef CONFIG_PPC_PMAC + return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif +} + +static void __exit exit_pmz(void) +{ + int i; + +#ifdef CONFIG_PPC_PMAC + /* Get rid of macio-driver (detach from macio) */ + macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif + + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + if (uport->node != NULL) { + uart_remove_one_port(&pmz_uart_reg, &uport->port); + pmz_dispose_port(uport); + } + } + /* Unregister UART driver */ + uart_unregister_driver(&pmz_uart_reg); +} + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void pmz_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_pmac_port *uap = &pmz_ports[con->index]; + unsigned long flags; + + if (ZS_IS_ASLEEP(uap)) + return; + spin_lock_irqsave(&uap->port.lock, flags); + + /* Turn of interrupts and enable the transmitter. */ + write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); + write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); + + uart_console_write(&uap->port, s, count, pmz_console_putchar); + + /* Restore the values in the registers. */ + write_zsreg(uap, R1, uap->curregs[1]); + /* Don't disable the transmitter. */ + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Setup the serial console + */ +static int __init pmz_console_setup(struct console *co, char *options) +{ + struct uart_pmac_port *uap; + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + unsigned long pwr_delay; + + /* + * XServe's default to 57600 bps + */ + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= pmz_ports_count) + co->index = 0; + uap = &pmz_ports[co->index]; + if (uap->node == NULL) + return -ENODEV; + port = &uap->port; + + /* + * Mark port as beeing a console + */ + uap->flags |= PMACZILOG_FLAG_IS_CONS; + + /* + * Temporary fix for uart layer who didn't setup the spinlock yet + */ + spin_lock_init(&port->lock); + + /* + * Enable the hardware + */ + pwr_delay = __pmz_startup(uap); + if (pwr_delay) + mdelay(pwr_delay); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int __init pmz_console_init(void) +{ + /* Probe ports */ + pmz_probe(); + + /* TODO: Autoprobe console based on OF */ + /* pmz_console.index = i; */ + register_console(&pmz_console); + + return 0; + +} +console_initcall(pmz_console_init); +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +module_init(init_pmz); +module_exit(exit_pmz); diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h new file mode 100644 index 0000000..cbc34fb --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.h @@ -0,0 +1,396 @@ +#ifndef __PMAC_ZILOG_H__ +#define __PMAC_ZILOG_H__ + +#ifdef CONFIG_PPC_PMAC +#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) +#else +#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) +#endif + +/* + * At most 2 ESCCs with 2 ports each + */ +#define MAX_ZS_PORTS 4 + +/* + * We wrap our port structure around the generic uart_port. + */ +#define NUM_ZSREGS 17 + +struct uart_pmac_port { + struct uart_port port; + struct uart_pmac_port *mate; + +#ifdef CONFIG_PPC_PMAC + /* macio_dev for the escc holding this port (maybe be null on + * early inited port) + */ + struct macio_dev *dev; + /* device node to this port, this points to one of 2 childs + * of "escc" node (ie. ch-a or ch-b) + */ + struct device_node *node; +#else + struct platform_device *node; +#endif + + /* Port type as obtained from device tree (IRDA, modem, ...) */ + int port_type; + u8 curregs[NUM_ZSREGS]; + + unsigned int flags; +#define PMACZILOG_FLAG_IS_CONS 0x00000001 +#define PMACZILOG_FLAG_IS_KGDB 0x00000002 +#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 +#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 +#define PMACZILOG_FLAG_REGS_HELD 0x00000010 +#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 +#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 +#define PMACZILOG_FLAG_ENABLED 0x00000080 +#define PMACZILOG_FLAG_IS_IRDA 0x00000100 +#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 +#define PMACZILOG_FLAG_HAS_DMA 0x00000400 +#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 +#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000 +#define PMACZILOG_FLAG_IS_OPEN 0x00002000 +#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000 +#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 +#define PMACZILOG_FLAG_BREAK 0x00010000 + + unsigned char parity_mask; + unsigned char prev_status; + + volatile u8 __iomem *control_reg; + volatile u8 __iomem *data_reg; + +#ifdef CONFIG_PPC_PMAC + unsigned int tx_dma_irq; + unsigned int rx_dma_irq; + volatile struct dbdma_regs __iomem *tx_dma_regs; + volatile struct dbdma_regs __iomem *rx_dma_regs; +#endif + + struct ktermios termios_cache; +}; + +#define to_pmz(p) ((struct uart_pmac_port *)(p)) + +static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) +{ + if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) + return uap; + return uap->mate; +} + +/* + * Register accessors. Note that we don't need to enforce a recovery + * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, + * though if we try to use this driver on older machines, we might have + * to add it back + */ +static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) +{ + if (reg != 0) + writeb(reg, port->control_reg); + return readb(port->control_reg); +} + +static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) +{ + if (reg != 0) + writeb(reg, port->control_reg); + writeb(value, port->control_reg); +} + +static inline u8 read_zsdata(struct uart_pmac_port *port) +{ + return readb(port->data_reg); +} + +static inline void write_zsdata(struct uart_pmac_port *port, u8 data) +{ + writeb(data, port->data_reg); +} + +static inline void zssync(struct uart_pmac_port *port) +{ + (void)readb(port->control_reg); +} + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 +#define R7P 16 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ +#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ +#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENABLE 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (Some enhanced feature control) */ +#define ENEXREAD 0x40 /* Enable read of some write registers */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define EN85C30 1 /* Enable some 85c30-enhanced registers */ +#define ZCIE 2 /* Zero count IE */ +#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x06 + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) +#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + } while(0) + +#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) + +#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c new file mode 100644 index 0000000..0aa75a9 --- /dev/null +++ b/drivers/tty/serial/pnx8xxx_uart.c @@ -0,0 +1,854 @@ +/* + * UART driver for PNX8XXX SoCs + * + * Author: Per Hallsmark per.hallsmark@mvista.com + * Ported to 2.6 kernel by EmbeddedAlley + * Reworked by Vitaly Wool + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + * + */ + +#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* We'll be using StrongARM sa1100 serial port major/minor */ +#define SERIAL_PNX8XXX_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 2 + +#define PNX8XXX_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to FIFO + * and interrupt status bits + */ +#define SM_TO_FIFO(x) ((x) >> 10) +#define SM_TO_ISTAT(x) ((x) & 0x000001ff) +#define FIFO_TO_SM(x) ((x) << 10) +#define ISTAT_TO_SM(x) ((x) & 0x000001ff) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x1000 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +extern struct pnx8xxx_port pnx8xxx_ports[]; + +static inline int serial_in(struct pnx8xxx_port *sport, int offset) +{ + return (__raw_readl(sport->port.membase + offset)); +} + +static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) +{ + __raw_writel(value, sport->port.membase + offset); +} + +/* + * Handle any change of modem status signal since we were last called. + */ +static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void pnx8xxx_timeout(unsigned long data) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + pnx8xxx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void pnx8xxx_stop_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); +} + +/* + * interrupts may not be disabled on entry + */ +static void pnx8xxx_start_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); + + /* Enable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); +} + +/* + * Interrupts enabled + */ +static void pnx8xxx_stop_rx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable RX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); + + /* Clear all pending RX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void pnx8xxx_enable_ms(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) +{ + struct tty_struct *tty = sport->port.state->port.tty; + unsigned int status, ch, flg; + + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { + ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | + PNX8XXX_UART_FIFO_RXPAR | + PNX8XXX_UART_FIFO_RXBRK) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { + status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); + sport->port.icount.brk++; + if (uart_handle_break(&sport->port)) + goto ignore_char; + } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + sport->port.icount.parity++; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + sport->port.icount.frame++; + if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + flg = TTY_PARITY; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); + + ignore_char: + serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | + PNX8XXX_UART_LCR_RX_NEXT); + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + } + tty_flip_buffer_push(tty); +} + +static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + pnx8xxx_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + pnx8xxx_stop_tx(&sport->port); + return; + } + + /* + * TX while bytes available + */ + while (((serial_in(sport, PNX8XXX_FIFO) & + PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { + serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + pnx8xxx_stop_tx(&sport->port); +} + +static irqreturn_t pnx8xxx_int(int irq, void *dev_id) +{ + struct pnx8xxx_port *sport = dev_id; + unsigned int status; + + spin_lock(&sport->port.lock); + /* Get the interrupts */ + status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); + + /* Byte or break signal received */ + if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) + pnx8xxx_rx_chars(sport); + + /* TX holding register empty - transmit a byte */ + if (status & PNX8XXX_UART_INT_TX) + pnx8xxx_tx_chars(sport); + + /* Clear the ISTAT register */ + serial_out(sport, PNX8XXX_ICLR, status); + + spin_unlock(&sport->port.lock); + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int pnx8xxx_tx_empty(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; +} + +static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int mctrl = TIOCM_DSR; + unsigned int msr; + + /* REVISIT */ + + msr = serial_in(sport, PNX8XXX_MCR); + + mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; + mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; + + return mctrl; +} + +static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +#if 0 /* FIXME */ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int msr; +#endif +} + +/* + * Interrupts always disabled. + */ +static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr; + + spin_lock_irqsave(&sport->port.lock, flags); + lcr = serial_in(sport, PNX8XXX_LCR); + if (break_state == -1) + lcr |= PNX8XXX_UART_LCR_TXBREAK; + else + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + serial_out(sport, PNX8XXX_LCR, lcr); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int pnx8xxx_startup(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, pnx8xxx_int, 0, + "pnx8xxx-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | + PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + pnx8xxx_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void pnx8xxx_shutdown(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int lcr; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Disable all interrupts + */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* + * Reset the Tx and Rx FIFOS, disable the break condition + */ + lcr = serial_in(sport, PNX8XXX_LCR); + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; + serial_out(sport, PNX8XXX_LCR, lcr); + + /* + * Clear all interrupts + */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); +} + +static void +pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr_fcr, old_ien, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + lcr_fcr = PNX8XXX_UART_LCR_8BIT; + else + lcr_fcr = 0; + + if (termios->c_cflag & CSTOPB) + lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; + if (termios->c_cflag & PARENB) { + lcr_fcr |= PNX8XXX_UART_LCR_PAREN; + if (!(termios->c_cflag & PARODD)) + lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | + ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) + barrier(); + + /* then, disable everything */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* Reset the Rx and Tx FIFOs too */ + lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; + lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; + + /* set the parity, stop bits and data size */ + serial_out(sport, PNX8XXX_LCR, lcr_fcr); + + /* set the baud rate */ + quot -= 1; + serial_out(sport, PNX8XXX_BAUD, quot); + + serial_out(sport, PNX8XXX_ICLR, -1); + + serial_out(sport, PNX8XXX_IEN, old_ien); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + pnx8xxx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *pnx8xxx_type(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void pnx8xxx_release_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int pnx8xxx_request_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "pnx8xxx-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pnx8xxx_config_port(struct uart_port *port, int flags) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + if (flags & UART_CONFIG_TYPE && + pnx8xxx_request_port(&sport->port) == 0) + sport->port.type = PORT_PNX8XXX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_PNX8XXX and PORT_UNKNOWN + */ +static int +pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops pnx8xxx_pops = { + .tx_empty = pnx8xxx_tx_empty, + .set_mctrl = pnx8xxx_set_mctrl, + .get_mctrl = pnx8xxx_get_mctrl, + .stop_tx = pnx8xxx_stop_tx, + .start_tx = pnx8xxx_start_tx, + .stop_rx = pnx8xxx_stop_rx, + .enable_ms = pnx8xxx_enable_ms, + .break_ctl = pnx8xxx_break_ctl, + .startup = pnx8xxx_startup, + .shutdown = pnx8xxx_shutdown, + .set_termios = pnx8xxx_set_termios, + .type = pnx8xxx_type, + .release_port = pnx8xxx_release_port, + .request_port = pnx8xxx_request_port, + .config_port = pnx8xxx_config_port, + .verify_port = pnx8xxx_verify_port, +}; + + +/* + * Setup the PNX8XXX serial ports. + * + * Note also that we support "console=ttySx" where "x" is either 0 or 1. + */ +static void __init pnx8xxx_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + init_timer(&pnx8xxx_ports[i].timer); + pnx8xxx_ports[i].timer.function = pnx8xxx_timeout; + pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i]; + pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; + } +} + +#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE + +static void pnx8xxx_console_putchar(struct uart_port *port, int ch) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int status; + + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + serial_out(sport, PNX8XXX_FIFO, ch); +} + +/* + * Interrupts are disabled on entering + */static void +pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; + unsigned int old_ien, status; + + /* + * First, save IEN and then disable interrupts + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IEN + */ + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + + /* Clear TX and EMPTY interrupt */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | + PNX8XXX_UART_INT_EMPTY); + + serial_out(sport, PNX8XXX_IEN, old_ien); +} + +static int __init +pnx8xxx_console_setup(struct console *co, char *options) +{ + struct pnx8xxx_port *sport; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &pnx8xxx_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver pnx8xxx_reg; +static struct console pnx8xxx_console = { + .name = "ttyS", + .write = pnx8xxx_console_write, + .device = uart_console_device, + .setup = pnx8xxx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pnx8xxx_reg, +}; + +static int __init pnx8xxx_rs_console_init(void) +{ + pnx8xxx_init_ports(); + register_console(&pnx8xxx_console); + return 0; +} +console_initcall(pnx8xxx_rs_console_init); + +#define PNX8XXX_CONSOLE &pnx8xxx_console +#else +#define PNX8XXX_CONSOLE NULL +#endif + +static struct uart_driver pnx8xxx_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .dev_name = "ttyS", + .major = SERIAL_PNX8XXX_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = PNX8XXX_CONSOLE, +}; + +static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_suspend_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_resume(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_resume_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_probe(struct platform_device *pdev) +{ + struct resource *res = pdev->resource; + int i; + + for (i = 0; i < pdev->num_resources; i++, res++) { + if (!(res->flags & IORESOURCE_MEM)) + continue; + + for (i = 0; i < NR_PORTS; i++) { + if (pnx8xxx_ports[i].port.mapbase != res->start) + continue; + + pnx8xxx_ports[i].port.dev = &pdev->dev; + uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); + platform_set_drvdata(pdev, &pnx8xxx_ports[i]); + break; + } + } + + return 0; +} + +static int pnx8xxx_serial_remove(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&pnx8xxx_reg, &sport->port); + + return 0; +} + +static struct platform_driver pnx8xxx_serial_driver = { + .driver = { + .name = "pnx8xxx-uart", + .owner = THIS_MODULE, + }, + .probe = pnx8xxx_serial_probe, + .remove = pnx8xxx_serial_remove, + .suspend = pnx8xxx_serial_suspend, + .resume = pnx8xxx_serial_resume, +}; + +static int __init pnx8xxx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: PNX8XXX driver\n"); + + pnx8xxx_init_ports(); + + ret = uart_register_driver(&pnx8xxx_reg); + if (ret == 0) { + ret = platform_driver_register(&pnx8xxx_serial_driver); + if (ret) + uart_unregister_driver(&pnx8xxx_reg); + } + return ret; +} + +static void __exit pnx8xxx_serial_exit(void) +{ + platform_driver_unregister(&pnx8xxx_serial_driver); + uart_unregister_driver(&pnx8xxx_reg); +} + +module_init(pnx8xxx_serial_init); +module_exit(pnx8xxx_serial_exit); + +MODULE_AUTHOR("Embedded Alley Solutions, Inc."); +MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); +MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c new file mode 100644 index 0000000..1102a39 --- /dev/null +++ b/drivers/tty/serial/pxa.c @@ -0,0 +1,879 @@ +/* + * linux/drivers/serial/pxa.c + * + * Based on drivers/serial/8250.c by Russell King. + * + * Author: Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note 1: This driver is made separate from the already too overloaded + * 8250.c because it needs some kirks of its own and that'll make it + * easier to add DMA support. + * + * Note 2: I'm too sick of device allocation policies for serial ports. + * If someone else wants to request an "official" allocation of major/minor + * for this driver please be my guest. And don't forget that new hardware + * to come from Intel might have more than 3 or 4 of those UARTs. Let's + * hope for a better port registration and dynamic device allocation scheme + * with the serial core maintainer satisfaction to appear soon. + */ + + +#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct uart_pxa_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + struct clk *clk; + char *name; +}; + +static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) +{ + offset <<= 2; + return readl(up->port.membase + offset); +} + +static inline void serial_out(struct uart_pxa_port *up, int offset, int value) +{ + offset <<= 2; + writel(value, up->port.membase + offset); +} + +static void serial_pxa_enable_ms(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_pxa_stop_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_pxa_stop_rx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_pxa_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + int max_count = 256; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_pxa_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_pxa_stop_tx(&up->port); + return; + } + + count = up->port.fifosize / 2; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port); +} + +static void serial_pxa_start_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void check_modem_status(struct uart_pxa_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) +{ + struct uart_pxa_port *up = dev_id; + unsigned int iir, lsr; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + if (lsr & UART_LSR_THRE) + transmit_chars(up); + return IRQ_HANDLED; +} + +static unsigned int serial_pxa_tx_empty(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_pxa_get_mctrl(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_pxa_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if 0 +static void serial_pxa_dma_init(struct pxa_uart *up) +{ + up->rxdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); + if (up->rxdma < 0) + goto out; + up->txdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); + if (up->txdma < 0) + goto err_txdma; + up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); + if (!up->dmadesc) + goto err_alloc; + + /* ... */ +err_alloc: + pxa_free_dma(up->txdma); +err_rxdma: + pxa_free_dma(up->rxdma); +out: + return; +} +#endif + +static int serial_pxa_startup(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + int retval; + + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else + up->mcr = 0; + + up->port.uartclk = clk_get_rate(up->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); + if (retval) + return retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl |= TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + serial_out(up, UART_IER, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + return 0; +} + +static void serial_pxa_shutdown(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + free_irq(up->port.irq, up); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + unsigned int dll; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Ensure the port will be enabled. + * This is required especially for serial console. + */ + up->ier |= UART_IER_UUE; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!state) + clk_enable(up->clk); + else + clk_disable(up->clk); +} + +static void serial_pxa_release_port(struct uart_port *port) +{ +} + +static int serial_pxa_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_pxa_config_port(struct uart_port *port, int flags) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + up->port.type = PORT_PXA; +} + +static int +serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_pxa_type(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + return up->name; +} + +static struct uart_pxa_port *serial_pxa_ports[4]; +static struct uart_driver serial_pxa_reg; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_pxa_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_pxa_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_pxa_port *up = serial_pxa_ports[co->index]; + unsigned int ier; + + clk_enable(up->clk); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + clk_disable(up->clk); +} + +static int __init +serial_pxa_console_setup(struct console *co, char *options) +{ + struct uart_pxa_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index == -1 || co->index >= serial_pxa_reg.nr) + co->index = 0; + up = serial_pxa_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_pxa_console = { + .name = "ttyS", + .write = serial_pxa_console_write, + .device = uart_console_device, + .setup = serial_pxa_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_pxa_reg, +}; + +#define PXA_CONSOLE &serial_pxa_console +#else +#define PXA_CONSOLE NULL +#endif + +struct uart_ops serial_pxa_pops = { + .tx_empty = serial_pxa_tx_empty, + .set_mctrl = serial_pxa_set_mctrl, + .get_mctrl = serial_pxa_get_mctrl, + .stop_tx = serial_pxa_stop_tx, + .start_tx = serial_pxa_start_tx, + .stop_rx = serial_pxa_stop_rx, + .enable_ms = serial_pxa_enable_ms, + .break_ctl = serial_pxa_break_ctl, + .startup = serial_pxa_startup, + .shutdown = serial_pxa_shutdown, + .set_termios = serial_pxa_set_termios, + .pm = serial_pxa_pm, + .type = serial_pxa_type, + .release_port = serial_pxa_release_port, + .request_port = serial_pxa_request_port, + .config_port = serial_pxa_config_port, + .verify_port = serial_pxa_verify_port, +}; + +static struct uart_driver serial_pxa_reg = { + .owner = THIS_MODULE, + .driver_name = "PXA serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 4, + .cons = PXA_CONSOLE, +}; + +#ifdef CONFIG_PM +static int serial_pxa_suspend(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_suspend_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_resume(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_resume_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static const struct dev_pm_ops serial_pxa_pm_ops = { + .suspend = serial_pxa_suspend, + .resume = serial_pxa_resume, +}; +#endif + +static int serial_pxa_probe(struct platform_device *dev) +{ + struct uart_pxa_port *sport; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto err_free; + } + + sport->port.type = PORT_PXA; + sport->port.iotype = UPIO_MEM; + sport->port.mapbase = mmres->start; + sport->port.irq = irqres->start; + sport->port.fifosize = 64; + sport->port.ops = &serial_pxa_pops; + sport->port.line = dev->id; + sport->port.dev = &dev->dev; + sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + sport->port.uartclk = clk_get_rate(sport->clk); + + switch (dev->id) { + case 0: sport->name = "FFUART"; break; + case 1: sport->name = "BTUART"; break; + case 2: sport->name = "STUART"; break; + case 3: sport->name = "HWUART"; break; + default: + sport->name = "???"; + break; + } + + sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); + if (!sport->port.membase) { + ret = -ENOMEM; + goto err_clk; + } + + serial_pxa_ports[dev->id] = sport; + + uart_add_one_port(&serial_pxa_reg, &sport->port); + platform_set_drvdata(dev, sport); + + return 0; + + err_clk: + clk_put(sport->clk); + err_free: + kfree(sport); + return ret; +} + +static int serial_pxa_remove(struct platform_device *dev) +{ + struct uart_pxa_port *sport = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + uart_remove_one_port(&serial_pxa_reg, &sport->port); + clk_put(sport->clk); + kfree(sport); + + return 0; +} + +static struct platform_driver serial_pxa_driver = { + .probe = serial_pxa_probe, + .remove = serial_pxa_remove, + + .driver = { + .name = "pxa2xx-uart", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &serial_pxa_pm_ops, +#endif + }, +}; + +int __init serial_pxa_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_pxa_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&serial_pxa_driver); + if (ret != 0) + uart_unregister_driver(&serial_pxa_reg); + + return ret; +} + +void __exit serial_pxa_exit(void) +{ + platform_driver_unregister(&serial_pxa_driver); + uart_unregister_driver(&serial_pxa_reg); +} + +module_init(serial_pxa_init); +module_exit(serial_pxa_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/tty/serial/s3c2400.c b/drivers/tty/serial/s3c2400.c new file mode 100644 index 0000000..fed1a9a --- /dev/null +++ b/drivers/tty/serial/s3c2400.c @@ -0,0 +1,106 @@ +/* linux/drivers/serial/s3c240.c + * + * Driver for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#include + +#include +#include + +#include "samsung.h" + +static int s3c2400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + clk->divisor = 1; + clk->name = "pclk"; + + return 0; +} + +static int s3c2400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + return 0; +} + +static int s3c2400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2400_uart_inf = { + .name = "Samsung S3C2400 UART", + .type = PORT_S3C2400, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2400_serial_getsource, + .set_clksrc = s3c2400_serial_setsource, + .reset_port = s3c2400_serial_resetport, +}; + +static int s3c2400_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); +} + +static struct platform_driver s3c2400_serial_driver = { + .probe = s3c2400_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf); + +static inline int s3c2400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf); +} + +static inline void s3c2400_serial_exit(void) +{ + platform_driver_unregister(&s3c2400_serial_driver); +} + +module_init(s3c2400_serial_init); +module_exit(s3c2400_serial_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver"); +MODULE_ALIAS("platform:s3c2400-uart"); diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c new file mode 100644 index 0000000..73f089d --- /dev/null +++ b/drivers/tty/serial/s3c2410.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c2410.c + * + * Driver for Samsung S3C2410 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + +static int s3c2410_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c2410_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c2410_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2410_uart_inf = { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2410_serial_getsource, + .set_clksrc = s3c2410_serial_setsource, + .reset_port = s3c2410_serial_resetport, +}; + +static int s3c2410_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); +} + +static struct platform_driver s3c2410_serial_driver = { + .probe = s3c2410_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2410-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf); + +static int __init s3c2410_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); +} + +static void __exit s3c2410_serial_exit(void) +{ + platform_driver_unregister(&s3c2410_serial_driver); +} + +module_init(s3c2410_serial_init); +module_exit(s3c2410_serial_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); +MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c new file mode 100644 index 0000000..1700b1a --- /dev/null +++ b/drivers/tty/serial/s3c2412.c @@ -0,0 +1,152 @@ +/* linux/drivers/serial/s3c2412.c + * + * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + +static int s3c2412_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= ~S3C2412_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "usysclk") == 0) + ucon |= S3C2412_UCON_USYSCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2412_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + switch (ucon & S3C2412_UCON_CLKMASK) { + case S3C2412_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2412_UCON_PCLK: + case S3C2412_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2412_UCON_USYSCLK: + clk->divisor = 1; + clk->name = "usysclk"; + break; + } + + return 0; +} + +static int s3c2412_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("%s: port=%p (%08lx), cfg=%p\n", + __func__, port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C2412_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2412_uart_inf = { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2412_serial_getsource, + .set_clksrc = s3c2412_serial_setsource, + .reset_port = s3c2412_serial_resetport, +}; + +/* device management */ + +static int s3c2412_serial_probe(struct platform_device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); +} + +static struct platform_driver s3c2412_serial_driver = { + .probe = s3c2412_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2412-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf); + +static inline int s3c2412_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); +} + +static inline void s3c2412_serial_exit(void) +{ + platform_driver_unregister(&s3c2412_serial_driver); +} + +module_init(s3c2412_serial_init); +module_exit(s3c2412_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c new file mode 100644 index 0000000..094cc39 --- /dev/null +++ b/drivers/tty/serial/s3c2440.c @@ -0,0 +1,181 @@ +/* linux/drivers/serial/s3c2440.c + * + * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + + +static int s3c2440_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + /* todo - proper fclk<>nonfclk switch. */ + + ucon &= ~S3C2440_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "fclk") == 0) + ucon |= S3C2440_UCON_FCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2440_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned long ucon0, ucon1, ucon2; + + switch (ucon & S3C2440_UCON_CLKMASK) { + case S3C2440_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2440_UCON_PCLK: + case S3C2440_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2440_UCON_FCLK: + /* the fun of calculating the uart divisors on + * the s3c2440 */ + + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) { + clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 6; + } else if (ucon1 != 0) { + clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 21; + } else if (ucon2 != 0) { + clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 36; + } else { + /* manual calims 44, seems to be 9 */ + clk->divisor = 9; + } + + clk->name = "fclk"; + break; + } + + return 0; +} + +static int s3c2440_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2440_uart_inf = { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2440_serial_getsource, + .set_clksrc = s3c2440_serial_setsource, + .reset_port = s3c2440_serial_resetport, +}; + +/* device management */ + +static int s3c2440_serial_probe(struct platform_device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); +} + +static struct platform_driver s3c2440_serial_driver = { + .probe = s3c2440_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2440-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf); + +static int __init s3c2440_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); +} + +static void __exit s3c2440_serial_exit(void) +{ + platform_driver_unregister(&s3c2440_serial_driver); +} + +module_init(s3c2440_serial_init); +module_exit(s3c2440_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c new file mode 100644 index 0000000..fad6083 --- /dev/null +++ b/drivers/tty/serial/s3c24a0.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c24a0.c + * + * Driver for Samsung S3C24A0 SoC onboard UARTs. + * + * Based on drivers/serial/s3c2410.c + * + * Author: Sandeep Patil + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "samsung.h" + +static int s3c24a0_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c24a0_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c24a0_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c24a0_uart_inf = { + .name = "Samsung S3C24A0 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C24A0_UFSTAT_RXMASK, + .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, + .rx_fifofull = S3C24A0_UFSTAT_RXFULL, + .tx_fifofull = S3C24A0_UFSTAT_TXFULL, + .tx_fifomask = S3C24A0_UFSTAT_TXMASK, + .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, + .get_clksrc = s3c24a0_serial_getsource, + .set_clksrc = s3c24a0_serial_setsource, + .reset_port = s3c24a0_serial_resetport, +}; + +static int s3c24a0_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); +} + +static struct platform_driver s3c24a0_serial_driver = { + .probe = s3c24a0_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c24a0-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); + +static int __init s3c24a0_serial_init(void) +{ + return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); +} + +static void __exit s3c24a0_serial_exit(void) +{ + platform_driver_unregister(&s3c24a0_serial_driver); +} + +module_init(s3c24a0_serial_init); +module_exit(s3c24a0_serial_exit); + diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c new file mode 100644 index 0000000..4be92ab --- /dev/null +++ b/drivers/tty/serial/s3c6400.c @@ -0,0 +1,152 @@ +/* linux/drivers/serial/s3c6400.c + * + * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "samsung.h" + +static int s3c6400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk0") == 0) { + ucon &= ~S3C6400_UCON_CLKMASK; + ucon |= S3C6400_UCON_UCLK0; + } else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S3C6400_UCON_UCLK1; + else if (strcmp(clk->name, "pclk") == 0) { + /* See notes about transitioning from UCLK to PCLK */ + ucon &= ~S3C6400_UCON_UCLK0; + } else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c6400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S3C6400_UCON_CLKMASK) { + case S3C6400_UCON_UCLK0: + clk->name = "uclk0"; + break; + + case S3C6400_UCON_UCLK1: + clk->name = "uclk1"; + break; + + case S3C6400_UCON_PCLK: + case S3C6400_UCON_PCLK2: + clk->name = "pclk"; + break; + } + + return 0; +} + +static int s3c6400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C6400_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c6400_uart_inf = { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c6400_serial_getsource, + .set_clksrc = s3c6400_serial_setsource, + .reset_port = s3c6400_serial_resetport, +}; + +/* device management */ + +static int s3c6400_serial_probe(struct platform_device *dev) +{ + dbg("s3c6400_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); +} + +static struct platform_driver s3c6400_serial_driver = { + .probe = s3c6400_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c6400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf); + +static int __init s3c6400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); +} + +static void __exit s3c6400_serial_exit(void) +{ + platform_driver_unregister(&s3c6400_serial_driver); +} + +module_init(s3c6400_serial_init); +module_exit(s3c6400_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c new file mode 100644 index 0000000..6ebccd7 --- /dev/null +++ b/drivers/tty/serial/s5pv210.c @@ -0,0 +1,162 @@ +/* linux/drivers/serial/s5pv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on drivers/serial/s3c6400.c + * + * Driver for Samsung S5PV210 SoC UARTs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "samsung.h" + +static int s5pv210_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + struct s3c2410_uartcfg *cfg = port->dev->platform_data; + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if ((cfg->clocks_size) == 1) + return 0; + + if (strcmp(clk->name, "pclk") == 0) + ucon &= ~S5PV210_UCON_CLKMASK; + else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S5PV210_UCON_CLKMASK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s5pv210_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + struct s3c2410_uartcfg *cfg = port->dev->platform_data; + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + if ((cfg->clocks_size) == 1) + return 0; + + switch (ucon & S5PV210_UCON_CLKMASK) { + case S5PV210_UCON_PCLK: + clk->name = "pclk"; + break; + case S5PV210_UCON_UCLK: + clk->name = "uclk1"; + break; + } + + return 0; +} + +static int s5pv210_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= S5PV210_UCON_CLKMASK; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ + .name = "Samsung S5PV210 UART0", \ + .type = PORT_S3C6400, \ + .fifosize = fifo_size, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .get_clksrc = s5pv210_serial_getsource, \ + .set_clksrc = s5pv210_serial_setsource, \ + .reset_port = s5pv210_serial_resetport + +static struct s3c24xx_uart_info s5p_port_fifo256 = { + S5PV210_UART_DEFAULT_INFO(256), +}; + +static struct s3c24xx_uart_info s5p_port_fifo64 = { + S5PV210_UART_DEFAULT_INFO(64), +}; + +static struct s3c24xx_uart_info s5p_port_fifo16 = { + S5PV210_UART_DEFAULT_INFO(16), +}; + +static struct s3c24xx_uart_info *s5p_uart_inf[] = { + [0] = &s5p_port_fifo256, + [1] = &s5p_port_fifo64, + [2] = &s5p_port_fifo16, + [3] = &s5p_port_fifo16, +}; + +/* device management */ +static int s5p_serial_probe(struct platform_device *pdev) +{ + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); +} + +static struct platform_driver s5p_serial_driver = { + .probe = s5p_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s5pv210-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init s5pv210_serial_console_init(void) +{ + return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf); +} + +console_initcall(s5pv210_serial_console_init); + +static int __init s5p_serial_init(void) +{ + return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); +} + +static void __exit s5p_serial_exit(void) +{ + platform_driver_unregister(&s5p_serial_driver); +} + +module_init(s5p_serial_init); +module_exit(s5p_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s5pv210-uart"); +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); +MODULE_AUTHOR("Thomas Abraham "); diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c new file mode 100644 index 0000000..2199d81 --- /dev/null +++ b/drivers/tty/serial/sa1100.c @@ -0,0 +1,918 @@ +/* + * linux/drivers/char/sa1100.c + * + * Driver for SA11x0 serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_SA1100_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 3 + +#define SA1100_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to UTSR[01] + */ +#define SM_TO_UTSR0(x) ((x) & 0xff) +#define SM_TO_UTSR1(x) ((x) >> 8) +#define UTSR0_TO_SM(x) ((x)) +#define UTSR1_TO_SM(x) ((x) << 8) + +#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) +#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) +#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) +#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) +#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) +#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) +#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) + +#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) +#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) +#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) +#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) +#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) +#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) +#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x24 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +struct sa1100_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; +}; + +/* + * Handle any change of modem status signal since we were last called. + */ +static void sa1100_mctrl_check(struct sa1100_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void sa1100_timeout(unsigned long data) +{ + struct sa1100_port *sport = (struct sa1100_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + sa1100_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void sa1100_stop_tx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); + sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); +} + +/* + * port locked and interrupts disabled + */ +static void sa1100_start_tx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); + UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); +} + +/* + * Interrupts enabled + */ +static void sa1100_stop_rx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void sa1100_enable_ms(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void +sa1100_rx_chars(struct sa1100_port *sport) +{ + struct tty_struct *tty = sport->port.state->port.tty; + unsigned int status, ch, flg; + + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + while (status & UTSR1_TO_SM(UTSR1_RNE)) { + ch = UART_GET_CHAR(sport); + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) { + if (status & UTSR1_TO_SM(UTSR1_PRE)) + sport->port.icount.parity++; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + sport->port.icount.frame++; + if (status & UTSR1_TO_SM(UTSR1_ROR)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & UTSR1_TO_SM(UTSR1_PRE)) + flg = TTY_PARITY; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); + + ignore_char: + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + } + tty_flip_buffer_push(tty); +} + +static void sa1100_tx_chars(struct sa1100_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + UART_PUT_CHAR(sport, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + sa1100_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + sa1100_stop_tx(&sport->port); + return; + } + + /* + * Tried using FIFO (not checking TNF) for fifo fill: + * still had the '4 bytes repeated' problem. + */ + while (UART_GET_UTSR1(sport) & UTSR1_TNF) { + UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + sa1100_stop_tx(&sport->port); +} + +static irqreturn_t sa1100_int(int irq, void *dev_id) +{ + struct sa1100_port *sport = dev_id; + unsigned int status, pass_counter = 0; + + spin_lock(&sport->port.lock); + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; + do { + if (status & (UTSR0_RFS | UTSR0_RID)) { + /* Clear the receiver idle bit, if set */ + if (status & UTSR0_RID) + UART_PUT_UTSR0(sport, UTSR0_RID); + sa1100_rx_chars(sport); + } + + /* Clear the relevant break bits */ + if (status & (UTSR0_RBB | UTSR0_REB)) + UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); + + if (status & UTSR0_RBB) + sport->port.icount.brk++; + + if (status & UTSR0_REB) + uart_handle_break(&sport->port); + + if (status & UTSR0_TFS) + sa1100_tx_chars(sport); + if (pass_counter++ > SA1100_ISR_PASS_LIMIT) + break; + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | + ~UTSR0_TFS; + } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); + spin_unlock(&sport->port.lock); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int sa1100_tx_empty(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; +} + +static unsigned int sa1100_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Interrupts always disabled. + */ +static void sa1100_break_ctl(struct uart_port *port, int break_state) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr3; + + spin_lock_irqsave(&sport->port.lock, flags); + utcr3 = UART_GET_UTCR3(sport); + if (break_state == -1) + utcr3 |= UTCR3_BRK; + else + utcr3 &= ~UTCR3_BRK; + UART_PUT_UTCR3(sport, utcr3); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int sa1100_startup(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, sa1100_int, 0, + "sa11x0-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + UART_PUT_UTSR0(sport, -1); + UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + sa1100_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void sa1100_shutdown(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_UTCR3(sport, 0); +} + +static void +sa1100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr0, old_utcr3, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + utcr0 = UTCR0_DSS; + else + utcr0 = 0; + + if (termios->c_cflag & CSTOPB) + utcr0 |= UTCR0_SBS; + if (termios->c_cflag & PARENB) { + utcr0 |= UTCR0_PE; + if (!(termios->c_cflag & PARODD)) + utcr0 |= UTCR0_OES; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); + sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_ROR); + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); + + while (UART_GET_UTSR1(sport) & UTSR1_TBY) + barrier(); + + /* then, disable everything */ + UART_PUT_UTCR3(sport, 0); + + /* set the parity, stop bits and data size */ + UART_PUT_UTCR0(sport, utcr0); + + /* set the baud rate */ + quot -= 1; + UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); + UART_PUT_UTCR2(sport, (quot & 0xff)); + + UART_PUT_UTSR0(sport, -1); + + UART_PUT_UTCR3(sport, old_utcr3); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + sa1100_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *sa1100_type(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void sa1100_release_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int sa1100_request_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "sa11x0-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void sa1100_config_port(struct uart_port *port, int flags) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + if (flags & UART_CONFIG_TYPE && + sa1100_request_port(&sport->port) == 0) + sport->port.type = PORT_SA1100; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_SA1100 and PORT_UNKNOWN + */ +static int +sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops sa1100_pops = { + .tx_empty = sa1100_tx_empty, + .set_mctrl = sa1100_set_mctrl, + .get_mctrl = sa1100_get_mctrl, + .stop_tx = sa1100_stop_tx, + .start_tx = sa1100_start_tx, + .stop_rx = sa1100_stop_rx, + .enable_ms = sa1100_enable_ms, + .break_ctl = sa1100_break_ctl, + .startup = sa1100_startup, + .shutdown = sa1100_shutdown, + .set_termios = sa1100_set_termios, + .type = sa1100_type, + .release_port = sa1100_release_port, + .request_port = sa1100_request_port, + .config_port = sa1100_config_port, + .verify_port = sa1100_verify_port, +}; + +static struct sa1100_port sa1100_ports[NR_PORTS]; + +/* + * Setup the SA1100 serial ports. Note that we don't include the IrDA + * port here since we have our own SIR/FIR driver (see drivers/net/irda) + * + * Note also that we support "console=ttySAx" where "x" is either 0 or 1. + * Which serial port this ends up being depends on the machine you're + * running this kernel on. I'm not convinced that this is a good idea, + * but that's the way it traditionally works. + * + * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer + * used here. + */ +static void __init sa1100_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + sa1100_ports[i].port.uartclk = 3686400; + sa1100_ports[i].port.ops = &sa1100_pops; + sa1100_ports[i].port.fifosize = 8; + sa1100_ports[i].port.line = i; + sa1100_ports[i].port.iotype = UPIO_MEM; + init_timer(&sa1100_ports[i].timer); + sa1100_ports[i].timer.function = sa1100_timeout; + sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; + } + + /* + * make transmit lines outputs, so that when the port + * is closed, the output is in the MARK state. + */ + PPDR |= PPC_TXD1 | PPC_TXD3; + PPSR |= PPC_TXD1 | PPC_TXD3; +} + +void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) +{ + if (fns->get_mctrl) + sa1100_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + sa1100_pops.set_mctrl = fns->set_mctrl; + + sa1100_pops.pm = fns->pm; + sa1100_pops.set_wake = fns->set_wake; +} + +void __init sa1100_register_uart(int idx, int port) +{ + if (idx >= NR_PORTS) { + printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); + return; + } + + switch (port) { + case 1: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; + sa1100_ports[idx].port.mapbase = _Ser1UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser1UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 2: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; + sa1100_ports[idx].port.mapbase = _Ser2UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser2ICP; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 3: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; + sa1100_ports[idx].port.mapbase = _Ser3UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser3UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + default: + printk(KERN_ERR "%s: bad port number %d\n", __func__, port); + } +} + + +#ifdef CONFIG_SERIAL_SA1100_CONSOLE +static void sa1100_console_putchar(struct uart_port *port, int ch) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) + barrier(); + UART_PUT_CHAR(sport, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sa1100_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sa1100_port *sport = &sa1100_ports[co->index]; + unsigned int old_utcr3, status; + + /* + * First, save UTCR3 and then disable interrupts + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | + UTCR3_TXE); + + uart_console_write(&sport->port, s, count, sa1100_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UTCR3 + */ + do { + status = UART_GET_UTSR1(sport); + } while (status & UTSR1_TBY); + UART_PUT_UTCR3(sport, old_utcr3); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +sa1100_console_get_options(struct sa1100_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned int utcr3; + + utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); + if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { + /* ok, the port was enabled */ + unsigned int utcr0, quot; + + utcr0 = UART_GET_UTCR0(sport); + + *parity = 'n'; + if (utcr0 & UTCR0_PE) { + if (utcr0 & UTCR0_OES) + *parity = 'e'; + else + *parity = 'o'; + } + + if (utcr0 & UTCR0_DSS) + *bits = 8; + else + *bits = 7; + + quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; + quot &= 0xfff; + *baud = sport->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init +sa1100_console_setup(struct console *co, char *options) +{ + struct sa1100_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &sa1100_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + sa1100_console_get_options(sport, &baud, &parity, &bits); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver sa1100_reg; +static struct console sa1100_console = { + .name = "ttySA", + .write = sa1100_console_write, + .device = uart_console_device, + .setup = sa1100_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sa1100_reg, +}; + +static int __init sa1100_rs_console_init(void) +{ + sa1100_init_ports(); + register_console(&sa1100_console); + return 0; +} +console_initcall(sa1100_rs_console_init); + +#define SA1100_CONSOLE &sa1100_console +#else +#define SA1100_CONSOLE NULL +#endif + +static struct uart_driver sa1100_reg = { + .owner = THIS_MODULE, + .driver_name = "ttySA", + .dev_name = "ttySA", + .major = SERIAL_SA1100_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = SA1100_CONSOLE, +}; + +static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_suspend_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_resume(struct platform_device *dev) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_resume_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_probe(struct platform_device *dev) +{ + struct resource *res = dev->resource; + int i; + + for (i = 0; i < dev->num_resources; i++, res++) + if (res->flags & IORESOURCE_MEM) + break; + + if (i < dev->num_resources) { + for (i = 0; i < NR_PORTS; i++) { + if (sa1100_ports[i].port.mapbase != res->start) + continue; + + sa1100_ports[i].port.dev = &dev->dev; + uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); + platform_set_drvdata(dev, &sa1100_ports[i]); + break; + } + } + + return 0; +} + +static int sa1100_serial_remove(struct platform_device *pdev) +{ + struct sa1100_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&sa1100_reg, &sport->port); + + return 0; +} + +static struct platform_driver sa11x0_serial_driver = { + .probe = sa1100_serial_probe, + .remove = sa1100_serial_remove, + .suspend = sa1100_serial_suspend, + .resume = sa1100_serial_resume, + .driver = { + .name = "sa11x0-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init sa1100_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: SA11x0 driver\n"); + + sa1100_init_ports(); + + ret = uart_register_driver(&sa1100_reg); + if (ret == 0) { + ret = platform_driver_register(&sa11x0_serial_driver); + if (ret) + uart_unregister_driver(&sa1100_reg); + } + return ret; +} + +static void __exit sa1100_serial_exit(void) +{ + platform_driver_unregister(&sa11x0_serial_driver); + uart_unregister_driver(&sa1100_reg); +} + +module_init(sa1100_serial_init); +module_exit(sa1100_serial_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("SA1100 generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); +MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c new file mode 100644 index 0000000..7ac2bf5 --- /dev/null +++ b/drivers/tty/serial/samsung.c @@ -0,0 +1,1487 @@ +/* linux/drivers/serial/samsuing.c + * + * Driver core for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Hote on 2410 error handling + * + * The s3c2410 manual has a love/hate affair with the contents of the + * UERSTAT register in the UART blocks, and keeps marking some of the + * error bits as reserved. Having checked with the s3c2410x01, + * it copes with BREAKs properly, so I am happy to ignore the RESERVED + * feature from the latter versions of the manual. + * + * If it becomes aparrent that latter versions of the 2410 remove these + * bits, then action will have to be taken to differentiate the versions + * and change the policy on BREAK + * + * BJD, 04-Nov-2004 +*/ + +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include "samsung.h" + +/* UART name and device definitions */ + +#define S3C24XX_SERIAL_NAME "ttySAC" +#define S3C24XX_SERIAL_MAJOR 204 +#define S3C24XX_SERIAL_MINOR 64 + +/* macros to change one thing to another */ + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* flag to ignore all characters comming in */ +#define RXSTAT_DUMMY_READ (0x10000000) + +static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) +{ + return container_of(port, struct s3c24xx_uart_port, port); +} + +/* translate a port to the device name */ + +static inline const char *s3c24xx_serial_portname(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) +{ + return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); +} + +static void s3c24xx_serial_rx_enable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon, ufcon; + int count = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (--count && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + + ucon = rd_regl(port, S3C2410_UCON); + ucon |= S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 1; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_rx_disable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 0; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_stop_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (tx_enabled(port)) { + disable_irq_nosync(ourport->tx_irq); + tx_enabled(port) = 0; + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_enable(port); + } +} + +static void s3c24xx_serial_start_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (!tx_enabled(port)) { + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_disable(port); + + enable_irq(ourport->tx_irq); + tx_enabled(port) = 1; + } +} + + +static void s3c24xx_serial_stop_rx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (rx_enabled(port)) { + dbg("s3c24xx_serial_stop_rx: port=%p\n", port); + disable_irq_nosync(ourport->rx_irq); + rx_enabled(port) = 0; + } +} + +static void s3c24xx_serial_enable_ms(struct uart_port *port) +{ +} + +static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) +{ + return to_ourport(port)->info; +} + +static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) +{ + if (port->dev == NULL) + return NULL; + + return (struct s3c2410_uartcfg *)port->dev->platform_data; +} + +static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, + unsigned long ufstat) +{ + struct s3c24xx_uart_info *info = ourport->info; + + if (ufstat & info->rx_fifofull) + return info->fifosize; + + return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; +} + + +/* ? - where has parity gone?? */ +#define S3C2410_UERSTAT_PARITY (0x1000) + +static irqreturn_t +s3c24xx_serial_rx_chars(int irq, void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + struct tty_struct *tty = port->state->port.tty; + unsigned int ufcon, ch, flag, ufstat, uerstat; + int max_count = 64; + + while (max_count-- > 0) { + ufcon = rd_regl(port, S3C2410_UFCON); + ufstat = rd_regl(port, S3C2410_UFSTAT); + + if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) + break; + + uerstat = rd_regl(port, S3C2410_UERSTAT); + ch = rd_regb(port, S3C2410_URXH); + + if (port->flags & UPF_CONS_FLOW) { + int txe = s3c24xx_serial_txempty_nofifo(port); + + if (rx_enabled(port)) { + if (!txe) { + rx_enabled(port) = 0; + continue; + } + } else { + if (txe) { + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + rx_enabled(port) = 1; + goto out; + } + continue; + } + } + + /* insert the character into the buffer */ + + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { + dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", + ch, uerstat); + + /* check for break */ + if (uerstat & S3C2410_UERSTAT_BREAK) { + dbg("break!\n"); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + + if (uerstat & S3C2410_UERSTAT_FRAME) + port->icount.frame++; + if (uerstat & S3C2410_UERSTAT_OVERRUN) + port->icount.overrun++; + + uerstat &= port->read_status_mask; + + if (uerstat & S3C2410_UERSTAT_BREAK) + flag = TTY_BREAK; + else if (uerstat & S3C2410_UERSTAT_PARITY) + flag = TTY_PARITY; + else if (uerstat & (S3C2410_UERSTAT_FRAME | + S3C2410_UERSTAT_OVERRUN)) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, + ch, flag); + + ignore_char: + continue; + } + tty_flip_buffer_push(tty); + + out: + return IRQ_HANDLED; +} + +static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + int count = 256; + + if (port->x_char) { + wr_regb(port, S3C2410_UTXH, port->x_char); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + /* if there isnt anything more to transmit, or the uart is now + * stopped, disable the uart and exit + */ + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + s3c24xx_serial_stop_tx(port); + goto out; + } + + /* try and drain the buffer... */ + + while (!uart_circ_empty(xmit) && count-- > 0) { + if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) + break; + + wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + s3c24xx_serial_stop_tx(port); + + out: + return IRQ_HANDLED; +} + +static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); + unsigned long ufcon = rd_regl(port, S3C2410_UFCON); + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + if ((ufstat & info->tx_fifomask) != 0 || + (ufstat & info->tx_fifofull)) + return 0; + + return 1; + } + + return s3c24xx_serial_txempty_nofifo(port); +} + +/* no modem control lines */ +static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) +{ + unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); + + if (umstat & S3C2410_UMSTAT_CTS) + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + else + return TIOCM_CAR | TIOCM_DSR; +} + +static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* todo - possibly remove AFC and do manual CTS */ +} + +static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + + if (break_state) + ucon |= S3C2410_UCON_SBREAK; + else + ucon &= ~S3C2410_UCON_SBREAK; + + wr_regl(port, S3C2410_UCON, ucon); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (ourport->tx_claimed) { + free_irq(ourport->tx_irq, ourport); + tx_enabled(port) = 0; + ourport->tx_claimed = 0; + } + + if (ourport->rx_claimed) { + free_irq(ourport->rx_irq, ourport); + ourport->rx_claimed = 0; + rx_enabled(port) = 0; + } +} + + +static int s3c24xx_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + int ret; + + dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", + port->mapbase, port->membase); + + rx_enabled(port) = 1; + + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret != 0) { + printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); + return ret; + } + + ourport->rx_claimed = 1; + + dbg("requesting tx irq...\n"); + + tx_enabled(port) = 1; + + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret) { + printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); + goto err; + } + + ourport->tx_claimed = 1; + + dbg("s3c24xx_serial_startup ok\n"); + + /* the port reset code should have done the correct + * register setup for the port controls */ + + return ret; + + err: + s3c24xx_serial_shutdown(port); + return ret; +} + +/* power power management control */ + +static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, + unsigned int old) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + ourport->pm_level = level; + + switch (level) { + case 3: + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_disable(ourport->baudclk); + + clk_disable(ourport->clk); + break; + + case 0: + clk_enable(ourport->clk); + + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_enable(ourport->baudclk); + + break; + default: + printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); + } +} + +/* baud rate calculation + * + * The UARTs on the S3C2410/S3C2440 can take their clocks from a number + * of different sources, including the peripheral clock ("pclk") and an + * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") + * with a programmable extra divisor. + * + * The following code goes through the clock sources, and calculates the + * baud clocks (and the resultant actual baud rates) and then tries to + * pick the closest one and select that. + * +*/ + + +#define MAX_CLKS (8) + +static struct s3c24xx_uart_clksrc tmp_clksrc = { + .name = "pclk", + .min_baud = 0, + .max_baud = 0, + .divisor = 1, +}; + +static inline int +s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->get_clksrc)(port, c); +} + +static inline int +s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->set_clksrc)(port, c); +} + +struct baud_calc { + struct s3c24xx_uart_clksrc *clksrc; + unsigned int calc; + unsigned int divslot; + unsigned int quot; + struct clk *src; +}; + +static int s3c24xx_serial_calcbaud(struct baud_calc *calc, + struct uart_port *port, + struct s3c24xx_uart_clksrc *clksrc, + unsigned int baud) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long rate; + + calc->src = clk_get(port->dev, clksrc->name); + if (calc->src == NULL || IS_ERR(calc->src)) + return 0; + + rate = clk_get_rate(calc->src); + rate /= clksrc->divisor; + + calc->clksrc = clksrc; + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } + + calc->quot--; + return 1; +} + +static unsigned int s3c24xx_serial_getclk(struct uart_port *port, + struct s3c24xx_uart_clksrc **clksrc, + struct clk **clk, + unsigned int baud) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_clksrc *clkp; + struct baud_calc res[MAX_CLKS]; + struct baud_calc *resptr, *best, *sptr; + int i; + + clkp = cfg->clocks; + best = NULL; + + if (cfg->clocks_size < 2) { + if (cfg->clocks_size == 0) + clkp = &tmp_clksrc; + + /* check to see if we're sourcing fclk, and if so we're + * going to have to update the clock source + */ + + if (strcmp(clkp->name, "fclk") == 0) { + struct s3c24xx_uart_clksrc src; + + s3c24xx_serial_getsource(port, &src); + + /* check that the port already using fclk, and if + * not, then re-select fclk + */ + + if (strcmp(src.name, clkp->name) == 0) { + s3c24xx_serial_setsource(port, clkp); + s3c24xx_serial_getsource(port, &src); + } + + clkp->divisor = src.divisor; + } + + s3c24xx_serial_calcbaud(res, port, clkp, baud); + best = res; + resptr = best + 1; + } else { + resptr = res; + + for (i = 0; i < cfg->clocks_size; i++, clkp++) { + if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) + resptr++; + } + } + + /* ok, we now need to select the best clock we found */ + + if (!best) { + unsigned int deviation = (1<<30)|((1<<30)-1); + int calc_deviation; + + for (sptr = res; sptr < resptr; sptr++) { + calc_deviation = baud - sptr->calc; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; + + if (calc_deviation < deviation) { + best = sptr; + deviation = calc_deviation; + } + } + } + + /* store results to pass back */ + + *clksrc = best->clksrc; + *clk = best->src; + + return best->quot; +} + +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + +static void s3c24xx_serial_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_clksrc *clksrc = NULL; + struct clk *clk = NULL; + unsigned long flags; + unsigned int baud, quot; + unsigned int ulcon; + unsigned int umcon; + unsigned int udivslot = 0; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); + + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + + /* check to see if we need to change clock source */ + + if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); + s3c24xx_serial_setsource(port, clksrc); + + if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { + clk_disable(ourport->baudclk); + ourport->baudclk = NULL; + } + + clk_enable(clk); + + ourport->clksrc = clksrc; + ourport->baudclk = clk; + ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; + } + + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + if (cfg->has_fracval) { + udivslot = (div & 15); + dbg("fracval = %04x\n", udivslot); + } else { + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + } + + switch (termios->c_cflag & CSIZE) { + case CS5: + dbg("config: 5bits/char\n"); + ulcon = S3C2410_LCON_CS5; + break; + case CS6: + dbg("config: 6bits/char\n"); + ulcon = S3C2410_LCON_CS6; + break; + case CS7: + dbg("config: 7bits/char\n"); + ulcon = S3C2410_LCON_CS7; + break; + case CS8: + default: + dbg("config: 8bits/char\n"); + ulcon = S3C2410_LCON_CS8; + break; + } + + /* preserve original lcon IR settings */ + ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); + + if (termios->c_cflag & CSTOPB) + ulcon |= S3C2410_LCON_STOPB; + + umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + ulcon |= S3C2410_LCON_PODD; + else + ulcon |= S3C2410_LCON_PEVEN; + } else { + ulcon |= S3C2410_LCON_PNONE; + } + + spin_lock_irqsave(&port->lock, flags); + + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); + + wr_regl(port, S3C2410_ULCON, ulcon); + wr_regl(port, S3C2410_UBRDIV, quot); + wr_regl(port, S3C2410_UMCON, umcon); + + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", + rd_regl(port, S3C2410_ULCON), + rd_regl(port, S3C2410_UCON), + rd_regl(port, S3C2410_UFCON)); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *s3c24xx_serial_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_S3C2410: + return "S3C2410"; + case PORT_S3C2440: + return "S3C2440"; + case PORT_S3C2412: + return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; + default: + return NULL; + } +} + +#define MAP_SIZE (0x100) + +static void s3c24xx_serial_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, MAP_SIZE); +} + +static int s3c24xx_serial_request_port(struct uart_port *port) +{ + const char *name = s3c24xx_serial_portname(port); + return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; +} + +static void s3c24xx_serial_config_port(struct uart_port *port, int flags) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (flags & UART_CONFIG_TYPE && + s3c24xx_serial_request_port(port) == 0) + port->type = info->type; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int +s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (ser->type != PORT_UNKNOWN && ser->type != info->type) + return -EINVAL; + + return 0; +} + + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct console s3c24xx_serial_console; + +#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console +#else +#define S3C24XX_SERIAL_CONSOLE NULL +#endif + +static struct uart_ops s3c24xx_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .enable_ms = s3c24xx_serial_enable_ms, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = s3c24xx_serial_startup, + .shutdown = s3c24xx_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, + .release_port = s3c24xx_serial_release_port, + .request_port = s3c24xx_serial_request_port, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +}; + + +static struct uart_driver s3c24xx_uart_drv = { + .owner = THIS_MODULE, + .dev_name = "s3c2410_serial", + .nr = CONFIG_SERIAL_SAMSUNG_UARTS, + .cons = S3C24XX_SERIAL_CONSOLE, + .driver_name = S3C24XX_SERIAL_NAME, + .major = S3C24XX_SERIAL_MAJOR, + .minor = S3C24XX_SERIAL_MINOR, +}; + +static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { + [0] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX0, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + } + }, + [1] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX1, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + } + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 + + [2] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX2, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + } + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX3, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 3, + } + } +#endif +}; + +/* s3c24xx_serial_resetport + * + * wrapper to call the specific reset for this port (reset the fifos + * and the settings) +*/ + +static inline int s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->reset_port)(port, cfg); +} + + +#ifdef CONFIG_CPU_FREQ + +static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_uart_port *port; + struct uart_port *uport; + + port = container_of(nb, struct s3c24xx_uart_port, freq_transition); + uport = &port->port; + + /* check to see if port is enabled */ + + if (port->pm_level != 0) + return 0; + + /* try and work out if the baudrate is changing, we can detect + * a change in rate, but we do not have support for detecting + * a disturbance in the clock-rate over the change. + */ + + if (IS_ERR(port->clk)) + goto exit; + + if (port->baudclk_rate == clk_get_rate(port->clk)) + goto exit; + + if (val == CPUFREQ_PRECHANGE) { + /* we should really shut the port down whilst the + * frequency change is in progress. */ + + } else if (val == CPUFREQ_POSTCHANGE) { + struct ktermios *termios; + struct tty_struct *tty; + + if (uport->state == NULL) + goto exit; + + tty = uport->state->port.tty; + + if (tty == NULL) + goto exit; + + termios = tty->termios; + + if (termios == NULL) { + printk(KERN_WARNING "%s: no termios?\n", __func__); + goto exit; + } + + s3c24xx_serial_set_termios(uport, termios, NULL); + } + + exit: + return 0; +} + +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; + + return cpufreq_register_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + return 0; +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ +} +#endif + +/* s3c24xx_serial_init_port + * + * initialise a single serial port from the platform device given + */ + +static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, + struct s3c24xx_uart_info *info, + struct platform_device *platdev) +{ + struct uart_port *port = &ourport->port; + struct s3c2410_uartcfg *cfg; + struct resource *res; + int ret; + + dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); + + if (platdev == NULL) + return -ENODEV; + + cfg = s3c24xx_dev_to_cfg(&platdev->dev); + + if (port->mapbase != 0) + return 0; + + if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { + printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, + cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); + return -ERANGE; + } + + /* setup info for port */ + port->dev = &platdev->dev; + ourport->info = info; + + /* copy the info in from provided structure */ + ourport->port.fifosize = info->fifosize; + + dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); + + port->uartclk = 1; + + if (cfg->uart_flags & UPF_CONS_FLOW) { + dbg("s3c24xx_serial_init_port: enabling flow control\n"); + port->flags |= UPF_CONS_FLOW; + } + + /* sort our the physical and virtual addresses for each UART */ + + res = platform_get_resource(platdev, IORESOURCE_MEM, 0); + if (res == NULL) { + printk(KERN_ERR "failed to find memory resource for uart\n"); + return -EINVAL; + } + + dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); + + port->mapbase = res->start; + port->membase = S3C_VA_UART + (res->start & 0xfffff); + ret = platform_get_irq(platdev, 0); + if (ret < 0) + port->irq = 0; + else { + port->irq = ret; + ourport->rx_irq = ret; + ourport->tx_irq = ret + 1; + } + + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; + + ourport->clk = clk_get(&platdev->dev, "uart"); + + dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", + port->mapbase, port->membase, port->irq, + ourport->rx_irq, ourport->tx_irq, port->uartclk); + + /* reset the fifos (and setup the uart) */ + s3c24xx_serial_resetport(port, cfg); + return 0; +} + +static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); +} + +static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + +/* Device driver serial port probe */ + +static int probe_index; + +int s3c24xx_serial_probe(struct platform_device *dev, + struct s3c24xx_uart_info *info) +{ + struct s3c24xx_uart_port *ourport; + int ret; + + dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + + ourport = &s3c24xx_serial_ports[probe_index]; + probe_index++; + + dbg("%s: initialising port %p...\n", __func__, ourport); + + ret = s3c24xx_serial_init_port(ourport, info, dev); + if (ret < 0) + goto probe_err; + + dbg("%s: adding port\n", __func__); + uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); + platform_set_drvdata(dev, &ourport->port); + + ret = device_create_file(&dev->dev, &dev_attr_clock_source); + if (ret < 0) + printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + + ret = s3c24xx_serial_cpufreq_register(ourport); + if (ret < 0) + dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + + return 0; + + probe_err: + return ret; +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); + +int __devexit s3c24xx_serial_remove(struct platform_device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + + if (port) { + s3c24xx_serial_cpufreq_deregister(to_ourport(port)); + device_remove_file(&dev->dev, &dev_attr_clock_source); + uart_remove_one_port(&s3c24xx_uart_drv, port); + } + + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); + +/* UART power management code */ + +#ifdef CONFIG_PM + +static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + + if (port) + uart_suspend_port(&s3c24xx_uart_drv, port); + + return 0; +} + +static int s3c24xx_serial_resume(struct platform_device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (port) { + clk_enable(ourport->clk); + s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); + clk_disable(ourport->clk); + + uart_resume_port(&s3c24xx_uart_drv, port); + } + + return 0; +} +#endif + +int s3c24xx_serial_init(struct platform_driver *drv, + struct s3c24xx_uart_info *info) +{ + dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); + +#ifdef CONFIG_PM + drv->suspend = s3c24xx_serial_suspend; + drv->resume = s3c24xx_serial_resume; +#endif + + return platform_driver_register(drv); +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_init); + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return 0; +} + +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); + +/* Console code */ + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct uart_port *cons_uart; + +static int +s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat, utrstat; + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + /* fifo mode - check amount of data in fifo registers... */ + + ufstat = rd_regl(port, S3C2410_UFSTAT); + return (ufstat & info->tx_fifofull) ? 0 : 1; + } + + /* in non-fifo mode, we go and use the tx buffer empty */ + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; +} + +static void +s3c24xx_serial_console_putchar(struct uart_port *port, int ch) +{ + unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + barrier(); + wr_regb(cons_uart, S3C2410_UTXH, ch); +} + +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); +} + +static void __init +s3c24xx_serial_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + struct s3c24xx_uart_clksrc clksrc; + struct clk *clk; + unsigned int ulcon; + unsigned int ucon; + unsigned int ubrdiv; + unsigned long rate; + + ulcon = rd_regl(port, S3C2410_ULCON); + ucon = rd_regl(port, S3C2410_UCON); + ubrdiv = rd_regl(port, S3C2410_UBRDIV); + + dbg("s3c24xx_serial_get_options: port=%p\n" + "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", + port, ulcon, ucon, ubrdiv); + + if ((ucon & 0xf) != 0) { + /* consider the serial port configured if the tx/rx mode set */ + + switch (ulcon & S3C2410_LCON_CSMASK) { + case S3C2410_LCON_CS5: + *bits = 5; + break; + case S3C2410_LCON_CS6: + *bits = 6; + break; + case S3C2410_LCON_CS7: + *bits = 7; + break; + default: + case S3C2410_LCON_CS8: + *bits = 8; + break; + } + + switch (ulcon & S3C2410_LCON_PMASK) { + case S3C2410_LCON_PEVEN: + *parity = 'e'; + break; + + case S3C2410_LCON_PODD: + *parity = 'o'; + break; + + case S3C2410_LCON_PNONE: + default: + *parity = 'n'; + } + + /* now calculate the baud rate */ + + s3c24xx_serial_getsource(port, &clksrc); + + clk = clk_get(port->dev, clksrc.name); + if (!IS_ERR(clk) && clk != NULL) + rate = clk_get_rate(clk) / clksrc.divisor; + else + rate = 1; + + + *baud = rate / (16 * (ubrdiv + 1)); + dbg("calculated baud %d\n", *baud); + } + +} + +/* s3c24xx_serial_init_ports + * + * initialise the serial ports from the machine provided initialisation + * data. +*/ + +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) +{ + struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; + struct platform_device **platdev_ptr; + int i; + + dbg("s3c24xx_serial_init_ports: initialising ports...\n"); + + platdev_ptr = s3c24xx_uart_devs; + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { + s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); + } + + return 0; +} + +static int __init +s3c24xx_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", + co, co->index, options); + + /* is this a valid port */ + + if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) + co->index = 0; + + port = &s3c24xx_serial_ports[co->index].port; + + /* is the port configured? */ + + if (port->mapbase == 0x0) { + co->index = 0; + port = &s3c24xx_serial_ports[co->index].port; + } + + cons_uart = port; + + dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + s3c24xx_serial_get_options(port, &baud, &parity, &bits); + + dbg("s3c24xx_serial_console_setup: baud %d\n", baud); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/* s3c24xx_serial_initconsole + * + * initialise the console from one of the uart drivers +*/ + +static struct console s3c24xx_serial_console = { + .name = S3C24XX_SERIAL_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = s3c24xx_serial_console_write, + .setup = s3c24xx_serial_console_setup +}; + +int s3c24xx_serial_initconsole(struct platform_driver *drv, + struct s3c24xx_uart_info **info) + +{ + struct platform_device *dev = s3c24xx_uart_devs[0]; + + dbg("s3c24xx_serial_initconsole\n"); + + /* select driver based on the cpu */ + + if (dev == NULL) { + printk(KERN_ERR "s3c24xx: no devices for console init\n"); + return 0; + } + + if (strcmp(dev->name, drv->driver.name) != 0) + return 0; + + s3c24xx_serial_console.data = &s3c24xx_uart_drv; + s3c24xx_serial_init_ports(info); + + register_console(&s3c24xx_serial_console); + return 0; +} + +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ + +MODULE_DESCRIPTION("Samsung SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h new file mode 100644 index 0000000..0ac06a0 --- /dev/null +++ b/drivers/tty/serial/samsung.h @@ -0,0 +1,120 @@ +/* linux/drivers/serial/samsung.h + * + * Driver for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c24xx_uart_info { + char *name; + unsigned int type; + unsigned int fifosize; + unsigned long rx_fifomask; + unsigned long rx_fifoshift; + unsigned long rx_fifofull; + unsigned long tx_fifomask; + unsigned long tx_fifoshift; + unsigned long tx_fifofull; + + /* uart port features */ + + unsigned int has_divslot:1; + + /* clock source control */ + + int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + + /* uart controls */ + int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); +}; + +struct s3c24xx_uart_port { + unsigned char rx_claimed; + unsigned char tx_claimed; + unsigned int pm_level; + unsigned long baudclk_rate; + + unsigned int rx_irq; + unsigned int tx_irq; + + struct s3c24xx_uart_info *info; + struct s3c24xx_uart_clksrc *clksrc; + struct clk *clk; + struct clk *baudclk; + struct uart_port port; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif +}; + +/* conversion functions */ + +#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) +#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) + +/* register access controls */ + +#define portaddr(port, reg) ((port)->membase + (reg)) + +#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) +#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) + +#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) +#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) + +extern int s3c24xx_serial_probe(struct platform_device *dev, + struct s3c24xx_uart_info *uart); + +extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); + +extern int s3c24xx_serial_initconsole(struct platform_driver *drv, + struct s3c24xx_uart_info **uart); + +extern int s3c24xx_serial_init(struct platform_driver *drv, + struct s3c24xx_uart_info *info); + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +#define s3c24xx_console_init(__drv, __inf) \ +static int __init s3c_serial_console_init(void) \ +{ \ + struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ + int i; \ + \ + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ + uinfo[i] = __inf; \ + return s3c24xx_serial_initconsole(__drv, uinfo); \ +} \ + \ +console_initcall(s3c_serial_console_init) + +#else +#define s3c24xx_console_init(drv, inf) extern void no_console(void) +#endif + +#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG + +extern void printascii(const char *); + +static void dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +#else +#define dbg(x...) do { } while (0) +#endif diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c new file mode 100644 index 0000000..a2f2b32 --- /dev/null +++ b/drivers/tty/serial/sb1250-duart.c @@ -0,0 +1,976 @@ +/* + * drivers/serial/sb1250-duart.c + * + * Support for the asynchronous serial interface (DUART) included + * in the BCM1250 and derived System-On-a-Chip (SOC) devices. + * + * Copyright (c) 2007 Maciej W. Rozycki + * + * Derived from drivers/char/sb1250_duart.c for which the following + * copyright applies: + * + * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * References: + * + * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation + */ + +#if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include +#include + +#define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) +#define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) + +#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING + +#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) +#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) +#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) + +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#include +#include + +#define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) +#define SBD_INT(line) (K_INT_UART_0 + (line)) + +#else +#error invalid SB1250 UART configuration + +#endif + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); +MODULE_LICENSE("GPL"); + + +#define DUART_MAX_CHIP 2 +#define DUART_MAX_SIDE 2 + +/* + * Per-port state. + */ +struct sbd_port { + struct sbd_duart *duart; + struct uart_port port; + unsigned char __iomem *memctrl; + int tx_stopped; + int initialised; +}; + +/* + * Per-DUART state for the shared register space. + */ +struct sbd_duart { + struct sbd_port sport[2]; + unsigned long mapctrl; + atomic_t map_guard; +}; + +#define to_sport(uport) container_of(uport, struct sbd_port, port) + +static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; + + +/* + * Reading and writing SB1250 DUART registers. + * + * There are three register spaces: two per-channel ones and + * a shared one. We have to define accessors appropriately. + * All registers are 64-bit and all but the Baud Rate Clock + * registers only define 8 least significant bits. There is + * also a workaround to take into account. Raw accessors use + * the full register width, but cooked ones truncate it + * intentionally so that the rest of the driver does not care. + */ +static u64 __read_sbdchn(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->port.membase + reg; + + return __raw_readq(csr); +} + +static u64 __read_sbdshr(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->memctrl + reg; + + return __raw_readq(csr); +} + +static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->port.membase + reg; + + __raw_writeq(value, csr); +} + +static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->memctrl + reg; + + __raw_writeq(value, csr); +} + +/* + * In bug 1956, we get glitches that can mess up uart registers. This + * "read-mode-reg after any register access" is an accepted workaround. + */ +static void __war_sbd1956(struct sbd_port *sport) +{ + __read_sbdchn(sport, R_DUART_MODE_REG_1); + __read_sbdchn(sport, R_DUART_MODE_REG_2); +} + +static unsigned char read_sbdchn(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdchn(sport, reg); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); + return retval; +} + +static unsigned char read_sbdshr(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdshr(sport, reg); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); + return retval; +} + +static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdchn(sport, reg, value); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); +} + +static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdshr(sport, reg, value); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); +} + + +static int sbd_receive_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; +} + +static int sbd_receive_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (sbd_receive_ready(sport) && --loops) + read_sbdchn(sport, R_DUART_RX_HOLD); + return loops; +} + +static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; +} + +static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_ready(sport) && --loops) + udelay(2); + return loops; +} + +static int sbd_transmit_empty(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; +} + +static int sbd_line_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_empty(sport) && --loops) + udelay(2); + return loops; +} + + +static unsigned int sbd_tx_empty(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; +} + +static unsigned int sbd_get_mctrl(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mctrl, status; + + status = read_sbdshr(sport, R_DUART_IN_PORT); + status >>= (uport->line) % 2; + mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | + (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | + (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | + (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); + return mctrl; +} + +static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int clr = 0, set = 0, mode2; + + if (mctrl & TIOCM_DTR) + set |= M_DUART_SET_OPR2; + else + clr |= M_DUART_CLR_OPR2; + if (mctrl & TIOCM_RTS) + set |= M_DUART_SET_OPR0; + else + clr |= M_DUART_CLR_OPR0; + clr <<= (uport->line) % 2; + set <<= (uport->line) % 2; + + mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); + mode2 &= ~M_DUART_CHAN_MODE; + if (mctrl & TIOCM_LOOP) + mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; + else + mode2 |= V_DUART_CHAN_MODE_NORMAL; + + write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); + write_sbdshr(sport, R_DUART_SET_OPR, set); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); +} + +static void sbd_stop_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + sport->tx_stopped = 1; +}; + +static void sbd_start_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mask; + + /* Enable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask |= M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + + /* Go!, go!, go!... */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + sport->tx_stopped = 0; +}; + +static void sbd_stop_rx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); +}; + +static void sbd_enable_ms(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_AUXCTL_X, + M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); +} + +static void sbd_break_ctl(struct uart_port *uport, int break_state) +{ + struct sbd_port *sport = to_sport(uport); + + if (break_state == -1) + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); + else + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); +} + + +static void sbd_receive_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct uart_icount *icount; + unsigned int status, ch, flag; + int count; + + for (count = 16; count; count--) { + status = read_sbdchn(sport, R_DUART_STATUS); + if (!(status & M_DUART_RX_RDY)) + break; + + ch = read_sbdchn(sport, R_DUART_RX_HOLD); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & + (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | + M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { + if (status & M_DUART_RCVD_BRK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & M_DUART_FRM_ERR) + icount->frame++; + else if (status & M_DUART_PARITY_ERR) + icount->parity++; + if (status & M_DUART_OVRUN_ERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & M_DUART_RCVD_BRK) + flag = TTY_BREAK; + else if (status & M_DUART_FRM_ERR) + flag = TTY_FRAME; + else if (status & M_DUART_PARITY_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); + } + + tty_flip_buffer_push(uport->state->port.tty); +} + +static void sbd_transmit_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned int mask; + int stop_tx; + + /* XON/XOFF chars. */ + if (sport->port.x_char) { + write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); + + /* Send char. */ + if (!stop_tx) { + write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + } + + /* Are we are done? */ + if (stop_tx || uart_circ_empty(xmit)) { + /* Disable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask &= ~M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + } +} + +static void sbd_status_handle(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + unsigned int delta; + + delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + delta >>= (uport->line) % 2; + + if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) + uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); + + if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) + uport->icount.dsr++; + + if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << + S_DUART_IN_PIN_CHNG)) + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +static irqreturn_t sbd_interrupt(int irq, void *dev_id) +{ + struct sbd_port *sport = dev_id; + struct uart_port *uport = &sport->port; + irqreturn_t status = IRQ_NONE; + unsigned int intstat; + int count; + + for (count = 16; count; count--) { + intstat = read_sbdshr(sport, + R_DUART_ISRREG((uport->line) % 2)); + intstat &= read_sbdshr(sport, + R_DUART_IMRREG((uport->line) % 2)); + intstat &= M_DUART_ISR_ALL; + if (!intstat) + break; + + if (intstat & M_DUART_ISR_RX) + sbd_receive_chars(sport); + if (intstat & M_DUART_ISR_IN) + sbd_status_handle(sport); + if (intstat & M_DUART_ISR_TX) + sbd_transmit_chars(sport); + + status = IRQ_HANDLED; + } + + return status; +} + + +static int sbd_startup(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1; + int ret; + + ret = request_irq(sport->port.irq, sbd_interrupt, + IRQF_SHARED, "sb1250-duart", sport); + if (ret) + return ret; + + /* Clear the receive FIFO. */ + sbd_receive_drain(sport); + + /* Clear the interrupt registers. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); + read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + + /* Set rx/tx interrupt to FIFO available. */ + mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); + mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); + + /* Disable tx, enable rx. */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); + sport->tx_stopped = 1; + + /* Enable interrupts. */ + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + M_DUART_IMR_IN | M_DUART_IMR_RX); + + return 0; +} + +static void sbd_shutdown(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + sport->tx_stopped = 1; + free_irq(sport->port.irq, sport); +} + + +static void sbd_init_port(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + + if (sport->initialised) + return; + + /* There is no DUART reset feature, so just set some sane defaults. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); + write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); + write_sbdchn(sport, R_DUART_MODE_REG_2, 0); + write_sbdchn(sport, R_DUART_FULL_CTL, + V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); + write_sbdchn(sport, R_DUART_OPCR_X, 0); + write_sbdchn(sport, R_DUART_AUXCTL_X, 0); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); + + sport->initialised = 1; +} + +static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1 = 0, mode2 = 0, aux = 0; + unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; + unsigned int oldmode1, oldmode2, oldaux; + unsigned int baud, brg; + unsigned int command; + + mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | + M_DUART_BITS_PER_CHAR); + mode2mask |= ~M_DUART_STOP_BIT_LEN_2; + auxmask |= ~M_DUART_CTS_CHNG_ENA; + + /* Byte size. */ + switch (termios->c_cflag & CSIZE) { + case CS5: + case CS6: + /* Unsupported, leave unchanged. */ + mode1mask |= M_DUART_PARITY_MODE; + break; + case CS7: + mode1 |= V_DUART_BITS_PER_CHAR_7; + break; + case CS8: + default: + mode1 |= V_DUART_BITS_PER_CHAR_8; + break; + } + + /* Parity and stop bits. */ + if (termios->c_cflag & CSTOPB) + mode2 |= M_DUART_STOP_BIT_LEN_2; + else + mode2 |= M_DUART_STOP_BIT_LEN_1; + if (termios->c_cflag & PARENB) + mode1 |= V_DUART_PARITY_MODE_ADD; + else + mode1 |= V_DUART_PARITY_MODE_NONE; + if (termios->c_cflag & PARODD) + mode1 |= M_DUART_PARITY_TYPE_ODD; + else + mode1 |= M_DUART_PARITY_TYPE_EVEN; + + baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); + brg = V_DUART_BAUD_RATE(baud); + /* The actual lower bound is 1221bps, so compensate. */ + if (brg > M_DUART_CLK_COUNTER) + brg = M_DUART_CLK_COUNTER; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = M_DUART_OVRUN_ERR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + uport->read_status_mask |= M_DUART_RCVD_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= M_DUART_RCVD_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_OVRUN_ERR; + } + + if (termios->c_cflag & CREAD) + command = M_DUART_RX_EN; + else + command = M_DUART_RX_DIS; + + if (termios->c_cflag & CRTSCTS) + aux |= M_DUART_CTS_CHNG_ENA; + else + aux &= ~M_DUART_CTS_CHNG_ENA; + + spin_lock(&uport->lock); + + if (sport->tx_stopped) + command |= M_DUART_TX_DIS; + else + command |= M_DUART_TX_EN; + + oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; + oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; + oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; + + if (!sport->tx_stopped) + sbd_line_drain(sport); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); + write_sbdchn(sport, R_DUART_CLK_SEL, brg); + write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); + + write_sbdchn(sport, R_DUART_CMD, command); + + spin_unlock(&uport->lock); +} + + +static const char *sbd_type(struct uart_port *uport) +{ + return "SB1250 DUART"; +} + +static void sbd_release_port(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + int map_guard; + + iounmap(sport->memctrl); + sport->memctrl = NULL; + iounmap(uport->membase); + uport->membase = NULL; + + map_guard = atomic_add_return(-1, &duart->map_guard); + if (!map_guard) + release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); +} + +static int sbd_map_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + DUART_CHANREG_SPACING); + if (!uport->membase) { + printk(err); + return -ENOMEM; + } + + if (!sport->memctrl) + sport->memctrl = ioremap_nocache(duart->mapctrl, + DUART_CHANREG_SPACING); + if (!sport->memctrl) { + printk(err); + iounmap(uport->membase); + uport->membase = NULL; + return -ENOMEM; + } + + return 0; +} + +static int sbd_request_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; + struct sbd_duart *duart = to_sport(uport)->duart; + int map_guard; + int ret = 0; + + if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, + "sb1250-duart")) { + printk(err); + return -EBUSY; + } + map_guard = atomic_add_return(1, &duart->map_guard); + if (map_guard == 1) { + if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, + "sb1250-duart")) { + atomic_add(-1, &duart->map_guard); + printk(err); + ret = -EBUSY; + } + } + if (!ret) { + ret = sbd_map_port(uport); + if (ret) { + map_guard = atomic_add_return(-1, &duart->map_guard); + if (!map_guard) + release_mem_region(duart->mapctrl, + DUART_CHANREG_SPACING); + } + } + if (ret) { + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); + return ret; + } + return 0; +} + +static void sbd_config_port(struct uart_port *uport, int flags) +{ + struct sbd_port *sport = to_sport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (sbd_request_port(uport)) + return; + + uport->type = PORT_SB1250_DUART; + + sbd_init_port(sport); + } +} + +static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / 16) + ret = -EINVAL; + return ret; +} + + +static const struct uart_ops sbd_ops = { + .tx_empty = sbd_tx_empty, + .set_mctrl = sbd_set_mctrl, + .get_mctrl = sbd_get_mctrl, + .stop_tx = sbd_stop_tx, + .start_tx = sbd_start_tx, + .stop_rx = sbd_stop_rx, + .enable_ms = sbd_enable_ms, + .break_ctl = sbd_break_ctl, + .startup = sbd_startup, + .shutdown = sbd_shutdown, + .set_termios = sbd_set_termios, + .type = sbd_type, + .release_port = sbd_release_port, + .request_port = sbd_request_port, + .config_port = sbd_config_port, + .verify_port = sbd_verify_port, +}; + +/* Initialize SB1250 DUART port structures. */ +static void __init sbd_probe_duarts(void) +{ + static int probed; + int chip, side; + int max_lines, line; + + if (probed) + return; + + /* Set the number of available units based on the SOC type. */ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1x55: + case K_SYS_SOC_TYPE_BCM1x80: + max_lines = 4; + break; + default: + /* Assume at least two serial ports at the normal address. */ + max_lines = 2; + break; + } + + probed = 1; + + for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; + chip++) { + sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); + + for (side = 0; side < DUART_MAX_SIDE && line < max_lines; + side++, line++) { + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + + sport->duart = &sbd_duarts[chip]; + + uport->irq = SBD_INT(line); + uport->uartclk = 100000000 / 20 * 16; + uport->fifosize = 16; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &sbd_ops; + uport->line = line; + uport->mapbase = SBD_CHANREGS(line); + } + } +} + + +#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE +/* + * Serial console stuff. Very basic, polling driver for doing serial + * console output. The console_sem is held by the caller, so we + * shouldn't be interrupted for more console activity. + */ +static void sbd_console_putchar(struct uart_port *uport, int ch) +{ + struct sbd_port *sport = to_sport(uport); + + sbd_transmit_drain(sport); + write_sbdchn(sport, R_DUART_TX_HOLD, ch); +} + +static void sbd_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + unsigned long flags; + unsigned int mask; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&uport->lock, flags); + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + mask & ~M_DUART_IMR_TX); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + spin_unlock_irqrestore(&uport->lock, flags); + + uart_console_write(&sport->port, s, count, sbd_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&uport->lock, flags); + sbd_line_drain(sport); + if (sport->tx_stopped) + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int __init sbd_console_setup(struct console *co, char *options) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (!sport->duart) + return -ENXIO; + + ret = sbd_map_port(uport); + if (ret) + return ret; + + sbd_init_port(sport); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver sbd_reg; +static struct console sbd_console = { + .name = "duart", + .write = sbd_console_write, + .device = uart_console_device, + .setup = sbd_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sbd_reg +}; + +static int __init sbd_serial_console_init(void) +{ + sbd_probe_duarts(); + register_console(&sbd_console); + + return 0; +} + +console_initcall(sbd_serial_console_init); + +#define SERIAL_SB1250_DUART_CONSOLE &sbd_console +#else +#define SERIAL_SB1250_DUART_CONSOLE NULL +#endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ + + +static struct uart_driver sbd_reg = { + .owner = THIS_MODULE, + .driver_name = "sb1250_duart", + .dev_name = "duart", + .major = TTY_MAJOR, + .minor = SB1250_DUART_MINOR_BASE, + .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, + .cons = SERIAL_SB1250_DUART_CONSOLE, +}; + +/* Set up the driver and register it. */ +static int __init sbd_init(void) +{ + int i, ret; + + sbd_probe_duarts(); + + ret = uart_register_driver(&sbd_reg); + if (ret) + return ret; + + for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_add_one_port(&sbd_reg, uport); + } + + return 0; +} + +/* Unload the driver. Unregister stuff, get ready to go away. */ +static void __exit sbd_exit(void) +{ + int i; + + for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_remove_one_port(&sbd_reg, uport); + } + + uart_unregister_driver(&sbd_reg); +} + +module_init(sbd_init); +module_exit(sbd_exit); diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c new file mode 100644 index 0000000..75038ad --- /dev/null +++ b/drivers/tty/serial/sc26xx.c @@ -0,0 +1,757 @@ +/* + * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices. + * + * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#define SC26XX_MAJOR 204 +#define SC26XX_MINOR_START 205 +#define SC26XX_NR 2 + +struct uart_sc26xx_port { + struct uart_port port[2]; + u8 dsr_mask[2]; + u8 cts_mask[2]; + u8 dcd_mask[2]; + u8 ri_mask[2]; + u8 dtr_mask[2]; + u8 rts_mask[2]; + u8 imr; +}; + +/* register common to both ports */ +#define RD_ISR 0x14 +#define RD_IPR 0x34 + +#define WR_ACR 0x10 +#define WR_IMR 0x14 +#define WR_OPCR 0x34 +#define WR_OPR_SET 0x38 +#define WR_OPR_CLR 0x3C + +/* access common register */ +#define READ_SC(p, r) readb((p)->membase + RD_##r) +#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r) + +/* register per port */ +#define RD_PORT_MRx 0x00 +#define RD_PORT_SR 0x04 +#define RD_PORT_RHR 0x0c + +#define WR_PORT_MRx 0x00 +#define WR_PORT_CSR 0x04 +#define WR_PORT_CR 0x08 +#define WR_PORT_THR 0x0c + +/* SR bits */ +#define SR_BREAK (1 << 7) +#define SR_FRAME (1 << 6) +#define SR_PARITY (1 << 5) +#define SR_OVERRUN (1 << 4) +#define SR_TXRDY (1 << 2) +#define SR_RXRDY (1 << 0) + +#define CR_RES_MR (1 << 4) +#define CR_RES_RX (2 << 4) +#define CR_RES_TX (3 << 4) +#define CR_STRT_BRK (6 << 4) +#define CR_STOP_BRK (7 << 4) +#define CR_DIS_TX (1 << 3) +#define CR_ENA_TX (1 << 2) +#define CR_DIS_RX (1 << 1) +#define CR_ENA_RX (1 << 0) + +/* ISR bits */ +#define ISR_RXRDYB (1 << 5) +#define ISR_TXRDYB (1 << 4) +#define ISR_RXRDYA (1 << 1) +#define ISR_TXRDYA (1 << 0) + +/* IMR bits */ +#define IMR_RXRDY (1 << 1) +#define IMR_TXRDY (1 << 0) + +/* access port register */ +static inline u8 read_sc_port(struct uart_port *p, u8 reg) +{ + return readb(p->membase + p->line * 0x20 + reg); +} + +static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val) +{ + writeb(val, p->membase + p->line * 0x20 + reg); +} + +#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r) +#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v) + +static void sc26xx_enable_irq(struct uart_port *port, int mask) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + up->imr |= mask << (line * 4); + WRITE_SC(port, IMR, up->imr); +} + +static void sc26xx_disable_irq(struct uart_port *port, int mask) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + up->imr &= ~(mask << (line * 4)); + WRITE_SC(port, IMR, up->imr); +} + +static struct tty_struct *receive_chars(struct uart_port *port) +{ + struct tty_struct *tty = NULL; + int limit = 10000; + unsigned char ch; + char flag; + u8 status; + + if (port->state != NULL) /* Unopened serial console */ + tty = port->state->port.tty; + + while (limit-- > 0) { + status = READ_SC_PORT(port, SR); + if (!(status & SR_RXRDY)) + break; + ch = READ_SC_PORT(port, RHR); + + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(status & (SR_BREAK | SR_FRAME | + SR_PARITY | SR_OVERRUN))) { + if (status & SR_BREAK) { + status &= ~(SR_PARITY | SR_FRAME); + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & SR_PARITY) + port->icount.parity++; + else if (status & SR_FRAME) + port->icount.frame++; + if (status & SR_OVERRUN) + port->icount.overrun++; + + status &= port->read_status_mask; + if (status & SR_BREAK) + flag = TTY_BREAK; + else if (status & SR_PARITY) + flag = TTY_PARITY; + else if (status & SR_FRAME) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (status & port->ignore_status_mask) + continue; + + tty_insert_flip_char(tty, ch, flag); + } + return tty; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->state) + return; + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sc26xx_disable_irq(port, IMR_TXRDY); + return; + } + while (!uart_circ_empty(xmit)) { + if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) + break; + + WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sc26xx_interrupt(int irq, void *dev_id) +{ + struct uart_sc26xx_port *up = dev_id; + struct tty_struct *tty; + unsigned long flags; + u8 isr; + + spin_lock_irqsave(&up->port[0].lock, flags); + + tty = NULL; + isr = READ_SC(&up->port[0], ISR); + if (isr & ISR_TXRDYA) + transmit_chars(&up->port[0]); + if (isr & ISR_RXRDYA) + tty = receive_chars(&up->port[0]); + + spin_unlock(&up->port[0].lock); + + if (tty) + tty_flip_buffer_push(tty); + + spin_lock(&up->port[1].lock); + + tty = NULL; + if (isr & ISR_TXRDYB) + transmit_chars(&up->port[1]); + if (isr & ISR_RXRDYB) + tty = receive_chars(&up->port[1]); + + spin_unlock_irqrestore(&up->port[1].lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sc26xx_tx_empty(struct uart_port *port) +{ + return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0; +} + +/* port->lock held by caller. */ +static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + if (up->dtr_mask[line]) { + if (mctrl & TIOCM_DTR) + WRITE_SC(port, OPR_SET, up->dtr_mask[line]); + else + WRITE_SC(port, OPR_CLR, up->dtr_mask[line]); + } + if (up->rts_mask[line]) { + if (mctrl & TIOCM_RTS) + WRITE_SC(port, OPR_SET, up->rts_mask[line]); + else + WRITE_SC(port, OPR_CLR, up->rts_mask[line]); + } +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sc26xx_get_mctrl(struct uart_port *port) +{ + struct uart_sc26xx_port *up; + int line = port->line; + unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; + u8 ipr; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + ipr = READ_SC(port, IPR) ^ 0xff; + + if (up->dsr_mask[line]) { + mctrl &= ~TIOCM_DSR; + mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0; + } + if (up->cts_mask[line]) { + mctrl &= ~TIOCM_CTS; + mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0; + } + if (up->dcd_mask[line]) { + mctrl &= ~TIOCM_CAR; + mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0; + } + if (up->ri_mask[line]) { + mctrl &= ~TIOCM_RNG; + mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0; + } + return mctrl; +} + +/* port->lock held by caller. */ +static void sc26xx_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sc26xx_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!uart_circ_empty(xmit)) { + if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) { + sc26xx_enable_irq(port, IMR_TXRDY); + break; + } + WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +/* port->lock held by caller. */ +static void sc26xx_stop_rx(struct uart_port *port) +{ +} + +/* port->lock held by caller. */ +static void sc26xx_enable_ms(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sc26xx_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state == -1) + WRITE_SC_PORT(port, CR, CR_STRT_BRK); + else + WRITE_SC_PORT(port, CR, CR_STOP_BRK); +} + +/* port->lock is not held. */ +static int sc26xx_startup(struct uart_port *port) +{ + sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + WRITE_SC(port, OPCR, 0); + + /* reset tx and rx */ + WRITE_SC_PORT(port, CR, CR_RES_RX); + WRITE_SC_PORT(port, CR, CR_RES_TX); + + /* start rx/tx */ + WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); + + /* enable irqs */ + sc26xx_enable_irq(port, IMR_RXRDY); + return 0; +} + +/* port->lock is not held. */ +static void sc26xx_shutdown(struct uart_port *port) +{ + /* disable interrupst */ + sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + + /* stop tx/rx */ + WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); +} + +/* port->lock is not held. */ +static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + u8 mr1, mr2, csr; + + spin_lock_irqsave(&port->lock, flags); + + while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) + udelay(2); + + WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->read_status_mask = SR_OVERRUN; + if (iflag & INPCK) + port->read_status_mask |= SR_PARITY | SR_FRAME; + if (iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BREAK; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= SR_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= SR_BREAK | SR_FRAME | + SR_PARITY | SR_OVERRUN; + + switch (cflag & CSIZE) { + case CS5: + mr1 = 0x00; + break; + case CS6: + mr1 = 0x01; + break; + case CS7: + mr1 = 0x02; + break; + default: + case CS8: + mr1 = 0x03; + break; + } + mr2 = 0x07; + if (cflag & CSTOPB) + mr2 = 0x0f; + if (cflag & PARENB) { + if (cflag & PARODD) + mr1 |= (1 << 2); + } else + mr1 |= (2 << 3); + + switch (baud) { + case 50: + csr = 0x00; + break; + case 110: + csr = 0x11; + break; + case 134: + csr = 0x22; + break; + case 200: + csr = 0x33; + break; + case 300: + csr = 0x44; + break; + case 600: + csr = 0x55; + break; + case 1200: + csr = 0x66; + break; + case 2400: + csr = 0x88; + break; + case 4800: + csr = 0x99; + break; + default: + case 9600: + csr = 0xbb; + break; + case 19200: + csr = 0xcc; + break; + } + + WRITE_SC_PORT(port, CR, CR_RES_MR); + WRITE_SC_PORT(port, MRx, mr1); + WRITE_SC_PORT(port, MRx, mr2); + + WRITE_SC(port, ACR, 0x80); + WRITE_SC_PORT(port, CSR, csr); + + /* reset tx and rx */ + WRITE_SC_PORT(port, CR, CR_RES_RX); + WRITE_SC_PORT(port, CR, CR_RES_TX); + + WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); + while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) + udelay(2); + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sc26xx_type(struct uart_port *port) +{ + return "SC26XX"; +} + +static void sc26xx_release_port(struct uart_port *port) +{ +} + +static int sc26xx_request_port(struct uart_port *port) +{ + return 0; +} + +static void sc26xx_config_port(struct uart_port *port, int flags) +{ +} + +static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sc26xx_ops = { + .tx_empty = sc26xx_tx_empty, + .set_mctrl = sc26xx_set_mctrl, + .get_mctrl = sc26xx_get_mctrl, + .stop_tx = sc26xx_stop_tx, + .start_tx = sc26xx_start_tx, + .stop_rx = sc26xx_stop_rx, + .enable_ms = sc26xx_enable_ms, + .break_ctl = sc26xx_break_ctl, + .startup = sc26xx_startup, + .shutdown = sc26xx_shutdown, + .set_termios = sc26xx_set_termios, + .type = sc26xx_type, + .release_port = sc26xx_release_port, + .request_port = sc26xx_request_port, + .config_port = sc26xx_config_port, + .verify_port = sc26xx_verify_port, +}; + +static struct uart_port *sc26xx_port; + +#ifdef CONFIG_SERIAL_SC26XX_CONSOLE +static void sc26xx_console_putchar(struct uart_port *port, char c) +{ + unsigned long flags; + int limit = 1000000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + if (READ_SC_PORT(port, SR) & SR_TXRDY) { + WRITE_SC_PORT(port, THR, c); + break; + } + udelay(2); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sc26xx_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sc26xx_port; + int i; + + for (i = 0; i < n; i++) { + if (*s == '\n') + sc26xx_console_putchar(port, '\r'); + sc26xx_console_putchar(port, *s++); + } +} + +static int __init sc26xx_console_setup(struct console *con, char *options) +{ + struct uart_port *port = sc26xx_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (port->type != PORT_SC26XX) + return -1; + + printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index); + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver sc26xx_reg; +static struct console sc26xx_console = { + .name = "ttySC", + .write = sc26xx_console_write, + .device = uart_console_device, + .setup = sc26xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sc26xx_reg, +}; +#define SC26XX_CONSOLE &sc26xx_console +#else +#define SC26XX_CONSOLE NULL +#endif + +static struct uart_driver sc26xx_reg = { + .owner = THIS_MODULE, + .driver_name = "SC26xx", + .dev_name = "ttySC", + .major = SC26XX_MAJOR, + .minor = SC26XX_MINOR_START, + .nr = SC26XX_NR, + .cons = SC26XX_CONSOLE, +}; + +static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) +{ + unsigned int bit = (flags >> bitpos) & 15; + + return bit ? (1 << (bit - 1)) : 0; +} + +static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, + int line, unsigned int data) +{ + up->dtr_mask[line] = sc26xx_flags2mask(data, 0); + up->rts_mask[line] = sc26xx_flags2mask(data, 4); + up->dsr_mask[line] = sc26xx_flags2mask(data, 8); + up->cts_mask[line] = sc26xx_flags2mask(data, 12); + up->dcd_mask[line] = sc26xx_flags2mask(data, 16); + up->ri_mask[line] = sc26xx_flags2mask(data, 20); +} + +static int __devinit sc26xx_probe(struct platform_device *dev) +{ + struct resource *res; + struct uart_sc26xx_port *up; + unsigned int *sc26xx_data = dev->dev.platform_data; + int err; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + up = kzalloc(sizeof *up, GFP_KERNEL); + if (unlikely(!up)) + return -ENOMEM; + + up->port[0].line = 0; + up->port[0].ops = &sc26xx_ops; + up->port[0].type = PORT_SC26XX; + up->port[0].uartclk = (29491200 / 16); /* arbitrary */ + + up->port[0].mapbase = res->start; + up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40); + up->port[0].iotype = UPIO_MEM; + up->port[0].irq = platform_get_irq(dev, 0); + + up->port[0].dev = &dev->dev; + + sc26xx_init_masks(up, 0, sc26xx_data[0]); + + sc26xx_port = &up->port[0]; + + up->port[1].line = 1; + up->port[1].ops = &sc26xx_ops; + up->port[1].type = PORT_SC26XX; + up->port[1].uartclk = (29491200 / 16); /* arbitrary */ + + up->port[1].mapbase = up->port[0].mapbase; + up->port[1].membase = up->port[0].membase; + up->port[1].iotype = UPIO_MEM; + up->port[1].irq = up->port[0].irq; + + up->port[1].dev = &dev->dev; + + sc26xx_init_masks(up, 1, sc26xx_data[1]); + + err = uart_register_driver(&sc26xx_reg); + if (err) + goto out_free_port; + + sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor; + + err = uart_add_one_port(&sc26xx_reg, &up->port[0]); + if (err) + goto out_unregister_driver; + + err = uart_add_one_port(&sc26xx_reg, &up->port[1]); + if (err) + goto out_remove_port0; + + err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up); + if (err) + goto out_remove_ports; + + dev_set_drvdata(&dev->dev, up); + return 0; + +out_remove_ports: + uart_remove_one_port(&sc26xx_reg, &up->port[1]); +out_remove_port0: + uart_remove_one_port(&sc26xx_reg, &up->port[0]); + +out_unregister_driver: + uart_unregister_driver(&sc26xx_reg); + +out_free_port: + kfree(up); + sc26xx_port = NULL; + return err; +} + + +static int __exit sc26xx_driver_remove(struct platform_device *dev) +{ + struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev); + + free_irq(up->port[0].irq, up); + + uart_remove_one_port(&sc26xx_reg, &up->port[0]); + uart_remove_one_port(&sc26xx_reg, &up->port[1]); + + uart_unregister_driver(&sc26xx_reg); + + kfree(up); + sc26xx_port = NULL; + + dev_set_drvdata(&dev->dev, NULL); + return 0; +} + +static struct platform_driver sc26xx_driver = { + .probe = sc26xx_probe, + .remove = __devexit_p(sc26xx_driver_remove), + .driver = { + .name = "SC26xx", + .owner = THIS_MODULE, + }, +}; + +static int __init sc26xx_init(void) +{ + return platform_driver_register(&sc26xx_driver); +} + +static void __exit sc26xx_exit(void) +{ + platform_driver_unregister(&sc26xx_driver); +} + +module_init(sc26xx_init); +module_exit(sc26xx_exit); + + +MODULE_AUTHOR("Thomas Bogendörfer"); +MODULE_DESCRIPTION("SC681/SC2692 serial driver"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c new file mode 100644 index 0000000..460a72d --- /dev/null +++ b/drivers/tty/serial/serial_core.c @@ -0,0 +1,2578 @@ +/* + * linux/drivers/char/core.c + * + * Driver core for serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for serial_state and serial_icounter_struct */ +#include +#include +#include + +#include +#include + +/* + * This is used to lock changes in serial line configuration. + */ +static DEFINE_MUTEX(port_mutex); + +/* + * lockdep: port->lock is initialized in two places, but we + * want only one lock-class: + */ +static struct lock_class_key port_lock_key; + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios); +static void __uart_wait_until_sent(struct uart_port *port, int timeout); +static void uart_change_pm(struct uart_state *state, int pm_state); + +/* + * This routine is used by the interrupt handler to schedule processing in + * the software interrupt portion of the driver. + */ +void uart_write_wakeup(struct uart_port *port) +{ + struct uart_state *state = port->state; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + BUG_ON(!state); + tasklet_schedule(&state->tlet); +} + +static void uart_stop(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + if (!uart_circ_empty(&state->xmit) && state->xmit.buf && + !tty->stopped && !tty->hw_stopped) + port->ops->start_tx(port); +} + +static void uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __uart_start(tty); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void uart_tasklet_action(unsigned long data) +{ + struct uart_state *state = (struct uart_state *)data; + tty_wakeup(state->port.tty); +} + +static inline void +uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) +{ + unsigned long flags; + unsigned int old; + + spin_lock_irqsave(&port->lock, flags); + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl) + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); +} + +#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) +#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) + +/* + * Startup the port. This will be called once per open. All calls + * will be serialised by the per-port mutex. + */ +static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + unsigned long page; + int retval = 0; + + if (port->flags & ASYNC_INITIALIZED) + return 0; + + /* + * Set the TTY IO error marker - we will only clear this + * once we have successfully opened the port. Also set + * up the tty->alt_speed kludge + */ + set_bit(TTY_IO_ERROR, &tty->flags); + + if (uport->type == PORT_UNKNOWN) + return 0; + + /* + * Initialise and allocate the transmit and temporary + * buffer. + */ + if (!state->xmit.buf) { + /* This is protected by the per port mutex */ + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + state->xmit.buf = (unsigned char *) page; + uart_circ_clear(&state->xmit); + } + + retval = uport->ops->startup(uport); + if (retval == 0) { + if (init_hw) { + /* + * Initialise the hardware port settings. + */ + uart_change_speed(tty, state, NULL); + + /* + * Setup the RTS and DTR signals once the + * port is open and ready to respond. + */ + if (tty->termios->c_cflag & CBAUD) + uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); + } + + if (port->flags & ASYNC_CTS_FLOW) { + spin_lock_irq(&uport->lock); + if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) + tty->hw_stopped = 1; + spin_unlock_irq(&uport->lock); + } + + set_bit(ASYNCB_INITIALIZED, &port->flags); + + clear_bit(TTY_IO_ERROR, &tty->flags); + } + + if (retval && capable(CAP_SYS_ADMIN)) + retval = 0; + + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. Calls to + * uart_shutdown are serialised by the per-port semaphore. + */ +static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + + /* + * Set the TTY IO error marker + */ + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + + if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { + /* + * Turn off DTR and RTS early. + */ + if (!tty || (tty->termios->c_cflag & HUPCL)) + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&port->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + uport->ops->shutdown(uport); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + synchronize_irq(uport->irq); + } + + /* + * kill off our tasklet + */ + tasklet_kill(&state->tlet); + + /* + * Free the transmit buffer page. + */ + if (state->xmit.buf) { + free_page((unsigned long)state->xmit.buf); + state->xmit.buf = NULL; + } +} + +/** + * uart_update_timeout - update per-port FIFO timeout. + * @port: uart_port structure describing the port + * @cflag: termios cflag value + * @baud: speed of the port + * + * Set the port FIFO timeout value. The @cflag value should + * reflect the actual hardware settings. + */ +void +uart_update_timeout(struct uart_port *port, unsigned int cflag, + unsigned int baud) +{ + unsigned int bits; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + bits = 7; + break; + case CS6: + bits = 8; + break; + case CS7: + bits = 9; + break; + default: + bits = 10; + break; /* CS8 */ + } + + if (cflag & CSTOPB) + bits++; + if (cflag & PARENB) + bits++; + + /* + * The total number of bits to be transmitted in the fifo. + */ + bits = bits * port->fifosize; + + /* + * Figure the timeout to send the above number of bits. + * Add .02 seconds of slop + */ + port->timeout = (HZ * bits) / baud + HZ/50; +} + +EXPORT_SYMBOL(uart_update_timeout); + +/** + * uart_get_baud_rate - return baud rate for a particular port + * @port: uart_port structure describing the port in question. + * @termios: desired termios settings. + * @old: old termios (or NULL) + * @min: minimum acceptable baud rate + * @max: maximum acceptable baud rate + * + * Decode the termios structure into a numeric baud rate, + * taking account of the magic 38400 baud rate (with spd_* + * flags), and mapping the %B0 rate to 9600 baud. + * + * If the new baud rate is invalid, try the old termios setting. + * If it's still invalid, we try 9600 baud. + * + * Update the @termios structure to reflect the baud rate + * we're actually going to be using. Don't do this for the case + * where B0 is requested ("hang up"). + */ +unsigned int +uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old, unsigned int min, unsigned int max) +{ + unsigned int try, baud, altbaud = 38400; + int hung_up = 0; + upf_t flags = port->flags & UPF_SPD_MASK; + + if (flags == UPF_SPD_HI) + altbaud = 57600; + else if (flags == UPF_SPD_VHI) + altbaud = 115200; + else if (flags == UPF_SPD_SHI) + altbaud = 230400; + else if (flags == UPF_SPD_WARP) + altbaud = 460800; + + for (try = 0; try < 2; try++) { + baud = tty_termios_baud_rate(termios); + + /* + * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... + * Die! Die! Die! + */ + if (baud == 38400) + baud = altbaud; + + /* + * Special case: B0 rate. + */ + if (baud == 0) { + hung_up = 1; + baud = 9600; + } + + if (baud >= min && baud <= max) + return baud; + + /* + * Oops, the quotient was zero. Try again with + * the old baud rate if possible. + */ + termios->c_cflag &= ~CBAUD; + if (old) { + baud = tty_termios_baud_rate(old); + if (!hung_up) + tty_termios_encode_baud_rate(termios, + baud, baud); + old = NULL; + continue; + } + + /* + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. + */ + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } + } + /* Should never happen */ + WARN_ON(1); + return 0; +} + +EXPORT_SYMBOL(uart_get_baud_rate); + +/** + * uart_get_divisor - return uart clock divisor + * @port: uart_port structure describing the port. + * @baud: desired baud rate + * + * Calculate the uart clock divisor for the port. + */ +unsigned int +uart_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = (port->uartclk + (8 * baud)) / (16 * baud); + + return quot; +} + +EXPORT_SYMBOL(uart_get_divisor); + +/* FIXME: Consistent locking policy */ +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios) +{ + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + struct ktermios *termios; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) + return; + + termios = tty->termios; + + /* + * Set flags based on termios cflag + */ + if (termios->c_cflag & CRTSCTS) + set_bit(ASYNCB_CTS_FLOW, &port->flags); + else + clear_bit(ASYNCB_CTS_FLOW, &port->flags); + + if (termios->c_cflag & CLOCAL) + clear_bit(ASYNCB_CHECK_CD, &port->flags); + else + set_bit(ASYNCB_CHECK_CD, &port->flags); + + uport->ops->set_termios(uport, termios, old_termios); +} + +static inline int __uart_put_char(struct uart_port *port, + struct circ_buf *circ, unsigned char c) +{ + unsigned long flags; + int ret = 0; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + if (uart_circ_chars_free(circ) != 0) { + circ->buf[circ->head] = c; + circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); + ret = 1; + } + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static int uart_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct uart_state *state = tty->driver_data; + + return __uart_put_char(state->uart_port, &state->xmit, ch); +} + +static void uart_flush_chars(struct tty_struct *tty) +{ + uart_start(tty); +} + +static int uart_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + struct circ_buf *circ; + unsigned long flags; + int c, ret = 0; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return -EL3HLT; + } + + port = state->uart_port; + circ = &state->xmit; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + while (1) { + c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(circ->buf + circ->head, buf, c); + circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + spin_unlock_irqrestore(&port->lock, flags); + + uart_start(tty); + return ret; +} + +static int uart_write_room(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_free(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + return ret; +} + +static int uart_chars_in_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_pending(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + return ret; +} + +static void uart_flush_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return; + } + + port = state->uart_port; + pr_debug("uart_flush_buffer(%d) called\n", tty->index); + + spin_lock_irqsave(&port->lock, flags); + uart_circ_clear(&state->xmit); + if (port->ops->flush_buffer) + port->ops->flush_buffer(port); + spin_unlock_irqrestore(&port->lock, flags); + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void uart_send_xchar(struct tty_struct *tty, char ch) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + if (port->ops->send_xchar) + port->ops->send_xchar(port, ch); + else { + port->x_char = ch; + if (ch) { + spin_lock_irqsave(&port->lock, flags); + port->ops->start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + } + } +} + +static void uart_throttle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + if (I_IXOFF(tty)) + uart_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) + uart_clear_mctrl(state->uart_port, TIOCM_RTS); +} + +static void uart_unthrottle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + if (I_IXOFF(tty)) { + if (port->x_char) + port->x_char = 0; + else + uart_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) + uart_set_mctrl(port, TIOCM_RTS); +} + +static int uart_get_info(struct uart_state *state, + struct serial_struct __user *retinfo) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + + /* Ensure the state we copy is consistent and no hardware changes + occur as we go */ + mutex_lock(&port->mutex); + + tmp.type = uport->type; + tmp.line = uport->line; + tmp.port = uport->iobase; + if (HIGH_BITS_OFFSET) + tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; + tmp.irq = uport->irq; + tmp.flags = uport->flags; + tmp.xmit_fifo_size = uport->fifosize; + tmp.baud_base = uport->uartclk / 16; + tmp.close_delay = port->close_delay / 10; + tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + port->closing_wait / 10; + tmp.custom_divisor = uport->custom_divisor; + tmp.hub6 = uport->hub6; + tmp.io_type = uport->iotype; + tmp.iomem_reg_shift = uport->regshift; + tmp.iomem_base = (void *)(unsigned long)uport->mapbase; + + mutex_unlock(&port->mutex); + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int uart_set_info(struct tty_struct *tty, struct uart_state *state, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + unsigned long new_port; + unsigned int change_irq, change_port, closing_wait; + unsigned int old_custom_divisor, close_delay; + upf_t old_flags, new_flags; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + new_port = new_serial.port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + + new_serial.irq = irq_canonicalize(new_serial.irq); + close_delay = new_serial.close_delay * 10; + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + + /* + * This semaphore protects port->count. It is also + * very useful to prevent opens. Also, take the + * port configuration semaphore to make sure that a + * module insertion/removal doesn't change anything + * under us. + */ + mutex_lock(&port->mutex); + + change_irq = !(uport->flags & UPF_FIXED_PORT) + && new_serial.irq != uport->irq; + + /* + * Since changing the 'type' of the port changes its resource + * allocations, we should treat type changes the same as + * IO port changes. + */ + change_port = !(uport->flags & UPF_FIXED_PORT) + && (new_port != uport->iobase || + (unsigned long)new_serial.iomem_base != uport->mapbase || + new_serial.hub6 != uport->hub6 || + new_serial.io_type != uport->iotype || + new_serial.iomem_reg_shift != uport->regshift || + new_serial.type != uport->type); + + old_flags = uport->flags; + new_flags = new_serial.flags; + old_custom_divisor = uport->custom_divisor; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EPERM; + if (change_irq || change_port || + (new_serial.baud_base != uport->uartclk / 16) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || + (new_serial.xmit_fifo_size && + new_serial.xmit_fifo_size != uport->fifosize) || + (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + goto exit; + uport->flags = ((uport->flags & ~UPF_USR_MASK) | + (new_flags & UPF_USR_MASK)); + uport->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + /* + * Ask the low level driver to verify the settings. + */ + if (uport->ops->verify_port) + retval = uport->ops->verify_port(uport, &new_serial); + + if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || + (new_serial.baud_base < 9600)) + retval = -EINVAL; + + if (retval) + goto exit; + + if (change_port || change_irq) { + retval = -EBUSY; + + /* + * Make sure that we are the sole user of this port. + */ + if (tty_port_users(port) > 1) + goto exit; + + /* + * We need to shutdown the serial port at the old + * port/type/irq combination. + */ + uart_shutdown(tty, state); + } + + if (change_port) { + unsigned long old_iobase, old_mapbase; + unsigned int old_type, old_iotype, old_hub6, old_shift; + + old_iobase = uport->iobase; + old_mapbase = uport->mapbase; + old_type = uport->type; + old_hub6 = uport->hub6; + old_iotype = uport->iotype; + old_shift = uport->regshift; + + /* + * Free and release old regions + */ + if (old_type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + uport->iobase = new_port; + uport->type = new_serial.type; + uport->hub6 = new_serial.hub6; + uport->iotype = new_serial.io_type; + uport->regshift = new_serial.iomem_reg_shift; + uport->mapbase = (unsigned long)new_serial.iomem_base; + + /* + * Claim and map the new regions + */ + if (uport->type != PORT_UNKNOWN) { + retval = uport->ops->request_port(uport); + } else { + /* Always success - Jean II */ + retval = 0; + } + + /* + * If we fail to request resources for the + * new port, try to restore the old settings. + */ + if (retval && old_type != PORT_UNKNOWN) { + uport->iobase = old_iobase; + uport->type = old_type; + uport->hub6 = old_hub6; + uport->iotype = old_iotype; + uport->regshift = old_shift; + uport->mapbase = old_mapbase; + retval = uport->ops->request_port(uport); + /* + * If we failed to restore the old settings, + * we fail like this. + */ + if (retval) + uport->type = PORT_UNKNOWN; + + /* + * We failed anyway. + */ + retval = -EBUSY; + /* Added to return the correct error -Ram Gupta */ + goto exit; + } + } + + if (change_irq) + uport->irq = new_serial.irq; + if (!(uport->flags & UPF_FIXED_PORT)) + uport->uartclk = new_serial.baud_base * 16; + uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | + (new_flags & UPF_CHANGE_MASK); + uport->custom_divisor = new_serial.custom_divisor; + port->close_delay = close_delay; + port->closing_wait = closing_wait; + if (new_serial.xmit_fifo_size) + uport->fifosize = new_serial.xmit_fifo_size; + if (port->tty) + port->tty->low_latency = + (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + retval = 0; + if (uport->type == PORT_UNKNOWN) + goto exit; + if (port->flags & ASYNC_INITIALIZED) { + if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || + old_custom_divisor != uport->custom_divisor) { + /* + * If they're setting up a custom divisor or speed, + * instead of clearing it, then bitch about it. No + * need to rate-limit; it's CAP_SYS_ADMIN only. + */ + if (uport->flags & UPF_SPD_MASK) { + char buf[64]; + printk(KERN_NOTICE + "%s sets custom speed on %s. This " + "is deprecated.\n", current->comm, + tty_name(port->tty, buf)); + } + uart_change_speed(tty, state, NULL); + } + } else + retval = uart_startup(tty, state, 1); + exit: + mutex_unlock(&port->mutex); + return retval; +} + +/** + * uart_get_lsr_info - get line status register info + * @tty: tty associated with the UART + * @state: UART being queried + * @value: returned modem value + * + * Note: uart_ioctl protects us against hangups. + */ +static int uart_get_lsr_info(struct tty_struct *tty, + struct uart_state *state, unsigned int __user *value) +{ + struct uart_port *uport = state->uart_port; + unsigned int result; + + result = uport->ops->tx_empty(uport); + + /* + * If we're about to load something into the transmit + * register, we'll pretend the transmitter isn't empty to + * avoid a race condition (depending on when the transmit + * interrupt happens). + */ + if (uport->x_char || + ((uart_circ_chars_pending(&state->xmit) > 0) && + !tty->stopped && !tty->hw_stopped)) + result &= ~TIOCSER_TEMT; + + return put_user(result, value); +} + +static int uart_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + int result = -EIO; + + mutex_lock(&port->mutex); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + result = uport->mctrl; + + spin_lock_irq(&uport->lock); + result |= uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + } + mutex_unlock(&port->mutex); + + return result; +} + +static int +uart_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + int ret = -EIO; + + mutex_lock(&port->mutex); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + uart_update_mctrl(uport, set, clear); + ret = 0; + } + mutex_unlock(&port->mutex); + return ret; +} + +static int uart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + + mutex_lock(&port->mutex); + + if (uport->type != PORT_UNKNOWN) + uport->ops->break_ctl(uport, break_state); + + mutex_unlock(&port->mutex); + return 0; +} + +static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + int flags, ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* + * Take the per-port semaphore. This prevents count from + * changing, and hence any extra opens of the port while + * we're auto-configuring. + */ + if (mutex_lock_interruptible(&port->mutex)) + return -ERESTARTSYS; + + ret = -EBUSY; + if (tty_port_users(port) == 1) { + uart_shutdown(tty, state); + + /* + * If we already have a port type configured, + * we must release its resources. + */ + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + flags = UART_CONFIG_TYPE; + if (uport->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + + /* + * This will claim the ports resources if + * a port is found. + */ + uport->ops->config_port(uport, flags); + + ret = uart_startup(tty, state, 1); + } + mutex_unlock(&port->mutex); + return ret; +} + +/* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + * + * FIXME: This wants extracting into a common all driver implementation + * of TIOCMWAIT using tty_port. + */ +static int +uart_wait_modem_status(struct uart_state *state, unsigned long arg) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + DECLARE_WAITQUEUE(wait, current); + struct uart_icount cprev, cnow; + int ret; + + /* + * note the counters on entry + */ + spin_lock_irq(&uport->lock); + memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); + + /* + * Force modem status interrupts on + */ + uport->ops->enable_ms(uport); + spin_unlock_irq(&uport->lock); + + add_wait_queue(&port->delta_msr_wait, &wait); + for (;;) { + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + + set_current_state(TASK_INTERRUPTIBLE); + + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + ret = 0; + break; + } + + schedule(); + + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + cprev = cnow; + } + + current->state = TASK_RUNNING; + remove_wait_queue(&port->delta_msr_wait, &wait); + + return ret; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int uart_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct uart_state *state = tty->driver_data; + struct uart_icount cnow; + struct uart_port *uport = state->uart_port; + + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * Called via sys_ioctl. We can use spin_lock_irq() here. + */ +static int +uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + void __user *uarg = (void __user *)arg; + int ret = -ENOIOCTLCMD; + + + /* + * These ioctls don't rely on the hardware to be present. + */ + switch (cmd) { + case TIOCGSERIAL: + ret = uart_get_info(state, uarg); + break; + + case TIOCSSERIAL: + ret = uart_set_info(tty, state, uarg); + break; + + case TIOCSERCONFIG: + ret = uart_do_autoconfig(tty, state); + break; + + case TIOCSERGWILD: /* obsolete */ + case TIOCSERSWILD: /* obsolete */ + ret = 0; + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + if (tty->flags & (1 << TTY_IO_ERROR)) { + ret = -EIO; + goto out; + } + + /* + * The following should only be used when hardware is present. + */ + switch (cmd) { + case TIOCMIWAIT: + ret = uart_wait_modem_status(state, arg); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + mutex_lock(&port->mutex); + + if (tty_hung_up_p(filp)) { + ret = -EIO; + goto out_up; + } + + /* + * All these rely on hardware being present and need to be + * protected against the tty being hung up. + */ + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + ret = uart_get_lsr_info(tty, state, uarg); + break; + + default: { + struct uart_port *uport = state->uart_port; + if (uport->ops->ioctl) + ret = uport->ops->ioctl(uport, cmd, arg); + break; + } + } +out_up: + mutex_unlock(&port->mutex); +out: + return ret; +} + +static void uart_set_ldisc(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport = state->uart_port; + + if (uport->ops->set_ldisc) + uport->ops->set_ldisc(uport, tty->termios->c_line); +} + +static void uart_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios->c_cflag; + + + /* + * These are the bits that are used to setup various + * flags in the low level driver. We can ignore the Bfoo + * bits in c_cflag; c_[io]speed will always be set + * appropriately by set_termios() in tty_ioctl.c + */ +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + if ((cflag ^ old_termios->c_cflag) == 0 && + tty->termios->c_ospeed == old_termios->c_ospeed && + tty->termios->c_ispeed == old_termios->c_ispeed && + RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) { + return; + } + + uart_change_speed(tty, state, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); + /* Handle transition away from B0 status */ + else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + if (!(cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + mask |= TIOCM_RTS; + uart_set_mctrl(state->uart_port, mask); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { + spin_lock_irqsave(&state->uart_port->lock, flags); + tty->hw_stopped = 0; + __uart_start(tty); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + } + /* Handle turning on CRTSCTS */ + else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + spin_lock_irqsave(&state->uart_port->lock, flags); + if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { + tty->hw_stopped = 1; + state->uart_port->ops->stop_tx(state->uart_port); + } + spin_unlock_irqrestore(&state->uart_port->lock, flags); + } +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&state->uart_port.open_wait); +#endif +} + +/* + * In 2.4.5, calls to this will be serialized via the BKL in + * linux/drivers/char/tty_io.c:tty_release() + * linux/drivers/char/tty_io.c:do_tty_handup() + */ +static void uart_close(struct tty_struct *tty, struct file *filp) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port; + struct uart_port *uport; + unsigned long flags; + + BUG_ON(!tty_locked()); + + if (!state) + return; + + uport = state->uart_port; + port = &state->port; + + pr_debug("uart_close(%d) called\n", uport->line); + + mutex_lock(&port->mutex); + spin_lock_irqsave(&port->lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + goto done; + } + + if ((tty->count == 1) && (port->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. port->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " + "port->count is %d\n", port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", + tty->name, port->count); + port->count = 0; + } + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + goto done; + } + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters by + * setting tty->closing. + */ + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + /* + * hack: open-coded tty_wait_until_sent to avoid + * recursive tty_lock + */ + long timeout = msecs_to_jiffies(port->closing_wait); + if (wait_event_interruptible_timeout(tty->write_wait, + !tty_chars_in_buffer(tty), timeout) >= 0) + __uart_wait_until_sent(uport, timeout); + } + + /* + * At this point, we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + if (port->flags & ASYNC_INITIALIZED) { + unsigned long flags; + spin_lock_irqsave(&uport->lock, flags); + uport->ops->stop_rx(uport); + spin_unlock_irqrestore(&uport->lock, flags); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + __uart_wait_until_sent(uport, uport->timeout); + } + + uart_shutdown(tty, state); + uart_flush_buffer(tty); + + tty_ldisc_flush(tty); + + tty_port_tty_set(port, NULL); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) + msleep_interruptible(port->close_delay); + spin_lock_irqsave(&port->lock, flags); + } else if (!uart_console(uport)) { + spin_unlock_irqrestore(&port->lock, flags); + uart_change_pm(state, 3); + spin_lock_irqsave(&port->lock, flags); + } + + /* + * Wake up anyone trying to open this port. + */ + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + +done: + mutex_unlock(&port->mutex); +} + +static void __uart_wait_until_sent(struct uart_port *port, int timeout) +{ + unsigned long char_time, expire; + + if (port->type == PORT_UNKNOWN || port->fifosize == 0) + return; + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (port->timeout - HZ/50) / port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than port->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*port->timeout. + */ + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + + expire = jiffies + timeout; + + pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", + port->line, jiffies, expire); + + /* + * Check whether the transmitter is empty every 'char_time'. + * 'timeout' / 'expire' give us the maximum amount of time + * we wait. + */ + while (!port->ops->tx_empty(port)) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } + set_current_state(TASK_RUNNING); /* might not be needed */ +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + tty_lock(); + __uart_wait_until_sent(port, timeout); + tty_unlock(); +} + +/* + * This is called with the BKL held in + * linux/drivers/char/tty_io.c:do_tty_hangup() + * We're called from the eventd thread, so we can sleep for + * a _short_ time only. + */ +static void uart_hangup(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + unsigned long flags; + + BUG_ON(!tty_locked()); + pr_debug("uart_hangup(%d)\n", state->uart_port->line); + + mutex_lock(&port->mutex); + if (port->flags & ASYNC_NORMAL_ACTIVE) { + uart_flush_buffer(tty); + uart_shutdown(tty, state); + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->delta_msr_wait); + } + mutex_unlock(&port->mutex); +} + +/** + * uart_update_termios - update the terminal hw settings + * @tty: tty associated with UART + * @state: UART to update + * + * Copy across the serial console cflag setting into the termios settings + * for the initial open of the port. This allows continuity between the + * kernel settings, and the settings init adopts when it opens the port + * for the first time. + */ +static void uart_update_termios(struct tty_struct *tty, + struct uart_state *state) +{ + struct uart_port *port = state->uart_port; + + if (uart_console(port) && port->cons->cflag) { + tty->termios->c_cflag = port->cons->cflag; + port->cons->cflag = 0; + } + + /* + * If the device failed to grab its irq resources, + * or some other error occurred, don't try to talk + * to the port hardware. + */ + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + /* + * Make termios settings take effect. + */ + uart_change_speed(tty, state, NULL); + + /* + * And finally enable the RTS and DTR signals. + */ + if (tty->termios->c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } +} + +static int uart_carrier_raised(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + int mctrl; + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} + +static void uart_dtr_rts(struct tty_port *port, int onoff) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + + if (onoff) { + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + + /* + * If this is the first open to succeed, + * adjust things to suit. + */ + if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) + uart_update_termios(port->tty, state); + } + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); +} + +static struct uart_state *uart_get(struct uart_driver *drv, int line) +{ + struct uart_state *state; + struct tty_port *port; + int ret = 0; + + state = drv->state + line; + port = &state->port; + if (mutex_lock_interruptible(&port->mutex)) { + ret = -ERESTARTSYS; + goto err; + } + + port->count++; + if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { + ret = -ENXIO; + goto err_unlock; + } + return state; + + err_unlock: + port->count--; + mutex_unlock(&port->mutex); + err: + return ERR_PTR(ret); +} + +/* + * calls to uart_open are serialised by the BKL in + * fs/char_dev.c:chrdev_open() + * Note that if this fails, then uart_close() _will_ be called. + * + * In time, we want to scrap the "opening nonpresent ports" + * behaviour and implement an alternative way for setserial + * to set base addresses/ports/types. This will allow us to + * get rid of a certain amount of extra tests. + */ +static int uart_open(struct tty_struct *tty, struct file *filp) +{ + struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; + struct uart_state *state; + struct tty_port *port; + int retval, line = tty->index; + + BUG_ON(!tty_locked()); + pr_debug("uart_open(%d) called\n", line); + + /* + * tty->driver->num won't change, so we won't fail here with + * tty->driver_data set to something non-NULL (and therefore + * we won't get caught by uart_close()). + */ + retval = -ENODEV; + if (line >= tty->driver->num) + goto fail; + + /* + * We take the semaphore inside uart_get to guarantee that we won't + * be re-entered while allocating the state structure, or while we + * request any IRQs that the driver may need. This also has the nice + * side-effect that it delays the action of uart_hangup, so we can + * guarantee that state->port.tty will always contain something + * reasonable. + */ + state = uart_get(drv, line); + if (IS_ERR(state)) { + retval = PTR_ERR(state); + goto fail; + } + port = &state->port; + + /* + * Once we set tty->driver_data here, we are guaranteed that + * uart_close() will decrement the driver module use count. + * Any failures from here onwards should not touch the count. + */ + tty->driver_data = state; + state->uart_port->state = state; + tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; + tty->alt_speed = 0; + tty_port_tty_set(port, tty); + + /* + * If the port is in the middle of closing, bail out now. + */ + if (tty_hung_up_p(filp)) { + retval = -EAGAIN; + port->count--; + mutex_unlock(&port->mutex); + goto fail; + } + + /* + * Make sure the device is in D0 state. + */ + if (port->count == 1) + uart_change_pm(state, 0); + + /* + * Start up the serial port. + */ + retval = uart_startup(tty, state, 0); + + /* + * If we succeeded, wait until the port is ready. + */ + mutex_unlock(&port->mutex); + if (retval == 0) + retval = tty_port_block_til_ready(port, tty, filp); + +fail: + return retval; +} + +static const char *uart_type(struct uart_port *port) +{ + const char *str = NULL; + + if (port->ops->type) + str = port->ops->type(port); + + if (!str) + str = "unknown"; + + return str; +} + +#ifdef CONFIG_PROC_FS + +static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) +{ + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + int pm_state; + struct uart_port *uport = state->uart_port; + char stat_buf[32]; + unsigned int status; + int mmio; + + if (!uport) + return; + + mmio = uport->iotype >= UPIO_MEM; + seq_printf(m, "%d: uart:%s %s%08llX irq:%d", + uport->line, uart_type(uport), + mmio ? "mmio:0x" : "port:", + mmio ? (unsigned long long)uport->mapbase + : (unsigned long long)uport->iobase, + uport->irq); + + if (uport->type == PORT_UNKNOWN) { + seq_putc(m, '\n'); + return; + } + + if (capable(CAP_SYS_ADMIN)) { + mutex_lock(&port->mutex); + pm_state = state->pm_state; + if (pm_state) + uart_change_pm(state, 0); + spin_lock_irq(&uport->lock); + status = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (pm_state) + uart_change_pm(state, pm_state); + mutex_unlock(&port->mutex); + + seq_printf(m, " tx:%d rx:%d", + uport->icount.tx, uport->icount.rx); + if (uport->icount.frame) + seq_printf(m, " fe:%d", + uport->icount.frame); + if (uport->icount.parity) + seq_printf(m, " pe:%d", + uport->icount.parity); + if (uport->icount.brk) + seq_printf(m, " brk:%d", + uport->icount.brk); + if (uport->icount.overrun) + seq_printf(m, " oe:%d", + uport->icount.overrun); + +#define INFOBIT(bit, str) \ + if (uport->mctrl & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) +#define STATBIT(bit, str) \ + if (status & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) + + stat_buf[0] = '\0'; + stat_buf[1] = '\0'; + INFOBIT(TIOCM_RTS, "|RTS"); + STATBIT(TIOCM_CTS, "|CTS"); + INFOBIT(TIOCM_DTR, "|DTR"); + STATBIT(TIOCM_DSR, "|DSR"); + STATBIT(TIOCM_CAR, "|CD"); + STATBIT(TIOCM_RNG, "|RI"); + if (stat_buf[0]) + stat_buf[0] = ' '; + + seq_puts(m, stat_buf); + } + seq_putc(m, '\n'); +#undef STATBIT +#undef INFOBIT +} + +static int uart_proc_show(struct seq_file *m, void *v) +{ + struct tty_driver *ttydrv = m->private; + struct uart_driver *drv = ttydrv->driver_state; + int i; + + seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", + "", "", ""); + for (i = 0; i < drv->nr; i++) + uart_line_info(m, drv, i); + return 0; +} + +static int uart_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, uart_proc_show, PDE(inode)->data); +} + +static const struct file_operations uart_proc_fops = { + .owner = THIS_MODULE, + .open = uart_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +/* + * uart_console_write - write a console message to a serial port + * @port: the port to write the message + * @s: array of characters + * @count: number of characters in string to write + * @write: function to write character to port + */ +void uart_console_write(struct uart_port *port, const char *s, + unsigned int count, + void (*putchar)(struct uart_port *, int)) +{ + unsigned int i; + + for (i = 0; i < count; i++, s++) { + if (*s == '\n') + putchar(port, '\r'); + putchar(port, *s); + } +} +EXPORT_SYMBOL_GPL(uart_console_write); + +/* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ +struct uart_port * __init +uart_get_console(struct uart_port *ports, int nr, struct console *co) +{ + int idx = co->index; + + if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && + ports[idx].membase == NULL)) + for (idx = 0; idx < nr; idx++) + if (ports[idx].iobase != 0 || + ports[idx].membase != NULL) + break; + + co->index = idx; + + return ports + idx; +} + +/** + * uart_parse_options - Parse serial port baud/parity/bits/flow contro. + * @options: pointer to option string + * @baud: pointer to an 'int' variable for the baud rate. + * @parity: pointer to an 'int' variable for the parity. + * @bits: pointer to an 'int' variable for the number of data bits. + * @flow: pointer to an 'int' variable for the flow control character. + * + * uart_parse_options decodes a string containing the serial console + * options. The format of the string is , + * eg: 115200n8r + */ +void +uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) +{ + char *s = options; + + *baud = simple_strtoul(s, NULL, 10); + while (*s >= '0' && *s <= '9') + s++; + if (*s) + *parity = *s++; + if (*s) + *bits = *s++ - '0'; + if (*s) + *flow = *s; +} +EXPORT_SYMBOL_GPL(uart_parse_options); + +struct baud_rates { + unsigned int rate; + unsigned int cflag; +}; + +static const struct baud_rates baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 0, B38400 } +}; + +/** + * uart_set_options - setup the serial console parameters + * @port: pointer to the serial ports uart_port structure + * @co: console pointer + * @baud: baud rate + * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) + * @bits: number of data bits + * @flow: flow control character - 'r' (rts) + */ +int +uart_set_options(struct uart_port *port, struct console *co, + int baud, int parity, int bits, int flow) +{ + struct ktermios termios; + static struct ktermios dummy; + int i; + + /* + * Ensure that the serial console lock is initialised + * early. + */ + spin_lock_init(&port->lock); + lockdep_set_class(&port->lock, &port_lock_key); + + memset(&termios, 0, sizeof(struct ktermios)); + + termios.c_cflag = CREAD | HUPCL | CLOCAL; + + /* + * Construct a cflag setting. + */ + for (i = 0; baud_rates[i].rate; i++) + if (baud_rates[i].rate <= baud) + break; + + termios.c_cflag |= baud_rates[i].cflag; + + if (bits == 7) + termios.c_cflag |= CS7; + else + termios.c_cflag |= CS8; + + switch (parity) { + case 'o': case 'O': + termios.c_cflag |= PARODD; + /*fall through*/ + case 'e': case 'E': + termios.c_cflag |= PARENB; + break; + } + + if (flow == 'r') + termios.c_cflag |= CRTSCTS; + + /* + * some uarts on other side don't support no flow control. + * So we set * DTR in host uart to make them happy + */ + port->mctrl |= TIOCM_DTR; + + port->ops->set_termios(port, &termios, &dummy); + /* + * Allow the setting of the UART parameters with a NULL console + * too: + */ + if (co) + co->cflag = termios.c_cflag; + + return 0; +} +EXPORT_SYMBOL_GPL(uart_set_options); +#endif /* CONFIG_SERIAL_CORE_CONSOLE */ + +static void uart_change_pm(struct uart_state *state, int pm_state) +{ + struct uart_port *port = state->uart_port; + + if (state->pm_state != pm_state) { + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; + } +} + +struct uart_match { + struct uart_port *port; + struct uart_driver *driver; +}; + +static int serial_match_port(struct device *dev, void *data) +{ + struct uart_match *match = data; + struct tty_driver *tty_drv = match->driver->tty_driver; + dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + + match->port->line; + + return dev->devt == devt; /* Actually, only one tty per port */ +} + +int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + struct tty_struct *tty; + + mutex_lock(&port->mutex); + + /* Must be inside the mutex lock until we convert to tty_port */ + tty = port->tty; + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (device_may_wakeup(tty_dev)) { + if (!enable_irq_wake(uport->irq)) + uport->irq_wake = 1; + put_device(tty_dev); + mutex_unlock(&port->mutex); + return 0; + } + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; + + if (port->flags & ASYNC_INITIALIZED) { + const struct uart_ops *ops = uport->ops; + int tries; + + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } + + /* + * Wait for the transmitter to empty. + */ + for (tries = 3; !ops->tx_empty(uport) && tries; tries--) + msleep(10); + if (!tries) + printk(KERN_ERR "%s%s%s%d: Unable to drain " + "transmitter\n", + uport->dev ? dev_name(uport->dev) : "", + uport->dev ? ": " : "", + drv->dev_name, + drv->tty_driver->name_base + uport->line); + + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); + } + + /* + * Disable the console device before suspending. + */ + if (console_suspend_enabled && uart_console(uport)) + console_stop(uport->cons); + + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); + + mutex_unlock(&port->mutex); + + return 0; +} + +int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + struct ktermios termios; + + mutex_lock(&port->mutex); + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (!uport->suspended && device_may_wakeup(tty_dev)) { + if (uport->irq_wake) { + disable_irq_wake(uport->irq); + uport->irq_wake = 0; + } + mutex_unlock(&port->mutex); + return 0; + } + uport->suspended = 0; + + /* + * Re-enable the console device after suspending. + */ + if (console_suspend_enabled && uart_console(uport)) { + /* + * First try to use the console cflag setting. + */ + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = uport->cons->cflag; + + /* + * If that's unset, use the tty termios setting. + */ + if (port->tty && port->tty->termios && termios.c_cflag == 0) + termios = *(port->tty->termios); + + uart_change_pm(state, 0); + uport->ops->set_termios(uport, &termios, NULL); + console_start(uport->cons); + } + + if (port->flags & ASYNC_SUSPENDED) { + const struct uart_ops *ops = uport->ops; + int ret; + + uart_change_pm(state, 0); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, 0); + spin_unlock_irq(&uport->lock); + if (console_suspend_enabled || !uart_console(uport)) { + /* Protected by port mutex for now */ + struct tty_struct *tty = port->tty; + ret = ops->startup(uport); + if (ret == 0) { + if (tty) + uart_change_speed(tty, state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(tty, state); + } + } + + clear_bit(ASYNCB_SUSPENDED, &port->flags); + } + + mutex_unlock(&port->mutex); + + return 0; +} + +static inline void +uart_report_port(struct uart_driver *drv, struct uart_port *port) +{ + char address[64]; + + switch (port->iotype) { + case UPIO_PORT: + snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase); + break; + case UPIO_HUB6: + snprintf(address, sizeof(address), + "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); + break; + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_TSI: + case UPIO_DWAPB: + case UPIO_DWAPB32: + snprintf(address, sizeof(address), + "MMIO 0x%llx", (unsigned long long)port->mapbase); + break; + default: + strlcpy(address, "*unknown*", sizeof(address)); + break; + } + + printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", + port->dev ? dev_name(port->dev) : "", + port->dev ? ": " : "", + drv->dev_name, + drv->tty_driver->name_base + port->line, + address, port->irq, uart_type(port)); +} + +static void +uart_configure_port(struct uart_driver *drv, struct uart_state *state, + struct uart_port *port) +{ + unsigned int flags; + + /* + * If there isn't a port here, don't do anything further. + */ + if (!port->iobase && !port->mapbase && !port->membase) + return; + + /* + * Now do the auto configuration stuff. Note that config_port + * is expected to claim the resources and map the port for us. + */ + flags = 0; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + if (port->flags & UPF_BOOT_AUTOCONF) { + if (!(port->flags & UPF_FIXED_TYPE)) { + port->type = PORT_UNKNOWN; + flags |= UART_CONFIG_TYPE; + } + port->ops->config_port(port, flags); + } + + if (port->type != PORT_UNKNOWN) { + unsigned long flags; + + uart_report_port(drv, port); + + /* Power up port for set_mctrl() */ + uart_change_pm(state, 0); + + /* + * Ensure that the modem control lines are de-activated. + * keep the DTR setting that is set in uart_set_options() + * We probably don't need a spinlock around this, but + */ + spin_lock_irqsave(&port->lock, flags); + port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * If this driver supports console, and it hasn't been + * successfully registered yet, try to re-register it. + * It may be that the port was not available. + */ + if (port->cons && !(port->cons->flags & CON_ENABLED)) + register_console(port->cons); + + /* + * Power down all ports by default, except the + * console if we have one. + */ + if (!uart_console(port)) + uart_change_pm(state, 3); + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static int uart_poll_init(struct tty_driver *driver, int line, char *options) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (!state || !state->uart_port) + return -1; + + port = state->uart_port; + if (!(port->ops->poll_get_char && port->ops->poll_put_char)) + return -1; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(port, NULL, baud, parity, bits, flow); + } + + return 0; +} + +static int uart_poll_get_char(struct tty_driver *driver, int line) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->uart_port) + return -1; + + port = state->uart_port; + return port->ops->poll_get_char(port); +} + +static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->uart_port) + return; + + port = state->uart_port; + port->ops->poll_put_char(port, ch); +} +#endif + +static const struct tty_operations uart_ops = { + .open = uart_open, + .close = uart_close, + .write = uart_write, + .put_char = uart_put_char, + .flush_chars = uart_flush_chars, + .write_room = uart_write_room, + .chars_in_buffer= uart_chars_in_buffer, + .flush_buffer = uart_flush_buffer, + .ioctl = uart_ioctl, + .throttle = uart_throttle, + .unthrottle = uart_unthrottle, + .send_xchar = uart_send_xchar, + .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, + .stop = uart_stop, + .start = uart_start, + .hangup = uart_hangup, + .break_ctl = uart_break_ctl, + .wait_until_sent= uart_wait_until_sent, +#ifdef CONFIG_PROC_FS + .proc_fops = &uart_proc_fops, +#endif + .tiocmget = uart_tiocmget, + .tiocmset = uart_tiocmset, + .get_icount = uart_get_icount, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = uart_poll_init, + .poll_get_char = uart_poll_get_char, + .poll_put_char = uart_poll_put_char, +#endif +}; + +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, +}; + +/** + * uart_register_driver - register a driver with the uart core layer + * @drv: low level driver structure + * + * Register a uart driver with the core driver. We in turn register + * with the tty layer, and initialise the core driver per-port state. + * + * We have a proc file in /proc/tty/driver which is named after the + * normal driver. + * + * drv->port should be NULL, and the per-port structures should be + * registered using uart_add_one_port after this call has succeeded. + */ +int uart_register_driver(struct uart_driver *drv) +{ + struct tty_driver *normal; + int i, retval; + + BUG_ON(drv->state); + + /* + * Maybe we should be using a slab cache for this, especially if + * we have a large number of ports to handle. + */ + drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); + if (!drv->state) + goto out; + + normal = alloc_tty_driver(drv->nr); + if (!normal) + goto out_kfree; + + drv->tty_driver = normal; + + normal->owner = drv->owner; + normal->driver_name = drv->driver_name; + normal->name = drv->dev_name; + normal->major = drv->major; + normal->minor_start = drv->minor; + normal->type = TTY_DRIVER_TYPE_SERIAL; + normal->subtype = SERIAL_TYPE_NORMAL; + normal->init_termios = tty_std_termios; + normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; + normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + normal->driver_state = drv; + tty_set_operations(normal, &uart_ops); + + /* + * Initialise the UART state(s). + */ + for (i = 0; i < drv->nr; i++) { + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + + tty_port_init(port); + port->ops = &uart_port_ops; + port->close_delay = 500; /* .5 seconds */ + port->closing_wait = 30000; /* 30 seconds */ + tasklet_init(&state->tlet, uart_tasklet_action, + (unsigned long)state); + } + + retval = tty_register_driver(normal); + if (retval >= 0) + return retval; + + put_tty_driver(normal); +out_kfree: + kfree(drv->state); +out: + return -ENOMEM; +} + +/** + * uart_unregister_driver - remove a driver from the uart core layer + * @drv: low level driver structure + * + * Remove all references to a driver from the core driver. The low + * level driver must have removed all its ports via the + * uart_remove_one_port() if it registered them with uart_add_one_port(). + * (ie, drv->port == NULL) + */ +void uart_unregister_driver(struct uart_driver *drv) +{ + struct tty_driver *p = drv->tty_driver; + tty_unregister_driver(p); + put_tty_driver(p); + kfree(drv->state); + drv->tty_driver = NULL; +} + +struct tty_driver *uart_console_device(struct console *co, int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +/** + * uart_add_one_port - attach a driver-defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure to use for this port. + * + * This allows the driver to register its own uart_port structure + * with the core driver. The main purpose is to allow the low + * level uart drivers to expand uart_port, rather than having yet + * more levels of structures. + */ +int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state; + struct tty_port *port; + int ret = 0; + struct device *tty_dev; + + BUG_ON(in_interrupt()); + + if (uport->line >= drv->nr) + return -EINVAL; + + state = drv->state + uport->line; + port = &state->port; + + mutex_lock(&port_mutex); + mutex_lock(&port->mutex); + if (state->uart_port) { + ret = -EINVAL; + goto out; + } + + state->uart_port = uport; + state->pm_state = -1; + + uport->cons = drv->cons; + uport->state = state; + + /* + * If this port is a console, then the spinlock is already + * initialised. + */ + if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) { + spin_lock_init(&uport->lock); + lockdep_set_class(&uport->lock, &port_lock_key); + } + + uart_configure_port(drv, state, uport); + + /* + * Register the port whether it's detected or not. This allows + * setserial to be used to alter this ports parameters. + */ + tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); + if (likely(!IS_ERR(tty_dev))) { + device_init_wakeup(tty_dev, 1); + device_set_wakeup_enable(tty_dev, 0); + } else + printk(KERN_ERR "Cannot register tty device on line %d\n", + uport->line); + + /* + * Ensure UPF_DEAD is not set. + */ + uport->flags &= ~UPF_DEAD; + + out: + mutex_unlock(&port->mutex); + mutex_unlock(&port_mutex); + + return ret; +} + +/** + * uart_remove_one_port - detach a driver defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure for this port + * + * This unhooks (and hangs up) the specified port structure from the + * core driver. No further calls will be made to the low-level code + * for this port. + */ +int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + + BUG_ON(in_interrupt()); + + if (state->uart_port != uport) + printk(KERN_ALERT "Removing wrong port: %p != %p\n", + state->uart_port, uport); + + mutex_lock(&port_mutex); + + /* + * Mark the port "dead" - this prevents any opens from + * succeeding while we shut down the port. + */ + mutex_lock(&port->mutex); + uport->flags |= UPF_DEAD; + mutex_unlock(&port->mutex); + + /* + * Remove the devices from the tty layer + */ + tty_unregister_device(drv->tty_driver, uport->line); + + if (port->tty) + tty_vhangup(port->tty); + + /* + * Free the port IO and memory resources, if any. + */ + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + /* + * Indicate that there isn't a port here anymore. + */ + uport->type = PORT_UNKNOWN; + + /* + * Kill the tasklet, and free resources. + */ + tasklet_kill(&state->tlet); + + state->uart_port = NULL; + mutex_unlock(&port_mutex); + + return 0; +} + +/* + * Are the two ports equivalent? + */ +int uart_match_port(struct uart_port *port1, struct uart_port *port2) +{ + if (port1->iotype != port2->iotype) + return 0; + + switch (port1->iotype) { + case UPIO_PORT: + return (port1->iobase == port2->iobase); + case UPIO_HUB6: + return (port1->iobase == port2->iobase) && + (port1->hub6 == port2->hub6); + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_TSI: + case UPIO_DWAPB: + case UPIO_DWAPB32: + return (port1->mapbase == port2->mapbase); + } + return 0; +} +EXPORT_SYMBOL(uart_match_port); + +EXPORT_SYMBOL(uart_write_wakeup); +EXPORT_SYMBOL(uart_register_driver); +EXPORT_SYMBOL(uart_unregister_driver); +EXPORT_SYMBOL(uart_suspend_port); +EXPORT_SYMBOL(uart_resume_port); +EXPORT_SYMBOL(uart_add_one_port); +EXPORT_SYMBOL(uart_remove_one_port); + +MODULE_DESCRIPTION("Serial driver core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c new file mode 100644 index 0000000..93760b2 --- /dev/null +++ b/drivers/tty/serial/serial_cs.c @@ -0,0 +1,869 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) +{ + port->uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device * link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + return serial_config(link); +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, + unsigned int iobase, int irq) +{ + struct uart_port port; + int line; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; + port.irq = irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &handle->dev; + if (buggy_uart) + port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &port); + + line = serial8250_register_port(&port); + if (line < 0) { + printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " + "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i = -ENODEV, try; + + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; + + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return -1; + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -1; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + link->config_flags |= CONF_AUTO_SET_IO; + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, "no usable port range " + "found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + int err; + + if (link->config_index == 1 || + link->config_index == 3) { + err = setup_serial(link, info, base2, + link->irq); + base2 = link->resource[0]->start; + } else { + err = setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device * link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) + pcmcia_loop_config(link, serial_check_for_multi, info); + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; + +static int __init init_serial_cs(void) +{ + return pcmcia_register_driver(&serial_cs_driver); +} + +static void __exit exit_serial_cs(void) +{ + pcmcia_unregister_driver(&serial_cs_driver); +} + +module_init(init_serial_cs); +module_exit(exit_serial_cs); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c new file mode 100644 index 0000000..b196202 --- /dev/null +++ b/drivers/tty/serial/serial_ks8695.c @@ -0,0 +1,705 @@ +/* + * drivers/serial/serial_ks8695.c + * + * Driver for KS8695 serial ports + * + * Based on drivers/serial/serial_amba.c, by Kam Lee. + * + * Copyright 2002-2005 Micrel Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + +#define SERIAL_KS8695_MAJOR 204 +#define SERIAL_KS8695_MINOR 16 +#define SERIAL_KS8695_DEVNAME "ttyAM" + +#define SERIAL_KS8695_NR 1 + +/* + * Access macros for the KS8695 UART + */ +#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF) +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH) +#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC) +#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC) +#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS) +#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS) +#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC) +#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC) +#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC) +#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC) +#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD) +#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD) + +#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST) + +#define UART_DUMMY_LSR_RX 0x100 +#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4) + +static inline int tx_enabled(struct uart_port *port) +{ + return port->unused[0] & 1; +} + +static inline int rx_enabled(struct uart_port *port) +{ + return port->unused[0] & 2; +} + +static inline int ms_enabled(struct uart_port *port) +{ + return port->unused[0] & 4; +} + +static inline void ms_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 4; + else + port->unused[0] &= ~4; +} + +static inline void rx_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 2; + else + port->unused[0] &= ~2; +} + +static inline void tx_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 1; + else + port->unused[0] &= ~1; +} + + +#ifdef SUPPORT_SYSRQ +static struct console ks8695_console; +#endif + +static void ks8695uart_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + /* use disable_irq_nosync() and not disable_irq() to avoid self + * imposed deadlock by not waiting for irq handler to end, + * since this ks8695uart_stop_tx() is called from interrupt context. + */ + disable_irq_nosync(KS8695_IRQ_UART_TX); + tx_enable(port, 0); + } +} + +static void ks8695uart_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(KS8695_IRQ_UART_TX); + tx_enable(port, 1); + } +} + +static void ks8695uart_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + disable_irq(KS8695_IRQ_UART_RX); + rx_enable(port, 0); + } +} + +static void ks8695uart_enable_ms(struct uart_port *port) +{ + if (!ms_enabled(port)) { + enable_irq(KS8695_IRQ_UART_MODEM_STATUS); + ms_enable(port,1); + } +} + +static void ks8695uart_disable_ms(struct uart_port *port) +{ + if (ms_enabled(port)) { + disable_irq(KS8695_IRQ_UART_MODEM_STATUS); + ms_enable(port,0); + } +} + +static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, lsr, flg, max_count = 256; + + status = UART_GET_LSR(port); /* clears pending LSR interrupts */ + while ((status & URLS_URDR) && max_count--) { + ch = UART_GET_CHAR(port); + flg = TTY_NORMAL; + + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX; + if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) { + if (lsr & URLS_URBI) { + lsr &= ~(URLS_URFE | URLS_URPE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + if (lsr & URLS_URPE) + port->icount.parity++; + if (lsr & URLS_URFE) + port->icount.frame++; + if (lsr & URLS_URROE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + + if (lsr & URLS_URBI) + flg = TTY_BREAK; + else if (lsr & URLS_URPE) + flg = TTY_PARITY; + else if (lsr & URLS_URFE) + flg = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, URLS_URROE, ch, flg); + +ignore_char: + status = UART_GET_LSR(port); + } + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + + +static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + unsigned int count; + + if (port->x_char) { + KS8695_CLR_TX_INT(); + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + + if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { + ks8695uart_stop_tx(port); + return IRQ_HANDLED; + } + + count = 16; /* fifo size */ + while (!uart_circ_empty(xmit) && (count-- > 0)) { + KS8695_CLR_TX_INT(); + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + ks8695uart_stop_tx(port); + + return IRQ_HANDLED; +} + +static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + /* + * clear modem interrupt by reading MSR + */ + status = UART_GET_MSR(port); + + if (status & URMS_URDDCD) + uart_handle_dcd_change(port, status & URMS_URDDCD); + + if (status & URMS_URDDST) + port->icount.dsr++; + + if (status & URMS_URDCTS) + uart_handle_cts_change(port, status & URMS_URDCTS); + + if (status & URMS_URTERI) + port->icount.rng++; + + wake_up_interruptible(&port->state->port.delta_msr_wait); + + return IRQ_HANDLED; +} + +static unsigned int ks8695uart_tx_empty(struct uart_port *port) +{ + return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0; +} + +static unsigned int ks8695uart_get_mctrl(struct uart_port *port) +{ + unsigned int result = 0; + unsigned int status; + + status = UART_GET_MSR(port); + if (status & URMS_URDCD) + result |= TIOCM_CAR; + if (status & URMS_URDSR) + result |= TIOCM_DSR; + if (status & URMS_URCTS) + result |= TIOCM_CTS; + if (status & URMS_URRI) + result |= TIOCM_RI; + + return result; +} + +static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int mcr; + + mcr = UART_GET_MCR(port); + if (mctrl & TIOCM_RTS) + mcr |= URMC_URRTS; + else + mcr &= ~URMC_URRTS; + + if (mctrl & TIOCM_DTR) + mcr |= URMC_URDTR; + else + mcr &= ~URMC_URDTR; + + UART_PUT_MCR(port, mcr); +} + +static void ks8695uart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int lcr; + + lcr = UART_GET_LCR(port); + + if (break_state == -1) + lcr |= URLC_URSBC; + else + lcr &= ~URLC_URSBC; + + UART_PUT_LCR(port, lcr); +} + +static int ks8695uart_startup(struct uart_port *port) +{ + int retval; + + set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN); + tx_enable(port, 0); + rx_enable(port, 1); + ms_enable(port, 1); + + /* + * Allocate the IRQ + */ + retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port); + if (retval) + goto err_tx; + + retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port); + if (retval) + goto err_rx; + + retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port); + if (retval) + goto err_ls; + + retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port); + if (retval) + goto err_ms; + + return 0; + +err_ms: + free_irq(KS8695_IRQ_UART_LINE_STATUS, port); +err_ls: + free_irq(KS8695_IRQ_UART_RX, port); +err_rx: + free_irq(KS8695_IRQ_UART_TX, port); +err_tx: + return retval; +} + +static void ks8695uart_shutdown(struct uart_port *port) +{ + /* + * Free the interrupt + */ + free_irq(KS8695_IRQ_UART_RX, port); + free_irq(KS8695_IRQ_UART_TX, port); + free_irq(KS8695_IRQ_UART_MODEM_STATUS, port); + free_irq(KS8695_IRQ_UART_LINE_STATUS, port); + + /* disable break condition and fifos */ + UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC); + UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE); +} + +static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) +{ + unsigned int lcr, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = URCL_5; + break; + case CS6: + lcr = URCL_6; + break; + case CS7: + lcr = URCL_7; + break; + default: + lcr = URCL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= URLC_URSB; + + /* parity */ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ + if (termios->c_cflag & PARODD) + lcr |= URPE_MARK; + else + lcr |= URPE_SPACE; + } + else if (termios->c_cflag & PARODD) + lcr |= URPE_ODD; + else + lcr |= URPE_EVEN; + } + + if (port->fifosize > 1) + fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = URLS_URROE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (URLS_URFE | URLS_URPE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= URLS_URBI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (URLS_URFE | URLS_URPE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= URLS_URBI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= URLS_URROE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_LSR_RX; + + /* first, disable everything */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + ks8695uart_enable_ms(port); + else + ks8695uart_disable_ms(port); + + /* Set baud rate */ + UART_PUT_BRDR(port, quot); + + UART_PUT_LCR(port, lcr); + UART_PUT_FCR(port, fcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *ks8695uart_type(struct uart_port *port) +{ + return port->type == PORT_KS8695 ? "KS8695" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void ks8695uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int ks8695uart_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, + "serial_ks8695") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void ks8695uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_KS8695; + ks8695uart_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695) + ret = -EINVAL; + if (ser->irq != port->irq) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops ks8695uart_pops = { + .tx_empty = ks8695uart_tx_empty, + .set_mctrl = ks8695uart_set_mctrl, + .get_mctrl = ks8695uart_get_mctrl, + .stop_tx = ks8695uart_stop_tx, + .start_tx = ks8695uart_start_tx, + .stop_rx = ks8695uart_stop_rx, + .enable_ms = ks8695uart_enable_ms, + .break_ctl = ks8695uart_break_ctl, + .startup = ks8695uart_startup, + .shutdown = ks8695uart_shutdown, + .set_termios = ks8695uart_set_termios, + .type = ks8695uart_type, + .release_port = ks8695uart_release_port, + .request_port = ks8695uart_request_port, + .config_port = ks8695uart_config_port, + .verify_port = ks8695uart_verify_port, +}; + +static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { + { + .membase = (void *) KS8695_UART_VA, + .mapbase = KS8695_UART_VA, + .iotype = SERIAL_IO_MEM, + .irq = KS8695_IRQ_UART_TX, + .uartclk = KS8695_CLOCK_RATE * 16, + .fifosize = 16, + .ops = &ks8695uart_pops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + } +}; + +#ifdef CONFIG_SERIAL_KS8695_CONSOLE +static void ks8695_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_LSR(port) & URLS_URTHRE)) + barrier(); + + UART_PUT_CHAR(port, ch); +} + +static void ks8695_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = ks8695uart_ports + co->index; + + uart_console_write(port, s, count, ks8695_console_putchar); +} + +static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) +{ + unsigned int lcr; + + lcr = UART_GET_LCR(port); + + switch (lcr & URLC_PARITY) { + case URPE_ODD: + *parity = 'o'; + break; + case URPE_EVEN: + *parity = 'e'; + break; + default: + *parity = 'n'; + } + + switch (lcr & URLC_URCL) { + case URCL_5: + *bits = 5; + break; + case URCL_6: + *bits = 6; + break; + case URCL_7: + *bits = 7; + break; + default: + *bits = 8; + } + + *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF); + *baud /= 16; + *baud &= 0xFFFFFFF0; +} + +static int __init ks8695_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + ks8695_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver ks8695_reg; + +static struct console ks8695_console = { + .name = SERIAL_KS8695_DEVNAME, + .write = ks8695_console_write, + .device = uart_console_device, + .setup = ks8695_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ks8695_reg, +}; + +static int __init ks8695_console_init(void) +{ + add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); + register_console(&ks8695_console); + return 0; +} + +console_initcall(ks8695_console_init); + +#define KS8695_CONSOLE &ks8695_console +#else +#define KS8695_CONSOLE NULL +#endif + +static struct uart_driver ks8695_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_ks8695", + .dev_name = SERIAL_KS8695_DEVNAME, + .major = SERIAL_KS8695_MAJOR, + .minor = SERIAL_KS8695_MINOR, + .nr = SERIAL_KS8695_NR, + .cons = KS8695_CONSOLE, +}; + +static int __init ks8695uart_init(void) +{ + int i, ret; + + printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n"); + + ret = uart_register_driver(&ks8695_reg); + if (ret) + return ret; + + for (i = 0; i < SERIAL_KS8695_NR; i++) + uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]); + + return 0; +} + +static void __exit ks8695uart_exit(void) +{ + int i; + + for (i = 0; i < SERIAL_KS8695_NR; i++) + uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]); + uart_unregister_driver(&ks8695_reg); +} + +module_init(ks8695uart_init); +module_exit(ks8695uart_exit); + +MODULE_DESCRIPTION("KS8695 serial port driver"); +MODULE_AUTHOR("Micrel Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c new file mode 100644 index 0000000..ea74470 --- /dev/null +++ b/drivers/tty/serial/serial_lh7a40x.c @@ -0,0 +1,682 @@ +/* drivers/serial/serial_lh7a40x.c + * + * Copyright (C) 2004 Coastal Environmental Systems + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +/* Driver for Sharp LH7A40X embedded serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. + * + * --- + * + * This driver supports the embedded UARTs of the Sharp LH7A40X series + * CPUs. While similar to the 16550 and other UART chips, there is + * nothing close to register compatibility. Moreover, some of the + * modem control lines are not available, either in the chip or they + * are lacking in the board-level implementation. + * + * - Use of SIRDIS + * For simplicity, we disable the IR functions of any UART whenever + * we enable it. + * + */ + + +#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEV_MAJOR 204 +#define DEV_MINOR 16 +#define DEV_NR 3 + +#define ISR_LOOP_LIMIT 256 + +#define UR(p,o) _UR ((p)->membase, o) +#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) +#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) +#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) + +#define UART_REG_SIZE 32 + +#define UART_R_DATA (0x00) +#define UART_R_FCON (0x04) +#define UART_R_BRCON (0x08) +#define UART_R_CON (0x0c) +#define UART_R_STATUS (0x10) +#define UART_R_RAWISR (0x14) +#define UART_R_INTEN (0x18) +#define UART_R_ISR (0x1c) + +#define UARTEN (0x01) /* UART enable */ +#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ + +#define RxEmpty (0x10) +#define TxEmpty (0x80) +#define TxFull (0x20) +#define nRxRdy RxEmpty +#define nTxRdy TxFull +#define TxBusy (0x08) + +#define RxBreak (0x0800) +#define RxOverrunError (0x0400) +#define RxParityError (0x0200) +#define RxFramingError (0x0100) +#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) + +#define DCD (0x04) +#define DSR (0x02) +#define CTS (0x01) + +#define RxInt (0x01) +#define TxInt (0x02) +#define ModemInt (0x04) +#define RxTimeoutInt (0x08) + +#define MSEOI (0x10) + +#define WLEN_8 (0x60) +#define WLEN_7 (0x40) +#define WLEN_6 (0x20) +#define WLEN_5 (0x00) +#define WLEN (0x60) /* Mask for all word-length bits */ +#define STP2 (0x08) +#define PEN (0x02) /* Parity Enable */ +#define EPS (0x04) /* Even Parity Set */ +#define FEN (0x10) /* FIFO Enable */ +#define BRK (0x01) /* Send Break */ + + +struct uart_port_lh7a40x { + struct uart_port port; + unsigned int statusPrev; /* Most recently read modem status */ +}; + +static void lh7a40xuart_stop_tx (struct uart_port* port) +{ + BIT_CLR (port, UART_R_INTEN, TxInt); +} + +static void lh7a40xuart_start_tx (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, TxInt); + + /* *** FIXME: do I need to check for startup of the + transmitter? The old driver did, but AMBA + doesn't . */ +} + +static void lh7a40xuart_stop_rx (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); +} + +static void lh7a40xuart_enable_ms (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, ModemInt); +} + +static void lh7a40xuart_rx_chars (struct uart_port* port) +{ + struct tty_struct* tty = port->state->port.tty; + int cbRxMax = 256; /* (Gross) limit on receive */ + unsigned int data; /* Received data and status */ + unsigned int flag; + + while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { + data = UR (port, UART_R_DATA); + flag = TTY_NORMAL; + ++port->icount.rx; + + if (unlikely(data & RxError)) { + if (data & RxBreak) { + data &= ~(RxFramingError | RxParityError); + ++port->icount.brk; + if (uart_handle_break (port)) + continue; + } + else if (data & RxParityError) + ++port->icount.parity; + else if (data & RxFramingError) + ++port->icount.frame; + if (data & RxOverrunError) + ++port->icount.overrun; + + /* Mask by termios, leave Rx'd byte */ + data &= port->read_status_mask | 0xff; + + if (data & RxBreak) + flag = TTY_BREAK; + else if (data & RxParityError) + flag = TTY_PARITY; + else if (data & RxFramingError) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char (port, (unsigned char) data)) + continue; + + uart_insert_char(port, data, RxOverrunError, data, flag); + } + tty_flip_buffer_push (tty); + return; +} + +static void lh7a40xuart_tx_chars (struct uart_port* port) +{ + struct circ_buf* xmit = &port->state->xmit; + int cbTxMax = port->fifosize; + + if (port->x_char) { + UR (port, UART_R_DATA) = port->x_char; + ++port->icount.tx; + port->x_char = 0; + return; + } + if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { + lh7a40xuart_stop_tx (port); + return; + } + + /* Unlike the AMBA UART, the lh7a40x UART does not guarantee + that at least half of the FIFO is empty. Instead, we check + status for every character. Using the AMBA method causes + the transmitter to drop characters. */ + + do { + UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + ++port->icount.tx; + if (uart_circ_empty(xmit)) + break; + } while (!(UR (port, UART_R_STATUS) & nTxRdy) + && cbTxMax--); + + if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) + uart_write_wakeup (port); + + if (uart_circ_empty (xmit)) + lh7a40xuart_stop_tx (port); +} + +static void lh7a40xuart_modem_status (struct uart_port* port) +{ + unsigned int status = UR (port, UART_R_STATUS); + unsigned int delta + = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; + + BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ + + if (!delta) /* Only happens if we missed 2 transitions */ + return; + + ((struct uart_port_lh7a40x*) port)->statusPrev = status; + + if (delta & DCD) + uart_handle_dcd_change (port, status & DCD); + + if (delta & DSR) + ++port->icount.dsr; + + if (delta & CTS) + uart_handle_cts_change (port, status & CTS); + + wake_up_interruptible (&port->state->port.delta_msr_wait); +} + +static irqreturn_t lh7a40xuart_int (int irq, void* dev_id) +{ + struct uart_port* port = dev_id; + unsigned int cLoopLimit = ISR_LOOP_LIMIT; + unsigned int isr = UR (port, UART_R_ISR); + + + do { + if (isr & (RxInt | RxTimeoutInt)) + lh7a40xuart_rx_chars(port); + if (isr & ModemInt) + lh7a40xuart_modem_status (port); + if (isr & TxInt) + lh7a40xuart_tx_chars (port); + + if (--cLoopLimit == 0) + break; + + isr = UR (port, UART_R_ISR); + } while (isr & (RxInt | TxInt | RxTimeoutInt)); + + return IRQ_HANDLED; +} + +static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) +{ + return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; +} + +static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) +{ + unsigned int result = 0; + unsigned int status = UR (port, UART_R_STATUS); + + if (status & DCD) + result |= TIOCM_CAR; + if (status & DSR) + result |= TIOCM_DSR; + if (status & CTS) + result |= TIOCM_CTS; + + return result; +} + +static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) +{ + /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ + /* Note, kernel appears to be setting DTR and RTS on console. */ + + /* *** FIXME: this deserves more work. There's some work in + tracing all of the IO pins. */ +#if 0 + if( port->mapbase == UART1_PHYS) { + gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); + + if (mctrl & TIOCM_RTS) + gpio->pbdr &= ~GPIOB_UART1_RTS; + else + gpio->pbdr |= GPIOB_UART1_RTS; + } +#endif +} + +static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ + else + BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static int lh7a40xuart_startup (struct uart_port* port) +{ + int retval; + + retval = request_irq (port->irq, lh7a40xuart_int, 0, + "serial_lh7a40x", port); + if (retval) + return retval; + + /* Initial modem control-line settings */ + ((struct uart_port_lh7a40x*) port)->statusPrev + = UR (port, UART_R_STATUS); + + /* There is presently no configuration option to enable IR. + Thus, we always disable it. */ + + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); + + return 0; +} + +static void lh7a40xuart_shutdown (struct uart_port* port) +{ + free_irq (port->irq, port); + BIT_CLR (port, UART_R_FCON, BRK | FEN); + BIT_CLR (port, UART_R_CON, UARTEN); +} + +static void lh7a40xuart_set_termios (struct uart_port* port, + struct ktermios* termios, + struct ktermios* old) +{ + unsigned int con; + unsigned int inten; + unsigned int fcon; + unsigned long flags; + unsigned int baud; + unsigned int quot; + + baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); + quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ + + switch (termios->c_cflag & CSIZE) { + case CS5: + fcon = WLEN_5; + break; + case CS6: + fcon = WLEN_6; + break; + case CS7: + fcon = WLEN_7; + break; + case CS8: + default: + fcon = WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + fcon |= STP2; + if (termios->c_cflag & PARENB) { + fcon |= PEN; + if (!(termios->c_cflag & PARODD)) + fcon |= EPS; + } + if (port->fifosize > 1) + fcon |= FEN; + + spin_lock_irqsave (&port->lock, flags); + + uart_update_timeout (port, termios->c_cflag, baud); + + port->read_status_mask = RxOverrunError; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= RxBreak; + + /* Figure mask for status we ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= RxBreak; + /* Ignore overrun when ignorning parity */ + /* *** FIXME: is this in the right place? */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxOverrunError; + } + + /* Ignore all receive errors when receive disabled */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RxError; + + con = UR (port, UART_R_CON); + inten = (UR (port, UART_R_INTEN) & ~ModemInt); + + if (UART_ENABLE_MS (port, termios->c_cflag)) + inten |= ModemInt; + + BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ + UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ + UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ + UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ + UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ + UR (port, UART_R_CON) = con; /* Restore UART mode */ + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char* lh7a40xuart_type (struct uart_port* port) +{ + return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; +} + +static void lh7a40xuart_release_port (struct uart_port* port) +{ + release_mem_region (port->mapbase, UART_REG_SIZE); +} + +static int lh7a40xuart_request_port (struct uart_port* port) +{ + return request_mem_region (port->mapbase, UART_REG_SIZE, + "serial_lh7a40x") != NULL + ? 0 : -EBUSY; +} + +static void lh7a40xuart_config_port (struct uart_port* port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_LH7A40X; + lh7a40xuart_request_port (port); + } +} + +static int lh7a40xuart_verify_port (struct uart_port* port, + struct serial_struct* ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) /* *** FIXME: is this true? */ + ret = -EINVAL; + return ret; +} + +static struct uart_ops lh7a40x_uart_ops = { + .tx_empty = lh7a40xuart_tx_empty, + .set_mctrl = lh7a40xuart_set_mctrl, + .get_mctrl = lh7a40xuart_get_mctrl, + .stop_tx = lh7a40xuart_stop_tx, + .start_tx = lh7a40xuart_start_tx, + .stop_rx = lh7a40xuart_stop_rx, + .enable_ms = lh7a40xuart_enable_ms, + .break_ctl = lh7a40xuart_break_ctl, + .startup = lh7a40xuart_startup, + .shutdown = lh7a40xuart_shutdown, + .set_termios = lh7a40xuart_set_termios, + .type = lh7a40xuart_type, + .release_port = lh7a40xuart_release_port, + .request_port = lh7a40xuart_request_port, + .config_port = lh7a40xuart_config_port, + .verify_port = lh7a40xuart_verify_port, +}; + +static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { + { + .port = { + .membase = (void*) io_p2v (UART1_PHYS), + .mapbase = UART1_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART1INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART2_PHYS), + .mapbase = UART2_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART2INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART3_PHYS), + .mapbase = UART3_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART3INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE +# define LH7A40X_CONSOLE NULL +#else +# define LH7A40X_CONSOLE &lh7a40x_console + +static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) +{ + while (UR(port, UART_R_STATUS) & nTxRdy) + ; + UR(port, UART_R_DATA) = ch; +} + +static void lh7a40xuart_console_write (struct console* co, + const char* s, + unsigned int count) +{ + struct uart_port* port = &lh7a40x_ports[co->index].port; + unsigned int con = UR (port, UART_R_CON); + unsigned int inten = UR (port, UART_R_INTEN); + + + UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ + + uart_console_write(port, s, count, lh7a40xuart_console_putchar); + + /* Wait until all characters are sent */ + while (UR (port, UART_R_STATUS) & TxBusy) + ; + + /* Restore control and interrupt mask */ + UR (port, UART_R_CON) = con; + UR (port, UART_R_INTEN) = inten; +} + +static void __init lh7a40xuart_console_get_options (struct uart_port* port, + int* baud, + int* parity, + int* bits) +{ + if (UR (port, UART_R_CON) & UARTEN) { + unsigned int fcon = UR (port, UART_R_FCON); + unsigned int quot = UR (port, UART_R_BRCON) + 1; + + switch (fcon & (PEN | EPS)) { + default: *parity = 'n'; break; + case PEN: *parity = 'o'; break; + case PEN | EPS: *parity = 'e'; break; + } + + switch (fcon & WLEN) { + default: + case WLEN_8: *bits = 8; break; + case WLEN_7: *bits = 7; break; + case WLEN_6: *bits = 6; break; + case WLEN_5: *bits = 5; break; + } + + *baud = port->uartclk/(16*quot); + } +} + +static int __init lh7a40xuart_console_setup (struct console* co, char* options) +{ + struct uart_port* port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= DEV_NR) /* Bounds check on device number */ + co->index = 0; + port = &lh7a40x_ports[co->index].port; + + if (options) + uart_parse_options (options, &baud, &parity, &bits, &flow); + else + lh7a40xuart_console_get_options (port, &baud, &parity, &bits); + + return uart_set_options (port, co, baud, parity, bits, flow); +} + +static struct uart_driver lh7a40x_reg; +static struct console lh7a40x_console = { + .name = "ttyAM", + .write = lh7a40xuart_console_write, + .device = uart_console_device, + .setup = lh7a40xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lh7a40x_reg, +}; + +static int __init lh7a40xuart_console_init(void) +{ + register_console (&lh7a40x_console); + return 0; +} + +console_initcall (lh7a40xuart_console_init); + +#endif + +static struct uart_driver lh7a40x_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = DEV_MAJOR, + .minor = DEV_MINOR, + .nr = DEV_NR, + .cons = LH7A40X_CONSOLE, +}; + +static int __init lh7a40xuart_init(void) +{ + int ret; + + printk (KERN_INFO "serial: LH7A40X serial driver\n"); + + ret = uart_register_driver (&lh7a40x_reg); + + if (ret == 0) { + int i; + + for (i = 0; i < DEV_NR; i++) { + /* UART3, when used, requires GPIO pin reallocation */ + if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) + GPIO_PINMUX |= 1<<3; + uart_add_one_port (&lh7a40x_reg, + &lh7a40x_ports[i].port); + } + } + return ret; +} + +static void __exit lh7a40xuart_exit(void) +{ + int i; + + for (i = 0; i < DEV_NR; i++) + uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); + + uart_unregister_driver (&lh7a40x_reg); +} + +module_init (lh7a40xuart_init); +module_exit (lh7a40xuart_exit); + +MODULE_AUTHOR ("Marc Singer"); +MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); +MODULE_LICENSE ("GPL"); diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c new file mode 100644 index 0000000..c50e9fb --- /dev/null +++ b/drivers/tty/serial/serial_txx9.c @@ -0,0 +1,1344 @@ +/* + * drivers/serial/serial_txx9.c + * + * Derived from many drivers using generic_serial interface, + * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c + * (was in Linux/VR tree) by Jim Pick. + * + * Copyright (C) 1999 Harald Koerfgen + * Copyright (C) 2000 Jim Pick + * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000-2002 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller + */ + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static char *serial_version = "1.11"; +static char *serial_name = "TX39/49 Serial driver"; + +#define PASS_LIMIT 256 + +#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) +/* "ttyS" is used for standard serial driver */ +#define TXX9_TTY_NAME "ttyTX" +#define TXX9_TTY_MINOR_START 196 +#define TXX9_TTY_MAJOR 204 +#else +/* acts like standard serial driver */ +#define TXX9_TTY_NAME "ttyS" +#define TXX9_TTY_MINOR_START 64 +#define TXX9_TTY_MAJOR TTY_MAJOR +#endif + +/* flag aliases */ +#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART +#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER + +#ifdef CONFIG_PCI +/* support for Toshiba TC86C001 SIO */ +#define ENABLE_SERIAL_TXX9_PCI +#endif + +/* + * Number of serial ports + */ +#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS + +struct uart_txx9_port { + struct uart_port port; + /* No additional info for now */ +}; + +#define TXX9_REGION_SIZE 0x24 + +/* TXX9 Serial Registers */ +#define TXX9_SILCR 0x00 +#define TXX9_SIDICR 0x04 +#define TXX9_SIDISR 0x08 +#define TXX9_SICISR 0x0c +#define TXX9_SIFCR 0x10 +#define TXX9_SIFLCR 0x14 +#define TXX9_SIBGR 0x18 +#define TXX9_SITFIFO 0x1c +#define TXX9_SIRFIFO 0x20 + +/* SILCR : Line Control */ +#define TXX9_SILCR_SCS_MASK 0x00000060 +#define TXX9_SILCR_SCS_IMCLK 0x00000000 +#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXX9_SILCR_SCS_SCLK 0x00000040 +#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 +#define TXX9_SILCR_UEPS 0x00000010 +#define TXX9_SILCR_UPEN 0x00000008 +#define TXX9_SILCR_USBL_MASK 0x00000004 +#define TXX9_SILCR_USBL_1BIT 0x00000000 +#define TXX9_SILCR_USBL_2BIT 0x00000004 +#define TXX9_SILCR_UMODE_MASK 0x00000003 +#define TXX9_SILCR_UMODE_8BIT 0x00000000 +#define TXX9_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXX9_SIDICR_TDE 0x00008000 +#define TXX9_SIDICR_RDE 0x00004000 +#define TXX9_SIDICR_TIE 0x00002000 +#define TXX9_SIDICR_RIE 0x00001000 +#define TXX9_SIDICR_SPIE 0x00000800 +#define TXX9_SIDICR_CTSAC 0x00000600 +#define TXX9_SIDICR_STIE_MASK 0x0000003f +#define TXX9_SIDICR_STIE_OERS 0x00000020 +#define TXX9_SIDICR_STIE_CTSS 0x00000010 +#define TXX9_SIDICR_STIE_RBRKD 0x00000008 +#define TXX9_SIDICR_STIE_TRDY 0x00000004 +#define TXX9_SIDICR_STIE_TXALS 0x00000002 +#define TXX9_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXX9_SIDISR_UBRK 0x00008000 +#define TXX9_SIDISR_UVALID 0x00004000 +#define TXX9_SIDISR_UFER 0x00002000 +#define TXX9_SIDISR_UPER 0x00001000 +#define TXX9_SIDISR_UOER 0x00000800 +#define TXX9_SIDISR_ERI 0x00000400 +#define TXX9_SIDISR_TOUT 0x00000200 +#define TXX9_SIDISR_TDIS 0x00000100 +#define TXX9_SIDISR_RDIS 0x00000080 +#define TXX9_SIDISR_STIS 0x00000040 +#define TXX9_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXX9_SICISR_OERS 0x00000020 +#define TXX9_SICISR_CTSS 0x00000010 +#define TXX9_SICISR_RBRKD 0x00000008 +#define TXX9_SICISR_TRDY 0x00000004 +#define TXX9_SICISR_TXALS 0x00000002 +#define TXX9_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXX9_SIFCR_SWRST 0x00008000 +#define TXX9_SIFCR_RDIL_MASK 0x00000180 +#define TXX9_SIFCR_RDIL_1 0x00000000 +#define TXX9_SIFCR_RDIL_4 0x00000080 +#define TXX9_SIFCR_RDIL_8 0x00000100 +#define TXX9_SIFCR_RDIL_12 0x00000180 +#define TXX9_SIFCR_RDIL_MAX 0x00000180 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_1 0x00000000 +#define TXX9_SIFCR_TDIL_4 0x00000001 +#define TXX9_SIFCR_TDIL_8 0x00000010 +#define TXX9_SIFCR_TDIL_MAX 0x00000010 +#define TXX9_SIFCR_TFRST 0x00000004 +#define TXX9_SIFCR_RFRST 0x00000002 +#define TXX9_SIFCR_FRSTE 0x00000001 +#define TXX9_SIO_TX_FIFO 8 +#define TXX9_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXX9_SIFLCR_RCS 0x00001000 +#define TXX9_SIFLCR_TES 0x00000800 +#define TXX9_SIFLCR_RTSSC 0x00000200 +#define TXX9_SIFLCR_RSDE 0x00000100 +#define TXX9_SIFLCR_TSDE 0x00000080 +#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e +#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e +#define TXX9_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXX9_SIBGR_BCLK_MASK 0x00000300 +#define TXX9_SIBGR_BCLK_T0 0x00000000 +#define TXX9_SIBGR_BCLK_T2 0x00000100 +#define TXX9_SIBGR_BCLK_T4 0x00000200 +#define TXX9_SIBGR_BCLK_T6 0x00000300 +#define TXX9_SIBGR_BRD_MASK 0x000000ff + +static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +{ + switch (up->port.iotype) { + default: + return __raw_readl(up->port.membase + offset); + case UPIO_PORT: + return inl(up->port.iobase + offset); + } +} + +static inline void +sio_out(struct uart_txx9_port *up, int offset, int value) +{ + switch (up->port.iotype) { + default: + __raw_writel(value, up->port.membase + offset); + break; + case UPIO_PORT: + outl(value, up->port.iobase + offset); + break; + } +} + +static inline void +sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) & ~value); +} +static inline void +sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) | value); +} + +static inline void +sio_quot_set(struct uart_txx9_port *up, int quot) +{ + quot >>= 1; + if (quot < 256) + sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); + else if (quot < (256 << 2)) + sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); + else if (quot < (256 << 4)) + sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); + else if (quot < (256 << 6)) + sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); + else + sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); +} + +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + +static void serial_txx9_stop_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_start_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_stop_rx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; +} + +static void serial_txx9_enable_ms(struct uart_port *port) +{ + /* TXX9-SIO can not control DTR... */ +} + +static void serial_txx9_initialize(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int tmout = 10000; + + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + mmiowb(); + udelay(1); + while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) + udelay(1); + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + sio_out(up, TXX9_SIDICR, 0); +} + +static inline void +receive_chars(struct uart_txx9_port *up, unsigned int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned int disr = *status; + int max_count = 256; + char flag; + unsigned int next_ignore_status_mask; + + do { + ch = sio_in(up, TXX9_SIRFIFO); + flag = TTY_NORMAL; + up->port.icount.rx++; + + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; + if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | + TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { + /* + * For statistics only + */ + if (disr & TXX9_SIDISR_UBRK) { + disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (disr & TXX9_SIDISR_UPER) + up->port.icount.parity++; + else if (disr & TXX9_SIDISR_UFER) + up->port.icount.frame++; + if (disr & TXX9_SIDISR_UOER) { + up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } + + /* + * Mask off conditions which should be ingored. + */ + disr &= up->port.read_status_mask; + + if (disr & TXX9_SIDISR_UBRK) { + flag = TTY_BREAK; + } else if (disr & TXX9_SIDISR_UPER) + flag = TTY_PARITY; + else if (disr & TXX9_SIDISR_UFER) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + + ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; + disr = sio_in(up, TXX9_SIDISR); + } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + *status = disr; +} + +static inline void transmit_chars(struct uart_txx9_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + sio_out(up, TXX9_SITFIFO, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_txx9_stop_tx(&up->port); + return; + } + + count = TXX9_SIO_TX_FIFO; + do { + sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_txx9_stop_tx(&up->port); +} + +static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) +{ + int pass_counter = 0; + struct uart_txx9_port *up = dev_id; + unsigned int status; + + while (1) { + spin_lock(&up->port.lock); + status = sio_in(up, TXX9_SIDISR); + if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) + status &= ~TXX9_SIDISR_TDIS; + if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT))) { + spin_unlock(&up->port.lock); + break; + } + + if (status & TXX9_SIDISR_RDIS) + receive_chars(up, &status); + if (status & TXX9_SIDISR_TDIS) + transmit_chars(up); + /* Clear TX/RX Int. Status */ + sio_mask(up, TXX9_SIDISR, + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT); + spin_unlock(&up->port.lock); + + if (pass_counter++ > PASS_LIMIT) + break; + } + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static unsigned int serial_txx9_tx_empty(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int ret; + + /* no modem control lines */ + ret = TIOCM_CAR | TIOCM_DSR; + ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; + ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; + + return ret; +} + +static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + if (mctrl & TIOCM_RTS) + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + else + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); +} + +static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + else + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_txx9_get_poll_char(struct uart_port *port) +{ + unsigned int ier; + unsigned char c; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) + ; + + c = sio_in(up, TXX9_SIRFIFO); + + /* + * Finally, clear RX interrupt status + * and restore the IER + */ + sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); + sio_out(up, TXX9_SIDICR, ier); + return c; +} + + +static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int ier; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + wait_for_xmitr(up); + /* + * Send the character out. + * If a LF, also do CR... + */ + sio_out(up, TXX9_SITFIFO, c); + if (c == 10) { + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIDICR, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial_txx9_startup(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + sio_out(up, TXX9_SIDICR, 0); + + /* + * Clear the interrupt registers. + */ + sio_out(up, TXX9_SIDISR, 0); + + retval = request_irq(up->port.irq, serial_txx9_interrupt, + IRQF_SHARED, "serial_txx9", up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Enable RX/TX */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + /* + * Finally, enable interrupts. + */ + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); + + return 0; +} + +static void serial_txx9_shutdown(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ + + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition + */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.cons && up->port.line == up->port.cons->index) { + free_irq(up->port.irq, up); + return; + } +#endif + /* reset FIFOs */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + + /* Disable RX/TX */ + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + free_irq(up->port.irq, up); +} + +static void +serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + cval = sio_in(up, TXX9_SILCR); + /* byte size and parity */ + cval &= ~TXX9_SILCR_UMODE_MASK; + switch (termios->c_cflag & CSIZE) { + case CS7: + cval |= TXX9_SILCR_UMODE_7BIT; + break; + default: + case CS5: /* not supported */ + case CS6: /* not supported */ + case CS8: + cval |= TXX9_SILCR_UMODE_8BIT; + break; + } + + cval &= ~TXX9_SILCR_USBL_MASK; + if (termios->c_cflag & CSTOPB) + cval |= TXX9_SILCR_USBL_2BIT; + else + cval |= TXX9_SILCR_USBL_1BIT; + cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); + if (termios->c_cflag & PARENB) + cval |= TXX9_SILCR_UPEN; + if (!(termios->c_cflag & PARODD)) + cval |= TXX9_SILCR_UEPS; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); + quot = uart_get_divisor(port, baud); + + /* Set up FIFOs */ + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = TXX9_SIDISR_UOER | + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= TXX9_SIDISR_UBRK; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + + /* CTS flow control flag */ + if ((termios->c_cflag & CRTSCTS) && + (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + sio_set(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } else { + sio_mask(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } + + sio_out(up, TXX9_SILCR, cval); + sio_quot_set(up, quot); + sio_out(up, TXX9_SIFCR, fcr); + + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_txx9_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + /* + * If oldstate was -1 this is called from + * uart_configure_port(). In this case do not initialize the + * port now, because the port was already initialized (for + * non-console port) or should not be initialized here (for + * console port). If we initialized the port here we lose + * serial console settings. + */ + if (state == 0 && oldstate != -1) + serial_txx9_initialize(port); +} + +static int serial_txx9_request_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + int ret = 0; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial_txx9")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial_txx9_release_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static void serial_txx9_release_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + serial_txx9_release_resource(up); +} + +static int serial_txx9_request_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + return serial_txx9_request_resource(up); +} + +static void serial_txx9_config_port(struct uart_port *port, int uflags) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial_txx9_request_resource(up); + if (ret < 0) + return; + port->type = PORT_TXX9; + up->port.fifosize = TXX9_SIO_TX_FIFO; + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.line == up->port.cons->index) + return; +#endif + serial_txx9_initialize(port); +} + +static const char * +serial_txx9_type(struct uart_port *port) +{ + return "txx9"; +} + +static struct uart_ops serial_txx9_pops = { + .tx_empty = serial_txx9_tx_empty, + .set_mctrl = serial_txx9_set_mctrl, + .get_mctrl = serial_txx9_get_mctrl, + .stop_tx = serial_txx9_stop_tx, + .start_tx = serial_txx9_start_tx, + .stop_rx = serial_txx9_stop_rx, + .enable_ms = serial_txx9_enable_ms, + .break_ctl = serial_txx9_break_ctl, + .startup = serial_txx9_startup, + .shutdown = serial_txx9_shutdown, + .set_termios = serial_txx9_set_termios, + .pm = serial_txx9_pm, + .type = serial_txx9_type, + .release_port = serial_txx9_release_port, + .request_port = serial_txx9_request_port, + .config_port = serial_txx9_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_txx9_get_poll_char, + .poll_put_char = serial_txx9_put_poll_char, +#endif +}; + +static struct uart_txx9_port serial_txx9_ports[UART_NR]; + +static void __init serial_txx9_register_ports(struct uart_driver *drv, + struct device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + up->port.line = i; + up->port.ops = &serial_txx9_pops; + up->port.dev = dev; + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_txx9_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + unsigned int ier, flcr; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + /* + * Disable flow-control if enabled (and unnecessary) + */ + flcr = sio_in(up, TXX9_SIFLCR); + if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); + + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIFLCR, flcr); + sio_out(up, TXX9_SIDICR, ier); +} + +static int __init serial_txx9_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_txx9_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + up = &serial_txx9_ports[co->index]; + port = &up->port; + if (!port->ops) + return -ENODEV; + + serial_txx9_initialize(&up->port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial_txx9_reg; +static struct console serial_txx9_console = { + .name = TXX9_TTY_NAME, + .write = serial_txx9_console_write, + .device = uart_console_device, + .setup = serial_txx9_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_txx9_reg, +}; + +static int __init serial_txx9_console_init(void) +{ + register_console(&serial_txx9_console); + return 0; +} +console_initcall(serial_txx9_console_init); + +#define SERIAL_TXX9_CONSOLE &serial_txx9_console +#else +#define SERIAL_TXX9_CONSOLE NULL +#endif + +static struct uart_driver serial_txx9_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_txx9", + .dev_name = TXX9_TTY_NAME, + .major = TXX9_TTY_MAJOR, + .minor = TXX9_TTY_MINOR_START, + .nr = UART_NR, + .cons = SERIAL_TXX9_CONSOLE, +}; + +int __init early_serial_txx9_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial_txx9_ports)) + return -ENODEV; + + serial_txx9_ports[port->line].port = *port; + serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; + serial_txx9_ports[port->line].port.flags |= + UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + return 0; +} + +static DEFINE_MUTEX(serial_txx9_mutex); + +/** + * serial_txx9_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +static int __devinit serial_txx9_register_port(struct uart_port *port) +{ + int i; + struct uart_txx9_port *uart; + int ret = -ENOSPC; + + mutex_lock(&serial_txx9_mutex); + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (uart_match_port(&uart->port, port)) { + uart_remove_one_port(&serial_txx9_reg, &uart->port); + break; + } + } + if (i == UART_NR) { + /* Find unused port */ + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (!(uart->port.iobase || uart->port.mapbase)) + break; + } + } + if (i < UART_NR) { + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.uartclk = port->uartclk; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags + | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart->port.mapbase = port->mapbase; + if (port->dev) + uart->port.dev = port->dev; + ret = uart_add_one_port(&serial_txx9_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_txx9_mutex); + return ret; +} + +/** + * serial_txx9_unregister_port - remove a txx9 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +static void __devexit serial_txx9_unregister_port(int line) +{ + struct uart_txx9_port *uart = &serial_txx9_ports[line]; + + mutex_lock(&serial_txx9_mutex); + uart_remove_one_port(&serial_txx9_reg, &uart->port); + uart->port.flags = 0; + uart->port.type = PORT_UNKNOWN; + uart->port.iobase = 0; + uart->port.mapbase = 0; + uart->port.membase = NULL; + uart->port.dev = NULL; + mutex_unlock(&serial_txx9_mutex); +} + +/* + * Register a set of serial devices attached to a platform device. + */ +static int __devinit serial_txx9_probe(struct platform_device *dev) +{ + struct uart_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i; + + memset(&port, 0, sizeof(struct uart_port)); + for (i = 0; p && p->uartclk != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = &dev->dev; + ret = serial_txx9_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial_txx9_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.dev == &dev->dev) + serial_txx9_unregister_port(i); + } + return 0; +} + +#ifdef CONFIG_PM +static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, &up->port); + } + + return 0; +} + +static int serial_txx9_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, &up->port); + } + + return 0; +} +#endif + +static struct platform_driver serial_txx9_plat_driver = { + .probe = serial_txx9_probe, + .remove = __devexit_p(serial_txx9_remove), +#ifdef CONFIG_PM + .suspend = serial_txx9_suspend, + .resume = serial_txx9_resume, +#endif + .driver = { + .name = "serial_txx9", + .owner = THIS_MODULE, + }, +}; + +#ifdef ENABLE_SERIAL_TXX9_PCI +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct uart_port port; + int line; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + memset(&port, 0, sizeof(port)); + port.ops = &serial_txx9_pops; + port.flags |= UPF_TXX9_HAVE_CTS_LINE; + port.uartclk = 66670000; + port.irq = dev->irq; + port.iotype = UPIO_PORT; + port.iobase = pci_resource_start(dev, 1); + port.dev = &dev->dev; + line = serial_txx9_register_port(&port); + if (line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + pci_disable_device(dev); + return line; + } + pci_set_drvdata(dev, &serial_txx9_ports[line]); + + return 0; +} + +static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + if (up) { + serial_txx9_unregister_port(up->port.line); + pci_disable_device(dev); + } +} + +#ifdef CONFIG_PM +static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) + uart_suspend_port(&serial_txx9_reg, &up->port); + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_txx9_resume_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + if (up) + uart_resume_port(&serial_txx9_reg, &up->port); + return 0; +} +#endif + +static const struct pci_device_id serial_txx9_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, + { 0, } +}; + +static struct pci_driver serial_txx9_pci_driver = { + .name = "serial_txx9", + .probe = pciserial_txx9_init_one, + .remove = __devexit_p(pciserial_txx9_remove_one), +#ifdef CONFIG_PM + .suspend = pciserial_txx9_suspend_one, + .resume = pciserial_txx9_resume_one, +#endif + .id_table = serial_txx9_pci_tbl, +}; + +MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); +#endif /* ENABLE_SERIAL_TXX9_PCI */ + +static struct platform_device *serial_txx9_plat_devs; + +static int __init serial_txx9_init(void) +{ + int ret; + + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); + + ret = uart_register_driver(&serial_txx9_reg); + if (ret) + goto out; + + serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); + if (!serial_txx9_plat_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial_txx9_plat_devs); + if (ret) + goto put_dev; + + serial_txx9_register_ports(&serial_txx9_reg, + &serial_txx9_plat_devs->dev); + + ret = platform_driver_register(&serial_txx9_plat_driver); + if (ret) + goto del_dev; + +#ifdef ENABLE_SERIAL_TXX9_PCI + ret = pci_register_driver(&serial_txx9_pci_driver); +#endif + if (ret == 0) + goto out; + + del_dev: + platform_device_del(serial_txx9_plat_devs); + put_dev: + platform_device_put(serial_txx9_plat_devs); + unreg_uart_drv: + uart_unregister_driver(&serial_txx9_reg); + out: + return ret; +} + +static void __exit serial_txx9_exit(void) +{ + int i; + +#ifdef ENABLE_SERIAL_TXX9_PCI + pci_unregister_driver(&serial_txx9_pci_driver); +#endif + platform_driver_unregister(&serial_txx9_plat_driver); + platform_device_unregister(serial_txx9_plat_devs); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } + + uart_unregister_driver(&serial_txx9_reg); +} + +module_init(serial_txx9_init); +module_exit(serial_txx9_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TX39/49 serial driver"); + +MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c new file mode 100644 index 0000000..c291b3a --- /dev/null +++ b/drivers/tty/serial/sh-sci.c @@ -0,0 +1,2027 @@ +/* + * drivers/serial/sh-sci.c + * + * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) + * + * Copyright (C) 2002 - 2008 Paul Mundt + * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). + * + * based off of the old drivers/char/sh-sci.c by: + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2000 Sugioka Toshinobu + * Modified to support multiple serial ports. Stuart Menefy (May 2000). + * Modified to support SecureEdge. David McCullough (2002) + * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). + * Removed SH7300 support (Jul 2007). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SUPERH +#include +#endif + +#ifdef CONFIG_H8300 +#include +#endif + +#include "sh-sci.h" + +struct sci_port { + struct uart_port port; + + /* Port type */ + unsigned int type; + + /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ + unsigned int irqs[SCIx_NR_IRQS]; + + /* Port enable callback */ + void (*enable)(struct uart_port *port); + + /* Port disable callback */ + void (*disable)(struct uart_port *port); + + /* Break timer */ + struct timer_list break_timer; + int break_flag; + + /* Interface clock */ + struct clk *iclk; + /* Function clock */ + struct clk *fclk; + + struct list_head node; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct device *dma_dev; + unsigned int slave_tx; + unsigned int slave_rx; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx[2]; + dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx[2]; + dma_cookie_t active_rx; + struct scatterlist sg_tx; + unsigned int sg_len_tx; + struct scatterlist sg_rx[2]; + size_t buf_len_rx; + struct sh_dmae_slave param_tx; + struct sh_dmae_slave param_rx; + struct work_struct work_tx; + struct work_struct work_rx; + struct timer_list rx_timer; + unsigned int rx_timeout; +#endif +}; + +struct sh_sci_priv { + spinlock_t lock; + struct list_head ports; + struct notifier_block clk_nb; +}; + +/* Function prototypes */ +static void sci_stop_tx(struct uart_port *port); + +#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS + +static struct sci_port sci_ports[SCI_NPORTS]; +static struct uart_driver sci_uart_driver; + +static inline struct sci_port * +to_sci_port(struct uart_port *uart) +{ + return container_of(uart, struct sci_port, port); +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) + +#ifdef CONFIG_CONSOLE_POLL +static inline void handle_error(struct uart_port *port) +{ + /* Clear error flags */ + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); +} + +static int sci_poll_get_char(struct uart_port *port) +{ + unsigned short status; + int c; + + do { + status = sci_in(port, SCxSR); + if (status & SCxSR_ERRORS(port)) { + handle_error(port); + continue; + } + break; + } while (1); + + if (!(status & SCxSR_RDxF(port))) + return NO_POLL_CHAR; + + c = sci_in(port, SCxRDR); + + /* Dummy read */ + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + + return c; +} +#endif + +static void sci_poll_put_char(struct uart_port *port, unsigned char c) +{ + unsigned short status; + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TDxE(port))); + + sci_out(port, SCxTDR, c); + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); +} +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ + +#if defined(__H8300H__) || defined(__H8300S__) +static void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + int ch = (port->mapbase - SMR0) >> 3; + + /* set DDR regs */ + H8300_GPIO_DDR(h8300_sci_pins[ch].port, + h8300_sci_pins[ch].rx, + H8300_GPIO_INPUT); + H8300_GPIO_DDR(h8300_sci_pins[ch].port, + h8300_sci_pins[ch].tx, + H8300_GPIO_OUTPUT); + + /* tx mark output*/ + H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (port->mapbase == 0xA4400000) { + __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); + __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); + } else if (port->mapbase == 0xA4410000) + __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (cflag & CRTSCTS) { + /* enable RTS/CTS */ + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 9-2; enable all scif pins but sck */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xfc03), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 9-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xfc03), PORT_PVCR); + } + } else { + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 5-2; enable only tx and rx */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xffc3), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 5-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xffc3), PORT_PVCR); + } + } +} +#elif defined(CONFIG_CPU_SH3) +/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ + __raw_writew(data & 0x0fcf, SCPCR); + + if (!(cflag & CRTSCTS)) { + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP4MD1,0, + Set SCP6MD1,0 = {01} (output) */ + __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + + data = __raw_readb(SCPDR); + /* Set /RTS2 (bit6) = 0 */ + __raw_writeb(data & 0xbf, SCPDR); + } +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (port->mapbase == 0xffe00000) { + data = __raw_readw(PSCR); + data &= ~0x03cf; + if (!(cflag & CRTSCTS)) + data |= 0x0340; + + __raw_writew(data, PSCR); + } +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (!(cflag & CRTSCTS)) + __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ +} +#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (!(cflag & CRTSCTS)) + __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ +} +#else +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + /* Nothing to do */ +} +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +static int scif_txfill(struct uart_port *port) +{ + return sci_in(port, SCTFDR) & 0xff; +} + +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + return sci_in(port, SCRFDR) & 0xff; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +static int scif_txfill(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) + /* SCIF0/1*/ + return sci_in(port, SCTFDR) & 0xff; + else + /* SCIF2 */ + return sci_in(port, SCFDR) >> 8; +} + +static int scif_txroom(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) + /* SCIF0/1*/ + return SCIF_TXROOM_MAX - scif_txfill(port); + else + /* SCIF2 */ + return SCIF2_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + if ((port->mapbase == 0xffe00000) || + (port->mapbase == 0xffe08000)) { + /* SCIF0/1*/ + return sci_in(port, SCRFDR) & 0xff; + } else { + /* SCIF2 */ + return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; + } +} +#elif defined(CONFIG_ARCH_SH7372) +static int scif_txfill(struct uart_port *port) +{ + if (port->type == PORT_SCIFA) + return sci_in(port, SCFDR) >> 8; + else + return sci_in(port, SCTFDR); +} + +static int scif_txroom(struct uart_port *port) +{ + return port->fifosize - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + if (port->type == PORT_SCIFA) + return sci_in(port, SCFDR) & SCIF_RFDC_MASK; + else + return sci_in(port, SCRFDR); +} +#else +static int scif_txfill(struct uart_port *port) +{ + return sci_in(port, SCFDR) >> 8; +} + +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + return sci_in(port, SCFDR) & SCIF_RFDC_MASK; +} +#endif + +static int sci_txfill(struct uart_port *port) +{ + return !(sci_in(port, SCxSR) & SCI_TDRE); +} + +static int sci_txroom(struct uart_port *port) +{ + return !sci_txfill(port); +} + +static int sci_rxfill(struct uart_port *port) +{ + return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; +} + +/* ********************************************************************** * + * the interrupt related routines * + * ********************************************************************** */ + +static void sci_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int stopped = uart_tx_stopped(port); + unsigned short status; + unsigned short ctrl; + int count; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_TDxE(port))) { + ctrl = sci_in(port, SCSCR); + if (uart_circ_empty(xmit)) + ctrl &= ~SCI_CTRL_FLAGS_TIE; + else + ctrl |= SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + return; + } + + if (port->type == PORT_SCI) + count = sci_txroom(port); + else + count = scif_txroom(port); + + do { + unsigned char c; + + if (port->x_char) { + c = port->x_char; + port->x_char = 0; + } else if (!uart_circ_empty(xmit) && !stopped) { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else { + break; + } + + sci_out(port, SCxTDR, c); + + port->icount.tx++; + } while (--count > 0); + + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (uart_circ_empty(xmit)) { + sci_stop_tx(port); + } else { + ctrl = sci_in(port, SCSCR); + + if (port->type != PORT_SCI) { + sci_in(port, SCxSR); /* Dummy read */ + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + } + + ctrl |= SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + } +} + +/* On SH3, SCIF may read end-of-break as a space->mark char */ +#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) + +static inline void sci_receive_chars(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + struct tty_struct *tty = port->state->port.tty; + int i, count, copied = 0; + unsigned short status; + unsigned char flag; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_RDxF(port))) + return; + + while (1) { + if (port->type == PORT_SCI) + count = sci_rxfill(port); + else + count = scif_rxfill(port); + + /* Don't copy more bytes than there is room for in the buffer */ + count = tty_buffer_request_room(tty, count); + + /* If for any reason we can't copy more data, we're done! */ + if (count == 0) + break; + + if (port->type == PORT_SCI) { + char c = sci_in(port, SCxRDR); + if (uart_handle_sysrq_char(port, c) || + sci_port->break_flag) + count = 0; + else + tty_insert_flip_char(tty, c, TTY_NORMAL); + } else { + for (i = 0; i < count; i++) { + char c = sci_in(port, SCxRDR); + status = sci_in(port, SCxSR); +#if defined(CONFIG_CPU_SH3) + /* Skip "chars" during break */ + if (sci_port->break_flag) { + if ((c == 0) && + (status & SCxSR_FER(port))) { + count--; i--; + continue; + } + + /* Nonzero => end-of-break */ + dev_dbg(port->dev, "debounce<%02x>\n", c); + sci_port->break_flag = 0; + + if (STEPFN(c)) { + count--; i--; + continue; + } + } +#endif /* CONFIG_CPU_SH3 */ + if (uart_handle_sysrq_char(port, c)) { + count--; i--; + continue; + } + + /* Store data and status */ + if (status & SCxSR_FER(port)) { + flag = TTY_FRAME; + dev_notice(port->dev, "frame error\n"); + } else if (status & SCxSR_PER(port)) { + flag = TTY_PARITY; + dev_notice(port->dev, "parity error\n"); + } else + flag = TTY_NORMAL; + + tty_insert_flip_char(tty, c, flag); + } + } + + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + + copied += count; + port->icount.rx += count; + } + + if (copied) { + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tty); + } else { + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } +} + +#define SCI_BREAK_JIFFIES (HZ/20) +/* The sci generates interrupts during the break, + * 1 per millisecond or so during the break period, for 9600 baud. + * So dont bother disabling interrupts. + * But dont want more than 1 break event. + * Use a kernel timer to periodically poll the rx line until + * the break is finished. + */ +static void sci_schedule_break_timer(struct sci_port *port) +{ + port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; + add_timer(&port->break_timer); +} +/* Ensure that two consecutive samples find the break over. */ +static void sci_break_timer(unsigned long data) +{ + struct sci_port *port = (struct sci_port *)data; + + if (sci_rxd_in(&port->port) == 0) { + port->break_flag = 1; + sci_schedule_break_timer(port); + } else if (port->break_flag == 1) { + /* break is over. */ + port->break_flag = 2; + sci_schedule_break_timer(port); + } else + port->break_flag = 0; +} + +static inline int sci_handle_errors(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->state->port.tty; + + if (status & SCxSR_ORER(port)) { + /* overrun error */ + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + copied++; + + dev_notice(port->dev, "overrun error"); + } + + if (status & SCxSR_FER(port)) { + if (sci_rxd_in(port) == 0) { + /* Notify of BREAK */ + struct sci_port *sci_port = to_sci_port(port); + + if (!sci_port->break_flag) { + sci_port->break_flag = 1; + sci_schedule_break_timer(sci_port); + + /* Do sysrq handling. */ + if (uart_handle_break(port)) + return 0; + + dev_dbg(port->dev, "BREAK detected\n"); + + if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + copied++; + } + + } else { + /* frame error */ + if (tty_insert_flip_char(tty, 0, TTY_FRAME)) + copied++; + + dev_notice(port->dev, "frame error\n"); + } + } + + if (status & SCxSR_PER(port)) { + /* parity error */ + if (tty_insert_flip_char(tty, 0, TTY_PARITY)) + copied++; + + dev_notice(port->dev, "parity error"); + } + + if (copied) + tty_flip_buffer_push(tty); + + return copied; +} + +static inline int sci_handle_fifo_overrun(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + int copied = 0; + + if (port->type != PORT_SCIF) + return 0; + + if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + sci_out(port, SCLSR, 0); + + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_flip_buffer_push(tty); + + dev_notice(port->dev, "overrun error\n"); + copied++; + } + + return copied; +} + +static inline int sci_handle_breaks(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); + + if (uart_handle_break(port)) + return 0; + + if (!s->break_flag && status & SCxSR_BRK(port)) { +#if defined(CONFIG_CPU_SH3) + /* Debounce break */ + s->break_flag = 1; +#endif + /* Notify of BREAK */ + if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + copied++; + + dev_dbg(port->dev, "BREAK detected\n"); + } + + if (copied) + tty_flip_buffer_push(tty); + + copied += sci_handle_fifo_overrun(port); + + return copied; +} + +static irqreturn_t sci_rx_interrupt(int irq, void *ptr) +{ +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + + if (s->chan_rx) { + u16 scr = sci_in(port, SCSCR); + u16 ssr = sci_in(port, SCxSR); + + /* Disable future Rx interrupts */ + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + disable_irq_nosync(irq); + scr |= 0x4000; + } else { + scr &= ~SCI_CTRL_FLAGS_RIE; + } + sci_out(port, SCSCR, scr); + /* Clear current interrupt */ + sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); + dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", + jiffies, s->rx_timeout); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); + + return IRQ_HANDLED; + } +#endif + + /* I think sci_receive_chars has to be called irrespective + * of whether the I_IXOFF is set, otherwise, how is the interrupt + * to be disabled? + */ + sci_receive_chars(ptr); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_tx_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + sci_transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_er_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle errors */ + if (port->type == PORT_SCI) { + if (sci_handle_errors(port)) { + /* discard character in rx buffer */ + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } + } else { + sci_handle_fifo_overrun(port); + sci_rx_interrupt(irq, ptr); + } + + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + + /* Kick the transmission */ + sci_tx_interrupt(irq, ptr); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_br_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle BREAKs */ + sci_handle_breaks(port); + sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) +{ + unsigned short ssr_status, scr_status, err_enabled; + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + irqreturn_t ret = IRQ_NONE; + + ssr_status = sci_in(port, SCxSR); + scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); + + /* Tx Interrupt */ + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && + !s->chan_tx) + ret = sci_tx_interrupt(irq, ptr); + /* + * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / + * DR flags + */ + if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && + (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); + /* Error Interrupt */ + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) + ret = sci_er_interrupt(irq, ptr); + /* Break Interrupt */ + if ((ssr_status & SCxSR_BRK(port)) && err_enabled) + ret = sci_br_interrupt(irq, ptr); + + return ret; +} + +/* + * Here we define a transistion notifier so that we can update all of our + * ports' baud rate when the peripheral clock changes. + */ +static int sci_notifier(struct notifier_block *self, + unsigned long phase, void *p) +{ + struct sh_sci_priv *priv = container_of(self, + struct sh_sci_priv, clk_nb); + struct sci_port *sci_port; + unsigned long flags; + + if ((phase == CPUFREQ_POSTCHANGE) || + (phase == CPUFREQ_RESUMECHANGE)) { + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(sci_port, &priv->ports, node) + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + spin_unlock_irqrestore(&priv->lock, flags); + } + + return NOTIFY_OK; +} + +static void sci_clk_enable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_enable(sci_port->iclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + clk_enable(sci_port->fclk); +} + +static void sci_clk_disable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_disable(sci_port->fclk); + clk_disable(sci_port->iclk); +} + +static int sci_request_irq(struct sci_port *port) +{ + int i; + irqreturn_t (*handlers[4])(int irq, void *ptr) = { + sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, + sci_br_interrupt, + }; + const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", + "SCI Transmit Data Empty", "SCI Break" }; + + if (port->irqs[0] == port->irqs[1]) { + if (unlikely(!port->irqs[0])) + return -ENODEV; + + if (request_irq(port->irqs[0], sci_mpxed_interrupt, + IRQF_DISABLED, "sci", port)) { + dev_err(port->port.dev, "Can't allocate IRQ\n"); + return -ENODEV; + } + } else { + for (i = 0; i < ARRAY_SIZE(handlers); i++) { + if (unlikely(!port->irqs[i])) + continue; + + if (request_irq(port->irqs[i], handlers[i], + IRQF_DISABLED, desc[i], port)) { + dev_err(port->port.dev, "Can't allocate IRQ\n"); + return -ENODEV; + } + } + } + + return 0; +} + +static void sci_free_irq(struct sci_port *port) +{ + int i; + + if (port->irqs[0] == port->irqs[1]) + free_irq(port->irqs[0], port); + else { + for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { + if (!port->irqs[i]) + continue; + + free_irq(port->irqs[i], port); + } + } +} + +static unsigned int sci_tx_empty(struct uart_port *port) +{ + unsigned short status = sci_in(port, SCxSR); + unsigned short in_tx_fifo = scif_txfill(port); + + return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; +} + +static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ + /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ + /* If you have signals for DTR and DCD, please implement here. */ +} + +static unsigned int sci_get_mctrl(struct uart_port *port) +{ + /* This routine is used for getting signals of: DTR, DCD, DSR, RI, + and CTS/RTS */ + + return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; +} + +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static void sci_dma_tx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail += sg_dma_len(&s->sg_tx); + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += sg_dma_len(&s->sg_tx); + + async_tx_ack(s->desc_tx); + s->cookie_tx = -EINVAL; + s->desc_tx = NULL; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + schedule_work(&s->work_tx); + } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Locking: called with port lock held */ +static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, + size_t count) +{ + struct uart_port *port = &s->port; + int i, active, room; + + room = tty_buffer_request_room(tty, count); + + if (s->active_rx == s->cookie_rx[0]) { + active = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + active = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return 0; + } + + if (room < count) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + count - room); + if (!room) + return room; + + for (i = 0; i < room; i++) + tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], + TTY_NORMAL); + + port->icount.rx += room; + + return room; +} + +static void sci_dma_rx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct tty_struct *tty = port->state->port.tty; + unsigned long flags; + int count; + + dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); + + spin_lock_irqsave(&port->lock, flags); + + count = sci_dma_rx_push(s, tty, s->buf_len_rx); + + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); + + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + schedule_work(&s->work_rx); +} + +static void sci_start_rx(struct uart_port *port); +static void sci_start_tx(struct uart_port *port); + +static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + + s->chan_rx = NULL; + s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; + dma_release_channel(chan); + if (sg_dma_address(&s->sg_rx[0])) + dma_free_coherent(port->dev, s->buf_len_rx * 2, + sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); + if (enable_pio) + sci_start_rx(port); +} + +static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + + s->chan_tx = NULL; + s->cookie_tx = -EINVAL; + dma_release_channel(chan); + if (enable_pio) + sci_start_tx(port); +} + +static void sci_submit_rx(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_rx; + int i; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + struct dma_async_tx_descriptor *desc; + + desc = chan->device->device_prep_slave_sg(chan, + sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); + + if (desc) { + s->desc_rx[i] = desc; + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[i] = desc->tx_submit(desc); + } + + if (!desc || s->cookie_rx[i] < 0) { + if (i) { + async_tx_ack(s->desc_rx[0]); + s->cookie_rx[0] = -EINVAL; + } + if (desc) { + async_tx_ack(desc); + s->cookie_rx[i] = -EINVAL; + } + dev_warn(s->port.dev, + "failed to re-start DMA, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, + s->cookie_rx[i], i); + } + + s->active_rx = s->cookie_rx[0]; + + dma_async_issue_pending(chan); +} + +static void work_fn_rx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_rx); + struct uart_port *port = &s->port; + struct dma_async_tx_descriptor *desc; + int new; + + if (s->active_rx == s->cookie_rx[0]) { + new = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + new = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return; + } + desc = s->desc_rx[new]; + + if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != + DMA_SUCCESS) { + /* Handle incomplete DMA receive */ + struct tty_struct *tty = port->state->port.tty; + struct dma_chan *chan = s->chan_rx; + struct sh_desc *sh_desc = container_of(desc, struct sh_desc, + async_tx); + unsigned long flags; + int count; + + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dev_dbg(port->dev, "Read %u bytes with cookie %d\n", + sh_desc->partial, sh_desc->cookie); + + spin_lock_irqsave(&port->lock, flags); + count = sci_dma_rx_push(s, tty, sh_desc->partial); + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + sci_submit_rx(s); + + return; + } + + s->cookie_rx[new] = desc->tx_submit(desc); + if (s->cookie_rx[new] < 0) { + dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); + sci_rx_dma_release(s, true); + return; + } + + s->active_rx = s->cookie_rx[!new]; + + dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, + s->cookie_rx[new], new, s->active_rx); +} + +static void work_fn_tx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_tx); + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = &s->sg_tx; + + /* + * DMA is idle now. + * Port xmit buffer is already mapped, and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, we have to + * transmit till the end, and then the rest. Take the port lock to get a + * consistent xmit buffer state. + */ + spin_lock_irq(&port->lock); + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); + spin_unlock_irq(&port->lock); + + BUG_ON(!sg_dma_len(sg)); + + desc = chan->device->device_prep_slave_sg(chan, + sg, s->sg_len_tx, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); + + spin_lock_irq(&port->lock); + s->desc_tx = desc; + desc->callback = sci_dma_tx_complete; + desc->callback_param = s; + spin_unlock_irq(&port->lock); + s->cookie_tx = desc->tx_submit(desc); + if (s->cookie_tx < 0) { + dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, + xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + + dma_async_issue_pending(chan); +} +#endif + +static void sci_start_tx(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned short ctrl; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 new, scr = sci_in(port, SCSCR); + if (s->chan_tx) + new = scr | 0x8000; + else + new = scr & ~0x8000; + if (new != scr) + sci_out(port, SCSCR, new); + } + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + s->cookie_tx < 0) + schedule_work(&s->work_tx); +#endif + if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); + } +} + +static void sci_stop_tx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x8000; + ctrl &= ~SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); +} + +static void sci_start_rx(struct uart_port *port) +{ + unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; + + /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ + ctrl |= sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x4000; + sci_out(port, SCSCR, ctrl); +} + +static void sci_stop_rx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x4000; + ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); + sci_out(port, SCSCR, ctrl); +} + +static void sci_enable_ms(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static void sci_break_ctl(struct uart_port *port, int break_state) +{ + /* Nothing here yet .. */ +} + +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static bool filter(struct dma_chan *chan, void *slave) +{ + struct sh_dmae_slave *param = slave; + + dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, + param->slave_id); + + if (param->dma_dev == chan->device->dev) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void rx_timer_fn(unsigned long arg) +{ + struct sci_port *s = (struct sci_port *)arg; + struct uart_port *port = &s->port; + u16 scr = sci_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + scr &= ~0x4000; + enable_irq(s->irqs[1]); + } + sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); + dev_dbg(port->dev, "DMA Rx timed out\n"); + schedule_work(&s->work_rx); +} + +static void sci_request_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct sh_dmae_slave *param; + struct dma_chan *chan; + dma_cap_mask_t mask; + int nent; + + dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, + port->line, s->dma_dev); + + if (!s->dma_dev) + return; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + param = &s->param_tx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ + param->slave_id = s->slave_tx; + param->dma_dev = s->dma_dev; + + s->cookie_tx = -EINVAL; + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); + if (chan) { + s->chan_tx = chan; + sg_init_table(&s->sg_tx, 1); + /* UART circular tx buffer is an aligned page. */ + BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), + UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); + if (!nent) + sci_tx_dma_release(s, false); + else + dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + sg_dma_len(&s->sg_tx), + port->state->xmit.buf, sg_dma_address(&s->sg_tx)); + + s->sg_len_tx = nent; + + INIT_WORK(&s->work_tx, work_fn_tx); + } + + param = &s->param_rx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ + param->slave_id = s->slave_rx; + param->dma_dev = s->dma_dev; + + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); + if (chan) { + dma_addr_t dma[2]; + void *buf[2]; + int i; + + s->chan_rx = chan; + + s->buf_len_rx = 2 * max(16, (int)port->fifosize); + buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, + &dma[0], GFP_KERNEL); + + if (!buf[0]) { + dev_warn(port->dev, + "failed to allocate dma buffer, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + + buf[1] = buf[0] + s->buf_len_rx; + dma[1] = dma[0] + s->buf_len_rx; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + + sg_init_table(sg, 1); + sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, + (int)buf[i] & ~PAGE_MASK); + sg_dma_address(sg) = dma[i]; + } + + INIT_WORK(&s->work_rx, work_fn_rx); + setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); + + sci_submit_rx(s); + } +} + +static void sci_free_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (!s->dma_dev) + return; + + if (s->chan_tx) + sci_tx_dma_release(s, false); + if (s->chan_rx) + sci_rx_dma_release(s, false); +} +#endif + +static int sci_startup(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + if (s->enable) + s->enable(port); + + sci_request_irq(s); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_request_dma(port); +#endif + sci_start_tx(port); + sci_start_rx(port); + + return 0; +} + +static void sci_shutdown(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + sci_stop_rx(port); + sci_stop_tx(port); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_free_dma(port); +#endif + sci_free_irq(s); + + if (s->disable) + s->disable(port); +} + +static void sci_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct sci_port *s = to_sci_port(port); +#endif + unsigned int status, baud, smr_val, max_baud; + int t = -1; + u16 scfcr = 0; + + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) + t = SCBRR_VALUE(baud, port->uartclk); + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + + if (port->type != PORT_SCI) + sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); + + smr_val = sci_in(port, SCSMR) & 3; + if ((termios->c_cflag & CSIZE) == CS7) + smr_val |= 0x40; + if (termios->c_cflag & PARENB) + smr_val |= 0x20; + if (termios->c_cflag & PARODD) + smr_val |= 0x30; + if (termios->c_cflag & CSTOPB) + smr_val |= 0x08; + + uart_update_timeout(port, termios->c_cflag, baud); + + sci_out(port, SCSMR, smr_val); + + dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, + SCSCR_INIT(port)); + + if (t > 0) { + if (t >= 256) { + sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); + t >>= 2; + } else + sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); + + sci_out(port, SCBRR, t); + udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ + } + + sci_init_pins(port, termios->c_cflag); + sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); + + sci_out(port, SCSCR, SCSCR_INIT(port)); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + /* + * Calculate delay for 1.5 DMA buffers: see + * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits + * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function + * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." + * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO + * sizes), but it has been found out experimentally, that this is not + * enough: the driver too often needlessly runs on a DMA timeout. 20ms + * as a minimum seem to work perfectly. + */ + if (s->chan_rx) { + s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / + port->fifosize / 2; + dev_dbg(port->dev, + "DMA Rx t-out %ums, tty t-out %u jiffies\n", + s->rx_timeout * 1000 / HZ, port->timeout); + if (s->rx_timeout < msecs_to_jiffies(20)) + s->rx_timeout = msecs_to_jiffies(20); + } +#endif + + if ((termios->c_cflag & CREAD) != 0) + sci_start_rx(port); +} + +static const char *sci_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_IRDA: + return "irda"; + case PORT_SCI: + return "sci"; + case PORT_SCIF: + return "scif"; + case PORT_SCIFA: + return "scifa"; + case PORT_SCIFB: + return "scifb"; + } + + return NULL; +} + +static void sci_release_port(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static int sci_request_port(struct uart_port *port) +{ + /* Nothing here yet .. */ + return 0; +} + +static void sci_config_port(struct uart_port *port, int flags) +{ + struct sci_port *s = to_sci_port(port); + + port->type = s->type; + + if (port->membase) + return; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap_nocache(port->mapbase, 0x40); + + if (IS_ERR(port->membase)) + dev_err(port->dev, "can't remap port#%d\n", port->line); + } else { + /* + * For the simple (and majority of) cases where we don't + * need to do any remapping, just cast the cookie + * directly. + */ + port->membase = (void __iomem *)port->mapbase; + } +} + +static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sci_port *s = to_sci_port(port); + + if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) + return -EINVAL; + if (ser->baud_base < 2400) + /* No paper tape reader for Mitch.. */ + return -EINVAL; + + return 0; +} + +static struct uart_ops sci_uart_ops = { + .tx_empty = sci_tx_empty, + .set_mctrl = sci_set_mctrl, + .get_mctrl = sci_get_mctrl, + .start_tx = sci_start_tx, + .stop_tx = sci_stop_tx, + .stop_rx = sci_stop_rx, + .enable_ms = sci_enable_ms, + .break_ctl = sci_break_ctl, + .startup = sci_startup, + .shutdown = sci_shutdown, + .set_termios = sci_set_termios, + .type = sci_type, + .release_port = sci_release_port, + .request_port = sci_request_port, + .config_port = sci_config_port, + .verify_port = sci_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sci_poll_get_char, + .poll_put_char = sci_poll_put_char, +#endif +}; + +static int __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) +{ + struct uart_port *port = &sci_port->port; + + port->ops = &sci_uart_ops; + port->iotype = UPIO_MEM; + port->line = index; + + switch (p->type) { + case PORT_SCIFB: + port->fifosize = 256; + break; + case PORT_SCIFA: + port->fifosize = 64; + break; + case PORT_SCIF: + port->fifosize = 16; + break; + default: + port->fifosize = 1; + break; + } + + if (dev) { + sci_port->iclk = clk_get(&dev->dev, "sci_ick"); + if (IS_ERR(sci_port->iclk)) { + sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); + if (IS_ERR(sci_port->iclk)) { + dev_err(&dev->dev, "can't get iclk\n"); + return PTR_ERR(sci_port->iclk); + } + } + + /* + * The function clock is optional, ignore it if we can't + * find it. + */ + sci_port->fclk = clk_get(&dev->dev, "sci_fck"); + if (IS_ERR(sci_port->fclk)) + sci_port->fclk = NULL; + + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; + port->dev = &dev->dev; + } + + sci_port->break_timer.data = (unsigned long)sci_port; + sci_port->break_timer.function = sci_break_timer; + init_timer(&sci_port->break_timer); + + port->mapbase = p->mapbase; + port->membase = p->membase; + + port->irq = p->irqs[SCIx_TXI_IRQ]; + port->flags = p->flags; + sci_port->type = port->type = p->type; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_port->dma_dev = p->dma_dev; + sci_port->slave_tx = p->dma_slave_tx; + sci_port->slave_rx = p->dma_slave_rx; + + dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, + p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); +#endif + + memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + return 0; +} + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static struct tty_driver *serial_console_device(struct console *co, int *index) +{ + struct uart_driver *p = &sci_uart_driver; + *index = co->index; + return p->tty_driver; +} + +static void serial_console_putchar(struct uart_port *port, int ch) +{ + sci_poll_put_char(port, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + struct uart_port *port = co->data; + struct sci_port *sci_port = to_sci_port(port); + unsigned short bits; + + if (sci_port->enable) + sci_port->enable(port); + + uart_console_write(port, s, count, serial_console_putchar); + + /* wait until fifo is empty and last bit has been transmitted */ + bits = SCxSR_TDxE(port) | SCxSR_TEND(port); + while ((sci_in(port, SCxSR) & bits) != bits) + cpu_relax(); + + if (sci_port->disable) + sci_port->disable(port); +} + +static int __devinit serial_console_setup(struct console *co, char *options) +{ + struct sci_port *sci_port; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= SCI_NPORTS) + co->index = 0; + + if (co->data) { + port = co->data; + sci_port = to_sci_port(port); + } else { + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; + } + + /* + * Also need to check port->type, we don't actually have any + * UPIO_PORT ports, but uart_report_port() handily misreports + * it anyways if we don't have a port available by the time this is + * called. + */ + if (!port->type) + return -ENODEV; + + sci_config_port(port, 0); + + if (sci_port->enable) + sci_port->enable(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(port, co, baud, parity, bits, flow); +#if defined(__H8300H__) || defined(__H8300S__) + /* disable rx interrupt */ + if (ret == 0) + sci_stop_rx(port); +#endif + /* TODO: disable clock */ + return ret; +} + +static struct console serial_console = { + .name = "ttySC", + .device = serial_console_device, + .write = serial_console_write, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init sci_console_init(void) +{ + register_console(&serial_console); + return 0; +} +console_initcall(sci_console_init); + +static struct sci_port early_serial_port; +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, +}; +static char early_serial_buf[32]; + +#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ + +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) +#define SCI_CONSOLE (&serial_console) +#else +#define SCI_CONSOLE 0 +#endif + +static char banner[] __initdata = + KERN_INFO "SuperH SCI(F) driver initialized\n"; + +static struct uart_driver sci_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sci", + .dev_name = "ttySC", + .major = SCI_MAJOR, + .minor = SCI_MINOR_START, + .nr = SCI_NPORTS, + .cons = SCI_CONSOLE, +}; + + +static int sci_remove(struct platform_device *dev) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) { + uart_remove_one_port(&sci_uart_driver, &p->port); + clk_put(p->iclk); + clk_put(p->fclk); + } + spin_unlock_irqrestore(&priv->lock, flags); + + kfree(priv); + return 0; +} + +static int __devinit sci_probe_single(struct platform_device *dev, + unsigned int index, + struct plat_sci_port *p, + struct sci_port *sciport) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + unsigned long flags; + int ret; + + /* Sanity check */ + if (unlikely(index >= SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port " + "%d when only %d are available.\n", + index+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping " + "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + return 0; + } + + ret = sci_init_single(dev, sciport, index, p); + if (ret) + return ret; + + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + if (ret) + return ret; + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need + * remapping (such as sh64) should also set UPF_IOREMAP. + */ +static int __devinit sci_probe(struct platform_device *dev) +{ + struct plat_sci_port *p = dev->dev.platform_data; + struct sh_sci_priv *priv; + int i, ret = -EINVAL; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + if (is_early_platform_device(dev)) { + if (dev->id == -1) + return -ENOTSUPP; + early_serial_console.index = dev->id; + early_serial_console.data = &early_serial_port.port; + sci_init_single(NULL, &early_serial_port, dev->id, p); + serial_console_setup(&early_serial_console, early_serial_buf); + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + register_console(&early_serial_console); + return 0; + } +#endif + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_LIST_HEAD(&priv->ports); + spin_lock_init(&priv->lock); + platform_set_drvdata(dev, priv); + + priv->clk_nb.notifier_call = sci_notifier; + cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + + if (dev->id != -1) { + ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); + if (ret) + goto err_unreg; + } else { + for (i = 0; p && p->flags != 0; p++, i++) { + ret = sci_probe_single(dev, i, p, &sci_ports[i]); + if (ret) + goto err_unreg; + } + } + +#ifdef CONFIG_SH_STANDARD_BIOS + sh_bios_gdb_detach(); +#endif + + return 0; + +err_unreg: + sci_remove(dev); + return ret; +} + +static int sci_suspend(struct device *dev) +{ + struct sh_sci_priv *priv = dev_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_suspend_port(&sci_uart_driver, &p->port); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int sci_resume(struct device *dev) +{ + struct sh_sci_priv *priv = dev_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_resume_port(&sci_uart_driver, &p->port); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static const struct dev_pm_ops sci_dev_pm_ops = { + .suspend = sci_suspend, + .resume = sci_resume, +}; + +static struct platform_driver sci_driver = { + .probe = sci_probe, + .remove = sci_remove, + .driver = { + .name = "sh-sci", + .owner = THIS_MODULE, + .pm = &sci_dev_pm_ops, + }, +}; + +static int __init sci_init(void) +{ + int ret; + + printk(banner); + + ret = uart_register_driver(&sci_uart_driver); + if (likely(ret == 0)) { + ret = platform_driver_register(&sci_driver); + if (unlikely(ret)) + uart_unregister_driver(&sci_uart_driver); + } + + return ret; +} + +static void __exit sci_exit(void) +{ + platform_driver_unregister(&sci_driver); + uart_unregister_driver(&sci_uart_driver); +} + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif +module_init(sci_init); +module_exit(sci_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sh-sci"); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h new file mode 100644 index 0000000..4bc614e --- /dev/null +++ b/drivers/tty/serial/sh-sci.h @@ -0,0 +1,660 @@ +#include +#include +#include + +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include +#endif +#if defined(CONFIG_H8S2678) +#include +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7708) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ +# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +# define SCIF0 0xA4400000 +# define SCIF2 0xA4410000 +# define SCSMR_Ir 0xA44A0000 +# define IRDA_SCIF SCIF0 +# define SCPCR 0xA4000116 +# define SCPDR 0xA4000136 + +/* Set the clock source, + * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input + * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output + */ +# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define PORT_PTCR 0xA405011EUL +# define PORT_PVCR 0xA4050122UL +# define SCIF_ORER 0x0200 /* overrun error bit */ +#elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) +# define SCSPTR1 0xffe0001c /* 8 bit SCI */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ +# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ +# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define PACR 0xa4050100 +# define PBCR 0xa4050102 +# define SCSCR_INIT(port) 0x3B +#elif defined(CONFIG_CPU_SUBTYPE_SH7343) +# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ +# define SCSPTR1 0xffe10010 /* 16 bit SCIF */ +# define SCSPTR2 0xffe20010 /* 16 bit SCIF */ +# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +# define PADR 0xA4050120 +# define PSDR 0xA405013e +# define PWDR 0xA4050166 +# define PSCR 0xA405011E +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7366) +# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ +# define SCSPTR0 SCPDR0 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +# define SCSPTR0 0xa4050160 +# define SCSPTR1 0xa405013e +# define SCSPTR2 0xa4050160 +# define SCSPTR3 0xa405013e +# define SCSPTR4 0xa4050128 +# define SCSPTR5 0xa4050128 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) +# define SCIF_BASE_ADDR 0x01030000 +# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR +# define SCIF_PTR2_OFFS 0x0000020 +# define SCIF_LSR2_OFFS 0x0000024 +# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ +# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_H8S2678) +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) +# define SCSPTR0 0xfe4b0020 +# define SCSPTR1 0xfe4b0020 +# define SCSPTR2 0xfe4b0020 +# define SCIF_ORER 0x0001 +# define SCSCR_INIT(port) 0x38 +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ +# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ +# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7770) +# define SCSPTR0 0xff923020 /* 16 bit SCIF */ +# define SCSPTR1 0xff924020 /* 16 bit SCIF */ +# define SCSPTR2 0xff925020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ +# define SCSPTR1 0xffe10024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ + +#if defined(CONFIG_SH_SH2007) +/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ +# define SCSCR_INIT(port) 0x38 +#else +/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ +# define SCSCR_INIT(port) 0x3a +#endif + +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ +# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ +# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ +# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ +# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ +# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ + defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) +# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ +# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ +# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ +# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ +# if defined(CONFIG_CPU_SUBTYPE_SH7201) +# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */ +# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */ +# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ +# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ +# endif +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7619) +# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ +# define SCSPTR1 0xf8410020 /* 16 bit SCIF */ +# define SCSPTR2 0xf8420020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ +# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ +# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ +# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#else +# error CPU subtype not defined +#endif + +/* SCSCR */ +#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ +#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ +#define SCI_CTRL_FLAGS_TE 0x20 /* all */ +#define SCI_CTRL_FLAGS_RE 0x10 /* all */ +#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) +#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) +#else +#define SCI_CTRL_FLAGS_REIE 0 +#endif +/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ +/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ + +/* SCxSR SCI */ +#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ + +#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCIF_ORER 0x0200 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +/* SH7763 SCIF2 support */ +# define SCIF2_RFDC_MASK 0x001f +# define SCIF2_TXROOM_MAX 16 +#else +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +# define SCIF_RFDC_MASK 0x001f +# define SCIF_TXROOM_MAX 16 +#endif + +#ifndef SCIF_ORER +#define SCIF_ORER 0x0000 +#endif + +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) +#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) +#else +# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) +# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) +# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) +# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) +#endif + +/* SCFCR */ +#define SCFCR_RFRST 0x0002 +#define SCFCR_TFRST 0x0004 +#define SCFCR_TCRST 0x4000 +#define SCFCR_MCE 0x0008 + +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + +/* Generic serial flags */ +#define SCI_RX_THROTTLE 0x0000001 + +#define SCI_MAGIC 0xbabeface + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define SCI_EVENT_WRITE_WAKEUP 0 + +#define SCI_IN(size, offset) \ + if ((size) == 8) { \ + return ioread8(port->membase + (offset)); \ + } else { \ + return ioread16(port->membase + (offset)); \ + } +#define SCI_OUT(size, offset, value) \ + if ((size) == 8) { \ + iowrite8(value, port->membase + (offset)); \ + } else if ((size) == 16) { \ + iowrite16(value, port->membase + (offset)); \ + } + +#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ + } \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ + } \ + } + +#ifdef CONFIG_H8300 +/* h8300 don't have SCIF */ +#define CPU_SCIF_FNS(name) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + return 0; \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + } +#else +#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + SCI_IN(scif_size, scif_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + SCI_OUT(scif_size, scif_offset, value); \ + } +#endif + +#define CPU_SCI_FNS(name, sci_offset, sci_size) \ + static inline unsigned int sci_##name##_in(struct uart_port* port) \ + { \ + SCI_IN(sci_size, sci_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ + { \ + SCI_OUT(sci_size, sci_offset, value); \ + } + +#if defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) +#define SCIF_FNS(name, scif_offset, scif_size) \ + CPU_SCIF_FNS(name, scif_offset, scif_size) +#elif defined(CONFIG_ARCH_SH7372) +#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ + CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) +#define SCIF_FNS(name, scif_offset, scif_size) \ + CPU_SCIF_FNS(name, scif_offset, scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) +#endif +#elif defined(__H8300H__) || defined(__H8300S__) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) + #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) + #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) + +SCIF_FNS(SCSMR, 0x00, 16) +SCIF_FNS(SCBRR, 0x04, 8) +SCIF_FNS(SCSCR, 0x08, 16) +SCIF_FNS(SCTDSR, 0x0c, 8) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCxSR, 0x14, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCxTDR, 0x20, 8) +SCIF_FNS(SCxRDR, 0x24, 8) +SCIF_FNS(SCLSR, 0x00, 0) +#elif defined(CONFIG_ARCH_SH7372) +SCIF_FNS(SCSMR, 0x00, 16) +SCIF_FNS(SCBRR, 0x04, 8) +SCIF_FNS(SCSCR, 0x08, 16) +SCIF_FNS(SCTDSR, 0x0c, 16) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCxSR, 0x14, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCTFDR, 0x38, 16) +SCIF_FNS(SCRFDR, 0x3c, 16) +SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) +SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) +SCIF_FNS(SCLSR, 0x00, 0) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) +SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) +SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) +SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) +SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) +SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) +SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) +SCIx_FNS(SCSPTR, 0, 0, 0, 0) +SCIF_FNS(SCTDSR, 0x0c, 8) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCLSR, 0x24, 16) +#else +/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ +/* name off sz off sz off sz off sz off sz*/ +SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) +SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) +SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) +SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) +SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) +SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) +SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) +SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#else +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7722) +SCIF_FNS(SCSPTR, 0, 0, 0, 0) +#else +SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) +#endif +SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#endif +#endif +#define sci_in(port, reg) sci_##reg##_in(port) +#define sci_out(port, reg, value) sci_##reg##_out(port, value) + +/* H8/300 series SCI pins assignment */ +#if defined(__H8300H__) || defined(__H8300S__) +static const struct __attribute__((packed)) { + int port; /* GPIO port no */ + unsigned short rx,tx; /* GPIO bit no */ +} h8300_sci_pins[] = { +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) + { /* SCI0 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_PB, + .rx = H8300_GPIO_B7, + .tx = H8300_GPIO_B6, + } +#elif defined(CONFIG_H8S2678) + { /* SCI0 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_P5, + .rx = H8300_GPIO_B1, + .tx = H8300_GPIO_B0, + } +#endif +}; +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7708) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfffffe80) + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return 1; +} +#elif defined(__H8300H__) || defined(__H8300S__) +static inline int sci_rxd_in(struct uart_port *port) +{ + int ch = (port->mapbase - SMR0) >> 3; + return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; +} +#else /* default case for non-SCI processors */ +static inline int sci_rxd_in(struct uart_port *port) +{ + return 1; +} +#endif + +/* + * Values for the BitRate Register (SCBRR) + * + * The values are actually divisors for a frequency which can + * be internal to the SH3 (14.7456MHz) or derived from an external + * clock source. This driver assumes the internal clock is used; + * to support using an external clock source, config options or + * possibly command-line options would need to be added. + * + * Also, to support speeds below 2400 (why?) the lower 2 bits of + * the SCSMR register would also need to be set to non-zero values. + * + * -- Greg Banks 27Feb2000 + * + * Answer: The SCBRR register is only eight bits, and the value in + * it gets larger with lower baud rates. At around 2400 (depending on + * the peripherial module clock) you run out of bits. However the + * lower two bits of SCSMR allow the module clock to be divided down, + * scaling the value which is needed in SCBRR. + * + * -- Stuart Menefy - 23 May 2000 + * + * I meant, why would anyone bother with bitrates below 2400. + * + * -- Greg Banks - 7Jul2000 + * + * You "speedist"! How will I use my 110bps ASR-33 teletype with paper + * tape reader as a console! + * + * -- Mitch Davis - 15 Jul 2000 + */ + +#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ + !defined(CONFIG_SH_SH2007) +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) +static inline int scbrr_calc(struct uart_port *port, int bps, int clk) +{ + if (port->type == PORT_SCIF) + return (clk+16*bps)/(32*bps)-1; + else + return ((clk*2)+16*bps)/(16*bps)-1; +} +#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) +#elif defined(__H8300H__) || defined(__H8300S__) +#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) +#else /* Generic SH */ +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +#endif diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c new file mode 100644 index 0000000..cff9a30 --- /dev/null +++ b/drivers/tty/serial/sn_console.c @@ -0,0 +1,1085 @@ +/* + * C-Brick Serial Port (and console) driver for SGI Altix machines. + * + * This driver is NOT suitable for talking to the l1-controller for + * anything other than 'console activities' --- please use the l1 + * driver for that. + * + * + * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane, + * Mountain View, CA 94043, or: + * + * http://www.sgi.com + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for mdelay */ +#include +#include + +#include +#include +#include + +/* number of characters we can transmit to the SAL console at a time */ +#define SN_SAL_MAX_CHARS 120 + +/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to + * avoid losing chars, (always has to be a power of 2) */ +#define SN_SAL_BUFFER_SIZE (64 * (1 << 10)) + +#define SN_SAL_UART_FIFO_DEPTH 16 +#define SN_SAL_UART_FIFO_SPEED_CPS (9600/10) + +/* sn_transmit_chars() calling args */ +#define TRANSMIT_BUFFERED 0 +#define TRANSMIT_RAW 1 + +/* To use dynamic numbers only and not use the assigned major and minor, + * define the following.. */ + /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */ +#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */ + +/* Device name we're using */ +#define DEVICE_NAME "ttySG" +#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */ +/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */ +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 40 + +#ifdef CONFIG_MAGIC_SYSRQ +static char sysrq_serial_str[] = "\eSYS"; +static char *sysrq_serial_ptr = sysrq_serial_str; +static unsigned long sysrq_requested; +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * Port definition - this kinda drives it all + */ +struct sn_cons_port { + struct timer_list sc_timer; + struct uart_port sc_port; + struct sn_sal_ops { + int (*sal_puts_raw) (const char *s, int len); + int (*sal_puts) (const char *s, int len); + int (*sal_getc) (void); + int (*sal_input_pending) (void); + void (*sal_wakeup_transmit) (struct sn_cons_port *, int); + } *sc_ops; + unsigned long sc_interrupt_timeout; + int sc_is_asynch; +}; + +static struct sn_cons_port sal_console_port; +static int sn_process_input; + +/* Only used if USE_DYNAMIC_MINOR is set to 1 */ +static struct miscdevice misc; /* used with misc_register for dynamic */ + +extern void early_sn_setup(void); + +#undef DEBUG +#ifdef DEBUG +static int sn_debug_printf(const char *fmt, ...); +#define DPRINTF(x...) sn_debug_printf(x) +#else +#define DPRINTF(x...) do { } while (0) +#endif + +/* Prototypes */ +static int snt_hw_puts_raw(const char *, int); +static int snt_hw_puts_buffered(const char *, int); +static int snt_poll_getc(void); +static int snt_poll_input_pending(void); +static int snt_intr_getc(void); +static int snt_intr_input_pending(void); +static void sn_transmit_chars(struct sn_cons_port *, int); + +/* A table for polling: + */ +static struct sn_sal_ops poll_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_raw, + .sal_getc = snt_poll_getc, + .sal_input_pending = snt_poll_input_pending +}; + +/* A table for interrupts enabled */ +static struct sn_sal_ops intr_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_buffered, + .sal_getc = snt_intr_getc, + .sal_input_pending = snt_intr_input_pending, + .sal_wakeup_transmit = sn_transmit_chars +}; + +/* the console does output in two distinctly different ways: + * synchronous (raw) and asynchronous (buffered). initally, early_printk + * does synchronous output. any data written goes directly to the SAL + * to be output (incidentally, it is internally buffered by the SAL) + * after interrupts and timers are initialized and available for use, + * the console init code switches to asynchronous output. this is + * also the earliest opportunity to begin polling for console input. + * after console initialization, console output and tty (serial port) + * output is buffered and sent to the SAL asynchronously (either by + * timer callback or by UART interrupt) */ + +/* routines for running the console in polling mode */ + +/** + * snt_poll_getc - Get a character from the console in polling mode + * + */ +static int snt_poll_getc(void) +{ + int ch; + + ia64_sn_console_getc(&ch); + return ch; +} + +/** + * snt_poll_input_pending - Check if any input is waiting - polling mode. + * + */ +static int snt_poll_input_pending(void) +{ + int status, input; + + status = ia64_sn_console_check(&input); + return !status && input; +} + +/* routines for an interrupt driven console (normal) */ + +/** + * snt_intr_getc - Get a character from the console, interrupt mode + * + */ +static int snt_intr_getc(void) +{ + return ia64_sn_console_readc(); +} + +/** + * snt_intr_input_pending - Check if input is pending, interrupt mode + * + */ +static int snt_intr_input_pending(void) +{ + return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV; +} + +/* these functions are polled and interrupt */ + +/** + * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_raw(const char *s, int len) +{ + /* this will call the PROM and not return until this is done */ + return ia64_sn_console_putb(s, len); +} + +/** + * snt_hw_puts_buffered - Send string to console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_buffered(const char *s, int len) +{ + /* queue data to the PROM */ + return ia64_sn_console_xmit_chars((char *)s, len); +} + +/* uart interface structs + * These functions are associated with the uart_port that the serial core + * infrastructure calls. + * + * Note: Due to how the console works, many routines are no-ops. + */ + +/** + * snp_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *snp_type(struct uart_port *port) +{ + return ("SGI SN L1"); +} + +/** + * snp_tx_empty - Is the transmitter empty? We pretend we're always empty + * @port: Port to operate on (we ignore since we only have one port) + * + */ +static unsigned int snp_tx_empty(struct uart_port *port) +{ + return 1; +} + +/** + * snp_stop_tx - stop the transmitter - no-op for us + * @port: Port to operat eon - we ignore - no-op function + * + */ +static void snp_stop_tx(struct uart_port *port) +{ +} + +/** + * snp_release_port - Free i/o and resources for port - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_release_port(struct uart_port *port) +{ +} + +/** + * snp_enable_ms - Force modem status interrupts on - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_enable_ms(struct uart_port *port) +{ +} + +/** + * snp_shutdown - shut down the port - free irq and disable - no-op for us + * @port: Port to shut down - we ignore + * + */ +static void snp_shutdown(struct uart_port *port) +{ +} + +/** + * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console + * @port: Port to operate on - we ignore + * @mctrl: Lines to set/unset - we ignore + * + */ +static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * snp_get_mctrl - get contorl line info, we just return a static value + * @port: port to operate on - we only have one port so we ignore this + * + */ +static unsigned int snp_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS; +} + +/** + * snp_stop_rx - Stop the receiver - we ignor ethis + * @port: Port to operate on - we ignore + * + */ +static void snp_stop_rx(struct uart_port *port) +{ +} + +/** + * snp_start_tx - Start transmitter + * @port: Port to operate on + * + */ +static void snp_start_tx(struct uart_port *port) +{ + if (sal_console_port.sc_ops->sal_wakeup_transmit) + sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port, + TRANSMIT_BUFFERED); + +} + +/** + * snp_break_ctl - handle breaks - ignored by us + * @port: Port to operate on + * @break_state: Break state + * + */ +static void snp_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * snp_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int snp_startup(struct uart_port *port) +{ + return 0; +} + +/** + * snp_set_termios - set termios stuff - we ignore these + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +snp_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +} + +/** + * snp_request_port - allocate resources for port - ignored by us + * @port: port to operate on + * + */ +static int snp_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * snp_config_port - allocate resources, set up - we ignore, we're always on + * @port: Port to operate on + * @flags: flags used for port setup + * + */ +static void snp_config_port(struct uart_port *port, int flags) +{ +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops sn_console_ops = { + .tx_empty = snp_tx_empty, + .set_mctrl = snp_set_mctrl, + .get_mctrl = snp_get_mctrl, + .stop_tx = snp_stop_tx, + .start_tx = snp_start_tx, + .stop_rx = snp_stop_rx, + .enable_ms = snp_enable_ms, + .break_ctl = snp_break_ctl, + .startup = snp_startup, + .shutdown = snp_shutdown, + .set_termios = snp_set_termios, + .pm = NULL, + .type = snp_type, + .release_port = snp_release_port, + .request_port = snp_request_port, + .config_port = snp_config_port, + .verify_port = NULL, +}; + +/* End of uart struct functions and defines */ + +#ifdef DEBUG + +/** + * sn_debug_printf - close to hardware debugging printf + * @fmt: printf format + * + * This is as "close to the metal" as we can get, used when the driver + * itself may be broken. + * + */ +static int sn_debug_printf(const char *fmt, ...) +{ + static char printk_buf[1024]; + int printed_len; + va_list args; + + va_start(args, fmt); + printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args); + + if (!sal_console_port.sc_ops) { + sal_console_port.sc_ops = &poll_ops; + early_sn_setup(); + } + sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len); + + va_end(args); + return printed_len; +} +#endif /* DEBUG */ + +/* + * Interrupt handling routines. + */ + +/** + * sn_receive_chars - Grab characters, pass them to tty layer + * @port: Port to operate on + * @flags: irq flags + * + * Note: If we're not registered with the serial core infrastructure yet, + * we don't try to send characters to it... + * + */ +static void +sn_receive_chars(struct sn_cons_port *port, unsigned long flags) +{ + int ch; + struct tty_struct *tty; + + if (!port) { + printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); + return; + } + + if (!port->sc_ops) { + printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); + return; + } + + if (port->sc_port.state) { + /* The serial_core stuffs are initialized, use them */ + tty = port->sc_port.state->port.tty; + } + else { + /* Not registered yet - can't pass to tty layer. */ + tty = NULL; + } + + while (port->sc_ops->sal_input_pending()) { + ch = port->sc_ops->sal_getc(); + if (ch < 0) { + printk(KERN_ERR "sn_console: An error occured while " + "obtaining data from the console (0x%0x)\n", ch); + break; + } +#ifdef CONFIG_MAGIC_SYSRQ + if (sysrq_requested) { + unsigned long sysrq_timeout = sysrq_requested + HZ*5; + + sysrq_requested = 0; + if (ch && time_before(jiffies, sysrq_timeout)) { + spin_unlock_irqrestore(&port->sc_port.lock, flags); + handle_sysrq(ch); + spin_lock_irqsave(&port->sc_port.lock, flags); + /* ignore actual sysrq command char */ + continue; + } + } + if (ch == *sysrq_serial_ptr) { + if (!(*++sysrq_serial_ptr)) { + sysrq_requested = jiffies; + sysrq_serial_ptr = sysrq_serial_str; + } + /* + * ignore the whole sysrq string except for the + * leading escape + */ + if (ch != '\e') + continue; + } + else + sysrq_serial_ptr = sysrq_serial_str; +#endif /* CONFIG_MAGIC_SYSRQ */ + + /* record the character to pass up to the tty layer */ + if (tty) { + if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) + break; + } + port->sc_port.icount.rx++; + } + + if (tty) + tty_flip_buffer_push(tty); +} + +/** + * sn_transmit_chars - grab characters from serial core, send off + * @port: Port to operate on + * @raw: Transmit raw or buffered + * + * Note: If we're early, before we're registered with serial core, the + * writes are going through sn_sal_console_write because that's how + * register_console has been set up. We currently could have asynch + * polls calling this function due to sn_sal_switch_to_asynch but we can + * ignore them until we register with the serial core stuffs. + * + */ +static void sn_transmit_chars(struct sn_cons_port *port, int raw) +{ + int xmit_count, tail, head, loops, ii; + int result; + char *start; + struct circ_buf *xmit; + + if (!port) + return; + + BUG_ON(!port->sc_is_asynch); + + if (port->sc_port.state) { + /* We're initialized, using serial core infrastructure */ + xmit = &port->sc_port.state->xmit; + } else { + /* Probably sn_sal_switch_to_asynch has been run but serial core isn't + * initialized yet. Just return. Writes are going through + * sn_sal_console_write (due to register_console) at this time. + */ + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) { + /* Nothing to do. */ + ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT); + return; + } + + head = xmit->head; + tail = xmit->tail; + start = &xmit->buf[tail]; + + /* twice around gets the tail to the end of the buffer and + * then to the head, if needed */ + loops = (head < tail) ? 2 : 1; + + for (ii = 0; ii < loops; ii++) { + xmit_count = (head < tail) ? + (UART_XMIT_SIZE - tail) : (head - tail); + + if (xmit_count > 0) { + if (raw == TRANSMIT_RAW) + result = + port->sc_ops->sal_puts_raw(start, + xmit_count); + else + result = + port->sc_ops->sal_puts(start, xmit_count); +#ifdef DEBUG + if (!result) + DPRINTF("`"); +#endif + if (result > 0) { + xmit_count -= result; + port->sc_port.icount.tx += result; + tail += result; + tail &= UART_XMIT_SIZE - 1; + xmit->tail = tail; + start = &xmit->buf[tail]; + } + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&port->sc_port); + + if (uart_circ_empty(xmit)) + snp_stop_tx(&port->sc_port); /* no-op for us */ +} + +/** + * sn_sal_interrupt - Handle console interrupts + * @irq: irq #, useful for debug statements + * @dev_id: our pointer to our port (sn_cons_port which contains the uart port) + * + */ +static irqreturn_t sn_sal_interrupt(int irq, void *dev_id) +{ + struct sn_cons_port *port = (struct sn_cons_port *)dev_id; + unsigned long flags; + int status = ia64_sn_console_intr_status(); + + if (!port) + return IRQ_NONE; + + spin_lock_irqsave(&port->sc_port.lock, flags); + if (status & SAL_CONSOLE_INTR_RECV) { + sn_receive_chars(port, flags); + } + if (status & SAL_CONSOLE_INTR_XMIT) { + sn_transmit_chars(port, TRANSMIT_BUFFERED); + } + spin_unlock_irqrestore(&port->sc_port.lock, flags); + return IRQ_HANDLED; +} + +/** + * sn_sal_timer_poll - this function handles polled console mode + * @data: A pointer to our sn_cons_port (which contains the uart port) + * + * data is the pointer that init_timer will store for us. This function is + * associated with init_timer to see if there is any console traffic. + * Obviously not used in interrupt mode + * + */ +static void sn_sal_timer_poll(unsigned long data) +{ + struct sn_cons_port *port = (struct sn_cons_port *)data; + unsigned long flags; + + if (!port) + return; + + if (!port->sc_port.irq) { + spin_lock_irqsave(&port->sc_port.lock, flags); + if (sn_process_input) + sn_receive_chars(port, flags); + sn_transmit_chars(port, TRANSMIT_RAW); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + mod_timer(&port->sc_timer, + jiffies + port->sc_interrupt_timeout); + } +} + +/* + * Boot-time initialization code + */ + +/** + * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch) + * @port: Our sn_cons_port (which contains the uart port) + * + * So this is used by sn_sal_serial_console_init (early on, before we're + * registered with serial core). It's also used by sn_sal_module_init + * right after we've registered with serial core. The later only happens + * if we didn't already come through here via sn_sal_serial_console_init. + * + */ +static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port) +{ + unsigned long flags; + + if (!port) + return; + + DPRINTF("sn_console: about to switch to asynchronous console\n"); + + /* without early_printk, we may be invoked late enough to race + * with other cpus doing console IO at this point, however + * console interrupts will never be enabled */ + spin_lock_irqsave(&port->sc_port.lock, flags); + + /* early_printk invocation may have done this for us */ + if (!port->sc_ops) + port->sc_ops = &poll_ops; + + /* we can't turn on the console interrupt (as request_irq + * calls kmalloc, which isn't set up yet), so we rely on a + * timer to poll for input and push data from the console + * buffer. + */ + init_timer(&port->sc_timer); + port->sc_timer.function = sn_sal_timer_poll; + port->sc_timer.data = (unsigned long)port; + + if (IS_RUNNING_ON_SIMULATOR()) + port->sc_interrupt_timeout = 6; + else { + /* 960cps / 16 char FIFO = 60HZ + * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */ + port->sc_interrupt_timeout = + HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; + } + mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout); + + port->sc_is_asynch = 1; + spin_unlock_irqrestore(&port->sc_port.lock, flags); +} + +/** + * sn_sal_switch_to_interrupts - Switch to interrupt driven mode + * @port: Our sn_cons_port (which contains the uart port) + * + * In sn_sal_module_init, after we're registered with serial core and + * the port is added, this function is called to switch us to interrupt + * mode. We were previously in asynch/polling mode (using init_timer). + * + * We attempt to switch to interrupt mode here by calling + * request_irq. If that works out, we enable receive interrupts. + */ +static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) +{ + unsigned long flags; + + if (port) { + DPRINTF("sn_console: switching to interrupt driven console\n"); + + if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, + IRQF_DISABLED | IRQF_SHARED, + "SAL console driver", port) >= 0) { + spin_lock_irqsave(&port->sc_port.lock, flags); + port->sc_port.irq = SGI_UART_VECTOR; + port->sc_ops = &intr_ops; + + /* turn on receive interrupts */ + ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + } + else { + printk(KERN_INFO + "sn_console: console proceeding in polled mode\n"); + } + } +} + +/* + * Kernel console definitions + */ + +static void sn_sal_console_write(struct console *, const char *, unsigned); +static int sn_sal_console_setup(struct console *, char *); +static struct uart_driver sal_console_uart; +extern struct tty_driver *uart_console_device(struct console *, int *); + +static struct console sal_console = { + .name = DEVICE_NAME, + .write = sn_sal_console_write, + .device = uart_console_device, + .setup = sn_sal_console_setup, + .index = -1, /* unspecified */ + .data = &sal_console_uart, +}; + +#define SAL_CONSOLE &sal_console + +static struct uart_driver sal_console_uart = { + .owner = THIS_MODULE, + .driver_name = "sn_console", + .dev_name = DEVICE_NAME, + .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */ + .minor = 0, + .nr = 1, /* one port */ + .cons = SAL_CONSOLE, +}; + +/** + * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core + * + * Before this is called, we've been printing kernel messages in a special + * early mode not making use of the serial core infrastructure. When our + * driver is loaded for real, we register the driver and port with serial + * core and try to enable interrupt driven mode. + * + */ +static int __init sn_sal_module_init(void) +{ + int retval; + + if (!ia64_platform_is("sn2")) + return 0; + + printk(KERN_INFO "sn_console: Console driver init\n"); + + if (USE_DYNAMIC_MINOR == 1) { + misc.minor = MISC_DYNAMIC_MINOR; + misc.name = DEVICE_NAME_DYNAMIC; + retval = misc_register(&misc); + if (retval != 0) { + printk(KERN_WARNING "Failed to register console " + "device using misc_register.\n"); + return -ENODEV; + } + sal_console_uart.major = MISC_MAJOR; + sal_console_uart.minor = misc.minor; + } else { + sal_console_uart.major = DEVICE_MAJOR; + sal_console_uart.minor = DEVICE_MINOR; + } + + /* We register the driver and the port before switching to interrupts + * or async above so the proper uart structures are populated */ + + if (uart_register_driver(&sal_console_uart) < 0) { + printk + ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n", + __LINE__); + return -ENODEV; + } + + spin_lock_init(&sal_console_port.sc_port.lock); + + /* Setup the port struct with the minimum needed */ + sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */ + sal_console_port.sc_port.type = PORT_16550A; + sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS; + sal_console_port.sc_port.ops = &sn_console_ops; + sal_console_port.sc_port.line = 0; + + if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { + /* error - not sure what I'd do - so I'll do nothing */ + printk(KERN_ERR "%s: unable to add port\n", __func__); + } + + /* when this driver is compiled in, the console initialization + * will have already switched us into asynchronous operation + * before we get here through the module initcalls */ + if (!sal_console_port.sc_is_asynch) { + sn_sal_switch_to_asynch(&sal_console_port); + } + + /* at this point (module_init) we can try to turn on interrupts */ + if (!IS_RUNNING_ON_SIMULATOR()) { + sn_sal_switch_to_interrupts(&sal_console_port); + } + sn_process_input = 1; + return 0; +} + +/** + * sn_sal_module_exit - When we're unloaded, remove the driver/port + * + */ +static void __exit sn_sal_module_exit(void) +{ + del_timer_sync(&sal_console_port.sc_timer); + uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port); + uart_unregister_driver(&sal_console_uart); + misc_deregister(&misc); +} + +module_init(sn_sal_module_init); +module_exit(sn_sal_module_exit); + +/** + * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required + * @puts_raw : puts function to do the writing + * @s: input string + * @count: length + * + * We need a \r ahead of every \n for direct writes through + * ia64_sn_console_putb (what sal_puts_raw below actually does). + * + */ + +static void puts_raw_fixed(int (*puts_raw) (const char *s, int len), + const char *s, int count) +{ + const char *s1; + + /* Output '\r' before each '\n' */ + while ((s1 = memchr(s, '\n', count)) != NULL) { + puts_raw(s, s1 - s); + puts_raw("\r\n", 2); + count -= s1 + 1 - s; + s = s1 + 1; + } + puts_raw(s, count); +} + +/** + * sn_sal_console_write - Print statements before serial core available + * @console: Console to operate on - we ignore since we have just one + * @s: String to send + * @count: length + * + * This is referenced in the console struct. It is used for early + * console printing before we register with serial core and for things + * such as kdb. The console_lock must be held when we get here. + * + * This function has some code for trying to print output even if the lock + * is held. We try to cover the case where a lock holder could have died. + * We don't use this special case code if we're not registered with serial + * core yet. After we're registered with serial core, the only time this + * function would be used is for high level kernel output like magic sys req, + * kdb, and printk's. + */ +static void +sn_sal_console_write(struct console *co, const char *s, unsigned count) +{ + unsigned long flags = 0; + struct sn_cons_port *port = &sal_console_port; + static int stole_lock = 0; + + BUG_ON(!port->sc_is_asynch); + + /* We can't look at the xmit buffer if we're not registered with serial core + * yet. So only do the fancy recovery after registering + */ + if (!port->sc_port.state) { + /* Not yet registered with serial core - simple case */ + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + return; + } + + /* somebody really wants this output, might be an + * oops, kdb, panic, etc. make sure they get it. */ + if (spin_is_locked(&port->sc_port.lock)) { + int lhead = port->sc_port.state->xmit.head; + int ltail = port->sc_port.state->xmit.tail; + int counter, got_lock = 0; + + /* + * We attempt to determine if someone has died with the + * lock. We wait ~20 secs after the head and tail ptrs + * stop moving and assume the lock holder is not functional + * and plow ahead. If the lock is freed within the time out + * period we re-get the lock and go ahead normally. We also + * remember if we have plowed ahead so that we don't have + * to wait out the time out period again - the asumption + * is that we will time out again. + */ + + for (counter = 0; counter < 150; mdelay(125), counter++) { + if (!spin_is_locked(&port->sc_port.lock) + || stole_lock) { + if (!stole_lock) { + spin_lock_irqsave(&port->sc_port.lock, + flags); + got_lock = 1; + } + break; + } else { + /* still locked */ + if ((lhead != port->sc_port.state->xmit.head) + || (ltail != + port->sc_port.state->xmit.tail)) { + lhead = + port->sc_port.state->xmit.head; + ltail = + port->sc_port.state->xmit.tail; + counter = 0; + } + } + } + /* flush anything in the serial core xmit buffer, raw */ + sn_transmit_chars(port, 1); + if (got_lock) { + spin_unlock_irqrestore(&port->sc_port.lock, flags); + stole_lock = 0; + } else { + /* fell thru */ + stole_lock = 1; + } + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } else { + stole_lock = 0; + spin_lock_irqsave(&port->sc_port.lock, flags); + sn_transmit_chars(port, 1); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } +} + + +/** + * sn_sal_console_setup - Set up console for early printing + * @co: Console to work with + * @options: Options to set + * + * Altix console doesn't do anything with baud rates, etc, anyway. + * + * This isn't required since not providing the setup function in the + * console struct is ok. However, other patches like KDB plop something + * here so providing it is easier. + * + */ +static int sn_sal_console_setup(struct console *co, char *options) +{ + return 0; +} + +/** + * sn_sal_console_write_early - simple early output routine + * @co - console struct + * @s - string to print + * @count - count + * + * Simple function to provide early output, before even + * sn_sal_serial_console_init is called. Referenced in the + * console struct registerd in sn_serial_console_early_setup. + * + */ +static void __init +sn_sal_console_write_early(struct console *co, const char *s, unsigned count) +{ + puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count); +} + +/* Used for very early console printing - again, before + * sn_sal_serial_console_init is run */ +static struct console sal_console_early __initdata = { + .name = "sn_sal", + .write = sn_sal_console_write_early, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/** + * sn_serial_console_early_setup - Sets up early console output support + * + * Register a console early on... This is for output before even + * sn_sal_serial_cosnole_init is called. This function is called from + * setup.c. This allows us to do really early polled writes. When + * sn_sal_serial_console_init is called, this console is unregistered + * and a new one registered. + */ +int __init sn_serial_console_early_setup(void) +{ + if (!ia64_platform_is("sn2")) + return -1; + + sal_console_port.sc_ops = &poll_ops; + spin_lock_init(&sal_console_port.sc_port.lock); + early_sn_setup(); /* Find SAL entry points */ + register_console(&sal_console_early); + + return 0; +} + +/** + * sn_sal_serial_console_init - Early console output - set up for register + * + * This function is called when regular console init happens. Because we + * support even earlier console output with sn_serial_console_early_setup + * (called from setup.c directly), this function unregisters the really + * early console. + * + * Note: Even if setup.c doesn't register sal_console_early, unregistering + * it here doesn't hurt anything. + * + */ +static int __init sn_sal_serial_console_init(void) +{ + if (ia64_platform_is("sn2")) { + sn_sal_switch_to_asynch(&sal_console_port); + DPRINTF("sn_sal_serial_console_init : register console\n"); + register_console(&sal_console); + unregister_console(&sal_console_early); + } + return 0; +} + +console_initcall(sn_sal_serial_console_init); diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c new file mode 100644 index 0000000..6381a02 --- /dev/null +++ b/drivers/tty/serial/suncore.c @@ -0,0 +1,247 @@ +/* suncore.c + * + * Common SUN serial routines. Based entirely + * upon drivers/sbus/char/sunserial.c which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adaptation to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "suncore.h" + +static int sunserial_current_minor = 64; + +int sunserial_register_minors(struct uart_driver *drv, int count) +{ + int err = 0; + + drv->minor = sunserial_current_minor; + drv->nr += count; + /* Register the driver on the first call */ + if (drv->nr == count) + err = uart_register_driver(drv); + if (err == 0) { + sunserial_current_minor += count; + drv->tty_driver->name_base = drv->minor - 64; + } + return err; +} +EXPORT_SYMBOL(sunserial_register_minors); + +void sunserial_unregister_minors(struct uart_driver *drv, int count) +{ + drv->nr -= count; + sunserial_current_minor -= count; + + if (drv->nr == 0) + uart_unregister_driver(drv); +} +EXPORT_SYMBOL(sunserial_unregister_minors); + +int sunserial_console_match(struct console *con, struct device_node *dp, + struct uart_driver *drv, int line, bool ignore_line) +{ + if (!con) + return 0; + + drv->cons = con; + + if (of_console_device != dp) + return 0; + + if (!ignore_line) { + int off = 0; + + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } + + if (!console_set_on_cmdline) { + con->index = line; + add_preferred_console(con->name, line, NULL); + } + return 1; +} +EXPORT_SYMBOL(sunserial_console_match); + +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) +{ + const char *mode, *s; + char mode_prop[] = "ttyX-mode"; + int baud, bits, stop, cflag; + char parity; + + if (!strcmp(uart_dp->name, "rsc") || + !strcmp(uart_dp->name, "rsc-console") || + !strcmp(uart_dp->name, "rsc-control")) { + mode = of_get_property(uart_dp, + "ssp-console-modes", NULL); + if (!mode) + mode = "115200,8,n,1,-"; + } else if (!strcmp(uart_dp->name, "lom-console")) { + mode = "9600,8,n,1,-"; + } else { + struct device_node *dp; + char c; + + c = 'a'; + if (of_console_options) + c = *of_console_options; + + mode_prop[3] = c; + + dp = of_find_node_by_path("/options"); + mode = of_get_property(dp, mode_prop, NULL); + if (!mode) + mode = "9600,8,n,1,-"; + } + + cflag = CREAD | HUPCL | CLOCAL; + + s = mode; + baud = simple_strtoul(s, NULL, 0); + s = strchr(s, ','); + bits = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + parity = *(++s); + s = strchr(s, ','); + stop = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + /* XXX handshake is not handled here. */ + + switch (baud) { + case 150: cflag |= B150; break; + case 300: cflag |= B300; break; + case 600: cflag |= B600; break; + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + case 9600: cflag |= B9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + case 57600: cflag |= B57600; break; + case 115200: cflag |= B115200; break; + case 230400: cflag |= B230400; break; + case 460800: cflag |= B460800; break; + default: baud = 9600; cflag |= B9600; break; + } + + switch (bits) { + case 5: cflag |= CS5; break; + case 6: cflag |= CS6; break; + case 7: cflag |= CS7; break; + case 8: cflag |= CS8; break; + default: cflag |= CS8; break; + } + + switch (parity) { + case 'o': cflag |= (PARENB | PARODD); break; + case 'e': cflag |= PARENB; break; + case 'n': default: break; + } + + switch (stop) { + case 2: cflag |= CSTOPB; break; + case 1: default: break; + } + + con->cflag = cflag; +} + +/* Sun serial MOUSE auto baud rate detection. */ +static struct mouse_baud_cflag { + int baud; + unsigned int cflag; +} mouse_baud_table[] = { + { 1200, B1200 }, + { 2400, B2400 }, + { 4800, B4800 }, + { 9600, B9600 }, + { -1, ~0 }, + { -1, ~0 }, +}; + +unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) +{ + int i; + + for (i = 0; mouse_baud_table[i].baud != -1; i++) + if (mouse_baud_table[i].cflag == (cflag & CBAUD)) + break; + + i += 1; + if (mouse_baud_table[i].baud == -1) + i = 0; + + *new_baud = mouse_baud_table[i].baud; + return mouse_baud_table[i].cflag; +} + +EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); + +/* Basically, when the baud rate is wrong the mouse spits out + * breaks to us. + */ +int suncore_mouse_baud_detection(unsigned char ch, int is_break) +{ + static int mouse_got_break = 0; + static int ctr = 0; + + if (is_break) { + /* Let a few normal bytes go by before we jump the gun + * and say we need to try another baud rate. + */ + if (mouse_got_break && ctr < 8) + return 1; + + /* Ok, we need to try another baud. */ + ctr = 0; + mouse_got_break = 1; + return 2; + } + if (mouse_got_break) { + ctr++; + if (ch == 0x87) { + /* Correct baud rate determined. */ + mouse_got_break = 0; + } + return 1; + } + return 0; +} + +EXPORT_SYMBOL(suncore_mouse_baud_detection); + +static int __init suncore_init(void) +{ + return 0; +} + +static void __exit suncore_exit(void) +{ +} + +module_init(suncore_init); +module_exit(suncore_exit); + +MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); +MODULE_DESCRIPTION("Sun serial common layer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/suncore.h b/drivers/tty/serial/suncore.h new file mode 100644 index 0000000..db20579 --- /dev/null +++ b/drivers/tty/serial/suncore.h @@ -0,0 +1,33 @@ +/* suncore.h + * + * Generic SUN serial/kbd/ms layer. Based entirely + * upon drivers/sbus/char/sunserial.h which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Port to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _SERIAL_SUN_H +#define _SERIAL_SUN_H + +/* Serial keyboard defines for L1-A processing... */ +#define SUNKBD_RESET 0xff +#define SUNKBD_L1 0x01 +#define SUNKBD_UP 0x80 +#define SUNKBD_A 0x4d + +extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); +extern int suncore_mouse_baud_detection(unsigned char, int); + +extern int sunserial_register_minors(struct uart_driver *, int); +extern void sunserial_unregister_minors(struct uart_driver *, int); + +extern int sunserial_console_match(struct console *, struct device_node *, + struct uart_driver *, int, bool); +extern void sunserial_console_termios(struct console *, + struct device_node *); + +#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c new file mode 100644 index 0000000..c901486 --- /dev/null +++ b/drivers/tty/serial/sunhv.c @@ -0,0 +1,661 @@ +/* sunhv.c: Serial driver for SUN4V hypervisor console. + * + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" + +#define CON_BREAK ((long)-1) +#define CON_HUP ((long)-2) + +#define IGNORE_BREAK 0x1 +#define IGNORE_ALL 0x2 + +static char *con_write_page; +static char *con_read_page; + +static int hung_up = 0; + +static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + long status = sun4v_con_putchar(xmit->buf[xmit->tail]); + + if (status != HV_EOK) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + unsigned long ra = __pa(xmit->buf + xmit->tail); + unsigned long len, status, sent; + + len = CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE); + status = sun4v_con_write(ra, len, &sent); + if (status != HV_EOK) + break; + xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); + port->icount.tx += sent; + } +} + +static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + long status; + long c = sun4v_con_getchar(&status); + + if (status == HV_EWOULDBLOCK) + break; + + if (c == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + c = 0; + } + + if (c == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + } else if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + if (tty == NULL) { + uart_handle_sysrq_char(port, c); + continue; + } + + port->icount.rx++; + + if (uart_handle_sysrq_char(port, c)) + continue; + + tty_insert_flip_char(tty, c, TTY_NORMAL); + } + + return saw_console_brk; +} + +static int receive_chars_read(struct uart_port *port, struct tty_struct *tty) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + unsigned long ra = __pa(con_read_page); + unsigned long bytes_read, i; + long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); + + if (stat != HV_EOK) { + bytes_read = 0; + + if (stat == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + *con_read_page = 0; + bytes_read = 1; + } else if (stat == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + continue; + } else { + /* HV_EWOULDBLOCK, etc. */ + break; + } + } + + if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + for (i = 0; i < bytes_read; i++) + uart_handle_sysrq_char(port, con_read_page[i]); + + if (tty == NULL) + continue; + + port->icount.rx += bytes_read; + + tty_insert_flip_string(tty, con_read_page, bytes_read); + } + + return saw_console_brk; +} + +struct sunhv_ops { + void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); + int (*receive_chars)(struct uart_port *port, struct tty_struct *tty); +}; + +static struct sunhv_ops bychar_ops = { + .transmit_chars = transmit_chars_putchar, + .receive_chars = receive_chars_getchar, +}; + +static struct sunhv_ops bywrite_ops = { + .transmit_chars = transmit_chars_write, + .receive_chars = receive_chars_read, +}; + +static struct sunhv_ops *sunhv_ops = &bychar_ops; + +static struct tty_struct *receive_chars(struct uart_port *port) +{ + struct tty_struct *tty = NULL; + + if (port->state != NULL) /* Unopened serial console */ + tty = port->state->port.tty; + + if (sunhv_ops->receive_chars(port, tty)) + sun_do_break(); + + return tty; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->state) + return; + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + sunhv_ops->transmit_chars(port, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sunhv_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + tty = receive_chars(port); + transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunhv_tx_empty(struct uart_port *port) +{ + /* Transmitter is always empty for us. If the circ buffer + * is non-empty or there is an x_char pending, our caller + * will do the right thing and ignore what we return here. + */ + return TIOCSER_TEMT; +} + +/* port->lock held by caller. */ +static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + return; +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunhv_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void sunhv_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sunhv_start_tx(struct uart_port *port) +{ + transmit_chars(port); +} + +/* port->lock is not held. */ +static void sunhv_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(ch); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* port->lock held by caller. */ +static void sunhv_stop_rx(struct uart_port *port) +{ +} + +/* port->lock held by caller. */ +static void sunhv_enable_ms(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state) { + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(CON_BREAK); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); + } +} + +/* port->lock is not held. */ +static int sunhv_startup(struct uart_port *port) +{ + return 0; +} + +/* port->lock is not held. */ +static void sunhv_shutdown(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= IGNORE_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= IGNORE_ALL; + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sunhv_type(struct uart_port *port) +{ + return "SUN4V HCONS"; +} + +static void sunhv_release_port(struct uart_port *port) +{ +} + +static int sunhv_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunhv_config_port(struct uart_port *port, int flags) +{ +} + +static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunhv_pops = { + .tx_empty = sunhv_tx_empty, + .set_mctrl = sunhv_set_mctrl, + .get_mctrl = sunhv_get_mctrl, + .stop_tx = sunhv_stop_tx, + .start_tx = sunhv_start_tx, + .send_xchar = sunhv_send_xchar, + .stop_rx = sunhv_stop_rx, + .enable_ms = sunhv_enable_ms, + .break_ctl = sunhv_break_ctl, + .startup = sunhv_startup, + .shutdown = sunhv_shutdown, + .set_termios = sunhv_set_termios, + .type = sunhv_type, + .release_port = sunhv_release_port, + .request_port = sunhv_request_port, + .config_port = sunhv_config_port, + .verify_port = sunhv_verify_port, +}; + +static struct uart_driver sunhv_reg = { + .owner = THIS_MODULE, + .driver_name = "sunhv", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_port *sunhv_port; + +/* Copy 's' into the con_write_page, decoding "\n" into + * "\r\n" along the way. We have to return two lengths + * because the caller needs to know how much to advance + * 's' and also how many bytes to output via con_write_page. + */ +static int fill_con_write_page(const char *s, unsigned int n, + unsigned long *page_bytes) +{ + const char *orig_s = s; + char *p = con_write_page; + int left = PAGE_SIZE; + + while (n--) { + if (*s == '\n') { + if (left < 2) + break; + *p++ = '\r'; + left--; + } else if (left < 1) + break; + *p++ = *s++; + left--; + } + *page_bytes = p - con_write_page; + return s - orig_s; +} + +static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else + spin_lock(&port->lock); + + while (n > 0) { + unsigned long ra = __pa(con_write_page); + unsigned long page_bytes; + unsigned int cpy = fill_con_write_page(s, n, + &page_bytes); + + n -= cpy; + s += cpy; + while (page_bytes > 0) { + unsigned long written; + int limit = 1000000; + + while (limit--) { + unsigned long stat; + + stat = sun4v_con_write(ra, page_bytes, + &written); + if (stat == HV_EOK) + break; + udelay(1); + } + if (limit < 0) + break; + page_bytes -= written; + ra += written; + } + } + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static inline void sunhv_console_putchar(struct uart_port *port, char c) +{ + int limit = 1000000; + + while (limit-- > 0) { + long status = sun4v_con_putchar(c); + if (status == HV_EOK) + break; + udelay(1); + } +} + +static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int i, locked = 1; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else + spin_lock(&port->lock); + + for (i = 0; i < n; i++) { + if (*s == '\n') + sunhv_console_putchar(port, '\r'); + sunhv_console_putchar(port, *s++); + } + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static struct console sunhv_console = { + .name = "ttyHV", + .write = sunhv_console_write_bychar, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunhv_reg, +}; + +static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match) +{ + struct uart_port *port; + unsigned long minor; + int err; + + if (op->archdata.irqs[0] == 0xffffffff) + return -ENODEV; + + port = kzalloc(sizeof(struct uart_port), GFP_KERNEL); + if (unlikely(!port)) + return -ENOMEM; + + minor = 1; + if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && + minor >= 1) { + err = -ENOMEM; + con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_write_page) + goto out_free_port; + + con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_read_page) + goto out_free_con_write_page; + + sunhv_console.write = sunhv_console_write_paged; + sunhv_ops = &bywrite_ops; + } + + sunhv_port = port; + + port->line = 0; + port->ops = &sunhv_pops; + port->type = PORT_SUNHV; + port->uartclk = ( 29491200 / 16 ); /* arbitrary */ + + port->membase = (unsigned char __iomem *) __pa(port); + + port->irq = op->archdata.irqs[0]; + + port->dev = &op->dev; + + err = sunserial_register_minors(&sunhv_reg, 1); + if (err) + goto out_free_con_read_page; + + sunserial_console_match(&sunhv_console, op->dev.of_node, + &sunhv_reg, port->line, false); + + err = uart_add_one_port(&sunhv_reg, port); + if (err) + goto out_unregister_driver; + + err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port); + if (err) + goto out_remove_port; + + dev_set_drvdata(&op->dev, port); + + return 0; + +out_remove_port: + uart_remove_one_port(&sunhv_reg, port); + +out_unregister_driver: + sunserial_unregister_minors(&sunhv_reg, 1); + +out_free_con_read_page: + kfree(con_read_page); + +out_free_con_write_page: + kfree(con_write_page); + +out_free_port: + kfree(port); + sunhv_port = NULL; + return err; +} + +static int __devexit hv_remove(struct platform_device *dev) +{ + struct uart_port *port = dev_get_drvdata(&dev->dev); + + free_irq(port->irq, port); + + uart_remove_one_port(&sunhv_reg, port); + + sunserial_unregister_minors(&sunhv_reg, 1); + + kfree(port); + sunhv_port = NULL; + + dev_set_drvdata(&dev->dev, NULL); + + return 0; +} + +static const struct of_device_id hv_match[] = { + { + .name = "console", + .compatible = "qcn", + }, + { + .name = "console", + .compatible = "SUNW,sun4v-console", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, hv_match); + +static struct of_platform_driver hv_driver = { + .driver = { + .name = "hv", + .owner = THIS_MODULE, + .of_match_table = hv_match, + }, + .probe = hv_probe, + .remove = __devexit_p(hv_remove), +}; + +static int __init sunhv_init(void) +{ + if (tlb_type != hypervisor) + return -ENODEV; + + return of_register_platform_driver(&hv_driver); +} + +static void __exit sunhv_exit(void) +{ + of_unregister_platform_driver(&hv_driver); +} + +module_init(sunhv_init); +module_exit(sunhv_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("SUN4V Hypervisor console driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c new file mode 100644 index 0000000..5b246b1 --- /dev/null +++ b/drivers/tty/serial/sunsab.c @@ -0,0 +1,1152 @@ +/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) + * + * Rewrote buffer handling to use CIRC(Circular Buffer) macros. + * Maxim Krasnyanskiy + * + * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud + * rates to be programmed into the UART. Also eliminated a lot of + * duplicated code in the console setup. + * Theodore Ts'o , 2001-Oct-12 + * + * Ported to new 2.5.x UART layer. + * David S. Miller + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunsab.h" + +struct uart_sunsab_port { + struct uart_port port; /* Generic UART port */ + union sab82532_async_regs __iomem *regs; /* Chip registers */ + unsigned long irqflags; /* IRQ state flags */ + int dsr; /* Current DSR state */ + unsigned int cec_timeout; /* Chip poll timeout... */ + unsigned int tec_timeout; /* likewise */ + unsigned char interrupt_mask0;/* ISR0 masking */ + unsigned char interrupt_mask1;/* ISR1 masking */ + unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ + unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ + unsigned int gis_shift; + int type; /* SAB82532 version */ + + /* Setting configuration bits while the transmitter is active + * can cause garbage characters to get emitted by the chip. + * Therefore, we cache such writes here and do the real register + * write the next time the transmitter becomes idle. + */ + unsigned int cached_ebrg; + unsigned char cached_mode; + unsigned char cached_pvr; + unsigned char cached_dafo; +}; + +/* + * This assumes you have a 29.4912 MHz clock for your UART. + */ +#define SAB_BASE_BAUD ( 29491200 / 16 ) + +static char *sab82532_version[16] = { + "V1.0", "V2.0", "V3.2", "V(0x03)", + "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", + "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", + "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" +}; + +#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ +#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ + +#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ +#define SAB82532_XMIT_FIFO_SIZE 32 + +static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->tec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) + udelay(1); +} + +static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->cec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) + udelay(1); +} + +static struct tty_struct * +receive_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct tty_struct *tty = NULL; + unsigned char buf[32]; + int saw_console_brk = 0; + int free_fifo = 0; + int count = 0; + int i; + + if (up->port.state != NULL) /* Unopened serial console */ + tty = up->port.state->port.tty; + + /* Read number of BYTES (Character + Status) available. */ + if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { + count = SAB82532_RECV_FIFO_SIZE; + free_fifo++; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { + count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); + free_fifo++; + } + + /* Issue a FIFO read command in case we where idle. */ + if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); + return tty; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + free_fifo++; + + /* Read the FIFO. */ + for (i = 0; i < count; i++) + buf[i] = readb(&up->regs->r.rfifo[i]); + + /* Issue Receive Message Complete command. */ + if (free_fifo) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); + } + + /* Count may be zero for BRK, so we check for it here */ + if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && + (up->port.line == up->port.cons->index)) + saw_console_brk = 1; + + for (i = 0; i < count; i++) { + unsigned char ch = buf[i], flag; + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch); + continue; + } + + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR | + SAB82532_ISR0_RFO)) || + unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { + /* + * For statistics only + */ + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + continue; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + up->port.icount.parity++; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + up->port.icount.frame++; + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); + stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); + + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + flag = TTY_BREAK; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + flag = TTY_PARITY; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && + (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) + tty_insert_flip_char(tty, ch, flag); + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void sunsab_stop_tx(struct uart_port *); +static void sunsab_tx_idle(struct uart_sunsab_port *); + +static void transmit_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { + up->interrupt_mask1 |= SAB82532_IMR1_ALLS; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + } + +#if 0 /* bde@nwlink.com says this check causes problems */ + if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) + return; +#endif + + if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) + return; + + set_bit(SAB82532_XPR, &up->irqflags); + sunsab_tx_idle(up); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + return; + } + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + clear_bit(SAB82532_ALLS, &up->irqflags); + + /* Stuff 32 bytes into Transmit FIFO. */ + clear_bit(SAB82532_XPR, &up->irqflags); + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + sunsab_stop_tx(&up->port); +} + +static void check_status(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) + uart_handle_dcd_change(&up->port, + !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); + + if (stat->sreg.isr1 & SAB82532_ISR1_CSC) + uart_handle_cts_change(&up->port, + (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); + + if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { + up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; + up->port.icount.dsr++; + } + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsab_interrupt(int irq, void *dev_id) +{ + struct uart_sunsab_port *up = dev_id; + struct tty_struct *tty; + union sab82532_irq_status status; + unsigned long flags; + unsigned char gis; + + spin_lock_irqsave(&up->port.lock, flags); + + status.stat = 0; + gis = readb(&up->regs->r.gis) >> up->gis_shift; + if (gis & 1) + status.sreg.isr0 = readb(&up->regs->r.isr0); + if (gis & 2) + status.sreg.isr1 = readb(&up->regs->r.isr1); + + tty = NULL; + if (status.stat) { + if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || + (status.sreg.isr1 & SAB82532_ISR1_BRK)) + tty = receive_chars(up, &status); + if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || + (status.sreg.isr1 & SAB82532_ISR1_CSC)) + check_status(up, &status); + if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) + transmit_chars(up, &status); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunsab_tx_empty(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + int ret; + + /* Do not need a lock for a state test like this. */ + if (test_bit(SAB82532_ALLS, &up->irqflags)) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* port->lock held by caller. */ +static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + if (mctrl & TIOCM_RTS) { + up->cached_mode &= ~SAB82532_MODE_FRTS; + up->cached_mode |= SAB82532_MODE_RTS; + } else { + up->cached_mode |= (SAB82532_MODE_FRTS | + SAB82532_MODE_RTS); + } + if (mctrl & TIOCM_DTR) { + up->cached_pvr &= ~(up->pvr_dtr_bit); + } else { + up->cached_pvr |= up->pvr_dtr_bit; + } + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunsab_get_mctrl(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned char val; + unsigned int result; + + result = 0; + + val = readb(&up->regs->r.pvr); + result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; + + val = readb(&up->regs->r.vstr); + result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; + + val = readb(&up->regs->r.star); + result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; + + return result; +} + +/* port->lock held by caller. */ +static void sunsab_stop_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); +} + +/* port->lock held by caller. */ +static void sunsab_tx_idle(struct uart_sunsab_port *up) +{ + if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { + u8 tmp; + + clear_bit(SAB82532_REGS_PENDING, &up->irqflags); + writeb(up->cached_mode, &up->regs->rw.mode); + writeb(up->cached_pvr, &up->regs->rw.pvr); + writeb(up->cached_dafo, &up->regs->w.dafo); + + writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); + tmp = readb(&up->regs->rw.ccr2); + tmp &= ~0xc0; + tmp |= (up->cached_ebrg >> 2) & 0xc0; + writeb(tmp, &up->regs->rw.ccr2); + } +} + +/* port->lock held by caller. */ +static void sunsab_start_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + if (!test_bit(SAB82532_XPR, &up->irqflags)) + return; + + clear_bit(SAB82532_ALLS, &up->irqflags); + clear_bit(SAB82532_XPR, &up->irqflags); + + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); +} + +/* port->lock is not held. */ +static void sunsab_send_xchar(struct uart_port *port, char ch) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + sunsab_tec_wait(up); + writeb(ch, &up->regs->w.tic); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock held by caller. */ +static void sunsab_stop_rx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask0 |= SAB82532_IMR0_TCD; + writeb(up->interrupt_mask1, &up->regs->w.imr0); +} + +/* port->lock held by caller. */ +static void sunsab_enable_ms(struct uart_port *port) +{ + /* For now we always receive these interrupts. */ +} + +/* port->lock is not held. */ +static void sunsab_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&up->port.lock, flags); + + val = up->cached_dafo; + if (break_state) + val |= SAB82532_DAFO_XBRK; + else + val &= ~SAB82532_DAFO_XBRK; + up->cached_dafo = val; + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock is not held. */ +static int sunsab_startup(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char tmp; + int err = request_irq(up->port.irq, sunsab_interrupt, + IRQF_SHARED, "sab", up); + if (err) + return err; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Wait for any commands or immediate characters + */ + sunsab_cec_wait(up); + sunsab_tec_wait(up); + + /* + * Clear the FIFO buffers. + */ + writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); + + /* + * Clear the interrupt registers. + */ + (void) readb(&up->regs->r.isr0); + (void) readb(&up->regs->r.isr1); + + /* + * Now, initialize the UART + */ + writeb(0, &up->regs->w.ccr0); /* power-down */ + writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | + SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); + writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); + writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | + SAB82532_CCR2_TOE, &up->regs->w.ccr2); + writeb(0, &up->regs->w.ccr3); + writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); + up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | + SAB82532_MODE_RAC); + writeb(up->cached_mode, &up->regs->w.mode); + writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); + + tmp = readb(&up->regs->rw.ccr0); + tmp |= SAB82532_CCR0_PU; /* power-up */ + writeb(tmp, &up->regs->rw.ccr0); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA); + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + set_bit(SAB82532_XPR, &up->irqflags); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +/* port->lock is not held. */ +static void sunsab_shutdown(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable Interrupts */ + up->interrupt_mask0 = 0xff; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = 0xff; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + /* Disable break condition */ + up->cached_dafo = readb(&up->regs->rw.dafo); + up->cached_dafo &= ~SAB82532_DAFO_XBRK; + writeb(up->cached_dafo, &up->regs->rw.dafo); + + /* Disable Receiver */ + up->cached_mode &= ~SAB82532_MODE_RAC; + writeb(up->cached_mode, &up->regs->rw.mode); + + /* + * XXX FIXME + * + * If the chip is powered down here the system hangs/crashes during + * reboot or shutdown. This needs to be investigated further, + * similar behaviour occurs in 2.4 when the driver is configured + * as a module only. One hint may be that data is sometimes + * transmitted at 9600 baud during shutdown (regardless of the + * speed the chip was configured for when the port was open). + */ +#if 0 + /* Power Down */ + tmp = readb(&up->regs->rw.ccr0); + tmp &= ~SAB82532_CCR0_PU; + writeb(tmp, &up->regs->rw.ccr0); +#endif + + spin_unlock_irqrestore(&up->port.lock, flags); + free_irq(up->port.irq, up); +} + +/* + * This is used to figure out the divisor speeds. + * + * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), + * + * with 0 <= N < 64 and 0 <= M < 16 + */ + +static void calc_ebrg(int baud, int *n_ret, int *m_ret) +{ + int n, m; + + if (baud == 0) { + *n_ret = 0; + *m_ret = 0; + return; + } + + /* + * We scale numbers by 10 so that we get better accuracy + * without having to use floating point. Here we increment m + * until n is within the valid range. + */ + n = (SAB_BASE_BAUD * 10) / baud; + m = 0; + while (n >= 640) { + n = n / 2; + m++; + } + n = (n+5) / 10; + /* + * We try very hard to avoid speeds with M == 0 since they may + * not work correctly for XTAL frequences above 10 MHz. + */ + if ((m == 0) && ((n & 1) == 0)) { + n = n / 2; + m++; + } + *n_ret = n - 1; + *m_ret = m; +} + +/* Internal routine, port->lock is held and local interrupts are disabled. */ +static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, + unsigned int iflag, unsigned int baud, + unsigned int quot) +{ + unsigned char dafo; + int bits, n, m; + + /* Byte size and parity */ + switch (cflag & CSIZE) { + case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; + case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; + case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + } + + if (cflag & CSTOPB) { + dafo |= SAB82532_DAFO_STOP; + bits++; + } + + if (cflag & PARENB) { + dafo |= SAB82532_DAFO_PARE; + bits++; + } + + if (cflag & PARODD) { + dafo |= SAB82532_DAFO_PAR_ODD; + } else { + dafo |= SAB82532_DAFO_PAR_EVEN; + } + up->cached_dafo = dafo; + + calc_ebrg(baud, &n, &m); + + up->cached_ebrg = n | (m << 6); + + up->tec_timeout = (10 * 1000000) / baud; + up->cec_timeout = up->tec_timeout >> 2; + + /* CTS flow control flags */ + /* We encode read_status_mask and ignore_status_mask like so: + * + * --------------------- + * | ... | ISR1 | ISR0 | + * --------------------- + * .. 15 8 7 0 + */ + + up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | + SAB82532_ISR0_CDSC); + up->port.read_status_mask |= (SAB82532_ISR1_CSC | + SAB82532_ISR1_ALLS | + SAB82532_ISR1_XPR) << 8; + if (iflag & INPCK) + up->port.read_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= SAB82532_ISR0_RFO; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | + SAB82532_ISR0_TCD); + + uart_update_timeout(&up->port, cflag, + (up->port.uartclk / (16 * quot))); + + /* Now schedule a register update when the chip's + * transmitter is idle. + */ + up->cached_mode |= SAB82532_MODE_RAC; + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is not held. */ +static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&up->port.lock, flags); + sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunsab_type(struct uart_port *port) +{ + struct uart_sunsab_port *up = (void *)port; + static char buf[36]; + + sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); + return buf; +} + +static void sunsab_release_port(struct uart_port *port) +{ +} + +static int sunsab_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsab_config_port(struct uart_port *port, int flags) +{ +} + +static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunsab_pops = { + .tx_empty = sunsab_tx_empty, + .set_mctrl = sunsab_set_mctrl, + .get_mctrl = sunsab_get_mctrl, + .stop_tx = sunsab_stop_tx, + .start_tx = sunsab_start_tx, + .send_xchar = sunsab_send_xchar, + .stop_rx = sunsab_stop_rx, + .enable_ms = sunsab_enable_ms, + .break_ctl = sunsab_break_ctl, + .startup = sunsab_startup, + .shutdown = sunsab_shutdown, + .set_termios = sunsab_set_termios, + .type = sunsab_type, + .release_port = sunsab_release_port, + .request_port = sunsab_request_port, + .config_port = sunsab_config_port, + .verify_port = sunsab_verify_port, +}; + +static struct uart_driver sunsab_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsab", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_sunsab_port *sunsab_ports; + +#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE + +static void sunsab_console_putchar(struct uart_port *port, int c) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; + + sunsab_tec_wait(up); + writeb(c, &up->regs->w.tic); +} + +static void sunsab_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, n, sunsab_console_putchar); + sunsab_tec_wait(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int sunsab_console_setup(struct console *con, char *options) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + unsigned int baud, quot; + + /* + * The console framework calls us for each and every port + * registered. Defer the console setup until the requested + * port has been properly discovered. A bit of a hack, + * though... + */ + if (up->port.type != PORT_SUNSAB) + return -1; + + printk("Console: ttyS%d (SAB82532)\n", + (sunsab_reg.minor - 64) + con->index); + + sunserial_console_termios(con, up->port.dev->of_node); + + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; + }; + + /* + * Temporary fix. + */ + spin_lock_init(&up->port.lock); + + /* + * Initialize the hardware + */ + sunsab_startup(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + quot = uart_get_divisor(&up->port, baud); + sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); + sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunsab_console = { + .name = "ttyS", + .write = sunsab_console_write, + .device = uart_console_device, + .setup = sunsab_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsab_reg, +}; + +static inline struct console *SUNSAB_CONSOLE(void) +{ + return &sunsab_console; +} +#else +#define SUNSAB_CONSOLE() (NULL) +#define sunsab_console_init() do { } while (0) +#endif + +static int __devinit sunsab_init_one(struct uart_sunsab_port *up, + struct platform_device *op, + unsigned long offset, + int line) +{ + up->port.line = line; + up->port.dev = &op->dev; + + up->port.mapbase = op->resource[0].start + offset; + up->port.membase = of_ioremap(&op->resource[0], offset, + sizeof(union sab82532_async_regs), + "sab"); + if (!up->port.membase) + return -ENOMEM; + up->regs = (union sab82532_async_regs __iomem *) up->port.membase; + + up->port.irq = op->archdata.irqs[0]; + + up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; + up->port.iotype = UPIO_MEM; + + writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); + + up->port.ops = &sunsab_pops; + up->port.type = PORT_SUNSAB; + up->port.uartclk = SAB_BASE_BAUD; + + up->type = readb(&up->regs->r.vstr) & 0x0f; + writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); + writeb(0xff, &up->regs->w.pim); + if ((up->port.line & 0x1) == 0) { + up->pvr_dsr_bit = (1 << 0); + up->pvr_dtr_bit = (1 << 1); + up->gis_shift = 2; + } else { + up->pvr_dsr_bit = (1 << 3); + up->pvr_dtr_bit = (1 << 2); + up->gis_shift = 0; + } + up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); + writeb(up->cached_pvr, &up->regs->w.pvr); + up->cached_mode = readb(&up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_FRTS; + writeb(up->cached_mode, &up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_RTS; + writeb(up->cached_mode, &up->regs->rw.mode); + + up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; + up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; + + return 0; +} + +static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int inst; + struct uart_sunsab_port *up; + int err; + + up = &sunsab_ports[inst * 2]; + + err = sunsab_init_one(&up[0], op, + 0, + (inst * 2) + 0); + if (err) + goto out; + + err = sunsab_init_one(&up[1], op, + sizeof(union sab82532_async_regs), + (inst * 2) + 1); + if (err) + goto out1; + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[0].port.line, + false); + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[1].port.line, + false); + + err = uart_add_one_port(&sunsab_reg, &up[0].port); + if (err) + goto out2; + + err = uart_add_one_port(&sunsab_reg, &up[1].port); + if (err) + goto out3; + + dev_set_drvdata(&op->dev, &up[0]); + + inst++; + + return 0; + +out3: + uart_remove_one_port(&sunsab_reg, &up[0].port); +out2: + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); +out1: + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); +out: + return err; +} + +static int __devexit sab_remove(struct platform_device *op) +{ + struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); + + uart_remove_one_port(&sunsab_reg, &up[1].port); + uart_remove_one_port(&sunsab_reg, &up[0].port); + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id sab_match[] = { + { + .name = "se", + }, + { + .name = "serial", + .compatible = "sab82532", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sab_match); + +static struct of_platform_driver sab_driver = { + .driver = { + .name = "sab", + .owner = THIS_MODULE, + .of_match_table = sab_match, + }, + .probe = sab_probe, + .remove = __devexit_p(sab_remove), +}; + +static int __init sunsab_init(void) +{ + struct device_node *dp; + int err; + int num_channels = 0; + + for_each_node_by_name(dp, "se") + num_channels += 2; + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "sab82532")) + num_channels += 2; + } + + if (num_channels) { + sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * + num_channels, GFP_KERNEL); + if (!sunsab_ports) + return -ENOMEM; + + err = sunserial_register_minors(&sunsab_reg, num_channels); + if (err) { + kfree(sunsab_ports); + sunsab_ports = NULL; + + return err; + } + } + + return of_register_platform_driver(&sab_driver); +} + +static void __exit sunsab_exit(void) +{ + of_unregister_platform_driver(&sab_driver); + if (sunsab_reg.nr) { + sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); + } + + kfree(sunsab_ports); + sunsab_ports = NULL; +} + +module_init(sunsab_init); +module_exit(sunsab_exit); + +MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); +MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunsab.h b/drivers/tty/serial/sunsab.h new file mode 100644 index 0000000..b78e1f7 --- /dev/null +++ b/drivers/tty/serial/sunsab.h @@ -0,0 +1,322 @@ +/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SUNSAB_H +#define _SUNSAB_H + +struct sab82532_async_rd_regs { + u8 rfifo[0x20]; /* Receive FIFO */ + u8 star; /* Status Register */ + u8 __pad1; + u8 mode; /* Mode Register */ + u8 timr; /* Timer Register */ + u8 xon; /* XON Character */ + u8 xoff; /* XOFF Character */ + u8 tcr; /* Termination Character Register */ + u8 dafo; /* Data Format */ + u8 rfc; /* RFIFO Control Register */ + u8 __pad2; + u8 rbcl; /* Receive Byte Count Low */ + u8 rbch; /* Receive Byte Count High */ + u8 ccr0; /* Channel Configuration Register 0 */ + u8 ccr1; /* Channel Configuration Register 1 */ + u8 ccr2; /* Channel Configuration Register 2 */ + u8 ccr3; /* Channel Configuration Register 3 */ + u8 __pad3[4]; + u8 vstr; /* Version Status Register */ + u8 __pad4[3]; + u8 gis; /* Global Interrupt Status */ + u8 ipc; /* Interrupt Port Configuration */ + u8 isr0; /* Interrupt Status 0 */ + u8 isr1; /* Interrupt Status 1 */ + u8 pvr; /* Port Value Register */ + u8 pis; /* Port Interrupt Status */ + u8 pcr; /* Port Configuration Register */ + u8 ccr4; /* Channel Configuration Register 4 */ +}; + +struct sab82532_async_wr_regs { + u8 xfifo[0x20]; /* Transmit FIFO */ + u8 cmdr; /* Command Register */ + u8 __pad1; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad2; + u8 xbcl; /* Transmit Byte Count Low */ + u8 xbch; /* Transmit Byte Count High */ + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 tsax; /* Time-Slot Assignment Reg. Transmit */ + u8 tsar; /* Time-Slot Assignment Reg. Receive */ + u8 xccr; /* Transmit Channel Capacity Register */ + u8 rccr; /* Receive Channel Capacity Register */ + u8 bgr; /* Baud Rate Generator Register */ + u8 tic; /* Transmit Immediate Character */ + u8 mxn; /* Mask XON Character */ + u8 mxf; /* Mask XOFF Character */ + u8 iva; /* Interrupt Vector Address */ + u8 ipc; + u8 imr0; /* Interrupt Mask Register 0 */ + u8 imr1; /* Interrupt Mask Register 1 */ + u8 pvr; + u8 pim; /* Port Interrupt Mask */ + u8 pcr; + u8 ccr4; +}; + +struct sab82532_async_rw_regs { /* Read/Write registers */ + u8 __pad1[0x20]; + u8 __pad2; + u8 __pad3; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad4; + u8 __pad5; + u8 __pad6; + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 __pad7; + u8 __pad8; + u8 __pad9; + u8 __pad10; + u8 __pad11; + u8 __pad12; + u8 __pad13; + u8 __pad14; + u8 __pad15; + u8 ipc; + u8 __pad16; + u8 __pad17; + u8 pvr; + u8 __pad18; + u8 pcr; + u8 ccr4; +}; + +union sab82532_async_regs { + __volatile__ struct sab82532_async_rd_regs r; + __volatile__ struct sab82532_async_wr_regs w; + __volatile__ struct sab82532_async_rw_regs rw; +}; + +union sab82532_irq_status { + unsigned short stat; + struct { + unsigned char isr0; + unsigned char isr1; + } sreg; +}; + +/* irqflags bits */ +#define SAB82532_ALLS 0x00000001 +#define SAB82532_XPR 0x00000002 +#define SAB82532_REGS_PENDING 0x00000004 + +/* RFIFO Status Byte */ +#define SAB82532_RSTAT_PE 0x80 +#define SAB82532_RSTAT_FE 0x40 +#define SAB82532_RSTAT_PARITY 0x01 + +/* Status Register (STAR) */ +#define SAB82532_STAR_XDOV 0x80 +#define SAB82532_STAR_XFW 0x40 +#define SAB82532_STAR_RFNE 0x20 +#define SAB82532_STAR_FCS 0x10 +#define SAB82532_STAR_TEC 0x08 +#define SAB82532_STAR_CEC 0x04 +#define SAB82532_STAR_CTS 0x02 + +/* Command Register (CMDR) */ +#define SAB82532_CMDR_RMC 0x80 +#define SAB82532_CMDR_RRES 0x40 +#define SAB82532_CMDR_RFRD 0x20 +#define SAB82532_CMDR_STI 0x10 +#define SAB82532_CMDR_XF 0x08 +#define SAB82532_CMDR_XRES 0x01 + +/* Mode Register (MODE) */ +#define SAB82532_MODE_FRTS 0x40 +#define SAB82532_MODE_FCTS 0x20 +#define SAB82532_MODE_FLON 0x10 +#define SAB82532_MODE_RAC 0x08 +#define SAB82532_MODE_RTS 0x04 +#define SAB82532_MODE_TRS 0x02 +#define SAB82532_MODE_TLP 0x01 + +/* Timer Register (TIMR) */ +#define SAB82532_TIMR_CNT_MASK 0xe0 +#define SAB82532_TIMR_VALUE_MASK 0x1f + +/* Data Format (DAFO) */ +#define SAB82532_DAFO_XBRK 0x40 +#define SAB82532_DAFO_STOP 0x20 +#define SAB82532_DAFO_PAR_SPACE 0x00 +#define SAB82532_DAFO_PAR_ODD 0x08 +#define SAB82532_DAFO_PAR_EVEN 0x10 +#define SAB82532_DAFO_PAR_MARK 0x18 +#define SAB82532_DAFO_PARE 0x04 +#define SAB82532_DAFO_CHL8 0x00 +#define SAB82532_DAFO_CHL7 0x01 +#define SAB82532_DAFO_CHL6 0x02 +#define SAB82532_DAFO_CHL5 0x03 + +/* RFIFO Control Register (RFC) */ +#define SAB82532_RFC_DPS 0x40 +#define SAB82532_RFC_DXS 0x20 +#define SAB82532_RFC_RFDF 0x10 +#define SAB82532_RFC_RFTH_1 0x00 +#define SAB82532_RFC_RFTH_4 0x04 +#define SAB82532_RFC_RFTH_16 0x08 +#define SAB82532_RFC_RFTH_32 0x0c +#define SAB82532_RFC_TCDE 0x01 + +/* Received Byte Count High (RBCH) */ +#define SAB82532_RBCH_DMA 0x80 +#define SAB82532_RBCH_CAS 0x20 + +/* Transmit Byte Count High (XBCH) */ +#define SAB82532_XBCH_DMA 0x80 +#define SAB82532_XBCH_CAS 0x20 +#define SAB82532_XBCH_XC 0x10 + +/* Channel Configuration Register 0 (CCR0) */ +#define SAB82532_CCR0_PU 0x80 +#define SAB82532_CCR0_MCE 0x40 +#define SAB82532_CCR0_SC_NRZ 0x00 +#define SAB82532_CCR0_SC_NRZI 0x08 +#define SAB82532_CCR0_SC_FM0 0x10 +#define SAB82532_CCR0_SC_FM1 0x14 +#define SAB82532_CCR0_SC_MANCH 0x18 +#define SAB82532_CCR0_SM_HDLC 0x00 +#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 +#define SAB82532_CCR0_SM_BISYNC 0x02 +#define SAB82532_CCR0_SM_ASYNC 0x03 + +/* Channel Configuration Register 1 (CCR1) */ +#define SAB82532_CCR1_ODS 0x10 +#define SAB82532_CCR1_BCR 0x08 +#define SAB82532_CCR1_CM_MASK 0x07 + +/* Channel Configuration Register 2 (CCR2) */ +#define SAB82532_CCR2_SOC1 0x80 +#define SAB82532_CCR2_SOC0 0x40 +#define SAB82532_CCR2_BR9 0x80 +#define SAB82532_CCR2_BR8 0x40 +#define SAB82532_CCR2_BDF 0x20 +#define SAB82532_CCR2_SSEL 0x10 +#define SAB82532_CCR2_XCS0 0x20 +#define SAB82532_CCR2_RCS0 0x10 +#define SAB82532_CCR2_TOE 0x08 +#define SAB82532_CCR2_RWX 0x04 +#define SAB82532_CCR2_DIV 0x01 + +/* Channel Configuration Register 3 (CCR3) */ +#define SAB82532_CCR3_PSD 0x01 + +/* Time Slot Assignment Register Transmit (TSAX) */ +#define SAB82532_TSAX_TSNX_MASK 0xfc +#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAX_XCS1 0x01 + +/* Time Slot Assignment Register Receive (TSAR) */ +#define SAB82532_TSAR_TSNR_MASK 0xfc +#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAR_RCS1 0x01 + +/* Version Status Register (VSTR) */ +#define SAB82532_VSTR_CD 0x80 +#define SAB82532_VSTR_DPLA 0x40 +#define SAB82532_VSTR_VN_MASK 0x0f +#define SAB82532_VSTR_VN_1 0x00 +#define SAB82532_VSTR_VN_2 0x01 +#define SAB82532_VSTR_VN_3_2 0x02 + +/* Global Interrupt Status Register (GIS) */ +#define SAB82532_GIS_PI 0x80 +#define SAB82532_GIS_ISA1 0x08 +#define SAB82532_GIS_ISA0 0x04 +#define SAB82532_GIS_ISB1 0x02 +#define SAB82532_GIS_ISB0 0x01 + +/* Interrupt Vector Address (IVA) */ +#define SAB82532_IVA_MASK 0xf1 + +/* Interrupt Port Configuration (IPC) */ +#define SAB82532_IPC_VIS 0x80 +#define SAB82532_IPC_SLA1 0x10 +#define SAB82532_IPC_SLA0 0x08 +#define SAB82532_IPC_CASM 0x04 +#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 +#define SAB82532_IPC_IC_ACT_LOW 0x01 +#define SAB82532_IPC_IC_ACT_HIGH 0x03 + +/* Interrupt Status Register 0 (ISR0) */ +#define SAB82532_ISR0_TCD 0x80 +#define SAB82532_ISR0_TIME 0x40 +#define SAB82532_ISR0_PERR 0x20 +#define SAB82532_ISR0_FERR 0x10 +#define SAB82532_ISR0_PLLA 0x08 +#define SAB82532_ISR0_CDSC 0x04 +#define SAB82532_ISR0_RFO 0x02 +#define SAB82532_ISR0_RPF 0x01 + +/* Interrupt Status Register 1 (ISR1) */ +#define SAB82532_ISR1_BRK 0x80 +#define SAB82532_ISR1_BRKT 0x40 +#define SAB82532_ISR1_ALLS 0x20 +#define SAB82532_ISR1_XOFF 0x10 +#define SAB82532_ISR1_TIN 0x08 +#define SAB82532_ISR1_CSC 0x04 +#define SAB82532_ISR1_XON 0x02 +#define SAB82532_ISR1_XPR 0x01 + +/* Interrupt Mask Register 0 (IMR0) */ +#define SAB82532_IMR0_TCD 0x80 +#define SAB82532_IMR0_TIME 0x40 +#define SAB82532_IMR0_PERR 0x20 +#define SAB82532_IMR0_FERR 0x10 +#define SAB82532_IMR0_PLLA 0x08 +#define SAB82532_IMR0_CDSC 0x04 +#define SAB82532_IMR0_RFO 0x02 +#define SAB82532_IMR0_RPF 0x01 + +/* Interrupt Mask Register 1 (IMR1) */ +#define SAB82532_IMR1_BRK 0x80 +#define SAB82532_IMR1_BRKT 0x40 +#define SAB82532_IMR1_ALLS 0x20 +#define SAB82532_IMR1_XOFF 0x10 +#define SAB82532_IMR1_TIN 0x08 +#define SAB82532_IMR1_CSC 0x04 +#define SAB82532_IMR1_XON 0x02 +#define SAB82532_IMR1_XPR 0x01 + +/* Port Interrupt Status Register (PIS) */ +#define SAB82532_PIS_SYNC_B 0x08 +#define SAB82532_PIS_DTR_B 0x04 +#define SAB82532_PIS_DTR_A 0x02 +#define SAB82532_PIS_SYNC_A 0x01 + +/* Channel Configuration Register 4 (CCR4) */ +#define SAB82532_CCR4_MCK4 0x80 +#define SAB82532_CCR4_EBRG 0x40 +#define SAB82532_CCR4_TST1 0x20 +#define SAB82532_CCR4_ICD 0x10 + + +#endif /* !(_SUNSAB_H) */ diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c new file mode 100644 index 0000000..551ebfe --- /dev/null +++ b/drivers/tty/serial/sunsu.c @@ -0,0 +1,1608 @@ +/* + * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) + * + * This is mainly a variation of 8250.c, credits go to authors mentioned + * therein. In fact this driver should be merged into the generic 8250.c + * infrastructure perhaps using a 8250_sparc.c module. + * + * Fixed to use tty_get_baud_rate(). + * Theodore Ts'o , 2001-Oct-12 + * + * Converted to new 2.5.x UART layer. + * David S. Miller (davem@davemloft.net), 2002-Jul-29 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" + +/* We are on a NS PC87303 clocked with 24.0 MHz, which results + * in a UART clock of 1.8462 MHz. + */ +#define SU_BASE_BAUD (1846200 / 16) + +enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; +static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Cirrus", 1, 0 }, + { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, + { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Startech", 1, 0 }, + { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } +}; + +struct uart_sunsu_port { + struct uart_port port; + unsigned char acr; + unsigned char ier; + unsigned short rev; + unsigned char lcr; + unsigned int lsr_break_flag; + unsigned int cflag; + + /* Probing information. */ + enum su_type su_type; + unsigned int type_probed; /* XXX Stupid */ + unsigned long reg_size; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static unsigned int serial_in(struct uart_sunsu_port *up, int offset) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + return inb(up->port.iobase + 1); + + case UPIO_MEM: + return readb(up->port.membase + offset); + + default: + return inb(up->port.iobase + offset); + } +} + +static void serial_out(struct uart_sunsu_port *up, int offset, int value) +{ +#ifndef CONFIG_SPARC64 + /* + * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are + * connected with a gate then go to SlavIO. When IRQ4 goes tristated + * gate outputs a logical one. Since we use level triggered interrupts + * we have lockup and watchdog reset. We cannot mask IRQ because + * keyboard shares IRQ with us (Word has it as Bob Smelik's design). + * This problem is similar to what Alpha people suffer, see serial.c. + */ + if (offset == UART_MCR) + value |= UART_MCR_OUT2; +#endif + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + outb(value, up->port.iobase + 1); + break; + + case UPIO_MEM: + writeb(value, up->port.membase + offset); + break; + + default: + outb(value, up->port.iobase + offset); + } +} + +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +#if 0 /* Unused currently */ +static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} +#endif + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_sunsu_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +static inline void __stop_tx(struct uart_sunsu_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void sunsu_stop_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_start_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_stop_rx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void sunsu_enable_ms(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct tty_struct * +receive_chars(struct uart_sunsu_port *up, unsigned char *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch, flag; + int max_count = 256; + int saw_console_brk = 0; + + do { + ch = serial_inp(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) + saw_console_brk = 1; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + if (*status & UART_LSR_OE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + ignore_char: + *status = serial_inp(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void transmit_chars(struct uart_sunsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + sunsu_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} + +static void check_modem_status(struct uart_sunsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&up->port.lock, flags); + + do { + struct tty_struct *tty; + + status = serial_inp(up, UART_LSR); + tty = NULL; + if (status & UART_LSR_DR) + tty = receive_chars(up, &status); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + spin_lock_irqsave(&up->port.lock, flags); + + } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return IRQ_HANDLED; +} + +/* Separate interrupt handling path for keyboard/mouse ports. */ + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot); + +static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) +{ + unsigned int cur_cflag = up->cflag; + int quot, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + quot = up->port.uartclk / (16 * new_baud); + + sunsu_change_speed(&up->port, up->cflag, 0, quot); +} + +static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) +{ + do { + unsigned char ch = serial_inp(up, UART_RX); + + /* Stop-A is handled by drivers/char/keyboard.c now. */ + if (up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (up->su_type == SU_PORT_MS) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunsu_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + break; + }; + } + } while (serial_in(up, UART_LSR) & UART_LSR_DR); +} + +static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + + if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { + unsigned char status = serial_inp(up, UART_LSR); + + if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) + receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); + } + + return IRQ_HANDLED; +} + +static unsigned int sunsu_tx_empty(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int sunsu_get_mctrl(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + serial_out(up, UART_MCR, mcr); +} + +static void sunsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int sunsu_startup(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + int retval; + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + if (up->su_type != SU_PORT_PORT) { + retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } else { + retval = request_irq(up->port.irq, sunsu_serial_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } + if (retval) { + printk("su: Cannot register IRQ %d\n", up->port.irq); + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void sunsu_shutdown(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things. + */ + (void) serial_in(up, UART_RX); + + free_irq(up->port.irq, up); +} + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char cval, fcr = 0; + unsigned long flags; + + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (uart_config[up->port.type].flags & UART_USE_FIFO) { + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; +#ifdef CONFIG_SERIAL_8250_RSA + else if (up->port.type == PORT_RSA) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; +#endif + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + } + if (up->port.type == PORT_16750) + fcr |= UART_FCR7_64BYTE; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (uart_config[up->port.type].flags & UART_STARTECH) { + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); + } + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); /* set fcr */ + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + + up->cflag = cflag; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +sunsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); +} + +static void sunsu_release_port(struct uart_port *port) +{ +} + +static int sunsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsu_config_port(struct uart_port *port, int flags) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (flags & UART_CONFIG_TYPE) { + /* + * We are supposed to call autoconfig here, but this requires + * splitting all the OBP probing crap from the UART probing. + * We'll do it when we kill sunsu.c altogether. + */ + port->type = up->type_probed; /* XXX */ + } +} + +static int +sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char * +sunsu_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops sunsu_pops = { + .tx_empty = sunsu_tx_empty, + .set_mctrl = sunsu_set_mctrl, + .get_mctrl = sunsu_get_mctrl, + .stop_tx = sunsu_stop_tx, + .start_tx = sunsu_start_tx, + .stop_rx = sunsu_stop_rx, + .enable_ms = sunsu_enable_ms, + .break_ctl = sunsu_break_ctl, + .startup = sunsu_startup, + .shutdown = sunsu_shutdown, + .set_termios = sunsu_set_termios, + .type = sunsu_type, + .release_port = sunsu_release_port, + .request_port = sunsu_request_port, + .config_port = sunsu_config_port, + .verify_port = sunsu_verify_port, +}; + +#define UART_NR 4 + +static struct uart_sunsu_port sunsu_ports[UART_NR]; + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunsu_serio_lock); + +static int sunsu_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int lsr; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + + do { + lsr = serial_in(up, UART_LSR); + } while (!(lsr & UART_LSR_THRE)); + + /* Send the character out. */ + serial_out(up, UART_TX, ch); + + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return 0; +} + +static int sunsu_serio_open(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return ret; +} + +static void sunsu_serio_close(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +static void sunsu_autoconfig(struct uart_sunsu_port *up) +{ + unsigned char status1, status2, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (up->su_type == SU_PORT_NONE) + return; + + up->type_probed = PORT_UNKNOWN; + up->port.iotype = UPIO_MEM; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, there's + * no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against false + * positives due to ISA bus float. The assumption is that + * 0x80 is a non-existent port; which should be safe since + * include/asm/io.h also makes this assumption. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0x0f); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) + goto out; /* We failed; there's nothing here */ + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) + goto out; /* We failed loopback test */ + } + serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ + serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + switch (scratch) { + case 0: + up->port.type = PORT_16450; + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + up->port.type = PORT_16550A; + break; + } + if (up->port.type == PORT_16550A) { + /* Check for Startech UART's */ + serial_outp(up, UART_LCR, UART_LCR_DLAB); + if (serial_in(up, UART_EFR) == 0) { + up->port.type = PORT_16650; + } else { + serial_outp(up, UART_LCR, 0xBF); + if (serial_in(up, UART_EFR) == 0) + up->port.type = PORT_16650V2; + } + } + if (up->port.type == PORT_16550A) { + /* Check for TI 16750 */ + serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 7) { + /* + * If this is a 16750, and not a cheap UART + * clone, then it should only go into 64 byte + * mode if the UART_FCR7_64BYTE bit was set + * while UART_LCR_DLAB was latched. + */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 6) + up->port.type = PORT_16750; + } + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_LCR, save_lcr); + if (up->port.type == PORT_16450) { + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if ((status1 != 0xa5) || (status2 != 0x5a)) + up->port.type = PORT_8250; + } + + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + if (up->port.type == PORT_UNKNOWN) + goto out; + up->type_probed = up->port.type; /* XXX */ + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(up, UART_FCR, 0); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + +out: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sunsu_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsu", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) +{ + int quot, baud; +#ifdef CONFIG_SERIO + struct serio *serio; +#endif + + if (up->su_type == SU_PORT_KBD) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + quot = up->port.uartclk / (16 * baud); + + sunsu_autoconfig(up); + if (up->port.type == PORT_UNKNOWN) + return -ENODEV; + + printk("%s: %s port at %llx, irq %u\n", + up->port.dev->of_node->full_name, + (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", + (unsigned long long) up->port.mapbase, + up->port.irq); + +#ifdef CONFIG_SERIO + serio = &up->serio; + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->su_type == SU_PORT_KBD) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "sukbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "sums", sizeof(serio->name)); + } + strlcpy(serio->phys, + (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), + sizeof(serio->phys)); + + serio->write = sunsu_serio_write; + serio->open = sunsu_serio_open; + serio->close = sunsu_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +#endif + + sunsu_change_speed(&up->port, up->cflag, 0, quot); + + sunsu_startup(&up->port); + return 0; +} + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +#ifdef CONFIG_SERIAL_SUNSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void sunsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void sunsu_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sunsu_port *up = &sunsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, sunsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first su_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init sunsu_console_setup(struct console *co, char *options) +{ + static struct ktermios dummy; + struct ktermios termios; + struct uart_port *port; + + printk("Console: ttyS%d (SU)\n", + (sunsu_reg.minor - 64) + co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &sunsu_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + /* Get firmware console settings. */ + sunserial_console_termios(co, port->dev->of_node); + + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; +} + +static struct console sunsu_console = { + .name = "ttyS", + .write = sunsu_console_write, + .device = uart_console_device, + .setup = sunsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsu_reg, +}; + +/* + * Register console. + */ + +static inline struct console *SUNSU_CONSOLE(void) +{ + return &sunsu_console; +} +#else +#define SUNSU_CONSOLE() (NULL) +#define sunsu_serial_console_init() do { } while (0) +#endif + +static enum su_type __devinit su_get_type(struct device_node *dp) +{ + struct device_node *ap = of_find_node_by_path("/aliases"); + + if (ap) { + const char *keyb = of_get_property(ap, "keyboard", NULL); + const char *ms = of_get_property(ap, "mouse", NULL); + + if (keyb) { + if (dp == of_find_node_by_path(keyb)) + return SU_PORT_KBD; + } + if (ms) { + if (dp == of_find_node_by_path(ms)) + return SU_PORT_MS; + } + } + + return SU_PORT_PORT; +} + +static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int inst; + struct device_node *dp = op->dev.of_node; + struct uart_sunsu_port *up; + struct resource *rp; + enum su_type type; + bool ignore_line; + int err; + + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } + + up->port.line = inst; + + spin_lock_init(&up->port.lock); + + up->su_type = type; + + rp = &op->resource[0]; + up->port.mapbase = rp->start; + up->reg_size = (rp->end - rp->start) + 1; + up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); + return -ENOMEM; + } + + up->port.irq = op->archdata.irqs[0]; + + up->port.dev = &op->dev; + + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); + + err = 0; + if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { + err = sunsu_kbd_ms_init(up); + if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); + kfree(up); + return err; + } + dev_set_drvdata(&op->dev, up); + + return 0; + } + + up->port.flags |= UPF_BOOT_AUTOCONF; + + sunsu_autoconfig(up); + + err = -ENODEV; + if (up->port.type == PORT_UNKNOWN) + goto out_unmap; + + up->port.ops = &sunsu_pops; + + ignore_line = false; + if (!strcmp(dp->name, "rsc-console") || + !strcmp(dp->name, "lom-console")) + ignore_line = true; + + sunserial_console_match(SUNSU_CONSOLE(), dp, + &sunsu_reg, up->port.line, + ignore_line); + err = uart_add_one_port(&sunsu_reg, &up->port); + if (err) + goto out_unmap; + + dev_set_drvdata(&op->dev, up); + + inst++; + + return 0; + +out_unmap: + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + return err; +} + +static int __devexit su_remove(struct platform_device *op) +{ + struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); + bool kbdms = false; + + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) + kbdms = true; + + if (kbdms) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else if (up->port.type != PORT_UNKNOWN) + uart_remove_one_port(&sunsu_reg, &up->port); + + if (up->port.membase) + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + + if (kbdms) + kfree(up); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id su_match[] = { + { + .name = "su", + }, + { + .name = "su_pnp", + }, + { + .name = "serial", + .compatible = "su", + }, + { + .type = "serial", + .compatible = "su", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, su_match); + +static struct of_platform_driver su_driver = { + .driver = { + .name = "su", + .owner = THIS_MODULE, + .of_match_table = su_match, + }, + .probe = su_probe, + .remove = __devexit_p(su_remove), +}; + +static int __init sunsu_init(void) +{ + struct device_node *dp; + int err; + int num_uart = 0; + + for_each_node_by_name(dp, "su") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "su_pnp") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + + if (num_uart) { + err = sunserial_register_minors(&sunsu_reg, num_uart); + if (err) + return err; + } + + err = of_register_platform_driver(&su_driver); + if (err && num_uart) + sunserial_unregister_minors(&sunsu_reg, num_uart); + + return err; +} + +static void __exit sunsu_exit(void) +{ + if (sunsu_reg.nr) + sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); +} + +module_init(sunsu_init); +module_exit(sunsu_exit); + +MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); +MODULE_DESCRIPTION("Sun SU serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c new file mode 100644 index 0000000..c1967ac --- /dev/null +++ b/drivers/tty/serial/sunzilog.c @@ -0,0 +1,1655 @@ +/* sunzilog.c: Zilog serial driver for Sparc systems. + * + * Driver for Zilog serial chips found on Sun workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the old drivers/sbus/char/zs.c code. A lot + * of code has been simply moved over directly from there but + * much has been rewritten. Credits therefore go out to Eddie + * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their + * work there. + * + * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunzilog.h" + +/* On 32-bit sparcs we need to delay after register accesses + * to accommodate sun4 systems, but we do not need to flush writes. + * On 64-bit sparc we only need to flush single writes to ensure + * completion. + */ +#ifndef CONFIG_SPARC64 +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) +#else +#define ZSDELAY() +#define ZSDELAY_LONG() +#define ZS_WSYNC(__channel) \ + readb(&((__channel)->control)) +#endif + +#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_sunzilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_sunzilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 +#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 +#define SUNZILOG_FLAG_IS_CONS 0x00000004 +#define SUNZILOG_FLAG_IS_KGDB 0x00000008 +#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 +#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define SUNZILOG_FLAG_REGS_HELD 0x00000040 +#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 +#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 +#define SUNZILOG_FLAG_ESCC 0x00000200 +#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 + + unsigned int cflag; + + unsigned char parity_mask; + unsigned char prev_status; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static void sunzilog_putchar(struct uart_port *port, int ch); + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) + +#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) +#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) +#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the Sun4 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) +{ + int i; + int escc; + unsigned char r15; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + sunzilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); + + /* ESCC Extension Register */ + r15 = read_zsreg(channel, R15); + if (r15 & 0x01) { + write_zsreg(channel, R7, regs[R7p]); + + /* External status interrupt and FIFO control. */ + write_zsreg(channel, R15, regs[R15] & ~WR7pEN); + escc = 1; + } else { + /* Clear FIFO bit case it is an issue */ + regs[R15] &= ~FIFOEN; + escc = 0; + } + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ + write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); + + return escc; +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= SUNZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) +{ + unsigned int cur_cflag = up->cflag; + int brg, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); +} + +static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, + unsigned char ch, int is_break) +{ + if (ZS_IS_KEYB(up)) { + /* Stop-A is handled by drivers/char/keyboard.c now. */ +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (ZS_IS_MOUSE(up)) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunzilog_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + break; + }; + } +} + +static struct tty_struct * +sunzilog_receive_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct tty_struct *tty; + unsigned char ch, r1, flag; + + tty = NULL; + if (up->port.state != NULL && /* Unopened serial console */ + up->port.state->port.tty != NULL) /* Keyboard || mouse */ + tty = up->port.state->port.tty; + + for (;;) { + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + break; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { + sunzilog_kbdms_receive_chars(up, ch, 0); + continue; + } + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch); + continue; + } + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + return tty; +} + +static void sunzilog_status_handle(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (status & BRK_ABRT) { + if (ZS_IS_MOUSE(up)) + sunzilog_kbdms_receive_chars(up, 0, 1); + if (ZS_IS_CONS(up)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + status = readb(&channel->control); + ZSDELAY(); + if (!(status & BRK_ABRT)) + break; + } + sun_do_break(); + return; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~SUNZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) +{ + struct uart_sunzilog_port *up = dev_id; + + while (up) { + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + tty = sunzilog_receive_chars(up, channel); + if (r3 & CHAEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHATxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + tty = sunzilog_receive_chars(up, channel); + if (r3 & CHBEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHBTxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel __iomem *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = sunzilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int sunzilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_stop_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + + up->flags |= SUNZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_start_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held. */ +static void sunzilog_stop_rx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + sunzilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void sunzilog_enable_ms(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); + } +} + +/* The port lock is not held. */ +static void sunzilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __sunzilog_startup(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + sunzilog_maybe_update_regs(up, channel); +} + +static int sunzilog_startup(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __sunzilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void sunzilog_shutdown(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + sunzilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[R3] &= ~RxN_MASK; + up->curregs[R5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[R3] |= Rx5; + up->curregs[R5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[R3] |= Rx6; + up->curregs[R5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[R3] |= Rx7; + up->curregs[R5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[R3] |= Rx8; + up->curregs[R5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[R4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[R4] |= SB2; + else + up->curregs[R4] |= SB1; + if (cflag & PARENB) + up->curregs[R4] |= PAR_ENAB; + else + up->curregs[R4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[R4] |= PAR_EVEN; + else + up->curregs[R4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= SUNZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunzilog_type(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + + return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void sunzilog_release_port(struct uart_port *port) +{ +} + +static int sunzilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void sunzilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops sunzilog_pops = { + .tx_empty = sunzilog_tx_empty, + .set_mctrl = sunzilog_set_mctrl, + .get_mctrl = sunzilog_get_mctrl, + .stop_tx = sunzilog_stop_tx, + .start_tx = sunzilog_start_tx, + .stop_rx = sunzilog_stop_rx, + .enable_ms = sunzilog_enable_ms, + .break_ctl = sunzilog_break_ctl, + .startup = sunzilog_startup, + .shutdown = sunzilog_shutdown, + .set_termios = sunzilog_set_termios, + .type = sunzilog_type, + .release_port = sunzilog_release_port, + .request_port = sunzilog_request_port, + .config_port = sunzilog_config_port, + .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif +}; + +static int uart_chip_count; +static struct uart_sunzilog_port *sunzilog_port_table; +static struct zilog_layout __iomem **sunzilog_chip_regs; + +static struct uart_sunzilog_port *sunzilog_irq_chain; + +static struct uart_driver sunzilog_reg = { + .owner = THIS_MODULE, + .driver_name = "sunzilog", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __init sunzilog_alloc_tables(int num_sunzilog) +{ + struct uart_sunzilog_port *up; + unsigned long size; + int num_channels = num_sunzilog * 2; + int i; + + size = num_channels * sizeof(struct uart_sunzilog_port); + sunzilog_port_table = kzalloc(size, GFP_KERNEL); + if (!sunzilog_port_table) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + up = &sunzilog_port_table[i]; + + spin_lock_init(&up->port.lock); + + if (i == 0) + sunzilog_irq_chain = up; + + if (i < num_channels - 1) + up->next = up + 1; + else + up->next = NULL; + } + + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); + sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); + if (!sunzilog_chip_regs) { + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + return -ENOMEM; + } + + return 0; +} + +static void sunzilog_free_tables(void) +{ + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + kfree(sunzilog_chip_regs); +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +static void sunzilog_putchar(struct uart_port *port, int ch) +{ + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunzilog_serio_lock); + +static int sunzilog_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + + sunzilog_putchar(&up->port, ch); + + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return 0; +} + +static int sunzilog_serio_open(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return ret; +} + +static void sunzilog_serio_close(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE +static void +sunzilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, count, sunzilog_putchar); + udelay(2); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init sunzilog_console_setup(struct console *con, char *options) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + if (up->port.type != PORT_SUNZILOG) + return -1; + + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", + (sunzilog_reg.minor - 64) + con->index, con->index); + + /* Get firmware console settings. */ + sunserial_console_termios(con, up->port.dev->of_node); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + }; + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + sunzilog_convert_to_zs(up, con->cflag, 0, brg); + + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunzilog_console_ops = { + .name = "ttyS", + .write = sunzilog_console_write, + .device = uart_console_device, + .setup = sunzilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunzilog_reg, +}; + +static inline struct console *SUNZILOG_CONSOLE(void) +{ + return &sunzilog_console_ops; +} + +#else +#define SUNZILOG_CONSOLE() (NULL) +#endif + +static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) +{ + int baud, brg; + + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + + up->curregs[R15] |= BRKIE; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + sunzilog_convert_to_zs(up, up->cflag, 0, brg); + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); +} + +#ifdef CONFIG_SERIO +static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) +{ + struct serio *serio = &up->serio; + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "zskbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "zsms", sizeof(serio->name)); + } + strlcpy(serio->phys, + ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? + "zs/serio0" : "zs/serio1"), + sizeof(serio->phys)); + + serio->write = sunzilog_serio_write; + serio->open = sunzilog_serio_open; + serio->close = sunzilog_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +} +#endif + +static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + unsigned long flags; + int baud, brg; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) { + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R7p] = 0x00; + sunzilog_init_kbdms(up); + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } else { + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ + up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + +#ifdef CONFIG_SERIO + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) + sunzilog_register_serio(up); +#endif +} + +static int zilog_irq = -1; + +static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int kbm_inst, uart_inst; + int inst; + struct uart_sunzilog_port *up; + struct zilog_layout __iomem *rp; + int keyboard_mouse = 0; + int err; + + if (of_find_property(op->dev.of_node, "keyboard", NULL)) + keyboard_mouse = 1; + + /* uarts must come before keyboards/mice */ + if (keyboard_mouse) + inst = uart_chip_count + kbm_inst; + else + inst = uart_inst; + + sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, + sizeof(struct zilog_layout), + "zs"); + if (!sunzilog_chip_regs[inst]) + return -ENOMEM; + + rp = sunzilog_chip_regs[inst]; + + if (zilog_irq == -1) + zilog_irq = op->archdata.irqs[0]; + + up = &sunzilog_port_table[inst * 2]; + + /* Channel A */ + up[0].port.mapbase = op->resource[0].start + 0x00; + up[0].port.membase = (void __iomem *) &rp->channelA; + up[0].port.iotype = UPIO_MEM; + up[0].port.irq = op->archdata.irqs[0]; + up[0].port.uartclk = ZS_CLOCK; + up[0].port.fifosize = 1; + up[0].port.ops = &sunzilog_pops; + up[0].port.type = PORT_SUNZILOG; + up[0].port.flags = 0; + up[0].port.line = (inst * 2) + 0; + up[0].port.dev = &op->dev; + up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; + if (keyboard_mouse) + up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; + sunzilog_init_hw(&up[0]); + + /* Channel B */ + up[1].port.mapbase = op->resource[0].start + 0x04; + up[1].port.membase = (void __iomem *) &rp->channelB; + up[1].port.iotype = UPIO_MEM; + up[1].port.irq = op->archdata.irqs[0]; + up[1].port.uartclk = ZS_CLOCK; + up[1].port.fifosize = 1; + up[1].port.ops = &sunzilog_pops; + up[1].port.type = PORT_SUNZILOG; + up[1].port.flags = 0; + up[1].port.line = (inst * 2) + 1; + up[1].port.dev = &op->dev; + up[1].flags |= 0; + if (keyboard_mouse) + up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; + sunzilog_init_hw(&up[1]); + + if (!keyboard_mouse) { + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[0].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[0].port); + if (err) { + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[1].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[1].port); + if (err) { + uart_remove_one_port(&sunzilog_reg, &up[0].port); + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + uart_inst++; + } else { + printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[0].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[0].port)); + printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[1].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[1].port)); + kbm_inst++; + } + + dev_set_drvdata(&op->dev, &up[0]); + + return 0; +} + +static void __devexit zs_remove_one(struct uart_sunzilog_port *up) +{ + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else + uart_remove_one_port(&sunzilog_reg, &up->port); +} + +static int __devexit zs_remove(struct platform_device *op) +{ + struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev); + struct zilog_layout __iomem *regs; + + zs_remove_one(&up[0]); + zs_remove_one(&up[1]); + + regs = sunzilog_chip_regs[up[0].port.line / 2]; + of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id zs_match[] = { + { + .name = "zs", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, zs_match); + +static struct of_platform_driver zs_driver = { + .driver = { + .name = "zs", + .owner = THIS_MODULE, + .of_match_table = zs_match, + }, + .probe = zs_probe, + .remove = __devexit_p(zs_remove), +}; + +static int __init sunzilog_init(void) +{ + struct device_node *dp; + int err; + int num_keybms = 0; + int num_sunzilog = 0; + + for_each_node_by_name(dp, "zs") { + num_sunzilog++; + if (of_find_property(dp, "keyboard", NULL)) + num_keybms++; + } + + if (num_sunzilog) { + err = sunzilog_alloc_tables(num_sunzilog); + if (err) + goto out; + + uart_chip_count = num_sunzilog - num_keybms; + + err = sunserial_register_minors(&sunzilog_reg, + uart_chip_count * 2); + if (err) + goto out_free_tables; + } + + err = of_register_platform_driver(&zs_driver); + if (err) + goto out_unregister_uart; + + if (zilog_irq != -1) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, + "zs", sunzilog_irq_chain); + if (err) + goto out_unregister_driver; + + /* Enable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags |= SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + } + +out: + return err; + +out_unregister_driver: + of_unregister_platform_driver(&zs_driver); + +out_unregister_uart: + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); + sunzilog_reg.cons = NULL; + } + +out_free_tables: + sunzilog_free_tables(); + goto out; +} + +static void __exit sunzilog_exit(void) +{ + of_unregister_platform_driver(&zs_driver); + + if (zilog_irq != -1) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + + /* Disable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] &= ~MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + + free_irq(zilog_irq, sunzilog_irq_chain); + zilog_irq = -1; + } + + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); + sunzilog_free_tables(); + } +} + +module_init(sunzilog_init); +module_exit(sunzilog_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("Sun Zilog serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.h b/drivers/tty/serial/sunzilog.h new file mode 100644 index 0000000..5dec7b4 --- /dev/null +++ b/drivers/tty/serial/sunzilog.h @@ -0,0 +1,289 @@ +#ifndef _SUNZILOG_H +#define _SUNZILOG_H + +struct zilog_channel { + volatile unsigned char control; + volatile unsigned char __pad1; + volatile unsigned char data; + volatile unsigned char __pad2; +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 17 +#define R7p 16 /* Written as R7 with P15 bit 0 set */ + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (ESCC Only) */ +#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */ +#define AUTO_EOM_RST 2 /* Automatic EOM Reset */ +#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */ +#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */ +#define nDTRnREQ 0x10 /* /DTR/REQ timing */ +#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */ +#define EXT_RD_EN 0x40 /* Extended read register enable */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define WR7pEN 1 /* WR7' Enable (ESCC only) */ +#define ZCIE 2 /* Zero count IE */ +#define FIFOEN 4 /* FIFO Enable (ESCC only) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (LSB frame byte count [Not on NMOS]) */ + +/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _SUNZILOG_H */ diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c new file mode 100644 index 0000000..1f36b7e --- /dev/null +++ b/drivers/tty/serial/timbuart.c @@ -0,0 +1,531 @@ +/* + * timbuart.c timberdale FPGA UART driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "timbuart.h" + +struct timbuart_port { + struct uart_port port; + struct tasklet_struct tasklet; + int usedma; + u32 last_ier; + struct platform_device *dev; +}; + +static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, + 921600, 1843200, 3250000}; + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); + +static void timbuart_stop_rx(struct uart_port *port) +{ + /* spin lock held by upper layer, disable all RX interrupts */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_stop_tx(struct uart_port *port) +{ + /* spinlock held by upper layer, disable TX interrupt */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_start_tx(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + /* do not transfer anything here -> fire off the tasklet */ + tasklet_schedule(&uart->tasklet); +} + +static unsigned int timbuart_tx_empty(struct uart_port *port) +{ + u32 isr = ioread32(port->membase + TIMBUART_ISR); + + return (isr & TXBE) ? TIOCSER_TEMT : 0; +} + +static void timbuart_flush_buffer(struct uart_port *port) +{ + if (!timbuart_tx_empty(port)) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHTX; + + iowrite8(ctl, port->membase + TIMBUART_CTRL); + iowrite32(TXBF, port->membase + TIMBUART_ISR); + } +} + +static void timbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + + while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { + u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); + port->icount.rx++; + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(port->state->port.tty); + spin_lock(&port->lock); + + dev_dbg(port->dev, "%s - total read %d bytes\n", + __func__, port->icount.rx); +} + +static void timbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && + !uart_circ_empty(xmit)) { + iowrite8(xmit->buf[xmit->tail], + port->membase + TIMBUART_TXFIFO); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + dev_dbg(port->dev, + "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", + __func__, + port->icount.tx, + ioread8(port->membase + TIMBUART_CTRL), + port->mctrl & TIOCM_RTS, + ioread8(port->membase + TIMBUART_BAUDRATE)); +} + +static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + if (port->x_char) + return; + + if (isr & TXFLAGS) { + timbuart_tx_chars(port); + /* clear all TX interrupts */ + iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } else + /* Re-enable any tx interrupt */ + *ier |= uart->last_ier & TXFLAGS; + + /* enable interrupts if there are chars in the transmit buffer, + * Or if we delivered some bytes and want the almost empty interrupt + * we wake up the upper layer later when we got the interrupt + * to give it some time to go out... + */ + if (!uart_circ_empty(xmit)) + *ier |= TXBAE; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + if (isr & RXFLAGS) { + /* Some RX status is set */ + if (isr & RXBF) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHRX; + iowrite8(ctl, port->membase + TIMBUART_CTRL); + port->icount.overrun++; + } else if (isr & (RXDP)) + timbuart_rx_chars(port); + + /* ack all RX interrupts */ + iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); + } + + /* always have the RX interrupts enabled */ + *ier |= RXBAF | RXBF | RXTT; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_tasklet(unsigned long arg) +{ + struct timbuart_port *uart = (struct timbuart_port *)arg; + u32 isr, ier = 0; + + spin_lock(&uart->port.lock); + + isr = ioread32(uart->port.membase + TIMBUART_ISR); + dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); + + if (!uart->usedma) + timbuart_handle_tx_port(&uart->port, isr, &ier); + + timbuart_mctrl_check(&uart->port, isr, &ier); + + if (!uart->usedma) + timbuart_handle_rx_port(&uart->port, isr, &ier); + + iowrite32(ier, uart->port.membase + TIMBUART_IER); + + spin_unlock(&uart->port.lock); + dev_dbg(uart->port.dev, "%s leaving\n", __func__); +} + +static unsigned int timbuart_get_mctrl(struct uart_port *port) +{ + u8 cts = ioread8(port->membase + TIMBUART_CTRL); + dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); + + if (cts & TIMBUART_CTRL_CTS) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); + + if (mctrl & TIOCM_RTS) + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); + else + iowrite8(0, port->membase + TIMBUART_CTRL); +} + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) +{ + unsigned int cts; + + if (isr & CTS_DELTA) { + /* ack */ + iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); + cts = timbuart_get_mctrl(port); + uart_handle_cts_change(port, cts & TIOCM_CTS); + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + *ier |= CTS_DELTA; +} + +static void timbuart_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void timbuart_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int timbuart_startup(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + dev_dbg(port->dev, "%s\n", __func__); + + iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); + iowrite32(0x1ff, port->membase + TIMBUART_ISR); + /* Enable all but TX interrupts */ + iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, + port->membase + TIMBUART_IER); + + return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, + "timb-uart", uart); +} + +static void timbuart_shutdown(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + dev_dbg(port->dev, "%s\n", __func__); + free_irq(port->irq, uart); + iowrite32(0, port->membase + TIMBUART_IER); +} + +static int get_bindex(int baud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(baudrates); i++) + if (baud <= baudrates[i]) + return i; + + return -1; +} + +static void timbuart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + short bindex; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + bindex = get_bindex(baud); + dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); + + if (bindex < 0) + bindex = 0; + baud = baudrates[bindex]; + + /* The serial layer calls into this once with old = NULL when setting + up initially */ + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *timbuart_type(struct uart_port *port) +{ + return port->type == PORT_UNKNOWN ? "timbuart" : NULL; +} + +/* We do not request/release mappings of the registers here, + * currently it's done in the proble function. + */ +static void timbuart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); +} + +static int timbuart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (!request_mem_region(port->mapbase, size, "timb-uart")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) +{ + struct timbuart_port *uart = (struct timbuart_port *)devid; + + if (ioread8(uart->port.membase + TIMBUART_IPR)) { + uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); + + /* disable interrupts, the tasklet enables them again */ + iowrite32(0, uart->port.membase + TIMBUART_IER); + + /* fire off bottom half */ + tasklet_schedule(&uart->tasklet); + + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * Configure/autoconfigure the port. + */ +static void timbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_TIMBUART; + timbuart_request_port(port); + } +} + +static int timbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static struct uart_ops timbuart_ops = { + .tx_empty = timbuart_tx_empty, + .set_mctrl = timbuart_set_mctrl, + .get_mctrl = timbuart_get_mctrl, + .stop_tx = timbuart_stop_tx, + .start_tx = timbuart_start_tx, + .flush_buffer = timbuart_flush_buffer, + .stop_rx = timbuart_stop_rx, + .enable_ms = timbuart_enable_ms, + .break_ctl = timbuart_break_ctl, + .startup = timbuart_startup, + .shutdown = timbuart_shutdown, + .set_termios = timbuart_set_termios, + .type = timbuart_type, + .release_port = timbuart_release_port, + .request_port = timbuart_request_port, + .config_port = timbuart_config_port, + .verify_port = timbuart_verify_port +}; + +static struct uart_driver timbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "timberdale_uart", + .dev_name = "ttyTU", + .major = TIMBUART_MAJOR, + .minor = TIMBUART_MINOR, + .nr = 1 +}; + +static int __devinit timbuart_probe(struct platform_device *dev) +{ + int err, irq; + struct timbuart_port *uart; + struct resource *iomem; + + dev_dbg(&dev->dev, "%s\n", __func__); + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + err = -EINVAL; + goto err_mem; + } + + uart->usedma = 0; + + uart->port.uartclk = 3250000 * 16; + uart->port.fifosize = TIMBUART_FIFO_SIZE; + uart->port.regshift = 2; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &timbuart_ops; + uart->port.irq = 0; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = 0; + uart->port.dev = &dev->dev; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) { + err = -ENOMEM; + goto err_register; + } + uart->port.mapbase = iomem->start; + uart->port.membase = NULL; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + err = -EINVAL; + goto err_register; + } + uart->port.irq = irq; + + tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); + + err = uart_register_driver(&timbuart_driver); + if (err) + goto err_register; + + err = uart_add_one_port(&timbuart_driver, &uart->port); + if (err) + goto err_add_port; + + platform_set_drvdata(dev, uart); + + return 0; + +err_add_port: + uart_unregister_driver(&timbuart_driver); +err_register: + kfree(uart); +err_mem: + printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", + err); + + return err; +} + +static int __devexit timbuart_remove(struct platform_device *dev) +{ + struct timbuart_port *uart = platform_get_drvdata(dev); + + tasklet_kill(&uart->tasklet); + uart_remove_one_port(&timbuart_driver, &uart->port); + uart_unregister_driver(&timbuart_driver); + kfree(uart); + + return 0; +} + +static struct platform_driver timbuart_platform_driver = { + .driver = { + .name = "timb-uart", + .owner = THIS_MODULE, + }, + .probe = timbuart_probe, + .remove = __devexit_p(timbuart_remove), +}; + +/*--------------------------------------------------------------------------*/ + +static int __init timbuart_init(void) +{ + return platform_driver_register(&timbuart_platform_driver); +} + +static void __exit timbuart_exit(void) +{ + platform_driver_unregister(&timbuart_platform_driver); +} + +module_init(timbuart_init); +module_exit(timbuart_exit); + +MODULE_DESCRIPTION("Timberdale UART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:timb-uart"); + diff --git a/drivers/tty/serial/timbuart.h b/drivers/tty/serial/timbuart.h new file mode 100644 index 0000000..7e56676 --- /dev/null +++ b/drivers/tty/serial/timbuart.h @@ -0,0 +1,58 @@ +/* + * timbuart.c timberdale FPGA GPIO driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#ifndef _TIMBUART_H +#define _TIMBUART_H + +#define TIMBUART_FIFO_SIZE 2048 + +#define TIMBUART_RXFIFO 0x08 +#define TIMBUART_TXFIFO 0x0c +#define TIMBUART_IER 0x10 +#define TIMBUART_IPR 0x14 +#define TIMBUART_ISR 0x18 +#define TIMBUART_CTRL 0x1c +#define TIMBUART_BAUDRATE 0x20 + +#define TIMBUART_CTRL_RTS 0x01 +#define TIMBUART_CTRL_CTS 0x02 +#define TIMBUART_CTRL_FLSHTX 0x40 +#define TIMBUART_CTRL_FLSHRX 0x80 + +#define TXBF 0x01 +#define TXBAE 0x02 +#define CTS_DELTA 0x04 +#define RXDP 0x08 +#define RXBAF 0x10 +#define RXBF 0x20 +#define RXTT 0x40 +#define RXBNAE 0x80 +#define TXBE 0x100 + +#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) +#define TXFLAGS (TXBF | TXBAE) + +#define TIMBUART_MAJOR 204 +#define TIMBUART_MINOR 192 + +#endif /* _TIMBUART_H */ + diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c new file mode 100644 index 0000000..d2fce86 --- /dev/null +++ b/drivers/tty/serial/uartlite.c @@ -0,0 +1,709 @@ +/* + * uartlite.c: Serial driver for Xilinx uartlite serial controller + * + * Copyright (C) 2006 Peter Korsgaard + * Copyright (C) 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) +#include +#include +#include +#include + +/* Match table for of_platform binding */ +static struct of_device_id ulite_of_match[] __devinitdata = { + { .compatible = "xlnx,opb-uartlite-1.00.b", }, + { .compatible = "xlnx,xps-uartlite-1.00.a", }, + {} +}; +MODULE_DEVICE_TABLE(of, ulite_of_match); + +#endif + +#define ULITE_NAME "ttyUL" +#define ULITE_MAJOR 204 +#define ULITE_MINOR 187 +#define ULITE_NR_UARTS 4 + +/* --------------------------------------------------------------------- + * Register definitions + * + * For register details see datasheet: + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf + */ + +#define ULITE_RX 0x00 +#define ULITE_TX 0x04 +#define ULITE_STATUS 0x08 +#define ULITE_CONTROL 0x0c + +#define ULITE_REGION 16 + +#define ULITE_STATUS_RXVALID 0x01 +#define ULITE_STATUS_RXFULL 0x02 +#define ULITE_STATUS_TXEMPTY 0x04 +#define ULITE_STATUS_TXFULL 0x08 +#define ULITE_STATUS_IE 0x10 +#define ULITE_STATUS_OVERRUN 0x20 +#define ULITE_STATUS_FRAME 0x40 +#define ULITE_STATUS_PARITY 0x80 + +#define ULITE_CONTROL_RST_TX 0x01 +#define ULITE_CONTROL_RST_RX 0x02 +#define ULITE_CONTROL_IE 0x10 + + +static struct uart_port ulite_ports[ULITE_NR_UARTS]; + +/* --------------------------------------------------------------------- + * Core UART driver operations + */ + +static int ulite_receive(struct uart_port *port, int stat) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned char ch = 0; + char flag = TTY_NORMAL; + + if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_FRAME)) == 0) + return 0; + + /* stats */ + if (stat & ULITE_STATUS_RXVALID) { + port->icount.rx++; + ch = ioread32be(port->membase + ULITE_RX); + + if (stat & ULITE_STATUS_PARITY) + port->icount.parity++; + } + + if (stat & ULITE_STATUS_OVERRUN) + port->icount.overrun++; + + if (stat & ULITE_STATUS_FRAME) + port->icount.frame++; + + + /* drop byte with parity error if IGNPAR specificed */ + if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY) + stat &= ~ULITE_STATUS_RXVALID; + + stat &= port->read_status_mask; + + if (stat & ULITE_STATUS_PARITY) + flag = TTY_PARITY; + + + stat &= ~port->ignore_status_mask; + + if (stat & ULITE_STATUS_RXVALID) + tty_insert_flip_char(tty, ch, flag); + + if (stat & ULITE_STATUS_FRAME) + tty_insert_flip_char(tty, 0, TTY_FRAME); + + if (stat & ULITE_STATUS_OVERRUN) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + return 1; +} + +static int ulite_transmit(struct uart_port *port, int stat) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (stat & ULITE_STATUS_TXFULL) + return 0; + + if (port->x_char) { + iowrite32be(port->x_char, port->membase + ULITE_TX); + port->x_char = 0; + port->icount.tx++; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return 0; + + iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + port->icount.tx++; + + /* wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + return 1; +} + +static irqreturn_t ulite_isr(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + int busy, n = 0; + + do { + int stat = ioread32be(port->membase + ULITE_STATUS); + busy = ulite_receive(port, stat); + busy |= ulite_transmit(port, stat); + n++; + } while (busy); + + /* work done? */ + if (n > 1) { + tty_flip_buffer_push(port->state->port.tty); + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static unsigned int ulite_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + ret = ioread32be(port->membase + ULITE_STATUS); + spin_unlock_irqrestore(&port->lock, flags); + + return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int ulite_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* N/A */ +} + +static void ulite_stop_tx(struct uart_port *port) +{ + /* N/A */ +} + +static void ulite_start_tx(struct uart_port *port) +{ + ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS)); +} + +static void ulite_stop_rx(struct uart_port *port) +{ + /* don't forward any more data (like !CREAD) */ + port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; +} + +static void ulite_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void ulite_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int ulite_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, ulite_isr, + IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); + if (ret) + return ret; + + iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX, + port->membase + ULITE_CONTROL); + iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); + + return 0; +} + +static void ulite_shutdown(struct uart_port *port) +{ + iowrite32be(0, port->membase + ULITE_CONTROL); + ioread32be(port->membase + ULITE_CONTROL); /* dummy */ + free_irq(port->irq, port); +} + +static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_TXFULL; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= + ULITE_STATUS_PARITY | ULITE_STATUS_FRAME; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= + ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* update timeout */ + baud = uart_get_baud_rate(port, termios, old, 0, 460800); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *ulite_type(struct uart_port *port) +{ + return port->type == PORT_UARTLITE ? "uartlite" : NULL; +} + +static void ulite_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, ULITE_REGION); + iounmap(port->membase); + port->membase = NULL; +} + +static int ulite_request_port(struct uart_port *port) +{ + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); + + if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, ULITE_REGION); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, ULITE_REGION); + return -EBUSY; + } + + return 0; +} + +static void ulite_config_port(struct uart_port *port, int flags) +{ + if (!ulite_request_port(port)) + port->type = PORT_UARTLITE; +} + +static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int ulite_get_poll_char(struct uart_port *port) +{ + if (!(ioread32be(port->membase + ULITE_STATUS) + & ULITE_STATUS_RXVALID)) + return NO_POLL_CHAR; + + return ioread32be(port->membase + ULITE_RX); +} + +static void ulite_put_poll_char(struct uart_port *port, unsigned char ch) +{ + while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL) + cpu_relax(); + + /* write char to device */ + iowrite32be(ch, port->membase + ULITE_TX); +} +#endif + +static struct uart_ops ulite_ops = { + .tx_empty = ulite_tx_empty, + .set_mctrl = ulite_set_mctrl, + .get_mctrl = ulite_get_mctrl, + .stop_tx = ulite_stop_tx, + .start_tx = ulite_start_tx, + .stop_rx = ulite_stop_rx, + .enable_ms = ulite_enable_ms, + .break_ctl = ulite_break_ctl, + .startup = ulite_startup, + .shutdown = ulite_shutdown, + .set_termios = ulite_set_termios, + .type = ulite_type, + .release_port = ulite_release_port, + .request_port = ulite_request_port, + .config_port = ulite_config_port, + .verify_port = ulite_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = ulite_get_poll_char, + .poll_put_char = ulite_put_poll_char, +#endif +}; + +/* --------------------------------------------------------------------- + * Console driver operations + */ + +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE +static void ulite_console_wait_tx(struct uart_port *port) +{ + int i; + u8 val; + + /* Spin waiting for TX fifo to have space available */ + for (i = 0; i < 100000; i++) { + val = ioread32be(port->membase + ULITE_STATUS); + if ((val & ULITE_STATUS_TXFULL) == 0) + break; + cpu_relax(); + } +} + +static void ulite_console_putchar(struct uart_port *port, int ch) +{ + ulite_console_wait_tx(port); + iowrite32be(ch, port->membase + ULITE_TX); +} + +static void ulite_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &ulite_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + if (oops_in_progress) { + locked = spin_trylock_irqsave(&port->lock, flags); + } else + spin_lock_irqsave(&port->lock, flags); + + /* save and disable interrupt */ + ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE; + iowrite32be(0, port->membase + ULITE_CONTROL); + + uart_console_write(port, s, count, ulite_console_putchar); + + ulite_console_wait_tx(port); + + /* restore interrupt state */ + if (ier) + iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int __devinit ulite_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= ULITE_NR_UARTS) + return -EINVAL; + + port = &ulite_ports[co->index]; + + /* Has the device been initialized yet? */ + if (!port->mapbase) { + pr_debug("console on ttyUL%i not present\n", co->index); + return -ENODEV; + } + + /* not initialized yet? */ + if (!port->membase) { + if (ulite_request_port(port)) + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver ulite_uart_driver; + +static struct console ulite_console = { + .name = ULITE_NAME, + .write = ulite_console_write, + .device = uart_console_device, + .setup = ulite_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */ + .data = &ulite_uart_driver, +}; + +static int __init ulite_console_init(void) +{ + register_console(&ulite_console); + return 0; +} + +console_initcall(ulite_console_init); + +#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */ + +static struct uart_driver ulite_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "uartlite", + .dev_name = ULITE_NAME, + .major = ULITE_MAJOR, + .minor = ULITE_MINOR, + .nr = ULITE_NR_UARTS, +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE + .cons = &ulite_console, +#endif +}; + +/* --------------------------------------------------------------------- + * Port assignment functions (mapping devices to uart_port structures) + */ + +/** ulite_assign: register a uartlite device with the driver + * + * @dev: pointer to device structure + * @id: requested id number. Pass -1 for automatic port assignment + * @base: base address of uartlite registers + * @irq: irq number for uartlite + * + * Returns: 0 on success, <0 otherwise + */ +static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) +{ + struct uart_port *port; + int rc; + + /* if id = -1; then scan for a free id and use that */ + if (id < 0) { + for (id = 0; id < ULITE_NR_UARTS; id++) + if (ulite_ports[id].mapbase == 0) + break; + } + if (id < 0 || id >= ULITE_NR_UARTS) { + dev_err(dev, "%s%i too large\n", ULITE_NAME, id); + return -EINVAL; + } + + if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { + dev_err(dev, "cannot assign to %s%i; it is already in use\n", + ULITE_NAME, id); + return -EBUSY; + } + + port = &ulite_ports[id]; + + spin_lock_init(&port->lock); + port->fifosize = 16; + port->regshift = 2; + port->iotype = UPIO_MEM; + port->iobase = 1; /* mark port in use */ + port->mapbase = base; + port->membase = NULL; + port->ops = &ulite_ops; + port->irq = irq; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = dev; + port->type = PORT_UNKNOWN; + port->line = id; + + dev_set_drvdata(dev, port); + + /* Register the port */ + rc = uart_add_one_port(&ulite_uart_driver, port); + if (rc) { + dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); + port->mapbase = 0; + dev_set_drvdata(dev, NULL); + return rc; + } + + return 0; +} + +/** ulite_release: register a uartlite device with the driver + * + * @dev: pointer to device structure + */ +static int __devexit ulite_release(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + int rc = 0; + + if (port) { + rc = uart_remove_one_port(&ulite_uart_driver, port); + dev_set_drvdata(dev, NULL); + port->mapbase = 0; + } + + return rc; +} + +/* --------------------------------------------------------------------- + * Platform bus binding + */ + +static int __devinit ulite_probe(struct platform_device *pdev) +{ + struct resource *res, *res2; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); +} + +static int __devexit ulite_remove(struct platform_device *pdev) +{ + return ulite_release(&pdev->dev); +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:uartlite"); + +static struct platform_driver ulite_platform_driver = { + .probe = ulite_probe, + .remove = __devexit_p(ulite_remove), + .driver = { + .owner = THIS_MODULE, + .name = "uartlite", + }, +}; + +/* --------------------------------------------------------------------- + * OF bus bindings + */ +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) +static int __devinit +ulite_of_probe(struct platform_device *op, const struct of_device_id *match) +{ + struct resource res; + const unsigned int *id; + int irq, rc; + + dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); + + rc = of_address_to_resource(op->dev.of_node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return rc; + } + + irq = irq_of_parse_and_map(op->dev.of_node, 0); + + id = of_get_property(op->dev.of_node, "port-number", NULL); + + return ulite_assign(&op->dev, id ? *id : -1, res.start, irq); +} + +static int __devexit ulite_of_remove(struct platform_device *op) +{ + return ulite_release(&op->dev); +} + +static struct of_platform_driver ulite_of_driver = { + .probe = ulite_of_probe, + .remove = __devexit_p(ulite_of_remove), + .driver = { + .name = "uartlite", + .owner = THIS_MODULE, + .of_match_table = ulite_of_match, + }, +}; + +/* Registration helpers to keep the number of #ifdefs to a minimum */ +static inline int __init ulite_of_register(void) +{ + pr_debug("uartlite: calling of_register_platform_driver()\n"); + return of_register_platform_driver(&ulite_of_driver); +} + +static inline void __exit ulite_of_unregister(void) +{ + of_unregister_platform_driver(&ulite_of_driver); +} +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ +/* Appropriate config not enabled; do nothing helpers */ +static inline int __init ulite_of_register(void) { return 0; } +static inline void __exit ulite_of_unregister(void) { } +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ + +/* --------------------------------------------------------------------- + * Module setup/teardown + */ + +int __init ulite_init(void) +{ + int ret; + + pr_debug("uartlite: calling uart_register_driver()\n"); + ret = uart_register_driver(&ulite_uart_driver); + if (ret) + goto err_uart; + + ret = ulite_of_register(); + if (ret) + goto err_of; + + pr_debug("uartlite: calling platform_driver_register()\n"); + ret = platform_driver_register(&ulite_platform_driver); + if (ret) + goto err_plat; + + return 0; + +err_plat: + ulite_of_unregister(); +err_of: + uart_unregister_driver(&ulite_uart_driver); +err_uart: + printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); + return ret; +} + +void __exit ulite_exit(void) +{ + platform_driver_unregister(&ulite_platform_driver); + ulite_of_unregister(); + uart_unregister_driver(&ulite_uart_driver); +} + +module_init(ulite_init); +module_exit(ulite_exit); + +MODULE_AUTHOR("Peter Korsgaard "); +MODULE_DESCRIPTION("Xilinx uartlite serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c new file mode 100644 index 0000000..3f4848e --- /dev/null +++ b/drivers/tty/serial/ucc_uart.c @@ -0,0 +1,1537 @@ +/* + * Freescale QUICC Engine UART device driver + * + * Author: Timur Tabi + * + * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * This driver adds support for UART devices via Freescale's QUICC Engine + * found on some Freescale SOCs. + * + * If Soft-UART support is needed but not already present, then this driver + * will request and upload the "Soft-UART" microcode upon probe. The + * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" + * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, + * (e.g. "11" for 1.1). + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +/* + * The GUMR flag for Soft UART. This would normally be defined in qe.h, + * but Soft-UART is a hack and we want to keep everything related to it in + * this file. + */ +#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ + +/* + * soft_uart is 1 if we need to use Soft-UART mode + */ +static int soft_uart; +/* + * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. + */ +static int firmware_loaded; + +/* Enable this macro to configure all serial ports in internal loopback + mode */ +/* #define LOOPBACK */ + +/* The major and minor device numbers are defined in + * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE + * UART, we have major number 204 and minor numbers 46 - 49, which are the + * same as for the CPM2. This decision was made because no Freescale part + * has both a CPM and a QE. + */ +#define SERIAL_QE_MAJOR 204 +#define SERIAL_QE_MINOR 46 + +/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ +#define UCC_MAX_UART 4 + +/* The number of buffer descriptors for receiving characters. */ +#define RX_NUM_FIFO 4 + +/* The number of buffer descriptors for transmitting characters. */ +#define TX_NUM_FIFO 4 + +/* The maximum size of the character buffer for a single RX BD. */ +#define RX_BUF_SIZE 32 + +/* The maximum size of the character buffer for a single TX BD. */ +#define TX_BUF_SIZE 32 + +/* + * The number of jiffies to wait after receiving a close command before the + * device is actually closed. This allows the last few characters to be + * sent over the wire. + */ +#define UCC_WAIT_CLOSING 100 + +struct ucc_uart_pram { + struct ucc_slow_pram common; + u8 res1[8]; /* reserved */ + __be16 maxidl; /* Maximum idle chars */ + __be16 idlc; /* temp idle counter */ + __be16 brkcr; /* Break count register */ + __be16 parec; /* receive parity error counter */ + __be16 frmec; /* receive framing error counter */ + __be16 nosec; /* receive noise counter */ + __be16 brkec; /* receive break condition counter */ + __be16 brkln; /* last received break length */ + __be16 uaddr[2]; /* UART address character 1 & 2 */ + __be16 rtemp; /* Temp storage */ + __be16 toseq; /* Transmit out of sequence char */ + __be16 cchars[8]; /* control characters 1-8 */ + __be16 rccm; /* receive control character mask */ + __be16 rccr; /* receive control character register */ + __be16 rlbc; /* receive last break character */ + __be16 res2; /* reserved */ + __be32 res3; /* reserved, should be cleared */ + u8 res4; /* reserved, should be cleared */ + u8 res5[3]; /* reserved, should be cleared */ + __be32 res6; /* reserved, should be cleared */ + __be32 res7; /* reserved, should be cleared */ + __be32 res8; /* reserved, should be cleared */ + __be32 res9; /* reserved, should be cleared */ + __be32 res10; /* reserved, should be cleared */ + __be32 res11; /* reserved, should be cleared */ + __be32 res12; /* reserved, should be cleared */ + __be32 res13; /* reserved, should be cleared */ +/* The rest is for Soft-UART only */ + __be16 supsmr; /* 0x90, Shadow UPSMR */ + __be16 res92; /* 0x92, reserved, initialize to 0 */ + __be32 rx_state; /* 0x94, RX state, initialize to 0 */ + __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ + u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ + u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ + u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ + u8 res14[0xBC - 0x9F]; /* reserved */ + __be32 dump_ptr; /* 0xBC, Dump pointer */ + __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ + u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ + u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ + __be16 tx_state; /* 0xC6, TX state */ + u8 res15[0xD0 - 0xC8]; /* reserved */ + __be32 resD0; /* 0xD0, reserved, initialize to 0 */ + u8 resD4; /* 0xD4, reserved, initialize to 0 */ + __be16 resD5; /* 0xD5, reserved, initialize to 0 */ +} __attribute__ ((packed)); + +/* SUPSMR definitions, for Soft-UART only */ +#define UCC_UART_SUPSMR_SL 0x8000 +#define UCC_UART_SUPSMR_RPM_MASK 0x6000 +#define UCC_UART_SUPSMR_RPM_ODD 0x0000 +#define UCC_UART_SUPSMR_RPM_LOW 0x2000 +#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 +#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 +#define UCC_UART_SUPSMR_PEN 0x1000 +#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 +#define UCC_UART_SUPSMR_TPM_ODD 0x0000 +#define UCC_UART_SUPSMR_TPM_LOW 0x0400 +#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 +#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 +#define UCC_UART_SUPSMR_FRZ 0x0100 +#define UCC_UART_SUPSMR_UM_MASK 0x00c0 +#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 +#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 +#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 +#define UCC_UART_SUPSMR_CL_MASK 0x0030 +#define UCC_UART_SUPSMR_CL_8 0x0030 +#define UCC_UART_SUPSMR_CL_7 0x0020 +#define UCC_UART_SUPSMR_CL_6 0x0010 +#define UCC_UART_SUPSMR_CL_5 0x0000 + +#define UCC_UART_TX_STATE_AHDLC 0x00 +#define UCC_UART_TX_STATE_UART 0x01 +#define UCC_UART_TX_STATE_X1 0x00 +#define UCC_UART_TX_STATE_X16 0x80 + +#define UCC_UART_PRAM_ALIGNMENT 0x100 + +#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD +#define NUM_CONTROL_CHARS 8 + +/* Private per-port data structure */ +struct uart_qe_port { + struct uart_port port; + struct ucc_slow __iomem *uccp; + struct ucc_uart_pram __iomem *uccup; + struct ucc_slow_info us_info; + struct ucc_slow_private *us_private; + struct device_node *np; + unsigned int ucc_num; /* First ucc is 0, not 1 */ + + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + int wait_closing; + u32 flags; + struct qe_bd *rx_bd_base; + struct qe_bd *rx_cur; + struct qe_bd *tx_bd_base; + struct qe_bd *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + void *bd_virt; /* virtual address of the BD buffers */ + dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ + unsigned int bd_size; /* size of BD buffer space */ +}; + +static struct uart_driver ucc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ucc_uart", + .dev_name = "ttyQE", + .major = SERIAL_QE_MAJOR, + .minor = SERIAL_QE_MINOR, + .nr = UCC_MAX_UART, +}; + +/* + * Virtual to physical address translation. + * + * Given the virtual address for a character buffer, this function returns + * the physical (DMA) equivalent. + */ +static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) +{ + if (likely((addr >= qe_port->bd_virt)) && + (addr < (qe_port->bd_virt + qe_port->bd_size))) + return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%p\n", __func__, addr); + BUG(); + return 0; +} + +/* + * Physical to virtual address translation. + * + * Given the physical (DMA) address for a character buffer, this function + * returns the virtual equivalent. + */ +static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) +{ + /* sanity check */ + if (likely((addr >= qe_port->bd_dma_addr) && + (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) + return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%x\n", __func__, addr); + BUG(); + return NULL; +} + +/* + * Return 1 if the QE is done transmitting all buffers for this port + * + * This function scans each BD in sequence. If we find a BD that is not + * ready (READY=1), then we return 0 indicating that the QE is still sending + * data. If we reach the last BD (WRAP=1), then we know we've scanned + * the entire list, and all BDs are done. + */ +static unsigned int qe_uart_tx_empty(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct qe_bd *bdp = qe_port->tx_bd_base; + + while (1) { + if (in_be16(&bdp->status) & BD_SC_READY) + /* This BD is not done, so return "not done" */ + return 0; + + if (in_be16(&bdp->status) & BD_SC_WRAP) + /* + * This BD is done and it's the last one, so return + * "done" + */ + return 1; + + bdp++; + }; +} + +/* + * Set the modem control lines + * + * Although the QE can control the modem control lines (e.g. CTS), we + * don't need that support. This function must exist, however, otherwise + * the kernel will panic. + */ +void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Get the current modem control line status + * + * Although the QE can control the modem control lines (e.g. CTS), this + * driver currently doesn't support that, so we always return Carrier + * Detect, Data Set Ready, and Clear To Send. + */ +static unsigned int qe_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* + * Disable the transmit interrupt. + * + * Although this function is called "stop_tx", it does not actually stop + * transmission of data. Instead, it tells the QE to not generate an + * interrupt when the UCC is finished sending characters. + */ +static void qe_uart_stop_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Transmit as many characters to the HW as possible. + * + * This function will attempt to stuff of all the characters from the + * kernel's transmit buffer into TX BDs. + * + * A return value of non-zero indicates that it successfully stuffed all + * characters from the kernel buffer. + * + * A return value of zero indicates that there are still characters in the + * kernel's buffer that have not been transmitted, but there are no more BDs + * available. This function should be called again after a BD has been made + * available. + */ +static int qe_uart_tx_pump(struct uart_qe_port *qe_port) +{ + struct qe_bd *bdp; + unsigned char *p; + unsigned int count; + struct uart_port *port = &qe_port->port; + struct circ_buf *xmit = &port->state->xmit; + + bdp = qe_port->rx_cur; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + p = qe2cpu_addr(bdp->buf, qe_port); + + *p++ = port->x_char; + out_be16(&bdp->length, 1); + setbits16(&bdp->status, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + qe_port->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + qe_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + while (!(in_be16(&bdp->status) & BD_SC_READY) && + (xmit->tail != xmit->head)) { + count = 0; + p = qe2cpu_addr(bdp->buf, qe_port); + while (count < qe_port->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + + out_be16(&bdp->length, count); + setbits16(&bdp->status, BD_SC_READY); + + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + } + qe_port->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + /* The kernel buffer is empty, so turn off TX interrupts. We + don't need to be told when the QE is finished transmitting + the data. */ + qe_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * Start transmitting data + * + * This function will start transmitting any available data, if the port + * isn't already transmitting data. + */ +static void qe_uart_start_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + /* If we currently are transmitting, then just return */ + if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) + return; + + /* Otherwise, pump the port and start transmission */ + if (qe_uart_tx_pump(qe_port)) + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Stop transmitting data + */ +static void qe_uart_stop_rx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); +} + +/* + * Enable status change interrupts + * + * We don't support status change interrupts, but we need to define this + * function otherwise the kernel will panic. + */ +static void qe_uart_enable_ms(struct uart_port *port) +{ +} + +/* Start or stop sending break signal + * + * This function controls the sending of a break signal. If break_state=1, + * then we start sending a break signal. If break_state=0, then we stop + * sending the break signal. + */ +static void qe_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + if (break_state) + ucc_slow_stop_tx(qe_port->us_private); + else + ucc_slow_restart_tx(qe_port->us_private); +} + +/* ISR helper function for receiving character. + * + * This function is called by the ISR to handling receiving characters + */ +static void qe_uart_int_rx(struct uart_qe_port *qe_port) +{ + int i; + unsigned char ch, *cp; + struct uart_port *port = &qe_port->port; + struct tty_struct *tty = port->state->port.tty; + struct qe_bd *bdp; + u16 status; + unsigned int flg; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = qe_port->rx_cur; + while (1) { + status = in_be16(&bdp->status); + + /* If this one is empty, then we assume we've read them all */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check space in RX buffer */ + i = in_be16(&bdp->length); + + /* If we don't have enough room in RX buffer for the entire BD, + * then we try later, which will be the next RX interrupt. + */ + if (tty_buffer_request_room(tty, i) < i) { + dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); + return; + } + + /* get pointer */ + cp = qe2cpu_addr(bdp->buf, qe_port); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (!i && status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; + +error_return: + tty_insert_flip_char(tty, ch, flg); + + } + + /* This BD is ready to be used again. Clear status. get next */ + clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->rx_bd_base; + else + bdp++; + + } + + /* Write back buffer pointer */ + qe_port->rx_cur = bdp; + + /* Activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + +handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* Overrun does not affect the current character ! */ + if (status & BD_SC_OV) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* Interrupt handler + * + * This interrupt handler is called after a BD is processed. + */ +static irqreturn_t qe_uart_int(int irq, void *data) +{ + struct uart_qe_port *qe_port = (struct uart_qe_port *) data; + struct ucc_slow __iomem *uccp = qe_port->uccp; + u16 events; + + /* Clear the interrupts */ + events = in_be16(&uccp->ucce); + out_be16(&uccp->ucce, events); + + if (events & UCC_UART_UCCE_BRKE) + uart_handle_break(&qe_port->port); + + if (events & UCC_UART_UCCE_RX) + qe_uart_int_rx(qe_port); + + if (events & UCC_UART_UCCE_TX) + qe_uart_tx_pump(qe_port); + + return events ? IRQ_HANDLED : IRQ_NONE; +} + +/* Initialize buffer descriptors + * + * This function initializes all of the RX and TX buffer descriptors. + */ +static void qe_uart_initbd(struct uart_qe_port *qe_port) +{ + int i; + void *bd_virt; + struct qe_bd *bdp; + + /* Set the physical address of the host memory buffers in the buffer + * descriptors, and the virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt; + bdp = qe_port->rx_bd_base; + qe_port->rx_cur = qe_port->rx_bd_base; + for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->rx_fifosize; + bdp++; + } + + /* */ + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt + + L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + qe_port->tx_cur = qe_port->tx_bd_base; + bdp = qe_port->tx_bd_base; + for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->tx_fifosize; + bdp++; + } + + /* Loopback requires the preamble bit to be set on the first TX BD */ +#ifdef LOOPBACK + setbits16(&qe_port->tx_cur->status, BD_SC_P); +#endif + + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); +} + +/* + * Initialize a UCC for UART. + * + * This function configures a given UCC to be used as a UART device. Basic + * UCC initialization is handled in qe_uart_request_port(). This function + * does all the UART-specific stuff. + */ +static void qe_uart_init_ucc(struct uart_qe_port *qe_port) +{ + u32 cecr_subblock; + struct ucc_slow __iomem *uccp = qe_port->uccp; + struct ucc_uart_pram *uccup = qe_port->uccup; + + unsigned int i; + + /* First, disable TX and RX in the UCC */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + /* Program the UCC UART parameter RAM */ + out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_be16(&uccup->common.mrblr, qe_port->rx_fifosize); + out_be16(&uccup->maxidl, 0x10); + out_be16(&uccup->brkcr, 1); + out_be16(&uccup->parec, 0); + out_be16(&uccup->frmec, 0); + out_be16(&uccup->nosec, 0); + out_be16(&uccup->brkec, 0); + out_be16(&uccup->uaddr[0], 0); + out_be16(&uccup->uaddr[1], 0); + out_be16(&uccup->toseq, 0); + for (i = 0; i < 8; i++) + out_be16(&uccup->cchars[i], 0xC000); + out_be16(&uccup->rccm, 0xc0ff); + + /* Configure the GUMR registers for UART */ + if (soft_uart) { + /* Soft-UART requires a 1X multiplier for TX */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); + } else { + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX, + UCC_SLOW_GUMR_H_RFW); + } + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_CDS); +#endif + + /* Disable rx interrupts and clear all pending events. */ + out_be16(&uccp->uccm, 0); + out_be16(&uccp->ucce, 0xffff); + out_be16(&uccp->udsr, 0x7e7e); + + /* Initialize UPSMR */ + out_be16(&uccp->upsmr, 0); + + if (soft_uart) { + out_be16(&uccup->supsmr, 0x30); + out_be16(&uccup->res92, 0); + out_be32(&uccup->rx_state, 0); + out_be32(&uccup->rx_cnt, 0); + out_8(&uccup->rx_bitmark, 0); + out_8(&uccup->rx_length, 10); + out_be32(&uccup->dump_ptr, 0x4000); + out_8(&uccup->rx_temp_dlst_qe, 0); + out_be32(&uccup->rx_frame_rem, 0); + out_8(&uccup->rx_frame_rem_size, 0); + /* Soft-UART requires TX to be 1X */ + out_8(&uccup->tx_mode, + UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1); + out_be16(&uccup->tx_state, 0); + out_8(&uccup->resD4, 0); + out_be16(&uccup->resD5, 0); + + /* Set UART mode. + * Enable receive and transmit. + */ + + /* From the microcode errata: + * 1.GUMR_L register, set mode=0010 (QMC). + * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). + * 3.Set GUMR_H[19:20] (Transparent mode) + * 4.Clear GUMR_H[26] (RFW) + * ... + * 6.Receiver must use 16x over sampling + */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | + UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP | + UCC_SLOW_GUMR_H_CDS); +#endif + + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } else { + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UART, 0); + } +} + +/* + * Initialize the port. + */ +static int qe_uart_startup(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + int ret; + + /* + * If we're using Soft-UART mode, then we need to make sure the + * firmware has been uploaded first. + */ + if (soft_uart && !firmware_loaded) { + dev_err(port->dev, "Soft-UART firmware not uploaded\n"); + return -ENODEV; + } + + qe_uart_initbd(qe_port); + qe_uart_init_ucc(qe_port); + + /* Install interrupt handler. */ + ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", + qe_port); + if (ret) { + dev_err(port->dev, "could not claim IRQ %u\n", port->irq); + return ret; + } + + /* Startup rx-int */ + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); + ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + return 0; +} + +/* + * Shutdown the port. + */ +static void qe_uart_shutdown(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int timeout = 20; + + /* Disable RX and TX */ + + /* Wait for all the BDs marked sent */ + while (!qe_uart_tx_empty(port)) { + if (!--timeout) { + dev_warn(port->dev, "shutdown timeout\n"); + break; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (qe_port->wait_closing) { + /* Wait a bit longer */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(qe_port->wait_closing); + } + + /* Stop uarts */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); + + /* Shut them really down and reinit buffer descriptors */ + ucc_slow_graceful_stop_tx(qe_port->us_private); + qe_uart_initbd(qe_port); + + free_irq(port->irq, qe_port); +} + +/* + * Set the serial port parameters. + */ +static void qe_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int baud; + unsigned long flags; + u16 upsmr = in_be16(&uccp->upsmr); + struct ucc_uart_pram __iomem *uccup = qe_port->uccup; + u16 supsmr = in_be16(&uccup->supsmr); + u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + + /* byte size */ + upsmr &= UCC_UART_UPSMR_CL_MASK; + supsmr &= UCC_UART_SUPSMR_CL_MASK; + + switch (termios->c_cflag & CSIZE) { + case CS5: + upsmr |= UCC_UART_UPSMR_CL_5; + supsmr |= UCC_UART_SUPSMR_CL_5; + char_length += 5; + break; + case CS6: + upsmr |= UCC_UART_UPSMR_CL_6; + supsmr |= UCC_UART_SUPSMR_CL_6; + char_length += 6; + break; + case CS7: + upsmr |= UCC_UART_UPSMR_CL_7; + supsmr |= UCC_UART_SUPSMR_CL_7; + char_length += 7; + break; + default: /* case CS8 */ + upsmr |= UCC_UART_UPSMR_CL_8; + supsmr |= UCC_UART_SUPSMR_CL_8; + char_length += 8; + break; + } + + /* If CSTOPB is set, we want two stop bits */ + if (termios->c_cflag & CSTOPB) { + upsmr |= UCC_UART_UPSMR_SL; + supsmr |= UCC_UART_SUPSMR_SL; + char_length++; /* + SL */ + } + + if (termios->c_cflag & PARENB) { + upsmr |= UCC_UART_UPSMR_PEN; + supsmr |= UCC_UART_SUPSMR_PEN; + char_length++; /* + PEN */ + + if (!(termios->c_cflag & PARODD)) { + upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | + UCC_UART_UPSMR_TPM_MASK); + upsmr |= UCC_UART_UPSMR_RPM_EVEN | + UCC_UART_UPSMR_TPM_EVEN; + supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | + UCC_UART_SUPSMR_TPM_MASK); + supsmr |= UCC_UART_SUPSMR_RPM_EVEN | + UCC_UART_SUPSMR_TPM_EVEN; + } + } + + /* + * Set up parity check flag + */ + port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + baud = uart_get_baud_rate(port, termios, old, 0, 115200); + + /* Do we really need a spinlock here? */ + spin_lock_irqsave(&port->lock, flags); + + out_be16(&uccp->upsmr, upsmr); + if (soft_uart) { + out_be16(&uccup->supsmr, supsmr); + out_8(&uccup->rx_length, char_length); + + /* Soft-UART requires a 1X multiplier for TX */ + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 1); + } else { + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 16); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return a pointer to a string that describes what kind of port this is. + */ +static const char *qe_uart_type(struct uart_port *port) +{ + return "QE"; +} + +/* + * Allocate any memory and I/O resources required by the port. + */ +static int qe_uart_request_port(struct uart_port *port) +{ + int ret; + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_info *us_info = &qe_port->us_info; + struct ucc_slow_private *uccs; + unsigned int rx_size, tx_size; + void *bd_virt; + dma_addr_t bd_dma_addr = 0; + + ret = ucc_slow_init(us_info, &uccs); + if (ret) { + dev_err(port->dev, "could not initialize UCC%u\n", + qe_port->ucc_num); + return ret; + } + + qe_port->us_private = uccs; + qe_port->uccp = uccs->us_regs; + qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; + qe_port->rx_bd_base = uccs->rx_bd; + qe_port->tx_bd_base = uccs->tx_bd; + + /* + * Allocate the transmit and receive data buffers. + */ + + rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); + + bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr, + GFP_KERNEL); + if (!bd_virt) { + dev_err(port->dev, "could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + qe_port->bd_virt = bd_virt; + qe_port->bd_dma_addr = bd_dma_addr; + qe_port->bd_size = rx_size + tx_size; + + qe_port->rx_buf = bd_virt; + qe_port->tx_buf = qe_port->rx_buf + rx_size; + + return 0; +} + +/* + * Configure the port. + * + * We say we're a CPM-type port because that's mostly true. Once the device + * is configured, this driver operates almost identically to the CPM serial + * driver. + */ +static void qe_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + qe_uart_request_port(port); + } +} + +/* + * Release any memory and I/O resources that were allocated in + * qe_uart_request_port(). + */ +static void qe_uart_release_port(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_private *uccs = qe_port->us_private; + + dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt, + qe_port->bd_dma_addr); + + ucc_slow_free(uccs); +} + +/* + * Verify that the data in serial_struct is suitable for this device. + */ +static int qe_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= nr_irqs) + return -EINVAL; + + if (ser->baud_base < 9600) + return -EINVAL; + + return 0; +} +/* UART operations + * + * Details on these functions can be found in Documentation/serial/driver + */ +static struct uart_ops qe_uart_pops = { + .tx_empty = qe_uart_tx_empty, + .set_mctrl = qe_uart_set_mctrl, + .get_mctrl = qe_uart_get_mctrl, + .stop_tx = qe_uart_stop_tx, + .start_tx = qe_uart_start_tx, + .stop_rx = qe_uart_stop_rx, + .enable_ms = qe_uart_enable_ms, + .break_ctl = qe_uart_break_ctl, + .startup = qe_uart_startup, + .shutdown = qe_uart_shutdown, + .set_termios = qe_uart_set_termios, + .type = qe_uart_type, + .release_port = qe_uart_release_port, + .request_port = qe_uart_request_port, + .config_port = qe_uart_config_port, + .verify_port = qe_uart_verify_port, +}; + +/* + * Obtain the SOC model number and revision level + * + * This function parses the device tree to obtain the SOC model. It then + * reads the SVR register to the revision. + * + * The device tree stores the SOC model two different ways. + * + * The new way is: + * + * cpu@0 { + * compatible = "PowerPC,8323"; + * device_type = "cpu"; + * ... + * + * + * The old way is: + * PowerPC,8323@0 { + * device_type = "cpu"; + * ... + * + * This code first checks the new way, and then the old way. + */ +static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) +{ + struct device_node *np; + const char *soc_string; + unsigned int svr; + unsigned int soc; + + /* Find the CPU node */ + np = of_find_node_by_type(NULL, "cpu"); + if (!np) + return 0; + /* Find the compatible property */ + soc_string = of_get_property(np, "compatible", NULL); + if (!soc_string) + /* No compatible property, so try the name. */ + soc_string = np->name; + + /* Extract the SOC number from the "PowerPC," string */ + if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) + return 0; + + /* Get the revision from the SVR */ + svr = mfspr(SPRN_SVR); + *rev_h = (svr >> 4) & 0xf; + *rev_l = svr & 0xf; + + return soc; +} + +/* + * requst_firmware_nowait() callback function + * + * This function is called by the kernel when a firmware is made available, + * or if it times out waiting for the firmware. + */ +static void uart_firmware_cont(const struct firmware *fw, void *context) +{ + struct qe_firmware *firmware; + struct device *dev = context; + int ret; + + if (!fw) { + dev_err(dev, "firmware not found\n"); + return; + } + + firmware = (struct qe_firmware *) fw->data; + + if (firmware->header.length != fw->size) { + dev_err(dev, "invalid firmware\n"); + goto out; + } + + ret = qe_upload_firmware(firmware); + if (ret) { + dev_err(dev, "could not load firmware\n"); + goto out; + } + + firmware_loaded = 1; + out: + release_firmware(fw); +} + +static int ucc_uart_probe(struct platform_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->dev.of_node; + const unsigned int *iprop; /* Integer OF properties */ + const char *sprop; /* String OF properties */ + struct uart_qe_port *qe_port = NULL; + struct resource res; + int ret; + + /* + * Determine if we need Soft-UART mode + */ + if (of_find_property(np, "soft-uart", NULL)) { + dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); + soft_uart = 1; + } + + /* + * If we are using Soft-UART, determine if we need to upload the + * firmware, too. + */ + if (soft_uart) { + struct qe_firmware_info *qe_fw_info; + + qe_fw_info = qe_get_firmware_info(); + + /* Check if the firmware has been uploaded. */ + if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { + firmware_loaded = 1; + } else { + char filename[32]; + unsigned int soc; + unsigned int rev_h; + unsigned int rev_l; + + soc = soc_info(&rev_h, &rev_l); + if (!soc) { + dev_err(&ofdev->dev, "unknown CPU model\n"); + return -ENXIO; + } + sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", + soc, rev_h, rev_l); + + dev_info(&ofdev->dev, "waiting for firmware %s\n", + filename); + + /* + * We call request_firmware_nowait instead of + * request_firmware so that the driver can load and + * initialize the ports without holding up the rest of + * the kernel. If hotplug support is enabled in the + * kernel, then we use it. + */ + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, filename, &ofdev->dev, + GFP_KERNEL, &ofdev->dev, uart_firmware_cont); + if (ret) { + dev_err(&ofdev->dev, + "could not load firmware %s\n", + filename); + return ret; + } + } + } + + qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); + if (!qe_port) { + dev_err(&ofdev->dev, "can't allocate QE port structure\n"); + return -ENOMEM; + } + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); + kfree(qe_port); + return ret; + } + if (!res.start) { + dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.mapbase = res.start; + + /* Get the UCC number (device ID) */ + /* UCCs are numbered 1-7 */ + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + iprop = of_get_property(np, "device-id", NULL); + if (!iprop) { + kfree(qe_port); + dev_err(&ofdev->dev, "UCC is unspecified in " + "device tree\n"); + return -EINVAL; + } + } + + if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) { + dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop); + kfree(qe_port); + return -ENODEV; + } + qe_port->ucc_num = *iprop - 1; + + /* + * In the future, we should not require the BRG to be specified in the + * device tree. If no clock-source is specified, then just pick a BRG + * to use. This requires a new QE library function that manages BRG + * assignments. + */ + + sprop = of_get_property(np, "rx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + + qe_port->us_info.rx_clock = qe_clock_source(sprop); + if ((qe_port->us_info.rx_clock < QE_BRG1) || + (qe_port->us_info.rx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + +#ifdef LOOPBACK + /* In internal loopback mode, TX and RX must use the same clock */ + qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; +#else + sprop = of_get_property(np, "tx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + qe_port->us_info.tx_clock = qe_clock_source(sprop); +#endif + if ((qe_port->us_info.tx_clock < QE_BRG1) || + (qe_port->us_info.tx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + + /* Get the port number, numbered 0-3 */ + iprop = of_get_property(np, "port-number", NULL); + if (!iprop) { + dev_err(&ofdev->dev, "missing port-number in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.line = *iprop; + if (qe_port->port.line >= UCC_MAX_UART) { + dev_err(&ofdev->dev, "port-number must be 0-%u\n", + UCC_MAX_UART - 1); + kfree(qe_port); + return -EINVAL; + } + + qe_port->port.irq = irq_of_parse_and_map(np, 0); + if (qe_port->port.irq == NO_IRQ) { + dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", + qe_port->ucc_num + 1); + kfree(qe_port); + return -EINVAL; + } + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_type(NULL, "qe"); + if (!np) { + dev_err(&ofdev->dev, "could not find 'qe' node\n"); + kfree(qe_port); + return -EINVAL; + } + } + + iprop = of_get_property(np, "brg-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing brg-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + + if (*iprop) + qe_port->port.uartclk = *iprop; + else { + /* + * Older versions of U-Boot do not initialize the brg-frequency + * property, so in this case we assume the BRG frequency is + * half the QE bus frequency. + */ + iprop = of_get_property(np, "bus-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + if (*iprop) + qe_port->port.uartclk = *iprop / 2; + else { + dev_err(&ofdev->dev, + "invalid QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + } + + spin_lock_init(&qe_port->port.lock); + qe_port->np = np; + qe_port->port.dev = &ofdev->dev; + qe_port->port.ops = &qe_uart_pops; + qe_port->port.iotype = UPIO_MEM; + + qe_port->tx_nrfifos = TX_NUM_FIFO; + qe_port->tx_fifosize = TX_BUF_SIZE; + qe_port->rx_nrfifos = RX_NUM_FIFO; + qe_port->rx_fifosize = RX_BUF_SIZE; + + qe_port->wait_closing = UCC_WAIT_CLOSING; + qe_port->port.fifosize = 512; + qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + + qe_port->us_info.ucc_num = qe_port->ucc_num; + qe_port->us_info.regs = (phys_addr_t) res.start; + qe_port->us_info.irq = qe_port->port.irq; + + qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; + qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; + + /* Make sure ucc_slow_init() initializes both TX and RX */ + qe_port->us_info.init_tx = 1; + qe_port->us_info.init_rx = 1; + + /* Add the port to the uart sub-system. This will cause + * qe_uart_config_port() to be called, so the us_info structure must + * be initialized. + */ + ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); + if (ret) { + dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", + qe_port->port.line); + kfree(qe_port); + return ret; + } + + dev_set_drvdata(&ofdev->dev, qe_port); + + dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", + qe_port->ucc_num + 1, qe_port->port.line); + + /* Display the mknod command for this device */ + dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", + qe_port->port.line, SERIAL_QE_MAJOR, + SERIAL_QE_MINOR + qe_port->port.line); + + return 0; +} + +static int ucc_uart_remove(struct platform_device *ofdev) +{ + struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev); + + dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); + + uart_remove_one_port(&ucc_uart_driver, &qe_port->port); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(qe_port); + + return 0; +} + +static struct of_device_id ucc_uart_match[] = { + { + .type = "serial", + .compatible = "ucc_uart", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ucc_uart_match); + +static struct of_platform_driver ucc_uart_of_driver = { + .driver = { + .name = "ucc_uart", + .owner = THIS_MODULE, + .of_match_table = ucc_uart_match, + }, + .probe = ucc_uart_probe, + .remove = ucc_uart_remove, +}; + +static int __init ucc_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); +#ifdef LOOPBACK + printk(KERN_INFO "ucc-uart: Using loopback mode\n"); +#endif + + ret = uart_register_driver(&ucc_uart_driver); + if (ret) { + printk(KERN_ERR "ucc-uart: could not register UART driver\n"); + return ret; + } + + ret = of_register_platform_driver(&ucc_uart_of_driver); + if (ret) + printk(KERN_ERR + "ucc-uart: could not register platform driver\n"); + + return ret; +} + +static void __exit ucc_uart_exit(void) +{ + printk(KERN_INFO + "Freescale QUICC Engine UART device driver unloading\n"); + + of_unregister_platform_driver(&ucc_uart_of_driver); + uart_unregister_driver(&ucc_uart_driver); +} + +module_init(ucc_uart_init); +module_exit(ucc_uart_exit); + +MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); +MODULE_AUTHOR("Timur Tabi "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); + diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c new file mode 100644 index 0000000..3beb6ab --- /dev/null +++ b/drivers/tty/serial/vr41xx_siu.c @@ -0,0 +1,978 @@ +/* + * Driver for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2004-2008 Yoichi Yuasa + * + * Based on drivers/serial/8250.c, by Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SIU_BAUD_BASE 1152000 +#define SIU_MAJOR 204 +#define SIU_MINOR_BASE 82 + +#define RX_MAX_COUNT 256 +#define TX_MAX_COUNT 15 + +#define SIUIRSEL 0x08 + #define TMICMODE 0x20 + #define TMICTX 0x10 + #define IRMSEL 0x0c + #define IRMSEL_HP 0x08 + #define IRMSEL_TEMIC 0x04 + #define IRMSEL_SHARP 0x00 + #define IRUSESEL 0x02 + #define SIRSEL 0x01 + +static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { + [0 ... SIU_PORTS_MAX-1] = { + .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), + .irq = -1, + }, +}; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +static uint8_t lsr_break_flag[SIU_PORTS_MAX]; +#endif + +#define siu_read(port, offset) readb((port)->membase + (offset)) +#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) + +void vr41xx_select_siu_interface(siu_interface_t interface) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (interface == SIU_INTERFACE_IRDA) + irsel |= SIRSEL; + else + irsel &= ~SIRSEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); + +void vr41xx_use_irda(irda_use_t use) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (use == FIR_USE_IRDA) + irsel |= IRUSESEL; + else + irsel &= ~IRUSESEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_use_irda); + +void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + irsel &= ~(IRMSEL | TMICTX | TMICMODE); + switch (module) { + case SHARP_IRDA: + irsel |= IRMSEL_SHARP; + break; + case TEMIC_IRDA: + irsel |= IRMSEL_TEMIC | TMICMODE; + if (speed == IRDA_TX_4MBPS) + irsel |= TMICTX; + break; + case HP_IRDA: + irsel |= IRMSEL_HP; + break; + default: + break; + } + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); + +static inline void siu_clear_fifo(struct uart_port *port) +{ + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + siu_write(port, UART_FCR, 0); +} + +static inline unsigned long siu_port_size(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return 11UL; + case PORT_VR41XX_DSIU: + return 8UL; + } + + return 0; +} + +static inline unsigned int siu_check_type(struct uart_port *port) +{ + if (port->line == 0) + return PORT_VR41XX_SIU; + if (port->line == 1 && port->irq != -1) + return PORT_VR41XX_DSIU; + + return PORT_UNKNOWN; +} + +static inline const char *siu_type_name(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return "SIU"; + case PORT_VR41XX_DSIU: + return "DSIU"; + } + + return NULL; +} + +static unsigned int siu_tx_empty(struct uart_port *port) +{ + uint8_t lsr; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_TEMT) + return TIOCSER_TEMT; + + return 0; +} + +static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + uint8_t mcr = 0; + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + siu_write(port, UART_MCR, mcr); +} + +static unsigned int siu_get_mctrl(struct uart_port *port) +{ + uint8_t msr; + unsigned int mctrl = 0; + + msr = siu_read(port, UART_MSR); + if (msr & UART_MSR_DCD) + mctrl |= TIOCM_CAR; + if (msr & UART_MSR_RI) + mctrl |= TIOCM_RNG; + if (msr & UART_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & UART_MSR_CTS) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void siu_stop_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_start_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_stop_rx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_RLSI; + siu_write(port, UART_IER, ier); + + port->read_status_mask &= ~UART_LSR_DR; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_enable_ms(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + uint8_t lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + if (ctl == -1) + lcr |= UART_LCR_SBC; + else + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void receive_chars(struct uart_port *port, uint8_t *status) +{ + struct tty_struct *tty; + uint8_t lsr, ch; + char flag; + int max_count = RX_MAX_COUNT; + + tty = port->state->port.tty; + lsr = *status; + + do { + ch = siu_read(port, UART_RX); + port->icount.rx++; + flag = TTY_NORMAL; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + lsr |= lsr_break_flag[port->line]; + lsr_break_flag[port->line] = 0; +#endif + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE))) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + + if (uart_handle_break(port)) + goto ignore_char; + } + + if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_PE) + port->icount.parity++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); + + ignore_char: + lsr = siu_read(port, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(tty); + + *status = lsr; +} + +static inline void check_modem_status(struct uart_port *port) +{ + uint8_t msr; + + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_ANY_DELTA) == 0) + return; + if (msr & UART_MSR_DDCD) + uart_handle_dcd_change(port, msr & UART_MSR_DCD); + if (msr & UART_MSR_TERI) + port->icount.rng++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DCTS) + uart_handle_cts_change(port, msr & UART_MSR_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static inline void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + int max_count = TX_MAX_COUNT; + + xmit = &port->state->xmit; + + if (port->x_char) { + siu_write(port, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + siu_stop_tx(port); + return; + } + + do { + siu_write(port, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (max_count-- > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + siu_stop_tx(port); +} + +static irqreturn_t siu_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + uint8_t iir, lsr; + + port = (struct uart_port *)dev_id; + + iir = siu_read(port, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(port, &lsr); + + check_modem_status(port); + + if (lsr & UART_LSR_THRE) + transmit_chars(port); + + return IRQ_HANDLED; +} + +static int siu_startup(struct uart_port *port) +{ + int retval; + + if (port->membase == NULL) + return -ENODEV; + + siu_clear_fifo(port); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + if (siu_read(port, UART_LSR) == 0xff) + return -ENODEV; + + retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); + if (retval) + return retval; + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_enable_dsiuint(DSIUINT_ALL); + + siu_write(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irq(&port->lock); + siu_set_mctrl(port, port->mctrl); + spin_unlock_irq(&port->lock); + + siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + return 0; +} + +static void siu_shutdown(struct uart_port *port) +{ + unsigned long flags; + uint8_t lcr; + + siu_write(port, UART_IER, 0); + + spin_lock_irqsave(&port->lock, flags); + + port->mctrl &= ~TIOCM_OUT2; + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + siu_clear_fifo(port); + + (void)siu_read(port, UART_RX); + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_disable_dsiuint(DSIUINT_ALL); + + free_irq(port->irq, port); +} + +static void siu_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + tcflag_t c_cflag, c_iflag; + uint8_t lcr, fcr, ier; + unsigned int baud, quot; + unsigned long flags; + + c_cflag = new->c_cflag; + switch (c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + if ((c_cflag & PARODD) != PARODD) + lcr |= UART_LCR_EPAR; + if (c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, c_cflag, baud); + + c_iflag = new->c_iflag; + + port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; + if (c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + port->ignore_status_mask = 0; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + if ((c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(port, c_cflag)) + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); + + siu_write(port, UART_DLL, (uint8_t)quot); + siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); + + siu_write(port, UART_LCR, lcr); + + siu_write(port, UART_FCR, fcr); + + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) +{ + switch (state) { + case 0: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_supply_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_supply_clock(DSIU_CLOCK); + break; + } + break; + case 3: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_mask_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_mask_clock(DSIU_CLOCK); + break; + } + break; + } +} + +static const char *siu_type(struct uart_port *port) +{ + return siu_type_name(port); +} + +static void siu_release_port(struct uart_port *port) +{ + unsigned long size; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + size = siu_port_size(port); + release_mem_region(port->mapbase, size); +} + +static int siu_request_port(struct uart_port *port) +{ + unsigned long size; + struct resource *res; + + size = siu_port_size(port); + res = request_mem_region(port->mapbase, size, siu_type_name(port)); + if (res == NULL) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_resource(res); + return -ENOMEM; + } + } + + return 0; +} + +static void siu_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = siu_check_type(port); + (void)siu_request_port(port); + } +} + +static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) +{ + if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) + return -EINVAL; + if (port->irq != serial->irq) + return -EINVAL; + if (port->iotype != serial->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serial->iomem_base) + return -EINVAL; + + return 0; +} + +static struct uart_ops siu_uart_ops = { + .tx_empty = siu_tx_empty, + .set_mctrl = siu_set_mctrl, + .get_mctrl = siu_get_mctrl, + .stop_tx = siu_stop_tx, + .start_tx = siu_start_tx, + .stop_rx = siu_stop_rx, + .enable_ms = siu_enable_ms, + .break_ctl = siu_break_ctl, + .startup = siu_startup, + .shutdown = siu_shutdown, + .set_termios = siu_set_termios, + .pm = siu_pm, + .type = siu_type, + .release_port = siu_release_port, + .request_port = siu_request_port, + .config_port = siu_config_port, + .verify_port = siu_verify_port, +}; + +static int siu_init_ports(struct platform_device *pdev) +{ + struct uart_port *port; + struct resource *res; + int *type = pdev->dev.platform_data; + int i; + + if (!type) + return 0; + + port = siu_uart_ports; + for (i = 0; i < SIU_PORTS_MAX; i++) { + port->type = type[i]; + if (port->type == PORT_UNKNOWN) + continue; + port->irq = platform_get_irq(pdev, i); + port->uartclk = SIU_BAUD_BASE * 16; + port->fifosize = 16; + port->regshift = 0; + port->iotype = UPIO_MEM; + port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + port->line = i; + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + port->mapbase = res->start; + port++; + } + + return i; +} + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void wait_for_xmitr(struct uart_port *port) +{ + int timeout = 10000; + uint8_t lsr, msr; + + do { + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_BI) + lsr_break_flag[port->line] = UART_LSR_BI; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + break; + } while (timeout-- > 0); + + if (port->flags & UPF_CONS_FLOW) { + timeout = 1000000; + + do { + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_CTS) != 0) + break; + } while (timeout-- > 0); + } +} + +static void siu_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + siu_write(port, UART_TX, ch); +} + +static void siu_console_write(struct console *con, const char *s, unsigned count) +{ + struct uart_port *port; + uint8_t ier; + + port = &siu_uart_ports[con->index]; + + ier = siu_read(port, UART_IER); + siu_write(port, UART_IER, 0); + + uart_console_write(port, s, count, siu_console_putchar); + + wait_for_xmitr(port); + siu_write(port, UART_IER, ier); +} + +static int __init siu_console_setup(struct console *con, char *options) +{ + struct uart_port *port; + int baud = 9600; + int parity = 'n'; + int bits = 8; + int flow = 'n'; + + if (con->index >= SIU_PORTS_MAX) + con->index = 0; + + port = &siu_uart_ports[con->index]; + if (port->membase == NULL) { + if (port->mapbase == 0) + return -ENODEV; + port->membase = ioremap(port->mapbase, siu_port_size(port)); + } + + if (port->type == PORT_VR41XX_SIU) + vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); + + if (options != NULL) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver siu_uart_driver; + +static struct console siu_console = { + .name = "ttyVR", + .write = siu_console_write, + .device = uart_console_device, + .setup = siu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &siu_uart_driver, +}; + +static int __devinit siu_console_init(void) +{ + struct uart_port *port; + int i; + + for (i = 0; i < SIU_PORTS_MAX; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + } + + register_console(&siu_console); + + return 0; +} + +console_initcall(siu_console_init); + +void __init vr41xx_siu_early_setup(struct uart_port *port) +{ + if (port->type == PORT_UNKNOWN) + return; + + siu_uart_ports[port->line].line = port->line; + siu_uart_ports[port->line].type = port->type; + siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; + siu_uart_ports[port->line].mapbase = port->mapbase; + siu_uart_ports[port->line].mapbase = port->mapbase; + siu_uart_ports[port->line].ops = &siu_uart_ops; +} + +#define SERIAL_VR41XX_CONSOLE &siu_console +#else +#define SERIAL_VR41XX_CONSOLE NULL +#endif + +static struct uart_driver siu_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "SIU", + .dev_name = "ttyVR", + .major = SIU_MAJOR, + .minor = SIU_MINOR_BASE, + .cons = SERIAL_VR41XX_CONSOLE, +}; + +static int __devinit siu_probe(struct platform_device *dev) +{ + struct uart_port *port; + int num, i, retval; + + num = siu_init_ports(dev); + if (num <= 0) + return -ENODEV; + + siu_uart_driver.nr = num; + retval = uart_register_driver(&siu_uart_driver); + if (retval) + return retval; + + for (i = 0; i < num; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + port->dev = &dev->dev; + + retval = uart_add_one_port(&siu_uart_driver, port); + if (retval < 0) { + port->dev = NULL; + break; + } + } + + if (i == 0 && retval < 0) { + uart_unregister_driver(&siu_uart_driver); + return retval; + } + + return 0; +} + +static int __devexit siu_remove(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if (port->dev == &dev->dev) { + uart_remove_one_port(&siu_uart_driver, port); + port->dev = NULL; + } + } + + uart_unregister_driver(&siu_uart_driver); + + return 0; +} + +static int siu_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_suspend_port(&siu_uart_driver, port); + + } + + return 0; +} + +static int siu_resume(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_resume_port(&siu_uart_driver, port); + } + + return 0; +} + +static struct platform_driver siu_device_driver = { + .probe = siu_probe, + .remove = __devexit_p(siu_remove), + .suspend = siu_suspend, + .resume = siu_resume, + .driver = { + .name = "SIU", + .owner = THIS_MODULE, + }, +}; + +static int __init vr41xx_siu_init(void) +{ + return platform_driver_register(&siu_device_driver); +} + +static void __exit vr41xx_siu_exit(void) +{ + platform_driver_unregister(&siu_device_driver); +} + +module_init(vr41xx_siu_init); +module_exit(vr41xx_siu_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SIU"); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c new file mode 100644 index 0000000..322bf56 --- /dev/null +++ b/drivers/tty/serial/vt8500_serial.c @@ -0,0 +1,648 @@ +/* + * drivers/serial/vt8500_serial.c + * + * Copyright (C) 2010 Alexey Charkov + * + * Based on msm_serial.c, which is: + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +# define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * UART Register offsets + */ + +#define VT8500_URTDR 0x0000 /* Transmit data */ +#define VT8500_URRDR 0x0004 /* Receive data */ +#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ +#define VT8500_URLCR 0x000C /* Line control */ +#define VT8500_URICR 0x0010 /* IrDA control */ +#define VT8500_URIER 0x0014 /* Interrupt enable */ +#define VT8500_URISR 0x0018 /* Interrupt status */ +#define VT8500_URUSR 0x001c /* UART status */ +#define VT8500_URFCR 0x0020 /* FIFO control */ +#define VT8500_URFIDX 0x0024 /* FIFO index */ +#define VT8500_URBKR 0x0028 /* Break signal count */ +#define VT8500_URTOD 0x002c /* Time out divisor */ +#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ +#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ + +/* + * Interrupt enable and status bits + */ + +#define TXDE (1 << 0) /* Tx Data empty */ +#define RXDF (1 << 1) /* Rx Data full */ +#define TXFAE (1 << 2) /* Tx FIFO almost empty */ +#define TXFE (1 << 3) /* Tx FIFO empty */ +#define RXFAF (1 << 4) /* Rx FIFO almost full */ +#define RXFF (1 << 5) /* Rx FIFO full */ +#define TXUDR (1 << 6) /* Tx underrun */ +#define RXOVER (1 << 7) /* Rx overrun */ +#define PER (1 << 8) /* Parity error */ +#define FER (1 << 9) /* Frame error */ +#define TCTS (1 << 10) /* Toggle of CTS */ +#define RXTOUT (1 << 11) /* Rx timeout */ +#define BKDONE (1 << 12) /* Break signal done */ +#define ERR (1 << 13) /* AHB error response */ + +#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) +#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) + +struct vt8500_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + unsigned int ier; +}; + +static inline void vt8500_write(struct uart_port *port, unsigned int val, + unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static void vt8500_stop_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_stop_rx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~RX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_enable_ms(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier |= TCTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + if (!tty) { + /* Discard data: no tty available */ + int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8; + u16 ch; + while (count--) + ch = readw(port->membase + VT8500_RXFIFO); + return; + } + + /* + * Handle overrun + */ + if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* and now the main RX loop */ + while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { + unsigned int c; + char flag = TTY_NORMAL; + + c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; + + /* Mask conditions we're ignorning. */ + c &= ~port->read_status_mask; + + if (c & FER) { + port->icount.frame++; + flag = TTY_FRAME; + } else if (c & PER) { + port->icount.parity++; + flag = TTY_PARITY; + } + port->icount.rx++; + + if (!uart_handle_sysrq_char(port, c)) + tty_insert_flip_char(tty, c, flag); + } + + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writeb(port->x_char, port->membase + VT8500_TXFIFO); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + vt8500_stop_tx(port); + return; + } + + while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { + if (uart_circ_empty(xmit)) + break; + + writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + vt8500_stop_tx(port); +} + +static void vt8500_start_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); + handle_tx(port); + vt8500_port->ier |= TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_delta_cts(struct uart_port *port) +{ + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t vt8500_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long isr; + + spin_lock(&port->lock); + isr = vt8500_read(port, VT8500_URISR); + + /* Acknowledge active status bits */ + vt8500_write(port, isr, VT8500_URISR); + + if (isr & RX_FIFO_INTS) + handle_rx(port); + if (isr & TX_FIFO_INTS) + handle_tx(port); + if (isr & TCTS) + handle_delta_cts(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int vt8500_tx_empty(struct uart_port *port) +{ + return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? + TIOCSER_TEMT : 0; +} + +static unsigned int vt8500_get_mctrl(struct uart_port *port) +{ + unsigned int usr; + + usr = vt8500_read(port, VT8500_URUSR); + if (usr & (1 << 4)) + return TIOCM_CTS; + else + return 0; +} + +static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void vt8500_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9), + VT8500_URLCR); +} + +static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + unsigned long div; + unsigned int loops = 1000; + + div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff); + + if (unlikely((baud < 900) || (baud > 921600))) + div |= 7; + else + div |= (921600 / baud) - 1; + + while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) + cpu_relax(); + vt8500_write(port, div, VT8500_URDIV); + + return baud; +} + +static int vt8500_startup(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + int ret; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "vt8500_serial%d", port->line); + + ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, + vt8500_port->name, port); + if (unlikely(ret)) + return ret; + + vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ + + return 0; +} + +static void vt8500_shutdown(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + + vt8500_port->ier = 0; + + /* disable interrupts and FIFOs */ + vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); + vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); + free_irq(port->irq, port); +} + +static void vt8500_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + unsigned long flags; + unsigned int baud, lcr; + unsigned int loops = 1000; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 900, 921600); + baud = vt8500_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); + lcr &= ~((1 << 5) | (1 << 4)); + if (termios->c_cflag & PARENB) { + lcr |= (1 << 4); + termios->c_cflag &= ~CMSPAR; + if (termios->c_cflag & PARODD) + lcr |= (1 << 5); + } + + /* calculate bits per char */ + lcr &= ~(1 << 2); + switch (termios->c_cflag & CSIZE) { + case CS7: + break; + case CS8: + default: + lcr |= (1 << 2); + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* calculate stop bits */ + lcr &= ~(1 << 3); + if (termios->c_cflag & CSTOPB) + lcr |= (1 << 3); + + /* set parity, bits per char, and stop bit */ + vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->read_status_mask = FER | PER; + + uart_update_timeout(port, termios->c_cflag, baud); + + /* Reset FIFOs */ + vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); + while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) + && --loops) + cpu_relax(); + + /* Every possible FIFO-related interrupt */ + vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; + + /* + * CTS flow control + */ + if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) + vt8500_port->ier |= TCTS; + + vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); + vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *vt8500_type(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + return vt8500_port->name; +} + +static void vt8500_release_port(struct uart_port *port) +{ +} + +static int vt8500_request_port(struct uart_port *port) +{ + return 0; +} + +static void vt8500_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_VT8500; +} + +static int vt8500_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static struct vt8500_port *vt8500_uart_ports[4]; +static struct uart_driver vt8500_uart_driver; + +#ifdef CONFIG_SERIAL_VT8500_CONSOLE + +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = vt8500_read(port, VT8500_URFIDX); + + if (--tmout == 0) + break; + udelay(1); + } while (status & 0x10); +} + +static void vt8500_console_putchar(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + writeb(c, port->membase + VT8500_TXFIFO); +} + +static void vt8500_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; + unsigned long ier; + + BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); + + ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); + vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); + + uart_console_write(&vt8500_port->uart, s, count, + vt8500_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and switch back to FIFO + */ + wait_for_xmitr(&vt8500_port->uart); + vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); +} + +static int __init vt8500_console_setup(struct console *co, char *options) +{ + struct vt8500_port *vt8500_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) + return -ENXIO; + + vt8500_port = vt8500_uart_ports[co->index]; + + if (!vt8500_port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&vt8500_port->uart, + co, baud, parity, bits, flow); +} + +static struct console vt8500_console = { + .name = "ttyWMT", + .write = vt8500_console_write, + .device = uart_console_device, + .setup = vt8500_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &vt8500_uart_driver, +}; + +#define VT8500_CONSOLE (&vt8500_console) + +#else +#define VT8500_CONSOLE NULL +#endif + +static struct uart_ops vt8500_uart_pops = { + .tx_empty = vt8500_tx_empty, + .set_mctrl = vt8500_set_mctrl, + .get_mctrl = vt8500_get_mctrl, + .stop_tx = vt8500_stop_tx, + .start_tx = vt8500_start_tx, + .stop_rx = vt8500_stop_rx, + .enable_ms = vt8500_enable_ms, + .break_ctl = vt8500_break_ctl, + .startup = vt8500_startup, + .shutdown = vt8500_shutdown, + .set_termios = vt8500_set_termios, + .type = vt8500_type, + .release_port = vt8500_release_port, + .request_port = vt8500_request_port, + .config_port = vt8500_config_port, + .verify_port = vt8500_verify_port, +}; + +static struct uart_driver vt8500_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "vt8500_serial", + .dev_name = "ttyWMT", + .nr = 6, + .cons = VT8500_CONSOLE, +}; + +static int __init vt8500_serial_probe(struct platform_device *pdev) +{ + struct vt8500_port *vt8500_port; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); + if (!vt8500_port) + return -ENOMEM; + + vt8500_port->uart.type = PORT_VT8500; + vt8500_port->uart.iotype = UPIO_MEM; + vt8500_port->uart.mapbase = mmres->start; + vt8500_port->uart.irq = irqres->start; + vt8500_port->uart.fifosize = 16; + vt8500_port->uart.ops = &vt8500_uart_pops; + vt8500_port->uart.line = pdev->id; + vt8500_port->uart.dev = &pdev->dev; + vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + vt8500_port->uart.uartclk = 24000000; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "VT8500 UART%d", pdev->id); + + vt8500_port->uart.membase = ioremap(mmres->start, + mmres->end - mmres->start + 1); + if (!vt8500_port->uart.membase) { + ret = -ENOMEM; + goto err; + } + + vt8500_uart_ports[pdev->id] = vt8500_port; + + uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); + + platform_set_drvdata(pdev, vt8500_port); + + return 0; + +err: + kfree(vt8500_port); + return ret; +} + +static int __devexit vt8500_serial_remove(struct platform_device *pdev) +{ + struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); + kfree(vt8500_port); + + return 0; +} + +static struct platform_driver vt8500_platform_driver = { + .probe = vt8500_serial_probe, + .remove = vt8500_serial_remove, + .driver = { + .name = "vt8500_serial", + .owner = THIS_MODULE, + }, +}; + +static int __init vt8500_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&vt8500_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_register(&vt8500_platform_driver); + + if (unlikely(ret)) + uart_unregister_driver(&vt8500_uart_driver); + + return ret; +} + +static void __exit vt8500_serial_exit(void) +{ +#ifdef CONFIG_SERIAL_VT8500_CONSOLE + unregister_console(&vt8500_console); +#endif + platform_driver_unregister(&vt8500_platform_driver); + uart_unregister_driver(&vt8500_uart_driver); +} + +module_init(vt8500_serial_init); +module_exit(vt8500_serial_exit); + +MODULE_AUTHOR("Alexey Charkov "); +MODULE_DESCRIPTION("Driver for vt8500 serial device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c new file mode 100644 index 0000000..1a7fd3e --- /dev/null +++ b/drivers/tty/serial/zs.c @@ -0,0 +1,1304 @@ +/* + * zs.c: Serial port driver for IOASIC DECstations. + * + * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. + * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. + * + * DECstation changes + * Copyright (C) 1998-2000 Harald Koerfgen + * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki + * + * For the rest of the code the original Copyright applies: + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * + * Note: for IOASIC systems the wiring is as follows: + * + * mouse/keyboard: + * DIN-7 MJ-4 signal SCC + * 2 1 TxD <- A.TxD + * 3 4 RxD -> A.RxD + * + * EIA-232/EIA-423: + * DB-25 MMJ-6 signal SCC + * 2 2 TxD <- B.TxD + * 3 5 RxD -> B.RxD + * 4 RTS <- ~A.RTS + * 5 CTS -> ~B.CTS + * 6 6 DSR -> ~A.SYNC + * 8 CD -> ~B.DCD + * 12 DSRS(DCE) -> ~A.CTS (*) + * 15 TxC -> B.TxC + * 17 RxC -> B.RxC + * 20 1 DTR <- ~A.DTR + * 22 RI -> ~A.DCD + * 23 DSRS(DTE) <- ~B.RTS + * + * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) + * is shared with DSRS(DTE) at pin 23. + * + * As you can immediately notice the wiring of the RTS, DTR and DSR signals + * is a bit odd. This makes the handling of port B unnecessarily + * complicated and prevents the use of some automatic modes of operation. + */ + +#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "zs.h" + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("DECstation Z85C30 serial driver"); +MODULE_LICENSE("GPL"); + + +static char zs_name[] __initdata = "DECstation Z85C30 serial driver version "; +static char zs_version[] __initdata = "0.10"; + +/* + * It would be nice to dynamically allocate everything that + * depends on ZS_NUM_SCCS, so we could support any number of + * Z85C30s, but for now... + */ +#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */ +#define ZS_NUM_CHAN 2 /* 2 channels per chip. */ +#define ZS_CHAN_A 0 /* Index of the channel A. */ +#define ZS_CHAN_B 1 /* Index of the channel B. */ +#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */ +#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */ +#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte + of the 16-bit IOBUS. */ +#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */ + +#define to_zport(uport) container_of(uport, struct zs_port, port) + +struct zs_parms { + resource_size_t scc[ZS_NUM_SCCS]; + int irq[ZS_NUM_SCCS]; +}; + +static struct zs_scc zs_sccs[ZS_NUM_SCCS]; + +static u8 zs_init_regs[ZS_NUM_REGS] __initdata = { + 0, /* write 0 */ + PAR_SPEC, /* write 1 */ + 0, /* write 2 */ + 0, /* write 3 */ + X16CLK | SB1, /* write 4 */ + 0, /* write 5 */ + 0, 0, 0, /* write 6, 7, 8 */ + MIE | DLC | NV, /* write 9 */ + NRZ, /* write 10 */ + TCBR | RCBR, /* write 11 */ + 0, 0, /* BRG time constant, write 12 + 13 */ + BRSRC | BRENABL, /* write 14 */ + 0, /* write 15 */ +}; + +/* + * Debugging. + */ +#undef ZS_DEBUG_REGS + + +/* + * Reading and writing Z85C30 registers. + */ +static void recovery_delay(void) +{ + udelay(2); +} + +static u8 read_zsreg(struct zs_port *zport, int reg) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + u8 retval; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); + recovery_delay(); + } + retval = readb(control); + recovery_delay(); + return retval; +} + +static void write_zsreg(struct zs_port *zport, int reg, u8 value) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); recovery_delay(); + } + writeb(value, control); + fast_iob(); + recovery_delay(); + return; +} + +static u8 read_zsdata(struct zs_port *zport) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + u8 retval; + + retval = readb(data); + recovery_delay(); + return retval; +} + +static void write_zsdata(struct zs_port *zport, u8 value) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + + writeb(value, data); + fast_iob(); + recovery_delay(); + return; +} + +#ifdef ZS_DEBUG_REGS +void zs_dump(void) +{ + struct zs_port *zport; + int i, j; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN]; + + if (!zport->scc) + continue; + + for (j = 0; j < 16; j++) + printk("W%-2d = 0x%02x\t", j, zport->regs[j]); + printk("\n"); + for (j = 0; j < 16; j++) + printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); + printk("\n\n"); + } +} +#endif + + +static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_lock_irq(lock); + else + spin_lock(lock); +} + +static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_unlock_irq(lock); + else + spin_unlock(lock); +} + +static int zs_receive_drain(struct zs_port *zport) +{ + int loops = 10000; + + while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops) + read_zsdata(zport); + return loops; +} + +static int zs_transmit_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + +static int zs_line_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + + +static void load_zsregs(struct zs_port *zport, u8 *regs, int irq) +{ + /* Let the current transmission finish. */ + zs_line_drain(zport, irq); + /* Load 'em up. */ + write_zsreg(zport, R3, regs[3] & ~RxENABLE); + write_zsreg(zport, R5, regs[5] & ~TxENAB); + write_zsreg(zport, R4, regs[4]); + write_zsreg(zport, R9, regs[9]); + write_zsreg(zport, R1, regs[1]); + write_zsreg(zport, R2, regs[2]); + write_zsreg(zport, R10, regs[10]); + write_zsreg(zport, R14, regs[14] & ~BRENABL); + write_zsreg(zport, R11, regs[11]); + write_zsreg(zport, R12, regs[12]); + write_zsreg(zport, R13, regs[13]); + write_zsreg(zport, R14, regs[14]); + write_zsreg(zport, R15, regs[15]); + if (regs[3] & RxENABLE) + write_zsreg(zport, R3, regs[3]); + if (regs[5] & TxENAB) + write_zsreg(zport, R5, regs[5]); + return; +} + + +/* + * Status handling routines. + */ + +/* + * zs_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static unsigned int zs_tx_empty(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 status; + + spin_lock_irqsave(&scc->zlock, flags); + status = read_zsreg(zport, R1); + spin_unlock_irqrestore(&scc->zlock, flags); + + return status & ALL_SNT ? TIOCSER_TEMT : 0; +} + +static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a, + struct zs_port *zport_b) +{ + u8 status_a, status_b; + unsigned int mctrl; + + status_a = read_zsreg(zport_a, R0); + status_b = read_zsreg(zport_b, R0); + + mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) | + ((status_b & DCD) ? TIOCM_CAR : 0) | + ((status_a & DCD) ? TIOCM_RNG : 0) | + ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0); + + return mctrl; +} + +static unsigned int zs_raw_get_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + + return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0; +} + +static unsigned int zs_raw_xor_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + unsigned int mmask, mctrl, delta; + u8 mask_a, mask_b; + + if (zport == zport_a) + return 0; + + mask_a = zport_a->regs[15]; + mask_b = zport->regs[15]; + + mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) | + ((mask_b & DCDIE) ? TIOCM_CAR : 0) | + ((mask_a & DCDIE) ? TIOCM_RNG : 0) | + ((mask_a & SYNCIE) ? TIOCM_DSR : 0); + + mctrl = zport->mctrl; + if (mmask) { + mctrl &= ~mmask; + mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask; + } + + delta = mctrl ^ zport->mctrl; + if (delta) + zport->mctrl = mctrl; + + return delta; +} + +static unsigned int zs_get_mctrl(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned int mctrl; + + spin_lock(&scc->zlock); + mctrl = zs_raw_get_mctrl(zport); + spin_unlock(&scc->zlock); + + return mctrl; +} + +static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + u8 oldloop, newloop; + + spin_lock(&scc->zlock); + if (zport != zport_a) { + if (mctrl & TIOCM_DTR) + zport_a->regs[5] |= DTR; + else + zport_a->regs[5] &= ~DTR; + if (mctrl & TIOCM_RTS) + zport_a->regs[5] |= RTS; + else + zport_a->regs[5] &= ~RTS; + write_zsreg(zport_a, R5, zport_a->regs[5]); + } + + /* Rarely modified, so don't poke at hardware unless necessary. */ + oldloop = zport->regs[14]; + newloop = oldloop; + if (mctrl & TIOCM_LOOP) + newloop |= LOOPBAK; + else + newloop &= ~LOOPBAK; + if (newloop != oldloop) { + zport->regs[14] = newloop; + write_zsreg(zport, R14, zport->regs[14]); + } + spin_unlock(&scc->zlock); +} + +static void zs_raw_stop_tx(struct zs_port *zport) +{ + write_zsreg(zport, R0, RES_Tx_P); + zport->tx_stopped = 1; +} + +static void zs_stop_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_stop_tx(zport); + spin_unlock(&scc->zlock); +} + +static void zs_raw_transmit_chars(struct zs_port *); + +static void zs_start_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + if (zport->tx_stopped) { + zs_transmit_drain(zport, 0); + zport->tx_stopped = 0; + zs_raw_transmit_chars(zport); + } + spin_unlock(&scc->zlock); +} + +static void zs_stop_rx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + spin_lock(&scc->zlock); + zport->regs[15] &= ~BRKIE; + zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB); + zport->regs[1] |= RxINT_DISAB; + + if (zport != zport_a) { + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[15] &= ~(DCDIE | SYNCIE); + write_zsreg(zport_a, R15, zport_a->regs[15]); + if (!(zport_a->regs[15] & BRKIE)) { + zport_a->regs[1] &= ~EXT_INT_ENAB; + write_zsreg(zport_a, R1, zport_a->regs[1]); + } + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] &= ~(DCDIE | CTSIE); + zport->regs[1] &= ~EXT_INT_ENAB; + } else { + /* DCD tracks RI and SYNC tracks DSR for the B side. */ + if (!(zport->regs[15] & (DCDIE | SYNCIE))) + zport->regs[1] &= ~EXT_INT_ENAB; + } + + write_zsreg(zport, R15, zport->regs[15]); + write_zsreg(zport, R1, zport->regs[1]); + spin_unlock(&scc->zlock); +} + +static void zs_enable_ms(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + if (zport == zport_a) + return; + + spin_lock(&scc->zlock); + + /* Clear Ext interrupts if not being handled already. */ + if (!(zport_a->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport_a, R0, RES_EXT_INT); + + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[1] |= EXT_INT_ENAB; + zport_a->regs[15] |= DCDIE | SYNCIE; + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] |= DCDIE | CTSIE; + + zs_raw_xor_mctrl(zport); + + write_zsreg(zport_a, R1, zport_a->regs[1]); + write_zsreg(zport_a, R15, zport_a->regs[15]); + write_zsreg(zport, R15, zport->regs[15]); + spin_unlock(&scc->zlock); +} + +static void zs_break_ctl(struct uart_port *uport, int break_state) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + if (break_state == -1) + zport->regs[5] |= SND_BRK; + else + zport->regs[5] &= ~SND_BRK; + write_zsreg(zport, R5, zport->regs[5]); + spin_unlock_irqrestore(&scc->zlock, flags); +} + + +/* + * Interrupt handling routines. + */ +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static void zs_receive_chars(struct zs_port *zport) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + struct uart_icount *icount; + unsigned int avail, status, ch, flag; + int count; + + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + avail = read_zsreg(zport, R0) & Rx_CH_AV; + spin_unlock(&scc->zlock); + if (!avail) + break; + + spin_lock(&scc->zlock); + status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR); + ch = read_zsdata(zport); + spin_unlock(&scc->zlock); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + status |= zport->tty_break; + if (unlikely(status & + (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) { + zport->tty_break = 0; + + /* Reset the error indication. */ + if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) { + spin_lock(&scc->zlock); + write_zsreg(zport, R0, ERR_RES); + spin_unlock(&scc->zlock); + } + + if (status & (Rx_SYS | Rx_BRK)) { + icount->brk++; + /* SysRq discards the null char. */ + if (status & Rx_SYS) + continue; + } else if (status & FRM_ERR) + icount->frame++; + else if (status & PAR_ERR) + icount->parity++; + if (status & Rx_OVR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & Rx_BRK) + flag = TTY_BREAK; + else if (status & FRM_ERR) + flag = TTY_FRAME; + else if (status & PAR_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, Rx_OVR, ch, flag); + } + + tty_flip_buffer_push(uport->state->port.tty); +} + +static void zs_raw_transmit_chars(struct zs_port *zport) +{ + struct circ_buf *xmit = &zport->port.state->xmit; + + /* XON/XOFF chars. */ + if (zport->port.x_char) { + write_zsdata(zport, zport->port.x_char); + zport->port.icount.tx++; + zport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) { + zs_raw_stop_tx(zport); + return; + } + + /* Send char. */ + write_zsdata(zport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + zport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&zport->port); + + /* Are we are done? */ + if (uart_circ_empty(xmit)) + zs_raw_stop_tx(zport); +} + +static void zs_transmit_chars(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_transmit_chars(zport); + spin_unlock(&scc->zlock); +} + +static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + unsigned int delta; + u8 status, brk; + + spin_lock(&scc->zlock); + + /* Get status from Read Register 0. */ + status = read_zsreg(zport, R0); + + if (zport->regs[15] & BRKIE) { + brk = status & BRK_ABRT; + if (brk && !zport->brk) { + spin_unlock(&scc->zlock); + if (uart_handle_break(uport)) + zport->tty_break = Rx_SYS; + else + zport->tty_break = Rx_BRK; + spin_lock(&scc->zlock); + } + zport->brk = brk; + } + + if (zport != zport_a) { + delta = zs_raw_xor_mctrl(zport); + spin_unlock(&scc->zlock); + + if (delta & TIOCM_CTS) + uart_handle_cts_change(uport, + zport->mctrl & TIOCM_CTS); + if (delta & TIOCM_CAR) + uart_handle_dcd_change(uport, + zport->mctrl & TIOCM_CAR); + if (delta & TIOCM_RNG) + uport->icount.dsr++; + if (delta & TIOCM_DSR) + uport->icount.rng++; + + if (delta) + wake_up_interruptible(&uport->state->port.delta_msr_wait); + + spin_lock(&scc->zlock); + } + + /* Clear the status condition... */ + write_zsreg(zport, R0, RES_EXT_INT); + + spin_unlock(&scc->zlock); +} + +/* + * This is the Z85C30 driver's generic interrupt routine. + */ +static irqreturn_t zs_interrupt(int irq, void *dev_id) +{ + struct zs_scc *scc = dev_id; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + struct zs_port *zport_b = &scc->zport[ZS_CHAN_B]; + irqreturn_t status = IRQ_NONE; + u8 zs_intreg; + int count; + + /* + * NOTE: The read register 3, which holds the irq status, + * does so for both channels on each chip. Although + * the status value itself must be read from the A + * channel and is only valid when read from channel A. + * Yes... broken hardware... + */ + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + zs_intreg = read_zsreg(zport_a, R3); + spin_unlock(&scc->zlock); + if (!zs_intreg) + break; + + /* + * We do not like losing characters, so we prioritise + * interrupt sources a little bit differently than + * the SCC would, was it allowed to. + */ + if (zs_intreg & CHBRxIP) + zs_receive_chars(zport_b); + if (zs_intreg & CHARxIP) + zs_receive_chars(zport_a); + if (zs_intreg & CHBEXT) + zs_status_handle(zport_b, zport_a); + if (zs_intreg & CHAEXT) + zs_status_handle(zport_a, zport_a); + if (zs_intreg & CHBTxIP) + zs_transmit_chars(zport_b); + if (zs_intreg & CHATxIP) + zs_transmit_chars(zport_a); + + status = IRQ_HANDLED; + } + + return status; +} + + +/* + * Finally, routines used to initialize the serial port. + */ +static int zs_startup(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + int ret; + + irq_guard = atomic_add_return(1, &scc->irq_guard); + if (irq_guard == 1) { + ret = request_irq(zport->port.irq, zs_interrupt, + IRQF_SHARED, "scc", scc); + if (ret) { + atomic_add(-1, &scc->irq_guard); + printk(KERN_ERR "zs: can't get irq %d\n", + zport->port.irq); + return ret; + } + } + + spin_lock_irqsave(&scc->zlock, flags); + + /* Clear the receive FIFO. */ + zs_receive_drain(zport); + + /* Clear the interrupt registers. */ + write_zsreg(zport, R0, ERR_RES); + write_zsreg(zport, R0, RES_Tx_P); + /* But Ext only if not being handled already. */ + if (!(zport->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport, R0, RES_EXT_INT); + + /* Finally, enable sequencing and interrupts. */ + zport->regs[1] &= ~RxINT_MASK; + zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; + zport->regs[3] |= RxENABLE; + zport->regs[15] |= BRKIE; + write_zsreg(zport, R1, zport->regs[1]); + write_zsreg(zport, R3, zport->regs[3]); + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R15, zport->regs[15]); + + /* Record the current state of RR0. */ + zport->mctrl = zs_raw_get_mctrl(zport); + zport->brk = read_zsreg(zport, R0) & BRK_ABRT; + + zport->tx_stopped = 1; + + spin_unlock_irqrestore(&scc->zlock, flags); + + return 0; +} + +static void zs_shutdown(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + + spin_lock_irqsave(&scc->zlock, flags); + + zport->regs[3] &= ~RxENABLE; + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R3, zport->regs[3]); + + spin_unlock_irqrestore(&scc->zlock, flags); + + irq_guard = atomic_add_return(-1, &scc->irq_guard); + if (!irq_guard) + free_irq(zport->port.irq, scc); +} + + +static void zs_reset(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (!scc->initialised) { + /* Reset the pointer first, just in case... */ + read_zsreg(zport, R0); + /* And let the current transmission finish. */ + zs_line_drain(zport, irq); + write_zsreg(zport, R9, FHWRES); + udelay(10); + write_zsreg(zport, R9, 0); + scc->initialised = 1; + } + load_zsregs(zport, zport->regs, irq); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + int irq; + unsigned int baud, brg; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + + /* Byte size. */ + zport->regs[3] &= ~RxNBITS_MASK; + zport->regs[5] &= ~TxNBITS_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + zport->regs[3] |= Rx5; + zport->regs[5] |= Tx5; + break; + case CS6: + zport->regs[3] |= Rx6; + zport->regs[5] |= Tx6; + break; + case CS7: + zport->regs[3] |= Rx7; + zport->regs[5] |= Tx7; + break; + case CS8: + default: + zport->regs[3] |= Rx8; + zport->regs[5] |= Tx8; + break; + } + + /* Parity and stop bits. */ + zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN); + if (termios->c_cflag & CSTOPB) + zport->regs[4] |= SB2; + else + zport->regs[4] |= SB1; + if (termios->c_cflag & PARENB) + zport->regs[4] |= PAR_ENA; + if (!(termios->c_cflag & PARODD)) + zport->regs[4] |= PAR_EVEN; + switch (zport->clk_mode) { + case 64: + zport->regs[4] |= X64CLK; + break; + case 32: + zport->regs[4] |= X32CLK; + break; + case 16: + zport->regs[4] |= X16CLK; + break; + case 1: + zport->regs[4] |= X1CLK; + break; + default: + BUG(); + } + + baud = uart_get_baud_rate(uport, termios, old_termios, 0, + uport->uartclk / zport->clk_mode / 4); + + brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode); + zport->regs[12] = brg & 0xff; + zport->regs[13] = (brg >> 8) & 0xff; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = Rx_OVR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + uport->read_status_mask |= Rx_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= Rx_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= Rx_OVR; + } + + if (termios->c_cflag & CREAD) + zport->regs[3] |= RxENABLE; + else + zport->regs[3] &= ~RxENABLE; + + if (zport != zport_a) { + if (!(termios->c_cflag & CLOCAL)) { + zport->regs[15] |= DCDIE; + } else + zport->regs[15] &= ~DCDIE; + if (termios->c_cflag & CRTSCTS) { + zport->regs[15] |= CTSIE; + } else + zport->regs[15] &= ~CTSIE; + zs_raw_xor_mctrl(zport); + } + + /* Load up the new values. */ + load_zsregs(zport, zport->regs, irq); + + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void zs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct zs_port *zport = to_zport(uport); + + if (state < 3) + zport->regs[5] |= TxENAB; + else + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); +} + + +static const char *zs_type(struct uart_port *uport) +{ + return "Z85C30 SCC"; +} + +static void zs_release_port(struct uart_port *uport) +{ + iounmap(uport->membase); + uport->membase = 0; + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); +} + +static int zs_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + ZS_CHAN_IO_SIZE); + if (!uport->membase) { + printk(KERN_ERR "zs: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int zs_request_port(struct uart_port *uport) +{ + int ret; + + if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) { + printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + ret = zs_map_port(uport); + if (ret) { + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); + return ret; + } + return 0; +} + +static void zs_config_port(struct uart_port *uport, int flags) +{ + struct zs_port *zport = to_zport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (zs_request_port(uport)) + return; + + uport->type = PORT_ZS; + + zs_reset(zport); + } +} + +static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + struct zs_port *zport = to_zport(uport); + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / zport->clk_mode / 4) + ret = -EINVAL; + return ret; +} + + +static struct uart_ops zs_ops = { + .tx_empty = zs_tx_empty, + .set_mctrl = zs_set_mctrl, + .get_mctrl = zs_get_mctrl, + .stop_tx = zs_stop_tx, + .start_tx = zs_start_tx, + .stop_rx = zs_stop_rx, + .enable_ms = zs_enable_ms, + .break_ctl = zs_break_ctl, + .startup = zs_startup, + .shutdown = zs_shutdown, + .set_termios = zs_set_termios, + .pm = zs_pm, + .type = zs_type, + .release_port = zs_release_port, + .request_port = zs_request_port, + .config_port = zs_config_port, + .verify_port = zs_verify_port, +}; + +/* + * Initialize Z85C30 port structures. + */ +static int __init zs_probe_sccs(void) +{ + static int probed; + struct zs_parms zs_parms; + int chip, side, irq; + int n_chips = 0; + int i; + + if (probed) + return 0; + + irq = dec_interrupt[DEC_IRQ_SCC0]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC0; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0]; + n_chips++; + } + irq = dec_interrupt[DEC_IRQ_SCC1]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC1; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1]; + n_chips++; + } + if (!n_chips) + return -ENXIO; + + probed = 1; + + for (chip = 0; chip < n_chips; chip++) { + spin_lock_init(&zs_sccs[chip].zlock); + for (side = 0; side < ZS_NUM_CHAN; side++) { + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + + zport->scc = &zs_sccs[chip]; + zport->clk_mode = 16; + + uport->irq = zs_parms.irq[chip]; + uport->uartclk = ZS_CLOCK; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &zs_ops; + uport->line = chip * ZS_NUM_CHAN + side; + uport->mapbase = dec_kn_slot_base + + zs_parms.scc[chip] + + (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE; + + for (i = 0; i < ZS_NUM_REGS; i++) + zport->regs[i] = zs_init_regs[i]; + } + } + + return 0; +} + + +#ifdef CONFIG_SERIAL_ZS_CONSOLE +static void zs_console_putchar(struct uart_port *uport, int ch) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (zs_transmit_drain(zport, irq)) + write_zsdata(zport, ch); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void zs_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 txint, txenb; + int irq; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&scc->zlock, flags); + txint = zport->regs[1]; + txenb = zport->regs[5]; + if (txint & TxINT_ENAB) { + zport->regs[1] = txint & ~TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + } + if (!(txenb & TxENAB)) { + zport->regs[5] = txenb | TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + spin_unlock_irqrestore(&scc->zlock, flags); + + uart_console_write(&zport->port, s, count, zs_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + zs_line_drain(zport, irq); + if (!(txenb & TxENAB)) { + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + if (txint & TxINT_ENAB) { + zport->regs[1] |= TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + } + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Setup serial console baud/bits/parity. We do two things here: + * - construct a cflag setting for the first uart_open() + * - initialise the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init zs_console_setup(struct console *co, char *options) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = zs_map_port(uport); + if (ret) + return ret; + + zs_reset(zport); + zs_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver zs_reg; +static struct console zs_console = { + .name = "ttyS", + .write = zs_console_write, + .device = uart_console_device, + .setup = zs_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &zs_reg, +}; + +/* + * Register console. + */ +static int __init zs_serial_console_init(void) +{ + int ret; + + ret = zs_probe_sccs(); + if (ret) + return ret; + register_console(&zs_console); + + return 0; +} + +console_initcall(zs_serial_console_init); + +#define SERIAL_ZS_CONSOLE &zs_console +#else +#define SERIAL_ZS_CONSOLE NULL +#endif /* CONFIG_SERIAL_ZS_CONSOLE */ + +static struct uart_driver zs_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = ZS_NUM_SCCS * ZS_NUM_CHAN, + .cons = SERIAL_ZS_CONSOLE, +}; + +/* zs_init inits the driver. */ +static int __init zs_init(void) +{ + int i, ret; + + pr_info("%s%s\n", zs_name, zs_version); + + /* Find out how many Z85C30 SCCs we have. */ + ret = zs_probe_sccs(); + if (ret) + return ret; + + ret = uart_register_driver(&zs_reg); + if (ret) + return ret; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_add_one_port(&zs_reg, uport); + } + + return 0; +} + +static void __exit zs_exit(void) +{ + int i; + + for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_remove_one_port(&zs_reg, uport); + } + + uart_unregister_driver(&zs_reg); +} + +module_init(zs_init); +module_exit(zs_exit); diff --git a/drivers/tty/serial/zs.h b/drivers/tty/serial/zs.h new file mode 100644 index 0000000..aa921b5 --- /dev/null +++ b/drivers/tty/serial/zs.h @@ -0,0 +1,284 @@ +/* + * zs.h: Definitions for the DECstation Z85C30 serial driver. + * + * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. + * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. + * + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2004, 2005, 2007 Maciej W. Rozycki + */ +#ifndef _SERIAL_ZS_H +#define _SERIAL_ZS_H + +#ifdef __KERNEL__ + +#define ZS_NUM_REGS 16 + +/* + * This is our internal structure for each serial port's state. + */ +struct zs_port { + struct zs_scc *scc; /* Containing SCC. */ + struct uart_port port; /* Underlying UART. */ + + int clk_mode; /* May be 1, 16, 32, or 64. */ + + unsigned int tty_break; /* Set on BREAK condition. */ + int tx_stopped; /* Output is suspended. */ + + unsigned int mctrl; /* State of modem lines. */ + u8 brk; /* BREAK state from RR0. */ + + u8 regs[ZS_NUM_REGS]; /* Channel write registers. */ +}; + +/* + * Per-SCC state for locking and the interrupt handler. + */ +struct zs_scc { + struct zs_port zport[2]; + spinlock_t zlock; + atomic_t irq_guard; + int initialised; +}; + +#endif /* __KERNEL__ */ + +/* + * Conversion routines to/from brg time constants from/to bits per second. + */ +#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* + * The Zilog register set. + */ + +/* Write Register 0 (Command) */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */ +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define RxINT_ALL 0x10 /* Int on all Rx Characters or error */ +#define RxINT_ERR 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register 2 (Interrupt Vector) */ + +/* Write Register 3 (Receive Parameters and Control) */ +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxNBITS_MASK 0xc0 + +/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */ +#define PAR_ENA 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xc0 /* x64 clock mode */ +#define XCLK_MASK 0xc0 + +/* Write Register 5 (Transmit Parameters and Controls) */ +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxNBITS_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (Transmit Buffer) */ + +/* Write Register 9 (Master Interrupt Control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode Control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 14 (Miscellaneous Control Bits) */ +#define BRENABL 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (External/Status Interrupt Control) */ +#define WR7P_EN 1 /* WR7 Prime SDLC Feature Enable */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 (Special Receive Condition Status) */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity Error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define FRM_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (Interrupt Vector (WR2) -- channel A). */ + +/* Read Register 2 (Modified Interrupt Vector -- channel B). */ + +/* Read Register 3 (Interrupt Pending Bits -- channel A only). */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */ + +/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */ + +/* Read Register 8 (Receive Data) */ + +/* Read Register 10 (Miscellaneous Status Bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */ + +/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */ + +/* Read Register 15 (External/Status Interrupt Control (WR15)) */ + +#endif /* _SERIAL_ZS_H */ -- cgit v1.1