From a97c13c34509be460dea23c86f31c02daa2428b5 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 23 Mar 2010 09:02:34 +0200 Subject: mac80211: Add support for connection quality monitoring Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: Juuso Oikarinen Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d14226f..1a8f50a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -144,6 +144,7 @@ struct ieee80211_low_level_stats { * new beacon (beaconing modes) * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be * enabled/disabled (beaconing modes) + * @BSS_CHANGED_CQM: Connection quality monitor config changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -156,6 +157,7 @@ enum ieee80211_bss_change { BSS_CHANGED_BSSID = 1<<7, BSS_CHANGED_BEACON = 1<<8, BSS_CHANGED_BEACON_ENABLED = 1<<9, + BSS_CHANGED_CQM = 1<<10, }; /** @@ -185,6 +187,9 @@ enum ieee80211_bss_change { * @enable_beacon: whether beaconing should be enabled or not * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). * This field is only valid when the channel type is one of the HT types. + * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value + * implies disabled + * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis */ struct ieee80211_bss_conf { const u8 *bssid; @@ -202,6 +207,8 @@ struct ieee80211_bss_conf { u64 timestamp; u32 basic_rates; u16 ht_operation_mode; + s32 cqm_rssi_thold; + u32 cqm_rssi_hyst; }; /** @@ -959,6 +966,12 @@ enum ieee80211_tkip_key_type { * periodic keep-alives to the AP and probing the AP on beacon loss. * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. + * + * @IEEE80211_HW_SUPPORTS_CQM_RSSI: + * Hardware can do connection quality monitoring - i.e. it can monitor + * connection quality related parameters, such as the RSSI level and + * provide notifications if configured trigger levels are reached. + * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -981,6 +994,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, + IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, }; /** @@ -2390,6 +2404,22 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); */ void ieee80211_connection_loss(struct ieee80211_vif *vif); +/** + * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring + * rssi threshold triggered + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @rssi_event: the RSSI trigger event type + * @gfp: context flags + * + * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality + * monitoring is configured with an rssi threshold, the driver will inform + * whenever the rssi level reaches the threshold. + */ +void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, + enum nl80211_cqm_rssi_threshold_event rssi_event, + gfp_t gfp); + /* Rate control API */ /** -- cgit v1.1