diff options
| -rw-r--r-- | arch/sh/include/asm/suspend.h | 27 | ||||
| -rw-r--r-- | arch/sh/kernel/asm-offsets.c | 10 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/shmobile/pm.c | 54 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/shmobile/sleep.S | 244 |
4 files changed, 171 insertions, 164 deletions
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index fab58cc..8e2c55d 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -34,6 +34,33 @@ extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list; void sh_mobile_register_self_refresh(unsigned long flags, void *pre_start, void *pre_end, void *post_start, void *post_end); + +/* register structure for address/data information */ +struct sh_sleep_regs { + unsigned long stbcr; +}; + +/* data area for low-level sleep code */ +struct sh_sleep_data { + /* current sleep mode (SUSP_SH_...) */ + unsigned long mode; + + /* addresses of board specific self-refresh snippets */ + unsigned long sf_pre; + unsigned long sf_post; + + /* register state saved and restored by the assembly code */ + unsigned long vbr; + unsigned long spc; + unsigned long sr; + + /* structure for keeping register addresses */ + struct sh_sleep_regs addr; + + /* structure for saving/restoring register state */ + struct sh_sleep_regs data; +}; + #endif /* flags passed to assembly suspend code */ diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index d218e80..9bdeff9 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -34,5 +34,15 @@ int main(void) DEFINE(PBE_NEXT, offsetof(struct pbe, next)); DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs)); #endif + + DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode)); + DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre)); + DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post)); + DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr)); + DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc)); + DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr)); + DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr)); + DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data)); + DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr)); return 0; } diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c index b424747..cb3d28f 100644 --- a/arch/sh/kernel/cpu/shmobile/pm.c +++ b/arch/sh/kernel/cpu/shmobile/pm.c @@ -42,13 +42,14 @@ ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list); #define ILRAM_BASE 0xe5200000 -extern const unsigned char sh_mobile_standby[]; -extern const unsigned int sh_mobile_standby_size; - void sh_mobile_call_standby(unsigned long mode) { void *onchip_mem = (void *)ILRAM_BASE; - void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem; + struct sh_sleep_data *sdp = onchip_mem; + void (*standby_onchip_mem)(unsigned long, unsigned long); + + /* code located directly after data structure */ + standby_onchip_mem = (void *)(sdp + 1); atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list, mode, NULL); @@ -60,10 +61,48 @@ void sh_mobile_call_standby(unsigned long mode) mode, NULL); } +extern char sh_mobile_sleep_enter_start; +extern char sh_mobile_sleep_enter_end; + +extern char sh_mobile_sleep_resume_start; +extern char sh_mobile_sleep_resume_end; + void sh_mobile_register_self_refresh(unsigned long flags, void *pre_start, void *pre_end, void *post_start, void *post_end) { + void *onchip_mem = (void *)ILRAM_BASE; + void *vp; + struct sh_sleep_data *sdp; + int n; + + /* part 0: data area */ + sdp = onchip_mem; + sdp->addr.stbcr = 0xa4150020; /* STBCR */ + vp = sdp + 1; + + /* part 1: common code to enter sleep mode */ + n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start; + memcpy(vp, &sh_mobile_sleep_enter_start, n); + vp += roundup(n, 4); + + /* part 2: board specific code to enter self-refresh mode */ + n = pre_end - pre_start; + memcpy(vp, pre_start, n); + sdp->sf_pre = (unsigned long)vp; + vp += roundup(n, 4); + + /* part 3: board specific code to resume from self-refresh mode */ + n = post_end - post_start; + memcpy(vp, post_start, n); + sdp->sf_post = (unsigned long)vp; + vp += roundup(n, 4); + + /* part 4: common code to resume from sleep mode */ + WARN_ON(vp > (onchip_mem + 0x600)); + vp = onchip_mem + 0x600; /* located at interrupt vector */ + n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start; + memcpy(vp, &sh_mobile_sleep_resume_start, n); } static int sh_pm_enter(suspend_state_t state) @@ -83,13 +122,6 @@ static struct platform_suspend_ops sh_pm_ops = { static int __init sh_pm_init(void) { - void *onchip_mem = (void *)ILRAM_BASE; - - /* Copy the assembly snippet to the otherwise ununsed ILRAM */ - memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size); - wmb(); - ctrl_barrier(); - suspend_set_ops(&sh_pm_ops); sh_mobile_setup_cpuidle(); return 0; diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index a439e6c..d3221d9 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -20,79 +20,49 @@ * Kernel mode register usage, see entry.S: * k0 scratch * k1 scratch - * k4 scratch */ #define k0 r0 #define k1 r1 -#define k4 r4 -/* manage self-refresh and enter standby mode. +/* manage self-refresh and enter standby mode. must be self-contained. * this code will be copied to on-chip memory and executed from there. */ + .balign 4 +ENTRY(sh_mobile_sleep_enter_start) - .balign 4096,0,4096 -ENTRY(sh_mobile_standby) + /* save mode flags */ + mov.l r4, @(SH_SLEEP_MODE, r5) /* save original vbr */ - stc vbr, r1 - mova saved_vbr, r0 - mov.l r1, @r0 + stc vbr, r0 + mov.l r0, @(SH_SLEEP_VBR, r5) /* point vbr to our on-chip memory page */ ldc r5, vbr /* save return address */ - mova saved_spc, r0 - sts pr, r5 - mov.l r5, @r0 + sts pr, r0 + mov.l r0, @(SH_SLEEP_SPC, r5) /* save sr */ - mova saved_sr, r0 - stc sr, r5 - mov.l r5, @r0 + stc sr, r0 + mov.l r0, @(SH_SLEEP_SR, r5) - /* save mode flags */ - mova saved_mode, r0 - mov.l r4, @r0 - - /* put mode flags in r0 */ - mov r4, r0 + /* save stbcr */ + bsr save_register + mov #SH_SLEEP_REG_STBCR, r0 + /* call self-refresh entering code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_SF, r0 bt skip_set_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in self-refresh mode */ - mov.l dben_reg, r4 - mov.l dben_data0, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data1, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data1, r1 - mov.l r1, @r4 -#else - /* SBSC: disable power down and put in self-refresh mode */ - mov.l 1f, r4 - mov.l 2f, r1 - mov.l @r4, r2 - or r1, r2 - mov.l 3f, r3 - and r3, r2 - mov.l r2, @r4 -#endif + + mov.l @(SH_SLEEP_SF_PRE, r5), r0 + jsr @r0 + nop skip_set_sf: + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_STANDBY, r0 bt test_rstandby @@ -123,124 +93,92 @@ force_sleep: do_sleep: /* setup and enter selected standby mode */ - mov.l 5f, r4 - mov.l r1, @r4 + bsr get_register + mov #SH_SLEEP_REG_STBCR, r0 + mov.l r1, @r0 again: sleep bra again nop -restore_jump_vbr: +save_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_ADDR, r0 + mov.l @r1, r1 + add #SH_SLEEP_BASE_DATA, r0 + mov.l r1, @(r0, r5) + add #-SH_SLEEP_BASE_DATA, r0 + rts + nop + +get_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + rts + nop +ENTRY(sh_mobile_sleep_enter_end) + + .balign 4 +ENTRY(sh_mobile_sleep_resume_start) + + /* figure out start address */ + bsr 0f + nop +0: + sts pr, k1 + mov.l 1f, k0 + and k0, k1 + + /* store pointer to data area in VBR */ + ldc k1, vbr + + /* setup sr with saved sr */ + mov.l @(SH_SLEEP_SR, k1), k0 + ldc k0, sr + + /* now: user register set! */ + stc vbr, r5 + /* setup spc with return address to c code */ - mov.l saved_spc, k0 - ldc k0, spc + mov.l @(SH_SLEEP_SPC, r5), r0 + ldc r0, spc /* restore vbr */ - mov.l saved_vbr, k0 - ldc k0, vbr + mov.l @(SH_SLEEP_VBR, r5), r0 + ldc r0, vbr /* setup ssr with saved sr */ - mov.l saved_sr, k0 - ldc k0, ssr - - /* get mode flags */ - mov.l saved_mode, k0 + mov.l @(SH_SLEEP_SR, r5), r0 + ldc r0, ssr -done_sleep: - /* reset standby mode to sleep mode */ - mov.l 5f, k4 - mov #0x00, k1 - mov.l k1, @k4 + /* restore sleep mode register */ + bsr restore_register + mov #SH_SLEEP_REG_STBCR, r0 - tst #SUSP_SH_SF, k0 + /* call self-refresh resume code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_SF, r0 bt skip_restore_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in auto-refresh mode */ - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data0, k1 - mov.l k1, @k4 - - nop /* sleep 140 ns */ - nop - nop - nop - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data0, k1 - mov.l k1, @k4 - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data1, k1 - mov.l k1, @k4 - - mov.l dben_reg, k4 - mov.l dben_data1, k1 - mov.l k1, @k4 - - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data2, k1 - mov.l k1, @k4 -#else - /* SBSC: set auto-refresh mode */ - mov.l 1f, k4 - mov.l @k4, k0 - mov.l 4f, k1 - and k1, k0 - mov.l k0, @k4 - mov.l 6f, k4 - mov.l 8f, k0 - mov.l @k4, k1 - mov #-1, k4 - add k4, k1 - or k1, k0 - mov.l 7f, k1 - mov.l k0, @k1 -#endif + mov.l @(SH_SLEEP_SF_POST, r5), r0 + jsr @r0 + nop + skip_restore_sf: - /* jump to vbr vector */ - mov.l saved_vbr, k0 - mov.l offset_vbr, k4 - add k4, k0 - jmp @k0 + rte nop - .balign 4 -saved_mode: .long 0 -saved_spc: .long 0 -saved_sr: .long 0 -saved_vbr: .long 0 -offset_vbr: .long 0x600 -#ifdef CONFIG_CPU_SUBTYPE_SH7724 -dben_reg: .long 0xfd000010 /* DBEN */ -dben_data0: .long 0 -dben_data1: .long 1 -dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ -dbrfpdn0_data0: .long 0 -dbrfpdn0_data1: .long 1 -dbrfpdn0_data2: .long 0x00010000 -dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ -dbcmdcnt_data0: .long 2 -dbcmdcnt_data1: .long 4 -#else -1: .long 0xfe400008 /* SDCR0 */ -2: .long 0x00000400 -3: .long 0xffff7fff -4: .long 0xfffffbff -#endif -5: .long 0xa4150020 /* STBCR */ -6: .long 0xfe40001c /* RTCOR */ -7: .long 0xfe400018 /* RTCNT */ -8: .long 0xa55a0000 - - -/* interrupt vector @ 0x600 */ - .balign 0x400,0,0x400 - .long 0xdeadbeef - .balign 0x200,0,0x200 - bra restore_jump_vbr +restore_register: + add #SH_SLEEP_BASE_DATA, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_DATA, r0 + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + mov.l r1, @r0 + rts nop -sh_mobile_standby_end: -ENTRY(sh_mobile_standby_size) - .long sh_mobile_standby_end - sh_mobile_standby + .balign 4 +1: .long ~0x7ff +ENTRY(sh_mobile_sleep_resume_end) |