diff options
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 50 |
1 files changed, 28 insertions, 22 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index c2f14dc..9542995 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev) unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; unsigned int bfsize = priv->dma_buf_sz; - int buff2_needed = 0; - int dis_ic = 0; + int buff2_needed = 0, dis_ic = 0; -#ifdef CONFIG_STMMAC_TIMER - /* Using Timers disable interrupts on completion for the reception */ - dis_ic = 1; -#endif /* Set the Buffer size according to the MTU; * indeed, in case of jumbo we need to bump-up the buffer sizes. */ @@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev) else bfsize = DMA_BUFFER_SIZE; +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif /* If the MTU exceeds 8k so use the second buffer in the chain */ if (bfsize >= BUF_SIZE_8KiB) buff2_needed = 1; @@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv) static inline void stmmac_enable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_start(tmrate); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else #endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); } static inline void stmmac_disable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(0, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_stop(); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else #endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); } static int stmmac_has_work(struct stmmac_priv *priv) @@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev) } #ifdef CONFIG_STMMAC_TIMER - priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); if (unlikely(priv->tm == NULL)) { pr_err("%s: ERROR: timer memory alloc failed \n", __func__); return -ENOMEM; } priv->tm->freq = tmrate; - /* Test if the HW timer can be actually used. - * In case of failure continue with no timer. */ + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the HW timer\n"); + pr_warning("stmmaceth: cannot attach the external timer.\n"); tmrate = 0; priv->tm->freq = 0; priv->tm->timer_start = stmmac_no_timer_started; priv->tm->timer_stop = stmmac_no_timer_stopped; - } + } else + priv->tm->enable = 1; #endif /* Create and initialize the TX/RX descriptors chains. */ @@ -1322,9 +1325,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Interrupt on completition only for the latest segment */ priv->mac_type->ops->close_tx_desc(desc); + #ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timers */ - priv->mac_type->ops->clear_tx_ic(desc); + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); #endif /* To avoid raise condition */ priv->mac_type->ops->set_tx_owner(first); @@ -2028,7 +2033,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); - dis_ic = 1; + if (likely(priv->tm->enable)) + dis_ic = 1; #endif napi_disable(&priv->napi); |