aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/dcache.h2
-rw-r--r--include/linux/device.h25
-rw-r--r--include/linux/fs.h1
-rw-r--r--include/linux/isa.h28
-rw-r--r--include/linux/key.h23
-rw-r--r--include/linux/kobject.h2
-rw-r--r--include/linux/security.h10
-rw-r--r--include/linux/sysdev.h18
-rw-r--r--include/linux/tty.h4
-rw-r--r--include/linux/usb.h22
-rw-r--r--include/linux/usb/cdc.h (renamed from include/linux/usb_cdc.h)0
-rw-r--r--include/linux/usb/input.h (renamed from include/linux/usb_input.h)0
-rw-r--r--include/linux/usb/isp116x.h (renamed from include/linux/usb_isp116x.h)0
-rw-r--r--include/linux/usb/sl811.h (renamed from include/linux/usb_sl811.h)8
-rw-r--r--include/linux/zconf.h12
-rw-r--r--include/linux/zlib.h209
-rw-r--r--include/linux/zutil.h12
17 files changed, 254 insertions, 122 deletions
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 836325e..46d0e07 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -217,7 +217,7 @@ extern struct dentry * d_alloc_anon(struct inode *);
extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
extern void shrink_dcache_sb(struct super_block *);
extern void shrink_dcache_parent(struct dentry *);
-extern void shrink_dcache_anon(struct hlist_head *);
+extern void shrink_dcache_anon(struct super_block *);
extern int d_invalidate(struct dentry *);
/* only used at mount-time */
diff --git a/include/linux/device.h b/include/linux/device.h
index b2e5da2..1e5f30d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -60,11 +60,6 @@ extern void bus_unregister(struct bus_type * bus);
extern void bus_rescan_devices(struct bus_type * bus);
-extern struct bus_type * get_bus(struct bus_type * bus);
-extern void put_bus(struct bus_type * bus);
-
-extern struct bus_type * find_bus(char * name);
-
/* iterator helpers for buses */
int bus_for_each_dev(struct bus_type * bus, struct device * start, void * data,
@@ -147,6 +142,7 @@ struct class {
struct subsystem subsys;
struct list_head children;
+ struct list_head devices;
struct list_head interfaces;
struct semaphore sem; /* locks both the children and interfaces lists */
@@ -163,9 +159,6 @@ struct class {
extern int class_register(struct class *);
extern void class_unregister(struct class *);
-extern struct class * class_get(struct class *);
-extern void class_put(struct class *);
-
struct class_attribute {
struct attribute attr;
@@ -313,6 +306,7 @@ struct device {
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
struct device_attribute uevent_attr;
+ struct device_attribute *devt_attr;
struct semaphore sem; /* semaphore to synchronize calls to
* its driver.
@@ -340,6 +334,11 @@ struct device {
struct dma_coherent_mem *dma_mem; /* internal for coherent mem
override */
+ /* class_device migration path */
+ struct list_head node;
+ struct class *class; /* optional*/
+ dev_t devt; /* dev_t, creates the sysfs "dev" */
+
void (*release)(struct device * dev);
};
@@ -381,6 +380,13 @@ extern int device_attach(struct device * dev);
extern void driver_attach(struct device_driver * drv);
extern void device_reprobe(struct device *dev);
+/*
+ * Easy functions for dynamically creating devices on the fly
+ */
+extern struct device *device_create(struct class *cls, struct device *parent,
+ dev_t devt, char *fmt, ...)
+ __attribute__((format(printf,4,5)));
+extern void device_destroy(struct class *cls, dev_t devt);
/*
* Platform "fixup" functions - allow the platform to have their say
@@ -410,8 +416,9 @@ extern int firmware_register(struct subsystem *);
extern void firmware_unregister(struct subsystem *);
/* debugging and troubleshooting/diagnostic helpers. */
+extern const char *dev_driver_string(struct device *dev);
#define dev_printk(level, dev, format, arg...) \
- printk(level "%s %s: " format , (dev)->driver ? (dev)->driver->name : "" , (dev)->bus_id , ## arg)
+ printk(level "%s %s: " format , dev_driver_string(dev) , (dev)->bus_id , ## arg)
#ifdef DEBUG
#define dev_dbg(dev, format, arg...) \
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ecc8c2c..73c7d6f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -782,7 +782,6 @@ extern int setlease(struct file *, long, struct file_lock **);
extern int lease_modify(struct file_lock **, int);
extern int lock_may_read(struct inode *, loff_t start, unsigned long count);
extern int lock_may_write(struct inode *, loff_t start, unsigned long count);
-extern void steal_locks(fl_owner_t from);
struct fasync_struct {
int magic;
diff --git a/include/linux/isa.h b/include/linux/isa.h
new file mode 100644
index 0000000..1b85533
--- /dev/null
+++ b/include/linux/isa.h
@@ -0,0 +1,28 @@
+/*
+ * ISA bus.
+ */
+
+#ifndef __LINUX_ISA_H
+#define __LINUX_ISA_H
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+struct isa_driver {
+ int (*match)(struct device *, unsigned int);
+ int (*probe)(struct device *, unsigned int);
+ int (*remove)(struct device *, unsigned int);
+ void (*shutdown)(struct device *, unsigned int);
+ int (*suspend)(struct device *, unsigned int, pm_message_t);
+ int (*resume)(struct device *, unsigned int);
+
+ struct device_driver driver;
+ struct device *devices;
+};
+
+#define to_isa_driver(x) container_of((x), struct isa_driver, driver)
+
+int isa_register_driver(struct isa_driver *, unsigned int);
+void isa_unregister_driver(struct isa_driver *);
+
+#endif /* __LINUX_ISA_H */
diff --git a/include/linux/key.h b/include/linux/key.h
index cbf464a..e81ebf9 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -205,6 +205,11 @@ struct key_type {
/* match a key against a description */
int (*match)(const struct key *key, const void *desc);
+ /* clear some of the data from a key on revokation (optional)
+ * - the key's semaphore will be write-locked by the caller
+ */
+ void (*revoke)(struct key *key);
+
/* clear the data from a key (optional) */
void (*destroy)(struct key *key);
@@ -241,8 +246,9 @@ extern void unregister_key_type(struct key_type *ktype);
extern struct key *key_alloc(struct key_type *type,
const char *desc,
- uid_t uid, gid_t gid, key_perm_t perm,
- int not_in_quota);
+ uid_t uid, gid_t gid,
+ struct task_struct *ctx,
+ key_perm_t perm, int not_in_quota);
extern int key_payload_reserve(struct key *key, size_t datalen);
extern int key_instantiate_and_link(struct key *key,
const void *data,
@@ -292,7 +298,9 @@ extern int key_unlink(struct key *keyring,
struct key *key);
extern struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
- int not_in_quota, struct key *dest);
+ struct task_struct *ctx,
+ int not_in_quota,
+ struct key *dest);
extern int keyring_clear(struct key *keyring);
@@ -313,7 +321,8 @@ extern void keyring_replace_payload(struct key *key, void *replacement);
* the userspace interface
*/
extern struct key root_user_keyring, root_session_keyring;
-extern int alloc_uid_keyring(struct user_struct *user);
+extern int alloc_uid_keyring(struct user_struct *user,
+ struct task_struct *ctx);
extern void switch_uid_keyring(struct user_struct *new_user);
extern int copy_keys(unsigned long clone_flags, struct task_struct *tsk);
extern int copy_thread_group_keys(struct task_struct *tsk);
@@ -342,7 +351,7 @@ extern void key_init(void);
#define make_key_ref(k) ({ NULL; })
#define key_ref_to_ptr(k) ({ NULL; })
#define is_key_possessed(k) 0
-#define alloc_uid_keyring(u) 0
+#define alloc_uid_keyring(u,c) 0
#define switch_uid_keyring(u) do { } while(0)
#define __install_session_keyring(t, k) ({ NULL; })
#define copy_keys(f,t) 0
@@ -355,6 +364,10 @@ extern void key_init(void);
#define key_fsgid_changed(t) do { } while(0)
#define key_init() do { } while(0)
+/* Initial keyrings */
+extern struct key root_user_keyring;
+extern struct key root_session_keyring;
+
#endif /* CONFIG_KEYS */
#endif /* __KERNEL__ */
#endif /* _LINUX_KEY_H */
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index c187c53..2d22932 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -190,6 +190,8 @@ struct subsystem _varname##_subsys = { \
/* The global /sys/kernel/ subsystem for people to chain off of */
extern struct subsystem kernel_subsys;
+/* The global /sys/hypervisor/ subsystem */
+extern struct subsystem hypervisor_subsys;
/**
* Helpers for setting the kset of registered objects.
diff --git a/include/linux/security.h b/include/linux/security.h
index 4dfb1b8..47722d3 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1313,7 +1313,7 @@ struct security_operations {
/* key management security hooks */
#ifdef CONFIG_KEYS
- int (*key_alloc)(struct key *key);
+ int (*key_alloc)(struct key *key, struct task_struct *tsk);
void (*key_free)(struct key *key);
int (*key_permission)(key_ref_t key_ref,
struct task_struct *context,
@@ -3008,9 +3008,10 @@ static inline int security_xfrm_policy_lookup(struct xfrm_policy *xp, u32 sk_sid
#ifdef CONFIG_KEYS
#ifdef CONFIG_SECURITY
-static inline int security_key_alloc(struct key *key)
+static inline int security_key_alloc(struct key *key,
+ struct task_struct *tsk)
{
- return security_ops->key_alloc(key);
+ return security_ops->key_alloc(key, tsk);
}
static inline void security_key_free(struct key *key)
@@ -3027,7 +3028,8 @@ static inline int security_key_permission(key_ref_t key_ref,
#else
-static inline int security_key_alloc(struct key *key)
+static inline int security_key_alloc(struct key *key,
+ struct task_struct *tsk)
{
return 0;
}
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index 2a4b432..166a2e5 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -37,11 +37,27 @@ struct sysdev_class {
struct kset kset;
};
+struct sysdev_class_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct sysdev_class *, char *);
+ ssize_t (*store)(struct sysdev_class *, const char *, size_t);
+};
+
+#define SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \
+struct sysdev_class_attribute attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .show = _show, \
+ .store = _store, \
+};
+
extern int sysdev_class_register(struct sysdev_class *);
extern void sysdev_class_unregister(struct sysdev_class *);
-
+extern int sysdev_class_create_file(struct sysdev_class *,
+ struct sysdev_class_attribute *);
+extern void sysdev_class_remove_file(struct sysdev_class *,
+ struct sysdev_class_attribute *);
/**
* Auxillary system device drivers.
*/
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e898eeb..cb35ca5 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -290,7 +290,9 @@ extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
-extern void tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev);
+extern struct class_device *tty_register_device(struct tty_driver *driver,
+ unsigned index,
+ struct device *dev);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
int buflen);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 1f492c0..8dead32 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -40,6 +40,8 @@ struct usb_driver;
* Devices may also have class-specific or vendor-specific descriptors.
*/
+struct ep_device;
+
/**
* struct usb_host_endpoint - host-side endpoint descriptor and queue
* @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
@@ -57,7 +59,7 @@ struct usb_host_endpoint {
struct usb_endpoint_descriptor desc;
struct list_head urb_list;
void *hcpriv;
- struct kobject *kobj; /* For sysfs info */
+ struct ep_device *ep_dev; /* For sysfs info */
unsigned char *extra; /* Extra descriptors */
int extralen;
@@ -101,7 +103,8 @@ enum usb_interface_condition {
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
* @dev: driver model's view of this device
- * @class_dev: driver model's class view of this device.
+ * @usb_dev: if an interface is bound to the USB major, this will point
+ * to the sysfs representation for that device.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
@@ -141,7 +144,7 @@ struct usb_interface {
* bound to */
enum usb_interface_condition condition; /* state of binding */
struct device dev; /* interface specific device info */
- struct class_device *class_dev;
+ struct device *usb_dev; /* pointer to the usb class's device, if any */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
@@ -358,7 +361,7 @@ struct usb_device {
char *serial; /* iSerialNumber string, if present */
struct list_head filelist;
- struct class_device *class_dev;
+ struct device *usbfs_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
/*
@@ -386,6 +389,8 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
+extern int usb_reset_composite_device(struct usb_device *dev,
+ struct usb_interface *iface);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
@@ -554,6 +559,10 @@ struct usb_dynids {
* do (or don't) show up otherwise in the filesystem.
* @suspend: Called when the device is going to be suspended by the system.
* @resume: Called when the device is being resumed by the system.
+ * @pre_reset: Called by usb_reset_composite_device() when the device
+ * is about to be reset.
+ * @post_reset: Called by usb_reset_composite_device() after the device
+ * has been reset.
* @id_table: USB drivers use ID table to support hotplugging.
* Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
* or your driver's probe function will never get called.
@@ -592,6 +601,9 @@ struct usb_driver {
int (*suspend) (struct usb_interface *intf, pm_message_t message);
int (*resume) (struct usb_interface *intf);
+ void (*pre_reset) (struct usb_interface *intf);
+ void (*post_reset) (struct usb_interface *intf);
+
const struct usb_device_id *id_table;
struct usb_dynids dynids;
@@ -1008,6 +1020,8 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
void *data, __u16 size, int timeout);
+extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+ void *data, int len, int *actual_length, int timeout);
extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length,
int timeout);
diff --git a/include/linux/usb_cdc.h b/include/linux/usb/cdc.h
index ba617c3..ba617c3 100644
--- a/include/linux/usb_cdc.h
+++ b/include/linux/usb/cdc.h
diff --git a/include/linux/usb_input.h b/include/linux/usb/input.h
index 716e0cc..716e0cc 100644
--- a/include/linux/usb_input.h
+++ b/include/linux/usb/input.h
diff --git a/include/linux/usb_isp116x.h b/include/linux/usb/isp116x.h
index 436dd8a..436dd8a 100644
--- a/include/linux/usb_isp116x.h
+++ b/include/linux/usb/isp116x.h
diff --git a/include/linux/usb_sl811.h b/include/linux/usb/sl811.h
index 4f2d012..397ee3b 100644
--- a/include/linux/usb_sl811.h
+++ b/include/linux/usb/sl811.h
@@ -14,13 +14,13 @@ struct sl811_platform_data {
u8 power;
/* sl811 relies on an external source of VBUS current */
- void (*port_power)(struct device *dev, int is_on);
+ void (*port_power)(struct device *dev, int is_on);
/* pulse sl811 nRST (probably with a GPIO) */
- void (*reset)(struct device *dev);
+ void (*reset)(struct device *dev);
// some boards need something like these:
- // int (*check_overcurrent)(struct device *dev);
- // void (*clock_enable)(struct device *dev, int is_on);
+ // int (*check_overcurrent)(struct device *dev);
+ // void (*clock_enable)(struct device *dev, int is_on);
};
diff --git a/include/linux/zconf.h b/include/linux/zconf.h
index f1cfd66..0beb75e 100644
--- a/include/linux/zconf.h
+++ b/include/linux/zconf.h
@@ -35,6 +35,18 @@
# define MAX_WBITS 15 /* 32K LZ77 window */
#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+
/* Type declarations */
typedef unsigned char Byte; /* 8 bits */
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
index 4fa32f0..9e3192a 100644
--- a/include/linux/zlib.h
+++ b/include/linux/zlib.h
@@ -1,7 +1,6 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.1.3, July 9th, 1998
- Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -24,7 +23,7 @@
The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+ Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
*/
@@ -33,7 +32,22 @@
#include <linux/zconf.h>
-#define ZLIB_VERSION "1.1.3"
+/* zlib deflate based on ZLIB_VERSION "1.1.3" */
+/* zlib inflate based on ZLIB_VERSION "1.2.3" */
+
+/*
+ This is a modified version of zlib for use inside the Linux kernel.
+ The main changes are to perform all memory allocation in advance.
+
+ Inflation Changes:
+ * Z_PACKET_FLUSH is added and used by ppp_deflate. Before returning
+ this checks there is no more input data available and the next data
+ is a STORED block. It also resets the mode to be read for the next
+ data, all as per PPP requirements.
+ * Addition of zlib_inflateIncomp which copies incompressible data into
+ the history window and adjusts the accoutning without calling
+ zlib_inflate itself to inflate the data.
+*/
/*
The 'zlib' compression library provides in-memory compression and
@@ -48,9 +62,18 @@
application must provide more input and/or consume the output
(providing more output space) before each call.
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
The library also supports reading and writing files in gzip (.gz) format
with an interface similar to that of stdio.
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
The library does not install any signal handler. The decoder checks
the consistency of the compressed data, so the library should never
crash even in case of corrupted input.
@@ -119,7 +142,8 @@ typedef z_stream *z_streamp;
#define Z_SYNC_FLUSH 3
#define Z_FULL_FLUSH 4
#define Z_FINISH 5
-/* Allowed flush values; see deflate() below for details */
+#define Z_BLOCK 6 /* Only for inflate at present */
+/* Allowed flush values; see deflate() and inflate() below for details */
#define Z_OK 0
#define Z_STREAM_END 1
@@ -155,13 +179,6 @@ typedef z_stream *z_streamp;
/* basic functions */
-extern const char * zlib_zlibVersion (void);
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
- */
-
extern int zlib_deflate_workspacesize (void);
/*
Returns the number of bytes that needs to be allocated for a per-
@@ -315,9 +332,9 @@ extern int zlib_inflateInit (z_streamp strm);
extern int zlib_inflate (z_streamp strm, int flush);
/*
inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may some
- introduce some output latency (reading input without producing any output)
- except when forced to flush.
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
The detailed semantics are as follows. inflate performs one or both of the
following actions:
@@ -341,11 +358,26 @@ extern int zlib_inflate (z_streamp strm, int flush);
must be called again after making room in the output buffer because there
might be more output pending.
- If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
- output as possible to the output buffer. The flushing behavior of inflate is
- not specified for values of the flush parameter other than Z_SYNC_FLUSH
- and Z_FINISH, but the current implementation actually flushes as much output
- as possible anyway.
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
+ Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate() stop
+ if and when it gets to the next deflate block boundary. When decoding the
+ zlib or gzip format, this will cause inflate() to return immediately after
+ the header and before the first block. When doing a raw inflate, inflate()
+ will go ahead and process the first block, and will return when it gets to
+ the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64
+ if inflate() is currently decoding the last block in the deflate stream,
+ plus 128 if inflate() returned immediately after decoding an end-of-block
+ code or decoding the complete header up to just before the first byte of the
+ deflate stream. The end-of-block will not be indicated until all of the
+ uncompressed data from that block has been written to strm->next_out. The
+ number of unused bits may in general be greater than seven, except when
+ bit 7 of data_type is set, in which case the number of unused bits will be
+ less than eight.
inflate() should normally be called until it returns Z_STREAM_END or an
error. However if all decompression is to be performed in a single step
@@ -355,29 +387,44 @@ extern int zlib_inflate (z_streamp strm, int flush);
uncompressed data. (The size of the uncompressed data may have been saved
by the compressor for this purpose.) The next operation on this stream must
be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
+ is never required, but can be used to inform inflate that a faster approach
may be used for the single inflate() call.
- If a preset dictionary is needed at this point (see inflateSetDictionary
- below), inflate sets strm-adler to the adler32 checksum of the
- dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
- it sets strm->adler to the adler32 checksum of all output produced
- so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
- an error code as described below. At the end of the stream, inflate()
- checks that its computed adler32 checksum is equal to that saved by the
- compressor and returns Z_STREAM_END only if the checksum is correct.
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the only effect of the flush parameter in this implementation
+ is on the return value of inflate(), as noted below, or when it returns early
+ because Z_BLOCK is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the adler32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the adler32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() will decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically. Any information
+ contained in the gzip header is not retained, so applications that need that
+ information should instead use raw inflate, see inflateInit2() below, or
+ inflateBack() and perform their own processing of the gzip header and
+ trailer.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
been reached and all uncompressed output has been produced, Z_NEED_DICT if a
preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect
- adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
- (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if no progress is possible or if there was not
- enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
- case, the application may then call inflateSync to look for a good
- compression block.
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may then
+ call inflateSync() to look for a good compression block if a partial recovery
+ of the data is desired.
*/
@@ -547,16 +594,36 @@ extern int inflateInit2 (z_streamp strm, int windowBits);
The windowBits parameter is the base two logarithm of the maximum window
size (the size of the history buffer). It should be in the range 8..15 for
this version of the library. The default value is 15 if inflateInit is used
- instead. If a compressed stream with a larger window size is given as
- input, inflate() will return with the error code Z_DATA_ERROR instead of
- trying to allocate a larger window.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is
+ a crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+ is set to null if there is no error message. inflateInit2 does not perform
+ any decompression apart from reading the zlib header if present: this will
+ be done by inflate(). (So next_in and avail_in may be modified, but next_out
+ and avail_out are unchanged.)
*/
extern int zlib_inflateSetDictionary (z_streamp strm,
@@ -564,16 +631,19 @@ extern int zlib_inflateSetDictionary (z_streamp strm,
uInt dictLength);
/*
Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate
- if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the Adler32 value returned by this call of
- inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (such as NULL dictionary) or the stream state is
inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). inflateSetDictionary does not
+ expected one (incorrect adler32 value). inflateSetDictionary does not
perform any decompression: this will be done by subsequent calls of
inflate().
*/
@@ -614,40 +684,19 @@ extern int zlib_inflateIncomp (z_stream *strm);
containing the data at next_in (except that the data is not output).
*/
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int zlib_deflateInit_ (z_streamp strm, int level,
- const char *version, int stream_size);
-extern int zlib_inflateInit_ (z_streamp strm,
- const char *version, int stream_size);
-extern int zlib_deflateInit2_ (z_streamp strm, int level, int method,
- int windowBits, int memLevel,
- int strategy, const char *version,
- int stream_size);
-extern int zlib_inflateInit2_ (z_streamp strm, int windowBits,
- const char *version, int stream_size);
#define zlib_deflateInit(strm, level) \
- zlib_deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+ zlib_deflateInit2((strm), (level), Z_DEFLATED, MAX_WBITS, \
+ DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY)
#define zlib_inflateInit(strm) \
- zlib_inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define zlib_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- zlib_deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define zlib_inflateInit2(strm, windowBits) \
- zlib_inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+ zlib_inflateInit2((strm), DEF_WBITS)
+extern int zlib_deflateInit2(z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy);
+extern int zlib_inflateInit2(z_streamp strm, int windowBits);
#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;}; /* hack for buggy compilers */
#endif
-extern const char * zlib_zError (int err);
-#if 0
-extern int zlib_inflateSyncPoint (z_streamp z);
-#endif
-extern const uLong * zlib_get_crc_table (void);
-
#endif /* _ZLIB_H */
diff --git a/include/linux/zutil.h b/include/linux/zutil.h
index ee0c59c..6adfa9a 100644
--- a/include/linux/zutil.h
+++ b/include/linux/zutil.h
@@ -23,18 +23,6 @@ typedef unsigned long ulg;
/* common constants */
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
#define STORED_BLOCK 0
#define STATIC_TREES 1
#define DYN_TREES 2
generated by cgit v1.1 at 2024-11-03 23:37:26 +0000