aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAgeFilesLines
...
| * usb-xhci: Handle COMP_TX_ERR for isoc tdsHans de Goede2012-06-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9c745995ae5c4ff787f34a359de908facc11ee00 upstream. While testing unplugging an UVC HD webcam with usb-redirection (so through usbdevfs), my userspace usb-redir code was getting a value of -1 in iso_frame_desc[n].status, which according to Documentation/usb/error-codes.txt is not a valid value. The source of this -1 is the default case in xhci-ring.c:process_isoc_td() adding a kprintf there showed the value of trb_comp_code to be COMP_TX_ERR in this case, so this patch adds handling for that completion code to process_isoc_td(). This was observed and tested with the following xhci controller: 1033:0194 NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Note: I also wonder if setting frame->status to -1 (-EPERM) is the best we can do, but since I cannot come up with anything better I've left that as is. This patch should be backported to kernels as old as 2.6.36, which contain the commit 04e51901dd44f40a5a385ced897f6bca87d5f40a "USB: xHCI: Isochronous transfer implementation". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Add Lynx Point to list of Intel switchable hosts.Sarah Sharp2012-06-012-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1c12443ab8eba71a658fae4572147e56d1f84f66 upstream. The upcoming Intel Lynx Point chipset includes an xHCI host controller that can have ports switched from the EHCI host controller, just like the Intel Panther Point xHCI host. This time, ports from both EHCI hosts can be switched to the xHCI host controller. The PCI config registers to do the port switching are in the exact same place in the xHCI PCI configuration registers, with the same semantics. Hooray for shipping patches for next-gen hardware before the current gen hardware is even available for purchase! This patch should be backported to stable kernels as old as 3.0, that contain commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | merge opensource jb u5codeworkx2012-09-226-36/+260
| | | | | | | | Change-Id: I1aaec157aa196f3448eff8636134fce89a814cf2
* | Merge linux-3.0.31 from korg into jellybeancodeworkx2012-09-1818-105/+147
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mm/proc-v7.S drivers/base/core.c drivers/gpu/drm/i915/i915_gem_execbuffer.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_lvds.c drivers/gpu/drm/radeon/evergreen.c drivers/gpu/drm/radeon/r100.c drivers/gpu/drm/radeon/radeon_connectors.c drivers/gpu/drm/radeon/rs600.c drivers/usb/core/hub.c drivers/usb/host/xhci-pci.c drivers/usb/host/xhci.c drivers/usb/serial/qcserial.c fs/proc/base.c Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772
| * USB: EHCI: fix crash during suspend on ASUS computersAlan Stern2012-05-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 151b61284776be2d6f02d48c23c3625678960b97 upstream. This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Oleksij Rempel (fishor) <bug-track@fisher-privat.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "usb: Fix build error due to dma_mask is not at pdev_archdata at ARM"Greg Kroah-Hartman2012-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit d39514c14bd941232976b68e2750dc725b90e724 which is e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream as it causes oopses on some ppc systems. Reported-by: Chen Peter-B29397 <B29397@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * EHCI: fix criterion for resuming the root hubAlan Stern2012-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dc75ce9d929aabeb0843a6b1a4ab320e58ba1597 upstream. This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
| * EHCI: always clear the STS_FLR status bitAlan Stern2012-04-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2fbe2bf1fd37f9d99950bd8d8093623cf22cf08b upstream. This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Fix register save/restore order.Sarah Sharp2012-04-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c7713e736526d8c9f6f87716fb90562a8ffaff2c upstream. The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering that the xHCI registers are saved and restored in. It moves the interrupt pending (IMAN) and interrupt control (IMOD) registers to be saved and restored last. I believe that's because the host controller may attempt to fetch the event ring table when interrupts are re-enabled. Therefore we need to restore the event ring registers before we re-enable interrupts. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI hostElric Fu2012-04-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 457a4f61f9bfc3ae76e5b49f30f25d86bb696f67 upstream. The suspend operation of VIA xHCI host have some issues and hibernate operation works fine, so The XHCI_RESET_ON_RESUME quirk is added for it. This patch should base on "xHCI: Don't write zeroed pointer to xHC registers" that is released by Sarah. Otherwise, the host system error will ocurr in the hibernate operation process. This should be backported to stable kernels as old as 2.6.37, that contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMIAlex He2012-04-222-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 95018a53f7653e791bba1f54c8d75d9cb700d1bd upstream. Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable bits will be cleared to zero and flag bits 29:31 are also cleared to zero. Other bits should be presvered as Table 146. This patch should be backported to kernels as old as 2.6.31. Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Restore event ring dequeue pointer on resume.Sarah Sharp2012-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit fb3d85bc7193f23c9a564502df95564c49a32c91 upstream. The xhci_save_registers() function saved the event ring dequeue pointer in the s3 register structure, but xhci_restore_registers() never restored it. No other code in the xHCI successful resume path would ever restore it either. Fix that. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Don't write zeroed pointers to xHC registers.Sarah Sharp2012-04-221-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 159e1fcc9a60fc7daba23ee8fcdb99799de3fe84 upstream. When xhci_mem_cleanup() is called, we can't be sure if the xHC is actually halted. We can ask the xHC to halt by writing to the RUN bit in the command register, but that might timeout due to a HW hang. If the host controller is still running, we should not write zeroed values to the event ring dequeue pointers or base tables, the DCBAA pointers, or the command ring pointers. Eric Fu reports his VIA VL800 host accesses the event ring pointers after a failed register restore on resume from suspend. The hypothesis is that the host never actually halted before the register write to change the event ring pointer to zero. Remove all writes of zeroed values to pointer registers in xhci_mem_cleanup(). Instead, make all callers of the function reset the host controller first, which will reset those registers to zero. xhci_mem_init() is the only caller that doesn't first halt and reset the host controller before calling xhci_mem_cleanup(). This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: don't re-enable IE constantlyFelipe Balbi2012-04-222-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4e833c0b87a30798e67f06120cecebef6ee9644c upstream. While we're at that, define IMAN bitfield to aid readability. The interrupt enable bit should be set once on driver init, and we shouldn't need to continually re-enable it. Commit c21599a3 introduced a read of the irq_pending register, and that allows us to preserve the state of the IE bit. Before that commit, we were blindly writing 0x3 to the register. This patch should be backported to kernels as old as 2.6.36, or ones that contain the commit c21599a36165dbc78b380846b254017a548b9de5 "USB: xhci: Reduce reads and writes of interrupter registers". Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: Fix build error due to dma_mask is not at pdev_archdata at ARMPeter Chen2012-04-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream. When build i.mx platform with imx_v6_v7_defconfig, and after adding USB Gadget support, it has below build error: CC drivers/usb/host/fsl-mph-dr-of.o drivers/usb/host/fsl-mph-dr-of.c: In function 'fsl_usb2_device_register': drivers/usb/host/fsl-mph-dr-of.c:97: error: 'struct pdev_archdata' has no member named 'dma_mask' It has discussed at: http://www.spinics.net/lists/linux-usb/msg57302.html For PowerPC, there is dma_mask at struct pdev_archdata, but there is no dma_mask at struct pdev_archdata for ARM. The pdev_archdata is related to specific platform, it should NOT be accessed by cross platform drivers, like USB. The code for pdev_archdata should be useless, as for PowerPC, it has already gotten the value for pdev->dev.dma_mask at function arch_setup_pdev_archdata of arch/powerpc/kernel/setup-common.c. Tested-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * powerpc/usb: fix bug of kernel hang when initializing usbShengzhou Liu2012-04-022-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | commit 28c56ea1431421dec51b7b229369e991481453df upstream. If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Don't fail USB3 probe on missing legacy PCI IRQ.Sarah Sharp2012-02-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 68d07f64b8a11a852d48d1b05b724c3e20c0d94b upstream Intel has a PCI USB xhci host controller on a new platform. It doesn't have a line IRQ definition in BIOS. The Linux driver refuses to initialize this controller, but Windows works well because it only depends on MSI. Actually, Linux also can work for MSI. This patch avoids the line IRQ checking for USB3 HCDs in usb core PCI probe. It allows the xHCI driver to try to enable MSI or MSI-X first. It will fail the probe if MSI enabling failed and there's no legacy PCI IRQ. This patch should be backported to kernels as old as 2.6.32. [Maintainer note: This patch is a backport of commit 68d07f64b8a11a852d48d1b05b724c3e20c0d94b "USB: Don't fail USB3 probe on missing legacy PCI IRQ." to the 3.0 kernel. Note, the original patch description was wrong. We should not back port this to kernels older than 2.6.36, since that was the first kernel to support MSI and MSI-X for xHCI hosts. These systems will just not work without MSI support, so the probe should fail on kernels older than 2.6.36.] Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Fix encoding for HS bulk/control NAK rate.Sarah Sharp2012-02-291-8/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 340a3504fd39dad753ba908fb6f894ee81fc3ae2 upstream. The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must be encoded as an exponent of two number of microframes. The endpoint descriptor has the NAK rate encoded in number of microframes. We were just copying the value from the endpoint descriptor into the endpoint context interval field, which was not correct. This lead to the VIA host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass storage device. The fix is to use the correct encoding. Refactor the code to convert number of frames to an exponential number of microframes, and make sure we convert the number of microframes in HS bulk and control endpoints to an exponent. This should be back ported to kernels as old as 2.6.31, that contain the commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Felipe Contreras <felipe.contreras@gmail.com> Suggested-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Fix oops caused by more USB2 ports than USB3 ports.Sarah Sharp2012-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3278a55a1aebe2bbd47fbb5196209e5326a88b56 upstream. The code to set the device removable bits in the USB 2.0 roothub descriptor was accidentally looking at the USB 3.0 port registers instead of the USB 2.0 registers. This can cause an oops if there are more USB 2.0 registers than USB 3.0 registers. This should be backported to kernels as old as 2.6.39, that contain the commit 4bbb0ace9a3de8392527e3c87926309d541d3b00 "xhci: Return a USB 3.0 hub descriptor for USB3 roothub." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Fix handoff when BIOS disables host PCI device.Sarah Sharp2012-02-291-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cab928ee1f221c9cc48d6615070fefe2e444384a upstream. On some systems with an Intel Panther Point xHCI host controller, the BIOS disables the xHCI PCI device during boot, and switches the xHCI ports over to EHCI. This allows the BIOS to access USB devices without having xHCI support. The downside is that the xHCI BIOS handoff mechanism will fail because memory mapped I/O is not enabled for the disabled PCI device. Jesse Barnes says this is expected behavior. The PCI core will enable BARs before quirks run, but it will leave it in an undefined state, and it may not have memory mapped I/O enabled. Make the generic USB quirk handler call pci_enable_device() to re-enable MMIO, and call pci_disable_device() once the host-specific BIOS handoff is finished. This will balance the ref counts in the PCI core. When the PCI probe function is called, usb_hcd_pci_probe() will call pci_enable_device() again. This should be back ported to kernels as old as 2.6.31. That was the first kernel with xHCI support, and no one has complained about BIOS handoffs failing due to memory mapped I/O being disabled on other hosts (EHCI, UHCI, or OHCI). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: Skip PCI USB quirk handling for Netlogic XLPJayachandran C2012-02-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e4436a7c17ac2b5e138f93f83a541cba9b311685 upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xHCI: Cleanup isoc transfer ring when TD length mismatch foundAndiry Xu2012-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cf840551a884360841bd3d3ce1ad0868ff0b759a upstream. When a TD length mismatch is found during isoc TRB enqueue, it directly returns -EINVAL. However, isoc transfer is partially enqueued at this time, and the ring should be cleared. This should be backported to kernels as old as 2.6.36, which contain the commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed enqueue in the middle of isoch TD." Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Fix USB 3.0 device restart on resume.Sarah Sharp2012-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d0cd5d482b8a6dc92c6c69a5387baf72ea84f23a upstream. The xHCI hub port code gets passed a zero-based port number by the USB core. It then adds one to in order to find a device slot by port number and device speed by calling xhci_find_slot_id_by_port. That function clearly states it requires a one-based port number. The xHCI port status change event handler was using a zero-based port number that it got from find_faked_portnum_from_hw_portnum, not a one-based port number. This lead to the doorbells never being rung for a device after a resume, or worse, a different device with the same speed having its doorbell rung (which could lead to bad power management in the xHCI host controller). This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * drivers/usb/host/ehci-fsl.c: add missing iounmapJulia Lawall2012-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2492c6e6454ff3edb11e273b071a6ea80a199c71 upstream. Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * OHCI: final fix for NVIDIA problems (I hope)Alan Stern2012-01-124-64/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c61875977458637226ab093a35d200f2d5789787 upstream. Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Arno Augustin <Arno.Augustin@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: ch9: fix up MaxStreams helperFelipe Balbi2012-01-121-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 18b7ede5f7ee2092aedcb578d3ac30bd5d4fc23c upstream. [ removed the dwc3 portion of the patch as it didn't apply to older kernels - gregkh] According to USB 3.0 Specification Table 9-22, if bmAttributes [4:0] are set to zero, it means "no streams supported", but the way this helper was defined on Linux, we will *always* have one stream which might cause several problems. For example on DWC3, we would tell the controller endpoint has streams enabled and yet start transfers with Stream ID set to 0, which would goof up the host side. While doing that, convert the macro to an inline function due to the different checks we now need. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * xhci: Properly handle COMP_2ND_BW_ERRHans de Goede2012-01-122-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 71d85724bdd947a3b42a88d08af79f290a1a767b upstream. I encountered a result of COMP_2ND_BW_ERR while improving how the pwc webcam driver handles not having the full usb1 bandwidth available to itself. I created the following test setup, a NEC xhci controller with a single TT USB 2 hub plugged into it, with a usb keyboard and a pwc webcam plugged into the usb2 hub. This caused the following to show up in dmesg when trying to stream from the pwc camera at its highest alt setting: xhci_hcd 0000:01:00.0: ERROR: unexpected command completion code 0x23. usb 6-2.1: Not enough bandwidth for altsetting 9 And usb_set_interface returned -EINVAL, which caused my pwc code to not do the right thing as it expected -ENOSPC. This patch makes the xhci driver properly handle COMP_2ND_BW_ERR and makes usb_set_interface return -ENOSPC as expected. This should be backported to stable kernels as old as 2.6.32. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: fix number of mapped SG DMA entriesClemens Ladisch2012-01-124-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bc677d5b64644c399cd3db6a905453e611f402ab upstream. Add a new field num_mapped_sgs to struct urb so that we have a place to store the number of mapped entries and can also retain the original value of entries in num_sgs. Previously, usb_hcd_map_urb_for_dma() would overwrite this with the number of mapped entries, which would break dma_unmap_sg() because it requires the original number of entries. This fixes warnings like the following when using USB storage devices: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695() ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1] Modules linked in: ohci_hcd ehci_hcd Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319 Call Trace: <IRQ> [<ffffffff81036d3b>] warn_slowpath_common+0x80/0x98 [<ffffffff81036de7>] warn_slowpath_fmt+0x41/0x43 [<ffffffff811fa5ae>] check_unmap+0x4e4/0x695 [<ffffffff8105e92c>] ? trace_hardirqs_off+0xd/0xf [<ffffffff8147208b>] ? _raw_spin_unlock_irqrestore+0x33/0x50 [<ffffffff811fa84a>] debug_dma_unmap_sg+0xeb/0x117 [<ffffffff8137b02f>] usb_hcd_unmap_urb_for_dma+0x71/0x188 [<ffffffff8137b166>] unmap_urb_for_dma+0x20/0x22 [<ffffffff8137b1c5>] usb_hcd_giveback_urb+0x5d/0xc0 [<ffffffffa0000d02>] ehci_urb_done+0xf7/0x10c [ehci_hcd] [<ffffffffa0001140>] qh_completions+0x429/0x4bd [ehci_hcd] [<ffffffffa000340a>] ehci_work+0x95/0x9c0 [ehci_hcd] ... ---[ end trace f29ac88a5a48c580 ]--- Mapped at: [<ffffffff811faac4>] debug_dma_map_sg+0x45/0x139 [<ffffffff8137bc0b>] usb_hcd_map_urb_for_dma+0x22e/0x478 [<ffffffff8137c494>] usb_hcd_submit_urb+0x63f/0x6fa [<ffffffff8137d01c>] usb_submit_urb+0x2c7/0x2de [<ffffffff8137dcd4>] usb_sg_wait+0x55/0x161 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | samsung update 1codeworkx2012-06-0240-175/+11918
|/
* xHCI: fix bug in xhci_clear_command_ring()Andiry Xu2011-12-091-1/+4
| | | | | | | | | | | | | | | | | | | | | | commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 upstream. When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI : Fix a regression in the ISO schedulerMatthieu CASTET2011-12-091-4/+5
| | | | | | | | | | | | | | | | | commit e3420901eba65b1c46bed86d360e3a8685d20734 upstream. Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin2011-12-091-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: whci-hcd: fix endian conversion in qset_clear()Dan Carpenter2011-12-091-1/+1
| | | | | | | | | | | commit 8746c83d538cab273d335acb2be226d096f4a5af upstream. qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: EHCI: fix HUB TT scheduling issue with iso transfer"Greg Kroah-Hartman2011-11-291-10/+5
| | | | | | | | | This reverts commit 317451c11fefcb0e05383f0a0080bb7f5445cfcf. Cc: Matthieu Castet <matthieu.castet@parrot.com> Cc: Thomas Poussevin <thomas.poussevin@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin2011-11-261-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: workaround for bug in old version of GCCAlan Stern2011-11-261-4/+3
| | | | | | | | | | | | | | | | | | commit 97ff22ee3b4cb3a334f7385e269773141aed702f upstream. This patch (as1491) works around a bug in GCC-3.4.6, which is still supposed to be supported. The number of microseconds in the udelay() call in quirk_usb_disable_ehci() is fixed at 100, but the compiler doesn't understand this and generates a link-time error. So we replace the otherwise unused variable "delta" with a simple constant 100. This same pattern is already used in other delay loops in that source file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Konrad Rzepecki <krzepecki@dentonet.pl> Tested-by: Konrad Rzepecki <krzepecki@dentonet.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: XHCI: resume root hubs when the controller resumesAlan Stern2011-11-261-15/+14
| | | | | | | | | | | | | | | | | | | | | | | | | commit f69e3120df82391a0ee8118e0a156239a06b2afb upstream. This patch (as1494) fixes a problem in xhci-hcd's resume routine. When the controller is runtime-resumed, this can only mean that one of the two root hubs has made a wakeup request and therefore needs to be resumed as well. Rather than try to determine which root hub requires attention (which might be difficult in the case where a new non-SuperSpeed device has been plugged in), the patch simply resumes both root hubs. Without this change, there is a race: The controller might be put back to sleep before it can activate its IRQ line, and the wakeup condition might never get handled. The patch also simplifies the logic in xhci_resume a little, combining some repeated flag settings into a single pair of statements. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb, xhci: fix lockdep warning on endpoint timeoutDon Zickus2011-11-261-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f43d623164022dcbf6750ef220b7a1133a1183eb upstream. While debugging a usb3 problem, I stumbled upon this lockdep warning. Oct 18 21:41:17 dhcp47-74 kernel: ================================= Oct 18 21:41:17 dhcp47-74 kernel: [ INFO: inconsistent lock state ] Oct 18 21:41:17 dhcp47-74 kernel: 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: --------------------------------- Oct 18 21:41:17 dhcp47-74 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Oct 18 21:41:17 dhcp47-74 kernel: swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: Oct 18 21:41:17 dhcp47-74 kernel: (&(&xhci->lock)->rlock){?.-...}, at: [<ffffffffa0228990>] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: {IN-HARDIRQ-W} state was registered at: Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109a941>] __lock_acquire+0x781/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109bed7>] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81501b46>] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa02299fa>] xhci_irq+0x3a/0x1960 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa022b351>] xhci_msi_irq+0x31/0x40 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810d2305>] handle_irq_event_percpu+0x85/0x320 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810d25e8>] handle_irq_event+0x48/0x70 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810d537d>] handle_edge_irq+0x6d/0x130 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810048c9>] handle_irq+0x49/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150d56d>] do_IRQ+0x5d/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff815029b0>] ret_from_intr+0x0/0x13 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81388aca>] usb_set_device_state+0x8a/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8138f038>] usb_add_hcd+0x2b8/0x730 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa022ed7e>] xhci_pci_probe+0x9e/0xd4 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8127915f>] local_pci_probe+0x5f/0xd0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8127a569>] pci_device_probe+0x119/0x120 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81334473>] driver_probe_device+0xa3/0x2c0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8133473b>] __driver_attach+0xab/0xb0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8133373c>] bus_for_each_dev+0x6c/0xa0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff813341fe>] driver_attach+0x1e/0x20 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81333b88>] bus_add_driver+0x1f8/0x2b0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81334df6>] driver_register+0x76/0x140 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8127a7c6>] __pci_register_driver+0x66/0xe0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa013c04a>] snd_timer_find+0x4a/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa013c00e>] snd_timer_find+0xe/0x70 [snd_timer] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810001d3>] do_one_initcall+0x43/0x180 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810a9ed2>] sys_init_module+0x92/0x1f0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150ab6b>] system_call_fastpath+0x16/0x1b Oct 18 21:41:17 dhcp47-74 kernel: irq event stamp: 631984 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last enabled at (631984): [<ffffffff81502720>] _raw_spin_unlock_irq+0x30/0x50 Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last disabled at (631983): [<ffffffff81501c49>] _raw_spin_lock_irq+0x19/0x90 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last enabled at (631980): [<ffffffff8105ff63>] _local_bh_enable+0x13/0x20 Oct 18 21:41:17 dhcp47-74 kernel: softirqs last disabled at (631981): [<ffffffff8150ce6c>] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: other info that might help us debug this: Oct 18 21:41:17 dhcp47-74 kernel: Possible unsafe locking scenario: Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: CPU0 Oct 18 21:41:17 dhcp47-74 kernel: ---- Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: <Interrupt> Oct 18 21:41:17 dhcp47-74 kernel: lock(&(&xhci->lock)->rlock); Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: *** DEADLOCK *** Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: 1 lock held by swapper/0: Oct 18 21:41:17 dhcp47-74 kernel: #0: (&ep->stop_cmd_timer){+.-...}, at: [<ffffffff8106abf2>] run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: Oct 18 21:41:17 dhcp47-74 kernel: stack backtrace: Oct 18 21:41:17 dhcp47-74 kernel: Pid: 0, comm: swapper Tainted: G W 3.1.0-rc4nmi+ #456 Oct 18 21:41:17 dhcp47-74 kernel: Call Trace: Oct 18 21:41:17 dhcp47-74 kernel: <IRQ> [<ffffffff81098ed7>] print_usage_bug+0x227/0x270 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810999c6>] mark_lock+0x346/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109a7de>] __lock_acquire+0x61e/0x1660 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81099893>] ? mark_lock+0x213/0x410 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109bed7>] lock_acquire+0x97/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81501b46>] _raw_spin_lock+0x46/0x80 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106abf2>] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106ac9d>] run_timer_softirq+0x20d/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106abf2>] ? run_timer_softirq+0x162/0x570 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228960>] ? xhci_queue_isoc_tx_prepare+0x8e0/0x8e0 [xhci_hcd] Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810604d2>] __do_softirq+0xf2/0x3f0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81020edd>] ? lapic_next_event+0x1d/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81090d4e>] ? clockevents_program_event+0x5e/0x90 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150ce6c>] call_softirq+0x1c/0x30 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8100484d>] do_softirq+0x8d/0xc0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8105ff35>] irq_exit+0xe5/0x100 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150d65e>] smp_apic_timer_interrupt+0x6e/0x99 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150b6f0>] apic_timer_interrupt+0x70/0x80 Oct 18 21:41:17 dhcp47-74 kernel: <EOI> [<ffffffff81095d8d>] ? trace_hardirqs_off+0xd/0x10 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff812ddb76>] ? acpi_idle_enter_bm+0x227/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff812ddb71>] ? acpi_idle_enter_bm+0x222/0x25b Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff813eda63>] cpuidle_idle_call+0x103/0x290 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81002155>] cpu_idle+0xe5/0x160 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff814e7f50>] rest_init+0xe0/0xf0 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff814e7e70>] ? csum_partial_copy_generic+0x170/0x170 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8e23>] start_kernel+0x3fc/0x407 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8321>] x86_64_start_reservations+0x131/0x135 Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8412>] x86_64_start_kernel+0xed/0xf4 Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: Assuming host is dying, halting host. Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: HC died; cleaning up Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -110 Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -22 Oct 18 21:41:17 dhcp47-74 kernel: hub 3-0:1.0: cannot disable port 4 (err = -19) Basically what is happening is in xhci_stop_endpoint_command_watchdog() the xhci->lock is grabbed with just spin_lock. What lockdep deduces is that if an interrupt occurred while in this function it would deadlock with xhci_irq because that function also grabs the xhci->lock. Fixing it is trivial by using spin_lock_irqsave instead. This should be queued to stable kernels as far back as 2.6.33. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xhci: Set slot and ep0 flags for address command.Sarah Sharp2011-11-262-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d31c285b3a71cf9056e6a060de41f37780b0af86 upstream. Matt's AsMedia xHCI host controller was responding with a Context Error to an address device command after a configured device reset. Some sequence of events leads both the slot and endpoint zero add flags cleared to zero, which the AsMedia host doesn't like: [ 223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags [ 223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags [ 223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0] [ 223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1] [ 223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2] [ 223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3] [ 223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4] [ 223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5] [ 223.701858] xhci_hcd 0000:03:00.0: Slot Context: [ 223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info [ 223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2 [ 223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info [ 223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state [ 223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0] [ 223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1] [ 223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2] [ 223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3] [ 223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context: [ 223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info [ 223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2 [ 223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq [ 223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info [ 223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0] [ 223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1] [ 223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2] ... [ 223.701927] xhci_hcd 0000:03:00.0: // Ding dong! [ 223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1. The xHCI spec says that both flags must be set to one for the Address Device command. When the device is first enumerated, xhci_setup_addressable_virt_dev() does set those flags. However, when the device is addressed after it has been reset in the configured state, xhci_setup_addressable_virt_dev() is not called, and xhci_copy_ep0_dequeue_into_input_ctx() is called instead. That function relies on the flags being set up by previous commands, which apparently isn't a good assumption. Move the setting of the flags into the common parent function. This should be queued for stable kernels as old as 2.6.35, since that was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Matt <mdm@iinet.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xHCI: Clear PLC for USB2 root hub portsAndiry Xu2011-11-111-0/+4
| | | | | | | | | | | | | | | | | | commit 6fd4562178508a0949c9fdecd8558d8b10d671bd upstream. When the link state changes, xHC will report a port status change event and set the PORT_PLC bit, for both USB3 and USB2 root hub ports. The PLC will be cleared by usbcore for USB3 root hub ports, but not for USB2 ports, because they do not report USB_PORT_STAT_C_LINK_STATE in wPortChange. Clear it for USB2 root hub ports in handle_port_status(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xHCI: test and clear RWC bitAndiry Xu2011-11-113-10/+20
| | | | | | | | | | | commit d2f52c9e585bbb1a3c164e02b8dcd0d996c67353 upstream. Introduce xhci_test_and_clear_bit() to clear RWC bit in PORTSC register. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xhci: If no endpoints changed, don't issue BW command.Sarah Sharp2011-11-111-0/+6
| | | | | | | | | | | | | | | | | | | | | commit 2dc3753997f3c80ce8b950242ab9bb3fb936acfd upstream. Some alternate interface settings have no endpoints associated with them. This shows up in some USB webcams, particularly the Logitech HD 1080p, which uses the uvcvideo driver. If a driver switches between two alt settings with no endpoints, there is no need to issue a configure endpoint command, because there is no endpoint information to update. The only time a configure endpoint command with just the add slot flag set makes sense is when the driver is updating hub characteristics in the slot context. However, that code never calls xhci_check_bandwidth, so we should be safe not issuing a command if only the slot context add flag is set. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xHCI: prevent infinite loop when processing MSE eventAndiry Xu2011-11-111-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c2d7b49f42f50d7fc5cbfd195b785a128723fdf4 upstream. When a xHC host is unable to handle isochronous transfer in the interval, it reports a Missed Service Error event and skips some tds. Currently xhci driver handles MSE event in the following ways: 1. When encounter a MSE event, set ep->skip flag, update event ring dequeue pointer and return. 2. When encounter the next event on this ep, the driver will run the do-while loop, fetch td from ep's td_list to find the td corresponding to this event. All tds missed are marked as short transfer(-EXDEV). The do-while loop will end in two ways: 1. If the td pointed by the event trb is found; 2. If the ep ring's td_list is empty. However, if a buggy HW reports some unpredicted event (for example, an overrun event following a MSE event while the ep ring is actually not empty), the driver will never find the td, and it will loop until the td_list is empty. Unfortunately, the spinlock is dropped when give back a urb in the do-while loop. During the spinlock released period, the class driver may still submit urbs and add tds to the td_list. This may cause disaster, since the td_list will never be empty and the loop never ends, and the system hangs. To fix this, count the number of TDs on the ep ring before skipping TDs, and quit the loop when skipped that number of tds. This guarantees the do-while loop will end after certain number of cycles, and driver will not be trapped in an infinite loop. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlinkArvid Brodin2011-11-111-0/+3
| | | | | | | | commit 17d3e145a4ad680b3d1b1c30d0696a5bbb2b65c4 upstream. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: Fix test mode sequenceBoris Todorov2011-11-111-0/+12
| | | | | | | | | | | | | commit 77636c86a600b83de01719efad83567e46d7e8ce upstream. The sequence to put port in test mode is not complete. According EHCI specification all enabled ports must be put in suspend. Signed-off-by: Boris Todorov <boris.st.todorov@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* QE/FHCI: fixed the CONTROL bugJerry Huang2011-11-111-4/+15
| | | | | | | | | | | commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream. For USB CONTROL transaction, when the data length is zero, the IN package is needed to finish this transaction in status stage. Signed-off-by: Jerry Huang <r66093@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix runtime wakeup on OHCIMatthew Garrett2011-11-111-4/+1
| | | | | | | | | | | | | | | | | | commit a8b43c00ef06aec49b9fe0a5bad8a6a320e4d27b upstream. At least some OHCI hardware (such as the MCP89) fails to flag any change in the host status register or the port status registers when receiving a remote wakeup while in D3 state. This results in the controller being resumed but no device state change being noticed, at which point the controller is put back to sleep again. Since there doesn't seem to be any reliable way to identify the state change, just unconditionally resume the hub. It'll be put back to sleep in the near future anyway if there are no active devices attached to it. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xHCI: AMD isoc link TRB chain bit quirkAndiry Xu2011-11-114-38/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7e393a834b41001174a8fb3ae3bc23a749467760 upstream. Setting the chain (CH) bit in the link TRB of isochronous transfer rings is required by AMD 0.96 xHCI host controller to successfully transverse multi-TRB TD that span through different memory segments. When a Missed Service Error event occurs, if the chain bit is not set in the link TRB and the host skips TDs which just across a link TRB, the host may falsely recognize the link TRB as a normal TRB. You can see this may cause big trouble - the host does not jump to the right address which is pointed by the link TRB, but continue fetching the memory which is after the link TRB address, which may not even belong to the host, and the result cannot be predicted. This causes some big problems. Without the former patch I sent: "xHCI: prevent infinite loop when processing MSE event", the system may hang. With that patch applied, system does not hang, but the host still access wrong memory address and isoc transfer will fail. With this patch, isochronous transfer works as expected. This patch should be applied to kernels as old as 2.6.36, which was when the first isochronous support was added for the xHCI host controller. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* xhci-mem.c: Check for ring->first_seg != NULLKautuk Consul2011-11-111-10/+12
| | | | | | | | | | | | | | | | | | | | commit 0e6c7f746ea99089fb3263709075c20485a479ae upstream. There are 2 situations wherein the xhci_ring* might not get freed: - When xhci_ring_alloc() -> xhci_segment_alloc() returns NULL and we goto the fail: label in xhci_ring_alloc. In this case, the ring will not get kfreed. - When the num_segs argument to xhci_ring_alloc is passed as 0 and we try to free the rung after that. ( This doesn't really happen as of now in the code but we seem to be entertaining num_segs=0 in xhci_ring_alloc ) This should be backported to kernels as old as 2.6.31. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: workaround for MosChip controller bugAlan Stern2011-11-115-8/+49
| | | | | | | | | | | | | | | | | | | | | commit 68aa95d5d4de31c9348c1628ffa85c805305ebc5 upstream. This patch (as1489) works around a hardware bug in MosChip EHCI controllers. Evidently when one of these controllers increments the frame-index register, it changes the three low-order bits (the microframe counter) before changing the higher order bits (the frame counter). If the register is read at just the wrong time, the value obtained is too low by 8. When the appropriate quirk flag is set, we work around this problem by reading the frame-index register a second time if the first value's three low-order bits are all 0. This gives the hardware a chance to finish updating the register, yielding the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jason N Pitt <jpitt@fhcrc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.1 at 2025-08-22 13:55:34 +0000