aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | USB: s3c-hsudc: use IS_ERR() instead of NULL checkJingoo Han2011-05-131-2/+2
| |/ / | | | | | | | | | | | | | | | | | | clk_get() returns ERR_PTR() on error, not NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | xhci: move the common code to a function to get max ports and port arrayhuajun li2011-05-121-39/+27
| | | | | | | | | | | | | | | | | | | | | | | | There are several functions using same code to get max ports and port array, this patch moves the common code to a function in order to reuse them easily. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | ehci: workaround for pci quirk timeout on ExoPCAndy Ross2011-05-121-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | The BIOS handoff for the unused EHCI controller on the ExoPC tablet hangs for 90 seconds on boot. Detect that device, skip negotiation and force the handoff. Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | ehci: pci quirk cleanupAndy Ross2011-05-121-70/+66
| | | | | | | | | | | | | | | | | | | | | Factor the handoff code out from quirk_usb_disable_ehci Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge branch 'for-usb-next' of ↵Greg Kroah-Hartman2011-05-121-9/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next * 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: xhci: Fix bug in control transfer cancellation.
| | * | xhci: Fix bug in control transfer cancellation.Sarah Sharp2011-05-111-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the xHCI driver attempts to cancel a transfer, it issues a Stop Endpoint command and waits for the host controller to indicate which TRB it was in the middle of processing. The host will put an event TRB with completion code COMP_STOP on the event ring if it stops on a control transfer TRB (or other types of transfer TRBs). The ring handling code is supposed to set ep->stopped_trb to the TRB that the host stopped on when this happens. Unfortunately, there is a long-standing bug in the control transfer completion code. It doesn't actually check to see if COMP_STOP is set before attempting to process the transfer based on which part of the control TD completed. So when we get an event on the data phase of the control TRB with COMP_STOP set, it thinks it's a normal completion of the transfer and doesn't set ep->stopped_td or ep->stopped_trb. When the ring handling code goes on to process the completion of the Stop Endpoint command, it sees that ep->stopped_trb is not a part of the TD it's trying to cancel. It thinks the hardware has its enqueue pointer somewhere further up in the ring, and thinks it's safe to turn the control TRBs into no-op TRBs. Since the hardware was in the middle of the control TRBs to be cancelled, the proper software behavior is to issue a Set TR dequeue pointer command. It turns out that the NEC host controllers can handle active TRBs being set to no-op TRBs after a stop endpoint command, but other host controllers have issues with this out-of-spec software behavior. Fix this behavior. This patch should be backported to kernels as far back as 2.6.31, but it may be a bit challenging, since process_ctrl_td() was introduced in some refactoring done in 2.6.36, and some endian-safe patches added in 2.6.40 that touch the same lines. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable@kernel.org
| * | | usb: renesas_usbhs: fixup error processing on probe/removeKuninori Morimoto2011-05-111-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error processing order was wrong. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb: renesas_usbhs: fixup fifo disableKuninori Morimoto2011-05-111-16/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was necessary to check pipe condition after disable fifo. Current driver checked it in a wrong place. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: cdc_acm: Fix oops when Droids MuIn LCD is connectedErik Slagter2011-05-112-2/+12
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Droids MuIn LCD operates like a serial remote terminal. Data received are displayed directly on the LCD. This patch fixes the kernel null pointer oops when it is plugged in. Add NO_DATA_INTERFACE quirk to tell the driver that "control" and "data" interfaces are not separated for this device, which prevents dereferencing a null pointer in the device probe code. Signed-off-by: Erik Slagter <erik@slagter.name> Signed-off-by: Maxin B. John <maxin.john@gmail.com> Tested-by: Erik Slagter <erik@slagter.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driverThomas Abraham2011-05-104-0/+1375
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Samsung's S3C2416, S3C2443 and S3C2450 includes a USB High-Speed device controller module. This driver enables support for USB high-speed gadget functionality for the Samsung S3C24xx SoC's that include this controller. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Alexander Neumann <alexander@bumpern.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: gadget: Remove the LUN checks which are always trueMaxin B John2011-05-102-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Comparing an unsigned integer with greater than or equal to zero is always true. So, it is safe to remove similar checks from 'f_mass_storage.c' and 'file_storage.c' Signed-off-by: Maxin B. John <maxin.john@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: fix warning in usbtest module v2Greg Dietsche2011-05-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | On amd64 unsigned is not as wide as pointer and this causes a compiler warning. Switching to unsigned long corrects the problem. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ehci-s5p : use __devinit and __devexit macros for probe and removeJingoo Han2011-05-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The __devinit and __devexit macros were added to probe and remove functions. The macros move the probe and remove functions to the devinit and devexit sections Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: cp210x: fix typo, Telegesys should have been TelegesisFlorian Fainelli2011-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | CC: David Chalmers <david.chalmers@telegesis.com> Reported-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: gadget: f_mass_storage: Make us pass USBCV MSC Compliance testsRoger Quadros2011-05-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Defer the SET_CONFIG and SET_INTERFACE control transfer's data/status stages till we are ready to process new CBW from the host. This way we ensure that we don't loose any CBW during MSC compliance tests and cause lock up. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: gadget: composite: Allow function drivers to pause control transfersRoger Quadros2011-05-101-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB function drivers (e.g. f_mass_storage.c) need to delay or defer the data/status stages of standard control requests like SET_CONFIGURATION or SET_INTERFACE till they are done with their bookkeeping and are actually ready for accepting new commands to their interface. They can now achieve this functionality by returning USB_GADGET_DELAYED_STATUS in their setup handlers (e.g. set_alt()). The composite framework will then defer completion of the control transfer by not completing the data/status stages. This ensures that the host does not send new packets to the interface till the function driver is ready to take them. When the function driver that requested for USB_GADGET_DELAYED_STATUS is done with its bookkeeping, it should signal the composite framework to continue with the data/status stages of the control transfer. It can do so by invoking the new API usb_composite_setup_continue(). This is where the control transfer's data/status stages are completed and host can initiate new transfers. The DELAYED_STATUS mechanism is currently only supported if the expected data phase is 0 bytes (i.e. w_length == 0). Since SET_CONFIGURATION and SET_INTERFACE are the only cases that will use this mechanism, this is not a limitation. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge branch 'for-usb-next' of ↵Greg Kroah-Hartman2011-05-104-5/+45
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next * 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: xHCI 1.0: Max Exit Latency Too Large Error xHCI 1.0: TT_THINK_TIME set xHCI 1.0: Block Interrupts for Isoch transfer xHCI 1.0: Isoch endpoint CErr field set xHCI 1.0: Control endpoint average TRB length field set xHCI 1.0: Setup Stage TRB Transfer Type flag
| | * | xHCI 1.0: Max Exit Latency Too Large ErrorAlex He2011-05-092-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new TRB Completion Code of the xHCI spec 1.0. Asserted by the Evalute Context Command if the proposed Max Exit Latency would not allow the periodic endpoints of the Device Slot to be scheduled. Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI 1.0: TT_THINK_TIME setAndiry Xu2011-05-091-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI 1.0 spec says the TT Think Time field shall be set to zero if the device is not a High-speed hub. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI 1.0: Block Interrupts for Isoch transferAndiry Xu2011-05-092-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently an isoc URB is divided into multiple TDs, and every TD will trigger an interrupt when it's processed. However, software can schedule multiple TDs at a time, and it only needs an interrupt every URB. xHCI 1.0 introduces the Block Event Interrupt(BEI) flag which allows Normal and Isoch Transfer TRBs to place an Event TRB on an Event Ring but not assert an intrrupt to the host, and the interrupt rate is significantly reduced and the system performance is improved. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI 1.0: Isoch endpoint CErr field setAndiry Xu2011-05-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI 1.0 specification specifies that CErr does not apply to Isoch endpoints and shall be set to '0' for Isoch endpoints. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI 1.0: Control endpoint average TRB length field setAndiry Xu2011-05-091-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI 1.0 specification indicates that software should set Average TRB Length to '8' for control endpoints. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI 1.0: Setup Stage TRB Transfer Type flagAndiry Xu2011-05-092-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup Stage Transfer Type field is added to indicate the presence and the direction of the Data Stage TD, and determines the direction of the Status Stage TD so the wLength length field should be ignored by the xHC. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | Merge branch 2.6.39-rc7 into usb-linusGreg Kroah-Hartman2011-05-104-7/+40
| |\ \ \ | | |/ / | |/| / | | |/ | | | | | | | | | This was needed to resolve a conflict in: drivers/usb/host/isp1760-hcd.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Add PHY suspend support for MSM8960Pavankumar Kondeti2011-05-061-10/+54
| | | | | | | | | | | | | | | Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Configure PHY Analog and Digital voltage domainsAnji jonnala2011-05-061-0/+189
| | | | | | | | | | | | | | | | | | Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Implement charger detectionPavankumar Kondeti2011-05-062-4/+386
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: vote for dayatona fabric clockAnji jonnala2011-05-061-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HSUSB core clock is derived from daytona fabric clock and for HSUSB operational require minimum core clock at 55MHz. Since, HSUSB cannot tolerate daytona fabric clock change in the middle of HSUSB operational, vote for maximum Daytona fabric clock while usb is operational Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Add support for GRLIB GRUSBHC controllerJan Andersson2011-05-063-7/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the UHCI part of the GRLIB GRUSBHC controller found on some LEON/GRLIB SoCs. The UHCI HCD previously only supported controllers connected over PCI. This patch adds support for the first non-PCI UHCI HC. I have tried to replicate the solution used in ehci-hcd.c. Tested on GR-LEON4-ITX board (LEON4/GRLIB with GRUSBHC) and x86 with Intel UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Support non-PCI host controllersJan Andersson2011-05-063-0/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. This patch also extends the uhci_{read,write}* functions to allow accesses to registers not mapped into PCI I/O space. This extension also includes the addition of a void __iomem pointer to the uhci structure. A new Kconfig option is added to signal that the system has a non-PCI HC. If this Kconfig option is set, uhci-hcd.c will include generic reset functions for systems that do not make use of keyboard and mouse legacy support. PCI controllers will still always use the reset functions from pci-quirks This patch is followed by a patch that adds bus glue for the first non-PCI UHCI HC. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Wrap I/O register accessesJan Andersson2011-05-064-47/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch replaces in{b,w,l} and out{b,wl} with calls to local inline functions. This is done so that the register access functions can be extended to support register areas not mapped in PCI I/O space. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Move PCI specific functions to uhci-pci.cJan Andersson2011-05-062-294/+333
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch moves PCI specific functions to uhci-pci.c and includes this file in uhci-hcd.c. It also renames the function uhci_init to uhci_pci_init. uhci_init/uhci_pci_init is modified so that the port-detection logic is kept in a new separate function uhci_count_ports() in uhci-hcd.c. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Codingstyle fixesJan Andersson2011-05-061-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. This patch fixes the following warnings from checkpatch: ERROR: switch and case should be at the same indent + switch (to_pci_dev(uhci_dev(uhci))->vendor) { + default: [...] + case PCI_VENDOR_ID_GENESYS: [...] + case PCI_VENDOR_ID_INTEL: WARNING: static char array declaration should probably be static const char + static char bad_Asus_board[] = "A7V8X"; WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id +static const struct pci_device_id uhci_pci_ids[] = { { Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Allow dynamic assignment of bus specific functionsJan Andersson2011-05-062-19/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI controllers. This patch changes calls to uhci_reset_hc, uhci_check_and_reset_hc, configure_hc, resume_detect_interrupts_are_broken and global_suspend_mode_is_broken so that they are made through pointers in the uhci hcd struct. This will allow these functions to be replaced with bus/arch specific functions. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: UHCI: Remove PCI dependencies from uhci-hubJan Andersson2011-05-063-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of a series that extend the UHCI HCD to support non-PCI host controllers. uhci-hub.c contained two PCI vendor checks for silicon quirks. Move these checks into uhci-hcd.c and use bits in uhci_hcd structure to mark that we need to use the quirks. This patch is followed by other patches that will remove PCI dependencies from uhci-hcd.c as well. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | fsl/usb: Unused endpoint failure for USB gadgetRamneek Mehresh2011-05-061-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Though USB controller works without this most of the time, an issue was faced where USB was configured as printer device and it was dropping first packet(64 bytes) in full speed mode due to DATA PID mismatch. The problem gets resolved once unused endpoints are configured as bulk. As per P1020 RM (Table17-31, bits 19-18, bits 3-2) "When only one endpoint (RX or TX, but not both) of an endpoint pair is used, the unused endpoint should be configured as a bulk type endpoint." So according to the RM, this patch is initializing TX and RX endpoints as bulk type Signed-off-by: Suchit Lepcha <Suchit.Lepcha@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ohci-s3c2410: return proper error if clk_get failsJingoo Han2011-05-061-2/+2
| | | | | | | | | | | | | | | | | | | | | Return PTR_ERR(clk) instead of -ENOENT if clk_get fails Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ohci-s3c2410: fix checkpatch errors and warningsJingoo Han2011-05-061-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the checkpatch errors ans warnings listed below: ERROR: do not use assignment in if condition WARNING: line over 80 characters WARNING: braces {} are not necessary for single statement blocks WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ehci-au1xxx: fix suspend callbackManuel Lauss2011-05-061-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove a stray 'return 0' at the top of the suspend callback, and move au1xxx_stop_ehc() out of the ehci spinlock since it takes some time to complete. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: fix building musb driversAnatolij Gustschin2011-05-0611-72/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3dacdf11 "usb: factor out state_string() on otg drivers" broke building musb drivers since there is already another otg_state_string() function in musb drivers, but with different prototype. Fix musb drivers to use common otg_state_string(), too. Also provide a nop for otg_state_string() if CONFIG_USB_OTG_UTILS is not defined. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: Add bus glue for GRLIB GRUSBHC controllerJan Andersson2011-05-035-2/+253
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the GRLIB GRUSBHC EHCI controller from Aeroflex Gaisler. The controller is typically found on LEON/GRLIB SoCs. Tested on GR-LEON4-ITX with with little endian interface and on LEON3 system on GR-PCI-XC5V development board for big endian controller. Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: EHCI: Support controllers with big endian capability regsJan Andersson2011-05-0326-28/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: OTG: msm: Clear in_lpm flag before enabling the IRQ in resumePavankumar Kondeti2011-05-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code is clearing in_lpm flag after enabling the IRQ. If IRQ comes immediately before in_lpm flag is set, it thinks that hardware is in low power mode and disables the IRQ. Fix this by clearing in_lpm flag before enabling the IRQ. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Initialize ep0 once while registering gadget in ci13xxx_udcAnji jonnala2011-05-031-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the simulators may cache the ep0 maxpacket size to zero if the ep0 dQh is not setup before enabling the pullup. Hence Setup ep0 and initialize the dQh fields once while registering the gadget(before enabling the pullup). HSUSB Chipidea link controller spec says ep0 is enabled always in the HW. Hence disabling and enabling the ep0 as a part of reset interrupt is unneccesary. Remove the disable/enable ep0 logic from reset interrupt handling. Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Use ep0out for control OUT data phase in ci13xxx_udcPavankumar Kondeti2011-05-031-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | The current code queue the control OUT data request to ep0in instead of ep0out. Check ep0_dir and use the correct control endpoint. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Fix bug in endpoint feature request processing in ci13xxx_udcPavankumar Kondeti2011-05-031-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | The OUT endpoints are stored in 0 - hw_ep_max/2 and IN endpoints are stored from hw_ep_max/2 - hw_ep_max in ci13xxx_ep array. Retrieve the IN endpoint correctly while processing endpoint feature requests. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Fix unused variable warning in ci13xxx_udcPavankumar Kondeti2011-05-031-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Use bitwise AND operator to test flags in ci13xxx_udcPavankumar Kondeti2011-05-031-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gadget: Fix typo (s/EBUSY/-EBUSY) in ci13xxx_udcPavankumar Kondeti2011-05-031-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: gpio-vbus: ask for vbus_draw regulator before registering xceivDmitry Eremin-Solenikov2011-05-031-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Ask for vbus_draw regulator before registering tranceiver to disallow possible race between registration and set_power/etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.1 at 2025-01-27 17:51:05 +0000