aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv4
Commit message (Collapse)AuthorAgeFilesLines
* tcp: resets are misroutedAlexey Kuznetsov2012-10-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4c67525849e0b7f4bd4fab2487ec9e43ea52ef29 ] After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_nat_sip: fix via header translation with multiple parametersPatrick McHardy2012-10-211-2/+3
| | | | | | | | | | | | | | | | commit f22eb25cf5b1157b29ef88c793b71972efc47143 upstream. Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectationPablo Neira Ayuso2012-10-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3f509c689a07a4aa989b426893d8491a7ffcc410 upstream. We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by: Rafal Fitt <rafalf@aplusc.com.pl> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_ct_ipv4: packets with wrong ihl are invalidJozsef Kadlecsik2012-10-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 07153c6ec074257ade76a461429b567cff2b3a1e upstream. It was reported that the Linux kernel sometimes logs: klogd: [2629147.402413] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 447! klogd: [1072212.887368] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 392 ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in nf_conntrack_proto_tcp.c should catch malformed packets, so the errors at the indicated lines - TCP options parsing - should not happen. However, tcp_error() relies on the "dataoff" offset to the TCP header, calculated by ipv4_get_l4proto(). But ipv4_get_l4proto() does not check bogus ihl values in IPv4 packets, which then can slip through tcp_error() and get caught at the TCP options parsing routines. The patch fixes ipv4_get_l4proto() by invalidating packets with bogus ihl value. The patch closes netfilter bugzilla id 771. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: raw: fix icmp_filter()Eric Dumazet2012-10-131-6/+8
| | | | | | | | | | | | | | [ Upstream commit ab43ed8b7490cb387782423ecf74aeee7237e591 ] icmp_filter() should not modify its input, or else its caller would need to recompute ip_hdr() if skb->head is reallocated. Use skb_header_pointer() instead of pskb_may_pull() and change the prototype to make clear both sk and skb are const. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: flush DMA queue before sk_wait_data if rcv_wnd is zeroMichal Kubeček2012-10-131-2/+8
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 15c041759bfcd9ab0a4e43f1c16e2644977d0467 ] If recv() syscall is called for a TCP socket so that - IOAT DMA is used - MSG_WAITALL flag is used - requested length is bigger than sk_rcvbuf - enough data has already arrived to bring rcv_wnd to zero then when tcp_recvmsg() gets to calling sk_wait_data(), receive window can be still zero while sk_async_wait_queue exhausts enough space to keep it zero. As this queue isn't cleaned until the tcp_service_net_dma() call, sk_wait_data() cannot receive any data and blocks forever. If zero receive window and non-empty sk_async_wait_queue is detected before calling sk_wait_data(), process the queue first. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ipv4: ipmr_expire_timer causes crash when removing net namespaceFrancesco Ruggeri2012-10-021-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit acbb219d5f53821b2d0080d047800410c0420ea1 ] When tearing down a net namespace, ipv4 mr_table structures are freed without first deactivating their timers. This can result in a crash in run_timer_softirq. This patch mimics the corresponding behaviour in ipv6. Locking and synchronization seem to be adequate. We are about to kfree mrt, so existing code should already make sure that no other references to mrt are pending or can be created by incoming traffic. The functions invoked here do not cause new references to mrt or other race conditions to be created. Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive. Both ipmr_expire_process (whose completion we may have to wait in del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock or other synchronizations when needed, and they both only modify mrt. Tested in Linux 3.4.8. Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: Apply device TSO segment limit earlierBen Hutchings2012-10-023-11/+17
| | | | | | | | | | | | [ Upstream commit 1485348d2424e1131ea42efc033cbd9366462b01 ] Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: perform DMA to userspace only if there is a task waiting for itJiri Kosina2012-08-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 59ea33a68a9083ac98515e4861c00e71efdc49a1 ] Back in 2006, commit 1a2449a87b ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: Add TCP_USER_TIMEOUT negative value checkHangbin Liu2012-08-091-1/+4
| | | | | | | | | | | | | | [ Upstream commit 42493570100b91ef663c4c6f0c0fdab238f9d3c2 ] TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cipso: don't follow a NULL pointer when setsockopt() is calledPaul Moore2012-08-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 89d7ae34cdda4195809a5a987f697a517a2a3177 ] As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: drop SYN+FIN messagesEric Dumazet2012-07-191-0/+2
| | | | | | | | | | | | | | | | commit fdf5af0daf8019cec2396cdef8fb042d80fe71fa upstream. Denys Fedoryshchenko reported that SYN+FIN attacks were bringing his linux machines to their limits. Dont call conn_request() if the TCP flags includes SYN flag Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xfrm: take net hdr len into account for esp payload size calculationBenjamin Poirier2012-06-101-15/+9
| | | | | | | | | | | | | | | | [ Upstream commit 91657eafb64b4cb53ec3a2fbc4afc3497f735788 ] Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: fix the rcu race between free_fib_info and ip_route_output_slowYanmin Zhang2012-06-101-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e49cc0da7283088c5e03d475ffe2fdcb24a6d5b1 ] We hit a kernel OOPS. <3>[23898.789643] BUG: sleeping function called from invalid context at /data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103 <3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name: Thread-6683 <4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G W 3.0.8-137685-ge7742f9 #1 <4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.904225] Call Trace: <4>[23899.989209] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.000416] [<c1238c2a>] __might_sleep+0x10a/0x110 <4>[23900.007357] [<c1228021>] do_page_fault+0xd1/0x3c0 <4>[23900.013764] [<c18e9ba9>] ? restore_all+0xf/0xf <4>[23900.024024] [<c17c007b>] ? napi_complete+0x8b/0x690 <4>[23900.029297] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.123739] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.128955] [<c18ea0c3>] error_code+0x5f/0x64 <4>[23900.133466] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.138450] [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0 <4>[23900.144312] [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0 <4>[23900.150730] [<c17f63df>] ip_route_output_flow+0x1f/0x60 <4>[23900.156261] [<c181de58>] ip4_datagram_connect+0x188/0x2b0 <4>[23900.161960] [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30 <4>[23900.167834] [<c18298d6>] inet_dgram_connect+0x36/0x80 <4>[23900.173224] [<c14f9e88>] ? _copy_from_user+0x48/0x140 <4>[23900.178817] [<c17ab9da>] sys_connect+0x9a/0xd0 <4>[23900.183538] [<c132e93c>] ? alloc_file+0xdc/0x240 <4>[23900.189111] [<c123925d>] ? sub_preempt_count+0x3d/0x50 Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing fi. Other cpu might be accessing fi. Fixing it by delaying the releasing. With the patch, we ran MTBF testing on Android mobile for 12 hours and didn't trigger the issue. Thank Eric for very detailed review/checking the issue. Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Kun Jiang <kunx.jiang@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Do not use dead fib_info entries.David S. Miller2012-06-101-0/+2
| | | | | | | | | | | | | | [ Upstream commit dccd9ecc374462e5d6a5b8f8110415a86c2213d8 ] Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by: Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: do_tcp_sendpages() must try to push data out on oom conditionsWilly Tarreau2012-05-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bad115cfe5b509043b684d3a007ab54b80090aa1 upstream. Since recent changes on TCP splicing (starting with commits 2f533844 "tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp: tcp_sendpages() should call tcp_push() once"), I started seeing massive stalls when forwarding traffic between two sockets using splice() when pipe buffers were larger than socket buffers. Latest changes (net: netdev_alloc_skb() use build_skb()) made the problem even more apparent. The reason seems to be that if do_tcp_sendpages() fails on out of memory condition without being able to send at least one byte, tcp_push() is not called and the buffers cannot be flushed. After applying the attached patch, I cannot reproduce the stalls at all and the data rate it perfectly stable and steady under any condition which previously caused the problem to be permanent. The issue seems to have been there since before the kernel migrated to git, which makes me think that the stalls I occasionally experienced with tux during stress-tests years ago were probably related to the same issue. This issue was first encountered on 3.0.31 and 3.2.17, so please backport to -stable. Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: change tcp_adv_win_scale and tcp_rmem[2]Eric Dumazet2012-05-212-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b49960a05e32121d29316cfdf653894b88ac9190 ] tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix tcp_grow_window() for large incoming framesEric Dumazet2012-04-271-0/+1
| | | | | | | | | | | | | | | | | | | [ Upstream commit 4d846f02392a710f9604892ac3329e628e60a230 ] tcp_grow_window() has to grow rcv_ssthresh up to window_clamp, allowing sender to increase its window. tcp_grow_window() still assumes a tcp frame is under MSS, but its no longer true with LRO/GRO. This patch fixes one of the performance issue we noticed with GRO on. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix tcp_rcv_rtt_update() use of an unscaled RTT sampleNeal Cardwell2012-04-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 18a223e0b9ec8979320ba364b47c9772391d6d05 ] Fix a code path in tcp_rcv_rtt_update() that was comparing scaled and unscaled RTT samples. The intent in the code was to only use the 'm' measurement if it was a new minimum. However, since 'm' had not yet been shifted left 3 bits but 'new_sample' had, this comparison would nearly always succeed, leading us to erroneously set our receive-side RTT estimate to the 'm' sample when that sample could be nearly 8x too high to use. The overall effect is to often cause the receive-side RTT estimate to be significantly too large (up to 40% too large for brief periods in my tests). Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: allow splice() to build full TSO packetsEric Dumazet2012-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ This combines upstream commit 2f53384424251c06038ae612e56231b96ab610ee and the follow-on bug fix commit 35f9c09fe9c72eb8ca2b8e89a593e1c151f28fc2 ] vmsplice()/splice(pipe, socket) call do_tcp_sendpages() one page at a time, adding at most 4096 bytes to an skb. (assuming PAGE_SIZE=4096) The call to tcp_push() at the end of do_tcp_sendpages() forces an immediate xmit when pipe is not already filled, and tso_fragment() try to split these skb to MSS multiples. 4096 bytes are usually split in a skb with 2 MSS, and a remaining sub-mss skb (assuming MTU=1500) This makes slow start suboptimal because many small frames are sent to qdisc/driver layers instead of big ones (constrained by cwnd and packets in flight of course) In fact, applications using sendmsg() (adding an additional memory copy) instead of vmsplice()/splice()/sendfile() are a bit faster because of this anomaly, especially if serving small files in environments with large initial [c]wnd. Call tcp_push() only if MSG_MORE is not set in the flags parameter. This bit is automatically provided by splice() internals but for the last page, or on all pages if user specified SPLICE_F_MORE splice() flag. In some workloads, this can reduce number of sent logical packets by an order of magnitude, making zero-copy TCP actually faster than one-copy :) Reported-by: Tom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix syncookie regressionEric Dumazet2012-03-232-17/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dfd25ffffc132c00070eed64200e8950da5d7e9d ] commit ea4fc0d619 (ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit()) added a serious regression on synflood handling. Simon Kirby discovered a successful connection was delayed by 20 seconds before being responsive. In my tests, I discovered that xmit frames were lost, and needed ~4 retransmits and a socket dst rebuild before being really sent. In case of syncookie initiated connection, we use a different path to initialize the socket dst, and inet->cork.fl.u.ip4 is left cleared. As ip_queue_xmit() now depends on inet flow being setup, fix this by copying the temp flowi4 we use in cookie_v4_check(). Reported-by: Simon Kirby <sim@netnation.com> Bisected-by: Simon Kirby <sim@netnation.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_unaNeal Cardwell2012-03-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4648dc97af9d496218a05353b0e442b3dfa6aaab ] This commit fixes tcp_shift_skb_data() so that it does not shift SACKed data below snd_una. This fixes an issue whose symptoms exactly match reports showing tp->sacked_out going negative since 3.3.0-rc4 (see "WARNING: at net/ipv4/tcp_input.c:3418" thread on netdev). Since 2008 (832d11c5cd076abc0aa1eaf7be96c81d1a59ce41) tcp_shift_skb_data() had been shifting SACKed ranges that were below snd_una. It checked that the *end* of the skb it was about to shift from was above snd_una, but did not check that the end of the actual shifted range was above snd_una; this commit adds that check. Shifting SACKed ranges below snd_una is problematic because for such ranges tcp_sacktag_one() short-circuits: it does not declare anything as SACKed and does not increase sacked_out. Before the fixes in commits cc9a672ee522d4805495b98680f4a3db5d0a0af9 and daef52bab1fd26e24e8e9578f8fb33ba1d0cb412, shifting SACKed ranges below snd_una happened to work because tcp_shifted_skb() was always (incorrectly) passing in to tcp_sacktag_one() an skb whose end_seq tcp_shift_skb_data() had already guaranteed was beyond snd_una. Hence tcp_sacktag_one() never short-circuited and always increased tp->sacked_out in this case. After those two fixes, my testing has verified that shifting SACKed ranges below snd_una could cause tp->sacked_out to go negative with the following sequence of events: (1) tcp_shift_skb_data() sees an skb whose end_seq is beyond snd_una, then shifts a prefix of that skb that is below snd_una (2) tcp_shifted_skb() increments the packet count of the already-SACKed prev sk_buff (3) tcp_sacktag_one() sees the end of the new SACKed range is below snd_una, so it short-circuits and doesn't increase tp->sacked_out (5) tcp_clean_rtx_queue() sees the SACKed skb has been ACKed, decrements tp->sacked_out by this "inflated" pcount that was missing a matching increase in tp->sacked_out, and hence tp->sacked_out underflows to a u32 like 0xFFFFFFFF, which casted to s32 is negative. (6) this leads to the warnings seen in the recent "WARNING: at net/ipv4/tcp_input.c:3418" thread on the netdev list; e.g.: tcp_input.c:3418 WARN_ON((int)tp->sacked_out < 0); More generally, I think this bug can be tickled in some cases where two or more ACKs from the receiver are lost and then a DSACK arrives that is immediately above an existing SACKed skb in the write queue. This fix changes tcp_shift_skb_data() to abort this sequence at step (1) in the scenario above by noticing that the bytes are below snd_una and not shifting them. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: don't fragment SACKed skbs in tcp_mark_head_lost()Neal Cardwell2012-03-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c0638c247f559e1a16ee79e54df14bca2cb679ea ] In tcp_mark_head_lost() we should not attempt to fragment a SACKed skb to mark the first portion as lost. This is for two primary reasons: (1) tcp_shifted_skb() coalesces adjacent regions of SACKed skbs. When doing this, it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. But given that skbs can have remainders that do not align to MSS boundaries, this packet count preservation means that for SACKed skbs there is not necessarily a direct linear relationship between tcp_skb_pcount(skb) and skb->len. Thus tcp_mark_head_lost()'s previous attempts to fragment off and mark as lost a prefix of length (packets - oldcnt)*mss from SACKed skbs were leading to occasional failures of the WARN_ON(len > skb->len) in tcp_fragment() (which used to be a BUG_ON(); see the recent "crash in tcp_fragment" thread on netdev). (2) there is no real point in fragmenting off part of a SACKed skb and calling tcp_skb_mark_lost() on it, since tcp_skb_mark_lost() is a NOP for SACKed skbs. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix false reordering signal in tcp_shifted_skbNeal Cardwell2012-03-191-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4c90d3b30334833450ccbb02f452d4972a3c3c3f ] When tcp_shifted_skb() shifts bytes from the skb that is currently pointed to by 'highest_sack' then the increment of TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This implicit advancement, combined with the recent fix to pass the correct SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think that the newly SACKed range was before the tcp_highest_sack_seq(), leading to a call to tcp_update_reordering() with a degree of reordering matching the size of the newly SACKed range (typically just 1 packet, which is a NOP, but potentially larger). This commit fixes this by simply calling tcp_sacktag_one() before the TCP_SKB_CB(skb)->seq advancement that can advance our notion of the highest SACKed sequence. Correspondingly, we can simplify the code a little now that tcp_shifted_skb() should update the lost_cnt_hint in all cases where skb == tp->lost_skb_hint. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipsec: be careful of non existing mac headersEric Dumazet2012-03-192-8/+3
| | | | | | | | | | | | | | | | | [ Upstream commit 03606895cd98c0a628b17324fd7b5ff15db7e3cd ] Niccolo Belli reported ipsec crashes in case we handle a frame without mac header (atm in his case) Before copying mac header, better make sure it is present. Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809 Reported-by: Niccolò Belli <darkbasic@linuxsystems.it> Tested-by: Niccolò Belli <darkbasic@linuxsystems.it> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: fix redirect handlingEric Dumazet2012-02-291-51/+58
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9cc20b268a5a14f5e57b8ad405a83513ab0d78dc ] commit f39925dbde77 (ipv4: Cache learned redirect information in inetpeer.) introduced a regression in ICMP redirect handling. It assumed ipv4_dst_check() would be called because all possible routes were attached to the inetpeer we modify in ip_rt_redirect(), but thats not true. commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix this but solution was not complete. (It fixed only one route) So we must lookup existing routes (including different TOS values) and call check_peer_redir() on them. Reported-by: Ivan Zahariev <famzah@icdsoft.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* route: fix ICMP redirect validationFlavio Leitner2012-02-291-5/+31
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 7cc9150ebe8ec06cafea9f1c10d92ddacf88d8ae ] The commit f39925dbde7788cfb96419c0f092b086aa325c0f (ipv4: Cache learned redirect information in inetpeer.) removed some ICMP packet validations which are required by RFC 1122, section 3.2.2.2: ... A Redirect message SHOULD be silently discarded if the new gateway address it specifies is not on the same connected (sub-) net through which the Redirect arrived [INTRO:2, Appendix A], or if the source of the Redirect is not the current first-hop gateway for the specified destination (see Section 3.3.1). Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACKNeal Cardwell2012-02-291-0/+4
| | | | | | | | | | | | | | | | | [ Upstream commit 0af2a0d0576205dda778d25c6c344fc6508fc81d ] This commit ensures that lost_cnt_hint is correctly updated in tcp_shifted_skb() for FACK TCP senders. The lost_cnt_hint adjustment in tcp_sacktag_one() only applies to non-FACK senders, so FACK senders need their own adjustment. This applies the spirit of 1e5289e121372a3494402b1b131b41bfe1cf9b7f - except now that the sequence range passed into tcp_sacktag_one() is correct we need only have a special case adjustment for FACK. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix range tcp_shifted_skb() passes to tcp_sacktag_one()Neal Cardwell2012-02-291-9/+10
| | | | | | | | | | | | | | | | | | | | [ Upstream commit daef52bab1fd26e24e8e9578f8fb33ba1d0cb412 ] Fix the newly-SACKed range to be the range of newly-shifted bytes. Previously - since 832d11c5cd076abc0aa1eaf7be96c81d1a59ce41 - tcp_shifted_skb() incorrectly called tcp_sacktag_one() with the start and end sequence numbers of the skb it passes in set to the range just beyond the range that is newly-SACKed. This commit also removes a special-case adjustment to lost_cnt_hint in tcp_shifted_skb() since the pre-existing adjustment of lost_cnt_hint in tcp_sacktag_one() now properly handles this things now that the correct start sequence number is passed in. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: allow tcp_sacktag_one() to tag ranges not aligned with skbsNeal Cardwell2012-02-291-14/+22
| | | | | | | | | | | | | | | [ Upstream commit cc9a672ee522d4805495b98680f4a3db5d0a0af9 ] This commit allows callers of tcp_sacktag_one() to pass in sequence ranges that do not align with skb boundaries, as tcp_shifted_skb() needs to do in an upcoming fix in this patch series. In fact, now tcp_sacktag_one() does not need to depend on an input skb at all, which makes its semantics and dependencies more clear. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp_v4_send_reset: binding oif to iif in no sock caseShawn Lu2012-02-291-0/+5
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e2446eaab5585555a38ea0df4e01ff313dbb4ac9 ] Binding RST packet outgoing interface to incoming interface for tcp v4 when there is no socket associate with it. when sk is not NULL, using sk->sk_bound_dev_if instead. (suggested by Eric Dumazet). This has few benefits: 1. tcp_v6_send_reset already did that. 2. This helps tcp connect with SO_BINDTODEVICE set. When connection is lost, we still able to sending out RST using same interface. 3. we are sending reply, it is most likely to be succeed if iif is used Signed-off-by: Shawn Lu <shawn.lu@ericsson.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabledThomas Graf2012-02-291-1/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 70620c46ac2b45c24b0f22002fdf5ddd1f7daf81 ] Commit 653241 (net: RFC3069, private VLAN proxy arp support) changed the behavior of arp proxy to send arp replies back out on the interface the request came in even if the private VLAN feature is disabled. Previously we checked rt->dst.dev != skb->dev for in scenarios, when proxy arp is enabled on for the netdevice and also when individual proxy neighbour entries have been added. This patch adds the check back for the pneigh_lookup() scenario. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.Li Wei2012-02-291-1/+1
| | | | | | | | | | | | | | [ Upstream commit 5dc7883f2a7c25f8df40d7479687153558cd531b ] This patch fix a bug which introduced by commit ac8a4810 (ipv4: Save nexthop address of LSRR/SSRR option to IPCB.).In that patch, we saved the nexthop of SRR in ip_option->nexthop and update iph->daddr until we get to ip_forward_options(), but we need to update it before ip_rt_get_source(), otherwise we may get a wrong src. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Save nexthop address of LSRR/SSRR option to IPCB.Li Wei2012-02-292-3/+4
| | | | | | | | | | | | | | | | [ Upstream commit ac8a48106be49c422575ddc7531b776f8eb49610 ] We can not update iph->daddr in ip_options_rcv_srr(), It is too early. When some exception ocurred later (eg. in ip_forward() when goto sr_failed) we need the ip header be identical to the original one as ICMP need it. Add a field 'nexthop' in struct ip_options to save nexthop of LSRR or SSRR option. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: fix for ip_options_rcv_srr() daddr update.Li Wei2012-02-291-0/+1
| | | | | | | | | | | | [ Upstream commit b12f62efb8ec0b9523bdb6c2d412c07193086de9 ] When opt->srr_is_hit is set skb_rtable(skb) has been updated for 'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst holds, We need update iph->daddr either. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fix NULL dereferences in check_peer_redir()Eric Dumazet2012-02-134-28/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d3aaeb38c40e5a6c08dd31a1b64da65c4352be36, along with dependent backports of commits: 69cce1d1404968f78b177a0314f5822d5afdbbfb 9de79c127cccecb11ae6a21ab1499e87aa222880 218fa90f072e4aeff9003d57e390857f4f35513e 580da35a31f91a594f3090b7a2c39b85cb051a12 f7e57044eeb1841847c24aa06766c8290c202583 e049f28883126c689cf95859480d9ee4ab23b7fa ] Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925dbde778 (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: md5: using remote adress for md5 lookup in rst packetshawnlu2012-02-031-1/+1
| | | | | | | | | | | | [ Upstream commit 8a622e71f58ec9f092fc99eacae0e6cf14f6e742 ] md5 key is added in socket through remote address. remote address should be used in finding md5 key when sending out reset packet. Signed-off-by: shawnlu <shawn.lu@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix tcp_trim_head() to adjust segment count with skb MSSNeal Cardwell2012-02-031-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5b35e1e6e9ca651e6b291c96d1106043c9af314a ] This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ah: Don't return NET_XMIT_DROP on input.Nick Bowler2012-02-031-2/+0
| | | | | | | | | | | | | | | | commit 4b90a603a1b21d63cf743cc833680cb195a729f6 upstream. When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ah: Read nexthdr value before overwriting it in ahash input callback.Nick Bowler2012-01-251-2/+2
| | | | | | | | | | | | | commit b7ea81a58adc123a4e980cb0eff9eb5c144b5dc7 upstream. The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ah: Correctly pass error codes in ahash output callback.Nick Bowler2012-01-251-2/+0
| | | | | | | | | | | | | | | | | | commit 069294e813ed5f27f82613b027609bcda5f1b914 upstream. The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* igmp: Avoid zero delay when receiving odd mixture of IGMP queriesBen Hutchings2012-01-121-0/+2
| | | | | | | | | | | | | | | commit a8c1f65c79cbbb2f7da782d4c9d15639a9b94b27 upstream. Commit 5b7c84066733c5dfb0e4016d939757b38de189e4 ('ipv4: correct IGMP behavior on v3 query during v2-compatibility mode') added yet another case for query parsing, which can result in max_delay = 0. Substitute a value of 1, as in the usual v3 case. Reported-by: Simon McVittie <smcv@debian.org> References: http://bugs.debian.org/654876 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: using prefetch requires including prefetch.hStephen Rothwell2012-01-061-0/+1
| | | | | | | | | | [ Upstream commit b9eda06f80b0db61a73bd87c6b0eb67d8aca55ad ] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ipv4: reintroduce route cache garbage collectorEric Dumazet2012-01-061-0/+106
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 9f28a2fc0bd77511f649c0a788c7bf9a5fd04edb ] Commit 2c8cec5c10b (ipv4: Cache learned PMTU information in inetpeer) removed IP route cache garbage collector a bit too soon, as this gc was responsible for expired routes cleanup, releasing their neighbour reference. As pointed out by Robert Gladewitz, recent kernels can fill and exhaust their neighbour cache. Reintroduce the garbage collection, since we'll have to wait our neighbour lookups become refcount-less to not depend on this stuff. Reported-by: Robert Gladewitz <gladewitz@gmx.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ipv4: flush route cache after change accept_localWeiping Pan2012-01-061-0/+5
| | | | | | | | | | | | [ Upstream commit d01ff0a049f749e0bf10a35bb23edd012718c8c2 ] After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* net: have ipconfig not wait if no dev is availableGerlando Falauto2012-01-061-0/+4
| | | | | | | | | | | | | | | | | | [ Upstream commit cd7816d14953c8af910af5bb92f488b0b277e29d ] previous commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c makes IP-Config wait for carrier on at least one network device. Before waiting (predefined value 120s), check that at least one device was successfully brought up. Otherwise (e.g. buggy bootloader which does not set the MAC address) there is no point in waiting for carrier. Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ipip, sit: copy parms.name after register_netdeviceTed Feng2012-01-061-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 72b36015ba43a3cca5303f5534d2c3e1899eae29 upstream. Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tcp: properly update lost_cnt_hint during shiftingYan, Zheng2011-11-111-3/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 1e5289e121372a3494402b1b131b41bfe1cf9b7f ] lost_skb_hint is used by tcp_mark_head_lost() to mark the first unhandled skb. lost_cnt_hint is the number of packets or sacked packets before the lost_skb_hint; When shifting a skb that is before the lost_skb_hint, if tcp_is_fack() is ture, the skb has already been counted in the lost_cnt_hint; if tcp_is_fack() is false, tcp_sacktag_one() will increase the lost_cnt_hint. So tcp_shifted_skb() does not need to adjust the lost_cnt_hint by itself. When shifting a skb that is equal to lost_skb_hint, the shifted packets will not be counted by tcp_mark_head_lost(). So tcp_shifted_skb() should adjust the lost_cnt_hint even tcp_is_fack(tp) is true. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tcp: properly handle md5sig_pool referencesYan, Zheng2011-11-111-4/+7
| | | | | | | | | | | | | | [ Upstream commit 260fcbeb1ae9e768a44c9925338fbacb0d7e5ba9 ] tcp_v4_clear_md5_list() assumes that multiple tcp md5sig peers only hold one reference to md5sig_pool. but tcp_v4_md5_do_add() increases use count of md5sig_pool for each peer. This patch makes tcp_v4_md5_do_add() only increases use count for the first tcp md5sig peer. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ipv4: fix ipsec forward performance regressionYan, Zheng2011-11-111-7/+7
| | | | | | | | | | | | | [ Upstream commit b73233960a59ee66e09d642f13d0592b13651e94 ] There is bug in commit 5e2b61f(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reported-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.1 at 2025-01-28 04:00:12 +0000