From dc5a460a1bfa44273653700e33d4e7051194cbfd Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Sudhakar" Date: Fri, 21 Jan 2011 20:10:01 +0530 Subject: ASoC: da8xx/omap-l1xx: match codec_name with i2c ids The codec_name entry for da8xx evm in sound/soc/davinci/davinci-evm.c is not matching with the i2c ids in the board file. Without this fix the soundcard does not get detected on da850/omap-l138/am18x evm. Signed-off-by: Rajashekhara, Sudhakar Tested-by: Dan Sharon Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37) --- sound/soc/davinci/davinci-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 0c2d6ba..b36f0b3 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -223,7 +223,7 @@ static struct snd_soc_dai_link da8xx_evm_dai = { .stream_name = "AIC3X", .cpu_dai_name= "davinci-mcasp.0", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-0018", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, -- cgit v1.1 From 20a4e7fc7e213365ea3771d7bf1e10a6bab853be Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 21 Jan 2011 12:47:33 +0000 Subject: ASoC: Handle low measured DC offsets for wm_hubs devices The DC servo codes are actually signed numbers so need to be treated as such. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Cc: stable@kernel.org --- sound/soc/codecs/wm_hubs.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index c466982..613df5d 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -91,6 +91,7 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + s8 offset; u16 reg, reg_l, reg_r, dcs_cfg; /* If we're using a digital only path and have a previously @@ -149,16 +150,14 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) hubs->dcs_codes); /* HPOUT1L */ - if (reg_l + hubs->dcs_codes > 0 && - reg_l + hubs->dcs_codes < 0xff) - reg_l += hubs->dcs_codes; - dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + offset = reg_l; + offset += hubs->dcs_codes; + dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT; /* HPOUT1R */ - if (reg_r + hubs->dcs_codes > 0 && - reg_r + hubs->dcs_codes < 0xff) - reg_r += hubs->dcs_codes; - dcs_cfg |= reg_r; + offset = reg_r; + offset += hubs->dcs_codes; + dcs_cfg |= (u8)offset; dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg); -- cgit v1.1