From fdb0ac80618729e6b12121c66449b8532990eaf3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 13 Sep 2008 19:57:04 -0700 Subject: async_tx: make async_tx_run_dependencies() easier to read * Rename 'next' to 'dep' * Move the channel switch check inside the loop to simplify termination Acked-by: Ilya Yanok Signed-off-by: Dan Williams --- crypto/async_tx/async_tx.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c index e8362c1..dcbf1be 100644 --- a/crypto/async_tx/async_tx.c +++ b/crypto/async_tx/async_tx.c @@ -115,34 +115,32 @@ EXPORT_SYMBOL_GPL(dma_wait_for_async_tx); * (start) dependent operations on their target channel * @tx: transaction with dependencies */ -void -async_tx_run_dependencies(struct dma_async_tx_descriptor *tx) +void async_tx_run_dependencies(struct dma_async_tx_descriptor *tx) { - struct dma_async_tx_descriptor *next = tx->next; + struct dma_async_tx_descriptor *dep = tx->next; + struct dma_async_tx_descriptor *dep_next; struct dma_chan *chan; - if (!next) + if (!dep) return; - tx->next = NULL; - chan = next->chan; + chan = dep->chan; /* keep submitting up until a channel switch is detected * in that case we will be called again as a result of * processing the interrupt from async_tx_channel_switch */ - while (next && next->chan == chan) { - struct dma_async_tx_descriptor *_next; - - spin_lock_bh(&next->lock); - next->parent = NULL; - _next = next->next; - if (_next && _next->chan == chan) - next->next = NULL; - spin_unlock_bh(&next->lock); - - next->tx_submit(next); - next = _next; + for (; dep; dep = dep_next) { + spin_lock_bh(&dep->lock); + dep->parent = NULL; + dep_next = dep->next; + if (dep_next && dep_next->chan == chan) + dep->next = NULL; /* ->next will be submitted */ + else + dep_next = NULL; /* submit current dep and terminate */ + spin_unlock_bh(&dep->lock); + + dep->tx_submit(dep); } chan->device->device_issue_pending(chan); -- cgit v1.1 From 89f72a0633d1d4f28c4c5c8831ec814523d7671a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 13 Sep 2008 20:05:34 -0700 Subject: drivers/dma/ioat_dma.c: drop code after return The break after the return serves no purpose. Signed-off-by: Julia Lawall Reviewed-by: Richard Genoud Signed-off-by: Andrew Morton Signed-off-by: Dan Williams --- drivers/dma/ioat_dma.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index bc8c6e3..1ef68b3 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -971,11 +971,9 @@ static struct ioat_desc_sw *ioat_dma_get_next_descriptor( switch (ioat_chan->device->version) { case IOAT_VER_1_2: return ioat1_dma_get_next_descriptor(ioat_chan); - break; case IOAT_VER_2_0: case IOAT_VER_3_0: return ioat2_dma_get_next_descriptor(ioat_chan); - break; } return NULL; } -- cgit v1.1 From 6b3141962dc82cfe1c30afdf91d564b309859cbe Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 19 Sep 2008 04:16:19 -0700 Subject: dmatest: properly handle duplicate DMA channels Update the the dmatest driver so that it handles duplicate DMA channels properly. When a DMA client is notified of an available DMA channel, it must check if it has already allocated resources for that channel. If so, it should return DMA_DUP. This can happen, for example, if a DMA driver calls dma_async_device_register() more than once. Acked-by: Haavard Skinnemoen Signed-off-by: Timur Tabi Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index a08d197..422500c 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -325,6 +325,11 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) struct dmatest_thread *thread; unsigned int i; + /* Have we already been told about this channel? */ + list_for_each_entry(dtc, &dmatest_channels, node) + if (dtc->chan == chan) + return DMA_DUP; + dtc = kmalloc(sizeof(struct dmatest_chan), GFP_ATOMIC); if (!dtc) { pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); -- cgit v1.1 From 6fdb8bd47111d3f94be221082b725ec2dec1d5c7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 19 Sep 2008 04:16:23 -0700 Subject: drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL It was needlessly using the unreliable GFP_ATOMIC. Cc: Timur Tabi Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 422500c..d1e381e 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -330,7 +330,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) if (dtc->chan == chan) return DMA_DUP; - dtc = kmalloc(sizeof(struct dmatest_chan), GFP_ATOMIC); + dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); return DMA_NAK; -- cgit v1.1 From 59f647c25a4f27c1e5c84710e0608b36303089f9 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 23 Sep 2008 15:55:56 -0700 Subject: fsldma: remove internal self-test from Freescale Elo DMA driver The Freescale Elo DMA driver runs an internal self-test before registering the channels with the DMA engine. This self-test has a fundemental flaw in that it calls the DMA engine's callback functions directly before the registration. However, the registration initializes some variables that the callback functions uses, namely the device struct. The code works today because there are two device structs: the one created by the DMA engine, and one created by the Open Firmware (OF) subsystem. The self-test currently uses the device struct created by OF. However, in the future, some of the device structs created by OF will be eliminated. This means that the self-test will only have access to the device struct created by the DMA engine. But this device struct isn't initialized when the self-test runs, and this causes a kernel panic. Since there is already a DMA test module (dmatest), the internal self-test code is not useful anyway. It is extremely unlikely that the test will fail in normal usage. It may have been helpful during development, but not any more. Cc: Kumar Gala Cc: Li Yang Cc: Scott Wood Signed-off-by: Timur Tabi Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 132 --------------------------------------------------- 1 file changed, 132 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index c0059ca..e9b2638 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -786,132 +786,6 @@ static void dma_do_tasklet(unsigned long data) fsl_chan_ld_cleanup(fsl_chan); } -static void fsl_dma_callback_test(void *param) -{ - struct fsl_dma_chan *fsl_chan = param; - if (fsl_chan) - dev_dbg(fsl_chan->dev, "selftest: callback is ok!\n"); -} - -static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan) -{ - struct dma_chan *chan; - int err = 0; - dma_addr_t dma_dest, dma_src; - dma_cookie_t cookie; - u8 *src, *dest; - int i; - size_t test_size; - struct dma_async_tx_descriptor *tx1, *tx2, *tx3; - - test_size = 4096; - - src = kmalloc(test_size * 2, GFP_KERNEL); - if (!src) { - dev_err(fsl_chan->dev, - "selftest: Cannot alloc memory for test!\n"); - return -ENOMEM; - } - - dest = src + test_size; - - for (i = 0; i < test_size; i++) - src[i] = (u8) i; - - chan = &fsl_chan->common; - - if (fsl_dma_alloc_chan_resources(chan, NULL) < 1) { - dev_err(fsl_chan->dev, - "selftest: Cannot alloc resources for DMA\n"); - err = -ENODEV; - goto out; - } - - /* TX 1 */ - dma_src = dma_map_single(fsl_chan->dev, src, test_size / 2, - DMA_TO_DEVICE); - dma_dest = dma_map_single(fsl_chan->dev, dest, test_size / 2, - DMA_FROM_DEVICE); - tx1 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 2, 0); - async_tx_ack(tx1); - - cookie = fsl_dma_tx_submit(tx1); - fsl_dma_memcpy_issue_pending(chan); - msleep(2); - - if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) { - dev_err(fsl_chan->dev, "selftest: Time out!\n"); - err = -ENODEV; - goto free_resources; - } - - /* Test free and re-alloc channel resources */ - fsl_dma_free_chan_resources(chan); - - if (fsl_dma_alloc_chan_resources(chan, NULL) < 1) { - dev_err(fsl_chan->dev, - "selftest: Cannot alloc resources for DMA\n"); - err = -ENODEV; - goto free_resources; - } - - /* Continue to test - * TX 2 - */ - dma_src = dma_map_single(fsl_chan->dev, src + test_size / 2, - test_size / 4, DMA_TO_DEVICE); - dma_dest = dma_map_single(fsl_chan->dev, dest + test_size / 2, - test_size / 4, DMA_FROM_DEVICE); - tx2 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0); - async_tx_ack(tx2); - - /* TX 3 */ - dma_src = dma_map_single(fsl_chan->dev, src + test_size * 3 / 4, - test_size / 4, DMA_TO_DEVICE); - dma_dest = dma_map_single(fsl_chan->dev, dest + test_size * 3 / 4, - test_size / 4, DMA_FROM_DEVICE); - tx3 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0); - async_tx_ack(tx3); - - /* Interrupt tx test */ - tx1 = fsl_dma_prep_interrupt(chan, 0); - async_tx_ack(tx1); - cookie = fsl_dma_tx_submit(tx1); - - /* Test exchanging the prepared tx sort */ - cookie = fsl_dma_tx_submit(tx3); - cookie = fsl_dma_tx_submit(tx2); - - if (dma_has_cap(DMA_INTERRUPT, ((struct fsl_dma_device *) - dev_get_drvdata(fsl_chan->dev->parent))->common.cap_mask)) { - tx3->callback = fsl_dma_callback_test; - tx3->callback_param = fsl_chan; - } - fsl_dma_memcpy_issue_pending(chan); - msleep(2); - - if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) { - dev_err(fsl_chan->dev, "selftest: Time out!\n"); - err = -ENODEV; - goto free_resources; - } - - err = memcmp(src, dest, test_size); - if (err) { - for (i = 0; (*(src + i) == *(dest + i)) && (i < test_size); - i++); - dev_err(fsl_chan->dev, "selftest: Test failed, data %d/%ld is " - "error! src 0x%x, dest 0x%x\n", - i, (long)test_size, *(src + i), *(dest + i)); - } - -free_resources: - fsl_dma_free_chan_resources(chan); -out: - kfree(src); - return err; -} - static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, const struct of_device_id *match) { @@ -1000,17 +874,11 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, } } - err = fsl_dma_self_test(new_fsl_chan); - if (err) - goto err_self_test; - dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, match->compatible, new_fsl_chan->irq); return 0; -err_self_test: - free_irq(new_fsl_chan->irq, new_fsl_chan); err_no_irq: list_del(&new_fsl_chan->common.device_node); err_no_chan: -- cgit v1.1 From 77cd62e8082b9743b59ee1946a4c3ee2e3cd2bce Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 26 Sep 2008 17:00:11 -0700 Subject: fsldma: allow Freescale Elo DMA driver to be compiled as a module Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as a module. The primary change is to stop treating the DMA controller as a bus, and the DMA channels as devices on the bus. This is because the Open Firmware (OF) kernel code does not allow busses to be removed, so although we can call of_platform_bus_probe() to probe the DMA channels, there is no of_platform_bus_remove(). Instead, the DMA channels are manually probed, similar to what fsl_elbc_nand.c does. Cc: Scott Wood Acked-by: Li Yang Signed-off-by: Timur Tabi Signed-off-by: Dan Williams --- drivers/dma/Kconfig | 10 ++-- drivers/dma/fsldma.c | 138 ++++++++++++++++++++++++++++++++------------------- drivers/dma/fsldma.h | 1 + 3 files changed, 94 insertions(+), 55 deletions(-) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index cd30390..904e575 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -48,13 +48,13 @@ config DW_DMAC can be integrated in chips such as the Atmel AT32ap7000. config FSL_DMA - bool "Freescale MPC85xx/MPC83xx DMA support" - depends on PPC + tristate "Freescale Elo and Elo Plus DMA support" + depends on FSL_SOC select DMA_ENGINE ---help--- - Enable support for the Freescale DMA engine. Now, it support - MPC8560/40, MPC8555, MPC8548 and MPC8641 processors. - The MPC8349, MPC8360 is also supported. + Enable support for the Freescale Elo and Elo Plus DMA controllers. + The Elo is the DMA controller on some 82xx and 83xx parts, and the + Elo Plus is the DMA controller on 85xx and 86xx parts. config MV_XOR bool "Marvell XOR engine support" diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index e9b2638..0b95dcc 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -370,7 +370,10 @@ static int fsl_dma_alloc_chan_resources(struct dma_chan *chan, struct dma_client *client) { struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); - LIST_HEAD(tmp_list); + + /* Has this channel already been allocated? */ + if (fsl_chan->desc_pool) + return 1; /* We need the descriptor to be aligned to 32bytes * for meeting FSL DMA specification requirement. @@ -410,6 +413,8 @@ static void fsl_dma_free_chan_resources(struct dma_chan *chan) } spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); dma_pool_destroy(fsl_chan->desc_pool); + + fsl_chan->desc_pool = NULL; } static struct dma_async_tx_descriptor * @@ -786,33 +791,29 @@ static void dma_do_tasklet(unsigned long data) fsl_chan_ld_cleanup(fsl_chan); } -static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, - const struct of_device_id *match) +static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, + struct device_node *node, u32 feature, const char *compatible) { - struct fsl_dma_device *fdev; struct fsl_dma_chan *new_fsl_chan; int err; - fdev = dev_get_drvdata(dev->dev.parent); - BUG_ON(!fdev); - /* alloc channel */ new_fsl_chan = kzalloc(sizeof(struct fsl_dma_chan), GFP_KERNEL); if (!new_fsl_chan) { - dev_err(&dev->dev, "No free memory for allocating " + dev_err(fdev->dev, "No free memory for allocating " "dma channels!\n"); return -ENOMEM; } /* get dma channel register base */ - err = of_address_to_resource(dev->node, 0, &new_fsl_chan->reg); + err = of_address_to_resource(node, 0, &new_fsl_chan->reg); if (err) { - dev_err(&dev->dev, "Can't get %s property 'reg'\n", - dev->node->full_name); + dev_err(fdev->dev, "Can't get %s property 'reg'\n", + node->full_name); goto err_no_reg; } - new_fsl_chan->feature = *(u32 *)match->data; + new_fsl_chan->feature = feature; if (!fdev->feature) fdev->feature = new_fsl_chan->feature; @@ -822,13 +823,13 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, */ WARN_ON(fdev->feature != new_fsl_chan->feature); - new_fsl_chan->dev = &dev->dev; + new_fsl_chan->dev = &new_fsl_chan->common.dev; new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7; if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) { - dev_err(&dev->dev, "There is no %d channel!\n", + dev_err(fdev->dev, "There is no %d channel!\n", new_fsl_chan->id); err = -EINVAL; goto err_no_chan; @@ -862,20 +863,20 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, &fdev->common.channels); fdev->common.chancnt++; - new_fsl_chan->irq = irq_of_parse_and_map(dev->node, 0); + new_fsl_chan->irq = irq_of_parse_and_map(node, 0); if (new_fsl_chan->irq != NO_IRQ) { err = request_irq(new_fsl_chan->irq, &fsl_dma_chan_do_interrupt, IRQF_SHARED, "fsldma-channel", new_fsl_chan); if (err) { - dev_err(&dev->dev, "DMA channel %s request_irq error " - "with return %d\n", dev->node->full_name, err); + dev_err(fdev->dev, "DMA channel %s request_irq error " + "with return %d\n", node->full_name, err); goto err_no_irq; } } - dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, - match->compatible, new_fsl_chan->irq); + dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, + compatible, new_fsl_chan->irq); return 0; @@ -888,38 +889,20 @@ err_no_reg: return err; } -const u32 mpc8540_dma_ip_feature = FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN; -const u32 mpc8349_dma_ip_feature = FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN; - -static struct of_device_id of_fsl_dma_chan_ids[] = { - { - .compatible = "fsl,eloplus-dma-channel", - .data = (void *)&mpc8540_dma_ip_feature, - }, - { - .compatible = "fsl,elo-dma-channel", - .data = (void *)&mpc8349_dma_ip_feature, - }, - {} -}; - -static struct of_platform_driver of_fsl_dma_chan_driver = { - .name = "of-fsl-dma-channel", - .match_table = of_fsl_dma_chan_ids, - .probe = of_fsl_dma_chan_probe, -}; - -static __init int of_fsl_dma_chan_init(void) +static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan) { - return of_register_platform_driver(&of_fsl_dma_chan_driver); + free_irq(fchan->irq, fchan); + list_del(&fchan->common.device_node); + iounmap(fchan->reg_base); + kfree(fchan); } static int __devinit of_fsl_dma_probe(struct of_device *dev, const struct of_device_id *match) { int err; - unsigned int irq; struct fsl_dma_device *fdev; + struct device_node *child; fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL); if (!fdev) { @@ -953,9 +936,9 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending; fdev->common.dev = &dev->dev; - irq = irq_of_parse_and_map(dev->node, 0); - if (irq != NO_IRQ) { - err = request_irq(irq, &fsl_dma_do_interrupt, IRQF_SHARED, + fdev->irq = irq_of_parse_and_map(dev->node, 0); + if (fdev->irq != NO_IRQ) { + err = request_irq(fdev->irq, &fsl_dma_do_interrupt, IRQF_SHARED, "fsldma-device", fdev); if (err) { dev_err(&dev->dev, "DMA device request_irq error " @@ -965,7 +948,21 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, } dev_set_drvdata(&(dev->dev), fdev); - of_platform_bus_probe(dev->node, of_fsl_dma_chan_ids, &dev->dev); + + /* We cannot use of_platform_bus_probe() because there is no + * of_platform_bus_remove. Instead, we manually instantiate every DMA + * channel object. + */ + for_each_child_of_node(dev->node, child) { + if (of_device_is_compatible(child, "fsl,eloplus-dma-channel")) + fsl_dma_chan_probe(fdev, child, + FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN, + "fsl,eloplus-dma-channel"); + if (of_device_is_compatible(child, "fsl,elo-dma-channel")) + fsl_dma_chan_probe(fdev, child, + FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN, + "fsl,elo-dma-channel"); + } dma_async_device_register(&fdev->common); return 0; @@ -977,6 +974,30 @@ err_no_reg: return err; } +static int of_fsl_dma_remove(struct of_device *of_dev) +{ + struct fsl_dma_device *fdev; + unsigned int i; + + fdev = dev_get_drvdata(&of_dev->dev); + + dma_async_device_unregister(&fdev->common); + + for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) + if (fdev->chan[i]) + fsl_dma_chan_remove(fdev->chan[i]); + + if (fdev->irq != NO_IRQ) + free_irq(fdev->irq, fdev); + + iounmap(fdev->reg_base); + + kfree(fdev); + dev_set_drvdata(&of_dev->dev, NULL); + + return 0; +} + static struct of_device_id of_fsl_dma_ids[] = { { .compatible = "fsl,eloplus-dma", }, { .compatible = "fsl,elo-dma", }, @@ -984,15 +1005,32 @@ static struct of_device_id of_fsl_dma_ids[] = { }; static struct of_platform_driver of_fsl_dma_driver = { - .name = "of-fsl-dma", + .name = "fsl-elo-dma", .match_table = of_fsl_dma_ids, .probe = of_fsl_dma_probe, + .remove = of_fsl_dma_remove, }; static __init int of_fsl_dma_init(void) { - return of_register_platform_driver(&of_fsl_dma_driver); + int ret; + + pr_info("Freescale Elo / Elo Plus DMA driver\n"); + + ret = of_register_platform_driver(&of_fsl_dma_driver); + if (ret) + pr_err("fsldma: failed to register platform driver\n"); + + return ret; +} + +static void __exit of_fsl_dma_exit(void) +{ + of_unregister_platform_driver(&of_fsl_dma_driver); } -subsys_initcall(of_fsl_dma_chan_init); subsys_initcall(of_fsl_dma_init); +module_exit(of_fsl_dma_exit); + +MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 6faf07b..4f21a51 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -114,6 +114,7 @@ struct fsl_dma_device { struct dma_device common; struct fsl_dma_chan *chan[FSL_DMA_MAX_CHANS_PER_DEVICE]; u32 feature; /* The same as DMA channels */ + int irq; /* Channel IRQ */ }; /* Define macros for fsl_dma_chan->feature property */ -- cgit v1.1